diff options
Diffstat (limited to 'drivers/char')
-rw-r--r-- | drivers/char/Kconfig | 4 | ||||
-rw-r--r-- | drivers/char/istallion.c | 107 | ||||
-rw-r--r-- | drivers/char/stallion.c | 105 |
3 files changed, 123 insertions, 93 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index caff851..700ff96 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -350,7 +350,7 @@ config STALDRV config STALLION tristate "Stallion EasyIO or EC8/32 support" - depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI) + depends on STALDRV && (ISA || EISA || PCI) help If you have an EasyIO or EasyConnection 8/32 multiport Stallion card, then this is for you; say Y. Make sure to read @@ -361,7 +361,7 @@ config STALLION config ISTALLION tristate "Stallion EC8/64, ONboard, Brumby support" - depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI) + depends on STALDRV && (ISA || EISA || PCI) help If you have an EasyConnection 8/64, ONboard, Brumby or Stallion serial multiport card, say Y here. Make sure to read diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 843a2af..96ee112 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -623,24 +623,25 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp); static void stli_poll(unsigned long arg); static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); -static int stli_initopen(struct stlibrd *brdp, struct stliport *portp); +static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp); static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait); -static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp); -static int stli_setport(struct stliport *portp); +static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp, + struct stliport *portp, struct file *filp); +static int stli_setport(struct tty_struct *tty); static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback); static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp); -static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp); +static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, asyport_t *pp, struct ktermios *tiosp); static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts); static long stli_mktiocm(unsigned long sigvalue); static void stli_read(struct stlibrd *brdp, struct stliport *portp); static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp); -static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp); +static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp); static int stli_getbrdstats(combrd_t __user *bp); -static int stli_getportstats(struct stliport *portp, comstats_t __user *cp); -static int stli_portcmdstats(struct stliport *portp); +static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, comstats_t __user *cp); +static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp); static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp); static int stli_getportstruct(struct stliport __user *arg); static int stli_getbrdstruct(struct stlibrd __user *arg); @@ -731,12 +732,16 @@ static void stli_cleanup_ports(struct stlibrd *brdp) { struct stliport *portp; unsigned int j; + struct tty_struct *tty; for (j = 0; j < STL_MAXPORTS; j++) { portp = brdp->ports[j]; if (portp != NULL) { - if (portp->port.tty != NULL) - tty_hangup(portp->port.tty); + tty = tty_port_tty_get(&portp->port); + if (tty != NULL) { + tty_hangup(tty); + tty_kref_put(tty); + } kfree(portp); } } @@ -824,7 +829,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) * requires several commands to the board we will need to wait for any * other open that is already initializing the port. */ - portp->port.tty = tty; + tty_port_tty_set(&portp->port, tty); tty->driver_data = portp; portp->port.count++; @@ -835,7 +840,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { set_bit(ST_INITIALIZING, &portp->state); - if ((rc = stli_initopen(brdp, portp)) >= 0) { + if ((rc = stli_initopen(tty, brdp, portp)) >= 0) { portp->port.flags |= ASYNC_INITIALIZED; clear_bit(TTY_IO_ERROR, &tty->flags); } @@ -864,7 +869,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp) * then also we might have to wait for carrier. */ if (!