diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/auxdisplay/Kconfig | 109 | ||||
| -rw-r--r-- | drivers/auxdisplay/Makefile | 6 | ||||
| -rw-r--r-- | drivers/auxdisplay/cfag12864b.c | 383 | ||||
| -rw-r--r-- | drivers/auxdisplay/cfag12864bfb.c | 180 | ||||
| -rw-r--r-- | drivers/auxdisplay/ks0108.c | 166 |
7 files changed, 847 insertions, 0 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index e7da9fa..050323f 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -80,6 +80,8 @@ source "drivers/rtc/Kconfig" source "drivers/dma/Kconfig" +source "drivers/auxdisplay/Kconfig" + source "drivers/kvm/Kconfig" endmenu diff --git a/drivers/Makefile b/drivers/Makefile index f28dcb4..3a718f5 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_FUSION) += message/ obj-$(CONFIG_IEEE1394) += ieee1394/ obj-y += cdrom/ +obj-y += auxdisplay/ obj-$(CONFIG_MTD) += mtd/ obj-$(CONFIG_SPI) += spi/ obj-$(CONFIG_PCCARD) += pcmcia/ diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig new file mode 100644 index 0000000..0300e7f5 --- /dev/null +++ b/drivers/auxdisplay/Kconfig @@ -0,0 +1,109 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# +# Auxiliary display drivers configuration. +# + +menu "Auxiliary Display support" + +config KS0108 + tristate "KS0108 LCD Controller" + depends on PARPORT_PC + default n + ---help--- + If you have a LCD controlled by one or more KS0108 + controllers, say Y. You will need also another more specific + driver for your LCD. + + Depends on Parallel Port support. If you say Y at + parport, you will be able to compile this as a module (M) + and built-in as well (Y). + + To compile this as a module, choose M here: + the module will be called ks0108. + + If unsure, say N. + +config KS0108_PORT + hex "Parallel port where the LCD is connected" + depends on KS0108 + default 0x378 + ---help--- + The address of the parallel port where the LCD is connected. + + The first standard parallel port address is 0x378. + The second standard parallel port address is 0x278. + The third standard parallel port address is 0x3BC. + + You can specify a different address if you need. + + If you don't know what I'm talking about, load the parport module, + and execute "dmesg" or "cat /proc/ioports". You can see there how + many parallel ports are present and which address each one has. + + Usually you only need to use 0x378. + + If you compile this as a module, you can still override this + using the module parameters. + +config KS0108_DELAY + int "Delay between each control writing (microseconds)" + depends on KS0108 + default "2" + ---help--- + Amount of time the ks0108 should wait between each control write + to the parallel port. + + If your driver seems to miss random writings, increment this. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. + +config CFAG12864B + tristate "CFAG12864B LCD" + depends on X86 + depends on FB + depends on KS0108 + default n + ---help--- + If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series, + say Y. You also need the ks0108 LCD Controller driver. + + For help about how to wire your LCD to the parallel port, + check Documentation/auxdisplay/cfag12864b + + Depends on the x86 arch and the framebuffer support. + + The LCD framebuffer driver can be attached to a console. + It will work fine. However, you can't attach it to the fbdev driver + of the xorg server. + + To compile this as a module, choose M here: + the modules will be called cfag12864b and cfag12864bfb. + + If unsure, say N. + +config CFAG12864B_RATE + int "Refresh rate (hertz)" + depends on CFAG12864B + default "20" + ---help--- + Refresh rate of the LCD. + + As the LCD is not memory mapped, the driver has to make the work by + software. This means you should be careful setting this value higher. + If your CPUs are really slow or you feel the system is slowed down, + decrease the value. + + Be careful modifying this value to a very high value: + You can freeze the computer, or the LCD maybe can't draw as fast as you + are requesting. