diff options
Diffstat (limited to 'drivers/mmc/core')
| -rw-r--r-- | drivers/mmc/core/bus.c | 9 | ||||
| -rw-r--r-- | drivers/mmc/core/core.c | 441 | ||||
| -rw-r--r-- | drivers/mmc/core/core.h | 2 | ||||
| -rw-r--r-- | drivers/mmc/core/host.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc.c | 75 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 331 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.h | 17 | ||||
| -rw-r--r-- | drivers/mmc/core/sd_ops.c | 48 | ||||
| -rw-r--r-- | drivers/mmc/core/sd_ops.h | 1 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio.c | 210 |
10 files changed, 956 insertions, 182 deletions
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 49d9dca..7cd9749 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -37,6 +37,8 @@ static ssize_t mmc_type_show(struct device *dev, return sprintf(buf, "SD\n"); case MMC_TYPE_SDIO: return sprintf(buf, "SDIO\n"); + case MMC_TYPE_SD_COMBO: + return sprintf(buf, "SDcombo\n"); default: return -EFAULT; } @@ -74,6 +76,9 @@ mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env) case MMC_TYPE_SDIO: type = "SDIO"; break; + case MMC_TYPE_SD_COMBO: + type = "SDcombo"; + break; default: type = NULL; } @@ -239,6 +244,10 @@ int mmc_add_card(struct mmc_card *card) case MMC_TYPE_SDIO: type = "SDIO"; break; + case MMC_TYPE_SD_COMBO: + type = "SD-combo"; + if (mmc_card_blockaddr(card)) + type = "SDHC-combo"; default: type = "?"; break; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 569e94d..5db49b1 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1050,6 +1050,352 @@ void mmc_detect_change(struct mmc_host *host, unsigned long delay) EXPORT_SYMBOL(mmc_detect_change); +void mmc_init_erase(struct mmc_card *card) +{ + unsigned int sz; + + if (is_power_of_2(card->erase_size)) + card->erase_shift = ffs(card->erase_size) - 1; + else + card->erase_shift = 0; + + /* + * It is possible to erase an arbitrarily large area of an SD or MMC + * card. That is not desirable because it can take a long time + * (minutes) potentially delaying more important I/O, and also the + * timeout calculations become increasingly hugely over-estimated. + * Consequently, 'pref_erase' is defined as a guide to limit erases + * to that size and alignment. + * + * For SD cards that define Allocation Unit size, limit erases to one + * Allocation Unit at a time. For MMC cards that define High Capacity + * Erase Size, whether it is switched on or not, limit to that size. + * Otherwise just have a stab at a good value. For modern cards it + * will end up being 4MiB. Note that if the value is too small, it + * can end up taking longer to erase. + */ + if (mmc_card_sd(card) && card->ssr.au) { + card->pref_erase = card->ssr.au; + card->erase_shift = ffs(card->ssr.au) - 1; + } else if (card->ext_csd.hc_erase_size) { + card->pref_erase = card->ext_csd.hc_erase_size; + } else { + sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11; + if (sz < 128) + card->pref_erase = 512 * 1024 / 512; + else if (sz < 512) + card->pref_erase = 1024 * 1024 / 512; + else if (sz < 1024) + card->pref_erase = 2 * 1024 * 1024 / 512; + else + card->pref_erase = 4 * 1024 * 1024 / 512; + if (card->pref_erase < card->erase_size) + card->pref_erase = card->erase_size; + else { + sz = card->pref_erase % card->erase_size; + if (sz) + card->pref_erase += card->erase_size - sz; + } + } +} + +static void mmc_set_mmc_erase_timeout(struct mmc_card *card, + struct mmc_command *cmd, + unsigned int arg, unsigned int qty) +{ + unsigned int erase_timeout; + + if (card->ext_csd.erase_group_def & 1) { + /* High Capacity Erase Group Size uses HC timeouts */ + if (arg == MMC_TRIM_ARG) + erase_timeout = card->ext_csd.trim_timeout; + else + erase_timeout = card->ext_csd.hc_erase_timeout; + } else { + /* CSD Erase Group Size uses write timeout */ + unsigned int mult = (10 << card->csd.r2w_factor); + unsigned int timeout_clks = card->csd.tacc_clks * mult; + unsigned int timeout_us; + + /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */ + if (card->csd.tacc_ns < 1000000) + timeout_us = (card->csd.tacc_ns * mult) / 1000; + else + timeout_us = (card->csd.tacc_ns / 1000) * mult; + + /* + * ios.clock is only a target. The real clock rate might be + * less but not that much less, so fudge it by multiplying by 2. + */ + timeout_clks <<= 1; + timeout_us += (timeout_clks * 1000) / + (card->host->ios.clock / 1000); + + erase_timeout = timeout_us / 1000; + + /* + * Theoretically, the calculation could underflow so round up + * to 1ms in that case. + */ + if (!erase_timeout) + erase_timeout = 1; + } + + /* Multiplier for secure operations */ + if (arg & MMC_SECURE_ARGS) { + if (arg == MMC_SECURE_ERASE_ARG) + erase_timeout *= card->ext_csd.sec_erase_mult; + else + erase_timeout *= card->ext_csd.sec_trim_mult; + } + + erase_timeout *= qty; + + /* + * Ensure at least a 1 second timeout for