summaryrefslogtreecommitdiff
path: root/arch/x86
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/Kconfig3
-rw-r--r--arch/x86/include/asm/io.h3
-rw-r--r--arch/x86/include/asm/processor.h2
-rw-r--r--arch/x86/kernel/acpi/cstate.c23
-rw-r--r--arch/x86/kernel/process.c23
-rw-r--r--arch/x86/kernel/process_32.c4
-rw-r--r--arch/x86/kernel/process_64.c4
-rw-r--r--arch/x86/pci/acpi.c7
-rw-r--r--arch/x86/pci/ce4100.c2
-rw-r--r--arch/x86/pci/common.c14
-rw-r--r--arch/x86/pci/direct.c6
-rw-r--r--arch/x86/pci/numaq_32.c2
-rw-r--r--arch/x86/pci/olpc.c4
-rw-r--r--arch/x86/pci/pcbios.c2
-rw-r--r--arch/x86/pci/visws.c2
-rw-r--r--arch/x86/platform/mrst/Makefile1
-rw-r--r--arch/x86/platform/mrst/pmu.c817
-rw-r--r--arch/x86/platform/mrst/pmu.h234
-rw-r--r--arch/x86/xen/setup.c3
19 files changed, 1111 insertions, 45 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 153aa6f..6a47bb2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -72,6 +72,7 @@ config X86
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_BPF_JIT if (X86_64 && NET)
select CLKEVT_I8253
+ select ARCH_HAVE_NMI_SAFE_CMPXCHG
config INSTRUCTION_DECODER
def_bool (KPROBES || PERF_EVENTS)
@@ -1905,7 +1906,7 @@ config PCI_BIOS
# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
config PCI_DIRECT
def_bool y
- depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC))
+ depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC || PCI_GOMMCONFIG))
config PCI_MMCONFIG
def_bool y
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index d02804d..d8e8eef 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -40,8 +40,6 @@
#include <linux/compiler.h>
#include <asm/page.h>
-#include <xen/xen.h>
-
#define build_mmio_read(name, size, type, reg, barrier) \
static inline type name(const volatile void __iomem *addr) \
{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \
@@ -334,6 +332,7 @@ extern void fixup_early_ioremap(void);
extern bool is_early_ioremap_ptep(pte_t *ptep);
#ifdef CONFIG_XEN
+#include <xen/xen.h>
struct bio_vec;
extern bool xen_biovec_phys_mergeable(const struct bio_vec *vec1,
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 2193715..0d1171c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -751,8 +751,6 @@ static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
:: "a" (eax), "c" (ecx));
}
-extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx);
-
extern void select_idle_routine(const struct cpuinfo_x86 *c);
extern void init_amd_e400_c1e_mask(void);
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 5812404..f50e7fb 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -149,6 +149,29 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
}
EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
+/*
+ * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
+ * which can obviate IPI to trigger checking of need_resched.
+ * We execute MONITOR against need_resched and enter optimized wait state
+ * through MWAIT. Whenever someone changes need_resched, we would be woken
+ * up from MWAIT (without an IPI).
+ *
+ * New with Core Duo processors, MWAIT can take some hints based on CPU
+ * capability.
+ */
+void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
+{
+ if (!need_resched()) {
+ if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
+ clflush((void *)&current_thread_info()->flags);
+
+ __monitor((void *)&current_thread_info()->flags, 0, 0);
+ smp_mb();
+ if (!need_resched())
+ __mwait(ax, cx);
+ }
+}
+
void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
{
unsigned int cpu = smp_processor_id();
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e1ba8cb..e7e3b01 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -438,29 +438,6 @@ void cpu_idle_wait(void)
}
EXPORT_SYMBOL_GPL(cpu_idle_wait);
-/*
- * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
- * which can obviate IPI to trigger checking of need_resched.
- * We execute MONITOR against need_resched and enter optimized wait state
- * through MWAIT. Whenever someone changes need_resched, we would be woken
- * up from MWAIT (without an IPI).
- *
- * New with Core Duo processors, MWAIT can take some hints based on CPU
- * capability.
