diff options
Diffstat (limited to 'drivers')
1036 files changed, 46122 insertions, 15568 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 6f0459c..d236aef 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -50,6 +50,8 @@ source "drivers/i2c/Kconfig" source "drivers/spi/Kconfig" +source "drivers/hsi/Kconfig" + source "drivers/pps/Kconfig" source "drivers/ptp/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 262b19d..95952c8 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_TARGET_CORE) += target/ obj-$(CONFIG_MTD) += mtd/ obj-$(CONFIG_SPI) += spi/ +obj-y += hsi/ obj-y += net/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 7556913..47768ff 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -384,6 +384,15 @@ config ACPI_CUSTOM_METHOD load additional kernel modules after boot, this feature may be used to override that restriction). +config ACPI_BGRT + tristate "Boottime Graphics Resource Table support" + default n + help + This driver adds support for exposing the ACPI Boottime Graphics + Resource Table, which allows the operating system to obtain + data from the firmware boot splash. It will appear under + /sys/firmware/acpi/bgrt/ . + source "drivers/acpi/apei/Kconfig" endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 1567028..47199e2 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_HED) += hed.o obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o +obj-$(CONFIG_ACPI_BGRT) += bgrt.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o processor_throttling.o diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 0ca208b..793b8cc 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -68,12 +68,14 @@ acpi-y += \ acpi-y += \ hwacpi.o \ + hwesleep.o \ hwgpe.o \ hwpci.o \ hwregs.o \ hwsleep.o \ hwvalid.o \ - hwxface.o + hwxface.o \ + hwxfsleep.o acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h index a44bd42..8a7d51b 100644 --- a/drivers/acpi/acpica/accommon.h +++ b/drivers/acpi/acpica/accommon.h @@ -51,7 +51,6 @@ * * Note: The order of these include files is important. */ -#include "acconfig.h" /* Global configuration constants */ #include "acmacros.h" /* C macros */ #include "aclocal.h" /* Internal data types */ #include "acobject.h" /* ACPI internal object */ diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h deleted file mode 100644 index 1f30af6..0000000 --- a/drivers/acpi/acpica/acconfig.h +++ /dev/null @@ -1,231 +0,0 @@ -/****************************************************************************** - * - * Name: acconfig.h - Global configuration constants - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2012, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef _ACCONFIG_H -#define _ACCONFIG_H - -/****************************************************************************** - * - * Configuration options - * - *****************************************************************************/ - -/* - * ACPI_DEBUG_OUTPUT - This switch enables all the debug facilities of the - * ACPI subsystem. This includes the DEBUG_PRINT output - * statements. When disabled, all DEBUG_PRINT - * statements are compiled out. - * - * ACPI_APPLICATION - Use this switch if the subsystem is going to be run - * at the application level. - * - */ - -/* - * OS name, used for the _OS object. The _OS object is essentially obsolete, - * but there is a large base of ASL/AML code in existing machines that check - * for the string below. The use of this string usually guarantees that - * the ASL will execute down the most tested code path. Also, there is some - * code that will not execute the _OSI method unless _OS matches the string - * below. Therefore, change this string at your own risk. - */ -#define ACPI_OS_NAME "Microsoft Windows NT" - -/* Maximum objects in the various object caches */ - -#define ACPI_MAX_STATE_CACHE_DEPTH 96 /* State objects */ -#define ACPI_MAX_PARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_EXTPARSE_CACHE_DEPTH 96 /* Parse tree objects */ -#define ACPI_MAX_OBJECT_CACHE_DEPTH 96 /* Interpreter operand objects */ -#define ACPI_MAX_NAMESPACE_CACHE_DEPTH 96 /* Namespace objects */ - -/* - * Should the subsystem abort the loading of an ACPI table if the - * table checksum is incorrect? - */ -#define ACPI_CHECKSUM_ABORT FALSE - -/****************************************************************************** - * - * Subsystem Constants - * - *****************************************************************************/ - -/* Version of ACPI supported */ - -#define ACPI_CA_SUPPORT_LEVEL 3 - -/* Maximum count for a semaphore object */ - -#define ACPI_MAX_SEMAPHORE_COUNT 256 - -/* Maximum object reference count (detects object deletion issues) */ - -#define ACPI_MAX_REFERENCE_COUNT 0x1000 - -/* Default page size for use in mapping memory for operation regions */ - -#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ - -/* owner_id tracking. 8 entries allows for 255 owner_ids */ - -#define ACPI_NUM_OWNERID_MASKS 8 - -/* Size of the root table array is increased by this increment */ - -#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4 - -/* Maximum number of While() loop iterations before forced abort */ - -#define ACPI_MAX_LOOP_ITERATIONS 0xFFFF - -/* Maximum sleep allowed via Sleep() operator */ - -#define ACPI_MAX_SLEEP 2000 /* Two seconds */ - -/* Address Range lists are per-space_id (Memory and I/O only) */ - -#define ACPI_ADDRESS_RANGE_MAX 2 - -/****************************************************************************** - * - * ACPI Specification constants (Do not change unless the specification changes) - * - *****************************************************************************/ - -/* Number of distinct GPE register blocks and register width */ - -#define ACPI_MAX_GPE_BLOCKS 2 -#define ACPI_GPE_REGISTER_WIDTH 8 - -/* Method info (in WALK_STATE), containing local variables and argumetns */ - -#define ACPI_METHOD_NUM_LOCALS 8 -#define ACPI_METHOD_MAX_LOCAL 7 - -#define ACPI_METHOD_NUM_ARGS 7 -#define ACPI_METHOD_MAX_ARG 6 - -/* Length of _HID, _UID, _CID, and UUID values */ - -#define ACPI_DEVICE_ID_LENGTH 0x09 -#define ACPI_MAX_CID_LENGTH 48 -#define ACPI_UUID_LENGTH 16 - -/* - * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG - */ -#define ACPI_OBJ_NUM_OPERANDS 8 -#define ACPI_OBJ_MAX_OPERAND 7 - -/* Number of elements in the Result Stack frame, can be an arbitrary value */ - -#define ACPI_RESULTS_FRAME_OBJ_NUM 8 - -/* - * Maximal number of elements the Result Stack can contain, - * it may be an arbitray value not exceeding the types of - * result_size and result_count (now u8). - */ -#define ACPI_RESULTS_OBJ_NUM_MAX 255 - -/* Names within the namespace are 4 bytes long */ - -#define ACPI_NAME_SIZE 4 -#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ -#define ACPI_PATH_SEPARATOR '.' - -/* Sizes for ACPI table headers */ - -#define ACPI_OEM_ID_SIZE 6 -#define ACPI_OEM_TABLE_ID_SIZE 8 - -/* Constants used in searching for the RSDP in low memory */ - -#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */ -#define ACPI_EBDA_PTR_LENGTH 2 -#define ACPI_EBDA_WINDOW_SIZE 1024 -#define ACPI_HI_RSDP_WINDOW_BASE 0x000E0000 /* Physical Address */ -#define ACPI_HI_RSDP_WINDOW_SIZE 0x00020000 -#define ACPI_RSDP_SCAN_STEP 16 - -/* Operation regions */ - -#define ACPI_USER_REGION_BEGIN 0x80 - -/* Maximum space_ids for Operation Regions */ - -#define ACPI_MAX_ADDRESS_SPACE 255 - -/* Array sizes. Used for range checking also */ - -#define ACPI_MAX_MATCH_OPCODE 5 - -/* RSDP checksums */ - -#define ACPI_RSDP_CHECKSUM_LENGTH 20 -#define ACPI_RSDP_XCHECKSUM_LENGTH 36 - -/* SMBus, GSBus and IPMI bidirectional buffer size */ - -#define ACPI_SMBUS_BUFFER_SIZE 34 -#define ACPI_GSBUS_BUFFER_SIZE 34 -#define ACPI_IPMI_BUFFER_SIZE 66 - -/* _sx_d and _sx_w control methods */ - -#define ACPI_NUM_sx_d_METHODS 4 -#define ACPI_NUM_sx_w_METHODS 5 - -/****************************************************************************** - * - * ACPI AML Debugger - * - *****************************************************************************/ - -#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */ - -#define ACPI_DEBUGGER_COMMAND_PROMPT '-' -#define ACPI_DEBUGGER_EXECUTE_PROMPT '%' - -#endif /* _ACCONFIG_H */ diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h index deaa819..5e8abb0 100644 --- a/drivers/acpi/acpica/acdebug.h +++ b/drivers/acpi/acpica/acdebug.h @@ -111,7 +111,7 @@ acpi_status acpi_db_find_name_in_namespace(char *name_arg); void acpi_db_set_scope(char *name); -acpi_status acpi_db_sleep(char *object_arg); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg)) void acpi_db_find_references(char *object_arg); @@ -119,11 +119,13 @@ void acpi_db_display_locks(void); void acpi_db_display_resources(char *object_arg); -void acpi_db_display_gpes(void); +ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void)) void acpi_db_check_integrity(void); -void acpi_db_generate_gpe(char *gpe_arg, char *block_arg); +ACPI_HW_DEPENDENT_RETURN_VOID(void + acpi_db_generate_gpe(char *gpe_arg, + char *block_arg)) void acpi_db_check_predefined_names(void); diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index c53caa5..d700f63 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -69,11 +69,10 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node, */ acpi_status acpi_ev_init_global_lock_handler(void); -acpi_status acpi_ev_acquire_global_lock(u16 timeout); - -acpi_status acpi_ev_release_global_lock(void); - -acpi_status acpi_ev_remove_global_lock_handler(void); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status + acpi_ev_acquire_global_lock(u16 timeout)) + ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_ev_release_global_lock(void)) + acpi_status acpi_ev_remove_global_lock_handler(void); /* * evgpe - Low-level GPE support @@ -114,7 +113,9 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block, void *context); -acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block); +ACPI_HW_DEPENDENT_RETURN_OK(acpi_status + acpi_ev_delete_gpe_block(struct acpi_gpe_block_info + *gpe_block)) u32 acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, @@ -126,9 +127,10 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, */ acpi_status acpi_ev_gpe_initialize(void); -void acpi_ev_update_gpes(acpi_owner_id table_owner_id); +ACPI_HW_DEPENDENT_RETURN_VOID(void + acpi_ev_update_gpes(acpi_owner_id table_owner_id)) -acpi_status + acpi_status acpi_ev_match_gpe_method(acpi_handle obj_handle, u32 level, void *context, void **return_value); @@ -237,6 +239,5 @@ acpi_status acpi_ev_remove_sci_handler(void); u32 acpi_ev_initialize_sCI(u32 program_sCI); -void acpi_ev_terminate(void); - +ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void)) #endif /* __ACEVENTS_H__ */ diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 2853f76..4f7d3f5 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -147,7 +147,7 @@ u8 acpi_gbl_system_awake_and_running; */ u8 acpi_gbl_reduced_hardware; -#endif +#endif /* DEFINE_ACPI_GLOBALS */ /* Do not disassemble buffers to resource descriptors */ @@ -184,8 +184,12 @@ ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer; * found in the RSDT/XSDT. */ ACPI_EXTERN struct acpi_table_list acpi_gbl_root_table_list; + +#if (!ACPI_REDUCED_HARDWARE) ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS; +#endif /* !ACPI_REDUCED_HARDWARE */ + /* These addresses are calculated from the FADT Event Block addresses */ ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status; @@ -397,10 +401,15 @@ ACPI_EXTERN struct acpi_fixed_event_handler ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head; ACPI_EXTERN struct acpi_gpe_block_info *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS]; + +#if (!ACPI_REDUCED_HARDWARE) + ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized; ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler; ACPI_EXTERN void *acpi_gbl_global_event_handler_context; +#endif /* !ACPI_REDUCED_HARDWARE */ + /***************************************************************************** * * Debugger globals diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 677793e..5ccb99a 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -81,6 +81,26 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value); acpi_status acpi_hw_clear_acpi_status(void); /* + * hwsleep - sleep/wake support (Legacy sleep registers) + */ +acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags); + +/* + * hwesleep - sleep/wake support (Extended FADT-V5 sleep registers) + */ +void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument); + +acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags); + +acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags); + +/* * hwvalid - Port I/O with validation */ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width); @@ -128,16 +148,4 @@ acpi_status acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id, acpi_handle root_pci_device, acpi_handle pci_region); -#ifdef ACPI_FUTURE_USAGE -/* - * hwtimer - ACPI Timer prototypes - */ -acpi_status acpi_get_timer_resolution(u32 * resolution); - -acpi_status acpi_get_timer(u32 * ticks); - -acpi_status -acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed); -#endif /* ACPI_FUTURE_USAGE */ - #endif /* __ACHWARE_H__ */ diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 3f24068..e3922ca 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -370,6 +370,7 @@ struct acpi_predefined_data { /* Defines for Flags field above */ #define ACPI_OBJECT_REPAIRED 1 +#define ACPI_OBJECT_WRAPPED 2 /* * Bitmapped return value types diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index ef338a9..f119f47 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -516,6 +516,12 @@ #endif /* ACPI_DEBUG_OUTPUT */ +#if (!ACPI_REDUCED_HARDWARE) +#define ACPI_HW_OPTIONAL_FUNCTION(addr) addr +#else +#define ACPI_HW_OPTIONAL_FUNCTION(addr) NULL +#endif + /* * Some code only gets executed when the debugger is built in. * Note that this is entirely independent of whether the diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index 2c9e0f0..9b19d4b 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -283,8 +283,9 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, union acpi_operand_object **return_object_ptr); acpi_status -acpi_ns_repair_package_list(struct acpi_predefined_data *data, - union acpi_operand_object **obj_desc_ptr); +acpi_ns_wrap_with_package(struct acpi_predefined_data *data, + union acpi_operand_object *original_object, + union acpi_operand_object **obj_desc_ptr); acpi_status acpi_ns_repair_null_element(struct acpi_predefined_data *data, diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h index d5bec30..6712965 100644 --- a/drivers/acpi/acpica/actables.h +++ b/drivers/acpi/acpica/actables.h @@ -67,6 +67,11 @@ acpi_status acpi_tb_resize_root_table_list(void); acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc); +struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header + *table_header, + struct acpi_table_desc + *table_desc); + acpi_status acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index); diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index 6729ebe..07e4dc4 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -47,7 +47,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evevent") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_ev_fixed_event_initialize(void); @@ -291,3 +291,5 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event) return ((acpi_gbl_fixed_event_handlers[event]. handler) (acpi_gbl_fixed_event_handlers[event].context)); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c index 5e5683c..cfeab38 100644 --- a/drivers/acpi/acpica/evglock.c +++ b/drivers/acpi/acpica/evglock.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evglock") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static u32 acpi_ev_global_lock_handler(void *context); @@ -339,3 +339,5 @@ acpi_status acpi_ev_release_global_lock(void) acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex); return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 9e88cb6..8ba0e5f 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpe") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context); @@ -766,3 +766,5 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, return_UINT32(ACPI_INTERRUPT_HANDLED); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index be75339..23a3ca8 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeblk") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block, @@ -504,3 +504,5 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index adf7494..da0add8 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeinit") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* * Note: History of _PRW support in ACPICA * @@ -440,3 +440,5 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, name, gpe_number)); return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c index 2507393..3c43796 100644 --- a/drivers/acpi/acpica/evgpeutil.c +++ b/drivers/acpi/acpica/evgpeutil.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeutil") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_ev_walk_gpe_list @@ -374,3 +375,5 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, return_ACPI_STATUS(AE_OK); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 84966f4..51ef9f5 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -108,27 +108,30 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, ACPI_FUNCTION_NAME(ev_queue_notify_request); /* - * For value 3 (Ejection Request), some device method may need to be run. - * For value 2 (Device Wake) if _PRW exists, the _PS0 method may need - * to be run. + * For value 0x03 (Ejection Request), may need to run a device method. + * For value 0x02 (Device Wake), if _PRW exists, may need to run + * the _PS0 method. * For value 0x80 (Status Change) on the power button or sleep button, - * initiate soft-off or sleep operation? + * initiate soft-off or sleep operation. + * + * For all cases, simply dispatch the notify to the handler. */ ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Dispatching Notify on [%4.4s] Node %p Value 0x%2.2X (%s)\n", - acpi_ut_get_node_name(node), node, notify_value, - acpi_ut_get_notify_name(notify_value))); + "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n", + acpi_ut_get_node_name(node), + acpi_ut_get_type_name(node->type), notify_value, + acpi_ut_get_notify_name(notify_value), node)); /* Get the notify object attached to the NS Node */ obj_desc = acpi_ns_get_attached_object(node); if (obj_desc) { - /* We have the notify object, Get the right handler */ + /* We have the notify object, Get the correct handler */ switch (node->type) { - /* Notify allowed only on these types */ + /* Notify is allowed only on these types */ case ACPI_TYPE_DEVICE: case ACPI_TYPE_THERMAL: @@ -152,7 +155,7 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node, } /* - * If there is any handler to run, schedule the dispatcher. + * If there is a handler to run, schedule the dispatcher. * Check for: * 1) Global system notify handler * 2) Global device notify handler @@ -270,6 +273,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) acpi_ut_delete_generic_state(notify_info); } +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * * FUNCTION: acpi_ev_terminate @@ -338,3 +342,5 @@ void acpi_ev_terminate(void) } return_VOID; } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c index 26065c6..6a57aa2 100644 --- a/drivers/acpi/acpica/evsci.c +++ b/drivers/acpi/acpica/evsci.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evsci") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context); @@ -181,3 +181,5 @@ acpi_status acpi_ev_remove_sci_handler(void) return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 61944e8..44bef57 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -51,222 +51,6 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxface") -/******************************************************************************* - * - * FUNCTION: acpi_install_exception_handler - * - * PARAMETERS: Handler - Pointer to the handler function for the - * event - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function - * - ******************************************************************************/ -#ifdef ACPI_FUTURE_USAGE -acpi_status acpi_install_exception_handler(acpi_exception_handler handler) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_exception_handler); - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (acpi_gbl_exception_handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - /* Install the handler */ - - acpi_gbl_exception_handler = handler; - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) -#endif /* ACPI_FUTURE_USAGE */ - -/******************************************************************************* - * - * FUNCTION: acpi_install_global_event_handler - * - * PARAMETERS: Handler - Pointer to the global event handler function - * Context - Value passed to the handler on each event - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function. The global handler - * is invoked upon each incoming GPE and Fixed Event. It is - * invoked at interrupt level at the time of the event dispatch. - * Can be used to update event counters, etc. - * - ******************************************************************************/ -acpi_status -acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); - - /* Parameter validation */ - - if (!handler) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (acpi_gbl_global_event_handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - acpi_gbl_global_event_handler = handler; - acpi_gbl_global_event_handler_context = context; - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) - -/******************************************************************************* - * - * FUNCTION: acpi_install_fixed_event_handler - * - * PARAMETERS: Event - Event type to enable. - * Handler - Pointer to the handler function for the - * event - * Context - Value passed to the handler on each GPE - * - * RETURN: Status - * - * DESCRIPTION: Saves the pointer to the handler function and then enables the - * event. - * - ******************************************************************************/ -acpi_status -acpi_install_fixed_event_handler(u32 event, - acpi_event_handler handler, void *context) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); - - /* Parameter validation */ - - if (event > ACPI_EVENT_MAX) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Don't allow two handlers. */ - - if (NULL != acpi_gbl_fixed_event_handlers[event].handler) { - status = AE_ALREADY_EXISTS; - goto cleanup; - } - - /* Install the handler before enabling the event */ - - acpi_gbl_fixed_event_handlers[event].handler = handler; - acpi_gbl_fixed_event_handlers[event].context = context; - - status = acpi_clear_event(event); - if (ACPI_SUCCESS(status)) - status = acpi_enable_event(event, 0); - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X", - event)); - - /* Remove the handler */ - - acpi_gbl_fixed_event_handlers[event].handler = NULL; - acpi_gbl_fixed_event_handlers[event].context = NULL; - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Enabled fixed event %X, Handler=%p\n", event, - handler)); - } - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) - -/******************************************************************************* - * - * FUNCTION: acpi_remove_fixed_event_handler - * - * PARAMETERS: Event - Event type to disable. - * Handler - Address of the handler - * - * RETURN: Status - * - * DESCRIPTION: Disables the event and unregisters the event handler. - * - ******************************************************************************/ -acpi_status -acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) -{ - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); - - /* Parameter validation */ - - if (event > ACPI_EVENT_MAX) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Disable the event before removing the handler */ - - status = acpi_disable_event(event, 0); - - /* Always Remove the handler */ - - acpi_gbl_fixed_event_handlers[event].handler = NULL; - acpi_gbl_fixed_event_handlers[event].context = NULL; - - if (ACPI_FAILURE(status)) { - ACPI_WARNING((AE_INFO, - "Could not write to fixed event enable register 0x%X", - event)); - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n", - event)); - } - - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) /******************************************************************************* * @@ -334,6 +118,7 @@ acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj, return AE_OK; } + /******************************************************************************* * * FUNCTION: acpi_install_notify_handler @@ -705,6 +490,224 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) /******************************************************************************* * + * FUNCTION: acpi_install_exception_handler + * + * PARAMETERS: Handler - Pointer to the handler function for the + * event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function + * + ******************************************************************************/ +#ifdef ACPI_FUTURE_USAGE +acpi_status acpi_install_exception_handler(acpi_exception_handler handler) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_exception_handler); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_exception_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + /* Install the handler */ + + acpi_gbl_exception_handler = handler; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) +#endif /* ACPI_FUTURE_USAGE */ + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_install_global_event_handler + * + * PARAMETERS: Handler - Pointer to the global event handler function + * Context - Value passed to the handler on each event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function. The global handler + * is invoked upon each incoming GPE and Fixed Event. It is + * invoked at interrupt level at the time of the event dispatch. + * Can be used to update event counters, etc. + * + ******************************************************************************/ +acpi_status +acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); + + /* Parameter validation */ + + if (!handler) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_global_event_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + acpi_gbl_global_event_handler = handler; + acpi_gbl_global_event_handler_context = context; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_install_fixed_event_handler + * + * PARAMETERS: Event - Event type to enable. + * Handler - Pointer to the handler function for the + * event + * Context - Value passed to the handler on each GPE + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function and then enables the + * event. + * + ******************************************************************************/ +acpi_status +acpi_install_fixed_event_handler(u32 event, + acpi_event_handler handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler); + + /* Parameter validation */ + + if (event > ACPI_EVENT_MAX) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (NULL != acpi_gbl_fixed_event_handlers[event].handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + /* Install the handler before enabling the event */ + + acpi_gbl_fixed_event_handlers[event].handler = handler; + acpi_gbl_fixed_event_handlers[event].context = context; + + status = acpi_clear_event(event); + if (ACPI_SUCCESS(status)) + status = acpi_enable_event(event, 0); + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X", + event)); + + /* Remove the handler */ + + acpi_gbl_fixed_event_handlers[event].handler = NULL; + acpi_gbl_fixed_event_handlers[event].context = NULL; + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Enabled fixed event %X, Handler=%p\n", event, + handler)); + } + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler) + +/******************************************************************************* + * + * FUNCTION: acpi_remove_fixed_event_handler + * + * PARAMETERS: Event - Event type to disable. + * Handler - Address of the handler + * + * RETURN: Status + * + * DESCRIPTION: Disables the event and unregisters the event handler. + * + ******************************************************************************/ +acpi_status +acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler) +{ + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler); + + /* Parameter validation */ + + if (event > ACPI_EVENT_MAX) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Disable the event before removing the handler */ + + status = acpi_disable_event(event, 0); + + /* Always Remove the handler */ + + acpi_gbl_fixed_event_handlers[event].handler = NULL; + acpi_gbl_fixed_event_handlers[event].context = NULL; + + if (ACPI_FAILURE(status)) { + ACPI_WARNING((AE_INFO, + "Could not write to fixed event enable register 0x%X", + event)); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n", + event)); + } + + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler) + +/******************************************************************************* + * * FUNCTION: acpi_install_gpe_handler * * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT @@ -984,3 +987,4 @@ acpi_status acpi_release_global_lock(u32 handle) } ACPI_EXPORT_SYMBOL(acpi_release_global_lock) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 1768bbe..77cee5a 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -49,6 +49,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfevnt") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * * FUNCTION: acpi_enable @@ -352,3 +353,4 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) } ACPI_EXPORT_SYMBOL(acpi_get_event_status) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 33388fd..86f9b34 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -50,6 +50,7 @@ #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfgpe") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_update_all_gpes @@ -695,3 +696,4 @@ acpi_get_gpe_device(u32 index, acpi_handle *gpe_device) } ACPI_EXPORT_SYMBOL(acpi_get_gpe_device) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index d21ec5f..d0b9ed5 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -48,6 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwacpi") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_hw_set_mode @@ -166,3 +167,5 @@ u32 acpi_hw_get_mode(void) return_UINT32(ACPI_SYS_MODE_LEGACY); } } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c new file mode 100644 index 0000000..29e8592 --- /dev/null +++ b/drivers/acpi/acpica/hwesleep.c @@ -0,0 +1,247 @@ +/****************************************************************************** + * + * Name: hwesleep.c - ACPI Hardware Sleep/Wake Support functions for the + * extended FADT-V5 sleep registers. + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwesleep") + +/******************************************************************************* + * + * FUNCTION: acpi_hw_execute_sleep_method + * + * PARAMETERS: method_pathname - Pathname of method to execute + * integer_argument - Argument to pass to the method + * + * RETURN: None + * + * DESCRIPTION: Execute a sleep/wake related method with one integer argument + * and no return value. + * + ******************************************************************************/ +void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + + ACPI_FUNCTION_TRACE(hw_execute_sleep_method); + + /* One argument, integer_argument; No return value expected */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = (u64)integer_argument; + + status = acpi_evaluate_object(NULL, method_pathname, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "While executing method %s", + method_pathname)); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_sleep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state via the extended FADT sleep + * registers (V5 FADT). + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) +{ + acpi_status status; + u8 sleep_type_value; + u64 sleep_status; + + ACPI_FUNCTION_TRACE(hw_extended_sleep); + + /* Extended sleep registers must be valid */ + + if (!acpi_gbl_FADT.sleep_control.address || + !acpi_gbl_FADT.sleep_status.address) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear wake status (WAK_STS) */ + + status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_gbl_system_awake_and_running = FALSE; + + /* Optionally execute _GTS (Going To Sleep) */ + + if (flags & ACPI_EXECUTE_GTS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); + } + + /* Flush caches, as per ACPI specification */ + + ACPI_FLUSH_CPU_CACHE(); + + /* + * Set the SLP_TYP and SLP_EN bits. + * + * Note: We only use the first value returned by the \_Sx method + * (acpi_gbl_sleep_type_a) - As per ACPI specification. + */ + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "Entering sleep state [S%u]\n", sleep_state)); + + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Wait for transition back to Working State */ + + do { + status = acpi_read(&sleep_status, &acpi_gbl_FADT.sleep_status); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + } while (!(((u8)sleep_status) & ACPI_X_WAKE_STATUS)); + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake_prep + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - ACPI_EXECUTE_BFS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Perform first part of OS-independent ACPI cleanup after + * a sleep. Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) +{ + acpi_status status; + u8 sleep_type_value; + + ACPI_FUNCTION_TRACE(hw_extended_wake_prep); + + status = acpi_get_sleep_type_data(ACPI_STATE_S0, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_SUCCESS(status)) { + sleep_type_value = + ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) & + ACPI_X_SLEEP_TYPE_MASK); + + (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE), + &acpi_gbl_FADT.sleep_control); + } + + /* Optionally execute _BFS (Back From Sleep) */ + + if (flags & ACPI_EXECUTE_BFS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); + } + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_extended_wake + * + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - Reserved, set to zero + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ + +acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags) +{ + ACPI_FUNCTION_TRACE(hw_extended_wake); + + /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ + + acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; + + /* Execute the wake methods */ + + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); + + /* + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. + */ + (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status); + acpi_gbl_system_awake_and_running = TRUE; + + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); + return_ACPI_STATUS(AE_OK); +} diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 1a6894a..25bd28c 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -48,7 +48,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwgpe") - +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static acpi_status acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, @@ -479,3 +479,5 @@ acpi_status acpi_hw_enable_all_wakeup_gpes(void) status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL); return_ACPI_STATUS(status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 4ea4eeb5..6b6c83b 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -51,6 +51,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwregs") +#if (!ACPI_REDUCED_HARDWARE) /* Local Prototypes */ static acpi_status acpi_hw_read_multiple(u32 *value, @@ -62,6 +63,8 @@ acpi_hw_write_multiple(u32 value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b); +#endif /* !ACPI_REDUCED_HARDWARE */ + /****************************************************************************** * * FUNCTION: acpi_hw_validate_register @@ -154,6 +157,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg, acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) { u64 address; + u64 value64; acpi_status status; ACPI_FUNCTION_NAME(hw_read); @@ -175,7 +179,9 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) - address, value, reg->bit_width); + address, &value64, reg->bit_width); + + *value = (u32)value64; } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) @@ -225,7 +231,8 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) - address, value, reg->bit_width); + address, (u64)value, + reg->bit_width); } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) @@ -240,6 +247,7 @@ acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) return (status); } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_hw_clear_acpi_status @@ -285,7 +293,7 @@ exit: /******************************************************************************* * - * FUNCTION: acpi_hw_get_register_bit_mask + * FUNCTION: acpi_hw_get_bit_register_info * * PARAMETERS: register_id - Index of ACPI Register to access * @@ -658,3 +666,5 @@ acpi_hw_write_multiple(u32 value, return (status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 3c4a922..0ed85ca 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -1,7 +1,7 @@ - /****************************************************************************** * - * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface + * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the + * original/legacy sleep/PM registers. * *****************************************************************************/ @@ -43,213 +43,37 @@ */ #include <acpi/acpi.h> +#include <linux/acpi.h> #include "accommon.h" -#include "actables.h" -#include <linux/tboot.h> #include <linux/module.h> #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwsleep") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /******************************************************************************* * - * FUNCTION: acpi_set_firmware_waking_vector - * - * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode - * entry point. - * - * RETURN: Status - * - * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS - * - ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector(u32 physical_address) -{ - ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); - - - /* - * According to the ACPI specification 2.0c and later, the 64-bit - * waking vector should be cleared and the 32-bit waking vector should - * be used, unless we want the wake-up code to be called by the BIOS in - * Protected Mode. Some systems (for example HP dv5-1004nr) are known - * to fail to resume if the 64-bit vector is used. - */ - - /* Set the 32-bit vector */ - - acpi_gbl_FACS->firmware_waking_vector = physical_address; - - /* Clear the 64-bit vector if it exists */ - - if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { - acpi_gbl_FACS->xfirmware_waking_vector = 0; - } - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) - -#if ACPI_MACHINE_WIDTH == 64 -/******************************************************************************* - * - * FUNCTION: acpi_set_firmware_waking_vector64 - * - * PARAMETERS: physical_address - 64-bit physical address of ACPI protected - * mode entry point. - * - * RETURN: Status - * - * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if - * it exists in the table. This function is intended for use with - * 64-bit host operating systems. - * - ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector64(u64 physical_address) -{ - ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); - - - /* Determine if the 64-bit vector actually exists */ - - if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { - return_ACPI_STATUS(AE_NOT_EXIST); - } - - /* Clear 32-bit vector, set the 64-bit X_ vector */ - - acpi_gbl_FACS->firmware_waking_vector = 0; - acpi_gbl_FACS->xfirmware_waking_vector = physical_address; - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) -#endif - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_prep - * - * PARAMETERS: sleep_state - Which sleep state to enter - * - * RETURN: Status - * - * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231) - * This function must execute with interrupts enabled. - * We break sleeping into 2 stages so that OSPM can handle - * various OS-specific tasks between the two steps. - * - ******************************************************************************/ -acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) -{ - acpi_status status; - struct acpi_object_list arg_list; - union acpi_object arg; - - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); - - /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */ - - status = acpi_get_sleep_type_data(sleep_state, - &acpi_gbl_sleep_type_a, - &acpi_gbl_sleep_type_b); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - /* Run the _PTS method */ - - status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } - - /* Setup the argument to _SST */ - - switch (sleep_state) { - case ACPI_STATE_S0: - arg.integer.value = ACPI_SST_WORKING; - break; - - case ACPI_STATE_S1: - case ACPI_STATE_S2: - case ACPI_STATE_S3: - arg.integer.value = ACPI_SST_SLEEPING; - break; - - case ACPI_STATE_S4: - arg.integer.value = ACPI_SST_SLEEP_CONTEXT; - break; - - default: - arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */ - break; - } - - /* - * Set the system indicators to show the desired sleep state. - * _SST is an optional method (return no error if not found) - */ - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, - "While executing method _SST")); - } - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) - -static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state + * FUNCTION: acpi_hw_legacy_sleep * * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * - * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * DESCRIPTION: Enter a system sleep state via the legacy FADT PM registers * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) +acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) { - u32 pm1a_control; - u32 pm1b_control; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; + u32 pm1a_control; + u32 pm1b_control; u32 in_value; - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); - - if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || - (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { - ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", - acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); - return_ACPI_STATUS(AE_AML_OPERAND_VALUE); - } + ACPI_FUNCTION_TRACE(hw_legacy_sleep); sleep_type_reg_info = acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE); @@ -271,6 +95,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } + if (sleep_state != ACPI_STATE_S5) { + /* + * Disable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); + if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { + return_ACPI_STATUS(status); + } + } + /* * 1) Disable/Clear all GPEs * 2) Enable all wakeup GPEs @@ -286,18 +122,10 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } - if (gts) { - /* Execute the _GTS method */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + /* Optionally execute _GTS (Going To Sleep) */ - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } + if (flags & ACPI_EXECUTE_GTS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); } /* Get current value of PM1A control */ @@ -344,8 +172,12 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) ACPI_FLUSH_CPU_CACHE(); - tboot_sleep(sleep_state, pm1a_control, pm1b_control); - + status = acpi_os_prepare_sleep(sleep_state, pm1a_control, + pm1b_control); + if (ACPI_SKIP(status)) + return_ACPI_STATUS(AE_OK); + if (ACPI_FAILURE(status)) + return_ACPI_STATUS(status); /* Write #2: Write both SLP_TYP + SLP_EN */ status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control); @@ -375,114 +207,44 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) } } - /* Wait until we enter sleep state */ - - do { - status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, - &in_value); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Spin until we wake */ - - } while (!in_value); - - return_ACPI_STATUS(AE_OK); -} - -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_s4bios - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Perform a S4 bios request. - * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED - * - ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) -{ - u32 in_value; - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); - - /* Clear the wake status bit (PM1) */ - - status = - acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_clear_acpi_status(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * 1) Disable/Clear all GPEs - * 2) Enable all wakeup GPEs - */ - status = acpi_hw_disable_all_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - acpi_gbl_system_awake_and_running = FALSE; - - status = acpi_hw_enable_all_wakeup_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - ACPI_FLUSH_CPU_CACHE(); - - status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, - (u32) acpi_gbl_FADT.S4bios_request, 8); + /* Wait for transition back to Working State */ do { - acpi_os_stall(1000); status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + } while (!in_value); return_ACPI_STATUS(AE_OK); } -ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) - /******************************************************************************* * - * FUNCTION: acpi_leave_sleep_state_prep + * FUNCTION: acpi_hw_legacy_wake_prep * - * PARAMETERS: sleep_state - Which sleep state we are exiting + * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a * sleep. - * Called with interrupts DISABLED. + * Called with interrupts ENABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) + +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; u32 pm1a_control; u32 pm1b_control; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + ACPI_FUNCTION_TRACE(hw_legacy_wake_prep); /* * Set SLP_TYPE and SLP_EN to state S0. @@ -525,27 +287,20 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) } } - if (bfs) { - /* Execute the _BFS method */ + /* Optionally execute _BFS (Back From Sleep) */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); - } + if (flags & ACPI_EXECUTE_BFS) { + acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); } return_ACPI_STATUS(status); } /******************************************************************************* * - * FUNCTION: acpi_leave_sleep_state + * FUNCTION: acpi_hw_legacy_wake * * PARAMETERS: sleep_state - Which sleep state we just exited + * Flags - Reserved, set to zero * * RETURN: Status * @@ -553,31 +308,17 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) * Called with interrupts ENABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state(u8 sleep_state) + +acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags) { - struct acpi_object_list arg_list; - union acpi_object arg; acpi_status status; - ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + ACPI_FUNCTION_TRACE(hw_legacy_wake); /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - - /* Ignore any errors from these methods */ - - arg.integer.value = ACPI_SST_WAKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); - } + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING); /* * GPEs must be enabled before _WAK is called as GPEs @@ -591,46 +332,50 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } + status = acpi_hw_enable_all_runtime_gpes(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } - arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK")); - } - /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ + /* + * Now we can execute _WAK, etc. Some machines require that the GPEs + * are enabled before the wake methods are executed. + */ + acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state); /* - * Some BIOSes assume that WAK_STS will be cleared on resume and use - * it to determine whether the system is rebooting or resuming. Clear - * it for compatibility. + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. */ acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 1); - acpi_gbl_system_awake_and_running = TRUE; /* Enable power button */ (void) acpi_write_bit_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON]. - enable_register_id, ACPI_ENABLE_EVENT); + [ACPI_EVENT_POWER_BUTTON]. + enable_register_id, ACPI_ENABLE_EVENT); (void) acpi_write_bit_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON]. - status_register_id, ACPI_CLEAR_STATUS); + [ACPI_EVENT_POWER_BUTTON]. + status_register_id, ACPI_CLEAR_STATUS); - arg.integer.value = ACPI_SST_WORKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _SST")); + /* + * Enable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); + if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) { + return_ACPI_STATUS(status); } + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING); return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index d4973d9..f1b2c3b 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -49,6 +49,7 @@ #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwtimer") +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /****************************************************************************** * * FUNCTION: acpi_get_timer_resolution @@ -187,3 +188,4 @@ acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed) } ACPI_EXPORT_SYMBOL(acpi_get_timer_duration) +#endif /* !ACPI_REDUCED_HARDWARE */ diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 9d38eb6..ab513a9 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -74,8 +74,7 @@ acpi_status acpi_reset(void) /* Check if the reset register is supported */ - if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || - !reset_reg->address) { + if (!reset_reg->address) { return_ACPI_STATUS(AE_NOT_EXIST); } @@ -138,11 +137,6 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) return (status); } - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - /* Initialize entire 64-bit return value to zero */ *return_value = 0; @@ -154,24 +148,17 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg) */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_read_memory((acpi_physical_address) - address, &value, width); + address, return_value, + reg->bit_width); if (ACPI_FAILURE(status)) { return (status); } - *return_value = value; - - if (reg->bit_width == 64) { - - /* Read the top 32 bits */ + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - status = acpi_os_read_memory((acpi_physical_address) - (address + 4), &value, 32); - if (ACPI_FAILURE(status)) { - return (status); - } - *return_value |= ((u64)value << 32); + width = reg->bit_width; + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_read_port((acpi_io_address) address, &value, width); @@ -231,32 +218,22 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) return (status); } - width = reg->bit_width; - if (width == 64) { - width = 32; /* Break into two 32-bit transfers */ - } - /* * Two address spaces supported: Memory or IO. PCI_Config is * not supported here because the GAS structure is insufficient */ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { status = acpi_os_write_memory((acpi_physical_address) - address, ACPI_LODWORD(value), - width); + address, value, reg->bit_width); if (ACPI_FAILURE(status)) { return (status); } + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ - if (reg->bit_width == 64) { - status = acpi_os_write_memory((acpi_physical_address) - (address + 4), - ACPI_HIDWORD(value), 32); - if (ACPI_FAILURE(status)) { - return (status); - } + width = reg->bit_width; + if (width == 64) { + width = 32; /* Break into two 32-bit transfers */ } - } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ status = acpi_hw_write_port((acpi_io_address) address, ACPI_LODWORD(value), @@ -286,6 +263,7 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg) ACPI_EXPORT_SYMBOL(acpi_write) +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_read_bit_register @@ -453,7 +431,7 @@ unlock_and_exit: } ACPI_EXPORT_SYMBOL(acpi_write_bit_register) - +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * * FUNCTION: acpi_get_sleep_type_data diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c new file mode 100644 index 0000000..762d059 --- /dev/null +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -0,0 +1,431 @@ +/****************************************************************************** + * + * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include <linux/module.h> + +#define _COMPONENT ACPI_HARDWARE +ACPI_MODULE_NAME("hwxfsleep") + +/* Local prototypes */ +static acpi_status +acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id); + +/* + * Dispatch table used to efficiently branch to the various sleep + * functions. + */ +#define ACPI_SLEEP_FUNCTION_ID 0 +#define ACPI_WAKE_PREP_FUNCTION_ID 1 +#define ACPI_WAKE_FUNCTION_ID 2 + +/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */ + +static struct acpi_sleep_functions acpi_sleep_dispatch[] = { + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep), + acpi_hw_extended_sleep}, + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep), + acpi_hw_extended_wake_prep}, + {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake} +}; + +/* + * These functions are removed for the ACPI_REDUCED_HARDWARE case: + * acpi_set_firmware_waking_vector + * acpi_set_firmware_waking_vector64 + * acpi_enter_sleep_state_s4bios + */ + +#if (!ACPI_REDUCED_HARDWARE) +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector + * + * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode + * entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS + * + ******************************************************************************/ + +acpi_status acpi_set_firmware_waking_vector(u32 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); + + + /* + * According to the ACPI specification 2.0c and later, the 64-bit + * waking vector should be cleared and the 32-bit waking vector should + * be used, unless we want the wake-up code to be called by the BIOS in + * Protected Mode. Some systems (for example HP dv5-1004nr) are known + * to fail to resume if the 64-bit vector is used. + */ + + /* Set the 32-bit vector */ + + acpi_gbl_FACS->firmware_waking_vector = physical_address; + + /* Clear the 64-bit vector if it exists */ + + if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) { + acpi_gbl_FACS->xfirmware_waking_vector = 0; + } + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) + +#if ACPI_MACHINE_WIDTH == 64 +/******************************************************************************* + * + * FUNCTION: acpi_set_firmware_waking_vector64 + * + * PARAMETERS: physical_address - 64-bit physical address of ACPI protected + * mode entry point. + * + * RETURN: Status + * + * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if + * it exists in the table. This function is intended for use with + * 64-bit host operating systems. + * + ******************************************************************************/ +acpi_status acpi_set_firmware_waking_vector64(u64 physical_address) +{ + ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64); + + + /* Determine if the 64-bit vector actually exists */ + + if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Clear 32-bit vector, set the 64-bit X_ vector */ + + acpi_gbl_FACS->firmware_waking_vector = 0; + acpi_gbl_FACS->xfirmware_waking_vector = physical_address; + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64) +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_s4bios + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Perform a S4 bios request. + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) +{ + u32 in_value; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); + + /* Clear the wake status bit (PM1) */ + + status = + acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_clear_acpi_status(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * 1) Disable/Clear all GPEs + * 2) Enable all wakeup GPEs + */ + status = acpi_hw_disable_all_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + acpi_gbl_system_awake_and_running = FALSE; + + status = acpi_hw_enable_all_wakeup_gpes(); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + ACPI_FLUSH_CPU_CACHE(); + + status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, + (u32)acpi_gbl_FADT.S4bios_request, 8); + + do { + acpi_os_stall(1000); + status = + acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } while (!in_value); + + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) +#endif /* !ACPI_REDUCED_HARDWARE */ +/******************************************************************************* + * + * FUNCTION: acpi_hw_sleep_dispatch + * + * PARAMETERS: sleep_state - Which sleep state to enter/exit + * function_id - Sleep, wake_prep, or Wake + * + * RETURN: Status from the invoked sleep handling function. + * + * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling + * function. + * + ******************************************************************************/ +static acpi_status +acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) +{ + acpi_status status; + struct acpi_sleep_functions *sleep_functions = + &acpi_sleep_dispatch[function_id]; + +#if (!ACPI_REDUCED_HARDWARE) + + /* + * If the Hardware Reduced flag is set (from the FADT), we must + * use the extended sleep registers + */ + if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { + status = sleep_functions->extended_function(sleep_state, flags); + } else { + /* Legacy sleep */ + + status = sleep_functions->legacy_function(sleep_state, flags); + } + + return (status); + +#else + /* + * For the case where reduced-hardware-only code is being generated, + * we know that only the extended sleep registers are available + */ + status = sleep_functions->extended_function(sleep_state, flags); + return (status); + +#endif /* !ACPI_REDUCED_HARDWARE */ +} + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Prepare to enter a system sleep state. + * This function must execute with interrupts enabled. + * We break sleeping into 2 stages so that OSPM can handle + * various OS-specific tasks between the two steps. + * + ******************************************************************************/ + +acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) +{ + acpi_status status; + struct acpi_object_list arg_list; + union acpi_object arg; + u32 sst_value; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); + + status = acpi_get_sleep_type_data(sleep_state, + &acpi_gbl_sleep_type_a, + &acpi_gbl_sleep_type_b); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Execute the _PTS method (Prepare To Sleep) */ + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; + + status = + acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } + + /* Setup the argument to the _SST method (System STatus) */ + + switch (sleep_state) { + case ACPI_STATE_S0: + sst_value = ACPI_SST_WORKING; + break; + + case ACPI_STATE_S1: + case ACPI_STATE_S2: + case ACPI_STATE_S3: + sst_value = ACPI_SST_SLEEPING; + break; + + case ACPI_STATE_S4: + sst_value = ACPI_SST_SLEEP_CONTEXT; + break; + + default: + sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */ + break; + } + + /* + * Set the system indicators to show the desired sleep state. + * _SST is an optional method (return no error if not found) + */ + acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value); + return_ACPI_STATUS(AE_OK); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_enter_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state to enter + * Flags - ACPI_EXECUTE_GTS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); + + if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || + (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { + ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", + acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); + return_ACPI_STATUS(AE_AML_OPERAND_VALUE); + } + + status = + acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state_prep + * + * PARAMETERS: sleep_state - Which sleep state we are exiting + * Flags - ACPI_EXECUTE_BFS to run optional method + * + * RETURN: Status + * + * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a + * sleep. + * Called with interrupts DISABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); + + status = + acpi_hw_sleep_dispatch(sleep_state, flags, + ACPI_WAKE_PREP_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep) + +/******************************************************************************* + * + * FUNCTION: acpi_leave_sleep_state + * + * PARAMETERS: sleep_state - Which sleep state we are exiting + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ +acpi_status acpi_leave_sleep_state(u8 sleep_state) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); + + + status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index b7f2b3b..3f7f3f6 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -242,7 +242,20 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, if (!obj_desc) { - /* No attached object, we are done */ + /* No attached object. Some types should always have an object */ + + switch (type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_PACKAGE: + case ACPI_TYPE_BUFFER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_METHOD: + acpi_os_printf("<No attached object>"); + break; + + default: + break; + } acpi_os_printf("\n"); return (AE_OK); diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c index 30ea5bc..3b5acb0 100644 --- a/drivers/acpi/acpica/nsdumpdv.c +++ b/drivers/acpi/acpica/nsdumpdv.c @@ -121,7 +121,7 @@ void acpi_ns_dump_root_devices(void) return; } - status = acpi_get_handle(NULL, ACPI_NS_SYSTEM_BUS, &sys_bus_handle); + status = acpi_get_handle(NULL, METHOD_NAME__SB_, &sys_bus_handle); if (ACPI_FAILURE(status)) { return; } diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index bbe46a4..23ce096 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -638,8 +638,8 @@ acpi_ns_check_package(struct acpi_predefined_data *data, /* Create the new outer package and populate it */ status = - acpi_ns_repair_package_list(data, - return_object_ptr); + acpi_ns_wrap_with_package(data, *elements, + return_object_ptr); if (ACPI_FAILURE(status)) { return (status); } diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 9c35d20..5519a64 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -71,11 +71,10 @@ ACPI_MODULE_NAME("nsrepair") * Buffer -> String * Buffer -> Package of Integers * Package -> Package of one Package + * An incorrect standalone object is wrapped with required outer package * * Additional possible repairs: - * * Required package elements that are NULL replaced by Integer/String/Buffer - * Incorrect standalone package wrapped with required outer package * ******************************************************************************/ /* Local prototypes */ @@ -91,10 +90,6 @@ static acpi_status acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, union acpi_operand_object **return_object); -static acpi_status -acpi_ns_convert_to_package(union acpi_operand_object *original_object, - union acpi_operand_object **return_object); - /******************************************************************************* * * FUNCTION: acpi_ns_repair_object @@ -151,9 +146,24 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, } } if (expected_btypes & ACPI_RTYPE_PACKAGE) { - status = acpi_ns_convert_to_package(return_object, &new_object); + /* + * A package is expected. We will wrap the existing object with a + * new package object. It is often the case that if a variable-length + * package is required, but there is only a single object needed, the + * BIOS will return that object instead of wrapping it with a Package + * object. Note: after the wrapping, the package will be validated + * for correct contents (expected object type or types). + */ + status = + acpi_ns_wrap_with_package(data, return_object, &new_object); if (ACPI_SUCCESS(status)) { - goto object_repaired; + /* + * The original object just had its reference count + * incremented for being inserted into the new package. + */ + *return_object_ptr = new_object; /* New Package object */ + data->flags |= ACPI_OBJECT_REPAIRED; + return (AE_OK); } } @@ -165,22 +175,27 @@ acpi_ns_repair_object(struct acpi_predefined_data *data, /* Object was successfully repaired */ - /* - * If the original object is a package element, we need to: - * 1. Set the reference count of the new object to match the - * reference count of the old object. - * 2. Decrement the reference count of the original object. - */ if (package_index != ACPI_NOT_PACKAGE_ELEMENT) { - new_object->common.reference_count = - return_object->common.reference_count; + /* + * The original object is a package element. We need to + * decrement the reference count of the original object, + * for removing it from the package. + * + * However, if the original object was just wrapped with a + * package object as part of the repair, we don't need to + * change the reference count. + */ + if (!(data->flags & ACPI_OBJECT_WRAPPED)) { + new_object->common.reference_count = + return_object->common.reference_count; - if (return_object->common.reference_count > 1) { - return_object->common.reference_count--; + if (return_object->common.reference_count > 1) { + return_object->common.reference_count--; + } } ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, - "%s: Converted %s to expected %s at index %u\n", + "%s: Converted %s to expected %s at Package index %u\n", data->pathname, acpi_ut_get_object_type_name(return_object), acpi_ut_get_object_type_name(new_object), @@ -453,65 +468,6 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object, /******************************************************************************* * - * FUNCTION: acpi_ns_convert_to_package - * - * PARAMETERS: original_object - Object to be converted - * return_object - Where the new converted object is returned - * - * RETURN: Status. AE_OK if conversion was successful. - * - * DESCRIPTION: Attempt to convert a Buffer object to a Package. Each byte of - * the buffer is converted to a single integer package element. - * - ******************************************************************************/ - -static acpi_status -acpi_ns_convert_to_package(union acpi_operand_object *original_object, - union acpi_operand_object **return_object) -{ - union acpi_operand_object *new_object; - union acpi_operand_object **elements; - u32 length; - u8 *buffer; - - switch (original_object->common.type) { - case ACPI_TYPE_BUFFER: - - /* Buffer-to-Package conversion */ - - length = original_object->buffer.length; - new_object = acpi_ut_create_package_object(length); - if (!new_object) { - return (AE_NO_MEMORY); - } - - /* Convert each buffer byte to an integer package element */ - - elements = new_object->package.elements; - buffer = original_object->buffer.pointer; - - while (length--) { - *elements = - acpi_ut_create_integer_object((u64) *buffer); - if (!*elements) { - acpi_ut_remove_reference(new_object); - return (AE_NO_MEMORY); - } - elements++; - buffer++; - } - break; - - default: - return (AE_AML_OPERAND_TYPE); - } - - *return_object = new_object; - return (AE_OK); -} - -/******************************************************************************* - * * FUNCTION: acpi_ns_repair_null_element * * PARAMETERS: Data - Pointer to validation data structure @@ -677,55 +633,56 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, /******************************************************************************* * - * FUNCTION: acpi_ns_repair_package_list + * FUNCTION: acpi_ns_wrap_with_package * * PARAMETERS: Data - Pointer to validation data structure - * obj_desc_ptr - Pointer to the object to repair. The new - * package object is returned here, - * overwriting the old object. + * original_object - Pointer to the object to repair. + * obj_desc_ptr - The new package object is returned here * * RETURN: Status, new object in *obj_desc_ptr * - * DESCRIPTION: Repair a common problem with objects that are defined to return - * a variable-length Package of Packages. If the variable-length - * is one, some BIOS code mistakenly simply declares a single - * Package instead of a Package with one sub-Package. This - * function attempts to repair this error by wrapping a Package - * object around the original Package, creating the correct - * Package with one sub-Package. + * DESCRIPTION: Repair a common problem with objects that are defined to + * return a variable-length Package of sub-objects. If there is + * only one sub-object, some BIOS code mistakenly simply declares + * the single object instead of a Package with one sub-object. + * This function attempts to repair this error by wrapping a + * Package object around the original object, creating the + * correct and expected Package with one sub-object. * * Names that can be repaired in this manner include: - * _ALR, _CSD, _HPX, _MLS, _PRT, _PSS, _TRT, TSS + * _ALR, _CSD, _HPX, _MLS, _PLD, _PRT, _PSS, _TRT, _TSS, + * _BCL, _DOD, _FIX, _Sx * ******************************************************************************/ acpi_status -acpi_ns_repair_package_list(struct acpi_predefined_data *data, - union acpi_operand_object **obj_desc_ptr) +acpi_ns_wrap_with_package(struct acpi_predefined_data *data, + union acpi_operand_object *original_object, + union acpi_operand_object **obj_desc_ptr) { union acpi_operand_object *pkg_obj_desc; - ACPI_FUNCTION_NAME(ns_repair_package_list); + ACPI_FUNCTION_NAME(ns_wrap_with_package); /* * Create the new outer package and populate it. The new package will - * have a single element, the lone subpackage. + * have a single element, the lone sub-object. */ pkg_obj_desc = acpi_ut_create_package_object(1); if (!pkg_obj_desc) { return (AE_NO_MEMORY); } - pkg_obj_desc->package.elements[0] = *obj_desc_ptr; + pkg_obj_desc->package.elements[0] = original_object; + + ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, + "%s: Wrapped %s with expected Package object\n", + data->pathname, + acpi_ut_get_object_type_name(original_object))); /* Return the new object in the object pointer */ *obj_desc_ptr = pkg_obj_desc; - data->flags |= ACPI_OBJECT_REPAIRED; - - ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, - "%s: Repaired incorrectly formed Package\n", - data->pathname)); - + data->flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED; return (AE_OK); } diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index a535b7a..7511375 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -341,7 +341,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) if (!acpi_ns_valid_path_separator(*external_name) && (*external_name != 0)) { - return_ACPI_STATUS(AE_BAD_PARAMETER); + return_ACPI_STATUS(AE_BAD_PATHNAME); } /* Move on the next segment */ diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index c5d8704..4c9c760 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -363,10 +363,6 @@ static void acpi_tb_convert_fadt(void) u32 address32; u32 i; - /* Update the local FADT table header length */ - - acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); - /* * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary. * Later code will always use the X 64-bit field. Also, check for an @@ -408,6 +404,10 @@ static void acpi_tb_convert_fadt(void) acpi_gbl_FADT.boot_flags = 0; } + /* Update the local FADT table header length */ + + acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt); + /* * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X" * generic address structures as necessary. Later code will always use diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index 1aecf7b..c03500b 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -114,7 +114,6 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) { u32 i; acpi_status status = AE_OK; - struct acpi_table_header *override_table = NULL; ACPI_FUNCTION_TRACE(tb_add_table); @@ -224,25 +223,10 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) /* * ACPI Table Override: * Allow the host to override dynamically loaded tables. + * NOTE: the table is fully mapped at this point, and the mapping will + * be deleted by tb_table_override if the table is actually overridden. */ - status = acpi_os_table_override(table_desc->pointer, &override_table); - if (ACPI_SUCCESS(status) && override_table) { - ACPI_INFO((AE_INFO, - "%4.4s @ 0x%p Table override, replaced with:", - table_desc->pointer->signature, - ACPI_CAST_PTR(void, table_desc->address))); - - /* We can delete the table that was passed as a parameter */ - - acpi_tb_delete_table(table_desc); - - /* Setup descriptor for the new table */ - - table_desc->address = ACPI_PTR_TO_PHYSADDR(override_table); - table_desc->pointer = override_table; - table_desc->length = override_table->length; - table_desc->flags = ACPI_TABLE_ORIGIN_OVERRIDE; - } + (void)acpi_tb_table_override(table_desc->pointer, table_desc); /* Add the table to the global root table list */ @@ -263,6 +247,95 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) /******************************************************************************* * + * FUNCTION: acpi_tb_table_override + * + * PARAMETERS: table_header - Header for the original table + * table_desc - Table descriptor initialized for the + * original table. May or may not be mapped. + * + * RETURN: Pointer to the entire new table. NULL if table not overridden. + * If overridden, installs the new table within the input table + * descriptor. + * + * DESCRIPTION: Attempt table override by calling the OSL override functions. + * Note: If the table is overridden, then the entire new table + * is mapped and returned by this function. + * + ******************************************************************************/ + +struct acpi_table_header *acpi_tb_table_override(struct acpi_table_header + *table_header, + struct acpi_table_desc + *table_desc) +{ + acpi_status status; + struct acpi_table_header *new_table = NULL; + acpi_physical_address new_address = 0; + u32 new_table_length = 0; + u8 new_flags; + char *override_type; + + /* (1) Attempt logical override (returns a logical address) */ + + status = acpi_os_table_override(table_header, &new_table); + if (ACPI_SUCCESS(status) && new_table) { + new_address = ACPI_PTR_TO_PHYSADDR(new_table); + new_table_length = new_table->length; + new_flags = ACPI_TABLE_ORIGIN_OVERRIDE; + override_type = "Logical"; + goto finish_override; + } + + /* (2) Attempt physical override (returns a physical address) */ + + status = acpi_os_physical_table_override(table_header, + &new_address, + &new_table_length); + if (ACPI_SUCCESS(status) && new_address && new_table_length) { + + /* Map the entire new table */ + + new_table = acpi_os_map_memory(new_address, new_table_length); + if (!new_table) { + ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY, + "%4.4s %p Attempted physical table override failed", + table_header->signature, + ACPI_CAST_PTR(void, + table_desc->address))); + return (NULL); + } + + override_type = "Physical"; + new_flags = ACPI_TABLE_ORIGIN_MAPPED; + goto finish_override; + } + + return (NULL); /* There was no override */ + + finish_override: + + ACPI_INFO((AE_INFO, + "%4.4s %p %s table override, new table: %p", + table_header->signature, + ACPI_CAST_PTR(void, table_desc->address), + override_type, new_table)); + + /* We can now unmap/delete the original table (if fully mapped) */ + + acpi_tb_delete_table(table_desc); + + /* Setup descriptor for the new table */ + + table_desc->address = new_address; + table_desc->pointer = new_table; + table_desc->length = new_table_length; + table_desc->flags = new_flags; + + return (new_table); +} + +/******************************************************************************* + * * FUNCTION: acpi_tb_resize_root_table_list * * PARAMETERS: None @@ -396,7 +469,11 @@ void acpi_tb_delete_table(struct acpi_table_desc *table_desc) case ACPI_TABLE_ORIGIN_ALLOCATED: ACPI_FREE(table_desc->pointer); break; - default:; + + /* Not mapped or allocated, there is nothing we can do */ + + default: + return; } table_desc->pointer = NULL; diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 09ca39e..0a706ca 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -118,6 +118,7 @@ acpi_tb_check_xsdt(acpi_physical_address address) return AE_OK; } +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_tb_initialize_facs @@ -148,6 +149,7 @@ acpi_status acpi_tb_initialize_facs(void) &acpi_gbl_FACS)); return status; } +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * @@ -444,7 +446,7 @@ struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index) * RETURN: None * * DESCRIPTION: Install an ACPI table into the global data structure. The - * table override mechanism is implemented here to allow the host + * table override mechanism is called to allow the host * OS to replace any table before it is installed in the root * table array. * @@ -454,11 +456,9 @@ void acpi_tb_install_table(acpi_physical_address address, char *signature, u32 table_index) { - u8 flags; - acpi_status status; - struct acpi_table_header *table_to_install; - struct acpi_table_header *mapped_table; - struct acpi_table_header *override_table = NULL; + struct acpi_table_header *table; + struct acpi_table_header *final_table; + struct acpi_table_desc *table_desc; if (!address) { ACPI_ERROR((AE_INFO, @@ -469,69 +469,78 @@ acpi_tb_install_table(acpi_physical_address address, /* Map just the table header */ - mapped_table = - acpi_os_map_memory(address, sizeof(struct acpi_table_header)); - if (!mapped_table) { + table = acpi_os_map_memory(address, sizeof(struct acpi_table_header)); + if (!table) { + ACPI_ERROR((AE_INFO, + "Could not map memory for table [%s] at %p", + signature, ACPI_CAST_PTR(void, address))); return; } /* If a particular signature is expected (DSDT/FACS), it must match */ - if (signature && !ACPI_COMPARE_NAME(mapped_table->signature, signature)) { + if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) { ACPI_ERROR((AE_INFO, "Invalid signature 0x%X for ACPI table, expected [%s]", - *ACPI_CAST_PTR(u32, mapped_table->signature), - signature)); + *ACPI_CAST_PTR(u32, table->signature), signature)); goto unmap_and_exit; } /* + * Initialize the table entry. Set the pointer to NULL, since the + * table is not fully mapped at this time. + */ + table_desc = &acpi_gbl_root_table_list.tables[table_index]; + + table_desc->address = address; + table_desc->pointer = NULL; + table_desc->length = table->length; + table_desc->flags = ACPI_TABLE_ORIGIN_MAPPED; + ACPI_MOVE_32_TO_32(table_desc->signature.ascii, table->signature); + + /* * ACPI Table Override: * * Before we install the table, let the host OS override it with a new * one if desired. Any table within the RSDT/XSDT can be replaced, * including the DSDT which is pointed to by the FADT. + * + * NOTE: If the table is overridden, then final_table will contain a + * mapped pointer to the full new table. If the table is not overridden, + * or if there has been a physical override, then the table will be + * fully mapped later (in verify table). In any case, we must + * unmap the header that was mapped above. */ - status = acpi_os_table_override(mapped_table, &override_table); - if (ACPI_SUCCESS(status) && override_table) { - ACPI_INFO((AE_INFO, - "%4.4s @ 0x%p Table override, replaced with:", - mapped_table->signature, ACPI_CAST_PTR(void, - address))); - - acpi_gbl_root_table_list.tables[table_index].pointer = - override_table; - address = ACPI_PTR_TO_PHYSADDR(override_table); - - table_to_install = override_table; - flags = ACPI_TABLE_ORIGIN_OVERRIDE; - } else { - table_to_install = mapped_table; - flags = ACPI_TABLE_ORIGIN_MAPPED; + final_table = acpi_tb_table_override(table, table_desc); + if (!final_table) { + final_table = table; /* There was no override */ } - /* Initialize the table entry */ + acpi_tb_print_table_header(table_desc->address, final_table); - acpi_gbl_root_table_list.tables[table_index].address = address; - acpi_gbl_root_table_list.tables[table_index].length = - table_to_install->length; - acpi_gbl_root_table_list.tables[table_index].flags = flags; - - ACPI_MOVE_32_TO_32(& - (acpi_gbl_root_table_list.tables[table_index]. - signature), table_to_install->signature); - - acpi_tb_print_table_header(address, table_to_install); + /* Set the global integer width (based upon revision of the DSDT) */ if (table_index == ACPI_TABLE_INDEX_DSDT) { + acpi_ut_set_integer_width(final_table->revision); + } - /* Global integer width is based upon revision of the DSDT */ - - acpi_ut_set_integer_width(table_to_install->revision); + /* + * If we have a physical override during this early loading of the ACPI + * tables, unmap the table for now. It will be mapped again later when + * it is actually used. This supports very early loading of ACPI tables, + * before virtual memory is fully initialized and running within the + * host OS. Note: A logical override has the ACPI_TABLE_ORIGIN_OVERRIDE + * flag set and will not be deleted below. + */ + if (final_table != table) { + acpi_tb_delete_table(table_desc); } unmap_and_exit: - acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header)); + + /* Always unmap the table header that we mapped above */ + + acpi_os_unmap_memory(table, sizeof(struct acpi_table_header)); } /******************************************************************************* diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c index d42ede52..6848499 100644 --- a/drivers/acpi/acpica/utdecode.c +++ b/drivers/acpi/acpica/utdecode.c @@ -497,19 +497,20 @@ char *acpi_ut_get_mutex_name(u32 mutex_id) /* Names for Notify() values, used for debug output */ -static const char *acpi_gbl_notify_value_names[] = { - "Bus Check", - "Device Check", - "Device Wake", - "Eject Request", - "Device Check Light", - "Frequency Mismatch", - "Bus Mode Mismatch", - "Power Fault", - "Capabilities Check", - "Device PLD Check", - "Reserved", - "System Locality Update" +static const char *acpi_gbl_notify_value_names[ACPI_NOTIFY_MAX + 1] = { + /* 00 */ "Bus Check", + /* 01 */ "Device Check", + /* 02 */ "Device Wake", + /* 03 */ "Eject Request", + /* 04 */ "Device Check Light", + /* 05 */ "Frequency Mismatch", + /* 06 */ "Bus Mode Mismatch", + /* 07 */ "Power Fault", + /* 08 */ "Capabilities Check", + /* 09 */ "Device PLD Check", + /* 10 */ "Reserved", + /* 11 */ "System Locality Update", + /* 12 */ "Shutdown Request" }; const char *acpi_ut_get_notify_name(u32 notify_value) @@ -519,9 +520,10 @@ const char *acpi_ut_get_notify_name(u32 notify_value) return (acpi_gbl_notify_value_names[notify_value]); } else if (notify_value <= ACPI_MAX_SYS_NOTIFY) { return ("Reserved"); - } else { /* Greater or equal to 0x80 */ - - return ("**Device Specific**"); + } else if (notify_value <= ACPI_MAX_DEVICE_SPECIFIC_NOTIFY) { + return ("Device Specific"); + } else { + return ("Hardware Specific"); } } #endif diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index 4153584..90f53b4 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -140,6 +140,7 @@ const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = { {NULL, ACPI_TYPE_ANY, NULL} }; +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * * Event and Hardware globals @@ -236,6 +237,7 @@ struct acpi_fixed_event_info acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS] = ACPI_BITMASK_RT_CLOCK_STATUS, ACPI_BITMASK_RT_CLOCK_ENABLE}, }; +#endif /* !ACPI_REDUCED_HARDWARE */ /******************************************************************************* * @@ -286,6 +288,8 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000; +#if (!ACPI_REDUCED_HARDWARE) + /* GPE support */ acpi_gbl_gpe_xrupt_list_head = NULL; @@ -294,6 +298,10 @@ acpi_status acpi_ut_init_globals(void) acpi_current_gpe_count = 0; acpi_gbl_all_gpes_initialized = FALSE; + acpi_gbl_global_event_handler = NULL; + +#endif /* !ACPI_REDUCED_HARDWARE */ + /* Global handlers */ acpi_gbl_system_notify.handler = NULL; @@ -302,7 +310,6 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_init_handler = NULL; acpi_gbl_table_handler = NULL; acpi_gbl_interface_handler = NULL; - acpi_gbl_global_event_handler = NULL; /* Global Lock support */ diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c index 8359c0c..246798e 100644 --- a/drivers/acpi/acpica/utinit.c +++ b/drivers/acpi/acpica/utinit.c @@ -53,27 +53,35 @@ ACPI_MODULE_NAME("utinit") /* Local prototypes */ static void acpi_ut_terminate(void); +#if (!ACPI_REDUCED_HARDWARE) + +static void acpi_ut_free_gpe_lists(void); + +#else + +#define acpi_ut_free_gpe_lists() +#endif /* !ACPI_REDUCED_HARDWARE */ + +#if (!ACPI_REDUCED_HARDWARE) /****************************************************************************** * - * FUNCTION: acpi_ut_terminate + * FUNCTION: acpi_ut_free_gpe_lists * * PARAMETERS: none * * RETURN: none * - * DESCRIPTION: Free global memory + * DESCRIPTION: Free global GPE lists * ******************************************************************************/ -static void acpi_ut_terminate(void) +static void acpi_ut_free_gpe_lists(void) { struct acpi_gpe_block_info *gpe_block; struct acpi_gpe_block_info *next_gpe_block; struct acpi_gpe_xrupt_info *gpe_xrupt_info; struct acpi_gpe_xrupt_info *next_gpe_xrupt_info; - ACPI_FUNCTION_TRACE(ut_terminate); - /* Free global GPE blocks and related info structures */ gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; @@ -91,7 +99,26 @@ static void acpi_ut_terminate(void) ACPI_FREE(gpe_xrupt_info); gpe_xrupt_info = next_gpe_xrupt_info; } +} +#endif /* !ACPI_REDUCED_HARDWARE */ + +/****************************************************************************** + * + * FUNCTION: acpi_ut_terminate + * + * PARAMETERS: none + * + * RETURN: none + * + * DESCRIPTION: Free global memory + * + ******************************************************************************/ + +static void acpi_ut_terminate(void) +{ + ACPI_FUNCTION_TRACE(ut_terminate); + acpi_ut_free_gpe_lists(); acpi_ut_delete_address_lists(); return_VOID; } diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 644e8c8..afa94f5 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -145,6 +145,8 @@ acpi_status acpi_enable_subsystem(u32 flags) ACPI_FUNCTION_TRACE(acpi_enable_subsystem); +#if (!ACPI_REDUCED_HARDWARE) + /* Enable ACPI mode */ if (!(flags & ACPI_NO_ACPI_ENABLE)) { @@ -169,6 +171,7 @@ acpi_status acpi_enable_subsystem(u32 flags) ACPI_WARNING((AE_INFO, "Could not map the FACS table")); return_ACPI_STATUS(status); } +#endif /* !ACPI_REDUCED_HARDWARE */ /* * Install the default op_region handlers. These are installed unless @@ -184,7 +187,7 @@ acpi_status acpi_enable_subsystem(u32 flags) return_ACPI_STATUS(status); } } - +#if (!ACPI_REDUCED_HARDWARE) /* * Initialize ACPI Event handling (Fixed and General Purpose) * @@ -220,6 +223,7 @@ acpi_status acpi_enable_subsystem(u32 flags) return_ACPI_STATUS(status); } } +#endif /* !ACPI_REDUCED_HARDWARE */ return_ACPI_STATUS(status); } diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index e5d53b7..5577762 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -558,33 +558,48 @@ void apei_resources_release(struct apei_resources *resources) } EXPORT_SYMBOL_GPL(apei_resources_release); -static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr) +static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, + u32 *access_bit_width) { - u32 width, space_id; + u32 bit_width, bit_offset, access_size_code, space_id; - width = reg->bit_width; + bit_width = reg->bit_width; + bit_offset = reg->bit_offset; + access_size_code = reg->access_width; space_id = reg->space_id; /* Handle possible alignment issues */ memcpy(paddr, ®->address, sizeof(*paddr)); if (!*paddr) { pr_warning(FW_BUG APEI_PFX - "Invalid physical address in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid physical address in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } - if ((width != 8) && (width != 16) && (width != 32) && (width != 64)) { + if (access_size_code < 1 || access_size_code > 4) { pr_warning(FW_BUG APEI_PFX - "Invalid bit width in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid access size code in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); + return -EINVAL; + } + *access_bit_width = 1UL << (access_size_code + 2); + + if ((bit_width + bit_offset) > *access_bit_width) { + pr_warning(FW_BUG APEI_PFX + "Invalid bit width + offset in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } if (space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY && space_id != ACPI_ADR_SPACE_SYSTEM_IO) { pr_warning(FW_BUG APEI_PFX - "Invalid address space type in GAR [0x%llx/%u/%u]\n", - *paddr, width, space_id); + "Invalid address space type in GAR [0x%llx/%u/%u/%u/%u]\n", + *paddr, bit_width, bit_offset, access_size_code, + space_id); return -EINVAL; } @@ -595,23 +610,25 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr) int apei_read(u64 *val, struct acpi_generic_address *reg) { int rc; + u32 access_bit_width; u64 address; acpi_status status; - rc = apei_check_gar(reg, &address); + rc = apei_check_gar(reg, &address, &access_bit_width); if (rc) return rc; *val = 0; switch(reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_read_memory64((acpi_physical_address) - address, val, reg->bit_width); + status = acpi_os_read_memory((acpi_physical_address) address, + val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; case ACPI_ADR_SPACE_SYSTEM_IO: - status = acpi_os_read_port(address, (u32 *)val, reg->bit_width); + status = acpi_os_read_port(address, (u32 *)val, + access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; @@ -627,22 +644,23 @@ EXPORT_SYMBOL_GPL(apei_read); int apei_write(u64 val, struct acpi_generic_address *reg) { int rc; + u32 access_bit_width; u64 address; acpi_status status; - rc = apei_check_gar(reg, &address); + rc = apei_check_gar(reg, &address, &access_bit_width); if (rc) return rc; switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: - status = acpi_os_write_memory64((acpi_physical_address) - address, val, reg->bit_width); + status = acpi_os_write_memory((acpi_physical_address) address, + val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; case ACPI_ADR_SPACE_SYSTEM_IO: - status = acpi_os_write_port(address, val, reg->bit_width); + status = acpi_os_write_port(address, val, access_bit_width); if (ACPI_FAILURE(status)) return -EIO; break; @@ -661,23 +679,24 @@ static int collect_res_callback(struct apei_exec_context *ctx, struct apei_resources *resources = data; struct acpi_generic_address *reg = &entry->register_region; u8 ins = entry->instruction; + u32 access_bit_width; u64 paddr; int rc; if (!