(filp->f_flags & O_NONBLOCK)) { - if ((rc = stli_waitcarrier(brdp, portp, filp)) != 0) + if ((rc = stli_waitcarrier(tty, brdp, portp, filp)) != 0) return rc; } portp->port.flags |= ASYNC_NORMAL_ACTIVE; @@ -930,7 +935,7 @@ static void stli_close(struct tty_struct *tty, struct file *filp) stli_flushbuffer(tty); tty->closing = 0; - portp->port.tty = NULL; + tty_port_tty_set(&portp->port, NULL); if (portp->openwaitcnt) { if (portp->close_delay) @@ -952,9 +957,9 @@ static void stli_close(struct tty_struct *tty, struct file *filp) * this still all happens pretty quickly. */ -static int stli_initopen(struct stlibrd *brdp, struct stliport *portp) +static int stli_initopen(struct tty_struct *tty, + struct stlibrd *brdp, struct stliport *portp) { - struct tty_struct *tty; asynotify_t nt; asyport_t aport; int rc; @@ -969,10 +974,7 @@ static int stli_initopen(struct stlibrd *brdp, struct stliport *portp) sizeof(asynotify_t), 0)) < 0) return rc; - tty = portp->port.tty; - if (tty == NULL) - return -ENODEV; - stli_mkasyport(portp, &aport, tty->termios); + stli_mkasyport(tty, portp, &aport, tty->termios); if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0)) < 0) return rc; @@ -1161,22 +1163,21 @@ static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned l * waiting for the command to complete - so must have user context. */ -static int stli_setport(struct stliport *portp) +static int stli_setport(struct tty_struct *tty) { + struct stliport *portp = tty->driver_data; struct stlibrd *brdp; asyport_t aport; if (portp == NULL) return -ENODEV; - if (portp->port.tty == NULL) - return -ENODEV; if (portp->brdnr >= stli_nrbrds) return -ENODEV; brdp = stli_brds[portp->brdnr]; if (brdp == NULL) return -ENODEV; - stli_mkasyport(portp, &aport, portp->port.tty->termios); + stli_mkasyport(tty, portp, &aport, tty->termios); return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0)); } @@ -1187,7 +1188,8 @@ static int stli_setport(struct stliport *portp) * maybe because if we are clocal then we don't need to wait... */ -static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp) +static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp, + struct stliport *portp, struct file *filp) { unsigned long flags; int rc, doclocal; @@ -1195,7 +1197,7 @@ static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct rc = 0; doclocal = 0; - if (portp->port.tty->termios->c_cflag & CLOCAL) + if (tty->termios->c_cflag & CLOCAL) doclocal++; spin_lock_irqsave(&stli_lock, flags); @@ -1572,10 +1574,11 @@ static int stli_getserial(struct stliport *portp, struct serial_struct __user *s * just quietly ignore any requests to change irq, etc. */ -static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp) +static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp) { struct serial_struct sio; int rc; + struct stliport *portp = tty->driver_data; if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) return -EFAULT; @@ -1594,7 +1597,7 @@ static int stli_setserial(struct stliport *portp, struct serial_struct __user *s portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; - if ((rc = stli_setport(portp)) < 0) + if ((rc = stli_setport(tty)) < 0) return rc; return 0; } @@ -1685,17 +1688,17 @@ static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cm rc = stli_getserial(portp, argp); break; case TIOCSSERIAL: - rc = stli_setserial(portp, argp); + rc = stli_setserial(tty, argp); break; case STL_GETPFLAG: rc = put_user(portp->pflag, (unsigned __user *)argp); break; case STL_SETPFLAG: if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0) - stli_setport(portp); + stli_setport(tty); break; case COM_GETPORTSTATS: - rc = stli_getportstats(portp, argp); + rc = stli_getportstats(tty, portp, argp); break; case COM_CLRPORTSTATS: rc = stli_clrportstats(portp, argp); @@ -1742,7 +1745,7 @@ static void stli_settermios(struct tty_struct *tty, struct ktermios *old) tiosp = tty->termios; - stli_mkasyport(portp, &aport, tiosp); + stli_mkasyport(tty, portp, &aport, tiosp); stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0); stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1); stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, @@ -1854,7 +1857,7 @@ static void stli_hangup(struct tty_struct *tty) clear_bit(ST_TXBUSY, &portp->state); clear_bit(ST_RXSTOP, &portp->state); set_bit(TTY_IO_ERROR, &tty->flags); - portp->port.tty = NULL; + tty_port_tty_set(&portp->port, NULL); portp->port.flags &= ~ASYNC_NORMAL_ACTIVE; portp->port.count = 0; spin_unlock_irqrestore(&stli_lock, flags); @@ -1998,7 +2001,7 @@ static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portn char *sp, *uart; int rc, cnt; - rc = stli_portcmdstats(portp); + rc = stli_portcmdstats(NULL, portp); uart = "UNKNOWN"; if (brdp->state & BST_STARTED) { @@ -2188,7 +2191,7 @@ static void stli_read(struct stlibrd *brdp, struct stliport *portp) if (test_bit(ST_RXSTOP, &portp->state)) return; - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); if (tty == NULL) return; @@ -2230,6 +2233,7 @@ static void stli_read(struct stlibrd *brdp, struct stliport *portp) set_bit(ST_RXING, &portp->state); tty_schedule_flip(tty); + tty_kref_put(tty); } /*****************************************************************************/ @@ -2362,7 +2366,7 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp) if (ap->notify) { nt = ap->changed; ap->notify = 0; - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); if (nt.signal & SG_DCD) { oldsigs = portp->sigs; @@ -2399,6 +2403,7 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp) tty_schedule_flip(tty); } } + tty_kref_put(tty); if (nt.data & DT_RXBUSY) { donerx++; @@ -2535,14 +2540,15 @@ static void stli_poll(unsigned long arg) * the slave. */ -static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp) +static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, + asyport_t *pp, struct ktermios *tiosp) { memset(pp, 0, sizeof(asyport_t)); /* * Start of by setting the baud, char size, parity and stop bit info. */ - pp->baudout = tty_get_baud_rate(portp->port.tty); + pp->baudout = tty_get_baud_rate(tty); if ((tiosp->c_cflag & CBAUD) == B38400) { if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) pp->baudout = 57600; @@ -2695,7 +2701,7 @@ static int stli_initports(struct stlibrd *brdp) printk("STALLION: failed to allocate port structure\n"); continue; } - + tty_port_init(&portp->port); portp->magic = STLI_PORTMAGIC; portp->portnr = i; portp->brdnr = brdp->brdnr; @@ -4220,7 +4226,7 @@ static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, * what port to get stats for (used through board control device). */ -static int stli_portcmdstats(struct stliport *portp) +static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp) { unsigned long flags; struct stlibrd *brdp; @@ -4249,15 +4255,15 @@ static int stli_portcmdstats(struct stliport *portp) stli_comstats.flags = portp->port.flags; spin_lock_irqsave(&brd_lock, flags); - if (portp->port.tty != NULL) { - if (portp->port.tty->driver_data == portp) { - stli_comstats.ttystate = portp->port.tty->flags; + if (tty != NULL) { + if (portp->port.tty == tty) { + stli_comstats.ttystate = tty->flags; stli_comstats.rxbuffered = -1; - if (portp->port.tty->termios != NULL) { - stli_comstats.cflags = portp->port.tty->termios->c_cflag; - stli_comstats.iflags = portp->port.tty->termios->c_iflag; - stli_comstats.oflags = portp->port.tty->termios->c_oflag; - stli_comstats.lflags = portp->port.tty->termios->c_lflag; + if (tty->termios != NULL) { + stli_comstats.cflags = tty->termios->c_cflag; + stli_comstats.iflags = tty->termios->c_iflag; + stli_comstats.oflags = tty->termios->c_oflag; + stli_comstats.lflags = tty->termios->c_lflag; } } } @@ -4294,7 +4300,8 @@ static int stli_portcmdstats(struct stliport *portp) * what port to get stats for (used through board control device). */ -static int stli_getportstats(struct stliport *portp, comstats_t __user *cp) +static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, + comstats_t __user *cp) { struct stlibrd *brdp; int rc; @@ -4312,7 +4319,7 @@ static int stli_getportstats(struct stliport *portp, comstats_t __user *cp) if (!brdp) return -ENODEV; - if ((rc = stli_portcmdstats(portp)) < 0) + if ((rc = stli_portcmdstats(tty, portp)) < 0) return rc; return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ? @@ -4427,7 +4434,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un switch (cmd) { case COM_GETPORTSTATS: - rc = stli_getportstats(NULL, argp); + rc = stli_getportstats(NULL, NULL, argp); done++; break; case COM_CLRPORTSTATS: diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 19db1eb..81b3234 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -405,9 +405,9 @@ static unsigned int stl_baudrates[] = { static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); static int stl_brdinit(struct stlbrd *brdp); -static int stl_getportstats(struct stlport *portp, comstats_t __user *cp); +static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); -static int stl_waitcarrier(struct stlport *portp, struct file *filp); +static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, struct file *filp); /* * CD1400 uart specific handling functions. @@ -612,8 +612,9 @@ static struct class *stallion_class; static void stl_cd_change(struct stlport *portp) { unsigned int oldsigs = portp->sigs; + struct tty_struct *tty = tty_port_tty_get(&portp->port); - if (!portp->port.tty) + if (!tty) return; portp->sigs = stl_getsignals(portp); @@ -623,7 +624,8 @@ static void stl_cd_change(struct stlport *portp) if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) if (portp->port.flags & ASYNC_CHECK_CD) - tty_hangup(portp->port.tty); + tty_hangup(tty); + tty_kref_put(tty); } /* @@ -734,7 +736,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp) * On the first open of the device setup the port hardware, and * initialize the per port data structure. */ - portp->port.tty = tty; + tty_port_tty_set(&portp->port, tty); tty->driver_data = portp; portp->port.count++; @@ -774,7 +776,7 @@ static int stl_open(struct tty_struct *tty, struct file *filp) * then also we might have to wait for carrier. */ if (!