diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/b43/nphy.c | 292 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/nphy.h | 52 |
2 files changed, 320 insertions, 24 deletions
diff --git a/drivers/net/wireless/b43/nphy.c b/drivers/net/wireless/b43/nphy.c index 0b421b1..705131e 100644 --- a/drivers/net/wireless/b43/nphy.c +++ b/drivers/net/wireless/b43/nphy.c @@ -29,6 +29,8 @@ #include "nphy.h" #include "tables_nphy.h" +#include <linux/delay.h> + void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna) {//TODO @@ -191,9 +193,297 @@ void b43_nphy_radio_turn_off(struct b43_wldev *dev) ~B43_NPHY_RFCTL_CMD_EN); } +#define ntab_upload(dev, offset, data) do { \ + unsigned int i; \ + for (i = 0; i < (offset##_SIZE); i++) \ + b43_ntab_write(dev, (offset) + i, (data)[i]); \ + } while (0) + +/* Upload the N-PHY tables. */ +static void b43_nphy_tables_init(struct b43_wldev *dev) +{ + /* Static tables */ + ntab_upload(dev, B43_NTAB_FRAMESTRUCT, b43_ntab_framestruct); + ntab_upload(dev, B43_NTAB_FRAMELT, b43_ntab_framelookup); + ntab_upload(dev, B43_NTAB_TMAP, b43_ntab_tmap); + ntab_upload(dev, B43_NTAB_TDTRN, b43_ntab_tdtrn); + ntab_upload(dev, B43_NTAB_INTLEVEL, b43_ntab_intlevel); + ntab_upload(dev, B43_NTAB_PILOT, b43_ntab_pilot); + ntab_upload(dev, B43_NTAB_PILOTLT, b43_ntab_pilotlt); + ntab_upload(dev, B43_NTAB_TDI20A0, b43_ntab_tdi20a0); + ntab_upload(dev, B43_NTAB_TDI20A1, b43_ntab_tdi20a1); + ntab_upload(dev, B43_NTAB_TDI40A0, b43_ntab_tdi40a0); + ntab_upload(dev, B43_NTAB_TDI40A1, b43_ntab_tdi40a1); + ntab_upload(dev, B43_NTAB_BDI, b43_ntab_bdi); + ntab_upload(dev, B43_NTAB_CHANEST, b43_ntab_channelest); + ntab_upload(dev, B43_NTAB_MCS, b43_ntab_mcs); + + /* Volatile tables */ + ntab_upload(dev, B43_NTAB_NOISEVAR10, b43_ntab_noisevar10); + ntab_upload(dev, B43_NTAB_NOISEVAR11, b43_ntab_noisevar11); + ntab_upload(dev, B43_NTAB_C0_ESTPLT, b43_ntab_estimatepowerlt0); + ntab_upload(dev, B43_NTAB_C1_ESTPLT, b43_ntab_estimatepowerlt1); + ntab_upload(dev, B43_NTAB_C0_ADJPLT, b43_ntab_adjustpower0); + ntab_upload(dev, B43_NTAB_C1_ADJPLT, b43_ntab_adjustpower1); + ntab_upload(dev, B43_NTAB_C0_GAINCTL, b43_ntab_gainctl0); + ntab_upload(dev, B43_NTAB_C1_GAINCTL, b43_ntab_gainctl1); + ntab_upload(dev, B43_NTAB_C0_IQLT, b43_ntab_iqlt0); + ntab_upload(dev, B43_NTAB_C1_IQLT, b43_ntab_iqlt1); + ntab_upload(dev, B43_NTAB_C0_LOFEEDTH, b43_ntab_loftlt0); + ntab_upload(dev, B43_NTAB_C1_LOFEEDTH, b43_ntab_loftlt1); +} + +static void b43_nphy_workarounds(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + unsigned int i; + + b43_phy_set(dev, B43_NPHY_IQFLIP, + B43_NPHY_IQFLIP_ADC1 | B43_NPHY_IQFLIP_ADC2); + //FIXME the following condition is different in the specs. + if (1 /* FIXME band is 2.4GHz */) { + b43_phy_set(dev, B43_NPHY_CLASSCTL, + B43_NPHY_CLASSCTL_CCKEN); + } else { + b43_phy_mask(dev, B43_NPHY_CLASSCTL, + ~B43_NPHY_CLASSCTL_CCKEN); + } + b43_radio_set(dev, B2055_C1_TX_RF_SPARE, 