- */
-void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
-{
- if (!need_resched()) {
- if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
- clflush((void *)&current_thread_info()->flags);
-
- __monitor((void *)&current_thread_info()->flags, 0, 0);
- smp_mb();
- if (!need_resched())
- __mwait(ax, cx);
- }
-}
-
/* Default MONITOR/MWAIT with no hints, used for default C1 state */
static void mwait_idle(void)
{
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a3d0dc5..7a3b651 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -38,6 +38,7 @@
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/kdebug.h>
+#include <linux/cpuidle.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -109,7 +110,8 @@ void cpu_idle(void)
local_irq_disable();
/* Don't trace irqs off for idle */
stop_critical_timings();
- pm_idle();
+ if (cpuidle_idle_call())
+ pm_idle();
start_critical_timings();
}
tick_nohz_restart_sched_tick();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ca6f7ab..f693e44 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -37,6 +37,7 @@
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/ftrace.h>
+#include <linux/cpuidle.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -136,7 +137,8 @@ void cpu_idle(void)
enter_idle();
/* Don't trace irqs off for idle */
stop_critical_timings();
- pm_idle();
+ if (cpuidle_idle_call())
+ pm_idle();
start_critical_timings();
/* In many cases the interrupt that ended idle
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 68c3c13..ae3cb23 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -246,10 +246,9 @@ static void add_resources(struct pci_root_info *info)
conflict = insert_resource_conflict(root, res);
if (conflict)
- dev_err(&info->bridge->dev,
- "address space collision: host bridge window %pR "
- "conflicts with %s %pR\n",
- res, conflict->name, conflict);
+ dev_info(&info->bridge->dev,
+ "ignoring host bridge window %pR (conflicts with %s %pR)\n",
+ res, conflict->name, conflict);
else
pci_bus_add_resource(info->bus, res, 0);
}
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
index 67858be..9917609 100644
--- a/arch/x86/pci/ce4100.c
+++ b/arch/x86/pci/ce4100.c
@@ -257,6 +257,7 @@ static int ce4100_conf_read(unsigned int seg, unsigned int bus,
{
int i;
+ WARN_ON(seg);
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
if (bus1_fixups[i].dev_func == devfn &&
@@ -282,6 +283,7 @@ static int ce4100_conf_write(unsigned int seg, unsigned int bus,
{
int i;
+ WARN_ON(seg);
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
if (bus1_fixups[i].dev_func == devfn &&
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 5fe7502..92df322 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -247,13 +247,6 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
},
#endif /* __i386__ */
{
- .callback = find_sort_method,
- .ident = "Dell System",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
- },
- },
- {
.callback = set_bf_sort,
.ident = "Dell PowerEdge 1950",
.matches = {
@@ -294,6 +287,13 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
},
},
{
+ .callback = find_sort_method,
+ .ident = "Dell System",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+ },
+ },
+ {
.callback = set_bf_sort,
.ident = "HP ProLiant BL20p G3",
.matches = {
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index e6fd847..4f2c704 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -22,7 +22,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus,
{
unsigned long flags;
- if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
+ if (seg || (bus > 255) || (devfn > 255) || (reg > 4095)) {
*value = -1;
return -EINVAL;
}
@@ -53,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
{
unsigned long flags;
- if ((bus > 255) || (devfn > 255) || (reg > 4095))
+ if (seg || (bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
raw_spin_lock_irqsave(&pci_config_lock, flags);
@@ -97,6 +97,7 @@ static int pci_conf2_read(unsigned int seg, unsigned int bus,
unsigned long flags;
int dev, fn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255)) {
*value = -1;
return -EINVAL;
@@ -138,6 +139,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus,
unsigned long flags;
int dev, fn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index 5c9e245..512a88c 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -34,6 +34,7 @@ static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+ WARN_ON(seg);
if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -73,6 +74,7 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+ WARN_ON(seg);
if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index 13700ec..5262603 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -206,6 +206,8 @@ static int pci_olpc_read(unsigned int seg, unsigned int bus,
{
uint32_t *addr;
+ WARN_ON(seg);
+
/* Use the hardware mechanism for non-simulated devices */
if (!is_simulated(bus, devfn))
return pci_direct_conf1.read(seg, bus, devfn, reg, len, value);
@@ -264,6 +266,8 @@ static int pci_olpc_read(unsigned int seg, unsigned int bus,
static int pci_olpc_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, uint32_t value)
{
+ WARN_ON(seg);
+
/* Use the hardware mechanism for non-simulated devices */
if (!is_simulated(bus, devfn))
return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index a5f7d0d..f685535 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -181,6 +181,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ WARN_ON(seg);
