diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpio/gpio-stp-xway.c | 2 | ||||
-rw-r--r-- | drivers/isdn/hisax/Kconfig | 10 | ||||
-rw-r--r-- | drivers/net/ethernet/broadcom/bcm63xx_enet.h | 30 | ||||
-rw-r--r-- | drivers/net/ethernet/octeon/octeon_mgmt.c | 550 | ||||
-rw-r--r-- | drivers/parport/Kconfig | 2 | ||||
-rw-r--r-- | drivers/pinctrl/Kconfig | 16 | ||||
-rw-r--r-- | drivers/pinctrl/Makefile | 3 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-falcon.c | 468 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-lantiq.c | 342 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-lantiq.h | 194 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-xway.c | 781 | ||||
-rw-r--r-- | drivers/spi/Kconfig | 7 | ||||
-rw-r--r-- | drivers/spi/Makefile | 1 | ||||
-rw-r--r-- | drivers/spi/spi-octeon.c | 362 | ||||
-rw-r--r-- | drivers/usb/musb/musb_io.h | 3 |
15 files changed, 2629 insertions, 142 deletions
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c index e35096b..8bead0b 100644 --- a/drivers/gpio/gpio-stp-xway.c +++ b/drivers/gpio/gpio-stp-xway.c @@ -82,7 +82,7 @@ struct xway_stp { struct gpio_chip gc; void __iomem *virt; u32 edge; /* rising or falling edge triggered shift register */ - u16 shadow; /* shadow the shift registers state */ + u32 shadow; /* shadow the shift registers state */ u8 groups; /* we can drive 1-3 groups of 8bit each */ u8 dsl; /* the 2 LSBs can be driven by the dsl core */ u8 phy1; /* 3 bits can be driven by phy1 */ diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index 452fde9..70ecd0c 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -109,7 +109,7 @@ config HISAX_16_3 config HISAX_TELESPCI bool "Teles PCI" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the Teles PCI. See <file:Documentation/isdn/README.HiSax> on how to configure it. @@ -237,7 +237,7 @@ config HISAX_MIC config HISAX_NETJET bool "NETjet card" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the NetJet from Traverse Technologies. @@ -248,7 +248,7 @@ config HISAX_NETJET config HISAX_NETJET_U bool "NETspider U card" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the Netspider U interface ISDN card from Traverse Technologies. @@ -316,7 +316,7 @@ config HISAX_GAZEL config HISAX_HFC_PCI bool "HFC PCI-Bus cards" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the HFC-S PCI 2BDS0 based cards. @@ -341,7 +341,7 @@ config HISAX_HFC_SX config HISAX_ENTERNOW_PCI bool "Formula-n enter:now PCI card" - depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV)) + depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the Formula-n enter:now PCI ISDN card. diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.h b/drivers/net/ethernet/broadcom/bcm63xx_enet.h index 0e3048b..133d585 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h @@ -10,6 +10,7 @@ #include <bcm63xx_regs.h> #include <bcm63xx_irq.h> #include <bcm63xx_io.h> +#include <bcm63xx_iudma.h> /* default number of descriptor */ #define BCMENET_DEF_RX_DESC 64 @@ -31,35 +32,6 @@ #define BCMENET_MAX_MTU 2046 /* - * rx/tx dma descriptor - */ -struct bcm_enet_desc { - u32 len_stat; - u32 address; -}; - -#define DMADESC_LENGTH_SHIFT 16 -#define DMADESC_LENGTH_MASK (0xfff << DMADESC_LENGTH_SHIFT) -#define DMADESC_OWNER_MASK (1 << 15) -#define DMADESC_EOP_MASK (1 << 14) -#define DMADESC_SOP_MASK (1 << 13) -#define DMADESC_ESOP_MASK (DMADESC_EOP_MASK | DMADESC_SOP_MASK) -#define DMADESC_WRAP_MASK (1 << 12) - -#define DMADESC_UNDER_MASK (1 << 9) -#define DMADESC_APPEND_CRC (1 << 8) -#define DMADESC_OVSIZE_MASK (1 << 4) -#define DMADESC_RXER_MASK (1 << 2) -#define DMADESC_CRC_MASK (1 << 1) -#define DMADESC_OV_MASK (1 << 0) -#define DMADESC_ERR_MASK (DMADESC_UNDER_MASK | \ - DMADESC_OVSIZE_MASK | \ - DMADESC_RXER_MASK | \ - DMADESC_CRC_MASK | \ - DMADESC_OV_MASK) - - -/* * MIB Counters register definitions */ #define ETH_MIB_TX_GD_OCTETS 0 diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index a688a2d..f97719c 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -3,13 +3,14 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2009 Cavium Networks + * Copyright (C) 2009-2012 Cavium, Inc */ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/etherdevice.h> #include <linux/capability.h> +#include <linux/net_tstamp.h> #include <linux/interrupt.h> #include <linux/netdevice.h> #include <linux/spinlock.h> @@ -33,8 +34,7 @@ #define OCTEON_MGMT_NAPI_WEIGHT 16 -/* - * Ring sizes that are powers of two allow for more efficient modulo +/* Ring sizes that are powers of two allow for more efficient modulo * opertions. */ #define OCTEON_MGMT_RX_RING_SIZE 512 @@ -93,6 +93,7 @@ union mgmt_port_ring_entry { #define AGL_GMX_RX_ADR_CAM4 0x1a0 #define AGL_GMX_RX_ADR_CAM5 0x1a8 +#define AGL_GMX_TX_CLK 0x208 #define AGL_GMX_TX_STATS_CTL 0x268 #define AGL_GMX_TX_CTL 0x270 #define AGL_GMX_TX_STAT0 0x280 @@ -110,8 +111,10 @@ struct octeon_mgmt { struct net_device *netdev; u64 mix; u64 agl; + u64 agl_prt_ctl; int port; int irq; + bool has_rx_tstamp; u64 *tx_ring; dma_addr_t tx_ring_handle; unsigned int tx_next; @@ -131,6 +134,7 @@ struct octeon_mgmt { spinlock_t lock; unsigned int last_duplex; unsigned int last_link; + unsigned int last_speed; struct device *dev; struct napi_struct napi; struct tasklet_struct tx_clean_tasklet; @@ -140,6 +144,8 @@ struct octeon_mgmt { resource_size_t mix_size; resource_size_t agl_phys; resource_size_t agl_size; + resource_size_t agl_prt_ctl_phys; + resource_size_t agl_prt_ctl_size; }; static void octeon_mgmt_set_rx_irq(struct octeon_mgmt *p, int enable) @@ -166,22 +172,22 @@ static void octeon_mgmt_set_tx_irq(struct octeon_mgmt *p, int enable) spin_unlock_irqrestore(&p->lock, flags); } -static inline void octeon_mgmt_enable_rx_irq(struct octeon_mgmt *p) +static void octeon_mgmt_enable_rx_irq(struct octeon_mgmt *p) { octeon_mgmt_set_rx_irq(p, 1); } -static inline void octeon_mgmt_disable_rx_irq(struct octeon_mgmt *p) +static void octeon_mgmt_disable_rx_irq(struct octeon_mgmt *p) { octeon_mgmt_set_rx_irq(p, 0); } -static inline void octeon_mgmt_enable_tx_irq(struct octeon_mgmt *p) +static void octeon_mgmt_enable_tx_irq(struct octeon_mgmt *p) { octeon_mgmt_set_tx_irq(p, 1); } -static inline void octeon_mgmt_disable_tx_irq(struct octeon_mgmt *p) +static void octeon_mgmt_disable_tx_irq(struct octeon_mgmt *p) { octeon_mgmt_set_tx_irq(p, 0); } @@ -233,6 +239,28 @@ static void octeon_mgmt_rx_fill_ring(struct net_device *netdev) } } +static ktime_t ptp_to_ktime(u64 ptptime) +{ + ktime_t ktimebase; + u64 ptpbase; + unsigned long flags; + + local_irq_save(flags); + /* Fill the icache with the code */ + ktime_get_real(); + /* Flush all pending operations */ + mb(); + /* Read the time and PTP clock as close together as + * possible. It is important that this sequence take the same + * amount of time to reduce jitter + */ + ktimebase = ktime_get_real(); + ptpbase = cvmx_read_csr(CVMX_MIO_PTP_CLOCK_HI); + local_irq_restore(flags); + + return ktime_sub_ns(ktimebase, ptpbase - ptptime); +} + static void octeon_mgmt_clean_tx_buffers(struct octeon_mgmt *p) { union cvmx_mixx_orcnt mix_orcnt; @@ -272,6 +300,20 @@ static void octeon_mgmt_clean_tx_buffers(struct octeon_mgmt *p) dma_unmap_single(p->dev, re.s.addr, re.s.len, DMA_TO_DEVICE); + + /* Read the hardware TX timestamp if one was recorded */ + if (unlikely(re.s.tstamp)) { + struct skb_shared_hwtstamps ts; + /* Read the timestamp */ + u64 ns = cvmx_read_csr(CVMX_MIXX_TSTAMP(p->port)); + /* Remove the timestamp from the FIFO */ + cvmx_write_csr(CVMX_MIXX_TSCTL(p->port), 0); + /* Tell the kernel about the timestamp */ + ts.syststamp = ptp_to_ktime(ns); + ts.hwtstamp = ns_to_ktime(ns); + skb_tstamp_tx(skb, &ts); + } + dev_kfree_skb_any(skb); cleaned++; @@ -372,14 +414,23 @@ static int octeon_mgmt_receive_one(struct octeon_mgmt *p) /* A good packet, send it up. */ skb_put(skb, re.s.len); good: + /* Process the RX timestamp if it was recorded */ + if (p->has_rx_tstamp) { + /* The first 8 bytes are the timestamp */ + u64 ns = *(u64 *)skb->data; + struct skb_shared_hwtstamps *ts; + ts = skb_hwtstamps(skb); + ts->hwtstamp = ns_to_ktime(ns); + ts->syststamp = ptp_to_ktime(ns); + __skb_pull(skb, 8); + } skb->protocol = eth_type_trans(skb, netdev); netdev->stats.rx_packets++; netdev->stats.rx_bytes += skb->len; netif_receive_skb(skb); rc = 0; } else if (re.s.code == RING_ENTRY_CODE_MORE) { - /* - * Packet split across skbs. This can happen if we + /* Packet split across skbs. This can happen if we * increase the MTU. Buffers that are already in the * rx ring can then end up being too small. As the rx * ring is refilled, buffers sized for the new MTU @@ -409,8 +460,7 @@ good: } else { /* Some other error, discard it. */ dev_kfree_skb_any(skb); - /* - * Error statistics are accumulated in + /* Error statistics are accumulated in * octeon_mgmt_update_rx_stats. */ } @@ -488,7 +538,7 @@ static void octeon_mgmt_reset_hw(struct octeon_mgmt *p) mix_ctl.s.reset = 1; cvmx_write_csr(p->mix + MIX_CTL, mix_ctl.u64); cvmx_read_csr(p->mix + MIX_CTL); - cvmx_wait(64); + octeon_io_clk_delay(64); mix_bist.u64 = cvmx_read_csr(p->mix + MIX_BIST); if (mix_bist.u64) @@ -537,8 +587,7 @@ static void octeon_mgmt_set_rx_filtering(struct net_device *netdev) cam_mode = 0; available_cam_entries = 8; } else { - /* - * One CAM entry for the primary address, leaves seven + /* One CAM entry for the primary address, leaves seven * for the secondary addresses. */ available_cam_entries = 7 - netdev->uc.count; @@ -595,12 +644,10 @@ static void octeon_mgmt_set_rx_filtering(struct net_device *netdev) static int octeon_mgmt_set_mac_address(struct net_device *netdev, void *addr) { - struct sockaddr *sa = addr; + int r = eth_mac_addr(netdev, addr); - if (!is_valid_ether_addr(sa->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(netdev->dev_addr, sa->sa_data, ETH_ALEN); + if (r) + return r; octeon_mgmt_set_rx_filtering(netdev); @@ -612,8 +659,7 @@ static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu) struct octeon_mgmt *p = netdev_priv(netdev); int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM; - /* - * Limit the MTU to make sure the ethernet packets are between + /* Limit the MTU to make sure the ethernet packets are between * 64 bytes and 16383 bytes. */ if (size_without_fcs < 64 || size_without_fcs > 16383) { @@ -656,53 +702,258 @@ static irqreturn_t octeon_mgmt_interrupt(int cpl, void *dev_id) return IRQ_HANDLED; } +static int octeon_mgmt_ioctl_hwtstamp(struct net_device *netdev, + struct ifreq *rq, int cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + struct hwtstamp_config config; + union cvmx_mio_ptp_clock_cfg ptp; + union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl; + bool have_hw_timestamps = false; + + if (copy_from_user(&config, rq->ifr_data, sizeof(config))) + return -EFAULT; + + if (config.flags) /* reserved for future extensions */ + return -EINVAL; + + /* Check the status of hardware for tiemstamps */ + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + /* Get the current state of the PTP clock */ + ptp.u64 = cvmx_read_csr(CVMX_MIO_PTP_CLOCK_CFG); + if (!ptp.s.ext_clk_en) { + /* The clock has not been configured to use an + * external source. Program it to use the main