diff options
Diffstat (limited to 'arch/arm')
681 files changed, 15806 insertions, 13897 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 33d2887..29b85e6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -5,8 +5,9 @@ config ARM select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_WANT_IPC_PARSE_VERSION + select BUILDTIME_EXTABLE_SORT if MMU select CPU_PM if (SUSPEND || CPU_IDLE) - select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN + select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IRQ_PROBE @@ -21,6 +22,7 @@ config ARM select HAVE_AOUT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT select HAVE_C_RECORDMCOUNT @@ -330,6 +332,8 @@ config ARCH_AT91 select IRQ_DOMAIN select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD + select PINCTRL + select PINCTRL_AT91 if USE_OF help This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. @@ -542,6 +546,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PCI_QUIRKS select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: @@ -581,6 +586,7 @@ config ARCH_MMP select GPIO_PXA select IRQ_DOMAIN select NEED_MACH_GPIO_H + select PINCTRL select PLAT_PXA select SPARSE_IRQ help @@ -899,6 +905,7 @@ config ARCH_NOMADIK config PLAT_SPEAR bool "ST SPEAr" + select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP @@ -932,7 +939,6 @@ config ARCH_OMAP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK - select NEED_MACH_GPIO_H help Support for TI's OMAP platform (OMAP1/2/3/4). @@ -954,7 +960,6 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" select ARM_AMBA select ARM_GIC - select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS select ICST @@ -1167,7 +1172,7 @@ config ARM_NR_BANKS config IWMMXT bool "Enable iWMMXt support" depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP + default y if PXA27x || PXA3xx || ARCH_MMP help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 58afa0d..9c60f47 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -32,6 +32,7 @@ KBUILD_DEFCONFIG := versatile_defconfig # defines filename extension depending memory management type. ifeq ($(CONFIG_MMU),) MMUEXT := -nommu +KBUILD_CFLAGS += $(call cc-option,-mno-unaligned-access) endif ifeq ($(CONFIG_FRAME_POINTER),y) @@ -200,7 +201,6 @@ machine-$(CONFIG_ARCH_SUNXI) += sunxi # by CONFIG_* macro name. plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_S3C64XX) += samsung -plat-$(CONFIG_ARCH_ZYNQ) += versatile plat-$(CONFIG_PLAT_IOP) += iop plat-$(CONFIG_PLAT_NOMADIK) += nomadik plat-$(CONFIG_PLAT_ORION) += orion @@ -293,10 +293,10 @@ zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ %.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs # We use MRPROPER_FILES and CLEAN_FILES now archclean: diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9137df5..abfce28 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,8 +15,6 @@ ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif -include $(srctree)/arch/arm/boot/dts/Makefile - # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR @@ -59,16 +57,6 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE endif -targets += $(dtb-y) - -# Rule to build device tree blobs -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) - -clean-files := *.dtb - ifneq ($(LOADADDR),) UIMAGE_LOADADDR=$(LOADADDR) else diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3f9e9fe4d..5cad8a6 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -49,10 +49,6 @@ ifeq ($(CONFIG_ARCH_SA1100),y) OBJS += head-sa1100.o endif -ifeq ($(CONFIG_ARCH_VT8500),y) -OBJS += head-vt8500.o -endif - ifeq ($(CONFIG_CPU_XSCALE),y) OBJS += head-xscale.o endif diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S deleted file mode 100644 index 1dc1e21..0000000 --- a/arch/arm/boot/compressed/head-vt8500.S +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/head-vt8500.S - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * VIA VT8500 specific tweaks. This is merged into head.S by the linker. - * - */ - -#include <linux/linkage.h> -#include <asm/mach-types.h> - - .section ".start", "ax" - -__VT8500_start: - @ Compare the SCC ID register against a list of known values - ldr r1, .SCCID - ldr r3, [r1] - - @ VT8500 override - ldr r4, .VT8500SCC - cmp r3, r4 - ldreq r7, .ID_BV07 - beq .Lendvt8500 - - @ WM8505 override - ldr r4, .WM8505SCC - cmp r3, r4 - ldreq r7, .ID_8505 - beq .Lendvt8500 - - @ Otherwise, leave the bootloader's machine id untouched - -.SCCID: - .word 0xd8120000 -.VT8500SCC: - .word 0x34000102 -.WM8505SCC: - .word 0x34260103 - -.ID_BV07: - .word MACH_TYPE_BV07 -.ID_8505: - .word MACH_TYPE_WM8505_7IN_NETBOOK - -.Lendvt8500: diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 90275f0..49ca86e 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -652,6 +652,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size mov pc, lr ENDPROC(__setup_mmu) +@ Enable unaligned access on v6, to allow better code generation +@ for the decompressor C code: +__armv6_mmu_cache_on: + mrc p15, 0, r0, c1, c0, 0 @ read SCTLR + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + mcr p15, 0, r0, c1, c0, 0 @ write SCTLR + b __armv4_mmu_cache_on + __arm926ejs_mmu_cache_on: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mov r0, #4 @ put dcache in WT mode @@ -694,6 +703,9 @@ __armv7_mmu_cache_on: bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + @ (needed for ARM1176) #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables @@ -914,7 +926,7 @@ proc_types: .word 0x0007b000 @ ARMv6 .word 0x000ff000 - W(b) __armv4_mmu_cache_on + W(b) __armv6_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f872edf..4291786 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,21 +1,37 @@ ifeq ($(CONFIG_OF),y) -dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ - at91sam9263ek.dtb \ - at91sam9g20ek_2mmc.dtb \ - at91sam9g20ek.dtb \ - at91sam9g25ek.dtb \ - at91sam9m10g45ek.dtb \ - at91sam9n12ek.dtb \ - ethernut5.dtb \ - evk-pro3.dtb \ - kizbox.dtb \ - tny_a9260.dtb \ - tny_a9263.dtb \ - tny_a9g20.dtb \ - usb_a9260.dtb \ - usb_a9263.dtb \ - usb_a9g20.dtb +# Keep at91 dtb files sorted alphabetically for each SoC +# rm9200 +dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb +# sam9260 +dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb +dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb +dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb +dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb +# sam9263 +dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb +# sam9g20 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb +dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb +# sam9g45 +dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb +dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb +# sam9n12 +dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb +# sam9x5 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ @@ -66,15 +82,17 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3-beagle.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ - omap4-pandaES.dtb \ - omap4-var_som.dtb \ + omap4-panda-es.dtb \ + omap4-var-som.dtb \ omap4-sdp.dtb \ omap5-evm.dtb \ am335x-evm.dtb \ + am335x-evmsk.dtb \ am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb @@ -109,4 +127,12 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb +targets += dtbs endif + +# *.dtb used to be generated in the directory above. Clean out the +# old build results so people don't accidentally use them. +dtbs: $(addprefix $(obj)/, $(dtb-y)) + $(Q)rm -f $(obj)/../*.dtb + +clean-files := *.dtb diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87..2c33888 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -13,11 +13,31 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -33,6 +53,36 @@ }; }; + + leds { + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio2 21 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio2 22 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio2 23 0>; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio2 24 0>; + default-state = "off"; + }; + }; }; /include/ "tps65217.dtsi" diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 185d632..9f65f17 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -13,11 +13,39 @@ model = "TI AM335x EVM"; compatible = "ti,am335x-evm", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */ + 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */ + 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */ + 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */ + 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -31,6 +59,49 @@ reg = <0x2d>; }; }; + + i2c2: i2c@4802a000 { + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + }; }; vbat: fixedregulator@0 { @@ -40,6 +111,53 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ + &gpio2 26 0 /* Bank1, pin26 */ + &gpio2 27 0>; /* Bank1, pin27 */ + + col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ + &gpio2 22 0>; /* Bank1, pin22 */ + + linux,keymap = <0x0000008b /* MENU */ + 0x0100009e /* BACK */ + 0x02000069 /* LEFT */ + 0x0001006a /* RIGHT */ + 0x0101001c /* ENTER */ + 0x0201006c>; /* DOWN */ + }; + + gpio_keys: volume_keys@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + switch@9 { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio1 2 1>; + gpio-key,wakeup; + }; + + switch@10 { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio1 3 1>; + gpio-key,wakeup; + }; + }; }; /include/ "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts new file mode 100644 index 0000000..f5a6162 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -0,0 +1,250 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * AM335x Starter Kit + * http://www.ti.com/tool/tmdssk3358 + */ + +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM-SK"; + compatible = "ti,am335x-evmsk", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */ + 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */ + 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */ + 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ + >; + }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */ + 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */ + 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */ + 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ + >; + }; + }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "evmsk:green:usr0"; + gpios = <&gpio2 4 0>; + default-state = "off"; + }; + + led@2 { + label = "evmsk:green:usr1"; + gpios = <&gpio2 5 0>; + default-state = "off"; + }; + + led@3 { + label = "evmsk:green:mmc0"; + gpios = <&gpio2 6 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "evmsk:green:heartbeat"; + gpios = <&gpio2 7 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + gpio_buttons: gpio_buttons@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + switch@1 { + label = "button0"; + linux,code = <0x100>; + gpios = <&gpio3 3 0>; + }; + + switch@2 { + label = "button1"; + linux,code = <0x101>; + gpios = <&gpio3 2 0>; + }; + + switch@3 { + label = "button2"; + linux,code = <0x102>; + gpios = <&gpio1 30 0>; + gpio-key,wakeup; + }; + + switch@4 { + label = "button3"; + linux,code = <0x103>; + gpios = <&gpio3 5 0>; + }; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bb31bff..20a3f29 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,am33xx"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -25,6 +26,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a8"; + + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 720000 1285000 + 600000 1225000 + 500000 1125000 + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; @@ -40,6 +56,15 @@ }; }; + am33xx_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x0238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex.Since @@ -70,7 +95,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x44e07000 0x1000>; - interrupt-parent = <&intc>; interrupts = <96>; }; @@ -82,7 +106,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x4804c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <98>; }; @@ -94,7 +117,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ac000 0x1000>; - interrupt-parent = <&intc>; interrupts = <32>; }; @@ -106,7 +128,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ae000 0x1000>; - interrupt-parent = <&intc>; interrupts = <62>; }; @@ -115,7 +136,6 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; - interrupt-parent = <&intc>; interrupts = <72>; status = "disabled"; }; @@ -125,7 +145,6 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; - interrupt-parent = <&intc>; interrupts = <73>; status = "disabled"; }; @@ -135,7 +154,6 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; - interrupt-parent = <&intc>; interrupts = <74>; status = "disabled"; }; @@ -145,7 +163,6 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; - interrupt-parent = <&intc>; interrupts = <44>; status = "disabled"; }; @@ -155,7 +172,6 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; - interrupt-parent = <&intc>; interrupts = <45>; status = "disabled"; }; @@ -165,7 +181,6 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; - interrupt-parent = <&intc>; interrupts = <46>; status = "disabled"; }; @@ -176,7 +191,6 @@ #size-cells = <0>; ti,hwmods = "i2c1"; reg = <0x44e0b000 0x1000>; - interrupt-parent = <&intc>; interrupts = <70>; status = "disabled"; }; @@ -187,7 +201,6 @@ #size-cells = <0>; ti,hwmods = "i2c2"; reg = <0x4802a000 0x1000>; - interrupt-parent = <&intc>; interrupts = <71>; status = "disabled"; }; @@ -198,7 +211,6 @@ #size-cells = <0>; ti,hwmods = "i2c3"; reg = <0x4819c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <30>; status = "disabled"; }; @@ -207,8 +219,124 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; reg = <0x44e35000 0x1000>; - interrupt-parent = <&intc>; interrupts = <91>; }; + + dcan0: d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + interrupts = <52>; + status = "disabled"; + }; + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + status = "disabled"; + }; + + timer1: timer@44e31000 { + compatible = "ti,omap2-timer"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,omap2-timer"; + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,omap2-timer"; + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,omap2-timer"; + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; + ti,timer-pwm; + }; + + timer5: timer@48046000 { + compatible = "ti,omap2-timer"; + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; + ti,timer-pwm; + }; + + timer6: timer@48048000 { + compatible = "ti,omap2-timer"; + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; + ti,timer-pwm; + }; + + timer7: timer@4804a000 { + compatible = "ti,omap2-timer"; + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; + ti,timer-pwm; + }; + + rtc@44e3e000 { + compatible = "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <75 + 76>; + ti,hwmods = "rtc"; + }; + + spi0: spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48030000 0x400>; + interrupt = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x481a0000 0x400>; + interrupt = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; + status = "disabled"; + }; + + usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; + }; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts new file mode 100644 index 0000000..74d92cd --- /dev/null +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -0,0 +1,178 @@ +/* + * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only. + */ + +/dts-v1/; +/include/ "at91sam9260.dtsi" + +/ { + model = "Somfy Animeo IP"; + compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; + + aliases { + serial0 = &usart1; + serial1 = &usart2; + serial2 = &usart0; + serial3 = &dbgu; + serial4 = &usart3; + serial5 = &uart0; + serial6 = &uart1; + }; + + chosen { + linux,stdout-path = &usart2; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart1: serial@fffb4000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart2: serial@fffb8000 { + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; + phy-mode = "mii"; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = <&pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x8000>; + }; + + barebox@8000 { + label = "barebox"; + reg = <0x8000 0x40000>; + }; + + bareboxenv@48000 { + label = "bareboxenv"; + reg = <0x48000 0x8000>; + }; + + user_block@0x50000 { + label = "user_block"; + reg = <0x50000 0xb0000>; + }; + + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x1b0000>; + }; + + root@2b0000 { + label = "root"; + reg = <0x2b0000 0x1D50000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + atmel,vbus-gpio = <&pioB 15 1>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green { + label = "power_green"; + gpios = <&pioC 17 0>; + linux,default-trigger = "heartbeat"; + }; + + power_red { + label = "power_red"; + gpios = <&pioA 2 0>; + }; + + tx_green { + label = "tx_green"; + gpios = <&pioC 19 0>; + }; + + tx_red { + label = "tx_red"; + gpios = <&pioC 18 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + keyswitch_in { + label = "keyswitch_in"; + gpios = <&pioB 1 0>; + linux,code = <28>; + gpio-key,wakeup; + }; + + error_in { + label = "error_in"; + gpios = <&pioB 2 0>; + linux,code = <29>; + gpio-key,wakeup; + }; + + btn { + label = "btn"; + gpios = <&pioC 23 0>; + linux,code = <31>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi new file mode 100644 index 0000000..e154f24 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -0,0 +1,349 @@ +/* + * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Based on at91sam9260.dtsi + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91RM9200 family SoC"; + compatible = "atmel,at91rm9200"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm920t"; + }; + }; + + memory { + reg = <0x20000000 0x04000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <25 26 27 28 29 30 31>; + }; + + ramc0: ramc@ffffff00 { + compatible = "atmel,at91rm9200-sdramc"; + reg = <0xffffff00 0x100>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + st: timer@fffffd00 { + compatible = "atmel,at91rm9200-st"; + reg = <0xfffffd00 0x100>; + interrupts = <1 4 7>; + }; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 4 0 18 4 0 19 4 0>; + }; + + tcb1: timer@fffa4000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa4000 0x100>; + interrupts = <20 4 0 21 4 0 22 4 0>; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffffffff /* pioA */ + 0xffffffff 0x083fffff /* pioB */ + 0xffff3fff 0x00000000 /* pioC */ + 0x03ff87ff 0x0fffff80 /* pioD */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A */ + 0 31 0x1 0x1>; /* PA31 periph with pullup */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0>; /* PA18 periph A */ + }; + + pinctrl_uart0_rts: uart0_rts-0 { + atmel,pins = + <0 20 0x1 0x0>; /* PA20 periph A */ + }; + + pinctrl_uart0_cts: uart0_cts-0 { + atmel,pins = + <0 21 0x1 0x0>; /* PA21 periph A */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <1 20 0x1 0x1 /* PB20 periph A with pullup */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + + pinctrl_uart1_rts: uart1_rts-0 { + atmel,pins = + <1 24 0x1 0x0>; /* PB24 periph A */ + }; + + pinctrl_uart1_cts: uart1_cts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 25 0x1 0x0>; /* PB25 periph A */ + }; + + pinctrl_uart1_dcd: uart1_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_uart1_ri: uart1_ri-0 { + atmel,pins = + <1 18 0x1 0x0>; /* PB18 periph A */ + }; + }; + + uart2 { + pinctrl_uart2: uart2-0 { + atmel,pins = + <0 22 0x1 0x0 /* PA22 periph A */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 30 0x2 0x0>; /* PA30 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 31 0x2 0x0>; /* PA31 periph B */ + }; + }; + + uart3 { + pinctrl_uart3: uart3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 6 0x2 0x0>; /* PA6 periph B */ + }; + + pinctrl_uart3_rts: uart3_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart3_cts: uart3_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ + 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "disabled"; + }; + + usart0: serial@fffc0000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc0000 0x200>; + interrupts = <6 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + usart1: serial@fffc4000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc4000 0x200>; + interrupts = <7 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + + usart2: serial@fffc8000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc8000 0x200>; + interrupts = <8 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; + }; + + usart3: serial@fffcc000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffcc000 0x200>; + interrupts = <23 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; + }; + + usb1: gadget@fffb0000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffb0000 0x4000>; + interrupts = <11 4 2>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "soft"; + gpios = <&pioC 2 0 + 0 + &pioB 1 0 + >; + status = "disabled"; + }; + + usb0: ohci@00300000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00300000 0x100000>; + interrupts = <23 4 2>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts new file mode 100644 index 0000000..8aa4893 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -0,0 +1,79 @@ +/* + * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit + * + * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91rm9200.dtsi" + +/ { + model = "Atmel AT91RM9200 evaluation kit"; + compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart1: serial@fffc4000 { + pinctrl-0 = + <&pinctrl_uart1 + &pinctrl_uart1_rts + &pinctrl_uart1_cts + &pinctrl_uart1_dtr_dsr + &pinctrl_uart1_dcd + &pinctrl_uart1_ri>; + status = "okay"; + }; + + usb1: gadget@fffb0000 { + atmel,vbus-gpio = <&pioD 4 0>; + status = "okay"; + }; + }; + + usb0: ohci@00300000 { + num-ports = <2>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds2 { + label = "green"; + gpios = <&pioB 0 0x1>; + linux,default-trigger = "mmc0"; + }; + + ds4 { + label = "yellow"; + gpios = <&pioB 1 0x1>; + linux,default-trigger = "heartbeat"; + }; + + ds6 { + label = "red"; + gpios = <&pioB 2 0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d410581..b1d3fab 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -21,8 +21,8 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; - serial5 = &usart4; - serial6 = &usart5; + serial5 = &uart0; + serial6 = &uart1; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -98,40 +98,250 @@ interrupts = <26 4 0 27 4 0 28 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x1>; /* PB15 periph with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 27 0x1 0x0>; /* PB27 periph A */ + }; + + pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { + atmel,pins = + <1 24 0x1 0x0 /* PB24 periph A */ + 1 22 0x1 0x0>; /* PB22 periph A */ + }; + + pinctrl_usart0_dcd: usart0_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_usart0_ri: usart0_ri-0 { + atmel,pins = + <1 25 0x1 0x0>; /* PB25 periph A */ + }; + }; - pioC: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <2 6 0x1 0x1 /* PB6 periph A with pullup */ + 2 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <1 28 0x1 0x0>; /* PB28 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <1 29 0x1 0x0>; /* PB29 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB8 periph A with pullup */ + 1 9 0x1 0x0>; /* PB9 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 10 0x1 0x1 /* PB10 periph A with pullup */ + 2 11 0x1 0x0>; /* PB11 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PB8 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 10 0x2 0x0>; /* PB10 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 31 0x2 0x1 /* PA31 periph B with pullup */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 12 0x1 0x1 /* PB12 periph A with pullup */ + 2 13 0x1 0x0>; /* PB13 periph A */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0 /* PA19 periph A */ + 0 20 0x1 0x0 /* PA20 periph A */ + 0 21 0x1 0x0>; /* PA21 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 22 0x2 0x0 /* PA22 periph B */ + 0 23 0x2 0x0 /* PA23 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + + pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { + atmel,pins = + <0 10 0x2 0x0 /* PA10 periph B */ + 0 11 0x2 0x0 /* PA11 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 1 0x2 0x1 /* PA1 periph B with pullup */ + 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 4 0x2 0x1 /* PA4 periph B with pullup */ + 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -141,6 +351,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -150,6 +362,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -159,6 +373,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -168,24 +384,30 @@ interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; - usart4: serial@fffd4000 { + uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; status = "disabled"; }; - usart5: serial@fffd8000 { + uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "disabled"; }; @@ -193,6 +415,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -212,6 +436,15 @@ status = "disabled"; }; + mmc0: mmc@fffa8000 { + compatible = "atmel,hsmci"; + reg = <0xfffa8000 0x600>; + interrupts = <9 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; @@ -257,6 +490,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 13 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 3e6e5c1..66106ee 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -89,60 +89,243 @@ reg = <0xfffffd10 0x10>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B */ + 0xfffffffb 0xffffe07f /* pioA */ + 0x0007ffff 0x39072fff /* pioB */ + 0xffffffff 0x3ffffff8 /* pioC */ + 0xfffffbff 0xffffffff /* pioD */ + 0xffe00fff 0xfbfcff00 /* pioE */ + >; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <2 30 0x1 0x0 /* PC30 periph A */ + 2 31 0x1 0x1>; /* PC31 periph with pullup */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 26 0x1 0x1 /* PA26 periph A with pullup */ + 0 27 0x1 0x0>; /* PA27 periph A */ + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 28 0x1 0x0>; /* PA28 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 29 0x1 0x0>; /* PA29 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <3 0 0x1 0x1 /* PD0 periph A with pullup */ + 3 1 0x1 0x0>; /* PD1 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 7 0x2 0x0>; /* PD7 periph B */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PD8 periph B */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <3 2 0x1 0x1 /* PD2 periph A with pullup */ + 3 3 0x1 0x0>; /* PD3 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <3 5 0x2 0x0>; /* PD5 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <4 6 0x2 0x0>; /* PD6 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ + 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <2 25 0x2 0x0 /* PC25 periph B */ + 4 21 0x1 0x0 /* PE21 periph A */ + 4 23 0x1 0x0 /* PE23 periph A */ + 4 24 0x1 0x0 /* PE24 periph A */ + 4 25 0x1 0x0 /* PE25 periph A */ + 4 26 0x1 0x0 /* PE26 periph A */ + 4 27 0x1 0x0 /* PE27 periph A */ + 4 28 0x1 0x0 /* PE28 periph A */ + 4 29 0x1 0x0 /* PE29 periph A */ + 4 30 0x1 0x0>; /* PE30 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 22 0x2 0x0 /* PC22 periph B */ + 2 23 0x2 0x0 /* PC23 periph B */ + 2 24 0x2 0x0 /* PC24 periph B */ + 2 25 0x2 0x0 /* PC25 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 4 22 0x2 0x0>; /* PE22 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 12 0x1 0x0>; /* PA12 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_clk: mmc1_clk-0 { + atmel,pins = + <0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { + atmel,pins = + <0 21 0x1 0x1 /* PA21 periph A with pullup */ + 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { + atmel,pins = + <0 23 0x1 0x1 /* PA23 periph A with pullup */ + 0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -152,6 +335,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -161,6 +346,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -170,6 +357,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -177,6 +366,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -195,6 +386,24 @@ #size-cells = <0>; status = "disabled"; }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <10 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fff84000 { + compatible = "atmel,hsmci"; + reg = <0xfff84000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -206,6 +415,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioA 22 0 &pioD 15 0 0 diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index f86ac4b..1eb0872 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -38,6 +38,10 @@ }; usart0: serial@fff8c000 { + pinctrl-0 = < + &pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; status = "okay"; }; @@ -50,6 +54,31 @@ atmel,vbus-gpio = <&pioA 25 0>; status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 18 0>; + wp-gpios = <&pioE 19 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ + 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi new file mode 100644 index 0000000..fbe7a70 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G15 SoC"; + compatible = "atmel, at91sam9g15, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0x00000000 /* pioA */ + 0x00040000 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts new file mode 100644 index 0000000..86dd3f6 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g15.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index f1b2e14..66467b1 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -12,6 +12,32 @@ model = "Atmel at91sam9g20ek 2 mmc"; compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9"; + ahb { + apb{ + mmc0: mmc@fffa8000 { + /* clk already mux wuth slot0 */ + pinctrl-0 = < + &pinctrl_board_mmc0_slot0 + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioC 2 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot0 { + pinctrl_board_mmc0_slot0: mmc0_slot0-board { + atmel,pins = + <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index e6391a4..32a500a 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -35,6 +35,13 @@ }; usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; status = "okay"; }; @@ -51,6 +58,29 @@ atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi new file mode 100644 index 0000000..05a718f --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G25 SoC"; + compatible = "atmel, at91sam9g25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000001c /* pioA */ + 0x0007ffff 0x8000fe3f 0x00000000 /* pioB */ + 0x80000000 0x07c0ffff 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 877c08f..c5ab16f 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,55 +7,10 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x5.dtsi" -/include/ "at91sam9x5cm.dtsi" +/include/ "at91sam9g25.dtsi" +/include/ "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; - - chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@f801c000 { - status = "okay"; - }; - - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - i2c0: i2c@f8010000 { - status = "okay"; - }; - - i2c1: i2c@f8014000 { - status = "okay"; - }; - - i2c2: i2c@f8018000 { - status = "okay"; - }; - }; - - usb0: ohci@00600000 { - status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 - >; - }; - - usb1: ehci@00700000 { - status = "okay"; - }; - }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi new file mode 100644 index 0000000..f9d14a7 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G35 SoC"; + compatible = "atmel, at91sam9g35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts new file mode 100644 index 0000000..95944bd --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G35-EK"; + compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3add030..0741cae 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -108,60 +108,243 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc003ff /* pioA */ + 0xffffffff 0x800f8f00 /* pioB */ + 0xffffffff 0x00000e00 /* pioC */ + 0xffffffff 0xff0c1381 /* pioD */ + 0xffffffff 0x81ffff81 /* pioE */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0>; /* PB13 periph A */ + }; + }; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 19 0x1 0x1 /* PB19 periph A with pullup */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 17 0x2 0x0>; /* PB17 periph B */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 15 0x2 0x0>; /* PB15 periph B */ + }; + }; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + uart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <1 4 0x1 0x1 /* PB4 periph A with pullup */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 16 0x1 0x0>; /* PD16 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 17 0x1 0x0>; /* PD17 periph A */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 6 0x1 0x1 /* PB6 periph A with pullup */ + 1 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <2 9 0x2 0x0>; /* PC9 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <2 11 0x2 0x0>; /* PC11 periph B */ + }; + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB9 periph A with pullup */ + 1 9 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <0 23 0x2 0x0>; /* PA23 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <0 24 0x2 0x0>; /* PA24 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 10 0x1 0x0 /* PA10 periph A */ + 0 11 0x1 0x0 /* PA11 periph A */ + 0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0>; /* PA19 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 6 0x2 0x0 /* PA6 periph B */ + 0 7 0x2 0x0 /* PA7 periph B */ + 0 8 0x2 0x0 /* PA8 periph B */ + 0 9 0x2 0x0 /* PA9 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0 /* PA29 periph B */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A */ + 0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 31 0x1 0x0 /* PA31 periph A */ + 0 22 0x1 0x1 /* PA22 periph A with pullup */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1 /* PA25 periph A with pullup */ + 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { + atmel,pins = + <0 27 0x1 0x1 /* PA27 periph A with pullup */ + 0 28 0x1 0x1 /* PA28 periph A with pullup */ + 0 29 0x1 0x1 /* PA29 periph A with pullup */ + 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -171,6 +354,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -180,6 +365,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -189,6 +376,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -198,6 +387,8 @@ interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -205,6 +396,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -262,6 +455,24 @@ trigger-value = <0x6>; }; }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fffd0000 { + compatible = "atmel,hsmci"; + reg = <0xfffd0000 0x600>; + interrupts = <29 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -273,6 +484,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 8 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 15e1dd4..20c3191 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -39,6 +39,10 @@ }; usart1: serial@fff90000 { + pinctrl-0 = + <&pinctrl_usart1 + &pinctrl_usart1_rts + &pinctrl_usart1_cts>; status = "okay"; }; @@ -54,6 +58,50 @@ i2c1: i2c@fff88000 { status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 10 0>; + }; + }; + + mmc1: mmc@fffd0000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 11 0>; + wp-gpios = <&pioD 29 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ + 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 82508d6..e9efb34 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -84,6 +84,15 @@ reg = <0xfffffe10 0x10>; }; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -102,50 +111,186 @@ interrupts = <20 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe07983 0x00000000 /* pioA */ + 0x00040000 0x00047e0f 0x00000000 /* pioB */ + 0xfdffffff 0x07c00000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph with pullup */ + }; + }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x0>; /* PA0 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 7 0x1 0x0>; /* PA7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 23 0x2 0x1 /* PC23 periph B with pullup */ + 2 22 0x2 0x0>; /* PC22 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <2 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <2 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <2 9 0x3 0x1 /* PC9 periph C with pullup */ + 2 8 0x3 0x0>; /* PC8 periph C */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 16 0x3 0x1 /* PC17 periph C with pullup */ + 2 17 0x3 0x0>; /* PC16 periph C */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ + 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 11 0x2 0x1 /* PA11 periph B with pullup */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 13 0x2 0x1 /* PA13 periph B with pullup */ + 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -155,6 +300,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -164,6 +311,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -173,6 +322,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -182,6 +333,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -215,6 +368,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 912b2c2..0376bf4 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -45,6 +45,28 @@ i2c1: i2c@f8014000 { status = "okay"; }; + + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioA 7 0>; + }; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi new file mode 100644 index 0000000..54eb33b --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -0,0 +1,49 @@ +/* + * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X25 SoC"; + compatible = "atmel, at91sam9x25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000001c /* pioA */ + 0x0007ffff 0x00047e3f 0x00000000 /* pioB */ + 0x80000000 0xfffd0000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <2 16 0x2 0x0 /* PC16 periph B */ + 2 18 0x2 0x0 /* PC18 periph B */ + 2 19 0x2 0x0 /* PC19 periph B */ + 2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 2 28 0x2 0x0 /* PC28 periph B */ + 2 29 0x2 0x0 /* PC29 periph B */ + 2 30 0x2 0x0 /* PC30 periph B */ + 2 31 0x2 0x0>; /* PC31 periph B */ + }; + }; + }; + + macb1: ethernet@f8030000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts new file mode 100644 index 0000000..af907ea --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x25.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi new file mode 100644 index 0000000..fb102d6 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X35 SoC"; + compatible = "atmel, at91sam9x35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts new file mode 100644 index 0000000..5ccb607 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9X35-EK"; + compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 03fc136..7ee49e8 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -111,50 +111,244 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 0 0x1 0x1 /* PA0 periph A with pullup */ + 0 1 0x1 0x0>; /* PA1 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 5 0x1 0x1 /* PA5 periph A with pullup */ + 0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 27 0x3 0x0>; /* PC27 periph C */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 28 0x3 0x0>; /* PC28 periph C */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_uart3: usart3-0 { + atmel,pins = + <3 23 0x2 0x1 /* PC22 periph B with pullup */ + 3 23 0x2 0x0>; /* PC23 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <3 8 0x3 0x0 /* PC8 periph C */ + 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <3 16 0x3 0x0 /* PC16 periph C */ + 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ + 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A */ + 1 1 0x1 0x0 /* PB1 periph A */ + 1 2 0x1 0x0 /* PB2 periph A */ + 1 3 0x1 0x0 /* PB3 periph A */ + 1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0 /* PB5 periph A */ + 1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0>; /* PB10 periph A */ + }; + + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { + atmel,pins = + <1 8 0x1 0x0 /* PA8 periph A */ + 1 11 0x1 0x0 /* PA11 periph A */ + 1 12 0x1 0x0 /* PA12 periph A */ + 1 13 0x1 0x0 /* PA13 periph A */ + 1 14 0x1 0x0 /* PA14 periph A */ + 1 15 0x1 0x0 /* PA15 periph A */ + 1 16 0x1 0x0 /* PA16 periph A */ + 1 17 0x1 0x0>; /* PA17 periph A */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 13 0x2 0x0 /* PA13 periph B */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 2 0x2 0x1 /* PA2 periph B with pullup */ + 0 3 0x2 0x1 /* PA3 periph B with pullup */ + 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc1: mmc@f000c000 { + compatible = "atmel,hsmci"; + reg = <0xf000c000 0x600>; + interrupts = <26 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -164,6 +358,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -173,6 +369,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -182,6 +380,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -189,6 +389,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; }; @@ -273,6 +475,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi new file mode 100644 index 0000000..8a7cf1d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -0,0 +1,101 @@ +/* + * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "at91sam9x5cm.dtsi" + +/ { + model = "Atmel AT91SAM9X5-EK"; + compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0>; + }; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 14 0>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + i2c2: i2c@f8018000 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 19 1 + &pioD 20 1 + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 4b0e0ca..731086b 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -203,6 +203,14 @@ reg = <0x80157450 0xC>; }; + thermal@801573c0 { + compatible = "stericsson,db8500-thermal"; + reg = <0x801573c0 0x40>; + interrupts = <21 0x4>, <22 0x4>; + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; + status = "disabled"; + }; + db8500-prcmu-regulators { compatible = "stericsson,db8500-prcmu-regulator"; @@ -660,5 +668,11 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + cpufreq-cooling { + compatible = "stericsson,db8500-cpufreq-cooling"; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 55c57ea..b4587b2 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -799,6 +799,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 6176775..c9c3fa3 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -18,6 +18,11 @@ bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; }; + syscon { + /* AP system controller registers */ + reg = <0x11000000 0x100>; + }; + timer0: timer@13000000 { compatible = "arm,integrator-timer"; }; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 2dd5e4e..8b11939 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -18,6 +18,11 @@ bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; + cpcon { + /* CP controller registers */ + reg = <0xcb000000 0x100>; + }; + timer0: timer@13000000 { compatible = "arm,sp804", "arm,primecell"; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 581cb08..761c4b6 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -65,5 +66,90 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; }; + + timer2: timer@4802a000 { + compatible = "ti,omap2-timer"; + reg = <0x4802a000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48078000 { + compatible = "ti,omap2-timer"; + reg = <0x48078000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@4807a000 { + compatible = "ti,omap2-timer"; + reg = <0x4807a000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@4807c000 { + compatible = "ti,omap2-timer"; + reg = <0x4807c000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4807e000 { + compatible = "ti,omap2-timer"; + reg = <0x4807e000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@48080000 { + compatible = "ti,omap2-timer"; + reg = <0x48080000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@48082000 { + compatible = "ti,omap2-timer"; + reg = <0x48082000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-dsp; + }; + + timer9: timer@48084000 { + compatible = "ti,omap2-timer"; + reg = <0x48084000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@4808a000 { + compatible = "ti,omap2-timer"; + reg = <0x4808a000 0x400>; + interrupts = <48>; + ti,hwmods = "timer12"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index bfd76b4..af65609 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + counter32k: counter@48004000 { + compatible = "ti,omap-counter32k"; + reg = <0x48004000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2420_pmx: pinmux@48000030 { compatible = "ti,omap2420-padconf", "pinctrl-single"; reg = <0x48000030 0x0113>; @@ -30,7 +36,6 @@ interrupts = <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp1"; }; @@ -41,8 +46,15 @@ interrupts = <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp2"; }; + + timer1: timer@48028000 { + compatible = "ti,omap2-timer"; + reg = <0x48028000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 4565d97..c392445 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + counter32k: counter@49020000 { + compatible = "ti,omap-counter32k"; + reg = <0x49020000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2430_pmx: pinmux@49002030 { compatible = "ti,omap2430-padconf", "pinctrl-single"; reg = <0x49002030 0x0154>; @@ -32,7 +38,6 @@ <60>, /* RX interrupt */ <61>; /* RX overflow interrupt */ interrupt-names = "common", "tx", "rx", "rx_overflow"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -45,7 +50,6 @@ <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -58,7 +62,6 @@ <89>, /* TX interrupt */ <90>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -71,7 +74,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -84,9 +86,16 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@49018000 { + compatible = "ti,omap2-timer"; + reg = <0x49018000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index c38cf76..3705a81 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -55,12 +55,6 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator-vsim { - compatible = "ti,twl4030-vsim"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - twl_audio: audio { compatible = "ti,twl4030-audio"; codec { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts new file mode 100644 index 0000000..f624dc8 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 696e929..1acc261 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap3430", "ti,omap3"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -60,6 +61,12 @@ ranges; ti,hwmods = "l3_main"; + counter32k: counter@48320000 { + compatible = "ti,omap-counter32k"; + reg = <0x48320000 0x20>; + ti,hwmods = "counter_32k"; + }; + intc: interrupt-controller@48200000 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -240,7 +247,6 @@ <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -255,7 +261,6 @@ <63>, /* RX interrupt */ <4>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <1280>; ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; @@ -270,7 +275,6 @@ <90>, /* RX interrupt */ <5>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; @@ -283,7 +287,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -296,9 +299,103 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@48318000 { + compatible = "ti,omap2-timer"; + reg = <0x48318000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@49032000 { + compatible = "ti,omap2-timer"; + reg = <0x49032000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@49034000 { + compatible = "ti,omap2-timer"; + reg = <0x49034000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@49036000 { + compatible = "ti,omap2-timer"; + reg = <0x49036000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@49038000 { + compatible = "ti,omap2-timer"; + reg = <0x49038000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4903a000 { + compatible = "ti,omap2-timer"; + reg = <0x4903a000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4903c000 { + compatible = "ti,omap2-timer"; + reg = <0x4903c000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4903e000 { + compatible = "ti,omap2-timer"; + reg = <0x4903e000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@49040000 { + compatible = "ti,omap2-timer"; + reg = <0x49040000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12"; + ti,timer-alwon; + ti,timer-secure; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts new file mode 100644 index 0000000..75466d2 --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Pandaboard Rev A4+ have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-panda-es.dts index d4ba43a..73bc1a6 100644 --- a/arch/arm/boot/dts/omap4-pandaES.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -22,3 +22,12 @@ "AFML", "Line In", "AFMR", "Line In"; }; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index e8f927c..4122efe 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -65,6 +65,8 @@ &twl6040_pins &mcpdm_pins &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins >; twl6040_pins: pinmux_twl6040_pins { @@ -92,6 +94,22 @@ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -184,3 +202,7 @@ &dmic { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts new file mode 100644 index 0000000..b4a40ff --- /dev/null +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-sdp.dts" + +/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5b7e04f..43e5258 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -124,6 +124,8 @@ &dmic_pins &mcbsp1_pins &mcbsp2_pins + &dss_hdmi_pins + &tpd12s015_pins >; uart2_pins: pinmux_uart2_pins { @@ -194,6 +196,22 @@ 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -406,3 +424,7 @@ &mcbsp3 { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 6601e6a..6601e6a 100644 --- a/arch/arm/boot/dts/omap4-var_som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3883f94..739bb79 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -95,6 +95,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap4_pmx_core: pinmux@4a100040 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a100040 0x0196>; @@ -340,7 +346,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -350,7 +355,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -361,7 +365,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -373,7 +376,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -385,7 +387,6 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -396,7 +397,6 @@ reg-names = "mpu"; interrupts = <0 16 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -431,12 +431,103 @@ hw-caps-temp-alert; }; - ocp2scp { + ocp2scp@4a0ad000 { compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; }; + + timer1: timer@4a318000 { + compatible = "ti,omap2-timer"; + reg = <0x4a318000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index c663eba..8722c15 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap5.dtsi" +/include/ "samsung_k3pe0e000b.dtsi" / { model = "TI OMAP5 EVM board"; @@ -15,7 +16,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ + reg = <0x80000000 0x80000000>; /* 2 GB */ }; vmmcsd_fixed: fixedregulator-mmcsd { @@ -140,3 +141,13 @@ &mcbsp3 { status = "disabled"; }; + +&emif1 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; + +&emif2 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 42c78be..790bb2a 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4ae04000 { + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; + }; + omap5_pmx_core: pinmux@4a002840 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; @@ -104,6 +110,8 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -113,6 +121,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -122,6 +132,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -131,6 +143,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -140,6 +154,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -149,6 +165,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -158,6 +176,8 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <0 35 0x4>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -167,6 +187,8 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <0 121 0x4>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -176,6 +198,8 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -183,6 +207,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -190,20 +216,26 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; }; - i2c4: i2c@4807A000 { + i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; }; - i2c5: i2c@4807C000 { + i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <0 60 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -211,42 +243,56 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; uart5: serial@48066000 { - compatible = "ti,omap5-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <0 105 0x4>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; uart6: serial@48068000 { - compatible = "ti,omap6-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <0 106 0x4>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -254,24 +300,32 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; @@ -287,7 +341,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -297,7 +350,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -308,7 +360,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -320,7 +371,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -332,9 +382,119 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; + + timer1: timer@4ae18000 { + compatible = "ti,omap2-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + emif1: emif@0x4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = <0 110 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@0x4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = <0 111 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts new file mode 100644 index 0000000..387fedb --- /dev/null +++ b/arch/arm/boot/dts/pm9g45.dts @@ -0,0 +1,165 @@ +/* + * pm9g45.dts - Device Tree file for Ronetix pm9g45 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g45.dtsi" + +/ { + model = "Ronetix pm9g45"; + compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x70000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + + board { + pinctrl_board_nand: nand0-board { + atmel,pins = + <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + mmc { + pinctrl_board_mmc: mmc0-board { + atmel,pins = + <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + }; + }; + }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 6 0>; + }; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + pinctrl-0 = <&pinctrl_board_nand>; + + gpios = <&pioD 3 0 + &pioC 14 0 + 0 + >; + + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x1A0000>; + }; + + kernel@200000 { + label = "bareboxenv2"; + reg = <0x200000 0x300000>; + }; + + kernel@500000 { + label = "root"; + reg = <0x500000 0x400000>; + }; + + data@900000 { + label = "data"; + reg = <0x900000 0x8340000>; + }; + }; + + usb0: ohci@00700000 { + status = "okay"; + num-ports = <2>; + }; + + usb1: ehci@00800000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "led0"; + gpios = <&pioD 0 1>; + linux,default-trigger = "nand-disk"; + }; + + led1 { + label = "led1"; + gpios = <&pioD 31 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + right { + label = "SW4"; + gpios = <&pioE 7 1>; + linux,code = <106>; + }; + + up { + label = "SW3"; + gpios = <&pioE 8 1>; + linux,code = <103>; + }; + }; +}; diff --git a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi new file mode 100644 index 0000000..9657a5c --- /dev/null +++ b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi @@ -0,0 +1,67 @@ +/* + * Timings and Geometry for Samsung K3PE0E000B memory part + */ + +/ { + samsung_K3PE0E000B: lpddr2 { + compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4"; + density = <4096>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <533333333>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <266666666>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 702c0ba..c6f85f0 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -99,6 +99,33 @@ status = "okay"; }; + prcmu@80157000 { + thermal@801573c0 { + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; + + status = "okay"; + }; + }; + external-bus@50000000 { status = "okay"; @@ -183,5 +210,9 @@ reg = <0x33>; }; }; + + cpufreq-cooling { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index dd4358b..2e4c572 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -181,6 +181,10 @@ status = "okay"; }; + gpio@d8400000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 419ea74..7cd25eb 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -70,6 +70,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1310-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -179,6 +185,27 @@ thermal@e07008c4 { st,thermal-flags = <0x7000>; }; + + gpiopinctrl: gpio@d8400000 { + compatible = "st,spear-plgpio"; + reg = <0xd8400000 0x1000>; + interrupts = <0 100 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 246>; + status = "disabled"; + + st-plgpio,ngpio = <246>; + st-plgpio,enb-reg = <0xd0>; + st-plgpio,wdata-reg = <0x90>; + st-plgpio,dir-reg = <0xb0>; + st-plgpio,ie-reg = <0x30>; + st-plgpio,rdata-reg = <0x70>; + st-plgpio,mis-reg = <0x10>; + st-plgpio,eit-reg = <0x50>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c9a54e0..045f712 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -193,6 +193,10 @@ status = "okay"; }; + gpio@e2800000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index d71fe2a..6c09eb0 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -24,6 +24,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1340-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -51,6 +57,26 @@ thermal@e07008c4 { st,thermal-flags = <0x2a00>; }; + + gpiopinctrl: gpio@e2800000 { + compatible = "st,spear-plgpio"; + reg = <0xe2800000 0x1000>; + interrupts = <0 107 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 252>; + status = "disabled"; + + st-plgpio,ngpio = <250>; + st-plgpio,wdata-reg = <0x40>; + st-plgpio,dir-reg = <0x00>; + st-plgpio,ie-reg = <0x80>; + st-plgpio,rdata-reg = <0x20>; + st-plgpio,mis-reg = <0xa0>; + st-plgpio,eit-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 62fc4fb..930303e 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -22,9 +22,10 @@ 0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b4000000 { + pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; + #gpio-range-cells = <2>; }; fsmc: flash@44000000 { @@ -75,6 +76,25 @@ reg = <0xb2200000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b4000000 { + compatible = "st,spear-plgpio"; + reg = <0xb4000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x10>; + st-plgpio,wdata-reg = <0x20>; + st-plgpio,dir-reg = <0x30>; + st-plgpio,ie-reg = <0x50>; + st-plgpio,rdata-reg = <0x40>; + st-plgpio,mis-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 082328b..ad4bfc6 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -164,6 +164,10 @@ status = "okay"; }; + gpio@b3000000 { + status = "okay"; + }; + i2c0: i2c@d0180000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 1f49d69..67d7ada 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -21,9 +21,10 @@ ranges = <0x40000000 0x40000000 0x80000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b3000000 { + pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; + #gpio-range-cells = <2>; }; clcd@90000000 { @@ -90,6 +91,26 @@ reg = <0xa4000000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b3000000 { + compatible = "st,spear-plgpio"; + reg = <0xb3000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x24>; + st-plgpio,wdata-reg = <0x34>; + st-plgpio,dir-reg = <0x44>; + st-plgpio,ie-reg = <0x64>; + st-plgpio,rdata-reg = <0x54>; + st-plgpio,mis-reg = <0x84>; + st-plgpio,eit-reg = <0x94>; + }; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 33ae813..e58a0e6 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -492,12 +492,12 @@ }; temperature-sensor@4c { - compatible = "nct1008"; + compatible = "onnn,nct1008"; reg = <0x4c>; }; magnetometer@c { - compatible = "ak8975"; + compatible = "ak,ak8975"; reg = <0xc>; interrupt-parent = <&gpio>; interrupts = <109 0x04>; /* gpio PN5 */ diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ff00017..63411b0 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -37,6 +37,24 @@ regulator-max-microvolt = <3150000>; }; + vusb1v5: regulator-vusb1v5 { + compatible = "ti,twl4030-vusb1v5"; + }; + + vusb1v8: regulator-vusb1v8 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + + vsim: regulator-vsim { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + twl_gpio: gpio { compatible = "ti,twl4030-gpio"; gpio-controller; @@ -44,4 +62,13 @@ interrupt-controller; #interrupt-cells = <1>; }; + + twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = <10>, <4>; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; + }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 123e2c4..9996cfc 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -86,4 +86,9 @@ clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; }; diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts index 37ca192..574bc04 100644 --- a/arch/arm/boot/dts/zynq-ep107.dts +++ b/arch/arm/boot/dts/zynq-ep107.dts @@ -36,16 +36,27 @@ ranges; intc: interrupt-controller@f8f01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; interrupt-controller; - compatible = "arm,gic"; - reg = <0xF8F01000 0x1000>; - #interrupt-cells = <2>; + reg = <0xF8F01000 0x1000>, + <0xF8F00100 0x100>; + }; + + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xF8F02000 0x1000>; + arm,data-latency = <2 3 2>; + arm,tag-latency = <2 3 2>; + cache-unified; + cache-level = <2>; }; uart0: uart@e0000000 { compatible = "xlnx,xuartps"; reg = <0xE0000000 0x1000>; - interrupts = <59 0>; + interrupts = <0 27 4>; clock = <50000000>; }; }; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index aa52699..36ae03a 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -70,6 +70,14 @@ struct gic_chip_data { static DEFINE_RAW_SPINLOCK(irq_controller_lock); /* + * The GIC mapping of CPU interfaces does not necessarily match + * the logical CPU numbering. Let's use a mapping as returned + * by the GIC itself. + */ +#define NR_GIC_CPU_IF 8 +static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly; + +/* * Supported arch specific GIC irq extension. * Default make them NULL. */ @@ -238,11 +246,11 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); u32 val, mask, bit; - if (cpu >= 8 || cpu >= nr_cpu_ids) + if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL; mask = 0xff << shift; - bit = 1 << (cpu_logical_map(cpu) + shift); + bit = gic_cpu_map[cpu] << shift; raw_spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; @@ -349,11 +357,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic) u32 cpumask; unsigned int gic_irqs = gic->gic_irqs; void __iomem *base = gic_data_dist_base(gic); - u32 cpu = cpu_logical_map(smp_processor_id()); - - cpumask = 1 << cpu; - cpumask |= cpumask << 8; - cpumask |= cpumask << 16; writel_relaxed(0, base + GIC_DIST_CTRL); @@ -366,6 +369,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) /* * Set all global interrupts to this CPU only. */ + cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0); for (i = 32; i < gic_irqs; i += 4) writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); @@ -389,9 +393,25 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) { void __iomem *dist_base = gic_data_dist_base(gic); void __iomem *base = gic_data_cpu_base(gic); + unsigned int cpu_mask, cpu = smp_processor_id(); int i; /* + * Get what the GIC says our CPU mask is. + */ + BUG_ON(cpu >= NR_GIC_CPU_IF); + cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0); + gic_cpu_map[cpu] = cpu_mask; + + /* + * Clear our mask from the other map entries in case they're + * still undefined. + */ + for (i = 0; i < NR_GIC_CPU_IF; i++) + if (i != cpu) + gic_cpu_map[i] &= ~cpu_mask; + + /* * Deal with the banked PPI and SGI interrupts - disable all * PPI interrupts, ensure all SGI interrupts are enabled. */ @@ -646,7 +666,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, { irq_hw_number_t hwirq_base; struct gic_chip_data *gic; - int gic_irqs, irq_base; + int gic_irqs, irq_base, i; BUG_ON(gic_nr >= MAX_GIC_NR); @@ -683,6 +703,13 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, } /* + * Initialize the CPU interface map to all CPUs. + * It will be refined as each CPU probes its ID. + */ + for (i = 0; i < NR_GIC_CPU_IF; i++) + gic_cpu_map[i] = 0xff; + + /* * For primary GICs, skip over SGIs. * For secondary GICs, skip over PPIs, too. */ @@ -737,7 +764,7 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) /* Convert our logical CPU mask into a physical one. */ for_each_cpu(cpu, mask) - map |= 1 << cpu_logical_map(cpu); + map |= gic_cpu_map[cpu]; /* * Ensure that stores to Normal memory are visible to the diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index df13a3f..9d2d3ba 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = { .set_mode = sp804_set_mode, .set_next_event = sp804_set_next_event, .rating = 300, - .cpumask = cpu_all_mask, }; static struct irqaction sp804_timer_irq = { @@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); evt->name = name; evt->irq = irq; + evt->cpumask = cpu_possible_mask; setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index e0d5388..e4df17c 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -218,7 +218,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq, v->resume_sources = resume_sources; v->irq = irq; vic_id++; - v->domain = irq_domain_add_legacy(node, fls(valid_sources), irq, 0, + v->domain = irq_domain_add_simple(node, fls(valid_sources), irq, &vic_irqdomain_ops, v); } @@ -350,7 +350,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, vic_register(base, irq_start, vic_sources, 0, node); } -void __init __vic_init(void __iomem *base, unsigned int irq_start, +void __init __vic_init(void __iomem *base, int irq_start, u32 vic_sources, u32 resume_sources, struct device_node *node) { @@ -407,7 +407,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, int __init vic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *regs; - int irq_base; if (WARN(parent, "non-root VICs are not supported")) return -EINVAL; @@ -416,18 +415,12 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) if (WARN_ON(!regs)) return -EIO; - irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); - if (WARN_ON(irq_base < 0)) - goto out_unmap; - - __vic_init(regs, irq_base, ~0, ~0, node); + /* + * Passing -1 as first IRQ makes the simple domain allocate descriptors + */ + __vic_init(regs, -1, ~0, ~0, node); return 0; - - out_unmap: - iounmap(regs); - - return -EIO; } #endif /* CONFIG OF */ diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig deleted file mode 100644 index c285a9d..0000000 --- a/arch/arm/configs/afeb9260_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_AFEB9260=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_EEPROM_AT24=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DEBUG=y -CONFIG_RTC_DRV_FM3130=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 67bc571..b175577 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -111,6 +111,7 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig index 505b376..0ea5d2c 100644 --- a/arch/arm/configs/at91sam9260_defconfig +++ b/arch/arm/configs/at91sam9260_defconfig @@ -75,7 +75,7 @@ CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig index 1e8712e..c87beb9 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -125,7 +125,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index d2050ca..c5212f4 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -133,7 +133,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_SDIO_UART=m diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index e1b0e80..3b18810 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -96,7 +96,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig deleted file mode 100644 index 1457971..0000000 --- a/arch/arm/configs/cam60_defconfig +++ /dev/null @@ -1,173 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_CAM60=y -CONFIG_ZBOOT_ROM_BSS=0x20004000 -CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_MISC=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_CFG80211=m -CONFIG_MAC80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_TEST=m -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 4b8a25d..1fd1d1d 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -218,7 +218,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig deleted file mode 100644 index 921480c..0000000 --- a/arch/arm/configs/cpu9260_defconfig +++ /dev/null @@ -1,116 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_CPU9260=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig deleted file mode 100644 index ea116cb..0000000 --- a/arch/arm/configs/cpu9g20_defconfig +++ /dev/null @@ -1,116 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_CPU9G20=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 67b5abb6..4ea7c95 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -144,7 +144,7 @@ CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_USB_CDC_COMPOSITE=m diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig index 69405a7..e16d3f3 100644 --- a/arch/arm/configs/h7202_defconfig +++ b/arch/arm/configs/h7202_defconfig @@ -34,8 +34,7 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_USB_GADGET=m CONFIG_USB_ZERO=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_EXT2_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index a691ef4..557dd29 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -136,7 +136,7 @@ CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_USB_GPIO_VBUS=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 00630e6..a07948a 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -240,7 +240,7 @@ CONFIG_USB_GADGET_S3C2410=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m CONFIG_MMC=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index dde2a1a..42eab9a 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -214,8 +214,7 @@ CONFIG_USB_TEST=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_FILE_STORAGE_TEST=y +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index 807d4e2..6a936c7 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -37,7 +37,6 @@ CONFIG_SPI_SIRF=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set CONFIG_USB_GADGET=y -CONFIG_USB_FILE_STORAGE=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig deleted file mode 100644 index 42d5db1..0000000 --- a/arch/arm/configs/qil-a9260_defconfig +++ /dev/null @@ -1,114 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_QIL_A9260=y -CONFIG_AT91_SLOW_CLOCK=y -CONFIG_AT91_EARLY_USART0=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS1,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_M41T94=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig deleted file mode 100644 index b4384af..0000000 --- a/arch/arm/configs/sam9_l9260_defconfig +++ /dev/null @@ -1,148 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_SAM9_L9260=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=25 -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_RAID_ATTRS=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1553=y -CONFIG_RTC_DRV_DS1742=y -CONFIG_RTC_DRV_M48T86=y -CONFIG_RTC_DRV_V3020=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_CODEPAGE_950=y -CONFIG_NLS_CODEPAGE_932=y -CONFIG_NLS_CODEPAGE_949=y -CONFIG_NLS_CODEPAGE_874=y -CONFIG_NLS_ISO8859_8=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index df77931..2e0419d 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -214,7 +214,7 @@ CONFIG_USB_GADGET_DUMMY_HCD=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_PXA=y diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig deleted file mode 100644 index 52f1488..0000000 --- a/arch/arm/configs/stamp9g20_defconfig +++ /dev/null @@ -1,128 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_TREE_PREEMPT_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y -CONFIG_MACH_PORTUXG20=y -CONFIG_MACH_STAMP9G20=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AT91_SLOW_CLOCK=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_KEXEC=y -CONFIG_CPU_IDLE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_SPIDEV=y -CONFIG_GPIO_SYSFS=y -CONFIG_W1=y -CONFIG_W1_MASTER_GPIO=y -CONFIG_W1_SLAVE_THERM=y -CONFIG_W1_SLAVE_DS2431=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=m -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index da68454..250625d 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -69,6 +69,8 @@ CONFIG_GPIO_TC3589X=y CONFIG_POWER_SUPPLY=y CONFIG_AB8500_BM=y CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig deleted file mode 100644 index a1501e1..0000000 --- a/arch/arm/configs/usb-a9260_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_MACH_USB_A9260=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 1d01ddd..d36e0d3 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -139,7 +139,7 @@ CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_GADGET=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 547a3c1..731d4f9 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -143,7 +143,7 @@ CONFIG_USB_GADGET=m CONFIG_USB_PXA27X=y CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=y diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index f70ae17..d3db398 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -16,7 +16,6 @@ generic-y += local64.h generic-y += msgbuf.h generic-y += param.h generic-y += parport.h -generic-y += percpu.h generic-y += poll.h generic-y += resource.h generic-y += sections.h @@ -31,5 +30,6 @@ generic-y += sockios.h generic-y += termbits.h generic-y += termios.h generic-y += timex.h +generic-y += trace_clock.h generic-y += types.h generic-y += unaligned.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 2ef9581..eb87200 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -250,6 +250,7 @@ * Beware, it also clobers LR. */ .macro safe_svcmode_maskall reg:req +#if __LINUX_ARM_ARCH__ >= 6 mrs \reg , cpsr mov lr , \reg and lr , lr , #MODE_MASK @@ -266,6 +267,13 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) __ERET 1: msr cpsr_c, \reg 2: +#else +/* + * workaround for possibly broken pre-v6 hardware + * (akita, Sharp Zaurus C-1000, PXA270-based) + */ + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, \reg +#endif .endm /* diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h index d797223..2744f06 100644 --- a/arch/arm/include/asm/cpu.h +++ b/arch/arm/include/asm/cpu.h @@ -15,6 +15,7 @@ struct cpuinfo_arm { struct cpu cpu; + u32 cpuid; #ifdef CONFIG_SMP unsigned int loops_per_jiffy; #endif diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cb47d28..a59dcb5 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -25,6 +25,19 @@ #define CPUID_EXT_ISAR4 "c2, 4" #define CPUID_EXT_ISAR5 "c2, 5" +#define MPIDR_SMP_BITMASK (0x3 << 30) +#define MPIDR_SMP_VALUE (0x2 << 30) + +#define MPIDR_MT_BITMASK (0x1 << 24) + +#define MPIDR_HWID_BITMASK 0xFFFFFF + +#define MPIDR_LEVEL_BITS 8 +#define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1) + +#define MPIDR_AFFINITY_LEVEL(mpidr, level) \ + ((mpidr >> (MPIDR_LEVEL_BITS * level)) & MPIDR_LEVEL_MASK) + extern unsigned int processor_id; #ifdef CONFIG_CPU_CP15 diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h index a0ada3e..f2e5cad 100644 --- a/arch/arm/include/asm/cti.h +++ b/arch/arm/include/asm/cti.h @@ -146,15 +146,7 @@ static inline void cti_irq_ack(struct cti *cti) */ static inline void cti_unlock(struct cti *cti) { - void __iomem *base = cti->base; - unsigned long val; - - val = __raw_readl(base + LOCKSTATUS); - - if (val & 1) { - val = LOCKCODE; - __raw_writel(val, base + LOCKACCESS); - } + __raw_writel(LOCKCODE, cti->base + LOCKACCESS); } /** @@ -166,14 +158,6 @@ static inline void cti_unlock(struct cti *cti) */ static inline void cti_lock(struct cti *cti) { - void __iomem *base = cti->base; - unsigned long val; - - val = __raw_readl(base + LOCKSTATUS); - - if (!(val & 1)) { - val = ~LOCKCODE; - __raw_writel(val, base + LOCKACCESS); - } + __raw_writel(~LOCKCODE, cti->base + LOCKACCESS); } #endif diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2300484..8ea02ac 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -211,13 +211,6 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, extern void __init init_dma_coherent_pool_size(unsigned long size); /* - * This can be called during boot to increase the size of the consistent - * DMA region above it's default value of 2MB. It must be called before the - * memory allocator is initialised, i.e. before any core_initcall. - */ -static inline void init_consistent_dma_size(unsigned long size) { } - -/* * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" * and utilize bounce buffers as needed to work around limited DMA windows. * diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index c4c87bc..3b2c40b 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -102,6 +102,10 @@ #define L2X0_ADDR_FILTER_EN 1 +#define L2X0_CTRL_EN 1 + +#define L2X0_WAY_SIZE_SHIFT 3 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask); #if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF) @@ -126,6 +130,7 @@ struct l2x0_regs { unsigned long filter_end; unsigned long prefetch_ctrl; unsigned long pwr_ctrl; + unsigned long ctrl; }; extern struct l2x0_regs l2x0_saved_regs; diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index e14af1a..2bebad3 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -47,7 +47,7 @@ struct device_node; struct pt_regs; -void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, +void __vic_init(void __iomem *base, int irq_start, u32 vic_sources, u32 resume_sources, struct device_node *node); void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); int vic_of_init(struct device_node *node, struct device_node *parent); diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index c190bc9..01169dd 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -98,12 +98,12 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_BASE_WCR 112 /* Accessor macros for the debug registers. */ -#define ARM_DBG_READ(M, OP2, VAL) do {\ - asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\ +#define ARM_DBG_READ(N, M, OP2, VAL) do {\ + asm volatile("mrc p14, 0, %0, " #N "," #M ", " #OP2 : "=r" (VAL));\ } while (0) -#define ARM_DBG_WRITE(M, OP2, VAL) do {\ - asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\ +#define ARM_DBG_WRITE(N, M, OP2, VAL) do {\ + asm volatile("mcr p14, 0, %0, " #N "," #M ", " #OP2 : : "r" (VAL));\ } while (0) struct notifier_block; diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 42f042e..652b560 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -374,7 +374,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #ifdef CONFIG_MMU #define ARCH_HAS_VALID_PHYS_ADDR_RANGE -extern int valid_phys_addr_range(unsigned long addr, size_t size); +extern int valid_phys_addr_range(phys_addr_t addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); extern int devmem_is_allowed(unsigned long pfn); #endif diff --git a/arch/arm/include/asm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h deleted file mode 100644 index ea6d063..0000000 --- a/arch/arm/include/asm/mach/serial_at91.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/include/asm/mach/serial_at91.h - * - * Based on serial_sa1100.h by Nicolas Pitre - * - * Copyright (C) 2002 ATMEL Rousset - * - * Low level machine dependent UART functions. - */ - -struct uart_port; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct atmel_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*enable_ms)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); - int (*open)(struct uart_port *); - void (*close)(struct uart_port *); -}; - -#if defined(CONFIG_SERIAL_ATMEL) -void atmel_register_uart_fns(struct atmel_port_fns *fns); -#else -#define atmel_register_uart_fns(fns) do { } while (0) -#endif - - diff --git a/arch/arm/include/asm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h deleted file mode 100644 index d09064b..0000000 --- a/arch/arm/include/asm/mach/serial_sa1100.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/mach/serial_sa1100.h - * - * Author: Nicolas Pitre - * - * Moved and changed lots, Russell King - * - * Low level machine dependent UART functions. - */ - -struct uart_port; -struct uart_info; - -/* - * This is a temporary structure for registering these - * functions; it is intended to be discarded after boot. - */ -struct sa1100_port_fns { - void (*set_mctrl)(struct uart_port *, u_int); - u_int (*get_mctrl)(struct uart_port *); - void (*pm)(struct uart_port *, u_int, u_int); - int (*set_wake)(struct uart_port *, u_int); -}; - -#ifdef CONFIG_SERIAL_SA1100 -void sa1100_register_uart_fns(struct sa1100_port_fns *fns); -void sa1100_register_uart(int idx, int port); -#else -#define sa1100_register_uart_fns(fns) do { } while (0) -#define sa1100_register_uart(idx,port) do { } while (0) -#endif diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h deleted file mode 100644 index ea297ac..0000000 --- a/arch/arm/include/asm/mach/udc_pxa2xx.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/include/asm/mach/udc_pxa2xx.h - * - * This supports machine-specific differences in how the PXA2xx - * USB Device Controller (UDC) is wired. - * - * It is set in linux/arch/arm/mach-pxa/<machine>.c or in - * linux/arch/mach-ixp4xx/<machine>.c and used in - * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c - */ - -struct pxa2xx_udc_mach_info { - int (*udc_is_connected)(void); /* do we see host? */ - void (*udc_command)(int cmd); -#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ -#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ - - /* Boards following the design guidelines in the developer's manual, - * with on-chip GPIOs not Lubbock's weird hardware, can have a sane - * VBUS IRQ and omit the methods above. Store the GPIO number - * here. Note that sometimes the signals go through inverters... - */ - bool gpio_pullup_inverted; - int gpio_pullup; /* high == pullup activated */ -}; - diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 1496565..9f77e78 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -5,18 +5,15 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID - unsigned int id; - raw_spinlock_t id_lock; + u64 id; #endif - unsigned int kvm_seq; + unsigned int vmalloc_seq; } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID -#define ASID(mm) ((mm)->context.id & 255) - -/* init_mm.context.id_lock should be initialized. */ -#define INIT_MM_CONTEXT(name) \ - .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock), +#define ASID_BITS 8 +#define ASID_MASK ((~0ULL) << ASID_BITS) +#define ASID(mm) ((mm)->context.id & ~ASID_MASK) #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 0306bc6..e1f644b 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -20,88 +20,12 @@ #include <asm/proc-fns.h> #include <asm-generic/mm_hooks.h> -void __check_kvm_seq(struct mm_struct *mm); +void __check_vmalloc_seq(struct mm_struct *mm); #ifdef CONFIG_CPU_HAS_ASID -/* - * On ARMv6, we have the following structure in the Context ID: - * - * 31 7 0 - * +-------------------------+-----------+ - * | process ID | ASID | - * +-------------------------+-----------+ - * | context ID | - * +-------------------------------------+ - * - * The ASID is used to tag entries in the CPU caches and TLBs. - * The context ID is used by debuggers and trace logic, and - * should be unique within all running processes. - */ -#define ASID_BITS 8 -#define ASID_MASK ((~0) << ASID_BITS) -#define ASID_FIRST_VERSION (1 << ASID_BITS) - -extern unsigned int cpu_last_asid; - -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm); -void __new_context(struct mm_struct *mm); -void cpu_set_reserved_ttbr0(void); - -static inline void switch_new_context(struct mm_struct *mm) -{ - unsigned long flags; - - __new_context(mm); - - local_irq_save(flags); - cpu_switch_mm(mm->pgd, mm); - local_irq_restore(flags); -} - -static inline void check_and_switch_context(struct mm_struct *mm, - struct task_struct *tsk) -{ - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); - - /* - * Required during context switch to avoid speculative page table - * walking with the wrong TTBR. - */ - cpu_set_reserved_ttbr0(); - - if (!((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) - /* - * The ASID is from the current generation, just switch to the - * new pgd. This condition is only true for calls from - * context_switch() and interrupts are already disabled. - */ - cpu_switch_mm(mm->pgd, mm); - else if (irqs_disabled()) - /* - * Defer the new ASID allocation until after the context - * switch critical region since __new_context() cannot be - * called with interrupts disabled (it sends IPIs). - */ - set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM); - else - /* - * That is a direct call to switch_mm() or activate_mm() with - * interrupts enabled and a new context. - */ - switch_new_context(mm); -} - -#define init_new_context(tsk,mm) (__init_new_context(tsk,mm),0) - -#define finish_arch_post_lock_switch \ - finish_arch_post_lock_switch -static inline void finish_arch_post_lock_switch(void) -{ - if (test_and_clear_thread_flag(TIF_SWITCH_MM)) - switch_new_context(current->mm); -} +void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); +#define init_new_context(tsk,mm) ({ mm->context.id = 0; }) #else /* !CONFIG_CPU_HAS_ASID */ @@ -110,8 +34,8 @@ static inline void finish_arch_post_lock_switch(void) static inline void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) { - if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq)) - __check_kvm_seq(mm); + if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)) + __check_vmalloc_seq(mm); if (irqs_disabled()) /* @@ -143,6 +67,7 @@ static inline void finish_arch_post_lock_switch(void) #endif /* CONFIG_CPU_HAS_ASID */ #define destroy_context(mm) do { } while(0) +#define activate_mm(prev,next) switch_mm(prev, next, NULL) /* * This is called when "tsk" is about to enter lazy TLB mode. @@ -186,6 +111,5 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, } #define deactivate_mm(tsk,mm) do { } while (0) -#define activate_mm(prev,next) switch_mm(prev, next, NULL) #endif diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h new file mode 100644 index 0000000..968c0a1 --- /dev/null +++ b/arch/arm/include/asm/percpu.h @@ -0,0 +1,45 @@ +/* + * Copyright 2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_ARM_PERCPU_H_ +#define _ASM_ARM_PERCPU_H_ + +/* + * Same as asm-generic/percpu.h, except that we store the per cpu offset + * in the TPIDRPRW. TPIDRPRW only exists on V6K and V7 + */ +#if defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6) +static inline void set_my_cpu_offset(unsigned long off) +{ + /* Set TPIDRPRW */ + asm volatile("mcr p15, 0, %0, c13, c0, 4" : : "r" (off) : "memory"); +} + +static inline unsigned long __my_cpu_offset(void) +{ + unsigned long off; + /* Read TPIDRPRW */ + asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory"); + return off; +} +#define __my_cpu_offset __my_cpu_offset() +#else +#define set_my_cpu_offset(x) do {} while(0) + +#endif /* CONFIG_SMP */ + +#include <asm-generic/percpu.h> + +#endif /* _ASM_ARM_PERCPU_H_ */ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 625cd62..7558775 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -21,4 +21,11 @@ #define C(_x) PERF_COUNT_HW_CACHE_##_x #define CACHE_OP_UNSUPPORTED 0xFFFF +#ifdef CONFIG_HW_PERF_EVENTS +struct pt_regs; +extern unsigned long perf_instruction_pointer(struct pt_regs *regs); +extern unsigned long perf_misc_flags(struct pt_regs *regs); +#define perf_misc_flags(regs) perf_misc_flags(regs) +#endif + #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 2317a71..f97ee02 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -115,6 +115,7 @@ * The PTE table pointer refers to the hardware entries; the "Linux" * entries are stored 1024 bytes below. */ +#define L_PTE_VALID (_AT(pteval_t, 1) << 0) /* Valid */ #define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) #define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) #define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ @@ -123,6 +124,7 @@ #define L_PTE_USER (_AT(pteval_t, 1) << 8) #define L_PTE_XN (_AT(pteval_t, 1) << 9) #define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ +#define L_PTE_NONE (_AT(pteval_t, 1) << 11) /* * These are the memory types, defined to be compatible with diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index b249035..a3f3792 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -67,7 +67,8 @@ * These bits overlap with the hardware bits but the naming is preserved for * consistency with the classic page table format. */ -#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Valid */ +#define L_PTE_VALID (_AT(pteval_t, 1) << 0) /* Valid */ +#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Present */ #define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ #define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */ #define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) /* AP[2] */ @@ -76,6 +77,7 @@ #define L_PTE_XN (_AT(pteval_t, 1) << 54) /* XN */ #define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) /* unused */ #define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */ +#define L_PTE_NONE (_AT(pteval_t, 1) << 57) /* PROT_NONE */ /* * To be used in assembly code with the upper page attributes. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 08c1231..9c82f988 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -73,7 +73,7 @@ extern pgprot_t pgprot_kernel; #define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b)) -#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY) +#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY | L_PTE_NONE) #define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN) #define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER) #define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) @@ -83,7 +83,7 @@ extern pgprot_t pgprot_kernel; #define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN) #define PAGE_KERNEL_EXEC pgprot_kernel -#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN) +#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE) #define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN) #define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER) #define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) @@ -203,9 +203,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) #define pte_special(pte) (0) -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) +#define pte_present_user(pte) (pte_present(pte) && (pte_val(pte) & L_PTE_USER)) #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) @@ -242,7 +240,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER; + const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER | L_PTE_NONE; pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); return pte; } diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index a26170d..f24edad 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -67,19 +67,19 @@ struct arm_pmu { cpumask_t active_irqs; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); - void (*enable)(struct hw_perf_event *evt, int idx); - void (*disable)(struct hw_perf_event *evt, int idx); + void (*enable)(struct perf_event *event); + void (*disable)(struct perf_event *event); int (*get_event_idx)(struct pmu_hw_events *hw_events, - struct hw_perf_event *hwc); + struct perf_event *event); int (*set_event_filter)(struct hw_perf_event *evt, struct perf_event_attr *attr); - u32 (*read_counter)(int idx); - void (*write_counter)(int idx, u32 val); - void (*start)(void); - void (*stop)(void); + u32 (*read_counter)(struct perf_event *event); + void (*write_counter)(struct perf_event *event, u32 val); + void (*start)(struct arm_pmu *); + void (*stop)(struct arm_pmu *); void (*reset)(void *); - int (*request_irq)(irq_handler_t handler); - void (*free_irq)(void); + int (*request_irq)(struct arm_pmu *, irq_handler_t handler); + void (*free_irq)(struct arm_pmu *); int (*map_event)(struct perf_event *event); int num_events; atomic_t active_events; @@ -93,15 +93,11 @@ struct arm_pmu { extern const struct dev_pm_ops armpmu_dev_pm_ops; -int armpmu_register(struct arm_pmu *armpmu, char *name, int type); +int armpmu_register(struct arm_pmu *armpmu, int type); -u64 armpmu_event_update(struct perf_event *event, - struct hw_perf_event *hwc, - int idx); +u64 armpmu_event_update(struct perf_event *event); -int armpmu_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, - int idx); +int armpmu_event_set_period(struct perf_event *event); int armpmu_map_event(struct perf_event *event, const unsigned (*event_map)[PERF_COUNT_HW_MAX], diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index aeae9c6..a219227 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -11,10 +11,13 @@ #ifndef __ASMARM_PROM_H #define __ASMARM_PROM_H +#define HAVE_ARCH_DEVTREE_FIXUPS + #ifdef CONFIG_OF extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); extern void arm_dt_memblock_reserve(void); +extern void __init arm_dt_init_cpu_maps(void); #else /* CONFIG_OF */ @@ -24,6 +27,7 @@ static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) } static inline void arm_dt_memblock_reserve(void) { } +static inline void arm_dt_init_cpu_maps(void) { } #endif /* CONFIG_OF */ #endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 2e3be16..d3a22be 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -79,6 +79,7 @@ extern void cpu_die(void); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask); struct smp_operations { #ifdef CONFIG_SMP diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index 558d6c8..aaa61b6 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -5,6 +5,9 @@ #ifndef __ASMARM_SMP_PLAT_H #define __ASMARM_SMP_PLAT_H +#include <linux/cpumask.h> +#include <linux/err.h> + #include <asm/cputype.h> /* @@ -48,5 +51,19 @@ static inline int cache_ops_need_broadcast(void) */ extern int __cpu_logical_map[]; #define cpu_logical_map(cpu) __cpu_logical_map[cpu] +/* + * Retrieve logical cpu index corresponding to a given MPIDR[23:0] + * - mpidr: MPIDR[23:0] to be used for the look-up + * + * Returns the cpu logical index or -EINVAL on look-up error + */ +static inline int get_logical_index(u32 mpidr) +{ + int cpu; + for (cpu = 0; cpu < nr_cpu_ids; cpu++) + if (cpu_logical_map(cpu) == mpidr) + return cpu; + return -EINVAL; +} #endif diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index 9fdded6..f1d96d4 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -7,6 +7,8 @@ #ifndef _ASM_ARM_SYSCALL_H #define _ASM_ARM_SYSCALL_H +#include <linux/audit.h> /* for AUDIT_ARCH_* */ +#include <linux/elf.h> /* for ELF_EM */ #include <linux/err.h> #include <linux/sched.h> @@ -95,4 +97,11 @@ static inline void syscall_set_arguments(struct task_struct *task, memcpy(®s->ARM_r0 + i, args, n * sizeof(args[0])); } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ + /* ARM tasks don't change audit architectures on the fly. */ + return AUDIT_ARCH_ARM; +} + #endif /* _ASM_ARM_SYSCALL_H */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 8477b4c..cddda1f 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -151,10 +151,10 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 #define TIF_SYSCALL_TRACEPOINT 10 +#define TIF_SECCOMP 11 /* seccomp syscall filtering active */ #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 -#define TIF_SECCOMP 21 #define TIF_SWITCH_MM 22 /* deferred switch_mm */ #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -163,11 +163,12 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) -#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/include/debug/vexpress.S b/arch/arm/include/debug/vexpress.S index 9f509f5..dc8e882 100644 --- a/arch/arm/include/debug/vexpress.S +++ b/arch/arm/include/debug/vexpress.S @@ -21,14 +21,17 @@ #if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT) .macro addruart,rp,rv,tmp + .arch armv7-a @ Make an educated guess regarding the memory map: - @ - the original A9 core tile, which has MPCore peripherals - @ located at 0x1e000000, should use UART at 0x10009000 + @ - the original A9 core tile (based on ARM Cortex-A9 r0p1) + @ should use UART at 0x10009000 @ - all other (RS1 complaint) tiles use UART mapped @ at 0x1c090000 - mrc p15, 4, \tmp, c15, c0, 0 - cmp \tmp, #0x1e000000 + mrc p15, 0, \rp, c0, c0, 0 + movw \rv, #0xc091 + movt \rv, #0x410f + cmp \rp, \rv @ Original memory map moveq \rp, #DEBUG_LL_UART_OFFSET diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index bee7f9d..70f1bde 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -19,8 +19,10 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/cputype.h> #include <asm/setup.h> #include <asm/page.h> +#include <asm/smp_plat.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -61,6 +63,108 @@ void __init arm_dt_memblock_reserve(void) } } +/* + * arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree + * and builds the cpu logical map array containing MPIDR values related to + * logical cpus + * + * Updates the cpu possible mask with the number of parsed cpu nodes + */ +void __init arm_dt_init_cpu_maps(void) +{ + /* + * Temp logical map is initialized with UINT_MAX values that are + * considered invalid logical map entries since the logical map must + * contain a list of MPIDR[23:0] values where MPIDR[31:24] must + * read as 0. + */ + struct device_node *cpu, *cpus; + u32 i, j, cpuidx = 1; + u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; + + u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = UINT_MAX }; + bool bootcpu_valid = false; + cpus = of_find_node_by_path("/cpus"); + + if (!cpus) + return; + + for_each_child_of_node(cpus, cpu) { + u32 hwid; + + pr_debug(" * %s...\n", cpu->full_name); + /* + * A device tree containing CPU nodes with missing "reg" + * properties is considered invalid to build the + * cpu_logical_map. + */ + if (of_property_read_u32(cpu, "reg", &hwid)) { + pr_debug(" * %s missing reg property\n", + cpu->full_name); + return; + } + + /* + * 8 MSBs must be set to 0 in the DT since the reg property + * defines the MPIDR[23:0]. + */ + if (hwid & ~MPIDR_HWID_BITMASK) + return; + + /* + * Duplicate MPIDRs are a recipe for disaster. + * Scan all initialized entries and check for + * duplicates. If any is found just bail out. + * temp values were initialized to UINT_MAX + * to avoid matching valid MPIDR[23:0] values. + */ + for (j = 0; j < cpuidx; j++) + if (WARN(tmp_map[j] == hwid, "Duplicate /cpu reg " + "properties in the DT\n")) + return; + + /* + * Build a stashed array of MPIDR values. Numbering scheme + * requires that if detected the boot CPU must be assigned + * logical id 0. Other CPUs get sequential indexes starting + * from 1. If a CPU node with a reg property matching the + * boot CPU MPIDR is detected, this is recorded so that the + * logical map built from DT is validated and can be used + * to override the map created in smp_setup_processor_id(). + */ + if (hwid == mpidr) { + i = 0; + bootcpu_valid = true; + } else { + i = cpuidx++; + } + + if (WARN(cpuidx > nr_cpu_ids, "DT /cpu %u nodes greater than " + "max cores %u, capping them\n", + cpuidx, nr_cpu_ids)) { + cpuidx = nr_cpu_ids; + break; + } + + tmp_map[i] = hwid; + } + + if (WARN(!bootcpu_valid, "DT missing boot CPU MPIDR[23:0], " + "fall back to default cpu_logical_map\n")) + return; + + /* + * Since the boot CPU node contains proper data, and all nodes have + * a reg property, the DT CPU list can be considered valid and the + * logical map created in smp_setup_processor_id() can be overridden + */ + for (i = 0; i < cpuidx; i++) { + set_cpu_possible(i, true); + cpu_logical_map(i) = tmp_map[i]; + pr_debug("cpu logical map 0x%x\n", cpu_logical_map(i)); + } +} + /** * setup_machine_fdt - Machine setup when an dtb was passed to the kernel * @dt_phys: physical address of dt blob diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 3471175..804153c 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -417,16 +417,6 @@ local_restart: ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing stmdb sp!, {r4, r5} @ push fifth and sixth args -#ifdef CONFIG_SECCOMP - tst r10, #_TIF_SECCOMP - beq 1f - mov r0, scno - bl __secure_computing - add r0, sp, #S_R0 + S_OFF @ pointer to regs - ldmia r0, {r0 - r3} @ have to reload r0 - r3 -1: -#endif - tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls? bne __sys_trace @@ -458,11 +448,13 @@ __sys_trace: ldmccia r1, {r0 - r6} @ have to reload r0 - r6 stmccia sp, {r4, r5} @ and update the stack args ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine - b 2b + cmp scno, #-1 @ skip the syscall? + bne 2b + add sp, sp, #S_OFF @ restore stack + b ret_slow_syscall __sys_trace_return: str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 - mov r1, scno mov r0, sp bl syscall_trace_exit b ret_slow_syscall diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 278cfc1..2c228a0 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -68,7 +68,7 @@ __after_proc_init: * CP15 system control register value returned in r0 from * the CPU init function. */ -#ifdef CONFIG_ALIGNMENT_TRAP +#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 orr r0, r0, #CR_A #else bic r0, r0, #CR_A diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 281bf33..5ff2e77 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -52,14 +52,14 @@ static u8 debug_arch; /* Maximum supported watchpoint length. */ static u8 max_watchpoint_len; -#define READ_WB_REG_CASE(OP2, M, VAL) \ - case ((OP2 << 4) + M): \ - ARM_DBG_READ(c ## M, OP2, VAL); \ +#define READ_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_READ(c0, c ## M, OP2, VAL); \ break -#define WRITE_WB_REG_CASE(OP2, M, VAL) \ - case ((OP2 << 4) + M): \ - ARM_DBG_WRITE(c ## M, OP2, VAL);\ +#define WRITE_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_WRITE(c0, c ## M, OP2, VAL); \ break #define GEN_READ_WB_REG_CASES(OP2, VAL) \ @@ -136,12 +136,12 @@ static u8 get_debug_arch(void) /* Do we implement the extended CPUID interface? */ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); + pr_warn_once("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); return ARM_DEBUG_ARCH_V6; } - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return (didr >> 16) & 0xf; } @@ -169,7 +169,7 @@ static int debug_exception_updates_fsr(void) static int get_num_wrp_resources(void) { u32 didr; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return ((didr >> 28) & 0xf) + 1; } @@ -177,7 +177,7 @@ static int get_num_wrp_resources(void) static int get_num_brp_resources(void) { u32 didr; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return ((didr >> 24) & 0xf) + 1; } @@ -228,19 +228,17 @@ static int get_num_brps(void) * be put into halting debug mode at any time by an external debugger * but there is nothing we can do to prevent that. */ -static int enable_monitor_mode(void) +static int monitor_mode_enabled(void) { u32 dscr; - int ret = 0; - - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); + return !!(dscr & ARM_DSCR_MDBGEN); +} - /* Ensure that halting mode is disabled. */ - if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, - "halting debug mode enabled. Unable to access hardware resources.\n")) { - ret = -EPERM; - goto out; - } +static int enable_monitor_mode(void) +{ + u32 dscr; + ARM_DBG_READ(c0, c1, 0, dscr); /* If monitor mode is already enabled, just return. */ if (dscr & ARM_DSCR_MDBGEN) @@ -250,24 +248,27 @@ static int enable_monitor_mode(void) switch (get_debug_arch()) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: - ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); + ARM_DBG_WRITE(c0, c1, 0, (dscr | ARM_DSCR_MDBGEN)); break; case ARM_DEBUG_ARCH_V7_ECP14: case ARM_DEBUG_ARCH_V7_1: - ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN)); + ARM_DBG_WRITE(c0, c2, 2, (dscr | ARM_DSCR_MDBGEN)); + isb(); break; default: - ret = -ENODEV; - goto out; + return -ENODEV; } /* Check that the write made it through. */ - ARM_DBG_READ(c1, 0, dscr); - if (!(dscr & ARM_DSCR_MDBGEN)) - ret = -EPERM; + ARM_DBG_READ(c0, c1, 0, dscr); + if (!(dscr & ARM_DSCR_MDBGEN)) { + pr_warn_once("Failed to enable monitor mode on CPU %d.