diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/phy.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/phy.c | 1100 |
1 files changed, 877 insertions, 223 deletions
diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c index 72a17c4..13ab4d7 100644 --- a/drivers/net/wireless/ath/ath9k/phy.c +++ b/drivers/net/wireless/ath/ath9k/phy.c @@ -14,91 +14,70 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +/** + * DOC: Programming Atheros 802.11n analog front end radios + * + * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express + * devices have either an external AR2133 analog front end radio for single + * band 2.4 GHz communication or an AR5133 analog front end radio for dual + * band 2.4 GHz / 5 GHz communication. + * + * All devices after the AR5416 and AR5418 family starting with the AR9280 + * have their analog front radios, MAC/BB and host PCIe/USB interface embedded + * into a single-chip and require less programming. + * + * The following single-chips exist with a respective embedded radio: + * + * AR9280 - 11n dual-band 2x2 MIMO for PCIe + * AR9281 - 11n single-band 1x2 MIMO for PCIe + * AR9285 - 11n single-band 1x1 for PCIe + * AR9287 - 11n single-band 2x2 MIMO for PCIe + * + * AR9220 - 11n dual-band 2x2 MIMO for PCI + * AR9223 - 11n single-band 2x2 MIMO for PCI + * + * AR9287 - 11n single-band 1x1 MIMO for USB + */ + #include "hw.h" -void -ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex, u32 freqIndex, - int regWrites) +/** + * ath9k_hw_write_regs - ?? + * + * @ah: atheros hardware structure + * @freqIndex: + * @regWrites: + * + * Used for both the chipsets with an external AR2133/AR5133 radios and + * single-chip devices. + */ +void ath9k_hw_write_regs(struct ath_hw *ah, u32 freqIndex, int regWrites) { REG_WRITE_ARRAY(&ah->iniBB_RfGain, freqIndex, regWrites); } -bool -ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) -{ - struct ath_common *common = ath9k_hw_common(ah); - u32 channelSel = 0; - u32 bModeSynth = 0; - u32 aModeRefSel = 0; - u32 reg32 = 0; - u16 freq; - struct chan_centers centers; - - ath9k_hw_get_channel_centers(ah, chan, ¢ers); - freq = centers.synth_center; - - if (freq < 4800) { - u32 txctl; - - if (((freq - 2192) % 5) == 0) { - channelSel = ((freq - 672) * 2 - 3040) / 10; - bModeSynth = 0; - } else if (((freq - 2224) % 5) == 0) { - channelSel = ((freq - 704) * 2 - 3040) / 10; - bModeSynth = 1; - } else { - ath_print(common, ATH_DBG_FATAL, - "Invalid channel %u MHz\n", freq); - return false; - } - - channelSel = (channelSel << 2) & 0xff; - channelSel = ath9k_hw_reverse_bits(channelSel, 8); - - txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); - if (freq == 2484) { - - REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, - txctl | AR_PHY_CCK_TX_CTRL_JAPAN); - } else { - REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, - txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN); - } - - } else if ((freq % 20) == 0 && freq >= 5120) { - channelSel = - ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8); - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else if ((freq % 10) == 0) { - channelSel = - ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8); - if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) - aModeRefSel = ath9k_hw_reverse_bits(2, 2); - else - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else if ((freq % 5) == 0) { - channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8); - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else { - ath_print(common, ATH_DBG_FATAL, - "Invalid channel %u MHz\n", freq); - return false; - } - - reg32 = - (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) | - (1 << 5) | 0x1; - - REG_WRITE(ah, AR_PHY(0x37), reg32); - - ah->curchan = chan; - ah->curchan_rad_index = -1; - - return true; -} - -void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, - struct ath9k_channel *chan) +/** + * ath9k_hw_ar9280_set_channel - set channel on single-chip device + * @ah: atheros hardware structure + * @chan: + * + * This is the function to change channel on single-chip devices, that is + * all devices after ar9280. + * + * This function takes the channel value in MHz and sets + * hardware channel value. Assumes writes have been enabled to analog bus. + * + * Actual