diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ata/Kconfig | 18 | ||||
-rw-r--r-- | drivers/ata/Makefile | 2 | ||||
-rw-r--r-- | drivers/ata/ahci.c | 2 | ||||
-rw-r--r-- | drivers/ata/ahci_platform.c | 26 | ||||
-rw-r--r-- | drivers/ata/ata_generic.c | 4 | ||||
-rw-r--r-- | drivers/ata/ata_piix.c | 8 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 161 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 1 | ||||
-rw-r--r-- | drivers/ata/pata_samsung_cf.c | 683 | ||||
-rw-r--r-- | drivers/ata/pata_scc.c | 3 | ||||
-rw-r--r-- | drivers/ata/sata_dwc_460ex.c | 1756 | ||||
-rw-r--r-- | drivers/ata/sata_fsl.c | 20 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 47 | ||||
-rw-r--r-- | drivers/ata/sata_nv.c | 32 | ||||
-rw-r--r-- | drivers/pci/quirks.c | 6 |
15 files changed, 2611 insertions, 158 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index aa85a98..8fae6af 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -187,6 +187,15 @@ config ATA_PIIX If unsure, say N. +config SATA_DWC + tristate "DesignWare Cores SATA support" + depends on 460EX + help + This option enables support for the on-chip SATA controller of the + AppliedMicro processor 460EX. + + If unsure, say N. + config SATA_MV tristate "Marvell SATA support" help @@ -796,6 +805,15 @@ config PATA_RZ1000 If unsure, say N. +config PATA_SAMSUNG_CF + tristate "Samsung SoC PATA support" + depends on SAMSUNG_DEV_IDE + help + This option enables basic support for Samsung's S3C/S5P board + PATA controllers via the new ATA layer + + If unsure, say N. + config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" depends on ISA && EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 7ef89d7..6540632 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o +obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o @@ -87,6 +88,7 @@ obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_QDI) += pata_qdi.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o +obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o # Should be last but two libata driver diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index f252253..fe75d8b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1042,7 +1042,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) VPRINTK("ENTER\n"); - WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); + WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS); if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 5e11b16..4e97f33 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -54,19 +54,13 @@ static int __init ahci_probe(struct platform_device *pdev) return -EINVAL; } - if (pdata && pdata->init) { - rc = pdata->init(dev); - if (rc) - return rc; - } - if (pdata && pdata->ata_port_info) pi = *pdata->ata_port_info; hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) { - rc = -ENOMEM; - goto err0; + dev_err(dev, "can't alloc ahci_host_priv\n"); + return -ENOMEM; } hpriv->flags |= (unsigned long)pi.private_data; @@ -74,8 +68,19 @@ static int __init ahci_probe(struct platform_device *pdev) hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); if (!hpriv->mmio) { dev_err(dev, "can't map %pR\n", mem); - rc = -ENOMEM; - goto err0; + return -ENOMEM; + } + + /* + * Some platforms might need to prepare for mmio region access, + * which could be done in the following init call. So, the mmio + * region shouldn't be accessed before init (if provided) has + * returned successfully. + */ + if (pdata && pdata->init) { + rc = pdata->init(dev, hpriv->mmio); + if (rc) + return rc; } ahci_save_initial_config(dev, hpriv, @@ -166,7 +171,6 @@ static int __devexit ahci_remove(struct platform_device *pdev) } static struct platform_driver ahci_driver = { - .probe = ahci_probe, .remove = __devexit_p(ahci_remove), .driver = { .name = "ahci", diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 7107a69..cc5f772 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -54,7 +54,6 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) const struct pci_device_id *id = ap->host->private_data; int dma_enabled = 0; struct ata_device *dev; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (id->driver_data & ATA_GEN_FORCE_DMA) { dma_enabled = 0xff; @@ -63,9 +62,6 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); } - if (pdev->vendor == PCI_VENDOR_ID_CENATEK) - dma_enabled = 0xFF; - ata_for_each_dev(dev, link, ENABLED) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 7409f98..3971bc0 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -158,6 +158,7 @@ struct piix_map_db { struct piix_host_priv { const int *map; u32 saved_iocfg; + spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */ void __iomem *sidpr; }; @@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct ata_link *link, unsigned int reg, u32 *val) { struct piix_host_priv *hpriv = link->ap->host->private_data; + unsigned long flags; if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; + spin_lock_irqsave(&hpriv->sidpr_lock, flags); piix_sidpr_sel(link, reg); *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); + spin_unlock_irqrestore(&hpriv->sidpr_lock, flags); return 0; } @@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct ata_link *link, unsigned int reg, u32 val) { struct piix_host_priv *hpriv = link->ap->host->private_data; + unsigned long flags; if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; + spin_lock_irqsave(&hpriv->sidpr_lock, flags); piix_sidpr_sel(link, reg); iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); + spin_unlock_irqrestore(&hpriv->sidpr_lock, flags); return 0; } @@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; + spin_lock_init(&hpriv->sidpr_lock); /* Save IOCFG, this will be used for cable detection, quirk * detection and restoration on detach. This is necessary diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ddf8e48..a0a4d69 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4167,15 +4167,13 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA }, { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA }, { "CRD-8400B", NULL, ATA_HORKAGE_NODMA }, - { "CRD-8480B", NULL, ATA_HORKAGE_NODMA }, - { "CRD-8482B", NULL, ATA_HORKAGE_NODMA }, + { "CRD-848[02]B", NULL, ATA_HORKAGE_NODMA }, { "CRD-84", NULL, ATA_HORKAGE_NODMA }, { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA }, { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA }, { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA }, { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA }, - { "HITACHI CDR-8335", NULL, ATA_HORKAGE_NODMA }, - { "HITACHI CDR-8435", NULL, ATA_HORKAGE_NODMA }, + { "HITACHI CDR-8[34]35",NULL, ATA_HORKAGE_NODMA }, { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA }, { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA }, { "CD-532E-A", NULL, ATA_HORKAGE_NODMA }, @@ -4211,70 +4209,16 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ }, /* Seagate NCQ + FLUSH CACHE firmware bug */ - { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ | + { "ST31500341AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ | + { "ST31000333AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ | + { "ST3640[36]23AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - - { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - - { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ | - ATA_HORKAGE_FIRMWARE_WARN }, - { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ | + { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, /* Blacklist entries taken from Silicon Image 3124/3132 @@ -4303,12 +4247,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices which get the IVB wrong */ { "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, }, /* Maybe we should just blacklist TSSTcorp... */ - { "TSSTcorp CDDVDW SH-S202H", "SB00", ATA_HORKAGE_IVB, }, - { "TSSTcorp CDDVDW SH-S202H", "SB01", ATA_HORKAGE_IVB, }, - { "TSSTcorp CDDVDW SH-S202J", "SB00", ATA_HORKAGE_IVB, }, - { "TSSTcorp CDDVDW SH-S202J", "SB01", ATA_HORKAGE_IVB, }, - { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, }, - { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, }, + { "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]", ATA_HORKAGE_IVB, }, /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, @@ -4326,29 +4265,73 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { } }; -static int strn_pattern_cmp(const char *patt, const char *name, int wildchar) +/** + * glob_match - match a text string against a glob-style pattern + * @text: the string to be examined + * @pattern: the glob-style pattern to be matched against + * + * Either/both of text and pattern can be empty strings. + * + * Match text against a glob-style pattern, with wildcards and simple sets: + * + * ? matches any single character. + * * matches any run of characters. + * [xyz] matches a single character from the set: x, y, or z. + * [a-d] matches a single character from the range: a, b, c, or d. + * [a-d0-9] matches a single character from either range. + * + * The special characters ?, [, -, or *, can be matched using a set, eg. [*] + * Behaviour with malformed patterns is undefined, though generally reasonable. + * + * Example patterns: "SD1?", "SD1[0-5]", "*R0", SD*1?[012]*xx" + * + * This function uses one level of recursion per '*' in pattern. + * Since it calls _nothing_ else, and has _no_ explicit local variables, + * this will not cause stack problems for any reasonable use here. + * + * RETURNS: + * 0 on match, 1 otherwise. + */ +static int glob_match (const char *text, const char *pattern) { - const char *p; - int len; - - /* - * check for trailing wildcard: *\0 - */ - p = strchr(patt, wildchar); - if (p && ((*(p + 1)) == 0)) - len = p - patt; - else { - len = strlen(name); - if (!len) { - if (!*patt) - return 0; - return -1; + do { + /* Match single character or a '?' wildcard */ + if (*text == *pattern || *pattern == '?') { + if (!*pattern++) + return 0; /* End of both strings: match */ + } else { + /* Match single char against a '[' bracketed ']' pattern set */ + if (!*text || *pattern != '[') + break; /* Not a pattern set */ + while (*++pattern && *pattern != ']' && *text != *pattern) { + if (*pattern == '-' && *(pattern - 1) != '[') + if (*text > *(pattern - 1) && *text < *(pattern + 1)) { + ++pattern; + break; + } + } + if (!*pattern || *pattern == ']') + return 1; /* No match */ + while (*pattern && *pattern++ != ']'); + } + } while (*++text && *pattern); + + /* Match any run of chars against a '*' wildcard */ + if (*pattern == '*') { + if (!*++pattern) + return 0; /* Match: avoid recursion at end of pattern */ + /* Loop to handle additional pattern chars after the wildcard */ + while (*text) { + if (glob_match(text, pattern) == 0) + return 0; /* Remainder matched */ + ++text; /* Absorb (match) this char and try again */ } } - - return strncmp(patt, name, len); + if (!*text && !