\n", + smp_processor_id()); + return -EPERM; + } out: - return ret; + return 0; } int hw_breakpoint_slots(int type) @@ -328,14 +329,9 @@ int arch_install_hw_breakpoint(struct perf_event *bp) { struct arch_hw_breakpoint *info = counter_arch_bp(bp); struct perf_event **slot, **slots; - int i, max_slots, ctrl_base, val_base, ret = 0; + int i, max_slots, ctrl_base, val_base; u32 addr, ctrl; - /* Ensure that we are in monitor mode and halting mode is disabled. */ - ret = enable_monitor_mode(); - if (ret) - goto out; - addr = info->address; ctrl = encode_ctrl_reg(info->ctrl) | 0x1; @@ -362,9 +358,9 @@ int arch_install_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) { - ret = -EBUSY; - goto out; + if (i == max_slots) { + pr_warning("Can't find any breakpoint slot\n"); + return -EBUSY; } /* Override the breakpoint data with the step data. */ @@ -383,9 +379,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp) /* Setup the control register. */ write_wb_reg(ctrl_base + i, ctrl); - -out: - return ret; + return 0; } void arch_uninstall_hw_breakpoint(struct perf_event *bp) @@ -416,8 +410,10 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) } } - if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) + if (i == max_slots) { + pr_warning("Can't find any breakpoint slot\n"); return; + } /* Ensure that we disable the mismatch breakpoint. */ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE && @@ -596,6 +592,10 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) int ret = 0; u32 offset, alignment_mask = 0x3; + /* Ensure that we are in monitor debug mode. */ + if (!monitor_mode_enabled()) + return -ENODEV; + /* Build the arch_hw_breakpoint. */ ret = arch_build_bp_info(bp); if (ret) @@ -858,7 +858,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, local_irq_enable(); /* We only handle watchpoints and hardware breakpoints. */ - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); /* Perform perf callbacks. */ switch (ARM_DSCR_MOE(dscr)) { @@ -906,7 +906,7 @@ static struct undef_hook debug_reg_hook = { static void reset_ctrl_regs(void *unused) { int i, raw_num_brps, err = 0, cpu = smp_processor_id(); - u32 dbg_power; + u32 val; /* * v7 debug contains save and restore registers so that debug state @@ -919,23 +919,30 @@ static void reset_ctrl_regs(void *unused) switch (debug_arch) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: - /* ARMv6 cores just need to reset the registers. */ - goto reset_regs; + /* ARMv6 cores clear the registers out of reset. */ + goto out_mdbgen; case ARM_DEBUG_ARCH_V7_ECP14: /* * Ensure sticky power-down is clear (i.e. debug logic is * powered up). */ - asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power)); - if ((dbg_power & 0x1) == 0) + ARM_DBG_READ(c1, c5, 4, val); + if ((val & 0x1) == 0) err = -EPERM; + + /* + * Check whether we implement OS save and restore. + */ + ARM_DBG_READ(c1, c1, 4, val); + if ((val & 0x9) == 0) + goto clear_vcr; break; case ARM_DEBUG_ARCH_V7_1: /* * Ensure the OS double lock is clear. */ - asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power)); - if ((dbg_power & 0x1) == 1) + ARM_DBG_READ(c1, c3, 4, val); + if ((val & 0x1) == 1) err = -EPERM; break; } @@ -947,24 +954,29 @@ static void reset_ctrl_regs(void *unused) } /* - * Unconditionally clear the lock by writing a value + * Unconditionally clear the OS lock by writing a value * other than 0xC5ACCE55 to the access register. */ - asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); + ARM_DBG_WRITE(c1, c0, 4, 0); isb(); /* * Clear any configured vector-catch events before * enabling monitor mode. */ - asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); +clear_vcr: + ARM_DBG_WRITE(c0, c7, 0, 0); isb(); -reset_regs: - if (enable_monitor_mode()) + if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { + pr_warning("CPU %d failed to disable vector catch\n", cpu); return; + } - /* We must also reset any reserved registers. */ + /* + * The control/value register pairs are UNKNOWN out of reset so + * clear them to avoid spurious debug events. + */ raw_num_brps = get_num_brp_resources(); for (i = 0; i < raw_num_brps; ++i) { write_wb_reg(ARM_BASE_BCR + i, 0UL); @@ -975,6 +987,19 @@ reset_regs: write_wb_reg(ARM_BASE_WCR + i, 0UL); write_wb_reg(ARM_BASE_WVR + i, 0UL); } + + if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { + pr_warning("CPU %d failed to clear debug register pairs\n", cpu); + return; + } + + /* + * Have a crack at enabling monitor mode. We don't actually need + * it yet, but reporting an error early is useful if it fails. + */ +out_mdbgen: + if (enable_monitor_mode()) + cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); } static int __cpuinit dbg_reset_notify(struct notifier_block *self, @@ -992,8 +1017,6 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = { static int __init arch_hw_breakpoint_init(void) { - u32 dscr; - debug_arch = get_debug_arch(); if (!debug_arch_supported()) { @@ -1028,17 +1051,10 @@ static int __init arch_hw_breakpoint_init(void) core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " : "", core_num_wrps); - ARM_DBG_READ(c1, 0, dscr); - if (dscr & ARM_DSCR_HDBGEN) { - max_watchpoint_len = 4; - pr_warning("halting debug mode enabled. Assuming maximum watchpoint size of %u bytes.\n", - max_watchpoint_len); - } else { - /* Work out the maximum supported watchpoint length. */ - max_watchpoint_len = get_max_wp_len(); - pr_info("maximum watchpoint size is %u bytes.\n", - max_watchpoint_len); - } + /* Work out the maximum supported watchpoint length. */ + max_watchpoint_len = get_max_wp_len(); + pr_info("maximum watchpoint size is %u bytes.\n", + max_watchpoint_len); /* Register debug fault handler. */ hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP, diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 53c0304..f9e8657 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -86,12 +86,10 @@ armpmu_map_event(struct perf_event *event, return -ENOENT; } -int -armpmu_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) +int armpmu_event_set_period(struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; s64 left = local64_read(&hwc->period_left); s64 period = hwc->sample_period; int ret = 0; @@ -119,24 +117,22 @@ armpmu_event_set_period(struct perf_event *event, local64_set(&hwc->prev_count, (u64)-left); - armpmu->write_counter(idx, (u64)(-left) & 0xffffffff); + armpmu->write_counter(event, (u64)(-left) & 0xffffffff); perf_event_update_userpage(event); return ret; } -u64 -armpmu_event_update(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) +u64 armpmu_event_update(struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; u64 delta, prev_raw_count, new_raw_count; again: prev_raw_count = local64_read(&hwc->prev_count); - new_raw_count = armpmu->read_counter(idx); + new_raw_count = armpmu->read_counter(event); if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, new_raw_count) != prev_raw_count) @@ -159,7 +155,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx); + armpmu_event_update(event); } static void @@ -173,14 +169,13 @@ armpmu_stop(struct perf_event *event, int flags) * PERF_EF_UPDATE, see comments in armpmu_start(). */ if (!(hwc->state & PERF_HES_STOPPED)) { - armpmu->disable(hwc, hwc->idx); - armpmu_event_update(event, hwc, hwc->idx); + armpmu->disable(event); + armpmu_event_update(event); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } -static void -armpmu_start(struct perf_event *event, int flags) +static void armpmu_start(struct perf_event *event, int flags) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; @@ -200,8 +195,8 @@ armpmu_start(struct perf_event *event, int flags) * get an interrupt too soon or *way* too late if the overflow has * happened since disabling. */ - armpmu_event_set_period(event, hwc, hwc->idx); - armpmu->enable(hwc, hwc->idx); + armpmu_event_set_period(event); + armpmu->enable(event); } static void @@ -233,7 +228,7 @@ armpmu_add(struct perf_event *event, int flags) perf_pmu_disable(event->pmu); /* If we don't have a space for the counter then finish early. */ - idx = armpmu->get_event_idx(hw_events, hwc); + idx = armpmu->get_event_idx(hw_events, event); if (idx < 0) { err = idx; goto out; @@ -244,7 +239,7 @@ armpmu_add(struct perf_event *event, int flags) * sure it is disabled. */ event->hw.idx = idx; - armpmu->disable(hwc, idx); + armpmu->disable(event); hw_events->events[idx] = event; hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; @@ -264,13 +259,12 @@ validate_event(struct pmu_hw_events *hw_events, struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct hw_perf_event fake_event = event->hw; struct pmu *leader_pmu = event->group_leader->pmu; if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF) return 1; - return armpmu->get_event_idx(hw_events, &fake_event) >= 0; + return armpmu->get_event_idx(hw_events, event) >= 0; } static int @@ -316,7 +310,7 @@ static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) static void armpmu_release_hardware(struct arm_pmu *armpmu) { - armpmu->free_irq(); + armpmu->free_irq(armpmu); pm_runtime_put_sync(&armpmu->plat_device->dev); } @@ -330,7 +324,7 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu) return -ENODEV; pm_runtime_get_sync(&pmu_device->dev); - err = armpmu->request_irq(armpmu_dispatch_irq); + err = armpmu->request_irq(armpmu, armpmu_dispatch_irq); if (err) { armpmu_release_hardware(armpmu); return err; @@ -465,13 +459,13 @@ static void armpmu_enable(struct pmu *pmu) int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events); if (enabled) - armpmu->start(); + armpmu->start(armpmu); } static void armpmu_disable(struct pmu *pmu) { struct arm_pmu *armpmu = to_arm_pmu(pmu); - armpmu->stop(); + armpmu->stop(armpmu); } #ifdef CONFIG_PM_RUNTIME @@ -517,12 +511,13 @@ static void __init armpmu_init(struct arm_pmu *armpmu) }; } -int armpmu_register(struct arm_pmu *armpmu, char *name, int type) +int armpmu_register(struct arm_pmu *armpmu, int type) { armpmu_init(armpmu); + pm_runtime_enable(&armpmu->plat_device->dev); pr_info("enabled with %s PMU driver, %d counters available\n", armpmu->name, armpmu->num_events); - return perf_pmu_register(&armpmu->pmu, name, type); + return perf_pmu_register(&armpmu->pmu, armpmu->name, type); } /* @@ -576,6 +571,10 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { struct frame_tail __user *tail; + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + /* We don't support guest os callchain now */ + return; + } tail = (struct frame_tail __user *)regs->ARM_fp - 1; @@ -603,9 +602,41 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) { struct stackframe fr; + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + /* We don't support guest os callchain now */ + return; + } + fr.fp = regs->ARM_fp; fr.sp = regs->ARM_sp; fr.lr = regs->ARM_lr; fr.pc = regs->ARM_pc; walk_stackframe(&fr, callchain_trace, entry); } + +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) + return perf_guest_cbs->get_guest_ip(); + + return instruction_pointer(regs); +} + +unsigned long perf_misc_flags(struct pt_regs *regs) +{ + int misc = 0; + + if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { + if (perf_guest_cbs->is_user_mode()) + misc |= PERF_RECORD_MISC_GUEST_USER; + else + misc |= PERF_RECORD_MISC_GUEST_KERNEL; + } else { + if (user_mode(regs)) + misc |= PERF_RECORD_MISC_USER; + else + misc |= PERF_RECORD_MISC_KERNEL; + } + + return misc; +} diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 8d7d8d4..9a4f630 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <asm/cputype.h> @@ -45,7 +46,7 @@ const char *perf_pmu_name(void) if (!cpu_pmu) return NULL; - return cpu_pmu->pmu.name; + return cpu_pmu->name; } EXPORT_SYMBOL_GPL(perf_pmu_name); @@ -70,7 +71,7 @@ static struct pmu_hw_events *cpu_pmu_get_cpu_events(void) return &__get_cpu_var(cpu_hw_events); } -static void cpu_pmu_free_irq(void) +static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) { int i, irq, irqs; struct platform_device *pmu_device = cpu_pmu->plat_device; @@ -86,7 +87,7 @@ static void cpu_pmu_free_irq(void) } } -static int cpu_pmu_request_irq(irq_handler_t handler) +static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) { int i, err, irq, irqs; struct platform_device *pmu_device = cpu_pmu->plat_device; @@ -147,7 +148,7 @@ static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu) /* Ensure the PMU has sane values out of reset. */ if (cpu_pmu && cpu_pmu->reset) - on_each_cpu(cpu_pmu->reset, NULL, 1); + on_each_cpu(cpu_pmu->reset, cpu_pmu, 1); } /* @@ -163,7 +164,9 @@ static int __cpuinit cpu_pmu_notify(struct notifier_block *b, return NOTIFY_DONE; if (cpu_pmu && cpu_pmu->reset) - cpu_pmu->reset(NULL); + cpu_pmu->reset(cpu_pmu); + else + return NOTIFY_DONE; return NOTIFY_OK; } @@ -195,13 +198,13 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = { /* * CPU PMU identification and probing. */ -static struct arm_pmu *__devinit probe_current_pmu(void) +static int __devinit probe_current_pmu(struct arm_pmu *pmu) { - struct arm_pmu *pmu = NULL; int cpu = get_cpu(); unsigned long cpuid = read_cpuid_id(); unsigned long implementor = (cpuid & 0xFF000000) >> 24; unsigned long part_number = (cpuid & 0xFFF0); + int ret = -ENODEV; pr_info("probing PMU on CPU %d\n", cpu); @@ -211,25 +214,25 @@ static struct arm_pmu *__devinit probe_current_pmu(void) case 0xB360: /* ARM1136 */ case 0xB560: /* ARM1156 */ case 0xB760: /* ARM1176 */ - pmu = armv6pmu_init(); + ret = armv6pmu_init(pmu); break; case 0xB020: /* ARM11mpcore */ - pmu = armv6mpcore_pmu_init(); + ret = armv6mpcore_pmu_init(pmu); break; case 0xC080: /* Cortex-A8 */ - pmu = armv7_a8_pmu_init(); + ret = armv7_a8_pmu_init(pmu); break; case 0xC090: /* Cortex-A9 */ - pmu = armv7_a9_pmu_init(); + ret = armv7_a9_pmu_init(pmu); break; case 0xC050: /* Cortex-A5 */ - pmu = armv7_a5_pmu_init(); + ret = armv7_a5_pmu_init(pmu); break; case 0xC0F0: /* Cortex-A15 */ - pmu = armv7_a15_pmu_init(); + ret = armv7_a15_pmu_init(pmu); break; case 0xC070: /* Cortex-A7 */ - pmu = armv7_a7_pmu_init(); + ret = armv7_a7_pmu_init(pmu); break; } /* Intel CPUs [xscale]. */ @@ -237,43 +240,54 @@ static struct arm_pmu *__devinit probe_current_pmu(void) part_number = (cpuid >> 13) & 0x7; switch (part_number) { case 1: - pmu = xscale1pmu_init(); + ret = xscale1pmu_init(pmu); break; case 2: - pmu = xscale2pmu_init(); + ret = xscale2pmu_init(pmu); break; } } put_cpu(); - return pmu; + return ret; } static int __devinit cpu_pmu_device_probe(struct platform_device *pdev) { const struct of_device_id *of_id; - struct arm_pmu *(*init_fn)(void); + int (*init_fn)(struct arm_pmu *); struct device_node *node = pdev->dev.of_node; + struct arm_pmu *pmu; + int ret = -ENODEV; if (cpu_pmu) { pr_info("attempt to register multiple PMU devices!"); return -ENOSPC; } + pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL); + if (!pmu) { + pr_info("failed to allocate PMU device!"); + return -ENOMEM; + } + if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { init_fn = of_id->data; - cpu_pmu = init_fn(); + ret = init_fn(pmu); } else { - cpu_pmu = probe_current_pmu(); + ret = probe_current_pmu(pmu); } - if (!cpu_pmu) - return -ENODEV; + if (ret) { + pr_info("failed to register PMU devices!"); + kfree(pmu); + return ret; + } + cpu_pmu = pmu; cpu_pmu->plat_device = pdev; cpu_pmu_init(cpu_pmu); - register_cpu_notifier(&cpu_pmu_hotplug_notifier); - armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); + armpmu_register(cpu_pmu, PERF_TYPE_RAW); return 0; } @@ -290,6 +304,16 @@ static struct platform_driver cpu_pmu_driver = { static int __init register_pmu_driver(void) { - return platform_driver_register(&cpu_pmu_driver); + int err; + + err = register_cpu_notifier(&cpu_pmu_hotplug_notifier); + if (err) + return err; + + err = platform_driver_register(&cpu_pmu_driver); + if (err) + unregister_cpu_notifier(&cpu_pmu_hotplug_notifier); + + return err; } device_initcall(register_pmu_driver); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 6ccc079..f3e22ff 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -401,9 +401,10 @@ armv6_pmcr_counter_has_overflowed(unsigned long pmcr, return ret; } -static inline u32 -armv6pmu_read_counter(int counter) +static inline u32 armv6pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; unsigned long value = 0; if (ARMV6_CYCLE_COUNTER == counter) @@ -418,10 +419,11 @@ armv6pmu_read_counter(int counter) return value; } -static inline void -armv6pmu_write_counter(int counter, - u32 value) +static inline void armv6pmu_write_counter(struct perf_event *event, u32 value) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + if (ARMV6_CYCLE_COUNTER == counter) asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); else if (ARMV6_COUNTER0 == counter) @@ -432,12 +434,13 @@ armv6pmu_write_counter(int counter, WARN_ONCE(1, "invalid counter number (%d)\n", counter); } -static void -armv6pmu_enable_event(struct hw_perf_event *hwc, - int idx) +static void armv6pmu_enable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = 0; @@ -473,7 +476,8 @@ armv6pmu_handle_irq(int irq_num, { unsigned long pmcr = armv6_pmcr_read(); struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -489,7 +493,6 @@ armv6pmu_handle_irq(int irq_num, */ armv6_pmcr_write(pmcr); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -506,13 +509,13 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } /* @@ -527,8 +530,7 @@ armv6pmu_handle_irq(int irq_num, return IRQ_HANDLED; } -static void -armv6pmu_start(void) +static void armv6pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -540,8 +542,7 @@ armv6pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -armv6pmu_stop(void) +static void armv6pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -555,10 +556,11 @@ armv6pmu_stop(void) static int armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; /* Always place a cycle counter into the cycle counter. */ - if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { + if (ARMV6_PERFCTR_CPU_CYCLES == hwc->config_base) { if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) return -EAGAIN; @@ -579,12 +581,13 @@ armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, } } -static void -armv6pmu_disable_event(struct hw_perf_event *hwc, - int idx) +static void armv6pmu_disable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -613,12 +616,13 @@ armv6pmu_disable_event(struct hw_perf_event *hwc, raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, - int idx) +static void armv6mpcore_pmu_disable_event(struct perf_event *event) { unsigned long val, mask, flags, evt = 0; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; if (ARMV6_CYCLE_COUNTER == idx) { mask = ARMV6_PMCR_CCOUNT_IEN; @@ -649,24 +653,22 @@ static int armv6_map_event(struct perf_event *event) &armv6_perf_cache_map, 0xFF); } -static struct arm_pmu armv6pmu = { - .name = "v6", - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6pmu_disable_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .map_event = armv6_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit armv6pmu_init(void) +static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu) { - return &armv6pmu; + cpu_pmu->name = "v6"; + cpu_pmu->handle_irq = armv6pmu_handle_irq; + cpu_pmu->enable = armv6pmu_enable_event; + cpu_pmu->disable = armv6pmu_disable_event; + cpu_pmu->read_counter = armv6pmu_read_counter; + cpu_pmu->write_counter = armv6pmu_write_counter; + cpu_pmu->get_event_idx = armv6pmu_get_event_idx; + cpu_pmu->start = armv6pmu_start; + cpu_pmu->stop = armv6pmu_stop; + cpu_pmu->map_event = armv6_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } /* @@ -683,33 +685,31 @@ static int armv6mpcore_map_event(struct perf_event *event) &armv6mpcore_perf_cache_map, 0xFF); } -static struct arm_pmu armv6mpcore_pmu = { - .name = "v6mpcore", - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6mpcore_pmu_disable_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .map_event = armv6mpcore_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) +static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { - return &armv6mpcore_pmu; + cpu_pmu->name = "v6mpcore"; + cpu_pmu->handle_irq = armv6pmu_handle_irq; + cpu_pmu->enable = armv6pmu_enable_event; + cpu_pmu->disable = armv6mpcore_pmu_disable_event; + cpu_pmu->read_counter = armv6pmu_read_counter; + cpu_pmu->write_counter = armv6pmu_write_counter; + cpu_pmu->get_event_idx = armv6pmu_get_event_idx; + cpu_pmu->start = armv6pmu_start; + cpu_pmu->stop = armv6pmu_stop; + cpu_pmu->map_event = armv6mpcore_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #else -static struct arm_pmu *__devinit armv6pmu_init(void) +static int armv6pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) +static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index bd4b090..7d0cce8 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -18,8 +18,6 @@ #ifdef CONFIG_CPU_V7 -static struct arm_pmu armv7pmu; - /* * Common ARMv7 event types * @@ -738,7 +736,8 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] */ #define ARMV7_IDX_CYCLE_COUNTER 0 #define ARMV7_IDX_COUNTER0 1 -#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) +#define ARMV7_IDX_COUNTER_LAST(cpu_pmu) \ + (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1) #define ARMV7_MAX_COUNTERS 32 #define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1) @@ -804,49 +803,34 @@ static inline int armv7_pmnc_has_overflowed(u32 pmnc) return pmnc & ARMV7_OVERFLOWED_MASK; } -static inline int armv7_pmnc_counter_valid(int idx) +static inline int armv7_pmnc_counter_valid(struct arm_pmu *cpu_pmu, int idx) { - return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST; + return idx >= ARMV7_IDX_CYCLE_COUNTER && + idx <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); } static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx) { - int ret = 0; - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u checking wrong counter %d overflow status\n", - smp_processor_id(), idx); - } else { - counter = ARMV7_IDX_TO_COUNTER(idx); - ret = pmnc & BIT(counter); - } - - return ret; + return pmnc & BIT(ARMV7_IDX_TO_COUNTER(idx)); } static inline int armv7_pmnc_select_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u selecting wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter)); isb(); return idx; } -static inline u32 armv7pmu_read_counter(int idx) +static inline u32 armv7pmu_read_counter(struct perf_event *event) { + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; u32 value = 0; - if (!armv7_pmnc_counter_valid(idx)) + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) pr_err("CPU%u reading wrong counter %d\n", smp_processor_id(), idx); else if (idx == ARMV7_IDX_CYCLE_COUNTER) @@ -857,9 +841,13 @@ static inline u32 armv7pmu_read_counter(int idx) return value; } -static inline void armv7pmu_write_counter(int idx, u32 value) +static inline void armv7pmu_write_counter(struct perf_event *event, u32 value) { - if (!armv7_pmnc_counter_valid(idx)) + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) pr_err("CPU%u writing wrong counter %d\n", smp_processor_id(), idx); else if (idx == ARMV7_IDX_CYCLE_COUNTER) @@ -878,60 +866,28 @@ static inline void armv7_pmnc_write_evtsel(int idx, u32 val) static inline int armv7_pmnc_enable_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u enabling wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_disable_counter(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u disabling wrong PMNC counter %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_enable_intens(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter))); return idx; } static inline int armv7_pmnc_disable_intens(int idx) { - u32 counter; - - if (!armv7_pmnc_counter_valid(idx)) { - pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", - smp_processor_id(), idx); - return -EINVAL; - } - - counter = ARMV7_IDX_TO_COUNTER(idx); + u32 counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); isb(); /* Clear the overflow flag in case an interrupt is pending. */ @@ -956,7 +912,7 @@ static inline u32 armv7_pmnc_getreset_flags(void) } #ifdef DEBUG -static void armv7_pmnc_dump_regs(void) +static void armv7_pmnc_dump_regs(struct arm_pmu *cpu_pmu) { u32 val; unsigned int cnt; @@ -981,7 +937,8 @@ static void armv7_pmnc_dump_regs(void) asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); printk(KERN_INFO "CCNT =0x%08x\n", val); - for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) { + for (cnt = ARMV7_IDX_COUNTER0; + cnt <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); cnt++) { armv7_pmnc_select_counter(cnt); asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); printk(KERN_INFO "CNT[%d] count =0x%08x\n", @@ -993,10 +950,19 @@ static void armv7_pmnc_dump_regs(void) } #endif -static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void armv7pmu_enable_event(struct perf_event *event) { unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { + pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return; + } /* * Enable counter and interrupt, and set the counter to count @@ -1014,7 +980,7 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) * We only need to set the event for the cycle counter if we * have the ability to perform event filtering. */ - if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) + if (cpu_pmu->set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER) armv7_pmnc_write_evtsel(idx, hwc->config_base); /* @@ -1030,10 +996,19 @@ static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void armv7pmu_disable_event(struct perf_event *event) { unsigned long flags; + struct hw_perf_event *hwc = &event->hw; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; + + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) { + pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n", + smp_processor_id(), idx); + return; + } /* * Disable counter and interrupt @@ -1057,7 +1032,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) { u32 pmnc; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -1077,7 +1053,6 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) */ regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -1094,13 +1069,13 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } /* @@ -1115,7 +1090,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void armv7pmu_start(void) +static void armv7pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -1126,7 +1101,7 @@ static void armv7pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void armv7pmu_stop(void) +static void armv7pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -1138,10 +1113,12 @@ static void armv7pmu_stop(void) } static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { int idx; - unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + unsigned long evtype = hwc->config_base & ARMV7_EVTYPE_EVENT; /* Always place a cycle counter into the cycle counter. */ if (evtype == ARMV7_PERFCTR_CPU_CYCLES) { @@ -1192,11 +1169,14 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event, static void armv7pmu_reset(void *info) { + struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; u32 idx, nb_cnt = cpu_pmu->num_events; /* The counter and interrupt enable registers are unknown at reset. */ - for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) - armv7pmu_disable_event(NULL, idx); + for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) { + armv7_pmnc_disable_counter(idx); + armv7_pmnc_disable_intens(idx); + } /* Initialize & Reset PMNC: C and P bits */ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); @@ -1232,17 +1212,18 @@ static int armv7_a7_map_event(struct perf_event *event) &armv7_a7_perf_cache_map, 0xFF); } -static struct arm_pmu armv7pmu = { - .handle_irq = armv7pmu_handle_irq, - .enable = armv7pmu_enable_event, - .disable = armv7pmu_disable_event, - .read_counter = armv7pmu_read_counter, - .write_counter = armv7pmu_write_counter, - .get_event_idx = armv7pmu_get_event_idx, - .start = armv7pmu_start, - .stop = armv7pmu_stop, - .reset = armv7pmu_reset, - .max_period = (1LLU << 32) - 1, +static void armv7pmu_init(struct arm_pmu *cpu_pmu) +{ + cpu_pmu->handle_irq = armv7pmu_handle_irq; + cpu_pmu->enable = armv7pmu_enable_event; + cpu_pmu->disable = armv7pmu_disable_event; + cpu_pmu->read_counter = armv7pmu_read_counter; + cpu_pmu->write_counter = armv7pmu_write_counter; + cpu_pmu->get_event_idx = armv7pmu_get_event_idx; + cpu_pmu->start = armv7pmu_start; + cpu_pmu->stop = armv7pmu_stop; + cpu_pmu->reset = armv7pmu_reset; + cpu_pmu->max_period = (1LLU << 32) - 1; }; static u32 __devinit armv7_read_num_pmnc_events(void) @@ -1256,70 +1237,75 @@ static u32 __devinit armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static struct arm_pmu *__devinit armv7_a8_pmu_init(void) +static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A8"; - armv7pmu.map_event = armv7_a8_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A8"; + cpu_pmu->map_event = armv7_a8_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a9_pmu_init(void) +static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A9"; - armv7pmu.map_event = armv7_a9_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A9"; + cpu_pmu->map_event = armv7_a9_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a5_pmu_init(void) +static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A5"; - armv7pmu.map_event = armv7_a5_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A5"; + cpu_pmu->map_event = armv7_a5_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + return 0; } -static struct arm_pmu *__devinit armv7_a15_pmu_init(void) +static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A15"; - armv7pmu.map_event = armv7_a15_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - armv7pmu.set_event_filter = armv7pmu_set_event_filter; - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A15"; + cpu_pmu->map_event = armv7_a15_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + return 0; } -static struct arm_pmu *__devinit armv7_a7_pmu_init(void) +static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { - armv7pmu.name = "ARMv7 Cortex-A7"; - armv7pmu.map_event = armv7_a7_map_event; - armv7pmu.num_events = armv7_read_num_pmnc_events(); - armv7pmu.set_event_filter = armv7pmu_set_event_filter; - return &armv7pmu; + armv7pmu_init(cpu_pmu); + cpu_pmu->name = "ARMv7 Cortex-A7"; + cpu_pmu->map_event = armv7_a7_map_event; + cpu_pmu->num_events = armv7_read_num_pmnc_events(); + cpu_pmu->set_event_filter = armv7pmu_set_event_filter; + return 0; } #else -static struct arm_pmu *__devinit armv7_a8_pmu_init(void) +static inline int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a9_pmu_init(void) +static inline int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a5_pmu_init(void) +static inline int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a15_pmu_init(void) +static inline int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit armv7_a7_pmu_init(void) +static inline int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 426e19f..0c8265e 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -224,7 +224,8 @@ xscale1pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -248,7 +249,6 @@ xscale1pmu_handle_irq(int irq_num, void *dev) regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -260,13 +260,13 @@ xscale1pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } irq_work_run(); @@ -280,11 +280,13 @@ xscale1pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void -xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void xscale1pmu_enable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -314,11 +316,13 @@ xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void xscale1pmu_disable_event(struct perf_event *event) { unsigned long val, mask, evt, flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; switch (idx) { case XSCALE_CYCLE_COUNTER: @@ -348,9 +352,10 @@ xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) static int xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { - if (XSCALE_PERFCTR_CCNT == event->config_base) { + struct hw_perf_event *hwc = &event->hw; + if (XSCALE_PERFCTR_CCNT == hwc->config_base) { if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) return -EAGAIN; @@ -366,8 +371,7 @@ xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc, } } -static void -xscale1pmu_start(void) +static void xscale1pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -379,8 +383,7 @@ xscale1pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale1pmu_stop(void) +static void xscale1pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -392,9 +395,10 @@ xscale1pmu_stop(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static inline u32 -xscale1pmu_read_counter(int counter) +static inline u32 xscale1pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; u32 val = 0; switch (counter) { @@ -412,9 +416,11 @@ xscale1pmu_read_counter(int counter) return val; } -static inline void -xscale1pmu_write_counter(int counter, u32 val) +static inline void xscale1pmu_write_counter(struct perf_event *event, u32 val) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + switch (counter) { case XSCALE_CYCLE_COUNTER: asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); @@ -434,24 +440,22 @@ static int xscale_map_event(struct perf_event *event) &xscale_perf_cache_map, 0xFF); } -static struct arm_pmu xscale1pmu = { - .name = "xscale1", - .handle_irq = xscale1pmu_handle_irq, - .enable = xscale1pmu_enable_event, - .disable = xscale1pmu_disable_event, - .read_counter = xscale1pmu_read_counter, - .write_counter = xscale1pmu_write_counter, - .get_event_idx = xscale1pmu_get_event_idx, - .start = xscale1pmu_start, - .stop = xscale1pmu_stop, - .map_event = xscale_map_event, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit xscale1pmu_init(void) +static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu) { - return &xscale1pmu; + cpu_pmu->name = "xscale1"; + cpu_pmu->handle_irq = xscale1pmu_handle_irq; + cpu_pmu->enable = xscale1pmu_enable_event; + cpu_pmu->disable = xscale1pmu_disable_event; + cpu_pmu->read_counter = xscale1pmu_read_counter; + cpu_pmu->write_counter = xscale1pmu_write_counter; + cpu_pmu->get_event_idx = xscale1pmu_get_event_idx; + cpu_pmu->start = xscale1pmu_start; + cpu_pmu->stop = xscale1pmu_stop; + cpu_pmu->map_event = xscale_map_event; + cpu_pmu->num_events = 3; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #define XSCALE2_OVERFLOWED_MASK 0x01f @@ -567,7 +571,8 @@ xscale2pmu_handle_irq(int irq_num, void *dev) { unsigned long pmnc, of_flags; struct perf_sample_data data; - struct pmu_hw_events *cpuc; + struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events(); struct pt_regs *regs; int idx; @@ -585,7 +590,6 @@ xscale2pmu_handle_irq(int irq_num, void *dev) regs = get_irq_regs(); - cpuc = &__get_cpu_var(cpu_hw_events); for (idx = 0; idx < cpu_pmu->num_events; ++idx) { struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; @@ -597,13 +601,13 @@ xscale2pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx); + armpmu_event_update(event); perf_sample_data_init(&data, 0, hwc->last_period); - if (!armpmu_event_set_period(event, hwc, idx)) + if (!armpmu_event_set_period(event)) continue; if (perf_event_overflow(event, &data, regs)) - cpu_pmu->disable(hwc, idx); + cpu_pmu->disable(event); } irq_work_run(); @@ -617,11 +621,13 @@ xscale2pmu_handle_irq(int irq_num, void *dev) return IRQ_HANDLED; } -static void -xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void xscale2pmu_enable_event(struct perf_event *event) { unsigned long flags, ien, evtsel; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -661,11 +667,13 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) +static void xscale2pmu_disable_event(struct perf_event *event) { unsigned long flags, ien, evtsel, of_flags; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); + int idx = hwc->idx; ien = xscale2pmu_read_int_enable(); evtsel = xscale2pmu_read_event_select(); @@ -713,7 +721,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) static int xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc, - struct hw_perf_event *event) + struct perf_event *event) { int idx = xscale1pmu_get_event_idx(cpuc, event); if (idx >= 0) @@ -727,8 +735,7 @@ out: return idx; } -static void -xscale2pmu_start(void) +static void xscale2pmu_start(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -740,8 +747,7 @@ xscale2pmu_start(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static void -xscale2pmu_stop(void) +static void xscale2pmu_stop(struct arm_pmu *cpu_pmu) { unsigned long flags, val; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); @@ -753,9 +759,10 @@ xscale2pmu_stop(void) raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static inline u32 -xscale2pmu_read_counter(int counter) +static inline u32 xscale2pmu_read_counter(struct perf_event *event) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; u32 val = 0; switch (counter) { @@ -779,9 +786,11 @@ xscale2pmu_read_counter(int counter) return val; } -static inline void -xscale2pmu_write_counter(int counter, u32 val) +static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val) { + struct hw_perf_event *hwc = &event->hw; + int counter = hwc->idx; + switch (counter) { case XSCALE_CYCLE_COUNTER: asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); @@ -801,33 +810,31 @@ xscale2pmu_write_counter(int counter, u32 val) } } -static struct arm_pmu xscale2pmu = { - .name = "xscale2", - .handle_irq = xscale2pmu_handle_irq, - .enable = xscale2pmu_enable_event, - .disable = xscale2pmu_disable_event, - .read_counter = xscale2pmu_read_counter, - .write_counter = xscale2pmu_write_counter, - .get_event_idx = xscale2pmu_get_event_idx, - .start = xscale2pmu_start, - .stop = xscale2pmu_stop, - .map_event = xscale_map_event, - .num_events = 5, - .max_period = (1LLU << 32) - 1, -}; - -static struct arm_pmu *__devinit xscale2pmu_init(void) +static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu) { - return &xscale2pmu; + cpu_pmu->name = "xscale2"; + cpu_pmu->handle_irq = xscale2pmu_handle_irq; + cpu_pmu->enable = xscale2pmu_enable_event; + cpu_pmu->disable = xscale2pmu_disable_event; + cpu_pmu->read_counter = xscale2pmu_read_counter; + cpu_pmu->write_counter = xscale2pmu_write_counter; + cpu_pmu->get_event_idx = xscale2pmu_get_event_idx; + cpu_pmu->start = xscale2pmu_start; + cpu_pmu->stop = xscale2pmu_stop; + cpu_pmu->map_event = xscale_map_event; + cpu_pmu->num_events = 5; + cpu_pmu->max_period = (1LLU << 32) - 1; + + return 0; } #else -static struct arm_pmu *__devinit xscale1pmu_init(void) +static inline int xscale1pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } -static struct arm_pmu *__devinit xscale2pmu_init(void) +static inline int xscale2pmu_init(struct arm_pmu *cpu_pmu) { - return NULL; + return -ENODEV; } #endif /* CONFIG_CPU_XSCALE */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 90084a6..44bc0b3 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -34,6 +34,7 @@ #include <linux/leds.h> #include <asm/cacheflush.h> +#include <asm/idmap.h> #include <asm/processor.h> #include <asm/thread_notify.h> #include <asm/stacktrace.h> @@ -56,8 +57,6 @@ static const char *isa_modes[] = { "ARM" , "Thumb" , "Jazelle", "ThumbEE" }; -extern void setup_mm_for_reboot(void); - static volatile int hlt_counter; void disable_hlt(void) @@ -70,6 +69,7 @@ EXPORT_SYMBOL(disable_hlt); void enable_hlt(void) { hlt_counter--; + BUG_ON(hlt_counter < 0); } EXPORT_SYMBOL(enable_hlt); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 739db3a..03deeff 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -916,16 +916,11 @@ enum ptrace_syscall_dir { PTRACE_SYSCALL_EXIT, }; -static int ptrace_syscall_trace(struct pt_regs *regs, int scno, - enum ptrace_syscall_dir dir) +static int tracehook_report_syscall(struct pt_regs *regs, + enum ptrace_syscall_dir dir) { unsigned long ip; - current_thread_info()->syscall = scno; - - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return scno; - /* * IP is used to denote syscall entry/exit: * IP = 0 -> entry, =1 -> exit @@ -944,19 +939,41 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) { - scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + current_thread_info()->syscall = scno; + + /* Do the secure computing check first; failures should be fast. */ + if (secure_computing(scno) == -1) + return -1; + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + scno = tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, scno); + audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); + return scno; } -asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno) +asmlinkage void syscall_trace_exit(struct pt_regs *regs) { - scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); - if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) - trace_sys_exit(regs, scno); + /* + * Audit the syscall before anything else, as a debugger may + * come in and change the current registers. + */ audit_syscall_exit(regs); - return scno; + + /* + * Note that we haven't updated the ->syscall field for the + * current thread. This isn't a problem because it will have + * been set on syscall entry and there hasn't been an opportunity + * for a PTRACE_SET_SYSCALL since then. + */ + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_exit(regs, regs_return_value(regs)); + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index da1d1aa..9a89bf4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -383,6 +383,12 @@ void cpu_init(void) BUG(); } + /* + * This only works on resume and secondary cores. For booting on the + * boot cpu, smp_prepare_boot_cpu is called after percpu area setup. + */ + set_my_cpu_offset(per_cpu_offset(cpu)); + cpu_proc_init(); /* @@ -426,13 +432,14 @@ int __cpu_logical_map[NR_CPUS]; void __init smp_setup_processor_id(void) { int i; - u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; + u32 cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cpu_logical_map(0) = cpu; - for (i = 1; i < NR_CPUS; ++i) + for (i = 1; i < nr_cpu_ids; ++i) cpu_logical_map(i) = i == cpu ? 0 : i; - printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); + printk(KERN_INFO "Booting Linux on physical CPU 0x%x\n", mpidr); } static void __init setup_processor(void) @@ -758,6 +765,7 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); + arm_dt_init_cpu_maps(); #ifdef CONFIG_SMP if (is_smp()) { smp_set_ops(mdesc->smp); @@ -841,12 +849,9 @@ static const char *hwcap_str[] = { static int c_show(struct seq_file *m, void *v) { - int i; + int i, j; + u32 cpuid; - seq_printf(m, "Processor\t: %s rev %d (%s)\n", - cpu_name, read_cpuid_id() & 15, elf_platform); - -#if defined(CONFIG_SMP) for_each_online_cpu(i) { /* * glibc reads /proc/cpuinfo to determine the number of @@ -854,45 +859,48 @@ static int c_show(struct seq_file *m, void *v) * "processor". Give glibc what it expects. */ seq_printf(m, "processor\t: %d\n", i); - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n", + cpuid = is_smp() ? per_cpu(cpu_data, i).cpuid : read_cpuid_id(); + seq_printf(m, "model name\t: %s rev %d (%s)\n", + cpu_name, cpuid & 15, elf_platform); + +#if defined(CONFIG_SMP) + seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ), (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100); - } -#else /* CONFIG_SMP */ - seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", - loops_per_jiffy / (500000/HZ), - (loops_per_jiffy / (5000/HZ)) % 100); +#else + seq_printf(m, "BogoMIPS\t: %lu.%02lu\n", + loops_per_jiffy / (500000/HZ), + (loops_per_jiffy / (5000/HZ)) % 100); #endif + /* dump out the processor features */ + seq_puts(m, "Features\t: "); - /* dump out the processor features */ - seq_puts(m, "Features\t: "); - - for (i = 0; hwcap_str[i]; i++) - if (elf_hwcap & (1 << i)) - seq_printf(m, "%s ", hwcap_str[i]); + for (j = 0; hwcap_str[j]; j++) + if (elf_hwcap & (1 << j)) + seq_printf(m, "%s ", hwcap_str[j]); - seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24); - seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]); + seq_printf(m, "\nCPU implementer\t: 0x%02x\n", cpuid >> 24); + seq_printf(m, "CPU architecture: %s\n", + proc_arch[cpu_architecture()]); - if ((read_cpuid_id() & 0x0008f000) == 0x00000000) { - /* pre-ARM7 */ - seq_printf(m, "CPU part\t: %07x\n", read_cpuid_id() >> 4); - } else { - if ((read_cpuid_id() & 0x0008f000) == 0x00007000) { - /* ARM7 */ - seq_printf(m, "CPU variant\t: 0x%02x\n", - (read_cpuid_id() >> 16) & 127); + if ((cpuid & 0x0008f000) == 0x00000000) { + /* pre-ARM7 */ + seq_printf(m, "CPU part\t: %07x\n", cpuid >> 4); } else { - /* post-ARM7 */ - seq_printf(m, "CPU variant\t: 0x%x\n", - (read_cpuid_id() >> 20) & 15); + if ((cpuid & 0x0008f000) == 0x00007000) { + /* ARM7 */ + seq_printf(m, "CPU variant\t: 0x%02x\n", + (cpuid >> 16) & 127); + } else { + /* post-ARM7 */ + seq_printf(m, "CPU variant\t: 0x%x\n", + (cpuid >> 20) & 15); + } + seq_printf(m, "CPU part\t: 0x%03x\n", + (cpuid >> 4) & 0xfff); } - seq_printf(m, "CPU part\t: 0x%03x\n", - (read_cpuid_id() >> 4) & 0xfff); + seq_printf(m, "CPU revision\t: %d\n\n", cpuid & 15); } - seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15); - - seq_puts(m, "\n"); seq_printf(m, "Hardware\t: %s\n", machine_name); seq_printf(m, "Revision\t: %04x\n", system_rev); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index fbc8b26..84f4cbf 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -281,6 +281,7 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); cpu_info->loops_per_jiffy = loops_per_jiffy; + cpu_info->cpuid = read_cpuid_id(); store_cpu_topology(cpuid); } @@ -313,9 +314,10 @@ asmlinkage void __cpuinit secondary_start_kernel(void) current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); + cpu_init(); + printk("CPU%u: Booted secondary processor\n", cpu); - cpu_init(); preempt_disable(); trace_hardirqs_off(); @@ -371,6 +373,7 @@ void __init smp_cpus_done(unsigned int max_cpus) void __init smp_prepare_boot_cpu(void) { + set_my_cpu_offset(per_cpu_offset(smp_processor_id())); } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -421,6 +424,11 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask) smp_cross_call(mask, IPI_CALL_FUNC); } +void arch_send_wakeup_ipi_mask(const struct cpumask *mask) +{ + smp_cross_call(mask, IPI_WAKEUP); +} + void arch_send_call_function_single_ipi(int cpu) { smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); @@ -443,7 +451,7 @@ void show_ipi_list(struct seq_file *p, int prec) for (i = 0; i < NR_IPI; i++) { seq_printf(p, "%*s%u: ", prec - 1, "IPI", i); - for_each_present_cpu(cpu) + for_each_online_cpu(cpu) seq_printf(p, "%10u ", __get_irq_stat(cpu, ipi_irqs[i])); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 999aa48..49f335d 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -31,6 +31,8 @@ static void __iomem *twd_base; static struct clk *twd_clk; static unsigned long twd_timer_rate; +static bool common_setup_called; +static DEFINE_PER_CPU(bool, percpu_setup_called); static struct clock_event_device __percpu **twd_evt; static int twd_ppi; @@ -248,17 +250,9 @@ static struct clk *twd_get_clock(void) return clk; } - err = clk_prepare(clk); + err = clk_prepare_enable(clk); if (err) { - pr_err("smp_twd: clock failed to prepare: %d\n", err); - clk_put(clk); - return ERR_PTR(err); - } - - err = clk_enable(clk); - if (err) { - pr_err("smp_twd: clock failed to enable: %d\n", err); - clk_unprepare(clk); + pr_err("smp_twd: clock failed to prepare+enable: %d\n", err); clk_put(clk); return ERR_PTR(err); } @@ -272,15 +266,45 @@ static struct clk *twd_get_clock(void) static int __cpuinit twd_timer_setup(struct clock_event_device *clk) { struct clock_event_device **this_cpu_clk; + int cpu = smp_processor_id(); + + /* + * If the basic setup for this CPU has been done before don't + * bother with the below. + */ + if (per_cpu(percpu_setup_called, cpu)) { + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + clockevents_register_device(*__this_cpu_ptr(twd_evt)); + enable_percpu_irq(clk->irq, 0); + return 0; + } + per_cpu(percpu_setup_called, cpu) = true; - if (!twd_clk) + /* + * This stuff only need to be done once for the entire TWD cluster + * during the runtime of the system. + */ + if (!common_setup_called) { twd_clk = twd_get_clock(); - if (!IS_ERR_OR_NULL(twd_clk)) - twd_timer_rate = clk_get_rate(twd_clk); - else - twd_calibrate_rate(); + /* + * We use IS_ERR_OR_NULL() here, because if the clock stubs + * are active we will get a valid clk reference which is + * however NULL and will return the rate 0. In that case we + * need to calibrate the rate instead. + */ + if (!IS_ERR_OR_NULL(twd_clk)) + twd_timer_rate = clk_get_rate(twd_clk); + else + twd_calibrate_rate(); + + common_setup_called = true; + } + /* + * The following is done once per CPU the first time .setup() is + * called. + */ __raw_writel(0, twd_base + TWD_TIMER_CONTROL); clk->name = "local_timer"; diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 26c12c6..79282eb 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -196,32 +196,7 @@ static inline void parse_dt_topology(void) {} static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} #endif - -/* - * cpu topology management - */ - -#define MPIDR_SMP_BITMASK (0x3 << 30) -#define MPIDR_SMP_VALUE (0x2 << 30) - -#define MPIDR_MT_BITMASK (0x1 << 24) - -/* - * These masks reflect the current use of the affinity levels. - * The affinity level can be up to 16 bits according to ARM ARM - */ -#define MPIDR_HWID_BITMASK 0xFFFFFF - -#define MPIDR_LEVEL0_MASK 0x3 -#define MPIDR_LEVEL0_SHIFT 0 - -#define MPIDR_LEVEL1_MASK 0xF -#define MPIDR_LEVEL1_SHIFT 8 - -#define MPIDR_LEVEL2_MASK 0xFF -#define MPIDR_LEVEL2_SHIFT 16 - -/* + /* * cpu topology table */ struct cputopo_arm cpu_topology[NR_CPUS]; @@ -282,19 +257,14 @@ void store_cpu_topology(unsigned int cpuid) if (mpidr & MPIDR_MT_BITMASK) { /* core performance interdependency */ - cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT) - & MPIDR_LEVEL0_MASK; - cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT) - & MPIDR_LEVEL1_MASK; - cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT) - & MPIDR_LEVEL2_MASK; + cpuid_topo->thread_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpuid_topo->socket_id = MPIDR_AFFINITY_LEVEL(mpidr, 2); } else { /* largely independent cores */ cpuid_topo->thread_id = -1; - cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT) - & MPIDR_LEVEL0_MASK; - cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT) - & MPIDR_LEVEL1_MASK; + cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cpuid_topo->socket_id = MPIDR_AFFINITY_LEVEL(mpidr, 1); } } else { /* diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 36ff15b..b9f38e3 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -114,6 +114,15 @@ SECTIONS RO_DATA(PAGE_SIZE) + . = ALIGN(4); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; +#ifdef CONFIG_MMU + *(__ex_table) +#endif + __stop___ex_table = .; + } + #ifdef CONFIG_ARM_UNWIND /* * Stack unwinding tables @@ -220,16 +229,6 @@ SECTIONS READ_MOSTLY_DATA(L1_CACHE_BYTES) /* - * The exception fixup table (might need resorting at runtime) - */ - . = ALIGN(4); - __start___ex_table = .; -#ifdef CONFIG_MMU - *(__ex_table) -#endif - __stop___ex_table = .; - - /* * and the usual data section */ DATA_DATA diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 0436242..e34c1bd 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -494,8 +494,17 @@ endif comment "Generic Board Type" +config MACH_AT91RM9200_DT + bool "Atmel AT91RM9200 Evaluation Kits with device-tree support" + depends on SOC_AT91RM9200 + select USE_OF + help + Select this if you want to experiment device-tree with + an Atmel RM9200 Evaluation Kit. + config MACH_AT91SAM_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" + depends on SOC_AT91SAM9 select USE_OF help Select this if you want to experiment device-tree with diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 3bb7a51..b38a1dc 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree +obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o # AT91X40 board-specific support diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/at91_aic.h index eaea661..eaea661 100644 --- a/arch/arm/mach-at91/include/mach/at91_aic.h +++ b/arch/arm/mach-at91/at91_aic.h diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h index 875fa33..875fa33 100644 --- a/arch/arm/mach-at91/include/mach/at91_rstc.h +++ b/arch/arm/mach-at91/at91_rstc.h diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h index 60478ea..60478ea 100644 --- a/arch/arm/mach-at91/include/mach/at91_shdwc.h +++ b/arch/arm/mach-at91/at91_shdwc.h diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/at91_tc.h index 46a317f..46a317f 100644 --- a/arch/arm/mach-at91/include/mach/at91_tc.h +++ b/arch/arm/mach-at91/at91_tc.h diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 5269825..8ce0682 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -17,11 +17,11 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91rm9200.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -194,6 +194,24 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), CLKDEV_CON_ID("pioD", &pioD_clk), + /* usart lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk), + /* tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -361,10 +379,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -struct at91_init_soc __initdata at91rm9200_soc = { +AT91_SOC_START(rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, .ioremap_registers = at91rm9200_ioremap_registers, .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 3cee0e6..2a1f8e6 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -18,11 +18,11 @@ #include <linux/platform_device.h> #include <linux/i2c-gpio.h> -#include <mach/board.h> #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index aaa443b..cafe988 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -24,6 +24,9 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/export.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -91,7 +94,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91rm9200_timer_interrupt + .handler = at91rm9200_timer_interrupt, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static cycle_t read_clk32k(struct clocksource *cs) @@ -179,8 +183,60 @@ static struct clock_event_device clkevt = { void __iomem *at91_st_base; EXPORT_SYMBOL_GPL(at91_st_base); +#ifdef CONFIG_OF +static struct of_device_id at91rm9200_st_timer_ids[] = { + { .compatible = "atmel,at91rm9200-st" }, + { /* sentinel */ } +}; + +static int __init of_at91rm9200_st_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (!np) + goto err; + + at91_st_base = of_iomap(np, 0); + if (!at91_st_base) + goto node_err; + + /* Get the interrupts property */ + ret = irq_of_parse_and_map(np, 0); + if (!ret) + goto ioremap_err; + at91rm9200_timer_irq.irq = ret; + + of_node_put(np); + + return 0; + +ioremap_err: + iounmap(at91_st_base); +node_err: + of_node_put(np); +err: + return -EINVAL; +} +#else +static int __init of_at91rm9200_st_init(void) +{ + return -EINVAL; +} +#endif + void __init at91rm9200_ioremap_st(u32 addr) { +#ifdef CONFIG_OF + struct device_node *np; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (np) { + of_node_put(np); + return; + } +#endif at91_st_base = ioremap(addr, 256); if (!at91_st_base) panic("Impossible to ioremap ST\n"); @@ -191,13 +247,16 @@ void __init at91rm9200_ioremap_st(u32 addr) */ void __init at91rm9200_timer_init(void) { + /* For device tree enabled device: initialize here */ + of_at91rm9200_st_init(); + /* Disable all timer interrupts, and clear any pending ones */ at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index f820261..c65e7b8 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -20,10 +20,10 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -230,11 +230,15 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -390,10 +394,10 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9260_soc = { +AT91_SOC_START(sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, .init = at91sam9260_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 414bd85..1f6fac2 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -19,7 +19,6 @@ #include <linux/platform_data/at91_adc.h> -#include <mach/board.h> #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> @@ -27,6 +26,7 @@ #include <mach/at91sam9_smc.h> #include <mach/at91_adc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 04295c0..9d3e9b8 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -19,10 +19,10 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -334,10 +334,10 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9261_soc = { +AT91_SOC_START(sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, .init = at91sam9261_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index cd604aa..6ce6d27 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -21,12 +21,12 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9261.h> #include <mach/at91sam9261_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index d6f9c23..82deb4d 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -211,7 +211,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -365,10 +372,10 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -struct at91_init_soc __initdata at91sam9263_soc = { +AT91_SOC_START(sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, .init = at91sam9263_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 9c61e59..fb98163 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -20,12 +20,12 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index ffc0957..358412f 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -20,8 +20,18 @@ #include <asm/mach/time.h> -#include <mach/at91_pit.h> - +#define AT91_PIT_MR 0x00 /* Mode Register */ +#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ +#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ +#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ + +#define AT91_PIT_SR 0x04 /* Status Register */ +#define AT91_PIT_PITS (1 << 0) /* Timer Status */ + +#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ +#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ +#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index 7af2e10..f039538 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -16,7 +16,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> #include <mach/at91_ramc.h> -#include <mach/at91_rstc.h> +#include "at91_rstc.h" .arm diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 84af1b5..45d753d 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9g45.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -256,10 +256,18 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), @@ -343,7 +351,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { static void __init at91sam9g45_map_io(void) { at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); - init_consistent_dma_size(SZ_4M); } static void __init at91sam9g45_ioremap_registers(void) @@ -409,10 +416,10 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -struct at91_init_soc __initdata at91sam9g45_soc = { +AT91_SOC_START(sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, .init = at91sam9g45_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index fcd233c..e359642 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -26,7 +26,6 @@ #include <video/atmel_lcdc.h> #include <mach/at91_adc.h> -#include <mach/board.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> @@ -36,6 +35,7 @@ #include <media/atmel-isi.h> +#include "board.h" #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 9d45718..721a1a3 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -13,8 +13,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> #include <mach/at91_ramc.h> -#include <mach/at91_rstc.h> - +#include "at91_rstc.h" .arm .globl at91sam9g45_restart diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 732d3d3..5dfc8fd 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -15,8 +15,8 @@ #include <mach/at91sam9n12.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> -#include <mach/board.h> +#include "board.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -168,13 +168,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), @@ -223,13 +224,10 @@ static void __init at91sam9n12_map_io(void) void __init at91sam9n12_initialize(void) { at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); - - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); } -struct at91_init_soc __initdata at91sam9n12_soc = { +AT91_SOC_START(sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, .init = at91sam9n12_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 72e9084..44e3a63 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -19,10 +19,10 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> +#include "at91_aic.h" +#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -338,10 +338,10 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9rl_soc = { +AT91_SOC_START(sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, .ioremap_registers = at91sam9rl_ioremap_registers, .register_clocks = at91sam9rl_register_clocks, .init = at91sam9rl_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 5047bdc..160384d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -17,13 +17,13 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/board.h> #include <mach/at91sam9rl.h> #include <mach/at91sam9rl_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <linux/platform_data/dma-atmel.h> +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e503538..dfb2c0c 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -15,8 +15,8 @@ #include <mach/at91sam9x5.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> -#include <mach/board.h> +#include "board.h" #include "soc.h" #include "generic.h" #include "clock.h" @@ -229,15 +229,17 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), @@ -313,18 +315,11 @@ static void __init at91sam9x5_map_io(void) at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); } -void __init at91sam9x5_initialize(void) -{ - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); -} - /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -struct at91_init_soc __initdata at91sam9x5_soc = { +AT91_SOC_START(sam9x5) .map_io = at91sam9x5_map_io, .register_clocks = at91sam9x5_register_clocks, - .init = at91sam9x5_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index bb7f544..19ca793 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -18,9 +18,10 @@ #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> -#include <mach/at91_aic.h> #include <mach/at91_st.h> #include <mach/timex.h> + +#include "at91_aic.h" #include "generic.h" /* diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index ee06d7b..0e57e44 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -26,7 +26,8 @@ #include <linux/io.h> #include <mach/hardware.h> #include <asm/mach/time.h> -#include <mach/at91_tc.h> + +#include "at91_tc.h" #define at91_tc_read(field) \ __raw_readl(AT91_IO_P2V(AT91_TC) + field) diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 22d8856..b99b575 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -34,10 +34,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 93a832f..854b979 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -43,9 +43,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 477e708..28a18ce 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -38,10 +38,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 71d8f36..c17bb53 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -35,9 +35,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index e71c473..8474324 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -40,12 +40,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2cbd1a2..2a7af78 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -36,12 +36,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static struct gpio_led cpuat91_leds[] = { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 3e37437..78e0250 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -38,9 +38,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 872871a..ec0f3ab 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -35,9 +35,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index e8f45c4..881170c 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -15,23 +15,20 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - #include <asm/setup.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static const struct of_device_id irq_of_match[] __initconst = { { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup }, - { .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup }, { /*sentinel*/ } }; diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index 01f66e9..b489388 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -27,8 +27,9 @@ #include <mach/hardware.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/at91_aic.h> + +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init at91eb01_init_irq(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 0cfac16..9f5e71c 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -35,9 +35,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> - +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 3d931ff..ef69e0e 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -37,10 +37,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index d93658a..50f3d37 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -24,12 +24,12 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init eco920_init_early(void) diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index fa98aba..5d44eba 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -33,9 +33,9 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init flexibity_init_early(void) diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 6e47071..191d37c 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -41,10 +41,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index a9d5e78..23a2fa1 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -30,14 +30,14 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/gsia18s.h> -#include <mach/stamp9g20.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gsia18s.h" +#include "stamp9g20.h" static void __init gsia18s_init_early(void) { diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 86050da..9a43d1e 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -34,10 +34,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index abe9fed..f168bec 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -35,12 +35,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> #include <mach/cpu.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 6960778..bc7a1c4 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -44,10 +44,10 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 9ca3e32..0299554 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -29,13 +29,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/stamp9g20.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "stamp9g20.h" static void __init pcontrol_g20_init_early(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index f83e1de..4938f1c 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -37,11 +37,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 799f214..33b1628 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -40,11 +40,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c new file mode 100644 index 0000000..5f9ce3d --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200-dt.c @@ -0,0 +1,57 @@ +/* + * Setup code for AT91RM9200 Evaluation Kits with Device Tree support + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "at91_aic.h" +#include "generic.h" + + +static const struct of_device_id irq_of_match[] __initconst = { + { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, + { /*sentinel*/ } +}; + +static void __init at91rm9200_dt_init_irq(void) +{ + of_irq_init(irq_of_match); +} + +static void __init at91rm9200_dt_device_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *at91rm9200_dt_board_compat[] __initdata = { + "atmel,at91rm9200", + NULL +}; + +DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") + .timer = &at91rm9200_timer, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = at91rm9200_dt_initialize, + .init_irq = at91rm9200_dt_init_irq, + .init_machine = at91rm9200_dt_device_init, + .dt_compat = at91rm9200_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 66338e7..9e5061b 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -39,11 +39,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 5d1b572..58277db 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -39,11 +39,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index a0ecf04..2e8b833 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -25,11 +25,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <linux/gpio.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" static void __init rsi_ews_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index c5f01ac..b75fbf6 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -37,10 +37,10 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 8cd6e67..f0135cd 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -41,12 +41,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index a9167dd..13ebaa8 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -45,12 +45,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index b87dbe2..89b9608 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -44,12 +44,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 3ab2b86..7b51238 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,11 +43,11 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 3d48ec1..e4cc375 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -42,12 +42,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> #include <mach/system_rev.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index fb89ea9..377a109 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -30,11 +30,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> + +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index a4e031a..9877150 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -32,10 +32,10 @@ #include <asm/mach/arch.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index c3fb31d..48a962b 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -25,10 +25,10 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> +#include "at91_aic.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 6ea069b..c1060f9 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -41,11 +41,11 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_shdwc.h> +#include "at91_aic.h" +#include "at91_shdwc.h" +#include "board.h" #include "sam9_smc.h" #include "generic.h" diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index f162fdf..8673aeb 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -43,12 +43,12 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/board.h> -#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> +#include "at91_aic.h" +#include "board.h" #include "generic.h" diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/board.h index c55a436..4a234fb 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/board.h @@ -31,71 +31,24 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H -#include <linux/mtd/partitions.h> -#include <linux/device.h> -#include <linux/i2c.h> -#include <linux/leds.h> -#include <linux/spi/spi.h> -#include <linux/usb/atmel_usba_udc.h> -#include <linux/atmel-mci.h> -#include <sound/atmel-ac97c.h> -#include <linux/serial.h> -#include <linux/platform_data/macb.h> #include <linux/platform_data/atmel.h> /* USB Device */ -struct at91_udc_data { - int vbus_pin; /* high == host powering us */ - u8 vbus_active_low; /* vbus polarity */ - u8 vbus_polled; /* Use polling, not interrupt */ - int pullup_pin; /* active == D+ pulled up */ - u8 pullup_active_low; /* true == pullup_pin is active low */ -}; extern void __init at91_add_device_udc(struct at91_udc_data *data); /* USB High Speed Device */ extern void __init at91_add_device_usba(struct usba_platform_data *data); /* Compact Flash */ -struct at91_cf_data { - int irq_pin; /* I/O IRQ */ - int det_pin; /* Card detect */ - int vcc_pin; /* power switching */ - int rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ - u8 flags; -#define AT91_CF_TRUE_IDE 0x01 -#define AT91_IDE_SWAP_A0_A2 0x02 -}; extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ - /* at91_mci platform config */ -struct at91_mmc_data { - int det_pin; /* card detect IRQ */ - unsigned slot_b:1; /* uses Slot B */ - unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ - int wp_pin; /* (SD) writeprotect detect */ - int vcc_pin; /* power switching (high == on) */ -}; -extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - /* atmel-mci platform config */ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ -#define AT91_MAX_USBH_PORTS 3 -struct at91_usbh_data { - int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ - int overcurrent_pin[AT91_MAX_USBH_PORTS]; - u8 ports; /* number of ports on root hub */ - u8 overcurrent_supported; - u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; - u8 overcurrent_status[AT91_MAX_USBH_PORTS]; - u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; -}; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); @@ -124,13 +77,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin extern struct platform_device *atmel_default_console_device; -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; extern void __init at91_add_device_serial(void); /* @@ -173,24 +119,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); /* Touchscreen Controller */ -struct at91_tsadcc_data { - unsigned int adc_clock; - u8 pendet_debounce; - u8 ts_sample_hold_time; -}; extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ -struct at91_can_data { - void (*transceiver_switch)(int on); -}; extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); -/* FIXME: this needs a better location, but gets stuff building again */ -extern int at91_suspend_entering_slow_clock(void); - #endif diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index b62f560e..fc593d6 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base, extern void __init at91rm9200_set_type(int type); extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91rm9200_dt_initialize(void); extern void __init at91_dt_initialize(void); /* Interrupts */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index be42cf0..c5d7e1e 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -23,8 +23,6 @@ #include <linux/io.h> #include <linux/irqdomain.h> #include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_gpio.h> #include <asm/mach/irq.h> @@ -33,6 +31,8 @@ #include "generic.h" +#define MAX_NB_GPIO_PER_BANK 32 + struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ @@ -46,6 +46,7 @@ struct at91_gpio_chip { #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); @@ -55,26 +56,27 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); -#define AT91_GPIO_CHIP(name, nr_gpio) \ +#define AT91_GPIO_CHIP(name) \ { \ .chip = { \ .label = name, \ + .request = at91_gpiolib_request, \ .direction_input = at91_gpiolib_direction_input, \ .direction_output = at91_gpiolib_direction_output, \ .get = at91_gpiolib_get, \ .set = at91_gpiolib_set, \ .dbg_show = at91_gpiolib_dbg_show, \ .to_irq = at91_gpiolib_to_irq, \ - .ngpio = nr_gpio, \ + .ngpio = MAX_NB_GPIO_PER_BANK, \ }, \ } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA", 32), - AT91_GPIO_CHIP("pioB", 32), - AT91_GPIO_CHIP("pioC", 32), - AT91_GPIO_CHIP("pioD", 32), - AT91_GPIO_CHIP("pioE", 32), + AT91_GPIO_CHIP("pioA"), + AT91_GPIO_CHIP("pioB"), + AT91_GPIO_CHIP("pioC"), + AT91_GPIO_CHIP("pioD"), + AT91_GPIO_CHIP("pioE"), }; static int gpio_banks; @@ -89,7 +91,7 @@ static unsigned long at91_gpio_caps; static inline void __iomem *pin_to_controller(unsigned pin) { - pin /= 32; + pin /= MAX_NB_GPIO_PER_BANK; if (likely(pin < gpio_banks)) return gpio_chip[pin].regbase; @@ -98,7 +100,7 @@ static inline void __iomem *pin_to_controller(unsigned pin) static inline unsigned pin_to_mask(unsigned pin) { - return 1 << (pin % 32); + return 1 << (pin % MAX_NB_GPIO_PER_BANK); } @@ -713,80 +715,6 @@ postcore_initcall(at91_gpio_debugfs_init); */ static struct lock_class_key gpio_lock_class; -#if defined(CONFIG_OF) -static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct at91_gpio_chip *at91_gpio = h->host_data; - - irq_set_lockdep_class(virq, &gpio_lock_class); - - /* - * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interrupts sanely. - */ - irq_set_chip_and_handler(virq, &gpio_irqchip, - handle_simple_irq); - set_irq_flags(virq, IRQF_VALID); - irq_set_chip_data(virq, at91_gpio); - - return 0; -} - -static struct irq_domain_ops at91_gpio_ops = { - .map = at91_gpio_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - struct at91_gpio_chip *prev = NULL; - int alias_idx = of_alias_get_id(node, "gpio"); - struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx]; - - /* Setup proper .irq_set_type function */ - if (has_pio3()) - gpio_irqchip.irq_set_type = alt_gpio_irq_type; - else - gpio_irqchip.irq_set_type = gpio_irq_type; - - /* Disable irqs of this PIO controller */ - __raw_writel(~0, at91_gpio->regbase + PIO_IDR); - - /* Setup irq domain */ - at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio, - &at91_gpio_ops, at91_gpio); - if (!at91_gpio->domain) - panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n", - at91_gpio->pioc_idx); - - /* Setup chained handler */ - if (at91_gpio->pioc_idx) - prev = &gpio_chip[at91_gpio->pioc_idx - 1]; - - /* The toplevel handler handles one bank of GPIOs, except - * on some SoC it can handles up to three... - * We only set up the handler for the first of the list. - */ - if (prev && prev->next == at91_gpio) - return 0; - - at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent), - at91_gpio->pioc_hwirq); - irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio); - irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler); - - return 0; -} -#else -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - return -EINVAL; -} -#endif - /* * irqdomain initialization: pile up irqdomains on top of AIC range */ @@ -862,6 +790,16 @@ void __init at91_gpio_irq_setup(void) } /* gpiolib support */ +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + __raw_writel(mask, pio + PIO_PER); + return 0; +} + static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset) { @@ -975,81 +913,11 @@ err: return -EINVAL; } -#ifdef CONFIG_OF_GPIO -static void __init of_at91_gpio_init_one(struct device_node *np) -{ - int alias_idx; - struct at91_gpio_chip *at91_gpio; - - if (!np) - return; - - alias_idx = of_alias_get_id(np, "gpio"); - if (alias_idx >= MAX_GPIO_BANKS) { - pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n", - alias_idx, MAX_GPIO_BANKS); - return; - } - - at91_gpio = &gpio_chip[alias_idx]; - at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio; - - at91_gpio->regbase = of_iomap(np, 0); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", - alias_idx); - return; - } - - /* Get the interrupts property */ - if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) { - pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n", - alias_idx); - goto ioremap_err; - } - - /* Get capabilities from compatibility property */ - if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio")) - at91_gpio_caps |= AT91_GPIO_CAP_PIO3; - - /* Setup clock */ - if (at91_gpio_setup_clk(alias_idx)) - goto ioremap_err; - - at91_gpio->chip.of_node = np; - gpio_banks = max(gpio_banks, alias_idx + 1); - at91_gpio->pioc_idx = alias_idx; - return; - -ioremap_err: - iounmap(at91_gpio->regbase); -} - -static int __init of_at91_gpio_init(void) -{ - struct device_node *np = NULL; - - /* - * This isn't ideal, but it gets things hooked up until this - * driver is converted into a platform_device - */ - for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio") - of_at91_gpio_init_one(np); - - return gpio_banks > 0 ? 0 : -EINVAL; -} -#else -static int __init of_at91_gpio_init(void) -{ - return -EINVAL; -} -#endif - static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) { struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - at91_gpio->chip.base = idx * at91_gpio->chip.ngpio; + at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK; at91_gpio->pioc_hwirq = pioc_hwirq; at91_gpio->pioc_idx = idx; @@ -1079,11 +947,11 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) BUG_ON(nr_banks > MAX_GPIO_BANKS); - if (of_at91_gpio_init() < 0) { - /* No GPIO controller found in device tree */ - for (i = 0; i < nr_banks; i++) - at91_gpio_init_one(i, data[i].regbase, data[i].id); - } + if (of_have_populated_dt()) + return; + + for (i = 0; i < nr_banks; i++) + at91_gpio_init_one(i, data[i].regbase, data[i].id); for (i = 0; i < gpio_banks; i++) { at91_gpio = &gpio_chip[i]; diff --git a/arch/arm/mach-at91/include/mach/gsia18s.h b/arch/arm/mach-at91/gsia18s.h index 307c194..307c194 100644 --- a/arch/arm/mach-at91/include/mach/gsia18s.h +++ b/arch/arm/mach-at91/gsia18s.h diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h deleted file mode 100644 index d1f80ad..0000000 --- a/arch/arm/mach-at91/include/mach/at91_pit.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_pit.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Periodic Interval Timer (PIT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIT_H -#define AT91_PIT_H - -#define AT91_PIT_MR 0x00 /* Mode Register */ -#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ - -#define AT91_PIT_SR 0x04 /* Status Register */ -#define AT91_PIT_PITS (1 << 0) /* Timer Status */ - -#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ -#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h deleted file mode 100644 index da1945e..0000000 --- a/arch/arm/mach-at91/include/mach/at91_rtc.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_rtc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Real Time Clock (RTC) - System peripheral registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTC_H -#define AT91_RTC_H - -#define AT91_RTC_CR 0x00 /* Control Register */ -#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ -#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ -#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ -#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) -#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) - -#define AT91_RTC_MR 0x04 /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ - -#define AT91_RTC_TIMR 0x08 /* Time Register */ -#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ -#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ - -#define AT91_RTC_CALR 0x0c /* Calendar Register */ -#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ -#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ -#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ -#define AT91_RTC_DAY (7 << 21) /* Current Day */ -#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ - -#define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ -#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ -#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ -#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ - -#define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ -#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ -#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ - -#define AT91_RTC_SR 0x18 /* Status Register */ -#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ -#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ -#define AT91_RTC_SECEV (1 << 2) /* Second Event */ -#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ -#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ - -#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ -#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ -#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ -#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ - -#define AT91_RTC_VER 0x2c /* Valid Entry Register */ -#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ -#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ -#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ -#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h index cd580a1..3069e41 100644 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ b/arch/arm/mach-at91/include/mach/atmel-mci.h @@ -14,11 +14,4 @@ struct mci_dma_data { #define slave_data_ptr(s) (&(s)->sdata) #define find_slave_dev(s) ((s)->sdata.dma_dev) -#define setup_dma_addr(s, t, r) do { \ - if (s) { \ - (s)->sdata.tx_reg = (t); \ - (s)->sdata.rx_reg = (r); \ - } \ -} while (0) - #endif /* __MACH_ATMEL_MCI_H */ diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 711a789..a832e07 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -90,9 +90,6 @@ #define AT91_SRAM_MAX SZ_1M #define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) -/* Serial ports */ -#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ - /* External Memory Map */ #define AT91_CHIPSELECT_0 0x10000000 #define AT91_CHIPSELECT_1 0x20000000 diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index febc2ee..8e21026 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -42,7 +42,7 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <mach/at91_aic.h> +#include "at91_aic.h" void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 1b1e62b..3e22978 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <mach/board.h> +#include "board.h" /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5315f05..adb6db8 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -25,10 +25,10 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> +#include "at91_aic.h" #include "generic.h" #include "pm.h" @@ -36,8 +36,8 @@ * Show the reason for the previous system reset. */ -#include <mach/at91_rstc.h> -#include <mach/at91_shdwc.h> +#include "at91_rstc.h" +#include "at91_shdwc.h" static void __init show_reset_status(void) { diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 0b32c81..9ee866c 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -10,6 +10,7 @@ #include <linux/mm.h> #include <linux/pm.h> #include <linux/of_address.h> +#include <linux/pinctrl/machine.h> #include <asm/system_misc.h> #include <asm/mach/map.h> @@ -18,8 +19,8 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91_pmc.h> -#include <mach/at91_shdwc.h> +#include "at91_shdwc.h" #include "soc.h" #include "generic.h" @@ -338,6 +339,7 @@ static void at91_dt_rstc(void) } static struct of_device_id ramc_ids[] = { + { .compatible = "atmel,at91rm9200-sdramc" }, { .compatible = "atmel,at91sam9260-sdramc" }, { .compatible = "atmel,at91sam9g45-ddramc" }, { /*sentinel*/ } @@ -436,6 +438,19 @@ end: of_node_put(np); } +void __init at91rm9200_dt_initialize(void) +{ + at91_dt_ramc(); + + /* Init clock subsystem */ + at91_dt_clock_init(); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} + void __init at91_dt_initialize(void) { at91_dt_rstc(); @@ -448,7 +463,8 @@ void __init at91_dt_initialize(void) /* Register the processor-specific clocks */ at91_boot_soc.register_clocks(); - at91_boot_soc.init(); + if (at91_boot_soc.init) + at91_boot_soc.init(); } #endif @@ -463,4 +479,6 @@ void __init at91_initialize(unsigned long main_clock) at91_boot_soc.register_clocks(); at91_boot_soc.init(); + + pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index a9cfeb1..9c6d3d4 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -5,6 +5,7 @@ */ struct at91_init_soc { + int builtin; unsigned int *default_irq_priority; void (*map_io)(void); void (*ioremap_registers)(void); @@ -22,9 +23,18 @@ extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; +#define AT91_SOC_START(_name) \ +struct at91_init_soc __initdata at91##_name##_soc \ + __used \ + = { \ + .builtin = 1, \ + +#define AT91_SOC_END \ +}; + static inline int at91_soc_is_enabled(void) { - return at91_boot_soc.init != NULL; + return at91_boot_soc.builtin; } #if !defined(CONFIG_SOC_AT91RM9200) diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/stamp9g20.h index f62c0ab..f62c0ab 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/stamp9g20.h diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot index 2d30e17..b327175 100644 --- a/arch/arm/mach-bcm2835/Makefile.boot +++ b/arch/arm/mach-bcm2835/Makefile.boot @@ -1,3 +1 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 +zreladdr-y := 0x00008000 diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index c4dd210..f0d739f 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -74,12 +74,12 @@ static struct map_desc io_map __initdata = { .type = MT_DEVICE }; -void __init bcm2835_map_io(void) +static void __init bcm2835_map_io(void) { iotable_init(&io_map, 1); } -void __init bcm2835_init(void) +static void __init bcm2835_init(void) { int ret; diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 29b13f2..9ebfcc4 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -3,7 +3,6 @@ menu "CNS3XXX platform type" config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" - select MIGHT_HAVE_PCI help Include support for the Cavium Networks CNS3420 MPCore Platform Baseboard. diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 2c5fb4c..ae30539 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -24,6 +24,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/hardware/gic.h> @@ -32,6 +34,7 @@ #include <asm/mach/time.h> #include <mach/cns3xxx.h> #include <mach/irqs.h> +#include <mach/pm.h> #include "core.h" #include "devices.h" @@ -125,13 +128,52 @@ static struct resource cns3xxx_usb_ehci_resources[] = { static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32); +static int csn3xxx_usb_power_on(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + * + * Set USB AHB INCR length to 16 + */ + if (atomic_inc_return(&usb_pwr_ref) == 1) { + cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB); + cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); + cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST); + __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)), + MISC_CHIP_CONFIG_REG); + } + + return 0; +} + +static void csn3xxx_usb_power_off(struct platform_device *pdev) +{ + /* + * EHCI and OHCI share the same clock and power, + * resetting twice would cause the 1st controller been reset. + * Therefore only do power up at the first up device, and + * power down at the last down device. + */ + if (atomic_dec_return(&usb_pwr_ref) == 0) + cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST); +} + +static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = { + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + static struct platform_device cns3xxx_usb_ehci_device = { - .name = "cns3xxx-ehci", + .name = "ehci-platform", .num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources), .resource = cns3xxx_usb_ehci_resources, .dev = { .dma_mask = &cns3xxx_usb_ehci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cns3xxx_usb_ehci_pdata, }, }; @@ -149,13 +191,20 @@ static struct resource cns3xxx_usb_ohci_resources[] = { static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32); +static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { + .num_ports = 1, + .power_on = csn3xxx_usb_power_on, + .power_off = csn3xxx_usb_power_off, +}; + static struct platform_device cns3xxx_usb_ohci_device = { - .name = "cns3xxx-ohci", + .name = "ohci-platform", .num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources), .resource = cns3xxx_usb_ohci_resources, .dev = { .dma_mask = &cns3xxx_usb_ohci_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cns3xxx_usb_ohci_pdata, }, }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index a84dfcb..f5e018d 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -519,13 +519,11 @@ static int dm6444evm_msp430_get_pins(void) char buf[4]; struct i2c_msg msg[2] = { { - .addr = dm6446evm_msp->addr, .flags = 0, .len = 2, .buf = (void __force *)txbuf, }, { - .addr = dm6446evm_msp->addr, .flags = I2C_M_RD, .len = 4, .buf = buf, @@ -536,6 +534,9 @@ static int dm6444evm_msp430_get_pins(void) if (!dm6446evm_msp) return -ENXIO; + msg[0].addr = dm6446evm_msp->addr; + msg[1].addr = dm6446evm_msp->addr; + /* Command 4 == get input state, returns port 2 and port3 data * S Addr W [A] len=2 [A] cmd=4 [A] * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 1dbf85b..9211e88 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -194,7 +194,7 @@ static int evm_led_setup(struct i2c_client *client, int gpio, while (ngpio--) { leds->gpio = gpio++; leds++; - }; + } evm_led_dev = platform_device_alloc("leds-gpio", 0); platform_device_add_data(evm_led_dev, &evm_led_data, diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 64b0f65..a794f6d 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -87,8 +87,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) iotable_init(davinci_soc_info.io_desc, davinci_soc_info.io_desc_num); - init_consistent_dma_size(14 << 20); - /* * Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 29b17f7..773ab07 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -374,7 +374,7 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) * complete sample conversion in time. */ tsc_clk = clk_get(NULL, "sys_tsc_clk"); - if (tsc_clk) { + if (!IS_ERR(tsc_clk)) { error = clk_set_rate(tsc_clk, 5000000); WARN_ON(error < 0); clk_put(tsc_clk); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 9ab1f10..11c79a3 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, break; case VPBE_ENC_CUSTOM_TIMINGS: if (pclock <= 27000000) { - v |= DM644X_VPSS_MUXSEL_PLL2_MODE | - DM644X_VPSS_DACCLKEN; + v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); } else { /* diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 2d9d921..62ad300 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -38,7 +38,7 @@ #ifndef __ASSEMBLY__ struct davinci_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ + /* Bit field of UARTs present; bit 0 --> UART0 */ unsigned int enabled_uarts; }; diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 18cfd49..3a0ff90 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -32,6 +32,9 @@ u32 *uart; /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) { + if (!uart) + return; + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); uart[UART_TX] = c; @@ -39,6 +42,9 @@ static void putc(char c) static inline void flush(void) { + if (!uart) + return; + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index f77b953..34509ff 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data usb_data = { -#if defined(CONFIG_USB_MUSB_OTG) /* OTG requires a Mini-AB connector */ .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#elif defined(CONFIG_USB_MUSB_HOST) - .mode = MUSB_HOST, -#endif .clock = "usb", .config = &musb_config, }; diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 7bcd0df..b47f750 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin) static inline int irq_to_pmu(int irq) { - if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS) + if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS) return irq - IRQ_DOVE_PMU_START; return -EINVAL; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 0877115..bc4344a 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d) int pin = irq_to_pmu(d->irq); u32 u; + /* + * The PMU mask register is not RW0C: it is RW. This means that + * the bits take whatever value is written to them; if you write + * a '1', you will set the interrupt. + * + * Unfortunately this means there is NO race free way to clear + * these interrupts. + * + * So, let's structure the code so that the window is as small as + * possible. + */ u = ~(1 << (pin & 31)); - writel(u, PMU_INTERRUPT_CAUSE); + u &= readl_relaxed(PMU_INTERRUPT_CAUSE); + writel_relaxed(u, PMU_INTERRUPT_CAUSE); } static struct irq_chip pmu_irq_chip = { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index ed17e35..070c7b6 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -107,11 +107,6 @@ config EXYNOS_DEV_SYSMMU help Common setup code for SYSTEM MMU in EXYNOS platforms -config EXYNOS4_DEV_DWMCI - bool - help - Compile in platform device definitions for DWMCI - config EXYNOS4_DEV_USB_OHCI bool help diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 1a076df..66135ee 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -50,7 +50,6 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o obj-y += dev-uart.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index 6a45c9a..fa8a134 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -613,11 +613,6 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 18), }, { .name = "iis", - .devname = "samsung-i2s.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "iis", .devname = "samsung-i2s.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 20), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index c44ca1e..4478757 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -292,7 +292,7 @@ static struct clksrc_sources exynos5_clk_src_mpll = { .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list), }; -struct clksrc_clk exynos5_clk_mout_mpll = { +static struct clksrc_clk exynos5_clk_mout_mpll = { .clk = { .name = "mout_mpll", }, @@ -467,12 +467,12 @@ static struct clksrc_clk exynos5_clk_pclk_acp = { /* Core list of CMU_TOP side */ -struct clk *exynos5_clkset_aclk_top_list[] = { +static struct clk *exynos5_clkset_aclk_top_list[] = { [0] = &exynos5_clk_mout_mpll_user.clk, [1] = &exynos5_clk_mout_bpll_user.clk, }; -struct clksrc_sources exynos5_clkset_aclk = { +static struct clksrc_sources exynos5_clkset_aclk = { .sources = exynos5_clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list), }; @@ -486,12 +486,12 @@ static struct clksrc_clk exynos5_clk_aclk_400 = { .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, }; -struct clk *exynos5_clkset_aclk_333_166_list[] = { +static struct clk *exynos5_clkset_aclk_333_166_list[] = { [0] = &exynos5_clk_mout_cpll.clk, [1] = &exynos5_clk_mout_mpll_user.clk, }; -struct clksrc_sources exynos5_clkset_aclk_333_166 = { +static struct clksrc_sources exynos5_clkset_aclk_333_166 = { .sources = exynos5_clkset_aclk_333_166_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list), }; @@ -966,7 +966,7 @@ static struct clk exynos5_clk_fimd1 = { .ctrlbit = (1 << 0), }; -struct clk *exynos5_clkset_group_list[] = { +static struct clk *exynos5_clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = NULL, [2] = &exynos5_clk_sclk_hdmi24m, @@ -979,7 +979,7 @@ struct clk *exynos5_clkset_group_list[] = { [9] = &exynos5_clk_mout_cpll.clk, }; -struct clksrc_sources exynos5_clkset_group = { +static struct clksrc_sources exynos5_clkset_group = { .sources = exynos5_clkset_group_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list), }; @@ -1195,7 +1195,7 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = { .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, }; -struct clksrc_clk exynos5_clk_sclk_fimd1 = { +static struct clksrc_clk exynos5_clk_sclk_fimd1 = { .clk = { .name = "sclk_fimd", .devname = "exynos5-fb.1", @@ -1476,7 +1476,7 @@ static void exynos5_clock_resume(void) #define exynos5_clock_resume NULL #endif -struct syscore_ops exynos5_clock_syscore_ops = { +static struct syscore_ops exynos5_clock_syscore_ops = { .suspend = exynos5_clock_suspend, .resume = exynos5_clock_resume, }; diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 68b4b8e..e05f6cc 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -66,7 +66,7 @@ static void exynos5_map_io(void); static void exynos5440_map_io(void); static void exynos4_init_clocks(int xtal); static void exynos5_init_clocks(int xtal); -static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no); +static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); static int exynos_init(void); static struct cpu_table cpu_ids[] __initdata = { @@ -75,7 +75,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4210, }, { @@ -83,7 +83,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4212, }, { @@ -91,7 +91,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4412, }, { @@ -99,7 +99,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS5_SOC_MASK, .map_io = exynos5_map_io, .init_clocks = exynos5_init_clocks, - .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos5250, }, { @@ -277,25 +276,10 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_64K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_COMBINER_BASE, - .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S3C_VA_UART, .pfn = __phys_to_pfn(EXYNOS5_PA_UART), .length = SZ_512K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GIC_CPU, - .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU), - .length = SZ_8K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GIC_DIST, - .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST), - .length = SZ_4K, - .type = MT_DEVICE, }, }; @@ -413,23 +397,6 @@ static void __init exynos4_map_io(void) static void __init exynos5_map_io(void) { iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0); - s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1; - s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; - s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; - - s3c_sdhci_setname(0, "exynos4-sdhci"); - s3c_sdhci_setname(1, "exynos4-sdhci"); - s3c_sdhci_setname(2, "exynos4-sdhci"); - s3c_sdhci_setname(3, "exynos4-sdhci"); - - /* The I2C bus controllers are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - s3c_i2c2_setname("s3c2440-i2c"); - - s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) @@ -653,7 +620,8 @@ static void __init combiner_init(void __iomem *combiner_base, } #ifdef CONFIG_OF -int __init combiner_of_init(struct device_node *np, struct device_node *parent) +static int __init combiner_of_init(struct device_node *np, + struct device_node *parent) { void __iomem *combiner_base; @@ -792,7 +760,7 @@ static int __init exynos_init(void) /* uart registration process */ -static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) { struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; @@ -800,10 +768,7 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no) for (ucnt = 0; ucnt < no; ucnt++, tcfg++) tcfg->has_fracval = 1; - if (soc_is_exynos5250()) - s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no); - else - s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); + s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); } static void __iomem *exynos_eint_base; @@ -1035,14 +1000,7 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) struct irq_chip *chip = irq_get_chip(irq); chained_irq_enter(chip, desc); - chip->irq_mask(&desc->irq_data); - - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - generic_handle_irq(*irq_data); - - chip->irq_unmask(&desc->irq_data); chained_irq_exit(chip, desc); } diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index ae321c7..a1cb42c 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -14,9 +14,9 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/platform_data/asoc-s3c.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c.h> #include <mach/map.h> #include <mach/dma.h> diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c deleted file mode 100644 index 7903501..0000000 --- a/arch/arm/mach-exynos/dev-dwmci.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/arch/arm/mach-exynos4/dev-dwmci.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Platform device for Synopsys DesignWare Mobile Storage IP - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mmc/dw_mmc.h> - -#include <plat/devs.h> - -#include <mach/map.h> - -static int exynos4_dwmci_get_bus_wd(u32 slot_id) -{ - return 4; -} - -static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) -{ - return 0; -} - -static struct resource exynos4_dwmci_resource[] = { - [0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K), - [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI), -}; - -static struct dw_mci_board exynos4_dwci_pdata = { - .num_slots = 1, - .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, - .bus_hz = 80 * 1000 * 1000, - .detect_delay_ms = 200, - .init = exynos4_dwmci_init, - .get_bus_wd = exynos4_dwmci_get_bus_wd, -}; - -static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32); - -struct platform_device exynos4_device_dwmci = { - .name = "dw_mmc", - .id = -1, - .num_resources = ARRAY_SIZE(exynos4_dwmci_resource), - .resource = exynos4_dwmci_resource, - .dev = { - .dma_mask = &exynos4_dwmci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_dwci_pdata, - }, -}; - -void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd) -{ - struct dw_mci_board *npd; - - npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board), - &exynos4_device_dwmci); - - if (!npd->init) - npd->init = exynos4_dwmci_init; - if (!npd->get_bus_wd) - npd->get_bus_wd = exynos4_dwmci_get_bus_wd; -} diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c index 14ed795..4244d02 100644 --- a/arch/arm/mach-exynos/dev-ohci.c +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -12,10 +12,10 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/platform_data/usb-exynos.h> #include <mach/irqs.h> #include <mach/map.h> -#include <linux/platform_data/usb-exynos.h> #include <plat/devs.h> #include <plat/usb-phy.h> diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c index 2e85c02..7c42f4b 100644 --- a/arch/arm/mach-exynos/dev-uart.c +++ b/arch/arm/mach-exynos/dev-uart.c @@ -52,27 +52,3 @@ struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = { .nr_resources = ARRAY_SIZE(exynos4_uart3_resource), }, }; - -EXYNOS_UART_RESOURCE(5, 0) -EXYNOS_UART_RESOURCE(5, 1) -EXYNOS_UART_RESOURCE(5, 2) -EXYNOS_UART_RESOURCE(5, 3) - -struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = { - [0] = { - .resources = exynos5_uart0_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), - }, - [1] = { - .resources = exynos5_uart1_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), - }, - [2] = { - .resources = exynos5_uart2_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart2_resource), - }, - [3] = { - .resources = exynos5_uart3_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart3_resource), - }, -}; diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 21d568b..87e07d6 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -275,6 +275,9 @@ static int __init exynos_dma_init(void) exynos_pdma1_pdata.nr_valid_peri = ARRAY_SIZE(exynos4210_pdma1_peri); exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri; + + if (samsung_rev() == EXYNOS4210_REV_0) + exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1; } else if (soc_is_exynos4212() || soc_is_exynos4412()) { exynos_pdma0_pdata.nr_valid_peri = ARRAY_SIZE(exynos4212_pdma0_peri); diff --git a/arch/arm/mach-exynos/include/mach/dwmci.h b/arch/arm/mach-exynos/include/mach/dwmci.h deleted file mode 100644 index 7ce6574..0000000 --- a/arch/arm/mach-exynos/include/mach/dwmci.