summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig23
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/atmel_serial.c207
-rw-r--r--drivers/serial/imx.c10
-rw-r--r--drivers/serial/mpc52xx_uart.c2
-rw-r--r--drivers/serial/sh-sci.c189
6 files changed, 317 insertions, 115 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f55c494..302836a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -518,12 +518,13 @@ config SERIAL_S3C2412
Serial port support for the Samsung S3C2412 and S3C2413 SoC
config SERIAL_S3C2440
- tristate "Samsung S3C2440/S3C2442 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+ tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
default y if CPU_S3C2440
default y if CPU_S3C2442
+ select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
help
- Serial port support for the Samsung S3C2440 and S3C2442 SoC
+ Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
config SERIAL_S3C24A0
tristate "Samsung S3C24A0 Serial port support"
@@ -533,21 +534,13 @@ config SERIAL_S3C24A0
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+ tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100)
select SERIAL_SAMSUNG_UARTS_4
default y
help
- Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
- SoCs
-
-config SERIAL_S5PC100
- tristate "Samsung S5PC100 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S5PC100
- select SERIAL_SAMSUNG_UARTS_4
- default y
- help
- Serial port support for the Samsung S5PC100 SoCs
+ Serial port support for the Samsung S3C6400, S3C6410, S5P6440
+ and S5PC100 SoCs
config SERIAL_S5PV210
tristate "Samsung S5PV210 Serial port support"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 6aa4723..328f107 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
-obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 2c9bf9b..eed3c2d 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -38,6 +38,7 @@
#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
+#include <linux/uaccess.h>
#include <asm/io.h>
@@ -59,6 +60,9 @@
#include <linux/serial_core.h>
+static void atmel_start_rx(struct uart_port *port);
+static void atmel_stop_rx(struct uart_port *port);
+
#ifdef CONFIG_SERIAL_ATMEL_TTYAT
/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
@@ -93,6 +97,7 @@
#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
+#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
@@ -147,6 +152,9 @@ struct atmel_uart_port {
unsigned int irq_status_prev;
struct circ_buf rx_ring;
+
+ struct serial_rs485 rs485; /* rs485 settings */
+ unsigned int tx_done_mask;
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
@@ -187,6 +195,46 @@ static bool atmel_use_dma_tx(struct uart_port *port)
}
#endif
+/* Enable or disable the rs485 support */
+void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int mode;
+
+ spin_lock(&port->lock);
+
+ /* Disable interrupts */
+ UART_PUT_IDR(port, atmel_port->tx_done_mask);
+
+ mode = UART_GET_MR(port);
+
+ /* Resetting serial mode to RS232 (0x0) */
+ mode &= ~ATMEL_US_USMODE;
+
+ atmel_port->rs485 = *rs485conf;
+
+ if (rs485conf->flags & SER_RS485_ENABLED) {
+ dev_dbg(port->dev, "Setting UART to RS485\n");
+ atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+ UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
+ mode |= ATMEL_US_USMODE_RS485;
+ } else {
+ dev_dbg(port->dev, "Setting UART to RS232\n");
+ if (atmel_use_dma_tx(port))
+ atmel_port->tx_done_mask = ATMEL_US_ENDTX |
+ ATMEL_US_TXBUFE;
+ else
+ atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+ }
+ UART_PUT_MR(port, mode);
+
+ /* Enable interrupts */
+ UART_PUT_IER(port, atmel_port->tx_done_mask);
+
+ spin_unlock(&port->lock);
+
+}
+
/*
* Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
*/
@@ -202,6 +250,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
{
unsigned int control = 0;
unsigned int mode;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
#ifdef CONFIG_ARCH_AT91RM9200
if (cpu_is_at91rm9200()) {
@@ -236,6 +285,17 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
mode |= ATMEL_US_CHMODE_LOC_LOOP;
else
mode |= ATMEL_US_CHMODE_NORMAL;
+
+ /* Resetting serial mode to RS232 (0x0) */
+ mode &= ~ATMEL_US_USMODE;
+
+ if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+ dev_dbg(port->dev, "Setting UART to RS485\n");
+ UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+ mode |= ATMEL_US_USMODE_RS485;
+ } else {
+ dev_dbg(port->dev, "Setting UART to RS232\n");
+ }
UART_PUT_MR(port, mode);
}