SPI as per + * 'mmc_set_data_timeout()' + */ + if (mmc_host_is_spi(card->host) && erase_timeout < 1000) + erase_timeout = 1000; + + cmd->erase_timeout = erase_timeout; +} + +static void mmc_set_sd_erase_timeout(struct mmc_card *card, + struct mmc_command *cmd, unsigned int arg, + unsigned int qty) +{ + if (card->ssr.erase_timeout) { + /* Erase timeout specified in SD Status Register (SSR) */ + cmd->erase_timeout = card->ssr.erase_timeout * qty + + card->ssr.erase_offset; + } else { + /* + * Erase timeout not specified in SD Status Register (SSR) so + * use 250ms per write block. + */ + cmd->erase_timeout = 250 * qty; + } + + /* Must not be less than 1 second */ + if (cmd->erase_timeout < 1000) + cmd->erase_timeout = 1000; +} + +static void mmc_set_erase_timeout(struct mmc_card *card, + struct mmc_command *cmd, unsigned int arg, + unsigned int qty) +{ + if (mmc_card_sd(card)) + mmc_set_sd_erase_timeout(card, cmd, arg, qty); + else + mmc_set_mmc_erase_timeout(card, cmd, arg, qty); +} + +static int mmc_do_erase(struct mmc_card *card, unsigned int from, + unsigned int to, unsigned int arg) +{ + struct mmc_command cmd; + unsigned int qty = 0; + int err; + + /* + * qty is used to calculate the erase timeout which depends on how many + * erase groups (or allocation units in SD terminology) are affected. + * We count erasing part of an erase group as one erase group. + * For SD, the allocation units are always a power of 2. For MMC, the + * erase group size is almost certainly also power of 2, but it does not + * seem to insist on that in the JEDEC standard, so we fall back to + * division in that case. SD may not specify an allocation unit size, + * in which case the timeout is based on the number of write blocks. + * + * Note that the timeout for secure trim 2 will only be correct if the + * number of erase groups specified is the same as the total of all + * preceding secure trim 1 commands. Since the power may have been + * lost since the secure trim 1 commands occurred, it is generally + * impossible to calculate the secure trim 2 timeout correctly. + */ + if (card->erase_shift) + qty += ((to >> card->erase_shift) - + (from >> card->erase_shift)) + 1; + else if (mmc_card_sd(card)) + qty += to - from + 1; + else + qty += ((to / card->erase_size) - + (from / card->erase_size)) + 1; + + if (!mmc_card_blockaddr(card)) { + from <<= 9; + to <<= 9; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + if (mmc_card_sd(card)) + cmd.opcode = SD_ERASE_WR_BLK_START; + else + cmd.opcode = MMC_ERASE_GROUP_START; + cmd.arg = from; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + printk(KERN_ERR "mmc_erase: group start error %d, " + "status %#x\n", err, cmd.resp[0]); + err = -EINVAL; + goto out; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + if (mmc_card_sd(card)) + cmd.opcode = SD_ERASE_WR_BLK_END; + else + cmd.opcode = MMC_ERASE_GROUP_END; + cmd.arg = to; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + printk(KERN_ERR "mmc_erase: group end error %d, status %#x\n", + err, cmd.resp[0]); + err = -EINVAL; + goto out; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + cmd.opcode = MMC_ERASE; + cmd.arg = arg; + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + mmc_set_erase_timeout(card, &cmd, arg, qty); + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n", + err, cmd.resp[0]); + err = -EIO; + goto out; + } + + if (mmc_host_is_spi(card->host)) + goto out; + + do { + memset(&cmd, 0, sizeof(struct mmc_command)); + cmd.opcode = MMC_SEND_STATUS; + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + /* Do not retry else we can't see errors */ + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err || (cmd.resp[0] & 0xFDF92000)) { + printk(KERN_ERR "error %d requesting status %#x\n", + err, cmd.resp[0]); + err = -EIO; + goto out; + } + } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || + R1_CURRENT_STATE(cmd.resp[0]) == 7); +out: + return err; +} + +/** + * mmc_erase - erase sectors. + * @card: card to erase + * @from: first sector to erase + * @nr: number of sectors to erase + * @arg: erase command argument (SD supports only %MMC_ERASE_ARG) + * + * Caller must claim host before calling this function. + */ +int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr, + unsigned int arg) +{ + unsigned int rem, to = from + nr; + + if (!(card->host->caps & MMC_CAP_ERASE) || + !(card->csd.cmdclass & CCC_ERASE)) + return -EOPNOTSUPP; + + if (!card->erase_size) + return -EOPNOTSUPP; + + if (mmc_card_sd(card) && arg != MMC_ERASE_ARG) + return -EOPNOTSUPP; + + if ((arg & MMC_SECURE_ARGS) && + !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)) + return -EOPNOTSUPP; + + if ((arg & MMC_TRIM_ARGS) && + !