diff options
Diffstat (limited to 'drivers/video/omap2/displays')
| -rw-r--r-- | drivers/video/omap2/displays/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/Makefile | 3 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-generic.c | 56 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c | 159 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c | 77 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-taal.c | 253 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-toppoly-tdo35s.c | 154 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 528 |
8 files changed, 1153 insertions, 95 deletions
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig index b12a59c..dfb57ee 100644 --- a/drivers/video/omap2/displays/Kconfig +++ b/drivers/video/omap2/displays/Kconfig @@ -13,10 +13,28 @@ config PANEL_SHARP_LS037V7DW01 help LCD Panel used in TI's SDP3430 and EVM boards +config PANEL_SHARP_LQ043T1DG01 + tristate "Sharp LQ043T1DG01 LCD Panel" + depends on OMAP2_DSS + help + LCD Panel used in TI's OMAP3517 EVM boards + config PANEL_TAAL tristate "Taal DSI Panel" depends on OMAP2_DSS_DSI help Taal DSI command mode panel from TPO. +config PANEL_TOPPOLY_TDO35S + tristate "Toppoly TDO35S LCD Panel support" + depends on OMAP2_DSS + help + LCD Panel used in CM-T35 + +config PANEL_TPO_TD043MTEA1 + tristate "TPO TD043MTEA1 LCD Panel" + depends on OMAP2_DSS && I2C + help + LCD Panel used in OMAP3 Pandora + endmenu diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile index 9556464..e2bb321 100644 --- a/drivers/video/omap2/displays/Makefile +++ b/drivers/video/omap2/displays/Makefile @@ -1,4 +1,7 @@ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o +obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o obj-$(CONFIG_PANEL_TAAL) += panel-taal.o +obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o +obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c index eb48d1a..c59e4ba 100644 --- a/drivers/video/omap2/displays/panel-generic.c +++ b/drivers/video/omap2/displays/panel-generic.c @@ -35,6 +35,35 @@ static struct omap_video_timings generic_panel_timings = { .vbp = 7, }; +static int generic_panel_power_on(struct omap_dss_device *dssdev) +{ + int r; + + r = omapdss_dpi_display_enable(dssdev); + if (r) + goto err0; + + if (dssdev->platform_enable) { + r = dssdev->platform_enable(dssdev); + if (r) + goto err1; + } + + return 0; +err1: + omapdss_dpi_display_disable(dssdev); +err0: + return r; +} + +static void generic_panel_power_off(struct omap_dss_device *dssdev) +{ + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + omapdss_dpi_display_disable(dssdev); +} + static int generic_panel_probe(struct omap_dss_device *dssdev) { dssdev->panel.config = OMAP_DSS_LCD_TFT; @@ -51,27 +80,40 @@ static int generic_panel_enable(struct omap_dss_device *dssdev) { int r = 0; - if (dssdev->platform_enable) - r = dssdev->platform_enable(dssdev); + r = generic_panel_power_on(dssdev); + if (r) + return r; - return r; + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; } static void generic_panel_disable(struct omap_dss_device *dssdev) { - if (dssdev->platform_disable) - dssdev->platform_disable(dssdev); + generic_panel_power_off(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; } static int generic_panel_suspend(struct omap_dss_device *dssdev) { - generic_panel_disable(dssdev); + generic_panel_power_off(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; return 0; } static int generic_panel_resume(struct omap_dss_device *dssdev) { - return generic_panel_enable(dssdev); + int r = 0; + + r = generic_panel_power_on(dssdev); + if (r) + return r; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; } static struct omap_dss_driver generic_driver = { diff --git a/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c b/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c new file mode 100644 index 0000000..1026746 --- /dev/null +++ b/drivers/video/omap2/displays/panel-sharp-lq043t1dg01.c @@ -0,0 +1,159 @@ +/* + * LCD panel driver for Sharp LQ043T1DG01 + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> + +#include <plat/display.h> + +static struct omap_video_timings sharp_lq_timings = { + .x_res = 480, + .y_res = 272, + + .pixel_clock = 9000, + + .hsw = 42, + .hfp = 3, + .hbp = 2, + + .vsw = 11, + .vfp = 3, + .vbp = 2, +}; + +static int sharp_lq_panel_power_on(struct omap_dss_device *dssdev) +{ + int r; + + r = omapdss_dpi_display_enable(dssdev); + if (r) + goto err0; + + /* wait couple of vsyncs until enabling the LCD */ + msleep(50); + + if (dssdev->platform_enable) { + r = dssdev->platform_enable(dssdev); + if (r) + goto err1; + } + + return 0; +err1: + omapdss_dpi_display_disable(dssdev); +err0: + return r; +} + +static void sharp_lq_panel_power_off(struct omap_dss_device *dssdev) +{ + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + /* wait at least 5 vsyncs after disabling the LCD */ + msleep(100); + + omapdss_dpi_display_disable(dssdev); +} + +static int sharp_lq_panel_probe(struct omap_dss_device *dssdev) +{ + + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | + OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO; + dssdev->panel.acb = 0x0; + dssdev->panel.timings = sharp_lq_timings; + + return 0; +} + +static void sharp_lq_panel_remove(struct omap_dss_device *dssdev) +{ +} + +static int sharp_lq_panel_enable(struct omap_dss_device *dssdev) +{ + int r = 0; + + r = sharp_lq_panel_power_on(dssdev); + if (r) + return r; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static void sharp_lq_panel_disable(struct omap_dss_device *dssdev) +{ + sharp_lq_panel_power_off(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; +} + +static int sharp_lq_panel_suspend(struct omap_dss_device *dssdev) +{ + sharp_lq_panel_power_off(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; + return 0; +} + +static int sharp_lq_panel_resume(struct omap_dss_device *dssdev) +{ + int r = 0; + + r = sharp_lq_panel_power_on(dssdev); + if (r) + return r; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static struct omap_dss_driver sharp_lq_driver = { + .probe = sharp_lq_panel_probe, + .remove = sharp_lq_panel_remove, + + .enable = sharp_lq_panel_enable, + .disable = sharp_lq_panel_disable, + .suspend = sharp_lq_panel_suspend, + .resume = sharp_lq_panel_resume, + + .driver = { + .name = "sharp_lq_panel", + .owner = THIS_MODULE, + }, +}; + +static int __init sharp_lq_panel_drv_init(void) +{ + return omap_dss_register_driver(&sharp_lq_driver); +} + +static void __exit sharp_lq_panel_drv_exit(void) +{ + omap_dss_unregister_driver(&sharp_lq_driver); +} + +module_init(sharp_lq_panel_drv_init); +module_exit(sharp_lq_panel_drv_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c index bbe880bb..8d51a5e 100644 --- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c +++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c @@ -20,19 +20,10 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/device.h> -#include <linux/regulator/consumer.h> #include <linux/err.h> #include <plat/display.h> -struct sharp_data { - /* XXX This regulator should actually be in SDP board file, not here, - * as it doesn't actually power the LCD, but something else that - * affects the output to LCD (I think. Somebody clarify). It doesn't do - * harm here, as SDP is the only board using this currently */ - struct regulator *vdvi_reg; -}; - static struct omap_video_timings sharp_ls_timings = { .x_res = 480, .y_res = 640, @@ -50,77 +41,81 @@ static struct omap_video_timings sharp_ls_timings = { static int sharp_ls_panel_probe(struct omap_dss_device *dssdev) { - struct sharp_data *sd; - dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS; dssdev->panel.acb = 0x28; dssdev->panel.timings = sharp_ls_timings; - sd = kzalloc(sizeof(*sd), GFP_KERNEL); - if (!sd) - return -ENOMEM; - - dev_set_drvdata(&dssdev->dev, sd); - - sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi"); - if (IS_ERR(sd->vdvi_reg)) { - kfree(sd); - pr_err("failed to get VDVI regulator\n"); - return PTR_ERR(sd->vdvi_reg); - } - return 0; } static void sharp_ls_panel_remove(struct omap_dss_device *dssdev) { - struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); - - regulator_put(sd->vdvi_reg); - - kfree(sd); } -static int sharp_ls_panel_enable(struct omap_dss_device *dssdev) +static int sharp_ls_power_on(struct omap_dss_device *dssdev) { - struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); int r = 0; + r = omapdss_dpi_display_enable(dssdev); + if (r) + goto err0; + /* wait couple of vsyncs until enabling the LCD */ msleep(50); - regulator_enable(sd->vdvi_reg); - - if (dssdev->platform_enable) + if (dssdev->platform_enable) { r = dssdev->platform_enable(dssdev); + if (r) + goto err1; + } + return 0; +err1: + omapdss_dpi_display_disable(dssdev); +err0: return