diff options
Diffstat (limited to 'arch/mips')
100 files changed, 3167 insertions, 1001 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 87d50d7..0cb6f5f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -18,7 +18,7 @@ config MIPS select HAVE_KRETPROBES select HAVE_DEBUG_KMEMLEAK select ARCH_BINFMT_ELF_RANDOMIZE_PIE - select HAVE_ARCH_TRANSPARENT_HUGEPAGE + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT select RTC_LIB if !MACH_LOONGSON select GENERIC_ATOMIC64 if !64BIT select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE @@ -38,7 +38,7 @@ config MIPS select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE select HAVE_MOD_ARCH_SPECIFIC - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_REL if MODULES select MODULES_USE_ELF_RELA if MODULES && 64BIT select CLONE_BACKWARDS @@ -306,7 +306,6 @@ config MIPS_MALTA select HW_HAS_PCI select I8253 select I8259 - select MIPS_BOARDS_GEN select MIPS_BONITO64 select MIPS_CPU_SCACHE select PCI_GT64XXX_PCI0 @@ -342,7 +341,6 @@ config MIPS_SEAD3 select DMA_NONCOHERENT select IRQ_CPU select IRQ_GIC - select MIPS_BOARDS_GEN select MIPS_CPU_SCACHE select MIPS_MSC select SYS_HAS_CPU_MIPS32_R1 @@ -657,7 +655,7 @@ config SNI_RM bool "SNI RM200/300/400" select FW_ARC if CPU_LITTLE_ENDIAN select FW_ARC32 if CPU_LITTLE_ENDIAN - select SNIPROM if CPU_BIG_ENDIAN + select FW_SNIPROM if CPU_BIG_ENDIAN select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select CEVT_R4K @@ -983,9 +981,6 @@ config MIPS_MSC config MIPS_NILE4 bool -config MIPS_DISABLE_OBSOLETE_IDE - bool - config SYNC_R4K bool @@ -1079,9 +1074,6 @@ config IRQ_GT641XX config IRQ_GIC bool -config MIPS_BOARDS_GEN - bool - config PCI_GT64XXX_PCI0 bool @@ -1144,7 +1136,7 @@ config DEFAULT_SGI_PARTITION config FW_ARC32 bool -config SNIPROM +config FW_SNIPROM bool config BOOT_ELF32 @@ -1152,7 +1144,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int - default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL + default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X default "6" if MIPS_CPU_SCACHE default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON default "5" @@ -1494,7 +1486,6 @@ config CPU_XLP select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM - select CPU_HAS_LLSC select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC select CPU_HAS_PREFETCH diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index c8862bd..7032ac7 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -31,7 +31,6 @@ config MIPS_DB1000 select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -41,7 +40,6 @@ config MIPS_DB1235 select ARCH_REQUIRE_GPIOLIB select HW_HAS_PCI select DMA_COHERENT - select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -57,7 +55,6 @@ config MIPS_GPR select ALCHEMY_GPIOINT_AU1000 select HW_HAS_PCI select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index fa1bdd1..b3afcdd 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -5,32 +5,14 @@ platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/ # -# AMD Alchemy Pb1100 eval board -# -platform-$(CONFIG_MIPS_PB1100) += alchemy/devboards/ -load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000 - -# -# AMD Alchemy Pb1500 eval board -# -platform-$(CONFIG_MIPS_PB1500) += alchemy/devboards/ -load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000 - -# -# AMD Alchemy Pb1550 eval board -# -platform-$(CONFIG_MIPS_PB1550) += alchemy/devboards/ -load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 - -# -# AMD Alchemy Db1000/Db1500/Db1100 eval boards +# AMD Alchemy Db1000/Db1500/Pb1500/Db1100/Pb1100 eval boards # platform-$(CONFIG_MIPS_DB1000) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 # -# AMD Alchemy Db1200/Pb1200/Db1550/Db1300 eval boards +# AMD Alchemy Db1200/Pb1200/Db1550/Pb1550/Db1300 eval boards # platform-$(CONFIG_MIPS_DB1235) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1235) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index d5b3c90..a0233a2 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -51,20 +51,6 @@ static void ath79_halt(void) cpu_wait(); } -static void __init ath79_detect_mem_size(void) -{ - unsigned long size; - - for (size = ATH79_MEM_SIZE_MIN; size < ATH79_MEM_SIZE_MAX; - size <<= 1) { - if (!memcmp(ath79_detect_mem_size, - ath79_detect_mem_size + size, 1024)) - break; - } - - add_memory_region(0, size, BOOT_MEM_RAM); -} - static void __init ath79_detect_sys_type(void) { char *chip = "????"; @@ -212,7 +198,7 @@ void __init plat_mem_setup(void) AR71XX_DDR_CTRL_SIZE); ath79_detect_sys_type(); - ath79_detect_mem_size(); + detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); ath79_clocks_init(); _machine_restart = ath79_restart; diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig index d03e879..5639662 100644 --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig @@ -25,6 +25,10 @@ config BCM63XX_CPU_6358 bool "support 6358 CPU" select HW_HAS_PCI +config BCM63XX_CPU_6362 + bool "support 6362 CPU" + select HW_HAS_PCI + config BCM63XX_CPU_6368 bool "support 6368 CPU" select HW_HAS_PCI diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index ed1949c..a9505c4 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -726,11 +726,11 @@ void __init board_prom_init(void) u32 val; /* read base address of boot chip select (0) - * 6328 does not have MPI but boots from a fixed address + * 6328/6362 do not have MPI but boot from a fixed address */ - if (BCMCPU_IS_6328()) + if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) { val = 0x18000000; - else { + } else { val = bcm_mpi_readl(MPI_CSBASE_REG(0)); val &= MPI_CSBASE_BASE_MASK; } @@ -745,10 +745,7 @@ void __init board_prom_init(void) strcpy(cfe_version, "unknown"); printk(KERN_INFO PFX "CFE version: %s\n", cfe_version); - if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) { - printk(KERN_ERR PFX "invalid nvram checksum\n"); - return; - } + bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET); board_name = bcm63xx_nvram_get_name(); /* find board by name */ diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c index b9e948d..c726a97 100644 --- a/arch/mips/bcm63xx/clk.c +++ b/arch/mips/bcm63xx/clk.c @@ -15,7 +15,13 @@ #include <bcm63xx_io.h> #include <bcm63xx_regs.h> #include <bcm63xx_reset.h> -#include <bcm63xx_clk.h> + +struct clk { + void (*set)(struct clk *, int); + unsigned int rate; + unsigned int usage; + int id; +}; static DEFINE_MUTEX(clocks_mutex); @@ -119,11 +125,18 @@ static struct clk clk_ephy = { */ static void enetsw_set(struct clk *clk, int enable) { - if (!BCMCPU_IS_6368()) + if (BCMCPU_IS_6328()) + bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable); + else if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable); + else if (BCMCPU_IS_6368()) + bcm_hwclock_set(CKCTL_6368_ROBOSW_EN | + CKCTL_6368_SWPKT_USB_EN | + CKCTL_6368_SWPKT_SAR_EN, + enable); + else return; - bcm_hwclock_set(CKCTL_6368_ROBOSW_EN | - CKCTL_6368_SWPKT_USB_EN | - CKCTL_6368_SWPKT_SAR_EN, enable); + if (enable) { /* reset switch core afer clock change */ bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1); @@ -160,6 +173,8 @@ static void usbh_set(struct clk *clk, int enable) bcm_hwclock_set(CKCTL_6328_USBH_EN, enable); else if (BCMCPU_IS_6348()) bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); + else if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_USBH_EN, enable); else if (BCMCPU_IS_6368()) bcm_hwclock_set(CKCTL_6368_USBH_EN, enable); } @@ -175,6 +190,8 @@ static void usbd_set(struct clk *clk, int enable) { if (BCMCPU_IS_6328()) bcm_hwclock_set(CKCTL_6328_USBD_EN, enable); + else if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_USBD_EN, enable); else if (BCMCPU_IS_6368()) bcm_hwclock_set(CKCTL_6368_USBD_EN, enable); } @@ -196,6 +213,8 @@ static void spi_set(struct clk *clk, int enable) mask = CKCTL_6348_SPI_EN; else if (BCMCPU_IS_6358()) mask = CKCTL_6358_SPI_EN; + else if (BCMCPU_IS_6362()) + mask = CKCTL_6362_SPI_EN; else /* BCMCPU_IS_6368 */ mask = CKCTL_6368_SPI_EN; @@ -236,7 +255,10 @@ static struct clk clk_xtm = { */ static void ipsec_set(struct clk *clk, int enable) { - bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable); + if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_IPSEC_EN, enable); + else if (BCMCPU_IS_6368()) + bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable); } static struct clk clk_ipsec = { @@ -249,7 +271,10 @@ static struct clk clk_ipsec = { static void pcie_set(struct clk *clk, int enable) { - bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable); + if (BCMCPU_IS_6328()) + bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable); + else if (BCMCPU_IS_6362()) + bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable); } static struct clk clk_pcie = { @@ -315,9 +340,9 @@ struct clk *clk_get(struct device *dev, const char *id) return &clk_periph; if (BCMCPU_IS_6358() && !strcmp(id, "pcm")) return &clk_pcm; - if (BCMCPU_IS_6368() && !strcmp(id, "ipsec")) + if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec")) return &clk_ipsec; - if (BCMCPU_IS_6328() && !strcmp(id, "pcie")) + if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie")) return &clk_pcie; return ERR_PTR(-ENOENT); } diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index a7afb28..79fe32d 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -25,7 +25,7 @@ const int *bcm63xx_irqs; EXPORT_SYMBOL(bcm63xx_irqs); static u16 bcm63xx_cpu_id; -static u16 bcm63xx_cpu_rev; +static u8 bcm63xx_cpu_rev; static unsigned int bcm63xx_cpu_freq; static unsigned int bcm63xx_memory_size; @@ -71,6 +71,15 @@ static const int bcm6358_irqs[] = { }; +static const unsigned long bcm6362_regs_base[] = { + __GEN_CPU_REGS_TABLE(6362) +}; + +static const int bcm6362_irqs[] = { + __GEN_CPU_IRQ_TABLE(6362) + +}; + static const unsigned long bcm6368_regs_base[] = { __GEN_CPU_REGS_TABLE(6368) }; @@ -87,7 +96,7 @@ u16 __bcm63xx_get_cpu_id(void) EXPORT_SYMBOL(__bcm63xx_get_cpu_id); -u16 bcm63xx_get_cpu_rev(void) +u8 bcm63xx_get_cpu_rev(void) { return bcm63xx_cpu_rev; } @@ -169,6 +178,42 @@ static unsigned int detect_cpu_clock(void) return (16 * 1000000 * n1 * n2) / m1; } + case BCM6362_CPU_ID: + { + unsigned int tmp, mips_pll_fcvo; + + tmp = bcm_misc_readl(MISC_STRAPBUS_6362_REG); + mips_pll_fcvo = (tmp & STRAPBUS_6362_FCVO_MASK) + >> STRAPBUS_6362_FCVO_SHIFT; + switch (mips_pll_fcvo) { + case 0x03: + case 0x0b: + case 0x13: + case 0x1b: + return 240000000; + case 0x04: + case 0x0c: + case 0x14: + case 0x1c: + return 160000000; + case 0x05: + case 0x0e: + case 0x16: + case 0x1e: + case 0x1f: + return 400000000; + case 0x06: + return 440000000; + case 0x07: + case 0x17: + return 384000000; + case 0x15: + case 0x1d: + return 200000000; + default: + return 320000000; + } + } case BCM6368_CPU_ID: { unsigned int tmp, p1, p2, ndiv, m1; @@ -205,7 +250,7 @@ static unsigned int detect_memory_size(void) unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; u32 val; - if (BCMCPU_IS_6328()) + if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) return bcm_ddr_readl(DDR_CSEND_REG) << 24; if (BCMCPU_IS_6345()) { @@ -240,53 +285,27 @@ static unsigned int detect_memory_size(void) void __init bcm63xx_cpu_init(void) { - unsigned int tmp, expected_cpu_id; + unsigned int tmp; struct cpuinfo_mips *c = ¤t_cpu_data; unsigned int cpu = smp_processor_id(); + u32 chipid_reg; /* soc registers location depends on cpu type */ - expected_cpu_id = 0; + chipid_reg = 0; switch (c->cputype) { case CPU_BMIPS3300: - if ((read_c0_prid() & 0xff00) == PRID_IMP_BMIPS3300_ALT) { - expected_cpu_id = BCM6348_CPU_ID; - bcm63xx_regs_base = bcm6348_regs_base; - bcm63xx_irqs = bcm6348_irqs; - } else { + if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT) __cpu_name[cpu] = "Broadcom BCM6338"; - expected_cpu_id = BCM6338_CPU_ID; - bcm63xx_regs_base = bcm6338_regs_base; - bcm63xx_irqs = bcm6338_irqs; - } - break; + /* fall-through */ case CPU_BMIPS32: - expected_cpu_id = BCM6345_CPU_ID; - bcm63xx_regs_base = bcm6345_regs_base; - bcm63xx_irqs = bcm6345_irqs; + chipid_reg = BCM_6345_PERF_BASE; break; case CPU_BMIPS4350: - if ((read_c0_prid() & 0xf0) == 0x10) { - expected_cpu_id = BCM6358_CPU_ID; - bcm63xx_regs_base = bcm6358_regs_base; - bcm63xx_irqs = bcm6358_irqs; - } else { - /* all newer chips have the same chip id location */ - u16 chip_id = bcm_readw(BCM_6368_PERF_BASE); - - switch (chip_id) { - case BCM6328_CPU_ID: - expected_cpu_id = BCM6328_CPU_ID; - bcm63xx_regs_base = bcm6328_regs_base; - bcm63xx_irqs = bcm6328_irqs; - break; - case BCM6368_CPU_ID: - expected_cpu_id = BCM6368_CPU_ID; - bcm63xx_regs_base = bcm6368_regs_base; - bcm63xx_irqs = bcm6368_irqs; - break; - } - } + if ((read_c0_prid() & 0xf0) == 0x10) + chipid_reg = BCM_6345_PERF_BASE; + else + chipid_reg = BCM_6368_PERF_BASE; break; } @@ -294,20 +313,47 @@ void __init bcm63xx_cpu_init(void) * really early to panic, but delaying panic would not help since we * will never get any working console */ - if (!expected_cpu_id) + if (!chipid_reg) panic("unsupported Broadcom CPU"); - /* - * bcm63xx_regs_base is set, we can access soc registers - */ - - /* double check CPU type */ - tmp = bcm_perf_readl(PERF_REV_REG); + /* read out CPU type */ + tmp = bcm_readl(chipid_reg); bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; - if (bcm63xx_cpu_id != expected_cpu_id) - panic("bcm63xx CPU id mismatch"); + switch (bcm63xx_cpu_id) { + case BCM6328_CPU_ID: + bcm63xx_regs_base = bcm6328_regs_base; + bcm63xx_irqs = bcm6328_irqs; + break; + case BCM6338_CPU_ID: + bcm63xx_regs_base = bcm6338_regs_base; + bcm63xx_irqs = bcm6338_irqs; + break; + case BCM6345_CPU_ID: + bcm63xx_regs_base = bcm6345_regs_base; + bcm63xx_irqs = bcm6345_irqs; + break; + case BCM6348_CPU_ID: + bcm63xx_regs_base = bcm6348_regs_base; + bcm63xx_irqs = bcm6348_irqs; + break; + case BCM6358_CPU_ID: + bcm63xx_regs_base = bcm6358_regs_base; + bcm63xx_irqs = bcm6358_irqs; + break; + case BCM6362_CPU_ID: + bcm63xx_regs_base = bcm6362_regs_base; + bcm63xx_irqs = bcm6362_irqs; + break; + case BCM6368_CPU_ID: + bcm63xx_regs_base = bcm6368_regs_base; + bcm63xx_irqs = bcm6368_irqs; + break; + default: + panic("unsupported broadcom CPU %x", bcm63xx_cpu_id); + break; + } bcm63xx_cpu_freq = detect_cpu_clock(); bcm63xx_memory_size = detect_memory_size(); diff --git a/arch/mips/bcm63xx/dev-flash.c b/arch/mips/bcm63xx/dev-flash.c index 58371c7..588d1ec 100644 --- a/arch/mips/bcm63xx/dev-flash.c +++ b/arch/mips/bcm63xx/dev-flash.c @@ -77,6 +77,12 @@ static int __init bcm63xx_detect_flash_type(void) return BCM63XX_FLASH_TYPE_PARALLEL; else return BCM63XX_FLASH_TYPE_SERIAL; + case BCM6362_CPU_ID: + val = bcm_misc_readl(MISC_STRAPBUS_6362_REG); + if (val & STRAPBUS_6362_BOOT_SEL_SERIAL) + return BCM63XX_FLASH_TYPE_SERIAL; + else + return BCM63XX_FLASH_TYPE_NAND; case BCM6368_CPU_ID: val = bcm_gpio_readl(GPIO_STRAPBUS_REG); switch (val & STRAPBUS_6368_BOOT_SEL_MASK) { diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c index f1c9c3e..854e936 100644 --- a/arch/mips/bcm63xx/dev-spi.c +++ b/arch/mips/bcm63xx/dev-spi.c @@ -22,10 +22,6 @@ /* * register offsets */ -static const unsigned long bcm6338_regs_spi[] = { - __GEN_SPI_REGS_TABLE(6338) -}; - static const unsigned long bcm6348_regs_spi[] = { __GEN_SPI_REGS_TABLE(6348) }; @@ -34,23 +30,15 @@ static const unsigned long bcm6358_regs_spi[] = { __GEN_SPI_REGS_TABLE(6358) }; -static const unsigned long bcm6368_regs_spi[] = { - __GEN_SPI_REGS_TABLE(6368) -}; - const unsigned long *bcm63xx_regs_spi; EXPORT_SYMBOL(bcm63xx_regs_spi); static __init void bcm63xx_spi_regs_init(void) { - if (BCMCPU_IS_6338()) - bcm63xx_regs_spi = bcm6338_regs_spi; - if (BCMCPU_IS_6348()) + if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) bcm63xx_regs_spi = bcm6348_regs_spi; - if (BCMCPU_IS_6358()) + if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) bcm63xx_regs_spi = bcm6358_regs_spi; - if (BCMCPU_IS_6368()) - bcm63xx_regs_spi = bcm6368_regs_spi; } #else static __init void bcm63xx_spi_regs_init(void) { } @@ -104,13 +92,13 @@ int __init bcm63xx_spi_register(void) spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI); if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { - spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1; - spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE; - spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT; - spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH; + spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1; + spi_pdata.fifo_size = SPI_6348_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6348_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH; } - if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { + if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) { spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE; spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT; diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c index da24c2b..c0ab388 100644 --- a/arch/mips/bcm63xx/irq.c +++ b/arch/mips/bcm63xx/irq.c @@ -82,6 +82,17 @@ static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused; #define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6358 #define ext_irq_cfg_reg2 0 #endif +#ifdef CONFIG_BCM63XX_CPU_6362 +#define irq_stat_reg PERF_IRQSTAT_6362_REG +#define irq_mask_reg PERF_IRQMASK_6362_REG +#define irq_bits 64 +#define is_ext_irq_cascaded 1 +#define ext_irq_start (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE) +#define ext_irq_end (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE) +#define ext_irq_count 4 +#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6362 +#define ext_irq_cfg_reg2 0 +#endif #ifdef CONFIG_BCM63XX_CPU_6368 #define irq_stat_reg PERF_IRQSTAT_6368_REG #define irq_mask_reg PERF_IRQMASK_6368_REG @@ -170,6 +181,16 @@ static void bcm63xx_init_irq(void) ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE; ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358; break; + case BCM6362_CPU_ID: + irq_stat_addr += PERF_IRQSTAT_6362_REG; + irq_mask_addr += PERF_IRQMASK_6362_REG; + irq_bits = 64; + ext_irq_count = 4; + is_ext_irq_cascaded = 1; + ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE; + ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE; + ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362; + break; case BCM6368_CPU_ID: irq_stat_addr += PERF_IRQSTAT_6368_REG; irq_mask_addr += PERF_IRQMASK_6368_REG; @@ -458,6 +479,7 @@ static int bcm63xx_external_irq_set_type(struct irq_data *d, case BCM6338_CPU_ID: case BCM6345_CPU_ID: case BCM6358_CPU_ID: + case BCM6362_CPU_ID: case BCM6368_CPU_ID: if (levelsense) reg |= EXTIRQ_CFG_LEVELSENSE(irq); diff --git a/arch/mips/bcm63xx/nvram.c b/arch/mips/bcm63xx/nvram.c index 6206116..a4b8864 100644 --- a/arch/mips/bcm63xx/nvram.c +++ b/arch/mips/bcm63xx/nvram.c @@ -38,7 +38,7 @@ struct bcm963xx_nvram { static struct bcm963xx_nvram nvram; static int mac_addr_used; -int __init bcm63xx_nvram_init(void *addr) +void __init bcm63xx_nvram_init(void *addr) { unsigned int check_len; u32 crc, expected_crc; @@ -60,9 +60,8 @@ int __init bcm63xx_nvram_init(void *addr) crc = crc32_le(~0, (u8 *)&nvram, check_len); if (crc != expected_crc) - return -EINVAL; - - return 0; + pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n", + expected_crc, crc); } u8 *bcm63xx_nvram_get_name(void) diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c index 10eaff4..fd69808 100644 --- a/arch/mips/bcm63xx/prom.c +++ b/arch/mips/bcm63xx/prom.c @@ -36,6 +36,8 @@ void __init prom_init(void) mask = CKCTL_6348_ALL_SAFE_EN; else if (BCMCPU_IS_6358()) mask = CKCTL_6358_ALL_SAFE_EN; + else if (BCMCPU_IS_6362()) + mask = CKCTL_6362_ALL_SAFE_EN; else if (BCMCPU_IS_6368()) mask = CKCTL_6368_ALL_SAFE_EN; else diff --git a/arch/mips/bcm63xx/reset.c b/arch/mips/bcm63xx/reset.c index 68a31bb..317931c 100644 --- a/arch/mips/bcm63xx/reset.c +++ b/arch/mips/bcm63xx/reset.c @@ -85,6 +85,20 @@ #define BCM6358_RESET_PCIE 0 #define BCM6358_RESET_PCIE_EXT 0 +#define BCM6362_RESET_SPI SOFTRESET_6362_SPI_MASK +#define BCM6362_RESET_ENET 0 +#define BCM6362_RESET_USBH SOFTRESET_6362_USBH_MASK +#define BCM6362_RESET_USBD SOFTRESET_6362_USBS_MASK +#define BCM6362_RESET_DSL 0 +#define BCM6362_RESET_SAR SOFTRESET_6362_SAR_MASK +#define BCM6362_RESET_EPHY SOFTRESET_6362_EPHY_MASK +#define BCM6362_RESET_ENETSW SOFTRESET_6362_ENETSW_MASK +#define BCM6362_RESET_PCM SOFTRESET_6362_PCM_MASK +#define BCM6362_RESET_MPI 0 +#define BCM6362_RESET_PCIE (SOFTRESET_6362_PCIE_MASK | \ + SOFTRESET_6362_PCIE_CORE_MASK) +#define BCM6362_RESET_PCIE_EXT SOFTRESET_6362_PCIE_EXT_MASK + #define BCM6368_RESET_SPI SOFTRESET_6368_SPI_MASK #define BCM6368_RESET_ENET 0 #define BCM6368_RESET_USBH SOFTRESET_6368_USBH_MASK @@ -119,6 +133,10 @@ static const u32 bcm6358_reset_bits[] = { __GEN_RESET_BITS_TABLE(6358) }; +static const u32 bcm6362_reset_bits[] = { + __GEN_RESET_BITS_TABLE(6362) +}; + static const u32 bcm6368_reset_bits[] = { __GEN_RESET_BITS_TABLE(6368) }; @@ -140,6 +158,9 @@ static int __init bcm63xx_reset_bits_init(void) } else if (BCMCPU_IS_6358()) { reset_reg = PERF_SOFTRESET_6358_REG; bcm63xx_reset_bits = bcm6358_reset_bits; + } else if (BCMCPU_IS_6362()) { + reset_reg = PERF_SOFTRESET_6362_REG; + bcm63xx_reset_bits = bcm6362_reset_bits; } else if (BCMCPU_IS_6368()) { reset_reg = PERF_SOFTRESET_6368_REG; bcm63xx_reset_bits = bcm6368_reset_bits; @@ -182,6 +203,13 @@ static const u32 bcm63xx_reset_bits[] = { #define reset_reg PERF_SOFTRESET_6358_REG #endif +#ifdef CONFIG_BCM63XX_CPU_6362 +static const u32 bcm63xx_reset_bits[] = { + __GEN_RESET_BITS_TABLE(6362) +}; +#define reset_reg PERF_SOFTRESET_6362_REG +#endif + #ifdef CONFIG_BCM63XX_CPU_6368 static const u32 bcm63xx_reset_bits[] = { __GEN_RESET_BITS_TABLE(6368) diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index 314231b..24a2444 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -83,6 +83,9 @@ void bcm63xx_machine_reboot(void) case BCM6358_CPU_ID: perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358; break; + case BCM6362_CPU_ID: + perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362; + break; } for (i = 0; i < 2; i++) { @@ -126,7 +129,7 @@ static void __bcm63xx_machine_reboot(char *p) const char *get_system_type(void) { static char buf[128]; - snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)", + snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%02X)", board_get_name(), bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); return buf; @@ -157,4 +160,4 @@ int __init bcm63xx_register_devices(void) return board_register_devices(); } -device_initcall(bcm63xx_register_devices); +arch_initcall(bcm63xx_register_devices); diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 156aa61..a22f06a 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -1032,9 +1032,8 @@ static int octeon_irq_gpio_map_common(struct irq_domain *d, if (!octeon_irq_virq_in_range(virq)) return -EINVAL; - hw += gpiod->base_hwirq; - line = hw >> 6; - bit = hw & 63; + line = (hw + gpiod->base_hwirq) >> 6; + bit = (hw + gpiod->base_hwirq) & 63; if (line > line_limit || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index c594a3d..b0baa29 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -174,7 +174,10 @@ static int octeon_kexec_prepare(struct kimage *image) static void octeon_generic_shutdown(void) { - int cpu, i; + int i; +#ifdef CONFIG_SMP + int cpu; +#endif struct cvmx_bootmem_desc *bootmem_desc; void *named_block_array_ptr; diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index b71dd5b..4d2cdea 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -104,6 +104,7 @@ struct boot_mem_map { extern struct boot_mem_map boot_mem_map; extern void add_memory_region(phys_t start, phys_t size, long type); +extern void detect_memory_region(phys_t start, phys_t sz_min, phys_t sz_max); extern void prom_init(void); extern void prom_free_prom_memory(void); diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 1a57e8b..e5ec8fc 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -113,6 +113,9 @@ #ifndef cpu_has_pindexed_dcache #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) #endif +#ifndef cpu_has_local_ebase +#define cpu_has_local_ebase 1 +#endif /* * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index 44d6a5b..e3ee92d 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -10,34 +10,13 @@ #ifndef _ASM_HAZARDS_H #define _ASM_HAZARDS_H -#ifdef __ASSEMBLY__ -#define ASMMACRO(name, code...) .macro name; code; .endm -#else - -#include <asm/cpu-features.h> - -#define ASMMACRO(name, code...) \ -__asm__(".macro " #name "; " #code "; .endm"); \ - \ -static inline void name(void) \ -{ \ - __asm__ __volatile__ (#name); \ -} - -/* - * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. - */ -extern void mips_ihb(void); - -#endif +#include <linux/stringify.h> -ASMMACRO(_ssnop, - sll $0, $0, 1 - ) +#define ___ssnop \ + sll $0, $0, 1 -ASMMACRO(_ehb, - sll $0, $0, 3 - ) +#define ___ehb \ + sll $0, $0, 3 /* * TLB hazards @@ -48,24 +27,24 @@ ASMMACRO(_ehb, * MIPSR2 defines ehb for hazard avoidance */ -ASMMACRO(mtc0_tlbw_hazard, - _ehb - ) -ASMMACRO(tlbw_use_hazard, - _ehb - ) -ASMMACRO(tlb_probe_hazard, - _ehb - ) -ASMMACRO(irq_enable_hazard, - _ehb - ) -ASMMACRO(irq_disable_hazard, - _ehb - ) -ASMMACRO(back_to_back_c0_hazard, - _ehb - ) +#define __mtc0_tlbw_hazard \ + ___ehb + +#define __tlbw_use_hazard \ + ___ehb + +#define __tlb_probe_hazard \ + ___ehb + +#define __irq_enable_hazard \ + ___ehb + +#define __irq_disable_hazard \ + ___ehb + +#define __back_to_back_c0_hazard \ + ___ehb + /* * gcc has a tradition of misscompiling the previous construct using the * address of a label as argument to inline assembler. Gas otoh has the @@ -94,24 +73,42 @@ do { \ * These are slightly complicated by the fact that we guarantee R1 kernels to * run fine on R2 processors. */ -ASMMACRO(mtc0_tlbw_hazard, - _ssnop; _ssnop; _ehb - ) -ASMMACRO(tlbw_use_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -ASMMACRO(tlb_probe_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -ASMMACRO(irq_enable_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -ASMMACRO(irq_disable_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -ASMMACRO(back_to_back_c0_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) + +#define __mtc0_tlbw_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ehb + +#define __tlbw_use_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ssnop; \ + ___ehb + +#define __tlb_probe_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ssnop; \ + ___ehb + +#define __irq_enable_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ssnop; \ + ___ehb + +#define __irq_disable_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ssnop; \ + ___ehb + +#define __back_to_back_c0_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ssnop; \ + ___ehb + /* * gcc has a tradition of misscompiling the previous construct using the * address of a label as argument to inline assembler. Gas otoh has the @@ -147,18 +144,18 @@ do { \ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. */ -ASMMACRO(mtc0_tlbw_hazard, - ) -ASMMACRO(tlbw_use_hazard, - ) -ASMMACRO(tlb_probe_hazard, - ) -ASMMACRO(irq_enable_hazard, - ) -ASMMACRO(irq_disable_hazard, - ) -ASMMACRO(back_to_back_c0_hazard, - ) +#define __mtc0_tlbw_hazard + +#define __tlbw_use_hazard + +#define __tlb_probe_hazard + +#define __irq_enable_hazard + +#define __irq_disable_hazard + +#define __back_to_back_c0_hazard + #define instruction_hazard() do { } while (0) #elif defined(CONFIG_CPU_SB1) @@ -166,19 +163,21 @@ ASMMACRO(back_to_back_c0_hazard, /* * Mostly like R4000 for historic reasons */ -ASMMACRO(mtc0_tlbw_hazard, - ) -ASMMACRO(tlbw_use_hazard, - ) -ASMMACRO(tlb_probe_hazard, - ) -ASMMACRO(irq_enable_hazard, - ) -ASMMACRO(irq_disable_hazard, - _ssnop; _ssnop; _ssnop - ) -ASMMACRO(back_to_back_c0_hazard, - ) +#define __mtc0_tlbw_hazard + +#define __tlbw_use_hazard + +#define __tlb_probe_hazard + +#define __irq_enable_hazard + +#define __irq_disable_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ssnop + +#define __back_to_back_c0_hazard + #define instruction_hazard() do { } while (0) #else @@ -192,24 +191,35 @@ ASMMACRO(back_to_back_c0_hazard, * hazard so this is nice trick to have an optimal code for a range of * processors. */ -ASMMACRO(mtc0_tlbw_hazard, - nop; nop - ) -ASMMACRO(tlbw_use_hazard, - nop; nop; nop - ) -ASMMACRO(tlb_probe_hazard, - nop; nop; nop - ) -ASMMACRO(irq_enable_hazard, - _ssnop; _ssnop; _ssnop; - ) -ASMMACRO(irq_disable_hazard, - nop; nop; nop - ) -ASMMACRO(back_to_back_c0_hazard, - _ssnop; _ssnop; _ssnop; - ) +#define __mtc0_tlbw_hazard \ + nop; \ + nop + +#define __tlbw_use_hazard \ + nop; \ + nop; \ + nop + +#define __tlb_probe_hazard \ + nop; \ + nop; \ + nop + +#define __irq_enable_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ssnop + +#define __irq_disable_hazard \ + nop; \ + nop; \ + nop + +#define __back_to_back_c0_hazard \ + ___ssnop; \ + ___ssnop; \ + ___ssnop + #define instruction_hazard() do { } while (0) #endif @@ -218,32 +228,137 @@ ASMMACRO(back_to_back_c0_hazard, /* FPU hazards */ #if defined(CONFIG_CPU_SB1) -ASMMACRO(enable_fpu_hazard, - .set push; - .set mips64; - .set noreorder; - _ssnop; - bnezl $0, .+4; - _ssnop; - .set pop -) -ASMMACRO(disable_fpu_hazard, -) + +#define __enable_fpu_hazard \ + .set push; \ + .set mips64; \ + .set noreorder; \ + ___ssnop; \ + bnezl $0, .+4; \ + ___ssnop; \ + .set pop + +#define __disable_fpu_hazard #elif defined(CONFIG_CPU_MIPSR2) -ASMMACRO(enable_fpu_hazard, - _ehb -) -ASMMACRO(disable_fpu_hazard, - _ehb -) + +#define __enable_fpu_hazard \ + ___ehb + +#define __disable_fpu_hazard \ + ___ehb + #else -ASMMACRO(enable_fpu_hazard, - nop; nop; nop; nop -) -ASMMACRO(disable_fpu_hazard, - _ehb -) + +#define __enable_fpu_hazard \ + nop; \ + nop; \ + nop; \ + nop + +#define __disable_fpu_hazard \ + ___ehb + #endif +#ifdef __ASSEMBLY__ + +#define _ssnop ___ssnop +#define _ehb ___ehb +#define mtc0_tlbw_hazard __mtc0_tlbw_hazard +#define tlbw_use_hazard __tlbw_use_hazard +#define tlb_probe_hazard __tlb_probe_hazard +#define irq_enable_hazard __irq_enable_hazard +#define irq_disable_hazard __irq_disable_hazard +#define back_to_back_c0_hazard __back_to_back_c0_hazard +#define enable_fpu_hazard __enable_fpu_hazard +#define disable_fpu_hazard __disable_fpu_hazard + +#else + +#define _ssnop() \ +do { \ + __asm__ __volatile__( \ + __stringify(___ssnop) \ + ); \ +} while (0) + +#define _ehb() \ +do { \ + __asm__ __volatile__( \ + __stringify(___ehb) \ + ); \ +} while (0) + + +#define mtc0_tlbw_hazard() \ +do { \ + __asm__ __volatile__( \ + __stringify(__mtc0_tlbw_hazard) \ + ); \ +} while (0) + + +#define tlbw_use_hazard() \ +do { \ + __asm__ __volatile__( \ + __stringify(__tlbw_use_hazard) \ + ); \ +} while (0) + + +#define tlb_probe_hazard() \ +do { \ + __asm__ __volatile__( \ + __stringify(__tlb_probe_hazard) \ + ); \ +} while (0) + + +#define irq_enable_hazard() \ +do { \ + __asm__ __volatile__( \ + __stringify(__irq_enable_hazard) \ + ); \ +} while (0) + + +#define irq_disable_hazard() \ +do { \ + __asm__ __volatile__( \ + __stringify(__irq_disable_hazard) \ + ); \ +} while (0) + + +#define back_to_back_c0_hazard() \ +do { \ + __asm__ __volatile__( \ + __stringify(__back_to_back_c0_hazard) \ + ); \ +} while (0) + + +#define enable_fpu_hazard() \ +do { \ + __asm__ __volatile__( \ + __stringify(__enable_fpu_hazard) \ + ); \ +} while (0) + + +#define disable_fpu_hazard() \ +do { \ + __asm__ __volatile__( \ + __stringify(__disable_fpu_hazard) \ + ); \ +} while (0) + +/* + * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. + */ +extern void mips_ihb(void); + +#endif /* __ASSEMBLY__ */ + #endif /* _ASM_HAZARDS_H */ diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h index 9f3384c..45c0095 100644 --- a/arch/mips/include/asm/irqflags.h +++ b/arch/mips/include/asm/irqflags.h @@ -14,53 +14,48 @@ #ifndef __ASSEMBLY__ #include <linux/compiler.h> +#include <linux/stringify.h> #include <asm/hazards.h> #if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) -__asm__( - " .macro arch_local_irq_disable\n" +static inline void arch_local_irq_disable(void) +{ + __asm__ __volatile__( " .set push \n" " .set noat \n" " di \n" - " irq_disable_hazard \n" + " " __stringify(__irq_disable_hazard) " \n" " .set pop \n" - " .endm \n"); - -static inline void arch_local_irq_disable(void) -{ - __asm__ __volatile__( - "arch_local_irq_disable" - : /* no outputs */ - : /* no inputs */ - : "memory"); + : /* no outputs */ + : /* no inputs */ + : "memory"); } +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags; -__asm__( - " .macro arch_local_irq_save result \n" + asm __volatile__( " .set push \n" " .set reorder \n" " .set noat \n" - " di \\result \n" - " andi \\result, 1 \n" - " irq_disable_hazard \n" + " di %[flags] \n" + " andi %[flags], 1 \n" + " " __stringify(__irq_disable_hazard) " \n" " .set pop \n" - " .endm \n"); + : [flags] "=r" (flags) + : /* no inputs */ + : "memory"); -static inline unsigned long arch_local_irq_save(void) -{ - unsigned long flags; - asm volatile("arch_local_irq_save\t%0" - : "=r" (flags) - : /* no inputs */ - : "memory"); return flags; } +static inline void arch_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; -__asm__( - " .macro arch_local_irq_restore flags \n" + __asm__ __volatile__( " .set push \n" " .set noreorder \n" " .set noat \n" @@ -69,7 +64,7 @@ __asm__( * Slow, but doesn't suffer from a relatively unlikely race * condition we're having since days 1. */ - " beqz \\flags, 1f \n" + " beqz %[flags], 1f \n" " di \n" " ei \n" "1: \n" @@ -78,33 +73,44 @@ __asm__( * Fast, dangerous. Life is fun, life is good. */ " mfc0 $1, $12 \n" - " ins $1, \\flags, 0, 1 \n" + " ins $1, %[flags], 0, 1 \n" " mtc0 $1, $12 \n" #endif - " irq_disable_hazard \n" + " " __stringify(__irq_disable_hazard) " \n" " .set pop \n" - " .endm \n"); - -static inline void arch_local_irq_restore(unsigned long flags) -{ - unsigned long __tmp1; - - __asm__ __volatile__( - "arch_local_irq_restore\t%0" - : "=r" (__tmp1) - : "0" (flags) - : "memory"); + : [flags] "=r" (__tmp1) + : "0" (flags) + : "memory"); } static inline void __arch_local_irq_restore(unsigned long flags) { - unsigned long __tmp1; - __asm__ __volatile__( - "arch_local_irq_restore\t%0" - : "=r" (__tmp1) - : "0" (flags) - : "memory"); + " .set push \n" + " .set noreorder \n" + " .set noat \n" +#if defined(CONFIG_IRQ_CPU) + /* + * Slow, but doesn't suffer from a relatively unlikely race + * condition we're having since days 1. + */ + " beqz %[flags], 1f \n" + " di \n" + " ei \n" + "1: \n" +#else + /* + * Fast, dangerous. Life is fun, life is good. + */ + " mfc0 $1, $12 \n" + " ins $1, %[flags], 0, 1 \n" + " mtc0 $1, $12 \n" +#endif + " " __stringify(__irq_disable_hazard) " \n" + " .set pop \n" + : [flags] "=r" (flags) + : "0" (flags) + : "memory"); } #else /* Functions that require preempt_{dis,en}able() are in mips-atomic.c */ @@ -115,8 +121,18 @@ void __arch_local_irq_restore(unsigned long flags); #endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */ -__asm__( - " .macro arch_local_irq_enable \n" +extern void smtc_ipi_replay(void); + +static inline void arch_local_irq_enable(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of call overhead on each local_irq_enable() + */ + smtc_ipi_replay(); +#endif + __asm__ __volatile__( " .set push \n" " .set reorder \n" " .set noat \n" @@ -133,45 +149,28 @@ __asm__( " xori $1,0x1e \n" " mtc0 $1,$12 \n" #endif - " irq_enable_hazard \n" + " " __stringify(__irq_enable_hazard) " \n" " .set pop \n" - " .endm"); - -extern void smtc_ipi_replay(void); - -static inline void arch_local_irq_enable(void) -{ -#ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC kernel needs to do a software replay of queued - * IPIs, at the cost of call overhead on each local_irq_enable() - */ - smtc_ipi_replay(); -#endif - __asm__ __volatile__( - "arch_local_irq_enable" - : /* no outputs */ - : /* no inputs */ - : "memory"); + : /* no outputs */ + : /* no inputs */ + : "memory"); } +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; -__asm__( - " .macro arch_local_save_flags flags \n" + asm __volatile__( " .set push \n" " .set reorder \n" #ifdef CONFIG_MIPS_MT_SMTC - " mfc0 \\flags, $2, 1 \n" + " mfc0 %[flags], $2, 1 \n" #else - " mfc0 \\flags, $12 \n" + " mfc0 %[flags], $12 \n" #endif " .set pop \n" - " .endm \n"); + : [flags] "=r" (flags)); -static inline unsigned long arch_local_save_flags(void) -{ - unsigned long flags; - asm volatile("arch_local_save_flags %0" : "=r" (flags)); return flags; } diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h deleted file mode 100644 index 8fcf8df..0000000 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef BCM63XX_CLK_H_ -#define BCM63XX_CLK_H_ - -struct clk { - void (*set)(struct clk *, int); - unsigned int rate; - unsigned int usage; - int id; -}; - -#endif /* ! BCM63XX_CLK_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h index cb922b9..3362289 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h @@ -14,11 +14,12 @@ #define BCM6345_CPU_ID 0x6345 #define BCM6348_CPU_ID 0x6348 #define BCM6358_CPU_ID 0x6358 +#define BCM6362_CPU_ID 0x6362 #define BCM6368_CPU_ID 0x6368 void __init bcm63xx_cpu_init(void); u16 __bcm63xx_get_cpu_id(void); -u16 bcm63xx_get_cpu_rev(void); +u8 bcm63xx_get_cpu_rev(void); unsigned int bcm63xx_get_cpu_freq(void); #ifdef CONFIG_BCM63XX_CPU_6328 @@ -86,6 +87,20 @@ unsigned int bcm63xx_get_cpu_freq(void); # define BCMCPU_IS_6358() (0) #endif +#ifdef CONFIG_BCM63XX_CPU_6362 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6362_CPU_ID +# endif +# define BCMCPU_IS_6362() (bcm63xx_get_cpu_id() == BCM6362_CPU_ID) +#else +# define BCMCPU_IS_6362() (0) +#endif + + #ifdef CONFIG_BCM63XX_CPU_6368 # ifdef bcm63xx_get_cpu_id # undef bcm63xx_get_cpu_id @@ -406,6 +421,62 @@ enum bcm63xx_regs_set { /* + * 6362 register sets base address + */ +#define BCM_6362_DSL_LMEM_BASE (0xdeadbeef) +#define BCM_6362_PERF_BASE (0xb0000000) +#define BCM_6362_TIMER_BASE (0xb0000040) +#define BCM_6362_WDT_BASE (0xb000005c) +#define BCM_6362_UART0_BASE (0xb0000100) +#define BCM_6362_UART1_BASE (0xb0000120) +#define BCM_6362_GPIO_BASE (0xb0000080) +#define BCM_6362_SPI_BASE (0xb0000800) +#define BCM_6362_HSSPI_BASE (0xb0001000) +#define BCM_6362_UDC0_BASE (0xdeadbeef) +#define BCM_6362_USBDMA_BASE (0xb000c000) +#define BCM_6362_OHCI0_BASE (0xb0002600) +#define BCM_6362_OHCI_PRIV_BASE (0xdeadbeef) +#define BCM_6362_USBH_PRIV_BASE (0xb0002700) +#define BCM_6362_USBD_BASE (0xb0002400) +#define BCM_6362_MPI_BASE (0xdeadbeef) +#define BCM_6362_PCMCIA_BASE (0xdeadbeef) +#define BCM_6362_PCIE_BASE (0xb0e40000) +#define BCM_6362_SDRAM_REGS_BASE (0xdeadbeef) +#define BCM_6362_DSL_BASE (0xdeadbeef) +#define BCM_6362_UBUS_BASE (0xdeadbeef) +#define BCM_6362_ENET0_BASE (0xdeadbeef) +#define BCM_6362_ENET1_BASE (0xdeadbeef) +#define