diff options
Diffstat (limited to 'arch/arm/mach-ux500')
23 files changed, 632 insertions, 350 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 52af004..afb3706 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -28,6 +28,7 @@ config MACH_U8500 bool "U8500 Development platform" depends on UX500_SOC_DB8500 select TPS6105X + select SOC_BUS help Include support for the mop500 development platform. @@ -49,6 +50,12 @@ config MACH_U5500 depends on UX500_SOC_DB5500 help Include support for the U5500 development platform. + +config MACH_UX500_DT + bool "Generic U8500 support using device tree" + depends on MACH_U8500 + select USE_OF + endmenu config UX500_DEBUG_UART diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 6bd2f45..35b3894 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot index ff0a4b5..dd5cd00 100644 --- a/arch/arm/mach-ux500/Makefile.boot +++ b/arch/arm/mach-ux500/Makefile.boot @@ -2,3 +2,4 @@ params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 +dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 5dde4d4..479ebe0 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -104,7 +104,7 @@ static struct mmci_platform_data mop500_sdi0_data = { #endif }; -static void sdi0_configure(void) +static void sdi0_configure(struct device *parent) { int ret; @@ -123,15 +123,15 @@ static void sdi0_configure(void) gpio_direction_output(sdi0_en, 1); /* Add the device, force v2 to subrevision 1 */ - db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); } -void mop500_sdi_tc35892_init(void) +void mop500_sdi_tc35892_init(struct device *parent) { mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; sdi0_en = GPIO_SDMMC_EN; sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL; - sdi0_configure(); + sdi0_configure(parent); } /* @@ -246,12 +246,13 @@ static struct mmci_platform_data mop500_sdi4_data = { #endif }; -void __init mop500_sdi_init(void) +void __init mop500_sdi_init(struct device *parent) { /* PoP:ed eMMC */ - db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls @@ -259,31 +260,31 @@ void __init mop500_sdi_init(void) */ } -void __init snowball_sdi_init(void) +void __init snowball_sdi_init(struct device *parent) { /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; mop500_sdi0_data.cd_invert = true; sdi0_en = SNOWBALL_SDMMC_EN_GPIO; sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; - sdi0_configure(); + sdi0_configure(parent); } -void __init hrefv60_sdi_init(void) +void __init hrefv60_sdi_init(struct device *parent) { /* PoP:ed eMMC */ - db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; sdi0_en = HREFV60_SDMMC_EN_GPIO; sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; - sdi0_configure(); + sdi0_configure(parent); /* WLAN SDIO channel */ - db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID); + db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); } diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 5c00712..d0799d5 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -30,6 +30,9 @@ #include <linux/gpio_keys.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_platform.h> + #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -226,7 +229,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = { static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base) { - mop500_sdi_tc35892_init(); + struct device *parent = NULL; +#if 0 + /* FIXME: Is the sdi actually part of tc3589x? */ + parent = tc3589x->dev; +#endif + mop500_sdi_tc35892_init(parent); } static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = { @@ -353,12 +361,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); -static void __init mop500_i2c_init(void) +static void __init mop500_i2c_init(struct device *parent) { - db8500_add_i2c0(&u8500_i2c0_data); - db8500_add_i2c1(&u8500_i2c1_data); - db8500_add_i2c2(&u8500_i2c2_data); - db8500_add_i2c3(&u8500_i2c3_data); + db8500_add_i2c0(parent, &u8500_i2c0_data); + db8500_add_i2c1(parent, &u8500_i2c1_data); + db8500_add_i2c2(parent, &u8500_i2c2_data); + db8500_add_i2c3(parent, &u8500_i2c3_data); } static struct gpio_keys_button mop500_gpio_keys[] = { @@ -435,7 +443,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { }; #endif -static struct pl022_ssp_controller ssp0_platform_data = { +static struct pl022_ssp_controller ssp0_plat = { .bus_id = 0, #ifdef CONFIG_STE_DMA40 .enable_dma = 1, @@ -451,9 +459,9 @@ static struct pl022_ssp_controller ssp0_platform_data = { .num_chipselect = 5, }; -static void __init mop500_spi_init(void) +static void __init mop500_spi_init(struct device *parent) { - db8500_add_ssp0(&ssp0_platform_data); + db8500_add_ssp0(parent, &ssp0_plat); } #ifdef CONFIG_STE_DMA40 @@ -587,11 +595,11 @@ static struct amba_pl011_data uart2_plat = { #endif }; -static void __init mop500_uart_init(void) +static void __init mop500_uart_init(struct device *parent) { - db8500_add_uart0(&uart0_plat); - db8500_add_uart1(&uart1_plat); - db8500_add_uart2(&uart2_plat); + db8500_add_uart0(parent, &uart0_plat); + db8500_add_uart1(parent, &uart1_plat); + db8500_add_uart2(parent, &uart2_plat); } static struct platform_device *snowball_platform_devs[] __initdata = { @@ -603,21 +611,27 @@ static struct platform_device *snowball_platform_devs[] __initdata = { static void __init mop500_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - u8500_init_devices(); + parent = u8500_init_devices(); mop500_pins_init(); + /* FIXME: parent of ab8500 should be prcmu */ + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); - mop500_i2c_init(); - mop500_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + mop500_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -631,19 +645,24 @@ static void __init mop500_init_machine(void) static void __init snowball_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; - u8500_init_devices(); + parent = u8500_init_devices(); snowball_pins_init(); + for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) + snowball_platform_devs[i]->dev.parent = parent; + platform_add_devices(snowball_platform_devs, ARRAY_SIZE(snowball_platform_devs)); - mop500_i2c_init(); - snowball_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + snowball_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); @@ -656,7 +675,9 @@ static void __init snowball_init_machine(void) static void __init hrefv60_init_machine(void) { + struct device *parent = NULL; int i2c0_devs; + int i; /* * The HREFv60 board removed a GPIO expander and routed @@ -665,17 +686,20 @@ static void __init hrefv60_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - u8500_init_devices(); + parent = u8500_init_devices(); hrefv60_pins_init(); + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); - mop500_i2c_init(); - hrefv60_sdi_init(); - mop500_spi_init(); - mop500_uart_init(); + mop500_i2c_init(parent); + hrefv60_sdi_init(parent); + mop500_spi_init(parent); + mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -718,3 +742,94 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .handle_irq = gic_handle_irq, .init_machine = snowball_init_machine, MACHINE_END + +#ifdef CONFIG_MACH_UX500_DT + +struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), + OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), + {}, +}; + +static const struct of_device_id u8500_soc_node[] = { + /* only create devices below soc node */ + { .compatible = "stericsson,db8500", }, + { }, +}; + +static void __init u8500_init_machine(void) +{ + struct device *parent = NULL; + int i2c0_devs; + int i; + + parent = u8500_init_devices(); + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + + for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) + mop500_platform_devs[i]->dev.parent = parent; + for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) + snowball_platform_devs[i]->dev.parent = parent; + + /* automatically probe child nodes of db8500 device */ + of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent); + + if (of_machine_is_compatible("st-ericsson,mop500")) { + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + mop500_pins_init(); + + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + mop500_sdi_init(parent); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + snowball_pins_init(); + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + + snowball_sdi_init(parent); + } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { + /* + * The HREFv60 board removed a GPIO expander and routed + * all these GPIO pins to the internal GPIO controller + * instead. + */ + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + hrefv60_pins_init(); + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + hrefv60_sdi_init(parent); + } + mop500_i2c_init(parent); + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static const char * u8500_dt_board_compat[] = { + "calaosystems,snowball-a9500", + "st-ericsson,hrefv60+", + "st-ericsson,u8500", + "st-ericsson,mop500", + NULL, +}; + + +DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)") + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .handle_irq = gic_handle_irq, + .init_machine = u8500_init_machine, + .dt_compat = u8500_dt_board_compat, +MACHINE_END +#endif diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index f926d3d..3d594c2 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -75,10 +75,10 @@ struct i2c_board_info; -extern void mop500_sdi_init(void); -extern void snowball_sdi_init(void); -extern void hrefv60_sdi_init(void); -extern void mop500_sdi_tc35892_init(void); +extern void mop500_sdi_init(struct device *parent); +extern void snowball_sdi_init(struct device *parent); +extern void hrefv60_sdi_init(struct device *parent); +extern void mop500_sdi_tc35892_init(struct device *parent); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); void __init mop500_pins_init(void); diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c index 63c3f80..836112e 100644 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = { #endif }; -void __init u5500_sdi_init(void) +void __init u5500_sdi_init(struct device *parent) { nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins)); - db5500_add_sdi0(&u5500_sdi0_data); + db5500_add_sdi0(parent, &u5500_sdi0_data); } diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 9de9e9c..0ff4be7 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = { }, }; -static void __init u5500_i2c_init(void) +static void __init u5500_i2c_init(struct device *parent) { - db5500_add_i2c2(&u5500_i2c2_data); + db5500_add_i2c2(parent, &u5500_i2c2_data); i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices)); } @@ -126,20 +126,27 @@ static struct platform_device *u5500_platform_devices[] __initdata = { &ab5500_device, }; -static void __init u5500_uart_init(void) +static void __init