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -247,6 +248,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index 03008f7..6f2f8ee 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -24,7 +24,7 @@ static void pci_visws_disable_irq(struct pci_dev *dev) { }
unsigned int pci_bus0, pci_bus1;
-static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq, bus = dev->bus->number;
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index f61ccdd..1ea3877 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_X86_MRST) += mrst.o
obj-$(CONFIG_X86_MRST) += vrtc.o
obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o
+obj-$(CONFIG_X86_MRST) += pmu.o
diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c
new file mode 100644
index 0000000..9281da7
--- /dev/null
+++ b/arch/x86/platform/mrst/pmu.c
@@ -0,0 +1,817 @@
+/*
+ * mrst/pmu.c - driver for MRST Power Management Unit
+ *
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+#include <linux/sfi.h>
+#include <asm/intel_scu_ipc.h>
+#include "pmu.h"
+
+#define IPCMSG_FW_REVISION 0xF4
+
+struct mrst_device {
+ u16 pci_dev_num; /* DEBUG only */
+ u16 lss;
+ u16 latest_request;
+ unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */
+};
+
+/*
+ * comlete list of MRST PCI devices
+ */
+static struct mrst_device mrst_devs[] = {
+/* 0 */ { 0x0800, LSS_SPI0 }, /* Moorestown SPI Ctrl 0 */
+/* 1 */ { 0x0801, LSS_SPI1 }, /* Moorestown SPI Ctrl 1 */
+/* 2 */ { 0x0802, LSS_I2C0 }, /* Moorestown I2C 0 */
+/* 3 */ { 0x0803, LSS_I2C1 }, /* Moorestown I2C 1 */
+/* 4 */ { 0x0804, LSS_I2C2 }, /* Moorestown I2C 2 */
+/* 5 */ { 0x0805, LSS_KBD }, /* Moorestown Keyboard Ctrl */
+/* 6 */ { 0x0806, LSS_USB_HC }, /* Moorestown USB Ctrl */
+/* 7 */ { 0x0807, LSS_SD_HC0 }, /* Moorestown SD Host Ctrl 0 */
+/* 8 */ { 0x0808, LSS_SD_HC1 }, /* Moorestown SD Host Ctrl 1 */
+/* 9 */ { 0x0809, LSS_NAND }, /* Moorestown NAND Ctrl */
+/* 10 */ { 0x080a, LSS_AUDIO }, /* Moorestown Audio Ctrl */
+/* 11 */ { 0x080b, LSS_IMAGING }, /* Moorestown ISP */
+/* 12 */ { 0x080c, LSS_SECURITY }, /* Moorestown Security Controller */
+/* 13 */ { 0x080d, LSS_DISPLAY }, /* Moorestown External Displays */
+/* 14 */ { 0x080e, 0 }, /* Moorestown SCU IPC */
+/* 15 */ { 0x080f, LSS_GPIO }, /* Moorestown GPIO Controller */
+/* 16 */ { 0x0810, 0 }, /* Moorestown Power Management Unit */
+/* 17 */ { 0x0811, LSS_USB_OTG }, /* Moorestown OTG Ctrl */
+/* 18 */ { 0x0812, LSS_SPI2 }, /* Moorestown SPI Ctrl 2 */
+/* 19 */ { 0x0813, 0 }, /* Moorestown SC DMA */
+/* 20 */ { 0x0814, LSS_AUDIO_LPE }, /* Moorestown LPE DMA */
+/* 21 */ { 0x0815, LSS_AUDIO_SSP }, /* Moorestown SSP0 */
+
+/* 22 */ { 0x084F, LSS_SD_HC2 }, /* Moorestown SD Host Ctrl 2 */
+
+/* 23 */ { 0x4102, 0 }, /* Lincroft */
+/* 24 */ { 0x4110, 0 }, /* Lincroft */
+};
+
+/* n.b. We ignore PCI-id 0x815 in LSS9 b/c MeeGo has no driver for it */
+static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
+static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
+ 0x0804, 0x0805, 0x080f, 0};
+
+/* handle concurrent SMP invokations of pmu_pci_set_power_state() */
+static spinlock_t mrst_pmu_power_state_lock;
+
+static unsigned int wake_counters[MRST_NUM_LSS]; /* DEBUG only */
+static unsigned int pmu_irq_stats[INT_INVALID + 1]; /* DEBUG only */
+
+static int graphics_is_off;
+static int lss_s0i3_enabled;
+static bool mrst_pmu_s0i3_enable;
+
+/* debug counters */
+static u32 pmu_wait_ready_calls;
+static u32 pmu_wait_ready_udelays;
+static u32 pmu_wait_ready_udelays_max;
+static u32 pmu_wait_done_calls;
+static u32 pmu_wait_done_udelays;
+static u32 pmu_wait_done_udelays_max;
+static u32 pmu_set_power_state_entry;
+static u32 pmu_set_power_state_send_cmd;
+
+static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num)
+{
+ int index = 0;
+
+ if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815))
+ index = pci_dev_num - 0x800;
+ else if (pci_dev_num == 0x084F)
+ index = 22;
+ else if (pci_dev_num == 0x4102)
+ index = 23;
+ else if (pci_dev_num == 0x4110)
+ index = 24;
+
+ if (pci_dev_num != mrst_devs[index].pci_dev_num) {
+ WARN_ONCE(1, FW_BUG "Unknown PCI device 0x%04X\n", pci_dev_num);
+ return 0;
+ }
+
+ return &mrst_devs[index];
+}
+
+/**
+ * mrst_pmu_validate_cstates
+ * @dev: cpuidle_device
+ *
+ * Certain states are not appropriate for governor to pick in some cases.
+ * This function will be called as cpuidle_device's prepare callback and
+ * thus tells governor to ignore such states when selecting the next state
+ * to enter.
+ */
+
+#define IDLE_STATE4_IS_C6 4
+#define IDLE_STATE5_IS_S0I3 5
+
+int mrst_pmu_invalid_cstates(void)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * Demote to C4 if the PMU is busy.
+ * Since LSS changes leave the busy bit clear...
+ * busy means either the PMU is waiting for an ACK-C6 that
+ * isn't coming due to an MWAIT that returned immediately;
+ * or we returned from S0i3 successfully, and the PMU
+ * is not done sending us interrupts.
+ */
+ if (pmu_read_busy_status())
+ return 1 << IDLE_STATE4_IS_C6 | 1 << IDLE_STATE5_IS_S0I3;
+
+ /*
+ * Disallow S0i3 if: PMU is not initialized, or CPU1 is active,
+ * or if device LSS is insufficient, or the GPU is active,
+ * or if it has been explicitly disabled.
+ */
+ if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) ||
+ !lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable)
+ return 1 << IDLE_STATE5_IS_S0I3;
+ else
+ return 0;
+}
+
+/*
+ * pmu_update_wake_counters(): read PM_WKS, update wake_counters[]
+ * DEBUG only.
