diff options
Diffstat (limited to 'drivers/net/netxen/netxen_nic_niu.c')
| -rw-r--r-- | drivers/net/netxen/netxen_nic_niu.c | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c index c3b9c83..3851a67 100644 --- a/drivers/net/netxen/netxen_nic_niu.c +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -299,14 +299,6 @@ int netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter) return result; } -#if 0 -int netxen_niu_xgbe_clear_phy_interrupts(struct netxen_adapter *adapter) -{ - netxen_crb_writelit_adapter(adapter, NETXEN_NIU_ACTIVE_INT, -1); - return 0; -} -#endif /* 0 */ - static int netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter) { int result = 0; @@ -467,104 +459,6 @@ int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port) return 0; } -#if 0 -/* - * netxen_niu_gbe_handle_phy_interrupt - Handles GbE PHY interrupts - * @param enable 0 means don't enable the port - * 1 means enable (or re-enable) the port - */ -int netxen_niu_gbe_handle_phy_interrupt(struct netxen_adapter *adapter, - int port, long enable) -{ - int result = 0; - __u32 int_src; - - printk(KERN_INFO PFX "NETXEN: Handling PHY interrupt on port %d" - " (device enable = %d)\n", (int)port, (int)enable); - - /* - * The read of the PHY INT status will clear the pending - * interrupt status - */ - if (netxen_niu_gbe_phy_read(adapter, - NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS, - &int_src) != 0) - result = -EINVAL; - else { - printk(KERN_INFO PFX "PHY Interrupt source = 0x%x \n", int_src); - if (netxen_get_phy_int_jabber(int_src)) - printk(KERN_INFO PFX "jabber Interrupt "); - if (netxen_get_phy_int_polarity_changed(int_src)) - printk(KERN_INFO PFX "polarity changed "); - if (netxen_get_phy_int_energy_detect(int_src)) - printk(KERN_INFO PFX "energy detect \n"); - if (netxen_get_phy_int_downshift(int_src)) - printk(KERN_INFO PFX "downshift \n"); - if (netxen_get_phy_int_mdi_xover_changed(int_src)) - printk(KERN_INFO PFX "mdi_xover_changed "); - if (netxen_get_phy_int_fifo_over_underflow(int_src)) - printk(KERN_INFO PFX "fifo_over_underflow "); - if (netxen_get_phy_int_false_carrier(int_src)) - printk(KERN_INFO PFX "false_carrier "); - if (netxen_get_phy_int_symbol_error(int_src)) - printk(KERN_INFO PFX "symbol_error "); - if (netxen_get_phy_int_autoneg_completed(int_src)) - printk(KERN_INFO PFX "autoneg_completed "); - if (netxen_get_phy_int_page_received(int_src)) - printk(KERN_INFO PFX "page_received "); - if (netxen_get_phy_int_duplex_changed(int_src)) - printk(KERN_INFO PFX "duplex_changed "); - if (netxen_get_phy_int_autoneg_error(int_src)) - printk(KERN_INFO PFX "autoneg_error "); - if ((netxen_get_phy_int_speed_changed(int_src)) - || (netxen_get_phy_int_link_status_changed(int_src))) { - __u32 status; - - printk(KERN_INFO PFX - "speed_changed or link status changed"); - if (netxen_niu_gbe_phy_read - (adapter, - NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, - &status) == 0) { - if (netxen_get_phy_speed(status) == 2) { - printk - (KERN_INFO PFX "Link speed changed" - " to 1000 Mbps\n"); - netxen_niu_gbe_set_gmii_mode(adapter, - port, - enable); - } else if (netxen_get_phy_speed(status) == 1) { - printk - (KERN_INFO PFX "Link speed changed" - " to 100 Mbps\n"); - netxen_niu_gbe_set_mii_mode(adapter, - port, - enable); - } else if (netxen_get_phy_speed(status) == 0) { - printk - (KERN_INFO PFX "Link speed changed" - " to 10 Mbps\n"); - netxen_niu_gbe_set_mii_mode(adapter, - port, - enable); - } else { - printk(KERN_ERR PFX "ERROR reading " - "PHY status. Invalid speed.