r; } -static void sharp_ls_panel_disable(struct omap_dss_device *dssdev) +static void sharp_ls_power_off(struct omap_dss_device *dssdev) { - struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); - if (dssdev->platform_disable) dssdev->platform_disable(dssdev); - regulator_disable(sd->vdvi_reg); - /* wait at least 5 vsyncs after disabling the LCD */ msleep(100); + + omapdss_dpi_display_disable(dssdev); +} + +static int sharp_ls_panel_enable(struct omap_dss_device *dssdev) +{ + int r; + r = sharp_ls_power_on(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + return r; +} + +static void sharp_ls_panel_disable(struct omap_dss_device *dssdev) +{ + sharp_ls_power_off(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; } static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev) { - sharp_ls_panel_disable(dssdev); + sharp_ls_power_off(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; return 0; } static int sharp_ls_panel_resume(struct omap_dss_device *dssdev) { - return sharp_ls_panel_enable(dssdev); + int r; + r = sharp_ls_power_on(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + return r; } static struct omap_dss_driver sharp_ls_driver = { diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c index 1f01dfc..fcd6a61 100644 --- a/drivers/video/omap2/displays/panel-taal.c +++ b/drivers/video/omap2/displays/panel-taal.c @@ -63,6 +63,8 @@ /* #define TAAL_USE_ESD_CHECK */ #define TAAL_ESD_CHECK_PERIOD msecs_to_jiffies(5000) +static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable); + struct taal_data { struct backlight_device *bldev; @@ -510,15 +512,12 @@ static int taal_probe(struct omap_dss_device *dssdev) if (td->esd_wq == NULL) { dev_err(&dssdev->dev, "can't create ESD workqueue\n"); r = -ENOMEM; - goto err2; + goto err1; } INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work); dev_set_drvdata(&dssdev->dev, td); - dssdev->get_timings = taal_get_timings; - dssdev->get_resolution = taal_get_resolution; - /* if no platform set_backlight() defined, presume DSI backlight * control */ if (!dssdev->set_backlight) @@ -528,7 +527,7 @@ static int taal_probe(struct omap_dss_device *dssdev) &taal_bl_ops); if (IS_ERR(bldev)) { r = PTR_ERR(bldev); - goto err1; + goto err2; } td->bldev = bldev; @@ -621,14 +620,12 @@ static void taal_remove(struct omap_dss_device *dssdev) kfree(td); } -static int taal_enable(struct omap_dss_device *dssdev) +static int taal_power_on(struct omap_dss_device *dssdev) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); u8 id1, id2, id3; int r; - dev_dbg(&dssdev->dev, "enable\n"); - if (dssdev->platform_enable) { r = dssdev->platform_enable(dssdev); if (r) @@ -638,6 +635,16 @@ static int taal_enable(struct omap_dss_device *dssdev) /* it seems we have to wait a bit until taal is ready */ msleep(5); + dsi_bus_lock(); + + r = omapdss_dsi_display_enable(dssdev); + if (r) { + dev_err(&dssdev->dev, "failed to enable DSI\n"); + goto err0; + } + + omapdss_dsi_vc_enable_hs(TCH, false); + r = taal_sleep_out(td); if (r) goto err; @@ -661,6 +668,10 @@ static int taal_enable(struct omap_dss_device *dssdev) taal_dcs_write_0(DCS_DISPLAY_ON); + r = _taal_enable_te(dssdev, td->te_enabled); + if (r) + goto err; + #ifdef TAAL_USE_ESD_CHECK queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); #endif @@ -676,19 +687,27 @@ static int taal_enable(struct omap_dss_device *dssdev) td->intro_printed = true; } + omapdss_dsi_vc_enable_hs(TCH, true); + + dsi_bus_unlock(); + return 0; err: + dsi_bus_unlock(); + + omapdss_dsi_display_disable(dssdev); +err0: if (dssdev->platform_disable) dssdev->platform_disable(dssdev); return r; } -static void taal_disable(struct omap_dss_device *dssdev) +static void taal_power_off(struct omap_dss_device *dssdev) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); - dev_dbg(&dssdev->dev, "disable\n"); + dsi_bus_lock(); cancel_delayed_work(&td->esd_work); @@ -698,41 +717,124 @@ static void taal_disable(struct omap_dss_device *dssdev) /* wait a bit so that the message goes through */ msleep(10); + omapdss_dsi_display_disable(dssdev); + if (dssdev->platform_disable) dssdev->platform_disable(dssdev); td->enabled = 0; + + dsi_bus_unlock(); +} + +static int taal_enable(struct omap_dss_device *dssdev) +{ + int r; + dev_dbg(&dssdev->dev, "enable\n"); + + if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) + return -EINVAL; + + r = taal_power_on(dssdev); + if (r) + return r; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return r; +} + +static void taal_disable(struct omap_dss_device *dssdev) +{ + dev_dbg(&dssdev->dev, "disable\n"); + + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) + taal_power_off(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; } static int taal_suspend(struct omap_dss_device *dssdev) { - struct taal_data *td = dev_get_drvdata(&dssdev->dev); - struct backlight_device *bldev = td->bldev; + dev_dbg(&dssdev->dev, "suspend\n"); - bldev->props.power = FB_BLANK_POWERDOWN; - taal_bl_update_status(bldev); + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + return -EINVAL; + + taal_power_off(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; return 0; } static int taal_resume(struct omap_dss_device *dssdev) { + int r; + dev_dbg(&dssdev->dev, "resume\n"); + + if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) + return -EINVAL; + + r = taal_power_on(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + return r; +} + +static void taal_framedone_cb(int err, void *data) +{ + struct omap_dss_device *dssdev = data; + dev_dbg(&dssdev->dev, "framedone, err %d\n", err); + dsi_bus_unlock(); +} + +static int taal_update(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h) +{ struct taal_data *td = dev_get_drvdata(&dssdev->dev); - struct backlight_device *bldev = td->bldev; + int r; - bldev->props.power = FB_BLANK_UNBLANK; - taal_bl_update_status(bldev); + dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h); + + dsi_bus_lock(); + + if (!td->enabled) { + r = 0; + goto err; + } + + r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h); + if (r) + goto err; + + r = taal_set_update_window(x, y, w, h); + if (r) + goto err; + + r = omap_dsi_update(dssdev, TCH, x, y, w, h, + taal_framedone_cb, dssdev); + if (r) + goto err; + /* note: no bus_unlock here. unlock is in framedone_cb */ return 0; +err: + dsi_bus_unlock(); + return r; } -static void taal_setup_update(struct omap_dss_device *dssdev, - u16 x, u16 y, u16 w, u16 h) +static int taal_sync(struct omap_dss_device *dssdev) { - taal_set_update_window(x, y, w, h); + dev_dbg(&dssdev->dev, "sync\n"); + + dsi_bus_lock(); + dsi_bus_unlock(); + + dev_dbg(&dssdev->dev, "sync done\n"); + + return 0; } -static int taal_enable_te(struct omap_dss_device *dssdev, bool enable) +static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); int r; @@ -744,25 +846,32 @@ static int taal_enable_te(struct omap_dss_device *dssdev, bool enable) else r = taal_dcs_write_0(DCS_TEAR_OFF); + omapdss_dsi_enable_te(dssdev, enable); + + /* XXX for some reason, DSI TE breaks if we don't wait here. + * Panel bug? Needs more studying */ + msleep(100); + return r; } -static int taal_wait_te(struct omap_dss_device *dssdev) +static int taal_enable_te(struct omap_dss_device *dssdev, bool enable) { - struct taal_data *td = dev_get_drvdata(&dssdev->dev); - long wait = msecs_to_jiffies(500); + int r; - if (!td->use_ext_te || !td->te_enabled) - return 0; + dsi_bus_lock(); - INIT_COMPLETION(td->te_completion); - wait = wait_for_completion_timeout(&td->te_completion, wait); - if (wait == 0) { - dev_err(&dssdev->dev, "timeout waiting TE\n"); - return -ETIME; - } + r = _taal_enable_te(dssdev, enable); - return 0; + dsi_bus_unlock(); + + return r; +} + +static int taal_get_te(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + return td->te_enabled; } static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate) @@ -772,16 +881,21 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate) dev_dbg(&dssdev->dev, "rotate %d\n", rotate); + dsi_bus_lock(); + if (td->enabled) { r = taal_set_addr_mode(rotate, td->mirror); - if (r) - return r; + goto err; } td->rotate = rotate; + dsi_bus_unlock(); return 0; +err: + dsi_bus_unlock(); + return r; } static u8 taal_get_rotate(struct omap_dss_device *dssdev) @@ -797,16 +911,20 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable) dev_dbg(&dssdev->dev, "mirror %d\n", enable); + dsi_bus_lock(); if (td->enabled) { r = taal_set_addr_mode(td->rotate, enable); - if (r) - return r; + goto err; } td->mirror = enable; + dsi_bus_unlock(); return 0; +err: + dsi_bus_unlock(); + return r; } static bool taal_get_mirror(struct omap_dss_device *dssdev) @@ -820,17 +938,23 @@ static int taal_run_test(struct omap_dss_device *dssdev, int test_num) u8 id1, id2, id3; int r; + dsi_bus_lock(); + r = taal_dcs_read_1(DCS_GET_ID1, &id1); if (r) - return r; + goto err; r = taal_dcs_read_1(DCS_GET_ID2, &id2); if (r) - return r; + goto err; r = taal_dcs_read_1(DCS_GET_ID3, &id3); if (r) - return r; + goto err; + dsi_bus_unlock(); return 0; +err: + dsi_bus_unlock(); + return r; } static int taal_memory_read(struct omap_dss_device *dssdev, @@ -841,6 +965,10 @@ static int taal_memory_read(struct omap_dss_device *dssdev, int first = 1; int plen; unsigned buf_used = 0; + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + + if (!td->enabled) + return -ENODEV; if (size < w * h * 3) return -ENOMEM; @@ -849,6 +977,8 @@ static int taal_memory_read(struct omap_dss_device *dssdev, dssdev->panel.timings.x_res * dssdev->panel.timings.y_res * 3); + dsi_bus_lock(); + /* plen 1 or 2 goes into short packet. until checksum error is fixed, * use short packets. plen 32 works, but bigger packets seem to cause * an error. */ @@ -857,11 +987,11 @@ static int taal_memory_read(struct omap_dss_device *dssdev, else plen = 2; - taal_setup_update(dssdev, x, y, w, h); + taal_set_update_window(x, y, w, h); r = dsi_vc_set_max_rx_packet_size(TCH, plen); if (r) - return r; + goto err0; while (buf_used < size) { u8 dcs_cmd = first ? 0x2e : 0x3e; @@ -894,7 +1024,8 @@ static int taal_memory_read(struct omap_dss_device *dssdev, err: dsi_vc_set_max_rx_packet_size(TCH, 1); - +err0: + dsi_bus_unlock(); return r; } @@ -939,8 +1070,11 @@ static void taal_esd_work(struct work_struct *work) } /* Self-diagnostics result is also shown on TE GPIO line. We need * to re-enable TE after self diagnostics */ - if (td->use_ext_te && td->te_enabled) - taal_enable_te(dssdev, true); + if (td->use_ext_te && td->te_enabled) { + r = taal_dcs_write_1(DCS_TEAR_ON, 0); + if (r) + goto err; + } dsi_bus_unlock(); @@ -958,6 +1092,20 @@ err: queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); } +static int taal_set_update_mode(struct omap_dss_device *dssdev, + enum omap_dss_update_mode mode) +{ + if (mode != OMAP_DSS_UPDATE_MANUAL) + return -EINVAL; + return 0; +} + +static enum omap_dss_update_mode taal_get_update_mode( + struct omap_dss_device *dssdev) +{ + return OMAP_DSS_UPDATE_MANUAL; +} + static struct omap_dss_driver taal_driver = { .probe = taal_probe, .remove = taal_remove, @@ -967,9 +1115,18 @@ static struct omap_dss_driver taal_driver = { .suspend = taal_suspend, .resume = taal_resume, - .setup_update = taal_setup_update, + .set_update_mode = taal_set_update_mode, + .get_update_mode = taal_get_update_mode, + + .update = taal_update, + .sync = taal_sync, + + .get_resolution = taal_get_resolution, + .get_recommended_bpp = omapdss_default_get_recommended_bpp, + .enable_te = taal_enable_te, - .wait_for_te = taal_wait_te, + .get_te = taal_get_te, + .set_rotate = taal_rotate, .get_rotate = taal_get_rotate, .set_mirror = taal_mirror, @@ -977,6 +1134,8 @@ static struct omap_dss_driver taal_driver = { .run_test = taal_run_test, .memory_read = taal_memory_read, + .get_timings = taal_get_timings, + .driver = { .name = "taal", .owner = THIS_MODULE, diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c new file mode 100644 index 0000000..fa434ca --- /dev/null +++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c @@ -0,0 +1,154 @@ +/* + * LCD panel driver for Toppoly TDO35S + * + * Copyright (C) 2009 CompuLab, Ltd. + * Author: Mike Rapoport <mike@compulab.co.il> + * + * Based on generic panel support + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/delay.h> + +#include <plat/display.h> + +static struct omap_video_timings toppoly_tdo_panel_timings = { + /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ + .x_res = 480, + .y_res = 640, + + .pixel_clock = 26000, + + .hfp = 104, + .hsw = 8, + .hbp = 8, + + .vfp = 4, + .vsw = 2, + .vbp = 2, +}; + +static int toppoly_tdo_panel_power_on(struct omap_dss_device *dssdev) +{ + int r; + + r = omapdss_dpi_display_enable(dssdev); + if (r) + goto err0; + + if (dssdev->platform_enable) { + r = dssdev->platform_enable(dssdev); + if (r) + goto err1; + } + + return 0; +err1: + omapdss_dpi_display_disable(dssdev); +err0: + return r; +} + +static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev) +{ + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + omapdss_dpi_display_disable(dssdev); +} + +static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev) +{ + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | + OMAP_DSS_LCD_IHS; + dssdev->panel.timings = toppoly_tdo_panel_timings; + + return 0; +} + +static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev) +{ +} + +static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev) +{ + int r = 0; + + r = toppoly_tdo_panel_power_on(dssdev); + if (r) + return r; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev) +{ + toppoly_tdo_panel_power_off(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; +} + +static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev) +{ + toppoly_tdo_panel_power_off(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; + return 0; +} + +static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev) +{ + int r = 0; + + r = toppoly_tdo_panel_power_on(dssdev); + if (r) + return r; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static struct omap_dss_driver generic_driver = { + .probe = toppoly_tdo_panel_probe, + .remove = toppoly_tdo_panel_remove, + + .enable = toppoly_tdo_panel_enable, + .disable = toppoly_tdo_panel_disable, + .suspend = toppoly_tdo_panel_suspend, + .resume = toppoly_tdo_panel_resume, + + .driver = { + .name = "toppoly_tdo35s_panel", + .owner = THIS_MODULE, + }, +}; + +static int __init toppoly_tdo_panel_drv_init(void) +{ + return omap_dss_register_driver(&generic_driver); +} + +static void __exit toppoly_tdo_panel_drv_exit(void) +{ + omap_dss_unregister_driver(&generic_driver); +} + +module_init(toppoly_tdo_panel_drv_init); +module_exit(toppoly_tdo_panel_drv_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c new file mode 100644 index 0000000..d578fee --- /dev/null +++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c @@ -0,0 +1,528 @@ +/* + * LCD panel driver for TPO TD043MTEA1 + * + * Author: Gražvydas Ignotas <notasas@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio.h> +#include <linux/err.h> + +#include <plat/display.h> + +#define TPO_R02_MODE(x) ((x) & 7) +#define TPO_R02_MODE_800x480 7 +#define TPO_R02_NCLK_RISING BIT(3) +#define TPO_R02_HSYNC_HIGH BIT(4) +#define TPO_R02_VSYNC_HIGH BIT(5) + +#define TPO_R03_NSTANDBY BIT(0) +#define TPO_R03_EN_CP_CLK BIT(1) +#define TPO_R03_EN_VGL_PUMP BIT(2) +#define TPO_R03_EN_PWM BIT(3) +#define TPO_R03_DRIVING_CAP_100 BIT(4) +#define TPO_R03_EN_PRE_CHARGE BIT(6) +#define TPO_R03_SOFTWARE_CTL BIT(7) + +#define TPO_R04_NFLIP_H BIT(0) +#define TPO_R04_NFLIP_V BIT(1) +#define TPO_R04_CP_CLK_FREQ_1H BIT(2) +#define TPO_R04_VGL_FREQ_1H BIT(4) + +#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \ + TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \ + TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \ + TPO_R03_SOFTWARE_CTL) + +#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \ + TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL) + +static const u16 tpo_td043_def_gamma[12] = { + 106, 200, 289, 375, 460, 543, 625, 705, 785, 864, 942, 1020 +}; + +struct tpo_td043_device { + struct spi_device *spi; + struct regulator *vcc_reg; + u16 gamma[12]; + u32 mode; + u32 hmirror:1; + u32 vmirror:1; +}; + +static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data) +{ + struct spi_message m; + struct spi_transfer xfer; + u16 w; + int r; + + spi_message_init(&m); + + memset(&xfer, 0, sizeof(xfer)); + + w = ((u16)addr << 10) | (1 << 8) | data; + xfer.tx_buf = &w; + xfer.bits_per_word = 16; + xfer.len = 2; + spi_message_add_tail(&xfer, &m); + + r = spi_sync(spi, &m); + if (r < 0) + dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r); + return r; +} + +static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12]) +{ + u8 i, val; + + /* gamma bits [9:8] */ + for (val = i = 0; i < 4; i++) + val |= (gamma[i] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x11, val); + + for (val = i = 0; i < 4; i++) + val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x12, val); + + for (val = i = 0; i < 4; i++) + val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2); + tpo_td043_write(spi, 0x13, val); + + /* gamma bits [7:0] */ + for (val = i = 0; i < 12; i++) + tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff); +} + +static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v) +{ + u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | \ + TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H; + if (h) + reg4 &= ~TPO_R04_NFLIP_H; + if (v) + reg4 &= ~TPO_R04_NFLIP_V; + + return tpo_td043_write(spi, 