(ctx->ins_table[ins].flags & APEI_EXEC_INS_ACCESS_REGISTER)) return 0; - rc = apei_check_gar(reg, &paddr); + rc = apei_check_gar(reg, &paddr, &access_bit_width); if (rc) return rc; switch (reg->space_id) { case ACPI_ADR_SPACE_SYSTEM_MEMORY: return apei_res_add(&resources->iomem, paddr, - reg->bit_width / 8); + access_bit_width / 8); case ACPI_ADR_SPACE_SYSTEM_IO: return apei_res_add(&resources->ioport, paddr, - reg->bit_width / 8); + access_bit_width / 8); default: return -EINVAL; } diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index 5d41894..e6defd8 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -362,6 +362,7 @@ void apei_estatus_print(const char *pfx, gedata_len = gdata->error_data_length; apei_estatus_print_section(pfx, gdata, sec_no); data_len -= gedata_len + sizeof(*gdata); + gdata = (void *)(gdata + 1) + gedata_len; sec_no++; } } @@ -396,6 +397,7 @@ int apei_estatus_check(const struct acpi_hest_generic_status *estatus) if (gedata_len > data_len - sizeof(*gdata)) return -EINVAL; data_len -= gedata_len + sizeof(*gdata); + gdata = (void *)(gdata + 1) + gedata_len; } if (data_len) return -EINVAL; diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 4ca087d..8e17936 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -74,6 +74,8 @@ struct vendor_error_type_extension { u8 reserved[3]; }; +static u32 notrigger; + static u32 vendor_flags; static struct debugfs_blob_wrapper vendor_blob; static char vendor_dev[64]; @@ -238,7 +240,7 @@ static void *einj_get_parameter_address(void) return v5param; } } - if (paddrv4) { + if (param_extension && paddrv4) { struct einj_parameter *v4param; v4param = acpi_os_map_memory(paddrv4, sizeof(*v4param)); @@ -496,9 +498,11 @@ static int __einj_error_inject(u32 type, u64 param1, u64 param2) if (rc) return rc; trigger_paddr = apei_exec_ctx_get_output(&ctx); - rc = __einj_error_trigger(trigger_paddr, type, param1, param2); - if (rc) - return rc; + if (notrigger == 0) { + rc = __einj_error_trigger(trigger_paddr, type, param1, param2); + if (rc) + return rc; + } rc = apei_exec_run_optional(&ctx, ACPI_EINJ_END_OPERATION); return rc; @@ -700,6 +704,11 @@ static int __init einj_init(void) einj_debug_dir, &error_param2); if (!fentry) goto err_unmap; + + fentry = debugfs_create_x32("notrigger", S_IRUSR | S_IWUSR, + einj_debug_dir, ¬rigger); + if (!fentry) + goto err_unmap; } if (vendor_dev[0]) { diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index eb9fab5..e4d9d24 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -917,7 +917,7 @@ static int erst_check_table(struct acpi_table_erst *erst_tab) { if ((erst_tab->header_length != (sizeof(struct acpi_table_erst) - sizeof(erst_tab->header))) - && (erst_tab->header_length != sizeof(struct acpi_table_einj))) + && (erst_tab->header_length != sizeof(struct acpi_table_erst))) return -EINVAL; if (erst_tab->header.length < sizeof(struct acpi_table_erst)) return -EINVAL; diff --git a/drivers/acpi/bgrt.c b/drivers/acpi/bgrt.c new file mode 100644 index 0000000..8cf6c46 --- /dev/null +++ b/drivers/acpi/bgrt.c @@ -0,0 +1,175 @@ +/* + * Copyright 2012 Red Hat, Inc <mjg@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <acpi/acpi.h> +#include <acpi/acpi_bus.h> + +static struct acpi_table_bgrt *bgrt_tab; +static struct kobject *bgrt_kobj; + +struct bmp_header { + u16 id; + u32 size; +} __attribute ((packed)); + +static struct bmp_header bmp_header; + +static ssize_t show_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->version); +} +static DEVICE_ATTR(version, S_IRUGO, show_version, NULL); + +static ssize_t show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->status); +} +static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + +static ssize_t show_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_type); +} +static DEVICE_ATTR(type, S_IRUGO, show_type, NULL); + +static ssize_t show_xoffset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_x); +} +static DEVICE_ATTR(xoffset, S_IRUGO, show_xoffset, NULL); + +static ssize_t show_yoffset(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", bgrt_tab->image_offset_y); +} +static DEVICE_ATTR(yoffset, S_IRUGO, show_yoffset, NULL); + +static ssize_t show_image(struct file *file, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + int size = attr->size; + void __iomem *image = attr->private; + + if (off >= size) { + count = 0; + } else { + if (off + count > size) + count = size - off; + + memcpy_fromio(buf, image+off, count); + } + + return count; +} + +static struct bin_attribute image_attr = { + .attr = { + .name = "image", + .mode = S_IRUGO, + }, + .read = show_image, +}; + +static struct attribute *bgrt_attributes[] = { + &dev_attr_version.attr, + &dev_attr_status.attr, + &dev_attr_type.attr, + &dev_attr_xoffset.attr, + &dev_attr_yoffset.attr, + NULL, +}; + +static struct attribute_group bgrt_attribute_group = { + .attrs = bgrt_attributes, +}; + +static int __init bgrt_init(void) +{ + acpi_status status; + int ret; + void __iomem *bgrt; + + if (acpi_disabled) + return -ENODEV; + + status = acpi_get_table("BGRT", 0, + (struct acpi_table_header **)&bgrt_tab); + + if (ACPI_FAILURE(status)) + return -ENODEV; + + sysfs_bin_attr_init(&image_attr); + + bgrt = ioremap(bgrt_tab->image_address, sizeof(struct bmp_header)); + + if (!bgrt) { + ret = -EINVAL; + goto out_err; + } + + memcpy_fromio(&bmp_header, bgrt, sizeof(bmp_header)); + image_attr.size = bmp_header.size; + iounmap(bgrt); + + image_attr.private = ioremap(bgrt_tab->image_address, image_attr.size); + + if (!image_attr.private) { + ret = -EINVAL; + goto out_err; + } + + + bgrt_kobj = kobject_create_and_add("bgrt", acpi_kobj); + if (!bgrt_kobj) { + ret = -EINVAL; + goto out_iounmap; + } + + ret = sysfs_create_group(bgrt_kobj, &bgrt_attribute_group); + if (ret) + goto out_kobject; + + ret = sysfs_create_bin_file(bgrt_kobj, &image_attr); + if (ret) + goto out_group; + + return 0; + +out_group: + sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); +out_kobject: + kobject_put(bgrt_kobj); +out_iounmap: + iounmap(image_attr.private); +out_err: + return ret; +} + +static void __exit bgrt_exit(void) +{ + iounmap(image_attr.private); + sysfs_remove_group(bgrt_kobj, &bgrt_attribute_group); + sysfs_remove_bin_file(bgrt_kobj, &image_attr); +} + +module_init(bgrt_init); +module_exit(bgrt_exit); + +MODULE_AUTHOR("Matthew Garrett"); +MODULE_DESCRIPTION("BGRT boot graphic support"); +MODULE_LICENSE("GPL"); diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9ecec98..3263b68 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -1010,6 +1010,7 @@ static int __init acpi_bus_init(void) } struct kobject *acpi_kobj; +EXPORT_SYMBOL_GPL(acpi_kobj); static int __init acpi_init(void) { diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index b19a18d..7edaccc 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -445,6 +445,16 @@ int ec_transaction(u8 command, EXPORT_SYMBOL(ec_transaction); +/* Get the handle to the EC device */ +acpi_handle ec_get_handle(void) +{ + if (!first_ec) + return NULL; + return first_ec->handle; +} + +EXPORT_SYMBOL(ec_get_handle); + void acpi_ec_block_transactions(void) { struct acpi_ec *ec = first_ec; @@ -812,10 +822,10 @@ static int acpi_ec_add(struct acpi_device *device) first_ec = ec; device->driver_data = ec; - WARN(!request_region(ec->data_addr, 1, "EC data"), - "Could not request EC data io port 0x%lx", ec->data_addr); - WARN(!request_region(ec->command_addr, 1, "EC cmd"), - "Could not request EC cmd io port 0x%lx", ec->command_addr); + ret = !!request_region(ec->data_addr, 1, "EC data"); + WARN(!ret, "Could not request EC data io port 0x%lx", ec->data_addr); + ret = !!request_region(ec->command_addr, 1, "EC cmd"); + WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr); pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 7a2035f..266bc58 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -95,8 +95,8 @@ static int suspend_nvs_register(unsigned long start, unsigned long size) { struct nvs_page *entry, *next; - pr_info("PM: Registering ACPI NVS region at %lx (%ld bytes)\n", - start, size); + pr_info("PM: Registering ACPI NVS region [mem %#010lx-%#010lx] (%ld bytes)\n", + start, start + size - 1, size); while (size > 0) { unsigned int nr_bytes; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 412a1e0..ba14fb9 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -77,6 +77,9 @@ EXPORT_SYMBOL(acpi_in_debugger); extern char line_buf[80]; #endif /*ENABLE_DEBUGGER */ +static int (*__acpi_os_prepare_sleep)(u8 sleep_state, u32 pm1a_ctrl, + u32 pm1b_ctrl); + static acpi_osd_handler acpi_irq_handler; static void *acpi_irq_context; static struct workqueue_struct *kacpid_wq; @@ -347,7 +350,7 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr) unsigned long pfn; pfn = pg_off >> PAGE_SHIFT; - if (page_is_ram(pfn)) + if (should_use_kmap(pfn)) kunmap(pfn_to_page(pfn)); else iounmap(vaddr); @@ -554,6 +557,15 @@ acpi_os_table_override(struct acpi_table_header * existing_table, return AE_OK; } +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address * new_address, + u32 *new_table_length) +{ + return AE_SUPPORT; +} + + static irqreturn_t acpi_irq(int irq, void *dev_id) { u32 handled; @@ -595,7 +607,8 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler, acpi_irq_handler = handler; acpi_irq_context = context; - if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) { + if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi", + acpi_irq)) { printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq); acpi_irq_handler = NULL; return AE_NOT_ACQUIRED; @@ -699,49 +712,6 @@ acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width) EXPORT_SYMBOL(acpi_os_write_port); -acpi_status -acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width) -{ - void __iomem *virt_addr; - unsigned int size = width / 8; - bool unmap = false; - u32 dummy; - - rcu_read_lock(); - virt_addr = acpi_map_vaddr_lookup(phys_addr, size); - if (!virt_addr) { - rcu_read_unlock(); - virt_addr = acpi_os_ioremap(phys_addr, size); - if (!virt_addr) - return AE_BAD_ADDRESS; - unmap = true; - } - - if (!value) - value = &dummy; - - switch (width) { - case 8: - *(u8 *) value = readb(virt_addr); - break; - case 16: - *(u16 *) value = readw(virt_addr); - break; - case 32: - *(u32 *) value = readl(virt_addr); - break; - default: - BUG(); - } - - if (unmap) - iounmap(virt_addr); - else - rcu_read_unlock(); - - return AE_OK; -} - #ifdef readq static inline u64 read64(const volatile void __iomem *addr) { @@ -758,7 +728,7 @@ static inline u64 read64(const volatile void __iomem *addr) #endif acpi_status -acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width) +acpi_os_read_memory(acpi_physical_address phys_addr, u64 *value, u32 width) { void __iomem *virt_addr; unsigned int size = width / 8; @@ -803,45 +773,6 @@ acpi_os_read_memory64(acpi_physical_address phys_addr, u64 *value, u32 width) return AE_OK; } -acpi_status -acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width) -{ - void __iomem *virt_addr; - unsigned int size = width / 8; - bool unmap = false; - - rcu_read_lock(); - virt_addr = acpi_map_vaddr_lookup(phys_addr, size); - if (!virt_addr) { - rcu_read_unlock(); - virt_addr = acpi_os_ioremap(phys_addr, size); - if (!virt_addr) - return AE_BAD_ADDRESS; - unmap = true; - } - - switch (width) { - case 8: - writeb(value, virt_addr); - break; - case 16: - writew(value, virt_addr); - break; - case 32: - writel(value, virt_addr); - break; - default: - BUG(); - } - - if (unmap) - iounmap(virt_addr); - else - rcu_read_unlock(); - - return AE_OK; -} - #ifdef writeq static inline void write64(u64 val, volatile void __iomem *addr) { @@ -856,7 +787,7 @@ static inline void write64(u64 val, volatile void __iomem *addr) #endif acpi_status -acpi_os_write_memory64(acpi_physical_address phys_addr, u64 value, u32 width) +acpi_os_write_memory(acpi_physical_address phys_addr, u64 value, u32 width) { void __iomem *virt_addr; unsigned int size = width / 8; @@ -1641,3 +1572,24 @@ acpi_status acpi_os_terminate(void) return AE_OK; } + +acpi_status acpi_os_prepare_sleep(u8 sleep_state, u32 pm1a_control, + u32 pm1b_control) +{ + int rc = 0; + if (__acpi_os_prepare_sleep) + rc = __acpi_os_prepare_sleep(sleep_state, + pm1a_control, pm1b_control); + if (rc < 0) + return AE_ERROR; + else if (rc > 0) + return AE_CTRL_SKIP; + + return AE_OK; +} + +void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, + u32 pm1a_ctrl, u32 pm1b_ctrl)) +{ + __acpi_os_prepare_sleep = func; +} diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 9ac2a9f..7049a7d 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -40,9 +40,11 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/slab.h> +#include <linux/pm_runtime.h> #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> #include "sleep.h" +#include "internal.h" #define PREFIX "ACPI: " @@ -77,6 +79,20 @@ static struct acpi_driver acpi_power_driver = { }, }; +/* + * A power managed device + * A device may rely on multiple power resources. + * */ +struct acpi_power_managed_device { + struct device *dev; /* The physical device */ + acpi_handle *handle; +}; + +struct acpi_power_resource_device { + struct acpi_power_managed_device *device; + struct acpi_power_resource_device *next; +}; + struct acpi_power_resource { struct acpi_device * device; acpi_bus_id name; @@ -84,6 +100,9 @@ struct acpi_power_resource { u32 order; unsigned int ref_count; struct mutex resource_lock; + + /* List of devices relying on this power resource */ + struct acpi_power_resource_device *devices; }; static struct list_head acpi_power_resource_list; @@ -183,8 +202,26 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) return 0; } +/* Resume the device when all power resources in _PR0 are on */ +static void acpi_power_on_device(struct acpi_power_managed_device *device) +{ + struct acpi_device *acpi_dev; + acpi_handle handle = device->handle; + int state; + + if (acpi_bus_get_device(handle, &acpi_dev)) + return; + + if(acpi_power_get_inferred_state(acpi_dev, &state)) + return; + + if (state == ACPI_STATE_D0 && pm_runtime_suspended(device->dev)) + pm_request_resume(device->dev); +} + static int __acpi_power_on(struct acpi_power_resource *resource) { + struct acpi_power_resource_device *device_list = resource->devices; acpi_status status = AE_OK; status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL); @@ -197,6 +234,12 @@ static int __acpi_power_on(struct acpi_power_resource *resource) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n", resource->name)); + while (device_list) { + acpi_power_on_device(device_list->device); + + device_list = device_list->next; + } + return 0; } @@ -299,6 +342,125 @@ static int acpi_power_on_list(struct acpi_handle_list *list) return result; } +static void __acpi_power_resource_unregister_device(struct device *dev, + acpi_handle res_handle) +{ + struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *prev, *curr; + + if (acpi_power_get_context(res_handle, &resource)) + return; + + mutex_lock(&resource->resource_lock); + prev = NULL; + curr = resource->devices; + while (curr) { + if (curr->device->dev == dev) { + if (!prev) + resource->devices = curr->next; + else + prev->next = curr->next; + + kfree(curr); + break; + } + + prev = curr; + curr = curr->next; + } + mutex_unlock(&resource->resource_lock); +} + +/* Unlink dev from all power resources in _PR0 */ +void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handle) +{ + struct acpi_device *acpi_dev; + struct acpi_handle_list *list; + int i; + + if (!dev || !handle) + return; + + if (acpi_bus_get_device(handle, &acpi_dev)) + return; + + list = &acpi_dev->power.states[ACPI_STATE_D0].resources; + + for (i = 0; i < list->count; i++) + __acpi_power_resource_unregister_device(dev, + list->handles[i]); +} + +static int __acpi_power_resource_register_device( + struct acpi_power_managed_device *powered_device, acpi_handle handle) +{ + struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *power_resource_device; + int result; + + result = acpi_power_get_context(handle, &resource); + if (result) + return result; + + power_resource_device = kzalloc( + sizeof(*power_resource_device), GFP_KERNEL); + if (!power_resource_device) + return -ENOMEM; + + power_resource_device->device = powered_device; + + mutex_lock(&resource->resource_lock); + power_resource_device->next = resource->devices; + resource->devices = power_resource_device; + mutex_unlock(&resource->resource_lock); + + return 0; +} + +/* Link dev to all power resources in _PR0 */ +int acpi_power_resource_register_device(struct device *dev, acpi_handle handle) +{ + struct acpi_device *acpi_dev; + struct acpi_handle_list *list; + struct acpi_power_managed_device *powered_device; + int i, ret; + + if (!dev || !handle) + return -ENODEV; + + ret = acpi_bus_get_device(handle, &acpi_dev); + if (ret) + goto no_power_resource; + + if (!acpi_dev->power.flags.power_resources) + goto no_power_resource; + + powered_device = kzalloc(sizeof(*powered_device), GFP_KERNEL); + if (!powered_device) + return -ENOMEM; + + powered_device->dev = dev; + powered_device->handle = handle; + + list = &acpi_dev->power.states[ACPI_STATE_D0].resources; + + for (i = 0; i < list->count; i++) { + ret = __acpi_power_resource_register_device(powered_device, + list->handles[i]); + + if (ret) { + acpi_power_resource_unregister_device(dev, handle); + break; + } + } + + return ret; + +no_power_resource: + printk(KERN_WARNING PREFIX "Invalid Power Resource to register!"); + return -ENODEV; +} + /** * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in * ACPI 3.0) _PSW (Power State Wake) @@ -500,14 +662,14 @@ int acpi_power_transition(struct acpi_device *device, int state) { int result; - if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3)) + if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD)) return -EINVAL; if (device->power.state == state) return 0; if ((device->power.state < ACPI_STATE_D0) - || (device->power.state > ACPI_STATE_D3)) + || (device->power.state > ACPI_STATE_D3_COLD)) return -ENODEV; /* TBD: Resources must be ordered. */ diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 2801b41..0734086 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -46,7 +46,6 @@ #include <linux/slab.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/cpu.h> #include <asm/delay.h> #include <asm/uaccess.h> @@ -68,6 +67,7 @@ #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 #define ACPI_PROCESSOR_NOTIFY_POWER 0x81 #define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82 +#define ACPI_PROCESSOR_DEVICE_HID "ACPI0007" #define ACPI_PROCESSOR_LIMIT_USER 0 #define ACPI_PROCESSOR_LIMIT_THERMAL 1 @@ -88,7 +88,7 @@ static int acpi_processor_start(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { {ACPI_PROCESSOR_OBJECT_HID, 0}, - {"ACPI0007", 0}, + {ACPI_PROCESSOR_DEVICE_HID, 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, processor_device_ids); @@ -536,8 +536,8 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) return -ENOMEM; if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { - kfree(pr); - return -ENOMEM; + result = -ENOMEM; + goto err_free_pr; } pr->handle = device->handle; @@ -577,7 +577,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) dev = get_cpu_device(pr->id); if (sysfs_create_link(&device->dev.kobj, &dev->kobj, "sysdev")) { result = -EFAULT; - goto err_free_cpumask; + goto err_clear_processor; } /* @@ -595,9 +595,15 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) err_remove_sysfs: sysfs_remove_link(&device->dev.kobj, "sysdev"); +err_clear_processor: + /* + * processor_device_array is not cleared to allow checks for buggy BIOS + */ + per_cpu(processors, pr->id) = NULL; err_free_cpumask: free_cpumask_var(pr->throttling.shared_cpu_map); - +err_free_pr: + kfree(pr); return result; } @@ -742,20 +748,46 @@ static void acpi_processor_hotplug_notify(acpi_handle handle, return; } +static acpi_status is_processor_device(acpi_handle handle) +{ + struct acpi_device_info *info; + char *hid; + acpi_status status; + + status = acpi_get_object_info(handle, &info); + if (ACPI_FAILURE(status)) + return status; + + if (info->type == ACPI_TYPE_PROCESSOR) { + kfree(info); + return AE_OK; /* found a processor object */ + } + + if (!(info->valid & ACPI_VALID_HID)) { + kfree(info); + return AE_ERROR; + } + + hid = info->hardware_id.string; + if ((hid == NULL) || strcmp(hid, ACPI_PROCESSOR_DEVICE_HID)) { + kfree(info); + return AE_ERROR; + } + + kfree(info); + return AE_OK; /* found a processor device object */ +} + static acpi_status processor_walk_namespace_cb(acpi_handle handle, u32 lvl, void *context, void **rv) { acpi_status status; int *action = context; - acpi_object_type type = 0; - status = acpi_get_type(handle, &type); + status = is_processor_device(handle); if (ACPI_FAILURE(status)) - return (AE_OK); - - if (type != ACPI_TYPE_PROCESSOR) - return (AE_OK); + return AE_OK; /* not a processor; continue to walk */ switch (*action) { case INSTALL_NOTIFY_HANDLER: @@ -773,7 +805,8 @@ processor_walk_namespace_cb(acpi_handle handle, break; } - return (AE_OK); + /* found a processor; skip walking underneath */ + return AE_CTRL_DEPTH; } static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr) @@ -831,7 +864,7 @@ void acpi_processor_install_hotplug_notify(void) { #ifdef CONFIG_ACPI_HOTPLUG_CPU int action = INSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, + acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, processor_walk_namespace_cb, NULL, &action, NULL); @@ -844,7 +877,7 @@ void acpi_processor_uninstall_hotplug_notify(void) { #ifdef CONFIG_ACPI_HOTPLUG_CPU int action = UNINSTALL_NOTIFY_HANDLER; - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, + acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, processor_walk_namespace_cb, NULL, &action, NULL); diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 0e8e2de..b3447f6 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -770,6 +770,35 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return index; } + +/** + * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining) + * @dev: the target CPU + * @index: the index of suggested state + */ +static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) +{ + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage); + + ACPI_FLUSH_CPU_CACHE(); + + while (1) { + + if (cx->entry_method == ACPI_CSTATE_HALT) + halt(); + else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) { + inb(cx->address); + /* See comment in acpi_idle_do_entry() */ + inl(acpi_gbl_FADT.xpm_timer_block.address); + } else + return -ENODEV; + } + + /* Never reached */ + return 0; +} + /** * acpi_idle_enter_simple - enters an ACPI state without BM handling * @dev: the target CPU @@ -1077,12 +1106,14 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_c1; + state->enter_dead = acpi_idle_play_dead; drv->safe_state_index = count; break; case ACPI_STATE_C2: state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_simple; + state->enter_dead = acpi_idle_play_dead; drv->safe_state_index = count; break; @@ -1159,8 +1190,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) * to make the code that updates C-States be called once. */ - if (smp_processor_id() == 0 && - cpuidle_get_driver() == &acpi_idle_driver) { + if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) { cpuidle_pause_and_lock(); /* Protect against cpu-hotplug */ diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 3b599ab..641b545 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -57,6 +57,27 @@ ACPI_MODULE_NAME("processor_thermal"); static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg); static unsigned int acpi_thermal_cpufreq_is_init = 0; +#define reduction_pctg(cpu) \ + per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu)) + +/* + * Emulate "per package data" using per cpu data (which should really be + * provided elsewhere) + * + * Note we can lose a CPU on cpu hotunplug, in this case we forget the state + * temporarily. Fortunately that's not a big issue here (I hope) + */ +static int phys_package_first_cpu(int cpu) +{ + int i; + int id = topology_physical_package_id(cpu); + + for_each_online_cpu(i) + if (topology_physical_package_id(i) == id) + return i; + return 0; +} + static int cpu_has_cpufreq(unsigned int cpu) { struct cpufreq_policy policy; @@ -76,7 +97,7 @@ static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb, max_freq = ( policy->cpuinfo.max_freq * - (100 - per_cpu(cpufreq_thermal_reduction_pctg, policy->cpu) * 20) + (100 - reduction_pctg(policy->cpu) * 20) ) / 100; cpufreq_verify_within_limits(policy, 0, max_freq); @@ -102,16 +123,28 @@ static int cpufreq_get_cur_state(unsigned int cpu) if (!cpu_has_cpufreq(cpu)) return 0; - return per_cpu(cpufreq_thermal_reduction_pctg, cpu); + return reduction_pctg(cpu); } static int cpufreq_set_cur_state(unsigned int cpu, int state) { + int i; + if (!cpu_has_cpufreq(cpu)) return 0; - per_cpu(cpufreq_thermal_reduction_pctg, cpu) = state; - cpufreq_update_policy(cpu); + reduction_pctg(cpu) = state; + + /* + * Update all the CPUs in the same package because they all + * contribute to the temperature and often share the same + * frequency. + */ + for_each_online_cpu(i) { + if (topology_physical_package_id(i) == + topology_physical_package_id(cpu)) + cpufreq_update_policy(i); + } return 0; } @@ -119,10 +152,6 @@ void acpi_thermal_cpufreq_init(void) { int i; - for (i = 0; i < nr_cpu_ids; i++) - if (cpu_present(i)) - per_cpu(cpufreq_thermal_reduction_pctg, i) = 0; - i = cpufreq_register_notifier(&acpi_thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); if (!i) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 605a295..1d02b7b 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -769,7 +769,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, u64 *value) { u32 bit_width, bit_offset; - u64 ptc_value; + u32 ptc_value; u64 ptc_mask; struct acpi_processor_throttling *throttling; int ret = -1; @@ -777,12 +777,11 @@ static int acpi_read_throttling_status(struct acpi_processor *pr, throttling = &pr->throttling; switch (throttling->status_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: - ptc_value = 0; bit_width = throttling->status_register.bit_width; bit_offset = throttling->status_register.bit_offset; acpi_os_read_port((acpi_io_address) throttling->status_register. - address, (u32 *) &ptc_value, + address, &ptc_value, (u32) (bit_width + bit_offset)); ptc_mask = (1 << bit_width) - 1; *value = (u64) ((ptc_value >> bit_offset) & ptc_mask); diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index a6c77e8b..c1d6124 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -23,8 +23,7 @@ void acpi_reboot(void) /* Is the reset register supported? The spec says we should be * checking the bit width and bit offset, but Windows ignores * these fields */ - if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER)) - return; + /* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */ reset_value = acpi_gbl_FADT.reset_value; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 8ab80ba..767e2dc 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -880,18 +880,22 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) int j; device->power.flags.power_resources = 1; - ps->flags.valid = 1; for (j = 0; j < ps->resources.count; j++) acpi_bus_add_power_resource(ps->resources.handles[j]); } + /* The exist of _PR3 indicates D3Cold support */ + if (i == ACPI_STATE_D3) { + status = acpi_get_handle(device->handle, object_name, &handle); + if (ACPI_SUCCESS(status)) + device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1; + } + /* Evaluate "_PSx" to see if we can do explicit sets */ object_name[2] = 'S'; status = acpi_get_handle(device->handle, object_name, &handle); - if (ACPI_SUCCESS(status)) { + if (ACPI_SUCCESS(status)) ps->flags.explicit_set = 1; - ps->flags.valid = 1; - } /* State is valid if we have some power control */ if (ps->resources.count || ps->flags.explicit_set) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ca191ff..1d661b5 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -17,6 +17,8 @@ #include <linux/suspend.h> #include <linux/reboot.h> #include <linux/acpi.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> #include <asm/io.h> @@ -26,6 +28,24 @@ #include "internal.h" #include "sleep.h" +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + +static u8 wake_sleep_flags(void) +{ + u8 flags = ACPI_NO_OPTIONAL_METHODS; + + if (gts) + flags |= ACPI_EXECUTE_GTS; + if (bfs) + flags |= ACPI_EXECUTE_BFS; + + return flags; +} + static u8 sleep_states[ACPI_S_STATE_COUNT]; static void acpi_sleep_tts_switch(u32 acpi_state) @@ -243,6 +263,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; u32 acpi_state = acpi_target_sleep_state; + u8 flags = wake_sleep_flags(); int error; ACPI_FLUSH_CPU_CACHE(); @@ -250,7 +271,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state); + status = acpi_enter_sleep_state(acpi_state, flags); break; case ACPI_STATE_S3: @@ -265,7 +286,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state); + acpi_leave_sleep_state_prep(acpi_state, flags); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -529,27 +550,30 @@ static int acpi_hibernation_begin(void) static int acpi_hibernation_enter(void) { + u8 flags = wake_sleep_flags(); acpi_status status = AE_OK; ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4); + status = acpi_enter_sleep_state(ACPI_STATE_S4, flags); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_hibernation_leave(void) { + u8 flags = wake_sleep_flags(); + /* * If ACPI is not enabled by the BIOS and the boot kernel, we need to * enable it here. */ acpi_enable(); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -730,6 +754,40 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) #ifdef CONFIG_PM_SLEEP /** + * acpi_pm_device_run_wake - Enable/disable wake-up for given device. + * @phys_dev: Device to enable/disable the platform to wake-up the system for. + * @enable: Whether enable or disable the wake-up functionality. + * + * Find the ACPI device object corresponding to @pci_dev and try to + * enable/disable the GPE associated with it. + */ +int acpi_pm_device_run_wake(struct device *phys_dev, bool enable) +{ + struct acpi_device *dev; + acpi_handle handle; + + if (!device_run_wake(phys_dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(phys_dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { + dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", + __func__); + return -ENODEV; + } + + if (enable) { + acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); + acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); + } else { + acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); + acpi_disable_wakeup_device_power(dev); + } + + return 0; +} + +/** * acpi_pm_device_sleep_wake - enable or disable the system wake-up * capability of given device * @dev: device to handle @@ -770,10 +828,12 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { + u8 flags = wake_sleep_flags(); + /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5); + acpi_enter_sleep_state(ACPI_STATE_S5, flags); } /* @@ -788,13 +848,13 @@ static void __init acpi_gts_bfs_check(void) { acpi_handle dummy; - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy))) + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy))) { printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " "please notify linux-acpi@vger.kernel.org\n"); } - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy))) + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy))) { printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 48fbc64..7dbebea 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -941,13 +941,13 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) if (!tz) return -EINVAL; - /* Get temperature [_TMP] (required) */ - result = acpi_thermal_get_temperature(tz); + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); if (result) return result; - /* Get trip points [_CRT, _PSV, etc.] (required) */ - result = acpi_thermal_get_trip_points(tz); + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); if (result) return result; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index eaef02a..9577b6f 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -548,27 +548,27 @@ acpi_video_device_EDID(struct acpi_video_device *device, * 1. The system BIOS should NOT automatically control the brightness * level of the LCD when the power changes from AC to DC. * Return Value: - * -1 wrong arg. + * -EINVAL wrong arg. */ static int acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) { - u64 status = 0; + acpi_status status; union acpi_object arg0 = { ACPI_TYPE_INTEGER }; struct acpi_object_list args = { 1, &arg0 }; - if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) { - status = -1; - goto Failed; - } + if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) + return -EINVAL; arg0.integer.value = (lcd_flag << 2) | bios_flag; video->dos_setting = arg0.integer.value; - acpi_evaluate_object(video->device->handle, "_DOS", &args, NULL); + status = acpi_evaluate_object(video->device->handle, "_DOS", + &args, NULL); + if (ACPI_FAILURE(status)) + return -EIO; - Failed: - return status; + return 0; } /* @@ -1343,15 +1343,17 @@ static int acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { - int status = 0; + int status; struct acpi_device *dev; - acpi_video_device_enumerate(video); + status = acpi_video_device_enumerate(video); + if (status) + return status; list_for_each_entry(dev, &device->children, node) { status = acpi_video_bus_get_one_device(dev, video); - if (ACPI_FAILURE(status)) { + if (status) { printk(KERN_WARNING PREFIX "Can't attach device\n"); continue; @@ -1653,15 +1655,20 @@ static int acpi_video_bus_add(struct acpi_device *device) mutex_init(&video->device_list_lock); INIT_LIST_HEAD(&video->video_device_list); - acpi_video_bus_get_devices(video, device); - acpi_video_bus_start_devices(video); + error = acpi_video_bus_get_devices(video, device); + if (error) + goto err_free_video; video->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_stop_video; + goto err_put_video; } + error = acpi_video_bus_start_devices(video); + if (error) + goto err_free_input_dev; + snprintf(video->phys, sizeof(video->phys), "%s/video/input0", acpi_device_hid(video->device)); @@ -1682,7 +1689,7 @@ static int acpi_video_bus_add(struct acpi_device *device) error = input_register_device(input); if (error) - goto err_free_input_dev; + goto err_stop_video; printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device), @@ -1692,14 +1699,19 @@ static int acpi_video_bus_add(struct acpi_device *device) video->pm_nb.notifier_call = acpi_video_resume; video->pm_nb.priority = 0; - register_pm_notifier(&video->pm_nb); + error = register_pm_notifier(&video->pm_nb); + if (error) + goto err_unregister_input_dev; return 0; - err_free_input_dev: - input_free_device(input); + err_unregister_input_dev: + input_unregister_device(input); err_stop_video: acpi_video_bus_stop_devices(video); + err_free_input_dev: + input_free_device(input); + err_put_video: acpi_video_bus_put_devices(video); kfree(video->attached_array); err_free_video: diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index f3f0fe7..45d8097 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -23,7 +23,7 @@ * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) * are available, video.ko should be used to handle the device. * - * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, + * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop, * sony_acpi,... can take care about backlight brightness. * * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c index 6ff612d..2059ee4 100644 --- a/drivers/atm/eni.c +++ b/drivers/atm/eni.c @@ -19,7 +19,6 @@ #include <linux/atm_eni.h> #include <linux/bitops.h> #include <linux/slab.h> -#include <asm/system.h> #include <asm/io.h> #include <linux/atomic.h> #include <asm/uaccess.h> diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 5072f8a..86fed1b 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -49,7 +49,6 @@ #include <linux/bitops.h> #include <linux/slab.h> #include <asm/byteorder.h> -#include <asm/system.h> #include <asm/string.h> #include <asm/io.h> #include <linux/atomic.h> diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index b812103..75fd691 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c @@ -43,7 +43,6 @@ #include <linux/wait.h> #include <linux/slab.h> -#include <asm/system.h> #include <asm/io.h> #include <linux/atomic.h> #include <asm/uaccess.h> diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c index 487a547..45d5063 100644 --- a/drivers/atm/idt77105.c +++ b/drivers/atm/idt77105.c @@ -16,7 +16,6 @@ #include <linux/atm_idt77105.h> #include <linux/spinlock.h> #include <linux/slab.h> -#include <asm/system.h> #include <asm/param.h> #include <asm/uaccess.h> diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 9e373ba..d438601 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -56,7 +56,6 @@ #include <linux/interrupt.h> #include <linux/wait.h> #include <linux/slab.h> -#include <asm/system.h> #include <asm/io.h> #include <linux/atomic.h> #include <asm/uaccess.h> diff --git a/drivers/atm/suni.c b/drivers/atm/suni.c index 90f1ccc..0215934 100644 --- a/drivers/atm/suni.c +++ b/drivers/atm/suni.c @@ -22,7 +22,6 @@ #include <linux/capability.h> #include <linux/atm_suni.h> #include <linux/slab.h> -#include <asm/system.h> #include <asm/param.h> #include <asm/uaccess.h> #include <linux/atomic.h> diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index d889f56..abe4e20 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -24,7 +24,6 @@ #include <linux/wait.h> #include <linux/slab.h> #include <asm/byteorder.h> -#include <asm/system.h> #include <asm/string.h> #include <asm/io.h> #include <linux/atomic.h> diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index e38ad24..07cbbc6 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -71,7 +71,7 @@ static inline int is_dma_buf_file(struct file *file) * ops, or error in allocating struct dma_buf, will return negative error. * */ -struct dma_buf *dma_buf_export(void *priv, struct dma_buf_ops *ops, +struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, size_t size, int flags) { struct dma_buf *dmabuf; @@ -80,7 +80,9 @@ struct dma_buf *dma_buf_export(void *priv, struct dma_buf_ops *ops, if (WARN_ON(!priv || !ops || !ops->map_dma_buf || !ops->unmap_dma_buf - || !ops->release)) { + || !ops->release + || !ops->kmap_atomic + || !ops->kmap)) { return ERR_PTR(-EINVAL); } @@ -107,17 +109,18 @@ EXPORT_SYMBOL_GPL(dma_buf_export); /** * dma_buf_fd - returns a file descriptor for the given dma_buf * @dmabuf: [in] pointer to dma_buf for which fd is required. + * @flags: [in] flags to give to fd * * On success, returns an associated 'fd'. Else, returns error. */ -int dma_buf_fd(struct dma_buf *dmabuf) +int dma_buf_fd(struct dma_buf *dmabuf, int flags) { int error, fd; if (!dmabuf || !dmabuf->file) return -EINVAL; - error = get_unused_fd(); + error = get_unused_fd_flags(flags); if (error < 0) return error; fd = error; @@ -185,17 +188,18 @@ struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach; int ret; - if (WARN_ON(!dmabuf || !dev || !dmabuf->ops)) + if (WARN_ON(!dmabuf || !dev)) return ERR_PTR(-EINVAL); attach = kzalloc(sizeof(struct dma_buf_attachment), GFP_KERNEL); if (attach == NULL) - goto err_alloc; - - mutex_lock(&dmabuf->lock); + return ERR_PTR(-ENOMEM); attach->dev = dev; attach->dmabuf = dmabuf; + + mutex_lock(&dmabuf->lock); + if (dmabuf->ops->attach) { ret = dmabuf->ops->attach(dmabuf, dev, attach); if (ret) @@ -206,8 +210,6 @@ struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, mutex_unlock(&dmabuf->lock); return attach; -err_alloc: - return ERR_PTR(-ENOMEM); err_attach: kfree(attach); mutex_unlock(&dmabuf->lock); @@ -224,7 +226,7 @@ EXPORT_SYMBOL_GPL(dma_buf_attach); */ void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach) { - if (WARN_ON(!dmabuf || !attach || !dmabuf->ops)) + if (WARN_ON(!dmabuf || !attach)) return; mutex_lock(&dmabuf->lock); @@ -255,13 +257,10 @@ struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *attach, might_sleep(); - if (WARN_ON(!attach || !attach->dmabuf || !attach->dmabuf->ops)) + if (WARN_ON(!attach || !attach->dmabuf)) return ERR_PTR(-EINVAL); - mutex_lock(&attach->dmabuf->lock); - if (attach->dmabuf->ops->map_dma_buf) - sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction); - mutex_unlock(&attach->dmabuf->lock); + sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction); return sg_table; } @@ -273,19 +272,137 @@ EXPORT_SYMBOL_GPL(dma_buf_map_attachment); * dma_buf_ops. * @attach: [in] attachment to unmap buffer from * @sg_table: [in] scatterlist info of the buffer to unmap + * @direction: [in] direction of DMA transfer * */ void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, - struct sg_table *sg_table) + struct sg_table *sg_table, + enum dma_data_direction direction) { - if (WARN_ON(!attach || !attach->dmabuf || !sg_table - || !attach->dmabuf->ops)) + if (WARN_ON(!attach || !attach->dmabuf || !sg_table)) return; - mutex_lock(&attach->dmabuf->lock); - if (attach->dmabuf->ops->unmap_dma_buf) - attach->dmabuf->ops->unmap_dma_buf(attach, sg_table); - mutex_unlock(&attach->dmabuf->lock); - + attach->dmabuf->ops->unmap_dma_buf(attach, sg_table, + direction); } EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment); + + +/** + * dma_buf_begin_cpu_access - Must be called before accessing a dma_buf from the + * cpu in the kernel context. Calls begin_cpu_access to allow exporter-specific + * preparations. Coherency is only guaranteed in the specified range for the + * specified access direction. + * @dma_buf: [in] buffer to prepare cpu access for. + * @start: [in] start of range for cpu access. + * @len: [in] length of range for cpu access. + * @direction: [in] length of range for cpu access. + * + * Can return negative error values, returns 0 on success. + */ +int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, size_t start, size_t len, + enum dma_data_direction direction) +{ + int ret = 0; + + if (WARN_ON(!dmabuf)) + return -EINVAL; + + if (dmabuf->ops->begin_cpu_access) + ret = dmabuf->ops->begin_cpu_access(dmabuf, start, len, direction); + + return ret; +} +EXPORT_SYMBOL_GPL(dma_buf_begin_cpu_access); + +/** + * dma_buf_end_cpu_access - Must be called after accessing a dma_buf from the + * cpu in the kernel context. Calls end_cpu_access to allow exporter-specific + * actions. Coherency is only guaranteed in the specified range for the + * specified access direction. + * @dma_buf: [in] buffer to complete cpu access for. + * @start: [in] start of range for cpu access. + * @len: [in] length of range for cpu access. + * @direction: [in] length of range for cpu access. + * + * This call must always succeed. + */ +void dma_buf_end_cpu_access(struct dma_buf *dmabuf, size_t start, size_t len, + enum dma_data_direction direction) +{ + WARN_ON(!dmabuf); + + if (dmabuf->ops->end_cpu_access) + dmabuf->ops->end_cpu_access(dmabuf, start, len, direction); +} +EXPORT_SYMBOL_GPL(dma_buf_end_cpu_access); + +/** + * dma_buf_kmap_atomic - Map a page of the buffer object into kernel address + * space. The same restrictions as for kmap_atomic and friends apply. + * @dma_buf: [in] buffer to map page from. + * @page_num: [in] page in PAGE_SIZE units to map. + * + * This call must always succeed, any necessary preparations that might fail + * need to be done in begin_cpu_access. + */ +void *dma_buf_kmap_atomic(struct dma_buf *dmabuf, unsigned long page_num) +{ + WARN_ON(!dmabuf); + + return dmabuf->ops->kmap_atomic(dmabuf, page_num); +} +EXPORT_SYMBOL_GPL(dma_buf_kmap_atomic); + +/** + * dma_buf_kunmap_atomic - Unmap a page obtained by dma_buf_kmap_atomic. + * @dma_buf: [in] buffer to unmap page from. + * @page_num: [in] page in PAGE_SIZE units to unmap. + * @vaddr: [in] kernel space pointer obtained from dma_buf_kmap_atomic. + * + * This call must always succeed. + */ +void dma_buf_kunmap_atomic(struct dma_buf *dmabuf, unsigned long page_num, + void *vaddr) +{ + WARN_ON(!dmabuf); + + if (dmabuf->ops->kunmap_atomic) + dmabuf->ops->kunmap_atomic(dmabuf, page_num, vaddr); +} +EXPORT_SYMBOL_GPL(dma_buf_kunmap_atomic); + +/** + * dma_buf_kmap - Map a page of the buffer object into kernel address space. The + * same restrictions as for kmap and friends apply. + * @dma_buf: [in] buffer to map page from. + * @page_num: [in] page in PAGE_SIZE units to map. + * + * This call must always succeed, any necessary preparations that might fail + * need to be done in begin_cpu_access. + */ +void *dma_buf_kmap(struct dma_buf *dmabuf, unsigned long page_num) +{ + WARN_ON(!dmabuf); + + return dmabuf->ops->kmap(dmabuf, page_num); +} +EXPORT_SYMBOL_GPL(dma_buf_kmap); + +/** + * dma_buf_kunmap - Unmap a page obtained by dma_buf_kmap. + * @dma_buf: [in] buffer to unmap page from. + * @page_num: [in] page in PAGE_SIZE units to unmap. + * @vaddr: [in] kernel space pointer obtained from dma_buf_kmap. + * + * This call must always succeed. + */ +void dma_buf_kunmap(struct dma_buf *dmabuf, unsigned long page_num, + void *vaddr) +{ + WARN_ON(!dmabuf); + + if (dmabuf->ops->kunmap) + dmabuf->ops->kunmap(dmabuf, page_num, vaddr); +} +EXPORT_SYMBOL_GPL(dma_buf_kunmap); diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 744f078..76a0823 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -202,7 +202,6 @@ static int slow_floppy; #include <asm/dma.h> #include <asm/irq.h> -#include <asm/system.h> static int FLOPPY_IRQ = 6; static int FLOPPY_DMA = 2; diff --git a/drivers/block/hd.c b/drivers/block/hd.c index b52c9ca..bf397bf 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -44,7 +44,6 @@ #define HD_IRQ 14 #define REALLY_SLOW_IO -#include <asm/system.h> #include <asm/io.h> #include <asm/uaccess.h> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index c3f0ee1..061427a 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -34,12 +34,11 @@ #include <linux/kthread.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/types.h> #include <linux/nbd.h> -#define LO_MAGIC 0x68797548 +#define NBD_MAGIC 0x68797548 #ifdef NDEBUG #define dprintk(flags, fmt...) @@ -116,7 +115,7 @@ static void nbd_end_request(struct request *req) spin_unlock_irqrestore(q->queue_lock, flags); } -static void sock_shutdown(struct nbd_device *lo, int lock) +static void sock_shutdown(struct nbd_device *nbd, int lock) { /* Forcibly shutdown the socket causing all listeners * to error @@ -125,14 +124,14 @@ static void sock_shutdown(struct nbd_device *lo, int lock) * there should be a more generic interface rather than * calling socket ops directly here */ if (lock) - mutex_lock(&lo->tx_lock); - if (lo->sock) { - dev_warn(disk_to_dev(lo->disk), "shutting down socket\n"); - kernel_sock_shutdown(lo->sock, SHUT_RDWR); - lo->sock = NULL; + mutex_lock(&nbd->tx_lock); + if (nbd->sock) { + dev_warn(disk_to_dev(nbd->disk), "shutting down socket\n"); + kernel_sock_shutdown(nbd->sock, SHUT_RDWR); + nbd->sock = NULL; } if (lock) - mutex_unlock(&lo->tx_lock); + mutex_unlock(&nbd->tx_lock); } static void nbd_xmit_timeout(unsigned long arg) @@ -147,17 +146,17 @@ static void nbd_xmit_timeout(unsigned long arg) /* * Send or receive packet. */ -static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size, +static int sock_xmit(struct nbd_device *nbd, int send, void *buf, int size, int msg_flags) { - struct socket *sock = lo->sock; + struct socket *sock = nbd->sock; int result; struct msghdr msg; struct kvec iov; sigset_t blocked, oldset; if (unlikely(!sock)) { - dev_err(disk_to_dev(lo->disk), + dev_err(disk_to_dev(nbd->disk), "Attempted %s on closed socket in sock_xmit\n", (send ? "send" : "recv")); return -EINVAL; @@ -181,15 +180,15 @@ static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size, if (send) { struct timer_list ti; - if (lo->xmit_timeout) { + if (nbd->xmit_timeout) { init_timer(&ti); ti.function = nbd_xmit_timeout; ti.data = (unsigned long)current; - ti.expires = jiffies + lo->xmit_timeout; + ti.expires = jiffies + nbd->xmit_timeout; add_timer(&ti); } result = kernel_sendmsg(sock, &msg, &iov, 1, size); - if (lo->xmit_timeout) + if (nbd->xmit_timeout) del_timer_sync(&ti); } else result = kernel_recvmsg(sock, &msg, &iov, 1, size, @@ -201,7 +200,7 @@ static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size, task_pid_nr(current), current->comm, dequeue_signal_lock(current, ¤t->blocked, &info)); result = -EINTR; - sock_shutdown(lo, !send); + sock_shutdown(nbd, !send); break; } @@ -219,18 +218,19 @@ static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size, return result; } -static inline int sock_send_bvec(struct nbd_device *lo, struct bio_vec *bvec, +static inline int sock_send_bvec(struct nbd_device *nbd, struct bio_vec *bvec, int flags) { int result; void *kaddr = kmap(bvec->bv_page); - result = sock_xmit(lo, 1, kaddr + bvec->bv_offset, bvec->bv_len, flags); + result = sock_xmit(nbd, 1, kaddr + bvec->bv_offset, + bvec->bv_len, flags); kunmap(bvec->bv_page); return result; } /* always call with the tx_lock held */ -static int nbd_send_req(struct nbd_device *lo, struct request *req) +static int nbd_send_req(struct nbd_device *nbd, struct request *req) { int result, flags; struct nbd_request request; @@ -243,14 +243,14 @@ static int nbd_send_req(struct nbd_device *lo, struct request *req) memcpy(request.handle, &req, sizeof(req)); dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%uB)\n", - lo->disk->disk_name, req, + nbd->disk->disk_name, req, nbdcmd_to_ascii(nbd_cmd(req)), (unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req)); - result = sock_xmit(lo, 1, &request, sizeof(request), + result = sock_xmit(nbd, 1, &request, sizeof(request), (nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0); if (result <= 0) { - dev_err(disk_to_dev(lo->disk), + dev_err(disk_to_dev(nbd->disk), "Send control failed (result %d)\n", result); goto error_out; } @@ -267,10 +267,10 @@ static int nbd_send_req(struct nbd_device *lo, struct request *req) if (!rq_iter_last(req, iter)) flags = MSG_MORE; dprintk(DBG_TX, "%s: request %p: sending %d bytes data\n", - lo->disk->disk_name, req, bvec->bv_len); - result = sock_send_bvec(lo, bvec, flags); + nbd->disk->disk_name, req, bvec->bv_len); + result = sock_send_bvec(nbd, bvec, flags); if (result <= 0) { - dev_err(disk_to_dev(lo->disk), + dev_err(disk_to_dev(nbd->disk), "Send data failed (result %d)\n", result); goto error_out; @@ -283,25 +283,25 @@ error_out: return -EIO; } -static struct request *nbd_find_request(struct nbd_device *lo, +static struct request *nbd_find_request(struct nbd_device *nbd, struct request *xreq) { struct request *req, *tmp; int err; - err = wait_event_interruptible(lo->active_wq, lo->active_req != xreq); + err = wait_event_interruptible(nbd->active_wq, nbd->active_req != xreq); if (unlikely(err)) goto out; - spin_lock(&lo->queue_lock); - list_for_each_entry_safe(req, tmp, &lo->queue_head, queuelist) { + spin_lock(&nbd->queue_lock); + list_for_each_entry_safe(req, tmp, &nbd->queue_head, queuelist) { if (req != xreq) continue; list_del_init(&req->queuelist); - spin_unlock(&lo->queue_lock); + spin_unlock(&nbd->queue_lock); return req; } - spin_unlock(&lo->queue_lock); + spin_unlock(&nbd->queue_lock); err = -ENOENT; @@ -309,78 +309,78 @@ out: return ERR_PTR(err); } -static inline int sock_recv_bvec(struct nbd_device *lo, struct bio_vec *bvec) +static inline int sock_recv_bvec(struct nbd_device *nbd, struct bio_vec *bvec) { int result; void *kaddr = kmap(bvec->bv_page); - result = sock_xmit(lo, 0, kaddr + bvec->bv_offset, bvec->bv_len, + result = sock_xmit(nbd, 0, kaddr + bvec->bv_offset, bvec->bv_len, MSG_WAITALL); kunmap(bvec->bv_page); return result; } /* NULL returned = something went wrong, inform userspace */ -static struct request *nbd_read_stat(struct nbd_device *lo) +static struct request *nbd_read_stat(struct nbd_device *nbd) { int result; struct nbd_reply reply; struct request *req; reply.magic = 0; - result = sock_xmit(lo, 0, &reply, sizeof(reply), MSG_WAITALL); + result = sock_xmit(nbd, 0, &reply, sizeof(reply), MSG_WAITALL); if (result <= 0) { - dev_err(disk_to_dev(lo->disk), + dev_err(disk_to_dev(nbd->disk), "Receive control failed (result %d)\n", result); goto harderror; } if (ntohl(reply.magic) != NBD_REPLY_MAGIC) { - dev_err(disk_to_dev(lo->disk), "Wrong magic (0x%lx)\n", + dev_err(disk_to_dev(nbd->disk), "Wrong magic (0x%lx)\n", (unsigned long)ntohl(reply.magic)); result = -EPROTO; goto harderror; } - req = nbd_find_request(lo, *(struct request **)reply.handle); + req = nbd_find_request(nbd, *(struct request **)reply.handle); if (IS_ERR(req)) { result = PTR_ERR(req); if (result != -ENOENT) goto harderror; - dev_err(disk_to_dev(lo->disk), "Unexpected reply (%p)\n", + dev_err(disk_to_dev(nbd->disk), "Unexpected reply (%p)\n", reply.handle); result = -EBADR; goto harderror; } if (ntohl(reply.error)) { - dev_err(disk_to_dev(lo->disk), "Other side returned error (%d)\n", + dev_err(disk_to_dev(nbd->disk), "Other side returned error (%d)\n", ntohl(reply.error)); req->errors++; return req; } dprintk(DBG_RX, "%s: request %p: got reply\n", - lo->disk->disk_name, req); + nbd->disk->disk_name, req); if (nbd_cmd(req) == NBD_CMD_READ) { struct req_iterator iter; struct bio_vec *bvec; rq_for_each_segment(bvec, req, iter) { - result = sock_recv_bvec(lo, bvec); + result = sock_recv_bvec(nbd, bvec); if (result <= 0) { - dev_err(disk_to_dev(lo->disk), "Receive data failed (result %d)\n", + dev_err(disk_to_dev(nbd->disk), "Receive data failed (result %d)\n", result); req->errors++; return req; } dprintk(DBG_RX, "%s: request %p: got %d bytes data\n", - lo->disk->disk_name, req, bvec->bv_len); + nbd->disk->disk_name, req, bvec->bv_len); } } return req; harderror: - lo->harderror = result; + nbd->harderror = result; return NULL; } @@ -398,48 +398,48 @@ static struct device_attribute pid_attr = { .show = pid_show, }; -static int nbd_do_it(struct nbd_device *lo) +static int nbd_do_it(struct nbd_device *nbd) { struct request *req; int ret; - BUG_ON(lo->magic != LO_MAGIC); + BUG_ON(nbd->magic != NBD_MAGIC); - lo->pid = task_pid_nr(current); - ret = device_create_file(disk_to_dev(lo->disk), &pid_attr); + nbd->pid = task_pid_nr(current); + ret = device_create_file(disk_to_dev(nbd->disk), &pid_attr); if (ret) { - dev_err(disk_to_dev(lo->disk), "device_create_file failed!\n"); - lo->pid = 0; + dev_err(disk_to_dev(nbd->disk), "device_create_file failed!\n"); + nbd->pid = 0; return ret; } - while ((req = nbd_read_stat(lo)) != NULL) + while ((req = nbd_read_stat(nbd)) != NULL) nbd_end_request(req); - device_remove_file(disk_to_dev(lo->disk), &pid_attr); - lo->pid = 0; + device_remove_file(disk_to_dev(nbd->disk), &pid_attr); + nbd->pid = 0; return 0; } -static void nbd_clear_que(struct nbd_device *lo) +static void nbd_clear_que(struct nbd_device *nbd) { struct request *req; - BUG_ON(lo->magic != LO_MAGIC); + BUG_ON(nbd->magic != NBD_MAGIC); /* - * Because we have set lo->sock to NULL under the tx_lock, all + * Because we have set nbd->sock to NULL under the tx_lock, all * modifications to the list must have completed by now. For * the same reason, the active_req must be NULL. * * As a consequence, we don't need to take the spin lock while * purging the list here. */ - BUG_ON(lo->sock); - BUG_ON(lo->active_req); + BUG_ON(nbd->sock); + BUG_ON(nbd->active_req); - while (!list_empty(&lo->queue_head)) { - req = list_entry(lo->queue_head.next, struct request, + while (!list_empty(&nbd->queue_head)) { + req = list_entry(nbd->queue_head.next, struct request, queuelist); list_del_init(&req->queuelist); req->errors++; @@ -448,7 +448,7 @@ static void nbd_clear_que(struct nbd_device *lo) } -static void nbd_handle_req(struct nbd_device *lo, struct request *req) +static void nbd_handle_req(struct nbd_device *nbd, struct request *req) { if (req->cmd_type != REQ_TYPE_FS) goto error_out; @@ -456,8 +456,8 @@ static void nbd_handle_req(struct nbd_device *lo, struct request *req) nbd_cmd(req) = NBD_CMD_READ; if (rq_data_dir(req) == WRITE) { nbd_cmd(req) = NBD_CMD_WRITE; - if (lo->flags & NBD_READ_ONLY) { - dev_err(disk_to_dev(lo->disk), + if (nbd->flags & NBD_READ_ONLY) { + dev_err(disk_to_dev(nbd->disk), "Write on read-only\n"); goto error_out; } @@ -465,29 +465,29 @@ static void nbd_handle_req(struct nbd_device *lo, struct request *req) req->errors = 0; - mutex_lock(&lo->tx_lock); - if (unlikely(!lo->sock)) { - mutex_unlock(&lo->tx_lock); - dev_err(disk_to_dev(lo->disk), + mutex_lock(&nbd->tx_lock); + if (unlikely(!nbd->sock)) { + mutex_unlock(&nbd->tx_lock); + dev_err(disk_to_dev(nbd->disk), "Attempted send on closed socket\n"); goto error_out; } - lo->active_req = req; + nbd->active_req = req; - if (nbd_send_req(lo, req) != 0) { - dev_err(disk_to_dev(lo->disk), "Request send failed\n"); + if (nbd_send_req(nbd, req) != 0) { + dev_err(disk_to_dev(nbd->disk), "Request send failed\n"); req->errors++; nbd_end_request(req); } else { - spin_lock(&lo->queue_lock); - list_add(&req->queuelist, &lo->queue_head); - spin_unlock(&lo->queue_lock); + spin_lock(&nbd->queue_lock); + list_add(&req->queuelist, &nbd->queue_head); + spin_unlock(&nbd->queue_lock); } - lo->active_req = NULL; - mutex_unlock(&lo->tx_lock); - wake_up_all(&lo->active_wq); + nbd->active_req = NULL; + mutex_unlock(&nbd->tx_lock); + wake_up_all(&nbd->active_wq); return; @@ -498,28 +498,28 @@ error_out: static int nbd_thread(void *data) { - struct nbd_device *lo = data; + struct nbd_device *nbd = data; struct request *req; set_user_nice(current, -20); - while (!kthread_should_stop() || !list_empty(&lo->waiting_queue)) { + while (!kthread_should_stop() || !list_empty(&nbd->waiting_queue)) { /* wait for something to do */ - wait_event_interruptible(lo->waiting_wq, + wait_event_interruptible(nbd->waiting_wq, kthread_should_stop() || - !list_empty(&lo->waiting_queue)); + !list_empty(&nbd->waiting_queue)); /* extract request */ - if (list_empty(&lo->waiting_queue)) + if (list_empty(&nbd->waiting_queue)) continue; - spin_lock_irq(&lo->queue_lock); - req = list_entry(lo->waiting_queue.next, struct request, + spin_lock_irq(&nbd->queue_lock); + req = list_entry(nbd->waiting_queue.next, struct request, queuelist); list_del_init(&req->queuelist); - spin_unlock_irq(&lo->queue_lock); + spin_unlock_irq(&nbd->queue_lock); /* handle request */ - nbd_handle_req(lo, req); + nbd_handle_req(nbd, req); } return 0; } @@ -527,7 +527,7 @@ static int nbd_thread(void *data) /* * We always wait for result of write, for now. It would be nice to make it optional * in future - * if ((rq_data_dir(req) == WRITE) && (lo->flags & NBD_WRITE_NOCHK)) + * if ((rq_data_dir(req) == WRITE) && (nbd->flags & NBD_WRITE_NOCHK)) * { printk( "Warning: Ignoring result!\n"); nbd_end_request( req ); } */ @@ -536,19 +536,19 @@ static void do_nbd_request(struct request_queue *q) struct request *req; while ((req = blk_fetch_request(q)) != NULL) { - struct nbd_device *lo; + struct nbd_device *nbd; spin_unlock_irq(q->queue_lock); dprintk(DBG_BLKDEV, "%s: request %p: dequeued (flags=%x)\n", req->rq_disk->disk_name, req, req->cmd_type); - lo = req->rq_disk->private_data; + nbd = req->rq_disk->private_data; - BUG_ON(lo->magic != LO_MAGIC); + BUG_ON(nbd->magic != NBD_MAGIC); - if (unlikely(!lo->sock)) { - dev_err(disk_to_dev(lo->disk), + if (unlikely(!nbd->sock)) { + dev_err(disk_to_dev(nbd->disk), "Attempted send on closed socket\n"); req->errors++; nbd_end_request(req); @@ -556,11 +556,11 @@ static void do_nbd_request(struct request_queue *q) continue; } - spin_lock_irq(&lo->queue_lock); - list_add_tail(&req->queuelist, &lo->waiting_queue); - spin_unlock_irq(&lo->queue_lock); + spin_lock_irq(&nbd->queue_lock); + list_add_tail(&req->queuelist, &nbd->waiting_queue); + spin_unlock_irq(&nbd->queue_lock); - wake_up(&lo->waiting_wq); + wake_up(&nbd->waiting_wq); spin_lock_irq(q->queue_lock); } @@ -568,32 +568,32 @@ static void do_nbd_request(struct request_queue *q) /* Must be called with tx_lock held */ -static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo, +static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, unsigned int cmd, unsigned long arg) { switch (cmd) { case NBD_DISCONNECT: { struct request sreq; - dev_info(disk_to_dev(lo->disk), "NBD_DISCONNECT\n"); + dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n"); blk_rq_init(NULL, &sreq); sreq.cmd_type = REQ_TYPE_SPECIAL; nbd_cmd(&sreq) = NBD_CMD_DISC; - if (!lo->sock) + if (!nbd->sock) return -EINVAL; - nbd_send_req(lo, &sreq); + nbd_send_req(nbd, &sreq); return 0; } case NBD_CLEAR_SOCK: { struct file *file; - lo->sock = NULL; - file = lo->file; - lo->file = NULL; - nbd_clear_que(lo); - BUG_ON(!list_empty(&lo->queue_head)); + nbd->sock = NULL; + file = nbd->file; + nbd->file = NULL; + nbd_clear_que(nbd); + BUG_ON(!list_empty(&nbd->queue_head)); if (file) fput(file); return 0; @@ -601,14 +601,14 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo, case NBD_SET_SOCK: { struct file *file; - if (lo->file) + if (nbd->file) return -EBUSY; file = fget(arg); if (file) { struct inode *inode = file->f_path.dentry->d_inode; if (S_ISSOCK(inode->i_mode)) { - lo->file = file; - lo->sock = SOCKET_I(inode); + nbd->file = file; + nbd->sock = SOCKET_I(inode); if (max_part > 0) bdev->bd_invalidated = 1; return 0; @@ -620,29 +620,29 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo, } case NBD_SET_BLKSIZE: - lo->blksize = arg; - lo->bytesize &= ~(lo->blksize-1); - bdev->bd_inode->i_size = lo->bytesize; - set_blocksize(bdev, lo->blksize); - set_capacity(lo->disk, lo->bytesize >> 9); + nbd->blksize = arg; + nbd->bytesize &= ~(nbd->blksize-1); + bdev->bd_inode->i_size = nbd->bytesize; + set_blocksize(bdev, nbd->blksize); + set_capacity(nbd->disk, nbd->bytesize >> 9); return 0; case NBD_SET_SIZE: - lo->bytesize = arg & ~(lo->blksize-1); - bdev->bd_inode->i_size = lo->bytesize; - set_blocksize(bdev, lo->blksize); - set_capacity(lo->disk, lo->bytesize >> 9); + nbd->bytesize = arg & ~(nbd->blksize-1); + bdev->bd_inode->i_size = nbd->bytesize; + set_blocksize(bdev, nbd->blksize); + set_capacity(nbd->disk, nbd->bytesize >> 9); return 0; case NBD_SET_TIMEOUT: - lo->xmit_timeout = arg * HZ; + nbd->xmit_timeout = arg * HZ; return 0; case NBD_SET_SIZE_BLOCKS: - lo->bytesize = ((u64) arg) * lo->blksize; - bdev->bd_inode->i_size = lo->bytesize; - set_blocksize(bdev, lo->blksize); - set_capacity(lo->disk, lo->bytesize >> 9); + nbd->bytesize = ((u64) arg) * nbd->blksize; + bdev->bd_inode->i_size = nbd->bytesize; + set_blocksize(bdev, nbd->blksize); + set_capacity(nbd->disk, nbd->bytesize >> 9); return 0; case NBD_DO_IT: { @@ -650,38 +650,38 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo, struct file *file; int error; - if (lo->pid) + if (nbd->pid) return -EBUSY; - if (!lo->file) + if (!nbd->file) return -EINVAL; - mutex_unlock(&lo->tx_lock); + mutex_unlock(&nbd->tx_lock); - thread = kthread_create(nbd_thread, lo, lo->disk->disk_name); + thread = kthread_create(nbd_thread, nbd, nbd->disk->disk_name); if (IS_ERR(thread)) { - mutex_lock(&lo->tx_lock); + mutex_lock(&nbd->tx_lock); return PTR_ERR(thread); } wake_up_process(thread); - error = nbd_do_it(lo); + error = nbd_do_it(nbd); kthread_stop(thread); - mutex_lock(&lo->tx_lock); + mutex_lock(&nbd->tx_lock); if (error) return error; - sock_shutdown(lo, 0); - file = lo->file; - lo->file = NULL; - nbd_clear_que(lo); - dev_warn(disk_to_dev(lo->disk), "queue cleared\n"); + sock_shutdown(nbd, 0); + file = nbd->file; + nbd->file = NULL; + nbd_clear_que(nbd); + dev_warn(disk_to_dev(nbd->disk), "queue cleared\n"); if (file) fput(file); - lo->bytesize = 0; + nbd->bytesize = 0; bdev->bd_inode->i_size = 0; - set_capacity(lo->disk, 0); + set_capacity(nbd->disk, 0); if (max_part > 0) ioctl_by_bdev(bdev, BLKRRPART, 0); - return lo->harderror; + return nbd->harderror; } case NBD_CLEAR_QUE: @@ -689,14 +689,14 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo, * This is for compatibility only. The queue is always cleared * by NBD_DO_IT or NBD_CLEAR_SOCK. */ - BUG_ON(!lo->sock && !list_empty(&lo->queue_head)); + BUG_ON(!nbd->sock && !list_empty(&nbd->queue_head)); return 0; case NBD_PRINT_DEBUG: - dev_info(disk_to_dev(lo->disk), + dev_info(disk_to_dev(nbd->disk), "next = %p, prev = %p, head = %p\n", - lo->queue_head.next, lo->queue_head.prev, - &lo->queue_head); + nbd->queue_head.next, nbd->queue_head.prev, + &nbd->queue_head); return 0; } return -ENOTTY; @@ -705,21 +705,21 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo, static int nbd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) { - struct nbd_device *lo = bdev->bd_disk->private_data; + struct nbd_device *nbd = bdev->bd_disk->private_data; int error; if (!capable(CAP_SYS_ADMIN)) return -EPERM; - BUG_ON(lo->magic != LO_MAGIC); + BUG_ON(nbd->magic != NBD_MAGIC); /* Anyone capable of this syscall can do *real bad* things */ dprintk(DBG_IOCTL, "%s: nbd_ioctl cmd=%s(0x%x) arg=%lu\n", - lo->disk->disk_name, ioctl_cmd_to_ascii(cmd), cmd, arg); + nbd->disk->disk_name, ioctl_cmd_to_ascii(cmd), cmd, arg); - mutex_lock(&lo->tx_lock); - error = __nbd_ioctl(bdev, lo, cmd, arg); - mutex_unlock(&lo->tx_lock); + mutex_lock(&nbd->tx_lock); + error = __nbd_ioctl(bdev, nbd, cmd, arg); + mutex_unlock(&nbd->tx_lock); return error; } @@ -805,7 +805,7 @@ static int __init nbd_init(void) for (i = 0; i < nbds_max; i++) { struct gendisk *disk = nbd_dev[i].disk; nbd_dev[i].file = NULL; - nbd_dev[i].magic = LO_MAGIC; + nbd_dev[i].magic = NBD_MAGIC; nbd_dev[i].flags = 0; INIT_LIST_HEAD(&nbd_dev[i].waiting_queue); spin_lock_init(&nbd_dev[i].queue_lock); diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a6278e7..013c7a5 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -41,19 +41,35 @@ #include "rbd_types.h" -#define DRV_NAME "rbd" -#define DRV_NAME_LONG "rbd (rados block device)" +/* + * The basic unit of block I/O is a sector. It is interpreted in a + * number of contexts in Linux (blk, bio, genhd), but the default is + * universally 512 bytes. These symbols are just slightly more + * meaningful than the bare numbers they represent. + */ +#define SECTOR_SHIFT 9 +#define SECTOR_SIZE (1ULL << SECTOR_SHIFT) + +#define RBD_DRV_NAME "rbd" +#define RBD_DRV_NAME_LONG "rbd (rados block device)" #define RBD_MINORS_PER_MAJOR 256 /* max minors per blkdev */ -#define RBD_MAX_MD_NAME_LEN (96 + sizeof(RBD_SUFFIX)) +#define RBD_MAX_MD_NAME_LEN (RBD_MAX_OBJ_NAME_LEN + sizeof(RBD_SUFFIX)) #define RBD_MAX_POOL_NAME_LEN 64 #define RBD_MAX_SNAP_NAME_LEN 32 #define RBD_MAX_OPT_LEN 1024 #define RBD_SNAP_HEAD_NAME "-" +/* + * An RBD device name will be "rbd#", where the "rbd" comes from + * RBD_DRV_NAME above, and # is a unique integer identifier. + * MAX_INT_FORMAT_WIDTH is used in ensuring DEV_NAME_LEN is big + * enough to hold all possible device names. + */ #define DEV_NAME_LEN 32 +#define MAX_INT_FORMAT_WIDTH ((5 * sizeof (int)) / 2 + 1) #define RBD_NOTIFY_TIMEOUT_DEFAULT 10 @@ -66,7 +82,6 @@ struct rbd_image_header { __u8 obj_order; __u8 crypt_type; __u8 comp_type; - struct rw_semaphore snap_rwsem; struct ceph_snap_context *snapc; size_t snap_names_len; u64 snap_seq; @@ -83,7 +98,7 @@ struct rbd_options { }; /* - * an instance of the client. multiple devices may share a client. + * an instance of the client. multiple devices may share an rbd client. */ struct rbd_client { struct ceph_client *client; @@ -92,20 +107,9 @@ struct rbd_client { struct list_head node; }; -struct rbd_req_coll; - /* - * a single io request + * a request completion status */ -struct rbd_request { - struct request *rq; /* blk layer request */ - struct bio *bio; /* cloned bio */ - struct page **pages; /* list of used pages */ - u64 len; - int coll_index; - struct rbd_req_coll *coll; -}; - struct rbd_req_status { int done; int rc; @@ -122,6 +126,18 @@ struct rbd_req_coll { struct rbd_req_status status[0]; }; +/* + * a single io request + */ +struct rbd_request { + struct request *rq; /* blk layer request */ + struct bio *bio; /* cloned bio */ + struct page **pages; /* list of used pages */ + u64 len; + int coll_index; + struct rbd_req_coll *coll; +}; + struct rbd_snap { struct device dev; const char *name; @@ -140,7 +156,6 @@ struct rbd_device { struct gendisk *disk; /* blkdev's gendisk and rq */ struct request_queue *q; - struct ceph_client *client; struct rbd_client *rbd_client; char name[DEV_NAME_LEN]; /* blkdev name, e.g. rbd3 */ @@ -157,6 +172,8 @@ struct rbd_device { struct ceph_osd_event *watch_event; struct ceph_osd_request *watch_request; + /* protects updating the header */ + struct rw_semaphore header_rwsem; char snap_name[RBD_MAX_SNAP_NAME_LEN]; u32 cur_snap; /* index+1 of current snapshot within snap context 0 - for the head */ @@ -171,15 +188,13 @@ struct rbd_device { struct device dev; }; -static struct bus_type rbd_bus_type = { - .name = "rbd", -}; - -static spinlock_t node_lock; /* protects client get/put */ - static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */ + static LIST_HEAD(rbd_dev_list); /* devices */ -static LIST_HEAD(rbd_client_list); /* clients */ +static DEFINE_SPINLOCK(rbd_dev_list_lock); + +static LIST_HEAD(rbd_client_list); /* clients */ +static DEFINE_SPINLOCK(rbd_client_list_lock); static int __rbd_init_snaps_header(struct rbd_device *rbd_dev); static void rbd_dev_release(struct device *dev); @@ -190,12 +205,32 @@ static ssize_t rbd_snap_add(struct device *dev, static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev, struct rbd_snap *snap); +static ssize_t rbd_add(struct bus_type *bus, const char *buf, + size_t count); +static ssize_t rbd_remove(struct bus_type *bus, const char *buf, + size_t count); -static struct rbd_device *dev_to_rbd(struct device *dev) +static struct bus_attribute rbd_bus_attrs[] = { + __ATTR(add, S_IWUSR, NULL, rbd_add), + __ATTR(remove, S_IWUSR, NULL, rbd_remove), + __ATTR_NULL +}; + +static struct bus_type rbd_bus_type = { + .name = "rbd", + .bus_attrs = rbd_bus_attrs, +}; + +static void rbd_root_dev_release(struct device *dev) { - return container_of(dev, struct rbd_device, dev); } +static struct device rbd_root_dev = { + .init_name = "rbd", + .release = rbd_root_dev_release, +}; + + static struct device *rbd_get_dev(struct rbd_device *rbd_dev) { return get_device(&rbd_dev->dev); @@ -210,8 +245,7 @@ static int __rbd_update_snaps(struct rbd_device *rbd_dev); static int rbd_open(struct block_device *bdev, fmode_t mode) { - struct gendisk *disk = bdev->bd_disk; - struct rbd_device *rbd_dev = disk->private_data; + struct rbd_device *rbd_dev = bdev->bd_disk->private_data; rbd_get_dev(rbd_dev); @@ -256,9 +290,11 @@ static struct rbd_client *rbd_client_create(struct ceph_options *opt, kref_init(&rbdc->kref); INIT_LIST_HEAD(&rbdc->node); + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + rbdc->client = ceph_create_client(opt, rbdc, 0, 0); if (IS_ERR(rbdc->client)) - goto out_rbdc; + goto out_mutex; opt = NULL; /* Now rbdc->client is responsible for opt */ ret = ceph_open_session(rbdc->client); @@ -267,16 +303,19 @@ static struct rbd_client *rbd_client_create(struct ceph_options *opt, rbdc->rbd_opts = rbd_opts; - spin_lock(&node_lock); + spin_lock(&rbd_client_list_lock); list_add_tail(&rbdc->node, &rbd_client_list); - spin_unlock(&node_lock); + spin_unlock(&rbd_client_list_lock); + + mutex_unlock(&ctl_mutex); dout("rbd_client_create created %p\n", rbdc); return rbdc; out_err: ceph_destroy_client(rbdc->client); -out_rbdc: +out_mutex: + mutex_unlock(&ctl_mutex); kfree(rbdc); out_opt: if (opt) @@ -324,7 +363,7 @@ static int parse_rbd_opts_token(char *c, void *private) substring_t argstr[MAX_OPT_ARGS]; int token, intval, ret; - token = match_token((char *)c, rbdopt_tokens, argstr); + token = match_token(c, rbdopt_tokens, argstr); if (token < 0) return -EINVAL; @@ -357,58 +396,54 @@ static int parse_rbd_opts_token(char *c, void *private) * Get a ceph client with specific addr and configuration, if one does * not exist create it. */ -static int rbd_get_client(struct rbd_device *rbd_dev, const char *mon_addr, - char *options) +static struct rbd_client *rbd_get_client(const char *mon_addr, + size_t mon_addr_len, + char *options) { struct rbd_client *rbdc; struct ceph_options *opt; - int ret; struct rbd_options *rbd_opts; rbd_opts = kzalloc(sizeof(*rbd_opts), GFP_KERNEL); if (!rbd_opts) - return -ENOMEM; + return ERR_PTR(-ENOMEM); rbd_opts->notify_timeout = RBD_NOTIFY_TIMEOUT_DEFAULT; - ret = ceph_parse_options(&opt, options, mon_addr, - mon_addr + strlen(mon_addr), parse_rbd_opts_token, rbd_opts); - if (ret < 0) - goto done_err; + opt = ceph_parse_options(options, mon_addr, + mon_addr + mon_addr_len, + parse_rbd_opts_token, rbd_opts); + if (IS_ERR(opt)) { + kfree(rbd_opts); + return ERR_CAST(opt); + } - spin_lock(&node_lock); + spin_lock(&rbd_client_list_lock); rbdc = __rbd_client_find(opt); if (rbdc) { + /* using an existing client */ + kref_get(&rbdc->kref); + spin_unlock(&rbd_client_list_lock); + ceph_destroy_options(opt); kfree(rbd_opts); - /* using an existing client */ - kref_get(&rbdc->kref); - rbd_dev->rbd_client = rbdc; - rbd_dev->client = rbdc->client; - spin_unlock(&node_lock); - return 0; + return rbdc; } - spin_unlock(&node_lock); + spin_unlock(&rbd_client_list_lock); rbdc = rbd_client_create(opt, rbd_opts); - if (IS_ERR(rbdc)) { - ret = PTR_ERR(rbdc); - goto done_err; - } - rbd_dev->rbd_client = rbdc; - rbd_dev->client = rbdc->client; - return 0; -done_err: - kfree(rbd_opts); - return ret; + if (IS_ERR(rbdc)) + kfree(rbd_opts); + + return rbdc; } /* * Destroy ceph client * - * Caller must hold node_lock. + * Caller must hold rbd_client_list_lock. */ static void rbd_client_release(struct kref *kref) { @@ -428,11 +463,10 @@ static void rbd_client_release(struct kref *kref) */ static void rbd_put_client(struct rbd_device *rbd_dev) { - spin_lock(&node_lock); + spin_lock(&rbd_client_list_lock); kref_put(&rbd_dev->rbd_client->kref, rbd_client_release); - spin_unlock(&node_lock); + spin_unlock(&rbd_client_list_lock); rbd_dev->rbd_client = NULL; - rbd_dev->client = NULL; } /* @@ -457,21 +491,19 @@ static int rbd_header_from_disk(struct rbd_image_header *header, gfp_t gfp_flags) { int i; - u32 snap_count = le32_to_cpu(ondisk->snap_count); - int ret = -ENOMEM; + u32 snap_count; - if (memcmp(ondisk, RBD_HEADER_TEXT, sizeof(RBD_HEADER_TEXT))) { + if (memcmp(ondisk, RBD_HEADER_TEXT, sizeof(RBD_HEADER_TEXT))) return -ENXIO; - } - init_rwsem(&header->snap_rwsem); - header->snap_names_len = le64_to_cpu(ondisk->snap_names_len); + snap_count = le32_to_cpu(ondisk->snap_count); header->snapc = kmalloc(sizeof(struct ceph_snap_context) + - snap_count * - sizeof(struct rbd_image_snap_ondisk), + snap_count * sizeof (*ondisk), gfp_flags); if (!header->snapc) return -ENOMEM; + + header->snap_names_len = le64_to_cpu(ondisk->snap_names_len); if (snap_count) { header->snap_names = kmalloc(header->snap_names_len, GFP_KERNEL); @@ -498,8 +530,7 @@ static int rbd_header_from_disk(struct rbd_image_header *header, header->snapc->num_snaps = snap_count; header->total_snaps = snap_count; - if (snap_count && - allocated_snaps == snap_count) { + if (snap_count && allocated_snaps == snap_count) { for (i = 0; i < snap_count; i++) { header->snapc->snaps[i] = le64_to_cpu(ondisk->snaps[i].id); @@ -518,7 +549,7 @@ err_names: kfree(header->snap_names); err_snapc: kfree(header->snapc); - return ret; + return -ENOMEM; } static int snap_index(struct rbd_image_header *header, int snap_num) @@ -542,35 +573,34 @@ static int snap_by_name(struct rbd_image_header *header, const char *snap_name, int i; char *p = header->snap_names; - for (i = 0; i < header->total_snaps; i++, p += strlen(p) + 1) { - if (strcmp(snap_name, p) == 0) - break; - } - if (i == header->total_snaps) - return -ENOENT; - if (seq) - *seq = header->snapc->snaps[i]; + for (i = 0; i < header->total_snaps; i++) { + if (!strcmp(snap_name, p)) { - if (size) - *size = header->snap_sizes[i]; + /* Found it. Pass back its id and/or size */ - return i; + if (seq) + *seq = header->snapc->snaps[i]; + if (size) + *size = header->snap_sizes[i]; + return i; + } + p += strlen(p) + 1; /* Skip ahead to the next name */ + } + return -ENOENT; } -static int rbd_header_set_snap(struct rbd_device *dev, - const char *snap_name, - u64 *size) +static int rbd_header_set_snap(struct rbd_device *dev, u64 *size) { struct rbd_image_header *header = &dev->header; struct ceph_snap_context *snapc = header->snapc; int ret = -ENOENT; - down_write(&header->snap_rwsem); + BUILD_BUG_ON(sizeof (dev->snap_name) < sizeof (RBD_SNAP_HEAD_NAME)); - if (!snap_name || - !*snap_name || - strcmp(snap_name, "-") == 0 || - strcmp(snap_name, RBD_SNAP_HEAD_NAME) == 0) { + down_write(&dev->header_rwsem); + + if (!memcmp(dev->snap_name, RBD_SNAP_HEAD_NAME, + sizeof (RBD_SNAP_HEAD_NAME))) { if (header->total_snaps) snapc->seq = header->snap_seq; else @@ -580,7 +610,7 @@ static int rbd_header_set_snap(struct rbd_device *dev, if (size) *size = header->image_size; } else { - ret = snap_by_name(header, snap_name, &snapc->seq, size); + ret = snap_by_name(header, dev->snap_name, &snapc->seq, size); if (ret < 0) goto done; @@ -590,7 +620,7 @@ static int rbd_header_set_snap(struct rbd_device *dev, ret = 0; done: - up_write(&header->snap_rwsem); + up_write(&dev->header_rwsem); return ret; } @@ -717,7 +747,7 @@ static struct bio *bio_chain_clone(struct bio **old, struct bio **next, /* split the bio. We'll release it either in the next call, or it will have to be released outside */ - bp = bio_split(old_chain, (len - total) / 512ULL); + bp = bio_split(old_chain, (len - total) / SECTOR_SIZE); if (!bp) goto err_out; @@ -857,7 +887,7 @@ static int rbd_do_request(struct request *rq, struct timespec mtime = CURRENT_TIME; struct rbd_request *req_data; struct ceph_osd_request_head *reqhead; - struct rbd_image_header *header = &dev->header; + struct ceph_osd_client *osdc; req_data = kzalloc(sizeof(*req_data), GFP_NOIO); if (!req_data) { @@ -874,15 +904,13 @@ static int rbd_do_request(struct request *rq, dout("rbd_do_request obj=%s ofs=%lld len=%lld\n", obj, len, ofs); - down_read(&header->snap_rwsem); + down_read(&dev->header_rwsem); - req = ceph_osdc_alloc_request(&dev->client->osdc, flags, - snapc, - ops, - false, - GFP_NOIO, pages, bio); + osdc = &dev->rbd_client->client->osdc; + req = ceph_osdc_alloc_request(osdc, flags, snapc, ops, + false, GFP_NOIO, pages, bio); if (!req) { - up_read(&header->snap_rwsem); + up_read(&dev->header_rwsem); ret = -ENOMEM; goto done_pages; } @@ -909,27 +937,27 @@ static int rbd_do_request(struct request *rq, layout->fl_object_size = cpu_to_le32(1 << RBD_MAX_OBJ_ORDER); layout->fl_pg_preferred = cpu_to_le32(-1); layout->fl_pg_pool = cpu_to_le32(dev->poolid); - ceph_calc_raw_layout(&dev->client->osdc, layout, snapid, - ofs, &len, &bno, req, ops); + ceph_calc_raw_layout(osdc, layout, snapid, ofs, &len, &bno, + req, ops); ceph_osdc_build_request(req, ofs, &len, ops, snapc, &mtime, req->r_oid, req->r_oid_len); - up_read(&header->snap_rwsem); + up_read(&dev->header_rwsem); if (linger_req) { - ceph_osdc_set_request_linger(&dev->client->osdc, req); + ceph_osdc_set_request_linger(osdc, req); *linger_req = req; } - ret = ceph_osdc_start_request(&dev->client->osdc, req, false); + ret = ceph_osdc_start_request(osdc, req, false); if (ret < 0) goto done_err; if (!rbd_cb) { - ret = ceph_osdc_wait_request(&dev->client->osdc, req); + ret = ceph_osdc_wait_request(osdc, req); if (ver) *ver = le64_to_cpu(req->r_reassert_version.version); dout("reassert_ver=%lld\n", @@ -1213,8 +1241,8 @@ static void rbd_watch_cb(u64 ver, u64 notify_id, u8 opcode, void *data) rc = __rbd_update_snaps(dev); mutex_unlock(&ctl_mutex); if (rc) - pr_warning(DRV_NAME "%d got notification but failed to update" - " snaps: %d\n", dev->major, rc); + pr_warning(RBD_DRV_NAME "%d got notification but failed to " + " update snaps: %d\n", dev->major, rc); rbd_req_sync_notify_ack(dev, ver, notify_id, dev->obj_md_name); } @@ -1227,7 +1255,7 @@ static int rbd_req_sync_watch(struct rbd_device *dev, u64 ver) { struct ceph_osd_req_op *ops; - struct ceph_osd_client *osdc = &dev->client->osdc; + struct ceph_osd_client *osdc = &dev->rbd_client->client->osdc; int ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_WATCH, 0); if (ret < 0) @@ -1314,7 +1342,7 @@ static int rbd_req_sync_notify(struct rbd_device *dev, const char *obj) { struct ceph_osd_req_op *ops; - struct ceph_osd_client *osdc = &dev->client->osdc; + struct ceph_osd_client *osdc = &dev->rbd_client->client->osdc; struct ceph_osd_event *event; struct rbd_notify_info info; int payload_len = sizeof(u32) + sizeof(u32); @@ -1421,9 +1449,7 @@ static void rbd_rq_fn(struct request_queue *q) struct request *rq; struct bio_pair *bp = NULL; - rq = blk_fetch_request(q); - - while (1) { + while ((rq = blk_fetch_request(q))) { struct bio *bio; struct bio *rq_bio, *next_bio = NULL; bool do_write; @@ -1441,32 +1467,32 @@ static void rbd_rq_fn(struct request_queue *q) /* filter out block requests we don't understand */ if ((rq->cmd_type != REQ_TYPE_FS)) { __blk_end_request_all(rq, 0); - goto next; + continue; } /* deduce our operation (read, write) */ do_write = (rq_data_dir(rq) == WRITE); size = blk_rq_bytes(rq); - ofs = blk_rq_pos(rq) * 512ULL; + ofs = blk_rq_pos(rq) * SECTOR_SIZE; rq_bio = rq->bio; if (do_write && rbd_dev->read_only) { __blk_end_request_all(rq, -EROFS); - goto next; + continue; } spin_unlock_irq(q->queue_lock); dout("%s 0x%x bytes at 0x%llx\n", do_write ? "write" : "read", - size, blk_rq_pos(rq) * 512ULL); + size, blk_rq_pos(rq) * SECTOR_SIZE); num_segs = rbd_get_num_segments(&rbd_dev->header, ofs, size); coll = rbd_alloc_coll(num_segs); if (!coll) { spin_lock_irq(q->queue_lock); __blk_end_request_all(rq, -ENOMEM); - goto next; + continue; } do { @@ -1512,8 +1538,6 @@ next_seg: if (bp) bio_pair_release(bp); spin_lock_irq(q->queue_lock); -next: - rq = blk_fetch_request(q); } } @@ -1526,13 +1550,17 @@ static int rbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bmd, struct bio_vec *bvec) { struct rbd_device *rbd_dev = q->queuedata; - unsigned int chunk_sectors = 1 << (rbd_dev->header.obj_order - 9); - sector_t sector = bmd->bi_sector + get_start_sect(bmd->bi_bdev); - unsigned int bio_sectors = bmd->bi_size >> 9; + unsigned int chunk_sectors; + sector_t sector; + unsigned int bio_sectors; int max; + chunk_sectors = 1 << (rbd_dev->header.obj_order - SECTOR_SHIFT); + sector = bmd->bi_sector + get_start_sect(bmd->bi_bdev); + bio_sectors = bmd->bi_size >> SECTOR_SHIFT; + max = (chunk_sectors - ((sector & (chunk_sectors - 1)) - + bio_sectors)) << 9; + + bio_sectors)) << SECTOR_SHIFT; if (max < 0) max = 0; /* bio_add cannot handle a negative return */ if (max <= bvec->bv_len && bio_sectors == 0) @@ -1565,15 +1593,16 @@ static int rbd_read_header(struct rbd_device *rbd_dev, ssize_t rc; struct rbd_image_header_ondisk *dh; int snap_count = 0; - u64 snap_names_len = 0; u64 ver; + size_t len; + /* + * First reads the fixed-size header to determine the number + * of snapshots, then re-reads it, along with all snapshot + * records as well as their stored names. + */ + len = sizeof (*dh); while (1) { - int len = sizeof(*dh) + - snap_count * sizeof(struct rbd_image_snap_ondisk) + - snap_names_len; - - rc = -ENOMEM; dh = kmalloc(len, GFP_KERNEL); if (!dh) return -ENOMEM; @@ -1588,21 +1617,22 @@ static int rbd_read_header(struct rbd_device *rbd_dev, rc = rbd_header_from_disk(header, dh, snap_count, GFP_KERNEL); if (rc < 0) { - if (rc == -ENXIO) { + if (rc == -ENXIO) pr_warning("unrecognized header format" " for image %s", rbd_dev->obj); - } goto out_dh; } - if (snap_count != header->total_snaps) { - snap_count = header->total_snaps; - snap_names_len = header->snap_names_len; - rbd_header_free(header); - kfree(dh); - continue; - } - break; + if (snap_count == header->total_snaps) + break; + + snap_count = header->total_snaps; + len = sizeof (*dh) + + snap_count * sizeof(struct rbd_image_snap_ondisk) + + header->snap_names_len; + + rbd_header_free(header); + kfree(dh); } header->obj_version = ver; @@ -1623,13 +1653,14 @@ static int rbd_header_add_snap(struct rbd_device *dev, int ret; void *data, *p, *e; u64 ver; + struct ceph_mon_client *monc; /* we should create a snapshot only if we're pointing at the head */ if (dev->cur_snap) return -EINVAL; - ret = ceph_monc_create_snapid(&dev->client->monc, dev->poolid, - &new_snapid); + monc = &dev->rbd_client->client->monc; + ret = ceph_monc_create_snapid(monc, dev->poolid, &new_snapid); dout("created snapid=%lld\n", new_snapid); if (ret < 0) return ret; @@ -1684,9 +1715,9 @@ static int __rbd_update_snaps(struct rbd_device *rbd_dev) return ret; /* resized? */ - set_capacity(rbd_dev->disk, h.image_size / 512ULL); + set_capacity(rbd_dev->disk, h.image_size / SECTOR_SIZE); - down_write(&rbd_dev->header.snap_rwsem); + down_write(&rbd_dev->header_rwsem); snap_seq = rbd_dev->header.snapc->seq; if (rbd_dev->header.total_snaps && @@ -1711,7 +1742,7 @@ static int __rbd_update_snaps(struct rbd_device *rbd_dev) ret = __rbd_init_snaps_header(rbd_dev); - up_write(&rbd_dev->header.snap_rwsem); + up_write(&rbd_dev->header_rwsem); return ret; } @@ -1721,6 +1752,7 @@ static int rbd_init_disk(struct rbd_device *rbd_dev) struct gendisk *disk; struct request_queue *q; int rc; + u64 segment_size; u64 total_size = 0; /* contact OSD, request size info about the object being mapped */ @@ -1733,7 +1765,7 @@ static int rbd_init_disk(struct rbd_device *rbd_dev) if (rc) return rc; - rc = rbd_header_set_snap(rbd_dev, rbd_dev->snap_name, &total_size); + rc = rbd_header_set_snap(rbd_dev, &total_size); if (rc) return rc; @@ -1743,7 +1775,7 @@ static int rbd_init_disk(struct rbd_device *rbd_dev) if (!disk) goto out; - snprintf(disk->disk_name, sizeof(disk->disk_name), DRV_NAME "%d", + snprintf(disk->disk_name, sizeof(disk->disk_name), RBD_DRV_NAME "%d", rbd_dev->id); disk->major = rbd_dev->major; disk->first_minor = 0; @@ -1756,11 +1788,15 @@ static int rbd_init_disk(struct rbd_device *rbd_dev) if (!q) goto out_disk; + /* We use the default size, but let's be explicit about it. */ + blk_queue_physical_block_size(q, SECTOR_SIZE); + /* set io sizes to object size */ - blk_queue_max_hw_sectors(q, rbd_obj_bytes(&rbd_dev->header) / 512ULL); - blk_queue_max_segment_size(q, rbd_obj_bytes(&rbd_dev->header)); - blk_queue_io_min(q, rbd_obj_bytes(&rbd_dev->header)); - blk_queue_io_opt(q, rbd_obj_bytes(&rbd_dev->header)); + segment_size = rbd_obj_bytes(&rbd_dev->header); + blk_queue_max_hw_sectors(q, segment_size / SECTOR_SIZE); + blk_queue_max_segment_size(q, segment_size); + blk_queue_io_min(q, segment_size); + blk_queue_io_opt(q, segment_size); blk_queue_merge_bvec(q, rbd_merge_bvec); disk->queue = q; @@ -1771,7 +1807,7 @@ static int rbd_init_disk(struct rbd_device *rbd_dev) rbd_dev->q = q; /* finally, announce the disk to the world */ - set_capacity(disk, total_size / 512ULL); + set_capacity(disk, total_size / SECTOR_SIZE); add_disk(disk); pr_info("%s: added with size 0x%llx\n", @@ -1788,10 +1824,15 @@ out: sysfs */ +static struct rbd_device *dev_to_rbd_dev(struct device *dev) +{ + return container_of(dev, struct rbd_device, dev); +} + static ssize_t rbd_size_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct rbd_device *rbd_dev = dev_to_rbd(dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); return sprintf(buf, "%llu\n", (unsigned long long)rbd_dev->header.image_size); } @@ -1799,7 +1840,7 @@ static ssize_t rbd_size_show(struct device *dev, static ssize_t rbd_major_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct rbd_device *rbd_dev = dev_to_rbd(dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); return sprintf(buf, "%d\n", rbd_dev->major); } @@ -1807,15 +1848,16 @@ static ssize_t rbd_major_show(struct device *dev, static ssize_t rbd_client_id_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct rbd_device *rbd_dev = dev_to_rbd(dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); - return sprintf(buf, "client%lld\n", ceph_client_id(rbd_dev->client)); + return sprintf(buf, "client%lld\n", + ceph_client_id(rbd_dev->rbd_client->client)); } static ssize_t rbd_pool_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct rbd_device *rbd_dev = dev_to_rbd(dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); return sprintf(buf, "%s\n", rbd_dev->pool_name); } @@ -1823,7 +1865,7 @@ static ssize_t rbd_pool_show(struct device *dev, static ssize_t rbd_name_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct rbd_device *rbd_dev = dev_to_rbd(dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); return sprintf(buf, "%s\n", rbd_dev->obj); } @@ -1832,7 +1874,7 @@ static ssize_t rbd_snap_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct rbd_device *rbd_dev = dev_to_rbd(dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); return sprintf(buf, "%s\n", rbd_dev->snap_name); } @@ -1842,7 +1884,7 @@ static ssize_t rbd_image_refresh(struct device *dev, const char *buf, size_t size) { - struct rbd_device *rbd_dev = dev_to_rbd(dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); int rc; int ret = size; @@ -1907,7 +1949,7 @@ static ssize_t rbd_snap_size_show(struct device *dev, { struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev); - return sprintf(buf, "%lld\n", (long long)snap->size); + return sprintf(buf, "%zd\n", snap->size); } static ssize_t rbd_snap_id_show(struct device *dev, @@ -1916,7 +1958,7 @@ static ssize_t rbd_snap_id_show(struct device *dev, { struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev); - return sprintf(buf, "%lld\n", (long long)snap->id); + return sprintf(buf, "%llu\n", (unsigned long long) snap->id); } static DEVICE_ATTR(snap_size, S_IRUGO, rbd_snap_size_show, NULL); @@ -2088,19 +2130,9 @@ static int __rbd_init_snaps_header(struct rbd_device *rbd_dev) return 0; } - -static void rbd_root_dev_release(struct device *dev) -{ -} - -static struct device rbd_root_dev = { - .init_name = "rbd", - .release = rbd_root_dev_release, -}; - static int rbd_bus_add_dev(struct rbd_device *rbd_dev) { - int ret = -ENOMEM; + int ret; struct device *dev; struct rbd_snap *snap; @@ -2114,7 +2146,7 @@ static int rbd_bus_add_dev(struct rbd_device *rbd_dev) dev_set_name(dev, "%d", rbd_dev->id); ret = device_register(dev); if (ret < 0) - goto done_free; + goto out; list_for_each_entry(snap, &rbd_dev->snaps, node) { ret = rbd_register_snap_dev(rbd_dev, snap, @@ -2122,10 +2154,7 @@ static int rbd_bus_add_dev(struct rbd_device *rbd_dev) if (ret < 0) break; } - - mutex_unlock(&ctl_mutex); - return 0; -done_free: +out: mutex_unlock(&ctl_mutex); return ret; } @@ -2154,104 +2183,250 @@ static int rbd_init_watch_dev(struct rbd_device *rbd_dev) return ret; } +static atomic64_t rbd_id_max = ATOMIC64_INIT(0); + +/* + * Get a unique rbd identifier for the given new rbd_dev, and add + * the rbd_dev to the global list. The minimum rbd id is 1. + */ +static void rbd_id_get(struct rbd_device *rbd_dev) +{ + rbd_dev->id = atomic64_inc_return(&rbd_id_max); + + spin_lock(&rbd_dev_list_lock); + list_add_tail(&rbd_dev->node, &rbd_dev_list); + spin_unlock(&rbd_dev_list_lock); +} + +/* + * Remove an rbd_dev from the global list, and record that its + * identifier is no longer in use. + */ +static void rbd_id_put(struct rbd_device *rbd_dev) +{ + struct list_head *tmp; + int rbd_id = rbd_dev->id; + int max_id; + + BUG_ON(rbd_id < 1); + + spin_lock(&rbd_dev_list_lock); + list_del_init(&rbd_dev->node); + + /* + * If the id being "put" is not the current maximum, there + * is nothing special we need to do. + */ + if (rbd_id != atomic64_read(&rbd_id_max)) { + spin_unlock(&rbd_dev_list_lock); + return; + } + + /* + * We need to update the current maximum id. Search the + * list to find out what it is. We're more likely to find + * the maximum at the end, so search the list backward. + */ + max_id = 0; + list_for_each_prev(tmp, &rbd_dev_list) { + struct rbd_device *rbd_dev; + + rbd_dev = list_entry(tmp, struct rbd_device, node); + if (rbd_id > max_id) + max_id = rbd_id; + } + spin_unlock(&rbd_dev_list_lock); + + /* + * The max id could have been updated by rbd_id_get(), in + * which case it now accurately reflects the new maximum. + * Be careful not to overwrite the maximum value in that + * case. + */ + atomic64_cmpxchg(&rbd_id_max, rbd_id, max_id); +} + +/* + * Skips over white space at *buf, and updates *buf to point to the + * first found non-space character (if any). Returns the length of + * the token (string of non-white space characters) found. Note + * that *buf must be terminated with '\0'. + */ +static inline size_t next_token(const char **buf) +{ + /* + * These are the characters that produce nonzero for + * isspace() in the "C" and "POSIX" locales. + */ + const char *spaces = " \f\n\r\t\v"; + + *buf += strspn(*buf, spaces); /* Find start of token */ + + return strcspn(*buf, spaces); /* Return token length */ +} + +/* + * Finds the next token in *buf, and if the provided token buffer is + * big enough, copies the found token into it. The result, if + * copied, is guaranteed to be terminated with '\0'. Note that *buf + * must be terminated with '\0' on entry. + * + * Returns the length of the token found (not including the '\0'). + * Return value will be 0 if no token is found, and it will be >= + * token_size if the token would not fit. + * + * The *buf pointer will be updated to point beyond the end of the + * found token. Note that this occurs even if the token buffer is + * too small to hold it. + */ +static inline size_t copy_token(const char **buf, + char *token, + size_t token_size) +{ + size_t len; + + len = next_token(buf); + if (len < token_size) { + memcpy(token, *buf, len); + *(token + len) = '\0'; + } + *buf += len; + + return len; +} + +/* + * This fills in the pool_name, obj, obj_len, snap_name, obj_len, + * rbd_dev, rbd_md_name, and name fields of the given rbd_dev, based + * on the list of monitor addresses and other options provided via + * /sys/bus/rbd/add. + */ +static int rbd_add_parse_args(struct rbd_device *rbd_dev, + const char *buf, + const char **mon_addrs, + size_t *mon_addrs_size, + char *options, + size_t options_size) +{ + size_t len; + + /* The first four tokens are required */ + + len = next_token(&buf); + if (!len) + return -EINVAL; + *mon_addrs_size = len + 1; + *mon_addrs = buf; + + buf += len; + + len = copy_token(&buf, options, options_size); + if (!len || len >= options_size) + return -EINVAL; + + len = copy_token(&buf, rbd_dev->pool_name, sizeof (rbd_dev->pool_name)); + if (!len || len >= sizeof (rbd_dev->pool_name)) + return -EINVAL; + + len = copy_token(&buf, rbd_dev->obj, sizeof (rbd_dev->obj)); + if (!len || len >= sizeof (rbd_dev->obj)) + return -EINVAL; + + /* We have the object length in hand, save it. */ + + rbd_dev->obj_len = len; + + BUILD_BUG_ON(RBD_MAX_MD_NAME_LEN + < RBD_MAX_OBJ_NAME_LEN + sizeof (RBD_SUFFIX)); + sprintf(rbd_dev->obj_md_name, "%s%s", rbd_dev->obj, RBD_SUFFIX); + + /* + * The snapshot name is optional, but it's an error if it's + * too long. If no snapshot is supplied, fill in the default. + */ + len = copy_token(&buf, rbd_dev->snap_name, sizeof (rbd_dev->snap_name)); + if (!len) + memcpy(rbd_dev->snap_name, RBD_SNAP_HEAD_NAME, + sizeof (RBD_SNAP_HEAD_NAME)); + else if (len >= sizeof (rbd_dev->snap_name)) + return -EINVAL; + + return 0; +} + static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count) { - struct ceph_osd_client *osdc; struct rbd_device *rbd_dev; - ssize_t rc = -ENOMEM; - int irc, new_id = 0; - struct list_head *tmp; - char *mon_dev_name; - char *options; + const char *mon_addrs = NULL; + size_t mon_addrs_size = 0; + char *options = NULL; + struct ceph_osd_client *osdc; + int rc = -ENOMEM; if (!try_module_get(THIS_MODULE)) return -ENODEV; - mon_dev_name = kmalloc(RBD_MAX_OPT_LEN, GFP_KERNEL); - if (!mon_dev_name) - goto err_out_mod; - - options = kmalloc(RBD_MAX_OPT_LEN, GFP_KERNEL); - if (!options) - goto err_mon_dev; - - /* new rbd_device object */ rbd_dev = kzalloc(sizeof(*rbd_dev), GFP_KERNEL); if (!rbd_dev) - goto err_out_opt; + goto err_nomem; + options = kmalloc(count, GFP_KERNEL); + if (!options) + goto err_nomem; /* static rbd_device initialization */ spin_lock_init(&rbd_dev->lock); INIT_LIST_HEAD(&rbd_dev->node); INIT_LIST_HEAD(&rbd_dev->snaps); + init_rwsem(&rbd_dev->header_rwsem); - init_rwsem(&rbd_dev->header.snap_rwsem); + init_rwsem(&rbd_dev->header_rwsem); /* generate unique id: find highest unique id, add one */ - mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); - - list_for_each(tmp, &rbd_dev_list) { - struct rbd_device *rbd_dev; + rbd_id_get(rbd_dev); - rbd_dev = list_entry(tmp, struct rbd_device, node); - if (rbd_dev->id >= new_id) - new_id = rbd_dev->id + 1; - } - - rbd_dev->id = new_id; - - /* add to global list */ - list_add_tail(&rbd_dev->node, &rbd_dev_list); + /* Fill in the device name, now that we have its id. */ + BUILD_BUG_ON(DEV_NAME_LEN + < sizeof (RBD_DRV_NAME) + MAX_INT_FORMAT_WIDTH); + sprintf(rbd_dev->name, "%s%d", RBD_DRV_NAME, rbd_dev->id); /* parse add command */ - if (sscanf(buf, "%" __stringify(RBD_MAX_OPT_LEN) "s " - "%" __stringify(RBD_MAX_OPT_LEN) "s " - "%" __stringify(RBD_MAX_POOL_NAME_LEN) "s " - "%" __stringify(RBD_MAX_OBJ_NAME_LEN) "s" - "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s", - mon_dev_name, options, rbd_dev->pool_name, - rbd_dev->obj, rbd_dev->snap_name) < 4) { - rc = -EINVAL; - goto err_out_slot; - } - - if (rbd_dev->snap_name[0] == 0) - rbd_dev->snap_name[0] = '-'; - - rbd_dev->obj_len = strlen(rbd_dev->obj); - snprintf(rbd_dev->obj_md_name, sizeof(rbd_dev->obj_md_name), "%s%s", - rbd_dev->obj, RBD_SUFFIX); - - /* initialize rest of new object */ - snprintf(rbd_dev->name, DEV_NAME_LEN, DRV_NAME "%d", rbd_dev->id); - rc = rbd_get_client(rbd_dev, mon_dev_name, options); - if (rc < 0) - goto err_out_slot; + rc = rbd_add_parse_args(rbd_dev, buf, &mon_addrs, &mon_addrs_size, + options, count); + if (rc) + goto err_put_id; - mutex_unlock(&ctl_mutex); + rbd_dev->rbd_client = rbd_get_client(mon_addrs, mon_addrs_size - 1, + options); + if (IS_ERR(rbd_dev->rbd_client)) { + rc = PTR_ERR(rbd_dev->rbd_client); + goto err_put_id; + } /* pick the pool */ - osdc = &rbd_dev->client->osdc; + osdc = &rbd_dev->rbd_client->client->osdc; rc = ceph_pg_poolid_by_name(osdc->osdmap, rbd_dev->pool_name); if (rc < 0) goto err_out_client; rbd_dev->poolid = rc; /* register our block device */ - irc = register_blkdev(0, rbd_dev->name); - if (irc < 0) { - rc = irc; + rc = register_blkdev(0, rbd_dev->name); + if (rc < 0) goto err_out_client; - } - rbd_dev->major = irc; + rbd_dev->major = rc; rc = rbd_bus_add_dev(rbd_dev); if (rc) goto err_out_blkdev; - /* set up and announce blkdev mapping */ + /* + * At this point cleanup in the event of an error is the job + * of the sysfs code (initiated by rbd_bus_del_dev()). + * + * Set up and announce blkdev mapping. + */ rc = rbd_init_disk(rbd_dev); if (rc) goto err_out_bus; @@ -2263,35 +2438,26 @@ static ssize_t rbd_add(struct bus_type *bus, return count; err_out_bus: - mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); - list_del_init(&rbd_dev->node); - mutex_unlock(&ctl_mutex); - /* this will also clean up rest of rbd_dev stuff */ rbd_bus_del_dev(rbd_dev); kfree(options); - kfree(mon_dev_name); return rc; err_out_blkdev: unregister_blkdev(rbd_dev->major, rbd_dev->name); err_out_client: rbd_put_client(rbd_dev); - mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); -err_out_slot: - list_del_init(&rbd_dev->node); - mutex_unlock(&ctl_mutex); - - kfree(rbd_dev); -err_out_opt: +err_put_id: + rbd_id_put(rbd_dev); +err_nomem: kfree(options); -err_mon_dev: - kfree(mon_dev_name); -err_out_mod: + kfree(rbd_dev); + dout("Error adding device %s\n", buf); module_put(THIS_MODULE); - return rc; + + return (ssize_t) rc; } static struct rbd_device *__rbd_get_dev(unsigned long id) @@ -2299,22 +2465,28 @@ static struct rbd_device *__rbd_get_dev(unsigned long id) struct list_head *tmp; struct rbd_device *rbd_dev; + spin_lock(&rbd_dev_list_lock); list_for_each(tmp, &rbd_dev_list) { rbd_dev = list_entry(tmp, struct rbd_device, node); - if (rbd_dev->id == id) + if (rbd_dev->id == id) { + spin_unlock(&rbd_dev_list_lock); return rbd_dev; + } } + spin_unlock(&rbd_dev_list_lock); return NULL; } static void rbd_dev_release(struct device *dev) { - struct rbd_device *rbd_dev = - container_of(dev, struct rbd_device, dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); - if (rbd_dev->watch_request) - ceph_osdc_unregister_linger_request(&rbd_dev->client->osdc, + if (rbd_dev->watch_request) { + struct ceph_client *client = rbd_dev->rbd_client->client; + + ceph_osdc_unregister_linger_request(&client->osdc, rbd_dev->watch_request); + } if (rbd_dev->watch_event) rbd_req_sync_unwatch(rbd_dev, rbd_dev->obj_md_name); @@ -2323,6 +2495,9 @@ static void rbd_dev_release(struct device *dev) /* clean up and free blkdev */ rbd_free_disk(rbd_dev); unregister_blkdev(rbd_dev->major, rbd_dev->name); + + /* done with the id, and with the rbd_dev */ + rbd_id_put(rbd_dev); kfree(rbd_dev); /* release module ref */ @@ -2355,8 +2530,6 @@ static ssize_t rbd_remove(struct bus_type *bus, goto done; } - list_del_init(&rbd_dev->node); - __rbd_remove_all_snaps(rbd_dev); rbd_bus_del_dev(rbd_dev); @@ -2370,7 +2543,7 @@ static ssize_t rbd_snap_add(struct device *dev, const char *buf, size_t count) { - struct rbd_device *rbd_dev = dev_to_rbd(dev); + struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); int ret; char *name = kmalloc(count + 1, GFP_KERNEL); if (!name) @@ -2406,12 +2579,6 @@ err_unlock: return ret; } -static struct bus_attribute rbd_bus_attrs[] = { - __ATTR(add, S_IWUSR, NULL, rbd_add), - __ATTR(remove, S_IWUSR, NULL, rbd_remove), - __ATTR_NULL -}; - /* * create control files in sysfs * /sys/bus/rbd/... @@ -2420,21 +2587,21 @@ static int rbd_sysfs_init(void) { int ret; - rbd_bus_type.bus_attrs = rbd_bus_attrs; - - ret = bus_register(&rbd_bus_type); - if (ret < 0) + ret = device_register(&rbd_root_dev); + if (ret < 0) return ret; - ret = device_register(&rbd_root_dev); + ret = bus_register(&rbd_bus_type); + if (ret < 0) + device_unregister(&rbd_root_dev); return ret; } static void rbd_sysfs_cleanup(void) { - device_unregister(&rbd_root_dev); bus_unregister(&rbd_bus_type); + device_unregister(&rbd_root_dev); } int __init rbd_init(void) @@ -2444,8 +2611,7 @@ int __init rbd_init(void) rc = rbd_sysfs_init(); if (rc) return rc; - spin_lock_init(&node_lock); - pr_info("loaded " DRV_NAME_LONG "\n"); + pr_info("loaded " RBD_DRV_NAME_LONG "\n"); return 0; } diff --git a/drivers/block/rbd_types.h b/drivers/block/rbd_types.h index fc6c678..9507086 100644 --- a/drivers/block/rbd_types.h +++ b/drivers/block/rbd_types.h @@ -41,10 +41,6 @@ #define RBD_HEADER_SIGNATURE "RBD" #define RBD_HEADER_VERSION "001.005" -struct rbd_info { - __le64 max_id; -} __attribute__ ((packed)); - struct rbd_image_snap_ondisk { __le64 id; __le64 image_size; diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c index 48e8fee..9dcf76a 100644 --- a/drivers/block/sunvdc.c +++ b/drivers/block/sunvdc.c @@ -839,10 +839,7 @@ static struct vio_driver vdc_port_driver = { .id_table = vdc_port_match, .probe = vdc_port_probe, .remove = vdc_port_remove, - .driver = { - .name = "vdc_port", - .owner = THIS_MODULE, - } + .name = "vdc_port", }; static int __init vdc_init(void) diff --git a/drivers/block/xd.c b/drivers/block/xd.c index 51a9727..ff54052 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -52,7 +52,6 @@ #include <linux/io.h> #include <linux/gfp.