BCM_6362_ENETDMA_BASE (0xb000d800) +#define BCM_6362_ENETDMAC_BASE (0xb000da00) +#define BCM_6362_ENETDMAS_BASE (0xb000dc00) +#define BCM_6362_ENETSW_BASE (0xb0e00000) +#define BCM_6362_EHCI0_BASE (0xb0002500) +#define BCM_6362_SDRAM_BASE (0xdeadbeef) +#define BCM_6362_MEMC_BASE (0xdeadbeef) +#define BCM_6362_DDR_BASE (0xb0003000) +#define BCM_6362_M2M_BASE (0xdeadbeef) +#define BCM_6362_ATM_BASE (0xdeadbeef) +#define BCM_6362_XTM_BASE (0xb0007800) +#define BCM_6362_XTMDMA_BASE (0xb000b800) +#define BCM_6362_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6362_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6362_PCM_BASE (0xb000a800) +#define BCM_6362_PCMDMA_BASE (0xdeadbeef) +#define BCM_6362_PCMDMAC_BASE (0xdeadbeef) +#define BCM_6362_PCMDMAS_BASE (0xdeadbeef) +#define BCM_6362_RNG_BASE (0xdeadbeef) +#define BCM_6362_MISC_BASE (0xb0001800) + +#define BCM_6362_NAND_REG_BASE (0xb0000200) +#define BCM_6362_NAND_CACHE_BASE (0xb0000600) +#define BCM_6362_LED_BASE (0xb0001900) +#define BCM_6362_IPSEC_BASE (0xb0002800) +#define BCM_6362_IPSEC_DMA_BASE (0xb000d000) +#define BCM_6362_WLAN_CHIPCOMMON_BASE (0xb0004000) +#define BCM_6362_WLAN_D11_BASE (0xb0005000) +#define BCM_6362_WLAN_SHIM_BASE (0xb0007000) + +/* * 6368 register sets base address */ #define BCM_6368_DSL_LMEM_BASE (0xdeadbeef) @@ -564,6 +635,9 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) #ifdef CONFIG_BCM63XX_CPU_6358 __GEN_RSET(6358) #endif +#ifdef CONFIG_BCM63XX_CPU_6362 + __GEN_RSET(6362) +#endif #ifdef CONFIG_BCM63XX_CPU_6368 __GEN_RSET(6368) #endif @@ -820,6 +894,71 @@ enum bcm63xx_irq { #define BCM_6358_EXT_IRQ3 (IRQ_INTERNAL_BASE + 28) /* + * 6362 irqs + */ +#define BCM_6362_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32) + +#define BCM_6362_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6362_SPI_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6362_UART0_IRQ (IRQ_INTERNAL_BASE + 3) +#define BCM_6362_UART1_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6362_DSL_IRQ (IRQ_INTERNAL_BASE + 28) +#define BCM_6362_UDC0_IRQ 0 +#define BCM_6362_ENET0_IRQ 0 +#define BCM_6362_ENET1_IRQ 0 +#define BCM_6362_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 14) +#define BCM_6362_HSSPI_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6362_OHCI0_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6362_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10) +#define BCM_6362_USBD_IRQ (IRQ_INTERNAL_BASE + 11) +#define BCM_6362_USBD_RXDMA0_IRQ (IRQ_INTERNAL_BASE + 20) +#define BCM_6362_USBD_TXDMA0_IRQ (IRQ_INTERNAL_BASE + 21) +#define BCM_6362_USBD_RXDMA1_IRQ (IRQ_INTERNAL_BASE + 22) +#define BCM_6362_USBD_TXDMA1_IRQ (IRQ_INTERNAL_BASE + 23) +#define BCM_6362_USBD_RXDMA2_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6362_USBD_TXDMA2_IRQ (IRQ_INTERNAL_BASE + 25) +#define BCM_6362_PCMCIA_IRQ 0 +#define BCM_6362_ENET0_RXDMA_IRQ 0 +#define BCM_6362_ENET0_TXDMA_IRQ 0 +#define BCM_6362_ENET1_RXDMA_IRQ 0 +#define BCM_6362_ENET1_TXDMA_IRQ 0 +#define BCM_6362_PCI_IRQ (IRQ_INTERNAL_BASE + 30) +#define BCM_6362_ATM_IRQ 0 +#define BCM_6362_ENETSW_RXDMA0_IRQ (BCM_6362_HIGH_IRQ_BASE + 0) +#define BCM_6362_ENETSW_RXDMA1_IRQ (BCM_6362_HIGH_IRQ_BASE + 1) +#define BCM_6362_ENETSW_RXDMA2_IRQ (BCM_6362_HIGH_IRQ_BASE + 2) +#define BCM_6362_ENETSW_RXDMA3_IRQ (BCM_6362_HIGH_IRQ_BASE + 3) +#define BCM_6362_ENETSW_TXDMA0_IRQ 0 +#define BCM_6362_ENETSW_TXDMA1_IRQ 0 +#define BCM_6362_ENETSW_TXDMA2_IRQ 0 +#define BCM_6362_ENETSW_TXDMA3_IRQ 0 +#define BCM_6362_XTM_IRQ 0 +#define BCM_6362_XTM_DMA0_IRQ (BCM_6362_HIGH_IRQ_BASE + 12) + +#define BCM_6362_RING_OSC_IRQ (IRQ_INTERNAL_BASE + 1) +#define BCM_6362_WLAN_GPIO_IRQ (IRQ_INTERNAL_BASE + 6) +#define BCM_6362_WLAN_IRQ (IRQ_INTERNAL_BASE + 7) +#define BCM_6362_IPSEC_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6362_NAND_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6362_PCM_IRQ (IRQ_INTERNAL_BASE + 13) +#define BCM_6362_DG_IRQ (IRQ_INTERNAL_BASE + 15) +#define BCM_6362_EPHY_ENERGY0_IRQ (IRQ_INTERNAL_BASE + 16) +#define BCM_6362_EPHY_ENERGY1_IRQ (IRQ_INTERNAL_BASE + 17) +#define BCM_6362_EPHY_ENERGY2_IRQ (IRQ_INTERNAL_BASE + 18) +#define BCM_6362_EPHY_ENERGY3_IRQ (IRQ_INTERNAL_BASE + 19) +#define BCM_6362_IPSEC_DMA0_IRQ (IRQ_INTERNAL_BASE + 26) +#define BCM_6362_IPSEC_DMA1_IRQ (IRQ_INTERNAL_BASE + 27) +#define BCM_6362_FAP0_IRQ (IRQ_INTERNAL_BASE + 29) +#define BCM_6362_PCM_DMA0_IRQ (BCM_6362_HIGH_IRQ_BASE + 4) +#define BCM_6362_PCM_DMA1_IRQ (BCM_6362_HIGH_IRQ_BASE + 5) +#define BCM_6362_DECT0_IRQ (BCM_6362_HIGH_IRQ_BASE + 6) +#define BCM_6362_DECT1_IRQ (BCM_6362_HIGH_IRQ_BASE + 7) +#define BCM_6362_EXT_IRQ0 (BCM_6362_HIGH_IRQ_BASE + 8) +#define BCM_6362_EXT_IRQ1 (BCM_6362_HIGH_IRQ_BASE + 9) +#define BCM_6362_EXT_IRQ2 (BCM_6362_HIGH_IRQ_BASE + 10) +#define BCM_6362_EXT_IRQ3 (BCM_6362_HIGH_IRQ_BASE + 11) + +/* * 6368 irqs */ #define BCM_6368_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32) diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h index c9bae13..6515da9 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h @@ -72,18 +72,13 @@ static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg) return bcm63xx_regs_spi[reg]; #else -#ifdef CONFIG_BCM63XX_CPU_6338 - __GEN_SPI_RSET(6338) -#endif -#ifdef CONFIG_BCM63XX_CPU_6348 +#if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348) __GEN_SPI_RSET(6348) #endif -#ifdef CONFIG_BCM63XX_CPU_6358 +#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) || \ + defined(CONFIG_BCM63XX_CPU_6368) __GEN_SPI_RSET(6358) #endif -#ifdef CONFIG_BCM63XX_CPU_6368 - __GEN_SPI_RSET(6368) -#endif #endif return 0; } diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h index 0a9891f..35baa1a 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h @@ -17,6 +17,8 @@ static inline unsigned long bcm63xx_gpio_count(void) return 8; case BCM6345_CPU_ID: return 16; + case BCM6362_CPU_ID: + return 48; case BCM6368_CPU_ID: return 38; case BCM6348_CPU_ID: diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h index 62d6a3b..4e0b6bc 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h @@ -9,10 +9,8 @@ * * Initialized the local nvram copy from the target address and checks * its checksum. - * - * Returns 0 on success. */ -int __init bcm63xx_nvram_init(void *nvram); +void bcm63xx_nvram_init(void *nvram); /** * bcm63xx_nvram_get_name() - returns the board name according to nvram diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 81b4702..3203fe4 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -10,7 +10,7 @@ #define REV_CHIPID_SHIFT 16 #define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT) #define REV_REVID_SHIFT 0 -#define REV_REVID_MASK (0xffff << REV_REVID_SHIFT) +#define REV_REVID_MASK (0xff << REV_REVID_SHIFT) /* Clock Control register */ #define PERF_CKCTL_REG 0x4 @@ -112,6 +112,39 @@ CKCTL_6358_USBSU_EN | \ CKCTL_6358_EPHY_EN) +#define CKCTL_6362_ADSL_QPROC_EN (1 << 1) +#define CKCTL_6362_ADSL_AFE_EN (1 << 2) +#define CKCTL_6362_ADSL_EN (1 << 3) +#define CKCTL_6362_MIPS_EN (1 << 4) +#define CKCTL_6362_WLAN_OCP_EN (1 << 5) +#define CKCTL_6362_SWPKT_USB_EN (1 << 7) +#define CKCTL_6362_SWPKT_SAR_EN (1 << 8) +#define CKCTL_6362_SAR_EN (1 << 9) +#define CKCTL_6362_ROBOSW_EN (1 << 10) +#define CKCTL_6362_PCM_EN (1 << 11) +#define CKCTL_6362_USBD_EN (1 << 12) +#define CKCTL_6362_USBH_EN (1 << 13) +#define CKCTL_6362_IPSEC_EN (1 << 14) +#define CKCTL_6362_SPI_EN (1 << 15) +#define CKCTL_6362_HSSPI_EN (1 << 16) +#define CKCTL_6362_PCIE_EN (1 << 17) +#define CKCTL_6362_FAP_EN (1 << 18) +#define CKCTL_6362_PHYMIPS_EN (1 << 19) +#define CKCTL_6362_NAND_EN (1 << 20) + +#define CKCTL_6362_ALL_SAFE_EN (CKCTL_6362_PHYMIPS_EN | \ + CKCTL_6362_ADSL_QPROC_EN | \ + CKCTL_6362_ADSL_AFE_EN | \ + CKCTL_6362_ADSL_EN | \ + CKCTL_6362_SAR_EN | \ + CKCTL_6362_PCM_EN | \ + CKCTL_6362_IPSEC_EN | \ + CKCTL_6362_USBD_EN | \ + CKCTL_6362_USBH_EN | \ + CKCTL_6362_ROBOSW_EN | \ + CKCTL_6362_PCIE_EN) + + #define CKCTL_6368_VDSL_QPROC_EN (1 << 2) #define CKCTL_6368_VDSL_AFE_EN (1 << 3) #define CKCTL_6368_VDSL_BONDING_EN (1 << 4) @@ -153,6 +186,7 @@ #define PERF_IRQMASK_6345_REG 0xc #define PERF_IRQMASK_6348_REG 0xc #define PERF_IRQMASK_6358_REG 0xc +#define PERF_IRQMASK_6362_REG 0x20 #define PERF_IRQMASK_6368_REG 0x20 /* Interrupt Status register */ @@ -161,6 +195,7 @@ #define PERF_IRQSTAT_6345_REG 0x10 #define PERF_IRQSTAT_6348_REG 0x10 #define PERF_IRQSTAT_6358_REG 0x10 +#define PERF_IRQSTAT_6362_REG 0x28 #define PERF_IRQSTAT_6368_REG 0x28 /* External Interrupt Configuration register */ @@ -169,6 +204,7 @@ #define PERF_EXTIRQ_CFG_REG_6345 0x14 #define PERF_EXTIRQ_CFG_REG_6348 0x14 #define PERF_EXTIRQ_CFG_REG_6358 0x14 +#define PERF_EXTIRQ_CFG_REG_6362 0x18 #define PERF_EXTIRQ_CFG_REG_6368 0x18 #define PERF_EXTIRQ_CFG_REG2_6368 0x1c @@ -197,6 +233,7 @@ #define PERF_SOFTRESET_REG 0x28 #define PERF_SOFTRESET_6328_REG 0x10 #define PERF_SOFTRESET_6358_REG 0x34 +#define PERF_SOFTRESET_6362_REG 0x10 #define PERF_SOFTRESET_6368_REG 0x10 #define SOFTRESET_6328_SPI_MASK (1 << 0) @@ -259,6 +296,22 @@ #define SOFTRESET_6358_PCM_MASK (1 << 13) #define SOFTRESET_6358_ADSL_MASK (1 << 14) +#define SOFTRESET_6362_SPI_MASK (1 << 0) +#define SOFTRESET_6362_IPSEC_MASK (1 << 1) +#define SOFTRESET_6362_EPHY_MASK (1 << 2) +#define SOFTRESET_6362_SAR_MASK (1 << 3) +#define SOFTRESET_6362_ENETSW_MASK (1 << 4) +#define SOFTRESET_6362_USBS_MASK (1 << 5) +#define SOFTRESET_6362_USBH_MASK (1 << 6) +#define SOFTRESET_6362_PCM_MASK (1 << 7) +#define SOFTRESET_6362_PCIE_CORE_MASK (1 << 8) +#define SOFTRESET_6362_PCIE_MASK (1 << 9) +#define SOFTRESET_6362_PCIE_EXT_MASK (1 << 10) +#define SOFTRESET_6362_WLAN_SHIM_MASK (1 << 11) +#define SOFTRESET_6362_DDR_PHY_MASK (1 << 12) +#define SOFTRESET_6362_FAP_MASK (1 << 13) +#define SOFTRESET_6362_WLAN_UBUS_MASK (1 << 14) + #define SOFTRESET_6368_SPI_MASK (1 << 0) #define SOFTRESET_6368_MPI_MASK (1 << 3) #define SOFTRESET_6368_EPHY_MASK (1 << 6) @@ -1223,24 +1276,7 @@ * _REG relative to RSET_SPI *************************************************************************/ -/* BCM 6338 SPI core */ -#define SPI_6338_CMD 0x00 /* 16-bits register */ -#define SPI_6338_INT_STATUS 0x02 -#define SPI_6338_INT_MASK_ST 0x03 -#define SPI_6338_INT_MASK 0x04 -#define SPI_6338_ST 0x05 -#define SPI_6338_CLK_CFG 0x06 -#define SPI_6338_FILL_BYTE 0x07 -#define SPI_6338_MSG_TAIL 0x09 -#define SPI_6338_RX_TAIL 0x0b -#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */ -#define SPI_6338_MSG_CTL_WIDTH 8 -#define SPI_6338_MSG_DATA 0x41 -#define SPI_6338_MSG_DATA_SIZE 0x3f -#define SPI_6338_RX_DATA 0x80 -#define SPI_6338_RX_DATA_SIZE 0x3f - -/* BCM 6348 SPI core */ +/* BCM 6338/6348 SPI core */ #define SPI_6348_CMD 0x00 /* 16-bits register */ #define SPI_6348_INT_STATUS 0x02 #define SPI_6348_INT_MASK_ST 0x03 @@ -1257,7 +1293,7 @@ #define SPI_6348_RX_DATA 0x80 #define SPI_6348_RX_DATA_SIZE 0x3f -/* BCM 6358 SPI core */ +/* BCM 6358/6262/6368 SPI core */ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */ #define SPI_6358_MSG_CTL_WIDTH 16 #define SPI_6358_MSG_DATA 0x02 @@ -1274,23 +1310,6 @@ #define SPI_6358_MSG_TAIL 0x709 #define SPI_6358_RX_TAIL 0x70B -/* BCM 6358 SPI core */ -#define SPI_6368_MSG_CTL 0x00 /* 16-bits register */ -#define SPI_6368_MSG_CTL_WIDTH 16 -#define SPI_6368_MSG_DATA 0x02 -#define SPI_6368_MSG_DATA_SIZE 0x21e -#define SPI_6368_RX_DATA 0x400 -#define SPI_6368_RX_DATA_SIZE 0x220 -#define SPI_6368_CMD 0x700 /* 16-bits register */ -#define SPI_6368_INT_STATUS 0x702 -#define SPI_6368_INT_MASK_ST 0x703 -#define SPI_6368_INT_MASK 0x704 -#define SPI_6368_ST 0x705 -#define SPI_6368_CLK_CFG 0x706 -#define SPI_6368_FILL_BYTE 0x707 -#define SPI_6368_MSG_TAIL 0x709 -#define SPI_6368_RX_TAIL 0x70B - /* Shared SPI definitions */ /* Message configuration */ @@ -1298,10 +1317,8 @@ #define SPI_HD_W 0x01 #define SPI_HD_R 0x02 #define SPI_BYTE_CNT_SHIFT 0 -#define SPI_6338_MSG_TYPE_SHIFT 6 #define SPI_6348_MSG_TYPE_SHIFT 6 #define SPI_6358_MSG_TYPE_SHIFT 14 -#define SPI_6368_MSG_TYPE_SHIFT 14 /* Command */ #define SPI_CMD_NOOP 0x00 @@ -1348,10 +1365,18 @@ /************************************************************************* * _REG relative to RSET_MISC *************************************************************************/ -#define MISC_SERDES_CTRL_REG 0x0 +#define MISC_SERDES_CTRL_6328_REG 0x0 +#define MISC_SERDES_CTRL_6362_REG 0x4 #define SERDES_PCIE_EN (1 << 0) #define SERDES_PCIE_EXD_EN (1 << 15) +#define MISC_STRAPBUS_6362_REG 0x14 +#define STRAPBUS_6362_FCVO_SHIFT 1 +#define STRAPBUS_6362_HSSPI_CLK_FAST (1 << 13) +#define STRAPBUS_6362_FCVO_MASK (0x1f << STRAPBUS_6362_FCVO_SHIFT) +#define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15) +#define STRAPBUS_6362_BOOT_SEL_NAND (0 << 15) + #define MISC_STRAPBUS_6328_REG 0x240 #define STRAPBUS_6328_FCVO_SHIFT 7 #define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT) diff --git a/arch/mips/include/asm/mach-bcm63xx/ioremap.h b/arch/mips/include/asm/mach-bcm63xx/ioremap.h index 30931c4..94e3011 100644 --- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h +++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h @@ -19,6 +19,7 @@ static inline int is_bcm63xx_internal_registers(phys_t offset) return 1; break; case BCM6328_CPU_ID: + case BCM6362_CPU_ID: case BCM6368_CPU_ID: if (offset >= 0xb0000000 && offset < 0xb1000000) return 1; diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h index 75fd8c0..c0f3ef4 100644 --- a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h @@ -57,5 +57,6 @@ #define cpu_has_vint 0 #define cpu_has_vtag_icache 0 #define cpu_has_watch 1 +#define cpu_has_local_ebase 0 #endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h new file mode 100644 index 0000000..9809972 --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#ifndef _MT7620_REGS_H_ +#define _MT7620_REGS_H_ + +#define MT7620_SYSC_BASE 0x10000000 + +#define SYSC_REG_CHIP_NAME0 0x00 +#define SYSC_REG_CHIP_NAME1 0x04 +#define SYSC_REG_CHIP_REV 0x0c +#define SYSC_REG_SYSTEM_CONFIG0 0x10 +#define SYSC_REG_SYSTEM_CONFIG1 0x14 +#define SYSC_REG_CPLL_CONFIG0 0x54 +#define SYSC_REG_CPLL_CONFIG1 0x58 + +#define MT7620N_CHIP_NAME0 0x33365452 +#define MT7620N_CHIP_NAME1 0x20203235 + +#define MT7620A_CHIP_NAME0 0x3637544d +#define MT7620A_CHIP_NAME1 0x20203032 + +#define CHIP_REV_PKG_MASK 0x1 +#define CHIP_REV_PKG_SHIFT 16 +#define CHIP_REV_VER_MASK 0xf +#define CHIP_REV_VER_SHIFT 8 +#define CHIP_REV_ECO_MASK 0xf + +#define CPLL_SW_CONFIG_SHIFT 31 +#define CPLL_SW_CONFIG_MASK 0x1 +#define CPLL_CPU_CLK_SHIFT 24 +#define CPLL_CPU_CLK_MASK 0x1 +#define CPLL_MULT_RATIO_SHIFT 16 +#define CPLL_MULT_RATIO 0x7 +#define CPLL_DIV_RATIO_SHIFT 10 +#define CPLL_DIV_RATIO 0x3 + +#define SYSCFG0_DRAM_TYPE_MASK 0x3 +#define SYSCFG0_DRAM_TYPE_SHIFT 4 +#define SYSCFG0_DRAM_TYPE_SDRAM 0 +#define SYSCFG0_DRAM_TYPE_DDR1 1 +#define SYSCFG0_DRAM_TYPE_DDR2 2 + +#define MT7620_DRAM_BASE 0x0 +#define MT7620_SDRAM_SIZE_MIN 2 +#define MT7620_SDRAM_SIZE_MAX 64 +#define MT7620_DDR1_SIZE_MIN 32 +#define MT7620_DDR1_SIZE_MAX 128 +#define MT7620_DDR2_SIZE_MIN 32 +#define MT7620_DDR2_SIZE_MAX 256 + +#define MT7620_GPIO_MODE_I2C BIT(0) +#define MT7620_GPIO_MODE_UART0_SHIFT 2 +#define MT7620_GPIO_MODE_UART0_MASK 0x7 +#define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT) +#define MT7620_GPIO_MODE_UARTF 0x0 +#define MT7620_GPIO_MODE_PCM_UARTF 0x1 +#define MT7620_GPIO_MODE_PCM_I2S 0x2 +#define MT7620_GPIO_MODE_I2S_UARTF 0x3 +#define MT7620_GPIO_MODE_PCM_GPIO 0x4 +#define MT7620_GPIO_MODE_GPIO_UARTF 0x5 +#define MT7620_GPIO_MODE_GPIO_I2S 0x6 +#define MT7620_GPIO_MODE_GPIO 0x7 +#define MT7620_GPIO_MODE_UART1 BIT(5) +#define MT7620_GPIO_MODE_MDIO BIT(8) +#define MT7620_GPIO_MODE_RGMII1 BIT(9) +#define MT7620_GPIO_MODE_RGMII2 BIT(10) +#define MT7620_GPIO_MODE_SPI BIT(11) +#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12) +#define MT7620_GPIO_MODE_WLED BIT(13) +#define MT7620_GPIO_MODE_JTAG BIT(15) +#define MT7620_GPIO_MODE_EPHY BIT(15) +#define MT7620_GPIO_MODE_WDT BIT(22) + +#endif diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h new file mode 100644 index 0000000..03ad716 --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/rt288x.h @@ -0,0 +1,53 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#ifndef _RT288X_REGS_H_ +#define _RT288X_REGS_H_ + +#define RT2880_SYSC_BASE 0x00300000 + +#define SYSC_REG_CHIP_NAME0 0x00 +#define SYSC_REG_CHIP_NAME1 0x04 +#define SYSC_REG_CHIP_ID 0x0c +#define SYSC_REG_SYSTEM_CONFIG 0x10 +#define SYSC_REG_CLKCFG 0x30 + +#define RT2880_CHIP_NAME0 0x38325452 +#define RT2880_CHIP_NAME1 0x20203038 + +#define CHIP_ID_ID_MASK 0xff +#define CHIP_ID_ID_SHIFT 8 +#define CHIP_ID_REV_MASK 0xff + +#define SYSTEM_CONFIG_CPUCLK_SHIFT 20 +#define SYSTEM_CONFIG_CPUCLK_MASK 0x3 +#define SYSTEM_CONFIG_CPUCLK_250 0x0 +#define SYSTEM_CONFIG_CPUCLK_266 0x1 +#define SYSTEM_CONFIG_CPUCLK_280 0x2 +#define SYSTEM_CONFIG_CPUCLK_300 0x3 + +#define RT2880_GPIO_MODE_I2C BIT(0) +#define RT2880_GPIO_MODE_UART0 BIT(1) +#define RT2880_GPIO_MODE_SPI BIT(2) +#define RT2880_GPIO_MODE_UART1 BIT(3) +#define RT2880_GPIO_MODE_JTAG BIT(4) +#define RT2880_GPIO_MODE_MDIO BIT(5) +#define RT2880_GPIO_MODE_SDRAM BIT(6) +#define RT2880_GPIO_MODE_PCI BIT(7) + +#define CLKCFG_SRAM_CS_N_WDT BIT(9) + +#define RT2880_SDRAM_BASE 0x08000000 +#define RT2880_MEM_SIZE_MIN 2 +#define RT2880_MEM_SIZE_MAX 128 + +#endif diff --git a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h new file mode 100644 index 0000000..72fc106 --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * Ralink RT288x specific CPU feature overrides + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _RT288X_CPU_FEATURE_OVERRIDES_H +#define _RT288X_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* _RT288X_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h index 7d344f2..069bf37 100644 --- a/arch/mips/include/asm/mach-ralink/rt305x.h +++ b/arch/mips/include/asm/mach-ralink/rt305x.h @@ -97,6 +97,14 @@ static inline int soc_is_rt5350(void) #define RT5350_SYSCFG0_CPUCLK_320 0x2 #define RT5350_SYSCFG0_CPUCLK_300 0x3 +#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12 +#define RT5350_SYSCFG0_DRAM_SIZE_MASK 7 +#define RT5350_SYSCFG0_DRAM_SIZE_2M 0 +#define RT5350_SYSCFG0_DRAM_SIZE_8M 1 +#define RT5350_SYSCFG0_DRAM_SIZE_16M 2 +#define RT5350_SYSCFG0_DRAM_SIZE_32M 3 +#define RT5350_SYSCFG0_DRAM_SIZE_64M 4 + /* multi function gpio pins */ #define RT305X_GPIO_I2C_SD 1 #define RT305X_GPIO_I2C_SCLK 2 @@ -136,4 +144,23 @@ static inline int soc_is_rt5350(void) #define RT305X_GPIO_MODE_SDRAM BIT(8) #define RT305X_GPIO_MODE_RGMII BIT(9) +#define RT3352_SYSC_REG_SYSCFG0 0x010 +#define RT3352_SYSC_REG_SYSCFG1 0x014 +#define RT3352_SYSC_REG_CLKCFG1 0x030 +#define RT3352_SYSC_REG_RSTCTRL 0x034 +#define RT3352_SYSC_REG_USB_PS 0x05c + +#define RT3352_CLKCFG0_XTAL_SEL BIT(20) +#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18) +#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT3352_RSTCTRL_UHST BIT(22) +#define RT3352_RSTCTRL_UDEV BIT(25) +#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10) + +#define RT305X_SDRAM_BASE 0x00000000 +#define RT305X_MEM_SIZE_MIN 2 +#define RT305X_MEM_SIZE_MAX 64 +#define RT3352_MEM_SIZE_MIN 2 +#define RT3352_MEM_SIZE_MAX 256 + #endif diff --git a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h new file mode 100644 index 0000000..917c286 --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * Ralink RT305x specific CPU feature