diff options
Diffstat (limited to 'arch/arm')
115 files changed, 1348 insertions, 500 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index abba5b8..a02385b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H be avoided when possible. config PHYS_OFFSET - hex "Physical address of main memory" + hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + default DRAM_BASE if !MMU help Please provide the physical address corresponding to the location of main memory in your system. diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index f8766af..564cb8c 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -35,20 +35,19 @@ }; esdhc@70008000 { /* ESDHC2 */ - cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */ - wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */ + cd-gpios = <&gpio1 6 0>; + wp-gpios = <&gpio1 5 0>; status = "okay"; }; - uart2: uart@7000c000 { /* UART3 */ + uart3: uart@7000c000 { fsl,uart-has-rtscts; status = "okay"; }; ecspi@70010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ - <&gpio3 25 0>; /* GPIO4_25 */ + cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; status = "okay"; pmic: mc13892@0 { @@ -57,7 +56,7 @@ compatible = "fsl,mc13892"; spi-max-frequency = <6000000>; reg = <0>; - mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */ + mc13xxx-irq-gpios = <&gpio1 8 0>; fsl,mc13xxx-uses-regulator; }; @@ -91,12 +90,12 @@ reg = <0x73fa8000 0x4000>; }; - uart0: uart@73fbc000 { + uart1: uart@73fbc000 { fsl,uart-has-rtscts; status = "okay"; }; - uart1: uart@73fc0000 { + uart2: uart@73fc0000 { status = "okay"; }; }; @@ -127,7 +126,7 @@ power { label = "Power Button"; - gpios = <&gpio1 21 0>; + gpios = <&gpio2 21 0>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 327ab8e..6663986 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -14,9 +14,9 @@ / { aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; }; tzic: tz-interrupt-controller@e0000000 { @@ -86,7 +86,7 @@ status = "disabled"; }; - uart2: uart@7000c000 { /* UART3 */ + uart3: uart@7000c000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x7000c000 0x4000>; interrupts = <33>; @@ -117,7 +117,7 @@ }; }; - gpio0: gpio@73f84000 { /* GPIO1 */ + gpio1: gpio@73f84000 { compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; reg = <0x73f84000 0x4000>; interrupts = <50 51>; @@ -127,7 +127,7 @@ #interrupt-cells = <1>; }; - gpio1: gpio@73f88000 { /* GPIO2 */ + gpio2: gpio@73f88000 { compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; reg = <0x73f88000 0x4000>; interrupts = <52 53>; @@ -137,7 +137,7 @@ #interrupt-cells = <1>; }; - gpio2: gpio@73f8c000 { /* GPIO3 */ + gpio3: gpio@73f8c000 { compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; reg = <0x73f8c000 0x4000>; interrupts = <54 55>; @@ -147,7 +147,7 @@ #interrupt-cells = <1>; }; - gpio3: gpio@73f90000 { /* GPIO4 */ + gpio4: gpio@73f90000 { compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; reg = <0x73f90000 0x4000>; interrupts = <56 57>; @@ -171,14 +171,14 @@ status = "disabled"; }; - uart0: uart@73fbc000 { + uart1: uart@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; status = "disabled"; }; - uart1: uart@73fc0000 { + uart2: uart@73fc0000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fc0000 0x4000>; interrupts = <32>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 2ab7f80..2dccce4 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -29,8 +29,8 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ - cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */ - wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */ + cd-gpios = <&gpio1 1 0>; + wp-gpios = <&gpio1 9 0>; status = "okay"; }; }; @@ -44,7 +44,7 @@ reg = <0x53fa8000 0x4000>; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { status = "okay"; }; }; @@ -67,7 +67,7 @@ compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0xf4000000 0x2000000>; phy-mode = "mii"; - interrupt-parent = <&gpio1>; + interrupt-parent = <&gpio2>; interrupts = <31>; reg-io-width = <4>; smsc,irq-push-pull; @@ -79,34 +79,34 @@ home { label = "Home"; - gpios = <&gpio4 10 0>; /* GPIO5_10 */ + gpios = <&gpio5 10 0>; linux,code = <102>; /* KEY_HOME */ gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpio4 11 0>; /* GPIO5_11 */ + gpios = <&gpio5 11 0>; linux,code = <158>; /* KEY_BACK */ gpio-key,wakeup; }; program { label = "Program"; - gpios = <&gpio4 12 0>; /* GPIO5_12 */ + gpios = <&gpio5 12 0>; linux,code = <362>; /* KEY_PROGRAM */ gpio-key,wakeup; }; volume-up { label = "Volume Up"; - gpios = <&gpio4 13 0>; /* GPIO5_13 */ + gpios = <&gpio5 13 0>; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; - gpios = <&gpio3 0 0>; /* GPIO4_0 */ + gpios = <&gpio4 0 0>; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 3f3a881..5bac4aa 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -29,15 +29,14 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ - cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ - wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */ + cd-gpios = <&gpio3 13 0>; + wp-gpios = <&gpio3 14 0>; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */ - <&gpio2 19 0>; /* GPIO3_19 */ + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; flash: at45db321d@1 { @@ -61,8 +60,8 @@ }; esdhc@50020000 { /* ESDHC3 */ - cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */ - wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */ + cd-gpios = <&gpio3 11 0>; + wp-gpios = <&gpio3 12 0>; status = "okay"; }; }; @@ -76,7 +75,7 @@ reg = <0x53fa8000 0x4000>; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { status = "okay"; }; }; @@ -102,7 +101,7 @@ fec@63fec000 { phy-mode = "rmii"; - phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; }; @@ -113,7 +112,7 @@ green { label = "Heartbeat"; - gpios = <&gpio6 7 0>; /* GPIO7_7 */ + gpios = <&gpio7 7 0>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index ae6de6d..5c57c86 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -29,13 +29,13 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ - cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ + cd-gpios = <&gpio3 13 0>; status = "okay"; }; esdhc@50020000 { /* ESDHC3 */ - cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */ - wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */ + cd-gpios = <&gpio3 11 0>; + wp-gpios = <&gpio3 12 0>; status = "okay"; }; }; @@ -49,7 +49,7 @@ reg = <0x53fa8000 0x4000>; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { status = "okay"; }; }; @@ -84,7 +84,7 @@ fec@63fec000 { phy-mode = "rmii"; - phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; }; @@ -95,20 +95,20 @@ power { label = "Power Button"; - gpios = <&gpio0 8 0>; /* GPIO1_8 */ + gpios = <&gpio1 8 0>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; volume-up { label = "Volume Up"; - gpios = <&gpio1 14 0>; /* GPIO2_14 */ + gpios = <&gpio2 14 0>; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; - gpios = <&gpio1 15 0>; /* GPIO2_15 */ + gpios = <&gpio2 15 0>; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; @@ -118,7 +118,7 @@ user { label = "Heartbeat"; - gpios = <&gpio6 7 0>; /* GPIO7_7 */ + gpios = <&gpio7 7 0>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index b1c062e..c7ee86c 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -29,8 +29,8 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ - cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */ - wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */ + cd-gpios = <&gpio3 13 0>; + wp-gpios = <&gpio4 11 0>; status = "okay"; }; @@ -39,15 +39,14 @@ status = "okay"; }; - uart2: uart@5000c000 { /* UART3 */ + uart3: uart@5000c000 { fsl,uart-has-rtscts; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */ - <&gpio2 19 0>; /* GPIO3_19 */ + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; zigbee: mc1323@0 { @@ -91,11 +90,11 @@ reg = <0x53fa8000 0x4000>; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { status = "okay"; }; - uart1: uart@53fc0000 { /* UART2 */ + uart2: uart@53fc0000 { status = "okay"; }; }; @@ -145,7 +144,7 @@ fec@63fec000 { phy-mode = "rmii"; - phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */ + phy-reset-gpios = <&gpio7 6 0>; status = "okay"; }; }; @@ -156,13 +155,13 @@ volume-up { label = "Volume Up"; - gpios = <&gpio1 14 0>; /* GPIO2_14 */ + gpios = <&gpio2 14 0>; linux,code = <115>; /* KEY_VOLUMEUP */ }; volume-down { label = "Volume Down"; - gpios = <&gpio1 15 0>; /* GPIO2_15 */ + gpios = <&gpio2 15 0>; linux,code = <114>; /* KEY_VOLUMEDOWN */ }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 099cd84..5dd91b9 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -14,11 +14,11 @@ / { aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; }; tzic: tz-interrupt-controller@0fffc000 { @@ -88,7 +88,7 @@ status = "disabled"; }; - uart2: uart@5000c000 { /* UART3 */ + uart3: uart@5000c000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; interrupts = <33>; @@ -119,7 +119,7 @@ }; }; - gpio0: gpio@53f84000 { /* GPIO1 */ + gpio1: gpio@53f84000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53f84000 0x4000>; interrupts = <50 51>; @@ -129,7 +129,7 @@ #interrupt-cells = <1>; }; - gpio1: gpio@53f88000 { /* GPIO2 */ + gpio2: gpio@53f88000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53f88000 0x4000>; interrupts = <52 53>; @@ -139,7 +139,7 @@ #interrupt-cells = <1>; }; - gpio2: gpio@53f8c000 { /* GPIO3 */ + gpio3: gpio@53f8c000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53f8c000 0x4000>; interrupts = <54 55>; @@ -149,7 +149,7 @@ #interrupt-cells = <1>; }; - gpio3: gpio@53f90000 { /* GPIO4 */ + gpio4: gpio@53f90000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53f90000 0x4000>; interrupts = <56 57>; @@ -173,21 +173,21 @@ status = "disabled"; }; - uart0: uart@53fbc000 { /* UART1 */ + uart1: uart@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; interrupts = <31>; status = "disabled"; }; - uart1: uart@53fc0000 { /* UART2 */ + uart2: uart@53fc0000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fc0000 0x4000>; interrupts = <32>; status = "disabled"; }; - gpio4: gpio@53fdc000 { /* GPIO5 */ + gpio5: gpio@53fdc000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53fdc000 0x4000>; interrupts = <103 104>; @@ -197,7 +197,7 @@ #interrupt-cells = <1>; }; - gpio5: gpio@53fe0000 { /* GPIO6 */ + gpio6: gpio@53fe0000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53fe0000 0x4000>; interrupts = <105 106>; @@ -207,7 +207,7 @@ #interrupt-cells = <1>; }; - gpio6: gpio@53fe4000 { /* GPIO7 */ + gpio7: gpio@53fe4000 { compatible = "fsl,imx53-gpio", "fsl,imx31-gpio"; reg = <0x53fe4000 0x4000>; interrupts = <107 108>; @@ -226,7 +226,7 @@ status = "disabled"; }; - uart3: uart@53ff0000 { /* UART4 */ + uart4: uart@53ff0000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53ff0000 0x4000>; interrupts = <13>; @@ -241,7 +241,7 @@ reg = <0x60000000 0x10000000>; ranges; - uart4: uart@63f90000 { /* UART5 */ + uart5: uart@63f90000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x63f90000 0x4000>; interrupts = <86>; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 072974e..c3977e0 100644 --- a/arch/arm/boot/dts/imx6q-sabreauto.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -14,8 +14,8 @@ /include/ "imx6q.dtsi" / { - model = "Freescale i.MX6 Quad SABRE Automotive Board"; - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; + model = "Freescale i.MX6 Quad Armadillo2 Board"; + compatible = "fsl,imx6q-arm2", "fsl,imx6q"; chosen { bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait"; @@ -34,8 +34,8 @@ }; usdhc@02198000 { /* uSDHC3 */ - cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */ - wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */ + cd-gpios = <&gpio6 11 0>; + wp-gpios = <&gpio6 14 0>; status = "okay"; }; @@ -44,7 +44,7 @@ status = "okay"; }; - uart3: uart@021f0000 { /* UART4 */ + uart4: uart@021f0000 { status = "okay"; }; }; @@ -55,7 +55,7 @@ debug-led { label = "Heartbeat"; - gpios = <&gpio2 25 0>; /* GPIO3_25 */ + gpios = <&gpio3 25 0>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts new file mode 100644 index 0000000..08d920d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -0,0 +1,49 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Lite Board"; + compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + aips-bus@02100000 { /* AIPS2 */ + enet@02188000 { + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; + status = "okay"; + }; + + usdhc@02198000 { /* uSDHC3 */ + cd-gpios = <&gpio7 0 0>; + wp-gpios = <&gpio7 1 0>; + status = "okay"; + }; + + usdhc@0219c000 { /* uSDHC4 */ + cd-gpios = <&gpio2 6 0>; + wp-gpios = <&gpio2 7 0>; + status = "okay"; + }; + + uart2: uart@021e8000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 7dda599..263e8f3 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -14,11 +14,11 @@ / { aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; }; cpus { @@ -165,7 +165,7 @@ status = "disabled"; }; - uart0: uart@02020000 { /* UART1 */ + uart1: uart@02020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; @@ -247,7 +247,7 @@ interrupts = <0 55 0x04>; }; - gpio0: gpio@0209c000 { /* GPIO1 */ + gpio1: gpio@0209c000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x0209c000 0x4000>; interrupts = <0 66 0x04 0 67 0x04>; @@ -257,7 +257,7 @@ #interrupt-cells = <1>; }; - gpio1: gpio@020a0000 { /* GPIO2 */ + gpio2: gpio@020a0000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020a0000 0x4000>; interrupts = <0 68 0x04 0 69 0x04>; @@ -267,7 +267,7 @@ #interrupt-cells = <1>; }; - gpio2: gpio@020a4000 { /* GPIO3 */ + gpio3: gpio@020a4000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020a4000 0x4000>; interrupts = <0 70 0x04 0 71 0x04>; @@ -277,7 +277,7 @@ #interrupt-cells = <1>; }; - gpio3: gpio@020a8000 { /* GPIO4 */ + gpio4: gpio@020a8000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020a8000 0x4000>; interrupts = <0 72 0x04 0 73 0x04>; @@ -287,7 +287,7 @@ #interrupt-cells = <1>; }; - gpio4: gpio@020ac000 { /* GPIO5 */ + gpio5: gpio@020ac000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020ac000 0x4000>; interrupts = <0 74 0x04 0 75 0x04>; @@ -297,7 +297,7 @@ #interrupt-cells = <1>; }; - gpio5: gpio@020b0000 { /* GPIO6 */ + gpio6: gpio@020b0000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020b0000 0x4000>; interrupts = <0 76 0x04 0 77 0x04>; @@ -307,7 +307,7 @@ #interrupt-cells = <1>; }; - gpio6: gpio@020b4000 { /* GPIO7 */ + gpio7: gpio@020b4000 { compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio"; reg = <0x020b4000 0x4000>; interrupts = <0 78 0x04 0 79 0x04>; @@ -543,28 +543,28 @@ interrupts = <0 18 0x04>; }; - uart1: uart@021e8000 { /* UART2 */ + uart2: uart@021e8000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 0x04>; status = "disabled"; }; - uart2: uart@021ec000 { /* UART3 */ + uart3: uart@021ec000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 0x04>; status = "disabled"; }; - uart3: uart@021f0000 { /* UART4 */ + uart4: uart@021f0000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 0x04>; status = "disabled"; }; - uart4: uart@021f4000 { /* UART5 */ + uart5: uart@021f4000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 0x04>; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 11a4192..fccb470 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -67,7 +67,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set # CONFIG_MTD_CFI_I2 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7e7775..945a34f 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,12 +48,7 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_ARM_216MHZ=y -CONFIG_OMAP_ARM_195MHZ=y -CONFIG_OMAP_ARM_192MHZ=y CONFIG_OMAP_ARM_182MHZ=y -CONFIG_OMAP_ARM_168MHZ=y -# CONFIG_OMAP_ARM_60MHZ is not set # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_OMAP_CF=y diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index a5edf42..d1c3f3a 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -30,14 +30,15 @@ enum unwind_reason_code { }; struct unwind_idx { - unsigned long addr; + unsigned long addr_offset; unsigned long insn; }; struct unwind_table { struct list_head list; - struct unwind_idx *start; - struct unwind_idx *stop; + const struct unwind_idx *start; + const struct unwind_idx *origin; + const struct unwind_idx *stop; unsigned long begin_addr; unsigned long end_addr; }; @@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start, extern void unwind_table_del(struct unwind_table *tab); extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk); -#ifdef CONFIG_ARM_UNWIND -extern int __init unwind_init(void); -#else -static inline int __init unwind_init(void) -{ - return 0; -} -#endif - #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_ARM_UNWIND diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 172101a..5bb91bf 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -346,15 +346,15 @@ validate_group(struct perf_event *event) fake_pmu.used_mask = fake_used_mask; if (!validate_event(&fake_pmu, leader)) - return -ENOSPC; + return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { if (!validate_event(&fake_pmu, sibling)) - return -ENOSPC; + return -EINVAL; } if (!validate_event(&fake_pmu, event)) - return -ENOSPC; + return -EINVAL; return 0; } @@ -639,6 +639,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = { static int __devinit armpmu_device_probe(struct platform_device *pdev) { + if (!cpu_pmu) + return -ENODEV; + cpu_pmu->plat_device = pdev; return 0; } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 5c7094e..095d661 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -902,8 +902,6 @@ void __init setup_arch(char **cmdline_p) { struct machine_desc *mdesc; - unwind_init(); - setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) @@ -911,6 +909,12 @@ void __init setup_arch(char **cmdline_p) machine_desc = mdesc; machine_name = mdesc->name; +#ifdef CONFIG_ZONE_DMA + if (mdesc->dma_zone_size) { + extern unsigned long arm_dma_zone_size; + arm_dma_zone_size = mdesc->dma_zone_size; + } +#endif if (mdesc->restart_mode) reboot_setup(&mdesc->restart_mode); @@ -945,12 +949,6 @@ void __init setup_arch(char **cmdline_p) tcm_init(); -#ifdef CONFIG_ZONE_DMA - if (mdesc->dma_zone_size) { - extern unsigned long arm_dma_zone_size; - arm_dma_zone_size = mdesc->dma_zone_size; - } -#endif #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index e7e8365..00df012 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2); struct unwind_ctrl_block { unsigned long vrs[16]; /* virtual register set */ - unsigned long *insn; /* pointer to the current instructions word */ + const unsigned long *insn; /* pointer to the current instructions word */ int entries; /* number of entries left to interpret */ int byte; /* current byte number in the instructions word */ }; @@ -83,8 +83,9 @@ enum regs { PC = 15 }; -extern struct unwind_idx __start_unwind_idx[]; -extern struct unwind_idx __stop_unwind_idx[]; +extern const struct unwind_idx __start_unwind_idx[]; +static const struct unwind_idx *__origin_unwind_idx; +extern const struct unwind_idx __stop_unwind_idx[]; static DEFINE_SPINLOCK(unwind_lock); static LIST_HEAD(unwind_tables); @@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables); }) /* - * Binary search in the unwind index. The entries entries are + * Binary search in the unwind index. The entries are * guaranteed to be sorted in ascending order by the linker. + * + * start = first entry + * origin = first entry with positive offset (or stop if there is no such entry) + * stop - 1 = last entry */ -static struct unwind_idx *search_index(unsigned long addr, - struct unwind_idx *first, - struct unwind_idx *last) +static const struct unwind_idx *search_index(unsigned long addr, + const struct unwind_idx *start, + const struct unwind_idx *origin, + const struct unwind_idx *stop) { - pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last); + unsigned long addr_prel31; + + pr_debug("%s(%08lx, %p, %p, %p)\n", + __func__, addr, start, origin, stop); + + /* + * only search in the section with the matching sign. This way the + * prel31 numbers can be compared as unsigned longs. + */ + if (addr < (unsigned long)start) + /* negative offsets: [start; origin) */ + stop = origin; + else + /* positive offsets: [origin; stop) */ + start = origin; + + /* prel31 for address relavive to start */ + addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff; - if (addr < first->addr) { + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); + + /* + * As addr_prel31 is relative to start an offset is needed to + * make it relative to mid. + */ + if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) < + mid->addr_offset) + stop = mid; + else { + /* keep addr_prel31 relative to start */ + addr_prel31 -= ((unsigned long)mid - + (unsigned long)start); + start = mid; + } + } + + if (likely(start->addr_offset <= addr_prel31)) + return start; + else { pr_warning("unwind: Unknown symbol address %08lx\n", addr); return NULL; - } else if (addr >= last->addr) - return last; + } +} - while (first < last - 1) { - struct unwind_idx *mid = first + ((last - first + 1) >> 1); +static const struct unwind_idx *unwind_find_origin( + const struct unwind_idx *start, const struct unwind_idx *stop) +{ + pr_debug("%s(%p, %p)\n", __func__, start, stop); + while (start < stop) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); - if (addr < mid->addr) - last = mid; + if (mid->addr_offset >= 0x40000000) + /* negative offset */ + start = mid + 1; else - first = mid; + /* positive offset */ + stop = mid; } - - return first; + pr_debug("%s -> %p\n", __func__, stop); + return stop; } -static struct unwind_idx *unwind_find_idx(unsigned long addr) +static const struct unwind_idx *unwind_find_idx(unsigned long addr) { - struct unwind_idx *idx = NULL; + const struct unwind_idx *idx = NULL; unsigned long flags; pr_debug("%s(%08lx)\n", __func__, addr); - if (core_kernel_text(addr)) + if (core_kernel_text(addr)) { + if (unlikely(!__origin_unwind_idx)) + __origin_unwind_idx = + unwind_find_origin(__start_unwind_idx, + __stop_unwind_idx); + /* main unwind table */ idx = search_index(addr, __start_unwind_idx, - __stop_unwind_idx - 1); - else { + __origin_unwind_idx, + __stop_unwind_idx); + } else { /* module unwind tables */ struct unwind_table *table; @@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) if (addr >= table->begin_addr && addr < table->end_addr) { idx = search_index(addr, table->start, - table->stop - 1); + table->origin, + table->stop); /* Move-to-front to exploit common traces */ list_move(&table->list, &unwind_tables); break; @@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) int unwind_frame(struct stackframe *frame) { unsigned long high, low; - struct unwind_idx *idx; + const struct unwind_idx *idx; struct unwind_ctrl_block ctrl; /* only go to a higher address on the stack */ @@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, unsigned long text_size) { unsigned long flags; - struct unwind_idx *idx; struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL); pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size, @@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, if (!tab) return tab; - tab->start = (struct unwind_idx *)start; - tab->stop = (struct unwind_idx *)(start + size); + tab->start = (const struct unwind_idx *)start; + tab->stop = (const struct unwind_idx *)(start + size); + tab->origin = unwind_find_origin(tab->start, tab->stop); tab->begin_addr = text_addr; tab->end_addr = text_addr + text_size; - /* Convert the symbol addresses to absolute values */ - for (idx = tab->start; idx < tab->stop; idx++) - idx->addr = prel31_to_addr(&idx->addr); - spin_lock_irqsave(&unwind_lock, flags); list_add_tail(&tab->list, &unwind_tables); spin_unlock_irqrestore(&unwind_lock, flags); @@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab) kfree(tab); } - -int __init unwind_init(void) -{ - struct unwind_idx *idx; - - /* Convert the symbol addresses to absolute values */ - for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++) - idx->addr = prel31_to_addr(&idx->addr); - - pr_debug("unwind: ARM stack unwinding initialised\n"); - - return 0; -} diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 66591fa..ad93068 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b84a9f6..0d20677 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 25e3464..629fa97 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ae78f4d..a178b58 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ad017eb..d5fbac9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index 8f48660..ec164a4 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -19,7 +19,7 @@ #define BOARD_HAVE_NAND_16BIT (1 << 31) static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_16BIT; + return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; } #endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1d7d249..6659a90 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .asp_chan_q = EVENTQ_1, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1918ae7..46e1f41 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", .offset = 0, - .size = 28 * NAND_BLOCK_SIZE, + .size = 30 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { /* U-Boot environment */ diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e574d7f..635bf77 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vsclkdis_reg || !cpld_client) + if (!vpif_vidclkctl_reg || !cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(vpif_vidclkctl_reg); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, vpif_vidclkctl_reg); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0b68ed5..af27c13 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -161,7 +161,6 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DM646X_LPSC_C64X_CPU, - .flags = PSC_DSP, .usecount = 1, /* REVISIT how to disable? */ }; diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index fa59c09..8bc3fc2 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -233,7 +233,7 @@ #define PTCMD 0x120 #define PTSTAT 0x128 #define PDSTAT 0x200 -#define PDCTL1 0x304 +#define PDCTL 0x300 #define MDSTAT 0x800 #define MDCTL 0xA00 @@ -244,7 +244,10 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x3f +#define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) +#define PDCTL_NEXT BIT(1) +#define PDCTL_EPCGOOD BIT(8) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 1fb6bdf..d7e210f 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = PSC_STATE_ENABLE; @@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = __raw_readl(psc_base + PDSTAT); - if ((pdstat & 0x00000001) == 0) { - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x1; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); + if ((pdstat & PDSTAT_STATE_MASK) == 0) { + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_NEXT; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); @@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x100; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_EPCGOOD; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); } else { ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 97343df..85b5527 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -44,8 +44,6 @@ struct mct_clock_event_device { char name[10]; }; -static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); - static void exynos4_mct_write(unsigned int value, void *addr) { void __iomem *stat_addr; @@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void) } #ifdef CONFIG_LOCAL_TIMERS + +static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); + /* Clock event handling */ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) { @@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) void local_timer_stop(struct clock_event_device *evt) { + unsigned int cpu = smp_processor_id(); evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); if (mct_int_type == MCT_INT_SPI) - disable_irq(evt->irq); + if (cpu == 0) + remove_irq(evt->irq, &mct_tick0_event_irq); + else + remove_irq(evt->irq, &mct_tick1_event_irq); else disable_percpu_irq(IRQ_MCT_LOCALTIMER); } @@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void) clk_rate = clk_get_rate(mct_clk); +#ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; @@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void) WARN(err, "MCT: can't request IRQ %d (%d)\n", IRQ_MCT_LOCALTIMER, err); } +#endif /* CONFIG_LOCAL_TIMERS */ } static void __init exynos4_timer_init(void) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c44aa97..d0a2730 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -98,6 +98,7 @@ config MACH_SCB9328 config MACH_APF9328 bool "APF9328" select SOC_IMX1 + select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART help Say Yes here if you are using the Armadeus APF9328 development board diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index cfede57..5f4d06a 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -25,3 +25,6 @@ initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 + +dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ + imx6q-sabrelite.dtb diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 1e486e6..c71dbcc 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/dm9000.h> +#include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,6 +42,9 @@ static const int apf9328_pins[] __initconst = { PB29_PF_UART2_RTS, PB30_PF_UART2_TXD, PB31_PF_UART2_RXD, + /* I2C */ + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, }; /* @@ -103,6 +107,10 @@ static const struct imxuart_platform_data uart1_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static const struct imxi2c_platform_data apf9328_i2c_data __initconst = { + .bitrate = 100000, +}; + static struct platform_device *devices[] __initdata = { &apf9328_flash_device, &dm9000x_device, @@ -119,6 +127,8 @@ static void __init apf9328_init(void) imx1_add_imx_uart0(NULL); imx1_add_imx_uart1(&uart1_pdata); + imx1_add_imx_i2c(&apf9328_i2c_data); + platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9cd860a..bee6334 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -16,6 +16,8 @@ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/micrel_phy.h> #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> #include <asm/mach/arch.h> @@ -23,8 +25,27 @@ #include <mach/common.h> #include <mach/hardware.h> +/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ +static int ksz9021rn_phy_fixup(struct phy_device *phydev) +{ + /* min rx data delay */ + phy_write(phydev, 0x0b, 0x8105); + phy_write(phydev, 0x0c, 0x0000); + + /* max rx/tx clock delay, min rx/tx control delay */ + phy_write(phydev, 0x0b, 0x8104); + phy_write(phydev, 0x0c, 0xf0f0); + phy_write(phydev, 0x0b, 0x104); + + return 0; +} + static void __init imx6q_init_machine(void) { + if (of_machine_is_compatible("fsl,imx6q-sabrelite")) + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx6q_pm_init(); @@ -37,14 +58,15 @@ static void __init imx6q_map_io(void) imx6q_clock_map_io(); } -static void __init imx6q_gpio_add_irq_domain(struct device_node *np, +static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx6q gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx6q_irq_match[] __initconst = { @@ -71,7 +93,8 @@ static struct sys_timer imx6q_timer = { }; static const char *imx6q_dt_compat[] __initdata = { - "fsl,imx6q-sabreauto", + "fsl,imx6q-arm2", + "fsl,imx6q-sabrelite", NULL, }; diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index b8c54b8..00bb308 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -492,7 +492,7 @@ static struct mc13xxx_platform_data mc13783_pdata = { .regulators = mx31_3ds_regulators, .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), }, - .flags = MC13XXX_USE_TOUCHSCREEN, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC, }; /* SPI */ diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c index 24030d0..0fb7a17 100644 --- a/arch/arm/mach-msm/devices-iommu.c +++ b/arch/arm/mach-msm/devices-iommu.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/bootmem.h> +#include <linux/module.h> #include <mach/irqs.h> #include <mach/iommu.h> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 5c83760..24994bb 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); imx51_soc_init(); diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 6bea31a..64bbfce 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void) gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_evk_fec_pdata = { +static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 7678f77..237bdec 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void) gpio_set_value(LOCO_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_loco_fec_data = { +static const struct fec_platform_data mx53_loco_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 59c0845..d42132a 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void) gpio_set_value(SMD_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_smd_fec_data = { +static const struct fec_platform_data mx53_smd_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index ccc6158..596edd9 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -44,20 +44,22 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx51_tzic_add_irq_domain(struct device_node *np, +static int __init imx51_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx51_gpio_add_irq_domain(struct device_node *np, +static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 4; /* imx51 gets 4 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx51_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index ccaa0b8..85bfd5f 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -48,20 +48,22 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx53_tzic_add_irq_domain(struct device_node *np, +static int __init imx53_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx53_gpio_add_irq_domain(struct device_node *np, +static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx53 gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx53_irq_match[] __initconst = { diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 75d8611..30c7990 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -104,8 +104,8 @@ #define MX28_INT_CAN1 9 #define MX28_INT_LRADC_TOUCH 10 #define MX28_INT_HSADC 13 -#define MX28_INT_IRADC_THRESH0 14 -#define MX28_INT_IRADC_THRESH1 15 +#define MX28_INT_LRADC_THRESH0 14 +#define MX28_INT_LRADC_THRESH1 15 #define MX28_INT_LRADC_CH0 16 #define MX28_INT_LRADC_CH1 17 #define MX28_INT_LRADC_CH2 18 diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index 0d2d2b4..bde5f66 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -30,6 +30,7 @@ */ #define cpu_is_mx23() ( \ machine_is_mx23evk() || \ + machine_is_stmp378x() || \ 0) #define cpu_is_mx28() ( \ machine_is_mx28evk() || \ diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 3b1681e..6b00577 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = { MACHINE_START(M28EVK, "DENX M28 EVK") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = m28evk_init, .timer = &m28evk_timer, + .init_machine = m28evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index 177e531..6834dea 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = { MACHINE_START(STMP378X, "STMP378X") .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = stmp378x_dvb_init, .timer = &stmp378x_dvb_timer, + .init_machine = stmp378x_dvb_init, MACHINE_END diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 0fcff47..9a7b08b 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = { MX28_PAD_ENET0_CRS__ENET1_RX_EN, }; -static struct fec_platform_data tx28_fec0_data = { +static const struct fec_platform_data tx28_fec0_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -static struct fec_platform_data tx28_fec1_data = { +static const struct fec_platform_data tx28_fec1_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 1297bb5..9ff90a7 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -16,6 +16,8 @@ #include <linux/kernel.h> #include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> #include <linux/io.h> #include <asm/mach-types.h> /* for machine_is_* */ @@ -927,16 +929,22 @@ int __init omap1_clk_init(void) void __init omap1_clk_late_init(void) { - if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + unsigned long rate = ck_dpll1.rate; + + if (rate >= OMAP1_DPLL1_SANE_VALUE) return; + /* System booting at unusable rate, force reprogramming of DPLL1 */ + ck_dpll1_p->rate = 0; + /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); omap1_show_rates(); + loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); } diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b662513..5ca19d7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -76,8 +76,13 @@ config SOC_OMAP3430 default y select ARCH_OMAP_OTG -config SOC_OMAPTI816X - bool "TI816X support" +config SOC_OMAPTI81XX + bool "TI81XX support" + depends on ARCH_OMAP3 + default y + +config SOC_OMAPAM33XX + bool "AM33XX support" depends on ARCH_OMAP3 default y @@ -314,7 +319,12 @@ config MACH_OMAP_3630SDP config MACH_TI8168EVM bool "TI8168 Evaluation Module" - depends on SOC_OMAPTI816X + depends on SOC_OMAPTI81XX + default y + +config MACH_TI8148EVM + bool "TI8148 Evaluation Module" + depends on SOC_OMAPTI81XX default y config MACH_OMAP_4430SDP diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b009f17..6d226a7 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -232,6 +232,7 @@ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o +obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index ef2bbc0..b5d9c6f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -372,11 +372,17 @@ static struct platform_device sdp4430_vbat = { }, }; +static struct platform_device sdp4430_dmic_codec = { + .name = "dmic-codec", + .id = -1, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, + &sdp4430_dmic_codec, }; static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 510b6a2..b38cd7b 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -53,7 +53,8 @@ #include "hsmmc.h" #include "common-board-devices.h" -#define CM_T35_GPIO_PENDOWN 57 +#define CM_T35_GPIO_PENDOWN 57 +#define SB_T35_USB_HUB_RESET_GPIO 167 #define CM_T35_SMSC911X_CS 5 #define CM_T35_SMSC911X_GPIO 163 @@ -339,8 +340,10 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = { REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vdvi_supply[] = { - REGULATOR_SUPPLY("vdvi", "omapdss"), +static struct regulator_consumer_supply cm_t35_vio_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -373,6 +376,19 @@ static struct regulator_init_data cm_t35_vsim = { .consumer_supplies = cm_t35_vsim_supply, }; +static struct regulator_init_data cm_t35_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies), + .consumer_supplies = cm_t35_vio_supplies, +}; + static uint32_t cm_t35_keymap[] = { KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), @@ -421,6 +437,23 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +static void cm_t35_init_usbh(void) +{ + int err; + + err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO, + GPIOF_OUT_INIT_LOW, "usb hub rst"); + if (err) { + pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err); + } else { + udelay(10); + gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); + msleep(1); + } + + usbhs_init(&usbhs_bdata); +} + static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -456,17 +489,14 @@ static struct twl4030_platform_data cm_t35_twldata = { .gpio = &cm_t35_gpio_data, .