diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800usb.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800usb.c | 1828 |
1 files changed, 73 insertions, 1755 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 9fe770f..ce2e893 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -34,6 +34,8 @@ #include "rt2x00.h" #include "rt2x00usb.h" +#include "rt2800lib.h" +#include "rt2800.h" #include "rt2800usb.h" /* @@ -44,1027 +46,6 @@ module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); /* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00usb_register_read and rt2x00usb_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - * The _lock versions must be used if you already hold the csr_mutex - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RFCSR(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) -#define WAIT_FOR_MCU(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \ - H2M_MAILBOX_CSR_OWNER, (__reg)) - -static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - - WAIT_FOR_RFCSR(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); - rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev, - const u8 command, const u8 token, - const u8 arg0, const u8 arg1) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the MCU becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_MCU(rt2x00dev, ®)) { - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); - - reg = 0; - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2800usb_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00usb_register_read, - .write = rt2x00usb_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2800usb_bbp_read, - .write = rt2800usb_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2800usb_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); - return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2800usb_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - unsigned int polarity = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_POLARITY); - unsigned int ledmode = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_MODE); - - if (led->type == LED_TYPE_RADIO) { - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? 0x20 : 0); - } else if (led->type == LED_TYPE_ASSOC) { - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * The specs tell us the following levels: - * 0, 1 ,3, 7, 15, 31 - * to determine the level in a simple way we can simply - * work with bitshifting: - * (1 << level) - 1 - */ - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, - (1 << brightness / (LED_FULL / 6)) - 1, - polarity); - } -} - -static int rt2800usb_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00usb_register_read(led->rt2x00dev, LED_CFG, ®); - rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); - rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); - rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); - rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg); - - return 0; -} - -static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2800usb_brightness_set; - led->led_dev.blink_set = rt2800usb_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct mac_wcid_entry wcid_entry; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - u32 reg; - - offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); - - memset(&iveiv_entry, 0, sizeof(iveiv_entry)); - if ((crypto->cipher == CIPHER_TKIP) || - (crypto->cipher == CIPHER_TKIP_NO_MIC) || - (crypto->cipher == CIPHER_AES)) - iveiv_entry.iv[3] |= 0x20; - iveiv_entry.iv[3] |= key->keyidx << 6; - rt2x00usb_register_multiwrite(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - offset = MAC_WCID_ENTRY(key->hw_key_idx); - - memset(&wcid_entry, 0, sizeof(wcid_entry)); - if (crypto->cmd == SET_KEY) - memcpy(&wcid_entry, crypto->address, ETH_ALEN); - rt2x00usb_register_multiwrite(rt2x00dev, offset, - &wcid_entry, sizeof(wcid_entry)); -} - -static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - int timeout; - u32 offset; - u32 reg; - - if (crypto->cmd == SET_KEY) { - key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = SHARED_KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - offset, &key_entry, - sizeof(key_entry), - timeout); - } - - /* - * The cipher types are stored over multiple registers - * starting with SHARED_KEY_MODE_BASE each word will have - * 32 bits and contains the cipher types for 2 bssidx each. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - - offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* - * Update WCID information - */ - rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - int timeout; - u32 offset; - - if (crypto->cmd == SET_KEY) { - /* - * 1 pairwise key is possible per AID, this means that the AID - * equals our hw_key_idx. Make sure the WCID starts _after_ the - * last possible shared key entry. - */ - if (crypto->aid > (256 - 32)) - return -ENOSPC; - - key->hw_key_idx = 32 + crypto->aid; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - offset, &key_entry, - sizeof(key_entry), - timeout); - } - - /* - * Update WCID information - */ - rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, ®); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, - !(filter_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, - !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, - !(filter_flags & FIF_CONTROL)); - rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg); -} - -static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - unsigned int beacon_base; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt2x00usb_register_write(rt2x00dev, beacon_base, 0); - - /* - * Enable synchronisation. - */ - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - - if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - - rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, - conf->mac, sizeof(conf->mac)); - } - - if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); - conf->bssid[1] = cpu_to_le32(reg); - - rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, - conf->bssid, sizeof(conf->bssid)); - } -} - -static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); - rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, - !!erp->short_preamble); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, - !!erp->short_preamble); - rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, - erp->cts_protection ? 