Expression, + * + * For 2GHz channel, + * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17) + * (freq_ref = 40MHz) + * + * For 5GHz channel, + * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10) + * (freq_ref = 40MHz/(24>>amodeRefSel)) + */ +int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) { u16 bMode, fracMode, aModeRefSel = 0; u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0; @@ -111,7 +90,7 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL); reg32 &= 0xc0000000; - if (freq < 4800) { + if (freq < 4800) { /* 2 GHz, fractional mode */ u32 txctl; int regWrites = 0; @@ -122,6 +101,7 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, if (AR_SREV_9287_11_OR_LATER(ah)) { if (freq == 2484) { + /* Enable channel spreading for channel 14 */ REG_WRITE_ARRAY(&ah->iniCckfirJapan2484, 1, regWrites); } else { @@ -155,10 +135,15 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, case 1: default: aModeRefSel = 0; + /* + * Enable 2G (fractional) mode for channels + * which are 5MHz spaced. + */ fracMode = 1; refDivA = 1; channelSel = (freq * 0x8000) / 15; + /* RefDivA setting */ REG_RMW_FIELD(ah, AR_AN_SYNTH9, AR_AN_SYNTH9_REFDIVA, refDivA); @@ -180,12 +165,284 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, ah->curchan = chan; ah->curchan_rad_index = -1; + + return 0; +} + +/** + * ath9k_hw_9280_spur_mitigate - convert baseband spur frequency + * @ah: atheros hardware structure + * @chan: + * + * For single-chip solutions. Converts to baseband spur frequency given the + * input channel frequency and compute register settings below. + */ +void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) +{ + int bb_spur = AR_NO_SPUR; + int freq; + int bin, cur_bin; + int bb_spur_off, spur_subchannel_sd; + int spur_freq_sd; + int spur_delta_phase; + int denominator; + int upper, lower, cur_vit_mask; + int tmp, newVal; + int i; + int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, + AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 + }; + int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, + AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 + }; + int inc[4] = { 0, 100, 0, 0 }; + struct chan_centers centers; + + int8_t mask_m[123]; + int8_t mask_p[123]; + int8_t mask_amt; + int tmp_mask; + int cur_bb_spur; + bool is2GHz = IS_CHAN_2GHZ(chan); + + memset(&mask_m, 0, sizeof(int8_t) * 123); + memset(&mask_p, 0, sizeof(int8_t) * 123); + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + freq = centers.synth_center; + + ah->config.spurmode = SPUR_ENABLE_EEPROM; + for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { + cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); + + if (is2GHz) + cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; + else + cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; + + if (AR_NO_SPUR == cur_bb_spur) + break; + cur_bb_spur = cur_bb_spur - freq; + + if (IS_CHAN_HT40(chan)) { + if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && + (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { + bb_spur = cur_bb_spur; + break; + } + } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && + (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { + bb_spur = cur_bb_spur; + break; + } + } + + if (AR_NO_SPUR == bb_spur) { + REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, + AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); + return; + } else { + REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, + AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); + } + + bin = bb_spur * 320; + + tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); + + newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | + AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | + AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | + AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); + REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal); + + newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | + AR_PHY_SPUR_REG_ENABLE_MASK_PPM | + AR_PHY_SPUR_REG_MASK_RATE_SELECT | + AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | + SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); + REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); + + if (IS_CHAN_HT40(chan)) { + if (bb_spur < 0) { + spur_subchannel_sd = 1; + bb_spur_off = bb_spur + 10; + } else { + spur_subchannel_sd = 0; + bb_spur_off = bb_spur - 10; + } + } else { + spur_subchannel_sd = 0; + bb_spur_off = bb_spur; + } + + if (IS_CHAN_HT40(chan)) + spur_delta_phase = + ((bb_spur * 262144) / + 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; + else + spur_delta_phase = + ((bb_spur * 524288) / + 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; + + denominator = IS_CHAN_2GHZ(chan) ? 