summaryrefslogtreecommitdiff
path: root/drivers/net/igb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/igb')
-rw-r--r--drivers/net/igb/e1000_82575.c58
-rw-r--r--drivers/net/igb/e1000_defines.h8
-rw-r--r--drivers/net/igb/e1000_hw.h4
-rw-r--r--drivers/net/igb/e1000_mac.c14
-rw-r--r--drivers/net/igb/e1000_regs.h1
-rw-r--r--drivers/net/igb/igb_main.c28
6 files changed, 98 insertions, 15 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 606c25c..c4506bf 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -61,6 +61,7 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
static bool igb_sgmii_active_82575(struct e1000_hw *);
static s32 igb_reset_init_script_82575(struct e1000_hw *);
static s32 igb_read_mac_addr_82575(struct e1000_hw *);
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
static s32 igb_get_invariants_82575(struct e1000_hw *hw)
{
@@ -909,6 +910,12 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw)
if (ret_val)
hw_dbg("PCI-E Master disable polling has failed.\n");
+ /* set the completion timeout for interface */
+ ret_val = igb_set_pcie_completion_timeout(hw);
+ if (ret_val) {
+ hw_dbg("PCI-E Set completion timeout has failed.\n");
+ }
+
hw_dbg("Masking off all interrupts\n");
wr32(E1000_IMC, 0xffffffff);
@@ -1408,6 +1415,57 @@ void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
}
/**
+ * igb_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 200ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
+{
+ u32 gcr = rd32(E1000_GCR);
+ s32 ret_val = 0;
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 200ms through the GCR register
+ */
+ if (!(gcr & E1000_GCR_CAP_VER2)) {
+ gcr |= E1000_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+ if (ret_val)
+ goto out;
+
+ pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+ ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
+
+ wr32(E1000_GCR, gcr);
+ return ret_val;
+}
+
+/**
* igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
* @hw: pointer to the hardware struct
* @enable: state to enter, either enabled or disabled
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index 3bda3db..c858293 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -435,6 +435,12 @@
/* Flow Control */
#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+/* PCI Express Control */
+#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define E1000_GCR_CAP_VER2 0x00040000
+
/* PHY Control Register */
#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
@@ -569,9 +575,11 @@
/* PCI/PCI-X/PCI-EX Config space */
#define PCIE_LINK_STATUS 0x12
+#define PCIE_DEVICE_CONTROL2 0x28
#define PCIE_LINK_WIDTH_MASK 0x3F0
#define PCIE_LINK_WIDTH_SHIFT 4
+#define PCIE_DEVICE_CONTROL2_16ms 0x0005
#define PHY_REVISION_MASK 0xFFFFFFF0
#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index f096ddd..eb41f3b 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -494,5 +494,7 @@ extern char *igb_get_hw_dev_name(struct e1000_hw *hw);
#else
#define hw_dbg(format, arg...)
#endif
-
#endif
+/* These functions must be implemented by drivers */
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 34f1a37..60343b5 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -37,20 +37,6 @@
static s32 igb_set_default_fc(struct e1000_hw *hw);
static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
-static s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
-{
- struct igb_adapter *adapter = hw->back;
- u16 cap_offset;
-
- cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
- if (!cap_offset)
- return -E1000_ERR_CONFIG;
-
- pci_read_config_word(adapter->pdev, cap_offset + reg, value);
-
- return 0;
-}
-
/**
* igb_get_bus_info_pcie - Get PCIe bus information
* @hw: pointer to the HW structure
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 6e59245..345d144 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -305,6 +305,7 @@ enum {
#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
#define E1000_SWSM 0x05B50 /* SW Semaphore */
#define E1000_FWSM 0x05B54 /* FW Semaphore */
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 39b3b6a..2cb5460 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -5029,6 +5029,34 @@ static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
}
}
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+ return 0;
+}
+
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_write_config_word(adapter->pdev, cap_offset + reg, *value);
+
+ return 0;
+}
+
static void igb_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp)
{
generated by cgit v0.10.2 at 2024-11-11 22:15:13 (GMT)