overrides + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _RT305X_CPU_FEATURE_OVERRIDES_H +#define _RT305X_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 1 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* _RT305X_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h new file mode 100644 index 0000000..058382f --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/rt3883.h @@ -0,0 +1,252 @@ +/* + * Ralink RT3662/RT3883 SoC register definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_REGS_H_ +#define _RT3883_REGS_H_ + +#include <linux/bitops.h> + +#define RT3883_SDRAM_BASE 0x00000000 +#define RT3883_SYSC_BASE 0x10000000 +#define RT3883_TIMER_BASE 0x10000100 +#define RT3883_INTC_BASE 0x10000200 +#define RT3883_MEMC_BASE 0x10000300 +#define RT3883_UART0_BASE 0x10000500 +#define RT3883_PIO_BASE 0x10000600 +#define RT3883_FSCC_BASE 0x10000700 +#define RT3883_NANDC_BASE 0x10000810 +#define RT3883_I2C_BASE 0x10000900 +#define RT3883_I2S_BASE 0x10000a00 +#define RT3883_SPI_BASE 0x10000b00 +#define RT3883_UART1_BASE 0x10000c00 +#define RT3883_PCM_BASE 0x10002000 +#define RT3883_GDMA_BASE 0x10002800 +#define RT3883_CODEC1_BASE 0x10003000 +#define RT3883_CODEC2_BASE 0x10003800 +#define RT3883_FE_BASE 0x10100000 +#define RT3883_ROM_BASE 0x10118000 +#define RT3883_USBDEV_BASE 0x10112000 +#define RT3883_PCI_BASE 0x10140000 +#define RT3883_WLAN_BASE 0x10180000 +#define RT3883_USBHOST_BASE 0x101c0000 +#define RT3883_BOOT_BASE 0x1c000000 +#define RT3883_SRAM_BASE 0x1e000000 +#define RT3883_PCIMEM_BASE 0x20000000 + +#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE) +#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000) + +#define RT3883_SYSC_SIZE 0x100 +#define RT3883_TIMER_SIZE 0x100 +#define RT3883_INTC_SIZE 0x100 +#define RT3883_MEMC_SIZE 0x100 +#define RT3883_UART0_SIZE 0x100 +#define RT3883_UART1_SIZE 0x100 +#define RT3883_PIO_SIZE 0x100 +#define RT3883_FSCC_SIZE 0x100 +#define RT3883_NANDC_SIZE 0x0f0 +#define RT3883_I2C_SIZE 0x100 +#define RT3883_I2S_SIZE 0x100 +#define RT3883_SPI_SIZE 0x100 +#define RT3883_PCM_SIZE 0x800 +#define RT3883_GDMA_SIZE 0x800 +#define RT3883_CODEC1_SIZE 0x800 +#define RT3883_CODEC2_SIZE 0x800 +#define RT3883_FE_SIZE 0x10000 +#define RT3883_ROM_SIZE 0x4000 +#define RT3883_USBDEV_SIZE 0x4000 +#define RT3883_PCI_SIZE 0x40000 +#define RT3883_WLAN_SIZE 0x40000 +#define RT3883_USBHOST_SIZE 0x40000 +#define RT3883_BOOT_SIZE (32 * 1024 * 1024) +#define RT3883_SRAM_SIZE (32 * 1024 * 1024) + +/* SYSC registers */ +#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */ +#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */ +#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */ +#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */ +#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */ +#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */ +#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */ +#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/ +#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/ +#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */ +#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */ +#define RT3883_SYSC_REG_PCIE_CLK_GEN0 0x7c +#define RT3883_SYSC_REG_PCIE_CLK_GEN1 0x80 +#define RT3883_SYSC_REG_PCIE_CLK_GEN2 0x84 +#define RT3883_SYSC_REG_PMU 0x88 +#define RT3883_SYSC_REG_PMU1 0x8c + +#define RT3883_CHIP_NAME0 0x38335452 +#define RT3883_CHIP_NAME1 0x20203338 + +#define RT3883_REVID_VER_ID_MASK 0x0f +#define RT3883_REVID_VER_ID_SHIFT 8 +#define RT3883_REVID_ECO_ID_MASK 0x0f + +#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17) +#define RT3883_SYSCFG0_CPUCLK_SHIFT 8 +#define RT3883_SYSCFG0_CPUCLK_MASK 0x3 +#define RT3883_SYSCFG0_CPUCLK_250 0x0 +#define RT3883_SYSCFG0_CPUCLK_384 0x1 +#define RT3883_SYSCFG0_CPUCLK_480 0x2 +#define RT3883_SYSCFG0_CPUCLK_500 0x3 + +#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10) +#define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8) +#define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7) +#define RT3883_SYSCFG1_PCI_66M_MODE BIT(6) +#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2) + +#define RT3883_CLKCFG1_PCIE_CLK_EN BIT(21) +#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19) +#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) + +#define RT3883_GPIO_MODE_I2C BIT(0) +#define RT3883_GPIO_MODE_SPI BIT(1) +#define RT3883_GPIO_MODE_UART0_SHIFT 2 +#define RT3883_GPIO_MODE_UART0_MASK 0x7 +#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) +#define RT3883_GPIO_MODE_UARTF 0x0 +#define RT3883_GPIO_MODE_PCM_UARTF 0x1 +#define RT3883_GPIO_MODE_PCM_I2S 0x2 +#define RT3883_GPIO_MODE_I2S_UARTF 0x3 +#define RT3883_GPIO_MODE_PCM_GPIO 0x4 +#define RT3883_GPIO_MODE_GPIO_UARTF 0x5 +#define RT3883_GPIO_MODE_GPIO_I2S 0x6 +#define RT3883_GPIO_MODE_GPIO 0x7 +#define RT3883_GPIO_MODE_UART1 BIT(5) +#define RT3883_GPIO_MODE_JTAG BIT(6) +#define RT3883_GPIO_MODE_MDIO BIT(7) +#define RT3883_GPIO_MODE_GE1 BIT(9) +#define RT3883_GPIO_MODE_GE2 BIT(10) +#define RT3883_GPIO_MODE_PCI_SHIFT 11 +#define RT3883_GPIO_MODE_PCI_MASK 0x7 +#define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT) +#define RT3883_GPIO_MODE_LNA_A_SHIFT 16 +#define RT3883_GPIO_MODE_LNA_A_MASK 0x3 +#define _RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT) +#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3 +#define RT3883_GPIO_MODE_LNA_A _RT3883_GPIO_MODE_LNA_A(RT3883_GPIO_MODE_LNA_A_MASK) +#define RT3883_GPIO_MODE_LNA_G_SHIFT 18 +#define RT3883_GPIO_MODE_LNA_G_MASK 0x3 +#define _RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT) +#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3 +#define RT3883_GPIO_MODE_LNA_G _RT3883_GPIO_MODE_LNA_G(RT3883_GPIO_MODE_LNA_G_MASK) + +#define RT3883_GPIO_I2C_SD 1 +#define RT3883_GPIO_I2C_SCLK 2 +#define RT3883_GPIO_SPI_CS0 3 +#define RT3883_GPIO_SPI_CLK 4 +#define RT3883_GPIO_SPI_MOSI 5 +#define RT3883_GPIO_SPI_MISO 6 +#define RT3883_GPIO_7 7 +#define RT3883_GPIO_10 10 +#define RT3883_GPIO_11 11 +#define RT3883_GPIO_14 14 +#define RT3883_GPIO_UART1_TXD 15 +#define RT3883_GPIO_UART1_RXD 16 +#define RT3883_GPIO_JTAG_TDO 17 +#define RT3883_GPIO_JTAG_TDI 18 +#define RT3883_GPIO_JTAG_TMS 19 +#define RT3883_GPIO_JTAG_TCLK 20 +#define RT3883_GPIO_JTAG_TRST_N 21 +#define RT3883_GPIO_MDIO_MDC 22 +#define RT3883_GPIO_MDIO_MDIO 23 +#define RT3883_GPIO_LNA_PE_A0 32 +#define RT3883_GPIO_LNA_PE_A1 33 +#define RT3883_GPIO_LNA_PE_A2 34 +#define RT3883_GPIO_LNA_PE_G0 35 +#define RT3883_GPIO_LNA_PE_G1 36 +#define RT3883_GPIO_LNA_PE_G2 37 +#define RT3883_GPIO_PCI_AD0 40 +#define RT3883_GPIO_PCI_AD31 71 +#define RT3883_GPIO_GE2_TXD0 72 +#define RT3883_GPIO_GE2_TXD1 73 +#define RT3883_GPIO_GE2_TXD2 74 +#define RT3883_GPIO_GE2_TXD3 75 +#define RT3883_GPIO_GE2_TXEN 76 +#define RT3883_GPIO_GE2_TXCLK 77 +#define RT3883_GPIO_GE2_RXD0 78 +#define RT3883_GPIO_GE2_RXD1 79 +#define RT3883_GPIO_GE2_RXD2 80 +#define RT3883_GPIO_GE2_RXD3 81 +#define RT3883_GPIO_GE2_RXDV 82 +#define RT3883_GPIO_GE2_RXCLK 83 +#define RT3883_GPIO_GE1_TXD0 84 +#define RT3883_GPIO_GE1_TXD1 85 +#define RT3883_GPIO_GE1_TXD2 86 +#define RT3883_GPIO_GE1_TXD3 87 +#define RT3883_GPIO_GE1_TXEN 88 +#define RT3883_GPIO_GE1_TXCLK 89 +#define RT3883_GPIO_GE1_RXD0 90 +#define RT3883_GPIO_GE1_RXD1 91 +#define RT3883_GPIO_GE1_RXD2 92 +#define RT3883_GPIO_GE1_RXD3 93 +#define RT3883_GPIO_GE1_RXDV 94 +#define RT3883_GPIO_GE1_RXCLK 95 + +#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27) +#define RT3883_RSTCTRL_FLASH BIT(26) +#define RT3883_RSTCTRL_UDEV BIT(25) +#define RT3883_RSTCTRL_PCI BIT(24) +#define RT3883_RSTCTRL_PCIE BIT(23) +#define RT3883_RSTCTRL_UHST BIT(22) +#define RT3883_RSTCTRL_FE BIT(21) +#define RT3883_RSTCTRL_WLAN BIT(20) +#define RT3883_RSTCTRL_UART1 BIT(29) +#define RT3883_RSTCTRL_SPI BIT(18) +#define RT3883_RSTCTRL_I2S BIT(17) +#define RT3883_RSTCTRL_I2C BIT(16) +#define RT3883_RSTCTRL_NAND BIT(15) +#define RT3883_RSTCTRL_DMA BIT(14) +#define RT3883_RSTCTRL_PIO BIT(13) +#define RT3883_RSTCTRL_UART BIT(12) +#define RT3883_RSTCTRL_PCM BIT(11) +#define RT3883_RSTCTRL_MC BIT(10) +#define RT3883_RSTCTRL_INTC BIT(9) +#define RT3883_RSTCTRL_TIMER BIT(8) +#define RT3883_RSTCTRL_SYS BIT(0) + +#define RT3883_INTC_INT_SYSCTL BIT(0) +#define RT3883_INTC_INT_TIMER0 BIT(1) +#define RT3883_INTC_INT_TIMER1 BIT(2) +#define RT3883_INTC_INT_IA BIT(3) +#define RT3883_INTC_INT_PCM BIT(4) +#define RT3883_INTC_INT_UART0 BIT(5) +#define RT3883_INTC_INT_PIO BIT(6) +#define RT3883_INTC_INT_DMA BIT(7) +#define RT3883_INTC_INT_NAND BIT(8) +#define RT3883_INTC_INT_PERFC BIT(9) +#define RT3883_INTC_INT_I2S BIT(10) +#define RT3883_INTC_INT_UART1 BIT(12) +#define RT3883_INTC_INT_UHST BIT(18) +#define RT3883_INTC_INT_UDEV BIT(19) + +/* FLASH/SRAM/Codec Controller registers */ +#define RT3883_FSCC_REG_FLASH_CFG0 0x00 +#define RT3883_FSCC_REG_FLASH_CFG1 0x04 +#define RT3883_FSCC_REG_CODEC_CFG0 0x40 +#define RT3883_FSCC_REG_CODEC_CFG1 0x44 + +#define RT3883_FLASH_CFG_WIDTH_SHIFT 26 +#define RT3883_FLASH_CFG_WIDTH_MASK 0x3 +#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0 +#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1 +#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2 + +#define RT3883_SDRAM_BASE 0x00000000 +#define RT3883_MEM_SIZE_MIN 2 +#define RT3883_MEM_SIZE_MAX 256 + +#endif /* _RT3883_REGS_H_ */ diff --git a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h new file mode 100644 index 0000000..181fbf4 --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h @@ -0,0 +1,55 @@ +/* + * Ralink RT3662/RT3883 specific CPU feature overrides + * + * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _RT3883_CPU_FEATURE_OVERRIDES_H +#define _RT3883_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 1 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* _RT3883_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h index d9c8284..193c091 100644 --- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h @@ -28,11 +28,7 @@ /* #define cpu_has_prefetch ? */ #define cpu_has_mcheck 1 /* #define cpu_has_ejtag ? */ -#ifdef CONFIG_CPU_HAS_LLSC #define cpu_has_llsc 1 -#else -#define cpu_has_llsc 0 -#endif /* #define cpu_has_vtag_icache ? */ /* #define cpu_has_dc_aliases ? */ /* #define cpu_has_ic_fills_f_dc ? */ diff --git a/arch/mips/include/asm/mips_machine.h b/arch/mips/include/asm/mips_machine.h index 363bb35..9d00aeb 100644 --- a/arch/mips/include/asm/mips_machine.h +++ b/arch/mips/include/asm/mips_machine.h @@ -42,13 +42,9 @@ extern long __mips_machines_end; #ifdef CONFIG_MIPS_MACHINE int mips_machtype_setup(char *id) __init; void mips_machine_setup(void) __init; -void mips_set_machine_name(const char *name) __init; -char *mips_get_machine_name(void); #else static inline int mips_machtype_setup(char *id) { return 1; } static inline void mips_machine_setup(void) { } -static inline void mips_set_machine_name(const char *name) { } -static inline char *mips_get_machine_name(void) { return NULL; } #endif /* CONFIG_MIPS_MACHINE */ #endif /* __ASM_MIPS_MACHINE_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 12b70c2..0da44d4 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1166,7 +1166,10 @@ do { \ unsigned int __dspctl; \ \ __asm__ __volatile__( \ + " .set push \n" \ + " .set dsp \n" \ " rddsp %0, %x1 \n" \ + " .set pop \n" \ : "=r" (__dspctl) \ : "i" (mask)); \ __dspctl; \ @@ -1175,30 +1178,198 @@ do { \ #define wrdsp(val, mask) \ do { \ __asm__ __volatile__( \ + " .set push \n" \ + " .set dsp \n" \ " wrdsp %0, %x1 \n" \ + " .set pop \n" \ : \ : "r" (val), "i" (mask)); \ } while (0) -#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;}) -#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;}) -#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;}) -#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;}) - -#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;}) -#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;}) -#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;}) -#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;}) - -#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x)) -#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x)) -#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x)) -#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x)) - -#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x)) -#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x)) -#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x)) -#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x)) +#define mflo0() \ +({ \ + long mflo0; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac0 \n" \ + " .set pop \n" \ + : "=r" (mflo0)); \ + mflo0; \ +}) + +#define mflo1() \ +({ \ + long mflo1; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac1 \n" \ + " .set pop \n" \ + : "=r" (mflo1)); \ + mflo1; \ +}) + +#define mflo2() \ +({ \ + long mflo2; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac2 \n" \ + " .set pop \n" \ + : "=r" (mflo2)); \ + mflo2; \ +}) + +#define mflo3() \ +({ \ + long mflo3; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac3 \n" \ + " .set pop \n" \ + : "=r" (mflo3)); \ + mflo3; \ +}) + +#define mfhi0() \ +({ \ + long mfhi0; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac0 \n" \ + " .set pop \n" \ + : "=r" (mfhi0)); \ + mfhi0; \ +}) + +#define mfhi1() \ +({ \ + long mfhi1; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac1 \n" \ + " .set pop \n" \ + : "=r" (mfhi1)); \ + mfhi1; \ +}) + +#define mfhi2() \ +({ \ + long mfhi2; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac2 \n" \ + " .set pop \n" \ + : "=r" (mfhi2)); \ + mfhi2; \ +}) + +#define mfhi3() \ +({ \ + long mfhi3; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac3 \n" \ + " .set pop \n" \ + : "=r" (mfhi3)); \ + mfhi3; \ +}) + + +#define mtlo0(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac0 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mtlo1(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac1 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mtlo2(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac2 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mtlo3(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac3 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi0(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac0 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi1(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac1 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi2(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac2 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi3(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac3 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) #else diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index c42562d..8201160 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -26,10 +26,15 @@ #ifdef CONFIG_MIPS_PGD_C0_CONTEXT -#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ - tlbmiss_handler_setup_pgd((unsigned long)(pgd)) - -extern void tlbmiss_handler_setup_pgd(unsigned long pgd); +#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ +do { \ + void (*tlbmiss_handler_setup_pgd)(unsigned long); \ + extern u32 tlbmiss_handler_setup_pgd_array[16]; \ + \ + tlbmiss_handler_setup_pgd = \ + (__typeof__(tlbmiss_handler_setup_pgd)) tlbmiss_handler_setup_pgd_array; \ + tlbmiss_handler_setup_pgd((unsigned long)(pgd)); \ +} while (0) #define TLBMISS_HANDLER_SETUP() \ do { \ @@ -139,7 +144,7 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) { int i; - for_each_online_cpu(i) + for_each_possible_cpu(i) cpu_context(i, mm) = 0; return 0; diff --git a/arch/mips/include/asm/netlogic/haldefs.h b/arch/mips/include/asm/netlogic/haldefs.h index 419d8ae..79c7ccc 100644 --- a/arch/mips/include/asm/netlogic/haldefs.h +++ b/arch/mips/include/asm/netlogic/haldefs.h @@ -35,42 +35,13 @@ #ifndef __NLM_HAL_HALDEFS_H__ #define __NLM_HAL_HALDEFS_H__ +#include <linux/irqflags.h> /* for local_irq_disable */ + /* * This file contains platform specific memory mapped IO implementation * and will provide a way to read 32/64 bit memory mapped registers in * all ABIs */ -#if !defined(CONFIG_64BIT) && defined(CONFIG_CPU_XLP) -#error "o32 compile not supported on XLP yet" -#endif -/* - * For o32 compilation, we have to disable interrupts and enable KX bit to - * access 64 bit addresses or data. - * - * We need to disable interrupts because we save just the lower 32 bits of - * registers in interrupt handling. So if we get hit by an interrupt while - * using the upper 32 bits of a register, we lose. - */ -static inline uint32_t nlm_save_flags_kx(void) -{ - return change_c0_status(ST0_KX | ST0_IE, ST0_KX); -} - -static inline uint32_t nlm_save_flags_cop2(void) -{ - return change_c0_status(ST0_CU2 | ST0_IE, ST0_CU2); -} - -static inline void nlm_restore_flags(uint32_t sr) -{ - write_c0_status(sr); -} - -/* - * The n64 implementations are simple, the o32 implementations when they - * are added, will have to disable interrupts and enable KX before doing - * 64 bit ops. - */ static inline uint32_t nlm_read_reg(uint64_t base, uint32_t reg) { @@ -87,13 +58,40 @@ nlm_write_reg(uint64_t base, uint32_t reg, uint32_t val) *addr = val; } +/* + * For o32 compilation, we have to disable interrupts to access 64 bit + * registers + * + * We need to disable interrupts because we save just the lower 32 bits of + * registers in interrupt handling. So if we get hit by an interrupt while + * using the upper 32 bits of a register, we lose. + */ + static inline uint64_t nlm_read_reg64(uint64_t base, uint32_t reg) { uint64_t addr = base + (reg >> 1) * sizeof(uint64_t); volatile uint64_t *ptr = (volatile uint64_t *)(long)addr; - - return *ptr; + uint64_t val; + + if (sizeof(unsigned long) == 4) { + unsigned long flags; + + local_irq_save(flags); + __asm__ __volatile__( + ".set push" "\n\t" + ".set mips64" "\n\t" + "ld %L0, %1" "\n\t" + "dsra32 %M0, %L0, 0" "\n\t" + "sll %L0, %L0, 0" "\n\t" + ".set pop" "\n" + : "=r" (val) + : "m" (*ptr)); + local_irq_restore(flags); + } else + val = *ptr; + + return val; } static inline void @@ -102,7 +100,25 @@ nlm_write_reg64(uint64_t base, uint32_t reg, uint64_t val) uint64_t addr = base + (reg >> 1) * sizeof(uint64_t); volatile uint64_t *ptr = (volatile uint64_t *)(long)addr; - *ptr = val; + if (sizeof(unsigned long) == 4) { + unsigned long flags; + uint64_t tmp; + + local_irq_save(flags); + __asm__ __volatile__( + ".set push" "\n\t" + ".set mips64" "\n\t" + "dsll32 %L0, %L0, 0" "\n\t" + "dsrl32 %L0, %L0, 0" "\n\t" + "dsll32 %M0, %M0, 0" "\n\t" + "or %L0, %L0, %M0" "\n\t" + "sd %L0, %2" "\n\t" + ".set pop" "\n" + : "=r" (tmp) + : "0" (val), "m" (*ptr)); + local_irq_restore(flags); + } else + *ptr = val; } /* @@ -143,14 +159,6 @@ nlm_pcicfg_base(uint32_t devoffset) return nlm_io_base + devoffset; } -static inline uint64_t -nlm_xkphys_map_pcibar0(uint64_t pcibase) -{ - uint64_t paddr; - - paddr = nlm_read_reg(pcibase, 0x4) & ~0xfu; - return (uint64_t)0x9000000000000000 | paddr; -} #elif defined(CONFIG_CPU_XLR) static inline uint64_t diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h index 8ad2e0f..f299d31 100644 --- a/arch/mips/include/asm/netlogic/mips-extns.h +++ b/arch/mips/include/asm/netlogic/mips-extns.h @@ -38,21 +38,16 @@ /* * XLR and XLP interrupt request and interrupt mask registers */ -#define read_c0_eirr() __read_64bit_c0_register($9, 6) -#define read_c0_eimr() __read_64bit_c0_register($9, 