diff options
Diffstat (limited to 'arch/powerpc/boot')
28 files changed, 411 insertions, 126 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 63d07cc..1aded8f 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -35,10 +35,10 @@ endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt -$(obj)/4xx.o: BOOTCFLAGS += -mcpu=440 -$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 -$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 -$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 +$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 +$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 @@ -186,7 +186,7 @@ quiet_cmd_wrap = WRAP $@ image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries -image-$(CONFIG_PPC_PS3) += zImage-dtb.ps3 +image-$(CONFIG_PPC_PS3) += dtbImage.ps3 image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp @@ -205,7 +205,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # # Board ports in arch/powerpc/platform/40x/Kconfig -image-$(CONFIG_EP405) += zImage-dtb.ep405 +image-$(CONFIG_EP405) += dtbImage.ep405 image-$(CONFIG_WALNUT) += treeImage.walnut # Board ports in arch/powerpc/platform/44x/Kconfig @@ -220,9 +220,9 @@ image-$(CONFIG_WARP) += cuImage.warp # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads -image-$(CONFIG_PPC_EP88XC) += zImage-dtb.ep88xc +image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ - zImage-dtb.adder875-redboot + dtbImage.adder875-redboot # Board ports in arch/powerpc/platform/52xx/Kconfig image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b @@ -230,7 +230,7 @@ image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b # Board ports in arch/powerpc/platform/82xx/Kconfig image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads image-$(CONFIG_PQ2FADS) += cuImage.pq2fads -image-$(CONFIG_EP8248E) += zImage-dtb.ep8248e +image-$(CONFIG_EP8248E) += dtbImage.ep8248e # Board ports in arch/powerpc/platform/83xx/Kconfig image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds @@ -253,8 +253,8 @@ image-$(CONFIG_TQM8540) += cuImage.tqm8540 image-$(CONFIG_TQM8541) += cuImage.tqm8541 image-$(CONFIG_TQM8555) += cuImage.tqm8555 image-$(CONFIG_TQM8560) += cuImage.tqm8560 -image-$(CONFIG_SBC8548) += cuImage.tqm8548 -image-$(CONFIG_SBC8560) += cuImage.tqm8560 +image-$(CONFIG_SBC8548) += cuImage.sbc8548 +image-$(CONFIG_SBC8560) += cuImage.sbc8560 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig image-$(CONFIG_STORCENTER) += cuImage.storcenter @@ -268,7 +268,8 @@ endif initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-)) initrd-y := $(patsubst zImage%, zImage.initrd%, \ - $(patsubst treeImage%, treeImage.initrd%, $(image-y))) + $(patsubst dtbImage%, dtbImage.initrd%, \ + $(patsubst treeImage%, treeImage.initrd%, $(image-y)))) initrd-y := $(filter-out $(image-y), $(initrd-y)) targets += $(image-y) $(initrd-y) @@ -283,10 +284,11 @@ $(obj)/zImage.initrd.%: vmlinux $(wrapperbits) $(obj)/zImage.%: vmlinux $(wrapperbits) $(call if_changed,wrap,$*) -$(obj)/zImage-dtb.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts +# dtbImage% - a dtbImage is a zImage with an embedded device tree blob +$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) -$(obj)/zImage-dtb.%: vmlinux $(wrapperbits) $(dtstree)/%.dts +$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts $(call if_changed,wrap,$*,$(dtstree)/$*.dts) # This cannot be in the root of $(src) as the zImage rule always adds a $(obj) diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c index 900c7ff..b5c30f7 100644 --- a/arch/powerpc/boot/cuboot-bamboo.c +++ b/arch/powerpc/boot/cuboot-bamboo.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c index c5f37ce..56564ba 100644 --- a/arch/powerpc/boot/cuboot-ebony.c +++ b/arch/powerpc/boot/cuboot-ebony.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c index c021167..5434d70 100644 --- a/arch/powerpc/boot/cuboot-katmai.c +++ b/arch/powerpc/boot/cuboot-katmai.c @@ -22,6 +22,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c index f66455a..b55b804 100644 --- a/arch/powerpc/boot/cuboot-taishan.c +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -21,7 +21,9 @@ #include "dcr.h" #include "4xx.h" +#define TARGET_4xx #define TARGET_44x +#define TARGET_440GX #include "ppcboot.h" static bd_t bd; diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index bdedebe..3db93e8 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -11,6 +11,7 @@ #include "4xx.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts index 29f1a6f..7dc37c9 100644 --- a/arch/powerpc/boot/dts/bamboo.dts +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -185,7 +185,6 @@ }; IIC0: i2c@ef600700 { - device_type = "i2c"; compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; reg = <ef600700 14>; interrupt-parent = <&UIC0>; @@ -193,7 +192,6 @@ }; IIC1: i2c@ef600800 { - device_type = "i2c"; compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; reg = <ef600800 14>; interrupt-parent = <&UIC0>; @@ -201,7 +199,6 @@ }; ZMII0: emac-zmii@ef600d00 { - device_type = "zmii-interface"; compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; reg = <ef600d00 c>; }; diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 30737ea..c6ca631 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -212,13 +212,30 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; @@ -231,4 +248,22 @@ reg = <8000 4000>; }; }; + + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 