diff options
Diffstat (limited to 'drivers/net/wireless/Kconfig')
| -rw-r--r-- | drivers/net/wireless/Kconfig | 140 |
1 files changed, 16 insertions, 124 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 85f8bf4..56dd665 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -16,118 +16,9 @@ menuconfig WLAN if WLAN -menuconfig WLAN_PRE80211 - bool "Wireless LAN (pre-802.11)" - depends on NETDEVICES - ---help--- - Say Y if you have any pre-802.11 wireless LAN hardware. - - This option does not affect the kernel build, it only - lets you choose drivers. - -config STRIP - tristate "STRIP (Metricom starmode radio IP)" - depends on INET && WLAN_PRE80211 - select WIRELESS_EXT - ---help--- - Say Y if you have a Metricom radio and intend to use Starmode Radio - IP. STRIP is a radio protocol developed for the MosquitoNet project - to send Internet traffic using Metricom radios. Metricom radios are - small, battery powered, 100kbit/sec packet radio transceivers, about - the size and weight of a cellular telephone. (You may also have heard - them called "Metricom modems" but we avoid the term "modem" because - it misleads many people into thinking that you can plug a Metricom - modem into a phone line and use it as a modem.) - - You can use STRIP on any Linux machine with a serial port, although - it is obviously most useful for people with laptop computers. If you - think you might get a Metricom radio in the future, there is no harm - in saying Y to STRIP now, except that it makes the kernel a bit - bigger. - - To compile this as a module, choose M here: the module will be - called strip. - -config ARLAN - tristate "Aironet Arlan 655 & IC2200 DS support" - depends on ISA && !64BIT && WLAN_PRE80211 - select WIRELESS_EXT - ---help--- - Aironet makes Arlan, a class of wireless LAN adapters. These use the - www.Telxon.com chip, which is also used on several similar cards. - This driver is tested on the 655 and IC2200 series cards. Look at - <http://www.ylenurme.ee/~elmer/655/> for the latest information. - - The driver is built as two modules, arlan and arlan-proc. The latter - is the /proc interface and is not needed most of time. - - On some computers the card ends up in non-valid state after some - time. Use a ping-reset script to clear it. - -config WAVELAN - tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" - depends on ISA && WLAN_PRE80211 - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - ---help--- - The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is - a Radio LAN (wireless Ethernet-like Local Area Network) using the - radio frequencies 900 MHz and 2.4 GHz. - - If you want to use an ISA WaveLAN card under Linux, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Some more specific - information is contained in - <file:Documentation/networking/wavelan.txt> and in the source code - <file:drivers/net/wireless/wavelan.p.h>. - - You will also need the wireless tools package available from - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. - Please read the man pages contained therein. - - To compile this driver as a module, choose M here: the module will be - called wavelan. - -config PCMCIA_WAVELAN - tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" - depends on PCMCIA && WLAN_PRE80211 - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - help - Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA - (PC-card) wireless Ethernet networking card to your computer. This - driver is for the non-IEEE-802.11 Wavelan cards. - - To compile this driver as a module, choose M here: the module will be - called wavelan_cs. If unsure, say N. - -config PCMCIA_NETWAVE - tristate "Xircom Netwave AirSurfer Pcmcia wireless support" - depends on PCMCIA && WLAN_PRE80211 - select WIRELESS_EXT - select WEXT_PRIV - help - Say Y here if you intend to attach this type of PCMCIA (PC-card) - wireless Ethernet networking card to your computer. - - To compile this driver as a module, choose M here: the module will be - called netwave_cs. If unsure, say N. - - -menuconfig WLAN_80211 - bool "Wireless LAN (IEEE 802.11)" - depends on NETDEVICES - ---help--- - Say Y if you have any 802.11 wireless LAN hardware. - - This option does not affect the kernel build, it only - lets you choose drivers. - config PCMCIA_RAYCS tristate "Aviator/Raytheon 2.4GHz wireless support" - depends on PCMCIA && WLAN_80211 + depends on PCMCIA select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV @@ -142,7 +33,7 @@ config PCMCIA_RAYCS config LIBERTAS_THINFIRM tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" - depends on WLAN_80211 && MAC80211 + depends on MAC80211 select FW_LOADER ---help--- A library for Marvell Libertas 8xxx devices using thinfirm. @@ -155,7 +46,7 @@ config LIBERTAS_THINFIRM_USB config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" - depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN) + depends on ISA_DMA_API && (PCI || BROKEN) select WIRELESS_EXT select CRYPTO select WEXT_SPY @@ -175,7 +66,7 @@ config AIRO config ATMEL tristate "Atmel at76c50x chipset 802.11b support" - depends on (PCI || PCMCIA) && WLAN_80211 + depends on (PCI || PCMCIA) select WIRELESS_EXT select WEXT_PRIV select FW_LOADER @@ -210,7 +101,7 @@ config PCMCIA_ATMEL config AT76C50X_USB tristate "Atmel at76c503/at76c505/at76c505a USB cards" - depends on MAC80211 && WLAN_80211 && USB + depends on MAC80211 && USB select FW_LOADER ---help--- Enable support for USB Wireless devices using Atmel at76c503, @@ -218,8 +109,9 @@ config AT76C50X_USB config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211 + depends on PCMCIA && (BROKEN || !M32R) select WIRELESS_EXT + select WEXT_SPY select CRYPTO select CRYPTO_AES ---help--- @@ -238,7 +130,7 @@ config AIRO_CS config PCMCIA_WL3501 tristate "Planet WL3501 PCMCIA cards" - depends on EXPERIMENTAL && PCMCIA && WLAN_80211 + depends on EXPERIMENTAL && PCMCIA select WIRELESS_EXT select WEXT_SPY help @@ -248,7 +140,7 @@ config PCMCIA_WL3501 config PRISM54 tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' - depends on PCI && EXPERIMENTAL && WLAN_80211 + depends on PCI && EXPERIMENTAL select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV @@ -272,7 +164,7 @@ config PRISM54 config USB_ZD1201 tristate "USB ZD1201 based Wireless device support" - depends on USB && WLAN_80211 + depends on USB select WIRELESS_EXT select WEXT_PRIV select FW_LOADER @@ -291,7 +183,7 @@ config USB_ZD1201 config USB_NET_RNDIS_WLAN tristate "Wireless RNDIS USB support" - depends on USB && WLAN_80211 && EXPERIMENTAL + depends on USB && EXPERIMENTAL depends on CFG80211 select USB_USBNET select USB_NET_CDCETHER @@ -319,7 +211,7 @@ config USB_NET_RNDIS_WLAN config RTL8180 tristate "Realtek 8180/8185 PCI support" - depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && PCI && EXPERIMENTAL select EEPROM_93CX6 ---help--- This is a driver for RTL8180 and RTL8185 based cards. @@ -375,7 +267,7 @@ config RTL8180 config RTL8187 tristate "Realtek 8187 and 8187B USB support" - depends on MAC80211 && USB && WLAN_80211 + depends on MAC80211 && USB select EEPROM_93CX6 ---help--- This is a driver for RTL8187 and RTL8187B based cards. @@ -404,7 +296,7 @@ config RTL8187_LEDS config ADM8211 tristate "ADMtek ADM8211 support" - depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && PCI && EXPERIMENTAL select CRC32 select EEPROM_93CX6 ---help--- @@ -431,7 +323,7 @@ config ADM8211 config MAC80211_HWSIM tristate "Simulated radio testing tool for mac80211" - depends on MAC80211 && WLAN_80211 + depends on MAC80211 ---help--- This driver is a developer testing tool that can be used to test IEEE 802.11 networking stack (mac80211) functionality. This is not @@ -444,7 +336,7 @@ config MAC80211_HWSIM config MWL8K tristate "Marvell 88W8xxx PCI/PCIe Wireless support" - depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && PCI && EXPERIMENTAL ---help--- This driver supports Marvell TOPDOG 802.11 wireless cards. |