*pattern) + return 0; /* End of both strings: match */ + return 1; /* No match */ } - + static unsigned long ata_dev_blacklisted(const struct ata_device *dev) { unsigned char model_num[ATA_ID_PROD_LEN + 1]; @@ -4359,10 +4342,10 @@ static unsigned long ata_dev_blacklisted(const struct ata_device *dev) ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev)); while (ad->model_num) { - if (!strn_pattern_cmp(ad->model_num, model_num, '*')) { + if (!glob_match(model_num, ad->model_num)) { if (ad->model_rev == NULL) return ad->horkage; - if (!strn_pattern_cmp(ad->model_rev, model_rev, '*')) + if (!glob_match(model_rev, ad->model_rev)) return ad->horkage; } ad++; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f77a673..697474b 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2214,6 +2214,7 @@ const char *ata_get_cmd_descript(u8 command) { ATA_CMD_SMART, "SMART" }, { ATA_CMD_MEDIA_LOCK, "DOOR LOCK" }, { ATA_CMD_MEDIA_UNLOCK, "DOOR UNLOCK" }, + { ATA_CMD_DSM, "DATA SET MANAGEMENT" }, { ATA_CMD_CHK_MED_CRD_TYP, "CHECK MEDIA CARD TYPE" }, { ATA_CMD_CFA_REQ_EXT_ERR, "CFA REQUEST EXTENDED ERROR" }, { ATA_CMD_CFA_WRITE_NE, "CFA WRITE SECTORS WITHOUT ERASE" }, diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c new file mode 100644 index 0000000..6f9cfb2 --- /dev/null +++ b/drivers/ata/pata_samsung_cf.c @@ -0,0 +1,683 @@ +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * PATA driver for Samsung SoCs. + * Supports CF Interface in True IDE mode. Currently only PIO mode has been + * implemented; UDMA support has to be added. + * + * Based on: + * PATA driver for AT91SAM9260 Static Memory Controller + * PATA driver for Toshiba SCC controller + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/libata.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <plat/ata.h> +#include <plat/regs-ata.h> + +#define DRV_NAME "pata_samsung_cf" +#define DRV_VERSION "0.1" + +enum s3c_cpu_type { + TYPE_S3C64XX, + TYPE_S5PC100, + TYPE_S5PV210, +}; + +/* + * struct s3c_ide_info - S3C PATA instance. + * @clk: The clock resource for this controller. + * @ide_addr: The area mapped for the hardware registers. + * @sfr_addr: The area mapped for the special function registers. + * @irq: The IRQ number we are using. + * @cpu_type: The exact type of this controller. + * @fifo_status_reg: The ATA_FIFO_STATUS register offset. + */ +struct s3c_ide_info { + struct clk *clk; + void __iomem *ide_addr; + void __iomem *sfr_addr; + unsigned int irq; + enum s3c_cpu_type cpu_type; + unsigned int fifo_status_reg; +}; + +static void pata_s3c_set_endian(void __iomem *s3c_ide_regbase, u8 mode) +{ + u32 reg = readl(s3c_ide_regbase + S3C_ATA_CFG); + reg = mode ? (reg & ~S3C_ATA_CFG_SWAP) : (reg | S3C_ATA_CFG_SWAP); + writel(reg, s3c_ide_regbase + S3C_ATA_CFG); +} + +static void pata_s3c_cfg_mode(void __iomem *s3c_ide_sfrbase) +{ + /* Select true-ide as the internal operating mode */ + writel(readl(s3c_ide_sfrbase + S3C_CFATA_MUX) | S3C_CFATA_MUX_TRUEIDE, + s3c_ide_sfrbase + S3C_CFATA_MUX); +} + +static unsigned long +pata_s3c_setup_timing(struct s3c_ide_info *info, const struct ata_timing *ata) +{ + int t1 = ata->setup; + int t2 = ata->act8b; + int t2i = ata->rec8b; + ulong piotime; + + piotime = ((t2i & 0xff) << 12) | ((t2 & 0xff) << 4) | (t1 & 0xf); + + return piotime; +} + +static void pata_s3c_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct s3c_ide_info *info = ap->host->private_data; + struct ata_timing timing; + int cycle_time; + ulong ata_cfg = readl(info->ide_addr + S3C_ATA_CFG); + ulong piotime; + + /* Enables IORDY if mode requires it */ + if (ata_pio_need_iordy(adev)) + ata_cfg |= S3C_ATA_CFG_IORDYEN; + else + ata_cfg &= ~S3C_ATA_CFG_IORDYEN; + + cycle_time = (int)(1000000000UL / clk_get_rate(info->clk)); + + ata_timing_compute(adev, adev->pio_mode, &timing, + cycle_time * 1000, 0); + + piotime = pata_s3c_setup_timing(info, &timing); + + writel(ata_cfg, info->ide_addr + S3C_ATA_CFG); + writel(piotime, info->ide_addr + S3C_ATA_PIO_TIME); +} + +/* + * Waits until the IDE controller is able to perform next read/write + * operation to the disk. Needed for 64XX series boards only. + */ +static int wait_for_host_ready(struct s3c_ide_info *info) +{ + ulong timeout; + void __iomem *fifo_reg = info->ide_addr + info->fifo_status_reg; + + /* wait for maximum of 20 msec */ + timeout = jiffies + msecs_to_jiffies(20); + while (time_before(jiffies, timeout)) { + if ((readl(fifo_reg) >> 28) == 0) + return 0; + } + return -EBUSY; +} + +/* + * Writes to one of the task file registers. + */ +static void ata_outb(struct ata_host *host, u8 addr, void __iomem *reg) +{ + struct s3c_ide_info *info = host->private_data; + + wait_for_host_ready(info); + writeb(addr, reg); +} + +/* + * Reads from one of the task file registers. + */ +static u8 ata_inb(struct ata_host *host, void __iomem *reg) +{ + struct s3c_ide_info *info = host->private_data; + u8 temp; + + wait_for_host_ready(info); + (void) readb(reg); + wait_for_host_ready(info); + temp = readb(info->ide_addr + S3C_ATA_PIO_RDATA); + return temp; +} + +/* + * pata_s3c_tf_load - send taskfile registers to host controller + */ +static void pata_s3c_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + ata_outb(ap->host, tf->hob_feature, ioaddr->feature_addr); + ata_outb(ap->host, tf->hob_nsect, ioaddr->nsect_addr); + ata_outb(ap->host, tf->hob_lbal, ioaddr->lbal_addr); + ata_outb(ap->host, tf->hob_lbam, ioaddr->lbam_addr); + ata_outb(ap->host, tf->hob_lbah, ioaddr->lbah_addr); + } + + if (is_addr) { + ata_outb(ap->host, tf->feature, ioaddr->feature_addr); + ata_outb(ap->host, tf->nsect, ioaddr->nsect_addr); + ata_outb(ap->host, tf->lbal, ioaddr->lbal_addr); + ata_outb(ap->host, tf->lbam, ioaddr->lbam_addr); + ata_outb(ap->host, tf->lbah, ioaddr->lbah_addr); + } + + if (tf->flags & ATA_TFLAG_DEVICE) + ata_outb(ap->host, tf->device, ioaddr->device_addr); + + ata_wait_idle(ap); +} + +/* + * pata_s3c_tf_read - input device's ATA taskfile shadow registers + */ +static void pata_s3c_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->feature = ata_inb(ap->host, ioaddr->error_addr); + tf->nsect = ata_inb(ap->host, ioaddr->nsect_addr); + tf->lbal = ata_inb(ap->host, ioaddr->lbal_addr); + tf->lbam = ata_inb(ap->host, ioaddr->lbam_addr); + tf->lbah = ata_inb(ap->host, ioaddr->lbah_addr); + tf->device = ata_inb(ap->host, ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + ata_outb(ap->host, tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = ata_inb(ap->host, ioaddr->error_addr); + tf->hob_nsect = ata_inb(ap->host, ioaddr->nsect_addr); + tf->hob_lbal = ata_inb(ap->host, ioaddr->lbal_addr); + tf->hob_lbam = ata_inb(ap->host, ioaddr->lbam_addr); + tf->hob_lbah = ata_inb(ap->host, ioaddr->lbah_addr); + ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } +} + +/* + * pata_s3c_exec_command - issue ATA command to host controller + */ +static void pata_s3c_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ata_outb(ap->host, tf->command, ap->ioaddr.command_addr); + ata_sff_pause(ap); +} + +/* + * pata_s3c_check_status - Read device status register + */ +static u8 pata_s3c_check_status(struct ata_port *ap) +{ + return ata_inb(ap->host, ap->ioaddr.status_addr); +} + +/* + * pata_s3c_check_altstatus - Read alternate device status register + */ +static u8 pata_s3c_check_altstatus(struct ata_port *ap) +{ + return ata_inb(ap->host, ap->ioaddr.altstatus_addr); +} + +/* + * pata_s3c_data_xfer - Transfer data by PIO + */ +unsigned int pata_s3c_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + struct s3c_ide_info *info = ap->host->private_data; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned int words = buflen >> 1, i; + u16 *data_ptr = (u16 *)buf; + + /* Requires wait same as in ata_inb/ata_outb */ + if (rw == READ) + for (i = 0; i < words; i++, data_ptr++) { + wait_for_host_ready(info); + (void) readw(data_addr); + wait_for_host_ready(info); + *data_ptr = readw(info->ide_addr + + S3C_ATA_PIO_RDATA); + } + else + for (i = 0; i < words; i++, data_ptr++) { + wait_for_host_ready(info); + writew(*data_ptr, data_addr); + } + + if (buflen & 0x01) + dev_err(ap->dev, "unexpected trailing data\n"); + + return words << 1; +} + +/* + * pata_s3c_dev_select - Select device on ATA bus + */ +static void pata_s3c_dev_select(struct ata_port *ap, unsigned int device) +{ + u8 tmp = ATA_DEVICE_OBS; + + if (device != 0) + tmp |= ATA_DEV1; + + ata_outb(ap->host, tmp, ap->ioaddr.device_addr); + ata_sff_pause(ap); +} + +/* + * pata_s3c_devchk - PATA device presence detection + */ +static unsigned int pata_s3c_devchk(struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + pata_s3c_dev_select(ap, device); + + ata_outb(ap->host, 0x55, ioaddr->nsect_addr); + ata_outb(ap->host, 0xaa, ioaddr->lbal_addr); + + ata_outb(ap->host, 0xaa, ioaddr->nsect_addr); + ata_outb(ap->host, 0x55, ioaddr->lbal_addr); + + ata_outb(ap->host, 0x55, ioaddr->nsect_addr); + ata_outb(ap->host, 0xaa, ioaddr->lbal_addr); + + nsect = ata_inb(ap->host, ioaddr->nsect_addr); + lbal = ata_inb(ap->host, ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/* + * pata_s3c_wait_after_reset - wait for devices to become ready after reset + */ +static int pata_s3c_wait_after_reset(struct ata_link *link, + unsigned long deadline) +{ + int rc; + + msleep(ATA_WAIT_AFTER_RESET); + + /* always check readiness of the master device */ + rc = ata_sff_wait_ready(link, deadline); + /* -ENODEV means the odd clown forgot the D7 pulldown resistor + * and TF status is 0xff, bail out on it too. + */ + if (rc) + return rc; + + return 0; +} + +/* + * pata_s3c_bus_softreset - PATA device software reset + */ +static unsigned int pata_s3c_bus_softreset(struct ata_port *ap, + unsigned long deadline) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + /* software reset. causes dev0 to be selected */ + ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr); + udelay(20); + ata_outb(ap->host, ap->ctl | ATA_SRST, ioaddr->ctl_addr); + udelay(20); + ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; + + return pata_s3c_wait_after_reset(&ap->link, deadline); +} + +/* + * pata_s3c_softreset - reset host port via ATA SRST + */ +static int pata_s3c_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + unsigned int devmask = 0; + int rc; + u8 err; + + /* determine if device 0 is present */ + if (pata_s3c_devchk(ap, 0)) + devmask |= (1 << 0); + + /* select device 0 again */ + pata_s3c_dev_select(ap, 0); + + /* issue bus reset */ + rc = pata_s3c_bus_softreset(ap, deadline); + /* if link is occupied, -ENODEV too is an error */ + if (rc && rc != -ENODEV) { + ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc); + return rc; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_sff_dev_classify(&ap->link.device[0], + devmask & (1 << 0), &err); + + return 0; +} + +/* + * pata_s3c_set_devctl - Write device control register + */ +static void pata_s3c_set_devctl(struct ata_port *ap, u8 ctl) +{ + ata_outb(ap->host, ctl, ap->ioaddr.ctl_addr); +} + +static struct scsi_host_template pata_s3c_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations pata_s3c_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_check_status = pata_s3c_check_status, + .sff_check_altstatus = pata_s3c_check_altstatus, + .sff_tf_load = pata_s3c_tf_load, + .sff_tf_read = pata_s3c_tf_read, + .sff_data_xfer = pata_s3c_data_xfer, + .sff_exec_command = pata_s3c_exec_command, + .sff_dev_select = pata_s3c_dev_select, + .sff_set_devctl = pata_s3c_set_devctl, + .softreset = pata_s3c_softreset, + .set_piomode = pata_s3c_set_piomode, +}; + +static struct ata_port_operations pata_s5p_port_ops = { + .inherits = &ata_sff_port_ops, + .set_piomode = pata_s3c_set_piomode, +}; + +static void pata_s3c_enable(void *s3c_ide_regbase, bool state) +{ + u32 temp = readl(s3c_ide_regbase + S3C_ATA_CTRL); + temp = state ? (temp | 1) : (temp & ~1); + writel(temp, s3c_ide_regbase + S3C_ATA_CTRL); +} + +static irqreturn_t pata_s3c_irq(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct s3c_ide_info *info = host->private_data; + u32 reg; + + reg = readl(info->ide_addr + S3C_ATA_IRQ); + writel(reg, info->ide_addr + S3C_ATA_IRQ); + + return ata_sff_interrupt(irq, dev_instance); +} + +static void pata_s3c_hwinit(struct s3c_ide_info *info, + struct s3c_ide_platdata *pdata) +{ + switch (info->cpu_type) { + case TYPE_S3C64XX: + /* Configure as big endian */ + pata_s3c_cfg_mode(info->sfr_addr); + pata_s3c_set_endian(info->ide_addr, 1); + pata_s3c_enable(info->ide_addr, true); + msleep(100); + + /* Remove IRQ Status */ + writel(0x1f, info->ide_addr + S3C_ATA_IRQ); + writel(0x1b, info->ide_addr + S3C_ATA_IRQ_MSK); + break; + + case TYPE_S5PC100: + pata_s3c_cfg_mode(info->sfr_addr); + /* FALLTHROUGH */ + + case TYPE_S5PV210: + /* Configure as little endian */ + pata_s3c_set_endian(info->ide_addr, 0); + pata_s3c_enable(info->ide_addr, true); + msleep(100); + + /* Remove IRQ Status */ + writel(0x3f, info->ide_addr + S3C_ATA_IRQ); + writel(0x3f, info->ide_addr + S3C_ATA_IRQ_MSK); + break; + + default: + BUG(); + } +} + +static int __init pata_s3c_probe(struct platform_device *pdev) +{ + struct s3c_ide_platdata *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct s3c_ide_info *info; + struct resource *res; + struct ata_port *ap; + struct ata_host *host; + enum s3c_cpu_type cpu_type; + int ret; + + cpu_type = platform_get_device_id(pdev)->driver_data; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) { + dev_err(dev, "failed to allocate memory for device data\n"); + return -ENOMEM; + } + + info->irq = platform_get_irq(pdev, 0); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "failed to get mem resource\n"); + return -EINVAL; + } + + if (!devm_request_mem_region(dev, res->start, + resource_size(res), DRV_NAME)) { + dev_err(dev, "error requesting register region\n"); + return -EBUSY; + } + + info->ide_addr = devm_ioremap(dev, res->start, resource_size(res)); + if (!info->ide_addr) { + dev_err(dev, "failed to map IO base address\n"); + return -ENOMEM; + } + + info->clk = clk_get(&pdev->dev, "cfcon"); + if (IS_ERR(info->clk)) { + dev_err(dev, "failed to get access to cf controller clock\n"); + ret = PTR_ERR(info->clk); + info->clk = NULL; + return ret; + } + + clk_enable(info->clk); + + /* init ata host */ + host = ata_host_alloc(dev, 1); + if (!host) { + dev_err(dev, "failed to allocate ide host\n"); + ret = -ENOMEM; + goto stop_clk; + } + + ap = host->ports[0]; + ap->flags |= ATA_FLAG_MMIO; + ap->pio_mask = ATA_PIO4; + + if (cpu_type == TYPE_S3C64XX) { + ap->ops = &pata_s3c_port_ops; + info->sfr_addr = info->ide_addr + 0x1800; + info->ide_addr += 0x1900; + info->fifo_status_reg = 0x94; + } else if (cpu_type == TYPE_S5PC100) { + ap->ops = &pata_s5p_port_ops; + info->sfr_addr = info->ide_addr + 0x1800; + info->ide_addr += 0x1900; + info->fifo_status_reg = 0x84; + } else { + ap->ops = &pata_s5p_port_ops; + info->fifo_status_reg = 0x84; + } + + info->cpu_type = cpu_type; + + if (info->irq <= 0) { + ap->flags |= ATA_FLAG_PIO_POLLING; + info->irq = 0; + ata_port_desc(ap, "no IRQ, using PIO polling\n"); + } + + ap->ioaddr.cmd_addr = info->ide_addr + S3C_ATA_CMD; + ap->ioaddr.data_addr = info->ide_addr + S3C_ATA_PIO_DTR; + ap->ioaddr.error_addr = info->ide_addr + S3C_ATA_PIO_FED; + ap->ioaddr.feature_addr = info->ide_addr + S3C_ATA_PIO_FED; + ap->ioaddr.nsect_addr = info->ide_addr + S3C_ATA_PIO_SCR; + ap->ioaddr.lbal_addr = info->ide_addr + S3C_ATA_PIO_LLR; + ap->ioaddr.lbam_addr = info->ide_addr + S3C_ATA_PIO_LMR; + ap->ioaddr.lbah_addr = info->ide_addr + S3C_ATA_PIO_LHR; + ap->ioaddr.device_addr = info->ide_addr + S3C_ATA_PIO_DVR; + ap->ioaddr.status_addr = info->ide_addr + S3C_ATA_PIO_CSD; + ap->ioaddr.command_addr = info->ide_addr + S3C_ATA_PIO_CSD; + ap->ioaddr.altstatus_addr = info->ide_addr + S3C_ATA_PIO_DAD; + ap->ioaddr.ctl_addr = info->ide_addr + S3C_ATA_PIO_DAD; + + ata_port_desc(ap, "mmio cmd 0x%llx ", + (unsigned long long)res->start); + + host->private_data = info; + + if (pdata && pdata->setup_gpio) + pdata->setup_gpio(); + + /* Set endianness and enable the interface */ + pata_s3c_hwinit(info, pdata); + + platform_set_drvdata(pdev, host); + + return ata_host_activate(host, info->irq, + info->irq ? pata_s3c_irq : NULL, + 0, &pata_s3c_sht); + +stop_clk: + clk_disable(info->clk); + clk_put(info->clk); + return ret; +} + +static int __exit pata_s3c_remove(struct platform_device *pdev) +{ + struct ata_host *host = platform_get_drvdata(pdev); + struct s3c_ide_info *info = host->private_data; + + ata_host_detach(host); + + clk_disable(info->clk); + clk_put(info->clk); + + return 0; +} + +#ifdef CONFIG_PM +static int pata_s3c_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ata_host *host = platform_get_drvdata(pdev); + + return ata_host_suspend(host, PMSG_SUSPEND); +} + +static int pata_s3c_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ata_host *host = platform_get_drvdata(pdev); + struct s3c_ide_platdata *pdata = pdev->dev.platform_data; + struct s3c_ide_info *info = host->private_data; + + pata_s3c_hwinit(info, pdata); + ata_host_resume(host); + + return 0; +} + +static const struct dev_pm_ops pata_s3c_pm_ops = { + .suspend = pata_s3c_suspend, + .resume = pata_s3c_resume, +}; +#endif + +/* driver device registration */ +static struct platform_device_id pata_s3c_driver_ids[] = { + { + .name = "s3c64xx-pata", + .driver_data = TYPE_S3C64XX, + }, { + .name = "s5pc100-pata", + .driver_data = TYPE_S5PC100, + }, { + .name = "s5pv210-pata", + .driver_data = TYPE_S5PV210, + }, + { } +}; + +MODULE_DEVICE_TABLE(platform, pata_s3c_driver_ids); + +static struct platform_driver pata_s3c_driver = { + .remove = __exit_p(pata_s3c_remove), + .id_table = pata_s3c_driver_ids, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &pata_s3c_pm_ops, +#endif + }, +}; + +static int __init pata_s3c_init(void) +{ + return platform_driver_probe(&pata_s3c_driver, pata_s3c_probe); +} + +static void __exit pata_s3c_exit(void) +{ + platform_driver_unregister(&pata_s3c_driver); +} + +module_init(pata_s3c_init); +module_exit(pata_s3c_exit); + +MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>"); +MODULE_DESCRIPTION("low-level driver for Samsung PATA controller"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index d9db3f8..fe36966 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -168,8 +168,7 @@ static const unsigned long JCACTSELtbl[2][7] = { }; static const struct pci_device_id scc_pci_tbl[] = { - {PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0}, { } /* terminate list */ }; diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c new file mode 100644 index 0000000..ea24c1e --- /dev/null +++ b/drivers/ata/sata_dwc_460ex.c @@ -0,0 +1,1756 @@ +/* + * drivers/ata/sata_dwc_460ex.c + * + * Synopsys DesignWare Cores (DWC) SATA host driver + * + * Author: Mark Miesfeld <mmiesfeld@amcc.com> + * + * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de> + * Copyright 2008 DENX Software Engineering + * + * Based on versions provided by AMCC and Synopsys which are: + * Copyright 2006 Applied Micro Circuits Corporation + * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef CONFIG_SATA_DWC_DEBUG +#define DEBUG +#endif + +#ifdef CONFIG_SATA_DWC_VDEBUG +#define VERBOSE_DEBUG +#define DEBUG_NCQ +#endif + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/libata.h> +#include <linux/slab.h> +#include "libata.h" + +#include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> + +#define DRV_NAME "sata-dwc" +#define DRV_VERSION "1.0" + +/* SATA DMA driver Globals */ +#define DMA_NUM_CHANS 1 +#define DMA_NUM_CHAN_REGS 8 + +/* SATA DMA Register definitions */ +#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/ + +struct dmareg { + u32 low; /* Low bits 0-31 */ + u32 high; /* High bits 32-63 */ +}; + +/* DMA Per Channel registers */ +struct dma_chan_regs { + struct dmareg sar; /* Source Address */ + struct dmareg dar; /* Destination address */ + struct dmareg llp; /* Linked List Pointer */ + struct dmareg ctl; /* Control */ + struct dmareg sstat; /* Source Status not implemented in core */ + struct dmareg dstat; /* Destination Status not implemented in core*/ + struct dmareg sstatar; /* Source Status Address not impl in core */ + struct dmareg dstatar; /* Destination Status Address not implemente */ + struct dmareg cfg; /* Config */ + struct dmareg sgr; /* Source Gather */ + struct dmareg dsr; /* Destination Scatter */ +}; + +/* Generic Interrupt Registers */ +struct dma_interrupt_regs { + struct dmareg tfr; /* Transfer Interrupt */ + struct dmareg block; /* Block Interrupt */ + struct dmareg srctran; /* Source Transfer Interrupt */ + struct dmareg dsttran; /* Dest Transfer Interrupt */ + struct dmareg error; /* Error */ +}; + +struct ahb_dma_regs { + struct dma_chan_regs chan_regs[DMA_NUM_CHAN_REGS]; + struct dma_interrupt_regs interrupt_raw; /* Raw Interrupt */ + struct dma_interrupt_regs interrupt_status; /* Interrupt Status */ + struct dma_interrupt_regs interrupt_mask; /* Interrupt Mask */ + struct dma_interrupt_regs interrupt_clear; /* Interrupt Clear */ + struct dmareg statusInt; /* Interrupt combined*/ + struct dmareg rq_srcreg; /* Src Trans Req */ + struct dmareg rq_dstreg; /* Dst Trans Req */ + struct dmareg rq_sgl_srcreg; /* Sngl Src Trans Req*/ + struct dmareg rq_sgl_dstreg; /* Sngl Dst Trans Req*/ + struct dmareg rq_lst_srcreg; /* Last Src Trans Req*/ + struct dmareg rq_lst_dstreg; /* Last Dst Trans Req*/ + struct dmareg dma_cfg; /* DMA Config */ + struct dmareg dma_chan_en; /* DMA Channel Enable*/ + struct dmareg dma_id; /* DMA ID */ + struct dmareg dma_test; /* DMA Test */ + struct dmareg res1; /* reserved */ + struct dmareg res2; /* reserved */ + /* + * DMA Comp Params + * Param 6 = dma_param[0], Param 5 = dma_param[1], + * Param 4 = dma_param[2] ... + */ + struct dmareg dma_params[6]; +}; + +/* Data structure for linked list item */ +struct lli { + u32 sar; /* Source Address */ + u32 dar; /* Destination address */ + u32 llp; /* Linked List Pointer */ + struct dmareg ctl; /* Control */ + struct dmareg dstat; /* Destination Status */ +}; + +enum { + SATA_DWC_DMAC_LLI_SZ = (sizeof(struct lli)), + SATA_DWC_DMAC_LLI_NUM = 256, + SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \ + SATA_DWC_DMAC_LLI_NUM), + SATA_DWC_DMAC_TWIDTH_BYTES = 4, + SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \ + SATA_DWC_DMAC_TWIDTH_BYTES), +}; + +/* DMA Register Operation Bits */ +enum { + DMA_EN = 0x00000001, /* Enable AHB DMA */ + DMA_CTL_LLP_SRCEN = 0x10000000, /* Blk chain enable Src */ + DMA_CTL_LLP_DSTEN = 0x08000000, /* Blk chain enable Dst */ +}; + +#define DMA_CTL_BLK_TS(size) ((size) & 0x000000FFF) /* Blk Transfer size */ +#define DMA_CHANNEL(ch) (0x00000001 << (ch)) /* Select channel */ + /* Enable channel */ +#define DMA_ENABLE_CHAN(ch) ((0x00000001 << (ch)) | \ + ((0x000000001 << (ch)) << 8)) + /* Disable channel */ +#define DMA_DISABLE_CHAN(ch) (0x00000000 | ((0x000000001 << (ch)) << 8)) + /* Transfer Type & Flow Controller */ +#define DMA_CTL_TTFC(type) (((type) & 0x7) << 20) +#define DMA_CTL_SMS(num) (((num) & 0x3) << 25) /* Src Master Select */ +#define DMA_CTL_DMS(num) (((num) & 0x3) << 23)/* Dst Master Select */ + /* Src Burst Transaction Length */ +#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14) + /* Dst Burst Transaction Length */ +#define DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11) + /* Source Transfer Width */ +#define DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4) + /* Destination Transfer Width */ +#define DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1) + +/* Assign HW handshaking interface (x) to destination / source peripheral */ +#define DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11) +#define DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7) +#define DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master)) + +/* + * This define is used to set block chaining disabled in the control low + * register. It is already in little endian format so it can be &'d dirctly. + * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN)) + */ +enum { + DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7, + DMA_CTL_TTFC_P2M_DMAC = 0x00000002, /* Per to mem, DMAC cntr */ + DMA_CTL_TTFC_M2P_PER = 0x00000003, /* Mem to per, peripheral cntr */ + DMA_CTL_SINC_INC = 0x00000000, /* Source Address Increment */ + DMA_CTL_SINC_DEC = 0x00000200, + DMA_CTL_SINC_NOCHANGE = 0x00000400, + DMA_CTL_DINC_INC = 0x00000000, /* Destination Address Increment */ + DMA_CTL_DINC_DEC = 0x00000080, + DMA_CTL_DINC_NOCHANGE = 0x00000100, + DMA_CTL_INT_EN = 0x00000001, /* Interrupt Enable */ + +/* Channel Configuration Register high bits */ + DMA_CFG_FCMOD_REQ = 0x00000001, /* Flow Control - request based */ + DMA_CFG_PROTCTL = (0x00000003 << 2),/* Protection Control */ + +/* Channel Configuration Register low bits */ + DMA_CFG_RELD_DST = 0x80000000, /* Reload Dest / Src Addr */ + DMA_CFG_RELD_SRC = 0x40000000, + DMA_CFG_HS_SELSRC = 0x00000800, /* Software handshake Src/ Dest */ + DMA_CFG_HS_SELDST = 0x00000400, + DMA_CFG_FIFOEMPTY = (0x00000001 << 9), /* FIFO Empty bit */ + +/* Channel Linked List Pointer Register */ + DMA_LLP_AHBMASTER1 = 0, /* List Master Select */ + DMA_LLP_AHBMASTER2 = 1, + + SATA_DWC_MAX_PORTS = 1, + + SATA_DWC_SCR_OFFSET = 0x24, + SATA_DWC_REG_OFFSET = 0x64, +}; + +/* DWC SATA Registers */ +struct sata_dwc_regs { + u32 fptagr; /* 1st party DMA tag */ + u32 fpbor; /* 1st party DMA buffer offset */ + u32 fptcr; /* 1st party DMA Xfr count */ + u32 dmacr; /* DMA Control */ + u32 dbtsr; /* DMA Burst Transac size */ + u32 intpr; /* Interrupt Pending */ + u32 intmr; /* Interrupt Mask */ + u32 errmr; /* Error Mask */ + u32 llcr; /* Link Layer Control */ + u32 phycr; /* PHY Control */ + u32 physr; /* PHY Status */ + u32 rxbistpd; /* Recvd BIST pattern def register */ + u32 rxbistpd1; /* Recvd BIST data dword1 */ + u32 rxbistpd2; /* Recvd BIST pattern data dword2 */ + u32 txbistpd; /* Trans BIST pattern def register */ + u32 txbistpd1; /* Trans BIST data dword1 */ + u32 txbistpd2; /* Trans BIST data dword2 */ + u32 bistcr; /* BIST Control Register */ + u32 bistfctr; /* BIST FIS Count Register */ + u32 bistsr; /* BIST Status Register */ + u32 bistdecr; /* BIST Dword Error count register */ + u32 res[15]; /* Reserved locations */ + u32 testr; /* Test Register */ + u32 versionr; /* Version Register */ + u32 idr; /* ID Register */ + u32 unimpl[192]; /* Unimplemented */ + u32 dmadr[256]; /* FIFO Locations in DMA Mode */ +}; + +enum { + SCR_SCONTROL_DET_ENABLE = 0x00000001, + SCR_SSTATUS_DET_PRESENT = 0x00000001, + SCR_SERROR_DIAG_X = 0x04000000, +/* DWC SATA Register Operations */ + SATA_DWC_TXFIFO_DEPTH = 0x01FF, + SATA_DWC_RXFIFO_DEPTH = 0x01FF, + SATA_DWC_DMACR_TMOD_TXCHEN = 0x00000004, + SATA_DWC_DMACR_TXCHEN = (0x00000001 | SATA_DWC_DMACR_TMOD_TXCHEN), + SATA_DWC_DMACR_RXCHEN = (0x00000002 | SATA_DWC_DMACR_TMOD_TXCHEN), + SATA_DWC_DMACR_TXRXCH_CLEAR = SATA_DWC_DMACR_TMOD_TXCHEN, + SATA_DWC_INTPR_DMAT = 0x00000001, + SATA_DWC_INTPR_NEWFP = 0x00000002, + SATA_DWC_INTPR_PMABRT = 0x00000004, + SATA_DWC_INTPR_ERR = 0x00000008, + SATA_DWC_INTPR_NEWBIST = 0x00000010, + SATA_DWC_INTPR_IPF = 0x10000000, + SATA_DWC_INTMR_DMATM = 0x00000001, + SATA_DWC_INTMR_NEWFPM = 0x00000002, + SATA_DWC_INTMR_PMABRTM = 0x00000004, + SATA_DWC_INTMR_ERRM = 0x00000008, + SATA_DWC_INTMR_NEWBISTM = 0x00000010, + SATA_DWC_LLCR_SCRAMEN = 0x00000001, + SATA_DWC_LLCR_DESCRAMEN = 0x00000002, + SATA_DWC_LLCR_RPDEN = 0x00000004, +/* This is all error bits, zero's are reserved fields. */ + SATA_DWC_SERROR_ERR_BITS = 0x0FFF0F03 +}; + +#define SATA_DWC_SCR0_SPD_GET(v) (((v) >> 4) & 0x0000000F) +#define SATA_DWC_DMACR_TX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_TXCHEN) |\ + SATA_DWC_DMACR_TMOD_TXCHEN) +#define SATA_DWC_DMACR_RX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_RXCHEN) |\ + SATA_DWC_DMACR_TMOD_TXCHEN) +#define SATA_DWC_DBTSR_MWR(size) (((size)/4) & SATA_DWC_TXFIFO_DEPTH) +#define SATA_DWC_DBTSR_MRD(size) ((((size)/4) & SATA_DWC_RXFIFO_DEPTH)\ + << 16) +struct sata_dwc_device { + struct device *dev; /* generic device struct */ + struct ata_probe_ent *pe; /* ptr to probe-ent */ + struct ata_host *host; + u8 *reg_base; + struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */ + int irq_dma; +}; + +#define SATA_DWC_QCMD_MAX 32 + +struct sata_dwc_device_port { + struct sata_dwc_device *hsdev; + int cmd_issued[SATA_DWC_QCMD_MAX]; + struct lli *llit[SATA_DWC_QCMD_MAX]; /* DMA LLI table */ + dma_addr_t llit_dma[SATA_DWC_QCMD_MAX]; + u32 dma_chan[SATA_DWC_QCMD_MAX]; + int dma_pending[SATA_DWC_QCMD_MAX]; +}; + +/* + * Commonly used DWC SATA driver Macros + */ +#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)\ + (host)->private_data) +#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)\ + (ap)->host->private_data) +#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)\ + (ap)->private_data) +#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)\ + (qc)->ap->host->private_data) +#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)\ + (hsdevp)->hsdev) + +enum { + SATA_DWC_CMD_ISSUED_NOT = 0, + SATA_DWC_CMD_ISSUED_PEND = 1, + SATA_DWC_CMD_ISSUED_EXEC = 2, + SATA_DWC_CMD_ISSUED_NODATA = 3, + + SATA_DWC_DMA_PENDING_NONE = 0, + SATA_DWC_DMA_PENDING_TX = 1, + SATA_DWC_DMA_PENDING_RX = 2, +}; + +struct sata_dwc_host_priv { + void __iomem *scr_addr_sstatus; + u32 sata_dwc_sactive_issued ; + u32 sata_dwc_sactive_queued ; + u32 dma_interrupt_count; + struct ahb_dma_regs *sata_dma_regs; + struct device *dwc_dev; +}; +struct sata_dwc_host_priv host_pvt; +/* + * Prototypes + */ +static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag); +static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc, + u32 check_status); +static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status); +static void sata_dwc_port_stop(struct ata_port *ap); +static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag); +static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq); +static void dma_dwc_exit(struct sata_dwc_device *hsdev); +static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems, + struct lli *lli, dma_addr_t dma_lli, + void __iomem *addr, int dir); +static void dma_dwc_xfer_start(int dma_ch); + +static void sata_dwc_tf_dump(struct ata_taskfile *tf) +{ + dev_vdbg(host_pvt.dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags:" + "0x%lx device: %x\n", tf->command, ata_get_cmd_descript\ + (tf->protocol), tf->flags, tf->device); + dev_vdbg(host_pvt.dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x " + "lbam: 0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal, + tf->lbam, tf->lbah); + dev_vdbg(host_pvt.dwc_dev, "hob_feature: 0x%02x hob_nsect: 0x%x " + "hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n", + tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam, + tf->hob_lbah); +} + +/* + * Function: get_burst_length_encode + * arguments: datalength: length in bytes of data + * returns value to be programmed in register corrresponding to data length + * This value is effectively the log(base 2) of the length + */ +static int get_burst_length_encode(int datalength) +{ + int items = datalength >> 2; /* div by 4 to get lword count */ + + if (items >= 64) + return 5; + + if (items >= 32) + return 4; + + if (items >= 16) + return 3; + + if (items >= 8) + return 2; + + if (items >= 4) + return 1; + + return 0; +} + +static void clear_chan_interrupts(int c) +{ + out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.tfr.low), + DMA_CHANNEL(c)); + out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.block.low), + DMA_CHANNEL(c)); + out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.srctran.low), + DMA_CHANNEL(c)); + out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.dsttran.low), + DMA_CHANNEL(c)); + out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.error.low), + DMA_CHANNEL(c)); +} + +/* + * Function: dma_request_channel + * arguments: None + * returns channel number if available else -1 + * This function assigns the next available DMA channel from the list to the + * requester + */ +static int dma_request_channel(void) +{ + int i; + + for (i = 0; i < DMA_NUM_CHANS; i++) { + if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &\ + DMA_CHANNEL(i))) + return i; + } + dev_err(host_pvt.dwc_dev, "%s NO channel chan_en: 0x%08x\n", __func__, + in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low))); + return -1; +} + +/* + * Function: dma_dwc_interrupt + * arguments: irq, dev_id, pt_regs + * returns channel number if available else -1 + * Interrupt Handler for DW AHB SATA DMA + */ +static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance) +{ + int chan; + u32 tfr_reg, err_reg; + unsigned long flags; + struct sata_dwc_device *hsdev = + (struct sata_dwc_device *)hsdev_instance; + struct ata_host *host = (struct ata_host *)hsdev->host; + struct ata_port *ap; + struct sata_dwc_device_port *hsdevp; + u8 tag = 0; + unsigned int port = 0; + + spin_lock_irqsave(&host->lock, flags); + ap = host->ports[port]; + hsdevp = HSDEVP_FROM_AP(ap); + tag = ap->link.active_tag; + + tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr\ + .low)); + err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error\ + .low)); + + dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n", + tfr_reg, err_reg, hsdevp->dma_pending[tag], port); + + for (chan = 0; chan < DMA_NUM_CHANS; chan++) { + /* Check for end-of-transfer interrupt. */ + if (tfr_reg & DMA_CHANNEL(chan)) { + /* + * Each DMA command produces 2 interrupts. Only + * complete the command after both interrupts have been + * seen. (See sata_dwc_isr()) + */ + host_pvt.dma_interrupt_count++; + sata_dwc_clear_dmacr(hsdevp, tag); + + if (hsdevp->dma_pending[tag] == + SATA_DWC_DMA_PENDING_NONE) { + dev_err(ap->dev, "DMA not pending eot=0x%08x " + "err=0x%08x tag=0x%02x pending=%d\n", + tfr_reg, err_reg, tag, + hsdevp->dma_pending[tag]); + } + + if ((host_pvt.dma_interrupt_count % 2) == 0) + sata_dwc_dma_xfer_complete(ap, 1); + + /* Clear the interrupt */ + out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\ + .tfr.low), + DMA_CHANNEL(chan)); + } + + /* Check for error interrupt. */ + if (err_reg & DMA_CHANNEL(chan)) { + /* TODO Need error handler ! */ + dev_err(ap->dev, "error interrupt err_reg=0x%08x\n", + err_reg); + + /* Clear the interrupt. */ + out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\ + .error.low), + DMA_CHANNEL(chan)); + } + } + spin_unlock_irqrestore(&host->lock, flags); + return IRQ_HANDLED; +} + +/* + * Function: dma_request_interrupts + * arguments: hsdev + * returns status + * This function registers ISR for a particular DMA channel interrupt + */ +static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq) +{ + int retval = 0; + int chan; + + for (chan = 0; chan < DMA_NUM_CHANS; chan++) { + /* Unmask error interrupt */ + out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low, + DMA_ENABLE_CHAN(chan)); + + /* Unmask end-of-transfer interrupt */ + out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low, + DMA_ENABLE_CHAN(chan)); + } + + retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev); + if (retval) { + dev_err(host_pvt.dwc_dev, "%s: could not get IRQ %d\n", + __func__, irq); + return -ENODEV; + } + + /* Mark this interrupt as requested */ + hsdev->irq_dma = irq; + return 0; +} + +/* + * Function: map_sg_to_lli + * The Synopsis driver has a comment proposing that better performance + * is possible by only enabling interrupts on the last item in the linked list. + * However, it seems that could be a problem if an error happened on one of the + * first items. The transfer would halt, but no error interrupt would occur. + * Currently this function sets interrupts enabled for each linked list item: + * DMA_CTL_INT_EN. + */ +static int map_sg_to_lli(struct scatterlist *sg, int num_elems, + struct lli *lli, dma_addr_t dma_lli, + void __iomem *dmadr_addr, int dir) +{ + int i, idx = 0; + int fis_len = 0; + dma_addr_t next_llp; + int bl; + + dev_dbg(host_pvt.dwc_dev, "%s: sg=%p nelem=%d lli=%p dma_lli=0x%08x" + " dmadr=0x%08x\n", __func__, sg, num_elems, lli, (u32)dma_lli, + (u32)dmadr_addr); + + bl = get_burst_length_encode(AHB_DMA_BRST_DFLT); + + for (i = 0; i < num_elems; i++, sg++) { + u32 addr, offset; + u32 sg_len, len; + + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len" + "=%d\n", __func__, i, addr, sg_len); + + while (sg_len) { + if (idx >= SATA_DWC_DMAC_LLI_NUM) { + /* The LLI table is not large enough. */ + dev_err(host_pvt.dwc_dev, "LLI table overrun " + "(idx=%d)\n", idx); + break; + } + len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ? + SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len; + + offset = addr & 0xffff; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + /* + * Make sure a LLI block is not created that will span + * 8K max FIS boundary. If the block spans such a FIS + * boundary, there is a chance that a DMA burst will + * cross that boundary -- this results in an error in + * the host controller. + */ + if (fis_len + len > 8192) { + dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len=" + "%d(0x%x) len=%d(0x%x)\n", fis_len, + fis_len, len, len); + len = 8192 - fis_len; + fis_len = 0; + } else { + fis_len += len; + } + if (fis_len == 8192) + fis_len = 0; + + /* + * Set DMA addresses and lower half of control register + * based on direction. + */ + if (dir == DMA_FROM_DEVICE) { + lli[idx].dar = cpu_to_le32(addr); + lli[idx].sar = cpu_to_le32((u32)dmadr_addr); + + lli[idx].ctl.low = cpu_to_le32( + DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) | + DMA_CTL_SMS(0) | + DMA_CTL_DMS(1) | + DMA_CTL_SRC_MSIZE(bl) | + DMA_CTL_DST_MSIZE(bl) | + DMA_CTL_SINC_NOCHANGE | + DMA_CTL_SRC_TRWID(2) | + DMA_CTL_DST_TRWID(2) | + DMA_CTL_INT_EN | + DMA_CTL_LLP_SRCEN | + DMA_CTL_LLP_DSTEN); + } else { /* DMA_TO_DEVICE */ + lli[idx].sar = cpu_to_le32(addr); + lli[idx].dar = cpu_to_le32((u32)dmadr_addr); + + lli[idx].ctl.low = cpu_to_le32( + DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) | + DMA_CTL_SMS(1) | + DMA_CTL_DMS(0) | + DMA_CTL_SRC_MSIZE(bl) | + DMA_CTL_DST_MSIZE(bl) | + DMA_CTL_DINC_NOCHANGE | + DMA_CTL_SRC_TRWID(2) | + DMA_CTL_DST_TRWID(2) | + DMA_CTL_INT_EN | + DMA_CTL_LLP_SRCEN | + DMA_CTL_LLP_DSTEN); + } + + dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: " + "0x%08x val: 0x%08x\n", __func__, + len, DMA_CTL_BLK_TS(len / 4)); + + /* Program the LLI CTL high register */ + lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS\ + (len / 4)); + + /* Program the next pointer. The next pointer must be + * the physical address, not the virtual address. + */ + next_llp = (dma_lli + ((idx + 1) * sizeof(struct \ + lli))); + + /* The last 2 bits encode the list master select. */ + next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2); + + lli[idx].llp = cpu_to_le32(next_llp); + idx++; + sg_len -= len; + addr += len; + } + } + + /* + * The last next ptr has to be zero and the last control low register + * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source + * and destination enable) set back to 0 (disabled.) This is what tells + * the core that this is the last item in the linked list. + */ + if (idx) { + lli[idx-1].llp = 0x00000000; + lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32; + + /* Flush cache to memory */ + dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx), + DMA_BIDIRECTIONAL); + } + + return idx; +} + +/* + * Function: dma_dwc_xfer_start + * arguments: Channel number + * Return : None + * Enables the DMA channel + */ +static void dma_dwc_xfer_start(int dma_ch) +{ + /* Enable the DMA channel */ + out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low), + in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) | + DMA_ENABLE_CHAN(dma_ch)); +} + +static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems, + struct lli *lli, dma_addr_t dma_lli, + void __iomem *addr, int dir) +{ + int dma_ch; + int num_lli; + /* Acquire DMA channel */ + dma_ch = dma_request_channel(); + if (dma_ch == -1) { + dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n", + __func__); + return -EAGAIN; + } + + /* Convert SG list to linked list of items (LLIs) for AHB DMA */ + num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir); + + dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:" + " 0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems, + lli, (u32)dma_lli, addr, num_lli); + + clear_chan_interrupts(dma_ch); + + /* Program the CFG register. */ + out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high), + DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ); + out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low), 0); + + /* Program the address of the linked list */ + out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low), + DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2)); + + /* Program the CTL register with src enable / dst enable */ + out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low), + DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN); + return 0; +} + +/* + * Function: dma_dwc_exit + * arguments: None + * returns status + * This function exits the SATA DMA driver + */ +static void dma_dwc_exit(struct sata_dwc_device *hsdev) +{ + dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__); + if (host_pvt.sata_dma_regs) + iounmap(host_pvt.sata_dma_regs); + + if (hsdev->irq_dma) + free_irq(hsdev->irq_dma, hsdev); +} + +/* + * Function: dma_dwc_init + * arguments: hsdev + * returns status + * This function initializes the SATA DMA driver + */ +static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq) +{ + int err; + + err = dma_request_interrupts(hsdev, irq); + if (err) { + dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns" + " %d\n", __func__, err); + goto error_out; + } + + /* Enabe DMA */ + out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN); + + dev_notice(host_pvt.dwc_dev, "DMA initialized\n"); + dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n", host_pvt.\ + sata_dma_regs); + + return 0; + +error_out: + dma_dwc_exit(hsdev); + + return err; +} + +static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + if (scr > SCR_NOTIFICATION) { + dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n", + __func__, scr); + return -EINVAL; + } + + *val = in_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4)); + dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n", + __func__, link->ap->print_id, scr, *val); + + return 0; +} + +static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n", + __func__, link->ap->print_id, scr, val); + if (scr > SCR_NOTIFICATION) { + dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n", + __func__, scr); + return -EINVAL; + } + out_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4), val); + + return 0; +} + +static u32 core_scr_read(unsigned int scr) +{ + return in_le32((void __iomem *)(host_pvt.scr_addr_sstatus) +\ + (scr * 4)); +} + +static void core_scr_write(unsigned int scr, u32 val) +{ + out_le32((void __iomem *)(host_pvt.scr_addr_sstatus) + (scr * 4), + val); +} + +static void clear_serror(void) +{ + u32 val; + val = core_scr_read(SCR_ERROR); + core_scr_write(SCR_ERROR, val); + +} + +static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit) +{ + out_le32(&hsdev->sata_dwc_regs->intpr, + in_le32(&hsdev->sata_dwc_regs->intpr)); +} + +static u32 qcmd_tag_to_mask(u8 tag) +{ + return 0x00000001 << (tag & 0x1f); +} + +/* See ahci.c */ +static void sata_dwc_error_intr(struct ata_port *ap, + struct sata_dwc_device *hsdev, uint intpr) +{ + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + struct ata_eh_info *ehi = &ap->link.eh_info; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + u32 serror; + u8 status, tag; + u32 err_reg; + + ata_ehi_clear_desc(ehi); + + serror = core_scr_read(SCR_ERROR); + status = ap->ops->sff_check_status(ap); + + err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error.