2000000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 2000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 7aad135..0b000cb 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -216,7 +216,6 @@ IIC0: i2c@40000400 { /* FIXME */ - device_type = "i2c"; compatible = "ibm,iic-440gp", "ibm,iic"; reg = <40000400 14>; interrupt-parent = <&UIC0>; @@ -224,7 +223,6 @@ }; IIC1: i2c@40000500 { /* FIXME */ - device_type = "i2c"; compatible = "ibm,iic-440gp", "ibm,iic"; reg = <40000500 14>; interrupt-parent = <&UIC0>; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index 5dd3d15..ae68fef 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -235,7 +235,7 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex"; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; port = <0>; /* port number */ reg = <a0000000 20000000 /* Config space access */ diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 9bdfc0f..fc86e5a 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -38,8 +38,8 @@ timebase-frequency = <0>; /* Filled in by zImage */ i-cache-line-size = <20>; d-cache-line-size = <20>; - i-cache-size = <20000>; - d-cache-size = <20000>; + i-cache-size = <8000>; + d-cache-size = <8000>; dcr-controller; dcr-access-method = "native"; }; @@ -136,11 +136,11 @@ }; POB0: opb { - compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 4 e0000000 20000000>; - clock-frequency = <0>; /* Filled in by zImage */ + ranges = <00000000 4 e0000000 20000000>; + clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; @@ -153,41 +153,40 @@ }; UART0: serial@10000200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000200 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000200 8>; virtual-reg = <a0000200>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; - interrupt-parent = <&UIC0>; - interrupts = <0 4>; - }; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; UART1: serial@10000300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000300 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000300 8>; virtual-reg = <a0000300>; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <1 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; UART2: serial@10000600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000600 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000600 8>; virtual-reg = <a0000600>; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC1>; - interrupts = <5 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <5 4>; + }; IIC0: i2c@10000400 { - device_type = "i2c"; compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; reg = <10000400 14>; interrupt-parent = <&UIC0>; @@ -195,7 +194,6 @@ }; IIC1: i2c@10000500 { - device_type = "i2c"; compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; reg = <10000500 14>; interrupt-parent = <&UIC0>; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 67c7ea1..8baef61 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -182,7 +182,6 @@ }; IIC0: i2c@ef600400 { - device_type = "i2c"; compatible = "ibm,iic-405ex", "ibm,iic"; reg = <ef600400 14>; interrupt-parent = <&UIC0>; @@ -190,7 +189,6 @@ }; IIC1: i2c@ef600500 { - device_type = "i2c"; compatible = "ibm,iic-405ex", "ibm,iic"; reg = <ef600500 14>; interrupt-parent = <&UIC0>; @@ -199,7 +197,6 @@ RGMII0: emac-rgmii@ef600b00 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = <ef600b00 104>; has-mdio; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 0d701c1..09b4e16 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -258,6 +258,21 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0:ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; }; ata@3a00 { diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 571ba02..2e9bc39 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -270,7 +270,7 @@ mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio"; + compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; reg = <3000 400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index bdd70e4..710c011 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -182,7 +182,6 @@ }; IIC0: i2c@ef600400 { - device_type = "i2c"; compatible = "ibm,iic-405ex", "ibm,iic"; reg = <ef600400 14>; interrupt-parent = <&UIC0>; @@ -190,7 +189,6 @@ }; IIC1: i2c@ef600500 { - device_type = "i2c"; compatible = "ibm,iic-405ex", "ibm,iic"; reg = <ef600500 14>; interrupt-parent = <&UIC0>; @@ -199,7 +197,6 @@ RGMII0: emac-rgmii@ef600b00 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = <ef600b00 104>; has-mdio; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 76951ab..2b0dde0 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -148,7 +148,6 @@ interrupt-parent = <&mpc5200_pic>; }; - spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <f00 20>; @@ -209,10 +208,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@2 { + device_type = "ethernet-phy"; + reg = <2>; + }; }; ata@3a00 { @@ -223,11 +237,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <68>; + }; }; sram@8000 { @@ -240,7 +262,8 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 50000000 00010000 + ranges = <0 0 ff000000 01000000 + 1 0 50000000 00010000 2 0 50010000 00010000 3 0 50020000 00010000>; @@ -271,31 +294,15 @@ compatible = "promess,pro_module_dio"; reg = <3 800 2>; }; - }; - pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <f0000d00 100>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot - c000 0 0 2 &mpc5200_pic 1 1 3 - c000 0 0 3 &mpc5200_pic 1 2 3 - c000 0 0 4 &mpc5200_pic 1 3 3 - - c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot - c800 0 0 2 &mpc5200_pic 1 2 3 - c800 0 0 3 &mpc5200_pic 1 3 3 - c800 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index a3637ff..eac8e1b 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -91,7 +157,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +164,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { @@ -189,14 +255,14 @@ }; sata@18000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; }; sata@19000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 440aa4d..5bc09ad 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 533e9b0..1d6ea08 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -91,7 +157,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +164,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 9271153..711f9a3 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index c270685..6f78a9f 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -91,7 +157,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +164,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { @@ -189,28 +255,28 @@ }; sata@18000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; }; sata@19000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; }; sata@1a000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x1a000 0x1000>; interrupts = <46 0x8>; interrupt-parent = <&ipic>; }; sata@1b000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x1b000 0x1000>; interrupts = <47 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 0dda2fc..c11ceb7 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts index d3c2ac3..f947c75 100644 --- a/arch/powerpc/boot/dts/rainier.dts +++ b/arch/powerpc/boot/dts/rainier.dts @@ -229,7 +229,6 @@ }; IIC0: i2c@ef600700 { - device_type = "i2c"; compatible = "ibm,iic-440grx", "ibm,iic"; reg = <ef600700 14>; interrupt-parent = <&UIC0>; @@ -237,7 +236,6 @@ }; IIC1: i2c@ef600800 { - device_type = "i2c"; compatible = "ibm,iic-440grx", "ibm,iic"; reg = <ef600800 14>; interrupt-parent = <&UIC0>; @@ -245,13 +243,11 @@ }; ZMII0: emac-zmii@ef600d00 { - device_type = "zmii-interface"; compatible = "ibm,zmii-440grx", "ibm,zmii"; reg = <ef600d00 c>; }; RGMII0: emac-rgmii@ef601000 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii-440grx", "ibm,rgmii"; reg = <ef601000 8>; has-mdio; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 14be38a..b86e65d 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -184,11 +184,17 @@ cell-index = <0>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < - /* IDSEL 0x01 (PCI-X slot) */ - 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>; + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; interrupts = <0x18 0x2>; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 5c13d46..8db9515 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -244,7 +244,6 @@ }; IIC0: i2c@ef600700 { - device_type = "i2c"; compatible = "ibm,iic-440epx", "ibm,iic"; reg = <ef600700 14>; interrupt-parent = <&UIC0>; @@ -252,7 +251,6 @@ }; IIC1: i2c@ef600800 { - device_type = "i2c"; compatible = "ibm,iic-440epx", "ibm,iic"; reg = <ef600800 14>; interrupt-parent = <&UIC0>; @@ -260,13 +258,11 @@ }; ZMII0: emac-zmii@ef600d00 { - device_type = "zmii-interface"; compatible = "ibm,zmii-440epx", "ibm,zmii"; reg = <ef600d00 c>; }; RGMII0: emac-rgmii@ef601000 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii-440epx", "ibm,rgmii"; reg = <ef601000 8>; has-mdio; diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts index 0706a4a..8278068 100644 --- a/arch/powerpc/boot/dts/taishan.dts +++ b/arch/powerpc/boot/dts/taishan.dts @@ -203,7 +203,6 @@ IIC0: i2c@40000400 { /* FIXME */ - device_type = "i2c"; compatible = "ibm,iic-440gp", "ibm,iic"; reg = <40000400 14>; interrupt-parent = <&UIC0>; @@ -211,7 +210,6 @@ }; IIC1: i2c@40000500 { /* FIXME */ - device_type = "i2c"; compatible = "ibm,iic-440gp", "ibm,iic"; reg = <40000500 14>; interrupt-parent = <&UIC0>; @@ -225,13 +223,11 @@ }; ZMII0: emac-zmii@40000780 { - device_type = "zgmii-interface"; compatible = "ibm,zmii-440gx", "ibm,zmii"; reg = <40000780 c>; }; RGMII0: emac-rgmii@40000790 { - device_type = "rgmii-interface"; compatible = "ibm,rgmii"; reg = <40000790 8>; }; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index c86464f..65bcea6 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -127,10 +127,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; ata@3a00 { @@ -141,11 +156,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1307"; + reg = <68>; + }; }; sram@8000 { @@ -154,6 +177,23 @@ }; }; + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + pci@f0000d00 { #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index c317815..8f8b849 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -174,10 +174,10 @@ cuboot*) *-mpc83*) platformo=$object/cuboot-83xx.o ;; - *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555*) + *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555) platformo=$object/cuboot-85xx-cpm2.o ;; - *-mpc85*) + *-mpc85*|*-tqm8540|*-sbc85*) platformo=$object/cuboot-85xx.o ;; esac @@ -191,10 +191,14 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; -ep88xc|ep405|redboot*|ep8248e) +ep88xc|ep405|ep8248e) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; +adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" |