+ */
+static void pmu_update_wake_counters(void)
+{
+ int lss;
+ u32 wake_status;
+
+ wake_status = pmu_read_wks();
+
+ for (lss = 0; lss < MRST_NUM_LSS; ++lss) {
+ if (wake_status & (1 << lss))
+ wake_counters[lss]++;
+ }
+}
+
+int mrst_pmu_s0i3_entry(void)
+{
+ int status;
+
+ /* Clear any possible error conditions */
+ pmu_write_ics(0x300);
+
+ /* set wake control to current D-states */
+ pmu_write_wssc(S0I3_SSS_TARGET);
+
+ status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd);
+ pmu_update_wake_counters();
+ return status;
+}
+
+/* poll for maximum of 5ms for busy bit to clear */
+static int pmu_wait_ready(void)
+{
+ int udelays;
+
+ pmu_wait_ready_calls++;
+
+ for (udelays = 0; udelays < 500; ++udelays) {
+ if (udelays > pmu_wait_ready_udelays_max)
+ pmu_wait_ready_udelays_max = udelays;
+
+ if (pmu_read_busy_status() == 0)
+ return 0;
+
+ udelay(10);
+ pmu_wait_ready_udelays++;
+ }
+
+ /*
+ * if this fires, observe
+ * /sys/kernel/debug/mrst_pmu_wait_ready_calls
+ * /sys/kernel/debug/mrst_pmu_wait_ready_udelays
+ */
+ WARN_ONCE(1, "SCU not ready for 5ms");
+ return -EBUSY;
+}
+/* poll for maximum of 50ms us for busy bit to clear */
+static int pmu_wait_done(void)
+{
+ int udelays;
+
+ pmu_wait_done_calls++;
+
+ for (udelays = 0; udelays < 500; ++udelays) {
+ if (udelays > pmu_wait_done_udelays_max)
+ pmu_wait_done_udelays_max = udelays;
+
+ if (pmu_read_busy_status() == 0)
+ return 0;
+
+ udelay(100);
+ pmu_wait_done_udelays++;
+ }
+
+ /*
+ * if this fires, observe
+ * /sys/kernel/debug/mrst_pmu_wait_done_calls
+ * /sys/kernel/debug/mrst_pmu_wait_done_udelays
+ */
+ WARN_ONCE(1, "SCU not done for 50ms");
+ return -EBUSY;
+}
+
+u32 mrst_pmu_msi_is_disabled(void)
+{
+ return pmu_msi_is_disabled();
+}
+
+void mrst_pmu_enable_msi(void)
+{
+ pmu_msi_enable();
+}
+
+/**
+ * pmu_irq - pmu driver interrupt handler
+ * Context: interrupt context
+ */
+static irqreturn_t pmu_irq(int irq, void *dummy)
+{
+ union pmu_pm_ics pmu_ics;
+
+ pmu_ics.value = pmu_read_ics();
+
+ if (!pmu_ics.bits.pending)
+ return IRQ_NONE;
+
+ switch (pmu_ics.bits.cause) {
+ case INT_SPURIOUS:
+ case INT_CMD_DONE:
+ case INT_CMD_ERR:
+ case INT_WAKE_RX:
+ case INT_SS_ERROR:
+ case INT_S0IX_MISS:
+ case INT_NO_ACKC6:
+ pmu_irq_stats[pmu_ics.bits.cause]++;
+ break;
+ default:
+ pmu_irq_stats[INT_INVALID]++;
+ }
+
+ pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Translate PCI power management to MRST LSS D-states
+ */
+static int pci_2_mrst_state(int lss, pci_power_t pci_state)
+{
+ switch (pci_state) {
+ case PCI_D0:
+ if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET)
+ return D0i1;
+ else
+ return D0;
+ case PCI_D1:
+ return D0i1;
+ case PCI_D2:
+ return D0i2;
+ case PCI_D3hot:
+ case PCI_D3cold:
+ return D0i3;
+ default:
+ WARN(1, "pci_state %d\n", pci_state);
+ return 0;
+ }
+}
+
+static int pmu_issue_command(u32 pm_ssc)
+{
+ union pmu_pm_set_cfg_cmd_t command;
+
+ if (pmu_read_busy_status()) {
+ pr_debug("pmu is busy, Operation not permitted\n");
+ return -1;
+ }
+
+ /*
+ * enable interrupts in PMU so that interrupts are
+ * propagated when ioc bit for a particular set
+ * command is set
+ */
+
+ pmu_irq_enable();
+
+ /* Configure the sub systems for pmu2 */
+
+ pmu_write_ssc(pm_ssc);
+
+ /*
+ * Send the set config command for pmu its configured
+ * for mode CM_IMMEDIATE & hence with No Trigger
+ */
+
+ command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE;
+ command.pmu2_params.d_param.cfg_delay = 0;
+ command.pmu2_params.d_param.rsvd = 0;
+
+ /* construct the command to send SET_CFG to particular PMU */
+ command.pmu2_params.d_param.cmd = SET_CFG_CMD;
+ command.pmu2_params.d_param.ioc = 0;
+ command.pmu2_params.d_param.mode_id = 0;
+ command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0;
+
+ /* write the value of PM_CMD into particular PMU */
+ pr_debug("pmu command being written %x\n",
+ command.pmu_pm_set_cfg_cmd_value);
+
+ pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value);
+
+ return 0;
+}
+
+static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state)
+{
+ u16 existing_request;
+ int i;
+
+ for (i = 0; ids[i]; ++i) {
+ struct mrst_device *mrst_dev;
+
+ mrst_dev = pci_id_2_mrst_dev(ids[i]);
+ if (unlikely(!mrst_dev))
+ continue;
+
+ existing_request = mrst_dev->latest_request;
+ if (existing_request < pci_state)
+ pci_state = existing_request;
+ }
+ return pci_state;
+}
+
+/**
+ * pmu_pci_set_power_state - Callback function is used by all the PCI devices
+ * for a platform specific device power on/shutdown.