7) -#define write_c0_eirr(val) __write_64bit_c0_register($9, 6, val) - /* - * Writing EIMR in 32 bit is a special case, the lower 8 bit of the - * EIMR is shadowed in the status register, so we cannot save and - * restore status register for split read. + * NOTE: Do not save/restore flags around write_c0_eimr(). + * On non-R2 platforms the flags has part of EIMR that is shadowed in STATUS + * register. Restoring flags will overwrite the lower 8 bits of EIMR. + * + * Call with interrupts disabled. */ #define write_c0_eimr(val) \ do { \ if (sizeof(unsigned long) == 4) { \ - unsigned long __flags; \ - \ - local_irq_save(__flags); \ __asm__ __volatile__( \ ".set\tmips64\n\t" \ "dsll\t%L0, %L0, 32\n\t" \ @@ -62,8 +57,6 @@ do { \ "dmtc0\t%L0, $9, 7\n\t" \ ".set\tmips0" \ : : "r" (val)); \ - __flags = (__flags & 0xffff00ff) | (((val) & 0xff) << 8);\ - local_irq_restore(__flags); \ } else \ __write_64bit_c0_register($9, 7, (val)); \ } while (0) @@ -128,7 +121,7 @@ static inline uint64_t read_c0_eirr_and_eimr(void) uint64_t val; #ifdef CONFIG_64BIT - val = read_c0_eimr() & read_c0_eirr(); + val = __read_64bit_c0_register($9, 6) & __read_64bit_c0_register($9, 7); #else __asm__ __volatile__( ".set push\n\t" @@ -143,7 +136,6 @@ static inline uint64_t read_c0_eirr_and_eimr(void) ".set pop" : "=r" (val)); #endif - return val; } diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h index 3df5301..a981f46 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h @@ -191,59 +191,6 @@ #define PIC_IRT_PCIE_LINK_2_INDEX 80 #define PIC_IRT_PCIE_LINK_3_INDEX 81 #define PIC_IRT_PCIE_LINK_INDEX(num) ((num) + PIC_IRT_PCIE_LINK_0_INDEX) -/* 78 to 81 */ -#define PIC_NUM_NA_IRTS 32 -/* 82 to 113 */ -#define PIC_IRT_NA_0_INDEX 82 -#define PIC_IRT_NA_INDEX(num) ((num) + PIC_IRT_NA_0_INDEX) -#define PIC_IRT_POE_INDEX 114 - -#define PIC_NUM_USB_IRTS 6 -#define PIC_IRT_USB_0_INDEX 115 -#define PIC_IRT_EHCI_0_INDEX 115 -#define PIC_IRT_OHCI_0_INDEX 116 -#define PIC_IRT_OHCI_1_INDEX 117 -#define PIC_IRT_EHCI_1_INDEX 118 -#define PIC_IRT_OHCI_2_INDEX 119 -#define PIC_IRT_OHCI_3_INDEX 120 -#define PIC_IRT_USB_INDEX(num) ((num) + PIC_IRT_USB_0_INDEX) -/* 115 to 120 */ -#define PIC_IRT_GDX_INDEX 121 -#define PIC_IRT_SEC_INDEX 122 -#define PIC_IRT_RSA_INDEX 123 - -#define PIC_NUM_COMP_IRTS 4 -#define PIC_IRT_COMP_0_INDEX 124 -#define PIC_IRT_COMP_INDEX(num) ((num) + PIC_IRT_COMP_0_INDEX) -/* 124 to 127 */ -#define PIC_IRT_GBU_INDEX 128 -#define PIC_IRT_ICC_0_INDEX 129 /* ICC - Inter Chip Coherency */ -#define PIC_IRT_ICC_1_INDEX 130 -#define PIC_IRT_ICC_2_INDEX 131 -#define PIC_IRT_CAM_INDEX 132 -#define PIC_IRT_UART_0_INDEX 133 -#define PIC_IRT_UART_1_INDEX 134 -#define PIC_IRT_I2C_0_INDEX 135 -#define PIC_IRT_I2C_1_INDEX 136 -#define PIC_IRT_SYS_0_INDEX 137 -#define PIC_IRT_SYS_1_INDEX 138 -#define PIC_IRT_JTAG_INDEX 139 -#define PIC_IRT_PIC_INDEX 140 -#define PIC_IRT_NBU_INDEX 141 -#define PIC_IRT_TCU_INDEX 142 -#define PIC_IRT_GCU_INDEX 143 /* GBC - Global Coherency */ -#define PIC_IRT_DMC_0_INDEX 144 -#define PIC_IRT_DMC_1_INDEX 145 - -#define PIC_NUM_GPIO_IRTS 4 -#define PIC_IRT_GPIO_0_INDEX 146 -#define PIC_IRT_GPIO_INDEX(num) ((num) + PIC_IRT_GPIO_0_INDEX) - -/* 146 to 149 */ -#define PIC_IRT_NOR_INDEX 150 -#define PIC_IRT_NAND_INDEX 151 -#define PIC_IRT_SPI_INDEX 152 -#define PIC_IRT_MMC_INDEX 153 #define PIC_CLOCK_TIMER 7 #define PIC_IRQ_BASE 8 diff --git a/arch/mips/include/asm/netlogic/xlp-hal/usb.h b/arch/mips/include/asm/netlogic/xlp-hal/usb.h deleted file mode 100644 index a9cd350..0000000 --- a/arch/mips/include/asm/netlogic/xlp-hal/usb.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (c) 2003-2012 Broadcom Corporation - * All Rights Reserved - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the Broadcom - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef __NLM_HAL_USB_H__ -#define __NLM_HAL_USB_H__ - -#define USB_CTL_0 0x01 -#define USB_PHY_0 0x0A -#define USB_PHY_RESET 0x01 -#define USB_PHY_PORT_RESET_0 0x10 -#define USB_PHY_PORT_RESET_1 0x20 -#define USB_CONTROLLER_RESET 0x01 -#define USB_INT_STATUS 0x0E -#define USB_INT_EN 0x0F -#define USB_PHY_INTERRUPT_EN 0x01 -#define USB_OHCI_INTERRUPT_EN 0x02 -#define USB_OHCI_INTERRUPT1_EN 0x04 -#define USB_OHCI_INTERRUPT2_EN 0x08 -#define USB_CTRL_INTERRUPT_EN 0x10 - -#ifndef __ASSEMBLY__ - -#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r) -#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_get_usb_pcibase(node, inst) \ - nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst)) -#define nlm_get_usb_hcd_base(node, inst) \ - nlm_xkphys_map_pcibar0(nlm_get_usb_pcibase(node, inst)) -#define nlm_get_usb_regbase(node, inst) \ - (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) - -#endif -#endif /* __NLM_HAL_USB_H__ */ diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index fdc62fb..8b8f6b3 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -8,6 +8,7 @@ #ifndef _ASM_PGTABLE_H #define _ASM_PGTABLE_H +#include <linux/mm_types.h> #include <linux/mmzone.h> #ifdef CONFIG_32BIT #include <asm/pgtable-32.h> diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h index 8808bf5..1e7e096 100644 --- a/arch/mips/include/asm/prom.h +++ b/arch/mips/include/asm/prom.h @@ -48,4 +48,7 @@ extern void __dt_setup_arch(struct boot_param_header *bph); static inline void device_tree_init(void) { } #endif /* CONFIG_OF */ +extern char *mips_get_machine_name(void); +extern void mips_set_machine_name(const char *name); + #endif /* __ASM_PROM_H */ diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h index 197f636..8efe5a9 100644 --- a/arch/mips/include/asm/signal.h +++ b/arch/mips/include/asm/signal.h @@ -21,6 +21,6 @@ #include <asm/sigcontext.h> #include <asm/siginfo.h> -#define __ARCH_HAS_ODD_SIGACTION +#define __ARCH_HAS_IRIX_SIGACTION #endif /* _ASM_SIGNAL_H */ diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h index 5130c88..78d201f 100644 --- a/arch/mips/include/asm/spinlock.h +++ b/arch/mips/include/asm/spinlock.h @@ -71,7 +71,6 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) " nop \n" " srl %[my_ticket], %[ticket], 16 \n" " andi %[ticket], %[ticket], 0xffff \n" - " andi %[my_ticket], %[my_ticket], 0xffff \n" " bne %[ticket], %[my_ticket], 4f \n" " subu %[ticket], %[my_ticket], %[ticket] \n" "2: \n" @@ -105,7 +104,6 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) " beqz %[my_ticket], 1b \n" " srl %[my_ticket], %[ticket], 16 \n" " andi %[ticket], %[ticket], 0xffff \n" - " andi %[my_ticket], %[my_ticket], 0xffff \n" " bne %[ticket], %[my_ticket], 4f \n" " subu %[ticket], %[my_ticket], %[ticket] \n" "2: \n" @@ -153,7 +151,6 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock) " \n" "1: ll %[ticket], %[ticket_ptr] \n" " srl %[my_ticket], %[ticket], 16 \n" - " andi %[my_ticket], %[my_ticket], 0xffff \n" " andi %[now_serving], %[ticket], 0xffff \n" " bne %[my_ticket], %[now_serving], 3f \n" " addu %[ticket], %[ticket], %[inc] \n" @@ -178,7 +175,6 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock) " \n" "1: ll %[ticket], %[ticket_ptr] \n" " srl %[my_ticket], %[ticket], 16 \n" - " andi %[my_ticket], %[my_ticket], 0xffff \n" " andi %[now_serving], %[ticket], 0xffff \n" " bne %[my_ticket], %[now_serving], 3f \n" " addu %[ticket], %[ticket], %[inc] \n" @@ -242,25 +238,16 @@ static inline void arch_read_lock(arch_rwlock_t *rw) : "m" (rw->lock) : "memory"); } else { - __asm__ __volatile__( - " .set noreorder # arch_read_lock \n" - "1: ll %1, %2 \n" - " bltz %1, 3f \n" - " addu %1, 1 \n" - "2: sc %1, %0 \n" - " beqz %1, 1b \n" - " nop \n" - " .subsection 2 \n" - "3: ll %1, %2 \n" - " bltz %1, 3b \n" - " addu %1, 1 \n" - " b 2b \n" - " nop \n" - " .previous \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); + do { + __asm__ __volatile__( + "1: ll %1, %2 # arch_read_lock \n" + " bltz %1, 1b \n" + " addu %1, 1 \n" + "2: sc %1, %0 \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } while (unlikely(!tmp)); } smp_llsc_mb(); @@ -285,21 +272,15 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) : "m" (rw->lock) : "memory"); } else { - __asm__ __volatile__( - " .set noreorder # arch_read_unlock \n" - "1: ll %1, %2 \n" - " sub %1, 1 \n" - " sc %1, %0 \n" - " beqz %1, 2f \n" - " nop \n" - " .subsection 2 \n" - "2: b 1b \n" - " nop \n" - " .previous \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); + do { + __asm__ __volatile__( + "1: ll %1, %2 # arch_read_unlock \n" + " sub %1, 1 \n" + " sc %1, %0 \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } while (unlikely(!tmp)); } } @@ -321,25 +302,16 @@ static inline void arch_write_lock(arch_rwlock_t *rw) : "m" (rw->lock) : "memory"); } else { - __asm__ __volatile__( - " .set noreorder # arch_write_lock \n" - "1: ll %1, %2 \n" - " bnez %1, 3f \n" - " lui %1, 0x8000 \n" - "2: sc %1, %0 \n" - " beqz %1, 3f \n" - " nop \n" - " .subsection 2 \n" - "3: ll %1, %2 \n" - " bnez %1, 3b \n" - " lui %1, 0x8000 \n" - " b 2b \n" - " nop \n" - " .previous \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); + do { + __asm__ __volatile__( + "1: ll %1, %2 # arch_write_lock \n" + " bnez %1, 1b \n" + " lui %1, 0x8000 \n" + "2: sc %1, %0 \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } while (unlikely(!tmp)); } smp_llsc_mb(); @@ -424,25 +396,21 @@ static inline int arch_write_trylock(arch_rwlock_t *rw) : "m" (rw->lock) : "memory"); } else { - __asm__ __volatile__( - " .set noreorder # arch_write_trylock \n" - " li %2, 0 \n" - "1: ll %1, %3 \n" - " bnez %1, 2f \n" - " lui %1, 0x8000 \n" - " sc %1, %0 \n" - " beqz %1, 3f \n" - " li %2, 1 \n" - "2: \n" - __WEAK_LLSC_MB - " .subsection 2 \n" - "3: b 1b \n" - " li %2, 0 \n" - " .previous \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) - : "m" (rw->lock) - : "memory"); + do { + __asm__ __volatile__( + " ll %1, %3 # arch_write_trylock \n" + " li %2, 0 \n" + " bnez %1, 2f \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " li %2, 1 \n" + "2: \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } while (unlikely(!tmp)); + + smp_llsc_mb(); } return ret; diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 178f792..895320e 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -58,8 +58,12 @@ struct thread_info { #define init_stack (init_thread_union.stack) /* How to get the thread information struct from C. */ -register struct thread_info *__current_thread_info __asm__("$28"); -#define current_thread_info() __current_thread_info +static inline struct thread_info *current_thread_info(void) +{ + register struct thread_info *__current_thread_info __asm__("$28"); + + return __current_thread_info; +} #endif /* !__ASSEMBLY__ */ diff --git a/arch/mips/include/uapi/asm/signal.h b/arch/mips/include/uapi/asm/signal.h index d6b18b4..addb9f5 100644 --- a/arch/mips/include/uapi/asm/signal.h +++ b/arch/mips/include/uapi/asm/signal.h @@ -72,6 +72,12 @@ typedef unsigned long old_sigset_t; /* at least 32 bits */ * * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single * Unix names RESETHAND and NODEFER respectively. + * + * SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever + * supported its use and no libc was using it, so the entire sa-restorer + * functionality was removed with lmo commit 39bffc12c3580ab for 2.5.48 + * retaining only the SA_RESTORER definition as a reminder to avoid + * accidental reuse of the mask bit. */ #define SA_ONSTACK 0x08000000 #define SA_RESETHAND 0x80000000 @@ -84,8 +90,6 @@ typedef unsigned long old_sigset_t; /* at least 32 bits */ #define SA_NOMASK SA_NODEFER #define SA_ONESHOT SA_RESETHAND -#define SA_RESTORER 0x04000000 /* Only for o32 */ - #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index f81d98f..cdb87b2 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -5,7 +5,7 @@ extra-y := head.o vmlinux.lds obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ - ptrace.o reset.o setup.o signal.o syscall.o \ + prom.o ptrace.o reset.o setup.o signal.o syscall.o \ time.o topology.o traps.o unaligned.o watch.o vdso.o ifdef CONFIG_FUNCTION_TRACER @@ -86,8 +86,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o -obj-$(CONFIG_OF) += prom.o - CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o @@ -100,29 +98,16 @@ obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o # -# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe -# to enable DSP assembler support here even if the MIPS Release 2 CPU we -# are targetting does not support DSP because all code-paths making use of -# it properly check that the running CPU *actually does* support these -# instructions. +# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not +# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches +# here because the compiler may use DSP ASE instructions (such as lwx) in +# code paths where we cannot check that the CPU we are running on supports it. +# Proper abstraction using HAVE_AS_DSP and macros is done in +# arch/mips/include/asm/mipsregs.h. # ifeq ($(CONFIG_CPU_MIPSR2), y) CFLAGS_DSP = -DHAVE_AS_DSP -# -# Check if assembler supports DSP ASE -# -ifeq ($(call cc-option-yn,-mdsp), y) -CFLAGS_DSP += -mdsp -endif - -# -# Check if assembler supports DSP ASE Rev2 -# -ifeq ($(call cc-option-yn,-mdspr2), y) -CFLAGS_DSP += -mdspr2 -endif - CFLAGS_signal.o = $(CFLAGS_DSP) CFLAGS_signal32.o = $(CFLAGS_DSP) CFLAGS_process.o = $(CFLAGS_DSP) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 6bfccc2..5fe66a0 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -580,6 +580,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) c->tlbsize = 48; break; case PRID_IMP_VR41XX: + set_isa(c, MIPS_CPU_ISA_III); + c->options = R4K_OPTS; + c->tlbsize = 32; switch (c->processor_id & 0xf0) { case PRID_REV_VR4111: c->cputype = CPU_VR4111; @@ -604,6 +607,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "NEC VR4131"; } else { c->cputype = CPU_VR4133; + c->options |= MIPS_CPU_LLSC; __cpu_name[cpu] = "NEC VR4133"; } break; @@ -613,9 +617,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "NEC Vr41xx"; break; } - set_isa(c, MIPS_CPU_ISA_III); - c->options = R4K_OPTS; - c->tlbsize = 32; break; case PRID_IMP_R4300: c->cputype = CPU_R4300; @@ -1226,10 +1227,8 @@ __cpuinit void cpu_probe(void) if (c->options & MIPS_CPU_FPU) { c->fpu_id = cpu_get_fpu_id(); - if (c->isa_level == MIPS_CPU_ISA_M32R1 || - c->isa_level == MIPS_CPU_ISA_M32R2 || - c->isa_level == MIPS_CPU_ISA_M64R1 || - c->isa_level == MIPS_CPU_ISA_M64R2) { + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | + MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) { if (c->fpu_id & MIPS_FPIR_3D) c->ases |= MIPS_ASE_MIPS3D; } diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 8eeee1c..db9655f 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -171,7 +171,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, err = compat_sys_shmctl(first, second, compat_ptr(ptr)); break; default: - err = -EINVAL; + err = -ENOSYS; break; } diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index 1658676..33d0671 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -46,10 +46,9 @@ PTR_L a5, PT_R9(sp) PTR_L a6, PT_R10(sp) PTR_L a7, PT_R11(sp) -#else - PTR_ADDIU sp, PT_SIZE #endif -.endm + PTR_ADDIU sp, PT_SIZE + .endm .macro RETURN_BACK jr ra @@ -68,7 +67,11 @@ NESTED(ftrace_caller, PT_SIZE, ra) .globl _mcount _mcount: b ftrace_stub - addiu sp,sp,8 +#ifdef CONFIG_32BIT + addiu sp,sp,8 +#else + nop +#endif /* When tracing is activated, it calls ftrace_caller+8 (aka here) */ lw t1, function_trace_stop diff --git a/arch/mips/kernel/mips_machine.c b/arch/mips/kernel/mips_machine.c index 411a058..8760975 100644 --- a/arch/mips/kernel/mips_machine.c +++ b/arch/mips/kernel/mips_machine.c @@ -11,9 +11,9 @@ #include <linux/slab.h> #include <asm/mips_machine.h> +#include <asm/prom.h> static struct mips_machine *mips_machine __initdata; -static char *mips_machine_name = "Unknown"; #define for_each_machine(mach) \ for ((mach) = (struct mips_machine *)&__mips_machines_start; \ @@ -21,25 +21,6 @@ static char *mips_machine_name = "Unknown"; (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \ (mach)++) -__init void mips_set_machine_name(const char *name) -{ - char *p; - - if (name == NULL) - return; - - p = kstrdup(name, GFP_KERNEL); - if (!p) - pr_err("MIPS: no memory for machine_name\n"); - - mips_machine_name = p; -} - -char *mips_get_machine_name(void) -{ - return mips_machine_name; -} - __init int mips_machtype_setup(char *id) { struct mips_machine *mach; @@ -79,7 +60,6 @@ __init void mips_machine_setup(void) return; mips_set_machine_name(mips_machine->mach_name); - pr_info("MIPS: machine is %s\n", mips_machine_name); if (mips_machine->mach_setup) mips_machine->mach_setup(); diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 135c4aa..1dd137b 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -12,7 +12,7 @@ #include <asm/cpu-features.h> #include <asm/mipsregs.h> #include <asm/processor.h> -#include <asm/mips_machine.h> +#include <asm/prom.h> unsigned int vced_count, vcei_count; @@ -67,7 +67,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpu_has_mips_r) { seq_printf(m, "isa\t\t\t:"); if (cpu_has_mips_1) - seq_printf(m, "%s", "mips1"); + seq_printf(m, "%s", " mips1"); if (cpu_has_mips_2) seq_printf(m, "%s", " mips2"); if (cpu_has_mips_3) diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index 028f6f8..5712bb5 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -23,6 +23,23 @@ #include <asm/page.h> #include <asm/prom.h> +static char mips_machine_name[64] = "Unknown"; + +__init void mips_set_machine_name(const char *name) +{ + if (name == NULL) + return; + + strncpy(mips_machine_name, name, sizeof(mips_machine_name)); + pr_info("MIPS: machine is %s\n", mips_get_machine_name()); +} + +char *mips_get_machine_name(void) +{ + return mips_machine_name; +} + +#ifdef CONFIG_OF int __init early_init_dt_scan_memory_arch(unsigned long node, const char *uname, int depth, void *data) @@ -50,6 +67,18 @@ void __init early_init_dt_setup_initrd_arch(unsigned long start, } #endif +int __init early_init_dt_scan_model(unsigned long node, const char *uname, + int depth, void *data) +{ + if (!depth) { + char *model = of_get_flat_dt_prop(node, "model", NULL); + + if (model) + mips_set_machine_name(model); + } + return 0; +} + void __init early_init_devtree(void *params) { /* Setup flat device-tree pointer */ @@ -65,6 +94,9 @@ void __init early_init_devtree(void *params) /* Scan memory nodes */ of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL); + + /* try to load the mips machine name */ + of_scan_flat_dt(early_init_dt_scan_model, NULL); } void __init __dt_setup_arch(struct boot_param_header *bph) @@ -79,3 +111,4 @@ void __init __dt_setup_arch(struct boot_param_header *bph) early_init_devtree(initial_boot_params); } +#endif diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 4c774d5..c7f9051 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -23,6 +23,7 @@ #include <linux/pfn.h> #include <linux/debugfs.h> #include <linux/kexec.h> +#include <linux/sizes.h> #include <asm/addrspace.h> #include <asm/bootinfo.h> @@ -77,6 +78,8 @@ EXPORT_SYMBOL(mips_io_port_base); static struct resource code_resource = { .name = "Kernel code", }; static struct resource data_resource = { .name = "Kernel data", }; +static void *detect_magic __initdata = detect_memory_region; + void __init add_memory_region(phys_t start, phys_t size, long type) { int x = boot_mem_map.nr_map; @@ -122,6 +125,25 @@ void __init add_memory_region(phys_t start, phys_t