diff options
Diffstat (limited to 'arch/ia64')
52 files changed, 1806 insertions, 792 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 845cd09..ff7ae6b 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -271,6 +271,25 @@ config SCHED_SMT Intel IA64 chips with MultiThreading at a cost of slightly increased overhead in some places. If unsure say N here. +config PERMIT_BSP_REMOVE + bool "Support removal of Bootstrap Processor" + depends on HOTPLUG_CPU + default n + ---help--- + Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU + support. + +config FORCE_CPEI_RETARGET + bool "Force assumption that CPEI can be re-targetted" + depends on PERMIT_BSP_REMOVE + default n + ---help--- + Say Y if you need to force the assumption that CPEI can be re-targetted to + any cpu in the system. This hint is available via ACPI 3.0 specifications. + Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP. + This option it useful to enable this feature on older BIOS's as well. + You can also enable this by using boot command line option force_cpei=1. + config PREEMPT bool "Preemptible Kernel" help @@ -453,6 +472,7 @@ source "arch/ia64/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index b40672b..90e9c2e 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:18:49 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:10:42 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -58,17 +60,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -81,18 +102,17 @@ CONFIG_ITANIUM=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_BRL_EMU=y CONFIG_IA64_L1_CACHE_SHIFT=6 -# CONFIG_NUMA is not set -# CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set @@ -105,7 +125,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_VIRTUAL_MEM_MAP is not set CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y # CONFIG_IA64_MCA_RECOVERY is not set @@ -117,7 +142,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -125,6 +149,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -137,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -173,6 +199,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -206,6 +233,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -218,14 +250,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -286,20 +320,13 @@ CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=m # @@ -390,6 +417,7 @@ CONFIG_SCSI_SPI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -399,6 +427,7 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -409,14 +438,7 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -448,6 +470,7 @@ CONFIG_DM_ZERO=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -486,6 +509,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -524,6 +548,7 @@ CONFIG_EEPRO100=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -630,6 +655,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -681,6 +707,7 @@ CONFIG_DRM_R128=m # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -731,12 +758,19 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -754,6 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -775,6 +810,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set @@ -830,6 +866,8 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m # CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -837,17 +875,18 @@ CONFIG_SND_PCM_OSS=m # Generic devices # CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -856,38 +895,38 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set CONFIG_SND_CS4281=m +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -929,12 +968,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -946,13 +988,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y @@ -972,6 +1016,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1046,7 +1091,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -1071,6 +1116,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1111,6 +1157,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1153,6 +1200,7 @@ CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_EXPERIMENTAL is not set @@ -1179,6 +1227,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1237,28 +1286,32 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_IA64_GRANULE_16MB is not set CONFIG_IA64_GRANULE_64MB=y # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 991c07b..744fd2f 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Wed Sep 28 08:27:29 2005 +# Linux kernel version: 2.6.16-rc5 +# Thu Mar 2 16:39:10 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +61,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -82,6 +103,8 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set @@ -105,6 +128,9 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -117,13 +143,13 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -131,6 +157,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -145,6 +172,7 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -187,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -221,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -233,8 +267,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -275,7 +312,13 @@ CONFIG_FW_LOADER=m # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -295,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -327,6 +363,7 @@ CONFIG_BLK_DEV_IDESCSI=m # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -400,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -409,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -436,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -476,6 +510,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -497,6 +532,7 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices @@ -515,6 +551,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -564,6 +601,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -668,12 +706,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -689,6 +730,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -738,10 +780,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -749,6 +791,7 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -756,6 +799,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -765,6 +814,7 @@ CONFIG_MMTIMER=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -815,26 +865,28 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -843,40 +895,40 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=m # CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -922,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -939,12 +994,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -964,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1043,6 +1102,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1051,6 +1111,10 @@ CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1079,6 +1143,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1120,6 +1185,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1189,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1254,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_HP_SIMSCSI is not set # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig index a26781c..d9146c3 100644 --- a/arch/ia64/configs/sim_defconfig +++ b/arch/ia64/configs/sim_defconfig @@ -1,39 +1,52 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:13:41 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -# CONFIG_STANDALONE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -43,21 +56,45 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y +CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set CONFIG_IA64_HP_SIM=y # CONFIG_ITANIUM is not set @@ -66,17 +103,36 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set # CONFIG_IA64_PAGE_SIZE_16KB is not set CONFIG_IA64_PAGE_SIZE_64KB=y +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set -# CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=64 +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_VIRTUAL_MEM_MAP is not set CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y +# CONFIG_IA64_MCA_RECOVERY is not set # CONFIG_PERFMON is not set CONFIG_IA64_PALINFO=m @@ -84,7 +140,6 @@ CONFIG_IA64_PALINFO=m # Firmware Drivers # CONFIG_EFI_VARS=y -# CONFIG_SMBIOS is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -93,15 +148,98 @@ CONFIG_BINFMT_MISC=y # # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # # # Generic Driver Options # +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -118,12 +256,16 @@ CONFIG_BINFMT_MISC=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -133,6 +275,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -144,6 +287,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -157,13 +301,14 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_DEBUG is not set # @@ -174,77 +319,47 @@ CONFIG_SCSI_SPI_ATTRS=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # # -# Networking support +# Network device support # -CONFIG_NET=y +# CONFIG_NETDEVICES is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # -# Networking options +# PHY device support # -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set # -# SCTP Configuration (EXPERIMENTAL) +# Ethernet (10 or 100Mbit) # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set +# CONFIG_NET_ETHERNET is not set # -# QoS and/or fair queueing +# Ethernet (1000 Mbit) # -# CONFIG_NET_SCHED is not set # -# Network testing +# Ethernet (10000 Mbit) # -# CONFIG_NET_PKTGEN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_NETDEVICES is not set # # ISDN subsystem @@ -274,16 +389,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -293,6 +398,15 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -310,7 +424,6 @@ CONFIG_HW_CONSOLE=y # CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -324,15 +437,19 @@ CONFIG_UNIX98_PTYS=y CONFIG_EFI_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set # CONFIG_AGP is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -340,10 +457,33 @@ CONFIG_EFI_RTC=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -362,7 +502,6 @@ CONFIG_EFI_RTC=y # Console display driver support # # CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # @@ -373,6 +512,12 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support @@ -380,22 +525,41 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -406,7 +570,8 @@ CONFIG_JBD=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -415,12 +580,12 @@ CONFIG_JBD=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -448,18 +613,22 @@ CONFIG_NFS_FS=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -476,10 +645,10 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -490,8 +659,13 @@ CONFIG_EFI_PARTITION=y # # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # HP Simulator drivers @@ -502,33 +676,50 @@ CONFIG_HP_SIMSERIAL_CONSOLE=y CONFIG_HP_SIMSCSI=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # -# CONFIG_IA64_GRANULE_16MB is not set -CONFIG_IA64_GRANULE_64MB=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_IA64_PRINT_HAZARDS is not set -# CONFIG_DISABLE_VHPT is not set +# CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_IA64_GRANULE_16MB is not set +CONFIG_IA64_GRANULE_64MB=y +# CONFIG_IA64_PRINT_HAZARDS is not set +# CONFIG_DISABLE_VHPT is not set # CONFIG_IA64_DEBUG_CMPXCHG is not set # CONFIG_IA64_DEBUG_IRQ is not set -CONFIG_DEBUG_INFO=y CONFIG_SYSVIPC_COMPAT=y # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 3cb503b..8206752 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc4 -# Fri Dec 2 10:33:48 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:06:38 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -88,7 +90,7 @@ CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_UNCACHED_ALLOCATOR=y -CONFIG_ZONE_DMA_IS_DMA32=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -126,6 +128,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -140,6 +143,7 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers @@ -166,6 +170,7 @@ CONFIG_ACPI=y CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -207,6 +212,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -247,6 +253,11 @@ CONFIG_IPV6=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -330,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -457,13 +469,7 @@ CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -CONFIG_SCSI_QLA22XX=y -CONFIG_SCSI_QLA2300=y -CONFIG_SCSI_QLA2322=y -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -545,6 +551,7 @@ CONFIG_NETDEVICES=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -632,12 +639,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -686,8 +696,8 @@ CONFIG_AGP=y CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m -# CONFIG_HPET is not set CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -703,6 +713,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -791,12 +807,14 @@ CONFIG_USB_UHCI_HCD=m # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -816,6 +834,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -903,6 +922,10 @@ CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -931,6 +954,7 @@ CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -973,6 +997,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1041,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1111,19 +1137,21 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 6859119..766bf49 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc4 -# Fri Dec 2 16:06:32 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 15:49:18 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -88,7 +90,7 @@ CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ZONE_DMA_IS_DMA32=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -114,6 +116,8 @@ CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y +CONFIG_PERMIT_BSP_REMOVE=y +CONFIG_FORCE_CPEI_RETARGET=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -162,6 +166,7 @@ CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -203,6 +208,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -237,6 +243,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -326,6 +337,7 @@ CONFIG_BLK_DEV_INITRD=y # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -443,13 +455,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_QLOGIC_FC=y # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -572,6 +578,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -676,12 +683,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -694,6 +704,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -738,10 +749,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set # @@ -756,6 +767,12 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -765,6 +782,7 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -854,12 +872,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -873,6 +894,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -948,7 +970,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -980,6 +1002,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1021,6 +1044,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1090,6 +1114,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1157,18 +1182,20 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 53899dc..949dc46 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -1,16 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:15:01 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 15:55:36 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -26,17 +23,18 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -45,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +59,36 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_KMOD is not set # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set CONFIG_IA64_HP_ZX1=y @@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_NUMA is not set -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=16 # CONFIG_HOTPLUG_CPU is not set @@ -106,7 +123,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y @@ -118,7 +142,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -126,6 +149,7 @@ CONFIG_BINFMT_MISC=y # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -138,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -179,6 +204,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -211,14 +237,17 @@ CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -CONFIG_IP_NF_ARPTABLES=y -# CONFIG_IP_NF_ARPFILTER is not set -# CONFIG_IP_NF_ARP_MANGLE is not set # # DCCP Configuration (EXPERIMENTAL) @@ -229,6 +258,11 @@ CONFIG_IP_NF_ARPTABLES=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -241,14 +275,16 @@ CONFIG_IP_NF_ARPTABLES=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -310,20 +346,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -407,13 +436,14 @@ CONFIG_SCSI_LOGGING=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -421,13 +451,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set @@ -438,17 +466,9 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -465,6 +485,7 @@ CONFIG_SCSI_QLA2XXX=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m @@ -505,6 +526,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -555,6 +577,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -652,6 +675,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -703,6 +727,7 @@ CONFIG_DRM_RADEON=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -753,12 +778,19 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -789,6 +821,7 @@ CONFIG_VIDEO_DEV=y # # Video Adapters # +# CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set @@ -796,14 +829,16 @@ CONFIG_VIDEO_DEV=y # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set # # Radio Adapters @@ -824,7 +859,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -833,6 +867,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -848,10 +883,7 @@ CONFIG_FB_RADEON_DEBUG=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -860,6 +892,7 @@ CONFIG_FB_RADEON_DEBUG=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -892,6 +925,8 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -900,17 +935,18 @@ CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -919,39 +955,39 @@ CONFIG_SND_AC97_BUS=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=y CONFIG_SND_FM801_TEA575X=y +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -997,12 +1033,15 @@ CONFIG_USB_UHCI_HCD=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1014,13 +1053,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1034,6 +1075,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1049,6 +1091,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set +# CONFIG_USB_ET61X251 is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set @@ -1113,7 +1156,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -1135,6 +1178,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set @@ -1174,6 +1218,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1238,6 +1283,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1296,26 +1342,30 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +CONFIG_KPROBES=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -CONFIG_KPROBES=y +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set CONFIG_IA64_PRINT_HAZARDS=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index dcbc78a..3e76728 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:13:03 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:02:28 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -59,17 +61,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -89,14 +110,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -CONFIG_NUMA=y -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y # CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y @@ -110,19 +127,29 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -130,6 +157,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -144,6 +172,7 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -186,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -220,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -232,14 +267,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -301,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -407,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -416,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -443,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -483,6 +510,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -523,6 +551,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -572,6 +601,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -676,12 +706,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -697,6 +730,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -710,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_SGI_IOC4=y +# CONFIG_SERIAL_SGI_IOC3 is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -745,10 +780,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -756,6 +791,7 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -763,6 +799,12 @@ CONFIG_MMTIMER=y # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -772,6 +814,7 @@ CONFIG_MMTIMER=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -822,26 +865,28 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -850,40 +895,40 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=m # CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -929,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -946,12 +994,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -971,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1050,11 +1102,17 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices # CONFIG_SGI_IOC4=y +CONFIG_SGI_IOC3=m + +# +# EDAC - error detection and reporting (RAS) +# # # File systems @@ -1085,6 +1143,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1126,6 +1185,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1195,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1260,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_HP_SIMSCSI is not set # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c index 5856510..b3355a9 100644 --- a/arch/ia64/ia32/ia32_signal.c +++ b/arch/ia64/ia32/ia32_signal.c @@ -515,6 +515,7 @@ sys32_signal (int sig, unsigned int handler) sigact_set_handler(&new_sa, handler, 0); new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK; + sigemptyset(&new_sa.sa.sa_mask); ret = do_sigaction(sig, &new_sa, &old_sa); diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index d2702c4..4722ec5 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -284,19 +284,24 @@ acpi_parse_plat_int_src(acpi_table_entry_header * header, return 0; } +#ifdef CONFIG_HOTPLUG_CPU unsigned int can_cpei_retarget(void) { extern int cpe_vector; + extern unsigned int force_cpei_retarget; /* * Only if CPEI is supported and the override flag * is present, otherwise return that its re-targettable * if we are in polling mode. */ - if (cpe_vector > 0 && !acpi_cpei_override) - return 0; - else - return 1; + if (cpe_vector > 0) { + if (acpi_cpei_override || force_cpei_retarget) + return 1; + else + return 0; + } + return 1; } unsigned int is_cpu_cpei_target(unsigned int cpu) @@ -315,6 +320,7 @@ void set_cpei_target_cpu(unsigned int cpu) { acpi_cpei_phys_cpuid = cpu_physical_id(cpu); } +#endif unsigned int get_cpei_target_cpu(void) { @@ -761,6 +767,59 @@ int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) return (0); } +int additional_cpus __initdata = -1; + +static __init int setup_additional_cpus(char *s) +{ + if (s) + additional_cpus = simple_strtol(s, NULL, 0); + + return 0; +} + +early_param("additional_cpus", setup_additional_cpus); + +/* + * cpu_possible_map should be static, it cannot change as cpu's + * are onlined, or offlined. The reason is per-cpu data-structures + * are allocated by some modules at init time, and dont expect to + * do this dynamically on cpu arrival/departure. + * cpu_present_map on the other hand can change dynamically. + * In case when cpu_hotplug is not compiled, then we resort to current + * behaviour, which is cpu_possible == cpu_present. + * - Ashok Raj + * + * Three ways to find out the number of additional hotplug CPUs: + * - If the BIOS specified disabled CPUs in ACPI/mptables use that. + * - The user can overwrite it with additional_cpus=NUM + * - Otherwise don't reserve additional CPUs. + */ +__init void prefill_possible_map(void) +{ + int i; + int possible, disabled_cpus; + + disabled_cpus = total_cpus - available_cpus; + + if (additional_cpus == -1) { + if (disabled_cpus > 0) + additional_cpus = disabled_cpus; + else + additional_cpus = 0; + } + + possible = available_cpus + additional_cpus; + + if (possible > NR_CPUS) + possible = NR_CPUS; + + printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", + possible, max((possible - available_cpus), 0)); + + for (i = 0; i < possible; i++) + cpu_set(i, cpu_possible_map); +} + int acpi_map_lsapic(acpi_handle handle, int *pcpu) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c