summaryrefslogtreecommitdiff
path: root/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper-board.c')
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-board.c711
1 files changed, 711 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
new file mode 100644
index 0000000..fd20153
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -0,0 +1,711 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ *
+ * Helper functions to abstract board specific data about
+ * network ports from the rest of the cvmx-helper files.
+ */
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-bootinfo.h>
+
+#include <asm/octeon/cvmx-config.h>
+
+#include <asm/octeon/cvmx-mdio.h>
+
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-util.h>
+#include <asm/octeon/cvmx-helper-board.h>
+
+#include <asm/octeon/cvmx-gmxx-defs.h>
+#include <asm/octeon/cvmx-asxx-defs.h>
+
+/**
+ * cvmx_override_board_link_get(int ipd_port) is a function
+ * pointer. It is meant to allow customization of the process of
+ * talking to a PHY to determine link speed. It is called every
+ * time a PHY must be polled for link status. Users should set
+ * this pointer to a function before calling any cvmx-helper
+ * operations.
+ */
+cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) =
+ NULL;
+
+/**
+ * Return the MII PHY address associated with the given IPD
+ * port. A result of -1 means there isn't a MII capable PHY
+ * connected to this port. On chips supporting multiple MII
+ * busses the bus number is encoded in bits <15:8>.
+ *
+ * This function must be modified for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It replies on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @ipd_port: Octeon IPD port to get the MII address for.
+ *
+ * Returns MII PHY address and bus number or -1.
+ */
+int cvmx_helper_board_get_mii_address(int ipd_port)
+{
+ switch (cvmx_sysinfo_get()->board_type) {
+ case CVMX_BOARD_TYPE_SIM:
+ /* Simulator doesn't have MII */
+ return -1;
+ case CVMX_BOARD_TYPE_EBT3000:
+ case CVMX_BOARD_TYPE_EBT5800:
+ case CVMX_BOARD_TYPE_THUNDER:
+ case CVMX_BOARD_TYPE_NICPRO2:
+ /* Interface 0 is SPI4, interface 1 is RGMII */
+ if ((ipd_port >= 16) && (ipd_port < 20))
+ return ipd_port - 16;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_KODAMA:
+ case CVMX_BOARD_TYPE_EBH3100:
+ case CVMX_BOARD_TYPE_HIKARI:
+ case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
+ case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
+ case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
+ /*
+ * Port 0 is WAN connected to a PHY, Port 1 is GMII
+ * connected to a switch
+ */
+ if (ipd_port == 0)
+ return 4;
+ else if (ipd_port == 1)
+ return 9;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_NAC38:
+ /* Board has 8 RGMII ports PHYs are 0-7 */
+ if ((ipd_port >= 0) && (ipd_port < 4))
+ return ipd_port;
+ else if ((ipd_port >= 16) && (ipd_port < 20))
+ return ipd_port - 16 + 4;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_EBH3000:
+ /* Board has dual SPI4 and no PHYs */
+ return -1;
+ case CVMX_BOARD_TYPE_EBH5200:
+ case CVMX_BOARD_TYPE_EBH5201:
+ case CVMX_BOARD_TYPE_EBT5200:
+ /* Board has 2 management ports */
+ if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) &&
+ (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
+ return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT;
+ /*
+ * Board has 4 SGMII ports. The PHYs start right after the MII
+ * ports MII0 = 0, MII1 = 1, SGMII = 2-5.