0x8); + b43_phy_write(dev, B43_NPHY_TXFRAMEDELAY, 8); + + /* Fixup some tables */ + b43_ntab_write(dev, B43_NTAB16(8, 0x00), 0xA); + b43_ntab_write(dev, B43_NTAB16(8, 0x10), 0xA); + b43_ntab_write(dev, B43_NTAB16(8, 0x02), 0xCDAA); + b43_ntab_write(dev, B43_NTAB16(8, 0x12), 0xCDAA); + b43_ntab_write(dev, B43_NTAB16(8, 0x08), 0); + b43_ntab_write(dev, B43_NTAB16(8, 0x18), 0); + b43_ntab_write(dev, B43_NTAB16(8, 0x07), 0x7AAB); + b43_ntab_write(dev, B43_NTAB16(8, 0x17), 0x7AAB); + b43_ntab_write(dev, B43_NTAB16(8, 0x06), 0x800); + b43_ntab_write(dev, B43_NTAB16(8, 0x16), 0x800); + + b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8); + b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301); + b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8); + b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301); + + //TODO set RF sequence + + /* Set narrowband clip threshold */ + b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 66); + b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 66); + + /* Set wideband clip 2 threshold */ + b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES, + ~B43_NPHY_C1_CLIPWBTHRES_CLIP2, + 21 << B43_NPHY_C1_CLIPWBTHRES_CLIP2_SHIFT); + b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES, + ~B43_NPHY_C2_CLIPWBTHRES_CLIP2, + 21 << B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT); + + /* Set Clip 2 detect */ + b43_phy_set(dev, B43_NPHY_C1_CGAINI, + B43_NPHY_C1_CGAINI_CL2DETECT); + b43_phy_set(dev, B43_NPHY_C2_CGAINI, + B43_NPHY_C2_CGAINI_CL2DETECT); + + if (0 /*FIXME*/) { + /* Set dwell lengths */ + b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 43); + b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 43); + b43_phy_write(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 9); + b43_phy_write(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 9); + + /* Set gain backoff */ + b43_phy_maskset(dev, B43_NPHY_C1_CGAINI, + ~B43_NPHY_C1_CGAINI_GAINBKOFF, + 1 << B43_NPHY_C1_CGAINI_GAINBKOFF_SHIFT); + b43_phy_maskset(dev, B43_NPHY_C2_CGAINI, + ~B43_NPHY_C2_CGAINI_GAINBKOFF, + 1 << B43_NPHY_C2_CGAINI_GAINBKOFF_SHIFT); + + /* Set HPVGA2 index */ + b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN, + ~B43_NPHY_C1_INITGAIN_HPVGA2, + 6 << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT); + b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN, + ~B43_NPHY_C2_INITGAIN_HPVGA2, + 6 << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT); + + //FIXME verify that the specs really mean to use autoinc here. + for (i = 0; i < 3; i++) + b43_ntab_write(dev, B43_NTAB16(7, 0x106) + i, 0x673); + } + + /* Set minimum gain value */ + b43_phy_maskset(dev, B43_NPHY_C1_MINMAX_GAIN, + ~B43_NPHY_C1_MINGAIN, + 23 << B43_NPHY_C1_MINGAIN_SHIFT); + b43_phy_maskset(dev, B43_NPHY_C2_MINMAX_GAIN, + ~B43_NPHY_C2_MINGAIN, + 23 << B43_NPHY_C2_MINGAIN_SHIFT); + + if (phy->rev < 2) { + b43_phy_mask(dev, B43_NPHY_SCRAM_SIGCTL, + ~B43_NPHY_SCRAM_SIGCTL_SCM); + } + + /* Set