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)) + return -EOPNOTSUPP; + + if (arg == MMC_SECURE_ERASE_ARG) { + if (from % card->erase_size || nr % card->erase_size) + return -EINVAL; + } + + if (arg == MMC_ERASE_ARG) { + rem = from % card->erase_size; + if (rem) { + rem = card->erase_size - rem; + from += rem; + if (nr > rem) + nr -= rem; + else + return 0; + } + rem = nr % card->erase_size; + if (rem) + nr -= rem; + } + + if (nr == 0) + return 0; + + to = from + nr; + + if (to <= from) + return -EINVAL; + + /* 'from' and 'to' are inclusive */ + to -= 1; + + return mmc_do_erase(card, from, to, arg); +} +EXPORT_SYMBOL(mmc_erase); + +int mmc_can_erase(struct mmc_card *card) +{ + if ((card->host->caps & MMC_CAP_ERASE) && + (card->csd.cmdclass & CCC_ERASE) && card->erase_size) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_erase); + +int mmc_can_trim(struct mmc_card *card) +{ + if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_trim); + +int mmc_can_secure_erase_trim(struct mmc_card *card) +{ + if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_secure_erase_trim); + +int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, + unsigned int nr) +{ + if (!card->erase_size) + return 0; + if (from % card->erase_size || nr % card->erase_size) + return 0; + return 1; +} +EXPORT_SYMBOL(mmc_erase_group_aligned); void mmc_rescan(struct work_struct *work) { @@ -1057,6 +1403,17 @@ void mmc_rescan(struct work_struct *work) container_of(work, struct mmc_host, detect.work); u32 ocr; int err; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + if (host->rescan_disable) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + spin_unlock_irqrestore(&host->lock, flags); + mmc_bus_get(host); @@ -1099,8 +1456,15 @@ void mmc_rescan(struct work_struct *work) */ err = mmc_send_io_op_cond(host, 0, &ocr); if (!err) { - if (mmc_attach_sdio(host, ocr)) - mmc_power_off(host); + if (mmc_attach_sdio(host, ocr)) { + mmc_claim_host(host); + /* try SDMEM (but not MMC) even if SDIO is broken */ + if (mmc_send_app_op_cond(host, 0, &ocr)) + goto out_fail; + + if (mmc_attach_sd(host, ocr)) + mmc_power_off(host); + } goto out; } @@ -1124,6 +1488,7 @@ void mmc_rescan(struct work_struct *work) goto out; } +out_fail: mmc_release_host(host); mmc_power_off(host); @@ -1266,19 +1631,6 @@ int mmc_suspend_host(struct mmc_host *host) if (host->bus_ops && !host->bus_dead) { if (host->bus_ops->suspend) err = host->bus_ops->suspend(host); - if (err == -ENOSYS || !host->bus_ops->resume) { - /* - * We simply "remove" the card in this case. - * It will be redetected on resume. - */ - if (host->bus_ops->remove) - host->bus_ops->remove(host); - mmc_claim_host(host); - mmc_detach_bus(host); - mmc_release_host(host); - host->pm_flags = 0; - err = 0; - } } mmc_bus_put(host); @@ -1310,28 +1662,61 @@ int mmc_resume_host(struct mmc_host *host) printk(KERN_WARNING "%s: error %d during resume " "(card was removed?)\n", mmc_hostname(host), err); - if (host->bus_ops->remove) - host->bus_ops->remove(host); - mmc_claim_host(host); - mmc_detach_bus(host); - mmc_release_host(host); - /* no need to bother upper layers */ err = 0; } } mmc_bus_put(host); - /* - * We add a slight delay here so that resume can progress - * in parallel. - */ - mmc_detect_change(host, 1); - return err; } - EXPORT_SYMBOL(mmc_resume_host); +/* Do the card removal on suspend if card is assumed removeable + * Do that in pm notifier while userspace isn't yet frozen, so we will be able + to sync the card. +*/ +int mmc_pm_notify(struct notifier_block *notify_block, + unsigned long mode, void *unused) +{ + struct mmc_host *host = container_of( + notify_block, struct mmc_host, pm_notify); + unsigned long flags; + + + switch (mode) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + + spin_lock_irqsave(&host->lock, flags); + host->rescan_disable = 1; + spin_unlock_irqrestore(&host->lock, flags); + cancel_delayed_work_sync(&host->detect); + + if (!host->bus_ops || host->bus_ops->suspend) + break; + + mmc_claim_host(host); + + if (host->bus_ops->remove) + host->bus_ops->remove(host); + + mmc_detach_bus(host); + mmc_release_host(host); + host->pm_flags = 0; + break; + + case PM_POST_SUSPEND: + case PM_POST_HIBERNATION: + + spin_lock_irqsave(&host->lock, flags); + host->rescan_disable = 0; + spin_unlock_irqrestore(&host->lock, flags); + mmc_detect_change(host, 0); + + } + + return 0; +} #endif static int __init mmc_init(void) diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index a811c52..9d9eef5 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -29,6 +29,8 @@ struct mmc_bus_ops { void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops); void mmc_detach_bus(struct mmc_host *host); +void mmc_init_erase(struct mmc_card *card); + void mmc_set_chip_select(struct mmc_host *host, int mode); void mmc_set_clock(struct mmc_host *host, unsigned int hz); void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 4735390..0efe631 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -17,6 +17,7 @@ #include <linux/pagemap.h> #include <linux/leds.h> #include <linux/slab.h> +#include <linux/suspend.h> #include <linux/mmc/host.h> @@ -85,6 +86,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable); + host->pm_notify.notifier_call = mmc_pm_notify; /* * By default, hosts do not support SGIO or large requests. @@ -133,6 +135,7 @@ int mmc_add_host(struct mmc_host *host) #endif mmc_start_host(host); + register_pm_notifier(&host->pm_notify); return 0; } @@ -149,6 +152,7 @@ EXPORT_SYMBOL(mmc_add_host); */ void mmc_remove_host(struct mmc_host *host) { + unregister_pm_notifier(&host->pm_notify); mmc_stop_host(host); #ifdef CONFIG_DEBUG_FS diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 89f7a25..6909a54 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -108,23 +108,34 @@ static int mmc_decode_cid(struct mmc_card *card) return 0; } +static void mmc_set_erase_size(struct mmc_card *card) +{ + if (card->ext_csd.erase_group_def & 1) + card->erase_size = card->ext_csd.hc_erase_size; + else + card->erase_size = card->csd.erase_size; + + mmc_init_erase(card); +} + /* * Given a 128-bit response, decode to our card CSD structure. */ static int mmc_decode_csd(struct mmc_card *card) { struct mmc_csd *csd = &card->csd; - unsigned int e, m, csd_struct; + unsigned int e, m, a, b; u32 *resp = card->raw_csd; /* * We only understand CSD structure v1.1 and v1.2. * v1.2 has extra information in bits 15, 11 and 10. + * We also support eMMC v4.4 & v4.41. */ - csd_struct = UNSTUFF_BITS(resp, 126, 2); - if (csd_struct != 1 && csd_struct != 2) { + csd->structure = UNSTUFF_BITS(resp, 126, 2); + if (csd->structure == 0) { printk(KERN_ERR "%s: unrecognised CSD structure version %d\n", - mmc_hostname(card->host), csd_struct); + mmc_hostname(card->host), csd->structure); return -EINVAL; } @@ -151,6 +162,13 @@ static int mmc_decode_csd(struct mmc_card *card) csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); csd->write_partial = UNSTUFF_BITS(resp, 21, 1); + if (csd->write_blkbits >= 9) { + a = UNSTUFF_BITS(resp, 42, 5); + b = UNSTUFF_BITS(resp, 37, 5); + csd->erase_size = (a + 1) * (b + 1); + csd->erase_size <<= csd->write_blkbits - 9; + } + return 0; } @@ -207,11 +225,22 @@ static int mmc_read_ext_csd(struct mmc_card *card) goto out; } + /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */ + if (card->csd.structure == 3) { + int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE]; + if (ext_csd_struct > 2) { + printk(KERN_ERR "%s: unrecognised EXT_CSD structure " + "version %d\n", mmc_hostname(card->host), + ext_csd_struct); + err = -EINVAL; + goto out; + } + } + card->ext_csd.rev = ext_csd[EXT_CSD_REV]; if (card->ext_csd.rev > 5) { - printk(KERN_ERR "%s: unrecognised EXT_CSD structure " - "version %d\n", mmc_hostname(card->host), - card->ext_csd.rev); + printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n", + mmc_hostname(card->host), card->ext_csd.rev); err = -EINVAL; goto out; } @@ -222,7 +251,9 @@ static int mmc_read_ext_csd(struct mmc_card *card) ext_csd[EXT_CSD_SEC_CNT + 1] << 8 | ext_csd[EXT_CSD_SEC_CNT + 2] << 16 | ext_csd[EXT_CSD_SEC_CNT + 3] << 24; - if (card->ext_csd.sectors) + + /* Cards with density > 2GiB are sector addressed */ + if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512) mmc_card_set_blockaddr(card); } @@ -247,8 +278,30 @@ static int mmc_read_ext_csd(struct mmc_card *card) if (sa_shift > 0 && sa_shift <= 0x17) card->ext_csd.sa_timeout = 1 << ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.erase_group_def = + ext_csd[EXT_CSD_ERASE_GROUP_DEF]; + card->ext_csd.hc_erase_timeout = 300 * + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.hc_erase_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] << 10; } + if (card->ext_csd.rev >= 4) { + card->ext_csd.sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.trim_timeout = 300 * + ext_csd[EXT_CSD_TRIM_MULT]; + } + + if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) + card->erased_byte = 0xFF; + else + card->erased_byte = 0x0; + out: kfree(ext_csd); @@ -260,6 +313,8 @@ MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1], MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], card->raw_csd[2], card->raw_csd[3]); MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year); +MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9); +MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9); MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev); MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); @@ -271,6 +326,8 @@ static struct attribute *mmc_std_attrs[] = { &dev_attr_cid.attr, &dev_attr_csd.attr, &dev_attr_date.attr, + &dev_attr_erase_size.attr, + &dev_attr_preferred_erase_size.attr, &dev_attr_fwrev.attr, &dev_attr_hwrev.attr, &dev_attr_manfid.attr, @@ -407,6 +464,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_read_ext_csd(card); if (err) goto free_card; + /* Erase size depends on CSD and