diff options
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r-- | drivers/mmc/host/atmel-mci.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.c | 6 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.h | 41 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-of-core.c | 7 | ||||
-rw-r--r-- | drivers/mmc/host/sdricoh_cs.c | 2 |
5 files changed, 38 insertions, 20 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index ea3888b..aa8039f 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1899,5 +1899,5 @@ late_initcall(atmci_init); /* try to load after dma driver when built-in */ module_exit(atmci_exit); MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); -MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>"); +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index b4a7e4f..4941e06 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -77,7 +77,7 @@ static struct variant_data variant_arm_extended_fifo = { static struct variant_data variant_u300 = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, - .clkreg_enable = 1 << 13, /* HWFCEN */ + .clkreg_enable = MCI_ST_U300_HWFCEN, .datalength_bits = 16, .sdio = true, }; @@ -86,7 +86,7 @@ static struct variant_data variant_ux500 = { .fifosize = 30 * 4, .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, - .clkreg_enable = 1 << 14, /* HWFCEN */ + .clkreg_enable = MCI_ST_UX500_HWFCEN, .datalength_bits = 24, .sdio = true, .st_clkdiv = true, @@ -103,6 +103,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) if (desired) { if (desired >= host->mclk) { clk = MCI_CLK_BYPASS; + if (variant->st_clkdiv) + clk |= MCI_ST_UX500_NEG_EDGE; host->cclk = host->mclk; } else if (variant->st_clkdiv) { /* diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index ec9a7bc6..bb32e21 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -11,23 +11,33 @@ #define MCI_PWR_OFF 0x00 #define MCI_PWR_UP 0x02 #define MCI_PWR_ON 0x03 -#define MCI_DATA2DIREN (1 << 2) -#define MCI_CMDDIREN (1 << 3) -#define MCI_DATA0DIREN (1 << 4) -#define MCI_DATA31DIREN (1 << 5) #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) -/* The ST Micro version does not have ROD */ -#define MCI_FBCLKEN (1 << 7) -#define MCI_DATA74DIREN (1 << 8) +/* + * The ST Micro version does not have ROD and reuse the voltage registers + * for direction settings + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) #define MCI_4BIT_BUS (1 << 11) -/* 8bit wide buses supported in ST Micro versions */ +/* + * 8bit wide buses, hardware flow contronl, negative edges and clock inversion + * supported in ST Micro U300 and Ux500 versions + */ #define MCI_ST_8BIT_BUS (1 << 12) +#define MCI_ST_U300_HWFCEN (1 << 13) +#define MCI_ST_UX500_NEG_EDGE (1 << 13) +#define MCI_ST_UX500_HWFCEN (1 << 14) +#define MCI_ST_UX500_CLK_INV (1 << 15) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -88,8 +98,9 @@ #define MCI_RXFIFOEMPTY (1 << 19) #define MCI_TXDATAAVLBL (1 << 20) #define MCI_RXDATAAVLBL (1 << 21) -#define MCI_SDIOIT (1 << 22) -#define MCI_CEATAEND (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOIT (1 << 22) +#define MCI_ST_CEATAEND (1 << 23) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -102,8 +113,9 @@ #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) #define MCI_DATABLOCKENDCLR (1 << 10) -#define MCI_SDIOITC (1 << 22) -#define MCI_CEATAENDC (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITC (1 << 22) +#define MCI_ST_CEATAENDC (1 << 23) #define MMCIMASK0 0x03c #define MCI_CMDCRCFAILMASK (1 << 0) @@ -127,8 +139,9 @@ #define MCI_RXFIFOEMPTYMASK (1 << 19) #define MCI_TXDATAAVLBLMASK (1 << 20) #define MCI_RXDATAAVLBLMASK (1 << 21) -#define MCI_SDIOITMASK (1 << 22) -#define MCI_CEATAENDMASK (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITMASK (1 << 22) +#define MCI_ST_CEATAENDMASK (1 << 23) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c index f9b611f..60e4186 100644 --- a/drivers/mmc/host/sdhci-of-core.c +++ b/drivers/mmc/host/sdhci-of-core.c @@ -124,8 +124,10 @@ static bool __devinit sdhci_of_wp_inverted(struct device_node *np) #endif } +static const struct of_device_id sdhci_of_match[]; static int __devinit sdhci_of_probe(struct platform_device *ofdev) { + const struct of_device_id *match; struct device_node *np = ofdev->dev.of_node; struct sdhci_of_data *sdhci_of_data; struct sdhci_host *host; @@ -134,9 +136,10 @@ static int __devinit sdhci_of_probe(struct platform_device *ofdev) int size; int ret; - if (!ofdev->dev.of_match) + match = of_match_device(sdhci_of_match, &ofdev->dev); + if (!match) return -EINVAL; - sdhci_of_data = ofdev->dev.of_match->data; + sdhci_of_data = match->data; if (!of_device_is_available(np)) return -ENODEV; diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index bbc298f..496b7ef 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -76,7 +76,7 @@ static unsigned int switchlocked; #define BUSY_TIMEOUT 32767 /* list of supported pcmcia devices */ -static struct pcmcia_device_id pcmcia_ids[] = { +static const struct pcmcia_device_id pcmcia_ids[] = { /* vendor and device strings followed by their crc32 hashes */ PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed, 0xc3901202), |