summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/Makefile2
-rw-r--r--drivers/usb/core/hcd.c4
-rw-r--r--drivers/usb/core/hub.c58
-rw-r--r--drivers/usb/core/sysfs.c6
-rw-r--r--drivers/usb/core/usb.c6
-rw-r--r--drivers/usb/early/ehci-dbgp.c2
-rw-r--r--drivers/usb/gadget/audio.c1
-rw-r--r--drivers/usb/gadget/f_audio.c15
-rw-r--r--drivers/usb/gadget/u_audio.c12
-rw-r--r--drivers/usb/gadget/u_audio.h2
-rw-r--r--drivers/usb/misc/appledisplay.c5
-rw-r--r--drivers/usb/misc/emi62.c2
-rw-r--r--drivers/usb/musb/blackfin.c134
-rw-r--r--drivers/usb/musb/blackfin.h2
-rw-r--r--drivers/usb/musb/cppi_dma.c6
-rw-r--r--drivers/usb/musb/davinci.c2
-rw-r--r--drivers/usb/musb/musb_core.c14
-rw-r--r--drivers/usb/musb/musb_gadget.c13
-rw-r--r--drivers/usb/musb/musb_gadget_ep0.c14
-rw-r--r--drivers/usb/otg/isp1301_omap.c4
-rw-r--r--drivers/usb/serial/ftdi_sio.c1
-rw-r--r--drivers/usb/serial/ftdi_sio.h959
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h986
-rw-r--r--drivers/usb/serial/mos7840.c7
-rw-r--r--drivers/usb/serial/option.c5
25 files changed, 1200 insertions, 1062 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 473aa1a..be3c9b8 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -44,5 +44,3 @@ obj-y += early/
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
-
-obj-$(CONFIG_USB_ULPI) += otg/
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6dac3b8..0495fa6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1597,7 +1597,9 @@ rescan:
}
/**
- * Check whether a new bandwidth setting exceeds the bus bandwidth.
+ * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
+ * the bus bandwidth
+ * @udev: target &usb_device
* @new_config: new configuration to install
* @cur_alt: the current alternate interface setting
* @new_alt: alternate interface setting that is being installed
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 06af970..0cec6ca 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1658,12 +1658,12 @@ static inline void announce_device(struct usb_device *udev) { }
#endif
/**
- * usb_configure_device_otg - FIXME (usbcore-internal)
+ * usb_enumerate_device_otg - FIXME (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
- * Do configuration for On-The-Go devices
+ * Finish enumeration for On-The-Go devices
*/
-static int usb_configure_device_otg(struct usb_device *udev)
+static int usb_enumerate_device_otg(struct usb_device *udev)
{
int err = 0;
@@ -1734,7 +1734,7 @@ fail:
/**
- * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal)
+ * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
* This is only called by usb_new_device() and usb_authorize_device()
@@ -1745,7 +1745,7 @@ fail:
* the string descriptors, as they will be errored out by the device
* until it has been authorized.
*/
-static int usb_configure_device(struct usb_device *udev)
+static int usb_enumerate_device(struct usb_device *udev)
{
int err;
@@ -1769,7 +1769,7 @@ static int usb_configure_device(struct usb_device *udev)
udev->descriptor.iManufacturer);
udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
}
- err = usb_configure_device_otg(udev);
+ err = usb_enumerate_device_otg(udev);
fail:
return err;
}
@@ -1779,8 +1779,8 @@ fail:
* usb_new_device - perform initial device setup (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
- * This is called with devices which have been enumerated, but not yet
- * configured. The device descriptor is available, but not descriptors
+ * This is called with devices which have been detected but not fully
+ * enumerated. The device descriptor is available, but not descriptors
* for any device configuration. The caller must have locked either
* the parent hub (if udev is a normal device) or else the
* usb_bus_list_lock (if udev is a root hub). The parent's pointer to
@@ -1803,8 +1803,8 @@ int usb_new_device(struct usb_device *udev)
if (udev->parent)
usb_autoresume_device(udev->parent);
- usb_detect_quirks(udev); /* Determine quirks */
- err = usb_configure_device(udev); /* detect & probe dev/intfs */
+ usb_detect_quirks(udev);
+ err = usb_enumerate_device(udev); /* Read descriptors */
if (err < 0)
goto fail;
dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
@@ -1849,21 +1849,23 @@ fail:
*/
int usb_deauthorize_device(struct usb_device *usb_dev)
{
- unsigned cnt;
usb_lock_device(usb_dev);
if (usb_dev->authorized == 0)
goto out_unauthorized;
+
usb_dev->authorized = 0;
usb_set_configuration(usb_dev, -1);
+
+ kfree(usb_dev->product);
usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ kfree(usb_dev->manufacturer);
usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ kfree(usb_dev->serial);
usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- kfree(usb_dev->config);
- usb_dev->config = NULL;
- for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++)
- kfree(usb_dev->rawdescriptors[cnt]);
+
+ usb_destroy_configuration(usb_dev);
usb_dev->descriptor.bNumConfigurations = 0;
- kfree(usb_dev->rawdescriptors);
+
out_unauthorized:
usb_unlock_device(usb_dev);
return 0;
@@ -1873,15 +1875,11 @@ out_unauthorized:
int usb_authorize_device(struct usb_device *usb_dev)
{
int result = 0, c;
+
usb_lock_device(usb_dev);
if (usb_dev->authorized == 1)
goto out_authorized;
- kfree(usb_dev->product);
- usb_dev->product = NULL;
- kfree(usb_dev->manufacturer);
- usb_dev->manufacturer = NULL;
- kfree(usb_dev->serial);
- usb_dev->serial = NULL;
+
result = usb_autoresume_device(usb_dev);
if (result < 0) {
dev_err(&usb_dev->dev,
@@ -1894,10 +1892,18 @@ int usb_authorize_device(struct usb_device *usb_dev)
"authorization: %d\n", result);
goto error_device_descriptor;
}
+
+ kfree(usb_dev->product);
+ usb_dev->product = NULL;
+ kfree(usb_dev->manufacturer);
+ usb_dev->manufacturer = NULL;
+ kfree(usb_dev->serial);
+ usb_dev->serial = NULL;
+
usb_dev->authorized = 1;
- result = usb_configure_device(usb_dev);
+ result = usb_enumerate_device(usb_dev);
if (result < 0)
- goto error_configure;
+ goto error_enumerate;
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
@@ -1912,8 +1918,10 @@ int usb_authorize_device(struct usb_device *usb_dev)
}
}
dev_info(&usb_dev->dev, "authorized to connect\n");
-error_configure:
+
+error_enumerate:
error_device_descriptor:
+ usb_autosuspend_device(usb_dev);
error_autoresume:
out_authorized:
usb_unlock_device(usb_dev); // complements locktree
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 1547700..485edf9 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -82,9 +82,13 @@ static ssize_t show_##name(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct usb_device *udev; \
+ int retval; \
\
udev = to_usb_device(dev); \
- return sprintf(buf, "%s\n", udev->name); \
+ usb_lock_device(udev); \
+ retval = sprintf(buf, "%s\n", udev->name); \
+ usb_unlock_device(udev); \
+ return retval; \
} \
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 2fb4204..0daff0d 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -66,9 +66,9 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
/**
* usb_find_alt_setting() - Given a configuration, find the alternate setting
* for the given interface.
- * @config - the configuration to search (not necessarily the current config).
- * @iface_num - interface number to search in
- * @alt_num - alternate interface setting number to search for.
+ * @config: the configuration to search (not necessarily the current config).
+ * @iface_num: interface number to search in
+ * @alt_num: alternate interface setting number to search for.
*
* Search the configuration's interface cache for the given alt setting.
*/
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 1206a26..2958a12 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -613,7 +613,7 @@ err:
}
EXPORT_SYMBOL_GPL(dbgp_external_startup);
-static int __init ehci_reset_port(int port)
+static int ehci_reset_port(int port)
{
u32 portsc;
u32 delay_time, delay;
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 58f2203..a62af7b 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -158,6 +158,7 @@ fail:
static int __exit audio_unbind(struct usb_composite_dev *cdev)
{
+ gaudio_cleanup();
return 0;
}
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index c43c89f..df77f61 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -56,13 +56,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = {
DECLARE_UAC_AC_HEADER_DESCRIPTOR(2);
#define UAC_DT_AC_HEADER_LENGTH UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
+/* 1 input terminal, 1 output terminal and 1 feature unit */
+#define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \
+ + UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0))
/* B.3.2 Class-Specific AC Interface Descriptor */
static struct uac_ac_header_descriptor_2 ac_header_desc = {
.bLength = UAC_DT_AC_HEADER_LENGTH,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_HEADER,
.bcdADC = __constant_cpu_to_le16(0x0100),
- .wTotalLength = __constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH),
+ .wTotalLength = __constant_cpu_to_le16(UAC_DT_TOTAL_LENGTH),
.bInCollection = F_AUDIO_NUM_INTERFACES,
.baInterfaceNr = {
[0] = F_AUDIO_AC_INTERFACE,
@@ -252,12 +255,12 @@ static struct f_audio_buf *f_audio_buffer_alloc(int buf_size)
copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC);
if (!copy_buf)
- return (struct f_audio_buf *)-ENOMEM;
+ return ERR_PTR(-ENOMEM);
copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC);
if (!copy_buf->buf) {
kfree(copy_buf);
- return (struct f_audio_buf *)-ENOMEM;
+ return ERR_PTR(-ENOMEM);
}
return copy_buf;
@@ -332,7 +335,7 @@ static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req)
list_add_tail(&copy_buf->list, &audio->play_queue);
schedule_work(&audio->playback_work);
copy_buf = f_audio_buffer_alloc(audio_buf_size);
- if (copy_buf < 0)
+ if (IS_ERR(copy_buf))
return -ENOMEM;
}
@@ -576,6 +579,8 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
usb_ep_enable(out_ep, audio->out_desc);
out_ep->driver_data = audio;
audio->copy_buf = f_audio_buffer_alloc(audio_buf_size);
+ if (IS_ERR(audio->copy_buf))
+ return -ENOMEM;
/*
* allocate a bunch of read buffers
@@ -787,7 +792,7 @@ int __init audio_bind_config(struct usb_configuration *c)
return status;
add_fail:
- gaudio_cleanup(&audio->card);
+ gaudio_cleanup();
setup_fail:
kfree(audio);
return status;
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
index 8252595..35e0930 100644
--- a/drivers/usb/gadget/u_audio.c
+++ b/drivers/usb/gadget/u_audio.c
@@ -288,6 +288,7 @@ static int gaudio_close_snd_dev(struct gaudio *gau)
return 0;
}
+static struct gaudio *the_card;
/**
* gaudio_setup - setup ALSA interface and preparing for USB transfer
*
@@ -303,6 +304,9 @@ int __init gaudio_setup(struct gaudio *card)
if (ret)
ERROR(card, "we need at least one control device\n");
+ if (!the_card)
+ the_card = card;
+
return ret;
}
@@ -312,9 +316,11 @@ int __init gaudio_setup(struct gaudio *card)
*
* This is called to free all resources allocated by @gaudio_setup().