Extended CSD */ + mmc_set_erase_size(card); } /* diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 5eac21d..0f52410 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -59,7 +59,7 @@ static const unsigned int tacc_mant[] = { /* * Given the decoded CSD structure, decode the raw CID to our CID structure. */ -static void mmc_decode_cid(struct mmc_card *card) +void mmc_decode_cid(struct mmc_card *card) { u32 *resp = card->raw_cid; @@ -119,6 +119,13 @@ static int mmc_decode_csd(struct mmc_card *card) csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); csd->write_partial = UNSTUFF_BITS(resp, 21, 1); + + if (UNSTUFF_BITS(resp, 46, 1)) { + csd->erase_size = 1; + } else if (csd->write_blkbits >= 9) { + csd->erase_size = UNSTUFF_BITS(resp, 39, 7) + 1; + csd->erase_size <<= csd->write_blkbits - 9; + } break; case 1: /* @@ -147,6 +154,7 @@ static int mmc_decode_csd(struct mmc_card *card) csd->r2w_factor = 4; /* Unused */ csd->write_blkbits = 9; csd->write_partial = 0; + csd->erase_size = 1; break; default: printk(KERN_ERR "%s: unrecognised CSD structure version %d\n", @@ -154,6 +162,8 @@ static int mmc_decode_csd(struct mmc_card *card) return -EINVAL; } + card->erase_size = csd->erase_size; + return 0; } @@ -179,10 +189,68 @@ static int mmc_decode_scr(struct mmc_card *card) scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4); scr->bus_widths = UNSTUFF_BITS(resp, 48, 4); + if (UNSTUFF_BITS(resp, 55, 1)) + card->erased_byte = 0xFF; + else + card->erased_byte = 0x0; + return 0; } /* + * Fetch and process SD Status register. + */ +static int mmc_read_ssr(struct mmc_card *card) +{ + unsigned int au, es, et, eo; + int err, i; + u32 *ssr; + + if (!(card->csd.cmdclass & CCC_APP_SPEC)) { + printk(KERN_WARNING "%s: card lacks mandatory SD Status " + "function.\n", mmc_hostname(card->host)); + return 0; + } + + ssr = kmalloc(64, GFP_KERNEL); + if (!ssr) + return -ENOMEM; + + err = mmc_app_sd_status(card, ssr); + if (err) { + printk(KERN_WARNING "%s: problem reading SD Status " + "register.\n", mmc_hostname(card->host)); + err = 0; + goto out; + } + + for (i = 0; i < 16; i++) + ssr[i] = be32_to_cpu(ssr[i]); + + /* + * UNSTUFF_BITS only works with four u32s so we have to offset the + * bitfield positions accordingly. + */ + au = UNSTUFF_BITS(ssr, 428 - 384, 4); + if (au > 0 || au <= 9) { + card->ssr.au = 1 << (au + 4); + es = UNSTUFF_BITS(ssr, 408 - 384, 16); + et = UNSTUFF_BITS(ssr, 402 - 384, 6); + eo = UNSTUFF_BITS(ssr, 400 - 384, 2); + if (es && et) { + card->ssr.erase_timeout = (et * 1000) / es; + card->ssr.erase_offset = eo * 1000; + } + } else { + printk(KERN_WARNING "%s: SD Status: Invalid Allocation Unit " + "size.\n", mmc_hostname(card->host)); + } +out: + kfree(ssr); + return err; +} + +/* * Fetches and decodes switch information */ static int mmc_read_switch(struct mmc_card *card) @@ -238,7 +306,7 @@ out: /* * Test if the card supports high-speed mode and, if so, switch to it. */ -static int mmc_switch_hs(struct mmc_card *card) +int mmc_sd_switch_hs(struct mmc_card *card) { int err; u8 *status; @@ -272,9 +340,9 @@ static int mmc_switch_hs(struct mmc_card *card) printk(KERN_WARNING "%s: Problem switching card " "into high-speed mode!\n", mmc_hostname(card->host)); + err = 0; } else { - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_SD_HS); + err = 1; } out: @@ -289,6 +357,8 @@ MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], card->raw_csd[2], card->raw_csd[3]); MMC_DEV_ATTR(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]); MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year); +MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9); +MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9); MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev); MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); @@ -302,6 +372,8 @@ static struct attribute *sd_std_attrs[] = { &dev_attr_csd.attr, &dev_attr_scr.attr, &dev_attr_date.attr, + &dev_attr_erase_size.attr, + &dev_attr_preferred_erase_size.attr, &dev_attr_fwrev.attr, &dev_attr_hwrev.attr, &dev_attr_manfid.attr, @@ -320,26 +392,16 @@ static const struct attribute_group *sd_attr_groups[] = { NULL, }; -static struct device_type sd_type = { +struct device_type sd_type = { .groups = sd_attr_groups, }; /* - * Handle the detection and initialisation of a card. - * - * In the case of a resume, "oldcard" will contain the card - * we're trying to reinitialise. + * Fetch CID from card. */ -static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, - struct mmc_card *oldcard) +int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid) { - struct mmc_card *card; int err; - u32 cid[4]; - unsigned int max_dtr; - - BUG_ON(!host); - WARN_ON(!host->claimed); /* * Since we're changing the OCR value, we seem to @@ -361,92 +423,67 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, err = mmc_send_app_op_cond(host, ocr, NULL); if (err) - goto err; + return err; - /* - * Fetch CID from card. - */ if (mmc_host_is_spi(host)) err = mmc_send_cid(host, cid); else err = mmc_all_send_cid(host, cid); - if (err) - goto err; - if (oldcard) { - if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) { - err = -ENOENT; - goto err; - } - - card = oldcard; - } else { - /* - * Allocate card structure. - */ - card = mmc_alloc_card(host, &sd_type); - if (IS_ERR(card)) { - err = PTR_ERR(card); - goto err; - } + return err; +} - card->type = MMC_TYPE_SD; - memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); - } +int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card) +{ + int err; /* - * For native busses: get card RCA and quit open drain mode. + * Fetch CSD from card. */ - if (!mmc_host_is_spi(host)) { - err = mmc_send_relative_addr(host, &card->rca); - if (err) - goto free_card; + err = mmc_send_csd(card, card->raw_csd); + if (err) + return err; - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); - } + err = mmc_decode_csd(card); + if (err) + return err; - if (!oldcard) { + return 0; +} + +int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, + bool reinit) +{ + int err; + + if (!reinit) { /* - * Fetch CSD from card. + * Fetch SCR from card. */ - err = mmc_send_csd(card, card->raw_csd); - if (err) - goto free_card; - - err = mmc_decode_csd(card); + err = mmc_app_send_scr(card, card->raw_scr); if (err) - goto free_card; - - mmc_decode_cid(card); - } + return err; - /* - * Select card, as all following commands rely on that. - */ - if (!mmc_host_is_spi(host)) { - err = mmc_select_card(card); + err = mmc_decode_scr(card); if (err) - goto free_card; - } + return err; - if (!oldcard) { /* - * Fetch SCR from card. + * Fetch and process SD Status register. */ - err = mmc_app_send_scr(card, card->raw_scr); + err = mmc_read_ssr(card); if (err) - goto free_card; + return err; - err = mmc_decode_scr(card); - if (err < 0) - goto free_card; + /* Erase init depends on CSD and SSR */ + mmc_init_erase(card); /* * Fetch switch information from card. */ err = mmc_read_switch(card); if (err) - goto free_card; + return err; } /* @@ -458,20 +495,34 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, if (mmc_host_is_spi(host)) { err = mmc_spi_set_crc(host, use_spi_crc); if (err) - goto free_card; + return err; } /* - * Attempt to change to high-speed (if supported) + * Check if read-only switch is active. */ - err = mmc_switch_hs(card); - if (err) - goto free_card; + if (!reinit) { + int ro = -1; - /* - * Compute bus speed. - */ - max_dtr = (unsigned int)-1; + if (host->ops->get_ro) + ro = host->ops->get_ro(host); + + if (ro < 0) { + printk(KERN_WARNING "%s: host does not " + "support reading read-only " + "switch. assuming write-enable.\n", + mmc_hostname(host)); + } else if (ro > 0) { + mmc_card_set_readonly(card); + } + } + + return 0; +} + +unsigned mmc_sd_get_max_clock(struct mmc_card *card) +{ + unsigned max_dtr = (unsigned int)-1; if (mmc_card_highspeed(card)) { if (max_dtr > card->sw_caps.hs_max_dtr) @@ -480,7 +531,97 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, max_dtr = card->csd.max_dtr; } - mmc_set_clock(host, max_dtr); + return max_dtr; +} + +void mmc_sd_go_highspeed(struct mmc_card *card) +{ + mmc_card_set_highspeed(card); + mmc_set_timing(card->host, MMC_TIMING_SD_HS); +} + +/* + * Handle the detection and initialisation of a card. + * + * In the case of a resume, "oldcard" will contain the card + * we're trying to reinitialise. + */ +static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, + struct mmc_card *oldcard) +{ + struct mmc_card *card; + int err; + u32 cid[4]; + + BUG_ON(!host); + WARN_ON(!host->claimed); + + err = mmc_sd_get_cid(host, ocr, cid); + if (err) + return err; + + if (oldcard) { + if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) + return -ENOENT; + + card = oldcard; + } else { + /* + * Allocate card structure. + */ + card = mmc_alloc_card(host, &sd_type); + if (IS_ERR(card)) + return PTR_ERR(card); + + card->type = MMC_TYPE_SD; + memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); + } + + /* + * For native busses: get card RCA and quit open drain mode. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_send_relative_addr(host, &card->rca); + if (err) + return err; + + mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + } + + if (!oldcard) { + err = mmc_sd_get_csd(host, card); + if (err) + return err; + + mmc_decode_cid(card); + } + + /* + * Select card, as all following commands rely on that. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + return err; + } + + err = mmc_sd_setup_card(host, card, oldcard != NULL); + if (err) + goto free_card; + + /* + * Attempt to change to high-speed (if supported) + */ + err = mmc_sd_switch_hs(card); + if (err > 0) + mmc_sd_go_highspeed(card); + else if (err) + goto free_card; + + /* + * Set bus speed. + */ + mmc_set_clock(host, mmc_sd_get_max_clock(card)); /* * Switch to wider bus (if supported). @@ -494,30 +635,12 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, mmc_set_bus_width(host, MMC_BUS_WIDTH_4); } - /* - * Check if read-only switch is active. - */ - if (!oldcard) { - if (!host->ops->get_ro || host->ops->get_ro(host) < 0) { - printk(KERN_WARNING "%s: host does not " - "support reading read-only " - "switch. assuming write-enable.\n", - mmc_hostname(host)); - } else { - if (host->ops->get_ro(host) > 0) - mmc_card_set_readonly(card); - } - } - - if (!oldcard) - host->card = card; - + host->card = card; return 0; free_card: if (!oldcard) mmc_remove_card(card); -err: return err; } diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h new file mode 100644 index 0000000..3d8800f --- /dev/null +++ b/drivers/mmc/core/sd.h @@ -0,0 +1,17 @@ +#ifndef _MMC_CORE_SD_H +#define _MMC_CORE_SD_H + +#include <linux/mmc/card.h> + +extern struct device_type sd_type; + +int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid); +int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card); +void mmc_decode_cid(struct mmc_card *card); +int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, + bool reinit); +unsigned mmc_sd_get_max_clock(struct mmc_card *card); +int mmc_sd_switch_hs(struct mmc_card *card); +void mmc_sd_go_highspeed(struct mmc_card *card); + +#endif diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c index 63772e7..797cdb5 100644 --- a/drivers/mmc/core/sd_ops.c +++ b/drivers/mmc/core/sd_ops.c @@ -346,3 +346,51 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group, return 0; } +int mmc_app_sd_status(struct mmc_card *card, void *ssr) +{ + int err; + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_data data; + struct scatterlist sg; + + BUG_ON(!card); + BUG_ON(!card->host); + BUG_ON(!ssr); + + /* NOTE: caller guarantees ssr is heap-allocated */ + + err = mmc_app_cmd(card->host, card); + if (err) + return err; + + memset(&mrq, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = SD_APP_SD_STATUS; + cmd.arg = 0; + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = 64; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, ssr, 64); + + mmc_set_data_timeout(&data, card); + + mmc_wait_for_req(card->host, &mrq); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return 0; +} diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h index 9742d8a..ffc2305 100644 --- a/drivers/mmc/core/sd_ops.h +++ b/drivers/mmc/core/sd_ops.h @@ -19,6 +19,7 @@ int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca); int mmc_app_send_scr(struct mmc_card *card, u32 *scr); int mmc_sd_switch(struct mmc_card *card, int mode, int group, u8 value, u8 *resp); +int mmc_app_sd_status(struct mmc_card *card, void *ssr); #endif diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index b9dee28..bd2755e 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -18,6 +18,7 @@ #include "core.h" #include "bus.h" +#include "sd.h" #include "sdio_bus.h" #include "mmc_ops.h" #include "sd_ops.h" @@ -62,13 +63,19 @@ static int sdio_init_func(struct mmc_card *card, unsigned int fn) func->num = fn; - ret = sdio_read_fbr(func); - if (ret) - goto fail; + if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) { + ret = sdio_read_fbr(func); + if (ret) + goto fail; - ret = sdio_read_func_cis(func); - if (ret) - goto fail; + ret = sdio_read_func_cis(func); + if (ret) + goto fail; + } else { + func->vendor = func->card->cis.vendor; + func->device = func->card->cis.device; + func->max_blksize = func->card->cis.blksize; + } card->sdio_func[fn - 1] = func; @@ -159,9 +166,7 @@ static int sdio_enable_wide(struct mmc_card *card) if (ret) return ret; - mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); - - return 0; + return 1; } /* @@ -221,10 +226,34 @@ static int sdio_disable_wide(struct mmc_card *card) return 0; } + +static int sdio_enable_4bit_bus(struct mmc_card *card) +{ + int err; + + if (card->type == MMC_TYPE_SDIO) + return sdio_enable_wide(card); + + if ((card->host->caps & MMC_CAP_4_BIT_DATA) && + (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + if (err) + return err; + } else + return 0; + + err = sdio_enable_wide(card); + if (err <= 0) + mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1); + + return err; +} + + /* * Test if the card supports high-speed mode and, if so, switch to it. */ -static int sdio_enable_hs(struct mmc_card *card) +static int mmc_sdio_switch_hs(struct mmc_card *card, int enable) { int ret; u8 speed; @@ -239,16 +268,56 @@ static int sdio_enable_hs(struct mmc_card *card) if (ret) return ret; - speed |= SDIO_SPEED_EHS; + if (enable) + speed |= SDIO_SPEED_EHS; + else + speed &= ~SDIO_SPEED_EHS; ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); if (ret) return ret; - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_SD_HS); + return 