summaryrefslogtreecommitdiff
path: root/arch/x86/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/include')
-rw-r--r--arch/x86/include/asm/cpufeature.h2
-rw-r--r--arch/x86/include/asm/iommu.h1
-rw-r--r--arch/x86/include/asm/nmi.h14
-rw-r--r--arch/x86/include/asm/pgtable-3level.h30
-rw-r--r--arch/x86/include/asm/uaccess.h12
-rw-r--r--arch/x86/include/asm/uv/uv_bau.h1
6 files changed, 38 insertions, 22 deletions
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 340ee49..f91e80f 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -176,7 +176,7 @@
#define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
-#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */
#define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */
/* Virtualization flags: Linux defined, word 8 */
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
index dffc38e..345c99c 100644
--- a/arch/x86/include/asm/iommu.h
+++ b/arch/x86/include/asm/iommu.h
@@ -5,7 +5,6 @@ extern struct dma_map_ops nommu_dma_ops;
extern int force_iommu, no_iommu;
extern int iommu_detected;
extern int iommu_pass_through;
-extern int iommu_group_mf;
/* 10 seconds */
#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index 0e3793b..dc580c4 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -54,6 +54,20 @@ struct nmiaction {
__register_nmi_handler((t), &fn##_na); \
})
+/*
+ * For special handlers that register/unregister in the
+ * init section only. This should be considered rare.
+ */
+#define register_nmi_handler_initonly(t, fn, fg, n) \
+({ \
+ static struct nmiaction fn##_na __initdata = { \
+ .handler = (fn), \
+ .name = (n), \
+ .flags = (fg), \
+ }; \
+ __register_nmi_handler((t), &fn##_na); \
+})
+
int __register_nmi_handler(unsigned int, struct nmiaction *);
void unregister_nmi_handler(unsigned int, const char *);
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 43876f1..cb00ccc 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -47,16 +47,26 @@ static inline void native_set_pte(pte_t *ptep, pte_t pte)
* they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
* operations.
*
- * Without THP if the mmap_sem is hold for reading, the
- * pmd can only transition from null to not null while pmd_read_atomic runs.
- * So there's no need of literally reading it atomically.
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
*
* With THP if the mmap_sem is hold for reading, the pmd can become
- * THP or null or point to a pte (and in turn become "stable") at any
- * time under pmd_read_atomic, so it's mandatory to read it atomically
- * with cmpxchg8b.
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
*/
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
{
pmdval_t ret;
@@ -74,12 +84,6 @@ static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
return (pmd_t) { ret };
}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
-{
- return (pmd_t) { atomic64_read((atomic64_t *)pmdp) };
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
{
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 04cd688..e1f3a17 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -33,9 +33,8 @@
#define segment_eq(a, b) ((a).seg == (b).seg)
#define user_addr_max() (current_thread_info()->addr_limit.seg)
-#define __addr_ok(addr) \
- ((unsigned long __force)(addr) < \
- (current_thread_info()->addr_limit.seg))
+#define __addr_ok(addr) \
+ ((unsigned long __force)(addr) < user_addr_max())
/*
* Test whether a block of memory is a valid user space address.
@@ -47,14 +46,14 @@
* This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
*/
-#define __range_not_ok(addr, size) \
+#define __range_not_ok(addr, size, limit) \
({ \
unsigned long flag, roksum; \
__chk_user_ptr(addr); \
asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0" \
: "=&r" (flag), "=r" (roksum) \
: "1" (addr), "g" ((long)(size)), \
- "rm" (current_thread_info()->addr_limit.seg)); \
+ "rm" (limit)); \
flag; \
})
@@ -77,7 +76,8 @@
* checks that the pointer is in the user space range - after calling
* this function, memory access functions may still return -EFAULT.
*/
-#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
+#define access_ok(type, addr, size) \
+ (likely(__range_not_ok(addr, size, user_addr_max()) == 0))
/*
* The exception table consists of pairs of addresses relative to the
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index becf47b..6149b47 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -149,7 +149,6 @@
/* 4 bits of software ack period */
#define UV2_ACK_MASK 0x7UL
#define UV2_ACK_UNITS_SHFT 3
-#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
/*