diff options
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 20 | ||||
-rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-amd756.c | 5 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-cpm.c | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-highlander.c | 498 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mpc.c | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 12 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-parport-light.c | 39 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-pca-isa.c | 22 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-powermac.c | 29 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-viapro.c | 22 | ||||
-rw-r--r-- | drivers/i2c/chips/Kconfig | 11 | ||||
-rw-r--r-- | drivers/i2c/chips/Makefile | 1 | ||||
-rw-r--r-- | drivers/i2c/chips/at24.c | 1 | ||||
-rw-r--r-- | drivers/i2c/chips/ds1682.c | 1 | ||||
-rw-r--r-- | drivers/i2c/chips/isp1301_omap.c | 141 | ||||
-rw-r--r-- | drivers/i2c/chips/mcu_mpc8349emitx.c | 209 | ||||
-rw-r--r-- | drivers/i2c/chips/menelaus.c | 34 | ||||
-rw-r--r-- | drivers/i2c/chips/tps65010.c | 12 | ||||
-rw-r--r-- | drivers/i2c/i2c-core.c | 35 | ||||
-rw-r--r-- | drivers/i2c/i2c-dev.c | 6 |
21 files changed, 936 insertions, 165 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 6ee997b..acadbc5 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -55,7 +55,7 @@ config I2C_AMD756 config I2C_AMD756_S4882 tristate "SMBus multiplexing on the Tyan S4882" - depends on I2C_AMD756 && EXPERIMENTAL + depends on I2C_AMD756 && X86 && EXPERIMENTAL help Enabling this option will add specific SMBus support for the Tyan S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed @@ -148,7 +148,7 @@ config I2C_NFORCE2 config I2C_NFORCE2_S4985 tristate "SMBus multiplexing on the Tyan S4985" - depends on I2C_NFORCE2 && EXPERIMENTAL + depends on I2C_NFORCE2 && X86 && EXPERIMENTAL help Enabling this option will add specific SMBus support for the Tyan S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed @@ -209,7 +209,7 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA VT82C596/82C686/82xx and CX700" + tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820" depends on PCI help If you say yes to this option, support will be included for the VIA @@ -223,6 +223,8 @@ config I2C_VIAPRO VT8237R/A/S VT8251 CX700 + VX800 + VX820 This driver can also be built as a module. If so, the module will be called i2c-viapro. @@ -330,6 +332,18 @@ config I2C_GPIO This is a very simple bitbanging I2C driver utilizing the arch-neutral GPIO API to control the SCL and SDA lines. +config I2C_HIGHLANDER + tristate "Highlander FPGA SMBus interface" + depends on SH_HIGHLANDER + help + If you say yes to this option, support will be included for + the SMBus interface located in the FPGA on various Highlander + boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL + FPGAs. This is wholly unrelated to the SoC I2C. + + This driver can also be built as a module. If so, the module + will be called i2c-highlander. + config I2C_IBM_IIC tristate "IBM PPC 4xx on-chip I2C interface" depends on 4xx diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 97dbfa2..0c2c4b2 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o +obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 1ea3925..424dad6 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -332,10 +332,6 @@ static int __devinit amd756_probe(struct pci_dev *pdev, int error; u8 temp; - /* driver_data might come from user-space, so check it */ - if (id->driver_data >= ARRAY_SIZE(chipname)) - return -EINVAL; - if (amd756_ioport) { dev_err(&pdev->dev, "Only one device supported " "(you have a strange motherboard, btw)\n"); @@ -412,7 +408,6 @@ static struct pci_driver amd756_driver = { .id_table = amd756_ids, .probe = amd756_probe, .remove = __devexit_p(amd756_remove), - .dynids.use_driver_data = 1, }; static int __init amd756_init(void) diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 8164de1..228f757 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -423,7 +423,6 @@ static const struct i2c_adapter cpm_ops = { .owner = THIS_MODULE, .name = "i2c-cpm", .algo = &cpm_i2c_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, }; static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c new file mode 100644 index 0000000..f4d22ae --- /dev/null +++ b/drivers/i2c/busses/i2c-highlander.c @@ -0,0 +1,498 @@ +/* + * Renesas Solutions Highlander FPGA I2C/SMBus support. + * + * Supported devices: R0P7780LC0011RL, R0P7785LC0011RL + * + * Copyright (C) 2008 Paul Mundt + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Atom Create Engineering Co., Ltd. + * + * This file is subject to the terms and conditions of the GNU General + * Public License version 2. See the file "COPYING" in the main directory + * of this archive for more details. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/completion.h> +#include <linux/io.h> +#include <linux/delay.h> + +#define SMCR 0x00 +#define SMCR_START (1 << 0) +#define SMCR_IRIC (1 << 1) +#define SMCR_BBSY (1 << 2) +#define SMCR_ACKE (1 << 3) +#define SMCR_RST (1 << 4) +#define SMCR_IEIC (1 << 6) + +#define SMSMADR 0x02 + +#define SMMR 0x04 +#define SMMR_MODE0 (1 << 0) +#define SMMR_MODE1 (1 << 1) +#define SMMR_CAP (1 << 3) +#define SMMR_TMMD (1 << 4) +#define SMMR_SP (1 << 7) + +#define SMSADR 0x06 +#define SMTRDR 0x46 + +struct highlander_i2c_dev { + struct device *dev; + void __iomem *base; + struct i2c_adapter adapter; + struct completion cmd_complete; + unsigned long last_read_time; + int irq; + u8 *buf; + size_t buf_len; +}; + +static int iic_force_poll, iic_force_normal; +static int iic_timeout = 1000, iic_read_delay; + +static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) | SMCR_IEIC, dev->base + SMCR); +} + +static inline void