@@ -268,12 +328,17 @@ static u_int atmel_get_mctrl(struct uart_port *port)
*/
static void atmel_stop_tx(struct uart_port *port)
{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
if (atmel_use_dma_tx(port)) {
/* disable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
- UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
- } else
- UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ }
+ /* Disable interrupts */
+ UART_PUT_IDR(port, atmel_port->tx_done_mask);
+
+ if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+ atmel_start_rx(port);
}
/*
@@ -281,17 +346,39 @@ static void atmel_stop_tx(struct uart_port *port)
*/
static void atmel_start_tx(struct uart_port *port)
{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
if (atmel_use_dma_tx(port)) {
if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
/* The transmitter is already running. Yes, we
really need this.*/
return;
- UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+ if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+ atmel_stop_rx(port);
+
/* re-enable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
- } else
- UART_PUT_IER(port, ATMEL_US_TXRDY);
+ }
+ /* Enable interrupts */
+ UART_PUT_IER(port, atmel_port->tx_done_mask);
+}
+
+/*
+ * start receiving - port is in process of being opened.
+ */
+static void atmel_start_rx(struct uart_port *port)
+{
+ UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
+
+ if (atmel_use_dma_rx(port)) {
+ /* enable PDC controller */
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+ port->read_status_mask);
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+ } else {
+ UART_PUT_IER(port, ATMEL_US_RXRDY);
+ }
}
/*
@@ -302,9 +389,11 @@ static void atmel_stop_rx(struct uart_port *port)
if (atmel_use_dma_rx(port)) {
/* disable PDC receive */
UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
- UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
- } else
+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+ port->read_status_mask);
+ } else {
UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
}
/*
@@ -428,8 +517,9 @@ static void atmel_rx_chars(struct uart_port *port)
static void atmel_tx_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+ if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
UART_PUT_CHAR(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
@@ -437,7 +527,7 @@ static void atmel_tx_chars(struct uart_port *port)
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
- while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+ while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
@@ -449,7 +539,8 @@ static void atmel_tx_chars(struct uart_port *port)
uart_write_wakeup(port);
if (!uart_circ_empty(xmit))
- UART_PUT_IER(port, ATMEL_US_TXRDY);
+ /* Enable interrupts */
+ UART_PUT_IER(port, atmel_port->tx_done_mask);
}
/*
@@ -501,18 +592,10 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (atmel_use_dma_tx(port)) {
- /* PDC transmit */
- if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) {
- UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
- tasklet_schedule(&atmel_port->tasklet);
- }
- } else {
- /* Interrupt transmit */
- if (pending & ATMEL_US_TXRDY) {
- UART_PUT_IDR(port, ATMEL_US_TXRDY);
- tasklet_schedule(&atmel_port->tasklet);
- }
+ if (pending & atmel_port->tx_done_mask) {
+ /* Either PDC or interrupt transmission */
+ UART_PUT_IDR(port, atmel_port->tx_done_mask);
+ tasklet_schedule(&atmel_port->tasklet);
}
}
@@ -590,9 +673,15 @@ static void atmel_tx_dma(struct uart_port *port)
UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
UART_PUT_TCR(port, count);
- /* re-enable PDC transmit and interrupts */
+ /* re-enable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
- UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+ /* Enable interrupts */
+ UART_PUT_IER(port, atmel_port->tx_done_mask);
+ } else {
+ if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+ /* DMA done, stop TX, start RX for RS485 */
+ atmel_start_rx(port);
+ }
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1017,6 +1106,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
{
unsigned long flags;
unsigned int mode, imr, quot, baud;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
/* Get current mode register */
mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
@@ -1115,6 +1205,17 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
/* disable receiver and transmitter */
UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+ /* Resetting serial mode to RS232 (0x0) */
+ mode &= ~ATMEL_US_USMODE;
+
+ if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+ dev_dbg(port->dev, "Setting UART to RS485\n");
+ UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+ mode |= ATMEL_US_USMODE_RS485;
+ } else {
+ dev_dbg(port->dev, "Setting UART to RS232\n");
+ }
+
/* set the parity, stop bits and data size */
UART_PUT_MR(port, mode);
@@ -1231,6 +1332,35 @@ static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
}
#endif
+static int
+atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
+{
+ struct serial_rs485 rs485conf;
+
+ switch (cmd) {
+ case TIOCSRS485:
+ if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
+ sizeof(rs485conf)))
+ return -EFAULT;
+
+ atmel_config_rs485(port, &rs485conf);
+ break;
+
+ case TIOCGRS485:
+ if (copy_to_user((struct serial_rs485 *) arg,
+ &(to_atmel_uart_port(port)->rs485),
+ sizeof(rs485conf)))
+ return -EFAULT;
+ break;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+
+
static struct uart_ops atmel_pops = {
.tx_empty = atmel_tx_empty,
.set_mctrl = atmel_set_mctrl,
@@ -1250,6 +1380,7 @@ static struct uart_ops atmel_pops = {
.config_port = atmel_config_port,
.verify_port = atmel_verify_port,
.pm = atmel_serial_pm,
+ .ioctl = atmel_ioctl,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = atmel_poll_get_char,
.poll_put_char = atmel_poll_put_char,
@@ -1265,13 +1396,12 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
struct uart_port *port = &atmel_port->uart;
struct atmel_uart_data *data = pdev->dev.platform_data;
- port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF;
- port->ops = &atmel_pops;
- port->fifosize = 1;
- port->line = pdev->id;
- port->dev = &pdev->dev;
-
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->ops = &atmel_pops;
+ port->fifosize = 1;
+ port->line = pdev->id;
+ port->dev = &pdev->dev;
port->mapbase = pdev->resource[0].start;
port->irq = pdev->resource[1].start;
@@ -1299,8 +1429,16 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
atmel_port->use_dma_rx = data->use_dma_rx;
atmel_port->use_dma_tx = data->use_dma_tx;
- if (atmel_use_dma_tx(port))
+ atmel_port->rs485 = data->rs485;
+ /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
+ if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+ atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+ else if (atmel_use_dma_tx(port)) {
port->fifosize = PDC_BUFFER_SIZE;
+ atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
+ } else {
+ atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+ }
}
/*
@@ -1334,6 +1472,7 @@ static void atmel_console_putchar(struct uart_port *port, int ch)
static void atmel_console_write(struct console *co, const char *s, u_int count)
{
struct uart_port *port = &atmel_ports[co->index].uart;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, imr;
unsigned int pdc_tx;
@@ -1341,7 +1480,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
* First, save IMR and then disable interrupts
*/
imr = UART_GET_IMR(port);
- UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
+ UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
/* Store PDC transmit status and disable it */
pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 4315b23..eacb588 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -120,7 +120,8 @@
#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
-#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
+#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
+#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */
#define UCR4_INVR (1<<9) /* Inverted infrared reception */
#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
@@ -591,6 +592,9 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
return 0;
}
+/* half the RX buffer size */
+#define CTSTL 16
+
static int imx_startup(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
@@ -607,6 +611,10 @@ static int imx_startup(struct uart_port *port)
if (USE_IRDA(sport))
temp |= UCR4_IRSC;
+ /* set the trigger level for CTS */
+ temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF);
+ temp |= CTSTL<< UCR4_CTSTL_SHF;
+
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
if (USE_IRDA(sport)) {
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index a176ab4..02469c3 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -1467,7 +1467,7 @@ mpc52xx_uart_init(void)
/*
* Map the PSC FIFO Controller and init if on MPC512x.