2 : 0); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, - erp->basic_rates); - rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); - rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); -} - -static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r1; - u8 r3; - - rt2800usb_bbp_read(rt2x00dev, 1, &r1); - rt2800usb_bbp_read(rt2x00dev, 3, &r3); - - /* - * Configure the TX antenna. - */ - switch ((int)ant->tx) { - case 1: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); - break; - case 3: - /* Do nothing */ - break; - } - - /* - * Configure the RX antenna. - */ - switch ((int)ant->rx) { - case 1: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); - break; - case 3: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); - break; - } - - rt2800usb_bbp_write(rt2x00dev, 3, r3); - rt2800usb_bbp_write(rt2x00dev, 1, r1); -} - -static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain; - - if (libconf->rf.channel <= 14) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); - } else if (libconf->rf.channel <= 64) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); - } else if (libconf->rf.channel <= 128) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); - } else { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - if (rt2x00dev->default_ant.tx == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); - - if (rt2x00dev->default_ant.rx == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - } else if (rt2x00dev->default_ant.rx == 2) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - - if (rf->channel > 14) { - /* - * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minumum value is -7). - * However this means that values between 0 and 7 have - * double meaning, and we should set a 7DBm boost flag. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->tx_power1 >= 0)); - - if (info->tx_power1 < 0) - info->tx_power1 += 7; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power1)); - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->tx_power2 >= 0)); - - if (info->tx_power2 < 0) - info->tx_power2 += 7; - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); - } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); - } - - rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1); - rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3); - - rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); - rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); - rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); - - rt2800usb_rfcsr_write(rt2x00dev, 24, - rt2x00dev->calibration[conf_is_ht40(conf)]); - - rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); -} - -static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u32 reg; - unsigned int tx_pin; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info); - else - rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info); - - /* - * Change BBP settings - */ - rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 86, 0); - - if (rf->channel <= 14) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { - rt2800usb_bbp_write(rt2x00dev, 82, 0x62); - rt2800usb_bbp_write(rt2x00dev, 75, 0x46); - } else { - rt2800usb_bbp_write(rt2x00dev, 82, 0x84); - rt2800usb_bbp_write(rt2x00dev, 75, 0x50); - } - } else { - rt2800usb_bbp_write(rt2x00dev, 82, 0xf2); - - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - rt2800usb_bbp_write(rt2x00dev, 75, 0x46); - else - rt2800usb_bbp_write(rt2x00dev, 75, 0x50); - } - - rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); - rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); - rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg); - - tx_pin = 0; - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.tx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); - } - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.rx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); - } - - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - - rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - rt2800usb_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2800usb_bbp_write(rt2x00dev, 3, bbp); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - if (conf_is_ht40(conf)) { - rt2800usb_bbp_write(rt2x00dev, 69, 0x1a); - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 73, 0x16); - } else { - rt2800usb_bbp_write(rt2x00dev, 69, 0x16); - rt2800usb_bbp_write(rt2x00dev, 70, 0x08); - rt2800usb_bbp_write(rt2x00dev, 73, 0x11); - } - } - - msleep(1); -} - -static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 reg; - u32 value = TXPOWER_G_TO_DEV(txpower); - u8 r1; - - rt2800usb_bbp_read(rt2x00dev, 1, &r1); - rt2x00_set_field8(®, BBP1_TX_POWER, 0); - rt2800usb_bbp_write(rt2x00dev, 1, r1); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, ®); - rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, ®); - rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, ®); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, ®); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, ®); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg); -} - -static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, ®); - rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); - rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg); -} - -static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); - - rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - } else { - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - - rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - } -} - -static void rt2800usb_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt2800usb_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2800usb_config_channel(rt2x00dev, libconf->conf, - &libconf->rf, &libconf->channel); - if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2800usb_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2800usb_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -} - -static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) - return 