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, + .vio = &cm_t35_vio, }; static void __init cm_t35_init_i2c(void) { omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - cm_t35_twldata.vpll2->constraints.name = "VDVI"; - cm_t35_twldata.vpll2->num_consumer_supplies = - ARRAY_SIZE(cm_t35_vdvi_supply); - cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply; + TWL_COMMON_REGULATOR_VDAC | + TWL_COMMON_PDATA_AUDIO); omap3_pmic_init("tps65930", &cm_t35_twldata); } @@ -570,24 +600,28 @@ static void __init cm_t3x_common_dss_mux_init(int mux_mode) static void __init cm_t35_init_mux(void) { - omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); - cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; + + omap_mux_init_signal("dss_data0.dss_data0", mux_mode); + omap_mux_init_signal("dss_data1.dss_data1", mux_mode); + omap_mux_init_signal("dss_data2.dss_data2", mux_mode); + omap_mux_init_signal("dss_data3.dss_data3", mux_mode); + omap_mux_init_signal("dss_data4.dss_data4", mux_mode); + omap_mux_init_signal("dss_data5.dss_data5", mux_mode); + cm_t3x_common_dss_mux_init(mux_mode); } static void __init cm_t3730_init_mux(void) { - omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); - cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; + + omap_mux_init_signal("sys_boot0", mux_mode); + omap_mux_init_signal("sys_boot1", mux_mode); + omap_mux_init_signal("sys_boot3", mux_mode); + omap_mux_init_signal("sys_boot4", mux_mode); + omap_mux_init_signal("sys_boot5", mux_mode); + omap_mux_init_signal("sys_boot6", mux_mode); + cm_t3x_common_dss_mux_init(mux_mode); } #else static inline void cm_t35_init_mux(void) {} @@ -612,7 +646,7 @@ static void __init cm_t3x_common_init(void) cm_t35_init_display(); usb_musb_init(NULL); - usbhs_init(&usbhs_bdata); + cm_t35_init_usbh(); } static void __init cm_t35_init(void) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index bd18d69..d67bcdf 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -15,6 +15,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/wl12xx.h> +#include <linux/spi/tsc2005.h> #include <linux/i2c.h> #include <linux/i2c/twl.h> #include <linux/clk.h> @@ -58,6 +59,9 @@ #define RX51_USB_TRANSCEIVER_RST_GPIO 67 +#define RX51_TSC2005_RESET_GPIO 104 +#define RX51_TSC2005_IRQ_GPIO 100 + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -66,6 +70,7 @@ enum { }; static struct wl12xx_platform_data wl1251_pdata; +static struct tsc2005_platform_data tsc2005_pdata; #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) static struct tsl2563_platform_data rx51_tsl2563_platform_data = { @@ -167,10 +172,10 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .modalias = "tsc2005", .bus_num = 1, .chip_select = 0, - /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/ + .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO), .max_speed_hz = 6000000, .controller_data = &tsc2005_mcspi_config, - /* .platform_data = &tsc2005_config,*/ + .platform_data = &tsc2005_pdata, }, }; @@ -193,7 +198,7 @@ static struct platform_device rx51_charger_device = { static void __init rx51_charger_init(void) { WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_LOW, "isp1704_reset")); + GPIOF_OUT_INIT_HIGH, "isp1704_reset")); platform_device_register(&rx51_charger_device); } @@ -1086,6 +1091,42 @@ error: */ } +static struct tsc2005_platform_data tsc2005_pdata = { + .ts_pressure_max = 2048, + .ts_pressure_fudge = 2, + .ts_x_max = 4096, + .ts_x_fudge = 4, + .ts_y_max = 4096, + .ts_y_fudge = 7, + .ts_x_plate_ohm = 280, + .esd_timeout_ms = 8000, +}; + +static void rx51_tsc2005_set_reset(bool enable) +{ + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); +} + +static void __init rx51_init_tsc2005(void) +{ + int r; + + r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ"); + if (r < 0) { + printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ"); + rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0; + } + + r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, + "tsc2005 reset"); + if (r >= 0) { + tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; + } else { + printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset"); + tsc2005_pdata.esd_timeout_ms = 0; + } +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1094,6 +1135,7 @@ void __init rx51_peripherals_init(void) board_smc91x_init(); rx51_add_gpio_keys(); rx51_init_wl1251(); + rx51_init_tsc2005(); rx51_init_si4713(); spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index 8402b39..5b6ad6e 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -1,5 +1,5 @@ /* - * Code for TI8168 EVM. + * Code for TI8168/TI8148 EVM. * * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ * @@ -23,29 +23,43 @@ #include <plat/irqs.h> #include <plat/board.h> #include "common.h" +#include <plat/usb.h> -static struct omap_board_config_kernel ti8168_evm_config[] __initdata = { +static struct omap_musb_board_data musb_board_data = { + .set_phy_power = ti81xx_musb_phy_power, + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 500, }; -static void __init ti8168_evm_init(void) +static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = { +}; + +static void __init ti81xx_evm_init(void) { omap_serial_init(); omap_sdrc_init(NULL, NULL); - omap_board_config = ti8168_evm_config; - omap_board_config_size = ARRAY_SIZE(ti8168_evm_config); -} - -static void __init ti8168_evm_map_io(void) -{ - omapti816x_map_common_io(); + omap_board_config = ti81xx_evm_config; + omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config); + usb_musb_init(&musb_board_data); } MACHINE_START(TI8168EVM, "ti8168evm") /* Maintainer: Texas Instruments */ .atag_offset = 0x100, - .map_io = ti8168_evm_map_io, - .init_early = ti816x_init_early, - .init_irq = ti816x_init_irq, + .map_io = ti81xx_map_io, + .init_early = ti81xx_init_early, + .init_irq = ti81xx_init_irq, + .timer = &omap3_timer, + .init_machine = ti81xx_evm_init, +MACHINE_END + +MACHINE_START(TI8148EVM, "ti8148evm") + /* Maintainer: Texas Instruments */ + .atag_offset = 0x100, + .map_io = ti81xx_map_io, + .init_early = ti81xx_init_early, + .init_irq = ti81xx_init_irq, .timer = &omap3_timer, - .init_machine = ti8168_evm_init, + .init_machine = ti81xx_evm_init, MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 1f3481f..f57ed5b 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -35,7 +35,7 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -u8 cpu_mask; +u16 cpu_mask; /* * clkdm_control: if true, then when a clock is enabled in the diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2311bc2..b8c2a68 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -132,7 +132,7 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name, const char *core_ck_name, const char *mpu_ck_name); -extern u8 cpu_mask; +extern u16 cpu_mask; extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_dummy; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 5d0064a..60424f4 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3517,6 +3517,10 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_ti816x()) { cpu_mask = RATE_IN_TI816X; cpu_clkflg = CK_TI816X; + } else if (cpu_is_am33xx()) { + cpu_mask = RATE_IN_AM33XX; + } else if (cpu_is_ti814x()) { + cpu_mask = RATE_IN_TI814X; } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; @@ -3600,7 +3604,7 @@ int __init omap3xxx_clk_init(void) * Lock DPLL5 -- here only until other device init code can * handle this */ - if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0)) + if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0)) omap3_clk_lock_dpll5(); /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 684b8a7..aaf4211 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -110,23 +110,49 @@ void __init omap3_map_io(void) /* * Adjust TAP register base such that omap3_check_revision accesses the correct - * TI816X register for checking device ID (it adds 0x204 to tap base while - * TI816X DEVICE ID register is at offset 0x600 from control base). + * TI81XX register for checking device ID (it adds 0x204 to tap base while + * TI81XX DEVICE ID register is at offset 0x600 from control base). */ -#define TI816X_TAP_BASE (TI816X_CTRL_BASE + \ - TI816X_CONTROL_DEVICE_ID - 0x204) +#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \ + TI81XX_CONTROL_DEVICE_ID - 0x204) -static struct omap_globals ti816x_globals = { +static struct omap_globals ti81xx_globals = { .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), }; -void __init omap2_set_globals_ti816x(void) +void __init omap2_set_globals_ti81xx(void) { - __omap2_set_globals(&ti816x_globals); + __omap2_set_globals(&ti81xx_globals); +} + +void __init ti81xx_map_io(void) +{ + omapti81xx_map_common_io(); +} + +#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \ + TI81XX_CONTROL_DEVICE_ID - 0x204) + +static struct omap_globals am33xx_globals = { + .class = AM335X_CLASS, + .tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE), + .ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), + .prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), + .cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), +}; + +void __init omap2_set_globals_am33xx(void) +{ + __omap2_set_globals(&am33xx_globals); +} + +void __init am33xx_map_io(void) +{ + omapam33xx_map_common_io(); } #endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 012bac7..4b2b416 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -52,10 +52,18 @@ static inline void omap34xx_map_common_io(void) } #endif -#ifdef CONFIG_SOC_OMAPTI816X -extern void omapti816x_map_common_io(void); +#ifdef CONFIG_SOC_OMAPTI81XX +extern void omapti81xx_map_common_io(void); #else -static inline void omapti816x_map_common_io(void) +static inline void omapti81xx_map_common_io(void) +{ +} +#endif + +#ifdef CONFIG_SOC_OMAPAM33XX +extern void omapam33xx_map_common_io(void); +#else +static inline void omapam33xx_map_common_io(void) { } #endif @@ -82,7 +90,7 @@ void omap35xx_init_early(void); void omap3630_init_early(void); void omap3_init_early(void); /* Do not use this one */ void am35xx_init_early(void); -void ti816x_init_early(void); +void ti81xx_init_early(void); void omap4430_init_early(void); /* @@ -106,7 +114,8 @@ void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); void omap2_set_globals_3xxx(void); void omap2_set_globals_443x(void); -void omap2_set_globals_ti816x(void); +void omap2_set_globals_ti81xx(void); +void omap2_set_globals_am33xx(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); @@ -117,7 +126,9 @@ void omap2_set_globals_prcm(struct omap_globals *); void omap242x_map_io(void); void omap243x_map_io(void); void omap3_map_io(void); +void am33xx_map_io(void); void omap4_map_io(void); +void ti81xx_map_io(void); /** * omap_test_timeout - busy-loop, testing a condition @@ -146,7 +157,7 @@ extern struct device *omap4_get_dsp_device(void); void omap2_init_irq(void); void omap3_init_irq(void); -void ti816x_init_irq(void); +void ti81xx_init_irq(void); extern int omap_irq_pending(void); void omap_intc_save_context(void); void omap_intc_restore_context(void); diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index d4ef75d..0ba68d3 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -52,8 +52,8 @@ #define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 #define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 -/* TI816X spefic control submodules */ -#define TI816X_CONTROL_DEVCONF 0x600 +/* TI81XX spefic control submodules */ +#define TI81XX_CONTROL_DEVCONF 0x600 /* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ @@ -244,8 +244,8 @@ #define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 #define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 -/* TI816X CONTROL_DEVCONF register offsets */ -#define TI816X_CONTROL_DEVICE_ID (TI816X_CONTROL_DEVCONF + 0x000) +/* TI81XX CONTROL_DEVCONF register offsets */ +#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000) /* * REVISIT: This list of registers is not comprehensive - there are more diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c15cfad..35d5dff 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -336,6 +336,27 @@ static void omap_init_mcpdm(void) static inline void omap_init_mcpdm(void) {} #endif +#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \ + defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE) + +static void omap_init_dmic(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("dmic"); + if (!oh) { + printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + return; + } + + pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n"); +} +#else +static inline void omap_init_dmic(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -681,6 +702,7 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_mcpdm(); + omap_init_dmic(); omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 27ad722..6c58266 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -226,7 +226,7 @@ static void __init omap4_check_features(void) } } -static void __init ti816x_check_features(void) +static void __init ti81xx_check_features(void) { omap_features = OMAP3_HAS_NEON; } @@ -340,6 +340,29 @@ static void __init omap3_check_revision(const char **cpu_rev) break; } break; + case 0xb944: + omap_revision = AM335X_REV_ES1_0; + *cpu_rev = "1.0"; + case 0xb8f2: + switch (rev) { + case 0: + /* FALLTHROUGH */ + case 1: + omap_revision = TI8148_REV_ES1_0; + *cpu_rev = "1.0"; + break; + case 2: + omap_revision = TI8148_REV_ES2_0; + *cpu_rev = "2.0"; + break; + case 3: + /* FALLTHROUGH */ + default: + omap_revision = TI8148_REV_ES2_1; + *cpu_rev = "2.1"; + break; + } + break; default: /* Unknown default to latest silicon rev as default */ omap_revision = OMAP3630_REV_ES1_2; @@ -367,7 +390,7 @@ static void __init omap4_check_revision(void) * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0 * Use ARM register to detect the correct ES version */ - if (!rev && (hawkeye != 0xb94e)) { + if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) { idcode = read_cpuid(CPUID_ID); rev = (idcode & 0xf) - 1; } @@ -389,8 +412,11 @@ static void __init omap4_check_revision(void) omap_revision = OMAP4430_REV_ES2_1; break; case 4: - default: omap_revision = OMAP4430_REV_ES2_2; + break; + case 6: + default: + omap_revision = OMAP4430_REV_ES2_3; } break; case 0xb94e: @@ -401,9 +427,17 @@ static void __init omap4_check_revision(void) break; } break; + case 0xb975: + switch (rev) { + case 0: + default: + omap_revision = OMAP4470_REV_ES1_0; + break; + } + break; default: /* Unknown default to latest silicon rev as default */ - omap_revision = OMAP4430_REV_ES2_2; + omap_revision = OMAP4430_REV_ES2_3; } pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16, @@ -432,6 +466,10 @@ static void __init omap3_cpuinfo(const char *cpu_rev) cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; } else if (cpu_is_ti816x()) { cpu_name = "TI816X"; + } else if (cpu_is_am335x()) { + cpu_name = "AM335X"; + } else if (cpu_is_ti814x()) { + cpu_name = "TI814X"; } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ cpu_name = "OMAP3430/3530"; @@ -472,11 +510,11 @@ void __init omap2_check_revision(void) } else if (cpu_is_omap34xx()) { omap3_check_revision(&cpu_rev); - /* TI816X doesn't have feature register */ - if (!cpu_is_ti816x()) + /* TI81XX doesn't have feature register */ + if (!cpu_is_ti81xx()) omap3_check_features(); else - ti816x_check_features(); + ti81xx_check_features(); omap3_cpuinfo(cpu_rev); return; diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 13f98e5..cdfc2a1 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -66,11 +66,11 @@ omap_uart_lsr: .word 0 beq 34f @ configure OMAP3UART4 cmp \rp, #OMAP4UART4 @ only on 44xx beq 44f @ configure OMAP4UART4 - cmp \rp, #TI816XUART1 @ ti816x UART offsets different + cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different beq 81f @ configure UART1 - cmp \rp, #TI816XUART2 @ ti816x UART offsets different + cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different beq 82f @ configure UART2 - cmp \rp, #TI816XUART3 @ ti816x UART offsets different + cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different beq 83f @ configure UART3 cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART @@ -94,11 +94,11 @@ omap_uart_lsr: .word 0 b 98f 44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -81: mov \rp, #UART_OFFSET(TI816X_UART1_BASE) +81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE) b 98f -82: mov \rp, #UART_OFFSET(TI816X_UART2_BASE) +82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE) b 98f -83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) +83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) b 98f 95: ldr \rp, =ZOOM_UART_BASE diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3f565dd..73d617f 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -176,14 +176,31 @@ static struct map_desc omap34xx_io_desc[] __initdata = { }; #endif -#ifdef CONFIG_SOC_OMAPTI816X -static struct map_desc omapti816x_io_desc[] __initdata = { +#ifdef CONFIG_SOC_OMAPTI81XX +static struct map_desc omapti81xx_io_desc[] __initdata = { + { + .virtual = L4_34XX_VIRT, + .pfn = __phys_to_pfn(L4_34XX_PHYS), + .length = L4_34XX_SIZE, + .type = MT_DEVICE + } +}; +#endif + +#ifdef CONFIG_SOC_OMAPAM33XX +static struct map_desc omapam33xx_io_desc[] __initdata = { { .virtual = L4_34XX_VIRT, .pfn = __phys_to_pfn(L4_34XX_PHYS), .length = L4_34XX_SIZE, .type = MT_DEVICE }, + { + .virtual = L4_WK_AM33XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_AM33XX_PHYS), + .length = L4_WK_AM33XX_SIZE, + .type = MT_DEVICE + } }; #endif @@ -263,10 +280,17 @@ void __init omap34xx_map_common_io(void) } #endif -#ifdef CONFIG_SOC_OMAPTI816X -void __init omapti816x_map_common_io(void) +#ifdef CONFIG_SOC_OMAPTI81XX +void __init omapti81xx_map_common_io(void) +{ + iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc)); +} +#endif + +#ifdef CONFIG_SOC_OMAPAM33XX +void __init omapam33xx_map_common_io(void) { - iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc)); + iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); } #endif @@ -418,9 +442,9 @@ void __init am35xx_init_early(void) omap3_init_early(); } -void __init ti816x_init_early(void) +void __init ti81xx_init_early(void) { - omap2_set_globals_ti816x(); + omap2_set_globals_ti81xx(); omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 42b1d65..1fef061 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -193,7 +193,7 @@ void __init omap3_init_irq(void) omap_init_irq(OMAP34XX_IC_BASE, 96); } -void __init ti816x_init_irq(void) +void __init ti81xx_init_irq(void) { omap_init_irq(OMAP34XX_IC_BASE, 128); } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 292eee3..28fcb27 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 58775e3..4c90477 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -260,3 +260,38 @@ void am35x_set_mode(u8 musb_mode) omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); } + +void ti81xx_musb_phy_power(u8 on) +{ + void __iomem *scm_base = NULL; + u32 usbphycfg; + + scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K); + if (!scm_base) { + pr_err("system control module ioremap failed\n"); + return; + } + + usbphycfg = __raw_readl(scm_base + USBCTRL0); + + if (on) { + if (cpu_is_ti816x()) { + usbphycfg |= TI816X_USBPHY0_NORMAL_MODE; + usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC; + } else if (cpu_is_ti814x()) { + usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN + | USBPHY_DPINPUT | USBPHY_DMINPUT); + usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN + | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL); + } + } else { + if (cpu_is_ti816x()) + usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE; + else if (cpu_is_ti814x()) + usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; + + } + __raw_writel(usbphycfg, scm_base + USBCTRL0); + + iounmap(scm_base); +} diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h index 8affc66..8fae534 100644 --- a/arch/arm/mach-omap2/opp2xxx.h +++ b/arch/arm/mach-omap2/opp2xxx.h @@ -51,7 +51,7 @@ struct prcm_config { unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ unsigned long base_sdrc_rfr; /* base refresh timing for a set */ - unsigned char flags; + unsigned short flags; }; diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index ee3a8ad..7479d7e 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -1,7 +1,7 @@ /* * SDRC register values for Nokia boards * - * Copyright (C) 2008, 2010 Nokia Corporation + * Copyright (C) 2008, 2010-2011 Nokia Corporation * * Lauri Leukkunen <lauri.leukkunen@nokia.com> * @@ -107,14 +107,37 @@ static const struct sdram_timings nokia_195dot2mhz_timings[] = { }, }; +static const struct sdram_timings nokia_200mhz_timings[] = { + { + .casl = 3, + .tDAL = 30000, + .tDPL = 15000, + .tRRD = 10000, + .tRCD = 20000, + .tRP = 15000, + .tRAS = 40000, + .tRC = 55000, + .tRFC = 140000, + .tXSR = 200000, + + .tREF = 7800, + + .tXP = 2, + .tCKE = 4, + .tWTR = 2 + }, +}; + static const struct { long rate; struct sdram_timings const *data; } nokia_timings[] = { { 83000000, nokia_166mhz_timings }, { 97600000, nokia_97dot6mhz_timings }, + { 100000000, nokia_200mhz_timings }, { 166000000, nokia_166mhz_timings }, { 195200000, nokia_195dot2mhz_timings }, + { 200000000, nokia_200mhz_timings }, }; static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1]; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 42c3267..d0f009c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -464,7 +464,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) mod_timer(&uart->timer, jiffies + uart->timeout); omap_uart_smart_idle_enable(uart, 0); - if (cpu_is_omap34xx() && !cpu_is_ti816x()) { + if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx())) { u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD; u32 wk_mask = 0; u32 padconf = 0; @@ -746,7 +746,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) */ uart->regshift = p->regshift; uart->membase = p->membase; - if (cpu_is_omap44xx() || cpu_is_ti816x()) + if (cpu_is_omap44xx() || cpu_is_ti81xx()) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF) >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) @@ -828,7 +828,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) } /* Enable the MDR1 errata for OMAP3 */ - if (cpu_is_omap34xx() && !cpu_is_ti816x()) + if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx())) uart->errata |= UART_ERRATA_i202_MDR1_ACCESS; } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 2679750..8d5ed77 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -93,6 +93,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; + } else if (cpu_is_ti81xx()) { + oh_name = "usb_otg_hs"; + name = "musb-ti81xx"; } else { oh_name = "usb_otg_hs"; name = "musb-omap2430"; diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index cb53160..26ebb57 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/slab.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index ef555c0..a12b689 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <asm/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <linux/of.h> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 4f47a76..f2d7521 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -53,6 +53,7 @@ #include <mach/pxa27x-udc.h> #include <mach/camera.h> #include <mach/audio.h> +#include <mach/smemc.h> #include <media/soc_camera.h> #include <mach/mioa701.h> @@ -390,24 +391,19 @@ static struct pxamci_platform_data mioa701_mci_info = { }; /* FlashRAM */ -static struct resource strataflash_resource = { +static struct resource docg3_resource = { .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_64M - 1, + .end = PXA_CS0_PHYS + SZ_8K - 1, .flags = IORESOURCE_MEM, }; -static struct physmap_flash_data strataflash_data = { - .width = 2, - /* .set_vpp = mioa701_set_vpp, */ -}; - -static struct platform_device strataflash = { - .name = "physmap-flash", +static struct platform_device docg3 = { + .name = "docg3", .id = -1, - .resource = &strataflash_resource, + .resource = &docg3_resource, .num_resources = 1, .dev = { - .platform_data = &strataflash_data, + .platform_data = NULL, }, }; @@ -685,7 +681,7 @@ static struct platform_device *devices[] __initdata = { &pxa2xx_pcm, &mioa701_sound, &power_dev, - &strataflash, + &docg3, &gpio_vbus, &mioa701_camera, &mioa701_board, @@ -720,6 +716,15 @@ static void __init mioa701_machine_init(void) RTTR = 32768 - 1; /* Reset crazy WinCE value */ UP2OCR = UP2OCR_HXOE; + /* + * Set up the flash memory : DiskOnChip G3 on first static memory bank + */ + __raw_writel(0x7ff02dd8, MSC0); + __raw_writel(0x0001c391, MCMEM0); + __raw_writel(0x0001c391, MCATT0); + __raw_writel(0x0001c391, MCIO0); + + pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 91fe0b4..937eb78 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -167,6 +167,24 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { .lcdcon5 = (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_HWSWP), }, + /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/ + [3] = { + _LCD_DECLARE( + /* clock */ + 7, + /* xres, margin_right, margin_left, hsync */ + 320, 68, 66, 4, + /* yres, margin_top, margin_bottom, vsync */ + 240, 4, 4, 9, + /* refresh rate */ + 60), + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVDEN | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_HWSWP), + }, }; /* todo - put into gpio header */ diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 5552e04..4d8c489 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -188,7 +188,7 @@ config SMDK6410_WM1190_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM8350 - select S3C24XX_GPIO_EXTRA64 + select SAMSUNG_GPIO_EXTRA64 select MFD_WM8350_I2C select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8350_CONFIG_MODE_3 @@ -206,7 +206,7 @@ config SMDK6410_WM1192_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM831X - select S3C24XX_GPIO_EXTRA64 + select SAMSUNG_GPIO_EXTRA64 select MFD_WM831X select MFD_WM831X_I2C help @@ -287,7 +287,7 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_WDT select S3C_DEV_RTC select S3C64XX_DEV_SPI - select S3C24XX_GPIO_EXTRA128 + select SAMSUNG_GPIO_EXTRA128 select I2C help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 5e6b420..3341fd1 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/string.h> +#include <linux/export.