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Synopsys DesignWare Mobile Storage for EXYNOS4210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_DWMCI_H -#define __ASM_ARM_ARCH_DWMCI_H __FILE__ - -#include <linux/mmc/dw_mmc.h> - -extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd); - -#endif /* __ASM_ARM_ARCH_DWMCI_H */ diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index f43a96c..e0f0ae3 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -259,11 +259,6 @@ #define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48) #define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49) #define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50) -#define EXYNOS5_IRQ_UART0 IRQ_SPI(51) -#define EXYNOS5_IRQ_UART1 IRQ_SPI(52) -#define EXYNOS5_IRQ_UART2 IRQ_SPI(53) -#define EXYNOS5_IRQ_UART3 IRQ_SPI(54) -#define EXYNOS5_IRQ_UART4 IRQ_SPI(55) #define EXYNOS5_IRQ_IIC IRQ_SPI(56) #define EXYNOS5_IRQ_IIC1 IRQ_SPI(57) #define EXYNOS5_IRQ_IIC2 IRQ_SPI(58) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index aa3760e..61b74e1 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -91,6 +91,7 @@ #define EXYNOS4_PA_MDMA0 0x10810000 #define EXYNOS4_PA_MDMA1 0x12850000 +#define EXYNOS4_PA_S_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 #define EXYNOS5_PA_MDMA0 0x10800000 @@ -280,7 +281,6 @@ #define EXYNOS5_PA_UART1 0x12C10000 #define EXYNOS5_PA_UART2 0x12C20000 #define EXYNOS5_PA_UART3 0x12C30000 -#define EXYNOS5_SZ_UART SZ_256 #define EXYNOS5440_PA_UART0 0x000B0000 #define EXYNOS5440_PA_UART1 0x000C0000 diff --git a/arch/arm/mach-exynos/include/mach/regs-mem.h b/arch/arm/mach-exynos/include/mach/regs-mem.h deleted file mode 100644 index 0368b5a..0000000 --- a/arch/arm/mach-exynos/include/mach/regs-mem.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - SROMC and DMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_MEM_H -#define __ASM_ARCH_REGS_MEM_H __FILE__ - -#include <mach/map.h> - -#define S5P_DMC0_MEMCON_OFFSET 0x04 - -#define S5P_DMC0_MEMTYPE_SHIFT 8 -#define S5P_DMC0_MEMTYPE_MASK 0xF - -#endif /* __ASM_ARCH_REGS_MEM_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index c0b74f3..84428e7 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -231,8 +231,6 @@ /* For EXYNOS5 */ -#define EXYNOS5_USB_CFG S5P_PMUREG(0x0230) - #define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) #define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C) diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index c05d7aa..69359a0 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -25,7 +25,10 @@ #include <linux/mmc/host.h> #include <linux/fb.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mipi-csis.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> #include <drm/exynos_drm.h> #include <video/platform_lcd.h> @@ -45,14 +48,11 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/sdhci.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/mfc.h> #include <plat/fimc-core.h> #include <plat/camport.h> -#include <linux/platform_data/mipi-csis.h> #include <mach/map.h> @@ -113,7 +113,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE), - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 9adf491..485ce6c 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -23,7 +23,10 @@ #include <linux/mfd/max8997.h> #include <linux/lcd.h> #include <linux/rfkill-gpio.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> +#include <linux/platform_data/usb-exynos.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -36,8 +39,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> @@ -45,7 +46,6 @@ #include <plat/mfc.h> #include <plat/hdmi.h> -#include <linux/platform_data/usb-exynos.h> #include <mach/map.h> #include <drm/exynos_drm.h> diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index 730f1ac..ddb9263 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -21,6 +21,7 @@ #include <linux/pwm_backlight.h> #include <linux/regulator/machine.h> #include <linux/serial_core.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> @@ -34,7 +35,6 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> #include <plat/mfc.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index ee4fb1a..8dd6a1e 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -20,7 +20,10 @@ #include <linux/input.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> +#include <linux/platform_data/usb-exynos.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -35,16 +38,13 @@ #include <plat/fb.h> #include <plat/keypad.h> #include <plat/sdhci.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> #include <plat/mfc.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/hdmi.h> #include <mach/map.h> -#include <linux/platform_data/usb-exynos.h> #include <drm/exynos_drm.h> #include "common.h" diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index ebc9dd3..2d6bc83 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -23,6 +23,8 @@ #include <linux/i2c-gpio.h> #include <linux/i2c/mcs.h> #include <linux/i2c/atmel_mxt_ts.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mipi-csis.h> #include <linux/platform_data/s3c-hsotg.h> #include <drm/exynos_drm.h> @@ -35,7 +37,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/fb.h> #include <plat/mfc.h> @@ -43,7 +44,6 @@ #include <plat/fimc-core.h> #include <plat/s5p-time.h> #include <plat/camport.h> -#include <linux/platform_data/mipi-csis.h> #include <mach/map.h> @@ -754,7 +754,6 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 350e266..abeff25 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -8,6 +8,7 @@ config ARCH_INTEGRATOR_AP select MIGHT_HAVE_PCI select SERIAL_AMBA_PL010 select SERIAL_AMBA_PL010_CONSOLE + select SOC_BUS help Include support for the ARM(R) Integrator/AP and Integrator/PP2 platforms. @@ -19,6 +20,7 @@ config ARCH_INTEGRATOR_CP select PLAT_VERSATILE_CLCD select SERIAL_AMBA_PL011 select SERIAL_AMBA_PL011_CONSOLE + select SOC_BUS help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index c3ff21b..79197d8 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,6 +1,12 @@ #include <linux/amba/serial.h> -extern struct amba_pl010_data integrator_uart_data; +#ifdef CONFIG_ARCH_INTEGRATOR_AP +extern struct amba_pl010_data ap_uart_data; +#else +/* Not used without Integrator/AP support anyway */ +struct amba_pl010_data ap_uart_data {}; +#endif void integrator_init_early(void); int integrator_init(bool is_cp); void integrator_reserve(void); void integrator_restart(char, const char *); +void integrator_init_sysfs(struct device *parent, u32 id); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ea22a17..39c060f 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -18,10 +18,10 @@ #include <linux/memblock.h> #include <linux/sched.h> #include <linux/smp.h> -#include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/io.h> +#include <linux/stat.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -46,10 +46,10 @@ static AMBA_APB_DEVICE(rtc, "rtc", 0, INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); static AMBA_APB_DEVICE(uart0, "uart0", 0, - INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); + INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL); static AMBA_APB_DEVICE(uart1, "uart1", 0, - INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); + INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL); static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); @@ -77,6 +77,8 @@ int __init integrator_init(bool is_cp) uart1_device.periphid = 0x00041010; kmi0_device.periphid = 0x00041050; kmi1_device.periphid = 0x00041050; + uart0_device.dev.platform_data = &ap_uart_data; + uart1_device.dev.platform_data = &ap_uart_data; } for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { @@ -89,49 +91,6 @@ int __init integrator_init(bool is_cp) #endif -/* - * On the Integrator platform, the port RTS and DTR are provided by - * bits in the following SC_CTRLS register bits: - * RTS DTR - * UART0 7 6 - * UART1 5 4 - */ -#define SC_CTRLC __io_address(INTEGRATOR_SC_CTRLC) -#define SC_CTRLS __io_address(INTEGRATOR_SC_CTRLS) - -static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) -{ - unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; - u32 phybase = dev->res.start; - - if (phybase == INTEGRATOR_UART0_BASE) { - /* UART0 */ - rts_mask = 1 << 4; - dtr_mask = 1 << 5; - } else { - /* UART1 */ - rts_mask = 1 << 6; - dtr_mask = 1 << 7; - } - - if (mctrl & TIOCM_RTS) - ctrlc |= rts_mask; - else - ctrls |= rts_mask; - - if (mctrl & TIOCM_DTR) - ctrlc |= dtr_mask; - else - ctrls |= dtr_mask; - - __raw_writel(ctrls, SC_CTRLS); - __raw_writel(ctrlc, SC_CTRLC); -} - -struct amba_pl010_data integrator_uart_data = { - .set_mctrl = integrator_uart_set_mctrl, -}; - static DEFINE_RAW_SPINLOCK(cm_lock); /** @@ -169,3 +128,93 @@ void integrator_restart(char mode, const char *cmd) { cm_control(CM_CTRL_RESET, CM_CTRL_RESET); } + +static u32 integrator_id; + +static ssize_t intcp_get_manf(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%02x\n", integrator_id >> 24); +} + +static struct device_attribute intcp_manf_attr = + __ATTR(manufacturer, S_IRUGO, intcp_get_manf, NULL); + +static ssize_t intcp_get_arch(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + const char *arch; + + switch ((integrator_id >> 16) & 0xff) { + case 0x00: + arch = "ASB little-endian"; + break; + case 0x01: + arch = "AHB little-endian"; + break; + case 0x03: + arch = "AHB-Lite system bus, bi-endian"; + break; + case 0x04: + arch = "AHB"; + break; + default: + arch = "Unknown"; + break; + } + + return sprintf(buf, "%s\n", arch); +} + +static struct device_attribute intcp_arch_attr = + __ATTR(architecture, S_IRUGO, intcp_get_arch, NULL); + +static ssize_t intcp_get_fpga(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + const char *fpga; + + switch ((integrator_id >> 12) & 0xf) { + case 0x01: + fpga = "XC4062"; + break; + case 0x02: + fpga = "XC4085"; + break; + case 0x04: + fpga = "EPM7256AE (Altera PLD)"; + break; + default: + fpga = "Unknown"; + break; + } + + return sprintf(buf, "%s\n", fpga); +} + +static struct device_attribute intcp_fpga_attr = + __ATTR(fpga, S_IRUGO, intcp_get_fpga, NULL); + +static ssize_t intcp_get_build(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%02x\n", (integrator_id >> 4) & 0xFF); +} + +static struct device_attribute intcp_build_attr = + __ATTR(build, S_IRUGO, intcp_get_build, NULL); + + + +void integrator_init_sysfs(struct device *parent, u32 id) +{ + integrator_id = id; + device_create_file(parent, &intcp_manf_attr); + device_create_file(parent, &intcp_arch_attr); + device_create_file(parent, &intcp_fpga_attr); + device_create_file(parent, &intcp_build_attr); +} diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index e428f3a..9f82f9d 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,10 +21,9 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/io.h> +#include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> -#include <linux/clkdev.h> -#include <asm/hardware/icst.h> #include <mach/lm.h> #include <mach/impd1.h> #include <asm/sizes.h> @@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position"); struct impd1_module { void __iomem *base; - struct clk vcos[2]; - struct clk_lookup *clks[3]; -}; - -static const struct icst_params impd1_vco_params = { - .ref = 24000000, /* 24 MHz */ - .vco_max = ICST525_VCO_MAX_3V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 12, - .vd_max = 519, - .rd_min = 3, - .rd_max = 120, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static void impd1_setvco(struct clk *clk, struct icst_vco vco) -{ - struct impd1_module *impd1 = clk->data; - u32 val = vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, impd1->base + IMPD1_LOCK); - writel(val, clk->vcoreg); - writel(0, impd1->base + IMPD1_LOCK); - -#ifdef DEBUG - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 7; - - pr_debug("IM-PD1: VCO%d clock is %ld Hz\n", - vconr, icst525_hz(&impd1_vco_params, vco)); -#endif -} - -static const struct clk_ops impd1_clk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = impd1_setvco, }; void impd1_tweak_control(struct device *dev, u32 mask, u32 val) @@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = { } }; -static struct clk fixed_14745600 = { - .rate = 14745600, -}; - static int impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; @@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev) printk("IM-PD1 found at 0x%08lx\n", (unsigned long)dev->resource.start); - for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { - impd1->vcos[i].ops = &impd1_clk_ops, - impd1->vcos[i].owner = THIS_MODULE, - impd1->vcos[i].params = &impd1_vco_params, - impd1->vcos[i].data = impd1; - } - impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1; - impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2; - - impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000", - dev->id); - impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100", - dev->id); - impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200", - dev->id); - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_add(impd1->clks[i]); + integrator_impd1_clk_init(impd1->base, dev->id); for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { struct impd1_device *idev = impd1_devs + i; @@ -402,9 +342,10 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12); - d = amba_ahb_device_add(&dev->dev, devname, pc_base, SZ_4K, - dev->irq, dev->irq, - idev->platform_data, idev->id); + d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K, + dev->irq, dev->irq, + idev->platform_data, idev->id, + &dev->resource); if (IS_ERR(d)) { dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d)); continue; @@ -431,12 +372,9 @@ static int impd1_remove_one(struct device *dev, void *data) static void impd1_remove(struct lm_device *dev) { struct impd1_module *impd1 = lm_get_drvdata(dev); - int i; device_for_each_child(&dev->dev, NULL, impd1_remove_one); - - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_drop(impd1->clks[i]); + integrator_impd1_clk_exit(dev->id); lm_set_drvdata(dev, NULL); diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index efeac5d..be5859e 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -190,7 +190,6 @@ #define INTEGRATOR_SC_CTRLC_OFFSET 0x0C #define INTEGRATOR_SC_DEC_OFFSET 0x10 #define INTEGRATOR_SC_ARB_OFFSET 0x14 -#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 #define INTEGRATOR_SC_LOCK_OFFSET 0x1C #define INTEGRATOR_SC_BASE 0x11000000 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index e67a9fe..11e2a41 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -38,6 +38,9 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/stat.h> +#include <linux/sys_soc.h> +#include <linux/termios.h> #include <video/vga.h> #include <mach/hardware.h> @@ -59,7 +62,10 @@ #include "common.h" -/* +/* Base address to the AP system controller */ +void __iomem *ap_syscon_base; + +/* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx * is the (PA >> 12). * @@ -67,7 +73,6 @@ * just for now). */ #define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) -#define VA_SC_BASE __io_address(INTEGRATOR_SC_BASE) #define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) #define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) @@ -96,11 +101,6 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), .length = SZ_4K, @@ -121,11 +121,6 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), .length = SZ_4K, @@ -200,8 +195,6 @@ device_initcall(irq_syscore_init); /* * Flash handling. */ -#define SC_CTRLC (VA_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET) -#define SC_CTRLS (VA_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET) #define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) #define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) @@ -209,7 +202,8 @@ static int ap_flash_init(struct platform_device *dev) { u32 tmp; - writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC); + writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE; writel(tmp, EBI_CSR1); @@ -226,7 +220,8 @@ static void ap_flash_exit(struct platform_device *dev) { u32 tmp; - writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC); + writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE; writel(tmp, EBI_CSR1); @@ -240,9 +235,12 @@ static void ap_flash_exit(struct platform_device *dev) static void ap_flash_set_vpp(struct platform_device *pdev, int on) { - void __iomem *reg = on ? SC_CTRLS : SC_CTRLC; - - writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg); + if (on) + writel(INTEGRATOR_SC_CTRL_nFLVPPEN, + ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); + else + writel(INTEGRATOR_SC_CTRL_nFLVPPEN, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); } static struct physmap_flash_data ap_flash_data = { @@ -253,6 +251,45 @@ static struct physmap_flash_data ap_flash_data = { }; /* + * For the PL010 found in the Integrator/AP some of the UART control is + * implemented in the system controller and accessed using a callback + * from the driver. + */ +static void integrator_uart_set_mctrl(struct amba_device *dev, + void __iomem *base, unsigned int mctrl) +{ + unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + u32 phybase = dev->res.start; + + if (phybase == INTEGRATOR_UART0_BASE) { + /* UART0 */ + rts_mask = 1 << 4; + dtr_mask = 1 << 5; + } else { + /* UART1 */ + rts_mask = 1 << 6; + dtr_mask = 1 << 7; + } + + if (mctrl & TIOCM_RTS) + ctrlc |= rts_mask; + else + ctrls |= rts_mask; + + if (mctrl & TIOCM_DTR) + ctrlc |= dtr_mask; + else + ctrls |= dtr_mask; + + __raw_writel(ctrls, ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); + __raw_writel(ctrlc, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); +} + +struct amba_pl010_data ap_uart_data = { + .set_mctrl = integrator_uart_set_mctrl, +}; + +/* * Where is the timer (VA)? */ #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) @@ -449,9 +486,9 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, "rtc", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, - "uart0", &integrator_uart_data), + "uart0", &ap_uart_data), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, - "uart1", &integrator_uart_data), + "uart1", &ap_uart_data), OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, "kmi0", NULL), OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, @@ -464,12 +501,60 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { static void __init ap_init_of(void) { unsigned long sc_dec; + struct device_node *root; + struct device_node *syscon; + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + u32 ap_sc_id; + int err; int i; - of_platform_populate(NULL, of_default_bus_match_table, - ap_auxdata_lookup, NULL); + /* Here we create an SoC device for the root node */ + root = of_find_node_by_path("/"); + if (!root) + return; + syscon = of_find_node_by_path("/syscon"); + if (!syscon) + return; + + ap_syscon_base = of_iomap(syscon, 0); + if (!ap_syscon_base) + return; - sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); + ap_sc_id = readl(ap_syscon_base); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + err = of_property_read_string(root, "compatible", + &soc_dev_attr->soc_id); + if (err) + return; + err = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (err) + return; + soc_dev_attr->family = "Integrator"; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", + 'A' + (ap_sc_id & 0x0f)); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + + if (!IS_ERR_OR_NULL(parent)) + integrator_init_sysfs(parent, ap_sc_id); + + of_platform_populate(root, of_default_bus_match_table, + ap_auxdata_lookup, parent); + + sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; @@ -512,6 +597,27 @@ MACHINE_END #ifdef CONFIG_ATAGS /* + * For the ATAG boot some static mappings are needed. This will + * go away with the ATAG support down the road. + */ + +static struct map_desc ap_io_desc_atag[] __initdata = { + { + .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, +}; + +static void __init ap_map_io_atag(void) +{ + iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag)); + ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); + ap_map_io(); +} + +/* * This is where non-devicetree initialization code is collected and stashed * for eventual deletion. */ @@ -579,7 +685,7 @@ static void __init ap_init(void) platform_device_register(&cfi_flash_device); - sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); + sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; @@ -606,7 +712,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, .reserve = integrator_reserve, - .map_io = ap_map_io, + .map_io = ap_map_io_atag, .init_early = ap_init_early, .init_irq = ap_init_irq, .handle_irq = fpga_handle_irq, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index acecf04..7322838 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -27,6 +27,7 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/sys_soc.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -51,11 +52,13 @@ #include "common.h" +/* Base address to the CP controller */ +static void __iomem *intcp_con_base; + #define INTCP_PA_FLASH_BASE 0x24000000 #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CTRL_BASE __io_address(INTEGRATOR_CP_CTL_BASE) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1) @@ -82,11 +85,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), .length = SZ_4K, @@ -107,11 +105,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), .length = SZ_4K, @@ -126,11 +119,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE), .length = SZ_4K, .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE } }; @@ -146,9 +134,9 @@ static int intcp_flash_init(struct platform_device *dev) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); val |= CINTEGRATOR_FLASHPROG_FLWREN; - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); return 0; } @@ -157,21 +145,21 @@ static void intcp_flash_exit(struct platform_device *dev) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN); - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); } static void intcp_flash_set_vpp(struct platform_device *pdev, int on) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); if (on) val |= CINTEGRATOR_FLASHPROG_FLVPPEN; else val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN; - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); } static struct physmap_flash_data intcp_flash_data = { @@ -190,7 +178,7 @@ static struct physmap_flash_data intcp_flash_data = { static unsigned int mmc_status(struct device *dev) { unsigned int status = readl(__io_address(0xca000000 + 4)); - writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8)); + writel(8, intcp_con_base + 8); return status & 8; } @@ -318,9 +306,9 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, "rtc", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, - "uart0", &integrator_uart_data), + "uart0", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, - "uart1", &integrator_uart_data), + "uart1", NULL), OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, "kmi0", NULL), OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, @@ -338,8 +326,57 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { static void __init intcp_init_of(void) { - of_platform_populate(NULL, of_default_bus_match_table, - intcp_auxdata_lookup, NULL); + struct device_node *root; + struct device_node *cpcon; + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + u32 intcp_sc_id; + int err; + + /* Here we create an SoC device for the root node */ + root = of_find_node_by_path("/"); + if (!root) + return; + cpcon = of_find_node_by_path("/cpcon"); + if (!cpcon) + return; + + intcp_con_base = of_iomap(cpcon, 0); + if (!intcp_con_base) + return; + + intcp_sc_id = readl(intcp_con_base); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + err = of_property_read_string(root, "compatible", + &soc_dev_attr->soc_id); + if (err) + return; + err = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (err) + return; + soc_dev_attr->family = "Integrator"; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", + 'A' + (intcp_sc_id & 0x0f)); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + + if (!IS_ERR_OR_NULL(parent)) + integrator_init_sysfs(parent, intcp_sc_id); + + of_platform_populate(root, of_default_bus_match_table, + intcp_auxdata_lookup, parent); } static const char * intcp_dt_board_compat[] = { @@ -364,6 +401,28 @@ MACHINE_END #ifdef CONFIG_ATAGS /* + * For the ATAG boot some static mappings are needed. This will + * go away with the ATAG support down the road. + */ + +static struct map_desc intcp_io_desc_atag[] __initdata = { + { + .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, +}; + +static void __init intcp_map_io_atag(void) +{ + iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag)); + intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE); + intcp_map_io(); +} + + +/* * This is where non-devicetree initialization code is collected and stashed * for eventual deletion. */ @@ -502,7 +561,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, .reserve = integrator_reserve, - .map_io = intcp_map_io, + .map_io = intcp_map_io_atag, .init_early = intcp_init_early, .init_irq = intcp_init_irq, .handle_irq = fpga_handle_irq, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index bbeca59..be50e79 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -191,12 +191,9 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, /* * Trap out illegal values */ - if (offset > 255) - BUG(); - if (busnr > 255) - BUG(); - if (devfn > 255) - BUG(); + BUG_ON(offset > 255); + BUG_ON(busnr > 255); + BUG_ON(devfn > 255); if (busnr == 0) { int slot = PCI_SLOT(devfn); @@ -388,9 +385,10 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI __io_address(INTEGRATOR_SC_PCIENABLE) -#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20) -#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24) +static void __iomem *ap_syscon_base; +#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 +#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20 +#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24 static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -401,13 +399,13 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) char buf[128]; sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", - addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printk(KERN_DEBUG "%s", buf); #endif v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * If the instruction being executed was a read, @@ -449,15 +447,15 @@ static irqreturn_t v3_irq(int dummy, void *devid) sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, - __raw_readl(SC_LBFADDR), - __raw_readl(SC_LBFCODE) & 255, + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printascii(buf); #endif v3_writew(V3_PCI_STAT, 0xf000); v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); #ifdef CONFIG_DEBUG_LL /* @@ -480,6 +478,10 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) + return -EINVAL; } return ret; @@ -568,7 +570,7 @@ void __init pci_v3_preinit(void) v3_writeb(V3_LB_ISTAT, 0); v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); v3_writeb(V3_LB_IMASK, 0x28); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * Grab the PCI error interrupt. diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 1694f01..6d6bde3 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void) * Enable the IO window to be way up high, at 0xfffffc00 */ local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); + local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ } else { printk("PCI: IXP4xx is target - No bus scan performed\n"); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fdf91a1..8c0c0e2 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -67,15 +67,12 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE - }, -#ifdef CONFIG_DEBUG_LL - { /* Debug UART mapping */ - .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), - .length = IXP4XX_DEBUG_UART_REGION_SIZE, + }, { /* Queue Manager */ + .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), + .length = IXP4XX_QMGR_REGION_SIZE, .type = MT_DEVICE - } -#endif + }, }; void __init ixp4xx_map_io(void) diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index b800a03..53b8348 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -15,6 +15,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/pci.h> +#include <asm/system_info.h> #define SLOT_ETHA 0x0B /* IDSEL = AD21 */ #define SLOT_ETHB 0x0C /* IDSEL = AD20 */ @@ -329,7 +330,7 @@ static struct platform_device device_hss_tab[] = { }; -static struct platform_device *device_tab[6] __initdata = { +static struct platform_device *device_tab[7] __initdata = { &device_flash, /* index 0 */ }; diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 8c9f8d5..ff686cb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -17,8 +17,8 @@ #else mov \rp, #0 #endif - orr \rv, \rp, #0xff000000 @ virtual - orr \rv, \rv, #0x00b00000 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00f00000 orr \rp, \rp, #0xc8000000 @ physical .endm diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index eb68b61..c5bae9c 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -30,51 +30,43 @@ * * 0x50000000 0x10000000 ioremap'd EXP BUS * - * 0x6000000 0x00004000 ioremap'd QMgr + * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG + * 0xC0000000 0x00001000 0xFEF13000 PCI CFG * - * 0xC4000000 0x00001000 0xffbfe000 EXP CFG + * 0xC4000000 0x00001000 0xFEF14000 EXP CFG * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals + * 0x60000000 0x00004000 0xFEF15000 QMgr */ /* * Queue Manager */ -#define IXP4XX_QMGR_BASE_PHYS (0x60000000) -#define IXP4XX_QMGR_REGION_SIZE (0x00004000) +#define IXP4XX_QMGR_BASE_PHYS 0x60000000 +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) +#define IXP4XX_QMGR_REGION_SIZE 0x00004000 /* - * Expansion BUS Configuration registers + * Peripheral space, including debug UART. Must be section-aligned so that + * it can be used with the low-level debug code. */ -#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000) -#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) +#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000) +#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 /* * PCI Config registers */ -#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000) -#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) +#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000) +#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 /* - * Debug UART - * - * This is basically a remap of UART1 into a region that is section - * aligned so that it * can be used with the low-level debug code. + * Expansion BUS Configuration registers */ -#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000) -#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) +#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 +#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000 +#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 9e7cad2..4de8da5 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue); static inline void qmgr_put_entry(unsigned int queue, u32 val) { - extern struct qmgr_regs __iomem *qmgr_regs; + struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val) static inline u32 qmgr_get_entry(unsigned int queue) { u32 val; - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; val = __raw_readl(&qmgr_regs->acc[queue][0]); #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue) static inline int __qmgr_get_stat1(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } static inline int __qmgr_get_stat2(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; @@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue) */ static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statne_h) >> (queue - HALF_QUEUES)) & 0x01; @@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue) */ static inline int qmgr_stat_full(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statf_h) >> (queue - HALF_QUEUES)) & 0x01; diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h index 80d6da2..7bd8b96 100644 --- a/arch/arm/mach-ixp4xx/include/mach/udc.h +++ b/arch/arm/mach-ixp4xx/include/mach/udc.h @@ -2,7 +2,7 @@ * arch/arm/mach-ixp4xx/include/mach/udc.h * */ -#include <asm/mach/udc_pxa2xx.h> +#include <linux/platform_data/pxa2xx_udc.h> extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index a17ed79..d4eb09a 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -116,7 +116,11 @@ /* NPE mailbox_status value for reset */ #define RESET_MBOX_STAT 0x0000F0F0 -const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" }; +#define NPE_A_FIRMWARE "NPE-A" +#define NPE_B_FIRMWARE "NPE-B" +#define NPE_C_FIRMWARE "NPE-C" + +const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; #define print_npe(pri, npe, fmt, ...) \ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) @@ -724,6 +728,9 @@ module_exit(npe_cleanup_module); MODULE_AUTHOR("Krzysztof Halasa"); MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(NPE_A_FIRMWARE); +MODULE_FIRMWARE(NPE_B_FIRMWARE); +MODULE_FIRMWARE(NPE_C_FIRMWARE); EXPORT_SYMBOL(npe_names); EXPORT_SYMBOL(npe_running); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index 852f7c9..9d1b6b7 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -14,7 +14,7 @@ #include <linux/module.h> #include <mach/qmgr.h> -struct qmgr_regs __iomem *qmgr_regs; +static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ @@ -293,12 +293,6 @@ static int qmgr_init(void) if (mem_res == NULL) return -EBUSY; - qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - if (qmgr_regs == NULL) { - err = -ENOMEM; - goto error_map; - } - /* reset qmgr registers */ for (i = 0; i < 4; i++) { __raw_writel(0x33333333, &qmgr_regs->stat1[i]); @@ -347,8 +341,6 @@ static int qmgr_init(void) error_irq2: free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: - iounmap(qmgr_regs); -error_map: release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); return err; } @@ -359,7 +351,6 @@ static void qmgr_remove(void) free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); synchronize_irq(IRQ_IXP4XX_QM2); - iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } @@ -369,7 +360,6 @@ module_exit(qmgr_remove); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Krzysztof Halasa"); -EXPORT_SYMBOL(qmgr_regs); EXPORT_SYMBOL(qmgr_set_irq); EXPORT_SYMBOL(qmgr_enable_irq); EXPORT_SYMBOL(qmgr_disable_irq); diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c index f2fbb02..6912882 100644 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -16,21 +16,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 20af53a..8a8ebe0 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -13,23 +13,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d94872f..e75fbdb 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -26,7 +26,7 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { { } }; -struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { +static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), @@ -98,7 +98,7 @@ static void __init kirkwood_dt_init(void) kirkwood_auxdata_lookup, NULL); } -static const char *kirkwood_dt_board_compat[] = { +static const char * const kirkwood_dt_board_compat[] = { "globalscale,dreamplug", "dlink,dns-320", "dlink,dns-325", diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c index 001ca8c..5dcd0d6 100644 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -18,21 +18,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index cfc47f8..6d3a564 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -13,15 +13,9 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index d084b1e..24f5aa7 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -10,16 +10,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c index 158fb97..e4ed62c 100644 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -10,10 +10,8 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 83d8975..64e5cc6 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -14,17 +14,9 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/gpio-fan.h> -#include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 1750e68..f3bfeda 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -19,9 +19,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 2c6c218..f0fc25b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -18,10 +18,10 @@ #include <linux/clk-provider.h> #include <linux/spinlock.h> #include <linux/mv643xx_i2c.h> +#include <linux/timex.h> +#include <linux/kexec.h> #include <net/dsa.h> #include <asm/page.h> -#include <asm/timex.h> -#include <asm/kexec.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/kirkwood.h> @@ -425,7 +425,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) /***************************************************************************** * SPI ****************************************************************************/ -void __init kirkwood_spi_init() +void __init kirkwood_spi_init(void) { orion_spi_init(SPI_PHYS_BASE); } @@ -646,8 +646,7 @@ void __init kirkwood_l2_init(void) void __init kirkwood_init(void) { - printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", - kirkwood_id(), kirkwood_tclk); + pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); /* * Disable propagation of mbus errors to the CPU local bus, @@ -671,7 +670,7 @@ void __init kirkwood_init(void) kirkwood_xor1_init(); kirkwood_crypto_init(); -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; #endif } diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index bcffd7c..6088e92 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -47,7 +47,8 @@ void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); -void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); +void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, + int (*dev_ready)(struct mtd_info *)); void kirkwood_audio_init(void); void kirkwood_restart(char, const char *); void kirkwood_clk_init(void); diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index 0f17109..f730467 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void) cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { - printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); + pr_err("kirkwood_init_cpuidle: Failed registering\n"); return -EIO; } return 0; diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index 23dcb19..791a98f 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -93,7 +93,7 @@ static void __init dockstar_init(void) if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) - printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); kirkwood_ehci_init(); kirkwood_ge00_init(&dockstar_ge00_data); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 8847035..2a97a2e 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -14,6 +14,7 @@ #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include "common.h" static int __initdata gpio0_irqs[4] = { IRQ_KIRKWOOD_GPIO_LOW_0_7, diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c index 285edab..4894959 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -19,6 +19,7 @@ #include <mach/irqs.h> #include <plat/time.h> #include "common.h" +#include "lacie_v2-common.h" /***************************************************************************** * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 0c6ad63..827cde4 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void) if (dev == MV88F6180_DEV_ID) return MPP_F6180_MASK; - printk(KERN_ERR "MPP setup: unknown kirkwood variant " - "(dev %#x rev %#x)\n", dev, rev); + pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n", + dev, rev); return 0; } diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 88b0788..728e86d 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = { .name = "gpio-keys", .id = -1, .dev = { - .platform_data = &netspace_v2_button_data, + .platform_data = &netspace_v2_button_data, }, }; @@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = { MPP29_GPIO, /* Blue led (slow register) */ MPP30_GPIO, /* Blue led (command register) */ MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ MPP33_GPO, /* Fan speed (bit 2) */ 0 }; diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 134ef50..7e81e9b 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void) kirkwood_mpp_conf(openrd_uart1_mpp_config); if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 selection" - ", gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); return -EIO; } if (gpio_request(28, "RS232_RS485_SEL")) { - printk(KERN_ERR "GPIO request failed for RS232/RS485 selection" - ", gpio# 28\n"); + pr_err("GPIO request 28 failed for RS232/RS485 selection\n"); gpio_free(34); return -EIO; } @@ -185,15 +183,13 @@ static void __init openrd_init(void) if (uart1 <= 0) { if (uart1 < 0) - printk(KERN_ERR "Invalid kernel parameter to select " - "UART1. Defaulting to SD. ERROR CODE: %d\n", - uart1); + pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n", + uart1); /* Select SD * Pin # 34: 0 => UART1, 1 => SD */ if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 " - "selection, gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); } else { gpio_direction_output(34, 1); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ec54491..ef10264 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port) clk = clk_get_sys("pcie", port); if (IS_ERR(clk)) { - printk(KERN_ERR "PCIE clock %s missing\n", port); + pr_err("PCIE clock %s missing\n", port); return; } clk_prepare_enable(clk); @@ -168,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 0; index = pcie_port_map[nr]; - printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index); + pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index); pp = kzalloc(sizeof(*pp), GFP_KERNEL); if (!pp) @@ -186,7 +186,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) case 1: kirkwood_enable_pcie_clk("1"); pcie1_ioresources_init(pp); - pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE); + pci_ioremap_io(SZ_64K * sys->busnr, + KIRKWOOD_PCIE1_IO_PHYS_BASE); break; default: panic("PCIe setup: invalid controller %d", index); @@ -207,14 +208,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } +/* + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it + * is operating as a root complex this needs to be switched to + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on + * the device. Decoding setup is handled by the orion code. + */ static void __devinit rc_pci_fixup(struct pci_dev *dev) { - /* - * Prevent enumeration of root complex. - */ if (dev->bus->parent == NULL && dev->devfn == 0) { int i; + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; @@ -224,22 +230,6 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); -static struct pci_bus __init * -kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_bus *bus; - - if (nr < num_pcie_ports) { - bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, - &sys->resources); - } else { - bus = NULL; - BUG(); - } - - return bus; -} - static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -251,19 +241,19 @@ static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, static struct hw_pci kirkwood_pci __initdata = { .setup = kirkwood_pcie_setup, - .scan = kirkwood_pcie_scan_bus, .map_irq = kirkwood_pcie_map_irq, + .ops = &pcie_ops, }; static void __init add_pcie_port(int index, void __iomem *base) { - printk(KERN_INFO "Kirkwood PCIe port %d: ", index); + pr_info("Kirkwood PCIe port %d: ", index); if (orion_pcie_link_up(base)) { - printk(KERN_INFO "link up\n"); + pr_info("link up\n"); pcie_port_map[num_pcie_ports++] = index; } else - printk(KERN_INFO "link down, ignoring\n"); + pr_info("link down, ignoring\n"); } void __init kirkwood_pcie_init(unsigned int portmask) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 28d0aba..8a17594 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -117,7 +117,7 @@ static void __init sheevaplug_init(void) if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) - printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); kirkwood_ehci_init(); kirkwood_ge00_init(&sheevaplug_ge00_data); diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index bad738e..f2daf71 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -29,7 +29,7 @@ #include "common.h" #include "mpp.h" -struct mtd_partition hp_t5325_partitions[] = { +static struct mtd_partition hp_t5325_partitions[] = { { .name = "u-boot env", .size = SZ_64K, @@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = { }, }; -const struct flash_platform_data hp_t5325_flash = { +static const struct flash_platform_data hp_t5325_flash = { .type = "mx25l8005", .name = "spi_flash", .parts = hp_t5325_partitions, .nr_parts = ARRAY_SIZE(hp_t5325_partitions), }; -struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { +static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &hp_t5325_flash, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 367a940..e4c6127 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -170,8 +170,7 @@ static int __init ts41x_pci_init(void) else kirkwood_pcie_init(KW_PCIE0); } - - return 0; + return 0; } subsys_initcall(ts41x_pci_init); diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index 8943ede..cec87ce 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -7,6 +7,7 @@ #include <linux/serial_reg.h> #include <mach/kirkwood.h> #include "common.h" +#include "tsx1x-common.h" /* * QNAP TS-x1x Boards flash @@ -29,7 +30,7 @@ * ***************************************************************************/ -struct mtd_partition qnap_tsx1x_partitions[] = { +static struct mtd_partition qnap_tsx1x_partitions[] = { { .name = "U-Boot", .size = 0x00080000, @@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = { }, }; -const struct flash_platform_data qnap_tsx1x_flash = { +static const struct flash_platform_data qnap_tsx1x_flash = { .type = "m25p128", .name = "spi_flash", .parts = qnap_tsx1x_partitions, .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions), }; -struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { +static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &qnap_tsx1x_flash, diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index bfa1eab..22ef8a1 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -24,6 +24,7 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/hardware/vic.h> #include <asm/sizes.h> #include <asm/mach-types.h> @@ -32,9 +33,7 @@ #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <plat/gpio-nomadik.h> #include <plat/mtu.h> -#include <plat/pincfg.h> #include <linux/platform_data/mtd-nomadik-nand.h> #include <mach/fsmc.h> diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index b617eae..1273931 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -26,8 +26,8 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index 6d14454..0c2f662 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -4,8 +4,7 @@ #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> #include <linux/platform_device.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> +#include <linux/platform_data/pinctrl-nomadik.h> /* * There are two busses in the 8815NHK. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index cd169c3..f0e69cb 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ + serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index e255164..a8fce3c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .atag_offset = 0x100, .map_io = ams_delta_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 4b6de70..e067f22 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -27,16 +27,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> #include <mach/flash.h> -#include <plat/fpga.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" /* fsample is pretty close to p2-sample */ @@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = { static void __init fsample_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .atag_offset = 0x100, .map_io = omap_fsample_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 4ec579f..608e7d2 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index e1362ce..7119ef2 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -13,12 +13,11 @@ */ #include <linux/gpio.h> #include <linux/platform_device.h> - +#include <linux/platform_data/gpio-omap.h> #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h2.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 376f7f2..9134b64 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,8 +39,8 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> #include <mach/flash.h> @@ -50,6 +50,7 @@ #include "common.h" #include "board-h2.h" +#include "dma.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 @@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h2_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index c74daac..17d7791 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,9 +16,8 @@ #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h3.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ededdb7..bf213d1 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -41,9 +41,9 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/flash.h> #include <mach/hardware.h> @@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h3_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 87ab208..356f816 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -43,7 +43,7 @@ #include <asm/mach/arch.h> #include <mach/omap7xx.h> -#include <plat/mmc.h> +#include "mmc.h" #include <mach/irqs.h> #include <mach/usb.h> @@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald") .atag_offset = 0x100, .map_io = htcherald_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index db5f7d2..f8033fa 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -33,16 +33,15 @@ #include <mach/mux.h> #include <mach/flash.h> -#include <plat/fpga.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/mmc.h> #include <mach/hardware.h> #include <mach/usb.h> #include "iomap.h" #include "common.h" +#include "mmc.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 @@ -215,7 +214,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { static int innovator_get_pendown_state(void) { - return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); + return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); } static const struct ads7846_platform_data innovator1510_ts_info = { @@ -279,7 +278,7 @@ static struct platform_device *innovator1610_devices[] __initdata = { static void __init innovator_init_smc91x(void) { if (cpu_is_omap1510()) { - fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1, + __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, OMAP1510_FPGA_RST); udelay(750); } else { @@ -335,10 +334,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { if (power_on) - fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), OMAP1510_FPGA_POWER); else - fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), OMAP1510_FPGA_POWER); return 0; @@ -390,14 +389,14 @@ static void __init innovator_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); @@ -437,6 +436,7 @@ static void __init innovator_init(void) */ static void __init innovator_map_io(void) { +#ifdef CONFIG_ARCH_OMAP15XX omap15xx_map_io(); iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); @@ -444,9 +444,10 @@ static void __init innovator_map_io(void) /* Dump the Innovator FPGA rev early - useful info for support. */ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - fpga_read(OMAP1510_FPGA_REV_HIGH), - fpga_read(OMAP1510_FPGA_REV_LOW), - fpga_read(OMAP1510_FPGA_BOARD_REV)); + __raw_readb(OMAP1510_FPGA_REV_HIGH), + __raw_readb(OMAP1510_FPGA_REV_LOW), + __raw_readb(OMAP1510_FPGA_BOARD_REV)); +#endif } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") @@ -454,7 +455,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .atag_offset = 0x100, .map_io = innovator_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = innovator_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7d5c06d..3e8ead6 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -29,13 +29,13 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/mmc.h> -#include <plat/clock.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "clock.h" +#include "mmc.h" #define ADS7846_PENDOWN_GPIO 15 @@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5973945..872ea47 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -48,7 +48,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = osk_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 1c578d5..584b6fa 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -36,8 +36,8 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> -#include <plat/dma.h> +#include <mach/tc.h> +#include <plat-omap/dma-omap.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 @@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 9715809..fbc986b 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -28,16 +28,16 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/platform_data/leds-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/led.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e311032..60d917a 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -38,8 +38,8 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -47,6 +47,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 198b054..9a7e483 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -28,15 +28,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/fpga.h> #include <mach/flash.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), @@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = { static void __init perseus2_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .atag_offset = 0x100, .map_io = omap_perseus2_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 5932d56..4fcf19c 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -16,9 +16,10 @@ #include <linux/platform_device.h> #include <mach/hardware.h> -#include <plat/mmc.h> #include <mach/board-sx1.h> +#include "mmc.h" + #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 13bf2cc..1ebc7e0 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -36,15 +36,16 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/irda.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/board-sx1.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "dma.h" /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) @@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index ad75e34..abf705f 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -34,7 +34,7 @@ #include <mach/board-voiceblue.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 638f407..4f5fd4a 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -21,21 +22,21 @@ #include <asm/mach-types.h> -#include <plat/cpu.h> -#include <plat/usb.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/clkdev_omap.h> - #include <mach/hardware.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "opp.h" +#include "sram.h" __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + /* * Omap1 specific clock functions */ @@ -607,3 +608,497 @@ void omap1_clk_disable_unused(struct clk *clk) } #endif + + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + pr_err("Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + + omap1_clk_disable(clk); + +out: + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * Optional clock functions defined in include/linux/clk.h + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_set_rate(clk, rate); + if (ret == 0) + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); + + return -EINVAL; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * OMAP specific clock functions shared between omap1 and omap2 + */ + +int __initdata mpurate; + +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) +{ + get_option(&str, &mpurate); + + if (!mpurate) + return 1; + + if (mpurate < 1000) + mpurate *= 1000000; + + return 1; +} +__setup("mpurate=", omap_clk_setup); + +/* Used for clocks that always have same value as the parent clock */ +unsigned long followparent_recalc(struct clk *clk) +{ + return clk->parent->rate; +} + +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +unsigned long omap_fixed_divisor_recalc(struct clk *clk) +{ + WARN_ON(!clk->fixed_div); + + return clk->parent->rate / clk->fixed_div; +} + +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + +/* Propagate rate to children */ +void propagate_rate(struct clk *tclk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +static LIST_HEAD(root_clks); + +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + + list_add(&clk->node, &clocks); + if (clk->init) + clk->init(clk); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->sibling); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); +} + +/** + * omap_clk_get_by_name - locate OMAP struct clk by its name + * @name: name of the struct clk to locate + * + * Locate an OMAP struct clk by its name. Assumes that struct clk + * names are unique. Returns NULL if not found or a pointer to the + * struct clk if found. + */ +struct clk *omap_clk_get_by_name(const char *name) +{ + struct clk *c; + struct clk *ret = NULL; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(c, &clocks, node) { + if (!strcmp(c->name, name)) { + ret = c; + break; + } + } + + mutex_unlock(&clocks_mutex); + + return ret; +} + +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + +/* + * Dummy clock + * + * Used for clock aliases that are needed on some OMAPs, but not others + */ +struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_null, +}; + +/* + * + */ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); + list_for_each_entry(ck, &clocks, node) { + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || !ck->enable_reg) + continue; + + omap1_clk_disable_unused(ck); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) +/* + * debugfs support to trace clock tree hierarchy and attributes + */ + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static struct dentry *clk_debugfs_root; + +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + mutex_lock(&clocks_mutex); + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, + c->usecount); + } + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int clk_debugfs_register_one(struct clk *c) +{ + int err; + struct dentry *d; + struct clk *pa = c->parent; + + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); + if (!d) + return -ENOMEM; + c->dent = d; + + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + if (!d) { + err = -ENOMEM; + goto err_out; + } + return 0; + +err_out: + debugfs_remove_recursive(c->dent); + return err; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent; + + if (pa && !pa->dent) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (!c->dent) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clocks, node) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} +late_initcall(clk_debugfs_init); + +#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 3d04f4f..1e4918a 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -14,8 +14,184 @@ #define __ARCH_ARM_MACH_OMAP1_CLOCK_H #include <linux/clk.h> +#include <linux/list.h> -#include <plat/clock.h> +#include <linux/clkdev.h> + +struct module; +struct clk; + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) /* 7xx, 850 */ +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ +#define CK_1710 (1 << 4) /* 1710 extra for rate selection */ + + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + u8 rate_offset; + u8 src_offset; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; int omap1_clk_init(void); void omap1_clk_late_init(void); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 9b45f4b..cb7c6ae 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -22,16 +22,14 @@ #include <asm/mach-types.h> /* for machine_is_* */ -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/clkdev_omap.h> -#include <plat/sram.h> /* for omap_sram_reprogram_clock() */ +#include "soc.h" #include <mach/hardware.h> #include <mach/usb.h> /* for OTG_BASE */ #include "iomap.h" #include "clock.h" +#include "sram.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ #define IDL_CLKOUT_ARM_SHIFT 12 @@ -765,14 +763,6 @@ static struct omap_clk omap_clks[] = { * init */ -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - static void __init omap1_show_rates(void) { pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", @@ -803,8 +793,6 @@ int __init omap1_clk_init(void) if (!cpu_is_omap15xx()) omap_writew(0, SOFT_REQ_REG2); - clk_init(&omap1_clk_functions); - /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index c2552b2..b53e085 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -26,8 +26,10 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include <plat/common.h> #include <linux/mtd/mtd.h> +#include <linux/i2c-omap.h> + +#include <plat/i2c.h> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); @@ -38,6 +40,7 @@ static inline void omap7xx_map_io(void) #endif #ifdef CONFIG_ARCH_OMAP15XX +void omap1510_fpga_init_irq(void); void omap15xx_map_io(void); #else static inline void omap15xx_map_io(void) @@ -90,4 +93,6 @@ extern int ocpi_enable(void); static inline int ocpi_enable(void) { return 0; } #endif +extern u32 omap1_get_reset_sources(void); + #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index d3fec92..0af635205 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -17,12 +17,12 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/platform_data/omap-wd-timer.h> + #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/mmc.h> #include <mach/omap7xx.h> #include <mach/camera.h> @@ -30,6 +30,9 @@ #include "common.h" #include "clock.h" +#include "dma.h" +#include "mmc.h" +#include "sram.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) @@ -175,6 +178,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[3].name = "tx"; res[3].flags = IORESOURCE_DMA; + if (cpu_is_omap7xx()) + data->slots[0].features = MMC_OMAP7XX; + if (cpu_is_omap15xx()) + data->slots[0].features = MMC_OMAP15XX; + if (cpu_is_omap16xx()) + data->slots[0].features = MMC_OMAP16XX; + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret == 0) ret = platform_device_add_data(pdev, data, sizeof(*data)); @@ -439,18 +449,31 @@ static struct resource wdt_resources[] = { }; static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, + .name = "omap_wdt", + .id = -1, .num_resources = ARRAY_SIZE(wdt_resources), .resource = wdt_resources, }; static int __init omap_init_wdt(void) { + struct omap_wd_timer_platform_data pdata; + int ret; + if (!cpu_is_omap16xx()) return -ENODEV; - return platform_device_register(&omap_wdt_device); + pdata.read_reset_sources = omap1_get_reset_sources; + + ret = platform_device_register(&omap_wdt_device); + if (!ret) { + ret = platform_device_add_data(&omap_wdt_device, &pdata, + sizeof(pdata)); + if (ret) + platform_device_del(&omap_wdt_device); + } + + return ret; } subsys_initcall(omap_init_wdt); #endif diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 29007fe..978aed8 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,11 +25,13 @@ #include <linux/device.h> #include <linux/io.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> +#include <mach/tc.h> #include <mach/irqs.h> +#include "dma.h" + #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 #define OMAP1_DMA_STRIDE 0x40 @@ -319,6 +321,9 @@ static int __init omap1_system_dma_init(void) d->dev_caps = ENABLE_1510_MODE; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + if (cpu_is_omap16xx()) + d->dev_caps = ENABLE_16XX_MODE; + d->dev_caps |= SRC_PORT; d->dev_caps |= DST_PORT; d->dev_caps |= SRC_INDEX; diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h new file mode 100644 index 0000000..da6345d --- /dev/null +++ b/arch/arm/mach-omap1/dma.h @@ -0,0 +1,83 @@ +/* + * OMAP1 DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP1_DMA_CHANNEL_H +#define __OMAP1_DMA_CHANNEL_H + +/* DMA channels for omap1 */ +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + +#endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 73ae616..b3fb531 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -10,7 +10,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 29ec50f..8bd71b2 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,11 +27,11 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <plat/fpga.h> - #include <mach/hardware.h> #include "iomap.h" +#include "common.h" +#include "fpga.h" static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h new file mode 100644 index 0000000..4b4307a --- /dev/null +++ b/arch/arm/mach-omap1/fpga.h @@ -0,0 +1,52 @@ +/* + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) + +#endif diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 98e6f39..02b3eb2 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 33f4192..b9952a2 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 958ce9a..f5819b2 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index a0551a6..faca808 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -19,11 +19,25 @@ * */ -#include <plat/i2c.h> +#include <linux/i2c-omap.h> #include <mach/mux.h> -#include <plat/cpu.h> +#include "soc.h" + +#include <plat/i2c.h> + +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP1_INT_I2C (32 + 4) + +static const char name[] = "omap_i2c"; -void __init omap1_i2c_mux_pins(int bus_id) +static struct resource i2c_resources[2] = { +}; + +static struct platform_device omap_i2c_devices[1] = { +}; + +static void __init omap1_i2c_mux_pins(int bus_id) { if (cpu_is_omap7xx()) { omap_cfg_reg(I2C_7XX_SDA); @@ -33,3 +47,47 @@ void __init omap1_i2c_mux_pins(int bus_id) omap_cfg_reg(I2C_SCL); } } + +int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, + int bus_id) +{ + struct platform_device *pdev; + struct resource *res; + + if (bus_id > 1) + return -EINVAL; + + omap1_i2c_mux_pins(bus_id); + + pdev = &omap_i2c_devices[bus_id - 1]; + pdev->id = bus_id; + pdev->name = name; + pdev->num_resources = ARRAY_SIZE(i2c_resources); + res = i2c_resources; + res[0].start = OMAP1_I2C_BASE; + res[0].end = res[0].start + OMAP_I2C_SIZE; + res[0].flags = IORESOURCE_MEM; + res[1].start = OMAP1_INT_I2C; + res[1].flags = IORESOURCE_IRQ; + pdev->resource = res; + + /* all OMAP1 have IP version 1 register set */ + pdata->rev = OMAP_I2C_IP_VERSION_1; + + /* all OMAP1 I2C are implemented like this */ + pdata->flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; + + /* how the cpu bus is wired up differs for 7xx only */ + + if (cpu_is_omap7xx()) + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; + else + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; + + pdev->dev.platform_data = pdata; + + return platform_device_register(pdev); +} diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index a1b846a..52de382 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <asm/system_info.h> -#include <plat/cpu.h> +#include "soc.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 2b36a28..5c1a26c 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <plat/serial.h> +#include "serial.h" .pushsection .data omap_uart_phys: .word 0x0 diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index 88f08ca..78a8c6c 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -13,8 +13,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include "../../iomap.h" - .macro get_irqnr_preamble, base, tmp .endm diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h deleted file mode 100644 index ebf86c0..0000000 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 84248d2..5875a50 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -39,7 +39,7 @@ #include <asm/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include <plat/cpu.h> +#include <mach/soc.h> /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these @@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa); extern void omap_writew(u16 v, u32 pa); extern void omap_writel(u32 v, u32 pa); -#include <plat/tc.h> +#include <mach/tc.h> /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -72,7 +72,10 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ -#include <plat/serial.h> +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +#include <mach/serial.h> /* * --------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 901082d..3c25305 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -19,7 +19,7 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include <plat/cpu.h> +#include <mach/soc.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h index 8fe05d6..3d23524 100644 --- a/arch/arm/mach-omap1/include/mach/omap1510.h +++ b/arch/arm/mach-omap1/include/mach/omap1510.h @@ -45,5 +45,118 @@ #define OMAP1510_DSP_MMU_BASE (0xfffed200) +/* + * --------------------------------------------------------------------------- + * OMAP-1510 FPGA + * --------------------------------------------------------------------------- + */ +#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ + +/* Revision */ +#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) +#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) + +/* Interrupt status */ +#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) + +/* Interrupt mask */ +#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) + +/* Reset registers */ +#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) +#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) +#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) + +#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) + +/* + * Power up Giga UART driver, turn on HID clock. + * Turn off BT power, since we're not using it and it + * draws power. + */ +#define OMAP1510_FPGA_RESET_VALUE 0x42 + +#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) +#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) +#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) +#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) +#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) +#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) +#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) +#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) + +/* + * Innovator/OMAP1510 FPGA HID register bit definitions + */ +#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ +#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ +#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ +#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ +#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ +#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ +#define OMAP1510_FPGA_HID_rsrvd (1<<6) +#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ + +/* The FPGA IRQ is cascaded through GPIO_13 */ +#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) + +/* IRQ Numbers for interrupts muxed through the FPGA */ +#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) + #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h new file mode 100644 index 0000000..2ce6a2d --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/serial.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#include <linux/init.h> + +/* + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO_OFS 0x3ffc + +/* OMAP1 serial ports */ +#define OMAP1_UART1_BASE 0xfffb0000 +#define OMAP1_UART2_BASE 0xfffb0800 +#define OMAP1_UART3_BASE 0xfffb9800 + +#define OMAP_PORT_SHIFT 2 +#define OMAP7XX_PORT_SHIFT 0 + +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP1UART1 11 +#define OMAP1UART2 12 +#define OMAP1UART3 13 + +#ifndef __ASSEMBLER__ +extern void omap_serial_init(void); +#endif + +#endif diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h new file mode 100644 index 0000000..6cf9c1c --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -0,0 +1,229 @@ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +/* These are needed to compile common code */ +#ifdef CONFIG_ARCH_OMAP1 +#define cpu_is_omap242x() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap44xx() 0 +#define soc_is_omap54xx() 0 +#define soc_is_am33xx() 0 +#define cpu_class_is_omap1() 1 +#define cpu_class_is_omap2() 0 +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/mach-omap1/include/mach/tc.h index 1b4b2da..1b4b2da 100644 --- a/arch/arm/plat-omap/include/plat/tc.h +++ b/arch/arm/mach-omap1/include/mach/tc.h diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index 0ff22dc..ad6fbe7 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -1,5 +1,122 @@ /* - * arch/arm/mach-omap1/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include <plat/uncompress.h> +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/memory.h> +#include <asm/mach-types.h> + +#include "serial.h" + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP7XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) + +#define DEBUG_LL_OMAP1(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap7xx/8xx based boards using UART1 with shift 0 */ + DEBUG_LL_OMAP7XX(1, herald); + DEBUG_LL_OMAP7XX(1, omap_perseus2); + + /* omap15xx/16xx based boards using UART1 */ + DEBUG_LL_OMAP1(1, ams_delta); + DEBUG_LL_OMAP1(1, nokia770); + DEBUG_LL_OMAP1(1, omap_h2); + DEBUG_LL_OMAP1(1, omap_h3); + DEBUG_LL_OMAP1(1, omap_innovator); + DEBUG_LL_OMAP1(1, omap_osk); + DEBUG_LL_OMAP1(1, omap_palmte); + DEBUG_LL_OMAP1(1, omap_palmz71); + + /* omap15xx/16xx based boards using UART2 */ + DEBUG_LL_OMAP1(2, omap_palmtt); + + /* omap15xx/16xx based boards using UART3 */ + DEBUG_LL_OMAP1(3, sx1); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 6a5baab..5a3b806 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -17,8 +17,8 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/tc.h> -#include <plat/dma.h> +#include <mach/tc.h> +#include <plat-omap/dma-omap.h> #include "iomap.h" #include "common.h" @@ -134,7 +134,6 @@ void __init omap1_init_early(void) */ omap1_clk_init(); omap1_mux_init(); - omap_init_consistent_dma_size(); } void __init omap1_init_late(void) diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h index 330c471..f4e2d7a 100644 --- a/arch/arm/mach-omap1/iomap.h +++ b/arch/arm/mach-omap1/iomap.h @@ -22,9 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 6995fb6..122ef67 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -45,7 +45,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <plat/cpu.h> +#include "soc.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index ed42628..7ed8c18 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,11 +27,13 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/hardware.h> #include <mach/lcdc.h> +#include "dma.h" + int omap_lcd_dma_running(void) { /* diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index bdc2e75..c6d8fdf 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,14 +19,15 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/mux.h> -#include <plat/cpu.h> +#include "soc.h" #include <linux/platform_data/asoc-ti-mcbsp.h> #include <mach/irqs.h> #include "iomap.h" +#include "dma.h" #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h new file mode 100644 index 0000000..39c2b13 --- /dev/null +++ b/arch/arm/mach-omap1/mmc.h @@ -0,0 +1,18 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP15XX_NR_MMC 1 +#define OMAP16XX_NR_MMC 2 +#define OMAP1_MMC_SIZE 0x080 +#define OMAP1_MMC1_BASE 0xfffb7800 +#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +#else +static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c index 9cd4ddb..8dcebe6 100644 --- a/arch/arm/mach-omap1/opp_data.c +++ b/arch/arm/mach-omap1/opp_data.c @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include <plat/clkdev_omap.h> +#include "clock.h" #include "opp.h" /*------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 47ec161..66d663a 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -44,23 +44,23 @@ #include <linux/io.h> #include <linux/atomic.h> +#include <asm/fncpy.h> #include <asm/system_misc.h> #include <asm/irq.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> #include <mach/irqs.h> #include "iomap.h" +#include "clock.h" #include "pm.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 7868e75..3f2d396 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -19,8 +19,7 @@ #include <linux/clk.h> #include <linux/err.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "soc.h" #ifdef CONFIG_PM_RUNTIME static int omap1_pm_runtime_suspend(struct device *dev) diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index b177091..5eebd7e 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -4,12 +4,24 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/prcm.h> - #include <mach/hardware.h> +#include "iomap.h" #include "common.h" +/* ARM_SYSST bit shifts related to SoC reset sources */ +#define ARM_SYSST_POR_SHIFT 5 +#define ARM_SYSST_EXT_RST_SHIFT 4 +#define ARM_SYSST_ARM_WDRST_SHIFT 2 +#define ARM_SYSST_GLOB_SWRST_SHIFT 1 + +/* Standardized reset source bits (across all OMAP SoCs) */ +#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0 +#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1 +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 +#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5 + + void omap1_restart(char mode, const char *cmd) { /* @@ -23,3 +35,28 @@ void omap1_restart(char mode, const char *cmd) omap_writew(1, ARM_RSTCT1); } + +/** + * omap1_get_reset_sources - return the source of the SoC's last reset + * + * Returns bits that represent the last reset source for the SoC. The + * format is standardized across OMAPs for use by the OMAP watchdog. + */ +u32 omap1_get_reset_sources(void) +{ + u32 ret = 0; + u16 rs; + + rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST)); + + if (rs & (1 << ARM_SYSST_POR_SHIFT)) + ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT)) + ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT)) + ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT)) + ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT; + + return ret; +} diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b9d6834..d1ac080 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -23,7 +23,6 @@ #include <asm/mach-types.h> #include <mach/mux.h> -#include <plat/fpga.h> #include "pm.h" diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 0e62874..a908c51 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -36,6 +36,8 @@ #include <asm/assembler.h> +#include <mach/hardware.h> + #include "iomap.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h new file mode 100644 index 0000000..69daf01 --- /dev/null +++ b/arch/arm/mach-omap1/soc.h @@ -0,0 +1,4 @@ +/* + * We can move mach/soc.h here once the drivers are fixed + */ +#include <mach/soc.h> diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c new file mode 100644 index 0000000..6431b0f --- /dev/null +++ b/arch/arm/mach-omap1/sram-init.c @@ -0,0 +1,76 @@ +/* + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "sram.h" + +#define OMAP1_SRAM_PA 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_and_map_sram(void) +{ + unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ; + unsigned long omap_sram_start = OMAP1_SRAM_PA; + unsigned long omap_sram_size; + + if (cpu_is_omap7xx()) + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; /* 16K */ + else { + pr_err("Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, 1); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; + _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap_sram_init(void) +{ + omap_detect_and_map_sram(); + _omap_sram_reprogram_clock = + omap_sram_push(omap1_sram_reprogram_clock, + omap1_sram_reprogram_clock_sz); + + return 0; +} diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h new file mode 100644 index 0000000..d5a6c83 --- /dev/null +++ b/arch/arm/mach-omap1/sram.h @@ -0,0 +1,7 @@ +#include <plat/sram.h> + +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index cdeb9d3..bde7a35 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 7452954..41152fa 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -50,7 +50,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <plat/dmtimer.h> +#include <plat/counter-32k.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 84267ed..104fed3 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata) #endif -u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) return syscon1 << 16; } -u32 __init omap1_usb1_init(unsigned nwires) +static u32 __init omap1_usb1_init(unsigned nwires) { u32 syscon1 = 0; @@ -475,7 +475,7 @@ bad: return syscon1 << 20; } -u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) { u32 syscon1 = 0; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fe40d9e..11c57af 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,30 +4,37 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o - -# INTCPS IP block support - XXX should be moved to drivers/ -obj-$(CONFIG_ARCH_OMAP2) += irq.o -obj-$(CONFIG_ARCH_OMAP3) += irq.o -obj-$(CONFIG_SOC_AM33XX) += irq.o - -# Secure monitor API support -obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o -obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ + omap_device.o sram.o + +omap-2-3-common = irq.o +hwmod-common = omap_hwmod.o \ + omap_hwmod_common_data.o +clock-common = clock.o clock_common_data.o \ + clkt_dpll.o clkt_clksel.o +secure-common = omap-smc.o omap-secure.o + +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) +obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o endif -obj-$(CONFIG_TWL4030_CORE) += omap_twl.o +obj-$(CONFIG_TWL4030_CORE) += omap_twl.o +obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o -obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o -obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o +omap-4-5-common = omap4-common.o omap-wakeupgen.o \ + sleep44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -43,6 +50,11 @@ AFLAGS_sram242x.o :=-Wa,-march=armv6 AFLAGS_sram243x.o :=-Wa,-march=armv6 AFLAGS_sram34xx.o :=-Wa,-march=armv7-a +# Restart code (OMAP4/5 currently in omap4-common.c) +obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o +obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o +obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o + # Pin multiplexing obj-$(CONFIG_SOC_OMAP2420) += mux2420.o obj-$(CONFIG_SOC_OMAP2430) += mux2430.o @@ -52,7 +64,6 @@ obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o -obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # OPP table initialization ifeq ($(CONFIG_PM_OPP),y) @@ -62,16 +73,18 @@ obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o endif # Power Management +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o + ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o +obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o +obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o -obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o +obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o -obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o +obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) @@ -83,76 +96,82 @@ endif endif ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o endif # PRCM -obj-y += prcm.o prm_common.o -obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o +obj-y += prm_common.o cm_common.o +obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o +obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ - vc44xx_data.o vp44xx_data.o \ - prm44xx.o + vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) # OMAP voltage domains -obj-y += voltage.o vc.o vp.o +voltagedomain-common := voltage.o vc.o vp.o +obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o +obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o +obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common) +obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common) # OMAP powerdomain framework -obj-y += powerdomain.o powerdomain-common.o +powerdomain-common += powerdomain.o powerdomain-common.o +obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o -obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o -obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) # PRCM clockdomain control -obj-y += clockdomain.o -obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o +clockdomain-common += clockdomain.o +obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) # Clock framework -obj-y += clock.o clock_common_data.o \ - clkt_dpll.o clkt_clksel.o -obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o +obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o -obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o +obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o +obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o +obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o -obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) @@ -160,7 +179,6 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o # hwmod data -obj-y += omap_hwmod_common_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o @@ -184,8 +202,6 @@ obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o -obj-$(CONFIG_OMAP_IOMMU) += iommu2.o - iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) @@ -206,10 +222,10 @@ obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o -obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o +obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o -obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o -obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o diff --git a/arch/arm/mach-omap2/am33xx.h b/arch/arm/mach-omap2/am33xx.h index 06c19bb..43296c1 100644 --- a/arch/arm/mach-omap2/am33xx.h +++ b/arch/arm/mach-omap2/am33xx.h @@ -21,5 +21,6 @@ #define AM33XX_SCM_BASE 0x44E10000 #define AM33XX_CTRL_BASE AM33XX_SCM_BASE #define AM33XX_PRCM_BASE 0x44E00000 +#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + 0x3FC) #endif /* __ASM_ARCH_AM33XX_H */ diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index d0c54c5..af11dcd 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/davinci_emac.h> #include <asm/system.h> -#include <plat/omap_device.h> +#include "omap_device.h" #include "am35xx.h" #include "control.h" #include "am35xx-emac.h" diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 95b384d..4815ea6 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -28,14 +28,12 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> -#include <plat/usb.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include <video/omapdss.h> @@ -287,5 +285,5 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .init_machine = omap_2430sdp_init, .init_late = omap2430_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 96cd369..6601754 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -30,15 +30,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> +#include <plat-omap/dma-omap.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> +#include "gpmc.h" #include "gpmc-smc91x.h" +#include "soc.h" #include "board-flash.h" #include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" @@ -597,5 +597,5 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .init_machine = omap_3430sdp_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index fc224ad..050aaa7 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -18,9 +18,8 @@ #include "common.h" #include "gpmc-smc91x.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h" @@ -213,5 +212,5 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .init_machine = omap_sdp_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 3669c12..85dfa71 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -27,6 +27,7 @@ #include <linux/leds.h> #include <linux/leds_pwm.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/usb/musb.h> #include <asm/hardware/gic.h> #include <asm/mach-types.h> @@ -34,8 +35,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> -#include <plat/mmc.h> #include "omap4-keypad.h" #include <video/omapdss.h> #include <video/omap-panel-nokia-dsi.h> @@ -45,6 +44,7 @@ #include "soc.h" #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" @@ -881,5 +881,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .init_machine = omap_4430sdp_init, .init_late = omap4430_init_late, .timer = &omap4_timer, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 318fead..51b96a1 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include "am35xx-emac.h" #include "mux.h" @@ -94,5 +93,5 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .init_machine = am3517_crane_init, .init_late = am35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index e162897..4be58fd 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -25,6 +25,7 @@ #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> #include <linux/mmc/host.h> +#include <linux/usb/musb.h> #include <linux/platform_data/gpio-omap.h> #include "am35xx.h" @@ -33,7 +34,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> @@ -393,5 +393,5 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .init_machine = am3517_evm_init, .init_late = am35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index cea3aba..5d0a61f 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -28,14 +28,14 @@ #include <linux/clk.h> #include <linux/smc91x.h> #include <linux/gpio.h> +#include <linux/platform_data/leds-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <plat/led.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -338,5 +338,5 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .init_machine = omap_apollon_init, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 376d26e..c8e37dc 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -38,21 +38,19 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> - +#include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-nand.h" #define CM_T35_GPIO_PENDOWN 57 #define SB_T35_USB_HUB_RESET_GPIO 167 @@ -181,7 +179,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = { static void __init cm_t35_init_nand(void) { - if (gpmc_nand_init(&cm_t35_nand_data) < 0) + if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) pr_err("CM-T35: Unable to register NAND device\n"); } #else @@ -753,18 +751,18 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_machine = cm_t35_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(CM_T3730, "Compulab CM-T3730") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap3_init_irq, .handle_irq = omap3_intc_handle_irq, - .init_machine = cm_t3730_init, + .init_machine = cm_t3730_init, .init_late = omap3630_init_late, - .timer = &omap3_timer, - .restart = omap_prcm_restart, + .timer = &omap3_timer, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 59c0a45..ebbc2ad 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -39,9 +39,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "am35xx.h" @@ -49,6 +48,7 @@ #include "control.h" #include "common-board-devices.h" #include "am35xx-emac.h" +#include "gpmc-nand.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -240,7 +240,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = { static void __init cm_t3517_init_nand(void) { - if (gpmc_nand_init(&cm_t3517_nand_data) < 0) + if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0) pr_err("CM-T3517: NAND initialization failed\n"); } #else @@ -297,6 +297,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .timer = &omap3_timer, - .restart = omap_prcm_restart, + .timer = &omap3_gp_timer, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1fd161e..7667eb7 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -39,9 +39,8 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> @@ -55,8 +54,11 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 @@ -621,8 +623,9 @@ static void __init devkit8000_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions)); + board_nand_init(devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure SDRC pins are mux'd for self-refresh */ @@ -640,5 +643,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .init_machine = devkit8000_init, .init_late = omap35xx_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e642acf..c33adea 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -17,14 +17,14 @@ #include <linux/mtd/physmap.h> #include <linux/io.h> -#include <plat/cpu.h> -#include <plat/gpmc.h> #include <linux/platform_data/mtd-nand-omap2.h> #include <linux/platform_data/mtd-onenand-omap2.h> -#include <plat/tc.h> +#include "soc.h" #include "common.h" #include "board-flash.h" +#include "gpmc-onenand.h" +#include "gpmc-nand.h" #define REG_FPGA_REV 0x10 #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 @@ -104,36 +104,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, defined(CONFIG_MTD_NAND_OMAP2_MODULE) /* Note that all values in this struct are in nanoseconds */ -static struct gpmc_timings nand_timings = { +struct gpmc_timings nand_default_timings[1] = { + { + .sync_clk = 0, - .sync_clk = 0, + .cs_on = 0, + .cs_rd_off = 36, + .cs_wr_off = 36, - .cs_on = 0, - .cs_rd_off = 36, - .cs_wr_off = 36, + .adv_on = 6, + .adv_rd_off = 24, + .adv_wr_off = 36, - .adv_on = 6, - .adv_rd_off = 24, - .adv_wr_off = 36, + .we_off = 30, + .oe_off = 48, - .we_off = 30, - .oe_off = 48, + .access = 54, + .rd_cycle = 72, + .wr_cycle = 72, - .access = 54, - .rd_cycle = 72, - .wr_cycle = 72, - - .wr_access = 30, - .wr_data_mux_bus = 0, + .wr_access = 30, + .wr_data_mux_bus = 0, + }, }; -static struct omap_nand_platform_data board_nand_data = { - .gpmc_t = &nand_timings, -}; +static struct omap_nand_platform_data board_nand_data; void -__init board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) +__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, + int nand_type, struct gpmc_timings *gpmc_t) { board_nand_data.cs = cs; board_nand_data.parts = nand_parts; @@ -141,7 +140,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.devsize = nand_type; board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; - gpmc_nand_init(&board_nand_data); + gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ @@ -238,5 +237,6 @@ void __init board_flash_init(struct flash_partitions partition_info[], pr_err("NAND: Unable to find configuration in GPMC\n"); else board_nand_init(partition_info[2].parts, - partition_info[2].nr_parts, nandcs, nand_type); + partition_info[2].nr_parts, nandcs, + nand_type, nand_default_timings); } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index c44b70d..2fb5d41 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -12,7 +12,7 @@ */ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <plat/gpmc.h> +#include "gpmc.h" #define PDC_NOR 1 #define PDC_NAND 2 @@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[], #if defined(CONFIG_MTD_NAND_OMAP2) || \ defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type); + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t); +extern struct gpmc_timings nand_default_timings[]; #else static inline void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t) { } +#define nand_default_timings NULL #endif #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 601ecdf..f0715a3 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -57,7 +57,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END #endif @@ -76,7 +76,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap243x_boards_compat, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END #endif @@ -95,7 +95,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, +MACHINE_END + +static const char *omap3_gp_boards_compat[] __initdata = { + "ti,omap3-beagle", + NULL, +}; + +DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_secure_timer, + .dt_compat = omap3_gp_boards_compat, + .restart = omap3xxx_restart, MACHINE_END #endif @@ -134,7 +151,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_late = omap4430_init_late, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END #endif @@ -154,6 +171,6 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap5_timer, .dt_compat = omap5_boards_compat, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 8d04bf8..b626dbe 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -26,15 +26,14 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/input/matrix_keypad.h> +#include <linux/mfd/menelaus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/menelaus.h> -#include <plat/dma.h> -#include <plat/gpmc.h> -#include "debug-devices.h" +#include <plat-omap/dma-omap.h> +#include <plat/debug-devices.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -42,6 +41,7 @@ #include "common.h" #include "mux.h" #include "control.h" +#include "gpmc.h" #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 @@ -386,5 +386,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .init_machine = omap_h4_init, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 48d5e41..0f24cb8 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -29,20 +29,19 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include "common.h" -#include <plat/gpmc.h> -#include <plat/usb.h> - #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include "common.h" +#include "gpmc.h" #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" #include "common-board-devices.h" #include "board-flash.h" #include "control.h" +#include "gpmc-onenand.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -175,7 +174,7 @@ static void __init igep_flash_init(void) pr_info("IGEP: initializing NAND memory device\n"); board_nand_init(igep_flash_partitions, ARRAY_SIZE(igep_flash_partitions), - 0, NAND_BUSWIDTH_16); + 0, NAND_BUSWIDTH_16, nand_default_timings); } else if (mux == IGEP_SYSBOOT_ONENAND) { pr_info("IGEP: initializing OneNAND memory device\n"); board_onenand_init(igep_flash_partitions, @@ -580,6 +579,11 @@ static void __init igep_wlan_bt_init(void) } else return; + /* Make sure that the GPIO pins are muxed correctly */ + omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT); + err = gpio_request_array(igep_wlan_bt_gpios, ARRAY_SIZE(igep_wlan_bt_gpios)); if (err) { @@ -652,7 +656,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .init_machine = igep_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -665,5 +669,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .init_machine = igep_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ee8c3cf..0869f4f 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -35,9 +35,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> -#include <mach/board-zoom.h> -#include <plat/usb.h> +#include "board-zoom.h" +#include "gpmc.h" #include "gpmc-smsc911x.h" #include <video/omapdss.h> @@ -420,8 +419,8 @@ static void __init omap_ldp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); usb_musb_init(NULL); - board_nand_init(ldp_nand_partitions, - ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); + board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), + ZOOM_NAND_CS, 0, nand_default_timings); omap_hsmmc_init(mmc); ldp_display_init(); @@ -437,5 +436,5 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .init_machine = omap_ldp_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index d95f727..a4e167c 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -22,16 +22,17 @@ #include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/mfd/menelaus.h> #include <sound/tlv320aic3x.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include "common.h" -#include <plat/menelaus.h> -#include <plat/mmc.h> +#include "mmc.h" #include "mux.h" +#include "gpmc-onenand.h" #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 @@ -689,7 +690,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") @@ -702,7 +703,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") @@ -715,5 +716,5 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index d41ab98..22c483d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -39,19 +39,22 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> -#include <plat/omap_device.h> +#include "common.h" +#include "omap_device.h" +#include "gpmc.h" +#include "soc.h" #include "mux.h" #include "hsmmc.h" #include "pm.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -518,8 +521,9 @@ static void __init omap3_beagle_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, - ARRAY_SIZE(omap3beagle_nand_partitions)); + board_nand_init(omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure msecure is mux'd to be able to set the RTC. */ @@ -541,5 +545,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .init_machine = omap3_beagle_init, .init_late = omap3_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b9b776b..54647d6 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -32,6 +32,7 @@ #include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> #include <linux/usb/otg.h> +#include <linux/usb/musb.h> #include <linux/usb/nop-usb-xceiv.h> #include <linux/smsc911x.h> @@ -45,17 +46,20 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> +#include "soc.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "board-flash.h" + +#define NAND_CS 0 #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -731,8 +735,9 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, - ARRAY_SIZE(omap3evm_nand_partitions)); + board_nand_init(omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); @@ -752,5 +757,5 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .init_machine = omap3_evm_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 7bd8253..2a065ba 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -34,16 +34,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "gpmc-smsc911x.h" -#include <plat/gpmc.h> -#include <plat/sdrc.h> -#include <plat/usb.h> - #include "common.h" #include "mux.h" #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-smsc911x.h" #define OMAP3LOGIC_SMSC911X_CS 1 @@ -235,7 +232,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") @@ -248,5 +245,5 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 00a1f4a..a53a668 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -42,7 +42,6 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> #include <video/omapdss.h> #include <linux/platform_data/mtd-nand-omap2.h> @@ -50,6 +49,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc-nand.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -602,7 +602,7 @@ static void __init omap3pandora_init(void) omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); usb_musb_init(NULL); - gpmc_nand_init(&pandora_nand_data); + gpmc_nand_init(&pandora_nand_data, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); @@ -619,5 +619,5 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .init_machine = omap3pandora_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 731235e..d8638b3 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -40,9 +40,8 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> @@ -428,5 +427,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .init_machine = omap3_stalker_init, .init_late = omap35xx_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 944ffc4..263cb9c 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -44,12 +44,12 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/usb.h> #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" #include <asm/setup.h> @@ -59,6 +59,8 @@ #define TB_BL_PWM_TIMER 9 #define TB_KILL_POWER_GPIO 168 +#define NAND_CS 0 + static unsigned long touchbook_revision; static struct mtd_partition omap3touchbook_nand_partitions[] = { @@ -365,8 +367,9 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, - ARRAY_SIZE(omap3touchbook_nand_partitions)); + board_nand_init(omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); @@ -384,5 +387,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .init_machine = omap3_touchbook_init, .init_late = omap3430_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index bfcd397..12a3a24 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -29,6 +29,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/ti_wilink_st.h> +#include <linux/usb/musb.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -38,12 +39,11 @@ #include <asm/mach/map.h> #include <video/omapdss.h> -#include "common.h" -#include <plat/usb.h> -#include <plat/mmc.h> #include <video/omap-panel-tfp410.h> +#include "common.h" #include "soc.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" @@ -524,5 +524,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .init_machine = omap4_panda_init, .init_late = omap4430_init_late, .timer = &omap4_timer, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b700685..c8fde3e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -45,18 +45,20 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> -#include <plat/usb.h> +#include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" +#include "gpmc.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 #define OVERO_GPIO_PENDOWN 114 @@ -495,8 +497,8 @@ static void __init overo_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_nand_flash_init(0, overo_nand_partitions, - ARRAY_SIZE(overo_nand_partitions)); + board_nand_init(overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); @@ -550,5 +552,5 @@ MACHINE_START(OVERO, "Gumstix Overo") .init_machine = overo_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 45997bf..cbcb1b2 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -22,17 +22,14 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <plat/i2c.h> -#include <plat/mmc.h> -#include <plat/usb.h> -#include <plat/gpmc.h> #include "common.h" -#include <plat/serial.h> - #include "mux.h" +#include "gpmc.h" +#include "mmc.h" #include "hsmmc.h" #include "sdram-nokia.h" #include "common-board-devices.h" +#include "gpmc-onenand.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), @@ -151,7 +148,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .init_machine = rm680_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") @@ -164,5 +161,5 @@ MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") .init_machine = rm680_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 020e03c..07005fe 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -31,9 +31,7 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> -#include <plat/omap-pm.h> +#include <plat-omap/dma-omap.h> #include "gpmc-smc91x.h" #include "board-rx51.h" @@ -52,8 +50,11 @@ #endif #include "mux.h" +#include "omap-pm.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-onenand.