diff options
Diffstat (limited to 'arch/x86/mm')
-rw-r--r-- | arch/x86/mm/Makefile_32 | 2 | ||||
-rw-r--r-- | arch/x86/mm/Makefile_64 | 2 | ||||
-rw-r--r-- | arch/x86/mm/fault.c (renamed from arch/x86/mm/fault_64.c) | 21 | ||||
-rw-r--r-- | arch/x86/mm/fault_32.c | 949 |
4 files changed, 14 insertions, 960 deletions
diff --git a/arch/x86/mm/Makefile_32 b/arch/x86/mm/Makefile_32 index ffa6d46..c36ae88 100644 --- a/arch/x86/mm/Makefile_32 +++ b/arch/x86/mm/Makefile_32 @@ -2,7 +2,7 @@ # Makefile for the linux i386-specific parts of the memory manager. # -obj-y := init_32.o pgtable_32.o fault_32.o ioremap.o extable.o pageattr.o mmap.o +obj-y := init_32.o pgtable_32.o fault.o ioremap.o extable.o pageattr.o mmap.o obj-$(CONFIG_NUMA) += discontig_32.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o diff --git a/arch/x86/mm/Makefile_64 b/arch/x86/mm/Makefile_64 index 27a090c..688c8c2 100644 --- a/arch/x86/mm/Makefile_64 +++ b/arch/x86/mm/Makefile_64 @@ -2,7 +2,7 @@ # Makefile for the linux x86_64-specific parts of the memory manager. # -obj-y := init_64.o fault_64.o ioremap.o extable.o pageattr.o mmap.o +obj-y := init_64.o fault.o ioremap.o extable.o pageattr.o mmap.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_NUMA) += numa_64.o obj-$(CONFIG_K8_NUMA) += k8topology_64.o diff --git a/arch/x86/mm/fault_64.c b/arch/x86/mm/fault.c index 0902719..14a0c6e 100644 --- a/arch/x86/mm/fault_64.c +++ b/arch/x86/mm/fault.c @@ -18,6 +18,8 @@ #include <linux/tty.h> #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/compiler.h> +#include <linux/highmem.h> +#include <linux/bootmem.h> /* for max_low_pfn */ #include <linux/vmalloc.h> #include <linux/module.h> #include <linux/kprobes.h> @@ -25,6 +27,8 @@ #include <linux/kdebug.h> #include <asm/system.h> +#include <asm/desc.h> +#include <asm/segment.h> #include <asm/pgalloc.h> #include <asm/smp.h> #include <asm/tlbflush.h> @@ -88,16 +92,15 @@ static int is_prefetch(struct pt_regs *regs, unsigned long addr, unsigned char *max_instr; #ifdef CONFIG_X86_32 - if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 >= 6)) { - /* Catch an obscure case of prefetch inside an NX page. */ - if (nx_enabled && (error_code & PF_INSTR)) - return 0; - } else { +# ifdef CONFIG_X86_PAE + /* If it was a exec fault on NX page, ignore */ + if (nx_enabled && (error_code & PF_INSTR)) return 0; - } -#else - /* If it was a exec fault ignore */ +# else + return 0; +# endif +#else /* CONFIG_X86_64 */ + /* If it was a exec fault on NX page, ignore */ if (error_code & PF_INSTR) return 0; #endif diff --git a/arch/x86/mm/fault_32.c b/arch/x86/mm/fault_32.c deleted file mode 100644 index 4da4625..0000000 --- a/arch/x86/mm/fault_32.c +++ /dev/null @@ -1,949 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - */ - -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/vt_kern.h> /* For unblank_screen() */ -#include <linux/highmem.h> -#include <linux/bootmem.h> /* for max_low_pfn */ -#include <linux/vmalloc.h> -#include <linux/module.h> -#include <linux/kprobes.h> -#include <linux/uaccess.h> -#include <linux/kdebug.h> - -#include <asm/system.h> -#include <asm/desc.h> -#include <asm/segment.h> - -/* - * Page fault error code bits - * bit 0 == 0 means no page found, 1 means protection fault - * bit 1 == 0 means read, 1 means write - * bit 2 == 0 means kernel, 1 means user-mode - * bit 3 == 1 means use of reserved bit detected - * bit 4 == 1 means fault was an instruction fetch - */ -#define PF_PROT (1<<0) -#define PF_WRITE (1<<1) -#define PF_USER (1<<2) -#define PF_RSVD (1<<3) -#define PF_INSTR (1<<4) - -static inline int notify_page_fault(struct pt_regs *regs) -{ -#ifdef CONFIG_KPROBES - int ret = 0; - - /* kprobe_running() needs smp_processor_id() */ -#ifdef CONFIG_X86_32 - if (!user_mode_vm(regs)) { -#else - if (!user_mode(regs)) { -#endif - preempt_disable(); - if (kprobe_running() && kprobe_fault_handler(regs, 14)) - ret = 1; - preempt_enable(); - } - - return ret; -#else - return 0; -#endif -} - -/* - * X86_32 - * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch. - * Check that here and ignore it. - * - * X86_64 - * Sometimes the CPU reports invalid exceptions on prefetch. - * Check that here and ignore it. - * - * Opcode checker based on code by Richard Brunner - */ -static int is_prefetch(struct pt_regs *regs, unsigned long addr, - unsigned long error_code) -{ - unsigned char *instr; - int scan_more = 1; - int prefetch = 0; - unsigned char *max_instr; - -#ifdef CONFIG_X86_32 - if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 >= 6)) { - /* Catch an obscure case of prefetch inside an NX page. */ - if (nx_enabled && (error_code & PF_INSTR)) - return 0; - } else { - return 0; - } -#else - /* If it was a exec fault ignore */ - if (error_code & PF_INSTR) - return 0; -#endif - - instr = (unsigned char *)convert_ip_to_linear(current, regs); - max_instr = instr + 15; - - if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE) - return 0; - - while (scan_more && instr < max_instr) { - unsigned char opcode; - unsigned char instr_hi; - unsigned char instr_lo; - - if (probe_kernel_address(instr, opcode)) - break; - - instr_hi = opcode & 0xf0; - instr_lo = opcode & 0x0f; - instr++; - - switch (instr_hi) { - case 0x20: - case 0x30: - /* - * Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes. - * In X86_64 long mode, the CPU will signal invalid - * opcode if some of these prefixes are present so - * X86_64 will never get here anyway - */ - scan_more = ((instr_lo & 7) == 0x6); - break; -#ifdef CONFIG_X86_64 - case 0x40: - /* - * In AMD64 long mode 0x40..0x4F are valid REX prefixes - * Need to figure out under what instruction mode the - * instruction was issued. Could check the LDT for lm, - * but for now it's good enough to assume that long - * mode only uses well known segments or kernel. - */ - scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS); - break; -#endif - case 0x60: - /* 0x64 thru 0x67 are valid prefixes in all modes. */ - scan_more = (instr_lo & 0xC) == 0x4; - break; - case 0xF0: - /* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */ - scan_more = !instr_lo || (instr_lo>>1) == 1; - break; - case 0x00: - /* Prefetch instruction is 0x0F0D or 0x0F18 */ - scan_more = 0; - - if (probe_kernel_address(instr, opcode)) - break; - prefetch = (instr_lo == 0xF) && - (opcode == 0x0D || opcode == 0x18); - break; - default: - scan_more = 0; - break; - } - } - return prefetch; -} - -static void force_sig_info_fault(int si_signo, int si_code, - unsigned long address, struct task_struct *tsk) -{ - siginfo_t info; - - info.si_signo = si_signo; - info.si_errno = 0; - info.si_code = si_code; - info.si_addr = (void __user *)address; - force_sig_info(si_signo, &info, tsk); -} - -#ifdef CONFIG_X86_64 -static int bad_address(void *p) -{ - unsigned long dummy; - return probe_kernel_address((unsigned long *)p, dummy); -} -#endif - -void dump_pagetable(unsigned long address) -{ -#ifdef CONFIG_X86_32 - __typeof__(pte_val(__pte(0))) page; - - page = read_cr3(); - page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT]; -#ifdef CONFIG_X86_PAE - printk("*pdpt = %016Lx ", page); - if ((page >> PAGE_SHIFT) < max_low_pfn - && page & _PAGE_PRESENT) { - page &= PAGE_MASK; - page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT) - & (PTRS_PER_PMD - 1)]; - printk(KERN_CONT "*pde = %016Lx ", page); - page &= ~_PAGE_NX; - } -#else - printk("*pde = %08lx ", page); -#endif - - /* - * We must not directly access the pte in the highpte - * case if the page table is located in highmem. - * And let's rather not kmap-atomic the pte, just in case - * it's allocated already. - */ - if ((page >> PAGE_SHIFT) < max_low_pfn - && (page & _PAGE_PRESENT) - && !