diff options
Diffstat (limited to 'drivers/net/ethernet/intel/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/intel/Kconfig | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig new file mode 100644 index 0000000..5fe185b --- /dev/null +++ b/drivers/net/ethernet/intel/Kconfig @@ -0,0 +1,220 @@ +# +# Intel network device configuration +# + +config NET_VENDOR_INTEL + bool "Intel devices" + depends on PCI || PCI_MSI + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Intel cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_INTEL + +config E100 + tristate "Intel(R) PRO/100+ support" + depends on PCI + select MII + ---help--- + This driver supports Intel(R) PRO/100 family of adapters. + To verify that your adapter is supported, find the board ID number + on the adapter. Look for a label that has a barcode and a number + in the format 123456-001 (six digits hyphen three digits). + + Use the above information and the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + to identify the adapter. + + For the latest Intel PRO/100 network driver for Linux, see: + + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> + + More specific information on configuring the driver is in + <file:Documentation/networking/e100.txt>. + + To compile this driver as a module, choose M here. The module + will be called e100. + +config E1000 + tristate "Intel(R) PRO/1000 Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) PRO/1000 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here. The module + will be called e1000. + +config E1000E + tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" + depends on PCI && (!SPARC32 || BROKEN) + select CRC32 + ---help--- + This driver supports the PCI-Express Intel(R) PRO/1000 gigabit + ethernet family of adapters. For PCI or PCI-X e1000 adapters, + use the regular e1000 driver For more information on how to + identify your adapter, go to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + To compile this driver as a module, choose M here. The module + will be called e1000e. + +config IGB + tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82575/82576 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here. The module + will be called igb. + +config IGB_DCA + bool "Direct Cache Access (DCA) Support" + default y + depends on IGB && DCA && !(IGB=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. + +config IGBVF + tristate "Intel(R) 82576 Virtual Function Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82576 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here. The module + will be called igbvf. + +config IXGB + tristate "Intel(R) PRO/10GbE support" + depends on PCI + ---help--- + This driver supports Intel(R) PRO/10GbE family of adapters for + PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver + instead. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/ixgb.txt>. + + To compile this driver as a module, choose M here. The module + will be called ixgb. + +config IXGBE + tristate "Intel(R) 10GbE PCI Express adapters support" + depends on PCI && INET + select MDIO + ---help--- + This driver supports Intel(R) 10GbE PCI Express family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + To compile this driver as a module, choose M here. The module + will be called ixgbe. + +config IXGBE_DCA + bool "Direct Cache Access (DCA) Support" + default y + depends on IXGBE && DCA && !(IXGBE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. + +config IXGBE_DCB + bool "Data Center Bridging (DCB) Support" + default n + depends on IXGBE && DCB + ---help--- + Say Y here if you want to use Data Center Bridging (DCB) in the + driver. + + If unsure, say N. + +config IXGBEVF + tristate "Intel(R) 82599 Virtual Function Ethernet support" + depends on PCI_MSI + ---help--- + This driver supports Intel(R) 82599 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: + + <http://support.intel.com/support/network/sb/CS-008441.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/ixgbevf.txt>. + + To compile this driver as a module, choose M here. The module + will be called ixgbevf. MSI-X interrupt support is required + for this driver to work correctly. + +endif # NET_VENDOR_INTEL |