44 : 40; + spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; + + newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | + SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | + SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); + REG_WRITE(ah, AR_PHY_TIMING11, newVal); + + newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; + REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); + + cur_bin = -6000; + upper = bin + 100; + lower = bin - 100; + + for (i = 0; i < 4; i++) { + int pilot_mask = 0; + int chan_mask = 0; + int bp = 0; + for (bp = 0; bp < 30; bp++) { + if ((cur_bin > lower) && (cur_bin < upper)) { + pilot_mask = pilot_mask | 0x1 << bp; + chan_mask = chan_mask | 0x1 << bp; + } + cur_bin += 100; + } + cur_bin += inc[i]; + REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); + REG_WRITE(ah, chan_mask_reg[i], chan_mask); + } + + cur_vit_mask = 6100; + upper = bin + 120; + lower = bin - 120; + + for (i = 0; i < 123; i++) { + if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { + + /* workaround for gcc bug #37014 */ + volatile int tmp_v = abs(cur_vit_mask - bin); + + if (tmp_v < 75) + mask_amt = 1; + else + mask_amt = 0; + if (cur_vit_mask < 0) + mask_m[abs(cur_vit_mask / 100)] = mask_amt; + else + mask_p[cur_vit_mask / 100] = mask_amt; + } + cur_vit_mask -= 100; + } + + tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) + | (mask_m[48] << 26) | (mask_m[49] << 24) + | (mask_m[50] << 22) | (mask_m[51] << 20) + | (mask_m[52] << 18) | (mask_m[53] << 16) + | (mask_m[54] << 14) | (mask_m[55] << 12) + | (mask_m[56] << 10) | (mask_m[57] << 8) + | (mask_m[58] << 6) | (mask_m[59] << 4) + | (mask_m[60] << 2) | (mask_m[61] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); + REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); + + tmp_mask = (mask_m[31] << 28) + | (mask_m[32] << 26) | (mask_m[33] << 24) + | (mask_m[34] << 22) | (mask_m[35] << 20) + | (mask_m[36] << 18) | (mask_m[37] << 16) + | (mask_m[48] << 14) | (mask_m[39] << 12) + | (mask_m[40] << 10) | (mask_m[41] << 8) + | (mask_m[42] << 6) | (mask_m[43] << 4) + | (mask_m[44] << 2) | (mask_m[45] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); + + tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) + | (mask_m[18] << 26) | (mask_m[18] << 24) + | (mask_m[20] << 22) | (mask_m[20] << 20) + | (mask_m[22] << 18) | (mask_m[22] << 16) + | (mask_m[24] << 14) | (mask_m[24] << 12) + | (mask_m[25] << 10) | (mask_m[26] << 8) + | (mask_m[27] << 6) | (mask_m[28] << 4) + | (mask_m[29] << 2) | (mask_m[30] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); + + tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) + | (mask_m[2] << 26) | (mask_m[3] << 24) + | (mask_m[4] << 22) | (mask_m[5] << 20) + | (mask_m[6] << 18) | (mask_m[7] << 16) + | (mask_m[8] << 14) | (mask_m[9] << 12) + | (mask_m[10] << 10) | (mask_m[11] << 8) + | (mask_m[12] << 6) | (mask_m[13] << 4) + | (mask_m[14] << 2) | (mask_m[15] << 0); + REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); + + tmp_mask = (mask_p[15] << 28) + | (mask_p[14] << 26) | (mask_p[13] << 24) + | (mask_p[12] << 22) | (mask_p[11] << 20) + | (mask_p[10] << 18) | (mask_p[9] << 16) + | (mask_p[8] << 14) | (mask_p[7] << 12) + | (mask_p[6] << 10) | (mask_p[5] << 8) + | (mask_p[4] << 6) | (mask_p[3] << 4) + | (mask_p[2] << 2) | (mask_p[1] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); + + tmp_mask = (mask_p[30] << 28) + | (mask_p[29] << 26) | (mask_p[28] << 24) + | (mask_p[27] << 22) | (mask_p[26] << 20) + | (mask_p[25] << 18) | (mask_p[24] << 16) + | (mask_p[23] << 14) | (mask_p[22] << 12) + | (mask_p[21] << 10) | (mask_p[20] << 8) + | (mask_p[19] << 6) | (mask_p[18] << 4) + | (mask_p[17] << 2) | (mask_p[16] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); + + tmp_mask = (mask_p[45] << 28) + | (mask_p[44] << 26) | (mask_p[43] << 