diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/common/scoop.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/corgi.c | 12 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/poodle.c | 12 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-n30.c | 30 |
4 files changed, 40 insertions, 20 deletions
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index cfd0d3e..688a595 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -17,6 +17,12 @@ #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) +/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c + There is no easy way to link multiple scoop devices into one + single entity for the pxa2xx_pcmcia device */ +int scoop_num; +struct scoop_pcmcia_dev *scoop_devs; + struct scoop_dev { void *base; spinlock_t scoop_lock; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 86b862f..06ea730 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -60,6 +60,15 @@ static struct scoop_config corgi_scoop_setup = { .io_out = CORGI_SCOOP_IO_OUT, }; +static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { +{ + .dev = &corgiscoop_device.dev, + .irq = CORGI_IRQ_GPIO_CF_IRQ, + .cd_irq = CORGI_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +}, +}; + struct platform_device corgiscoop_device = { .name = "sharp-scoop", .id = -1, @@ -241,6 +250,9 @@ static void __init corgi_init(void) pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); + scoop_num = 1; + scoop_devs = &corgi_pcmcia_scoop[0]; + platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 0e4f6fa..47cfb8b 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -62,6 +62,15 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; +static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { +{ + .dev = &poodle_scoop_device.dev, + .irq = POODLE_IRQ_GPIO_CF_IRQ, + .cd_irq = POODLE_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +}, +}; + /* LoCoMo device */ static struct resource locomo_resources[] = { @@ -147,6 +156,9 @@ static void __init poodle_init(void) set_pxa_fb_info(&poodle_fb_info); + scoop_num = 1; + scoop_devs = &poodle_pcmcia_scoop[0]; + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n"); diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 79044d9..66bf5bb 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -110,34 +110,24 @@ void __init n30_init_irq(void) s3c24xx_init_irq(); } - -static int n30_usbstart_thread(void *unused) -{ - /* Turn off suspend on both USB ports, and switch the - * selectable USB port to USB device mode. */ - writel(readl(S3C2410_MISCCR) & ~0x00003008, S3C2410_MISCCR); - - /* Turn off the D+ pull up for 3 seconds so that the USB host - * at the other end will do a rescan of the USB bus. */ - s3c2410_gpio_setpin(S3C2410_GPB3, 0); - - msleep_interruptible(3*HZ); - - s3c2410_gpio_setpin(S3C2410_GPB3, 1); - - return 0; -} - +/* GPB3 is the line that controls the pull-up for the USB D+ line */ void __init n30_init(void) { s3c_device_i2c.dev.platform_data = &n30_i2ccfg; - kthread_run(n30_usbstart_thread, NULL, "n30_usbstart"); + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); } MACHINE_START(N30, "Acer-N30") - /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */ + /* Maintainer: Christer Weinigel <christer@weinigel.se>, + Ben Dooks <ben-linux@fluff.org> + */ .phys_ram = S3C2410_SDRAM_PA, .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, |