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 7bbb05d..bf8f74b 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -17,18 +17,18 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> -#include <plat/usb.h> +#include <plat-omap/dma-omap.h> +#include "common.h" #include "mux.h" +#include "gpmc.h" #include "pm.h" #include "sdram-nokia.h" @@ -127,5 +127,5 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .init_machine = rx51_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index c4f8833..1a3e056 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -14,13 +14,14 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/usb/musb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> static struct omap_musb_board_data musb_board_data = { .set_phy_power = ti81xx_musb_phy_power, @@ -45,7 +46,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") .timer = &omap3_timer, .init_machine = ti81xx_evm_init, .init_late = ti81xx_init_late, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END MACHINE_START(TI8148EVM, "ti8148evm") @@ -57,5 +58,5 @@ MACHINE_START(TI8148EVM, "ti8148evm") .timer = &omap3_timer, .init_machine = ti81xx_evm_init, .init_late = ti81xx_init_late, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index afb2278..42e5f23 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -17,10 +17,10 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "soc.h" #include "common.h" diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index b940ab2..1c7c834 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -16,8 +16,9 @@ #include <linux/spi/spi.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" +#include "soc.h" #include "common.h" #define LCD_PANEL_RESET_GPIO_PROD 96 diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index c166fe1..26e07ad 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -26,9 +26,8 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "mux.h" #include "hsmmc.h" diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4994438..d7fa31e 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -22,9 +22,8 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/usb.h> -#include <mach/board-zoom.h> +#include "board-zoom.h" #include "board-flash.h" #include "mux.h" @@ -113,8 +112,9 @@ static void __init omap_zoom_init(void) usbhs_init(&usbhs_bdata); } - board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), - ZOOM_NAND_CS, NAND_BUSWIDTH_16); + board_nand_init(zoom_nand_partitions, + ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS, + NAND_BUSWIDTH_16, nand_default_timings); zoom_debugboard_init(); zoom_peripherals_init(); @@ -138,7 +138,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .init_machine = omap_zoom_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") @@ -151,5 +151,5 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .init_machine = omap_zoom_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h index 2e94869..2e94869 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/board-zoom.h diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index c2d1521..8c5b13e 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -21,12 +21,10 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/prcm.h> #include "clock.h" #include "clock2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ @@ -38,44 +36,16 @@ #define APLLS_CLKIN_13MHZ 2 #define APLLS_CLKIN_12MHZ 3 -void __iomem *cm_idlest_pll; - /* Private functions */ -/* Enable an APLL if off */ -static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) -{ - u32 cval, apll_mask; - - apll_mask = EN_APLL_LOCKED << clk->enable_bit; - - cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - - if ((cval & apll_mask) == apll_mask) - return 0; /* apll already enabled */ - - cval &= ~apll_mask; - cval |= apll_mask; - omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); - - omap2_cm_wait_idlest(cm_idlest_pll, status_mask, - OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk)); - - /* - * REVISIT: Should we return an error code if omap2_wait_clock_ready() - * fails? - */ - return 0; -} - -static int omap2_clk_apll96_enable(struct clk *clk) +static int _apll96_enable(struct clk *clk) { - return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK); + return omap2xxx_cm_apll96_enable(); } -static int omap2_clk_apll54_enable(struct clk *clk) +static int _apll54_enable(struct clk *clk) { - return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK); + return omap2xxx_cm_apll54_enable(); } static void _apll96_allow_idle(struct clk *clk) @@ -98,28 +68,28 @@ static void _apll54_deny_idle(struct clk *clk) omap2xxx_cm_set_apll54_disable_autoidle(); } -/* Stop APLL */ -static void omap2_clk_apll_disable(struct clk *clk) +static void _apll96_disable(struct clk *clk) { - u32 cval; + omap2xxx_cm_apll96_disable(); +} - cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - cval &= ~(EN_APLL_LOCKED << clk->enable_bit); - omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); +static void _apll54_disable(struct clk *clk) +{ + omap2xxx_cm_apll54_disable(); } /* Public data */ const struct clkops clkops_apll96 = { - .enable = omap2_clk_apll96_enable, - .disable = omap2_clk_apll_disable, + .enable = _apll96_enable, + .disable = _apll96_disable, .allow_idle = _apll96_allow_idle, .deny_idle = _apll96_deny_idle, }; const struct clkops clkops_apll54 = { - .enable = omap2_clk_apll54_enable, - .disable = omap2_clk_apll_disable, + .enable = _apll54_enable, + .disable = _apll54_disable, .allow_idle = _apll54_allow_idle, .deny_idle = _apll54_deny_idle, }; diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c index 1502a7b..399534c 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpll.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpll.c @@ -14,10 +14,8 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" /* Private functions */ diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 4ae4392..825e44c 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -25,21 +25,25 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "sram.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ +/* + * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx + * (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set + * during dpll_ck init and used later by omap2xxx_clk_get_core_rate(). + */ +static struct clk *dpll_core_ck; + /** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate - * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") * * Returns the CORE_CLK rate. CORE_CLK can have one of three rate * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz @@ -47,12 +51,14 @@ * struct clk *dpll_ck, which is a composite clock of dpll_ck and * core_ck. */ -unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) +unsigned long omap2xxx_clk_get_core_rate(void) { long long core_clk; u32 v; - core_clk = omap2_get_dpll_rate(clk); + WARN_ON(!dpll_core_ck); + + core_clk = omap2_get_dpll_rate(dpll_core_ck); v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); v &= OMAP24XX_CORE_CLK_SRC_MASK; @@ -100,7 +106,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate) unsigned long omap2_dpllcore_recalc(struct clk *clk) { - return omap2xxx_clk_get_core_rate(clk); + return omap2xxx_clk_get_core_rate(); } int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) @@ -110,7 +116,7 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) struct prcm_config tmpset; const struct dpll_data *dd; - cur_rate = omap2xxx_clk_get_core_rate(dclk); + cur_rate = omap2xxx_clk_get_core_rate(); mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); mult &= OMAP24XX_CORE_CLK_SRC_MASK; @@ -171,3 +177,19 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) return 0; } +/** + * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck + * @clk: struct clk *dpll_ck + * + * Store a local copy of @clk in dpll_core_ck so other code can query + * the core rate without having to clk_get(), which can sleep. Must + * only be called once. No return value. XXX If the clock + * registration process is ever changed such that dpll_ck is no longer + * statically defined, this code may need to change to increment some + * kind of use count on dpll_ck. + */ +void omap2xxx_clkt_dpllcore_init(struct clk *clk) +{ + WARN(dpll_core_ck, "dpll_core_ck already set - should never happen"); + dpll_core_ck = clk; +} diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c index c346092..e177737 100644 --- a/arch/arm/mach-omap2/clkt2xxx_osc.c +++ b/arch/arm/mach-omap2/clkt2xxx_osc.c @@ -23,8 +23,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock2xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c index 8693cfd..46683b3 100644 --- a/arch/arm/mach-omap2/clkt2xxx_sys.c +++ b/arch/arm/mach-omap2/clkt2xxx_sys.c @@ -22,8 +22,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock2xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3524f0e7..1c2041f 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -1,7 +1,7 @@ /* * OMAP2xxx DVFS virtual clock functions * - * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2010 Nokia Corporation * * Contacts: @@ -33,20 +33,25 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "sram.h" const struct prcm_config *curr_prcm_set; const struct prcm_config *rate_table; +/* + * sys_ck_rate: the rate of the external high-frequency clock + * oscillator on the board. Set by the SoC-specific clock init code. + * Once set during a boot, will not change. + */ +static unsigned long sys_ck_rate; + /** * omap2_table_mpu_recalc - just return the MPU speed * @clk: virt_prcm_set struct clk @@ -68,15 +73,14 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk) long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) { const struct prcm_config *ptr; - long highest_rate, sys_clk_rate; + long highest_rate; highest_rate = -EINVAL; - sys_clk_rate = __clk_get_rate(sclk); for (ptr = rate_table; ptr->mpu_speed; ptr++) { if (!(ptr->flags & cpu_mask)) continue; - if (ptr->xtal_speed != sys_clk_rate) + if (ptr->xtal_speed != sys_ck_rate) continue; highest_rate = ptr->mpu_speed; @@ -95,15 +99,12 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; - long sys_clk_rate; - - sys_clk_rate = __clk_get_rate(sclk); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_clk_rate) + if (prcm->xtal_speed != sys_ck_rate) continue; if (prcm->mpu_speed <= rate) { @@ -119,7 +120,7 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) } curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(dclk); + cur_rate = omap2xxx_clk_get_core_rate(); if (prcm->dpll_speed == cur_rate / 2) { omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); @@ -169,3 +170,50 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } + +/** + * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate + * table sets matches the current CORE DPLL hardware rate + * + * Check the MPU rate set by bootloader. Sets the 'curr_prcm_set' + * global to point to the active rate set when found; otherwise, sets + * it to NULL. No return value; + */ +void omap2xxx_clkt_vps_check_bootloader_rates(void) +{ + const struct prcm_config *prcm = NULL; + unsigned long rate; + + rate = omap2xxx_clk_get_core_rate(); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck_rate) + continue; + if (prcm->dpll_speed <= rate) + break; + } + curr_prcm_set = prcm; +} + +/** + * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate + * + * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS + * code. (The sys_ck rate does not -- or rather, must not -- change + * during kernel runtime.) Must be called after we have a valid + * sys_ck rate, but before the virt_prcm_set clock rate is + * recalculated. No return value. + */ +void omap2xxx_clkt_vps_late_init(void) +{ + struct clk *c; + + c = clk_get(NULL, "sys_ck"); + if (IS_ERR(c)) { + WARN(1, "could not locate sys_ck\n"); + } else { + sys_ck_rate = clk_get_rate(c); + clk_put(c); + } +} diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index 7c6da2f..6cf298e 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -21,14 +21,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "clock.h" #include "clock3xxx.h" #include "clock34xx.h" #include "sdrc.h" +#include "sram.h" #define CYCLES_PER_MHZ 1000000 diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index 3ff2211..53646fa 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -45,8 +45,6 @@ #include <linux/io.h> #include <linux/bug.h> -#include <plat/clock.h> - #include "clock.h" /* Private functions */ diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 8041114..8463cc3 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -21,8 +21,6 @@ #include <asm/div64.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "cm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c index 3d43fba..fe774a0 100644 --- a/arch/arm/mach-omap2/clkt_iclk.c +++ b/arch/arm/mach-omap2/clkt_iclk.c @@ -14,8 +14,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/prcm.h> #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 961ac8f..e381d991 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -15,6 +15,7 @@ #undef DEBUG #include <linux/kernel.h> +#include <linux/export.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -25,17 +26,24 @@ #include <asm/cpu.h> -#include <plat/clock.h> -#include <plat/prcm.h> #include <trace/events/power.h> #include "soc.h" #include "clockdomain.h" #include "clock.h" -#include "cm2xxx_3xxx.h" +#include "cm.h" +#include "cm2xxx.h" +#include "cm3xxx.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" +#include "common.h" + +/* + * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait + * for a module to indicate that it is no longer in idle + */ +#define MAX_MODULE_ENABLE_WAIT 100000 u16 cpu_mask; @@ -47,12 +55,50 @@ u16 cpu_mask; */ static bool clkdm_control = true; +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + /* * OMAP2+ specific clock functions */ /* Private functions */ + +/** + * _wait_idlest_generic - wait for a module to leave the idle state + * @reg: virtual address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @idlest: idle state indicator (0 or 1) for the clock + * @name: name of the clock (for printk) + * + * Wait for a module to leave idle, where its idle-status register is + * not inside the CM module. Returns 1 if the module left idle + * promptly, or 0 if the module did not leave idle before the timeout + * elapsed. XXX Deprecated - should be moved into drivers for the + * individual IP block that the IDLEST register exists in. + */ +static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest, + const char *name) +{ + int i = 0, ena = 0; + + ena = (idlest) ? 0 : mask; + + omap_test_timeout(((__raw_readl(reg) & mask) == ena), + MAX_MODULE_ENABLE_WAIT, i); + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("omap clock: module associated with clock %s ready after %d loops\n", + name, i); + else + pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", + name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +}; + /** * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE * @clk: struct clk * belonging to the module @@ -66,7 +112,9 @@ static bool clkdm_control = true; static void _omap2_module_wait_ready(struct clk *clk) { void __iomem *companion_reg, *idlest_reg; - u8 other_bit, idlest_bit, idlest_val; + u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; + s16 prcm_mod; + int r; /* Not all modules have multiple clocks that their IDLEST depends on */ if (clk->ops->find_companion) { @@ -77,8 +125,14 @@ static void _omap2_module_wait_ready(struct clk *clk) clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); - omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val, - __clk_get_name(clk)); + r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id); + if (r) { + /* IDLEST register not in the CM module */ + _wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val, + clk->name); + } else { + cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit); + }; } /* Public functions */ @@ -512,12 +566,510 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, /* Common data */ -struct clk_functions omap2_clk_functions = { - .clk_enable = omap2_clk_enable, - .clk_disable = omap2_clk_disable, - .clk_round_rate = omap2_clk_round_rate, - .clk_set_rate = omap2_clk_set_rate, - .clk_set_parent = omap2_clk_set_parent, - .clk_disable_unused = omap2_clk_disable_unused, +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + pr_err("Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + + omap2_clk_disable(clk); + +out: + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * Optional clock functions defined in include/linux/clk.h + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap2_clk_set_rate(clk, rate); + if (ret == 0) + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + ret = omap2_clk_set_parent(clk, parent); + if (ret == 0) + propagate_rate(clk); + } else { + ret = -EBUSY; + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * OMAP specific clock functions shared between omap1 and omap2 + */ + +int __initdata mpurate; + +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) +{ + get_option(&str, &mpurate); + + if (!mpurate) + return 1; + + if (mpurate < 1000) + mpurate *= 1000000; + + return 1; +} +__setup("mpurate=", omap_clk_setup); + +/* Used for clocks that always have same value as the parent clock */ +unsigned long followparent_recalc(struct clk *clk) +{ + return clk->parent->rate; +} + +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +unsigned long omap_fixed_divisor_recalc(struct clk *clk) +{ + WARN_ON(!clk->fixed_div); + + return clk->parent->rate / clk->fixed_div; +} + +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + +/* Propagate rate to children */ +void propagate_rate(struct clk *tclk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +static LIST_HEAD(root_clks); + +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + + list_add(&clk->node, &clocks); + if (clk->init) + clk->init(clk); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->sibling); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); +} + +/** + * omap_clk_get_by_name - locate OMAP struct clk by its name + * @name: name of the struct clk to locate + * + * Locate an OMAP struct clk by its name. Assumes that struct clk + * names are unique. Returns NULL if not found or a pointer to the + * struct clk if found. + */ +struct clk *omap_clk_get_by_name(const char *name) +{ + struct clk *c; + struct clk *ret = NULL; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(c, &clocks, node) { + if (!strcmp(c->name, name)) { + ret = c; + break; + } + } + + mutex_unlock(&clocks_mutex); + + return ret; +} + +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + +/* + * Dummy clock + * + * Used for clock aliases that are needed on some OMAPs, but not others + */ +struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_null, +}; + +/* + * + */ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); + list_for_each_entry(ck, &clocks, node) { + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || !ck->enable_reg) + continue; + + omap2_clk_disable_unused(ck); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) +/* + * debugfs support to trace clock tree hierarchy and attributes + */ + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static struct dentry *clk_debugfs_root; + +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + mutex_lock(&clocks_mutex); + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, + c->usecount); + } + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, }; +static int clk_debugfs_register_one(struct clk *c) +{ + int err; + struct dentry *d; + struct clk *pa = c->parent; + + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); + if (!d) + return -ENOMEM; + c->dent = d; + + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + if (!d) { + err = -ENOMEM; + goto err_out; + } + return 0; + +err_out: + debugfs_remove_recursive(c->dent); + return err; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent; + + if (pa && !pa->dent) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (!c->dent) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clocks, node) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} +late_initcall(clk_debugfs_init); + +#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ + diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 35ec5f3..ff9789b 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -17,8 +17,323 @@ #define __ARCH_ARM_MACH_OMAP2_CLOCK_H #include <linux/kernel.h> +#include <linux/list.h> + +#include <linux/clkdev.h> + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_242X (1 << 0) +#define CK_243X (1 << 1) /* 243x, 253x */ +#define CK_3430ES1 (1 << 2) /* 34xxES1 only */ +#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */ +#define CK_AM35XX (1 << 4) /* Sitara AM35xx */ +#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */ +#define CK_443X (1 << 6) +#define CK_TI816X (1 << 7) +#define CK_446X (1 << 8) +#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */ + + +#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) +#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) + +struct module; +struct clk; +struct clockdomain; + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* struct clksel_rate.flags possibilities */ +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) +#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ +#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ +#define RATE_IN_36XX (1 << 4) +#define RATE_IN_4430 (1 << 5) +#define RATE_IN_TI816X (1 << 6) +#define RATE_IN_4460 (1 << 7) +#define RATE_IN_AM33XX (1 << 8) +#define RATE_IN_TI814X (1 << 9) + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) +#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) +#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) +#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) + +/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ +#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) + + +/** + * struct clksel_rate - register bitfield values corresponding to clk divisors + * @val: register bitfield value (shifted to bit 0) + * @div: clock divisor corresponding to @val + * @flags: (see "struct clksel_rate.flags possibilities" above) + * + * @val should match the value of a read from struct clk.clksel_reg + * AND'ed with struct clk.clksel_mask, shifted right to bit 0. + * + * @div is the divisor that should be applied to the parent clock's rate + * to produce the current clock's rate. + */ +struct clksel_rate { + u32 val; + u8 div; + u16 flags; +}; + +/** + * struct clksel - available parent clocks, and a pointer to their divisors + * @parent: struct clk * to a possible parent clock + * @rates: available divisors for this parent clock + * + * A struct clksel is always associated with one or more struct clks + * and one or more struct clksel_rates. + */ +struct clksel { + struct clk *parent; + const struct clksel_rate *rates; +}; + +/** + * struct dpll_data - DPLL registers and integration data + * @mult_div1_reg: register containing the DPLL M and N bitfields + * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg + * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg + * @clk_bypass: struct clk pointer to the clock's bypass clock input + * @clk_ref: struct clk pointer to the clock's reference clock input + * @control_reg: register containing the DPLL mode bitfield + * @enable_mask: mask of the DPLL mode bitfield in @control_reg + * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() + * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @max_multiplier: maximum valid non-bypass multiplier value (actual) + * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() + * @min_divider: minimum valid non-bypass divider value (actual) + * @max_divider: maximum valid non-bypass divider value (actual) + * @modes: possible values of @enable_mask + * @autoidle_reg: register containing the DPLL autoidle mode bitfield + * @idlest_reg: register containing the DPLL idle status bitfield + * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg + * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg + * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs + * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs + * @flags: DPLL type/features (see below) + * + * Possible values for @flags: + * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) + * + * @freqsel_mask is only used on the OMAP34xx family and AM35xx. + * + * XXX Some DPLLs have multiple bypass inputs, so it's not technically + * correct to only have one @clk_bypass pointer. + * + * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, + * @last_rounded_n) should be separated from the runtime-fixed fields + * and placed into a different structure, so that the runtime-fixed data + * can be placed into read-only space. + */ +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned long last_rounded_rate; + u16 last_rounded_m; + u16 max_multiplier; + u8 last_rounded_n; + u8 min_divider; + u16 max_divider; + u8 modes; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; + u32 dco_mask; + u32 sddiv_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; + u8 flags; +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; -#include <plat/clock.h> /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */ #define CORE_CLK_SRC_32K 0x0 @@ -94,33 +409,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk *clk); u32 omap2_get_dpll_rate(struct clk *clk); void omap2_init_dpll_parent(struct clk *clk); -int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); - - -#ifdef CONFIG_ARCH_OMAP2 -void omap2xxx_clk_prepare_for_reboot(void); -#else -static inline void omap2xxx_clk_prepare_for_reboot(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 -void omap3_clk_prepare_for_reboot(void); -#else -static inline void omap3_clk_prepare_for_reboot(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP4 -void omap4_clk_prepare_for_reboot(void); -#else -static inline void omap4_clk_prepare_for_reboot(void) -{ -} -#endif - int omap2_dflt_clk_enable(struct clk *clk); void omap2_dflt_clk_disable(struct clk *clk); void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, @@ -139,7 +427,6 @@ extern const struct clkops clkops_dummy; extern const struct clkops clkops_omap2_dflt; extern struct clk_functions omap2_clk_functions; -extern struct clk *vclk, *sclk; extern const struct clksel_rate gpt_32k_rates[]; extern const struct clksel_rate gpt_sys_rates[]; diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index c3cde1a..608874b6 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1,7 +1,7 @@ /* * OMAP2420 clock data * - * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2011 Nokia Corporation * * Contacts: @@ -18,14 +18,12 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" @@ -126,6 +124,7 @@ static struct clk dpll_ck = { .name = "dpll_ck", .ops = &clkops_omap2xxx_dpll_ops, .parent = &sys_ck, /* Can be func_32k also */ + .init = &omap2xxx_clkt_dpllcore_init, .dpll_data = &dpll_dd, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, @@ -1926,17 +1925,12 @@ static struct omap_clk omap2420_clks[] = { int __init omap2420_clk_init(void) { - const struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate; prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; - cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST); cpu_mask = RATE_IN_242X; rate_table = omap2420_rate_table; - clk_init(&omap2_clk_functions); - for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks); c++) clk_preinit(c->lk.clk); @@ -1953,20 +1947,13 @@ int __init omap2420_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + /* Disable autoidle on all clocks; let the PM code enable it later */ omap_clk_disable_autoidle_all(); - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; + /* XXX Can this be done from the virt_prcm_set clk init function? */ + omap2xxx_clkt_vps_check_bootloader_rates(); recalculate_root_clocks(); @@ -1980,11 +1967,6 @@ int __init omap2420_clk_init(void) */ clk_enable_init_clocks(); - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - dclk = clk_get(NULL, "dpll_ck"); - return 0; } diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c index a8e3261..e37df53 100644 --- a/arch/arm/mach-omap2/clock2430.c +++ b/arch/arm/mach-omap2/clock2430.c @@ -21,13 +21,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" /** diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 22404fe..b179b6e 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1,7 +1,7 @@ /* * OMAP2430 clock data * - * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2011 Nokia Corporation * * Contacts: @@ -17,14 +17,12 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" @@ -125,6 +123,7 @@ static struct clk dpll_ck = { .name = "dpll_ck", .ops = &clkops_omap2xxx_dpll_ops, .parent = &sys_ck, /* Can be func_32k also */ + .init = &omap2xxx_clkt_dpllcore_init, .dpll_data = &dpll_dd, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, @@ -2025,17 +2024,12 @@ static struct omap_clk omap2430_clks[] = { int __init omap2430_clk_init(void) { - const struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate; prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; - cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST); cpu_mask = RATE_IN_243X; rate_table = omap2430_rate_table; - clk_init(&omap2_clk_functions); - for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks); c++) clk_preinit(c->lk.clk); @@ -2052,20 +2046,13 @@ int __init omap2430_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + /* Disable autoidle on all clocks; let the PM code enable it later */ omap_clk_disable_autoidle_all(); - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; + /* XXX Can this be done from the virt_prcm_set clk init function? */ + omap2xxx_clkt_vps_check_bootloader_rates(); recalculate_root_clocks(); @@ -2079,11 +2066,6 @@ int __init omap2430_clk_init(void) */ clk_enable_init_clocks(); - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - dclk = clk_get(NULL, "dpll_ck"); - return 0; } diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index e92be1f..5f7faeb 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -22,35 +22,17 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock2xxx.h" #include "cm.h" #include "cm-regbits-24xx.h" -struct clk *vclk, *sclk, *dclk; - /* * Omap24xx specific clock functions */ /* - * Set clocks for bypass mode for reboot to work. - */ -void omap2xxx_clk_prepare_for_reboot(void) -{ - u32 rate; - - if (vclk == NULL || sclk == NULL) - return; - - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); -} - -/* * Switch the MPU rate if specified on cmdline. We cannot do this * early until cmdline is parsed. XXX This should be removed from the * clock code and handled by the OPP layer code in the near future. diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index cb6df8c..ce809c9 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -15,10 +15,13 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk *clk); unsigned long omap2_osc_clk_recalc(struct clk *clk); unsigned long omap2_dpllcore_recalc(struct clk *clk); int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); -unsigned long omap2xxx_clk_get_core_rate(struct clk *clk); +unsigned long omap2xxx_clk_get_core_rate(void); u32 omap2xxx_get_apll_clkin(void); u32 omap2xxx_get_sysclkdiv(void); void omap2xxx_clk_prepare_for_reboot(void); +void omap2xxx_clkt_dpllcore_init(struct clk *clk); +void omap2xxx_clkt_vps_check_bootloader_rates(void); +void omap2xxx_clkt_vps_late_init(void); #ifdef CONFIG_SOC_OMAP2420 int omap2420_clk_init(void); @@ -32,9 +35,7 @@ int omap2430_clk_init(void); #define omap2430_clk_init() do { } while(0) #endif -extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll; - -extern struct clk *dclk; +extern void __iomem *prcm_clksrc_ctrl; extern const struct clkops clkops_omap2430_i2chs_wait; extern const struct clkops clkops_oscck; diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 1a45d6b..17e3de5 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -17,9 +17,8 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/clk.h> -#include <plat/clkdev_omap.h> -#include "am33xx.h" +#include "soc.h" #include "iomap.h" #include "control.h" #include "clock.h" @@ -1087,8 +1086,6 @@ int __init am33xx_clk_init(void) cpu_clkflg = CK_AM33XX; } - clk_init(&omap2_clk_functions); - for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 1fc96b9..e41819b 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -21,11 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock34xx.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" /** diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c index 2e97d08..622ea05 100644 --- a/arch/arm/mach-omap2/clock3517.c +++ b/arch/arm/mach-omap2/clock3517.c @@ -21,11 +21,9 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock3517.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" /* diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c index 0c5e25e..0e1e9e4 100644 --- a/arch/arm/mach-omap2/clock36xx.c +++ b/arch/arm/mach-omap2/clock36xx.c @@ -22,8 +22,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "clock.h" #include "clock36xx.h" diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 83bb014..3e8aca2 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -21,8 +21,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock3xxx.h" diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 1f42c9d..6cca199 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -21,8 +21,6 @@ #include <linux/list.h> #include <linux/io.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" @@ -30,7 +28,7 @@ #include "clock34xx.h" #include "clock36xx.h" #include "clock3517.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-34xx.h" @@ -3573,8 +3571,6 @@ int __init omap3xxx_clk_init(void) else dpll4_dd = dpll4_dd_34xx; - clk_init(&omap2_clk_functions); - for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 6efc30c..2a450c9 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -28,8 +28,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clkdev_omap.h> - #include "soc.h" #include "iomap.h" #include "clock.h" @@ -3366,8 +3364,6 @@ int __init omap4xxx_clk_init(void) return 0; } - clk_init(&omap2_clk_functions); - /* * Must stay commented until all OMAP SoC drivers are * converted to runtime PM, or drivers may start crashing diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 512e79a..64e5046 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -27,7 +27,8 @@ #include <linux/bitops.h> -#include <plat/clock.h> +#include "soc.h" +#include "clock.h" #include "clockdomain.h" /* clkdm_list contains all registered struct clockdomains */ diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 629576b..bc42446 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -18,9 +18,8 @@ #include <linux/spinlock.h> #include "powerdomain.h" -#include <plat/clock.h> -#include <plat/omap_hwmod.h> -#include <plat/cpu.h> +#include "clock.h" +#include "omap_hwmod.h" /* * Clockdomain flags diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c deleted file mode 100644 index 70294f5..0000000 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * OMAP2 and OMAP3 clockdomain control - * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Derived from mach-omap2/clockdomain.c written by Paul Walmsley - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <plat/prcm.h> -#include "prm.h" -#include "prm2xxx_3xxx.h" -#include "cm.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-24xx.h" -#include "cm-regbits-34xx.h" -#include "prm-regbits-24xx.h" -#include "clockdomain.h" - -static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); - return 0; -} - -static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); - return 0; -} - -static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, - PM_WKDEP, (1 << clkdm2->dep_bit)); -} - -static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) -{ - struct clkdm_dep *cd; - u32 mask = 0; - - for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { - if (!cd->clkdm) - continue; /* only happens if data is erroneous */ - - /* PRM accesses are slow, so minimize them */ - mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->wkdep_usecount, 0); - } - - omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, - PM_WKDEP); - return 0; -} - -static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); - return 0; -} - -static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit), - clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); - return 0; -} - -static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit)); -} - -static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) -{ - struct clkdm_dep *cd; - u32 mask = 0; - - for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) { - if (!cd->clkdm) - continue; /* only happens if data is erroneous */ - - /* PRM accesses are slow, so minimize them */ - mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->sleepdep_usecount, 0); - } - omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP); - return 0; -} - -static int omap2_clkdm_sleep(struct clockdomain *clkdm) -{ - omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, - clkdm->pwrdm.ptr->prcm_offs, - OMAP2_PM_PWSTCTRL); - return 0; -} - -static int omap2_clkdm_wakeup(struct clockdomain *clkdm) -{ - omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, - clkdm->pwrdm.ptr->prcm_offs, - OMAP2_PM_PWSTCTRL); - return 0; -} - -static void omap2_clkdm_allow_idle(struct clockdomain *clkdm) -{ - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_add_autodeps(clkdm); - - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); -} - -static void omap2_clkdm_deny_idle(struct clockdomain *clkdm) -{ - omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_del_autodeps(clkdm); -} - -static void _enable_hwsup(struct clockdomain *clkdm) -{ - if (cpu_is_omap24xx()) - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - else if (cpu_is_omap34xx()) - omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); -} - -static void _disable_hwsup(struct clockdomain *clkdm) -{ - if (cpu_is_omap24xx()) - omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - else if (cpu_is_omap34xx()) - omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); -} - -static int omap3_clkdm_sleep(struct clockdomain *clkdm) -{ - omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - return 0; -} - -static int omap3_clkdm_wakeup(struct clockdomain *clkdm) -{ - omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - return 0; -} - -static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->clktrctrl_mask) - return 0; - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_add_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - omap2_clkdm_wakeup(clkdm); - } - - return 0; -} - -static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->clktrctrl_mask) - return 0; - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_del_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) - omap2_clkdm_sleep(clkdm); - } - - return 0; -} - -static void omap3_clkdm_allow_idle(struct clockdomain *clkdm) -{ - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_add_autodeps(clkdm); - - omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); -} - -static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) -{ - omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_del_autodeps(clkdm); -} - -static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->clktrctrl_mask) - return 0; - - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && - (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { - omap3_clkdm_wakeup(clkdm); - return 0; - } - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_add_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - omap3_clkdm_wakeup(clkdm); - } - - return 0; -} - -static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->clktrctrl_mask) - return 0; - - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && - !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { - _enable_hwsup(clkdm); - return 0; - } - - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - _disable_hwsup(clkdm); - _clkdm_del_autodeps(clkdm); - _enable_hwsup(clkdm); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) - omap3_clkdm_sleep(clkdm); - } - - return 0; -} - -struct clkdm_ops omap2_clkdm_operations = { - .clkdm_add_wkdep = omap2_clkdm_add_wkdep, - .clkdm_del_wkdep = omap2_clkdm_del_wkdep, - .clkdm_read_wkdep = omap2_clkdm_read_wkdep, - .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, - .clkdm_sleep = omap2_clkdm_sleep, - .clkdm_wakeup = omap2_clkdm_wakeup, - .clkdm_allow_idle = omap2_clkdm_allow_idle, - .clkdm_deny_idle = omap2_clkdm_deny_idle, - .clkdm_clk_enable = omap2_clkdm_clk_enable, - .clkdm_clk_disable = omap2_clkdm_clk_disable, -}; - -struct clkdm_ops omap3_clkdm_operations = { - .clkdm_add_wkdep = omap2_clkdm_add_wkdep, - .clkdm_del_wkdep = omap2_clkdm_del_wkdep, - .clkdm_read_wkdep = omap2_clkdm_read_wkdep, - .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, - .clkdm_add_sleepdep = omap3_clkdm_add_sleepdep, - .clkdm_del_sleepdep = omap3_clkdm_del_sleepdep, - .clkdm_read_sleepdep = omap3_clkdm_read_sleepdep, - .clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps, - .clkdm_sleep = omap3_clkdm_sleep, - .clkdm_wakeup = omap3_clkdm_wakeup, - .clkdm_allow_idle = omap3_clkdm_allow_idle, - .clkdm_deny_idle = omap3_clkdm_deny_idle, - .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, - .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, -}; diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c deleted file mode 100644 index aca6388..0000000 --- a/arch/arm/mach-omap2/clockdomain33xx.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * AM33XX clockdomain control - * - * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ - * Vaibhav Hiremath <hvaibhav@ti.com> - * - * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> - -#include "clockdomain.h" -#include "cm33xx.h" - - -static int am33xx_clkdm_sleep(struct clockdomain *clkdm) -{ - am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs); - return 0; -} - -static int am33xx_clkdm_wakeup(struct clockdomain *clkdm) -{ - am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs); - return 0; -} - -static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm) -{ - am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); -} - -static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm) -{ - am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); -} - -static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm) -{ - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - return am33xx_clkdm_wakeup(clkdm); - - return 0; -} - -static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); - - if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) - am33xx_clkdm_sleep(clkdm); - - return 0; -} - -struct clkdm_ops am33xx_clkdm_operations = { - .clkdm_sleep = am33xx_clkdm_sleep, - .clkdm_wakeup = am33xx_clkdm_wakeup, - .clkdm_allow_idle = am33xx_clkdm_allow_idle, - .clkdm_deny_idle = am33xx_clkdm_deny_idle, - .clkdm_clk_enable = am33xx_clkdm_clk_enable, - .clkdm_clk_disable = am33xx_clkdm_clk_disable, -}; diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c deleted file mode 100644 index 6fc6155..0000000 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * OMAP4 clockdomain control - * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Derived from mach-omap2/clockdomain.c written by Paul Walmsley - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include "clockdomain.h" -#include "cminst44xx.h" -#include "cm44xx.h" - -static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit), - clkdm1->prcm_partition, - clkdm1->cm_inst, clkdm1->clkdm_offs + - OMAP4_CM_STATICDEP); - return 0; -} - -static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit), - clkdm1->prcm_partition, - clkdm1->cm_inst, clkdm1->clkdm_offs + - OMAP4_CM_STATICDEP); - return 0; -} - -static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1, - struct clockdomain *clkdm2) -{ - return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition, - clkdm1->cm_inst, clkdm1->clkdm_offs + - OMAP4_CM_STATICDEP, - (1 << clkdm2->dep_bit)); -} - -static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) -{ - struct clkdm_dep *cd; - u32 mask = 0; - - if (!clkdm->prcm_partition) - return 0; - - for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { - if (!cd->clkdm) - continue; /* only happens if data is erroneous */ - - mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->wkdep_usecount, 0); - } - - omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs + - OMAP4_CM_STATICDEP); - return 0; -} - -static int omap4_clkdm_sleep(struct clockdomain *clkdm) -{ - omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); - return 0; -} - -static int omap4_clkdm_wakeup(struct clockdomain *clkdm) -{ - omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); - return 0; -} - -static void omap4_clkdm_allow_idle(struct clockdomain *clkdm) -{ - omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); -} - -static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) -{ - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - omap4_clkdm_wakeup(clkdm); - else - omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, - clkdm->clkdm_offs); -} - -static int omap4_clkdm_clk_enable(struct clockdomain *clkdm) -{ - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - return omap4_clkdm_wakeup(clkdm); - - return 0; -} - -static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) -{ - bool hwsup = false; - - if (!clkdm->prcm_partition) - return 0; - - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && - !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { - omap4_clkdm_allow_idle(clkdm); - return 0; - } - - hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); - - if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) - omap4_clkdm_sleep(clkdm); - - return 0; -} - -struct clkdm_ops omap4_clkdm_operations = { - .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep, - .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep, - .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep, - .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps, - .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep, - .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep, - .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep, - .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps, - .clkdm_sleep = omap4_clkdm_sleep, - .clkdm_wakeup = omap4_clkdm_wakeup, - .clkdm_allow_idle = omap4_clkdm_allow_idle, - .clkdm_deny_idle = omap4_clkdm_deny_idle, - .clkdm_clk_enable = omap4_clkdm_clk_enable, - .clkdm_clk_disable = omap4_clkdm_clk_disable, -}; diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c index 5c74185..7e76bec 100644 --- a/arch/arm/mach-omap2/clockdomains2420_data.c +++ b/arch/arm/mach-omap2/clockdomains2420_data.c @@ -35,6 +35,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c index f096175..b923007 100644 --- a/arch/arm/mach-omap2/clockdomains2430_data.c +++ b/arch/arm/mach-omap2/clockdomains2430_data.c @@ -35,6 +35,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 933a35c..e6b91e5 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -33,6 +33,7 @@ #include <linux/kernel.h> #include <linux/io.h> +#include "soc.h" #include "clockdomain.h" #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 6862904..11eaf16 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -333,7 +333,9 @@ #define OMAP24XX_EN_DPLL_MASK (0x3 << 0) /* CM_IDLEST_CKGEN */ +#define OMAP24XX_ST_54M_APLL_SHIFT 9 #define OMAP24XX_ST_54M_APLL_MASK (1 << 9) +#define OMAP24XX_ST_96M_APLL_SHIFT 8 #define OMAP24XX_ST_96M_APLL_MASK (1 << 8) #define OMAP24XX_ST_54M_CLK_MASK (1 << 6) #define OMAP24XX_ST_12M_CLK_MASK (1 << 5) diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index f24e3f7..93473f9 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -1,7 +1,7 @@ /* * OMAP2+ Clock Management prototypes * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley @@ -22,6 +22,12 @@ */ #define MAX_MODULE_READY_TIME 2000 +# ifndef __ASSEMBLER__ +extern void __iomem *cm_base; +extern void __iomem *cm2_base; +extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2); +# endif + /* * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for * the PRCM to request that a module enter the inactive state in the @@ -33,4 +39,26 @@ */ #define MAX_MODULE_DISABLE_TIME 5000 +# ifndef __ASSEMBLER__ + +/** + * struct cm_ll_data - fn ptrs to per-SoC CM function implementations + * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl + * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl + */ +struct cm_ll_data { + int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id); + int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); +}; + +extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id); +extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); + +extern int cm_register(struct cm_ll_data *cld); +extern int cm_unregister(struct cm_ll_data *cld); + +# endif + #endif diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c new file mode 100644 index 0000000..db65069 --- /dev/null +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -0,0 +1,381 @@ +/* + * OMAP2xxx CM module functions + * + * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc. + * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "soc.h" +#include "iomap.h" +#include "common.h" +#include "prm2xxx.h" +#include "cm.h" +#include "cm2xxx.h" +#include "cm-regbits-24xx.h" +#include "clockdomain.h" + +/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */ +#define DPLL_AUTOIDLE_DISABLE 0x0 +#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3 + +/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */ +#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0 +#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 + +/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */ +#define EN_APLL_LOCKED 3 + +static const u8 omap2xxx_cm_idlest_offs[] = { + CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4 +}; + +/* + * + */ + +static void _write_clktrctrl(u8 c, s16 module, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); + v &= ~mask; + v |= c << __ffs(mask); + omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL); +} + +bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); + v &= mask; + v >>= __ffs(mask); + + return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; +} + +void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) +{ + _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask); +} + +void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) +{ + _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask); +} + +/* + * DPLL autoidle control + */ + +static void _omap2xxx_set_dpll_autoidle(u8 m) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + v &= ~OMAP24XX_AUTO_DPLL_MASK; + v |= m << OMAP24XX_AUTO_DPLL_SHIFT; + omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); +} + +void omap2xxx_cm_set_dpll_disable_autoidle(void) +{ + _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP); +} + +void omap2xxx_cm_set_dpll_auto_low_power_stop(void) +{ + _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE); +} + +/* + * APLL control + */ + +static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + v &= ~mask; + v |= m << __ffs(mask); + omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); +} + +void omap2xxx_cm_set_apll54_disable_autoidle(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, + OMAP24XX_AUTO_54M_MASK); +} + +void omap2xxx_cm_set_apll54_auto_low_power_stop(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, + OMAP24XX_AUTO_54M_MASK); +} + +void omap2xxx_cm_set_apll96_disable_autoidle(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, + OMAP24XX_AUTO_96M_MASK); +} + +void omap2xxx_cm_set_apll96_auto_low_power_stop(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, + OMAP24XX_AUTO_96M_MASK); +} + +/* Enable an APLL if off */ +static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit) +{ + u32 v, m; + + m = EN_APLL_LOCKED << enable_bit; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + if (v & m) + return 0; /* apll already enabled */ + + v |= m; + omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); + + omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit); + + /* + * REVISIT: Should we return an error code if + * omap2xxx_cm_wait_module_ready() fails? + */ + return 0; +} + +/* Stop APLL */ +static void _omap2xxx_apll_disable(u8 enable_bit) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + v &= ~(EN_APLL_LOCKED << enable_bit); + omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); +} + +/* Enable an APLL if off */ +int omap2xxx_cm_apll54_enable(void) +{ + return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT, + OMAP24XX_ST_54M_APLL_SHIFT); +} + +/* Enable an APLL if off */ +int omap2xxx_cm_apll96_enable(void) +{ + return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT, + OMAP24XX_ST_96M_APLL_SHIFT); +} + +/* Stop APLL */ +void omap2xxx_cm_apll54_disable(void) +{ + _omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT); +} + +/* Stop APLL */ +void omap2xxx_cm_apll96_disable(void) +{ + _omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT); +} + +/** + * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * XXX This function is only needed until absolute register addresses are + * removed from the OMAP struct clk records. + */ +int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + unsigned long offs; + u8 idlest_offs; + int i; + + if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff)) + return -EINVAL; + + idlest_offs = (unsigned long)idlest_reg & 0xff; + for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) { + if (idlest_offs == omap2xxx_cm_idlest_offs[i]) { + *idlest_reg_id = i + 1; + break; + } + } + + if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs)) + return -EINVAL; + + offs = idlest_reg - cm_base; + offs &= 0xff00; + *prcm_inst = offs; + + return 0; +} + +/* + * + */ + +/** + * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby + * @prcm_mod: PRCM module offset + * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success or -EBUSY if the module doesn't enable in time. + */ +int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +{ + int ena = 0, i = 0; + u8 cm_idlest_reg; + u32 mask; + + if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs))) + return -EINVAL; + + cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1]; + + mask = 1 << idlest_shift; + ena = mask; + + omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & + mask) == ena), MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/* Clockdomain low-level functions */ + +static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); + + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + +static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm) +{ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} + +static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_add_autodeps(clkdm); + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap2xxx_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_del_autodeps(clkdm); + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap2xxx_clkdm_sleep(clkdm); + } + + return 0; +} + +struct clkdm_ops omap2_clkdm_operations = { + .clkdm_add_wkdep = omap2_clkdm_add_wkdep, + .clkdm_del_wkdep = omap2_clkdm_del_wkdep, + .clkdm_read_wkdep = omap2_clkdm_read_wkdep, + .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, + .clkdm_sleep = omap2xxx_clkdm_sleep, + .clkdm_wakeup = omap2xxx_clkdm_wakeup, + .clkdm_allow_idle = omap2xxx_clkdm_allow_idle, + .clkdm_deny_idle = omap2xxx_clkdm_deny_idle, + .clkdm_clk_enable = omap2xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap2xxx_clkdm_clk_disable, +}; + +/* + * + */ + +static struct cm_ll_data omap2xxx_cm_ll_data = { + .split_idlest_reg = &omap2xxx_cm_split_idlest_reg, + .wait_module_ready = &omap2xxx_cm_wait_module_ready, +}; + +int __init omap2xxx_cm_init(void) +{ + if (!cpu_is_omap24xx()) + return 0; + + return cm_register(&omap2xxx_cm_ll_data); +} + +static void __exit omap2xxx_cm_exit(void) +{ + if (!cpu_is_omap24xx()) + return; + + /* Should never happen */ + WARN(cm_unregister(&omap2xxx_cm_ll_data), + "%s: cm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap2xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h new file mode 100644 index 0000000..4cbb39b --- /dev/null +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -0,0 +1,70 @@ +/* + * OMAP2xxx Clock Management (CM) register definitions + * + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. + * Copyright (C) 2007-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The CM hardware modules on the OMAP2/3 are quite similar to each + * other. The CM modules/instances on OMAP4 are quite different, so + * they are handled in a separate file. + */ +#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H +#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H + +#include "prcm-common.h" +#include "cm2xxx_3xxx.h" + +#define OMAP2420_CM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) +#define OMAP2430_CM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) + +/* + * Module specific CM register offsets from CM_BASE + domain offset + * Use cm_{read,write}_mod_reg() with these registers. + * These register offsets generally appear in more than one PRCM submodule. + */ + +/* OMAP2-specific register offsets */ + +#define OMAP24XX_CM_FCLKEN2 0x0004 +#define OMAP24XX_CM_ICLKEN4 0x001c +#define OMAP24XX_CM_AUTOIDLE4 0x003c +#define OMAP24XX_CM_IDLEST4 0x002c + +/* CM_IDLEST bit field values to indicate deasserted IdleReq */ + +#define OMAP24XX_CM_IDLEST_VAL 0 + + +/* Clock management domain register get/set */ + +#ifndef __ASSEMBLER__ + +extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); +extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); + +extern void omap2xxx_cm_set_dpll_disable_autoidle(void); +extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void); + +extern void omap2xxx_cm_set_apll54_disable_autoidle(void); +extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void); +extern void omap2xxx_cm_set_apll96_disable_autoidle(void); +extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void); + +extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask); +extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, + u8 idlest_shift); +extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, + s16 *prcm_inst, u8 *idlest_reg_id); + +extern int __init omap2xxx_cm_init(void); + +#endif + +#endif diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index 57b2f3c..98e6b3c 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -16,28 +16,7 @@ #ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H #define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H -#include "prcm-common.h" - -#define OMAP2420_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) -#define OMAP2430_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) -#define OMAP34XX_CM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) - - -/* - * OMAP3-specific global CM registers - * Use cm_{read,write}_reg() with these registers. - * These registers appear once per CM module. - */ - -#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) - -#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 -#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) +#include "cm.h" /* * Module specific CM register offsets from CM_BASE + domain offset @@ -57,6 +36,7 @@ #define CM_IDLEST 0x0020 #define CM_IDLEST1 CM_IDLEST #define CM_IDLEST2 0x0024 +#define OMAP2430_CM_IDLEST3 0x0028 #define CM_AUTOIDLE 0x0030 #define CM_AUTOIDLE1 CM_AUTOIDLE #define CM_AUTOIDLE2 0x0034 @@ -66,70 +46,60 @@ #define CM_CLKSEL2 0x0044 #define OMAP2_CM_CLKSTCTRL 0x0048 -/* OMAP2-specific register offsets */ - -#define OMAP24XX_CM_FCLKEN2 0x0004 -#define OMAP24XX_CM_ICLKEN4 0x001c -#define OMAP24XX_CM_AUTOIDLE4 0x003c -#define OMAP24XX_CM_IDLEST4 0x002c - -#define OMAP2430_CM_IDLEST3 0x0028 - -/* OMAP3-specific register offsets */ - -#define OMAP3430_CM_CLKEN_PLL 0x0004 -#define OMAP3430ES2_CM_CLKEN2 0x0004 -#define OMAP3430ES2_CM_FCLKEN3 0x0008 -#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2 -#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2 -#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2 -#define OMAP3430_CM_CLKSEL1 CM_CLKSEL -#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL -#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2 -#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2 -#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL -#define OMAP3430_CM_CLKSTST 0x004c -#define OMAP3430ES2_CM_CLKSEL4 0x004c -#define OMAP3430ES2_CM_CLKSEL5 0x0050 -#define OMAP3430_CM_CLKSEL2_EMU 0x0050 -#define OMAP3430_CM_CLKSEL3_EMU 0x0054 +#ifndef __ASSEMBLER__ +#include <linux/io.h> -/* CM_IDLEST bit field values to indicate deasserted IdleReq */ +static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx) +{ + return __raw_readl(cm_base + module + idx); +} -#define OMAP24XX_CM_IDLEST_VAL 0 -#define OMAP34XX_CM_IDLEST_VAL 1 +static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + __raw_writel(val, cm_base + module + idx); +} +/* Read-modify-write a register in a CM module. Caller must lock */ +static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, + s16 idx) +{ + u32 v; -/* Clock management domain register get/set */ + v = omap2_cm_read_mod_reg(module, idx); + v &= ~mask; + v |= bits; + omap2_cm_write_mod_reg(v, module, idx); -#ifndef __ASSEMBLER__ + return v; +} -extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx); -extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx); -extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); +/* Read a CM register, AND it, and shift the result down to bit 0 */ +static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + u32 v; -extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, - u8 idlest_shift); -extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx); -extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx); + v = omap2_cm_read_mod_reg(domain, idx); + v &= mask; + v >>= __ffs(mask); -extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask); -extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); -extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); + return v; +} -extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask); +static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx); +} -extern void omap2xxx_cm_set_dpll_disable_autoidle(void); -extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void); +static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx); +} -extern void omap2xxx_cm_set_apll54_disable_autoidle(void); -extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void); -extern void omap2xxx_cm_set_apll96_disable_autoidle(void); -extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void); +extern int omap2xxx_cm_apll54_enable(void); +extern void omap2xxx_cm_apll54_disable(void); +extern int omap2xxx_cm_apll96_enable(void); +extern void omap2xxx_cm_apll96_disable(void); #endif @@ -146,11 +116,4 @@ extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void); /* CM_IDLEST_GFX */ #define OMAP_ST_GFX_MASK (1 << 0) - -/* Function prototypes */ -# ifndef __ASSEMBLER__ -extern void omap3_cm_save_context(void); -extern void omap3_cm_restore_context(void); -# endif - #endif diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 13f56ea..058ce3c 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -22,8 +22,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> - +#include "clockdomain.h" #include "cm.h" #include "cm33xx.h" #include "cm-regbits-34xx.h" @@ -311,3 +310,58 @@ void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs) v &= ~AM33XX_MODULEMODE_MASK; am33xx_cm_write_reg(v, inst, clkctrl_offs); } + +/* + * Clockdomain low-level functions + */ + +static int am33xx_clkdm_sleep(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static int am33xx_clkdm_wakeup(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm) +{ + am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); +} + +static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + return am33xx_clkdm_wakeup(clkdm); + + return 0; +} + +static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + am33xx_clkdm_sleep(clkdm); + + return 0; +} + +struct clkdm_ops am33xx_clkdm_operations = { + .clkdm_sleep = am33xx_clkdm_sleep, + .clkdm_wakeup = am33xx_clkdm_wakeup, + .clkdm_allow_idle = am33xx_clkdm_allow_idle, + .clkdm_deny_idle = am33xx_clkdm_deny_idle, + .clkdm_clk_enable = am33xx_clkdm_clk_enable, + .clkdm_clk_disable = am33xx_clkdm_clk_disable, +}; diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 7f07ab0..c2086f2 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -1,8 +1,10 @@ /* - * OMAP2/3 CM module functions + * OMAP3xxx CM module functions * * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc. * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,8 +14,6 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> @@ -21,56 +21,16 @@ #include "soc.h" #include "iomap.h" #include "common.h" +#include "prm2xxx_3xxx.h" #include "cm.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-24xx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" +#include "clockdomain.h" -/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */ -#define DPLL_AUTOIDLE_DISABLE 0x0 -#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3 - -/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */ -#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0 -#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 - -static const u8 cm_idlest_offs[] = { - CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4 +static const u8 omap3xxx_cm_idlest_offs[] = { + CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3 }; -u32 omap2_cm_read_mod_reg(s16 module, u16 idx) -{ - return __raw_readl(cm_base + module + idx); -} - -void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) -{ - __raw_writel(val, cm_base + module + idx); -} - -/* Read-modify-write a register in a CM module. Caller must lock */ -u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) -{ - u32 v; - - v = omap2_cm_read_mod_reg(module, idx); - v &= ~mask; - v |= bits; - omap2_cm_write_mod_reg(v, module, idx); - - return v; -} - -u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx); -} - -u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx); -} - /* * */ @@ -85,33 +45,15 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask) omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL); } -bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask) +bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) { u32 v; - bool ret = 0; - - BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx()); v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); v &= mask; v >>= __ffs(mask); - if (cpu_is_omap24xx()) - ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; - else - ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; - - return ret; -} - -void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) -{ - _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask); -} - -void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) -{ - _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask); + return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; } void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) @@ -135,109 +77,247 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask) } /* - * DPLL autoidle control + * */ -static void _omap2xxx_set_dpll_autoidle(u8 m) +/** + * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby + * @prcm_mod: PRCM module offset + * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success or -EBUSY if the module doesn't enable in time. + */ +int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) { - u32 v; + int ena = 0, i = 0; + u8 cm_idlest_reg; + u32 mask; - v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); - v &= ~OMAP24XX_AUTO_DPLL_MASK; - v |= m << OMAP24XX_AUTO_DPLL_SHIFT; - omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); -} + if (!idlest_id || (idlest_id > ARRAY_SIZE(omap3xxx_cm_idlest_offs))) + return -EINVAL; -void omap2xxx_cm_set_dpll_disable_autoidle(void) -{ - _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP); + cm_idlest_reg = omap3xxx_cm_idlest_offs[idlest_id - 1]; + + mask = 1 << idlest_shift; + ena = 0; + + omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & + mask) == ena), MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } -void omap2xxx_cm_set_dpll_auto_low_power_stop(void) +/** + * omap3xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * XXX This function is only needed until absolute register addresses are + * removed from the OMAP struct clk records. + */ +int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) { - _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE); + unsigned long offs; + u8 idlest_offs; + int i; + + if (idlest_reg < (cm_base + OMAP3430_IVA2_MOD) || + idlest_reg > (cm_base + 0x1ffff)) + return -EINVAL; + + idlest_offs = (unsigned long)idlest_reg & 0xff; + for (i = 0; i < ARRAY_SIZE(omap3xxx_cm_idlest_offs); i++) { + if (idlest_offs == omap3xxx_cm_idlest_offs[i]) { + *idlest_reg_id = i + 1; + break; + } + } + + if (i == ARRAY_SIZE(omap3xxx_cm_idlest_offs)) + return -EINVAL; + + offs = idlest_reg - cm_base; + offs &= 0xff00; + *prcm_inst = offs; + + return 0; } -/* - * APLL autoidle control - */ +/* Clockdomain low-level operations */ -static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask) +static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { - u32 v; + omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; +} - v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); - v &= ~mask; - v |= m << __ffs(mask); - omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); +static int omap3xxx_clkdm_del_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; } -void omap2xxx_cm_set_apll54_disable_autoidle(void) +static int omap3xxx_clkdm_read_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { - _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, - OMAP24XX_AUTO_54M_MASK); + return omap2_cm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP, + (1 << clkdm2->dep_bit)); } -void omap2xxx_cm_set_apll54_auto_low_power_stop(void) +static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) { - _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, - OMAP24XX_AUTO_54M_MASK); + struct clkdm_dep *cd; + u32 mask = 0; + + for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) { + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->sleepdep_usecount, 0); + } + omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, + OMAP3430_CM_SLEEPDEP); + return 0; } -void omap2xxx_cm_set_apll96_disable_autoidle(void) +static int omap3xxx_clkdm_sleep(struct clockdomain *clkdm) { - _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, - OMAP24XX_AUTO_96M_MASK); + omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; } -void omap2xxx_cm_set_apll96_auto_low_power_stop(void) +static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm) { - _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, - OMAP24XX_AUTO_96M_MASK); + omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; } -/* - * - */ +static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); -/** - * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby - * @prcm_mod: PRCM module offset - * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) - * @idlest_shift: shift of the bit in the CM_IDLEST* register to check - * - * XXX document - */ -int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + +static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm) { - int ena = 0, i = 0; - u8 cm_idlest_reg; - u32 mask; + omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); - if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs))) - return -EINVAL; + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} - cm_idlest_reg = cm_idlest_offs[idlest_id - 1]; +static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; - mask = 1 << idlest_shift; + if (!clkdm->clktrctrl_mask) + return 0; - if (cpu_is_omap24xx()) - ena = mask; - else if (cpu_is_omap34xx()) - ena = 0; - else - BUG(); + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && + (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { + omap3xxx_clkdm_wakeup(clkdm); + return 0; + } + + hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_add_autodeps(clkdm); + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap3xxx_clkdm_wakeup(clkdm); + } + + return 0; +} - omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena), - MAX_MODULE_READY_TIME, i); +static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + if (!clkdm->clktrctrl_mask) + return 0; + + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + return 0; + } + + hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_del_autodeps(clkdm); + omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap3xxx_clkdm_sleep(clkdm); + } + + return 0; } +struct clkdm_ops omap3_clkdm_operations = { + .clkdm_add_wkdep = omap2_clkdm_add_wkdep, + .clkdm_del_wkdep = omap2_clkdm_del_wkdep, + .clkdm_read_wkdep = omap2_clkdm_read_wkdep, + .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, + .clkdm_add_sleepdep = omap3xxx_clkdm_add_sleepdep, + .clkdm_del_sleepdep = omap3xxx_clkdm_del_sleepdep, + .clkdm_read_sleepdep = omap3xxx_clkdm_read_sleepdep, + .clkdm_clear_all_sleepdeps = omap3xxx_clkdm_clear_all_sleepdeps, + .clkdm_sleep = omap3xxx_clkdm_sleep, + .clkdm_wakeup = omap3xxx_clkdm_wakeup, + .clkdm_allow_idle = omap3xxx_clkdm_allow_idle, + .clkdm_deny_idle = omap3xxx_clkdm_deny_idle, + .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, +}; + /* * Context save/restore code - OMAP3 only */ -#ifdef CONFIG_ARCH_OMAP3 struct omap3_cm_regs { u32 iva2_cm_clksel1; u32 iva2_cm_clksel2; @@ -555,4 +635,31 @@ void omap3_cm_restore_context(void) omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD, OMAP3_CM_CLKOUT_CTRL_OFFSET); } -#endif + +/* + * + */ + +static struct cm_ll_data omap3xxx_cm_ll_data = { + .split_idlest_reg = &omap3xxx_cm_split_idlest_reg, + .wait_module_ready = &omap3xxx_cm_wait_module_ready, +}; + +int __init omap3xxx_cm_init(void) +{ + if (!cpu_is_omap34xx()) + return 0; + + return cm_register(&omap3xxx_cm_ll_data); +} + +static void __exit omap3xxx_cm_exit(void) +{ + if (!cpu_is_omap34xx()) + return; + + /* Should never happen */ + WARN(cm_unregister(&omap3xxx_cm_ll_data), + "%s: cm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap3xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h new file mode 100644 index 0000000..e8e146f --- /dev/null +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -0,0 +1,91 @@ +/* + * OMAP2/3 Clock Management (CM) register definitions + * + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The CM hardware modules on the OMAP2/3 are quite similar to each + * other. The CM modules/instances on OMAP4 are quite different, so + * they are handled in a separate file. + */ +#ifndef __ARCH_ASM_MACH_OMAP2_CM3XXX_H +#define __ARCH_ASM_MACH_OMAP2_CM3XXX_H + +#include "prcm-common.h" +#include "cm2xxx_3xxx.h" + +#define OMAP34XX_CM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) + + +/* + * OMAP3-specific global CM registers + * Use cm_{read,write}_reg() with these registers. + * These registers appear once per CM module. + */ + +#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) + +#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) + +/* + * Module specific CM register offsets from CM_BASE + domain offset + * Use cm_{read,write}_mod_reg() with these registers. + * These register offsets generally appear in more than one PRCM submodule. + */ + +/* OMAP3-specific register offsets */ + +#define OMAP3430_CM_CLKEN_PLL 0x0004 +#define OMAP3430ES2_CM_CLKEN2 0x0004 +#define OMAP3430ES2_CM_FCLKEN3 0x0008 +#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2 +#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2 +#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2 +#define OMAP3430_CM_CLKSEL1 CM_CLKSEL +#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL +#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2 +#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2 +#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL +#define OMAP3430_CM_CLKSTST 0x004c +#define OMAP3430ES2_CM_CLKSEL4 0x004c +#define OMAP3430ES2_CM_CLKSEL5 0x0050 +#define OMAP3430_CM_CLKSEL2_EMU 0x0050 +#define OMAP3430_CM_CLKSEL3_EMU 0x0054 + + +/* CM_IDLEST bit field values to indicate deasserted IdleReq */ + +#define OMAP34XX_CM_IDLEST_VAL 1 + + +#ifndef __ASSEMBLER__ + +extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); +extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); +extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask); +extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask); + +extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask); +extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, + u8 idlest_shift); + +extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, + s16 *prcm_inst, u8 *idlest_reg_id); + +extern void omap3_cm_save_context(void); +extern void omap3_cm_restore_context(void); + +extern int __init omap3xxx_cm_init(void); + +#endif + +#endif diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c new file mode 100644 index 0000000..40b3b5a --- /dev/null +++ b/arch/arm/mach-omap2/cm_common.c @@ -0,0 +1,140 @@ +/* + * OMAP2+ common Clock Management (CM) IP block functions + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * XXX This code should eventually be moved to a CM driver. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> + +#include "cm2xxx.h" +#include "cm3xxx.h" +#include "cm44xx.h" +#include "common.h" + +/* + * cm_ll_data: function pointers to SoC-specific implementations of + * common CM functions + */ +static struct cm_ll_data null_cm_ll_data; +static struct cm_ll_data *cm_ll_data = &null_cm_ll_data; + +/* cm_base: base virtual address of the CM IP block */ +void __iomem *cm_base; + +/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */ +void __iomem *cm2_base; + +/** + * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use) + * @cm: CM base virtual address + * @cm2: CM2 base virtual address (if present on the booted SoC) + * + * XXX Will be replaced when the PRM/CM drivers are completed. + */ +void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2) +{ + cm_base = cm; + cm2_base = cm2; +} + +/** + * cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * Given an absolute CM_IDLEST register address @idlest_reg, passes + * the PRCM instance offset and IDLEST register ID back to the caller + * via the @prcm_inst and @idlest_reg_id. Returns -EINVAL upon error, + * or 0 upon success. XXX This function is only needed until absolute + * register addresses are removed from the OMAP struct clk records. + */ +int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + if (!cm_ll_data->split_idlest_reg) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst, + idlest_reg_id); +} + +/** + * cm_wait_module_ready - wait for a module to leave idle or standby + * @prcm_mod: PRCM module offset + * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success, -EBUSY if the module doesn't enable in time, or -EINVAL if + * no per-SoC wait_module_ready() function pointer has been registered + * or if the idlest register is unknown on the SoC. + */ +int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +{ + if (!cm_ll_data->wait_module_ready) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift); +} + +/** + * cm_register - register per-SoC low-level data with the CM + * @cld: low-level per-SoC OMAP CM data & function pointers to register + * + * Register per-SoC low-level OMAP CM data and function pointers with + * the OMAP CM common interface. The caller must keep the data + * pointed to by @cld valid until it calls cm_unregister() and + * it returns successfully. Returns 0 upon success, -EINVAL if @cld + * is NULL, or -EEXIST if cm_register() has already been called + * without an intervening cm_unregister(). + */ +int cm_register(struct cm_ll_data *cld) +{ + if (!cld) + return -EINVAL; + + if (cm_ll_data != &null_cm_ll_data) + return -EEXIST; + + cm_ll_data = cld; + + return 0; +} + +/** + * cm_unregister - unregister per-SoC low-level data & function pointers + * @cld: low-level per-SoC OMAP CM data & function pointers to unregister + * + * Unregister per-SoC low-level OMAP CM data and function pointers + * that were previously registered with cm_register(). The + * caller may not destroy any of the data pointed to by @cld until + * this function returns successfully. Returns 0 upon success, or + * -EINVAL if @cld is NULL or if @cld does not match the struct + * cm_ll_data * previously registered by cm_register(). + */ +int cm_unregister(struct cm_ll_data *cld) +{ + if (!cld || cm_ll_data != cld) + return -EINVAL; + + cm_ll_data = &null_cm_ll_data; + + return 0; +} diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 1894015..7f9a464 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -2,8 +2,9 @@ * OMAP4 CM instance functions * * Copyright (C) 2009 Nokia Corporation - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2008-2011 Texas Instruments, Inc. * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,6 +23,7 @@ #include "iomap.h" #include "common.h" +#include "clockdomain.h" #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" @@ -343,3 +345,141 @@ void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, v &= ~OMAP4430_MODULEMODE_MASK; omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs); } + +/* + * Clockdomain low-level functions + */ + +static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit), + clkdm1->prcm_partition, + clkdm1->cm_inst, clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} + +static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit), + clkdm1->prcm_partition, + clkdm1->cm_inst, clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} + +static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition, + clkdm1->cm_inst, + clkdm1->clkdm_offs + + OMAP4_CM_STATICDEP, + (1 << clkdm2->dep_bit)); +} + +static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) +{ + struct clkdm_dep *cd; + u32 mask = 0; + + if (!clkdm->prcm_partition) + return 0; + + for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->wkdep_usecount, 0); + } + + omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs + + OMAP4_CM_STATICDEP); + return 0; +} + +static int omap4_clkdm_sleep(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static int omap4_clkdm_wakeup(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + return 0; +} + +static void omap4_clkdm_allow_idle(struct clockdomain *clkdm) +{ + omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); +} + +static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap4_clkdm_wakeup(clkdm); + else + omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, + clkdm->clkdm_offs); +} + +static int omap4_clkdm_clk_enable(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + return omap4_clkdm_wakeup(clkdm); + + return 0; +} + +static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->prcm_partition) + return 0; + + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + omap4_clkdm_allow_idle(clkdm); + return 0; + } + + hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, + clkdm->cm_inst, clkdm->clkdm_offs); + + if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + omap4_clkdm_sleep(clkdm); + + return 0; +} + +struct clkdm_ops omap4_clkdm_operations = { + .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep, + .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep, + .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep, + .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps, + .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep, + .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep, + .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep, + .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps, + .clkdm_sleep = omap4_clkdm_sleep, + .clkdm_wakeup = omap4_clkdm_wakeup, + .clkdm_allow_idle = omap4_clkdm_allow_idle, + .clkdm_deny_idle = omap4_clkdm_deny_idle, + .clkdm_clk_enable = omap4_clkdm_clk_enable, + .clkdm_clk_disable = omap4_clkdm_clk_disable, +}; diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index d69fdef..bd7bab8 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -38,4 +38,6 @@ extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask); +extern void omap_cm_base_init(void); + #endif diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 48daac2..d246efd 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -25,7 +25,6 @@ #include <linux/spi/ads7846.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include "common-board-devices.h" @@ -64,30 +63,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } + /* + * If a board defines get_pendown_state() function, request the pendown + * GPIO and set the GPIO debounce time. + * If a board does not define the get_pendown_state() function, then + * the ads7846 driver will setup the pendown GPIO itself. + */ + if (board_pdata && board_pdata->get_pendown_state) { + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; + } + + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + gpio_export(gpio_pendown, 0); + } spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); + ads7846_config.gpio_pendown = gpio_pendown; + if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; + board_pdata->gpio_pendown_debounce = gpio_debounce; spi_bi->platform_data = board_pdata; - if (board_pdata->get_pendown_state) - gpio_export(gpio_pendown, 0); - } else { - ads7846_config.gpio_pendown = gpio_pendown; } - if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) - gpio_free(gpio_pendown); - spi_register_board_info(&ads7846_spi_board_info, 1); } #else @@ -96,48 +101,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, { } #endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct omap_nand_platform_data nand_data; - -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - pr_info("NAND: Unable to find configuration in GPMC\n"); - return; - } - - if (nandcs < GPMC_CS_NUM) { - nand_data.cs = nandcs; - nand_data.parts = parts; - nand_data.nr_parts = nr_parts; - nand_data.devsize = options; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} -#else -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ -} -#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a428..72bb41b 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -10,6 +10,5 @@ struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); -void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 17950c6..5c2fd48 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -14,189 +14,26 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> +#include <linux/platform_data/dsp-omap.h> -#include <plat/clock.h> +#include <plat/vram.h> -#include "soc.h" -#include "iomap.h" #include "common.h" -#include "sdrc.h" -#include "control.h" - -/* Global address base setup code */ - -static void __init __omap2_set_globals(struct omap_globals *omap2_globals) -{ - omap2_set_globals_tap(omap2_globals); - omap2_set_globals_sdrc(omap2_globals); - omap2_set_globals_control(omap2_globals); - omap2_set_globals_prcm(omap2_globals); -} - -#if defined(CONFIG_SOC_OMAP2420) - -static struct omap_globals omap242x_globals = { - .class = OMAP242X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x48014000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), -}; - -void __init omap2_set_globals_242x(void) -{ - __omap2_set_globals(&omap242x_globals); -} - -void __init omap242x_map_io(void) -{ - omap242x_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_OMAP2430) - -static struct omap_globals omap243x_globals = { - .class = OMAP243X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), -}; - -void __init omap2_set_globals_243x(void) -{ - __omap2_set_globals(&omap243x_globals); -} - -void __init omap243x_map_io(void) -{ - omap243x_map_common_io(); -} -#endif - -#if defined(CONFIG_ARCH_OMAP3) - -static struct omap_globals omap3_globals = { - .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), -}; - -void __init omap2_set_globals_3xxx(void) -{ - __omap2_set_globals(&omap3_globals); -} - -void __init omap3_map_io(void) -{ - omap34xx_map_common_io(); -} +#include "omap-secure.h" /* - * Adjust TAP register base such that omap3_check_revision accesses the correct - * TI81XX register for checking device ID (it adds 0x204 to tap base while - * TI81XX DEVICE ID register is at offset 0x600 from control base). + * Stub function for OMAP2 so that common files + * continue to build when custom builds are used */ -#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \ - TI81XX_CONTROL_DEVICE_ID - 0x204) - -static struct omap_globals ti81xx_globals = { - .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), -}; - -void __init omap2_set_globals_ti81xx(void) -{ - __omap2_set_globals(&ti81xx_globals); -} - -void __init ti81xx_map_io(void) -{ - omapti81xx_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_AM33XX) -#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \ - TI81XX_CONTROL_DEVICE_ID - 0x204) - -static struct omap_globals am33xx_globals = { - .class = AM335X_CLASS, - .tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE), - .ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), - .prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), - .cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), -}; - -void __init omap2_set_globals_am33xx(void) -{ - __omap2_set_globals(&am33xx_globals); -} - -void __init am33xx_map_io(void) -{ - omapam33xx_map_common_io(); -} -#endif - -#if defined(CONFIG_ARCH_OMAP4) -static struct omap_globals omap4_globals = { - .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), - .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), - .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE), -}; - -void __init omap2_set_globals_443x(void) -{ - __omap2_set_globals(&omap4_globals); -} - -void __init omap4_map_io(void) -{ - omap44xx_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_OMAP5) -static struct omap_globals omap5_globals = { - .class = OMAP54XX_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), - .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), - .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE), - .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE), -}; - -void __init omap2_set_globals_5xxx(void) +int __weak omap_secure_ram_reserve_memblock(void) { - omap2_set_globals_tap(&omap5_globals); - omap2_set_globals_control(&omap5_globals); - omap2_set_globals_prcm(&omap5_globals); + return 0; } -void __init omap5_map_io(void) +void __init omap_reserve(void) { - omap5_map_common_io(); + omap_vram_reserve_sdram_memblock(); + omap_dsp_reserve_sdram_memblock(); + omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } -#endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 7045e4d..948bcaa 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -28,63 +28,18 @@ #include <linux/irq.h> #include <linux/delay.h> +#include <linux/i2c.h> #include <linux/i2c/twl.h> +#include <linux/i2c-omap.h> #include <asm/proc-fns.h> -#include <plat/cpu.h> -#include <plat/serial.h> -#include <plat/common.h> +#include "i2c.h" +#include "serial.h" -#define OMAP_INTC_START NR_IRQS - -#ifdef CONFIG_SOC_OMAP2420 -extern void omap242x_map_common_io(void); -#else -static inline void omap242x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -extern void omap243x_map_common_io(void); -#else -static inline void omap243x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 -extern void omap34xx_map_common_io(void); -#else -static inline void omap34xx_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_TI81XX -extern void omapti81xx_map_common_io(void); -#else -static inline void omapti81xx_map_common_io(void) -{ -} -#endif +#include "usb.h" -#ifdef CONFIG_SOC_AM33XX -extern void omapam33xx_map_common_io(void); -#else -static inline void omapam33xx_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP4 -extern void omap44xx_map_common_io(void); -#else -static inline void omap44xx_map_common_io(void) -{ -} -#endif +#define OMAP_INTC_START NR_IRQS #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2) int omap2_pm_init(void); @@ -122,19 +77,12 @@ static inline int omap_mux_late_init(void) } #endif -#ifdef CONFIG_SOC_OMAP5 -extern void omap5_map_common_io(void); -#else -static inline void omap5_map_common_io(void) -{ -} -#endif - extern void omap2_init_common_infrastructure(void); extern struct sys_timer omap2_timer; extern struct sys_timer omap3_timer; extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap3_gp_timer; extern struct sys_timer omap3_am33xx_timer; extern struct sys_timer omap4_timer; extern struct sys_timer omap5_timer; @@ -162,52 +110,43 @@ void am35xx_init_late(void); void ti81xx_init_late(void); void omap4430_init_late(void); int omap2_common_pm_late_init(void); -void omap_prcm_restart(char, const char *); -/* - * IO bases for various OMAP processors - * Except the tap base, rest all the io bases - * listed are physical addresses. - */ -struct omap_globals { - u32 class; /* OMAP class to detect */ - void __iomem *tap; /* Control module ID code */ - void __iomem *sdrc; /* SDRAM Controller */ - void __iomem *sms; /* SDRAM Memory Scheduler */ - void __iomem *ctrl; /* System Control Module */ - void __iomem *ctrl_pad; /* PAD Control Module */ - void __iomem *prm; /* Power and Reset Management */ - void __iomem *cm; /* Clock Management */ - void __iomem *cm2; - void __iomem *prcm_mpu; -}; - -void omap2_set_globals_242x(void); -void omap2_set_globals_243x(void); -void omap2_set_globals_3xxx(void); -void omap2_set_globals_443x(void); -void omap2_set_globals_5xxx(void); -void omap2_set_globals_ti81xx(void); -void omap2_set_globals_am33xx(void); - -/* These get called from omap2_set_globals_xxxx(), do not call these */ -void omap2_set_globals_tap(struct omap_globals *); -#if defined(CONFIG_SOC_HAS_OMAP2_SDRC) -void omap2_set_globals_sdrc(struct omap_globals *); +#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) +void omap2xxx_restart(char mode, const char *cmd); +#else +static inline void omap2xxx_restart(char mode, const char *cmd) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 +void omap3xxx_restart(char mode, const char *cmd); +#else +static inline void omap3xxx_restart(char mode, const char *cmd) +{ +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +void omap44xx_restart(char mode, const char *cmd); #else -static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals) -{ } +static inline void omap44xx_restart(char mode, const char *cmd) +{ +} #endif -void omap2_set_globals_control(struct omap_globals *); -void omap2_set_globals_prcm(struct omap_globals *); - -void omap242x_map_io(void); -void omap243x_map_io(void); -void omap3_map_io(void); -void am33xx_map_io(void); -void omap4_map_io(void); -void omap5_map_io(void); -void ti81xx_map_io(void); + +/* This gets called from mach-omap2/io.c, do not call this */ +void __init omap2_set_globals_tap(u32 class, void __iomem *tap); + +void __init omap242x_map_io(void); +void __init omap243x_map_io(void); +void __init omap3_map_io(void); +void __init am33xx_map_io(void); +void __init omap4_map_io(void); +void __init omap5_map_io(void); +void __init ti81xx_map_io(void); + +/* omap_barriers_init() is OMAP4 only */ void omap_barriers_init(void); /** @@ -275,6 +214,9 @@ static inline void __iomem *omap4_get_scu_base(void) #endif extern void __init gic_init_irq(void); +extern void gic_dist_disable(void); +extern bool gic_dist_disabled(void); +extern void gic_timer_retrigger(void); extern void omap_smc1(u32 fn, u32 arg); extern void __iomem *omap4_get_sar_ram_base(void); extern void omap_do_wfi(void); @@ -282,6 +224,7 @@ extern void omap_do_wfi(void); #ifdef CONFIG_SMP /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern void omap_secondary_startup_4460(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); extern u32 omap_read_auxcoreboot0(void); @@ -338,6 +281,10 @@ extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); struct omap2_hsmmc_info; extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); +extern void omap_reserve(void); + +struct omap_hwmod; +extern int omap_dss_reset(struct omap_hwmod *); #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index d1ff839..2adb268 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -1,7 +1,7 @@ /* * OMAP2/3 System Control Module register access * - * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007, 2012 Texas Instruments, Inc. * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley @@ -15,15 +15,13 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/sdrc.h> - #include "soc.h" #include "iomap.h" #include "common.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" -#include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" +#include "prm3xxx.h" +#include "cm3xxx.h" #include "sdrc.h" #include "pm.h" #include "control.h" @@ -149,13 +147,11 @@ static struct omap3_control_regs control_context; #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg)) #define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg)) -void __init omap2_set_globals_control(struct omap_globals *omap2_globals) +void __init omap2_set_globals_control(void __iomem *ctrl, + void __iomem *ctrl_pad) { - if (omap2_globals->ctrl) - omap2_ctrl_base = omap2_globals->ctrl; - - if (omap2_globals->ctrl_pad) - omap4_ctrl_pad_base = omap2_globals->ctrl_pad; + omap2_ctrl_base = ctrl; + omap4_ctrl_pad_base = ctrl_pad; } void __iomem *omap_ctrl_base_get(void) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a89e825..4ca8747 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -414,6 +414,8 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); +extern void omap2_set_globals_control(void __iomem *ctrl, + void __iomem *ctrl_pad); #else #define omap_ctrl_base_get() 0 #define omap_ctrl_readb(x) 0 diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index bc27569..bca7a88 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -27,7 +27,6 @@ #include <linux/export.h> #include <linux/cpu_pm.h> -#include <plat/prcm.h> #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c72b5a7..3cff7dc 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -24,10 +24,11 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> +#include <plat-omap/dma-omap.h> + #include "iomap.h" -#include <plat/dma.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "omap4-keypad.h" #include "soc.h" @@ -35,6 +36,7 @@ #include "mux.h" #include "control.h" #include "devices.h" +#include "dma.h" #define L3_MODULES_MAX_LEN 12 #define L3_MODULES 3 @@ -127,7 +129,7 @@ static struct platform_device omap2cam_device = { #if defined(CONFIG_IOMMU_API) -#include <plat/iommu.h> +#include <linux/platform_data/iommu-omap.h> static struct resource omap3isp_resources[] = { { @@ -723,29 +725,3 @@ static int __init omap2_init_devices(void) return 0; } arch_initcall(omap2_init_devices); - -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -static int __init omap_init_wdt(void) -{ - int id = -1; - struct platform_device *pdev; - struct omap_hwmod *oh; - char *oh_name = "wd_timer2"; - char *dev_name = "omap_wdt"; - - if (!cpu_class_is_omap2() || of_have_populated_dt()) - return 0; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up wd_timer%d hwmod\n", id); - return -EINVAL; - } - - pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0); - WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", - dev_name, oh->name); - return 0; -} -subsys_initcall(omap_init_wdt); -#endif diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 1011995..38ba58c 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -25,15 +25,17 @@ #include <linux/delay.h> #include <video/omapdss.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" #include "common.h" +#include "soc.h" #include "iomap.h" #include "mux.h" #include "control.h" #include "display.h" +#include "prm.h" #define DISPC_CONTROL 0x0040 #define DISPC_CONTROL2 0x0238 @@ -284,6 +286,35 @@ err: return ERR_PTR(r); } +static enum omapdss_version __init omap_display_get_version(void) +{ + if (cpu_is_omap24xx()) + return OMAPDSS_VER_OMAP24xx; + else if (cpu_is_omap3630()) + return OMAPDSS_VER_OMAP3630; + else if (cpu_is_omap34xx()) { + if (soc_is_am35xx()) { + return OMAPDSS_VER_AM35xx; + } else { + if (omap_rev() < OMAP3430_REV_ES3_0) + return OMAPDSS_VER_OMAP34xx_ES1; + else + return OMAPDSS_VER_OMAP34xx_ES3; + } + } else if (omap_rev() == OMAP4430_REV_ES1_0) + return OMAPDSS_VER_OMAP4430_ES1; + else if (omap_rev() == OMAP4430_REV_ES2_0 || + omap_rev() == OMAP4430_REV_ES2_1 || + omap_rev() == OMAP4430_REV_ES2_2) + return OMAPDSS_VER_OMAP4430_ES2; + else if (cpu_is_omap44xx()) + return OMAPDSS_VER_OMAP4; + else if (soc_is_omap54xx()) + return OMAPDSS_VER_OMAP5; + else + return OMAPDSS_VER_UNKNOWN; +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; @@ -291,9 +322,18 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) int i, oh_count; const struct omap_dss_hwmod_data *curr_dss_hwmod; struct platform_device *dss_pdev; + enum omapdss_version ver; /* create omapdss device */ + ver = omap_display_get_version(); + + if (ver == OMAPDSS_VER_UNKNOWN) { + pr_err("DSS not supported on this SoC\n"); + return -ENODEV; + } + + board_data->version = ver; board_data->dsi_enable_pads = omap_dsi_enable_pads; board_data->dsi_disable_pads = omap_dsi_disable_pads; board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count; @@ -473,7 +513,6 @@ static void dispc_disable_outputs(void) } } -#define MAX_MODULE_SOFTRESET_WAIT 10000 int omap_dss_reset(struct omap_hwmod *oh) { struct omap_hwmod_opt_clk *oc; diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index ff75abe..e5aba58 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,9 +28,11 @@ #include <linux/init.h> #include <linux/device.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> + +#include "soc.h" +#include "omap_hwmod.h" +#include "omap_device.h" #define OMAP2_DMA_STRIDE 0x60 @@ -274,6 +276,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return -ENOMEM; } + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + d->dev_caps |= HS_CHANNELS_RESERVED; + /* Check the capabilities register for descriptor loading feature */ if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS) dma_common_ch_end = CCDN; diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h new file mode 100644 index 0000000..eba80db --- /dev/null +++ b/arch/arm/mach-omap2/dma.h @@ -0,0 +1,131 @@ +/* + * OMAP2PLUS DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP2PLUS_DMA_CHANNEL_H +#define __OMAP2PLUS_DMA_CHANNEL_H + + +/* DMA channels for 24xx */ +#define OMAP24XX_DMA_NO_DEVICE 0 +#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ +#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ +#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ +#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ +#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ +#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ +#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ +#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ +#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ +#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ +#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ +#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ +#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ +#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ +#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ +#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ +#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ +#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ +#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ +#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ +#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ +#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ +#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ +#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ +#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ +#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ +#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ +#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ +#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ +#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ +#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ +#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ +#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ +#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ +#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ +#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ +#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ +#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ +#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ +#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ +#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ +#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ +#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ +#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ +#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ +#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ +#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ +#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ +#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ +#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ +#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ +#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ +#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ +#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ +#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ +#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ +#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ + +#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ +#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + +#endif /* __OMAP2PLUS_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 814e180..eacf51f 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -28,8 +28,6 @@ #include <linux/bitops.h> #include <linux/clkdev.