+ */
+ if ((ipd_port >= 0) && (ipd_port < 4))
+ return ipd_port + 2;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_EBH5600:
+ case CVMX_BOARD_TYPE_EBH5601:
+ case CVMX_BOARD_TYPE_EBH5610:
+ /* Board has 1 management port */
+ if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
+ return 0;
+ /*
+ * Board has 8 SGMII ports. 4 connect out, two connect
+ * to a switch, and 2 loop to each other
+ */
+ if ((ipd_port >= 0) && (ipd_port < 4))
+ return ipd_port + 1;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_CUST_NB5:
+ if (ipd_port == 2)
+ return 4;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_NIC_XLE_4G:
+ /* Board has 4 SGMII ports. connected QLM3(interface 1) */
+ if ((ipd_port >= 16) && (ipd_port < 20))
+ return ipd_port - 16 + 1;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_NIC_XLE_10G:
+ case CVMX_BOARD_TYPE_NIC10E:
+ return -1;
+ case CVMX_BOARD_TYPE_NIC4E:
+ if (ipd_port >= 0 && ipd_port <= 3)
+ return (ipd_port + 0x1f) & 0x1f;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_NIC2E:
+ if (ipd_port >= 0 && ipd_port <= 1)
+ return ipd_port + 1;
+ else
+ return -1;
+ case CVMX_BOARD_TYPE_BBGW_REF:
+ /*
+ * No PHYs are connected to Octeon, everything is
+ * through switch.
+ */
+ return -1;
+
+ case CVMX_BOARD_TYPE_CUST_WSX16:
+ if (ipd_port >= 0 && ipd_port <= 3)
+ return ipd_port;
+ else if (ipd_port >= 16 && ipd_port <= 19)
+ return ipd_port - 16 + 4;
+ else
+ return -1;
+ }
+
+ /* Some unknown board. Somebody forgot to update this function... */
+ cvmx_dprintf
+ ("cvmx_helper_board_get_mii_address: Unknown board type %d\n",
+ cvmx_sysinfo_get()->board_type);
+ return -1;
+}
+
+/**
+ * This function is the board specific method of determining an
+ * ethernet ports link speed. Most Octeon boards have Marvell PHYs
+ * and are handled by the fall through case. This function must be
+ * updated for boards that don't have the normal Marvell PHYs.
+ *
+ * This function must be modified for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relies on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @ipd_port: IPD input port associated with the port we want to get link
+ * status for.
+ *
+ * Returns The ports link status. If the link isn't fully resolved, this must
+ * return zero.
+ */
+cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
+{
+ cvmx_helper_link_info_t result;
+ int phy_addr;
+ int is_broadcom_phy = 0;
+
+ /* Give the user a chance to override the processing of this function */
+ if (cvmx_override_board_link_get)
+ return cvmx_override_board_link_get(ipd_port);
+
+ /* Unless we fix it later, all links are defaulted to down */
+ result.u64 = 0;
+
+ /*
+ * This switch statement should handle all ports that either don't use
+ * Marvell PHYS, or don't support in-band status.
+ */
+ switch (cvmx_sysinfo_get()->board_type) {
+ case CVMX_BOARD_TYPE_SIM:
+ /* The simulator gives you a simulated 1Gbps full duplex link */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ case CVMX_BOARD_TYPE_EBH3100:
+ case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
+ case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
+ case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
+ /* Port 1 on these boards is always Gigabit */
+ if (ipd_port == 1) {
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ }
+ /* Fall through to the generic code below */
+ break;
+ case CVMX_BOARD_TYPE_CUST_NB5:
+ /* Port 1 on these boards is always Gigabit */
+ if (ipd_port == 1) {
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ } else /* The other port uses a broadcom PHY */
+ is_broadcom_phy = 1;
+ break;
+ case CVMX_BOARD_TYPE_BBGW_REF:
+ /* Port 1 on these boards is always Gigabit */
+ if (ipd_port == 2) {
+ /* Port 2 is not hooked up */
+ result.u64 = 0;
+ return result;
+ } else {
+ /* Ports 0 and 1 connect to the switch */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ }
+ break;
+ }
+
+ phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
+ if (phy_addr != -1) {
+ if (is_broadcom_phy) {
+ /*
+ * Below we are going to read SMI/MDIO
+ * register 0x19 which works on Broadcom
+ * parts
+ */
+ int phy_status =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ 0x19);
+ switch ((phy_status >> 8) & 0x7) {
+ case 0:
+ result.u64 = 0;
+ break;
+ case 1:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 10;
+ break;
+ case 2:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 10;
+ break;
+ case 3:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 100;
+ break;
+ case 4:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 100;
+ break;
+ case 5:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 100;
+ break;
+ case 6:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 1000;
+ break;
+ case 7:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ break;
+ }
+ } else {
+ /*
+ * This code assumes we are using a Marvell
+ * Gigabit PHY. All the speed information can
+ * be read from register 17 in one
+ * go. Somebody using a different PHY will
+ * need to handle it above in the board
+ * specific area.
