summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/chipidea/core.c3
-rw-r--r--drivers/usb/chipidea/udc.c13
-rw-r--r--drivers/usb/host/ehci-platform.c6
-rw-r--r--drivers/usb/phy/Kconfig10
-rw-r--r--drivers/usb/phy/phy-rcar-usb.c128
-rw-r--r--drivers/usb/serial/f81232.c8
-rw-r--r--drivers/usb/serial/pl2303.c10
-rw-r--r--drivers/usb/serial/spcp8x5.c10
8 files changed, 116 insertions, 72 deletions
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 49b098b..475c9c1 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -276,8 +276,9 @@ static void ci_role_work(struct work_struct *work)
ci_role_stop(ci);
ci_role_start(ci, role);
- enable_irq(ci->irq);
}
+
+ enable_irq(ci->irq);
}
static irqreturn_t ci_irq(int irq, void *data)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 519ead2..b501346 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1678,8 +1678,11 @@ static int udc_start(struct ci13xxx *ci)
ci->gadget.ep0 = &ci->ep0in->ep;
- if (ci->global_phy)
+ if (ci->global_phy) {
ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (IS_ERR(ci->transceiver))
+ ci->transceiver = NULL;
+ }
if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
if (ci->transceiver == NULL) {
@@ -1694,7 +1697,7 @@ static int udc_start(struct ci13xxx *ci)
goto put_transceiver;
}
- if (!IS_ERR_OR_NULL(ci->transceiver)) {
+ if (ci->transceiver) {
retval = otg_set_peripheral(ci->transceiver->otg,
&ci->gadget);
if (retval)
@@ -1711,7 +1714,7 @@ static int udc_start(struct ci13xxx *ci)
return retval;
remove_trans:
- if (!IS_ERR_OR_NULL(ci->transceiver)) {
+ if (ci->transceiver) {
otg_set_peripheral(ci->transceiver->otg, NULL);
if (ci->global_phy)
usb_put_phy(ci->transceiver);
@@ -1719,7 +1722,7 @@ remove_trans:
dev_err(dev, "error = %i\n", retval);
put_transceiver:
- if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy)
+ if (ci->transceiver && ci->global_phy)
usb_put_phy(ci->transceiver);
destroy_eps:
destroy_eps(ci);
@@ -1747,7 +1750,7 @@ static void udc_stop(struct ci13xxx *ci)
dma_pool_destroy(ci->td_pool);
dma_pool_destroy(ci->qh_pool);
- if (!IS_ERR_OR_NULL(ci->transceiver)) {
+ if (ci->transceiver) {
otg_set_peripheral(ci->transceiver->otg, NULL);
if (ci->global_phy)
usb_put_phy(ci->transceiver);
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index f47f259..d1f5cea 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -48,6 +48,12 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
ehci->big_endian_desc = pdata->big_endian_desc;
ehci->big_endian_mmio = pdata->big_endian_mmio;
+ if (pdata->pre_setup) {
+ retval = pdata->pre_setup(hcd);
+ if (retval < 0)
+ return retval;
+ }
+
ehci->caps = hcd->regs + pdata->caps_offset;
retval = ehci_setup(hcd);
if (retval)
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7ef3eb8..13c09c2 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -180,15 +180,15 @@ config USB_MXS_PHY
MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
config USB_RCAR_PHY
- tristate "Renesas R-Car USB phy support"
+ tristate "Renesas R-Car USB PHY support"
depends on USB || USB_GADGET
help
- Say Y here to add support for the Renesas R-Car USB phy driver.
- This chip is typically used as USB phy for USB host, gadget.
- This driver supports: R8A7779
+ Say Y here to add support for the Renesas R-Car USB common PHY driver.
+ This chip is typically used as USB PHY for USB host, gadget.
+ This driver supports R8A7778 and R8A7779.
To compile this driver as a module, choose M here: the
- module will be called rcar-phy.
+ module will be called phy-rcar-usb.
