summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/igb/e1000_82575.c3
-rw-r--r--drivers/net/igb/e1000_hw.h3
-rw-r--r--drivers/net/igb/e1000_mac.c37
-rw-r--r--drivers/net/igb/igb_ethtool.c25
-rw-r--r--drivers/net/igb/igb_main.c12
5 files changed, 22 insertions, 58 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index ac28dd5..bd3efdb 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -867,8 +867,7 @@ void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw)
u32 reg;
if (hw->mac.type != e1000_82576 ||
- (hw->phy.media_type != e1000_media_type_fiber &&
- hw->phy.media_type != e1000_media_type_internal_serdes))
+ hw->phy.media_type != e1000_media_type_internal_serdes)
return;
/* if the management interface is not enabled, then power down */
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index 68aac20..f096ddd 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -61,8 +61,7 @@ enum e1000_mac_type {
enum e1000_media_type {
e1000_media_type_unknown = 0,
e1000_media_type_copper = 1,
- e1000_media_type_fiber = 2,
- e1000_media_type_internal_serdes = 3,
+ e1000_media_type_internal_serdes = 2,
e1000_num_media_types
};
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 472f3f1..37706d9 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -713,8 +713,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
* configuration of the MAC to match the "fc" parameter.
*/
if (mac->autoneg_failed) {
- if (hw->phy.media_type == e1000_media_type_fiber ||
- hw->phy.media_type == e1000_media_type_internal_serdes)
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
ret_val = igb_force_mac_fc(hw);
} else {
if (hw->phy.media_type == e1000_media_type_copper)
@@ -1161,22 +1160,16 @@ s32 igb_blink_led(struct e1000_hw *hw)
u32 ledctl_blink = 0;
u32 i;
- if (hw->phy.media_type == e1000_media_type_fiber) {
- /* always blink LED0 for PCI-E fiber */
- ledctl_blink = E1000_LEDCTL_LED0_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
- } else {
- /*
- * set the blink bit for each LED that's "on" (0x0E)
- * in ledctl_mode2
- */
- ledctl_blink = hw->mac.ledctl_mode2;
- for (i = 0; i < 4; i++)
- if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
- E1000_LEDCTL_MODE_LED_ON)
- ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
- (i * 8));
- }
+ /*
+ * set the blink bit for each LED that's "on" (0x0E)
+ * in ledctl_mode2
+ */
+ ledctl_blink = hw->mac.ledctl_mode2;
+ for (i = 0; i < 4; i++)
+ if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
+ (i * 8));
wr32(E1000_LEDCTL, ledctl_blink);
@@ -1191,15 +1184,7 @@ s32 igb_blink_led(struct e1000_hw *hw)
**/
s32 igb_led_off(struct e1000_hw *hw)
{
- u32 ctrl;
-
switch (hw->phy.media_type) {
- case e1000_media_type_fiber:
- ctrl = rd32(E1000_CTRL);
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- wr32(E1000_CTRL, ctrl);
- break;
case e1000_media_type_copper:
wr32(E1000_LEDCTL, hw->mac.ledctl_mode1);
break;
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 9598ac0..a9c37cb 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -168,8 +168,7 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ecmd->duplex = -1;
}
- ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
- hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
return 0;
}
@@ -191,23 +190,18 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
- if (hw->phy.media_type == e1000_media_type_fiber)
- hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg;
- else
- hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
ecmd->advertising = hw->phy.autoneg_advertised;
- } else
+ } else {
if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
clear_bit(__IGB_RESETTING, &adapter->state);
return -EINVAL;
}
+ }
/* reset the link */
-
if (netif_running(adapter->netdev)) {
igb_down(adapter);
igb_up(adapter);
@@ -267,8 +261,8 @@ static int igb_set_pauseparam(struct net_device *netdev,
} else
igb_reset(adapter);
} else
- retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
- igb_setup_link(hw) : igb_force_mac_fc(hw));
+ retval = ((hw->phy.media_type == e1000_media_type_copper) ?
+ igb_force_mac_fc(hw) : igb_setup_link(hw));
clear_bit(__IGB_RESETTING, &adapter->state);
return retval;
@@ -1483,8 +1477,7 @@ static int igb_setup_loopback_test(struct igb_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
u32 reg;
- if (hw->phy.media_type == e1000_media_type_fiber ||
- hw->phy.media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
reg = rd32(E1000_RCTL);
reg |= E1000_RCTL_LBM_TCVR;
wr32(E1000_RCTL, reg);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index adb09d3..39b3b6a 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2618,10 +2618,6 @@ static bool igb_has_link(struct igb_adapter *adapter)
link_active = true;
}
break;
- case e1000_media_type_fiber:
- ret_val = hw->mac.ops.check_for_link(hw);
- link_active = !!(rd32(E1000_STATUS) & E1000_STATUS_LU);
- break;
case e1000_media_type_internal_serdes:
ret_val = hw->mac.ops.check_for_link(hw);
link_active = hw->mac.serdes_has_link;
@@ -5136,14 +5132,6 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
mac->autoneg = 0;
- /* Fiber NICs only allow 1000 gbps Full duplex */
- if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- dev_err(&adapter->pdev->dev,
- "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
- }
-
switch (spddplx) {
case SPEED_10 + DUPLEX_HALF:
mac->forced_speed_duplex = ADVERTISE_10_HALF;
generated by cgit v0.10.2 at 2024-11-11 22:55:20 (GMT)