clock + * reference. + */ + u64 clock_comp = (NSEC_PER_SEC << 32) / octeon_get_io_clock_rate(); + if (!ptp.s.ptp_en) + cvmx_write_csr(CVMX_MIO_PTP_CLOCK_COMP, clock_comp); + pr_info("PTP Clock: Using sclk reference at %lld Hz\n", + (NSEC_PER_SEC << 32) / clock_comp); + } else { + /* The clock is already programmed to use a GPIO */ + u64 clock_comp = cvmx_read_csr(CVMX_MIO_PTP_CLOCK_COMP); + pr_info("PTP Clock: Using GPIO %d at %lld Hz\n", + ptp.s.ext_clk_in, + (NSEC_PER_SEC << 32) / clock_comp); + } + + /* Enable the clock if it wasn't done already */ + if (!ptp.s.ptp_en) { + ptp.s.ptp_en = 1; + cvmx_write_csr(CVMX_MIO_PTP_CLOCK_CFG, ptp.u64); + } + have_hw_timestamps = true; + } + + if (!have_hw_timestamps) + return -EINVAL; + + switch (config.tx_type) { + case HWTSTAMP_TX_OFF: + case HWTSTAMP_TX_ON: + break; + default: + return -ERANGE; + } + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + p->has_rx_tstamp = false; + rxx_frm_ctl.u64 = cvmx_read_csr(p->agl + AGL_GMX_RX_FRM_CTL); + rxx_frm_ctl.s.ptp_mode = 0; + cvmx_write_csr(p->agl + AGL_GMX_RX_FRM_CTL, rxx_frm_ctl.u64); + break; + case HWTSTAMP_FILTER_ALL: + case HWTSTAMP_FILTER_SOME: + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + p->has_rx_tstamp = have_hw_timestamps; + config.rx_filter = HWTSTAMP_FILTER_ALL; + if (p->has_rx_tstamp) { + rxx_frm_ctl.u64 = cvmx_read_csr(p->agl + AGL_GMX_RX_FRM_CTL); + rxx_frm_ctl.s.ptp_mode = 1; + cvmx_write_csr(p->agl + AGL_GMX_RX_FRM_CTL, rxx_frm_ctl.u64); + } + break; + default: + return -ERANGE; + } + + if (copy_to_user(rq->ifr_data, &config, sizeof(config))) + return -EFAULT; + + return 0; +} + static int octeon_mgmt_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) { struct octeon_mgmt *p = netdev_priv(netdev); - if (!netif_running(netdev)) + switch (cmd) { + case SIOCSHWTSTAMP: + return octeon_mgmt_ioctl_hwtstamp(netdev, rq, cmd); + default: + if (p->phydev) + return phy_mii_ioctl(p->phydev, rq, cmd); return -EINVAL; + } +} - if (!p->phydev) - return -EINVAL; +static void octeon_mgmt_disable_link(struct octeon_mgmt *p) +{ + union cvmx_agl_gmx_prtx_cfg prtx_cfg; - return phy_mii_ioctl(p->phydev, rq, cmd); + /* Disable GMX before we make any changes. */ + prtx_cfg.u64 = cvmx_read_csr(p->agl + AGL_GMX_PRT_CFG); + prtx_cfg.s.en = 0; + prtx_cfg.s.tx_en = 0; + prtx_cfg.s.rx_en = 0; + cvmx_write_csr(p->agl + AGL_GMX_PRT_CFG, prtx_cfg.u64); + + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + int i; + for (i = 0; i < 10; i++) { + prtx_cfg.u64 = cvmx_read_csr(p->agl + AGL_GMX_PRT_CFG); + if (prtx_cfg.s.tx_idle == 1 || prtx_cfg.s.rx_idle == 1) + break; + mdelay(1); + i++; + } + } +} + +static void octeon_mgmt_enable_link(struct octeon_mgmt *p) +{ + union cvmx_agl_gmx_prtx_cfg prtx_cfg; + + /* Restore the GMX enable state only if link is set */ + prtx_cfg.u64 = cvmx_read_csr(p->agl + AGL_GMX_PRT_CFG); + prtx_cfg.s.tx_en = 1; + prtx_cfg.s.rx_en = 1; + prtx_cfg.s.en = 1; + cvmx_write_csr(p->agl + AGL_GMX_PRT_CFG, prtx_cfg.u64); +} + +static void octeon_mgmt_update_link(struct octeon_mgmt *p) +{ + union cvmx_agl_gmx_prtx_cfg prtx_cfg; + + prtx_cfg.u64 = cvmx_read_csr(p->agl + AGL_GMX_PRT_CFG); + + if (!p->phydev->link) + prtx_cfg.s.duplex = 1; + else + prtx_cfg.s.duplex = p->phydev->duplex; + + switch (p->phydev->speed) { + case 10: + prtx_cfg.s.speed = 0; + prtx_cfg.s.slottime = 0; + + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + prtx_cfg.s.burst = 1; + prtx_cfg.s.speed_msb = 1; + } + break; + case 100: + prtx_cfg.s.speed = 0; + prtx_cfg.s.slottime = 0; + + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + prtx_cfg.s.burst = 1; + prtx_cfg.s.speed_msb = 0; + } + break; + case 1000: + /* 1000 MBits is only supported on 6XXX chips */ + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + prtx_cfg.s.speed = 1; + prtx_cfg.s.speed_msb = 0; + /* Only matters for half-duplex */ + prtx_cfg.s.slottime = 1; + prtx_cfg.s.burst = p->phydev->duplex; + } + break; + case 0: /* No link */ + default: + break; + } + + /* Write the new GMX setting with the port still disabled. */ + cvmx_write_csr(p->agl + AGL_GMX_PRT_CFG, prtx_cfg.u64); + + /* Read GMX CFG again to make sure the config is completed. */ + prtx_cfg.u64 = cvmx_read_csr(p->agl + AGL_GMX_PRT_CFG); + + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + union cvmx_agl_gmx_txx_clk agl_clk; + union cvmx_agl_prtx_ctl prtx_ctl; + + prtx_ctl.u64 = cvmx_read_csr(p->agl_prt_ctl); + agl_clk.u64 = cvmx_read_csr(p->agl + AGL_GMX_TX_CLK); + /* MII (both speeds) and RGMII 1000 speed. */ + agl_clk.s.clk_cnt = 1; + if (prtx_ctl.s.mode == 0) { /* RGMII mode */ + if (p->phydev->speed == 10) + agl_clk.s.clk_cnt = 50; + else if (p->phydev->speed == 100) + agl_clk.s.clk_cnt = 5; + } + cvmx_write_csr(p->agl + AGL_GMX_TX_CLK, agl_clk.u64); + } } static void octeon_mgmt_adjust_link(struct net_device *netdev) { struct octeon_mgmt *p = netdev_priv(netdev); - union cvmx_agl_gmx_prtx_cfg prtx_cfg; unsigned long flags; int link_changed = 0; + if (!p->phydev) + return; + spin_lock_irqsave(&p->lock, flags); - if (p->phydev->link) { - if (!p->last_link) - link_changed = 1; - if (p->last_duplex != p->phydev->duplex) { - p->last_duplex = p->phydev->duplex; - prtx_cfg.u64 = cvmx_read_csr(p->agl + AGL_GMX_PRT_CFG); - prtx_cfg.s.duplex = p->phydev->duplex; - cvmx_write_csr(p->agl + AGL_GMX_PRT_CFG, prtx_cfg.u64); - } - } else { - if (p->last_link) - link_changed = -1; + + + if (!p->phydev->link && p->last_link) + link_changed = -1; + + if (p->phydev->link + && (p->last_duplex != p->phydev->duplex + || p->last_link != p->phydev->link + || p->last_speed != p->phydev->speed)) { + octeon_mgmt_disable_link(p); + link_changed = 1; + octeon_mgmt_update_link(p); + octeon_mgmt_enable_link(p); } + p->last_link = p->phydev->link; + p->last_speed = p->phydev->speed; + p->last_duplex = p->phydev->duplex; + spin_unlock_irqrestore(&p->lock, flags); if (link_changed != 0) { if (link_changed > 0) { - netif_carrier_on(netdev); pr_info("%s: Link is up - %d/%s\n", netdev->name, p->phydev->speed, DUPLEX_FULL == p->phydev->duplex ? "Full" : "Half"); } else { - netif_carrier_off(netdev); pr_info("%s: Link is down\n", netdev->name); } } @@ -723,9 +974,7 @@ static int octeon_mgmt_init_phy(struct net_device *netdev) PHY_INTERFACE_MODE_MII); if (!p->phydev) - return -1; - - phy_start_aneg(p->phydev); + return -ENODEV; return 0; } @@ -733,12 +982,10 @@ static int octeon_mgmt_init_phy(struct net_device *netdev) static int octeon_mgmt_open(struct net_device *netdev) { struct octeon_mgmt *p = netdev_priv(netdev); - int port = p->port; union cvmx_mixx_ctl mix_ctl; union cvmx_agl_gmx_inf_mode agl_gmx_inf_mode; union cvmx_mixx_oring1 oring1; union cvmx_mixx_iring1 iring1; - union cvmx_agl_gmx_prtx_cfg prtx_cfg; union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl; union cvmx_mixx_irhwm mix_irhwm; union cvmx_mixx_orhwm mix_orhwm; @@ -785,9 +1032,30 @@ static int octeon_mgmt_open(struct net_device *netdev) } while (mix_ctl.s.reset); } - agl_gmx_inf_mode.u64 = 0; - agl_gmx_inf_mode.s.en = 1; - cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); + if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) { + agl_gmx_inf_mode.u64 = 0; + agl_gmx_inf_mode.s.en = 1; + cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); + } + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) + || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + /* Force compensation values, as they are not + * determined properly by HW + */ + union cvmx_agl_gmx_drv_ctl drv_ctl; + + drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL); + if (p->port) { + drv_ctl.s.byp_en1 = 1; + drv_ctl.s.nctl1 = 6; + drv_ctl.s.pctl1 = 6; + } else { + drv_ctl.s.byp_en = 1; + drv_ctl.s.nctl = 6; + drv_ctl.s.pctl = 6; + } + cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64); + } oring1.u64 = 0; oring1.s.obase = p->tx_ring_handle >> 3; @@ -799,18 +1067,12 @@ static int octeon_mgmt_open(struct net_device *netdev) iring1.s.isize = OCTEON_MGMT_RX_RING_SIZE; cvmx_write_csr(p->mix + MIX_IRING1, iring1.u64); - /* Disable packet I/O. */ - prtx_cfg.u64 = cvmx_read_csr(p->agl + AGL_GMX_PRT_CFG); - prtx_cfg.s.en = 0; - cvmx_write_csr(p->agl + AGL_GMX_PRT_CFG, prtx_cfg.u64); - memcpy(sa.sa_data, netdev->dev_addr, ETH_ALEN); octeon_mgmt_set_mac_address(netdev, &sa); octeon_mgmt_change_mtu(netdev, netdev->mtu); - /* - * Enable the port HW. Packets are not allowed until + /* Enable the port HW. Packets are not allowed until * cvmx_mgmt_port_enable() is called. */ mix_ctl.u64 = 0; @@ -819,27 +1081,70 @@ static int octeon_mgmt_open(struct net_device *netdev) mix_ctl.s.nbtarb = 0; /* Arbitration mode */ /* MII CB-request FIFO programmable high watermark */ mix_ctl.s.mrq_hwm = 1; +#ifdef __LITTLE_ENDIAN + mix_ctl.s.lendian = 1; +#endif cvmx_write_csr(p->mix + MIX_CTL, mix_ctl.u64); - if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) - || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { - /* - * Force compensation values, as they are not - * determined properly by HW - */ - union cvmx_agl_gmx_drv_ctl drv_ctl; + /* Read the PHY to find the mode of the interface. */ + if (octeon_mgmt_init_phy(netdev)) { + dev_err(p->dev, "Cannot initialize PHY on MIX%d.\n", p->port); + goto err_noirq; + } - drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL); - if (port) { - drv_ctl.s.byp_en1 = 1; - drv_ctl.s.nctl1 = 6; - drv_ctl.s.pctl1 = 6; - } else { - drv_ctl.s.byp_en = 1; - drv_ctl.s.nctl = 6; - drv_ctl.s.pctl = 6; + /* Set the mode of the interface, RGMII/MII. */ + if (OCTEON_IS_MODEL(OCTEON_CN6XXX) && p->phydev) { + union cvmx_agl_prtx_ctl agl_prtx_ctl; + int rgmii_mode = (p->phydev->supported & + (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)) != 0; + + agl_prtx_ctl.u64 = cvmx_read_csr(p->agl_prt_ctl); + agl_prtx_ctl.s.mode = rgmii_mode ? 0 : 1; + cvmx_write_csr(p->agl_prt_ctl, agl_prtx_ctl.u64); + + /* MII clocks counts are based on the 125Mhz + * reference, which has an 8nS period. So our delays + * need to be multiplied by this factor. + */ +#define NS_PER_PHY_CLK 8 + + /* Take the DLL and clock tree out of reset */ + agl_prtx_ctl.u64 = cvmx_read_csr(p->agl_prt_ctl); + agl_prtx_ctl.s.clkrst = 0; + if (rgmii_mode) { + agl_prtx_ctl.s.dllrst = 0; + agl_prtx_ctl.s.clktx_byp = 0; } - cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64); + cvmx_write_csr(p->agl_prt_ctl, agl_prtx_ctl.u64); + cvmx_read_csr(p->agl_prt_ctl); /* Force write out before wait */ + + /* Wait for the DLL to lock. External 125 MHz + * reference clock must be stable at this point. + */ + ndelay(256 * NS_PER_PHY_CLK); + + /* Enable the interface */ + agl_prtx_ctl.u64 = cvmx_read_csr(p->agl_prt_ctl); + agl_prtx_ctl.s.enable = 1; + cvmx_write_csr(p->agl_prt_ctl, agl_prtx_ctl.u64); + + /* Read the value back to force the previous write */ + agl_prtx_ctl.u64 = cvmx_read_csr(p->agl_prt_ctl); + + /* Enable the compensation controller */ + agl_prtx_ctl.s.comp = 1; + agl_prtx_ctl.s.drv_byp = 0; + cvmx_write_csr(p->agl_prt_ctl, agl_prtx_ctl.u64); + /* Force write out before wait. */ + cvmx_read_csr(p->agl_prt_ctl); + + /* For compensation state to lock. */ + ndelay(1040 * NS_PER_PHY_CLK); + + /* Some Ethernet switches cannot handle standard + * Interframe Gap, increase to 16 bytes. + */ + cvmx_write_csr(CVMX_AGL_GMX_TX_IFG, 0x88); } octeon_mgmt_rx_fill_ring(netdev); @@ -870,7 +1175,7 @@ static int octeon_mgmt_open(struct net_device *netdev) /* Interrupt when we have 1 or more packets to clean. */ mix_orhwm.u64 = 0; - mix_orhwm.s.orhwm = 1; + mix_orhwm.s.orhwm = 0; cvmx_write_csr(p->mix + MIX_ORHWM, mix_orhwm.u64); /* Enable receive and transmit interrupts */ @@ -879,13 +1184,12 @@ static int octeon_mgmt_open(struct net_device *netdev) mix_intena.s.othena = 1; cvmx_write_csr(p->mix + MIX_INTENA, mix_intena.u64); - /* Enable packet I/O. */ rxx_frm_ctl.u64 = 0; + rxx_frm_ctl.s.ptp_mode = p->has_rx_tstamp ? 