4, reg4); +} + +static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + + tpo_td043->hmirror = enable; + return tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, + tpo_td043->vmirror); +} + +static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + + return tpo_td043->hmirror; +} + +static ssize_t tpo_td043_vmirror_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->vmirror); +} + +static ssize_t tpo_td043_vmirror_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + long val; + int ret; + + ret = strict_strtol(buf, 0, &val); + if (ret < 0) + return ret; + + ret = tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, val); + if (ret < 0) + return ret; + + tpo_td043->vmirror = val; + + return count; +} + +static ssize_t tpo_td043_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->mode); +} + +static ssize_t tpo_td043_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + long val; + int ret; + + ret = strict_strtol(buf, 0, &val); + if (ret != 0 || val & ~7) + return -EINVAL; + + tpo_td043->mode = val; + + val |= TPO_R02_NCLK_RISING; + tpo_td043_write(tpo_td043->spi, 2, val); + + return count; +} + +static ssize_t tpo_td043_gamma_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + ssize_t len = 0; + int ret; + int i; + + for (i = 0; i < ARRAY_SIZE(tpo_td043->gamma); i++) { + ret = snprintf(buf + len, PAGE_SIZE - len, "%u ", + tpo_td043->gamma[i]); + if (ret < 0) + return ret; + len += ret; + } + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t tpo_td043_gamma_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev); + unsigned int g[12]; + int ret; + int i; + + ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u", + &g[0], &g[1], &g[2], &g[3], &g[4], &g[5], + &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]); + + if (ret != 12) + return -EINVAL; + + for (i = 0; i < 12; i++) + tpo_td043->gamma[i] = g[i]; + + tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma); + + return count; +} + +static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR, + tpo_td043_vmirror_show, tpo_td043_vmirror_store); +static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, + tpo_td043_mode_show, tpo_td043_mode_store); +static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR, + tpo_td043_gamma_show, tpo_td043_gamma_store); + +static struct attribute *tpo_td043_attrs[] = { + &dev_attr_vmirror.attr, + &dev_attr_mode.attr, + &dev_attr_gamma.attr, + NULL, +}; + +static struct attribute_group tpo_td043_attr_group = { + .attrs = tpo_td043_attrs, +}; + +static const struct omap_video_timings tpo_td043_timings = { + .x_res = 800, + .y_res = 480, + + .pixel_clock = 36000, + + .hsw = 1, + .hfp = 68, + .hbp = 214, + + .vsw = 1, + .vfp = 39, + .vbp = 34, +}; + +static int tpo_td043_power_on(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int nreset_gpio = dssdev->reset_gpio; + int r; + + r = omapdss_dpi_display_enable(dssdev); + if (r) + goto err0; + + if (dssdev->platform_enable) { + r = dssdev->platform_enable(dssdev); + if (r) + goto err1; + } + + regulator_enable(tpo_td043->vcc_reg); + + /* wait for power up */ + msleep(160); + + if (gpio_is_valid(nreset_gpio)) + gpio_set_value(nreset_gpio, 1); + + tpo_td043_write(tpo_td043->spi, 2, + TPO_R02_MODE(tpo_td043->mode) | TPO_R02_NCLK_RISING); + tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_NORMAL); + tpo_td043_write(tpo_td043->spi, 0x20, 0xf0); + tpo_td043_write(tpo_td043->spi, 0x21, 0xf0); + tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, + tpo_td043->vmirror); + tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma); + + return 0; +err1: + omapdss_dpi_display_disable(dssdev); +err0: + return r; +} + +static void tpo_td043_power_off(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int nreset_gpio = dssdev->reset_gpio; + + tpo_td043_write(tpo_td043->spi, 3, + TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM); + + if (gpio_is_valid(nreset_gpio)) + gpio_set_value(nreset_gpio, 0); + + /* wait for at least 2 vsyncs before cutting off power */ + msleep(50); + + tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_STANDBY); + + regulator_disable(tpo_td043->vcc_reg); + + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + omapdss_dpi_display_disable(dssdev); +} + +static int tpo_td043_enable(struct omap_dss_device *dssdev) +{ + int ret; + + dev_dbg(&dssdev->dev, "enable\n"); + + ret = tpo_td043_power_on(dssdev); + if (ret) + return