*/
-void gaudio_cleanup(struct gaudio *card)
+void gaudio_cleanup(void)
{
- if (card)
- gaudio_close_snd_dev(card);
+ if (the_card) {
+ gaudio_close_snd_dev(the_card);
+ the_card = NULL;
+ }
}
diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h
index cc8d159..08ffce3 100644
--- a/drivers/usb/gadget/u_audio.h
+++ b/drivers/usb/gadget/u_audio.h
@@ -51,6 +51,6 @@ struct gaudio {
};
int gaudio_setup(struct gaudio *card);
-void gaudio_cleanup(struct gaudio *card);
+void gaudio_cleanup(void);
#endif /* __U_AUDIO_H */
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 1d8e39a..1eb9e41 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -60,6 +60,7 @@
static struct usb_device_id appledisplay_table [] = {
{ APPLEDISPLAY_DEVICE(0x9218) },
{ APPLEDISPLAY_DEVICE(0x9219) },
+ { APPLEDISPLAY_DEVICE(0x921c) },
{ APPLEDISPLAY_DEVICE(0x921d) },
/* Terminating entry */
@@ -72,8 +73,8 @@ struct appledisplay {
struct usb_device *udev; /* usb device */
struct urb *urb; /* usb request block */
struct backlight_device *bd; /* backlight device */
- char *urbdata; /* interrupt URB data buffer */
- char *msgdata; /* control message data buffer */
+ u8 *urbdata; /* interrupt URB data buffer */
+ u8 *msgdata; /* control message data buffer */
struct delayed_work work;
int button_pressed;
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 602ee05..59860b3 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -167,7 +167,7 @@ static int emi62_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
- } while (i > 0);
+ } while (rec);
/* Assert reset (stop the CPU in the EMI) */
err = emi62_set_reset(dev,1);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index fe4934d..ad26e65 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -29,6 +29,8 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
{
void __iomem *fifo = hw_ep->fifo;
void __iomem *epio = hw_ep->regs;
+ u8 epnum = hw_ep->epnum;
+ u16 dma_reg = 0;
prefetch((u8 *)src);
@@ -39,67 +41,113 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
dump_fifo_data(src, len);
- if (unlikely((unsigned long)src & 0x01))
- outsw_8((unsigned long)fifo, src,
- len & 0x01 ? (len >> 1) + 1 : len >> 1);
- else
- outsw((unsigned long)fifo, src,
- len & 0x01 ? (len >> 1) + 1 : len >> 1);
-}
+ if (!ANOMALY_05000380 && epnum != 0) {
+ flush_dcache_range((unsigned int)src,
+ (unsigned int)(src + len));
+
+ /* Setup DMA address register */
+ dma_reg = (u16) ((u32) src & 0xFFFF);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
+ SSYNC();
+
+ dma_reg = (u16) (((u32) src >> 16) & 0xFFFF);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
+ SSYNC();
+
+ /* Setup DMA count register */
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
+ SSYNC();
+
+ /* Enable the DMA */
+ dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION;
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
+ SSYNC();
+
+ /* Wait for compelete */
+ while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
+ cpu_relax();
+
+ /* acknowledge dma interrupt */
+ bfin_write_USB_DMA_INTERRUPT(1 << epnum);
+ SSYNC();
+
+ /* Reset DMA */
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
+ SSYNC();
+ } else {
+ SSYNC();
+
+ if (unlikely((unsigned long)src & 0x01))
+ outsw_8((unsigned long)fifo, src,
+ len & 0x01 ? (len >> 1) + 1 : len >> 1);
+ else
+ outsw((unsigned long)fifo, src,
+ len & 0x01 ? (len >> 1) + 1 : len >> 1);
+ }
+}
/*
* Unload an endpoint's FIFO
*/
void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
{
void __iomem *fifo = hw_ep->fifo;
-
-#ifdef CONFIG_BF52x
u8 epnum = hw_ep->epnum;
u16 dma_reg = 0;
- invalidate_dcache_range((unsigned int)dst,
- (unsigned int)(dst + len));
+ if (ANOMALY_05000467 && epnum != 0) {
- /* Setup DMA address register */
- dma_reg = (u16) ((u32) dst & 0xFFFF);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
- SSYNC();
+ invalidate_dcache_range((unsigned int)dst,
+ (unsigned int)(dst + len));
- dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
- SSYNC();
+ /* Setup DMA address register */
+ dma_reg = (u16) ((u32) dst & 0xFFFF);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
+ SSYNC();
- /* Setup DMA count register */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
- SSYNC();
+ dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
+ SSYNC();
- /* Enable the DMA */
- dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
- SSYNC();
+ /* Setup DMA count register */
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
+ SSYNC();
- /* Wait for compelete */
- while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
- cpu_relax();
+ /* Enable the DMA */
+ dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
+ SSYNC();
- /* acknowledge dma interrupt */
- bfin_write_USB_DMA_INTERRUPT(1 << epnum);
- SSYNC();
+ /* Wait for compelete */
+ while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
+ cpu_relax();
- /* Reset DMA */
- bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
- SSYNC();
-#else
- if (unlikely((unsigned long)dst & 0x01))
- insw_8((unsigned long)fifo, dst,
- len & 0x01 ? (len >> 1) + 1 : len >> 1);
- else
- insw((unsigned long)fifo, dst,
- len & 0x01 ? (len >> 1) + 1 : len >> 1);
-#endif
+ /* acknowledge dma interrupt */
+ bfin_write_USB_DMA_INTERRUPT(1 << epnum);
+ SSYNC();
+ /* Reset DMA */
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
+ SSYNC();
+ } else {
+ SSYNC();
+ /* Read the last byte of packet with odd size from address fifo + 4
+ * to trigger 1 byte access to EP0 FIFO.