highlander_i2c_irq_disable(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) & ~SMCR_IEIC, dev->base + SMCR); +} + +static inline void highlander_i2c_start(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) | SMCR_START, dev->base + SMCR); +} + +static inline void highlander_i2c_done(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) | SMCR_IRIC, dev->base + SMCR); +} + +static void highlander_i2c_setup(struct highlander_i2c_dev *dev) +{ + u16 smmr; + + smmr = ioread16(dev->base + SMMR); + smmr |= SMMR_TMMD; + + if (iic_force_normal) + smmr &= ~SMMR_SP; + else + smmr |= SMMR_SP; + + iowrite16(smmr, dev->base + SMMR); +} + +static void smbus_write_data(u8 *src, u16 *dst, int len) +{ + for (; len > 1; len -= 2) { + *dst++ = be16_to_cpup((u16 *)src); + src += 2; + } + + if (len) + *dst = *src << 8; +} + +static void smbus_read_data(u16 *src, u8 *dst, int len) +{ + for (; len > 1; len -= 2) { + *(u16 *)dst = cpu_to_be16p(src++); + dst += 2; + } + + if (len) + *dst = *src >> 8; +} + +static void highlander_i2c_command(struct highlander_i2c_dev *dev, + u8 command, int len) +{ + unsigned int i; + u16 cmd = (command << 8) | command; + + for (i = 0; i < len; i += 2) { + if (len - i == 1) + cmd = command << 8; + iowrite16(cmd, dev->base + SMSADR + i); + dev_dbg(dev->dev, "command data[%x] 0x%04x\n", i/2, cmd); + } +} + +static int highlander_i2c_wait_for_bbsy(struct highlander_i2c_dev *dev) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(iic_timeout); + while (ioread16(dev->base + SMCR) & SMCR_BBSY) { + if (time_after(jiffies, timeout)) { + dev_warn(dev->dev, "timeout waiting for bus ready\n"); + return -ETIMEDOUT; + } + + msleep(1); + } + + return 0; +} + +static int highlander_i2c_reset(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) | SMCR_RST, dev->base + SMCR); + return highlander_i2c_wait_for_bbsy(dev); +} + +static int highlander_i2c_wait_for_ack(struct highlander_i2c_dev *dev) +{ + u16 tmp = ioread16(dev->base + SMCR); + + if ((tmp & (SMCR_IRIC | SMCR_ACKE)) == SMCR_ACKE) { + dev_warn(dev->dev, "ack abnormality\n"); + return highlander_i2c_reset(dev); + } + + return 0; +} + +static irqreturn_t highlander_i2c_irq(int irq, void *dev_id) +{ + struct highlander_i2c_dev *dev = dev_id; + + highlander_i2c_done(dev); + complete(&dev->cmd_complete); + + return IRQ_HANDLED; +} + +static void highlander_i2c_poll(struct highlander_i2c_dev *dev) +{ + unsigned long timeout; + u16 smcr; + + timeout = jiffies + msecs_to_jiffies(iic_timeout); + for (;;) { + smcr = ioread16(dev->base + SMCR); + + /* + * Don't bother checking ACKE here, this and the reset + * are handled in highlander_i2c_wait_xfer_done() when + * waiting for the ACK. + */ + + if (smcr & SMCR_IRIC) + return; + if (time_after(jiffies, timeout)) + break; + + cpu_relax(); + cond_resched(); + } + + dev_err(dev->dev, "polling timed out\n"); +} + +static inline int highlander_i2c_wait_xfer_done(struct highlander_i2c_dev *dev) +{ + if (dev->irq) + wait_for_completion_timeout(&dev->cmd_complete, + msecs_to_jiffies(iic_timeout)); + else + /* busy looping, the IRQ of champions */ + highlander_i2c_poll(dev); + + return highlander_i2c_wait_for_ack(dev); +} + +static int highlander_i2c_read(struct highlander_i2c_dev *dev) +{ + int i, cnt; + u16 data[16]; + + if (highlander_i2c_wait_for_bbsy(dev)) + return -EAGAIN; + + highlander_i2c_start(dev); + + if (highlander_i2c_wait_xfer_done(dev)) { + dev_err(dev->dev, "Arbitration loss\n"); + return -EAGAIN; + } + + /* + * The R0P7780LC0011RL FPGA needs a significant delay between + * data read cycles, otherwise the transciever gets confused and + * garbage is returned when the read is subsequently aborted. + * + * It is not sufficient to wait for BBSY. + * + * While this generally only applies to the older SH7780-based + * Highlanders, the same issue can be observed on SH7785 ones, + * albeit less frequently. SH7780-based Highlanders may need + * this to be as high as 1000 ms. + */ + if (iic_read_delay && time_before(jiffies, dev->last_read_time + + msecs_to_jiffies(iic_read_delay))) + msleep(jiffies_to_msecs((dev->last_read_time + + msecs_to_jiffies(iic_read_delay)) - jiffies)); + + cnt = (dev->buf_len + 1) >> 1; + for (i = 0; i < cnt; i++) { + data[i] = ioread16(dev->base + SMTRDR + (i * sizeof(u16))); + dev_dbg(dev->dev, "read data[%x] 0x%04x\n", i, data[i]); + } + + smbus_read_data(data, dev->buf, dev->buf_len); + + dev->last_read_time = jiffies; + + return 0; +} + +static int highlander_i2c_write(struct highlander_i2c_dev *dev) +{ + int i, cnt; + u16 data[16]; + + smbus_write_data(dev->buf, data, dev->buf_len); + + cnt = (dev->buf_len + 1) >> 1; + for (i = 0; i < cnt; i++) { + iowrite16(data[i], dev->base + SMTRDR + (i * sizeof(u16))); + dev_dbg(dev->dev, "write data[%x] 0x%04x\n", i, data[i]); + } + + if (highlander_i2c_wait_for_bbsy(dev)) + return -EAGAIN; + + highlander_i2c_start(dev); + + return highlander_i2c_wait_xfer_done(dev); +} + +static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + struct highlander_i2c_dev *dev = i2c_get_adapdata(adap); + int read = read_write & I2C_SMBUS_READ; + u16 tmp; + + init_completion(&dev->cmd_complete); + + dev_dbg(dev->dev, "addr %04x, command %02x, read_write %d, size %d\n", + addr, command, read_write, size); + + /* + * Set up the buffer and transfer size + */ + switch (size) { + case I2C_SMBUS_BYTE_DATA: + dev->buf = &data->byte; + dev->buf_len = 1; + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + dev->buf = &data->block[1]; + dev->buf_len = data->block[0]; + break; + default: + dev_err(dev->dev, "unsupported command %d\n", size); + return -EINVAL; + } + + /* + * Encode the mode setting + */ + tmp = ioread16(dev->base + SMMR); + tmp &= ~(SMMR_MODE0 | SMMR_MODE1); + + switch (dev->buf_len) { + case 1: + /* default */ + break; + case 8: + tmp |= SMMR_MODE0; + break; + case 16: + tmp |= SMMR_MODE1; + break; + case 32: + tmp |= (SMMR_MODE0 | SMMR_MODE1); + break; + default: + dev_err(dev->dev, "unsupported xfer size %d\n", dev->buf_len); + return -EINVAL; + } + + iowrite16(tmp, dev->base + SMMR); + + /* Ensure we're in a sane state */ + highlander_i2c_done(dev); + + /* Set slave address */ + iowrite16((addr << 1) | read, dev->base + SMSMADR); + + highlander_i2c_command(dev, command, dev->buf_len); + + if (read) + return highlander_i2c_read(dev); + else + return highlander_i2c_write(dev); +} + +static u32 highlander_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK; +} + +static const struct i2c_algorithm highlander_i2c_algo = { + .smbus_xfer = highlander_i2c_smbus_xfer, + .functionality = highlander_i2c_func, +}; + +static int __devinit highlander_i2c_probe(struct platform_device *pdev) +{ + struct highlander_i2c_dev *dev; + struct i2c_adapter *adap; + struct resource *res; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "no mem resource\n"); + return -ENODEV; + } + + dev = kzalloc(sizeof(struct highlander_i2c_dev), GFP_KERNEL); + if (unlikely(!dev)) + return -ENOMEM; + + dev->base = ioremap_nocache(res->start, res->end - res->start + 1); + if (unlikely(!dev->base)) { + ret = -ENXIO; + goto err; + } + + dev->dev = &pdev->dev; + platform_set_drvdata(pdev, dev); + + dev->irq = platform_get_irq(pdev, 0); + if (iic_force_poll) + dev->irq = 0; + + if (dev->irq) { + ret = request_irq(dev->irq, highlander_i2c_irq, IRQF_DISABLED, + pdev->name, dev); + if (unlikely(ret)) + goto err_unmap; + + highlander_i2c_irq_enable(dev); + } else { + dev_notice(&pdev->dev, "no IRQ, using polling mode\n"); + highlander_i2c_irq_disable(dev); + } + + dev->last_read_time = jiffies; /* initial read jiffies */ + + highlander_i2c_setup(dev); + + adap = &dev->adapter; + i2c_set_adapdata(adap, dev); + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON; + strlcpy(adap->name, "HL FPGA I2C adapter", sizeof(adap->name)); + adap->algo = &highlander_i2c_algo; + adap->dev.parent = &pdev->dev; + adap->nr = pdev->id; + + /* + * Reset the adapter + */ + ret = highlander_i2c_reset(dev); + if (unlikely(ret)) { + dev_err(&pdev->dev, "controller didn't come up\n"); + goto err_free_irq; + } + + ret = i2c_add_numbered_adapter(adap); + if (unlikely(ret)) { + dev_err(&pdev->dev, "failure adding adapter\n"); + goto err_free_irq; + } + + return 0; + +err_free_irq: + if (dev->irq) + free_irq(dev->irq, dev); +err_unmap: + iounmap(dev->base); +err: + kfree(dev); + + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int __devexit highlander_i2c_remove(struct platform_device *pdev) +{ + struct highlander_i2c_dev *dev = platform_get_drvdata(pdev); + + i2c_del_adapter(&dev->adapter); + + if (dev->irq) + free_irq(dev->irq, dev); + + iounmap(dev->base); + kfree(dev); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver highlander_i2c_driver = { + .driver = { + .name = "i2c-highlander", + .owner = THIS_MODULE, + }, + + .probe = highlander_i2c_probe, + .remove = __devexit_p(highlander_i2c_remove), +}; + +static int __init highlander_i2c_init(void) +{ + return platform_driver_register(&highlander_i2c_driver); +} + +static void __exit highlander_i2c_exit(void) +{ + platform_driver_unregister(&highlander_i2c_driver); +} + +module_init(highlander_i2c_init); +module_exit(highlander_i2c_exit); + +MODULE_AUTHOR("Paul Mundt"); +MODULE_DESCRIPTION("Renesas Highlander FPGA I2C/SMBus adapter"); +MODULE_LICENSE("GPL v2"); + +module_param(iic_force_poll, bool, 0); +module_param(iic_force_normal, bool, 0); +module_param(iic_timeout, int, 0); +module_param(iic_read_delay, int, 0); + +MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); +MODULE_PARM_DESC(iic_force_normal, + "Force normal mode (100 kHz), default is fast mode (400 kHz)"); +MODULE_PARM_DESC(iic_timeout, "Set timeout value in msecs (default 1000 ms)"); +MODULE_PARM_DESC(iic_read_delay, + "Delay between data read cycles (default 0 ms)"); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 27443f0..a9a45fc 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = { .name = "MPC adapter", .id = I2C_HW_MPC107, .algo = &mpc_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .timeout = 1, }; diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index e7eb7bf..608038d 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -589,11 +589,16 @@ omap_i2c_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->irq = irq->start; - dev->base = (void __iomem *) IO_ADDRESS(mem->start); + dev->base = ioremap(mem->start, mem->end - mem->start + 1); + if (!dev->base) { + r = -ENOMEM; + goto err_free_mem; + } + platform_set_drvdata(pdev, dev); if ((r = omap_i2c_get_clocks(dev)) != 0) - goto err_free_mem; + goto err_iounmap; omap_i2c_unidle(dev); @@ -640,6 +645,8 @@ err_unuse_clocks: omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); omap_i2c_idle(dev); omap_i2c_put_clocks(dev); +err_iounmap: + iounmap(dev->base); err_free_mem: platform_set_drvdata(pdev, NULL); kfree(dev); @@ -661,6 +668,7 @@ omap_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); omap_i2c_put_clocks(dev); + iounmap(dev->base); kfree(dev); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(mem->start, (mem->end - mem->start) + 1); diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index c6faf9b..b2b8380 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -123,11 +123,6 @@ static struct i2c_adapter parport_adapter = { static int __devinit i2c_parport_probe(struct platform_device *pdev) { int err; - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) - return -EBUSY; /* Reset hardware to a sane state (SCL and SDA high) */ parport_setsda(NULL, 1); @@ -138,29 +133,19 @@ static int __devinit i2c_parport_probe(struct platform_device *pdev) parport_adapter.dev.parent = &pdev->dev; err = i2c_bit_add_bus(&parport_adapter); - if (err) { + if (err) dev_err(&pdev->dev, "Unable to register with