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <asm/dma.h> diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 9c09d6f..308c859 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -39,7 +39,6 @@ #include <linux/serial.h> #include <linux/serial_reg.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <linux/device.h> diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 194224d..c4fc2f3 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -38,7 +38,6 @@ #include <linux/serial.h> #include <linux/serial_reg.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <pcmcia/cistpl.h> diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 049c059..6e8d961 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -38,7 +38,6 @@ #include <linux/serial.h> #include <linux/serial_reg.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <pcmcia/cistpl.h> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index f4837a8..57501ca 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -31,7 +31,6 @@ #include <linux/kthread.h> #include <linux/delay.h> -#include <asm/system.h> /* * The apm_bios device is one of the misc char devices. diff --git a/drivers/char/ds1302.c b/drivers/char/ds1302.c index ed8303f9..7d34b20 100644 --- a/drivers/char/ds1302.c +++ b/drivers/char/ds1302.c @@ -24,7 +24,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/rtc.h> #if defined(CONFIG_M32R) #include <asm/m32r.h> diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c index 53c524e..a082d00 100644 --- a/drivers/char/efirtc.c +++ b/drivers/char/efirtc.c @@ -37,7 +37,6 @@ #include <linux/efi.h> #include <linux/uaccess.h> -#include <asm/system.h> #define EFI_RTC_VERSION "0.4" diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c index f773a9d..21cb980 100644 --- a/drivers/char/genrtc.c +++ b/drivers/char/genrtc.c @@ -56,7 +56,6 @@ #include <linux/workqueue.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/rtc.h> /* diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 0833896..3845ab4 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -36,7 +36,6 @@ #include <linux/io.h> #include <asm/current.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/div64.h> diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 2aa3977..9eb360f 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -34,7 +34,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/errno.h> -#include <asm/system.h> #include <linux/poll.h> #include <linux/sched.h> #include <linux/spinlock.h> diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c index cf82fed..e53fc24 100644 --- a/drivers/char/ipmi/ipmi_kcs_sm.c +++ b/drivers/char/ipmi/ipmi_kcs_sm.c @@ -118,8 +118,8 @@ enum kcs_states { #define MAX_KCS_WRITE_SIZE IPMI_MAX_MSG_LENGTH /* Timeouts in microseconds. */ -#define IBF_RETRY_TIMEOUT 1000000 -#define OBF_RETRY_TIMEOUT 1000000 +#define IBF_RETRY_TIMEOUT 5000000 +#define OBF_RETRY_TIMEOUT 5000000 #define MAX_ERROR_RETRIES 10 #define ERROR0_OBF_WAIT_JIFFIES (2*HZ) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 58c0e63..2c29942 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -33,7 +33,6 @@ #include <linux/module.h> #include <linux/errno.h> -#include <asm/system.h> #include <linux/poll.h> #include <linux/sched.h> #include <linux/seq_file.h> @@ -46,6 +45,7 @@ #include <linux/init.h> #include <linux/proc_fs.h> #include <linux/rcupdate.h> +#include <linux/interrupt.h> #define PFX "IPMI message handler: " @@ -53,6 +53,8 @@ static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); static int ipmi_init_msghandler(void); +static void smi_recv_tasklet(unsigned long); +static void handle_new_recv_msgs(ipmi_smi_t intf); static int initialized; @@ -355,12 +357,15 @@ struct ipmi_smi { int curr_seq; /* - * Messages that were delayed for some reason (out of memory, - * for instance), will go in here to be processed later in a - * periodic timer interrupt. + * Messages queued for delivery. If delivery fails (out of memory + * for instance), They will stay in here to be processed later in a + * periodic timer interrupt. The tasklet is for handling received + * messages directly from the handler. */ spinlock_t waiting_msgs_lock; struct list_head waiting_msgs; + atomic_t watchdog_pretimeouts_to_deliver; + struct tasklet_struct recv_tasklet; /* * The list of command receivers that are registered for commands @@ -493,6 +498,8 @@ static void clean_up_interface_data(ipmi_smi_t intf) struct cmd_rcvr *rcvr, *rcvr2; struct list_head list; + tasklet_kill(&intf->recv_tasklet); + free_smi_msg_list(&intf->waiting_msgs); free_recv_msg_list(&intf->waiting_events); @@ -2786,12 +2793,17 @@ channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) return; } -void ipmi_poll_interface(ipmi_user_t user) +static void ipmi_poll(ipmi_smi_t intf) { - ipmi_smi_t intf = user->intf; - if (intf->handlers->poll) intf->handlers->poll(intf->send_info); + /* In case something came in */ + handle_new_recv_msgs(intf); +} + +void ipmi_poll_interface(ipmi_user_t user) +{ + ipmi_poll(user->intf); } EXPORT_SYMBOL(ipmi_poll_interface); @@ -2860,6 +2872,10 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, #endif spin_lock_init(&intf->waiting_msgs_lock); INIT_LIST_HEAD(&intf->waiting_msgs); + tasklet_init(&intf->recv_tasklet, + smi_recv_tasklet, + (unsigned long) intf); + atomic_set(&intf->watchdog_pretimeouts_to_deliver, 0); spin_lock_init(&intf->events_lock); INIT_LIST_HEAD(&intf->waiting_events); intf->waiting_events_count = 0; @@ -3622,11 +3638,11 @@ static int handle_bmc_rsp(ipmi_smi_t intf, } /* - * Handle a new message. Return 1 if the message should be requeued, + * Handle a received message. Return 1 if the message should be requeued, * 0 if the message should be freed, or -1 if the message should not * be freed or requeued. */ -static int handle_new_recv_msg(ipmi_smi_t intf, +static int handle_one_recv_msg(ipmi_smi_t intf, struct ipmi_smi_msg *msg) { int requeue; @@ -3784,12 +3800,72 @@ static int handle_new_recv_msg(ipmi_smi_t intf, return requeue; } +/* + * If there are messages in the queue or pretimeouts, handle them. + */ +static void handle_new_recv_msgs(ipmi_smi_t intf) +{ + struct ipmi_smi_msg *smi_msg; + unsigned long flags = 0; + int rv; + int run_to_completion = intf->run_to_completion; + + /* See if any waiting messages need to be processed. */ + if (!run_to_completion) + spin_lock_irqsave(&intf->waiting_msgs_lock, flags); + while (!list_empty(&intf->waiting_msgs)) { + smi_msg = list_entry(intf->waiting_msgs.next, + struct ipmi_smi_msg, link); + list_del(&smi_msg->link); + if (!run_to_completion) + spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); + rv = handle_one_recv_msg(intf, smi_msg); + if (!run_to_completion) + spin_lock_irqsave(&intf->waiting_msgs_lock, flags); + if (rv == 0) { + /* Message handled */ + ipmi_free_smi_msg(smi_msg); + } else if (rv < 0) { + /* Fatal error on the message, del but don't free. */ + } else { + /* + * To preserve message order, quit if we + * can't handle a message. + */ + list_add(&smi_msg->link, &intf->waiting_msgs); + break; + } + } + if (!run_to_completion) + spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); + + /* + * If the pretimout count is non-zero, decrement one from it and + * deliver pretimeouts to all the users. + */ + if (atomic_add_unless(&intf->watchdog_pretimeouts_to_deliver, -1, 0)) { + ipmi_user_t user; + + rcu_read_lock(); + list_for_each_entry_rcu(user, &intf->users, link) { + if (user->handler->ipmi_watchdog_pretimeout) + user->handler->ipmi_watchdog_pretimeout( + user->handler_data); + } + rcu_read_unlock(); + } +} + +static void smi_recv_tasklet(unsigned long val) +{ + handle_new_recv_msgs((ipmi_smi_t) val); +} + /* Handle a new message from the lower layer. */ void ipmi_smi_msg_received(ipmi_smi_t intf, struct ipmi_smi_msg *msg) { unsigned long flags = 0; /* keep us warning-free. */ - int rv; int run_to_completion; @@ -3843,31 +3919,11 @@ void ipmi_smi_msg_received(ipmi_smi_t intf, run_to_completion = intf->run_to_completion; if (!run_to_completion) spin_lock_irqsave(&intf->waiting_msgs_lock, flags); - if (!list_empty(&intf->waiting_msgs)) { - list_add_tail(&msg->link, &intf->waiting_msgs); - if (!run_to_completion) - spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); - goto out; - } + list_add_tail(&msg->link, &intf->waiting_msgs); if (!run_to_completion) spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); - rv = handle_new_recv_msg(intf, msg); - if (rv > 0) { - /* - * Could not handle the message now, just add it to a - * list to handle later. - */ - run_to_completion = intf->run_to_completion; - if (!run_to_completion) - spin_lock_irqsave(&intf->waiting_msgs_lock, flags); - list_add_tail(&msg->link, &intf->waiting_msgs); - if (!run_to_completion) - spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); - } else if (rv == 0) { - ipmi_free_smi_msg(msg); - } - + tasklet_schedule(&intf->recv_tasklet); out: return; } @@ -3875,16 +3931,8 @@ EXPORT_SYMBOL(ipmi_smi_msg_received); void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf) { - ipmi_user_t user; - - rcu_read_lock(); - list_for_each_entry_rcu(user, &intf->users, link) { - if (!user->handler->ipmi_watchdog_pretimeout) - continue; - - user->handler->ipmi_watchdog_pretimeout(user->handler_data); - } - rcu_read_unlock(); + atomic_set(&intf->watchdog_pretimeouts_to_deliver, 1); + tasklet_schedule(&intf->recv_tasklet); } EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout); @@ -3998,28 +4046,12 @@ static void ipmi_timeout_handler(long timeout_period) ipmi_smi_t intf; struct list_head timeouts; struct ipmi_recv_msg *msg, *msg2; - struct ipmi_smi_msg *smi_msg, *smi_msg2; unsigned long flags; int i; rcu_read_lock(); list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { - /* See if any waiting messages need to be processed. */ - spin_lock_irqsave(&intf->waiting_msgs_lock, flags); - list_for_each_entry_safe(smi_msg, smi_msg2, - &intf->waiting_msgs, link) { - if (!handle_new_recv_msg(intf, smi_msg)) { - list_del(&smi_msg->link); - ipmi_free_smi_msg(smi_msg); - } else { - /* - * To preserve message order, quit if we - * can't handle a message. - */ - break; - } - } - spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); + tasklet_schedule(&intf->recv_tasklet); /* * Go through the seq table and find any messages that @@ -4173,12 +4205,48 @@ EXPORT_SYMBOL(ipmi_free_recv_msg); #ifdef CONFIG_IPMI_PANIC_EVENT +static atomic_t panic_done_count = ATOMIC_INIT(0); + static void dummy_smi_done_handler(struct ipmi_smi_msg *msg) { + atomic_dec(&panic_done_count); } static void dummy_recv_done_handler(struct ipmi_recv_msg *msg) { + atomic_dec(&panic_done_count); +} + +/* + * Inside a panic, send a message and wait for a response. + */ +static void ipmi_panic_request_and_wait(ipmi_smi_t intf, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *msg) +{ + struct ipmi_smi_msg smi_msg; + struct ipmi_recv_msg recv_msg; + int rv; + + smi_msg.done = dummy_smi_done_handler; + recv_msg.done = dummy_recv_done_handler; + atomic_add(2, &panic_done_count); + rv = i_ipmi_request(NULL, + intf, + addr, + 0, + msg, + intf, + &smi_msg, + &recv_msg, + 0, + intf->channels[0].address, + intf->channels[0].lun, + 0, 1); /* Don't retry, and don't wait. */ + if (rv) + atomic_sub(2, &panic_done_count); + while (atomic_read(&panic_done_count) != 0) + ipmi_poll(intf); } #ifdef CONFIG_IPMI_PANIC_STRING @@ -4217,8 +4285,6 @@ static void send_panic_events(char *str) unsigned char data[16]; struct ipmi_system_interface_addr *si; struct ipmi_addr addr; - struct ipmi_smi_msg smi_msg; - struct ipmi_recv_msg recv_msg; si = (struct ipmi_system_interface_addr *) &addr; si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; @@ -4246,9 +4312,6 @@ static void send_panic_events(char *str) data[7] = str[2]; } - smi_msg.done = dummy_smi_done_handler; - recv_msg.done = dummy_recv_done_handler; - /* For every registered interface, send the event. */ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { if (!intf->handlers) @@ -4258,18 +4321,7 @@ static void send_panic_events(char *str) intf->run_to_completion = 1; /* Send the event announcing the panic. */ intf->handlers->set_run_to_completion(intf->send_info, 1); - i_ipmi_request(NULL, - intf, - &addr, - 0, - &msg, - intf, - &smi_msg, - &recv_msg, - 0, - intf->channels[0].address, - intf->channels[0].lun, - 0, 1); /* Don't retry, and don't wait. */ + ipmi_panic_request_and_wait(intf, &addr, &msg); } #ifdef CONFIG_IPMI_PANIC_STRING @@ -4317,18 +4369,7 @@ static void send_panic_events(char *str) msg.data = NULL; msg.data_len = 0; intf->null_user_handler = device_id_fetcher; - i_ipmi_request(NULL, - intf, - &addr, - 0, - &msg, - intf, - &smi_msg, - &recv_msg, - 0, - intf->channels[0].address, - intf->channels[0].lun, - 0, 1); /* Don't retry, and don't wait. */ + ipmi_panic_request_and_wait(intf, &addr, &msg); if (intf->local_event_generator) { /* Request the event receiver from the local MC. */ @@ -4337,18 +4378,7 @@ static void send_panic_events(char *str) msg.data = NULL; msg.data_len = 0; intf->null_user_handler = event_receiver_fetcher; - i_ipmi_request(NULL, - intf, - &addr, - 0, - &msg, - intf, - &smi_msg, - &recv_msg, - 0, - intf->channels[0].address, - intf->channels[0].lun, - 0, 1); /* no retry, and no wait. */ + ipmi_panic_request_and_wait(intf, &addr, &msg); } intf->null_user_handler = NULL; @@ -4405,18 +4435,7 @@ static void send_panic_events(char *str) strncpy(data+5, p, 11); p += size; - i_ipmi_request(NULL, - intf, - &addr, - 0, - &msg, - intf, - &smi_msg, - &recv_msg, - 0, - intf->channels[0].address, - intf->channels[0].lun, - 0, 1); /* no retry, and no wait. */ + ipmi_panic_request_and_wait(intf, &addr, &msg); } } #endif /* CONFIG_IPMI_PANIC_STRING */ diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 50fcf9c..1e638ff 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -41,7 +41,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> -#include <asm/system.h> #include <linux/sched.h> #include <linux/seq_file.h> #include <linux/timer.h> @@ -171,7 +170,6 @@ struct smi_info { struct si_sm_handlers *handlers; enum si_type si_type; spinlock_t si_lock; - spinlock_t msg_lock; struct list_head xmit_msgs; struct list_head hp_xmit_msgs; struct ipmi_smi_msg *curr_msg; @@ -320,16 +318,8 @@ static int register_xaction_notifier(struct notifier_block *nb) static void deliver_recv_msg(struct smi_info *smi_info, struct ipmi_smi_msg *msg) { - /* Deliver the message to the upper layer with the lock - released. */ - - if (smi_info->run_to_completion) { - ipmi_smi_msg_received(smi_info->intf, msg); - } else { - spin_unlock(&(smi_info->si_lock)); - ipmi_smi_msg_received(smi_info->intf, msg); - spin_lock(&(smi_info->si_lock)); - } + /* Deliver the message to the upper layer. */ + ipmi_smi_msg_received(smi_info->intf, msg); } static void return_hosed_msg(struct smi_info *smi_info, int cCode) @@ -358,13 +348,6 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) struct timeval t; #endif - /* - * No need to save flags, we aleady have interrupts off and we - * already hold the SMI lock. - */ - if (!smi_info->run_to_completion) - spin_lock(&(smi_info->msg_lock)); - /* Pick the high priority queue first. */ if (!list_empty(&(smi_info->hp_xmit_msgs))) { entry = smi_info->hp_xmit_msgs.next; @@ -402,9 +385,6 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) rv = SI_SM_CALL_WITHOUT_DELAY; } out: - if (!smi_info->run_to_completion) - spin_unlock(&(smi_info->msg_lock)); - return rv; } @@ -481,9 +461,7 @@ static void handle_flags(struct smi_info *smi_info) start_clear_flags(smi_info); smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; - spin_unlock(&(smi_info->si_lock)); ipmi_smi_watchdog_pretimeout(smi_info->intf); - spin_lock(&(smi_info->si_lock)); } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) { /* Messages available. */ smi_info->curr_msg = ipmi_alloc_smi_msg(); @@ -889,19 +867,6 @@ static void sender(void *send_info, printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif - /* - * last_timeout_jiffies is updated here to avoid - * smi_timeout() handler passing very large time_diff - * value to smi_event_handler() that causes - * the send command to abort. - */ - smi_info->last_timeout_jiffies = jiffies; - - mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES); - - if (smi_info->thread) - wake_up_process(smi_info->thread); - if (smi_info->run_to_completion) { /* * If we are running to completion, then throw it in @@ -924,16 +889,29 @@ static void sender(void *send_info, return; } - spin_lock_irqsave(&smi_info->msg_lock, flags); + spin_lock_irqsave(&smi_info->si_lock, flags); if (priority > 0) list_add_tail(&msg->link, &smi_info->hp_xmit_msgs); else list_add_tail(&msg->link, &smi_info->xmit_msgs); - spin_unlock_irqrestore(&smi_info->msg_lock, flags); - spin_lock_irqsave(&smi_info->si_lock, flags); - if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) + if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) { + /* + * last_timeout_jiffies is updated here to avoid + * smi_timeout() handler passing very large time_diff + * value to smi_event_handler() that causes + * the send command to abort. + */ + smi_info->last_timeout_jiffies = jiffies; + + mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES); + + if (smi_info->thread) + wake_up_process(smi_info->thread); + start_next_msg(smi_info); + smi_event_handler(smi_info, 0); + } spin_unlock_irqrestore(&smi_info->si_lock, flags); } @@ -1034,16 +1012,19 @@ static int ipmi_thread(void *data) static void poll(void *send_info) { struct smi_info *smi_info = send_info; - unsigned long flags; + unsigned long flags = 0; + int run_to_completion = smi_info->run_to_completion; /* * Make sure there is some delay in the poll loop so we can * drive time forward and timeout things. */ udelay(10); - spin_lock_irqsave(&smi_info->si_lock, flags); + if (!run_to_completion) + spin_lock_irqsave(&smi_info->si_lock, flags); smi_event_handler(smi_info, 10); - spin_unlock_irqrestore(&smi_info->si_lock, flags); + if (!run_to_completion) + spin_unlock_irqrestore(&smi_info->si_lock, flags); } static void request_events(void *send_info) @@ -1680,10 +1661,8 @@ static struct smi_info *smi_info_alloc(void) { struct smi_info *info = kzalloc(sizeof(*info), GFP_KERNEL); - if (info) { + if (info) spin_lock_init(&info->si_lock); - spin_lock_init(&info->msg_lock); - } return info; } diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 34767a6..7ed356e 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -153,7 +153,7 @@ #endif static DEFINE_MUTEX(ipmi_watchdog_mutex); -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static ipmi_user_t watchdog_user; static int watchdog_ifnum; @@ -320,7 +320,7 @@ module_param(start_now, int, 0444); MODULE_PARM_DESC(start_now, "Set to 1 to start the watchdog as" "soon as the driver is loaded."); -module_param(nowayout, int, 0644); +module_param(nowayout, bool, 0644); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=CONFIG_WATCHDOG_NOWAYOUT)"); @@ -520,6 +520,7 @@ static void panic_halt_ipmi_heartbeat(void) msg.cmd = IPMI_WDOG_RESET_TIMER; msg.data = NULL; msg.data_len = 0; + atomic_add(2, &panic_done_count); rv = ipmi_request_supply_msgs(watchdog_user, (struct ipmi_addr *) &addr, 0, @@ -528,8 +529,8 @@ static void panic_halt_ipmi_heartbeat(void) &panic_halt_heartbeat_smi_msg, &panic_halt_heartbeat_recv_msg, 1); - if (!rv) - atomic_add(2, &panic_done_count); + if (rv) + atomic_sub(2, &panic_done_count); } static struct ipmi_smi_msg panic_halt_smi_msg = { @@ -553,16 +554,18 @@ static void panic_halt_ipmi_set_timeout(void) /* Wait for the messages to be free. */ while (atomic_read(&panic_done_count) != 0) ipmi_poll_interface(watchdog_user); + atomic_add(2, &panic_done_count); rv = i_ipmi_set_timeout(&panic_halt_smi_msg, &panic_halt_recv_msg, &send_heartbeat_now); - if (!rv) { - atomic_add(2, &panic_done_count); - if (send_heartbeat_now) - panic_halt_ipmi_heartbeat(); - } else + if (rv) { + atomic_sub(2, &panic_done_count); printk(KERN_WARNING PFX "Unable to extend the watchdog timeout."); + } else { + if (send_heartbeat_now) + panic_halt_ipmi_heartbeat(); + } while (atomic_read(&panic_done_count) != 0) ipmi_poll_interface(watchdog_user); } @@ -1164,7 +1167,7 @@ static int wdog_reboot_handler(struct notifier_block *this, if (code == SYS_POWER_OFF || code == SYS_HALT) { /* Disable the WDT if we are shutting down. */ ipmi_watchdog_state = WDOG_TIMEOUT_NONE; - panic_halt_ipmi_set_timeout(); + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { /* Set a long timer to let the reboot happens, but reboot if it hangs, but only if the watchdog @@ -1172,7 +1175,7 @@ static int wdog_reboot_handler(struct notifier_block *this, timeout = 120; pretimeout = 0; ipmi_watchdog_state = WDOG_TIMEOUT_RESET; - panic_halt_ipmi_set_timeout(); + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); } } return NOTIFY_OK; diff --git a/drivers/char/lp.c b/drivers/char/lp.c index f434856..a741e41 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -135,7 +135,6 @@ #include <asm/irq.h> #include <asm/uaccess.h> -#include <asm/system.h> /* if you have more than 8 printers, remember to increase LP_NO */ #define LP_NO 8 @@ -706,16 +705,13 @@ static long lp_compat_ioctl(struct file *file, unsigned int cmd, { unsigned int minor; struct timeval par_timeout; - struct compat_timeval __user *tc; int ret; minor = iminor(file->f_path.dentry->d_inode); mutex_lock(&lp_mutex); switch (cmd) { case LPSETTIMEOUT: - tc = compat_ptr(arg); - if (get_user(par_timeout.tv_sec, &tc->tv_sec) || - get_user(par_timeout.tv_usec, &tc->tv_usec)) { + if (compat_get_timeval(&par_timeout, compat_ptr(arg))) { ret = -EFAULT; break; } diff --git a/drivers/char/mbcs.c b/drivers/char/mbcs.c index 1aeaaba..47ff7e4 100644 --- a/drivers/char/mbcs.c +++ b/drivers/char/mbcs.c @@ -28,7 +28,6 @@ #include <linux/slab.h> #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <asm/sn/addrs.h> #include <asm/sn/intr.h> diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 5c0d96a..8b78750 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -44,7 +44,6 @@ #include <linux/slab.h> #include <linux/numa.h> #include <asm/page.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <linux/atomic.h> #include <asm/tlbflush.h> diff --git a/drivers/char/mwave/3780i.c b/drivers/char/mwave/3780i.c index 492dbfb..881c9e5 100644 --- a/drivers/char/mwave/3780i.c +++ b/drivers/char/mwave/3780i.c @@ -56,7 +56,6 @@ #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/irq.h> #include "smapi.h" #include "mwavedd.h" diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index eaade8a..9df78e2 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -111,7 +111,6 @@ #include <linux/uaccess.h> #include <linux/mutex.h> -#include <asm/system.h> static DEFINE_MUTEX(nvram_mutex); static DEFINE_SPINLOCK(nvram_state_lock); diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index bf586ae..d45c334 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -32,7 +32,6 @@ #include <asm/io.h> #include <asm/leds.h> #include <asm/mach-types.h> -#include <asm/system.h> #include <asm/uaccess.h> /*****************************************************************************/ diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index f6453df..0a484b4 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -60,7 +60,6 @@ #include <linux/ioctl.h> #include <linux/synclink.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 872e09a..af94374 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -83,7 +83,6 @@ #include <linux/ratelimit.h> #include <asm/current.h> -#include <asm/system.h> #ifdef CONFIG_X86 #include <asm/hpet.h> diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 1ee8ce7..45713f0 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -54,7 +54,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/system.h> #include <linux/sonypi.h> diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index e90e1c7..31ba11c 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -89,7 +89,6 @@ #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/system.h> #ifdef CONFIG_OF /* For open firmware. */ diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 9b3cd08..165e1fe 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -8,3 +8,40 @@ config HAVE_CLK_PREPARE config HAVE_MACH_CLKDEV bool + +config COMMON_CLK + bool + select HAVE_CLK_PREPARE + ---help--- + The common clock framework is a single definition of struct + clk, useful across many platforms, as well as an + implementation of the clock API in include/linux/clk.h. + Architectures utilizing the common struct clk should select + this option. + +menu "Common Clock Framework" + depends on COMMON_CLK + +config COMMON_CLK_DISABLE_UNUSED + bool "Disabled unused clocks at boot" + depends on COMMON_CLK + ---help--- + Traverses the entire clock tree and disables any clocks that are + enabled in hardware but have not been enabled by any device drivers. + This saves power and keeps the software model of the clock in line + with reality. + + If in doubt, say "N". + +config COMMON_CLK_DEBUG + bool "DebugFS representation of clock tree" + depends on COMMON_CLK + select DEBUG_FS + ---help--- + Creates a directory hierchy in debugfs for visualizing the clk + tree structure. Each directory contains read-only members + that export information specific to that clk node: clk_rate, + clk_flags, clk_prepare_count, clk_enable_count & + clk_notifier_count. + +endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 07613fa..1f736bc 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,2 +1,4 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o +obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ + clk-mux.o clk-divider.o diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c new file mode 100644 index 0000000..d5ac6a7 --- /dev/null +++ b/drivers/clk/clk-divider.c @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * Copyright (C) 2011 Richard Zhao, Linaro <richard.zhao@linaro.org> + * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adjustable divider clock implementation + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/string.h> + +/* + * DOC: basic adjustable divider clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. clk->rate = parent->rate / divisor + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) + +#define div_mask(d) ((1 << (d->width)) - 1) + +static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + unsigned int div; + + div = readl(divider->reg) >> divider->shift; + div &= div_mask(divider); + + if (!(divider->flags & CLK_DIVIDER_ONE_BASED)) + div++; + + return parent_rate / div; +} +EXPORT_SYMBOL_GPL(clk_divider_recalc_rate); + +/* + * The reverse of DIV_ROUND_UP: The maximum number which + * divided by m is r + */ +#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1) + +static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + int i, bestdiv = 0; + unsigned long parent_rate, best = 0, now, maxdiv; + + if (!rate) + rate = 1; + + maxdiv = (1 << divider->width); + + if (divider->flags & CLK_DIVIDER_ONE_BASED) + maxdiv--; + + if (!best_parent_rate) { + parent_rate = __clk_get_rate(__clk_get_parent(hw->clk)); + bestdiv = DIV_ROUND_UP(parent_rate, rate); + bestdiv = bestdiv == 0 ? 1 : bestdiv; + bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv; + return bestdiv; + } + + /* + * The maximum divider we can use without overflowing + * unsigned long in rate * i below + */ + maxdiv = min(ULONG_MAX / rate, maxdiv); + + for (i = 1; i <= maxdiv; i++) { + parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), + MULT_ROUND_UP(rate, i)); + now = parent_rate / i; + if (now <= rate && now > best) { + bestdiv = i; + best = now; + *best_parent_rate = parent_rate; + } + } + + if (!bestdiv) { + bestdiv = (1 << divider->width); + if (divider->flags & CLK_DIVIDER_ONE_BASED) + bestdiv--; + *best_parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), 1); + } + + return bestdiv; +} + +static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + int div; + div = clk_divider_bestdiv(hw, rate, prate); + + if (prate) + return *prate / div; + else { + unsigned long r; + r = __clk_get_rate(__clk_get_parent(hw->clk)); + return r / div; + } +} +EXPORT_SYMBOL_GPL(clk_divider_round_rate); + +static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + unsigned int div; + unsigned long flags = 0; + u32 val; + + div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate; + + if (!(divider->flags & CLK_DIVIDER_ONE_BASED)) + div--; + + if (div > div_mask(divider)) + div = div_mask(divider); + + if (divider->lock) + spin_lock_irqsave(divider->lock, flags); + + val = readl(divider->reg); + val &= ~(div_mask(divider) << divider->shift); + val |= div << divider->shift; + writel(val, divider->reg); + + if (divider->lock) + spin_unlock_irqrestore(divider->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(clk_divider_set_rate); + +struct clk_ops clk_divider_ops = { + .recalc_rate = clk_divider_recalc_rate, + .round_rate = clk_divider_round_rate, + .set_rate = clk_divider_set_rate, +}; +EXPORT_SYMBOL_GPL(clk_divider_ops); + +struct clk *clk_register_divider(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, spinlock_t *lock) +{ + struct clk_divider *div; + struct clk *clk; + + div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL); + + if (!div) { + pr_err("%s: could not allocate divider clk\n", __func__); + return NULL; + } + + /* struct clk_divider assignments */ + div->reg = reg; + div->shift = shift; + div->width = width; + div->flags = clk_divider_flags; + div->lock = lock; + + if (parent_name) { + div->parent[0] = kstrdup(parent_name, GFP_KERNEL); + if (!div->parent[0]) + goto out; + } + + clk = clk_register(dev, name, + &clk_divider_ops, &div->hw, + div->parent, + (parent_name ? 1 : 0), + flags); + if (clk) + return clk; + +out: + kfree(div->parent[0]); + kfree(div); + + return NULL; +} diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c new file mode 100644 index 0000000..90c79fb --- /dev/null +++ b/drivers/clk/clk-fixed-rate.c @@ -0,0 +1,82 @@ +/* + * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com> + * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Fixed rate clock implementation + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> + +/* + * DOC: basic fixed-rate clock that cannot gate + * + * Traits of this clock: + * prepare - clk_(un)prepare only ensures parents are prepared + * enable - clk_enable only ensures parents are enabled + * rate - rate is always a fixed value. No clk_set_rate support + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_fixed_rate(_hw) container_of(_hw, struct clk_fixed_rate, hw) + +static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return to_clk_fixed_rate(hw)->fixed_rate; +} +EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate); + +struct clk_ops clk_fixed_rate_ops = { + .recalc_rate = clk_fixed_rate_recalc_rate, +}; +EXPORT_SYMBOL_GPL(clk_fixed_rate_ops); + +struct clk *clk_register_fixed_rate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned long fixed_rate) +{ + struct clk_fixed_rate *fixed; + char **parent_names = NULL; + u8 len; + + fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); + + if (!fixed) { + pr_err("%s: could not allocate fixed clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_fixed_rate assignments */ + fixed->fixed_rate = fixed_rate; + + if (parent_name) { + parent_names = kmalloc(sizeof(char *), GFP_KERNEL); + + if (! parent_names) + goto out; + + len = sizeof(char) * strlen(parent_name); + + parent_names[0] = kmalloc(len, GFP_KERNEL); + + if (!parent_names[0]) + goto out; + + strncpy(parent_names[0], parent_name, len); + } + +out: + return clk_register(dev, name, + &clk_fixed_rate_ops, &fixed->hw, + parent_names, + (parent_name ? 1 : 0), + flags); +} diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c new file mode 100644 index 0000000..b5902e2 --- /dev/null +++ b/drivers/clk/clk-gate.c @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com> + * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Gated clock implementation + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/string.h> + +/** + * DOC: basic gatable clock which can gate and ungate it's ouput + * + * Traits of this clock: + * prepare - clk_(un)prepare only ensures parent is (un)prepared + * enable - clk_enable and clk_disable are functional & control gating + * rate - inherits rate from parent. No clk_set_rate support + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) + +static void clk_gate_set_bit(struct clk_gate *gate) +{ + u32 reg; + unsigned long flags = 0; + + if (gate->lock) + spin_lock_irqsave(gate->lock, flags); + + reg = readl(gate->reg); + reg |= BIT(gate->bit_idx); + writel(reg, gate->reg); + + if (gate->lock) + spin_unlock_irqrestore(gate->lock, flags); +} + +static void clk_gate_clear_bit(struct clk_gate *gate) +{ + u32 reg; + unsigned long flags = 0; + + if (gate->lock) + spin_lock_irqsave(gate->lock, flags); + + reg = readl(gate->reg); + reg &= ~BIT(gate->bit_idx); + writel(reg, gate->reg); + + if (gate->lock) + spin_unlock_irqrestore(gate->lock, flags); +} + +static int clk_gate_enable(struct clk_hw *hw) +{ + struct clk_gate *gate = to_clk_gate(hw); + + if (gate->flags & CLK_GATE_SET_TO_DISABLE) + clk_gate_clear_bit(gate); + else + clk_gate_set_bit(gate); + + return 0; +} +EXPORT_SYMBOL_GPL(clk_gate_enable); + +static void clk_gate_disable(struct clk_hw *hw) +{ + struct clk_gate *gate = to_clk_gate(hw); + + if (gate->flags & CLK_GATE_SET_TO_DISABLE) + clk_gate_set_bit(gate); + else + clk_gate_clear_bit(gate); +} +EXPORT_SYMBOL_GPL(clk_gate_disable); + +static int clk_gate_is_enabled(struct clk_hw *hw) +{ + u32 reg; + struct clk_gate *gate = to_clk_gate(hw); + + reg = readl(gate->reg); + + /* if a set bit disables this clk, flip it before masking */ + if (gate->flags & CLK_GATE_SET_TO_DISABLE) + reg ^= BIT(gate->bit_idx); + + reg &= BIT(gate->bit_idx); + + return reg ? 1 : 0; +} +EXPORT_SYMBOL_GPL(clk_gate_is_enabled); + +struct clk_ops clk_gate_ops = { + .enable = clk_gate_enable, + .disable = clk_gate_disable, + .is_enabled = clk_gate_is_enabled, +}; +EXPORT_SYMBOL_GPL(clk_gate_ops); + +struct clk *clk_register_gate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 bit_idx, + u8 clk_gate_flags, spinlock_t *lock) +{ + struct clk_gate *gate; + struct clk *clk; + + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + + if (!gate) { + pr_err("%s: could not allocate gated clk\n", __func__); + return NULL; + } + + /* struct clk_gate assignments */ + gate->reg = reg; + gate->bit_idx = bit_idx; + gate->flags = clk_gate_flags; + gate->lock = lock; + + if (parent_name) { + gate->parent[0] = kstrdup(parent_name, GFP_KERNEL); + if (!gate->parent[0]) + goto out; + } + + clk = clk_register(dev, name, + &clk_gate_ops, &gate->hw, + gate->parent, + (parent_name ? 1 : 0), + flags); + if (clk) + return clk; +out: + kfree(gate->parent[0]); + kfree(gate); + + return NULL; +} diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c new file mode 100644 index 0000000..c71ad1f --- /dev/null +++ b/drivers/clk/clk-mux.c @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * Copyright (C) 2011 Richard Zhao, Linaro <richard.zhao@linaro.org> + * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simple multiplexer clock implementation + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> + +/* + * DOC: basic adjustable multiplexer clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is only affected by parent switching. No clk_set_rate support + * parent - parent is adjustable through clk_set_parent + */ + +#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) + +static u8 clk_mux_get_parent(struct clk_hw *hw) +{ + struct clk_mux *mux = to_clk_mux(hw); + u32 val; + + /* + * FIXME need a mux-specific flag to determine if val is bitwise or numeric + * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1 + * to 0x7 (index starts at one) + * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so + * val = 0x4 really means "bit 2, index starts at bit 0" + */ + val = readl(mux->reg) >> mux->shift; + val &= (1 << mux->width) - 1; + + if (val && (mux->flags & CLK_MUX_INDEX_BIT)) + val = ffs(val) - 1; + + if (val && (mux->flags & CLK_MUX_INDEX_ONE)) + val--; + + if (val >= __clk_get_num_parents(hw->clk)) + return -EINVAL; + + return val; +} +EXPORT_SYMBOL_GPL(clk_mux_get_parent); + +static int clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_mux *mux = to_clk_mux(hw); + u32 val; + unsigned long flags = 0; + + if (mux->flags & CLK_MUX_INDEX_BIT) + index = (1 << ffs(index)); + + if (mux->flags & CLK_MUX_INDEX_ONE) + index++; + + if (mux->lock) + spin_lock_irqsave(mux->lock, flags); + + val = readl(mux->reg); + val &= ~(((1 << mux->width) - 1) << mux->shift); + val |= index << mux->shift; + writel(val, mux->reg); + + if (mux->lock) + spin_unlock_irqrestore(mux->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(clk_mux_set_parent); + +struct clk_ops clk_mux_ops = { + .get_parent = clk_mux_get_parent, + .set_parent = clk_mux_set_parent, +}; +EXPORT_SYMBOL_GPL(clk_mux_ops); + +struct clk *clk_register_mux(struct device *dev, const char *name, + char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mux_flags, spinlock_t *lock) +{ + struct clk_mux *mux; + + mux = kmalloc(sizeof(struct clk_mux), GFP_KERNEL); + + if (!mux) { + pr_err("%s: could not allocate mux clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_mux assignments */ + mux->reg = reg; + mux->shift = shift; + mux->width = width; + mux->flags = clk_mux_flags; + mux->lock = lock; + + return clk_register(dev, name, &clk_mux_ops, &mux->hw, + parent_names, num_parents, flags); +} diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c new file mode 100644 index 0000000..9cf6f59e --- /dev/null +++ b/drivers/clk/clk.c @@ -0,0 +1,1461 @@ +/* + * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com> + * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Standard functionality for the common clock API. See Documentation/clk.txt + */ + +#include <linux/clk-private.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/err.h> +#include <linux/list.h> +#include <linux/slab.h> + +static DEFINE_SPINLOCK(enable_lock); +static DEFINE_MUTEX(prepare_lock); + +static HLIST_HEAD(clk_root_list); +static HLIST_HEAD(clk_orphan_list); +static LIST_HEAD(clk_notifier_list); + +/*** debugfs support ***/ + +#ifdef CONFIG_COMMON_CLK_DEBUG +#include <linux/debugfs.h> + +static struct dentry *rootdir; +static struct dentry *orphandir; +static int inited = 0; + +/* caller must hold prepare_lock */ +static int clk_debug_create_one(struct clk *clk, struct dentry *pdentry) +{ + struct dentry *d; + int ret = -ENOMEM; + + if (!clk || !pdentry) { + ret = -EINVAL; + goto out; + } + + d = debugfs_create_dir(clk->name, pdentry); + if (!d) + goto out; + + clk->dentry = d; + + d = debugfs_create_u32("clk_rate", S_IRUGO, clk->dentry, + (u32 *)&clk->rate); + if (!d) + goto err_out; + + d = debugfs_create_x32("clk_flags", S_IRUGO, clk->dentry, + (u32 *)&clk->flags); + if (!d) + goto err_out; + + d = debugfs_create_u32("clk_prepare_count", S_IRUGO, clk->dentry, + (u32 *)&clk->prepare_count); + if (!d) + goto err_out; + + d = debugfs_create_u32("clk_enable_count", S_IRUGO, clk->dentry, + (u32 *)&clk->enable_count); + if (!d) + goto err_out; + + d = debugfs_create_u32("clk_notifier_count", S_IRUGO, clk->dentry, + (u32 *)&clk->notifier_count); + if (!d) + goto err_out; + + ret = 0; + goto out; + +err_out: + debugfs_remove(clk->dentry); +out: + return ret; +} + +/* caller must hold prepare_lock */ +static int clk_debug_create_subtree(struct clk *clk, struct dentry *pdentry) +{ + struct clk *child; + struct hlist_node *tmp; + int ret = -EINVAL;; + + if (!clk || !pdentry) + goto out; + + ret = clk_debug_create_one(clk, pdentry); + + if (ret) + goto out; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) + clk_debug_create_subtree(child, clk->dentry); + + ret = 0; +out: + return ret; +} + +/** + * clk_debug_register - add a clk node to the debugfs clk tree + * @clk: the clk being added to the debugfs clk tree + * + * Dynamically adds a clk to the debugfs clk tree if debugfs has been + * initialized. Otherwise it bails out early since the debugfs clk tree + * will be created lazily by clk_debug_init as part of a late_initcall. + * + * Caller must hold prepare_lock. Only clk_init calls this function (so + * far) so this is taken care. + */ +static int clk_debug_register(struct clk *clk) +{ + struct clk *parent; + struct dentry *pdentry; + int ret = 0; + + if (!inited) + goto out; + + parent = clk->parent; + + /* + * Check to see if a clk is a root clk. Also check that it is + * safe to add this clk to debugfs + */ + if (!parent) + if (clk->flags & CLK_IS_ROOT) + pdentry = rootdir; + else + pdentry = orphandir; + else + if (parent->dentry) + pdentry = parent->dentry; + else + goto out; + + ret = clk_debug_create_subtree(clk, pdentry); + +out: + return ret; +} + +/** + * clk_debug_init - lazily create the debugfs clk tree visualization + * + * clks are often initialized very early during boot before memory can + * be dynamically allocated and well before debugfs is setup. + * clk_debug_init walks the clk tree hierarchy while holding + * prepare_lock and creates the topology as part of a late_initcall, + * thus insuring that clks initialized very early will still be + * represented in the debugfs clk tree. This function should only be + * called once at boot-time, and all other clks added dynamically will + * be done so with clk_debug_register. + */ +static int __init clk_debug_init(void) +{ + struct clk *clk; + struct hlist_node *tmp; + + rootdir = debugfs_create_dir("clk", NULL); + + if (!rootdir) + return -ENOMEM; + + orphandir = debugfs_create_dir("orphans", rootdir); + + if (!orphandir) + return -ENOMEM; + + mutex_lock(&prepare_lock); + + hlist_for_each_entry(clk, tmp, &clk_root_list, child_node) + clk_debug_create_subtree(clk, rootdir); + + hlist_for_each_entry(clk, tmp, &clk_orphan_list, child_node) + clk_debug_create_subtree(clk, orphandir); + + inited = 1; + + mutex_unlock(&prepare_lock); + + return 0; +} +late_initcall(clk_debug_init); +#else +static inline int clk_debug_register(struct clk *clk) { return 0; } +#endif /* CONFIG_COMMON_CLK_DEBUG */ + +#ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED +/* caller must hold prepare_lock */ +static void clk_disable_unused_subtree(struct clk *clk) +{ + struct clk *child; + struct hlist_node *tmp; + unsigned long flags; + + if (!clk) + goto out; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) + clk_disable_unused_subtree(child); + + spin_lock_irqsave(&enable_lock, flags); + + if (clk->enable_count) + goto unlock_out; + + if (clk->flags & CLK_IGNORE_UNUSED) + goto unlock_out; + + if (__clk_is_enabled(clk) && clk->ops->disable) + clk->ops->disable(clk->hw); + +unlock_out: + spin_unlock_irqrestore(&enable_lock, flags); + +out: + return; +} + +static int clk_disable_unused(void) +{ + struct clk *clk; + struct hlist_node *tmp; + + mutex_lock(&prepare_lock); + + hlist_for_each_entry(clk, tmp, &clk_root_list, child_node) + clk_disable_unused_subtree(clk); + + hlist_for_each_entry(clk, tmp, &clk_orphan_list, child_node) + clk_disable_unused_subtree(clk); + + mutex_unlock(&prepare_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#else +static inline int clk_disable_unused(struct clk *clk) { return 0; } +#endif /* CONFIG_COMMON_CLK_DISABLE_UNUSED */ + +/*** helper functions ***/ + +inline const char *__clk_get_name(struct clk *clk) +{ + return !clk ? NULL : clk->name; +} + +inline struct clk_hw *__clk_get_hw(struct clk *clk) +{ + return !clk ? NULL : clk->hw; +} + +inline u8 __clk_get_num_parents(struct clk *clk) +{ + return !clk ? -EINVAL : clk->num_parents; +} + +inline struct clk *__clk_get_parent(struct clk *clk) +{ + return !clk ? NULL : clk->parent; +} + +inline int __clk_get_enable_count(struct clk *clk) +{ + return !clk ? -EINVAL : clk->enable_count; +} + +inline int __clk_get_prepare_count(struct clk *clk) +{ + return !clk ? -EINVAL : clk->prepare_count; +} + +unsigned long __clk_get_rate(struct clk *clk) +{ + unsigned long ret; + + if (!clk) { + ret = -EINVAL; + goto out; + } + + ret = clk->rate; + + if (clk->flags & CLK_IS_ROOT) + goto out; + + if (!clk->parent) + ret = -ENODEV; + +out: + return ret; +} + +inline unsigned long __clk_get_flags(struct clk *clk) +{ + return !clk ? -EINVAL : clk->flags; +} + +int __clk_is_enabled(struct clk *clk) +{ + int ret; + + if (!clk) + return -EINVAL; + + /* + * .is_enabled is only mandatory for clocks that gate + * fall back to software usage counter if .is_enabled is missing + */ + if (!clk->ops->is_enabled) { + ret = clk->enable_count ? 1 : 0; + goto out; + } + + ret = clk->ops->is_enabled(clk->hw); +out: + return ret; +} + +static struct clk *__clk_lookup_subtree(const char *name, struct clk *clk) +{ + struct clk *child; + struct clk *ret; + struct hlist_node *tmp; + + if (!strcmp(clk->name, name)) + return clk; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) { + ret = __clk_lookup_subtree(name, child); + if (ret) + return ret; + } + + return NULL; +} + +struct clk *__clk_lookup(const char *name) +{ + struct clk *root_clk; + struct clk *ret; + struct hlist_node *tmp; + + if (!name) + return NULL; + + /* search the 'proper' clk tree first */ + hlist_for_each_entry(root_clk, tmp, &clk_root_list, child_node) { + ret = __clk_lookup_subtree(name, root_clk); + if (ret) + return ret; + } + + /* if not found, then search the orphan tree */ + hlist_for_each_entry(root_clk, tmp, &clk_orphan_list, child_node) { + ret = __clk_lookup_subtree(name, root_clk); + if (ret) + return ret; + } + + return NULL; +} + +/*** clk api ***/ + +void __clk_unprepare(struct clk *clk) +{ + if (!clk) + return; + + if (WARN_ON(clk->prepare_count == 0)) + return; + + if (--clk->prepare_count > 0) + return; + + WARN_ON(clk->enable_count > 0); + + if (clk->ops->unprepare) + clk->ops->unprepare(clk->hw); + + __clk_unprepare(clk->parent); +} + +/** + * clk_unprepare - undo preparation of a clock source + * @clk: the clk being unprepare + * + * clk_unprepare may sleep, which differentiates it from clk_disable. In a + * simple case, clk_unprepare can be used instead of clk_disable to gate a clk + * if the operation may sleep. One example is a clk which is accessed over + * I2c. In the complex case a clk gate operation may require a fast and a slow + * part. It is this reason that clk_unprepare and clk_disable are not mutually + * exclusive. In fact clk_disable must be called before clk_unprepare. + */ +void clk_unprepare(struct clk *clk) +{ + mutex_lock(&prepare_lock); + __clk_unprepare(clk); + mutex_unlock(&prepare_lock); +} +EXPORT_SYMBOL_GPL(clk_unprepare); + +int __clk_prepare(struct clk *clk) +{ + int ret = 0; + + if (!clk) + return 0; + + if (clk->prepare_count == 0) { + ret = __clk_prepare(clk->parent); + if (ret) + return ret; + + if (clk->ops->prepare) { + ret = clk->ops->prepare(clk->hw); + if (ret) { + __clk_unprepare(clk->parent); + return ret; + } + } + } + + clk->prepare_count++; + + return 0; +} + +/** + * clk_prepare - prepare a clock source + * @clk: the clk being prepared + * + * clk_prepare may sleep, which differentiates it from clk_enable. In a simple + * case, clk_prepare can be used instead of clk_enable to ungate a clk if the + * operation may sleep. One example is a clk which is accessed over I2c. In + * the complex case a clk ungate operation may require a fast and a slow part. + * It is this reason that clk_prepare and clk_enable are not mutually + * exclusive. In fact clk_prepare must be called before clk_enable. + * Returns 0 on success, -EERROR otherwise. + */ +int clk_prepare(struct clk *clk) +{ + int ret; + + mutex_lock(&prepare_lock); + ret = __clk_prepare(clk); + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_prepare); + +static void __clk_disable(struct clk *clk) +{ + if (!clk) + return; + + if (WARN_ON(clk->enable_count == 0)) + return; + + if (--clk->enable_count > 0) + return; + + if (clk->ops->disable) + clk->ops->disable(clk->hw); + + __clk_disable(clk->parent); +} + +/** + * clk_disable - gate a clock + * @clk: the clk being gated + * + * clk_disable must not sleep, which differentiates it from clk_unprepare. In + * a simple case, clk_disable can be used instead of clk_unprepare to gate a + * clk if the operation is fast and will never sleep. One example is a + * SoC-internal clk which is controlled via simple register writes. In the + * complex case a clk gate operation may require a fast and a slow part. It is + * this reason that clk_unprepare and clk_disable are not mutually exclusive. + * In fact clk_disable must be called before clk_unprepare. + */ +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&enable_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&enable_lock, flags); +} +EXPORT_SYMBOL_GPL(clk_disable); + +static int __clk_enable(struct clk *clk) +{ + int ret = 0; + + if (!clk) + return 0; + + if (WARN_ON(clk->prepare_count == 0)) + return -ESHUTDOWN; + + if (clk->enable_count == 0) { + ret = __clk_enable(clk->parent); + + if (ret) + return ret; + + if (clk->ops->enable) { + ret = clk->ops->enable(clk->hw); + if (ret) { + __clk_disable(clk->parent); + return ret; + } + } + } + + clk->enable_count++; + return 0; +} + +/** + * clk_enable - ungate a clock + * @clk: the clk being ungated + * + * clk_enable must not sleep, which differentiates it from clk_prepare. In a + * simple case, clk_enable can be used instead of clk_prepare to ungate a clk + * if the operation will never sleep. One example is a SoC-internal clk which + * is controlled via simple register writes. In the complex case a clk ungate + * operation may require a fast and a slow part. It is this reason that + * clk_enable and clk_prepare are not mutually exclusive. In fact clk_prepare + * must be called before clk_enable. Returns 0 on success, -EERROR + * otherwise. + */ +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&enable_lock, flags); + ret = __clk_enable(clk); + spin_unlock_irqrestore(&enable_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_enable); + +/** + * clk_get_rate - return the rate of clk + * @clk: the clk whose rate is being returned + * + * Simply returns the cached rate of the clk. Does not query the hardware. If + * clk is NULL then returns -EINVAL. + */ +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long rate; + + mutex_lock(&prepare_lock); + rate = __clk_get_rate(clk); + mutex_unlock(&prepare_lock); + + return rate; +} +EXPORT_SYMBOL_GPL(clk_get_rate); + +/** + * __clk_round_rate - round the given rate for a clk + * @clk: round the rate of this clock + * + * Caller must hold prepare_lock. Useful for clk_ops such as .set_rate + */ +unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long unused; + + if (!clk) + return -EINVAL; + + if (!clk->ops->round_rate) + return clk->rate; + + if (clk->flags & CLK_SET_RATE_PARENT) + return clk->ops->round_rate(clk->hw, rate, &unused); + else + return clk->ops->round_rate(clk->hw, rate, NULL); +} + +/** + * clk_round_rate - round the given rate for a clk + * @clk: the clk for which we are rounding a rate + * @rate: the rate which is to be rounded + * + * Takes in a rate as input and rounds it to a rate that the clk can actually + * use which is then returned. If clk doesn't support round_rate operation + * then the parent rate is returned. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long ret; + + mutex_lock(&prepare_lock); + ret = __clk_round_rate(clk, rate); + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_round_rate); + +/** + * __clk_notify - call clk notifier chain + * @clk: struct clk * that is changing rate + * @msg: clk notifier type (see include/linux/clk.h) + * @old_rate: old clk rate + * @new_rate: new clk rate + * + * Triggers a notifier call chain on the clk rate-change notification + * for 'clk'. Passes a pointer to the struct clk and the previous + * and current rates to the notifier callback. Intended to be called by + * internal clock code only. Returns NOTIFY_DONE from the last driver + * called if all went well, or NOTIFY_STOP or NOTIFY_BAD immediately if + * a driver returns that. + */ +static int __clk_notify(struct clk *clk, unsigned long msg, + unsigned long old_rate, unsigned long new_rate) +{ + struct clk_notifier *cn; + struct clk_notifier_data cnd; + int ret = NOTIFY_DONE; + + cnd.clk = clk; + cnd.old_rate = old_rate; + cnd.new_rate = new_rate; + + list_for_each_entry(cn, &clk_notifier_list, node) { + if (cn->clk == clk) { + ret = srcu_notifier_call_chain(&cn->notifier_head, msg, + &cnd); + break; + } + } + + return ret; +} + +/** + * __clk_recalc_rates + * @clk: first clk in the subtree + * @msg: notification type (see include/linux/clk.h) + * + * Walks the subtree of clks starting with clk and recalculates rates as it + * goes. Note that if a clk does not implement the .recalc_rate callback then + * it is assumed that the clock will take on the rate of it's parent. + * + * clk_recalc_rates also propagates the POST_RATE_CHANGE notification, + * if necessary. + * + * Caller must hold prepare_lock. + */ +static void __clk_recalc_rates(struct clk *clk, unsigned long msg) +{ + unsigned long old_rate; + unsigned long parent_rate = 0; + struct hlist_node *tmp; + struct clk *child; + + old_rate = clk->rate; + + if (clk->parent) + parent_rate = clk->parent->rate; + + if (clk->ops->recalc_rate) + clk->rate = clk->ops->recalc_rate(clk->hw, parent_rate); + else + clk->rate = parent_rate; + + /* + * ignore NOTIFY_STOP and NOTIFY_BAD return values for POST_RATE_CHANGE + * & ABORT_RATE_CHANGE notifiers + */ + if (clk->notifier_count && msg) + __clk_notify(clk, msg, old_rate, clk->rate); + + hlist_for_each_entry(child, tmp, &clk->children, child_node) + __clk_recalc_rates(child, msg); +} + +/** + * __clk_speculate_rates + * @clk: first clk in the subtree + * @parent_rate: the "future" rate of clk's parent + * + * Walks the subtree of clks starting with clk, speculating rates as it + * goes and firing off PRE_RATE_CHANGE notifications as necessary. + * + * Unlike clk_recalc_rates, clk_speculate_rates exists only for sending + * pre-rate change notifications and returns early if no clks in the + * subtree have subscribed to the notifications. Note that if a clk does not + * implement the .recalc_rate callback then it is assumed that the clock will + * take on the rate of it's parent. + * + * Caller must hold prepare_lock. + */ +static int __clk_speculate_rates(struct clk *clk, unsigned long parent_rate) +{ + struct hlist_node *tmp; + struct clk *child; + unsigned long new_rate; + int ret = NOTIFY_DONE; + + if (clk->ops->recalc_rate) + new_rate = clk->ops->recalc_rate(clk->hw, parent_rate); + else + new_rate = parent_rate; + + /* abort the rate change if a driver returns NOTIFY_BAD */ + if (clk->notifier_count) + ret = __clk_notify(clk, PRE_RATE_CHANGE, clk->rate, new_rate); + + if (ret == NOTIFY_BAD) + goto out; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) { + ret = __clk_speculate_rates(child, new_rate); + if (ret == NOTIFY_BAD) + break; + } + +out: + return ret; +} + +static void clk_calc_subtree(struct clk *clk, unsigned long new_rate) +{ + struct clk *child; + struct hlist_node *tmp; + + clk->new_rate = new_rate; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) { + if (child->ops->recalc_rate) + child->new_rate = child->ops->recalc_rate(child->hw, new_rate); + else + child->new_rate = new_rate; + clk_calc_subtree(child, child->new_rate); + } +} + +/* + * calculate the new rates returning the topmost clock that has to be + * changed. + */ +static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) +{ + struct clk *top = clk; + unsigned long best_parent_rate = clk->parent->rate; + unsigned long new_rate; + + if (!clk->ops->round_rate && !(clk->flags & CLK_SET_RATE_PARENT)) { + clk->new_rate = clk->rate; + return NULL; + } + + if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) { + top = clk_calc_new_rates(clk->parent, rate); + new_rate = clk->new_rate = clk->parent->new_rate; + + goto out; + } + + if (clk->flags & CLK_SET_RATE_PARENT) + new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); + else + new_rate = clk->ops->round_rate(clk->hw, rate, NULL); + + if (best_parent_rate != clk->parent->rate) { + top = clk_calc_new_rates(clk->parent, best_parent_rate); + + goto out; + } + +out: + clk_calc_subtree(clk, new_rate); + + return top; +} + +/* + * Notify about rate changes in a subtree. Always walk down the whole tree + * so that in case of an error we can walk down the whole tree again and + * abort the change. + */ +static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long event) +{ + struct hlist_node *tmp; + struct clk *child, *fail_clk = NULL; + int ret = NOTIFY_DONE; + + if (clk->rate == clk->new_rate) + return 0; + + if (clk->notifier_count) { + ret = __clk_notify(clk, event, clk->rate, clk->new_rate); + if (ret == NOTIFY_BAD) + fail_clk = clk; + } + + hlist_for_each_entry(child, tmp, &clk->children, child_node) { + clk = clk_propagate_rate_change(child, event); + if (clk) + fail_clk = clk; + } + + return fail_clk; +} + +/* + * walk down a subtree and set the new rates notifying the rate + * change on the way + */ +static void clk_change_rate(struct clk *clk) +{ + struct clk *child; + unsigned long old_rate; + struct hlist_node *tmp; + + old_rate = clk->rate; + + if (clk->ops->set_rate) + clk->ops->set_rate(clk->hw, clk->new_rate); + + if (clk->ops->recalc_rate) + clk->rate = clk->ops->recalc_rate(clk->hw, + clk->parent->rate); + else + clk->rate = clk->parent->rate; + + if (clk->notifier_count && old_rate != clk->rate) + __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); + + hlist_for_each_entry(child, tmp, &clk->children, child_node) + clk_change_rate(child); +} + +/** + * clk_set_rate - specify a new rate for clk + * @clk: the clk whose rate is being changed + * @rate: the new rate for clk + * + * In the simplest case clk_set_rate will only change the rate of clk. + * + * If clk has the CLK_SET_RATE_GATE flag set and it is enabled this call + * will fail; only when the clk is disabled will it be able to change + * its rate. + * + * Setting the CLK_SET_RATE_PARENT flag allows clk_set_rate to + * recursively propagate up to clk's parent; whether or not this happens + * depends on the outcome of clk's .round_rate implementation. If + * *parent_rate is 0 after calling .round_rate then upstream parent + * propagation is ignored. If *parent_rate comes back with a new rate + * for clk's parent then we propagate up to clk's parent and set it's + * rate. Upward propagation will continue until either a clk does not + * support the CLK_SET_RATE_PARENT flag or .round_rate stops requesting + * changes to clk's parent_rate. If there is a failure during upstream + * propagation then clk_set_rate will unwind and restore each clk's rate + * that had been successfully changed. Afterwards a rate change abort + * notification will be propagated downstream, starting from the clk + * that failed. + * + * At the end of all of the rate setting, clk_set_rate internally calls + * __clk_recalc_rates and propagates the rate changes downstream, + * starting from the highest clk whose rate was changed. This has the + * added benefit of propagating post-rate change notifiers. + * + * Note that while post-rate change and rate change abort notifications + * are guaranteed to be sent to a clk only once per call to + * clk_set_rate, pre-change notifications will be sent for every clk + * whose rate is changed. Stacking pre-change notifications is noisy + * for the drivers subscribed to them, but this allows drivers to react + * to intermediate clk rate changes up until the point where the final + * rate is achieved at the end of upstream propagation. + * + * Returns 0 on success, -EERROR otherwise. + */ +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *top, *fail_clk; + int ret = 0; + + /* prevent racing with updates to the clock topology */ + mutex_lock(&prepare_lock); + + /* bail early if nothing to do */ + if (rate == clk->rate) + goto out; + + /* calculate new rates and get the topmost changed clock */ + top = clk_calc_new_rates(clk, rate); + if (!top) { + ret = -EINVAL; + goto out; + } + + /* notify that we are about to change rates */ + fail_clk = clk_propagate_rate_change(top, PRE_RATE_CHANGE); + if (fail_clk) { + pr_warn("%s: failed to set %s rate\n", __func__, + fail_clk->name); + clk_propagate_rate_change(top, ABORT_RATE_CHANGE); + ret = -EBUSY; + goto out; + } + + /* change the rates */ + clk_change_rate(top); + + mutex_unlock(&prepare_lock); + + return 0; +out: + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +/** + * clk_get_parent - return the parent of a clk + * @clk: the clk whose parent gets returned + * + * Simply returns clk->parent. Returns NULL if clk is NULL. + */ +struct clk *clk_get_parent(struct clk *clk) +{ + struct clk *parent; + + mutex_lock(&prepare_lock); + parent = __clk_get_parent(clk); + mutex_unlock(&prepare_lock); + + return parent; +} +EXPORT_SYMBOL_GPL(clk_get_parent); + +/* + * .get_parent is mandatory for clocks with multiple possible parents. It is + * optional for single-parent clocks. Always call .get_parent if it is + * available and WARN if it is missing for multi-parent clocks. + * + * For single-parent clocks without .get_parent, first check to see if the + * .parents array exists, and if so use it to avoid an expensive tree + * traversal. If .parents does not exist then walk the tree with __clk_lookup. + */ +static struct clk *__clk_init_parent(struct clk *clk) +{ + struct clk *ret = NULL; + u8 index; + + /* handle the trivial cases */ + + if (!clk->num_parents) + goto out; + + if (clk->num_parents == 1) { + if (IS_ERR_OR_NULL(clk->parent)) + ret = clk->parent = __clk_lookup(clk->parent_names[0]); + ret = clk->parent; + goto out; + } + + if (!clk->ops->get_parent) { + WARN(!clk->ops->get_parent, + "%s: multi-parent clocks must implement .get_parent\n", + __func__); + goto out; + }; + + /* + * Do our best to cache parent clocks in clk->parents. This prevents + * unnecessary and expensive calls to __clk_lookup. We don't set + * clk->parent here; that is done by the calling function + */ + + index = clk->ops->get_parent(clk->hw); + + if (!clk->parents) + clk->parents = + kmalloc((sizeof(struct clk*) * clk->num_parents), + GFP_KERNEL); + + if (!clk->parents) + ret = __clk_lookup(clk->parent_names[index]); + else if (!clk->parents[index]) + ret = clk->parents[index] = + __clk_lookup(clk->parent_names[index]); + else + ret = clk->parents[index]; + +out: + return ret; +} + +void __clk_reparent(struct clk *clk, struct clk *new_parent) +{ +#ifdef CONFIG_COMMON_CLK_DEBUG + struct dentry *d; + struct dentry *new_parent_d; +#endif + + if (!clk || !new_parent) + return; + + hlist_del(&clk->child_node); + + if (new_parent) + hlist_add_head(&clk->child_node, &new_parent->children); + else + hlist_add_head(&clk->child_node, &clk_orphan_list); + +#ifdef CONFIG_COMMON_CLK_DEBUG + if (!inited) + goto out; + + if (new_parent) + new_parent_d = new_parent->dentry; + else + new_parent_d = orphandir; + + d = debugfs_rename(clk->dentry->d_parent, clk->dentry, + new_parent_d, clk->name); + if (d) + clk->dentry = d; + else + pr_debug("%s: failed to rename debugfs entry for %s\n", + __func__, clk->name); +out: +#endif + + clk->parent = new_parent; + + __clk_recalc_rates(clk, POST_RATE_CHANGE); +} + +static int __clk_set_parent(struct clk *clk, struct clk *parent) +{ + struct clk *old_parent; + unsigned long flags; + int ret = -EINVAL; + u8 i; + + old_parent = clk->parent; + + /* find index of new parent clock using cached parent ptrs */ + for (i = 0; i < clk->num_parents; i++) + if (clk->parents[i] == parent) + break; + + /* + * find index of new parent clock using string name comparison + * also try to cache the parent to avoid future calls to __clk_lookup + */ + if (i == clk->num_parents) + for (i = 0; i < clk->num_parents; i++) + if (!strcmp(clk->parent_names[i], parent->name)) { + clk->parents[i] = __clk_lookup(parent->name); + break; + } + + if (i == clk->num_parents) { + pr_debug("%s: clock %s is not a possible parent of clock %s\n", + __func__, parent->name, clk->name); + goto out; + } + + /* migrate prepare and enable */ + if (clk->prepare_count) + __clk_prepare(parent); + + /* FIXME replace with clk_is_enabled(clk) someday */ + spin_lock_irqsave(&enable_lock, flags); + if (clk->enable_count) + __clk_enable(parent); + spin_unlock_irqrestore(&enable_lock, flags); + + /* change clock input source */ + ret = clk->ops->set_parent(clk->hw, i); + + /* clean up old prepare and enable */ + spin_lock_irqsave(&enable_lock, flags); + if (clk->enable_count) + __clk_disable(old_parent); + spin_unlock_irqrestore(&enable_lock, flags); + + if (clk->prepare_count) + __clk_unprepare(old_parent); + +out: + return ret; +} + +/** + * clk_set_parent - switch the parent of a mux clk + * @clk: the mux clk whose input we are switching + * @parent: the new input to clk + * + * Re-parent clk to use parent as it's new input source. If clk has the + * CLK_SET_PARENT_GATE flag set then clk must be gated for this + * operation to succeed. After successfully changing clk's parent + * clk_set_parent will update the clk topology, sysfs topology and + * propagate rate recalculation via __clk_recalc_rates. Returns 0 on + * success, -EERROR otherwise. + */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = 0; + + if (!clk || !clk->ops) + return -EINVAL; + + if (!clk->ops->set_parent) + return -ENOSYS; + + /* prevent racing with updates to the clock topology */ + mutex_lock(&prepare_lock); + + if (clk->parent == parent) + goto out; + + /* propagate PRE_RATE_CHANGE notifications */ + if (clk->notifier_count) + ret = __clk_speculate_rates(clk, parent->rate); + + /* abort if a driver objects */ + if (ret == NOTIFY_STOP) + goto out; + + /* only re-parent if the clock is not in use */ + if ((clk->flags & CLK_SET_PARENT_GATE) && clk->prepare_count) + ret = -EBUSY; + else + ret = __clk_set_parent(clk, parent); + + /* propagate ABORT_RATE_CHANGE if .set_parent failed */ + if (ret) { + __clk_recalc_rates(clk, ABORT_RATE_CHANGE); + goto out; + } + + /* propagate rate recalculation downstream */ + __clk_reparent(clk, parent); + +out: + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_parent); + +/** + * __clk_init - initialize the data structures in a struct clk + * @dev: device initializing this clk, placeholder for now + * @clk: clk being initialized + * + * Initializes the lists in struct clk, queries the hardware for the + * parent and rate and sets them both. + * + * Any struct clk passed into __clk_init must have the following members + * populated: + * .name + * .ops + * .hw + * .parent_names + * .num_parents + * .flags + * + * Essentially, everything that would normally be passed into clk_register is + * assumed to be initialized already in __clk_init. The other members may be + * populated, but are optional. + * + * __clk_init is only exposed via clk-private.h and is intended for use with + * very large numbers of clocks that need to be statically initialized. It is + * a layering violation to include clk-private.h from any code which implements + * a clock's .ops; as such any statically initialized clock data MUST be in a + * separate C file from the logic that implements it's operations. + */ +void __clk_init(struct device *dev, struct clk *clk) +{ + int i; + struct clk *orphan; + struct hlist_node *tmp, *tmp2; + + if (!clk) + return; + + mutex_lock(&prepare_lock); + + /* check to see if a clock with this name is already registered */ + if (__clk_lookup(clk->name)) + goto out; + + /* throw a WARN if any entries in parent_names are NULL */ + for (i = 0; i < clk->num_parents; i++) + WARN(!clk->parent_names[i], + "%s: invalid NULL in %s's .parent_names\n", + __func__, clk->name); + + /* + * Allocate an array of struct clk *'s to avoid unnecessary string + * look-ups of clk's possible parents. This can fail for clocks passed + * in to clk_init during early boot; thus any access to clk->parents[] + * must always check for a NULL pointer and try to populate it if + * necessary. + * + * If clk->parents is not NULL we skip this entire block. This allows + * for clock drivers to statically initialize clk->parents. + */ + if (clk->num_parents && !clk->parents) { + clk->parents = kmalloc((sizeof(struct clk*) * clk->num_parents), + GFP_KERNEL); + /* + * __clk_lookup returns NULL for parents that have not been + * clk_init'd; thus any access to clk->parents[] must check + * for a NULL pointer. We can always perform lazy lookups for + * missing parents later on. + */ + if (clk->parents) + for (i = 0; i < clk->num_parents; i++) + clk->parents[i] = + __clk_lookup(clk->parent_names[i]); + } + + clk->parent = __clk_init_parent(clk); + + /* + * Populate clk->parent if parent has already been __clk_init'd. If + * parent has not yet been __clk_init'd then place clk in the orphan + * list. If clk has set the CLK_IS_ROOT flag then place it in the root + * clk list. + * + * Every time a new clk is clk_init'd then we walk the list of orphan + * clocks and re-parent any that are children of the clock currently + * being clk_init'd. + */ + if (clk->parent) + hlist_add_head(&clk->child_node, + &clk->parent->children); + else if (clk->flags & CLK_IS_ROOT) + hlist_add_head(&clk->child_node, &clk_root_list); + else + hlist_add_head(&clk->child_node, &clk_orphan_list); + + /* + * Set clk's rate. The preferred method is to use .recalc_rate. For + * simple clocks and lazy developers the default fallback is to use the + * parent's rate. If a clock doesn't have a parent (or is orphaned) + * then rate is set to zero. + */ + if (clk->ops->recalc_rate) + clk->rate = clk->ops->recalc_rate(clk->hw, + __clk_get_rate(clk->parent)); + else if (clk->parent) + clk->rate = clk->parent->rate; + else + clk->rate = 0; + + /* + * walk the list of orphan clocks and reparent any that are children of + * this clock + */ + hlist_for_each_entry_safe(orphan, tmp, tmp2, &clk_orphan_list, child_node) + for (i = 0; i < orphan->num_parents; i++) + if (!strcmp(clk->name, orphan->parent_names[i])) { + __clk_reparent(orphan, clk); + break; + } + + /* + * optional platform-specific magic + * + * The .init callback is not used by any of the basic clock types, but + * exists for weird hardware that must perform initialization magic. + * Please consider other ways of solving initialization problems before + * using this callback, as it's use is discouraged. + */ + if (clk->ops->init) + clk->ops->init(clk->hw); + + clk_debug_register(clk); + +out: + mutex_unlock(&prepare_lock); + + return; +} + +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @name: clock name + * @ops: operations this clock supports + * @hw: link to hardware-specific clock data + * @parent_names: array of string names for all possible parents + * @num_parents: number of possible parents + * @flags: framework-level hints and quirks + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. + */ +struct clk *clk_register(struct device *dev, const char *name, + const struct clk_ops *ops, struct clk_hw *hw, + char **parent_names, u8 num_parents, unsigned long flags) +{ + struct clk *clk; + + clk = kzalloc(sizeof(*clk), GFP_KERNEL); + if (!clk) + return NULL; + + clk->name = name; + clk->ops = ops; + clk->hw = hw; + clk->flags = flags; + clk->parent_names = parent_names; + clk->num_parents = num_parents; + hw->clk = clk; + + __clk_init(dev, clk); + + return clk; +} +EXPORT_SYMBOL_GPL(clk_register); + +/*** clk rate change notifiers ***/ + +/** + * clk_notifier_register - add a clk rate change notifier + * @clk: struct clk * to watch + * @nb: struct notifier_block * with callback info + * + * Request notification when clk's rate changes. This uses an SRCU + * notifier because we want it to block and notifier unregistrations are + * uncommon. The callbacks associated with the notifier must not + * re-enter into the clk framework by calling any top-level clk APIs; + * this will cause a nested prepare_lock mutex. + * + * Pre-change notifier callbacks will be passed the current, pre-change + * rate of the clk via struct clk_notifier_data.old_rate. The new, + * post-change rate of the clk is passed via struct + * clk_notifier_data.new_rate. + * + * Post-change notifiers will pass the now-current, post-change rate of + * the clk in both struct clk_notifier_data.old_rate and struct + * clk_notifier_data.new_rate. + * + * Abort-change notifiers are effectively the opposite of pre-change + * notifiers: the original pre-change clk rate is passed in via struct + * clk_notifier_data.new_rate and the failed post-change rate is passed + * in via struct clk_notifier_data.old_rate. + * + * clk_notifier_register() must be called from non-atomic context. + * Returns -EINVAL if called with null arguments, -ENOMEM upon + * allocation failure; otherwise, passes along the return value of + * srcu_notifier_chain_register(). + */ +int clk_notifier_register(struct clk *clk, struct notifier_block *nb) +{ + struct clk_notifier *cn; + int ret = -ENOMEM; + + if (!clk || !nb) + return -EINVAL; + + mutex_lock(&prepare_lock); + + /* search the list of notifiers for this clk */ + list_for_each_entry(cn, &clk_notifier_list, node) + if (cn->clk == clk) + break; + + /* if clk wasn't in the notifier list, allocate new clk_notifier */ + if (cn->clk != clk) { + cn = kzalloc(sizeof(struct clk_notifier), GFP_KERNEL); + if (!cn) + goto out; + + cn->clk = clk; + srcu_init_notifier_head(&cn->notifier_head); + + list_add(&cn->node, &clk_notifier_list); + } + + ret = srcu_notifier_chain_register(&cn->notifier_head, nb); + + clk->notifier_count++; + +out: + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_notifier_register); + +/** + * clk_notifier_unregister - remove a clk rate change notifier + * @clk: struct clk * + * @nb: struct notifier_block * with callback info + * + * Request no further notification for changes to 'clk' and frees memory + * allocated in clk_notifier_register. + * + * Returns -EINVAL if called with null arguments; otherwise, passes + * along the return value of srcu_notifier_chain_unregister(). + */ +int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) +{ + struct clk_notifier *cn = NULL; + int ret = -EINVAL; + + if (!clk || !nb) + return -EINVAL; + + mutex_lock(&prepare_lock); + + list_for_each_entry(cn, &clk_notifier_list, node) + if (cn->clk == clk) + break; + + if (cn->clk == clk) { + ret = srcu_notifier_chain_unregister(&cn->notifier_head, nb); + + clk->notifier_count--; + + /* XXX the notifier code should handle this better */ + if (!cn->notifier_head.head) { + srcu_cleanup_notifier_head(&cn->notifier_head); + kfree(cn); + } + + } else { + ret = -ENOENT; + } + + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_notifier_unregister); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 999d6a0..5138927 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -26,7 +26,6 @@ config CLKSRC_DBX500_PRCMU config CLKSRC_DBX500_PRCMU_SCHED_CLOCK bool "Clocksource PRCMU Timer sched_clock" depends on (CLKSRC_DBX500_PRCMU && !NOMADIK_MTU_SCHED_CLOCK) - select HAVE_SCHED_CLOCK default y help Use the always on PRCMU Timer as sched_clock diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c index f500201..0bf1b89 100644 --- a/drivers/cpufreq/db8500-cpufreq.c +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -22,11 +22,11 @@ static struct cpufreq_frequency_table freq_table[] = { }, [1] = { .index = 1, - .frequency = 300000, + .frequency = 400000, }, [2] = { .index = 2, - .frequency = 600000, + .frequency = 800000, }, [3] = { /* Used for MAX_OPP, if available */ @@ -113,12 +113,9 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table)); - if (!prcmu_is_u8400()) { - freq_table[1].frequency = 400000; - freq_table[2].frequency = 800000; - if (prcmu_has_arm_maxopp()) - freq_table[3].frequency = 1000000; - } + if (prcmu_has_arm_maxopp()) + freq_table[3].frequency = 1000000; + pr_info("db8500-cpufreq : Available frequencies:\n"); for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) pr_info(" %d Mhz\n", freq_table[i].frequency/1000); @@ -145,7 +142,7 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */ /* policy sharing between dual CPUs */ - cpumask_copy(policy->cpus, &cpu_present_map); + cpumask_copy(policy->cpus, cpu_present_mask); policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 67bbb06..17fa04d 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -27,7 +27,6 @@ #include <linux/module.h> #include <linux/regulator/consumer.h> -#include <asm/system.h> #include <asm/smp_plat.h> #include <asm/cpu.h> diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index cf7e1ee..334cc2f 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -27,7 +27,6 @@ #include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ #include <asm/msr.h> -#include <asm/system.h> #include <asm/cpu_device_id.h> #ifdef CONFIG_X86_POWERNOW_K7_ACPI diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 6588f43..87411ce 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -53,6 +53,52 @@ static void cpuidle_kick_cpus(void) {} static int __cpuidle_register_device(struct cpuidle_device *dev); +static inline int cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + struct cpuidle_state *target_state = &drv->states[index]; + return target_state->enter(dev, drv, index); +} + +static inline int cpuidle_enter_tk(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + return cpuidle_wrap_enter(dev, drv, index, cpuidle_enter); +} + +typedef int (*cpuidle_enter_t)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); + +static cpuidle_enter_t cpuidle_enter_ops; + +/** + * cpuidle_play_dead - cpu off-lining + * + * Only returns in case of an error + */ +int cpuidle_play_dead(void) +{ + struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); + struct cpuidle_driver *drv = cpuidle_get_driver(); + int i, dead_state = -1; + int power_usage = -1; + + /* Find lowest-power state that supports long-term idle */ + for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { + struct cpuidle_state *s = &drv->states[i]; + + if (s->power_usage < power_usage && s->enter_dead) { + power_usage = s->power_usage; + dead_state = i; + } + } + + if (dead_state != -1) + return drv->states[dead_state].enter_dead(dev, dead_state); + + return -ENODEV; +} + /** * cpuidle_idle_call - the main idle loop * @@ -63,7 +109,6 @@ int cpuidle_idle_call(void) { struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); struct cpuidle_driver *drv = cpuidle_get_driver(); - struct cpuidle_state *target_state; int next_state, entered_state; if (off) @@ -92,12 +137,10 @@ int cpuidle_idle_call(void) return 0; } - target_state = &drv->states[next_state]; - trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu); trace_cpu_idle_rcuidle(next_state, dev->cpu); - entered_state = target_state->enter(dev, drv, next_state); + entered_state = cpuidle_enter_ops(dev, drv, next_state); trace_power_end_rcuidle(dev->cpu); trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu); @@ -110,6 +153,8 @@ int cpuidle_idle_call(void) dev->states_usage[entered_state].time += (unsigned long long)dev->last_residency; dev->states_usage[entered_state].usage++; + } else { + dev->last_residency = 0; } /* give the governor an opportunity to reflect on the outcome */ @@ -164,6 +209,37 @@ void cpuidle_resume_and_unlock(void) EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock); +/** + * cpuidle_wrap_enter - performs timekeeping and irqen around enter function + * @dev: pointer to a valid cpuidle_device object + * @drv: pointer to a valid cpuidle_driver object + * @index: index of the target cpuidle state. + */ +int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)) +{ + ktime_t time_start, time_end; + s64 diff; + + time_start = ktime_get(); + + index = enter(dev, drv, index); + + time_end = ktime_get(); + + local_irq_enable(); + + diff = ktime_to_us(ktime_sub(time_end, time_start)); + if (diff > INT_MAX) + diff = INT_MAX; + + dev->last_residency = (int) diff; + + return index; +} + #ifdef CONFIG_ARCH_HAS_CPU_RELAX static int poll_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -197,6 +273,7 @@ static void poll_idle_init(struct cpuidle_driver *drv) state->power_usage = -1; state->flags = 0; state->enter = poll_idle; + state->disable = 0; } #else static void poll_idle_init(struct cpuidle_driver *drv) {} @@ -212,13 +289,14 @@ static void poll_idle_init(struct cpuidle_driver *drv) {} int cpuidle_enable_device(struct cpuidle_device *dev) { int ret, i; + struct cpuidle_driver *drv = cpuidle_get_driver(); if (dev->enabled) return 0; - if (!cpuidle_get_driver() || !cpuidle_curr_governor) + if (!drv || !cpuidle_curr_governor) return -EIO; if (!dev->state_count) - return -EINVAL; + dev->state_count = drv->state_count; if (dev->registered == 0) { ret = __cpuidle_register_device(dev); @@ -226,13 +304,16 @@ int cpuidle_enable_device(struct cpuidle_device *dev) return ret; } - poll_idle_init(cpuidle_get_driver()); + cpuidle_enter_ops = drv->en_core_tk_irqen ? + cpuidle_enter_tk : cpuidle_enter; + + poll_idle_init(drv); if ((ret = cpuidle_add_state_sysfs(dev))) return ret; if (cpuidle_curr_governor->enable && - (ret = cpuidle_curr_governor->enable(cpuidle_get_driver(), dev))) + (ret = cpuidle_curr_governor->enable(drv, dev))) goto fail_sysfs; for (i = 0; i < dev->state_count; i++) { diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 284d7af..40cd3f3 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -47,7 +47,7 @@ static void __cpuidle_register_driver(struct cpuidle_driver *drv) */ int cpuidle_register_driver(struct cpuidle_driver *drv) { - if (!drv) + if (!drv || !drv->state_count) return -EINVAL; if (cpuidle_disabled()) diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index ad09526..0633575 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -236,7 +236,7 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY); - unsigned int power_usage = -1; + int power_usage = -1; int i; int multiplier; struct timespec t; @@ -280,7 +280,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) * We want to default to C1 (hlt), not to busy polling * unless the timer is happening really really soon. */ - if (data->expected_us > 5) + if (data->expected_us > 5 && + drv->states[CPUIDLE_DRIVER_STATE_START].disable == 0) data->last_state_idx = CPUIDLE_DRIVER_STATE_START; /* @@ -290,6 +291,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { struct cpuidle_state *s = &drv->states[i]; + if (s->disable) + continue; if (s->target_residency > data->predicted_us) continue; if (s->exit_latency > latency_req) diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 3fe41fe..88032b4 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -11,6 +11,7 @@ #include <linux/sysfs.h> #include <linux/slab.h> #include <linux/cpu.h> +#include <linux/capability.h> #include "cpuidle.h" @@ -222,6 +223,9 @@ struct cpuidle_state_attr { #define define_one_state_ro(_name, show) \ static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0444, show, NULL) +#define define_one_state_rw(_name, show, store) \ +static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0644, show, store) + #define define_show_state_function(_name) \ static ssize_t show_state_##_name(struct cpuidle_state *state, \ struct cpuidle_state_usage *state_usage, char *buf) \ @@ -229,6 +233,24 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, \ return sprintf(buf, "%u\n", state->_name);\ } +#define define_store_state_function(_name) \ +static ssize_t store_state_##_name(struct cpuidle_state *state, \ + const char *buf, size_t size) \ +{ \ + long value; \ + int err; \ + if (!capable(CAP_SYS_ADMIN)) \ + return -EPERM; \ + err = kstrtol(buf, 0, &value); \ + if (err) \ + return err; \ + if (value) \ + state->disable = 1; \ + else \ + state->disable = 0; \ + return size; \ +} + #define define_show_state_ull_function(_name) \ static ssize_t show_state_##_name(struct cpuidle_state *state, \ struct cpuidle_state_usage *state_usage, char *buf) \ @@ -251,6 +273,8 @@ define_show_state_ull_function(usage) define_show_state_ull_function(time) define_show_state_str_function(name) define_show_state_str_function(desc) +define_show_state_function(disable) +define_store_state_function(disable) define_one_state_ro(name, show_state_name); define_one_state_ro(desc, show_state_desc); @@ -258,6 +282,7 @@ define_one_state_ro(latency, show_state_exit_latency); define_one_state_ro(power, show_state_power_usage); define_one_state_ro(usage, show_state_usage); define_one_state_ro(time, show_state_time); +define_one_state_rw(disable, show_state_disable, store_state_disable); static struct attribute *cpuidle_state_default_attrs[] = { &attr_name.attr, @@ -266,6 +291,7 @@ static struct attribute *cpuidle_state_default_attrs[] = { &attr_power.attr, &attr_usage.attr, &attr_time.attr, + &attr_disable.attr, NULL }; @@ -287,8 +313,22 @@ static ssize_t cpuidle_state_show(struct kobject * kobj, return ret; } +static ssize_t cpuidle_state_store(struct kobject *kobj, + struct attribute *attr, const char *buf, size_t size) +{ + int ret = -EIO; + struct cpuidle_state *state = kobj_to_state(kobj); + struct cpuidle_state_attr *cattr = attr_to_stateattr(attr); + + if (cattr->store) + ret = cattr->store(state, buf, size); + + return ret; +} + static const struct sysfs_ops cpuidle_state_sysfs_ops = { .show = cpuidle_state_show, + .store = cpuidle_state_store, }; static void cpuidle_state_sysfs_release(struct kobject *kobj) diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index f1a2749..cf9da36 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -201,7 +201,6 @@ config PL330_DMA tristate "DMA API Driver for PL330" select DMA_ENGINE depends on ARM_AMBA - select PL330 help Select if your platform has one or more PL330 DMACs. You need to provide platform specific settings via @@ -231,7 +230,7 @@ config IMX_SDMA config IMX_DMA tristate "i.MX DMA support" - depends on IMX_HAVE_DMA_V1 + depends on ARCH_MXC select DMA_ENGINE help Support the i.MX DMA engine. This engine is integrated into @@ -252,6 +251,15 @@ config EP93XX_DMA help Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. +config DMA_SA11X0 + tristate "SA-11x0 DMA support" + depends on ARCH_SA1100 + select DMA_ENGINE + help + Support the DMA engine found on Intel StrongARM SA-1100 and + SA-1110 SoCs. This DMA engine can only be used with on-chip + devices. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 009a222..86b795b 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -27,3 +27,4 @@ obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o +obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 8a28158..c301a8e 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -85,6 +85,8 @@ #include <linux/slab.h> #include <asm/hardware/pl080.h> +#include "dmaengine.h" + #define DRIVER_NAME "pl08xdmac" static struct amba_driver pl08x_amba_driver; @@ -649,7 +651,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } if ((bd.srcbus.addr % bd.srcbus.buswidth) || - (bd.srcbus.addr % bd.srcbus.buswidth)) { + (bd.dstbus.addr % bd.dstbus.buswidth)) { dev_err(&pl08x->adev->dev, "%s src & dst address must be aligned to src" " & dst width if peripheral is flow controller", @@ -919,13 +921,10 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); struct pl08x_txd *txd = to_pl08x_txd(tx); unsigned long flags; + dma_cookie_t cookie; spin_lock_irqsave(&plchan->lock, flags); - - plchan->chan.cookie += 1; - if (plchan->chan.cookie < 0) - plchan->chan.cookie = 1; - tx->cookie = plchan->chan.cookie; + cookie = dma_cookie_assign(tx); /* Put this onto the pending list */ list_add_tail(&txd->node, &plchan->pend_list); @@ -945,7 +944,7 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) spin_unlock_irqrestore(&plchan->lock, flags); - return tx->cookie; + return cookie; } static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( @@ -965,31 +964,17 @@ static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; enum dma_status ret; - u32 bytesleft = 0; - last_used = plchan->chan.cookie; - last_complete = plchan->lc; - - ret = dma_async_is_complete(cookie, last_complete, last_used); - if (ret == DMA_SUCCESS) { - dma_set_tx_state(txstate, last_complete, last_used, 0); + ret = dma_cookie_status(chan, cookie, txstate); + if (ret == DMA_SUCCESS) return ret; - } /* * This cookie not complete yet + * Get number of bytes left in the active transactions and queue */ - last_used = plchan->chan.cookie; - last_complete = plchan->lc; - - /* Get number of bytes left in the active transactions and queue */ - bytesleft = pl08x_getbytes_chan(plchan); - - dma_set_tx_state(txstate, last_complete, last_used, - bytesleft); + dma_set_residue(txstate, pl08x_getbytes_chan(plchan)); if (plchan->state == PL08X_CHAN_PAUSED) return DMA_PAUSED; @@ -1139,6 +1124,8 @@ static int dma_set_runtime_config(struct dma_chan *chan, cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT; cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT; + plchan->device_fc = config->device_fc; + if (plchan->runtime_direction == DMA_DEV_TO_MEM) { plchan->src_addr = config->src_addr; plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR | @@ -1326,7 +1313,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; @@ -1370,7 +1357,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } - if (plchan->cd->device_fc) + if (plchan->device_fc) tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER : PL080_FLOW_PER2MEM_PER; else @@ -1541,7 +1528,7 @@ static void pl08x_tasklet(unsigned long data) if (txd) { /* Update last completed */ - plchan->lc = txd->tx.cookie; + dma_cookie_complete(&txd->tx); } /* If a new descriptor is queued, set it up plchan->at is NULL here */ @@ -1722,8 +1709,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->name); chan->chan.device = dmadev; - chan->chan.cookie = 0; - chan->lc = 0; + dma_cookie_init(&chan->chan); spin_lock_init(&chan->lock); INIT_LIST_HEAD(&chan->pend_list); diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index f4aed5f..7aa58d2 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -27,6 +27,7 @@ #include <linux/of_device.h> #include "at_hdmac_regs.h" +#include "dmaengine.h" /* * Glossary @@ -192,27 +193,6 @@ static void atc_desc_chain(struct at_desc **first, struct at_desc **prev, } /** - * atc_assign_cookie - compute and assign new cookie - * @atchan: channel we work on - * @desc: descriptor to assign cookie for - * - * Called with atchan->lock held and bh disabled - */ -static dma_cookie_t -atc_assign_cookie(struct at_dma_chan *atchan, struct at_desc *desc) -{ - dma_cookie_t cookie = atchan->chan_common.cookie; - - if (++cookie < 0) - cookie = 1; - - atchan->chan_common.cookie = cookie; - desc->txd.cookie = cookie; - - return cookie; -} - -/** * atc_dostart - starts the DMA engine for real * @atchan: the channel we want to start * @first: first descriptor in the list we want to begin with @@ -269,7 +249,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) dev_vdbg(chan2dev(&atchan->chan_common), "descriptor %u complete\n", txd->cookie); - atchan->completed_cookie = txd->cookie; + dma_cookie_complete(txd); /* move children to free_list */ list_splice_init(&desc->tx_list, &atchan->free_list); @@ -547,7 +527,7 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx) unsigned long flags; spin_lock_irqsave(&atchan->lock, flags); - cookie = atc_assign_cookie(atchan, desc); + cookie = dma_cookie_assign(tx); if (list_empty(&atchan->active_list)) { dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n", @@ -659,14 +639,16 @@ err_desc_get: * @sg_len: number of entries in @scatterlist * @direction: DMA direction * @flags: tx descriptor status flags + * @context: transaction context (ignored) */ static struct dma_async_tx_descriptor * atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma_slave *atslave = chan->private; + struct dma_slave_config *sconfig = &atchan->dma_sconfig; struct at_desc *first = NULL; struct at_desc *prev = NULL; u32 ctrla; @@ -688,19 +670,18 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, return NULL; } - reg_width = atslave->reg_width; - ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla; ctrlb = ATC_IEN; switch (direction) { case DMA_MEM_TO_DEV: + reg_width = convert_buswidth(sconfig->dst_addr_width); ctrla |= ATC_DST_WIDTH(reg_width); ctrlb |= ATC_DST_ADDR_MODE_FIXED | ATC_SRC_ADDR_MODE_INCR | ATC_FC_MEM2PER | ATC_SIF(AT_DMA_MEM_IF) | ATC_DIF(AT_DMA_PER_IF); - reg = atslave->tx_reg; + reg = sconfig->dst_addr; for_each_sg(sgl, sg, sg_len, i) { struct at_desc *desc; u32 len; @@ -728,13 +709,14 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, } break; case DMA_DEV_TO_MEM: + reg_width = convert_buswidth(sconfig->src_addr_width); ctrla |= ATC_SRC_WIDTH(reg_width); ctrlb |= ATC_DST_ADDR_MODE_INCR | ATC_SRC_ADDR_MODE_FIXED | ATC_FC_PER2MEM | ATC_SIF(AT_DMA_PER_IF) | ATC_DIF(AT_DMA_MEM_IF); - reg = atslave->rx_reg; + reg = sconfig->src_addr; for_each_sg(sgl, sg, sg_len, i) { struct at_desc *desc; u32 len; @@ -810,12 +792,15 @@ err_out: * atc_dma_cyclic_fill_desc - Fill one period decriptor */ static int -atc_dma_cyclic_fill_desc(struct at_dma_slave *atslave, struct at_desc *desc, +atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc, unsigned int period_index, dma_addr_t buf_addr, - size_t period_len, enum dma_transfer_direction direction) + unsigned int reg_width, size_t period_len, + enum dma_transfer_direction direction) { - u32 ctrla; - unsigned int reg_width = atslave->reg_width; + struct at_dma_chan *atchan = to_at_dma_chan(chan); + struct at_dma_slave *atslave = chan->private; + struct dma_slave_config *sconfig = &atchan->dma_sconfig; + u32 ctrla; /* prepare common CRTLA value */ ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla @@ -826,7 +811,7 @@ atc_dma_cyclic_fill_desc(struct at_dma_slave *atslave, struct at_desc *desc, switch (direction) { case DMA_MEM_TO_DEV: desc->lli.saddr = buf_addr + (period_len * period_index); - desc->lli.daddr = atslave->tx_reg; + desc->lli.daddr = sconfig->dst_addr; desc->lli.ctrla = ctrla; desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED | ATC_SRC_ADDR_MODE_INCR @@ -836,7 +821,7 @@ atc_dma_cyclic_fill_desc(struct at_dma_slave *atslave, struct at_desc *desc, break; case DMA_DEV_TO_MEM: - desc->lli.saddr = atslave->rx_reg; + desc->lli.saddr = sconfig->src_addr; desc->lli.daddr = buf_addr + (period_len * period_index); desc->lli.ctrla = ctrla; desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR @@ -860,16 +845,20 @@ atc_dma_cyclic_fill_desc(struct at_dma_slave *atslave, struct at_desc *desc, * @buf_len: total number of bytes for the entire buffer * @period_len: number of bytes for each period * @direction: transfer direction, to or from device + * @context: transfer context (ignored) */ static struct dma_async_tx_descriptor * atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma_slave *atslave = chan->private; + struct dma_slave_config *sconfig = &atchan->dma_sconfig; struct at_desc *first = NULL; struct at_desc *prev = NULL; unsigned long was_cyclic; + unsigned int reg_width; unsigned int periods = buf_len / period_len; unsigned int i; @@ -889,8 +878,13 @@ atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, return NULL; } + if (sconfig->direction == DMA_MEM_TO_DEV) + reg_width = convert_buswidth(sconfig->dst_addr_width); + else + reg_width = convert_buswidth(sconfig->src_addr_width); + /* Check for too big/unaligned periods and unaligned DMA buffer */ - if (atc_dma_cyclic_check_values(atslave->reg_width, buf_addr, + if (atc_dma_cyclic_check_values(reg_width, buf_addr, period_len, direction)) goto err_out; @@ -902,8 +896,8 @@ atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, if (!desc) goto err_desc_get; - if (atc_dma_cyclic_fill_desc(atslave, desc, i, buf_addr, - period_len, direction)) + if (atc_dma_cyclic_fill_desc(chan, desc, i, buf_addr, + reg_width, period_len, direction)) goto err_desc_get; atc_desc_chain(&first, &prev, desc); @@ -926,6 +920,23 @@ err_out: return NULL; } +static int set_runtime_config(struct dma_chan *chan, + struct dma_slave_config *sconfig) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + /* Check if it is chan is configured for slave transfers */ + if (!chan->private) + return -EINVAL; + + memcpy(&atchan->dma_sconfig, sconfig, sizeof(*sconfig)); + + convert_burst(&atchan->dma_sconfig.src_maxburst); + convert_burst(&atchan->dma_sconfig.dst_maxburst); + + return 0; +} + static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) @@ -986,6 +997,8 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, clear_bit(ATC_IS_CYCLIC, &atchan->status); spin_unlock_irqrestore(&atchan->lock, flags); + } else if (cmd == DMA_SLAVE_CONFIG) { + return set_runtime_config(chan, (struct dma_slave_config *)arg); } else { return -ENXIO; } @@ -1016,26 +1029,20 @@ atc_tx_status(struct dma_chan *chan, spin_lock_irqsave(&atchan->lock, flags); - last_complete = atchan->completed_cookie; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); if (ret != DMA_SUCCESS) { atc_cleanup_descriptors(atchan); - last_complete = atchan->completed_cookie; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); } + last_complete = chan->completed_cookie; + last_used = chan->cookie; + spin_unlock_irqrestore(&atchan->lock, flags); if (ret != DMA_SUCCESS) - dma_set_tx_state(txstate, last_complete, last_used, - atc_first_active(atchan)->len); - else - dma_set_tx_state(txstate, last_complete, last_used, 0); + dma_set_residue(txstate, atc_first_active(atchan)->len); if (atc_chan_is_paused(atchan)) ret = DMA_PAUSED; @@ -1129,7 +1136,7 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) spin_lock_irqsave(&atchan->lock, flags); atchan->descs_allocated = i; list_splice(&tmp_list, &atchan->free_list); - atchan->completed_cookie = chan->cookie = 1; + dma_cookie_init(chan); spin_unlock_irqrestore(&atchan->lock, flags); /* channel parameters */ @@ -1329,7 +1336,7 @@ static int __init at_dma_probe(struct platform_device *pdev) struct at_dma_chan *atchan = &atdma->chan[i]; atchan->chan_common.device = &atdma->dma_common; - atchan->chan_common.cookie = atchan->completed_cookie = 1; + dma_cookie_init(&atchan->chan_common); list_add_tail(&atchan->chan_common.device_node, &atdma->dma_common.channels); diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index a8d3277..897a8bc 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -207,8 +207,8 @@ enum atc_status { * @save_cfg: configuration register that is saved on suspend/resume cycle * @save_dscr: for cyclic operations, preserve next descriptor address in * the cyclic list on suspend/resume cycle + * @dma_sconfig: configuration for slave transfers, passed via DMA_SLAVE_CONFIG * @lock: serializes enqueue/dequeue operations to descriptors lists - * @completed_cookie: identifier for the most recently completed operation * @active_list: list of descriptors dmaengine is being running on * @queue: list of descriptors ready to be submitted to engine * @free_list: list of descriptors usable by the channel @@ -223,11 +223,11 @@ struct at_dma_chan { struct tasklet_struct tasklet; u32 save_cfg; u32 save_dscr; + struct dma_slave_config dma_sconfig; spinlock_t lock; /* these other elements are all protected by lock */ - dma_cookie_t completed_cookie; struct list_head active_list; struct list_head queue; struct list_head free_list; @@ -245,6 +245,36 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan) return container_of(dchan, struct at_dma_chan, chan_common); } +/* + * Fix sconfig's burst size according to at_hdmac. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3, 32 -> 4, 64 -> 5, 128 -> 6, 256 -> 7. + * + * This can be done by finding most significant bit set. + */ +static inline void convert_burst(u32 *maxburst) +{ + if (*maxburst > 1) + *maxburst = fls(*maxburst) - 2; + else + *maxburst = 0; +} + +/* + * Fix sconfig's bus width according to at_hdmac. + * 1 byte -> 0, 2 bytes -> 1, 4 bytes -> 2. + */ +static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width) +{ + switch (addr_width) { + case DMA_SLAVE_BUSWIDTH_2_BYTES: + return 1; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + return 2; + default: + /* For 1 byte width or fallback */ + return 0; + } +} /*-- Controller ------------------------------------------------------*/ diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index d65a718..dc89455 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -24,6 +24,7 @@ #include <mach/coh901318.h> #include "coh901318_lli.h" +#include "dmaengine.h" #define COHC_2_DEV(cohc) (&cohc->chan.dev->device) @@ -59,7 +60,6 @@ struct coh901318_base { struct coh901318_chan { spinlock_t lock; int allocated; - int completed; int id; int stopped; @@ -318,20 +318,6 @@ static int coh901318_prep_linked_list(struct coh901318_chan *cohc, return 0; } -static dma_cookie_t -coh901318_assign_cookie(struct coh901318_chan *cohc, - struct coh901318_desc *cohd) -{ - dma_cookie_t cookie = cohc->chan.cookie; - - if (++cookie < 0) - cookie = 1; - - cohc->chan.cookie = cookie; - cohd->desc.cookie = cookie; - - return cookie; -} static struct coh901318_desc * coh901318_desc_get(struct coh901318_chan *cohc) @@ -705,7 +691,7 @@ static void dma_tasklet(unsigned long data) callback_param = cohd_fin->desc.callback_param; /* sign this job as completed on the channel */ - cohc->completed = cohd_fin->desc.cookie; + dma_cookie_complete(&cohd_fin->desc); /* release the lli allocation and remove the descriptor */ coh901318_lli_free(&cohc->base->pool, &cohd_fin->lli); @@ -929,7 +915,7 @@ static int coh901318_alloc_chan_resources(struct dma_chan *chan) coh901318_config(cohc, NULL); cohc->allocated = 1; - cohc->completed = chan->cookie = 1; + dma_cookie_init(chan); spin_unlock_irqrestore(&cohc->lock, flags); @@ -966,16 +952,16 @@ coh901318_tx_submit(struct dma_async_tx_descriptor *tx) desc); struct coh901318_chan *cohc = to_coh901318_chan(tx->chan); unsigned long flags; + dma_cookie_t cookie; spin_lock_irqsave(&cohc->lock, flags); - - tx->cookie = coh901318_assign_cookie(cohc, cohd); + cookie = dma_cookie_assign(tx); coh901318_desc_queue(cohc, cohd); spin_unlock_irqrestore(&cohc->lock, flags); - return tx->cookie; + return cookie; } static struct dma_async_tx_descriptor * @@ -1035,7 +1021,7 @@ coh901318_prep_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, static struct dma_async_tx_descriptor * coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct coh901318_chan *cohc = to_coh901318_chan(chan); struct coh901318_lli *lli; @@ -1165,17 +1151,12 @@ coh901318_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct coh901318_chan *cohc = to_coh901318_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; - int ret; - - last_complete = cohc->completed; - last_used = chan->cookie; + enum dma_status ret; - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); + /* FIXME: should be conditional on ret != DMA_SUCCESS? */ + dma_set_residue(txstate, coh901318_get_bytes_left(chan)); - dma_set_tx_state(txstate, last_complete, last_used, - coh901318_get_bytes_left(chan)); if (ret == DMA_IN_PROGRESS && cohc->stopped) ret = DMA_PAUSED; diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index a6c6051..767bcc3 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -510,8 +510,8 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v dma_chan_name(chan)); list_del_rcu(&device->global_node); } else if (err) - pr_debug("dmaengine: failed to get %s: (%d)\n", - dma_chan_name(chan), err); + pr_debug("%s: failed to get %s: (%d)\n", + __func__, dma_chan_name(chan), err); else break; if (--device->privatecnt == 0) @@ -564,8 +564,8 @@ void dmaengine_get(void) list_del_rcu(&device->global_node); break; } else if (err) - pr_err("dmaengine: failed to get %s: (%d)\n", - dma_chan_name(chan), err); + pr_err("%s: failed to get %s: (%d)\n", + __func__, dma_chan_name(chan), err); } } diff --git a/drivers/dma/dmaengine.h b/drivers/dma/dmaengine.h new file mode 100644 index 0000000..17f983a --- /dev/null +++ b/drivers/dma/dmaengine.h @@ -0,0 +1,89 @@ +/* + * The contents of this file are private to DMA engine drivers, and is not + * part of the API to be used by DMA engine users. + */ +#ifndef DMAENGINE_H +#define DMAENGINE_H + +#include <linux/bug.h> +#include <linux/dmaengine.h> + +/** + * dma_cookie_init - initialize the cookies for a DMA channel + * @chan: dma channel to initialize + */ +static inline void dma_cookie_init(struct dma_chan *chan) +{ + chan->cookie = DMA_MIN_COOKIE; + chan->completed_cookie = DMA_MIN_COOKIE; +} + +/** + * dma_cookie_assign - assign a DMA engine cookie to the descriptor + * @tx: descriptor needing cookie + * + * Assign a unique non-zero per-channel cookie to the descriptor. + * Note: caller is expected to hold a lock to prevent concurrency. + */ +static inline dma_cookie_t dma_cookie_assign(struct dma_async_tx_descriptor *tx) +{ + struct dma_chan *chan = tx->chan; + dma_cookie_t cookie; + + cookie = chan->cookie + 1; + if (cookie < DMA_MIN_COOKIE) + cookie = DMA_MIN_COOKIE; + tx->cookie = chan->cookie = cookie; + + return cookie; +} + +/** + * dma_cookie_complete - complete a descriptor + * @tx: descriptor to complete + * + * Mark this descriptor complete by updating the channels completed + * cookie marker. Zero the descriptors cookie to prevent accidental + * repeated completions. + * + * Note: caller is expected to hold a lock to prevent concurrency. + */ +static inline void dma_cookie_complete(struct dma_async_tx_descriptor *tx) +{ + BUG_ON(tx->cookie < DMA_MIN_COOKIE); + tx->chan->completed_cookie = tx->cookie; + tx->cookie = 0; +} + +/** + * dma_cookie_status - report cookie status + * @chan: dma channel + * @cookie: cookie we are interested in + * @state: dma_tx_state structure to return last/used cookies + * + * Report the status of the cookie, filling in the state structure if + * non-NULL. No locking is required. + */ +static inline enum dma_status dma_cookie_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *state) +{ + dma_cookie_t used, complete; + + used = chan->cookie; + complete = chan->completed_cookie; + barrier(); + if (state) { + state->last = complete; + state->used = used; + state->residue = 0; + } + return dma_async_is_complete(cookie, complete, used); +} + +static inline void dma_set_residue(struct dma_tx_state *state, u32 residue) +{ + if (state) + state->residue = residue; +} + +#endif diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 9b592b0..7439079 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -9,6 +9,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/bitops.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/dmaengine.h> @@ -22,6 +23,7 @@ #include <linux/slab.h> #include "dw_dmac_regs.h" +#include "dmaengine.h" /* * This supports the Synopsys "DesignWare AHB Central DMA Controller", @@ -33,19 +35,23 @@ * which does not support descriptor writeback. */ -#define DWC_DEFAULT_CTLLO(private) ({ \ - struct dw_dma_slave *__slave = (private); \ - int dms = __slave ? __slave->dst_master : 0; \ - int sms = __slave ? __slave->src_master : 1; \ - u8 smsize = __slave ? __slave->src_msize : DW_DMA_MSIZE_16; \ - u8 dmsize = __slave ? __slave->dst_msize : DW_DMA_MSIZE_16; \ +#define DWC_DEFAULT_CTLLO(_chan) ({ \ + struct dw_dma_slave *__slave = (_chan->private); \ + struct dw_dma_chan *_dwc = to_dw_dma_chan(_chan); \ + struct dma_slave_config *_sconfig = &_dwc->dma_sconfig; \ + int _dms = __slave ? __slave->dst_master : 0; \ + int _sms = __slave ? __slave->src_master : 1; \ + u8 _smsize = __slave ? _sconfig->src_maxburst : \ + DW_DMA_MSIZE_16; \ + u8 _dmsize = __slave ? _sconfig->dst_maxburst : \ + DW_DMA_MSIZE_16; \ \ - (DWC_CTLL_DST_MSIZE(dmsize) \ - | DWC_CTLL_SRC_MSIZE(smsize) \ + (DWC_CTLL_DST_MSIZE(_dmsize) \ + | DWC_CTLL_SRC_MSIZE(_smsize) \ | DWC_CTLL_LLP_D_EN \ | DWC_CTLL_LLP_S_EN \ - | DWC_CTLL_DMS(dms) \ - | DWC_CTLL_SMS(sms)); \ + | DWC_CTLL_DMS(_dms) \ + | DWC_CTLL_SMS(_sms)); \ }) /* @@ -151,21 +157,6 @@ static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc) } } -/* Called with dwc->lock held and bh disabled */ -static dma_cookie_t -dwc_assign_cookie(struct dw_dma_chan *dwc, struct dw_desc *desc) -{ - dma_cookie_t cookie = dwc->chan.cookie; - - if (++cookie < 0) - cookie = 1; - - dwc->chan.cookie = cookie; - desc->txd.cookie = cookie; - - return cookie; -} - static void dwc_initialize(struct dw_dma_chan *dwc) { struct dw_dma *dw = to_dw_dma(dwc->chan.device); @@ -192,7 +183,6 @@ static void dwc_initialize(struct dw_dma_chan *dwc) /* Enable interrupts */ channel_set_bit(dw, MASK.XFER, dwc->mask); - channel_set_bit(dw, MASK.BLOCK, dwc->mask); channel_set_bit(dw, MASK.ERROR, dwc->mask); dwc->initialized = true; @@ -245,7 +235,7 @@ dwc_descriptor_complete(struct dw_dma_chan *dwc, struct dw_desc *desc, dev_vdbg(chan2dev(&dwc->chan), "descriptor %u complete\n", txd->cookie); spin_lock_irqsave(&dwc->lock, flags); - dwc->completed = txd->cookie; + dma_cookie_complete(txd); if (callback_required) { callback = txd->callback; param = txd->callback_param; @@ -329,12 +319,6 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); - /* - * Clear block interrupt flag before scanning so that we don't - * miss any, and read LLP before RAW_XFER to ensure it is - * valid if we decide to scan the list. - */ - dma_writel(dw, CLEAR.BLOCK, dwc->mask); llp = channel_readl(dwc, LLP); status_xfer = dma_readl(dw, RAW.XFER); @@ -470,17 +454,16 @@ EXPORT_SYMBOL(dw_dma_get_dst_addr); /* called with dwc->lock held and all DMAC interrupts disabled */ static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, - u32 status_block, u32 status_err, u32 status_xfer) + u32 status_err, u32 status_xfer) { unsigned long flags; - if (status_block & dwc->mask) { + if (dwc->mask) { void (*callback)(void *param); void *callback_param; dev_vdbg(chan2dev(&dwc->chan), "new cyclic period llp 0x%08x\n", channel_readl(dwc, LLP)); - dma_writel(dw, CLEAR.BLOCK, dwc->mask); callback = dwc->cdesc->period_callback; callback_param = dwc->cdesc->period_callback_param; @@ -520,7 +503,6 @@ static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, channel_writel(dwc, CTL_LO, 0); channel_writel(dwc, CTL_HI, 0); - dma_writel(dw, CLEAR.BLOCK, dwc->mask); dma_writel(dw, CLEAR.ERROR, dwc->mask); dma_writel(dw, CLEAR.XFER, dwc->mask); @@ -537,36 +519,29 @@ static void dw_dma_tasklet(unsigned long data) { struct dw_dma *dw = (struct dw_dma *)data; struct dw_dma_chan *dwc; - u32 status_block; u32 status_xfer; u32 status_err; int i; - status_block = dma_readl(dw, RAW.BLOCK); status_xfer = dma_readl(dw, RAW.XFER); status_err = dma_readl(dw, RAW.ERROR); - dev_vdbg(dw->dma.dev, "tasklet: status_block=%x status_err=%x\n", - status_block, status_err); + dev_vdbg(dw->dma.dev, "tasklet: status_err=%x\n", status_err); for (i = 0; i < dw->dma.chancnt; i++) { dwc = &dw->chan[i]; if (test_bit(DW_DMA_IS_CYCLIC, &dwc->flags)) - dwc_handle_cyclic(dw, dwc, status_block, status_err, - status_xfer); + dwc_handle_cyclic(dw, dwc, status_err, status_xfer); else if (status_err & (1 << i)) dwc_handle_error(dw, dwc); - else if ((status_block | status_xfer) & (1 << i)) + else if (status_xfer & (1 << i)) dwc_scan_descriptors(dw, dwc); } /* - * Re-enable interrupts. Block Complete interrupts are only - * enabled if the INT_EN bit in the descriptor is set. This - * will trigger a scan before the whole list is done. + * Re-enable interrupts. */ channel_set_bit(dw, MASK.XFER, dw->all_chan_mask); - channel_set_bit(dw, MASK.BLOCK, dw->all_chan_mask); channel_set_bit(dw, MASK.ERROR, dw->all_chan_mask); } @@ -583,7 +558,6 @@ static irqreturn_t dw_dma_interrupt(int irq, void *dev_id) * softirq handler. */ channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask); - channel_clear_bit(dw, MASK.BLOCK, dw->all_chan_mask); channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask); status = dma_readl(dw, STATUS_INT); @@ -594,7 +568,6 @@ static irqreturn_t dw_dma_interrupt(int irq, void *dev_id) /* Try to recover */ channel_clear_bit(dw, MASK.XFER, (1 << 8) - 1); - channel_clear_bit(dw, MASK.BLOCK, (1 << 8) - 1); channel_clear_bit(dw, MASK.SRC_TRAN, (1 << 8) - 1); channel_clear_bit(dw, MASK.DST_TRAN, (1 << 8) - 1); channel_clear_bit(dw, MASK.ERROR, (1 << 8) - 1); @@ -615,7 +588,7 @@ static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx) unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); - cookie = dwc_assign_cookie(dwc, desc); + cookie = dma_cookie_assign(tx); /* * REVISIT: We should attempt to chain as many descriptors as @@ -674,7 +647,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, else src_width = dst_width = 0; - ctllo = DWC_DEFAULT_CTLLO(chan->private) + ctllo = DWC_DEFAULT_CTLLO(chan) | DWC_CTLL_DST_WIDTH(dst_width) | DWC_CTLL_SRC_WIDTH(src_width) | DWC_CTLL_DST_INC @@ -731,10 +704,11 @@ err_desc_get: static struct dma_async_tx_descriptor * dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); struct dw_dma_slave *dws = chan->private; + struct dma_slave_config *sconfig = &dwc->dma_sconfig; struct dw_desc *prev; struct dw_desc *first; u32 ctllo; @@ -750,25 +724,34 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (unlikely(!dws || !sg_len)) return NULL; - reg_width = dws->reg_width; prev = first = NULL; switch (direction) { case DMA_MEM_TO_DEV: - ctllo = (DWC_DEFAULT_CTLLO(chan->private) + reg_width = __fls(sconfig->dst_addr_width); + reg = sconfig->dst_addr; + ctllo = (DWC_DEFAULT_CTLLO(chan) | DWC_CTLL_DST_WIDTH(reg_width) | DWC_CTLL_DST_FIX - | DWC_CTLL_SRC_INC - | DWC_CTLL_FC(dws->fc)); - reg = dws->tx_reg; + | DWC_CTLL_SRC_INC); + + ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_M2P) : + DWC_CTLL_FC(DW_DMA_FC_D_M2P); + for_each_sg(sgl, sg, sg_len, i) { struct dw_desc *desc; u32 len, dlen, mem; mem = sg_phys(sg); len = sg_dma_len(sg); - mem_width = 2; - if (unlikely(mem & 3 || len & 3)) + + if (!((mem | len) & 7)) + mem_width = 3; + else if (!((mem | len) & 3)) + mem_width = 2; + else if (!((mem | len) & 1)) + mem_width = 1; + else mem_width = 0; slave_sg_todev_fill_desc: @@ -812,21 +795,30 @@ slave_sg_todev_fill_desc: } break; case DMA_DEV_TO_MEM: - ctllo = (DWC_DEFAULT_CTLLO(chan->private) + reg_width = __fls(sconfig->src_addr_width); + reg = sconfig->src_addr; + ctllo = (DWC_DEFAULT_CTLLO(chan) | DWC_CTLL_SRC_WIDTH(reg_width) | DWC_CTLL_DST_INC - | DWC_CTLL_SRC_FIX - | DWC_CTLL_FC(dws->fc)); + | DWC_CTLL_SRC_FIX); + + ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_P2M) : + DWC_CTLL_FC(DW_DMA_FC_D_P2M); - reg = dws->rx_reg; for_each_sg(sgl, sg, sg_len, i) { struct dw_desc *desc; u32 len, dlen, mem; mem = sg_phys(sg); len = sg_dma_len(sg); - mem_width = 2; - if (unlikely(mem & 3 || len & 3)) + + if (!((mem | len) & 7)) + mem_width = 3; + else if (!((mem | len) & 3)) + mem_width = 2; + else if (!((mem | len) & 1)) + mem_width = 1; + else mem_width = 0; slave_sg_fromdev_fill_desc: @@ -890,6 +882,39 @@ err_desc_get: return NULL; } +/* + * Fix sconfig's burst size according to dw_dmac. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. + * + * NOTE: burst size 2 is not supported by controller. + * + * This can be done by finding least significant bit set: n & (n - 1) + */ +static inline void convert_burst(u32 *maxburst) +{ + if (*maxburst > 1) + *maxburst = fls(*maxburst) - 2; + else + *maxburst = 0; +} + +static int +set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig) +{ + struct dw_dma_chan *dwc = to_dw_dma_chan(chan); + + /* Check if it is chan is configured for slave transfers */ + if (!chan->private) + return -EINVAL; + + memcpy(&dwc->dma_sconfig, sconfig, sizeof(*sconfig)); + + convert_burst(&dwc->dma_sconfig.src_maxburst); + convert_burst(&dwc->dma_sconfig.dst_maxburst); + + return 0; +} + static int dwc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) { @@ -939,8 +964,11 @@ static int dwc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, /* Flush all pending and queued descriptors */ list_for_each_entry_safe(desc, _desc, &list, desc_node) dwc_descriptor_complete(dwc, desc, false); - } else + } else if (cmd == DMA_SLAVE_CONFIG) { + return set_runtime_config(chan, (struct dma_slave_config *)arg); + } else { return -ENXIO; + } return 0; } @@ -951,28 +979,17 @@ dwc_tx_status(struct dma_chan *chan, struct dma_tx_state *txstate) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; - int ret; - - last_complete = dwc->completed; - last_used = chan->cookie; + enum dma_status ret; - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); if (ret != DMA_SUCCESS) { dwc_scan_descriptors(to_dw_dma(chan->device), dwc); - last_complete = dwc->completed; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); } if (ret != DMA_SUCCESS) - dma_set_tx_state(txstate, last_complete, last_used, - dwc_first_active(dwc)->len); - else - dma_set_tx_state(txstate, last_complete, last_used, 0); + dma_set_residue(txstate, dwc_first_active(dwc)->len); if (dwc->paused) return DMA_PAUSED; @@ -1004,7 +1021,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) return -EIO; } - dwc->completed = chan->cookie = 1; + dma_cookie_init(chan); /* * NOTE: some controllers may have additional features that we @@ -1068,7 +1085,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan) /* Disable interrupts */ channel_clear_bit(dw, MASK.XFER, dwc->mask); - channel_clear_bit(dw, MASK.BLOCK, dwc->mask); channel_clear_bit(dw, MASK.ERROR, dwc->mask); spin_unlock_irqrestore(&dwc->lock, flags); @@ -1120,7 +1136,6 @@ int dw_dma_cyclic_start(struct dma_chan *chan) return -EBUSY; } - dma_writel(dw, CLEAR.BLOCK, dwc->mask); dma_writel(dw, CLEAR.ERROR, dwc->mask); dma_writel(dw, CLEAR.XFER, dwc->mask); @@ -1175,11 +1190,11 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, enum dma_transfer_direction direction) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); + struct dma_slave_config *sconfig = &dwc->dma_sconfig; struct dw_cyclic_desc *cdesc; struct dw_cyclic_desc *retval = NULL; struct dw_desc *desc; struct dw_desc *last = NULL; - struct dw_dma_slave *dws = chan->private; unsigned long was_cyclic; unsigned int reg_width; unsigned int periods; @@ -1203,7 +1218,12 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, } retval = ERR_PTR(-EINVAL); - reg_width = dws->reg_width; + + if (direction == DMA_MEM_TO_DEV) + reg_width = __ffs(sconfig->dst_addr_width); + else + reg_width = __ffs(sconfig->src_addr_width); + periods = buf_len / period_len; /* Check for too big/unaligned periods and unaligned DMA buffer. */ @@ -1236,26 +1256,34 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, switch (direction) { case DMA_MEM_TO_DEV: - desc->lli.dar = dws->tx_reg; + desc->lli.dar = sconfig->dst_addr; desc->lli.sar = buf_addr + (period_len * i); - desc->lli.ctllo = (DWC_DEFAULT_CTLLO(chan->private) + desc->lli.ctllo = (DWC_DEFAULT_CTLLO(chan) | DWC_CTLL_DST_WIDTH(reg_width) | DWC_CTLL_SRC_WIDTH(reg_width) | DWC_CTLL_DST_FIX | DWC_CTLL_SRC_INC - | DWC_CTLL_FC(dws->fc) | DWC_CTLL_INT_EN); + + desc->lli.ctllo |= sconfig->device_fc ? + DWC_CTLL_FC(DW_DMA_FC_P_M2P) : + DWC_CTLL_FC(DW_DMA_FC_D_M2P); + break; case DMA_DEV_TO_MEM: desc->lli.dar = buf_addr + (period_len * i); - desc->lli.sar = dws->rx_reg; - desc->lli.ctllo = (DWC_DEFAULT_CTLLO(chan->private) + desc->lli.sar = sconfig->src_addr; + desc->lli.ctllo = (DWC_DEFAULT_CTLLO(chan) | DWC_CTLL_SRC_WIDTH(reg_width) | DWC_CTLL_DST_WIDTH(reg_width) | DWC_CTLL_DST_INC | DWC_CTLL_SRC_FIX - | DWC_CTLL_FC(dws->fc) | DWC_CTLL_INT_EN); + + desc->lli.ctllo |= sconfig->device_fc ? + DWC_CTLL_FC(DW_DMA_FC_P_P2M) : + DWC_CTLL_FC(DW_DMA_FC_D_P2M); + break; default: break; @@ -1322,7 +1350,6 @@ void dw_dma_cyclic_free(struct dma_chan *chan) while (dma_readl(dw, CH_EN) & dwc->mask) cpu_relax(); - dma_writel(dw, CLEAR.BLOCK, dwc->mask); dma_writel(dw, CLEAR.ERROR, dwc->mask); dma_writel(dw, CLEAR.XFER, dwc->mask); @@ -1347,7 +1374,6 @@ static void dw_dma_off(struct dw_dma *dw) dma_writel(dw, CFG, 0); channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask); - channel_clear_bit(dw, MASK.BLOCK, dw->all_chan_mask); channel_clear_bit(dw, MASK.SRC_TRAN, dw->all_chan_mask); channel_clear_bit(dw, MASK.DST_TRAN, dw->all_chan_mask); channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask); @@ -1369,7 +1395,7 @@ static int __init dw_probe(struct platform_device *pdev) int err; int i; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); if (!pdata || pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS) return -EINVAL; @@ -1423,7 +1449,7 @@ static int __init dw_probe(struct platform_device *pdev) struct dw_dma_chan *dwc = &dw->chan[i]; dwc->chan.device = &dw->dma; - dwc->chan.cookie = dwc->completed = 1; + dma_cookie_init(&dwc->chan); if (pdata->chan_allocation_order == CHAN_ALLOCATION_ASCENDING) list_add_tail(&dwc->chan.device_node, &dw->dma.channels); @@ -1432,7 +1458,7 @@ static int __init dw_probe(struct platform_device *pdev) /* 7 is highest priority & 0 is lowest. */ if (pdata->chan_priority == CHAN_PRIORITY_ASCENDING) - dwc->priority = 7 - i; + dwc->priority = pdata->nr_channels - i - 1; else dwc->priority = i; @@ -1449,13 +1475,11 @@ static int __init dw_probe(struct platform_device *pdev) /* Clear/disable all interrupts on all channels. */ dma_writel(dw, CLEAR.XFER, dw->all_chan_mask); - dma_writel(dw, CLEAR.BLOCK, dw->all_chan_mask); dma_writel(dw, CLEAR.SRC_TRAN, dw->all_chan_mask); dma_writel(dw, CLEAR.DST_TRAN, dw->all_chan_mask); dma_writel(dw, CLEAR.ERROR, dw->all_chan_mask); channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask); - channel_clear_bit(dw, MASK.BLOCK, dw->all_chan_mask); channel_clear_bit(dw, MASK.SRC_TRAN, dw->all_chan_mask); channel_clear_bit(dw, MASK.DST_TRAN, dw->all_chan_mask); channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask); @@ -1562,6 +1586,10 @@ static int dw_resume_noirq(struct device *dev) static const struct dev_pm_ops dw_dev_pm_ops = { .suspend_noirq = dw_suspend_noirq, .resume_noirq = dw_resume_noirq, + .freeze_noirq = dw_suspend_noirq, + .thaw_noirq = dw_resume_noirq, + .restore_noirq = dw_resume_noirq, + .poweroff_noirq = dw_suspend_noirq, }; static struct platform_driver dw_driver = { diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 5eef694..f298f69 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -13,6 +13,18 @@ #define DW_DMA_MAX_NR_CHANNELS 8 +/* flow controller */ +enum dw_dma_fc { + DW_DMA_FC_D_M2M, + DW_DMA_FC_D_M2P, + DW_DMA_FC_D_P2M, + DW_DMA_FC_D_P2P, + DW_DMA_FC_P_P2M, + DW_DMA_FC_SP_P2P, + DW_DMA_FC_P_M2P, + DW_DMA_FC_DP_P2P, +}; + /* * Redefine this macro to handle differences between 32- and 64-bit * addressing, big vs. little endian, etc. @@ -146,13 +158,15 @@ struct dw_dma_chan { /* these other elements are all protected by lock */ unsigned long flags; - dma_cookie_t completed; struct list_head active_list; struct list_head queue; struct list_head free_list; struct dw_cyclic_desc *cdesc; unsigned int descs_allocated; + + /* configuration passed via DMA_SLAVE_CONFIG */ + struct dma_slave_config dma_sconfig; }; static inline struct dw_dma_chan_regs __iomem * diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index 59e7a96..e6f133b 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -28,6 +28,8 @@ #include <mach/dma.h> +#include "dmaengine.h" + /* M2P registers */ #define M2P_CONTROL 0x0000 #define M2P_CONTROL_STALLINT BIT(0) @@ -122,7 +124,6 @@ struct ep93xx_dma_desc { * @lock: lock protecting the fields following * @flags: flags for the channel * @buffer: which buffer to use next (0/1) - * @last_completed: last completed cookie value * @active: flattened chain of descriptors currently being processed * @queue: pending descriptors which are handled next * @free_list: list of free descriptors which can be used @@ -157,7 +158,6 @@ struct ep93xx_dma_chan { #define EP93XX_DMA_IS_CYCLIC 0 int buffer; - dma_cookie_t last_completed; struct list_head active; struct list_head queue; struct list_head free_list; @@ -703,7 +703,7 @@ static void ep93xx_dma_tasklet(unsigned long data) desc = ep93xx_dma_get_active(edmac); if (desc) { if (desc->complete) { - edmac->last_completed = desc->txd.cookie; + dma_cookie_complete(&desc->txd); list_splice_init(&edmac->active, &list); } callback = desc->txd.callback; @@ -783,17 +783,10 @@ static dma_cookie_t ep93xx_dma_tx_submit(struct dma_async_tx_descriptor *tx) unsigned long flags; spin_lock_irqsave(&edmac->lock, flags); - - cookie = edmac->chan.cookie; - - if (++cookie < 0) - cookie = 1; + cookie = dma_cookie_assign(tx); desc = container_of(tx, struct ep93xx_dma_desc, txd); - edmac->chan.cookie = cookie; - desc->txd.cookie = cookie; - /* * If nothing is currently prosessed, we push this descriptor * directly to the hardware. Otherwise we put the descriptor @@ -861,8 +854,7 @@ static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan) goto fail_clk_disable; spin_lock_irq(&edmac->lock); - edmac->last_completed = 1; - edmac->chan.cookie = 1; + dma_cookie_init(&edmac->chan); ret = edmac->edma->hw_setup(edmac); spin_unlock_irq(&edmac->lock); @@ -983,13 +975,14 @@ fail: * @sg_len: number of entries in @sgl * @dir: direction of tha DMA transfer * @flags: flags for the descriptor + * @context: operation context (ignored) * * Returns a valid DMA descriptor or %NULL in case of failure. */ static struct dma_async_tx_descriptor * ep93xx_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction dir, - unsigned long flags) + unsigned long flags, void *context) { struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); struct ep93xx_dma_desc *desc, *first; @@ -1056,6 +1049,7 @@ fail: * @buf_len: length of the buffer (in bytes) * @period_len: lenght of a single period * @dir: direction of the operation + * @context: operation context (ignored) * * Prepares a descriptor for cyclic DMA operation. This means that once the * descriptor is submitted, we will be submitting in a @period_len sized @@ -1068,7 +1062,7 @@ fail: static struct dma_async_tx_descriptor * ep93xx_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction dir) + enum dma_transfer_direction dir, void *context) { struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); struct ep93xx_dma_desc *desc, *first; @@ -1248,18 +1242,13 @@ static enum dma_status ep93xx_dma_tx_status(struct dma_chan *chan, struct dma_tx_state *state) { struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); - dma_cookie_t last_used, last_completed; enum dma_status ret; unsigned long flags; spin_lock_irqsave(&edmac->lock, flags); - last_used = chan->cookie; - last_completed = edmac->last_completed; + ret = dma_cookie_status(chan, cookie, state); spin_unlock_irqrestore(&edmac->lock, flags); - ret = dma_async_is_complete(cookie, last_completed, last_used); - dma_set_tx_state(state, last_completed, last_used, 0); - return ret; } diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index b98070c..8f84761 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -35,6 +35,7 @@ #include <linux/dmapool.h> #include <linux/of_platform.h> +#include "dmaengine.h" #include "fsldma.h" #define chan_dbg(chan, fmt, arg...) \ @@ -413,17 +414,10 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) * assign cookies to all of the software descriptors * that make up this transaction */ - cookie = chan->common.cookie; list_for_each_entry(child, &desc->tx_list, node) { - cookie++; - if (cookie < DMA_MIN_COOKIE) - cookie = DMA_MIN_COOKIE; - - child->async_tx.cookie = cookie; + cookie = dma_cookie_assign(&child->async_tx); } - chan->common.cookie = cookie; - /* put this transaction onto the tail of the pending queue */ append_ld_queue(chan, desc); @@ -765,6 +759,7 @@ fail: * @sg_len: number of entries in @scatterlist * @direction: DMA direction * @flags: DMAEngine flags + * @context: transaction context (ignored) * * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the * DMA_SLAVE API, this gets the device-specific information from the @@ -772,7 +767,8 @@ fail: */ static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg( struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, + void *context) { /* * This operation is not supported on the Freescale DMA controller @@ -984,19 +980,14 @@ static enum dma_status fsl_tx_status(struct dma_chan *dchan, struct dma_tx_state *txstate) { struct fsldma_chan *chan = to_fsl_chan(dchan); - dma_cookie_t last_complete; - dma_cookie_t last_used; + enum dma_status ret; unsigned long flags; spin_lock_irqsave(&chan->desc_lock, flags); - - last_complete = chan->completed_cookie; - last_used = dchan->cookie; - + ret = dma_cookie_status(dchan, cookie, txstate); spin_unlock_irqrestore(&chan->desc_lock, flags); - dma_set_tx_state(txstate, last_complete, last_used, 0); - return dma_async_is_complete(cookie, last_complete, last_used); + return ret; } /*----------------------------------------------------------------------------*/ @@ -1087,8 +1078,8 @@ static void dma_do_tasklet(unsigned long data) desc = to_fsl_desc(chan->ld_running.prev); cookie = desc->async_tx.cookie; + dma_cookie_complete(&desc->async_tx); - chan->completed_cookie = cookie; chan_dbg(chan, "completed_cookie=%d\n", cookie); } @@ -1303,6 +1294,7 @@ static int __devinit fsl_dma_chan_probe(struct fsldma_device *fdev, chan->idle = true; chan->common.device = &fdev->common; + dma_cookie_init(&chan->common); /* find the IRQ line, if it exists in the device tree */ chan->irq = irq_of_parse_and_map(node, 0); diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h index 9cb5aa5..f5c3879 100644 --- a/drivers/dma/fsldma.h +++ b/drivers/dma/fsldma.h @@ -137,7 +137,6 @@ struct fsldma_device { struct fsldma_chan { char name[8]; /* Channel name */ struct fsldma_chan_regs __iomem *regs; - dma_cookie_t completed_cookie; /* The maximum cookie completed */ spinlock_t desc_lock; /* Descriptor operation lock */ struct list_head ld_pending; /* Link descriptors queue */ struct list_head ld_running; /* Link descriptors queue */ diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 38586ba..a45b5d2 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -5,6 +5,7 @@ * found on i.MX1/21/27 * * Copyright 2010 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * Copyright 2012 Javier Martin, Vista Silicon <javier.martin@vista-silicon.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -22,37 +23,159 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/dmaengine.h> #include <linux/module.h> #include <asm/irq.h> -#include <mach/dma-v1.h> +#include <mach/dma.h> #include <mach/hardware.h> +#include "dmaengine.h" +#define IMXDMA_MAX_CHAN_DESCRIPTORS 16 +#define IMX_DMA_CHANNELS 16 + +#define IMX_DMA_2D_SLOTS 2 +#define IMX_DMA_2D_SLOT_A 0 +#define IMX_DMA_2D_SLOT_B 1 + +#define IMX_DMA_LENGTH_LOOP ((unsigned int)-1) +#define IMX_DMA_MEMSIZE_32 (0 << 4) +#define IMX_DMA_MEMSIZE_8 (1 << 4) +#define IMX_DMA_MEMSIZE_16 (2 << 4) +#define IMX_DMA_TYPE_LINEAR (0 << 10) +#define IMX_DMA_TYPE_2D (1 << 10) +#define IMX_DMA_TYPE_FIFO (2 << 10) + +#define IMX_DMA_ERR_BURST (1 << 0) +#define IMX_DMA_ERR_REQUEST (1 << 1) +#define IMX_DMA_ERR_TRANSFER (1 << 2) +#define IMX_DMA_ERR_BUFFER (1 << 3) +#define IMX_DMA_ERR_TIMEOUT (1 << 4) + +#define DMA_DCR 0x00 /* Control Register */ +#define DMA_DISR 0x04 /* Interrupt status Register */ +#define DMA_DIMR 0x08 /* Interrupt mask Register */ +#define DMA_DBTOSR 0x0c /* Burst timeout status Register */ +#define DMA_DRTOSR 0x10 /* Request timeout Register */ +#define DMA_DSESR 0x14 /* Transfer Error Status Register */ +#define DMA_DBOSR 0x18 /* Buffer overflow status Register */ +#define DMA_DBTOCR 0x1c /* Burst timeout control Register */ +#define DMA_WSRA 0x40 /* W-Size Register A */ +#define DMA_XSRA 0x44 /* X-Size Register A */ +#define DMA_YSRA 0x48 /* Y-Size Register A */ +#define DMA_WSRB 0x4c /* W-Size Register B */ +#define DMA_XSRB 0x50 /* X-Size Register B */ +#define DMA_YSRB 0x54 /* Y-Size Register B */ +#define DMA_SAR(x) (0x80 + ((x) << 6)) /* Source Address Registers */ +#define DMA_DAR(x) (0x84 + ((x) << 6)) /* Destination Address Registers */ +#define DMA_CNTR(x) (0x88 + ((x) << 6)) /* Count Registers */ +#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */ +#define DMA_RSSR(x) (0x90 + ((x) << 6)) /* Request source select Registers */ +#define DMA_BLR(x) (0x94 + ((x) << 6)) /* Burst length Registers */ +#define DMA_RTOR(x) (0x98 + ((x) << 6)) /* Request timeout Registers */ +#define DMA_BUCR(x) (0x98 + ((x) << 6)) /* Bus Utilization Registers */ +#define DMA_CCNR(x) (0x9C + ((x) << 6)) /* Channel counter Registers */ + +#define DCR_DRST (1<<1) +#define DCR_DEN (1<<0) +#define DBTOCR_EN (1<<15) +#define DBTOCR_CNT(x) ((x) & 0x7fff) +#define CNTR_CNT(x) ((x) & 0xffffff) +#define CCR_ACRPT (1<<14) +#define CCR_DMOD_LINEAR (0x0 << 12) +#define CCR_DMOD_2D (0x1 << 12) +#define CCR_DMOD_FIFO (0x2 << 12) +#define CCR_DMOD_EOBFIFO (0x3 << 12) +#define CCR_SMOD_LINEAR (0x0 << 10) +#define CCR_SMOD_2D (0x1 << 10) +#define CCR_SMOD_FIFO (0x2 << 10) +#define CCR_SMOD_EOBFIFO (0x3 << 10) +#define CCR_MDIR_DEC (1<<9) +#define CCR_MSEL_B (1<<8) +#define CCR_DSIZ_32 (0x0 << 6) +#define CCR_DSIZ_8 (0x1 << 6) +#define CCR_DSIZ_16 (0x2 << 6) +#define CCR_SSIZ_32 (0x0 << 4) +#define CCR_SSIZ_8 (0x1 << 4) +#define CCR_SSIZ_16 (0x2 << 4) +#define CCR_REN (1<<3) +#define CCR_RPT (1<<2) +#define CCR_FRC (1<<1) +#define CCR_CEN (1<<0) +#define RTOR_EN (1<<15) +#define RTOR_CLK (1<<14) +#define RTOR_PSC (1<<13) + +enum imxdma_prep_type { + IMXDMA_DESC_MEMCPY, + IMXDMA_DESC_INTERLEAVED, + IMXDMA_DESC_SLAVE_SG, + IMXDMA_DESC_CYCLIC, +}; + +struct imx_dma_2d_config { + u16 xsr; + u16 ysr; + u16 wsr; + int count; +}; + +struct imxdma_desc { + struct list_head node; + struct dma_async_tx_descriptor desc; + enum dma_status status; + dma_addr_t src; + dma_addr_t dest; + size_t len; + enum dma_transfer_direction direction; + enum imxdma_prep_type type; + /* For memcpy and interleaved */ + unsigned int config_port; + unsigned int config_mem; + /* For interleaved transfers */ + unsigned int x; + unsigned int y; + unsigned int w; + /* For slave sg and cyclic */ + struct scatterlist *sg; + unsigned int sgcount; +}; + struct imxdma_channel { + int hw_chaining; + struct timer_list watchdog; struct imxdma_engine *imxdma; unsigned int channel; - unsigned int imxdma_channel; + struct tasklet_struct dma_tasklet; + struct list_head ld_free; + struct list_head ld_queue; + struct list_head ld_active; + int descs_allocated; enum dma_slave_buswidth word_size; dma_addr_t per_address; u32 watermark_level; struct dma_chan chan; - spinlock_t lock; struct dma_async_tx_descriptor desc; - dma_cookie_t last_completed; enum dma_status status; int dma_request; struct scatterlist *sg_list; + u32 ccr_from_device; + u32 ccr_to_device; + bool enabled_2d; + int slot_2d; }; -#define MAX_DMA_CHANNELS 8 - struct imxdma_engine { struct device *dev; struct device_dma_parameters dma_parms; struct dma_device dma_device; - struct imxdma_channel channel[MAX_DMA_CHANNELS]; + void __iomem *base; + struct clk *dma_clk; + spinlock_t lock; + struct imx_dma_2d_config slots_2d[IMX_DMA_2D_SLOTS]; + struct imxdma_channel channel[IMX_DMA_CHANNELS]; }; static struct imxdma_channel *to_imxdma_chan(struct dma_chan *chan) @@ -60,36 +183,418 @@ static struct imxdma_channel *to_imxdma_chan(struct dma_chan *chan) return container_of(chan, struct imxdma_channel, chan); } -static void imxdma_handle(struct imxdma_channel *imxdmac) +static inline bool imxdma_chan_is_doing_cyclic(struct imxdma_channel *imxdmac) +{ + struct imxdma_desc *desc; + + if (!list_empty(&imxdmac->ld_active)) { + desc = list_first_entry(&imxdmac->ld_active, struct imxdma_desc, + node); + if (desc->type == IMXDMA_DESC_CYCLIC) + return true; + } + return false; +} + + + +static void imx_dmav1_writel(struct imxdma_engine *imxdma, unsigned val, + unsigned offset) +{ + __raw_writel(val, imxdma->base + offset); +} + +static unsigned imx_dmav1_readl(struct imxdma_engine *imxdma, unsigned offset) +{ + return __raw_readl(imxdma->base + offset); +} + +static int imxdma_hw_chain(struct imxdma_channel *imxdmac) +{ + if (cpu_is_mx27()) + return imxdmac->hw_chaining; + else + return 0; +} + +/* + * imxdma_sg_next - prepare next chunk for scatter-gather DMA emulation + */ +static inline int imxdma_sg_next(struct imxdma_desc *d) { - if (imxdmac->desc.callback) - imxdmac->desc.callback(imxdmac->desc.callback_param); - imxdmac->last_completed = imxdmac->desc.cookie; + struct imxdma_channel *imxdmac = to_imxdma_chan(d->desc.chan); + struct imxdma_engine *imxdma = imxdmac->imxdma; + struct scatterlist *sg = d->sg; + unsigned long now; + + now = min(d->len, sg->length); + if (d->len != IMX_DMA_LENGTH_LOOP) + d->len -= now; + + if (d->direction == DMA_DEV_TO_MEM) + imx_dmav1_writel(imxdma, sg->dma_address, + DMA_DAR(imxdmac->channel)); + else + imx_dmav1_writel(imxdma, sg->dma_address, + DMA_SAR(imxdmac->channel)); + + imx_dmav1_writel(imxdma, now, DMA_CNTR(imxdmac->channel)); + + dev_dbg(imxdma->dev, " %s channel: %d dst 0x%08x, src 0x%08x, " + "size 0x%08x\n", __func__, imxdmac->channel, + imx_dmav1_readl(imxdma, DMA_DAR(imxdmac->channel)), + imx_dmav1_readl(imxdma, DMA_SAR(imxdmac->channel)), + imx_dmav1_readl(imxdma, DMA_CNTR(imxdmac->channel))); + + return now; } -static void imxdma_irq_handler(int channel, void *data) +static void imxdma_enable_hw(struct imxdma_desc *d) { - struct imxdma_channel *imxdmac = data; + struct imxdma_channel *imxdmac = to_imxdma_chan(d->desc.chan); + struct imxdma_engine *imxdma = imxdmac->imxdma; + int channel = imxdmac->channel; + unsigned long flags; + + dev_dbg(imxdma->dev, "%s channel %d\n", __func__, channel); + + local_irq_save(flags); + + imx_dmav1_writel(imxdma, 1 << channel, DMA_DISR); + imx_dmav1_writel(imxdma, imx_dmav1_readl(imxdma, DMA_DIMR) & + ~(1 << channel), DMA_DIMR); + imx_dmav1_writel(imxdma, imx_dmav1_readl(imxdma, DMA_CCR(channel)) | + CCR_CEN | CCR_ACRPT, DMA_CCR(channel)); + + if ((cpu_is_mx21() || cpu_is_mx27()) && + d->sg && imxdma_hw_chain(imxdmac)) { + d->sg = sg_next(d->sg); + if (d->sg) { + u32 tmp; + imxdma_sg_next(d); + tmp = imx_dmav1_readl(imxdma, DMA_CCR(channel)); + imx_dmav1_writel(imxdma, tmp | CCR_RPT | CCR_ACRPT, + DMA_CCR(channel)); + } + } + + local_irq_restore(flags); +} + +static void imxdma_disable_hw(struct imxdma_channel *imxdmac) +{ + struct imxdma_engine *imxdma = imxdmac->imxdma; + int channel = imxdmac->channel; + unsigned long flags; + + dev_dbg(imxdma->dev, "%s channel %d\n", __func__, channel); + + if (imxdma_hw_chain(imxdmac)) + del_timer(&imxdmac->watchdog); + + local_irq_save(flags); + imx_dmav1_writel(imxdma, imx_dmav1_readl(imxdma, DMA_DIMR) | + (1 << channel), DMA_DIMR); + imx_dmav1_writel(imxdma, imx_dmav1_readl(imxdma, DMA_CCR(channel)) & + ~CCR_CEN, DMA_CCR(channel)); + imx_dmav1_writel(imxdma, 1 << channel, DMA_DISR); + local_irq_restore(flags); +} + +static void imxdma_watchdog(unsigned long data) +{ + struct imxdma_channel *imxdmac = (struct imxdma_channel *)data; + struct imxdma_engine *imxdma = imxdmac->imxdma; + int channel = imxdmac->channel; + + imx_dmav1_writel(imxdma, 0, DMA_CCR(channel)); - imxdmac->status = DMA_SUCCESS; - imxdma_handle(imxdmac); + /* Tasklet watchdog error handler */ + tasklet_schedule(&imxdmac->dma_tasklet); + dev_dbg(imxdma->dev, "channel %d: watchdog timeout!\n", + imxdmac->channel); } -static void imxdma_err_handler(int channel, void *data, int error) +static irqreturn_t imxdma_err_handler(int irq, void *dev_id) { - struct imxdma_channel *imxdmac = data; + struct imxdma_engine *imxdma = dev_id; + unsigned int err_mask; + int i, disr; + int errcode; + + disr = imx_dmav1_readl(imxdma, DMA_DISR); + + err_mask = imx_dmav1_readl(imxdma, DMA_DBTOSR) | + imx_dmav1_readl(imxdma, DMA_DRTOSR) | + imx_dmav1_readl(imxdma, DMA_DSESR) | + imx_dmav1_readl(imxdma, DMA_DBOSR); + + if (!err_mask) + return IRQ_HANDLED; + + imx_dmav1_writel(imxdma, disr & err_mask, DMA_DISR); + + for (i = 0; i < IMX_DMA_CHANNELS; i++) { + if (!(err_mask & (1 << i))) + continue; + errcode = 0; + + if (imx_dmav1_readl(imxdma, DMA_DBTOSR) & (1 << i)) { + imx_dmav1_writel(imxdma, 1 << i, DMA_DBTOSR); + errcode |= IMX_DMA_ERR_BURST; + } + if (imx_dmav1_readl(imxdma, DMA_DRTOSR) & (1 << i)) { + imx_dmav1_writel(imxdma, 1 << i, DMA_DRTOSR); + errcode |= IMX_DMA_ERR_REQUEST; + } + if (imx_dmav1_readl(imxdma, DMA_DSESR) & (1 << i)) { + imx_dmav1_writel(imxdma, 1 << i, DMA_DSESR); + errcode |= IMX_DMA_ERR_TRANSFER; + } + if (imx_dmav1_readl(imxdma, DMA_DBOSR) & (1 << i)) { + imx_dmav1_writel(imxdma, 1 << i, DMA_DBOSR); + errcode |= IMX_DMA_ERR_BUFFER; + } + /* Tasklet error handler */ + tasklet_schedule(&imxdma->channel[i].dma_tasklet); + + printk(KERN_WARNING + "DMA timeout on channel %d -%s%s%s%s\n", i, + errcode & IMX_DMA_ERR_BURST ? " burst" : "", + errcode & IMX_DMA_ERR_REQUEST ? " request" : "", + errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "", + errcode & IMX_DMA_ERR_BUFFER ? " buffer" : ""); + } + return IRQ_HANDLED; +} + +static void dma_irq_handle_channel(struct imxdma_channel *imxdmac) +{ + struct imxdma_engine *imxdma = imxdmac->imxdma; + int chno = imxdmac->channel; + struct imxdma_desc *desc; + + spin_lock(&imxdma->lock); + if (list_empty(&imxdmac->ld_active)) { + spin_unlock(&imxdma->lock); + goto out; + } + + desc = list_first_entry(&imxdmac->ld_active, + struct imxdma_desc, + node); + spin_unlock(&imxdma->lock); + + if (desc->sg) { + u32 tmp; + desc->sg = sg_next(desc->sg); + + if (desc->sg) { + imxdma_sg_next(desc); + + tmp = imx_dmav1_readl(imxdma, DMA_CCR(chno)); + + if (imxdma_hw_chain(imxdmac)) { + /* FIXME: The timeout should probably be + * configurable + */ + mod_timer(&imxdmac->watchdog, + jiffies + msecs_to_jiffies(500)); + + tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT; + imx_dmav1_writel(imxdma, tmp, DMA_CCR(chno)); + } else { + imx_dmav1_writel(imxdma, tmp & ~CCR_CEN, + DMA_CCR(chno)); + tmp |= CCR_CEN; + } + + imx_dmav1_writel(imxdma, tmp, DMA_CCR(chno)); + + if (imxdma_chan_is_doing_cyclic(imxdmac)) + /* Tasklet progression */ + tasklet_schedule(&imxdmac->dma_tasklet); + + return; + } + + if (imxdma_hw_chain(imxdmac)) { + del_timer(&imxdmac->watchdog); + return; + } + } + +out: + imx_dmav1_writel(imxdma, 0, DMA_CCR(chno)); + /* Tasklet irq */ + tasklet_schedule(&imxdmac->dma_tasklet); +} + +static irqreturn_t dma_irq_handler(int irq, void *dev_id) +{ + struct imxdma_engine *imxdma = dev_id; + int i, disr; + + if (cpu_is_mx21() || cpu_is_mx27()) + imxdma_err_handler(irq, dev_id); + + disr = imx_dmav1_readl(imxdma, DMA_DISR); + + dev_dbg(imxdma->dev, "%s called, disr=0x%08x\n", __func__, disr); + + imx_dmav1_writel(imxdma, disr, DMA_DISR); + for (i = 0; i < IMX_DMA_CHANNELS; i++) { + if (disr & (1 << i)) + dma_irq_handle_channel(&imxdma->channel[i]); + } + + return IRQ_HANDLED; +} + +static int imxdma_xfer_desc(struct imxdma_desc *d) +{ + struct imxdma_channel *imxdmac = to_imxdma_chan(d->desc.chan); + struct imxdma_engine *imxdma = imxdmac->imxdma; + unsigned long flags; + int slot = -1; + int i; + + /* Configure and enable */ + switch (d->type) { + case IMXDMA_DESC_INTERLEAVED: + /* Try to get a free 2D slot */ + spin_lock_irqsave(&imxdma->lock, flags); + for (i = 0; i < IMX_DMA_2D_SLOTS; i++) { + if ((imxdma->slots_2d[i].count > 0) && + ((imxdma->slots_2d[i].xsr != d->x) || + (imxdma->slots_2d[i].ysr != d->y) || + (imxdma->slots_2d[i].wsr != d->w))) + continue; + slot = i; + break; + } + if (slot < 0) + return -EBUSY; + + imxdma->slots_2d[slot].xsr = d->x; + imxdma->slots_2d[slot].ysr = d->y; + imxdma->slots_2d[slot].wsr = d->w; + imxdma->slots_2d[slot].count++; + + imxdmac->slot_2d = slot; + imxdmac->enabled_2d = true; + spin_unlock_irqrestore(&imxdma->lock, flags); + + if (slot == IMX_DMA_2D_SLOT_A) { + d->config_mem &= ~CCR_MSEL_B; + d->config_port &= ~CCR_MSEL_B; + imx_dmav1_writel(imxdma, d->x, DMA_XSRA); + imx_dmav1_writel(imxdma, d->y, DMA_YSRA); + imx_dmav1_writel(imxdma, d->w, DMA_WSRA); + } else { + d->config_mem |= CCR_MSEL_B; + d->config_port |= CCR_MSEL_B; + imx_dmav1_writel(imxdma, d->x, DMA_XSRB); + imx_dmav1_writel(imxdma, d->y, DMA_YSRB); + imx_dmav1_writel(imxdma, d->w, DMA_WSRB); + } + /* + * We fall-through here intentionally, since a 2D transfer is + * similar to MEMCPY just adding the 2D slot configuration. + */ + case IMXDMA_DESC_MEMCPY: + imx_dmav1_writel(imxdma, d->src, DMA_SAR(imxdmac->channel)); + imx_dmav1_writel(imxdma, d->dest, DMA_DAR(imxdmac->channel)); + imx_dmav1_writel(imxdma, d->config_mem | (d->config_port << 2), + DMA_CCR(imxdmac->channel)); + + imx_dmav1_writel(imxdma, d->len, DMA_CNTR(imxdmac->channel)); + + dev_dbg(imxdma->dev, "%s channel: %d dest=0x%08x src=0x%08x " + "dma_length=%d\n", __func__, imxdmac->channel, + d->dest, d->src, d->len); + + break; + /* Cyclic transfer is the same as slave_sg with special sg configuration. */ + case IMXDMA_DESC_CYCLIC: + case IMXDMA_DESC_SLAVE_SG: + if (d->direction == DMA_DEV_TO_MEM) { + imx_dmav1_writel(imxdma, imxdmac->per_address, + DMA_SAR(imxdmac->channel)); + imx_dmav1_writel(imxdma, imxdmac->ccr_from_device, + DMA_CCR(imxdmac->channel)); + + dev_dbg(imxdma->dev, "%s channel: %d sg=%p sgcount=%d " + "total length=%d dev_addr=0x%08x (dev2mem)\n", + __func__, imxdmac->channel, d->sg, d->sgcount, + d->len, imxdmac->per_address); + } else if (d->direction == DMA_MEM_TO_DEV) { + imx_dmav1_writel(imxdma, imxdmac->per_address, + DMA_DAR(imxdmac->channel)); + imx_dmav1_writel(imxdma, imxdmac->ccr_to_device, + DMA_CCR(imxdmac->channel)); + + dev_dbg(imxdma->dev, "%s channel: %d sg=%p sgcount=%d " + "total length=%d dev_addr=0x%08x (mem2dev)\n", + __func__, imxdmac->channel, d->sg, d->sgcount, + d->len, imxdmac->per_address); + } else { + dev_err(imxdma->dev, "%s channel: %d bad dma mode\n", + __func__, imxdmac->channel); + return -EINVAL; + } + + imxdma_sg_next(d); - imxdmac->status = DMA_ERROR; - imxdma_handle(imxdmac); + break; + default: + return -EINVAL; + } + imxdma_enable_hw(d); + return 0; } -static void imxdma_progression(int channel, void *data, - struct scatterlist *sg) +static void imxdma_tasklet(unsigned long data) { - struct imxdma_channel *imxdmac = data; + struct imxdma_channel *imxdmac = (void *)data; + struct imxdma_engine *imxdma = imxdmac->imxdma; + struct imxdma_desc *desc; - imxdmac->status = DMA_SUCCESS; - imxdma_handle(imxdmac); + spin_lock(&imxdma->lock); + + if (list_empty(&imxdmac->ld_active)) { + /* Someone might have called terminate all */ + goto out; + } + desc = list_first_entry(&imxdmac->ld_active, struct imxdma_desc, node); + + if (desc->desc.callback) + desc->desc.callback(desc->desc.callback_param); + + dma_cookie_complete(&desc->desc); + + /* If we are dealing with a cyclic descriptor keep it on ld_active */ + if (imxdma_chan_is_doing_cyclic(imxdmac)) + goto out; + + /* Free 2D slot if it was an interleaved transfer */ + if (imxdmac->enabled_2d) { + imxdma->slots_2d[imxdmac->slot_2d].count--; + imxdmac->enabled_2d = false; + } + + list_move_tail(imxdmac->ld_active.next, &imxdmac->ld_free); + + if (!list_empty(&imxdmac->ld_queue)) { + desc = list_first_entry(&imxdmac->ld_queue, struct imxdma_desc, + node); + list_move_tail(imxdmac->ld_queue.next, &imxdmac->ld_active); + if (imxdma_xfer_desc(desc) < 0) + dev_warn(imxdma->dev, "%s: channel: %d couldn't xfer desc\n", + __func__, imxdmac->channel); + } +out: + spin_unlock(&imxdma->lock); } static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, @@ -97,13 +602,18 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, { struct imxdma_channel *imxdmac = to_imxdma_chan(chan); struct dma_slave_config *dmaengine_cfg = (void *)arg; - int ret; + struct imxdma_engine *imxdma = imxdmac->imxdma; + unsigned long flags; unsigned int mode = 0; switch (cmd) { case DMA_TERMINATE_ALL: - imxdmac->status = DMA_ERROR; - imx_dma_disable(imxdmac->imxdma_channel); + imxdma_disable_hw(imxdmac); + + spin_lock_irqsave(&imxdma->lock, flags); + list_splice_tail_init(&imxdmac->ld_active, &imxdmac->ld_free); + list_splice_tail_init(&imxdmac->ld_queue, &imxdmac->ld_free); + spin_unlock_irqrestore(&imxdma->lock, flags); return 0; case DMA_SLAVE_CONFIG: if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) { @@ -128,16 +638,22 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, mode = IMX_DMA_MEMSIZE_32; break; } - ret = imx_dma_config_channel(imxdmac->imxdma_channel, - mode | IMX_DMA_TYPE_FIFO, - IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, - imxdmac->dma_request, 1); - - if (ret) - return ret; - imx_dma_config_burstlen(imxdmac->imxdma_channel, - imxdmac->watermark_level * imxdmac->word_size); + imxdmac->hw_chaining = 1; + if (!imxdma_hw_chain(imxdmac)) + return -EINVAL; + imxdmac->ccr_from_device = (mode | IMX_DMA_TYPE_FIFO) | + ((IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR) << 2) | + CCR_REN; + imxdmac->ccr_to_device = + (IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR) | + ((mode | IMX_DMA_TYPE_FIFO) << 2) | CCR_REN; + imx_dmav1_writel(imxdma, imxdmac->dma_request, + DMA_RSSR(imxdmac->channel)); + + /* Set burst length */ + imx_dmav1_writel(imxdma, imxdmac->watermark_level * + imxdmac->word_size, DMA_BLR(imxdmac->channel)); return 0; default: @@ -151,43 +667,20 @@ static enum dma_status imxdma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - struct imxdma_channel *imxdmac = to_imxdma_chan(chan); - dma_cookie_t last_used; - enum dma_status ret; - - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, imxdmac->last_completed, last_used); - dma_set_tx_state(txstate, imxdmac->last_completed, last_used, 0); - - return ret; -} - -static dma_cookie_t imxdma_assign_cookie(struct imxdma_channel *imxdma) -{ - dma_cookie_t cookie = imxdma->chan.cookie; - - if (++cookie < 0) - cookie = 1; - - imxdma->chan.cookie = cookie; - imxdma->desc.cookie = cookie; - - return cookie; + return dma_cookie_status(chan, cookie, txstate); } static dma_cookie_t imxdma_tx_submit(struct dma_async_tx_descriptor *tx) { struct imxdma_channel *imxdmac = to_imxdma_chan(tx->chan); + struct imxdma_engine *imxdma = imxdmac->imxdma; dma_cookie_t cookie; + unsigned long flags; - spin_lock_irq(&imxdmac->lock); - - cookie = imxdma_assign_cookie(imxdmac); - - imx_dma_enable(imxdmac->imxdma_channel); - - spin_unlock_irq(&imxdmac->lock); + spin_lock_irqsave(&imxdma->lock, flags); + list_move_tail(imxdmac->ld_free.next, &imxdmac->ld_queue); + cookie = dma_cookie_assign(tx); + spin_unlock_irqrestore(&imxdma->lock, flags); return cookie; } @@ -197,23 +690,52 @@ static int imxdma_alloc_chan_resources(struct dma_chan *chan) struct imxdma_channel *imxdmac = to_imxdma_chan(chan); struct imx_dma_data *data = chan->private; - imxdmac->dma_request = data->dma_request; + if (data != NULL) + imxdmac->dma_request = data->dma_request; - dma_async_tx_descriptor_init(&imxdmac->desc, chan); - imxdmac->desc.tx_submit = imxdma_tx_submit; - /* txd.flags will be overwritten in prep funcs */ - imxdmac->desc.flags = DMA_CTRL_ACK; + while (imxdmac->descs_allocated < IMXDMA_MAX_CHAN_DESCRIPTORS) { + struct imxdma_desc *desc; - imxdmac->status = DMA_SUCCESS; + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + break; + __memzero(&desc->desc, sizeof(struct dma_async_tx_descriptor)); + dma_async_tx_descriptor_init(&desc->desc, chan); + desc->desc.tx_submit = imxdma_tx_submit; + /* txd.flags will be overwritten in prep funcs */ + desc->desc.flags = DMA_CTRL_ACK; + desc->status = DMA_SUCCESS; + + list_add_tail(&desc->node, &imxdmac->ld_free); + imxdmac->descs_allocated++; + } - return 0; + if (!imxdmac->descs_allocated) + return -ENOMEM; + + return imxdmac->descs_allocated; } static void imxdma_free_chan_resources(struct dma_chan *chan) { struct imxdma_channel *imxdmac = to_imxdma_chan(chan); + struct imxdma_engine *imxdma = imxdmac->imxdma; + struct imxdma_desc *desc, *_desc; + unsigned long flags; + + spin_lock_irqsave(&imxdma->lock, flags); + + imxdma_disable_hw(imxdmac); + list_splice_tail_init(&imxdmac->ld_active, &imxdmac->ld_free); + list_splice_tail_init(&imxdmac->ld_queue, &imxdmac->ld_free); - imx_dma_disable(imxdmac->imxdma_channel); + spin_unlock_irqrestore(&imxdma->lock, flags); + + list_for_each_entry_safe(desc, _desc, &imxdmac->ld_free, node) { + kfree(desc); + imxdmac->descs_allocated--; + } + INIT_LIST_HEAD(&imxdmac->ld_free); if (imxdmac->sg_list) { kfree(imxdmac->sg_list); @@ -224,27 +746,23 @@ static void imxdma_free_chan_resources(struct dma_chan *chan) static struct dma_async_tx_descriptor *imxdma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct imxdma_channel *imxdmac = to_imxdma_chan(chan); struct scatterlist *sg; - int i, ret, dma_length = 0; - unsigned int dmamode; + int i, dma_length = 0; + struct imxdma_desc *desc; - if (imxdmac->status == DMA_IN_PROGRESS) + if (list_empty(&imxdmac->ld_free) || + imxdma_chan_is_doing_cyclic(imxdmac)) return NULL; - imxdmac->status = DMA_IN_PROGRESS; + desc = list_first_entry(&imxdmac->ld_free, struct imxdma_desc, node); for_each_sg(sgl, sg, sg_len, i) { dma_length += sg->length; } - if (direction == DMA_DEV_TO_MEM) - dmamode = DMA_MODE_READ; - else - dmamode = DMA_MODE_WRITE; - switch (imxdmac->word_size) { case DMA_SLAVE_BUSWIDTH_4_BYTES: if (sgl->length & 3 || sgl->dma_address & 3) @@ -260,37 +778,41 @@ static struct dma_async_tx_descriptor *imxdma_prep_slave_sg( return NULL; } - ret = imx_dma_setup_sg(imxdmac->imxdma_channel, sgl, sg_len, - dma_length, imxdmac->per_address, dmamode); - if (ret) - return NULL; + desc->type = IMXDMA_DESC_SLAVE_SG; + desc->sg = sgl; + desc->sgcount = sg_len; + desc->len = dma_length; + desc->direction = direction; + if (direction == DMA_DEV_TO_MEM) { + desc->src = imxdmac->per_address; + } else { + desc->dest = imxdmac->per_address; + } + desc->desc.callback = NULL; + desc->desc.callback_param = NULL; - return &imxdmac->desc; + return &desc->desc; } static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct imxdma_channel *imxdmac = to_imxdma_chan(chan); struct imxdma_engine *imxdma = imxdmac->imxdma; - int i, ret; + struct imxdma_desc *desc; + int i; unsigned int periods = buf_len / period_len; - unsigned int dmamode; dev_dbg(imxdma->dev, "%s channel: %d buf_len=%d period_len=%d\n", __func__, imxdmac->channel, buf_len, period_len); - if (imxdmac->status == DMA_IN_PROGRESS) + if (list_empty(&imxdmac->ld_free) || + imxdma_chan_is_doing_cyclic(imxdmac)) return NULL; - imxdmac->status = DMA_IN_PROGRESS; - ret = imx_dma_setup_progression_handler(imxdmac->imxdma_channel, - imxdma_progression); - if (ret) { - dev_err(imxdma->dev, "Failed to setup the DMA handler\n"); - return NULL; - } + desc = list_first_entry(&imxdmac->ld_free, struct imxdma_desc, node); if (imxdmac->sg_list) kfree(imxdmac->sg_list); @@ -316,62 +838,221 @@ static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic( imxdmac->sg_list[periods].page_link = ((unsigned long)imxdmac->sg_list | 0x01) & ~0x02; - if (direction == DMA_DEV_TO_MEM) - dmamode = DMA_MODE_READ; - else - dmamode = DMA_MODE_WRITE; + desc->type = IMXDMA_DESC_CYCLIC; + desc->sg = imxdmac->sg_list; + desc->sgcount = periods; + desc->len = IMX_DMA_LENGTH_LOOP; + desc->direction = direction; + if (direction == DMA_DEV_TO_MEM) { + desc->src = imxdmac->per_address; + } else { + desc->dest = imxdmac->per_address; + } + desc->desc.callback = NULL; + desc->desc.callback_param = NULL; + + return &desc->desc; +} + +static struct dma_async_tx_descriptor *imxdma_prep_dma_memcpy( + struct dma_chan *chan, dma_addr_t dest, + dma_addr_t src, size_t len, unsigned long flags) +{ + struct imxdma_channel *imxdmac = to_imxdma_chan(chan); + struct imxdma_engine *imxdma = imxdmac->imxdma; + struct imxdma_desc *desc; - ret = imx_dma_setup_sg(imxdmac->imxdma_channel, imxdmac->sg_list, periods, - IMX_DMA_LENGTH_LOOP, imxdmac->per_address, dmamode); - if (ret) + dev_dbg(imxdma->dev, "%s channel: %d src=0x%x dst=0x%x len=%d\n", + __func__, imxdmac->channel, src, dest, len); + + if (list_empty(&imxdmac->ld_free) || + imxdma_chan_is_doing_cyclic(imxdmac)) return NULL; - return &imxdmac->desc; + desc = list_first_entry(&imxdmac->ld_free, struct imxdma_desc, node); + + desc->type = IMXDMA_DESC_MEMCPY; + desc->src = src; + desc->dest = dest; + desc->len = len; + desc->direction = DMA_MEM_TO_MEM; + desc->config_port = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR; + desc->config_mem = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR; + desc->desc.callback = NULL; + desc->desc.callback_param = NULL; + + return &desc->desc; +} + +static struct dma_async_tx_descriptor *imxdma_prep_dma_interleaved( + struct dma_chan *chan, struct dma_interleaved_template *xt, + unsigned long flags) +{ + struct imxdma_channel *imxdmac = to_imxdma_chan(chan); + struct imxdma_engine *imxdma = imxdmac->imxdma; + struct imxdma_desc *desc; + + dev_dbg(imxdma->dev, "%s channel: %d src_start=0x%x dst_start=0x%x\n" + " src_sgl=%s dst_sgl=%s numf=%d frame_size=%d\n", __func__, + imxdmac->channel, xt->src_start, xt->dst_start, + xt->src_sgl ? "true" : "false", xt->dst_sgl ? "true" : "false", + xt->numf, xt->frame_size); + + if (list_empty(&imxdmac->ld_free) || + imxdma_chan_is_doing_cyclic(imxdmac)) + return NULL; + + if (xt->frame_size != 1 || xt->numf <= 0 || xt->dir != DMA_MEM_TO_MEM) + return NULL; + + desc = list_first_entry(&imxdmac->ld_free, struct imxdma_desc, node); + + desc->type = IMXDMA_DESC_INTERLEAVED; + desc->src = xt->src_start; + desc->dest = xt->dst_start; + desc->x = xt->sgl[0].size; + desc->y = xt->numf; + desc->w = xt->sgl[0].icg + desc->x; + desc->len = desc->x * desc->y; + desc->direction = DMA_MEM_TO_MEM; + desc->config_port = IMX_DMA_MEMSIZE_32; + desc->config_mem = IMX_DMA_MEMSIZE_32; + if (xt->src_sgl) + desc->config_mem |= IMX_DMA_TYPE_2D; + if (xt->dst_sgl) + desc->config_port |= IMX_DMA_TYPE_2D; + desc->desc.callback = NULL; + desc->desc.callback_param = NULL; + + return &desc->desc; } static void imxdma_issue_pending(struct dma_chan *chan) { - /* - * Nothing to do. We only have a single descriptor - */ + struct imxdma_channel *imxdmac = to_imxdma_chan(chan); + struct imxdma_engine *imxdma = imxdmac->imxdma; + struct imxdma_desc *desc; + unsigned long flags; + + spin_lock_irqsave(&imxdma->lock, flags); + if (list_empty(&imxdmac->ld_active) && + !list_empty(&imxdmac->ld_queue)) { + desc = list_first_entry(&imxdmac->ld_queue, + struct imxdma_desc, node); + + if (imxdma_xfer_desc(desc) < 0) { + dev_warn(imxdma->dev, + "%s: channel: %d couldn't issue DMA xfer\n", + __func__, imxdmac->channel); + } else { + list_move_tail(imxdmac->ld_queue.next, + &imxdmac->ld_active); + } + } + spin_unlock_irqrestore(&imxdma->lock, flags); } static int __init imxdma_probe(struct platform_device *pdev) -{ + { struct imxdma_engine *imxdma; int ret, i; + imxdma = kzalloc(sizeof(*imxdma), GFP_KERNEL); if (!imxdma) return -ENOMEM; + if (cpu_is_mx1()) { + imxdma->base = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); + } else if (cpu_is_mx21()) { + imxdma->base = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); + } else if (cpu_is_mx27()) { + imxdma->base = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); + } else { + kfree(imxdma); + return 0; + } + + imxdma->dma_clk = clk_get(NULL, "dma"); + if (IS_ERR(imxdma->dma_clk)) + return PTR_ERR(imxdma->dma_clk); + clk_enable(imxdma->dma_clk); + + /* reset DMA module */ + imx_dmav1_writel(imxdma, DCR_DRST, DMA_DCR); + + if (cpu_is_mx1()) { + ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", imxdma); + if (ret) { + dev_warn(imxdma->dev, "Can't register IRQ for DMA\n"); + kfree(imxdma); + return ret; + } + + ret = request_irq(MX1_DMA_ERR, imxdma_err_handler, 0, "DMA", imxdma); + if (ret) { + dev_warn(imxdma->dev, "Can't register ERRIRQ for DMA\n"); + free_irq(MX1_DMA_INT, NULL); + kfree(imxdma); + return ret; + } + } + + /* enable DMA module */ + imx_dmav1_writel(imxdma, DCR_DEN, DMA_DCR); + + /* clear all interrupts */ + imx_dmav1_writel(imxdma, (1 << IMX_DMA_CHANNELS) - 1, DMA_DISR); + + /* disable interrupts */ + imx_dmav1_writel(imxdma, (1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR); + INIT_LIST_HEAD(&imxdma->dma_device.channels); dma_cap_set(DMA_SLAVE, imxdma->dma_device.cap_mask); dma_cap_set(DMA_CYCLIC, imxdma->dma_device.cap_mask); + dma_cap_set(DMA_MEMCPY, imxdma->dma_device.cap_mask); + dma_cap_set(DMA_INTERLEAVE, imxdma->dma_device.cap_mask); + + /* Initialize 2D global parameters */ + for (i = 0; i < IMX_DMA_2D_SLOTS; i++) + imxdma->slots_2d[i].count = 0; + + spin_lock_init(&imxdma->lock); /* Initialize channel parameters */ - for (i = 0; i < MAX_DMA_CHANNELS; i++) { + for (i = 0; i < IMX_DMA_CHANNELS; i++) { struct imxdma_channel *imxdmac = &imxdma->channel[i]; - imxdmac->imxdma_channel = imx_dma_request_by_prio("dmaengine", - DMA_PRIO_MEDIUM); - if ((int)imxdmac->channel < 0) { - ret = -ENODEV; - goto err_init; + if (cpu_is_mx21() || cpu_is_mx27()) { + ret = request_irq(MX2x_INT_DMACH0 + i, + dma_irq_handler, 0, "DMA", imxdma); + if (ret) { + dev_warn(imxdma->dev, "Can't register IRQ %d " + "for DMA channel %d\n", + MX2x_INT_DMACH0 + i, i); + goto err_init; + } + init_timer(&imxdmac->watchdog); + imxdmac->watchdog.function = &imxdma_watchdog; + imxdmac->watchdog.data = (unsigned long)imxdmac; } - imx_dma_setup_handlers(imxdmac->imxdma_channel, - imxdma_irq_handler, imxdma_err_handler, imxdmac); - imxdmac->imxdma = imxdma; - spin_lock_init(&imxdmac->lock); + INIT_LIST_HEAD(&imxdmac->ld_queue); + INIT_LIST_HEAD(&imxdmac->ld_free); + INIT_LIST_HEAD(&imxdmac->ld_active); + + tasklet_init(&imxdmac->dma_tasklet, imxdma_tasklet, + (unsigned long)imxdmac); imxdmac->chan.device = &imxdma->dma_device; + dma_cookie_init(&imxdmac->chan); imxdmac->channel = i; /* Add the channel to the DMAC list */ - list_add_tail(&imxdmac->chan.device_node, &imxdma->dma_device.channels); + list_add_tail(&imxdmac->chan.device_node, + &imxdma->dma_device.channels); } imxdma->dev = &pdev->dev; @@ -382,11 +1063,14 @@ static int __init imxdma_probe(struct platform_device *pdev) imxdma->dma_device.device_tx_status = imxdma_tx_status; imxdma->dma_device.device_prep_slave_sg = imxdma_prep_slave_sg; imxdma->dma_device.device_prep_dma_cyclic = imxdma_prep_dma_cyclic; + imxdma->dma_device.device_prep_dma_memcpy = imxdma_prep_dma_memcpy; + imxdma->dma_device.device_prep_interleaved_dma = imxdma_prep_dma_interleaved; imxdma->dma_device.device_control = imxdma_control; imxdma->dma_device.device_issue_pending = imxdma_issue_pending; platform_set_drvdata(pdev, imxdma); + imxdma->dma_device.copy_align = 2; /* 2^2 = 4 bytes alignment */ imxdma->dma_device.dev->dma_parms = &imxdma->dma_parms; dma_set_max_seg_size(imxdma->dma_device.dev, 0xffffff); @@ -399,9 +1083,13 @@ static int __init imxdma_probe(struct platform_device *pdev) return 0; err_init: - while (--i >= 0) { - struct imxdma_channel *imxdmac = &imxdma->channel[i]; - imx_dma_free(imxdmac->imxdma_channel); + + if (cpu_is_mx21() || cpu_is_mx27()) { + while (--i >= 0) + free_irq(MX2x_INT_DMACH0 + i, NULL); + } else if cpu_is_mx1() { + free_irq(MX1_DMA_INT, NULL); + free_irq(MX1_DMA_ERR, NULL); } kfree(imxdma); @@ -415,10 +1103,12 @@ static int __exit imxdma_remove(struct platform_device *pdev) dma_async_device_unregister(&imxdma->dma_device); - for (i = 0; i < MAX_DMA_CHANNELS; i++) { - struct imxdma_channel *imxdmac = &imxdma->channel[i]; - - imx_dma_free(imxdmac->imxdma_channel); + if (cpu_is_mx21() || cpu_is_mx27()) { + for (i = 0; i < IMX_DMA_CHANNELS; i++) + free_irq(MX2x_INT_DMACH0 + i, NULL); + } else if cpu_is_mx1() { + free_irq(MX1_DMA_INT, NULL); + free_irq(MX1_DMA_ERR, NULL); } kfree(imxdma); diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 63540d3..d3e38e2 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/types.h> +#include <linux/bitops.h> #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/clk.h> @@ -41,6 +42,8 @@ #include <mach/dma.h> #include <mach/hardware.h> +#include "dmaengine.h" + /* SDMA registers */ #define SDMA_H_C0PTR 0x000 #define SDMA_H_INTR 0x004 @@ -259,19 +262,18 @@ struct sdma_channel { unsigned int pc_from_device, pc_to_device; unsigned long flags; dma_addr_t per_address; - u32 event_mask0, event_mask1; - u32 watermark_level; + unsigned long event_mask[2]; + unsigned long watermark_level; u32 shp_addr, per_addr; struct dma_chan chan; spinlock_t lock; struct dma_async_tx_descriptor desc; - dma_cookie_t last_completed; enum dma_status status; unsigned int chn_count; unsigned int chn_real_count; }; -#define IMX_DMA_SG_LOOP (1 << 0) +#define IMX_DMA_SG_LOOP BIT(0) #define MAX_DMA_CHANNELS 32 #define MXC_SDMA_DEFAULT_PRIORITY 1 @@ -345,9 +347,9 @@ static const struct of_device_id sdma_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, sdma_dt_ids); -#define SDMA_H_CONFIG_DSPDMA (1 << 12) /* indicates if the DSPDMA is used */ -#define SDMA_H_CONFIG_RTD_PINS (1 << 11) /* indicates if Real-Time Debug pins are enabled */ -#define SDMA_H_CONFIG_ACR (1 << 4) /* indicates if AHB freq /core freq = 2 or 1 */ +#define SDMA_H_CONFIG_DSPDMA BIT(12) /* indicates if the DSPDMA is used */ +#define SDMA_H_CONFIG_RTD_PINS BIT(11) /* indicates if Real-Time Debug pins are enabled */ +#define SDMA_H_CONFIG_ACR BIT(4) /* indicates if AHB freq /core freq = 2 or 1 */ #define SDMA_H_CONFIG_CSM (3) /* indicates which context switch mode is selected*/ static inline u32 chnenbl_ofs(struct sdma_engine *sdma, unsigned int event) @@ -362,37 +364,42 @@ static int sdma_config_ownership(struct sdma_channel *sdmac, { struct sdma_engine *sdma = sdmac->sdma; int channel = sdmac->channel; - u32 evt, mcu, dsp; + unsigned long evt, mcu, dsp; if (event_override && mcu_override && dsp_override) return -EINVAL; - evt = __raw_readl(sdma->regs + SDMA_H_EVTOVR); - mcu = __raw_readl(sdma->regs + SDMA_H_HOSTOVR); - dsp = __raw_readl(sdma->regs + SDMA_H_DSPOVR); + evt = readl_relaxed(sdma->regs + SDMA_H_EVTOVR); + mcu = readl_relaxed(sdma->regs + SDMA_H_HOSTOVR); + dsp = readl_relaxed(sdma->regs + SDMA_H_DSPOVR); if (dsp_override) - dsp &= ~(1 << channel); + __clear_bit(channel, &dsp); else - dsp |= (1 << channel); + __set_bit(channel, &dsp); if (event_override) - evt &= ~(1 << channel); + __clear_bit(channel, &evt); else - evt |= (1 << channel); + __set_bit(channel, &evt); if (mcu_override) - mcu &= ~(1 << channel); + __clear_bit(channel, &mcu); else - mcu |= (1 << channel); + __set_bit(channel, &mcu); - __raw_writel(evt, sdma->regs + SDMA_H_EVTOVR); - __raw_writel(mcu, sdma->regs + SDMA_H_HOSTOVR); - __raw_writel(dsp, sdma->regs + SDMA_H_DSPOVR); + writel_relaxed(evt, sdma->regs + SDMA_H_EVTOVR); + writel_relaxed(mcu, sdma->regs + SDMA_H_HOSTOVR); + writel_relaxed(dsp, sdma->regs + SDMA_H_DSPOVR); return 0; } +static void sdma_enable_channel(struct sdma_engine *sdma, int channel) +{ + writel(BIT(channel), sdma->regs + SDMA_H_START); +} + /* * sdma_run_channel - run a channel and wait till it's done */ @@ -404,7 +411,7 @@ static int sdma_run_channel(struct sdma_channel *sdmac) init_completion(&sdmac->done); - __raw_writel(1 << channel, sdma->regs + SDMA_H_START); + sdma_enable_channel(sdma, channel); ret = wait_for_completion_timeout(&sdmac->done, HZ); @@ -451,12 +458,12 @@ static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event) { struct sdma_engine *sdma = sdmac->sdma; int channel = sdmac->channel; - u32 val; + unsigned long val; u32 chnenbl = chnenbl_ofs(sdma, event); - val = __raw_readl(sdma->regs + chnenbl); - val |= (1 << channel); - __raw_writel(val, sdma->regs + chnenbl); + val = readl_relaxed(sdma->regs + chnenbl); + __set_bit(channel, &val); + writel_relaxed(val, sdma->regs + chnenbl); } static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event) @@ -464,11 +471,11 @@ static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event) struct sdma_engine *sdma = sdmac->sdma; int channel = sdmac->channel; u32 chnenbl = chnenbl_ofs(sdma, event); - u32 val; + unsigned long val; - val = __raw_readl(sdma->regs + chnenbl); - val &= ~(1 << channel); - __raw_writel(val, sdma->regs + chnenbl); + val = readl_relaxed(sdma->regs + chnenbl); + __clear_bit(channel, &val); + writel_relaxed(val, sdma->regs + chnenbl); } static void sdma_handle_channel_loop(struct sdma_channel *sdmac) @@ -522,7 +529,7 @@ static void mxc_sdma_handle_channel_normal(struct sdma_channel *sdmac) else sdmac->status = DMA_SUCCESS; - sdmac->last_completed = sdmac->desc.cookie; + dma_cookie_complete(&sdmac->desc); if (sdmac->desc.callback) sdmac->desc.callback(sdmac->desc.callback_param); } @@ -544,10 +551,10 @@ static void mxc_sdma_handle_channel(struct sdma_channel *sdmac) static irqreturn_t sdma_int_handler(int irq, void *dev_id) { struct sdma_engine *sdma = dev_id; - u32 stat; + unsigned long stat; - stat = __raw_readl(sdma->regs + SDMA_H_INTR); - __raw_writel(stat, sdma->regs + SDMA_H_INTR); + stat = readl_relaxed(sdma->regs + SDMA_H_INTR); + writel_relaxed(stat, sdma->regs + SDMA_H_INTR); while (stat) { int channel = fls(stat) - 1; @@ -555,7 +562,7 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id) mxc_sdma_handle_channel(sdmac); - stat &= ~(1 << channel); + __clear_bit(channel, &stat); } return IRQ_HANDLED; @@ -663,11 +670,11 @@ static int sdma_load_context(struct sdma_channel *sdmac) return load_address; dev_dbg(sdma->dev, "load_address = %d\n", load_address); - dev_dbg(sdma->dev, "wml = 0x%08x\n", sdmac->watermark_level); + dev_dbg(sdma->dev, "wml = 0x%08x\n", (u32)sdmac->watermark_level); dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr); dev_dbg(sdma->dev, "per_addr = 0x%08x\n", sdmac->per_addr); - dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0); - dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1); + dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]); + dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]); mutex_lock(&sdma->channel_0_lock); @@ -677,8 +684,8 @@ static int sdma_load_context(struct sdma_channel *sdmac) /* Send by context the event mask,base address for peripheral * and watermark level */ - context->gReg[0] = sdmac->event_mask1; - context->gReg[1] = sdmac->event_mask0; + context->gReg[0] = sdmac->event_mask[1]; + context->gReg[1] = sdmac->event_mask[0]; context->gReg[2] = sdmac->per_addr; context->gReg[6] = sdmac->shp_addr; context->gReg[7] = sdmac->watermark_level; @@ -701,7 +708,7 @@ static void sdma_disable_channel(struct sdma_channel *sdmac) struct sdma_engine *sdma = sdmac->sdma; int channel = sdmac->channel; - __raw_writel(1 << channel, sdma->regs + SDMA_H_STATSTOP); + writel_relaxed(BIT(channel), sdma->regs + SDMA_H_STATSTOP); sdmac->status = DMA_ERROR; } @@ -711,13 +718,13 @@ static int sdma_config_channel(struct sdma_channel *sdmac) sdma_disable_channel(sdmac); - sdmac->event_mask0 = 0; - sdmac->event_mask1 = 0; + sdmac->event_mask[0] = 0; + sdmac->event_mask[1] = 0; sdmac->shp_addr = 0; sdmac->per_addr = 0; if (sdmac->event_id0) { - if (sdmac->event_id0 > 32) + if (sdmac->event_id0 >= sdmac->sdma->num_events) return -EINVAL; sdma_event_enable(sdmac, sdmac->event_id0); } @@ -740,15 +747,14 @@ static int sdma_config_channel(struct sdma_channel *sdmac) (sdmac->peripheral_type != IMX_DMATYPE_DSP)) { /* Handle multiple event channels differently */ if (sdmac->event_id1) { - sdmac->event_mask1 = 1 << (sdmac->event_id1 % 32); + sdmac->event_mask[1] = BIT(sdmac->event_id1 % 32); if (sdmac->event_id1 > 31) - sdmac->watermark_level |= 1 << 31; - sdmac->event_mask0 = 1 << (sdmac->event_id0 % 32); + __set_bit(31, &sdmac->watermark_level); + sdmac->event_mask[0] = BIT(sdmac->event_id0 % 32); if (sdmac->event_id0 > 31) - sdmac->watermark_level |= 1 << 30; + __set_bit(30, &sdmac->watermark_level); } else { - sdmac->event_mask0 = 1 << sdmac->event_id0; - sdmac->event_mask1 = 1 << (sdmac->event_id0 - 32); + __set_bit(sdmac->event_id0, sdmac->event_mask); } /* Watermark Level */ sdmac->watermark_level |= sdmac->watermark_level; @@ -774,7 +780,7 @@ static int sdma_set_channel_priority(struct sdma_channel *sdmac, return -EINVAL; } - __raw_writel(priority, sdma->regs + SDMA_CHNPRI_0 + 4 * channel); + writel_relaxed(priority, sdma->regs + SDMA_CHNPRI_0 + 4 * channel); return 0; } @@ -796,8 +802,6 @@ static int sdma_request_channel(struct sdma_channel *sdmac) sdma->channel_control[channel].base_bd_ptr = sdmac->bd_phys; sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; - clk_enable(sdma->clk); - sdma_set_channel_priority(sdmac, MXC_SDMA_DEFAULT_PRIORITY); init_completion(&sdmac->done); @@ -810,24 +814,6 @@ out: return ret; } -static void sdma_enable_channel(struct sdma_engine *sdma, int channel) -{ - __raw_writel(1 << channel, sdma->regs + SDMA_H_START); -} - -static dma_cookie_t sdma_assign_cookie(struct sdma_channel *sdmac) -{ - dma_cookie_t cookie = sdmac->chan.cookie; - - if (++cookie < 0) - cookie = 1; - - sdmac->chan.cookie = cookie; - sdmac->desc.cookie = cookie; - - return cookie; -} - static struct sdma_channel *to_sdma_chan(struct dma_chan *chan) { return container_of(chan, struct sdma_channel, chan); @@ -837,14 +823,11 @@ static dma_cookie_t sdma_tx_submit(struct dma_async_tx_descriptor *tx) { unsigned long flags; struct sdma_channel *sdmac = to_sdma_chan(tx->chan); - struct sdma_engine *sdma = sdmac->sdma; dma_cookie_t cookie; spin_lock_irqsave(&sdmac->lock, flags); - cookie = sdma_assign_cookie(sdmac); - - sdma_enable_channel(sdma, sdmac->channel); + cookie = dma_cookie_assign(tx); spin_unlock_irqrestore(&sdmac->lock, flags); @@ -875,11 +858,14 @@ static int sdma_alloc_chan_resources(struct dma_chan *chan) sdmac->peripheral_type = data->peripheral_type; sdmac->event_id0 = data->dma_request; - ret = sdma_set_channel_priority(sdmac, prio); + + clk_enable(sdmac->sdma->clk); + + ret = sdma_request_channel(sdmac); if (ret) return ret; - ret = sdma_request_channel(sdmac); + ret = sdma_set_channel_priority(sdmac, prio); if (ret) return ret; @@ -916,7 +902,7 @@ static void sdma_free_chan_resources(struct dma_chan *chan) static struct dma_async_tx_descriptor *sdma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct sdma_channel *sdmac = to_sdma_chan(chan); struct sdma_engine *sdma = sdmac->sdma; @@ -1014,7 +1000,8 @@ err_out: static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct sdma_channel *sdmac = to_sdma_chan(chan); struct sdma_engine *sdma = sdmac->sdma; @@ -1128,7 +1115,7 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan, last_used = chan->cookie; - dma_set_tx_state(txstate, sdmac->last_completed, last_used, + dma_set_tx_state(txstate, chan->completed_cookie, last_used, sdmac->chn_count - sdmac->chn_real_count); return sdmac->status; @@ -1136,9 +1123,11 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan, static void sdma_issue_pending(struct dma_chan *chan) { - /* - * Nothing to do. We only have a single descriptor - */ + struct sdma_channel *sdmac = to_sdma_chan(chan); + struct sdma_engine *sdma = sdmac->sdma; + + if (sdmac->status == DMA_IN_PROGRESS) + sdma_enable_channel(sdma, sdmac->channel); } #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 @@ -1230,7 +1219,7 @@ static int __init sdma_init(struct sdma_engine *sdma) clk_enable(sdma->clk); /* Be sure SDMA has not started yet */ - __raw_writel(0, sdma->regs + SDMA_H_C0PTR); + writel_relaxed(0, sdma->regs + SDMA_H_C0PTR); sdma->channel_control = dma_alloc_coherent(NULL, MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control) + @@ -1253,11 +1242,11 @@ static int __init sdma_init(struct sdma_engine *sdma) /* disable all channels */ for (i = 0; i < sdma->num_events; i++) - __raw_writel(0, sdma->regs + chnenbl_ofs(sdma, i)); + writel_relaxed(0, sdma->regs + chnenbl_ofs(sdma, i)); /* All channels have priority 0 */ for (i = 0; i < MAX_DMA_CHANNELS; i++) - __raw_writel(0, sdma->regs + SDMA_CHNPRI_0 + i * 4); + writel_relaxed(0, sdma->regs + SDMA_CHNPRI_0 + i * 4); ret = sdma_request_channel(&sdma->channel[0]); if (ret) @@ -1266,16 +1255,16 @@ static int __init sdma_init(struct sdma_engine *sdma) sdma_config_ownership(&sdma->channel[0], false, true, false); /* Set Command Channel (Channel Zero) */ - __raw_writel(0x4050, sdma->regs + SDMA_CHN0ADDR); + writel_relaxed(0x4050, sdma->regs + SDMA_CHN0ADDR); /* Set bits of CONFIG register but with static context switching */ /* FIXME: Check whether to set ACR bit depending on clock ratios */ - __raw_writel(0, sdma->regs + SDMA_H_CONFIG); + writel_relaxed(0, sdma->regs + SDMA_H_CONFIG); - __raw_writel(ccb_phys, sdma->regs + SDMA_H_C0PTR); + writel_relaxed(ccb_phys, sdma->regs + SDMA_H_C0PTR); /* Set bits of CONFIG register with given context switching mode */ - __raw_writel(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG); + writel_relaxed(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG); /* Initializes channel's priorities */ sdma_set_channel_priority(&sdma->channel[0], 7); @@ -1367,6 +1356,7 @@ static int __init sdma_probe(struct platform_device *pdev) spin_lock_init(&sdmac->lock); sdmac->chan.device = &sdma->dma_device; + dma_cookie_init(&sdmac->chan); sdmac->channel = i; /* @@ -1387,7 +1377,9 @@ static int __init sdma_probe(struct platform_device *pdev) sdma_add_scripts(sdma, pdata->script_addrs); if (pdata) { - sdma_get_firmware(sdma, pdata->fw_name); + ret = sdma_get_firmware(sdma, pdata->fw_name); + if (ret) + dev_warn(&pdev->dev, "failed to get firmware from platform data\n"); } else { /* * Because that device tree does not encode ROM script address, @@ -1396,15 +1388,12 @@ static int __init sdma_probe(struct platform_device *pdev) */ ret = of_property_read_string(np, "fsl,sdma-ram-script-name", &fw_name); - if (ret) { - dev_err(&pdev->dev, "failed to get firmware name\n"); - goto err_init; - } - - ret = sdma_get_firmware(sdma, fw_name); - if (ret) { - dev_err(&pdev->dev, "failed to get firmware\n"); - goto err_init; + if (ret) + dev_warn(&pdev->dev, "failed to get firmware name\n"); + else { + ret = sdma_get_firmware(sdma, fw_name); + if (ret) + dev_warn(&pdev->dev, "failed to get firmware from device tree\n"); } } diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 74f70aa..c900ca7 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -29,6 +29,8 @@ #include <linux/intel_mid_dma.h> #include <linux/module.h> +#include "dmaengine.h" + #define MAX_CHAN 4 /*max ch across controllers*/ #include "intel_mid_dma_regs.h" @@ -288,7 +290,7 @@ static void midc_descriptor_complete(struct intel_mid_dma_chan *midc, struct intel_mid_dma_lli *llitem; void *param_txd = NULL; - midc->completed = txd->cookie; + dma_cookie_complete(txd); callback_txd = txd->callback; param_txd = txd->callback_param; @@ -434,14 +436,7 @@ static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx) dma_cookie_t cookie; spin_lock_bh(&midc->lock); - cookie = midc->chan.cookie; - - if (++cookie < 0) - cookie = 1; - - midc->chan.cookie = cookie; - desc->txd.cookie = cookie; - + cookie = dma_cookie_assign(tx); if (list_empty(&midc->active_list)) list_add_tail(&desc->desc_node, &midc->active_list); @@ -482,31 +477,18 @@ static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; - int ret; + struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); + enum dma_status ret; - last_complete = midc->completed; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); if (ret != DMA_SUCCESS) { spin_lock_bh(&midc->lock); midc_scan_descriptors(to_middma_device(chan->device), midc); spin_unlock_bh(&midc->lock); - last_complete = midc->completed; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); } - if (txstate) { - txstate->last = last_complete; - txstate->used = last_used; - txstate->residue = 0; - } return ret; } @@ -732,13 +714,14 @@ err_desc_get: * @sg_len: length of sg txn * @direction: DMA transfer dirtn * @flags: DMA flags + * @context: transfer context (ignored) * * Prepares LLI based periphral transfer */ static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct intel_mid_dma_chan *midc = NULL; struct intel_mid_dma_slave *mids = NULL; @@ -832,7 +815,6 @@ static void intel_mid_dma_free_chan_resources(struct dma_chan *chan) /*trying to free ch in use!!!!!