(page & _PAGE_PSE)) { - page &= PAGE_MASK; - page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT) - & (PTRS_PER_PTE - 1)]; - printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page); - } - - printk("\n"); -#else /* CONFIG_X86_64 */ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - - pgd = (pgd_t *)read_cr3(); - - pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK); - pgd += pgd_index(address); - if (bad_address(pgd)) goto bad; - printk("PGD %lx ", pgd_val(*pgd)); - if (!pgd_present(*pgd)) goto ret; - - pud = pud_offset(pgd, address); - if (bad_address(pud)) goto bad; - printk("PUD %lx ", pud_val(*pud)); - if (!pud_present(*pud)) goto ret; - - pmd = pmd_offset(pud, address); - if (bad_address(pmd)) goto bad; - printk("PMD %lx ", pmd_val(*pmd)); - if (!pmd_present(*pmd) || pmd_large(*pmd)) goto ret; - - pte = pte_offset_kernel(pmd, address); - if (bad_address(pte)) goto bad; - printk("PTE %lx", pte_val(*pte)); -ret: - printk("\n"); - return; -bad: - printk("BAD\n"); -#endif -} - -#ifdef CONFIG_X86_32 -static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) -{ - unsigned index = pgd_index(address); - pgd_t *pgd_k; - pud_t *pud, *pud_k; - pmd_t *pmd, *pmd_k; - - pgd += index; - pgd_k = init_mm.pgd + index; - - if (!pgd_present(*pgd_k)) - return NULL; - - /* - * set_pgd(pgd, *pgd_k); here would be useless on PAE - * and redundant with the set_pmd() on non-PAE. As would - * set_pud. - */ - - pud = pud_offset(pgd, address); - pud_k = pud_offset(pgd_k, address); - if (!pud_present(*pud_k)) - return NULL; - - pmd = pmd_offset(pud, address); - pmd_k = pmd_offset(pud_k, address); - if (!pmd_present(*pmd_k)) - return NULL; - if (!pmd_present(*pmd)) { - set_pmd(pmd, *pmd_k); - arch_flush_lazy_mmu_mode(); - } else - BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k)); - return pmd_k; -} -#endif - -#ifdef CONFIG_X86_64 -static const char errata93_warning[] = -KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n" -KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n" -KERN_ERR "******* Please consider a BIOS update.\n" -KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n"; -#endif - -/* Workaround for K8 erratum #93 & buggy BIOS. - BIOS SMM functions are required to use a specific workaround - to avoid corruption of the 64bit RIP register on C stepping K8. - A lot of BIOS that didn't get tested properly miss this. - The OS sees this as a page fault with the upper 32bits of RIP cleared. - Try to work around it here. - Note we only handle faults in kernel here. - Does nothing for X86_32 - */ -static int is_errata93(struct pt_regs *regs, unsigned long address) -{ -#ifdef CONFIG_X86_64 - static int warned; - if (address != regs->ip) - return 0; - if ((address >> 32) != 0) - return 0; - address |= 0xffffffffUL << 32; - if ((address >= (u64)_stext && address <= (u64)_etext) || - (address >= MODULES_VADDR && address <= MODULES_END)) { - if (!warned) { - printk(errata93_warning); - warned = 1; - } - regs->ip = address; - return 1; - } -#endif - return 0; -} - -/* - * Work around K8 erratum #100 K8 in compat mode occasionally jumps to illegal - * addresses >4GB. We catch this in the page fault handler because these - * addresses are not reachable. Just detect this case and return. Any code - * segment in LDT is compatibility mode. - */ -static int is_errata100(struct pt_regs *regs, unsigned long address) -{ -#ifdef CONFIG_X86_64 - if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) && - (address >> 32)) - return 1; -#endif - return 0; -} - -void do_invalid_op(struct pt_regs *, unsigned long); - -static int is_f00f_bug(struct pt_regs *regs, unsigned long address) -{ -#ifdef CONFIG_X86_F00F_BUG - unsigned long nr; - /* - * Pentium F0 0F C7 C8 bug workaround. - */ - if (boot_cpu_data.f00f_bug) { - nr = (address - idt_descr.address) >> 3; - - if (nr == 6) { - do_invalid_op(regs, 