+ */
+ int phy_status =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
+
+ /*
+ * If the resolve bit 11 isn't set, see if
+ * autoneg is turned off (bit 12, reg 0). The
+ * resolve bit doesn't get set properly when
+ * autoneg is off, so force it.
+ */
+ if ((phy_status & (1 << 11)) == 0) {
+ int auto_status =
+ cvmx_mdio_read(phy_addr >> 8,
+ phy_addr & 0xff, 0);
+ if ((auto_status & (1 << 12)) == 0)
+ phy_status |= 1 << 11;
+ }
+
+ /*
+ * Only return a link if the PHY has finished
+ * auto negotiation and set the resolved bit
+ * (bit 11)
+ */
+ if (phy_status & (1 << 11)) {
+ result.s.link_up = 1;
+ result.s.full_duplex = ((phy_status >> 13) & 1);
+ switch ((phy_status >> 14) & 3) {
+ case 0: /* 10 Mbps */
+ result.s.speed = 10;
+ break;
+ case 1: /* 100 Mbps */
+ result.s.speed = 100;
+ break;
+ case 2: /* 1 Gbps */
+ result.s.speed = 1000;
+ break;
+ case 3: /* Illegal */
+ result.u64 = 0;
+ break;
+ }
+ }
+ }
+ } else if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
+ || OCTEON_IS_MODEL(OCTEON_CN58XX)
+ || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
+ /*
+ * We don't have a PHY address, so attempt to use
+ * in-band status. It is really important that boards
+ * not supporting in-band status never get
+ * here. Reading broken in-band status tends to do bad
+ * things
+ */
+ union cvmx_gmxx_rxx_rx_inbnd inband_status;
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+ inband_status.u64 =
+ cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface));
+
+ result.s.link_up = inband_status.s.status;
+ result.s.full_duplex = inband_status.s.duplex;
+ switch (inband_status.s.speed) {
+ case 0: /* 10 Mbps */
+ result.s.speed = 10;
+ break;
+ case 1: /* 100 Mbps */
+ result.s.speed = 100;
+ break;
+ case 2: /* 1 Gbps */
+ result.s.speed = 1000;
+ break;
+ case 3: /* Illegal */
+ result.u64 = 0;
+ break;
+ }
+ } else {
+ /*
+ * We don't have a PHY address and we don't have
+ * in-band status. There is no way to determine the
+ * link speed. Return down assuming this port isn't
+ * wired
+ */
+ result.u64 = 0;
+ }
+
+ /* If link is down, return all fields as zero. */
+ if (!result.s.link_up)
+ result.u64 = 0;
+
+ return result;
+}
+
+/**
+ * This function as a board specific method of changing the PHY
+ * speed, duplex, and auto-negotiation. This programs the PHY and
+ * not Octeon. This can be used to force Octeon's links to
+ * specific settings.
+ *
+ * @phy_addr: The address of the PHY to program
+ * @enable_autoneg:
+ * Non zero if you want to enable auto-negotiation.
+ * @link_info: Link speed to program. If the speed is zero and auto-negotiation
+ * is enabled, all possible negotiation speeds are advertised.