\n"); - result = -1; - } - } else { - printk(KERN_ERR PFX - "ERROR reading PHY status.\n"); - result = -1; - } - - } - printk(KERN_INFO "\n"); - } - return result; -} -#endif /* 0 */ - /* * Return the current station MAC address. * Note that the passed-in value must already be in network byte order. @@ -641,86 +535,6 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter, return 0; } -#if 0 -/* Enable a GbE interface */ -int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter, - int port, netxen_niu_gbe_ifmode_t mode) -{ - __u32 mac_cfg0; - __u32 mac_cfg1; - __u32 mii_cfg; - - if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) - return -EINVAL; - - mac_cfg0 = 0; - netxen_gb_soft_reset(mac_cfg0); - if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), - &mac_cfg0, 4)) - return -EIO; - mac_cfg0 = 0; - netxen_gb_enable_tx(mac_cfg0); - netxen_gb_enable_rx(mac_cfg0); - netxen_gb_unset_rx_flowctl(mac_cfg0); - netxen_gb_tx_reset_pb(mac_cfg0); - netxen_gb_rx_reset_pb(mac_cfg0); - netxen_gb_tx_reset_mac(mac_cfg0); - netxen_gb_rx_reset_mac(mac_cfg0); - - if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), - &mac_cfg0, 4)) - return -EIO; - mac_cfg1 = 0; - netxen_gb_set_preamblelen(mac_cfg1, 0xf); - netxen_gb_set_duplex(mac_cfg1); - netxen_gb_set_crc_enable(mac_cfg1); - netxen_gb_set_padshort(mac_cfg1); - netxen_gb_set_checklength(mac_cfg1); - netxen_gb_set_hugeframes(mac_cfg1); - - if (mode == NETXEN_NIU_10_100_MB) { - netxen_gb_set_intfmode(mac_cfg1, 1); - if (adapter->hw_write_wx(adapter, - NETXEN_NIU_GB_MAC_CONFIG_1(port), - &mac_cfg1, 4)) - return -EIO; - - /* set mii mode */ - netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE + - (port << 3), 0); - netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE + - (port << 3), 1); - - } else if (mode == NETXEN_NIU_1000_MB) { - netxen_gb_set_intfmode(mac_cfg1, 2); - if (adapter->hw_write_wx(adapter, - NETXEN_NIU_GB_MAC_CONFIG_1(port), - &mac_cfg1, 4)) - return -EIO; - /* set gmii mode */ - netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE + - (port << 3), 0); - netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE + - (port << 3), 1); - } - mii_cfg = 0; - netxen_gb_set_mii_mgmt_clockselect(mii_cfg, 7); - if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), - &mii_cfg, 4)) - return -EIO; - mac_cfg0 = 0; - netxen_gb_enable_tx(mac_cfg0); - netxen_gb_enable_rx(mac_cfg0); - netxen_gb_unset_rx_flowctl(mac_cfg0); - netxen_gb_unset_tx_flowctl(mac_cfg0); - - if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), - &mac_cfg0, 4)) - return -EIO; - return 0; -} -#endif /* 0 */ - /* Disable a GbE interface */ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) { @@ -869,39 +683,6 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, return 0; } -#if 0 -/* - * Return the current station MAC address. - * Note that the passed-in value must already be in network byte order. - */ -int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, - netxen_ethernet_macaddr_t * addr) -{ - int phy = adapter->physical_port; - u32 stationhigh; - u32 stationlow; - u8 val[8]; - - if (addr == NULL) - return -EINVAL; - if (phy != 0) - return -EINVAL; - - if (adapter->hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI, - &stationhigh, 4)) - return -EIO; - if (adapter->hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1, - &stationlow, 4)) - return -EIO; - ((__le32 *)val)[1] = cpu_to_le32(stationhigh); - ((__le32 *)val)[0] = cpu_to_le32(stationlow); - - memcpy(addr, val + 2, 6); - - return 0; -} -#endif /* 0 */ - int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, u32 mode) { |