index 6ade379..e00b215 100644 --- a/arch/ia64/kernel/cyclone.c +++ b/arch/ia64/kernel/cyclone.c @@ -36,7 +36,7 @@ int __init init_cyclone_clock(void) u32* volatile cyclone_timer; /* Cyclone MPMC0 register */ if (!use_cyclone) - return -ENODEV; + return 0; printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index c485a3b..9990320 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -410,24 +410,16 @@ efi_init (void) efi_config_table_t *config_tables; efi_char16_t *c16; u64 efi_desc_size; - char *cp, *end, vendor[100] = "unknown"; + char *cp, vendor[100] = "unknown"; extern char saved_command_line[]; int i; /* it's too early to be able to use the standard kernel command line support... */ for (cp = saved_command_line; *cp; ) { if (memcmp(cp, "mem=", 4) == 0) { - cp += 4; - mem_limit = memparse(cp, &end); - if (end != cp) - break; - cp = end; + mem_limit = memparse(cp + 4, &cp); } else if (memcmp(cp, "max_addr=", 9) == 0) { - cp += 9; - max_addr = GRANULEROUNDDOWN(memparse(cp, &end)); - if (end != cp) - break; - cp = end; + max_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp)); } else { while (*cp != ' ' && *cp) ++cp; @@ -458,7 +450,7 @@ efi_init (void) /* Show what we know for posterity */ c16 = __va(efi.systab->fw_vendor); if (c16) { - for (i = 0;i < (int) sizeof(vendor) && *c16; ++i) + for (i = 0;i < (int) sizeof(vendor) - 1 && *c16; ++i) vendor[i] = *c16++; vendor[i] = '\0'; } diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 7a6ffd6..0e3eda9 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -569,7 +569,9 @@ GLOBAL_ENTRY(ia64_trace_syscall) .mem.offset 0,0; st8.spill [r2]=r8 // store return value in slot for r8 .mem.offset 8,0; st8.spill [r3]=r10 // clear error indication in slot for r10 br.call.sptk.many rp=syscall_trace_leave // give parent a chance to catch return value -.ret3: br.cond.sptk .work_pending_syscall_end +.ret3: +(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk + br.cond.sptk .work_pending_syscall_end strace_error: ld8 r3=[r2] // load pt_regs.r8 @@ -1100,9 +1102,6 @@ skip_rbs_switch: st8 [r2]=r8 st8 [r3]=r10 .work_pending: - tbit.nz p6,p0=r31,TIF_SIGDELAYED // signal delayed from MCA/INIT/NMI/PMI context? -(p6) br.cond.sptk.few .sigdelayed - ;; tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0? (p6) br.cond.sptk.few .notify #ifdef CONFIG_PREEMPT @@ -1129,17 +1128,6 @@ skip_rbs_switch: (pLvSys)br.cond.sptk.few .work_pending_syscall_end br.cond.sptk.many .work_processed_kernel // don't re-check -// There is a delayed signal that was detected in MCA/INIT/NMI/PMI context where -// it could not be delivered. Deliver it now. The signal might be for us and -// may set TIF_SIGPENDING, so redrive ia64_leave_* after processing the delayed -// signal. - -.sigdelayed: - br.call.sptk.many rp=do_sigdelayed - cmp.eq p6,p0=r0,r0 // p6 <- 1, always re-check -(pLvSys)br.cond.sptk.few .work_pending_syscall_end - br.cond.sptk.many .work_processed_kernel // re-check - .work_pending_syscall_end: adds r2=PT(R8)+16,r12 adds r3=PT(R10)+16,r12 @@ -1601,5 +1589,21 @@ sys_call_table: data8 sys_inotify_add_watch data8 sys_inotify_rm_watch data8 sys_migrate_pages // 1280 + data8 sys_openat + data8 sys_mkdirat + data8 sys_mknodat + data8 sys_fchownat + data8 sys_futimesat // 1285 + data8 sys_newfstatat + data8 sys_unlinkat + data8 sys_renameat + data8 sys_linkat + data8 sys_symlinkat // 1290 + data8 sys_readlinkat + data8 sys_fchmodat + data8 sys_faccessat + data8 sys_ni_syscall // reserved for pselect + data8 sys_ni_syscall // 1295 reserved for ppoll + data8 sys_unshare .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index ce42391..7a05b1c 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -878,31 +878,7 @@ fsyscall_table: data8 0 // timer_delete data8 0 // clock_settime data8 fsys_clock_gettime // clock_gettime - data8 0 // clock_getres // 1255 - data8 0 // clock_nanosleep - data8 0 // fstatfs64 - data8 0 // statfs64 - data8 0 - data8 0 // 1260 - data8 0 - data8 0 // mq_open - data8 0 // mq_unlink - data8 0 // mq_timedsend - data8 0 // mq_timedreceive // 1265 - data8 0 // mq_notify - data8 0 // mq_getsetattr - data8 0 // kexec_load - data8 0 - data8 0 // 1270 - data8 0 - data8 0 - data8 0 - data8 0 - data8 0 // 1275 - data8 0 - data8 0 - data8 0 - data8 0 - data8 0 // 1280 - .org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls + // fill in zeros for the remaining entries + .zero: + .space fsyscall_table + 8*NR_syscalls - .zero, 0 diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index fbc7ea3..f1778a8 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -352,6 +352,7 @@ start_ap: mov ar.rsc=0 // place RSE in enforced lazy mode ;; loadrs // clear the dirty partition + mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base ;; mov ar.bspstore=r2 // establish the new RSE stack ;; diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c index e72de58..bbcfd08 100644 --- a/arch/ia64/kernel/ia64_ksyms.c +++ b/arch/ia64/kernel/ia64_ksyms.c @@ -10,23 +10,8 @@ #include <linux/string.h> EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memchr); -EXPORT_SYMBOL(memcmp); EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memscan); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strncmp); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strstr); -EXPORT_SYMBOL(strpbrk); #include <asm/checksum.h> EXPORT_SYMBOL(ip_fast_csum); /* hand-coded assembly */ diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 574084f..8832c55 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -631,6 +631,7 @@ get_target_cpu (unsigned int gsi, int vector) { #ifdef CONFIG_SMP static int cpu = -1; + extern int cpe_vector; /* * In case of vector shared by multiple RTEs, all RTEs that @@ -653,6 +654,11 @@ get_target_cpu (unsigned int gsi, int vector) if (!cpu_online(smp_processor_id())) return cpu_physical_id(smp_processor_id()); +#ifdef CONFIG_ACPI + if (cpe_vector > 0 && vector == IA64_CPEP_VECTOR) + return get_cpei_target_cpu(); +#endif + #ifdef CONFIG_NUMA { int num_cpus, cpu_index, iosapic_index, numa_cpu, i = 0; diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index d33244c..5ce908e 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -163,8 +163,19 @@ void fixup_irqs(void) { unsigned int irq; extern void ia64_process_pending_intr(void); + extern void ia64_disable_timer(void); + extern volatile int time_keeper_id; + + ia64_disable_timer(); + + /* + * Find a new timesync master + */ + if (smp_processor_id() == time_keeper_id) { + time_keeper_id = first_cpu(cpu_online_map); + printk ("CPU %d is now promoted to time-keeper master\n", time_keeper_id); + } - ia64_set_itv(1<<16); /* * Phase 1: Locate irq's bound to this cpu and * relocate them for cpu removal. diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 301f2e9..dcd906f 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -561,11 +561,12 @@ ENTRY(dirty_bit) ;; // avoid RAW on r18 mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_D|_PAGE_A,r18 // set the dirty and accessed bits + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only update if page is present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only compare if page is present ;; (p6) itc.d r25 // install updated PTE ;; @@ -626,11 +627,12 @@ ENTRY(iaccess_bit) ;; mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_A,r18 // set the accessed bit + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only if page present ;; (p6) itc.i r25 // install updated PTE ;; @@ -680,11 +682,12 @@ ENTRY(daccess_bit) ;; // avoid RAW on r18 mov ar.ccv=r18 // set compare value for cmpxchg or r25=_PAGE_A,r18 // set the dirty bit + tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit ;; - cmpxchg8.acq r26=[r17],r25,ar.ccv +(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page is present mov r24=PAGE_SHIFT<<2 ;; - cmp.eq p6,p7=r26,r18 +(p6) cmp.eq p6,p7=r26,r18 // Only if page is present ;; (p6) itc.d r25 // install updated PTE /* @@ -1362,7 +1365,6 @@ END(debug_vector) // 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57) ENTRY(unaligned_access) DBG_FAULT(30) - mov r16=cr.ipsr mov r31=pr // prepare to save predicates ;; br.sptk.many dispatch_unaligned_handler diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 909fed2..b57e723 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -284,6 +284,7 @@ ia64_mca_log_sal_error_record(int sal_info_type) #ifdef CONFIG_ACPI int cpe_vector = -1; +int ia64_cpe_irq = -1; static irqreturn_t ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) @@ -1470,11 +1471,13 @@ void __devinit ia64_mca_cpu_init(void *cpu_data) { void *pal_vaddr; + static int first_time = 1; - if (smp_processor_id() == 0) { + if (first_time) { void *mca_data; int cpu; + first_time = 0; mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu) * NR_CPUS + KERNEL_STACK_SIZE); mca_data = (void *)(((unsigned long)mca_data + @@ -1730,6 +1733,7 @@ ia64_mca_late_init(void) desc = irq_descp(irq); desc->status |= IRQ_PER_CPU; setup_irq(irq, &mca_cpe_irqaction); + ia64_cpe_irq = irq; } ia64_mca_register_cpev(cpe_vector); IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", __FUNCTION__); diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 3492e32..e883d85 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -123,8 +123,9 @@ mca_page_isolate(unsigned long paddr) void mca_handler_bh(unsigned long paddr) { - printk(KERN_DEBUG "OS_MCA: process [pid: %d](%s) encounters MCA.\n", - current->pid, current->comm); + printk(KERN_ERR + "OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n", + current->pid, current->comm, paddr); spin_lock(&mca_bh_lock); switch (mca_page_isolate(paddr)) { @@ -132,7 +133,7 @@ mca_handler_bh(unsigned long paddr) printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr); break; case ISOLATE_NG: - printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr); + printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr); break; default: break; @@ -437,6 +438,9 @@ recover_from_read_error(slidx_table_t *slidx, * the process not have any locks of kernel. */ + /* Is minstate valid? */ + if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate)) + return 0; psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr); /* @@ -564,10 +568,15 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, return 0; /* - * If there is no bus error, record is weird but we need not to recover. + * The cache check and bus check bits have four possible states + * cc bc + * 0 0 Weird record, not recovered + * 1 0 Cache error, not recovered + * 0 1 I/O error, attempt recovery + * 1 1 Memory error, attempt recovery */ if (psp->bc == 0 || pbci == NULL) - return 1; + return 0; /* * Sorry, we cannot handle so many. diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 9c5194b..077f212 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -6722,6 +6722,7 @@ __initcall(pfm_init); void pfm_init_percpu (void) { + static int first_time=1; /* * make sure no measurement is active * (may inherit programmed PMCs from EFI). @@ -6734,8 +6735,10 @@ pfm_init_percpu (void) */ pfm_unfreeze_pmu(); - if (smp_processor_id() == 0) + if (first_time) { register_percpu_irq(IA64_PERFMON_VECTOR, &perfmon_irqaction); + first_time=0; + } ia64_setreg(_IA64_REG_CR_PMV, IA64_PERFMON_VECTOR); ia64_srlz_d(); diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index c076657..3258e09 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -71,6 +71,8 @@ unsigned long __per_cpu_offset[NR_CPUS]; EXPORT_SYMBOL(__per_cpu_offset); #endif +extern void ia64_setup_printk_clock(void); + DEFINE_PER_CPU(struct cpuinfo_ia64, cpu_info); DEFINE_PER_CPU(unsigned long, local_per_cpu_offset); DEFINE_PER_CPU(unsigned long, ia64_phys_stacked_size_p8); @@ -428,6 +430,7 @@ setup_arch (char **cmdline_p) if (early_console_setup(*cmdline_p) == 0) mark_bsp_online(); + parse_early_param(); #ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); @@ -445,6 +448,8 @@ setup_arch (char **cmdline_p) /* process SAL system table: */ ia64_sal_init(efi.sal_systab); + ia64_setup_printk_clock(); + #ifdef CONFIG_SMP cpu_physical_id(0) = hard_smp_processor_id(); @@ -684,6 +689,9 @@ void setup_per_cpu_areas (void) { /* start_kernel() requires this... */ +#ifdef CONFIG_ACPI_HOTPLUG_CPU + prefill_possible_map(); +#endif } /* diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 463f6bb..1d7903e 