+ */
+ if (len == 1)
+ *dst = (u8)inw((unsigned long)fifo + 4);
+ else {
+ if (unlikely((unsigned long)dst & 0x01))
+ insw_8((unsigned long)fifo, dst, len >> 1);
+ else
+ insw((unsigned long)fifo, dst, len >> 1);
+
+ if (len & 0x01)
+ *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
+ }
+ }
DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
'R', hw_ep->epnum, fifo, len, dst);
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
index 10b7d75..bd9352a 100644
--- a/drivers/usb/musb/blackfin.h
+++ b/drivers/usb/musb/blackfin.h
@@ -69,7 +69,6 @@ static void dump_fifo_data(u8 *buf, u16 len)
#define dump_fifo_data(buf, len) do {} while (0)
#endif
-#ifdef CONFIG_BF52x
#define USB_DMA_BASE USB_DMA_INTERRUPT
#define USB_DMAx_CTRL 0x04
@@ -79,7 +78,6 @@ static void dump_fifo_data(u8 *buf, u16 len)
#define USB_DMAx_COUNT_HIGH 0x14
#define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg)
-#endif
/* Almost 1 second */
#define TIMER_DELAY (1 * HZ)
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index ef2332a..a44a450 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1154,8 +1154,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
struct musb_hw_ep *hw_ep = NULL;
u32 rx, tx;
int i, index;
+ unsigned long flags;
cppi = container_of(musb->dma_controller, struct cppi, controller);
+ if (cppi->irq)
+ spin_lock_irqsave(&musb->lock, flags);
tibase = musb->ctrl_base;
@@ -1285,6 +1288,9 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
/* write to CPPI EOI register to re-enable interrupts */
musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+ if (cppi->irq)
+ spin_unlock_irqrestore(&musb->lock, flags);
+
return IRQ_HANDLED;
}
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index e16ff60..6691381 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -42,7 +42,7 @@
#include "musb_core.h"
#ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV 144
+#define GPIO_nVBUS_DRV 160
#endif
#include "davinci.h"
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index bfe08f4..5eb9318 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1319,7 +1319,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
#endif
u8 reg;
char *type;
- char aInfo[78], aRevision[32], aDate[12];
+ char aInfo[90], aRevision[32], aDate[12];
void __iomem *mbase = musb->mregs;
int status = 0;
int i;
@@ -1521,6 +1521,14 @@ irqreturn_t musb_interrupt(struct musb *musb)
(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
musb->int_usb, musb->int_tx, musb->int_rx);
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+ if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
+ if (!musb->gadget_driver) {
+ DBG(5, "No gadget driver loaded\n");
+ return IRQ_HANDLED;
+ }
+#endif
+
/* the core can interrupt us for multiple reasons; docs have
* a generic interrupt flowchart to follow
*/
@@ -2139,7 +2147,7 @@ static int __init musb_probe(struct platform_device *pdev)
return musb_init_controller(dev, irq, base);
}
-static int __devexit musb_remove(struct platform_device *pdev)
+static int __exit musb_remove(struct platform_device *pdev)
{
struct musb *musb = dev_to_musb(&pdev->dev);
void __iomem *ctrl_base = musb->ctrl_base;
@@ -2231,7 +2239,7 @@ static struct platform_driver musb_driver = {
.owner = THIS_MODULE,
.pm = MUSB_DEV_PM_OPS,
},
- .remove = __devexit_p(musb_remove),
+ .remove = __exit_p(musb_remove),
.shutdown = musb_shutdown,
};
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index c49b9ba..cbcf14a2 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -309,7 +309,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
size_t request_size;
/* setup DMA, then program endpoint CSR */
- request_size = min(request->length,
+ request_size = min_t(size_t, request->length,
musb_ep->dma->max_len);
if (request_size < musb_ep->packet_sz)
musb_ep->dma->desired_mode = 0;
@@ -319,7 +319,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
use_dma = use_dma && c->channel_program(
musb_ep->dma, musb_ep->packet_sz,
musb_ep->dma->desired_mode,
- request->dma, request_size);
+ request->dma + request->actual, request_size);
if (use_dma) {
if (musb_ep->dma->desired_mode == 0) {
/*
@@ -515,12 +515,12 @@ void musb_g_tx(struct musb *musb, u8 epnum)
if (csr & MUSB_TXCSR_FIFONOTEMPTY)
return;
- if (!musb_ep->desc) {
+ request = musb_ep->desc ? next_request(musb_ep) : NULL;
+ if (!request) {
DBG(4, "%s idle now\n",
musb_ep->end_point.name);
return;
- } else
- request = next_request(musb_ep);
+ }
}
txstate(musb, to_musb_request(request));
@@ -746,6 +746,8 @@ void musb_g_rx(struct musb *musb, u8 epnum)
musb_ep_select(mbase, epnum);
request = next_request(musb_ep);
+ if (!request)
+ return;
csr = musb_readw(epio, MUSB_RXCSR);
dma = is_dma_capable() ? musb_ep->dma : NULL;
@@ -1731,6 +1733,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
spin_lock_irqsave(&musb->lock, flags);
otg_set_peripheral(musb->xceiv, &musb->g);
+ musb->xceiv->state = OTG_STATE_B_IDLE;
musb->is_active = 1;
/* FIXME this ignores the softconnect flag. Drivers are
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 8fba3f1..53d0645 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -664,7 +664,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
break;
default:
- ERR("SetupEnd came in a wrong ep0stage %s",
+ ERR("SetupEnd came in a wrong ep0stage %s\n",
decode_ep0stage(musb->ep0_state));
}
csr = musb_readw(regs, MUSB_CSR0);
@@ -787,12 +787,18 @@ setup:
handled = service_zero_data_request(
musb, &setup);
+ /*
+ * We're expecting no data in any case, so
+ * always set the DATAEND bit -- doing this
+ * here helps avoid SetupEnd interrupt coming
+ * in the idle stage when we're stalling...
+ */
+ musb->ackpend |= MUSB_CSR0_P_DATAEND;
+
/* status stage might be immediate */
- if (handled > 0) {
- musb->ackpend |= MUSB_CSR0_P_DATAEND;
+ if (handled > 0)
musb->ep0_state =
MUSB_EP0_STAGE_STATUSIN;
- }
break;
/* sequence #1 (IN to host), includes GET_STATUS
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index d54460a..78a2097 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -843,7 +843,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
static struct platform_device *otg_dev;
-static int otg_init(struct isp1301 *isp)
+static int isp1301_otg_init(struct isp1301 *isp)
{
u32 l;
@@ -1275,7 +1275,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c)
static int isp1301_otg_enable(struct isp1301 *isp)
{
power_up(isp);
- otg_init(isp);
+ isp1301_otg_init(isp);
/* NOTE: since we don't change this, this provides
* a few more interrupts than are strictly needed.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f99498f..216f187 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -44,6 +44,7 @@
#include <linux/serial.h>
#include <linux/usb/serial.h>
#include "ftdi_sio.h"
+#include "ftdi_sio_ids.h"
/*
* Version Information
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 4586a24..b0e0d64 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -1,7 +1,10 @@
/*
- * Definitions for the FTDI USB Single Port Serial Converter -
+ * Driver definitions for the FTDI USB Single Port Serial Converter -
* known as FTDI_SIO (Serial Input/Output application of the chipset)
*
+ * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h
+ *
+ *
* The example I have is known as the USC-1000 which is available from
* http://www.dse.co.nz - cat no XH4214 It looks similar to this:
* http://www.dansdata.com/usbser.htm but I can't be sure There are other
@@ -17,880 +20,7 @@
* Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
* FTDI_SIO implementation.
*
- * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
- * from Rudolf Gugler
- *
- */
-
-#define FTDI_VID 0x0403 /* Vendor Id */
-#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
-#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
-#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
-#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
-#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
-#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
-#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
-#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
-#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
-#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
-
-/* Larsen and Brusgaard AltiTrack/USBtrack */
-#define LARSENBRUSGAARD_VID 0x0FD8
-#define LB_ALTITRACK_PID 0x0001
-
-/* www.canusb.com Lawicel CANUSB device */
-#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
-
-/* AlphaMicro Components AMC-232USB01 device */
-#define FTDI_AMC232_PID 0xFF00 /* Product Id */
-
-/* www.candapter.com Ewert Energy Systems CANdapter device */
-#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
-
-/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
-/* the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
-#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
-#define FTDI_SCS_DEVICE_2_PID 0xD012
-#define FTDI_SCS_DEVICE_3_PID 0xD013
-#define FTDI_SCS_DEVICE_4_PID 0xD014
-#define FTDI_SCS_DEVICE_5_PID 0xD015
-#define FTDI_SCS_DEVICE_6_PID 0xD016
-#define FTDI_SCS_DEVICE_7_PID 0xD017
-
-/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
-#define FTDI_ACTZWAVE_PID 0xF2D0
-
-
-/* www.starting-point-systems.com µChameleon device */
-#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
-
-/* www.irtrans.de device */
-#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
-
-
-/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
-#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
-
-/* iPlus device */
-#define FTDI_IPLUS_PID 0xD070 /* Product Id */
-#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
-
-/* DMX4ALL DMX Interfaces */
-#define FTDI_DMX4ALL 0xC850
-
-/* OpenDCC (www.opendcc.de) product id */
-#define FTDI_OPENDCC_PID 0xBFD8
-#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
-#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
-#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
-
-/* Sprog II (Andrew Crosland's SprogII DCC interface) */
-#define FTDI_SPROG_II 0xF0C8
-
-/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
-/* they use the ftdi chipset for the USB interface and the vendor id is the same */
-#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
-#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
-#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
-#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
-#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
-#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
-#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
-#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
-
-/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
-/* broadband internet service. The following PID is exhibited by the usb device supplied */
-/* (the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
-
-/*
- * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
- * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
- * (the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_PCDJ_DAC2_PID 0xFA88
-
-/*
- * The following are the values for the Matrix Orbital LCD displays,
- * which are the FT232BM ( similar to the 8U232AM )
- */
-#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
-
-/* OOCDlink by Joern Kaipf <joernk@web.de>
- * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
-#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
-
-/*
- * The following are the values for the Matrix Orbital FTDI Range
- * Anything in this range will use an FT232RL.