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. +endmenu diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile new file mode 100644 index 0000000..8a8936a --- /dev/null +++ b/drivers/auxdisplay/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the kernel auxiliary displays device drivers. +# + +obj-$(CONFIG_KS0108) += ks0108.o +obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c new file mode 100644 index 0000000..889583d --- /dev/null +++ b/drivers/auxdisplay/cfag12864b.c @@ -0,0 +1,383 @@ +/* + * Filename: cfag12864b.c + * Version: 0.1.0 + * Description: cfag12864b LCD driver + * License: GPLv2 + * Depends: ks0108 + * + * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com> + * Date: 2006-10-31 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/cdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/vmalloc.h> +#include <linux/workqueue.h> +#include <linux/ks0108.h> +#include <linux/cfag12864b.h> + + +#define CFAG12864B_NAME "cfag12864b" + +/* + * Module Parameters + */ + +static unsigned int cfag12864b_rate = CONFIG_CFAG12864B_RATE; +module_param(cfag12864b_rate, uint, S_IRUGO); +MODULE_PARM_DESC(cfag12864b_rate, + "Refresh rate (hertzs)"); + +unsigned int cfag12864b_getrate(void) +{ + return cfag12864b_rate; +} + +/* + * cfag12864b Commands + * + * E = Enable signal + * Everytime E switch from low to high, + * cfag12864b/ks0108 reads the command/data. + * + * CS1 = First ks0108controller. + * If high, the first ks0108 controller receives commands/data. + * + * CS2 = Second ks0108 controller + * If high, the second ks0108 controller receives commands/data. + * + * DI = Data/Instruction + * If low, cfag12864b will expect commands. + * If high, cfag12864b will expect data. + * + */ + +#define bit(n) (((unsigned char)1)<<(n)) + +#define CFAG12864B_BIT_E (0) +#define CFAG12864B_BIT_CS1 (2) +#define CFAG12864B_BIT_CS2 (1) +#define CFAG12864B_BIT_DI (3) + +static unsigned char cfag12864b_state; + +static void cfag12864b_set(void) +{ + ks0108_writecontrol(cfag12864b_state); +} + +static void cfag12864b_setbit(unsigned char state, unsigned char n) +{ + if (state) + cfag12864b_state |= bit(n); + else + cfag12864b_state &= ~bit(n); +} + +static void cfag12864b_e(unsigned char state) +{ + cfag12864b_setbit(state, CFAG12864B_BIT_E); + cfag12864b_set(); +} + +static void cfag12864b_cs1(unsigned char state) +{ + cfag12864b_setbit(state, CFAG12864B_BIT_CS1); +} + +static void cfag12864b_cs2(unsigned char state) +{ + cfag12864b_setbit(state, CFAG12864B_BIT_CS2); +} + +static void cfag12864b_di(unsigned char state) +{ + cfag12864b_setbit(state, CFAG12864B_BIT_DI); +} + +static void cfag12864b_setcontrollers(unsigned char first, + unsigned char second) +{ + if (first) + cfag12864b_cs1(0); + else + cfag12864b_cs1(1); + + if (second) + cfag12864b_cs2(0); + else + cfag12864b_cs2(1); +} + +static void cfag12864b_controller(unsigned char which) +{ + if (which == 0) + cfag12864b_setcontrollers(1, 0); + else if (which == 1) + cfag12864b_setcontrollers(0, 1); +} + +static void cfag12864b_displaystate(unsigned char state) +{ + cfag12864b_di(0); + cfag12864b_e(1); + ks0108_displaystate(state); + cfag12864b_e(0); +} + +static void cfag12864b_address(unsigned char address) +{ + cfag12864b_di(0); + cfag12864b_e(1); + ks0108_address(address); + cfag12864b_e(0); +} + +static void cfag12864b_page(unsigned char page) +{ + cfag12864b_di(0); + cfag12864b_e(1); + ks0108_page(page); + cfag12864b_e(0); +} + +static void cfag12864b_startline(unsigned char startline) +{ + cfag12864b_di(0); + cfag12864b_e(1); + ks0108_startline(startline); + cfag12864b_e(0); +} + +static void cfag12864b_writebyte(unsigned char byte) +{ + cfag12864b_di(1); + cfag12864b_e(1); + ks0108_writedata(byte); + cfag12864b_e(0); +} + +static void cfag12864b_nop(void) +{ + cfag12864b_startline(0); +} + +/* + * cfag12864b Internal Commands + */ + +static