size, long type) boot_mem_map.nr_map++; } +void __init detect_memory_region(phys_t start, phys_t sz_min, phys_t sz_max) +{ + void *dm = &detect_magic; + phys_t size; + + for (size = sz_min; size < sz_max; size <<= 1) { + if (!memcmp(dm, dm + size, sizeof(detect_magic))) + break; + } + + pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n", + ((unsigned long long) size) / SZ_1M, + (unsigned long long) start, + ((unsigned long long) sz_min) / SZ_1M, + ((unsigned long long) sz_max) / SZ_1M); + + add_memory_region(start, size, BOOT_MEM_RAM); +} + static void __init print_memory_map(void) { int i; diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 59351e5..7a99e60 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -60,9 +60,9 @@ extern void check_wait(void); extern asmlinkage void r4k_wait(void); extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); -extern asmlinkage void handle_tlbm(void); -extern asmlinkage void handle_tlbl(void); -extern asmlinkage void handle_tlbs(void); +extern u32 handle_tlbl[]; +extern u32 handle_tlbs[]; +extern u32 handle_tlbm[]; extern asmlinkage void handle_adel(void); extern asmlinkage void handle_ades(void); extern asmlinkage void handle_ibe(void); @@ -1390,9 +1390,8 @@ unsigned long vi_handlers[64]; void __init *set_except_vector(int n, void *addr) { unsigned long handler = (unsigned long) addr; - unsigned long old_handler = exception_handlers[n]; + unsigned long old_handler = xchg(&exception_handlers[n], handler); - exception_handlers[n] = handler; if (n == 0 && cpu_has_divec) { unsigned long jump_mask = ~((1 << 28) - 1); u32 *buf = (u32 *)(ebase + 0x200); @@ -1410,7 +1409,7 @@ void __init *set_except_vector(int n, void *addr) return (void *)old_handler; } -static asmlinkage void do_default_vi(void) +static void do_default_vi(void) { show_regs(get_irq_regs()); panic("Caught unexpected vectored interrupt."); @@ -1571,7 +1570,7 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu) #ifdef CONFIG_64BIT status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX; #endif - if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) + if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV) status_set |= ST0_XX; if (cpu_has_dsp) status_set |= ST0_MX; diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c index 81f1dcf..3b2a1e7 100644 --- a/arch/mips/lib/bitops.c +++ b/arch/mips/lib/bitops.c @@ -19,7 +19,7 @@ */ void __mips_set_bit(unsigned long nr, volatile unsigned long *addr) { - volatile unsigned long *a = addr; + unsigned long *a = (unsigned long *)addr; unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; @@ -41,7 +41,7 @@ EXPORT_SYMBOL(__mips_set_bit); */ void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr) { - volatile unsigned long *a = addr; + unsigned long *a = (unsigned long *)addr; unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; @@ -63,7 +63,7 @@ EXPORT_SYMBOL(__mips_clear_bit); */ void __mips_change_bit(unsigned long nr, volatile unsigned long *addr) { - volatile unsigned long *a = addr; + unsigned long *a = (unsigned long *)addr; unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; @@ -86,16 +86,16 @@ EXPORT_SYMBOL(__mips_change_bit); int __mips_test_and_set_bit(unsigned long nr, volatile unsigned long *addr) { - volatile unsigned long *a = addr; + unsigned long *a = (unsigned long *)addr; unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; - unsigned long res; + int res; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - res = (mask & *a); + res = (mask & *a) != 0; *a |= mask; raw_local_irq_restore(flags); return res; @@ -112,16 +112,16 @@ EXPORT_SYMBOL(__mips_test_and_set_bit); int __mips_test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr) { - volatile unsigned long *a = addr; + unsigned long *a = (unsigned long *)addr; unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; - unsigned long res; + int res; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - res = (mask & *a); + res = (mask & *a) != 0; *a |= mask; raw_local_irq_restore(flags); return res; @@ -137,16 +137,16 @@ EXPORT_SYMBOL(__mips_test_and_set_bit_lock); */ int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - volatile unsigned long *a = addr; + unsigned long *a = (unsigned long *)addr; unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; - unsigned long res; + int res; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - res = (mask & *a); + res = (mask & *a) != 0; *a &= ~mask; raw_local_irq_restore(flags); return res; @@ -162,16 +162,16 @@ EXPORT_SYMBOL(__mips_test_and_clear_bit); */ int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - volatile unsigned long *a = addr; + unsigned long *a = (unsigned long *)addr; unsigned bit = nr & SZLONG_MASK; unsigned long mask; unsigned long flags; - unsigned long res; + int res; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - res = (mask & *a); + res = (mask & *a) != 0; *a ^= mask; raw_local_irq_restore(flags); return res; diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 507147a..a6adffb 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -270,7 +270,7 @@ LEAF(csum_partial) #endif /* odd buffer alignment? */ -#ifdef CPU_MIPSR2 +#ifdef CONFIG_CPU_MIPSR2 wsbh v1, sum movn sum, v1, t7 #else @@ -670,7 +670,7 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) addu sum, v1 #endif -#ifdef CPU_MIPSR2 +#ifdef CONFIG_CPU_MIPSR2 wsbh v1, sum movn sum, v1, odd #else diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c index cd160be..6807f71 100644 --- a/arch/mips/lib/mips-atomic.c +++ b/arch/mips/lib/mips-atomic.c @@ -13,6 +13,7 @@ #include <linux/compiler.h> #include <linux/preempt.h> #include <linux/export.h> +#include <linux/stringify.h> #if !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC) @@ -34,8 +35,11 @@ * * Workaround: mask EXL bit of the result or place a nop before mfc0. */ -__asm__( - " .macro arch_local_irq_disable\n" +notrace void arch_local_irq_disable(void) +{ + preempt_disable(); + + __asm__ __volatile__( " .set push \n" " .set noat \n" #ifdef CONFIG_MIPS_MT_SMTC @@ -52,108 +56,98 @@ __asm__( " .set noreorder \n" " mtc0 $1,$12 \n" #endif - " irq_disable_hazard \n" + " " __stringify(__irq_disable_hazard) " \n" " .set pop \n" - " .endm \n"); + : /* no outputs */ + : /* no inputs */ + : "memory"); -notrace void arch_local_irq_disable(void) -{ - preempt_disable(); - __asm__ __volatile__( - "arch_local_irq_disable" - : /* no outputs */ - : /* no inputs */ - : "memory"); preempt_enable(); } EXPORT_SYMBOL(arch_local_irq_disable); -__asm__( - " .macro arch_local_irq_save result \n" +notrace unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + + preempt_disable(); + + __asm__ __volatile__( " .set push \n" " .set reorder \n" " .set noat \n" #ifdef CONFIG_MIPS_MT_SMTC - " mfc0 \\result, $2, 1 \n" - " ori $1, \\result, 0x400 \n" + " mfc0 %[flags], $2, 1 \n" + " ori $1, %[flags], 0x400 \n" " .set noreorder \n" " mtc0 $1, $2, 1 \n" - " andi \\result, \\result, 0x400 \n" + " andi %[flags], %[flags], 0x400 \n" #elif defined(CONFIG_CPU_MIPSR2) /* see irqflags.h for inline function */ #else - " mfc0 \\result, $12 \n" - " ori $1, \\result, 0x1f \n" + " mfc0 %[flags], $12 \n" + " ori $1, %[flags], 0x1f \n" " xori $1, 0x1f \n" " .set noreorder \n" " mtc0 $1, $12 \n" #endif - " irq_disable_hazard \n" + " " __stringify(__irq_disable_hazard) " \n" " .set pop \n" - " .endm \n"); + : [flags] "=r" (flags) + : /* no inputs */ + : "memory"); -notrace unsigned long arch_local_irq_save(void) -{ - unsigned long flags; - preempt_disable(); - asm volatile("arch_local_irq_save\t%0" - : "=r" (flags) - : /* no inputs */ - : "memory"); preempt_enable(); + return flags; } EXPORT_SYMBOL(arch_local_irq_save); +notrace void arch_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of branch and call overhead on each + * local_irq_restore() + */ + if (unlikely(!(flags & 0x0400))) + smtc_ipi_replay(); +#endif + preempt_disable(); -__asm__( - " .macro arch_local_irq_restore flags \n" + __asm__ __volatile__( " .set push \n" " .set noreorder \n" " .set noat \n" #ifdef CONFIG_MIPS_MT_SMTC - "mfc0 $1, $2, 1 \n" - "andi \\flags, 0x400 \n" - "ori $1, 0x400 \n" - "xori $1, 0x400 \n" - "or \\flags, $1 \n" - "mtc0 \\flags, $2, 1 \n" + " mfc0 $1, $2, 1 \n" + " andi %[flags], 0x400 \n" + " ori $1, 0x400 \n" + " xori $1, 0x400 \n" + " or %[flags], $1 \n" + " mtc0 %[flags], $2, 1 \n" #elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) /* see irqflags.h for inline function */ #elif defined(CONFIG_CPU_MIPSR2) /* see irqflags.h for inline function */ #else " mfc0 $1, $12 \n" - " andi \\flags, 1 \n" + " andi %[flags], 1 \n" " ori $1, 0x1f \n" " xori $1, 0x1f \n" - " or \\flags, $1 \n" - " mtc0 \\flags, $12 \n" + " or %[flags], $1 \n" + " mtc0 %[flags], $12 \n" #endif - " irq_disable_hazard \n" + " " __stringify(__irq_disable_hazard) " \n" " .set pop \n" - " .endm \n"); + : [flags] "=r" (__tmp1) + : "0" (flags) + : "memory"); -notrace void arch_local_irq_restore(unsigned long flags) -{ - unsigned long __tmp1; - -#ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC kernel needs to do a software replay of queued - * IPIs, at the cost of branch and call overhead on each - * local_irq_restore() - */ - if (unlikely(!(flags & 0x0400))) - smtc_ipi_replay(); -#endif - preempt_disable(); - __asm__ __volatile__( - "arch_local_irq_restore\t%0" - : "=r" (__tmp1) - : "0" (flags) - : "memory"); preempt_enable(); } EXPORT_SYMBOL(arch_local_irq_restore); @@ -164,11 +158,36 @@ notrace void __arch_local_irq_restore(unsigned long flags) unsigned long __tmp1; preempt_disable(); + __asm__ __volatile__( - "arch_local_irq_restore\t%0" - : "=r" (__tmp1) - : "0" (flags) - : "memory"); + " .set push \n" + " .set noreorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 $1, $2, 1 \n" + " andi %[flags], 0x400 \n" + " ori $1, 0x400 \n" + " xori $1, 0x400 \n" + " or %[flags], $1 \n" + " mtc0 %[flags], $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) + /* see irqflags.h for inline function */ +#elif defined(CONFIG_CPU_MIPSR2) + /* see irqflags.h for inline function */ +#else + " mfc0 $1, $12 \n" + " andi %[flags], 1 \n" + " ori $1, 0x1f \n" + " xori $1, 0x1f \n" + " or %[flags], $1 \n" + " mtc0 %[flags], $12 \n" +#endif + " " __stringify(__irq_disable_hazard) " \n" + " .set pop \n" + : [flags] "=r" (__tmp1) + : "0" (flags) + : "memory"); + preempt_enable(); } EXPORT_SYMBOL(__arch_local_irq_restore); diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index b5aedb2..96f4d5a 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1249,10 +1249,8 @@ static void __cpuinit setup_scache(void) return; default: - if (c->isa_level == MIPS_CPU_ISA_M32R1 || - c->isa_level == MIPS_CPU_ISA_M32R2 || - c->isa_level == MIPS_CPU_ISA_M64R1 || - c->isa_level == MIPS_CPU_ISA_M64R2) { + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | + MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) { #ifdef CONFIG_MIPS_CPU_SCACHE if (mips_sc_init ()) { scache_size = c->scache.ways * c->scache.sets * c->scache.linesz; diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index a29fba5..4eb8dcf 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -247,6 +247,11 @@ void __cpuinit build_clear_page(void) struct uasm_label *l = labels; struct uasm_reloc *r = relocs; int i; + static atomic_t run_once = ATOMIC_INIT(0); + + if (atomic_xchg(&run_once, 1)) { + return; + } memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); @@ -389,6 +394,11 @@ void __cpuinit build_copy_page(void) struct uasm_label *l = labels; struct uasm_reloc *r = relocs; int i; + static atomic_t run_once = ATOMIC_INIT(0); + + if (atomic_xchg(&run_once, 1)) { + return; + } memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index 93d937b..df96da7 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -98,10 +98,8 @@ static inline int __init mips_sc_probe(void) c->scache.flags |= MIPS_CACHE_NOT_PRESENT; /* Ignore anything but MIPSxx processors */ - if (c->isa_level != MIPS_CPU_ISA_M32R1 && - c->isa_level != MIPS_CPU_ISA_M32R2 && - c->isa_level != MIPS_CPU_ISA_M64R1 && - c->isa_level != MIPS_CPU_ISA_M64R2) + if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | + MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2))) return 0; /* Does this MIPS32/MIPS64 CPU have a config2 register? */ diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 820e661..3b3822a 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -1458,17 +1458,17 @@ u32 handle_tlbl[FASTPATH_SIZE] __cacheline_aligned; u32 handle_tlbs[FASTPATH_SIZE] __cacheline_aligned; u32 handle_tlbm[FASTPATH_SIZE] __cacheline_aligned; #ifdef CONFIG_MIPS_PGD_C0_CONTEXT -u32 tlbmiss_handler_setup_pgd[16] __cacheline_aligned; +u32 tlbmiss_handler_setup_pgd_array[16] __cacheline_aligned; static void __cpuinit build_r4000_setup_pgd(void) { const int a0 = 4; const int a1 = 5; - u32 *p = tlbmiss_handler_setup_pgd; + u32 *p = tlbmiss_handler_setup_pgd_array; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; - memset(tlbmiss_handler_setup_pgd, 0, sizeof(tlbmiss_handler_setup_pgd)); + memset(tlbmiss_handler_setup_pgd_array, 0, sizeof(tlbmiss_handler_setup_pgd_array)); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); @@ -1496,15 +1496,15 @@ static void __cpuinit build_r4000_setup_pgd(void) uasm_i_jr(&p, 31); UASM_i_MTC0(&p, a0, 31, pgd_reg); } - if (p - tlbmiss_handler_setup_pgd > ARRAY_SIZE(tlbmiss_handler_setup_pgd)) - panic("tlbmiss_handler_setup_pgd space exceeded"); + if (p - tlbmiss_handler_setup_pgd_array > ARRAY_SIZE(tlbmiss_handler_setup_pgd_array)) + panic("tlbmiss_handler_setup_pgd_array space exceeded"); uasm_resolve_relocs(relocs, labels); - pr_debug("Wrote tlbmiss_handler_setup_pgd (%u instructions).\n", - (unsigned int)(p - tlbmiss_handler_setup_pgd)); + pr_debug("Wrote tlbmiss_handler_setup_pgd_array (%u instructions).\n", + (unsigned int)(p - tlbmiss_handler_setup_pgd_array)); dump_handler("tlbmiss_handler", - tlbmiss_handler_setup_pgd, - ARRAY_SIZE(tlbmiss_handler_setup_pgd)); + tlbmiss_handler_setup_pgd_array, + ARRAY_SIZE(tlbmiss_handler_setup_pgd_array)); } #endif @@ -2162,8 +2162,11 @@ void __cpuinit build_tlb_refill_handler(void) case CPU_TX3922: case CPU_TX3927: #ifndef CONFIG_MIPS_PGD_C0_CONTEXT - build_r3000_tlb_refill_handler(); + if (cpu_has_local_ebase) + build_r3000_tlb_refill_handler(); if (!run_once) { + if (!cpu_has_local_ebase) + build_r3000_tlb_refill_handler(); build_r3000_tlb_load_handler(); build_r3000_tlb_store_handler(); build_r3000_tlb_modify_handler(); @@ -2192,9 +2195,12 @@ void __cpuinit build_tlb_refill_handler(void) build_r4000_tlb_load_handler(); build_r4000_tlb_store_handler(); build_r4000_tlb_modify_handler(); + if (!cpu_has_local_ebase) + build_r4000_tlb_refill_handler(); run_once++; } - build_r4000_tlb_refill_handler(); + if (cpu_has_local_ebase) + build_r4000_tlb_refill_handler(); } } @@ -2207,7 +2213,7 @@ void __cpuinit flush_tlb_handlers(void) local_flush_icache_range((unsigned long)handle_tlbm, (unsigned long)handle_tlbm + sizeof(handle_tlbm)); #ifdef CONFIG_MIPS_PGD_C0_CONTEXT - local_flush_icache_range((unsigned long)tlbmiss_handler_setup_pgd, - (unsigned long)tlbmiss_handler_setup_pgd + sizeof(handle_tlbm)); + local_flush_icache_range((unsigned long)tlbmiss_handler_setup_pgd_array, + (unsigned long)tlbmiss_handler_setup_pgd_array + sizeof(handle_tlbm)); #endif } diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig index 3c05bf9..e0873a3 100644 --- a/arch/mips/netlogic/Kconfig +++ b/arch/mips/netlogic/Kconfig @@ -2,13 +2,22 @@ if NLM_XLP_BOARD || NLM_XLR_BOARD if NLM_XLP_BOARD config DT_XLP_EVP - bool "Built-in device tree for XLP EVP/SVP boards" + bool "Built-in device tree for XLP EVP boards" default y help - Add an FDT blob for XLP EVP and SVP boards into the kernel. + Add an FDT blob for XLP EVP boards into the kernel. This DTB will be used if the firmware does not pass in a DTB - pointer to the kernel. The corresponding DTS file is at - arch/mips/netlogic/dts/xlp_evp.dts + pointer to the kernel. The corresponding DTS file is at + arch/mips/netlogic/dts/xlp_evp.dts + +config DT_XLP_SVP + bool "Built-in device tree for XLP SVP boards" + default y + help + Add an FDT blob for XLP VP boards into the kernel. + This DTB will be used if the firmware does not pass in a DTB + pointer to the kernel. The corresponding DTS file is at + arch/mips/netlogic/dts/xlp_svp.dts config NLM_MULTINODE bool "Support for multi-chip boards" diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c index 2bb95dc..ffba524 100644 --- a/arch/mips/netlogic/common/smp.c +++ b/arch/mips/netlogic/common/smp.c @@ -148,8 +148,7 @@ void nlm_cpus_done(void) int nlm_cpu_ready[NR_CPUS]; unsigned long nlm_next_gp; unsigned long nlm_next_sp; - -cpumask_t phys_cpu_present_map; +static cpumask_t phys_cpu_present_mask; void nlm_boot_secondary(int logical_cpu, struct task_struct *idle) { @@ -169,11 +168,12 @@ void __init nlm_smp_setup(void) { unsigned int boot_cpu; int num_cpus, i, ncore; + char buf[64]; boot_cpu = hard_smp_processor_id(); - cpumask_clear(&phys_cpu_present_map); + cpumask_clear(&phys_cpu_present_mask); - cpumask_set_cpu(boot_cpu, &phys_cpu_present_map); + cpumask_set_cpu(boot_cpu, &phys_cpu_present_mask); __cpu_number_map[boot_cpu] = 0; __cpu_logical_map[0] = boot_cpu; set_cpu_possible(0, true); @@ -185,7 +185,7 @@ void __init nlm_smp_setup(void) * it is only set for ASPs (see smpboot.S) */ if (nlm_cpu_ready[i]) { - cpumask_set_cpu(i, &phys_cpu_present_map); + cpumask_set_cpu(i, &phys_cpu_present_mask); __cpu_number_map[i] = num_cpus; __cpu_logical_map[num_cpus] = i; set_cpu_possible(num_cpus, true); @@ -193,16 +193,19 @@ void __init nlm_smp_setup(void) } } + cpumask_scnprintf(buf, ARRAY_SIZE(buf), &phys_cpu_present_mask); + pr_info("Physical CPU mask: %s\n", buf); + cpumask_scnprintf(buf, ARRAY_SIZE(buf), cpu_possible_mask); + pr_info("Possible CPU mask: %s\n", buf); + /* check with the cores we have worken up */ for (ncore = 0, i = 0; i < NLM_NR_NODES; i++) ncore += hweight32(nlm_get_node(i)->coremask); - pr_info("Phys CPU present map: %lx, possible map %lx\n", - (unsigned long)cpumask_bits(&phys_cpu_present_map)[0], - (unsigned long)cpumask_bits(cpu_possible_mask)[0]); - pr_info("Detected (%dc%dt) %d Slave CPU(s)\n", ncore, nlm_threads_per_core, num_cpus); + + /* switch NMI handler to boot CPUs */ nlm_set_nmi_handler(nlm_boot_secondary_cpus); } diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile index d117d46..aecb6fa 100644 --- a/arch/mips/netlogic/dts/Makefile +++ b/arch/mips/netlogic/dts/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o +obj-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb.o diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts index 7628b54..e14f423 100644 --- a/arch/mips/netlogic/dts/xlp_evp.dts +++ b/arch/mips/netlogic/dts/xlp_evp.dts @@ -20,7 +20,7 @@ #address-cells = <2>; #size-cells = <1>; compatible = "simple-bus"; - ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG 1 0 0 0x16000000 0x01000000>; // GBU chipselects serial0: serial@30000 { diff --git a/arch/mips/netlogic/dts/xlp_svp.dts b/arch/mips/netlogic/dts/xlp_svp.dts new file mode 100644 index 0000000..8af4bdb --- /dev/null +++ b/arch/mips/netlogic/dts/xlp_svp.dts @@ -0,0 +1,124 @@ +/* + * XLP3XX Device Tree Source for SVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-SVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + memory { + device_type = "memory"; + reg = <0 0x00100000 0 0x0FF00000 // 255M at 1M + 0 0x20000000 0 0xa0000000 // 2560M at 512M + 0 0xe0000000 0 0x40000000>; + }; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x01000000>; // GBU chipselects + + serial0: serial@30000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x30100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + serial1: serial@31000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x31100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <18>; + }; + i2c0: ocores@32000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x32100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <30>; + }; + i2c1: ocores@33000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x33100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <31>; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + + dtt@4c { + compatible = "national,lm90"; + reg = <0x4c>; + }; + }; + pic: pic@4000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x4000 0x200>; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c index c68fd40..87560e4 100644 --- a/arch/mips/netlogic/xlp/nlm_hal.c +++ b/arch/mips/netlogic/xlp/nlm_hal.c @@ -61,43 +61,61 @@ void nlm_node_init(int node) int nlm_irq_to_irt(int irq) { - if (!PIC_IRQ_IS_IRT(irq)) - return -1; + uint64_t pcibase; + int devoff, irt; switch (irq) { case PIC_UART_0_IRQ: - return PIC_IRT_UART_0_INDEX; + devoff = XLP_IO_UART0_OFFSET(0); + break; case PIC_UART_1_IRQ: - return PIC_IRT_UART_1_INDEX; - case PIC_PCIE_LINK_0_IRQ: - return PIC_IRT_PCIE_LINK_0_INDEX; - case PIC_PCIE_LINK_1_IRQ: - return PIC_IRT_PCIE_LINK_1_INDEX; - case PIC_PCIE_LINK_2_IRQ: - return PIC_IRT_PCIE_LINK_2_INDEX; - case PIC_PCIE_LINK_3_IRQ: - return PIC_IRT_PCIE_LINK_3_INDEX; + devoff = XLP_IO_UART1_OFFSET(0); + break; case PIC_EHCI_0_IRQ: - return PIC_IRT_EHCI_0_INDEX; + devoff = XLP_IO_USB_EHCI0_OFFSET(0); + break; case PIC_EHCI_1_IRQ: - return PIC_IRT_EHCI_1_INDEX; + devoff = XLP_IO_USB_EHCI1_OFFSET(0); + break; case PIC_OHCI_0_IRQ: - return PIC_IRT_OHCI_0_INDEX; + devoff = XLP_IO_USB_OHCI0_OFFSET(0); + break; case PIC_OHCI_1_IRQ: - return PIC_IRT_OHCI_1_INDEX; + devoff = XLP_IO_USB_OHCI1_OFFSET(0); + break; case PIC_OHCI_2_IRQ: - return PIC_IRT_OHCI_2_INDEX; + devoff = XLP_IO_USB_OHCI2_OFFSET(0); + break; case PIC_OHCI_3_IRQ: - return PIC_IRT_OHCI_3_INDEX; + devoff = XLP_IO_USB_OHCI3_OFFSET(0); + break; case PIC_MMC_IRQ: - return PIC_IRT_MMC_INDEX; + devoff = XLP_IO_SD_OFFSET(0); + break; case PIC_I2C_0_IRQ: - return PIC_IRT_I2C_0_INDEX; + devoff = XLP_IO_I2C0_OFFSET(0); + break; case PIC_I2C_1_IRQ: - return PIC_IRT_I2C_1_INDEX; + devoff = XLP_IO_I2C1_OFFSET(0); + break; default: - return -1; + devoff = 0; + break; } + + if (devoff != 0) { + pcibase = nlm_pcicfg_base(devoff); + irt = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG) & 0xffff; + /* HW bug, I2C 1 irt entry is off by one */ + if (irq == PIC_I2C_1_IRQ) + irt = irt + 1; + } else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) { + /* HW bug, PCI IRT entries are bad on early silicon, fix */ + irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ); + } else { + irt = -1; + } + return irt; } unsigned int nlm_get_core_frequency(int node, int core) diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c index 4894d62..af31914 100644 --- a/arch/mips/netlogic/xlp/setup.c +++ b/arch/mips/netlogic/xlp/setup.c @@ -56,7 +56,7 @@ uint64_t nlm_io_base; struct nlm_soc_info nlm_nodes[NLM_NR_NODES]; cpumask_t nlm_cpumask = CPU_MASK_CPU0; unsigned int nlm_threads_per_core; -extern u32 __dtb_start[]; +extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_start[]; static void nlm_linux_exit(void) { @@ -82,8 +82,24 @@ void __init plat_mem_setup(void) * 64-bit, so convert pointer. */ fdtp = (void *)(long)fw_arg0; - if (!fdtp) - fdtp = __dtb_start; + if (!fdtp) { + switch (current_cpu_data.processor_id & 0xff00) { +#ifdef CONFIG_DT_XLP_SVP + case PRID_IMP_NETLOGIC_XLP3XX: + fdtp = __dtb_xlp_svp_begin; + break; +#endif +#ifdef CONFIG_DT_XLP_EVP + case PRID_IMP_NETLOGIC_XLP8XX: + fdtp = __dtb_xlp_evp_begin; + break; +#endif + default: + /* Pick a built-in if any, and hope for the best */ + fdtp = __dtb_start; + break; + } + } fdtp = phys_to_virt(__pa(fdtp)); early_init_devtree(fdtp); } diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c index 1d0b66c..9c401dd 100644 --- a/arch/mips/netlogic/xlp/usb-init.c +++ b/arch/mips/netlogic/xlp/usb-init.c @@ -42,7 +42,30 @@ #include <asm/netlogic/haldefs.h> #include <asm/netlogic/xlp-hal/iomap.h> #include <asm/netlogic/xlp-hal/xlp.h> -#include <asm/netlogic/xlp-hal/usb.h> + +/* + * USB glue logic registers, used only during initialization + */ +#define USB_CTL_0 0x01 +#define USB_PHY_0 0x0A +#define USB_PHY_RESET 0x01 +#define USB_PHY_PORT_RESET_0 0x10 +#define USB_PHY_PORT_RESET_1 0x20 +#define USB_CONTROLLER_RESET 0x01 +#define USB_INT_STATUS 0x0E +#define USB_INT_EN 0x0F +#define USB_PHY_INTERRUPT_EN 0x01 +#define USB_OHCI_INTERRUPT_EN 0x02 +#define USB_OHCI_INTERRUPT1_EN 0x04 +#define USB_OHCI_INTERRUPT2_EN 0x08 +#define USB_CTRL_INTERRUPT_EN 0x10 + +#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_usb_pcibase(node, inst) \ + nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst)) +#define nlm_get_usb_regbase(node, inst) \ + (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) static void nlm_usb_intr_en(int node, int port) { @@ -99,23 +122,23 @@ static void nlm_usb_fixup_final(struct pci_dev *dev) dev->dev.coherent_dma_mask = DMA_BIT_MASK(64); switch (dev->devfn) { case 0x10: - dev->irq = PIC_EHCI_0_IRQ; - break; + dev->irq = PIC_EHCI_0_IRQ; + break; case 0x11: - dev->irq = PIC_OHCI_0_IRQ; - break; + dev->irq = PIC_OHCI_0_IRQ; + break; case 0x12: - dev->irq = PIC_OHCI_1_IRQ; - break; + dev->irq = PIC_OHCI_1_IRQ; + break; case 0x13: - dev->irq = PIC_EHCI_1_IRQ; - break; + dev->irq = PIC_EHCI_1_IRQ; + break; case 0x14: - dev->irq = PIC_OHCI_2_IRQ; - break; + dev->irq = PIC_OHCI_2_IRQ; + break; case 0x15: - dev->irq = PIC_OHCI_3_IRQ; - break; + dev->irq = PIC_OHCI_3_IRQ; + break; } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI, diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index 1fd3614..e4b1140 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -41,7 +41,7 @@ static int (*save_perf_irq)(void); * first hardware thread in the core for setup and init. * Skip CPUs with non-zero hardware thread id (4 hwt per core) */ -#ifdef CONFIG_CPU_XLR +#if defined(CONFIG_CPU_XLR) && defined(CONFIG_SMP) #define oprofile_skip_cpu(c) ((cpu_logical_map(c) & 0x3) != 0) #else #define oprofile_skip_cpu(c) 0 diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c index 38a80c8..d1faece 100644 --- a/arch/mips/pci/pci-alchemy.c +++ b/arch/mips/pci/pci-alchemy.c @@ -19,7 +19,7 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/tlbmisc.h> -#ifdef CONFIG_DEBUG_PCI +#ifdef CONFIG_PCI_DEBUG #define DBG(x...) printk(KERN_DEBUG x) #else #define DBG(x...) do {} while (0) @@ -162,7 +162,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, if (status & (1 << 29)) { *data = 0xffffffff; error = -1; - DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d", + DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n", access_type, bus->number, device); } else if ((status >> 28) & 0xf) { DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n", diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c index 412ec02..18517dd 100644 --- a/arch/mips/pci/pci-ar71xx.c +++ b/arch/mips/pci/pci-ar71xx.c @@ -366,9 +366,9 @@ static int ar71xx_pci_probe(struct platform_device *pdev) if (!res) return -EINVAL; - apc->cfg_base = devm_request_and_ioremap(&pdev->dev, res); - if (!apc->cfg_base) - return -ENOMEM; + apc->cfg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(apc->cfg_base)) + return PTR_ERR(apc->cfg_base); apc->irq = platform_get_irq(pdev, 0); if (apc->irq < 0) diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 8a0700d..65ec032 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -365,25 +365,25 @@ static int ar724x_pci_probe(struct platform_device *pdev) if (!res) return -EINVAL; - apc->ctrl_base = devm_request_and_ioremap(&pdev->dev, res); - if (apc->ctrl_base == NULL) - return -EBUSY; + apc->ctrl_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(apc->ctrl_base)) + return PTR_ERR(apc->ctrl_base); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); if (!res) return -EINVAL; - apc->devcfg_base = devm_request_and_ioremap(&pdev->dev, res); - if (!apc->devcfg_base) - return -EBUSY; + apc->devcfg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(apc->devcfg_base)) + return PTR_ERR(apc->devcfg_base); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base"); if (!res) return -EINVAL; - apc->crp_base = devm_request_and_ioremap(&pdev->dev, res); - if (apc->crp_base == NULL) - return -EBUSY; + apc->crp_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(apc->crp_base)) + return PTR_ERR(apc->crp_base); apc->irq = platform_get_irq(pdev, 0); if (apc->irq < 0) diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c index 88e781c..2eb9542 100644 --- a/arch/mips/pci/pci-bcm63xx.c +++ b/arch/mips/pci/pci-bcm63xx.c @@ -121,11 +121,17 @@ void __iomem *pci_iospace_start; static void __init bcm63xx_reset_pcie(void) { u32 val; + u32 reg; /* enable SERDES */ - val = bcm_misc_readl(MISC_SERDES_CTRL_REG); + if (BCMCPU_IS_6328()) + reg = MISC_SERDES_CTRL_6328_REG; + else + reg = MISC_SERDES_CTRL_6362_REG; + + val = bcm_misc_readl(reg); val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN; - bcm_misc_writel(val, MISC_SERDES_CTRL_REG); + bcm_misc_writel(val, reg); /* reset the PCIe core */ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1); @@ -330,6 +336,7 @@ static int __init bcm63xx_pci_init(void) switch (bcm63xx_get_cpu_id()) { case BCM6328_CPU_ID: + case BCM6362_CPU_ID: return bcm63xx_register_pcie(); case BCM6348_CPU_ID: case BCM6358_CPU_ID: diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig index a0b0197..026e823 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -6,12 +6,23 @@ choice help Select Ralink MIPS SoC type. + config SOC_RT288X + bool "RT288x" + config SOC_RT305X bool "RT305x" select USB_ARCH_HAS_HCD select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI + config SOC_RT3883 + bool "RT3883" + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + + config SOC_MT7620 + bool "MT7620" + endchoice choice @@ -23,10 +34,22 @@ choice config DTB_RT_NONE bool "None" + config DTB_RT2880_EVAL + bool "RT2880 eval kit" + depends on SOC_RT288X + config DTB_RT305X_EVAL bool "RT305x eval kit" depends on SOC_RT305X + config DTB_RT3883_EVAL + bool "RT3883 eval kit" + depends on SOC_RT3883 + + config DTB_MT7620A_EVAL + bool "MT7620A eval kit" + depends on SOC_MT7620 + endchoice endif diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile index 939757f..38cf1a8 100644 --- a/arch/mips/ralink/Makefile +++ b/arch/mips/ralink/Makefile @@ -8,7 +8,10 @@ obj-y := prom.o of.o reset.o clk.o irq.o +obj-$(CONFIG_SOC_RT288X) += rt288x.o obj-$(CONFIG_SOC_RT305X) += rt305x.o +obj-$(CONFIG_SOC_RT3883) += rt3883.o +obj-$(CONFIG_SOC_MT7620) += mt7620.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform index 6babd65..cda4b66 100644 --- a/arch/mips/ralink/Platform +++ b/arch/mips/ralink/Platform @@ -5,6 +5,24 @@ core-$(CONFIG_RALINK) += arch/mips/ralink/ cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink # +# Ralink RT288x +# +load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000 +cflags-$(CONFIG_SOC_RT288X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x + +# # Ralink RT305x # load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000 +cflags-$(CONFIG_SOC_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x + +# +# Ralink RT3883 +# +load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000 +cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883 + +# +# Ralink MT7620 +# +load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000 diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h index 3009903..83144c3 100644 --- a/arch/mips/ralink/common.h +++ b/arch/mips/ralink/common.h @@ -22,13 +22,22 @@ struct ralink_pinmux { struct ralink_pinmux_grp *mode; struct ralink_pinmux_grp *uart; int uart_shift; + u32 uart_mask; void (*wdt_reset)(void); + struct ralink_pinmux_grp *pci; + int pci_shift; + u32 pci_mask; }; -extern struct ralink_pinmux gpio_pinmux; +extern struct ralink_pinmux rt_gpio_pinmux; struct ralink_soc_info { unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; unsigned char *compatible; + + unsigned long mem_base; + unsigned long mem_size; + unsigned long mem_size_min; + unsigned long mem_size_max; }; extern struct ralink_soc_info soc_info; diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile index 1a69fb3..18194fa 100644 --- a/arch/mips/ralink/dts/Makefile +++ b/arch/mips/ralink/dts/Makefile @@ -1 +1,4 @@ +obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o +obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o +obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi new file mode 100644 index 0000000..08bf24f --- /dev/null +++ b/arch/mips/ralink/dts/mt7620a.dtsi @@ -0,0 +1,58 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,mtk7620a-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,mt7620a-sysc"; + reg = <0x0 0x100>; + }; + + intc: intc@200 { + compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + uartlite@c00 { + compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; +}; diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts new file mode 100644 index 0000000..35eb874 --- /dev/null +++ b/arch/mips/ralink/dts/mt7620a_eval.dts @@ -0,0 +1,16 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc"; + model = "Ralink MT7620A evaluation board"; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; +}; diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi new file mode 100644 index 0000000..182afde --- /dev/null +++ b/arch/mips/ralink/dts/rt2880.dtsi @@ -0,0 +1,58 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt2880-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips4KEc"; + }; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@300000 { + compatible = "palmbus"; + reg = <0x300000 0x200000>; + ranges = <0x0 0x300000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt2880-sysc"; + reg = <0x0 0x100>; + }; + + intc: intc@200 { + compatible = "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt2880-memc"; + reg = <0x300 0x100>; + }; + + uartlite@c00 { + compatible = "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + reg-shift = <2>; + }; + }; +}; diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts new file mode 100644 index 0000000..322d700 --- /dev/null +++ b/arch/mips/ralink/dts/rt2880_eval.dts @@ -0,0 +1,46 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc"; + model = "Ralink RT2880 evaluation board"; + + memory@0 { + reg = <0x8000000 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x400000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "calibration"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x3b0000>; + }; + }; +}; diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi index 069d066..ef7da1e 100644 --- a/arch/mips/ralink/dts/rt3050.dtsi +++ b/arch/mips/ralink/dts/rt3050.dtsi @@ -1,7 +1,7 @@ / { #address-cells = <1>; #size-cells = <1>; - compatible = "ralink,rt3050-soc", "ralink,rt3052-soc"; + compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc"; cpus { cpu@0 { @@ -9,10 +9,6 @@ }; }; - chosen { - bootargs = "console=ttyS0,57600 init=/init"; - }; - cpuintc: cpuintc@0 { #address-cells = <0>; #interrupt-cells = <1>; @@ -23,7 +19,7 @@ palmbus@10000000 { compatible = "palmbus"; reg = <0x10000000 0x200000>; - ranges = <0x0 0x10000000 0x1FFFFF>; + ranges = <0x0 0x10000000 0x1FFFFF>; #address-cells = <1>; #size-cells = <1>; @@ -33,11 +29,6 @@ reg = <0x0 0x100>; }; - timer@100 { - compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt"; - reg = <0x100 0x100>; - }; - intc: intc@200 { compatible = "ralink,rt3052-intc", "ralink,rt2880-intc"; reg = <0x200 0x100>; @@ -54,45 +45,6 @@ reg = <0x300 0x100>; }; - gpio0: gpio@600 { - compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; - reg = <0x600 0x34>; - - gpio-controller; - #gpio-cells = <2>; - - ralink,ngpio = <24>; - ralink,regs = [ 00 04 08 0c - 20 24 28 2c - 30 34 ]; - }; - - gpio1: gpio@638 { - compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; - reg = <0x638 0x24>; - - gpio-controller; - #gpio-cells = <2>; - - ralink,ngpio = <16>; - ralink,regs = [ 00 04 08 0c - 10 14 18 1c - 20 24 ]; - }; - - gpio2: gpio@660 { - compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; - reg = <0x660 0x24>; - - gpio-controller; - #gpio-cells = <2>; - - ralink,ngpio = <12>; - ralink,regs = [ 00 04 08 0c - 10 14 18 1c - 20 24 ]; - }; - uartlite@c00 { compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; reg = <0xc00 0x100>; diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts index 148a590..df17f5f 100644 --- a/arch/mips/ralink/dts/rt3052_eval.dts +++ b/arch/mips/ralink/dts/rt3052_eval.dts @@ -3,8 +3,6 @@ /include/ "rt3050.