- */
-#define MTXORB_VID 0x1B3D
-#define MTXORB_FTDI_RANGE_0100_PID 0x0100
-#define MTXORB_FTDI_RANGE_0101_PID 0x0101
-#define MTXORB_FTDI_RANGE_0102_PID 0x0102
-#define MTXORB_FTDI_RANGE_0103_PID 0x0103
-#define MTXORB_FTDI_RANGE_0104_PID 0x0104
-#define MTXORB_FTDI_RANGE_0105_PID 0x0105
-#define MTXORB_FTDI_RANGE_0106_PID 0x0106
-#define MTXORB_FTDI_RANGE_0107_PID 0x0107
-#define MTXORB_FTDI_RANGE_0108_PID 0x0108
-#define MTXORB_FTDI_RANGE_0109_PID 0x0109
-#define MTXORB_FTDI_RANGE_010A_PID 0x010A
-#define MTXORB_FTDI_RANGE_010B_PID 0x010B
-#define MTXORB_FTDI_RANGE_010C_PID 0x010C
-#define MTXORB_FTDI_RANGE_010D_PID 0x010D
-#define MTXORB_FTDI_RANGE_010E_PID 0x010E
-#define MTXORB_FTDI_RANGE_010F_PID 0x010F
-#define MTXORB_FTDI_RANGE_0110_PID 0x0110
-#define MTXORB_FTDI_RANGE_0111_PID 0x0111
-#define MTXORB_FTDI_RANGE_0112_PID 0x0112
-#define MTXORB_FTDI_RANGE_0113_PID 0x0113
-#define MTXORB_FTDI_RANGE_0114_PID 0x0114
-#define MTXORB_FTDI_RANGE_0115_PID 0x0115
-#define MTXORB_FTDI_RANGE_0116_PID 0x0116
-#define MTXORB_FTDI_RANGE_0117_PID 0x0117
-#define MTXORB_FTDI_RANGE_0118_PID 0x0118
-#define MTXORB_FTDI_RANGE_0119_PID 0x0119
-#define MTXORB_FTDI_RANGE_011A_PID 0x011A
-#define MTXORB_FTDI_RANGE_011B_PID 0x011B
-#define MTXORB_FTDI_RANGE_011C_PID 0x011C
-#define MTXORB_FTDI_RANGE_011D_PID 0x011D
-#define MTXORB_FTDI_RANGE_011E_PID 0x011E
-#define MTXORB_FTDI_RANGE_011F_PID 0x011F
-#define MTXORB_FTDI_RANGE_0120_PID 0x0120
-#define MTXORB_FTDI_RANGE_0121_PID 0x0121
-#define MTXORB_FTDI_RANGE_0122_PID 0x0122
-#define MTXORB_FTDI_RANGE_0123_PID 0x0123
-#define MTXORB_FTDI_RANGE_0124_PID 0x0124
-#define MTXORB_FTDI_RANGE_0125_PID 0x0125
-#define MTXORB_FTDI_RANGE_0126_PID 0x0126
-#define MTXORB_FTDI_RANGE_0127_PID 0x0127
-#define MTXORB_FTDI_RANGE_0128_PID 0x0128
-#define MTXORB_FTDI_RANGE_0129_PID 0x0129
-#define MTXORB_FTDI_RANGE_012A_PID 0x012A
-#define MTXORB_FTDI_RANGE_012B_PID 0x012B
-#define MTXORB_FTDI_RANGE_012C_PID 0x012C
-#define MTXORB_FTDI_RANGE_012D_PID 0x012D
-#define MTXORB_FTDI_RANGE_012E_PID 0x012E
-#define MTXORB_FTDI_RANGE_012F_PID 0x012F
-#define MTXORB_FTDI_RANGE_0130_PID 0x0130
-#define MTXORB_FTDI_RANGE_0131_PID 0x0131
-#define MTXORB_FTDI_RANGE_0132_PID 0x0132
-#define MTXORB_FTDI_RANGE_0133_PID 0x0133
-#define MTXORB_FTDI_RANGE_0134_PID 0x0134
-#define MTXORB_FTDI_RANGE_0135_PID 0x0135
-#define MTXORB_FTDI_RANGE_0136_PID 0x0136
-#define MTXORB_FTDI_RANGE_0137_PID 0x0137
-#define MTXORB_FTDI_RANGE_0138_PID 0x0138
-#define MTXORB_FTDI_RANGE_0139_PID 0x0139
-#define MTXORB_FTDI_RANGE_013A_PID 0x013A
-#define MTXORB_FTDI_RANGE_013B_PID 0x013B
-#define MTXORB_FTDI_RANGE_013C_PID 0x013C
-#define MTXORB_FTDI_RANGE_013D_PID 0x013D
-#define MTXORB_FTDI_RANGE_013E_PID 0x013E
-#define MTXORB_FTDI_RANGE_013F_PID 0x013F
-#define MTXORB_FTDI_RANGE_0140_PID 0x0140
-#define MTXORB_FTDI_RANGE_0141_PID 0x0141
-#define MTXORB_FTDI_RANGE_0142_PID 0x0142
-#define MTXORB_FTDI_RANGE_0143_PID 0x0143
-#define MTXORB_FTDI_RANGE_0144_PID 0x0144
-#define MTXORB_FTDI_RANGE_0145_PID 0x0145
-#define MTXORB_FTDI_RANGE_0146_PID 0x0146
-#define MTXORB_FTDI_RANGE_0147_PID 0x0147
-#define MTXORB_FTDI_RANGE_0148_PID 0x0148
-#define MTXORB_FTDI_RANGE_0149_PID 0x0149
-#define MTXORB_FTDI_RANGE_014A_PID 0x014A
-#define MTXORB_FTDI_RANGE_014B_PID 0x014B
-#define MTXORB_FTDI_RANGE_014C_PID 0x014C
-#define MTXORB_FTDI_RANGE_014D_PID 0x014D
-#define MTXORB_FTDI_RANGE_014E_PID 0x014E
-#define MTXORB_FTDI_RANGE_014F_PID 0x014F
-#define MTXORB_FTDI_RANGE_0150_PID 0x0150
-#define MTXORB_FTDI_RANGE_0151_PID 0x0151
-#define MTXORB_FTDI_RANGE_0152_PID 0x0152
-#define MTXORB_FTDI_RANGE_0153_PID 0x0153
-#define MTXORB_FTDI_RANGE_0154_PID 0x0154
-#define MTXORB_FTDI_RANGE_0155_PID 0x0155
-#define MTXORB_FTDI_RANGE_0156_PID 0x0156
-#define MTXORB_FTDI_RANGE_0157_PID 0x0157
-#define MTXORB_FTDI_RANGE_0158_PID 0x0158
-#define MTXORB_FTDI_RANGE_0159_PID 0x0159
-#define MTXORB_FTDI_RANGE_015A_PID 0x015A
-#define MTXORB_FTDI_RANGE_015B_PID 0x015B
-#define MTXORB_FTDI_RANGE_015C_PID 0x015C
-#define MTXORB_FTDI_RANGE_015D_PID 0x015D
-#define MTXORB_FTDI_RANGE_015E_PID 0x015E
-#define MTXORB_FTDI_RANGE_015F_PID 0x015F
-#define MTXORB_FTDI_RANGE_0160_PID 0x0160
-#define MTXORB_FTDI_RANGE_0161_PID 0x0161
-#define MTXORB_FTDI_RANGE_0162_PID 0x0162
-#define MTXORB_FTDI_RANGE_0163_PID 0x0163
-#define MTXORB_FTDI_RANGE_0164_PID 0x0164
-#define MTXORB_FTDI_RANGE_0165_PID 0x0165
-#define MTXORB_FTDI_RANGE_0166_PID 0x0166
-#define MTXORB_FTDI_RANGE_0167_PID 0x0167
-#define MTXORB_FTDI_RANGE_0168_PID 0x0168
-#define MTXORB_FTDI_RANGE_0169_PID 0x0169
-#define MTXORB_FTDI_RANGE_016A_PID 0x016A
-#define MTXORB_FTDI_RANGE_016B_PID 0x016B
-#define MTXORB_FTDI_RANGE_016C_PID 0x016C
-#define MTXORB_FTDI_RANGE_016D_PID 0x016D
-#define MTXORB_FTDI_RANGE_016E_PID 0x016E
-#define MTXORB_FTDI_RANGE_016F_PID 0x016F
-#define MTXORB_FTDI_RANGE_0170_PID 0x0170
-#define MTXORB_FTDI_RANGE_0171_PID 0x0171
-#define MTXORB_FTDI_RANGE_0172_PID 0x0172
-#define MTXORB_FTDI_RANGE_0173_PID 0x0173
-#define MTXORB_FTDI_RANGE_0174_PID 0x0174
-#define MTXORB_FTDI_RANGE_0175_PID 0x0175
-#define MTXORB_FTDI_RANGE_0176_PID 0x0176
-#define MTXORB_FTDI_RANGE_0177_PID 0x0177
-#define MTXORB_FTDI_RANGE_0178_PID 0x0178
-#define MTXORB_FTDI_RANGE_0179_PID 0x0179
-#define MTXORB_FTDI_RANGE_017A_PID 0x017A
-#define MTXORB_FTDI_RANGE_017B_PID 0x017B
-#define MTXORB_FTDI_RANGE_017C_PID 0x017C
-#define MTXORB_FTDI_RANGE_017D_PID 0x017D
-#define MTXORB_FTDI_RANGE_017E_PID 0x017E
-#define MTXORB_FTDI_RANGE_017F_PID 0x017F
-#define MTXORB_FTDI_RANGE_0180_PID 0x0180
-#define MTXORB_FTDI_RANGE_0181_PID 0x0181
-#define MTXORB_FTDI_RANGE_0182_PID 0x0182
-#define MTXORB_FTDI_RANGE_0183_PID 0x0183
-#define MTXORB_FTDI_RANGE_0184_PID 0x0184
-#define MTXORB_FTDI_RANGE_0185_PID 0x0185
-#define MTXORB_FTDI_RANGE_0186_PID 0x0186
-#define MTXORB_FTDI_RANGE_0187_PID 0x0187
-#define MTXORB_FTDI_RANGE_0188_PID 0x0188
-#define MTXORB_FTDI_RANGE_0189_PID 0x0189
-#define MTXORB_FTDI_RANGE_018A_PID 0x018A
-#define MTXORB_FTDI_RANGE_018B_PID 0x018B
-#define MTXORB_FTDI_RANGE_018C_PID 0x018C
-#define MTXORB_FTDI_RANGE_018D_PID 0x018D
-#define MTXORB_FTDI_RANGE_018E_PID 0x018E
-#define MTXORB_FTDI_RANGE_018F_PID 0x018F
-#define MTXORB_FTDI_RANGE_0190_PID 0x0190
-#define MTXORB_FTDI_RANGE_0191_PID 0x0191
-#define MTXORB_FTDI_RANGE_0192_PID 0x0192
-#define MTXORB_FTDI_RANGE_0193_PID 0x0193
-#define MTXORB_FTDI_RANGE_0194_PID 0x0194
-#define MTXORB_FTDI_RANGE_0195_PID 0x0195
-#define MTXORB_FTDI_RANGE_0196_PID 0x0196
-#define MTXORB_FTDI_RANGE_0197_PID 0x0197
-#define MTXORB_FTDI_RANGE_0198_PID 0x0198
-#define MTXORB_FTDI_RANGE_0199_PID 0x0199
-#define MTXORB_FTDI_RANGE_019A_PID 0x019A
-#define MTXORB_FTDI_RANGE_019B_PID 0x019B
-#define MTXORB_FTDI_RANGE_019C_PID 0x019C
-#define MTXORB_FTDI_RANGE_019D_PID 0x019D
-#define MTXORB_FTDI_RANGE_019E_PID 0x019E
-#define MTXORB_FTDI_RANGE_019F_PID 0x019F
-#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
-#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
-#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
-#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
-#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
-#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
-#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
-#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
-#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
-#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
-#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
-#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
-#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
-#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
-#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
-#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
-#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
-#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
-#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
-#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
-#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
-#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
-#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
-#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
-#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
-#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
-#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
-#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
-#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
-#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
-#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
-#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
-#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
-#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
-#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
-#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
-#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
-#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
-#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
-#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
-#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
-#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
-#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
-#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
-#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
-#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
-#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
-#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
-#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
-#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
-#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
-#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
-#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
-#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
-#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
-#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
-#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
-#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
-#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
-#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
-#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
-#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
-#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
-#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
-#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
-#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
-#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
-#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
-#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
-#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
-#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
-#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
-#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
-#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
-#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
-#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
-#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
-#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
-#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
-#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
-#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
-#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
-#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
-#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
-#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
-#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
-#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
-#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
-#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
-#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
-#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
-#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
-#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
-#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
-#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
-#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
-
-
-
-/* Interbiometrics USB I/O Board */
-/* Developed for Interbiometrics by Rudolf Gugler */
-#define INTERBIOMETRICS_VID 0x1209
-#define INTERBIOMETRICS_IOBOARD_PID 0x1002
-#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
-
-/*
- * The following are the values for the Perle Systems
- * UltraPort USB serial converters
- */
-#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
-
-/*
- * The following are the values for the Sealevel SeaLINK+ adapters.
- * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
- * removed some PIDs that don't seem to match any existing products.)
- */
-#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
-#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
-#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
-#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
-#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
-#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
-#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
-#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
-#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
-#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
-#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
-#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
-#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
-#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
-#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
-#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
-#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
-#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
-#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
-#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
-#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
-#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
-#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
-#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
-#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
-#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
-#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
-#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
-#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
-#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
-#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
-#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
-#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
-#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
-#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
-#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
-#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
-#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
-#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
-#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
-#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
-#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
-#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
-#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
-#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
-#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
-#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
-#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
-
-/*
- * The following are the values for two KOBIL chipcard terminals.
- */
-#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
-#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
-#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
-
-/*
- * Icom ID-1 digital transceiver
- */
-
-#define ICOM_ID1_VID 0x0C26
-#define ICOM_ID1_PID 0x0004
-
-/*
- * ASK.fr devices
- */
-#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
-
-/*
- * FTDI USB UART chips used in construction projects from the
- * Elektor Electronics magazine (http://elektor-electronics.co.uk)
- */
-#define ELEKTOR_VID 0x0C7D
-#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
-
-/*
- * DSS-20 Sync Station for Sony Ericsson P800
- */
-#define FTDI_DSS20_PID 0xFC82
-
-/*
- * Home Electronics (www.home-electro.com) USB gadgets
- */
-#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
-
-/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
-/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
-#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
-
-/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
-
-#define FTDI_TNC_X_PID 0xEBE0
-
-/*
- * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
- * All of these devices use FTDI's vendor ID (0x0403).
- *
- * The previously included PID for the UO 100 module was incorrect.
- * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
- *
- * Armin Laeuger originally sent the PID for the UM 100 module.
- */
-#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
-#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
-#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
-#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
-#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
-/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
- * MS Windows, rather than the FTDI Virtual Com Port drivers.
- * Maybe these will be easier to use with the libftdi/libusb user-space
- * drivers, or possibly the Comedi drivers in some cases. */
-#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
-#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
-#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
-#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
-#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
-#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
-#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
-#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
-#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
-#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
-#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
-#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
-#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
-#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
-#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
-#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
-#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
-#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
-#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
-#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
-#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
-
-/*
- * Definitions for ID TECH (www.idt-net.com) devices
- */
-#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
-#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
-
-/*
- * Definitions for Omnidirectional Control Technology, Inc. devices
- */
-#define OCT_VID 0x0B39 /* OCT vendor ID */
-/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
-/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
-/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
-#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
-
-/* an infrared receiver for user access control with IR tags */
-#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
-
-/*
- * Definitions for Artemis astronomical USB based cameras
- * Check it at http://www.artemisccd.co.uk/
- */
-#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
-
-/*
- * Definitions for ATIK Instruments astronomical USB based cameras
- * Check it at http://www.atik-instruments.com/
- */
-#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
-#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
-#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
-#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
-#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
-
-/*
- * Protego product ids
- */
-#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
-#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
-#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
-#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
-
-/*
- * Gude Analog- und Digitalsysteme GmbH
- */
-#define FTDI_GUDEADS_E808_PID 0xE808
-#define FTDI_GUDEADS_E809_PID 0xE809
-#define FTDI_GUDEADS_E80A_PID 0xE80A
-#define FTDI_GUDEADS_E80B_PID 0xE80B
-#define FTDI_GUDEADS_E80C_PID 0xE80C
-#define FTDI_GUDEADS_E80D_PID 0xE80D
-#define FTDI_GUDEADS_E80E_PID 0xE80E
-#define FTDI_GUDEADS_E80F_PID 0xE80F
-#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
-#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
-#define FTDI_GUDEADS_E88A_PID 0xE88A
-#define FTDI_GUDEADS_E88B_PID 0xE88B
-#define FTDI_GUDEADS_E88C_PID 0xE88C
-#define FTDI_GUDEADS_E88D_PID 0xE88D
-#define FTDI_GUDEADS_E88E_PID 0xE88E
-#define FTDI_GUDEADS_E88F_PID 0xE88F
-
-/*
- * Linx Technologies product ids
- */
-#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
-#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
-#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
-#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
-#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
-
-/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
-/* unit for PIC16's/PIC18's */
-#define FTDI_CCSICDU20_0_PID 0xF9D0
-#define FTDI_CCSICDU40_1_PID 0xF9D1
-#define FTDI_CCSMACHX_2_PID 0xF9D2
-#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
-#define FTDI_CCSICDU64_4_PID 0xF9D4
-#define FTDI_CCSPRIME8_5_PID 0xF9D5
-
-/* Inside Accesso contactless reader (http://www.insidefr.com) */
-#define INSIDE_ACCESSO 0xFAD0
-
-/*
- * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
- */
-#define INTREPID_VID 0x093C
-#define INTREPID_VALUECAN_PID 0x0601
-#define INTREPID_NEOVI_PID 0x0701
-
-/*
- * Falcom Wireless Communications GmbH
- */
-#define FALCOM_VID 0x0F94 /* Vendor Id */
-#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
-#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
-
-/*
- * SUUNTO product ids
- */
-#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
-
-/*
- * Oceanic product ids
- */
-#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
-
-/*
- * TTi (Thurlby Thandar Instruments)
- */
-#define TTI_VID 0x103E /* Vendor Id */
-#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
-
-/*
- * Definitions for B&B Electronics products.
- */
-#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
-#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
-#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
-#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
-#define BANDB_USOPTL4_PID 0xAC11
-#define BANDB_USPTL4_PID 0xAC12
-#define BANDB_USO9ML2DR_2_PID 0xAC16
-#define BANDB_USO9ML2DR_PID 0xAC17
-#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
-#define BANDB_USOPTL4DR_PID 0xAC19
-#define BANDB_485USB9F_2W_PID 0xAC25
-#define BANDB_485USB9F_4W_PID 0xAC26
-#define BANDB_232USB9M_PID 0xAC27
-#define BANDB_485USBTB_2W_PID 0xAC33
-#define BANDB_485USBTB_4W_PID 0xAC34
-#define BANDB_TTL5USB9M_PID 0xAC49
-#define BANDB_TTL3USB9M_PID 0xAC50
-#define BANDB_ZZ_PROG1_USB_PID 0xBA02
-
-/*
- * RM Michaelides CANview USB (http://www.rmcan.com)
- * CAN fieldbus interface adapter, added by port GmbH www.port.de)
- * Ian Abbott changed the macro names for consistency.
- */
-#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
-
-/*
- * EVER Eco Pro UPS (http://www.ever.com.pl/)
- */
-
-#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
-
-/*
- * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
- * and I'm not entirely sure which are used by which.
- */
-#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
-#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
-
-/*
- * Mobility Electronics products.
- */
-#define MOBILITY_VID 0x1342
-#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
-
-/*
- * microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
- * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
- * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
- */
-#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
-#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
-#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
-#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
-#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
-#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
-#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
-#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
-
-/*
- * Active Robots product ids.
- */
-#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
-
-/*
- * Xsens Technologies BV products (http://www.xsens.com).
- */
-#define XSENS_CONVERTER_0_PID 0xD388
-#define XSENS_CONVERTER_1_PID 0xD389
-#define XSENS_CONVERTER_2_PID 0xD38A
-#define XSENS_CONVERTER_3_PID 0xD38B
-#define XSENS_CONVERTER_4_PID 0xD38C
-#define XSENS_CONVERTER_5_PID 0xD38D
-#define XSENS_CONVERTER_6_PID 0xD38E
-#define XSENS_CONVERTER_7_PID 0xD38F
-
-/*
- * Teratronik product ids.
- * Submitted by O. Wölfelschneider.
- */
-#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
-#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
-
-/*
- * Evolution Robotics products (http://www.evolution.com/).
- * Submitted by Shawn M. Lavelle.
- */
-#define EVOLUTION_VID 0xDEEE /* Vendor ID */
-#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
-#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
-#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
-#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
-
-/* Pyramid Computer GmbH */
-#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
-
-/*
- * NDI (www.ndigital.com) product ids
- */
-#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
-#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
-#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
-#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
-#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
-
-/*
- * Posiflex inc retail equipment (http://www.posiflex.com.tw)
- */
-#define POSIFLEX_VID 0x0d3a /* Vendor ID */
-#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
-
-/*
- * Westrex International devices submitted by Cory Lee
- */
-#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
-#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
-
-/*
- * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
- */
-#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
-
-/*
- * Eclo (http://www.eclo.pt/) product IDs.