I2C\n"); - goto exit_region; - } - return 0; - -exit_region: - release_region(res->start, res->end - res->start + 1); return err; } static int __devexit i2c_parport_remove(struct platform_device *pdev) { - struct resource *res; - i2c_del_adapter(&parport_adapter); /* Un-init if needed (power off...) */ if (adapter_parm[type].init.val) line_set(0, &adapter_parm[type].init); - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start, res->end - res->start + 1); return 0; } @@ -175,12 +160,6 @@ static struct platform_driver i2c_parport_driver = { static int __init i2c_parport_device_add(u16 address) { - struct resource res = { - .start = address, - .end = address + 2, - .name = DRVNAME, - .flags = IORESOURCE_IO, - }; int err; pdev = platform_device_alloc(DRVNAME, -1); @@ -190,13 +169,6 @@ static int __init i2c_parport_device_add(u16 address) goto exit; } - err = platform_device_add_resources(pdev, &res, 1); - if (err) { - printk(KERN_ERR DRVNAME ": Device resource addition failed " - "(%d)\n", err); - goto exit_device_put; - } - err = platform_device_add(pdev); if (err) { printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", @@ -231,13 +203,16 @@ static int __init i2c_parport_init(void) base = DEFAULT_BASE; } + if (!request_region(base, 3, DRVNAME)) + return -EBUSY; + if (!adapter_parm[type].getscl.val) parport_algo_data.getscl = NULL; /* Sets global pdev as a side effect */ err = i2c_parport_device_add(base); if (err) - goto exit; + goto exit_release; err = platform_driver_register(&i2c_parport_driver); if (err) @@ -247,7 +222,8 @@ static int __init i2c_parport_init(void) exit_device: platform_device_unregister(pdev); -exit: +exit_release: + release_region(base, 3); return err; } @@ -255,6 +231,7 @@ static void __exit i2c_parport_exit(void) { platform_driver_unregister(&i2c_parport_driver); platform_device_unregister(pdev); + release_region(base, 3); } MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index a119784..9eb7626 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -36,8 +36,8 @@ #define DRIVER "i2c-pca-isa" #define IO_SIZE 4 -static unsigned long base = 0x330; -static int irq = 10; +static unsigned long base; +static int irq = -1; /* Data sheet recommends 59kHz for 100kHz operation due to variation * in the actual clock rate */ @@ -107,13 +107,26 @@ static struct i2c_adapter pca_isa_ops = { .timeout = 100, }; +static int __devinit pca_isa_match(struct device *dev, unsigned int id) +{ + int match = base != 0; + + if (match) { + if (irq <= -1) + dev_warn(dev, "Using polling mode (specify irq)\n"); + } else + dev_err(dev, "Please specify I/O base\n"); + + return match; +} + static int __devinit pca_isa_probe(struct device *dev, unsigned int id) { init_waitqueue_head(&pca_wait); dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq); -#ifdef CONFIG_PPC_MERGE +#ifdef CONFIG_PPC if (check_legacy_ioport(base)) { dev_err(dev, "I/O address %#08lx is not available\n", base); goto out; @@ -153,7 +166,7 @@ static int __devexit pca_isa_remove(struct device *dev, unsigned int id) { i2c_del_adapter(&pca_isa_ops); - if (irq > 0) { + if (irq > -1) { disable_irq(irq); free_irq(irq, &pca_isa_ops); } @@ -163,6 +176,7 @@ static int __devexit pca_isa_remove(struct device *dev, unsigned int id) } static struct isa_driver pca_isa_driver = { + .match = pca_isa_match, .probe = pca_isa_probe, .remove = __devexit_p(pca_isa_remove), .driver = { diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 0e7b1c6..60ca917 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -259,6 +259,35 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev) } printk(KERN_INFO "PowerMac i2c bus %s registered\n", name); + + if (!strncmp(basename, "uni-n", 5)) { + struct device_node *np; + const u32 *prop; + struct i2c_board_info info; + + /* Instantiate I2C motion sensor if present */ + np = of_find_node_by_name(NULL, "accelerometer"); + if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") && + (prop = of_get_property(np, "reg", NULL))) { + int i2c_bus; + const char *tmp_bus; + + /* look for bus either using "reg" or by path */ + tmp_bus = strstr(np->full_name, "/i2c-bus@"); + if (tmp_bus) + i2c_bus = *(tmp_bus + 9) - '0'; + else + i2c_bus = ((*prop) >> 8) & 0x0f; + + if (pmac_i2c_get_channel(bus) == i2c_bus) { + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = ((*prop) & 0xff) >> 1; + strlcpy(info.type, "ams", I2C_NAME_SIZE); + i2c_new_device(adapter, &info); + } + } + } + return rc; } diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 862eb35..9f194d9 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -36,6 +36,7 @@ VT8237S 0x3372 yes VT8251 0x3287 yes CX700 0x8324 yes + VX800/VX820 0x8353 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -82,6 +83,7 @@ static unsigned short SMBHSTCFG = 0xD2; #define VT596_BYTE 0x04 #define VT596_BYTE_DATA 0x08 #define VT596_WORD_DATA 0x0C +#define VT596_PROC_CALL 0x10 #define VT596_BLOCK_DATA 0x14 #define VT596_I2C_BLOCK_DATA 0x34 @@ -232,6 +234,12 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, } size = VT596_WORD_DATA; break; + case I2C_SMBUS_PROC_CALL: + outb_p(command, SMBHSTCMD); + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + size = VT596_PROC_CALL; + break; case I2C_SMBUS_I2C_BLOCK_DATA: if (!