summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/touchscreen')
-rw-r--r--drivers/input/touchscreen/Kconfig17
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/ad7877.c2
-rw-r--r--drivers/input/touchscreen/ad7879-spi.c1
-rw-r--r--drivers/input/touchscreen/cyttsp4_core.c2
-rw-r--r--drivers/input/touchscreen/cyttsp4_spi.c5
-rw-r--r--drivers/input/touchscreen/egalax_ts.c2
-rw-r--r--drivers/input/touchscreen/htcpen.c2
-rw-r--r--drivers/input/touchscreen/st1232.c1
-rw-r--r--drivers/input/touchscreen/ti_am335x_tsc.c295
-rw-r--r--drivers/input/touchscreen/tsc2005.c2
-rw-r--r--drivers/input/touchscreen/zforce_ts.c836
12 files changed, 1065 insertions, 101 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 3b9758b..00d1e54 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -389,7 +389,7 @@ config TOUCHSCREEN_MCS5000
config TOUCHSCREEN_MMS114
tristate "MELFAS MMS114 touchscreen"
- depends on I2C && GENERIC_HARDIRQS
+ depends on I2C
help
Say Y here if you have the MELFAS MMS114 touchscreen controller
chip in your system.
@@ -845,7 +845,7 @@ config TOUCHSCREEN_TSC_SERIO
config TOUCHSCREEN_TSC2005
tristate "TSC2005 based touchscreens"
- depends on SPI_MASTER && GENERIC_HARDIRQS
+ depends on SPI_MASTER
help
Say Y here if you have a TSC2005 based touchscreen.
@@ -919,4 +919,17 @@ config TOUCHSCREEN_TPS6507X
To compile this driver as a module, choose M here: the
module will be called tps6507x_ts.
+config TOUCHSCREEN_ZFORCE
+ tristate "Neonode zForce infrared touchscreens"
+ depends on I2C
+ depends on GPIOLIB
+ help
+ Say Y here if you have a touchscreen using the zforce
+ infraread technology from Neonode.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zforce_ts.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index f5216c1..7587883 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -75,3 +75,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index f3a174a..69834dd 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -806,7 +806,6 @@ err_free_irq:
err_free_mem:
input_free_device(input_dev);
kfree(ts);
- spi_set_drvdata(spi, NULL);
return err;
}
@@ -823,7 +822,6 @@ static int ad7877_remove(struct spi_device *spi)
kfree(ts);
dev_dbg(&spi->dev, "unregistered touchscreen\n");
- spi_set_drvdata(spi, NULL);
return 0;
}
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
index 606da5b..1a7b114 100644
--- a/drivers/input/touchscreen/ad7879-spi.c
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -142,7 +142,6 @@ static int ad7879_spi_remove(struct spi_device *spi)
struct ad7879 *ts = spi_get_drvdata(spi);
ad7879_remove(ts);
- spi_set_drvdata(spi, NULL);
return 0;
}
diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c
index d038575..42d830e 100644
--- a/drivers/input/touchscreen/cyttsp4_core.c
+++ b/drivers/input/touchscreen/cyttsp4_core.c
@@ -2113,7 +2113,6 @@ error_startup:
error_request_irq:
if (cd->cpdata->init)
cd->cpdata->init(cd->cpdata, 0, dev);
- dev_set_drvdata(dev, NULL);
error_free_xfer:
kfree(cd->xfer_buf);
error_free_cd:
@@ -2151,7 +2150,6 @@ int cyttsp4_remove(struct cyttsp4 *cd)
free_irq(cd->irq, cd);
if (cd->cpdata->init)
cd->cpdata->init(cd->cpdata, 0, dev);
- dev_set_drvdata(dev, NULL);
cyttsp4_free_si_ptrs(cd);
kfree(cd);
return 0;
diff --git a/drivers/input/touchscreen/cyttsp4_spi.c b/drivers/input/touchscreen/cyttsp4_spi.c
index a71e114..b19434c 100644
--- a/drivers/input/touchscreen/cyttsp4_spi.c
+++ b/drivers/input/touchscreen/cyttsp4_spi.c
@@ -171,10 +171,7 @@ static int cyttsp4_spi_probe(struct spi_device *spi)
ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
CY_SPI_DATA_BUF_SIZE);
- if (IS_ERR(ts))
- return PTR_ERR(ts);
-
- return 0;
+ return PTR_ERR_OR_ZERO(ts);
}
static int cyttsp4_spi_remove(struct spi_device *spi)
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index ef5fcb0..054d225 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -273,7 +273,7 @@ static struct i2c_driver egalax_ts_driver = {
.name = "egalax_ts",
.owner = THIS_MODULE,
.pm = &egalax_ts_pm_ops,
- .of_match_table = of_match_ptr(egalax_ts_dt_ids),
+ .of_match_table = egalax_ts_dt_ids,
},
.id_table = egalax_ts_id,
.probe = egalax_ts_probe,
diff --git a/drivers/input/touchscreen/htcpen.c b/drivers/input/touchscreen/htcpen.c
index 6650085..92e2243 100644
--- a/drivers/input/touchscreen/htcpen.c
+++ b/drivers/input/touchscreen/htcpen.c
@@ -186,8 +186,6 @@ static int htcpen_isa_remove(struct device *dev, unsigned int id)
release_region(HTCPEN_PORT_INIT, 1);
release_region(HTCPEN_PORT_IRQ_CLEAR, 1);
- dev_set_drvdata(dev, NULL);
-
return 0;
}
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 1740a24..2f03b2f 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pm_qos.h>
#include <linux/slab.h>
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 50fb129..ad75642 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -24,8 +24,9 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/input/ti_am335x_tsc.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/ti_am335x_tscadc.h>
@@ -33,6 +34,13 @@
#define SEQ_SETTLE 275
#define MAX_12BIT ((1 << 12) - 1)
+static const int config_pins[] = {
+ STEPCONFIG_XPP,
+ STEPCONFIG_XNN,
+ STEPCONFIG_YPP,
+ STEPCONFIG_YNN,
+};
+
struct titsc {
struct input_dev *input;
struct ti_tscadc_dev *mfd_tscadc;
@@ -40,7 +48,10 @@ struct titsc {
unsigned int wires;
unsigned int x_plate_resistance;
bool pen_down;
- int steps_to_configure;
+ int coordinate_readouts;
+ u32 config_inp[4];
+ u32 bit_xp, bit_xn, bit_yp, bit_yn;
+ u32 inp_xp, inp_xn, inp_yp, inp_yn;
};
static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
@@ -54,92 +65,153 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg,
writel(val, tsc->mfd_tscadc->tscadc_base + reg);
}
+static int titsc_config_wires(struct titsc *ts_dev)
+{
+ u32 analog_line[4];
+ u32 wire_order[4];
+ int i, bit_cfg;
+
+ for (i = 0; i < 4; i++) {
+ /*
+ * Get the order in which TSC wires are attached
+ * w.r.t. each of the analog input lines on the EVM.