24) + | (mask_p[42] << 22) | (mask_p[41] << 20) + | (mask_p[40] << 18) | (mask_p[39] << 16) + | (mask_p[38] << 14) | (mask_p[37] << 12) + | (mask_p[36] << 10) | (mask_p[35] << 8) + | (mask_p[34] << 6) | (mask_p[33] << 4) + | (mask_p[32] << 2) | (mask_p[31] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); + + tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) + | (mask_p[59] << 26) | (mask_p[58] << 24) + | (mask_p[57] << 22) | (mask_p[56] << 20) + | (mask_p[55] << 18) | (mask_p[54] << 16) + | (mask_p[53] << 14) | (mask_p[52] << 12) + | (mask_p[51] << 10) | (mask_p[50] << 8) + | (mask_p[49] << 6) | (mask_p[48] << 4) + | (mask_p[47] << 2) | (mask_p[46] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); } -static void -ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, - u32 numBits, u32 firstBit, - u32 column) +/* All code below is for non single-chip solutions */ + +/** + * ath9k_phy_modify_rx_buffer() - perform analog swizzling of parameters + * @rfbuf: + * @reg32: + * @numBits: + * @firstBit: + * @column: + * + * Performs analog "swizzling" of parameters into their location. + * Used on external AR2133/AR5133 radios. + */ +static void ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, + u32 numBits, u32 firstBit, + u32 column) { u32 tmp32, mask, arrayEntry, lastBit; int32_t bitPosition, bitsLeft; @@ -209,26 +466,556 @@ ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, } } -bool -ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, - u16 modesIndex) +/* + * Fix on 2.4 GHz band for orientation sensitivity issue by increasing + * rf_pwd_icsyndiv. + * + * Theoretical Rules: + * if 2 GHz band + * if forceBiasAuto + * if synth_freq < 2412 + * bias = 0 + * else if 2412 <= synth_freq <= 2422 + * bias = 1 + * else // synth_freq > 2422 + * bias = 2 + * else if forceBias > 0 + * bias = forceBias & 7 + * else + * no change, use value from ini file + * else + * no change, invalid band + * + * 1st Mod: + * 2422 also uses value of 2 + * <approved> + * + * 2nd Mod: + * Less than 2412 uses value of 0, 2412 and above uses value of 2 + */ +static void ath9k_hw_force_bias(struct ath_hw *ah, u16 synth_freq) +{ + struct ath_common *common = ath9k_hw_common(ah); + u32 tmp_reg; + int reg_writes = 0; + u32 new_bias = 0; + + if (!AR_SREV_5416(ah) || synth_freq >= 3000) { + return; + } + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + if (synth_freq < 2412) + new_bias = 0; + else if (synth_freq < 2422) + new_bias = 1; + else + new_bias = 2; + + /* pre-reverse this field */ + tmp_reg = ath9k_hw_reverse_bits(new_bias, 3); + + ath_print(common, ATH_DBG_CONFIG, + "Force rf_pwd_icsyndiv to %1d on %4d\n", + new_bias, synth_freq); + + /* swizzle rf_pwd_icsyndiv */ + ath9k_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3); + + /* write Bank 6 with new params */ + REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, reg_writes); +} + +/** + * ath9k_hw_decrease_chain_power() + * + * @ah: atheros hardware structure + * @chan: + * + * Only used on the AR5416 and AR5418 with the external AR2133/AR5133 radios. + * + * Sets a chain internal RF path to the lowest output power. Any + * further writes to bank6 after this setting will override these + * changes. Thus this function must be the last function in the + * sequence to modify bank 6. + * + * This function must be called after ar5416SetRfRegs() which is + * called from ath9k_hw_process_ini() due to swizzling of bank 6. + * Depends on ah->analogBank6Data being initialized by + * ath9k_hw_set_rf_regs() + * + * Additional additive reduction in power - + * change chain's switch table so chain's tx state is actually the rx + * state value. May produce different results in 2GHz/5GHz as well as + * board to board but in general should be a reduction. + * + * Activated by #ifdef ALTER_SWITCH. Not tried yet. If so, must be + * called after ah->eep_ops->set_board_values() due to RMW of + * PHY_SWITCH_CHAIN_0. + */ +void ath9k_hw_decrease_chain_power(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + int i, regWrites = 0; + u32 bank6SelMask; + u32 *bank6Temp = ah->bank6Temp; + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + switch (ah->config.diversity_control) { + case ATH9K_ANT_FIXED_A: + bank6SelMask = + (ah->config.antenna_switch_swap & ANTSWAP_AB) ? + REDUCE_CHAIN_0 : /* swapped, reduce chain 0 */ + REDUCE_CHAIN_1; /* normal, select chain 1/2 to reduce */ + break; + case ATH9K_ANT_FIXED_B: + bank6SelMask = + (ah->config.antenna_switch_swap & ANTSWAP_AB) ? + REDUCE_CHAIN_1 : /* swapped, reduce chain 1/2 */ + REDUCE_CHAIN_0; /* normal, select chain 0 to reduce */ + break; + case ATH9K_ANT_VARIABLE: + return; /* do not change anything */ + break; + default: + return; /* do not change anything */ + break; + } + + for (i = 0; i < ah->iniBank6.ia_rows; i++) + bank6Temp[i] = ah->analogBank6Data[i]; + + /* Write Bank 5 to switch Bank 6 write to selected chain only */ + REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask); + + /* + * Modify Bank6 selected chain to use lowest amplification. + * Modifies the parameters to a value of 1. + * Depends on existing bank 6 values to be cached in + * ah->analogBank6Data + */ + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0); + + REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites); + + REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053); +#ifdef ALTER_SWITCH + REG_WRITE(ah, PHY_SWITCH_CHAIN_0, + (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38) + | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38)); +#endif +} + +/** + * ath9k_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios + * @ah: atheros hardware stucture + * @chan: + * + * For the external AR2133/AR5133 radios, takes the MHz channel value and set + * the channel value. Assumes writes enabled to analog bus and bank6 register + * cache in ah->analogBank6Data. + */ +int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) +{ + struct ath_common *common = ath9k_hw_common(ah); + u32 channelSel = 0; + u32 bModeSynth = 0; + u32 aModeRefSel = 0; + u32 reg32 = 0; + u16 freq; + struct chan_centers centers; + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + freq = centers.synth_center; + + if (freq < 4800) { + u32 txctl; + + if (((freq - 2192) % 5) == 0) { + channelSel = ((freq - 672) * 2 - 3040) / 10; + bModeSynth = 0; + } else if (((freq - 2224) % 5) == 0) { + channelSel = ((freq - 704) * 2 - 3040) / 10; + bModeSynth = 1; + } else { + ath_print(common, ATH_DBG_FATAL, + "Invalid channel %u MHz\n", freq); + return -EINVAL; + } + + channelSel = (channelSel << 2) & 0xff; + channelSel = ath9k_hw_reverse_bits(channelSel, 8); + + txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); + if (freq == 2484) { + + REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, + txctl | AR_PHY_CCK_TX_CTRL_JAPAN); + } else { + REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, + txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN); + } + + } else if ((freq % 20) == 0 && freq >= 5120) { + channelSel = + ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8); + aModeRefSel = ath9k_hw_reverse_bits(1, 2); + } else if ((freq % 10) == 0) { + channelSel = + ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8); + if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) + aModeRefSel = ath9k_hw_reverse_bits(2, 2); + else + aModeRefSel = ath9k_hw_reverse_bits(1, 2); + } else if ((freq % 5) == 0) { + channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8); + aModeRefSel = ath9k_hw_reverse_bits(1, 2); + } else { + ath_print(common, ATH_DBG_FATAL, + "Invalid channel %u MHz\n", freq); + return -EINVAL; + } + + ath9k_hw_force_bias(ah, freq); + ath9k_hw_decrease_chain_power(ah, chan); + + reg32 = + (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) | + (1 << 5) | 0x1; + + REG_WRITE(ah, AR_PHY(0x37), reg32); + + ah->curchan = chan; + ah->curchan_rad_index = -1; + + return 0; +} + +/** + * ath9k_hw_spur_mitigate - convert baseband spur frequency for external radios + * @ah: atheros hardware structure + * @chan: + * + * For non single-chip solutions. Converts to baseband spur frequency given the + * input channel frequency and compute register settings below. + */ +void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) +{ + int bb_spur = AR_NO_SPUR; + int bin, cur_bin; + int spur_freq_sd; + int spur_delta_phase; + int denominator; + int upper, lower, cur_vit_mask; + int tmp, new; + int i; + int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, + AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 + }; + int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, + AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 + }; + int inc[4] = { 0, 100, 0, 0 }; + + int8_t mask_m[123]; + int8_t mask_p[123]; + int8_t mask_amt; + int tmp_mask; + int cur_bb_spur; + bool is2GHz = IS_CHAN_2GHZ(chan); + + memset(&mask_m, 0, sizeof(int8_t) * 123); + memset(&mask_p, 0, sizeof(int8_t) * 123); + + for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { + cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); + if (AR_NO_SPUR == cur_bb_spur) + break; + cur_bb_spur = cur_bb_spur - (chan->channel * 10); + if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) { + bb_spur = cur_bb_spur; + break; + } + } + + if (AR_NO_SPUR == bb_spur) + return; + + bin = bb_spur * 32; + + tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); + new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | + AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | + AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | + AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); + + REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new); + + new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | + AR_PHY_SPUR_REG_ENABLE_MASK_PPM | + AR_PHY_SPUR_REG_MASK_RATE_SELECT | + AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | + SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); + REG_WRITE(ah, AR_PHY_SPUR_REG, new); + + spur_delta_phase = ((bb_spur * 524288) / 100) & + AR_PHY_TIMING11_SPUR_DELTA_PHASE; + + denominator = IS_CHAN_2GHZ(chan) ? 440 : 400; + spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff; + + new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | + SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | + SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); + REG_WRITE(ah, AR_PHY_TIMING11, new); + + cur_bin = -6000; + upper = bin + 100; + lower = bin - 100; + + for (i = 0; i < 4; i++) { + int pilot_mask = 0; + int chan_mask = 0; + int bp = 0; + for (bp = 0; bp < 30; bp++) { + if ((cur_bin > lower) && (cur_bin < upper)) { + pilot_mask = pilot_mask | 0x1 << bp; + chan_mask = chan_mask | 0x1 << bp; + } + cur_bin += 100; + } + cur_bin += inc[i]; + REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); + REG_WRITE(ah, chan_mask_reg[i], chan_mask); + } + + cur_vit_mask = 6100; + upper = bin + 120; + lower = bin - 120; + + for (i = 0; i < 123; i++) { + if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { + + /* workaround for gcc bug #37014 */ + volatile int tmp_v = abs(cur_vit_mask - bin); + + if (tmp_v < 75) + mask_amt = 1; + else + mask_amt = 0; + if (cur_vit_mask < 0) + mask_m[abs(cur_vit_mask / 100)] = mask_amt; + else + mask_p[cur_vit_mask / 100] = mask_amt; + } + cur_vit_mask -= 100; + } + + tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) + | (mask_m[48] << 26) | (mask_m[49] << 24) + | (mask_m[50] << 22) | (mask_m[51] << 20) + | (mask_m[52] << 18) | (mask_m[53] << 16) + | (mask_m[54] << 14) | (mask_m[55] << 12) + | (mask_m[56] << 10) | (mask_m[57] << 8) + | (mask_m[58] << 6) | (mask_m[59] << 4) + | (mask_m[60] << 2) | (mask_m[61] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); + REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); + + tmp_mask = (mask_m[31] << 28) + | (mask_m[32] << 26) | (mask_m[33] << 24) + | (mask_m[34] << 22) | (mask_m[35] << 20) + | (mask_m[36] << 18) | (mask_m[37] << 16) + | (mask_m[48] << 14) | (mask_m[39] << 12) + | (mask_m[40] << 10) | (mask_m[41] << 8) + | (mask_m[42] << 6) | (mask_m[43] << 4) + | (mask_m[44] << 2) | (mask_m[45] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); + + tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) + | (mask_m[18] << 26) | (mask_m[18] << 24) + | (mask_m[20] << 22) | (mask_m[20] << 20) + | (mask_m[22] << 18) | (mask_m[22] << 16) + | (mask_m[24] << 14) | (mask_m[24] << 12) + | (mask_m[25] << 10) | (mask_m[26] << 8) + | (mask_m[27] << 6) | (mask_m[28] << 4) + | (mask_m[29] << 2) | (mask_m[30] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); + + tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) + | (mask_m[2] << 26) | (mask_m[3] << 24) + | (mask_m[4] << 22) | (mask_m[5] << 20) + | (mask_m[6] << 18) | (mask_m[7] << 16) + | (mask_m[8] << 14) | (mask_m[9] << 12) + | (mask_m[10] << 10) | (mask_m[11] << 8) + | (mask_m[12] << 6) | (mask_m[13] << 