+ */
+
+int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state)
+{
+ u32 old_sss, new_sss;
+ int status = 0;
+ struct mrst_device *mrst_dev;
+
+ pmu_set_power_state_entry++;
+
+ BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL);
+ BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold);
+
+ mrst_dev = pci_id_2_mrst_dev(pdev->device);
+ if (unlikely(!mrst_dev))
+ return -ENODEV;
+
+ mrst_dev->pci_state_counts[pci_state]++; /* count invocations */
+
+ /* PMU driver calls self as part of PCI initialization, ignore */
+ if (pdev->device == PCI_DEV_ID_MRST_PMU)
+ return 0;
+
+ BUG_ON(!pmu_reg); /* SW bug if called before initialized */
+
+ spin_lock(&mrst_pmu_power_state_lock);
+
+ if (pdev->d3_delay) {
+ dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n",
+ pdev->d3_delay);
+ pdev->d3_delay = 0;
+ }
+ /*
+ * If Lincroft graphics, simply remember state
+ */
+ if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY
+ && !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) {
+ if (pci_state == PCI_D0)
+ graphics_is_off = 0;
+ else
+ graphics_is_off = 1;
+ goto ret;
+ }
+
+ if (!mrst_dev->lss)
+ goto ret; /* device with no LSS */
+
+ if (mrst_dev->latest_request == pci_state)
+ goto ret; /* no change */
+
+ mrst_dev->latest_request = pci_state; /* record latest request */
+
+ /*
+ * LSS9 and LSS10 contain multiple PCI devices.
+ * Use the lowest numbered (highest power) state in the LSS
+ */
+ if (mrst_dev->lss == 9)
+ pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state);
+ else if (mrst_dev->lss == 10)
+ pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state);
+
+ status = pmu_wait_ready();
+ if (status)
+ goto ret;
+
+ old_sss = pmu_read_sss();
+ new_sss = old_sss & ~SSMSK(3, mrst_dev->lss);
+ new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state),
+ mrst_dev->lss);
+
+ if (new_sss == old_sss)
+ goto ret; /* nothing to do */
+
+ pmu_set_power_state_send_cmd++;
+
+ status = pmu_issue_command(new_sss);
+
+ if (unlikely(status != 0)) {
+ dev_err(&pdev->dev, "Failed to Issue a PM command\n");
+ goto ret;
+ }
+
+ if (pmu_wait_done())
+ goto ret;
+
+ lss_s0i3_enabled =
+ ((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET);
+ret:
+ spin_unlock(&mrst_pmu_power_state_lock);
+ return status;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"};
+
+static inline const char *d0ix_name(int state)
+{
+ return d0ix_names[(int) state];
+}
+
+static int debug_mrst_pmu_show(struct seq_file *s, void *unused)
+{
+ struct pci_dev *pdev = NULL;
+ u32 cur_pmsss;
+ int lss;
+
+ seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET);
+
+ cur_pmsss = pmu_read_sss();
+
+ seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET);
+
+ seq_printf(s, "0x%08X Current SSS ", cur_pmsss);
+ seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n");
+
+ if (cpumask_equal(cpu_online_mask, cpumask_of(0)))
+ seq_printf(s, "cpu0 is only cpu online\n");
+ else
+ seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n");
+
+ seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]");
+
+
+ for_each_pci_dev(pdev) {
+ int pos;
+ u16 pmcsr;
+ struct mrst_device *mrst_dev;
+ int i;
+
+ mrst_dev = pci_id_2_mrst_dev(pdev->device);
+
+ seq_printf(s, "%s %04x/%04X %-16.16s ",
+ dev_name(&pdev->dev),
+ pdev->vendor, pdev->device,
+ dev_driver_string(&pdev->dev));
+
+ if (unlikely (!mrst_dev)) {
+ seq_printf(s, " UNKNOWN\n");
+ continue;
+ }
+
+ if (mrst_dev->lss)
+ seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss,
+ d0ix_name(((cur_pmsss >>
+ (mrst_dev->lss * 2)) & 0x3)));
+ else
+ seq_printf(s, " ");
+
+ /* PCI PM config space setting */
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos != 0) {
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ seq_printf(s, "PCI-%-4s",
+ pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK));
+ } else {
+ seq_printf(s, " ");
+ }
+
+ seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request));
+ for (i = 0; i <= PCI_D3cold; ++i)
+ seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]);
+
+ if (mrst_dev->lss) {
+ unsigned int lssmask;
+
+ lssmask = SSMSK(D0i3, mrst_dev->lss);
+
+ if ((lssmask & S0I3_SSS_TARGET) &&
+ ((lssmask & cur_pmsss) !=
+ (lssmask & S0I3_SSS_TARGET)))
+ seq_printf(s , "[BLOCKS s0i3]");
+ }
+
+ seq_printf(s, "\n");
+ }
+ seq_printf(s, "Wake Counters:\n");
+ for (lss = 0; lss < MRST_NUM_LSS; ++lss)
+ seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]);
+
+ seq_printf(s, "Interrupt Counters:\n");
+ seq_printf(s,
+ "INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n"
+ "INT_CMD_ERR \t%8u\n" "INT_WAKE_RX \t%8u\n"
+ "INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n"
+ "INT_NO_ACKC6 \t%8u\n" "INT_INVALID \t%8u\n",
+ pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE],
+ pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX],
+ pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS],
+ pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]);
+
+ seq_printf(s, "mrst_pmu_wait_ready_calls %8d\n",
+ pmu_wait_ready_calls);
+ seq_printf(s, "mrst_pmu_wait_ready_udelays %8d\n",
+ pmu_wait_ready_udelays);
+ seq_printf(s, "mrst_pmu_wait_ready_udelays_max %8d\n",
+ pmu_wait_ready_udelays_max);
+ seq_printf(s, "mrst_pmu_wait_done_calls %8d\n",
+ pmu_wait_done_calls);
+ seq_printf(s, "mrst_pmu_wait_done_udelays %8d\n",
+ pmu_wait_done_udelays);
+ seq_printf(s, "mrst_pmu_wait_done_udelays_max %8d\n",
+ pmu_wait_done_udelays_max);
+ seq_printf(s, "mrst_pmu_set_power_state_entry %8d\n",
+ pmu_set_power_state_entry);
+ seq_printf(s, "mrst_pmu_set_power_state_send_cmd %8d\n",
+ pmu_set_power_state_send_cmd);
+ seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status());
+
+ return 0;
+}
+
+static int debug_mrst_pmu_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, debug_mrst_pmu_show, NULL);
+}
+
+static const struct file_operations devices_state_operations = {
+ .open = debug_mrst_pmu_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif /* DEBUG_FS */
+
+/*
+ * Validate SCU PCI shim PCI vendor capability byte
+ * against LSS hard-coded in mrst_devs[] above.
