summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r--drivers/usb/host/xhci.c416
1 files changed, 406 insertions, 10 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7e42772..40e0a0c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -21,6 +21,7 @@
*/
#include <linux/irq.h>
+#include <linux/log2.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
@@ -352,11 +353,7 @@ void xhci_event_ring_work(unsigned long arg)
if (!xhci->devs[i])
continue;
for (j = 0; j < 31; ++j) {
- struct xhci_ring *ring = xhci->devs[i]->eps[j].ring;
- if (!ring)
- continue;
- xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j);
- xhci_debug_segment(xhci, ring->deq_seg);
+ xhci_dbg_ep_rings(xhci, i, j, &xhci->devs[i]->eps[j]);
}
}
@@ -726,8 +723,21 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
spin_lock_irqsave(&xhci->lock, flags);
if (xhci->xhc_state & XHCI_STATE_DYING)
goto dying;
- ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
- slot_id, ep_index);
+ if (xhci->devs[slot_id]->eps[ep_index].ep_state &
+ EP_GETTING_STREAMS) {
+ xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep "
+ "is transitioning to using streams.\n");
+ ret = -EINVAL;
+ } else if (xhci->devs[slot_id]->eps[ep_index].ep_state &
+ EP_GETTING_NO_STREAMS) {
+ xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep "
+ "is transitioning to "
+ "not having streams.\n");
+ ret = -EINVAL;
+ } else {
+ ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ }
spin_unlock_irqrestore(&xhci->lock, flags);
} else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
spin_lock_irqsave(&xhci->lock, flags);
@@ -825,7 +835,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
xhci_debug_ring(xhci, xhci->event_ring);
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index];
- ep_ring = ep->ring;
+ ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+ if (!ep_ring) {
+ ret = -EINVAL;
+ goto done;
+ }
+
xhci_dbg(xhci, "Endpoint ring:\n");
xhci_debug_ring(xhci, ep_ring);
td = (struct xhci_td *) urb->hcpriv;
@@ -1369,7 +1384,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
* or it will attempt to resend it on the next doorbell ring.
*/
xhci_find_new_dequeue_state(xhci, udev->slot_id,
- ep_index, ep->stopped_td,
+ ep_index, ep->stopped_stream, ep->stopped_td,
&deq_state);
/* HW with the reset endpoint quirk will use the saved dequeue state to
@@ -1378,10 +1393,12 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
xhci_dbg(xhci, "Queueing new dequeue state\n");
xhci_queue_new_dequeue_state(xhci, udev->slot_id,
- ep_index, &deq_state);
+ ep_index, ep->stopped_stream, &deq_state);
} else {
/* Better hope no one uses the input context between now and the
* reset endpoint completion!
+ * XXX: No idea how this hardware will react when stream rings
+ * are enabled.
*/
xhci_dbg(xhci, "Setting up input context for "
"configure endpoint command\n");
@@ -1438,12 +1455,391 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
kfree(virt_ep->stopped_td);
xhci_ring_cmd_db(xhci);
}
+ virt_ep->stopped_td = NULL;
+ virt_ep->stopped_trb = NULL;
+ virt_ep->stopped_stream = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
if (ret)
xhci_warn(xhci, "FIXME allocate a new ring segment\n");
}
+static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev, struct usb_host_endpoint *ep,
+ unsigned int slot_id)
+{
+ int ret;
+ unsigned int ep_index;
+ unsigned int ep_state;
+
+ if (!ep)
+ return -EINVAL;
+ ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, __func__);
+ if (ret <= 0)
+ return -EINVAL;
+ if (ep->ss_ep_comp.bmAttributes == 0) {
+ xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
+ " descriptor for ep 0x%x does not support streams\n",
+ ep->desc.bEndpointAddress);
+ return -EINVAL;
+ }
+
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+ if (ep_state & EP_HAS_STREAMS ||
+ ep_state & EP_GETTING_STREAMS) {
+ xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x "
+ "already has streams set up.\n",
+ ep->desc.bEndpointAddress);
+ xhci_warn(xhci, "Send email to xHCI maintainer and ask for "
+ "dynamic stream context array reallocation.\n");
+ return -EINVAL;
+ }
+ if (!list_empty(&xhci->devs[slot_id]->eps[ep_index].ring->td_list)) {
+ xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk "
+ "endpoint 0x%x; URBs are pending.\n",
+ ep->desc.bEndpointAddress);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void xhci_calculate_streams_entries(struct xhci_hcd *xhci,
+ unsigned int *num_streams, unsigned int *num_stream_ctxs)
+{
+ unsigned int max_streams;
+
+ /* The stream context array size must be a power of two */
+ *num_stream_ctxs = roundup_pow_of_two(*num_streams);
+ /*
+ * Find out how many primary stream array entries the host controller
+ * supports. Later we may use secondary stream arrays (similar to 2nd
+ * level page entries), but that's an optional feature for xHCI host
+ * controllers. xHCs must support at least 4 stream IDs.