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -588,104 +588,3 @@ ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall) } return 0; } - -/* Set a delayed signal that was detected in MCA/INIT/NMI/PMI context where it - * could not be delivered. It is important that the target process is not - * allowed to do any more work in user space. Possible cases for the target - * process: - * - * - It is sleeping and will wake up soon. Store the data in the current task, - * the signal will be sent when the current task returns from the next - * interrupt. - * - * - It is running in user context. Store the data in the current task, the - * signal will be sent when the current task returns from the next interrupt. - * - * - It is running in kernel context on this or another cpu and will return to - * user context. Store the data in the target task, the signal will be sent - * to itself when the target task returns to user space. - * - * - It is running in kernel context on this cpu and will sleep before - * returning to user context. Because this is also the current task, the - * signal will not get delivered and the task could sleep indefinitely. - * Store the data in the idle task for this cpu, the signal will be sent - * after the idle task processes its next interrupt. - * - * To cover all cases, store the data in the target task, the current task and - * the idle task on this cpu. Whatever happens, the signal will be delivered - * to the target task before it can do any useful user space work. Multiple - * deliveries have no unwanted side effects. - * - * Note: This code is executed in MCA/INIT/NMI/PMI context, with interrupts - * disabled. It must not take any locks nor use kernel structures or services - * that require locks. - */ - -/* To ensure that we get the right pid, check its start time. To avoid extra - * include files in thread_info.h, convert the task start_time to unsigned long, - * giving us a cycle time of > 580 years. - */ -static inline unsigned long -start_time_ul(const struct task_struct *t) -{ - return t->start_time.tv_sec * NSEC_PER_SEC + t->start_time.tv_nsec; -} - -void -set_sigdelayed(pid_t pid, int signo, int code, void __user *addr) -{ - struct task_struct *t; - unsigned long start_time = 0; - int i; - - for (i = 1; i <= 3; ++i) { - switch (i) { - case 1: - t = find_task_by_pid(pid); - if (t) - start_time = start_time_ul(t); - break; - case 2: - t = current; - break; - default: - t = idle_task(smp_processor_id()); - break; - } - - if (!t) - return; - task_thread_info(t)->sigdelayed.signo = signo; - task_thread_info(t)->sigdelayed.code = code; - task_thread_info(t)->sigdelayed.addr = addr; - task_thread_info(t)->sigdelayed.start_time = start_time; - task_thread_info(t)->sigdelayed.pid = pid; - wmb(); - set_tsk_thread_flag(t, TIF_SIGDELAYED); - } -} - -/* Called from entry.S when it detects TIF_SIGDELAYED, a delayed signal that - * was detected in MCA/INIT/NMI/PMI context where it could not be delivered. - */ - -void -do_sigdelayed(void) -{ - struct siginfo siginfo; - pid_t pid; - struct task_struct *t; - - clear_thread_flag(TIF_SIGDELAYED); - memset(&siginfo, 0, sizeof(siginfo)); - siginfo.si_signo = current_thread_info()->sigdelayed.signo; - siginfo.si_code = current_thread_info()->sigdelayed.code; - siginfo.si_addr = current_thread_info()->sigdelayed.addr; - pid = current_thread_info()->sigdelayed.pid; - t = find_task_by_pid(pid); - if (!t) - return; - if (current_thread_info()->sigdelayed.start_time != start_time_ul(t)) - return; - force_sig_info(siginfo.si_signo, &siginfo, t); -} diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 8f44e7d..c4b633b 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -70,6 +70,12 @@ #endif #ifdef CONFIG_HOTPLUG_CPU +#ifdef CONFIG_PERMIT_BSP_REMOVE +#define bsp_remove_ok 1 +#else +#define bsp_remove_ok 0 +#endif + /* * Store all idle threads, this can be reused instead of creating * a new thread. Also avoids complicated thread destroy functionality @@ -104,7 +110,7 @@ struct sal_to_os_boot *sal_state_for_booting_cpu = &sal_boot_rendez_state[0]; /* * ITC synchronization related stuff: */ -#define MASTER 0 +#define MASTER (0) #define SLAVE (SMP_CACHE_BYTES/8) #define NUM_ROUNDS 64 /* magic value */ @@ -129,7 +135,7 @@ DEFINE_PER_CPU(int, cpu_state); /* Bitmasks of currently online, and possible CPUs */ cpumask_t cpu_online_map; EXPORT_SYMBOL(cpu_online_map); -cpumask_t cpu_possible_map; +cpumask_t cpu_possible_map = CPU_MASK_NONE; EXPORT_SYMBOL(cpu_possible_map); cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; @@ -151,6 +157,27 @@ char __initdata no_int_routing; unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */ +#ifdef CONFIG_FORCE_CPEI_RETARGET +#define CPEI_OVERRIDE_DEFAULT (1) +#else +#define CPEI_OVERRIDE_DEFAULT (0) +#endif + +unsigned int force_cpei_retarget = CPEI_OVERRIDE_DEFAULT; + +static int __init +cmdl_force_cpei(char *str) +{ + int value=0; + + get_option (&str, &value); + force_cpei_retarget = value; + + return 1; +} + +__setup("force_cpei=", cmdl_force_cpei); + static int __init nointroute (char *str) { @@ -161,6 +188,27 @@ nointroute (char *str) __setup("nointroute", nointroute); +static void fix_b0_for_bsp(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + int cpuid; + static int fix_bsp_b0 = 1; + + cpuid = smp_processor_id(); + + /* + * Cache the b0 value on the first AP that comes up + */ + if (!(fix_bsp_b0 && cpuid)) + return; + + sal_boot_rendez_state[0].br[0] = sal_boot_rendez_state[cpuid].br[0]; + printk ("Fixed BSP b0 value from CPU %d\n", cpuid); + + fix_bsp_b0 = 0; +#endif +} + void sync_master (void *arg) { @@ -327,8 +375,9 @@ smp_setup_percpu_timer (void) static void __devinit smp_callin (void) { - int cpuid, phys_id; + int cpuid, phys_id, itc_master; extern void ia64_init_itm(void); + extern volatile int time_keeper_id; #ifdef CONFIG_PERFMON extern void pfm_init_percpu(void); @@ -336,6 +385,7 @@ smp_callin (void) cpuid = smp_processor_id(); phys_id = hard_smp_processor_id(); + itc_master = time_keeper_id; if (cpu_online(cpuid)) { printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n", @@ -343,6 +393,8 @@ smp_callin (void) BUG(); } + fix_b0_for_bsp(); + lock_ipi_calllock(); cpu_set(cpuid, cpu_online_map); unlock_ipi_calllock(); @@ -365,8 +417,8 @@ smp_callin (void) * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls * local_bh_enable(), which bugs out if irqs are not enabled... */ - Dprintk("Going to syncup ITC with BP.\n"); - ia64_sync_itc(0); + Dprintk("Going to syncup ITC with ITC Master.\n"); + ia64_sync_itc(itc_master); } /* @@ -506,9 +558,6 @@ smp_build_cpu_map (void) for (cpu = 0; cpu < NR_CPUS; cpu++) { ia64_cpu_to_sapicid[cpu] = -1; -#ifdef CONFIG_HOTPLUG_CPU - cpu_set(cpu, cpu_possible_map); -#endif } ia64_cpu_to_sapicid[0] = boot_cpu_id; @@ -638,6 +687,47 @@ remove_siblinginfo(int cpu) } extern void fixup_irqs(void); + +int migrate_platform_irqs(unsigned int cpu) +{ + int new_cpei_cpu; + irq_desc_t *desc = NULL; + cpumask_t mask; + int retval = 0; + + /* + * dont permit CPEI target to removed. + */ + if (cpe_vector > 0 && is_cpu_cpei_target(cpu)) { + printk ("CPU (%d) is CPEI Target\n", cpu); + if (can_cpei_retarget()) { + /* + * Now re-target the CPEI to a different processor + */ + new_cpei_cpu = any_online_cpu(cpu_online_map); + mask = cpumask_of_cpu(new_cpei_cpu); + set_cpei_target_cpu(new_cpei_cpu); + desc = irq_descp(ia64_cpe_irq); + /* + * Switch for now, immediatly, we need to do fake intr + * as other interrupts, but need to study CPEI behaviour with + * polling before making changes. + */ + if (desc) { + desc->handler->disable(ia64_cpe_irq); + desc->handler->set_affinity(ia64_cpe_irq, mask); + desc->handler->enable(ia64_cpe_irq); + printk ("Re-targetting CPEI to cpu %d\n", new_cpei_cpu); + } + } + if (!desc) { + printk ("Unable to retarget CPEI, offline cpu [%d] failed\n", cpu); + retval = -EBUSY; + } + } + return retval; +} + /* must be called with cpucontrol mutex held */ int __cpu_disable(void) { @@ -646,8 +736,17 @@ int __cpu_disable(void) /* * dont permit boot processor for now */ - if (cpu == 0) - return -EBUSY; + if (cpu == 0 && !bsp_remove_ok) { + printk ("Your platform does not support removal of BSP\n"); + return (-EBUSY); + } + + cpu_clear(cpu, cpu_online_map); + + if (migrate_platform_irqs(cpu)) { + cpu_set(cpu, cpu_online_map); + return (-EBUSY); + } remove_siblinginfo(cpu); cpu_clear(cpu, cpu_online_map); diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 028a2b9..ac16743 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -32,7 +32,7 @@ extern unsigned long wall_jiffies; -#define TIME_KEEPER_ID 0 /* smp_processor_id() of time-keeper */ +volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */ #ifdef CONFIG_IA64_DEBUG_IRQ @@ -71,7 +71,7 @@ timer_interrupt (int irq, void *dev_id, struct pt_regs *regs) new_itm += local_cpu_data->itm_delta; - if (smp_processor_id() == TIME_KEEPER_ID) { + if (smp_processor_id() == time_keeper_id) { /* * Here we are in the timer irq handler. We have irqs locally * disabled, but we don't know if the timer_bh is running on @@ -236,6 +236,11 @@ static struct irqaction timer_irqaction = { .name = "timer" }; +void __devinit ia64_disable_timer(void) +{ + ia64_set_itv(1 << 16); +} + void __init time_init (void) { @@ -250,31 +255,53 @@ time_init (void) set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); } -#define SMALLUSECS 100 +/* + * Generic udelay assumes that if preemption is allowed and the thread + * migrates to another CPU, that the ITC values are synchronized across + * all CPUs. + */ +static void +ia64_itc_udelay (unsigned long usecs) +{ + unsigned long start = ia64_get_itc(); + unsigned long end = start + usecs*local_cpu_data->cyc_per_usec; + + while (time_before(ia64_get_itc(), end)) + cpu_relax(); +} + +void (*ia64_udelay)(unsigned long usecs) = &ia64_itc_udelay; void udelay (unsigned long usecs) { - unsigned long start; - unsigned long cycles; - unsigned long smallusecs; + (*ia64_udelay)(usecs); +} +EXPORT_SYMBOL(udelay); - /* - * Execute the non-preemptible delay loop (because the ITC might - * not be synchronized between CPUS) in relatively short time - * chunks, allowing preemption between the chunks. - */ - while (usecs > 0) { - smallusecs = (usecs > SMALLUSECS) ? SMALLUSECS : usecs; - preempt_disable(); - cycles = smallusecs*local_cpu_data->cyc_per_usec; - start = ia64_get_itc(); +static unsigned long long ia64_itc_printk_clock(void) +{ + if (ia64_get_kr(IA64_KR_PER_CPU_DATA)) + return sched_clock(); + return 0; +} + +static unsigned long long ia64_default_printk_clock(void) +{ + return (unsigned long long)(jiffies_64 - INITIAL_JIFFIES) * + (1000000000/HZ); +} - while (ia64_get_itc() - start < cycles) - cpu_relax(); +unsigned long long (*ia64_printk_clock)(void) = &ia64_default_printk_clock; - preempt_enable(); - usecs -= smallusecs; - } +unsigned long long printk_clock(void) +{ + return ia64_printk_clock(); +} + +void __init +ia64_setup_printk_clock(void) +{ + if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) + ia64_printk_clock = ia64_itc_printk_clock; } -EXPORT_SYMBOL(udelay); diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 6e5eea1..3b6fd79 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,7 +36,7 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ -#ifdef CONFIG_ACPI +#if defined (CONFIG_ACPI) && defined (CONFIG_HOTPLUG_CPU) /* * If CPEI cannot be re-targetted, and this is * CPEI target, then dont create the control file diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index 5539190..dabd6c3 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -16,6 +16,7 @@ #include <linux/module.h> /* for EXPORT_SYMBOL */ #include <linux/hardirq.h> #include <linux/kprobes.h> +#include <linux/delay.h> /* for ssleep() */ #include <asm/fpswa.h> #include <asm/ia32.h> @@ -116,6 +117,13 @@ die (const char *str, struct pt_regs *regs, long err) bust_spinlocks(0); die.lock_owner = -1; spin_unlock_irq(&die.lock); + + if (panic_on_oops) { + printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); + ssleep(5); + panic("Fatal exception"); + } + do_exit(SIGSEGV); } diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c index f9e0ae9..1e35755 100644 --- a/arch/ia64/kernel/unaligned.c +++ b/arch/ia64/kernel/unaligned.c @@ -24,7 +24,7 @@ #include <asm/uaccess.h> #include <asm/unaligned.h> -extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); +extern void die_if_kernel(char *str, struct pt_regs *regs, long err); #undef DEBUG_UNALIGNED_TRAP @@ -53,6 +53,15 @@ dump (const char *str, void *vp, size_t len) #define SIGN_EXT9 0xffffffffffffff00ul /* + * sysctl settable hook which tells the kernel whether to honor the + * IA64_THREAD_UAC_NOPRINT prctl. Because this is user settable, we want + * to allow the super user to enable/disable this for security reasons + * (i.e. don't allow attacker to fill up logs with unaligned accesses). + */ +int no_unaligned_warning; +static int noprint_warning; + +/* * For M-unit: * * opcode | m | x6 | @@ -1324,8 +1333,9 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0) goto force_sigbus; - if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT) - && within_logging_rate_limit()) + if (!no_unaligned_warning && + !