phase track alpha and beta */ + b43_phy_write(dev, B43_NPHY_PHASETR_A0, 0x125); + b43_phy_write(dev, B43_NPHY_PHASETR_A1, 0x1B3); + b43_phy_write(dev, B43_NPHY_PHASETR_A2, 0x105); + b43_phy_write(dev, B43_NPHY_PHASETR_B0, 0x16E); + b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0xCD); + b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x20); +} + +static void b43_nphy_reset_cca(struct b43_wldev *dev) +{ + u16 bbcfg; + + ssb_write32(dev->dev, SSB_TMSLOW, + ssb_read32(dev->dev, SSB_TMSLOW) | SSB_TMSLOW_FGC); + bbcfg = b43_phy_read(dev, B43_NPHY_BBCFG); + b43_phy_set(dev, B43_NPHY_BBCFG, B43_NPHY_BBCFG_RSTCCA); + b43_phy_write(dev, B43_NPHY_BBCFG, + bbcfg & ~B43_NPHY_BBCFG_RSTCCA); + ssb_write32(dev->dev, SSB_TMSLOW, + ssb_read32(dev->dev, SSB_TMSLOW) & ~SSB_TMSLOW_FGC); +} + +enum b43_nphy_rf_sequence { + B43_RFSEQ_RX2TX, + B43_RFSEQ_TX2RX, + B43_RFSEQ_RESET2RX, + B43_RFSEQ_UPDATE_GAINH, + B43_RFSEQ_UPDATE_GAINL, + B43_RFSEQ_UPDATE_GAINU, +}; + +static void b43_nphy_force_rf_sequence(struct b43_wldev *dev, + enum b43_nphy_rf_sequence seq) +{ + static const u16 trigger[] = { + [B43_RFSEQ_RX2TX] = B43_NPHY_RFSEQTR_RX2TX, + [B43_RFSEQ_TX2RX] = B43_NPHY_RFSEQTR_TX2RX, + [B43_RFSEQ_RESET2RX] = B43_NPHY_RFSEQTR_RST2RX, + [B43_RFSEQ_UPDATE_GAINH] = B43_NPHY_RFSEQTR_UPGH, + [B43_RFSEQ_UPDATE_GAINL] = B43_NPHY_RFSEQTR_UPGL, + [B43_RFSEQ_UPDATE_GAINU] = B43_NPHY_RFSEQTR_UPGU, + }; + int i; + + B43_WARN_ON(seq >= ARRAY_SIZE(trigger)); + + b43_phy_set(dev, B43_NPHY_RFSEQMODE, + B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER); + b43_phy_set(dev, B43_NPHY_RFSEQTR, trigger[seq]); + for (i = 0; i < 200; i++) { + if (!(b43_phy_read(dev, B43_NPHY_RFSEQST) & trigger[seq])) + goto ok; + msleep(1); + } + b43err(dev->wl, "RF sequence status timeout\n"); +ok: + b43_phy_mask(dev, B43_NPHY_RFSEQMODE, + ~(B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER)); +} + +static void b43_nphy_bphy_init(struct b43_wldev *dev) +{ + unsigned int i; + u16 val; + + val = 0x1E1F; + for (i = 0; i < 14; i++) { + b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val); + val -= 0x202; + } + val = 0x3E3F; + for (i = 0; i < 16; i++) { + b43_phy_write(dev, B43_PHY_N_BMODE(0x97 + i), val); + val -= 0x202; + } + b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668); +} + +/* RSSI Calibration */ +static void b43_nphy_rssi_cal(struct b43_wldev *dev, u8 type) +{ + //TODO +} + int b43_phy_initn(struct b43_wldev *dev) { - b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n"); + struct b43_phy *phy = &dev->phy; + u16 tmp; + + //TODO: Spectral management + b43_nphy_tables_init(dev); + + /* Clear all overrides */ + b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0); + b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, 0); + b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, 0); + b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0); + b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0); + b43_phy_mask(dev, B43_NPHY_RFSEQMODE, + ~(B43_NPHY_RFSEQMODE_CAOVER | + B43_NPHY_RFSEQMODE_TROVER)); + b43_phy_write(dev, B43_NPHY_AFECTL_OVER, 0); + + tmp = (phy->rev < 2) ? 