*/
- if (psc_ops->fifoc_init) {
+ if (psc_ops && psc_ops->fifoc_init) {
ret = psc_ops->fifoc_init();
if (ret)
return ret;
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 8eb094c..8d993c4 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -83,16 +83,16 @@ struct sci_port {
/* Interface clock */
struct clk *iclk;
- /* Data clock */
- struct clk *dclk;
+ /* Function clock */
+ struct clk *fclk;
struct list_head node;
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
struct device *dma_dev;
- enum sh_dmae_slave_chan_id slave_tx;
- enum sh_dmae_slave_chan_id slave_rx;
+ unsigned int slave_tx;
+ unsigned int slave_rx;
struct dma_async_tx_descriptor *desc_tx;
struct dma_async_tx_descriptor *desc_rx[2];
dma_cookie_t cookie_tx;
@@ -107,6 +107,7 @@ struct sci_port {
struct work_struct work_tx;
struct work_struct work_rx;
struct timer_list rx_timer;
+ unsigned int rx_timeout;
#endif
};
@@ -674,22 +675,22 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
struct sci_port *s = to_sci_port(port);
if (s->chan_rx) {
- unsigned long tout;
u16 scr = sci_in(port, SCSCR);
u16 ssr = sci_in(port, SCxSR);
/* Disable future Rx interrupts */
- sci_out(port, SCSCR, scr & ~SCI_CTRL_FLAGS_RIE);
+ if (port->type == PORT_SCIFA) {
+ disable_irq_nosync(irq);
+ scr |= 0x4000;
+ } else {
+ scr &= ~SCI_CTRL_FLAGS_RIE;
+ }
+ sci_out(port, SCSCR, scr);
/* Clear current interrupt */
sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
- /* Calculate delay for 1.5 DMA buffers */
- tout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
- port->fifosize / 2;
- dev_dbg(port->dev, "Rx IRQ: setup timeout in %lu ms\n",
- tout * 1000 / HZ);
- if (tout < 2)
- tout = 2;
- mod_timer(&s->rx_timer, jiffies + tout);
+ dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
+ jiffies, s->rx_timeout);
+ mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
return IRQ_HANDLED;
}
@@ -799,7 +800,7 @@ static int sci_notifier(struct notifier_block *self,
(phase == CPUFREQ_RESUMECHANGE)) {
spin_lock_irqsave(&priv->lock, flags);
list_for_each_entry(sci_port, &priv->ports, node)
- sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -810,21 +811,17 @@ static void sci_clk_enable(struct uart_port *port)
{
struct sci_port *sci_port = to_sci_port(port);
- clk_enable(sci_port->dclk);
- sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
-
- if (sci_port->iclk)
- clk_enable(sci_port->iclk);
+ clk_enable(sci_port->iclk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
+ clk_enable(sci_port->fclk);
}
static void sci_clk_disable(struct uart_port *port)
{
struct sci_port *sci_port = to_sci_port(port);
- if (sci_port->iclk)
- clk_disable(sci_port->iclk);
-
- clk_disable(sci_port->dclk);
+ clk_disable(sci_port->fclk);
+ clk_disable(sci_port->iclk);
}
static int sci_request_irq(struct sci_port *port)
@@ -913,22 +910,26 @@ static void sci_dma_tx_complete(void *arg)
spin_lock_irqsave(&port->lock, flags);
- xmit->tail += s->sg_tx.length;
+ xmit->tail += sg_dma_len(&s->sg_tx);
xmit->tail &= UART_XMIT_SIZE - 1;
- port->icount.tx += s->sg_tx.length;
+ port->icount.tx += sg_dma_len(&s->sg_tx);
async_tx_ack(s->desc_tx);
s->cookie_tx = -EINVAL;
s->desc_tx = NULL;
- spin_unlock_irqrestore(&port->lock, flags);
-
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_chars_pending(xmit))
+ if (!uart_circ_empty(xmit)) {
schedule_work(&s->work_tx);
+ } else if (port->type == PORT_SCIFA) {
+ u16 ctrl = sci_in(port, SCSCR);
+ sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
}
/* Locking: called with port lock held */
@@ -972,13 +973,13 @@ static void sci_dma_rx_complete(void *arg)
unsigned long flags;
int count;
- dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+ dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx);
spin_lock_irqsave(&port->lock, flags);
count = sci_dma_rx_push(s, tty, s->buf_len_rx);
- mod_timer(&s->rx_timer, jiffies + msecs_to_jiffies(5));
+ mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
spin_unlock_irqrestore(&port->lock, flags);
@@ -1050,6 +1051,8 @@ static void sci_submit_rx(struct sci_port *s)