+ */
+ analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
+ wire_order[i] = ts_dev->config_inp[i] & 0x0F;
+ if (WARN_ON(analog_line[i] > 7))
+ return -EINVAL;
+ if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 4; i++) {
+ int an_line;
+ int wi_order;
+
+ an_line = analog_line[i];
+ wi_order = wire_order[i];
+ bit_cfg = config_pins[wi_order];
+ if (bit_cfg == 0)
+ return -EINVAL;
+ switch (wi_order) {
+ case 0:
+ ts_dev->bit_xp = bit_cfg;
+ ts_dev->inp_xp = an_line;
+ break;
+
+ case 1:
+ ts_dev->bit_xn = bit_cfg;
+ ts_dev->inp_xn = an_line;
+ break;
+
+ case 2:
+ ts_dev->bit_yp = bit_cfg;
+ ts_dev->inp_yp = an_line;
+ break;
+ case 3:
+ ts_dev->bit_yn = bit_cfg;
+ ts_dev->inp_yn = an_line;
+ break;
+ }
+ }
+ return 0;
+}
+
static void titsc_step_config(struct titsc *ts_dev)
{
unsigned int config;
- int i, total_steps;
-
- /* Configure the Step registers */
- total_steps = 2 * ts_dev->steps_to_configure;
+ int i;
+ int end_step;
+ u32 stepenable;
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
+ STEPCONFIG_AVG_16 | ts_dev->bit_xp;
switch (ts_dev->wires) {
case 4:
- config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+ config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
break;
case 5:
- config |= STEPCONFIG_YNN |
- STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
- STEPCONFIG_YPP;
+ config |= ts_dev->bit_yn |
+ STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
+ ts_dev->bit_yp;
break;
case 8:
- config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+ config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
break;
}
- for (i = 1; i <= ts_dev->steps_to_configure; i++) {
+ /* 1 … coordinate_readouts is for X */
+ end_step = ts_dev->coordinate_readouts;
+ for (i = 0; i < end_step; i++) {
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
}
config = 0;
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
- STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
+ STEPCONFIG_AVG_16 | ts_dev->bit_yn |
+ STEPCONFIG_INM_ADCREFM;
switch (ts_dev->wires) {
case 4:
- config |= STEPCONFIG_YPP;
+ config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
break;
case 5:
- config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
- STEPCONFIG_XNP | STEPCONFIG_YPN;
+ config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
+ ts_dev->bit_xn | ts_dev->bit_yp;
break;
case 8:
- config |= STEPCONFIG_YPP;
+ config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
break;
}
- for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
+ /* coordinate_readouts … coordinate_readouts * 2 is for Y */
+ end_step = ts_dev->coordinate_readouts * 2;
+ for (i = ts_dev->coordinate_readouts; i < end_step; i++) {
titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
}
- config = 0;
/* Charge step configuration */
- config = STEPCONFIG_XPP | STEPCONFIG_YNN |
+ config = ts_dev->bit_xp | ts_dev->bit_yn |
STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
- STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
+ STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp);
titsc_writel(ts_dev, REG_CHARGECONFIG, config);
titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
- config = 0;
- /* Configure to calculate pressure */
+ /* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */
config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
- STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
- titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
- titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
+ STEPCONFIG_AVG_16 | ts_dev->bit_yp |
+ ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
+ STEPCONFIG_INP(ts_dev->inp_xp);
+ titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(end_step),
STEPCONFIG_OPENDLY);
- config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
- titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
- titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
+ end_step++;
+ config |= STEPCONFIG_INP(ts_dev->inp_yn);
+ titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(end_step),
STEPCONFIG_OPENDLY);
- titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+ /* The steps1 … end and bit 0 for TS_Charge */
+ stepenable = (1 << (end_step + 2)) - 1;
+ am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable);
}
static void titsc_read_coordinates(struct titsc *ts_dev,
- unsigned int *x, unsigned int *y)
+ u32 *x, u32 *y, u32 *z1, u32 *z2)
{
unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
unsigned int prev_val_x = ~0, prev_val_y = ~0;
unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
unsigned int read, diff;
unsigned int i, channel;
+ unsigned int creads = ts_dev->coordinate_readouts;
+ *z1 = *z2 = 0;
+ if (fifocount % (creads * 2 + 2))
+ fifocount -= fifocount % (creads * 2 + 2);
/*
* Delta filter is used to remove large variations in sampled
* values from ADC. The filter tries to predict where the next
@@ -148,32 +220,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
* algorithm compares the difference with that of a present value,
* if true the value is reported to the sub system.