64 : 59; + b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, + ~B43_NPHY_BPHY_CTL3_SCALE, + tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT); + + b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20); + b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20); + + b43_phy_write(dev, B43_NPHY_TXREALFD, 184); + b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 200); + b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 80); + b43_phy_write(dev, B43_NPHY_C2_BCLIPBKOFF, 511); + //TODO MIMO-Config + //TODO Update TX/RX chain + + if (phy->rev < 2) { + b43_phy_write(dev, B43_NPHY_DUP40_GFBL, 0xAA8); + b43_phy_write(dev, B43_NPHY_DUP40_BL, 0x9A4); + } + b43_nphy_workarounds(dev); + b43_nphy_reset_cca(dev); + + ssb_write32(dev->dev, SSB_TMSLOW, + ssb_read32(dev->dev, SSB_TMSLOW) | B43_TMSLOW_MACPHYCLKEN); + b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX); + b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX); + + b43_phy_read(dev, B43_NPHY_CLASSCTL); /* dummy read */ + //TODO read core1/2 clip1 thres regs + + if (1 /* FIXME Band is 2.4GHz */) + b43_nphy_bphy_init(dev); + //TODO disable TX power control + //TODO Fix the TX power settings + //TODO Init periodic calibration with reason 3 + b43_nphy_rssi_cal(dev, 2); + b43_nphy_rssi_cal(dev, 0); + b43_nphy_rssi_cal(dev, 1); + //TODO get TX gain + //TODO init superswitch + //TODO calibrate LO + //TODO idle TSSI TX pctl + //TODO TX power control power setup + //TODO table writes + //TODO TX power control coefficients + //TODO enable TX power control + //TODO control antenna selection + //TODO init radar detection + //TODO reset channel if changed + + b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n"); return 0; } diff --git a/drivers/net/wireless/b43/nphy.h b/drivers/net/wireless/b43/nphy.h index 896b468..5d95118 100644 --- a/drivers/net/wireless/b43/nphy.h +++ b/drivers/net/wireless/b43/nphy.h @@ -25,8 +25,11 @@ #define B43_NPHY_C1_CCK_BCLIPBKOFF B43_PHY_N(0x01B) /* Core 1 CCK barely clip backoff */ #define B43_NPHY_C1_CGAINI B43_PHY_N(0x01C) /* Core 1 compute gain info */ #define B43_NPHY_C1_CGAINI_GAINBKOFF 0x001F /* Gain backoff */ +#define B43_NPHY_C1_CGAINI_GAINBKOFF_SHIFT 0 #define B43_NPHY_C1_CGAINI_CLIPGBKOFF 0x03E0 /* Clip gain backoff */ +#define B43_NPHY_C1_CGAINI_CLIPGBKOFF_SHIFT 5 #define B43_NPHY_C1_CGAINI_GAINSTEP 0x1C00 /* Gain step */ +#define B43_NPHY_C1_CGAINI_GAINSTEP_SHIFT 10 #define B43_NPHY_C1_CGAINI_CL2DETECT 0x2000 /* Clip 2 detect mask */ #define B43_NPHY_C1_CCK_CGAINI B43_PHY_N(0x01D) /* Core 1 CCK compute gain info */ #define B43_NPHY_C1_CCK_CGAINI_GAINBKOFF 0x001F /* Gain backoff */ @@ -69,29 +72,32 @@ #define B43_NPHY_C1_CLIP1THRES B43_PHY_N(0x02C) /* Core 1 clip1 threshold */ #define B43_NPHY_C1_CLIP2THRES