1 : 0; rxx_frm_ctl.s.pre_align = 1; - /* - * When set, disables the length check for non-min sized pkts + /* When set, disables the length check for non-min sized pkts * with padding in the client data. */ rxx_frm_ctl.s.pad_len = 1; @@ -903,33 +1207,26 @@ static int octeon_mgmt_open(struct net_device *netdev) rxx_frm_ctl.s.ctl_drp = 1; /* Strip off the preamble */ rxx_frm_ctl.s.pre_strp = 1; - /* - * This port is configured to send PREAMBLE+SFD to begin every + /* This port is configured to send PREAMBLE+SFD to begin every * frame. GMX checks that the PREAMBLE is sent correctly. */ rxx_frm_ctl.s.pre_chk = 1; cvmx_write_csr(p->agl + AGL_GMX_RX_FRM_CTL, rxx_frm_ctl.u64); - /* Enable the AGL block */ - agl_gmx_inf_mode.u64 = 0; - agl_gmx_inf_mode.s.en = 1; - cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); - - /* Configure the port duplex and enables */ - prtx_cfg.u64 = cvmx_read_csr(p->agl + AGL_GMX_PRT_CFG); - prtx_cfg.s.tx_en = 1; - prtx_cfg.s.rx_en = 1; - prtx_cfg.s.en = 1; - p->last_duplex = 1; - prtx_cfg.s.duplex = p->last_duplex; - cvmx_write_csr(p->agl + AGL_GMX_PRT_CFG, prtx_cfg.u64); + /* Configure the port duplex, speed and enables */ + octeon_mgmt_disable_link(p); + if (p->phydev) + octeon_mgmt_update_link(p); + octeon_mgmt_enable_link(p); p->last_link = 0; - netif_carrier_off(netdev); - - if (octeon_mgmt_init_phy(netdev)) { - dev_err(p->dev, "Cannot initialize PHY.\n"); - goto err_noirq; + p->last_speed = 0; + /* PHY is not present in simulator. The carrier is enabled + * while initializing the phy for simulator, leave it enabled. + */ + if (p->phydev) { + netif_carrier_off(netdev); + phy_start_aneg(p->phydev); } netif_wake_queue(netdev); @@ -959,6 +1256,7 @@ static int octeon_mgmt_stop(struct net_device *netdev) if (p->phydev) phy_disconnect(p->phydev); + p->phydev = NULL; netif_carrier_off(netdev); @@ -991,6 +1289,7 @@ static int octeon_mgmt_xmit(struct sk_buff *skb, struct net_device *netdev) int rv = NETDEV_TX_BUSY; re.d64 = 0; + re.s.tstamp = ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) != 0); re.s.len = skb->len; re.s.addr = dma_map_single(p->dev, skb->data, skb->len, @@ -1031,6 +1330,7 @@ static int octeon_mgmt_xmit(struct sk_buff *skb, struct net_device *netdev) /* Ring the bell. */ cvmx_write_csr(p->mix + MIX_ORING2, 1); + netdev->trans_start = jiffies; rv = NETDEV_TX_OK; out: octeon_mgmt_update_tx_stats(netdev); @@ -1068,7 +1368,7 @@ static int octeon_mgmt_get_settings(struct net_device *netdev, if (p->phydev) return phy_ethtool_gset(p->phydev, cmd); - return -EINVAL; + return -EOPNOTSUPP; } static int octeon_mgmt_set_settings(struct net_device *netdev, @@ -1082,23 +1382,37 @@ static int octeon_mgmt_set_settings(struct net_device *netdev, if (p->phydev) return phy_ethtool_sset(p->phydev, cmd); - return -EINVAL; + return -EOPNOTSUPP; +} + +static int octeon_mgmt_nway_reset(struct net_device *dev) +{ + struct octeon_mgmt *p = netdev_priv(dev); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (p->phydev) + return phy_start_aneg(p->phydev); + + return -EOPNOTSUPP; } static const struct ethtool_ops octeon_mgmt_ethtool_ops = { .get_drvinfo = octeon_mgmt_get_drvinfo, - .get_link = ethtool_op_get_link, .get_settings = octeon_mgmt_get_settings, - .set_settings = octeon_mgmt_set_settings + .set_settings = octeon_mgmt_set_settings, + .nway_reset = octeon_mgmt_nway_reset, + .get_link = ethtool_op_get_link, }; static const struct net_device_ops octeon_mgmt_ops = { .ndo_open = octeon_mgmt_open, .ndo_stop = octeon_mgmt_stop, .ndo_start_xmit = octeon_mgmt_xmit, - .ndo_set_rx_mode = octeon_mgmt_set_rx_filtering, + .ndo_set_rx_mode = octeon_mgmt_set_rx_filtering, .ndo_set_mac_address = octeon_mgmt_set_mac_address, - .ndo_do_ioctl = octeon_mgmt_ioctl, + .ndo_do_ioctl = octeon_mgmt_ioctl, .ndo_change_mtu = octeon_mgmt_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = octeon_mgmt_poll_controller, @@ -1113,6 +1427,7 @@ static int __devinit octeon_mgmt_probe(struct platform_device *pdev) const u8 *mac; struct resource *res_mix; struct resource *res_agl; + struct resource *res_agl_prt_ctl; int len; int result; @@ -1120,6 +1435,8 @@ static int __devinit octeon_mgmt_probe(struct platform_device *pdev) if (netdev == NULL) return -ENOMEM; + SET_NETDEV_DEV(netdev, &pdev->dev); + dev_set_drvdata(&pdev->dev, netdev); p = netdev_priv(netdev); netif_napi_add(netdev, &p->napi, octeon_mgmt_napi_poll, @@ -1127,6 +1444,7 @@ static int __devinit octeon_mgmt_probe(struct platform_device *pdev) p->netdev = netdev; p->dev = &pdev->dev; + p->has_rx_tstamp = false; data = of_get_property(pdev->dev.of_node, "cell-index", &len); if (data && len == sizeof(*data)) { @@ -1159,10 +1477,19 @@ static int __devinit octeon_mgmt_probe(struct platform_device *pdev) goto err; } + res_agl_prt_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 3); + if (res_agl_prt_ctl == NULL) { + dev_err(&pdev->dev, "no 'reg' resource\n"); + result = -ENXIO; + goto err; + } + p->mix_phys = res_mix->start; p->mix_size = resource_size(res_mix); p->agl_phys = res_agl->start; p->agl_size = resource_size(res_agl); + p->agl_prt_ctl_phys = res_agl_prt_ctl->start; + p->agl_prt_ctl_size = resource_size(res_agl_prt_ctl); if (!devm_request_mem_region(&pdev->dev, p->mix_phys, p->mix_size, @@ -1181,10 +1508,18 @@ static int __devinit octeon_mgmt_probe(struct platform_device *pdev) goto err; } + if (!devm_request_mem_region(&pdev->dev, p->agl_prt_ctl_phys, + p->agl_prt_ctl_size, res_agl_prt_ctl->name)) { + result = -ENXIO; + dev_err(&pdev->dev, "request_mem_region (%s) failed\n", + res_agl_prt_ctl->name); + goto err; + } p->mix = (u64)devm_ioremap(&pdev->dev, p->mix_phys, p->mix_size); p->agl = (u64)devm_ioremap(&pdev->dev, p->agl_phys, p->agl_size); - + p->agl_prt_ctl = (u64)devm_ioremap(&pdev->dev, p->agl_prt_ctl_phys, + p->agl_prt_ctl_size); spin_lock_init(&p->lock); skb_queue_head_init(&p->tx_list); @@ -1199,14 +1534,19 @@ static int __devinit octeon_mgmt_probe(struct platform_device *pdev) mac = of_get_mac_address(pdev->dev.of_node); - if (mac) - memcpy(netdev->dev_addr, mac, 6); + if (mac && is_valid_ether_addr(mac)) { + memcpy(netdev->dev_addr, mac, ETH_ALEN); + netdev->addr_assign_type &= ~NET_ADDR_RANDOM; + } else { + eth_hw_addr_random(netdev); + } p->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); pdev->dev.coherent_dma_mask = DMA_BIT_MASK(64); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + netif_carrier_off(netdev); result = register_netdev(netdev); if (result) goto err; diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index d92185a..4b6e4e7 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -36,7 +36,7 @@ if PARPORT config PARPORT_PC tristate "PC-style hardware" depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \ - (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN + (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && !XTENSA ---help--- You should say Y here if you have a PC-style parallel port. All IBM PC compatible computers and some Alphas have PC-style diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 33e3df9..7bf914d 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -68,10 +68,21 @@ config PINCTRL_IMX6Q help Say Y here to enable the imx6q pinctrl driver +config PINCTRL_LANTIQ + bool + depends on LANTIQ + select PINMUX + select PINCONF + config PINCTRL_PXA3xx bool select PINMUX +config PINCTRL_FALCON + bool + depends on SOC_FALCON + depends on PINCTRL_LANTIQ + config PINCTRL_MMP2 bool "MMP2 pin controller driver" depends on ARCH_MMP @@ -199,6 +210,11 @@ config PINCTRL_ARMADA_XP source "drivers/pinctrl/spear/Kconfig" +config PINCTRL_XWAY + bool + depends on SOC_TYPE_XWAY + depends on PINCTRL_LANTIQ + endmenu endif diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f162e01..f395ba5 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_PINCTRL_IMX51) += pinctrl-imx51.o obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o +obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o @@ -40,5 +41,7 @@ obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o +obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o +obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c new file mode 100644 index 0000000..ee73059 --- /dev/null +++ b/drivers/pinctrl/pinctrl-falcon.c @@ -0,0 +1,468 @@ +/* + * linux/drivers/pinctrl/pinmux-falcon.c + * based on linux/drivers/pinctrl/pinmux-pxa910.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> + +#include "pinctrl-lantiq.h" + +#include <lantiq_soc.h> + +/* Multiplexer Control Register */ +#define LTQ_PADC_MUX(x) (x * 0x4) +/* Pull Up Enable Register */ +#define LTQ_PADC_PUEN 0x80 +/* Pull Down Enable Register */ +#define LTQ_PADC_PDEN 0x84 +/* Slew Rate Control Register */ +#define LTQ_PADC_SRC 0x88 +/* Drive Current Control Register */ +#define LTQ_PADC_DCC 0x8C +/* Pad Control Availability Register */ +#define LTQ_PADC_AVAIL 0xF0 + +#define pad_r32(p, reg) ltq_r32(p + reg) +#define pad_w32(p, val, reg) ltq_w32(val, p + reg) +#define pad_w32_mask(c, clear, set, reg) \ + pad_w32(c, (pad_r32(c, reg) & ~(clear)) | (set), reg) + +#define pad_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p))) + +#define PORTS 5 +#define PINS 32 +#define PORT(x) (x / PINS) +#define PORT_PIN(x) (x % PINS) + +#define MFP_FALCON(a, f0, f1, f2, f3) \ +{ \ + .name = #a, \ + .pin = a, \ + .func = { \ + FALCON_MUX_##f0, \ + FALCON_MUX_##f1, \ + FALCON_MUX_##f2, \ + FALCON_MUX_##f3, \ + }, \ +} + +#define GRP_MUX(a, m, p) \ +{ \ + .name = a, \ + .mux = FALCON_MUX_##m, \ + .pins = p, \ + .npins = ARRAY_SIZE(p), \ +} + +enum falcon_mux { + FALCON_MUX_GPIO = 0, + FALCON_MUX_RST, + FALCON_MUX_NTR, + FALCON_MUX_MDIO, + FALCON_MUX_LED, + FALCON_MUX_SPI, + FALCON_MUX_ASC, + FALCON_MUX_I2C, + FALCON_MUX_HOSTIF, + FALCON_MUX_SLIC, + FALCON_MUX_JTAG, + FALCON_MUX_PCM, + FALCON_MUX_MII, + FALCON_MUX_PHY, + FALCON_MUX_NONE = 0xffff, +}; + +static struct pinctrl_pin_desc falcon_pads[PORTS * PINS]; +static int pad_count[PORTS]; + +static void lantiq_load_pin_desc(struct pinctrl_pin_desc *d, int bank, int len) +{ + int base = bank * PINS; + int i; + + for (i = 0; i < len; i++) { + /* strlen("ioXYZ") + 1 = 6 */ + char *name = kzalloc(6, GFP_KERNEL); + snprintf(name, 6, "io%d", base + i); + d[i].number = base + i; + d[i].name = name; + } + pad_count[bank] = len; +} + +static struct ltq_mfp_pin