(vt596_features & FEATURE_I2CBLOCK)) goto exit_unsupported; @@ -262,6 +270,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, if (status) return status; + if (size == VT596_PROC_CALL) + read_write = I2C_SMBUS_READ; + if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) return 0; @@ -271,6 +282,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, data->byte = inb_p(SMBHSTDAT0); break; case VT596_WORD_DATA: + case VT596_PROC_CALL: data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); break; case VT596_I2C_BLOCK_DATA: @@ -295,7 +307,7 @@ static u32 vt596_func(struct i2c_adapter *adapter) { u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA; + I2C_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA; if (vt596_features & FEATURE_I2CBLOCK) func |= I2C_FUNC_SMBUS_I2C_BLOCK; @@ -320,10 +332,6 @@ static int __devinit vt596_probe(struct pci_dev *pdev, unsigned char temp; int error = -ENODEV; - /* driver_data might come from user-space, so check it */ - if (id->driver_data & 1 || id->driver_data > 0xff) - return -EINVAL; - /* Determine the address of the SMBus areas */ if (force_addr) { vt596_smba = force_addr & 0xfff0; @@ -396,6 +404,7 @@ found: switch (pdev->device) { case PCI_DEVICE_ID_VIA_CX700: + case PCI_DEVICE_ID_VIA_VX800: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: @@ -459,6 +468,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA3 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800), + .driver_data = SMBBA3 }, { 0, } }; @@ -468,7 +479,6 @@ static struct pci_driver vt596_driver = { .name = "vt596_smbus", .id_table = vt596_ids, .probe = vt596_probe, - .dynids.use_driver_data = 1, }; static int __init i2c_vt596_init(void) diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index a95cb94..1735682 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -172,4 +172,15 @@ config MENELAUS and other features that are often used in portable devices like cell phones and PDAs. +config MCU_MPC8349EMITX + tristate "MPC8349E-mITX MCU driver" + depends on I2C && PPC_83xx + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here to enable soft power-off functionality on the Freescale + boards with the MPC8349E-mITX-compatible MCU chips. This driver will + also register MCU GPIOs with the generic GPIO API, so you'll able + to use MCU pins as GPIOs. + endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 39e3e69..ca520fa 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o +obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c index 2a4acb2..d477552 100644 --- a/drivers/i2c/chips/at24.c +++ b/drivers/i2c/chips/at24.c @@ -460,7 +460,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) */ at24->bin.attr.name = "eeprom"; at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; - at24->bin.attr.owner = THIS_MODULE; at24->bin.read = at24_bin_read; at24->bin.size = chip.byte_len; diff --git a/drivers/i2c/chips/ds1682.c b/drivers/i2c/chips/ds1682.c index 23be4d4..f3ee4a1 100644 --- a/drivers/i2c/chips/ds1682.c +++ b/drivers/i2c/chips/ds1682.c @@ -190,7 +190,6 @@ static struct bin_attribute ds1682_eeprom_attr = { .attr = { .name = "eeprom", .mode = S_IRUGO | S_IWUSR, - .owner = THIS_MODULE, }, .size = DS1682_EEPROM_SIZE, .read = ds1682_eeprom_read, diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 4655b79..28902eb 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -49,10 +49,9 @@ MODULE_LICENSE("GPL"); struct isp1301 { struct otg_transceiver otg; - struct i2c_client client; + struct i2c_client *client; void (*i2c_release)(struct device *dev); - int irq; int irq_type; u32 last_otg_ctrl; @@ -138,14 +137,6 @@ static inline void notresponding(struct isp1301 *isp) /*-------------------------------------------------------------------------*/ -/* only two addresses possible */ -#define ISP_BASE 0x2c -static unsigned short normal_i2c[] = { - ISP_BASE, ISP_BASE + 1, - I2C_CLIENT_END }; - -I2C_CLIENT_INSMOD; - static struct i2c_driver isp1301_driver; /* smbus apis are used for portability */ @@ -153,25 +144,25 @@ static struct i2c_driver isp1301_driver; static inline u8 isp1301_get_u8(struct isp1301 *isp, u8 reg) { - return i2c_smbus_read_byte_data(&isp->client, reg + 0); + return i2c_smbus_read_byte_data(isp->client, reg + 0); } static inline int isp1301_get_u16(struct isp1301 *isp, u8 reg) { - return i2c_smbus_read_word_data(&isp->client, reg); + return i2c_smbus_read_word_data(isp->client, reg); } static inline int isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits) { - return i2c_smbus_write_byte_data(&isp->client, reg + 0, bits); + return i2c_smbus_write_byte_data(isp->client, reg + 0, bits); } static inline int isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits) { - return i2c_smbus_write_byte_data(&isp->client, reg + 1, bits); + return i2c_smbus_write_byte_data(isp->client, reg + 1, bits); } /*-------------------------------------------------------------------------*/ @@ -349,10 +340,10 @@ isp1301_defer_work(struct isp1301 *isp, int work) int status; if (isp && !test_and_set_bit(work, &isp->todo)) { - (void) get_device(&isp->client.dev); + (void) get_device(&isp->client->dev); status = schedule_work(&isp->work); if (!status && !isp->working) - dev_vdbg(&isp->client.dev, + dev_vdbg(&isp->client->dev, "work item %d may be lost\n", work); } } @@ -1135,7 +1126,7 @@ isp1301_work(struct work_struct *work) /* transfer state from otg engine to isp1301 */ if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) { otg_update_isp(isp); - put_device(&isp->client.dev); + put_device(&isp->client->dev); } #endif /* transfer state from isp1301 to otg engine */ @@ -1143,7 +1134,7 @@ isp1301_work(struct work_struct *work) u8 stat = isp1301_clear_latch(isp); isp_update_otg(isp, stat); - put_device(&isp->client.dev); + put_device(&isp->client->dev); } if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) { @@ -1178,7 +1169,7 @@ isp1301_work(struct work_struct *work) } host_resume(isp); // mdelay(10); - put_device(&isp->client.dev); + put_device(&isp->client->dev); } if (test_and_clear_bit(WORK_TIMER, &isp->todo)) { @@ -1187,15 +1178,15 @@ isp1301_work(struct work_struct *work) if (!stop) mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); #endif - put_device(&isp->client.dev); + put_device(&isp->client->dev); } if (isp->todo) - dev_vdbg(&isp->client.dev, + dev_vdbg(&isp->client->dev, "work done, todo = 0x%lx\n", isp->todo); if (stop) { - dev_dbg(&isp->client.dev, "stop\n"); + dev_dbg(&isp->client->dev, "stop\n"); break; } } while (isp->todo); @@ -1219,7 +1210,7 @@ static void isp1301_release(struct device *dev) { struct isp1301 *isp; - isp = container_of(dev, struct isp1301, client.dev); + isp = dev_get_drvdata(dev); /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ if (isp->i2c_release) @@ -1229,15 +1220,15 @@ static void isp1301_release(struct device *dev) static struct isp1301 *the_transceiver; -static int isp1301_detach_client(struct i2c_client *i2c) +static int __exit isp1301_remove(struct i2c_client *i2c) { struct isp1301 *isp; - isp = container_of(i2c, struct isp1301, client); + isp = i2c_get_clientdata(i2c); isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); - free_irq(isp->irq, isp); + free_irq(i2c->irq, isp); #ifdef CONFIG_USB_OTG otg_unbind(isp); #endif @@ -1252,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c) put_device(&i2c->dev); the_transceiver = 0; - return i2c_detach_client(i2c); + return 0; } /*-------------------------------------------------------------------------*/ @@ -1285,7 +1276,7 @@ static int isp1301_otg_enable(struct isp1301 *isp) isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); - dev_info(&isp->client.dev, "ready for dual-role USB ...\n"); + dev_info(&isp->client->dev, "ready for dual-role USB ...\n"); return 0; } @@ -1310,7 +1301,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) #ifdef CONFIG_USB_OTG isp->otg.host = host; - dev_dbg(&isp->client.dev, "registered host\n"); + dev_dbg(&isp->client->dev, "registered host\n"); host_suspend(isp); if (isp->otg.gadget) return isp1301_otg_enable(isp); @@ -1325,7 +1316,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) if (machine_is_omap_h2()) isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); - dev_info(&isp->client.dev, "A-Host sessions ok\n"); + dev_info(&isp->client->dev, "A-Host sessions ok\n"); isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, INTR_ID_GND); isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, @@ -1343,7 +1334,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) return 0; #else - dev_dbg(&isp->client.dev, "host sessions not allowed\n"); + dev_dbg(&isp->client->dev, "host sessions not allowed\n"); return -EINVAL; #endif @@ -1370,7 +1361,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) #ifdef CONFIG_USB_OTG isp->otg.gadget = gadget; - dev_dbg(&isp->client.dev, "registered gadget\n"); + dev_dbg(&isp->client->dev, "registered gadget\n"); /* gadget driver may be suspended until vbus_connect () */ if (isp->otg.host) return isp1301_otg_enable(isp); @@ -1395,7 +1386,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) INTR_SESS_VLD); isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, INTR_VBUS_VLD); - dev_info(&isp->client.dev, "B-Peripheral sessions ok\n"); + dev_info(&isp->client->dev, "B-Peripheral sessions ok\n"); dump_regs(isp, __func__); /* If this has a Mini-AB connector, this mode is highly @@ -1408,7 +1399,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) return 0; #else - dev_dbg(&isp->client.dev, "peripheral sessions not allowed\n"); + dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n"); return -EINVAL; #endif } @@ -1508,12 +1499,10 @@ isp1301_start_hnp(struct otg_transceiver *dev) /*-------------------------------------------------------------------------*/ -/* no error returns, they'd just make bus scanning stop */ -static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) +static int __init isp1301_probe(struct i2c_client *i2c) { int status; struct isp1301 *isp; - struct i2c_client *i2c; if (the_transceiver) return 0; @@ -1527,37 +1516,19 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) isp->timer.function = isp1301_timer; isp->timer.data = (unsigned long) isp; - isp->irq = -1; - isp->client.addr = address; - i2c_set_clientdata(&isp->client, isp); - isp->client.adapter = bus; - isp->client.driver = &isp1301_driver; - strlcpy(isp->client.name, DRIVER_NAME, I2C_NAME_SIZE); - i2c = &isp->client; - - /* if this is a true probe, verify the chip ... */ - if (kind < 0) { - status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); - if (status != I2C_VENDOR_ID_PHILIPS) { - dev_dbg(&bus->dev, "addr %d not philips id: %d\n", - address, status); - goto fail1; - } - status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); - if (status != I2C_PRODUCT_ID_PHILIPS_1301) { - dev_dbg(&bus->dev, "%d not isp1301, %d\n", - address, status); - goto fail1; - } - } + i2c_set_clientdata(i2c, isp); + isp->client = i2c; - status = i2c_attach_client(i2c); - if (status < 0) { - dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n", - DRIVER_NAME, address, status); -fail1: - kfree(isp); - return 0; + /* verify the chip (shouldn't be necesary) */ + status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); + if (status != I2C_VENDOR_ID_PHILIPS) { + dev_dbg(&i2c->dev, "not philips id: %d\n", status); + goto fail; + } + status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); + if (status != I2C_PRODUCT_ID_PHILIPS_1301) { + dev_dbg(&i2c->dev, "not isp1301, %d\n", status); + goto fail; } isp->i2c_release = i2c->dev.release; i2c->dev.release = isp1301_release; @@ -1586,7 +1557,7 @@ fail1: status = otg_bind(isp); if (status < 0) { dev_dbg(&i2c->dev, "can't bind OTG\n"); - goto fail2; + goto fail; } #endif @@ -1599,26 +1570,21 @@ fail1: /* IRQ wired at M14 */ omap_cfg_reg(M14_1510_GPIO2); - isp->irq = OMAP_GPIO_IRQ(2); if (gpio_request(2, "isp1301") == 0) gpio_direction_input(2); isp->irq_type = IRQF_TRIGGER_FALLING; } isp->irq_type |= IRQF_SAMPLE_RANDOM; - status = request_irq(isp->irq, isp1301_irq, + status = request_irq(i2c->irq, isp1301_irq, isp->irq_type, DRIVER_NAME, isp); if (status < 0) { dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", - isp->irq, status); -#ifdef CONFIG_USB_OTG -fail2: -#endif - i2c_detach_client(i2c); - goto fail1; + i2c->irq, status); + goto