*/
- for (i = 0; i < fifocount - 1; i++) {
+ for (i = 0; i < fifocount; i++) {
read = titsc_readl(ts_dev, REG_FIFO0);
- channel = read & 0xf0000;
- channel = channel >> 0x10;
- if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
- read &= 0xfff;
+
+ channel = (read & 0xf0000) >> 16;
+ read &= 0xfff;
+ if (channel < creads) {
diff = abs(read - prev_val_x);
if (diff < prev_diff_x) {
prev_diff_x = diff;
*x = read;
}
prev_val_x = read;
- }
- read = titsc_readl(ts_dev, REG_FIFO1);
- channel = read & 0xf0000;
- channel = channel >> 0x10;
- if ((channel >= ts_dev->steps_to_configure) &&
- (channel < (2 * ts_dev->steps_to_configure - 1))) {
- read &= 0xfff;
+ } else if (channel < creads * 2) {
diff = abs(read - prev_val_y);
if (diff < prev_diff_y) {
prev_diff_y = diff;
*y = read;
}
prev_val_y = read;
+
+ } else if (channel < creads * 2 + 1) {
+ *z1 = read;
+
+ } else if (channel < creads * 2 + 2) {
+ *z2 = read;
}
}
}
@@ -186,23 +258,11 @@ static irqreturn_t titsc_irq(int irq, void *dev)
unsigned int x = 0, y = 0;
unsigned int z1, z2, z;
unsigned int fsm;
- unsigned int fifo1count, fifo0count;
- int i;
status = titsc_readl(ts_dev, REG_IRQSTATUS);
if (status & IRQENB_FIFO0THRES) {
- titsc_read_coordinates(ts_dev, &x, &y);
- z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
- z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
-
- fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
- for (i = 0; i < fifo1count; i++)
- titsc_readl(ts_dev, REG_FIFO1);
-
- fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
- for (i = 0; i < fifo0count; i++)
- titsc_readl(ts_dev, REG_FIFO0);
+ titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
/*
@@ -210,10 +270,10 @@ static irqreturn_t titsc_irq(int irq, void *dev)
* Resistance(touch) = x plate resistance *
* x postion/4096 * ((z2 / z1) - 1)
*/
- z = z2 - z1;
+ z = z1 - z2;
z *= x;
z *= ts_dev->x_plate_resistance;
- z /= z1;
+ z /= z2;
z = (z + 2047) >> 12;
if (z <= MAX_12BIT) {
@@ -248,10 +308,60 @@ static irqreturn_t titsc_irq(int irq, void *dev)
irqclr |= IRQENB_PENUP;
}
- titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+ if (status & IRQENB_HW_PEN) {
+
+ titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00);
+ titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+ }
+
+ if (irqclr) {
+ titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+ am335x_tsc_se_update(ts_dev->mfd_tscadc);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static int titsc_parse_dt(struct platform_device *pdev,
+ struct titsc *ts_dev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ int err;
+
+ if (!node)
+ return -EINVAL;
+
+ err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
+ if (err < 0)
+ return err;
+ switch (ts_dev->wires) {
+ case 4:
+ case 5:
+ case 8:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = of_property_read_u32(node, "ti,x-plate-resistance",
+ &ts_dev->x_plate_resistance);
+ if (err < 0)
+ return err;
- titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
- return IRQ_HANDLED;
+ /*
+ * Try with the new binding first. If it fails, try again with
+ * bogus, miss-spelled version.
+ */
+ err = of_property_read_u32(node, "ti,coordinate-readouts",
+ &ts_dev->coordinate_readouts);
+ if (err < 0)
+ err = of_property_read_u32(node, "ti,coordiante-readouts",
+ &ts_dev->coordinate_readouts);
+ if (err < 0)
+ return err;
+
+ return of_property_read_u32_array(node, "ti,wire-config",
+ ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
}
/*
@@ -262,17 +372,9 @@ static int titsc_probe(struct platform_device *pdev)
{
struct titsc *ts_dev;
struct input_dev *input_dev;
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct mfd_tscadc_board *pdata;
+ struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
int err;
- pdata = tscadc_dev->dev->platform_data;
-
- if (!pdata) {
- dev_err(&pdev->dev, "Could not find platform data\n");
- return -EINVAL;
- }
-
/* Allocate memory for device */
ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
input_dev = input_allocate_device();
@@ -286,9 +388,12 @@ static int titsc_probe(struct platform_device *pdev)
ts_dev->mfd_tscadc = tscadc_dev;
ts_dev->input = input_dev;
ts_dev->irq = tscadc_dev->irq;
- ts_dev->wires = pdata->tsc_init->wires;
- ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
- ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
+
+ err = titsc_parse_dt(pdev, ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "Could not find valid DT data.\n");
+ goto err_free_mem;
+ }
err = request_irq(ts_dev->irq, titsc_irq,
0, pdev->dev.driver->name, ts_dev);
@@ -298,8 +403,14 @@ static int titsc_probe(struct platform_device *pdev)
}
titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
+ err = titsc_config_wires(ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "wrong i/p wire configuration\n");
+ goto err_free_irq;
+ }
titsc_step_config(ts_dev);
- titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