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_board_link_set_phy(int phy_addr,
+ cvmx_helper_board_set_phy_link_flags_types_t
+ link_flags,
+ cvmx_helper_link_info_t link_info)
+{
+
+ /* Set the flow control settings based on link_flags */
+ if ((link_flags & set_phy_link_flags_flow_control_mask) !=
+ set_phy_link_flags_flow_control_dont_touch) {
+ cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+ reg_autoneg_adver.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+ reg_autoneg_adver.s.asymmetric_pause =
+ (link_flags & set_phy_link_flags_flow_control_mask) ==
+ set_phy_link_flags_flow_control_enable;
+ reg_autoneg_adver.s.pause =
+ (link_flags & set_phy_link_flags_flow_control_mask) ==
+ set_phy_link_flags_flow_control_enable;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+ reg_autoneg_adver.u16);
+ }
+
+ /* If speed isn't set and autoneg is on advertise all supported modes */
+ if ((link_flags & set_phy_link_flags_autoneg)
+ && (link_info.s.speed == 0)) {
+ cvmx_mdio_phy_reg_control_t reg_control;
+ cvmx_mdio_phy_reg_status_t reg_status;
+ cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+ cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
+ cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
+
+ reg_status.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_STATUS);
+ reg_autoneg_adver.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+ reg_autoneg_adver.s.advert_100base_t4 =
+ reg_status.s.capable_100base_t4;
+ reg_autoneg_adver.s.advert_10base_tx_full =
+ reg_status.s.capable_10_full;
+ reg_autoneg_adver.s.advert_10base_tx_half =
+ reg_status.s.capable_10_half;
+ reg_autoneg_adver.s.advert_100base_tx_full =
+ reg_status.s.capable_100base_x_full;
+ reg_autoneg_adver.s.advert_100base_tx_half =
+ reg_status.s.capable_100base_x_half;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+ reg_autoneg_adver.u16);
+ if (reg_status.s.capable_extended_status) {
+ reg_extended_status.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
+ reg_control_1000.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL_1000);
+ reg_control_1000.s.advert_1000base_t_full =
+ reg_extended_status.s.capable_1000base_t_full;
+ reg_control_1000.s.advert_1000base_t_half =
+ reg_extended_status.s.capable_1000base_t_half;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL_1000,
+ reg_control_1000.u16);
+ }
+ reg_control.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL);
+ reg_control.s.autoneg_enable = 1;
+ reg_control.s.restart_autoneg = 1;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+ } else if ((link_flags & set_phy_link_flags_autoneg)) {
+ cvmx_mdio_phy_reg_control_t reg_control;
+ cvmx_mdio_phy_reg_status_t reg_status;
+ cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+ cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
+
+ reg_status.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_STATUS);
+ reg_autoneg_adver.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+ reg_autoneg_adver.s.advert_100base_t4 = 0;
+ reg_autoneg_adver.s.advert_10base_tx_full = 0;
+ reg_autoneg_adver.s.advert_10base_tx_half = 0;
+ reg_autoneg_adver.s.advert_100base_tx_full = 0;
+ reg_autoneg_adver.s.advert_100base_tx_half = 0;
+ if (reg_status.s.capable_extended_status) {
+ reg_control_1000.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL_1000);
+ reg_control_1000.s.advert_1000base_t_full = 0;
+ reg_control_1000.s.advert_1000base_t_half = 0;
+ }
+ switch (link_info.s.speed) {
+ case 10:
+ reg_autoneg_adver.s.advert_10base_tx_full =
+ link_info.s.full_duplex;
+ reg_autoneg_adver.s.advert_10base_tx_half =
+ !link_info.s.full_duplex;
+ break;
+ case 100:
+ reg_autoneg_adver.s.advert_100base_tx_full =
+ link_info.s.full_duplex;
+ reg_autoneg_adver.s.advert_100base_tx_half =
+ !link_info.s.full_duplex;
+ break;
+ case 1000:
+ reg_control_1000.s.advert_1000base_t_full =
+ link_info.s.full_duplex;
+ reg_control_1000.s.advert_1000base_t_half =
+ !link_info.s.full_duplex;
+ break;
+ }
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+ reg_autoneg_adver.u16);
+ if (reg_status.s.capable_extended_status)
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL_1000,
+ reg_control_1000.u16);
+ reg_control.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL);
+ reg_control.s.autoneg_enable = 1;
+ reg_control.s.restart_autoneg = 1;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+ } else {
+ cvmx_mdio_phy_reg_control_t reg_control;
+ reg_control.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL);
+ reg_control.s.autoneg_enable = 0;
+ reg_control.s.restart_autoneg = 1;
+ reg_control.s.duplex = link_info.s.full_duplex;
+ if (link_info.s.speed == 1000) {
+ reg_control.s.speed_msb = 1;
+ reg_control.s.speed_lsb = 0;
+ } else if (link_info.s.speed == 100) {
+ reg_control.s.speed_msb = 0;
+ reg_control.s.speed_lsb = 1;
+ } else if (link_info.s.speed == 10) {
+ reg_control.s.speed_msb = 0;
+ reg_control.s.speed_lsb = 0;
+ }
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+ }
+ return 0;
+}
+
+/**
+ * This function is called by cvmx_helper_interface_probe() after it
+ * determines the number of ports Octeon can support on a specific
+ * interface. This function is the per board location to override
+ * this value. It is called with the number of ports Octeon might
+ * support and should return the number of actual ports on the
+ * board.