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) && + within_logging_rate_limit()) { char buf[200]; /* comm[] is at most 16 bytes... */ size_t len; @@ -1340,7 +1350,22 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) if (user_mode(regs)) tty_write_message(current->signal->tty, buf); buf[len-1] = '\0'; /* drop '\r' */ - printk(KERN_WARNING "%s", buf); /* watch for command names containing %s */ + /* watch for command names containing %s */ + printk(KERN_WARNING "%s", buf); + } else { + if (no_unaligned_warning && !noprint_warning) { + noprint_warning = 1; + printk(KERN_WARNING "%s(%d) encountered an " + "unaligned exception which required\n" + "kernel assistance, which degrades " + "the performance of the application.\n" + "Unaligned exception warnings have " + "been disabled by the system " + "administrator\n" + "echo 0 > /proc/sys/kernel/ignore-" + "unaligned-usertrap to re-enable\n", + current->comm, current->pid); + } } } else { if (within_logging_rate_limit()) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index acaaec4..9855ba3 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -181,13 +181,15 @@ per_cpu_init (void) { void *cpu_data; int cpu; + static int first_time=1; /* * get_free_pages() cannot be used before cpu_init() done. BSP * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls * get_zeroed_page(). */ - if (smp_processor_id() == 0) { + if (first_time) { + first_time=0; cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); for (cpu = 0; cpu < NR_CPUS; cpu++) { diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index c87d6d1..573d5cc 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -528,12 +528,17 @@ void __init find_memory(void) void *per_cpu_init(void) { int cpu; + static int first_time = 1; + if (smp_processor_id() != 0) return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; - for (cpu = 0; cpu < NR_CPUS; cpu++) - per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + if (first_time) { + first_time = 0; + for (cpu = 0; cpu < NR_CPUS; cpu++) + per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + } return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; } diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 0b30ca0..9ba32b2 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -579,7 +579,7 @@ pcibios_align_resource (void *data, struct resource *res, char * __init pcibios_setup (char *str) { - return NULL; + return str; } int diff --git a/arch/ia64/sn/kernel/Makefile b/arch/ia64/sn/kernel/Makefile index 3e9b4ee..ab9c48c 100644 --- a/arch/ia64/sn/kernel/Makefile +++ b/arch/ia64/sn/kernel/Makefile @@ -10,7 +10,8 @@ CPPFLAGS += -I$(srctree)/arch/ia64/sn/include obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \ - huberror.o io_init.o iomv.o klconflib.o sn2/ + huberror.o io_init.o iomv.o klconflib.o pio_phys.o \ + sn2/ obj-$(CONFIG_IA64_GENERIC) += machvec.o obj-$(CONFIG_SGI_TIOCX) += tiocx.o obj-$(CONFIG_IA64_SGI_SN_XP) += xp.o diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index d7e4d79..dfb3f29 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -23,6 +23,10 @@ #include "xtalk/hubdev.h" #include "xtalk/xwidgetdev.h" + +extern void sn_init_cpei_timer(void); +extern void register_sn_procfs(void); + static struct list_head sn_sysdata_list; /* sysdata list struct */ @@ -40,12 +44,12 @@ struct brick { struct slab_info slab_info[MAX_SLABS + 1]; }; -int sn_ioif_inited = 0; /* SN I/O infrastructure initialized? */ +int sn_ioif_inited; /* SN I/O infrastructure initialized? */ struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ -static int max_segment_number = 0; /* Default highest segment number */ -static int max_pcibus_number = 255; /* Default highest pci bus number */ +static int max_segment_number; /* Default highest segment number */ +static int max_pcibus_number = 255; /* Default highest pci bus number */ /* * Hooks and struct for unsupported pci providers @@ -84,7 +88,6 @@ static inline u64 sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num, u64 address) { - struct ia64_sal_retval ret_stuff; ret_stuff.status = 0; ret_stuff.v0 = 0; @@ -94,7 +97,6 @@ sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num, (u64) nasid, (u64) widget_num, (u64) device_num, (u64) address, 0, 0, 0); return ret_stuff.status; - } /* @@ -102,7 +104,6 @@ sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num, */ static inline u64 sal_get_hubdev_info(u64 handle, u64 address) { - struct ia64_sal_retval ret_stuff; ret_stuff.status = 0; ret_stuff.v0 = 0; @@ -118,7 +119,6 @@ static inline u64 sal_get_hubdev_info(u64 handle, u64 address) */ static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address) { - struct ia64_sal_retval ret_stuff; ret_stuff.status = 0; ret_stuff.v0 = 0; @@ -215,7 +215,7 @@ static void __init sn_fixup_ionodes(void) struct hubdev_info *hubdev; u64 status; u64 nasid; - int i, widget, device; + int i, widget, device, size; /* * Get SGI Specific HUB chipset information. @@ -251,48 +251,37 @@ static void __init sn_fixup_ionodes(void) if (!hubdev->hdi_flush_nasid_list.widget_p) continue; + size = (HUB_WIDGET_ID_MAX + 1) * + sizeof(struct sn_flush_device_kernel *); hubdev->hdi_flush_nasid_list.widget_p = - kmalloc((HUB_WIDGET_ID_MAX + 1) * - sizeof(struct sn_flush_device_kernel *), - GFP_KERNEL); - memset(hubdev->hdi_flush_nasid_list.widget_p, 0x0, - (HUB_WIDGET_ID_MAX + 1) * - sizeof(struct sn_flush_device_kernel *)); + kzalloc(size, GFP_KERNEL); + if (!hubdev->hdi_flush_nasid_list.widget_p) + BUG(); for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) { - sn_flush_device_kernel = kmalloc(DEV_PER_WIDGET * - sizeof(struct - sn_flush_device_kernel), - GFP_KERNEL); + size = DEV_PER_WIDGET * + sizeof(struct sn_flush_device_kernel); + sn_flush_device_kernel = kzalloc(size, GFP_KERNEL); if (!sn_flush_device_kernel) BUG(); - memset(sn_flush_device_kernel, 0x0, - DEV_PER_WIDGET * - sizeof(struct sn_flush_device_kernel)); dev_entry = sn_flush_device_kernel; for (device = 0; device < DEV_PER_WIDGET; device++,dev_entry++) { - dev_entry->common = kmalloc(sizeof(struct - sn_flush_device_common), - GFP_KERNEL); + size = sizeof(struct sn_flush_device_common); + dev_entry->common = kzalloc(size, GFP_KERNEL); if (!dev_entry->common) BUG(); - memset(dev_entry->common, 0x0, sizeof(struct - sn_flush_device_common)); if (sn_prom_feature_available( PRF_DEVICE_FLUSH_LIST)) status = sal_get_device_dmaflush_list( - nasid, - widget, - device, - (u64)(dev_entry->common)); + nasid, widget, device, + (u64)(dev_entry->common)); else status = sn_device_fixup_war(nasid, - widget, - device, - dev_entry->common); + widget, device, + dev_entry->common); if (status != SALRET_OK) panic("SAL call failed: %s\n", ia64_sal_strerror(status)); @@ -383,13 +372,12 @@ void sn_pci_fixup_slot(struct pci_dev *dev) pci_dev_get(dev); /* for the sysdata pointer */ pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); - if (pcidev_info <= 0) + if (!pcidev_info) BUG(); /* Cannot afford to run out of memory */ - sn_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_KERNEL); - if (sn_irq_info <= 0) + sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); + if (!sn_irq_info) BUG(); /* Cannot afford to run out of memory */ - memset(sn_irq_info, 0, sizeof(struct sn_irq_info)); /* Call to retrieve pci device information needed by kernel. */ status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, @@ -482,13 +470,13 @@ void sn_pci_fixup_slot(struct pci_dev *dev) */ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) { - int status = 0; + int status; int nasid, cnode; struct pci_controller *controller; struct sn_pci_controller *sn_controller; struct pcibus_bussoft *prom_bussoft_ptr; struct hubdev_info *hubdev_info; - void *provider_soft = NULL; + void *provider_soft; struct sn_pcibus_provider *provider; status = sal_get_pcibus_info((u64) segment, (u64) busnum, @@ -535,6 +523,8 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) bus->sysdata = controller; if (provider->bus_fixup) provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller); + else + provider_soft = NULL; if (provider_soft == NULL) { /* fixup failed or not applicable */ @@ -617,15 +607,15 @@ void sn_bus_store_sysdata(struct pci_dev *dev) void sn_bus_free_sysdata(void) { struct sysdata_el *element; - struct list_head *list; + struct list_head *list, *safe; -sn_sysdata_free_start: - list_for_each(list, &sn_sysdata_list) { + list_for_each_safe(list, safe, &sn_sysdata_list) { element = list_entry(list, struct sysdata_el, entry); list_del(&element->entry); + list_del(&(((struct pcidev_info *) + (element->sysdata))->pdi_list)); kfree(element->sysdata); kfree(element); - goto sn_sysdata_free_start; } return; } @@ -638,13 +628,8 @@ sn_sysdata_free_start: static int __init sn_pci_init(void) { - int i = 0; - int j = 0; + int i, j; struct pci_dev *pci_dev = NULL; - extern void sn_init_cpei_timer(void); -#ifdef CONFIG_PROC_FS - extern void register_sn_procfs(void); -#endif if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) return 0; @@ -700,32 +685,29 @@ static int __init sn_pci_init(void) */ void hubdev_init_node(nodepda_t * npda, cnodeid_t node) { - struct hubdev_info *hubdev_info; + int size; + pg_data_t *pg; + + size = sizeof(struct hubdev_info); if (node >= num_online_nodes()) /* Headless/memless IO nodes */ - hubdev_info = - (struct hubdev_info *)alloc_bootmem_node(NODE_DATA(0), - sizeof(struct - hubdev_info)); + pg = NODE_DATA(0); else - hubdev_info = - (struct hubdev_info *)alloc_bootmem_node(NODE_DATA(node), - sizeof(struct - hubdev_info)); - npda->pdinfo = (void *)hubdev_info; + pg = NODE_DATA(node); + hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size); + + npda->pdinfo = (void *)hubdev_info; } geoid_t cnodeid_get_geoid(cnodeid_t cnode) { - struct hubdev_info *hubdev; hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); return hubdev->hdi_geoid; - } subsys_initcall(sn_pci_init); diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 74d87d9..c373113 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -299,7 +299,9 @@ void sn_irq_unfixup(struct pci_dev *pci_dev) return; sn_irq_info = SN_PCIDEV_INFO(pci_dev)->pdi_sn_irq_info; - if (!sn_irq_info || !sn_irq_info->irq_irq) { + if (!sn_irq_info) + return; + if (!sn_irq_info->irq_irq) { kfree(sn_irq_info); return; } diff --git a/arch/ia64/sn/kernel/mca.c b/arch/ia64/sn/kernel/mca.c index 9ab684d..3db62f2 100644 --- a/arch/ia64/sn/kernel/mca.c +++ b/arch/ia64/sn/kernel/mca.