3 files changed, 15 insertions, 29 deletions

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 7a28d21..287c6b6 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -78,8 +78,8 @@ config B43_PCMCIA
 	  If unsure, say N.
 
 config B43_SDIO
-	bool "Broadcom 43xx SDIO device support (EXPERIMENTAL)"
-	depends on B43 && SSB_SDIOHOST_POSSIBLE && EXPERIMENTAL
+	bool "Broadcom 43xx SDIO device support"
+	depends on B43 && SSB_SDIOHOST_POSSIBLE
 	select SSB_SDIOHOST
 	---help---
 	  Broadcom 43xx device support for Soft-MAC SDIO devices.
@@ -109,8 +109,8 @@ config B43_PIO
 	default y
 
 config B43_PHY_N
-	bool "Support for 802.11n (N-PHY) devices (EXPERIMENTAL)"
-	depends on B43 && EXPERIMENTAL
+	bool "Support for 802.11n (N-PHY) devices"
+	depends on B43
 	---help---
 	  Support for the N-PHY.
 
@@ -130,8 +130,8 @@ config B43_PHY_LP
 	  (802.11a support is optional, and currently disabled).
 
 config B43_PHY_HT
-	bool "Support for HT-PHY (high throughput) devices (EXPERIMENTAL)"
-	depends on B43 && EXPERIMENTAL
+	bool "Support for HT-PHY (high throughput) devices"
+	depends on B43
 	---help---
 	  Support for the HT-PHY.
 
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index 315b96e..9fdd198 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -169,7 +169,7 @@ struct b43_dmadesc_generic {
 
 /* DMA engine tuning knobs */
 #define B43_TXRING_SLOTS		256
-#define B43_RXRING_SLOTS		64
+#define B43_RXRING_SLOTS		256
 #define B43_DMA0_RX_FW598_BUFSIZE	(B43_DMA0_RX_FW598_FO + IEEE80211_MAX_FRAME_LEN)
 #define B43_DMA0_RX_FW351_BUFSIZE	(B43_DMA0_RX_FW351_FO + IEEE80211_MAX_FRAME_LEN)
 
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index 97d4e27..aaca60c 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -3226,8 +3226,6 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
 {
 	struct nphy_gain_ctl_workaround_entry *e;
 	u8 phy_idx;
-	u8 tr_iso = ghz5 ? dev->dev->bus_sprom->fem.ghz5.tr_iso :
-			   dev->dev->bus_sprom->fem.ghz2.tr_iso;
 
 	if (!ghz5 && dev->phy.rev >= 6 && dev->phy.radio_rev == 11)
 		return &nphy_gain_ctl_wa_phy6_radio11_ghz2;
@@ -3249,6 +3247,10 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
 		    !b43_channel_type_is_40mhz(dev->phy.channel_type))
 			e->cliplo_gain = 0x2d;
 	} else if (!ghz5 && dev->phy.rev >= 5) {
+		static const int gain_data[] = {0x0062, 0x0064, 0x006a, 0x106a,
+						0x106c, 0x1074, 0x107c, 0x207c};
+		u8 tr_iso = dev->dev->bus_sprom->fem.ghz2.tr_iso;
+
 		if (ext_lna) {
 			e->rfseq_init[0] &= ~0x4000;
 			e->rfseq_init[1] &= ~0x4000;
@@ -3256,26 +3258,10 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
 			e->rfseq_init[3] &= ~0x4000;
 			e->init_gain &= ~0x4000;
 		}
-		switch (tr_iso) {
-		case 0:
-			e->cliplo_gain = 0x0062;
-		case 1:
-			e->cliplo_gain = 0x0064;
-		case 2:
-			e->cliplo_gain = 0x006a;
-		case 3:
-			e->cliplo_gain = 0x106a;
-		case 4:
-			e->cliplo_gain = 0x106c;
-		case 5:
-			e->cliplo_gain = 0x1074;
-		case 6:
-			e->cliplo_gain = 0x107c;
-		case 7:
-			e->cliplo_gain = 0x207c;
-		default:
-			e->cliplo_gain = 0x106a;
-		}
+		if (tr_iso > 7)
+			tr_iso = 3;
+		e->cliplo_gain = gain_data[tr_iso];
+
 	} else if (ghz5 && dev->phy.rev == 4 && ext_lna) {
 		e->rfseq_init[0] &= ~0x4000;
 		e->rfseq_init[1] &= ~0x4000;