4) + | (mask_m[14] << 2) | (mask_m[15] << 0); + REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); + + tmp_mask = (mask_p[15] << 28) + | (mask_p[14] << 26) | (mask_p[13] << 24) + | (mask_p[12] << 22) | (mask_p[11] << 20) + | (mask_p[10] << 18) | (mask_p[9] << 16) + | (mask_p[8] << 14) | (mask_p[7] << 12) + | (mask_p[6] << 10) | (mask_p[5] << 8) + | (mask_p[4] << 6) | (mask_p[3] << 4) + | (mask_p[2] << 2) | (mask_p[1] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); + + tmp_mask = (mask_p[30] << 28) + | (mask_p[29] << 26) | (mask_p[28] << 24) + | (mask_p[27] << 22) | (mask_p[26] << 20) + | (mask_p[25] << 18) | (mask_p[24] << 16) + | (mask_p[23] << 14) | (mask_p[22] << 12) + | (mask_p[21] << 10) | (mask_p[20] << 8) + | (mask_p[19] << 6) | (mask_p[18] << 4) + | (mask_p[17] << 2) | (mask_p[16] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); + + tmp_mask = (mask_p[45] << 28) + | (mask_p[44] << 26) | (mask_p[43] << 24) + | (mask_p[42] << 22) | (mask_p[41] << 20) + | (mask_p[40] << 18) | (mask_p[39] << 16) + | (mask_p[38] << 14) | (mask_p[37] << 12) + | (mask_p[36] << 10) | (mask_p[35] << 8) + | (mask_p[34] << 6) | (mask_p[33] << 4) + | (mask_p[32] << 2) | (mask_p[31] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); + + tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) + | (mask_p[59] << 26) | (mask_p[58] << 24) + | (mask_p[57] << 22) | (mask_p[56] << 20) + | (mask_p[55] << 18) | (mask_p[54] << 16) + | (mask_p[53] << 14) | (mask_p[52] << 12) + | (mask_p[51] << 10) | (mask_p[50] << 8) + | (mask_p[49] << 6) | (mask_p[48] << 4) + | (mask_p[47] << 2) | (mask_p[46] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); +} + +/** + * ath9k_hw_rf_alloc_ext_banks - allocates banks for external radio programming + * @ah: atheros hardware structure + * + * Only required for older devices with external AR2133/AR5133 radios. + */ +int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah) +{ +#define ATH_ALLOC_BANK(bank, size) do { \ + bank = kzalloc((sizeof(u32) * size), GFP_KERNEL); \ + if (!bank) { \ + ath_print(common, ATH_DBG_FATAL, \ + "Cannot allocate RF banks\n"); \ + return -ENOMEM; \ + } \ + } while (0); + + struct ath_common *common = ath9k_hw_common(ah); + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows); + ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows); + ATH_ALLOC_BANK(ah->analogBank2Data, ah->iniBank2.ia_rows); + ATH_ALLOC_BANK(ah->analogBank3Data, ah->iniBank3.ia_rows); + ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows); + ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows); + ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows); + ATH_ALLOC_BANK(ah->addac5416_21, + ah->iniAddac.ia_rows * ah->iniAddac.ia_columns); + ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows); + + return 0; +#undef ATH_ALLOC_BANK +} + + +/** + * ath9k_hw_rf_free_ext_banks - Free memory for analog bank scratch buffers + * @ah: atheros hardware struture + * For the external AR2133/AR5133 radios banks. + */ +void +ath9k_hw_rf_free_ext_banks(struct ath_hw *ah) +{ +#define ATH_FREE_BANK(bank) do { \ + kfree(bank); \ + bank = NULL; \ + } while (0); + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + ATH_FREE_BANK(ah->analogBank0Data); + ATH_FREE_BANK(ah->analogBank1Data); + ATH_FREE_BANK(ah->analogBank2Data); + ATH_FREE_BANK(ah->analogBank3Data); + ATH_FREE_BANK(ah->analogBank6Data); + ATH_FREE_BANK(ah->analogBank6TPCData); + ATH_FREE_BANK(ah->analogBank7Data); + ATH_FREE_BANK(ah->addac5416_21); + ATH_FREE_BANK(ah->bank6Temp); + +#undef ATH_FREE_BANK +} + +/* * + * ath9k_hw_set_rf_regs - programs rf registers based on EEPROM + * @ah: atheros hardware structure + * @chan: + * @modesIndex: + * + * Used for the external AR2133/AR5133 radios. + * + * Reads the EEPROM header info from the device structure and programs + * all rf registers. This routine requires access to the analog + * rf device. This is not required for single-chip devices. + */ +bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, + u16 modesIndex) { u32 eepMinorRev; u32 ob5GHz = 0, db5GHz = 0; u32 ob2GHz = 0, db2GHz = 0; int regWrites = 0; + /* + * Software does not need to program bank data + * for single chip devices, that is AR9280 or anything + * after that. + */ if (AR_SREV_9280_10_OR_LATER(ah)) return