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved. */ #include <linux/types.h> @@ -137,7 +137,8 @@ int sn_salinfo_platform_oemdata(const u8 *sect_header, u8 **oemdata, u64 *oemdat static int __init sn_salinfo_init(void) { - salinfo_platform_oemdata = &sn_salinfo_platform_oemdata; + if (ia64_platform_is("sn2")) + salinfo_platform_oemdata = &sn_salinfo_platform_oemdata; return 0; } diff --git a/arch/ia64/sn/kernel/pio_phys.S b/arch/ia64/sn/kernel/pio_phys.S new file mode 100644 index 0000000..3c7d48d --- /dev/null +++ b/arch/ia64/sn/kernel/pio_phys.S @@ -0,0 +1,71 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. + * + * This file contains macros used to access MMR registers via + * uncached physical addresses. + * pio_phys_read_mmr - read an MMR + * pio_phys_write_mmr - write an MMR + * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0 + * Second MMR will be skipped if address is NULL + * + * Addresses passed to these routines should be uncached physical addresses + * ie., 0x80000.... + */ + + + +#include <asm/asmmacro.h> +#include <asm/page.h> + +GLOBAL_ENTRY(pio_phys_read_mmr) + .prologue + .regstk 1,0,0,0 + .body + mov r2=psr + rsm psr.i | psr.dt + ;; + srlz.d + ld8.acq r8=[r32] + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_phys_read_mmr) + +GLOBAL_ENTRY(pio_phys_write_mmr) + .prologue + .regstk 2,0,0,0 + .body + mov r2=psr + rsm psr.i | psr.dt + ;; + srlz.d + st8.rel [r32]=r33 + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_phys_write_mmr) + +GLOBAL_ENTRY(pio_atomic_phys_write_mmrs) + .prologue + .regstk 4,0,0,0 + .body + mov r2=psr + cmp.ne p9,p0=r34,r0; + rsm psr.i | psr.dt | psr.ic + ;; + srlz.d + st8.rel [r32]=r33 +(p9) st8.rel [r34]=r35 + ;; + mov psr.l=r2;; + srlz.d + br.ret.sptk.many rp +END(pio_atomic_phys_write_mmrs) + + diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index aac1ba3..8b6d5c8 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved. */ #include <linux/config.h> @@ -67,6 +67,7 @@ extern unsigned long last_time_offset; extern void (*ia64_mark_idle) (int); extern void snidle(int); extern unsigned char acpi_kbd_controller_present; +extern unsigned long long (*ia64_printk_clock)(void); unsigned long sn_rtc_cycles_per_second; EXPORT_SYMBOL(sn_rtc_cycles_per_second); @@ -74,7 +75,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second); DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); EXPORT_PER_CPU_SYMBOL(__sn_hub_info); -DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]); +DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid); DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda); @@ -316,6 +317,7 @@ struct pcdp_vga_device { #define PCDP_PCI_TRANS_IOPORT 0x02 #define PCDP_PCI_TRANS_MMIO 0x01 +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) static void sn_scan_pcdp(void) { @@ -357,6 +359,17 @@ sn_scan_pcdp(void) break; /* once we find the primary, we're done */ } } +#endif + +static unsigned long sn2_rtc_initial; + +static unsigned long long ia64_sn2_printk_clock(void) +{ + unsigned long rtc_now = rtc_time(); + + return (rtc_now - sn2_rtc_initial) * + (1000000000 / sn_rtc_cycles_per_second); +} /** * sn_setup - SN platform setup routine @@ -372,6 +385,7 @@ void __init sn_setup(char **cmdline_p) u32 version = sn_sal_rev(); extern void sn_cpu_init(void); + sn2_rtc_initial = rtc_time(); ia64_sn_plat_set_error_handling_features(); // obsolete ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV); ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES); @@ -423,19 +437,6 @@ void __init sn_setup(char **cmdline_p) */ build_cnode_tables(); - /* - * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard - * support here so we don't have to listen to failed keyboard probe - * messages. - */ - if (version <= 0x0209 && acpi_kbd_controller_present) { - printk(KERN_INFO "Disabling legacy keyboard support as prom " - "is too old and doesn't provide FADT\n"); - acpi_kbd_controller_present = 0; - } - - printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); - status = ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec, &drift); @@ -449,6 +450,21 @@ void __init sn_setup(char **cmdline_p) platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR; + ia64_printk_clock = ia64_sn2_printk_clock; + + /* + * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard + * support here so we don't have to listen to failed keyboard probe + * messages. + */ + if (version <= 0x0209 && acpi_kbd_controller_present) { + printk(KERN_INFO "Disabling legacy keyboard support as prom " + "is too old and doesn't provide FADT\n"); + acpi_kbd_controller_present = 0; + } + + printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); + /* * we set the default root device to /dev/hda * to make simulation easy @@ -482,6 +498,7 @@ void __init sn_setup(char **cmdline_p) * for sn. */ pm_power_off = ia64_sn_power_down; + current->thread.flags |= IA64_THREAD_MIGRATION; } /** @@ -644,7 +661,8 @@ void __init sn_cpu_init(void) SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3}; u64 *pio; pio = is_shub1() ? pio1 : pio2; - pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]); + pda->pio_write_status_addr = + (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]); pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0; } diff --git a/arch/ia64/sn/kernel/sn2/prominfo_proc.c b/arch/ia64/sn/kernel/sn2/prominfo_proc.c index 81c63b2..6ae276d 100644 --- a/arch/ia64/sn/kernel/sn2/prominfo_proc.c +++ b/arch/ia64/sn/kernel/sn2/prominfo_proc.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 1999,2001-2004, 2006 Silicon Graphics, Inc. All Rights Reserved. * * Module to export the system's Firmware Interface Tables, including * PROM revision numbers and banners, in /proc @@ -190,7 +190,7 @@ static int read_version_entry(char *page, char **start, off_t off, int count, int *eof, void *data) { - int len = 0; + int len; /* data holds the NASID of the node */ len = dump_version(page, (unsigned long)data); @@ -202,7 +202,7 @@ static int read_fit_entry(char *page, char **start, off_t off, int count, int *eof, void *data) { - int len = 0; + int len; /* data holds the NASID of the node */ len = dump_fit(page, (unsigned long)data); @@ -229,13 +229,16 @@ int __init prominfo_init(void) struct proc_dir_entry *p; cnodeid_t cnodeid; unsigned long nasid; + int size; char name[NODE_NAME_LEN]; if (!ia64_platform_is("sn2")) return 0; - proc_entries = kmalloc(num_online_nodes() * sizeof(struct proc_dir_entry *), - GFP_KERNEL); + size = num_online_nodes() * sizeof(struct proc_dir_entry *); + proc_entries = kzalloc(size, GFP_KERNEL); + if (!proc_entries) + return -ENOMEM; sgi_prominfo_entry = proc_mkdir("sgi_prominfo", NULL); @@ -244,14 +247,12 @@ int __init prominfo_init(void) sprintf(name, "node%d", cnodeid); *entp = proc_mkdir(name, sgi_prominfo_entry); nasid = cnodeid_to_nasid(cnodeid); - p = create_proc_read_entry( - "fit", 0, *entp, read_fit_entry, - (void *)nasid); + p = create_proc_read_entry("fit", 0, *entp, read_fit_entry, + (void *)nasid); if (p) p->owner = THIS_MODULE; - p = create_proc_read_entry( - "version", 0, *entp, read_version_entry, - (void *)nasid); + p = create_proc_read_entry("version", 0, *entp, + read_version_entry, (void *)nasid); if (p) p->owner = THIS_MODULE; entp++; @@ -263,7 +264,7 @@ int __init prominfo_init(void) void __exit prominfo_exit(void) { struct proc_dir_entry **entp; - unsigned cnodeid; + unsigned int cnodeid; char name[NODE_NAME_LEN]; entp = proc_entries; diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index f153a4c..d9d306c 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -46,8 +46,14 @@ DECLARE_PER_CPU(struct ptc_stats, ptcstats); static __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock); -void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned long *, unsigned long, - volatile unsigned long *, unsigned long); +extern unsigned long +sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long, + volatile unsigned long *, unsigned long, + volatile unsigned long *, unsigned long); +void +sn2_ptc_deadlock_recovery(short *, short, short, int, + volatile unsigned long *, unsigned long, + volatile unsigned long *, unsigned long); /* * Note: some is the following is captured here to make degugging easier @@ -59,16 +65,6 @@ void sn2_ptc_deadlock_recovery(short *, short, short, int, volatile unsigned lon #define reset_max_active_on_deadlock() 1 #define PTC_LOCK(sh1) ((sh1) ? &sn2_global_ptc_lock : &sn_nodepda->ptc_lock) -static inline void ptc_lock(int sh1, unsigned long *flagp) -{ - spin_lock_irqsave(PTC_LOCK(sh1), *flagp); -} - -static inline void ptc_unlock(int sh1, unsigned long flags) -{ - spin_unlock_irqrestore(PTC_LOCK(sh1), flags); -} - struct ptc_stats { unsigned long ptc_l; unsigned long change_rid; @@ -82,6 +78,8 @@ struct ptc_stats { unsigned long shub_ptc_flushes_not_my_mm; }; +#define sn2_ptctest 0 + static inline unsigned long wait_piowc(void) { volatile unsigned long *piows; @@ -95,6 +93,27 @@ static inline unsigned long wait_piowc(void) return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0; } +/** + * sn_migrate - SN-specific task migration actions + * @task: Task being migrated to new CPU + * + * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order. + * Context switching user threads which have memory-mapped MMIO may cause + * PIOs to issue from seperate CPUs, thus the PIO writes must be drained + * from the previous CPU's Shub before execution resumes on the new CPU. + */ +void sn_migrate(struct task_struct *task) +{ + pda_t *last_pda = pdacpu(task_thread_info(task)->last_cpu); + volatile unsigned long *adr = last_pda->pio_write_status_addr; + unsigned long val = last_pda->pio_write_status_val; + + /* Drain PIO writes from old CPU's Shub */ + while (unlikely((*adr & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) + != val)) + cpu_relax(); +} + void sn_tlb_migrate_finish(struct mm_struct *mm) { /* flush_tlb_mm is inefficient if more than 1 users of mm */ @@ -200,7 +219,7 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start, max_active = max_active_pio(shub1); itc = ia64_get_itc(); - ptc_lock(shub1, &flags); + spin_lock_irqsave(PTC_LOCK(shub1), flags); itc2 = ia64_get_itc(); __get_cpu_var(ptcstats).lock_itc_clocks += itc2 - itc; @@ -258,7 +277,7 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start, ia64_srlz_d(); } - ptc_unlock(shub1, flags); + spin_unlock_irqrestore(PTC_LOCK(shub1), flags); preempt_enable(); } @@ -270,11 +289,12 @@ sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start, * TLB flush transaction. The recovery sequence is somewhat tricky & is * coded in assembly language. */ -void sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid, volatile unsigned long *ptc0, unsigned long data0, - volatile unsigned long *ptc1, unsigned long data1) + +void +sn2_ptc_deadlock_recovery(short *nasids, short ib, short ie, int mynasid, + volatile unsigned long *ptc0, unsigned long data0, + volatile unsigned long *ptc1, unsigned long data1) { - extern unsigned long sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long, - volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long); short nasid, i; unsigned long *piows, zeroval, n; @@ -447,7 +467,7 @@ static struct proc_dir_entry *proc_sn2_ptc; static int __init sn2_ptc_init(void) { if (!ia64_platform_is("sn2")) - return -ENOSYS; + return 0; if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) { printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME); diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 19b54fb..70db21f 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2004-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2004-2006 Silicon Graphics, Inc. All rights reserved. * * SGI Altix topology and hardware performance monitoring API. * Mark Goodwin <markgw@sgi.com>. @@ -973,6 +973,9 @@ static int __devinit sn_hwperf_misc_register_init(void) { int e; + if (!ia64_platform_is("sn2")) + return 0; + sn_hwperf_init(); /* diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c index a06719d..c686d9c 100644 --- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c +++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c @@ -6,11 +6,11 @@ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. */ #include <linux/config.h> -#include <asm/uaccess.h> #ifdef CONFIG_PROC_FS #include <linux/proc_fs.h> #include <linux/seq_file.h> +#include <asm/uaccess.h> #include <asm/sn/sn_sal.h> static int partition_id_show(struct seq_file *s, void *p) @@ -90,10 +90,10 @@ static int coherence_id_open(struct inode *inode, struct file *file) return single_open(file, coherence_id_show, NULL); } -static struct proc_dir_entry *sn_procfs_create_entry( - const char *name, struct proc_dir_entry *parent, - int (*openfunc)(struct inode *, struct file *), - int (*releasefunc)(struct inode *, struct file *)) +static struct proc_dir_entry +*sn_procfs_create_entry(const char *name, struct proc_dir_entry *parent, + int (*openfunc)(struct inode *, struct file *), + int (*releasefunc)(struct inode *, struct file *)) { struct proc_dir_entry *e = create_proc_entry(name, 0444, parent); @@ -126,24 +126,24 @@ void