ret; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static void tpo_td043_disable(struct omap_dss_device *dssdev) +{ + dev_dbg(&dssdev->dev, "disable\n"); + + tpo_td043_power_off(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; +} + +static int tpo_td043_suspend(struct omap_dss_device *dssdev) +{ + tpo_td043_power_off(dssdev); + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; + return 0; +} + +static int tpo_td043_resume(struct omap_dss_device *dssdev) +{ + int r = 0; + + r = tpo_td043_power_on(dssdev); + if (r) + return r; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static int tpo_td043_probe(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int nreset_gpio = dssdev->reset_gpio; + int ret = 0; + + dev_dbg(&dssdev->dev, "probe\n"); + + if (tpo_td043 == NULL) { + dev_err(&dssdev->dev, "missing tpo_td043_device\n"); + return -ENODEV; + } + + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IHS | + OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IPC; + dssdev->panel.timings = tpo_td043_timings; + dssdev->ctrl.pixel_size = 24; + + tpo_td043->mode = TPO_R02_MODE_800x480; + memcpy(tpo_td043->gamma, tpo_td043_def_gamma, sizeof(tpo_td043->gamma)); + + tpo_td043->vcc_reg = regulator_get(&dssdev->dev, "vcc"); + if (IS_ERR(tpo_td043->vcc_reg)) { + dev_err(&dssdev->dev, "failed to get LCD VCC regulator\n"); + ret = PTR_ERR(tpo_td043->vcc_reg); + goto fail_regulator; + } + + if (gpio_is_valid(nreset_gpio)) { + ret = gpio_request(nreset_gpio, "lcd reset"); + if (ret < 0) { + dev_err(&dssdev->dev, "couldn't request reset GPIO\n"); + goto fail_gpio_req; + } + + ret = gpio_direction_output(nreset_gpio, 0); + if (ret < 0) { + dev_err(&dssdev->dev, "couldn't set GPIO direction\n"); + goto fail_gpio_direction; + } + } + + ret = sysfs_create_group(&dssdev->dev.kobj, &tpo_td043_attr_group); + if (ret) + dev_warn(&dssdev->dev, "failed to create sysfs files\n"); + + return 0; + +fail_gpio_direction: + gpio_free(nreset_gpio); +fail_gpio_req: + regulator_put(tpo_td043->vcc_reg); +fail_regulator: + kfree(tpo_td043); + return ret; +} + +static void tpo_td043_remove(struct omap_dss_device *dssdev) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev); + int nreset_gpio = dssdev->reset_gpio; + + dev_dbg(&dssdev->dev, "remove\n"); + + sysfs_remove_group(&dssdev->dev.kobj, &tpo_td043_attr_group); + regulator_put(tpo_td043->vcc_reg); + if (gpio_is_valid(nreset_gpio)) + gpio_free(nreset_gpio); +} + +static struct omap_dss_driver tpo_td043_driver = { + .probe = tpo_td043_probe, + .remove = tpo_td043_remove, + + .enable = tpo_td043_enable, + .disable = tpo_td043_disable, + .suspend = tpo_td043_suspend, + .resume = tpo_td043_resume, + .set_mirror = tpo_td043_set_hmirror, + .get_mirror = tpo_td043_get_hmirror, + + .driver = { + .name = "tpo_td043mtea1_panel", + .owner = THIS_MODULE, + }, +}; + +static int tpo_td043_spi_probe(struct spi_device *spi) +{ + struct omap_dss_device *dssdev = spi->dev.platform_data; + struct tpo_td043_device *tpo_td043; + int ret; + + if (dssdev == NULL) { + dev_err(&spi->dev, "missing dssdev\n"); + return -ENODEV; + } + + spi->bits_per_word = 16; + spi->mode = SPI_MODE_0; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "spi_setup failed: %d\n", ret); + return ret; + } + + tpo_td043 = kzalloc(sizeof(*tpo_td043), GFP_KERNEL); + if (tpo_td043 == NULL) + return -ENOMEM; + + tpo_td043->spi = spi; + dev_set_drvdata(&spi->dev, tpo_td043); + dev_set_drvdata(&dssdev->dev, tpo_td043); + + omap_dss_register_driver(&tpo_td043_driver); + + return 0; +} + +static int __devexit tpo_td043_spi_remove(struct spi_device *spi) +{ + struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&spi->dev); + + omap_dss_unregister_driver(&tpo_td043_driver); + kfree(tpo_td043); + + return 0; +} + +static struct spi_driver tpo_td043_spi_driver = { + .driver = { + .name = "tpo_td043mtea1_panel_spi", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = tpo_td043_spi_probe, + .remove = __devexit_p(tpo_td043_spi_remove), +}; + +static int __init tpo_td043_init(void) +{ + return spi_register_driver(&tpo_td043_spi_driver); +} + +static void __exit tpo_td043_exit(void) +{ + spi_unregister_driver(&tpo_td043_spi_driver); +} + +module_init(tpo_td043_init); +module_exit(tpo_td043_exit); + +MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>"); +MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver"); +MODULE_LICENSE("GPL"); |