void cfag12864b_on(void) +{ + cfag12864b_setcontrollers(1, 1); + cfag12864b_displaystate(1); +} + +static void cfag12864b_off(void) +{ + cfag12864b_setcontrollers(1, 1); + cfag12864b_displaystate(0); +} + +static void cfag12864b_clear(void) +{ + unsigned char i, j; + + cfag12864b_setcontrollers(1, 1); + for (i = 0; i < CFAG12864B_PAGES; i++) { + cfag12864b_page(i); + cfag12864b_address(0); + for (j = 0; j < CFAG12864B_ADDRESSES; j++) + cfag12864b_writebyte(0); + } +} + +/* + * Update work + */ + +unsigned char *cfag12864b_buffer; +static unsigned char *cfag12864b_cache; +static DEFINE_MUTEX(cfag12864b_mutex); +static unsigned char cfag12864b_updating; +static void cfag12864b_update(struct work_struct *delayed_work); +static struct workqueue_struct *cfag12864b_workqueue; +static DECLARE_DELAYED_WORK(cfag12864b_work, cfag12864b_update); + +static void cfag12864b_queue(void) +{ + queue_delayed_work(cfag12864b_workqueue, &cfag12864b_work, + HZ / cfag12864b_rate); +} + +unsigned char cfag12864b_enable(void) +{ + unsigned char ret; + + mutex_lock(&cfag12864b_mutex); + + if (!cfag12864b_updating) { + cfag12864b_updating = 1; + cfag12864b_queue(); + ret = 0; + } else + ret = 1; + + mutex_unlock(&cfag12864b_mutex); + + return ret; +} + +void cfag12864b_disable(void) +{ + mutex_lock(&cfag12864b_mutex); + + if (cfag12864b_updating) { + cfag12864b_updating = 0; + cancel_delayed_work(&cfag12864b_work); + flush_workqueue(cfag12864b_workqueue); + } + + mutex_unlock(&cfag12864b_mutex); +} + +unsigned char cfag12864b_isenabled(void) +{ + return cfag12864b_updating; +} + +static void cfag12864b_update(struct work_struct *work) +{ + unsigned char c; + unsigned short i, j, k, b; + + if (memcmp(cfag12864b_cache, cfag12864b_buffer, CFAG12864B_SIZE)) { + for (i = 0; i < CFAG12864B_CONTROLLERS; i++) { + cfag12864b_controller(i); + cfag12864b_nop(); + for (j = 0; j < CFAG12864B_PAGES; j++) { + cfag12864b_page(j); + cfag12864b_nop(); + cfag12864b_address(0); + cfag12864b_nop(); + for (k = 0; k < CFAG12864B_ADDRESSES; k++) { + for (c = 0, b = 0; b < 8; b++) + if (cfag12864b_buffer + [i * CFAG12864B_ADDRESSES / 8 + + k / 8 + (j * 8 + b) * + CFAG12864B_WIDTH / 8] + & bit(k % 8)) + c |= bit(b); + cfag12864b_writebyte(c); + } + } + } + + memcpy(cfag12864b_cache, cfag12864b_buffer, CFAG12864B_SIZE); + } + + if (cfag12864b_updating) + cfag12864b_queue(); +} + +/* + * cfag12864b Exported Symbols + */ + +EXPORT_SYMBOL_GPL(cfag12864b_buffer); +EXPORT_SYMBOL_GPL(cfag12864b_getrate); +EXPORT_SYMBOL_GPL(cfag12864b_enable); +EXPORT_SYMBOL_GPL(cfag12864b_disable); +EXPORT_SYMBOL_GPL(cfag12864b_isenabled); + +/* + * Module Init & Exit + */ + +static int __init cfag12864b_init(void) +{ + int ret = -EINVAL; + + if (PAGE_SIZE < CFAG12864B_SIZE) { + printk(KERN_ERR CFAG12864B_NAME ": ERROR: " + "page size (%i) < cfag12864b size (%i)\n", + (unsigned int)PAGE_SIZE, CFAG12864B_SIZE); + ret = -ENOMEM; + goto none; + } + + cfag12864b_buffer = (unsigned char *) __get_free_page(GFP_KERNEL); + if (cfag12864b_buffer == NULL) { + printk(KERN_ERR CFAG12864B_NAME ": ERROR: " + "can't get a free page\n"); + ret = -ENOMEM; + goto none; + } + + cfag12864b_cache = kmalloc(sizeof(unsigned char) * + CFAG12864B_SIZE, GFP_KERNEL); + if (cfag12864b_buffer == NULL) { + printk(KERN_ERR CFAG12864B_NAME ": ERROR: " + "can't alloc cache buffer (%i bytes)\n", + CFAG12864B_SIZE); + ret = -ENOMEM; + goto bufferalloced; + } + + cfag12864b_workqueue = create_singlethread_workqueue(CFAG12864B_NAME); + if (cfag12864b_workqueue == NULL) + goto cachealloced; + + memset(cfag12864b_buffer, 0, CFAG12864B_SIZE); + + cfag12864b_clear(); + cfag12864b_on(); + + return 0; + +cachealloced: + kfree(cfag12864b_cache); + +bufferalloced: + free_page((unsigned long) cfag12864b_buffer); + +none: + return ret; +} + +static void __exit cfag12864b_exit(void) +{ + cfag12864b_disable(); + cfag12864b_off(); + destroy_workqueue(cfag12864b_workqueue); + kfree(cfag12864b_cache); + free_page((unsigned