+ */
+ max_streams = HCC_MAX_PSA(xhci->hcc_params);
+ if (*num_stream_ctxs > max_streams) {
+ xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",
+ max_streams);
+ *num_stream_ctxs = max_streams;
+ *num_streams = max_streams;
+ }
+}
+
+/* Returns an error code if one of the endpoint already has streams.
+ * This does not change any data structures, it only checks and gathers
+ * information.
+ */
+static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int *num_streams, u32 *changed_ep_bitmask)
+{
+ unsigned int max_streams;
+ unsigned int endpoint_flag;
+ int i;
+ int ret;
+
+ for (i = 0; i < num_eps; i++) {
+ ret = xhci_check_streams_endpoint(xhci, udev,
+ eps[i], udev->slot_id);
+ if (ret < 0)
+ return ret;
+
+ max_streams = USB_SS_MAX_STREAMS(
+ eps[i]->ss_ep_comp.bmAttributes);
+ if (max_streams < (*num_streams - 1)) {
+ xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
+ eps[i]->desc.bEndpointAddress,
+ max_streams);
+ *num_streams = max_streams+1;
+ }
+
+ endpoint_flag = xhci_get_endpoint_flag(&eps[i]->desc);
+ if (*changed_ep_bitmask & endpoint_flag)
+ return -EINVAL;
+ *changed_ep_bitmask |= endpoint_flag;
+ }
+ return 0;
+}
+
+static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps)
+{
+ u32 changed_ep_bitmask = 0;
+ unsigned int slot_id;
+ unsigned int ep_index;
+ unsigned int ep_state;
+ int i;
+
+ slot_id = udev->slot_id;
+ if (!xhci->devs[slot_id])
+ return 0;
+
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+ /* Are streams already being freed for the endpoint? */
+ if (ep_state & EP_GETTING_NO_STREAMS) {
+ xhci_warn(xhci, "WARN Can't disable streams for "
+ "endpoint 0x%x\n, "
+ "streams are being disabled already.",
+ eps[i]->desc.bEndpointAddress);
+ return 0;
+ }
+ /* Are there actually any streams to free? */
+ if (!(ep_state & EP_HAS_STREAMS) &&
+ !(ep_state & EP_GETTING_STREAMS)) {
+ xhci_warn(xhci, "WARN Can't disable streams for "
+ "endpoint 0x%x\n, "
+ "streams are already disabled!",
+ eps[i]->desc.bEndpointAddress);
+ xhci_warn(xhci, "WARN xhci_free_streams() called "
+ "with non-streams endpoint\n");
+ return 0;
+ }
+ changed_ep_bitmask |= xhci_get_endpoint_flag(&eps[i]->desc);
+ }
+ return changed_ep_bitmask;
+}
+
+/*
+ * The USB device drivers use this function (though the HCD interface in USB
+ * core) to prepare a set of bulk endpoints to use streams. Streams are used to
+ * coordinate mass storage command queueing across multiple endpoints (basically
+ * a stream ID == a task ID).
+ *
+ * Setting up streams involves allocating the same size stream context array
+ * for each endpoint and issuing a configure endpoint command for all endpoints.
+ *
+ * Don't allow the call to succeed if one endpoint only supports one stream
+ * (which means it doesn't support streams at all).
+ *
+ * Drivers may get less stream IDs than they asked for, if the host controller
+ * hardware or endpoints claim they can't support the number of requested
+ * stream IDs.
+ */
+int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags)
+{
+ int i, ret;
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *vdev;
+ struct xhci_command *config_cmd;
+ unsigned int ep_index;
+ unsigned int num_stream_ctxs;
+ unsigned long flags;
+ u32 changed_ep_bitmask = 0;
+
+ if (!eps)
+ return -EINVAL;
+
+ /* Add one to the number of streams requested to account for
+ * stream 0 that is reserved for xHCI usage.
+ */
+ num_streams += 1;
+ xhci = hcd_to_xhci(hcd);
+ xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
+ num_streams);
+
+ config_cmd = xhci_alloc_command(xhci, true, true, mem_flags);
+ if (!config_cmd) {
+ xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
+ return -ENOMEM;
+ }
+
+ /* Check to make sure all endpoints are not already configured for
+ * streams. While we're at it, find the maximum number of streams that
+ * all the endpoints will support and check for duplicate endpoints.
+ */
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_calculate_streams_and_bitmask(xhci, udev, eps,
+ num_eps, &num_streams, &changed_ep_bitmask);
+ if (ret < 0) {
+ xhci_free_command(xhci, config_cmd);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return ret;
+ }
+ if (num_streams <= 1) {
+ xhci_warn(xhci, "WARN: endpoints can't handle "
+ "more than one stream.\n");
+ xhci_free_command(xhci, config_cmd);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return -EINVAL;
+ }
+ vdev = xhci->devs[udev->slot_id];
+ /* Mark each endpoint as being in transistion, so
+ * xhci_urb_enqueue() will reject all URBs.