(filp->f_flags & O_NONBLOCK)) - if ((rc = stl_waitcarrier(portp, filp)) != 0) + if ((rc = stl_waitcarrier(tty, portp, filp)) != 0) return rc; portp->port.flags |= ASYNC_NORMAL_ACTIVE; @@ -789,7 +791,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp) * maybe because if we are clocal then we don't need to wait... */ -static int stl_waitcarrier(struct stlport *portp, struct file *filp) +static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, + struct file *filp) { unsigned long flags; int rc, doclocal; @@ -801,7 +804,7 @@ static int stl_waitcarrier(struct stlport *portp, struct file *filp) spin_lock_irqsave(&stallion_lock, flags); - if (portp->port.tty->termios->c_cflag & CLOCAL) + if (tty->termios->c_cflag & CLOCAL) doclocal++; portp->openwaitcnt++; @@ -949,7 +952,7 @@ static void stl_close(struct tty_struct *tty, struct file *filp) tty_ldisc_flush(tty); tty->closing = 0; - portp->port.tty = NULL; + tty_port_tty_set(&portp->port, NULL); if (portp->openwaitcnt) { if (portp->close_delay) @@ -1183,8 +1186,9 @@ static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp) * just quietly ignore any requests to change irq, etc. */ -static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp) +static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp) { + struct stlport * portp = tty->driver_data; struct serial_struct sio; pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp); @@ -1205,7 +1209,7 @@ static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp) portp->close_delay = sio.close_delay; portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; - stl_setport(portp, portp->port.tty->termios); + stl_setport(portp, tty->termios); return 0; } @@ -1282,10 +1286,10 @@ static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd rc = stl_getserial(portp, argp); break; case TIOCSSERIAL: - rc = stl_setserial(portp, argp); + rc = stl_setserial(tty, argp); break; case COM_GETPORTSTATS: - rc = stl_getportstats(portp, argp); + rc = stl_getportstats(tty, portp, argp); break; case COM_CLRPORTSTATS: rc = stl_clrportstats(portp, argp); @@ -1452,7 +1456,7 @@ static void stl_hangup(struct tty_struct *tty) portp->tx.head = NULL; portp->tx.tail = NULL; } - portp->port.tty = NULL; + tty_port_tty_set(&portp->port, NULL); portp->port.flags &= ~ASYNC_NORMAL_ACTIVE; portp->port.count = 0; wake_up_interruptible(&portp->port.open_wait); @@ -1805,7 +1809,7 @@ static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp) "(size=%Zd)\n", sizeof(struct stlport)); break; } - + tty_port_init(&portp->port); portp->magic = STL_PORTMAGIC; portp->portnr = i; portp->brdnr = panelp->brdnr; @@ -1832,6 +1836,7 @@ static void stl_cleanup_panels(struct stlbrd *brdp) struct stlpanel *panelp; struct stlport *portp; unsigned int j, k; + struct tty_struct *tty; for (j = 0; j < STL_MAXPANELS; j++) { panelp = brdp->panels[j]; @@ -1841,8 +1846,11 @@ static void stl_cleanup_panels(struct stlbrd *brdp) portp = panelp->ports[k]; if (portp == NULL) continue; - if (portp->port.tty != NULL) - stl_hangup(portp->port.tty); + tty = tty_port_tty_get(&portp->port); + if (tty != NULL) { + stl_hangup(tty); + tty_kref_put(tty); + } kfree(portp->tx.buf); kfree(portp); } @@ -2498,7 +2506,7 @@ static struct stlport *stl_getport(int brdnr, int panelnr, int portnr) * what port to get stats for (used through board control device). */ -static int stl_getportstats(struct stlport *portp, comstats_t __user *cp) +static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp) { comstats_t stl_comstats; unsigned char *head, *tail; @@ -2525,18 +2533,17 @@ static int stl_getportstats(struct stlport *portp, comstats_t __user *cp) portp->stats.rxbuffered = 0; spin_lock_irqsave(&stallion_lock, flags); - if (portp->port.tty != NULL) - if (portp->port.tty->driver_data == portp) { - portp->stats.ttystate = portp->port.tty->flags; - /* No longer available as a statistic */ - portp->stats.rxbuffered = 1; /*portp->port.tty->flip.count; */ - if (portp->port.tty->termios != NULL) { - portp->stats.cflags = portp->port.tty->termios->c_cflag; - portp->stats.iflags = portp->port.tty->termios->c_iflag; - portp->stats.oflags = portp->port.tty->termios->c_oflag; - portp->stats.lflags = portp->port.tty->termios->c_lflag; - } + if (tty != NULL && portp->port.tty == tty) { + portp->stats.ttystate = tty->flags; + /* No longer available as a statistic */ + portp->stats.rxbuffered = 1; /*tty->flip.count; */ + if (tty->termios != NULL) { + portp->stats.cflags = tty->termios->c_cflag; + portp->stats.iflags = tty->termios->c_iflag; + portp->stats.oflags = tty->termios->c_oflag; + portp->stats.lflags = tty->termios->c_lflag; } + } spin_unlock_irqrestore(&stallion_lock, flags); head = portp->tx.head; @@ -2640,7 +2647,7 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns switch (cmd) { case COM_GETPORTSTATS: - rc = stl_getportstats(NULL, argp); + rc = stl_getportstats(NULL, NULL, argp); break; case COM_CLRPORTSTATS: rc = stl_clrportstats(NULL, argp); @@ -3243,7 +3250,7 @@ static void stl_cd1400flowctrl(struct stlport *portp, int state) if (portp == NULL) return; - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); if (tty == NULL) return; @@ -3288,6 +3295,7 @@ static void stl_cd1400flowctrl(struct stlport *portp, int state) BRDDISABLE(portp->brdnr); spin_unlock_irqrestore(&brd_lock, flags); + tty_kref_put(tty); } /*****************************************************************************/ @@ -3305,7 +3313,7 @@ static void stl_cd1400sendflow(struct stlport *portp, int state) if (portp == NULL) return; - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); if (tty == NULL) return; @@ -3325,6 +3333,7 @@ static void stl_cd1400sendflow(struct stlport *portp, int state) } BRDDISABLE(portp->brdnr); spin_unlock_irqrestore(&brd_lock, flags); + tty_kref_put(tty); } /*****************************************************************************/ @@ -3478,6 +3487,7 @@ static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) int len, stlen; char *head, *tail; unsigned char ioack, srer; + struct tty_struct *tty; pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr); @@ -3504,8 +3514,11 @@ static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr) if ((len == 0) || ((len < STL_TXBUFLOW) && (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { set_bit(ASYI_TXLOW, &portp->istate); - if (portp->port.tty) - tty_wakeup(portp->port.tty); + tty = tty_port_tty_get(&portp->port); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } } if (len == 0) { @@ -3569,7 +3582,7 @@ static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr) return; } portp = panelp->ports[(ioack >> 3)]; - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) { outb((RDCR + portp->uartaddr), ioaddr); @@ -3633,10 +3646,12 @@ static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr) } } else { printk("STALLION: bad RX interrupt ack value=%x\n", ioack); + tty_kref_put(tty); return; } stl_rxalldone: + tty_kref_put(tty); outb((EOSRR + portp->uartaddr), ioaddr); outb(0, (ioaddr + EREG_DATA)); } @@ -4175,7 +4190,7 @@ static void stl_sc26198flowctrl(struct stlport *portp, int state) if (portp == NULL) return; - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); if (tty == NULL) return; @@ -4226,6 +4241,7 @@ static void stl_sc26198flowctrl(struct stlport *portp, int state) BRDDISABLE(portp->brdnr); spin_unlock_irqrestore(&brd_lock, flags); + tty_kref_put(tty); } /*****************************************************************************/ @@ -4244,7 +4260,7 @@ static void stl_sc26198sendflow(struct stlport *portp, int state) if (portp == NULL) return; - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); if (tty == NULL) return; @@ -4269,6 +4285,7 @@ static void stl_sc26198sendflow(struct stlport *portp, int state) } BRDDISABLE(portp->brdnr); spin_unlock_irqrestore(&brd_lock, flags); + tty_kref_put(tty); } /*****************************************************************************/ @@ -4408,6 +4425,7 @@ static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase) static void stl_sc26198txisr(struct stlport *portp) { + struct tty_struct *tty; unsigned int ioaddr; unsigned char mr0; int len, stlen; @@ -4422,8 +4440,11 @@ static void stl_sc26198txisr(struct stlport *portp) if ((len == 0) || ((len < STL_TXBUFLOW) && (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { set_bit(ASYI_TXLOW, &portp->istate); - if (portp->port.tty) - tty_wakeup(portp->port.tty); + tty = tty_port_tty_get(&portp->port); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } } if (len == 0) { @@ -4476,7 +4497,7 @@ static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack) pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack); - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); ioaddr = portp->ioaddr; outb(GIBCR, (ioaddr + XP_ADDR)); len = inb(ioaddr + XP_DATA) + 1; @@ -4515,6 +4536,7 @@ static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack) stl_sc26198txunflow(portp, tty); } } + tty_kref_put(tty); } /*****************************************************************************/ @@ -4528,7 +4550,7 @@ static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char struct tty_struct *tty; unsigned int ioaddr; - tty = portp->port.tty; + tty = tty_port_tty_get(&portp->port); ioaddr = portp->ioaddr; if (status & SR_RXPARITY) @@ -4566,6 +4588,7 @@ static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char if (status == 0) portp->stats.rxtotal++; } + tty_kref_put(tty); } /*****************************************************************************/ |