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "cm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 09d0ccc..5854da1 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -15,8 +15,6 @@ #include <linux/io.h> #include <linux/bitops.h> -#include <plat/clock.h> - #include "soc.h" #include "clock.h" #include "clock44xx.h" diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 72e0f01b..fce5aa3 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -23,15 +23,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/platform_data/omap_drm.h> -#include <plat/omap_device.h> -#include <plat/omap_hwmod.h> +#include "omap_device.h" +#include "omap_hwmod.h" +#include <plat/cpu.h> #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE) +static struct omap_drm_platform_data platform_data; + static struct platform_device omap_drm_device = { .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &platform_data, }, .name = "omapdrm", .id = 0, @@ -52,6 +57,8 @@ static int __init omap_init_drm(void) oh->name); } + platform_data.omaprev = GET_OMAP_REVISION(); + return platform_device_register(&omap_drm_device); } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 9838810..b155500 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -27,7 +27,7 @@ #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS -#include <plat/omap-pm.h> +#include "omap-pm.h" #endif #include <linux/platform_data/dsp-omap.h> diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index d1058f1..399acab 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -23,9 +23,9 @@ #include <linux/of.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4acf497..8607735 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -17,9 +17,12 @@ #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-nand.h" + +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 static struct resource gpmc_nand_resource[] = { { @@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) +static int omap2_nand_gpmc_retime( + struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { struct gpmc_timings t; int err; - if (!gpmc_nand_data->gpmc_t) - return 0; - memset(&t, 0, sizeof(t)); - t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk; - t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); - t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on); + t.sync_clk = gpmc_t->sync_clk; + t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on); + t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on); /* Read */ - t.adv_rd_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_rd_off); + t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off); t.oe_on = t.adv_on; - t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access); - t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off); - t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off); - t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle); + t.access = gpmc_round_ns_to_ticks(gpmc_t->access); + t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off); + t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off); + t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle); /* Write */ - t.adv_wr_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_wr_off); + t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off); t.we_on = t.oe_on; if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_data_mux_bus); - t.wr_access = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_access); + t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus); + t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access); } - t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off); - t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off); - t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle); + t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off); + t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off); + t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle); /* Configure GPMC */ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) @@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data return 0; } -int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) +static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) +{ + /* support only OMAP3 class */ + if (!cpu_is_omap34xx()) { + pr_err("BCH ecc is not supported on this CPU\n"); + return 0; + } + + /* + * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. + * Other chips may be added if confirmed to work. + */ + if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && + (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { + pr_err("BCH 4-bit mode is not supported on this CPU\n"); + return 0; + } + + return 1; +} + +int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { int err = 0; struct device *dev = &gpmc_nand_device.dev; @@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); gpmc_nand_resource[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); - /* Set timings in GPMC */ - err = omap2_nand_gpmc_retime(gpmc_nand_data); - if (err < 0) { - dev_err(dev, "Unable to set gpmc timings: %d\n", err); - return err; + + if (gpmc_t) { + err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); + if (err < 0) { + dev_err(dev, "Unable to set gpmc timings: %d\n", err); + return err; + } } /* Enable RD PIN Monitoring Reg */ @@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); + if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) + return -EINVAL; + err = platform_device_register(&gpmc_nand_device); if (err < 0) { dev_err(dev, "Unable to register NAND device\n"); diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h new file mode 100644 index 0000000..d59e128 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-nand.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-omap2/gpmc-nand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_NAND_H +#define __OMAP2_GPMC_NAND_H + +#include "gpmc.h" +#include <linux/platform_data/mtd-nand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) +extern int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 916716e..d102183 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -16,15 +16,25 @@ #include <linux/mtd/onenand_regs.h> #include <linux/io.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/err.h> #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-onenand.h" #define ONENAND_IO_SIZE SZ_128K +#define ONENAND_FLAG_SYNCREAD (1 << 0) +#define ONENAND_FLAG_SYNCWRITE (1 << 1) +#define ONENAND_FLAG_HF (1 << 2) +#define ONENAND_FLAG_VHF (1 << 3) + +static unsigned onenand_flags; +static unsigned latency; +static int fclk_offset; + static struct omap_onenand_platform_data *gpmc_onenand_data; static struct resource gpmc_onenand_resource = { @@ -38,11 +48,9 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) +static struct gpmc_timings omap2_onenand_calc_async_timings(void) { struct gpmc_timings t; - u32 reg; - int err; const int t_cer = 15; const int t_avdp = 12; @@ -55,11 +63,6 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; - /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -86,25 +89,30 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + return t; +} + +static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) +{ /* Configure GPMC for asynchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static void omap2_onenand_set_async_mode(void __iomem *onenand_base) +{ + u32 reg; /* Ensure sync read and sync write are disabled */ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - - return 0; } -static void set_onenand_cfg(void __iomem *onenand_base, int latency, - int sync_read, int sync_write, int hf, int vhf) +static void set_onenand_cfg(void __iomem *onenand_base) { u32 reg; @@ -112,19 +120,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; - if (sync_read) + if (onenand_flags & ONENAND_FLAG_SYNCREAD) reg |= ONENAND_SYS_CFG1_SYNC_READ; else reg &= ~ONENAND_SYS_CFG1_SYNC_READ; - if (sync_write) + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) reg |= ONENAND_SYS_CFG1_SYNC_WRITE; else reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; - if (hf) + if (onenand_flags & ONENAND_FLAG_HF) reg |= ONENAND_SYS_CFG1_HF; else reg &= ~ONENAND_SYS_CFG1_HF; - if (vhf) + if (onenand_flags & ONENAND_FLAG_VHF) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; @@ -132,21 +140,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, } static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, bool *clk_dep) + void __iomem *onenand_base) { u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); - int freq = 0; - - if (cfg->get_freq) { - struct onenand_freq_info fi; - - fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID); - fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID); - fi.ver_id = ver; - freq = cfg->get_freq(&fi, clk_dep); - if (freq) - return freq; - } + int freq; switch ((ver >> 4) & 0xf) { case 0: @@ -172,9 +169,9 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, - int *freq_ptr) +static struct gpmc_timings +omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, + int freq) { struct gpmc_timings t; const int t_cer = 15; @@ -184,29 +181,15 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, const int t_wpl = 40; const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; - int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; - int err, ticks_cez; - int cs = cfg->cs, freq = *freq_ptr; u32 reg; - bool clk_dep = false; + int div, fclk_offset_ns, gpmc_clk_ns; + int ticks_cez; + int cs = cfg->cs; - if (cfg->flags & ONENAND_SYNC_READ) { - sync_read = 1; - } else if (cfg->flags & ONENAND_SYNC_READWRITE) { - sync_read = 1; - sync_write = 1; - } else - return omap2_onenand_set_async_mode(cs, onenand_base); - - if (!freq) { - /* Very first call freq is not known */ - err = omap2_onenand_set_async_mode(cs, onenand_base); - if (err) - return err; - freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep); - first_time = 1; - } + if (cfg->flags & ONENAND_SYNC_READ) + onenand_flags = ONENAND_FLAG_SYNCREAD; + else if (cfg->flags & ONENAND_SYNC_READWRITE) + onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { case 104: @@ -244,44 +227,31 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, t_ach = 9; t_aavdh = 7; t_rdyo = 15; - sync_write = 0; + onenand_flags &= ~ONENAND_FLAG_SYNCWRITE; break; } - div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); + div = gpmc_calc_divider(min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ - hf = 1; + onenand_flags |= ONENAND_FLAG_HF; + else + onenand_flags &= ~ONENAND_FLAG_HF; if (gpmc_clk_ns < 12) /* >83Mhz */ - vhf = 1; - if (vhf) + onenand_flags |= ONENAND_FLAG_VHF; + else + onenand_flags &= ~ONENAND_FLAG_VHF; + if (onenand_flags & ONENAND_FLAG_VHF) latency = 8; - else if (hf) + else if (onenand_flags & ONENAND_FLAG_HF) latency = 6; else if (gpmc_clk_ns >= 25) /* 40 MHz*/ latency = 3; else latency = 4; - if (clk_dep) { - if (gpmc_clk_ns < 12) { /* >83Mhz */ - t_ces = 3; - t_avds = 4; - } else if (gpmc_clk_ns < 15) { /* >66Mhz */ - t_ces = 5; - t_avds = 4; - } else if (gpmc_clk_ns < 25) { /* >40Mhz */ - t_ces = 6; - t_avds = 5; - } else { - t_ces = 7; - t_avds = 7; - } - } - - if (first_time) - set_onenand_cfg(onenand_base, latency, - sync_read, sync_write, hf, vhf); + /* Set synchronous read timings */ + memset(&t, 0, sizeof(t)); if (div == 1) { reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); @@ -307,8 +277,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); } - /* Set synchronous read timings */ - memset(&t, 0, sizeof(t)); t.sync_clk = min_gpmc_clk_period; t.cs_on = 0; t.adv_on = 0; @@ -330,7 +298,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, ticks_cez); /* Write */ - if (sync_write) { + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { t.adv_wr_off = t.adv_rd_off; t.we_on = 0; t.we_off = t.cs_rd_off; @@ -355,6 +323,14 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } } + return t; +} + +static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) +{ + unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; + unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; + /* Configure GPMC for synchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_WRAPBURST_SUPP | @@ -371,11 +347,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, GPMC_CONFIG1_DEVICETYPE_NOR | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static int omap2_onenand_setup_async(void __iomem *onenand_base) +{ + struct gpmc_timings t; + int ret; + + omap2_onenand_set_async_mode(onenand_base); - set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); + t = omap2_onenand_calc_async_timings(); + + ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + omap2_onenand_set_async_mode(onenand_base); + + return 0; +} + +static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) +{ + int ret, freq = *freq_ptr; + struct gpmc_timings t; + + if (!freq) { + /* Very first call freq is not known */ + freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); + set_onenand_cfg(onenand_base); + } + + t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + + ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + set_onenand_cfg(onenand_base); *freq_ptr = freq; @@ -385,15 +395,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) { struct device *dev = &gpmc_onenand_device.dev; + unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE; + int ret; - /* Set sync timings in GPMC */ - if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, - freq_ptr) < 0) { - dev_err(dev, "Unable to set synchronous mode\n"); - return -EINVAL; + ret = omap2_onenand_setup_async(onenand_base); + if (ret) { + dev_err(dev, "unable to set to async mode\n"); + return ret; } - return 0; + if (!(gpmc_onenand_data->flags & l)) + return 0; + + ret = omap2_onenand_setup_sync(onenand_base, freq_ptr); + if (ret) + dev_err(dev, "unable to set to sync mode\n"); + return ret; } void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) @@ -411,6 +428,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } + if (cpu_is_omap34xx()) + gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX; + else + gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX; + err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h new file mode 100644 index 0000000..216f23a --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-omap2/gpmc-onenand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_ONENAND_H +#define __OMAP2_GPMC_ONENAND_H + +#include <linux/platform_data/mtd-onenand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); +#else +#define board_onenand_data NULL +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 5654753..6eed907 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include "soc.h" diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 249a0b4..ef99011 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/smsc911x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" static struct resource gpmc_smsc911x_resources[] = { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 92b5718..bf6117c 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,16 +26,14 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/mach-types.h> -#include <plat/gpmc.h> +#include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/cpu.h> -#include <plat/gpmc.h> -#include <plat/sdrc.h> -#include <plat/omap_device.h> +#include <asm/mach-types.h> #include "soc.h" #include "common.h" +#include "omap_device.h" +#include "gpmc.h" #define DEVICE_NAME "omap-gpmc" @@ -59,6 +57,9 @@ #define GPMC_ECC_SIZE_CONFIG 0x1fc #define GPMC_ECC1_RESULT 0x200 #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -75,6 +76,7 @@ #define GPMC_CS0_OFFSET 0x60 #define GPMC_CS_SIZE 0x30 +#define GPMC_BCH_SIZE 0x10 #define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF @@ -137,7 +139,6 @@ static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ -static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -158,22 +159,6 @@ static u32 gpmc_read_reg(int idx) return __raw_readl(gpmc_base + idx); } -static void gpmc_cs_write_byte(int cs, int idx, u8 val) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - __raw_writeb(val, reg_addr); -} - -static u8 gpmc_cs_read_byte(int cs, int idx) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return __raw_readb(reg_addr); -} - void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; @@ -288,7 +273,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, return -1 #endif -int gpmc_cs_calc_divider(int cs, unsigned int sync_clk) +int gpmc_calc_divider(unsigned int sync_clk) { int div; u32 l; @@ -308,7 +293,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) int div; u32 l; - div = gpmc_cs_calc_divider(cs, t->sync_clk); + div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; @@ -509,44 +494,6 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_read_status - read access request to get the different gpmc status - * @cmd: command type - * @return status - */ -int gpmc_read_status(int cmd) -{ - int status = -EINVAL; - u32 regval = 0; - - switch (cmd) { - case GPMC_GET_IRQ_STATUS: - status = gpmc_read_reg(GPMC_IRQSTATUS); - break; - - case GPMC_PREFETCH_FIFO_CNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval); - break; - - case GPMC_PREFETCH_COUNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_COUNT(regval); - break; - - case GPMC_STATUS_BUFFER: - regval = gpmc_read_reg(GPMC_STATUS); - /* 1 : buffer is available to write */ - status = regval & GPMC_STATUS_BUFF_EMPTY; - break; - - default: - printk(KERN_ERR "gpmc_read_status: Not supported\n"); - } - return status; -} -EXPORT_SYMBOL(gpmc_read_status); - -/** * gpmc_cs_configure - write request to configure gpmc * @cs: chip select number * @cmd: command type @@ -614,121 +561,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval) } EXPORT_SYMBOL(gpmc_cs_configure); -/** - * gpmc_nand_read - nand specific read access request - * @cs: chip select number - * @cmd: command type - */ -int gpmc_nand_read(int cs, int cmd) -{ - int rval = -EINVAL; - - switch (cmd) { - case GPMC_NAND_DATA: - rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA); - break; - - default: - printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n"); - } - return rval; -} -EXPORT_SYMBOL(gpmc_nand_read); - -/** - * gpmc_nand_write - nand specific write request - * @cs: chip select number - * @cmd: command type - * @wval: value to write - */ -int gpmc_nand_write(int cs, int cmd, int wval) -{ - int err = 0; - - switch (cmd) { - case GPMC_NAND_COMMAND: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval); - break; - - case GPMC_NAND_ADDRESS: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval); - break; - - case GPMC_NAND_DATA: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval); - - default: - printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n"); - err = -EINVAL; - } - return err; -} -EXPORT_SYMBOL(gpmc_nand_write); - - - -/** - * gpmc_prefetch_enable - configures and starts prefetch transfer - * @cs: cs (chip select) number - * @fifo_th: fifo threshold to be used for read/ write - * @dma_mode: dma mode enable (1) or disable (0) - * @u32_count: number of bytes to be transferred - * @is_write: prefetch read(0) or write post(1) mode - */ -int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write) -{ - - if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) { - pr_err("gpmc: fifo threshold is not supported\n"); - return -1; - } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { - /* Set the amount of bytes to be prefetched */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count); - - /* Set dma/mpu mode, the prefetch read / post write and - * enable the engine. Set which cs is has requested for. - */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | - PREFETCH_FIFOTHRESHOLD(fifo_th) | - ENABLE_PREFETCH | - (dma_mode << DMA_MPU_MODE) | - (0x1 & is_write))); - - /* Start the prefetch engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); - } else { - return -EBUSY; - } - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_enable); - -/** - * gpmc_prefetch_reset - disables and stops the prefetch engine - */ -int gpmc_prefetch_reset(int cs) -{ - u32 config1; - - /* check if the same module/cs is trying to reset */ - config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); - if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs) - return -EINVAL; - - /* Stop the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0); - - /* Reset/disable the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0); - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_reset); - void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { + int i; + reg->gpmc_status = gpmc_base + GPMC_STATUS; reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; @@ -744,7 +580,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; - reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; + + for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) { + reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + + GPMC_BCH_SIZE * i; + } } int gpmc_get_client_irq(unsigned irq_config) @@ -1093,267 +939,3 @@ void omap3_gpmc_restore_context(void) } } #endif /* CONFIG_ARCH_OMAP3 */ - -/** - * gpmc_enable_hwecc - enable hardware ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @ecc_size: bytes for which ECC will be generated - */ -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) -{ - unsigned int val; - - /* check if ecc module is in used */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - - /* program ecc and result sizes */ - val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F)); - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val); - - switch (mode) { - case GPMC_ECC_READ: - case GPMC_ECC_WRITE: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - break; - case GPMC_ECC_READSYN: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCDISABLE); - break; - default: - printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode); - break; - } - - /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ - val = (dev_width << 7) | (cs << 1) | (0x1); - gpmc_write_reg(GPMC_ECC_CONFIG, val); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); - -/** - * gpmc_calculate_ecc - generate non-inverted ecc bytes - * @cs: chip select number - * @dat: data pointer over which ecc is computed - * @ecc_code: ecc code buffer - * - * Using non-inverted ECC is considered ugly since writing a blank - * page (padding) will clear the ECC bytes. This is not a problem as long - * no one is trying to write data on the seemingly unused page. Reading - * an erased page will produce an ECC mismatch between generated and read - * ECC bytes that has to be dealt with separately. - */ -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) -{ - unsigned int val = 0x0; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - /* read ecc result */ - val = gpmc_read_reg(GPMC_ECC1_RESULT); - *ecc_code++ = val; /* P128e, ..., P1e */ - *ecc_code++ = val >> 16; /* P128o, ..., P1o */ - /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ - *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); - -#ifdef CONFIG_ARCH_OMAP3 - -/** - * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality - * @cs: chip select number - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - * - * This function must be executed before any call to gpmc_enable_hwecc_bch. - */ -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors) -{ - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - /* support only OMAP3 class */ - if (!cpu_is_omap34xx()) { - printk(KERN_ERR "BCH ecc is not supported on this CPU\n"); - return -EINVAL; - } - - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. - * Other chips may be added if confirmed to work. - */ - if ((nerrors == 4) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { - printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n"); - return -EINVAL; - } - - /* sanity check */ - if (nsectors > 8) { - printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n", - nsectors); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch); - -/** - * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - */ -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors) -{ - unsigned int val; - - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, 0x1); - - /* - * When using BCH, sector size is hardcoded to 512 bytes. - * Here we are using wrapping mode 6 both for reading and writing, with: - * size0 = 0 (no additional protected byte in spare area) - * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) - */ - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12)); - - /* BCH configuration */ - val = ((1 << 16) | /* enable BCH */ - (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ - (0x06 << 8) | /* wrap mode = 6 */ - (dev_width << 7) | /* bus width */ - (((nsectors-1) & 0x7) << 4) | /* number of sectors */ - (cs << 1) | /* ECC CS */ - (0x1)); /* enable ECC */ - - gpmc_write_reg(GPMC_ECC_CONFIG, val); - gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch); - -/** - * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs; and - * left-justify the resulting polynomial. - */ - *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF); - *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF); - *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); - *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF); - *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF); - *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF); - *ecc++ = 0x7f ^ ((val1 & 0xF) << 4); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4); - -/** - * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2, val3, val4; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - val3 = gpmc_read_reg(reg + 8); - val4 = gpmc_read_reg(reg + 12); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs. - */ - *ecc++ = 0xef ^ (val4 & 0xFF); - *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); - *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); - *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); - *ecc++ = 0xed ^ (val3 & 0xFF); - *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); - *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); - *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); - *ecc++ = 0x97 ^ (val2 & 0xFF); - *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); - *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); - *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); - *ecc++ = 0xb5 ^ (val1 & 0xFF); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8); - -#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/mach-omap2/gpmc.h index 2e6e259..79f4dfc 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -11,6 +11,8 @@ #ifndef __OMAP2_GPMC_H #define __OMAP2_GPMC_H +#include <linux/platform_data/mtd-nand-omap2.h> + /* Maximum Number of Chip Selects */ #define GPMC_CS_NUM 8 @@ -32,15 +34,6 @@ #define GPMC_SET_IRQ_STATUS 0x00000004 #define GPMC_CONFIG_WP 0x00000005 -#define GPMC_GET_IRQ_STATUS 0x00000006 -#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */ -#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/ -#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */ - -#define GPMC_NAND_COMMAND 0x0000000a -#define GPMC_NAND_ADDRESS 0x0000000b -#define GPMC_NAND_DATA 0x0000000c - #define GPMC_ENABLE_IRQ 0x0000000d /* ECC commands */ @@ -76,25 +69,10 @@ #define GPMC_DEVICETYPE_NOR 0 #define GPMC_DEVICETYPE_NAND 2 #define GPMC_CONFIG_WRITEPROTECT 0x00000010 -#define GPMC_STATUS_BUFF_EMPTY 0x00000001 #define WR_RD_PIN_MONITORING 0x00600000 -#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) -#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 -#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 -#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) - -enum omap_ecc { - /* 1-bit ecc: stored at end of spare area */ - OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ - OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at beginning of spare area as romcode */ - OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ - OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ - OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ -}; /* * Note that all values in this struct are in nanoseconds except sync_clk @@ -133,22 +111,6 @@ struct gpmc_timings { u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; -struct gpmc_nand_regs { - void __iomem *gpmc_status; - void __iomem *gpmc_nand_command; - void __iomem *gpmc_nand_address; - void __iomem *gpmc_nand_data; - void __iomem *gpmc_prefetch_config1; - void __iomem *gpmc_prefetch_config2; - void __iomem *gpmc_prefetch_control; - void __iomem *gpmc_prefetch_status; - void __iomem *gpmc_ecc_config; - void __iomem *gpmc_ecc_control; - void __iomem *gpmc_ecc_size_config; - void __iomem *gpmc_ecc1_result; - void __iomem *gpmc_bch_result0; -}; - extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); @@ -160,31 +122,14 @@ extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); +extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); -extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write); -extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_read_status(int cmd); extern int gpmc_cs_configure(int cs, int cmd, int wval); -extern int gpmc_nand_read(int cs, int cmd); -extern int gpmc_nand_write(int cs, int cmd, int wval); - -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); - -#ifdef CONFIG_ARCH_OMAP3 -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors); -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors); -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc); -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc); -#endif /* CONFIG_ARCH_OMAP3 */ #endif diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index e003f2b..ab7bf18 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -27,15 +27,13 @@ #include <linux/err.h> #include <linux/platform_device.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "hdq1w.h" +#include "prm.h" #include "common.h" -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /** * omap_hdq1w_reset - reset the OMAP HDQ1W module * @oh: struct omap_hwmod * diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h index 0c1efc8..c7e08d2 100644 --- a/arch/arm/mach-omap2/hdq1w.h +++ b/arch/arm/mach-omap2/hdq1w.h @@ -21,7 +21,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H #define ARCH_ARM_MACH_OMAP2_HDQ1W_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" /* * XXX A future cleanup patch should modify diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 4d3a632..4a96433 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,14 +14,14 @@ #include <linux/string.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/mmc.h> -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "soc.h" +#include "omap_device.h" +#include "omap-pm.h" #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 8763c85..1df9b5f 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -21,8 +21,8 @@ #include <linux/err.h> #include <linux/hwspinlock.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { .base_id = 0, diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index fc57e67..fbb9b15 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -19,21 +19,23 @@ * */ -#include <plat/i2c.h> -#include "common.h" -#include <plat/omap_hwmod.h> +#include "soc.h" +#include "omap_hwmod.h" +#include "omap_device.h" +#include "prm.h" +#include "common.h" #include "mux.h" +#include "i2c.h" /* In register I2C_CON, Bit 15 is the I2C enable bit */ #define I2C_EN BIT(15) #define OMAP2_I2C_CON_OFFSET 0x24 #define OMAP4_I2C_CON_OFFSET 0xA4 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 +#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 -void __init omap2_i2c_mux_pins(int bus_id) +static void __init omap2_i2c_mux_pins(int bus_id) { char mux_name[sizeof("i2c2_scl.i2c2_scl")]; @@ -104,3 +106,62 @@ int omap_i2c_reset(struct omap_hwmod *oh) return 0; } + +static int __init omap_i2c_nr_ports(void) +{ + int ports = 0; + + if (cpu_is_omap24xx()) + ports = 2; + else if (cpu_is_omap34xx()) + ports = 3; + else if (cpu_is_omap44xx()) + ports = 4; + return ports; +} + +static const char name[] = "omap_i2c"; + +int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id) +{ + int l; + struct omap_hwmod *oh; + struct platform_device *pdev; + char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; + struct omap_i2c_bus_platform_data *pdata; + struct omap_i2c_dev_attr *dev_attr; + + if (bus_id > omap_i2c_nr_ports()) + return -EINVAL; + + omap2_i2c_mux_pins(bus_id); + + l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); + WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, + "String buffer overflow in I2C%d device setup\n", bus_id); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return -EEXIST; + } + + pdata = i2c_pdata; + /* + * pass the hwmod class's CPU-specific knowledge of I2C IP revision in + * use, and functionality implementation flags, up to the OMAP I2C + * driver via platform data + */ + pdata->rev = oh->class->rev; + + dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; + pdata->flags = dev_attr->flags; + + pdev = omap_device_build(name, bus_id, oh, pdata, + sizeof(struct omap_i2c_bus_platform_data), + NULL, 0, 0); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); + + return PTR_RET(pdev); +} + diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h new file mode 100644 index 0000000..42b6f2e --- /dev/null +++ b/arch/arm/mach-omap2/i2c.h @@ -0,0 +1,42 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/i2c.h> + +#ifndef __MACH_OMAP2_I2C_H +#define __MACH_OMAP2_I2C_H + +/** + * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod + * @fifo_depth: total controller FIFO size (in bytes) + * @flags: differences in hardware support capability + * + * @fifo_depth represents what exists on the hardware, not what is + * actually configured at runtime by the device driver. + */ +struct omap_i2c_dev_attr { + u8 fifo_depth; + u32 flags; +}; + +int omap_i2c_reset(struct omap_hwmod *oh); + +#endif /* __MACH_OMAP2_I2C_H */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index cf2362c..45cc7ed4 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -28,6 +28,9 @@ #include "soc.h" #include "control.h" +#define OMAP4_SILICON_TYPE_STANDARD 0x01 +#define OMAP4_SILICON_TYPE_PERFORMANCE 0x02 + static unsigned int omap_revision; static const char *cpu_rev; u32 omap_features; @@ -273,25 +276,11 @@ void __init omap4xxx_check_features(void) { u32 si_type; - if (cpu_is_omap443x()) - omap_features |= OMAP4_HAS_MPU_1GHZ; - + si_type = + (read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03; - if (cpu_is_omap446x()) { - si_type = - read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1); - switch ((si_type & (3 << 16)) >> 16) { - case 2: - /* High performance device */ - omap_features |= OMAP4_HAS_MPU_1_5GHZ; - break; - case 1: - default: - /* Standard device */ - omap_features |= OMAP4_HAS_MPU_1_2GHZ; - break; - } - } + if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE) + omap_features = OMAP4_HAS_PERF_SILICON; } void __init ti81xx_check_features(void) @@ -559,11 +548,12 @@ void __init omap5xxx_check_revision(void) * detect the exact revision later on in omap2_detect_revision() once map_io * is done. */ -void __init omap2_set_globals_tap(struct omap_globals *omap2_globals) +void __init omap2_set_globals_tap(u32 class, void __iomem *tap) { - omap_revision = omap2_globals->class; - tap_base = omap2_globals->tap; + omap_revision = class; + tap_base = tap; + /* XXX What is this intended to do? */ if (cpu_is_omap34xx()) tap_prod_id = 0x0210; else diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 93d10de..cfaed13 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <plat/serial.h> +#include <mach/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h deleted file mode 100644 index 5621cc5..0000000 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/gpio.h - */ diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/mach-omap2/include/mach/serial.h index 65fce44..70eda00 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/mach-omap2/include/mach/serial.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/serial.h - * * Copyright (C) 2009 Texas Instruments * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> * @@ -10,11 +8,6 @@ * GNU General Public License for more details. */ -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include <linux/init.h> - /* * Memory entry used for the DEBUG_LL UART configuration, relative to * start of RAM. See also uncompress.h and debug-macro.S. @@ -29,11 +22,6 @@ */ #define OMAP_UART_INFO_OFS 0x3ffc -/* OMAP1 serial ports */ -#define OMAP1_UART1_BASE 0xfffb0000 -#define OMAP1_UART2_BASE 0xfffb0800 -#define OMAP1_UART3_BASE 0xfffb9800 - /* OMAP2 serial ports */ #define OMAP2_UART1_BASE 0x4806a000 #define OMAP2_UART2_BASE 0x4806c000 @@ -76,20 +64,14 @@ #define ZOOM_UART_VIRT 0xfa400000 #define OMAP_PORT_SHIFT 2 -#define OMAP7XX_PORT_SHIFT 0 #define ZOOM_PORT_SHIFT 1 -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) #define OMAP24XX_BASE_BAUD (48000000/16) /* * DEBUG_LL port encoding stored into the UART1 scratchpad register by * decomp_setup in uncompress.h */ -#define OMAP1UART1 11 -#define OMAP1UART2 12 -#define OMAP1UART3 13 #define OMAP2UART1 21 #define OMAP2UART2 22 #define OMAP2UART3 23 @@ -109,15 +91,6 @@ #define OMAP5UART4 OMAP4UART4 #define ZOOM_UART 95 /* Only on zoom2/3 */ -/* This is only used by 8250.c for omap1510 */ -#define is_omap_port(pt) ({int __ret = 0; \ - if ((pt)->port.mapbase == OMAP1_UART1_BASE || \ - (pt)->port.mapbase == OMAP1_UART2_BASE || \ - (pt)->port.mapbase == OMAP1_UART3_BASE) \ - __ret = 1; \ - __ret; \ - }) - #ifndef __ASSEMBLER__ struct omap_board_data; @@ -128,5 +101,3 @@ extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); extern void omap_serial_init_port(struct omap_board_data *bdata, struct omap_uart_port_info *platform_data); #endif - -#endif diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h index 78e0557..8e3546d 100644 --- a/arch/arm/mach-omap2/include/mach/uncompress.h +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -1,5 +1,176 @@ /* - * arch/arm/mach-omap2/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include <plat/uncompress.h> +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/memory.h> +#include <asm/mach-types.h> + +#include <mach/serial.h> + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP2(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP2UART##p) + +#define DEBUG_LL_OMAP3(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP3UART##p) + +#define DEBUG_LL_OMAP4(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP4UART##p) + +#define DEBUG_LL_OMAP5(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP5UART##p) +/* Zoom2/3 shift is different for UART1 and external port */ +#define DEBUG_LL_ZOOM(mach) \ + _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) + +#define DEBUG_LL_TI81XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + TI81XXUART##p) + +#define DEBUG_LL_AM33XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + AM33XXUART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap2 based boards using UART1 */ + DEBUG_LL_OMAP2(1, omap_2430sdp); + DEBUG_LL_OMAP2(1, omap_apollon); + DEBUG_LL_OMAP2(1, omap_h4); + + /* omap2 based boards using UART3 */ + DEBUG_LL_OMAP2(3, nokia_n800); + DEBUG_LL_OMAP2(3, nokia_n810); + DEBUG_LL_OMAP2(3, nokia_n810_wimax); + + /* omap3 based boards using UART1 */ + DEBUG_LL_OMAP2(1, omap3evm); + DEBUG_LL_OMAP3(1, omap_3430sdp); + DEBUG_LL_OMAP3(1, omap_3630sdp); + DEBUG_LL_OMAP3(1, omap3530_lv_som); + DEBUG_LL_OMAP3(1, omap3_torpedo); + + /* omap3 based boards using UART3 */ + DEBUG_LL_OMAP3(3, cm_t35); + DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, cm_t3730); + DEBUG_LL_OMAP3(3, craneboard); + DEBUG_LL_OMAP3(3, devkit8000); + DEBUG_LL_OMAP3(3, igep0020); + DEBUG_LL_OMAP3(3, igep0030); + DEBUG_LL_OMAP3(3, nokia_rm680); + DEBUG_LL_OMAP3(3, nokia_rm696); + DEBUG_LL_OMAP3(3, nokia_rx51); + DEBUG_LL_OMAP3(3, omap3517evm); + DEBUG_LL_OMAP3(3, omap3_beagle); + DEBUG_LL_OMAP3(3, omap3_pandora); + DEBUG_LL_OMAP3(3, omap_ldp); + DEBUG_LL_OMAP3(3, overo); + DEBUG_LL_OMAP3(3, touchbook); + + /* omap4 based boards using UART3 */ + DEBUG_LL_OMAP4(3, omap_4430sdp); + DEBUG_LL_OMAP4(3, omap4_panda); + + /* omap5 based boards using UART3 */ + DEBUG_LL_OMAP5(3, omap5_sevm); + + /* zoom2/3 external uart */ + DEBUG_LL_ZOOM(omap_zoom2); + DEBUG_LL_ZOOM(omap_zoom3); + + /* TI8168 base boards using UART3 */ + DEBUG_LL_TI81XX(3, ti8168evm); + + /* TI8148 base boards using UART1 */ + DEBUG_LL_TI81XX(1, ti8148evm); + + /* AM33XX base boards using UART1 */ + DEBUG_LL_AM33XX(1, am335xevm); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4234d28..9df7576 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -25,14 +25,9 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <plat/sram.h> -#include <plat/sdrc.h> -#include <plat/serial.h> -#include <plat/omap-pm.h> -#include <plat/omap_hwmod.h> -#include <plat/multi.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "omap_hwmod.h" #include "soc.h" #include "iomap.h" #include "voltage.h" @@ -43,6 +38,18 @@ #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" +#include "omap-pm.h" +#include "sdrc.h" +#include "control.h" +#include "serial.h" +#include "sram.h" +#include "cm2xxx.h" +#include "cm3xxx.h" +#include "prm.h" +#include "cm.h" +#include "prcm_mpu44xx.h" +#include "prminst44xx.h" +#include "cminst44xx.h" /* * The machine specific code may provide the extra mapping besides the @@ -265,7 +272,7 @@ static struct map_desc omap54xx_io_desc[] __initdata = { #endif #ifdef CONFIG_SOC_OMAP2420 -void __init omap242x_map_common_io(void) +void __init omap242x_map_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); @@ -273,7 +280,7 @@ void __init omap242x_map_common_io(void) #endif #ifdef CONFIG_SOC_OMAP2430 -void __init omap243x_map_common_io(void) +void __init omap243x_map_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); @@ -281,28 +288,28 @@ void __init omap243x_map_common_io(void) #endif #ifdef CONFIG_ARCH_OMAP3 -void __init omap34xx_map_common_io(void) +void __init omap3_map_io(void) { iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); } #endif #ifdef CONFIG_SOC_TI81XX -void __init omapti81xx_map_common_io(void) +void __init ti81xx_map_io(void) { iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc)); } #endif #ifdef CONFIG_SOC_AM33XX -void __init omapam33xx_map_common_io(void) +void __init am33xx_map_io(void) { iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); } #endif #ifdef CONFIG_ARCH_OMAP4 -void __init omap44xx_map_common_io(void) +void __init omap4_map_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); omap_barriers_init(); @@ -310,7 +317,7 @@ void __init omap44xx_map_common_io(void) #endif #ifdef CONFIG_SOC_OMAP5 -void __init omap5_map_common_io(void) +void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); } @@ -354,11 +361,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -static void __init omap_common_init_early(void) -{ - omap_init_consistent_dma_size(); -} - static void __init omap_hwmod_init_postsetup(void) { u8 postsetup_state; @@ -377,9 +379,15 @@ static void __init omap_hwmod_init_postsetup(void) #ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { - omap2_set_globals_242x(); + omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL); omap2xxx_check_revision(); - omap_common_init_early(); + omap2xxx_cm_init(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); @@ -399,9 +407,15 @@ void __init omap2420_init_late(void) #ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { - omap2_set_globals_243x(); + omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL); omap2xxx_check_revision(); - omap_common_init_early(); + omap2xxx_cm_init(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); @@ -425,10 +439,16 @@ void __init omap2430_init_late(void) #ifdef CONFIG_ARCH_OMAP3 void __init omap3_init_early(void) { - omap2_set_globals_3xxx(); + omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL); omap3xxx_check_revision(); omap3xxx_check_features(); - omap_common_init_early(); + omap3xxx_cm_init(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -459,10 +479,14 @@ void __init am35xx_init_early(void) void __init ti81xx_init_early(void) { - omap2_set_globals_ti81xx(); + omap2_set_globals_tap(OMAP343X_CLASS, + OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -517,10 +541,14 @@ void __init ti81xx_init_late(void) #ifdef CONFIG_SOC_AM33XX void __init am33xx_init_early(void) { - omap2_set_globals_am33xx(); + omap2_set_globals_tap(AM335X_CLASS, + AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); + omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE)); + omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); am33xx_voltagedomains_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); @@ -533,10 +561,18 @@ void __init am33xx_init_early(void) #ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { - omap2_set_globals_443x(); + omap2_set_globals_tap(OMAP443X_CLASS, + OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE)); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE)); + omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE)); + omap_prm_base_init(); + omap_cm_base_init(); omap4xxx_check_revision(); omap4xxx_check_features(); - omap_common_init_early(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); @@ -556,9 +592,17 @@ void __init omap4430_init_late(void) #ifdef CONFIG_SOC_OMAP5 void __init omap5_init_early(void) { - omap2_set_globals_5xxx(); + omap2_set_globals_tap(OMAP54XX_CLASS, + OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE)); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), + OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE)); + omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); + omap_prm_base_init(); + omap_cm_base_init(); omap5xxx_check_revision(); - omap_common_init_early(); } #endif diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c deleted file mode 100644 index eefc379..0000000 --- a/arch/arm/mach-omap2/iommu2.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * omap iommu: omap2/3 architecture specific functions - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, - * Paul Mundt and Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/err.h> -#include <linux/device.h> -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/stringify.h> - -#include <plat/iommu.h> - -/* - * omap2 architecture specific register bit definitions - */ -#define IOMMU_ARCH_VERSION 0x00000011 - -/* SYSCONF */ -#define MMU_SYS_IDLE_SHIFT 3 -#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT) -#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT) - -#define MMU_SYS_SOFTRESET (1 << 1) -#define MMU_SYS_AUTOIDLE 1 - -/* SYSSTATUS */ -#define MMU_SYS_RESETDONE 1 - -/* IRQSTATUS & IRQENABLE */ -#define MMU_IRQ_MULTIHITFAULT (1 << 4) -#define MMU_IRQ_TABLEWALKFAULT (1 << 3) -#define MMU_IRQ_EMUMISS (1 << 2) -#define MMU_IRQ_TRANSLATIONFAULT (1 << 1) -#define MMU_IRQ_TLBMISS (1 << 0) - -#define __MMU_IRQ_FAULT \ - (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT) -#define MMU_IRQ_MASK \ - (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS) -#define MMU_IRQ_TWL_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT) -#define MMU_IRQ_TLB_MISS_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS) - -/* MMU_CNTL */ -#define MMU_CNTL_SHIFT 1 -#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT) -#define MMU_CNTL_EML_TLB (1 << 3) -#define MMU_CNTL_TWL_EN (1 << 2) -#define MMU_CNTL_MMU_EN (1 << 1) - -#define get_cam_va_mask(pgsz) \ - (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \ - ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \ - ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ - ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) - - -static void __iommu_set_twl(struct omap_iommu *obj, bool on) -{ - u32 l = iommu_read_reg(obj, MMU_CNTL); - - if (on) - iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE); - else - iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE); - - l &= ~MMU_CNTL_MASK; - if (on) - l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); - else - l |= (MMU_CNTL_MMU_EN); - - iommu_write_reg(obj, l, MMU_CNTL); -} - - -static int omap2_iommu_enable(struct omap_iommu *obj) -{ - u32 l, pa; - unsigned long timeout; - - if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) - return -EINVAL; - - pa = virt_to_phys(obj->iopgd); - if (!IS_ALIGNED(pa, SZ_16K)) - return -EINVAL; - - iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG); - - timeout = jiffies + msecs_to_jiffies(20); - do { - l = iommu_read_reg(obj, MMU_SYSSTATUS); - if (l & MMU_SYS_RESETDONE) - break; - } while (!time_after(jiffies, timeout)); - - if (!(l & MMU_SYS_RESETDONE)) { - dev_err(obj->dev, "can't take mmu out of reset\n"); - return -ENODEV; - } - - l = iommu_read_reg(obj, MMU_REVISION); - dev_info(obj->dev, "%s: version %d.%d\n", obj->name, - (l >> 4) & 0xf, l & 0xf); - - l = iommu_read_reg(obj, MMU_SYSCONFIG); - l &= ~MMU_SYS_IDLE_MASK; - l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); - iommu_write_reg(obj, l, MMU_SYSCONFIG); - - iommu_write_reg(obj, pa, MMU_TTB); - - __iommu_set_twl(obj, true); - - return 0; -} - -static void omap2_iommu_disable(struct omap_iommu *obj) -{ - u32 l = iommu_read_reg(obj, MMU_CNTL); - - l &= ~MMU_CNTL_MASK; - iommu_write_reg(obj, l, MMU_CNTL); - iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG); - - dev_dbg(obj->dev, "%s is shutting down\n", obj->name); -} - -static void omap2_iommu_set_twl(struct omap_iommu *obj, bool on) -{ - __iommu_set_twl(obj, false); -} - -static u32 omap2_iommu_fault_isr(struct omap_iommu *obj, u32 *ra) -{ - u32 stat, da; - u32 errs = 0; - - stat = iommu_read_reg(obj, MMU_IRQSTATUS); - stat &= MMU_IRQ_MASK; - if (!stat) { - *ra = 0; - return 0; - } - - da = iommu_read_reg(obj, MMU_FAULT_AD); - *ra = da; - - if (stat & MMU_IRQ_TLBMISS) - errs |= OMAP_IOMMU_ERR_TLB_MISS; - if (stat & MMU_IRQ_TRANSLATIONFAULT) - errs |= OMAP_IOMMU_ERR_TRANS_FAULT; - if (stat & MMU_IRQ_EMUMISS) - errs |= OMAP_IOMMU_ERR_EMU_MISS; - if (stat & MMU_IRQ_TABLEWALKFAULT) - errs |= OMAP_IOMMU_ERR_TBLWALK_FAULT; - if (stat & MMU_IRQ_MULTIHITFAULT) - errs |= OMAP_IOMMU_ERR_MULTIHIT_FAULT; - iommu_write_reg(obj, stat, MMU_IRQSTATUS); - - return errs; -} - -static void omap2_tlb_read_cr(struct omap_iommu *obj, struct cr_regs *cr) -{ - cr->cam = iommu_read_reg(obj, MMU_READ_CAM); - cr->ram = iommu_read_reg(obj, MMU_READ_RAM); -} - -static void omap2_tlb_load_cr(struct omap_iommu *obj, struct cr_regs *cr) -{ - iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); - iommu_write_reg(obj, cr->ram, MMU_RAM); -} - -static u32 omap2_cr_to_virt(struct cr_regs *cr) -{ - u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK; - u32 mask = get_cam_va_mask(cr->cam & page_size); - - return cr->cam & mask; -} - -static struct cr_regs *omap2_alloc_cr(struct omap_iommu *obj, - struct iotlb_entry *e) -{ - struct cr_regs *cr; - - if (e->da & ~(get_cam_va_mask(e->pgsz))) { - dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__, - e->da); - return ERR_PTR(-EINVAL); - } - - cr = kmalloc(sizeof(*cr), GFP_KERNEL); - if (!cr) - return ERR_PTR(-ENOMEM); - - cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid; - cr->ram = e->pa | e->endian | e->elsz | e->mixed; - - return cr; -} - -static inline int omap2_cr_valid(struct cr_regs *cr) -{ - return cr->cam & MMU_CAM_V; -} - -static u32 omap2_get_pte_attr(struct iotlb_entry *e) -{ - u32 attr; - - attr = e->mixed << 5; - attr |= e->endian; - attr |= e->elsz >> 3; - attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) || - (e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6); - return attr; -} - -static ssize_t -omap2_dump_cr(struct omap_iommu *obj, struct cr_regs *cr, char *buf) -{ - char *p = buf; - - /* FIXME: Need more detail analysis of cam/ram */ - p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram, - (cr->cam & MMU_CAM_P) ? 1 : 0); - - return p - buf; -} - -#define pr_reg(name) \ - do { \ - ssize_t bytes; \ - const char *str = "%20s: %08x\n"; \ - const int maxcol = 32; \ - bytes = snprintf(p, maxcol, str, __stringify(name), \ - iommu_read_reg(obj, MMU_##name)); \ - p += bytes; \ - len -= bytes; \ - if (len < maxcol) \ - goto out; \ - } while (0) - -static ssize_t -omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len) -{ - char *p = buf; - - pr_reg(REVISION); - pr_reg(SYSCONFIG); - pr_reg(SYSSTATUS); - pr_reg(IRQSTATUS); - pr_reg(IRQENABLE); - pr_reg(WALKING_ST); - pr_reg(CNTL); - pr_reg(FAULT_AD); - pr_reg(TTB); - pr_reg(LOCK); - pr_reg(LD_TLB); - pr_reg(CAM); - pr_reg(RAM); - pr_reg(GFLUSH); - pr_reg(FLUSH_ENTRY); - pr_reg(READ_CAM); - pr_reg(READ_RAM); - pr_reg(EMU_FAULT_AD); -out: - return p - buf; -} - -static void omap2_iommu_save_ctx(struct omap_iommu *obj) -{ - int i; - u32 *p = obj->ctx; - - for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { - p[i] = iommu_read_reg(obj, i * sizeof(u32)); - dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); - } - - BUG_ON(p[0] != IOMMU_ARCH_VERSION); -} - -static void omap2_iommu_restore_ctx(struct omap_iommu *obj) -{ - int i; - u32 *p = obj->ctx; - - for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { - iommu_write_reg(obj, p[i], i * sizeof(u32)); - dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); - } - - BUG_ON(p[0] != IOMMU_ARCH_VERSION); -} - -static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) -{ - e->da = cr->cam & MMU_CAM_VATAG_MASK; - e->pa = cr->ram & MMU_RAM_PADDR_MASK; - e->valid = cr->cam & MMU_CAM_V; - e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK; - e->endian = cr->ram & MMU_RAM_ENDIAN_MASK; - e->elsz = cr->ram & MMU_RAM_ELSZ_MASK; - e->mixed = cr->ram & MMU_RAM_MIXED; -} - -static const struct iommu_functions omap2_iommu_ops = { - .version = IOMMU_ARCH_VERSION, - - .enable = omap2_iommu_enable, - .disable = omap2_iommu_disable, - .set_twl = omap2_iommu_set_twl, - .fault_isr = omap2_iommu_fault_isr, - - .tlb_read_cr = omap2_tlb_read_cr, - .tlb_load_cr = omap2_tlb_load_cr, - - .cr_to_e = omap2_cr_to_e, - .cr_to_virt = omap2_cr_to_virt, - .alloc_cr = omap2_alloc_cr, - .cr_valid = omap2_cr_valid, - .dump_cr = omap2_dump_cr, - - .get_pte_attr = omap2_get_pte_attr, - - .save_ctx = omap2_iommu_save_ctx, - .restore_ctx = omap2_iommu_restore_ctx, - .dump_ctx = omap2_iommu_dump_ctx, -}; - -static int __init omap2_iommu_init(void) -{ - return omap_install_iommu_arch(&omap2_iommu_ops); -} -module_init(omap2_iommu_init); - -static void __exit omap2_iommu_exit(void) -{ - omap_uninstall_iommu_arch(&omap2_iommu_ops); -} -module_exit(omap2_iommu_exit); - -MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); -MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 37f8f94..bf49651 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -19,16 +19,17 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/platform_data/asoc-ti-mcbsp.h> - -#include <plat/dma.h> -#include <plat/omap_device.h> #include <linux/pm_runtime.h> +#include <plat-omap/dma-omap.h> + +#include "omap_device.h" + /* * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. * Sidetone needs non-gated ICLK and sidetone autoidle is broken. */ -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" static int omap3_enable_st_clock(unsigned int id, bool enable) diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h new file mode 100644 index 0000000..0cd4b08 --- /dev/null +++ b/arch/arm/mach-omap2/mmc.h @@ -0,0 +1,23 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP24XX_NR_MMC 2 +#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE +#define OMAP2_MMC1_BASE 0x4809c000 + +#define OMAP4_MMC_REG_OFFSET 0x100 + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); +#else +static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) +{ +} +#endif + +struct omap_hwmod; +int omap_msdi_reset(struct omap_hwmod *oh); + +/* called from board-specific card detection service routine */ +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, + int is_closed); diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index 9e57b4a..aafdd4c 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -25,13 +25,13 @@ #include <linux/err.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/mmc.h> - +#include "prm.h" #include "common.h" #include "control.h" +#include "omap_hwmod.h" +#include "omap_device.h" #include "mux.h" +#include "mmc.h" /* * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register @@ -44,9 +44,6 @@ #define MSDI_CON_CLKD_MASK (0x3f << 0) #define MSDI_CON_CLKD_SHIFT 0 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */ #define MSDI_TARGET_RESET_CLKD 0x3ff diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 701e17c..2612634 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -36,8 +36,9 @@ #include <linux/interrupt.h> -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" +#include "soc.h" #include "control.h" #include "mux.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 502e313..0ea09fa 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,8 @@ #include <linux/linkage.h> #include <linux/init.h> +#include "omap44xx.h" + __CPUINIT /* Physical address needed since MMU not enabled yet on secondary core */ @@ -64,3 +66,39 @@ hold: ldr r12,=0x103 b secondary_startup ENDPROC(omap_secondary_startup) +ENTRY(omap_secondary_startup_4460) +hold_2: ldr r12,=0x103 + dsb + smc #0 @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 + bne hold_2 + + /* + * GIC distributor control register has changed between + * CortexA9 r1pX and r2pX. The Control Register secure + * banked version is now composed of 2 bits: + * bit 0 == Secure Enable + * bit 1 == Non-Secure Enable + * The Non-Secure banked register has not changed + * Because the ROM Code is based on the r1pX GIC, the CPU1 + * GIC restoration will cause a problem to CPU0 Non-Secure SW. + * The workaround must be: + * 1) Before doing the CPU1 wakeup, CPU0 must disable + * the GIC distributor + * 2) CPU1 must re-enable the GIC distributor on + * it's wakeup path. + */ + ldr r1, =OMAP44XX_GIC_DIST_BASE + ldr r0, [r1] + orr r0, #1 + str r0, [r1] + + /* + * we've been released from the wait loop,secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup +ENDPROC(omap_secondary_startup_4460) diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index df298d4..a6a4ff8 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -13,7 +13,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <plat/iommu.h> +#include <linux/platform_data/iommu-omap.h> #include "soc.h" #include "common.h" diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index ff4e6a0..aac46bf 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -50,6 +50,7 @@ #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> +#include "soc.h" #include "common.h" #include "omap44xx.h" #include "omap4-sar-layout.h" @@ -67,6 +68,7 @@ struct omap4_cpu_pm_info { void __iomem *scu_sar_addr; void __iomem *wkup_sar_addr; void __iomem *l2x0_sar_addr; + void (*secondary_startup)(void); }; static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); @@ -299,6 +301,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { unsigned int cpu_state = 0; + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -308,7 +311,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) clear_cpu_prev_pwrst(cpu); set_cpu_next_pwrst(cpu, power_state); - set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup)); + set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); scu_pwrst_prepare(cpu, power_state); /* @@ -359,6 +362,11 @@ int __init omap4_mpuss_init(void) pm_info->scu_sar_addr = sar_base + SCU_OFFSET1; pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1; + if (cpu_is_omap446x()) + pm_info->secondary_startup = omap_secondary_startup_4460; + else + pm_info->secondary_startup = omap_secondary_startup; + pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm"); if (!pm_info->pwrdm) { pr_err("Lookup failed for CPU1 pwrdm\n"); diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c index 9722f41..6a3be2b 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/mach-omap2/omap-pm-noop.c @@ -22,9 +22,8 @@ #include <linux/device.h> #include <linux/platform_device.h> -/* Interface documentation is in mach/omap-pm.h */ -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "omap_device.h" +#include "omap-pm.h" static bool off_mode_enabled; static int dummy_context_loss_counter; diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h index 67faa7b..67faa7b 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/mach-omap2/omap-pm.h diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index e089e4d..b970440 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -18,7 +18,6 @@ #include <asm/cacheflush.h> #include <asm/memblock.h> -#include <plat/omap-secure.h> #include "omap-secure.h" static phys_addr_t omap_secure_memblock_base; diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index c90a435..0e72917 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -52,6 +52,13 @@ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); extern u32 omap_smc2(u32 id, u32 falg, u32 pargs); extern phys_addr_t omap_secure_ram_mempool_base(void); +extern int omap_secure_ram_reserve_memblock(void); +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __ASSEMBLER__ */ #endif /* OMAP_ARCH_OMAP_SECURE_H */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4d05fa8..cd42d92 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -32,6 +32,7 @@ #include "iomap.h" #include "common.h" #include "clockdomain.h" +#include "pm.h" #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410FC090 @@ -39,6 +40,8 @@ #define OMAP5_CORE_COUNT 0x2 +u16 pm44xx_errata; + /* SCU base address */ static void __iomem *scu_base; @@ -118,8 +121,37 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * * 4.3.4.2 Power States of CPU0 and CPU1 */ if (booted) { + /* + * GIC distributor control register has changed between + * CortexA9 r1pX and r2pX. The Control Register secure + * banked version is now composed of 2 bits: + * bit 0 == Secure Enable + * bit 1 == Non-Secure Enable + * The Non-Secure banked register has not changed + * Because the ROM Code is based on the r1pX GIC, the CPU1 + * GIC restoration will cause a problem to CPU0 Non-Secure SW. + * The workaround must be: + * 1) Before doing the CPU1 wakeup, CPU0 must disable + * the GIC distributor + * 2) CPU1 must re-enable the GIC distributor on + * it's wakeup path. + */ + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { + local_irq_disable(); + gic_dist_disable(); + } + clkdm_wakeup(cpu1_clkdm); clkdm_allow_idle(cpu1_clkdm); + + if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { + while (gic_dist_disabled()) { + udelay(1); + cpu_relax(); + } + gic_timer_retrigger(); + local_irq_enable(); + } } else { dsb_sev(); booted = true; @@ -138,7 +170,14 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * static void __init wakeup_secondary(void) { + void *startup_addr = omap_secondary_startup; void __iomem *base = omap_get_wakeupgen_base(); + + if (cpu_is_omap446x()) { + startup_addr = omap_secondary_startup_4460; + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + } + /* * Write the address of secondary startup routine into the * AuxCoreBoot1 where ROM code will jump and start executing @@ -146,7 +185,7 @@ static void __init wakeup_secondary(void) * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) - omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); + omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else __raw_writel(virt_to_phys(omap5_secondary_startup), base + OMAP_AUX_CORE_BOOT_1); diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c new file mode 100644 index 0000000..be6bc89 --- /dev/null +++ b/arch/arm/mach-omap2/omap2-restart.c @@ -0,0 +1,65 @@ +/* + * omap2-restart.c - code common to all OMAP2xxx machines. + * + * Copyright (C) 2012 Texas Instruments + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include "common.h" +#include "prm2xxx.h" + +/* + * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set + * clock and the sys_ck. Used during the reset process + */ +static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck; + +/* Reboot handling */ + +/** + * omap2xxx_restart - Set DPLL to bypass mode for reboot to work + * + * Set the DPLL to bypass so that reboot completes successfully. No + * return value. + */ +void omap2xxx_restart(char mode, const char *cmd) +{ + u32 rate; + + rate = clk_get_rate(reset_sys_ck); + clk_set_rate(reset_virt_prcm_set_ck, rate); + + /* XXX Should save the cmd argument for use after the reboot */ + + omap2xxx_prm_dpll_reset(); /* never returns */ + while (1); +} + +/** + * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart + * + * Some clocks need to be looked up in advance for the SoC restart + * operation to work - see omap2xxx_restart(). Returns -EINVAL upon + * error or 0 upon success. + */ +static int __init omap2xxx_common_look_up_clks_for_reset(void) +{ + reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set"); + if (IS_ERR(reset_virt_prcm_set_ck)) + return -EINVAL; + + reset_sys_ck = clk_get(NULL, "sys_ck"); + if (IS_ERR(reset_sys_ck)) + return -EINVAL; + + return 0; +} +core_initcall(omap2xxx_common_look_up_clks_for_reset); diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c new file mode 100644 index 0000000..923c582 --- /dev/null +++ b/arch/arm/mach-omap2/omap3-restart.c @@ -0,0 +1,36 @@ +/* + * omap3-restart.c - Code common to all OMAP3xxx machines. + * + * Copyright (C) 2009, 2012 Texas Instruments + * Copyright (C) 2010 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include "iomap.h" +#include "common.h" +#include "control.h" +#include "prm3xxx.h" + +/* Global address base setup code */ + +/** + * omap3xxx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + */ +void omap3xxx_restart(char mode, const char *cmd) +{ + omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); + omap3xxx_prm_dpll3_reset(); /* never returns */ + while (1); +} diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index e1f2897..6897ae2 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/platform_device.h> #include <linux/memblock.h> #include <linux/of_irq.h> @@ -24,23 +25,29 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> - -#include <plat/sram.h> -#include <plat/omap-secure.h> -#include <plat/mmc.h> +#include <asm/smp_twd.h> #include "omap-wakeupgen.h" - #include "soc.h" +#include "iomap.h" #include "common.h" +#include "mmc.h" #include "hsmmc.h" +#include "prminst44xx.h" +#include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" +#include "omap-secure.h" +#include "sram.h" #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; #endif static void __iomem *sar_ram_base; +static void __iomem *gic_dist_base_addr; +static void __iomem *twd_base; + +#define IRQ_LOCALTIMER 29 #ifdef CONFIG_OMAP4_ERRATA_I688 /* Used to implement memory barrier on DRAM path */ @@ -95,12 +102,14 @@ void __init omap_barriers_init(void) void __init gic_init_irq(void) { void __iomem *omap_irq_base; - void __iomem *gic_dist_base_addr; /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K); + BUG_ON(!twd_base); + /* Static mapping, never released */ omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); BUG_ON(!omap_irq_base); @@ -110,6 +119,38 @@ void __init gic_init_irq(void) gic_init(0, 29, gic_dist_base_addr, omap_irq_base); } +void gic_dist_disable(void) +{ + if (gic_dist_base_addr) + __raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL); +} + +bool gic_dist_disabled(void) +{ + return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); +} + +void gic_timer_retrigger(void) +{ + u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT); + u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET); + u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + + if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) { + /* + * The local timer interrupt got lost while the distributor was + * disabled. Ack the pending interrupt, and retrigger it. + */ + pr_warn("%s: lost localtimer interrupt\n", __func__); + __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) { + __raw_writel(1, twd_base + TWD_TIMER_COUNTER); + twd_ctrl |= TWD_TIMER_CONTROL_ENABLE; + __raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL); + } + } +} + #ifdef CONFIG_CACHE_L2X0 void __iomem *omap4_get_l2cache_base(void) @@ -281,3 +322,19 @@ int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } #endif + +/** + * omap44xx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + */ +void omap44xx_restart(char mode, const char *cmd) +{ + /* XXX Should save 'cmd' into scratchpad for use after reboot */ + omap4_prminst_global_warm_sw_reset(); /* never returns */ + while (1); +} + diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 7a7d1f2..0ef934f 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -89,9 +89,8 @@ #include <linux/of.h> #include <linux/notifier.h> -#include <plat/omap_device.h> -#include <plat/omap_hwmod.h> -#include <plat/clock.h> +#include "omap_device.h" +#include "omap_hwmod.h" /* These parameters are passed to _omap_device_{de,}activate() */ #define USE_WAKEUP_LAT 0 diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/mach-omap2/omap_device.h index 106f506..0933c59 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/mach-omap2/omap_device.h @@ -34,7 +34,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" extern struct dev_pm_domain omap_device_pm_domain; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 87cc6d0..b3b00f4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -139,27 +139,25 @@ #include <linux/slab.h> #include <linux/bootmem.h> -#include <plat/clock.h> -#include <plat/omap_hwmod.h> -#include <plat/prcm.h> +#include "clock.h" +#include "omap_hwmod.h" #include "soc.h" #include "common.h" #include "clockdomain.h" #include "powerdomain.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" +#include "cm3xxx.h" #include "cminst44xx.h" #include "cm33xx.h" -#include "prm2xxx_3xxx.h" +#include "prm.h" +#include "prm3xxx.h" #include "prm44xx.h" #include "prm33xx.h" #include "prminst44xx.h" #include "mux.h" #include "pm.h" -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /* Name of the OMAP hwmod for the MPU */ #define MPU_INITIATOR_NAME "mpu" @@ -2095,7 +2093,8 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); @@ -2703,7 +2702,34 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) /* Static functions intended only for use in soc_ops field function pointers */ /** - * _omap2_wait_target_ready - wait for a module to leave slave idle + * _omap2xxx_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ + + return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); +} + +/** + * _omap3xxx_wait_target_ready - wait for a module to leave slave idle * @oh: struct omap_hwmod * * * Wait for a module @oh to leave slave idle. Returns 0 if the module @@ -2711,7 +2737,7 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) * slave idle; otherwise, pass along the return value of the * appropriate *_cm*_wait_module_ready() function. */ -static int _omap2_wait_target_ready(struct omap_hwmod *oh) +static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh) { if (!oh) return -EINVAL; @@ -2724,9 +2750,9 @@ static int _omap2_wait_target_ready(struct omap_hwmod *oh) /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ - return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); + return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); } /** @@ -3994,8 +4020,13 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) */ void __init omap_hwmod_init(void) { - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - soc_ops.wait_target_ready = _omap2_wait_target_ready; + if (cpu_is_omap24xx()) { + soc_ops.wait_target_ready = _omap2xxx_wait_target_ready; + soc_ops.assert_hardreset = _omap2_assert_hardreset; + soc_ops.deassert_hardreset = _omap2_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; + } else if (cpu_is_omap34xx()) { + soc_ops.wait_target_ready = _omap3xxx_wait_target_ready; soc_ops.assert_hardreset = _omap2_assert_hardreset; soc_ops.deassert_hardreset = _omap2_deassert_hardreset; soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 1db0294..87a3c5b 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -35,7 +35,6 @@ #include <linux/list.h> #include <linux/ioport.h> #include <linux/spinlock.h> -#include <plat/cpu.h> struct omap_device; diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b5db600..e8efe3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -12,21 +12,23 @@ * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> -#include <plat/i2c.h> -#include <plat/dmtimer.h> +#include <plat-omap/dma-omap.h> + +#include "omap_hwmod.h" #include "l3_2xxx.h" #include "l4_2xxx.h" -#include <plat/mmc.h> #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" +#include "i2c.h" +#include "mmc.h" +#include "serial.h" #include "wd_timer.h" /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c455e41..32d17e3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -12,21 +12,22 @@ * XXX handle crossbar/shared link difference for L3? * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> -#include <plat/i2c.h> -#include <plat/dmtimer.h> -#include <plat/mmc.h> +#include <plat-omap/dma-omap.h> + +#include "omap_hwmod.h" +#include "mmc.h" #include "l3_2xxx.h" #include "soc.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" +#include "i2c.h" #include "wd_timer.h" /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c index cbb4ef6..0413dab 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c @@ -13,8 +13,7 @@ */ #include <asm/sizes.h> -#include <plat/omap_hwmod.h> -#include <plat/serial.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 8851bbb..40d6c93 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -9,13 +9,14 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <plat/omap_hwmod.h> -#include <plat/serial.h> -#include <plat/dma.h> -#include <plat/common.h> + +#include <plat-omap/dma-omap.h> + +#include "omap_hwmod.h" #include "hdq1w.h" #include "omap_hwmod_common_data.h" +#include "dma.h" /* UART */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 1a1287d..47901a5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -13,10 +13,10 @@ */ #include <asm/sizes.h> -#include <plat/omap_hwmod.h> -#include <plat/serial.h> +#include "omap_hwmod.h" #include "l3_2xxx.h" #include "l4_2xxx.h" +#include "serial.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index bd9220e..0db8f45 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -8,13 +8,13 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <plat/omap_hwmod.h> -#include <plat/serial.h> + #include <linux/platform_data/gpio-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" @@ -58,8 +58,9 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -268,6 +269,7 @@ struct omap_hwmod omap2xxx_timer1_hwmod = { }, .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -286,6 +288,7 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -304,6 +307,7 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -322,6 +326,7 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -341,6 +346,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -360,6 +366,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -379,6 +386,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -398,6 +406,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -417,6 +426,7 @@ struct omap_hwmod omap2xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -436,6 +446,7 @@ struct omap_hwmod omap2xxx_timer10_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -455,6 +466,7 @@ struct omap_hwmod omap2xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -474,6 +486,7 @@ struct omap_hwmod omap2xxx_timer12_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* wd_timer2 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 59d5c1c..ad8d43b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -14,13 +14,11 @@ * GNU General Public License for more details. */ -#include <plat/omap_hwmod.h> -#include <plat/cpu.h> +#include <linux/i2c-omap.h> + +#include "omap_hwmod.h" #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/dma.h> -#include <plat/mmc.h> -#include <plat/i2c.h> #include "omap_hwmod_common_data.h" @@ -28,6 +26,8 @@ #include "cm33xx.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" +#include "i2c.h" +#include "mmc.h" /* * IP blocks diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f67b7ee..7f73f21 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -14,28 +14,32 @@ * * XXX these should be marked initdata for multi-OMAP kernels */ + +#include <linux/i2c-omap.h> #include <linux/power/smartreflex.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/dma.h> -#include <plat/serial.h> +#include <plat-omap/dma-omap.h> #include "l3_3xxx.h" #include "l4_3xxx.h" -#include <plat/i2c.h> -#include <plat/mmc.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> -#include <plat/iommu.h> #include "am35xx.h" #include "soc.h" +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" + +#include "dma.h" +#include "i2c.h" +#include "mmc.h" #include "wd_timer.h" +#include "serial.h" /* * OMAP3xxx hardware module integration data @@ -149,29 +153,16 @@ static struct omap_hwmod omap3xxx_debugss_hwmod = { }; /* timer class */ -static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = { - .name = "timer", - .sysc = &omap3xxx_timer_1ms_sysc, -}; - static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -220,7 +211,8 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -237,7 +229,8 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, }, }, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -255,6 +248,7 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -272,6 +266,7 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -290,6 +285,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -308,6 +304,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -326,6 +323,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -344,6 +342,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -362,6 +361,7 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -379,7 +379,8 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -398,6 +399,7 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -421,6 +423,7 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = { }, .dev_attr = &capability_secure_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0b1249e..26f8e9f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,23 +21,24 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> -#include <linux/platform_data/omap_ocp2scp.h> +#include <linux/i2c-omap.h> + +#include <plat-omap/dma-omap.h> -#include <plat/omap_hwmod.h> -#include <plat/i2c.h> -#include <plat/dma.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <plat/mmc.h> +#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> -#include <plat/common.h> -#include <plat/iommu.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm1_44xx.h" #include "cm2_44xx.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" +#include "i2c.h" +#include "mmc.h" #include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ @@ -3102,6 +3103,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = { SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -3155,6 +3157,7 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { .name = "timer1", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer1_irqs, .main_clk = "timer1_fck", .prcm = { @@ -3177,6 +3180,7 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .name = "timer2", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer2_irqs, .main_clk = "timer2_fck", .prcm = { @@ -3351,6 +3355,7 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { .name = "timer10", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer10_irqs, .main_clk = "timer10_fck", .prcm = { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 9f1ccdc..79d623b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -16,7 +16,7 @@ * data and their integration with other OMAP modules and Linux. */ -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "omap_hwmod_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 2bc8f17..cfcce29 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -13,7 +13,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H #define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "common.h" #include "display.h" diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h index c784c12..7e437bf 100644 --- a/arch/arm/mach-omap2/omap_opp_data.h +++ b/arch/arm/mach-omap2/omap_opp_data.h @@ -19,7 +19,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H #define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index d992db8..4d76a3c 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -27,11 +27,11 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/usb.h> - -#include <plat/usb.h> +#include <linux/usb/musb.h> #include "soc.h" #include "control.h" +#include "usb.h" void am35x_musb_reset(void) { diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index f515a1a..2bf35dc 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/i2c/twl.h> +#include "soc.h" #include "voltage.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 58e16ae..bd41d59 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -20,7 +20,7 @@ #include <linux/opp.h> #include <linux/cpu.h> -#include <plat/omap_device.h> +#include "omap_device.h" #include "omap_opp_data.h" diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index 75cef5f..62772e0 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -19,6 +19,7 @@ */ #include <linux/module.h> +#include "soc.h" #include "control.h" #include "omap_opp_data.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 46092cd..e2c291f 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -27,12 +27,12 @@ #include <linux/module.h> #include <linux/slab.h> -#include <plat/clock.h> +#include "clock.h" #include "powerdomain.h" #include "clockdomain.h" -#include <plat/dmtimer.h> -#include <plat/omap-pm.h> +#include "omap-pm.h" +#include "soc.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index ea61c32..331478f 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -20,10 +20,11 @@ #include <asm/system_misc.h> -#include <plat/omap-pm.h> -#include <plat/omap_device.h> +#include "omap-pm.h" +#include "omap_device.h" #include "common.h" +#include "soc.h" #include "prcm-common.h" #include "voltage.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 67d6613..fc3c96d 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -102,6 +102,15 @@ extern void enable_omap3630_toggle_l2_on_restore(void); static inline void enable_omap3630_toggle_l2_on_restore(void) { } #endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */ +#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) + +#if defined(CONFIG_ARCH_OMAP4) +extern u16 pm44xx_errata; +#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id)) +#else +#define IS_PM44XX_ERRATUM(id) 0 +#endif + #ifdef CONFIG_POWER_AVS_OMAP extern int omap_devinit_smartreflex(void); extern void omap_enable_smartreflex_on_init(void); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 8af6cd6..13e1f43 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -31,21 +31,24 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <asm/fncpy.h> + #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> #include <asm/system_misc.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "soc.h" #include "common.h" -#include "prm2xxx_3xxx.h" +#include "clock.h" +#include "prm2xxx.h" #include "prm-regbits-24xx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" #include "pm.h" #include "control.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3a904de..7703200 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -32,25 +32,24 @@ #include <trace/events/power.h> +#include <asm/fncpy.h> #include <asm/suspend.h> #include <asm/system_misc.h> -#include <plat/sram.h> #include "clockdomain.h" #include "powerdomain.h" -#include <plat/sdrc.h> -#include <plat/prcm.h> -#include <plat/gpmc.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> +#include "soc.h" #include "common.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" +#include "gpmc.h" #include "prm-regbits-34xx.h" - -#include "prm2xxx_3xxx.h" +#include "prm3xxx.h" #include "pm.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* pm34xx errata defined in pm.h */ diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 04922d1..7da75ae 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -18,6 +18,7 @@ #include <linux/slab.h> #include <asm/system_misc.h> +#include "soc.h" #include "common.h" #include "clockdomain.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 2a79176..250d909 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -15,8 +15,9 @@ #include <asm/pmu.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "soc.h" +#include "omap_hwmod.h" +#include "omap_device.h" static char *omap2_pmu_oh_names[] = {"mpu"}; static char *omap3_pmu_oh_names[] = {"mpu", "debugss"}; @@ -57,8 +58,6 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) if (IS_ERR(omap_pmu_dev)) return PTR_ERR(omap_pmu_dev); - pm_runtime_enable(&omap_pmu_dev->dev); - return 0; } diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 1678a32..dea62a9 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -29,8 +29,6 @@ #include <asm/cpu.h> -#include <plat/prcm.h> - #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index baee906..5277d56eb 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -22,8 +22,6 @@ #include <linux/atomic.h> -#include <plat/cpu.h> - #include "voltage.h" /* Powerdomain basic power states */ diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c deleted file mode 100644 index 3950ccf..0000000 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * OMAP2 and OMAP3 powerdomain control - * - * Copyright (C) 2009-2011 Texas Instruments, Inc. - * Copyright (C) 2007-2009 Nokia Corporation - * - * Derived from mach-omap2/powerdomain.c written by Paul Walmsley - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/bug.h> - -#include <plat/prcm.h> - -#include "powerdomain.h" -#include "prm.h" -#include "prm-regbits-24xx.h" -#include "prm-regbits-34xx.h" - - -/* Common functions across OMAP2 and OMAP3 */ -static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) -{ - omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, - (pwrst << OMAP_POWERSTATE_SHIFT), - pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); - return 0; -} - -static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL, - OMAP_POWERSTATE_MASK); -} - -static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTST, - OMAP_POWERSTATEST_MASK); -} - -static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); - - omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL); - - return 0; -} - -static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - - omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL); - - return 0; -} - -static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_stst_mask(bank); - - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST, - m); -} - -static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL, m); -} - -static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) -{ - u32 v; - - v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK); - omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v, - pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); - - return 0; -} - -static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm) -{ - u32 c = 0; - - /* - * REVISIT: pwrdm_wait_transition() may be better implemented - * via a callback and a periodic timer check -- how long do we expect - * powerdomain transitions to take? - */ - - /* XXX Is this udelay() value meaningful? */ - while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) & - OMAP_INTRANSITION_MASK) && - (c++ < PWRDM_TRANSITION_BAILOUT)) - udelay(1); - - if (c > PWRDM_TRANSITION_BAILOUT) { - pr_err("powerdomain: %s: waited too long to complete transition\n", - pwrdm->name); - return -EAGAIN; - } - - pr_debug("powerdomain: completed transition in %d loops\n", c); - - return 0; -} - -/* Applicable only for OMAP3. Not supported on OMAP2 */ -static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP3430_PM_PREPWSTST, - OMAP3430_LASTPOWERSTATEENTERED_MASK); -} - -static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTST, - OMAP3430_LOGICSTATEST_MASK); -} - -static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL, - OMAP3430_LOGICSTATEST_MASK); -} - -static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP3430_PM_PREPWSTST, - OMAP3430_LASTLOGICSTATEENTERED_MASK); -} - -static int omap3_get_mem_bank_lastmemst_mask(u8 bank) -{ - switch (bank) { - case 0: - return OMAP3430_LASTMEM1STATEENTERED_MASK; - case 1: - return OMAP3430_LASTMEM2STATEENTERED_MASK; - case 2: - return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK; - case 3: - return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK; - default: - WARN_ON(1); /* should never happen */ - return -EEXIST; - } - return 0; -} - -static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m; - - m = omap3_get_mem_bank_lastmemst_mask(bank); - - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP3430_PM_PREPWSTST, m); -} - -static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) -{ - omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST); - return 0; -} - -static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) -{ - return omap2_prm_rmw_mod_reg_bits(0, - 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, - pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); -} - -static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) -{ - return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, - 0, pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL); -} - -struct pwrdm_ops omap2_pwrdm_operations = { - .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, - .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, - .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, - .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, - .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, - .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, - .pwrdm_wait_transition = omap2_pwrdm_wait_transition, -}; - -struct pwrdm_ops omap3_pwrdm_operations = { - .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst, - .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, - .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst, - .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst, - .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst, - .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, - .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, - .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, - .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, - .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst, - .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst, - .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar, - .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar, - .pwrdm_wait_transition = omap2_pwrdm_wait_transition, -}; diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c deleted file mode 100644 index 67c5663..0000000 --- a/arch/arm/mach-omap2/powerdomain33xx.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * AM33XX Powerdomain control - * - * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak - * <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/delay.h> - -#include <plat/prcm.h> - -#include "powerdomain.h" -#include "prm33xx.h" -#include "prm-regbits-33xx.h" - - -static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) -{ - am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK, - (pwrst << OMAP_POWERSTATE_SHIFT), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - return 0; -} - -static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - v &= OMAP_POWERSTATE_MASK; - v >>= OMAP_POWERSTATE_SHIFT; - - return v; -} - -static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= OMAP_POWERSTATEST_MASK; - v >>= OMAP_POWERSTATEST_SHIFT; - - return v; -} - -static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= AM33XX_LASTPOWERSTATEENTERED_MASK; - v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; - - return v; -} - -static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) -{ - am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, - (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - return 0; -} - -static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) -{ - am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK, - AM33XX_LASTPOWERSTATEENTERED_MASK, - pwrdm->prcm_offs, pwrdm->pwrstst_offs); - return 0; -} - -static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) -{ - u32 m; - - m = pwrdm->logicretstate_mask; - if (!m) - return -EINVAL; - - am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - - return 0; -} - -static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= AM33XX_LOGICSTATEST_MASK; - v >>= AM33XX_LOGICSTATEST_SHIFT; - - return v; -} - -static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm) -{ - u32 v, m; - - m = pwrdm->logicretstate_mask; - if (!m) - return -EINVAL; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - v &= m; - v >>= __ffs(m); - - return v; -} - -static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = pwrdm->mem_on_mask[bank]; - if (!m) - return -EINVAL; - - am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - - return 0; -} - -static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = pwrdm->mem_ret_mask[bank]; - if (!m) - return -EINVAL; - - am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - - return 0; -} - -static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m, v; - - m = pwrdm->mem_pwrst_mask[bank]; - if (!m) - return -EINVAL; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); - v &= m; - v >>= __ffs(m); - - return v; -} - -static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m, v; - - m = pwrdm->mem_retst_mask[bank]; - if (!m) - return -EINVAL; - - v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); - v &= m; - v >>= __ffs(m); - - return v; -} - -static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm) -{ - u32 c = 0; - - /* - * REVISIT: pwrdm_wait_transition() may be better implemented - * via a callback and a periodic timer check -- how long do we expect - * powerdomain transitions to take? - */ - - /* XXX Is this udelay() value meaningful? */ - while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs) - & OMAP_INTRANSITION_MASK) && - (c++ < PWRDM_TRANSITION_BAILOUT)) - udelay(1); - - if (c > PWRDM_TRANSITION_BAILOUT) { - pr_err("powerdomain: %s: waited too long to complete transition\n", - pwrdm->name); - return -EAGAIN; - } - - pr_debug("powerdomain: completed transition in %d loops\n", c); - - return 0; -} - -struct pwrdm_ops am33xx_pwrdm_operations = { - .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, - .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, - .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, - .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, - .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst, - .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange, - .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst, - .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst, - .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst, - .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst, - .pwrdm_wait_transition = am33xx_pwrdm_wait_transition, -}; diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c deleted file mode 100644 index aceb4f4..0000000 --- a/arch/arm/mach-omap2/powerdomain44xx.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * OMAP4 powerdomain control - * - * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc. - * Copyright (C) 2007-2009 Nokia Corporation - * - * Derived from mach-omap2/powerdomain.c written by Paul Walmsley - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/bug.h> - -#include "powerdomain.h" -#include <plat/prcm.h> -#include "prm2xxx_3xxx.h" -#include "prm44xx.h" -#include "prminst44xx.h" -#include "prm-regbits-44xx.h" - -static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) -{ - omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK, - (pwrst << OMAP_POWERSTATE_SHIFT), - pwrdm->prcm_partition, - pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL); - return 0; -} - -static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - v &= OMAP_POWERSTATE_MASK; - v >>= OMAP_POWERSTATE_SHIFT; - - return v; -} - -static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTST); - v &= OMAP_POWERSTATEST_MASK; - v >>= OMAP_POWERSTATEST_SHIFT; - - return v; -} - -static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTST); - v &= OMAP4430_LASTPOWERSTATEENTERED_MASK; - v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT; - - return v; -} - -static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) -{ - omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK, - (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT), - pwrdm->prcm_partition, - pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL); - return 0; -} - -static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) -{ - omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK, - OMAP4430_LASTPOWERSTATEENTERED_MASK, - pwrdm->prcm_partition, - pwrdm->prcm_offs, OMAP4_PM_PWSTST); - return 0; -} - -static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) -{ - u32 v; - - v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK); - omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v, - pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - - return 0; -} - -static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); - - omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - - return 0; -} - -static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, - u8 pwrst) -{ - u32 m; - - m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - - omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)), - pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - - return 0; -} - -static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTST); - v &= OMAP4430_LOGICSTATEST_MASK; - v >>= OMAP4430_LOGICSTATEST_SHIFT; - - return v; -} - -static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm) -{ - u32 v; - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - v &= OMAP4430_LOGICRETSTATE_MASK; - v >>= OMAP4430_LOGICRETSTATE_SHIFT; - - return v; -} - -/** - * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate - * @pwrdm: struct powerdomain * to read the state for - * - * Reads the previous logic powerstate for a powerdomain. This - * function must determine the previous logic powerstate by first - * checking the previous powerstate for the domain. If that was OFF, - * then logic has been lost. If previous state was RETENTION, the - * function reads the setting for the next retention logic state to - * see the actual value. In every other case, the logic is - * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET - * depending whether the logic was retained or not. - */ -static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) -{ - int state; - - state = omap4_pwrdm_read_prev_pwrst(pwrdm); - - if (state == PWRDM_POWER_OFF) - return PWRDM_POWER_OFF; - - if (state != PWRDM_POWER_RET) - return PWRDM_POWER_RET; - - return omap4_pwrdm_read_logic_retst(pwrdm); -} - -static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m, v; - - m = omap2_pwrdm_get_mem_bank_stst_mask(bank); - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTST); - v &= m; - v >>= __ffs(m); - - return v; -} - -static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) -{ - u32 m, v; - - m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - - v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, - OMAP4_PM_PWSTCTRL); - v &= m; - v >>= __ffs(m); - - return v; -} - -/** - * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate - * @pwrdm: struct powerdomain * to read mem powerstate for - * @bank: memory bank index - * - * Reads the previous memory powerstate for a powerdomain. This - * function must determine the previous memory powerstate by first - * checking the previous powerstate for the domain. If that was OFF, - * then logic has been lost. If previous state was RETENTION, the - * function reads the setting for the next memory retention state to - * see the actual value. In every other case, the logic is - * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET - * depending whether logic was retained or not. - */ -static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) -{ - int state; - - state = omap4_pwrdm_read_prev_pwrst(pwrdm); - - if (state == PWRDM_POWER_OFF) - return PWRDM_POWER_OFF; - - if (state != PWRDM_POWER_RET) - return PWRDM_POWER_RET; - - return omap4_pwrdm_read_mem_retst(pwrdm, bank); -} - -static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm) -{ - u32 c = 0; - - /* - * REVISIT: pwrdm_wait_transition() may be better implemented - * via a callback and a periodic timer check -- how long do we expect - * powerdomain transitions to take? - */ - - /* XXX Is this udelay() value meaningful? */ - while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition, - pwrdm->prcm_offs, - OMAP4_PM_PWSTST) & - OMAP_INTRANSITION_MASK) && - (c++ < PWRDM_TRANSITION_BAILOUT)) - udelay(1); - - if (c > PWRDM_TRANSITION_BAILOUT) { - pr_err("powerdomain: %s: waited too long to complete transition\n", - pwrdm->name); - return -EAGAIN; - } - - pr_debug("powerdomain: completed transition in %d loops\n", c); - - return 0; -} - -struct pwrdm_ops omap4_pwrdm_operations = { - .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst, - .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst, - .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange, - .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst, - .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst, - .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst, - .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst, - .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst, - .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst, - .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst, - .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst, - .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst, - .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst, - .pwrdm_wait_transition = omap4_pwrdm_wait_transition, -}; diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index 2385c1f..ba520d4 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include "soc.h" #include "powerdomain.h" #include "powerdomains2xxx_3xxx_data.h" diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 72df974..c7d355f 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -406,11 +406,6 @@ #define OMAP3430_EN_CORE_MASK (1 << 0) -/* - * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP - * submodule to exit hardreset - */ -#define MAX_MODULE_HARDRESET_WAIT 10000 /* * Maximum time(us) it takes to output the signal WUCLKOUT of the last @@ -419,24 +414,7 @@ * microseconds on OMAP4, so this timeout may be too high. */ #define MAX_IOPAD_LATCH_TIME 100 - # ifndef __ASSEMBLER__ -extern void __iomem *prm_base; -extern void __iomem *cm_base; -extern void __iomem *cm2_base; -extern void __iomem *prcm_mpu_base; - -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) -extern void omap_prm_base_init(void); -extern void omap_cm_base_init(void); -#else -static inline void omap_prm_base_init(void) -{ -} -static inline void omap_cm_base_init(void) -{ -} -#endif /** * struct omap_prcm_irq - describes a PRCM interrupt bit diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c deleted file mode 100644 index 0f51e03..0000000 --- a/arch/arm/mach-omap2/prcm.