*/ pr_err("ERR_MDMA: trying to free ch in use\n"); } - pm_runtime_put(&mid->pdev->dev); spin_lock_bh(&midc->lock); midc->descs_allocated = 0; list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) { @@ -853,6 +835,7 @@ static void intel_mid_dma_free_chan_resources(struct dma_chan *chan) /* Disable CH interrupts */ iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_BLOCK); iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_ERR); + pm_runtime_put(&mid->pdev->dev); } /** @@ -886,7 +869,7 @@ static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan) pm_runtime_put(&mid->pdev->dev); return -EIO; } - midc->completed = chan->cookie = 1; + dma_cookie_init(chan); spin_lock_bh(&midc->lock); while (midc->descs_allocated < DESCS_PER_CHANNEL) { @@ -1056,7 +1039,8 @@ static irqreturn_t intel_mid_dma_interrupt(int irq, void *data) } err_status &= mid->intr_mask; if (err_status) { - iowrite32(MASK_INTR_REG(err_status), mid->dma_base + MASK_ERR); + iowrite32((err_status << INT_MASK_WE), + mid->dma_base + MASK_ERR); call_tasklet = 1; } if (call_tasklet) @@ -1118,7 +1102,7 @@ static int mid_setup_dma(struct pci_dev *pdev) struct intel_mid_dma_chan *midch = &dma->ch[i]; midch->chan.device = &dma->common; - midch->chan.cookie = 1; + dma_cookie_init(&midch->chan); midch->ch_id = dma->chan_base + i; pr_debug("MDMA:Init CH %d, ID %d\n", i, midch->ch_id); diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h index c83d35b..1bfa926 100644 --- a/drivers/dma/intel_mid_dma_regs.h +++ b/drivers/dma/intel_mid_dma_regs.h @@ -165,7 +165,6 @@ union intel_mid_dma_cfg_hi { * @dma_base: MMIO register space DMA engine base pointer * @ch_id: DMA channel id * @lock: channel spinlock - * @completed: DMA cookie * @active_list: current active descriptors * @queue: current queued up descriptors * @free_list: current free descriptors @@ -183,7 +182,6 @@ struct intel_mid_dma_chan { void __iomem *dma_base; int ch_id; spinlock_t lock; - dma_cookie_t completed; struct list_head active_list; struct list_head queue; struct list_head free_list; diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index a4d6cb0..31493d8 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -40,6 +40,8 @@ #include "registers.h" #include "hw.h" +#include "../dmaengine.h" + int ioat_pending_level = 4; module_param(ioat_pending_level, int, 0644); MODULE_PARM_DESC(ioat_pending_level, @@ -107,6 +109,7 @@ void ioat_init_channel(struct ioatdma_device *device, struct ioat_chan_common *c chan->reg_base = device->reg_base + (0x80 * (idx + 1)); spin_lock_init(&chan->cleanup_lock); chan->common.device = dma; + dma_cookie_init(&chan->common); list_add_tail(&chan->common.device_node, &dma->channels); device->idx[idx] = chan; init_timer(&chan->timer); @@ -235,12 +238,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx) spin_lock_bh(&ioat->desc_lock); /* cookie incr and addition to used_list must be atomic */ - cookie = c->cookie; - cookie++; - if (cookie < 0) - cookie = 1; - c->cookie = cookie; - tx->cookie = cookie; + cookie = dma_cookie_assign(tx); dev_dbg(to_dev(&ioat->base), "%s: cookie: %d\n", __func__, cookie); /* write address into NextDescriptor field of last desc in chain */ @@ -603,8 +601,7 @@ static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete) */ dump_desc_dbg(ioat, desc); if (tx->cookie) { - chan->completed_cookie = tx->cookie; - tx->cookie = 0; + dma_cookie_complete(tx); ioat_dma_unmap(chan, tx->flags, desc->len, desc->hw); ioat->active -= desc->hw->tx_cnt; if (tx->callback) { @@ -733,13 +730,15 @@ ioat_dma_tx_status(struct dma_chan *c, dma_cookie_t cookie, { struct ioat_chan_common *chan = to_chan_common(c); struct ioatdma_device *device = chan->device; + enum dma_status ret; - if (ioat_tx_status(c, cookie, txstate) == DMA_SUCCESS) - return DMA_SUCCESS; + ret = dma_cookie_status(c, cookie, txstate); + if (ret == DMA_SUCCESS) + return ret; device->cleanup_fn((unsigned long) c); - return ioat_tx_status(c, cookie, txstate); + return dma_cookie_status(c, cookie, txstate); } static void ioat1_dma_start_null_desc(struct ioat_dma_chan *ioat) diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 5216c8a..c7888bc 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -90,7 +90,6 @@ struct ioat_chan_common { void __iomem *reg_base; unsigned long last_completion; spinlock_t cleanup_lock; - dma_cookie_t completed_cookie; unsigned long state; #define IOAT_COMPLETION_PENDING 0 #define IOAT_COMPLETION_ACK 1 @@ -143,28 +142,6 @@ static inline struct ioat_dma_chan *to_ioat_chan(struct dma_chan *c) return container_of(chan, struct ioat_dma_chan, base); } -/** - * ioat_tx_status - poll the status of an ioat transaction - * @c: channel handle - * @cookie: transaction identifier - * @txstate: if set, updated with the transaction state - */ -static inline enum dma_status -ioat_tx_status(struct dma_chan *c, dma_cookie_t cookie, - struct dma_tx_state *txstate) -{ - struct ioat_chan_common *chan = to_chan_common(c); - dma_cookie_t last_used; - dma_cookie_t last_complete; - - last_used = c->cookie; - last_complete = chan->completed_cookie; - - dma_set_tx_state(txstate, last_complete, last_used, 0); - - return dma_async_is_complete(cookie, last_complete, last_used); -} - /* wrapper around hardware descriptor format + additional software fields */ /** diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 5d65f83..e8e110f 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -41,6 +41,8 @@ #include "registers.h" #include "hw.h" +#include "../dmaengine.h" + int ioat_ring_alloc_order = 8; module_param(ioat_ring_alloc_order, int, 0644); MODULE_PARM_DESC(ioat_ring_alloc_order, @@ -147,8 +149,7 @@ static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) dump_desc_dbg(ioat, desc); if (tx->cookie) { ioat_dma_unmap(chan, tx->flags, desc->len, desc->hw); - chan->completed_cookie = tx->cookie; - tx->cookie = 0; + dma_cookie_complete(tx); if (tx->callback) { tx->callback(tx->callback_param); tx->callback = NULL; @@ -398,13 +399,9 @@ static dma_cookie_t ioat2_tx_submit_unlock(struct dma_async_tx_descriptor *tx) struct dma_chan *c = tx->chan; struct ioat2_dma_chan *ioat = to_ioat2_chan(c); struct ioat_chan_common *chan = &ioat->base; - dma_cookie_t cookie = c->cookie; + dma_cookie_t cookie; - cookie++; - if (cookie < 0) - cookie = 1; - tx->cookie = cookie; - c->cookie = cookie; + cookie = dma_cookie_assign(tx); dev_dbg(to_dev(&ioat->base), "%s: cookie: %d\n", __func__, cookie); if (!test_and_set_bit(IOAT_COMPLETION_PENDING, &chan->state)) diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index f519c93..2c4476c 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -61,6 +61,7 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/prefetch.h> +#include "../dmaengine.h" #include "registers.h" #include "hw.h" #include "dma.h" @@ -277,9 +278,8 @@ static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) dump_desc_dbg(ioat, desc); tx = &desc->txd; if (tx->cookie) { - chan->completed_cookie = tx->cookie; + dma_cookie_complete(tx); ioat3_dma_unmap(ioat, desc, idx + i); - tx->cookie = 0; if (tx->callback) { tx->callback(tx->callback_param); tx->callback = NULL; @@ -411,13 +411,15 @@ ioat3_tx_status(struct dma_chan *c, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct ioat2_dma_chan *ioat = to_ioat2_chan(c); + enum dma_status ret; - if (ioat_tx_status(c, cookie, txstate) == DMA_SUCCESS) - return DMA_SUCCESS; + ret = dma_cookie_status(c, cookie, txstate); + if (ret == DMA_SUCCESS) + return ret; ioat3_cleanup(ioat); - return ioat_tx_status(c, cookie, txstate); + return dma_cookie_status(c, cookie, txstate); } static struct dma_async_tx_descriptor * diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index faf88b7..da6c4c2 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -36,6 +36,8 @@ #include <mach/adma.h> +#include "dmaengine.h" + #define to_iop_adma_chan(chan) container_of(chan, struct iop_adma_chan, common) #define to_iop_adma_device(dev) \ container_of(dev, struct iop_adma_device, common) @@ -317,7 +319,7 @@ static void __iop_adma_slot_cleanup(struct iop_adma_chan *iop_chan) } if (cookie > 0) { - iop_chan->completed_cookie = cookie; + iop_chan->common.completed_cookie = cookie; pr_debug("\tcompleted cookie %d\n", cookie); } } @@ -438,18 +440,6 @@ retry: return NULL; } -static dma_cookie_t -iop_desc_assign_cookie(struct iop_adma_chan *iop_chan, - struct iop_adma_desc_slot *desc) -{ - dma_cookie_t cookie = iop_chan->common.cookie; - cookie++; - if (cookie < 0) - cookie = 1; - iop_chan->common.cookie = desc->async_tx.cookie = cookie; - return cookie; -} - static void iop_adma_check_threshold(struct iop_adma_chan *iop_chan) { dev_dbg(iop_chan->device->common.dev, "pending: %d\n", @@ -477,7 +467,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) slots_per_op = grp_start->slots_per_op; spin_lock_bh(&iop_chan->lock); - cookie = iop_desc_assign_cookie(iop_chan, sw_desc); + cookie = dma_cookie_assign(tx); old_chain_tail = list_entry(iop_chan->chain.prev, struct iop_adma_desc_slot, chain_node); @@ -904,24 +894,15 @@ static enum dma_status iop_adma_status(struct dma_chan *chan, struct dma_tx_state *txstate) { struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; - enum dma_status ret; - - last_used = chan->cookie; - last_complete = iop_chan->completed_cookie; - dma_set_tx_state(txstate, last_complete, last_used, 0); - ret = dma_async_is_complete(cookie, last_complete, last_used); + int ret; + + ret = dma_cookie_status(chan, cookie, txstate); if (ret == DMA_SUCCESS) return ret; iop_adma_slot_cleanup(iop_chan); - last_used = chan->cookie; - last_complete = iop_chan->completed_cookie; - dma_set_tx_state(txstate, last_complete, last_used, 0); - - return dma_async_is_complete(cookie, last_complete, last_used); + return dma_cookie_status(chan, cookie, txstate); } static irqreturn_t iop_adma_eot_handler(int irq, void *data) @@ -1565,6 +1546,7 @@ static int __devinit iop_adma_probe(struct platform_device *pdev) INIT_LIST_HEAD(&iop_chan->chain); INIT_LIST_HEAD(&iop_chan->all_slots); iop_chan->common.device = dma_dev; + dma_cookie_init(&iop_chan->common); list_add_tail(&iop_chan->common.device_node, &dma_dev->channels); if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) { @@ -1642,16 +1624,12 @@ static void iop_chan_start_null_memcpy(struct iop_adma_chan *iop_chan) iop_desc_set_dest_addr(grp_start, iop_chan, 0); iop_desc_set_memcpy_src_addr(grp_start, 0); - cookie = iop_chan->common.cookie; - cookie++; - if (cookie <= 1) - cookie = 2; + cookie = dma_cookie_assign(&sw_desc->async_tx); /* initialize the completed cookie to be less than * the most recently used cookie */ - iop_chan->completed_cookie = cookie - 1; - iop_chan->common.cookie = sw_desc->async_tx.cookie = cookie; + iop_chan->common.completed_cookie = cookie - 1; /* channel should not be busy */ BUG_ON(iop_chan_is_busy(iop_chan)); @@ -1699,16 +1677,12 @@ static void iop_chan_start_null_xor(struct iop_adma_chan *iop_chan) iop_desc_set_xor_src_addr(grp_start, 0, 0); iop_desc_set_xor_src_addr(grp_start, 1, 0); - cookie = iop_chan->common.cookie; - cookie++; - if (cookie <= 1) - cookie = 2; + cookie = dma_cookie_assign(&sw_desc->async_tx); /* initialize the completed cookie to be less than * the most recently used cookie */ - iop_chan->completed_cookie = cookie - 1; - iop_chan->common.cookie = sw_desc->async_tx.cookie = cookie; + iop_chan->common.completed_cookie = cookie - 1; /* channel should not be busy */ BUG_ON(iop_chan_is_busy(iop_chan)); diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 6212b16..62e3f8e 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -25,6 +25,7 @@ #include <mach/ipu.h> +#include "../dmaengine.h" #include "ipu_intern.h" #define FS_VF_IN_VALID 0x00000002 @@ -866,14 +867,7 @@ static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx) dev_dbg(dev, "Submitting sg %p\n", &desc->sg[0]); - cookie = ichan->dma_chan.cookie; - - if (++cookie < 0) - cookie = 1; - - /* from dmaengine.h: "last cookie value returned to client" */ - ichan->dma_chan.cookie = cookie; - tx->cookie = cookie; + cookie = dma_cookie_assign(tx); /* ipu->lock can be taken under ichan->lock, but not v.v. */ spin_lock_irqsave(&ichan->lock, flags); @@ -1295,7 +1289,7 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id) /* Flip the active buffer - even if update above failed */ ichan->active_buffer = !ichan->active_buffer; if (done) - ichan->completed = desc->txd.cookie; + dma_cookie_complete(&desc->txd); callback = desc->txd.callback; callback_param = desc->txd.callback_param; @@ -1341,7 +1335,8 @@ static void ipu_gc_tasklet(unsigned long arg) /* Allocate and initialise a transfer descriptor. */ static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long tx_flags) + enum dma_transfer_direction direction, unsigned long tx_flags, + void *context) { struct idmac_channel *ichan = to_idmac_chan(chan); struct idmac_tx_desc *desc = NULL; @@ -1510,8 +1505,7 @@ static int idmac_alloc_chan_resources(struct dma_chan *chan) BUG_ON(chan->client_count > 1); WARN_ON(ichan->status != IPU_CHANNEL_FREE); - chan->cookie = 1; - ichan->completed = -ENXIO; + dma_cookie_init(chan); ret = ipu_irq_map(chan->chan_id); if (ret < 0) @@ -1600,9 +1594,7 @@ static void idmac_free_chan_resources(struct dma_chan *chan) static enum dma_status idmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - struct idmac_channel *ichan = to_idmac_chan(chan); - - dma_set_tx_state(txstate, ichan->completed, chan->cookie, 0); + dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie, 0); if (cookie != chan->cookie) return DMA_ERROR; return DMA_SUCCESS; @@ -1638,11 +1630,10 @@ static int __init ipu_idmac_init(struct ipu *ipu) ichan->status = IPU_CHANNEL_FREE; ichan->sec_chan_en = false; - ichan->completed = -ENXIO; snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i); dma_chan->device = &idmac->dma; - dma_chan->cookie = 1; + dma_cookie_init(dma_chan); dma_chan->chan_id = i; list_add_tail(&dma_chan->device_node, &dma->channels); } diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 4d6d4cf..2ab0a3d 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -44,6 +44,8 @@ #include <linux/random.h> +#include "dmaengine.h" + /* Number of DMA Transfer descriptors allocated per channel */ #define MPC_DMA_DESCRIPTORS 64 @@ -188,7 +190,6 @@ struct mpc_dma_chan { struct list_head completed; struct mpc_dma_tcd *tcd; dma_addr_t tcd_paddr; - dma_cookie_t completed_cookie; /* Lock for this structure */ spinlock_t lock; @@ -365,7 +366,7 @@ static void mpc_dma_process_completed(struct mpc_dma *mdma) /* Free descriptors */ spin_lock_irqsave(&mchan->lock, flags); list_splice_tail_init(&list, &mchan->free); - mchan->completed_cookie = last_cookie; + mchan->chan.completed_cookie = last_cookie; spin_unlock_irqrestore(&mchan->lock, flags); } } @@ -438,13 +439,7 @@ static dma_cookie_t mpc_dma_tx_submit(struct dma_async_tx_descriptor *txd) mpc_dma_execute(mchan); /* Update cookie */ - cookie = mchan->chan.cookie + 1; - if (cookie <= 0) - cookie = 1; - - mchan->chan.cookie = cookie; - mdesc->desc.cookie = cookie; - + cookie = dma_cookie_assign(txd); spin_unlock_irqrestore(&mchan->lock, flags); return cookie; @@ -562,17 +557,14 @@ mpc_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct mpc_dma_chan *mchan = dma_chan_to_mpc_dma_chan(chan); + enum dma_status ret; unsigned long flags; - dma_cookie_t last_used; - dma_cookie_t last_complete; spin_lock_irqsave(&mchan->lock, flags); - last_used = mchan->chan.cookie; - last_complete = mchan->completed_cookie; + ret = dma_cookie_status(chan, cookie, txstate); spin_unlock_irqrestore(&mchan->lock, flags); - dma_set_tx_state(txstate, last_complete, last_used, 0); - return dma_async_is_complete(cookie, last_complete, last_used); + return ret; } /* Prepare descriptor for memory to memory copy */ @@ -741,8 +733,7 @@ static int __devinit mpc_dma_probe(struct platform_device *op) mchan = &mdma->channels[i]; mchan->chan.device = dma; - mchan->chan.cookie = 1; - mchan->completed_cookie = mchan->chan.cookie; + dma_cookie_init(&mchan->chan); INIT_LIST_HEAD(&mchan->free); INIT_LIST_HEAD(&mchan->prepared); diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index e779b43..fa5d55f 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -26,6 +26,8 @@ #include <linux/platform_device.h> #include <linux/memory.h> #include <plat/mv_xor.h> + +#include "dmaengine.h" #include "mv_xor.h" static void mv_xor_issue_pending(struct dma_chan *chan); @@ -435,7 +437,7 @@ static void __mv_xor_slot_cleanup(struct mv_xor_chan *mv_chan) } if (cookie > 0) - mv_chan->completed_cookie = cookie; + mv_chan->common.completed_cookie = cookie; } static void @@ -534,18 +536,6 @@ retry: return NULL; } -static dma_cookie_t -mv_desc_assign_cookie(struct mv_xor_chan *mv_chan, - struct mv_xor_desc_slot *desc) -{ - dma_cookie_t cookie = mv_chan->common.cookie; - - if (++cookie < 0) - cookie = 1; - mv_chan->common.cookie = desc->async_tx.cookie = cookie; - return cookie; -} - /************************ DMA engine API functions ****************************/ static dma_cookie_t mv_xor_tx_submit(struct dma_async_tx_descriptor *tx) @@ -563,7 +553,7 @@ mv_xor_tx_submit(struct dma_async_tx_descriptor *tx) grp_start = sw_desc->group_head; spin_lock_bh(&mv_chan->lock); - cookie = mv_desc_assign_cookie(mv_chan, sw_desc); + cookie = dma_cookie_assign(tx); if (list_empty(&mv_chan->chain)) list_splice_init(&sw_desc->tx_list, &mv_chan->chain); @@ -820,27 +810,16 @@ static enum dma_status mv_xor_status(struct dma_chan *chan, struct dma_tx_state *txstate) { struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; enum dma_status ret; - last_used = chan->cookie; - last_complete = mv_chan->completed_cookie; - mv_chan->is_complete_cookie = cookie; - dma_set_tx_state(txstate, last_complete, last_used, 0); - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); if (ret == DMA_SUCCESS) { mv_xor_clean_completed_slots(mv_chan); return ret; } mv_xor_slot_cleanup(mv_chan); - last_used = chan->cookie; - last_complete = mv_chan->completed_cookie; - - dma_set_tx_state(txstate, last_complete, last_used, 0); - return dma_async_is_complete(cookie, last_complete, last_used); + return dma_cookie_status(chan, cookie, txstate); } static void mv_dump_xor_regs(struct mv_xor_chan *chan) @@ -1214,6 +1193,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev) INIT_LIST_HEAD(&mv_chan->completed_slots); INIT_LIST_HEAD(&mv_chan->all_slots); mv_chan->common.device = dma_dev; + dma_cookie_init(&mv_chan->common); list_add_tail(&mv_chan->common.device_node, &dma_dev->channels); diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h index 977b592..654876b 100644 --- a/drivers/dma/mv_xor.h +++ b/drivers/dma/mv_xor.h @@ -78,7 +78,6 @@ struct mv_xor_device { /** * struct mv_xor_chan - internal representation of a XOR channel * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation * @lock: serializes enqueue/dequeue operations to the descriptors pool * @mmr_base: memory mapped register base * @idx: the index of the xor channel @@ -93,7 +92,6 @@ struct mv_xor_device { */ struct mv_xor_chan { int pending; - dma_cookie_t completed_cookie; spinlock_t lock; /* protects the descriptor slot pool */ void __iomem *mmr_base; unsigned int idx; @@ -109,7 +107,6 @@ struct mv_xor_chan { #ifdef USE_TIMER unsigned long cleanup_time; u32 current_on_last_cleanup; - dma_cookie_t is_complete_cookie; #endif }; diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index b06cd4c..c81ef7e 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -22,12 +22,14 @@ #include <linux/platform_device.h> #include <linux/dmaengine.h> #include <linux/delay.h> +#include <linux/fsl/mxs-dma.h> #include <asm/irq.h> #include <mach/mxs.h> -#include <mach/dma.h> #include <mach/common.h> +#include "dmaengine.h" + /* * NOTE: The term "PIO" throughout the mxs-dma implementation means * PIO mode of mxs apbh-dma and apbx-dma. With this working mode, @@ -111,7 +113,6 @@ struct mxs_dma_chan { struct mxs_dma_ccw *ccw; dma_addr_t ccw_phys; int desc_count; - dma_cookie_t last_completed; enum dma_status status; unsigned int flags; #define MXS_DMA_SG_LOOP (1 << 0) @@ -193,19 +194,6 @@ static void mxs_dma_resume_chan(struct mxs_dma_chan *mxs_chan) mxs_chan->status = DMA_IN_PROGRESS; } -static dma_cookie_t mxs_dma_assign_cookie(struct mxs_dma_chan *mxs_chan) -{ - dma_cookie_t cookie = mxs_chan->chan.cookie; - - if (++cookie < 0) - cookie = 1; - - mxs_chan->chan.cookie = cookie; - mxs_chan->desc.cookie = cookie; - - return cookie; -} - static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan) { return container_of(chan, struct mxs_dma_chan, chan); @@ -217,7 +205,7 @@ static dma_cookie_t mxs_dma_tx_submit(struct dma_async_tx_descriptor *tx) mxs_dma_enable_chan(mxs_chan); - return mxs_dma_assign_cookie(mxs_chan); + return dma_cookie_assign(tx); } static void mxs_dma_tasklet(unsigned long data) @@ -274,7 +262,7 @@ static irqreturn_t mxs_dma_int_handler(int irq, void *dev_id) stat1 &= ~(1 << channel); if (mxs_chan->status == DMA_SUCCESS) - mxs_chan->last_completed = mxs_chan->desc.cookie; + dma_cookie_complete(&mxs_chan->desc); /* schedule tasklet on this channel */ tasklet_schedule(&mxs_chan->tasklet); @@ -349,10 +337,32 @@ static void mxs_dma_free_chan_resources(struct dma_chan *chan) clk_disable_unprepare(mxs_dma->clk); } +/* + * How to use the flags for ->device_prep_slave_sg() : + * [1] If there is only one DMA command in the DMA chain, the code should be: + * ...... + * ->device_prep_slave_sg(DMA_CTRL_ACK); + * ...... + * [2] If there are two DMA commands in the DMA chain, the code should be + * ...... + * ->device_prep_slave_sg(0); + * ...... + * ->device_prep_slave_sg(DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + * ...... + * [3] If there are more than two DMA commands in the DMA chain, the code + * should be: + * ...... + * ->device_prep_slave_sg(0); // First + * ...... + * ->device_prep_slave_sg(DMA_PREP_INTERRUPT [| DMA_CTRL_ACK]); + * ...... + * ->device_prep_slave_sg(DMA_PREP_INTERRUPT | DMA_CTRL_ACK); // Last + * ...... + */ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long append) + unsigned long flags, void *context) { struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; @@ -360,6 +370,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( struct scatterlist *sg; int i, j; u32 *pio; + bool append = flags & DMA_PREP_INTERRUPT; int idx = append ? mxs_chan->desc_count : 0; if (mxs_chan->status == DMA_IN_PROGRESS && !append) @@ -386,7 +397,6 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits |= CCW_CHAIN; ccw->bits &= ~CCW_IRQ; ccw->bits &= ~CCW_DEC_SEM; - ccw->bits &= ~CCW_WAIT4END; } else { idx = 0; } @@ -401,7 +411,8 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits = 0; ccw->bits |= CCW_IRQ; ccw->bits |= CCW_DEC_SEM; - ccw->bits |= CCW_WAIT4END; + if (flags & DMA_CTRL_ACK) + ccw->bits |= CCW_WAIT4END; ccw->bits |= CCW_HALT_ON_TERM; ccw->bits |= CCW_TERM_FLUSH; ccw->bits |= BF_CCW(sg_len, PIO_NUM); @@ -432,7 +443,8 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( ccw->bits &= ~CCW_CHAIN; ccw->bits |= CCW_IRQ; ccw->bits |= CCW_DEC_SEM; - ccw->bits |= CCW_WAIT4END; + if (flags & DMA_CTRL_ACK) + ccw->bits |= CCW_WAIT4END; } } } @@ -447,7 +459,8 @@ err_out: static struct dma_async_tx_descriptor *mxs_dma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; @@ -538,7 +551,7 @@ static enum dma_status mxs_dma_tx_status(struct dma_chan *chan, dma_cookie_t last_used; last_used = chan->cookie; - dma_set_tx_state(txstate, mxs_chan->last_completed, last_used, 0); + dma_set_tx_state(txstate, chan->completed_cookie, last_used, 0); return mxs_chan->status; } @@ -630,6 +643,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev) mxs_chan->mxs_dma = mxs_dma; mxs_chan->chan.device = &mxs_dma->dma_device; + dma_cookie_init(&mxs_chan->chan); tasklet_init(&mxs_chan->tasklet, mxs_dma_tasklet, (unsigned long) mxs_chan); diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 823f581..65c0495 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -25,6 +25,8 @@ #include <linux/module.h> #include <linux/pch_dma.h> +#include "dmaengine.h" + #define DRV_NAME "pch-dma" #define DMA_CTL0_DISABLE 0x0 @@ -105,7 +107,6 @@ struct pch_dma_chan { spinlock_t lock; - dma_cookie_t completed_cookie; struct list_head active_list; struct list_head queue; struct list_head free_list; @@ -416,20 +417,6 @@ static void pdc_advance_work(struct pch_dma_chan *pd_chan) } } -static dma_cookie_t pdc_assign_cookie(struct pch_dma_chan *pd_chan, - struct pch_dma_desc *desc) -{ - dma_cookie_t cookie = pd_chan->chan.cookie; - - if (++cookie < 0) - cookie = 1; - - pd_chan->chan.cookie = cookie; - desc->txd.cookie = cookie; - - return cookie; -} - static dma_cookie_t pd_tx_submit(struct dma_async_tx_descriptor *txd) { struct pch_dma_desc *desc = to_pd_desc(txd); @@ -437,7 +424,7 @@ static dma_cookie_t pd_tx_submit(struct dma_async_tx_descriptor *txd) dma_cookie_t cookie; spin_lock(&pd_chan->lock); - cookie = pdc_assign_cookie(pd_chan, desc); + cookie = dma_cookie_assign(txd); if (list_empty(&pd_chan->active_list)) { list_add_tail(&desc->desc_node, &pd_chan->active_list); @@ -544,7 +531,7 @@ static int pd_alloc_chan_resources(struct dma_chan *chan) spin_lock_irq(&pd_chan->lock); list_splice(&tmp_list, &pd_chan->free_list); pd_chan->descs_allocated = i; - pd_chan->completed_cookie = chan->cookie = 1; + dma_cookie_init(chan); spin_unlock_irq(&pd_chan->lock); pdc_enable_irq(chan, 1); @@ -578,19 +565,12 @@ static enum dma_status pd_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct pch_dma_chan *pd_chan = to_pd_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_completed; - int ret; + enum dma_status ret; spin_lock_irq(&pd_chan->lock); - last_completed = pd_chan->completed_cookie; - last_used = chan->cookie; + ret = dma_cookie_status(chan, cookie, txstate); spin_unlock_irq(&pd_chan->lock); - ret = dma_async_is_complete(cookie, last_completed, last_used); - - dma_set_tx_state(txstate, last_completed, last_used, 0); - return ret; } @@ -607,7 +587,8 @@ static void pd_issue_pending(struct dma_chan *chan) static struct dma_async_tx_descriptor *pd_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, + void *context) { struct pch_dma_chan *pd_chan = to_pd_chan(chan); struct pch_dma_slave *pd_slave = chan->private; @@ -932,7 +913,7 @@ static int __devinit pch_dma_probe(struct pci_dev *pdev, struct pch_dma_chan *pd_chan = &pd->channels[i]; pd_chan->chan.device = &pd->dma; - pd_chan->chan.cookie = 1; + dma_cookie_init(&pd_chan->chan); pd_chan->membase = ®s->desc[i]; diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 16b66c8..282caf1 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -1,4 +1,6 @@ -/* linux/drivers/dma/pl330.c +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> @@ -9,10 +11,15 @@ * (at your option) any later version. */ +#include <linux/kernel.h> #include <linux/io.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/interrupt.h> #include <linux/amba/bus.h> @@ -21,8 +28,497 @@ #include <linux/scatterlist.h> #include <linux/of.h> +#include "dmaengine.h" +#define PL330_MAX_CHAN 8 +#define PL330_MAX_IRQS 32 +#define PL330_MAX_PERI 32 + +enum pl330_srccachectrl { + SCCTRL0, /* Noncacheable and nonbufferable */ + SCCTRL1, /* Bufferable only */ + SCCTRL2, /* Cacheable, but do not allocate */ + SCCTRL3, /* Cacheable and bufferable, but do not allocate */ + SINVALID1, + SINVALID2, + SCCTRL6, /* Cacheable write-through, allocate on reads only */ + SCCTRL7, /* Cacheable write-back, allocate on reads only */ +}; + +enum pl330_dstcachectrl { + DCCTRL0, /* Noncacheable and nonbufferable */ + DCCTRL1, /* Bufferable only */ + DCCTRL2, /* Cacheable, but do not allocate */ + DCCTRL3, /* Cacheable and bufferable, but do not allocate */ + DINVALID1, /* AWCACHE = 0x1000 */ + DINVALID2, + DCCTRL6, /* Cacheable write-through, allocate on writes only */ + DCCTRL7, /* Cacheable write-back, allocate on writes only */ +}; + +enum pl330_byteswap { + SWAP_NO, + SWAP_2, + SWAP_4, + SWAP_8, + SWAP_16, +}; + +enum pl330_reqtype { + MEMTOMEM, + MEMTODEV, + DEVTOMEM, + DEVTODEV, +}; + +/* Register and Bit field Definitions */ +#define DS 0x0 +#define DS_ST_STOP 0x0 +#define DS_ST_EXEC 0x1 +#define DS_ST_CMISS 0x2 +#define DS_ST_UPDTPC 0x3 +#define DS_ST_WFE 0x4 +#define DS_ST_ATBRR 0x5 +#define DS_ST_QBUSY 0x6 +#define DS_ST_WFP 0x7 +#define DS_ST_KILL 0x8 +#define DS_ST_CMPLT 0x9 +#define DS_ST_FLTCMP 0xe +#define DS_ST_FAULT 0xf + +#define DPC 0x4 +#define INTEN 0x20 +#define ES 0x24 +#define INTSTATUS 0x28 +#define INTCLR 0x2c +#define FSM 0x30 +#define FSC 0x34 +#define FTM 0x38 + +#define _FTC 0x40 +#define FTC(n) (_FTC + (n)*0x4) + +#define _CS 0x100 +#define CS(n) (_CS + (n)*0x8) +#define CS_CNS (1 << 21) + +#define _CPC 0x104 +#define CPC(n) (_CPC + (n)*0x8) + +#define _SA 0x400 +#define SA(n) (_SA + (n)*0x20) + +#define _DA 0x404 +#define DA(n) (_DA + (n)*0x20) + +#define _CC 0x408 +#define CC(n) (_CC + (n)*0x20) + +#define CC_SRCINC (1 << 0) +#define CC_DSTINC (1 << 14) +#define CC_SRCPRI (1 << 8) +#define CC_DSTPRI (1 << 22) +#define CC_SRCNS (1 << 9) +#define CC_DSTNS (1 << 23) +#define CC_SRCIA (1 << 10) +#define CC_DSTIA (1 << 24) +#define CC_SRCBRSTLEN_SHFT 4 +#define CC_DSTBRSTLEN_SHFT 18 +#define CC_SRCBRSTSIZE_SHFT 1 +#define CC_DSTBRSTSIZE_SHFT 15 +#define CC_SRCCCTRL_SHFT 11 +#define CC_SRCCCTRL_MASK 0x7 +#define CC_DSTCCTRL_SHFT 25 +#define CC_DRCCCTRL_MASK 0x7 +#define CC_SWAP_SHFT 28 + +#define _LC0 0x40c +#define LC0(n) (_LC0 + (n)*0x20) + +#define _LC1 0x410 +#define LC1(n) (_LC1 + (n)*0x20) + +#define DBGSTATUS 0xd00 +#define DBG_BUSY (1 << 0) + +#define DBGCMD 0xd04 +#define DBGINST0 0xd08 +#define DBGINST1 0xd0c + +#define CR0 0xe00 +#define CR1 0xe04 +#define CR2 0xe08 +#define CR3 0xe0c +#define CR4 0xe10 +#define CRD 0xe14 + +#define PERIPH_ID 0xfe0 +#define PERIPH_REV_SHIFT 20 +#define PERIPH_REV_MASK 0xf +#define PERIPH_REV_R0P0 0 +#define PERIPH_REV_R1P0 1 +#define PERIPH_REV_R1P1 2 +#define PCELL_ID 0xff0 + +#define CR0_PERIPH_REQ_SET (1 << 0) +#define CR0_BOOT_EN_SET (1 << 1) +#define CR0_BOOT_MAN_NS (1 << 2) +#define CR0_NUM_CHANS_SHIFT 4 +#define CR0_NUM_CHANS_MASK 0x7 +#define CR0_NUM_PERIPH_SHIFT 12 +#define CR0_NUM_PERIPH_MASK 0x1f +#define CR0_NUM_EVENTS_SHIFT 17 +#define CR0_NUM_EVENTS_MASK 0x1f + +#define CR1_ICACHE_LEN_SHIFT 0 +#define CR1_ICACHE_LEN_MASK 0x7 +#define CR1_NUM_ICACHELINES_SHIFT 4 +#define CR1_NUM_ICACHELINES_MASK 0xf + +#define CRD_DATA_WIDTH_SHIFT 0 +#define CRD_DATA_WIDTH_MASK 0x7 +#define CRD_WR_CAP_SHIFT 4 +#define CRD_WR_CAP_MASK 0x7 +#define CRD_WR_Q_DEP_SHIFT 8 +#define CRD_WR_Q_DEP_MASK 0xf +#define CRD_RD_CAP_SHIFT 12 +#define CRD_RD_CAP_MASK 0x7 +#define CRD_RD_Q_DEP_SHIFT 16 +#define CRD_RD_Q_DEP_MASK 0xf +#define CRD_DATA_BUFF_SHIFT 20 +#define CRD_DATA_BUFF_MASK 0x3ff + +#define PART 0x330 +#define DESIGNER 0x41 +#define REVISION 0x0 +#define INTEG_CFG 0x0 +#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12)) + +#define PCELL_ID_VAL 0xb105f00d + +#define PL330_STATE_STOPPED (1 << 0) +#define PL330_STATE_EXECUTING (1 << 1) +#define PL330_STATE_WFE (1 << 2) +#define PL330_STATE_FAULTING (1 << 3) +#define PL330_STATE_COMPLETING (1 << 4) +#define PL330_STATE_WFP (1 << 5) +#define PL330_STATE_KILLING (1 << 6) +#define PL330_STATE_FAULT_COMPLETING (1 << 7) +#define PL330_STATE_CACHEMISS (1 << 8) +#define PL330_STATE_UPDTPC (1 << 9) +#define PL330_STATE_ATBARRIER (1 << 10) +#define PL330_STATE_QUEUEBUSY (1 << 11) +#define PL330_STATE_INVALID (1 << 15) + +#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ + | PL330_STATE_WFE | PL330_STATE_FAULTING) + +#define CMD_DMAADDH 0x54 +#define CMD_DMAEND 0x00 +#define CMD_DMAFLUSHP 0x35 +#define CMD_DMAGO 0xa0 +#define CMD_DMALD 0x04 +#define CMD_DMALDP 0x25 +#define CMD_DMALP 0x20 +#define CMD_DMALPEND 0x28 +#define CMD_DMAKILL 0x01 +#define CMD_DMAMOV 0xbc +#define CMD_DMANOP 0x18 +#define CMD_DMARMB 0x12 +#define CMD_DMASEV 0x34 +#define CMD_DMAST 0x08 +#define CMD_DMASTP 0x29 +#define CMD_DMASTZ 0x0c +#define CMD_DMAWFE 0x36 +#define CMD_DMAWFP 0x30 +#define CMD_DMAWMB 0x13 + +#define SZ_DMAADDH 3 +#define SZ_DMAEND 1 +#define SZ_DMAFLUSHP 2 +#define SZ_DMALD 1 +#define SZ_DMALDP 2 +#define SZ_DMALP 2 +#define SZ_DMALPEND 2 +#define SZ_DMAKILL 1 +#define SZ_DMAMOV 6 +#define SZ_DMANOP 1 +#define SZ_DMARMB 1 +#define SZ_DMASEV 2 +#define SZ_DMAST 1 +#define SZ_DMASTP 2 +#define SZ_DMASTZ 1 +#define SZ_DMAWFE 2 +#define SZ_DMAWFP 2 +#define SZ_DMAWMB 1 +#define SZ_DMAGO 6 + +#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) +#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) + +#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) +#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) + +/* + * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req + * at 1byte/burst for P<->M and M<->M respectively. + * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req + * should be enough for P<->M and M<->M respectively. + */ +#define MCODE_BUFF_PER_REQ 256 + +/* If the _pl330_req is available to the client */ +#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) + +/* Use this _only_ to wait on transient states */ +#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); + +#ifdef PL330_DEBUG_MCGEN +static unsigned cmd_line; +#define PL330_DBGCMD_DUMP(off, x...) do { \ + printk("%x:", cmd_line); \ + printk(x); \ + cmd_line += off; \ + } while (0) +#define PL330_DBGMC_START(addr) (cmd_line = addr) +#else +#define PL330_DBGCMD_DUMP(off, x...) do {} while (0) +#define PL330_DBGMC_START(addr) do {} while (0) +#endif + +/* The number of default descriptors */ + #define NR_DEFAULT_DESC 16 +/* Populated by the PL330 core driver for DMA API driver's info */ +struct pl330_config { + u32 periph_id; + u32 pcell_id; +#define DMAC_MODE_NS (1 << 0) + unsigned int mode; + unsigned int data_bus_width:10; /* In number of bits */ + unsigned int data_buf_dep:10; + unsigned int num_chan:4; + unsigned int num_peri:6; + u32 peri_ns; + unsigned int num_events:6; + u32 irq_ns; +}; + +/* Handle to the DMAC provided to the PL330 core */ +struct pl330_info { + /* Owning device */ + struct device *dev; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Client can freely use it. */ + void *client_data; + /* PL330 core data, Client must not touch it. */ + void *pl330_data; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + /* + * If the DMAC has some reset mechanism, then the + * client may want to provide pointer to the method. + */ + void (*dmac_reset)(struct pl330_info *pi); +}; + +/** + * Request Configuration. + * The PL330 core does not modify this and uses the last + * working configuration if the request doesn't provide any. + * + * The Client may want to provide this info only for the + * first request and a request with new settings. + */ +struct pl330_reqcfg { + /* Address Incrementing */ + unsigned dst_inc:1; + unsigned src_inc:1; + + /* + * For now, the SRC & DST protection levels + * and burst size/length are assumed same. + */ + bool nonsecure; + bool privileged; + bool insnaccess; + unsigned brst_len:5; + unsigned brst_size:3; /* in power of 2 */ + + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + enum pl330_byteswap swap; + struct pl330_config *pcfg; +}; + +/* + * One cycle of DMAC operation. + * There may be more than one xfer in a request. + */ +struct pl330_xfer { + u32 src_addr; + u32 dst_addr; + /* Size to xfer */ + u32 bytes; + /* + * Pointer to next xfer in the list. + * The last xfer in the req must point to NULL. + */ + struct pl330_xfer *next; +}; + +/* The xfer callbacks are made with one of these arguments. */ +enum pl330_op_err { + /* The all xfers in the request were success. */ + PL330_ERR_NONE, + /* If req aborted due to global error. */ + PL330_ERR_ABORT, + /* If req failed due to problem with Channel. */ + PL330_ERR_FAIL, +}; + +/* A request defining Scatter-Gather List ending with NULL xfer. */ +struct pl330_req { + enum pl330_reqtype rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Unique token for this xfer, set by the client. */ + void *token; + /* Callback to be called after xfer. */ + void (*xfer_cb)(void *token, enum pl330_op_err err); + /* If NULL, req will be done at last set parameters. */ + struct pl330_reqcfg *cfg; + /* Pointer to first xfer in the request. */ + struct pl330_xfer *x; +}; + +/* + * To know the status of the channel and DMAC, the client + * provides a pointer to this structure. The PL330 core + * fills it with current information. + */ +struct pl330_chanstatus { + /* + * If the DMAC engine halted due to some error, + * the client should remove-add DMAC. + */ + bool dmac_halted; + /* + * If channel is halted due to some error, + * the client should ABORT/FLUSH and START the channel. + */ + bool faulting; + /* Location of last load */ + u32 src_addr; + /* Location of last store */ + u32 dst_addr; + /* + * Pointer to the currently active req, NULL if channel is + * inactive, even though the requests may be present. + */ + struct pl330_req *top_req; + /* Pointer to req waiting second in the queue if any. */ + struct pl330_req *wait_req; +}; + +enum pl330_chan_op { + /* Start the channel */ + PL330_OP_START, + /* Abort the active xfer */ + PL330_OP_ABORT, + /* Stop xfer and flush queue */ + PL330_OP_FLUSH, +}; + +struct _xfer_spec { + u32 ccr; + struct pl330_req *r; + struct pl330_xfer *x; +}; + +enum dmamov_dst { + SAR = 0, + CCR, + DAR, +}; + +enum pl330_dst { + SRC = 0, + DST, +}; + +enum pl330_cond { + SINGLE, + BURST, + ALWAYS, +}; + +struct _pl330_req { + u32 mc_bus; + void *mc_cpu; + /* Number of bytes taken to setup MC for the req */ + u32 mc_len; + struct pl330_req *r; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; +}; + +/* ToBeDone for tasklet */ +struct _pl330_tbd { + bool reset_dmac; + bool reset_mngr; + u8 reset_chan; +}; + +/* A DMAC Thread */ +struct pl330_thread { + u8 id; + int ev; + /* If the channel is not yet acquired by any client */ + bool free; + /* Parent DMAC */ + struct pl330_dmac *dmac; + /* Only two at a time */ + struct _pl330_req req[2]; + /* Index of the last enqueued request */ + unsigned lstenq; + /* Index of the last submitted request or -1 if the DMA is stopped */ + int req_running; +}; + +enum pl330_dmac_state { + UNINIT, + INIT, + DYING, +}; + +/* A DMAC */ +struct pl330_dmac { + spinlock_t lock; + /* Holds list of reqs with due callbacks */ + struct list_head req_done; + /* Pointer to platform specific stuff */ + struct pl330_info *pinfo; + /* Maximum possible events/irqs */ + int events[32]; + /* BUS address of MicroCode buffer */ + u32 mcode_bus; + /* CPU address of MicroCode buffer */ + void *mcode_cpu; + /* List of all Channel threads */ + struct pl330_thread *channels; + /* Pointer to the MANAGER thread */ + struct pl330_thread *manager; + /* To handle bad news in interrupt */ + struct tasklet_struct tasks; + struct _pl330_tbd dmac_tbd; + /* State of DMAC operation */ + enum pl330_dmac_state state; +}; + enum desc_status { /* In the DMAC pool */ FREE, @@ -51,9 +547,6 @@ struct dma_pl330_chan { /* DMA-Engine Channel */ struct dma_chan chan; - /* Last completed cookie */ - dma_cookie_t completed; - /* List of to be xfered descriptors */ struct list_head work_list; @@ -117,6 +610,1599 @@ struct dma_pl330_desc { struct dma_pl330_chan *pchan; }; +static inline void _callback(struct pl330_req *r, enum pl330_op_err err) +{ + if (r && r->xfer_cb) + r->xfer_cb(r->token, err); +} + +static inline bool _queue_empty(struct pl330_thread *thrd) +{ + return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) + ? true : false; +} + +static inline bool _queue_full(struct pl330_thread *thrd) +{ + return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) + ? false : true; +} + +static inline bool is_manager(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + /* MANAGER is indexed at the end */ + if (thrd->id == pl330->pinfo->pcfg.num_chan) + return true; + else + return false; +} + +/* If manager of the thread is in Non-Secure mode */ +static inline bool _manager_ns(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; +} + +static inline u32 get_id(struct pl330_info *pi, u32 off) +{ + void __iomem *regs = pi->base; + u32 id = 0; + + id |= (readb(regs + off + 0x0) << 0); + id |= (readb(regs + off + 0x4) << 8); + id |= (readb(regs + off + 0x8) << 16); + id |= (readb(regs + off + 0xc) << 24); + + return id; +} + +static inline u32 get_revision(u32 periph_id) +{ + return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK; +} + +static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], + enum pl330_dst da, u16 val) +{ + if (dry_run) + return SZ_DMAADDH; + + buf[0] = CMD_DMAADDH; + buf[0] |= (da << 1); + *((u16 *)&buf[1]) = val; + + PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", + da == 1 ? "DA" : "SA", val); + + return SZ_DMAADDH; +} + +static inline u32 _emit_END(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAEND; + + buf[0] = CMD_DMAEND; + + PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); + + return SZ_DMAEND; +} + +static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) +{ + if (dry_run) + return SZ_DMAFLUSHP; + + buf[0] = CMD_DMAFLUSHP; + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); + + return SZ_DMAFLUSHP; +} + +static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMALD; + + buf[0] = CMD_DMALD; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMALD; +} + +static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMALDP; + + buf[0] = CMD_DMALDP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMALDP; +} + +static inline u32 _emit_LP(unsigned dry_run, u8 buf[], + unsigned loop, u8 cnt) +{ + if (dry_run) + return SZ_DMALP; + + buf[0] = CMD_DMALP; + + if (loop) + buf[0] |= (1 << 1); + + cnt--; /* DMAC increments by 1 internally */ + buf[1] = cnt; + + PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); + + return SZ_DMALP; +} + +struct _arg_LPEND { + enum pl330_cond cond; + bool forever; + unsigned loop; + u8 bjump; +}; + +static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], + const struct _arg_LPEND *arg) +{ + enum pl330_cond cond = arg->cond; + bool forever = arg->forever; + unsigned loop = arg->loop; + u8 bjump = arg->bjump; + + if (dry_run) + return SZ_DMALPEND; + + buf[0] = CMD_DMALPEND; + + if (loop) + buf[0] |= (1 << 2); + + if (!forever) + buf[0] |= (1 << 4); + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + buf[1] = bjump; + + PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", + forever ? "FE" : "END", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), + loop ? '1' : '0', + bjump); + + return SZ_DMALPEND; +} + +static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAKILL; + + buf[0] = CMD_DMAKILL; + + return SZ_DMAKILL; +} + +static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], + enum dmamov_dst dst, u32 val) +{ + if (dry_run) + return SZ_DMAMOV; + + buf[0] = CMD_DMAMOV; + buf[1] = dst; + *((u32 *)&buf[2]) = val; + + PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", + dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); + + return SZ_DMAMOV; +} + +static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMANOP; + + buf[0] = CMD_DMANOP; + + PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); + + return SZ_DMANOP; +} + +static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMARMB; + + buf[0] = CMD_DMARMB; + + PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); + + return SZ_DMARMB; +} + +static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) +{ + if (dry_run) + return SZ_DMASEV; + + buf[0] = CMD_DMASEV; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); + + return SZ_DMASEV; +} + +static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMAST; + + buf[0] = CMD_DMAST; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMAST; +} + +static inline u32 _emit_STP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMASTP; + + buf[0] = CMD_DMASTP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMASTP; +} + +static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMASTZ; + + buf[0] = CMD_DMASTZ; + + PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); + + return SZ_DMASTZ; +} + +static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, + unsigned invalidate) +{ + if (dry_run) + return SZ_DMAWFE; + + buf[0] = CMD_DMAWFE; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + if (invalidate) + buf[1] |= (1 << 1); + + PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", + ev >> 3, invalidate ? ", I" : ""); + + return SZ_DMAWFE; +} + +static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMAWFP; + + buf[0] = CMD_DMAWFP; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (0 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (0 << 0); + else + buf[0] |= (0 << 1) | (1 << 0); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); + + return SZ_DMAWFP; +} + +static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAWMB; + + buf[0] = CMD_DMAWMB; + + PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); + + return SZ_DMAWMB; +} + +struct _arg_GO { + u8 chan; + u32 addr; + unsigned ns; +}; + +static inline u32 _emit_GO(unsigned dry_run, u8 buf[], + const struct _arg_GO *arg) +{ + u8 chan = arg->chan; + u32 addr = arg->addr; + unsigned ns = arg->ns; + + if (dry_run) + return SZ_DMAGO; + + buf[0] = CMD_DMAGO; + buf[0] |= (ns << 1); + + buf[1] = chan & 0x7; + + *((u32 *)&buf[2]) = addr; + + return SZ_DMAGO; +} + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +/* Returns Time-Out */ +static bool _until_dmac_idle(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + unsigned long loops = msecs_to_loops(5); + + do { + /* Until Manager is Idle */ + if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) + break; + + cpu_relax(); + } while (--loops); + + if (!loops) + return true; + + return false; +} + +static inline void _execute_DBGINSN(struct pl330_thread *thrd, + u8 insn[], bool as_manager) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 val; + + val = (insn[0] << 16) | (insn[1] << 24); + if (!as_manager) { + val |= (1 << 0); + val |= (thrd->id << 8); /* Channel Number */ + } + writel(val, regs + DBGINST0); + + val = *((u32 *)&insn[2]); + writel(val, regs + DBGINST1); + + /* If timed out due to halted state-machine */ + if (_until_dmac_idle(thrd)) { + dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); + return; + } + + /* Get going */ + writel(0, regs + DBGCMD); +} + +/* + * Mark a _pl330_req as free. + * We do it by writing DMAEND as the first instruction + * because no valid request is going to have DMAEND as + * its first instruction to execute. + */ +static void mark_free(struct pl330_thread *thrd, int idx) +{ + struct _pl330_req *req = &thrd->req[idx]; + + _emit_END(0, req->mc_cpu); + req->mc_len = 0; + + thrd->req_running = -1; +} + +static inline u32 _state(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 val; + + if (is_manager(thrd)) + val = readl(regs + DS) & 0xf; + else + val = readl(regs + CS(thrd->id)) & 0xf; + + switch (val) { + case DS_ST_STOP: + return PL330_STATE_STOPPED; + case DS_ST_EXEC: + return PL330_STATE_EXECUTING; + case DS_ST_CMISS: + return PL330_STATE_CACHEMISS; + case DS_ST_UPDTPC: + return PL330_STATE_UPDTPC; + case DS_ST_WFE: + return PL330_STATE_WFE; + case DS_ST_FAULT: + return PL330_STATE_FAULTING; + case DS_ST_ATBRR: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_ATBARRIER; + case DS_ST_QBUSY: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_QUEUEBUSY; + case DS_ST_WFP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_WFP; + case DS_ST_KILL: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_KILLING; + case DS_ST_CMPLT: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_COMPLETING; + case DS_ST_FLTCMP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_FAULT_COMPLETING; + default: + return PL330_STATE_INVALID; + } +} + +static void _stop(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + + if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + /* Return if nothing needs to be done */ + if (_state(thrd) == PL330_STATE_COMPLETING + || _state(thrd) == PL330_STATE_KILLING + || _state(thrd) == PL330_STATE_STOPPED) + return; + + _emit_KILL(0, insn); + + /* Stop generating interrupts for SEV */ + writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); + + _execute_DBGINSN(thrd, insn, is_manager(thrd)); +} + +/* Start doing req 'idx' of thread 'thrd' */ +static bool _trigger(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + struct _pl330_req *req; + struct pl330_req *r; + struct _arg_GO go; + unsigned ns; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + int idx; + + /* Return if already ACTIVE */ + if (_state(thrd) != PL330_STATE_STOPPED) + return true; + + idx = 1 - thrd->lstenq; + if (!IS_FREE(&thrd->req[idx])) + req = &thrd->req[idx]; + else { + idx = thrd->lstenq; + if (!IS_FREE(&thrd->req[idx])) + req = &thrd->req[idx]; + else + req = NULL; + } + + /* Return if no request */ + if (!req || !req->r) + return true; + + r = req->r; + + if (r->cfg) + ns = r->cfg->nonsecure ? 1 : 0; + else if (readl(regs + CS(thrd->id)) & CS_CNS) + ns = 1; + else + ns = 0; + + /* See 'Abort Sources' point-4 at Page 2-25 */ + if (_manager_ns(thrd) && !ns) + dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", + __func__, __LINE__); + + go.chan = thrd->id; + go.addr = req->mc_bus; + go.ns = ns; + _emit_GO(0, insn, &go); + + /* Set to generate interrupts for SEV */ + writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); + + /* Only manager can execute GO */ + _execute_DBGINSN(thrd, insn, true); + + thrd->req_running = idx; + + return true; +} + +static bool _start(struct pl330_thread *thrd) +{ + switch (_state(thrd)) { + case PL330_STATE_FAULT_COMPLETING: + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + if (_state(thrd) == PL330_STATE_KILLING) + UNTIL(thrd, PL330_STATE_STOPPED) + + case PL330_STATE_FAULTING: + _stop(thrd); + + case PL330_STATE_KILLING: + case PL330_STATE_COMPLETING: + UNTIL(thrd, PL330_STATE_STOPPED) + + case PL330_STATE_STOPPED: + return _trigger(thrd); + + case PL330_STATE_WFP: + case PL330_STATE_QUEUEBUSY: + case PL330_STATE_ATBARRIER: + case PL330_STATE_UPDTPC: + case PL330_STATE_CACHEMISS: + case PL330_STATE_EXECUTING: + return true; + + case PL330_STATE_WFE: /* For RESUME, nothing yet */ + default: + return false; + } +} + +static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + struct pl330_config *pcfg = pxs->r->cfg->pcfg; + + /* check lock-up free version */ + if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) { + while (cyc--) { + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + } + } else { + while (cyc--) { + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_RMB(dry_run, &buf[off]); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_WMB(dry_run, &buf[off]); + } + } + + return off; +} + +static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + } + + return off; +} + +static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + } + + return off; +} + +static int _bursts(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + switch (pxs->r->rqtype) { + case MEMTODEV: + off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); + break; + case DEVTOMEM: + off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); + break; + case MEMTOMEM: + off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); + break; + default: + off += 0x40000000; /* Scare off the Client */ + break; + } + + return off; +} + +/* Returns bytes consumed and updates bursts */ +static inline int _loop(unsigned dry_run, u8 buf[], + unsigned long *bursts, const struct _xfer_spec *pxs) +{ + int cyc, cycmax, szlp, szlpend, szbrst, off; + unsigned lcnt0, lcnt1, ljmp0, ljmp1; + struct _arg_LPEND lpend; + + /* Max iterations possible in DMALP is 256 */ + if (*bursts >= 256*256) { + lcnt1 = 256; + lcnt0 = 256; + cyc = *bursts / lcnt1 / lcnt0; + } else if (*bursts > 256) { + lcnt1 = 256; + lcnt0 = *bursts / lcnt1; + cyc = 1; + } else { + lcnt1 = *bursts; + lcnt0 = 0; + cyc = 1; + } + + szlp = _emit_LP(1, buf, 0, 0); + szbrst = _bursts(1, buf, pxs, 1); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = 0; + szlpend = _emit_LPEND(1, buf, &lpend); + + if (lcnt0) { + szlp *= 2; + szlpend *= 2; + } + + /* + * Max bursts that we can unroll due to limit on the + * size of backward jump that can be encoded in DMALPEND + * which is 8-bits and hence 255 + */ + cycmax = (255 - (szlp + szlpend)) / szbrst; + + cyc = (cycmax < cyc) ? cycmax : cyc; + + off = 0; + + if (lcnt0) { + off += _emit_LP(dry_run, &buf[off], 0, lcnt0); + ljmp0 = off; + } + + off += _emit_LP(dry_run, &buf[off], 1, lcnt1); + ljmp1 = off; + + off += _bursts(dry_run, &buf[off], pxs, cyc); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 1; + lpend.bjump = off - ljmp1; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + + if (lcnt0) { + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = off - ljmp0; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + } + + *bursts = lcnt1 * cyc; + if (lcnt0) + *bursts *= lcnt0; + + return off; +} + +static inline int _setup_loops(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = pxs->x; + u32 ccr = pxs->ccr; + unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); + int off = 0; + + while (bursts) { + c = bursts; + off += _loop(dry_run, &buf[off], &c, pxs); + bursts -= c; + } + + return off; +} + +static inline int _setup_xfer(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = pxs->x; + int off = 0; + + /* DMAMOV SAR, x->src_addr */ + off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); + /* DMAMOV DAR, x->dst_addr */ + off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); + + /* Setup Loop(s) */ + off += _setup_loops(dry_run, &buf[off], pxs); + + return off; +} + +/* + * A req is a sequence of one or more xfer units. + * Returns the number of bytes taken to setup the MC for the req. + */ +static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, + unsigned index, struct _xfer_spec *pxs) +{ + struct _pl330_req *req = &thrd->req[index]; + struct pl330_xfer *x; + u8 *buf = req->mc_cpu; + int off = 0; + + PL330_DBGMC_START(req->mc_bus); + + /* DMAMOV CCR, ccr */ + off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); + + x = pxs->r->x; + do { + /* Error if xfer length is not aligned at burst size */ + if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) + return -EINVAL; + + pxs->x = x; + off += _setup_xfer(dry_run, &buf[off], pxs); + + x = x->next; + } while (x); + + /* DMASEV peripheral/event */ + off += _emit_SEV(dry_run, &buf[off], thrd->ev); + /* DMAEND */ + off += _emit_END(dry_run, &buf[off]); + + return off; +} + +static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) +{ + u32 ccr = 0; + + if (rqc->src_inc) + ccr |= CC_SRCINC; + + if (rqc->dst_inc) + ccr |= CC_DSTINC; + + /* We set same protection levels for Src and DST for now */ + if (rqc->privileged) + ccr |= CC_SRCPRI | CC_DSTPRI; + if (rqc->nonsecure) + ccr |= CC_SRCNS | CC_DSTNS; + if (rqc->insnaccess) + ccr |= CC_SRCIA | CC_DSTIA; + + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); + + ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); + ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); + + ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); + ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); + + ccr |= (rqc->swap << CC_SWAP_SHFT); + + return ccr; +} + +static inline bool _is_valid(u32 ccr) +{ + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + + dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; + scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; + + if (dcctl == DINVALID1 || dcctl == DINVALID2 + || scctl == SINVALID1 || scctl == SINVALID2) + return false; + else + return true; +} + +/* + * Submit a list of xfers after which the client wants notification. + * Client is not notified after each xfer unit, just once after all + * xfer units are done or some error occurs. + */ +static int pl330_submit_req(void *ch_id, struct pl330_req *r) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + struct pl330_info *pi; + struct _xfer_spec xs; + unsigned long flags; + void __iomem *regs; + unsigned idx; + u32 ccr; + int ret = 0; + + /* No Req or Unacquired Channel or DMAC */ + if (!r || !thrd || thrd->free) + return -EINVAL; + + pl330 = thrd->dmac; + pi = pl330->pinfo; + regs = pi->base; + + if (pl330->state == DYING + || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { + dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", + __func__, __LINE__); + return -EAGAIN; + } + + /* If request for non-existing peripheral */ + if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { + dev_info(thrd->dmac->pinfo->dev, + "%s:%d Invalid peripheral(%u)!\n", + __func__, __LINE__, r->peri); + return -EINVAL; + } + + spin_lock_irqsave(&pl330->lock, flags); + + if (_queue_full(thrd)) { + ret = -EAGAIN; + goto xfer_exit; + } + + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + r->cfg->nonsecure = 0; + else + r->cfg->nonsecure = 1; + + /* Use last settings, if not provided */ + if (r->cfg) + ccr = _prepare_ccr(r->cfg); + else + ccr = readl(regs + CC(thrd->id)); + + /* If this req doesn't have valid xfer settings */ + if (!_is_valid(ccr)) { + ret = -EINVAL; + dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", + __func__, __LINE__, ccr); + goto xfer_exit; + } + + idx = IS_FREE(&thrd->req[0]) ? 0 : 1; + + xs.ccr = ccr; + xs.r = r; + + /* First dry run to check if req is acceptable */ + ret = _setup_req(1, thrd, idx, &xs); + if (ret < 0) + goto xfer_exit; + + if (ret > pi->mcbufsz / 2) { + dev_info(thrd->dmac->pinfo->dev, + "%s:%d Trying increasing mcbufsz\n", + __func__, __LINE__); + ret = -ENOMEM; + goto xfer_exit; + } + + /* Hook the request */ + thrd->lstenq = idx; + thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); + thrd->req[idx].r = r; + + ret = 0; + +xfer_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + return ret; +} + +static void pl330_dotask(unsigned long data) +{ + struct pl330_dmac *pl330 = (struct pl330_dmac *) data; + struct pl330_info *pi = pl330->pinfo; + unsigned long flags; + int i; + + spin_lock_irqsave(&pl330->lock, flags); + + /* The DMAC itself gone nuts */ + if (pl330->dmac_tbd.reset_dmac) { + pl330->state = DYING; + /* Reset the manager too */ + pl330->dmac_tbd.reset_mngr = true; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_dmac = false; + } + + if (pl330->dmac_tbd.reset_mngr) { + _stop(pl330->manager); + /* Reset all channels */ + pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_mngr = false; + } + + for (i = 0; i < pi->pcfg.num_chan; i++) { + + if (pl330->dmac_tbd.reset_chan & (1 << i)) { + struct pl330_thread *thrd = &pl330->channels[i]; + void __iomem *regs = pi->base; + enum pl330_op_err err; + + _stop(thrd); + + if (readl(regs + FSC) & (1 << thrd->id)) + err = PL330_ERR_FAIL; + else + err = PL330_ERR_ABORT; + + spin_unlock_irqrestore(&pl330->lock, flags); + + _callback(thrd->req[1 - thrd->lstenq].r, err); + _callback(thrd->req[thrd->lstenq].r, err); + + spin_lock_irqsave(&pl330->lock, flags); + + thrd->req[0].r = NULL; + thrd->req[1].r = NULL; + mark_free(thrd, 0); + mark_free(thrd, 1); + + /* Clear the reset flag */ + pl330->dmac_tbd.reset_chan &= ~(1 << i); + } + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return; +} + +/* Returns 1 if state was updated, 0 otherwise */ +static int pl330_update(const struct pl330_info *pi) +{ + struct _pl330_req *rqdone; + struct pl330_dmac *pl330; + unsigned long flags; + void __iomem *regs; + u32 val; + int id, ev, ret = 0; + + if (!pi || !pi->pl330_data) + return 0; + + regs = pi->base; + pl330 = pi->pl330_data; + + spin_lock_irqsave(&pl330->lock, flags); + + val = readl(regs + FSM) & 0x1; + if (val) + pl330->dmac_tbd.reset_mngr = true; + else + pl330->dmac_tbd.reset_mngr = false; + + val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); + pl330->dmac_tbd.reset_chan |= val; + if (val) { + int i = 0; + while (i < pi->pcfg.num_chan) { + if (val & (1 << i)) { + dev_info(pi->dev, + "Reset Channel-%d\t CS-%x FTC-%x\n", + i, readl(regs + CS(i)), + readl(regs + FTC(i))); + _stop(&pl330->channels[i]); + } + i++; + } + } + + /* Check which event happened i.e, thread notified */ + val = readl(regs + ES); + if (pi->pcfg.num_events < 32 + && val & ~((1 << pi->pcfg.num_events) - 1)) { + pl330->dmac_tbd.reset_dmac = true; + dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); + ret = 1; + goto updt_exit; + } + + for (ev = 0; ev < pi->pcfg.num_events; ev++) { + if (val & (1 << ev)) { /* Event occurred */ + struct pl330_thread *thrd; + u32 inten = readl(regs + INTEN); + int active; + + /* Clear the event */ + if (inten & (1 << ev)) + writel(1 << ev, regs + INTCLR); + + ret = 1; + + id = pl330->events[ev]; + + thrd = &pl330->channels[id]; + + active = thrd->req_running; + if (active == -1) /* Aborted */ + continue; + + rqdone = &thrd->req[active]; + mark_free(thrd, active); + + /* Get going again ASAP */ + _start(thrd); + + /* For now, just make a list of callbacks to be done */ + list_add_tail(&rqdone->rqd, &pl330->req_done); + } + } + + /* Now that we are in no hurry, do the callbacks */ + while (!list_empty(&pl330->req_done)) { + struct pl330_req *r; + + rqdone = container_of(pl330->req_done.next, + struct _pl330_req, rqd); + + list_del_init(&rqdone->rqd); + + /* Detach the req */ + r = rqdone->r; + rqdone->r = NULL; + + spin_unlock_irqrestore(&pl330->lock, flags); + _callback(r, PL330_ERR_NONE); + spin_lock_irqsave(&pl330->lock, flags); + } + +updt_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + if (pl330->dmac_tbd.reset_dmac + || pl330->dmac_tbd.reset_mngr + || pl330->dmac_tbd.reset_chan) { + ret = 1; + tasklet_schedule(&pl330->tasks); + } + + return ret; +} + +static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + unsigned long flags; + int ret = 0, active; + + if (!thrd || thrd->free || thrd->dmac->state == DYING) + return -EINVAL; + + pl330 = thrd->dmac; + active = thrd->req_running; + + spin_lock_irqsave(&pl330->lock, flags); + + switch (op) { + case PL330_OP_FLUSH: + /* Make sure the channel is stopped */ + _stop(thrd); + + thrd->req[0].r = NULL; + thrd->req[1].r = NULL; + mark_free(thrd, 0); + mark_free(thrd, 1); + break; + + case PL330_OP_ABORT: + /* Make sure the channel is stopped */ + _stop(thrd); + + /* ABORT is only for the active req */ + if (active == -1) + break; + + thrd->req[active].r = NULL; + mark_free(thrd, active); + + /* Start the next */ + case PL330_OP_START: + if ((active == -1) && !_start(thrd)) + ret = -EIO; + break; + + default: + ret = -EINVAL; + } + + spin_unlock_irqrestore(&pl330->lock, flags); + return ret; +} + +/* Reserve an event */ +static inline int _alloc_event(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + int ev; + + for (ev = 0; ev < pi->pcfg.num_events; ev++) + if (pl330->events[ev] == -1) { + pl330->events[ev] = thrd->id; + return ev; + } + + return -1; +} + +static bool _chan_ns(const struct pl330_info *pi, int i) +{ + return pi->pcfg.irq_ns & (1 << i); +} + +/* Upon success, returns IdentityToken for the + * allocated channel, NULL otherwise. + */ +static void *pl330_request_channel(const struct pl330_info *pi) +{ + struct pl330_thread *thrd = NULL; + struct pl330_dmac *pl330; + unsigned long flags; + int chans, i; + + if (!pi || !pi->pl330_data) + return NULL; + + pl330 = pi->pl330_data; + + if (pl330->state == DYING) + return NULL; + + chans = pi->pcfg.num_chan; + + spin_lock_irqsave(&pl330->lock, flags); + + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + if ((thrd->free) && (!_manager_ns(thrd) || + _chan_ns(pi, i))) { + thrd->ev = _alloc_event(thrd); + if (thrd->ev >= 0) { + thrd->free = false; + thrd->lstenq = 1; + thrd->req[0].r = NULL; + mark_free(thrd, 0); + thrd->req[1].r = NULL; + mark_free(thrd, 1); + break; + } + } + thrd = NULL; + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return thrd; +} + +/* Release an event */ +static inline void _free_event(struct pl330_thread *thrd, int ev) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + + /* If the event is valid and was held by the thread */ + if (ev >= 0 && ev < pi->pcfg.num_events + && pl330->events[ev] == thrd->id) + pl330->events[ev] = -1; +} + +static void pl330_release_channel(void *ch_id) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + unsigned long flags; + + if (!thrd || thrd->free) + return; + + _stop(thrd); + + _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); + _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); + + pl330 = thrd->dmac; + + spin_lock_irqsave(&pl330->lock, flags); + _free_event(thrd, thrd->ev); + thrd->free = true; + spin_unlock_irqrestore(&pl330->lock, flags); +} + +/* Initialize the structure for PL330 configuration, that can be used + * by the client driver the make best use of the DMAC + */ +static void read_dmac_config(struct pl330_info *pi) +{ + void __iomem *regs = pi->base; + u32 val; + + val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; + val &= CRD_DATA_WIDTH_MASK; + pi->pcfg.data_bus_width = 8 * (1 << val); + + val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; + val &= CRD_DATA_BUFF_MASK; + pi->pcfg.data_buf_dep = val + 1; + + val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; + val &= CR0_NUM_CHANS_MASK; + val += 1; + pi->pcfg.num_chan = val; + + val = readl(regs + CR0); + if (val & CR0_PERIPH_REQ_SET) { + val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; + val += 1; + pi->pcfg.num_peri = val; + pi->pcfg.peri_ns = readl(regs + CR4); + } else { + pi->pcfg.num_peri = 0; + } + + val = readl(regs + CR0); + if (val & CR0_BOOT_MAN_NS) + pi->pcfg.mode |= DMAC_MODE_NS; + else + pi->pcfg.mode &= ~DMAC_MODE_NS; + + val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; + val &= CR0_NUM_EVENTS_MASK; + val += 1; + pi->pcfg.num_events = val; + + pi->pcfg.irq_ns = readl(regs + CR3); + + pi->pcfg.periph_id = get_id(pi, PERIPH_ID); + pi->pcfg.pcell_id = get_id(pi, PCELL_ID); +} + +static inline void _reset_thread(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + + thrd->req[0].mc_cpu = pl330->mcode_cpu + + (thrd->id * pi->mcbufsz); + thrd->req[0].mc_bus = pl330->mcode_bus + + (thrd->id * pi->mcbufsz); + thrd->req[0].r = NULL; + mark_free(thrd, 0); + + thrd->req[1].mc_cpu = thrd->req[0].mc_cpu + + pi->mcbufsz / 2; + thrd->req[1].mc_bus = thrd->req[0].mc_bus + + pi->mcbufsz / 2; + thrd->req[1].r = NULL; + mark_free(thrd, 1); +} + +static int dmac_alloc_threads(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Allocate 1 Manager and 'chans' Channel threads */ + pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), + GFP_KERNEL); + if (!pl330->channels) + return -ENOMEM; + + /* Init Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + thrd->id = i; + thrd->dmac = pl330; + _reset_thread(thrd); + thrd->free = true; + } + + /* MANAGER is indexed at the end */ + thrd = &pl330->channels[chans]; + thrd->id = chans; + thrd->dmac = pl330; + thrd->free = false; + pl330->manager = thrd; + + return 0; +} + +static int dmac_alloc_resources(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + int ret; + + /* + * Alloc MicroCode buffer for 'chans' Channel threads. + * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) + */ + pl330->mcode_cpu = dma_alloc_coherent(pi->dev, + chans * pi->mcbufsz, + &pl330->mcode_bus, GFP_KERNEL); + if (!pl330->mcode_cpu) { + dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + ret = dmac_alloc_threads(pl330); + if (ret) { + dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", + __func__, __LINE__); + dma_free_coherent(pi->dev, + chans * pi->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus); + return ret; + } + + return 0; +} + +static int pl330_add(struct pl330_info *pi) +{ + struct pl330_dmac *pl330; + void __iomem *regs; + int i, ret; + + if (!pi || !pi->dev) + return -EINVAL; + + /* If already added */ + if (pi->pl330_data) + return -EINVAL; + + /* + * If the SoC can perform reset on the DMAC, then do it + * before reading its configuration. + */ + if (pi->dmac_reset) + pi->dmac_reset(pi); + + regs = pi->base; + + /* Check if we can handle this DMAC */ + if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL + || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { + dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", + get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID)); + return -EINVAL; + } + + /* Read the configuration of the DMAC */ + read_dmac_config(pi); + + if (pi->pcfg.num_events == 0) { + dev_err(pi->dev, "%s:%d Can't work without events!\n", + __func__, __LINE__); + return -EINVAL; + } + + pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); + if (!pl330) { + dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + /* Assign the info structure and private data */ + pl330->pinfo = pi; + pi->pl330_data = pl330; + + spin_lock_init(&pl330->lock); + + INIT_LIST_HEAD(&pl330->req_done); + + /* Use default MC buffer size if not provided */ + if (!pi->mcbufsz) + pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; + + /* Mark all events as free */ + for (i = 0; i < pi->pcfg.num_events; i++) + pl330->events[i] = -1; + + /* Allocate resources needed by the DMAC */ + ret = dmac_alloc_resources(pl330); + if (ret) { + dev_err(pi->dev, "Unable to create channels for DMAC\n"); + kfree(pl330); + return ret; + } + + tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); + + pl330->state = INIT; + + return 0; +} + +static int dmac_free_threads(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Release Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + pl330_release_channel((void *)thrd); + } + + /* Free memory */ + kfree(pl330->channels); + + return 0; +} + +static void dmac_free_resources(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + + dmac_free_threads(pl330); + + dma_free_coherent(pi->dev, chans * pi->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus); +} + +static void pl330_del(struct pl330_info *pi) +{ + struct pl330_dmac *pl330; + + if (!pi || !pi->pl330_data) + return; + + pl330 = pi->pl330_data; + + pl330->state = UNINIT; + + tasklet_kill(&pl330->tasks); + + /* Free DMAC resources */ + dmac_free_resources(pl330); + + kfree(pl330); + pi->pl330_data = NULL; +} + /* forward declaration */ static struct amba_driver pl330_driver; @@ -234,7 +2320,7 @@ static void pl330_tasklet(unsigned long data) /* Pick up ripe tomatoes */ list_for_each_entry_safe(desc, _dt, &pch->work_list, node) if (desc->status == DONE) { - pch->completed = desc->txd.cookie; + dma_cookie_complete(&desc->txd); list_move_tail(&desc->node, &list); } @@ -305,7 +2391,7 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) spin_lock_irqsave(&pch->lock, flags); - pch->completed = chan->cookie = 1; + dma_cookie_init(chan); pch->cyclic = false; pch->pl330_chid = pl330_request_channel(&pdmac->pif); @@ -340,7 +2426,6 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned /* Mark all desc done */ list_for_each_entry_safe(desc, _dt, &pch->work_list , node) { desc->status = DONE; - pch->completed = desc->txd.cookie; list_move_tail(&desc->node, &list); } @@ -396,18 +2481,7 @@ static enum dma_status pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - struct dma_pl330_chan *pch = to_pchan(chan); - dma_cookie_t last_done, last_used; - int ret; - - last_done = pch->completed; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_done, last_used); - - dma_set_tx_state(txstate, last_done, last_used, 0); - - return ret; + return dma_cookie_status(chan, cookie, txstate); } static void pl330_issue_pending(struct dma_chan *chan) @@ -430,26 +2504,16 @@ static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx) spin_lock_irqsave(&pch->lock, flags); /* Assign cookies to all nodes */ - cookie = tx->chan->cookie; - while (!list_empty(&last->node)) { desc = list_entry(last->node.next, struct dma_pl330_desc, node); - if (++cookie < 0) - cookie = 1; - desc->txd.cookie = cookie; + dma_cookie_assign(&desc->txd); list_move_tail(&desc->node, &pch->work_list); } - if (++cookie < 0) - cookie = 1; - last->txd.cookie = cookie; - + cookie = dma_cookie_assign(&last->txd); list_add_tail(&last->node, &pch->work_list); - - tx->chan->cookie = cookie; - spin_unlock_irqrestore(&pch->lock, flags); return cookie; @@ -553,6 +2617,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) async_tx_ack(&desc->txd); desc->req.peri = peri_id ? pch->chan.chan_id : 0; + desc->rqcfg.pcfg = &pch->dmac->pif.pcfg; dma_async_tx_descriptor_init(&desc->txd, &pch->chan); @@ -621,7 +2686,8 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len) static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct dma_pl330_desc *desc; struct dma_pl330_chan *pch = to_pchan(chan); @@ -711,7 +2777,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, static struct dma_async_tx_descriptor * pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flg) + unsigned long flg, void *context) { struct dma_pl330_desc *first, *desc = NULL; struct dma_pl330_chan *pch = to_pchan(chan); @@ -829,7 +2895,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) if (IS_ERR(pdmac->clk)) { dev_err(&adev->dev, "Cannot get operation clock.\n"); ret = -EINVAL; - goto probe_err1; + goto probe_err2; } amba_set_drvdata(adev, pdmac); @@ -843,11 +2909,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) ret = request_irq(irq, pl330_irq_handler, 0, dev_name(&adev->dev), pi); if (ret) - goto probe_err2; + goto probe_err3; ret = pl330_add(pi); if (ret) - goto probe_err3; + goto probe_err4; INIT_LIST_HEAD(&pdmac->desc_pool); spin_lock_init(&pdmac->pool_lock); @@ -904,7 +2970,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) ret = dma_async_device_register(pd); if (ret) { dev_err(&adev->dev, "unable to register DMAC\n"); - goto probe_err4; + goto probe_err5; } dev_info(&adev->dev, @@ -917,10 +2983,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) return 0; -probe_err4: +probe_err5: pl330_del(pi); -probe_err3: +probe_err4: free_irq(irq, pi); +probe_err3: +#ifndef CONFIG_PM_RUNTIME + clk_disable(pdmac->clk); +#endif + clk_put(pdmac->clk); probe_err2: iounmap(pi->base); probe_err1: diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c index fc457a7..ced9882 100644 --- a/drivers/dma/ppc4xx/adma.c +++ b/drivers/dma/ppc4xx/adma.c @@ -46,6 +46,7 @@ #include <asm/dcr.h> #include <asm/dcr-regs.h> #include "adma.h" +#include "../dmaengine.h" enum ppc_adma_init_code { PPC_ADMA_INIT_OK = 0, @@ -1930,7 +1931,7 @@ static void __ppc440spe_adma_slot_cleanup(struct ppc440spe_adma_chan *chan) if (end_of_chain && slot_cnt) { /* Should wait for ZeroSum completion */ if (cookie > 0) - chan->completed_cookie = cookie; + chan->common.completed_cookie = cookie; return; } @@ -1960,7 +1961,7 @@ static void __ppc440spe_adma_slot_cleanup(struct ppc440spe_adma_chan *chan) BUG_ON(!seen_current); if (cookie > 0) { - chan->completed_cookie = cookie; + chan->common.completed_cookie = cookie; pr_debug("\tcompleted cookie %d\n", cookie); } @@ -2150,22 +2151,6 @@ static int ppc440spe_adma_alloc_chan_resources(struct dma_chan *chan) } /** - * ppc440spe_desc_assign_cookie - assign a cookie - */ -static dma_cookie_t ppc440spe_desc_assign_cookie( - struct ppc440spe_adma_chan *chan, - struct ppc440spe_adma_desc_slot *desc) -{ - dma_cookie_t cookie = chan->common.cookie; - - cookie++; - if (cookie < 0) - cookie = 1; - chan->common.cookie = desc->async_tx.cookie = cookie; - return cookie; -} - -/** * ppc440spe_rxor_set_region_data - */ static void ppc440spe_rxor_set_region(struct ppc440spe_adma_desc_slot *desc, @@ -2235,8 +2220,7 @@ static dma_cookie_t ppc440spe_adma_tx_submit(struct dma_async_tx_descriptor *tx) slots_per_op = group_start->slots_per_op; spin_lock_bh(&chan->lock); - - cookie = ppc440spe_desc_assign_cookie(chan, sw_desc); + cookie = dma_cookie_assign(tx); if (unlikely(list_empty(&chan->chain))) { /* first peer */ @@ -3944,28 +3928,16 @@ static enum dma_status ppc440spe_adma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct ppc440spe_adma_chan *ppc440spe_chan; - dma_cookie_t last_used; - dma_cookie_t last_complete; enum dma_status ret; ppc440spe_chan = to_ppc440spe_adma_chan(chan); - last_used = chan->cookie; - last_complete = ppc440spe_chan->completed_cookie; - - dma_set_tx_state(txstate, last_complete, last_used, 0); - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); if (ret == DMA_SUCCESS) return ret; ppc440spe_adma_slot_cleanup(ppc440spe_chan); - last_used = chan->cookie; - last_complete = ppc440spe_chan->completed_cookie; - - dma_set_tx_state(txstate, last_complete, last_used, 0); - - return dma_async_is_complete(cookie, last_complete, last_used); + return dma_cookie_status(chan, cookie, txstate); } /** @@ -4050,16 +4022,12 @@ static void ppc440spe_chan_start_null_xor(struct ppc440spe_adma_chan *chan) async_tx_ack(&sw_desc->async_tx); ppc440spe_desc_init_null_xor(group_start); - cookie = chan->common.cookie; - cookie++; - if (cookie <= 1) - cookie = 2; + cookie = dma_cookie_assign(&sw_desc->async_tx); /* initialize the completed cookie to be less than * the most recently used cookie */ - chan->completed_cookie = cookie - 1; - chan->common.cookie = sw_desc->async_tx.cookie = cookie; + chan->common.completed_cookie = cookie - 1; /* channel should not be busy */ BUG_ON(ppc440spe_chan_is_busy(chan)); @@ -4529,6 +4497,7 @@ static int __devinit ppc440spe_adma_probe(struct platform_device *ofdev) INIT_LIST_HEAD(&chan->all_slots); chan->device = adev; chan->common.device = &adev->common; + dma_cookie_init(&chan->common); list_add_tail(&chan->common.device_node, &adev->common.channels); tasklet_init(&chan->irq_tasklet, ppc440spe_adma_tasklet, (unsigned long)chan); diff --git a/drivers/dma/ppc4xx/adma.h b/drivers/dma/ppc4xx/adma.h index 8ada5a81..26b7a5e 100644 --- a/drivers/dma/ppc4xx/adma.h +++ b/drivers/dma/ppc4xx/adma.h @@ -81,7 +81,6 @@ struct ppc440spe_adma_device { * @common: common dmaengine channel object members * @all_slots: complete domain of slots usable by the channel * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation * @slots_allocated: records the actual size of the descriptor slot pool * @hw_chain_inited: h/w descriptor chain initialization flag * @irq_tasklet: bottom half where ppc440spe_adma_slot_cleanup runs @@ -99,7 +98,6 @@ struct ppc440spe_adma_chan { struct list_head all_slots; struct ppc440spe_adma_desc_slot *last_used; int pending; - dma_cookie_t completed_cookie; int slots_allocated; int hw_chain_inited; struct tasklet_struct irq_tasklet; diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c new file mode 100644 index 0000000..16a6b48 --- /dev/null +++ b/drivers/dma/sa11x0-dma.c @@ -0,0 +1,1109 @@ +/* + * SA11x0 DMAengine support + * + * Copyright (C) 2012 Russell King + * Derived in part from arch/arm/mach-sa1100/dma.c, + * Copyright (C) 2000, 2001 by Nicolas Pitre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/sched.h> +#include <linux/device.h> +#include <linux/dmaengine.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sa11x0-dma.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#define NR_PHY_CHAN 6 +#define DMA_ALIGN 3 +#define DMA_MAX_SIZE 0x1fff +#define DMA_CHUNK_SIZE 0x1000 + +#define DMA_DDAR 0x00 +#define DMA_DCSR_S 0x04 +#define DMA_DCSR_C 0x08 +#define DMA_DCSR_R 0x0c +#define DMA_DBSA 0x10 +#define DMA_DBTA 0x14 +#define DMA_DBSB 0x18 +#define DMA_DBTB 0x1c +#define DMA_SIZE 0x20 + +#define DCSR_RUN (1 << 0) +#define DCSR_IE (1 << 1) +#define DCSR_ERROR (1 << 2) +#define DCSR_DONEA (1 << 3) +#define DCSR_STRTA (1 << 4) +#define DCSR_DONEB (1 << 5) +#define DCSR_STRTB (1 << 6) +#define DCSR_BIU (1 << 7) + +#define DDAR_RW (1 << 0) /* 0 = W, 1 = R */ +#define DDAR_E (1 << 1) /* 0 = LE, 1 = BE */ +#define DDAR_BS (1 << 2) /* 0 = BS4, 1 = BS8 */ +#define DDAR_DW (1 << 3) /* 0 = 8b, 1 = 16b */ +#define DDAR_Ser0UDCTr (0x0 << 4) +#define DDAR_Ser0UDCRc (0x1 << 4) +#define DDAR_Ser1SDLCTr (0x2 << 4) +#define DDAR_Ser1SDLCRc (0x3 << 4) +#define DDAR_Ser1UARTTr (0x4 << 4) +#define DDAR_Ser1UARTRc (0x5 << 4) +#define DDAR_Ser2ICPTr (0x6 << 4) +#define DDAR_Ser2ICPRc (0x7 << 4) +#define DDAR_Ser3UARTTr (0x8 << 4) +#define DDAR_Ser3UARTRc (0x9 << 4) +#define DDAR_Ser4MCP0Tr (0xa << 4) +#define DDAR_Ser4MCP0Rc (0xb << 4) +#define DDAR_Ser4MCP1Tr (0xc << 4) +#define DDAR_Ser4MCP1Rc (0xd << 4) +#define DDAR_Ser4SSPTr (0xe << 4) +#define DDAR_Ser4SSPRc (0xf << 4) + +struct sa11x0_dma_sg { + u32 addr; + u32 len; +}; + +struct sa11x0_dma_desc { + struct dma_async_tx_descriptor tx; + u32 ddar; + size_t size; + + /* maybe protected by c->lock */ + struct list_head node; + unsigned sglen; + struct sa11x0_dma_sg sg[0]; +}; + +struct sa11x0_dma_phy; + +struct sa11x0_dma_chan { + struct dma_chan chan; + spinlock_t lock; + dma_cookie_t lc; + + /* protected by c->lock */ + struct sa11x0_dma_phy *phy; + enum dma_status status; + struct list_head desc_submitted; + struct list_head desc_issued; + + /* protected by d->lock */ + struct list_head node; + + u32 ddar; + const char *name; +}; + +struct sa11x0_dma_phy { + void __iomem *base; + struct sa11x0_dma_dev *dev; + unsigned num; + + struct sa11x0_dma_chan *vchan; + + /* Protected by c->lock */ + unsigned sg_load; + struct sa11x0_dma_desc *txd_load; + unsigned sg_done; + struct sa11x0_dma_desc *txd_done; +#ifdef CONFIG_PM_SLEEP + u32 dbs[2]; + u32 dbt[2]; + u32 dcsr; +#endif +}; + +struct sa11x0_dma_dev { + struct dma_device slave; + void __iomem *base; + spinlock_t lock; + struct tasklet_struct task; + struct list_head chan_pending; + struct list_head desc_complete; + struct sa11x0_dma_phy phy[NR_PHY_CHAN]; +}; + +static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct sa11x0_dma_chan, chan); +} + +static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev) +{ + return container_of(dmadev, struct sa11x0_dma_dev, slave); +} + +static struct sa11x0_dma_desc *to_sa11x0_dma_tx(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct sa11x0_dma_desc, tx); +} + +static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c) +{ + if (list_empty(&c->desc_issued)) + return NULL; + + return list_first_entry(&c->desc_issued, struct sa11x0_dma_desc, node); +} + +static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd) +{ + list_del(&txd->node); + p->txd_load = txd; + p->sg_load = 0; + + dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n", + p->num, txd, txd->tx.cookie, txd->ddar); +} + +static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p, + struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = p->txd_load; + struct sa11x0_dma_sg *sg; + void __iomem *base = p->base; + unsigned dbsx, dbtx; + u32 dcsr; + + if (!txd) + return; + + dcsr = readl_relaxed(base + DMA_DCSR_R); + + /* Don't try to load the next transfer if both buffers are started */ + if ((dcsr & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) + return; + + if (p->sg_load == txd->sglen) { + struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c); + + /* + * We have reached the end of the current descriptor. + * Peek at the next descriptor, and if compatible with + * the current, start processing it. + */ + if (txn && txn->ddar == txd->ddar) { + txd = txn; + sa11x0_dma_start_desc(p, txn); + } else { + p->txd_load = NULL; + return; + } + } + + sg = &txd->sg[p->sg_load++]; + + /* Select buffer to load according to channel status */ + if (((dcsr & (DCSR_BIU | DCSR_STRTB)) == (DCSR_BIU | DCSR_STRTB)) || + ((dcsr & (DCSR_BIU | DCSR_STRTA)) == 0)) { + dbsx = DMA_DBSA; + dbtx = DMA_DBTA; + dcsr = DCSR_STRTA | DCSR_IE | DCSR_RUN; + } else { + dbsx = DMA_DBSB; + dbtx = DMA_DBTB; + dcsr = DCSR_STRTB | DCSR_IE | DCSR_RUN; + } + + writel_relaxed(sg->addr, base + dbsx); + writel_relaxed(sg->len, base + dbtx); + writel(dcsr, base + DMA_DCSR_S); + + dev_dbg(p->dev->slave.dev, "pchan %u: load: DCSR:%02x DBS%c:%08x DBT%c:%08x\n", + p->num, dcsr, + 'A' + (dbsx == DMA_DBSB), sg->addr, + 'A' + (dbtx == DMA_DBTB), sg->len); +} + +static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p, + struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = p->txd_done; + + if (++p->sg_done == txd->sglen) { + struct sa11x0_dma_dev *d = p->dev; + + dev_vdbg(d->slave.dev, "pchan %u: txd %p[%x]: completed\n", + p->num, p->txd_done, p->txd_done->tx.cookie); + + c->lc = txd->tx.cookie; + + spin_lock(&d->lock); + list_add_tail(&txd->node, &d->desc_complete); + spin_unlock(&d->lock); + + p->sg_done = 0; + p->txd_done = p->txd_load; + + tasklet_schedule(&d->task); + } + + sa11x0_dma_start_sg(p, c); +} + +static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id) +{ + struct sa11x0_dma_phy *p = dev_id; + struct sa11x0_dma_dev *d = p->dev; + struct sa11x0_dma_chan *c; + u32 dcsr; + + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + if (!