\ + low)); + tag = ap->link.active_tag; + + dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x " + "dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n", + __func__, serror, intpr, status, host_pvt.dma_interrupt_count, + hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg); + + /* Clear error register and interrupt bit */ + clear_serror(); + clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR); + + /* This is the only error happening now. TODO check for exact error */ + + err_mask |= AC_ERR_HOST_BUS; + action |= ATA_EH_RESET; + + /* Pass this on to EH */ + ehi->serror |= serror; + ehi->action |= action; + + qc = ata_qc_from_tag(ap, tag); + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + ata_port_abort(ap); +} + +/* + * Function : sata_dwc_isr + * arguments : irq, void *dev_instance, struct pt_regs *regs + * Return value : irqreturn_t - status of IRQ + * This Interrupt handler called via port ops registered function. + * .irq_handler = sata_dwc_isr + */ +static irqreturn_t sata_dwc_isr(int irq, void *dev_instance) +{ + struct ata_host *host = (struct ata_host *)dev_instance; + struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host); + struct ata_port *ap; + struct ata_queued_cmd *qc; + unsigned long flags; + u8 status, tag; + int handled, num_processed, port = 0; + uint intpr, sactive, sactive2, tag_mask; + struct sata_dwc_device_port *hsdevp; + host_pvt.sata_dwc_sactive_issued = 0; + + spin_lock_irqsave(&host->lock, flags); + + /* Read the interrupt register */ + intpr = in_le32(&hsdev->sata_dwc_regs->intpr); + + ap = host->ports[port]; + hsdevp = HSDEVP_FROM_AP(ap); + + dev_dbg(ap->dev, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr, + ap->link.active_tag); + + /* Check for error interrupt */ + if (intpr & SATA_DWC_INTPR_ERR) { + sata_dwc_error_intr(ap, hsdev, intpr); + handled = 1; + goto DONE; + } + + /* Check for DMA SETUP FIS (FP DMA) interrupt */ + if (intpr & SATA_DWC_INTPR_NEWFP) { + clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP); + + tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr)); + dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag); + if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND) + dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag); + + host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag); + + qc = ata_qc_from_tag(ap, tag); + /* + * Start FP DMA for NCQ command. At this point the tag is the + * active tag. It is the tag that matches the command about to + * be completed. + */ + qc->ap->link.active_tag = tag; + sata_dwc_bmdma_start_by_tag(qc, tag); + + handled = 1; + goto DONE; + } + sactive = core_scr_read(SCR_ACTIVE); + tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive; + + /* If no sactive issued and tag_mask is zero then this is not NCQ */ + if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) { + if (ap->link.active_tag == ATA_TAG_POISON) + tag = 0; + else + tag = ap->link.active_tag; + qc = ata_qc_from_tag(ap, tag); + + /* DEV interrupt w/ no active qc? */ + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + dev_err(ap->dev, "%s interrupt with no active qc " + "qc=%p\n", __func__, qc); + ap->ops->sff_check_status(ap); + handled = 1; + goto DONE; + } + status = ap->ops->sff_check_status(ap); + + qc->ap->link.active_tag = tag; + hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT; + + if (status & ATA_ERR) { + dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status); + sata_dwc_qc_complete(ap, qc, 1); + handled = 1; + goto DONE; + } + + dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n", + __func__, ata_get_cmd_descript(qc->tf.protocol)); +DRVSTILLBUSY: + if (ata_is_dma(qc->tf.protocol)) { + /* + * Each DMA transaction produces 2 interrupts. The DMAC + * transfer complete interrupt and the SATA controller + * operation done interrupt. The command should be + * completed only after both interrupts are seen. + */ + host_pvt.dma_interrupt_count++; + if (hsdevp->dma_pending[tag] == \ + SATA_DWC_DMA_PENDING_NONE) { + dev_err(ap->dev, "%s: DMA not pending " + "intpr=0x%08x status=0x%08x pending" + "=%d\n", __func__, intpr, status, + hsdevp->dma_pending[tag]); + } + + if ((host_pvt.dma_interrupt_count % 2) == 0) + sata_dwc_dma_xfer_complete(ap, 1); + } else if (ata_is_pio(qc->tf.protocol)) { + ata_sff_hsm_move(ap, qc, status, 0); + handled = 1; + goto DONE; + } else { + if (unlikely(sata_dwc_qc_complete(ap, qc, 1))) + goto DRVSTILLBUSY; + } + + handled = 1; + goto DONE; + } + + /* + * This is a NCQ command. At this point we need to figure out for which + * tags we have gotten a completion interrupt. One interrupt may serve + * as completion for more than one operation when commands are queued + * (NCQ). We need to process each completed command. + */ + + /* process completed commands */ + sactive = core_scr_read(SCR_ACTIVE); + tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive; + + if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \ + tag_mask > 1) { + dev_dbg(ap->dev, "%s NCQ:sactive=0x%08x sactive_issued=0x%08x" + "tag_mask=0x%08x\n", __func__, sactive, + host_pvt.sata_dwc_sactive_issued, tag_mask); + } + + if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \ + (host_pvt.sata_dwc_sactive_issued)) { + dev_warn(ap->dev, "Bad tag mask? sactive=0x%08x " + "(host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask" + "=0x%08x\n", sactive, host_pvt.sata_dwc_sactive_issued, + tag_mask); + } + + /* read just to clear ... not bad if currently still busy */ + status = ap->ops->sff_check_status(ap); + dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status); + + tag = 0; + num_processed = 0; + while (tag_mask) { + num_processed++; + while (!(tag_mask & 0x00000001)) { + tag++; + tag_mask <<= 1; + } + + tag_mask &= (~0x00000001); + qc = ata_qc_from_tag(ap, tag); + + /* To be picked up by completion functions */ + qc->ap->link.active_tag = tag; + hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT; + + /* Let libata/scsi layers handle error */ + if (status & ATA_ERR) { + dev_dbg(ap->dev, "%s ATA_ERR (0x%x)\n", __func__, + status); + sata_dwc_qc_complete(ap, qc, 1); + handled = 1; + goto DONE; + } + + /* Process completed command */ + dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__, + ata_get_cmd_descript(qc->tf.protocol)); + if (ata_is_dma(qc->tf.protocol)) { + host_pvt.dma_interrupt_count++; + if (hsdevp->dma_pending[tag] == \ + SATA_DWC_DMA_PENDING_NONE) + dev_warn(ap->dev, "%s: DMA not pending?\n", + __func__); + if ((host_pvt.dma_interrupt_count % 2) == 0) + sata_dwc_dma_xfer_complete(ap, 1); + } else { + if (unlikely(sata_dwc_qc_complete(ap, qc, 1))) + goto STILLBUSY; + } + continue; + +STILLBUSY: + ap->stats.idle_irq++; + dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n", + ap->print_id); + } /* while tag_mask */ + + /* + * Check to see if any commands completed while we were processing our + * initial set of completed commands (read status clears interrupts, + * so we might miss a completed command interrupt if one came in while + * we were processing --we read status as part of processing a completed + * command). + */ + sactive2 = core_scr_read(SCR_ACTIVE); + if (sactive2 != sactive) { + dev_dbg(ap->dev, "More completed - sactive=0x%x sactive2" + "=0x%x\n", sactive, sactive2); + } + handled = 1; + +DONE: + spin_unlock_irqrestore(&host->lock, flags); + return IRQ_RETVAL(handled); +} + +static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag) +{ + struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp); + + if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) { + out_le32(&(hsdev->sata_dwc_regs->dmacr), + SATA_DWC_DMACR_RX_CLEAR( + in_le32(&(hsdev->sata_dwc_regs->dmacr)))); + } else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) { + out_le32(&(hsdev->sata_dwc_regs->dmacr), + SATA_DWC_DMACR_TX_CLEAR( + in_le32(&(hsdev->sata_dwc_regs->dmacr)))); + } else { + /* + * This should not happen, it indicates the driver is out of + * sync. If it does happen, clear dmacr anyway. + */ + dev_err(host_pvt.dwc_dev, "%s DMA protocol RX and" + "TX DMA not pending tag=0x%02x pending=%d" + " dmacr: 0x%08x\n", __func__, tag, + hsdevp->dma_pending[tag], + in_le32(&(hsdev->sata_dwc_regs->dmacr))); + out_le32(&(hsdev->sata_dwc_regs->dmacr), + SATA_DWC_DMACR_TXRXCH_CLEAR); + } +} + +static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status) +{ + struct ata_queued_cmd *qc; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); + u8 tag = 0; + + tag = ap->link.active_tag; + qc = ata_qc_from_tag(ap, tag); + if (!qc) { + dev_err(ap->dev, "failed to get qc"); + return; + } + +#ifdef DEBUG_NCQ + if (tag > 0) { + dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s " + "dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command, + ata_get_cmd_descript(qc->dma_dir), + ata_get_cmd_descript(qc->tf.protocol), + in_le32(&(hsdev->sata_dwc_regs->dmacr))); + } +#endif + + if (ata_is_dma(qc->tf.protocol)) { + if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) { + dev_err(ap->dev, "%s DMA protocol RX and TX DMA not " + "pending dmacr: 0x%08x\n", __func__, + in_le32(&(hsdev->sata_dwc_regs->dmacr))); + } + + hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; + sata_dwc_qc_complete(ap, qc, check_status); + ap->link.active_tag = ATA_TAG_POISON; + } else { + sata_dwc_qc_complete(ap, qc, check_status); + } +} + +static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc, + u32 check_status) +{ + u8 status = 0; + u32 mask = 0x0; + u8 tag = qc->tag; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + host_pvt.sata_dwc_sactive_queued = 0; + dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status); + + if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) + dev_err(ap->dev, "TX DMA PENDING\n"); + else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) + dev_err(ap->dev, "RX DMA PENDING\n"); + dev_dbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u:" + " protocol=%d\n", qc->tf.command, status, ap->print_id, + qc->tf.protocol); + + /* clear active bit */ + mask = (~(qcmd_tag_to_mask(tag))); + host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \ + & mask; + host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \ + & mask; + ata_qc_complete(qc); + return 0; +} + +static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev) +{ + /* Enable selective interrupts by setting the interrupt maskregister*/ + out_le32(&hsdev->sata_dwc_regs->intmr, + SATA_DWC_INTMR_ERRM | + SATA_DWC_INTMR_NEWFPM | + SATA_DWC_INTMR_PMABRTM | + SATA_DWC_INTMR_DMATM); + /* + * Unmask the error bits that should trigger an error interrupt by + * setting the error mask register. + */ + out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS); + + dev_dbg(host_pvt.dwc_dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n", + __func__, in_le32(&hsdev->sata_dwc_regs->intmr), + in_le32(&hsdev->sata_dwc_regs->errmr)); +} + +static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = (void *)base + 0x00; + port->data_addr = (void *)base + 0x00; + + port->error_addr = (void *)base + 0x04; + port->feature_addr = (void *)base + 0x04; + + port->nsect_addr = (void *)base + 0x08; + + port->lbal_addr = (void *)base + 0x0c; + port->lbam_addr = (void *)base + 0x10; + port->lbah_addr = (void *)base + 0x14; + + port->device_addr = (void *)base + 0x18; + port->command_addr = (void *)base + 0x1c; + port->status_addr = (void *)base + 0x1c; + + port->altstatus_addr = (void *)base + 0x20; + port->ctl_addr = (void *)base + 0x20; +} + +/* + * Function : sata_dwc_port_start + * arguments : struct ata_ioports *port + * Return value : returns 0 if success, error code otherwise + * This function allocates the scatter gather LLI table for AHB DMA + */ +static int sata_dwc_port_start(struct ata_port *ap) +{ + int err = 0; + struct sata_dwc_device *hsdev; + struct sata_dwc_device_port *hsdevp = NULL; + struct device *pdev; + int i; + + hsdev = HSDEV_FROM_AP(ap); + + dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no); + + hsdev->host = ap->host; + pdev = ap->host->dev; + if (!pdev) { + dev_err(ap->dev, "%s: no ap->host->dev\n", __func__); + err = -ENODEV; + goto CLEANUP; + } + + /* Allocate Port Struct */ + hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL); + if (!hsdevp) { + dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__); + err = -ENOMEM; + goto CLEANUP; + } + hsdevp->hsdev = hsdev; + + for (i = 0; i < SATA_DWC_QCMD_MAX; i++) + hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT; + + ap->bmdma_prd = 0; /* set these so libata doesn't use them */ + ap->bmdma_prd_dma = 0; + + /* + * DMA - Assign scatter gather LLI table. We can't use the libata + * version since it's PRD is IDE PCI specific. + */ + for (i = 0; i < SATA_DWC_QCMD_MAX; i++) { + hsdevp->llit[i] = dma_alloc_coherent(pdev, + SATA_DWC_DMAC_LLI_TBL_SZ, + &(hsdevp->llit_dma[i]), + GFP_ATOMIC); + if (!hsdevp->llit[i]) { + dev_err(ap->dev, "%s: dma_alloc_coherent failed\n", + __func__); + err = -ENOMEM; + goto CLEANUP; + } + } + + if (ap->port_no == 0) { + dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n", + __func__); + out_le32(&hsdev->sata_dwc_regs->dmacr, + SATA_DWC_DMACR_TXRXCH_CLEAR); + + dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n", + __func__); + out_le32(&hsdev->sata_dwc_regs->dbtsr, + (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) | + SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT))); + } + + /* Clear any error bits before libata starts issuing commands */ + clear_serror(); + ap->private_data = hsdevp; + +CLEANUP: + if (err) { + sata_dwc_port_stop(ap); + dev_dbg(ap->dev, "%s: fail\n", __func__); + } else { + dev_dbg(ap->dev, "%s: done\n", __func__); + } + + return err; +} + +static void sata_dwc_port_stop(struct ata_port *ap) +{ + int i; + struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + + dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id); + + if (hsdevp && hsdev) { + /* deallocate LLI table */ + for (i = 0; i < SATA_DWC_QCMD_MAX; i++) { + dma_free_coherent(ap->host->dev, + SATA_DWC_DMAC_LLI_TBL_SZ, + hsdevp->llit[i], hsdevp->llit_dma[i]); + } + + kfree(hsdevp); + } + ap->private_data = NULL; +} + +/* + * Function : sata_dwc_exec_command_by_tag + * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued + * Return value : None + * This function keeps track of individual command tag ids and calls + * ata_exec_command in libata + */ +static void sata_dwc_exec_command_by_tag(struct ata_port *ap, + struct ata_taskfile *tf, + u8 tag, u32 cmd_issued) +{ + unsigned long flags; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + + dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command, + ata_get_cmd_descript(tf), tag); + + spin_lock_irqsave(&ap->host->lock, flags); + hsdevp->cmd_issued[tag] = cmd_issued; + spin_unlock_irqrestore(&ap->host->lock, flags); + /* + * Clear SError before executing a new command. + * sata_dwc_scr_write and read can not be used here. Clearing the PM + * managed SError register for the disk needs to be done before the + * task file is loaded. + */ + clear_serror(); + ata_sff_exec_command(ap, tf); +} + +static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag) +{ + sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag, + SATA_DWC_CMD_ISSUED_PEND); +} + +static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc) +{ + u8 tag = qc->tag; + + if (ata_is_ncq(qc->tf.protocol)) { + dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n", + __func__, qc->ap->link.sactive, tag); + } else { + tag = 0; + } + sata_dwc_bmdma_setup_by_tag(qc, tag); +} + +static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag) +{ + int start_dma; + u32 reg, dma_chan; + struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc); + struct ata_port *ap = qc->ap; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + int dir = qc->dma_dir; + dma_chan = hsdevp->dma_chan[tag]; + + if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) { + start_dma = 1; + if (dir == DMA_TO_DEVICE) + hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX; + else + hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX; + } else { + dev_err(ap->dev, "%s: Command not pending cmd_issued=%d " + "(tag=%d) DMA NOT started\n", __func__, + hsdevp->cmd_issued[tag], tag); + start_dma = 0; + } + + dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s " + "start_dma? %x\n", __func__, qc, tag, qc->tf.command, + ata_get_cmd_descript(qc->dma_dir), start_dma); + sata_dwc_tf_dump(&(qc->tf)); + + if (start_dma) { + reg = core_scr_read(SCR_ERROR); + if (reg & SATA_DWC_SERROR_ERR_BITS) { + dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n", + __func__, reg); + } + + if (dir == DMA_TO_DEVICE) + out_le32(&hsdev->sata_dwc_regs->dmacr, + SATA_DWC_DMACR_TXCHEN); + else + out_le32(&hsdev->sata_dwc_regs->dmacr, + SATA_DWC_DMACR_RXCHEN); + + /* Enable AHB DMA transfer on the specified channel */ + dma_dwc_xfer_start(dma_chan); + } +} + +static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc) +{ + u8 tag = qc->tag; + + if (ata_is_ncq(qc->tf.protocol)) { + dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n", + __func__, qc->ap->link.sactive, tag); + } else { + tag = 0; + } + dev_dbg(qc->ap->dev, "%s\n", __func__); + sata_dwc_bmdma_start_by_tag(qc, tag); +} + +/* + * Function : sata_dwc_qc_prep_by_tag + * arguments : ata_queued_cmd *qc, u8 tag + * Return value : None + * qc_prep for a particular queued command based on tag + */ +static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag) +{ + struct scatterlist *sg = qc->sg; + struct ata_port *ap = qc->ap; + u32 dma_chan; + struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + int err; + + dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n", + __func__, ap->port_no, ata_get_cmd_descript(qc->dma_dir), + qc->n_elem); + + dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag], + hsdevp->llit_dma[tag], + (void *__iomem)(&hsdev->sata_dwc_regs->\ + dmadr), qc->dma_dir); + if (dma_chan < 0) { + dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n", + __func__, err); + return; + } + hsdevp->dma_chan[tag] = dma_chan; +} + +static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc) +{ + u32 sactive; + u8 tag = qc->tag; + struct ata_port *ap = qc->ap; + +#ifdef DEBUG_NCQ + if (qc->tag > 0 || ap->link.sactive > 1) + dev_info(ap->dev, "%s ap id=%d cmd(0x%02x)=%s qc tag=%d " + "prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n", + __func__, ap->print_id, qc->tf.command, + ata_get_cmd_descript(&qc->tf), + qc->tag, ata_get_cmd_descript(qc->tf.protocol), + ap->link.active_tag, ap->link.sactive); +#endif + + if (!ata_is_ncq(qc->tf.protocol)) + tag = 0; + sata_dwc_qc_prep_by_tag(qc, tag); + + if (ata_is_ncq(qc->tf.protocol)) { + sactive = core_scr_read(SCR_ACTIVE); + sactive |= (0x00000001 << tag); + core_scr_write(SCR_ACTIVE, sactive); + + dev_dbg(qc->ap->dev, "%s: tag=%d ap->link.sactive = 0x%08x " + "sactive=0x%08x\n", __func__, tag, qc->ap->link.sactive, + sactive); + + ap->ops->sff_tf_load(ap, &qc->tf); + sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag, + SATA_DWC_CMD_ISSUED_PEND); + } else { + ata_sff_qc_issue(qc); + } + return 0; +} + +/* + * Function : sata_dwc_qc_prep + * arguments : ata_queued_cmd *qc + * Return value : None + * qc_prep for a particular queued command + */ + +static void sata_dwc_qc_prep(struct ata_queued_cmd *qc) +{ + if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO)) + return; + +#ifdef DEBUG_NCQ + if (qc->tag > 0) + dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n", + __func__, tag, qc->ap->link.active_tag); + + return ; +#endif +} + +static void sata_dwc_error_handler(struct ata_port *ap) +{ + ap->link.flags |= ATA_LFLAG_NO_HRST; + ata_sff_error_handler(ap); +} + +/* + * scsi mid-layer and libata interface structures + */ +static struct scsi_host_template sata_dwc_sht = { + ATA_NCQ_SHT(DRV_NAME), + /* + * test-only: Currently this driver doesn't handle NCQ + * correctly. We enable NCQ but set the queue depth to a + * max of 1. This will get fixed in in a future release. + */ + .sg_tablesize = LIBATA_MAX_PRD, + .can_queue = ATA_DEF_QUEUE, /* ATA_MAX_QUEUE */ + .dma_boundary = ATA_DMA_BOUNDARY, +}; + +static struct ata_port_operations sata_dwc_ops = { + .inherits = &ata_sff_port_ops, + + .error_handler = sata_dwc_error_handler, + + .qc_prep = sata_dwc_qc_prep, + .qc_issue = sata_dwc_qc_issue, + + .scr_read = sata_dwc_scr_read, + .scr_write = sata_dwc_scr_write, + + .port_start = sata_dwc_port_start, + .port_stop = sata_dwc_port_stop, + + .bmdma_setup = sata_dwc_bmdma_setup, + .bmdma_start = sata_dwc_bmdma_start, +}; + +static const struct ata_port_info sata_dwc_port_info[] = { + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_NCQ, + .pio_mask = 0x1f, /* pio 0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &sata_dwc_ops, + }, +}; + +static int sata_dwc_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct sata_dwc_device *hsdev; + u32 idr, versionr; + char *ver = (char *)&versionr; + u8 *base = NULL; + int err = 0; + int irq, rc; + struct ata_host *host; + struct ata_port_info pi = sata_dwc_port_info[0]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + + /* Allocate DWC SATA device */ + hsdev = kmalloc(sizeof(*hsdev), GFP_KERNEL); + if (hsdev == NULL) { + dev_err(&ofdev->dev, "kmalloc failed for hsdev\n"); + err = -ENOMEM; + goto error_out; + } + memset(hsdev, 0, sizeof(*hsdev)); + + /* Ioremap SATA registers */ + base = of_iomap(ofdev->dev.of_node, 0); + if (!base) { + dev_err(&ofdev->dev, "ioremap failed for SATA register" + " address\n"); + err = -ENODEV; + goto error_out; + } + hsdev->reg_base = base; + dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n"); + + /* Synopsys DWC SATA specific Registers */ + hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET); + + /* Allocate and fill host */ + host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS); + if (!host) { + dev_err(&ofdev->dev, "ata_host_alloc_pinfo failed\n"); + err = -ENOMEM; + goto error_out; + } + + host->private_data = hsdev; + + /* Setup port */ + host->ports[0]->ioaddr.cmd_addr = base; + host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET; + host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET; + sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base); + + /* Read the ID and Version Registers */ + idr = in_le32(&hsdev->sata_dwc_regs->idr); + versionr = in_le32(&hsdev->sata_dwc_regs->versionr); + dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n", + idr, ver[0], ver[1], ver[2]); + + /* Get SATA DMA interrupt number */ + irq = irq_of_parse_and_map(ofdev->dev.of_node, 1); + if (irq == NO_IRQ) { + dev_err(&ofdev->dev, "no SATA DMA irq\n"); + err = -ENODEV; + goto error_out; + } + + /* Get physical SATA DMA register base address */ + host_pvt.sata_dma_regs = of_iomap(ofdev->dev.of_node, 1); + if (!