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/prcm.c - * - * OMAP 24xx Power Reset and Clock Management (PRCM) functions - * - * Copyright (C) 2005 Nokia Corporation - * - * Written by Tony Lindgren <tony.lindgren@nokia.com> - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Rajendra Nayak <rnayak@ti.com> - * - * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc. - * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/export.h> - -#include "common.h" -#include <plat/prcm.h> - -#include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx_3xxx.h" -#include "prm2xxx_3xxx.h" -#include "prm44xx.h" -#include "prminst44xx.h" -#include "cminst44xx.h" -#include "prm-regbits-24xx.h" -#include "prm-regbits-44xx.h" -#include "control.h" - -void __iomem *prm_base; -void __iomem *cm_base; -void __iomem *cm2_base; -void __iomem *prcm_mpu_base; - -#define MAX_MODULE_ENABLE_WAIT 100000 - -u32 omap_prcm_get_reset_sources(void) -{ - /* XXX This presumably needs modification for 34XX */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f; - if (cpu_is_omap44xx()) - return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f; - - return 0; -} -EXPORT_SYMBOL(omap_prcm_get_reset_sources); - -/* Resets clock rates and reboots the system. Only called from system.h */ -void omap_prcm_restart(char mode, const char *cmd) -{ - s16 prcm_offs = 0; - - if (cpu_is_omap24xx()) { - omap2xxx_clk_prepare_for_reboot(); - - prcm_offs = WKUP_MOD; - } else if (cpu_is_omap34xx()) { - prcm_offs = OMAP3430_GR_MOD; - omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); - } else if (cpu_is_omap44xx()) { - omap4_prminst_global_warm_sw_reset(); /* never returns */ - } else { - WARN_ON(1); - } - - /* - * As per Errata i520, in some cases, user will not be able to - * access DDR memory after warm-reset. - * This situation occurs while the warm-reset happens during a read - * access to DDR memory. In that particular condition, DDR memory - * does not respond to a corrupted read command due to the warm - * reset occurrence but SDRC is waiting for read completion. - * SDRC is not sensitive to the warm reset, but the interconnect is - * reset on the fly, thus causing a misalignment between SDRC logic, - * interconnect logic and DDR memory state. - * WORKAROUND: - * Steps to perform before a Warm reset is trigged: - * 1. enable self-refresh on idle request - * 2. put SDRC in idle - * 3. wait until SDRC goes to idle - * 4. generate SW reset (Global SW reset) - * - * Steps to be performed after warm reset occurs (in bootloader): - * if HW warm reset is the source, apply below steps before any - * accesses to SDRAM: - * 1. Reset SMS and SDRC and wait till reset is complete - * 2. Re-initialize SMS, SDRC and memory - * - * NOTE: Above work around is required only if arch reset is implemented - * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need - * the WA since it resets SDRC as well as part of cold reset. - */ - - /* XXX should be moved to some OMAP2/3 specific code */ - omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, - OMAP2_RM_RSTCTRL); - omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */ -} - -/** - * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness - * @reg: physical address of module IDLEST register - * @mask: value to mask against to determine if the module is active - * @idlest: idle state indicator (0 or 1) for the clock - * @name: name of the clock (for printk) - * - * Returns 1 if the module indicated readiness in time, or 0 if it - * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. - * - * XXX This function is deprecated. It should be removed once the - * hwmod conversion is complete. - */ -int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, - const char *name) -{ - int i = 0; - int ena = 0; - - if (idlest) - ena = 0; - else - ena = mask; - - /* Wait for lock */ - omap_test_timeout(((__raw_readl(reg) & mask) == ena), - MAX_MODULE_ENABLE_WAIT, i); - - if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("cm: Module associated with clock %s ready after %d loops\n", - name, i); - else - pr_err("cm: Module associated with clock %s didn't enable in %d tries\n", - name, MAX_MODULE_ENABLE_WAIT); - - return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; -}; - -void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) -{ - if (omap2_globals->prm) - prm_base = omap2_globals->prm; - if (omap2_globals->cm) - cm_base = omap2_globals->cm; - if (omap2_globals->cm2) - cm2_base = omap2_globals->cm2; - if (omap2_globals->prcm_mpu) - prcm_mpu_base = omap2_globals->prcm_mpu; - - if (cpu_is_omap44xx() || soc_is_omap54xx()) { - omap_prm_base_init(); - omap_cm_base_init(); - } -} - -/* - * Stubbed functions so that common files continue to build when - * custom builds are used - * XXX These are temporary and should be removed at the earliest possible - * opportunity - */ -int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ - return 0; -} - -void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, - s16 cdoffs, u16 clkctrl_offs) -{ -} - -void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ -} diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index 928dbd4..c30e44a 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -20,6 +20,12 @@ #include "prcm_mpu44xx.h" #include "cm-regbits-44xx.h" +/* + * prcm_mpu_base: the virtual address of the start of the PRCM_MPU IP + * block registers + */ +void __iomem *prcm_mpu_base; + /* PRCM_MPU low-level functions */ u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg) @@ -43,3 +49,14 @@ u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) return v; } + +/** + * omap2_set_globals_prcm_mpu - set the MPU PRCM base address (for early use) + * @prcm_mpu: PRCM_MPU base virtual address + * + * XXX Will be replaced when the PRM/CM drivers are completed. + */ +void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu) +{ + prcm_mpu_base = prcm_mpu; +} diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 8a6e250..884af7b 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -1,7 +1,7 @@ /* * OMAP44xx PRCM MPU instance offset macros * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010, 2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) @@ -25,6 +25,12 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H +#include "common.h" + +# ifndef __ASSEMBLER__ +extern void __iomem *prcm_mpu_base; +# endif + #define OMAP4430_PRCM_MPU_BASE 0x48243000 #define OMAP44XX_PRCM_MPU_REGADDR(inst, reg) \ @@ -98,6 +104,7 @@ extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx); extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx); extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu); # endif #endif diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h index 6ac9661..638da6d 100644 --- a/arch/arm/mach-omap2/prm-regbits-24xx.h +++ b/arch/arm/mach-omap2/prm-regbits-24xx.h @@ -14,7 +14,7 @@ * published by the Free Software Foundation. */ -#include "prm2xxx_3xxx.h" +#include "prm2xxx.h" /* Bits shared between registers */ @@ -209,9 +209,13 @@ /* RM_RSTST_WKUP specific bits */ /* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */ +#define OMAP24XX_EXTWMPU_RST_SHIFT 6 #define OMAP24XX_EXTWMPU_RST_MASK (1 << 6) +#define OMAP24XX_SECU_WD_RST_SHIFT 5 #define OMAP24XX_SECU_WD_RST_MASK (1 << 5) +#define OMAP24XX_MPU_WD_RST_SHIFT 4 #define OMAP24XX_MPU_WD_RST_MASK (1 << 4) +#define OMAP24XX_SECU_VIOL_RST_SHIFT 3 #define OMAP24XX_SECU_VIOL_RST_MASK (1 << 3) /* PM_WKEN_WKUP specific bits */ diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 64c087a..838b594 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -14,7 +14,7 @@ #define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H -#include "prm2xxx_3xxx.h" +#include "prm3xxx.h" /* Shared register bits */ @@ -509,15 +509,25 @@ #define OMAP3430_RSTTIME1_MASK (0xff << 0) /* PRM_RSTST */ +#define OMAP3430_ICECRUSHER_RST_SHIFT 10 #define OMAP3430_ICECRUSHER_RST_MASK (1 << 10) +#define OMAP3430_ICEPICK_RST_SHIFT 9 #define OMAP3430_ICEPICK_RST_MASK (1 << 9) +#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT 8 #define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK (1 << 8) +#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT 7 #define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK (1 << 7) +#define OMAP3430_EXTERNAL_WARM_RST_SHIFT 6 #define OMAP3430_EXTERNAL_WARM_RST_MASK (1 << 6) +#define OMAP3430_SECURE_WD_RST_SHIFT 5 #define OMAP3430_SECURE_WD_RST_MASK (1 << 5) +#define OMAP3430_MPU_WD_RST_SHIFT 4 #define OMAP3430_MPU_WD_RST_MASK (1 << 4) +#define OMAP3430_SECURITY_VIOL_RST_SHIFT 3 #define OMAP3430_SECURITY_VIOL_RST_MASK (1 << 3) +#define OMAP3430_GLOBAL_SW_RST_SHIFT 1 #define OMAP3430_GLOBAL_SW_RST_MASK (1 << 1) +#define OMAP3430_GLOBAL_COLD_RST_SHIFT 0 #define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0) /* PRM_VOLTCTRL */ diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 39d5621..a1a266c 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -1,7 +1,7 @@ /* * OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * * Paul Walmsley @@ -15,6 +15,28 @@ #include "prcm-common.h" +# ifndef __ASSEMBLER__ +extern void __iomem *prm_base; +extern void omap2_set_globals_prm(void __iomem *prm); +# endif + + +/* + * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP + * module to softreset + */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 + +/* + * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP + * submodule to exit hardreset + */ +#define MAX_MODULE_HARDRESET_WAIT 10000 + +/* + * Register bitfields + */ + /* * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP * @@ -52,5 +74,58 @@ #define OMAP_POWERSTATE_SHIFT 0 #define OMAP_POWERSTATE_MASK (0x3 << 0) +/* + * Standardized OMAP reset source bits + * + * To the extent these happen to match the hardware register bit + * shifts, it's purely coincidental. Used by omap-wdt.c. + * OMAP_UNKNOWN_RST_SRC_ID_SHIFT is a special value, used whenever + * there are any bits remaining in the global PRM_RSTST register that + * haven't been identified, or when the PRM code for the current SoC + * doesn't know how to interpret the register. + */ +#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0 +#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1 +#define OMAP_SECU_VIOL_RST_SRC_ID_SHIFT 2 +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 +#define OMAP_SECU_WD_RST_SRC_ID_SHIFT 4 +#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5 +#define OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT 6 +#define OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT 7 +#define OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT 8 +#define OMAP_ICEPICK_RST_SRC_ID_SHIFT 9 +#define OMAP_ICECRUSHER_RST_SRC_ID_SHIFT 10 +#define OMAP_C2C_RST_SRC_ID_SHIFT 11 +#define OMAP_UNKNOWN_RST_SRC_ID_SHIFT 12 + +#ifndef __ASSEMBLER__ + +/** + * struct prm_reset_src_map - map register bitshifts to standard bitshifts + * @reg_shift: bitshift in the PRM reset source register + * @std_shift: bitshift equivalent in the standard reset source list + * + * The fields are signed because -1 is used as a terminator. + */ +struct prm_reset_src_map { + s8 reg_shift; + s8 std_shift; +}; + +/** + * struct prm_ll_data - fn ptrs to per-SoC PRM function implementations + * @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl + */ +struct prm_ll_data { + u32 (*read_reset_sources)(void); +}; + +extern int prm_register(struct prm_ll_data *pld); +extern int prm_unregister(struct prm_ll_data *pld); + +extern u32 prm_read_reset_sources(void); + +#endif + #endif diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c new file mode 100644 index 0000000..bf24fc4 --- /dev/null +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -0,0 +1,139 @@ +/* + * OMAP2xxx PRM module functions + * + * Copyright (C) 2010-2012 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * Benoît Cousson + * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> + +#include "common.h" +#include <plat/cpu.h> + +#include "vp.h" +#include "powerdomain.h" +#include "clockdomain.h" +#include "prm2xxx.h" +#include "cm2xxx_3xxx.h" +#include "prm-regbits-24xx.h" + +/* + * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP + * hardware register (which are specific to the OMAP2xxx SoCs) to + * reset source ID bit shifts (which is an OMAP SoC-independent + * enumeration) + */ +static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = { + { OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, + { OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, + { OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, + { OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, + { OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT }, + { OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, + { -1, -1 }, +}; + +/** + * omap2xxx_prm_read_reset_sources - return the last SoC reset source + * + * Return a u32 representing the last reset sources of the SoC. The + * returned reset source bits are standardized across OMAP SoCs. + */ +static u32 omap2xxx_prm_read_reset_sources(void) +{ + struct prm_reset_src_map *p; + u32 r = 0; + u32 v; + + v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST); + + p = omap2xxx_prm_reset_src_map; + while (p->reg_shift >= 0 && p->std_shift >= 0) { + if (v & (1 << p->reg_shift)) + r |= 1 << p->std_shift; + p++; + } + + return r; +} + +/** + * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC + * + * Set the DPLL reset bit, which should reboot the SoC. This is the + * recommended way to restart the SoC. No return value. + */ +void omap2xxx_prm_dpll_reset(void) +{ + omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD, + OMAP2_RM_RSTCTRL); + /* OCP barrier */ + omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL); +} + +int omap2xxx_clkdm_sleep(struct clockdomain *clkdm) +{ + omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, + clkdm->pwrdm.ptr->prcm_offs, + OMAP2_PM_PWSTCTRL); + return 0; +} + +int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm) +{ + omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, + clkdm->pwrdm.ptr->prcm_offs, + OMAP2_PM_PWSTCTRL); + return 0; +} + +struct pwrdm_ops omap2_pwrdm_operations = { + .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, + .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, + .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, + .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, + .pwrdm_wait_transition = omap2_pwrdm_wait_transition, +}; + +/* + * + */ + +static struct prm_ll_data omap2xxx_prm_ll_data = { + .read_reset_sources = &omap2xxx_prm_read_reset_sources, +}; + +static int __init omap2xxx_prm_init(void) +{ + if (!cpu_is_omap24xx()) + return 0; + + return prm_register(&omap2xxx_prm_ll_data); +} +subsys_initcall(omap2xxx_prm_init); + +static void __exit omap2xxx_prm_exit(void) +{ + if (!cpu_is_omap24xx()) + return; + + /* Should never happen */ + WARN(prm_unregister(&omap2xxx_prm_ll_data), + "%s: prm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap2xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h new file mode 100644 index 0000000..fe8a14f --- /dev/null +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -0,0 +1,134 @@ +/* + * OMAP2xxx Power/Reset Management (PRM) register definitions + * + * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The PRM hardware modules on the OMAP2/3 are quite similar to each + * other. The PRM on OMAP4 has a new register layout, and is handled + * in a separate file. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H +#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H + +#include "prcm-common.h" +#include "prm.h" +#include "prm2xxx_3xxx.h" + +#define OMAP2420_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) +#define OMAP2430_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) + +/* + * OMAP2-specific global PRM registers + * Use __raw_{read,write}l() with these registers. + * + * With a few exceptions, these are the register names beginning with + * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE + * bits.) + * + */ + +#define OMAP2_PRCM_REVISION_OFFSET 0x0000 +#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 +#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 +#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2_PRCM_VOLTST_OFFSET 0x0054 +#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 +#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078 +#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080 +#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 +#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 +#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 +#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 +#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098) + +#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000) +#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010) + +#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c) + +#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050) +#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054) +#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060) +#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070) +#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078) +#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080) +#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084) +#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090) +#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094) +#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098) + +/* + * Module specific PRM register offsets from PRM_BASE + domain offset + * + * Use prm_{read,write}_mod_reg() with these registers. + * + * With a few exceptions, these are the register names beginning with + * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the + * IRQSTATUS and IRQENABLE bits.) + */ + +/* Register offsets appearing on both OMAP2 and OMAP3 */ + +#define OMAP2_RM_RSTCTRL 0x0050 +#define OMAP2_RM_RSTTIME 0x0054 +#define OMAP2_RM_RSTST 0x0058 +#define OMAP2_PM_PWSTCTRL 0x00e0 +#define OMAP2_PM_PWSTST 0x00e4 + +#define PM_WKEN 0x00a0 +#define PM_WKEN1 PM_WKEN +#define PM_WKST 0x00b0 +#define PM_WKST1 PM_WKST +#define PM_WKDEP 0x00c8 +#define PM_EVGENCTRL 0x00d4 +#define PM_EVGENONTIM 0x00d8 +#define PM_EVGENOFFTIM 0x00dc + +/* OMAP2xxx specific register offsets */ +#define OMAP24XX_PM_WKEN2 0x00a4 +#define OMAP24XX_PM_WKST2 0x00b4 + +#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ +#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ +#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 +#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc + +#ifndef __ASSEMBLER__ +/* Function prototypes */ +extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); +extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); + +extern void omap2xxx_prm_dpll_reset(void); + +extern int __init prm2xxx_init(void); +extern int __exit prm2xxx_exit(void); + +#endif + +#endif diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9529984..30517f5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,82 +15,12 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/irq.h> -#include <plat/prcm.h> - -#include "soc.h" #include "common.h" -#include "vp.h" - +#include "powerdomain.h" #include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" #include "prm-regbits-24xx.h" -#include "prm-regbits-34xx.h" - -static const struct omap_prcm_irq omap3_prcm_irqs[] = { - OMAP_PRCM_IRQ("wkup", 0, 0), - OMAP_PRCM_IRQ("io", 9, 1), -}; - -static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { - .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, - .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET, - .nr_regs = 1, - .irqs = omap3_prcm_irqs, - .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), - .irq = 11 + OMAP_INTC_START, - .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, - .ocp_barrier = &omap3xxx_prm_ocp_barrier, - .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, - .restore_irqen = &omap3xxx_prm_restore_irqen, -}; - -u32 omap2_prm_read_mod_reg(s16 module, u16 idx) -{ - return __raw_readl(prm_base + module + idx); -} - -void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) -{ - __raw_writel(val, prm_base + module + idx); -} - -/* Read-modify-write a register in a PRM module. Caller must lock */ -u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) -{ - u32 v; - - v = omap2_prm_read_mod_reg(module, idx); - v &= ~mask; - v |= bits; - omap2_prm_write_mod_reg(v, module, idx); - - return v; -} - -/* Read a PRM register, AND it, and shift the result down to bit 0 */ -u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) -{ - u32 v; - - v = omap2_prm_read_mod_reg(domain, idx); - v &= mask; - v >>= __ffs(mask); - - return v; -} - -u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx); -} - -u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx); -} - +#include "clockdomain.h" /** * omap2_prm_is_hardreset_asserted - read the HW reset line state of @@ -104,9 +34,6 @@ u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) */ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) { - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, (1 << shift)); } @@ -127,9 +54,6 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) { u32 mask; - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - mask = 1 << shift; omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL); @@ -156,9 +80,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) u32 rst, st; int c; - if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) - return -EINVAL; - rst = 1 << rst_shift; st = 1 << st_shift; @@ -178,188 +99,155 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; } -/* PRM VP */ - -/* - * struct omap3_vp - OMAP3 VP register access description. - * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg - */ -struct omap3_vp { - u32 tranxdone_status; -}; - -static struct omap3_vp omap3_vp[] = { - [OMAP3_VP_VDD_MPU_ID] = { - .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, - }, - [OMAP3_VP_VDD_CORE_ID] = { - .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, - }, -}; - -#define MAX_VP_ID ARRAY_SIZE(omap3_vp); - -u32 omap3_prm_vp_check_txdone(u8 vp_id) -{ - struct omap3_vp *vp = &omap3_vp[vp_id]; - u32 irqstatus; - irqstatus = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - return irqstatus & vp->tranxdone_status; -} +/* Powerdomain low-level functions */ -void omap3_prm_vp_clear_txdone(u8 vp_id) +/* Common functions across OMAP2 and OMAP3 */ +int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) { - struct omap3_vp *vp = &omap3_vp[vp_id]; - - omap2_prm_write_mod_reg(vp->tranxdone_status, - OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); + return 0; } -u32 omap3_prm_vcvp_read(u8 offset) +int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) { - return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL, + OMAP_POWERSTATE_MASK); } -void omap3_prm_vcvp_write(u32 val, u8 offset) +int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm) { - omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTST, + OMAP_POWERSTATEST_MASK); } -u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) { - return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); + u32 m; + + m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); + + omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL); + + return 0; } -/** - * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events - * @events: ptr to a u32, preallocated by caller - * - * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM - * MPU IRQs, and store the result into the u32 pointed to by @events. - * No return value. - */ -void omap3xxx_prm_read_pending_irqs(unsigned long *events) +int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) { - u32 mask, st; + u32 m; + + m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */ - mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL); - events[0] = mask & st; + return 0; } -/** - * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete - * - * Force any buffered writes to the PRM IP block to complete. Needed - * by the PRM IRQ handler, which reads and writes directly to the IP - * block, to avoid race conditions after acknowledging or clearing IRQ - * bits. No return value. - */ -void omap3xxx_prm_ocp_barrier(void) +int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) { - omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); + u32 m; + + m = omap2_pwrdm_get_mem_bank_stst_mask(bank); + + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST, + m); } -/** - * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg - * @saved_mask: ptr to a u32 array to save IRQENABLE bits - * - * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask - * must be allocated by the caller. Intended to be used in the PRM - * interrupt handler suspend callback. The OCP barrier is needed to - * ensure the write to disable PRM interrupts reaches the PRM before - * returning; otherwise, spurious interrupts might occur. No return - * value. - */ -void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) +int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) { - saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQENABLE_MPU_OFFSET); - omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + u32 m; + + m = omap2_pwrdm_get_mem_bank_retst_mask(bank); - /* OCP barrier */ - omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL, m); } -/** - * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args - * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously - * - * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended - * to be used in the PRM interrupt handler resume callback to restore - * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP - * barrier should be needed here; any pending PRM interrupts will fire - * once the writes reach the PRM. No return value. - */ -void omap3xxx_prm_restore_irqen(u32 *saved_mask) +int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) { - omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, - OMAP3_PRM_IRQENABLE_MPU_OFFSET); + u32 v; + + v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK); + omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL); + + return 0; } -/** - * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain - * - * Clear any previously-latched I/O wakeup events and ensure that the - * I/O wakeup gates are aligned with the current mux settings. Works - * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then - * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No - * return value. - */ -void omap3xxx_prm_reconfigure_io_chain(void) +int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm) { - int i = 0; + u32 c = 0; - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ - omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & - OMAP3430_ST_IO_CHAIN_MASK, - MAX_IOPAD_LATCH_TIME, i); - if (i == MAX_IOPAD_LATCH_TIME) - pr_warn("PRM: I/O chain clock line assertion timed out\n"); + /* XXX Is this udelay() value meaningful? */ + while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) & + OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; + } - omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, - PM_WKST); + pr_debug("powerdomain: completed transition in %d loops\n", c); - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); + return 0; } -/** - * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches - * - * Activates the I/O wakeup event latches and allows events logged by - * those latches to signal a wakeup event to the PRCM. For I/O - * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux - * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. - * No return value. - */ -static void __init omap3xxx_prm_enable_io_wakeup(void) +int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); + return 0; +} + +int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit), + clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); + return 0; +} + +int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { - if (omap3_has_io_wakeup()) - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, - PM_WKEN); + return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, + PM_WKDEP, (1 << clkdm2->dep_bit)); } -static int __init omap3xxx_prcm_init(void) +int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) { - int ret = 0; - - if (cpu_is_omap34xx()) { - omap3xxx_prm_enable_io_wakeup(); - ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - if (!ret) - irq_set_status_flags(omap_prcm_event_to_irq("io"), - IRQ_NOAUTOEN); + struct clkdm_dep *cd; + u32 mask = 0; + + for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { + if (!cd->clkdm) + continue; /* only happens if data is erroneous */ + + /* PRM accesses are slow, so minimize them */ + mask |= 1 << cd->clkdm->dep_bit; + atomic_set(&cd->wkdep_usecount, 0); } - return ret; + omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, + PM_WKDEP); + return 0; } -subsys_initcall(omap3xxx_prcm_init); + diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index c19d249..78532d6 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -1,7 +1,7 @@ /* - * OMAP2/3 Power/Reset Management (PRM) register definitions + * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions * - * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * @@ -19,160 +19,6 @@ #include "prcm-common.h" #include "prm.h" -#define OMAP2420_PRM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) -#define OMAP2430_PRM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) -#define OMAP34XX_PRM_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) - - -/* - * OMAP2-specific global PRM registers - * Use __raw_{read,write}l() with these registers. - * - * With a few exceptions, these are the register names beginning with - * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE - * bits.) - * - */ - -#define OMAP2_PRCM_REVISION_OFFSET 0x0000 -#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) -#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 -#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) - -#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018 -#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c -#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) - -#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 -#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) -#define OMAP2_PRCM_VOLTST_OFFSET 0x0054 -#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) -#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 -#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) -#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 -#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070) -#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078 -#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078) -#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080 -#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) -#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 -#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) -#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 -#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) -#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 -#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) -#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 -#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098) - -#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000) -#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010) - -#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c) - -#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050) -#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054) -#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060) -#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070) -#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078) -#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080) -#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084) -#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090) -#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094) -#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098) - -/* - * OMAP3-specific global PRM registers - * Use __raw_{read,write}l() with these registers. - * - * With a few exceptions, these are the register names beginning with - * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE - * bits.) - */ - -#define OMAP3_PRM_REVISION_OFFSET 0x0004 -#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004) -#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014 -#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014) - -#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018 -#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018) -#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c -#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c) - - -#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020 -#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) -#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024 -#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) -#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028 -#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) -#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c -#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) -#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030 -#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) -#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034 -#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) -#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038 -#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) -#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c -#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) -#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050 -#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) -#define OMAP3_PRM_RSTTIME_OFFSET 0x0054 -#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) -#define OMAP3_PRM_RSTST_OFFSET 0x0058 -#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) -#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060 -#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) -#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064 -#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) -#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070 -#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) -#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090 -#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) -#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094 -#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) -#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098 -#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) -#define OMAP3_PRM_POLCTRL_OFFSET 0x009c -#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) -#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0 -#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) -#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0 -#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) -#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4 -#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) -#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8 -#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) -#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc -#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) -#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0 -#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) -#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4 -#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) -#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0 -#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) -#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4 -#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) -#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8 -#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) -#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc -#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) -#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0 -#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) -#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4 -#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) - -#define OMAP3_PRM_CLKSEL_OFFSET 0x0040 -#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) -#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070 -#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) - /* * Module specific PRM register offsets from PRM_BASE + domain offset * @@ -200,66 +46,83 @@ #define PM_EVGENONTIM 0x00d8 #define PM_EVGENOFFTIM 0x00dc -/* OMAP2xxx specific register offsets */ -#define OMAP24XX_PM_WKEN2 0x00a4 -#define OMAP24XX_PM_WKST2 0x00b4 - -#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */ -#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */ -#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 -#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc -/* OMAP3 specific register offsets */ -#define OMAP3430ES2_PM_WKEN3 0x00f0 -#define OMAP3430ES2_PM_WKST3 0x00b8 - -#define OMAP3430_PM_MPUGRPSEL 0x00a4 -#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL -#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8 - -#define OMAP3430_PM_IVAGRPSEL 0x00a8 -#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL -#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4 - -#define OMAP3430_PM_PREPWSTST 0x00e8 - -#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8 -#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#include "powerdomain.h" -#ifndef __ASSEMBLER__ /* Power/reset management domain register get/set */ -extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); -extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx); -extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); -extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx); -extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx); -extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask); +static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) +{ + return __raw_readl(prm_base + module + idx); +} + +static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + __raw_writel(val, prm_base + module + idx); +} + +/* Read-modify-write a register in a PRM module. Caller must lock */ +static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, + s16 idx) +{ + u32 v; + + v = omap2_prm_read_mod_reg(module, idx); + v &= ~mask; + v |= bits; + omap2_prm_write_mod_reg(v, module, idx); + + return v; +} + +/* Read a PRM register, AND it, and shift the result down to bit 0 */ +static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + u32 v; + + v = omap2_prm_read_mod_reg(domain, idx); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx); +} + +static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx); +} /* These omap2_ PRM functions apply to both OMAP2 and 3 */ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); -/* OMAP3-specific VP functions */ -u32 omap3_prm_vp_check_txdone(u8 vp_id); -void omap3_prm_vp_clear_txdone(u8 vp_id); - -/* - * OMAP3 access functions for voltage controller (VC) and - * voltage proccessor (VP) in the PRM. - */ -extern u32 omap3_prm_vcvp_read(u8 offset); -extern void omap3_prm_vcvp_write(u32 val, u8 offset); -extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); - -extern void omap3xxx_prm_reconfigure_io_chain(void); - -/* PRM interrupt-related functions */ -extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); -extern void omap3xxx_prm_ocp_barrier(void); -extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); -extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); +extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); +extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm); +extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm); +extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst); +extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst); +extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank); +extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank); +extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst); +extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm); + +extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2); +extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2); +extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2); +extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm); #endif /* __ASSEMBLER */ @@ -348,7 +211,9 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); * * 3430: RM_RSTST_CORE, RM_RSTST_EMU */ +#define OMAP_GLOBALWARM_RST_SHIFT 1 #define OMAP_GLOBALWARM_RST_MASK (1 << 1) +#define OMAP_GLOBALCOLD_RST_SHIFT 0 #define OMAP_GLOBALCOLD_RST_MASK (1 << 0) /* @@ -376,11 +241,4 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); #define OMAP_LOGICRETSTATE_MASK (1 << 2) -/* - * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP - * submodule to exit hardreset - */ -#define MAX_MODULE_HARDRESET_WAIT 10000 - - #endif diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index e7dbb6c..1ac7388 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,9 +19,8 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/common.h> - #include "common.h" +#include "powerdomain.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" @@ -133,3 +132,204 @@ int am33xx_prm_deassert_hardreset(u8 shift, s16 inst, return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; } + +static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= OMAP_POWERSTATE_MASK; + v >>= OMAP_POWERSTATE_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= OMAP_POWERSTATEST_MASK; + v >>= OMAP_POWERSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LASTPOWERSTATEENTERED_MASK; + v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT; + + return v; +} + +static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK, + (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + return 0; +} + +static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK, + AM33XX_LASTPOWERSTATEENTERED_MASK, + pwrdm->prcm_offs, pwrdm->pwrstst_offs); + return 0; +} + +static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + u32 m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= AM33XX_LOGICSTATEST_MASK; + v >>= AM33XX_LOGICSTATEST_SHIFT; + + return v; +} + +static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm) +{ + u32 v, m; + + m = pwrdm->logicretstate_mask; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_on_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = pwrdm->mem_ret_mask[bank]; + if (!m) + return -EINVAL; + + am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + + return 0; +} + +static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_pwrst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = pwrdm->mem_retst_mask[bank]; + if (!m) + return -EINVAL; + + v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs) + & OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; + } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + + return 0; +} + +struct pwrdm_ops am33xx_pwrdm_operations = { + .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst, + .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst, + .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst, + .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst, + .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange, + .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst, + .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst, + .pwrdm_wait_transition = am33xx_pwrdm_wait_transition, +}; diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c new file mode 100644 index 0000000..b86116c --- /dev/null +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -0,0 +1,417 @@ +/* + * OMAP3xxx PRM module functions + * + * Copyright (C) 2010-2012 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * Benoît Cousson + * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> + +#include "common.h" +#include <plat/cpu.h> + +#include "vp.h" +#include "powerdomain.h" +#include "prm3xxx.h" +#include "prm2xxx_3xxx.h" +#include "cm2xxx_3xxx.h" +#include "prm-regbits-34xx.h" + +static const struct omap_prcm_irq omap3_prcm_irqs[] = { + OMAP_PRCM_IRQ("wkup", 0, 0), + OMAP_PRCM_IRQ("io", 9, 1), +}; + +static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { + .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, + .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET, + .nr_regs = 1, + .irqs = omap3_prcm_irqs, + .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs), + .irq = 11 + OMAP_INTC_START, + .read_pending_irqs = &omap3xxx_prm_read_pending_irqs, + .ocp_barrier = &omap3xxx_prm_ocp_barrier, + .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, + .restore_irqen = &omap3xxx_prm_restore_irqen, +}; + +/* + * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware + * register (which are specific to OMAP3xxx SoCs) to reset source ID + * bit shifts (which is an OMAP SoC-independent enumeration) + */ +static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = { + { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, + { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, + { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, + { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, + { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, + { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, + { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT, + OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT }, + { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT, + OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT }, + { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT }, + { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT }, + { -1, -1 }, +}; + +/* PRM VP */ + +/* + * struct omap3_vp - OMAP3 VP register access description. + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + */ +struct omap3_vp { + u32 tranxdone_status; +}; + +static struct omap3_vp omap3_vp[] = { + [OMAP3_VP_VDD_MPU_ID] = { + .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, + }, + [OMAP3_VP_VDD_CORE_ID] = { + .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, + }, +}; + +#define MAX_VP_ID ARRAY_SIZE(omap3_vp); + +u32 omap3_prm_vp_check_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + u32 irqstatus; + + irqstatus = omap2_prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + return irqstatus & vp->tranxdone_status; +} + +void omap3_prm_vp_clear_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + + omap2_prm_write_mod_reg(vp->tranxdone_status, + OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); +} + +u32 omap3_prm_vcvp_read(u8 offset) +{ + return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); +} + +void omap3_prm_vcvp_write(u32 val, u8 offset) +{ + omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); +} + +u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +{ + return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); +} + +/** + * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC + * + * Set the DPLL3 reset bit, which should reboot the SoC. This is the + * recommended way to restart the SoC, considering Errata i520. No + * return value. + */ +void omap3xxx_prm_dpll3_reset(void) +{ + omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD, + OMAP2_RM_RSTCTRL); + /* OCP barrier */ + omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL); +} + +/** + * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events + * @events: ptr to a u32, preallocated by caller + * + * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM + * MPU IRQs, and store the result into the u32 pointed to by @events. + * No return value. + */ +void omap3xxx_prm_read_pending_irqs(unsigned long *events) +{ + u32 mask, st; + + /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */ + mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + events[0] = mask & st; +} + +/** + * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete + * + * Force any buffered writes to the PRM IP block to complete. Needed + * by the PRM IRQ handler, which reads and writes directly to the IP + * block, to avoid race conditions after acknowledging or clearing IRQ + * bits. No return value. + */ +void omap3xxx_prm_ocp_barrier(void) +{ + omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); +} + +/** + * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg + * @saved_mask: ptr to a u32 array to save IRQENABLE bits + * + * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask + * must be allocated by the caller. Intended to be used in the PRM + * interrupt handler suspend callback. The OCP barrier is needed to + * ensure the write to disable PRM interrupts reaches the PRM before + * returning; otherwise, spurious interrupts might occur. No return + * value. + */ +void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) +{ + saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQENABLE_MPU_OFFSET); + omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + + /* OCP barrier */ + omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); +} + +/** + * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args + * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously + * + * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended + * to be used in the PRM interrupt handler resume callback to restore + * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP + * barrier should be needed here; any pending PRM interrupts will fire + * once the writes reach the PRM. No return value. + */ +void omap3xxx_prm_restore_irqen(u32 *saved_mask) +{ + omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, + OMAP3_PRM_IRQENABLE_MPU_OFFSET); +} + +/** + * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. Works + * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then + * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No + * return value. + */ +void omap3xxx_prm_reconfigure_io_chain(void) +{ + int i = 0; + + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN_MASK, + MAX_IOPAD_LATCH_TIME, i); + if (i == MAX_IOPAD_LATCH_TIME) + pr_warn("PRM: I/O chain clock line assertion timed out\n"); + + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + + omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, + PM_WKST); + + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST); +} + +/** + * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O + * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux + * registers, and omap3xxx_prm_reconfigure_io_chain() must be called. + * No return value. + */ +static void __init omap3xxx_prm_enable_io_wakeup(void) +{ + if (omap3_has_io_wakeup()) + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, + PM_WKEN); +} + +/** + * omap3xxx_prm_read_reset_sources - return the last SoC reset source + * + * Return a u32 representing the last reset sources of the SoC. The + * returned reset source bits are standardized across OMAP SoCs. + */ +static u32 omap3xxx_prm_read_reset_sources(void) +{ + struct prm_reset_src_map *p; + u32 r = 0; + u32 v; + + v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST); + + p = omap3xxx_prm_reset_src_map; + while (p->reg_shift >= 0 && p->std_shift >= 0) { + if (v & (1 << p->reg_shift)) + r |= 1 << p->std_shift; + p++; + } + + return r; +} + +/* Powerdomain low-level functions */ + +/* Applicable only for OMAP3. Not supported on OMAP2 */ +static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP3430_PM_PREPWSTST, + OMAP3430_LASTPOWERSTATEENTERED_MASK); +} + +static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTST, + OMAP3430_LOGICSTATEST_MASK); +} + +static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL, + OMAP3430_LOGICSTATEST_MASK); +} + +static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP3430_PM_PREPWSTST, + OMAP3430_LASTLOGICSTATEENTERED_MASK); +} + +static int omap3_get_mem_bank_lastmemst_mask(u8 bank) +{ + switch (bank) { + case 0: + return OMAP3430_LASTMEM1STATEENTERED_MASK; + case 1: + return OMAP3430_LASTMEM2STATEENTERED_MASK; + case 2: + return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK; + case 3: + return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK; + default: + WARN_ON(1); /* should never happen */ + return -EEXIST; + } + return 0; +} + +static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m; + + m = omap3_get_mem_bank_lastmemst_mask(bank); + + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP3430_PM_PREPWSTST, m); +} + +static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST); + return 0; +} + +static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm) +{ + return omap2_prm_rmw_mod_reg_bits(0, + 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, + pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); +} + +static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) +{ + return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, + 0, pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL); +} + +struct pwrdm_ops omap3_pwrdm_operations = { + .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst, + .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst, + .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst, + .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst, + .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, + .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, + .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst, + .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst, + .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar, + .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar, + .pwrdm_wait_transition = omap2_pwrdm_wait_transition, +}; + +/* + * + */ + +static struct prm_ll_data omap3xxx_prm_ll_data = { + .read_reset_sources = &omap3xxx_prm_read_reset_sources, +}; + +static int __init omap3xxx_prm_init(void) +{ + int ret; + + if (!cpu_is_omap34xx()) + return 0; + + ret = prm_register(&omap3xxx_prm_ll_data); + if (ret) + return ret; + + omap3xxx_prm_enable_io_wakeup(); + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + + + return ret; +} +subsys_initcall(omap3xxx_prm_init); + +static void __exit omap3xxx_prm_exit(void) +{ + if (!cpu_is_omap34xx()) + return; + + /* Should never happen */ + WARN(prm_unregister(&omap3xxx_prm_ll_data), + "%s: prm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap3xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h new file mode 100644 index 0000000..10cd41a --- /dev/null +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -0,0 +1,162 @@ +/* + * OMAP3xxx Power/Reset Management (PRM) register definitions + * + * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The PRM hardware modules on the OMAP2/3 are quite similar to each + * other. The PRM on OMAP4 has a new register layout, and is handled + * in a separate file. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_PRM3XXX_H +#define __ARCH_ARM_MACH_OMAP2_PRM3XXX_H + +#include "prcm-common.h" +#include "prm.h" +#include "prm2xxx_3xxx.h" + +#define OMAP34XX_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) + + +/* + * OMAP3-specific global PRM registers + * Use __raw_{read,write}l() with these registers. + * + * With a few exceptions, these are the register names beginning with + * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE + * bits.) + */ + +#define OMAP3_PRM_REVISION_OFFSET 0x0004 +#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004) +#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014 +#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014) + +#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018 +#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018) +#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c +#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c) + + +#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020 +#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020) +#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024 +#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024) +#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028 +#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028) +#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c +#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c) +#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030 +#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030) +#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034 +#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034) +#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038 +#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038) +#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c +#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c) +#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050 +#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050) +#define OMAP3_PRM_RSTTIME_OFFSET 0x0054 +#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054) +#define OMAP3_PRM_RSTST_OFFSET 0x0058 +#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058) +#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060 +#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060) +#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064 +#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064) +#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070) +#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090 +#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090) +#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094 +#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094) +#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098 +#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098) +#define OMAP3_PRM_POLCTRL_OFFSET 0x009c +#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c) +#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0 +#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0) +#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0 +#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0) +#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4 +#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4) +#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8 +#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8) +#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc +#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc) +#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0 +#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0) +#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4 +#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4) +#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0 +#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0) +#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4 +#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4) +#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8 +#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8) +#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc +#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc) +#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0 +#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0) +#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4 +#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4) + +#define OMAP3_PRM_CLKSEL_OFFSET 0x0040 +#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040) +#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070 +#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070) + +/* OMAP3 specific register offsets */ +#define OMAP3430ES2_PM_WKEN3 0x00f0 +#define OMAP3430ES2_PM_WKST3 0x00b8 + +#define OMAP3430_PM_MPUGRPSEL 0x00a4 +#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL +#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8 + +#define OMAP3430_PM_IVAGRPSEL 0x00a8 +#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL +#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4 + +#define OMAP3430_PM_PREPWSTST 0x00e8 + +#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8 +#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc + + +#ifndef __ASSEMBLER__ + +/* OMAP3-specific VP functions */ +u32 omap3_prm_vp_check_txdone(u8 vp_id); +void omap3_prm_vp_clear_txdone(u8 vp_id); + +/* + * OMAP3 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap3_prm_vcvp_read(u8 offset); +extern void omap3_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); + +extern void omap3xxx_prm_reconfigure_io_chain(void); + +/* PRM interrupt-related functions */ +extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); +extern void omap3xxx_prm_ocp_barrier(void); +extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); +extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); + +extern void omap3xxx_prm_dpll3_reset(void); + +extern u32 omap3xxx_prm_get_reset_sources(void); + +#endif /* __ASSEMBLER */ + + +#endif diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index f0c4d5f..6d3467a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -1,10 +1,11 @@ /* * OMAP4 PRM module functions * - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011-2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,7 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/prcm.h> #include "soc.h" #include "iomap.h" @@ -27,6 +27,9 @@ #include "prm-regbits-44xx.h" #include "prcm44xx.h" #include "prminst44xx.h" +#include "powerdomain.h" + +/* Static data */ static const struct omap_prcm_irq omap4_prcm_irqs[] = { OMAP_PRCM_IRQ("wkup", 0, 0), @@ -46,6 +49,33 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .restore_irqen = &omap44xx_prm_restore_irqen, }; +/* + * omap44xx_prm_reset_src_map - map from bits in the PRM_RSTST + * hardware register (which are specific to OMAP44xx SoCs) to reset + * source ID bit shifts (which is an OMAP SoC-independent + * enumeration) + */ +static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { + { OMAP4430_RST_GLOBAL_WARM_SW_SHIFT, + OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, + { OMAP4430_RST_GLOBAL_COLD_SW_SHIFT, + OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, + { OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT, + OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, + { OMAP4430_MPU_WDT_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, + { OMAP4430_SECURE_WDT_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT }, + { OMAP4430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, + { OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT, + OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT }, + { OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT, + OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT }, + { OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT, + OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT }, + { OMAP4430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT }, + { OMAP4430_C2C_RST_SHIFT, OMAP_C2C_RST_SRC_ID_SHIFT }, + { -1, -1 }, +}; + /* PRM low-level functions */ /* Read a register in a CM/PRM instance in the PRM module */ @@ -291,12 +321,324 @@ static void __init omap44xx_prm_enable_io_wakeup(void) OMAP4_PRM_IO_PMCTRL_OFFSET); } -static int __init omap4xxx_prcm_init(void) +/** + * omap44xx_prm_read_reset_sources - return the last SoC reset source + * + * Return a u32 representing the last reset sources of the SoC. The + * returned reset source bits are standardized across OMAP SoCs. + */ +static u32 omap44xx_prm_read_reset_sources(void) +{ + struct prm_reset_src_map *p; + u32 r = 0; + u32 v; + + v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + OMAP4_RM_RSTST); + + p = omap44xx_prm_reset_src_map; + while (p->reg_shift >= 0 && p->std_shift >= 0) { + if (v & (1 << p->reg_shift)) + r |= 1 << p->std_shift; + p++; + } + + return r; +} + +/* Powerdomain low-level functions */ + +static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_partition, + pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL); + return 0; +} + +static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + v &= OMAP_POWERSTATE_MASK; + v >>= OMAP_POWERSTATE_SHIFT; + + return v; +} + +static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTST); + v &= OMAP_POWERSTATEST_MASK; + v >>= OMAP_POWERSTATEST_SHIFT; + + return v; +} + +static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTST); + v &= OMAP4430_LASTPOWERSTATEENTERED_MASK; + v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT; + + return v; +} + +static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) +{ + omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK, + (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT), + pwrdm->prcm_partition, + pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL); + return 0; +} + +static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm) +{ + omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK, + OMAP4430_LASTPOWERSTATEENTERED_MASK, + pwrdm->prcm_partition, + pwrdm->prcm_offs, OMAP4_PM_PWSTST); + return 0; +} + +static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) +{ + u32 v; + + v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK); + omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v, + pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + + return 0; +} + +static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); + + omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + + return 0; +} + +static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, + u8 pwrst) +{ + u32 m; + + m = omap2_pwrdm_get_mem_bank_retst_mask(bank); + + omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)), + pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + + return 0; +} + +static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTST); + v &= OMAP4430_LOGICSTATEST_MASK; + v >>= OMAP4430_LOGICSTATEST_SHIFT; + + return v; +} + +static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm) { - if (cpu_is_omap44xx()) { - omap44xx_prm_enable_io_wakeup(); - return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); + u32 v; + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + v &= OMAP4430_LOGICRETSTATE_MASK; + v >>= OMAP4430_LOGICRETSTATE_SHIFT; + + return v; +} + +/** + * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate + * @pwrdm: struct powerdomain * to read the state for + * + * Reads the previous logic powerstate for a powerdomain. This + * function must determine the previous logic powerstate by first + * checking the previous powerstate for the domain. If that was OFF, + * then logic has been lost. If previous state was RETENTION, the + * function reads the setting for the next retention logic state to + * see the actual value. In every other case, the logic is + * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET + * depending whether the logic was retained or not. + */ +static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) +{ + int state; + + state = omap4_pwrdm_read_prev_pwrst(pwrdm); + + if (state == PWRDM_POWER_OFF) + return PWRDM_POWER_OFF; + + if (state != PWRDM_POWER_RET) + return PWRDM_POWER_RET; + + return omap4_pwrdm_read_logic_retst(pwrdm); +} + +static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = omap2_pwrdm_get_mem_bank_stst_mask(bank); + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTST); + v &= m; + v >>= __ffs(m); + + return v; +} + +static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) +{ + u32 m, v; + + m = omap2_pwrdm_get_mem_bank_retst_mask(bank); + + v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs, + OMAP4_PM_PWSTCTRL); + v &= m; + v >>= __ffs(m); + + return v; +} + +/** + * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate + * @pwrdm: struct powerdomain * to read mem powerstate for + * @bank: memory bank index + * + * Reads the previous memory powerstate for a powerdomain. This + * function must determine the previous memory powerstate by first + * checking the previous powerstate for the domain. If that was OFF, + * then logic has been lost. If previous state was RETENTION, the + * function reads the setting for the next memory retention state to + * see the actual value. In every other case, the logic is + * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET + * depending whether logic was retained or not. + */ +static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) +{ + int state; + + state = omap4_pwrdm_read_prev_pwrst(pwrdm); + + if (state == PWRDM_POWER_OFF) + return PWRDM_POWER_OFF; + + if (state != PWRDM_POWER_RET) + return PWRDM_POWER_RET; + + return omap4_pwrdm_read_mem_retst(pwrdm, bank); +} + +static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm) +{ + u32 c = 0; + + /* + * REVISIT: pwrdm_wait_transition() may be better implemented + * via a callback and a periodic timer check -- how long do we expect + * powerdomain transitions to take? + */ + + /* XXX Is this udelay() value meaningful? */ + while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition, + pwrdm->prcm_offs, + OMAP4_PM_PWSTST) & + OMAP_INTRANSITION_MASK) && + (c++ < PWRDM_TRANSITION_BAILOUT)) + udelay(1); + + if (c > PWRDM_TRANSITION_BAILOUT) { + pr_err("powerdomain: %s: waited too long to complete transition\n", + pwrdm->name); + return -EAGAIN; } + + pr_debug("powerdomain: completed transition in %d loops\n", c); + return 0; } -subsys_initcall(omap4xxx_prcm_init); + +struct pwrdm_ops omap4_pwrdm_operations = { + .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst, + .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst, + .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange, + .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst, + .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst, + .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst, + .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst, + .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst, + .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst, + .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst, + .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst, + .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst, + .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst, + .pwrdm_wait_transition = omap4_pwrdm_wait_transition, +}; + +/* + * XXX document + */ +static struct prm_ll_data omap44xx_prm_ll_data = { + .read_reset_sources = &omap44xx_prm_read_reset_sources, +}; + +static int __init omap44xx_prm_init(void) +{ + int ret; + + if (!cpu_is_omap44xx()) + return 0; + + ret = prm_register(&omap44xx_prm_ll_data); + if (ret) + return ret; + + omap44xx_prm_enable_io_wakeup(); + + return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); +} +subsys_initcall(omap44xx_prm_init); + +static void __exit omap44xx_prm_exit(void) +{ + if (!cpu_is_omap44xx()) + return; + + /* Should never happen */ + WARN(prm_unregister(&omap44xx_prm_ll_data), + "%s: prm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap44xx_prm_exit); diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index ee72ae6..c8e1acc 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -771,6 +771,8 @@ extern void omap44xx_prm_ocp_barrier(void); extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); extern void omap44xx_prm_restore_irqen(u32 *saved_mask); +extern u32 omap44xx_prm_get_reset_sources(void); + # endif #endif diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 6b4d332..f596e1e 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,11 +24,11 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include <plat/common.h> -#include <plat/prcm.h> - #include "prm2xxx_3xxx.h" +#include "prm2xxx.h" +#include "prm3xxx.h" #include "prm44xx.h" +#include "common.h" /* * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs @@ -53,6 +53,16 @@ static struct irq_chip_generic **prcm_irq_chips; */ static struct omap_prcm_irq_setup *prcm_irq_setup; +/* prm_base: base virtual address of the PRM IP block */ +void __iomem *prm_base; + +/* + * prm_ll_data: function pointers to SoC-specific implementations of + * common PRM functions + */ +static struct prm_ll_data null_prm_ll_data; +static struct prm_ll_data *prm_ll_data = &null_prm_ll_data; + /* Private functions */ /* @@ -319,64 +329,82 @@ err: return -ENOMEM; } -/* - * Stubbed functions so that common files continue to build when - * custom builds are used - * XXX These are temporary and should be removed at the earliest possible - * opportunity +/** + * omap2_set_globals_prm - set the PRM base address (for early use) + * @prm: PRM base virtual address + * + * XXX Will be replaced when the PRM/CM drivers are completed. */ -u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx) +void __init omap2_set_globals_prm(void __iomem *prm) { - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; + prm_base = prm; } -void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +/** + * prm_read_reset_sources - return the sources of the SoC's last reset + * + * Return a u32 bitmask representing the reset sources that caused the + * SoC to reset. The low-level per-SoC functions called by this + * function remap the SoC-specific reset source bits into an + * OMAP-common set of reset source bits, defined in + * arch/arm/mach-omap2/prm.h. Returns the standardized reset source + * u32 bitmask from the hardware upon success, or returns (1 << + * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources() + * function was registered. + */ +u32 prm_read_reset_sources(void) { - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); -} + u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT; -u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, - s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; -} + if (prm_ll_data->read_reset_sources) + ret = prm_ll_data->read_reset_sources(); + else + WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__); -u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; + return ret; } -u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +/** + * prm_register - register per-SoC low-level data with the PRM + * @pld: low-level per-SoC OMAP PRM data & function pointers to register + * + * Register per-SoC low-level OMAP PRM data and function pointers with + * the OMAP PRM common interface. The caller must keep the data + * pointed to by @pld valid until it calls prm_unregister() and + * it returns successfully. Returns 0 upon success, -EINVAL if @pld + * is NULL, or -EEXIST if prm_register() has already been called + * without an intervening prm_unregister(). + */ +int prm_register(struct prm_ll_data *pld) { - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; -} + if (!pld) + return -EINVAL; -u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; -} + if (prm_ll_data != &null_prm_ll_data) + return -EEXIST; -int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); - return 0; -} + prm_ll_data = pld; -int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) -{ - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); return 0; } -int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, - u8 st_shift) +/** + * prm_unregister - unregister per-SoC low-level data & function pointers + * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister + * + * Unregister per-SoC low-level OMAP PRM data and function pointers + * that were previously registered with prm_register(). The + * caller may not destroy any of the data pointed to by @pld until + * this function returns successfully. Returns 0 upon success, or + * -EINVAL if @pld is NULL or if @pld does not match the struct + * prm_ll_data * previously registered by prm_register(). + */ +int prm_unregister(struct prm_ll_data *pld) { - WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n"); + if (!pld || prm_ll_data != pld) + return -EINVAL; + + prm_ll_data = &null_prm_ll_data; + return 0; } - diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index 46f2efb..a2ede2d 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h @@ -30,4 +30,6 @@ extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, u16 rstctrl_offs); +extern void omap_prm_base_init(void); + #endif diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h index 8bfaf34..1ee58c2 100644 --- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h +++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM #define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM -#include <plat/sdrc.h> +#include "sdrc.h" /* Hynix H8MBX00U0MER-0EM */ static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h index a391b49..85cccc0 100644 --- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#include <plat/sdrc.h> +#include "sdrc.h" /* Micron MT46H32M32LF-6 */ /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c index 845c4fd..0fa7ffa 100644 --- a/arch/arm/mach-omap2/sdram-nokia.c +++ b/arch/arm/mach-omap2/sdram-nokia.c @@ -18,10 +18,8 @@ #include <linux/io.h> #include "common.h" -#include <plat/clock.h> -#include <plat/sdrc.h> - #include "sdram-nokia.h" +#include "sdrc.h" /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */ struct sdram_timings { diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h index cd43529..003f7bf 100644 --- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h +++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h @@ -11,7 +11,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM #define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM -#include <plat/sdrc.h> +#include "sdrc.h" /* Numonyx M65KXXXXAM */ static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h index 0e518a7..8dc3de5 100644 --- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#include <plat/sdrc.h> +#include "sdrc.h" /* Qimonda HYB18M512160AF-6 */ static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index e3d345f..dae7e48 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -24,10 +24,7 @@ #include <linux/io.h> #include "common.h" -#include <plat/clock.h> -#include <plat/sram.h> - -#include <plat/sdrc.h> +#include "clock.h" #include "sdrc.h" static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; @@ -115,12 +112,10 @@ int omap2_sdrc_get_params(unsigned long r, } -void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) +void __init omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms) { - if (omap2_globals->sdrc) - omap2_sdrc_base = omap2_globals->sdrc; - if (omap2_globals->sms) - omap2_sms_base = omap2_globals->sms; + omap2_sdrc_base = sdrc; + omap2_sms_base = sms; } /** @@ -160,19 +155,3 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } - -void omap2_sms_write_rot_control(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_CONTROL(ctx)); -} - -void omap2_sms_write_rot_size(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_SIZE(ctx)); -} - -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) -{ - sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); -} - diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index b3f8379..446aa13 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -2,12 +2,14 @@ #define __ARCH_ARM_MACH_OMAP2_SDRC_H /* - * OMAP2 SDRC register definitions + * OMAP2/3 SDRC/SMS macros and prototypes * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc. + * Copyright (C) 2007-2008 Nokia Corporation * - * Written by Paul Walmsley + * Paul Walmsley + * Tony Lindgren + * Richard Woodruff * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,8 +17,6 @@ */ #undef DEBUG -#include <plat/sdrc.h> - #ifndef __ASSEMBLER__ #include <linux/io.h> @@ -50,6 +50,60 @@ static inline u32 sms_read_reg(u16 reg) { return __raw_readl(OMAP_SMS_REGADDR(reg)); } + +extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms); + + +/** + * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate + * @rate: SDRC clock rate (in Hz) + * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate + * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate + * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate + * @mr: Value to program to SDRC_MR for this rate + * + * This structure holds a pre-computed set of register values for the + * SDRC for a given SDRC clock rate and SDRAM chip. These are + * intended to be pre-computed and specified in an array in the board-*.c + * files. The structure is keyed off the 'rate' field. + */ +struct omap_sdrc_params { + unsigned long rate; + u32 actim_ctrla; + u32 actim_ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + +#ifdef CONFIG_SOC_HAS_OMAP2_SDRC +void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +#else +static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) {}; +#endif + +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); +void omap2_sms_save_context(void); +void omap2_sms_restore_context(void); + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); +struct omap_sdrc_params *rx51_get_sdram_timings(void); + +u32 omap2xxx_sdrc_dll_is_unlocked(void); +u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); + + #else #define OMAP242X_SDRC_REGADDR(reg) \ OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) @@ -57,6 +111,7 @@ static inline u32 sms_read_reg(u16 reg) OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) #define OMAP34XX_SDRC_REGADDR(reg) \ OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) + #endif /* __ASSEMBLER__ */ /* Minimum frequency that the SDRC DLL can lock at */ @@ -74,4 +129,85 @@ static inline u32 sms_read_reg(u16 reg) */ #define SDRC_MPURATE_LOOPS 96 +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_CS_CFG 0x040 +#define SDRC_SHARING 0x044 +#define SDRC_ERR_TYPE 0x04C +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MCFG_0 0x080 +#define SDRC_MR_0 0x084 +#define SDRC_EMR2_0 0x08c +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 +#define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MANUAL_0 0x0a8 +#define SDRC_MCFG_1 0x0B0 +#define SDRC_MR_1 0x0B4 +#define SDRC_EMR2_1 0x0BC +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 +#define SDRC_MANUAL_1 0x0D8 + +#define SDRC_POWER_AUTOCOUNT_SHIFT 8 +#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) +#define SDRC_POWER_CLKCTRL_SHIFT 4 +#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) +#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + +#define OMAP242X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) \ + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + + + #endif diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 73e55e4..9072917 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,16 +24,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/sdrc.h> - #include "soc.h" #include "iomap.h" #include "common.h" -#include "prm2xxx_3xxx.h" +#include "prm2xxx.h" #include "clock.h" #include "sdrc.h" +#include "sram.h" /* Memory timing, DLL mode flags */ #define M_DDR 1 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index a507cd6..aa30a3c 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -28,19 +28,20 @@ #include <linux/console.h> #include <plat/omap-serial.h> -#include "common.h" -#include <plat/dma.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> -#include <plat/serial.h> +#include <plat-omap/dma-omap.h> +#include "common.h" +#include "omap_hwmod.h" +#include "omap_device.h" +#include "omap-pm.h" +#include "soc.h" #include "prm2xxx_3xxx.h" #include "pm.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-34xx.h" #include "control.h" #include "mux.h" +#include "serial.h" /* * NOTE: By default the serial auto_suspend timeout is disabled as it causes diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h new file mode 100644 index 0000000..c4014f0 --- /dev/null +++ b/arch/arm/mach-omap2/serial.h @@ -0,0 +1 @@ +#include <mach/serial.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 5069879..d1dedc8 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,13 +26,12 @@ #include <asm/assembler.h> -#include <plat/sram.h> - #include "omap34xx.h" #include "iomap.h" -#include "cm2xxx_3xxx.h" -#include "prm2xxx_3xxx.h" +#include "cm3xxx.h" +#include "prm3xxx.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index fc9b96d..f31d907 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -1,7 +1,469 @@ -#include <plat/cpu.h> +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + #include "omap24xx.h" #include "omap34xx.h" #include "omap44xx.h" #include "ti81xx.h" #include "am33xx.h" #include "omap54xx.h" + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP2 +#undef OMAP_NAME + +#ifdef CONFIG_SOC_OMAP2420 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2420 +# endif +#endif +#ifdef CONFIG_SOC_OMAP2430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2430 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP3 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap3 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP4 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap4 +# endif +#endif + +#ifdef CONFIG_SOC_OMAP5 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap5 +# endif +#endif + +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + +/* + * Omap device type i.e. EMU/HS/TST/GP/BAD + */ +#define OMAP2_DEVICE_TYPE_TEST 0 +#define OMAP2_DEVICE_TYPE_EMU 1 +#define OMAP2_DEVICE_TYPE_SEC 2 +#define OMAP2_DEVICE_TYPE_GP 3 +#define OMAP2_DEVICE_TYPE_BAD 4 + +int omap_type(void); + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * cpu_is_omap243x(): True for OMAP2430 + * cpu_is_omap343x(): True for OMAP3430 + * cpu_is_omap443x(): True for OMAP4430 + * cpu_is_omap446x(): True for OMAP4460 + * cpu_is_omap447x(): True for OMAP4470 + * soc_is_omap543x(): True for OMAP5430, OMAP5432 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_AM_CLASS(class, id) \ +static inline int is_am ##class (void) \ +{ \ + return (GET_AM_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) + +#define IS_TI_CLASS(class, id) \ +static inline int is_ti ##class (void) \ +{ \ + return (GET_TI_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +#define IS_TI_SUBCLASS(subclass, id) \ +static inline int is_ti ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +#define IS_AM_SUBCLASS(subclass, id) \ +static inline int is_am ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(24xx, 0x24) +IS_OMAP_CLASS(34xx, 0x34) +IS_OMAP_CLASS(44xx, 0x44) +IS_AM_CLASS(35xx, 0x35) +IS_OMAP_CLASS(54xx, 0x54) +IS_AM_CLASS(33xx, 0x33) + +IS_TI_CLASS(81xx, 0x81) + +IS_OMAP_SUBCLASS(242x, 0x242) +IS_OMAP_SUBCLASS(243x, 0x243) +IS_OMAP_SUBCLASS(343x, 0x343) +IS_OMAP_SUBCLASS(363x, 0x363) +IS_OMAP_SUBCLASS(443x, 0x443) +IS_OMAP_SUBCLASS(446x, 0x446) +IS_OMAP_SUBCLASS(447x, 0x447) +IS_OMAP_SUBCLASS(543x, 0x543) + +IS_TI_SUBCLASS(816x, 0x816) +IS_TI_SUBCLASS(814x, 0x814) +IS_AM_SUBCLASS(335x, 0x335) + +#define cpu_is_omap24xx() 0 +#define cpu_is_omap242x() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap343x() 0 +#define cpu_is_ti81xx() 0 +#define cpu_is_ti816x() 0 +#define cpu_is_ti814x() 0 +#define soc_is_am35xx() 0 +#define soc_is_am33xx() 0 +#define soc_is_am335x() 0 +#define cpu_is_omap44xx() 0 +#define cpu_is_omap443x() 0 +#define cpu_is_omap446x() 0 +#define cpu_is_omap447x() 0 +#define soc_is_omap54xx() 0 +#define soc_is_omap543x() 0 + +#if defined(MULTI_OMAP2) +# if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() is_omap24xx() +# endif +# if defined (CONFIG_SOC_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() is_omap242x() +# endif +# if defined (CONFIG_SOC_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() is_omap243x() +# endif +# if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap34xx +# undef cpu_is_omap343x +# define cpu_is_omap34xx() is_omap34xx() +# define cpu_is_omap343x() is_omap343x() +# endif +#else +# if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() 1 +# endif +# if defined(CONFIG_SOC_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() 1 +# endif +# if defined(CONFIG_SOC_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap34xx +# define cpu_is_omap34xx() 1 +# endif +# if defined(CONFIG_SOC_OMAP3430) +# undef cpu_is_omap343x +# define cpu_is_omap343x() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap2420(): True for OMAP2420 + * cpu_is_omap2422(): True for OMAP2422 + * cpu_is_omap2423(): True for OMAP2423 + * cpu_is_omap2430(): True for OMAP2430 + * cpu_is_omap3430(): True for OMAP3430 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(2420, 0x2420) +IS_OMAP_TYPE(2422, 0x2422) +IS_OMAP_TYPE(2423, 0x2423) +IS_OMAP_TYPE(2430, 0x2430) +IS_OMAP_TYPE(3430, 0x3430) + +#define cpu_is_omap2420() 0 +#define cpu_is_omap2422() 0 +#define cpu_is_omap2423() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap3430() 0 +#define cpu_is_omap3630() 0 +#define soc_is_omap5430() 0 + +/* These are needed for the common code */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 +#define cpu_class_is_omap1() 0 +#define cpu_class_is_omap2() 1 +#endif + +#if defined(CONFIG_ARCH_OMAP2) +# undef cpu_is_omap2420 +# undef cpu_is_omap2422 +# undef cpu_is_omap2423 +# undef cpu_is_omap2430 +# define cpu_is_omap2420() is_omap2420() +# define cpu_is_omap2422() is_omap2422() +# define cpu_is_omap2423() is_omap2423() +# define cpu_is_omap2430() is_omap2430() +#endif + +#if defined(CONFIG_ARCH_OMAP3) +# undef cpu_is_omap3430 +# undef cpu_is_ti81xx +# undef cpu_is_ti816x +# undef cpu_is_ti814x +# undef soc_is_am35xx +# define cpu_is_omap3430() is_omap3430() +# undef cpu_is_omap3630 +# define cpu_is_omap3630() is_omap363x() +# define cpu_is_ti81xx() is_ti81xx() +# define cpu_is_ti816x() is_ti816x() +# define cpu_is_ti814x() is_ti814x() +# define soc_is_am35xx() is_am35xx() +#endif + +# if defined(CONFIG_SOC_AM33XX) +# undef soc_is_am33xx +# undef soc_is_am335x +# define soc_is_am33xx() is_am33xx() +# define soc_is_am335x() is_am335x() +#endif + +# if defined(CONFIG_ARCH_OMAP4) +# undef cpu_is_omap44xx +# undef cpu_is_omap443x +# undef cpu_is_omap446x +# undef cpu_is_omap447x +# define cpu_is_omap44xx() is_omap44xx() +# define cpu_is_omap443x() is_omap443x() +# define cpu_is_omap446x() is_omap446x() +# define cpu_is_omap447x() is_omap447x() +# endif + +# if defined(CONFIG_SOC_OMAP5) +# undef soc_is_omap54xx +# undef soc_is_omap543x +# define soc_is_omap54xx() is_omap54xx() +# define soc_is_omap543x() is_omap543x() +#endif + +/* Various silicon revisions for omap2 */ +#define OMAP242X_CLASS 0x24200024 +#define OMAP2420_REV_ES1_0 OMAP242X_CLASS +#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) + +#define OMAP243X_CLASS 0x24300024 +#define OMAP2430_REV_ES1_0 OMAP243X_CLASS + +#define OMAP343X_CLASS 0x34300034 +#define OMAP3430_REV_ES1_0 OMAP343X_CLASS +#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) +#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) +#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) +#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) +#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) + +#define OMAP363X_CLASS 0x36300034 +#define OMAP3630_REV_ES1_0 OMAP363X_CLASS +#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) +#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) + +#define TI816X_CLASS 0x81600034 +#define TI8168_REV_ES1_0 TI816X_CLASS +#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) + +#define TI814X_CLASS 0x81400034 +#define TI8148_REV_ES1_0 TI814X_CLASS +#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) +#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) + +#define AM35XX_CLASS 0x35170034 +#define AM35XX_REV_ES1_0 AM35XX_CLASS +#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) + +#define AM335X_CLASS 0x33500033 +#define AM335X_REV_ES1_0 AM335X_CLASS + +#define OMAP443X_CLASS 0x44300044 +#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) +#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) +#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) +#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) +#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) + +#define OMAP446X_CLASS 0x44600044 +#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) +#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8)) + +#define OMAP447X_CLASS 0x44700044 +#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) + +#define OMAP54XX_CLASS 0x54000054 +#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) + +void omap2xxx_check_revision(void); +void omap3xxx_check_revision(void); +void omap4xxx_check_revision(void); +void omap5xxx_check_revision(void); +void omap3xxx_check_features(void); +void ti81xx_check_features(void); +void omap4xxx_check_features(void); + +/* + * Runtime detection of OMAP3 features + * + * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip + * family have OS-level control over the I/O chain clock. This is + * to avoid a window during which wakeups could potentially be lost + * during powerdomain transitions. If this bit is set, it + * indicates that the chip does support OS-level control of this + * feature. + */ +extern u32 omap_features; + +#define OMAP3_HAS_L2CACHE BIT(0) +#define OMAP3_HAS_IVA BIT(1) +#define OMAP3_HAS_SGX BIT(2) +#define OMAP3_HAS_NEON BIT(3) +#define OMAP3_HAS_ISP BIT(4) +#define OMAP3_HAS_192MHZ_CLK BIT(5) +#define OMAP3_HAS_IO_WAKEUP BIT(6) +#define OMAP3_HAS_SDRC BIT(7) +#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) +#define OMAP4_HAS_PERF_SILICON BIT(9) + + +#define OMAP3_HAS_FEATURE(feat,flag) \ +static inline unsigned int omap3_has_ ##feat(void) \ +{ \ + return omap_features & OMAP3_HAS_ ##flag; \ +} \ + +OMAP3_HAS_FEATURE(l2cache, L2CACHE) +OMAP3_HAS_FEATURE(sgx, SGX) +OMAP3_HAS_FEATURE(iva, IVA) +OMAP3_HAS_FEATURE(neon, NEON) +OMAP3_HAS_FEATURE(isp, ISP) +OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) +OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) +OMAP3_HAS_FEATURE(sdrc, SDRC) +OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) + +/* + * Runtime detection of OMAP4 features + */ +#define OMAP4_HAS_FEATURE(feat, flag) \ +static inline unsigned int omap4_has_ ##feat(void) \ +{ \ + return omap_features & OMAP4_HAS_ ##flag; \ +} \ + +OMAP4_HAS_FEATURE(perf_silicon, PERF_SILICON) + +#endif /* __ASSEMBLY__ */ + diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index f8217a5..b0e77a4 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -23,8 +23,8 @@ #include <linux/slab.h> #include <linux/io.h> -#include <plat/omap_device.h> - +#include "soc.h" +#include "omap_device.h" #include "voltage.h" #include "control.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c new file mode 100644 index 0000000..0ff0f06 --- /dev/null +++ b/arch/arm/mach-omap2/sram.c @@ -0,0 +1,305 @@ +/* + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "iomap.h" +#include "prm2xxx_3xxx.h" +#include "sdrc.h" +#include "sram.h" + +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA +#else +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#endif +#define OMAP5_SRAM_PA 0x40300000 + +#define SRAM_BOOTLOADER_SZ 0x00 + +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) + +#define GP_DEVICE 0x300 + +#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) + +static unsigned long omap_sram_start; +static unsigned long omap_sram_skip; +static unsigned long omap_sram_size; + +/* + * Depending on the target RAMFS firewall setup, the public usable amount of + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This + * functionality seems ok until some nice security API happens. + */ +static int is_sram_locked(void) +{ + if (OMAP2_DEVICE_TYPE_GP == omap_type()) { + /* RAMFW: R/W access to all initiators for all qualifier sets */ + if (cpu_is_omap242x()) { + __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + } + if (cpu_is_omap34xx()) { + __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); + __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + } + return 0; + } else + return 1; /* assume locked with no PPA or security driver */ +} + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_sram(void) +{ + omap_sram_skip = SRAM_BOOTLOADER_SZ; + if (is_sram_locked()) { + if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PUB_PA; + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; + } else { + omap_sram_size = 0x8000; /* 32K */ + } + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PUB_PA; + omap_sram_size = 0x800; /* 2K */ + } + } else { + if (soc_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PA; + omap_sram_size = 0xe000; /* 56K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PA; + if (cpu_is_omap242x()) + omap_sram_size = 0xa0000; /* 640K */ + else if (cpu_is_omap243x()) + omap_sram_size = 0x10000; /* 64K */ + } + } +} + +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +static void __init omap2_map_sram(void) +{ + int cached = 1; + +#ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { + omap_sram_start += PAGE_SIZE; + omap_sram_size -= SZ_16K; + } +#endif + if (cpu_is_omap34xx()) { + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + cached = 0; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, cached); +} + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + BUG_ON(!_omap2_sram_ddr_init); + _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + BUG_ON(!_omap2_sram_reprogram_sdrc); + _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + BUG_ON(!_omap2_set_prcm); + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +#ifdef CONFIG_SOC_OMAP2420 +static int __init omap242x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, + omap242x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, + omap242x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, + omap242x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap242x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static int __init omap243x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, + omap243x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, + omap243x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, + omap243x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap243x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 + +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) +{ + BUG_ON(!_omap3_sram_configure_core_dpll); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); +} + +void omap3_sram_restore_context(void) +{ + omap_sram_reset(); + + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); + omap_push_sram_idle(); +} + +static inline int omap34xx_sram_init(void) +{ + omap3_sram_restore_context(); + return 0; +} +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +static inline int am33xx_sram_init(void) +{ + return 0; +} + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap2_map_sram(); + + if (cpu_is_omap242x()) + omap242x_sram_init(); + else if (cpu_is_omap2430()) + omap243x_sram_init(); + else if (soc_is_am33xx()) + am33xx_sram_init(); + else if (cpu_is_omap34xx()) + omap34xx_sram_init(); + + return 0; +} diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h new file mode 100644 index 0000000..ca7277c --- /dev/null +++ b/arch/arm/mach-omap2/sram.h @@ -0,0 +1,83 @@ +/* + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASSEMBLY__ +#include <plat/sram.h> + +extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern void omap3_sram_restore_context(void); + +/* Do not use these */ +extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap24xx_sram_reprogram_clock_sz; + +extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap242x_sram_ddr_init_sz; + +extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap242x_sram_set_prcm_sz; + +extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap242x_sram_reprogram_sdrc_sz; + + +extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap243x_sram_ddr_init_sz; + +extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap243x_sram_set_prcm_sz; + +extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern unsigned long omap3_sram_configure_core_dpll_sz; + +#ifdef CONFIG_PM +extern void omap_push_sram_idle(void); +#else +static inline void omap_push_sram_idle(void) {} +#endif /* CONFIG_PM */ + +#endif /* __ASSEMBLY__ */ + +/* + * OMAP2+: define the SRAM PA addresses. + * Used by the SRAM management code and the idle sleep code. + */ +#define OMAP2_SRAM_PA 0x40200000 +#define OMAP3_SRAM_PA 0x40200000 +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PA 0x40304000 +#define OMAP4_SRAM_VA 0xfe404000 +#else +#define OMAP4_SRAM_PA 0x40300000 +#endif +#define AM33XX_SRAM_PA 0x40300000 diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 8f7326c..680a7c5 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -34,8 +34,8 @@ #include "soc.h" #include "iomap.h" -#include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" +#include "prm2xxx.h" +#include "cm2xxx.h" #include "sdrc.h" .text diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index b140d65..a1e9edd 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -34,8 +34,8 @@ #include "soc.h" #include "iomap.h" -#include "prm2xxx_3xxx.h" -#include "cm2xxx_3xxx.h" +#include "prm2xxx.h" +#include "cm2xxx.h" #include "sdrc.h" .text diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 2d0ceaa..1446331 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -32,7 +32,7 @@ #include "soc.h" #include "iomap.h" #include "sdrc.h" -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" /* * This file needs be built unconditionally as ARM to interoperate correctly diff --git a/arch/arm/mach-omap2/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h index 8f9843f..a1e6caf 100644 --- a/arch/arm/mach-omap2/ti81xx.h +++ b/arch/arm/mach-omap2/ti81xx.h @@ -22,6 +22,15 @@ #define TI81XX_CTRL_BASE TI81XX_SCM_BASE #define TI81XX_PRCM_BASE 0x48180000 +/* + * Adjust TAP register base such that omap3_check_revision accesses the correct + * TI81XX register for checking device ID (it adds 0x204 to tap base while + * TI81XX DEVICE ID register is at offset 0x600 from control base). + */ +#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \ + TI81XX_CONTROL_DEVICE_ID - 0x204) + + #define TI81XX_ARM_INTC_BASE 0x48200000 #endif /* __ASM_ARCH_TI81XX_H */ diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 69e4663..7016637 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -37,16 +37,21 @@ #include <linux/clockchips.