diff options
Diffstat (limited to 'drivers/clocksource')
-rw-r--r-- | drivers/clocksource/Kconfig | 1 | ||||
-rw-r--r-- | drivers/clocksource/arm_arch_timer.c | 2 | ||||
-rw-r--r-- | drivers/clocksource/arm_global_timer.c | 3 | ||||
-rw-r--r-- | drivers/clocksource/bcm2835_timer.c | 4 | ||||
-rw-r--r-- | drivers/clocksource/clksrc-dbx500-prcmu.c | 5 | ||||
-rw-r--r-- | drivers/clocksource/clksrc-of.c | 4 | ||||
-rw-r--r-- | drivers/clocksource/dw_apb_timer_of.c | 16 | ||||
-rw-r--r-- | drivers/clocksource/em_sti.c | 2 | ||||
-rw-r--r-- | drivers/clocksource/exynos_mct.c | 10 | ||||
-rw-r--r-- | drivers/clocksource/mxs_timer.c | 4 | ||||
-rw-r--r-- | drivers/clocksource/nomadik-mtu.c | 4 | ||||
-rw-r--r-- | drivers/clocksource/samsung_pwm_timer.c | 4 | ||||
-rw-r--r-- | drivers/clocksource/tegra20_timer.c | 8 | ||||
-rw-r--r-- | drivers/clocksource/time-armada-370-xp.c | 4 | ||||
-rw-r--r-- | drivers/clocksource/timer-prima2.c | 6 | ||||
-rw-r--r-- | drivers/clocksource/vf_pit_timer.c | 4 | ||||
-rw-r--r-- | drivers/clocksource/vt8500_timer.c | 2 |
17 files changed, 44 insertions, 39 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 559d803..5e940f8 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -26,6 +26,7 @@ config DW_APB_TIMER_OF config ARMADA_370_XP_TIMER bool + select CLKSRC_OF config ORION_TIMER select CLKSRC_OF diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 9338f1a..b94b0d4 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -405,7 +405,7 @@ static struct clocksource clocksource_counter = { .rating = 400, .read = arch_counter_read, .mask = CLOCKSOURCE_MASK(56), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP, }; static struct cyclecounter cyclecounter = { diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c index b66c1f3..c639b1a 100644 --- a/drivers/clocksource/arm_global_timer.c +++ b/drivers/clocksource/arm_global_timer.c @@ -169,7 +169,8 @@ static int gt_clockevents_init(struct clock_event_device *clk) int cpu = smp_processor_id(); clk->name = "arm_global_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERCPU; clk->set_mode = gt_clockevent_set_mode; clk->set_next_event = gt_clockevent_set_next_event; clk->cpumask = cpumask_of(cpu); diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c index 07ea7ce..26ed331 100644 --- a/drivers/clocksource/bcm2835_timer.c +++ b/drivers/clocksource/bcm2835_timer.c @@ -49,7 +49,7 @@ struct bcm2835_timer { static void __iomem *system_clock __read_mostly; -static u32 notrace bcm2835_sched_read(void) +static u64 notrace bcm2835_sched_read(void) { return readl_relaxed(system_clock); } @@ -110,7 +110,7 @@ static void __init bcm2835_timer_init(struct device_node *node) panic("Can't read clock-frequency"); system_clock = base + REG_COUNTER_LO; - setup_sched_clock(bcm2835_sched_read, 32, freq); + sched_clock_register(bcm2835_sched_read, 32, freq); clocksource_mmio_init(base + REG_COUNTER_LO, node->name, freq, 300, 32, clocksource_mmio_readl_up); diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c index a9fd4ad..b375106 100644 --- a/drivers/clocksource/clksrc-dbx500-prcmu.c +++ b/drivers/clocksource/clksrc-dbx500-prcmu.c @@ -53,7 +53,7 @@ static struct clocksource clocksource_dbx500_prcmu = { #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK -static u32 notrace dbx500_prcmu_sched_clock_read(void) +static u64 notrace dbx500_prcmu_sched_clock_read(void) { if (unlikely(!clksrc_dbx500_timer_base)) return 0; @@ -81,8 +81,7 @@ void __init clksrc_dbx500_prcmu_init(void __iomem *base) clksrc_dbx500_timer_base + PRCMU_TIMER_REF); } #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK - setup_sched_clock(dbx500_prcmu_sched_clock_read, - 32, RATE_32K); + sched_clock_register(dbx500_prcmu_sched_clock_read, 32, RATE_32K); #endif clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K); } diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c index 37f5325..35639cf4 100644 --- a/drivers/clocksource/clksrc-of.c +++ b/drivers/clocksource/clksrc-of.c @@ -30,7 +30,11 @@ void __init clocksource_of_init(void) clocksource_of_init_fn init_func; for_each_matching_node_and_match(np, __clksrc_of_table, &match) { + if (!of_device_is_available(np)) + continue; + init_func = match->data; init_func(np); + of_node_put(np); } } diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index 4cbae4f..45ba8ae 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -23,7 +23,7 @@ #include <linux/clk.h> #include <linux/sched_clock.h> -static void timer_get_base_and_rate(struct device_node *np, +static void __init timer_get_base_and_rate(struct device_node *np, void __iomem **base, u32 *rate) { struct clk *timer_clk; @@ -55,11 +55,11 @@ static void timer_get_base_and_rate(struct device_node *np, try_clock_freq: if (of_property_read_u32(np, "clock-freq", rate) && - of_property_read_u32(np, "clock-frequency", rate)) + of_property_read_u32(np, "clock-frequency", rate)) panic("No