fail; } - isp->otg.dev = &isp->client.dev; + isp->otg.dev = &i2c->dev; isp->otg.label = DRIVER_NAME; isp->otg.set_host = isp1301_set_host, @@ -1649,22 +1615,25 @@ fail2: status); return 0; -} -static int isp1301_scan_bus(struct i2c_adapter *bus) -{ - if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA - | I2C_FUNC_SMBUS_READ_WORD_DATA)) - return -EINVAL; - return i2c_probe(bus, &addr_data, isp1301_probe); +fail: + kfree(isp); + return -ENODEV; } +static const struct i2c_device_id isp1301_id[] = { + { "isp1301_omap", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, isp1301_id); + static struct i2c_driver isp1301_driver = { .driver = { .name = "isp1301_omap", }, - .attach_adapter = isp1301_scan_bus, - .detach_client = isp1301_detach_client, + .probe = isp1301_probe, + .remove = __exit_p(isp1301_remove), + .id_table = isp1301_id, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c new file mode 100644 index 0000000..82a9bcb --- /dev/null +++ b/drivers/i2c/chips/mcu_mpc8349emitx.c @@ -0,0 +1,209 @@ +/* + * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU + * + * Copyright (c) 2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <asm/prom.h> +#include <asm/machdep.h> + +/* + * I don't have specifications for the MCU firmware, I found this register + * and bits positions by the trial&error method. + */ +#define MCU_REG_CTRL 0x20 +#define MCU_CTRL_POFF 0x40 + +#define MCU_NUM_GPIO 2 + +struct mcu { + struct mutex lock; + struct device_node *np; + struct i2c_client *client; + struct of_gpio_chip of_gc; + u8 reg_ctrl; +}; + +static struct mcu *glob_mcu; + +static void mcu_power_off(void) +{ + struct mcu *mcu = glob_mcu; + + pr_info("Sending power-off request to the MCU...\n"); + mutex_lock(&mcu->lock); + i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL, + mcu->reg_ctrl | MCU_CTRL_POFF); + mutex_unlock(&mcu->lock); +} + +static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_gpio_chip *of_gc = to_of_gpio_chip(gc); + struct mcu *mcu = container_of(of_gc, struct mcu, of_gc); + u8 bit = 1 << (4 + gpio); + + mutex_lock(&mcu->lock); + if (val) + mcu->reg_ctrl &= ~bit; + else + mcu->reg_ctrl |= bit; + + i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl); + mutex_unlock(&mcu->lock); +} + +static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + mcu_gpio_set(gc, gpio, val); + return 0; +} + +static int mcu_gpiochip_add(struct mcu *mcu) +{ + struct device_node *np; + struct of_gpio_chip *of_gc = &mcu->of_gc; + struct gpio_chip *gc = &of_gc->gc; + int ret; + + np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx"); + if (!np) + return -ENODEV; + + gc->owner = THIS_MODULE; + gc->label = np->full_name; + gc->can_sleep = 1; + gc->ngpio = MCU_NUM_GPIO; + gc->base = -1; + gc->set = mcu_gpio_set; + gc->direction_output = mcu_gpio_dir_out; + of_gc->gpio_cells = 2; + of_gc->xlate = of_gpio_simple_xlate; + + np->data = of_gc; + mcu->np = np; + + /* + * We don't want to lose the node, its ->data and ->full_name... + * So, if succeeded, we don't put the node here. + */ + ret = gpiochip_add(gc); + if (ret) + of_node_put(np); + return ret; +} + +static int mcu_gpiochip_remove(struct mcu *mcu) +{ + int ret; + + ret = gpiochip_remove(&mcu->of_gc.gc); + if (ret) + return ret; + of_node_put(mcu->np); + + return 0; +} + +static int __devinit mcu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mcu *mcu; + int ret; + + mcu = kzalloc(sizeof(*mcu), GFP_KERNEL); + if (!mcu) + return -ENOMEM; + + mutex_init(&mcu->lock); + mcu->client = client; + i2c_set_clientdata(client, mcu); + + ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); + if (ret < 0) + goto err; + mcu->reg_ctrl = ret; + + ret = mcu_gpiochip_add(mcu); + if (ret) + goto err; + + /* XXX: this is potentially racy, but there is no lock for ppc_md */ + if (!ppc_md.power_off) { + glob_mcu = mcu; + ppc_md.power_off = mcu_power_off; + dev_info(&client->dev, "will provide power-off service\n"); + } + + return 0; +err: + kfree(mcu); + return ret; +} + +static int __devexit mcu_remove(struct i2c_client *client) +{ + struct mcu *mcu = i2c_get_clientdata(client); + int ret; + + if (glob_mcu == mcu) { + ppc_md.power_off = NULL; + glob_mcu = NULL; + } + + ret = mcu_gpiochip_remove(mcu); + if (ret) + return ret; + i2c_set_clientdata(client, NULL); + kfree(mcu); + return 0; +} + +static const struct i2c_device_id mcu_ids[] = { + { "mcu-mpc8349emitx", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, mcu_ids); + +static struct i2c_driver mcu_driver = { + .driver = { + .name = "mcu-mpc8349emitx", + .owner = THIS_MODULE, + }, + .probe = mcu_probe, + .remove = __devexit_p(mcu_remove), + .id_table = mcu_ids, +}; + +static int __init mcu_init(void) +{ + return i2c_add_driver(&mcu_driver); +} +module_init(mcu_init); + +static void __exit mcu_exit(void) +{ + i2c_del_driver(&mcu_driver); +} +module_exit(mcu_exit); + +MODULE_DESCRIPTION("Power Management and GPIO expander driver for " + "MPC8349E-mITX-compatible MCU"); +MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c index 176126d..4b364ba 100644 --- a/drivers/i2c/chips/menelaus.c +++ b/drivers/i2c/chips/menelaus.c @@ -832,52 +832,52 @@ static irqreturn_t menelaus_irq(int irq, void *_menelaus) static void menelaus_to_time(char *regs, struct rtc_time *t) { - t->tm_sec = BCD2BIN(regs[0]); - t->tm_min = BCD2BIN(regs[1]); + t->tm_sec = bcd2bin(regs[0]); + t->tm_min = bcd2bin(regs[1]); if (the_menelaus->rtc_control & RTC_CTRL_MODE12) { - t->tm_hour = BCD2BIN(regs[2] & 0x1f) - 1; + t->tm_hour = bcd2bin(regs[2] & 0x1f) - 1; if (regs[2] & RTC_HR_PM) t->tm_hour += 12; } else - t->tm_hour = BCD2BIN(regs[2] & 0x3f); - t->tm_mday = BCD2BIN(regs[3]); - t->tm_mon = BCD2BIN(regs[4]) - 1; - t->tm_year = BCD2BIN(regs[5]) + 100; + t->tm_hour = bcd2bin(regs[2] & 0x3f); + t->tm_mday = bcd2bin(regs[3]); + t->tm_mon = bcd2bin(regs[4]) - 