- * PID 0xEA90 submitted by Martin Grill.
- */
-#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
-
-/*
- * Papouch products (http://www.papouch.com/)
- * Submitted by Folkert van Heusden
- */
-
-#define PAPOUCH_VID 0x5050 /* Vendor ID */
-#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
-#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
-
-/*
- * ACG Identification Technologies GmbH products (http://www.acg.de/).
- * Submitted by anton -at- goto10 -dot- org.
*/
-#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
-
-/*
- * Yost Engineering, Inc. products (www.yostengineering.com).
- * PID 0xE050 submitted by Aaron Prose.
- */
-#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
-
-/*
- * ThorLabs USB motor drivers
- */
-#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
-
-/*
- * Testo products (http://www.testo.com/)
- * Submitted by Colin Leroy
- */
-#define TESTO_VID 0x128D
-#define TESTO_USB_INTERFACE_PID 0x0001
-
-/*
- * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
- */
-#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
-
-/*
- * Tactrix OpenPort (ECU) devices.
- * OpenPort 1.3M submitted by Donour Sizemore.
- * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
- */
-#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
-#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
-#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
-
-/*
- * Telldus Technologies
- */
-#define TELLDUS_VID 0x1781 /* Vendor ID */
-#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
-
-/*
- * IBS elektronik product ids
- * Submitted by Thomas Schleusener
- */
-#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
-#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
-#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
-#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
-#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
-#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
-#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
-#define FTDI_IBS_PROD_PID 0xff3f /* future device */
-
-/*
- * MaxStream devices www.maxstream.net
- */
-#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
-
-/* Olimex */
-#define OLIMEX_VID 0x15BA
-#define OLIMEX_ARM_USB_OCD_PID 0x0003
-
-/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
-/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
-#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
-#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
-
-/* www.elsterelectricity.com Elster Unicom III Optical Probe */
-#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
-
-/*
- * The Mobility Lab (TML)
- * Submitted by Pierre Castella
- */
-#define TML_VID 0x1B91 /* Vendor ID */
-#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
-
-/* Propox devices */
-#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
-
-/* Rig Expert Ukraine devices */
-#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
-
-/* Domintell products http://www.domintell.com */
-#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
-#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
-
-/* Alti-2 products http://www.alti-2.com */
-#define ALTI2_VID 0x1BC9
-#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
@@ -910,86 +40,6 @@
#define INTERFACE_C 3
#define INTERFACE_D 4
-/*
- * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
- * Submitted by Harald Welte <laforge@openmoko.org>
- */
-#define FIC_VID 0x1457
-#define FIC_NEO1973_DEBUG_PID 0x5118
-
-/*
- * RATOC REX-USB60F
- */
-#define RATOC_VENDOR_ID 0x0584
-#define RATOC_PRODUCT_ID_USB60F 0xb020
-
-/*
- * DIEBOLD BCS SE923
- */
-#define DIEBOLD_BCS_SE923_PID 0xfb99
-
-/*
- * Atmel STK541
- */
-#define ATMEL_VID 0x03eb /* Vendor ID */
-#define STK541_PID 0x2109 /* Zigbee Controller */
-
-/*
- * Dresden Elektronic Sensor Terminal Board
- */
-#define DE_VID 0x1cf1 /* Vendor ID */
-#define STB_PID 0x0001 /* Sensor Terminal Board */
-#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
-
-/*
- * Blackfin gnICE JTAG
- * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
- */
-#define ADI_VID 0x0456
-#define ADI_GNICE_PID 0xF000
-#define ADI_GNICEPLUS_PID 0xF001
-
-/*
- * JETI SPECTROMETER SPECBOS 1201
- * http://www.jeti.com/products/sys/scb/scb1201.php
- */
-#define JETI_VID 0x0c6c
-#define JETI_SPC1201_PID 0x04b2
-
-/*
- * Marvell SheevaPlug
- */
-#define MARVELL_VID 0x9e88
-#define MARVELL_SHEEVAPLUG_PID 0x9e8f
-
-#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
-
-/*
- * GN Otometrics (http://www.otometrics.com)
- * Submitted by Ville Sundberg.
- */
-#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
-#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
-
-/*
- * Bayer Ascensia Contour blood glucose meter USB-converter cable.
- * http://winglucofacts.com/cables/
- */
-#define BAYER_VID 0x1A79
-#define BAYER_CONTOUR_CABLE_PID 0x6001
-
-/*
- * Marvell OpenRD Base, Client
- * http://www.open-rd.org
- * OpenRD Base, Client use VID 0x0403
- */
-#define MARVELL_OPENRD_PID 0x9e90
-
-/*
- * Hameg HO820 and HO870 interface (using VID 0x0403)
- */
-#define HAMEG_HO820_PID 0xed74
-#define HAMEG_HO870_PID 0xed71
/*
* BmRequestType: 1100 0000b
@@ -1504,4 +554,3 @@ typedef enum {
* B2..7 Length of message - (not including Byte 0)
*
*/
-
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
new file mode 100644
index 0000000..da92b49
--- /dev/null
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -0,0 +1,986 @@
+/*
+ * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
+ * Please keep numerically sorted within individual areas, thanks!
+ *
+ * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
+ * from Rudolf Gugler
+ *
+ */
+
+
+/**********************************/
+/***** devices using FTDI VID *****/
+/**********************************/
+
+
+#define FTDI_VID 0x0403 /* Vendor Id */
+
+
+/*** "original" FTDI device PIDs ***/
+
+#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
+#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
+#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
+
+
+/*** third-party PIDs (using FTDI_VID) ***/
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID 0x9e90
+
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
+/* OOCDlink by Joern Kaipf <joernk@web.de>
+ * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
+#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
+
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
+
+#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
+/* OpenDCC (www.opendcc.de) product id */
+#define FTDI_OPENDCC_PID 0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
+
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
+
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
+/*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
+
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
+
+/*
+ * Tactrix OpenPort (ECU) devices.
+ * OpenPort 1.3M submitted by Donour Sizemore.
+ * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
+ */
+#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
+#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
+#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
+
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
+
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
+
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
+
+/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_CONVERTER_0_PID 0xD388
+#define XSENS_CONVERTER_1_PID 0xD389
+#define XSENS_CONVERTER_2_PID 0xD38A
+#define XSENS_CONVERTER_3_PID 0xD38B
+#define XSENS_CONVERTER_4_PID 0xD38C
+#define XSENS_CONVERTER_5_PID 0xD38D
+#define XSENS_CONVERTER_6_PID 0xD38E
+#define XSENS_CONVERTER_7_PID 0xD38F
+
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
+
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
+
+/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
+#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
+
+/*
+ * Yost Engineering, Inc. products (www.yostengineering.com).
+ * PID 0xE050 submitted by Aaron Prose.
+ */
+#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
+
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * All of these devices use FTDI's vendor ID (0x0403).
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
+#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
+#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
+#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
+#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
+#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
+#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
+#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
+#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
+
+/*
+ * EVER Eco Pro UPS (http://www.ever.com.pl/)
+ */
+
+#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
+
+/*
+ * Active Robots product ids.
+ */
+#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
+
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
+
+/* www.elsterelectricity.com Elster Unicom III Optical Probe */
+#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
+
+/*
+ * Gude Analog- und Digitalsysteme GmbH
+ */
+#define FTDI_GUDEADS_E808_PID 0xE808
+#define FTDI_GUDEADS_E809_PID 0xE809
+#define FTDI_GUDEADS_E80A_PID 0xE80A
+#define FTDI_GUDEADS_E80B_PID 0xE80B
+#define FTDI_GUDEADS_E80C_PID 0xE80C
+#define FTDI_GUDEADS_E80D_PID 0xE80D
+#define FTDI_GUDEADS_E80E_PID 0xE80E
+#define FTDI_GUDEADS_E80F_PID 0xE80F
+#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
+#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
+#define FTDI_GUDEADS_E88A_PID 0xE88A
+#define FTDI_GUDEADS_E88B_PID 0xE88B
+#define FTDI_GUDEADS_E88C_PID 0xE88C
+#define FTDI_GUDEADS_E88D_PID 0xE88D
+#define FTDI_GUDEADS_E88E_PID 0xE88E
+#define FTDI_GUDEADS_E88F_PID 0xE88F
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
+
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+#define FTDI_TNC_X_PID 0xEBE0
+
+/*
+ * Teratronik product ids.
+ * Submitted by O. Wölfelschneider.
+ */
+#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
+#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
+
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
+
+/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define HAMEG_HO820_PID 0xed74
+#define HAMEG_HO870_PID 0xed71
+
+/*
+ * MaxStream devices www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
+
+/*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
+ */
+#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
+#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
+
+/* Domintell products http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
+#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
+
+/*
+ * The following are the values for the Perle Systems
+ * UltraPort USB serial converters
+ */
+#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
+
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II 0xF0C8
+
+/* an infrared receiver for user access control with IR tags */
+#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
+
+/* ACT Solutions HomePro ZWave interface
+ (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID 0xF2D0
+
+/*
+ * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
+ * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
+ * and I'm not entirely sure which are used by which.
+ */
+#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
+#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
+
+/*
+ * Linx Technologies product ids
+ */
+#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
+#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
+#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
+#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
+
+/*
+ * Oceanic product ids
+ */
+#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
+
+/*
+ * SUUNTO product ids
+ */
+#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
+
+/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
+/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
+#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
+
+/* CCS Inc. ICDU/ICDU40 product ID -
+ * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
+#define FTDI_CCSICDU20_0_PID 0xF9D0
+#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSMACHX_2_PID 0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID 0xF9D4
+#define FTDI_CCSPRIME8_5_PID 0xF9D5
+
+/*
+ * The following are the values for the Matrix Orbital LCD displays,
+ * which are the FT232BM ( similar to the 8U232AM )
+ */
+#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
+
+/*
+ * Home Electronics (www.home-electro.com) USB gadgets
+ */
+#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
+
+/* Inside Accesso contactless reader (http://www.insidefr.com) */
+#define INSIDE_ACCESSO 0xFAD0
+
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
+#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
+#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
+#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
+
+/*
+ * DSS-20 Sync Station for Sony Ericsson P800
+ */
+#define FTDI_DSS20_PID 0xFC82
+
+/* www.irtrans.de device */
+#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/*
+ * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
+ * CAN fieldbus interface adapter, added by port GmbH www.port.de)
+ * Ian Abbott changed the macro names for consistency.