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index be9074e..5d55ab0 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -15,9 +15,11 @@ #define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START #define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) +#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128) #define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) +#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64) #endif diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h index 6e34c2f..8b540c4 100644 --- a/arch/arm/mach-s3c64xx/include/mach/gpio.h +++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h @@ -88,6 +88,6 @@ enum s3c_gpio_number { /* define the number of gpios we need to the one after the GPQ() range */ #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) -#define BOARD_NR_GPIOS 16 +#define BOARD_NR_GPIOS (16 + CONFIG_SAMSUNG_GPIO_EXTRA) #define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 443f85b..96d60e0 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -169,7 +169,7 @@ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) #ifdef CONFIG_MACH_WLF_CRAGG_6410 -#define IRQ_BOARD_NR 128 +#define IRQ_BOARD_NR 160 #elif defined(CONFIG_SMDK6410_WM1190_EV1) #define IRQ_BOARD_NR 64 #elif defined(CONFIG_SMDK6410_WM1192_EV1) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index f208154..cd3c97e 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -14,13 +14,43 @@ #include <linux/mfd/wm831x/irq.h> #include <linux/mfd/wm831x/gpio.h> +#include <linux/mfd/wm8994/pdata.h> +#include <sound/wm5100.h> #include <sound/wm8996.h> #include <sound/wm8962.h> #include <sound/wm9081.h> #include <mach/crag6410.h> +static struct wm5100_pdata wm5100_pdata = { + .ldo_ena = S3C64XX_GPN(7), + .irq_flags = IRQF_TRIGGER_HIGH, + .gpio_base = CODEC_GPIO_BASE, + + .in_mode = { + WM5100_IN_DIFF, + WM5100_IN_DIFF, + WM5100_IN_DIFF, + WM5100_IN_SE, + }, + + .hp_pol = CODEC_GPIO_BASE + 3, + .jack_modes = { + { WM5100_MICDET_MICBIAS3, 0, 0 }, + { WM5100_MICDET_MICBIAS2, 1, 1 }, + }, + + .gpio_defaults = { + 0, + 0, + 0, + 0, + 0x2, /* IRQ: CMOS output */ + 0x3, /* CLKOUT: CMOS output */ + }, +}; + static struct wm8996_retune_mobile_config wm8996_retune[] = { { .name = "Sub LPF", @@ -72,7 +102,6 @@ static struct wm8962_pdata wm8962_pdata __initdata = { 0x8000 | WM8962_GPIO_FN_DMICDAT, WM8962_GPIO_FN_IRQ, /* Open drain mode */ }, - .irq_active_low = true, }; static struct wm9081_pdata wm9081_pdata __initdata = { @@ -91,6 +120,7 @@ static const struct i2c_board_info wm1254_devs[] = { static const struct i2c_board_info wm1255_devs[] = { { I2C_BOARD_INFO("wm5100", 0x1a), + .platform_data = &wm5100_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, }, { I2C_BOARD_INFO("wm9081", 0x6c), @@ -104,6 +134,24 @@ static const struct i2c_board_info wm1259_devs[] = { }, }; +static struct wm8994_pdata wm8994_pdata = { + .gpio_base = CODEC_GPIO_BASE, + .gpio_defaults = { + 0x3, /* IRQ out, active high, CMOS */ + }, + .irq_base = CODEC_IRQ_BASE, + .ldo = { + { .supply = "WALLVDD" }, + { .supply = "WALLVDD" }, + }, +}; + +static const struct i2c_board_info wm1277_devs[] = { + { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */ + .platform_data = &wm8994_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; static __devinitdata const struct { u8 id; @@ -125,6 +173,8 @@ static __devinitdata const struct { { .id = 0x3b, .name = "1255-EV1 Kilchoman", .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, { .id = 0x3c, .name = "1273-EV1 Longmorn" }, + { .id = 0x3d, .name = "1277-EV1 Littlemill", + .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, }; static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, @@ -154,8 +204,8 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, "Failed to register dev: %d\n", ret); } } else { - dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n", - id, rev); + dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", + id, rev + 1); } return 0; diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 988ac2e..799558c 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -37,6 +37,8 @@ #include <linux/mfd/wm831x/irq.h> #include <linux/mfd/wm831x/gpio.h> +#include <sound/wm1250-ev1.h> + #include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -288,6 +290,11 @@ static struct platform_device speyside_wm8962_device = { .id = -1, }; +static struct platform_device littlemill_device = { + .name = "littlemill", + .id = -1, +}; + static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), @@ -340,6 +347,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &crag6410_backlight_device, &speyside_device, &speyside_wm8962_device, + &littlemill_device, &lowland_device, &wallvdd_device, }; @@ -373,6 +381,10 @@ static struct regulator_init_data vddarm __initdata = { .driver_data = &vddarm_pdata, }; +static struct regulator_consumer_supply vddint_consumers[] __initdata = { + REGULATOR_SUPPLY("vddint", NULL), +}; + static struct regulator_init_data vddint __initdata = { .constraints = { .name = "VDDINT", @@ -381,6 +393,9 @@ static struct regulator_init_data vddint __initdata = { .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, }, + .num_consumer_supplies = ARRAY_SIZE(vddint_consumers), + .consumer_supplies = vddint_consumers, + .supply_regulator = "WALLVDD", }; static struct regulator_init_data vddmem __initdata = { @@ -501,7 +516,8 @@ static struct wm831x_touch_pdata touch_pdata __initdata = { static struct wm831x_pdata crag_pmic_pdata __initdata = { .wm831x_num = 1, .irq_base = BANFF_PMIC_IRQ_BASE, - .gpio_base = GPIO_BOARD_START + 8, + .gpio_base = BANFF_PMIC_GPIO_BASE, + .soft_shutdown = true, .backup = &banff_backup_pdata, @@ -606,6 +622,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .wm831x_num = 2, .irq_base = GLENFARCLAS_PMIC_IRQ_BASE, .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE, + .soft_shutdown = true, .gpio_defaults = { /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */ @@ -623,6 +640,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; +static struct wm1250_ev1_pdata wm1250_ev1_pdata = { + .gpios = { + [WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12), + [WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12), + [WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13), + [WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14), + [WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8), + }, +}; + static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), @@ -632,7 +659,13 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, { I2C_BOARD_INFO("wlf-gf-module", 0x26) }, - { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, + { I2C_BOARD_INFO("wm1250-ev1", 0x27), + .platform_data = &wm1250_ev1_pdata }, +}; + +static struct s3c2410_platform_i2c i2c1_pdata = { + .frequency = 400000, + .bus_num = 1, }; static void __init crag6410_map_io(void) @@ -693,7 +726,7 @@ static void __init crag6410_machine_init(void) s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata); s3c_i2c0_set_platdata(&i2c0_pdata); - s3c_i2c1_set_platdata(NULL); + s3c_i2c1_set_platdata(&i2c1_pdata); s3c_fb_set_platdata(&crag6410_lcd_pdata); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index b375cd5..0868d13 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -89,6 +89,8 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C64XX_SDMA_SEL), SAVE_ITEM(S3C64XX_MODEM_MIFPCON), + + SAVE_ITEM(S3C64XX_NORMAL_CFG), }; void s3c_pm_configure_extint(void) @@ -181,10 +183,23 @@ static void s3c64xx_pm_prepare(void) static int s3c64xx_pm_init(void) { + u32 val; + pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; + /* + * Unconditionally disable power domains that contain only + * blocks which have no mainline driver support. + */ + val = __raw_readl(S3C64XX_NORMAL_CFG); + val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON | + S3C64XX_NORMALCFG_DOMAIN_V_ON | + S3C64XX_NORMALCFG_DOMAIN_I_ON | + S3C64XX_NORMALCFG_DOMAIN_P_ON); + __raw_writel(val, S3C64XX_NORMAL_CFG); + #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 7a3bc32..51c00f2 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -70,7 +70,7 @@ void __init s3c6400_init_irq(void) s3c64xx_init_irq(~0 & ~(0xf << 5), ~0); } -struct sysdev_class s3c6400_sysclass = { +static struct sysdev_class s3c6400_sysclass = { .name = "s3c6400-core", }; diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 83d2afb..2cf8002 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -20,7 +20,7 @@ #include <plat/fb.h> #include <plat/gpio-cfg.h> -extern void s3c64xx_fb_gpio_setup_24bpp(void) +void s3c64xx_fb_gpio_setup_24bpp(void) { s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2)); s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 4ca77c4..3ac9e57 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -274,6 +274,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { static struct platform_pwm_backlight_data smdkv210_bl_data = { .pwm_id = 3, + .pwm_period_ns = 1000, }; static void __init smdkv210_map_io(void) diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index 5a616f6..f7951aa 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,5 +1,5 @@ -ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) += 0xc0208000 +ifeq ($(CONFIG_SA1111),y) + zreladdr-y += 0xc0208000 else zreladdr-y += 0xc0008000 endif diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index d9bf7c1..e120ff5 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,3 +1,4 @@ +obj-y += board-pinmux.o obj-y += common.o obj-y += devices.o obj-y += io.o diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index ddaa037..70f0602 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -54,6 +54,8 @@ void trimslice_pinmux_init(void); void ventana_pinmux_init(void); struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("nvidia,tegra20-pinmux", TEGRA_APB_MISC_BASE + 0x14, "tegra-pinmux", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-gpio", TEGRA_GPIO_BASE, "tegra-gpio", NULL), OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL), OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL), OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL), @@ -110,13 +112,6 @@ static void __init tegra_dt_init(void) tegra_clk_init_from_table(tegra_dt_clk_init_table); - /* - * Finished with the static registrations now; fill in the missing - * devices - */ - of_platform_populate(NULL, tegra_dt_match_table, - tegra20_auxdata_lookup, NULL); - for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) { if (of_machine_is_compatible(pinmux_configs[i].machine)) { pinmux_configs[i].init(); @@ -126,6 +121,13 @@ static void __init tegra_dt_init(void) WARN(i == ARRAY_SIZE(pinmux_configs), "Unknown platform! Pinmuxing not initialized\n"); + + /* + * Finished with the static registrations now; fill in the missing + * devices + */ + of_platform_populate(NULL, tegra_dt_match_table, + tegra20_auxdata_lookup, NULL); } static const char *tegra20_dt_board_compat[] = { diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index bd402d0..33c4fed 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -22,8 +22,6 @@ #include <asm/mach-types.h> -#include <mach/pinmux.h> -#include <mach/pinmux-tegra20.h> #include "board.h" #include "board-harmony.h" @@ -49,10 +47,6 @@ static int __init harmony_pcie_init(void) regulator_enable(regulator); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_NORMAL); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_NORMAL); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_NORMAL); - err = tegra_pcie_init(true, true); if (err) goto err_pcie; @@ -60,10 +54,6 @@ static int __init harmony_pcie_init(void) return 0; err_pcie: - tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_TRISTATE); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_TRISTATE); - tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_TRISTATE); - regulator_disable(regulator); regulator_put(regulator); err_reg: diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c index b8a2485..465808c 100644 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ b/arch/arm/mach-tegra/board-harmony-pinmux.c @@ -23,7 +23,7 @@ #include "gpio-names.h" #include "board-harmony.h" -#include "devices.h" +#include "board-pinmux.h" static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -144,11 +144,6 @@ static struct tegra_pingroup_config harmony_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; -static struct platform_device *pinmux_devices[] = { - &tegra_gpio_device, - &tegra_pinmux_device, -}; - static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, @@ -162,13 +157,14 @@ static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_EXT_MIC_EN, .enable = true }, }; +static struct tegra_board_pinmux_conf conf = { + .pgs = harmony_pinmux, + .pg_count = ARRAY_SIZE(harmony_pinmux), + .gpios = gpio_table, + .gpio_count = ARRAY_SIZE(gpio_table), +}; + void harmony_pinmux_init(void) { - if (!of_machine_is_compatible("nvidia,tegra20")) - platform_add_devices(pinmux_devices, - ARRAY_SIZE(pinmux_devices)); - - tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux)); - - tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); + tegra_board_pinmux_init(&conf, NULL); } diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c index bc1fe58..c775572 100644 --- a/arch/arm/mach-tegra/board-paz00-pinmux.c +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c @@ -23,7 +23,7 @@ #include "gpio-names.h" #include "board-paz00.h" -#include "devices.h" +#include "board-pinmux.h" static struct tegra_pingroup_config paz00_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -31,7 +31,7 @@ static struct tegra_pingroup_config paz00_pinmux[] = { {TEGRA_PINGROUP_ATC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CSUS, TEGRA_MUX_PLLC_OUT1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, @@ -144,11 +144,6 @@ static struct tegra_pingroup_config paz00_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; -static struct platform_device *pinmux_devices[] = { - &tegra_gpio_device, - &tegra_pinmux_device, -}; - static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_GPIO_SD1_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, @@ -159,13 +154,14 @@ static struct tegra_gpio_table gpio_table[] = { { .gpio = TEGRA_WIFI_LED, .enable = true }, }; +static struct tegra_board_pinmux_conf conf = { + .pgs = paz00_pinmux, + .pg_count = ARRAY_SIZE(paz00_pinmux), + .gpios = gpio_table, + .gpio_count = ARRAY_SIZE(gpio_table), +}; + void paz00_pinmux_init(void) { - if (!of_machine_is_compatible("nvidia,tegra20")) - platform_add_devices(pinmux_devices, - ARRAY_SIZE(pinmux_devices)); - - tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux)); - - tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); + tegra_board_pinmux_init(&conf, NULL); } diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index e68b407..8a52459 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -23,8 +23,10 @@ #include <linux/serial_8250.h> #include <linux/clk.h> #include <linux/dma-mapping.h> +#include <linux/gpio_keys.h> #include <linux/pda_power.h> #include <linux/io.h> +#include <linux/input.h> #include <linux/i2c.h> #include <linux/gpio.h> #include <linux/rfkill-gpio.h> @@ -115,12 +117,37 @@ static struct platform_device leds_gpio = { }, }; +static struct gpio_keys_button paz00_gpio_keys_buttons[] = { + { + .code = KEY_POWER, + .gpio = TEGRA_GPIO_POWERKEY, + .active_low = 1, + .desc = "Power", + .type = EV_KEY, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data paz00_gpio_keys = { + .buttons = paz00_gpio_keys_buttons, + .nbuttons = ARRAY_SIZE(paz00_gpio_keys_buttons), +}; + +static struct platform_device gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &paz00_gpio_keys, + }, +}; + static struct platform_device *paz00_devices[] __initdata = { &debug_uart, &tegra_sdhci_device4, &tegra_sdhci_device1, &wifi_rfkill_device, &leds_gpio, + &gpio_keys_device, }; static void paz00_i2c_init(void) diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index 8aff06e..ffa83f5 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -32,6 +32,9 @@ #define TEGRA_WIFI_RST TEGRA_GPIO_PD1 #define TEGRA_WIFI_LED TEGRA_GPIO_PD0 +/* WakeUp */ +#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PJ7 + void paz00_pinmux_init(void); #endif diff --git a/arch/arm/mach-tegra/board-pinmux.c b/arch/arm/mach-tegra/board-pinmux.c new file mode 100644 index 0000000..adc3efe --- /dev/null +++ b/arch/arm/mach-tegra/board-pinmux.c @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/string.h> + +#include <mach/gpio-tegra.h> +#include <mach/pinmux.h> + +#include "board-pinmux.h" +#include "devices.h" + +struct tegra_board_pinmux_conf *confs[2]; + +static void tegra_board_pinmux_setup_gpios(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(confs); i++) { + if (!confs[i]) + continue; + + tegra_gpio_config(confs[i]->gpios, confs[i]->gpio_count); + } +} + +static void tegra_board_pinmux_setup_pinmux(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(confs); i++) { + if (!confs[i]) + continue; + + tegra_pinmux_config_table(confs[i]->pgs, confs[i]->pg_count); + + if (confs[i]->drives) + tegra_drive_pinmux_config_table(confs[i]->drives, + confs[i]->drive_count); + } +} + +static int tegra_board_pinmux_bus_notify(struct notifier_block *nb, + unsigned long event, void *vdev) +{ + static bool had_gpio; + static bool had_pinmux; + + struct device *dev = vdev; + const char *devname; + + if (event != BUS_NOTIFY_BOUND_DRIVER) + return NOTIFY_DONE; + + devname = dev_name(dev); + + if (!had_gpio && !strcmp(devname, GPIO_DEV)) { + tegra_board_pinmux_setup_gpios(); + had_gpio = true; + } else if (!had_pinmux && !strcmp(devname, PINMUX_DEV)) { + tegra_board_pinmux_setup_pinmux(); + had_pinmux = true; + } + + if (had_gpio && had_pinmux) + return NOTIFY_STOP_MASK; + else + return NOTIFY_DONE; +} + +static struct notifier_block nb = { + .notifier_call = tegra_board_pinmux_bus_notify, +}; + +static struct platform_device *devices[] = { + &tegra_gpio_device, + &tegra_pinmux_device, +}; + +void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a, + struct tegra_board_pinmux_conf *conf_b) +{ + confs[0] = conf_a; + confs[1] = conf_b; + + bus_register_notifier(&platform_bus_type, &nb); + + if (!of_machine_is_compatible("nvidia,tegra20")) + platform_add_devices(devices, ARRAY_SIZE(devices)); +} diff --git a/arch/arm/mach-tegra/board-pinmux.h b/arch/arm/mach-tegra/board-pinmux.h new file mode 100644 index 0000000..4aac735 --- /dev/null +++ b/arch/arm/mach-tegra/board-pinmux.h @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_BOARD_PINMUX_H +#define __MACH_TEGRA_BOARD_PINMUX_H + +#define GPIO_DEV "tegra-gpio" +#define PINMUX_DEV "tegra-pinmux" + +struct tegra_pingroup_config; +struct tegra_gpio_table; + +struct tegra_board_pinmux_conf { + struct tegra_pingroup_config *pgs; + int pg_count; + + struct tegra_drive_pingroup_config *drives; + int drive_count; + + struct tegra_gpio_table *gpios; + int gpio_count; +}; + +void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a, + struct tegra_board_pinmux_conf *conf_b); + +#endif diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c index f6b9c01..55e7e43 100644 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -22,8 +22,8 @@ #include <mach/pinmux-tegra20.h> #include "gpio-names.h" +#include "board-pinmux.h" #include "board-seaboard.h" -#include "devices.h" #define DEFAULT_DRIVE(_name) \ { \ @@ -37,11 +37,11 @@ .slew_falling = TEGRA_SLEW_SLOWEST, \ } -static __initdata struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = { +static struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = { DEFAULT_DRIVE(SDIO1), }; -static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { +static struct tegra_pingroup_config common_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -55,7 +55,6 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, @@ -65,7 +64,6 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_GMA, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GMB, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_GMC, TEGRA_MUX_UARTD, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GME, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GPU, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GPU7, TEGRA_MUX_RTCK, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -108,13 +106,8 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_LM0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LM1, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_LPP, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_LPW0, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LPW1, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_LPW2, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LSC0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_LSC1, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_LSCK, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_LSDA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_LSDI, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_LSPI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LVP0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -122,25 +115,19 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_PTA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDB, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDC, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDD, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SLXD, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPDI, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, @@ -160,13 +147,24 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; -static __initdata struct tegra_pingroup_config ventana_pinmux[] = { - {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, +static struct tegra_pingroup_config seaboard_pinmux[] = { + {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW0, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LPW2, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_LSC1, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSCK, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_LSDA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PTA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, +}; + +static struct tegra_pingroup_config ventana_pinmux[] = { {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DTD, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, @@ -181,65 +179,59 @@ static __initdata struct tegra_pingroup_config ventana_pinmux[] = { {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, }; -static struct platform_device *pinmux_devices[] = { - &tegra_gpio_device, - &tegra_pinmux_device, -}; - static struct tegra_gpio_table common_gpio_table[] = { { .gpio = TEGRA_GPIO_SD2_CD, .enable = true }, { .gpio = TEGRA_GPIO_SD2_WP, .enable = true }, { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true }, + { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, +}; + +static struct tegra_gpio_table seaboard_gpio_table[] = { { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, { .gpio = TEGRA_GPIO_HP_DET, .enable = true }, { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true }, - { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, { .gpio = TEGRA_GPIO_USB1, .enable = true }, }; -static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size) -{ - int i, j; - struct tegra_pingroup_config *new_pingroup, *base_pingroup; - - /* Update base seaboard pinmux table with secondary board - * specific pinmux table table. - */ - for (i = 0; i < size; i++) { - new_pingroup = &newtbl[i]; - for (j = 0; j < ARRAY_SIZE(seaboard_pinmux); j++) { - base_pingroup = &seaboard_pinmux[j]; - if (new_pingroup->pingroup == base_pingroup->pingroup) { - *base_pingroup = *new_pingroup; - break; - } - } - } -} - -void __init seaboard_common_pinmux_init(void) -{ - if (!of_machine_is_compatible("nvidia,tegra20")) - platform_add_devices(pinmux_devices, - ARRAY_SIZE(pinmux_devices)); +static struct tegra_gpio_table ventana_gpio_table[] = { + /* hp_det */ + { .gpio = TEGRA_GPIO_PW2, .enable = true }, + /* int_mic_en */ + { .gpio = TEGRA_GPIO_PX0, .enable = true }, + /* ext_mic_en */ + { .gpio = TEGRA_GPIO_PX1, .enable = true }, +}; - tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux)); +static struct tegra_board_pinmux_conf common_conf = { + .pgs = common_pinmux, + .pg_count = ARRAY_SIZE(common_pinmux), + .gpios = common_gpio_table, + .gpio_count = ARRAY_SIZE(common_gpio_table), +}; - tegra_drive_pinmux_config_table(seaboard_drive_pinmux, - ARRAY_SIZE(seaboard_drive_pinmux)); +static struct tegra_board_pinmux_conf seaboard_conf = { + .pgs = seaboard_pinmux, + .pg_count = ARRAY_SIZE(seaboard_pinmux), + .drives = seaboard_drive_pinmux, + .drive_count = ARRAY_SIZE(seaboard_drive_pinmux), + .gpios = seaboard_gpio_table, + .gpio_count = ARRAY_SIZE(seaboard_gpio_table), +}; - tegra_gpio_config(common_gpio_table, ARRAY_SIZE(common_gpio_table)); -} +static struct tegra_board_pinmux_conf ventana_conf = { + .pgs = ventana_pinmux, + .pg_count = ARRAY_SIZE(ventana_pinmux), + .gpios = ventana_gpio_table, + .gpio_count = ARRAY_SIZE(ventana_gpio_table), +}; -void __init seaboard_pinmux_init(void) +void seaboard_pinmux_init(void) { - seaboard_common_pinmux_init(); + tegra_board_pinmux_init(&common_conf, &seaboard_conf); } -void __init ventana_pinmux_init(void) +void ventana_pinmux_init(void) { - update_pinmux(ventana_pinmux, ARRAY_SIZE(ventana_pinmux)); - seaboard_common_pinmux_init(); + tegra_board_pinmux_init(&common_conf, &ventana_conf); } - diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index 7331e15..a21a2be 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -22,10 +22,10 @@ #include <mach/pinmux-tegra20.h> #include "gpio-names.h" +#include "board-pinmux.h" #include "board-trimslice.h" -#include "devices.h" -static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { +static struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -106,7 +106,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_PTA, TEGRA_MUX_RSVD3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_PTA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDB, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SDC, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, @@ -144,11 +144,6 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, }; -static struct platform_device *pinmux_devices[] = { - &tegra_gpio_device, - &tegra_pinmux_device, -}; - static struct tegra_gpio_table gpio_table[] = { { .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */ { .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */ @@ -157,11 +152,14 @@ static struct tegra_gpio_table gpio_table[] = { { .gpio = TRIMSLICE_GPIO_USB2_RST, .enable = true }, /* USB2 PHY rst */ }; -void __init trimslice_pinmux_init(void) +static struct tegra_board_pinmux_conf conf = { + .pgs = trimslice_pinmux, + .pg_count = ARRAY_SIZE(trimslice_pinmux), + .gpios = gpio_table, + .gpio_count = ARRAY_SIZE(gpio_table), +}; + +void trimslice_pinmux_init(void) { - if (!of_machine_is_compatible("nvidia,tegra20")) - platform_add_devices(pinmux_devices, - ARRAY_SIZE(pinmux_devices)); - tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux)); - tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); + tegra_board_pinmux_init(&conf, NULL); } diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index 97ef3e5..ec63c6b 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -37,7 +37,6 @@ #include <asm/sizes.h> #include <asm/mach/pci.h> -#include <mach/pinmux.h> #include <mach/iomap.h> #include <mach/clk.h> #include <mach/powergate.h> diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 74aac96..adbff70 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -17,6 +17,7 @@ * the CPU clock speed on the fly. */ +#include <linux/module.h> #include <linux/cpufreq.h> #include <linux/clk.h> #include <linux/err.h> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index bf64e1e..f0726d4 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -265,16 +265,20 @@ #define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL) #define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D2__CSPI3_MOSI IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D3__CSPI3_MISO IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL) #define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL) #define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D4__CSPI3_SCLK IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL) +#define MX25_PAD_CSI_D5__CSPI3_RDY IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 42d74ea..845de59 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -32,6 +32,9 @@ #define MX3_PWMSAR 0x0C /* PWM Sample Register */ #define MX3_PWMPR 0x10 /* PWM Period Register */ #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) #define MX3_PWMCR_CLKSRC_IPG (1 << 16) #define MX3_PWMCR_EN (1 << 0) @@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN; + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_EN; if (cpu_is_mx25()) cr |= MX3_PWMCR_CLKSRC_IPG; diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 3df04d9..9a58461 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_device.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o -obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/plat-omap/include/plat/am33xx.h new file mode 100644 index 0000000..06c19bb --- /dev/null +++ b/arch/arm/plat-omap/include/plat/am33xx.h @@ -0,0 +1,25 @@ +/* + * This file contains the address info for various AM33XX modules. + * + * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_AM33XX_H +#define __ASM_ARCH_AM33XX_H + +#define L4_SLOW_AM33XX_BASE 0x48000000 + +#define AM33XX_SCM_BASE 0x44E10000 +#define AM33XX_CTRL_BASE AM33XX_SCM_BASE +#define AM33XX_PRCM_BASE 0x44E00000 + +#endif /* __ASM_ARCH_AM33XX_H */ diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index eb73ab4..240a7b9 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -59,6 +59,8 @@ struct clkops { #define RATE_IN_4430 (1 << 5) #define RATE_IN_TI816X (1 << 6) #define RATE_IN_4460 (1 << 7) +#define RATE_IN_AM33XX (1 << 8) +#define RATE_IN_TI814X (1 << 9) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) @@ -84,7 +86,7 @@ struct clkops { struct clksel_rate { u32 val; u8 div; - u8 flags; + u16 flags; }; /** diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 408a12f..6b51086 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -69,6 +69,7 @@ unsigned int omap_rev(void); * cpu_is_omap343x(): True for OMAP3430 * cpu_is_omap443x(): True for OMAP4430 * cpu_is_omap446x(): True for OMAP4460 + * cpu_is_omap447x(): True for OMAP4470 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -78,6 +79,22 @@ static inline int is_omap ##class (void) \ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ } +#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_AM_CLASS(class, id) \ +static inline int is_am ##class (void) \ +{ \ + return (GET_AM_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_TI_CLASS(class, id) \ +static inline int is_ti ##class (void) \ +{ \ + return (GET_TI_CLASS == (id)) ? 1 : 0; \ +} + #define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) #define IS_OMAP_SUBCLASS(subclass, id) \ @@ -92,12 +109,21 @@ static inline int is_ti ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } +#define IS_AM_SUBCLASS(subclass, id) \ +static inline int is_am ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + IS_OMAP_CLASS(7xx, 0x07) IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_CLASS(44xx, 0x44) +IS_AM_CLASS(33xx, 0x33) + +IS_TI_CLASS(81xx, 0x81) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) @@ -105,8 +131,11 @@ IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) IS_OMAP_SUBCLASS(443x, 0x443) IS_OMAP_SUBCLASS(446x, 0x446) +IS_OMAP_SUBCLASS(447x, 0x447) IS_TI_SUBCLASS(816x, 0x816) +IS_TI_SUBCLASS(814x, 0x814) +IS_AM_SUBCLASS(335x, 0x335) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -116,10 +145,15 @@ IS_TI_SUBCLASS(816x, 0x816) #define cpu_is_omap243x() 0 #define cpu_is_omap34xx() 0 #define cpu_is_omap343x() 0 +#define cpu_is_ti81xx() 0 #define cpu_is_ti816x() 0 +#define cpu_is_ti814x() 0 +#define cpu_is_am33xx() 0 +#define cpu_is_am335x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 #define cpu_is_omap446x() 0 +#define cpu_is_omap447x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -322,7 +356,11 @@ IS_OMAP_TYPE(3517, 0x3517) # undef cpu_is_omap3530 # undef cpu_is_omap3505 # undef cpu_is_omap3517 +# undef cpu_is_ti81xx # undef cpu_is_ti816x +# undef cpu_is_ti814x +# undef cpu_is_am33xx +# undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() # define cpu_is_omap3503() (cpu_is_omap3430() && \ (!omap3_has_iva()) && \ @@ -339,16 +377,22 @@ IS_OMAP_TYPE(3517, 0x3517) !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() +# define cpu_is_ti81xx() is_ti81xx() # define cpu_is_ti816x() is_ti816x() +# define cpu_is_ti814x() is_ti814x() +# define cpu_is_am33xx() is_am33xx() +# define cpu_is_am335x() is_am335x() #endif # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x # undef cpu_is_omap446x +# undef cpu_is_omap447x # define cpu_is_omap44xx() is_omap44xx() # define cpu_is_omap443x() is_omap443x() # define cpu_is_omap446x() is_omap446x() +# define cpu_is_omap447x() is_omap447x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -386,15 +430,27 @@ IS_OMAP_TYPE(3517, 0x3517) #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) +#define TI814X_CLASS 0x81400034 +#define TI8148_REV_ES1_0 TI814X_CLASS +#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) +#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) + +#define AM335X_CLASS 0x33500034 +#define AM335X_REV_ES1_0 AM335X_CLASS + #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) #define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) #define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) #define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) +#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) #define OMAP446X_CLASS 0x44600044 #define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) +#define OMAP447X_CLASS 0x44700044 +#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) + void omap2_check_revision(void); /* diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index e87efe1..e897978 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -286,6 +286,7 @@ #include <plat/omap24xx.h> #include <plat/omap34xx.h> #include <plat/omap44xx.h> -#include <plat/ti816x.h> +#include <plat/ti81xx.h> +#include <plat/am33xx.h> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 1234944..0696bae 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -73,6 +73,9 @@ #define OMAP4_L3_IO_OFFSET 0xb4000000 #define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ +#define AM33XX_L4_WK_IO_OFFSET 0xb5000000 +#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET) + #define OMAP4_L3_PER_IO_OFFSET 0xb1100000 #define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) @@ -154,6 +157,15 @@ #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ /* + * ---------------------------------------------------------------------------- + * AM33XX specific IO mapping + * ---------------------------------------------------------------------------- + */ +#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE +#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET) +#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ + +/* * Need to look at the Size 4M for L4. * VPOM3430 was not working for Int controller */ diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index b9e8588..0d818ac 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -35,6 +35,8 @@ #define L4_EMU_34XX_BASE 0x54000000 #define L3_34XX_BASE 0x68000000 +#define L4_WK_AM33XX_BASE 0x44C00000 + #define OMAP3430_32KSYNCT_BASE 0x48320000 #define OMAP3430_CM_BASE 0x48004800 #define OMAP3430_PRM_BASE 0x48306800 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 1ab9fd6..6975ee3 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -51,10 +51,10 @@ #define OMAP4_UART3_BASE 0x48020000 #define OMAP4_UART4_BASE 0x4806e000 -/* TI816X serial ports */ -#define TI816X_UART1_BASE 0x48020000 -#define TI816X_UART2_BASE 0x48022000 -#define TI816X_UART3_BASE 0x48024000 +/* TI81XX serial ports */ +#define TI81XX_UART1_BASE 0x48020000 +#define TI81XX_UART2_BASE 0x48022000 +#define TI81XX_UART3_BASE 0x48024000 /* AM3505/3517 UART4 */ #define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ @@ -89,9 +89,9 @@ #define OMAP4UART2 OMAP2UART2 #define OMAP4UART3 43 #define OMAP4UART4 44 -#define TI816XUART1 81 -#define TI816XUART2 82 -#define TI816XUART3 83 +#define TI81XXUART1 81 +#define TI81XXUART2 82 +#define TI81XXUART3 83 #define ZOOM_UART 95 /* Only on zoom2/3 */ /* This is only used by 8250.c for omap1510 */ diff --git a/arch/arm/plat-omap/include/plat/ti816x.h b/arch/arm/plat-omap/include/plat/ti81xx.h index 50510f5..8f9843f 100644 --- a/arch/arm/plat-omap/include/plat/ti816x.h +++ b/arch/arm/plat-omap/include/plat/ti81xx.h @@ -1,5 +1,5 @@ /* - * This file contains the address data for various TI816X modules. + * This file contains the address data for various TI81XX modules. * * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ * @@ -13,15 +13,15 @@ * GNU General Public License for more details. */ -#ifndef __ASM_ARCH_TI816X_H -#define __ASM_ARCH_TI816X_H +#ifndef __ASM_ARCH_TI81XX_H +#define __ASM_ARCH_TI81XX_H -#define L4_SLOW_TI816X_BASE 0x48000000 +#define L4_SLOW_TI81XX_BASE 0x48000000 -#define TI816X_SCM_BASE 0x48140000 -#define TI816X_CTRL_BASE TI816X_SCM_BASE -#define TI816X_PRCM_BASE 0x48180000 +#define TI81XX_SCM_BASE 0x48140000 +#define TI81XX_CTRL_BASE TI81XX_SCM_BASE +#define TI81XX_PRCM_BASE 0x48180000 -#define TI816X_ARM_INTC_BASE 0x48200000 +#define TI81XX_ARM_INTC_BASE 0x48200000 -#endif /* __ASM_ARCH_TI816X_H */ +#endif /* __ASM_ARCH_TI81XX_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 2f472e9..6ee9049 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -99,9 +99,9 @@ static inline void flush(void) #define DEBUG_LL_ZOOM(mach) \ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) -#define DEBUG_LL_TI816X(p, mach) \ - _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \ - TI816XUART##p) +#define DEBUG_LL_TI81XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + TI81XXUART##p) static inline void __arch_decomp_setup(unsigned long arch_id) { @@ -177,7 +177,10 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_ZOOM(omap_zoom3); /* TI8168 base boards using UART3 */ - DEBUG_LL_TI816X(3, ti8168evm); + DEBUG_LL_TI81XX(3, ti8168evm); + + /* TI8148 base boards using UART1 */ + DEBUG_LL_TI81XX(1, ti8148evm); } while (0); } diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 17d3c93..c616385 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -114,6 +114,7 @@ extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); +extern void ti81xx_musb_phy_power(u8 on); /* * FIXME correct answer depends on hmc_mode, @@ -273,6 +274,37 @@ static inline void omap2_usbfs_init(struct omap_usb_config *pdata) #define CONF2_OTGPWRDN (1 << 2) #define CONF2_DATPOL (1 << 1) +/* TI81XX specific definitions */ +#define USBCTRL0 0x620 +#define USBSTAT0 0x624 + +/* TI816X PHY controls bits */ +#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) +#define TI816X_USBPHY_REFCLK_OSC (1 << 8) + +/* TI814X PHY controls bits */ +#define USBPHY_CM_PWRDN (1 << 0) +#define USBPHY_OTG_PWRDN (1 << 1) +#define USBPHY_CHGDET_DIS (1 << 2) +#define USBPHY_CHGDET_RSTRT (1 << 3) +#define USBPHY_SRCONDM (1 << 4) +#define USBPHY_SINKONDP (1 << 5) +#define USBPHY_CHGISINK_EN (1 << 6) +#define USBPHY_CHGVSRC_EN (1 << 7) +#define USBPHY_DMPULLUP (1 << 8) +#define USBPHY_DPPULLUP (1 << 9) +#define USBPHY_CDET_EXTCTL (1 << 10) +#define USBPHY_GPIO_MODE (1 << 12) +#define USBPHY_DPOPBUFCTL (1 << 13) +#define USBPHY_DMOPBUFCTL (1 << 14) +#define USBPHY_DPINPUT (1 << 15) +#define USBPHY_DMINPUT (1 << 16) +#define USBPHY_DPGPIO_PD (1 << 17) +#define USBPHY_DMGPIO_PD (1 << 18) +#define USBPHY_OTGVDET_EN (1 << 19) +#define USBPHY_OTGSESSEND_EN (1 << 20) +#define USBPHY_DATA_POLARITY (1 << 23) + #if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) u32 omap1_usb0_init(unsigned nwires, unsigned is_device); u32 omap1_usb1_init(unsigned nwires); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 313eb26..bb0af66 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -88,12 +88,20 @@ config S5P_GPIO_DRVSTR config SAMSUNG_GPIO_EXTRA int "Number of additional GPIO pins" + default 128 if SAMSUNG_GPIO_EXTRA128 + default 64 if SAMSUNG_GPIO_EXTRA64 default 0 help Use additional GPIO space in addition to the GPIO's the SOC provides. This allows expanding the GPIO space for use with GPIO expanders. +config SAMSUNG_GPIO_EXTRA64 + bool + +config SAMSUNG_GPIO_EXTRA128 + bool + config S3C_GPIO_SPACE int "Space between gpio banks" default 0 diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index e657305..a976c02 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/io.h> #include <linux/pwm_backlight.h> -#include <linux/slab.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> |