falcon_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_FALCON(GPIO0, RST, GPIO, NONE, NONE), + MFP_FALCON(GPIO1, GPIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO2, GPIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO3, GPIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO4, NTR, GPIO, NONE, NONE), + MFP_FALCON(GPIO5, NTR, GPIO, NONE, NONE), + MFP_FALCON(GPIO6, RST, GPIO, NONE, NONE), + MFP_FALCON(GPIO7, MDIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO8, MDIO, GPIO, NONE, NONE), + MFP_FALCON(GPIO9, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO10, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO11, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO12, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO13, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO14, LED, GPIO, NONE, NONE), + MFP_FALCON(GPIO32, ASC, GPIO, NONE, NONE), + MFP_FALCON(GPIO33, ASC, GPIO, NONE, NONE), + MFP_FALCON(GPIO34, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO35, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO36, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO37, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO38, SPI, GPIO, NONE, NONE), + MFP_FALCON(GPIO39, I2C, GPIO, NONE, NONE), + MFP_FALCON(GPIO40, I2C, GPIO, NONE, NONE), + MFP_FALCON(GPIO41, HOSTIF, GPIO, HOSTIF, JTAG), + MFP_FALCON(GPIO42, HOSTIF, GPIO, HOSTIF, NONE), + MFP_FALCON(GPIO43, SLIC, GPIO, NONE, NONE), + MFP_FALCON(GPIO44, SLIC, GPIO, PCM, ASC), + MFP_FALCON(GPIO45, SLIC, GPIO, PCM, ASC), + MFP_FALCON(GPIO64, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO65, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO66, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO67, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO68, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO69, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO70, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO71, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO72, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO73, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO74, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO75, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO76, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO77, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO78, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO79, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO80, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO81, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO82, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO83, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO84, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO85, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO86, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO87, MII, GPIO, NONE, NONE), + MFP_FALCON(GPIO88, PHY, GPIO, NONE, NONE), +}; + +static const unsigned pins_por[] = {GPIO0}; +static const unsigned pins_ntr[] = {GPIO4}; +static const unsigned pins_ntr8k[] = {GPIO5}; +static const unsigned pins_hrst[] = {GPIO6}; +static const unsigned pins_mdio[] = {GPIO7, GPIO8}; +static const unsigned pins_bled[] = {GPIO7, GPIO10, GPIO11, + GPIO12, GPIO13, GPIO14}; +static const unsigned pins_asc0[] = {GPIO32, GPIO33}; +static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36}; +static const unsigned pins_spi_cs0[] = {GPIO37}; +static const unsigned pins_spi_cs1[] = {GPIO38}; +static const unsigned pins_i2c[] = {GPIO39, GPIO40}; +static const unsigned pins_jtag[] = {GPIO41}; +static const unsigned pins_slic[] = {GPIO43, GPIO44, GPIO45}; +static const unsigned pins_pcm[] = {GPIO44, GPIO45}; +static const unsigned pins_asc1[] = {GPIO44, GPIO45}; + +static struct ltq_pin_group falcon_grps[] = { + GRP_MUX("por", RST, pins_por), + GRP_MUX("ntr", NTR, pins_ntr), + GRP_MUX("ntr8k", NTR, pins_ntr8k), + GRP_MUX("hrst", RST, pins_hrst), + GRP_MUX("mdio", MDIO, pins_mdio), + GRP_MUX("bootled", LED, pins_bled), + GRP_MUX("asc0", ASC, pins_asc0), + GRP_MUX("spi", SPI, pins_spi), + GRP_MUX("spi cs0", SPI, pins_spi_cs0), + GRP_MUX("spi cs1", SPI, pins_spi_cs1), + GRP_MUX("i2c", I2C, pins_i2c), + GRP_MUX("jtag", JTAG, pins_jtag), + GRP_MUX("slic", SLIC, pins_slic), + GRP_MUX("pcm", PCM, pins_pcm), + GRP_MUX("asc1", ASC, pins_asc1), +}; + +static const char * const ltq_rst_grps[] = {"por", "hrst"}; +static const char * const ltq_ntr_grps[] = {"ntr", "ntr8k"}; +static const char * const ltq_mdio_grps[] = {"mdio"}; +static const char * const ltq_bled_grps[] = {"bootled"}; +static const char * const ltq_asc_grps[] = {"asc0", "asc1"}; +static const char * const ltq_spi_grps[] = {"spi", "spi cs0", "spi cs1"}; +static const char * const ltq_i2c_grps[] = {"i2c"}; +static const char * const ltq_jtag_grps[] = {"jtag"}; +static const char * const ltq_slic_grps[] = {"slic"}; +static const char * const ltq_pcm_grps[] = {"pcm"}; + +static struct ltq_pmx_func falcon_funcs[] = { + {"rst", ARRAY_AND_SIZE(ltq_rst_grps)}, + {"ntr", ARRAY_AND_SIZE(ltq_ntr_grps)}, + {"mdio", ARRAY_AND_SIZE(ltq_mdio_grps)}, + {"led", ARRAY_AND_SIZE(ltq_bled_grps)}, + {"asc", ARRAY_AND_SIZE(ltq_asc_grps)}, + {"spi", ARRAY_AND_SIZE(ltq_spi_grps)}, + {"i2c", ARRAY_AND_SIZE(ltq_i2c_grps)}, + {"jtag", ARRAY_AND_SIZE(ltq_jtag_grps)}, + {"slic", ARRAY_AND_SIZE(ltq_slic_grps)}, + {"pcm", ARRAY_AND_SIZE(ltq_pcm_grps)}, +}; + + + + +/* --------- pinconf related code --------- */ +static int falcon_pinconf_group_get(struct pinctrl_dev *pctrldev, + unsigned group, unsigned long *config) +{ + return -ENOTSUPP; +} + +static int falcon_pinconf_group_set(struct pinctrl_dev *pctrldev, + unsigned group, unsigned long config) +{ + return -ENOTSUPP; +} + +static int falcon_pinconf_get(struct pinctrl_dev *pctrldev, + unsigned pin, unsigned long *config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config); + void __iomem *mem = info->membase[PORT(pin)]; + + switch (param) { + case LTQ_PINCONF_PARAM_DRIVE_CURRENT: + *config = LTQ_PINCONF_PACK(param, + !!pad_getbit(mem, LTQ_PADC_DCC, PORT_PIN(pin))); + break; + + case LTQ_PINCONF_PARAM_SLEW_RATE: + *config = LTQ_PINCONF_PACK(param, + !!pad_getbit(mem, LTQ_PADC_SRC, PORT_PIN(pin))); + break; + + case LTQ_PINCONF_PARAM_PULL: + if (pad_getbit(mem, LTQ_PADC_PDEN, PORT_PIN(pin))) + *config = LTQ_PINCONF_PACK(param, 1); + else if (pad_getbit(mem, LTQ_PADC_PUEN, PORT_PIN(pin))) + *config = LTQ_PINCONF_PACK(param, 2); + else + *config = LTQ_PINCONF_PACK(param, 0); + + break; + + default: + return -ENOTSUPP; + } + + return 0; +} + +static int falcon_pinconf_set(struct pinctrl_dev *pctrldev, + unsigned pin, unsigned long config) +{ + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); + int arg = LTQ_PINCONF_UNPACK_ARG(config); + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + void __iomem *mem = info->membase[PORT(pin)]; + u32 reg; + + switch (param) { + case LTQ_PINCONF_PARAM_DRIVE_CURRENT: + reg = LTQ_PADC_DCC; + break; + + case LTQ_PINCONF_PARAM_SLEW_RATE: + reg = LTQ_PADC_SRC; + break; + + case LTQ_PINCONF_PARAM_PULL: + if (arg == 1) + reg = LTQ_PADC_PDEN; + else + reg = LTQ_PADC_PUEN; + break; + + default: + pr_err("%s: Invalid config param %04x\n", + pinctrl_dev_get_name(pctrldev), param); + return -ENOTSUPP; + } + + pad_w32(mem, BIT(PORT_PIN(pin)), reg); + if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin)))) + return -ENOTSUPP; + return 0; +} + +static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev, + struct seq_file *s, unsigned offset) +{ +} + +static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev, + struct seq_file *s, unsigned selector) +{ +} + +struct pinconf_ops falcon_pinconf_ops = { + .pin_config_get = falcon_pinconf_get, + .pin_config_set = falcon_pinconf_set, + .pin_config_group_get = falcon_pinconf_group_get, + .pin_config_group_set = falcon_pinconf_group_set, + .pin_config_dbg_show = falcon_pinconf_dbg_show, + .pin_config_group_dbg_show = falcon_pinconf_group_dbg_show, +}; + +static struct pinctrl_desc falcon_pctrl_desc = { + .owner = THIS_MODULE, + .pins = falcon_pads, + .confops = &falcon_pinconf_ops, +}; + +static inline int falcon_mux_apply(struct pinctrl_dev *pctrldev, + int mfp, int mux) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int port = PORT(info->mfp[mfp].pin); + + if ((port >= PORTS) || (!info->membase[port])) + return -ENODEV; + + pad_w32(info->membase[port], mux, + LTQ_PADC_MUX(PORT_PIN(info->mfp[mfp].pin))); + return 0; +} + +static const struct ltq_cfg_param falcon_cfg_params[] = { + {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, + {"lantiq,drive-current", LTQ_PINCONF_PARAM_DRIVE_CURRENT}, + {"lantiq,slew-rate", LTQ_PINCONF_PARAM_SLEW_RATE}, +}; + +static struct ltq_pinmux_info falcon_info = { + .desc = &falcon_pctrl_desc, + .apply_mux = falcon_mux_apply, +}; + + + + +/* --------- register the pinctrl layer --------- */ + +int pinctrl_falcon_get_range_size(int id) +{ + u32 avail; + + if ((id >= PORTS) || (!falcon_info.membase[id])) + return -EINVAL; + + avail = pad_r32(falcon_info.membase[id], LTQ_PADC_AVAIL); + + return fls(avail); +} + +void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range) +{ + pinctrl_add_gpio_range(falcon_info.pctrl, range); +} + +static int pinctrl_falcon_probe(struct platform_device *pdev) +{ + struct device_node *np; + int pad_count = 0; + int ret = 0; + + /* load and remap the pad resources of the different banks */ + for_each_compatible_node(np, NULL, "lantiq,pad-falcon") { + struct platform_device *ppdev = of_find_device_by_node(np); + const __be32 *bank = of_get_property(np, "lantiq,bank", NULL); + struct resource res; + u32 avail; + int pins; + + if (!ppdev) { + dev_err(&pdev->dev, "failed to find pad pdev\n"); + continue; + } + if (!bank || *bank >= PORTS) + continue; + if (of_address_to_resource(np, 0, &res)) + continue; + falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL); + if (IS_ERR(falcon_info.clk[*bank])) { + dev_err(&ppdev->dev, "failed to get clock\n"); + return PTR_ERR(falcon_info.clk[*bank]); + } + falcon_info.membase[*bank] = + devm_request_and_ioremap(&pdev->dev, &res); + if (!falcon_info.membase[*bank]) { + dev_err(&pdev->dev, + "Failed to remap memory for bank %d\n", + *bank); + return -ENOMEM; + } + avail = pad_r32(falcon_info.membase[*bank], + LTQ_PADC_AVAIL); + pins = fls(avail); + lantiq_load_pin_desc(&falcon_pads[pad_count], *bank, pins); + pad_count += pins; + clk_enable(falcon_info.clk[*bank]); + dev_dbg(&pdev->dev, "found %s with %d pads\n", + res.name, pins); + } + dev_dbg(&pdev->dev, "found a total of %d pads\n", pad_count); + falcon_pctrl_desc.name = dev_name(&pdev->dev); + falcon_pctrl_desc.npins = pad_count; + + falcon_info.mfp = falcon_mfp; + falcon_info.num_mfp = ARRAY_SIZE(falcon_mfp); + falcon_info.grps = falcon_grps; + falcon_info.num_grps = ARRAY_SIZE(falcon_grps); + falcon_info.funcs = falcon_funcs; + falcon_info.num_funcs = ARRAY_SIZE(falcon_funcs); + + ret = ltq_pinctrl_register(pdev, &falcon_info); + if (!ret) + dev_info(&pdev->dev, "Init done\n"); + return ret; +} + +static const struct of_device_id falcon_match[] = { + { .compatible = "lantiq,pinctrl-falcon" }, + {}, +}; +MODULE_DEVICE_TABLE(of, falcon_match); + +static struct platform_driver pinctrl_falcon_driver = { + .probe = pinctrl_falcon_probe, + .driver = { + .name = "pinctrl-falcon", + .owner = THIS_MODULE, + .of_match_table = falcon_match, + }, +}; + +int __init pinctrl_falcon_init(void) +{ + return platform_driver_register(&pinctrl_falcon_driver); +} + +core_initcall_sync(pinctrl_falcon_init); diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c new file mode 100644 index 0000000..07ba768 --- /dev/null +++ b/drivers/pinctrl/pinctrl-lantiq.c @@ -0,0 +1,342 @@ +/* + * linux/drivers/pinctrl/pinctrl-lantiq.c + * based on linux/drivers/pinctrl/pinctrl-pxa3xx.