+ * DEBUG only.
+ */
+static void pmu_scu_firmware_debug(void)
+{
+ struct pci_dev *pdev = NULL;
+
+ for_each_pci_dev(pdev) {
+ struct mrst_device *mrst_dev;
+ u8 pci_config_lss;
+ int pos;
+
+ mrst_dev = pci_id_2_mrst_dev(pdev->device);
+ if (unlikely(!mrst_dev)) {
+ printk(KERN_ERR FW_BUG "pmu: Unknown "
+ "PCI device 0x%04X\n", pdev->device);
+ continue;
+ }
+
+ if (mrst_dev->lss == 0)
+ continue; /* no LSS in our table */
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
+ if (!pos != 0) {
+ printk(KERN_ERR FW_BUG "pmu: 0x%04X "
+ "missing PCI Vendor Capability\n",
+ pdev->device);
+ continue;
+ }
+ pci_read_config_byte(pdev, pos + 4, &pci_config_lss);
+ if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) {
+ printk(KERN_ERR FW_BUG "pmu: 0x%04X "
+ "invalid PCI Vendor Capability 0x%x "
+ " expected LSS 0x%X\n",
+ pdev->device, pci_config_lss, mrst_dev->lss);
+ continue;
+ }
+ pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK;
+
+ if (mrst_dev->lss == pci_config_lss)
+ continue;
+
+ printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n",
+ pdev->device, pci_config_lss, mrst_dev->lss);
+ }
+}
+
+/**
+ * pmu_probe
+ */
+static int __devinit pmu_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pci_id)
+{
+ int ret;
+ struct mrst_pmu_reg *pmu;
+
+ /* Init the device */
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to Enable PCI device\n");
+ return ret;
+ }
+
+ ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
+ goto out_err1;
+ }
+
+ /* Map the memory of PMU reg base */
+ pmu = pci_iomap(pdev, 0, 0);
+ if (!pmu) {
+ dev_err(&pdev->dev, "Unable to map the PMU address space\n");
+ ret = -ENOMEM;
+ goto out_err2;
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ /* /sys/kernel/debug/mrst_pmu */
+ (void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO,
+ NULL, NULL, &devices_state_operations);
+#endif
+ pmu_reg = pmu; /* success */
+
+ if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) {
+ dev_err(&pdev->dev, "Registering isr has failed\n");
+ ret = -1;
+ goto out_err3;
+ }
+
+ pmu_scu_firmware_debug();
+
+ pmu_write_wkc(S0I3_WAKE_SOURCES); /* Enable S0i3 wakeup sources */
+
+ pmu_wait_ready();
+
+ pmu_write_ssc(D0I1_ACG_SSS_TARGET); /* Enable Auto-Clock_Gating */
+ pmu_write_cmd(0x201);
+
+ spin_lock_init(&mrst_pmu_power_state_lock);
+
+ /* Enable the hardware interrupt */
+ pmu_irq_enable();
+ return 0;
+
+out_err3:
+ free_irq(pdev->irq, NULL);
+ pci_iounmap(pdev, pmu_reg);
+ pmu_reg = NULL;
+out_err2:
+ pci_release_region(pdev, 0);
+out_err1:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void __devexit pmu_remove(struct pci_dev *pdev)
+{
+ dev_err(&pdev->dev, "Mid PM pmu_remove called\n");
+
+ /* Freeing up the irq */
+ free_irq(pdev->irq, NULL);
+
+ pci_iounmap(pdev, pmu_reg);
+ pmu_reg = NULL;
+
+ /* disable the current PCI device */
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = {
+ { PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, pmu_pci_ids);
+
+static struct pci_driver driver = {
+ .name = MRST_PMU_DRV_NAME,
+ .id_table = pmu_pci_ids,
+ .probe = pmu_probe,
+ .remove = __devexit_p(pmu_remove),
+};
+
+/**
+ * pmu_pci_register - register the PMU driver as PCI device
+ */
+static int __init pmu_pci_register(void)
+{
+ return pci_register_driver(&driver);
+}
+
+/* Register and probe via fs_initcall() to preceed device_initcall() */
+fs_initcall(pmu_pci_register);
+
+static void __exit mid_pci_cleanup(void)
+{
+ pci_unregister_driver(&driver);
+}
+
+static int ia_major;