+ titsc_writel(ts_dev, REG_FIFO0THR,
+ ts_dev->coordinate_readouts * 2 + 2 - 1);
input_dev->name = "ti-tsc";
input_dev->dev.parent = &pdev->dev;
@@ -329,11 +440,16 @@ err_free_mem:
static int titsc_remove(struct platform_device *pdev)
{
- struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = platform_get_drvdata(pdev);
+ u32 steps;
free_irq(ts_dev->irq, ts_dev);
+ /* total steps followed by the enable mask */
+ steps = 2 * ts_dev->coordinate_readouts + 2;
+ steps = (1 << steps) - 1;
+ am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);
+
input_unregister_device(ts_dev->input);
kfree(ts_dev);
@@ -343,10 +459,11 @@ static int titsc_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int titsc_suspend(struct device *dev)
{
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = dev_get_drvdata(dev);
+ struct ti_tscadc_dev *tscadc_dev;
unsigned int idle;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (device_may_wakeup(tscadc_dev->dev)) {
idle = titsc_readl(ts_dev, REG_IRQENABLE);
titsc_writel(ts_dev, REG_IRQENABLE,
@@ -358,9 +475,10 @@ static int titsc_suspend(struct device *dev)
static int titsc_resume(struct device *dev)
{
- struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
- struct titsc *ts_dev = tscadc_dev->tsc;
+ struct titsc *ts_dev = dev_get_drvdata(dev);
+ struct ti_tscadc_dev *tscadc_dev;
+ tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
if (device_may_wakeup(tscadc_dev->dev)) {
titsc_writel(ts_dev, REG_IRQWAKEUP,
0x00);
@@ -368,7 +486,7 @@ static int titsc_resume(struct device *dev)
}
titsc_step_config(ts_dev);
titsc_writel(ts_dev, REG_FIFO0THR,
- ts_dev->steps_to_configure);
+ ts_dev->coordinate_readouts * 2 + 2 - 1);
return 0;
}
@@ -381,13 +499,20 @@ static const struct dev_pm_ops titsc_pm_ops = {
#define TITSC_PM_OPS NULL
#endif
+static const struct of_device_id ti_tsc_dt_ids[] = {
+ { .compatible = "ti,am3359-tsc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);
+
static struct platform_driver ti_tsc_driver = {
.probe = titsc_probe,
.remove = titsc_remove,
.driver = {
- .name = "tsc",
+ .name = "TI-am335x-tsc",
.owner = THIS_MODULE,
.pm = TITSC_PM_OPS,
+ .of_match_table = ti_tsc_dt_ids,
},
};
module_platform_driver(ti_tsc_driver);
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index 7213e8b..8113533 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -678,7 +678,6 @@ static int tsc2005_probe(struct spi_device *spi)
err_remove_sysfs:
sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
err_clear_drvdata:
- spi_set_drvdata(spi, NULL);
free_irq(spi->irq, ts);
err_free_mem:
input_free_device(input_dev);
@@ -696,7 +695,6 @@ static int tsc2005_remove(struct spi_device *spi)
input_unregister_device(ts->idev);
kfree(ts);
- spi_set_drvdata(spi, NULL);
return 0;
}
diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
new file mode 100644
index 0000000..75762d6
--- /dev/null
+++ b/drivers/input/touchscreen/zforce_ts.c
@@ -0,0 +1,836 @@
+/*
+ * Copyright (C) 2012-2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * based in parts on Nook zforce driver
+ *
+ * Copyright (C) 2010 Barnes & Noble, Inc.
+ * Author: Pieter Truter<ptruter@intrinsyc.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/hrtimer.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/input/mt.h>
+#include <linux/platform_data/zforce_ts.h>
+
+#define WAIT_TIMEOUT msecs_to_jiffies(1000)
+
+#define FRAME_START 0xee
+
+/* Offsets of the different parts of the payload the controller sends */
+#define PAYLOAD_HEADER 0
+#define PAYLOAD_LENGTH 1
+#define PAYLOAD_BODY 2
+
+/* Response offsets */
+#define RESPONSE_ID 0
+#define RESPONSE_DATA 1
+
+/* Commands */
+#define COMMAND_DEACTIVATE 0x00
+#define COMMAND_INITIALIZE 0x01
+#define COMMAND_RESOLUTION 0x02
+#define COMMAND_SETCONFIG 0x03
+#define COMMAND_DATAREQUEST 0x04
+#define COMMAND_SCANFREQ 0x08
+#define COMMAND_STATUS 0X1e
+
+/*
+ * Responses the controller sends as a result of
+ * command requests
+ */
+#define RESPONSE_DEACTIVATE 0x00
+#define RESPONSE_INITIALIZE 0x01
+#define RESPONSE_RESOLUTION 0x02
+#define RESPONSE_SETCONFIG 0x03
+#define RESPONSE_SCANFREQ 0x08
+#define RESPONSE_STATUS 0X1e
+
+/*
+ * Notifications are send by the touch controller without
+ * being requested by the driver and include for example
+ * touch indications
+ */
+#define NOTIFICATION_TOUCH 0x04
+#define NOTIFICATION_BOOTCOMPLETE 0x07
+#define NOTIFICATION_OVERRUN 0x25
+#define NOTIFICATION_PROXIMITY 0x26
+#define NOTIFICATION_INVALID_COMMAND 0xfe
+
+#define ZFORCE_REPORT_POINTS 2
+#define ZFORCE_MAX_AREA 0xff
+
+#define STATE_DOWN 0
+#define STATE_MOVE 1
+#define STATE_UP 2
+
+#define SETCONFIG_DUALTOUCH (1 << 0)
+
+struct zforce_point {
+ int coord_x;
+ int coord_y;
+ int state;
+ int id;
+ int area_major;
+ int area_minor;
+ int orientation;
+ int pressure;
+ int prblty;
+};
+
+/*
+ * @client the i2c_client
+ * @input the input device
+ * @suspending in the process of going to suspend (don't emit wakeup