0x1c + (2 * rt2x00dev->lna_gain); - else - return 0x2e + rt2x00dev->lna_gain; - } - - if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - return 0x32 + (rt2x00dev->lna_gain * 5) / 3; - else - return 0x3a + (rt2x00dev->lna_gain * 5) / 3; -} - -static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - rt2800usb_bbp_write(rt2x00dev, 66, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2800usb_set_vgc(rt2x00dev, qual, - rt2800usb_get_default_vgc(rt2x00dev)); -} - -static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) - return; - - /* - * When RSSI is better then -80 increase VGC level with 0x10 - */ - rt2800usb_set_vgc(rt2x00dev, qual, - rt2800usb_get_default_vgc(rt2x00dev) + - ((qual->rssi > -80) * 0x10)); -} - -/* * Firmware functions */ static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) @@ -1172,7 +153,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, * Wait for stable hardware. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); if (reg && reg != ~0) break; msleep(1); @@ -1192,8 +173,8 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, data + offset, length, REGISTER_TIMEOUT32(length)); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); /* * Send firmware request to device to load firmware, @@ -1208,18 +189,18 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, } msleep(10); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); /* * Send signal to firmware during boot time. */ - rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); if ((chipset == 0x3070) || (chipset == 0x3071) || (chipset == 0x3572)) { udelay(200); - rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); udelay(10); } @@ -1227,7 +208,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, * Wait for device to stabilize. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) break; msleep(1); @@ -1241,536 +222,14 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, /* * Initialize firmware. */ - rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); msleep(1); return 0; } /* - * Initialization functions. - */ -static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - /* - * Wait untill BBP and RF are ready. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - break; - msleep(1); - } - - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "Unstable hardware.\n"); - return -EBUSY; - } - - rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); - rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); - - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, - USB_MODE_RESET, REGISTER_TIMEOUT); - - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, ®); - rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ - rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg); - - rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, ®); - rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ - rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg); - - rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); - rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - } else { - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - } - - rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); - rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); - rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); - rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®); - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); - if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && - rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); - else - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); - rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); - - rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); - rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006); - - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); - rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); - - rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, - IEEE80211_MAX_RTS_THRESHOLD); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); - rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); - rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); - - /* - * ASIC will keep garbage value after boot, clear encryption keys. - */ - for (i = 0; i < 4; i++) - rt2x00usb_register_write(rt2x00dev, - SHARED_KEY_MODE_ENTRY(i), 0); - - for (i = 0; i < 256; i++) { - u32 wcid[2] = { 0xffffffff, 0x00ffffff }; - rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), - wcid, sizeof(wcid)); - - rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); - rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); - } - - /* - * Clear all beacons - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0); - - rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, ®); - rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30); - rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, ®); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); - rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg); - - rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, ®); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); - rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg); - - rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); - rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg); - - rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); - rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, ®); - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, ®); - - return 0; -} - -static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, ®); - if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) - return 0; - - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); - return -EACCES; -} - -static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - /* - * BBP was enabled after firmware was loaded, - * but we need to reactivate it now. - */ - rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - msleep(1); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800usb_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; -} - -static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) || - rt2800usb_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt2800usb_bbp_write(rt2x00dev, 