diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-davinci/Kconfig | 31 | ||||
-rw-r--r-- | arch/arm/mach-davinci/board-da850-evm.c | 68 | ||||
-rw-r--r-- | arch/arm/mach-davinci/da850.c | 17 | ||||
-rw-r--r-- | arch/arm/mach-davinci/include/mach/da8xx.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-davinci/include/mach/mux.h | 9 |
5 files changed, 123 insertions, 3 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 84b7c17..330eea0 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -130,6 +130,37 @@ config MACH_DAVINCI_DA850_EVM help Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. +config DA850_UI_EXP + bool "DA850/OMAP-L138 UI (User Interface) board expander configuration" + depends on MACH_DAVINCI_DA850_EVM + select GPIO_PCA953X + help + Say Y here if you have the DA850/OMAP-L138 UI + (User Interface) board installed and you want to + enable the peripherals located on User Interface + board contorlled by TCA6416 expander. + +choice + prompt "Select peripherals connected to expander on UI board" + depends on DA850_UI_EXP + +config DA850_UI_NONE + bool "No peripheral is enabled" + help + Say Y if you do not want to enable any of the peripherals connected + to TCA6416 expander on DA850/OMAP-L138 EVM UI card + +config DA850_UI_RMII + bool "RMII Ethernet PHY" + help + Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM. + This PHY is found on the UI daughter card that is supplied with + the EVM. + NOTE: Please take care while choosing this option, MII PHY will + not be functional if RMII mode is selected. + +endchoice + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 05b2d87..53e434b 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -45,6 +45,8 @@ #define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) #define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) +#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "NOR filesystem", @@ -152,6 +154,7 @@ static void da850_evm_setup_nor_nand(void); static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *c) { + struct davinci_soc_info *soc_info = &davinci_soc_info; int sel_a, sel_b, sel_c, ret; sel_a = gpio + 7; @@ -186,6 +189,10 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, da850_evm_setup_nor_nand(); + if (soc_info->emac_pdata->rmii_en) + /* enable RMII */ + gpio_set_value(sel_a, 0); + return 0; exp_setup_selc_fail: @@ -509,6 +516,58 @@ static const short da850_evm_lcdc_pins[] = { -1 }; +static int __init da850_evm_config_emac(u8 rmii_en) +{ + void __iomem *cfg_chip3_base; + int ret; + u32 val; + + cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG); + + /* configure the CFGCHIP3 register for RMII or MII */ + val = __raw_readl(cfg_chip3_base); + if (rmii_en) + val |= BIT(8); + else + val &= ~BIT(8); + + __raw_writel(val, cfg_chip3_base); + + if (!rmii_en) + ret = da8xx_pinmux_setup(da850_cpgmac_pins); + else + ret = da8xx_pinmux_setup(da850_rmii_pins); + if (ret) + pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n", + ret); + + ret = davinci_cfg_reg(DA850_GPIO2_6); + if (ret) + pr_warning("da850_evm_init:GPIO(2,6) mux setup " + "failed\n"); + + ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); + if (ret) { + pr_warning("Cannot open GPIO %d\n", + DA850_MII_MDIO_CLKEN_PIN); + return ret; + } + + if (rmii_en) { + /* Disable MII MDIO clock */ + gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, 1); + pr_info("EMAC: RMII PHY configured, MII PHY will not be" + " functional\n"); + } else { + /* Enable MII MDIO clock */ + gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, 0); + pr_info("EMAC: MII PHY configured, RMII PHY will not be" + " functional\n"); + } + + return 0; +} + static __init void da850_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -536,12 +595,15 @@ static __init void da850_evm_init(void) soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; +#ifdef CONFIG_DA850_UI_RMII + soc_info->emac_pdata->rmii_en = 1; +#else soc_info->emac_pdata->rmii_en = 0; +#endif - ret = da8xx_pinmux_setup(da850_cpgmac_pins); + ret = da850_evm_config_emac(soc_info->emac_pdata->rmii_en); if (ret) - pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n", - ret); + pr_warning("da850_evm_init: emac setup failed: %d\n", ret); ret = da8xx_register_emac(); if (ret) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 1d6d8b4..b804d57 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -422,6 +422,14 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false) MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false) MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false) + MUX_CFG(DA850, RMII_TXD_0, 14, 12, 15, 8, false) + MUX_CFG(DA850, RMII_TXD_1, 14, 8, 15, 8, false) + MUX_CFG(DA850, RMII_TXEN, 14, 16, 15, 8, false) + MUX_CFG(DA850, RMII_CRS_DV, 15, 4, 15, 8, false) + MUX_CFG(DA850, RMII_RXD_0, 14, 24, 15, 8, false) + MUX_CFG(DA850, RMII_RXD_1, 14, 20, 15, 8, false) + MUX_CFG(DA850, RMII_RXER, 14, 28, 15, 8, false) + MUX_CFG(DA850, RMII_MHZ_50_CLK, 15, 0, 15, 0, false) /* McASP function */ MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false) MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false) @@ -524,6 +532,7 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false) MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false) /* GPIO function */ + MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false) MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false) MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) @@ -565,6 +574,14 @@ const short da850_cpgmac_pins[] __initdata = { -1 }; +const short da850_rmii_pins[] __initdata = { + DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, + DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + const short da850_mcasp_pins[] __initdata = { DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 401bf93..b4cf8b1 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -124,6 +124,7 @@ extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; extern const short da850_cpgmac_pins[]; +extern const short da850_rmii_pins[]; extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; extern const short da850_mmcsd0_pins[]; diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index b2c1ad0..16b8a7f 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -774,6 +774,14 @@ enum davinci_da850_index { DA850_MII_RXD_0, DA850_MDIO_CLK, DA850_MDIO_D, + DA850_RMII_TXD_0, + DA850_RMII_TXD_1, + DA850_RMII_TXEN, + DA850_RMII_CRS_DV, + DA850_RMII_RXD_0, + DA850_RMII_RXD_1, + DA850_RMII_RXER, + DA850_RMII_MHZ_50_CLK, /* McASP function */ DA850_ACLKR, @@ -881,6 +889,7 @@ enum davinci_da850_index { DA850_NEMA_CS_2, /* GPIO function */ + DA850_GPIO2_6, DA850_GPIO2_8, DA850_GPIO2_15, DA850_GPIO4_0, |