(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB))) + return IRQ_NONE; + + /* Clear reported status bits */ + writel_relaxed(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB), + p->base + DMA_DCSR_C); + + dev_dbg(d->slave.dev, "pchan %u: irq: DCSR:%02x\n", p->num, dcsr); + + if (dcsr & DCSR_ERROR) { + dev_err(d->slave.dev, "pchan %u: error. DCSR:%02x DDAR:%08x DBSA:%08x DBTA:%08x DBSB:%08x DBTB:%08x\n", + p->num, dcsr, + readl_relaxed(p->base + DMA_DDAR), + readl_relaxed(p->base + DMA_DBSA), + readl_relaxed(p->base + DMA_DBTA), + readl_relaxed(p->base + DMA_DBSB), + readl_relaxed(p->base + DMA_DBTB)); + } + + c = p->vchan; + if (c) { + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + /* + * Now that we're holding the lock, check that the vchan + * really is associated with this pchan before touching the + * hardware. This should always succeed, because we won't + * change p->vchan or c->phy while the channel is actively + * transferring. + */ + if (c->phy == p) { + if (dcsr & DCSR_DONEA) + sa11x0_dma_complete(p, c); + if (dcsr & DCSR_DONEB) + sa11x0_dma_complete(p, c); + } + spin_unlock_irqrestore(&c->lock, flags); + } + + return IRQ_HANDLED; +} + +static void sa11x0_dma_start_txd(struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = sa11x0_dma_next_desc(c); + + /* If the issued list is empty, we have no further txds to process */ + if (txd) { + struct sa11x0_dma_phy *p = c->phy; + + sa11x0_dma_start_desc(p, txd); + p->txd_done = txd; + p->sg_done = 0; + + /* The channel should not have any transfers started */ + WARN_ON(readl_relaxed(p->base + DMA_DCSR_R) & + (DCSR_STRTA | DCSR_STRTB)); + + /* Clear the run and start bits before changing DDAR */ + writel_relaxed(DCSR_RUN | DCSR_STRTA | DCSR_STRTB, + p->base + DMA_DCSR_C); + writel_relaxed(txd->ddar, p->base + DMA_DDAR); + + /* Try to start both buffers */ + sa11x0_dma_start_sg(p, c); + sa11x0_dma_start_sg(p, c); + } +} + +static void sa11x0_dma_tasklet(unsigned long arg) +{ + struct sa11x0_dma_dev *d = (struct sa11x0_dma_dev *)arg; + struct sa11x0_dma_phy *p; + struct sa11x0_dma_chan *c; + struct sa11x0_dma_desc *txd, *txn; + LIST_HEAD(head); + unsigned pch, pch_alloc = 0; + + dev_dbg(d->slave.dev, "tasklet enter\n"); + + /* Get the completed tx descriptors */ + spin_lock_irq(&d->lock); + list_splice_init(&d->desc_complete, &head); + spin_unlock_irq(&d->lock); + + list_for_each_entry(txd, &head, node) { + c = to_sa11x0_dma_chan(txd->tx.chan); + + dev_dbg(d->slave.dev, "vchan %p: txd %p[%x] completed\n", + c, txd, txd->tx.cookie); + + spin_lock_irq(&c->lock); + p = c->phy; + if (p) { + if (!p->txd_done) + sa11x0_dma_start_txd(c); + if (!p->txd_done) { + /* No current txd associated with this channel */ + dev_dbg(d->slave.dev, "pchan %u: free\n", p->num); + + /* Mark this channel free */ + c->phy = NULL; + p->vchan = NULL; + } + } + spin_unlock_irq(&c->lock); + } + + spin_lock_irq(&d->lock); + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + p = &d->phy[pch]; + + if (p->vchan == NULL && !list_empty(&d->chan_pending)) { + c = list_first_entry(&d->chan_pending, + struct sa11x0_dma_chan, node); + list_del_init(&c->node); + + pch_alloc |= 1 << pch; + + /* Mark this channel allocated */ + p->vchan = c; + + dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, c); + } + } + spin_unlock_irq(&d->lock); + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + if (pch_alloc & (1 << pch)) { + p = &d->phy[pch]; + c = p->vchan; + + spin_lock_irq(&c->lock); + c->phy = p; + + sa11x0_dma_start_txd(c); + spin_unlock_irq(&c->lock); + } + } + + /* Now free the completed tx descriptor, and call their callbacks */ + list_for_each_entry_safe(txd, txn, &head, node) { + dma_async_tx_callback callback = txd->tx.callback; + void *callback_param = txd->tx.callback_param; + + dev_dbg(d->slave.dev, "txd %p[%x]: callback and free\n", + txd, txd->tx.cookie); + + kfree(txd); + + if (callback) + callback(callback_param); + } + + dev_dbg(d->slave.dev, "tasklet exit\n"); +} + + +static void sa11x0_dma_desc_free(struct sa11x0_dma_dev *d, struct list_head *head) +{ + struct sa11x0_dma_desc *txd, *txn; + + list_for_each_entry_safe(txd, txn, head, node) { + dev_dbg(d->slave.dev, "txd %p: freeing\n", txd); + kfree(txd); + } +} + +static int sa11x0_dma_alloc_chan_resources(struct dma_chan *chan) +{ + return 0; +} + +static void sa11x0_dma_free_chan_resources(struct dma_chan *chan) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + unsigned long flags; + LIST_HEAD(head); + + spin_lock_irqsave(&c->lock, flags); + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + + list_splice_tail_init(&c->desc_submitted, &head); + list_splice_tail_init(&c->desc_issued, &head); + spin_unlock_irqrestore(&c->lock, flags); + + sa11x0_dma_desc_free(d, &head); +} + +static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p) +{ + unsigned reg; + u32 dcsr; + + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + + if ((dcsr & (DCSR_BIU | DCSR_STRTA)) == DCSR_STRTA || + (dcsr & (DCSR_BIU | DCSR_STRTB)) == DCSR_BIU) + reg = DMA_DBSA; + else + reg = DMA_DBSB; + + return readl_relaxed(p->base + reg); +} + +static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *state) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + struct sa11x0_dma_phy *p; + struct sa11x0_dma_desc *txd; + dma_cookie_t last_used, last_complete; + unsigned long flags; + enum dma_status ret; + size_t bytes = 0; + + last_used = c->chan.cookie; + last_complete = c->lc; + + ret = dma_async_is_complete(cookie, last_complete, last_used); + if (ret == DMA_SUCCESS) { + dma_set_tx_state(state, last_complete, last_used, 0); + return ret; + } + + spin_lock_irqsave(&c->lock, flags); + p = c->phy; + ret = c->status; + if (p) { + dma_addr_t addr = sa11x0_dma_pos(p); + + dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr); + + txd = p->txd_done; + if (txd) { + unsigned i; + + for (i = 0; i < txd->sglen; i++) { + dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n", + i, txd->sg[i].addr, txd->sg[i].len); + if (addr >= txd->sg[i].addr && + addr < txd->sg[i].addr + txd->sg[i].len) { + unsigned len; + + len = txd->sg[i].len - + (addr - txd->sg[i].addr); + dev_vdbg(d->slave.dev, "tx_status: [%u] +%x\n", + i, len); + bytes += len; + i++; + break; + } + } + for (; i < txd->sglen; i++) { + dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x ++\n", + i, txd->sg[i].addr, txd->sg[i].len); + bytes += txd->sg[i].len; + } + } + if (txd != p->txd_load && p->txd_load) + bytes += p->txd_load->size; + } + list_for_each_entry(txd, &c->desc_issued, node) { + bytes += txd->size; + } + spin_unlock_irqrestore(&c->lock, flags); + + dma_set_tx_state(state, last_complete, last_used, bytes); + + dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes); + + return ret; +} + +/* + * Move pending txds to the issued list, and re-init pending list. + * If not already pending, add this channel to the list of pending + * channels and trigger the tasklet to run. + */ +static void sa11x0_dma_issue_pending(struct dma_chan *chan) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + list_splice_tail_init(&c->desc_submitted, &c->desc_issued); + if (!list_empty(&c->desc_issued)) { + spin_lock(&d->lock); + if (!c->phy && list_empty(&c->node)) { + list_add_tail(&c->node, &d->chan_pending); + tasklet_schedule(&d->task); + dev_dbg(d->slave.dev, "vchan %p: issued\n", c); + } + spin_unlock(&d->lock); + } else + dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", c); + spin_unlock_irqrestore(&c->lock, flags); +} + +static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(tx->chan); + struct sa11x0_dma_desc *txd = to_sa11x0_dma_tx(tx); + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + c->chan.cookie += 1; + if (c->chan.cookie < 0) + c->chan.cookie = 1; + txd->tx.cookie = c->chan.cookie; + + list_add_tail(&txd->node, &c->desc_submitted); + spin_unlock_irqrestore(&c->lock, flags); + + dev_dbg(tx->chan->device->dev, "vchan %p: txd %p[%x]: submitted\n", + c, txd, txd->tx.cookie); + + return txd->tx.cookie; +} + +static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen, + enum dma_transfer_direction dir, unsigned long flags) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_desc *txd; + struct scatterlist *sgent; + unsigned i, j = sglen; + size_t size = 0; + + /* SA11x0 channels can only operate in their native direction */ + if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) { + dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n", + c, c->ddar, dir); + return NULL; + } + + /* Do not allow zero-sized txds */ + if (sglen == 0) + return NULL; + + for_each_sg(sg, sgent, sglen, i) { + dma_addr_t addr = sg_dma_address(sgent); + unsigned int len = sg_dma_len(sgent); + + if (len > DMA_MAX_SIZE) + j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1; + if (addr & DMA_ALIGN) { + dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %08x\n", + c, addr); + return NULL; + } + } + + txd = kzalloc(sizeof(*txd) + j * sizeof(txd->sg[0]), GFP_ATOMIC); + if (!txd) { + dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", c); + return NULL; + } + + j = 0; + for_each_sg(sg, sgent, sglen, i) { + dma_addr_t addr = sg_dma_address(sgent); + unsigned len = sg_dma_len(sgent); + + size += len; + + do { + unsigned tlen = len; + + /* + * Check whether the transfer will fit. If not, try + * to split the transfer up such that we end up with + * equal chunks - but make sure that we preserve the + * alignment. This avoids small segments. + */ + if (tlen > DMA_MAX_SIZE) { + unsigned mult = DIV_ROUND_UP(tlen, + DMA_MAX_SIZE & ~DMA_ALIGN); + + tlen = (tlen / mult) & ~DMA_ALIGN; + } + + txd->sg[j].addr = addr; + txd->sg[j].len = tlen; + + addr += tlen; + len -= tlen; + j++; + } while (len); + } + + dma_async_tx_descriptor_init(&txd->tx, &c->chan); + txd->tx.flags = flags; + txd->tx.tx_submit = sa11x0_dma_tx_submit; + txd->ddar = c->ddar; + txd->size = size; + txd->sglen = j; + + dev_dbg(chan->device->dev, "vchan %p: txd %p: size %u nr %u\n", + c, txd, txd->size, txd->sglen); + + return &txd->tx; +} + +static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg) +{ + u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW); + dma_addr_t addr; + enum dma_slave_buswidth width; + u32 maxburst; + + if (ddar & DDAR_RW) { + addr = cfg->src_addr; + width = cfg->src_addr_width; + maxburst = cfg->src_maxburst; + } else { + addr = cfg->dst_addr; + width = cfg->dst_addr_width; + maxburst = cfg->dst_maxburst; + } + + if ((width != DMA_SLAVE_BUSWIDTH_1_BYTE && + width != DMA_SLAVE_BUSWIDTH_2_BYTES) || + (maxburst != 4 && maxburst != 8)) + return -EINVAL; + + if (width == DMA_SLAVE_BUSWIDTH_2_BYTES) + ddar |= DDAR_DW; + if (maxburst == 8) + ddar |= DDAR_BS; + + dev_dbg(c->chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n", + c, addr, width, maxburst); + + c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6; + + return 0; +} + +static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + struct sa11x0_dma_phy *p; + LIST_HEAD(head); + unsigned long flags; + int ret; + + switch (cmd) { + case DMA_SLAVE_CONFIG: + return sa11x0_dma_slave_config(c, (struct dma_slave_config *)arg); + + case DMA_TERMINATE_ALL: + dev_dbg(d->slave.dev, "vchan %p: terminate all\n", c); + /* Clear the tx descriptor lists */ + spin_lock_irqsave(&c->lock, flags); + list_splice_tail_init(&c->desc_submitted, &head); + list_splice_tail_init(&c->desc_issued, &head); + + p = c->phy; + if (p) { + struct sa11x0_dma_desc *txd, *txn; + + dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num); + /* vchan is assigned to a pchan - stop the channel */ + writel(DCSR_RUN | DCSR_IE | + DCSR_STRTA | DCSR_DONEA | + DCSR_STRTB | DCSR_DONEB, + p->base + DMA_DCSR_C); + + list_for_each_entry_safe(txd, txn, &d->desc_complete, node) + if (txd->tx.chan == &c->chan) + list_move(&txd->node, &head); + + if (p->txd_load) { + if (p->txd_load != p->txd_done) + list_add_tail(&p->txd_load->node, &head); + p->txd_load = NULL; + } + if (p->txd_done) { + list_add_tail(&p->txd_done->node, &head); + p->txd_done = NULL; + } + c->phy = NULL; + spin_lock(&d->lock); + p->vchan = NULL; + spin_unlock(&d->lock); + tasklet_schedule(&d->task); + } + spin_unlock_irqrestore(&c->lock, flags); + sa11x0_dma_desc_free(d, &head); + ret = 0; + break; + + case DMA_PAUSE: + dev_dbg(d->slave.dev, "vchan %p: pause\n", c); + spin_lock_irqsave(&c->lock, flags); + if (c->status == DMA_IN_PROGRESS) { + c->status = DMA_PAUSED; + + p = c->phy; + if (p) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C); + } else { + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + } + } + spin_unlock_irqrestore(&c->lock, flags); + ret = 0; + break; + + case DMA_RESUME: + dev_dbg(d->slave.dev, "vchan %p: resume\n", c); + spin_lock_irqsave(&c->lock, flags); + if (c->status == DMA_PAUSED) { + c->status = DMA_IN_PROGRESS; + + p = c->phy; + if (p) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S); + } else if (!list_empty(&c->desc_issued)) { + spin_lock(&d->lock); + list_add_tail(&c->node, &d->chan_pending); + spin_unlock(&d->lock); + } + } + spin_unlock_irqrestore(&c->lock, flags); + ret = 0; + break; + + default: + ret = -ENXIO; + break; + } + + return ret; +} + +struct sa11x0_dma_channel_desc { + u32 ddar; + const char *name; +}; + +#define CD(d1, d2) { .ddar = DDAR_##d1 | d2, .name = #d1 } +static const struct sa11x0_dma_channel_desc chan_desc[] = { + CD(Ser0UDCTr, 0), + CD(Ser0UDCRc, DDAR_RW), + CD(Ser1SDLCTr, 0), + CD(Ser1SDLCRc, DDAR_RW), + CD(Ser1UARTTr, 0), + CD(Ser1UARTRc, DDAR_RW), + CD(Ser2ICPTr, 0), + CD(Ser2ICPRc, DDAR_RW), + CD(Ser3UARTTr, 0), + CD(Ser3UARTRc, DDAR_RW), + CD(Ser4MCP0Tr, 0), + CD(Ser4MCP0Rc, DDAR_RW), + CD(Ser4MCP1Tr, 0), + CD(Ser4MCP1Rc, DDAR_RW), + CD(Ser4SSPTr, 0), + CD(Ser4SSPRc, DDAR_RW), +}; + +static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev, + struct device *dev) +{ + unsigned i; + + dmadev->chancnt = ARRAY_SIZE(chan_desc); + INIT_LIST_HEAD(&dmadev->channels); + dmadev->dev = dev; + dmadev->device_alloc_chan_resources = sa11x0_dma_alloc_chan_resources; + dmadev->device_free_chan_resources = sa11x0_dma_free_chan_resources; + dmadev->device_control = sa11x0_dma_control; + dmadev->device_tx_status = sa11x0_dma_tx_status; + dmadev->device_issue_pending = sa11x0_dma_issue_pending; + + for (i = 0; i < dmadev->chancnt; i++) { + struct sa11x0_dma_chan *c; + + c = kzalloc(sizeof(*c), GFP_KERNEL); + if (!c) { + dev_err(dev, "no memory for channel %u\n", i); + return -ENOMEM; + } + + c->chan.device = dmadev; + c->status = DMA_IN_PROGRESS; + c->ddar = chan_desc[i].ddar; + c->name = chan_desc[i].name; + spin_lock_init(&c->lock); + INIT_LIST_HEAD(&c->desc_submitted); + INIT_LIST_HEAD(&c->desc_issued); + INIT_LIST_HEAD(&c->node); + list_add_tail(&c->chan.device_node, &dmadev->channels); + } + + return dma_async_device_register(dmadev); +} + +static int sa11x0_dma_request_irq(struct platform_device *pdev, int nr, + void *data) +{ + int irq = platform_get_irq(pdev, nr); + + if (irq <= 0) + return -ENXIO; + + return request_irq(irq, sa11x0_dma_irq, 0, dev_name(&pdev->dev), data); +} + +static void sa11x0_dma_free_irq(struct platform_device *pdev, int nr, + void *data) +{ + int irq = platform_get_irq(pdev, nr); + if (irq > 0) + free_irq(irq, data); +} + +static void sa11x0_dma_free_channels(struct dma_device *dmadev) +{ + struct sa11x0_dma_chan *c, *cn; + + list_for_each_entry_safe(c, cn, &dmadev->channels, chan.device_node) { + list_del(&c->chan.device_node); + kfree(c); + } +} + +static int __devinit sa11x0_dma_probe(struct platform_device *pdev) +{ + struct sa11x0_dma_dev *d; + struct resource *res; + unsigned i; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto err_alloc; + } + + spin_lock_init(&d->lock); + INIT_LIST_HEAD(&d->chan_pending); + INIT_LIST_HEAD(&d->desc_complete); + + d->base = ioremap(res->start, resource_size(res)); + if (!d->base) { + ret = -ENOMEM; + goto err_ioremap; + } + + tasklet_init(&d->task, sa11x0_dma_tasklet, (unsigned long)d); + + for (i = 0; i < NR_PHY_CHAN; i++) { + struct sa11x0_dma_phy *p = &d->phy[i]; + + p->dev = d; + p->num = i; + p->base = d->base + i * DMA_SIZE; + writel_relaxed(DCSR_RUN | DCSR_IE | DCSR_ERROR | + DCSR_DONEA | DCSR_STRTA | DCSR_DONEB | DCSR_STRTB, + p->base + DMA_DCSR_C); + writel_relaxed(0, p->base + DMA_DDAR); + + ret = sa11x0_dma_request_irq(pdev, i, p); + if (ret) { + while (i) { + i--; + sa11x0_dma_free_irq(pdev, i, &d->phy[i]); + } + goto err_irq; + } + } + + dma_cap_set(DMA_SLAVE, d->slave.cap_mask); + d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg; + ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev); + if (ret) { + dev_warn(d->slave.dev, "failed to register slave async device: %d\n", + ret); + goto err_slave_reg; + } + + platform_set_drvdata(pdev, d); + return 0; + + err_slave_reg: + sa11x0_dma_free_channels(&d->slave); + for (i = 0; i < NR_PHY_CHAN; i++) + sa11x0_dma_free_irq(pdev, i, &d->phy[i]); + err_irq: + tasklet_kill(&d->task); + iounmap(d->base); + err_ioremap: + kfree(d); + err_alloc: + return ret; +} + +static int __devexit sa11x0_dma_remove(struct platform_device *pdev) +{ + struct sa11x0_dma_dev *d = platform_get_drvdata(pdev); + unsigned pch; + + dma_async_device_unregister(&d->slave); + + sa11x0_dma_free_channels(&d->slave); + for (pch = 0; pch < NR_PHY_CHAN; pch++) + sa11x0_dma_free_irq(pdev, pch, &d->phy[pch]); + tasklet_kill(&d->task); + iounmap(d->base); + kfree(d); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sa11x0_dma_suspend(struct device *dev) +{ + struct sa11x0_dma_dev *d = dev_get_drvdata(dev); + unsigned pch; + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + struct sa11x0_dma_phy *p = &d->phy[pch]; + u32 dcsr, saved_dcsr; + + dcsr = saved_dcsr = readl_relaxed(p->base + DMA_DCSR_R); + if (dcsr & DCSR_RUN) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C); + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + } + + saved_dcsr &= DCSR_RUN | DCSR_IE; + if (dcsr & DCSR_BIU) { + p->dbs[0] = readl_relaxed(p->base + DMA_DBSB); + p->dbt[0] = readl_relaxed(p->base + DMA_DBTB); + p->dbs[1] = readl_relaxed(p->base + DMA_DBSA); + p->dbt[1] = readl_relaxed(p->base + DMA_DBTA); + saved_dcsr |= (dcsr & DCSR_STRTA ? DCSR_STRTB : 0) | + (dcsr & DCSR_STRTB ? DCSR_STRTA : 0); + } else { + p->dbs[0] = readl_relaxed(p->base + DMA_DBSA); + p->dbt[0] = readl_relaxed(p->base + DMA_DBTA); + p->dbs[1] = readl_relaxed(p->base + DMA_DBSB); + p->dbt[1] = readl_relaxed(p->base + DMA_DBTB); + saved_dcsr |= dcsr & (DCSR_STRTA | DCSR_STRTB); + } + p->dcsr = saved_dcsr; + + writel(DCSR_STRTA | DCSR_STRTB, p->base + DMA_DCSR_C); + } + + return 0; +} + +static int sa11x0_dma_resume(struct device *dev) +{ + struct sa11x0_dma_dev *d = dev_get_drvdata(dev); + unsigned pch; + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + struct sa11x0_dma_phy *p = &d->phy[pch]; + struct sa11x0_dma_desc *txd = NULL; + u32 dcsr = readl_relaxed(p->base + DMA_DCSR_R); + + WARN_ON(dcsr & (DCSR_BIU | DCSR_STRTA | DCSR_STRTB | DCSR_RUN)); + + if (p->txd_done) + txd = p->txd_done; + else if (p->txd_load) + txd = p->txd_load; + + if (!txd) + continue; + + writel_relaxed(txd->ddar, p->base + DMA_DDAR); + + writel_relaxed(p->dbs[0], p->base + DMA_DBSA); + writel_relaxed(p->dbt[0], p->base + DMA_DBTA); + writel_relaxed(p->dbs[1], p->base + DMA_DBSB); + writel_relaxed(p->dbt[1], p->base + DMA_DBTB); + writel_relaxed(p->dcsr, p->base + DMA_DCSR_S); + } + + return 0; +} +#endif + +static const struct dev_pm_ops sa11x0_dma_pm_ops = { + .suspend_noirq = sa11x0_dma_suspend, + .resume_noirq = sa11x0_dma_resume, + .freeze_noirq = sa11x0_dma_suspend, + .thaw_noirq = sa11x0_dma_resume, + .poweroff_noirq = sa11x0_dma_suspend, + .restore_noirq = sa11x0_dma_resume, +}; + +static struct platform_driver sa11x0_dma_driver = { + .driver = { + .name = "sa11x0-dma", + .owner = THIS_MODULE, + .pm = &sa11x0_dma_pm_ops, + }, + .probe = sa11x0_dma_probe, + .remove = __devexit_p(sa11x0_dma_remove), +}; + +bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param) +{ + if (chan->device->dev->driver == &sa11x0_dma_driver.driver) { + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + const char *p = param; + + return !strcmp(c->name, p); + } + return false; +} +EXPORT_SYMBOL(sa11x0_dma_filter_fn); + +static int __init sa11x0_dma_init(void) +{ + return platform_driver_register(&sa11x0_dma_driver); +} +subsys_initcall(sa11x0_dma_init); + +static void __exit sa11x0_dma_exit(void) +{ + platform_driver_unregister(&sa11x0_dma_driver); +} +module_exit(sa11x0_dma_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("SA-11x0 DMA driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sa11x0-dma"); diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 812fd76..19d7a8d 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -30,6 +30,8 @@ #include <linux/kdebug.h> #include <linux/spinlock.h> #include <linux/rculist.h> + +#include "dmaengine.h" #include "shdma.h" /* DMA descriptor control */ @@ -296,13 +298,7 @@ static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx) else power_up = false; - cookie = sh_chan->common.cookie; - cookie++; - if (cookie < 0) - cookie = 1; - - sh_chan->common.cookie = cookie; - tx->cookie = cookie; + cookie = dma_cookie_assign(tx); /* Mark all chunks of this descriptor as submitted, move to the queue */ list_for_each_entry_safe(chunk, c, desc->node.prev, node) { @@ -673,7 +669,8 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy( static struct dma_async_tx_descriptor *sh_dmae_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, + void *context) { struct sh_dmae_slave *param; struct sh_dmae_chan *sh_chan; @@ -764,12 +761,12 @@ static dma_async_tx_callback __ld_cleanup(struct sh_dmae_chan *sh_chan, bool all cookie = tx->cookie; if (desc->mark == DESC_COMPLETED && desc->chunks == 1) { - if (sh_chan->completed_cookie != desc->cookie - 1) + if (sh_chan->common.completed_cookie != desc->cookie - 1) dev_dbg(sh_chan->dev, "Completing cookie %d, expected %d\n", desc->cookie, - sh_chan->completed_cookie + 1); - sh_chan->completed_cookie = desc->cookie; + sh_chan->common.completed_cookie + 1); + sh_chan->common.completed_cookie = desc->cookie; } /* Call callback on the last chunk */ @@ -823,7 +820,7 @@ static dma_async_tx_callback __ld_cleanup(struct sh_dmae_chan *sh_chan, bool all * Terminating and the loop completed normally: forgive * uncompleted cookies */ - sh_chan->completed_cookie = sh_chan->common.cookie; + sh_chan->common.completed_cookie = sh_chan->common.cookie; spin_unlock_irqrestore(&sh_chan->desc_lock, flags); @@ -883,23 +880,14 @@ static enum dma_status sh_dmae_tx_status(struct dma_chan *chan, struct dma_tx_state *txstate) { struct sh_dmae_chan *sh_chan = to_sh_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; enum dma_status status; unsigned long flags; sh_dmae_chan_ld_cleanup(sh_chan, false); - /* First read completed cookie to avoid a skew */ - last_complete = sh_chan->completed_cookie; - rmb(); - last_used = chan->cookie; - BUG_ON(last_complete < 0); - dma_set_tx_state(txstate, last_complete, last_used, 0); - spin_lock_irqsave(&sh_chan->desc_lock, flags); - status = dma_async_is_complete(cookie, last_complete, last_used); + status = dma_cookie_status(chan, cookie, txstate); /* * If we don't find cookie on the queue, it has been aborted and we have @@ -1102,6 +1090,7 @@ static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id, /* reference struct dma_device */ new_sh_chan->common.device = &shdev->common; + dma_cookie_init(&new_sh_chan->common); new_sh_chan->dev = shdev->common.dev; new_sh_chan->id = id; diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h index 2b55a27..0b1d2c1 100644 --- a/drivers/dma/shdma.h +++ b/drivers/dma/shdma.h @@ -30,7 +30,6 @@ enum dmae_pm_state { }; struct sh_dmae_chan { - dma_cookie_t completed_cookie; /* The maximum cookie completed */ spinlock_t desc_lock; /* Descriptor operation lock */ struct list_head ld_queue; /* Link descriptors queue */ struct list_head ld_free; /* Link descriptors free */ diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c index 2333810..434ad31 100644 --- a/drivers/dma/sirf-dma.c +++ b/drivers/dma/sirf-dma.c @@ -18,6 +18,8 @@ #include <linux/of_platform.h> #include <linux/sirfsoc_dma.h> +#include "dmaengine.h" + #define SIRFSOC_DMA_DESCRIPTORS 16 #define SIRFSOC_DMA_CHANNELS 16 @@ -59,7 +61,6 @@ struct sirfsoc_dma_chan { struct list_head queued; struct list_head active; struct list_head completed; - dma_cookie_t completed_cookie; unsigned long happened_cyclic; unsigned long completed_cyclic; @@ -208,7 +209,7 @@ static void sirfsoc_dma_process_completed(struct sirfsoc_dma *sdma) /* Free descriptors */ spin_lock_irqsave(&schan->lock, flags); list_splice_tail_init(&list, &schan->free); - schan->completed_cookie = last_cookie; + schan->chan.completed_cookie = last_cookie; spin_unlock_irqrestore(&schan->lock, flags); } else { /* for cyclic channel, desc is always in active list */ @@ -258,13 +259,7 @@ static dma_cookie_t sirfsoc_dma_tx_submit(struct dma_async_tx_descriptor *txd) /* Move descriptor to queue */ list_move_tail(&sdesc->node, &schan->queued); - /* Update cookie */ - cookie = schan->chan.cookie + 1; - if (cookie <= 0) - cookie = 1; - - schan->chan.cookie = cookie; - sdesc->desc.cookie = cookie; + cookie = dma_cookie_assign(txd); spin_unlock_irqrestore(&schan->lock, flags); @@ -414,16 +409,13 @@ sirfsoc_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, { struct sirfsoc_dma_chan *schan = dma_chan_to_sirfsoc_dma_chan(chan); unsigned long flags; - dma_cookie_t last_used; - dma_cookie_t last_complete; + enum dma_status ret; spin_lock_irqsave(&schan->lock, flags); - last_used = schan->chan.cookie; - last_complete = schan->completed_cookie; + ret = dma_cookie_status(chan, cookie, txstate); spin_unlock_irqrestore(&schan->lock, flags); - dma_set_tx_state(txstate, last_complete, last_used, 0); - return dma_async_is_complete(cookie, last_complete, last_used); + return ret; } static struct dma_async_tx_descriptor *sirfsoc_dma_prep_interleaved( @@ -497,7 +489,7 @@ err_dir: static struct dma_async_tx_descriptor * sirfsoc_dma_prep_cyclic(struct dma_chan *chan, dma_addr_t addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction) + enum dma_transfer_direction direction, void *context) { struct sirfsoc_dma_chan *schan = dma_chan_to_sirfsoc_dma_chan(chan); struct sirfsoc_dma_desc *sdesc = NULL; @@ -635,8 +627,7 @@ static int __devinit sirfsoc_dma_probe(struct platform_device *op) schan = &sdma->channels[i]; schan->chan.device = dma; - schan->chan.cookie = 1; - schan->completed_cookie = schan->chan.cookie; + dma_cookie_init(&schan->chan); INIT_LIST_HEAD(&schan->free); INIT_LIST_HEAD(&schan->prepared); diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index cc5ecbc..bdd41d4 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -21,6 +21,7 @@ #include <plat/ste_dma40.h> +#include "dmaengine.h" #include "ste_dma40_ll.h" #define D40_NAME "dma40" @@ -220,8 +221,6 @@ struct d40_base; * * @lock: A spinlock to protect this struct. * @log_num: The logical number, if any of this channel. - * @completed: Starts with 1, after first interrupt it is set to dma engine's - * current cookie. * @pending_tx: The number of pending transfers. Used between interrupt handler * and tasklet. * @busy: Set to true when transfer is ongoing on this channel. @@ -250,8 +249,6 @@ struct d40_base; struct d40_chan { spinlock_t lock; int log_num; - /* ID of the most recent completed transfer */ - int completed; int pending_tx; bool busy; struct d40_phy_res *phy_chan; @@ -1223,21 +1220,14 @@ static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) chan); struct d40_desc *d40d = container_of(tx, struct d40_desc, txd); unsigned long flags; + dma_cookie_t cookie; spin_lock_irqsave(&d40c->lock, flags); - - d40c->chan.cookie++; - - if (d40c->chan.cookie < 0) - d40c->chan.cookie = 1; - - d40d->txd.cookie = d40c->chan.cookie; - + cookie = dma_cookie_assign(tx); d40_desc_queue(d40c, d40d); - spin_unlock_irqrestore(&d40c->lock, flags); - return tx->cookie; + return cookie; } static int d40_start(struct d40_chan *d40c) @@ -1357,7 +1347,7 @@ static void dma_tasklet(unsigned long data) goto err; if (!d40d->cyclic) - d40c->completed = d40d->txd.cookie; + dma_cookie_complete(&d40d->txd); /* * If terminating a channel pending_tx is set to zero. @@ -2182,7 +2172,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) bool is_free_phy; spin_lock_irqsave(&d40c->lock, flags); - d40c->completed = chan->cookie = 1; + dma_cookie_init(chan); /* If no dma configuration is set use default configuration (memcpy) */ if (!d40c->configured) { @@ -2299,7 +2289,8 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long dma_flags) + unsigned long dma_flags, + void *context) { if (direction != DMA_DEV_TO_MEM && direction != DMA_MEM_TO_DEV) return NULL; @@ -2310,7 +2301,7 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan, static struct dma_async_tx_descriptor * dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction) + enum dma_transfer_direction direction, void *context) { unsigned int periods = buf_len / period_len; struct dma_async_tx_descriptor *txd; @@ -2342,25 +2333,19 @@ static enum dma_status d40_tx_status(struct dma_chan *chan, struct dma_tx_state *txstate) { struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; - int ret; + enum dma_status ret; if (d40c->phy_chan == NULL) { chan_err(d40c, "Cannot read status of unallocated channel\n"); return -EINVAL; } - last_complete = d40c->completed; - last_used = chan->cookie; + ret = dma_cookie_status(chan, cookie, txstate); + if (ret != DMA_SUCCESS) + dma_set_residue(txstate, stedma40_residue(chan)); if (d40_is_paused(d40c)) ret = DMA_PAUSED; - else - ret = dma_async_is_complete(cookie, last_complete, last_used); - - dma_set_tx_state(txstate, last_complete, last_used, - stedma40_residue(chan)); return ret; } diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c index a6f9c16..4e0dff5 100644 --- a/drivers/dma/timb_dma.c +++ b/drivers/dma/timb_dma.c @@ -31,6 +31,8 @@ #include <linux/timb_dma.h> +#include "dmaengine.h" + #define DRIVER_NAME "timb-dma" /* Global DMA registers */ @@ -84,7 +86,6 @@ struct timb_dma_chan { especially the lists and descriptors, from races between the tasklet and calls from above */ - dma_cookie_t last_completed_cookie; bool ongoing; struct list_head active_list; struct list_head queue; @@ -284,7 +285,7 @@ static void __td_finish(struct timb_dma_chan *td_chan) else iowrite32(0, td_chan->membase + TIMBDMA_OFFS_TX_DLAR); */ - td_chan->last_completed_cookie = txd->cookie; + dma_cookie_complete(txd); td_chan->ongoing = false; callback = txd->callback; @@ -349,12 +350,7 @@ static dma_cookie_t td_tx_submit(struct dma_async_tx_descriptor *txd) dma_cookie_t cookie; spin_lock_bh(&td_chan->lock); - - cookie = txd->chan->cookie; - if (++cookie < 0) - cookie = 1; - txd->chan->cookie = cookie; - txd->cookie = cookie; + cookie = dma_cookie_assign(txd); if (list_empty(&td_chan->active_list)) { dev_dbg(chan2dev(txd->chan), "%s: started %u\n", __func__, @@ -481,8 +477,7 @@ static int td_alloc_chan_resources(struct dma_chan *chan) } spin_lock_bh(&td_chan->lock); - td_chan->last_completed_cookie = 1; - chan->cookie = 1; + dma_cookie_init(chan); spin_unlock_bh(&td_chan->lock); return 0; @@ -515,24 +510,13 @@ static void td_free_chan_resources(struct dma_chan *chan) static enum dma_status td_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - struct timb_dma_chan *td_chan = - container_of(chan, struct timb_dma_chan, chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; - int ret; + enum dma_status ret; dev_dbg(chan2dev(chan), "%s: Entry\n", __func__); - last_complete = td_chan->last_completed_cookie; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_complete, last_used); - - dma_set_tx_state(txstate, last_complete, last_used, 0); + ret = dma_cookie_status(chan, cookie, txstate); - dev_dbg(chan2dev(chan), - "%s: exit, ret: %d, last_complete: %d, last_used: %d\n", - __func__, ret, last_complete, last_used); + dev_dbg(chan2dev(chan), "%s: exit, ret: %d\n", __func__, ret); return ret; } @@ -558,7 +542,8 @@ static void td_issue_pending(struct dma_chan *chan) static struct dma_async_tx_descriptor *td_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, + void *context) { struct timb_dma_chan *td_chan = container_of(chan, struct timb_dma_chan, chan); @@ -766,7 +751,7 @@ static int __devinit td_probe(struct platform_device *pdev) } td_chan->chan.device = &td->dma; - td_chan->chan.cookie = 1; + dma_cookie_init(&td_chan->chan); spin_lock_init(&td_chan->lock); INIT_LIST_HEAD(&td_chan->active_list); INIT_LIST_HEAD(&td_chan->queue); diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c index 6122c36..913f55c 100644 --- a/drivers/dma/txx9dmac.c +++ b/drivers/dma/txx9dmac.c @@ -15,6 +15,8 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/scatterlist.h> + +#include "dmaengine.h" #include "txx9dmac.h" static struct txx9dmac_chan *to_txx9dmac_chan(struct dma_chan *chan) @@ -279,21 +281,6 @@ static void txx9dmac_desc_put(struct txx9dmac_chan *dc, } } -/* Called with dc->lock held and bh disabled */ -static dma_cookie_t -txx9dmac_assign_cookie(struct txx9dmac_chan *dc, struct txx9dmac_desc *desc) -{ - dma_cookie_t cookie = dc->chan.cookie; - - if (++cookie < 0) - cookie = 1; - - dc->chan.cookie = cookie; - desc->txd.cookie = cookie; - - return cookie; -} - /*----------------------------------------------------------------------*/ static void txx9dmac_dump_regs(struct txx9dmac_chan *dc) @@ -424,7 +411,7 @@ txx9dmac_descriptor_complete(struct txx9dmac_chan *dc, dev_vdbg(chan2dev(&dc->chan), "descriptor %u %p complete\n", txd->cookie, desc); - dc->completed = txd->cookie; + dma_cookie_complete(txd); callback = txd->callback; param = txd->callback_param; @@ -738,7 +725,7 @@ static dma_cookie_t txx9dmac_tx_submit(struct dma_async_tx_descriptor *tx) dma_cookie_t cookie; spin_lock_bh(&dc->lock); - cookie = txx9dmac_assign_cookie(dc, desc); + cookie = dma_cookie_assign(tx); dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u %p\n", desc->txd.cookie, desc); @@ -846,7 +833,7 @@ txx9dmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, static struct dma_async_tx_descriptor * txx9dmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct txx9dmac_chan *dc = to_txx9dmac_chan(chan); struct txx9dmac_dev *ddev = dc->ddev; @@ -972,27 +959,17 @@ txx9dmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct txx9dmac_chan *dc = to_txx9dmac_chan(chan); - dma_cookie_t last_used; - dma_cookie_t last_complete; - int ret; + enum dma_status ret; - last_complete = dc->completed; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); if (ret != DMA_SUCCESS) { spin_lock_bh(&dc->lock); txx9dmac_scan_descriptors(dc); spin_unlock_bh(&dc->lock); - last_complete = dc->completed; - last_used = chan->cookie; - - ret = dma_async_is_complete(cookie, last_complete, last_used); + ret = dma_cookie_status(chan, cookie, txstate); } - dma_set_tx_state(txstate, last_complete, last_used, 0); - return ret; } @@ -1057,7 +1034,7 @@ static int txx9dmac_alloc_chan_resources(struct dma_chan *chan) return -EIO; } - dc->completed = chan->cookie = 1; + dma_cookie_init(chan); dc->ccr = TXX9_DMA_CCR_IMMCHN | TXX9_DMA_CCR_INTENE | CCR_LE; txx9dmac_chan_set_SMPCHN(dc); @@ -1186,7 +1163,7 @@ static int __init txx9dmac_chan_probe(struct platform_device *pdev) dc->ddev->chan[ch] = dc; dc->chan.device = &dc->dma; list_add_tail(&dc->chan.device_node, &dc->chan.device->channels); - dc->chan.cookie = dc->completed = 1; + dma_cookie_init(&dc->chan); if (is_dmac64(dc)) dc->ch_regs = &__txx9dmac_regs(dc->ddev)->CHAN[ch]; diff --git a/drivers/dma/txx9dmac.h b/drivers/dma/txx9dmac.h index 365d423..f5a7605 100644 --- a/drivers/dma/txx9dmac.h +++ b/drivers/dma/txx9dmac.h @@ -172,7 +172,6 @@ struct txx9dmac_chan { spinlock_t lock; /* these other elements are all protected by lock */ - dma_cookie_t completed; struct list_head active_list; struct list_head queue; struct list_head free_list; diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 5948a21..fdffa1b 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -215,7 +215,7 @@ config EDAC_I7300 config EDAC_SBRIDGE tristate "Intel Sandy-Bridge Integrated MC" depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL - depends on EXPERIMENTAL + depends on PCI_MMCONFIG && EXPERIMENTAL help Support for error detection and correction the Intel Sandy Bridge Integrated Memory Controller. diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index da09cd7..feef773 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -39,7 +39,7 @@ static LIST_HEAD(mc_devices); #ifdef CONFIG_EDAC_DEBUG -static void edac_mc_dump_channel(struct channel_info *chan) +static void edac_mc_dump_channel(struct rank_info *chan) { debugf4("\tchannel = %p\n", chan); debugf4("\tchannel->chan_idx = %d\n", chan->chan_idx); @@ -156,7 +156,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, { struct mem_ctl_info *mci; struct csrow_info *csi, *csrow; - struct channel_info *chi, *chp, *chan; + struct rank_info *chi, *chp, *chan; void *pvt; unsigned size; int row, chn; @@ -181,7 +181,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, * rather than an imaginary chunk of memory located at address 0. */ csi = (struct csrow_info *)(((char *)mci) + ((unsigned long)csi)); - chi = (struct channel_info *)(((char *)mci) + ((unsigned long)chi)); + chi = (struct rank_info *)(((char *)mci) + ((unsigned long)chi)); pvt = sz_pvt ? (((char *)mci) + ((unsigned long)pvt)) : NULL; /* setup index and various internal pointers */ diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c index 2e23547..d500749 100644 --- a/drivers/edac/i5100_edac.c +++ b/drivers/edac/i5100_edac.c @@ -49,7 +49,7 @@ #define I5100_FERR_NF_MEM_M6ERR_MASK (1 << 6) #define I5100_FERR_NF_MEM_M5ERR_MASK (1 << 5) #define I5100_FERR_NF_MEM_M4ERR_MASK (1 << 4) -#define I5100_FERR_NF_MEM_M1ERR_MASK 1 +#define I5100_FERR_NF_MEM_M1ERR_MASK (1 << 1) #define I5100_FERR_NF_MEM_ANY_MASK \ (I5100_FERR_NF_MEM_M16ERR_MASK | \ I5100_FERR_NF_MEM_M15ERR_MASK | \ @@ -535,23 +535,20 @@ static void i5100_read_log(struct mem_ctl_info *mci, int chan, static void i5100_check_error(struct mem_ctl_info *mci) { struct i5100_priv *priv = mci->pvt_info; - u32 dw; - + u32 dw, dw2; pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw); if (i5100_ferr_nf_mem_any(dw)) { - u32 dw2; pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2); - if (dw2) - pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM, - dw2); - pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw); i5100_read_log(mci, i5100_ferr_nf_mem_chan_indx(dw), i5100_ferr_nf_mem_any(dw), i5100_nerr_nf_mem_any(dw2)); + + pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM, dw2); } + pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw); } /* The i5100 chipset will scrub the entire memory once, then diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c index 67ec962..1869a10 100644 --- a/drivers/edac/i5400_edac.c +++ b/drivers/edac/i5400_edac.c @@ -735,7 +735,7 @@ static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx) /* Attempt to 'get' the MCH register we want */ pdev = NULL; - while (!pvt->branchmap_werrors || !pvt->fsb_error_regs) { + while (1) { pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR, pdev); if (!pdev) { @@ -743,23 +743,42 @@ static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx) i5400_printk(KERN_ERR, "'system address,Process Bus' " "device not found:" - "vendor 0x%x device 0x%x ERR funcs " + "vendor 0x%x device 0x%x ERR func 1 " "(broken BIOS?)\n", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR); - goto error; + return -ENODEV; } - /* Store device 16 funcs 1 and 2 */ - switch (PCI_FUNC(pdev->devfn)) { - case 1: - pvt->branchmap_werrors = pdev; - break; - case 2: - pvt->fsb_error_regs = pdev; + /* Store device 16 func 1 */ + if (PCI_FUNC(pdev->devfn) == 1) break; + } + pvt->branchmap_werrors = pdev; + + pdev = NULL; + while (1) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_ERR, pdev); + if (!pdev) { + /* End of list, leave */ + i5400_printk(KERN_ERR, + "'system address,Process Bus' " + "device not found:" + "vendor 0x%x device 0x%x ERR func 2 " + "(broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_ERR); + + pci_dev_put(pvt->branchmap_werrors); + return -ENODEV; } + + /* Store device 16 func 2 */ + if (PCI_FUNC(pdev->devfn) == 2) + break; } + pvt->fsb_error_regs = pdev; debugf1("System Address, processor bus- PCI Bus ID: %s %x:%x\n", pci_name(pvt->system_address), @@ -778,7 +797,10 @@ static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx) "MC: 'BRANCH 0' device not found:" "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_FBD0); - goto error; + + pci_dev_put(pvt->fsb_error_regs); + pci_dev_put(pvt->branchmap_werrors); + return -ENODEV; } /* If this device claims to have more than 2 channels then @@ -796,14 +818,14 @@ static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx) "(broken BIOS?)\n", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_FBD1); - goto error; + + pci_dev_put(pvt->branch_0); + pci_dev_put(pvt->fsb_error_regs); + pci_dev_put(pvt->branchmap_werrors); + return -ENODEV; } return 0; - -error: - i5400_put_devices(mci); - return -ENODEV; } /* diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c index fc75706..d427c69 100644 --- a/drivers/edac/ppc4xx_edac.c +++ b/drivers/edac/ppc4xx_edac.c @@ -184,7 +184,7 @@ struct ppc4xx_ecc_status { /* Function Prototypes */ -static int ppc4xx_edac_probe(struct platform_device *device) +static int ppc4xx_edac_probe(struct platform_device *device); static int ppc4xx_edac_remove(struct platform_device *device); /* Global Variables */ @@ -1068,7 +1068,7 @@ ppc4xx_edac_mc_init(struct mem_ctl_info *mci, mci->mod_name = PPC4XX_EDAC_MODULE_NAME; mci->mod_ver = PPC4XX_EDAC_MODULE_REVISION; - mci->ctl_name = match->compatible, + mci->ctl_name = ppc4xx_edac_match->compatible, mci->dev_name = np->full_name; /* Initialize callbacks */ diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 3a605f7..a203536 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -20,6 +20,7 @@ #include <linux/mmzone.h> #include <linux/smp.h> #include <linux/bitmap.h> +#include <linux/math64.h> #include <asm/processor.h> #include <asm/mce.h> @@ -670,6 +671,7 @@ static void get_memory_layout(const struct mem_ctl_info *mci) u32 reg; u64 limit, prv = 0; u64 tmp_mb; + u32 mb, kb; u32 rir_way; /* @@ -682,8 +684,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci) pvt->tolm = GET_TOLM(reg); tmp_mb = (1 + pvt->tolm) >> 20; - debugf0("TOLM: %Lu.%03Lu GB (0x%016Lx)\n", - tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tolm); + mb = div_u64_rem(tmp_mb, 1000, &kb); + debugf0("TOLM: %u.%03u GB (0x%016Lx)\n", + mb, kb, (u64)pvt->tolm); /* Address range is already 45:25 */ pci_read_config_dword(pvt->pci_sad1, TOHM, @@ -691,8 +694,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci) pvt->tohm = GET_TOHM(reg); tmp_mb = (1 + pvt->tohm) >> 20; - debugf0("TOHM: %Lu.%03Lu GB (0x%016Lx)", - tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tohm); + mb = div_u64_rem(tmp_mb, 1000, &kb); + debugf0("TOHM: %u.%03u GB (0x%016Lx)", + mb, kb, (u64)pvt->tohm); /* * Step 2) Get SAD range and SAD Interleave list @@ -714,10 +718,11 @@ static void get_memory_layout(const struct mem_ctl_info *mci) break; tmp_mb = (limit + 1) >> 20; - debugf0("SAD#%d %s up to %Lu.%03Lu GB (0x%016Lx) %s reg=0x%08x\n", + mb = div_u64_rem(tmp_mb, 1000, &kb); + debugf0("SAD#%d %s up to %u.%03u GB (0x%016Lx) %s reg=0x%08x\n", n_sads, get_dram_attr(reg), - tmp_mb / 1000, tmp_mb % 1000, + mb, kb, ((u64)tmp_mb) << 20L, INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]", reg); @@ -747,8 +752,9 @@ static void get_memory_layout(const struct mem_ctl_info *mci) break; tmp_mb = (limit + 1) >> 20; - debugf0("TAD#%d: up to %Lu.%03Lu GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n", - n_tads, tmp_mb / 1000, tmp_mb % 1000, + mb = div_u64_rem(tmp_mb, 1000, &kb); + debugf0("TAD#%d: up to %u.%03u GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n", + n_tads, mb, kb, ((u64)tmp_mb) << 20L, (u32)TAD_SOCK(reg), (u32)TAD_CH(reg), @@ -757,7 +763,7 @@ static void get_memory_layout(const struct mem_ctl_info *mci) (u32)TAD_TGT2(reg), (u32)TAD_TGT3(reg), reg); - prv = tmp_mb; + prv = limit; } /* @@ -771,9 +777,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci) tad_ch_nilv_offset[j], ®); tmp_mb = TAD_OFFSET(reg) >> 20; - debugf0("TAD CH#%d, offset #%d: %Lu.%03Lu GB (0x%016Lx), reg=0x%08x\n", + mb = div_u64_rem(tmp_mb, 1000, &kb); + debugf0("TAD CH#%d, offset #%d: %u.%03u GB (0x%016Lx), reg=0x%08x\n", i, j, - tmp_mb / 1000, tmp_mb % 1000, + mb, kb, ((u64)tmp_mb) << 20L, reg); } @@ -795,9 +802,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci) tmp_mb = RIR_LIMIT(reg) >> 20; rir_way = 1 << RIR_WAY(reg); - debugf0("CH#%d RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d, reg=0x%08x\n", + mb = div_u64_rem(tmp_mb, 1000, &kb); + debugf0("CH#%d RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d, reg=0x%08x\n", i, j, - tmp_mb / 1000, tmp_mb % 1000, + mb, kb, ((u64)tmp_mb) << 20L, rir_way, reg); @@ -808,9 +816,10 @@ static void get_memory_layout(const struct mem_ctl_info *mci) ®); tmp_mb = RIR_OFFSET(reg) << 6; - debugf0("CH#%d RIR#%d INTL#%d, offset %Lu.%03Lu GB (0x%016Lx), tgt: %d, reg=0x%08x\n", + mb = div_u64_rem(tmp_mb, 1000, &kb); + debugf0("CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n", i, j, k, - tmp_mb / 1000, tmp_mb % 1000, + mb, kb, ((u64)tmp_mb) << 20L, (u32)RIR_RNK_TGT(reg), reg); @@ -848,6 +857,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, u8 ch_way,sck_way; u32 tad_offset; u32 rir_way; + u32 mb, kb; u64 ch_addr, offset, limit, prv = 0; @@ -858,7 +868,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, * range (e. g. VGA addresses). It is unlikely, however, that the * memory controller would generate an error on that range. */ - if ((addr > (u64) pvt->tolm) && (addr < (1L << 32))) { + if ((addr > (u64) pvt->tolm) && (addr < (1LL << 32))) { sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr); edac_mc_handle_ce_no_info(mci, msg); return -EINVAL; @@ -913,7 +923,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, addr, limit, sad_way + 7, - INTERLEAVE_MODE(reg) ? "" : "XOR[18:16]"); + interleave_mode ? "" : "XOR[18:16]"); if (interleave_mode) idx = ((addr >> 6) ^ (addr >> 16)) & 7; else @@ -1053,7 +1063,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci, ch_addr = addr & 0x7f; /* Remove socket wayness and remove 6 bits */ addr >>= 6; - addr /= sck_xch; + addr = div_u64(addr, sck_xch); #if 0 /* Divide by channel way */ addr = addr / ch_way; @@ -1073,10 +1083,10 @@ static int get_memory_error_data(struct mem_ctl_info *mci, continue; limit = RIR_LIMIT(reg); - - debugf0("RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d\n", + mb = div_u64_rem(limit >> 20, 1000, &kb); + debugf0("RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d\n", n_rir, - (limit >> 20) / 1000, (limit >> 20) % 1000, + mb, kb, limit, 1 << RIR_WAY(reg)); if (ch_addr <= limit) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index 22c6df5..2e6b245 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -44,7 +44,6 @@ #include <linux/wait.h> #include <linux/workqueue.h> -#include <asm/system.h> #include "core.h" diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c index afa7c83..68109e9 100644 --- a/drivers/firewire/core-device.c +++ b/drivers/firewire/core-device.c @@ -40,7 +40,6 @@ #include <linux/atomic.h> #include <asm/byteorder.h> -#include <asm/system.h> #include "core.h" diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index 255646f..0de8350 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -31,7 +31,6 @@ #include <linux/atomic.h> #include <asm/byteorder.h> -#include <asm/system.h> #include "core.h" diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 187b3f2..2b54600 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -46,7 +46,6 @@ #include <asm/byteorder.h> #include <asm/page.h> -#include <asm/system.h> #ifdef CONFIG_PPC_PMAC #include <asm/pmac_feature.h> diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 000a29f..b7e65d7 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -52,7 +52,6 @@ #include <linux/workqueue.h> #include <asm/byteorder.h> -#include <asm/system.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0409cf3..edadbda 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -236,6 +236,12 @@ config GPIO_MAX732X_IRQ Say yes here to enable the max732x to be used as an interrupt controller. It requires the driver to be built in the kernel. +config GPIO_MC9S08DZ60 + bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" + depends on I2C && MACH_MX35_3DS + help + Select this to enable the MC9S08DZ60 GPIO driver + config GPIO_PCA953X tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports" depends on I2C @@ -422,6 +428,14 @@ config GPIO_ML_IOH Hub) which is for IVI(In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. +config GPIO_SODAVILLE + bool "Intel Sodaville GPIO support" + depends on X86 && PCI && OF && BROKEN + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + help + Say Y here to support Intel Sodaville GPIO. + config GPIO_TIMBERDALE bool "Support for timberdale GPIO IP" depends on MFD_TIMBERDALE && HAS_IOMEM diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9a8fb54..007f54b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o +obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o @@ -46,6 +47,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o +obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index df0d595..3d00016 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -313,10 +313,16 @@ static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) return -ENODEV; } -static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger) +static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger) { - struct davinci_gpio_regs __iomem *g = irq2regs(d->irq); - u32 mask = (u32) irq_data_get_irq_handler_data(d); + struct davinci_gpio_controller *d; + struct davinci_gpio_regs __iomem *g; + struct davinci_soc_info *soc_info = &davinci_soc_info; + u32 mask; + + d = (struct davinci_gpio_controller *)data->handler_data; + g = (struct davinci_gpio_regs __iomem *)d->regs; + mask = __gpio_mask(data->irq - soc_info->gpio_irq); if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) return -EINVAL; @@ -380,7 +386,7 @@ static int __init davinci_gpio_irq_setup(void) * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. */ if (soc_info->gpio_unbanked) { - static struct irq_chip gpio_irqchip_unbanked; + static struct irq_chip_type gpio_unbanked; /* pass "bank 0" GPIO IRQs to AINTC */ chips[0].chip.to_irq = gpio_to_irq_unbanked; @@ -388,9 +394,10 @@ static int __init davinci_gpio_irq_setup(void) /* AINTC handles mask/unmask; GPIO handles triggering */ irq = bank_irq; - gpio_irqchip_unbanked = *irq_get_chip(irq); - gpio_irqchip_unbanked.name = "GPIO-AINTC"; - gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked; + gpio_unbanked = *container_of(irq_get_chip(irq), + struct irq_chip_type, chip); + gpio_unbanked.chip.name = "GPIO-AINTC"; + gpio_unbanked.chip.irq_set_type = gpio_irq_type_unbanked; /* default trigger: both edges */ g = gpio2regs(0); @@ -399,9 +406,8 @@ static int __init davinci_gpio_irq_setup(void) /* set the direct IRQs up to use that irqchip */ for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) { - irq_set_chip(irq, &gpio_irqchip_unbanked); - irq_set_handler_data(irq, (void *)__gpio_mask(gpio)); - irq_set_chip_data(irq, (__force void *)g); + irq_set_chip(irq, &gpio_unbanked.chip); + irq_set_handler_data(irq, &chips[gpio / 32]); irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH); } diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c index 4ca5642..776b772 100644 --- a/drivers/gpio/gpio-ep93xx.c +++ b/drivers/gpio/gpio-ep93xx.c @@ -12,8 +12,6 @@ * published by the Free Software Foundation. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include <linux/init.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -65,11 +63,6 @@ static void ep93xx_gpio_update_int_params(unsigned port) EP93XX_GPIO_REG(int_en_register_offset[port])); } -static inline void ep93xx_gpio_int_mask(unsigned line) -{ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); -} - static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) { int line = irq_to_gpio(irq); @@ -212,7 +205,6 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) handler = handle_edge_irq; break; default: - pr_err("failed to set irq type %d for gpio %d\n", type, gpio); return -EINVAL; } diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index ddfacc5..61c2d08 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -59,12 +59,14 @@ #define GPO3_PIN_TO_BIT(x) (1 << (x)) #define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) #define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x)) -#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y)) +#define GPIO3_PIN_IN_SEL(x, y) (((x) >> GPIO3_PIN_IN_SHIFT(y)) & 1) #define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1) #define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) +#define GPO3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1) struct gpio_regs { void __iomem *inp_state; + void __iomem *outp_state; void __iomem *outp_set; void __iomem *outp_clr; void __iomem *dir_set; @@ -145,6 +147,7 @@ static struct gpio_regs gpio_grp_regs_p2 = { static struct gpio_regs gpio_grp_regs_p3 = { .inp_state = LPC32XX_GPIO_P3_INP_STATE, + .outp_state = LPC32XX_GPIO_P3_OUTP_STATE, .outp_set = LPC32XX_GPIO_P3_OUTP_SET, .outp_clr = LPC32XX_GPIO_P3_OUTP_CLR, .dir_set = LPC32XX_GPIO_P2_DIR_SET, @@ -240,6 +243,12 @@ static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group, return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin); } +static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group, + unsigned pin) +{ + return GPO3_PIN_IN_SEL(__raw_readl(group->gpio_grp->outp_state), pin); +} + /* * GENERIC_GPIO primitives. */ @@ -340,6 +349,13 @@ static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin, __set_gpo_level_p3(group, pin, value); } +static int lpc32xx_gpo_get_value(struct gpio_chip *chip, unsigned pin) +{ + struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip); + + return __get_gpo_state_p3(group, pin); +} + static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin) { if (pin < chip->ngpio) @@ -427,6 +443,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = { .label = "gpo_p3", .direction_output = lpc32xx_gpio_dir_out_always, .set = lpc32xx_gpo_set_value, + .get = lpc32xx_gpo_get_value, .request = lpc32xx_gpio_request, .base = LPC32XX_GPO_P3_GRP, .ngpio = LPC32XX_GPO_P3_MAX, diff --git a/drivers/gpio/gpio-mc9s08dz60.c b/drivers/gpio/gpio-mc9s08dz60.c new file mode 100644 index 0000000..2738cc4 --- /dev/null +++ b/drivers/gpio/gpio-mc9s08dz60.c @@ -0,0 +1,161 @@ +/* + * Copyright 2009-2012 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Author: Wu Guoxing <b39297@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/gpio.h> + +#define GPIO_GROUP_NUM 2 +#define GPIO_NUM_PER_GROUP 8 +#define GPIO_NUM (GPIO_GROUP_NUM*GPIO_NUM_PER_GROUP) + +struct mc9s08dz60 { + struct i2c_client *client; + struct gpio_chip chip; +}; + +static inline struct mc9s08dz60 *to_mc9s08dz60(struct gpio_chip *gc) +{ + return container_of(gc, struct mc9s08dz60, chip); +} + + +static void mc9s_gpio_to_reg_and_bit(int offset, u8 *reg, u8 *bit) +{ + *reg = 0x20 + offset / GPIO_NUM_PER_GROUP; + *bit = offset % GPIO_NUM_PER_GROUP; +} + +static int mc9s08dz60_get_value(struct gpio_chip *gc, unsigned offset) +{ + u8 reg, bit; + s32 value; + struct mc9s08dz60 *mc9s = to_mc9s08dz60(gc); + + mc9s_gpio_to_reg_and_bit(offset, ®, &bit); + value = i2c_smbus_read_byte_data(mc9s->client, reg); + + return (value >= 0) ? (value >> bit) & 0x1 : 0; +} + +static int mc9s08dz60_set(struct mc9s08dz60 *mc9s, unsigned offset, int val) +{ + u8 reg, bit; + s32 value; + + mc9s_gpio_to_reg_and_bit(offset, ®, &bit); + value = i2c_smbus_read_byte_data(mc9s->client, reg); + if (value >= 0) { + if (val) + value |= 1 << bit; + else + value &= ~(1 << bit); + + return i2c_smbus_write_byte_data(mc9s->client, reg, value); + } else + return value; + +} + + +static void mc9s08dz60_set_value(struct gpio_chip *gc, unsigned offset, int val) +{ + struct mc9s08dz60 *mc9s = to_mc9s08dz60(gc); + + mc9s08dz60_set(mc9s, offset, val); +} + +static int mc9s08dz60_direction_output(struct gpio_chip *gc, + unsigned offset, int val) +{ + struct mc9s08dz60 *mc9s = to_mc9s08dz60(gc); + + return mc9s08dz60_set(mc9s, offset, val); +} + +static int mc9s08dz60_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct mc9s08dz60 *mc9s; + + mc9s = kzalloc(sizeof(*mc9s), GFP_KERNEL); + if (!mc9s) + return -ENOMEM; + + mc9s->chip.label = client->name; + mc9s->chip.base = -1; + mc9s->chip.dev = &client->dev; + mc9s->chip.owner = THIS_MODULE; + mc9s->chip.ngpio = GPIO_NUM; + mc9s->chip.can_sleep = 1; + mc9s->chip.get = mc9s08dz60_get_value; + mc9s->chip.set = mc9s08dz60_set_value; + mc9s->chip.direction_output = mc9s08dz60_direction_output; + mc9s->client = client; + i2c_set_clientdata(client, mc9s); + + ret = gpiochip_add(&mc9s->chip); + if (ret) + goto error; + + return 0; + + error: + kfree(mc9s); + return ret; +} + +static int mc9s08dz60_remove(struct i2c_client *client) +{ + struct mc9s08dz60 *mc9s; + int ret; + + mc9s = i2c_get_clientdata(client); + + ret = gpiochip_remove(&mc9s->chip); + if (!ret) + kfree(mc9s); + + return ret; + +} + +static const struct i2c_device_id mc9s08dz60_id[] = { + {"mc9s08dz60", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, mc9s08dz60_id); + +static struct i2c_driver mc9s08dz60_i2c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "mc9s08dz60", + }, + .probe = mc9s08dz60_probe, + .remove = mc9s08dz60_remove, + .id_table = mc9s08dz60_id, +}; + +module_i2c_driver(mc9s08dz60_i2c_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc. " + "Wu Guoxing <b39297@freescale.com>"); +MODULE_DESCRIPTION("mc9s08dz60 gpio function on mx35 3ds board"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index f49bd6f..1adc2ec 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -19,9 +19,12 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/slab.h> +#include <linux/device.h> #include <linux/pm_runtime.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/irqdomain.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -50,10 +53,10 @@ struct gpio_regs { struct gpio_bank { struct list_head node; - unsigned long pbase; void __iomem *base; u16 irq; - u16 virtual_irq_start; + int irq_base; + struct irq_domain *domain; u32 suspend_wakeup; u32 saved_wakeup; u32 non_wakeup_gpios; @@ -77,7 +80,6 @@ struct gpio_bank { int stride; u32 width; int context_loss_count; - u16 id; int power_mode; bool workaround_enabled; @@ -91,6 +93,11 @@ struct gpio_bank { #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio)) #define GPIO_MOD_CTRL_BIT BIT(0) +static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq) +{ + return gpio_irq - bank->irq_base + bank->chip.base; +} + static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { void __iomem *reg = bank->base; @@ -113,10 +120,13 @@ static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable) void __iomem *reg = bank->base; u32 l = GPIO_BIT(bank, gpio); - if (enable) + if (enable) { reg += bank->regs->set_dataout; - else + bank->context.dataout |= l; + } else { reg += bank->regs->clr_dataout; + bank->context.dataout &= ~l; + } __raw_writel(l, reg); } @@ -137,25 +147,25 @@ static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable) bank->context.dataout = l; } -static int _get_gpio_datain(struct gpio_bank *bank, int gpio) +static int _get_gpio_datain(struct gpio_bank *bank, int offset) { void __iomem *reg = bank->base + bank->regs->datain; - return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0; + return (__raw_readl(reg) & (1 << offset)) != 0; } -static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +static int _get_gpio_dataout(struct gpio_bank *bank, int offset) { void __iomem *reg = bank->base + bank->regs->dataout; - return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0; + return (__raw_readl(reg) & (1 << offset)) != 0; } static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) { int l = __raw_readl(base + reg); - if (set) + if (set) l |= mask; else l &= ~mask; @@ -238,7 +248,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, } static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio, - int trigger) + unsigned trigger) { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; @@ -320,7 +330,8 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {} #endif -static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, + unsigned trigger) { void __iomem *reg = bank->base; void __iomem *base = bank->base; @@ -367,7 +378,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) static int gpio_irq_type(struct irq_data *d, unsigned type) { - struct gpio_bank *bank; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); unsigned gpio; int retval; unsigned long flags; @@ -375,13 +386,11 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE) gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); else - gpio = d->irq - IH_GPIO_BASE; + gpio = irq_to_gpio(bank, d->irq); if (type & ~IRQ_TYPE_SENSE_MASK) return -EINVAL; - bank = irq_data_get_irq_chip_data(d); - if (!bank->regs->leveldetect0 && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) return -EINVAL; @@ -442,6 +451,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) if (bank->regs->set_irqenable) { reg += bank->regs->set_irqenable; l = gpio_mask; + bank->context.irqenable1 |= gpio_mask; } else { reg += bank->regs->irqenable; l = __raw_readl(reg); @@ -449,10 +459,10 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) l &= ~gpio_mask; else l |= gpio_mask; + bank->context.irqenable1 = l; } __raw_writel(l, reg); - bank->context.irqenable1 = l; } static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) @@ -463,6 +473,7 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) if (bank->regs->clr_irqenable) { reg += bank->regs->clr_irqenable; l = gpio_mask; + bank->context.irqenable1 &= ~gpio_mask; } else { reg += bank->regs->irqenable; l = __raw_readl(reg); @@ -470,15 +481,18 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) l |= gpio_mask; else l &= ~gpio_mask; + bank->context.irqenable1 = l; } __raw_writel(l, reg); - bank->context.irqenable1 = l; } static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) { - _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio)); + if (enable) + _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio)); + else + _disable_gpio_irqbank(bank, GPIO_BIT(bank, gpio)); } /* @@ -495,7 +509,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) unsigned long flags; if (bank->non_wakeup_gpios & gpio_bit) { - dev_err(bank->dev, + dev_err(bank->dev, "Unable to modify wakeup on non-wakeup GPIO%d\n", gpio); return -EINVAL; } @@ -506,6 +520,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) else bank->suspend_wakeup &= ~gpio_bit; + __raw_writel(bank->suspend_wakeup, bank->base + bank->regs->wkup_en); spin_unlock_irqrestore(&bank->lock, flags); return 0; @@ -522,14 +537,10 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ static int gpio_wake_enable(struct irq_data *d, unsigned int enable) { - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank; - int retval; - - bank = irq_data_get_irq_chip_data(d); - retval = _set_gpio_wakeup(bank, gpio, enable); + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned int gpio = irq_to_gpio(bank, d->irq); - return retval; + return _set_gpio_wakeup(bank, gpio, enable); } static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) @@ -671,13 +682,15 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (!isr) break; - gpio_irq = bank->virtual_irq_start; + gpio_irq = bank->irq_base; for (; isr != 0; isr >>= 1, gpio_irq++) { - gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq)); + int gpio = irq_to_gpio(bank, gpio_irq); if (!(isr & 1)) continue; + gpio_index = GPIO_INDEX(bank, gpio); + /* * Some chips can't respond to both rising and falling * at the same time. If this irq was requested with @@ -703,8 +716,8 @@ exit: static void gpio_irq_shutdown(struct irq_data *d) { - unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned int gpio = irq_to_gpio(bank, d->irq); unsigned long flags; spin_lock_irqsave(&bank->lock, flags); @@ -714,16 +727,16 @@ static void gpio_irq_shutdown(struct irq_data *d) static void gpio_ack_irq(struct irq_data *d) { - unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned int gpio = irq_to_gpio(bank, d->irq); _clear_gpio_irqstatus(bank, gpio); } static void gpio_mask_irq(struct irq_data *d) { - unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned int gpio = irq_to_gpio(bank, d->irq); unsigned long flags; spin_lock_irqsave(&bank->lock, flags); @@ -734,8 +747,8 @@ static void gpio_mask_irq(struct irq_data *d) static void gpio_unmask_irq(struct irq_data *d) { - unsigned int gpio = d->irq - IH_GPIO_BASE; struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned int gpio = irq_to_gpio(bank, d->irq); unsigned int irq_mask = GPIO_BIT(bank, gpio); u32 trigger = irqd_get_trigger_type(d); unsigned long flags; @@ -852,19 +865,15 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) static int gpio_get(struct gpio_chip *chip, unsigned offset) { struct gpio_bank *bank; - void __iomem *reg; - int gpio; u32 mask; - gpio = chip->base + offset; bank = container_of(chip, struct gpio_bank, chip); - reg = bank->base; - mask = GPIO_BIT(bank, gpio); + mask = (1 << offset); if (gpio_is_input(bank, mask)) - return _get_gpio_datain(bank, gpio); + return _get_gpio_datain(bank, offset); else - return _get_gpio_dataout(bank, gpio); + return _get_gpio_dataout(bank, offset); } static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) @@ -917,7 +926,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset) struct gpio_bank *bank; bank = container_of(chip, struct gpio_bank, chip); - return bank->virtual_irq_start + offset; + return bank->irq_base + offset; } /*---------------------------------------------------------------------*/ @@ -970,7 +979,7 @@ static void omap_gpio_mod_init(struct gpio_bank *bank) _gpio_rmw(base, bank->regs->ctrl, 0, 1); } -static __init void +static __devinit void omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, unsigned int num) { @@ -1030,8 +1039,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) gpiochip_add(&bank->chip); - for (j = bank->virtual_irq_start; - j < bank->virtual_irq_start + bank->width; j++) { + for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) { irq_set_lockdep_class(j, &gpio_lock_class); irq_set_chip_data(j, bank); if (bank->is_mpuio) { @@ -1046,39 +1054,38 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) irq_set_handler_data(bank->irq, bank); } +static const struct of_device_id omap_gpio_match[]; + static int __devinit omap_gpio_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + const struct of_device_id *match; struct omap_gpio_platform_data *pdata; struct resource *res; struct gpio_bank *bank; int ret = 0; - if (!pdev->dev.platform_data) { - ret = -EINVAL; - goto err_exit; - } + match = of_match_device(of_match_ptr(omap_gpio_match), dev); + + pdata = match ? match->data : dev->platform_data; + if (!pdata) + return -EINVAL; - bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL); + bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL); if (!bank) { - dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); - ret = -ENOMEM; - goto err_exit; + dev_err(dev, "Memory alloc failed\n"); + return -ENOMEM; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", - pdev->id); - ret = -ENODEV; - goto err_free; + dev_err(dev, "Invalid IRQ resource\n"); + return -ENODEV; } bank->irq = res->start; - bank->id = pdev->id; - - pdata = pdev->dev.platform_data; - bank->virtual_irq_start = pdata->virtual_irq_start; - bank->dev = &pdev->dev; + bank->dev = dev; bank->dbck_flag = pdata->dbck_flag; bank->stride = pdata->bank_stride; bank->width = pdata->bank_width; @@ -1087,6 +1094,18 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) bank->loses_context = pdata->loses_context; bank->get_context_loss_count = pdata->get_context_loss_count; bank->regs = pdata->regs; +#ifdef CONFIG_OF_GPIO + bank->chip.of_node = of_node_get(node); +#endif + + bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0); + if (bank->irq_base < 0) { + dev_err(dev, "Couldn't allocate IRQ numbers\n"); + return -ENODEV; + } + + bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base, + 0, &irq_domain_simple_ops, NULL); if (bank->regs->set_dataout && bank->regs->clr_dataout) bank->set_dataout = _set_gpio_dataout_reg; @@ -1098,18 +1117,20 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) /* Static mapping, never released */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", - pdev->id); - ret = -ENODEV; - goto err_free; + dev_err(dev, "Invalid mem resource\n"); + return -ENODEV; } - bank->base = ioremap(res->start, resource_size(res)); + if (!devm_request_mem_region(dev, res->start, resource_size(res), + pdev->name)) { + dev_err(dev, "Region already claimed\n"); + return -EBUSY; + } + + bank->base = devm_ioremap(dev, res->start, resource_size(res)); if (!bank->base) { - dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", - pdev->id); - ret = -ENOMEM; - goto err_free; + dev_err(dev, "Could not ioremap\n"); + return -ENOMEM; } platform_set_drvdata(pdev, bank); @@ -1130,11 +1151,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) list_add_tail(&bank->node, &omap_gpio_list); return ret; - -err_free: - kfree(bank); -err_exit: - return ret; } #ifdef CONFIG_ARCH_OMAP2PLUS @@ -1196,8 +1212,30 @@ static int omap_gpio_runtime_suspend(struct device *dev) struct gpio_bank *bank = platform_get_drvdata(pdev); u32 l1 = 0, l2 = 0; unsigned long flags; + u32 wake_low, wake_hi; spin_lock_irqsave(&bank->lock, flags); + + /* + * Only edges can generate a wakeup event to the PRCM. + * + * Therefore, ensure any wake-up capable GPIOs have + * edge-detection enabled before going idle to ensure a wakeup + * to the PRCM is generated on a GPIO transition. (c.f. 34xx + * NDA TRM 25.5.3.1) + * + * The normal values will be restored upon ->runtime_resume() + * by writing back the values saved in bank->context. + */ + wake_low = bank->context.leveldetect0 & bank->context.wake_en; + if (wake_low) + __raw_writel(wake_low | bank->context.fallingdetect, + bank->base + bank->regs->fallingdetect); + wake_hi = bank->context.leveldetect1 & bank->context.wake_en; + if (wake_hi) + __raw_writel(wake_hi | bank->context.risingdetect, + bank->base + bank->regs->risingdetect); + if (bank->power_mode != OFF_MODE) { bank->power_mode = 0; goto update_gpio_context_count; @@ -1207,9 +1245,6 @@ static int omap_gpio_runtime_suspend(struct device *dev) * non-wakeup GPIOs. Otherwise spurious IRQs will be * generated. See OMAP2420 Errata item 1.101. */ - if (!(bank->enabled_non_wakeup_gpios)) - goto update_gpio_context_count; - bank->saved_datain = __raw_readl(bank->base + bank->regs->datain); l1 = __raw_readl(bank->base + bank->regs->fallingdetect); @@ -1246,7 +1281,19 @@ static int omap_gpio_runtime_resume(struct device *dev) spin_lock_irqsave(&bank->lock, flags); _gpio_dbck_enable(bank); - if (!bank->enabled_non_wakeup_gpios || !bank->workaround_enabled) { + + /* + * In ->runtime_suspend(), level-triggered, wakeup-enabled + * GPIOs were set to edge trigger also in order to be able to + * generate a PRCM wakeup. Here we restore the + * pre-runtime_suspend() values for edge triggering. + */ + __raw_writel(bank->context.fallingdetect, + bank->base + bank->regs->fallingdetect); + __raw_writel(bank->context.risingdetect, + bank->base + bank->regs->risingdetect); + + if (!bank->workaround_enabled) { spin_unlock_irqrestore(&bank->lock, flags); return 0; } @@ -1397,11 +1444,95 @@ static const struct dev_pm_ops gpio_pm_ops = { NULL) }; +#if defined(CONFIG_OF) +static struct omap_gpio_reg_offs omap2_gpio_regs = { + .revision = OMAP24XX_GPIO_REVISION, + .direction = OMAP24XX_GPIO_OE, + .datain = OMAP24XX_GPIO_DATAIN, + .dataout = OMAP24XX_GPIO_DATAOUT, + .set_dataout = OMAP24XX_GPIO_SETDATAOUT, + .clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT, + .irqstatus = OMAP24XX_GPIO_IRQSTATUS1, + .irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2, + .irqenable = OMAP24XX_GPIO_IRQENABLE1, + .irqenable2 = OMAP24XX_GPIO_IRQENABLE2, + .set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1, + .clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1, + .debounce = OMAP24XX_GPIO_DEBOUNCE_VAL, + .debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN, + .ctrl = OMAP24XX_GPIO_CTRL, + .wkup_en = OMAP24XX_GPIO_WAKE_EN, + .leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0, + .leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1, + .risingdetect = OMAP24XX_GPIO_RISINGDETECT, + .fallingdetect = OMAP24XX_GPIO_FALLINGDETECT, +}; + +static struct omap_gpio_reg_offs omap4_gpio_regs = { + .revision = OMAP4_GPIO_REVISION, + .direction = OMAP4_GPIO_OE, + .datain = OMAP4_GPIO_DATAIN, + .dataout = OMAP4_GPIO_DATAOUT, + .set_dataout = OMAP4_GPIO_SETDATAOUT, + .clr_dataout = OMAP4_GPIO_CLEARDATAOUT, + .irqstatus = OMAP4_GPIO_IRQSTATUS0, + .irqstatus2 = OMAP4_GPIO_IRQSTATUS1, + .irqenable = OMAP4_GPIO_IRQSTATUSSET0, + .irqenable2 = OMAP4_GPIO_IRQSTATUSSET1, + .set_irqenable = OMAP4_GPIO_IRQSTATUSSET0, + .clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0, + .debounce = OMAP4_GPIO_DEBOUNCINGTIME, + .debounce_en = OMAP4_GPIO_DEBOUNCENABLE, + .ctrl = OMAP4_GPIO_CTRL, + .wkup_en = OMAP4_GPIO_IRQWAKEN0, + .leveldetect0 = OMAP4_GPIO_LEVELDETECT0, + .leveldetect1 = OMAP4_GPIO_LEVELDETECT1, + .risingdetect = OMAP4_GPIO_RISINGDETECT, + .fallingdetect = OMAP4_GPIO_FALLINGDETECT, +}; + +static struct omap_gpio_platform_data omap2_pdata = { + .regs = &omap2_gpio_regs, + .bank_width = 32, + .dbck_flag = false, +}; + +static struct omap_gpio_platform_data omap3_pdata = { + .regs = &omap2_gpio_regs, + .bank_width = 32, + .dbck_flag = true, +}; + +static struct omap_gpio_platform_data omap4_pdata = { + .regs = &omap4_gpio_regs, + .bank_width = 32, + .dbck_flag = true, +}; + +static const struct of_device_id omap_gpio_match[] = { + { + .compatible = "ti,omap4-gpio", + .data = &omap4_pdata, + }, + { + .compatible = "ti,omap3-gpio", + .data = &omap3_pdata, + }, + { + .compatible = "ti,omap2-gpio", + .data = &omap2_pdata, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, omap_gpio_match); +#endif + static struct platform_driver omap_gpio_driver = { .probe = omap_gpio_probe, .driver = { .name = "omap_gpio", .pm = &gpio_pm_ops, + .of_match_table = of_match_ptr(omap_gpio_match), }, }; diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index 77c9cc7..b4b5da4 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -352,7 +352,12 @@ static int pl061_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(pl061_dev_pm_ops, pl061_suspend, pl061_resume); +static const struct dev_pm_ops pl061_dev_pm_ops = { + .suspend = pl061_suspend, + .resume = pl061_resume, + .freeze = pl061_suspend, + .restore = pl061_resume, +}; #endif static struct amba_id pl061_ids[] = { diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index b2d3ee1..5689ce6 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -22,6 +22,8 @@ #include <linux/syscore_ops.h> #include <linux/slab.h> +#include <mach/irqs.h> + /* * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with * one set of registers. The register offsets are organized below: diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c index 7eecf69..8ea3b33 100644 --- a/drivers/gpio/gpio-sa1100.c +++ b/drivers/gpio/gpio-sa1100.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <mach/hardware.h> +#include <mach/irqs.h> static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) { diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 0a79a11..4627787 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -169,7 +169,7 @@ int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); } -static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip, +static int exynos_gpio_setpull(struct samsung_gpio_chip *chip, unsigned int off, samsung_gpio_pull_t pull) { if (pull == S3C_GPIO_PULL_UP) @@ -178,7 +178,7 @@ static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip, return samsung_gpio_setpull_updown(chip, off, pull); } -static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip, +static samsung_gpio_pull_t exynos_gpio_getpull(struct samsung_gpio_chip *chip, unsigned int off) { samsung_gpio_pull_t pull; @@ -452,9 +452,9 @@ static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { }; #endif -static struct samsung_gpio_cfg exynos4_gpio_cfg = { - .set_pull = exynos4_gpio_setpull, - .get_pull = exynos4_gpio_getpull, +static struct samsung_gpio_cfg exynos_gpio_cfg = { + .set_pull = exynos_gpio_setpull, + .get_pull = exynos_gpio_getpull, .set_config = samsung_gpio_setcfg_4bit, .get_config = samsung_gpio_getcfg_4bit, }; @@ -502,13 +502,13 @@ static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { .get_config = samsung_gpio_getcfg_2bit, }, [8] = { - .set_pull = exynos4_gpio_setpull, - .get_pull = exynos4_gpio_getpull, + .set_pull = exynos_gpio_setpull, + .get_pull = exynos_gpio_getpull, }, [9] = { .cfg_eint = 0x3, - .set_pull = exynos4_gpio_setpull, - .get_pull = exynos4_gpio_getpull, + .set_pull = exynos_gpio_setpull, + .get_pull = exynos_gpio_getpull, } }; @@ -2113,10 +2113,10 @@ static struct samsung_gpio_chip s5pv210_gpios_4bit[] = { }; /* - * Followings are the gpio banks in EXYNOS4210 + * Followings are the gpio banks in EXYNOS SoCs * * The 'config' member when left to NULL, is initialized to the default - * structure samsung_gpio_cfgs[3] in the init function below. + * structure exynos_gpio_cfg in the init function below. * * The 'base' member is also initialized in the init function below. * Note: The initialization of 'base' member of samsung_gpio_chip structure @@ -2331,7 +2331,6 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = { .label = "GPY6", }, }, { - .base = (S5P_VA_GPIO2 + 0xC00), .config = &samsung_gpio_cfgs[9], .irq_base = IRQ_EINT(0), .chip = { @@ -2341,7 +2340,6 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = { .to_irq = samsung_gpiolib_to_irq, }, }, { - .base = (S5P_VA_GPIO2 + 0xC20), .config = &samsung_gpio_cfgs[9], .irq_base = IRQ_EINT(8), .chip = { @@ -2351,7 +2349,6 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = { .to_irq = samsung_gpiolib_to_irq, }, }, { - .base = (S5P_VA_GPIO2 + 0xC40), .config = &samsung_gpio_cfgs[9], .irq_base = IRQ_EINT(16), .chip = { @@ -2361,7 +2358,6 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = { .to_irq = samsung_gpiolib_to_irq, }, }, { - .base = (S5P_VA_GPIO2 + 0xC60), .config = &samsung_gpio_cfgs[9], .irq_base = IRQ_EINT(24), .chip = { @@ -2386,8 +2382,280 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { #endif }; -#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) -static int exynos4_gpio_xlate(struct gpio_chip *gc, +static struct samsung_gpio_chip exynos5_gpios_1[] = { +#ifdef CONFIG_ARCH_EXYNOS5 + { + .chip = { + .base = EXYNOS5_GPA0(0), + .ngpio = EXYNOS5_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = EXYNOS5_GPA1(0), + .ngpio = EXYNOS5_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = EXYNOS5_GPA2(0), + .ngpio = EXYNOS5_GPIO_A2_NR, + .label = "GPA2", + }, + }, { + .chip = { + .base = EXYNOS5_GPB0(0), + .ngpio = EXYNOS5_GPIO_B0_NR, + .label = "GPB0", + }, + }, { + .chip = { + .base = EXYNOS5_GPB1(0), + .ngpio = EXYNOS5_GPIO_B1_NR, + .label = "GPB1", + }, + }, { + .chip = { + .base = EXYNOS5_GPB2(0), + .ngpio = EXYNOS5_GPIO_B2_NR, + .label = "GPB2", + }, + }, { + .chip = { + .base = EXYNOS5_GPB3(0), + .ngpio = EXYNOS5_GPIO_B3_NR, + .label = "GPB3", + }, + }, { + .chip = { + .base = EXYNOS5_GPC0(0), + .ngpio = EXYNOS5_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = EXYNOS5_GPC1(0), + .ngpio = EXYNOS5_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = EXYNOS5_GPC2(0), + .ngpio = EXYNOS5_GPIO_C2_NR, + .label = "GPC2", + }, + }, { + .chip = { + .base = EXYNOS5_GPC3(0), + .ngpio = EXYNOS5_GPIO_C3_NR, + .label = "GPC3", + }, + }, { + .chip = { + .base = EXYNOS5_GPD0(0), + .ngpio = EXYNOS5_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = EXYNOS5_GPD1(0), + .ngpio = EXYNOS5_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = EXYNOS5_GPY0(0), + .ngpio = EXYNOS5_GPIO_Y0_NR, + .label = "GPY0", + }, + }, { + .chip = { + .base = EXYNOS5_GPY1(0), + .ngpio = EXYNOS5_GPIO_Y1_NR, + .label = "GPY1", + }, + }, { + .chip = { + .base = EXYNOS5_GPY2(0), + .ngpio = EXYNOS5_GPIO_Y2_NR, + .label = "GPY2", + }, + }, { + .chip = { + .base = EXYNOS5_GPY3(0), + .ngpio = EXYNOS5_GPIO_Y3_NR, + .label = "GPY3", + }, + }, { + .chip = { + .base = EXYNOS5_GPY4(0), + .ngpio = EXYNOS5_GPIO_Y4_NR, + .label = "GPY4", + }, + }, { + .chip = { + .base = EXYNOS5_GPY5(0), + .ngpio = EXYNOS5_GPIO_Y5_NR, + .label = "GPY5", + }, + }, { + .chip = { + .base = EXYNOS5_GPY6(0), + .ngpio = EXYNOS5_GPIO_Y6_NR, + .label = "GPY6", + }, + }, { + .config = &samsung_gpio_cfgs[9], + .irq_base = IRQ_EINT(0), + .chip = { + .base = EXYNOS5_GPX0(0), + .ngpio = EXYNOS5_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .config = &samsung_gpio_cfgs[9], + .irq_base = IRQ_EINT(8), + .chip = { + .base = EXYNOS5_GPX1(0), + .ngpio = EXYNOS5_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .config = &samsung_gpio_cfgs[9], + .irq_base = IRQ_EINT(16), + .chip = { + .base = EXYNOS5_GPX2(0), + .ngpio = EXYNOS5_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .config = &samsung_gpio_cfgs[9], + .irq_base = IRQ_EINT(24), + .chip = { + .base = EXYNOS5_GPX3(0), + .ngpio = EXYNOS5_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos5_gpios_2[] = { +#ifdef CONFIG_ARCH_EXYNOS5 + { + .chip = { + .base = EXYNOS5_GPE0(0), + .ngpio = EXYNOS5_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = EXYNOS5_GPE1(0), + .ngpio = EXYNOS5_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = EXYNOS5_GPF0(0), + .ngpio = EXYNOS5_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = EXYNOS5_GPF1(0), + .ngpio = EXYNOS5_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = EXYNOS5_GPG0(0), + .ngpio = EXYNOS5_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = EXYNOS5_GPG1(0), + .ngpio = EXYNOS5_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = EXYNOS5_GPG2(0), + .ngpio = EXYNOS5_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = EXYNOS5_GPH0(0), + .ngpio = EXYNOS5_GPIO_H0_NR, + .label = "GPH0", + }, + }, { + .chip = { + .base = EXYNOS5_GPH1(0), + .ngpio = EXYNOS5_GPIO_H1_NR, + .label = "GPH1", + + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos5_gpios_3[] = { +#ifdef CONFIG_ARCH_EXYNOS5 + { + .chip = { + .base = EXYNOS5_GPV0(0), + .ngpio = EXYNOS5_GPIO_V0_NR, + .label = "GPV0", + }, + }, { + .chip = { + .base = EXYNOS5_GPV1(0), + .ngpio = EXYNOS5_GPIO_V1_NR, + .label = "GPV1", + }, + }, { + .chip = { + .base = EXYNOS5_GPV2(0), + .ngpio = EXYNOS5_GPIO_V2_NR, + .label = "GPV2", + }, + }, { + .chip = { + .base = EXYNOS5_GPV3(0), + .ngpio = EXYNOS5_GPIO_V3_NR, + .label = "GPV3", + }, + }, { + .chip = { + .base = EXYNOS5_GPV4(0), + .ngpio = EXYNOS5_GPIO_V4_NR, + .label = "GPV4", + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos5_gpios_4[] = { +#ifdef CONFIG_ARCH_EXYNOS5 + { + .chip = { + .base = EXYNOS5_GPZ(0), + .ngpio = EXYNOS5_GPIO_Z_NR, + .label = "GPZ", + }, + }, +#endif +}; + + +#if defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF) +static int exynos_gpio_xlate(struct gpio_chip *gc, const struct of_phandle_args *gpiospec, u32 *flags) { unsigned int pin; @@ -2413,13 +2681,13 @@ static int exynos4_gpio_xlate(struct gpio_chip *gc, return gpiospec->args[0]; } -static const struct of_device_id exynos4_gpio_dt_match[] __initdata = { +static const struct of_device_id exynos_gpio_dt_match[] __initdata = { { .compatible = "samsung,exynos4-gpio", }, {} }; -static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, - u64 base, u64 offset) +static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) { struct gpio_chip *gc = &chip->chip; u64 address; @@ -2429,28 +2697,29 @@ static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset; gc->of_node = of_find_matching_node_by_address(NULL, - exynos4_gpio_dt_match, address); + exynos_gpio_dt_match, address); if (!gc->of_node) { pr_info("gpio: device tree node not found for gpio controller" " with base address %08llx\n", address); return; } gc->of_gpio_n_cells = 4; - gc->of_xlate = exynos4_gpio_xlate; + gc->of_xlate = exynos_gpio_xlate; } -#elif defined(CONFIG_ARCH_EXYNOS4) -static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, - u64 base, u64 offset) +#elif defined(CONFIG_ARCH_EXYNOS) +static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) { return; } -#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */ +#endif /* defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF) */ /* TODO: cleanup soc_is_* */ static __init int samsung_gpiolib_init(void) { struct samsung_gpio_chip *chip; int i, nr_chips; + void __iomem *gpio_base1, *gpio_base2, *gpio_base3, *gpio_base4; int group = 0; samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs)); @@ -2516,66 +2785,200 @@ static __init int samsung_gpiolib_init(void) s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); #endif } else if (soc_is_exynos4210()) { - group = 0; +#ifdef CONFIG_CPU_EXYNOS4210 + void __iomem *gpx_base; /* gpio part1 */ + gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K); + if (gpio_base1 == NULL) { + pr_err("unable to ioremap for gpio_base1\n"); + goto err_ioremap1; + } + chip = exynos4_gpios_1; nr_chips = ARRAY_SIZE(exynos4_gpios_1); for (i = 0; i < nr_chips; i++, chip++) { if (!chip->config) { - chip->config = &exynos4_gpio_cfg; + chip->config = &exynos_gpio_cfg; chip->group = group++; } -#ifdef CONFIG_CPU_EXYNOS4210 - exynos4_gpiolib_attach_ofnode(chip, + exynos_gpiolib_attach_ofnode(chip, EXYNOS4_PA_GPIO1, i * 0x20); -#endif } - samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1); + samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, + nr_chips, gpio_base1); /* gpio part2 */ + gpio_base2 = ioremap(EXYNOS4_PA_GPIO2, SZ_4K); + if (gpio_base2 == NULL) { + pr_err("unable to ioremap for gpio_base2\n"); + goto err_ioremap2; + } + + /* need to set base address for gpx */ + chip = &exynos4_gpios_2[16]; + gpx_base = gpio_base2 + 0xC00; + for (i = 0; i < 4; i++, chip++, gpx_base += 0x20) + chip->base = gpx_base; + chip = exynos4_gpios_2; nr_chips = ARRAY_SIZE(exynos4_gpios_2); for (i = 0; i < nr_chips; i++, chip++) { if (!chip->config) { - chip->config = &exynos4_gpio_cfg; + chip->config = &exynos_gpio_cfg; chip->group = group++; } -#ifdef CONFIG_CPU_EXYNOS4210 - exynos4_gpiolib_attach_ofnode(chip, + exynos_gpiolib_attach_ofnode(chip, EXYNOS4_PA_GPIO2, i * 0x20); -#endif } - samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2); + samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, + nr_chips, gpio_base2); /* gpio part3 */ + gpio_base3 = ioremap(EXYNOS4_PA_GPIO3, SZ_256); + if (gpio_base3 == NULL) { + pr_err("unable to ioremap for gpio_base3\n"); + goto err_ioremap3; + } + chip = exynos4_gpios_3; nr_chips = ARRAY_SIZE(exynos4_gpios_3); for (i = 0; i < nr_chips; i++, chip++) { if (!chip->config) { - chip->config = &exynos4_gpio_cfg; + chip->config = &exynos_gpio_cfg; chip->group = group++; } -#ifdef CONFIG_CPU_EXYNOS4210 - exynos4_gpiolib_attach_ofnode(chip, + exynos_gpiolib_attach_ofnode(chip, EXYNOS4_PA_GPIO3, i * 0x20); -#endif } - samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3); + samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, + nr_chips, gpio_base3); #if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT) s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); #endif + +#endif /* CONFIG_CPU_EXYNOS4210 */ + } else if (soc_is_exynos5250()) { +#ifdef CONFIG_SOC_EXYNOS5250 + void __iomem *gpx_base; + + /* gpio part1 */ + gpio_base1 = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); + if (gpio_base1 == NULL) { + pr_err("unable to ioremap for gpio_base1\n"); + goto err_ioremap1; + } + + /* need to set base address for gpx */ + chip = &exynos5_gpios_1[20]; + gpx_base = gpio_base1 + 0xC00; + for (i = 0; i < 4; i++, chip++, gpx_base += 0x20) + chip->base = gpx_base; + + chip = exynos5_gpios_1; + nr_chips = ARRAY_SIZE(exynos5_gpios_1); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos_gpio_cfg; + chip->group = group++; + } + exynos_gpiolib_attach_ofnode(chip, + EXYNOS5_PA_GPIO1, i * 0x20); + } + samsung_gpiolib_add_4bit_chips(exynos5_gpios_1, + nr_chips, gpio_base1); + + /* gpio part2 */ + gpio_base2 = ioremap(EXYNOS5_PA_GPIO2, SZ_4K); + if (gpio_base2 == NULL) { + pr_err("unable to ioremap for gpio_base2\n"); + goto err_ioremap2; + } + + chip = exynos5_gpios_2; + nr_chips = ARRAY_SIZE(exynos5_gpios_2); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos_gpio_cfg; + chip->group = group++; + } + exynos_gpiolib_attach_ofnode(chip, + EXYNOS5_PA_GPIO2, i * 0x20); + } + samsung_gpiolib_add_4bit_chips(exynos5_gpios_2, + nr_chips, gpio_base2); + + /* gpio part3 */ + gpio_base3 = ioremap(EXYNOS5_PA_GPIO3, SZ_4K); + if (gpio_base3 == NULL) { + pr_err("unable to ioremap for gpio_base3\n"); + goto err_ioremap3; + } + + /* need to set base address for gpv */ + exynos5_gpios_3[0].base = gpio_base3; + exynos5_gpios_3[1].base = gpio_base3 + 0x20; + exynos5_gpios_3[2].base = gpio_base3 + 0x60; + exynos5_gpios_3[3].base = gpio_base3 + 0x80; + exynos5_gpios_3[4].base = gpio_base3 + 0xC0; + + chip = exynos5_gpios_3; + nr_chips = ARRAY_SIZE(exynos5_gpios_3); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos_gpio_cfg; + chip->group = group++; + } + exynos_gpiolib_attach_ofnode(chip, + EXYNOS5_PA_GPIO3, i * 0x20); + } + samsung_gpiolib_add_4bit_chips(exynos5_gpios_3, + nr_chips, gpio_base3); + + /* gpio part4 */ + gpio_base4 = ioremap(EXYNOS5_PA_GPIO4, SZ_4K); + if (gpio_base4 == NULL) { + pr_err("unable to ioremap for gpio_base4\n"); + goto err_ioremap4; + } + + chip = exynos5_gpios_4; + nr_chips = ARRAY_SIZE(exynos5_gpios_4); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos_gpio_cfg; + chip->group = group++; + } + exynos_gpiolib_attach_ofnode(chip, + EXYNOS5_PA_GPIO4, i * 0x20); + } + samsung_gpiolib_add_4bit_chips(exynos5_gpios_4, + nr_chips, gpio_base4); +#endif /* CONFIG_SOC_EXYNOS5250 */ } else { WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n"); return -ENODEV; } return 0; + +err_ioremap4: + iounmap(gpio_base3); +err_ioremap3: + iounmap(gpio_base2); +err_ioremap2: + iounmap(gpio_base1); +err_ioremap1: + return -ENOMEM; } core_initcall(samsung_gpiolib_init); diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c new file mode 100644 index 0000000..9ba15d3 --- /dev/null +++ b/drivers/gpio/gpio-sodaville.c @@ -0,0 +1,302 @@ +/* + * GPIO interface for Intel Sodaville SoCs. + * + * Copyright (c) 2010, 2011 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/of_irq.h> +#include <linux/basic_mmio_gpio.h> + +#define DRV_NAME "sdv_gpio" +#define SDV_NUM_PUB_GPIOS 12 +#define PCI_DEVICE_ID_SDV_GPIO 0x2e67 +#define GPIO_BAR 0 + +#define GPOUTR 0x00 +#define GPOER 0x04 +#define GPINR 0x08 + +#define GPSTR 0x0c +#define GPIT1R0 0x10 +#define GPIO_INT 0x14 +#define GPIT1R1 0x18 + +#define GPMUXCTL 0x1c + +struct sdv_gpio_chip_data { + int irq_base; + void __iomem *gpio_pub_base; + struct irq_domain id; + struct irq_chip_generic *gc; + struct bgpio_chip bgpio; +}; + +static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct sdv_gpio_chip_data *sd = gc->private; + void __iomem *type_reg; + u32 irq_offs = d->irq - sd->irq_base; + u32 reg; + + if (irq_offs < 8) + type_reg = sd->gpio_pub_base + GPIT1R0; + else + type_reg = sd->gpio_pub_base + GPIT1R1; + + reg = readl(type_reg); + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + reg &= ~BIT(4 * (irq_offs % 8)); + break; + + case IRQ_TYPE_LEVEL_LOW: + reg |= BIT(4 * (irq_offs % 8)); + break; + + default: + return -EINVAL; + } + + writel(reg, type_reg); + return 0; +} + +static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data) +{ + struct sdv_gpio_chip_data *sd = data; + u32 irq_stat = readl(sd->gpio_pub_base + GPSTR); + + irq_stat &= readl(sd->gpio_pub_base + GPIO_INT); + if (!irq_stat) + return IRQ_NONE; + + while (irq_stat) { + u32 irq_bit = __fls(irq_stat); + + irq_stat &= ~BIT(irq_bit); + generic_handle_irq(sd->irq_base + irq_bit); + } + + return IRQ_HANDLED; +} + +static int sdv_xlate(struct irq_domain *h, struct device_node *node, + const u32 *intspec, u32 intsize, irq_hw_number_t *out_hwirq, + u32 *out_type) +{ + u32 line, type; + + if (node != h->of_node) + return -EINVAL; + + if (intsize < 2) + return -EINVAL; + + line = *intspec; + *out_hwirq = line; + + intspec++; + type = *intspec; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + case IRQ_TYPE_LEVEL_HIGH: + *out_type = type; + break; + default: + return -EINVAL; + } + return 0; +} + +static struct irq_domain_ops irq_domain_sdv_ops = { + .dt_translate = sdv_xlate, +}; + +static __devinit int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd, + struct pci_dev *pdev) +{ + struct irq_chip_type *ct; + int ret; + + sd->irq_base = irq_alloc_descs(-1, 0, SDV_NUM_PUB_GPIOS, -1); + if (sd->irq_base < 0) + return sd->irq_base; + + /* mask + ACK all interrupt sources */ + writel(0, sd->gpio_pub_base + GPIO_INT); + writel((1 << 11) - 1, sd->gpio_pub_base + GPSTR); + + ret = request_irq(pdev->irq, sdv_gpio_pub_irq_handler, IRQF_SHARED, + "sdv_gpio", sd); + if (ret) + goto out_free_desc; + + sd->id.irq_base = sd->irq_base; + sd->id.of_node = of_node_get(pdev->dev.of_node); + sd->id.ops = &irq_domain_sdv_ops; + + /* + * This gpio irq controller latches level irqs. Testing shows that if + * we unmask & ACK the IRQ before the source of the interrupt is gone + * then the interrupt is active again. + */ + sd->gc = irq_alloc_generic_chip("sdv-gpio", 1, sd->irq_base, + sd->gpio_pub_base, handle_fasteoi_irq); + if (!sd->gc) { + ret = -ENOMEM; + goto out_free_irq; + } + + sd->gc->private = sd; + ct = sd->gc->chip_types; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; + ct->regs.eoi = GPSTR; + ct->regs.mask = GPIO_INT; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_eoi = irq_gc_eoi; + ct->chip.irq_set_type = sdv_gpio_pub_set_type; + + irq_setup_generic_chip(sd->gc, IRQ_MSK(SDV_NUM_PUB_GPIOS), + IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, + IRQ_LEVEL | IRQ_NOPROBE); + + irq_domain_add(&sd->id); + return 0; +out_free_irq: + free_irq(pdev->irq, sd); +out_free_desc: + irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS); + return ret; +} + +static int __devinit sdv_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct sdv_gpio_chip_data *sd; + unsigned long addr; + const void *prop; + int len; + int ret; + u32 mux_val; + + sd = kzalloc(sizeof(struct sdv_gpio_chip_data), GFP_KERNEL); + if (!sd) + return -ENOMEM; + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device.\n"); + goto done; + } + + ret = pci_request_region(pdev, GPIO_BAR, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR); + goto disable_pci; + } + + addr = pci_resource_start(pdev, GPIO_BAR); + if (!addr) + goto release_reg; + sd->gpio_pub_base = ioremap(addr, pci_resource_len(pdev, GPIO_BAR)); + + prop = of_get_property(pdev->dev.of_node, "intel,muxctl", &len); + if (prop && len == 4) { + mux_val = of_read_number(prop, 1); + writel(mux_val, sd->gpio_pub_base + GPMUXCTL); + } + + ret = bgpio_init(&sd->bgpio, &pdev->dev, 4, + sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR, + NULL, sd->gpio_pub_base + GPOER, NULL, false); + if (ret) + goto unmap; + sd->bgpio.gc.ngpio = SDV_NUM_PUB_GPIOS; + + ret = gpiochip_add(&sd->bgpio.gc); + if (ret < 0) { + dev_err(&pdev->dev, "gpiochip_add() failed.\n"); + goto unmap; + } + + ret = sdv_register_irqsupport(sd, pdev); + if (ret) + goto unmap; + + pci_set_drvdata(pdev, sd); + dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n"); + return 0; + +unmap: + iounmap(sd->gpio_pub_base); +release_reg: + pci_release_region(pdev, GPIO_BAR); +disable_pci: + pci_disable_device(pdev); +done: + kfree(sd); + return ret; +} + +static void sdv_gpio_remove(struct pci_dev *pdev) +{ + struct sdv_gpio_chip_data *sd = pci_get_drvdata(pdev); + + irq_domain_del(&sd->id); + free_irq(pdev->irq, sd); + irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS); + + if (gpiochip_remove(&sd->bgpio.gc)) + dev_err(&pdev->dev, "gpiochip_remove() failed.