+static int ia_minor;
+
+static int pmu_sfi_parse_oem(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+
+ sb = (struct sfi_table_simple *)table;
+ ia_major = (sb->pentry[1] >> 0) & 0xFFFF;
+ ia_minor = (sb->pentry[1] >> 16) & 0xFFFF;
+ printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n",
+ ia_major, ia_minor);
+
+ return 0;
+}
+
+static int __init scu_fw_check(void)
+{
+ int ret;
+ u32 fw_version;
+
+ if (!pmu_reg)
+ return 0; /* this driver didn't probe-out */
+
+ sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem);
+
+ if (ia_major < 0x6005 || ia_minor < 0x1525) {
+ WARN(1, "mrst_pmu: IA FW version too old\n");
+ return -1;
+ }
+
+ ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0,
+ &fw_version, 1);
+
+ if (ret) {
+ WARN(1, "mrst_pmu: IPC FW version? %d\n", ret);
+ } else {
+ int scu_major = (fw_version >> 8) & 0xFF;
+ int scu_minor = (fw_version >> 0) & 0xFF;
+
+ printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version);
+
+ if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) {
+ printk(KERN_INFO "mrst_pmu: enabling S0i3\n");
+ mrst_pmu_s0i3_enable = true;
+ } else {
+ WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X",
+ scu_major, scu_minor);
+ }
+ }
+ return 0;
+}
+late_initcall(scu_fw_check);
+module_exit(mid_pci_cleanup);
diff --git a/arch/x86/platform/mrst/pmu.h b/arch/x86/platform/mrst/pmu.h
new file mode 100644
index 0000000..bfbfe64
--- /dev/null
+++ b/arch/x86/platform/mrst/pmu.h
@@ -0,0 +1,234 @@
+/*
+ * mrst/pmu.h - private definitions for MRST Power Management Unit mrst/pmu.c
+ *
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _MRST_PMU_H_
+#define _MRST_PMU_H_
+
+#define PCI_DEV_ID_MRST_PMU 0x0810
+#define MRST_PMU_DRV_NAME "mrst_pmu"
+#define PCI_SUB_CLASS_MASK 0xFF00
+
+#define PCI_VENDOR_CAP_LOG_ID_MASK 0x7F
+#define PCI_VENDOR_CAP_LOG_SS_MASK 0x80
+
+#define SUB_SYS_ALL_D0I1 0x01155555
+#define S0I3_WAKE_SOURCES 0x00001FFF
+
+#define PM_S0I3_COMMAND \
+ ((0 << 31) | /* Reserved */ \
+ (0 << 30) | /* Core must be idle */ \
+ (0xc2 << 22) | /* ACK C6 trigger */ \
+ (3 << 19) | /* Trigger on DMI message */ \
+ (3 << 16) | /* Enter S0i3 */ \
+ (0 << 13) | /* Numeric mode ID (sw) */ \
+ (3 << 9) | /* Trigger mode */ \
+ (0 << 8) | /* Do not interrupt */ \
+ (1 << 0)) /* Set configuration */
+
+#define LSS_DMI 0
+#define LSS_SD_HC0 1
+#define LSS_SD_HC1 2
+#define LSS_NAND 3
+#define LSS_IMAGING 4
+#define LSS_SECURITY 5
+#define LSS_DISPLAY 6
+#define LSS_USB_HC 7
+#define LSS_USB_OTG 8
+#define LSS_AUDIO 9
+#define LSS_AUDIO_LPE 9
+#define LSS_AUDIO_SSP 9
+#define LSS_I2C0 10
+#define LSS_I2C1 10
+#define LSS_I2C2 10
+#define LSS_KBD 10
+#define LSS_SPI0 10
+#define LSS_SPI1 10
+#define LSS_SPI2 10
+#define LSS_GPIO 10
+#define LSS_SRAM 11 /* used by SCU, do not touch */
+#define LSS_SD_HC2 12
+/* LSS hardware bits 15,14,13 are hardwired to 0, thus unusable */
+#define MRST_NUM_LSS 13
+
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+
+#define SSMSK(mask, lss) ((mask) << ((lss) * 2))
+#define D0 0
+#define D0i1 1
+#define D0i2 2
+#define D0i3 3
+
+#define S0I3_SSS_TARGET ( \
+ SSMSK(D0i1, LSS_DMI) | \
+ SSMSK(D0i3, LSS_SD_HC0) | \
+ SSMSK(D0i3, LSS_SD_HC1) | \
+ SSMSK(D0i3, LSS_NAND) | \
+ SSMSK(D0i3, LSS_SD_HC2) | \
+ SSMSK(D0i3, LSS_IMAGING) | \
+ SSMSK(D0i3, LSS_SECURITY) | \
+ SSMSK(D0i3, LSS_DISPLAY) | \
+ SSMSK(D0i3, LSS_USB_HC) | \
+ SSMSK(D0i3, LSS_USB_OTG) | \
+ SSMSK(D0i3, LSS_AUDIO) | \
+ SSMSK(D0i1, LSS_I2C0))
+
+/*
+ * D0i1 on Langwell is Autonomous Clock Gating (ACG).