true; + /* Setup rf parameters */ eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV); + /* Setup Bank 0 Write */ RF_BANK_SETUP(ah->analogBank0Data, &ah->iniBank0, 1); + /* Setup Bank 1 Write */ RF_BANK_SETUP(ah->analogBank1Data, &ah->iniBank1, 1); + /* Setup Bank 2 Write */ RF_BANK_SETUP(ah->analogBank2Data, &ah->iniBank2, 1); + /* Setup Bank 6 Write */ RF_BANK_SETUP(ah->analogBank3Data, &ah->iniBank3, modesIndex); { @@ -239,6 +1026,7 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, } } + /* Only the 5 or 2 GHz OB/DB need to be set for a mode */ if (eepMinorRev >= 2) { if (IS_CHAN_2GHZ(chan)) { ob2GHz = ah->eep_ops->get_eeprom(ah, EEP_OB_2); @@ -257,8 +1045,10 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, } } + /* Setup Bank 7 Setup */ RF_BANK_SETUP(ah->analogBank7Data, &ah->iniBank7, 1); + /* Write Analog registers */ REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data, regWrites); REG_WRITE_RF_ARRAY(&ah->iniBank1, ah->analogBank1Data, @@ -274,139 +1064,3 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, return true; } - -void -ath9k_hw_rf_free(struct ath_hw *ah) -{ -#define ATH_FREE_BANK(bank) do { \ - kfree(bank); \ - bank = NULL; \ - } while (0); - - ATH_FREE_BANK(ah->analogBank0Data); - ATH_FREE_BANK(ah->analogBank1Data); - ATH_FREE_BANK(ah->analogBank2Data); - ATH_FREE_BANK(ah->analogBank3Data); - ATH_FREE_BANK(ah->analogBank6Data); - ATH_FREE_BANK(ah->analogBank6TPCData); - ATH_FREE_BANK(ah->analogBank7Data); - ATH_FREE_BANK(ah->addac5416_21); - ATH_FREE_BANK(ah->bank6Temp); -#undef ATH_FREE_BANK -} - -bool ath9k_hw_init_rf(struct ath_hw *ah, int *status) -{ - struct ath_common *common = ath9k_hw_common(ah); - - if (!AR_SREV_9280_10_OR_LATER(ah)) { - ah->analogBank0Data = - kzalloc((sizeof(u32) * - ah->iniBank0.ia_rows), GFP_KERNEL); - ah->analogBank1Data = - kzalloc((sizeof(u32) * - ah->iniBank1.ia_rows), GFP_KERNEL); - ah->analogBank2Data = - kzalloc((sizeof(u32) * - ah->iniBank2.ia_rows), GFP_KERNEL); - ah->analogBank3Data = - kzalloc((sizeof(u32) * - ah->iniBank3.ia_rows), GFP_KERNEL); - ah->analogBank6Data = - kzalloc((sizeof(u32) * - ah->iniBank6.ia_rows), GFP_KERNEL); - ah->analogBank6TPCData = - kzalloc((sizeof(u32) * - ah->iniBank6TPC.ia_rows), GFP_KERNEL); - ah->analogBank7Data = - kzalloc((sizeof(u32) * - ah->iniBank7.ia_rows), GFP_KERNEL); - - if (ah->analogBank0Data == NULL - || ah->analogBank1Data == NULL - || ah->analogBank2Data == NULL - || ah->analogBank3Data == NULL - || ah->analogBank6Data == NULL - || ah->analogBank6TPCData == NULL - || ah->analogBank7Data == NULL) { - ath_print(common, ATH_DBG_FATAL, - "Cannot allocate RF banks\n"); - *status = -ENOMEM; - return false; - } - - ah->addac5416_21 = - kzalloc((sizeof(u32) * - ah->iniAddac.ia_rows * - ah->iniAddac.ia_columns), GFP_KERNEL); - if (ah->addac5416_21 == NULL) { - ath_print(common, ATH_DBG_FATAL, - "Cannot allocate addac5416_21\n"); - *status = -ENOMEM; - return false; - } - - ah->bank6Temp = - kzalloc((sizeof(u32) * - ah->iniBank6.ia_rows), GFP_KERNEL); - if (ah->bank6Temp == NULL) { - ath_print(common, ATH_DBG_FATAL, - "Cannot allocate bank6Temp\n"); - *status = -ENOMEM; - return false; - } - } - - return true; -} - -void -ath9k_hw_decrease_chain_power(struct ath_hw *ah, struct ath9k_channel *chan) -{ - int i, regWrites = 0; - u32 bank6SelMask; - u32 *bank6Temp = ah->bank6Temp; - - switch (ah->config.diversity_control) { - case ATH9K_ANT_FIXED_A: - bank6SelMask = - (ah->config.antenna_switch_swap & ANTSWAP_AB) ? - REDUCE_CHAIN_0 : REDUCE_CHAIN_1; - break; - case ATH9K_ANT_FIXED_B: - bank6SelMask = - (ah->config.antenna_switch_swap & ANTSWAP_AB) ? - REDUCE_CHAIN_1 : REDUCE_CHAIN_0; - break; - case ATH9K_ANT_VARIABLE: - return; - break; - default: - return; - break; - } - - for (i = 0; i < ah->iniBank6.ia_rows; i++) - bank6Temp[i] = ah->analogBank6Data[i]; - - REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask); - - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0); - - REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites); - - REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053); -#ifdef ALTER_SWITCH - REG_WRITE(ah, PHY_SWITCH_CHAIN_0, - (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38) - | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38)); -#endif -} |