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c
index a35681b..ae90940 100644
--- a/drivers/usb/phy/phy-rcar-usb.c
+++ b/drivers/usb/phy/phy-rcar-usb.c
@@ -1,8 +1,9 @@
/*
* Renesas R-Car USB phy driver
*
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,17 +16,41 @@
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/module.h>
-
-/* USBH common register */
-#define USBPCTRL0 0x0800
-#define USBPCTRL1 0x0804
-#define USBST 0x0808
-#define USBEH0 0x080C
-#define USBOH0 0x081C
-#define USBCTL0 0x0858
-#define EIIBC1 0x0094
-#define EIIBC2 0x009C
-
+#include <linux/platform_data/usb-rcar-phy.h>
+
+/* REGS block */
+#define USBPCTRL0 0x00
+#define USBPCTRL1 0x04
+#define USBST 0x08
+#define USBEH0 0x0C
+#define USBOH0 0x1C
+#define USBCTL0 0x58
+
+/* High-speed signal quality characteristic control registers (R8A7778 only) */
+#define HSQCTL1 0x24
+#define HSQCTL2 0x28
+
+/* USBPCTRL0 */
+#define OVC2 (1 << 10) /* (R8A7779 only) */
+ /* Switches the OVC input pin for port 2: */
+ /* 1: USB_OVC2, 0: OVC2 */
+#define OVC1_VBUS1 (1 << 9) /* Switches the OVC input pin for port 1: */
+ /* 1: USB_OVC1, 0: OVC1/VBUS1 */
+ /* Function mode: set to 0 */
+#define OVC0 (1 << 8) /* Switches the OVC input pin for port 0: */
+ /* 1: USB_OVC0 pin, 0: OVC0 */
+#define OVC2_ACT (1 << 6) /* (R8A7779 only) */
+ /* Host mode: OVC2 polarity: */
+ /* 1: active-high, 0: active-low */
+#define PENC (1 << 4) /* Function mode: output level of PENC1 pin: */
+ /* 1: high, 0: low */
+#define OVC0_ACT (1 << 3) /* Host mode: OVC0 polarity: */
+ /* 1: active-high, 0: active-low */
+#define OVC1_ACT (1 << 1) /* Host mode: OVC1 polarity: */
+ /* 1: active-high, 0: active-low */
+ /* Function mode: be sure to set to 1 */
+#define PORT1 (1 << 0) /* Selects port 1 mode: */
+ /* 1: function, 0: host */
/* USBPCTRL1 */
#define PHY_RST (1 << 2)
#define PLL_ENB (1 << 1)
@@ -58,8 +83,10 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
{
struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
struct device *dev = phy->dev;
+ struct rcar_phy_platform_data *pdata = dev->platform_data;
void __iomem *reg0 = priv->reg0;
void __iomem *reg1 = priv->reg1;
+ static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT };
int i;
u32 val;
unsigned long flags;
@@ -77,7 +104,16 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
/* (2) start USB-PHY internal PLL */
iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1));
- /* (3) USB module status check */
+ /* (3) set USB-PHY in accord with the conditions of usage */
+ if (reg1) {
+ u32 hsqctl1 = pdata->ferrite_bead ? 0x41 : 0;
+ u32 hsqctl2 = pdata->ferrite_bead ? 0x0d : 7;
+
+ iowrite32(hsqctl1, reg1 + HSQCTL1);
+ iowrite32(hsqctl2, reg1 + HSQCTL2);
+ }
+
+ /* (4) USB module status check */
for (i = 0; i < 1024; i++) {
udelay(10);
val = ioread32(reg0 + USBST);
@@ -90,24 +126,24 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
goto phy_init_end;
}
- /* (4) USB-PHY reset clear */
+ /* (5) USB-PHY reset clear */
iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
- /* set platform specific port settings */
- iowrite32(0x00000000, (reg0 + USBPCTRL0));
-
- /*
- * EHCI IP internal buffer setting
- * EHCI IP internal buffer enable
- *
- * These are recommended value of a datasheet
- * see [USB :: EHCI internal buffer setting]
- */
- iowrite32(0x00ff0040, (reg0 + EIIBC1));
- iowrite32(0x00ff0040, (reg1 + EIIBC1));
-
- iowrite32(0x00000001, (reg0 + EIIBC2));
- iowrite32(0x00000001, (reg1 + EIIBC2));
+ /* Board specific port settings */
+ val = 0;
+ if (pdata->port1_func)
+ val |= PORT1;
+ if (pdata->penc1)
+ val |= PENC;
+ for (i = 0; i < 3; i++) {
+ /* OVCn bits follow each other in the right order */
+ if (pdata->ovc_pin[i].select_3_3v)
+ val |= OVC0 << i;
+ /* OVCn_ACT bits are spaced by irregular intervals */
+ if (pdata->ovc_pin[i].active_high)
+ val |= ovcn_act[i];
+ }
+ iowrite32(val, (reg0 + USBPCTRL0));
/*
* Bus alignment settings
@@ -134,10 +170,8 @@ static void rcar_usb_phy_shutdown(struct usb_phy *phy)
spin_lock_irqsave(&priv->lock, flags);
- if (priv->counter-- == 1) { /* last user */
- iowrite32(0x00000000, (reg0 + USBPCTRL0));
+ if (priv->counter-- == 1) /* last user */
iowrite32(0x00000000, (reg0 + USBPCTRL1));
- }
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -147,27 +181,29 @@ static int rcar_usb_phy_probe(struct platform_device *pdev)
struct rcar_usb_phy_priv *priv;
struct resource *res0, *res1;
struct device *dev = &pdev->dev;
- void __iomem *reg0, *reg1;
+ void __iomem *reg0, *reg1 = NULL;
int ret;
+ if (!pdev->dev.platform_data) {