+ */
+#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
+#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */
+
+#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
+
+/*
+ * PCDJ use ftdi based dj-controllers. The following PID is
+ * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
+ * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
+ */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */
+
+/*
+ * DIEBOLD BCS SE923 (FTDI_VID)
+ */
+#define DIEBOLD_BCS_SE923_PID 0xfb99
+
+/* www.crystalfontz.com devices
+ * - thanx for providing free devices for evaluation !
+ * they use the ftdi chipset for the USB interface
+ * and the vendor id is the same
+ */
+#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
+#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
+#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
+#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
+#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
+#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
+#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
+#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
+
+/*
+ * Video Networks Limited / Homechoice in the UK use an ftdi-based device
+ * for their 1Mb broadband internet service. The following PID is exhibited
+ * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
+ */
+#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
+/*
+ * IBS elektronik product ids (FTDI_VID)
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
+#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
+#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
+#define FTDI_IBS_PROD_PID 0xff3f /* future device */
+/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+
+
+/********************************/
+/** third-party VID/PID combos **/
+/********************************/
+
+
+
+/*
+ * Atmel STK541
+ */
+#define ATMEL_VID 0x03eb /* Vendor ID */
+#define STK541_PID 0x2109 /* Zigbee Controller */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID 0x0456
+#define ADI_GNICE_PID 0xF000
+#define ADI_GNICEPLUS_PID 0xF001
+
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID 0x0584
+#define RATOC_PRODUCT_ID_USB60F 0xb020
+
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
+#define BANDB_USOPTL4_PID 0xAC11
+#define BANDB_USPTL4_PID 0xAC12
+#define BANDB_USO9ML2DR_2_PID 0xAC16
+#define BANDB_USO9ML2DR_PID 0xAC17
+#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
+#define BANDB_USOPTL4DR_PID 0xAC19
+#define BANDB_485USB9F_2W_PID 0xAC25
+#define BANDB_485USB9F_4W_PID 0xAC26
+#define BANDB_232USB9M_PID 0xAC27
+#define BANDB_485USBTB_2W_PID 0xAC33
+#define BANDB_485USBTB_4W_PID 0xAC34
+#define BANDB_TTL5USB9M_PID 0xAC49
+#define BANDB_TTL3USB9M_PID 0xAC50
+#define BANDB_ZZ_PROG1_USB_PID 0xBA02
+
+/*
+ * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
+ */
+#define INTREPID_VID 0x093C
+#define INTREPID_VALUECAN_PID 0x0601
+#define INTREPID_NEOVI_PID 0x0701
+
+/*
+ * Definitions for ID TECH (www.idt-net.com) devices
+ */
+#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
+#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
+
+/*
+ * Definitions for Omnidirectional Control Technology, Inc. devices
+ */
+#define OCT_VID 0x0B39 /* OCT vendor ID */
+/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
+/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
+/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
+
+/*
+ * Icom ID-1 digital transceiver
+ */
+
+#define ICOM_ID1_VID 0x0C26
+#define ICOM_ID1_PID 0x0004
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
+#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
+
+/*
+ * The following are the values for the Sealevel SeaLINK+ adapters.
+ * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
+ * removed some PIDs that don't seem to match any existing products.)
+ */
+#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
+#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
+#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
+#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
+#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
+#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
+#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
+#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
+#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
+#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
+#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
+#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
+#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
+#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
+#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
+#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
+#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
+#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
+#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
+#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
+#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
+#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
+#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
+#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
+#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
+#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
+#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
+#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
+#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
+#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
+#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
+#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
+#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
+#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
+#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
+#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
+#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
+#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
+#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
+#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
+#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
+#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
+
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID 0x0c6c
+#define JETI_SPC1201_PID 0x04b2
+
+/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://elektor-electronics.co.uk)
+ */
+#define ELEKTOR_VID 0x0C7D
+#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
+
+/*
+ * Posiflex inc retail equipment (http://www.posiflex.com.tw)
+ */
+#define POSIFLEX_VID 0x0d3a /* Vendor ID */
+#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
+
+/*
+ * The following are the values for two KOBIL chipcard terminals.
+ */
+#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
+#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
+#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
+
+#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
+#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+
+/*
+ * Falcom Wireless Communications GmbH
+ */
+#define FALCOM_VID 0x0F94 /* Vendor Id */
+#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
+
+/* Larsen and Brusgaard AltiTrack/USBtrack */
+#define LARSENBRUSGAARD_VID 0x0FD8
+#define LB_ALTITRACK_PID 0x0001
+
+/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID 0x103E /* Vendor Id */
+#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
+
+/* Interbiometrics USB I/O Board */
+/* Developed for Interbiometrics by Rudolf Gugler */
+#define INTERBIOMETRICS_VID 0x1209
+#define INTERBIOMETRICS_IOBOARD_PID 0x1002
+#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID 0x128D
+#define TESTO_USB_INTERFACE_PID 0x0001
+
+/*
+ * Mobility Electronics products.
+ */
+#define MOBILITY_VID 0x1342
+#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
+
+/*
+ * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
+ * Submitted by Harald Welte <laforge@openmoko.org>
+ */
+#define FIC_VID 0x1457
+#define FIC_NEO1973_DEBUG_PID 0x5118
+
+/* Olimex */
+#define OLIMEX_VID 0x15BA
+#define OLIMEX_ARM_USB_OCD_PID 0x0003
+
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID 0x1781 /* Vendor ID */
+#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID 0x1A79
+#define BAYER_CONTOUR_CABLE_PID 0x6001
+
+/*
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
+ */
+#define MTXORB_VID 0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID 0x0100
+#define MTXORB_FTDI_RANGE_0101_PID 0x0101
+#define MTXORB_FTDI_RANGE_0102_PID 0x0102
+#define MTXORB_FTDI_RANGE_0103_PID 0x0103
+#define MTXORB_FTDI_RANGE_0104_PID 0x0104
+#define MTXORB_FTDI_RANGE_0105_PID 0x0105
+#define MTXORB_FTDI_RANGE_0106_PID 0x0106
+#define MTXORB_FTDI_RANGE_0107_PID 0x0107