65, 0x2c); - rt2800usb_bbp_write(rt2x00dev, 66, 0x38); - rt2800usb_bbp_write(rt2x00dev, 69, 0x12); - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 73, 0x10); - rt2800usb_bbp_write(rt2x00dev, 81, 0x37); - rt2800usb_bbp_write(rt2x00dev, 82, 0x62); - rt2800usb_bbp_write(rt2x00dev, 83, 0x6a); - rt2800usb_bbp_write(rt2x00dev, 84, 0x99); - rt2800usb_bbp_write(rt2x00dev, 86, 0x00); - rt2800usb_bbp_write(rt2x00dev, 91, 0x04); - rt2800usb_bbp_write(rt2x00dev, 92, 0x00); - rt2800usb_bbp_write(rt2x00dev, 103, 0x00); - rt2800usb_bbp_write(rt2x00dev, 105, 0x05); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 69, 0x16); - rt2800usb_bbp_write(rt2x00dev, 73, 0x12); - } - - if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 84, 0x19); - } - - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 84, 0x99); - rt2800usb_bbp_write(rt2x00dev, 105, 0x05); - } - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2800usb_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev, - bool bw40, u8 rfcsr24, u8 filter_target) -{ - unsigned int i; - u8 bbp; - u8 rfcsr; - u8 passband; - u8 stopband; - u8 overtuned = 0; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); - rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * Set power & frequency of passband test tone - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0); - - for (i = 0; i < 100; i++) { - rt2800usb_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800usb_bbp_read(rt2x00dev, 55, &passband); - if (passband) - break; - } - - /* - * Set power & frequency of stopband test tone - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0x06); - - for (i = 0; i < 100; i++) { - rt2800usb_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800usb_bbp_read(rt2x00dev, 55, &stopband); - - if ((passband - stopband) <= filter_target) { - rfcsr24++; - overtuned += ((passband - stopband) == filter_target); - } else - break; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - } - - rfcsr24 -= !!overtuned; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - return rfcsr24; -} - -static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev) -{ - u8 rfcsr; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - return 0; - - /* - * Init RF calibration. - */ - rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); - rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); - msleep(1); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); - rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); - - rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70); - rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71); - rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b); - rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03); - rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f); - - /* - * Set RX Filter calibration for 20MHz and 40MHz - */ - rt2x00dev->calibration[0] = - rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16); - rt2x00dev->calibration[1] = - rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19); - - /* - * Set back to initial state - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0); - - rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); - rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * set BBP back to BW20 - */ - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - return 0; -} - -/* * Device state switch handlers. */ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, @@ -1778,11 +237,11 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, (state == STATE_RADIO_RX_ON) || (state == STATE_RADIO_RX_ON_LINK)); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); } static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) @@ -1791,7 +250,7 @@ static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) u32 reg; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) return 0; @@ -1812,25 +271,25 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) * Initialize all registers. */ if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) || - rt2800usb_init_registers(rt2x00dev) || - rt2800usb_init_bbp(rt2x00dev) || - rt2800usb_init_rfcsr(rt2x00dev))) + rt2800_init_registers(rt2x00dev) || + rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) return -EIO; - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); udelay(50); - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®); + rt2800_register_read(rt2x00dev, USB_DMA_CFG, ®); rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); /* Don't use bulk in aggregation when working with USB 1.1 */ rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, @@ -1844,26 +303,26 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3); rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1); rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); - rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg); + rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg); - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); /* * Initialize LED control */ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, word & 0xff, (word >> 8) & 0xff); rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, word & 0xff, (word >> 8) & 0xff); rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, word & 0xff, (word >> 8) & 0xff); return 0; @@ -1873,14 +332,14 @@ static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0); - rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); /* Wait for DMA, ignore error */ rt2800usb_wait_wpdma_ready(rt2x00dev); @@ -1892,9 +351,9 @@ static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { if (state == STATE_AWAKE) - rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); else - rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); return 0; } @@ -2048,9 +507,9 @@ static void rt2800usb_write_beacon(struct queue_entry *entry) * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); /* * Write entire beacon with descriptor to register. @@ -2093,12 +552,12 @@ static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, return; } - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); } } @@ -2124,7 +583,7 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ memcpy(skbdesc->desc, rxd, skbdesc->desc_len); rxd = (__le32 *)skbdesc->desc; - rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)]; + rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)]; /* * It is now safe to read the descriptor on all architectures. @@ -2326,7 +785,7 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) * Identify RF chipset. */ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2870, value, reg); /* @@ -2385,9 +844,9 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) * Store led settings, for correct led behaviour. */ #ifdef CONFIG_RT2X00_LIB_LEDS - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); @@ -2600,10 +1059,25 @@ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) return 0; } +static const struct rt2800_ops rt2800usb_rt2800_ops = { + .register_read = rt2x00usb_register_read, + .register_write = rt2x00usb_register_write, + .register_write_lock = rt2x00usb_register_write_lock, + + .register_multiread = rt2x00usb_register_multiread, + .register_multiwrite = rt2x00usb_register_multiwrite, + + .regbusy_read = rt2x00usb_regbusy_read, +}; + static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB); + + rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops; + /* * Allocate eeprom data. */ @@ -2645,162 +1119,6 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) return 0; } -/* - * IEEE80211 stack callback functions. - */ -static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, - u32 *iv32, u16 *iv16) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - - offset = MAC_IVEIV_ENTRY(hw_key_idx); - rt2x00usb_register_multiread(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); - memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); -} - -static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); - - rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); - rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - return 0; -} - -static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - struct rt2x00_field32 field; - int retval; - u32 reg; - u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will - * update the queue settings and validate the input. After that - * we are free to update the registers based on the value - * in the queue parameter. - */ - retval = rt2x00mac_conf_tx(hw, queue_idx, params); - if (retval) - return retval; - - /* - * We only need to perform additional register initialization - * for WMM queues/ - */ - if (queue_idx >= 4) - return 0; - - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ - offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); - field.bit_offset = (queue_idx & 1) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; - field.bit_mask = 0xf << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); - rt2x00_set_field32(®, field, queue->aifs); - rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_min); - rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_max); - rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); - - /* Update EDCA registers */ - offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); - rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - return 0; -} - -static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, ®); - tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; - rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, ®); - tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); - - return tsf; -} - -static const struct ieee80211_ops rt2800usb_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_tim = rt2x00mac_set_tim, - .set_key = rt2x00mac_set_key, - .get_stats = rt2x00mac_get_stats, - .get_tkip_seq = rt2800usb_get_tkip_seq, - .set_rts_threshold = rt2800usb_set_rts_threshold, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2800usb_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .get_tsf = rt2800usb_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, -}; - static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .probe_hw = rt2800usb_probe_hw, .get_firmware_name = rt2800usb_get_firmware_name, @@ -2810,10 +1128,10 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .uninitialize = rt2x00usb_uninitialize, .clear_entry = rt2x00usb_clear_entry, .set_device_state = rt2800usb_set_device_state, - .rfkill_poll = rt2800usb_rfkill_poll, - .link_stats = rt2800usb_link_stats, - .reset_tuner = rt2800usb_reset_tuner, - .link_tuner = rt2800usb_link_tuner, + .rfkill_poll = rt2800_rfkill_poll, + .link_stats = rt2800_link_stats, + .reset_tuner = rt2800_reset_tuner, + .link_tuner = rt2800_link_tuner, .write_tx_desc = rt2800usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, .write_beacon = rt2800usb_write_beacon, @@ -2821,19 +1139,19 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .kick_tx_queue = rt2800usb_kick_tx_queue, .kill_tx_queue = rt2x00usb_kill_tx_queue, .fill_rxdone = rt2800usb_fill_rxdone, - .config_shared_key = rt2800usb_config_shared_key, - .config_pairwise_key = rt2800usb_config_pairwise_key, - .config_filter = rt2800usb_config_filter, - .config_intf = rt2800usb_config_intf, - .config_erp = rt2800usb_config_erp, - .config_ant = rt2800usb_config_ant, - .config = rt2800usb_config, + .config_shared_key = rt2800_config_shared_key, + .config_pairwise_key = rt2800_config_pairwise_key, + .config_filter = rt2800_config_filter, + .config_intf = rt2800_config_intf, + .config_erp = rt2800_config_erp, + .config_ant = rt2800_config_ant, + .config = rt2800_config, }; static const struct data_queue_desc rt2800usb_queue_rx = { .entry_num = RX_ENTRIES, .data_size = AGGREGATION_SIZE, - .desc_size = RXD_DESC_SIZE + RXWI_DESC_SIZE, + .desc_size = RXINFO_DESC_SIZE + RXWI_DESC_SIZE, .priv_size = sizeof(struct queue_entry_priv_usb), }; @@ -2862,9 +1180,9 @@ static const struct rt2x00_ops rt2800usb_ops = { .tx = &rt2800usb_queue_tx, .bcn = &rt2800usb_queue_bcn, .lib = &rt2800usb_rt2x00_ops, - .hw = &rt2800usb_mac80211_ops, + .hw = &rt2800_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800usb_rt2x00debug, + .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; |