register_sn_procfs(void) return; sn_procfs_create_entry("partition_id", sgi_proc_dir, - partition_id_open, single_release); + partition_id_open, single_release); sn_procfs_create_entry("system_serial_number", sgi_proc_dir, - system_serial_number_open, single_release); + system_serial_number_open, single_release); sn_procfs_create_entry("licenseID", sgi_proc_dir, - licenseID_open, single_release); + licenseID_open, single_release); e = sn_procfs_create_entry("sn_force_interrupt", sgi_proc_dir, - sn_force_interrupt_open, single_release); + sn_force_interrupt_open, single_release); if (e) e->proc_fops->write = sn_force_interrupt_write_proc; sn_procfs_create_entry("coherence_id", sgi_proc_dir, - coherence_id_open, single_release); + coherence_id_open, single_release); sn_procfs_create_entry("sn_topology", sgi_proc_dir, - sn_topology_open, sn_topology_release); + sn_topology_open, sn_topology_release); } #endif /* CONFIG_PROC_FS */ diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c index deb9baf..56a88b6 100644 --- a/arch/ia64/sn/kernel/sn2/timer.c +++ b/arch/ia64/sn/kernel/sn2/timer.c @@ -14,6 +14,7 @@ #include <asm/hw_irq.h> #include <asm/system.h> +#include <asm/timex.h> #include <asm/sn/leds.h> #include <asm/sn/shub_mmr.h> @@ -28,9 +29,27 @@ static struct time_interpolator sn2_interpolator = { .source = TIME_SOURCE_MMIO64 }; +/* + * sn udelay uses the RTC instead of the ITC because the ITC is not + * synchronized across all CPUs, and the thread may migrate to another CPU + * if preemption is enabled. + */ +static void +ia64_sn_udelay (unsigned long usecs) +{ + unsigned long start = rtc_time(); + unsigned long end = start + + usecs * sn_rtc_cycles_per_second / 1000000; + + while (time_before((unsigned long)rtc_time(), end)) + cpu_relax(); +} + void __init sn_timer_init(void) { sn2_interpolator.frequency = sn_rtc_cycles_per_second; sn2_interpolator.addr = RTC_COUNTER_ADDR; register_time_interpolator(&sn2_interpolator); + + ia64_udelay = &ia64_sn_udelay; } diff --git a/arch/ia64/sn/kernel/sn2/timer_interrupt.c b/arch/ia64/sn/kernel/sn2/timer_interrupt.c index adf5db2..fa7f699 100644 --- a/arch/ia64/sn/kernel/sn2/timer_interrupt.c +++ b/arch/ia64/sn/kernel/sn2/timer_interrupt.c @@ -1,7 +1,7 @@ /* * * - * Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2005, 2006 Silicon Graphics, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -22,11 +22,6 @@ * License along with this program; if not, write the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * - * Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy, - * Mountain View, CA 94043, or: - * - * http://www.sgi.com - * * For further information regarding this notice, see: * * http://oss.sgi.com/projects/GenInfo/NoticeExplan diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index d263d3e..99cb28e 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -284,12 +284,10 @@ struct sn_irq_info *tiocx_irq_alloc(nasid_t nasid, int widget, int irq, if ((nasid & 1) == 0) return NULL; - sn_irq_info = kmalloc(sn_irq_size, GFP_KERNEL); + sn_irq_info = kzalloc(sn_irq_size, GFP_KERNEL); if (sn_irq_info == NULL) return NULL; - memset(sn_irq_info, 0x0, sn_irq_size); - status = tiocx_intr_alloc(nasid, widget, __pa(sn_irq_info), irq, req_nasid, slice); if (status) { @@ -486,7 +484,7 @@ static int __init tiocx_init(void) int found_tiocx_device = 0; if (!ia64_platform_is("sn2")) - return -ENODEV; + return 0; bus_register(&tiocx_bus_type); diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index 36e5437..cdf6856 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -738,7 +738,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* make sure all activity has settled down first */ - if (atomic_read(&ch->references) > 0) { + if (atomic_read(&ch->references) > 0 || + ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && + !(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE))) { return; } DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0); @@ -775,7 +777,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* both sides are disconnected now */ - if (ch->flags & XPC_C_CONNECTCALLOUT) { + if (ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE) { spin_unlock_irqrestore(&ch->lock, *irq_flags); xpc_disconnect_callout(ch, xpcDisconnected); spin_lock_irqsave(&ch->lock, *irq_flags); @@ -1300,7 +1302,7 @@ xpc_process_msg_IPI(struct xpc_partition *part, int ch_number) "delivered=%d, partid=%d, channel=%d\n", nmsgs_sent, ch->partid, ch->number); - if (ch->flags & XPC_C_CONNECTCALLOUT) { + if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) { xpc_activate_kthreads(ch, nmsgs_sent); } } diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index 9cd460d..8cbf164 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -750,12 +750,16 @@ xpc_daemonize_kthread(void *args) /* let registerer know that connection has been established */ spin_lock_irqsave(&ch->lock, irq_flags); - if (!(ch->flags & XPC_C_CONNECTCALLOUT)) { - ch->flags |= XPC_C_CONNECTCALLOUT; + if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) { + ch->flags |= XPC_C_CONNECTEDCALLOUT; spin_unlock_irqrestore(&ch->lock, irq_flags); xpc_connected_callout(ch); + spin_lock_irqsave(&ch->lock, irq_flags); + ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE; + spin_unlock_irqrestore(&ch->lock, irq_flags); + /* * It is possible that while the callout was being * made that the remote partition sent some messages. @@ -777,15 +781,17 @@ xpc_daemonize_kthread(void *args) if (atomic_dec_return(&ch->kthreads_assigned) == 0) { spin_lock_irqsave(&ch->lock, irq_flags); - if ((ch->flags & XPC_C_CONNECTCALLOUT) && - !(ch->flags & XPC_C_DISCONNECTCALLOUT)) { - ch->flags |= XPC_C_DISCONNECTCALLOUT; + if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && + !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) { + ch->flags |= XPC_C_DISCONNECTINGCALLOUT; spin_unlock_irqrestore(&ch->lock, irq_flags); xpc_disconnect_callout(ch, xpcDisconnecting); - } else { - spin_unlock_irqrestore(&ch->lock, irq_flags); + + spin_lock_irqsave(&ch->lock, irq_flags); + ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE; } + spin_unlock_irqrestore(&ch->lock, irq_flags); if (atomic_dec_return(&part->nchannels_engaged) == 0) { xpc_mark_partition_disengaged(part); xpc_IPI_send_disengage(part); diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 5a36292..b4b84c2 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -335,10 +335,10 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) */ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, - pci_domain_nr(bus), bus->number, - 0, /* io */ - 0, /* read */ - port, size, __pa(val)); + pci_domain_nr(bus), bus->number, + 0, /* io */ + 0, /* read */ + port, size, __pa(val)); if (isrv.status == 0) return size; @@ -381,10 +381,10 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) */ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, - pci_domain_nr(bus), bus->number, - 0, /* io */ - 1, /* write */ - port, size, __pa(&val)); + pci_domain_nr(bus), bus->number, + 0, /* io */ + 1, /* write */ + port, size, __pa(&val)); if (isrv.status == 0) return size; diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c index aa3fa51..1f0253b 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2001-2006 Silicon Graphics, Inc. All rights reserved. */ #include <linux/types.h> @@ -12,7 +12,7 @@ #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> -int pcibr_invalidate_ate = 0; /* by default don't invalidate ATE on free */ +int pcibr_invalidate_ate; /* by default don't invalidate ATE on free */ /* * mark_ate: Mark the ate as either free or inuse. @@ -20,14 +20,12 @@ int pcibr_invalidate_ate = 0; /* by default don't invalidate ATE on free */ static void mark_ate(struct ate_resource *ate_resource, int start, int number, u64 value) { - u64 *ate = ate_resource->ate; int index; int length = 0; for (index = start; length < number; index++, length++) ate[index] = value; - } /* @@ -37,7 +35,6 @@ static void mark_ate(struct ate_resource *ate_resource, int start, int number, static int find_free_ate(struct ate_resource *ate_resource, int start, int count) { - u64 *ate = ate_resource->ate; int index; int start_free; @@ -70,12 +67,10 @@ static int find_free_ate(struct ate_resource *ate_resource, int start, static inline void free_ate_resource(struct ate_resource *ate_resource, int start) { - mark_ate(ate_resource, start, ate_resource->ate[start], 0); if ((ate_resource->lowest_free_index > start) || (ate_resource->lowest_free_index < 0)) ate_resource->lowest_free_index = start; - } /* @@ -84,7 +79,6 @@ static inline void free_ate_resource(struct ate_resource *ate_resource, static inline int alloc_ate_resource(struct ate_resource *ate_resource, int ate_needed) { - int start_index; /* @@ -118,19 +112,12 @@ static inline int alloc_ate_resource(struct ate_resource *ate_resource, */ int pcibr_ate_alloc(struct pcibus_info *pcibus_info, int count) { - int status = 0; - u64 flag; + int status; + unsigned long flags; - flag = pcibr_lock(pcibus_info); + spin_lock_irqsave(&pcibus_info->pbi_lock, flags); status = alloc_ate_resource(&pcibus_info->pbi_int_ate_resource, count); - - if (status < 0) { - /* Failed to allocate */ - pcibr_unlock(pcibus_info, flag); - return -1; - } - - pcibr_unlock(pcibus_info, flag); + spin_unlock_irqrestore(&pcibus_info->pbi_lock, flags); return status; } @@ -182,7 +169,7 @@ void pcibr_ate_free(struct pcibus_info *pcibus_info, int index) ate_write(pcibus_info, index, count, (ate & ~PCI32_ATE_V)); } - flags = pcibr_lock(pcibus_info); + spin_lock_irqsave(&pcibus_info->pbi_lock, flags); free_ate_resource(&pcibus_info->pbi_int_ate_resource, index); - pcibr_unlock(pcibus_info, flags); + spin_unlock_irqrestore(&pcibus_info->pbi_lock, flags); } diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index 54ce5b7..9f86bb6 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -137,14 +137,12 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr, pci_addr |= PCI64_ATTR_VIRTUAL; return pci_addr; - } static dma_addr_t pcibr_dmatrans_direct32(struct pcidev_info * info, u64 paddr, size_t req_size, u64 flags) { - struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info; struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info-> pdi_pcibus_info; @@ -171,7 +169,6 @@ pcibr_dmatrans_direct32(struct pcidev_info * info, } return PCI32_DIRECT_BASE | offset; - } /* @@ -218,9 +215,8 @@ void sn_dma_flush(u64 addr) u64 flags; u64 itte; struct hubdev_info *hubinfo; - volatile struct sn_flush_device_kernel *p; - volatile struct sn_flush_device_common *common; - + struct sn_flush_device_kernel *p; + struct sn_flush_device_common *common; struct sn_flush_nasid_entry *flush_nasid_list; if (!sn_ioif_inited) @@ -310,8 +306,7 @@ void sn_dma_flush(u64 addr) (common->sfdl_slot - 1)); } } else { - spin_lock_irqsave((spinlock_t *)&p->sfdl_flush_lock, - flags); + spin_lock_irqsave(&p->sfdl_flush_lock, flags); *common->sfdl_flush_addr = 0; /* force an interrupt. */ @@ -322,8 +317,7 @@ void sn_dma_flush(u64 addr) cpu_relax(); /* okay, everything is synched up. */ - spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock, - flags); + spin_unlock_irqrestore(&p->sfdl_flush_lock, flags); } return; } diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 2fac270..98f716b 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -163,9 +163,12 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont /* Setup the PMU ATE map */ soft->pbi_int_ate_resource.lowest_free_index = 0; soft->pbi_int_ate_resource.ate = - kmalloc(soft->pbi_int_ate_size * sizeof(u64), GFP_KERNEL); - memset(soft->pbi_int_ate_resource.ate, 0, - (soft->pbi_int_ate_size * sizeof(u64))); + kzalloc(soft->pbi_int_ate_size * sizeof(u64), GFP_KERNEL); + + if (!soft->pbi_int_ate_resource.ate) { + kfree(soft); + return NULL; + } if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) { /* TIO PCI Bridge: find nearest node with CPUs */ diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index e52831e..fa073cc 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -15,6 +15,124 @@ #include <asm/sn/pcidev.