sci_rx_dma_release(s, true);
return;
}
+ dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
+ s->cookie_rx[i], i);
}
s->active_rx = s->cookie_rx[0];
@@ -1107,10 +1110,10 @@ static void work_fn_rx(struct work_struct *work)
return;
}
- dev_dbg(port->dev, "%s: cookie %d #%d\n", __func__,
- s->cookie_rx[new], new);
-
s->active_rx = s->cookie_rx[!new];
+
+ dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__,
+ s->cookie_rx[new], new, s->active_rx);
}
static void work_fn_tx(struct work_struct *work)
@@ -1131,14 +1134,13 @@ static void work_fn_tx(struct work_struct *work)
*/
spin_lock_irq(&port->lock);
sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
- sg->dma_address = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
+ sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
sg->offset;
- sg->length = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
+ sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
- sg->dma_length = sg->length;
spin_unlock_irq(&port->lock);
- BUG_ON(!sg->length);
+ BUG_ON(!sg_dma_len(sg));
desc = chan->device->device_prep_slave_sg(chan,
sg, s->sg_len_tx, DMA_TO_DEVICE,
@@ -1173,23 +1175,28 @@ static void work_fn_tx(struct work_struct *work)
static void sci_start_tx(struct uart_port *port)
{
+ struct sci_port *s = to_sci_port(port);
unsigned short ctrl;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- struct sci_port *s = to_sci_port(port);
-
- if (s->chan_tx) {
- if (!uart_circ_empty(&s->port.state->xmit) && s->cookie_tx < 0)
- schedule_work(&s->work_tx);
-
- return;
+ if (port->type == PORT_SCIFA) {
+ u16 new, scr = sci_in(port, SCSCR);
+ if (s->chan_tx)
+ new = scr | 0x8000;
+ else
+ new = scr & ~0x8000;
+ if (new != scr)
+ sci_out(port, SCSCR, new);
}
+ if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
+ s->cookie_tx < 0)
+ schedule_work(&s->work_tx);
#endif
-
- /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = sci_in(port, SCSCR);
- ctrl |= SCI_CTRL_FLAGS_TIE;
- sci_out(port, SCSCR, ctrl);
+ if (!s->chan_tx || port->type == PORT_SCIFA) {
+ /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = sci_in(port, SCSCR);
+ sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
+ }
}
static void sci_stop_tx(struct uart_port *port)
@@ -1198,6 +1205,8 @@ static void sci_stop_tx(struct uart_port *port)
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
+ if (port->type == PORT_SCIFA)
+ ctrl &= ~0x8000;
ctrl &= ~SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
}
@@ -1208,6 +1217,8 @@ static void sci_start_rx(struct uart_port *port)
/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl |= sci_in(port, SCSCR);
+ if (port->type == PORT_SCIFA)
+ ctrl &= ~0x4000;
sci_out(port, SCSCR, ctrl);
}
@@ -1217,6 +1228,8 @@ static void sci_stop_rx(struct uart_port *port)
/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
ctrl = sci_in(port, SCSCR);
+ if (port->type == PORT_SCIFA)
+ ctrl &= ~0x4000;
ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
sci_out(port, SCSCR, ctrl);
}
@@ -1251,8 +1264,12 @@ static void rx_timer_fn(unsigned long arg)
{
struct sci_port *s = (struct sci_port *)arg;
struct uart_port *port = &s->port;
-
u16 scr = sci_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA) {
+ scr &= ~0x4000;
+ enable_irq(s->irqs[1]);
+ }
sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE);
dev_dbg(port->dev, "DMA Rx timed out\n");
schedule_work(&s->work_rx);
@@ -1339,8 +1356,7 @@ static void sci_request_dma(struct uart_port *port)
sg_init_table(sg, 1);
sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
(int)buf[i] & ~PAGE_MASK);
- sg->dma_address = dma[i];
- sg->dma_length = sg->length;
+ sg_dma_address(sg) = dma[i];
}
INIT_WORK(&s->work_rx, work_fn_rx);
@@ -1403,8 +1419,12 @@ static void sci_shutdown(struct uart_port *port)
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ struct sci_port *s = to_sci_port(port);
+#endif
unsigned int status, baud, smr_val, max_baud;
int t = -1;
+ u16 scfcr = 0;
/*
* earlyprintk comes here early on with port->uartclk set to zero.