+#define MTXORB_FTDI_RANGE_0108_PID 0x0108
+#define MTXORB_FTDI_RANGE_0109_PID 0x0109
+#define MTXORB_FTDI_RANGE_010A_PID 0x010A
+#define MTXORB_FTDI_RANGE_010B_PID 0x010B
+#define MTXORB_FTDI_RANGE_010C_PID 0x010C
+#define MTXORB_FTDI_RANGE_010D_PID 0x010D
+#define MTXORB_FTDI_RANGE_010E_PID 0x010E
+#define MTXORB_FTDI_RANGE_010F_PID 0x010F
+#define MTXORB_FTDI_RANGE_0110_PID 0x0110
+#define MTXORB_FTDI_RANGE_0111_PID 0x0111
+#define MTXORB_FTDI_RANGE_0112_PID 0x0112
+#define MTXORB_FTDI_RANGE_0113_PID 0x0113
+#define MTXORB_FTDI_RANGE_0114_PID 0x0114
+#define MTXORB_FTDI_RANGE_0115_PID 0x0115
+#define MTXORB_FTDI_RANGE_0116_PID 0x0116
+#define MTXORB_FTDI_RANGE_0117_PID 0x0117
+#define MTXORB_FTDI_RANGE_0118_PID 0x0118
+#define MTXORB_FTDI_RANGE_0119_PID 0x0119
+#define MTXORB_FTDI_RANGE_011A_PID 0x011A
+#define MTXORB_FTDI_RANGE_011B_PID 0x011B
+#define MTXORB_FTDI_RANGE_011C_PID 0x011C
+#define MTXORB_FTDI_RANGE_011D_PID 0x011D
+#define MTXORB_FTDI_RANGE_011E_PID 0x011E
+#define MTXORB_FTDI_RANGE_011F_PID 0x011F
+#define MTXORB_FTDI_RANGE_0120_PID 0x0120
+#define MTXORB_FTDI_RANGE_0121_PID 0x0121
+#define MTXORB_FTDI_RANGE_0122_PID 0x0122
+#define MTXORB_FTDI_RANGE_0123_PID 0x0123
+#define MTXORB_FTDI_RANGE_0124_PID 0x0124
+#define MTXORB_FTDI_RANGE_0125_PID 0x0125
+#define MTXORB_FTDI_RANGE_0126_PID 0x0126
+#define MTXORB_FTDI_RANGE_0127_PID 0x0127
+#define MTXORB_FTDI_RANGE_0128_PID 0x0128
+#define MTXORB_FTDI_RANGE_0129_PID 0x0129
+#define MTXORB_FTDI_RANGE_012A_PID 0x012A
+#define MTXORB_FTDI_RANGE_012B_PID 0x012B
+#define MTXORB_FTDI_RANGE_012C_PID 0x012C
+#define MTXORB_FTDI_RANGE_012D_PID 0x012D
+#define MTXORB_FTDI_RANGE_012E_PID 0x012E
+#define MTXORB_FTDI_RANGE_012F_PID 0x012F
+#define MTXORB_FTDI_RANGE_0130_PID 0x0130
+#define MTXORB_FTDI_RANGE_0131_PID 0x0131
+#define MTXORB_FTDI_RANGE_0132_PID 0x0132
+#define MTXORB_FTDI_RANGE_0133_PID 0x0133
+#define MTXORB_FTDI_RANGE_0134_PID 0x0134
+#define MTXORB_FTDI_RANGE_0135_PID 0x0135
+#define MTXORB_FTDI_RANGE_0136_PID 0x0136
+#define MTXORB_FTDI_RANGE_0137_PID 0x0137
+#define MTXORB_FTDI_RANGE_0138_PID 0x0138
+#define MTXORB_FTDI_RANGE_0139_PID 0x0139
+#define MTXORB_FTDI_RANGE_013A_PID 0x013A
+#define MTXORB_FTDI_RANGE_013B_PID 0x013B
+#define MTXORB_FTDI_RANGE_013C_PID 0x013C
+#define MTXORB_FTDI_RANGE_013D_PID 0x013D
+#define MTXORB_FTDI_RANGE_013E_PID 0x013E
+#define MTXORB_FTDI_RANGE_013F_PID 0x013F
+#define MTXORB_FTDI_RANGE_0140_PID 0x0140
+#define MTXORB_FTDI_RANGE_0141_PID 0x0141
+#define MTXORB_FTDI_RANGE_0142_PID 0x0142
+#define MTXORB_FTDI_RANGE_0143_PID 0x0143
+#define MTXORB_FTDI_RANGE_0144_PID 0x0144
+#define MTXORB_FTDI_RANGE_0145_PID 0x0145
+#define MTXORB_FTDI_RANGE_0146_PID 0x0146
+#define MTXORB_FTDI_RANGE_0147_PID 0x0147
+#define MTXORB_FTDI_RANGE_0148_PID 0x0148
+#define MTXORB_FTDI_RANGE_0149_PID 0x0149
+#define MTXORB_FTDI_RANGE_014A_PID 0x014A
+#define MTXORB_FTDI_RANGE_014B_PID 0x014B
+#define MTXORB_FTDI_RANGE_014C_PID 0x014C
+#define MTXORB_FTDI_RANGE_014D_PID 0x014D
+#define MTXORB_FTDI_RANGE_014E_PID 0x014E
+#define MTXORB_FTDI_RANGE_014F_PID 0x014F
+#define MTXORB_FTDI_RANGE_0150_PID 0x0150
+#define MTXORB_FTDI_RANGE_0151_PID 0x0151
+#define MTXORB_FTDI_RANGE_0152_PID 0x0152
+#define MTXORB_FTDI_RANGE_0153_PID 0x0153
+#define MTXORB_FTDI_RANGE_0154_PID 0x0154
+#define MTXORB_FTDI_RANGE_0155_PID 0x0155
+#define MTXORB_FTDI_RANGE_0156_PID 0x0156
+#define MTXORB_FTDI_RANGE_0157_PID 0x0157
+#define MTXORB_FTDI_RANGE_0158_PID 0x0158
+#define MTXORB_FTDI_RANGE_0159_PID 0x0159
+#define MTXORB_FTDI_RANGE_015A_PID 0x015A
+#define MTXORB_FTDI_RANGE_015B_PID 0x015B
+#define MTXORB_FTDI_RANGE_015C_PID 0x015C
+#define MTXORB_FTDI_RANGE_015D_PID 0x015D
+#define MTXORB_FTDI_RANGE_015E_PID 0x015E
+#define MTXORB_FTDI_RANGE_015F_PID 0x015F
+#define MTXORB_FTDI_RANGE_0160_PID 0x0160
+#define MTXORB_FTDI_RANGE_0161_PID 0x0161
+#define MTXORB_FTDI_RANGE_0162_PID 0x0162
+#define MTXORB_FTDI_RANGE_0163_PID 0x0163
+#define MTXORB_FTDI_RANGE_0164_PID 0x0164
+#define MTXORB_FTDI_RANGE_0165_PID 0x0165
+#define MTXORB_FTDI_RANGE_0166_PID 0x0166
+#define MTXORB_FTDI_RANGE_0167_PID 0x0167
+#define MTXORB_FTDI_RANGE_0168_PID 0x0168
+#define MTXORB_FTDI_RANGE_0169_PID 0x0169
+#define MTXORB_FTDI_RANGE_016A_PID 0x016A
+#define MTXORB_FTDI_RANGE_016B_PID 0x016B
+#define MTXORB_FTDI_RANGE_016C_PID 0x016C
+#define MTXORB_FTDI_RANGE_016D_PID 0x016D
+#define MTXORB_FTDI_RANGE_016E_PID 0x016E
+#define MTXORB_FTDI_RANGE_016F_PID 0x016F
+#define MTXORB_FTDI_RANGE_0170_PID 0x0170
+#define MTXORB_FTDI_RANGE_0171_PID 0x0171
+#define MTXORB_FTDI_RANGE_0172_PID 0x0172
+#define MTXORB_FTDI_RANGE_0173_PID 0x0173
+#define MTXORB_FTDI_RANGE_0174_PID 0x0174
+#define MTXORB_FTDI_RANGE_0175_PID 0x0175
+#define MTXORB_FTDI_RANGE_0176_PID 0x0176
+#define MTXORB_FTDI_RANGE_0177_PID 0x0177
+#define MTXORB_FTDI_RANGE_0178_PID 0x0178
+#define MTXORB_FTDI_RANGE_0179_PID 0x0179
+#define MTXORB_FTDI_RANGE_017A_PID 0x017A
+#define MTXORB_FTDI_RANGE_017B_PID 0x017B
+#define MTXORB_FTDI_RANGE_017C_PID 0x017C
+#define MTXORB_FTDI_RANGE_017D_PID 0x017D
+#define MTXORB_FTDI_RANGE_017E_PID 0x017E
+#define MTXORB_FTDI_RANGE_017F_PID 0x017F
+#define MTXORB_FTDI_RANGE_0180_PID 0x0180
+#define MTXORB_FTDI_RANGE_0181_PID 0x0181
+#define MTXORB_FTDI_RANGE_0182_PID 0x0182
+#define MTXORB_FTDI_RANGE_0183_PID 0x0183
+#define MTXORB_FTDI_RANGE_0184_PID 0x0184
+#define MTXORB_FTDI_RANGE_0185_PID 0x0185
+#define MTXORB_FTDI_RANGE_0186_PID 0x0186
+#define MTXORB_FTDI_RANGE_0187_PID 0x0187
+#define MTXORB_FTDI_RANGE_0188_PID 0x0188
+#define MTXORB_FTDI_RANGE_0189_PID 0x0189
+#define MTXORB_FTDI_RANGE_018A_PID 0x018A
+#define MTXORB_FTDI_RANGE_018B_PID 0x018B
+#define MTXORB_FTDI_RANGE_018C_PID 0x018C
+#define MTXORB_FTDI_RANGE_018D_PID 0x018D
+#define MTXORB_FTDI_RANGE_018E_PID 0x018E
+#define MTXORB_FTDI_RANGE_018F_PID 0x018F
+#define MTXORB_FTDI_RANGE_0190_PID 0x0190
+#define MTXORB_FTDI_RANGE_0191_PID 0x0191
+#define MTXORB_FTDI_RANGE_0192_PID 0x0192
+#define MTXORB_FTDI_RANGE_0193_PID 0x0193
+#define MTXORB_FTDI_RANGE_0194_PID 0x0194
+#define MTXORB_FTDI_RANGE_0195_PID 0x0195
+#define MTXORB_FTDI_RANGE_0196_PID 0x0196
+#define MTXORB_FTDI_RANGE_0197_PID 0x0197
+#define MTXORB_FTDI_RANGE_0198_PID 0x0198
+#define MTXORB_FTDI_RANGE_0199_PID 0x0199
+#define MTXORB_FTDI_RANGE_019A_PID 0x019A
+#define MTXORB_FTDI_RANGE_019B_PID 0x019B
+#define MTXORB_FTDI_RANGE_019C_PID 0x019C
+#define MTXORB_FTDI_RANGE_019D_PID 0x019D
+#define MTXORB_FTDI_RANGE_019E_PID 0x019E
+#define MTXORB_FTDI_RANGE_019F_PID 0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
+
+
+
+/*
+ * The Mobility Lab (TML)
+ * Submitted by Pierre Castella
+ */
+#define TML_VID 0x1B91 /* Vendor ID */
+#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
+
+/* Alti-2 products http://www.alti-2.com */
+#define ALTI2_VID 0x1BC9
+#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
+
+/*
+ * Dresden Elektronic Sensor Terminal Board
+ */
+#define DE_VID 0x1cf1 /* Vendor ID */
+#define STB_PID 0x0001 /* Sensor Terminal Board */
+#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID 0x5050 /* Vendor ID */
+#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
+#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID 0x9e88
+#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID 0xDEEE /* Vendor ID */
+#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
+#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
+#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 485fa9c..2cfe245 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -127,8 +127,9 @@
#define BANDB_DEVICE_ID_US9ML2_4 0xAC30
#define BANDB_DEVICE_ID_USPTL4_2 0xAC31
#define BANDB_DEVICE_ID_USPTL4_4 0xAC32
-#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
-#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
+#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
+#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24
/* This driver also supports
* ATEN UC2324 device using Moschip MCS7840
@@ -191,6 +192,7 @@ static struct usb_device_id moschip_port_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
@@ -207,6 +209,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9a2b903..6e94a67 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -340,6 +340,10 @@ static int option_resume(struct usb_serial *serial);
#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+/* Haier products */
+#define HAIER_VENDOR_ID 0x201e
+#define HAIER_PRODUCT_CE100 0x2009
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -641,6 +645,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
+ { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
generated by cgit v0.10.2 at 2024-11-19 09:14:30 (GMT)