diff options
Diffstat (limited to 'drivers/ieee1394/sbp2.h')
| -rw-r--r-- | drivers/ieee1394/sbp2.h | 64 |
1 files changed, 23 insertions, 41 deletions
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index 900ea1d..e2d357a 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -33,15 +33,17 @@ #define ORB_DIRECTION_NO_DATA_TRANSFER 0x2 #define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31) -#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31) -#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */ +#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31) +#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */ #define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16) -#define ORB_SET_DATA_SIZE(value) (value & 0xffff) -#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16) -#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19) -#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20) -#define ORB_SET_SPEED(value) ((value & 0x7) << 24) -#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27) +#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id)) +#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff) +#define ORB_SET_DATA_SIZE(value) (value & 0xffff) +#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16) +#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19) +#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20) +#define ORB_SET_SPEED(value) ((value & 0x7) << 24) +#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27) struct sbp2_command_orb { volatile u32 next_ORB_hi; @@ -76,8 +78,8 @@ struct sbp2_login_orb { u32 login_response_lo; u32 lun_misc; u32 passwd_resp_lengths; - u32 status_FIFO_hi; - u32 status_FIFO_lo; + u32 status_fifo_hi; + u32 status_fifo_lo; }; #define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff) @@ -102,8 +104,8 @@ struct sbp2_query_logins_orb { u32 query_response_lo; u32 lun_misc; u32 reserved_resp_length; - u32 status_FIFO_hi; - u32 status_FIFO_lo; + u32 status_fifo_hi; + u32 status_fifo_lo; }; #define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff) @@ -123,8 +125,8 @@ struct sbp2_reconnect_orb { u32 reserved4; u32 login_ID_misc; u32 reserved5; - u32 status_FIFO_hi; - u32 status_FIFO_lo; + u32 status_fifo_hi; + u32 status_fifo_lo; }; struct sbp2_logout_orb { @@ -134,8 +136,8 @@ struct sbp2_logout_orb { u32 reserved4; u32 login_ID_misc; u32 reserved5; - u32 status_FIFO_hi; - u32 status_FIFO_lo; + u32 status_fifo_hi; + u32 status_fifo_lo; }; #define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff) @@ -195,30 +197,6 @@ struct sbp2_status_block { * Miscellaneous SBP2 related config rom defines */ -/* The status fifo address definition below is used as a base for each - * node, which a chunk seperately assigned to each unit directory in the - * node. For example, 0xfffe00000000ULL is used for the first sbp2 device - * detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node - * 0, and so on. - * - * Note: We could use a single status fifo address for all sbp2 devices, - * and figure out which sbp2 device the status belongs to by looking at - * the source node id of the status write... but, using separate addresses - * for each sbp2 unit directory allows for better code and the ability to - * support multiple luns within a single 1394 node. - * - * Also note that we choose the address range below as it is a region - * specified for write posting, where the ohci controller will - * automatically send an ack_complete when the status is written by the - * sbp2 device... saving a split transaction. =) - */ -#define SBP2_STATUS_FIFO_ADDRESS 0xfffe00000000ULL -#define SBP2_STATUS_FIFO_ADDRESS_HI 0xfffe -#define SBP2_STATUS_FIFO_ADDRESS_LO 0x0 - -#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry) ((entry) << 5) -#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset) ((offset) >> 5) - #define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1 #define SBP2_CSR_OFFSET_KEY 0x54 #define SBP2_UNIT_SPEC_ID_KEY 0x12 @@ -258,7 +236,6 @@ struct sbp2_status_block { */ #define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000 -#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */ #define SBP2_MAX_SECTORS 255 /* Max sectors supported */ #define SBP2_MAX_CMDS 8 /* This should be safe */ @@ -338,6 +315,11 @@ struct scsi_id_instance_data { u32 sbp2_firmware_revision; /* + * Address for the device to write status blocks to + */ + u64 status_fifo_addr; + + /* * Variable used for logins, reconnects, logouts, query logins */ atomic_t sbp2_login_complete; |