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include "pinctrl-lantiq.h" + +static int ltq_get_group_count(struct pinctrl_dev *pctrldev) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + return info->num_grps; +} + +static const char *ltq_get_group_name(struct pinctrl_dev *pctrldev, + unsigned selector) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + if (selector >= info->num_grps) + return NULL; + return info->grps[selector].name; +} + +static int ltq_get_group_pins(struct pinctrl_dev *pctrldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + if (selector >= info->num_grps) + return -EINVAL; + *pins = info->grps[selector].pins; + *num_pins = info->grps[selector].npins; + return 0; +} + +void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(map[i].data.configs.configs); + kfree(map); +} + +static void ltq_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned offset) +{ + seq_printf(s, " %s", dev_name(pctldev->dev)); +} + +static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + unsigned long configs[3]; + unsigned num_configs = 0; + struct property *prop; + const char *group, *pin; + const char *function; + int ret, i; + + ret = of_property_read_string(np, "lantiq,function", &function); + if (!ret) { + of_property_for_each_string(np, "lantiq,groups", prop, group) { + (*map)->type = PIN_MAP_TYPE_MUX_GROUP; + (*map)->name = function; + (*map)->data.mux.group = group; + (*map)->data.mux.function = function; + (*map)++; + } + if (of_find_property(np, "lantiq,pins", NULL)) + dev_err(pctldev->dev, + "%s mixes pins and groups settings\n", + np->name); + return 0; + } + + for (i = 0; i < info->num_params; i++) { + u32 val; + int ret = of_property_read_u32(np, + info->params[i].property, &val); + if (!ret) + configs[num_configs++] = + LTQ_PINCONF_PACK(info->params[i].param, + val); + } + + if (!num_configs) + return -EINVAL; + + of_property_for_each_string(np, "lantiq,pins", prop, pin) { + (*map)->data.configs.configs = kmemdup(configs, + num_configs * sizeof(unsigned long), + GFP_KERNEL); + (*map)->type = PIN_MAP_TYPE_CONFIGS_PIN; + (*map)->name = pin; + (*map)->data.configs.group_or_pin = pin; + (*map)->data.configs.num_configs = num_configs; + (*map)++; + } + return 0; +} + +static int ltq_pinctrl_dt_subnode_size(struct device_node *np) +{ + int ret; + + ret = of_property_count_strings(np, "lantiq,groups"); + if (ret < 0) + ret = of_property_count_strings(np, "lantiq,pins"); + return ret; +} + +int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, + unsigned *num_maps) +{ + struct pinctrl_map *tmp; + struct device_node *np; + int ret; + + *num_maps = 0; + for_each_child_of_node(np_config, np) + *num_maps += ltq_pinctrl_dt_subnode_size(np); + *map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL); + if (!*map) + return -ENOMEM; + tmp = *map; + + for_each_child_of_node(np_config, np) { + ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp); + if (ret < 0) { + ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + return 0; +} + +static struct pinctrl_ops ltq_pctrl_ops = { + .get_groups_count = ltq_get_group_count, + .get_group_name = ltq_get_group_name, + .get_group_pins = ltq_get_group_pins, + .pin_dbg_show = ltq_pinctrl_pin_dbg_show, + .dt_node_to_map = ltq_pinctrl_dt_node_to_map, + .dt_free_map = ltq_pinctrl_dt_free_map, +}; + +static int ltq_pmx_func_count(struct pinctrl_dev *pctrldev) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + return info->num_funcs; +} + +static const char *ltq_pmx_func_name(struct pinctrl_dev *pctrldev, + unsigned selector) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + if (selector >= info->num_funcs) + return NULL; + + return info->funcs[selector].name; +} + +static int ltq_pmx_get_groups(struct pinctrl_dev *pctrldev, + unsigned func, + const char * const **groups, + unsigned * const num_groups) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + + *groups = info->funcs[func].groups; + *num_groups = info->funcs[func].num_groups; + + return 0; +} + +/* Return function number. If failure, return negative value. */ +static int match_mux(const struct ltq_mfp_pin *mfp, unsigned mux) +{ + int i; + for (i = 0; i < LTQ_MAX_MUX; i++) { + if (mfp->func[i] == mux) + break; + } + if (i >= LTQ_MAX_MUX) + return -EINVAL; + return i; +} + +/* dont assume .mfp is linearly mapped. find the mfp with the correct .pin */ +static int match_mfp(const struct ltq_pinmux_info *info, int pin) +{ + int i; + for (i = 0; i < info->num_mfp; i++) { + if (info->mfp[i].pin == pin) + return i; + } + return -1; +} + +/* check whether current pin configuration is valid. Negative for failure */ +static int match_group_mux(const struct ltq_pin_group *grp, + const struct ltq_pinmux_info *info, + unsigned mux) +{ + int i, pin, ret = 0; + for (i = 0; i < grp->npins; i++) { + pin = match_mfp(info, grp->pins[i]); + if (pin < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", + grp->pins[i]); + return -EINVAL; + } + ret = match_mux(&info->mfp[pin], mux); + if (ret < 0) { + dev_err(info->dev, "Can't find mux %d on pin%d\n", + mux, pin); + break; + } + } + return ret; +} + +static int ltq_pmx_enable(struct pinctrl_dev *pctrldev, + unsigned func, + unsigned group) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + const struct ltq_pin_group *pin_grp = &info->grps[group]; + int i, pin, pin_func, ret; + + if (!pin_grp->npins || + (match_group_mux(pin_grp, info, pin_grp->mux) < 0)) { + dev_err(info->dev, "Failed to set the pin group: %s\n", + info->grps[group].name); + return -EINVAL; + } + for (i = 0; i < pin_grp->npins; i++) { + pin = match_mfp(info, pin_grp->pins[i]); + if (pin < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", + pin_grp->pins[i]); + return -EINVAL; + } + pin_func = match_mux(&info->mfp[pin], pin_grp->mux); + ret = info->apply_mux(pctrldev, pin, pin_func); + if (ret) { + dev_err(info->dev, + "failed to apply mux %d for pin %d\n", + pin_func, pin); + return ret; + } + } + return 0; +} + +static void ltq_pmx_disable(struct pinctrl_dev *pctrldev, + unsigned func, + unsigned group) +{ + /* + * Nothing to do here. However, pinconf_check_ops() requires this + * callback to be defined. + */ +} + +static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev, + struct pinctrl_gpio_range *range, + unsigned pin) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int mfp = match_mfp(info, pin + (range->id * 32)); + int pin_func; + + if (mfp < 0) { + dev_err(info->dev, "could not find mfp for pin %d\n", pin); + return -EINVAL; + } + + pin_func = match_mux(&info->mfp[mfp], 0); + if (pin_func < 0) { + dev_err(info->dev, "No GPIO function on pin%d\n", mfp); + return -EINVAL; + } + + return info->apply_mux(pctrldev, mfp, pin_func); +} + +static struct pinmux_ops ltq_pmx_ops = { + .get_functions_count = ltq_pmx_func_count, + .get_function_name = ltq_pmx_func_name, + .get_function_groups = ltq_pmx_get_groups, + .enable = ltq_pmx_enable, + .disable = ltq_pmx_disable, + .gpio_request_enable = ltq_pmx_gpio_request_enable, +}; + +/* + * allow different socs to register with the generic part of the lanti + * pinctrl code + */ +int ltq_pinctrl_register(struct platform_device *pdev, + struct ltq_pinmux_info *info) +{ + struct pinctrl_desc *desc; + + if (!info) + return -EINVAL; + desc = info->desc; + desc->pctlops = <q_pctrl_ops; + desc->pmxops = <q_pmx_ops; + info->dev = &pdev->dev; + + info->pctrl = pinctrl_register(desc, &pdev->dev, info); + if (!info->pctrl) { + dev_err(&pdev->dev, "failed to register LTQ pinmux driver\n"); + return -EINVAL; + } + platform_set_drvdata(pdev, info); + return 0; +} diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h new file mode 100644 index 0000000..4419d32 --- /dev/null +++ b/drivers/pinctrl/pinctrl-lantiq.h @@ -0,0 +1,194 @@ +/* + * linux/drivers/pinctrl/pinctrl-lantiq.h + * based on linux/drivers/pinctrl/pinctrl-pxa3xx.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#ifndef __PINCTRL_LANTIQ_H + +#include <linux/clkdev.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> + +#include "core.h" + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +#define LTQ_MAX_MUX 4 +#define MFPR_FUNC_MASK 0x3 + +#define LTQ_PINCONF_PACK(param, arg) ((param) << 16 | (arg)) +#define LTQ_PINCONF_UNPACK_PARAM(conf) ((conf) >> 16) +#define LTQ_PINCONF_UNPACK_ARG(conf) ((conf) & 0xffff) + +enum ltq_pinconf_param { + LTQ_PINCONF_PARAM_PULL, + LTQ_PINCONF_PARAM_OPEN_DRAIN, + LTQ_PINCONF_PARAM_DRIVE_CURRENT, + LTQ_PINCONF_PARAM_SLEW_RATE, +}; + +struct ltq_cfg_param { + const char *property; + enum ltq_pinconf_param param; +}; + +struct ltq_mfp_pin { + const char *name; + const unsigned int pin; + const unsigned short func[LTQ_MAX_MUX]; +}; + +struct ltq_pin_group { + const char *name; + const unsigned mux; + const unsigned *pins; + const unsigned npins; +}; + +struct ltq_pmx_func { + const char *name; + const char * const *groups; + const unsigned num_groups; +}; + +struct ltq_pinmux_info { + struct device *dev; + struct pinctrl_dev *pctrl; + + /* we need to manage up to 5 pad controllers */ + void __iomem *membase[5]; + + /* the descriptor for the subsystem */ + struct pinctrl_desc *desc; + + /* we expose our pads to the subsystem */ + struct pinctrl_pin_desc *pads; + + /* the number of pads. this varies between socs */ + unsigned int num_pads; + + /* these are our multifunction pins */ + const struct ltq_mfp_pin *mfp; + unsigned int num_mfp; + + /* a number of multifunction pins can be grouped together */ + const struct ltq_pin_group *grps; + unsigned int num_grps; + + /* a mapping between function string and id */ + const struct ltq_pmx_func *funcs; + unsigned int num_funcs; + + /* the pinconf options that we are able to read from the DT */ + const struct ltq_cfg_param *params; + unsigned int num_params; + + /* the pad controller can have a irq mapping */ + const unsigned *exin; + unsigned int num_exin; + + /* we need 5 clocks max */ + struct clk *clk[5]; + + /* soc specific callback used to apply muxing */ + int (*apply_mux)(struct pinctrl_dev *pctrldev, int pin, int mux); +}; + +enum ltq_pin { + GPIO0 = 0, + GPIO1, + GPIO2, + GPIO3, + GPIO4, + GPIO5, + GPIO6, + GPIO7, + GPIO8, + GPIO9, + GPIO10, /* 10 */ + GPIO11, + GPIO12, + GPIO13, + GPIO14, + GPIO15, + GPIO16, + GPIO17, + GPIO18, + GPIO19, + GPIO20, /* 20 */ + GPIO21, + GPIO22, + GPIO23, + GPIO24, + GPIO25, + GPIO26, + GPIO27, + GPIO28, + GPIO29, + GPIO30, /* 30 */ + GPIO31, + GPIO32, + GPIO33, + GPIO34, + GPIO35, + GPIO36, + GPIO37, + GPIO38, + GPIO39, + GPIO40, /* 40 */ + GPIO41, + GPIO42, + GPIO43, + GPIO44, + GPIO45, + GPIO46, + GPIO47, + GPIO48, + GPIO49, + GPIO50, /* 50 */ + GPIO51, + GPIO52, + GPIO53, + GPIO54, + GPIO55, + + GPIO64, + GPIO65, + GPIO66, + GPIO67, + GPIO68, + GPIO69, + GPIO70, + GPIO71, + GPIO72, + GPIO73, + GPIO74, + GPIO75, + GPIO76, + GPIO77, + GPIO78, + GPIO79, + GPIO80, + GPIO81, + GPIO82, + GPIO83, + GPIO84, + GPIO85, + GPIO86, + GPIO87, + GPIO88, +}; + +extern int ltq_pinctrl_register(struct platform_device *pdev, + struct ltq_pinmux_info *info); +extern int ltq_pinctrl_unregister(struct platform_device *pdev); +#endif /* __PINCTRL_PXA3XX_H */ diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c new file mode 100644 index 0000000..f8d917d --- /dev/null +++ b/drivers/pinctrl/pinctrl-xway.c @@ -0,0 +1,781 @@ +/* + * linux/drivers/pinctrl/pinmux-xway.c + * based on linux/drivers/pinctrl/pinmux-pxa910.