(host_pvt.sata_dma_regs)) { + dev_err(&ofdev->dev, "ioremap failed for AHBDMA register" + " address\n"); + err = -ENODEV; + goto error_out; + } + + /* Save dev for later use in dev_xxx() routines */ + host_pvt.dwc_dev = &ofdev->dev; + + /* Initialize AHB DMAC */ + dma_dwc_init(hsdev, irq); + + /* Enable SATA Interrupts */ + sata_dwc_enable_interrupts(hsdev); + + /* Get SATA interrupt number */ + irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); + if (irq == NO_IRQ) { + dev_err(&ofdev->dev, "no SATA DMA irq\n"); + err = -ENODEV; + goto error_out; + } + + /* + * Now, register with libATA core, this will also initiate the + * device discovery process, invoking our port_start() handler & + * error_handler() to execute a dummy Softreset EH session + */ + rc = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht); + + if (rc != 0) + dev_err(&ofdev->dev, "failed to activate host"); + + dev_set_drvdata(&ofdev->dev, host); + return 0; + +error_out: + /* Free SATA DMA resources */ + dma_dwc_exit(hsdev); + + if (base) + iounmap(base); + return err; +} + +static int sata_dwc_remove(struct of_device *ofdev) +{ + struct device *dev = &ofdev->dev; + struct ata_host *host = dev_get_drvdata(dev); + struct sata_dwc_device *hsdev = host->private_data; + + ata_host_detach(host); + dev_set_drvdata(dev, NULL); + + /* Free SATA DMA resources */ + dma_dwc_exit(hsdev); + + iounmap(hsdev->reg_base); + kfree(hsdev); + kfree(host); + dev_dbg(&ofdev->dev, "done\n"); + return 0; +} + +static const struct of_device_id sata_dwc_match[] = { + { .compatible = "amcc,sata-460ex", }, + {} +}; +MODULE_DEVICE_TABLE(of, sata_dwc_match); + +static struct of_platform_driver sata_dwc_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = sata_dwc_match, + }, + .probe = sata_dwc_probe, + .remove = sata_dwc_remove, +}; + +static int __init sata_dwc_init(void) +{ + return of_register_platform_driver(&sata_dwc_driver); +} + +static void __exit sata_dwc_exit(void) +{ + of_unregister_platform_driver(&sata_dwc_driver); +} + +module_init(sata_dwc_init); +module_exit(sata_dwc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>"); +MODULE_DESCRIPTION("DesignWare Cores SATA controller low lever driver"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 61c89b5..18c986d 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1096,7 +1096,7 @@ static void sata_fsl_host_intr(struct ata_port *ap) { struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; - u32 hstatus, qc_active = 0; + u32 hstatus, done_mask = 0; struct ata_queued_cmd *qc; u32 SError; @@ -1116,28 +1116,28 @@ static void sata_fsl_host_intr(struct ata_port *ap) } /* Read command completed register */ - qc_active = ioread32(hcr_base + CC); + done_mask = ioread32(hcr_base + CC); VPRINTK("Status of all queues :\n"); - VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", - qc_active, + VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", + done_mask, ioread32(hcr_base + CA), ioread32(hcr_base + CE), ioread32(hcr_base + CQ), ap->qc_active); - if (qc_active & ap->qc_active) { + if (done_mask & ap->qc_active) { int i; /* clear CC bit, this will also complete the interrupt */ - iowrite32(qc_active, hcr_base + CC); + iowrite32(done_mask, hcr_base + CC); DPRINTK("Status of all queues :\n"); - DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n", - qc_active, ioread32(hcr_base + CA), + DPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x\n", + done_mask, ioread32(hcr_base + CA), ioread32(hcr_base + CE)); for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { - if (qc_active & (1 << i)) { + if (done_mask & (1 << i)) { qc = ata_qc_from_tag(ap, i); if (qc) { ata_qc_complete(qc); @@ -1164,7 +1164,7 @@ static void sata_fsl_host_intr(struct ata_port *ap) /* Spurious Interrupt!! */ DPRINTK("spurious interrupt!!, CC = 0x%x\n", ioread32(hcr_base + CC)); - iowrite32(qc_active, hcr_base + CC); + iowrite32(done_mask, hcr_base + CC); return; } } diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a476cd9..9463c71 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2716,34 +2716,35 @@ static void mv_err_intr(struct ata_port *ap) static void mv_process_crpb_response(struct ata_port *ap, struct mv_crpb *response, unsigned int tag, int ncq_enabled) { + u8 ata_status; + u16 edma_status = le16_to_cpu(response->flags); struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); - if (qc) { - u8 ata_status; - u16 edma_status = le16_to_cpu(response->flags); - /* - * edma_status from a response queue entry: - * LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only). - * MSB is saved ATA status from command completion. - */ - if (!ncq_enabled) { - u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV; - if (err_cause) { - /* - * Error will be seen/handled by mv_err_intr(). - * So do nothing at all here. - */ - return; - } - } - ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT; - if (!ac_err_mask(ata_status)) - ata_qc_complete(qc); - /* else: leave it for mv_err_intr() */ - } else { + if (unlikely(!qc)) { ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n", __func__, tag); + return; + } + + /* + * edma_status from a response queue entry: + * LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only). + * MSB is saved ATA status from command completion. + */ + if (!ncq_enabled) { + u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV; + if (err_cause) { + /* + * Error will be seen/handled by + * mv_err_intr(). So do nothing at all here. + */ + return; + } } + ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT; + if (!ac_err_mask(ata_status)) + ata_qc_complete(qc); + /* else: leave it for mv_err_intr() */ } static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 2116113..cb89ef8 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -1018,7 +1018,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) NV_ADMA_STAT_CPBERR | NV_ADMA_STAT_CMD_COMPLETE)) { u32 check_commands = notifier_clears[i]; - int pos, error = 0; + int pos, rc; if (status & NV_ADMA_STAT_CPBERR) { /* check all active commands */ @@ -1030,10 +1030,12 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) } /* check CPBs for completed commands */ - while ((pos = ffs(check_commands)) && !error) { + while ((pos = ffs(check_commands))) { pos--; - error = nv_adma_check_cpb(ap, pos, + rc = nv_adma_check_cpb(ap, pos, notifier_error & (1 << pos)); + if (unlikely(rc)) + check_commands = 0; check_commands &= ~(1 << pos); } } @@ -2129,7 +2131,6 @@ static int nv_swncq_sdbfis(struct ata_port *ap) struct nv_swncq_port_priv *pp = ap->private_data; struct ata_eh_info *ehi = &ap->link.eh_info; u32 sactive; - int nr_done = 0; u32 done_mask; int i; u8 host_stat; @@ -2170,22 +2171,21 @@ static int nv_swncq_sdbfis(struct ata_port *ap) pp->dhfis_bits &= ~(1 << i); pp->dmafis_bits &= ~(1 << i); pp->sdbfis_bits |= (1 << i); - nr_done++; } } if (!ap->qc_active) { DPRINTK("over\n"); nv_swncq_pp_reinit(ap); - return nr_done; + return 0; } if (pp->qc_active & pp->dhfis_bits) - return nr_done; + return 0; if ((pp->ncq_flags & ncq_saw_backout) || (pp->qc_active ^ pp->dhfis_bits)) - /* if the controller cann't get a device to host register FIS, + /* if the controller can't get a device to host register FIS, * The driver needs to reissue the new command. */ lack_dhfis = 1; @@ -2202,7 +2202,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap) if (lack_dhfis) { qc = ata_qc_from_tag(ap, pp->last_issue_tag); nv_swncq_issue_atacmd(ap, qc); - return nr_done; + return 0; } if (pp->defer_queue.defer_bits) { @@ -2212,7 +2212,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap) nv_swncq_issue_atacmd(ap, qc); } - return nr_done; + return 0; } static inline u32 nv_swncq_tag(struct ata_port *ap) @@ -2224,7 +2224,7 @@ static inline u32 nv_swncq_tag(struct ata_port *ap) return (tag & 0x1f); } -static int nv_swncq_dmafis(struct ata_port *ap) +static void nv_swncq_dmafis(struct ata_port *ap) { struct ata_queued_cmd *qc; unsigned int rw; @@ -2239,7 +2239,7 @@ static int nv_swncq_dmafis(struct ata_port *ap) qc = ata_qc_from_tag(ap, tag); if (unlikely(!qc)) - return 0; + return; rw = qc->tf.flags & ATA_TFLAG_WRITE; @@ -2254,8 +2254,6 @@ static int nv_swncq_dmafis(struct ata_port *ap) dmactl |= ATA_DMA_WR; iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - return 1; } static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis) @@ -2265,7 +2263,6 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis) struct ata_eh_info *ehi = &ap->link.eh_info; u32 serror; u8 ata_stat; - int rc = 0; ata_stat = ap->ops->sff_check_status(ap); nv_swncq_irq_clear(ap, fis); @@ -2310,8 +2307,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis) "dhfis 0x%X dmafis 0x%X sactive 0x%X\n", ap->print_id, pp->qc_active, pp->dhfis_bits, pp->dmafis_bits, readl(pp->sactive_block)); - rc = nv_swncq_sdbfis(ap); - if (rc < 0) + if (nv_swncq_sdbfis(ap) < 0) goto irq_error; } @@ -2348,7 +2344,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis) */ pp->dmafis_bits |= (0x1 << nv_swncq_tag(ap)); pp->ncq_flags |= ncq_saw_dmas; - rc = nv_swncq_dmafis(ap); + nv_swncq_dmafis(ap); } irq_exit: diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 477345d..a0c20d9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1459,6 +1459,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev) switch (pdev->device) { case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ + case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ /* The controller should be in single function ahci mode */ conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ break; @@ -1470,6 +1471,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev) /* Fall through */ case PCI_DEVICE_ID_JMICRON_JMB361: case PCI_DEVICE_ID_JMICRON_JMB363: + case PCI_DEVICE_ID_JMICRON_JMB369: /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ /* Set the class codes correctly and then direct IDE 0 */ conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ @@ -1496,16 +1498,20 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, qui DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); #endif |