\n"); + + pci_release_region(pdev, GPIO_BAR); + iounmap(sd->gpio_pub_base); + pci_disable_device(pdev); + kfree(sd); +} + +static struct pci_device_id sdv_gpio_pci_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) }, + { 0, }, +}; + +static struct pci_driver sdv_gpio_driver = { + .name = DRV_NAME, + .id_table = sdv_gpio_pci_ids, + .probe = sdv_gpio_probe, + .remove = sdv_gpio_remove, +}; + +static int __init sdv_gpio_init(void) +{ + return pci_register_driver(&sdv_gpio_driver); +} +module_init(sdv_gpio_init); + +static void __exit sdv_gpio_exit(void) +{ + pci_unregister_driver(&sdv_gpio_driver); +} +module_exit(sdv_gpio_exit); + +MODULE_AUTHOR("Hans J. Koch <hjk@linutronix.de>"); +MODULE_DESCRIPTION("GPIO interface for Intel Sodaville SoCs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index 87a68a8..dce3472 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -54,7 +54,7 @@ static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) if (ret < 0) return ret; - return ret & mask; + return !!(ret & mask); } static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) @@ -307,13 +307,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev) struct stmpe_gpio_platform_data *pdata; struct stmpe_gpio *stmpe_gpio; int ret; - int irq; + int irq = 0; pdata = stmpe->pdata->gpio; irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL); if (!stmpe_gpio) @@ -330,21 +328,28 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev) stmpe_gpio->chip.dev = &pdev->dev; stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1; - stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0); + if (irq >= 0) + stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0); + else + dev_info(&pdev->dev, + "device configured in no-irq mode; " + "irqs are not available\n"); ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); if (ret) goto out_free; - ret = stmpe_gpio_irq_init(stmpe_gpio); - if (ret) - goto out_disable; + if (irq >= 0) { + ret = stmpe_gpio_irq_init(stmpe_gpio); + if (ret) + goto out_disable; - ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT, - "stmpe-gpio", stmpe_gpio); - if (ret) { - dev_err(&pdev->dev, "unable to get irq: %d\n", ret); - goto out_removeirq; + ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, + IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + goto out_removeirq; + } } ret = gpiochip_add(&stmpe_gpio->chip); @@ -361,9 +366,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev) return 0; out_freeirq: - free_irq(irq, stmpe_gpio); + if (irq >= 0) + free_irq(irq, stmpe_gpio); out_removeirq: - stmpe_gpio_irq_remove(stmpe_gpio); + if (irq >= 0) + stmpe_gpio_irq_remove(stmpe_gpio); out_disable: stmpe_disable(stmpe, STMPE_BLOCK_GPIO); out_free: @@ -391,8 +398,10 @@ static int __devexit stmpe_gpio_remove(struct platform_device *pdev) stmpe_disable(stmpe, STMPE_BLOCK_GPIO); - free_irq(irq, stmpe_gpio); - stmpe_gpio_irq_remove(stmpe_gpio); + if (irq >= 0) { + free_irq(irq, stmpe_gpio); + stmpe_gpio_irq_remove(stmpe_gpio); + } platform_set_drvdata(pdev, NULL); kfree(stmpe_gpio); diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 6f17671..32de670 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -109,11 +109,13 @@ void tegra_gpio_enable(int gpio) { tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1); } +EXPORT_SYMBOL_GPL(tegra_gpio_enable); void tegra_gpio_disable(int gpio) { tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0); } +EXPORT_SYMBOL_GPL(tegra_gpio_disable); static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { @@ -459,7 +461,7 @@ static int __init tegra_gpio_init(void) } postcore_initcall(tegra_gpio_init); -void __init tegra_gpio_config(struct tegra_gpio_table *table, int num) +void tegra_gpio_config(struct tegra_gpio_table *table, int num) { int i; diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c index 91f45b9..7eef648 100644 --- a/drivers/gpio/gpio-tps65910.c +++ b/drivers/gpio/gpio-tps65910.c @@ -69,6 +69,7 @@ static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset) void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) { int ret; + struct tps65910_board *board_data; if (!gpio_base) return; @@ -80,10 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) switch(tps65910_chip_id(tps65910)) { case TPS65910: - tps65910->gpio.ngpio = 6; + tps65910->gpio.ngpio = TPS65910_NUM_GPIO; break; case TPS65911: - tps65910->gpio.ngpio = 9; + tps65910->gpio.ngpio = TPS65911_NUM_GPIO; break; default: return; @@ -95,6 +96,21 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) tps65910->gpio.set = tps65910_gpio_set; tps65910->gpio.get = tps65910_gpio_get; + /* Configure sleep control for gpios */ + board_data = dev_get_platdata(tps65910->dev); + if (board_data) { + int i; + for (i = 0; i < tps65910->gpio.ngpio; ++i) { + if (board_data->en_gpio_sleep[i]) { + ret = tps65910_set_bits(tps65910, + TPS65910_GPIO0 + i, GPIO_SLEEP_MASK); + if (ret < 0) + dev_warn(tps65910->dev, + "GPIO Sleep setting failed\n"); + } + } + } + ret = gpiochip_add(&tps65910->gpio); if (ret) diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index b8b4f22..94256fe 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -32,6 +32,8 @@ #include <linux/irq.h> #include <linux/gpio.h> #include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/irqdomain.h> #include <linux/i2c/twl.h> @@ -256,7 +258,8 @@ static int twl_request(struct gpio_chip *chip, unsigned offset) * and vMMC2 power supplies based on card presence. */ pdata = chip->dev->platform_data; - value |= pdata->mmc_cd & 0x03; + if (pdata) + value |= pdata->mmc_cd & 0x03; status = gpio_twl4030_write(REG_GPIO_CTRL, value); } @@ -395,59 +398,70 @@ static int gpio_twl4030_remove(struct platform_device *pdev); static int __devinit gpio_twl4030_probe(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; - int ret; + struct device_node *node = pdev->dev.of_node; + int ret, irq_base; /* maybe setup IRQs */ - if (pdata->irq_base) { - if (is_module()) { - dev_err(&pdev->dev, - "can't dispatch IRQs from modules\n"); - goto no_irqs; - } - ret = twl4030_sih_setup(TWL4030_MODULE_GPIO); - if (ret < 0) - return ret; - WARN_ON(ret != pdata->irq_base); - twl4030_gpio_irq_base = ret; + if (is_module()) { + dev_err(&pdev->dev, "can't dispatch IRQs from modules\n"); + goto no_irqs; + } + + irq_base = irq_alloc_descs(-1, 0, TWL4030_GPIO_MAX, 0); + if (irq_base < 0) { + dev_err(&pdev->dev, "Failed to alloc irq_descs\n"); + return irq_base; } + irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0, + &irq_domain_simple_ops, NULL); + + ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base); + if (ret < 0) + return ret; + + twl4030_gpio_irq_base = irq_base; + no_irqs: - /* - * NOTE: boards may waste power if they don't set pullups - * and pulldowns correctly ... default for non-ULPI pins is - * pulldown, and some other pins may have external pullups - * or pulldowns. Careful! - */ - ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); - if (ret) - dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", - pdata->pullups, pdata->pulldowns, - ret); - - ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); - if (ret) - dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", - pdata->debounce, pdata->mmc_cd, - ret); - - twl_gpiochip.base = pdata->gpio_base; + twl_gpiochip.base = -1; twl_gpiochip.ngpio = TWL4030_GPIO_MAX; twl_gpiochip.dev = &pdev->dev; - /* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, - * is (still) clear if use_leds is set. - */ - if (pdata->use_leds) - twl_gpiochip.ngpio += 2; + if (pdata) { + twl_gpiochip.base = pdata->gpio_base; + + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, + ret); + + ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); + if (ret) + dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", + pdata->debounce, pdata->mmc_cd, + ret); + + /* + * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + } ret = gpiochip_add(&twl_gpiochip); if (ret < 0) { - dev_err(&pdev->dev, - "could not register gpiochip, %d\n", - ret); + dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); twl_gpiochip.ngpio = 0; gpio_twl4030_remove(pdev); - } else if (pdata->setup) { + } else if (pdata && pdata->setup) { int status; status = pdata->setup(&pdev->dev, @@ -465,7 +479,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev) struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; int status; - if (pdata->teardown) { + if (pdata && pdata->teardown) { status = pdata->teardown(&pdev->dev, pdata->gpio_base, TWL4030_GPIO_MAX); if (status) { @@ -486,12 +500,21 @@ static int gpio_twl4030_remove(struct platform_device *pdev) return -EIO; } +static const struct of_device_id twl_gpio_match[] = { + { .compatible = "ti,twl4030-gpio", }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl_gpio_match); + /* Note: this hardware lives inside an I2C-based multi-function device. */ MODULE_ALIAS("platform:twl4030_gpio"); static struct platform_driver gpio_twl4030_driver = { - .driver.name = "twl4030_gpio", - .driver.owner = THIS_MODULE, + .driver = { + .name = "twl4030_gpio", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl_gpio_match), + }, .probe = gpio_twl4030_probe, .remove = gpio_twl4030_remove, }; diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 17fdf4b..5a75510 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -58,6 +58,8 @@ struct gpio_desc { #define FLAG_TRIG_FALL 5 /* trigger on falling edge */ #define FLAG_TRIG_RISE 6 /* trigger on rising edge */ #define FLAG_ACTIVE_LOW 7 /* sysfs value has active low */ +#define FLAG_OPEN_DRAIN 8 /* Gpio is open drain type */ +#define FLAG_OPEN_SOURCE 9 /* Gpio is open source type */ #define ID_SHIFT 16 /* add new flags before this one */ @@ -873,6 +875,7 @@ void gpio_unexport(unsigned gpio) { struct gpio_desc *desc; int status = 0; + struct device *dev = NULL; if (!gpio_is_valid(gpio)) { status = -EINVAL; @@ -884,19 +887,20 @@ void gpio_unexport(unsigned gpio) desc = &gpio_desc[gpio]; if (test_bit(FLAG_EXPORT, &desc->flags)) { - struct device *dev = NULL; dev = class_find_device(&gpio_class, NULL, desc, match_export); if (dev) { gpio_setup_irq(desc, dev, 0); clear_bit(FLAG_EXPORT, &desc->flags); - put_device(dev); - device_unregister(dev); } else status = -ENODEV; } mutex_unlock(&sysfs_lock); + if (dev) { + device_unregister(dev); + put_device(dev); + } done: if (status) pr_debug("%s: gpio%d status %d\n", __func__, gpio, status); @@ -1150,8 +1154,9 @@ EXPORT_SYMBOL_GPL(gpiochip_remove); * non-zero, this function will return to the caller and not iterate over any * more gpio_chips. */ -struct gpio_chip *gpiochip_find(void *data, - int (*match)(struct gpio_chip *chip, void *data)) +struct gpio_chip *gpiochip_find(const void *data, + int (*match)(struct gpio_chip *chip, + const void *data)) { struct gpio_chip *chip = NULL; unsigned long flags; @@ -1261,6 +1266,8 @@ void gpio_free(unsigned gpio) module_put(desc->chip->owner); clear_bit(FLAG_ACTIVE_LOW, &desc->flags); clear_bit(FLAG_REQUESTED, &desc->flags); + clear_bit(FLAG_OPEN_DRAIN, &desc->flags); + clear_bit(FLAG_OPEN_SOURCE, &desc->flags); } else WARN_ON(extra_checks); @@ -1282,6 +1289,12 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) if (err) return err; + if (flags & GPIOF_OPEN_DRAIN) + set_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags); + + if (flags & GPIOF_OPEN_SOURCE) + set_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags); + if (flags & GPIOF_DIR_IN) err = gpio_direction_input(gpio); else @@ -1431,6 +1444,14 @@ int gpio_direction_output(unsigned gpio, int value) struct gpio_desc *desc = &gpio_desc[gpio]; int status = -EINVAL; + /* Open drain pin should not be driven to 1 */ + if (value && test_bit(FLAG_OPEN_DRAIN, &desc->flags)) + return gpio_direction_input(gpio); + + /* Open source pin should not be driven to 0 */ + if (!value && test_bit(FLAG_OPEN_SOURCE, &desc->flags)) + return gpio_direction_input(gpio); + spin_lock_irqsave(&gpio_lock, flags); if (!gpio_is_valid(gpio)) @@ -1560,6 +1581,7 @@ int __gpio_get_value(unsigned gpio) int value; chip = gpio_to_chip(gpio); + /* Should be using gpio_get_value_cansleep() */ WARN_ON(chip->can_sleep); value = chip->get ? chip->get(chip, gpio - chip->base) : 0; trace_gpio_value(gpio, 1, value); @@ -1567,6 +1589,57 @@ int __gpio_get_value(unsigned gpio) } EXPORT_SYMBOL_GPL(__gpio_get_value); +/* + * _gpio_set_open_drain_value() - Set the open drain gpio's value. + * @gpio: Gpio whose state need to be set. + * @chip: Gpio chip. + * @value: Non-zero for setting it HIGH otherise it will set to LOW. + */ +static void _gpio_set_open_drain_value(unsigned gpio, + struct gpio_chip *chip, int value) +{ + int err = 0; + if (value) { + err = chip->direction_input(chip, gpio - chip->base); + if (!err) + clear_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags); + } else { + err = chip->direction_output(chip, gpio - chip->base, 0); + if (!err) + set_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags); + } + trace_gpio_direction(gpio, value, err); + if (err < 0) + pr_err("%s: Error in set_value for open drain gpio%d err %d\n", + __func__, gpio, err); +} + +/* + * _gpio_set_open_source() - Set the open source gpio's value. + * @gpio: Gpio whose state need to be set. + * @chip: Gpio chip. + * @value: Non-zero for setting it HIGH otherise it will set to LOW. + */ +static void _gpio_set_open_source_value(unsigned gpio, + struct gpio_chip *chip, int value) +{ + int err = 0; + if (value) { + err = chip->direction_output(chip, gpio - chip->base, 1); + if (!err) + set_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags); + } else { + err = chip->direction_input(chip, gpio - chip->base); + if (!err) + clear_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags); + } + trace_gpio_direction(gpio, !value, err); + if (err < 0) + pr_err("%s: Error in set_value for open source gpio%d err %d\n", + __func__, gpio, err); +} + + /** * __gpio_set_value() - assign a gpio's value * @gpio: gpio whose value will be assigned @@ -1581,9 +1654,15 @@ void __gpio_set_value(unsigned gpio, int value) struct gpio_chip *chip; chip = gpio_to_chip(gpio); + /* Should be using gpio_set_value_cansleep() */ WARN_ON(chip->can_sleep); trace_gpio_value(gpio, 0, value); - chip->set(chip, gpio - chip->base, value); + if (test_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags)) + _gpio_set_open_drain_value(gpio, chip, value); + else if (test_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags)) + _gpio_set_open_source_value(gpio, chip, value); + else + chip->set(chip, gpio - chip->base, value); } EXPORT_SYMBOL_GPL(__gpio_set_value); @@ -1650,7 +1729,12 @@ void gpio_set_value_cansleep(unsigned gpio, int value) might_sleep_if(extra_checks); chip = gpio_to_chip(gpio); trace_gpio_value(gpio, 0, value); - chip->set(chip, gpio - chip->base, value); + if (test_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags)) + _gpio_set_open_drain_value(gpio, chip, value); + else if (test_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags)) + _gpio_set_open_source_value(gpio, chip, value); + else + chip->set(chip, gpio - chip->base, value); } EXPORT_SYMBOL_GPL(gpio_set_value_cansleep); diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c index 4c2cb4a..5675d93 100644 --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.c +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c @@ -244,7 +244,6 @@ static int mdfld_dsi_connector_set_property(struct drm_connector *connector, uint64_t value) { struct drm_encoder *encoder = connector->encoder; - struct backlight_device *psb_bd; if (!strcmp(property->name, "scaling mode") && encoder) { struct psb_intel_crtc *psb_crtc = @@ -301,11 +300,15 @@ static int mdfld_dsi_connector_set_property(struct drm_connector *connector, value)) goto set_prop_error; else { +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + struct backlight_device *psb_bd; + psb_bd = mdfld_get_backlight_device(); if (psb_bd) { psb_bd->props.brightness = value; mdfld_set_brightness(psb_bd); } +#endif } } set_prop_done: diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 0694e17..1a7559b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -467,6 +467,10 @@ static int i915_drm_freeze(struct drm_device *dev) /* Modeset on resume, not lid events */ dev_priv->modeset_on_lid = 0; + console_lock(); + intel_fbdev_set_suspend(dev, 1); + console_unlock(); + return 0; } @@ -539,6 +543,9 @@ static int i915_drm_thaw(struct drm_device *dev) dev_priv->modeset_on_lid = 0; + console_lock(); + intel_fbdev_set_suspend(dev, 0); + console_unlock(); return error; } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 9cec6c3..5a14149 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -382,7 +382,7 @@ extern int intel_framebuffer_init(struct drm_device *dev, struct drm_i915_gem_object *obj); extern int intel_fbdev_init(struct drm_device *dev); extern void intel_fbdev_fini(struct drm_device *dev); - +extern void intel_fbdev_set_suspend(struct drm_device *dev, int state); extern void intel_prepare_page_flip(struct drm_device *dev, int plane); extern void intel_finish_page_flip(struct drm_device *dev, int pipe); extern void intel_finish_page_flip_plane(struct drm_device *dev, int plane); diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 2d87669..19ecd78 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -254,6 +254,16 @@ void intel_fbdev_fini(struct drm_device *dev) kfree(dev_priv->fbdev); dev_priv->fbdev = NULL; } + +void intel_fbdev_set_suspend(struct drm_device *dev, int state) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + if (!dev_priv->fbdev) + return; + + fb_set_suspend(dev_priv->fbdev->helper.fbdev, state); +} + MODULE_LICENSE("GPL and additional rights"); void intel_fb_output_poll_changed(struct drm_device *dev) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 8f510fd..fa86035 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -654,10 +654,13 @@ nouveau_connector_detect_depth(struct drm_connector *connector) if (nv_connector->edid && connector->display_info.bpc) return; - /* if not, we're out of options unless we're LVDS, default to 6bpc */ - connector->display_info.bpc = 6; - if (nv_encoder->dcb->type != OUTPUT_LVDS) + /* if not, we're out of options unless we're LVDS, default to 8bpc */ + if (nv_encoder->dcb->type != OUTPUT_LVDS) { + connector->display_info.bpc = 8; return; + } + + connector->display_info.bpc = 6; /* LVDS: panel straps */ if (bios->fp_no_ddc) { diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c index 8f4f914..e2be95a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_i2c.c +++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c @@ -315,8 +315,8 @@ nouveau_i2c_init(struct drm_device *dev) struct drm_nouveau_private *dev_priv = dev->dev_private; struct nvbios *bios = &dev_priv->vbios; struct nouveau_i2c_chan *port; + u8 version = 0x00, entries, recordlen; u8 *i2c, *entry, legacy[2][4] = {}; - u8 version, entries, recordlen; int ret, i; INIT_LIST_HEAD(&dev_priv->i2c_ports); @@ -346,12 +346,12 @@ nouveau_i2c_init(struct drm_device *dev) if (i2c[7]) legacy[1][1] = i2c[7]; } - if (i2c && version >= 0x30) { + if (version >= 0x30) { entry = i2c[1] + i2c; entries = i2c[2]; recordlen = i2c[3]; } else - if (i2c) { + if (version) { entry = i2c; entries = 16; recordlen = 4; diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index a3ae91f..a4886b3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -852,7 +852,7 @@ nouveau_card_init(struct drm_device *dev) if (ret) goto out_pm; - if (!dev_priv->noaccel) { + if (dev_priv->eng[NVOBJ_ENGINE_GR]) { ret = nouveau_card_channel_init(dev); if (ret) goto out_fence; diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 083b3ea..b5ff1f7 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -588,8 +588,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, if (encoder->crtc == crtc) { radeon_encoder = to_radeon_encoder(encoder); connector = radeon_get_connector_for_encoder(encoder); - if (connector && connector->display_info.bpc) - bpc = connector->display_info.bpc; + /* if (connector && connector->display_info.bpc) + bpc = connector->display_info.bpc; */ encoder_mode = atombios_get_encoder_mode(encoder); is_duallink = radeon_dig_monitor_is_duallink(encoder, mode->clock); if ((radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) || @@ -965,7 +965,9 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode struct radeon_connector_atom_dig *dig_connector = radeon_connector->con_priv; int dp_clock; - bpc = connector->display_info.bpc; + + /* if (connector->display_info.bpc) + bpc = connector->display_info.bpc; */ switch (encoder_mode) { case ATOM_ENCODER_MODE_DP_MST: diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 6c62be2..c57d856 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -405,10 +405,13 @@ static void dp_get_adjust_train(u8 link_status[DP_LINK_STATUS_SIZE], /* get bpc from the EDID */ static int convert_bpc_to_bpp(int bpc) { +#if 0 if (bpc == 0) return 24; else return bpc * 3; +#endif + return 24; } /* get the max pix clock supported by the link rate and lane num */ diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 468b874..e607c4d 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -541,7 +541,7 @@ atombios_dig_encoder_setup(struct drm_encoder *encoder, int action, int panel_mo dp_clock = dig_connector->dp_clock; dp_lane_count = dig_connector->dp_lane_count; hpd_id = radeon_connector->hpd.hpd; - bpc = connector->display_info.bpc; + /* bpc = connector->display_info.bpc; */ } /* no dig encoder assigned */ @@ -1159,7 +1159,7 @@ atombios_external_encoder_setup(struct drm_encoder *encoder, dp_lane_count = dig_connector->dp_lane_count; connector_object_id = (radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT; - bpc = connector->display_info.bpc; + /* bpc = connector->display_info.bpc; */ } memset(&args, 0, sizeof(args)); diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index a58b37a..70089d3 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -80,6 +80,9 @@ struct evergreen_cs_track { bool cb_dirty; bool db_dirty; bool streamout_dirty; + u32 htile_offset; + u32 htile_surface; + struct radeon_bo *htile_bo; }; static u32 evergreen_cs_get_aray_mode(u32 tiling_flags) @@ -144,6 +147,9 @@ static void evergreen_cs_track_init(struct evergreen_cs_track *track) track->db_s_read_bo = NULL; track->db_s_write_bo = NULL; track->db_dirty = true; + track->htile_bo = NULL; + track->htile_offset = 0xFFFFFFFF; + track->htile_surface = 0; for (i = 0; i < 4; i++) { track->vgt_strmout_size[i] = 0; @@ -444,6 +450,62 @@ static int evergreen_cs_track_validate_cb(struct radeon_cs_parser *p, unsigned i return 0; } +static int evergreen_cs_track_validate_htile(struct radeon_cs_parser *p, + unsigned nbx, unsigned nby) +{ + struct evergreen_cs_track *track = p->track; + unsigned long size; + + if (track->htile_bo == NULL) { + dev_warn(p->dev, "%s:%d htile enabled without htile surface 0x%08x\n", + __func__, __LINE__, track->db_z_info); + return -EINVAL; + } + + if (G_028ABC_LINEAR(track->htile_surface)) { + /* pitch must be 16 htiles aligned == 16 * 8 pixel aligned */ + nbx = round_up(nbx, 16 * 8); + /* height is npipes htiles aligned == npipes * 8 pixel aligned */ + nby = round_up(nby, track->npipes * 8); + } else { + switch (track->npipes) { + case 8: + nbx = round_up(nbx, 64 * 8); + nby = round_up(nby, 64 * 8); + break; + case 4: + nbx = round_up(nbx, 64 * 8); + nby = round_up(nby, 32 * 8); + break; + case 2: + nbx = round_up(nbx, 32 * 8); + nby = round_up(nby, 32 * 8); + break; + case 1: + nbx = round_up(nbx, 32 * 8); + nby = round_up(nby, 16 * 8); + break; + default: + dev_warn(p->dev, "%s:%d invalid num pipes %d\n", + __func__, __LINE__, track->npipes); + return -EINVAL; + } + } + /* compute number of htile */ + nbx = nbx / 8; + nby = nby / 8; + size = nbx * nby * 4; + size += track->htile_offset; + + if (size > radeon_bo_size(track->htile_bo)) { + dev_warn(p->dev, "%s:%d htile surface too small %ld for %ld (%d %d)\n", + __func__, __LINE__, radeon_bo_size(track->htile_bo), + size, nbx, nby); + return -EINVAL; + } + return 0; +} + static int evergreen_cs_track_validate_stencil(struct radeon_cs_parser *p) { struct evergreen_cs_track *track = p->track; @@ -530,6 +592,14 @@ static int evergreen_cs_track_validate_stencil(struct radeon_cs_parser *p) return -EINVAL; } + /* hyperz */ + if (G_028040_TILE_SURFACE_ENABLE(track->db_z_info)) { + r = evergreen_cs_track_validate_htile(p, surf.nbx, surf.nby); + if (r) { + return r; + } + } + return 0; } @@ -617,6 +687,14 @@ static int evergreen_cs_track_validate_depth(struct radeon_cs_parser *p) return -EINVAL; } + /* hyperz */ + if (G_028040_TILE_SURFACE_ENABLE(track->db_z_info)) { + r = evergreen_cs_track_validate_htile(p, surf.nbx, surf.nby); + if (r) { + return r; + } + } + return 0; } @@ -850,7 +928,7 @@ static int evergreen_cs_track_check(struct radeon_cs_parser *p) return r; } /* Check depth buffer */ - if (G_028800_Z_WRITE_ENABLE(track->db_depth_control)) { + if (G_028800_Z_ENABLE(track->db_depth_control)) { r = evergreen_cs_track_validate_depth(p); if (r) return r; @@ -1616,6 +1694,23 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) track->cb_color_bo[tmp] = reloc->robj; track->cb_dirty = true; break; + case DB_HTILE_DATA_BASE: + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + track->htile_offset = radeon_get_ib_value(p, idx); + ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + track->htile_bo = reloc->robj; + track->db_dirty = true; + break; + case DB_HTILE_SURFACE: + /* 8x8 only */ + track->htile_surface = radeon_get_ib_value(p, idx); + track->db_dirty = true; + break; case CB_IMMED0_BASE: case CB_IMMED1_BASE: case CB_IMMED2_BASE: @@ -1628,7 +1723,6 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_IMMED9_BASE: case CB_IMMED10_BASE: case CB_IMMED11_BASE: - case DB_HTILE_DATA_BASE: case SQ_PGM_START_FS: case SQ_PGM_START_ES: case SQ_PGM_START_VS: diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index eb5708c..b4eefc3 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -991,6 +991,14 @@ #define G_028008_SLICE_MAX(x) (((x) >> 13) & 0x7FF) #define C_028008_SLICE_MAX 0xFF001FFF #define DB_HTILE_DATA_BASE 0x28014 +#define DB_HTILE_SURFACE 0x28abc +#define S_028ABC_HTILE_WIDTH(x) (((x) & 0x1) << 0) +#define G_028ABC_HTILE_WIDTH(x) (((x) >> 0) & 0x1) +#define C_028ABC_HTILE_WIDTH 0xFFFFFFFE +#define S_028ABC_HTILE_HEIGHT(x) (((x) & 0x1) << 1) +#define G_028ABC_HTILE_HEIGHT(x) (((x) >> 1) & 0x1) +#define C_028ABC_HTILE_HEIGHT 0xFFFFFFFD +#define G_028ABC_LINEAR(x) (((x) >> 2) & 0x1) #define DB_Z_INFO 0x28040 # define Z_ARRAY_MODE(x) ((x) << 4) # define DB_TILE_SPLIT(x) (((x) & 0x7) << 8) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 0ec3f20..b8e12af 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -78,6 +78,9 @@ struct r600_cs_track { bool cb_dirty; bool db_dirty; bool streamout_dirty; + struct radeon_bo *htile_bo; + u64 htile_offset; + u32 htile_surface; }; #define FMT_8_BIT(fmt, vc) [fmt] = { 1, 1, 1, vc, CHIP_R600 } @@ -321,6 +324,9 @@ static void r600_cs_track_init(struct r600_cs_track *track) track->db_depth_size_idx = 0; track->db_depth_control = 0xFFFFFFFF; track->db_dirty = true; + track->htile_bo = NULL; + track->htile_offset = 0xFFFFFFFF; + track->htile_surface = 0; for (i = 0; i < 4; i++) { track->vgt_strmout_size[i] = 0; @@ -455,12 +461,256 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) return 0; } +static int r600_cs_track_validate_db(struct radeon_cs_parser *p) +{ + struct r600_cs_track *track = p->track; + u32 nviews, bpe, ntiles, size, slice_tile_max, tmp; + u32 height_align, pitch_align, depth_align; + u32 pitch = 8192; + u32 height = 8192; + u64 base_offset, base_align; + struct array_mode_checker array_check; + int array_mode; + volatile u32 *ib = p->ib->ptr; + + + if (track->db_bo == NULL) { + dev_warn(p->dev, "z/stencil with no depth buffer\n"); + return -EINVAL; + } + switch (G_028010_FORMAT(track->db_depth_info)) { + case V_028010_DEPTH_16: + bpe = 2; + break; + case V_028010_DEPTH_X8_24: + case V_028010_DEPTH_8_24: + case V_028010_DEPTH_X8_24_FLOAT: + case V_028010_DEPTH_8_24_FLOAT: + case V_028010_DEPTH_32_FLOAT: + bpe = 4; + break; + case V_028010_DEPTH_X24_8_32_FLOAT: + bpe = 8; + break; + default: + dev_warn(p->dev, "z/stencil with invalid format %d\n", G_028010_FORMAT(track->db_depth_info)); + return -EINVAL; + } + if ((track->db_depth_size & 0xFFFFFC00) == 0xFFFFFC00) { + if (!track->db_depth_size_idx) { + dev_warn(p->dev, "z/stencil buffer size not set\n"); + return -EINVAL; + } + tmp = radeon_bo_size(track->db_bo) - track->db_offset; + tmp = (tmp / bpe) >> 6; + if (!tmp) { + dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %ld)\n", + track->db_depth_size, bpe, track->db_offset, + radeon_bo_size(track->db_bo)); + return -EINVAL; + } + ib[track->db_depth_size_idx] = S_028000_SLICE_TILE_MAX(tmp - 1) | (track->db_depth_size & 0x3FF); + } else { + size = radeon_bo_size(track->db_bo); + /* pitch in pixels */ + pitch = (G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1) * 8; + slice_tile_max = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1; + slice_tile_max *= 64; + height = slice_tile_max / pitch; + if (height > 8192) + height = 8192; + base_offset = track->db_bo_mc + track->db_offset; + array_mode = G_028010_ARRAY_MODE(track->db_depth_info); + array_check.array_mode = array_mode; + array_check.group_size = track->group_size; + array_check.nbanks = track->nbanks; + array_check.npipes = track->npipes; + array_check.nsamples = track->nsamples; + array_check.blocksize = bpe; + if (r600_get_array_mode_alignment(&array_check, + &pitch_align, &height_align, &depth_align, &base_align)) { + dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__, + G_028010_ARRAY_MODE(track->db_depth_info), + track->db_depth_info); + return -EINVAL; + } + switch (array_mode) { + case V_028010_ARRAY_1D_TILED_THIN1: + /* don't break userspace */ + height &= ~0x7; + break; + case V_028010_ARRAY_2D_TILED_THIN1: + break; + default: + dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__, + G_028010_ARRAY_MODE(track->db_depth_info), + track->db_depth_info); + return -EINVAL; + } + + if (!IS_ALIGNED(pitch, pitch_align)) { + dev_warn(p->dev, "%s:%d db pitch (%d, 0x%x, %d) invalid\n", + __func__, __LINE__, pitch, pitch_align, array_mode); + return -EINVAL; + } + if (!IS_ALIGNED(height, height_align)) { + dev_warn(p->dev, "%s:%d db height (%d, 0x%x, %d) invalid\n", + __func__, __LINE__, height, height_align, array_mode); + return -EINVAL; + } + if (!IS_ALIGNED(base_offset, base_align)) { + dev_warn(p->dev, "%s offset 0x%llx, 0x%llx, %d not aligned\n", __func__, + base_offset, base_align, array_mode); + return -EINVAL; + } + + ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1; + nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1; + tmp = ntiles * bpe * 64 * nviews; + if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) { + dev_warn(p->dev, "z/stencil buffer (%d) too small (0x%08X %d %d %d -> %u have %lu)\n", + array_mode, + track->db_depth_size, ntiles, nviews, bpe, tmp + track->db_offset, + radeon_bo_size(track->db_bo)); + return -EINVAL; + } + } + + /* hyperz */ + if (G_028010_TILE_SURFACE_ENABLE(track->db_depth_info)) { + unsigned long size; + unsigned nbx, nby; + + if (track->htile_bo == NULL) { + dev_warn(p->dev, "%s:%d htile enabled without htile surface 0x%08x\n", + __func__, __LINE__, track->db_depth_info); + return -EINVAL; + } + if ((track->db_depth_size & 0xFFFFFC00) == 0xFFFFFC00) { + dev_warn(p->dev, "%s:%d htile can't be enabled with bogus db_depth_size 0x%08x\n", + __func__, __LINE__, track->db_depth_size); + return -EINVAL; + } + + nbx = pitch; + nby = height; + if (G_028D24_LINEAR(track->htile_surface)) { + /* nbx must be 16 htiles aligned == 16 * 8 pixel aligned */ + nbx = round_up(nbx, 16 * 8); + /* nby is npipes htiles aligned == npipes * 8 pixel aligned */ + nby = round_up(nby, track->npipes * 8); + } else { + /* htile widht & nby (8 or 4) make 2 bits number */ + tmp = track->htile_surface & 3; + /* align is htile align * 8, htile align vary according to + * number of pipe and tile width and nby + */ + switch (track->npipes) { + case 8: + switch (tmp) { + case 3: /* HTILE_WIDTH = 8 & HTILE_HEIGHT = 8*/ + nbx = round_up(nbx, 64 * 8); + nby = round_up(nby, 64 * 8); + break; + case 2: /* HTILE_WIDTH = 4 & HTILE_HEIGHT = 8*/ + case 1: /* HTILE_WIDTH = 8 & HTILE_HEIGHT = 4*/ + nbx = round_up(nbx, 64 * 8); + nby = round_up(nby, 32 * 8); + break; + case 0: /* HTILE_WIDTH = 4 & HTILE_HEIGHT = 4*/ + nbx = round_up(nbx, 32 * 8); + nby = round_up(nby, 32 * 8); + break; + default: + return -EINVAL; + } + break; + case 4: + switch (tmp) { + case 3: /* HTILE_WIDTH = 8 & HTILE_HEIGHT = 8*/ + nbx = round_up(nbx, 64 * 8); + nby = round_up(nby, 32 * 8); + break; + case 2: /* HTILE_WIDTH = 4 & HTILE_HEIGHT = 8*/ + case 1: /* HTILE_WIDTH = 8 & HTILE_HEIGHT = 4*/ + nbx = round_up(nbx, 32 * 8); + nby = round_up(nby, 32 * 8); + break; + case 0: /* HTILE_WIDTH = 4 & HTILE_HEIGHT = 4*/ + nbx = round_up(nbx, 32 * 8); + nby = round_up(nby, 16 * 8); + break; + default: + return -EINVAL; + } + break; + case 2: + switch (tmp) { + case 3: /* HTILE_WIDTH = 8 & HTILE_HEIGHT = 8*/ + nbx = round_up(nbx, 32 * 8); + nby = round_up(nby, 32 * 8); + break; + case 2: /* HTILE_WIDTH = 4 & HTILE_HEIGHT = 8*/ + case 1: /* HTILE_WIDTH = 8 & HTILE_HEIGHT = 4*/ + nbx = round_up(nbx, 32 * 8); + nby = round_up(nby, 16 * 8); + break; + case 0: /* HTILE_WIDTH = 4 & HTILE_HEIGHT = 4*/ + nbx = round_up(nbx, 16 * 8); + nby = round_up(nby, 16 * 8); + break; + default: + return -EINVAL; + } + break; + case 1: + switch (tmp) { + case 3: /* HTILE_WIDTH = 8 & HTILE_HEIGHT = 8*/ + nbx = round_up(nbx, 32 * 8); + nby = round_up(nby, 16 * 8); + break; + case 2: /* HTILE_WIDTH = 4 & HTILE_HEIGHT = 8*/ + case 1: /* HTILE_WIDTH = 8 & HTILE_HEIGHT = 4*/ + nbx = round_up(nbx, 16 * 8); + nby = round_up(nby, 16 * 8); + break; + case 0: /* HTILE_WIDTH = 4 & HTILE_HEIGHT = 4*/ + nbx = round_up(nbx, 16 * 8); + nby = round_up(nby, 8 * 8); + break; + default: + return -EINVAL; + } + break; + default: + dev_warn(p->dev, "%s:%d invalid num pipes %d\n", + __func__, __LINE__, track->npipes); + return -EINVAL; + } + } + /* compute number of htile */ + nbx = G_028D24_HTILE_WIDTH(track->htile_surface) ? nbx / 8 : nbx / 4; + nby = G_028D24_HTILE_HEIGHT(track->htile_surface) ? nby / 8 : nby / 4; + size = nbx * nby * 4; + size += track->htile_offset; + + if (size > radeon_bo_size(track->htile_bo)) { + dev_warn(p->dev, "%s:%d htile surface too small %ld for %ld (%d %d)\n", + __func__, __LINE__, radeon_bo_size(track->htile_bo), + size, nbx, nby); + return -EINVAL; + } + } + + track->db_dirty = false; + return 0; +} + static int r600_cs_track_check(struct radeon_cs_parser *p) { struct r600_cs_track *track = p->track; u32 tmp; int r, i; - volatile u32 *ib = p->ib->ptr; /* on legacy kernel we don't perform advanced check */ if (p->rdev == NULL) @@ -513,124 +763,14 @@ static int r600_cs_track_check(struct radeon_cs_parser *p) track->cb_dirty = false; } - if (track->db_dirty) { - /* Check depth buffer */ - if (G_028800_STENCIL_ENABLE(track->db_depth_control) || - G_028800_Z_ENABLE(track->db_depth_control)) { - u32 nviews, bpe, ntiles, size, slice_tile_max; - u32 height, height_align, pitch, pitch_align, depth_align; - u64 base_offset, base_align; - struct array_mode_checker array_check; - int array_mode; - - if (track->db_bo == NULL) { - dev_warn(p->dev, "z/stencil with no depth buffer\n"); - return -EINVAL; - } - if (G_028010_TILE_SURFACE_ENABLE(track->db_depth_info)) { - dev_warn(p->dev, "this kernel doesn't support z/stencil htile\n"); - return -EINVAL; - } - switch (G_028010_FORMAT(track->db_depth_info)) { - case V_028010_DEPTH_16: - bpe = 2; - break; - case V_028010_DEPTH_X8_24: - case V_028010_DEPTH_8_24: - case V_028010_DEPTH_X8_24_FLOAT: - case V_028010_DEPTH_8_24_FLOAT: - case V_028010_DEPTH_32_FLOAT: - bpe = 4; - break; - case V_028010_DEPTH_X24_8_32_FLOAT: - bpe = 8; - break; - default: - dev_warn(p->dev, "z/stencil with invalid format %d\n", G_028010_FORMAT(track->db_depth_info)); - return -EINVAL; - } - if ((track->db_depth_size & 0xFFFFFC00) == 0xFFFFFC00) { - if (!track->db_depth_size_idx) { - dev_warn(p->dev, "z/stencil buffer size not set\n"); - return -EINVAL; - } - tmp = radeon_bo_size(track->db_bo) - track->db_offset; - tmp = (tmp / bpe) >> 6; - if (!tmp) { - dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %ld)\n", - track->db_depth_size, bpe, track->db_offset, - radeon_bo_size(track->db_bo)); - return -EINVAL; - } - ib[track->db_depth_size_idx] = S_028000_SLICE_TILE_MAX(tmp - 1) | (track->db_depth_size & 0x3FF); - } else { - size = radeon_bo_size(track->db_bo); - /* pitch in pixels */ - pitch = (G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1) * 8; - slice_tile_max = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1; - slice_tile_max *= 64; - height = slice_tile_max / pitch; - if (height > 8192) - height = 8192; - base_offset = track->db_bo_mc + track->db_offset; - array_mode = G_028010_ARRAY_MODE(track->db_depth_info); - array_check.array_mode = array_mode; - array_check.group_size = track->group_size; - array_check.nbanks = track->nbanks; - array_check.npipes = track->npipes; - array_check.nsamples = track->nsamples; - array_check.blocksize = bpe; - if (r600_get_array_mode_alignment(&array_check, - &pitch_align, &height_align, &depth_align, &base_align)) { - dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__, - G_028010_ARRAY_MODE(track->db_depth_info), - track->db_depth_info); - return -EINVAL; - } - switch (array_mode) { - case V_028010_ARRAY_1D_TILED_THIN1: - /* don't break userspace */ - height &= ~0x7; - break; - case V_028010_ARRAY_2D_TILED_THIN1: - break; - default: - dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__, - G_028010_ARRAY_MODE(track->db_depth_info), - track->db_depth_info); - return -EINVAL; - } - - if (!IS_ALIGNED(pitch, pitch_align)) { - dev_warn(p->dev, "%s:%d db pitch (%d, 0x%x, %d) invalid\n", - __func__, __LINE__, pitch, pitch_align, array_mode); - return -EINVAL; - } - if (!IS_ALIGNED(height, height_align)) { - dev_warn(p->dev, "%s:%d db height (%d, 0x%x, %d) invalid\n", - __func__, __LINE__, height, height_align, array_mode); - return -EINVAL; - } - if (!IS_ALIGNED(base_offset, base_align)) { - dev_warn(p->dev, "%s offset[%d] 0x%llx, 0x%llx, %d not aligned\n", __func__, i, - base_offset, base_align, array_mode); - return -EINVAL; - } - - ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1; - nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1; - tmp = ntiles * bpe * 64 * nviews; - if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) { - dev_warn(p->dev, "z/stencil buffer (%d) too small (0x%08X %d %d %d -> %u have %lu)\n", - array_mode, - track->db_depth_size, ntiles, nviews, bpe, tmp + track->db_offset, - radeon_bo_size(track->db_bo)); - return -EINVAL; - } - } - } - track->db_dirty = false; + /* Check depth buffer */ + if (track->db_dirty && (G_028800_STENCIL_ENABLE(track->db_depth_control) || + G_028800_Z_ENABLE(track->db_depth_control))) { + r = r600_cs_track_validate_db(p); + if (r) + return r; } + return 0; } @@ -1244,6 +1384,21 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) track->db_dirty = true; break; case DB_HTILE_DATA_BASE: + r = r600_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + track->htile_offset = radeon_get_ib_value(p, idx) << 8; + ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + track->htile_bo = reloc->robj; + track->db_dirty = true; + break; + case DB_HTILE_SURFACE: + track->htile_surface = radeon_get_ib_value(p, idx); + track->db_dirty = true; + break; case SQ_PGM_START_FS: case SQ_PGM_START_ES: case SQ_PGM_START_VS: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 3568a2e..59f9c99 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -195,6 +195,14 @@ #define PREZ_MUST_WAIT_FOR_POSTZ_DONE (1 << 31) #define DB_DEPTH_BASE 0x2800C #define DB_HTILE_DATA_BASE 0x28014 +#define DB_HTILE_SURFACE 0x28D24 +#define S_028D24_HTILE_WIDTH(x) (((x) & 0x1) << 0) +#define G_028D24_HTILE_WIDTH(x) (((x) >> 0) & 0x1) +#define C_028D24_HTILE_WIDTH 0xFFFFFFFE +#define S_028D24_HTILE_HEIGHT(x) (((x) & 0x1) << 1) +#define G_028D24_HTILE_HEIGHT(x) (((x) >> 1) & 0x1) +#define C_028D24_HTILE_HEIGHT 0xFFFFFFFD +#define G_028D24_LINEAR(x) (((x) >> 2) & 0x1) #define DB_WATERMARKS 0x9838 #define DEPTH_FREE(x) ((x) << 0) #define DEPTH_FLUSH(x) ((x) << 5) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 91541e6..6f70158 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -233,7 +233,17 @@ int radeon_bo_pin_restricted(struct radeon_bo *bo, u32 domain, u64 max_offset, bo->pin_count++; if (gpu_addr) *gpu_addr = radeon_bo_gpu_offset(bo); - WARN_ON_ONCE(max_offset != 0); + + if (max_offset != 0) { + u64 domain_start; + + if (domain == RADEON_GEM_DOMAIN_VRAM) + domain_start = bo->rdev->mc.vram_start; + else + domain_start = bo->rdev->mc.gtt_start; + WARN_ON_ONCE((*gpu_addr - domain_start) > max_offset); + } + return 0; } radeon_ttm_placement_from_domain(bo, domain); diff --git a/drivers/gpu/drm/radeon/reg_srcs/cayman b/drivers/gpu/drm/radeon/reg_srcs/cayman index aea63c4..0f656b1 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/cayman +++ b/drivers/gpu/drm/radeon/reg_srcs/cayman @@ -509,7 +509,6 @@ cayman 0x9400 0x00028AA8 IA_MULTI_VGT_PARAM 0x00028AB4 VGT_REUSE_OFF 0x00028AB8 VGT_VTX_CNT_EN -0x00028ABC DB_HTILE_SURFACE 0x00028AC0 DB_SRESULTS_COMPARE_STATE0 0x00028AC4 DB_SRESULTS_COMPARE_STATE1 0x00028AC8 DB_PRELOAD_CONTROL diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen index 77c3720..b912a37 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/evergreen +++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen @@ -519,7 +519,6 @@ evergreen 0x9400 0x00028AA4 VGT_INSTANCE_STEP_RATE_1 0x00028AB4 VGT_REUSE_OFF 0x00028AB8 VGT_VTX_CNT_EN -0x00028ABC DB_HTILE_SURFACE 0x00028AC0 DB_SRESULTS_COMPARE_STATE0 0x00028AC4 DB_SRESULTS_COMPARE_STATE1 0x00028AC8 DB_PRELOAD_CONTROL diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index 626c24e..5e659b0 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -713,7 +713,6 @@ r600 0x9400 0x0000A710 TD_VS_SAMPLER17_BORDER_RED 0x00009508 TA_CNTL_AUX 0x0002802C DB_DEPTH_CLEAR -0x00028D24 DB_HTILE_SURFACE 0x00028D34 DB_PREFETCH_LIMIT 0x00028D30 DB_PRELOAD_CONTROL 0x00028D0C DB_RENDER_CONTROL diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig new file mode 100644 index 0000000..d94e38d --- /dev/null +++ b/drivers/hsi/Kconfig @@ -0,0 +1,19 @@ +# +# HSI driver configuration +# +menuconfig HSI + tristate "HSI support" + ---help--- + The "High speed synchronous Serial Interface" is + synchronous serial interface used mainly to connect + application engines and cellular modems. + +if HSI + +config HSI_BOARDINFO + bool + default y + +source "drivers/hsi/clients/Kconfig" + +endif # HSI diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile new file mode 100644 index 0000000..9d5d33f --- /dev/null +++ b/drivers/hsi/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for HSI +# +obj-$(CONFIG_HSI_BOARDINFO) += hsi_boardinfo.o +obj-$(CONFIG_HSI) += hsi.o +obj-y += clients/ diff --git a/drivers/hsi/clients/Kconfig b/drivers/hsi/clients/Kconfig new file mode 100644 index 0000000..3bacd27 --- /dev/null +++ b/drivers/hsi/clients/Kconfig @@ -0,0 +1,13 @@ +# +# HSI clients configuration +# + +comment "HSI clients" + +config HSI_CHAR + tristate "HSI/SSI character driver" + depends on HSI + ---help--- + If you say Y here, you will enable the HSI/SSI character driver. + This driver provides a simple character device interface for + serial communication with the cellular modem over HSI/SSI bus. diff --git a/drivers/hsi/clients/Makefile b/drivers/hsi/clients/Makefile new file mode 100644 index 0000000..327c0e2 --- /dev/null +++ b/drivers/hsi/clients/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for HSI clients +# + +obj-$(CONFIG_HSI_CHAR) += hsi_char.o diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c new file mode 100644 index 0000000..88a050d --- /dev/null +++ b/drivers/hsi/clients/hsi_char.c @@ -0,0 +1,802 @@ +/* + * HSI character device driver, implements the character device + * interface. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos <andras.domokos@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/atomic.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/slab.h> +#include <linux/kmemleak.h> +#include <linux/ioctl.h> +#include <linux/wait.h> +#include <linux/fs.h> +#include <linux/sched.h> +#include <linux/device.h> +#include <linux/cdev.h> +#include <linux/uaccess.h> +#include <linux/scatterlist.h> +#include <linux/stat.h> +#include <linux/hsi/hsi.h> +#include <linux/hsi/hsi_char.h> + +#define HSC_DEVS 16 /* Num of channels */ +#define HSC_MSGS 4 + +#define HSC_RXBREAK 0 + +#define HSC_ID_BITS 6 +#define HSC_PORT_ID_BITS 4 +#define HSC_ID_MASK 3 +#define HSC_PORT_ID_MASK 3 +#define HSC_CH_MASK 0xf + +/* + * We support up to 4 controllers that can have up to 4 + * ports, which should currently be more than enough. + */ +#define HSC_BASEMINOR(id, port_id) \ + ((((id) & HSC_ID_MASK) << HSC_ID_BITS) | \ + (((port_id) & HSC_PORT_ID_MASK) << HSC_PORT_ID_BITS)) + +enum { + HSC_CH_OPEN, + HSC_CH_READ, + HSC_CH_WRITE, + HSC_CH_WLINE, +}; + +enum { + HSC_RX, + HSC_TX, +}; + +struct hsc_client_data; +/** + * struct hsc_channel - hsi_char internal channel data + * @ch: channel number + * @flags: Keeps state of the channel (open/close, reading, writing) + * @free_msgs_list: List of free HSI messages/requests + * @rx_msgs_queue: List of pending RX requests + * @tx_msgs_queue: List of pending TX requests + * @lock: Serialize access to the lists + * @cl: reference to the associated hsi_client + * @cl_data: reference to the client data that this channels belongs to + * @rx_wait: RX requests wait queue + * @tx_wait: TX requests wait queue + */ +struct hsc_channel { + unsigned int ch; + unsigned long flags; + struct list_head free_msgs_list; + struct list_head rx_msgs_queue; + struct list_head tx_msgs_queue; + spinlock_t lock; + struct hsi_client *cl; + struct hsc_client_data *cl_data; + wait_queue_head_t rx_wait; + wait_queue_head_t tx_wait; +}; + +/** + * struct hsc_client_data - hsi_char internal client data + * @cdev: Characther device associated to the hsi_client + * @lock: Lock to serialize open/close access + * @flags: Keeps track of port state (rx hwbreak armed) + * @usecnt: Use count for claiming the HSI port (mutex protected) + * @cl: Referece to the HSI client + * @channels: Array of channels accessible by the client + */ +struct hsc_client_data { + struct cdev cdev; + struct mutex lock; + unsigned long flags; + unsigned int usecnt; + struct hsi_client *cl; + struct hsc_channel channels[HSC_DEVS]; +}; + +/* Stores the major number dynamically allocated for hsi_char */ +static unsigned int hsc_major; +/* Maximum buffer size that hsi_char will accept from userspace */ +static unsigned int max_data_size = 0x1000; +module_param(max_data_size, uint, S_IRUSR | S_IWUSR); +MODULE_PARM_DESC(max_data_size, "max read/write data size [4,8..65536] (^2)"); + +static void hsc_add_tail(struct hsc_channel *channel, struct hsi_msg *msg, + struct list_head *queue) +{ + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + list_add_tail(&msg->link, queue); + spin_unlock_irqrestore(&channel->lock, flags); +} + +static struct hsi_msg *hsc_get_first_msg(struct hsc_channel *channel, + struct list_head *queue) +{ + struct hsi_msg *msg = NULL; + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + + if (list_empty(queue)) + goto out; + + msg = list_first_entry(queue, struct hsi_msg, link); + list_del(&msg->link); +out: + spin_unlock_irqrestore(&channel->lock, flags); + + return msg; +} + +static inline void hsc_msg_free(struct hsi_msg *msg) +{ + kfree(sg_virt(msg->sgt.sgl)); + hsi_free_msg(msg); +} + +static void hsc_free_list(struct list_head *list) +{ + struct hsi_msg *msg, *tmp; + + list_for_each_entry_safe(msg, tmp, list, link) { + list_del(&msg->link); + hsc_msg_free(msg); + } +} + +static void hsc_reset_list(struct hsc_channel *channel, struct list_head *l) +{ + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&channel->lock, flags); + list_splice_init(l, &list); + spin_unlock_irqrestore(&channel->lock, flags); + + hsc_free_list(&list); +} + +static inline struct hsi_msg *hsc_msg_alloc(unsigned int alloc_size) +{ + struct hsi_msg *msg; + void *buf; + + msg = hsi_alloc_msg(1, GFP_KERNEL); + if (!msg) + goto out; + buf = kmalloc(alloc_size, GFP_KERNEL); + if (!buf) { + hsi_free_msg(msg); + goto out; + } + sg_init_one(msg->sgt.sgl, buf, alloc_size); + /* Ignore false positive, due to sg pointer handling */ + kmemleak_ignore(buf); + + return msg; +out: + return NULL; +} + +static inline int hsc_msgs_alloc(struct hsc_channel *channel) +{ + struct hsi_msg *msg; + int i; + + for (i = 0; i < HSC_MSGS; i++) { + msg = hsc_msg_alloc(max_data_size); + if (!msg) + goto out; + msg->channel = channel->ch; + list_add_tail(&msg->link, &channel->free_msgs_list); + } + + return 0; +out: + hsc_free_list(&channel->free_msgs_list); + + return -ENOMEM; +} + +static inline unsigned int hsc_msg_len_get(struct hsi_msg *msg) +{ + return msg->sgt.sgl->length; +} + +static inline void hsc_msg_len_set(struct hsi_msg *msg, unsigned int len) +{ + msg->sgt.sgl->length = len; +} + +static void hsc_rx_completed(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels + msg->channel; + + if (test_bit(HSC_CH_READ, &channel->flags)) { + hsc_add_tail(channel, msg, &channel->rx_msgs_queue); + wake_up(&channel->rx_wait); + } else { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +} + +static void hsc_rx_msg_destructor(struct hsi_msg *msg) +{ + msg->status = HSI_STATUS_ERROR; + hsc_msg_len_set(msg, 0); + hsc_rx_completed(msg); +} + +static void hsc_tx_completed(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels + msg->channel; + + if (test_bit(HSC_CH_WRITE, &channel->flags)) { + hsc_add_tail(channel, msg, &channel->tx_msgs_queue); + wake_up(&channel->tx_wait); + } else { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +} + +static void hsc_tx_msg_destructor(struct hsi_msg *msg) +{ + msg->status = HSI_STATUS_ERROR; + hsc_msg_len_set(msg, 0); + hsc_tx_completed(msg); +} + +static void hsc_break_req_destructor(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + + hsi_free_msg(msg); + clear_bit(HSC_RXBREAK, &cl_data->flags); +} + +static void hsc_break_received(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels; + int i, ret; + + /* Broadcast HWBREAK on all channels */ + for (i = 0; i < HSC_DEVS; i++, channel++) { + struct hsi_msg *msg2; + + if (!test_bit(HSC_CH_READ, &channel->flags)) + continue; + msg2 = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg2) + continue; + clear_bit(HSC_CH_READ, &channel->flags); + hsc_msg_len_set(msg2, 0); + msg2->status = HSI_STATUS_COMPLETED; + hsc_add_tail(channel, msg2, &channel->rx_msgs_queue); + wake_up(&channel->rx_wait); + } + hsi_flush(msg->cl); + ret = hsi_async_read(msg->cl, msg); + if (ret < 0) + hsc_break_req_destructor(msg); +} + +static int hsc_break_request(struct hsi_client *cl) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(cl); + struct hsi_msg *msg; + int ret; + + if (test_and_set_bit(HSC_RXBREAK, &cl_data->flags)) + return -EBUSY; + + msg = hsi_alloc_msg(0, GFP_KERNEL); + if (!msg) { + clear_bit(HSC_RXBREAK, &cl_data->flags); + return -ENOMEM; + } + msg->break_frame = 1; + msg->complete = hsc_break_received; + msg->destructor = hsc_break_req_destructor; + ret = hsi_async_read(cl, msg); + if (ret < 0) + hsc_break_req_destructor(msg); + + return ret; +} + +static int hsc_break_send(struct hsi_client *cl) +{ + struct hsi_msg *msg; + int ret; + + msg = hsi_alloc_msg(0, GFP_ATOMIC); + if (!msg) + return -ENOMEM; + msg->break_frame = 1; + msg->complete = hsi_free_msg; + msg->destructor = hsi_free_msg; + ret = hsi_async_write(cl, msg); + if (ret < 0) + hsi_free_msg(msg); + + return ret; +} + +static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc) +{ + struct hsi_config tmp; + int ret; + + if ((rxc->mode != HSI_MODE_STREAM) && (rxc->mode != HSI_MODE_FRAME)) + return -EINVAL; + if ((rxc->channels == 0) || (rxc->channels > HSC_DEVS)) + return -EINVAL; + if (rxc->channels & (rxc->channels - 1)) + return -EINVAL; + if ((rxc->flow != HSI_FLOW_SYNC) && (rxc->flow != HSI_FLOW_PIPE)) + return -EINVAL; + tmp = cl->rx_cfg; + cl->rx_cfg.mode = rxc->mode; + cl->rx_cfg.channels = rxc->channels; + cl->rx_cfg.flow = rxc->flow; + ret = hsi_setup(cl); + if (ret < 0) { + cl->rx_cfg = tmp; + return ret; + } + if (rxc->mode == HSI_MODE_FRAME) + hsc_break_request(cl); + + return ret; +} + +static inline void hsc_rx_get(struct hsi_client *cl, struct hsc_rx_config *rxc) +{ + rxc->mode = cl->rx_cfg.mode; + rxc->channels = cl->rx_cfg.channels; + rxc->flow = cl->rx_cfg.flow; +} + +static int hsc_tx_set(struct hsi_client *cl, struct hsc_tx_config *txc) +{ + struct hsi_config tmp; + int ret; + + if ((txc->mode != HSI_MODE_STREAM) && (txc->mode != HSI_MODE_FRAME)) + return -EINVAL; + if ((txc->channels == 0) || (txc->channels > HSC_DEVS)) + return -EINVAL; + if (txc->channels & (txc->channels - 1)) + return -EINVAL; + if ((txc->arb_mode != HSI_ARB_RR) && (txc->arb_mode != HSI_ARB_PRIO)) + return -EINVAL; + tmp = cl->tx_cfg; + cl->tx_cfg.mode = txc->mode; + cl->tx_cfg.channels = txc->channels; + cl->tx_cfg.speed = txc->speed; + cl->tx_cfg.arb_mode = txc->arb_mode; + ret = hsi_setup(cl); + if (ret < 0) { + cl->tx_cfg = tmp; + return ret; + } + + return ret; +} + +static inline void hsc_tx_get(struct hsi_client *cl, struct hsc_tx_config *txc) +{ + txc->mode = cl->tx_cfg.mode; + txc->channels = cl->tx_cfg.channels; + txc->speed = cl->tx_cfg.speed; + txc->arb_mode = cl->tx_cfg.arb_mode; +} + +static ssize_t hsc_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos __maybe_unused) +{ + struct hsc_channel *channel = file->private_data; + struct hsi_msg *msg; + ssize_t ret; + + if (len == 0) + return 0; + if (!IS_ALIGNED(len, sizeof(u32))) + return -EINVAL; + if (len > max_data_size) + len = max_data_size; + if (channel->ch >= channel->cl->rx_cfg.channels) + return -ECHRNG; + if (test_and_set_bit(HSC_CH_READ, &channel->flags)) + return -EBUSY; + msg = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg) { + ret = -ENOSPC; + goto out; + } + hsc_msg_len_set(msg, len); + msg->complete = hsc_rx_completed; + msg->destructor = hsc_rx_msg_destructor; + ret = hsi_async_read(channel->cl, msg); + if (ret < 0) { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + goto out; + } + + ret = wait_event_interruptible(channel->rx_wait, + !list_empty(&channel->rx_msgs_queue)); + if (ret < 0) { + clear_bit(HSC_CH_READ, &channel->flags); + hsi_flush(channel->cl); + return -EINTR; + } + + msg = hsc_get_first_msg(channel, &channel->rx_msgs_queue); + if (msg) { + if (msg->status != HSI_STATUS_ERROR) { + ret = copy_to_user((void __user *)buf, + sg_virt(msg->sgt.sgl), hsc_msg_len_get(msg)); + if (ret) + ret = -EFAULT; + else + ret = hsc_msg_len_get(msg); + } else { + ret = -EIO; + } + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +out: + clear_bit(HSC_CH_READ, &channel->flags); + + return ret; +} + +static ssize_t hsc_write(struct file *file, const char __user *buf, size_t len, + loff_t *ppos __maybe_unused) +{ + struct hsc_channel *channel = file->private_data; + struct hsi_msg *msg; + ssize_t ret; + + if ((len == 0) || !IS_ALIGNED(len, sizeof(u32))) + return -EINVAL; + if (len > max_data_size) + len = max_data_size; + if (channel->ch >= channel->cl->tx_cfg.channels) + return -ECHRNG; + if (test_and_set_bit(HSC_CH_WRITE, &channel->flags)) + return -EBUSY; + msg = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg) { + clear_bit(HSC_CH_WRITE, &channel->flags); + return -ENOSPC; + } + if (copy_from_user(sg_virt(msg->sgt.sgl), (void __user *)buf, len)) { + ret = -EFAULT; + goto out; + } + hsc_msg_len_set(msg, len); + msg->complete = hsc_tx_completed; + msg->destructor = hsc_tx_msg_destructor; + ret = hsi_async_write(channel->cl, msg); + if (ret < 0) + goto out; + + ret = wait_event_interruptible(channel->tx_wait, + !list_empty(&channel->tx_msgs_queue)); + if (ret < 0) { + clear_bit(HSC_CH_WRITE, &channel->flags); + hsi_flush(channel->cl); + return -EINTR; + } + + msg = hsc_get_first_msg(channel, &channel->tx_msgs_queue); + if (msg) { + if (msg->status == HSI_STATUS_ERROR) + ret = -EIO; + else + ret = hsc_msg_len_get(msg); + + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +out: + clear_bit(HSC_CH_WRITE, &channel->flags); + + return ret; +} + +static long hsc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct hsc_channel *channel = file->private_data; + unsigned int state; + struct hsc_rx_config rxc; + struct hsc_tx_config txc; + long ret = 0; + + switch (cmd) { + case HSC_RESET: + hsi_flush(channel->cl); + break; + case HSC_SET_PM: + if (copy_from_user(&state, (void __user *)arg, sizeof(state))) + return -EFAULT; + if (state == HSC_PM_DISABLE) { + if (test_and_set_bit(HSC_CH_WLINE, &channel->flags)) + return -EINVAL; + ret = hsi_start_tx(channel->cl); + } else if (state == HSC_PM_ENABLE) { + if (!test_and_clear_bit(HSC_CH_WLINE, &channel->flags)) + return -EINVAL; + ret = hsi_stop_tx(channel->cl); + } else { + ret = -EINVAL; + } + break; + case HSC_SEND_BREAK: + return hsc_break_send(channel->cl); + case HSC_SET_RX: + if (copy_from_user(&rxc, (void __user *)arg, sizeof(rxc))) + return -EFAULT; + return hsc_rx_set(channel->cl, &rxc); + case HSC_GET_RX: + hsc_rx_get(channel->cl, &rxc); + if (copy_to_user((void __user *)arg, &rxc, sizeof(rxc))) + return -EFAULT; + break; + case HSC_SET_TX: + if (copy_from_user(&txc, (void __user *)arg, sizeof(txc))) + return -EFAULT; + return hsc_tx_set(channel->cl, &txc); + case HSC_GET_TX: + hsc_tx_get(channel->cl, &txc); + if (copy_to_user((void __user *)arg, &txc, sizeof(txc))) + return -EFAULT; + break; + default: + return -ENOIOCTLCMD; + } + + return ret; +} + +static inline void __hsc_port_release(struct hsc_client_data *cl_data) +{ + BUG_ON(cl_data->usecnt == 0); + + if (--cl_data->usecnt == 0) { + hsi_flush(cl_data->cl); + hsi_release_port(cl_data->cl); + } +} + +static int hsc_open(struct inode *inode, struct file *file) +{ + struct hsc_client_data *cl_data; + struct hsc_channel *channel; + int ret = 0; + + pr_debug("open, minor = %d\n", iminor(inode)); + + cl_data = container_of(inode->i_cdev, struct hsc_client_data, cdev); + mutex_lock(&cl_data->lock); + channel = cl_data->channels + (iminor(inode) & HSC_CH_MASK); + + if (test_and_set_bit(HSC_CH_OPEN, &channel->flags)) { + ret = -EBUSY; + goto out; + } + /* + * Check if we have already claimed the port associated to the HSI + * client. If not then try to claim it, else increase its refcount + */ + if (cl_data->usecnt == 0) { + ret = hsi_claim_port(cl_data->cl, 0); + if (ret < 0) + goto out; + hsi_setup(cl_data->cl); + } + cl_data->usecnt++; + + ret = hsc_msgs_alloc(channel); + if (ret < 0) { + __hsc_port_release(cl_data); + goto out; + } + + file->private_data = channel; + mutex_unlock(&cl_data->lock); + + return ret; +out: + mutex_unlock(&cl_data->lock); + + return ret; +} + +static int hsc_release(struct inode *inode __maybe_unused, struct file *file) +{ + struct hsc_channel *channel = file->private_data; + struct hsc_client_data *cl_data = channel->cl_data; + + mutex_lock(&cl_data->lock); + file->private_data = NULL; + if (test_and_clear_bit(HSC_CH_WLINE, &channel->flags)) + hsi_stop_tx(channel->cl); + __hsc_port_release(cl_data); + hsc_reset_list(channel, &channel->rx_msgs_queue); + hsc_reset_list(channel, &channel->tx_msgs_queue); + hsc_reset_list(channel, &channel->free_msgs_list); + clear_bit(HSC_CH_READ, &channel->flags); + clear_bit(HSC_CH_WRITE, &channel->flags); + clear_bit(HSC_CH_OPEN, &channel->flags); + wake_up(&channel->rx_wait); + wake_up(&channel->tx_wait); + mutex_unlock(&cl_data->lock); + + return 0; +} + +static const struct file_operations hsc_fops = { + .owner = THIS_MODULE, + .read = hsc_read, + .write = hsc_write, + .unlocked_ioctl = hsc_ioctl, + .open = hsc_open, + .release = hsc_release, +}; + +static void __devinit hsc_channel_init(struct hsc_channel *channel) +{ + init_waitqueue_head(&channel->rx_wait); + init_waitqueue_head(&channel->tx_wait); + spin_lock_init(&channel->lock); + INIT_LIST_HEAD(&channel->free_msgs_list); + INIT_LIST_HEAD(&channel->rx_msgs_queue); + INIT_LIST_HEAD(&channel->tx_msgs_queue); +} + +static int __devinit hsc_probe(struct device *dev) +{ + const char devname[] = "hsi_char"; + struct hsc_client_data *cl_data; + struct hsc_channel *channel; + struct hsi_client *cl = to_hsi_client(dev); + unsigned int hsc_baseminor; + dev_t hsc_dev; + int ret; + int i; + + cl_data = kzalloc(sizeof(*cl_data), GFP_KERNEL); + if (!cl_data) { + dev_err(dev, "Could not allocate hsc_client_data\n"); + return -ENOMEM; + } + hsc_baseminor = HSC_BASEMINOR(hsi_id(cl), hsi_port_id(cl)); + if (!hsc_major) { + ret = alloc_chrdev_region(&hsc_dev, hsc_baseminor, + HSC_DEVS, devname); + if (ret > 0) + hsc_major = MAJOR(hsc_dev); + } else { + hsc_dev = MKDEV(hsc_major, hsc_baseminor); + ret = register_chrdev_region(hsc_dev, HSC_DEVS, devname); + } + if (ret < 0) { + dev_err(dev, "Device %s allocation failed %d\n", + hsc_major ? "minor" : "major", ret); + goto out1; + } + mutex_init(&cl_data->lock); + hsi_client_set_drvdata(cl, cl_data); + cdev_init(&cl_data->cdev, &hsc_fops); + cl_data->cdev.owner = THIS_MODULE; + cl_data->cl = cl; + for (i = 0, channel = cl_data->channels; i < HSC_DEVS; i++, channel++) { + hsc_channel_init(channel); + channel->ch = i; + channel->cl = cl; + channel->cl_data = cl_data; + } + + /* 1 hsi client -> N char devices (one for each channel) */ + ret = cdev_add(&cl_data->cdev, hsc_dev, HSC_DEVS); + if (ret) { + dev_err(dev, "Could not add char device %d\n", ret); + goto out2; + } + + return 0; +out2: + unregister_chrdev_region(hsc_dev, HSC_DEVS); +out1: + kfree(cl_data); + + return ret; +} + +static int __devexit hsc_remove(struct device *dev) +{ + struct hsi_client *cl = to_hsi_client(dev); + struct hsc_client_data *cl_data = hsi_client_drvdata(cl); + dev_t hsc_dev = cl_data->cdev.dev; + + cdev_del(&cl_data->cdev); + unregister_chrdev_region(hsc_dev, HSC_DEVS); + hsi_client_set_drvdata(cl, NULL); + kfree(cl_data); + + return 0; +} + +static struct hsi_client_driver hsc_driver = { + .driver = { + .name = "hsi_char", + .owner = THIS_MODULE, + .probe = hsc_probe, + .remove = __devexit_p(hsc_remove), + }, +}; + +static int __init hsc_init(void) +{ + int ret; + + if ((max_data_size < 4) || (max_data_size > 0x10000) || + (max_data_size & (max_data_size - 1))) { + pr_err("Invalid max read/write data size"); + return -EINVAL; + } + + ret = hsi_register_client_driver(&hsc_driver); + if (ret) { + pr_err("Error while registering HSI/SSI driver %d", ret); + return ret; + } + + pr_info("HSI/SSI char device loaded\n"); + + return 0; +} +module_init(hsc_init); + +static void __exit hsc_exit(void) +{ + hsi_unregister_client_driver(&hsc_driver); + pr_info("HSI char device removed\n"); +} +module_exit(hsc_exit); + +MODULE_AUTHOR("Andras Domokos <andras.domokos@nokia.com>"); +MODULE_ALIAS("hsi:hsi_char"); +MODULE_DESCRIPTION("HSI character device"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c new file mode 100644 index 0000000..4e2d79b --- /dev/null +++ b/drivers/hsi/hsi.c @@ -0,0 +1,494 @@ +/* + * HSI core. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include <linux/hsi/hsi.h> +#include <linux/compiler.h> +#include <linux/rwsem.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/kobject.h> +#include <linux/slab.h> +#include <linux/string.h> +#include "hsi_core.h" + +static struct device_type hsi_ctrl = { + .name = "hsi_controller", +}; + +static struct device_type hsi_cl = { + .name = "hsi_client", +}; + +static struct device_type hsi_port = { + .name = "hsi_port", +}; + +static ssize_t modalias_show(struct device *dev, + struct device_attribute *a __maybe_unused, char *buf) +{ + return sprintf(buf, "hsi:%s\n", dev_name(dev)); +} + +static struct device_attribute hsi_bus_dev_attrs[] = { + __ATTR_RO(modalias), + __ATTR_NULL, +}; + +static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + if (dev->type == &hsi_cl) + add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); + + return 0; +} + +static int hsi_bus_match(struct device *dev, struct device_driver *driver) +{ + return strcmp(dev_name(dev), driver->name) == 0; +} + +static struct bus_type hsi_bus_type = { + .name = "hsi", + .dev_attrs = hsi_bus_dev_attrs, + .match = hsi_bus_match, + .uevent = hsi_bus_uevent, +}; + +static void hsi_client_release(struct device *dev) +{ + kfree(to_hsi_client(dev)); +} + +static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) +{ + struct hsi_client *cl; + unsigned long flags; + + cl = kzalloc(sizeof(*cl), GFP_KERNEL); + if (!cl) + return; + cl->device.type = &hsi_cl; + cl->tx_cfg = info->tx_cfg; + cl->rx_cfg = info->rx_cfg; + cl->device.bus = &hsi_bus_type; + cl->device.parent = &port->device; + cl->device.release = hsi_client_release; + dev_set_name(&cl->device, info->name); + cl->device.platform_data = info->platform_data; + spin_lock_irqsave(&port->clock, flags); + list_add_tail(&cl->link, &port->clients); + spin_unlock_irqrestore(&port->clock, flags); + if (info->archdata) + cl->device.archdata = *info->archdata; + if (device_register(&cl->device) < 0) { + pr_err("hsi: failed to register client: %s\n", info->name); + kfree(cl); + } +} + +static void hsi_scan_board_info(struct hsi_controller *hsi) +{ + struct hsi_cl_info *cl_info; + struct hsi_port *p; + + list_for_each_entry(cl_info, &hsi_board_list, list) + if (cl_info->info.hsi_id == hsi->id) { + p = hsi_find_port_num(hsi, cl_info->info.port); + if (!p) + continue; + hsi_new_client(p, &cl_info->info); + } +} + +static int hsi_remove_client(struct device *dev, void *data __maybe_unused) +{ + struct hsi_client *cl = to_hsi_client(dev); + struct hsi_port *port = to_hsi_port(dev->parent); + unsigned long flags; + + spin_lock_irqsave(&port->clock, flags); + list_del(&cl->link); + spin_unlock_irqrestore(&port->clock, flags); + device_unregister(dev); + + return 0; +} + +static int hsi_remove_port(struct device *dev, void *data __maybe_unused) +{ + device_for_each_child(dev, NULL, hsi_remove_client); + device_unregister(dev); + + return 0; +} + +static void hsi_controller_release(struct device *dev __maybe_unused) +{ +} + +static void hsi_port_release(struct device *dev __maybe_unused) +{ +} + +/** + * hsi_unregister_controller - Unregister an HSI controller + * @hsi: The HSI controller to register + */ +void hsi_unregister_controller(struct hsi_controller *hsi) +{ + device_for_each_child(&hsi->device, NULL, hsi_remove_port); + device_unregister(&hsi->device); +} +EXPORT_SYMBOL_GPL(hsi_unregister_controller); + +/** + * hsi_register_controller - Register an HSI controller and its ports + * @hsi: The HSI controller to register + * + * Returns -errno on failure, 0 on success. + */ +int hsi_register_controller(struct hsi_controller *hsi) +{ + unsigned int i; + int err; + + hsi->device.type = &hsi_ctrl; + hsi->device.bus = &hsi_bus_type; + hsi->device.release = hsi_controller_release; + err = device_register(&hsi->device); + if (err < 0) + return err; + for (i = 0; i < hsi->num_ports; i++) { + hsi->port[i].device.parent = &hsi->device; + hsi->port[i].device.bus = &hsi_bus_type; + hsi->port[i].device.release = hsi_port_release; + hsi->port[i].device.type = &hsi_port; + INIT_LIST_HEAD(&hsi->port[i].clients); + spin_lock_init(&hsi->port[i].clock); + err = device_register(&hsi->port[i].device); + if (err < 0) + goto out; + } + /* Populate HSI bus with HSI clients */ + hsi_scan_board_info(hsi); + + return 0; +out: + hsi_unregister_controller(hsi); + + return err; +} +EXPORT_SYMBOL_GPL(hsi_register_controller); + +/** + * hsi_register_client_driver - Register an HSI client to the HSI bus + * @drv: HSI client driver to register + * + * Returns -errno on failure, 0 on success. + */ +int hsi_register_client_driver(struct hsi_client_driver *drv) +{ + drv->driver.bus = &hsi_bus_type; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(hsi_register_client_driver); + +static inline int hsi_dummy_msg(struct hsi_msg *msg __maybe_unused) +{ + return 0; +} + +static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) +{ + return 0; +} + +/** + * hsi_alloc_controller - Allocate an HSI controller and its ports + * @n_ports: Number of ports on the HSI controller + * @flags: Kernel allocation flags + * + * Return NULL on failure or a pointer to an hsi_controller on success. + */ +struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) +{ + struct hsi_controller *hsi; + struct hsi_port *port; + unsigned int i; + + if (!n_ports) + return NULL; + + port = kzalloc(sizeof(*port)*n_ports, flags); + if (!port) + return NULL; + hsi = kzalloc(sizeof(*hsi), flags); + if (!hsi) + goto out; + for (i = 0; i < n_ports; i++) { + dev_set_name(&port[i].device, "port%d", i); + port[i].num = i; + port[i].async = hsi_dummy_msg; + port[i].setup = hsi_dummy_cl; + port[i].flush = hsi_dummy_cl; + port[i].start_tx = hsi_dummy_cl; + port[i].stop_tx = hsi_dummy_cl; + port[i].release = hsi_dummy_cl; + mutex_init(&port[i].lock); + } + hsi->num_ports = n_ports; + hsi->port = port; + + return hsi; +out: + kfree(port); + + return NULL; +} +EXPORT_SYMBOL_GPL(hsi_alloc_controller); + +/** + * hsi_free_controller - Free an HSI controller + * @hsi: Pointer to HSI controller + */ +void hsi_free_controller(struct hsi_controller *hsi) +{ + if (!hsi) + return; + + kfree(hsi->port); + kfree(hsi); +} +EXPORT_SYMBOL_GPL(hsi_free_controller); + +/** + * hsi_free_msg - Free an HSI message + * @msg: Pointer to the HSI message + * + * Client is responsible to free the buffers pointed by the scatterlists. + */ +void hsi_free_msg(struct hsi_msg *msg) +{ + if (!msg) + return; + sg_free_table(&msg->sgt); + kfree(msg); +} +EXPORT_SYMBOL_GPL(hsi_free_msg); + +/** + * hsi_alloc_msg - Allocate an HSI message + * @nents: Number of memory entries + * @flags: Kernel allocation flags + * + * nents can be 0. This mainly makes sense for read transfer. + * In that case, HSI drivers will call the complete callback when + * there is data to be read without consuming it. + * + * Return NULL on failure or a pointer to an hsi_msg on success. + */ +struct hsi_msg *hsi_alloc_msg(unsigned int nents, gfp_t flags) +{ + struct hsi_msg *msg; + int err; + + msg = kzalloc(sizeof(*msg), flags); + if (!msg) + return NULL; + + if (!nents) + return msg; + + err = sg_alloc_table(&msg->sgt, nents, flags); + if (unlikely(err)) { + kfree(msg); + msg = NULL; + } + + return msg; +} +EXPORT_SYMBOL_GPL(hsi_alloc_msg); + +/** + * hsi_async - Submit an HSI transfer to the controller + * @cl: HSI client sending the transfer + * @msg: The HSI transfer passed to controller + * + * The HSI message must have the channel, ttype, complete and destructor + * fields set beforehand. If nents > 0 then the client has to initialize + * also the scatterlists to point to the buffers to write to or read from. + * + * HSI controllers relay on pre-allocated buffers from their clients and they + * do not allocate buffers on their own. + * + * Once the HSI message transfer finishes, the HSI controller calls the + * complete callback with the status and actual_len fields of the HSI message + * updated. The complete callback can be called before returning from + * hsi_async. + * + * Returns -errno on failure or 0 on success + */ +int hsi_async(struct hsi_client *cl, struct hsi_msg *msg) +{ + struct hsi_port *port = hsi_get_port(cl); + + if (!hsi_port_claimed(cl)) + return -EACCES; + + WARN_ON_ONCE(!msg->destructor || !msg->complete); + msg->cl = cl; + + return port->async(msg); +} +EXPORT_SYMBOL_GPL(hsi_async); + +/** + * hsi_claim_port - Claim the HSI client's port + * @cl: HSI client that wants to claim its port + * @share: Flag to indicate if the client wants to share the port or not. + * + * Returns -errno on failure, 0 on success. + */ +int hsi_claim_port(struct hsi_client *cl, unsigned int share) +{ + struct hsi_port *port = hsi_get_port(cl); + int err = 0; + + mutex_lock(&port->lock); + if ((port->claimed) && (!port->shared || !share)) { + err = -EBUSY; + goto out; + } + if (!try_module_get(to_hsi_controller(port->device.parent)->owner)) { + err = -ENODEV; + goto out; + } + port->claimed++; + port->shared = !!share; + cl->pclaimed = 1; +out: + mutex_unlock(&port->lock); + + return err; +} +EXPORT_SYMBOL_GPL(hsi_claim_port); + +/** + * hsi_release_port - Release the HSI client's port + * @cl: HSI client which previously claimed its port + */ +void hsi_release_port(struct hsi_client *cl) +{ + struct hsi_port *port = hsi_get_port(cl); + + mutex_lock(&port->lock); + /* Allow HW driver to do some cleanup */ + port->release(cl); + if (cl->pclaimed) + port->claimed--; + BUG_ON(port->claimed < 0); + cl->pclaimed = 0; + if (!port->claimed) + port->shared = 0; + module_put(to_hsi_controller(port->device.parent)->owner); + mutex_unlock(&port->lock); +} +EXPORT_SYMBOL_GPL(hsi_release_port); + +static int hsi_start_rx(struct hsi_client *cl, void *data __maybe_unused) +{ + if (cl->hsi_start_rx) + (*cl->hsi_start_rx)(cl); + + return 0; +} + +static int hsi_stop_rx(struct hsi_client *cl, void *data __maybe_unused) +{ + if (cl->hsi_stop_rx) + (*cl->hsi_stop_rx)(cl); + + return 0; +} + +static int hsi_port_for_each_client(struct hsi_port *port, void *data, + int (*fn)(struct hsi_client *cl, void *data)) +{ + struct hsi_client *cl; + + spin_lock(&port->clock); + list_for_each_entry(cl, &port->clients, link) { + spin_unlock(&port->clock); + (*fn)(cl, data); + spin_lock(&port->clock); + } + spin_unlock(&port->clock); + + return 0; +} + +/** + * hsi_event -Notifies clients about port events + * @port: Port where the event occurred + * @event: The event type + * + * Clients should not be concerned about wake line behavior. However, due + * to a race condition in HSI HW protocol, clients need to be notified + * about wake line changes, so they can implement a workaround for it. + * + * Events: + * HSI_EVENT_START_RX - Incoming wake line high + * HSI_EVENT_STOP_RX - Incoming wake line down + */ +void hsi_event(struct hsi_port *port, unsigned int event) +{ + int (*fn)(struct hsi_client *cl, void *data); + + switch (event) { + case HSI_EVENT_START_RX: + fn = hsi_start_rx; + break; + case HSI_EVENT_STOP_RX: + fn = hsi_stop_rx; + break; + default: + return; + } + hsi_port_for_each_client(port, NULL, fn); +} +EXPORT_SYMBOL_GPL(hsi_event); + +static int __init hsi_init(void) +{ + return bus_register(&hsi_bus_type); +} +postcore_initcall(hsi_init); + +static void __exit hsi_exit(void) +{ + bus_unregister(&hsi_bus_type); +} +module_exit(hsi_exit); + +MODULE_AUTHOR("Carlos Chinea <carlos.chinea@nokia.com>"); +MODULE_DESCRIPTION("High-speed Synchronous Serial Interface (HSI) framework"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hsi/hsi_boardinfo.c b/drivers/hsi/hsi_boardinfo.c new file mode 100644 index 0000000..e56bc6d --- /dev/null +++ b/drivers/hsi/hsi_boardinfo.c @@ -0,0 +1,62 @@ +/* + * HSI clients registration interface + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include <linux/hsi/hsi.h> +#include <linux/list.h> +#include <linux/slab.h> +#include "hsi_core.h" + +/* + * hsi_board_list is only used internally by the HSI framework. + * No one else is allowed to make use of it. + */ +LIST_HEAD(hsi_board_list); +EXPORT_SYMBOL_GPL(hsi_board_list); + +/** + * hsi_register_board_info - Register HSI clients information + * @info: Array of HSI clients on the board + * @len: Length of the array + * + * HSI clients are statically declared and registered on board files. + * + * HSI clients will be automatically registered to the HSI bus once the + * controller and the port where the clients wishes to attach are registered + * to it. + * + * Return -errno on failure, 0 on success. + */ +int __init hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len) +{ + struct hsi_cl_info *cl_info; + + cl_info = kzalloc(sizeof(*cl_info) * len, GFP_KERNEL); + if (!cl_info) + return -ENOMEM; + + for (; len; len--, info++, cl_info++) { + cl_info->info = *info; + list_add_tail(&cl_info->list, &hsi_board_list); + } + + return 0; +} diff --git a/drivers/hsi/hsi_core.h b/drivers/hsi/hsi_core.h new file mode 100644 index 0000000..ab5c2fb --- /dev/null +++ b/drivers/hsi/hsi_core.h @@ -0,0 +1,35 @@ +/* + * HSI framework internal interfaces, + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea <carlos.chinea@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_HSI_CORE_H__ +#define __LINUX_HSI_CORE_H__ + +#include <linux/hsi/hsi.h> + +struct hsi_cl_info { + struct list_head list; + struct hsi_board_info info; +}; + +extern struct list_head hsi_board_list; + +#endif /* __LINUX_HSI_CORE_H__ */ diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 8305d29..519ce8b 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -53,8 +53,8 @@ static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* Insmod parameters */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c index 6c6b240..ce86c5e 100644 --- a/drivers/hwmon/mc13783-adc.c +++ b/drivers/hwmon/mc13783-adc.c @@ -59,7 +59,7 @@ static int mc13783_adc_read(struct device *dev, ret = mc13xxx_adc_do_conversion(priv->mc13xxx, MC13XXX_ADC_MODE_MULT_CHAN, - channel, sample); + channel, 0, 0, sample); if (ret) return ret; diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 834e49d..d6b0bdd 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -71,8 +71,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes. 2<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index acba1c6..7f0b832 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. * ------------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki @@ -111,7 +112,7 @@ static int sclhi(struct i2c_algo_bit_data *adap) break; return -ETIMEDOUT; } - cond_resched(); + cpu_relax(); } #ifdef DEBUG if (jiffies != start && i2c_debug >= 3) diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index beb9ffe..73133b1 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -15,7 +15,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 5eebf56..5c23795 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -16,7 +16,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. * * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and * Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey diff --git a/drivers/i2c/algos/i2c-algo-pcf.h b/drivers/i2c/algos/i2c-algo-pcf.h index 5263a9e..1ec703e 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.h +++ b/drivers/i2c/algos/i2c-algo-pcf.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* -------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard <frodol@dds.nl> */ diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 71c1b0a..d2c5095 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -103,6 +103,7 @@ config I2C_I801 Patsburg (PCH) DH89xxCC (PCH) Panther Point (PCH) + Lynx Point (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 8679648..ed9f48d 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -19,7 +19,6 @@ #include <mach/hardware.h> #include <asm/hardware/ioc.h> -#include <asm/system.h> #define FORCE_ONES 0xdc #define SCL 0x02 diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index a651779..c0330a4 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -14,8 +14,15 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/platform_device.h> - -#include <asm/gpio.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/of_i2c.h> + +struct i2c_gpio_private_data { + struct i2c_adapter adap; + struct i2c_algo_bit_data bit_data; + struct i2c_gpio_platform_data pdata; +}; /* Toggle SDA by changing the direction of the pin */ static void i2c_gpio_setsda_dir(void *data, int state) @@ -78,24 +85,62 @@ static int i2c_gpio_getscl(void *data) return gpio_get_value(pdata->scl_pin); } +static int __devinit of_i2c_gpio_probe(struct device_node *np, + struct i2c_gpio_platform_data *pdata) +{ + u32 reg; + + if (of_gpio_count(np) < 2) + return -ENODEV; + + pdata->sda_pin = of_get_gpio(np, 0); + pdata->scl_pin = of_get_gpio(np, 1); + + if (!gpio_is_valid(pdata->sda_pin) || !gpio_is_valid(pdata->scl_pin)) { + pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n", + np->full_name, pdata->sda_pin, pdata->scl_pin); + return -ENODEV; + } + + of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay); + + if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", ®)) + pdata->timeout = msecs_to_jiffies(reg); + + pdata->sda_is_open_drain = + of_property_read_bool(np, "i2c-gpio,sda-open-drain"); + pdata->scl_is_open_drain = + of_property_read_bool(np, "i2c-gpio,scl-open-drain"); + pdata->scl_is_output_only = + of_property_read_bool(np, "i2c-gpio,scl-output-only"); + + return 0; +} + static int __devinit i2c_gpio_probe(struct platform_device *pdev) { + struct i2c_gpio_private_data *priv; struct i2c_gpio_platform_data *pdata; struct i2c_algo_bit_data *bit_data; struct i2c_adapter *adap; int ret; - pdata = pdev->dev.platform_data; - if (!pdata) - return -ENXIO; - - ret = -ENOMEM; - adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (!adap) - goto err_alloc_adap; - bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL); - if (!bit_data) - goto err_alloc_bit_data; + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + adap = &priv->adap; + bit_data = &priv->bit_data; + pdata = &priv->pdata; + + if (pdev->dev.of_node) { + ret = of_i2c_gpio_probe(pdev->dev.of_node, pdata); + if (ret) + return ret; + } else { + if (!pdev->dev.platform_data) + return -ENXIO; + memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); + } ret = gpio_request(pdata->sda_pin, "sda"); if (ret) @@ -143,6 +188,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev) adap->algo_data = bit_data; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; /* * If "dev->id" is negative we consider it as zero. @@ -154,7 +200,9 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev) if (ret) goto err_add_bus; - platform_set_drvdata(pdev, adap); + of_i2c_register_devices(adap); + + platform_set_drvdata(pdev, priv); dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", pdata->sda_pin, pdata->scl_pin, @@ -168,34 +216,40 @@ err_add_bus: err_request_scl: gpio_free(pdata->sda_pin); err_request_sda: - kfree(bit_data); -err_alloc_bit_data: - kfree(adap); -err_alloc_adap: return ret; } static int __devexit i2c_gpio_remove(struct platform_device *pdev) { + struct i2c_gpio_private_data *priv; struct i2c_gpio_platform_data *pdata; struct i2c_adapter *adap; - adap = platform_get_drvdata(pdev); - pdata = pdev->dev.platform_data; + priv = platform_get_drvdata(pdev); + adap = &priv->adap; + pdata = &priv->pdata; i2c_del_adapter(adap); gpio_free(pdata->scl_pin); gpio_free(pdata->sda_pin); - kfree(adap->algo_data); - kfree(adap); return 0; } +#if defined(CONFIG_OF) +static const struct of_device_id i2c_gpio_dt_ids[] = { + { .compatible = "i2c-gpio", }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids); +#endif + static struct platform_driver i2c_gpio_driver = { .driver = { .name = "i2c-gpio", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(i2c_gpio_dt_ids), }, .probe = i2c_gpio_probe, .remove = __devexit_p(i2c_gpio_remove), diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 5d2e281..ae2945a 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -2,7 +2,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker <mdsxyz123@yahoo.com> - Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2007 - 2012 Jean Delvare <khali@linux-fr.org> Copyright (C) 2010 Intel Corporation, David Woodhouse <dwmw2@infradead.org> @@ -51,6 +51,7 @@ Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes DH89xxCC (PCH) 0x2330 32 hard yes yes yes Panther Point (PCH) 0x1e22 32 hard yes yes yes + Lynx Point (PCH) 0x8c22 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -105,7 +106,7 @@ #define SMBHSTCNT_KILL 2 /* Other settings */ -#define MAX_TIMEOUT 100 +#define MAX_RETRIES 400 #define ENABLE_INT9 0 /* set to 0x01 to enable - untested */ /* I801 command constants */ @@ -145,6 +146,7 @@ #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 struct i801_priv { struct i2c_adapter adapter; @@ -215,7 +217,7 @@ static int i801_check_post(struct i801_priv *priv, int status, int timeout) dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, SMBHSTCNT(priv)); - msleep(1); + usleep_range(1000, 2000); outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), SMBHSTCNT(priv)); @@ -272,11 +274,11 @@ static int i801_transaction(struct i801_priv *priv, int xact) /* We will always wait for a fraction of a second! */ do { - msleep(1); + usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); - } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); + } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES)); - result = i801_check_post(priv, status, timeout > MAX_TIMEOUT); + result = i801_check_post(priv, status, timeout > MAX_RETRIES); if (result < 0) return result; @@ -291,12 +293,12 @@ static void i801_wait_hwpec(struct i801_priv *priv) int status; do { - msleep(1); + usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); } while ((!(status & SMBHSTSTS_INTR)) - && (timeout++ < MAX_TIMEOUT)); + && (timeout++ < MAX_RETRIES)); - if (timeout > MAX_TIMEOUT) + if (timeout > MAX_RETRIES) dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n"); outb_p(status, SMBHSTSTS(priv)); @@ -380,12 +382,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, /* We will always wait for a fraction of a second! */ timeout = 0; do { - msleep(1); + usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); } while ((!(status & SMBHSTSTS_BYTE_DONE)) - && (timeout++ < MAX_TIMEOUT)); + && (timeout++ < MAX_RETRIES)); - result = i801_check_post(priv, status, timeout > MAX_TIMEOUT); + result = i801_check_post(priv, status, timeout > MAX_RETRIES); if (result < 0) return result; @@ -633,6 +635,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index 6561d27..f90a605 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -47,7 +47,7 @@ #define SMBBLKDAT (0x20 + sch_smba) /* Other settings */ -#define MAX_TIMEOUT 500 +#define MAX_RETRIES 5000 /* I2C constants */ #define SCH_QUICK 0x00 @@ -68,7 +68,7 @@ static int sch_transaction(void) { int temp; int result = 0; - int timeout = 0; + int retries = 0; dev_dbg(&sch_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT), @@ -100,12 +100,12 @@ static int sch_transaction(void) outb(inb(SMBHSTCNT) | 0x10, SMBHSTCNT); do { - msleep(1); + usleep_range(100, 200); temp = inb(SMBHSTSTS) & 0x0f; - } while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT)); + } while ((temp & 0x08) && (retries++ < MAX_RETRIES)); /* If the SMBus is still busy, we give up */ - if (timeout > MAX_TIMEOUT) { + if (retries > MAX_RETRIES) { dev_err(&sch_adapter.dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index 10274ff..f24cc64 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -13,7 +13,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index e9c1893..feb7dc3 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -14,7 +14,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>. diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 9f9c57f..18a8fd2 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -13,7 +13,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include <linux/rwsem.h> diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 10e7f1e..4504832 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -17,7 +17,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* Note that this is a complete rewrite of Simon Vogl's i2c-dev module. diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index f61ccc1..9836d08 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -16,7 +16,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/muxes/pca9541.c b/drivers/i2c/muxes/pca9541.c index ed699c5..e0df9b6 100644 --- a/drivers/i2c/muxes/pca9541.c +++ b/drivers/i2c/muxes/pca9541.c @@ -393,18 +393,7 @@ static struct i2c_driver pca9541_driver = { .id_table = pca9541_id, }; -static int __init pca9541_init(void) -{ - return i2c_add_driver(&pca9541_driver); -} - -static void __exit pca9541_exit(void) -{ - i2c_del_driver(&pca9541_driver); -} - -module_init(pca9541_init); -module_exit(pca9541_exit); +module_i2c_driver(pca9541_driver); MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); MODULE_DESCRIPTION("PCA9541 I2C master selector driver"); diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c index 6f89536..0e37ef2 100644 --- a/drivers/i2c/muxes/pca954x.c +++ b/drivers/i2c/muxes/pca954x.c @@ -284,18 +284,7 @@ static struct i2c_driver pca954x_driver = { .id_table = pca954x_id, }; -static int __init pca954x_init(void) -{ - return i2c_add_driver(&pca954x_driver); -} - -static void __exit pca954x_exit(void) -{ - i2c_del_driver(&pca954x_driver); -} - -module_init(pca954x_init); -module_exit(pca954x_exit); +module_i2c_driver(pca954x_driver); MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); MODULE_DESCRIPTION("PCA954x I2C mux/switch driver"); diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index d2f3db3..28e344e 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -41,7 +41,6 @@ #include <linux/major.h> #include <linux/delay.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 8bbfe55..e03f4f1 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -29,7 +29,6 @@ #include <linux/blkdev.h> #include <linux/ide.h> #include <linux/init.h> -#include <asm/system.h> #include <asm/io.h> #define DRV_NAME "qd65xx" diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index 9a3fbfc..fd05f48 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -42,7 +42,6 @@ */ -#include <asm/system.h> #include "ehca_classes.h" #include "ehca_tools.h" #include "ehca_qes.h" diff --git a/drivers/input/input-compat.c b/drivers/input/input-compat.c index e46a867..64ca711 100644 --- a/drivers/input/input-compat.c +++ b/drivers/input/input-compat.c @@ -17,7 +17,7 @@ int input_event_from_user(const char __user *buffer, struct input_event *event) { - if (INPUT_COMPAT_TEST) { + if (INPUT_COMPAT_TEST && !COMPAT_USE_64BIT_TIME) { struct input_event_compat compat_event; if (copy_from_user(&compat_event, buffer, @@ -41,7 +41,7 @@ int input_event_from_user(const char __user *buffer, int input_event_to_user(char __user *buffer, const struct input_event *event) { - if (INPUT_COMPAT_TEST) { + if (INPUT_COMPAT_TEST && !COMPAT_USE_64BIT_TIME) { struct input_event_compat compat_event; compat_event.time.tv_sec = event->time.tv_sec; diff --git a/drivers/input/input-compat.h b/drivers/input/input-compat.h index 22be27b..148f66f 100644 --- a/drivers/input/input-compat.h +++ b/drivers/input/input-compat.h @@ -67,7 +67,7 @@ struct ff_effect_compat { static inline size_t input_event_size(void) { - return INPUT_COMPAT_TEST ? + return (INPUT_COMPAT_TEST && !COMPAT_USE_64BIT_TIME) ? sizeof(struct input_event_compat) : sizeof(struct input_event); } diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index c24ec2d..26043cc 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -13,7 +13,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <asm/io.h> -#include <asm/system.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/joystick.h> diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c index 0bc8620..c65b5fa 100644 --- a/drivers/input/joystick/amijoy.c +++ b/drivers/input/joystick/amijoy.c @@ -35,7 +35,6 @@ #include <linux/interrupt.h> #include <linux/mutex.h> -#include <asm/system.h> #include <asm/amigahw.h> #include <asm/amigaints.h> @@ -108,6 +107,9 @@ static int __init amijoy_init(void) int i, j; int err; + if (!MACH_IS_AMIGA) + return -ENODEV; + for (i = 0; i < 2; i++) { if (!amijoy[i]) continue; diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index ed1ed46..62bfce4 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -28,14 +28,18 @@ #include <linux/gpio.