0); - return 1; - } - } -#endif - return 0; -} - -static void show_fault_oops(struct pt_regs *regs, unsigned long error_code, - unsigned long address) -{ -#ifdef CONFIG_X86_32 - if (!oops_may_print()) - return; - -#ifdef CONFIG_X86_PAE - if (error_code & PF_INSTR) { - int level; - pte_t *pte = lookup_address(address, &level); - - if (pte && pte_present(*pte) && !pte_exec(*pte)) - printk(KERN_CRIT "kernel tried to execute " - "NX-protected page - exploit attempt? " - "(uid: %d)\n", current->uid); - } -#endif - printk(KERN_ALERT "BUG: unable to handle kernel "); - if (address < PAGE_SIZE) - printk(KERN_CONT "NULL pointer dereference"); - else - printk(KERN_CONT "paging request"); - printk(KERN_CONT " at %08lx\n", address); - - printk(KERN_ALERT "IP:"); - printk_address(regs->ip, 1); - dump_pagetable(address); -#else /* CONFIG_X86_64 */ - printk(KERN_ALERT "BUG: unable to handle kernel "); - if (address < PAGE_SIZE) - printk(KERN_CONT "NULL pointer dereference"); - else - printk(KERN_CONT "paging request"); - printk(KERN_CONT " at %016lx\n", address); - - printk(KERN_ALERT "IP:"); - printk_address(regs->ip, 1); - dump_pagetable(address); -#endif -} - -#ifdef CONFIG_X86_64 -static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs, - unsigned long error_code) -{ - unsigned long flags = oops_begin(); - struct task_struct *tsk; - - printk(KERN_ALERT "%s: Corrupted page table at address %lx\n", - current->comm, address); - dump_pagetable(address); - tsk = current; - tsk->thread.cr2 = address; - tsk->thread.trap_no = 14; - tsk->thread.error_code = error_code; - if (__die("Bad pagetable", regs, error_code)) - regs = NULL; - oops_end(flags, regs, SIGKILL); -} -#endif - -/* - * X86_32 - * Handle a fault on the vmalloc or module mapping area - * - * X86_64 - * Handle a fault on the vmalloc area - * - * This assumes no large pages in there. - */ -static int vmalloc_fault(unsigned long address) -{ -#ifdef CONFIG_X86_32 - unsigned long pgd_paddr; - pmd_t *pmd_k; - pte_t *pte_k; - /* - * Synchronize this task's top level page-table - * with the 'reference' page table. - * - * Do _not_ use "current" here. We might be inside - * an interrupt in the middle of a task switch.. - */ - pgd_paddr = read_cr3(); - pmd_k = vmalloc_sync_one(__va(pgd_paddr), address); - if (!pmd_k) - return -1; - pte_k = pte_offset_kernel(pmd_k, address); - if (!pte_present(*pte_k)) - return -1; - return 0; -#else - pgd_t *pgd, *pgd_ref; - pud_t *pud, *pud_ref; - pmd_t *pmd, *pmd_ref; - pte_t *pte, *pte_ref; - - /* Copy kernel mappings over when needed. This can also - happen within a race in page table update. In the later - case just flush. */ - - pgd = pgd_offset(current->mm ?: &init_mm, address); - pgd_ref = pgd_offset_k(address); - if (pgd_none(*pgd_ref)) - return -1; - if (pgd_none(*pgd)) - set_pgd(pgd, *pgd_ref); - else - BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref)); - - /* Below here mismatches are bugs because these lower tables - are shared */ - - pud = pud_offset(pgd, address); - pud_ref = pud_offset(pgd_ref, address); - if (pud_none(*pud_ref)) - return -1; - if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref)) - BUG(); - pmd = pmd_offset(pud, address); - pmd_ref = pmd_offset(pud_ref, address); - if (pmd_none(*pmd_ref)) - return -1; - if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref)) - BUG(); - pte_ref = pte_offset_kernel(pmd_ref, address); - if (!pte_present(*pte_ref)) - return -1; - pte = pte_offset_kernel(pmd, address); - /* Don't use pte_page here, because the mappings can point - outside mem_map, and the NUMA hash lookup cannot handle - that. */ - if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref)) - BUG(); - return 0; -#endif -} - -int show_unhandled_signals = 1; - -/* - * This routine handles page faults. It determines the address, - * and the problem, and then