B43_PHY_N(0x02D) /* Core 1 clip2 threshold */ -#define B43_NPHY_C2_DESPWR B43_PHY_N(0x018 + 22) /* Core 2 desired power */ -#define B43_NPHY_C2_CCK_DESPWR B43_PHY_N(0x019 + 22) /* Core 2 CCK desired power */ -#define B43_NPHY_C2_BCLIPBKOFF B43_PHY_N(0x01A + 22) /* Core 2 barely clip backoff */ -#define B43_NPHY_C2_CCK_BCLIPBKOFF B43_PHY_N(0x01B + 22) /* Core 2 CCK barely clip backoff */ -#define B43_NPHY_C2_CGAINI B43_PHY_N(0x01C + 22) /* Core 2 compute gain info */ +#define B43_NPHY_C2_DESPWR B43_PHY_N(0x02E) /* Core 2 desired power */ +#define B43_NPHY_C2_CCK_DESPWR B43_PHY_N(0x02F) /* Core 2 CCK desired power */ +#define B43_NPHY_C2_BCLIPBKOFF B43_PHY_N(0x030) /* Core 2 barely clip backoff */ +#define B43_NPHY_C2_CCK_BCLIPBKOFF B43_PHY_N(0x031) /* Core 2 CCK barely clip backoff */ +#define B43_NPHY_C2_CGAINI B43_PHY_N(0x032) /* Core 2 compute gain info */ #define B43_NPHY_C2_CGAINI_GAINBKOFF 0x001F /* Gain backoff */ +#define B43_NPHY_C2_CGAINI_GAINBKOFF_SHIFT 0 #define B43_NPHY_C2_CGAINI_CLIPGBKOFF 0x03E0 /* Clip gain backoff */ +#define B43_NPHY_C2_CGAINI_CLIPGBKOFF_SHIFT 5 #define B43_NPHY_C2_CGAINI_GAINSTEP 0x1C00 /* Gain step */ +#define B43_NPHY_C2_CGAINI_GAINSTEP_SHIFT 10 #define B43_NPHY_C2_CGAINI_CL2DETECT 0x2000 /* Clip 2 detect mask */ -#define B43_NPHY_C2_CCK_CGAINI B43_PHY_N(0x01D + 22) /* Core 2 CCK compute gain info */ +#define B43_NPHY_C2_CCK_CGAINI B43_PHY_N(0x033) /* Core 2 CCK compute gain info */ #define B43_NPHY_C2_CCK_CGAINI_GAINBKOFF 0x001F /* Gain backoff */ #define B43_NPHY_C2_CCK_CGAINI_CLIPGBKOFF 0x01E0 /* CCK barely clip gain backoff */ -#define B43_NPHY_C2_MINMAX_GAIN B43_PHY_N(0x01E + 22) /* Core 2 min/max gain */ +#define B43_NPHY_C2_MINMAX_GAIN B43_PHY_N(0x034) /* Core 2 min/max gain */ #define B43_NPHY_C2_MINGAIN 0x00FF /* Minimum gain */ #define B43_NPHY_C2_MINGAIN_SHIFT 0 #define B43_NPHY_C2_MAXGAIN 0xFF00 /* Maximum gain */ #define B43_NPHY_C2_MAXGAIN_SHIFT 8 -#define B43_NPHY_C2_CCK_MINMAX_GAIN B43_PHY_N(0x01F + 22) /* Core 2 CCK min/max gain */ +#define B43_NPHY_C2_CCK_MINMAX_GAIN B43_PHY_N(0x035) /* Core 2 CCK min/max gain */ #define B43_NPHY_C2_CCK_MINGAIN 0x00FF /* Minimum gain */ #define B43_NPHY_C2_CCK_MINGAIN_SHIFT 0 #define B43_NPHY_C2_CCK_MAXGAIN 0xFF00 /* Maximum gain */ #define B43_NPHY_C2_CCK_MAXGAIN_SHIFT 8 -#define B43_NPHY_C2_INITGAIN B43_PHY_N(0x020 + 22) /* Core 2 initial gain code */ +#define B43_NPHY_C2_INITGAIN B43_PHY_N(0x036) /* Core 2 initial gain code */ #define B43_NPHY_C2_INITGAIN_EXTLNA 0x0001 /* External LNA index */ #define B43_NPHY_C2_INITGAIN_LNA 0x0006 /* LNA index */ #define B43_NPHY_C2_INITGAIN_LNAIDX_SHIFT 1 @@ -101,23 +107,23 @@ #define B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT 7 #define B43_NPHY_C2_INITGAIN_TRRX 0x1000 /* TR RX index */ #define B43_NPHY_C2_INITGAIN_TRTX 0x2000 /* TR TX index */ -#define B43_NPHY_C2_CLIP1_HIGAIN B43_PHY_N(0x021 + 22) /* Core 2 clip1 high gain code */ -#define B43_NPHY_C2_CLIP1_MEDGAIN