+ * Enable ACG on every LSS except camera and audio
+ */
+#define D0I1_ACG_SSS_TARGET \
+ (SUB_SYS_ALL_D0I1 & ~SSMSK(D0i1, LSS_IMAGING) & ~SSMSK(D0i1, LSS_AUDIO))
+
+enum cm_mode {
+ CM_NOP, /* ignore the config mode value */
+ CM_IMMEDIATE,
+ CM_DELAY,
+ CM_TRIGGER,
+ CM_INVALID
+};
+
+enum sys_state {
+ SYS_STATE_S0I0,
+ SYS_STATE_S0I1,
+ SYS_STATE_S0I2,
+ SYS_STATE_S0I3,
+ SYS_STATE_S3,
+ SYS_STATE_S5
+};
+
+#define SET_CFG_CMD 1
+
+enum int_status {
+ INT_SPURIOUS = 0,
+ INT_CMD_DONE = 1,
+ INT_CMD_ERR = 2,
+ INT_WAKE_RX = 3,
+ INT_SS_ERROR = 4,
+ INT_S0IX_MISS = 5,
+ INT_NO_ACKC6 = 6,
+ INT_INVALID = 7,
+};
+
+/* PMU register interface */
+static struct mrst_pmu_reg {
+ u32 pm_sts; /* 0x00 */
+ u32 pm_cmd; /* 0x04 */
+ u32 pm_ics; /* 0x08 */
+ u32 _resv1; /* 0x0C */
+ u32 pm_wkc[2]; /* 0x10 */
+ u32 pm_wks[2]; /* 0x18 */
+ u32 pm_ssc[4]; /* 0x20 */
+ u32 pm_sss[4]; /* 0x30 */
+ u32 pm_wssc[4]; /* 0x40 */
+ u32 pm_c3c4; /* 0x50 */
+ u32 pm_c5c6; /* 0x54 */
+ u32 pm_msi_disable; /* 0x58 */
+} *pmu_reg;
+
+static inline u32 pmu_read_sts(void) { return readl(&pmu_reg->pm_sts); }
+static inline u32 pmu_read_ics(void) { return readl(&pmu_reg->pm_ics); }
+static inline u32 pmu_read_wks(void) { return readl(&pmu_reg->pm_wks[0]); }
+static inline u32 pmu_read_sss(void) { return readl(&pmu_reg->pm_sss[0]); }
+
+static inline void pmu_write_cmd(u32 arg) { writel(arg, &pmu_reg->pm_cmd); }
+static inline void pmu_write_ics(u32 arg) { writel(arg, &pmu_reg->pm_ics); }
+static inline void pmu_write_wkc(u32 arg) { writel(arg, &pmu_reg->pm_wkc[0]); }
+static inline void pmu_write_ssc(u32 arg) { writel(arg, &pmu_reg->pm_ssc[0]); }
+static inline void pmu_write_wssc(u32 arg)
+ { writel(arg, &pmu_reg->pm_wssc[0]); }
+
+static inline void pmu_msi_enable(void) { writel(0, &pmu_reg->pm_msi_disable); }
+static inline u32 pmu_msi_is_disabled(void)
+ { return readl(&pmu_reg->pm_msi_disable); }
+
+union pmu_pm_ics {
+ struct {
+ u32 cause:8;
+ u32 enable:1;
+ u32 pending:1;
+ u32 reserved:22;
+ } bits;
+ u32 value;
+};
+
+static inline void pmu_irq_enable(void)
+{
+ union pmu_pm_ics pmu_ics;
+
+ pmu_ics.value = pmu_read_ics();
+ pmu_ics.bits.enable = 1;
+ pmu_write_ics(pmu_ics.value);
+}
+
+union pmu_pm_status {
+ struct {
+ u32 pmu_rev:8;
+ u32 pmu_busy:1;
+ u32 mode_id:4;
+ u32 Reserved:19;
+ } pmu_status_parts;
+ u32 pmu_status_value;
+};
+
+static inline int pmu_read_busy_status(void)
+{
+ union pmu_pm_status result;
+
+ result.pmu_status_value = pmu_read_sts();
+
+ return result.pmu_status_parts.pmu_busy;
+}
+
+/* pmu set config parameters */
+struct cfg_delay_param_t {
+ u32 cmd:8;
+ u32 ioc:1;
+ u32 cfg_mode:4;
+ u32 mode_id:3;
+ u32 sys_state:3;
+ u32 cfg_delay:8;
+ u32 rsvd:5;
+};
+
+struct cfg_trig_param_t {
+ u32 cmd:8;
+ u32 ioc:1;
+ u32 cfg_mode:4;
+ u32 mode_id:3;
+ u32 sys_state:3;
+ u32 cfg_trig_type:3;
+ u32 cfg_trig_val:8;
+ u32 cmbi:1;
+ u32 rsvd1:1;
+};
+
+union pmu_pm_set_cfg_cmd_t {
+ union {
+ struct cfg_delay_param_t d_param;
+ struct cfg_trig_param_t t_param;
+ } pmu2_params;
+ u32 pmu_pm_set_cfg_cmd_value;
+};
+
+#ifdef FUTURE_PATCH
+extern int mrst_s0i3_entry(u32 regval, u32 *regaddr);
+#else
+static inline int mrst_s0i3_entry(u32 regval, u32 *regaddr) { return -1; }
+#endif
+#endif
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 02ffd9e..df118a8 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -9,6 +9,7 @@
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/memblock.h>
+#include <linux/cpuidle.h>
#include <asm/elf.h>
#include <asm/vdso.h>
@@ -424,7 +425,7 @@ void __init xen_arch_setup(void)
#ifdef CONFIG_X86_32
boot_cpu_data.hlt_works_ok = 1;
#endif
- pm_idle = default_idle;
+ disable_cpuidle();
boot_option_idle_override = IDLE_HALT;
fiddle_vdso();
generated by cgit v0.10.2 at 2024-11-15 06:32:07 (GMT)