@@ -1427,7 +1447,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
if (port->type != PORT_SCI)
- sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+ sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST);
smr_val = sci_in(port, SCSMR) & 3;
if ((termios->c_cflag & CSIZE) == CS7)
@@ -1458,10 +1478,32 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
}
sci_init_pins(port, termios->c_cflag);
- sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
+ sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0));
sci_out(port, SCSCR, SCSCR_INIT(port));
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ /*
+ * Calculate delay for 1.5 DMA buffers: see
+ * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits
+ * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
+ * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
+ * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO
+ * sizes), but it has been found out experimentally, that this is not
+ * enough: the driver too often needlessly runs on a DMA timeout. 20ms
+ * as a minimum seem to work perfectly.
+ */
+ if (s->chan_rx) {
+ s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
+ port->fifosize / 2;
+ dev_dbg(port->dev,
+ "DMA Rx t-out %ums, tty t-out %u jiffies\n",
+ s->rx_timeout * 1000 / HZ, port->timeout);
+ if (s->rx_timeout < msecs_to_jiffies(20))
+ s->rx_timeout = msecs_to_jiffies(20);
+ }
+#endif
+
if ((termios->c_cflag & CREAD) != 0)
sci_start_rx(port);
}
@@ -1553,10 +1595,10 @@ static struct uart_ops sci_uart_ops = {
#endif
};
-static void __devinit sci_init_single(struct platform_device *dev,
- struct sci_port *sci_port,
- unsigned int index,
- struct plat_sci_port *p)
+static int __devinit sci_init_single(struct platform_device *dev,
+ struct sci_port *sci_port,
+ unsigned int index,
+ struct plat_sci_port *p)
{
struct uart_port *port = &sci_port->port;
@@ -1577,8 +1619,23 @@ static void __devinit sci_init_single(struct platform_device *dev,
}
if (dev) {
- sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
- sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
+ sci_port->iclk = clk_get(&dev->dev, "sci_ick");
+ if (IS_ERR(sci_port->iclk)) {
+ sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
+ if (IS_ERR(sci_port->iclk)) {
+ dev_err(&dev->dev, "can't get iclk\n");
+ return PTR_ERR(sci_port->iclk);
+ }
+ }
+
+ /*
+ * The function clock is optional, ignore it if we can't
+ * find it.
+ */
+ sci_port->fclk = clk_get(&dev->dev, "sci_fck");
+ if (IS_ERR(sci_port->fclk))
+ sci_port->fclk = NULL;
+
sci_port->enable = sci_clk_enable;
sci_port->disable = sci_clk_disable;
port->dev = &dev->dev;
@@ -1605,6 +1662,7 @@ static void __devinit sci_init_single(struct platform_device *dev,
#endif
memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
+ return 0;
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
@@ -1754,8 +1812,11 @@ static int sci_remove(struct platform_device *dev)
cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
spin_lock_irqsave(&priv->lock, flags);
- list_for_each_entry(p, &priv->ports, node)
+ list_for_each_entry(p, &priv->ports, node) {
uart_remove_one_port(&sci_uart_driver, &p->port);
+ clk_put(p->iclk);
+ clk_put(p->fclk);
+ }
spin_unlock_irqrestore(&priv->lock, flags);
kfree(priv);
@@ -1781,7 +1842,9 @@ static int __devinit sci_probe_single(struct platform_device *dev,
return 0;
}
- sci_init_single(dev, sciport, index, p);
+ ret = sci_init_single(dev, sciport, index, p);
+ if (ret)
+ return ret;
ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
if (ret)
generated by cgit v0.10.2 at 2024-08-05 18:20:02 (GMT)