B43_PHY_N(0x022 + 22) /* Core 2 clip1 medium gain code */ -#define B43_NPHY_C2_CLIP1_LOGAIN B43_PHY_N(0x023 + 22) /* Core 2 clip1 low gain code */ -#define B43_NPHY_C2_CLIP2_GAIN B43_PHY_N(0x024 + 22) /* Core 2 clip2 gain code */ -#define B43_NPHY_C2_FILTERGAIN B43_PHY_N(0x025 + 22) /* Core 2 filter gain */ -#define B43_NPHY_C2_LPF_QHPF_BW B43_PHY_N(0x026 + 22) /* Core 2 LPF Q HP F bandwidth */ -#define B43_NPHY_C2_CLIPWBTHRES B43_PHY_N(0x027 + 22) /* Core 2 clip wideband threshold */ +#define B43_NPHY_C2_CLIP1_HIGAIN B43_PHY_N(0x037) /* Core 2 clip1 high gain code */ +#define B43_NPHY_C2_CLIP1_MEDGAIN B43_PHY_N(0x038) /* Core 2 clip1 medium gain code */ +#define B43_NPHY_C2_CLIP1_LOGAIN B43_PHY_N(0x039) /* Core 2 clip1 low gain code */ +#define B43_NPHY_C2_CLIP2_GAIN B43_PHY_N(0x03A) /* Core 2 clip2 gain code */ +#define B43_NPHY_C2_FILTERGAIN B43_PHY_N(0x03B) /* Core 2 filter gain */ +#define B43_NPHY_C2_LPF_QHPF_BW B43_PHY_N(0x03C) /* Core 2 LPF Q HP F bandwidth */ +#define B43_NPHY_C2_CLIPWBTHRES B43_PHY_N(0x03D) /* Core 2 clip wideband threshold */ #define B43_NPHY_C2_CLIPWBTHRES_CLIP2 0x003F /* Clip 2 */ #define B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT 0 #define B43_NPHY_C2_CLIPWBTHRES_CLIP1 0x0FC0 /* Clip 1 */ #define B43_NPHY_C2_CLIPWBTHRES_CLIP1_SHIFT 6 -#define B43_NPHY_C2_W1THRES B43_PHY_N(0x028 + 22) /* Core 2 W1 threshold */ -#define B43_NPHY_C2_EDTHRES B43_PHY_N(0x029 + 22) /* Core 2 ED threshold */ -#define B43_NPHY_C2_SMSIGTHRES B43_PHY_N(0x02A + 22) /* Core 2 small sig threshold */ -#define B43_NPHY_C2_NBCLIPTHRES B43_PHY_N(0x02B + 22) /* Core 2 NB clip threshold */ -#define B43_NPHY_C2_CLIP1THRES B43_PHY_N(0x02C + 22) /* Core 2 clip1 threshold */ -#define B43_NPHY_C2_CLIP2THRES B43_PHY_N(0x02D + 22) /* Core 2 clip2 threshold */ +#define B43_NPHY_C2_W1THRES B43_PHY_N(0x03E) /* Core 2 W1 threshold */ +#define B43_NPHY_C2_EDTHRES B43_PHY_N(0x03F) /* Core 2 ED threshold */ +#define B43_NPHY_C2_SMSIGTHRES B43_PHY_N(0x040) /* Core 2 small sig threshold */ +#define B43_NPHY_C2_NBCLIPTHRES B43_PHY_N(0x041) /* Core 2 NB clip threshold */ +#define B43_NPHY_C2_CLIP1THRES B43_PHY_N(0x042) /* Core 2 clip1 threshold */ +#define B43_NPHY_C2_CLIP2THRES B43_PHY_N(0x043) /* Core 2 clip2 threshold */ #define B43_NPHY_CRS_THRES1 B43_PHY_N(0x044) /* CRS threshold 1 */ #define B43_NPHY_CRS_THRES2 B43_PHY_N(0x045) /* CRS threshold 2 */ @@ -225,7 +231,7 @@ #define B43_NPHY_C2_TXIQ_COMP_OFF B43_PHY_N(0x088) /* Core 2 TX I/Q comp offset */ #define B43_NPHY_C1_TXCTL B43_PHY_N(0x08B) /* Core 1 TX control */ #define B43_NPHY_C2_TXCTL B43_PHY_N(0x08C) /* Core 2 TX control */ -#define B43_NPHY_SCRAM_SIGCTL B43_PHY_N(0x090) /* Scran signal control */ +#define B43_NPHY_SCRAM_SIGCTL B43_PHY_N(0x090) /* Scram signal control */ #define B43_NPHY_SCRAM_SIGCTL_INITST 0x007F /* Initial state value */ #define B43_NPHY_SCRAM_SIGCTL_INITST_SHIFT 0 #define B43_NPHY_SCRAM_SIGCTL_SCM 0x0080 /* Scram control mode */ |