+ *
+ * This function must be modifed for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relys on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @interface: Interface to probe
+ * @supported_ports:
+ * Number of ports Octeon supports.
+ *
+ * Returns Number of ports the actual board supports. Many times this will
+ * simple be "support_ports".
+ */
+int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
+{
+ switch (cvmx_sysinfo_get()->board_type) {
+ case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
+ if (interface == 0)
+ return 2;
+ break;
+ case CVMX_BOARD_TYPE_BBGW_REF:
+ if (interface == 0)
+ return 2;
+ break;
+ case CVMX_BOARD_TYPE_NIC_XLE_4G:
+ if (interface == 0)
+ return 0;
+ break;
+ /* The 2nd interface on the EBH5600 is connected to the Marvel switch,
+ which we don't support. Disable ports connected to it */
+ case CVMX_BOARD_TYPE_EBH5600:
+ if (interface == 1)
+ return 0;
+ break;
+ }
+ return supported_ports;
+}
+
+/**
+ * Enable packet input/output from the hardware. This function is
+ * called after by cvmx_helper_packet_hardware_enable() to
+ * perform board specific initialization. For most boards
+ * nothing is needed.
+ *
+ * @interface: Interface to enable
+ *
+ * Returns Zero on success, negative on failure
+ */
+int __cvmx_helper_board_hardware_enable(int interface)
+{
+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) {
+ if (interface == 0) {
+ /* Different config for switch port */
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0);
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
+ /*
+ * Boards with gigabit WAN ports need a
+ * different setting that is compatible with
+ * 100 Mbit settings
+ */
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface),
+ 0xc);
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface),
+ 0xc);
+ }
+ } else if (cvmx_sysinfo_get()->board_type ==
+ CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
+ /*
+ * Broadcom PHYs require differnet ASX
+ * clocks. Unfortunately many boards don't define a
+ * new board Id and simply mangle the
+ * CN3010_EVB_HS5
+ */
+ if (interface == 0) {
+ /*
+ * Some boards use a hacked up bootloader that
+ * identifies them as CN3010_EVB_HS5
+ * evaluation boards. This leads to all kinds
+ * of configuration problems. Detect one
+ * case, and print warning, while trying to do
+ * the right thing.
+ */
+ int phy_addr = cvmx_helper_board_get_mii_address(0);
+ if (phy_addr != -1) {
+ int phy_identifier =
+ cvmx_mdio_read(phy_addr >> 8,
+ phy_addr & 0xff, 0x2);
+ /* Is it a Broadcom PHY? */
+ if (phy_identifier == 0x0143) {
+ cvmx_dprintf("\n");
+ cvmx_dprintf("ERROR:\n");
+ cvmx_dprintf
+ ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
+ cvmx_dprintf
+ ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n");
+ cvmx_dprintf
+ ("ERROR: All boards require a unique board type to identify them.\n");
+ cvmx_dprintf("ERROR:\n");
+ cvmx_dprintf("\n");
+ cvmx_wait(1000000000);
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX
+ (0, interface), 5);
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX
+ (0, interface), 5);
+ }
+ }
+ }
+ }
+ return 0;
+}