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#include "pinctrl-lantiq.h" + +#include <lantiq_soc.h> + +/* we have 3 1/2 banks of 16 bit each */ +#define PINS 16 +#define PORT3 3 +#define PORT(x) (x / PINS) +#define PORT_PIN(x) (x % PINS) + +/* we have 2 mux bits that can be set for each pin */ +#define MUX_ALT0 0x1 +#define MUX_ALT1 0x2 + +/* + * each bank has this offset apart from the 1/2 bank that is mixed into the + * other 3 ranges + */ +#define REG_OFF 0x30 + +/* these are the offsets to our registers */ +#define GPIO_BASE(p) (REG_OFF * PORT(p)) +#define GPIO_OUT(p) GPIO_BASE(p) +#define GPIO_IN(p) (GPIO_BASE(p) + 0x04) +#define GPIO_DIR(p) (GPIO_BASE(p) + 0x08) +#define GPIO_ALT0(p) (GPIO_BASE(p) + 0x0C) +#define GPIO_ALT1(p) (GPIO_BASE(p) + 0x10) +#define GPIO_OD(p) (GPIO_BASE(p) + 0x14) +#define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c) +#define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20) + +/* the 1/2 port needs special offsets for some registers */ +#define GPIO3_OD (GPIO_BASE(0) + 0x24) +#define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28) +#define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C) +#define GPIO3_ALT1 (GPIO_BASE(PINS) + 0x24) + +/* macros to help us access the registers */ +#define gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & BIT(p))) +#define gpio_setbit(m, r, p) ltq_w32_mask(0, BIT(p), m + r) +#define gpio_clearbit(m, r, p) ltq_w32_mask(BIT(p), 0, m + r) + +#define MFP_XWAY(a, f0, f1, f2, f3) \ + { \ + .name = #a, \ + .pin = a, \ + .func = { \ + XWAY_MUX_##f0, \ + XWAY_MUX_##f1, \ + XWAY_MUX_##f2, \ + XWAY_MUX_##f3, \ + }, \ + } + +#define GRP_MUX(a, m, p) \ + { .name = a, .mux = XWAY_MUX_##m, .pins = p, .npins = ARRAY_SIZE(p), } + +#define FUNC_MUX(f, m) \ + { .func = f, .mux = XWAY_MUX_##m, } + +#define XWAY_MAX_PIN 32 +#define XR9_MAX_PIN 56 + +enum xway_mux { + XWAY_MUX_GPIO = 0, + XWAY_MUX_SPI, + XWAY_MUX_ASC, + XWAY_MUX_PCI, + XWAY_MUX_CGU, + XWAY_MUX_EBU, + XWAY_MUX_JTAG, + XWAY_MUX_EXIN, + XWAY_MUX_TDM, + XWAY_MUX_STP, + XWAY_MUX_SIN, + XWAY_MUX_GPT, + XWAY_MUX_NMI, + XWAY_MUX_MDIO, + XWAY_MUX_MII, + XWAY_MUX_EPHY, + XWAY_MUX_DFE, + XWAY_MUX_SDIO, + XWAY_MUX_NONE = 0xffff, +}; + +static const struct ltq_mfp_pin xway_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM), + MFP_XWAY(GPIO1, GPIO, EXIN, NONE, NONE), + MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE), + MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI), + MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC), + MFP_XWAY(GPIO5, GPIO, STP, NONE, NONE), + MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), + MFP_XWAY(GPIO7, GPIO, CGU, PCI, NONE), + MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), + MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN), + MFP_XWAY(GPIO10, GPIO, ASC, SPI, NONE), + MFP_XWAY(GPIO11, GPIO, ASC, PCI, SPI), + MFP_XWAY(GPIO12, GPIO, ASC, NONE, NONE), + MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), + MFP_XWAY(GPIO14, GPIO, CGU, PCI, NONE), + MFP_XWAY(GPIO15, GPIO, SPI, JTAG, NONE), + MFP_XWAY(GPIO16, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO17, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO18, GPIO, SPI, NONE, JTAG), + MFP_XWAY(GPIO19, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO20, GPIO, JTAG, NONE, NONE), + MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), + MFP_XWAY(GPIO22, GPIO, SPI, NONE, NONE), + MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), + MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), + MFP_XWAY(GPIO25, GPIO, TDM, NONE, ASC), + MFP_XWAY(GPIO26, GPIO, EBU, NONE, TDM), + MFP_XWAY(GPIO27, GPIO, TDM, NONE, ASC), + MFP_XWAY(GPIO28, GPIO, GPT, NONE, NONE), + MFP_XWAY(GPIO29, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO30, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), + MFP_XWAY(GPIO32, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO33, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO34, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO35, GPIO, NONE, NONE, EBU), + MFP_XWAY(GPIO36, GPIO, SIN, NONE, EBU), + MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE), + MFP_XWAY(GPIO39, GPIO, EXIN, NONE, NONE), + MFP_XWAY(GPIO40, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO44, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO45, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), + MFP_XWAY(GPIO47, GPIO, NONE, NONE, SIN), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), +}; + +static const struct ltq_mfp_pin ase_mfp[] = { + /* pin f0 f1 f2 f3 */ + MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), + MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), + MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), + MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), + MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), + MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), + MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), + MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), + MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), + MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), + MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), + MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), + MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII), + MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), + MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), + MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII), + MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), + MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), + MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), +}; + +static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35}; +static const unsigned pins_asc0[] = {GPIO11, GPIO12}; +static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10}; +static const unsigned pins_stp[] = {GPIO4, GPIO5, GPIO6}; +static const unsigned pins_nmi[] = {GPIO8}; +static const unsigned pins_mdio[] = {GPIO42, GPIO43}; + +static const unsigned pins_ebu_a24[] = {GPIO13}; +static const unsigned pins_ebu_clk[] = {GPIO21}; +static const unsigned pins_ebu_cs1[] = {GPIO23}; +static const unsigned pins_ebu_a23[] = {GPIO24}; +static const unsigned pins_ebu_wait[] = {GPIO26}; +static const unsigned pins_ebu_a25[] = {GPIO31}; +static const unsigned pins_ebu_rdy[] = {GPIO48}; +static const unsigned pins_ebu_rd[] = {GPIO49}; + +static const unsigned pins_nand_ale[] = {GPIO13}; +static const unsigned pins_nand_cs1[] = {GPIO23}; +static const unsigned pins_nand_cle[] = {GPIO24}; +static const unsigned pins_nand_rdy[] = {GPIO48}; +static const unsigned pins_nand_rd[] = {GPIO49}; + +static const unsigned pins_exin0[] = {GPIO0}; +static const unsigned pins_exin1[] = {GPIO1}; +static const unsigned pins_exin2[] = {GPIO2}; +static const unsigned pins_exin3[] = {GPIO39}; +static const unsigned pins_exin4[] = {GPIO46}; +static const unsigned pins_exin5[] = {GPIO9}; + +static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18}; +static const unsigned pins_spi_cs1[] = {GPIO15}; +static const unsigned pins_spi_cs2[] = {GPIO21}; +static const unsigned pins_spi_cs3[] = {GPIO13}; +static const unsigned pins_spi_cs4[] = {GPIO10}; +static const unsigned pins_spi_cs5[] = {GPIO9}; +static const unsigned pins_spi_cs6[] = {GPIO11}; + +static const unsigned pins_gpt1[] = {GPIO28}; +static const unsigned pins_gpt2[] = {GPIO21}; +static const unsigned pins_gpt3[] = {GPIO6}; + +static const unsigned pins_clkout0[] = {GPIO8}; +static const unsigned pins_clkout1[] = {GPIO7}; +static const unsigned pins_clkout2[] = {GPIO3}; +static const unsigned pins_clkout3[] = {GPIO2}; + +static const unsigned pins_pci_gnt1[] = {GPIO30}; +static const unsigned pins_pci_gnt2[] = {GPIO23}; +static const unsigned pins_pci_gnt3[] = {GPIO19}; +static const unsigned pins_pci_gnt4[] = {GPIO38}; +static const unsigned pins_pci_req1[] = {GPIO29}; +static const unsigned pins_pci_req2[] = {GPIO31}; +static const unsigned pins_pci_req3[] = {GPIO3}; +static const unsigned pins_pci_req4[] = {GPIO37}; + +static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; +static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; +static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; +static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4}; +static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2}; + +static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; +static const unsigned ase_pins_spi_cs1[] = {GPIO7}; +static const unsigned ase_pins_spi_cs2[] = {GPIO15}; +static const unsigned ase_pins_spi_cs3[] = {GPIO14}; + +static const unsigned ase_pins_exin0[] = {GPIO6}; +static const unsigned ase_pins_exin1[] = {GPIO29}; +static const unsigned ase_pins_exin2[] = {GPIO0}; + +static const unsigned ase_pins_gpt1[] = {GPIO5}; +static const unsigned ase_pins_gpt2[] = {GPIO4}; +static const unsigned ase_pins_gpt3[] = {GPIO25}; + +static const struct ltq_pin_group xway_grps[] = { + GRP_MUX("exin0", EXIN, pins_exin0), + GRP_MUX("exin1", EXIN, pins_exin1), + GRP_MUX("exin2", EXIN, pins_exin2), + GRP_MUX("jtag", JTAG, pins_jtag), + GRP_MUX("ebu a23", EBU, pins_ebu_a23), + GRP_MUX("ebu a24", EBU, pins_ebu_a24), + GRP_MUX("ebu a25", EBU, pins_ebu_a25), + GRP_MUX("ebu clk", EBU, pins_ebu_clk), + GRP_MUX("ebu cs1", EBU, pins_ebu_cs1), + GRP_MUX("ebu wait", EBU, pins_ebu_wait), + GRP_MUX("nand ale", EBU, pins_nand_ale), + GRP_MUX("nand cs1", EBU, pins_nand_cs1), + GRP_MUX("nand cle", EBU, pins_nand_cle), + GRP_MUX("spi", SPI, pins_spi), + GRP_MUX("spi_cs1", SPI, pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, pins_spi_cs3), + GRP_MUX("spi_cs4", SPI, pins_spi_cs4), + GRP_MUX("spi_cs5", SPI, pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, pins_spi_cs6), + GRP_MUX("asc0", ASC, pins_asc0), + GRP_MUX("asc0 cts rts", ASC, pins_asc0_cts_rts), + GRP_MUX("stp", STP, pins_stp), + GRP_MUX("nmi", NMI, pins_nmi), + GRP_MUX("gpt1", GPT, pins_gpt1), + GRP_MUX("gpt2", GPT, pins_gpt2), + GRP_MUX("gpt3", GPT, pins_gpt3), + GRP_MUX("clkout0", CGU, pins_clkout0), + GRP_MUX("clkout1", CGU, pins_clkout1), + GRP_MUX("clkout2", CGU, pins_clkout2), + GRP_MUX("clkout3", CGU, pins_clkout3), + GRP_MUX("gnt1", PCI, pins_pci_gnt1), + GRP_MUX("gnt2", PCI, pins_pci_gnt2), + GRP_MUX("gnt3", PCI, pins_pci_gnt3), + GRP_MUX("req1", PCI, pins_pci_req1), + GRP_MUX("req2", PCI, pins_pci_req2), + GRP_MUX("req3", PCI, pins_pci_req3), +/* xrx only */ + GRP_MUX("nand rdy", EBU, pins_nand_rdy), + GRP_MUX("nand