diff options
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r-- | drivers/usb/musb/Kconfig | 5 | ||||
-rw-r--r-- | drivers/usb/musb/am35x.c | 13 | ||||
-rw-r--r-- | drivers/usb/musb/blackfin.c | 13 | ||||
-rw-r--r-- | drivers/usb/musb/davinci.c | 11 | ||||
-rw-r--r-- | drivers/usb/musb/musb_am335x.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.c | 65 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.h | 3 | ||||
-rw-r--r-- | drivers/usb/musb/musb_cppi41.c | 8 | ||||
-rw-r--r-- | drivers/usb/musb/musb_dsps.c | 99 | ||||
-rw-r--r-- | drivers/usb/musb/musb_gadget.c | 8 | ||||
-rw-r--r-- | drivers/usb/musb/musb_host.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_virthub.c | 65 | ||||
-rw-r--r-- | drivers/usb/musb/omap2430.c | 54 | ||||
-rw-r--r-- | drivers/usb/musb/ux500.c | 15 |
14 files changed, 209 insertions, 154 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index c258a97..57dfc0c 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -75,6 +75,7 @@ config USB_MUSB_TUSB6010 config USB_MUSB_OMAP2PLUS tristate "OMAP2430 and onwards" depends on ARCH_OMAP2PLUS + select GENERIC_PHY config USB_MUSB_AM35X tristate "AM35x" @@ -90,7 +91,7 @@ config USB_MUSB_BLACKFIN depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523) config USB_MUSB_UX500 - tristate "U8500 and U5500" + tristate "Ux500 platforms" endchoice @@ -112,7 +113,7 @@ choice allow using DMA on multiplatform kernels. config USB_UX500_DMA - bool 'ST Ericsson U8500 and U5500' + bool 'ST Ericsson Ux500' depends on USB_MUSB_UX500 help Enable DMA transfers on UX500 platforms. diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 790b22b..ca45b39 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -599,23 +599,16 @@ static int am35x_resume(struct device *dev) return 0; } - -static struct dev_pm_ops am35x_pm_ops = { - .suspend = am35x_suspend, - .resume = am35x_resume, -}; - -#define DEV_PM_OPS &am35x_pm_ops -#else -#define DEV_PM_OPS NULL #endif +static SIMPLE_DEV_PM_OPS(am35x_pm_ops, am35x_suspend, am35x_resume); + static struct platform_driver am35x_driver = { .probe = am35x_probe, .remove = am35x_remove, .driver = { .name = "musb-am35x", - .pm = DEV_PM_OPS, + .pm = &am35x_pm_ops, }, }; diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 72e2056..d9692f7 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -561,23 +561,16 @@ static int bfin_resume(struct device *dev) return 0; } - -static struct dev_pm_ops bfin_pm_ops = { - .suspend = bfin_suspend, - .resume = bfin_resume, -}; - -#define DEV_PM_OPS &bfin_pm_ops -#else -#define DEV_PM_OPS NULL #endif +static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume); + static struct platform_driver bfin_driver = { .probe = bfin_probe, .remove = __exit_p(bfin_remove), .driver = { .name = "musb-blackfin", - .pm = DEV_PM_OPS, + .pm = &bfin_pm_ops, }, }; diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 45aae0b..1121fd7 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -513,7 +513,7 @@ static const struct platform_device_info davinci_dev_info = { static int davinci_probe(struct platform_device *pdev) { - struct resource musb_resources[2]; + struct resource musb_resources[3]; struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); struct platform_device *musb; struct davinci_glue *glue; @@ -561,6 +561,15 @@ static int davinci_probe(struct platform_device *pdev) musb_resources[1].end = pdev->resource[1].end; musb_resources[1].flags = pdev->resource[1].flags; + /* + * For DM6467 3 resources are passed. A placeholder for the 3rd + * resource is always there, so it's safe to always copy it... + */ + musb_resources[2].name = pdev->resource[2].name; + musb_resources[2].start = pdev->resource[2].start; + musb_resources[2].end = pdev->resource[2].end; + musb_resources[2].flags = pdev->resource[2].flags; + pinfo = davinci_dev_info; pinfo.parent = &pdev->dev; pinfo.res = musb_resources; diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c index 41ac5b5..8be9b02 100644 --- a/drivers/usb/musb/musb_am335x.c +++ b/drivers/usb/musb/musb_am335x.c @@ -46,7 +46,7 @@ static struct platform_driver am335x_child_driver = { .remove = am335x_child_remove, .driver = { .name = "am335x-usb-childs", - .of_match_table = of_match_ptr(am335x_child_of_match), + .of_match_table = am335x_child_of_match, }, }; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 18e877f..0a43329 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -617,7 +617,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ default: s = "VALID"; break; - }; s; }), + } s; }), VBUSERR_RETRY_COUNT - musb->vbuserr_retry, musb->port1_status); @@ -922,6 +922,52 @@ static void musb_generic_disable(struct musb *musb) } /* + * Program the HDRC to start (enable interrupts, dma, etc.). + */ +void musb_start(struct musb *musb) +{ + void __iomem *regs = musb->mregs; + u8 devctl = musb_readb(regs, MUSB_DEVCTL); + + dev_dbg(musb->controller, "<== devctl %02x\n", devctl); + + /* Set INT enable registers, enable interrupts */ + musb->intrtxe = musb->epmask; + musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(regs, MUSB_INTRUSBE, 0xf7); + + musb_writeb(regs, MUSB_TESTMODE, 0); + + /* put into basic highspeed mode and start session */ + musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE + | MUSB_POWER_HSENAB + /* ENSUSPEND wedges tusb */ + /* | MUSB_POWER_ENSUSPEND */ + ); + + musb->is_active = 0; + devctl = musb_readb(regs, MUSB_DEVCTL); + devctl &= ~MUSB_DEVCTL_SESSION; + + /* session started after: + * (a) ID-grounded irq, host mode; + * (b) vbus present/connect IRQ, peripheral mode; + * (c) peripheral initiates, using SRP + */ + if (musb->port_mode != MUSB_PORT_MODE_HOST && + (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { + musb->is_active = 1; + } else { + devctl |= MUSB_DEVCTL_SESSION; + } + + musb_platform_enable(musb); + musb_writeb(regs, MUSB_DEVCTL, devctl); +} + +/* * Make the HDRC stop (disable interrupts, etc.); * reversible by musb_start * called on gadget driver unregister @@ -1763,8 +1809,7 @@ static void musb_free(struct musb *musb) disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } - if (musb->dma_controller) - dma_controller_destroy(musb->dma_controller); + cancel_work_sync(&musb->irq_work); musb_host_free(musb); } @@ -1839,8 +1884,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_get_sync(musb->controller); - if (use_dma && dev->dma_mask) + if (use_dma && dev->dma_mask) { musb->dma_controller = dma_controller_create(musb, musb->mregs); + if (IS_ERR(musb->dma_controller)) { + status = PTR_ERR(musb->dma_controller); + goto fail2_5; + } + } /* be sure interrupts are disabled before connecting ISR */ musb_platform_disable(musb); @@ -1900,6 +1950,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status < 0) goto fail3; status = musb_gadget_setup(musb); + if (status) + musb_host_cleanup(musb); break; default: dev_err(dev, "unsupported port mode %d\n", musb->port_mode); @@ -1926,10 +1978,12 @@ fail5: fail4: musb_gadget_cleanup(musb); + musb_host_cleanup(musb); fail3: if (musb->dma_controller) dma_controller_destroy(musb->dma_controller); +fail2_5: pm_runtime_put_sync(musb->controller); fail2: @@ -1986,6 +2040,9 @@ static int musb_remove(struct platform_device *pdev) musb_exit_debugfs(musb); musb_shutdown(pdev); + if (musb->dma_controller) + dma_controller_destroy(musb->dma_controller); + musb_free(musb); device_init_wakeup(dev, 0); return 0; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 65f3917..29f7cd7 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -46,6 +46,7 @@ #include <linux/usb.h> #include <linux/usb/otg.h> #include <linux/usb/musb.h> +#include <linux/phy/phy.h> struct musb; struct musb_hw_ep; @@ -341,6 +342,7 @@ struct musb { u16 int_tx; struct usb_phy *xceiv; + struct phy *phy; int nIrq; unsigned irq_wake:1; @@ -503,6 +505,7 @@ static inline void musb_configure_ep0(struct musb *musb) extern const char musb_driver_name[]; extern void musb_stop(struct musb *musb); +extern void musb_start(struct musb *musb); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index ae95974..ff9d6de 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -484,6 +484,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) if (ret) goto err; + ret = -EINVAL; if (port > MUSB_DMA_NUM_CHANNELS || !port) goto err; if (is_tx) @@ -503,6 +504,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) dc = dma_request_slave_channel(dev, str); if (!dc) { dev_err(dev, "Falied to request %s.\n", str); + ret = -EPROBE_DEFER; goto err; } cppi41_channel->dc = dc; @@ -510,7 +512,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) return 0; err: cppi41_release_all_dma_chans(controller); - return -EINVAL; + return ret; } void dma_controller_destroy(struct dma_controller *c) @@ -526,7 +528,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) { struct cppi41_dma_controller *controller; - int ret; + int ret = 0; if (!musb->controller->of_node) { dev_err(musb->controller, "Need DT for the DMA engine.\n"); @@ -553,5 +555,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, plat_get_fail: kfree(controller); kzalloc_fail: + if (ret == -EPROBE_DEFER) + return ERR_PTR(ret); return NULL; } diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 4047cbb..1901f6f 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -121,6 +121,43 @@ struct dsps_glue { unsigned long last_timer; /* last timer data for each instance */ }; +static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) +{ + struct device *dev = musb->controller; + struct dsps_glue *glue = dev_get_drvdata(dev->parent); + + if (timeout == 0) + timeout = jiffies + msecs_to_jiffies(3); + + /* Never idle if active, or when VBUS timeout is not set as host */ + if (musb->is_active || (musb->a_wait_bcon == 0 && + musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + dev_dbg(musb->controller, "%s active, deleting timer\n", + usb_otg_state_string(musb->xceiv->state)); + del_timer(&glue->timer); + glue->last_timer = jiffies; + return; + } + if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) + return; + + if (!musb->g.dev.driver) + return; + + if (time_after(glue->last_timer, timeout) && + timer_pending(&glue->timer)) { + dev_dbg(musb->controller, + "Longer idle timer already pending, ignoring...\n"); + return; + } + glue->last_timer = timeout; + + dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", + usb_otg_state_string(musb->xceiv->state), + jiffies_to_msecs(timeout - jiffies)); + mod_timer(&glue->timer, timeout); +} + /** * dsps_musb_enable - enable interrupts */ @@ -143,6 +180,7 @@ static void dsps_musb_enable(struct musb *musb) /* Force the DRVVBUS IRQ so we can start polling for ID change. */ dsps_writel(reg_base, wrp->coreintr_set, (1 << wrp->drvvbus) << wrp->usb_shift); + dsps_musb_try_idle(musb, 0); } /** @@ -171,6 +209,7 @@ static void otg_timer(unsigned long _musb) const struct dsps_musb_wrapper *wrp = glue->wrp; u8 devctl; unsigned long flags; + int skip_session = 0; /* * We poll because DSPS IP's won't expose several OTG-critical @@ -183,10 +222,12 @@ static void otg_timer(unsigned long _musb) spin_lock_irqsave(&musb->lock, flags); switch (musb->xceiv->state) { case OTG_STATE_A_WAIT_BCON: - devctl &= ~MUSB_DEVCTL_SESSION; - dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl); + dsps_writeb(musb->mregs, MUSB_DEVCTL, 0); + skip_session = 1; + /* fall */ - devctl = dsps_readb(musb->mregs, MUSB_DEVCTL); + case OTG_STATE_A_IDLE: + case OTG_STATE_B_IDLE: if (devctl & MUSB_DEVCTL_BDEVICE) { musb->xceiv->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); @@ -194,60 +235,21 @@ static void otg_timer(unsigned long _musb) musb->xceiv->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } + if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) + dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); + mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); break; case OTG_STATE_A_WAIT_VFALL: musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; dsps_writel(musb->ctrl_base, wrp->coreintr_set, MUSB_INTR_VBUSERROR << wrp->usb_shift); break; - case OTG_STATE_B_IDLE: - devctl = dsps_readb(mregs, MUSB_DEVCTL); - if (devctl & MUSB_DEVCTL_BDEVICE) - mod_timer(&glue->timer, - jiffies + wrp->poll_seconds * HZ); - else - musb->xceiv->state = OTG_STATE_A_IDLE; - break; default: break; } spin_unlock_irqrestore(&musb->lock, flags); } -static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - struct device *dev = musb->controller; - struct dsps_glue *glue = dev_get_drvdata(dev->parent); - - if (timeout == 0) - timeout = jiffies + msecs_to_jiffies(3); - - /* Never idle if active, or when VBUS timeout is not set as host */ - if (musb->is_active || (musb->a_wait_bcon == 0 && - musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { - dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->state)); - del_timer(&glue->timer); - glue->last_timer = jiffies; - return; - } - if (musb->port_mode == MUSB_PORT_MODE_HOST) - return; - - if (time_after(glue->last_timer, timeout) && - timer_pending(&glue->timer)) { - dev_dbg(musb->controller, - "Longer idle timer already pending, ignoring...\n"); - return; - } - glue->last_timer = timeout; - - dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - usb_otg_state_string(musb->xceiv->state), - jiffies_to_msecs(timeout - jiffies)); - mod_timer(&glue->timer, timeout); -} - static irqreturn_t dsps_interrupt(int irq, void *hci) { struct musb *musb = hci; @@ -443,7 +445,7 @@ static int get_musb_port_mode(struct device *dev) case USB_DR_MODE_OTG: default: return MUSB_PORT_MODE_DUAL_ROLE; - }; + } } static int dsps_create_musb_pdev(struct dsps_glue *glue, @@ -535,6 +537,9 @@ static int dsps_probe(struct platform_device *pdev) struct dsps_glue *glue; int ret; + if (!strcmp(pdev->name, "musb-hdrc")) + return -ENODEV; + match = of_match_node(musb_dsps_of_match, pdev->dev.of_node); if (!match) { dev_err(&pdev->dev, "fail to get matching of_match struct\n"); @@ -628,7 +633,7 @@ static struct platform_driver dsps_usbss_driver = { .remove = dsps_remove, .driver = { .name = "musb-dsps", - .of_match_table = of_match_ptr(musb_dsps_of_match), + .of_match_table = musb_dsps_of_match, }, }; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 9a08679..d2d3a17 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1121,7 +1121,7 @@ static int musb_gadget_enable(struct usb_ep *ep, case USB_ENDPOINT_XFER_BULK: s = "bulk"; break; case USB_ENDPOINT_XFER_INT: s = "int"; break; default: s = "iso"; break; - }; s; }), + } s; }), musb_ep->is_in ? "IN" : "OUT", musb_ep->dma ? "dma, " : "", musb_ep->packet_sz); @@ -1790,6 +1790,10 @@ int musb_gadget_setup(struct musb *musb) musb->g.max_speed = USB_SPEED_HIGH; musb->g.speed = USB_SPEED_UNKNOWN; + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; + /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; musb->g.is_otg = 1; @@ -1855,6 +1859,8 @@ static int musb_gadget_start(struct usb_gadget *g, musb->xceiv->state = OTG_STATE_B_IDLE; spin_unlock_irqrestore(&musb->lock, flags); + musb_start(musb); + /* REVISIT: funcall to other code, which also * handles power budgeting ... this way also * ensures HdrcStart is indirectly called. diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 9a2b8c8..6582a20 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -253,7 +253,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_BULK: s = "-bulk"; break; case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break; default: s = "-intr"; break; - }; s; }), + } s; }), epnum, buf + offset, len); /* Configure endpoint */ diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index a523950..9af6bba 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -44,52 +44,6 @@ #include "musb_core.h" -/* -* Program the HDRC to start (enable interrupts, dma, etc.). -*/ -static void musb_start(struct musb *musb) -{ - void __iomem *regs = musb->mregs; - u8 devctl = musb_readb(regs, MUSB_DEVCTL); - - dev_dbg(musb->controller, "<== devctl %02x\n", devctl); - - /* Set INT enable registers, enable interrupts */ - musb->intrtxe = musb->epmask; - musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(regs, MUSB_INTRUSBE, 0xf7); - - musb_writeb(regs, MUSB_TESTMODE, 0); - - /* put into basic highspeed mode and start session */ - musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE - | MUSB_POWER_HSENAB - /* ENSUSPEND wedges tusb */ - /* | MUSB_POWER_ENSUSPEND */ - ); - - musb->is_active = 0; - devctl = musb_readb(regs, MUSB_DEVCTL); - devctl &= ~MUSB_DEVCTL_SESSION; - - /* session started after: - * (a) ID-grounded irq, host mode; - * (b) vbus present/connect IRQ, peripheral mode; - * (c) peripheral initiates, using SRP - */ - if (musb->port_mode != MUSB_PORT_MODE_HOST && - (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { - musb->is_active = 1; - } else { - devctl |= MUSB_DEVCTL_SESSION; - } - - musb_platform_enable(musb); - musb_writeb(regs, MUSB_DEVCTL, devctl); -} - static void musb_port_suspend(struct musb *musb, bool do_suspend) { struct usb_otg *otg = musb->xceiv->otg; @@ -266,6 +220,23 @@ int musb_hub_status_data(struct usb_hcd *hcd, char *buf) return retval; } +static int musb_has_gadget(struct musb *musb) +{ + /* + * In host-only mode we start a connection right away. In OTG mode + * we have to wait until we loaded a gadget. We don't really need a + * gadget if we operate as a host but we should not start a session + * as a device without a gadget or else we explode. + */ +#ifdef CONFIG_USB_MUSB_HOST + return 1; +#else + if (musb->port_mode == MUSB_PORT_MODE_HOST) + return 1; + return musb->g.dev.driver != NULL; +#endif +} + int musb_hub_control( struct usb_hcd *hcd, u16 typeReq, @@ -408,7 +379,7 @@ int musb_hub_control( * initialization logic, e.g. for OTG, or change any * logic relating to VBUS power-up. */ - if (!hcd->self.is_b_host) + if (!hcd->self.is_b_host && musb_has_gadget(musb)) musb_start(musb); break; case USB_PORT_FEAT_RESET: diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 59d2245..2a408cd 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -38,6 +38,7 @@ #include <linux/delay.h> #include <linux/usb/musb-omap.h> #include <linux/usb/omap_control_usb.h> +#include <linux/of_platform.h> #include "musb_core.h" #include "omap2430.h" @@ -305,6 +306,9 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) default: dev_dbg(dev, "ID float\n"); } + + atomic_notifier_call_chain(&musb->xceiv->notifier, + musb->xceiv->last_event, NULL); } @@ -348,11 +352,21 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - if (dev->parent->of_node) + if (dev->parent->of_node) { + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); + + /* We can't totally remove musb->xceiv as of now because + * musb core uses xceiv.state and xceiv.otg. Once we have + * a separate state machine to handle otg, these can be moved + * out of xceiv and then we can start using the generic PHY + * framework + */ musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0); - else + } else { musb->xceiv = devm_usb_get_phy_dev(dev, 0); + musb->phy = devm_phy_get(dev, "usb"); + } if (IS_ERR(musb->xceiv)) { status = PTR_ERR(musb->xceiv); @@ -364,6 +378,10 @@ static int omap2430_musb_init(struct musb *musb) return -EPROBE_DEFER; } + if (IS_ERR(musb->phy)) { + pr_err("HS USB OTG: no PHY configured\n"); + return PTR_ERR(musb->phy); + } musb->isr = omap2430_musb_interrupt; status = pm_runtime_get_sync(dev); @@ -397,7 +415,7 @@ static int omap2430_musb_init(struct musb *musb) if (glue->status != OMAP_MUSB_UNKNOWN) omap_musb_set_mailbox(glue); - usb_phy_init(musb->xceiv); + phy_init(musb->phy); pm_runtime_put_noidle(musb->controller); return 0; @@ -460,6 +478,7 @@ static int omap2430_musb_exit(struct musb *musb) del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); + phy_exit(musb->phy); return 0; } @@ -509,8 +528,12 @@ static int omap2430_probe(struct platform_device *pdev) glue->dev = &pdev->dev; glue->musb = musb; glue->status = OMAP_MUSB_UNKNOWN; + glue->control_otghs = ERR_PTR(-ENODEV); if (np) { + struct device_node *control_node; + struct platform_device *control_pdev; + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { dev_err(&pdev->dev, @@ -539,22 +562,20 @@ static int omap2430_probe(struct platform_device *pdev) of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); - pdata->has_mailbox = of_property_read_bool(np, - "ti,has-mailbox"); pdata->board_data = data; pdata->config = config; - } - if (pdata->has_mailbox) { - glue->control_otghs = omap_get_control_dev(); - if (IS_ERR(glue->control_otghs)) { - dev_vdbg(&pdev->dev, "Failed to get control device\n"); - ret = PTR_ERR(glue->control_otghs); - goto err2; + control_node = of_parse_phandle(np, "ctrl-module", 0); + if (control_node) { + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + ret = -EINVAL; + goto err2; + } + glue->control_otghs = &control_pdev->dev; } - } else { - glue->control_otghs = ERR_PTR(-ENODEV); } pdata->platform_ops = &omap2430_ops; @@ -638,7 +659,7 @@ static int omap2430_runtime_suspend(struct device *dev) OTG_INTERFSEL); omap2430_low_level_exit(musb); - usb_phy_set_suspend(musb->xceiv, 1); + phy_power_off(musb->phy); } return 0; @@ -653,8 +674,7 @@ static int omap2430_runtime_resume(struct device *dev) omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); - - usb_phy_set_suspend(musb->xceiv, 0); + phy_power_on(musb->phy); } return 0; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 59256b1..122446b 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -259,7 +259,7 @@ static int ux500_probe(struct platform_device *pdev) goto err1; } - clk = clk_get(&pdev->dev, "usb"); + clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); @@ -376,17 +376,10 @@ static int ux500_resume(struct device *dev) return 0; } - -static const struct dev_pm_ops ux500_pm_ops = { - .suspend = ux500_suspend, - .resume = ux500_resume, -}; - -#define DEV_PM_OPS (&ux500_pm_ops) -#else -#define DEV_PM_OPS NULL #endif +static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume); + static const struct of_device_id ux500_match[] = { { .compatible = "stericsson,db8500-musb", }, {} @@ -397,7 +390,7 @@ static struct platform_driver ux500_driver = { .remove = ux500_remove, .driver = { .name = "musb-ux500", - .pm = DEV_PM_OPS, + .pm = &ux500_pm_ops, .of_match_table = ux500_match, }, }; |