diff options
Diffstat (limited to 'drivers/acpi/acpica/nsprepkg.c')
-rw-r--r-- | drivers/acpi/acpica/nsprepkg.c | 621 |
1 files changed, 621 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c new file mode 100644 index 0000000..a401554 --- /dev/null +++ b/drivers/acpi/acpica/nsprepkg.c @@ -0,0 +1,621 @@ +/****************************************************************************** + * + * Module Name: nsprepkg - Validation of package objects for predefined names + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" +#include "acpredef.h" + +#define _COMPONENT ACPI_NAMESPACE +ACPI_MODULE_NAME("nsprepkg") + +/* Local prototypes */ +static acpi_status +acpi_ns_check_package_list(struct acpi_predefined_data *data, + const union acpi_predefined_info *package, + union acpi_operand_object **elements, u32 count); + +static acpi_status +acpi_ns_check_package_elements(struct acpi_predefined_data *data, + union acpi_operand_object **elements, + u8 type1, + u32 count1, + u8 type2, u32 count2, u32 start_index); + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_package + * + * PARAMETERS: data - Pointer to validation data structure + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status + * + * DESCRIPTION: Check a returned package object for the correct count and + * correct type of all sub-objects. + * + ******************************************************************************/ + +acpi_status +acpi_ns_check_package(struct acpi_predefined_data *data, + union acpi_operand_object **return_object_ptr) +{ + union acpi_operand_object *return_object = *return_object_ptr; + const union acpi_predefined_info *package; + union acpi_operand_object **elements; + acpi_status status = AE_OK; + u32 expected_count; + u32 count; + u32 i; + + ACPI_FUNCTION_NAME(ns_check_package); + + /* The package info for this name is in the next table entry */ + + package = data->predefined + 1; + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, + "%s Validating return Package of Type %X, Count %X\n", + data->pathname, package->ret_info.type, + return_object->package.count)); + + /* + * For variable-length Packages, we can safely remove all embedded + * and trailing NULL package elements + */ + acpi_ns_remove_null_elements(data, package->ret_info.type, + return_object); + + /* Extract package count and elements array */ + + elements = return_object->package.elements; + count = return_object->package.count; + + /* The package must have at least one element, else invalid */ + + if (!count) { + ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + "Return Package has no elements (empty)")); + + return (AE_AML_OPERAND_VALUE); + } + + /* + * Decode the type of the expected package contents + * + * PTYPE1 packages contain no subpackages + * PTYPE2 packages contain sub-packages + */ + switch (package->ret_info.type) { + case ACPI_PTYPE1_FIXED: + + /* + * The package count is fixed and there are no sub-packages + * + * If package is too small, exit. + * If package is larger than expected, issue warning but continue + */ + expected_count = + package->ret_info.count1 + package->ret_info.count2; + if (count < expected_count) { + goto package_too_small; + } else if (count > expected_count) { + ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, + "%s: Return Package is larger than needed - " + "found %u, expected %u\n", + data->pathname, count, + expected_count)); + } + + /* Validate all elements of the returned package */ + + status = acpi_ns_check_package_elements(data, elements, + package->ret_info. + object_type1, + package->ret_info. + count1, + package->ret_info. + object_type2, + package->ret_info. + count2, 0); + break; + + case ACPI_PTYPE1_VAR: + + /* + * The package count is variable, there are no sub-packages, and all + * elements must be of the same type + */ + for (i = 0; i < count; i++) { + status = acpi_ns_check_object_type(data, elements, + package->ret_info. + object_type1, i); + if (ACPI_FAILURE(status)) { + return (status); + } + elements++; + } + break; + + case ACPI_PTYPE1_OPTION: + + /* + * The package count is variable, there are no sub-packages. There are + * a fixed number of required elements, and a variable number of + * optional elements. + * + * Check if package is at least as large as the minimum required + */ + expected_count = package->ret_info3.count; + if (count < expected_count) { + goto package_too_small; + } + + /* Variable number of sub-objects */ + + for (i = 0; i < count; i++) { + if (i < package->ret_info3.count) { + + /* These are the required package elements (0, 1, or 2) */ + + status = + acpi_ns_check_object_type(data, elements, + package-> + ret_info3. + object_type[i], + i); + if (ACPI_FAILURE(status)) { + return (status); + } + } else { + /* These are the optional package elements */ + + status = + acpi_ns_check_object_type(data, elements, + package-> + ret_info3. + tail_object_type, + i); + if (ACPI_FAILURE(status)) { + return (status); + } + } + elements++; + } + break; + + case ACPI_PTYPE2_REV_FIXED: + + /* First element is the (Integer) revision */ + + status = acpi_ns_check_object_type(data, elements, + ACPI_RTYPE_INTEGER, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + elements++; + count--; + + /* Examine the sub-packages */ + + status = + acpi_ns_check_package_list(data, package, elements, count); + break; + + case ACPI_PTYPE2_PKG_COUNT: + + /* First element is the (Integer) count of sub-packages to follow */ + + status = acpi_ns_check_object_type(data, elements, + ACPI_RTYPE_INTEGER, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * Count cannot be larger than the parent package length, but allow it + * to be smaller. The >= accounts for the Integer above. + */ + expected_count = (u32)(*elements)->integer.value; + if (expected_count >= count) { + goto package_too_small; + } + + count = expected_count; + elements++; + + /* Examine the sub-packages */ + + status = + acpi_ns_check_package_list(data, package, elements, count); + break; + + case ACPI_PTYPE2: + case ACPI_PTYPE2_FIXED: + case ACPI_PTYPE2_MIN: + case ACPI_PTYPE2_COUNT: + case ACPI_PTYPE2_FIX_VAR: + + /* + * These types all return a single Package that consists of a + * variable number of sub-Packages. + * + * First, ensure that the first element is a sub-Package. If not, + * the BIOS may have incorrectly returned the object as a single + * package instead of a Package of Packages (a common error if + * there is only one entry). We may be able to repair this by + * wrapping the returned Package with a new outer Package. + */ + if (*elements + && ((*elements)->common.type != ACPI_TYPE_PACKAGE)) { + + /* Create the new outer package and populate it */ + + status = + acpi_ns_wrap_with_package(data, return_object, + return_object_ptr); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Update locals to point to the new package (of 1 element) */ + + return_object = *return_object_ptr; + elements = return_object->package.elements; + count = 1; + } + + /* Examine the sub-packages */ + + status = + acpi_ns_check_package_list(data, package, elements, count); + break; + + default: + + /* Should not get here if predefined info table is correct */ + + ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + "Invalid internal return type in table entry: %X", + package->ret_info.type)); + + return (AE_AML_INTERNAL); + } + + return (status); + + package_too_small: + + /* Error exit for the case with an incorrect package count */ + + ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + "Return Package is too small - found %u elements, expected %u", + count, expected_count)); + + return (AE_AML_OPERAND_VALUE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_package_list + * + * PARAMETERS: data - Pointer to validation data structure + * package - Pointer to package-specific info for method + * elements - Element list of parent package. All elements + * of this list should be of type Package. + * count - Count of subpackages + * + * RETURN: Status + * + * DESCRIPTION: Examine a list of subpackages + * + ******************************************************************************/ + +static acpi_status +acpi_ns_check_package_list(struct acpi_predefined_data *data, + const union acpi_predefined_info *package, + union acpi_operand_object **elements, u32 count) +{ + union acpi_operand_object *sub_package; + union acpi_operand_object **sub_elements; + acpi_status status; + u32 expected_count; + u32 i; + u32 j; + + /* + * Validate each sub-Package in the parent Package + * + * NOTE: assumes list of sub-packages contains no NULL elements. + * Any NULL elements should have been removed by earlier call + * to acpi_ns_remove_null_elements. + */ + for (i = 0; i < count; i++) { + sub_package = *elements; + sub_elements = sub_package->package.elements; + data->parent_package = sub_package; + + /* Each sub-object must be of type Package */ + + status = acpi_ns_check_object_type(data, &sub_package, + ACPI_RTYPE_PACKAGE, i); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Examine the different types of expected sub-packages */ + + data->parent_package = sub_package; + switch (package->ret_info.type) { + case ACPI_PTYPE2: + case ACPI_PTYPE2_PKG_COUNT: + case ACPI_PTYPE2_REV_FIXED: + + /* Each subpackage has a fixed number of elements */ + + expected_count = + package->ret_info.count1 + package->ret_info.count2; + if (sub_package->package.count < expected_count) { + goto package_too_small; + } + + status = + acpi_ns_check_package_elements(data, sub_elements, + package->ret_info. + object_type1, + package->ret_info. + count1, + package->ret_info. + object_type2, + package->ret_info. + count2, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + break; + + case ACPI_PTYPE2_FIX_VAR: + /* + * Each subpackage has a fixed number of elements and an + * optional element + */ + expected_count = + package->ret_info.count1 + package->ret_info.count2; + if (sub_package->package.count < expected_count) { + goto package_too_small; + } + + status = + acpi_ns_check_package_elements(data, sub_elements, + package->ret_info. + object_type1, + package->ret_info. + count1, + package->ret_info. + object_type2, + sub_package->package. + count - + package->ret_info. + count1, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + break; + + case ACPI_PTYPE2_FIXED: + + /* Each sub-package has a fixed length */ + + expected_count = package->ret_info2.count; + if (sub_package->package.count < expected_count) { + goto package_too_small; + } + + /* Check the type of each sub-package element */ + + for (j = 0; j < expected_count; j++) { + status = + acpi_ns_check_object_type(data, + &sub_elements[j], + package-> + ret_info2. + object_type[j], + j); + if (ACPI_FAILURE(status)) { + return (status); + } + } + break; + + case ACPI_PTYPE2_MIN: + + /* Each sub-package has a variable but minimum length */ + + expected_count = package->ret_info.count1; + if (sub_package->package.count < expected_count) { + goto package_too_small; + } + + /* Check the type of each sub-package element */ + + status = + acpi_ns_check_package_elements(data, sub_elements, + package->ret_info. + object_type1, + sub_package->package. + count, 0, 0, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + break; + + case ACPI_PTYPE2_COUNT: + + /* + * First element is the (Integer) count of elements, including + * the count field (the ACPI name is num_elements) + */ + status = acpi_ns_check_object_type(data, sub_elements, + ACPI_RTYPE_INTEGER, + 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * Make sure package is large enough for the Count and is + * is as large as the minimum size + */ + expected_count = (u32)(*sub_elements)->integer.value; + if (sub_package->package.count < expected_count) { + goto package_too_small; + } + if (sub_package->package.count < + package->ret_info.count1) { + expected_count = package->ret_info.count1; + goto package_too_small; + } + if (expected_count == 0) { + /* + * Either the num_entries element was originally zero or it was + * a NULL element and repaired to an Integer of value zero. + * In either case, repair it by setting num_entries to be the + * actual size of the subpackage. + */ + expected_count = sub_package->package.count; + (*sub_elements)->integer.value = expected_count; + } + + /* Check the type of each sub-package element */ + + status = + acpi_ns_check_package_elements(data, + (sub_elements + 1), + package->ret_info. + object_type1, + (expected_count - 1), + 0, 0, 1); + if (ACPI_FAILURE(status)) { + return (status); + } + break; + + default: /* Should not get here, type was validated by caller */ + + return (AE_AML_INTERNAL); + } + + elements++; + } + + return (AE_OK); + + package_too_small: + + /* The sub-package count was smaller than required */ + + ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + "Return Sub-Package[%u] is too small - found %u elements, expected %u", + i, sub_package->package.count, expected_count)); + + return (AE_AML_OPERAND_VALUE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ns_check_package_elements + * + * PARAMETERS: data - Pointer to validation data structure + * elements - Pointer to the package elements array + * type1 - Object type for first group + * count1 - Count for first group + * type2 - Object type for second group + * count2 - Count for second group + * start_index - Start of the first group of elements + * + * RETURN: Status + * + * DESCRIPTION: Check that all elements of a package are of the correct object + * type. Supports up to two groups of different object types. + * + ******************************************************************************/ + +static acpi_status +acpi_ns_check_package_elements(struct acpi_predefined_data *data, + union acpi_operand_object **elements, + u8 type1, + u32 count1, + u8 type2, u32 count2, u32 start_index) +{ + union acpi_operand_object **this_element = elements; + acpi_status status; + u32 i; + + /* + * Up to two groups of package elements are supported by the data + * structure. All elements in each group must be of the same type. + * The second group can have a count of zero. + */ + for (i = 0; i < count1; i++) { + status = acpi_ns_check_object_type(data, this_element, + type1, i + start_index); + if (ACPI_FAILURE(status)) { + return (status); + } + this_element++; + } + + for (i = 0; i < count2; i++) { + status = acpi_ns_check_object_type(data, this_element, + type2, + (i + count1 + start_index)); + if (ACPI_FAILURE(status)) { + return (status); + } + this_element++; + } + + return (AE_OK); +} |