+ * events for commands executed to suspend the device)
+ * @suspended device suspended
+ * @access_mutex serialize i2c-access, to keep multipart reads together
+ * @command_done completion to wait for the command result
+ * @command_mutex serialize commands send to the ic
+ * @command_waiting the id of the command that that is currently waiting
+ * for a result
+ * @command_result returned result of the command
+ */
+struct zforce_ts {
+ struct i2c_client *client;
+ struct input_dev *input;
+ const struct zforce_ts_platdata *pdata;
+ char phys[32];
+
+ bool suspending;
+ bool suspended;
+ bool boot_complete;
+
+ /* Firmware version information */
+ u16 version_major;
+ u16 version_minor;
+ u16 version_build;
+ u16 version_rev;
+
+ struct mutex access_mutex;
+
+ struct completion command_done;
+ struct mutex command_mutex;
+ int command_waiting;
+ int command_result;
+};
+
+static int zforce_command(struct zforce_ts *ts, u8 cmd)
+{
+ struct i2c_client *client = ts->client;
+ char buf[3];
+ int ret;
+
+ dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
+
+ buf[0] = FRAME_START;
+ buf[1] = 1; /* data size, command only */
+ buf[2] = cmd;
+
+ mutex_lock(&ts->access_mutex);
+ ret = i2c_master_send(client, &buf[0], ARRAY_SIZE(buf));
+ mutex_unlock(&ts->access_mutex);
+ if (ret < 0) {
+ dev_err(&client->dev, "i2c send data request error: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int zforce_send_wait(struct zforce_ts *ts, const char *buf, int len)
+{
+ struct i2c_client *client = ts->client;
+ int ret;
+
+ ret = mutex_trylock(&ts->command_mutex);
+ if (!ret) {
+ dev_err(&client->dev, "already waiting for a command\n");
+ return -EBUSY;
+ }
+
+ dev_dbg(&client->dev, "sending %d bytes for command 0x%x\n",
+ buf[1], buf[2]);
+
+ ts->command_waiting = buf[2];
+
+ mutex_lock(&ts->access_mutex);
+ ret = i2c_master_send(client, buf, len);
+ mutex_unlock(&ts->access_mutex);
+ if (ret < 0) {
+ dev_err(&client->dev, "i2c send data request error: %d\n", ret);
+ goto unlock;
+ }
+
+ dev_dbg(&client->dev, "waiting for result for command 0x%x\n", buf[2]);
+
+ if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0) {
+ ret = -ETIME;
+ goto unlock;
+ }
+
+ ret = ts->command_result;
+
+unlock:
+ mutex_unlock(&ts->command_mutex);
+ return ret;
+}
+
+static int zforce_command_wait(struct zforce_ts *ts, u8 cmd)
+{
+ struct i2c_client *client = ts->client;
+ char buf[3];
+ int ret;
+
+ dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
+
+ buf[0] = FRAME_START;
+ buf[1] = 1; /* data size, command only */
+ buf[2] = cmd;
+
+ ret = zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+ if (ret < 0) {
+ dev_err(&client->dev, "i2c send data request error: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int zforce_resolution(struct zforce_ts *ts, u16 x, u16 y)
+{
+ struct i2c_client *client = ts->client;
+ char buf[7] = { FRAME_START, 5, COMMAND_RESOLUTION,
+ (x & 0xff), ((x >> 8) & 0xff),
+ (y & 0xff), ((y >> 8) & 0xff) };
+
+ dev_dbg(&client->dev, "set resolution to (%d,%d)\n", x, y);
+
+ return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+}
+
+static int zforce_scan_frequency(struct zforce_ts *ts, u16 idle, u16 finger,
+ u16 stylus)
+{
+ struct i2c_client *client = ts->client;
+ char buf[9] = { FRAME_START, 7, COMMAND_SCANFREQ,
+ (idle & 0xff), ((idle >> 8) & 0xff),
+ (finger & 0xff), ((finger >> 8) & 0xff),
+ (stylus & 0xff), ((stylus >> 8) & 0xff) };
+
+ dev_dbg(&client->dev, "set scan frequency to (idle: %d, finger: %d, stylus: %d)\n",
+ idle, finger, stylus);
+
+ return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+}
+
+static int zforce_setconfig(struct zforce_ts *ts, char b1)
+{
+ struct i2c_client *client = ts->client;
+ char buf[7] = { FRAME_START, 5, COMMAND_SETCONFIG,
+ b1, 0, 0, 0 };
+
+ dev_dbg(&client->dev, "set config to (%d)\n", b1);
+
+ return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+}
+
+static int zforce_start(struct zforce_ts *ts)
+{
+ struct i2c_client *client = ts->client;
+ const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
+ int ret;
+
+ dev_dbg(&client->dev, "starting device\n");
+
+ ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
+ if (ret) {
+ dev_err(&client->dev, "Unable to initialize, %d\n", ret);
+ return ret;
+ }
+
+ ret = zforce_resolution(ts, pdata->x_max, pdata->y_max);
+ if (ret) {
+ dev_err(&client->dev, "Unable to set resolution, %d\n", ret);
+ goto error;
+ }
+
+ ret = zforce_scan_frequency(ts, 10, 50, 50);
+ if (ret) {
+ dev_err(&client->dev, "Unable to set scan frequency, %d\n",
+ ret);
+ goto error;
+ }
+
+ if (zforce_setconfig(ts, SETCONFIG_DUALTOUCH)) {
+ dev_err(&client->dev, "Unable to set config\n");
+ goto error;
+ }
+
+ /* start sending touch events */
+ ret = zforce_command(ts, COMMAND_DATAREQUEST);
+ if (ret) {
+ dev_err(&client->dev, "Unable to request data\n");
+ goto error;
+ }
+
+ /*
+ * Per NN, initial cal. take max. of 200msec.