u5500_uart_init(struct device *parent) { - db5500_add_uart0(NULL); - db5500_add_uart1(NULL); - db5500_add_uart2(NULL); + db5500_add_uart0(parent, NULL); + db5500_add_uart1(parent, NULL); + db5500_add_uart2(parent, NULL); } static void __init u5500_init_machine(void) { - u5500_init_devices(); + struct device *parent = NULL; + int i; + + parent = u5500_init_devices(); nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins)); - u5500_i2c_init(); - u5500_sdi_init(); - u5500_uart_init(); + + u5500_i2c_init(parent); + u5500_sdi_init(parent); + u5500_uart_init(parent); + + for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++) + u5500_platform_devices[i]->dev.parent = parent; platform_add_devices(u5500_platform_devices, ARRAY_SIZE(u5500_platform_devices)); diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index da5569d..77a75ed 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -5,6 +5,8 @@ */ #include <linux/io.h> +#include <linux/of.h> + #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <mach/hardware.h> @@ -45,7 +47,10 @@ static int __init ux500_l2x0_init(void) ux500_l2x0_unlock(); /* 64KB way size, 8 way associativity, force WA */ - l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + if (of_have_populated_dt()) + l2x0_of_init(0x3e060000, 0xc0000fff); + else + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); /* * We can't disable l2 as we are in non secure mode, currently diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 18aa5c05..bca47f3 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = { U5500_GPIOBANK7_BASE, }; -static void __init db5500_add_gpios(void) +static void __init db5500_add_gpios(struct device *parent) { struct nmk_gpio_platform_data pdata = { /* No custom data yet */ }; - dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base), + dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base), IRQ_DB5500_GPIO0, &pdata); } @@ -212,14 +212,36 @@ static int usb_db5500_tx_dma_cfg[] = { DB5500_DMA_DEV38_USB_OTG_OEP_8 }; -void __init u5500_init_devices(void) +static const char *db5500_read_soc_id(void) { - db5500_add_gpios(); + return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n"); +} + +static struct device * __init db5500_soc_device_init(void) +{ + const char *soc_id = db5500_read_soc_id(); + + return ux500_soc_device_init(soc_id); +} + +struct device * __init u5500_init_devices(void) +{ + struct device *parent; + int i; + + parent = db5500_soc_device_init(); + + db5500_add_gpios(parent); db5500_pmu_init(); - db5500_dma_init(); - db5500_add_rtc(); - db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); + db5500_dma_init(parent); + db5500_add_rtc(parent); + db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); + + for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++) + db5500_platform_devs[i]->dev.parent = parent; platform_add_devices(db5500_platform_devs, ARRAY_SIZE(db5500_platform_devs)); + + return parent; } diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 7176ee7..9bd8163 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -24,6 +24,7 @@ #include <mach/setup.h> #include <mach/devices.h> #include <mach/usb.h> +#include <mach/db8500-regs.h> #include "devices-db8500.h" #include "ste-dma40-db8500.h" @@ -132,13 +133,13 @@ static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK8_BASE, }; -static void __init db8500_add_gpios(void) +static void __init db8500_add_gpios(struct device *parent) { struct nmk_gpio_platform_data pdata = { .supports_sleepmode = true, }; - dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base), + dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); } @@ -164,17 +165,44 @@ static int usb_db8500_tx_dma_cfg[] = { DB8500_DMA_DEV39_USB_OTG_OEP_8 }; +static const char *db8500_read_soc_id(void) +{ + void __iomem *uid = __io_address(U8500_BB_UID_BASE); + + return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + readl((u32 *)uid+1), + readl((u32 *)uid+1), readl((u32 *)uid+2), + readl((u32 *)uid+3), readl((u32 *)uid+4)); +} + +static struct device * __init db8500_soc_device_init(void) +{ + const char *soc_id = db8500_read_soc_id(); + + return ux500_soc_device_init(soc_id); +} + /* * This function is called from the board init */ -void __init u8500_init_devices(void) +struct device * __init u8500_init_devices(void) { - db8500_add_rtc(); - db8500_add_gpios(); - db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + struct device *parent; + int i; + + parent = db8500_soc_device_init(); + + db8500_add_rtc(parent); + db8500_add_gpios(parent); + db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + + platform_device_register_data(parent, + "cpufreq-u8500", -1, NULL, 0); + + for (i = 0; i < ARRAY_SIZE(platform_devs); i++) + platform_devs[i]->dev.parent = parent; - platform_device_register_simple("cpufreq-u8500", -1, NULL, 0); platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - return ; + return parent; } diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index f418574..d11f389 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -2,6 +2,7 @@ * Copyright (C) ST-Ericsson SA 2010 * * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson * License terms: GNU General Public License (GPL) version 2 */ @@ -11,10 +12,15 @@ #include <linux/mfd/db8500-prcmu.h> #include <linux/mfd/db5500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/sys_soc.