rd", EBU, pins_nand_rd), + GRP_MUX("exin3", EXIN, pins_exin3), + GRP_MUX("exin4", EXIN, pins_exin4), + GRP_MUX("exin5", EXIN, pins_exin5), + GRP_MUX("gnt4", PCI, pins_pci_gnt4), + GRP_MUX("req4", PCI, pins_pci_gnt4), + GRP_MUX("mdio", MDIO, pins_mdio), +}; + +static const struct ltq_pin_group ase_grps[] = { + GRP_MUX("exin0", EXIN, ase_pins_exin0), + GRP_MUX("exin1", EXIN, ase_pins_exin1), + GRP_MUX("exin2", EXIN, ase_pins_exin2), + GRP_MUX("jtag", JTAG, ase_pins_jtag), + GRP_MUX("stp", STP, ase_pins_stp), + GRP_MUX("asc", ASC, ase_pins_asc), + GRP_MUX("gpt1", GPT, ase_pins_gpt1), + GRP_MUX("gpt2", GPT, ase_pins_gpt2), + GRP_MUX("gpt3", GPT, ase_pins_gpt3), + GRP_MUX("ephy", EPHY, ase_pins_ephy), + GRP_MUX("dfe", DFE, ase_pins_dfe), + GRP_MUX("spi", SPI, ase_pins_spi), + GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), + GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), + GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), +}; + +static const char * const xway_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "req1", + "req2", "req3"}; +static const char * const xway_spi_grps[] = {"spi", "spi_cs1", + "spi_cs2", "spi_cs3", + "spi_cs4", "spi_cs5", + "spi_cs6"}; +static const char * const xway_cgu_grps[] = {"clkout0", "clkout1", + "clkout2", "clkout3"}; +static const char * const xway_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle"}; +static const char * const xway_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const xway_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const xway_asc_grps[] = {"asc0", "asc0 cts rts"}; +static const char * const xway_jtag_grps[] = {"jtag"}; +static const char * const xway_stp_grps[] = {"stp"}; +static const char * const xway_nmi_grps[] = {"nmi"}; + +/* ar9/vr9/gr9 */ +static const char * const xrx_mdio_grps[] = {"mdio"}; +static const char * const xrx_ebu_grps[] = {"ebu a23", "ebu a24", + "ebu a25", "ebu cs1", + "ebu wait", "ebu clk", + "nand ale", "nand cs1", + "nand cle", "nand rdy", + "nand rd"}; +static const char * const xrx_exin_grps[] = {"exin0", "exin1", "exin2", + "exin3", "exin4", "exin5"}; +static const char * const xrx_pci_grps[] = {"gnt1", "gnt2", + "gnt3", "gnt4", + "req1", "req2", + "req3", "req4"}; + +/* ase */ +static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; +static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; +static const char * const ase_dfe_grps[] = {"dfe"}; +static const char * const ase_ephy_grps[] = {"ephy"}; +static const char * const ase_asc_grps[] = {"asc"}; +static const char * const ase_jtag_grps[] = {"jtag"}; +static const char * const ase_stp_grps[] = {"stp"}; +static const char * const ase_spi_grps[] = {"spi", "spi_cs1", + "spi_cs2", "spi_cs3"}; + +static const struct ltq_pmx_func danube_funcs[] = { + {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, + {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, + {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(xway_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xway_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)}, +}; + +static const struct ltq_pmx_func xrx_funcs[] = { + {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, + {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, + {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, + {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(xrx_exin_grps)}, + {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, + {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, + {"pci", ARRAY_AND_SIZE(xrx_pci_grps)}, + {"ebu", ARRAY_AND_SIZE(xrx_ebu_grps)}, + {"mdio", ARRAY_AND_SIZE(xrx_mdio_grps)}, +}; + +static const struct ltq_pmx_func ase_funcs[] = { + {"spi", ARRAY_AND_SIZE(ase_spi_grps)}, + {"asc", ARRAY_AND_SIZE(ase_asc_grps)}, + {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)}, + {"exin", ARRAY_AND_SIZE(ase_exin_grps)}, + {"stp", ARRAY_AND_SIZE(ase_stp_grps)}, + {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)}, + {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)}, + {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)}, +}; + +/* --------- pinconf related code --------- */ +static int xway_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config); + int port = PORT(pin); + u32 reg; + + switch (param) { + case LTQ_PINCONF_PARAM_OPEN_DRAIN: + if (port == PORT3) + reg = GPIO3_OD; + else + reg = GPIO_OD(port); + *config = LTQ_PINCONF_PACK(param, + !!gpio_getbit(info->membase[0], reg, PORT_PIN(port))); + break; + + case LTQ_PINCONF_PARAM_PULL: + if (port == PORT3) + reg = GPIO3_PUDEN; + else + reg = GPIO_PUDEN(port); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) { + *config = LTQ_PINCONF_PACK(param, 0); + break; + } + + if (port == PORT3) + reg = GPIO3_PUDSEL; + else + reg = GPIO_PUDSEL(port); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) + *config = LTQ_PINCONF_PACK(param, 2); + else + *config = LTQ_PINCONF_PACK(param, 1); + break; + + default: + dev_err(pctldev->dev, "Invalid config param %04x\n", param); + return -ENOTSUPP; + } + return 0; +} + +static int xway_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); + int arg = LTQ_PINCONF_UNPACK_ARG(config); + int port = PORT(pin); + u32 reg; + + switch (param) { + case LTQ_PINCONF_PARAM_OPEN_DRAIN: + if (port == PORT3) + reg = GPIO3_OD; + else + reg = GPIO_OD(port); + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + break; + + case LTQ_PINCONF_PARAM_PULL: + if (port == PORT3) + reg = GPIO3_PUDEN; + else + reg = GPIO_PUDEN(port); + if (arg == 0) { + gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + break; + } + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + + if (port == PORT3) + reg = GPIO3_PUDSEL; + else + reg = GPIO_PUDSEL(port); + if (arg == 1) + gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + else if (arg == 2) + gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + else + dev_err(pctldev->dev, "Invalid pull value %d\n", arg); + break; + + default: + dev_err(pctldev->dev, "Invalid config param %04x\n", param); + return -ENOTSUPP; + } + return 0; +} + +struct pinconf_ops xway_pinconf_ops = { + .pin_config_get = xway_pinconf_get, + .pin_config_set = xway_pinconf_set, +}; + +static struct pinctrl_desc xway_pctrl_desc = { + .owner = THIS_MODULE, + .confops = &xway_pinconf_ops, +}; + +static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, + int pin, int mux) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int port = PORT(pin); + u32 alt1_reg = GPIO_ALT1(pin); + + if (port == PORT3) + alt1_reg = GPIO3_ALT1; + + if (mux & MUX_ALT0) + gpio_setbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin)); + + if (mux & MUX_ALT1) + gpio_setbit(info->membase[0], alt1_reg, PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], alt1_reg, PORT_PIN(pin)); + + return 0; +} + +static const struct ltq_cfg_param xway_cfg_params[] = { + {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, + {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, +}; + +static struct ltq_pinmux_info xway_info = { + .desc = &xway_pctrl_desc, + .apply_mux = xway_mux_apply, + .params = xway_cfg_params, + .num_params = ARRAY_SIZE(xway_cfg_params), +}; + +/* --------- gpio_chip related code --------- */ +static void xway_gpio_set(struct gpio_chip *chip, unsigned int pin, int val) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + if (val) + gpio_setbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin)); +} + +static int xway_gpio_get(struct gpio_chip *chip, unsigned int pin) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + return gpio_getbit(info->membase[0], GPIO_IN(pin), PORT_PIN(pin)); +} + +static int xway_gpio_dir_in(struct gpio_chip *chip, unsigned int pin) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + gpio_clearbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); + + return 0; +} + +static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val) +{ + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + + gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); + xway_gpio_set(chip, pin, val); + + return 0; +} + +static int xway_gpio_req(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + return pinctrl_request_gpio(gpio); +} + +static void xway_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + pinctrl_free_gpio(gpio); +} + +static struct gpio_chip xway_chip = { + .label = "gpio-xway", + .direction_input = xway_gpio_dir_in, + .direction_output = xway_gpio_dir_out, + .get = xway_gpio_get, + .set = xway_gpio_set, + .request = xway_gpio_req, + .free = xway_gpio_free, + .base = -1, +}; + + +/* --------- register the pinctrl layer --------- */ +static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; +static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0}; + +static struct pinctrl_xway_soc { + int pin_count; + const struct ltq_mfp_pin *mfp; + const struct ltq_pin_group *grps; + unsigned int num_grps; + const struct ltq_pmx_func *funcs; + unsigned int num_funcs; + const unsigned *exin; + unsigned int num_exin; +} soc_cfg[] = { + /* legacy xway */ + {XWAY_MAX_PIN, xway_mfp, + xway_grps, ARRAY_SIZE(xway_grps), + danube_funcs, ARRAY_SIZE(danube_funcs), + xway_exin_pin_map, 3}, + /* xway xr9 series */ + {XR9_MAX_PIN, xway_mfp, + xway_grps, ARRAY_SIZE(xway_grps), + xrx_funcs, ARRAY_SIZE(xrx_funcs), + xway_exin_pin_map, 6}, + /* xway ase series */ + {XWAY_MAX_PIN, ase_mfp, + ase_grps, ARRAY_SIZE(ase_grps), + ase_funcs, ARRAY_SIZE(ase_funcs), + ase_exin_pins_map, 3}, +}; + +static struct pinctrl_gpio_range xway_gpio_range = { + .name = "XWAY GPIO", + .gc = &xway_chip, +}; + +static const struct of_device_id xway_match[] = { + { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]}, + { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]}, + { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]}, + {}, +}; +MODULE_DEVICE_TABLE(of, xway_match); + +static int __devinit pinmux_xway_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct pinctrl_xway_soc *xway_soc; + struct resource *res; + int ret, i; + + /* get and remap our register range */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get resource\n"); + return -ENOENT; + } + xway_info.membase[0] = devm_request_and_ioremap(&pdev->dev, res); + if (!xway_info.membase[0]) { + dev_err(&pdev->dev, "Failed to remap resource\n"); + return -ENOMEM; + } + + match = of_match_device(xway_match, &pdev->dev); + if (match) + xway_soc = (const struct pinctrl_xway_soc *) match->data; + else + xway_soc = &soc_cfg[0]; + + /* find out how many pads we have */ + xway_chip.ngpio = xway_soc->pin_count; + + /* load our pad descriptors */ + xway_info.pads = devm_kzalloc(&pdev->dev, + sizeof(struct pinctrl_pin_desc) * xway_chip.ngpio, + GFP_KERNEL); + if (!xway_info.pads) { + dev_err(&pdev->dev, "Failed to allocate pads\n"); + return -ENOMEM; + } + for (i = 0; i < xway_chip.ngpio; i++) { + /* strlen("ioXY") + 1 = 5 */ + char *name = devm_kzalloc(&pdev->dev, 5, GFP_KERNEL); + + if (!name) { + dev_err(&pdev->dev, "Failed to allocate pad name\n"); + return -ENOMEM; + } + snprintf(name, 5, "io%d", i); + xway_info.pads[i].number = GPIO0 + i; + xway_info.pads[i].name = name; + } + xway_pctrl_desc.pins = xway_info.pads; + + /* load the gpio chip */ + xway_chip.dev = &pdev->dev; + of_gpiochip_add(&xway_chip); + ret = gpiochip_add(&xway_chip); + if (ret) { + dev_err(&pdev->dev, "Failed