1; + t->tm_year = bcd2bin(regs[5]) + 100; } static int time_to_menelaus(struct rtc_time *t, int regnum) { int hour, status; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_sec)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_sec)); if (status < 0) goto fail; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_min)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_min)); if (status < 0) goto fail; if (the_menelaus->rtc_control & RTC_CTRL_MODE12) { hour = t->tm_hour + 1; if (hour > 12) - hour = RTC_HR_PM | BIN2BCD(hour - 12); + hour = RTC_HR_PM | bin2bcd(hour - 12); else - hour = BIN2BCD(hour); + hour = bin2bcd(hour); } else - hour = BIN2BCD(t->tm_hour); + hour = bin2bcd(t->tm_hour); status = menelaus_write_reg(regnum++, hour); if (status < 0) goto fail; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mday)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mday)); if (status < 0) goto fail; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mon + 1)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mon + 1)); if (status < 0) goto fail; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_year - 100)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_year - 100)); if (status < 0) goto fail; @@ -914,7 +914,7 @@ static int menelaus_read_time(struct device *dev, struct rtc_time *t) } menelaus_to_time(regs, t); - t->tm_wday = BCD2BIN(regs[6]); + t->tm_wday = bcd2bin(regs[6]); return 0; } @@ -927,7 +927,7 @@ static int menelaus_set_time(struct device *dev, struct rtc_time *t) status = time_to_menelaus(t, MENELAUS_RTC_SEC); if (status < 0) return status; - status = menelaus_write_reg(MENELAUS_RTC_WKDAY, BIN2BCD(t->tm_wday)); + status = menelaus_write_reg(MENELAUS_RTC_WKDAY, bin2bcd(t->tm_wday)); if (status < 0) { dev_err(&the_menelaus->client->dev, "rtc write reg %02x " "err %d\n", MENELAUS_RTC_WKDAY, status); diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index cf02e8f..acf8b9d 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -456,14 +456,17 @@ static irqreturn_t tps65010_irq(int irq, void *_tps) /* offsets 0..3 == GPIO1..GPIO4 * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes) + * offset 6 == vibrator motor driver */ static void tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { if (offset < 4) tps65010_set_gpio_out_value(offset + 1, value); - else + else if (offset < 6) tps65010_set_led(offset - 3, value ? ON : OFF); + else + tps65010_set_vib(value); } static int @@ -477,8 +480,10 @@ tps65010_output(struct gpio_chip *chip, unsigned offset, int value) if (!(tps->outmask & (1 << offset))) return -EINVAL; tps65010_set_gpio_out_value(offset + 1, value); - } else + } else if (offset < 6) tps65010_set_led(offset - 3, value ? ON : OFF); + else + tps65010_set_vib(value); return 0; } @@ -646,7 +651,7 @@ static int tps65010_probe(struct i2c_client *client, tps->chip.get = tps65010_gpio_get; tps->chip.base = board->base; - tps->chip.ngpio = 6; + tps->chip.ngpio = 7; tps->chip.can_sleep = 1; status = gpiochip_add(&tps->chip); @@ -675,6 +680,7 @@ static const struct i2c_device_id tps65010_id[] = { { "tps65011", TPS65011 }, { "tps65012", TPS65012 }, { "tps65013", TPS65013 }, + { "tps65014", TPS65011 }, /* tps65011 charging at 6.5V max */ { } }; MODULE_DEVICE_TABLE(i2c, tps65010_id); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b346a68..42e852d 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -437,6 +437,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap) { int res = 0, dummy; + /* Can't register until after driver model init */ + if (unlikely(WARN_ON(!i2c_bus_type.p))) + return -EAGAIN; + mutex_init(&adap->bus_lock); mutex_init(&adap->clist_lock); INIT_LIST_HEAD(&adap->clients); @@ -696,6 +700,10 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) { int res; + /* Can't register until after driver model init */ + if (unlikely(WARN_ON(!i2c_bus_type.p))) + return -EAGAIN; + /* new style driver methods can't mix with legacy ones */ if (is_newstyle_driver(driver)) { if (driver->attach_adapter || driver->detach_adapter @@ -978,7 +986,10 @@ static void __exit i2c_exit(void) bus_unregister(&i2c_bus_type); } -subsys_initcall(i2c_init); +/* We must initialize early, because some subsystems register i2c drivers + * in subsys_initcall() code, but are linked (and initialized) before i2c. + */ +postcore_initcall(i2c_init); module_exit(i2c_exit); /* ---------------------------------------------------- @@ -1677,6 +1688,28 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value) EXPORT_SYMBOL(i2c_smbus_write_word_data); /** + * i2c_smbus_process_call - SMBus "process call" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: 16-bit "word" being written + * + * This executes the SMBus "process call" protocol, returning negative errno + * else a 16-bit unsigned "word" received from the device. + */ +s32 i2c_smbus_process_call(struct i2c_client *client, u8 command, u16 value) +{ + union i2c_smbus_data data; + int status; + data.word = value; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_PROC_CALL, &data); + return (status < 0) ? status : data.word; +} +EXPORT_SYMBOL(i2c_smbus_process_call); + +/** * i2c_smbus_read_block_data - SMBus "block read" protocol * @client: Handle to slave device * @command: Byte interpreted by slave diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 307d976..c171988 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -521,9 +521,9 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) return PTR_ERR(i2c_dev); /* register this i2c device with the driver core */ - i2c_dev->dev = device_create_drvdata(i2c_dev_class, &adap->dev, - MKDEV(I2C_MAJOR, adap->nr), - NULL, "i2c-%d", adap->nr); + i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, + MKDEV(I2C_MAJOR, adap->nr), NULL, + "i2c-%d", adap->nr); if (IS_ERR(i2c_dev->dev)) { res = PTR_ERR(i2c_dev->dev); goto error; |