1; +} - return 0; +/* + * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported. + */ +static int sdio_enable_hs(struct mmc_card *card) +{ + int ret; + + ret = mmc_sdio_switch_hs(card, true); + if (ret <= 0 || card->type == MMC_TYPE_SDIO) + return ret; + + ret = mmc_sd_switch_hs(card); + if (ret <= 0) + mmc_sdio_switch_hs(card, false); + + return ret; +} + +static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) +{ + unsigned max_dtr; + + if (mmc_card_highspeed(card)) { + /* + * The SDIO specification doesn't mention how + * the CIS transfer speed register relates to + * high-speed, but it seems that 50 MHz is + * mandatory. + */ + max_dtr = 50000000; + } else { + max_dtr = card->cis.max_dtr; + } + + if (card->type == MMC_TYPE_SD_COMBO) + max_dtr = min(max_dtr, mmc_sd_get_max_clock(card)); + + return max_dtr; } /* @@ -293,7 +362,24 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, goto err; } - card->type = MMC_TYPE_SDIO; + err = mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid); + + if (!err) { + card->type = MMC_TYPE_SD_COMBO; + + if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO || + memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) { + mmc_remove_card(card); + return -ENOENT; + } + } else { + card->type = MMC_TYPE_SDIO; + + if (oldcard && oldcard->type != MMC_TYPE_SDIO) { + mmc_remove_card(card); + return -ENOENT; + } + } /* * Call the optional HC's init_card function to handle quirks. @@ -313,6 +399,17 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, } /* + * Read CSD, before selecting the card + */ + if (!oldcard && card->type == MMC_TYPE_SD_COMBO) { + err = mmc_sd_get_csd(host, card); + if (err) + return err; + + mmc_decode_cid(card); + } + + /* * Select card, as all following commands rely on that. */ if (!powered_resume && !mmc_host_is_spi(host)) { @@ -321,6 +418,23 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, goto remove; } + if (card->quirks & MMC_QUIRK_NONSTD_SDIO) { + /* + * This is non-standard SDIO device, meaning it doesn't + * have any CIA (Common I/O area) registers present. + * It's host's responsibility to fill cccr and cis + * structures in init_card(). + */ + mmc_set_clock(host, card->cis.max_dtr); + + if (card->cccr.high_speed) { + mmc_card_set_highspeed(card); + mmc_set_timing(card->host, MMC_TIMING_SD_HS); + } + + goto finish; + } + /* * Read the common registers. */ @@ -339,43 +453,57 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, int same = (card->cis.vendor == oldcard->cis.vendor && card->cis.device == oldcard->cis.device); mmc_remove_card(card); - if (!same) { - err = -ENOENT; - goto err; - } + if (!same) + return -ENOENT; + card = oldcard; return 0; } + if (card->type == MMC_TYPE_SD_COMBO) { + err = mmc_sd_setup_card(host, card, oldcard != NULL); + /* handle as SDIO-only card if memory init failed */ + if (err) { + mmc_go_idle(host); + if (mmc_host_is_spi(host)) + /* should not fail, as it worked previously */ + mmc_spi_set_crc(host, use_spi_crc); + card->type = MMC_TYPE_SDIO; + } else + card->dev.type = &sd_type; + } + + /* + * If needed, disconnect card detection pull-up resistor. + */ + err = sdio_disable_cd(card); + if (err) + goto remove; + /* * Switch to high-speed (if supported). */ err = sdio_enable_hs(card); - if (err) + if (err > 0) + mmc_sd_go_highspeed(card); + else if (err) goto remove; /* * Change to the card's maximum speed. */ - if (mmc_card_highspeed(card)) { - /* - * The SDIO specification doesn't mention how - * the CIS transfer speed register relates to - * high-speed, but it seems that 50 MHz is - * mandatory. - */ - mmc_set_clock(host, 50000000); - } else { - mmc_set_clock(host, card->cis.max_dtr); - } + mmc_set_clock(host, mmc_sdio_get_max_clock(card)); /* * Switch to wider bus (if supported). */ - err = sdio_enable_wide(card); - if (err) + err = sdio_enable_4bit_bus(card); + if (err > 0) + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + else if (err) goto remove; +finish: if (!oldcard) host->card = card; return 0; @@ -487,9 +615,14 @@ static int mmc_sdio_resume(struct mmc_host *host) mmc_claim_host(host); err = mmc_sdio_init_card(host, host->ocr, host->card, (host->pm_flags & MMC_PM_KEEP_POWER)); - if (!err) + if (!err) { /* We may have switched to 1-bit mode during suspend. */ - err = sdio_enable_wide(host->card); + err = sdio_enable_4bit_bus(host->card); + if (err > 0) { + mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + err = 0; + } + } if (!err && host->sdio_irqs) mmc_signal_sdio_irq(host); mmc_release_host(host); @@ -574,13 +707,6 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) card->sdio_funcs = 0; /* - * If needed, disconnect card detection pull-up resistor. - */ - err = sdio_disable_cd(card); - if (err) - goto remove; - - /* * Initialize (but don't add) all present functions. */ for (i = 0; i < funcs; i++, card->sdio_funcs++) { |