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/tioce_provider.h> +#include <asm/sn/sn2/sn_hwperf.h> + +/* + * 1/26/2006 + * + * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe + * (taken from the above PV) before and after accessing tioce internal MMR's + * to avoid tioce lockups. + * + * The recipe as taken from the PV: + * + * if(mmr address < 0x45000) { + * if(mmr address == 0 or 0x80) + * mmr wrt or read address 0xc0 + * else if(mmr address == 0x148 or 0x200) + * mmr wrt or read address 0x28 + * else + * mmr wrt or read address 0x158 + * + * do desired mmr access (rd or wrt) + * + * if(mmr address == 0x100) + * mmr wrt or read address 0x38 + * mmr wrt or read address 0xb050 + * } else + * do desired mmr access + * + * According to hw, we can use reads instead of writes to the above addres + * + * Note this WAR can only to be used for accessing internal MMR's in the + * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the + * "Local CE Registers and Memories" and "PCI Compatible Config Space" address + * spaces from table 2-1 of the "CE Programmer's Reference Overview" document. + * + * All registers defined in struct tioce will meet that criteria. + */ + +static void inline +tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (u64)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + u64 mmr_war_offset; + + if (mmr_offset == 0 || mmr_offset == 0x80) + mmr_war_offset = 0xc0; + else if (mmr_offset == 0x148 || mmr_offset == 0x200) + mmr_war_offset = 0x28; + else + mmr_war_offset = 0x158; + + readq_relaxed((void *)(mmr_base + mmr_war_offset)); + } +} + +static void inline +tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr) +{ + u64 mmr_base; + u64 mmr_offset; + + if (kern->ce_common->ce_rev != TIOCE_REV_A) + return; + + mmr_base = kern->ce_common->ce_pcibus.bs_base; + mmr_offset = (u64)mmr_addr - mmr_base; + + if (mmr_offset < 0x45000) { + if (mmr_offset == 0x100) + readq_relaxed((void *)(mmr_base + 0x38)); + readq_relaxed((void *)(mmr_base + 0xb050)); + } +} + +/* load mmr contents into a variable */ +#define tioce_mmr_load(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + *(varp) = readq_relaxed(mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store variable contents into mmr */ +#define tioce_mmr_store(kern, mmrp, varp) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(*varp, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* store immediate value into mmr */ +#define tioce_mmr_storei(kern, mmrp, val) do {\ + tioce_mmr_war_pre(kern, mmrp); \ + writeq(val, mmrp); \ + tioce_mmr_war_post(kern, mmrp); \ +} while (0) + +/* set bits (immediate value) into mmr */ +#define tioce_mmr_seti(kern, mmrp, bits) do {\ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp |= (bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) + +/* clear bits (immediate value) into mmr */ +#define tioce_mmr_clri(kern, mmrp, bits) do { \ + u64 tmp; \ + tioce_mmr_load(kern, mmrp, &tmp); \ + tmp &= ~(bits); \ + tioce_mmr_store(kern, mmrp, &tmp); \ +} while (0) /** * Bus address ranges for the 5 flavors of TIOCE DMA @@ -62,9 +180,9 @@ #define TIOCE_ATE_M40 2 #define TIOCE_ATE_M40S 3 -#define KB(x) ((x) << 10) -#define MB(x) ((x) << 20) -#define GB(x) ((x) << 30) +#define KB(x) ((u64)(x) << 10) +#define MB(x) ((u64)(x) << 20) +#define GB(x) ((u64)(x) << 30) /** * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode @@ -151,7 +269,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, int last; int entries; int nates; - int pagesize; + u64 pagesize; u64 *ate_shadow; u64 *ate_reg; u64 addr; @@ -228,7 +346,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, ate = ATE_MAKE(addr, pagesize); ate_shadow[i + j] = ate; - writeq(ate, &ate_reg[i + j]); + tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate); addr += pagesize; } @@ -272,7 +390,8 @@ tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr) u64 tmp; ce_kern->ce_port[port].dirmap_shadow = ct_upper; - writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + ct_upper); tmp = ce_mmr->ce_ure_dir_map[port]; dma_ok = 1; } else @@ -344,7 +463,8 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) if (TIOCE_D32_ADDR(bus_addr)) { if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { ce_kern->ce_port[port].dirmap_shadow = 0; - writeq(0, &ce_mmr->ce_ure_dir_map[port]); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port], + 0); } } else { struct tioce_dmamap *map; @@ -365,7 +485,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) } else if (--map->refcnt == 0) { for (i = 0; i < map->ate_count; i++) { map->ate_shadow[i] = 0; - map->ate_hw[i] = 0; + tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0); } list_del(&map->ce_dmamap_list); @@ -486,7 +606,7 @@ tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, spin_unlock_irqrestore(&ce_kern->ce_lock, flags); dma_map_done: - if (mapaddr & barrier) + if (mapaddr && barrier) mapaddr = tioce_dma_barrier(mapaddr, 1); return mapaddr; @@ -541,17 +661,61 @@ tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt) soft->ce_pcibus.bs_persist_segment, soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0); + if (ret_stuff.v0) + panic("tioce_error_intr_handler: Fatal TIOCE error"); + return IRQ_HANDLED; } /** + * tioce_reserve_m32 - reserve M32 ate's for the indicated address range + * @tioce_kernel: TIOCE context to reserve ate's for + * @base: starting bus address to reserve + * @limit: last bus address to reserve + * + * If base/limit falls within the range of bus space mapped through the + * M32 space, reserve the resources corresponding to the range. + */ +static void +tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) +{ + int ate_index, last_ate, ps; + struct tioce *ce_mmr; + + if (!TIOCE_M32_ADDR(base)) + return; + + ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; + ps = ce_kern->ce_ate3240_pagesize; + ate_index = ATE_PAGE(base, ps); + last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1; + + if (ate_index < 64) + ate_index = 64; + + while (ate_index <= last_ate) { + u64 ate; + + ate = ATE_MAKE(0xdeadbeef, ps); + ce_kern->ce_ate3240_shadow[ate_index] = ate; + tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index], + ate); + ate_index++; + } +} + +/** * tioce_kern_init - init kernel structures related to a given TIOCE * @tioce_common: ptr to a cached tioce_common struct that originated in prom - */ static struct tioce_kernel * + */ +static struct tioce_kernel * tioce_kern_init(struct tioce_common *tioce_common) { int i; + int ps; + int dev; u32 tmp; + unsigned int seg, bus; struct tioce *tioce_mmr; struct tioce_kernel *tioce_kern; @@ -572,9 +736,10 @@ tioce_kern_init(struct tioce_common *tioce_common) * here to use pci_read_config_xxx() so use the raw_pci_ops vector. */ - raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment, - tioce_common->ce_pcibus.bs_persist_busnum, - PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp); + seg = tioce_common->ce_pcibus.bs_persist_segment; + bus = tioce_common->ce_pcibus.bs_persist_busnum; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp); tioce_kern->ce_port1_secondary = (u8) tmp; /* @@ -583,18 +748,76 @@ tioce_kern_init(struct tioce_common *tioce_common) */ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; - __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK); - __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE); - tioce_kern->ce_ate3240_pagesize = KB(256); + tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_PAGESIZE_MASK); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map, + CE_URE_256K_PAGESIZE); + ps = tioce_kern->ce_ate3240_pagesize = KB(256); for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { tioce_kern->ce_ate40_shadow[i] = 0; - writeq(0, &tioce_mmr->ce_ure_ate40[i]); + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0); } for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { tioce_kern->ce_ate3240_shadow[i] = 0; - writeq(0, &tioce_mmr->ce_ure_ate3240[i]); + tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0); + } + + /* + * Reserve ATE's corresponding to reserved address ranges. These + * include: + * + * Memory space covered by each PPB mem base/limit register + * Memory space covered by each PPB prefetch base/limit register + * + * These bus ranges are for pio (downstream) traffic only, and so + * cannot be used for DMA. + */ + + for (dev = 1; dev <= 2; dev++) { + u64 base, limit; + + /* mem base/limit */ + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_BASE, 2, &tmp); + base = (u64)tmp << 16; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_MEMORY_LIMIT, 2, &tmp); + limit = (u64)tmp << 16; + limit |= 0xfffffUL; + + if (base < limit) + tioce_reserve_m32(tioce_kern, base, limit); + + /* + * prefetch mem base/limit. The tioce ppb's have 64-bit + * decoders, so read the upper portions w/o checking the + * attributes. + */ + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_BASE, 2, &tmp); + base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_BASE_UPPER32, 4, &tmp); + base |= (u64)tmp << 32; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_MEMORY_LIMIT, 2, &tmp); + + limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16; + limit |= 0xfffffUL; + + raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0), + PCI_PREF_LIMIT_UPPER32, 4, &tmp); + limit |= (u64)tmp << 32; + + if ((base < limit) && TIOCE_M32_ADDR(base)) + tioce_reserve_m32(tioce_kern, base, limit); } return tioce_kern; @@ -614,6 +837,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; struct tioce *ce_mmr; u64 force_int_val; @@ -629,6 +853,29 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; + + /* + * TIOCE Rev A workaround (PV 945826), force an interrupt by writing + * the TIO_INTx register directly (1/26/2006) + */ + if (ce_common->ce_rev == TIOCE_REV_A) { + u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit); + u64 status; + + tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status); + if (status & int_bit_mask) { + u64 force_irq = (1 << 8) | sn_irq_info->irq_irq; + u64 ctalk = sn_irq_info->irq_xtalkaddr; + u64 nasid, offset; + + nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT; + offset = (ctalk & CTALK_NODE_OFFSET); + HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq); + } + + return; + } /* * irq_int_bit is originally set up by prom, and holds the interrupt @@ -666,7 +913,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) default: return; } - writeq(force_int_val, &ce_mmr->ce_adm_force_int); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val); } /** @@ -685,6 +932,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) { struct pcidev_info *pcidev_info; struct tioce_common *ce_common; + struct tioce_kernel *ce_kern; struct tioce *ce_mmr; int bit; u64 vector; @@ -695,14 +943,15 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; bit = sn_irq_info->irq_int_bit; - __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT; vector |= sn_irq_info->irq_xtalkaddr; - writeq(vector, &ce_mmr->ce_adm_int_dest[bit]); - __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector); + tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit)); tioce_force_interrupt(sn_irq_info); } @@ -721,7 +970,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) static void * tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { + int my_nasid; + cnodeid_t my_cnode, mem_cnode; struct tioce_common *tioce_common; + struct tioce_kernel *tioce_kern; + struct tioce *tioce_mmr; /* * Allocate kernel bus soft and copy from prom. @@ -734,11 +987,23 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common)); tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET; - if (tioce_kern_init(tioce_common) == NULL) { + tioce_kern = tioce_kern_init(tioce_common); + if (tioce_kern == NULL) { kfree(tioce_common); return NULL; } + /* + * Clear out any transient errors before registering the error + * interrupt handler. + */ + + tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias, + ~0ULL); + tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, ~0ULL); + if (request_irq(SGI_PCIASIC_ERROR, tioce_error_intr_handler, SA_SHIRQ, "TIOCE error", (void *)tioce_common)) @@ -750,6 +1015,21 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont tioce_common->ce_pcibus.bs_persist_segment, tioce_common->ce_pcibus.bs_persist_busnum); + /* + * identify closest nasid for memory allocations + */ + + my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base); + my_cnode = nasid_to_cnodeid(my_nasid); + + if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) { + printk(KERN_WARNING "tioce_bus_fixup: failed to find " + "closest node with MEM to TIO node %d\n", my_cnode); + mem_cnode = (cnodeid_t)-1; /* use any node */ + } + + controller->node = mem_cnode; + return tioce_common; } |