+ * Allow time to complete this calibration
+ */
+ msleep(200);
+
+ return 0;
+
+error:
+ zforce_command_wait(ts, COMMAND_DEACTIVATE);
+ return ret;
+}
+
+static int zforce_stop(struct zforce_ts *ts)
+{
+ struct i2c_client *client = ts->client;
+ int ret;
+
+ dev_dbg(&client->dev, "stopping device\n");
+
+ /* Deactivates touch sensing and puts the device into sleep. */
+ ret = zforce_command_wait(ts, COMMAND_DEACTIVATE);
+ if (ret != 0) {
+ dev_err(&client->dev, "could not deactivate device, %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
+{
+ struct i2c_client *client = ts->client;
+ const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
+ struct zforce_point point;
+ int count, i, num = 0;
+
+ count = payload[0];
+ if (count > ZFORCE_REPORT_POINTS) {
+ dev_warn(&client->dev, "to many coordinates %d, expected max %d\n",
+ count, ZFORCE_REPORT_POINTS);
+ count = ZFORCE_REPORT_POINTS;
+ }
+
+ for (i = 0; i < count; i++) {
+ point.coord_x =
+ payload[9 * i + 2] << 8 | payload[9 * i + 1];
+ point.coord_y =
+ payload[9 * i + 4] << 8 | payload[9 * i + 3];
+
+ if (point.coord_x > pdata->x_max ||
+ point.coord_y > pdata->y_max) {
+ dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
+ point.coord_x, point.coord_y);
+ point.coord_x = point.coord_y = 0;
+ }
+
+ point.state = payload[9 * i + 5] & 0x03;
+ point.id = (payload[9 * i + 5] & 0xfc) >> 2;
+
+ /* determine touch major, minor and orientation */
+ point.area_major = max(payload[9 * i + 6],
+ payload[9 * i + 7]);
+ point.area_minor = min(payload[9 * i + 6],
+ payload[9 * i + 7]);
+ point.orientation = payload[9 * i + 6] > payload[9 * i + 7];
+
+ point.pressure = payload[9 * i + 8];
+ point.prblty = payload[9 * i + 9];
+
+ dev_dbg(&client->dev,
+ "point %d/%d: state %d, id %d, pressure %d, prblty %d, x %d, y %d, amajor %d, aminor %d, ori %d\n",
+ i, count, point.state, point.id,
+ point.pressure, point.prblty,
+ point.coord_x, point.coord_y,
+ point.area_major, point.area_minor,
+ point.orientation);
+
+ /* the zforce id starts with "1", so needs to be decreased */
+ input_mt_slot(ts->input, point.id - 1);
+
+ input_mt_report_slot_state(ts->input, MT_TOOL_FINGER,
+ point.state != STATE_UP);
+
+ if (point.state != STATE_UP) {
+ input_report_abs(ts->input, ABS_MT_POSITION_X,
+ point.coord_x);
+ input_report_abs(ts->input, ABS_MT_POSITION_Y,
+ point.coord_y);
+ input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
+ point.area_major);
+ input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
+ point.area_minor);
+ input_report_abs(ts->input, ABS_MT_ORIENTATION,
+ point.orientation);
+ num++;
+ }
+ }
+
+ input_mt_sync_frame(ts->input);
+
+ input_mt_report_finger_count(ts->input, num);
+
+ input_sync(ts->input);
+
+ return 0;
+}
+
+static int zforce_read_packet(struct zforce_ts *ts, u8 *buf)
+{
+ struct i2c_client *client = ts->client;
+ int ret;
+
+ mutex_lock(&ts->access_mutex);
+
+ /* read 2 byte message header */
+ ret = i2c_master_recv(client, buf, 2);
+ if (ret < 0) {
+ dev_err(&client->dev, "error reading header: %d\n", ret);
+ goto unlock;
+ }
+
+ if (buf[PAYLOAD_HEADER] != FRAME_START) {
+ dev_err(&client->dev, "invalid frame start: %d\n", buf[0]);
+ ret = -EIO;
+ goto unlock;
+ }
+
+ if (buf[PAYLOAD_LENGTH] <= 0 || buf[PAYLOAD_LENGTH] > 255) {
+ dev_err(&client->dev, "invalid payload length: %d\n",
+ buf[PAYLOAD_LENGTH]);
+ ret = -EIO;
+ goto unlock;
+ }
+
+ /* read the message */
+ ret = i2c_master_recv(client, &buf[PAYLOAD_BODY], buf[PAYLOAD_LENGTH]);
+ if (ret < 0) {
+ dev_err(&client->dev, "error reading payload: %d\n", ret);
+ goto unlock;
+ }
+
+ dev_dbg(&client->dev, "read %d bytes for response command 0x%x\n",
+ buf[PAYLOAD_LENGTH], buf[PAYLOAD_BODY]);
+
+unlock:
+ mutex_unlock(&ts->access_mutex);
+ return ret;
+}
+
+static void zforce_complete(struct zforce_ts *ts, int cmd, int result)
+{
+ struct i2c_client *client = ts->client;
+
+ if (ts->command_waiting == cmd) {
+ dev_dbg(&client->dev, "completing command 0x%x\n", cmd);
+ ts->command_result = result;
+ complete(&ts->command_done);
+ } else {
+ dev_dbg(&client->dev, "command %d not for us\n", cmd);
+ }
+}
+
+static irqreturn_t zforce_interrupt(int irq, void *dev_id)
+{
+ struct zforce_ts *ts = dev_id;
+ struct i2c_client *client = ts->client;
+ const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
+ int ret;
+ u8 payload_buffer[512];
+ u8 *payload;
+
+ /*
+ * When suspended, emit a wakeup signal if necessary and return.