clock nor clock-frequency property for %s", np->name); } -static void add_clockevent(struct device_node *event_timer) +static void __init add_clockevent(struct device_node *event_timer) { void __iomem *iobase; struct dw_apb_clock_event_device *ced; @@ -82,7 +82,7 @@ static void add_clockevent(struct device_node *event_timer) static void __iomem *sched_io_base; static u32 sched_rate; -static void add_clocksource(struct device_node *source_timer) +static void __init add_clocksource(struct device_node *source_timer) { void __iomem *iobase; struct dw_apb_clocksource *cs; @@ -106,7 +106,7 @@ static void add_clocksource(struct device_node *source_timer) sched_rate = rate; } -static u32 read_sched_clock(void) +static u64 read_sched_clock(void) { return __raw_readl(sched_io_base); } @@ -117,7 +117,7 @@ static const struct of_device_id sptimer_ids[] __initconst = { { /* Sentinel */ }, }; -static void init_sched_clock(void) +static void __init init_sched_clock(void) { struct device_node *sched_timer; @@ -128,7 +128,7 @@ static void init_sched_clock(void) of_node_put(sched_timer); } - setup_sched_clock(read_sched_clock, 32, sched_rate); + sched_clock_register(read_sched_clock, 32, sched_rate); } static int num_called; @@ -138,12 +138,10 @@ static void __init dw_apb_timer_init(struct device_node *timer) case 0: pr_debug("%s: found clockevent timer\n", __func__); add_clockevent(timer); - of_node_put(timer); break; case 1: pr_debug("%s: found clocksource timer\n", __func__); add_clocksource(timer); - of_node_put(timer); init_sched_clock(); break; default: diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c index b9c81b7..3a5909c 100644 --- a/drivers/clocksource/em_sti.c +++ b/drivers/clocksource/em_sti.c @@ -301,7 +301,7 @@ static void em_sti_register_clockevent(struct em_sti_priv *p) ced->name = dev_name(&p->pdev->dev); ced->features = CLOCK_EVT_FEAT_ONESHOT; ced->rating = 200; - ced->cpumask = cpumask_of(0); + ced->cpumask = cpu_possible_mask; ced->set_next_event = em_sti_clock_event_next; ced->set_mode = em_sti_clock_event_mode; diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 5b34768..62b0de6 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -428,7 +428,6 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt) evt->irq); return -EIO; } - irq_set_affinity(evt->irq, cpumask_of(cpu)); } else { enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0); } @@ -449,6 +448,7 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { struct mct_clock_event_device *mevt; + unsigned int cpu; /* * Grab cpu pointer in each case to avoid spurious @@ -459,6 +459,12 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self, mevt = this_cpu_ptr(&percpu_mct_tick); exynos4_local_timer_setup(&mevt->evt); break; + case CPU_ONLINE: + cpu = (unsigned long)hcpu; + if (mct_int_type == MCT_INT_SPI) + irq_set_affinity(mct_irqs[MCT_L0_IRQ + cpu], + cpumask_of(cpu)); + break; case CPU_DYING: mevt = this_cpu_ptr(&percpu_mct_tick); exynos4_local_timer_stop(&mevt->evt); @@ -500,6 +506,8 @@ static void __init exynos4_timer_resources(struct device_node *np, void __iomem &percpu_mct_tick); WARN(err, "MCT: can't request IRQ %d (%d)\n", mct_irqs[MCT_L0_IRQ], err); + } else { + irq_set_affinity(mct_irqs[MCT_L0_IRQ], cpumask_of(0)); } err = register_cpu_notifier(&exynos4_mct_cpu_nb); diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c index 0f5e65f..445b68a 100644 --- a/drivers/clocksource/mxs_timer.c +++ b/drivers/clocksource/mxs_timer.c @@ -222,7 +222,7 @@ static struct clocksource clocksource_mxs = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static u32 notrace mxs_read_sched_clock_v2(void) +static u64 notrace mxs_read_sched_clock_v2(void) { return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); } @@ -236,7 +236,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk) else { clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); - setup_sched_clock(mxs_read_sched_clock_v2, 32, c); + sched_clock_register(mxs_read_sched_clock_v2, 32, c); } return 0; diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index 1b74bea..ed7b73b 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -76,7 +76,7 @@ static struct delay_timer mtu_delay_timer; * local implementation which uses the clocksource to get some * better resolution when scheduling the kernel. */ -static u32 notrace nomadik_read_sched_clock(void) +static u64 notrace nomadik_read_sched_clock(void) { if (unlikely(!mtu_base)) return 0; @@ -231,7 +231,7 @@ static void __init __nmdk_timer_init(void __iomem *base, int irq, "mtu_0"); #ifdef CONFIG_CLKSRC_NOMADIK_MTU_SCHED_CLOCK - setup_sched_clock(nomadik_read_sched_clock, 32, rate); + sched_clock_register(nomadik_read_sched_clock, 32, rate); #endif /* Timer 1 is used for events, register irq and clockevents */ diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c index ab29476..85082e8 100644 --- a/drivers/clocksource/samsung_pwm_timer.c +++ b/drivers/clocksource/samsung_pwm_timer.c @@ -331,7 +331,7 @@ static struct clocksource samsung_clocksource = { * this wraps around for now, since it is just a relative time * stamp. (Inspired by U300 implementation.) */ -static u32 notrace samsung_read_sched_clock(void) +static u64 notrace samsung_read_sched_clock(void) { return samsung_clocksource_read(NULL); } @@ -357,7 +357,7 @@ static void __init samsung_clocksource_init(void) else pwm.source_reg = pwm.base + pwm.source_id * 0x0c + 0x14; - setup_sched_clock(samsung_read_sched_clock, + sched_clock_register(samsung_read_sched_clock, pwm.variant.bits, clock_rate); samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits); diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c index 9396170..6428492 100644 --- a/drivers/clocksource/tegra20_timer.c +++ b/drivers/clocksource/tegra20_timer.c @@ -98,7 +98,7 @@ static struct clock_event_device tegra_clockevent = { .set_mode = tegra_timer_set_mode, }; -static u32 notrace tegra_read_sched_clock(void) +static u64 notrace tegra_read_sched_clock(void) { return timer_readl(TIMERUS_CNTR_1US); } @@ -181,8 +181,6 @@ static void __init tegra20_init_timer(struct device_node *np) rate = clk_get_rate(clk); } - of_node_put(np); - switch (rate) { case 12000000: timer_writel(0x000b, TIMERUS_USEC_CFG); @@ -200,7 +198,7 @@ static void __init tegra20_init_timer(struct device_node *np) WARN(1, "Unknown clock rate"); } - setup_sched_clock(tegra_read_sched_clock, 32, 1000000); + sched_clock_register(tegra_read_sched_clock, 32, 1000000); if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US, "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) { @@ -241,8 +239,6 @@ static void __init tegra20_init_rtc(struct device_node *np) else clk_prepare_enable(clk); - of_node_put(np); - register_persistent_clock(NULL, tegra_read_persistent_clock); } CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc); diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c index 0198504..d8e47e5 100644 --- a/drivers/clocksource/time-armada-370-xp.c +++ b/drivers/clocksource/time-armada-370-xp.c @@ -96,7 +96,7 @@ static void local_timer_ctrl_clrset(u32 clr, u32 set) local_base + TIMER_CTRL_OFF); } -static u32 notrace armada_370_xp_read_sched_clock(void) +static u64 notrace armada_370_xp_read_sched_clock(void) { return ~readl(timer_base + TIMER0_VAL_OFF); } @@ -258,7 +258,7 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np) /* * Set scale and timer for sched_clock. */ - setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk); + sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk); /* * Setup free-running clocksource timer (interrupts diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c index ef3cfb2..8a492d3 100644 --- a/drivers/clocksource/timer-prima2.c +++ b/drivers/clocksource/timer-prima2.c @@ -165,9 +165,9 @@ static struct irqaction sirfsoc_timer_irq = { }; /* Overwrite weak default sched_clock with more precise one */ -static u32 notrace sirfsoc_read_sched_clock(void) +static u64 notrace sirfsoc_read_sched_clock(void) { - return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff); + return sirfsoc_timer_read(NULL); } static void __init sirfsoc_clockevent_init(void) @@ -206,7 +206,7 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); - setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE); + sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE); BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c index 587e020..02821b0 100644 --- a/drivers/clocksource/vf_pit_timer.c +++ b/drivers/clocksource/vf_pit_timer.c @@ -52,7 +52,7 @@ static inline void pit_irq_acknowledge(void) __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG); } -static unsigned int pit_read_sched_clock(void) +static u64 pit_read_sched_clock(void) { return __raw_readl(clksrc_base + PITCVAL); } @@ -64,7 +64,7 @@ static int __init pit_clocksource_init(unsigned long rate) __raw_writel(~0UL, clksrc_base + PITLDVAL); __raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL); - setup_sched_clock(pit_read_sched_clock, 32, rate); + sched_clock_register(pit_read_sched_clock, 32, rate); return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate, 300, 32, clocksource_mmio_readl_down); } diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c index 64f553f..ad3c0e8 100644 --- a/drivers/clocksource/vt8500_timer.c +++ b/drivers/clocksource/vt8500_timer.c @@ -137,14 +137,12 @@ static void __init vt8500_timer_init(struct device_node *np) if (!regbase) { pr_err("%s: Missing iobase description in Device Tree\n", __func__); - of_node_put(np); return; } timer_irq = irq_of_parse_and_map(np, 0); if (!timer_irq) { pr_err("%s: Missing irq description in Device Tree\n", __func__); - of_node_put(np); return; } |