long) cfag12864b_buffer); +} + +module_init(cfag12864b_init); +module_exit(cfag12864b_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>"); +MODULE_DESCRIPTION("cfag12864b LCD driver"); diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c new file mode 100644 index 0000000..94765e7 --- /dev/null +++ b/drivers/auxdisplay/cfag12864bfb.c @@ -0,0 +1,180 @@ +/* + * Filename: cfag12864bfb.c + * Version: 0.1.0 + * Description: cfag12864b LCD framebuffer driver + * License: GPLv2 + * Depends: cfag12864b + * + * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com> + * Date: 2006-10-31 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include <linux/mm.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/uaccess.h> +#include <linux/cfag12864b.h> + +#define CFAG12864BFB_NAME "cfag12864bfb" + +static struct fb_fix_screeninfo cfag12864bfb_fix __initdata = { + .id = "cfag12864b", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO10, + .xpanstep = 0, + .ypanstep = 0, + .ywrapstep = 0, + .line_length = CFAG12864B_WIDTH / 8, + .accel = FB_ACCEL_NONE, +}; + +static struct fb_var_screeninfo cfag12864bfb_var __initdata = { + .xres = CFAG12864B_WIDTH, + .yres = CFAG12864B_HEIGHT, + .xres_virtual = CFAG12864B_WIDTH, + .yres_virtual = CFAG12864B_HEIGHT, + .bits_per_pixel = 1, + .red = { 0, 1, 0 }, + .green = { 0, 1, 0 }, + .blue = { 0, 1, 0 }, + .left_margin = 0, + .right_margin = 0, + .upper_margin = 0, + .lower_margin = 0, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static int cfag12864bfb_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + return vm_insert_page(vma, vma->vm_start, + virt_to_page(cfag12864b_buffer)); +} + +static struct fb_ops cfag12864bfb_ops = { + .owner = THIS_MODULE, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_mmap = cfag12864bfb_mmap, +}; + +static int __init cfag12864bfb_probe(struct platform_device *device) +{ + int ret = -EINVAL; + struct fb_info *info = framebuffer_alloc(0, &device->dev); + + if (!info) + goto none; + + info->screen_base = (char __iomem *) cfag12864b_buffer; + info->screen_size = CFAG12864B_SIZE; + info->fbops = &cfag12864bfb_ops; + info->fix = cfag12864bfb_fix; + info->var = cfag12864bfb_var; + info->pseudo_palette = NULL; + info->par = NULL; + info->flags = FBINFO_FLAG_DEFAULT; + + if (register_framebuffer(info) < 0) + goto fballoced; + + platform_set_drvdata(device, info); + + printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + info->fix.id); + + return 0; + +fballoced: + framebuffer_release(info); + +none: + return ret; +} + +static int cfag12864bfb_remove(struct platform_device *device) +{ + struct fb_info *info = platform_get_drvdata(device); + + if (info) { + unregister_framebuffer(info); + framebuffer_release(info); + } + + return 0; +} + +static struct platform_driver cfag12864bfb_driver = { + .probe = cfag12864bfb_probe, + .remove = cfag12864bfb_remove, + .driver = { + .name = CFAG12864BFB_NAME, + }, +}; + +static struct platform_device *cfag12864bfb_device; + +static int __init cfag12864bfb_init(void) +{ + int ret; + + if (cfag12864b_enable()) { + printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: " + "can't enable cfag12864b refreshing (being used)\n"); + return -ENODEV; + } + + ret = platform_driver_register(&cfag12864bfb_driver); + + if (!ret) { + cfag12864bfb_device = + platform_device_alloc(CFAG12864BFB_NAME, 0); + + if (cfag12864bfb_device) + ret = platform_device_add(cfag12864bfb_device); + else + ret = -ENOMEM; + + if (ret) { + platform_device_put(cfag12864bfb_device); + platform_driver_unregister(&cfag12864bfb_driver); + } + } + + return ret; +} + +static void __exit cfag12864bfb_exit(void) +{ + platform_device_unregister(cfag12864bfb_device); + platform_driver_unregister(&cfag12864bfb_driver); + cfag12864b_disable(); +} + +module_init(cfag12864bfb_init); +module_exit(cfag12864bfb_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>"); +MODULE_DESCRIPTION("cfag12864b