passes it off to one of the appropriate - * routines. - */ -#ifdef CONFIG_X86_64 -asmlinkage -#endif -void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) -{ - struct task_struct *tsk; - struct mm_struct *mm; - struct vm_area_struct *vma; - unsigned long address; - int write, si_code; - int fault; -#ifdef CONFIG_X86_64 - unsigned long flags; -#endif - - /* - * We can fault from pretty much anywhere, with unknown IRQ state. - */ - trace_hardirqs_fixup(); - - tsk = current; - mm = tsk->mm; - prefetchw(&mm->mmap_sem); - - /* get the address */ - address = read_cr2(); - - si_code = SEGV_MAPERR; - - if (notify_page_fault(regs)) - return; - - /* - * We fault-in kernel-space virtual memory on-demand. The - * 'reference' page table is init_mm.pgd. - * - * NOTE! We MUST NOT take any locks for this case. We may - * be in an interrupt or a critical region, and should - * only copy the information from the master page table, - * nothing more. - * - * This verifies that the fault happens in kernel space - * (error_code & 4) == 0, and that the fault was not a - * protection error (error_code & 9) == 0. - */ -#ifdef CONFIG_X86_32 - if (unlikely(address >= TASK_SIZE)) { - if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) && - vmalloc_fault(address) >= 0) - return; - /* - * Don't take the mm semaphore here. If we fixup a prefetch - * fault we could otherwise deadlock. - */ - goto bad_area_nosemaphore; - } - - /* It's safe to allow irq's after cr2 has been saved and the vmalloc - fault has been handled. */ - if (regs->flags & (X86_EFLAGS_IF|VM_MASK)) - local_irq_enable(); - - /* - * If we're in an interrupt, have no user context or are running in an - * atomic region then we must not take the fault. - */ - if (in_atomic() || !mm) - goto bad_area_nosemaphore; -#else /* CONFIG_X86_64 */ - if (unlikely(address >= TASK_SIZE64)) { - /* - * Don't check for the module range here: its PML4 - * is always initialized because it's shared with the main - * kernel text. Only vmalloc may need PML4 syncups. - */ - if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) && - ((address >= VMALLOC_START && address < VMALLOC_END))) { - if (vmalloc_fault(address) >= 0) - return; - } - /* - * Don't take the mm semaphore here. If we fixup a prefetch - * fault we could otherwise deadlock. - */ - goto bad_area_nosemaphore; - } - if (likely(regs->flags & X86_EFLAGS_IF)) - local_irq_enable(); - - if (unlikely(error_code & PF_RSVD)) - pgtable_bad(address, regs, error_code); - - /* - * If we're in an interrupt, have no user context or are running in an - * atomic region then we must not take the fault. - */ - if (unlikely(in_atomic() || !mm)) - goto bad_area_nosemaphore; - - /* - * User-mode registers count as a user access even for any - * potential system fault or CPU buglet. - */ - if (user_mode_vm(regs)) - error_code |= PF_USER; -again: -#endif - /* When running in the kernel we expect faults to occur only to - * addresses in user space. All other faults represent errors in the - * kernel and should generate an OOPS. Unfortunately, in the case of an - * erroneous fault occurring in a code path which already holds mmap_sem - * we will deadlock attempting to validate the fault against the - * address space. Luckily the kernel only validly references user - * space from well defined areas of code, which are listed in the - * exceptions table. - * - * As the vast majority of faults will be valid we will only perform - * the source reference check when there is a possibility of a deadlock. - * Attempt to lock the address space, if we cannot we then validate the - * source. If this is invalid we can skip the address space check, - * thus avoiding the deadlock. - */ - if (!down_read_trylock(&mm->mmap_sem)) { - if ((error_code & PF_USER) == 0 && - !search_exception_tables(regs->ip)) - goto bad_area_nosemaphore; - down_read(&mm->mmap_sem); - } - - vma = find_vma(mm, address); - if (!vma) - goto bad_area; -#ifdef CONFIG_X86_32 - if (vma->vm_start <= address) -#else - if (likely(vma->vm_start <= address)) -#endif - goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto bad_area; - if (error_code & PF_USER) { - /* - * Accessing the stack below %sp is always a bug. - * The large cushion allows instructions like enter - * and pusha to work. ("enter $65535,$31" pushes - * 32 pointers and then decrements %sp by 65535.) - */ - if (address + 65536 + 32 * sizeof(unsigned long) < regs->sp) - goto bad_area; - } - if (expand_stack(vma, address)) - goto bad_area; -/* - * Ok, we have a good vm_area for this memory access, so - * we can handle it.. - */ -good_area: - si_code = SEGV_ACCERR; - write = 0; - switch (error_code & (PF_PROT|PF_WRITE)) { - default: /* 3: write, present */ - /* fall through */ - case PF_WRITE: /* write, not present */ - if (!(vma->vm_flags & VM_WRITE)) - goto bad_area; - write++; - break; - case PF_PROT: /* read, present */ - goto bad_area; - case 0: /* read, not present */ - if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) - goto bad_area; - } - -#ifdef CONFIG_X86_32 -survive: -#endif - /* - * If for any reason at all we couldn't handle the fault, - * make sure we exit gracefully rather than endlessly redo - * the fault. - */ - fault = handle_mm_fault(mm, vma, address, write); - if (unlikely(fault & VM_FAULT_ERROR)) { - if (fault & VM_FAULT_OOM) - goto out_of_memory; - else if (fault & VM_FAULT_SIGBUS) - goto do_sigbus; - BUG(); - } - if (fault & VM_FAULT_MAJOR) - tsk->maj_flt++; - else - tsk->min_flt++; - -#ifdef CONFIG_X86_32 - /* - * Did it hit the DOS screen memory VA from vm86 mode? - */ - if (v8086_mode(regs)) { - unsigned long bit = (address - 0xA0000) >> PAGE_SHIFT; - if (bit < 32) - tsk->thread.screen_bitmap |= 1 << bit; - } -#endif - up_read(&mm->mmap_sem); - return; - -/* - * Something tried to access memory that isn't in our memory map.. - * Fix it, but check if it's kernel or user first.. - */ -bad_area: - up_read(&mm->mmap_sem); - -bad_area_nosemaphore: - /* User mode accesses just cause a SIGSEGV */ - if (error_code & PF_USER) { - /* - * It's possible to have interrupts off here. - */ - local_irq_enable(); - - /* - * Valid to do another page fault here because this one came - * from user space. - */ - if (is_prefetch(regs, address, error_code)) - return; - - if (is_errata100(regs, address)) - return; - - if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && - printk_ratelimit()) { - printk( -#ifdef CONFIG_X86_32 - "%s%s[%d]: segfault at %lx ip %08lx sp %08lx error %lx", -#else - "%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx", -#endif - task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, - tsk->comm, task_pid_nr(tsk), address, regs->ip, - regs->sp, error_code); - print_vma_addr(" in ", regs->ip); - printk("\n"); - } - - tsk->thread.cr2 = address; - /* Kernel addresses are always protection faults */ - tsk->thread.error_code = error_code | (address >= TASK_SIZE); - tsk->thread.trap_no = 14; - force_sig_info_fault(SIGSEGV, si_code, address, tsk); - return; - } - - if (is_f00f_bug(regs, address)) - return; - -no_context: - /* Are we prepared to handle this kernel fault? */ - if (fixup_exception(regs)) - return; - - /* - * X86_32 - * Valid to do another page fault here, because if this fault - * had been triggered by is_prefetch fixup_exception would have - * handled it. - * - * X86_64 - * Hall of shame of CPU/BIOS bugs. - */ - if (is_prefetch(regs, address, error_code)) - return; - - if (is_errata93(regs, address)) - return; - -/* - * Oops. The kernel tried to access some bad page. We'll have to - * terminate things with extreme prejudice. - */ -#ifdef CONFIG_X86_32 - bust_spinlocks(1); - - show_fault_oops(regs, error_code, address); - - tsk->thread.cr2 = address; - tsk->thread.trap_no = 14; - tsk->thread.error_code = error_code; - die("Oops", regs, error_code); - bust_spinlocks(0); - do_exit(SIGKILL); -#else /* CONFIG_X86_64 */ - flags = oops_begin(); - - show_fault_oops(regs, error_code, address); - - tsk->thread.cr2 = address; - tsk->thread.trap_no = 14; - tsk->thread.error_code = error_code; - if (__die("Oops", regs, error_code)) - regs = NULL; - /* Executive summary in case the body of the oops scrolled away */ - printk(KERN_EMERG "CR2: %016lx\n", address); - oops_end(flags, regs, SIGKILL); -#endif - -/* - * We ran out of memory, or some other thing happened to us that made - * us unable to handle the page fault gracefully. - */ -out_of_memory: - up_read(&mm->mmap_sem); -#ifdef CONFIG_X86_32 - if (is_global_init(tsk)) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } -#else - if (is_global_init(current)) { - yield(); - goto again; - } -#endif - printk("VM: killing process %s\n", tsk->comm); - if (error_code & PF_USER) - do_group_exit(SIGKILL); - goto no_context; - -do_sigbus: - up_read(&mm->mmap_sem); - - /* Kernel mode? Handle exceptions or die */ - if (!(error_code & PF_USER)) - goto no_context; -#ifdef CONFIG_X86_32 - /* User space => ok to do another page fault */ - if (is_prefetch(regs, address, error_code)) - return; -#endif - tsk->thread.cr2 = address; - tsk->thread.error_code = error_code; - tsk->thread.trap_no = 14; - force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk); -} - -#ifdef CONFIG_X86_64 -DEFINE_SPINLOCK(pgd_lock); -LIST_HEAD(pgd_list); -#endif - -void vmalloc_sync_all(void) -{ -#ifdef CONFIG_X86_32 - /* - * Note that races in the updates of insync and start aren't - * problematic: insync can only get set bits added, and updates to - * start are only improving performance (without affecting correctness - * if undone). - */ - static DECLARE_BITMAP(insync, PTRS_PER_PGD); - static unsigned long start = TASK_SIZE; - unsigned long address; - - if (SHARED_KERNEL_PMD) - return; - - BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK); - for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) { - if (!test_bit(pgd_index(address), insync)) { - unsigned long flags; - struct page *page; - - spin_lock_irqsave(&pgd_lock, flags); - for (page = pgd_list; page; page = - (struct page *)page->index) - if (!vmalloc_sync_one(page_address(page), - address)) { - BUG_ON(page != pgd_list); - break; - } - spin_unlock_irqrestore(&pgd_lock, flags); - if (!page) - set_bit(pgd_index(address), insync); - } - if (address == start && test_bit(pgd_index(address), insync)) - start = address + PGDIR_SIZE; - } -#else /* CONFIG_X86_64 */ - /* - * Note that races in the updates of insync and start aren't - * problematic: insync can only get set bits added, and updates to - * start are only improving performance (without affecting correctness - * if undone). - */ - static DECLARE_BITMAP(insync, PTRS_PER_PGD); - static unsigned long start = VMALLOC_START & PGDIR_MASK; - unsigned long address; - - for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) { - if (!test_bit(pgd_index(address), insync)) { - const pgd_t *pgd_ref = pgd_offset_k(address); - struct page *page; - - if (pgd_none(*pgd_ref)) - continue; - spin_lock(&pgd_lock); - list_for_each_entry(page, &pgd_list, lru) { - pgd_t *pgd; - pgd = (pgd_t *)page_address(page) + pgd_index(address); - if (pgd_none(*pgd)) - set_pgd(pgd, *pgd_ref); - else - BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref)); - } - spin_unlock(&pgd_lock); - set_bit(pgd_index(address), insync); - } - if (address == start) - start = address + PGDIR_SIZE; - } - /* Check that there is no need to do the same for the modules area. */ - BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); - BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == - (__START_KERNEL & PGDIR_MASK))); -#endif -} |