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc"; model = "Ralink RT3052 evaluation board"; @@ -12,12 +10,8 @@ reg = <0x0 0x2000000>; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmmux = "uartlite", "spi"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <0>; - }; + chosen { + bootargs = "console=ttyS0,57600"; }; cfi@1f000000 { diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi new file mode 100644 index 0000000..3b131dd --- /dev/null +++ b/arch/mips/ralink/dts/rt3883.dtsi @@ -0,0 +1,58 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3883-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips74Kc"; + }; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + intc: intc@200 { + compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3883-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + uartlite@c00 { + compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; +}; diff --git a/arch/mips/ralink/dts/rt3883_eval.dts b/arch/mips/ralink/dts/rt3883_eval.dts new file mode 100644 index 0000000..2fa6b33 --- /dev/null +++ b/arch/mips/ralink/dts/rt3883_eval.dts @@ -0,0 +1,16 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc"; + model = "Ralink RT3883 evaluation board"; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; +}; diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c index c4ae47e..b46d041 100644 --- a/arch/mips/ralink/early_printk.c +++ b/arch/mips/ralink/early_printk.c @@ -11,7 +11,11 @@ #include <asm/addrspace.h> +#ifdef CONFIG_SOC_RT288X +#define EARLY_UART_BASE 0x300c00 +#else #define EARLY_UART_BASE 0x10000c00 +#endif #define UART_REG_RX 0x00 #define UART_REG_TX 0x04 diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c index 6d054c5..320b1f1 100644 --- a/arch/mips/ralink/irq.c +++ b/arch/mips/ralink/irq.c @@ -31,6 +31,7 @@ #define INTC_INT_GLOBAL BIT(31) #define RALINK_CPU_IRQ_INTC (MIPS_CPU_IRQ_BASE + 2) +#define RALINK_CPU_IRQ_PCI (MIPS_CPU_IRQ_BASE + 4) #define RALINK_CPU_IRQ_FE (MIPS_CPU_IRQ_BASE + 5) #define RALINK_CPU_IRQ_WIFI (MIPS_CPU_IRQ_BASE + 6) #define RALINK_CPU_IRQ_COUNTER (MIPS_CPU_IRQ_BASE + 7) @@ -104,6 +105,9 @@ asmlinkage void plat_irq_dispatch(void) else if (pending & STATUSF_IP6) do_IRQ(RALINK_CPU_IRQ_WIFI); + else if (pending & STATUSF_IP4) + do_IRQ(RALINK_CPU_IRQ_PCI); + else if (pending & STATUSF_IP2) do_IRQ(RALINK_CPU_IRQ_INTC); @@ -162,6 +166,7 @@ static int __init intc_of_init(struct device_node *node, irq_set_chained_handler(irq, ralink_intc_irq_handler); irq_set_handler_data(irq, domain); + /* tell the kernel which irq is used for performance monitoring */ cp0_perfcount_irq = irq_create_mapping(domain, 9); return 0; diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c new file mode 100644 index 0000000..0018b1a --- /dev/null +++ b/arch/mips/ralink/mt7620.c @@ -0,0 +1,234 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mipsregs.h> +#include <asm/mach-ralink/ralink_regs.h> +#include <asm/mach-ralink/mt7620.h> + +#include "common.h" + +/* does the board have sdram or ddram */ +static int dram_type; + +/* the pll dividers */ +static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 }; + +static struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = MT7620_GPIO_MODE_I2C, + .gpio_first = 1, + .gpio_last = 2, + }, { + .name = "spi", + .mask = MT7620_GPIO_MODE_SPI, + .gpio_first = 3, + .gpio_last = 6, + }, { + .name = "uartlite", + .mask = MT7620_GPIO_MODE_UART1, + .gpio_first = 15, + .gpio_last = 16, + }, { + .name = "wdt", + .mask = MT7620_GPIO_MODE_WDT, + .gpio_first = 17, + .gpio_last = 17, + }, { + .name = "mdio", + .mask = MT7620_GPIO_MODE_MDIO, + .gpio_first = 22, + .gpio_last = 23, + }, { + .name = "rgmii1", + .mask = MT7620_GPIO_MODE_RGMII1, + .gpio_first = 24, + .gpio_last = 35, + }, { + .name = "spi refclk", + .mask = MT7620_GPIO_MODE_SPI_REF_CLK, + .gpio_first = 37, + .gpio_last = 39, + }, { + .name = "jtag", + .mask = MT7620_GPIO_MODE_JTAG, + .gpio_first = 40, + .gpio_last = 44, + }, { + /* shared lines with jtag */ + .name = "ephy", + .mask = MT7620_GPIO_MODE_EPHY, + .gpio_first = 40, + .gpio_last = 44, + }, { + .name = "nand", + .mask = MT7620_GPIO_MODE_JTAG, + .gpio_first = 45, + .gpio_last = 59, + }, { + .name = "rgmii2", + .mask = MT7620_GPIO_MODE_RGMII2, + .gpio_first = 60, + .gpio_last = 71, + }, { + .name = "wled", + .mask = MT7620_GPIO_MODE_WLED, + .gpio_first = 72, + .gpio_last = 72, + }, {0} +}; + +static struct ralink_pinmux_grp uart_mux[] = { + { + .name = "uartf", + .mask = MT7620_GPIO_MODE_UARTF, + .gpio_first = 7, + .gpio_last = 14, + }, { + .name = "pcm uartf", + .mask = MT7620_GPIO_MODE_PCM_UARTF, + .gpio_first = 7, + .gpio_last = 14, + }, { + .name = "pcm i2s", + .mask = MT7620_GPIO_MODE_PCM_I2S, + .gpio_first = 7, + .gpio_last = 14, + }, { + .name = "i2s uartf", + .mask = MT7620_GPIO_MODE_I2S_UARTF, + .gpio_first = 7, + .gpio_last = 14, + }, { + .name = "pcm gpio", + .mask = MT7620_GPIO_MODE_PCM_GPIO, + .gpio_first = 11, + .gpio_last = 14, + }, { + .name = "gpio uartf", + .mask = MT7620_GPIO_MODE_GPIO_UARTF, + .gpio_first = 7, + .gpio_last = 10, + }, { + .name = "gpio i2s", + .mask = MT7620_GPIO_MODE_GPIO_I2S, + .gpio_first = 7, + .gpio_last = 10, + }, { + .name = "gpio", + .mask = MT7620_GPIO_MODE_GPIO, + }, {0} +}; + +struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .uart = uart_mux, + .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT, + .uart_mask = MT7620_GPIO_MODE_UART0_MASK, +}; + +void __init ralink_clk_init(void) +{ + unsigned long cpu_rate, sys_rate; + u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); + u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); + u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK; + u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK; + + if (cpu_clk) { + cpu_rate = 480000000; + } else if (!swconfig) { + cpu_rate = 600000000; + } else { + u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO; + u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO; + + cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000; + } + + if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) + sys_rate = cpu_rate / 4; + else + sys_rate = cpu_rate / 3; + + ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("10000100.timer", 40000000); + ralink_clk_add("10000500.uart", 40000000); + ralink_clk_add("10000c00.uartlite", 40000000); +} + +void __init ralink_of_remap(void) +{ + rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc"); + rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc"); + + if (!rt_sysc_membase || !rt_memc_membase) + panic("Failed to remap core resources"); +} + +void prom_soc_init(struct ralink_soc_info *soc_info) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE); + unsigned char *name = NULL; + u32 n0; + u32 n1; + u32 rev; + u32 cfg0; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + + if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) { + name = "MT7620N"; + soc_info->compatible = "ralink,mt7620n-soc"; + } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) { + name = "MT7620A"; + soc_info->compatible = "ralink,mt7620a-soc"; + } else { + panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + } + + rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); + + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s ver:%u eco:%u", + name, + (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, + (rev & CHIP_REV_ECO_MASK)); + + cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); + dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; + + switch (dram_type) { + case SYSCFG0_DRAM_TYPE_SDRAM: + soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; + soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; + break; + + case SYSCFG0_DRAM_TYPE_DDR1: + soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; + break; + + case SYSCFG0_DRAM_TYPE_DDR2: + soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; + break; + default: + BUG(); + } + soc_info->mem_base = MT7620_DRAM_BASE; +} diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index 4165e70..fb15695 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -11,6 +11,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/init.h> +#include <linux/sizes.h> #include <linux/of_fdt.h> #include <linux/kernel.h> #include <linux/bootmem.h> @@ -85,6 +86,14 @@ void __init plat_mem_setup(void) * parsed resulting in our memory appearing */ __dt_setup_arch(&__dtb_start); + + if (soc_info.mem_size) + add_memory_region(soc_info.mem_base, soc_info.mem_size, + BOOT_MEM_RAM); + else + detect_memory_region(soc_info.mem_base, + soc_info.mem_size_min * SZ_1M, + soc_info.mem_size_max * SZ_1M); } static int __init plat_of_setup(void) diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c new file mode 100644 index 0000000..f87de1a --- /dev/null +++ b/arch/mips/ralink/rt288x.c @@ -0,0 +1,143 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mipsregs.h> +#include <asm/mach-ralink/ralink_regs.h> +#include <asm/mach-ralink/rt288x.h> + +#include "common.h" + +static struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = RT2880_GPIO_MODE_I2C, + .gpio_first = 1, + .gpio_last = 2, + }, { + .name = "spi", + .mask = RT2880_GPIO_MODE_SPI, + .gpio_first = 3, + .gpio_last = 6, + }, { + .name = "uartlite", + .mask = RT2880_GPIO_MODE_UART0, + .gpio_first = 7, + .gpio_last = 14, + }, { + .name = "jtag", + .mask = RT2880_GPIO_MODE_JTAG, + .gpio_first = 17, + .gpio_last = 21, + }, { + .name = "mdio", + .mask = RT2880_GPIO_MODE_MDIO, + .gpio_first = 22, + .gpio_last = 23, + }, { + .name = "sdram", + .mask = RT2880_GPIO_MODE_SDRAM, + .gpio_first = 24, + .gpio_last = 39, + }, { + .name = "pci", + .mask = RT2880_GPIO_MODE_PCI, + .gpio_first = 40, + .gpio_last = 71, + }, {0} +}; + +static void rt288x_wdt_reset(void) +{ + u32 t; + + /* enable WDT reset output on pin SRAM_CS_N */ + t = rt_sysc_r32(SYSC_REG_CLKCFG); + t |= CLKCFG_SRAM_CS_N_WDT; + rt_sysc_w32(t, SYSC_REG_CLKCFG); +} + +struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .wdt_reset = rt288x_wdt_reset, +}; + +void __init ralink_clk_init(void) +{ + unsigned long cpu_rate; + u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); + t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); + + switch (t) { + case SYSTEM_CONFIG_CPUCLK_250: + cpu_rate = 250000000; + break; + case SYSTEM_CONFIG_CPUCLK_266: + cpu_rate = 266666667; + break; + case SYSTEM_CONFIG_CPUCLK_280: + cpu_rate = 280000000; + break; + case SYSTEM_CONFIG_CPUCLK_300: + cpu_rate = 300000000; + break; + } + + ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("300100.timer", cpu_rate / 2); + ralink_clk_add("300120.watchdog", cpu_rate / 2); + ralink_clk_add("300500.uart", cpu_rate / 2); + ralink_clk_add("300c00.uartlite", cpu_rate / 2); + ralink_clk_add("400000.ethernet", cpu_rate / 2); +} + +void __init ralink_of_remap(void) +{ + rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); + rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc"); + + if (!rt_sysc_membase || !rt_memc_membase) + panic("Failed to remap core resources"); +} + +void prom_soc_init(struct ralink_soc_info *soc_info) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); + const char *name; + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + id = __raw_readl(sysc + SYSC_REG_CHIP_ID); + + if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) { + soc_info->compatible = "ralink,r2880-soc"; + name = "RT2880"; + } else { + panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1); + } + + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s id:%u rev:%u", + name, + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); + + soc_info->mem_base = RT2880_SDRAM_BASE; + soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; + soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; +} diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c index 0a4bbdc..ca7ee3a 100644 --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c @@ -22,7 +22,7 @@ enum rt305x_soc_type rt305x_soc; -struct ralink_pinmux_grp mode_mux[] = { +static struct ralink_pinmux_grp mode_mux[] = { { .name = "i2c", .mask = RT305X_GPIO_MODE_I2C, @@ -61,7 +61,7 @@ struct ralink_pinmux_grp mode_mux[] = { }, {0} }; -struct ralink_pinmux_grp uart_mux[] = { +static struct ralink_pinmux_grp uart_mux[] = { { .name = "uartf", .mask = RT305X_GPIO_MODE_UARTF, @@ -91,19 +91,19 @@ struct ralink_pinmux_grp uart_mux[] = { .name = "gpio uartf", .mask = RT305X_GPIO_MODE_GPIO_UARTF, .gpio_first = RT305X_GPIO_7, - .gpio_last = RT305X_GPIO_14, + .gpio_last = RT305X_GPIO_10, }, { .name = "gpio i2s", .mask = RT305X_GPIO_MODE_GPIO_I2S, .gpio_first = RT305X_GPIO_7, - .gpio_last = RT305X_GPIO_14, + .gpio_last = RT305X_GPIO_10, }, { .name = "gpio", .mask = RT305X_GPIO_MODE_GPIO, }, {0} }; -void rt305x_wdt_reset(void) +static void rt305x_wdt_reset(void) { u32 t; @@ -114,16 +114,53 @@ void rt305x_wdt_reset(void) rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG); } -struct ralink_pinmux gpio_pinmux = { +struct ralink_pinmux rt_gpio_pinmux = { .mode = mode_mux, .uart = uart_mux, .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT, + .uart_mask = RT305X_GPIO_MODE_UART0_MASK, .wdt_reset = rt305x_wdt_reset, }; +static unsigned long rt5350_get_mem_size(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); + unsigned long ret; + u32 t; + + t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG); + t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) & + RT5350_SYSCFG0_DRAM_SIZE_MASK; + + switch (t) { + case RT5350_SYSCFG0_DRAM_SIZE_2M: + ret = 2; + break; + case RT5350_SYSCFG0_DRAM_SIZE_8M: + ret = 8; + break; + case RT5350_SYSCFG0_DRAM_SIZE_16M: + ret = 16; + break; + case RT5350_SYSCFG0_DRAM_SIZE_32M: + ret = 32; + break; + case RT5350_SYSCFG0_DRAM_SIZE_64M: + ret = 64; + break; + default: + panic("rt5350: invalid DRAM size: %u", t); + break; + } + + return ret; +} + void __init ralink_clk_init(void) { unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate; + unsigned long wmac_rate = 40000000; + u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); if (soc_is_rt305x() || soc_is_rt3350()) { @@ -176,11 +213,21 @@ void __init ralink_clk_init(void) BUG(); } + if (soc_is_rt3352() || soc_is_rt5350()) { + u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0); + + if (!(val & RT3352_CLKCFG0_XTAL_SEL)) + wmac_rate = 20000000; + } + ralink_clk_add("cpu", cpu_rate); ralink_clk_add("10000b00.spi", sys_rate); ralink_clk_add("10000100.timer", wdt_rate); + ralink_clk_add("10000120.watchdog", wdt_rate); ralink_clk_add("10000500.uart", uart_rate); ralink_clk_add("10000c00.uartlite", uart_rate); + ralink_clk_add("10100000.ethernet", sys_rate); + ralink_clk_add("10180000.wmac", wmac_rate); } void __init ralink_of_remap(void) @@ -239,4 +286,15 @@ void prom_soc_init(struct ralink_soc_info *soc_info) name, (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, (id & CHIP_ID_REV_MASK)); + + soc_info->mem_base = RT305X_SDRAM_BASE; + if (soc_is_rt5350()) { + soc_info->mem_size = rt5350_get_mem_size(); + } else if (soc_is_rt305x() || soc_is_rt3350()) { + soc_info->mem_size_min = RT305X_MEM_SIZE_MIN; + soc_info->mem_size_max = RT305X_MEM_SIZE_MAX; + } else if (soc_is_rt3352()) { + soc_info->mem_size_min = RT3352_MEM_SIZE_MIN; + soc_info->mem_size_max = RT3352_MEM_SIZE_MAX; + } } diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c new file mode 100644 index 0000000..b474ac2 --- /dev/null +++ b/arch/mips/ralink/rt3883.c @@ -0,0 +1,246 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mipsregs.h> +#include <asm/mach-ralink/ralink_regs.h> +#include <asm/mach-ralink/rt3883.h> + +#include "common.h" + +static struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = RT3883_GPIO_MODE_I2C, + .gpio_first = RT3883_GPIO_I2C_SD, + .gpio_last = RT3883_GPIO_I2C_SCLK, + }, { + .name = "spi", + .mask = RT3883_GPIO_MODE_SPI, + .gpio_first = RT3883_GPIO_SPI_CS0, + .gpio_last = RT3883_GPIO_SPI_MISO, + }, { + .name = "uartlite", + .mask = RT3883_GPIO_MODE_UART1, + .gpio_first = RT3883_GPIO_UART1_TXD, + .gpio_last = RT3883_GPIO_UART1_RXD, + }, { + .name = "jtag", + .mask = RT3883_GPIO_MODE_JTAG, + .gpio_first = RT3883_GPIO_JTAG_TDO, + .gpio_last = RT3883_GPIO_JTAG_TCLK, + }, { + .name = "mdio", + .mask = RT3883_GPIO_MODE_MDIO, + .gpio_first = RT3883_GPIO_MDIO_MDC, + .gpio_last = RT3883_GPIO_MDIO_MDIO, + }, { + .name = "ge1", + .mask = RT3883_GPIO_MODE_GE1, + .gpio_first = RT3883_GPIO_GE1_TXD0, + .gpio_last = RT3883_GPIO_GE1_RXCLK, + }, { + .name = "ge2", + .mask = RT3883_GPIO_MODE_GE2, + .gpio_first = RT3883_GPIO_GE2_TXD0, + .gpio_last = RT3883_GPIO_GE2_RXCLK, + }, { + .name = "pci", + .mask = RT3883_GPIO_MODE_PCI, + .gpio_first = RT3883_GPIO_PCI_AD0, + .gpio_last = RT3883_GPIO_PCI_AD31, + }, { + .name = "lna a", + .mask = RT3883_GPIO_MODE_LNA_A, + .gpio_first = RT3883_GPIO_LNA_PE_A0, + .gpio_last = RT3883_GPIO_LNA_PE_A2, + }, { + .name = "lna g", + .mask = RT3883_GPIO_MODE_LNA_G, + .gpio_first = RT3883_GPIO_LNA_PE_G0, + .gpio_last = RT3883_GPIO_LNA_PE_G2, + }, {0} +}; + +static struct ralink_pinmux_grp uart_mux[] = { + { + .name = "uartf", + .mask = RT3883_GPIO_MODE_UARTF, + .gpio_first = RT3883_GPIO_7, + .gpio_last = RT3883_GPIO_14, + }, { + .name = "pcm uartf", + .mask = RT3883_GPIO_MODE_PCM_UARTF, + .gpio_first = RT3883_GPIO_7, + .gpio_last = RT3883_GPIO_14, + }, { + .name = "pcm i2s", + .mask = RT3883_GPIO_MODE_PCM_I2S, + .gpio_first = RT3883_GPIO_7, + .gpio_last = RT3883_GPIO_14, + }, { + .name = "i2s uartf", + .mask = RT3883_GPIO_MODE_I2S_UARTF, + .gpio_first = RT3883_GPIO_7, + .gpio_last = RT3883_GPIO_14, + }, { + .name = "pcm gpio", + .mask = RT3883_GPIO_MODE_PCM_GPIO, + .gpio_first = RT3883_GPIO_11, + .gpio_last = RT3883_GPIO_14, + }, { + .name = "gpio uartf", + .mask = RT3883_GPIO_MODE_GPIO_UARTF, + .gpio_first = RT3883_GPIO_7, + .gpio_last = RT3883_GPIO_10, + }, { + .name = "gpio i2s", + .mask = RT3883_GPIO_MODE_GPIO_I2S, + .gpio_first = RT3883_GPIO_7, + .gpio_last = RT3883_GPIO_10, + }, { + .name = "gpio", + .mask = RT3883_GPIO_MODE_GPIO, + }, {0} +}; + +static struct ralink_pinmux_grp pci_mux[] = { + { + .name = "pci-dev", + .mask = 0, + .gpio_first = RT3883_GPIO_PCI_AD0, + .gpio_last = RT3883_GPIO_PCI_AD31, + }, { + .name = "pci-host2", + .mask = 1, + .gpio_first = RT3883_GPIO_PCI_AD0, + .gpio_last = RT3883_GPIO_PCI_AD31, + }, { + .name = "pci-host1", + .mask = 2, + .gpio_first = RT3883_GPIO_PCI_AD0, + .gpio_last = RT3883_GPIO_PCI_AD31, + }, { + .name = "pci-fnc", + .mask = 3, + .gpio_first = RT3883_GPIO_PCI_AD0, + .gpio_last = RT3883_GPIO_PCI_AD31, + }, { + .name = "pci-gpio", + .mask = 7, + .gpio_first = RT3883_GPIO_PCI_AD0, + .gpio_last = RT3883_GPIO_PCI_AD31, + }, {0} +}; + +static void rt3883_wdt_reset(void) +{ + u32 t; + + /* enable WDT reset output on GPIO 2 */ + t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1); + t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT; + rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1); +} + +struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .uart = uart_mux, + .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT, + .uart_mask = RT3883_GPIO_MODE_UART0_MASK, + .wdt_reset = rt3883_wdt_reset, + .pci = pci_mux, + .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT, + .pci_mask = RT3883_GPIO_MODE_PCI_MASK, +}; + +void __init ralink_clk_init(void) +{ + unsigned long cpu_rate, sys_rate; + u32 syscfg0; + u32 clksel; + u32 ddr2; + + syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0); + clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) & + RT3883_SYSCFG0_CPUCLK_MASK); + ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2; + + switch (clksel) { + case RT3883_SYSCFG0_CPUCLK_250: + cpu_rate = 250000000; + sys_rate = (ddr2) ? 125000000 : 83000000; + break; + case RT3883_SYSCFG0_CPUCLK_384: + cpu_rate = 384000000; + sys_rate = (ddr2) ? 128000000 : 96000000; + break; + case RT3883_SYSCFG0_CPUCLK_480: + cpu_rate = 480000000; + sys_rate = (ddr2) ? 160000000 : 120000000; + break; + case RT3883_SYSCFG0_CPUCLK_500: + cpu_rate = 500000000; + sys_rate = (ddr2) ? 166000000 : 125000000; + break; + } + + ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("10000100.timer", sys_rate); + ralink_clk_add("10000120.watchdog", sys_rate); + ralink_clk_add("10000500.uart", 40000000); + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000c00.uartlite", 40000000); + ralink_clk_add("10100000.ethernet", sys_rate); +} + +void __init ralink_of_remap(void) +{ + rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc"); + rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc"); + + if (!rt_sysc_membase || !rt_memc_membase) + panic("Failed to remap core resources"); +} + +void prom_soc_init(struct ralink_soc_info *soc_info) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE); + const char *name; + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3); + n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7); + id = __raw_readl(sysc + RT3883_SYSC_REG_REVID); + + if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) { + soc_info->compatible = "ralink,rt3883-soc"; + name = "RT3883"; + } else { + panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1); + } + + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s ver:%u eco:%u", + name, + (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK, + (id & RT3883_REVID_ECO_ID_MASK)); + + soc_info->mem_base = RT3883_SDRAM_BASE; + soc_info->mem_size_min = RT3883_MEM_SIZE_MIN; + soc_info->mem_size_max = RT3883_MEM_SIZE_MAX; +} diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index fff58ac1..2e21b76 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -69,7 +69,7 @@ static void rt_set_mode(enum clock_event_mode mode, /* Nothing to do ... */ } -int rt_timer_irq; +unsigned int rt_timer_irq; static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); static DEFINE_PER_CPU(char [11], hub_rt_name); |