LCD framebuffer driver"); diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c new file mode 100644 index 0000000..a637575 --- /dev/null +++ b/drivers/auxdisplay/ks0108.c @@ -0,0 +1,166 @@ +/* + * Filename: ks0108.c + * Version: 0.1.0 + * Description: ks0108 LCD Controller driver + * License: GPLv2 + * Depends: parport + * + * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com> + * Date: 2006-10-31 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/io.h> +#include <linux/parport.h> +#include <linux/uaccess.h> +#include <linux/ks0108.h> + +#define KS0108_NAME "ks0108" + +/* + * Module Parameters + */ + +static unsigned int ks0108_port = CONFIG_KS0108_PORT; +module_param(ks0108_port, uint, S_IRUGO); +MODULE_PARM_DESC(ks0108_port, "Parallel port where the LCD is connected"); + +static unsigned int ks0108_delay = CONFIG_KS0108_DELAY; +module_param(ks0108_delay, uint, S_IRUGO); +MODULE_PARM_DESC(ks0108_delay, "Delay between each control writing (microseconds)"); + +/* + * Device + */ + +static struct parport *ks0108_parport; +static struct pardevice *ks0108_pardevice; + +/* + * ks0108 Exported Commands (don't lock) + * + * You _should_ lock in the top driver: This functions _should not_ + * get race conditions in any way. Locking for each byte here would be + * so slow and useless. + * + * There are not bit definitions because they are not flags, + * just arbitrary combinations defined by the documentation for each + * function in the ks0108 LCD controller. If you want to know what means + * a specific combination, look at the function's name. + * + * The ks0108_writecontrol bits need to be reverted ^(0,1,3) because + * the parallel port also revert them using a "not" logic gate. + */ + +#define bit(n) (((unsigned char)1)<<(n)) + +void ks0108_writedata(unsigned char byte) +{ + parport_write_data(ks0108_parport, byte); +} + +void ks0108_writecontrol(unsigned char byte) +{ + udelay(ks0108_delay); + parport_write_control(ks0108_parport, byte ^ (bit(0) | bit(1) | bit(3))); +} + +void ks0108_displaystate(unsigned char state) +{ + ks0108_writedata((state ? bit(0) : 0) | bit(1) | bit(2) | bit(3) | bit(4) | bit(5)); +} + +void ks0108_startline(unsigned char startline) +{ + ks0108_writedata(min(startline,(unsigned char)63) | bit(6) | bit(7)); +} + +void ks0108_address(unsigned char address) +{ + ks0108_writedata(min(address,(unsigned char)63) | bit(6)); +} + +void ks0108_page(unsigned char page) +{ + ks0108_writedata(min(page,(unsigned char)7) | bit(3) | bit(4) | bit(5) | bit(7)); +} + +EXPORT_SYMBOL_GPL(ks0108_writedata); +EXPORT_SYMBOL_GPL(ks0108_writecontrol); +EXPORT_SYMBOL_GPL(ks0108_displaystate); +EXPORT_SYMBOL_GPL(ks0108_startline); +EXPORT_SYMBOL_GPL(ks0108_address); +EXPORT_SYMBOL_GPL(ks0108_page); + +/* + * Module Init & Exit + */ + +static int __init ks0108_init(void) +{ + int result; + int ret = -EINVAL; + + ks0108_parport = parport_find_base(ks0108_port); + if (ks0108_parport == NULL) { + printk(KERN_ERR KS0108_NAME ": ERROR: " + "parport didn't find %i port\n", ks0108_port); + goto none; + } + + ks0108_pardevice = parport_register_device(ks0108_parport, KS0108_NAME, + NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); + if (ks0108_pardevice == NULL) { + printk(KERN_ERR KS0108_NAME ": ERROR: " + "parport didn't register new device\n"); + goto none; + } + + result = parport_claim(ks0108_pardevice); + if (result != 0) { + printk(KERN_ERR KS0108_NAME ": ERROR: " + "can't claim %i parport, maybe in use\n", ks0108_port); + ret = result; + goto registered; + } + + return 0; + +registered: + parport_unregister_device(ks0108_pardevice); + +none: + return ret; +} + +static void __exit ks0108_exit(void) +{ + parport_release(ks0108_pardevice); + parport_unregister_device(ks0108_pardevice); +} + +module_init(ks0108_init); +module_exit(ks0108_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>"); +MODULE_DESCRIPTION("ks0108 LCD Controller driver"); + |