diff options
Diffstat (limited to 'drivers/net/wimax/i2400m/sdio-fw.c')
| -rw-r--r-- | drivers/net/wimax/i2400m/sdio-fw.c | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c new file mode 100644 index 0000000..3487205 --- /dev/null +++ b/drivers/net/wimax/i2400m/sdio-fw.c @@ -0,0 +1,224 @@ +/* + * Intel Wireless WiMAX Connection 2400m + * Firmware uploader's SDIO specifics + * + * + * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * Intel Corporation <linux-wimax@intel.com> + * Yanir Lubetkin <yanirx.lubetkin@intel.com> + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * - Initial implementation + * + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * - Bus generic/specific split for USB + * + * Dirk Brandewie <dirk.j.brandewie@intel.com> + * - Initial implementation for SDIO + * + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * - SDIO rehash for changes in the bus-driver model + * + * THE PROCEDURE + * + * See fw.c for the generic description of this procedure. + * + * This file implements only the SDIO specifics. It boils down to how + * to send a command and waiting for an acknowledgement from the + * device. We do polled reads. + * + * COMMAND EXECUTION + * + * THe generic firmware upload code will call i2400m_bus_bm_cmd_send() + * to send commands. + * + * The SDIO devices expects things in 256 byte blocks, so it will pad + * it, compute the checksum (if needed) and pass it to SDIO. + * + * ACK RECEPTION + * + * This works in polling mode -- the fw loader says when to wait for + * data and for that it calls i2400ms_bus_bm_wait_for_ack(). + * + * This will poll the device for data until it is received. We need to + * receive at least as much bytes as where asked for (although it'll + * always be a multiple of 256 bytes). + */ +#include <linux/mmc/sdio_func.h> +#include "i2400m-sdio.h" + + +#define D_SUBMODULE fw +#include "sdio-debug-levels.h" + +/* + * Send a boot-mode command to the SDIO function + * + * We use a bounce buffer (i2400m->bm_cmd_buf) because we need to + * touch the header if the RAW flag is not set. + * + * @flags: pass thru from i2400m_bm_cmd() + * @return: cmd_size if ok, < 0 errno code on error. + * + * Note the command is padded to the SDIO block size for the device. + */ +ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *i2400m, + const struct i2400m_bootrom_header *_cmd, + size_t cmd_size, int flags) +{ + ssize_t result; + struct device *dev = i2400m_dev(i2400m); + struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m); + int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd); + struct i2400m_bootrom_header *cmd; + /* SDIO restriction */ + size_t cmd_size_a = ALIGN(cmd_size, I2400MS_BLK_SIZE); + + d_fnstart(5, dev, "(i2400m %p cmd %p size %zu)\n", + i2400m, _cmd, cmd_size); + result = -E2BIG; + if (cmd_size > I2400M_BM_CMD_BUF_SIZE) + goto error_too_big; + + memcpy(i2400m->bm_cmd_buf, _cmd, cmd_size); /* Prep command */ + cmd = i2400m->bm_cmd_buf; + if (cmd_size_a > cmd_size) /* Zero pad space */ + memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size); + if ((flags & I2400M_BM_CMD_RAW) == 0) { + if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0)) + dev_warn(dev, "SW BUG: response_required == 0\n"); + i2400m_bm_cmd_prepare(cmd); + } + d_printf(4, dev, "BM cmd %d: %zu bytes (%zu padded)\n", + opcode, cmd_size, cmd_size_a); + d_dump(5, dev, cmd, cmd_size); + + sdio_claim_host(i2400ms->func); /* Send & check */ + result = sdio_memcpy_toio(i2400ms->func, I2400MS_DATA_ADDR, + i2400m->bm_cmd_buf, cmd_size_a); + sdio_release_host(i2400ms->func); + if (result < 0) { + dev_err(dev, "BM cmd %d: cannot send: %ld\n", + opcode, (long) result); + goto error_cmd_send; + } + result = cmd_size; +error_cmd_send: +error_too_big: + d_fnend(5, dev, "(i2400m %p cmd %p size %zu) = %d\n", + i2400m, _cmd, cmd_size, (int) result); + return result; +} + + +/* + * Read an ack from the device's boot-mode (polling) + * + * @i2400m: + * @_ack: pointer to where to store the read data + * @ack_size: how many bytes we should read + * + * Returns: < 0 errno code on error; otherwise, amount of received bytes. + * + * The ACK for a BM command is always at least sizeof(*ack) bytes, so + * check for that. We don't need to check for device reboots + * + * NOTE: We do an artificial timeout of 1 sec over the SDIO timeout; + * this way we have control over it...there is no way that I know + * of setting an SDIO transaction timeout. + */ +ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m, + struct i2400m_bootrom_header *ack, + size_t ack_size) +{ + int result; + ssize_t rx_size; + u64 timeout; + struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m); + struct sdio_func *func = i2400ms->func; + struct device *dev = &func->dev; + + BUG_ON(sizeof(*ack) > ack_size); + + d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n", + i2400m, ack, ack_size); + + timeout = get_jiffies_64() + 2 * HZ; + sdio_claim_host(func); + while (1) { + if (time_after64(get_jiffies_64(), timeout)) { + rx_size = -ETIMEDOUT; + dev_err(dev, "timeout waiting for ack data\n"); + goto error_timedout; + } + + /* Find the RX size, check if it fits or not -- it if + * doesn't fit, fail, as we have no way to dispose of + * the extra data. */ + rx_size = __i2400ms_rx_get_size(i2400ms); + if (rx_size < 0) + goto error_rx_get_size; + result = -ENOSPC; /* Check it fits */ + if (rx_size < sizeof(*ack)) { + rx_size = -EIO; + dev_err(dev, "HW BUG? received is too small (%zu vs " + "%zu needed)\n", sizeof(*ack), rx_size); + goto error_too_small; + } + if (rx_size > I2400M_BM_ACK_BUF_SIZE) { + dev_err(dev, "SW BUG? BM_ACK_BUF is too small (%u vs " + "%zu needed)\n", I2400M_BM_ACK_BUF_SIZE, + rx_size); + goto error_too_small; + } + + /* Read it */ + result = sdio_memcpy_fromio(func, i2400m->bm_ack_buf, + I2400MS_DATA_ADDR, rx_size); + if (result == -ETIMEDOUT || result == -ETIME) + continue; + if (result < 0) { + dev_err(dev, "BM SDIO receive (%zu B) failed: %d\n", + rx_size, result); + goto error_read; + } else + break; + } + rx_size = min((ssize_t)ack_size, rx_size); + memcpy(ack, i2400m->bm_ack_buf, rx_size); +error_read: +error_too_small: +error_rx_get_size: +error_timedout: + sdio_release_host(func); + d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %ld\n", + i2400m, ack, ack_size, (long) rx_size); + return rx_size; +} |