+ * Due to the level-interrupt we will get re-triggered later.
+ */
+ if (ts->suspended) {
+ if (device_may_wakeup(&client->dev))
+ pm_wakeup_event(&client->dev, 500);
+ msleep(20);
+ return IRQ_HANDLED;
+ }
+
+ dev_dbg(&client->dev, "handling interrupt\n");
+
+ /* Don't emit wakeup events from commands run by zforce_suspend */
+ if (!ts->suspending && device_may_wakeup(&client->dev))
+ pm_stay_awake(&client->dev);
+
+ while (!gpio_get_value(pdata->gpio_int)) {
+ ret = zforce_read_packet(ts, payload_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "could not read packet, ret: %d\n",
+ ret);
+ break;
+ }
+
+ payload = &payload_buffer[PAYLOAD_BODY];
+
+ switch (payload[RESPONSE_ID]) {
+ case NOTIFICATION_TOUCH:
+ /*
+ * Always report touch-events received while
+ * suspending, when being a wakeup source
+ */
+ if (ts->suspending && device_may_wakeup(&client->dev))
+ pm_wakeup_event(&client->dev, 500);
+ zforce_touch_event(ts, &payload[RESPONSE_DATA]);
+ break;
+
+ case NOTIFICATION_BOOTCOMPLETE:
+ ts->boot_complete = payload[RESPONSE_DATA];
+ zforce_complete(ts, payload[RESPONSE_ID], 0);
+ break;
+
+ case RESPONSE_INITIALIZE:
+ case RESPONSE_DEACTIVATE:
+ case RESPONSE_SETCONFIG:
+ case RESPONSE_RESOLUTION:
+ case RESPONSE_SCANFREQ:
+ zforce_complete(ts, payload[RESPONSE_ID],
+ payload[RESPONSE_DATA]);
+ break;
+
+ case RESPONSE_STATUS:
+ /*
+ * Version Payload Results
+ * [2:major] [2:minor] [2:build] [2:rev]
+ */
+ ts->version_major = (payload[RESPONSE_DATA + 1] << 8) |
+ payload[RESPONSE_DATA];
+ ts->version_minor = (payload[RESPONSE_DATA + 3] << 8) |
+ payload[RESPONSE_DATA + 2];
+ ts->version_build = (payload[RESPONSE_DATA + 5] << 8) |
+ payload[RESPONSE_DATA + 4];
+ ts->version_rev = (payload[RESPONSE_DATA + 7] << 8) |
+ payload[RESPONSE_DATA + 6];
+ dev_dbg(&ts->client->dev, "Firmware Version %04x:%04x %04x:%04x\n",
+ ts->version_major, ts->version_minor,
+ ts->version_build, ts->version_rev);
+
+ zforce_complete(ts, payload[RESPONSE_ID], 0);
+ break;
+
+ case NOTIFICATION_INVALID_COMMAND:
+ dev_err(&ts->client->dev, "invalid command: 0x%x\n",
+ payload[RESPONSE_DATA]);
+ break;
+
+ default:
+ dev_err(&ts->client->dev, "unrecognized response id: 0x%x\n",
+ payload[RESPONSE_ID]);
+ break;
+ }
+ }
+
+ if (!ts->suspending && device_may_wakeup(&client->dev))
+ pm_relax(&client->dev);
+
+ dev_dbg(&client->dev, "finished interrupt\n");
+
+ return IRQ_HANDLED;
+}
+
+static int zforce_input_open(struct input_dev *dev)
+{
+ struct zforce_ts *ts = input_get_drvdata(dev);
+ int ret;
+
+ ret = zforce_start(ts);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void zforce_input_close(struct input_dev *dev)
+{
+ struct zforce_ts *ts = input_get_drvdata(dev);
+ struct i2c_client *client = ts->client;
+ int ret;
+
+ ret = zforce_stop(ts);
+ if (ret)
+ dev_warn(&client->dev, "stopping zforce failed\n");
+
+ return;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int zforce_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct zforce_ts *ts = i2c_get_clientdata(client);
+ struct input_dev *input = ts->input;
+ int ret = 0;
+
+ mutex_lock(&input->mutex);
+ ts->suspending = true;
+
+ /*
+ * When configured as a wakeup source device should always wake
+ * the system, therefore start device if necessary.