to register gpio chip\n"); + return ret; + } + + /* setup the data needed by pinctrl */ + xway_pctrl_desc.name = dev_name(&pdev->dev); + xway_pctrl_desc.npins = xway_chip.ngpio; + + xway_info.num_pads = xway_chip.ngpio; + xway_info.num_mfp = xway_chip.ngpio; + xway_info.mfp = xway_soc->mfp; + xway_info.grps = xway_soc->grps; + xway_info.num_grps = xway_soc->num_grps; + xway_info.funcs = xway_soc->funcs; + xway_info.num_funcs = xway_soc->num_funcs; + xway_info.exin = xway_soc->exin; + xway_info.num_exin = xway_soc->num_exin; + + /* register with the generic lantiq layer */ + ret = ltq_pinctrl_register(pdev, &xway_info); + if (ret) { + dev_err(&pdev->dev, "Failed to register pinctrl driver\n"); + return ret; + } + + /* finish with registering the gpio range in pinctrl */ + xway_gpio_range.npins = xway_chip.ngpio; + xway_gpio_range.base = xway_chip.base; + pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range); + dev_info(&pdev->dev, "Init done\n"); + return 0; +} + +static struct platform_driver pinmux_xway_driver = { + .probe = pinmux_xway_probe, + .driver = { + .name = "pinctrl-xway", + .owner = THIS_MODULE, + .of_match_table = xway_match, + }, +}; + +static int __init pinmux_xway_init(void) +{ + return platform_driver_register(&pinmux_xway_driver); +} + +core_initcall_sync(pinmux_xway_init); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ecc31a1..8c2ff24 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -237,6 +237,13 @@ config SPI_OC_TINY help This is the driver for OpenCores tiny SPI master controller. +config SPI_OCTEON + tristate "Cavium OCTEON SPI controller" + depends on CPU_CAVIUM_OCTEON + help + SPI host driver for the hardware found on some Cavium OCTEON + SOCs. + config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" depends on ARCH_OMAP1 diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 22fd3a7..c48df47 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o obj-$(CONFIG_SPI_MXS) += spi-mxs.o obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o +obj-$(CONFIG_SPI_OCTEON) += spi-octeon.o obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o diff --git a/drivers/spi/spi-octeon.c b/drivers/spi/spi-octeon.c new file mode 100644 index 0000000..ea8fb2e --- /dev/null +++ b/drivers/spi/spi-octeon.c @@ -0,0 +1,362 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011, 2012 Cavium, Inc. + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-mpi-defs.h> + +#define OCTEON_SPI_CFG 0 +#define OCTEON_SPI_STS 0x08 +#define OCTEON_SPI_TX 0x10 +#define OCTEON_SPI_DAT0 0x80 + +#define OCTEON_SPI_MAX_BYTES 9 + +#define OCTEON_SPI_MAX_CLOCK_HZ 16000000 + +struct octeon_spi { + struct spi_master *my_master; + u64 register_base; + u64 last_cfg; + u64 cs_enax; +}; + +struct octeon_spi_setup { + u32 max_speed_hz; + u8 chip_select; + u8 mode; + u8 bits_per_word; +}; + +static void octeon_spi_wait_ready(struct octeon_spi *p) +{ + union cvmx_mpi_sts mpi_sts; + unsigned int loops = 0; + + do { + if (loops++) + __delay(500); + mpi_sts.u64 = cvmx_read_csr(p->register_base + OCTEON_SPI_STS); + } while (mpi_sts.s.busy); +} + +static int octeon_spi_do_transfer(struct octeon_spi *p, + struct spi_message *msg, + struct spi_transfer *xfer, + bool last_xfer) +{ + union cvmx_mpi_cfg mpi_cfg; + union cvmx_mpi_tx mpi_tx; + unsigned int clkdiv; + unsigned int speed_hz; + int mode; + bool cpha, cpol; + int bits_per_word; + const u8 *tx_buf; + u8 *rx_buf; + int len; + int i; + + struct octeon_spi_setup *msg_setup = spi_get_ctldata(msg->spi); + + speed_hz = msg_setup->max_speed_hz; + mode = msg_setup->mode; + cpha = mode & SPI_CPHA; + cpol = mode & SPI_CPOL; + bits_per_word = msg_setup->bits_per_word; + + if (xfer->speed_hz) + speed_hz = xfer->speed_hz; + if (xfer->bits_per_word) + bits_per_word = xfer->bits_per_word; + + if (speed_hz > OCTEON_SPI_MAX_CLOCK_HZ) + speed_hz = OCTEON_SPI_MAX_CLOCK_HZ; + + clkdiv = octeon_get_io_clock_rate() / (2 * speed_hz); + + mpi_cfg.u64 = 0; + + mpi_cfg.s.clkdiv = clkdiv; + mpi_cfg.s.cshi = (mode & SPI_CS_HIGH) ? 1 : 0; + mpi_cfg.s.lsbfirst = (mode & SPI_LSB_FIRST) ? 1 : 0; + mpi_cfg.s.wireor = (mode & SPI_3WIRE) ? 1 : 0; + mpi_cfg.s.idlelo = cpha != cpol; + mpi_cfg.s.cslate = cpha ? 1 : 0; + mpi_cfg.s.enable = 1; + + if (msg_setup->chip_select < 4) + p->cs_enax |= 1ull << (12 + msg_setup->chip_select); + mpi_cfg.u64 |= p->cs_enax; + + if (mpi_cfg.u64 != p->last_cfg) { + p->last_cfg = mpi_cfg.u64; + cvmx_write_csr(p->register_base + OCTEON_SPI_CFG, mpi_cfg.u64); + } + tx_buf = xfer->tx_buf; + rx_buf = xfer->rx_buf; + len = xfer->len; + while (len > OCTEON_SPI_MAX_BYTES) { + for (i = 0; i < OCTEON_SPI_MAX_BYTES; i++) { + u8 d; + if (tx_buf) + d = *tx_buf++; + else + d = 0; + cvmx_write_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i), d); + } + mpi_tx.u64 = 0; + mpi_tx.s.csid = msg_setup->chip_select; + mpi_tx.s.leavecs = 1; + mpi_tx.s.txnum = tx_buf ? OCTEON_SPI_MAX_BYTES : 0; + mpi_tx.s.totnum = OCTEON_SPI_MAX_BYTES; + cvmx_write_csr(p->register_base + OCTEON_SPI_TX, mpi_tx.u64); + + octeon_spi_wait_ready(p); + if (rx_buf) + for (i = 0; i < OCTEON_SPI_MAX_BYTES; i++) { + u64 v = cvmx_read_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i)); + *rx_buf++ = (u8)v; + } + len -= OCTEON_SPI_MAX_BYTES; + } + + for (i = 0; i < len; i++) { + u8 d; + if (tx_buf) + d = *tx_buf++; + else + d = 0; + cvmx_write_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i), d); + } + + mpi_tx.u64 = 0; + mpi_tx.s.csid = msg_setup->chip_select; + if (last_xfer) + mpi_tx.s.leavecs = xfer->cs_change; + else + mpi_tx.s.leavecs = !xfer->cs_change; + mpi_tx.s.txnum = tx_buf ? len : 0; + mpi_tx.s.totnum = len; + cvmx_write_csr(p->register_base + OCTEON_SPI_TX, mpi_tx.u64); + + octeon_spi_wait_ready(p); + if (rx_buf) + for (i = 0; i < len; i++) { + u64 v = cvmx_read_csr(p->register_base + OCTEON_SPI_DAT0 + (8 * i)); + *rx_buf++ = (u8)v; + } + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + return xfer->len; +} + +static int octeon_spi_validate_bpw(struct spi_device *spi, u32 speed) +{ + switch (speed) { + case 8: + break; + default: + dev_err(&spi->dev, "Error: %d bits per word not supported\n", + speed); + return -EINVAL; + } + return 0; +} + +static int octeon_spi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) +{ + struct octeon_spi *p = spi_master_get_devdata(master); + unsigned int total_len = 0; + int status = 0; + struct spi_transfer *xfer; + + /* + * We better have set the configuration via a call to .setup + * before we get here. + */ + if (spi_get_ctldata(msg->spi) == NULL) { + status = -EINVAL; + goto err; + } + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->bits_per_word) { + status = octeon_spi_validate_bpw(msg->spi, + xfer->bits_per_word); + if (status) + goto err; + } + } + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + bool last_xfer = &xfer->transfer_list == msg->transfers.prev; + int r = octeon_spi_do_transfer(p, msg, xfer, last_xfer); + if (r < 0) { + status = r; + goto err; + } + total_len += r; + } +err: + msg->status = status; + msg->actual_length = total_len; + spi_finalize_current_message(master); + return status; +} + +static struct octeon_spi_setup *octeon_spi_new_setup(struct spi_device *spi) +{ + struct octeon_spi_setup *setup = kzalloc(sizeof(*setup), GFP_KERNEL); + if (!setup) + return NULL; + + setup->max_speed_hz = spi->max_speed_hz; + setup->chip_select = spi->chip_select; + setup->mode = spi->mode; + setup->bits_per_word = spi->bits_per_word; + return setup; +} + +static int octeon_spi_setup(struct spi_device *spi) +{ + int r; + struct octeon_spi_setup *new_setup; + struct octeon_spi_setup *old_setup = spi_get_ctldata(spi); + + r = octeon_spi_validate_bpw(spi, spi->bits_per_word); + if (r) + return r; + + new_setup = octeon_spi_new_setup(spi); + if (!new_setup) + return -ENOMEM; + + spi_set_ctldata(spi, new_setup); + kfree(old_setup); + + return 0; +} + +static void octeon_spi_cleanup(struct spi_device *spi) +{ + struct octeon_spi_setup *old_setup = spi_get_ctldata(spi); + spi_set_ctldata(spi, NULL); + kfree(old_setup); +} + +static int octeon_spi_nop_transfer_hardware(struct spi_master *master) +{ + return 0; +} + +static int __devinit octeon_spi_probe(struct platform_device *pdev) +{ + + struct resource *res_mem; + struct spi_master *master; + struct octeon_spi *p; + int err = -ENOENT; + + master = spi_alloc_master(&pdev->dev, sizeof(struct octeon_spi)); + if (!master) + return -ENOMEM; + p = spi_master_get_devdata(master); + platform_set_drvdata(pdev, p); + p->my_master = master; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (res_mem == NULL) { + dev_err(&pdev->dev, "found no memory resource\n"); + err = -ENXIO; + goto fail; + } + if (!devm_request_mem_region(&pdev->dev, res_mem->start, + resource_size(res_mem), res_mem->name)) { + dev_err(&pdev->dev, "request_mem_region failed\n"); + goto fail; + } + p->register_base = (u64)devm_ioremap(&pdev->dev, res_mem->start, + resource_size(res_mem)); + + /* Dynamic bus numbering */ + master->bus_num = -1; + master->num_chipselect = 4; + master->mode_bits = SPI_CPHA | + SPI_CPOL | + SPI_CS_HIGH | + SPI_LSB_FIRST | + SPI_3WIRE; + + master->setup = octeon_spi_setup; + master->cleanup = octeon_spi_cleanup; + master->prepare_transfer_hardware = octeon_spi_nop_transfer_hardware; + master->transfer_one_message = octeon_spi_transfer_one_message; + master->unprepare_transfer_hardware = octeon_spi_nop_transfer_hardware; + + master->dev.of_node = pdev->dev.of_node; + err = spi_register_master(master); + if (err) { + dev_err(&pdev->dev, "register master failed: %d\n", err); + goto fail; + } + + dev_info(&pdev->dev, "OCTEON SPI bus driver\n"); + + return 0; +fail: + spi_master_put(master); + return err; +} + +static int __devexit octeon_spi_remove(struct platform_device *pdev) +{ + struct octeon_spi *p = platform_get_drvdata(pdev); + u64 register_base = p->register_base; + + spi_unregister_master(p->my_master); + + /* Clear the CSENA* and put everything in a known state. */ + cvmx_write_csr(register_base + OCTEON_SPI_CFG, 0); + + return 0; +} + +static struct of_device_id octeon_spi_match[] = { + { .compatible = "cavium,octeon-3010-spi", }, + {}, +}; +MODULE_DEVICE_TABLE(of, octeon_spi_match); + +static struct platform_driver octeon_spi_driver = { + .driver = { + .name = "spi-octeon", + .owner = THIS_MODULE, + .of_match_table = octeon_spi_match, + }, + .probe = octeon_spi_probe, + .remove = __devexit_p(octeon_spi_remove), +}; + +module_platform_driver(octeon_spi_driver); + +MODULE_DESCRIPTION("Cavium, Inc. OCTEON SPI bus driver"); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index f7c1c8e..565ad16 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -40,7 +40,8 @@ #if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \ && !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \ && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \ - && !defined(CONFIG_MIPS) && !defined(CONFIG_M68K) + && !defined(CONFIG_MIPS) && !defined(CONFIG_M68K) \ + && !defined(CONFIG_XTENSA) static inline void readsl(const void __iomem *addr, void *buf, int len) { insl((unsigned long)addr, buf, len); } static inline void readsw(const void __iomem *addr, void *buf, int len) |