+ dev_err(dev, "No platform data\n");
+ return -EINVAL;
+ }
+
res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res0 || !res1) {
+ if (!res0) {
dev_err(dev, "Not enough platform resources\n");
return -EINVAL;
}
- /*
- * CAUTION
- *
- * Because this phy address is also mapped under OHCI/EHCI address area,
- * this driver can't use devm_request_and_ioremap(dev, res) here
- */
- reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0));
- reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1));
- if (!reg0 || !reg1) {
- dev_err(dev, "ioremap error\n");
- return -ENOMEM;
+ reg0 = devm_ioremap_resource(dev, res0);
+ if (IS_ERR(reg0))
+ return PTR_ERR(reg0);
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res1) {
+ reg1 = devm_ioremap_resource(dev, res1);
+ if (IS_ERR(reg1))
+ return PTR_ERR(reg1);
}
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 090b411..7d8dd5a 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -165,11 +165,12 @@ static void f81232_set_termios(struct tty_struct *tty,
/* FIXME - Stubbed out for now */
/* Don't change anything if nothing has changed */
- if (!tty_termios_hw_change(&tty->termios, old_termios))
+ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
/* Do the real work here... */
- tty_termios_copy_hw(&tty->termios, old_termios);
+ if (old_termios)
+ tty_termios_copy_hw(&tty->termios, old_termios);
}
static int f81232_tiocmget(struct tty_struct *tty)
@@ -187,12 +188,11 @@ static int f81232_tiocmset(struct tty_struct *tty,
static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
- struct ktermios tmp_termios;
int result;
/* Setup termios */
if (tty)
- f81232_set_termios(tty, port, &tmp_termios);
+ f81232_set_termios(tty, port, NULL);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 7151659..048cd44 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -284,7 +284,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
serial settings even to the same values as before. Thus
we actually need to filter in this specific case */
- if (!tty_termios_hw_change(&tty->termios, old_termios))
+ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
cflag = tty->termios.c_cflag;
@@ -293,7 +293,8 @@ static void pl2303_set_termios(struct tty_struct *tty,
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n", __func__);
/* Report back no change occurred */
- tty->termios = *old_termios;
+ if (old_termios)
+ tty->termios = *old_termios;
return;
}
@@ -433,7 +434,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
control = priv->line_control;
if ((cflag & CBAUD) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- else if ((old_termios->c_cflag & CBAUD) == B0)
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
if (control != priv->line_control) {
control = priv->line_control;
@@ -492,7 +493,6 @@ static void pl2303_close(struct usb_serial_port *port)
static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
{
- struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int result;
@@ -508,7 +508,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
/* Setup termios */
if (tty)
- pl2303_set_termios(tty, port, &tmp_termios);
+ pl2303_set_termios(tty, port, NULL);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index cf3df79..ddf6c47 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -291,7 +291,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int cflag = tty->termios.c_cflag;
- unsigned int old_cflag = old_termios->c_cflag;
unsigned short uartdata;
unsigned char buf[2] = {0, 0};
int baud;
@@ -299,15 +298,15 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
u8 control;
/* check that they really want us to change something */
- if (!tty_termios_hw_change(&tty->termios, old_termios))
+ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
/* set DTR/RTS active */
spin_lock_irqsave(&priv->lock, flags);
control = priv->line_control;
- if ((old_cflag & CBAUD) == B0) {
+ if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
priv->line_control |= MCR_DTR;
- if (!(old_cflag & CRTSCTS))
+ if (!(old_termios->c_cflag & CRTSCTS))
priv->line_control |= MCR_RTS;
}
if (control != priv->line_control) {
@@ -394,7 +393,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
{
- struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
int ret;
@@ -411,7 +409,7 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
spcp8x5_set_ctrl_line(port, priv->line_control);
if (tty)
- spcp8x5_set_termios(tty, port, &tmp_termios);
+ spcp8x5_set_termios(tty, port, NULL);
port->port.drain_delay = 256;
generated by cgit v0.10.2 at 2024-08-02 03:32:09 (GMT)