+ */
+ if (device_may_wakeup(&client->dev)) {
+ dev_dbg(&client->dev, "suspend while being a wakeup source\n");
+
+ /* Need to start device, if not open, to be a wakeup source. */
+ if (!input->users) {
+ ret = zforce_start(ts);
+ if (ret)
+ goto unlock;
+ }
+
+ enable_irq_wake(client->irq);
+ } else if (input->users) {
+ dev_dbg(&client->dev, "suspend without being a wakeup source\n");
+
+ ret = zforce_stop(ts);
+ if (ret)
+ goto unlock;
+
+ disable_irq(client->irq);
+ }
+
+ ts->suspended = true;
+
+unlock:
+ ts->suspending = false;
+ mutex_unlock(&input->mutex);
+
+ return ret;
+}
+
+static int zforce_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct zforce_ts *ts = i2c_get_clientdata(client);
+ struct input_dev *input = ts->input;
+ int ret = 0;
+
+ mutex_lock(&input->mutex);
+
+ ts->suspended = false;
+
+ if (device_may_wakeup(&client->dev)) {
+ dev_dbg(&client->dev, "resume from being a wakeup source\n");
+
+ disable_irq_wake(client->irq);
+
+ /* need to stop device if it was not open on suspend */
+ if (!input->users) {
+ ret = zforce_stop(ts);
+ if (ret)
+ goto unlock;
+ }
+ } else if (input->users) {
+ dev_dbg(&client->dev, "resume without being a wakeup source\n");
+
+ enable_irq(client->irq);
+
+ ret = zforce_start(ts);
+ if (ret < 0)
+ goto unlock;
+ }
+
+unlock:
+ mutex_unlock(&input->mutex);
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(zforce_pm_ops, zforce_suspend, zforce_resume);
+
+static void zforce_reset(void *data)
+{
+ struct zforce_ts *ts = data;
+
+ gpio_set_value(ts->pdata->gpio_rst, 0);
+}
+
+static int zforce_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
+ struct zforce_ts *ts;
+ struct input_dev *input_dev;
+ int ret;
+
+ if (!pdata)
+ return -EINVAL;
+
+ ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ret = devm_gpio_request_one(&client->dev, pdata->gpio_int, GPIOF_IN,
+ "zforce_ts_int");
+ if (ret) {
+ dev_err(&client->dev, "request of gpio %d failed, %d\n",
+ pdata->gpio_int, ret);
+ return ret;
+ }
+
+ ret = devm_gpio_request_one(&client->dev, pdata->gpio_rst,
+ GPIOF_OUT_INIT_LOW, "zforce_ts_rst");
+ if (ret) {
+ dev_err(&client->dev, "request of gpio %d failed, %d\n",
+ pdata->gpio_rst, ret);
+ return ret;
+ }
+
+ ret = devm_add_action(&client->dev, zforce_reset, ts);
+ if (ret) {
+ dev_err(&client->dev, "failed to register reset action, %d\n",
+ ret);
+ return ret;
+ }
+
+ snprintf(ts->phys, sizeof(ts->phys),
+ "%s/input0", dev_name(&client->dev));
+
+ input_dev = devm_input_allocate_device(&client->dev);
+ if (!input_dev) {
+ dev_err(&client->dev, "could not allocate input device\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&ts->access_mutex);
+ mutex_init(&ts->command_mutex);
+
+ ts->pdata = pdata;
+ ts->client = client;
+ ts->input = input_dev;
+
+ input_dev->name = "Neonode zForce touchscreen";
+ input_dev->phys = ts->phys;
+ input_dev->id.bustype = BUS_I2C;
+
+ input_dev->open = zforce_input_open;
+ input_dev->close = zforce_input_close;
+
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(EV_SYN, input_dev->evbit);
+ __set_bit(EV_ABS, input_dev->evbit);
+
+ /* For multi touch */
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+ pdata->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+ pdata->y_max, 0, 0);
+
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
+ ZFORCE_MAX_AREA, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
+ ZFORCE_MAX_AREA, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+ input_mt_init_slots(input_dev, ZFORCE_REPORT_POINTS, INPUT_MT_DIRECT);
+
+ input_set_drvdata(ts->input, ts);
+
+ init_completion(&ts->command_done);
+
+ /*
+ * The zforce pulls the interrupt low when it has data ready.
+ * After it is triggered the isr thread runs until all the available
+ * packets have been read and the interrupt is high again.
+ * Therefore we can trigger the interrupt anytime it is low and do
+ * not need to limit it to the interrupt edge.
+ */
+ ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ zforce_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ input_dev->name, ts);
+ if (ret) {
+ dev_err(&client->dev, "irq %d request failed\n", client->irq);
+ return ret;
+ }
+
+ i2c_set_clientdata(client, ts);
+
+ /* let the controller boot */
+ gpio_set_value(pdata->gpio_rst, 1);
+
+ ts->command_waiting = NOTIFICATION_BOOTCOMPLETE;
+ if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0)
+ dev_warn(&client->dev, "bootcomplete timed out\n");
+
+ /* need to start device to get version information */
+ ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
+ if (ret) {
+ dev_err(&client->dev, "unable to initialize, %d\n", ret);
+ return ret;
+ }
+
+ /* this gets the firmware version among other informations */
+ ret = zforce_command_wait(ts, COMMAND_STATUS);
+ if (ret < 0) {
+ dev_err(&client->dev, "couldn't get status, %d\n", ret);
+ zforce_stop(ts);
+ return ret;
+ }
+
+ /* stop device and put it into sleep until it is opened */
+ ret = zforce_stop(ts);
+ if (ret < 0)
+ return ret;
+
+ device_set_wakeup_capable(&client->dev, true);
+
+ ret = input_register_device(input_dev);
+ if (ret) {
+ dev_err(&client->dev, "could not register input device, %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct i2c_device_id zforce_idtable[] = {
+ { "zforce-ts", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, zforce_idtable);
+
+static struct i2c_driver zforce_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "zforce-ts",
+ .pm = &zforce_pm_ops,
+ },
+ .probe = zforce_probe,
+ .id_table = zforce_idtable,
+};
+
+module_i2c_driver(zforce_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("zForce TouchScreen Driver");
+MODULE_LICENSE("GPL");
generated by cgit v0.10.2 at 2024-07-20 05:05:13 (GMT)