diff options
Diffstat (limited to 'drivers/usb/storage/Kconfig')
| -rw-r--r-- | drivers/usb/storage/Kconfig | 48 |
1 files changed, 35 insertions, 13 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 9df6887..8a372ba 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,8 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" -comment "see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" +comment "also be needed; see USB_STORAGE Help for more info" depends on USB config USB_STORAGE @@ -32,21 +32,25 @@ config USB_STORAGE_DEBUG verbose debugging messages. config USB_STORAGE_DATAFAB - bool "Datafab Compact Flash Reader support" + tristate "Datafab Compact Flash Reader support" depends on USB_STORAGE help Support for certain Datafab CompactFlash readers. Datafab has a web page at <http://www.datafabusa.com/>. + If this driver is compiled as a module, it will be named ums-datafab. + config USB_STORAGE_FREECOM - bool "Freecom USB/ATAPI Bridge support" + tristate "Freecom USB/ATAPI Bridge support" depends on USB_STORAGE help Support for the Freecom USB to IDE/ATAPI adaptor. Freecom has a web page at <http://www.freecom.de/>. + If this driver is compiled as a module, it will be named ums-freecom. + config USB_STORAGE_ISD200 - bool "ISD-200 USB/ATA Bridge support" + tristate "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based @@ -61,8 +65,10 @@ config USB_STORAGE_ISD200 - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + If this driver is compiled as a module, it will be named ums-isd200. + config USB_STORAGE_USBAT - bool "USBAT/USBAT02-based storage support" + tristate "USBAT/USBAT02-based storage support" depends on USB_STORAGE help Say Y here to include additional code to support storage devices @@ -82,30 +88,38 @@ config USB_STORAGE_USBAT - RCA LYRA MP3 portable - Sandisk ImageMate SDDR-05b + If this driver is compiled as a module, it will be named ums-usbat. + config USB_STORAGE_SDDR09 - bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" + tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-09 SmartMedia reader in the USB Mass Storage driver. Also works for the Microtech Zio! CompactFlash/SmartMedia reader. + If this driver is compiled as a module, it will be named ums-sddr09. + config USB_STORAGE_SDDR55 - bool "SanDisk SDDR-55 SmartMedia support" + tristate "SanDisk SDDR-55 SmartMedia support" depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-55 SmartMedia reader in the USB Mass Storage driver. + If this driver is compiled as a module, it will be named ums-sddr55. + config USB_STORAGE_JUMPSHOT - bool "Lexar Jumpshot Compact Flash Reader" + tristate "Lexar Jumpshot Compact Flash Reader" depends on USB_STORAGE help Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. + If this driver is compiled as a module, it will be named ums-jumpshot. + config USB_STORAGE_ALAUDA - bool "Olympus MAUSB-10/Fuji DPC-R1 support" + tristate "Olympus MAUSB-10/Fuji DPC-R1 support" depends on USB_STORAGE help Say Y here to include additional code to support the Olympus MAUSB-10 @@ -114,8 +128,10 @@ config USB_STORAGE_ALAUDA These devices are based on the Alauda chip and support both XD and SmartMedia cards. + If this driver is compiled as a module, it will be named ums-alauda. + config USB_STORAGE_ONETOUCH - bool "Support OneTouch Button on Maxtor Hard Drives" + tristate "Support OneTouch Button on Maxtor Hard Drives" depends on USB_STORAGE depends on INPUT=y || INPUT=USB_STORAGE help @@ -127,8 +143,10 @@ config USB_STORAGE_ONETOUCH this input in any keybinding software. (e.g. gnome's keyboard short- cuts) + If this driver is compiled as a module, it will be named ums-onetouch. + config USB_STORAGE_KARMA - bool "Support for Rio Karma music player" + tristate "Support for Rio Karma music player" depends on USB_STORAGE help Say Y here to include additional code to support the Rio Karma @@ -139,8 +157,10 @@ config USB_STORAGE_KARMA on the resulting scsi device node returns the Karma to normal operation. + If this driver is compiled as a module, it will be named ums-karma. + config USB_STORAGE_CYPRESS_ATACB - bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" + tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE ---help--- Say Y here if you want to use SAT (ata pass through) on devices based @@ -150,6 +170,8 @@ config USB_STORAGE_CYPRESS_ATACB If you say no here your device will still work with the standard usb mass storage class. + If this driver is compiled as a module, it will be named ums-cypress. + config USB_LIBUSUAL bool "The shared table of common (or usual) storage devices" depends on USB |