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/of.h> +#include <linux/of_irq.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> -#include <asm/localtimer.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -24,6 +30,11 @@ void __iomem *_PRCMU_BASE; +static const struct of_device_id ux500_dt_irq_match[] = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {}, +}; + void __init ux500_init_irq(void) { void __iomem *dist_base; @@ -38,7 +49,12 @@ void __init ux500_init_irq(void) } else ux500_unknown_soc(); - gic_init(0, 29, dist_base, cpu_base); +#ifdef CONFIG_OF + if (of_have_populated_dt()) + of_irq_init(ux500_dt_irq_match); + else +#endif + gic_init(0, 29, dist_base, cpu_base); /* * Init clocks here so that they are available for system timer @@ -50,3 +66,73 @@ void __init ux500_init_irq(void) db8500_prcmu_early_init(); clk_init(); } + +static const char * __init ux500_get_machine(void) +{ + return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber()); +} + +static const char * __init ux500_get_family(void) +{ + return kasprintf(GFP_KERNEL, "ux500"); +} + +static const char * __init ux500_get_revision(void) +{ + unsigned int rev = dbx500_revision(); + + if (rev == 0x01) + return kasprintf(GFP_KERNEL, "%s", "ED"); + else if (rev >= 0xA0) + return kasprintf(GFP_KERNEL, "%d.%d", + (rev >> 4) - 0xA + 1, rev & 0xf); + + return kasprintf(GFP_KERNEL, "%s", "Unknown"); +} + +static ssize_t ux500_get_process(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + if (dbx500_id.process == 0x00) + return sprintf(buf, "Standard\n"); + + return sprintf(buf, "%02xnm\n", dbx500_id.process); +} + +static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr, + const char *soc_id) +{ + soc_dev_attr->soc_id = soc_id; + soc_dev_attr->machine = ux500_get_machine(); + soc_dev_attr->family = ux500_get_family(); + soc_dev_attr->revision = ux500_get_revision(); +} + +struct device_attribute ux500_soc_attr = + __ATTR(process, S_IRUGO, ux500_get_process, NULL); + +struct device * __init ux500_soc_device_init(const char *soc_id) +{ + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return ERR_PTR(-ENOMEM); + + soc_info_populate(soc_dev_attr, soc_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr); + return NULL; + } + + parent = soc_device_to_device(soc_dev); + if (!IS_ERR_OR_NULL(parent)) + device_create_file(parent, &ux500_soc_attr); + + return parent; +} diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index 898a645..c5312a4 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -20,8 +20,9 @@ #include "devices-common.h" struct amba_device * -dbx500_add_amba_device(const char *name, resource_size_t base, - int irq, void *pdata, unsigned int periphid) +dbx500_add_amba_device(struct device *parent, const char *name, + resource_size_t base, int irq, void *pdata, + unsigned int periphid) { struct amba_device *dev; int ret; @@ -39,6 +40,8 @@ dbx500_add_amba_device(const char *name, resource_size_t base, dev->dev.platform_data = pdata; + dev->dev.parent = parent; + ret = amba_device_add(dev, &iomem_resource); if (ret) { amba_device_put(dev); @@ -49,60 +52,7 @@ dbx500_add_amba_device(const char *name, resource_size_t base, } static struct platform_device * -dbx500_add_platform_device(const char *name, int id, void *pdata, - struct resource *res, int resnum) -{ - struct platform_device *dev; - int ret; - - dev = platform_device_alloc(name, id); - if (!dev) - return ERR_PTR(-ENOMEM); - - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - dev->dev.dma_mask = &dev->dev.coherent_dma_mask; - - ret = platform_device_add_resources(dev, res, resnum); - if (ret) - goto out_free; - - dev->dev.platform_data = pdata; - - ret = platform_device_add(dev); - if (ret) - goto out_free; - - return dev; - -out_free: - platform_device_put(dev); - return ERR_PTR(ret); -} - -struct platform_device * -dbx500_add_platform_device_4k1irq(const char *name, int id, - resource_size_t base, - int irq, void *pdata) -{ - struct resource resources[] = { - [0] = { - .start = base, - .end = base + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - } - }; - - return dbx500_add_platform_device(name, id, pdata, resources, - ARRAY_SIZE(resources)); -} - -static struct platform_device * -dbx500_add_gpio(int id, resource_size_t addr, int irq, +dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq, struct nmk_gpio_platform_data *pdata) { struct resource resources[] = { @@ -118,13 +68,18 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq, } }; - return platform_device_register_resndata(NULL, "gpio", id, - resources, ARRAY_SIZE(resources), - pdata, sizeof(*pdata)); + return platform_device_register_resndata( + parent, + "gpio", + id, + resources, + ARRAY_SIZE(resources), + pdata, + sizeof(*pdata)); } -void dbx500_add_gpios(resource_size_t *base, int num, int irq, - struct nmk_gpio_platform_data *pdata) +void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, + int irq, struct nmk_gpio_platform_data *pdata) { int first = 0; int i; @@ -134,6 +89,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq, pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); pdata->num_gpio = 32; - dbx500_add_gpio(i, base[i], irq, pdata); + dbx500_add_gpio(parent, i, base[i], irq, pdata); } } diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 7825705..39c74ec 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -8,80 +8,89 @@ #ifndef __DEVICES_COMMON_H #define __DEVICES_COMMON_H -extern struct amba_device * -dbx500_add_amba_device(const char *name, resource_size_t base, - int irq, void *pdata, unsigned int periphid); +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/sys_soc.h> +#include <plat/i2c.h> -extern struct platform_device * -dbx500_add_platform_device_4k1irq(const char *name, int id, - resource_size_t base, - int irq, void *pdata); +extern struct amba_device * +dbx500_add_amba_device(struct device *parent, const char *name, + resource_size_t base, int irq, void *pdata, + unsigned int periphid); struct spi_master_cntlr; static inline struct amba_device * -dbx500_add_msp_spi(const char *name, resource_size_t base, int irq, +dbx500_add_msp_spi(struct device *parent, const char *name, + resource_size_t base, int irq, struct spi_master_cntlr *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, 0); } static inline struct amba_device * -dbx500_add_spi(const char *name, resource_size_t base, int irq, - struct spi_master_cntlr *pdata, +dbx500_add_spi(struct device *parent, const char *name, resource_size_t base, + int irq, struct spi_master_cntlr *pdata, u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, periphid); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, periphid); } struct mmci_platform_data; static inline struct amba_device * -dbx500_add_sdi(const char *name, resource_size_t base, int irq, - struct mmci_platform_data *pdata, - u32 periphid) +dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base, + int irq, struct mmci_platform_data *pdata, u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, periphid); + return dbx500_add_amba_device(parent, name, base, irq, + pdata, periphid); } struct amba_pl011_data; static inline struct amba_device * -dbx500_add_uart(const char *name, resource_size_t base, int irq, - struct amba_pl011_data *pdata) +dbx500_add_uart(struct device *parent, const char *name, resource_size_t base, + int irq, struct amba_pl011_data *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); } struct nmk_i2c_controller; static inline struct platform_device * -dbx500_add_i2c(int id, resource_size_t base, int irq, - struct nmk_i2c_controller *pdata) -{ - return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq, - pdata); -} - -struct msp_i2s_platform_data; - -static inline struct platform_device * -dbx500_add_msp_i2s(int id, resource_size_t base, int irq, - struct msp_i2s_platform_data *pdata) +dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq, + struct nmk_i2c_controller *data) { - return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq, - pdata); + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + struct platform_device_info pdevinfo = { + .parent = parent, + .name = "nmk-i2c", + .id = id, + .res = res, + .num_res = ARRAY_SIZE(res), + .data = data, + .size_data = sizeof(*data), + .dma_mask = DMA_BIT_MASK(32), + }; + + return platform_device_register_full(&pdevinfo); } static inline struct amba_device * -dbx500_add_rtc(resource_size_t base, int irq) +dbx500_add_rtc(struct device *parent, resource_size_t base, int irq) { - return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0); + return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0); } struct nmk_gpio_platform_data; -void dbx500_add_gpios(resource_size_t *base, int num, int irq, - struct nmk_gpio_platform_data *pdata); +void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, + int irq, struct nmk_gpio_platform_data *pdata); #endif diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index 0c4bccd..e709555 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -10,70 +10,90 @@ #include "devices-common.h" -#define db5500_add_i2c1(pdata) \ - dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) -#define db5500_add_i2c2(pdata) \ - dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) -#define db5500_add_i2c3(pdata) \ - dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) +#define db5500_add_i2c1(parent, pdata) \ + dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) +#define db5500_add_i2c2(parent, pdata) \ + dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) +#define db5500_add_i2c3(parent, pdata) \ + dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) -#define db5500_add_msp0_i2s(pdata) \ - dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_i2s(pdata) \ - dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_i2s(pdata) \ - dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata) +#define db5500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ + IRQ_DB5500_MSP0, pdata) +#define db5500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ + IRQ_DB5500_MSP1, pdata) +#define db5500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ + IRQ_DB5500_MSP2, pdata) -#define db5500_add_msp0_spi(pdata) \ - dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(pdata) \ - dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(pdata) \ - dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata) +#define db5500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ + IRQ_DB5500_MSP0, pdata) +#define db5500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ + IRQ_DB5500_MSP1, pdata) +#define db5500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ + IRQ_DB5500_MSP2, pdata) -#define db5500_add_rtc() \ - dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC); +#define db5500_add_rtc(parent) \ + dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC); -#define db5500_add_usb(rx_cfg, tx_cfg) \ - ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) +#define db5500_add_usb(parent, rx_cfg, tx_cfg) \ + ux500_add_usb(parent, U5500_USBOTG_BASE, \ + IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) -#define db5500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \ +#define db5500_add_sdi0(parent, pdata) \ + dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \ + IRQ_DB5500_SDMMC0, pdata, \ 0x10480180) -#define db5500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \ +#define db5500_add_sdi1(parent, pdata) \ + dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \ + IRQ_DB5500_SDMMC1, pdata, \ 0x10480180) -#define db5500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \ +#define db5500_add_sdi2(parent, pdata) \ + dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \ + IRQ_DB5500_SDMMC2, pdata \ 0x10480180) -#define db5500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \ +#define db5500_add_sdi3(parent, pdata) \ + dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \ + IRQ_DB5500_SDMMC3, pdata \ 0x10480180) -#define db5500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \ +#define db5500_add_sdi4(parent, pdata) \ + dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \ + IRQ_DB5500_SDMMC4, pdata \ 0x10480180) /* This one has a bad peripheral ID in the U5500 silicon */ -#define db5500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \ +#define db5500_add_spi0(parent, pdata) \ + dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \ + IRQ_DB5500_SPI0, pdata, \ 0x10080023) -#define db5500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \ +#define db5500_add_spi1(parent, pdata) \ + dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \ + IRQ_DB5500_SPI1, pdata, \ 0x10080023) -#define db5500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \ +#define db5500_add_spi2(parent, pdata) \ + dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \ + IRQ_DB5500_SPI2, pdata \ 0x10080023) -#define db5500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \ +#define db5500_add_spi3(parent, pdata) \ + dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \ + IRQ_DB5500_SPI3, pdata \ 0x10080023) -#define db5500_add_uart0(plat) \ - dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) -#define db5500_add_uart1(plat) \ - dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat) -#define db5500_add_uart2(plat) \ - dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat) -#define db5500_add_uart3(plat) \ - dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat) +#define db5500_add_uart0(parent, plat) \ + dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \ + IRQ_DB5500_UART0, plat) +#define db5500_add_uart1(parent, plat) \ + dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \ + IRQ_DB5500_UART1, plat) +#define db5500_add_uart2(parent, plat) \ + dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \ + IRQ_DB5500_UART2, plat) +#define db5500_add_uart3(parent, plat) \ + dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \ + IRQ_DB5500_UART3, plat) #endif diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index cbd4a9a..9fd93e9 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -14,88 +14,114 @@ struct ske_keypad_platform_data; struct pl022_ssp_controller; static inline struct platform_device * -db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata) +db8500_add_ske_keypad(struct device *parent, + struct ske_keypad_platform_data *pdata, + size_t size) { - return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1, - U8500_SKE_BASE, - IRQ_DB8500_KB, pdata); + struct resource resources[] = { + DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K), + DEFINE_RES_IRQ(IRQ_DB8500_KB), + }; + + return platform_device_register_resndata(parent, "nmk-ske-keypad", -1, + resources, 2, pdata, size); } static inline struct amba_device * -db8500_add_ssp(const char *name, resource_size_t base, int irq, - struct pl022_ssp_controller *pdata) +db8500_add_ssp(struct device *parent, const char *name, resource_size_t base, + int irq, struct pl022_ssp_controller *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(parent, name, base, irq, pdata, 0); } -#define db8500_add_i2c0(pdata) \ - dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) -#define db8500_add_i2c1(pdata) \ - dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) -#define db8500_add_i2c2(pdata) \ - dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) -#define db8500_add_i2c3(pdata) \ - dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) -#define db8500_add_i2c4(pdata) \ - dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) - -#define db8500_add_msp0_i2s(pdata) \ - dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_i2s(pdata) \ - dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_i2s(pdata) \ - dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_i2s(pdata) \ - dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) - -#define db8500_add_msp0_spi(pdata) \ - dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) -#define db8500_add_msp1_spi(pdata) \ - dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) -#define db8500_add_msp2_spi(pdata) \ - dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) -#define db8500_add_msp3_spi(pdata) \ - dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) - -#define db8500_add_rtc() \ - dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC); - -#define db8500_add_usb(rx_cfg, tx_cfg) \ - ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) - -#define db8500_add_sdi0(pdata, pid) \ - dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid) -#define db8500_add_sdi1(pdata, pid) \ - dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid) -#define db8500_add_sdi2(pdata, pid) \ - dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid) -#define db8500_add_sdi3(pdata, pid) \ - dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid) -#define db8500_add_sdi4(pdata, pid) \ - dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid) -#define db8500_add_sdi5(pdata, pid) \ - dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid) - -#define db8500_add_ssp0(pdata) \ - db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata) -#define db8500_add_ssp1(pdata) \ - db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata) - -#define db8500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0) -#define db8500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0) -#define db8500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0) -#define db8500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0) - -#define db8500_add_uart0(pdata) \ - dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) -#define db8500_add_uart1(pdata) \ - dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata) -#define db8500_add_uart2(pdata) \ - dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata) +#define db8500_add_i2c0(parent, pdata) \ + dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) +#define db8500_add_i2c1(parent, pdata) \ + dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) +#define db8500_add_i2c2(parent, pdata) \ + dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) +#define db8500_add_i2c3(parent, pdata) \ + dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) +#define db8500_add_i2c4(parent, pdata) \ + dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) + +#define db8500_add_msp0_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) +#define db8500_add_msp1_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) +#define db8500_add_msp2_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) +#define db8500_add_msp3_i2s(parent, pdata) \ + dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) + +#define db8500_add_msp0_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \ + IRQ_DB8500_MSP0, pdata) +#define db8500_add_msp1_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \ + IRQ_DB8500_MSP1, pdata) +#define db8500_add_msp2_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \ + IRQ_DB8500_MSP2, pdata) +#define db8500_add_msp3_spi(parent, pdata) \ + dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \ + IRQ_DB8500_MSP1, pdata) + +#define db8500_add_rtc(parent) \ + dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC); + +#define db8500_add_usb(parent, rx_cfg, tx_cfg) \ + ux500_add_usb(parent, U8500_USBOTG_BASE, \ + IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) + +#define db8500_add_sdi0(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \ + IRQ_DB8500_SDMMC0, pdata, pid) +#define db8500_add_sdi1(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \ + IRQ_DB8500_SDMMC1, pdata, pid) +#define db8500_add_sdi2(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \ + IRQ_DB8500_SDMMC2, pdata, pid) +#define db8500_add_sdi3(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \ + IRQ_DB8500_SDMMC3, pdata, pid) +#define db8500_add_sdi4(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \ + IRQ_DB8500_SDMMC4, pdata, pid) +#define db8500_add_sdi5(parent, pdata, pid) \ + dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \ + IRQ_DB8500_SDMMC5, pdata, pid) + +#define db8500_add_ssp0(parent, pdata) \ + db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \ + IRQ_DB8500_SSP0, pdata) +#define db8500_add_ssp1(parent, pdata) \ + db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \ + IRQ_DB8500_SSP1, pdata) + +#define db8500_add_spi0(parent, pdata) \ + dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \ + IRQ_DB8500_SPI0, pdata, 0) +#define db8500_add_spi1(parent, pdata) \ + dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \ + IRQ_DB8500_SPI1, pdata, 0) +#define db8500_add_spi2(parent, pdata) \ + dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \ + IRQ_DB8500_SPI2, pdata, 0) +#define db8500_add_spi3(parent, pdata) \ + dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \ + IRQ_DB8500_SPI3, pdata, 0) + +#define db8500_add_uart0(parent, pdata) \ + dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \ + IRQ_DB8500_UART0, pdata) +#define db8500_add_uart1(parent, pdata) \ + dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \ + IRQ_DB8500_UART1, pdata) +#define db8500_add_uart2(parent, pdata) \ + dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \ + IRQ_DB8500_UART2, pdata) #endif diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c index 1cfab68..41e9470 100644 --- a/arch/arm/mach-ux500/dma-db5500.c +++ b/arch/arm/mach-ux500/dma-db5500.c @@ -125,10 +125,11 @@ static struct platform_device dma40_device = { .resource = dma40_resources }; -void __init db5500_dma_init(void) +void __init db5500_dma_init(struct device *parent) { int ret; + dma40_device.dev.parent = parent; ret = platform_device_register(&dma40_device); if (ret) dev_err(&dma40_device.dev, "unable to register device: %d\n", ret); diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 80e10f5..9ec20b9 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -161,4 +161,7 @@ #define U8500_MODEM_BASE 0xe000000 #define U8500_APE_BASE 0x6000000 +/* SoC identification number information */ +#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) + #endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index a7d363f..3dc00ff 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -18,17 +18,16 @@ void __init ux500_map_io(void); extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern void __init u5500_init_devices(void); -extern void __init u8500_init_devices(void); +extern struct device * __init u5500_init_devices(void); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); -extern void __init u5500_sdi_init(void); +extern void __init u5500_sdi_init(struct device *parent); -extern void __init db5500_dma_init(void); +extern void __init db5500_dma_init(struct device *parent); -/* We re-use nomadik_timer for this platform */ -extern void nmdk_timer_init(void); +extern struct device *ux500_soc_device_init(const char *soc_id); struct amba_device; extern void __init amba_add_devices(struct amba_device *devs[], int num); diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h index d3739d4..4c1cc50 100644 --- a/arch/arm/mach-ux500/include/mach/usb.h +++ b/arch/arm/mach-ux500/include/mach/usb.h @@ -20,6 +20,6 @@ struct ux500_musb_board_data { bool (*dma_filter)(struct dma_chan *chan, void *filter_param); }; -void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, - int *dma_tx_cfg); +void ux500_add_usb(struct device *parent, resource_size_t base, + int irq, int *dma_rx_cfg, int *dma_tx_cfg); #endif diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c deleted file mode 100644 index 5ba1133..0000000 --- a/arch/arm/mach-ux500/localtimer.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2008-2009 ST-Ericsson - * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> - * - * This file is heavily based on relaview platform, almost a copy. - * - * Copyright (C) 2002 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/clockchips.h> - -#include <asm/irq.h> -#include <asm/smp_twd.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index aea467d..d37df98 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,29 +7,52 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/of.h> -#include <asm/localtimer.h> +#include <asm/smp_twd.h> #include <plat/mtu.h> #include <mach/setup.h> #include <mach/hardware.h> +#include <mach/irqs.h> + +#ifdef CONFIG_HAVE_ARM_TWD +static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer, + U5500_TWD_BASE, IRQ_LOCALTIMER); +static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, + U8500_TWD_BASE, IRQ_LOCALTIMER); + +static void __init ux500_twd_init(void) +{ + struct twd_local_timer *twd_local_timer; + int err; + + twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer : + &u8500_twd_local_timer; + + if (of_have_populated_dt()) + twd_local_timer_of_register(); + else { + err = twd_local_timer_register(twd_local_timer); + if (err) + pr_err("twd_local_timer_register failed %d\n", err); + } +} +#else +#define ux500_twd_init() do { } while(0) +#endif static void __init ux500_timer_init(void) { + void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; if (cpu_is_u5500()) { -#ifdef CONFIG_LOCAL_TIMERS - twd_base = __io_address(U5500_TWD_BASE); -#endif - mtu_base = __io_address(U5500_MTU0_BASE); + mtu_timer_base = __io_address(U5500_MTU0_BASE); prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE); } else if (cpu_is_u8500()) { -#ifdef CONFIG_LOCAL_TIMERS - twd_base = __io_address(U8500_TWD_BASE); -#endif - mtu_base = __io_address(U8500_MTU0_BASE); + mtu_timer_base = __io_address(U8500_MTU0_BASE); prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); } else { ux500_unknown_soc(); @@ -52,8 +75,9 @@ static void __init ux500_timer_init(void) * */ - nmdk_timer_init(); + nmdk_timer_init(mtu_timer_base); clksrc_dbx500_prcmu_init(prcmu_timer_base); + ux500_twd_init(); } static void ux500_timer_reset(void) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 9f9e1c2..a74af38 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -7,6 +7,7 @@ #include <linux/platform_device.h> #include <linux/usb/musb.h> #include <linux/dma-mapping.h> + #include <plat/ste_dma40.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -140,8 +141,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type) musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx]; } -void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, - int *dma_tx_cfg) +void ux500_add_usb(struct device *parent, resource_size_t base, int irq, + int *dma_rx_cfg, int *dma_tx_cfg) { ux500_musb_device.resource[0].start = base; ux500_musb_device.resource[0].end = base + SZ_64K - 1; @@ -151,5 +152,7 @@ void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg, ux500_usb_dma_update_rx_ch_config(dma_rx_cfg); ux500_usb_dma_update_tx_ch_config(dma_tx_cfg); + ux500_musb_device.dev.parent = parent; + platform_device_register(&ux500_musb_device); } |