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> #include <asm/sched_clock.h> #include <asm/arch_timer.h> -#include <plat/omap_hwmod.h> -#include <plat/omap_device.h> +#include "omap_hwmod.h" +#include "omap_device.h" +#include <plat/counter-32k.h> #include <plat/dmtimer.h> -#include <plat/omap-pm.h> +#include "omap-pm.h" #include "soc.h" #include "common.h" @@ -61,18 +66,6 @@ #define OMAP3_32K_SOURCE "omap_32k_fck" #define OMAP4_32K_SOURCE "sys_32k_ck" -#ifdef CONFIG_OMAP_32K_TIMER -#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE -#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE -#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE -#define OMAP3_SECURE_TIMER 12 -#else -#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE -#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE -#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE -#define OMAP3_SECURE_TIMER 1 -#endif - #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 @@ -103,7 +96,7 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST, - 0xffffffff - cycles, 1); + 0xffffffff - cycles, OMAP_TIMER_POSTED); return 0; } @@ -113,7 +106,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - __omap_dm_timer_stop(&clkev, 1, clkev.rate); + __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -121,10 +114,10 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, period -= 1; /* Looks like we need to first set the load value separately */ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -144,36 +137,144 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +static struct property device_disabled = { + .name = "status", + .length = sizeof("disabled"), + .value = "disabled", +}; + +static struct of_device_id omap_timer_match[] __initdata = { + { .compatible = "ti,omap2-timer", }, + { } +}; + +/** + * omap_get_timer_dt - get a timer using device-tree + * @match - device-tree match structure for matching a device type + * @property - optional timer property to match + * + * Helper function to get a timer during early boot using device-tree for use + * as kernel system timer. Optionally, the property argument can be used to + * select a timer with a specific property. Once a timer is found then mark + * the timer node in device-tree as disabled, to prevent the kernel from + * registering this timer as a platform device and so no one else can use it. + */ +static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, + const char *property) +{ + struct device_node *np; + + for_each_matching_node(np, match) { + if (!of_device_is_available(np)) { + of_node_put(np); + continue; + } + + if (property && !of_get_property(np, property, NULL)) { + of_node_put(np); + continue; + } + + prom_add_property(np, &device_disabled); + return np; + } + + return NULL; +} + +/** + * omap_dmtimer_init - initialisation function when device tree is used + * + * For secure OMAP3 devices, timers with device type "timer-secure" cannot + * be used by the kernel as they are reserved. Therefore, to prevent the + * kernel registering these devices remove them dynamically from the device + * tree on boot. + */ +void __init omap_dmtimer_init(void) +{ + struct device_node *np; + + if (!cpu_is_omap34xx()) + return; + + /* If we are a secure device, remove any secure timer nodes */ + if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { + np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); + if (np) + of_node_put(np); + } +} + +/** + * omap_dm_timer_get_errata - get errata flags for a timer + * + * Get the timer errata flags that are specific to the OMAP device being used. + */ +u32 __init omap_dm_timer_get_errata(void) +{ + if (cpu_is_omap24xx()) + return 0; + + return OMAP_TIMER_ERRATA_I103_I767; +} + static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + const char *oh_name; + struct device_node *np; struct omap_hwmod *oh; - struct resource irq_rsrc, mem_rsrc; - size_t size; - int res = 0; - int r; - - sprintf(name, "timer%d", gptimer_id); - omap_hwmod_setup_one(name); - oh = omap_hwmod_lookup(name); + struct resource irq, mem; + int r = 0; + + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_timer_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + + timer->irq = irq_of_parse_and_map(np, 0); + if (!timer->irq) + return -ENXIO; + + timer->io_base = of_iomap(np, 0); + + of_node_put(np); + } else { + if (omap_dm_timer_reserve_systimer(gptimer_id)) + return -ENODEV; + + sprintf(name, "timer%d", gptimer_id); + oh_name = name; + } + + oh = omap_hwmod_lookup(oh_name); if (!oh) return -ENODEV; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc); - if (r) - return -ENXIO; - timer->irq = irq_rsrc.start; + if (!of_have_populated_dt()) { + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, + &irq); + if (r) + return -ENXIO; + timer->irq = irq.start; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc); - if (r) - return -ENXIO; - timer->phys_base = mem_rsrc.start; - size = mem_rsrc.end - mem_rsrc.start; + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, + &mem); + if (r) + return -ENXIO; + + /* Static mapping, never released */ + timer->io_base = ioremap(mem.start, mem.end - mem.start); + } - /* Static mapping, never released */ - timer->io_base = ioremap(timer->phys_base, size); if (!timer->io_base) return -ENXIO; @@ -182,42 +283,56 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(timer->fclk)) return -ENODEV; - omap_hwmod_enable(oh); - - if (omap_dm_timer_reserve_systimer(gptimer_id)) - return -ENODEV; - + /* FIXME: Need to remove hard-coded test on timer ID */ if (gptimer_id != 12) { struct clk *src; src = clk_get(NULL, fck_source); if (IS_ERR(src)) { - res = -EINVAL; + r = -EINVAL; } else { - res = __omap_dm_timer_set_source(timer->fclk, src); - if (IS_ERR_VALUE(res)) - pr_warning("%s: timer%i cannot set source\n", - __func__, gptimer_id); + r = clk_set_parent(timer->fclk, src); + if (IS_ERR_VALUE(r)) + pr_warn("%s: %s cannot set source\n", + __func__, oh->name); clk_put(src); } } + + omap_hwmod_setup_one(oh_name); + omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); - __omap_dm_timer_reset(timer, 1, 1); - timer->posted = 1; - timer->rate = clk_get_rate(timer->fclk); + if (posted) + __omap_dm_timer_enable_posted(timer); + + /* Check that the intended posted configuration matches the actual */ + if (posted != timer->posted) + return -EINVAL; + timer->rate = clk_get_rate(timer->fclk); timer->reserved = 1; - return res; + return r; } static void __init omap2_gp_clockevent_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + clkev.errata = omap_dm_timer_get_errata(); + + /* + * For clock-event timers we never read the timer counter and + * so we are not impacted by errata i103 and i767. Therefore, + * we can safely ignore this errata for clock-event timers. + */ + __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); + + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, + OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -250,7 +365,8 @@ static bool use_gptimer_clksrc; */ static cycle_t clocksource_read_cycles(struct clocksource *cs) { - return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); + return (cycle_t)__omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); } static struct clocksource clocksource_gpt = { @@ -264,21 +380,41 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(&clksrc, 1); + return __omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); return 0; } -#ifdef CONFIG_OMAP_32K_TIMER +static struct of_device_id omap_counter_match[] __initdata = { + { .compatible = "ti,omap-counter32k", }, + { } +}; + /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { int ret; + struct device_node *np = NULL; struct omap_hwmod *oh; void __iomem *vbase; const char *oh_name = "counter_32k"; /* + * If device-tree is present, then search the DT blob + * to see if the 32kHz counter is supported. + */ + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_counter_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + } + + /* * First check hwmod data is available for sync32k counter */ oh = omap_hwmod_lookup(oh_name); @@ -287,7 +423,13 @@ static int __init omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - vbase = omap_hwmod_get_mpu_rt_va(oh); + if (np) { + vbase = of_iomap(np, 0); + of_node_put(np); + } else { + vbase = omap_hwmod_get_mpu_rt_va(oh); + } + if (!vbase) { pr_warn("%s: failed to get counter_32k resource\n", __func__); return -ENXIO; @@ -309,23 +451,21 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } -#else -static inline int omap2_sync32k_clocksource_init(void) -{ - return -ENODEV; -} -#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) { int res; - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + clksrc.errata = omap_dm_timer_get_errata(); + + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + OMAP_TIMER_NONPOSTED); BUG_ON(res); __omap_dm_timer_load_start(&clksrc, - OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, + OMAP_TIMER_NONPOSTED); setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) @@ -336,25 +476,6 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, gptimer_id, clksrc.rate); } -static void __init omap2_clocksource_init(int gptimer_id, - const char *fck_source) -{ - /* - * First give preference to kernel parameter configuration - * by user (clocksource="gp_timer"). - * - * In case of missing kernel parameter for clocksource, - * first check for availability for 32k-sync timer, in case - * of failure in finding 32k_counter module or registering - * it as clocksource, execution will fallback to gp-timer. - */ - if (use_gptimer_clksrc == true) - omap2_gptimer_clocksource_init(gptimer_id, fck_source); - else if (omap2_sync32k_clocksource_init()) - /* Fall back to gp-timer code */ - omap2_gptimer_clocksource_init(gptimer_id, fck_source); -} - #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER /* * The realtime counter also called master counter, is a free-running @@ -433,48 +554,65 @@ static inline void __init realtime_counter_init(void) {} #endif -#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ +#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ + clksrc_nr, clksrc_src) \ +static void __init omap##name##_gptimer_timer_init(void) \ +{ \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ +} + +#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ clksrc_nr, clksrc_src) \ -static void __init omap##name##_timer_init(void) \ +static void __init omap##name##_sync32k_timer_init(void) \ { \ - omap2_gp_clockevent_init((clkev_nr), clkev_src); \ - omap2_clocksource_init((clksrc_nr), clksrc_src); \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ + /* Enable the use of clocksource="gp_timer" kernel parameter */ \ + if (use_gptimer_clksrc) \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\ + else \ + omap2_sync32k_clocksource_init(); \ } -#define OMAP_SYS_TIMER(name) \ +#define OMAP_SYS_TIMER(name, clksrc) \ struct sys_timer omap##name##_timer = { \ - .init = omap##name##_timer_init, \ + .init = omap##name##_##clksrc##_timer_init, \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) -OMAP_SYS_TIMER(2) -#endif +OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", + 2, OMAP2_MPU_SOURCE); +OMAP_SYS_TIMER(2, sync32k); +#endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) -OMAP_SYS_TIMER(3) -OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, - 2, OMAP3_MPU_SOURCE) -OMAP_SYS_TIMER(3_secure) -#endif +OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3, sync32k); +OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3_secure, sync32k); +OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3_gp, gptimer); +#endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_SOC_AM33XX -OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) -OMAP_SYS_TIMER(3_am33xx) -#endif +OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); +OMAP_SYS_TIMER(3_am33xx, gptimer); +#endif /* CONFIG_SOC_AM33XX */ #ifdef CONFIG_ARCH_OMAP4 +OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, 29); -#endif - -static void __init omap4_timer_init(void) +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); +static void __init omap4_local_timer_init(void) { - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_clocksource_init(2, OMAP4_MPU_SOURCE); -#ifdef CONFIG_LOCAL_TIMERS + omap4_sync32k_timer_init(); /* Local timers are not supprted on OMAP4430 ES1.0 */ if (omap_rev() != OMAP4430_REV_ES1_0) { int err; @@ -488,26 +626,32 @@ static void __init omap4_timer_init(void) if (err) pr_err("twd_local_timer_register failed %d\n", err); } -#endif } -OMAP_SYS_TIMER(4) -#endif +#else /* CONFIG_LOCAL_TIMERS */ +static void __init omap4_local_timer_init(void) +{ + omap4_sync32k_timer_init(); +} +#endif /* CONFIG_LOCAL_TIMERS */ +OMAP_SYS_TIMER(4, local); +#endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 -static void __init omap5_timer_init(void) +OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); +static void __init omap5_realtime_timer_init(void) { int err; - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_clocksource_init(2, OMAP4_MPU_SOURCE); + omap5_sync32k_timer_init(); realtime_counter_init(); err = arch_timer_of_register(); if (err) pr_err("%s: arch_timer_register failed %d\n", __func__, err); } -OMAP_SYS_TIMER(5) -#endif +OMAP_SYS_TIMER(5, realtime); +#endif /* CONFIG_SOC_OMAP5 */ /** * omap_timer_init - build and register timer device with an @@ -559,6 +703,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) if (timer_dev_attr) pdata->timer_capability = timer_dev_attr->timer_capability; + pdata->timer_errata = omap_dm_timer_get_errata(); + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), NULL, 0, 0); @@ -583,6 +730,10 @@ static int __init omap2_dm_timer_init(void) { int ret; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); if (unlikely(ret)) { pr_err("%s: device registration failed.\n", __func__); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 44c4205..e49b40b 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -26,9 +26,6 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> -#include <plat/i2c.h> -#include <plat/usb.h> - #include "soc.h" #include "twl-common.h" #include "pm.h" @@ -73,6 +70,7 @@ void __init omap4_pmic_init(const char *pmic_type, { /* PMIC part*/ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data); /* Register additional devices on i2c1 bus if needed */ diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 3c43449..d1dbe12 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -25,10 +25,10 @@ #include <asm/io.h> -#include <plat/usb.h> -#include <plat/omap_device.h> - +#include "soc.h" +#include "omap_device.h" #include "mux.h" +#include "usb.h" #ifdef CONFIG_MFD_OMAP_USB_HOST diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 51da21c..7b33b37 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -25,12 +25,10 @@ #include <linux/io.h> #include <linux/usb/musb.h> -#include <plat/usb.h> -#include <plat/omap_device.h> - -#include "am35xx.h" - +#include "omap_device.h" +#include "soc.h" #include "mux.h" +#include "usb.h" static struct musb_hdrc_config musb_config = { .multipoint = 1, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 805bea6..a8795ff 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -15,10 +15,11 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/export.h> +#include <linux/platform_data/usb-omap.h> #include <linux/usb/musb.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h new file mode 100644 index 0000000..9b986ea --- /dev/null +++ b/arch/arm/mach-omap2/usb.h @@ -0,0 +1,82 @@ +#include <linux/platform_data/usb-omap.h> + +/* AM35x */ +/* USB 2.0 PHY Control */ +#define CONF2_PHY_GPIOMODE (1 << 23) +#define CONF2_OTGMODE (3 << 14) +#define CONF2_NO_OVERRIDE (0 << 14) +#define CONF2_FORCE_HOST (1 << 14) +#define CONF2_FORCE_DEVICE (2 << 14) +#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) +#define CONF2_SESENDEN (1 << 13) +#define CONF2_VBDTCTEN (1 << 12) +#define CONF2_REFFREQ_24MHZ (2 << 8) +#define CONF2_REFFREQ_26MHZ (7 << 8) +#define CONF2_REFFREQ_13MHZ (6 << 8) +#define CONF2_REFFREQ (0xf << 8) +#define CONF2_PHYCLKGD (1 << 7) +#define CONF2_VBUSSENSE (1 << 6) +#define CONF2_PHY_PLLON (1 << 5) +#define CONF2_RESET (1 << 4) +#define CONF2_PHYPWRDN (1 << 3) +#define CONF2_OTGPWRDN (1 << 2) +#define CONF2_DATPOL (1 << 1) + +/* TI81XX specific definitions */ +#define USBCTRL0 0x620 +#define USBSTAT0 0x624 + +/* TI816X PHY controls bits */ +#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) +#define TI816X_USBPHY_REFCLK_OSC (1 << 8) + +/* TI814X PHY controls bits */ +#define USBPHY_CM_PWRDN (1 << 0) +#define USBPHY_OTG_PWRDN (1 << 1) +#define USBPHY_CHGDET_DIS (1 << 2) +#define USBPHY_CHGDET_RSTRT (1 << 3) +#define USBPHY_SRCONDM (1 << 4) +#define USBPHY_SINKONDP (1 << 5) +#define USBPHY_CHGISINK_EN (1 << 6) +#define USBPHY_CHGVSRC_EN (1 << 7) +#define USBPHY_DMPULLUP (1 << 8) +#define USBPHY_DPPULLUP (1 << 9) +#define USBPHY_CDET_EXTCTL (1 << 10) +#define USBPHY_GPIO_MODE (1 << 12) +#define USBPHY_DPOPBUFCTL (1 << 13) +#define USBPHY_DMOPBUFCTL (1 << 14) +#define USBPHY_DPINPUT (1 << 15) +#define USBPHY_DMINPUT (1 << 16) +#define USBPHY_DPGPIO_PD (1 << 17) +#define USBPHY_DMGPIO_PD (1 << 18) +#define USBPHY_OTGVDET_EN (1 << 19) +#define USBPHY_OTGSESSEND_EN (1 << 20) +#define USBPHY_DATA_POLARITY (1 << 23) + +struct usbhs_omap_board_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + /* have to be valid if phy_reset is true and portx is in phy mode */ + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + + /* Set this to true for ES2.x silicon */ + unsigned es2_compatibility:1; + + unsigned phy_reset:1; + + /* + * Regulators for USB PHYs. + * Each PHY can have a separate regulator. + */ + struct regulator *regulator[OMAP3_HS_USB_PORTS]; +}; + +extern void usb_musb_init(struct omap_musb_board_data *board_data); +extern void usbhs_init(const struct usbhs_omap_board_data *pdata); + +extern void am35x_musb_reset(void); +extern void am35x_musb_phy_power(u8 on); +extern void am35x_musb_clear_irq(void); +extern void am35x_set_mode(u8 musb_mode); +extern void ti81xx_musb_phy_power(u8 on); + diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index b2f1c67..7c2b4ed 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -1,6 +1,8 @@ /* * OMAP2+ MPU WD_TIMER-specific code * + * Copyright (C) 2012 Texas Instruments, Inc. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -11,10 +13,14 @@ #include <linux/io.h> #include <linux/err.h> -#include <plat/omap_hwmod.h> +#include <linux/platform_data/omap-wd-timer.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "wd_timer.h" #include "common.h" +#include "prm.h" +#include "soc.h" /* * In order to avoid any assumptions from bootloader regarding WDT @@ -26,9 +32,6 @@ #define OMAP_WDT_WPS 0x34 #define OMAP_WDT_SPR 0x48 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - int omap2_wd_timer_disable(struct omap_hwmod *oh) { void __iomem *base; @@ -99,3 +102,32 @@ int omap2_wd_timer_reset(struct omap_hwmod *oh) return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : omap2_wd_timer_disable(oh); } + +static int __init omap_init_wdt(void) +{ + int id = -1; + struct platform_device *pdev; + struct omap_hwmod *oh; + char *oh_name = "wd_timer2"; + char *dev_name = "omap_wdt"; + struct omap_wd_timer_platform_data pdata; + + if (!cpu_class_is_omap2() || of_have_populated_dt()) + return 0; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up wd_timer%d hwmod\n", id); + return -EINVAL; + } + + pdata.read_reset_sources = prm_read_reset_sources; + + pdev = omap_device_build(dev_name, id, oh, &pdata, + sizeof(struct omap_wd_timer_platform_data), + NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", + dev_name, oh->name); + return 0; +} +subsys_initcall(omap_init_wdt); diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h index f6bbba7..a78f810 100644 --- a/arch/arm/mach-omap2/wd_timer.h +++ b/arch/arm/mach-omap2/wd_timer.h @@ -10,7 +10,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H #define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H -#include <plat/omap_hwmod.h> +#include "omap_hwmod.h" extern int omap2_wd_timer_disable(struct omap_hwmod *oh); extern int omap2_wd_timer_reset(struct omap_hwmod *oh); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 11aa739..86eec41 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,27 +2,6 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" -config ARCH_PXA_V7 - bool "ARMv7 (PXA95x) based systems" - -if ARCH_PXA_V7 -comment "Marvell Dev Platforms (sorted by hardware release time)" -config MACH_TAVOREVB3 - bool "PXA95x Development Platform (aka TavorEVB III)" - select CPU_PXA955 - -config MACH_SAARB - bool "PXA955 Handheld Platform (aka SAARB)" - select CPU_PXA955 -endif - -config PXA_V7_MACH_AUTO - def_bool y - depends on ARCH_PXA_V7 - depends on !MACH_SAARB - select MACH_TAVOREVB3 - -if !ARCH_PXA_V7 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config MACH_PXA3XX_DT @@ -630,7 +609,6 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select HAVE_PWM select PXA27x -endif endmenu config PXA25x @@ -688,18 +666,6 @@ config CPU_PXA935 help PXA935 (codename Tavor-P65) -config PXA95x - bool - select CPU_PJ4 - help - Select code specific to PXA95x variants - -config CPU_PXA955 - bool - select PXA95x - help - PXA950 (codename MG1) - config PXA_SHARP_C7xx bool select SHARPSL_PM diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index ee88d6e..12c5005 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -19,7 +19,6 @@ endif obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o -obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o @@ -36,9 +35,7 @@ obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o -obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o obj-$(CONFIG_MACH_SAAR) += saar.o -obj-$(CONFIG_MACH_SAARB) += saarb.o # 3rd Party Dev Platforms obj-$(CONFIG_ARCH_PXA_IDP) += idp.o diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 3a258b1..1f65d32 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -57,7 +57,7 @@ void clk_pxa2xx_cken_disable(struct clk *clk); extern struct syscore_ops pxa2xx_clock_syscore_ops; -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA3xx) #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \ struct clk clk_##_name = { \ .ops = &clk_pxa3xx_cken_ops, \ diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index ddaa04d..daa86d3 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -703,7 +703,7 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) } #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) static struct resource pxa27x_resource_keypad[] = { [0] = { .start = 0x41500000, @@ -872,7 +872,7 @@ struct platform_device pxa27x_device_pwm1 = { .resource = pxa27x_resource_pwm1, .num_resources = ARRAY_SIZE(pxa27x_resource_pwm1), }; -#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/ +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ #ifdef CONFIG_PXA3xx static struct resource pxa3xx_resources_mci2[] = { @@ -981,7 +981,7 @@ struct platform_device pxa3xx_device_gcu = { #endif /* CONFIG_PXA3xx */ -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA3xx) static struct resource pxa3xx_resources_i2c_power[] = { { .start = 0x40f500c0, @@ -1082,7 +1082,7 @@ struct platform_device pxa3xx_device_ssp4 = { .resource = pxa3xx_resource_ssp4, .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4), }; -#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */ +#endif /* CONFIG_PXA3xx */ struct resource pxa_resource_gpio[] = { { diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 56d92e5..ccb06e4 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -194,17 +194,6 @@ #define __cpu_is_pxa935(id) (0) #endif -#ifdef CONFIG_CPU_PXA955 -#define __cpu_is_pxa955(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x581 || _id == 0xc08 \ - || _id == 0xb76; \ - }) -#else -#define __cpu_is_pxa955(id) (0) -#endif - #define cpu_is_pxa210() \ ({ \ __cpu_is_pxa210(read_cpuid_id()); \ @@ -255,10 +244,6 @@ __cpu_is_pxa935(read_cpuid_id()); \ }) -#define cpu_is_pxa955() \ - ({ \ - __cpu_is_pxa955(read_cpuid_id()); \ - }) /* @@ -297,15 +282,6 @@ #define __cpu_is_pxa93x(id) (0) #endif -#ifdef CONFIG_PXA95x -#define __cpu_is_pxa95x(id) \ - ({ \ - __cpu_is_pxa955(id); \ - }) -#else -#define __cpu_is_pxa95x(id) (0) -#endif - #define cpu_is_pxa2xx() \ ({ \ __cpu_is_pxa2xx(read_cpuid_id()); \ @@ -321,10 +297,6 @@ __cpu_is_pxa93x(read_cpuid_id()); \ }) -#define cpu_is_pxa95x() \ - ({ \ - __cpu_is_pxa95x(read_cpuid_id()); \ - }) /* * return current memory and LCD clock frequency in units of 10kHz diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 8765782..48c2fd8 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -84,7 +84,6 @@ #define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */ #define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */ #define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */ -#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */ #define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */ #define PXA_GPIO_IRQ_BASE PXA_IRQ(96) diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h index cd3e57f..6dd7fa1 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h @@ -7,7 +7,6 @@ extern void __init pxa3xx_map_io(void); extern void __init pxa3xx_init_irq(void); -extern void __init pxa95x_init_irq(void); #define pxa3xx_handle_irq ichp_handle_irq diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h deleted file mode 100644 index cbb097c..0000000 --- a/arch/arm/mach-pxa/include/mach/pxa95x.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_PXA95X_H -#define __MACH_PXA95X_H - -#include <mach/pxa3xx.h> -#include <mach/mfp-pxa930.h> - -#endif /* __MACH_PXA95X_H */ diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h index 2f82332..9a827e3 100644 --- a/arch/arm/mach-pxa/include/mach/udc.h +++ b/arch/arm/mach-pxa/include/mach/udc.h @@ -2,7 +2,7 @@ * arch/arm/mach-pxa/include/mach/udc.h * */ -#include <asm/mach/udc_pxa2xx.h> +#include <linux/platform_data/pxa2xx_udc.h> extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 3352b37..3f5171e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -209,6 +209,7 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -338,6 +339,10 @@ void __init pxa25x_map_io(void) pxa25x_get_clk_frequency_khz(1); } +static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { + .gpio_set_wake = gpio_set_wake, +}; + static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_udc, &pxa_device_pmu, @@ -370,6 +375,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); + pxa_register_device(&pxa_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); if (ret) diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index 7dbe3cc..e329cce 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -384,18 +384,7 @@ static struct platform_driver pxa3xx_u2d_ulpi_driver = { .probe = pxa3xx_u2d_probe, .remove = pxa3xx_u2d_remove, }; - -static int pxa3xx_u2d_ulpi_init(void) -{ - return platform_driver_register(&pxa3xx_u2d_ulpi_driver); -} -module_init(pxa3xx_u2d_ulpi_init); - -static void __exit pxa3xx_u2d_ulpi_exit(void) -{ - platform_driver_unregister(&pxa3xx_u2d_ulpi_driver); -} -module_exit(pxa3xx_u2d_ulpi_exit); +module_platform_driver(pxa3xx_u2d_ulpi_driver); MODULE_DESCRIPTION("PXA3xx U2D ULPI driver"); MODULE_AUTHOR("Igor Grinberg"); diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c deleted file mode 100644 index 47601f8..0000000 --- a/arch/arm/mach-pxa/pxa95x.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/pxa95x.c - * - * code specific to PXA95x aka MGx - * - * Copyright (C) 2009-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pm.h> -#include <linux/platform_device.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/pxa930.h> -#include <mach/reset.h> -#include <mach/pm.h> -#include <mach/dma.h> - -#include "generic.h" -#include "devices.h" -#include "clock.h" - -static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = { - - MFP_ADDR(GPIO0, 0x02e0), - MFP_ADDR(GPIO1, 0x02dc), - MFP_ADDR(GPIO2, 0x02e8), - MFP_ADDR(GPIO3, 0x02d8), - MFP_ADDR(GPIO4, 0x02e4), - MFP_ADDR(GPIO5, 0x02ec), - MFP_ADDR(GPIO6, 0x02f8), - MFP_ADDR(GPIO7, 0x02fc), - MFP_ADDR(GPIO8, 0x0300), - MFP_ADDR(GPIO9, 0x02d4), - MFP_ADDR(GPIO10, 0x02f4), - MFP_ADDR(GPIO11, 0x02f0), - MFP_ADDR(GPIO12, 0x0304), - MFP_ADDR(GPIO13, 0x0310), - MFP_ADDR(GPIO14, 0x0308), - MFP_ADDR(GPIO15, 0x030c), - MFP_ADDR(GPIO16, 0x04e8), - MFP_ADDR(GPIO17, 0x04f4), - MFP_ADDR(GPIO18, 0x04f8), - MFP_ADDR(GPIO19, 0x04fc), - MFP_ADDR(GPIO20, 0x0518), - MFP_ADDR(GPIO21, 0x051c), - MFP_ADDR(GPIO22, 0x04ec), - MFP_ADDR(GPIO23, 0x0500), - MFP_ADDR(GPIO24, 0x04f0), - MFP_ADDR(GPIO25, 0x0504), - MFP_ADDR(GPIO26, 0x0510), - MFP_ADDR(GPIO27, 0x0514), - MFP_ADDR(GPIO28, 0x0520), - MFP_ADDR(GPIO29, 0x0600), - MFP_ADDR(GPIO30, 0x0618), - MFP_ADDR(GPIO31, 0x0610), - MFP_ADDR(GPIO32, 0x060c), - MFP_ADDR(GPIO33, 0x061c), - MFP_ADDR(GPIO34, 0x0620), - MFP_ADDR(GPIO35, 0x0628), - MFP_ADDR(GPIO36, 0x062c), - MFP_ADDR(GPIO37, 0x0630), - MFP_ADDR(GPIO38, 0x0634), - MFP_ADDR(GPIO39, 0x0638), - MFP_ADDR(GPIO40, 0x063c), - MFP_ADDR(GPIO41, 0x0614), - MFP_ADDR(GPIO42, 0x0624), - MFP_ADDR(GPIO43, 0x0608), - MFP_ADDR(GPIO44, 0x0604), - MFP_ADDR(GPIO45, 0x050c), - MFP_ADDR(GPIO46, 0x0508), - MFP_ADDR(GPIO47, 0x02bc), - MFP_ADDR(GPIO48, 0x02b4), - MFP_ADDR(GPIO49, 0x02b8), - MFP_ADDR(GPIO50, 0x02c8), - MFP_ADDR(GPIO51, 0x02c0), - MFP_ADDR(GPIO52, 0x02c4), - MFP_ADDR(GPIO53, 0x02d0), - MFP_ADDR(GPIO54, 0x02cc), - MFP_ADDR(GPIO55, 0x029c), - MFP_ADDR(GPIO56, 0x02a0), - MFP_ADDR(GPIO57, 0x0294), - MFP_ADDR(GPIO58, 0x0298), - MFP_ADDR(GPIO59, 0x02a4), - MFP_ADDR(GPIO60, 0x02a8), - MFP_ADDR(GPIO61, 0x02b0), - MFP_ADDR(GPIO62, 0x02ac), - MFP_ADDR(GPIO63, 0x0640), - MFP_ADDR(GPIO64, 0x065c), - MFP_ADDR(GPIO65, 0x0648), - MFP_ADDR(GPIO66, 0x0644), - MFP_ADDR(GPIO67, 0x0674), - MFP_ADDR(GPIO68, 0x0658), - MFP_ADDR(GPIO69, 0x0654), - MFP_ADDR(GPIO70, 0x0660), - MFP_ADDR(GPIO71, 0x0668), - MFP_ADDR(GPIO72, 0x0664), - MFP_ADDR(GPIO73, 0x0650), - MFP_ADDR(GPIO74, 0x066c), - MFP_ADDR(GPIO75, 0x064c), - MFP_ADDR(GPIO76, 0x0670), - MFP_ADDR(GPIO77, 0x0678), - MFP_ADDR(GPIO78, 0x067c), - MFP_ADDR(GPIO79, 0x0694), - MFP_ADDR(GPIO80, 0x069c), - MFP_ADDR(GPIO81, 0x06a0), - MFP_ADDR(GPIO82, 0x06a4), - MFP_ADDR(GPIO83, 0x0698), - MFP_ADDR(GPIO84, 0x06bc), - MFP_ADDR(GPIO85, 0x06b4), - MFP_ADDR(GPIO86, 0x06b0), - MFP_ADDR(GPIO87, 0x06c0), - MFP_ADDR(GPIO88, 0x06c4), - MFP_ADDR(GPIO89, 0x06ac), - MFP_ADDR(GPIO90, 0x0680), - MFP_ADDR(GPIO91, 0x0684), - MFP_ADDR(GPIO92, 0x0688), - MFP_ADDR(GPIO93, 0x0690), - MFP_ADDR(GPIO94, 0x068c), - MFP_ADDR(GPIO95, 0x06a8), - MFP_ADDR(GPIO96, 0x06b8), - MFP_ADDR(GPIO97, 0x0410), - MFP_ADDR(GPIO98, 0x0418), - MFP_ADDR(GPIO99, 0x041c), - MFP_ADDR(GPIO100, 0x0414), - MFP_ADDR(GPIO101, 0x0408), - MFP_ADDR(GPIO102, 0x0324), - MFP_ADDR(GPIO103, 0x040c), - MFP_ADDR(GPIO104, 0x0400), - MFP_ADDR(GPIO105, 0x0328), - MFP_ADDR(GPIO106, 0x0404), - - MFP_ADDR(GPIO159, 0x0524), - MFP_ADDR(GPIO163, 0x0534), - MFP_ADDR(GPIO167, 0x0544), - MFP_ADDR(GPIO168, 0x0548), - MFP_ADDR(GPIO169, 0x054c), - MFP_ADDR(GPIO170, 0x0550), - MFP_ADDR(GPIO171, 0x0554), - MFP_ADDR(GPIO172, 0x0558), - MFP_ADDR(GPIO173, 0x055c), - - MFP_ADDR(nXCVREN, 0x0204), - MFP_ADDR(DF_CLE_nOE, 0x020c), - MFP_ADDR(DF_nADV1_ALE, 0x0218), - MFP_ADDR(DF_SCLK_E, 0x0214), - MFP_ADDR(DF_SCLK_S, 0x0210), - MFP_ADDR(nBE0, 0x021c), - MFP_ADDR(nBE1, 0x0220), - MFP_ADDR(DF_nADV2_ALE, 0x0224), - MFP_ADDR(DF_INT_RnB, 0x0228), - MFP_ADDR(DF_nCS0, 0x022c), - MFP_ADDR(DF_nCS1, 0x0230), - MFP_ADDR(nLUA, 0x0254), - MFP_ADDR(nLLA, 0x0258), - MFP_ADDR(DF_nWE, 0x0234), - MFP_ADDR(DF_nRE_nOE, 0x0238), - MFP_ADDR(DF_ADDR0, 0x024c), - MFP_ADDR(DF_ADDR1, 0x0250), - MFP_ADDR(DF_ADDR2, 0x025c), - MFP_ADDR(DF_ADDR3, 0x0260), - MFP_ADDR(DF_IO0, 0x023c), - MFP_ADDR(DF_IO1, 0x0240), - MFP_ADDR(DF_IO2, 0x0244), - MFP_ADDR(DF_IO3, 0x0248), - MFP_ADDR(DF_IO4, 0x0264), - MFP_ADDR(DF_IO5, 0x0268), - MFP_ADDR(DF_IO6, 0x026c), - MFP_ADDR(DF_IO7, 0x0270), - MFP_ADDR(DF_IO8, 0x0274), - MFP_ADDR(DF_IO9, 0x0278), - MFP_ADDR(DF_IO10, 0x027c), - MFP_ADDR(DF_IO11, 0x0280), - MFP_ADDR(DF_IO12, 0x0284), - MFP_ADDR(DF_IO13, 0x0288), - MFP_ADDR(DF_IO14, 0x028c), - MFP_ADDR(DF_IO15, 0x0290), - - MFP_ADDR(GSIM_UIO, 0x0314), - MFP_ADDR(GSIM_UCLK, 0x0318), - MFP_ADDR(GSIM_UDET, 0x031c), - MFP_ADDR(GSIM_nURST, 0x0320), - - MFP_ADDR(PMIC_INT, 0x06c8), - - MFP_ADDR(RDY, 0x0200), - - MFP_ADDR_END, -}; - -static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops); -static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70); -static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0); -static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0); - -static struct clk_lookup pxa95x_clkregs[] = { - INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), - /* Power I2C clock is always on */ - INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), - INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"), - INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL), - INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL), - INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL), - INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL), - INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL), - INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL), - INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - -void __init pxa95x_init_irq(void) -{ - pxa_init_irq(96, NULL); -} - -/* - * device registration specific to PXA93x. - */ - -void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info) -{ - pxa_register_device(&pxa3xx_device_i2c_power, info); -} - -static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, - &sa1100_device_rtc, - &pxa_device_rtc, - &pxa27x_device_ssp1, - &pxa27x_device_ssp2, - &pxa27x_device_ssp3, - &pxa3xx_device_ssp4, - &pxa27x_device_pwm0, - &pxa27x_device_pwm1, -}; - -static int __init pxa95x_init(void) -{ - int ret = 0, i; - - if (cpu_is_pxa95x()) { - mfp_init_base(io_p2v(MFPR_BASE)); - mfp_init_addr(pxa95x_mfp_addr_map); - - reset_status = ARSR; - - /* - * clear RDH bit every time after reset - * - * Note: the last 3 bits DxS are write-1-to-clear so carefully - * preserve them here in case they will be referenced later - */ - ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - - clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs)); - - if ((ret = pxa_init_dma(IRQ_DMA, 32))) - return ret; - - register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa3xx_clock_syscore_ops); - - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); - } - - return ret; -} - -postcore_initcall(pxa95x_init); diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c deleted file mode 100644 index 5aded5e..0000000 --- a/arch/arm/mach-pxa/saarb.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/saarb.c - * - * Support for the Marvell Handheld Platform (aka SAARB) - * - * Copyright (C) 2007-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/mfd/88pm860x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/mfp.h> -#include <mach/mfp-pxa930.h> -#include <mach/pxa95x.h> - -#include "generic.h" - -#define SAARB_NR_IRQS (IRQ_BOARD_START + 40) - -static struct pm860x_touch_pdata saarb_touch = { - .gpadc_prebias = 1, - .slot_cycle = 1, - .tsi_prebias = 6, - .pen_prebias = 16, - .pen_prechg = 2, - .res_x = 300, -}; - -static struct pm860x_backlight_pdata saarb_backlight[] = { - { - .id = PM8606_ID_BACKLIGHT, - .iset = PM8606_WLED_CURRENT(24), - .flags = PM8606_BACKLIGHT1, - }, - {}, -}; - -static struct pm860x_led_pdata saarb_led[] = { - { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_BLUE, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_BLUE, - }, -}; - -static struct pm860x_platform_data saarb_pm8607_info = { - .touch = &saarb_touch, - .backlight = &saarb_backlight[0], - .led = &saarb_led[0], - .companion_addr = 0x10, - .irq_mode = 0, - .irq_base = IRQ_BOARD_START, - - .i2c_port = GI2C_PORT, -}; - -static struct i2c_board_info saarb_i2c_info[] = { - { - .type = "88PM860x", - .addr = 0x34, - .platform_data = &saarb_pm8607_info, - .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), - }, -}; - -static void __init saarb_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_i2c_info(NULL); - i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info)); -} - -MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") - .atag_offset = 0x100, - .map_io = pxa3xx_map_io, - .nr_irqs = SAARB_NR_IRQS, - .init_irq = pxa95x_init_irq, - .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, - .init_machine = saarb_init, - .restart = pxa_restart, -MACHINE_END - diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c deleted file mode 100644 index f7d9305..0000000 --- a/arch/arm/mach-pxa/tavorevb3.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/tavorevb3.c - * - * Support for the Marvell EVB3 Development Platform. - * - * Copyright: (C) Copyright 2008-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> -#include <linux/mfd/88pm860x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/pxa930.h> - -#include "devices.h" -#include "generic.h" - -#define TAVOREVB3_NR_IRQS (IRQ_BOARD_START + 24) - -static mfp_cfg_t evb3_mfp_cfg[] __initdata = { - /* UART */ - GPIO53_UART1_TXD, - GPIO54_UART1_RXD, - - /* PMIC */ - PMIC_INT_GPIO83, -}; - -#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) -static struct pm860x_touch_pdata evb3_touch = { - .gpadc_prebias = 1, - .slot_cycle = 1, - .tsi_prebias = 6, - .pen_prebias = 16, - .pen_prechg = 2, - .res_x = 300, -}; - -static struct pm860x_backlight_pdata evb3_backlight[] = { - { - .id = PM8606_ID_BACKLIGHT, - .iset = PM8606_WLED_CURRENT(24), - .flags = PM8606_BACKLIGHT1, - }, - {}, -}; - -static struct pm860x_led_pdata evb3_led[] = { - { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_BLUE, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_BLUE, - }, -}; - -static struct pm860x_platform_data evb3_pm8607_info = { - .touch = &evb3_touch, - .backlight = &evb3_backlight[0], - .led = &evb3_led[0], - .companion_addr = 0x10, - .irq_mode = 0, - .irq_base = IRQ_BOARD_START, - - .i2c_port = GI2C_PORT, -}; - -static struct i2c_board_info evb3_i2c_info[] = { - { - .type = "88PM860x", - .addr = 0x34, - .platform_data = &evb3_pm8607_info, - .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), - }, -}; - -static void __init evb3_init_i2c(void) -{ - pxa_set_i2c_info(NULL); - i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info)); -} -#else -static inline void evb3_init_i2c(void) {} -#endif - -static void __init evb3_init(void) -{ - /* initialize MFP configurations */ - pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg)); - - pxa_set_ffuart_info(NULL); - - evb3_init_i2c(); -} - -MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") - .atag_offset = 0x100, - .map_io = pxa3xx_map_io, - .nr_irqs = TAVOREVB3_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, - .init_machine = evb3_init, - .restart = pxa_restart, -MACHINE_END diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index d3b3cd2..28511d4 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -467,6 +467,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, + .smp = smp_ops(realview_smp_ops), .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_early = realview_init_early, diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 01f70c9..25df14a 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -400,7 +400,7 @@ config MACH_MINI2440 bool "MINI2440 development board" select EEPROM_AT24 select LEDS_CLASS - select LEDS_TRIGGER + select LEDS_TRIGGERS select LEDS_TRIGGER_BACKLIGHT select NEW_LEDS select S3C_DEV_NAND diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index 7f689ce..bdaba59 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -158,12 +158,6 @@ static struct clk init_clocks_off[] = { .devname = "s3c2410-spi.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI0, - }, { - .name = "spi", - .devname = "s3c2410-spi.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SPI1, } }; diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 28041e8..1a6f857 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,11 +138,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", -#ifdef CONFIG_S3C_DEV_I2C1 .devname = "s3c2440-i2c.0", -#else - .devname = "s3c2440-i2c", -#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, @@ -319,10 +315,6 @@ static struct clk init_clocks_off[] = { .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MFC, }, { - .name = "cam", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_CAM, - }, { .name = "sclk_jpeg", .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_JPEG, @@ -681,15 +673,6 @@ static struct clksrc_sources clkset_audio2 = { .nr_sources = ARRAY_SIZE(clkset_audio2_list), }; -static struct clk *clkset_camif_list[] = { - &clk_h2, -}; - -static struct clksrc_sources clkset_camif = { - .sources = clkset_camif_list, - .nr_sources = ARRAY_SIZE(clkset_camif_list), -}; - static struct clksrc_clk clksrcs[] = { { .clk = { @@ -744,10 +727,9 @@ static struct clksrc_clk clksrcs[] = { .name = "camera", .ctrlbit = S3C_CLKCON_SCLK_CAM, .enable = s3c64xx_sclk_ctrl, + .parent = &clk_h2, }, .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, - .reg_src = { .reg = NULL, .shift = 0, .size = 0 }, - .sources = &clkset_camif, }, }; diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index be746e3..aef303b 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -155,7 +155,6 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); - init_consistent_dma_size(SZ_8M); /* detect cpu id */ s3c64xx_init_cpu(); diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 111e404..8ae5800 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -187,7 +187,6 @@ void __init s5p6440_map_io(void) s5p6440_default_sdhci2(); iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); - init_consistent_dma_size(SZ_8M); } void __init s5p6450_map_io(void) @@ -202,7 +201,6 @@ void __init s5p6450_map_io(void) s5p6450_default_sdhci2(); iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); - init_consistent_dma_size(SZ_8M); } /* diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index a0c50ef..9dfe93e 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -169,8 +169,6 @@ void __init s5pv210_init_io(struct map_desc *mach_desc, int size) void __init s5pv210_map_io(void) { - init_consistent_dma_size(14 << 20); - /* initialise device information early */ s5pv210_default_sdhci0(); s5pv210_default_sdhci1(); diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 55e1dba..c72b310 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -774,7 +774,6 @@ static void __init goni_pmic_init(void) /* MoviNAND */ static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { .max_width = 4, - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 6a7ad3c..9a23739 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/ioport.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/serial_core.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -37,7 +38,6 @@ #include <asm/mach/flash.h> #include <asm/mach/irda.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/assabet.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 038df48..b2dadf3 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/tty.h> @@ -34,7 +35,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/hardware/sa1111.h> -#include <asm/mach/serial_sa1100.h> #include <mach/badge4.h> diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index ad0eb08..304bca4 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/tty.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/irq.h> #include <linux/mtd/mtd.h> @@ -27,7 +28,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/cerf.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 170cb61..45f424f 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/delay.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -40,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index 63150e1..f17e738 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -17,12 +17,12 @@ #include <linux/mfd/htc-egpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/serial_core.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/h3xxx.h> diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index fc106aa..d005939 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/cpufreq.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/serial_core.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -35,7 +36,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index e3084f4..35cfc42 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/delay.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/mtd/mtd.h> @@ -30,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 3048b17..f69f78f 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -4,6 +4,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/tty.h> #include <linux/gpio.h> #include <linux/leds.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 41f69d9..102e08f 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/root_dev.h> @@ -24,7 +25,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <mach/hardware.h> #include <mach/nanoengine.h> diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 266db87..88be047 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -7,6 +7,7 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/serial_core.h> @@ -14,7 +15,6 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <asm/hardware/sa1111.h> #include <asm/sizes.h> diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 37fe0a0..c51bb63 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -6,6 +6,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/ioport.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/irq.h> #include <linux/io.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <asm/mach/serial_sa1100.h> #include <mach/irqs.h> #include "generic.h" diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index ff6b7b3..6460d25 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -5,6 +5,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/kernel.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/tty.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -18,7 +19,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/shannon.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 71790e5..6d65f65 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -9,6 +9,7 @@ #include <linux/proc_fs.h> #include <linux/string.h> #include <linux/pm.h> +#include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> @@ -23,7 +24,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/serial_sa1100.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> #include <mach/simpad.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 0a43f31..7a05de7 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -548,7 +548,6 @@ static struct platform_device fsi_ak4648_device = { /* I2C */ static struct pcf857x_platform_data pcf8575_pdata = { .gpio_base = GPIO_PCF8575_BASE, - .irq = intcs_evt2irq(0x3260), /* IRQ19 */ }; static struct i2c_board_info i2c0_devices[] = { @@ -570,6 +569,7 @@ static struct i2c_board_info i2c1_devices[] = { static struct i2c_board_info i2c3_devices[] = { { I2C_BOARD_INFO("pcf8575", 0x20), + .irq = intcs_evt2irq(0x3260), /* IRQ19 */ .platform_data = &pcf8575_pdata, }, }; diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 6ac242c..0952224 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -66,12 +66,6 @@ static struct map_desc r8a7740_io_desc[] __initdata = { void __init r8a7740_map_io(void) { iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); - - /* - * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't - * enough to allocate the frame buffer memory. - */ - init_consistent_dma_size(12 << 20); } /* SCIFA0 */ diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index a360111..c917882 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -58,12 +58,6 @@ static struct map_desc sh7372_io_desc[] __initdata = { void __init sh7372_map_io(void) { iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc)); - - /* - * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't - * enough to allocate the frame buffer memory. - */ - init_consistent_dma_size(12 << 20); } /* SCIFA0 */ diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b8efac4..12f3994 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -82,8 +82,6 @@ static struct map_desc u300_io_desc[] __initdata = { static void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); - /* We enable a real big DMA buffer if need be. */ - init_consistent_dma_size(SZ_4M); } /* @@ -1445,8 +1443,6 @@ static struct platform_device pinctrl_device = { static struct u300_gpio_platform u300_gpio_plat = { .ports = 7, .gpio_base = 0, - .gpio_irq_base = IRQ_U300_GPIO_BASE, - .pinctrl_device = &pinctrl_device, }; static struct platform_device gpio_device = { @@ -1590,6 +1586,7 @@ static struct platform_device *platform_devs[] __initdata = { &i2c1_device, &keypad_device, &rtc_device, + &pinctrl_device, &gpio_device, &nand_device, &wdog_device, @@ -1804,7 +1801,7 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ .atag_offset = 0x100, .map_io = u300_map_io, - .nr_irqs = NR_IRQS_U300, + .nr_irqs = 0, .init_irq = u300_init_irq, .handle_irq = vic_handle_irq, .timer = &u300_timer, diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index e27425a..21d5e76 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,79 +12,69 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 1 -#define IRQ_U300_INTCON1_START 33 +#define IRQ_U300_INTCON0_START 32 +#define IRQ_U300_INTCON1_START 64 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 1 -#define IRQ_U300_IRQ1_EXT 2 -#define IRQ_U300_DMA 3 -#define IRQ_U300_VIDEO_ENC_0 4 -#define IRQ_U300_VIDEO_ENC_1 5 -#define IRQ_U300_AAIF_RX 6 -#define IRQ_U300_AAIF_TX 7 -#define IRQ_U300_AAIF_VGPIO 8 -#define IRQ_U300_AAIF_WAKEUP 9 -#define IRQ_U300_PCM_I2S0_FRAME 10 -#define IRQ_U300_PCM_I2S0_FIFO 11 -#define IRQ_U300_PCM_I2S1_FRAME 12 -#define IRQ_U300_PCM_I2S1_FIFO 13 -#define IRQ_U300_XGAM_GAMCON 14 -#define IRQ_U300_XGAM_CDI 15 -#define IRQ_U300_XGAM_CDICON 16 -#define IRQ_U300_XGAM_PDI 18 -#define IRQ_U300_XGAM_PDICON 19 -#define IRQ_U300_XGAM_GAMEACC 20 -#define IRQ_U300_XGAM_MCIDCT 21 -#define IRQ_U300_APEX 22 -#define IRQ_U300_UART0 23 -#define IRQ_U300_SPI 24 -#define IRQ_U300_TIMER_APP_OS 25 -#define IRQ_U300_TIMER_APP_DD 26 -#define IRQ_U300_TIMER_APP_GP1 27 -#define IRQ_U300_TIMER_APP_GP2 28 -#define IRQ_U300_TIMER_OS 29 -#define IRQ_U300_TIMER_MS 30 -#define IRQ_U300_KEYPAD_KEYBF 31 -#define IRQ_U300_KEYPAD_KEYBR 32 +#define IRQ_U300_IRQ0_EXT 32 +#define IRQ_U300_IRQ1_EXT 33 +#define IRQ_U300_DMA 34 +#define IRQ_U300_VIDEO_ENC_0 35 +#define IRQ_U300_VIDEO_ENC_1 36 +#define IRQ_U300_AAIF_RX 37 +#define IRQ_U300_AAIF_TX 38 +#define IRQ_U300_AAIF_VGPIO 39 +#define IRQ_U300_AAIF_WAKEUP 40 +#define IRQ_U300_PCM_I2S0_FRAME 41 +#define IRQ_U300_PCM_I2S0_FIFO 42 +#define IRQ_U300_PCM_I2S1_FRAME 43 +#define IRQ_U300_PCM_I2S1_FIFO 44 +#define IRQ_U300_XGAM_GAMCON 45 +#define IRQ_U300_XGAM_CDI 46 +#define IRQ_U300_XGAM_CDICON 47 +#define IRQ_U300_XGAM_PDI 49 +#define IRQ_U300_XGAM_PDICON 50 +#define IRQ_U300_XGAM_GAMEACC 51 +#define IRQ_U300_XGAM_MCIDCT 52 +#define IRQ_U300_APEX 53 +#define IRQ_U300_UART0 54 +#define IRQ_U300_SPI 55 +#define IRQ_U300_TIMER_APP_OS 56 +#define IRQ_U300_TIMER_APP_DD 57 +#define IRQ_U300_TIMER_APP_GP1 58 +#define IRQ_U300_TIMER_APP_GP2 59 +#define IRQ_U300_TIMER_OS 60 +#define IRQ_U300_TIMER_MS 61 +#define IRQ_U300_KEYPAD_KEYBF 62 +#define IRQ_U300_KEYPAD_KEYBR 63 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 33 -#define IRQ_U300_GPIO_PORT1 34 -#define IRQ_U300_GPIO_PORT2 35 +#define IRQ_U300_GPIO_PORT0 64 +#define IRQ_U300_GPIO_PORT1 65 +#define IRQ_U300_GPIO_PORT2 66 /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 36 -#define IRQ_U300_EVHIST 37 -#define IRQ_U300_MSPRO 38 -#define IRQ_U300_MMCSD_MCIINTR0 39 -#define IRQ_U300_MMCSD_MCIINTR1 40 -#define IRQ_U300_I2C0 41 -#define IRQ_U300_I2C1 42 -#define IRQ_U300_RTC 43 -#define IRQ_U300_NFIF 44 -#define IRQ_U300_NFIF2 45 +#define IRQ_U300_WDOG 67 +#define IRQ_U300_EVHIST 68 +#define IRQ_U300_MSPRO 69 +#define IRQ_U300_MMCSD_MCIINTR0 70 +#define IRQ_U300_MMCSD_MCIINTR1 71 +#define IRQ_U300_I2C0 72 +#define IRQ_U300_I2C1 73 +#define IRQ_U300_RTC 74 +#define IRQ_U300_NFIF 75 +#define IRQ_U300_NFIF2 76 /* The DB3350-specific interrupt lines */ -#define IRQ_U300_ISP_F0 46 -#define IRQ_U300_ISP_F1 47 -#define IRQ_U300_ISP_F2 48 -#define IRQ_U300_ISP_F3 49 -#define IRQ_U300_ISP_F4 50 -#define IRQ_U300_GPIO_PORT3 51 -#define IRQ_U300_SYSCON_PLL_LOCK 52 -#define IRQ_U300_UART1 53 -#define IRQ_U300_GPIO_PORT4 54 -#define IRQ_U300_GPIO_PORT5 55 -#define IRQ_U300_GPIO_PORT6 56 -#define U300_VIC_IRQS_END 57 - -/* Maximum 8*7 GPIO lines */ -#ifdef CONFIG_PINCTRL_COH901 -#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) -#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) -#else -#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) -#endif - -#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define IRQ_U300_ISP_F0 77 +#define IRQ_U300_ISP_F1 78 +#define IRQ_U300_ISP_F2 79 +#define IRQ_U300_ISP_F3 80 +#define IRQ_U300_ISP_F4 81 +#define IRQ_U300_GPIO_PORT3 82 +#define IRQ_U300_SYSCON_PLL_LOCK 83 +#define IRQ_U300_UART1 84 +#define IRQ_U300_GPIO_PORT4 85 +#define IRQ_U300_GPIO_PORT5 86 +#define IRQ_U300_GPIO_PORT6 87 +#define U300_VIC_IRQS_END 88 #endif diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 070629a..33631c9 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -7,9 +7,8 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> #include <plat/ste_dma40.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index a267c6d..c34d4ef 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -9,10 +9,9 @@ #include <linux/bug.h> #include <linux/string.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index e4dad22..e6ad1614 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-nomadik.h> +#include <linux/platform_data/db8500_thermal.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> @@ -36,13 +37,13 @@ #include <linux/of_platform.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> #include <plat/ste_dma40.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -228,6 +229,67 @@ static struct ab8500_platform_data ab8500_platdata = { }; /* + * Thermal Sensor + */ + +static struct resource db8500_thsens_resources[] = { + { + .name = "IRQ_HOTMON_LOW", + .start = IRQ_PRCMU_HOTMON_LOW, + .end = IRQ_PRCMU_HOTMON_LOW, + .flags = IORESOURCE_IRQ, + }, + { + .name = "IRQ_HOTMON_HIGH", + .start = IRQ_PRCMU_HOTMON_HIGH, + .end = IRQ_PRCMU_HOTMON_HIGH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct db8500_thsens_platform_data db8500_thsens_data = { + .trip_points[0] = { + .temp = 70000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[1] = { + .temp = 75000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[2] = { + .temp = 80000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[3] = { + .temp = 85000, + .type = THERMAL_TRIP_CRITICAL, + }, + .num_trips = 4, +}; + +static struct platform_device u8500_thsens_device = { + .name = "db8500-thermal", + .resource = db8500_thsens_resources, + .num_resources = ARRAY_SIZE(db8500_thsens_resources), + .dev = { + .platform_data = &db8500_thsens_data, + }, +}; + +static struct platform_device u8500_cpufreq_cooling_device = { + .name = "db8500-cpufreq-cooling", +}; + +/* * TPS61052 */ @@ -582,6 +644,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, + &u8500_thsens_device, + &u8500_cpufreq_cooling_device, }; static void __init mop500_init_machine(void) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 50202a1..5c5ad70 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -18,11 +18,11 @@ #include <linux/io.h> #include <linux/mfd/abx500/ab8500.h> #include <linux/platform_data/usb-musb-ux500.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <linux/random.h> #include <asm/pmu.h> #include <asm/mach/map.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> @@ -159,7 +159,7 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); - dbx500_add_pinctrl(parent, "pinctrl-db8500"); + dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); } static int usb_db8500_rx_dma_cfg[] = { @@ -217,9 +217,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) db8500_add_gpios(parent); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -239,9 +236,6 @@ struct device * __init u8500_of_init_devices(void) db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - u8500_dma40_device.dev.parent = parent; /* diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index dfdd4a5..692a77a 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -11,8 +11,7 @@ #include <linux/irq.h> #include <linux/slab.h> #include <linux/platform_device.h> - -#include <plat/gpio-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 7fbf0ba..96fa4ac 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -129,12 +129,18 @@ void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, int irq, struct nmk_gpio_platform_data *pdata); static inline void -dbx500_add_pinctrl(struct device *parent, const char *name) +dbx500_add_pinctrl(struct device *parent, const char *name, + resource_size_t base) { + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_8K), + }; struct platform_device_info pdevinfo = { .parent = parent, .name = name, .id = -1, + .res = res, + .num_res = ARRAY_SIZE(res), }; platform_device_register_full(&pdevinfo); diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 4e168e8..011661a 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -425,7 +425,7 @@ void __init v2m_dt_init_early(void) vexpress_sysreg_of_early_init(); /* Confirm board type against DT property, if available */ - if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { + if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); if (WARN_ON(dt_hbi != hbi)) diff --git a/arch/arm/mach-vt8500/include/mach/hardware.h b/arch/arm/mach-vt8500/include/mach/hardware.h deleted file mode 100644 index db4163f..0000000 --- a/arch/arm/mach-vt8500/include/mach/hardware.h +++ /dev/null @@ -1,12 +0,0 @@ -/* arch/arm/mach-vt8500/include/mach/hardware.h - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ diff --git a/arch/arm/mach-vt8500/include/mach/i8042.h b/arch/arm/mach-vt8500/include/mach/i8042.h deleted file mode 100644 index cd7143c..0000000 --- a/arch/arm/mach-vt8500/include/mach/i8042.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-vt8500/include/mach/i8042.h - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -extern unsigned long wmt_i8042_base __initdata; -extern int wmt_i8042_kbd_irq; -extern int wmt_i8042_aux_irq; diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h deleted file mode 100644 index 7389795..0000000 --- a/arch/arm/mach-vt8500/include/mach/restart.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-vt8500/restart.h - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -void vt8500_setup_restart(void); -void vt8500_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c index 050e183..3dd21a4 100644 --- a/arch/arm/mach-vt8500/timer.c +++ b/arch/arm/mach-vt8500/timer.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-vt8500/timer_dt.c + * arch/arm/mach-vt8500/timer.c * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 8d3871f..a5bd286 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -31,8 +31,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <mach/restart.h> - #include "common.h" #define LEGACY_GPIO_BASE 0xD8110000 diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index ab5cfdd..ba8d14f 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -31,7 +31,6 @@ #include <asm/hardware/cache-l2x0.h> #include <mach/zynq_soc.h> -#include <mach/clkdev.h> #include "common.h" static struct of_device_id zynq_of_bus_ids[] __initdata = { @@ -45,22 +44,25 @@ static struct of_device_id zynq_of_bus_ids[] __initdata = { */ static void __init xilinx_init_machine(void) { -#ifdef CONFIG_CACHE_L2X0 /* * 64KB way size, 8-way associativity, parity disabled */ - l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF); -#endif + l2x0_of_init(0x02060000, 0xF0F0FFFF); of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); } +static struct of_device_id irq_match[] __initdata = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + { } +}; + /** * xilinx_irq_init() - Interrupt controller initialization for the GIC. */ static void __init xilinx_irq_init(void) { - gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE); + of_irq_init(irq_match); } /* The minimum devices needed to be mapped before the VM system is up and @@ -71,17 +73,12 @@ static struct map_desc io_desc[] __initdata = { { .virtual = TTC0_VIRT, .pfn = __phys_to_pfn(TTC0_PHYS), - .length = SZ_4K, + .length = TTC0_SIZE, .type = MT_DEVICE, }, { .virtual = SCU_PERIPH_VIRT, .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), - .length = SZ_8K, - .type = MT_DEVICE, - }, { - .virtual = PL310_L2CC_VIRT, - .pfn = __phys_to_pfn(PL310_L2CC_PHYS), - .length = SZ_4K, + .length = SCU_PERIPH_SIZE, .type = MT_DEVICE, }, @@ -89,7 +86,7 @@ static struct map_desc io_desc[] __initdata = { { .virtual = UART0_VIRT, .pfn = __phys_to_pfn(UART0_PHYS), - .length = SZ_4K, + .length = UART0_SIZE, .type = MT_DEVICE, }, #endif diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h deleted file mode 100644 index c6e73d8..0000000 --- a/arch/arm/mach-zynq/include/mach/clkdev.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-zynq/include/mach/clkdev.h - * - * Copyright (C) 2011 Xilinx, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#include <plat/clock.h> - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - const struct icst_params *params; - void __iomem *vcoreg; -}; - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h index d0d3f8f..1b8bf0e 100644 --- a/arch/arm/mach-zynq/include/mach/zynq_soc.h +++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h @@ -15,33 +15,32 @@ #ifndef __MACH_XILINX_SOC_H__ #define __MACH_XILINX_SOC_H__ +#include <asm/pgtable.h> + #define PERIPHERAL_CLOCK_RATE 2500000 -/* For now, all mappings are flat (physical = virtual) +/* Static peripheral mappings are mapped at the top of the vmalloc region. The + * early uart mapping causes intermediate problems/failure at certain + * addresses, including the very top of the vmalloc region. Map it at an + * address that is known to work. */ -#define UART0_PHYS 0xE0000000 -#define UART0_VIRT UART0_PHYS - -#define TTC0_PHYS 0xF8001000 -#define TTC0_VIRT TTC0_PHYS +#define UART0_PHYS 0xE0000000 +#define UART0_SIZE SZ_4K +#define UART0_VIRT 0xF0001000 -#define PL310_L2CC_PHYS 0xF8F02000 -#define PL310_L2CC_VIRT PL310_L2CC_PHYS +#define TTC0_PHYS 0xF8001000 +#define TTC0_SIZE SZ_4K +#define TTC0_VIRT (VMALLOC_END - TTC0_SIZE) -#define SCU_PERIPH_PHYS 0xF8F00000 -#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS +#define SCU_PERIPH_PHYS 0xF8F00000 +#define SCU_PERIPH_SIZE SZ_8K +#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE) /* The following are intended for the devices that are mapped early */ #define TTC0_BASE IOMEM(TTC0_VIRT) #define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT) -#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100) -#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000) -#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT) -/* - * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical - */ #define LL_UART_PADDR UART0_PHYS #define LL_UART_VADDR UART0_VIRT diff --git a/arch/arm/mm/cache-aurora-l2.h b/arch/arm/mm/cache-aurora-l2.h new file mode 100644 index 0000000..c861247 --- /dev/null +++ b/arch/arm/mm/cache-aurora-l2.h @@ -0,0 +1,55 @@ +/* + * AURORA shared L2 cache controller support + * + * Copyright (C) 2012 Marvell + * + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_HARDWARE_AURORA_L2_H +#define __ASM_ARM_HARDWARE_AURORA_L2_H + +#define AURORA_SYNC_REG 0x700 +#define AURORA_RANGE_BASE_ADDR_REG 0x720 +#define AURORA_FLUSH_PHY_ADDR_REG 0x7f0 +#define AURORA_INVAL_RANGE_REG 0x774 +#define AURORA_CLEAN_RANGE_REG 0x7b4 +#define AURORA_FLUSH_RANGE_REG 0x7f4 + +#define AURORA_ACR_REPLACEMENT_OFFSET 27 +#define AURORA_ACR_REPLACEMENT_MASK \ + (0x3 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_WAYRR \ + (0 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_LFSR \ + (1 << AURORA_ACR_REPLACEMENT_OFFSET) +#define AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU \ + (3 << AURORA_ACR_REPLACEMENT_OFFSET) + +#define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET 0 +#define AURORA_ACR_FORCE_WRITE_POLICY_MASK \ + (0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_POLICY_DIS \ + (0 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_BACK_POLICY \ + (1 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) +#define AURORA_ACR_FORCE_WRITE_THRO_POLICY \ + (2 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET) + +#define MAX_RANGE_SIZE 1024 + +#define AURORA_WAY_SIZE_SHIFT 2 + +#define AURORA_CTRL_FW 0x100 + +/* chose a number outside L2X0_CACHE_ID_PART_MASK to be sure to make + * the distinction between a number coming from hardware and a number + * coming from the device tree */ +#define AURORA_CACHE_ID 0x100 + +#endif /* __ASM_ARM_HARDWARE_AURORA_L2_H */ diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 8a97e64..6911b8b 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -25,6 +25,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#include "cache-aurora-l2.h" #define CACHE_LINE_SIZE 32 @@ -34,14 +35,20 @@ static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; +/* Aurora don't have the cache ID register available, so we have to + * pass it though the device tree */ +static u32 cache_id_part_number_from_dt; + struct l2x0_regs l2x0_saved_regs; struct l2x0_of_data { void (*setup)(const struct device_node *, u32 *, u32 *); void (*save)(void); - void (*resume)(void); + struct outer_cache_fns outer_cache; }; +static bool of_init = false; + static inline void cache_wait_way(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ @@ -168,7 +175,7 @@ static void l2x0_inv_all(void) /* invalidate all ways */ raw_spin_lock_irqsave(&l2x0_lock, flags); /* Invalidating when L2 is enabled is a nono */ - BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1); + BUG_ON(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); cache_sync(); @@ -292,11 +299,18 @@ static void l2x0_unlock(u32 cache_id) int lockregs; int i; - if (cache_id == L2X0_CACHE_ID_PART_L310) + switch (cache_id) { + case L2X0_CACHE_ID_PART_L310: lockregs = 8; - else + break; + case AURORA_CACHE_ID: + lockregs = 4; + break; + default: /* L210 and unknown types */ lockregs = 1; + break; + } for (i = 0; i < lockregs; i++) { writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + @@ -312,18 +326,22 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) u32 cache_id; u32 way_size = 0; int ways; + int way_size_shift = L2X0_WAY_SIZE_SHIFT; const char *type; l2x0_base = base; - - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); + if (cache_id_part_number_from_dt) + cache_id = cache_id_part_number_from_dt; + else + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID) + & L2X0_CACHE_ID_PART_MASK; aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; /* Determine the number of ways */ - switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + switch (cache_id) { case L2X0_CACHE_ID_PART_L310: if (aux & (1 << 16)) ways = 16; @@ -340,6 +358,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) ways = (aux >> 13) & 0xf; type = "L210"; break; + + case AURORA_CACHE_ID: + sync_reg_offset = AURORA_SYNC_REG; + ways = (aux >> 13) & 0xf; + ways = 2 << ((ways + 1) >> 2); + way_size_shift = AURORA_WAY_SIZE_SHIFT; + type = "Aurora"; + break; default: /* Assume unknown chips have 8 ways */ ways = 8; @@ -353,7 +379,8 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) * L2 cache Size = Way size * Number of ways */ way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17; - way_size = 1 << (way_size + 3); + way_size = 1 << (way_size + way_size_shift); + l2x0_size = ways * way_size * SZ_1K; /* @@ -361,7 +388,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) * If you are booting from non-secure mode * accessing the below registers will fault. */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* Make sure that I&D is not locked down when starting */ l2x0_unlock(cache_id); @@ -371,7 +398,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) l2x0_inv_all(); /* enable L2X0 */ - writel_relaxed(1, l2x0_base + L2X0_CTRL); + writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); } /* Re-read it in case some bits are reserved. */ @@ -380,13 +407,15 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) /* Save the value for resuming. */ l2x0_saved_regs.aux_ctrl = aux; - outer_cache.inv_range = l2x0_inv_range; - outer_cache.clean_range = l2x0_clean_range; - outer_cache.flush_range = l2x0_flush_range; - outer_cache.sync = l2x0_cache_sync; - outer_cache.flush_all = l2x0_flush_all; - outer_cache.inv_all = l2x0_inv_all; - outer_cache.disable = l2x0_disable; + if (!of_init) { + outer_cache.inv_range = l2x0_inv_range; + outer_cache.clean_range = l2x0_clean_range; + outer_cache.flush_range = l2x0_flush_range; + outer_cache.sync = l2x0_cache_sync; + outer_cache.flush_all = l2x0_flush_all; + outer_cache.inv_all = l2x0_inv_all; + outer_cache.disable = l2x0_disable; + } printk(KERN_INFO "%s cache controller enabled\n", type); printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", @@ -394,6 +423,100 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) } #ifdef CONFIG_OF +static int l2_wt_override; + +/* + * Note that the end addresses passed to Linux primitives are + * noninclusive, while the hardware cache range operations use + * inclusive start and end addresses. + */ +static unsigned long calc_range_end(unsigned long start, unsigned long end) +{ + /* + * Limit the number of cache lines processed at once, + * since cache range operations stall the CPU pipeline + * until completion. + */ + if (end > start + MAX_RANGE_SIZE) + end = start + MAX_RANGE_SIZE; + + /* + * Cache range operations can't straddle a page boundary. + */ + if (end > PAGE_ALIGN(start+1)) + end = PAGE_ALIGN(start+1); + + return end; +} + +/* + * Make sure 'start' and 'end' reference the same page, as L2 is PIPT + * and range operations only do a TLB lookup on the start address. + */ +static void aurora_pa_range(unsigned long start, unsigned long end, + unsigned long offset) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2x0_lock, flags); + writel(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG); + writel(end, l2x0_base + offset); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + cache_sync(); +} + +static void aurora_inv_range(unsigned long start, unsigned long end) +{ + /* + * round start and end adresses up to cache line size + */ + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + + /* + * Invalidate all full cache lines between 'start' and 'end'. + */ + while (start < end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_INVAL_RANGE_REG); + start = range_end; + } +} + +static void aurora_clean_range(unsigned long start, unsigned long end) +{ + /* + * If L2 is forced to WT, the L2 will always be clean and we + * don't need to do anything here. + */ + if (!l2_wt_override) { + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + while (start != end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_CLEAN_RANGE_REG); + start = range_end; + } + } +} + +static void aurora_flush_range(unsigned long start, unsigned long end) +{ + if (!l2_wt_override) { + start &= ~(CACHE_LINE_SIZE - 1); + end = ALIGN(end, CACHE_LINE_SIZE); + while (start != end) { + unsigned long range_end = calc_range_end(start, end); + aurora_pa_range(start, range_end - CACHE_LINE_SIZE, + AURORA_FLUSH_RANGE_REG); + start = range_end; + } + } +} + static void __init l2x0_of_setup(const struct device_node *np, u32 *aux_val, u32 *aux_mask) { @@ -491,9 +614,15 @@ static void __init pl310_save(void) } } +static void aurora_save(void) +{ + l2x0_saved_regs.ctrl = readl_relaxed(l2x0_base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); +} + static void l2x0_resume(void) { - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* restore aux ctrl and enable l2 */ l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); @@ -502,7 +631,7 @@ static void l2x0_resume(void) l2x0_inv_all(); - writel_relaxed(1, l2x0_base + L2X0_CTRL); + writel_relaxed(L2X0_CTRL_EN, l2x0_base + L2X0_CTRL); } } @@ -510,7 +639,7 @@ static void pl310_resume(void) { u32 l2x0_revision; - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { /* restore pl310 setup */ writel_relaxed(l2x0_saved_regs.tag_latency, l2x0_base + L2X0_TAG_LATENCY_CTRL); @@ -536,22 +665,108 @@ static void pl310_resume(void) l2x0_resume(); } +static void aurora_resume(void) +{ + if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + writel(l2x0_saved_regs.aux_ctrl, l2x0_base + L2X0_AUX_CTRL); + writel(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL); + } +} + +static void __init aurora_broadcast_l2_commands(void) +{ + __u32 u; + /* Enable Broadcasting of cache commands to L2*/ + __asm__ __volatile__("mrc p15, 1, %0, c15, c2, 0" : "=r"(u)); + u |= AURORA_CTRL_FW; /* Set the FW bit */ + __asm__ __volatile__("mcr p15, 1, %0, c15, c2, 0\n" : : "r"(u)); + isb(); +} + +static void __init aurora_of_setup(const struct device_node *np, + u32 *aux_val, u32 *aux_mask) +{ + u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU; + u32 mask = AURORA_ACR_REPLACEMENT_MASK; + + of_property_read_u32(np, "cache-id-part", + &cache_id_part_number_from_dt); + + /* Determine and save the write policy */ + l2_wt_override = of_property_read_bool(np, "wt-override"); + + if (l2_wt_override) { + val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY; + mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + static const struct l2x0_of_data pl310_data = { - pl310_of_setup, - pl310_save, - pl310_resume, + .setup = pl310_of_setup, + .save = pl310_save, + .outer_cache = { + .resume = pl310_resume, + .inv_range = l2x0_inv_range, + .clean_range = l2x0_clean_range, + .flush_range = l2x0_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + .set_debug = pl310_set_debug, + }, }; static const struct l2x0_of_data l2x0_data = { - l2x0_of_setup, - NULL, - l2x0_resume, + .setup = l2x0_of_setup, + .save = NULL, + .outer_cache = { + .resume = l2x0_resume, + .inv_range = l2x0_inv_range, + .clean_range = l2x0_clean_range, + .flush_range = l2x0_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + }, +}; + +static const struct l2x0_of_data aurora_with_outer_data = { + .setup = aurora_of_setup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + .inv_range = aurora_inv_range, + .clean_range = aurora_clean_range, + .flush_range = aurora_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + }, +}; + +static const struct l2x0_of_data aurora_no_outer_data = { + .setup = aurora_of_setup, + .save = aurora_save, + .outer_cache = { + .resume = aurora_resume, + }, }; static const struct of_device_id l2x0_ids[] __initconst = { { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, + { .compatible = "marvell,aurora-system-cache", + .data = (void *)&aurora_no_outer_data}, + { .compatible = "marvell,aurora-outer-cache", + .data = (void *)&aurora_with_outer_data}, {} }; @@ -577,17 +792,24 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data = of_match_node(l2x0_ids, np)->data; /* L2 configuration can only be changed if the cache is disabled */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { if (data->setup) data->setup(np, &aux_val, &aux_mask); + + /* For aurora cache in no outer mode select the + * correct mode using the coprocessor*/ + if (data == &aurora_no_outer_data) + aurora_broadcast_l2_commands(); } if (data->save) data->save(); + of_init = true; l2x0_init(l2x0_base, aux_val, aux_mask); - outer_cache.resume = data->resume; + memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); + return 0; } #endif diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 4e07eec..bc4a5e9 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -2,6 +2,9 @@ * linux/arch/arm/mm/context.c * * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved. + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,14 +17,40 @@ #include <linux/percpu.h> #include <asm/mmu_context.h> +#include <asm/smp_plat.h> #include <asm/thread_notify.h> #include <asm/tlbflush.h> +/* + * On ARMv6, we have the following structure in the Context ID: + * + * 31 7 0 + * +-------------------------+-----------+ + * | process ID | ASID | + * +-------------------------+-----------+ + * | context ID | + * +-------------------------------------+ + * + * The ASID is used to tag entries in the CPU caches and TLBs. + * The context ID is used by debuggers and trace logic, and + * should be unique within all running processes. + */ +#define ASID_FIRST_VERSION (1ULL << ASID_BITS) +#define NUM_USER_ASIDS (ASID_FIRST_VERSION - 1) + +#define ASID_TO_IDX(asid) ((asid & ~ASID_MASK) - 1) +#define IDX_TO_ASID(idx) ((idx + 1) & ~ASID_MASK) + static DEFINE_RAW_SPINLOCK(cpu_asid_lock); -unsigned int cpu_last_asid = ASID_FIRST_VERSION; +static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION); +static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS); + +static DEFINE_PER_CPU(atomic64_t, active_asids); +static DEFINE_PER_CPU(u64, reserved_asids); +static cpumask_t tlb_flush_pending; #ifdef CONFIG_ARM_LPAE -void cpu_set_reserved_ttbr0(void) +static void cpu_set_reserved_ttbr0(void) { unsigned long ttbl = __pa(swapper_pg_dir); unsigned long ttbh = 0; @@ -37,7 +66,7 @@ void cpu_set_reserved_ttbr0(void) isb(); } #else -void cpu_set_reserved_ttbr0(void) +static void cpu_set_reserved_ttbr0(void) { u32 ttb; /* Copy TTBR1 into TTBR0 */ @@ -84,124 +113,104 @@ static int __init contextidr_notifier_init(void) arch_initcall(contextidr_notifier_init); #endif -/* - * We fork()ed a process, and we need a new context for the child - * to run in. - */ -void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) +static void flush_context(unsigned int cpu) { - mm->context.id = 0; - raw_spin_lock_init(&mm->context.id_lock); -} + int i; + u64 asid; + + /* Update the list of reserved ASIDs and the ASID bitmap. */ + bitmap_clear(asid_map, 0, NUM_USER_ASIDS); + for_each_possible_cpu(i) { + if (i == cpu) { + asid = 0; + } else { + asid = atomic64_xchg(&per_cpu(active_asids, i), 0); + __set_bit(ASID_TO_IDX(asid), asid_map); + } + per_cpu(reserved_asids, i) = asid; + } -static void flush_context(void) -{ - cpu_set_reserved_ttbr0(); - local_flush_tlb_all(); - if (icache_is_vivt_asid_tagged()) { + /* Queue a TLB invalidate and flush the I-cache if necessary. */ + if (!tlb_ops_need_broadcast()) + cpumask_set_cpu(cpu, &tlb_flush_pending); + else + cpumask_setall(&tlb_flush_pending); + + if (icache_is_vivt_asid_tagged()) __flush_icache_all(); - dsb(); - } } -#ifdef CONFIG_SMP +static int is_reserved_asid(u64 asid) +{ + int cpu; + for_each_possible_cpu(cpu) + if (per_cpu(reserved_asids, cpu) == asid) + return 1; + return 0; +} -static void set_mm_context(struct mm_struct *mm, unsigned int asid) +static void new_context(struct mm_struct *mm, unsigned int cpu) { - unsigned long flags; + u64 asid = mm->context.id; + u64 generation = atomic64_read(&asid_generation); - /* - * Locking needed for multi-threaded applications where the - * same mm->context.id could be set from different CPUs during - * the broadcast. This function is also called via IPI so the - * mm->context.id_lock has to be IRQ-safe. - */ - raw_spin_lock_irqsave(&mm->context.id_lock, flags); - if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) { + if (asid != 0 && is_reserved_asid(asid)) { /* - * Old version of ASID found. Set the new one and - * reset mm_cpumask(mm). + * Our current ASID was active during a rollover, we can + * continue to use it and this was just a false alarm. */ - mm->context.id = asid; + asid = generation | (asid & ~ASID_MASK); + } else { + /* + * Allocate a free ASID. If we can't find one, take a + * note of the currently active ASIDs and mark the TLBs + * as requiring flushes. + */ + asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS); + if (asid == NUM_USER_ASIDS) { + generation = atomic64_add_return(ASID_FIRST_VERSION, + &asid_generation); + flush_context(cpu); + asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS); + } + __set_bit(asid, asid_map); + asid = generation | IDX_TO_ASID(asid); cpumask_clear(mm_cpumask(mm)); } - raw_spin_unlock_irqrestore(&mm->context.id_lock, flags); - /* - * Set the mm_cpumask(mm) bit for the current CPU. - */ - cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); + mm->context.id = asid; } -/* - * Reset the ASID on the current CPU. This function call is broadcast - * from the CPU handling the ASID rollover and holding cpu_asid_lock. - */ -static void reset_context(void *info) +void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) { - unsigned int asid; + unsigned long flags; unsigned int cpu = smp_processor_id(); - struct mm_struct *mm = current->active_mm; - smp_rmb(); - asid = cpu_last_asid + cpu + 1; + if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)) + __check_vmalloc_seq(mm); - flush_context(); - set_mm_context(mm, asid); - - /* set the new ASID */ - cpu_switch_mm(mm->pgd, mm); -} + /* + * Required during context switch to avoid speculative page table + * walking with the wrong TTBR. + */ + cpu_set_reserved_ttbr0(); -#else + if (!((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS) + && atomic64_xchg(&per_cpu(active_asids, cpu), mm->context.id)) + goto switch_mm_fastpath; -static inline void set_mm_context(struct mm_struct *mm, unsigned int asid) -{ - mm->context.id = asid; - cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id())); -} + raw_spin_lock_irqsave(&cpu_asid_lock, flags); + /* Check that our ASID belongs to the current generation. */ + if ((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS) + new_context(mm, cpu); -#endif + atomic64_set(&per_cpu(active_asids, cpu), mm->context.id); + cpumask_set_cpu(cpu, mm_cpumask(mm)); -void __new_context(struct mm_struct *mm) -{ - unsigned int asid; + if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) + local_flush_tlb_all(); + raw_spin_unlock_irqrestore(&cpu_asid_lock, flags); - raw_spin_lock(&cpu_asid_lock); -#ifdef CONFIG_SMP - /* - * Check the ASID again, in case the change was broadcast from - * another CPU before we acquired the lock. - */ - if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) { - cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); - raw_spin_unlock(&cpu_asid_lock); - return; - } -#endif - /* - * At this point, it is guaranteed that the current mm (with - * an old ASID) isn't active on any other CPU since the ASIDs - * are changed simultaneously via IPI. - */ - asid = ++cpu_last_asid; - if (asid == 0) - asid = cpu_last_asid = ASID_FIRST_VERSION; - - /* - * If we've used up all our ASIDs, we need - * to start a new version and flush the TLB. - */ - if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id() + 1; - flush_context(); -#ifdef CONFIG_SMP - smp_wmb(); - smp_call_function(reset_context, NULL, 1); -#endif - cpu_last_asid += NR_CPUS; - } - - set_mm_context(mm, asid); - raw_spin_unlock(&cpu_asid_lock); +switch_mm_fastpath: + cpu_switch_mm(mm->pgd, mm); } diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index ab88ed4..99db769 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -92,6 +92,9 @@ static int __init init_static_idmap(void) (long long)idmap_start, (long long)idmap_end); identity_mapping_add(idmap_pgd, idmap_start, idmap_end); + /* Flush L1 for the hardware to see this page table content */ + flush_cache_louis(); + return 0; } early_initcall(init_static_idmap); @@ -103,12 +106,15 @@ early_initcall(init_static_idmap); */ void setup_mm_for_reboot(void) { - /* Clean and invalidate L1. */ - flush_cache_all(); - /* Switch to the identity mapping. */ cpu_switch_mm(idmap_pgd, &init_mm); - /* Flush the TLB. */ +#ifdef CONFIG_CPU_HAS_ASID + /* + * We don't have a clean ASID for the identity mapping, which + * may clash with virtual addresses of the previous page tables + * and therefore potentially in the TLB. + */ local_flush_tlb_all(); +#endif } diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 5dcc2fd..88fd86c 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -47,18 +47,18 @@ int ioremap_page(unsigned long virt, unsigned long phys, } EXPORT_SYMBOL(ioremap_page); -void __check_kvm_seq(struct mm_struct *mm) +void __check_vmalloc_seq(struct mm_struct *mm) { unsigned int seq; do { - seq = init_mm.context.kvm_seq; + seq = init_mm.context.vmalloc_seq; memcpy(pgd_offset(mm, VMALLOC_START), pgd_offset_k(VMALLOC_START), sizeof(pgd_t) * (pgd_index(VMALLOC_END) - pgd_index(VMALLOC_START))); - mm->context.kvm_seq = seq; - } while (seq != init_mm.context.kvm_seq); + mm->context.vmalloc_seq = seq; + } while (seq != init_mm.context.vmalloc_seq); } #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) @@ -89,13 +89,13 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) if (!pmd_none(pmd)) { /* * Clear the PMD from the page table, and - * increment the kvm sequence so others + * increment the vmalloc sequence so others * notice this change. * * Note: this is still racy on SMP machines. */ pmd_clear(pmdp); - init_mm.context.kvm_seq++; + init_mm.context.vmalloc_seq++; /* * Free the page table, if there was one. @@ -112,8 +112,8 @@ static void unmap_area_sections(unsigned long virt, unsigned long size) * Ensure that the active_mm is up to date - we want to * catch any use-after-iounmap cases. */ - if (current->active_mm->context.kvm_seq != init_mm.context.kvm_seq) - __check_kvm_seq(current->active_mm); + if (current->active_mm->context.vmalloc_seq != init_mm.context.vmalloc_seq) + __check_vmalloc_seq(current->active_mm); flush_tlb_kernel_range(virt, end); } diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index ce8cb19..10062ce 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -11,18 +11,6 @@ #include <linux/random.h> #include <asm/cachetype.h> -static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr, - unsigned long pgoff) -{ - unsigned long base = addr & ~(SHMLBA-1); - unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1); - - if (base + off <= addr) - return base + off; - - return base - off; -} - #define COLOUR_ALIGN(addr,pgoff) \ ((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \ (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1))) @@ -69,9 +57,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, { struct mm_struct *mm = current->mm; struct vm_area_struct *vma; - unsigned long start_addr; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; /* * We only need to do colour alignment if either the I or D @@ -104,46 +92,14 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } - if (len > mm->cached_hole_size) { - start_addr = addr = mm->free_area_cache; - } else { - start_addr = addr = mm->mmap_base; - mm->cached_hole_size = 0; - } -full_search: - if (do_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (TASK_SIZE - len < addr) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != TASK_UNMAPPED_BASE) { - start_addr = addr = TASK_UNMAPPED_BASE; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (!vma || addr + len <= vma->vm_start) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - addr = vma->vm_end; - if (do_align) - addr = COLOUR_ALIGN(addr, pgoff); - } + info.flags = 0; + info.length = len; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); } unsigned long @@ -156,6 +112,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, unsigned long addr = addr0; int do_align = 0; int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; /* * We only need to do colour alignment if either the I or D @@ -187,70 +144,27 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, return addr; } - /* check if free_area_cache is useful for us */ - if (len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = mm->mmap_base; - } - - /* either no address requested or can't fit in requested address hole */ - addr = mm->free_area_cache; - if (do_align) { - unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff); - addr = base + len; - } - - /* make sure it can fit in the remaining address space */ - if (addr > len) { - vma = find_vma(mm, addr-len); - if (!vma || addr <= vma->vm_start) - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr-len); - } - - if (mm->mmap_base < len) - goto bottomup; - - addr = mm->mmap_base - len; - if (do_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - - do { - /* - * Lookup failure means no vma is above this address, - * else if new region fits below vma->vm_start, - * return with success: - */ - vma = find_vma(mm, addr); - if (!vma || addr+len <= vma->vm_start) - /* remember the address as a hint for next time */ - return (mm->free_area_cache = addr); + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = PAGE_SIZE; + info.high_limit = mm->mmap_base; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); - /* remember the largest hole we saw so far */ - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - /* try just below the current vma->vm_start */ - addr = vma->vm_start - len; - if (do_align) - addr = COLOUR_ALIGN_DOWN(addr, pgoff); - } while (len < vma->vm_start); - -bottomup: /* * A failed mmap() very likely causes application failure, * so fall back to the bottom-up function here. This scenario * can happen with large stack limits and large mmap() * allocations. */ - mm->cached_hole_size = ~0UL; - mm->free_area_cache = TASK_UNMAPPED_BASE; - addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags); - /* - * Restore the topdown base: - */ - mm->free_area_cache = mm->mmap_base; - mm->cached_hole_size = ~0UL; + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + addr = vm_unmapped_area(&info); + } return addr; } @@ -279,7 +193,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) * You really shouldn't be using read() or write() on /dev/mem. This * might go away in the future. */ -int valid_phys_addr_range(unsigned long addr, size_t size) +int valid_phys_addr_range(phys_addr_t addr, size_t size) { if (addr < PHYS_OFFSET) return 0; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 39719bb..9f06102 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -488,7 +488,7 @@ static void __init build_mem_type_table(void) #endif for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); + pteval_t v = pgprot_val(protection_map[i]); protection_map[i] = __pgprot(v | user_pgprot); } diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index b29a226..eb6aa73 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -167,6 +167,10 @@ tst r1, #L_PTE_YOUNG tstne r1, #L_PTE_PRESENT moveq r3, #0 +#ifndef CONFIG_CPU_USE_DOMAINS + tstne r1, #L_PTE_NONE + movne r3, #0 +#endif str r3, [r0] mcr p15, 0, r0, c7, c10, 1 @ flush_pte diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 86b8b48..09c5233 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area) mov pc, lr /* - * cpu_arm926_switch_mm(pgd_phys, tsk) + * cpu_v6_switch_mm(pgd_phys, tsk) * * Set the translation table base pointer to be pgd_phys * diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index fd045e7..6d98c13 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -100,7 +100,11 @@ ENTRY(cpu_v7_set_pte_ext) orrne r3, r3, #PTE_EXT_XN tst r1, #L_PTE_YOUNG - tstne r1, #L_PTE_PRESENT + tstne r1, #L_PTE_VALID +#ifndef CONFIG_CPU_USE_DOMAINS + eorne r1, r1, #L_PTE_NONE + tstne r1, #L_PTE_NONE +#endif moveq r3, #0 ARM( str r3, [r0, #2048]! ) @@ -161,11 +165,11 @@ ENDPROC(cpu_v7_set_pte_ext) * TFR EV X F I D LR S * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 1 0 110 0011 1100 .111 1101 < we want + * 01 0 110 0011 1100 .111 1101 < we want */ .align 2 .type v7_crval, #object v7_crval: - crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c + crval clear=0x2120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c .previous diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 8de0f1d..7b56386 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -65,8 +65,11 @@ ENDPROC(cpu_v7_switch_mm) */ ENTRY(cpu_v7_set_pte_ext) #ifdef CONFIG_MMU - tst r2, #L_PTE_PRESENT + tst r2, #L_PTE_VALID beq 1f + tst r3, #1 << (57 - 32) @ L_PTE_NONE + bicne r2, #L_PTE_VALID + bne 1f tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 846d279..42cc833 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -57,7 +57,7 @@ ENTRY(cpu_v7_reset) THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb - mov pc, r0 + bx r0 ENDPROC(cpu_v7_reset) .popsection diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index c641fb6..b6f305e 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -42,7 +42,7 @@ #define r_skb_hl ARM_R8 #define SCRATCH_SP_OFFSET 0 -#define SCRATCH_OFF(k) (SCRATCH_SP_OFFSET + (k)) +#define SCRATCH_OFF(k) (SCRATCH_SP_OFFSET + 4 * (k)) #define SEEN_MEM ((1 << BPF_MEMWORDS) - 1) #define SEEN_MEM_WORD(k) (1 << (k)) @@ -845,7 +845,7 @@ void bpf_jit_compile(struct sk_filter *fp) ctx.skf = fp; ctx.ret0_fp_idx = -1; - ctx.offsets = kzalloc(GFP_KERNEL, 4 * (ctx.skf->len + 1)); + ctx.offsets = kzalloc(4 * (ctx.skf->len + 1), GFP_KERNEL); if (ctx.offsets == NULL) return; @@ -864,7 +864,7 @@ void bpf_jit_compile(struct sk_filter *fp) ctx.idx += ctx.imm_count; if (ctx.imm_count) { - ctx.imms = kzalloc(GFP_KERNEL, 4 * ctx.imm_count); + ctx.imms = kzalloc(4 * ctx.imm_count, GFP_KERNEL); if (ctx.imms == NULL) goto out; } diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h deleted file mode 100644 index c08a54d..0000000 --- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); -extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); -#ifdef CONFIG_PINCTRL_NOMADIK -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -#else -static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - return -ENODEV; -} -#endif -extern int nmk_gpio_get_mode(int gpio); - -extern void nmk_gpio_wakeups_suspend(void); -extern void nmk_gpio_wakeups_resume(void); - -extern void nmk_gpio_clocks_enable(void); -extern void nmk_gpio_clocks_disable(void); - -extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h deleted file mode 100644 index 3b8ec60..0000000 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __PLAT_PINCFG_H -#define __PLAT_PINCFG_H - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); -extern int nmk_config_pins(pin_cfg_t *cfgs, int num); -extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); - -#endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 82fcb20..665870d 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -154,6 +154,12 @@ config OMAP_32K_TIMER intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5. + On OMAP2PLUS this value is only used for CONFIG_HZ and + CLOCK_TICK_RATE compile time calculation. + The actual timer selection is done in the board file + through the (DT_)MACHINE_START structure. + + config OMAP3_L2_AUX_SECURE_SAVE_RESTORE bool "OMAP3 HS/EMU save and restore for L2 AUX control register" depends on ARCH_OMAP3 && PM diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index dacaee0..8d88584 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,13 +3,12 @@ # # Common support -obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o +obj-y := sram.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := # omap_device support (OMAP2+ only at the moment) -obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o @@ -20,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c deleted file mode 100644 index 9d7ac20..0000000 --- a/arch/arm/plat-omap/clock.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * linux/arch/arm/plat-omap/clock.c - * - * Copyright (C) 2004 - 2008 Nokia corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * - * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/export.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/cpufreq.h> -#include <linux/io.h> - -#include <plat/clock.h> - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); - -static struct clk_functions *arch_clock; - -/* - * Standard clock functions defined in include/linux/clk.h - */ - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (!arch_clock || !arch_clock->clk_enable) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - if (!arch_clock || !arch_clock->clk_disable) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - pr_err("Trying disable clock %s with 0 usecount\n", - clk->name); - WARN_ON(1); - goto out; - } - - arch_clock->clk_disable(clk); - -out: - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->rate; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * Optional clock functions defined in include/linux/clk.h - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - long ret; - - if (clk == NULL || IS_ERR(clk)) - return 0; - - if (!arch_clock || !arch_clock->clk_round_rate) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_round_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_rate) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = arch_clock->clk_set_rate(clk, rate); - if (ret == 0) - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) - return ret; - - if (!arch_clock || !arch_clock->clk_set_parent) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - ret = arch_clock->clk_set_parent(clk, parent); - if (ret == 0) - propagate_rate(clk); - } else - ret = -EBUSY; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -/* - * OMAP specific clock functions shared between omap1 and omap2 - */ - -int __initdata mpurate; - -/* - * By default we use the rate set by the bootloader. - * You can override this with mpurate= cmdline option. - */ -static int __init omap_clk_setup(char *str) -{ - get_option(&str, &mpurate); - - if (!mpurate) - return 1; - - if (mpurate < 1000) - mpurate *= 1000000; - - return 1; -} -__setup("mpurate=", omap_clk_setup); - -/* Used for clocks that always have same value as the parent clock */ -unsigned long followparent_recalc(struct clk *clk) -{ - return clk->parent->rate; -} - -/* - * Used for clocks that have the same value as the parent clock, - * divided by some factor - */ -unsigned long omap_fixed_divisor_recalc(struct clk *clk) -{ - WARN_ON(!clk->fixed_div); - - return clk->parent->rate / clk->fixed_div; -} - -void clk_reparent(struct clk *child, struct clk *parent) -{ - list_del_init(&child->sibling); - if (parent) - list_add(&child->sibling, &parent->children); - child->parent = parent; - - /* now do the debugfs renaming to reattach the child - to the proper parent */ -} - -/* Propagate rate to children */ -void propagate_rate(struct clk *tclk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &tclk->children, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -static LIST_HEAD(root_clks); - -/** - * recalculate_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - * Called at init. - */ -void recalculate_root_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &root_clks, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -/** - * clk_preinit - initialize any fields in the struct clk before clk init - * @clk: struct clk * to initialize - * - * Initialize any struct clk fields needed before normal clk initialization - * can run. No return value. - */ -void clk_preinit(struct clk *clk) -{ - INIT_LIST_HEAD(&clk->children); -} - -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - /* - * trap out already registered clocks - */ - if (clk->node.next || clk->node.prev) - return 0; - - mutex_lock(&clocks_mutex); - if (clk->parent) - list_add(&clk->sibling, &clk->parent->children); - else - list_add(&clk->sibling, &root_clks); - - list_add(&clk->node, &clocks); - if (clk->init) - clk->init(clk); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->sibling); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -void clk_enable_init_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clocks, node) { - if (clkp->flags & ENABLE_ON_INIT) - clk_enable(clkp); - } -} - -int omap_clk_enable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->allow_idle) - c->ops->allow_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -int omap_clk_disable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->deny_idle) - c->ops->deny_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -/* - * Low level helpers - */ -static int clkll_enable_null(struct clk *clk) -{ - return 0; -} - -static void clkll_disable_null(struct clk *clk) -{ -} - -const struct clkops clkops_null = { - .enable = clkll_enable_null, - .disable = clkll_disable_null, -}; - -/* - * Dummy clock - * - * Used for clock aliases that are needed on some OMAPs, but not others - */ -struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_null, -}; - -/* - * - */ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -static int __init clk_disable_unused(void) -{ - struct clk *ck; - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_disable_unused) - return 0; - - pr_info("clock: disabling unused clocks to save power\n"); - - spin_lock_irqsave(&clockfw_lock, flags); - list_for_each_entry(ck, &clocks, node) { - if (ck->ops == &clkops_null) - continue; - - if (ck->usecount > 0 || !ck->enable_reg) - continue; - - arch_clock->clk_disable_unused(ck); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -late_initcall(clk_disable_unused); -late_initcall(omap_clk_enable_autoidle_all); -#endif - -int __init clk_init(struct clk_functions * custom_clocks) -{ - if (!custom_clocks) { - pr_err("No custom clock functions registered\n"); - BUG(); - } - - arch_clock = custom_clocks; - - return 0; -} - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* - * debugfs support to trace clock tree hierarchy and attributes - */ - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static struct dentry *clk_debugfs_root; - -static int clk_dbg_show_summary(struct seq_file *s, void *unused) -{ - struct clk *c; - struct clk *pa; - - mutex_lock(&clocks_mutex); - seq_printf(s, "%-30s %-30s %-10s %s\n", - "clock-name", "parent-name", "rate", "use-count"); - - list_for_each_entry(c, &clocks, node) { - pa = c->parent; - seq_printf(s, "%-30s %-30s %-10lu %d\n", - c->name, pa ? pa->name : "none", c->rate, c->usecount); - } - mutex_unlock(&clocks_mutex); - - return 0; -} - -static int clk_dbg_open(struct inode *inode, struct file *file) -{ - return single_open(file, clk_dbg_show_summary, inode->i_private); -} - -static const struct file_operations debug_clock_fops = { - .open = clk_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->parent; - - d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - - d = debugfs_create_file("summary", S_IRUGO, - d, NULL, &debug_clock_fops); - if (!d) - return -ENOMEM; - - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c deleted file mode 100644 index 111315a..0000000 --- a/arch/arm/plat-omap/common.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/arm/plat-omap/common.c - * - * Code common to all OMAP machines. - * The file is created by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/dma-mapping.h> - -#include <plat/common.h> -#include <plat/vram.h> -#include <linux/platform_data/dsp-omap.h> -#include <plat/dma.h> - -#include <plat/omap-secure.h> - -void __init omap_reserve(void) -{ - omap_vram_reserve_sdram_memblock(); - omap_dsp_reserve_sdram_memblock(); - omap_secure_ram_reserve_memblock(); - omap_barrier_reserve_memblock(); -} - -void __init omap_init_consistent_dma_size(void) -{ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); -#endif -} - -/* - * Stub function for OMAP2 so that common files - * continue to build when custom builds are used - */ -int __weak omap_secure_ram_reserve_memblock(void) -{ - return 0; -} diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 87ba8dd..f3771cd 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,9 +22,6 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <plat/common.h> -#include <plat/clock.h> - /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 5a4678e..a609e21 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -15,8 +15,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <mach/hardware.h> -#include "../mach-omap2/debug-devices.h" +#include <plat/debug-devices.h> /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index ea29bbe..aa7ebc6 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -17,16 +17,33 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <plat/fpga.h> - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the * debug board (all green), accessed through FPGA registers. */ +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + static struct h2p2_dbg_fpga __iomem *fpga; static u16 fpga_led_state; @@ -94,7 +111,7 @@ static int fpga_probe(struct platform_device *pdev) if (!iomem) return -ENODEV; - fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE); + fpga = ioremap(iomem->start, resource_size(iomem)); __raw_writew(0xff, &fpga->leds); for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) { diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c76ed8b..c288b76 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,9 +36,7 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <plat/cpu.