+ */
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ vdev->eps[ep_index].ep_state |= EP_GETTING_STREAMS;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Setup internal data structures and allocate HW data structures for
+ * streams (but don't install the HW structures in the input context
+ * until we're sure all memory allocation succeeded).
+ */
+ xhci_calculate_streams_entries(xhci, &num_streams, &num_stream_ctxs);
+ xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",
+ num_stream_ctxs, num_streams);
+
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci,
+ num_stream_ctxs,
+ num_streams, mem_flags);
+ if (!vdev->eps[ep_index].stream_info)
+ goto cleanup;
+ /* Set maxPstreams in endpoint context and update deq ptr to
+ * point to stream context array. FIXME
+ */
+ }
+
+ /* Set up the input context for a configure endpoint command. */
+ for (i = 0; i < num_eps; i++) {
+ struct xhci_ep_ctx *ep_ctx;
+
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ ep_ctx = xhci_get_ep_ctx(xhci, config_cmd->in_ctx, ep_index);
+
+ xhci_endpoint_copy(xhci, config_cmd->in_ctx,
+ vdev->out_ctx, ep_index);
+ xhci_setup_streams_ep_input_ctx(xhci, ep_ctx,
+ vdev->eps[ep_index].stream_info);
+ }
+ /* Tell the HW to drop its old copy of the endpoint context info
+ * and add the updated copy from the input context.
+ */
+ xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx,
+ vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask);
+
+ /* Issue and wait for the configure endpoint command */
+ ret = xhci_configure_endpoint(xhci, udev, config_cmd,
+ false, false);
+
+ /* xHC rejected the configure endpoint command for some reason, so we
+ * leave the old ring intact and free our internal streams data
+ * structure.
+ */
+ if (ret < 0)
+ goto cleanup;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+ xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
+ udev->slot_id, ep_index);
+ vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS;
+ }
+ xhci_free_command(xhci, config_cmd);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Subtract 1 for stream 0, which drivers can't use */
+ return num_streams - 1;
+
+cleanup:
+ /* If it didn't work, free the streams! */
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+ vdev->eps[ep_index].stream_info = NULL;
+ /* FIXME Unset maxPstreams in endpoint context and
+ * update deq ptr to point to normal string ring.
+ */
+ vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+ vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+ xhci_endpoint_zero(xhci, vdev, eps[i]);
+ }
+ xhci_free_command(xhci, config_cmd);
+ return -ENOMEM;
+}
+
+/* Transition the endpoint from using streams to being a "normal" endpoint
+ * without streams.
+ *
+ * Modify the endpoint context state, submit a configure endpoint command,
+ * and free all endpoint rings for streams if that completes successfully.
+ */
+int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags)
+{
+ int i, ret;
+ struct xhci_hcd *xhci;
+ struct xhci_virt_device *vdev;
+ struct xhci_command *command;
+ unsigned int ep_index;
+ unsigned long flags;
+ u32 changed_ep_bitmask;
+
+ xhci = hcd_to_xhci(hcd);
+ vdev = xhci->devs[udev->slot_id];
+
+ /* Set up a configure endpoint command to remove the streams rings */
+ spin_lock_irqsave(&xhci->lock, flags);
+ changed_ep_bitmask = xhci_calculate_no_streams_bitmask(xhci,
+ udev, eps, num_eps);
+ if (changed_ep_bitmask == 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return -EINVAL;
+ }
+
+ /* Use the xhci_command structure from the first endpoint. We may have
+ * allocated too many, but the driver may call xhci_free_streams() for
+ * each endpoint it grouped into one call to xhci_alloc_streams().
+ */
+ ep_index = xhci_get_endpoint_index(&eps[0]->desc);
+ command = vdev->eps[ep_index].stream_info->free_streams_command;
+ for (i = 0; i < num_eps; i++) {
+ struct xhci_ep_ctx *ep_ctx;
+
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+ xhci->devs[udev->slot_id]->eps[ep_index].ep_state |=
+ EP_GETTING_NO_STREAMS;
+
+ xhci_endpoint_copy(xhci, command->in_ctx,
+ vdev->out_ctx, ep_index);
+ xhci_setup_no_streams_ep_input_ctx(xhci, ep_ctx,
+ &vdev->eps[ep_index]);
+ }
+ xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
+ vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Issue and wait for the configure endpoint command,
+ * which must succeed.
+ */
+ ret = xhci_configure_endpoint(xhci, udev, command,
+ false, true);
+
+ /* xHC rejected the configure endpoint command for some reason, so we
+ * leave the streams rings intact.
+ */
+ if (ret < 0)
+ return ret;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ for (i = 0; i < num_eps; i++) {
+ ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+ xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+ vdev->eps[ep_index].stream_info = NULL;
+ /* FIXME Unset maxPstreams in endpoint context and
+ * update deq ptr to point to normal string ring.
+ */
+ vdev->eps[ep_index].ep_state &= ~EP_GETTING_NO_STREAMS;
+ vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ return 0;
+}
+
/*
* This submits a Reset Device Command, which will set the device state to 0,
* set the device address to 0, and disable all the endpoints except the default