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <plat-omap/dma-omap.h> /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA @@ -175,12 +173,13 @@ static inline void set_gdma_dev(int req, int dev) #define omap_writel(val, reg) do {} while (0) #endif +#ifdef CONFIG_ARCH_OMAP1 void omap_set_dma_priority(int lch, int dst_port, int priority) { unsigned long reg; u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { switch (dst_port) { case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ reg = OMAP_TC_OCPT1_PRIOR; @@ -203,18 +202,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) l |= (priority & 0xf) << 8; omap_writel(l, reg); } +} +#endif - if (cpu_class_is_omap2()) { - u32 ccr; +#ifdef CONFIG_ARCH_OMAP2PLUS +void omap_set_dma_priority(int lch, int dst_port, int priority) +{ + u32 ccr; - ccr = p->dma_read(CCR, lch); - if (priority) - ccr |= (1 << 6); - else - ccr &= ~(1 << 6); - p->dma_write(ccr, CCR, lch); - } + ccr = p->dma_read(CCR, lch); + if (priority) + ccr |= (1 << 6); + else + ccr &= ~(1 << 6); + p->dma_write(ccr, CCR, lch); } +#endif EXPORT_SYMBOL(omap_set_dma_priority); void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, @@ -228,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, l |= data_type; p->dma_write(l, CSDP, lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 ccr; ccr = p->dma_read(CCR, lch); @@ -244,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, p->dma_write(ccr, CCR2, lch); } - if (cpu_class_is_omap2() && dma_trigger) { + if (dma_omap2plus() && dma_trigger) { u32 val; val = p->dma_read(CCR, lch); @@ -284,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CCR2, lch); @@ -314,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) p->dma_write(w, LCH_CTRL, lch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 val; val = p->dma_read(CCR, lch); @@ -342,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode); void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 csdp; csdp = p->dma_read(CSDP, lch); @@ -355,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode); void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) { - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { + if (dma_omap1() && !dma_omap15xx()) { u32 l; l = p->dma_read(LCH_CTRL, lch); @@ -373,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CSDP, lch); @@ -415,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params); void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CSEI, lch); @@ -447,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x2; break; } @@ -463,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -487,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { l = p->dma_read(CSDP, lch); l &= ~(0x1f << 9); l |= dest_port << 9; @@ -508,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params); void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CDEI, lch); @@ -540,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -573,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -587,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch) /* disable channel interrupts */ p->dma_write(0, CICR, lch); /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -611,7 +614,7 @@ static inline void enable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); - if (cpu_class_is_omap1()) + if (dma_omap1()) l &= ~(1 << 14); /* Set the ENABLE_LNK bits */ @@ -619,7 +622,7 @@ static inline void enable_lnk(int lch) l = dma_chan[lch].next_lch | (1 << 15); #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) + if (dma_omap2plus()) if (dma_chan[lch].next_linked_ch != -1) l = dma_chan[lch].next_linked_ch | (1 << 15); #endif @@ -636,12 +639,12 @@ static inline void disable_lnk(int lch) /* Disable interrupts */ omap_disable_channel_irq(lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* Set the STOP_LNK bit */ l |= 1 << 14; } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -655,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -673,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -712,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (p->clear_lch_regs) p->clear_lch_regs(free_ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -723,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { chan->chain_id = -1; chan->next_linked_ch = -1; } @@ -731,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - if (cpu_class_is_omap1()) + if (dma_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_class_is_omap2()) + else if (dma_omap2plus()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; - if (cpu_is_omap16xx()) { + if (dma_omap16xx()) { /* If the sync device is set, configure it dynamically. */ if (dev_id != 0) { set_gdma_dev(free_ch + 1, dev_id); @@ -748,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ p->dma_write(dev_id | (1 << 10), CCR, free_ch); - } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { + } else if (dma_omap1()) { p->dma_write(dev_id, CCR, free_ch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { omap_enable_channel_irq(free_ch); omap2_enable_irq_lch(free_ch); } @@ -774,7 +777,7 @@ void omap_free_dma(int lch) } /* Disable interrupt for logical channel */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(lch); /* Disable all DMA interrupts for the channel. */ @@ -784,7 +787,7 @@ void omap_free_dma(int lch) p->dma_write(0, CCR, lch); /* Clear registers */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(lch); spin_lock_irqsave(&dma_chan_lock, flags); @@ -810,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) { u32 reg; - if (!cpu_class_is_omap2()) { + if (dma_omap1()) { printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } @@ -849,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = p->dma_read(CCR, lch); l &= ~((1 << 6) | (1 << 26)); - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -882,7 +885,7 @@ void omap_start_dma(int lch) * The CPC/CDAC register needs to be initialized to zero * before starting dma transfer. */ - if (cpu_is_omap15xx()) + if (dma_omap15xx()) p->dma_write(0, CPC, lch); else p->dma_write(0, CDAC, lch); @@ -1045,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CSAC, lch); @@ -1053,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) offset = p->dma_read(CSAC, lch); - if (!cpu_is_omap15xx()) { + if (!dma_omap15xx()) { /* * CDAC == 0 indicates that the DMA transfer on the channel has * not been started (no data has been transferred so far). @@ -1065,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = p->dma_read(CSSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); return offset; @@ -1084,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CDAC, lch); @@ -1093,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is * read before the DMA controller finished disabling the channel. */ - if (!cpu_is_omap15xx() && offset == 0) { + if (!dma_omap15xx() && offset == 0) { offset = p->dma_read(CDAC, lch); /* * CDAC == 0 indicates that the DMA transfer on the channel has @@ -1104,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = p->dma_read(CDSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); return offset; @@ -1121,7 +1124,7 @@ int omap_dma_running(void) { int lch; - if (cpu_class_is_omap1()) + if (dma_omap1()) if (omap_lcd_dma_running()) return 1; @@ -2024,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) dma_chan = d->chan; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { @@ -2036,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(ch); dma_chan[ch].dev_id = -1; @@ -2045,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) if (ch >= 6 && enable_1510_mode) continue; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* * request_irq() doesn't like dev_id (ie. ch) being * zero, so we have to kludge around this. @@ -2070,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); if (dma_irq < 0) { @@ -2089,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - /* reserve dma channels 0 and 1 in high security devices */ - if (cpu_is_omap34xx() && - (omap_type() != OMAP2_DEVICE_TYPE_GP)) { + /* reserve dma channels 0 and 1 in high security devices on 34xx */ + if (d->dev_caps & HS_CHANNELS_RESERVED) { pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); dma_chan[0].dev_id = 0; dma_chan[1].dev_id = 1; @@ -2118,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) { int dma_irq; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { char irq_name[4]; strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 938b50a..89585c2 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -35,16 +35,18 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/clk.h> #include <linux/module.h> #include <linux/io.h> #include <linux/device.h> #include <linux/err.h> #include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <plat/dmtimer.h> -#include <plat/omap-pm.h> - -#include <mach/hardware.h> static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); @@ -84,10 +86,6 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, static void omap_timer_restore_context(struct omap_dm_timer *timer) { - if (timer->revision == 1) - __raw_writel(timer->context.tistat, timer->sys_stat); - - __raw_writel(timer->context.tisr, timer->irq_stat); omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, timer->context.twer); omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, @@ -103,39 +101,38 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer) timer->context.tclr); } -static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) +static int omap_dm_timer_reset(struct omap_dm_timer *timer) { - int c; + u32 l, timeout = 100000; - if (!timer->sys_stat) - return; + if (timer->revision != 1) + return -EINVAL; - c = 0; - while (!(__raw_readl(timer->sys_stat) & 1)) { - c++; - if (c > 100000) { - printk(KERN_ERR "Timer failed to reset\n"); - return; - } - } -} + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); -static void omap_dm_timer_reset(struct omap_dm_timer *timer) -{ - omap_dm_timer_enable(timer); - if (timer->pdev->id != 1) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); - omap_dm_timer_wait_for_reset(timer); + do { + l = __omap_dm_timer_read(timer, + OMAP_TIMER_V1_SYS_STAT_OFFSET, 0); + } while (!l && timeout--); + + if (!timeout) { + dev_err(&timer->pdev->dev, "Timer failed to reset\n"); + return -ETIMEDOUT; } - __omap_dm_timer_reset(timer, 0, 0); - omap_dm_timer_disable(timer); - timer->posted = 1; + /* Configure timer for smart-idle mode */ + l = __omap_dm_timer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET, 0); + l |= 0x2 << 0x3; + __omap_dm_timer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET, l, 0); + + timer->posted = 0; + + return 0; } -int omap_dm_timer_prepare(struct omap_dm_timer *timer) +static int omap_dm_timer_prepare(struct omap_dm_timer *timer) { - int ret; + int rc; /* * FIXME: OMAP1 devices do not use the clock framework for dmtimers so @@ -150,13 +147,20 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer) } } - if (timer->capability & OMAP_TIMER_NEEDS_RESET) - omap_dm_timer_reset(timer); + omap_dm_timer_enable(timer); - ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + if (timer->capability & OMAP_TIMER_NEEDS_RESET) { + rc = omap_dm_timer_reset(timer); + if (rc) { + omap_dm_timer_disable(timer); + return rc; + } + } - timer->posted = 1; - return ret; + __omap_dm_timer_enable_posted(timer); + omap_dm_timer_disable(timer); + + return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); } static inline u32 omap_dm_timer_reserved_systimer(int id) @@ -212,6 +216,13 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) unsigned long flags; int ret = 0; + /* Requesting timer by ID is not supported when device tree is used */ + if (of_have_populated_dt()) { + pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n", + __func__); + return NULL; + } + spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(t, &omap_timer_list, node) { if (t->pdev->id == id && !t->reserved) { @@ -237,6 +248,58 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) } EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); +/** + * omap_dm_timer_request_by_cap - Request a timer by capability + * @cap: Bit mask of capabilities to match + * + * Find a timer based upon capabilities bit mask. Callers of this function + * should use the definitions found in the plat/dmtimer.h file under the + * comment "timer capabilities used in hwmod database". Returns pointer to + * timer handle on success and a NULL pointer on failure. + */ +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap) +{ + struct omap_dm_timer *timer = NULL, *t; + unsigned long flags; + + if (!cap) + return NULL; + + spin_lock_irqsave(&dm_timer_lock, flags); + list_for_each_entry(t, &omap_timer_list, node) { + if ((!t->reserved) && ((t->capability & cap) == cap)) { + /* + * If timer is not NULL, we have already found one timer + * but it was not an exact match because it had more + * capabilites that what was required. Therefore, + * unreserve the last timer found and see if this one + * is a better match. + */ + if (timer) + timer->reserved = 0; + + timer = t; + timer->reserved = 1; + + /* Exit loop early if we find an exact match */ + if (t->capability == cap) + break; + } + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + if (timer && omap_dm_timer_prepare(timer)) { + timer->reserved = 0; + timer = NULL; + } + + if (!timer) + pr_debug("%s: timer request failed!\n", __func__); + + return timer; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); + int omap_dm_timer_free(struct omap_dm_timer *timer) { if (unlikely(!timer)) @@ -271,7 +334,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer) EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); #if defined(CONFIG_ARCH_OMAP1) - +#include <mach/hardware.h> /** * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR * @inputmask: current value of idlect mask @@ -348,7 +411,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -377,9 +441,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) - timer->ctx_loss_count = - omap_pm_get_dev_context_loss_count(&timer->pdev->dev); + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + } /* * Since the register values are computed and written within @@ -388,7 +454,6 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) */ timer->context.tclr = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - timer->context.tisr = __raw_readl(timer->irq_stat); omap_dm_timer_disable(timer); return 0; } @@ -398,7 +463,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int ret; char *parent_name = NULL; - struct clk *fclk, *parent; + struct clk *parent; struct dmtimer_platform_data *pdata; if (unlikely(!timer)) @@ -414,14 +479,11 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) * use the clock framework to set the parent clock. To be removed * once OMAP1 migrated to using clock framework for dmtimers */ - if (pdata->set_timer_src) + if (pdata && pdata->set_timer_src) return pdata->set_timer_src(timer->pdev, source); - fclk = clk_get(&timer->pdev->dev, "fck"); - if (IS_ERR_OR_NULL(fclk)) { - pr_err("%s: fck not found\n", __func__); + if (!timer->fclk) return -EINVAL; - } switch (source) { case OMAP_TIMER_SRC_SYS_CLK: @@ -440,18 +502,15 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) parent = clk_get(&timer->pdev->dev, parent_name); if (IS_ERR_OR_NULL(parent)) { pr_err("%s: %s not found\n", __func__, parent_name); - ret = -EINVAL; - goto out; + return -EINVAL; } - ret = clk_set_parent(fclk, parent); + ret = clk_set_parent(timer->fclk, parent); if (IS_ERR_VALUE(ret)) pr_err("%s: failed to set %s as parent\n", __func__, parent_name); clk_put(parent); -out: - clk_put(fclk); return ret; } @@ -495,7 +554,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -533,8 +593,8 @@ int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, l |= OMAP_TIMER_CTRL_CE; else l &= ~OMAP_TIMER_CTRL_CE; - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); /* Save the context */ timer->context.tclr = l; @@ -610,6 +670,37 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, } EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); +/** + * omap_dm_timer_set_int_disable - disable timer interrupts + * @timer: pointer to timer handle + * @mask: bit mask of interrupts to be disabled + * + * Disables the specified timer interrupts for a timer. + */ +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask) +{ + u32 l = mask; + + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); + + if (timer->revision == 1) + l = __raw_readl(timer->irq_ena) & ~mask; + + __raw_writel(l, timer->irq_dis); + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask; + omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l); + + /* Save the context */ + timer->context.tier &= ~mask; + timer->context.twer &= ~mask; + omap_dm_timer_disable(timer); + return 0; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable); + unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) { unsigned int l; @@ -631,8 +722,7 @@ int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) return -EINVAL; __omap_dm_timer_write_status(timer, value); - /* Save the context */ - timer->context.tisr = value; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); @@ -695,7 +785,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct dmtimer_platform_data *pdata = pdev->dev.platform_data; - if (!pdata) { + if (!pdata && !dev->of_node) { dev_err(dev, "%s: no platform data.\n", __func__); return -ENODEV; } @@ -724,11 +814,25 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) return -ENOMEM; } - timer->id = pdev->id; + if (dev->of_node) { + if (of_find_property(dev->of_node, "ti,timer-alwon", NULL)) + timer->capability |= OMAP_TIMER_ALWON; + if (of_find_property(dev->of_node, "ti,timer-dsp", NULL)) + timer->capability |= OMAP_TIMER_HAS_DSP_IRQ; + if (of_find_property(dev->of_node, "ti,timer-pwm", NULL)) + timer->capability |= OMAP_TIMER_HAS_PWM; + if (of_find_property(dev->of_node, "ti,timer-secure", NULL)) + timer->capability |= OMAP_TIMER_SECURE; + } else { + timer->id = pdev->id; + timer->errata = pdata->timer_errata; + timer->capability = pdata->timer_capability; + timer->reserved = omap_dm_timer_reserved_systimer(timer->id); + timer->get_context_loss_count = pdata->get_context_loss_count; + } + timer->irq = irq->start; - timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; - timer->capability = pdata->timer_capability; /* Skip pm_runtime_enable for OMAP1 */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { @@ -768,7 +872,8 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(timer, &omap_timer_list, node) - if (timer->pdev->id == pdev->id) { + if (!strcmp(dev_name(&timer->pdev->dev), + dev_name(&pdev->dev))) { list_del(&timer->node); ret = 0; break; @@ -778,11 +883,18 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) return ret; } +static const struct of_device_id omap_timer_match[] = { + { .compatible = "ti,omap2-timer", }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_timer_match); + static struct platform_driver omap_dm_timer_driver = { .probe = omap_dm_timer_probe, .remove = __devexit_p(omap_dm_timer_remove), .driver = { .name = "omap_timer", + .of_match_table = of_match_ptr(omap_timer_match), }, }; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index bcbb9d5..3a77b30 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,9 +30,69 @@ #include <linux/io.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach/map.h> +#include <plat/cpu.h> + +#ifdef CONFIG_OMAP2_VRFB + +/* + * The first memory resource is the register region for VRFB, + * the rest are VRFB virtual memory areas for each VRFB context. + */ + +static const struct resource omap2_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), +}; + +static const struct resource omap3_vrfb_resources[] = { + DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"), + DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"), + DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"), + DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"), + DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"), + DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"), + DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"), + DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"), + DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"), + DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"), + DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"), + DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"), + DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"), +}; + +static int __init omap_init_vrfb(void) +{ + struct platform_device *pdev; + const struct resource *res; + unsigned int num_res; + + if (cpu_is_omap24xx()) { + res = omap2_vrfb_resources; + num_res = ARRAY_SIZE(omap2_vrfb_resources); + } else if (cpu_is_omap34xx()) { + res = omap3_vrfb_resources; + num_res = ARRAY_SIZE(omap3_vrfb_resources); + } else { + return 0; + } + + pdev = platform_device_register_resndata(NULL, "omapvrfb", -1, + res, num_res, NULL, 0); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + else + return 0; +} + +arch_initcall(omap_init_vrfb); +#endif + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static bool omapfb_lcd_configured; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a8..f9df624 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,160 +26,18 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c-omap.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> -#include <mach/irqs.h> #include <plat/i2c.h> -#include <plat/omap_device.h> -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP1_INT_I2C (32 + 4) - -static const char name[] = "omap_i2c"; - -#define I2C_RESOURCE_BUILDER(base, irq) \ - { \ - .start = (base), \ - .end = (base) + OMAP_I2C_SIZE, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = (irq), \ - .flags = IORESOURCE_IRQ, \ - }, - -static struct resource i2c_resources[][2] = { - { I2C_RESOURCE_BUILDER(0, 0) }, -}; - -#define I2C_DEV_BUILDER(bus_id, res, data) \ - { \ - .id = (bus_id), \ - .name = name, \ - .num_resources = ARRAY_SIZE(res), \ - .resource = (res), \ - .dev = { \ - .platform_data = (data), \ - }, \ - } - -#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; -static struct platform_device omap_i2c_devices[] = { - I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]), -}; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static int __init omap_i2c_nr_ports(void) -{ - int ports = 0; - - if (cpu_class_is_omap1()) - ports = 1; - else if (cpu_is_omap24xx()) - ports = 2; - else if (cpu_is_omap34xx()) - ports = 3; - else if (cpu_is_omap44xx()) - ports = 4; - - return ports; -} - -static inline int omap1_i2c_add_bus(int bus_id) -{ - struct platform_device *pdev; - struct omap_i2c_bus_platform_data *pdata; - struct resource *res; - - omap1_i2c_mux_pins(bus_id); - - pdev = &omap_i2c_devices[bus_id - 1]; - res = pdev->resource; - res[0].start = OMAP1_I2C_BASE; - res[0].end = res[0].start + OMAP_I2C_SIZE; - res[1].start = OMAP1_INT_I2C; - pdata = &i2c_pdata[bus_id - 1]; - - /* all OMAP1 have IP version 1 register set */ - pdata->rev = OMAP_I2C_IP_VERSION_1; - - /* all OMAP1 I2C are implemented like this */ - pdata->flags = OMAP_I2C_FLAG_NO_FIFO | - OMAP_I2C_FLAG_SIMPLE_CLOCK | - OMAP_I2C_FLAG_16BIT_DATA_REG | - OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; - - /* how the cpu bus is wired up differs for 7xx only */ - - if (cpu_is_omap7xx()) - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; - else - pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; - - return platform_device_register(pdev); -} - - -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline int omap2_i2c_add_bus(int bus_id) -{ - int l; - struct omap_hwmod *oh; - struct platform_device *pdev; - char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; - struct omap_i2c_bus_platform_data *pdata; - struct omap_i2c_dev_attr *dev_attr; - - omap2_i2c_mux_pins(bus_id); - - l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); - WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, - "String buffer overflow in I2C%d device setup\n", bus_id); - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -EEXIST; - } - - pdata = &i2c_pdata[bus_id - 1]; - /* - * pass the hwmod class's CPU-specific knowledge of I2C IP revision in - * use, and functionality implementation flags, up to the OMAP I2C - * driver via platform data - */ - pdata->rev = oh->class->rev; - - dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; - pdata->flags = dev_attr->flags; - - pdev = omap_device_build(name, bus_id, oh, pdata, - sizeof(struct omap_i2c_bus_platform_data), - NULL, 0, 0); - WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - - return PTR_RET(pdev); -} -#else -static inline int omap2_i2c_add_bus(int bus_id) -{ - return 0; -} -#endif - -static int __init omap_i2c_add_bus(int bus_id) -{ - if (cpu_class_is_omap1()) - return omap1_i2c_add_bus(bus_id); - else - return omap2_i2c_add_bus(bus_id); -} - /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options @@ -193,12 +51,11 @@ static int __init omap_i2c_add_bus(int bus_id) */ static int __init omap_i2c_bus_setup(char *str) { - int ports; int ints[3]; - ports = omap_i2c_nr_ports(); get_options(str, 3, ints); - if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports) + if (ints[0] < 2 || ints[1] < 1 || + ints[1] > OMAP_I2C_MAX_CONTROLLERS) return 0; i2c_pdata[ints[1] - 1].clkrate = ints[2]; i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; @@ -218,7 +75,7 @@ static int __init omap_register_i2c_bus_cmdline(void) for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++) if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) { i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - err = omap_i2c_add_bus(i + 1); + err = omap_i2c_add_bus(&i2c_pdata[i], i + 1); if (err) goto out; } @@ -243,7 +100,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, { int err; - BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports()); + BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); if (info) { err = i2c_register_board_info(bus_id, info, len); @@ -256,5 +113,5 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP; - return omap_i2c_add_bus(bus_id); + return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id); } diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h index 0a87b05..6f506ba 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/dma.h + * OMAP DMA handling defines and function * * Copyright (C) 2003 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com> @@ -23,187 +23,8 @@ #include <linux/platform_device.h> -/* - * TODO: These dma channel defines should go away once all - * the omap drivers hwmod adapted. - */ - -/* Move omap4 specific defines to dma-44xx.h */ -#include "dma-44xx.h" - #define INT_DMA_LCD 25 -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ -#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ - -/* Only for AM35xx */ -#define AM35XX_DMA_UART4_TX 54 -#define AM35XX_DMA_UART4_RX 55 - -/*----------------------------------------------------------------------------*/ - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -309,10 +130,12 @@ #define SRC_PORT BIT(0x7) #define DST_PORT BIT(0x8) #define SRC_INDEX BIT(0x9) -#define DST_INDEX BIT(0xA) -#define IS_BURST_ONLY4 BIT(0xB) -#define CLEAR_CSR_ON_READ BIT(0xC) -#define IS_WORD_16 BIT(0xD) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) /* Defines for DMA Capabilities */ #define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) @@ -449,7 +272,15 @@ struct omap_system_dma_plat_info { u32 (*dma_read)(int reg, int lch); }; -extern void __init omap_init_consistent_dma_size(void); +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 +#endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h deleted file mode 100644 index 025d85a..0000000 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * clkdev <-> OMAP integration - * - * Russell King <linux@arm.linux.org.uk> - * - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H - -#include <linux/clkdev.h> - -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -/* Platform flags for the clkdev-OMAP integration code */ -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) /* 7xx, 850 */ -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ -#define CK_242X (1 << 4) -#define CK_243X (1 << 5) /* 243x, 253x */ -#define CK_3430ES1 (1 << 6) /* 34xxES1 only */ -#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */ -#define CK_AM35XX (1 << 9) /* Sitara AM35xx */ -#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ -#define CK_443X (1 << 11) -#define CK_TI816X (1 << 12) -#define CK_446X (1 << 13) -#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */ -#define CK_1710 (1 << 15) /* 1710 extra for rate selection */ - - -#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX) - - -#endif - diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h deleted file mode 100644 index e2e2d04..0000000 --- a/arch/arm/plat-omap/include/plat/clock.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * OMAP clock: data structure definitions, function prototypes, shared macros - * - * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation - * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -#include <linux/list.h> - -struct module; -struct clk; -struct clockdomain; - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) -#define __clk_get_parent(clk) (clk->parent) -#define __clk_get_rate(clk) (clk->rate) - -/** - * struct clkops - some clock function pointers - * @enable: fn ptr that enables the current clock in hardware - * @disable: fn ptr that enables the current clock in hardware - * @find_idlest: function returning the IDLEST register for the clock's IP blk - * @find_companion: function returning the "companion" clk reg for the clock - * @allow_idle: fn ptr that enables autoidle for the current clock in hardware - * @deny_idle: fn ptr that disables autoidle for the current clock in hardware - * - * A "companion" clk is an accompanying clock to the one being queried - * that must be enabled for the IP module connected to the clock to - * become accessible by the hardware. Neither @find_idlest nor - * @find_companion should be needed; that information is IP - * block-specific; the hwmod code has been created to handle this, but - * until hwmod data is ready and drivers have been converted to use PM - * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and - * @find_companion must, unfortunately, remain. - */ -struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, - u8 *, u8 *); - void (*find_companion)(struct clk *, void __iomem **, - u8 *); - void (*allow_idle)(struct clk *); - void (*deny_idle)(struct clk *); -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -/* struct clksel_rate.flags possibilities */ -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) -#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ -#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ -#define RATE_IN_36XX (1 << 4) -#define RATE_IN_4430 (1 << 5) -#define RATE_IN_TI816X (1 << 6) -#define RATE_IN_4460 (1 << 7) -#define RATE_IN_AM33XX (1 << 8) -#define RATE_IN_TI814X (1 << 9) - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) -#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) -#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) -#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) - -/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ -#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) - - -/** - * struct clksel_rate - register bitfield values corresponding to clk divisors - * @val: register bitfield value (shifted to bit 0) - * @div: clock divisor corresponding to @val - * @flags: (see "struct clksel_rate.flags possibilities" above) - * - * @val should match the value of a read from struct clk.clksel_reg - * AND'ed with struct clk.clksel_mask, shifted right to bit 0. - * - * @div is the divisor that should be applied to the parent clock's rate - * to produce the current clock's rate. - */ -struct clksel_rate { - u32 val; - u8 div; - u16 flags; -}; - -/** - * struct clksel - available parent clocks, and a pointer to their divisors - * @parent: struct clk * to a possible parent clock - * @rates: available divisors for this parent clock - * - * A struct clksel is always associated with one or more struct clks - * and one or more struct clksel_rates. - */ -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - -/** - * struct dpll_data - DPLL registers and integration data - * @mult_div1_reg: register containing the DPLL M and N bitfields - * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg - * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg - * @clk_bypass: struct clk pointer to the clock's bypass clock input - * @clk_ref: struct clk pointer to the clock's reference clock input - * @control_reg: register containing the DPLL mode bitfield - * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() - * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() - * @max_multiplier: maximum valid non-bypass multiplier value (actual) - * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() - * @min_divider: minimum valid non-bypass divider value (actual) - * @max_divider: maximum valid non-bypass divider value (actual) - * @modes: possible values of @enable_mask - * @autoidle_reg: register containing the DPLL autoidle mode bitfield - * @idlest_reg: register containing the DPLL idle status bitfield - * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg - * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg - * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg - * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg - * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs - * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs - * @flags: DPLL type/features (see below) - * - * Possible values for @flags: - * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) - * - * @freqsel_mask is only used on the OMAP34xx family and AM35xx. - * - * XXX Some DPLLs have multiple bypass inputs, so it's not technically - * correct to only have one @clk_bypass pointer. - * - * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, - * @last_rounded_n) should be separated from the runtime-fixed fields - * and placed into a different structure, so that the runtime-fixed data - * can be placed into read-only space. - */ -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - struct clk *clk_bypass; - struct clk *clk_ref; - void __iomem *control_reg; - u32 enable_mask; - unsigned long last_rounded_rate; - u16 last_rounded_m; - u16 max_multiplier; - u8 last_rounded_n; - u8 min_divider; - u16 max_divider; - u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; - u32 autoidle_mask; - u32 freqsel_mask; - u32 idlest_mask; - u32 dco_mask; - u32 sddiv_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - u8 flags; -}; - -#endif - -/* - * struct clk.flags possibilities - * - * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. - */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) - -/** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list - * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children - * @rate: current clock rate - * @enable_reg: register to write to enable the clock (see @enable_bit) - * @recalc: fn ptr that returns the clock's current rate - * @set_rate: fn ptr that can change the clock's current rate - * @round_rate: fn ptr that can round the clock's current rate - * @init: fn ptr to do clock-specific initialization - * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled - * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div - * @flags: see "struct clk.flags possibilities" above - * @clksel_reg: for clksel clks, register va containing src/divisor select - * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector - * @clksel: for clksel clks, pointer to struct clksel for this clock - * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock - * @clkdm_name: clockdomain name that this clock is contained in - * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime - * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @clkdm, @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. - */ -struct clk { - struct list_head node; - const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ - unsigned long rate; - void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - u8 enable_bit; - s8 usecount; - u8 fixed_div; - u8 flags; -#ifdef CONFIG_ARCH_OMAP2PLUS - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; - const char *clkdm_name; - struct clockdomain *clkdm; -#else - u8 rate_offset; - u8 src_offset; -#endif -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -}; - -extern int mpurate; - -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); -extern struct clk *omap_clk_get_by_name(const char *name); -extern int omap_clk_enable_autoidle_all(void); -extern int omap_clk_disable_autoidle_all(void); - -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; - -#endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h deleted file mode 100644 index d1cb6f5..0000000 --- a/arch/arm/plat-omap/include/plat/common.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -#include <plat/i2c.h> -#include <plat/omap_hwmod.h> - -extern int __init omap_init_clocksource_32k(void __iomem *vbase); - -extern void __init omap_check_revision(void); - -extern void omap_reserve(void); -extern int omap_dss_reset(struct omap_hwmod *); - -void omap_sram_init(void); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h new file mode 100644 index 0000000..da000d4 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/counter-32k.h @@ -0,0 +1 @@ +int omap_init_clocksource_32k(void __iomem *vbase); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 67da857..b4516ab 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/cpu.h - * * OMAP cpu type detection * * Copyright (C) 2004, 2008 Nokia Corporation @@ -30,470 +28,12 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H -#ifndef __ASSEMBLY__ - -#include <linux/bitops.h> -#include <plat/multi.h> - -/* - * Omap device type i.e. EMU/HS/TST/GP/BAD - */ -#define OMAP2_DEVICE_TYPE_TEST 0 -#define OMAP2_DEVICE_TYPE_EMU 1 -#define OMAP2_DEVICE_TYPE_SEC 2 -#define OMAP2_DEVICE_TYPE_GP 3 -#define OMAP2_DEVICE_TYPE_BAD 4 - -int omap_type(void); - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 - * cpu_is_omap447x(): True for OMAP4470 - * soc_is_omap543x(): True for OMAP5430, OMAP5432 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_AM_CLASS(class, id) \ -static inline int is_am ##class (void) \ -{ \ - return (GET_AM_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff) - -#define IS_TI_CLASS(class, id) \ -static inline int is_ti ##class (void) \ -{ \ - return (GET_TI_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_TI_SUBCLASS(subclass, id) \ -static inline int is_ti ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -#define IS_AM_SUBCLASS(subclass, id) \ -static inline int is_am ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) -IS_OMAP_CLASS(24xx, 0x24) -IS_OMAP_CLASS(34xx, 0x34) -IS_OMAP_CLASS(44xx, 0x44) -IS_AM_CLASS(35xx, 0x35) -IS_OMAP_CLASS(54xx, 0x54) -IS_AM_CLASS(33xx, 0x33) - -IS_TI_CLASS(81xx, 0x81) - -IS_OMAP_SUBCLASS(242x, 0x242) -IS_OMAP_SUBCLASS(243x, 0x243) -IS_OMAP_SUBCLASS(343x, 0x343) -IS_OMAP_SUBCLASS(363x, 0x363) -IS_OMAP_SUBCLASS(443x, 0x443) -IS_OMAP_SUBCLASS(446x, 0x446) -IS_OMAP_SUBCLASS(447x, 0x447) -IS_OMAP_SUBCLASS(543x, 0x543) - -IS_TI_SUBCLASS(816x, 0x816) -IS_TI_SUBCLASS(814x, 0x814) -IS_AM_SUBCLASS(335x, 0x335) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 -#define cpu_is_ti81xx() 0 -#define cpu_is_ti816x() 0 -#define cpu_is_ti814x() 0 -#define soc_is_am35xx() 0 -#define soc_is_am33xx() 0 -#define soc_is_am335x() 0 -#define cpu_is_omap44xx() 0 -#define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 -#define cpu_is_omap447x() 0 -#define soc_is_omap54xx() 0 -#define soc_is_omap543x() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -#if defined(MULTI_OMAP2) -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() is_omap24xx() -# endif -# if defined (CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() is_omap242x() -# endif -# if defined (CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() is_omap243x() -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() -# endif -#else -# if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 -# endif -# if defined(CONFIG_SOC_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 -# endif -# if defined(CONFIG_SOC_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) -IS_OMAP_TYPE(2420, 0x2420) -IS_OMAP_TYPE(2422, 0x2422) -IS_OMAP_TYPE(2423, 0x2423) -IS_OMAP_TYPE(2430, 0x2430) -IS_OMAP_TYPE(3430, 0x3430) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 -#define cpu_is_omap3630() 0 -#define soc_is_omap5430() 0 - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#if defined(CONFIG_ARCH_OMAP2) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() -#endif - -#if defined(CONFIG_ARCH_OMAP3) -# undef cpu_is_omap3430 -# undef cpu_is_ti81xx -# undef cpu_is_ti816x -# undef cpu_is_ti814x -# undef soc_is_am35xx -# define cpu_is_omap3430() is_omap3430() -# undef cpu_is_omap3630 -# define cpu_is_omap3630() is_omap363x() -# define cpu_is_ti81xx() is_ti81xx() -# define cpu_is_ti816x() is_ti816x() -# define cpu_is_ti814x() is_ti814x() -# define soc_is_am35xx() is_am35xx() +#ifdef CONFIG_ARCH_OMAP1 +#include <mach/soc.h> #endif -# if defined(CONFIG_SOC_AM33XX) -# undef soc_is_am33xx -# undef soc_is_am335x -# define soc_is_am33xx() is_am33xx() -# define soc_is_am335x() is_am335x() +#ifdef CONFIG_ARCH_OMAP2PLUS +#include "../../mach-omap2/soc.h" #endif -# if defined(CONFIG_ARCH_OMAP4) -# undef cpu_is_omap44xx -# undef cpu_is_omap443x -# undef cpu_is_omap446x -# undef cpu_is_omap447x -# define cpu_is_omap44xx() is_omap44xx() -# define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() -# define cpu_is_omap447x() is_omap447x() -# endif - -# if defined(CONFIG_SOC_OMAP5) -# undef soc_is_omap54xx -# undef soc_is_omap543x -# define soc_is_omap54xx() is_omap54xx() -# define soc_is_omap543x() is_omap543x() -#endif - -/* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ - cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx() || \ - soc_is_am33xx()) - -/* Various silicon revisions for omap2 */ -#define OMAP242X_CLASS 0x24200024 -#define OMAP2420_REV_ES1_0 OMAP242X_CLASS -#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) - -#define OMAP243X_CLASS 0x24300024 -#define OMAP2430_REV_ES1_0 OMAP243X_CLASS - -#define OMAP343X_CLASS 0x34300034 -#define OMAP3430_REV_ES1_0 OMAP343X_CLASS -#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) -#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) -#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) -#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) -#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) - -#define OMAP363X_CLASS 0x36300034 -#define OMAP3630_REV_ES1_0 OMAP363X_CLASS -#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) -#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) - -#define TI816X_CLASS 0x81600034 -#define TI8168_REV_ES1_0 TI816X_CLASS -#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) - -#define TI814X_CLASS 0x81400034 -#define TI8148_REV_ES1_0 TI814X_CLASS -#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) -#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) - -#define AM35XX_CLASS 0x35170034 -#define AM35XX_REV_ES1_0 AM35XX_CLASS -#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) - -#define AM335X_CLASS 0x33500033 -#define AM335X_REV_ES1_0 AM335X_CLASS - -#define OMAP443X_CLASS 0x44300044 -#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) -#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) -#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) -#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) -#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) - -#define OMAP446X_CLASS 0x44600044 -#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) -#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8)) - -#define OMAP447X_CLASS 0x44700044 -#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) - -#define OMAP54XX_CLASS 0x54000054 -#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) -#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) - -void omap2xxx_check_revision(void); -void omap3xxx_check_revision(void); -void omap4xxx_check_revision(void); -void omap5xxx_check_revision(void); -void omap3xxx_check_features(void); -void ti81xx_check_features(void); -void omap4xxx_check_features(void); - -/* - * Runtime detection of OMAP3 features - * - * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip - * family have OS-level control over the I/O chain clock. This is - * to avoid a window during which wakeups could potentially be lost - * during powerdomain transitions. If this bit is set, it - * indicates that the chip does support OS-level control of this - * feature. - */ -extern u32 omap_features; - -#define OMAP3_HAS_L2CACHE BIT(0) -#define OMAP3_HAS_IVA BIT(1) -#define OMAP3_HAS_SGX BIT(2) -#define OMAP3_HAS_NEON BIT(3) -#define OMAP3_HAS_ISP BIT(4) -#define OMAP3_HAS_192MHZ_CLK BIT(5) -#define OMAP3_HAS_IO_WAKEUP BIT(6) -#define OMAP3_HAS_SDRC BIT(7) -#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) -#define OMAP4_HAS_MPU_1GHZ BIT(9) -#define OMAP4_HAS_MPU_1_2GHZ BIT(10) -#define OMAP4_HAS_MPU_1_5GHZ BIT(11) - - -#define OMAP3_HAS_FEATURE(feat,flag) \ -static inline unsigned int omap3_has_ ##feat(void) \ -{ \ - return omap_features & OMAP3_HAS_ ##flag; \ -} \ - -OMAP3_HAS_FEATURE(l2cache, L2CACHE) -OMAP3_HAS_FEATURE(sgx, SGX) -OMAP3_HAS_FEATURE(iva, IVA) -OMAP3_HAS_FEATURE(neon, NEON) -OMAP3_HAS_FEATURE(isp, ISP) -OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) -OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) -OMAP3_HAS_FEATURE(sdrc, SDRC) -OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) - -/* - * Runtime detection of OMAP4 features - */ -#define OMAP4_HAS_FEATURE(feat, flag) \ -static inline unsigned int omap4_has_ ##feat(void) \ -{ \ - return omap_features & OMAP4_HAS_ ##flag; \ -} \ - -OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) -OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) -OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) - -#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h index a4edbd2..8fc4287 100644 --- a/arch/arm/mach-omap2/debug-devices.h +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -1,9 +1,2 @@ -#ifndef _OMAP_DEBUG_DEVICES_H -#define _OMAP_DEBUG_DEVICES_H - -#include <linux/types.h> - /* for TI reference platforms sharing the same debug card */ extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h deleted file mode 100644 index 1f767cb..0000000 --- a/arch/arm/plat-omap/include/plat/dma-44xx.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * OMAP4 SDMA channel definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * Paul Walmsley (paul@pwsan.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H - -#define OMAP44XX_DMA_SYS_REQ0 2 -#define OMAP44XX_DMA_SYS_REQ1 3 -#define OMAP44XX_DMA_GPMC 4 -#define OMAP44XX_DMA_DSS_DISPC_REQ 6 -#define OMAP44XX_DMA_SYS_REQ2 7 -#define OMAP44XX_DMA_MCASP1_AXEVT 8 -#define OMAP44XX_DMA_ISS_REQ1 9 -#define OMAP44XX_DMA_ISS_REQ2 10 -#define OMAP44XX_DMA_MCASP1_AREVT 11 -#define OMAP44XX_DMA_ISS_REQ3 12 -#define OMAP44XX_DMA_ISS_REQ4 13 -#define OMAP44XX_DMA_DSS_RFBI_REQ 14 -#define OMAP44XX_DMA_SPI3_TX0 15 -#define OMAP44XX_DMA_SPI3_RX0 16 -#define OMAP44XX_DMA_MCBSP2_TX 17 -#define OMAP44XX_DMA_MCBSP2_RX 18 -#define OMAP44XX_DMA_MCBSP3_TX 19 -#define OMAP44XX_DMA_MCBSP3_RX 20 -#define OMAP44XX_DMA_C2C_SSCM_GPO0 21 -#define OMAP44XX_DMA_C2C_SSCM_GPO1 22 -#define OMAP44XX_DMA_SPI3_TX1 23 -#define OMAP44XX_DMA_SPI3_RX1 24 -#define OMAP44XX_DMA_I2C3_TX 25 -#define OMAP44XX_DMA_I2C3_RX 26 -#define OMAP44XX_DMA_I2C1_TX 27 -#define OMAP44XX_DMA_I2C1_RX 28 -#define OMAP44XX_DMA_I2C2_TX 29 -#define OMAP44XX_DMA_I2C2_RX 30 -#define OMAP44XX_DMA_MCBSP4_TX 31 -#define OMAP44XX_DMA_MCBSP4_RX 32 -#define OMAP44XX_DMA_MCBSP1_TX 33 -#define OMAP44XX_DMA_MCBSP1_RX 34 -#define OMAP44XX_DMA_SPI1_TX0 35 -#define OMAP44XX_DMA_SPI1_RX0 36 -#define OMAP44XX_DMA_SPI1_TX1 37 -#define OMAP44XX_DMA_SPI1_RX1 38 -#define OMAP44XX_DMA_SPI1_TX2 39 -#define OMAP44XX_DMA_SPI1_RX2 40 -#define OMAP44XX_DMA_SPI1_TX3 41 -#define OMAP44XX_DMA_SPI1_RX3 42 -#define OMAP44XX_DMA_SPI2_TX0 43 -#define OMAP44XX_DMA_SPI2_RX0 44 -#define OMAP44XX_DMA_SPI2_TX1 45 -#define OMAP44XX_DMA_SPI2_RX1 46 -#define OMAP44XX_DMA_MMC2_TX 47 -#define OMAP44XX_DMA_MMC2_RX 48 -#define OMAP44XX_DMA_UART1_TX 49 -#define OMAP44XX_DMA_UART1_RX 50 -#define OMAP44XX_DMA_UART2_TX 51 -#define OMAP44XX_DMA_UART2_RX 52 -#define OMAP44XX_DMA_UART3_TX 53 -#define OMAP44XX_DMA_UART3_RX 54 -#define OMAP44XX_DMA_UART4_TX 55 -#define OMAP44XX_DMA_UART4_RX 56 -#define OMAP44XX_DMA_MMC4_TX 57 -#define OMAP44XX_DMA_MMC4_RX 58 -#define OMAP44XX_DMA_MMC5_TX 59 -#define OMAP44XX_DMA_MMC5_RX 60 -#define OMAP44XX_DMA_MMC1_TX 61 -#define OMAP44XX_DMA_MMC1_RX 62 -#define OMAP44XX_DMA_SYS_REQ3 64 -#define OMAP44XX_DMA_MCPDM_UP 65 -#define OMAP44XX_DMA_MCPDM_DL 66 -#define OMAP44XX_DMA_DMIC_REQ 67 -#define OMAP44XX_DMA_C2C_SSCM_GPO2 68 -#define OMAP44XX_DMA_C2C_SSCM_GPO3 69 -#define OMAP44XX_DMA_SPI4_TX0 70 -#define OMAP44XX_DMA_SPI4_RX0 71 -#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 -#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 -#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 -#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 -#define OMAP44XX_DMA_DSS_HDMI_REQ 76 -#define OMAP44XX_DMA_MMC3_TX 77 -#define OMAP44XX_DMA_MMC3_RX 78 -#define OMAP44XX_DMA_USIM_TX 79 -#define OMAP44XX_DMA_USIM_RX 80 -#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 -#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 -#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 -#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 -#define OMAP44XX_DMA_SLIMBUS1_TX0 85 -#define OMAP44XX_DMA_SLIMBUS1_TX1 86 -#define OMAP44XX_DMA_SLIMBUS1_TX2 87 -#define OMAP44XX_DMA_SLIMBUS1_TX3 88 -#define OMAP44XX_DMA_SLIMBUS1_RX0 89 -#define OMAP44XX_DMA_SLIMBUS1_RX1 90 -#define OMAP44XX_DMA_SLIMBUS1_RX2 91 -#define OMAP44XX_DMA_SLIMBUS1_RX3 92 -#define OMAP44XX_DMA_SLIMBUS2_TX0 93 -#define OMAP44XX_DMA_SLIMBUS2_TX1 94 -#define OMAP44XX_DMA_SLIMBUS2_TX2 95 -#define OMAP44XX_DMA_SLIMBUS2_TX3 96 -#define OMAP44XX_DMA_SLIMBUS2_RX0 97 -#define OMAP44XX_DMA_SLIMBUS2_RX1 98 -#define OMAP44XX_DMA_SLIMBUS2_RX2 99 -#define OMAP44XX_DMA_SLIMBUS2_RX3 100 -#define OMAP44XX_DMA_ABE_REQ_0 101 -#define OMAP44XX_DMA_ABE_REQ_1 102 -#define OMAP44XX_DMA_ABE_REQ_2 103 -#define OMAP44XX_DMA_ABE_REQ_3 104 -#define OMAP44XX_DMA_ABE_REQ_4 105 -#define OMAP44XX_DMA_ABE_REQ_5 106 -#define OMAP44XX_DMA_ABE_REQ_6 107 -#define OMAP44XX_DMA_ABE_REQ_7 108 -#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109 -#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110 -#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111 -#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112 -#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113 -#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114 -#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115 -#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116 -#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117 -#define OMAP44XX_DMA_SHA2_CTXIN_P 118 -#define OMAP44XX_DMA_SHA2_DIN_P 119 -#define OMAP44XX_DMA_SHA2_CTXOUT_P 120 -#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121 -#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122 -#define OMAP44XX_DMA_I2C4_TX 124 -#define OMAP44XX_DMA_I2C4_RX 125 - -#endif diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 85868e9..a3fbc48 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -32,7 +32,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/platform_device.h> @@ -55,6 +54,10 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 +/* posted mode types */ +#define OMAP_TIMER_NONPOSTED 0x00 +#define OMAP_TIMER_POSTED 0x01 + /* timer capabilities used in hwmod database */ #define OMAP_TIMER_SECURE 0x80000000 #define OMAP_TIMER_ALWON 0x40000000 @@ -62,16 +65,22 @@ #define OMAP_TIMER_NEEDS_RESET 0x10000000 #define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 +/* + * timer errata flags + * + * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This + * errata prevents us from using posted mode on these devices, unless the + * timer counter register is never read. For more details please refer to + * the OMAP3/4/5 errata documents. + */ +#define OMAP_TIMER_ERRATA_I103_I767 0x80000000 + struct omap_timer_capability_dev_attr { u32 timer_capability; }; -struct omap_dm_timer; - struct timer_regs { u32 tidr; - u32 tistat; - u32 tisr; u32 tier; u32 twer; u32 tclr; @@ -90,15 +99,35 @@ struct timer_regs { u32 towr; }; -struct dmtimer_platform_data { - /* set_timer_src - Only used for OMAP1 devices */ - int (*set_timer_src)(struct platform_device *pdev, int source); - u32 timer_capability; +struct omap_dm_timer { + int id; + int irq; + struct clk *fclk; + + void __iomem *io_base; + void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ + void __iomem *irq_ena; /* irq enable */ + void __iomem *irq_dis; /* irq disable, only on v2 ip */ + void __iomem *pend; /* write pending */ + void __iomem *func_base; /* function register base */ + + unsigned long rate; + unsigned reserved:1; + unsigned posted:1; + struct timer_regs context; + int (*get_context_loss_count)(struct device *); + int ctx_loss_count; + int revision; + u32 capability; + u32 errata; + struct platform_device *pdev; + struct list_head node; }; int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap); int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); @@ -120,6 +149,7 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, i int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask); unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); @@ -245,33 +275,6 @@ int omap_dm_timers_active(void); #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) -struct omap_dm_timer { - unsigned long phys_base; - int id; - int irq; - struct clk *fclk; - - void __iomem *io_base; - void __iomem *sys_stat; /* TISTAT timer status */ - void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ - void __iomem *irq_ena; /* irq enable */ - void __iomem *irq_dis; /* irq disable, only on v2 ip */ - void __iomem *pend; /* write pending */ - void __iomem *func_base; /* function register base */ - - unsigned long rate; - unsigned reserved:1; - unsigned posted:1; - struct timer_regs context; - int ctx_loss_count; - int revision; - u32 capability; - struct platform_device *pdev; - struct list_head node; -}; - -int omap_dm_timer_prepare(struct omap_dm_timer *timer); - static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, int posted) { @@ -300,16 +303,13 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) tidr = __raw_readl(timer->io_base); if (!(tidr >> 16)) { timer->revision = 1; - timer->sys_stat = timer->io_base + - OMAP_TIMER_V1_SYS_STAT_OFFSET; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; - timer->irq_dis = NULL; + timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; timer->func_base = timer->io_base; } else { timer->revision = 2; - timer->sys_stat = NULL; timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS; timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET; timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR; @@ -320,45 +320,44 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) } } -/* Assumes the source clock has been set by caller */ -static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer, - int autoidle, int wakeup) +/* + * __omap_dm_timer_enable_posted - enables write posted mode + * @timer: pointer to timer instance handle + * + * Enables the write posted mode for the timer. When posted mode is enabled + * writes to certain timer registers are immediately acknowledged by the + * internal bus and hence prevents stalling the CPU waiting for the write to + * complete. Enabling this feature can improve performance for writing to the + * timer registers. + */ +static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) { - u32 l; + if (timer->posted) + return; - l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); - l |= 0x02 << 3; /* Set to smart-idle mode */ - l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + return; - if (autoidle) - l |= 0x1 << 0; - - if (wakeup) - l |= 1 << 2; - - __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); - - /* Match hardware reset default of posted mode */ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, - OMAP_TIMER_CTRL_POSTED, 0); + OMAP_TIMER_CTRL_POSTED, 0); + timer->context.tsicr = OMAP_TIMER_CTRL_POSTED; + timer->posted = OMAP_TIMER_POSTED; } -static inline int __omap_dm_timer_set_source(struct clk *timer_fck, - struct clk *parent) +/** + * __omap_dm_timer_override_errata - override errata flags for a timer + * @timer: pointer to timer handle + * @errata: errata flags to be ignored + * + * For a given timer, override a timer errata by clearing the flags + * specified by the errata argument. A specific erratum should only be + * overridden for a timer if the timer is used in such a way the erratum + * has no impact. + */ +static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer, + u32 errata) { - int ret; - - clk_disable(timer_fck); - ret = clk_set_parent(timer_fck, parent); - clk_enable(timer_fck); - - /* - * When the functional clock disappears, too quick writes seem - * to cause an abort. XXX Is this still necessary? - */ - __delay(300000); - - return ret; + timer->errata &= ~errata; } static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h deleted file mode 100644 index bd3c632..0000000 --- a/arch/arm/plat-omap/include/plat/fpga.h +++ /dev/null @@ -1,193 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -extern void omap1510_fpga_init_irq(void); - -#define fpga_read(reg) __raw_readb(reg) -#define fpga_write(val, reg) __raw_writeb(val, reg) - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* PA */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) - -#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 7c22b9e..7a9028c 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -18,11 +18,15 @@ * 02110-1301 USA * */ -#ifndef __ASM__ARCH_OMAP_I2C_H -#define __ASM__ARCH_OMAP_I2C_H -#include <linux/i2c.h> -#include <linux/i2c-omap.h> +#ifndef __PLAT_OMAP_I2C_H +#define __PLAT_OMAP_I2C_H + +struct i2c_board_info; +struct omap_i2c_bus_platform_data; + +int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, + int bus_id); #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, @@ -37,23 +41,7 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, } #endif -/** - * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod - * @fifo_depth: total controller FIFO size (in bytes) - * @flags: differences in hardware support capability - * - * @fifo_depth represents what exists on the hardware, not what is - * actually configured at runtime by the device driver. - */ -struct omap_i2c_dev_attr { - u8 fifo_depth; - u32 flags; -}; - -void __init omap1_i2c_mux_pins(int bus_id); -void __init omap2_i2c_mux_pins(int bus_id); - struct omap_hwmod; int omap_i2c_reset(struct omap_hwmod *oh); -#endif /* __ASM__ARCH_OMAP_I2C_H */ +#endif /* __PLAT_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h deleted file mode 100644 index 68b5f03..0000000 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ /dev/null @@ -1,221 +0,0 @@ -/* - * omap iommu: main structures - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IOMMU_H -#define __MACH_IOMMU_H - -struct iotlb_entry { - u32 da; - u32 pa; - u32 pgsz, prsvd, valid; - union { - u16 ap; - struct { - u32 endian, elsz, mixed; - }; - }; -}; - -struct omap_iommu { - const char *name; - struct module *owner; - struct clk *clk; - void __iomem *regbase; - struct device *dev; - void *isr_priv; - struct iommu_domain *domain; - - unsigned int refcount; - spinlock_t iommu_lock; /* global for this whole object */ - - /* - * We don't change iopgd for a situation like pgd for a task, - * but share it globally for each iommu. - */ - u32 *iopgd; - spinlock_t page_table_lock; /* protect iopgd */ - - int nr_tlb_entries; - - struct list_head mmap; - struct mutex mmap_lock; /* protect mmap */ - - void *ctx; /* iommu context: registres saved area */ - u32 da_start; - u32 da_end; -}; - -struct cr_regs { - union { - struct { - u16 cam_l; - u16 cam_h; - }; - u32 cam; - }; - union { - struct { - u16 ram_l; - u16 ram_h; - }; - u32 ram; - }; -}; - -struct iotlb_lock { - short base; - short vict; -}; - -/* architecture specific functions */ -struct iommu_functions { - unsigned long version; - - int (*enable)(struct omap_iommu *obj); - void (*disable)(struct omap_iommu *obj); - void (*set_twl)(struct omap_iommu *obj, bool on); - u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra); - - void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr); - void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr); - - struct cr_regs *(*alloc_cr)(struct omap_iommu *obj, - struct iotlb_entry *e); - int (*cr_valid)(struct cr_regs *cr); - u32 (*cr_to_virt)(struct cr_regs *cr); - void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); - ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr, - char *buf); - - u32 (*get_pte_attr)(struct iotlb_entry *e); - - void (*save_ctx)(struct omap_iommu *obj); - void (*restore_ctx)(struct omap_iommu *obj); - ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len); -}; - -/** - * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod - * @da_start: device address where the va space starts. - * @da_end: device address where the va space ends. - * @nr_tlb_entries: number of entries supported by the translation - * look-aside buffer (TLB). - */ -struct omap_mmu_dev_attr { - u32 da_start; - u32 da_end; - int nr_tlb_entries; -}; - -struct iommu_platform_data { - const char *name; - const char *clk_name; - const int nr_tlb_entries; - u32 da_start; - u32 da_end; -}; - -/** - * struct iommu_arch_data - omap iommu private data - * @name: name of the iommu device - * @iommu_dev: handle of the iommu device - * - * This is an omap iommu private data object, which binds an iommu user - * to its iommu device. This object should be placed at the iommu user's - * dev_archdata so generic IOMMU API can be used without having to - * utilize omap-specific plumbing anymore. - */ -struct omap_iommu_arch_data { - const char *name; - struct omap_iommu *iommu_dev; -}; - -#ifdef CONFIG_IOMMU_API -/** - * dev_to_omap_iommu() - retrieves an omap iommu object from a user device - * @dev: iommu client device - */ -static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev) -{ - struct omap_iommu_arch_data *arch_data = dev->archdata.iommu; - - return arch_data->iommu_dev; -} -#endif - -/* IOMMU errors */ -#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0) -#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1) -#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2) -#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3) -#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4) - -#if defined(CONFIG_ARCH_OMAP1) -#error "iommu for this processor not implemented yet" -#else -#include <plat/iommu2.h> -#endif - -/* - * utilities for super page(16MB, 1MB, 64KB and 4KB) - */ - -#define iopgsz_max(bytes) \ - (((bytes) >= SZ_16M) ? SZ_16M : \ - ((bytes) >= SZ_1M) ? SZ_1M : \ - ((bytes) >= SZ_64K) ? SZ_64K : \ - ((bytes) >= SZ_4K) ? SZ_4K : 0) - -#define bytes_to_iopgsz(bytes) \ - (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \ - ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \ - ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \ - ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1) - -#define iopgsz_to_bytes(iopgsz) \ - (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \ - ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \ - ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \ - ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0) - -#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0) - -/* - * global functions - */ -extern u32 omap_iommu_arch_version(void); - -extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); - -extern int -omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e); - -extern int omap_iommu_set_isr(const char *name, - int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs, - void *priv), - void *isr_priv); - -extern void omap_iommu_save_ctx(struct device *dev); -extern void omap_iommu_restore_ctx(struct device *dev); - -extern int omap_install_iommu_arch(const struct iommu_functions *ops); -extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops); - -extern int omap_foreach_iommu_device(void *data, - int (*fn)(struct device *, void *)); - -extern ssize_t -omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len); -extern size_t -omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len); - -#endif /* __MACH_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h deleted file mode 100644 index d4116b5..0000000 --- a/arch/arm/plat-omap/include/plat/iommu2.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * omap iommu: omap2 architecture specific definitions - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_IOMMU2_H -#define __MACH_IOMMU2_H - -#include <linux/io.h> - -/* - * MMU Register offsets - */ -#define MMU_REVISION 0x00 -#define MMU_SYSCONFIG 0x10 -#define MMU_SYSSTATUS 0x14 -#define MMU_IRQSTATUS 0x18 -#define MMU_IRQENABLE 0x1c -#define MMU_WALKING_ST 0x40 -#define MMU_CNTL 0x44 -#define MMU_FAULT_AD 0x48 -#define MMU_TTB 0x4c -#define MMU_LOCK 0x50 -#define MMU_LD_TLB 0x54 -#define MMU_CAM 0x58 -#define MMU_RAM 0x5c -#define MMU_GFLUSH 0x60 -#define MMU_FLUSH_ENTRY 0x64 -#define MMU_READ_CAM 0x68 -#define MMU_READ_RAM 0x6c -#define MMU_EMU_FAULT_AD 0x70 - -#define MMU_REG_SIZE 256 - -/* - * MMU Register bit definitions - */ -#define MMU_LOCK_BASE_SHIFT 10 -#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT) -#define MMU_LOCK_BASE(x) \ - ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT) - -#define MMU_LOCK_VICT_SHIFT 4 -#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT) -#define MMU_LOCK_VICT(x) \ - ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT) - -#define MMU_CAM_VATAG_SHIFT 12 -#define MMU_CAM_VATAG_MASK \ - ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT) -#define MMU_CAM_P (1 << 3) -#define MMU_CAM_V (1 << 2) -#define MMU_CAM_PGSZ_MASK 3 -#define MMU_CAM_PGSZ_1M (0 << 0) -#define MMU_CAM_PGSZ_64K (1 << 0) -#define MMU_CAM_PGSZ_4K (2 << 0) -#define MMU_CAM_PGSZ_16M (3 << 0) - -#define MMU_RAM_PADDR_SHIFT 12 -#define MMU_RAM_PADDR_MASK \ - ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT) -#define MMU_RAM_ENDIAN_SHIFT 9 -#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) -#define MMU_RAM_ELSZ_SHIFT 7 -#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT) -#define MMU_RAM_MIXED_SHIFT 6 -#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT) -#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK - -/* - * register accessors - */ -static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs) -{ - return __raw_readl(obj->regbase + offs); -} - -static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs) -{ - __raw_writel(val, obj->regbase + offs); -} - -#endif /* __MACH_IOMMU2_H */ diff --git a/arch/arm/plat-omap/include/plat/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h deleted file mode 100644 index 66a8139..0000000 --- a/arch/arm/plat-omap/include/plat/iopgtable.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * omap iommu: pagetable definitions - * - * Copyright (C) 2008-2010 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_OMAP_IOMMU_H -#define __PLAT_OMAP_IOMMU_H - -/* - * "L2 table" address mask and size definitions. - */ -#define IOPGD_SHIFT 20 -#define IOPGD_SIZE (1UL << IOPGD_SHIFT) -#define IOPGD_MASK (~(IOPGD_SIZE - 1)) - -/* - * "section" address mask and size definitions. - */ -#define IOSECTION_SHIFT 20 -#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT) -#define IOSECTION_MASK (~(IOSECTION_SIZE - 1)) - -/* - * "supersection" address mask and size definitions. - */ -#define IOSUPER_SHIFT 24 -#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT) -#define IOSUPER_MASK (~(IOSUPER_SIZE - 1)) - -#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT)) -#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32)) - -/* - * "small page" address mask and size definitions. - */ -#define IOPTE_SHIFT 12 -#define IOPTE_SIZE (1UL << IOPTE_SHIFT) -#define IOPTE_MASK (~(IOPTE_SIZE - 1)) - -/* - * "large page" address mask and size definitions. - */ -#define IOLARGE_SHIFT 16 -#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT) -#define IOLARGE_MASK (~(IOLARGE_SIZE - 1)) - -#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT)) -#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32)) - -#define IOPAGE_MASK IOPTE_MASK - -/** - * omap_iommu_translate() - va to pa translation - * @d: omap iommu descriptor - * @va: virtual address - * @mask: omap iommu descriptor mask - * - * va to pa translation - */ -static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask) -{ - return (d & mask) | (va & (~mask)); -} - -/* - * some descriptor attributes. - */ -#define IOPGD_TABLE (1 << 0) -#define IOPGD_SECTION (2 << 0) -#define IOPGD_SUPER (1 << 18 | 2 << 0) - -#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE) -#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION) -#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER) - -#define IOPTE_SMALL (2 << 0) -#define IOPTE_LARGE (1 << 0) - -#define iopte_is_small(x) (((x) & 2) == IOPTE_SMALL) -#define iopte_is_large(x) (((x) & 3) == IOPTE_LARGE) - -/* to find an entry in a page-table-directory */ -#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) -#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) - -#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) -#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd))) - -/* to find an entry in the second-level page table. */ -#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1)) -#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da)) - -static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, - u32 flags) -{ - memset(e, 0, sizeof(*e)); - - e->da = da; - e->pa = pa; - e->valid = 1; - /* FIXME: add OMAP1 support */ - e->pgsz = flags & MMU_CAM_PGSZ_MASK; - e->endian = flags & MMU_RAM_ENDIAN_MASK; - e->elsz = flags & MMU_RAM_ELSZ_MASK; - e->mixed = flags & MMU_RAM_MIXED_MASK; - - return iopgsz_to_bytes(e->pgsz); -} - -#define to_iommu(dev) \ - (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev)) - -#endif /* __PLAT_OMAP_IOMMU_H */ diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h deleted file mode 100644 index 498e57c..0000000 --- a/arch/arm/plat-omap/include/plat/iovmm.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * omap iommu: simple virtual address space management - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOMMU_MMAP_H -#define __IOMMU_MMAP_H - -#include <linux/iommu.h> - -struct iovm_struct { - struct omap_iommu *iommu; /* iommu object which this belongs to */ - u32 da_start; /* area definition */ - u32 da_end; - u32 flags; /* IOVMF_: see below */ - struct list_head list; /* linked in ascending order */ - const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ - void *va; /* mpu side mapped address */ -}; - -/* - * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma) - * - * lower 16 bit is used for h/w and upper 16 bit is for s/w. - */ -#define IOVMF_SW_SHIFT 16 - -/* - * iovma: h/w flags derived from cam and ram attribute - */ -#define IOVMF_CAM_MASK (~((1 << 10) - 1)) -#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK) - -#define IOVMF_PGSZ_MASK (3 << 0) -#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M -#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K -#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K -#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M - -#define IOVMF_ENDIAN_MASK (1 << 9) -#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG -#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE - -#define IOVMF_ELSZ_MASK (3 << 7) -#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 -#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16 -#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32 -#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE - -#define IOVMF_MIXED_MASK (1 << 6) -#define IOVMF_MIXED MMU_RAM_MIXED - -/* - * iovma: s/w flags, used for mapping and umapping internally. - */ -#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT) -#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT) -#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT) - -/* "superpages" is supported just with physically linear pages */ -#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT)) -#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT)) -#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT)) - -#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) - - -extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da); -extern u32 -omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da, - const struct sg_table *sgt, u32 flags); -extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain, - struct device *dev, u32 da); -extern u32 -omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev, - u32 da, size_t bytes, u32 flags); -extern void -omap_iommu_vfree(struct iommu_domain *domain, struct device *dev, - const u32 da); -extern void *omap_da_to_va(struct device *dev, u32 da); - -#endif /* __IOMMU_MMAP_H */ diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h deleted file mode 100644 index 25e451e..0000000 --- a/arch/arm/plat-omap/include/plat/led.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/led.h - * - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h deleted file mode 100644 index 4a970ec..0000000 --- a/arch/arm/plat-omap/include/plat/menelaus.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/menelaus.h - * - * Functions to access Menelaus power management chip - */ - -#ifndef __ASM_ARCH_MENELAUS_H -#define __ASM_ARCH_MENELAUS_H - -struct device; - -struct menelaus_platform_data { - int (* late_init)(struct device *dev); -}; - -extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data); -extern void menelaus_unregister_mmc_callback(void); -extern int menelaus_set_mmc_opendrain(int slot, int enable); -extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); - -extern int menelaus_set_vmem(unsigned int mV); -extern int menelaus_set_vio(unsigned int mV); -extern int menelaus_set_vmmc(unsigned int mV); -extern int menelaus_set_vaux(unsigned int mV); -extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); -extern int menelaus_set_slot_sel(int enable); -extern int menelaus_get_slot_pin_states(void); -extern int menelaus_set_vcore_sw(unsigned int mV); -extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); - -#define EN_VPLL_SLEEP (1 << 7) -#define EN_VMMC_SLEEP (1 << 6) -#define EN_VAUX_SLEEP (1 << 5) -#define EN_VIO_SLEEP (1 << 4) -#define EN_VMEM_SLEEP (1 << 3) -#define EN_DC3_SLEEP (1 << 2) -#define EN_DC2_SLEEP (1 << 1) -#define EN_VC_SLEEP (1 << 0) - -extern int menelaus_set_regulator_sleep(int enable, u32 val); - -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS) -#define omap_has_menelaus() 1 -#else -#define omap_has_menelaus() 0 -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h deleted file mode 100644 index 8b4e4f2..0000000 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include <linux/types.h> -#include <linux/device.h> -#include <linux/mmc/host.h> - -#include <plat/omap_hwmod.h> - -#define OMAP15XX_NR_MMC 1 -#define OMAP16XX_NR_MMC 2 -#define OMAP1_MMC_SIZE 0x080 -#define OMAP1_MMC1_BASE 0xfffb7800 -#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -#define OMAP24XX_NR_MMC 2 -#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP2_MMC1_BASE 0x4809c000 - -#define OMAP4_MMC_REG_OFFSET 0x100 - -#define OMAP_MMC_MAX_SLOTS 2 - -/* - * struct omap_mmc_dev_attr.flags possibilities - * - * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can - * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag - * should be set if this is the case. See for example Section 22.5.3 - * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia - * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). - * - * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers - * don't work correctly on some MMC controller instances on some - * OMAP3 SoCs; this flag should be set if this is the case. See - * for example Advisory 2.1.1.128 "MMC: Multiple Block Read - * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ - * Revision F (October 2010) (SPRZ278F). - */ -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) -#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) - -struct omap_mmc_dev_attr { - u8 flags; -}; - -struct omap_mmc_platform_data { - /* back-link to device */ - struct device *dev; - - /* number of slots per controller */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (*init)(struct device *dev); - void (*cleanup)(struct device *dev); - void (*shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); - - /* Integrating attributes from the omap_hwmod layer */ - u8 controller_flags; - - /* Register offset deviation */ - u16 reg_offset; - - struct omap_mmc_slot_data { - - /* - * 4/8 wires and any additional host capabilities - * need to OR'd all capabilities (ref. linux/mmc/host.h) - */ - u8 wires; /* Used for the MMC driver on omap1 and 2420 */ - u32 caps; /* Used for the MMC driver on 2430 and later */ - u32 pm_caps; /* PM capabilities of the mmc */ - - /* - * nomux means "standard" muxing is wrong on this board, and - * that board-specific code handled it before common init logic. - */ - unsigned nomux:1; - - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - - /* use the internal clock */ - unsigned internal_clock:1; - - /* nonremovable e.g. eMMC */ - unsigned nonremovable:1; - - /* Try to sleep or power off when possible */ - unsigned power_saving:1; - - /* If using power_saving and the MMC power is not to go off */ - unsigned no_off:1; - - /* eMMC does not handle power off when not in sleep state */ - unsigned no_regulator_off_init:1; - - /* Regulator off remapped to sleep */ - unsigned vcc_aux_disable_is_sleep:1; - - /* we can put the features above into this variable */ -#define HSMMC_HAS_PBIAS (1 << 0) -#define HSMMC_HAS_UPDATED_RESET (1 << 1) - unsigned features; - - int switch_pin; /* gpio (card detect) */ - int gpio_wp; /* gpio (write protect) */ - - int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (*set_power)(struct device *dev, int slot, - int power_on, int vdd); - int (*get_ro)(struct device *dev, int slot); - void (*remux)(struct device *dev, int slot, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* if we have special card, init it using this callback */ - void (*init_card)(struct mmc_card *card); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - closed - * 1 - open - */ - int (*get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (*card_detect)(struct device *dev, int slot); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, - int is_closed); - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -#else -static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ -} -#endif - -extern int omap_msdi_reset(struct omap_hwmod *oh); - -#endif diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h deleted file mode 100644 index 324d31b..0000000 --- a/arch/arm/plat-omap/include/plat/multi.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Support for compiling in multiple OMAP processors - * - * Copyright (C) 2010 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __PLAT_OMAP_MULTI_H -#define __PLAT_OMAP_MULTI_H - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2PLUS can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_SOC_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_SOC_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP4 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap4 -# endif -#endif - -#ifdef CONFIG_SOC_OMAP5 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap5 -# endif -#endif - -#ifdef CONFIG_SOC_AM33XX -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME am33xx -# endif -#endif - -#endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h deleted file mode 100644 index 0e4acd2..0000000 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __OMAP_SECURE_H__ -#define __OMAP_SECURE_H__ - -#include <linux/types.h> - -extern int omap_secure_ram_reserve_memblock(void); - -#ifdef CONFIG_OMAP4_ERRATA_I688 -extern int omap_barrier_reserve_memblock(void); -#else -static inline void omap_barrier_reserve_memblock(void) -{ } -#endif -#endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1957a85..ff9b0aa 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -30,35 +30,6 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MODE13X_SPEED 230400 - -#define OMAP_UART_SCR_TX_EMPTY 0x08 - -/* WER = 0x7F - * Enable module level wakeup in WER reg - */ -#define OMAP_UART_WER_MOD_WKUP 0X7F - -/* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 - -/* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 - -#define OMAP_UART_SYSC_RESET 0X07 -#define OMAP_UART_TCR_TRIG 0X0F -#define OMAP_UART_SW_CLR 0XF0 -#define OMAP_UART_FIFO_CLR 0X06 - -#define OMAP_UART_DMA_CH_FREE -1 - -#define OMAP_MAX_HSUART_PORTS 6 - -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - -#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) -#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) - struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ @@ -77,30 +48,4 @@ struct omap_uart_port_info { void (*enable_wakeup)(struct device *, bool); }; -struct uart_omap_dma { - u8 uart_dma_tx; - u8 uart_dma_rx; - int rx_dma_channel; - int tx_dma_channel; - dma_addr_t rx_buf_dma_phys; - dma_addr_t tx_buf_dma_phys; - unsigned int uart_base; - /* - * Buffer for rx dma.It is not required for tx because the buffer - * comes from port structure. - */ - unsigned char *rx_buf; - unsigned int prev_rx_dma_pos; - int tx_buf_size; - int tx_dma_used; - int rx_dma_used; - spinlock_t tx_lock; - spinlock_t rx_lock; - /* timer to poll activity on rx dma */ - struct timer_list rx_timer; - unsigned int rx_buf_size; - unsigned int rx_poll_rate; - unsigned int rx_timeout; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h deleted file mode 100644 index 267f43b..0000000 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/prcm.h - * - * Access definations for use in OMAP24XX clock and power management - * - * Copyright (C) 2005 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * XXX This file is deprecated. The PRCM is an OMAP2+-only subsystem, - * so this file doesn't belong in plat-omap/include/plat. Please - * do not add anything new to this file. - */ - -#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H -#define __ASM_ARM_ARCH_OMAP_PRCM_H - -u32 omap_prcm_get_reset_sources(void); -int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, - const char *name); - -#endif - - - diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h deleted file mode 100644 index 36d6a76..0000000 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ /dev/null @@ -1,164 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Tony Lindgren - * Paul Walmsley - * Richard Woodruff - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_CS_CFG 0x040 -#define SDRC_SHARING 0x044 -#define SDRC_ERR_TYPE 0x04C -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MCFG_0 0x080 -#define SDRC_MR_0 0x084 -#define SDRC_EMR2_0 0x08c -#define SDRC_ACTIM_CTRL_A_0 0x09c -#define SDRC_ACTIM_CTRL_B_0 0x0a0 -#define SDRC_RFR_CTRL_0 0x0a4 -#define SDRC_MANUAL_0 0x0a8 -#define SDRC_MCFG_1 0x0B0 -#define SDRC_MR_1 0x0B4 -#define SDRC_EMR2_1 0x0BC -#define SDRC_ACTIM_CTRL_A_1 0x0C4 -#define SDRC_ACTIM_CTRL_B_1 0x0C8 -#define SDRC_RFR_CTRL_1 0x0D4 -#define SDRC_MANUAL_1 0x0D8 - -#define SDRC_POWER_AUTOCOUNT_SHIFT 8 -#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) -#define SDRC_POWER_CLKCTRL_SHIFT 4 -#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) -#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - -#define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) -#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) -#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) -/* REVISIT: fill in other SMS registers here */ - - -#ifndef __ASSEMBLER__ - -/** - * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate - * @rate: SDRC clock rate (in Hz) - * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate - * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate - * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate - * @mr: Value to program to SDRC_MR for this rate - * - * This structure holds a pre-computed set of register values for the - * SDRC for a given SDRC clock rate and SDRAM chip. These are - * intended to be pre-computed and specified in an array in the board-*.c - * files. The structure is keyed off the 'rate' field. - */ -struct omap_sdrc_params { - unsigned long rate; - u32 actim_ctrla; - u32 actim_ctrlb; - u32 rfr_ctrl; - u32 mr; -}; - -#ifdef CONFIG_SOC_HAS_OMAP2_SDRC -void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); -#else -static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1) {}; -#endif - -int omap2_sdrc_get_params(unsigned long r, - struct omap_sdrc_params **sdrc_cs0, - struct omap_sdrc_params **sdrc_cs1); -void omap2_sms_save_context(void); -void omap2_sms_restore_context(void); - -void omap2_sms_write_rot_control(u32 val, unsigned ctx); -void omap2_sms_write_rot_size(u32 val, unsigned ctx); -void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); - -#ifdef CONFIG_ARCH_OMAP2 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - -extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); -struct omap_sdrc_params *rx51_get_sdram_timings(void); - -u32 omap2xxx_sdrc_dll_is_unlocked(void); -u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); - -#endif /* CONFIG_ARCH_OMAP2 */ - -#endif /* __ASSEMBLER__ */ - -#endif diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 227ae26..ba45250 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -1,18 +1,8 @@ -/* - * arch/arm/plat-omap/include/mach/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +int omap_sram_init(void); -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -#ifndef __ASSEMBLY__ -#include <asm/fncpy.h> +void omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached); +void omap_sram_reset(void); extern void *omap_sram_push_address(unsigned long size); @@ -24,82 +14,3 @@ extern void *omap_sram_push_address(unsigned long size); _res = fncpy(_sram_address, &(funcp), size); \ _res; \ }) - -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -extern u32 omap3_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern void omap3_sram_restore_context(void); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); -extern unsigned long omap3_sram_configure_core_dpll_sz; - -#ifdef CONFIG_PM -extern void omap_push_sram_idle(void); -#else -static inline void omap_push_sram_idle(void) {} -#endif /* CONFIG_PM */ - -#endif /* __ASSEMBLY__ */ - -/* - * OMAP2+: define the SRAM PA addresses. - * Used by the SRAM management code and the idle sleep code. - */ -#define OMAP2_SRAM_PA 0x40200000 -#define OMAP3_SRAM_PA 0x40200000 -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PA 0x40304000 -#define OMAP4_SRAM_VA 0xfe404000 -#else -#define OMAP4_SRAM_PA 0x40300000 -#endif -#define AM33XX_SRAM_PA 0x40300000 -#endif diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h deleted file mode 100644 index 7f7b112..0000000 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Rewritten by: - * Author: <source@mvista.com> - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/memory.h> -#include <asm/mach-types.h> - -#include <plat/serial.h> - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP2UART##p) - -#define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP3UART##p) - -#define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP4UART##p) - -#define DEBUG_LL_OMAP5(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP5UART##p) -/* Zoom2/3 shift is different for UART1 and external port */ -#define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) - -#define DEBUG_LL_TI81XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - TI81XXUART##p) - -#define DEBUG_LL_AM33XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - AM33XXUART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap7xx/8xx based boards using UART1 with shift 0 */ - DEBUG_LL_OMAP7XX(1, herald); - DEBUG_LL_OMAP7XX(1, omap_perseus2); - - /* omap15xx/16xx based boards using UART1 */ - DEBUG_LL_OMAP1(1, ams_delta); - DEBUG_LL_OMAP1(1, nokia770); - DEBUG_LL_OMAP1(1, omap_h2); - DEBUG_LL_OMAP1(1, omap_h3); - DEBUG_LL_OMAP1(1, omap_innovator); - DEBUG_LL_OMAP1(1, omap_osk); - DEBUG_LL_OMAP1(1, omap_palmte); - DEBUG_LL_OMAP1(1, omap_palmz71); - - /* omap15xx/16xx based boards using UART2 */ - DEBUG_LL_OMAP1(2, omap_palmtt); - - /* omap15xx/16xx based boards using UART3 */ - DEBUG_LL_OMAP1(3, sx1); - - /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap_2430sdp); - DEBUG_LL_OMAP2(1, omap_apollon); - DEBUG_LL_OMAP2(1, omap_h4); - - /* omap2 based boards using UART3 */ - DEBUG_LL_OMAP2(3, nokia_n800); - DEBUG_LL_OMAP2(3, nokia_n810); - DEBUG_LL_OMAP2(3, nokia_n810_wimax); - - /* omap3 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap3evm); - DEBUG_LL_OMAP3(1, omap_3430sdp); - DEBUG_LL_OMAP3(1, omap_3630sdp); - DEBUG_LL_OMAP3(1, omap3530_lv_som); - DEBUG_LL_OMAP3(1, omap3_torpedo); - - /* omap3 based boards using UART3 */ - DEBUG_LL_OMAP3(3, cm_t35); - DEBUG_LL_OMAP3(3, cm_t3517); - DEBUG_LL_OMAP3(3, cm_t3730); - DEBUG_LL_OMAP3(3, craneboard); - DEBUG_LL_OMAP3(3, devkit8000); - DEBUG_LL_OMAP3(3, igep0020); - DEBUG_LL_OMAP3(3, igep0030); - DEBUG_LL_OMAP3(3, nokia_rm680); - DEBUG_LL_OMAP3(3, nokia_rm696); - DEBUG_LL_OMAP3(3, nokia_rx51); - DEBUG_LL_OMAP3(3, omap3517evm); - DEBUG_LL_OMAP3(3, omap3_beagle); - DEBUG_LL_OMAP3(3, omap3_pandora); - DEBUG_LL_OMAP3(3, omap_ldp); - DEBUG_LL_OMAP3(3, overo); - DEBUG_LL_OMAP3(3, touchbook); - - /* omap4 based boards using UART3 */ - DEBUG_LL_OMAP4(3, omap_4430sdp); - DEBUG_LL_OMAP4(3, omap4_panda); - - /* omap5 based boards using UART3 */ - DEBUG_LL_OMAP5(3, omap5_sevm); - - /* zoom2/3 external uart */ - DEBUG_LL_ZOOM(omap_zoom2); - DEBUG_LL_ZOOM(omap_zoom3); - - /* TI8168 base boards using UART3 */ - DEBUG_LL_TI81XX(3, ti8168evm); - - /* TI8148 base boards using UART1 */ - DEBUG_LL_TI81XX(1, ti8148evm); - - /* AM33XX base boards using UART1 */ - DEBUG_LL_AM33XX(1, am335xevm); - } while (0); -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h deleted file mode 100644 index 87ee140..0000000 --- a/arch/arm/plat-omap/include/plat/usb.h +++ /dev/null @@ -1,179 +0,0 @@ -// include/asm-arm/mach-omap/usb.h - -#ifndef __ASM_ARCH_OMAP_USB_H -#define __ASM_ARCH_OMAP_USB_H - -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/usb/musb.h> - -#define OMAP3_HS_USB_PORTS 3 - -enum usbhs_omap_port_mode { - OMAP_USBHS_PORT_MODE_UNUSED, - OMAP_EHCI_PORT_MODE_PHY, - OMAP_EHCI_PORT_MODE_TLL, - OMAP_EHCI_PORT_MODE_HSIC, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM -}; - -struct usbhs_omap_board_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - /* have to be valid if phy_reset is true and portx is in phy mode */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* Set this to true for ES2.x silicon */ - unsigned es2_compatibility:1; - - unsigned phy_reset:1; - - /* - * Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - -#ifdef CONFIG_ARCH_OMAP2PLUS - -struct ehci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - struct regulator *regulator[OMAP3_HS_USB_PORTS]; - unsigned phy_reset:1; -}; - -struct ohci_hcd_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned es2_compatibility:1; -}; - -struct usbhs_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - struct ehci_hcd_omap_platform_data *ehci_data; - struct ohci_hcd_omap_platform_data *ohci_data; -}; - -struct usbtll_omap_platform_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; -}; -/*-------------------------------------------------------------------------*/ - -struct omap_musb_board_data { - u8 interface_type; - u8 mode; - u16 power; - unsigned extvbus:1; - void (*set_phy_power)(u8 on); - void (*clear_irq)(void); - void (*set_mode)(u8 mode); - void (*reset)(void); -}; - -enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; - -extern void usb_musb_init(struct omap_musb_board_data *board_data); - -extern void usbhs_init(const struct usbhs_omap_board_data *pdata); -extern int omap_tll_enable(void); -extern int omap_tll_disable(void); - -extern int omap4430_phy_power(struct device *dev, int ID, int on); -extern int omap4430_phy_set_clk(struct device *dev, int on); -extern int omap4430_phy_init(struct device *dev); -extern int omap4430_phy_exit(struct device *dev); -extern int omap4430_phy_suspend(struct device *dev, int suspend); - -#endif - -extern void am35x_musb_reset(void); -extern void am35x_musb_phy_power(u8 on); -extern void am35x_musb_clear_irq(void); -extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - -/* AM35x */ -/* USB 2.0 PHY Control */ -#define CONF2_PHY_GPIOMODE (1 << 23) -#define CONF2_OTGMODE (3 << 14) -#define CONF2_NO_OVERRIDE (0 << 14) -#define CONF2_FORCE_HOST (1 << 14) -#define CONF2_FORCE_DEVICE (2 << 14) -#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) -#define CONF2_SESENDEN (1 << 13) -#define CONF2_VBDTCTEN (1 << 12) -#define CONF2_REFFREQ_24MHZ (2 << 8) -#define CONF2_REFFREQ_26MHZ (7 << 8) -#define CONF2_REFFREQ_13MHZ (6 << 8) -#define CONF2_REFFREQ (0xf << 8) -#define CONF2_PHYCLKGD (1 << 7) -#define CONF2_VBUSSENSE (1 << 6) -#define CONF2_PHY_PLLON (1 << 5) -#define CONF2_RESET (1 << 4) -#define CONF2_PHYPWRDN (1 << 3) -#define CONF2_OTGPWRDN (1 << 2) -#define CONF2_DATPOL (1 << 1) - -/* TI81XX specific definitions */ -#define USBCTRL0 0x620 -#define USBSTAT0 0x624 - -/* TI816X PHY controls bits */ -#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) -#define TI816X_USBPHY_REFCLK_OSC (1 << 8) - -/* TI814X PHY controls bits */ -#define USBPHY_CM_PWRDN (1 << 0) -#define USBPHY_OTG_PWRDN (1 << 1) -#define USBPHY_CHGDET_DIS (1 << 2) -#define USBPHY_CHGDET_RSTRT (1 << 3) -#define USBPHY_SRCONDM (1 << 4) -#define USBPHY_SINKONDP (1 << 5) -#define USBPHY_CHGISINK_EN (1 << 6) -#define USBPHY_CHGVSRC_EN (1 << 7) -#define USBPHY_DMPULLUP (1 << 8) -#define USBPHY_DPPULLUP (1 << 9) -#define USBPHY_CDET_EXTCTL (1 << 10) -#define USBPHY_GPIO_MODE (1 << 12) -#define USBPHY_DPOPBUFCTL (1 << 13) -#define USBPHY_DMOPBUFCTL (1 << 14) -#define USBPHY_DPINPUT (1 << 15) -#define USBPHY_DMINPUT (1 << 16) -#define USBPHY_DPGPIO_PD (1 << 17) -#define USBPHY_DMGPIO_PD (1 << 18) -#define USBPHY_OTGVDET_EN (1 << 19) -#define USBPHY_OTGSESSEND_EN (1 << 20) -#define USBPHY_DATA_POLARITY (1 << 23) - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) -u32 omap1_usb0_init(unsigned nwires, unsigned is_device); -u32 omap1_usb1_init(unsigned nwires); -u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); -#else -static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) -{ - return 0; -} -static inline u32 omap1_usb1_init(unsigned nwires) -{ - return 0; - -} -static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h deleted file mode 100644 index 3792bde..0000000 --- a/arch/arm/plat-omap/include/plat/vrfb.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * VRFB Rotation Engine - * - * Copyright (C) 2009 Nokia Corporation - * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAP_VRFB_H__ -#define __OMAP_VRFB_H__ - -#define OMAP_VRFB_LINE_LEN 2048 - -struct vrfb { - u8 context; - void __iomem *vaddr[4]; - unsigned long paddr[4]; - u16 xres; - u16 yres; - u16 xoffset; - u16 yoffset; - u8 bytespp; - bool yuv_mode; -}; - -#ifdef CONFIG_OMAP2_VRFB -extern int omap_vrfb_request_ctx(struct vrfb *vrfb); -extern void omap_vrfb_release_ctx(struct vrfb *vrfb); -extern void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp); -extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); -extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); -extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, - unsigned bytespp, bool yuv_mode); -extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); -extern void omap_vrfb_restore_context(void); - -#else -static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; } -static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {} -static inline void omap_vrfb_adjust_size(u16 *width, u16 *height, - u8 bytespp) {} -static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp) - { return 0; } -static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp) - { return 0; } -static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, - u16 width, u16 height, unsigned bytespp, bool yuv_mode) {} -static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot) - { return 0; } -static inline void omap_vrfb_restore_context(void) {} -#endif -#endif /* __VRFB_H */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 28acb38..743fc28 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,198 +20,20 @@ #include <linux/init.h> #include <linux/io.h> +#include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <plat/sram.h> -#include <plat/cpu.h> - -#include "sram.h" - -/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ -#include "../mach-omap2/iomap.h" -#include "../mach-omap2/prm2xxx_3xxx.h" -#include "../mach-omap2/sdrc.h" - -#define OMAP1_SRAM_PA 0x20000000 -#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA -#else -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#endif -#define OMAP5_SRAM_PA 0x40300000 - -#if defined(CONFIG_ARCH_OMAP2PLUS) -#define SRAM_BOOTLOADER_SZ 0x00 -#else -#define SRAM_BOOTLOADER_SZ 0x80 -#endif - -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) - -#define GP_DEVICE 0x300 - #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) -static unsigned long omap_sram_start; static void __iomem *omap_sram_base; static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; /* - * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessible size for all device types is 2k. A GP - * device allows ARM11 but not other initiators for full size. This - * functionality seems ok until some nice security API happens. - */ -static int is_sram_locked(void) -{ - if (OMAP2_DEVICE_TYPE_GP == omap_type()) { - /* RAMFW: R/W access to all initiators for all qualifier sets */ - if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ - } - if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); - } - return 0; - } else - return 1; /* assume locked with no PPA or security driver */ -} - -/* - * The amount of SRAM depends on the core type. - * Note that we cannot try to test for SRAM here because writes - * to secure SRAM will hang the system. Also the SRAM is not - * yet mapped at this point. - */ -static void __init omap_detect_sram(void) -{ - omap_sram_skip = SRAM_BOOTLOADER_SZ; - if (cpu_class_is_omap2()) { - if (is_sram_locked()) { - if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PUB_PA; - if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || - (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { - omap_sram_size = 0x7000; /* 28K */ - omap_sram_skip += SZ_16K; - } else { - omap_sram_size = 0x8000; /* 32K */ - } - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PUB_PA; - omap_sram_size = 0xa000; /* 40K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PUB_PA; - omap_sram_size = 0x800; /* 2K */ - } - } else { - if (soc_is_am33xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0xe000; /* 56K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PA; - if (cpu_is_omap242x()) - omap_sram_size = 0xa0000; /* 640K */ - else if (cpu_is_omap243x()) - omap_sram_size = 0x10000; /* 64K */ - } - } - } else { - omap_sram_start = OMAP1_SRAM_PA; - - if (cpu_is_omap7xx()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) - omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1611() || - cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; /* 16K */ - else { - pr_err("Could not detect SRAM size\n"); - omap_sram_size = 0x4000; - } - } -} - -/* - * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. - */ -static void __init omap_map_sram(void) -{ - int cached = 1; - - if (omap_sram_size == 0) - return; - -#ifdef CONFIG_OMAP4_ERRATA_I688 - if (cpu_is_omap44xx()) { - omap_sram_start += PAGE_SIZE; - omap_sram_size -= SZ_16K; - } -#endif - if (cpu_is_omap34xx()) { - /* - * SRAM must be marked as non-cached on OMAP3 since the - * CORE DPLL M2 divider change code (in SRAM) runs with the - * SDRAM controller disabled, and if it is marked cached, - * the ARM may attempt to write cache lines back to SDRAM - * which will cause the system to hang. - */ - cached = 0; - } - - omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); - omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, - cached); - if (!omap_sram_base) { - pr_err("SRAM: Could not map\n"); - return; - } - - omap_sram_ceil = omap_sram_base + omap_sram_size; - - /* - * Looks like we need to preserve some bootloader code at the - * beginning of SRAM for jumping to flash for reboot to work... - */ - memset_io(omap_sram_base + omap_sram_skip, 0, - omap_sram_size - omap_sram_skip); -} - -/* * Memory allocator for SRAM: calculates the new ceiling address * for pushing a function using the fncpy API. * @@ -236,171 +58,39 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } -#ifdef CONFIG_ARCH_OMAP1 - -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - BUG_ON(!_omap_sram_reprogram_clock); - /* On 730, bit 13 must always be 1 */ - if (cpu_is_omap7xx()) - ckctl |= 0x2000; - _omap_sram_reprogram_clock(dpllctl, ckctl); -} - -static int __init omap1_sram_init(void) -{ - _omap_sram_reprogram_clock = - omap_sram_push(omap1_sram_reprogram_clock, - omap1_sram_reprogram_clock_sz); - - return 0; -} - -#else -#define omap1_sram_init() do {} while (0) -#endif - -#if defined(CONFIG_ARCH_OMAP2) - -static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); - -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ - BUG_ON(!_omap2_sram_ddr_init); - _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, - base_cs, force_unlock); -} - -static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, - u32 mem_type); - -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) -{ - BUG_ON(!_omap2_sram_reprogram_sdrc); - _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); -} - -static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) -{ - BUG_ON(!_omap2_set_prcm); - return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); -} -#endif - -#ifdef CONFIG_SOC_OMAP2420 -static int __init omap242x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, - omap242x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, - omap242x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, - omap242x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap242x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -static int __init omap243x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, - omap243x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, - omap243x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, - omap243x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap243x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 - -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - -void omap3_sram_restore_context(void) +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +void omap_sram_reset(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); } -static inline int omap34xx_sram_init(void) -{ - omap3_sram_restore_context(); - return 0; -} -#else -static inline int omap34xx_sram_init(void) -{ - return 0; -} -#endif /* CONFIG_ARCH_OMAP3 */ - -static inline int am33xx_sram_init(void) +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +void __init omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached) { - return 0; -} + if (size == 0) + return; -int __init omap_sram_init(void) -{ - omap_detect_sram(); - omap_map_sram(); + start = ROUND_DOWN(start, PAGE_SIZE); + omap_sram_size = size; + omap_sram_skip = skip; + omap_sram_base = __arm_ioremap_exec(start, size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } - if (!(cpu_class_is_omap2())) - omap1_sram_init(); - else if (cpu_is_omap242x()) - omap242x_sram_init(); - else if (cpu_is_omap2430()) - omap243x_sram_init(); - else if (soc_is_am33xx()) - am33xx_sram_init(); - else if (cpu_is_omap34xx()) - omap34xx_sram_init(); + omap_sram_reset(); - return 0; + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h deleted file mode 100644 index 29b43ef..0000000 --- a/arch/arm/plat-omap/sram.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __PLAT_OMAP_SRAM_H__ -#define __PLAT_OMAP_SRAM_H__ - -extern int __init omap_sram_init(void); - -#endif /* __PLAT_OMAP_SRAM_H__ */ diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index af8e484..1fc9419 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -5,7 +5,6 @@ obj-y := dma.o obj-$(CONFIG_PXA3xx) += mfp.o -obj-$(CONFIG_PXA95x) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 5c79c29..10bc4f3 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t; ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP) +#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) /* * each MFP pin will have a MFPR register, since the offset of the * register varies between processors, the processor specific code @@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val); void mfp_config(unsigned long *mfp_cfgs, int num); void mfp_config_run(void); void mfp_config_lpm(void); -#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */ +#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ #endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index db98e70..0abd1c4 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id, pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", chan->number, __func__, buf); - if (chan->end == NULL) + if (chan->end == NULL) { pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", chan->number, __func__, chan); - - chan->end->next = buf; - chan->end = buf; + } else { + chan->end->next = buf; + chan->end = buf; + } } /* if necessary, update the next buffer field */ diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index b1e05cc..37542c2 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -344,7 +344,7 @@ static int s3c_adc_probe(struct platform_device *pdev) int ret; unsigned tmp; - adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL); + adc = devm_kzalloc(dev, sizeof(struct adc_device), GFP_KERNEL); if (adc == NULL) { dev_err(dev, "failed to allocate adc_device\n"); return -ENOMEM; @@ -355,50 +355,46 @@ static int s3c_adc_probe(struct platform_device *pdev) adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); - adc->vdd = regulator_get(dev, "vdd"); + adc->vdd = devm_regulator_get(dev, "vdd"); if (IS_ERR(adc->vdd)) { dev_err(dev, "operating without regulator \"vdd\" .\n"); - ret = PTR_ERR(adc->vdd); - goto err_alloc; + return PTR_ERR(adc->vdd); } adc->irq = platform_get_irq(pdev, 1); if (adc->irq <= 0) { dev_err(dev, "failed to get adc irq\n"); - ret = -ENOENT; - goto err_reg; + return -ENOENT; } - ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); + ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev), + adc); if (ret < 0) { dev_err(dev, "failed to attach adc irq\n"); - goto err_reg; + return ret; } - adc->clk = clk_get(dev, "adc"); + adc->clk = devm_clk_get(dev, "adc"); if (IS_ERR(adc->clk)) { dev_err(dev, "failed to get adc clock\n"); - ret = PTR_ERR(adc->clk); - goto err_irq; + return PTR_ERR(adc->clk); } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { dev_err(dev, "failed to find registers\n"); - ret = -ENXIO; - goto err_clk; + return -ENXIO; } - adc->regs = ioremap(regs->start, resource_size(regs)); + adc->regs = devm_request_and_ioremap(dev, regs); if (!adc->regs) { dev_err(dev, "failed to map registers\n"); - ret = -ENXIO; - goto err_clk; + return -ENXIO; } ret = regulator_enable(adc->vdd); if (ret) - goto err_ioremap; + return ret; clk_enable(adc->clk); @@ -418,32 +414,14 @@ static int s3c_adc_probe(struct platform_device *pdev) adc_dev = adc; return 0; - - err_ioremap: - iounmap(adc->regs); - err_clk: - clk_put(adc->clk); - - err_irq: - free_irq(adc->irq, adc); - err_reg: - regulator_put(adc->vdd); - err_alloc: - kfree(adc); - return ret; } static int __devexit s3c_adc_remove(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); - iounmap(adc->regs); - free_irq(adc->irq, adc); clk_disable(adc->clk); regulator_disable(adc->vdd); - regulator_put(adc->vdd); - clk_put(adc->clk); - kfree(adc); return 0; } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 03f654d..a17d7b3 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -486,11 +486,7 @@ static struct resource s3c_i2c0_resource[] = { struct platform_device s3c_device_i2c0 = { .name = "s3c2410-i2c", -#ifdef CONFIG_S3C_DEV_I2C1 .id = 0, -#else - .id = -1, -#endif .num_resources = ARRAY_SIZE(s3c_i2c0_resource), .resource = s3c_i2c0_resource, }; diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 5da4b4f..a9b8096 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -123,7 +123,6 @@ extern struct platform_device s5pv210_device_spdif; extern struct platform_device exynos4_device_ac97; extern struct platform_device exynos4_device_ahci; -extern struct platform_device exynos4_device_dwmci; extern struct platform_device exynos4_device_i2s0; extern struct platform_device exynos4_device_i2s1; extern struct platform_device exynos4_device_i2s2; diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 619f0fa..2c4332b 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -10,7 +10,7 @@ config PLAT_VERSATILE_LEDS def_bool y if NEW_LEDS depends on ARCH_REALVIEW || ARCH_VERSATILE select LEDS_CLASS - select LEDS_TRIGGER + select LEDS_TRIGGERS config PLAT_VERSATILE_SCHED_CLOCK def_bool y |