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> +#include <linux/spinlock.h> struct gpio_button_data { - struct gpio_keys_button *button; + const struct gpio_keys_button *button; struct input_dev *input; struct timer_list timer; struct work_struct work; - int timer_debounce; /* in msecs */ + unsigned int timer_debounce; /* in msecs */ + unsigned int irq; + spinlock_t lock; bool disabled; + bool key_pressed; }; struct gpio_keys_drvdata { @@ -114,7 +118,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata) /* * Disable IRQ and possible debouncing timer. */ - disable_irq(gpio_to_irq(bdata->button->gpio)); + disable_irq(bdata->irq); if (bdata->timer_debounce) del_timer_sync(&bdata->timer); @@ -135,7 +139,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata) static void gpio_keys_enable_button(struct gpio_button_data *bdata) { if (bdata->disabled) { - enable_irq(gpio_to_irq(bdata->button->gpio)); + enable_irq(bdata->irq); bdata->disabled = false; } } @@ -195,7 +199,7 @@ static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata, * @type: button type (%EV_KEY, %EV_SW) * * This function parses stringified bitmap from @buf and disables/enables - * GPIO buttons accordinly. Returns 0 on success and negative error + * GPIO buttons accordingly. Returns 0 on success and negative error * on failure. */ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, @@ -320,9 +324,9 @@ static struct attribute_group gpio_keys_attr_group = { .attrs = gpio_keys_attrs, }; -static void gpio_keys_report_event(struct gpio_button_data *bdata) +static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata) { - struct gpio_keys_button *button = bdata->button; + const struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; int state = (gpio_get_value_cansleep(button->gpio) ? 1 : 0) ^ button->active_low; @@ -336,27 +340,26 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata) input_sync(input); } -static void gpio_keys_work_func(struct work_struct *work) +static void gpio_keys_gpio_work_func(struct work_struct *work) { struct gpio_button_data *bdata = container_of(work, struct gpio_button_data, work); - gpio_keys_report_event(bdata); + gpio_keys_gpio_report_event(bdata); } -static void gpio_keys_timer(unsigned long _data) +static void gpio_keys_gpio_timer(unsigned long _data) { - struct gpio_button_data *data = (struct gpio_button_data *)_data; + struct gpio_button_data *bdata = (struct gpio_button_data *)_data; - schedule_work(&data->work); + schedule_work(&bdata->work); } -static irqreturn_t gpio_keys_isr(int irq, void *dev_id) +static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; - struct gpio_keys_button *button = bdata->button; - BUG_ON(irq != gpio_to_irq(button->gpio)); + BUG_ON(irq != bdata->irq); if (bdata->timer_debounce) mod_timer(&bdata->timer, @@ -367,50 +370,133 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id) return IRQ_HANDLED; } +static void gpio_keys_irq_timer(unsigned long _data) +{ + struct gpio_button_data *bdata = (struct gpio_button_data *)_data; + struct input_dev *input = bdata->input; + unsigned long flags; + + spin_lock_irqsave(&bdata->lock, flags); + if (bdata->key_pressed) { + input_event(input, EV_KEY, bdata->button->code, 0); + input_sync(input); + bdata->key_pressed = false; + } + spin_unlock_irqrestore(&bdata->lock, flags); +} + +static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) +{ + struct gpio_button_data *bdata = dev_id; + const struct gpio_keys_button *button = bdata->button; + struct input_dev *input = bdata->input; + unsigned long flags; + + BUG_ON(irq != bdata->irq); + + spin_lock_irqsave(&bdata->lock, flags); + + if (!bdata->key_pressed) { + input_event(input, EV_KEY, button->code, 1); + input_sync(input); + + if (!bdata->timer_debounce) { + input_event(input, EV_KEY, button->code, 0); + input_sync(input); + goto out; + } + + bdata->key_pressed = true; + } + + if (bdata->timer_debounce) + mod_timer(&bdata->timer, + jiffies + msecs_to_jiffies(bdata->timer_debounce)); +out: + spin_unlock_irqrestore(&bdata->lock, flags); + return IRQ_HANDLED; +} + static int __devinit gpio_keys_setup_key(struct platform_device *pdev, + struct input_dev *input, struct gpio_button_data *bdata, - struct gpio_keys_button *button) + const struct gpio_keys_button *button) { const char *desc = button->desc ? button->desc : "gpio_keys"; struct device *dev = &pdev->dev; + irq_handler_t isr; unsigned long irqflags; int irq, error; - setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata); - INIT_WORK(&bdata->work, gpio_keys_work_func); + bdata->input = input; + bdata->button = button; + spin_lock_init(&bdata->lock); - error = gpio_request(button->gpio, desc); - if (error < 0) { - dev_err(dev, "failed to request GPIO %d, error %d\n", - button->gpio, error); - goto fail2; - } + if (gpio_is_valid(button->gpio)) { - error = gpio_direction_input(button->gpio); - if (error < 0) { - dev_err(dev, "failed to configure" - " direction for GPIO %d, error %d\n", - button->gpio, error); - goto fail3; - } + error = gpio_request(button->gpio, desc); + if (error < 0) { + dev_err(dev, "Failed to request GPIO %d, error %d\n", + button->gpio, error); + return error; + } - if (button->debounce_interval) { - error = gpio_set_debounce(button->gpio, - button->debounce_interval * 1000); - /* use timer if gpiolib doesn't provide debounce */ - if (error < 0) - bdata->timer_debounce = button->debounce_interval; - } + error = gpio_direction_input(button->gpio); + if (error < 0) { + dev_err(dev, + "Failed to configure direction for GPIO %d, error %d\n", + button->gpio, error); + goto fail; + } - irq = gpio_to_irq(button->gpio); - if (irq < 0) { - error = irq; - dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n", - button->gpio, error); - goto fail3; + if (button->debounce_interval) { + error = gpio_set_debounce(button->gpio, + button->debounce_interval * 1000); + /* use timer if gpiolib doesn't provide debounce */ + if (error < 0) + bdata->timer_debounce = + button->debounce_interval; + } + + irq = gpio_to_irq(button->gpio); + if (irq < 0) { + error = irq; + dev_err(dev, + "Unable to get irq number for GPIO %d, error %d\n", + button->gpio, error); + goto fail; + } + bdata->irq = irq; + + INIT_WORK(&bdata->work, gpio_keys_gpio_work_func); + setup_timer(&bdata->timer, + gpio_keys_gpio_timer, (unsigned long)bdata); + + isr = gpio_keys_gpio_isr; + irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; + + } else { + if (!button->irq) { + dev_err(dev, "No IRQ specified\n"); + return -EINVAL; + } + bdata->irq = button->irq; + + if (button->type && button->type != EV_KEY) { + dev_err(dev, "Only EV_KEY allowed for IRQ buttons.\n"); + return -EINVAL; + } + + bdata->timer_debounce = button->debounce_interval; + setup_timer(&bdata->timer, + gpio_keys_irq_timer, (unsigned long)bdata); + + isr = gpio_keys_irq_isr; + irqflags = 0; } - irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; + input_set_capability(input, button->type ?: EV_KEY, button->code); + /* * If platform has specified that the button can be disabled, * we don't want it to share the interrupt line. @@ -418,18 +504,19 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev, if (!button->can_disable) irqflags |= IRQF_SHARED; - error = request_threaded_irq(irq, NULL, gpio_keys_isr, irqflags, desc, bdata); + error = request_any_context_irq(bdata->irq, isr, irqflags, desc, bdata); if (error < 0) { dev_err(dev, "Unable to claim irq %d; error %d\n", - irq, error); - goto fail3; + bdata->irq, error); + goto fail; } return 0; -fail3: - gpio_free(button->gpio); -fail2: +fail: + if (gpio_is_valid(button->gpio)) + gpio_free(button->gpio); + return error; } @@ -547,9 +634,19 @@ static int gpio_keys_get_devtree_pdata(struct device *dev, #endif +static void gpio_remove_key(struct gpio_button_data *bdata) +{ + free_irq(bdata->irq, bdata); + if (bdata->timer_debounce) + del_timer_sync(&bdata->timer); + cancel_work_sync(&bdata->work); + if (gpio_is_valid(bdata->button->gpio)) + gpio_free(bdata->button->gpio); +} + static int __devinit gpio_keys_probe(struct platform_device *pdev) { - struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + const struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; struct gpio_keys_drvdata *ddata; struct device *dev = &pdev->dev; struct gpio_keys_platform_data alt_pdata; @@ -599,21 +696,15 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) __set_bit(EV_REP, input->evbit); for (i = 0; i < pdata->nbuttons; i++) { - struct gpio_keys_button *button = &pdata->buttons[i]; + const struct gpio_keys_button *button = &pdata->buttons[i]; struct gpio_button_data *bdata = &ddata->data[i]; - unsigned int type = button->type ?: EV_KEY; - - bdata->input = input; - bdata->button = button; - error = gpio_keys_setup_key(pdev, bdata, button); + error = gpio_keys_setup_key(pdev, input, bdata, button); if (error) goto fail2; if (button->wakeup) wakeup = 1; - - input_set_capability(input, type, button->code); } error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group); @@ -630,9 +721,12 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) goto fail3; } - /* get current state of buttons */ - for (i = 0; i < pdata->nbuttons; i++) - gpio_keys_report_event(&ddata->data[i]); + /* get current state of buttons that are connected to GPIOs */ + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_button_data *bdata = &ddata->data[i]; + if (gpio_is_valid(bdata->button->gpio)) + gpio_keys_gpio_report_event(bdata); + } input_sync(input); device_init_wakeup(&pdev->dev, wakeup); @@ -642,13 +736,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) fail3: sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group); fail2: - while (--i >= 0) { - free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); - if (ddata->data[i].timer_debounce) - del_timer_sync(&ddata->data[i].timer); - cancel_work_sync(&ddata->data[i].work); - gpio_free(pdata->buttons[i].gpio); - } + while (--i >= 0) + gpio_remove_key(&ddata->data[i]); platform_set_drvdata(pdev, NULL); fail1: @@ -671,14 +760,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 0); - for (i = 0; i < ddata->n_buttons; i++) { - int irq = gpio_to_irq(ddata->data[i].button->gpio); - free_irq(irq, &ddata->data[i]); - if (ddata->data[i].timer_debounce) - del_timer_sync(&ddata->data[i].timer); - cancel_work_sync(&ddata->data[i].work); - gpio_free(ddata->data[i].button->gpio); - } + for (i = 0; i < ddata->n_buttons; i++) + gpio_remove_key(&ddata->data[i]); input_unregister_device(input); @@ -703,11 +786,9 @@ static int gpio_keys_suspend(struct device *dev) if (device_may_wakeup(dev)) { for (i = 0; i < ddata->n_buttons; i++) { - struct gpio_keys_button *button = ddata->data[i].button; - if (button->wakeup) { - int irq = gpio_to_irq(button->gpio); - enable_irq_wake(irq); - } + struct gpio_button_data *bdata = &ddata->data[i]; + if (bdata->button->wakeup) + enable_irq_wake(bdata->irq); } } @@ -720,14 +801,12 @@ static int gpio_keys_resume(struct device *dev) int i; for (i = 0; i < ddata->n_buttons; i++) { + struct gpio_button_data *bdata = &ddata->data[i]; + if (bdata->button->wakeup && device_may_wakeup(dev)) + disable_irq_wake(bdata->irq); - struct gpio_keys_button *button = ddata->data[i].button; - if (button->wakeup && device_may_wakeup(dev)) { - int irq = gpio_to_irq(button->gpio); - disable_irq_wake(irq); - } - - gpio_keys_report_event(&ddata->data[i]); + if (gpio_is_valid(bdata->button->gpio)) + gpio_keys_gpio_report_event(bdata); } input_sync(ddata->input); diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c index eeafc30..9d639fa 100644 --- a/drivers/input/keyboard/jornada720_kbd.c +++ b/drivers/input/keyboard/jornada720_kbd.c @@ -27,6 +27,7 @@ #include <mach/jornada720.h> #include <mach/hardware.h> +#include <mach/irqs.h> MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>"); MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver"); diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 21c42f8..fe4ac95 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -630,6 +630,7 @@ tegra_kbc_dt_parse_pdata(struct platform_device *pdev) if (!np) return NULL; + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); if (!pdata) return NULL; diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c index f2e0cbc..f9ce183 100644 --- a/drivers/input/misc/88pm860x_onkey.c +++ b/drivers/input/misc/88pm860x_onkey.c @@ -105,6 +105,8 @@ static int __devinit pm860x_onkey_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, info); + device_init_wakeup(&pdev->dev, 1); + return 0; out_irq: @@ -129,10 +131,34 @@ static int __devexit pm860x_onkey_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_onkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_ONKEY; + return 0; +} +static int pm860x_onkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_ONKEY); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_onkey_pm_ops, pm860x_onkey_suspend, pm860x_onkey_resume); + static struct platform_driver pm860x_onkey_driver = { .driver = { .name = "88pm860x-onkey", .owner = THIS_MODULE, + .pm = &pm860x_onkey_pm_ops, }, .probe = pm860x_onkey_probe, .remove = __devexit_p(pm860x_onkey_remove), diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index ff5f61a..5fa9934 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -25,7 +25,6 @@ #include <asm/irq.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <asm/amigahw.h> #include <asm/amigaints.h> diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c index 5c4a692..d1c4323 100644 --- a/drivers/input/mouse/atarimouse.c +++ b/drivers/input/mouse/atarimouse.c @@ -47,7 +47,6 @@ #include <asm/irq.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <asm/atarihw.h> #include <asm/atarikb.h> diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 2a77a52..a977bfa 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/ctype.h> #include <linux/libps2.h> #include <linux/serio.h> @@ -36,6 +37,9 @@ #define FSP_CMD_TIMEOUT 200 #define FSP_CMD_TIMEOUT2 30 +#define GET_ABS_X(packet) ((packet[1] << 2) | ((packet[3] >> 2) & 0x03)) +#define GET_ABS_Y(packet) ((packet[2] << 2) | (packet[3] & 0x03)) + /** Driver version. */ static const char fsp_drv_ver[] = "1.0.0-K"; @@ -128,8 +132,9 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) out: ps2_end_command(ps2dev); psmouse_activate(psmouse); - dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n", - reg_addr, *reg_val, rc); + psmouse_dbg(psmouse, + "READ REG: 0x%02x is 0x%02x (rc = %d)\n", + reg_addr, *reg_val, rc); return rc; } @@ -179,8 +184,9 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val) out: ps2_end_command(ps2dev); - dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n", - reg_addr, reg_val, rc); + psmouse_dbg(psmouse, + "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n", + reg_addr, reg_val, rc); return rc; } @@ -237,8 +243,9 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) out: ps2_end_command(ps2dev); psmouse_activate(psmouse); - dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n", - *reg_val, rc); + psmouse_dbg(psmouse, + "READ PAGE REG: 0x%02x (rc = %d)\n", + *reg_val, rc); return rc; } @@ -274,8 +281,9 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val) out: ps2_end_command(ps2dev); - dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n", - reg_val, rc); + psmouse_dbg(psmouse, + "WRITE PAGE REG: to 0x%02x (rc = %d)\n", + reg_val, rc); return rc; } @@ -319,7 +327,7 @@ static int fsp_opc_tag_enable(struct psmouse *psmouse, bool enable) int res = 0; if (fsp_reg_read(psmouse, FSP_REG_OPC_QDOWN, &v) == -1) { - dev_err(&psmouse->ps2dev.serio->dev, "Unable get OPC state.\n"); + psmouse_err(psmouse, "Unable get OPC state.\n"); return -EIO; } @@ -336,8 +344,7 @@ static int fsp_opc_tag_enable(struct psmouse *psmouse, bool enable) } if (res != 0) { - dev_err(&psmouse->ps2dev.serio->dev, - "Unable to enable OPC tag.\n"); + psmouse_err(psmouse, "Unable to enable OPC tag.\n"); res = -EIO; } @@ -615,18 +622,40 @@ static struct attribute_group fsp_attribute_group = { .attrs = fsp_attributes, }; -#ifdef FSP_DEBUG -static void fsp_packet_debug(unsigned char packet[]) +#ifdef FSP_DEBUG +static void fsp_packet_debug(struct psmouse *psmouse, unsigned char packet[]) { static unsigned int ps2_packet_cnt; static unsigned int ps2_last_second; unsigned int jiffies_msec; + const char *packet_type = "UNKNOWN"; + unsigned short abs_x = 0, abs_y = 0; + + /* Interpret & dump the packet data. */ + switch (packet[0] >> FSP_PKT_TYPE_SHIFT) { + case FSP_PKT_TYPE_ABS: + packet_type = "Absolute"; + abs_x = GET_ABS_X(packet); + abs_y = GET_ABS_Y(packet); + break; + case FSP_PKT_TYPE_NORMAL: + packet_type = "Normal"; + break; + case FSP_PKT_TYPE_NOTIFY: + packet_type = "Notify"; + break; + case FSP_PKT_TYPE_NORMAL_OPC: + packet_type = "Normal-OPC"; + break; + } ps2_packet_cnt++; jiffies_msec = jiffies_to_msecs(jiffies); psmouse_dbg(psmouse, - "%08dms PS/2 packets: %02x, %02x, %02x, %02x\n", - jiffies_msec, packet[0], packet[1], packet[2], packet[3]); + "%08dms %s packets: %02x, %02x, %02x, %02x; " + "abs_x: %d, abs_y: %d\n", + jiffies_msec, packet_type, + packet[0], packet[1], packet[2], packet[3], abs_x, abs_y); if (jiffies_msec - ps2_last_second > 1000) { psmouse_dbg(psmouse, "PS/2 packets/sec = %d\n", ps2_packet_cnt); @@ -635,17 +664,29 @@ static void fsp_packet_debug(unsigned char packet[]) } } #else -static void fsp_packet_debug(unsigned char packet[]) +static void fsp_packet_debug(struct psmouse *psmouse, unsigned char packet[]) { } #endif +static void fsp_set_slot(struct input_dev *dev, int slot, bool active, + unsigned int x, unsigned int y) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); + if (active) { + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + } +} + static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; struct fsp_data *ad = psmouse->private; unsigned char *packet = psmouse->packet; unsigned char button_status = 0, lscroll = 0, rscroll = 0; + unsigned short abs_x, abs_y, fgrs = 0; int rel_x, rel_y; if (psmouse->pktcnt < 4) @@ -655,16 +696,76 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) * Full packet accumulated, process it */ + fsp_packet_debug(psmouse, packet); + switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) { case FSP_PKT_TYPE_ABS: - dev_warn(&psmouse->ps2dev.serio->dev, - "Unexpected absolute mode packet, ignored.\n"); + abs_x = GET_ABS_X(packet); + abs_y = GET_ABS_Y(packet); + + if (packet[0] & FSP_PB0_MFMC) { + /* + * MFMC packet: assume that there are two fingers on + * pad + */ + fgrs = 2; + + /* MFMC packet */ + if (packet[0] & FSP_PB0_MFMC_FGR2) { + /* 2nd finger */ + if (ad->last_mt_fgr == 2) { + /* + * workaround for buggy firmware + * which doesn't clear MFMC bit if + * the 1st finger is up + */ + fgrs = 1; + fsp_set_slot(dev, 0, false, 0, 0); + } + ad->last_mt_fgr = 2; + + fsp_set_slot(dev, 1, fgrs == 2, abs_x, abs_y); + } else { + /* 1st finger */ + if (ad->last_mt_fgr == 1) { + /* + * workaround for buggy firmware + * which doesn't clear MFMC bit if + * the 2nd finger is up + */ + fgrs = 1; + fsp_set_slot(dev, 1, false, 0, 0); + } + ad->last_mt_fgr = 1; + fsp_set_slot(dev, 0, fgrs != 0, abs_x, abs_y); + } + } else { + /* SFAC packet */ + + /* no multi-finger information */ + ad->last_mt_fgr = 0; + + if (abs_x != 0 && abs_y != 0) + fgrs = 1; + + fsp_set_slot(dev, 0, fgrs > 0, abs_x, abs_y); + fsp_set_slot(dev, 1, false, 0, 0); + } + if (fgrs > 0) { + input_report_abs(dev, ABS_X, abs_x); + input_report_abs(dev, ABS_Y, abs_y); + } + input_report_key(dev, BTN_LEFT, packet[0] & 0x01); + input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); + input_report_key(dev, BTN_TOUCH, fgrs); + input_report_key(dev, BTN_TOOL_FINGER, fgrs == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fgrs == 2); break; case FSP_PKT_TYPE_NORMAL_OPC: /* on-pad click, filter it if necessary */ if ((ad->flags & FSPDRV_FLAG_EN_OPC) != FSPDRV_FLAG_EN_OPC) - packet[0] &= ~BIT(0); + packet[0] &= ~FSP_PB0_LBTN; /* fall through */ case FSP_PKT_TYPE_NORMAL: @@ -711,8 +812,6 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) input_sync(dev); - fsp_packet_debug(packet); - return PSMOUSE_FULL_PACKET; } @@ -736,42 +835,106 @@ static int fsp_activate_protocol(struct psmouse *psmouse) ps2_command(ps2dev, param, PSMOUSE_CMD_GETID); if (param[0] != 0x04) { - dev_err(&psmouse->ps2dev.serio->dev, - "Unable to enable 4 bytes packet format.\n"); + psmouse_err(psmouse, + "Unable to enable 4 bytes packet format.\n"); return -EIO; } - if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &val)) { - dev_err(&psmouse->ps2dev.serio->dev, - "Unable to read SYSCTL5 register.\n"); - return -EIO; - } + if (pad->ver < FSP_VER_STL3888_C0) { + /* Preparing relative coordinates output for older hardware */ + if (fsp_reg_read(psmouse, FSP_REG_SYSCTL5, &val)) { + psmouse_err(psmouse, + "Unable to read SYSCTL5 register.\n"); + return -EIO; + } - val &= ~(FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8 | FSP_BIT_EN_AUTO_MSID8); - /* Ensure we are not in absolute mode */ - val &= ~FSP_BIT_EN_PKT_G0; - if (pad->buttons == 0x06) { - /* Left/Middle/Right & Scroll Up/Down/Right/Left */ - val |= FSP_BIT_EN_MSID6; - } + if (fsp_get_buttons(psmouse, &pad->buttons)) { + psmouse_err(psmouse, + "Unable to retrieve number of buttons.\n"); + return -EIO; + } - if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, val)) { - dev_err(&psmouse->ps2dev.serio->dev, - "Unable to set up required mode bits.\n"); - return -EIO; + val &= ~(FSP_BIT_EN_MSID7 | FSP_BIT_EN_MSID8 | FSP_BIT_EN_AUTO_MSID8); + /* Ensure we are not in absolute mode */ + val &= ~FSP_BIT_EN_PKT_G0; + if (pad->buttons == 0x06) { + /* Left/Middle/Right & Scroll Up/Down/Right/Left */ + val |= FSP_BIT_EN_MSID6; + } + + if (fsp_reg_write(psmouse, FSP_REG_SYSCTL5, val)) { + psmouse_err(psmouse, + "Unable to set up required mode bits.\n"); + return -EIO; + } + + /* + * Enable OPC tags such that driver can tell the difference + * between on-pad and real button click + */ + if (fsp_opc_tag_enable(psmouse, true)) + psmouse_warn(psmouse, + "Failed to enable OPC tag mode.\n"); + /* enable on-pad click by default */ + pad->flags |= FSPDRV_FLAG_EN_OPC; + + /* Enable on-pad vertical and horizontal scrolling */ + fsp_onpad_vscr(psmouse, true); + fsp_onpad_hscr(psmouse, true); + } else { + /* Enable absolute coordinates output for Cx/Dx hardware */ + if (fsp_reg_write(psmouse, FSP_REG_SWC1, + FSP_BIT_SWC1_EN_ABS_1F | + FSP_BIT_SWC1_EN_ABS_2F | + FSP_BIT_SWC1_EN_FUP_OUT | + FSP_BIT_SWC1_EN_ABS_CON)) { + psmouse_err(psmouse, + "Unable to enable absolute coordinates output.\n"); + return -EIO; + } } - /* - * Enable OPC tags such that driver can tell the difference between - * on-pad and real button click - */ - if (fsp_opc_tag_enable(psmouse, true)) - dev_warn(&psmouse->ps2dev.serio->dev, - "Failed to enable OPC tag mode.\n"); + return 0; +} - /* Enable on-pad vertical and horizontal scrolling */ - fsp_onpad_vscr(psmouse, true); - fsp_onpad_hscr(psmouse, true); +static int fsp_set_input_params(struct psmouse *psmouse) +{ + struct input_dev *dev = psmouse->dev; + struct fsp_data *pad = psmouse->private; + + if (pad->ver < FSP_VER_STL3888_C0) { + __set_bit(BTN_MIDDLE, dev->keybit); + __set_bit(BTN_BACK, dev->keybit); + __set_bit(BTN_FORWARD, dev->keybit); + __set_bit(REL_WHEEL, dev->relbit); + __set_bit(REL_HWHEEL, dev->relbit); + } else { + /* + * Hardware prior to Cx performs much better in relative mode; + * hence, only enable absolute coordinates output as well as + * multi-touch output for the newer hardware. + * + * Maximum coordinates can be computed as: + * + * number of scanlines * 64 - 57 + * + * where number of X/Y scanline lines are 16/12. + */ + int abs_x = 967, abs_y = 711; + + __set_bit(EV_ABS, dev->evbit); + __clear_bit(EV_REL, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_FINGER, dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); + + input_set_abs_params(dev, ABS_X, 0, abs_x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, abs_y, 0, 0); + input_mt_init_slots(dev, 2); + input_set_abs_params(dev, ABS_MT_POSITION_X, 0, abs_x, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, abs_y, 0, 0); + } return 0; } @@ -829,18 +992,16 @@ static int fsp_reconnect(struct psmouse *psmouse) int fsp_init(struct psmouse *psmouse) { struct fsp_data *priv; - int ver, rev, buttons; + int ver, rev; int error; if (fsp_get_version(psmouse, &ver) || - fsp_get_revision(psmouse, &rev) || - fsp_get_buttons(psmouse, &buttons)) { + fsp_get_revision(psmouse, &rev)) { return -ENODEV; } - psmouse_info(psmouse, - "Finger Sensing Pad, hw: %d.%d.%d, sw: %s, buttons: %d\n", - ver >> 4, ver & 0x0F, rev, fsp_drv_ver, buttons & 7); + psmouse_info(psmouse, "Finger Sensing Pad, hw: %d.%d.%d, sw: %s\n", + ver >> 4, ver & 0x0F, rev, fsp_drv_ver); psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL); if (!priv) @@ -848,17 +1009,6 @@ int fsp_init(struct psmouse *psmouse) priv->ver = ver; priv->rev = rev; - priv->buttons = buttons; - - /* enable on-pad click by default */ - priv->flags |= FSPDRV_FLAG_EN_OPC; - - /* Set up various supported input event bits */ - __set_bit(BTN_MIDDLE, psmouse->dev->keybit); - __set_bit(BTN_BACK, psmouse->dev->keybit); - __set_bit(BTN_FORWARD, psmouse->dev->keybit); - __set_bit(REL_WHEEL, psmouse->dev->relbit); - __set_bit(REL_HWHEEL, psmouse->dev->relbit); psmouse->protocol_handler = fsp_process_byte; psmouse->disconnect = fsp_disconnect; @@ -866,16 +1016,20 @@ int fsp_init(struct psmouse *psmouse) psmouse->cleanup = fsp_reset; psmouse->pktsize = 4; - /* set default packet output based on number of buttons we found */ error = fsp_activate_protocol(psmouse); if (error) goto err_out; + /* Set up various supported input event bits */ + error = fsp_set_input_params(psmouse); + if (error) + goto err_out; + error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, &fsp_attribute_group); if (error) { - dev_err(&psmouse->ps2dev.serio->dev, - "Failed to create sysfs attributes (%d)", error); + psmouse_err(psmouse, + "Failed to create sysfs attributes (%d)", error); goto err_out; } diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h index 2e4af24..334de19 100644 --- a/drivers/input/mouse/sentelic.h +++ b/drivers/input/mouse/sentelic.h @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -55,6 +55,16 @@ #define FSP_BIT_FIX_HSCR BIT(5) #define FSP_BIT_DRAG_LOCK BIT(6) +#define FSP_REG_SWC1 (0x90) +#define FSP_BIT_SWC1_EN_ABS_1F BIT(0) +#define FSP_BIT_SWC1_EN_GID BIT(1) +#define FSP_BIT_SWC1_EN_ABS_2F BIT(2) +#define FSP_BIT_SWC1_EN_FUP_OUT BIT(3) +#define FSP_BIT_SWC1_EN_ABS_CON BIT(4) +#define FSP_BIT_SWC1_GST_GRP0 BIT(5) +#define FSP_BIT_SWC1_GST_GRP1 BIT(6) +#define FSP_BIT_SWC1_BX_COMPAT BIT(7) + /* Finger-sensing Pad packet formating related definitions */ /* absolute packet type */ @@ -64,12 +74,32 @@ #define FSP_PKT_TYPE_NORMAL_OPC (0x03) #define FSP_PKT_TYPE_SHIFT (6) +/* bit definitions for the first byte of report packet */ +#define FSP_PB0_LBTN BIT(0) +#define FSP_PB0_RBTN BIT(1) +#define FSP_PB0_MBTN BIT(2) +#define FSP_PB0_MFMC_FGR2 FSP_PB0_MBTN +#define FSP_PB0_MUST_SET BIT(3) +#define FSP_PB0_PHY_BTN BIT(4) +#define FSP_PB0_MFMC BIT(5) + +/* hardware revisions */ +#define FSP_VER_STL3888_A4 (0xC1) +#define FSP_VER_STL3888_B0 (0xD0) +#define FSP_VER_STL3888_B1 (0xD1) +#define FSP_VER_STL3888_B2 (0xD2) +#define FSP_VER_STL3888_C0 (0xE0) +#define FSP_VER_STL3888_C1 (0xE1) +#define FSP_VER_STL3888_D0 (0xE2) +#define FSP_VER_STL3888_D1 (0xE3) +#define FSP_VER_STL3888_E0 (0xE4) + #ifdef __KERNEL__ struct fsp_data { unsigned char ver; /* hardware version */ unsigned char rev; /* hardware revison */ - unsigned char buttons; /* Number of buttons */ + unsigned int buttons; /* Number of buttons */ unsigned int flags; #define FSPDRV_FLAG_EN_OPC (0x001) /* enable on-pad clicking */ @@ -78,6 +108,7 @@ struct fsp_data { unsigned char last_reg; /* Last register we requested read from */ unsigned char last_val; + unsigned int last_mt_fgr; /* Last seen finger(multitouch) */ }; #ifdef CONFIG_MOUSE_PS2_SENTELIC diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index bd5b10e..f5fbdf9 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -184,7 +184,7 @@ module_init(ams_delta_serio_init); static void __exit ams_delta_serio_exit(void) { serio_unregister_port(ams_delta_serio); - free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0); + free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0); gpio_free_array(ams_delta_gpios, ARRAY_SIZE(ams_delta_gpios)); } diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index be33160..09a0899 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -71,7 +71,6 @@ #include <linux/slab.h> #include <linux/hil.h> #include <asm/io.h> -#include <asm/system.h> /* Machine-specific abstraction */ diff --git a/drivers/input/serio/maceps2.c b/drivers/input/serio/maceps2.c index 558200e..61da763 100644 --- a/drivers/input/serio/maceps2.c +++ b/drivers/input/serio/maceps2.c @@ -21,7 +21,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/ip32/mace.h> #include <asm/ip32/ip32_ints.h> diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c index 8b44ddc..2af5df6 100644 --- a/drivers/input/serio/rpckbd.c +++ b/drivers/input/serio/rpckbd.c @@ -36,16 +36,19 @@ #include <linux/io.h> #include <linux/slab.h> -#include <asm/irq.h> #include <mach/hardware.h> #include <asm/hardware/iomd.h> -#include <asm/system.h> MODULE_AUTHOR("Vojtech Pavlik, Russell King"); MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:kart"); +struct rpckbd_data { + int tx_irq; + int rx_irq; +}; + static int rpckbd_write(struct serio *port, unsigned char val) { while (!(iomd_readb(IOMD_KCTRL) & (1 << 7))) @@ -78,19 +81,21 @@ static irqreturn_t rpckbd_tx(int irq, void *dev_id) static int rpckbd_open(struct serio *port) { + struct rpckbd_data *rpckbd = port->port_data; + /* Reset the keyboard state machine. */ iomd_writeb(0, IOMD_KCTRL); iomd_writeb(8, IOMD_KCTRL); iomd_readb(IOMD_KARTRX); - if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", port) != 0) { + if (request_irq(rpckbd->rx_irq, rpckbd_rx, 0, "rpckbd", port) != 0) { printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n"); return -EBUSY; } - if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) { + if (request_irq(rpckbd->tx_irq, rpckbd_tx, 0, "rpckbd", port) != 0) { printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n"); - free_irq(IRQ_KEYBOARDRX, port); + free_irq(rpckbd->rx_irq, port); return -EBUSY; } @@ -99,8 +104,10 @@ static int rpckbd_open(struct serio *port) static void rpckbd_close(struct serio *port) { - free_irq(IRQ_KEYBOARDRX, port); - free_irq(IRQ_KEYBOARDTX, port); + struct rpckbd_data *rpckbd = port->port_data; + + free_irq(rpckbd->rx_irq, port); + free_irq(rpckbd->tx_irq, port); } /* @@ -109,17 +116,35 @@ static void rpckbd_close(struct serio *port) */ static int __devinit rpckbd_probe(struct platform_device *dev) { + struct rpckbd_data *rpckbd; struct serio *serio; + int tx_irq, rx_irq; + + rx_irq = platform_get_irq(dev, 0); + if (rx_irq <= 0) + return rx_irq < 0 ? rx_irq : -ENXIO; + + tx_irq = platform_get_irq(dev, 1); + if (tx_irq <= 0) + return tx_irq < 0 ? tx_irq : -ENXIO; serio = kzalloc(sizeof(struct serio), GFP_KERNEL); - if (!serio) + rpckbd = kzalloc(sizeof(*rpckbd), GFP_KERNEL); + if (!serio || !rpckbd) { + kfree(rpckbd); + kfree(serio); return -ENOMEM; + } + + rpckbd->rx_irq = rx_irq; + rpckbd->tx_irq = tx_irq; serio->id.type = SERIO_8042; serio->write = rpckbd_write; serio->open = rpckbd_open; serio->close = rpckbd_close; serio->dev.parent = &dev->dev; + serio->port_data = rpckbd; strlcpy(serio->name, "RiscPC PS/2 kbd port", sizeof(serio->name)); strlcpy(serio->phys, "rpckbd/serio0", sizeof(serio->phys)); @@ -131,7 +156,11 @@ static int __devinit rpckbd_probe(struct platform_device *dev) static int __devexit rpckbd_remove(struct platform_device *dev) { struct serio *serio = platform_get_drvdata(dev); + struct rpckbd_data *rpckbd = serio->port_data; + serio_unregister_port(serio); + kfree(rpckbd); + return 0; } diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 44fc8b4..3897667 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -20,10 +20,29 @@ #include <linux/spinlock.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/hardware/sa1111.h> +#define PS2CR 0x0000 +#define PS2STAT 0x0004 +#define PS2DATA 0x0008 +#define PS2CLKDIV 0x000c +#define PS2PRECNT 0x0010 + +#define PS2CR_ENA 0x08 +#define PS2CR_FKD 0x02 +#define PS2CR_FKC 0x01 + +#define PS2STAT_STP 0x0100 +#define PS2STAT_TXE 0x0080 +#define PS2STAT_TXB 0x0040 +#define PS2STAT_RXF 0x0020 +#define PS2STAT_RXB 0x0010 +#define PS2STAT_ENA 0x0008 +#define PS2STAT_RXP 0x0004 +#define PS2STAT_KBD 0x0002 +#define PS2STAT_KBC 0x0001 + struct ps2if { struct serio *io; struct sa1111_dev *dev; @@ -45,22 +64,22 @@ static irqreturn_t ps2_rxint(int irq, void *dev_id) struct ps2if *ps2if = dev_id; unsigned int scancode, flag, status; - status = sa1111_readl(ps2if->base + SA1111_PS2STAT); + status = sa1111_readl(ps2if->base + PS2STAT); while (status & PS2STAT_RXF) { if (status & PS2STAT_STP) - sa1111_writel(PS2STAT_STP, ps2if->base + SA1111_PS2STAT); + sa1111_writel(PS2STAT_STP, ps2if->base + PS2STAT); flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) | (status & PS2STAT_RXP ? 0 : SERIO_PARITY); - scancode = sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff; + scancode = sa1111_readl(ps2if->base + PS2DATA) & 0xff; if (hweight8(scancode) & 1) flag ^= SERIO_PARITY; serio_interrupt(ps2if->io, scancode, flag); - status = sa1111_readl(ps2if->base + SA1111_PS2STAT); + status = sa1111_readl(ps2if->base + PS2STAT); } return IRQ_HANDLED; @@ -75,12 +94,12 @@ static irqreturn_t ps2_txint(int irq, void *dev_id) unsigned int status; spin_lock(&ps2if->lock); - status = sa1111_readl(ps2if->base + SA1111_PS2STAT); + status = sa1111_readl(ps2if->base + PS2STAT); if (ps2if->head == ps2if->tail) { disable_irq_nosync(irq); /* done */ } else if (status & PS2STAT_TXE) { - sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA); + sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA); ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1); } spin_unlock(&ps2if->lock); @@ -103,8 +122,8 @@ static int ps2_write(struct serio *io, unsigned char val) /* * If the TX register is empty, we can go straight out. */ - if (sa1111_readl(ps2if->base + SA1111_PS2STAT) & PS2STAT_TXE) { - sa1111_writel(val, ps2if->base + SA1111_PS2DATA); + if (sa1111_readl(ps2if->base + PS2STAT) & PS2STAT_TXE) { + sa1111_writel(val, ps2if->base + PS2DATA); } else { if (ps2if->head == ps2if->tail) enable_irq(ps2if->dev->irq[1]); @@ -124,13 +143,16 @@ static int ps2_open(struct serio *io) struct ps2if *ps2if = io->port_data; int ret; - sa1111_enable_device(ps2if->dev); + ret = sa1111_enable_device(ps2if->dev); + if (ret) + return ret; ret = request_irq(ps2if->dev->irq[0], ps2_rxint, 0, SA1111_DRIVER_NAME(ps2if->dev), ps2if); if (ret) { printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", ps2if->dev->irq[0], ret); + sa1111_disable_device(ps2if->dev); return ret; } @@ -140,6 +162,7 @@ static int ps2_open(struct serio *io) printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", ps2if->dev->irq[1], ret); free_irq(ps2if->dev->irq[0], ps2if); + sa1111_disable_device(ps2if->dev); return ret; } @@ -147,7 +170,7 @@ static int ps2_open(struct serio *io) enable_irq_wake(ps2if->dev->irq[0]); - sa1111_writel(PS2CR_ENA, ps2if->base + SA1111_PS2CR); + sa1111_writel(PS2CR_ENA, ps2if->base + PS2CR); return 0; } @@ -155,7 +178,7 @@ static void ps2_close(struct serio *io) { struct ps2if *ps2if = io->port_data; - sa1111_writel(0, ps2if->base + SA1111_PS2CR); + sa1111_writel(0, ps2if->base + PS2CR); disable_irq_wake(ps2if->dev->irq[0]); @@ -175,7 +198,7 @@ static void __devinit ps2_clear_input(struct ps2if *ps2if) int maxread = 100; while (maxread--) { - if ((sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff) == 0xff) + if ((sa1111_readl(ps2if->base + PS2DATA) & 0xff) == 0xff) break; } } @@ -185,11 +208,11 @@ static unsigned int __devinit ps2_test_one(struct ps2if *ps2if, { unsigned int val; - sa1111_writel(PS2CR_ENA | mask, ps2if->base + SA1111_PS2CR); + sa1111_writel(PS2CR_ENA | mask, ps2if->base + PS2CR); udelay(2); - val = sa1111_readl(ps2if->base + SA1111_PS2STAT); + val = sa1111_readl(ps2if->base + PS2STAT); return val & (PS2STAT_KBC | PS2STAT_KBD); } @@ -220,7 +243,7 @@ static int __devinit ps2_test(struct ps2if *ps2if) ret = -ENODEV; } - sa1111_writel(0, ps2if->base + SA1111_PS2CR); + sa1111_writel(0, ps2if->base + PS2CR); return ret; } @@ -274,8 +297,8 @@ static int __devinit ps2_probe(struct sa1111_dev *dev) sa1111_enable_device(ps2if->dev); /* Incoming clock is 8MHz */ - sa1111_writel(0, ps2if->base + SA1111_PS2CLKDIV); - sa1111_writel(127, ps2if->base + SA1111_PS2PRECNT); + sa1111_writel(0, ps2if->base + PS2CLKDIV); + sa1111_writel(127, ps2if->base + PS2PRECNT); /* * Flush any pending input. @@ -330,6 +353,7 @@ static int __devexit ps2_remove(struct sa1111_dev *dev) static struct sa1111_driver ps2_driver = { .drv = { .name = "sa1111-ps2", + .owner = THIS_MODULE, }, .devid = SA1111_DEVID_PS2, .probe = ps2_probe, diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index e53f408..bed7cbf 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -76,6 +76,7 @@ config TABLET_USB_KBTAB config TABLET_USB_WACOM tristate "Wacom Intuos/Graphire tablet support (USB)" depends on USB_ARCH_HAS_HCD + select POWER_SUPPLY select USB select NEW_LEDS select LEDS_CLASS diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 0783864..b4842d0 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -88,6 +88,7 @@ #include <linux/mod_devicetable.h> #include <linux/init.h> #include <linux/usb/input.h> +#include <linux/power_supply.h> #include <asm/unaligned.h> /* @@ -112,6 +113,7 @@ struct wacom { struct urb *irq; struct wacom_wac wacom_wac; struct mutex lock; + struct work_struct work; bool open; char phys[32]; struct wacom_led { @@ -120,8 +122,15 @@ struct wacom { u8 hlv; /* status led brightness button pressed (1..127) */ u8 img_lum; /* OLED matrix display brightness */ } led; + struct power_supply battery; }; +static inline void wacom_schedule_work(struct wacom_wac *wacom_wac) +{ + struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac); + schedule_work(&wacom->work); +} + extern const struct usb_device_id wacom_ids[]; void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index ca28066..0d26921 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -167,6 +167,19 @@ static void wacom_close(struct input_dev *dev) usb_autopm_put_interface(wacom->intf); } +/* + * Static values for max X/Y and resolution of Pen interface is stored in + * features. This mean physical size of active area can be computed. + * This is useful to do when Pen and Touch have same active area of tablet. + * This means for Touch device, we only need to find max X/Y value and we + * have enough information to compute resolution of touch. + */ +static void wacom_set_phy_from_res(struct wacom_features *features) +{ + features->x_phy = (features->x_max * 100) / features->x_resolution; + features->y_phy = (features->y_max * 100) / features->y_resolution; +} + static int wacom_parse_logical_collection(unsigned char *report, struct wacom_features *features) { @@ -178,15 +191,7 @@ static int wacom_parse_logical_collection(unsigned char *report, features->pktlen = WACOM_PKGLEN_BBTOUCH3; features->device_type = BTN_TOOL_FINGER; - /* - * Stylus and Touch have same active area - * so compute physical size based on stylus - * data before its overwritten. - */ - features->x_phy = - (features->x_max * 100) / features->x_resolution; - features->y_phy = - (features->y_max * 100) / features->y_resolution; + wacom_set_phy_from_res(features); features->x_max = features->y_max = get_unaligned_le16(&report[10]); @@ -422,6 +427,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat report_id, rep_data, 4, 1); } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES); } else if (features->type != TABLETPC && + features->type != WIRELESS && features->device_type == BTN_TOOL_PEN) { do { rep_data[0] = 2; @@ -454,6 +460,21 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, features->pressure_fuzz = 0; features->distance_fuzz = 0; + /* + * The wireless device HID is basic and layout conflicts with + * other tablets (monitor and touch interface can look like pen). + * Skip the query for this type and modify defaults based on + * interface number. + */ + if (features->type == WIRELESS) { + if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { + features->device_type = 0; + } else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) { + features->device_type = BTN_TOOL_DOUBLETAP; + features->pktlen = WACOM_PKGLEN_BBTOUCH3; + } + } + /* only Tablet PCs and Bamboo P&T need to retrieve the info */ if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) && (features->type != BAMBOO_PT)) @@ -822,6 +843,152 @@ static void wacom_destroy_leds(struct wacom *wacom) } } +static enum power_supply_property wacom_battery_props[] = { + POWER_SUPPLY_PROP_CAPACITY +}; + +static int wacom_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wacom *wacom = container_of(psy, struct wacom, battery); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = + wacom->wacom_wac.battery_capacity * 100 / 31; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int wacom_initialize_battery(struct wacom *wacom) +{ + int error = 0; + + if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR) { + wacom->battery.properties = wacom_battery_props; + wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props); + wacom->battery.get_property = wacom_battery_get_property; + wacom->battery.name = "wacom_battery"; + wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY; + wacom->battery.use_for_apm = 0; + + error = power_supply_register(&wacom->usbdev->dev, + &wacom->battery); + } + + return error; +} + +static void wacom_destroy_battery(struct wacom *wacom) +{ + if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR) + power_supply_unregister(&wacom->battery); +} + +static int wacom_register_input(struct wacom *wacom) +{ + struct input_dev *input_dev; + struct usb_interface *intf = wacom->intf; + struct usb_device *dev = interface_to_usbdev(intf); + struct wacom_wac *wacom_wac = &(wacom->wacom_wac); + int error; + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->name = wacom_wac->name; + input_dev->dev.parent = &intf->dev; + input_dev->open = wacom_open; + input_dev->close = wacom_close; + usb_to_input_id(dev, &input_dev->id); + input_set_drvdata(input_dev, wacom); + + wacom_wac->input = input_dev; + wacom_setup_input_capabilities(input_dev, wacom_wac); + + error = input_register_device(input_dev); + if (error) { + input_free_device(input_dev); + wacom_wac->input = NULL; + } + + return error; +} + +static void wacom_wireless_work(struct work_struct *work) +{ + struct wacom *wacom = container_of(work, struct wacom, work); + struct usb_device *usbdev = wacom->usbdev; + struct wacom_wac *wacom_wac = &wacom->wacom_wac; + + /* + * Regardless if this is a disconnect or a new tablet, + * remove any existing input devices. + */ + + /* Stylus interface */ + wacom = usb_get_intfdata(usbdev->config->interface[1]); + if (wacom->wacom_wac.input) + input_unregister_device(wacom->wacom_wac.input); + wacom->wacom_wac.input = 0; + + /* Touch interface */ + wacom = usb_get_intfdata(usbdev->config->interface[2]); + if (wacom->wacom_wac.input) + input_unregister_device(wacom->wacom_wac.input); + wacom->wacom_wac.input = 0; + + if (wacom_wac->pid == 0) { + printk(KERN_INFO "wacom: wireless tablet disconnected\n"); + } else { + const struct usb_device_id *id = wacom_ids; + + printk(KERN_INFO + "wacom: wireless tablet connected with PID %x\n", + wacom_wac->pid); + + while (id->match_flags) { + if (id->idVendor == USB_VENDOR_ID_WACOM && + id->idProduct == wacom_wac->pid) + break; + id++; + } + + if (!id->match_flags) { + printk(KERN_INFO + "wacom: ignorning unknown PID.\n"); + return; + } + + /* Stylus interface */ + wacom = usb_get_intfdata(usbdev->config->interface[1]); + wacom_wac = &wacom->wacom_wac; + wacom_wac->features = + *((struct wacom_features *)id->driver_info); + wacom_wac->features.device_type = BTN_TOOL_PEN; + wacom_register_input(wacom); + + /* Touch interface */ + wacom = usb_get_intfdata(usbdev->config->interface[2]); + wacom_wac = &wacom->wacom_wac; + wacom_wac->features = + *((struct wacom_features *)id->driver_info); + wacom_wac->features.pktlen = WACOM_PKGLEN_BBTOUCH3; + wacom_wac->features.device_type = BTN_TOOL_FINGER; + wacom_set_phy_from_res(&wacom_wac->features); + wacom_wac->features.x_max = wacom_wac->features.y_max = 4096; + wacom_register_input(wacom); + } +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); @@ -829,18 +996,14 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i struct wacom *wacom; struct wacom_wac *wacom_wac; struct wacom_features *features; - struct input_dev *input_dev; int error; if (!id->driver_info) return -EINVAL; wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!wacom || !input_dev) { - error = -ENOMEM; - goto fail1; - } + if (!wacom) + return -ENOMEM; wacom_wac = &wacom->wacom_wac; wacom_wac->features = *((struct wacom_features *)id->driver_info); @@ -866,11 +1029,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i wacom->usbdev = dev; wacom->intf = intf; mutex_init(&wacom->lock); + INIT_WORK(&wacom->work, wacom_wireless_work); usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); - wacom_wac->input = input_dev; - endpoint = &intf->cur_altsetting->endpoint[0].desc; /* Retrieve the physical and logical size for OEM devices */ @@ -894,15 +1056,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i goto fail3; } - input_dev->name = wacom_wac->name; - input_dev->dev.parent = &intf->dev; - input_dev->open = wacom_open; - input_dev->close = wacom_close; - usb_to_input_id(dev, &input_dev->id); - input_set_drvdata(input_dev, wacom); - - wacom_setup_input_capabilities(input_dev, wacom_wac); - usb_fill_int_urb(wacom->irq, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), wacom_wac->data, features->pktlen, @@ -914,22 +1067,34 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i if (error) goto fail4; - error = input_register_device(input_dev); + error = wacom_initialize_battery(wacom); if (error) goto fail5; + if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) { + error = wacom_register_input(wacom); + if (error) + goto fail6; + } + /* Note that if query fails it is not a hard failure */ wacom_query_tablet_data(intf, features); usb_set_intfdata(intf, wacom); + + if (features->quirks & WACOM_QUIRK_MONITOR) { + if (usb_submit_urb(wacom->irq, GFP_KERNEL)) + goto fail5; + } + return 0; + fail6: wacom_destroy_battery(wacom); fail5: wacom_destroy_leds(wacom); fail4: wacom_remove_shared_data(wacom_wac); fail3: usb_free_urb(wacom->irq); fail2: usb_free_coherent(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma); - fail1: input_free_device(input_dev); - kfree(wacom); + fail1: kfree(wacom); return error; } @@ -940,7 +1105,10 @@ static void wacom_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); usb_kill_urb(wacom->irq); - input_unregister_device(wacom->wacom_wac.input); + cancel_work_sync(&wacom->work); + if (wacom->wacom_wac.input) + input_unregister_device(wacom->wacom_wac.input); + wacom_destroy_battery(wacom); wacom_destroy_leds(wacom); usb_free_urb(wacom->irq); usb_free_coherent(interface_to_usbdev(intf), WACOM_PKGLEN_MAX, @@ -972,7 +1140,8 @@ static int wacom_resume(struct usb_interface *intf) wacom_query_tablet_data(intf, features); wacom_led_control(wacom); - if (wacom->open && usb_submit_urb(wacom->irq, GFP_NOIO) < 0) + if ((wacom->open || features->quirks & WACOM_QUIRK_MONITOR) + && usb_submit_urb(wacom->irq, GFP_NOIO) < 0) rv = -EIO; mutex_unlock(&wacom->lock); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 89a96427..cecd35c 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1044,6 +1044,35 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) return 0; } +static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) +{ + unsigned char *data = wacom->data; + int connected; + + if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80) + return 0; + + connected = data[1] & 0x01; + if (connected) { + int pid, battery; + + pid = get_unaligned_be16(&data[6]); + battery = data[5] & 0x3f; + if (wacom->pid != pid) { + wacom->pid = pid; + wacom_schedule_work(wacom); + } + wacom->battery_capacity = battery; + } else if (wacom->pid != 0) { + /* disconnected while previously connected */ + wacom->pid = 0; + wacom_schedule_work(wacom); + wacom->battery_capacity = 0; + } + + return 0; +} + void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) { bool sync; @@ -1094,6 +1123,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) sync = wacom_bpt_irq(wacom_wac, len); break; + case WIRELESS: + sync = wacom_wireless_irq(wacom_wac, len); + break; + default: sync = false; break; @@ -1155,7 +1188,7 @@ void wacom_setup_device_quirks(struct wacom_features *features) /* these device have multiple inputs */ if (features->type == TABLETPC || features->type == TABLETPC2FG || - features->type == BAMBOO_PT) + features->type == BAMBOO_PT || features->type == WIRELESS) features->quirks |= WACOM_QUIRK_MULTI_INPUT; /* quirk for bamboo touch with 2 low res touches */ @@ -1167,6 +1200,16 @@ void wacom_setup_device_quirks(struct wacom_features *features) features->y_fuzz <<= 5; features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES; } + + if (features->type == WIRELESS) { + + /* monitor never has input and pen/touch have delayed create */ + features->quirks |= WACOM_QUIRK_NO_INPUT; + + /* must be monitor interface if no device_type set */ + if (!features->device_type) + features->quirks |= WACOM_QUIRK_MONITOR; + } } static unsigned int wacom_calculate_touch_res(unsigned int logical_max, @@ -1640,6 +1683,9 @@ static const struct wacom_features wacom_features_0xEC = static const struct wacom_features wacom_features_0x47 = { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x84 = + { "Wacom Wireless Receiver", WACOM_PKGLEN_WIRELESS, 0, 0, 0, + 0, WIRELESS, 0, 0 }; static const struct wacom_features wacom_features_0xD0 = { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1766,6 +1812,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_DETAILED(0xCE, USB_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT, USB_INTERFACE_PROTOCOL_MOUSE) }, + { USB_DEVICE_WACOM(0x84) }, { USB_DEVICE_WACOM(0xD0) }, { USB_DEVICE_WACOM(0xD1) }, { USB_DEVICE_WACOM(0xD2) }, diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 4f0ba21..ba5a334 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -24,6 +24,7 @@ #define WACOM_PKGLEN_BBTOUCH 20 #define WACOM_PKGLEN_BBTOUCH3 64 #define WACOM_PKGLEN_BBPEN 10 +#define WACOM_PKGLEN_WIRELESS 32 /* device IDs */ #define STYLUS_DEVICE_ID 0x02 @@ -45,6 +46,8 @@ /* device quirks */ #define WACOM_QUIRK_MULTI_INPUT 0x0001 #define WACOM_QUIRK_BBTOUCH_LOWRES 0x0002 +#define WACOM_QUIRK_NO_INPUT 0x0004 +#define WACOM_QUIRK_MONITOR 0x0008 enum { PENPARTNER = 0, @@ -54,6 +57,7 @@ enum { PL, DTU, BAMBOO_PT, + WIRELESS, INTUOS, INTUOS3S, INTUOS3, @@ -107,6 +111,8 @@ struct wacom_wac { struct wacom_features features; struct wacom_shared *shared; struct input_dev *input; + int pid; + int battery_capacity; }; #endif diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index c3848ad..d9be6ea 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -22,6 +22,7 @@ #include <mach/hardware.h> #include <mach/jornada720.h> +#include <mach/irqs.h> MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>"); MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver"); diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c index ede0274..48dc5b0 100644 --- a/drivers/input/touchscreen/mc13783_ts.c +++ b/drivers/input/touchscreen/mc13783_ts.c @@ -39,6 +39,7 @@ struct mc13783_ts_priv { struct delayed_work work; struct workqueue_struct *workq; unsigned int sample[4]; + struct mc13xxx_ts_platform_data *touch; }; static irqreturn_t mc13783_ts_handler(int irq, void *data) @@ -125,7 +126,9 @@ static void mc13783_ts_work(struct work_struct *work) unsigned int channel = 12; if (mc13xxx_adc_do_conversion(priv->mc13xxx, - mode, channel, priv->sample) == 0) + mode, channel, + priv->touch->ato, priv->touch->atox, + priv->sample) == 0) mc13783_ts_report_sample(priv); } @@ -179,6 +182,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&priv->work, mc13783_ts_work); priv->mc13xxx = dev_get_drvdata(pdev->dev.parent); priv->idev = idev; + priv->touch = dev_get_platdata(&pdev->dev); + if (!priv->touch) { + dev_err(&pdev->dev, "missing platform data\n"); + ret = -ENODEV; + goto err_free_mem; + } /* * We need separate workqueue because mc13783_adc_do_conversion diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 44b50cc..c21353d 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -18,7 +18,6 @@ #include <linux/serial.h> #include <linux/major.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 33e3c94..c644557 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/string.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index fe254e7..a8c4d3f 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -44,7 +44,6 @@ #include <linux/timer.h> #include <linux/ioport.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 68f5049..f0dfc0c 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -44,7 +44,6 @@ #include <linux/timer.h> #include <linux/ioport.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index bfe9428..4deac45 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -25,7 +25,6 @@ #include <linux/timer.h> #include <linux/ioport.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> diff --git a/drivers/isdn/i4l/isdn_bsdcomp.c b/drivers/isdn/i4l/isdn_bsdcomp.c index 7f3c54d..c59e8d2 100644 --- a/drivers/isdn/i4l/isdn_bsdcomp.c +++ b/drivers/isdn/i4l/isdn_bsdcomp.c @@ -69,7 +69,6 @@ #include <linux/signal.h> /* used in new tty drivers */ #include <linux/bitops.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <asm/types.h> diff --git a/drivers/isdn/pcbit/layer2.c b/drivers/isdn/pcbit/layer2.c index 682911f..a18e639 100644 --- a/drivers/isdn/pcbit/layer2.c +++ b/drivers/isdn/pcbit/layer2.c @@ -36,7 +36,6 @@ #include <linux/isdnif.h> -#include <asm/system.h> #include <asm/io.h> diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c index 4ca0062..5b61aaf 100644 --- a/drivers/leds/leds-88pm860x.c +++ b/drivers/leds/leds-88pm860x.c @@ -114,6 +114,27 @@ static inline int __blink_ctl_mask(int port) return ret; } +static int led_power_set(struct pm860x_chip *chip, int port, int on) +{ + int ret = -EINVAL; + + switch (port) { + case PM8606_LED1_RED: + case PM8606_LED1_GREEN: + case PM8606_LED1_BLUE: + ret = on ? pm8606_osc_enable(chip, RGB1_ENABLE) : + pm8606_osc_disable(chip, RGB1_ENABLE); + break; + case PM8606_LED2_RED: + case PM8606_LED2_GREEN: + case PM8606_LED2_BLUE: + ret = on ? pm8606_osc_enable(chip, RGB2_ENABLE) : + pm8606_osc_disable(chip, RGB2_ENABLE); + break; + } + return ret; +} + static void pm860x_led_work(struct work_struct *work) { @@ -126,6 +147,7 @@ static void pm860x_led_work(struct work_struct *work) chip = led->chip; mutex_lock(&led->lock); if ((led->current_brightness == 0) && led->brightness) { + led_power_set(chip, led->port, 1); if (led->iset) { pm860x_set_bits(led->i2c, __led_off(led->port), LED_CURRENT_MASK, led->iset); @@ -149,6 +171,7 @@ static void pm860x_led_work(struct work_struct *work) LED_CURRENT_MASK, 0); mask = __blink_ctl_mask(led->port); pm860x_set_bits(led->i2c, PM8606_WLED3B, mask, 0); + led_power_set(chip, led->port, 0); } } led->current_brightness = led->brightness; diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c index b6ef8f5..87de8d9 100644 --- a/drivers/macintosh/macio-adb.c +++ b/drivers/macintosh/macio-adb.c @@ -14,7 +14,6 @@ #include <asm/pgtable.h> #include <asm/hydra.h> #include <asm/irq.h> -#include <asm/system.h> #include <linux/init.h> #include <linux/ioport.h> diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index c60d025..fc71723 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -29,7 +29,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #undef DEBUG diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 0ff92c2..97cfc5a 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -127,7 +127,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/macio.h> diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 46c4e95..3b4a157 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -41,7 +41,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/macio.h> diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c index 971bc95..86511c5 100644 --- a/drivers/macintosh/via-cuda.c +++ b/drivers/macintosh/via-cuda.c @@ -26,7 +26,6 @@ #include <asm/mac_via.h> #endif #include <asm/io.h> -#include <asm/system.h> #include <linux/init.h> static volatile unsigned char __iomem *via; diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index c9570fc..3725f08 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -34,7 +34,6 @@ #include <asm/macintosh.h> #include <asm/macints.h> #include <asm/mac_via.h> -#include <asm/system.h> static volatile unsigned char *via; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 6cccd60..22b8ce4 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -50,7 +50,6 @@ #include <asm/machdep.h> #include <asm/io.h> #include <asm/pgtable.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/irq.h> #include <asm/pmac_feature.h> diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c index aeb30d0..a00ee41 100644 --- a/drivers/macintosh/via-pmu68k.c +++ b/drivers/macintosh/via-pmu68k.c @@ -37,7 +37,6 @@ #include <asm/mac_via.h> #include <asm/pgtable.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/uaccess.h> diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index 647c6ad..4d6a90a 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -18,7 +18,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/pmac_low_i2c.h> diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c index 30e6195..04067e0 100644 --- a/drivers/macintosh/windfarm_pm121.c +++ b/drivers/macintosh/windfarm_pm121.c @@ -215,7 +215,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/smu.h> diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c index 749d174..fc13d0f 100644 --- a/drivers/macintosh/windfarm_pm81.c +++ b/drivers/macintosh/windfarm_pm81.c @@ -107,7 +107,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/smu.h> diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c index 3442732..a9430ed 100644 --- a/drivers/macintosh/windfarm_pm91.c +++ b/drivers/macintosh/windfarm_pm91.c @@ -41,7 +41,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/smu.h> diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c index 43137b4..3c2be51 100644 --- a/drivers/macintosh/windfarm_smu_controls.c +++ b/drivers/macintosh/windfarm_smu_controls.c @@ -18,7 +18,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/smu.h> diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c index 3c19350..1cc4e49 100644 --- a/drivers/macintosh/windfarm_smu_sensors.c +++ b/drivers/macintosh/windfarm_smu_sensors.c @@ -18,7 +18,6 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sections.h> #include <asm/smu.h> diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index faa4741..10f122a 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -277,8 +277,8 @@ config DM_MIRROR needed for live data migration tools such as 'pvmove'. config DM_RAID - tristate "RAID 1/4/5/6 target (EXPERIMENTAL)" - depends on BLK_DEV_DM && EXPERIMENTAL + tristate "RAID 1/4/5/6 target" + depends on BLK_DEV_DM select MD_RAID1 select MD_RAID456 select BLK_DEV_MD @@ -359,8 +359,8 @@ config DM_DELAY If unsure, say N. config DM_UEVENT - bool "DM uevents (EXPERIMENTAL)" - depends on BLK_DEV_DM && EXPERIMENTAL + bool "DM uevents" + depends on BLK_DEV_DM ---help--- Generate udev events for DM events. @@ -370,4 +370,24 @@ config DM_FLAKEY ---help--- A target that intermittently fails I/O for debugging purposes. +config DM_VERITY + tristate "Verity target support (EXPERIMENTAL)" + depends on BLK_DEV_DM && EXPERIMENTAL + select CRYPTO + select CRYPTO_HASH + select DM_BUFIO + ---help--- + This device-mapper target creates a read-only device that + transparently validates the data on one underlying device against + a pre-generated tree of cryptographic checksums stored on a second + device. + + You'll need to activate the digests you're going to use in the + cryptoapi configuration. + + To compile this code as a module, choose M here: the module will + be called dm-verity. + + If unsure, say N. + endif # MD diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 046860c..8b2e0df 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o obj-$(CONFIG_DM_ZERO) += dm-zero.o obj-$(CONFIG_DM_RAID) += dm-raid.o obj-$(CONFIG_DM_THIN_PROVISIONING) += dm-thin-pool.o +obj-$(CONFIG_DM_VERITY) += dm-verity.o ifeq ($(CONFIG_DM_UEVENT),y) dm-mod-objs += dm-uevent.o diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index b6e58c7..cc06a1e 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -578,7 +578,7 @@ static void write_endio(struct bio *bio, int error) struct dm_buffer *b = container_of(bio, struct dm_buffer, bio); b->write_error = error; - if (error) { + if (unlikely(error)) { struct dm_bufio_client *c = b->c; (void)cmpxchg(&c->async_write_error, 0, error); } @@ -697,13 +697,20 @@ static void __wait_for_free_buffer(struct dm_bufio_client *c) dm_bufio_lock(c); } +enum new_flag { + NF_FRESH = 0, + NF_READ = 1, + NF_GET = 2, + NF_PREFETCH = 3 +}; + /* * Allocate a new buffer. If the allocation is not possible, wait until * some other thread frees a buffer. * * May drop the lock and regain it. */ -static struct dm_buffer *__alloc_buffer_wait_no_callback(struct dm_bufio_client *c) +static struct dm_buffer *__alloc_buffer_wait_no_callback(struct dm_bufio_client *c, enum new_flag nf) { struct dm_buffer *b; @@ -726,6 +733,9 @@ static struct dm_buffer *__alloc_buffer_wait_no_callback(struct dm_bufio_client return b; } + if (nf == NF_PREFETCH) + return NULL; + if (!list_empty(&c->reserved_buffers)) { b = list_entry(c->reserved_buffers.next, struct dm_buffer, lru_list); @@ -743,9 +753,12 @@ static struct dm_buffer *__alloc_buffer_wait_no_callback(struct dm_bufio_client } } -static struct dm_buffer *__alloc_buffer_wait(struct dm_bufio_client *c) +static struct dm_buffer *__alloc_buffer_wait(struct dm_bufio_client *c, enum new_flag nf) { - struct dm_buffer *b = __alloc_buffer_wait_no_callback(c); + struct dm_buffer *b = __alloc_buffer_wait_no_callback(c, nf); + + if (!b) + return NULL; if (c->alloc_callback) c->alloc_callback(b); @@ -865,32 +878,23 @@ static struct dm_buffer *__find(struct dm_bufio_client *c, sector_t block) * Getting a buffer *--------------------------------------------------------------*/ -enum new_flag { - NF_FRESH = 0, - NF_READ = 1, - NF_GET = 2 -}; - static struct dm_buffer *__bufio_new(struct dm_bufio_client *c, sector_t block, - enum new_flag nf, struct dm_buffer **bp, - int *need_submit) + enum new_flag nf, int *need_submit) { struct dm_buffer *b, *new_b = NULL; *need_submit = 0; b = __find(c, block); - if (b) { - b->hold_count++; - __relink_lru(b, test_bit(B_DIRTY, &b->state) || - test_bit(B_WRITING, &b->state)); - return b; - } + if (b) + goto found_buffer; if (nf == NF_GET) return NULL; - new_b = __alloc_buffer_wait(c); + new_b = __alloc_buffer_wait(c, nf); + if (!new_b) + return NULL; /* * We've had a period where the mutex was unlocked, so need to @@ -899,10 +903,7 @@ static struct dm_buffer *__bufio_new(struct dm_bufio_client *c, sector_t block, b = __find(c, block); if (b) { __free_buffer_wake(new_b); - b->hold_count++; - __relink_lru(b, test_bit(B_DIRTY, &b->state) || - test_bit(B_WRITING, &b->state)); - return b; + goto found_buffer; } __check_watermark(c); @@ -922,6 +923,24 @@ static struct dm_buffer *__bufio_new(struct dm_bufio_client *c, sector_t block, *need_submit = 1; return b; + +found_buffer: + if (nf == NF_PREFETCH) + return NULL; + /* + * Note: it is essential that we don't wait for the buffer to be + * read if dm_bufio_get function is used. Both dm_bufio_get and + * dm_bufio_prefetch can be used in the driver request routine. + * If the user called both dm_bufio_prefetch and dm_bufio_get on + * the same buffer, it would deadlock if we waited. + */ + if (nf == NF_GET && unlikely(test_bit(B_READING, &b->state))) + return NULL; + + b->hold_count++; + __relink_lru(b, test_bit(B_DIRTY, &b->state) || + test_bit(B_WRITING, &b->state)); + return b; } /* @@ -956,10 +975,10 @@ static void *new_read(struct dm_bufio_client *c, sector_t block, struct dm_buffer *b; dm_bufio_lock(c); - b = __bufio_new(c, block, nf, bp, &need_submit); + b = __bufio_new(c, block, nf, &need_submit); dm_bufio_unlock(c); - if (!b || IS_ERR(b)) + if (!b) return b; if (need_submit) @@ -1005,13 +1024,47 @@ void *dm_bufio_new(struct dm_bufio_client *c, sector_t block, } EXPORT_SYMBOL_GPL(dm_bufio_new); +void dm_bufio_prefetch(struct dm_bufio_client *c, + sector_t block, unsigned n_blocks) +{ + struct blk_plug plug; + + blk_start_plug(&plug); + dm_bufio_lock(c); + + for (; n_blocks--; block++) { + int need_submit; + struct dm_buffer *b; + b = __bufio_new(c, block, NF_PREFETCH, &need_submit); + if (unlikely(b != NULL)) { + dm_bufio_unlock(c); + + if (need_submit) + submit_io(b, READ, b->block, read_endio); + dm_bufio_release(b); + + dm_bufio_cond_resched(); + + if (!n_blocks) + goto flush_plug; + dm_bufio_lock(c); + } + + } + + dm_bufio_unlock(c); + +flush_plug: + blk_finish_plug(&plug); +} +EXPORT_SYMBOL_GPL(dm_bufio_prefetch); + void dm_bufio_release(struct dm_buffer *b) { struct dm_bufio_client *c = b->c; dm_bufio_lock(c); - BUG_ON(test_bit(B_READING, &b->state)); BUG_ON(!b->hold_count); b->hold_count--; @@ -1024,6 +1077,7 @@ void dm_bufio_release(struct dm_buffer *b) * invalid buffer. */ if ((b->read_error || b->write_error) && + !test_bit(B_READING, &b->state) && !test_bit(B_WRITING, &b->state) && !test_bit(B_DIRTY, &b->state)) { __unlink_buffer(b); @@ -1041,6 +1095,8 @@ void dm_bufio_mark_buffer_dirty(struct dm_buffer *b) dm_bufio_lock(c); + BUG_ON(test_bit(B_READING, &b->state)); + if (!test_and_set_bit(B_DIRTY, &b->state)) __relink_lru(b, LIST_DIRTY); diff --git a/drivers/md/dm-bufio.h b/drivers/md/dm-bufio.h index 5c4c3a0..b142946 100644 --- a/drivers/md/dm-bufio.h +++ b/drivers/md/dm-bufio.h @@ -63,6 +63,14 @@ void *dm_bufio_new(struct dm_bufio_client *c, sector_t block, struct dm_buffer **bp); /* + * Prefetch the specified blocks to the cache. + * The function starts to read the blocks and returns without waiting for + * I/O to finish. + */ +void dm_bufio_prefetch(struct dm_bufio_client *c, + sector_t block, unsigned n_blocks); + +/* * Release a reference obtained with dm_bufio_{read,get,new}. The data * pointer and dm_buffer pointer is no longer valid after this call. */ diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index db6b516..3f06df5 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -176,7 +176,6 @@ struct crypt_config { #define MIN_IOS 16 #define MIN_POOL_PAGES 32 -#define MIN_BIO_PAGES 8 static struct kmem_cache *_crypt_io_pool; @@ -848,12 +847,11 @@ static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned size, } /* - * if additional pages cannot be allocated without waiting, - * return a partially allocated bio, the caller will then try - * to allocate additional bios while submitting this partial bio + * If additional pages cannot be allocated without waiting, + * return a partially-allocated bio. The caller will then try + * to allocate more bios while submitting this partial bio. */ - if (i == (MIN_BIO_PAGES - 1)) - gfp_mask = (gfp_mask | __GFP_NOWARN) & ~__GFP_WAIT; + gfp_mask = (gfp_mask | __GFP_NOWARN) & ~__GFP_WAIT; len = (size > PAGE_SIZE) ? PAGE_SIZE : size; @@ -1046,16 +1044,14 @@ static void kcryptd_queue_io(struct dm_crypt_io *io) queue_work(cc->io_queue, &io->work); } -static void kcryptd_crypt_write_io_submit(struct dm_crypt_io *io, - int error, int async) +static void kcryptd_crypt_write_io_submit(struct dm_crypt_io *io, int async) { struct bio *clone = io->ctx.bio_out; struct crypt_config *cc = io->target->private; - if (unlikely(error < 0)) { + if (unlikely(io->error < 0)) { crypt_free_buffer_pages(cc, clone); bio_put(clone); - io->error = -EIO; crypt_dec_pending(io); return; } @@ -1106,12 +1102,16 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) sector += bio_sectors(clone); crypt_inc_pending(io); + r = crypt_convert(cc, &io->ctx); + if (r < 0) + io->error = -EIO; + crypt_finished = atomic_dec_and_test(&io->ctx.pending); /* Encryption was already finished, submit io now */ if (crypt_finished) { - kcryptd_crypt_write_io_submit(io, r, 0); + kcryptd_crypt_write_io_submit(io, 0); /* * If there was an error, do not try next fragments. @@ -1162,11 +1162,8 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) crypt_dec_pending(io); } -static void kcryptd_crypt_read_done(struct dm_crypt_io *io, int error) +static void kcryptd_crypt_read_done(struct dm_crypt_io *io) { - if (unlikely(error < 0)) - io->error = -EIO; - crypt_dec_pending(io); } @@ -1181,9 +1178,11 @@ static void kcryptd_crypt_read_convert(struct dm_crypt_io *io) io->sector); r = crypt_convert(cc, &io->ctx); + if (r < 0) + io->error = -EIO; if (atomic_dec_and_test(&io->ctx.pending)) - kcryptd_crypt_read_done(io, r); + kcryptd_crypt_read_done(io); crypt_dec_pending(io); } @@ -1204,15 +1203,18 @@ static void kcryptd_async_done(struct crypto_async_request *async_req, if (!error && cc->iv_gen_ops && cc->iv_gen_ops->post) error = cc->iv_gen_ops->post(cc, iv_of_dmreq(cc, dmreq), dmreq); + if (error < 0) + io->error = -EIO; + mempool_free(req_of_dmreq(cc, dmreq), cc->req_pool); if (!atomic_dec_and_test(&ctx->pending)) return; if (bio_data_dir(io->base_bio) == READ) - kcryptd_crypt_read_done(io, error); + kcryptd_crypt_read_done(io); else - kcryptd_crypt_write_io_submit(io, error, 1); + kcryptd_crypt_write_io_submit(io, 1); } static void kcryptd_crypt(struct work_struct *work) @@ -1413,6 +1415,7 @@ static int crypt_ctr_cipher(struct dm_target *ti, char *tmp, *cipher, *chainmode, *ivmode, *ivopts, *keycount; char *cipher_api = NULL; int cpu, ret = -EINVAL; + char dummy; /* Convert to crypto api definition? */ if (strchr(cipher_in, '(')) { @@ -1434,7 +1437,7 @@ static int crypt_ctr_cipher(struct dm_target *ti, if (!keycount) cc->tfms_count = 1; - else if (sscanf(keycount, "%u", &cc->tfms_count) != 1 || + else if (sscanf(keycount, "%u%c", &cc->tfms_count, &dummy) != 1 || !is_power_of_2(cc->tfms_count)) { ti->error = "Bad cipher key count specification"; return -EINVAL; @@ -1579,6 +1582,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) int ret; struct dm_arg_set as; const char *opt_string; + char dummy; static struct dm_arg _args[] = { {0, 1, "Invalid number of feature args"}, @@ -1636,7 +1640,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) } ret = -EINVAL; - if (sscanf(argv[2], "%llu", &tmpll) != 1) { + if (sscanf(argv[2], "%llu%c", &tmpll, &dummy) != 1) { ti->error = "Invalid iv_offset sector"; goto bad; } @@ -1647,7 +1651,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad; } - if (sscanf(argv[4], "%llu", &tmpll) != 1) { + if (sscanf(argv[4], "%llu%c", &tmpll, &dummy) != 1) { ti->error = "Invalid device sector"; goto bad; } diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index f18375d..2dc22dd 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -131,6 +131,7 @@ static int delay_ctr(struct dm_target *ti, unsigned int argc, char **argv) { struct delay_c *dc; unsigned long long tmpll; + char dummy; if (argc != 3 && argc != 6) { ti->error = "requires exactly 3 or 6 arguments"; @@ -145,13 +146,13 @@ static int delay_ctr(struct dm_target *ti, unsigned int argc, char **argv) dc->reads = dc->writes = 0; - if (sscanf(argv[1], "%llu", &tmpll) != 1) { + if (sscanf(argv[1], "%llu%c", &tmpll, &dummy) != 1) { ti->error = "Invalid device sector"; goto bad; } dc->start_read = tmpll; - if (sscanf(argv[2], "%u", &dc->read_delay) != 1) { + if (sscanf(argv[2], "%u%c", &dc->read_delay, &dummy) != 1) { ti->error = "Invalid delay"; goto bad; } @@ -166,13 +167,13 @@ static int delay_ctr(struct dm_target *ti, unsigned int argc, char **argv) if (argc == 3) goto out; - if (sscanf(argv[4], "%llu", &tmpll) != 1) { + if (sscanf(argv[4], "%llu%c", &tmpll, &dummy) != 1) { ti->error = "Invalid write device sector"; goto bad_dev_read; } dc->start_write = tmpll; - if (sscanf(argv[5], "%u", &dc->write_delay) != 1) { + if (sscanf(argv[5], "%u%c", &dc->write_delay, &dummy) != 1) { ti->error = "Invalid write delay"; goto bad_dev_read; } diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c index 042e719..aa70f7d 100644 --- a/drivers/md/dm-exception-store.c +++ b/drivers/md/dm-exception-store.c @@ -283,7 +283,7 @@ int dm_exception_store_init(void) return 0; persistent_fail: - dm_persistent_snapshot_exit(); + dm_transient_snapshot_exit(); transient_fail: return r; } diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c index b280c43..ac49c01 100644 --- a/drivers/md/dm-flakey.c +++ b/drivers/md/dm-flakey.c @@ -160,6 +160,7 @@ static int flakey_ctr(struct dm_target *ti, unsigned int argc, char **argv) unsigned long long tmpll; struct dm_arg_set as; const char *devname; + char dummy; as.argc = argc; as.argv = argv; @@ -178,7 +179,7 @@ static int flakey_ctr(struct dm_target *ti, unsigned int argc, char **argv) devname = dm_shift_arg(&as); - if (sscanf(dm_shift_arg(&as), "%llu", &tmpll) != 1) { + if (sscanf(dm_shift_arg(&as), "%llu%c", &tmpll, &dummy) != 1) { ti->error = "Invalid device sector"; goto bad; } diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 1ce84ed..a1a3e6d 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -880,6 +880,7 @@ static int dev_set_geometry(struct dm_ioctl *param, size_t param_size) struct hd_geometry geometry; unsigned long indata[4]; char *geostr = (char *) param + param->data_start; + char dummy; md = find_device(param); if (!md) @@ -891,8 +892,8 @@ static int dev_set_geometry(struct dm_ioctl *param, size_t param_size) goto out; } - x = sscanf(geostr, "%lu %lu %lu %lu", indata, - indata + 1, indata + 2, indata + 3); + x = sscanf(geostr, "%lu %lu %lu %lu%c", indata, + indata + 1, indata + 2, indata + 3, &dummy); if (x != 4) { DMWARN("Unable to interpret geometry settings."); diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index 9728839..3639eea 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -29,6 +29,7 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv) { struct linear_c *lc; unsigned long long tmp; + char dummy; if (argc != 2) { ti->error = "Invalid argument count"; @@ -41,7 +42,7 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv) return -ENOMEM; } - if (sscanf(argv[1], "%llu", &tmp) != 1) { + if (sscanf(argv[1], "%llu%c", &tmp, &dummy) != 1) { ti->error = "dm-linear: Invalid device sector"; goto bad; } diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 3b52bb7..65ebaeb 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -369,6 +369,7 @@ static int create_log_context(struct dm_dirty_log *log, struct dm_target *ti, unsigned int region_count; size_t bitset_size, buf_size; int r; + char dummy; if (argc < 1 || argc > 2) { DMWARN("wrong number of arguments to dirty region log"); @@ -387,7 +388,7 @@ static int create_log_context(struct dm_dirty_log *log, struct dm_target *ti, } } - if (sscanf(argv[0], "%u", ®ion_size) != 1 || + if (sscanf(argv[0], "%u%c", ®ion_size, &dummy) != 1 || !_check_region_size(ti, region_size)) { DMWARN("invalid region size %s", argv[0]); return -EINVAL; diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 801d92d..922a338 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -226,6 +226,27 @@ static void free_multipath(struct multipath *m) kfree(m); } +static int set_mapinfo(struct multipath *m, union map_info *info) +{ + struct dm_mpath_io *mpio; + + mpio = mempool_alloc(m->mpio_pool, GFP_ATOMIC); + if (!mpio) + return -ENOMEM; + + memset(mpio, 0, sizeof(*mpio)); + info->ptr = mpio; + + return 0; +} + +static void clear_mapinfo(struct multipath *m, union map_info *info) +{ + struct dm_mpath_io *mpio = info->ptr; + + info->ptr = NULL; + mempool_free(mpio, m->mpio_pool); +} /*----------------------------------------------- * Path selection @@ -341,13 +362,14 @@ static int __must_push_back(struct multipath *m) } static int map_io(struct multipath *m, struct request *clone, - struct dm_mpath_io *mpio, unsigned was_queued) + union map_info *map_context, unsigned was_queued) { int r = DM_MAPIO_REMAPPED; size_t nr_bytes = blk_rq_bytes(clone); unsigned long flags; struct pgpath *pgpath; struct block_device *bdev; + struct dm_mpath_io *mpio = map_context->ptr; spin_lock_irqsave(&m->lock, flags); @@ -423,7 +445,6 @@ static void dispatch_queued_ios(struct multipath *m) { int r; unsigned long flags; - struct dm_mpath_io *mpio; union map_info *info; struct request *clone, *n; LIST_HEAD(cl); @@ -436,16 +457,15 @@ static void dispatch_queued_ios(struct multipath *m) list_del_init(&clone->queuelist); info = dm_get_rq_mapinfo(clone); - mpio = info->ptr; - r = map_io(m, clone, mpio, 1); + r = map_io(m, clone, info, 1); if (r < 0) { - mempool_free(mpio, m->mpio_pool); + clear_mapinfo(m, info); dm_kill_unmapped_request(clone, r); } else if (r == DM_MAPIO_REMAPPED) dm_dispatch_request(clone); else if (r == DM_MAPIO_REQUEUE) { - mempool_free(mpio, m->mpio_pool); + clear_mapinfo(m, info); dm_requeue_unmapped_request(clone); } } @@ -908,20 +928,16 @@ static int multipath_map(struct dm_target *ti, struct request *clone, union map_info *map_context) { int r; - struct dm_mpath_io *mpio; struct multipath *m = (struct multipath *) ti->private; - mpio = mempool_alloc(m->mpio_pool, GFP_ATOMIC); - if (!mpio) + if (set_mapinfo(m, map_context) < 0) /* ENOMEM, requeue */ return DM_MAPIO_REQUEUE; - memset(mpio, 0, sizeof(*mpio)); - map_context->ptr = mpio; clone->cmd_flags |= REQ_FAILFAST_TRANSPORT; - r = map_io(m, clone, mpio, 0); + r = map_io(m, clone, map_context, 0); if (r < 0 || r == DM_MAPIO_REQUEUE) - mempool_free(mpio, m->mpio_pool); + clear_mapinfo(m, map_context); return r; } @@ -1054,8 +1070,9 @@ static int switch_pg_num(struct multipath *m, const char *pgstr) struct priority_group *pg; unsigned pgnum; unsigned long flags; + char dummy; - if (!pgstr || (sscanf(pgstr, "%u", &pgnum) != 1) || !pgnum || + if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum || (pgnum > m->nr_priority_groups)) { DMWARN("invalid PG number supplied to switch_pg_num"); return -EINVAL; @@ -1085,8 +1102,9 @@ static int bypass_pg_num(struct multipath *m, const char *pgstr, int bypassed) { struct priority_group *pg; unsigned pgnum; + char dummy; - if (!pgstr || (sscanf(pgstr, "%u", &pgnum) != 1) || !pgnum || + if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum || (pgnum > m->nr_priority_groups)) { DMWARN("invalid PG number supplied to bypass_pg"); return -EINVAL; @@ -1261,13 +1279,15 @@ static int multipath_end_io(struct dm_target *ti, struct request *clone, struct path_selector *ps; int r; + BUG_ON(!mpio); + r = do_end_io(m, clone, error, mpio); if (pgpath) { ps = &pgpath->pg->ps; if (ps->type->end_io) ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes); } - mempool_free(mpio, m->mpio_pool); + clear_mapinfo(m, map_context); return r; } diff --git a/drivers/md/dm-queue-length.c b/drivers/md/dm-queue-length.c index 03a837a..3941fae 100644 --- a/drivers/md/dm-queue-length.c +++ b/drivers/md/dm-queue-length.c @@ -112,6 +112,7 @@ static int ql_add_path(struct path_selector *ps, struct dm_path *path, struct selector *s = ps->context; struct path_info *pi; unsigned repeat_count = QL_MIN_IO; + char dummy; /* * Arguments: [<repeat_count>] @@ -123,7 +124,7 @@ static int ql_add_path(struct path_selector *ps, struct dm_path *path, return -EINVAL; } - if ((argc == 1) && (sscanf(argv[0], "%u", &repeat_count) != 1)) { + if ((argc == 1) && (sscanf(argv[0], "%u%c", &repeat_count, &dummy) != 1)) { *error = "queue-length ps: invalid repeat count"; return -EINVAL; } diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index c5a875d..b0ba524 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -604,7 +604,9 @@ static int read_disk_sb(struct md_rdev *rdev, int size) return 0; if (!sync_page_io(rdev, 0, size, rdev->sb_page, READ, 1)) { - DMERR("Failed to read device superblock"); + DMERR("Failed to read superblock of device at position %d", + rdev->raid_disk); + set_bit(Faulty, &rdev->flags); return -EINVAL; } @@ -855,9 +857,25 @@ static int super_validate(struct mddev *mddev, struct md_rdev *rdev) static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs) { int ret; + unsigned redundancy = 0; + struct raid_dev *dev; struct md_rdev *rdev, *freshest; struct mddev *mddev = &rs->md; + switch (rs->raid_type->level) { + case 1: + redundancy = rs->md.raid_disks - 1; + break; + case 4: + case 5: + case 6: + redundancy = rs->raid_type->parity_devs; + break; + default: + ti->error = "Unknown RAID type"; + return -EINVAL; + } + freshest = NULL; rdev_for_each(rdev, mddev) { if (!rdev->meta_bdev) @@ -872,6 +890,37 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs) case 0: break; default: + dev = container_of(rdev, struct raid_dev, rdev); + if (redundancy--) { + if (dev->meta_dev) + dm_put_device(ti, dev->meta_dev); + + dev->meta_dev = NULL; + rdev->meta_bdev = NULL; + + if (rdev->sb_page) + put_page(rdev->sb_page); + + rdev->sb_page = NULL; + + rdev->sb_loaded = 0; + + /* + * We might be able to salvage the data device + * even though the meta device has failed. For + * now, we behave as though '- -' had been + * set for this device in the table. + */ + if (dev->data_dev) + dm_put_device(ti, dev->data_dev); + + dev->data_dev = NULL; + rdev->bdev = NULL; + + list_del(&rdev->same_set); + + continue; + } ti->error = "Failed to load superblock"; return ret; } @@ -1214,7 +1263,7 @@ static void raid_resume(struct dm_target *ti) static struct target_type raid_target = { .name = "raid", - .version = {1, 1, 0}, + .version = {1, 2, 0}, .module = THIS_MODULE, .ctr = raid_ctr, .dtr = raid_dtr, diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 9bfd057..d039de8 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -924,8 +924,9 @@ static int get_mirror(struct mirror_set *ms, struct dm_target *ti, unsigned int mirror, char **argv) { unsigned long long offset; + char dummy; - if (sscanf(argv[1], "%llu", &offset) != 1) { + if (sscanf(argv[1], "%llu%c", &offset, &dummy) != 1) { ti->error = "Invalid offset"; return -EINVAL; } @@ -953,13 +954,14 @@ static struct dm_dirty_log *create_dirty_log(struct dm_target *ti, { unsigned param_count; struct dm_dirty_log *dl; + char dummy; if (argc < 2) { ti->error = "Insufficient mirror log arguments"; return NULL; } - if (sscanf(argv[1], "%u", ¶m_count) != 1) { + if (sscanf(argv[1], "%u%c", ¶m_count, &dummy) != 1) { ti->error = "Invalid mirror log argument count"; return NULL; } @@ -986,13 +988,14 @@ static int parse_features(struct mirror_set *ms, unsigned argc, char **argv, { unsigned num_features; struct dm_target *ti = ms->ti; + char dummy; *args_used = 0; if (!argc) return 0; - if (sscanf(argv[0], "%u", &num_features) != 1) { + if (sscanf(argv[0], "%u%c", &num_features, &dummy) != 1) { ti->error = "Invalid number of features"; return -EINVAL; } @@ -1036,6 +1039,7 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) unsigned int nr_mirrors, m, args_used; struct mirror_set *ms; struct dm_dirty_log *dl; + char dummy; dl = create_dirty_log(ti, argc, argv, &args_used); if (!dl) @@ -1044,7 +1048,7 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) argv += args_used; argc -= args_used; - if (!argc || sscanf(argv[0], "%u", &nr_mirrors) != 1 || + if (!argc || sscanf(argv[0], "%u%c", &nr_mirrors, &dummy) != 1 || nr_mirrors < 2 || nr_mirrors > DM_KCOPYD_MAX_REGIONS + 1) { ti->error = "Invalid number of mirrors"; dm_dirty_log_destroy(dl); diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c index 27f1d42..6ab1192 100644 --- a/drivers/md/dm-round-robin.c +++ b/drivers/md/dm-round-robin.c @@ -114,6 +114,7 @@ static int rr_add_path(struct path_selector *ps, struct dm_path *path, struct selector *s = (struct selector *) ps->context; struct path_info *pi; unsigned repeat_count = RR_MIN_IO; + char dummy; if (argc > 1) { *error = "round-robin ps: incorrect number of arguments"; @@ -121,7 +122,7 @@ static int rr_add_path(struct path_selector *ps, struct dm_path *path, } /* First path argument is number of I/Os before switching path */ - if ((argc == 1) && (sscanf(argv[0], "%u", &repeat_count) != 1)) { + if ((argc == 1) && (sscanf(argv[0], "%u%c", &repeat_count, &dummy) != 1)) { *error = "round-robin ps: invalid repeat count"; return -EINVAL; } diff --git a/drivers/md/dm-service-time.c b/drivers/md/dm-service-time.c index 59883bd..9df8f6b 100644 --- a/drivers/md/dm-service-time.c +++ b/drivers/md/dm-service-time.c @@ -110,6 +110,7 @@ static int st_add_path(struct path_selector *ps, struct dm_path *path, struct path_info *pi; unsigned repeat_count = ST_MIN_IO; unsigned relative_throughput = 1; + char dummy; /* * Arguments: [<repeat_count> [<relative_throughput>]] @@ -128,13 +129,13 @@ static int st_add_path(struct path_selector *ps, struct dm_path *path, return -EINVAL; } - if (argc && (sscanf(argv[0], "%u", &repeat_count) != 1)) { + if (argc && (sscanf(argv[0], "%u%c", &repeat_count, &dummy) != 1)) { *error = "service-time ps: invalid repeat count"; return -EINVAL; } if ((argc == 2) && - (sscanf(argv[1], "%u", &relative_throughput) != 1 || + (sscanf(argv[1], "%u%c", &relative_throughput, &dummy) != 1 || relative_throughput > ST_MAX_RELATIVE_THROUGHPUT)) { *error = "service-time ps: invalid relative_throughput value"; return -EINVAL; diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index 3d80cf0..35c94ff 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -75,8 +75,9 @@ static int get_stripe(struct dm_target *ti, struct stripe_c *sc, unsigned int stripe, char **argv) { unsigned long long start; + char dummy; - if (sscanf(argv[1], "%llu", &start) != 1) + if (sscanf(argv[1], "%llu%c", &start, &dummy) != 1) return -EINVAL; if (dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 63cc542..2e227fb 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -268,8 +268,7 @@ void dm_table_destroy(struct dm_table *t) vfree(t->highs); /* free the device list */ - if (t->devices.next != &t->devices) - free_devices(&t->devices); + free_devices(&t->devices); dm_free_md_mempools(t->mempools); @@ -464,10 +463,11 @@ int dm_get_device(struct dm_target *ti, const char *path, fmode_t mode, struct dm_dev_internal *dd; unsigned int major, minor; struct dm_table *t = ti->table; + char dummy; BUG_ON(!t); - if (sscanf(path, "%u:%u", &major, &minor) == 2) { + if (sscanf(path, "%u:%u%c", &major, &minor, &dummy) == 2) { /* Extract the major/minor numbers */ dev = MKDEV(major, minor); if (MAJOR(dev) != major || MINOR(dev) != minor) @@ -842,9 +842,10 @@ static int validate_next_arg(struct dm_arg *arg, struct dm_arg_set *arg_set, unsigned *value, char **error, unsigned grouped) { const char *arg_str = dm_shift_arg(arg_set); + char dummy; if (!arg_str || - (sscanf(arg_str, "%u", value) != 1) || + (sscanf(arg_str, "%u%c", value, &dummy) != 1) || (*value < arg->min) || (*value > arg->max) || (grouped && arg_set->argc < *value)) { diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 237571a..737d388 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -614,7 +614,7 @@ static int __commit_transaction(struct dm_pool_metadata *pmd) if (r < 0) goto out; - r = dm_sm_root_size(pmd->metadata_sm, &data_len); + r = dm_sm_root_size(pmd->data_sm, &data_len); if (r < 0) goto out; @@ -713,6 +713,9 @@ struct dm_pool_metadata *dm_pool_metadata_open(struct block_device *bdev, if (r) goto bad; + if (bdev_size > THIN_METADATA_MAX_SECTORS) + bdev_size = THIN_METADATA_MAX_SECTORS; + disk_super = dm_block_data(sblock); disk_super->magic = cpu_to_le64(THIN_SUPERBLOCK_MAGIC); disk_super->version = cpu_to_le32(THIN_VERSION); diff --git a/drivers/md/dm-thin-metadata.h b/drivers/md/dm-thin-metadata.h index 859c168..ed4725e 100644 --- a/drivers/md/dm-thin-metadata.h +++ b/drivers/md/dm-thin-metadata.h @@ -11,6 +11,19 @@ #define THIN_METADATA_BLOCK_SIZE 4096 +/* + * The metadata device is currently limited in size. + * + * We have one block of index, which can hold 255 index entries. Each + * index entry contains allocation info about 16k metadata blocks. + */ +#define THIN_METADATA_MAX_SECTORS (255 * (1 << 14) * (THIN_METADATA_BLOCK_SIZE / (1 << SECTOR_SHIFT))) + +/* + * A metadata device larger than 16GB triggers a warning. + */ +#define THIN_METADATA_MAX_SECTORS_WARNING (16 * (1024 * 1024 * 1024 >> SECTOR_SHIFT)) + /*----------------------------------------------------------------*/ struct dm_pool_metadata; diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index c308757..213ae32 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -23,6 +23,7 @@ #define DEFERRED_SET_SIZE 64 #define MAPPING_POOL_SIZE 1024 #define PRISON_CELLS 1024 +#define COMMIT_PERIOD HZ /* * The block size of the device holding pool data must be @@ -32,16 +33,6 @@ #define DATA_DEV_BLOCK_SIZE_MAX_SECTORS (1024 * 1024 * 1024 >> SECTOR_SHIFT) /* - * The metadata device is currently limited in size. The limitation is - * checked lower down in dm-space-map-metadata, but we also check it here - * so we can fail early. - * - * We have one block of index, which can hold 255 index entries. Each - * index entry contains allocation info about 16k metadata blocks. - */ -#define METADATA_DEV_MAX_SECTORS (255 * (1 << 14) * (THIN_METADATA_BLOCK_SIZE / (1 << SECTOR_SHIFT))) - -/* * Device id is restricted to 24 bits. */ #define MAX_DEV_ID ((1 << 24) - 1) @@ -72,7 +63,7 @@ * missed out if the io covers the block. (schedule_copy). * * iv) insert the new mapping into the origin's btree - * (process_prepared_mappings). This act of inserting breaks some + * (process_prepared_mapping). This act of inserting breaks some * sharing of btree nodes between the two devices. Breaking sharing only * effects the btree of that specific device. Btrees for the other * devices that share the block never change. The btree for the origin @@ -124,7 +115,7 @@ struct cell { struct hlist_node list; struct bio_prison *prison; struct cell_key key; - unsigned count; + struct bio *holder; struct bio_list bios; }; @@ -220,54 +211,59 @@ static struct cell *__search_bucket(struct hlist_head *bucket, * This may block if a new cell needs allocating. You must ensure that * cells will be unlocked even if the calling thread is blocked. * - * Returns the number of entries in the cell prior to the new addition - * or < 0 on failure. + * Returns 1 if the cell was already held, 0 if @inmate is the new holder. */ static int bio_detain(struct bio_prison *prison, struct cell_key *key, struct bio *inmate, struct cell **ref) { - int r; + int r = 1; unsigned long flags; uint32_t hash = hash_key(prison, key); - struct cell *uninitialized_var(cell), *cell2 = NULL; + struct cell *cell, *cell2; BUG_ON(hash > prison->nr_buckets); spin_lock_irqsave(&prison->lock, flags); + cell = __search_bucket(prison->cells + hash, key); + if (cell) { + bio_list_add(&cell->bios, inmate); + goto out; + } - if (!cell) { - /* - * Allocate a new cell - */ - spin_unlock_irqrestore(&prison->lock, flags); - cell2 = mempool_alloc(prison->cell_pool, GFP_NOIO); - spin_lock_irqsave(&prison->lock, flags); + /* + * Allocate a new cell + */ + spin_unlock_irqrestore(&prison->lock, flags); + cell2 = mempool_alloc(prison->cell_pool, GFP_NOIO); + spin_lock_irqsave(&prison->lock, flags); - /* - * We've been unlocked, so we have to double check that - * nobody else has inserted this cell in the meantime. - */ - cell = __search_bucket(prison->cells + hash, key); + /* + * We've been unlocked, so we have to double check that + * nobody else has inserted this cell in the meantime. + */ + cell = __search_bucket(prison->cells + hash, key); + if (cell) { + mempool_free(cell2, prison->cell_pool); + bio_list_add(&cell->bios, inmate); + goto out; + } - if (!cell) { - cell = cell2; - cell2 = NULL; + /* + * Use new cell. + */ + cell = cell2; - cell->prison = prison; - memcpy(&cell->key, key, sizeof(cell->key)); - cell->count = 0; - bio_list_init(&cell->bios); - hlist_add_head(&cell->list, prison->cells + hash); - } - } + cell->prison = prison; + memcpy(&cell->key, key, sizeof(cell->key)); + cell->holder = inmate; + bio_list_init(&cell->bios); + hlist_add_head(&cell->list, prison->cells + hash); - r = cell->count++; - bio_list_add(&cell->bios, inmate); - spin_unlock_irqrestore(&prison->lock, flags); + r = 0; - if (cell2) - mempool_free(cell2, prison->cell_pool); +out: + spin_unlock_irqrestore(&prison->lock, flags); *ref = cell; @@ -283,8 +279,8 @@ static void __cell_release(struct cell *cell, struct bio_list *inmates) hlist_del(&cell->list); - if (inmates) - bio_list_merge(inmates, &cell->bios); + bio_list_add(inmates, cell->holder); + bio_list_merge(inmates, &cell->bios); mempool_free(cell, prison->cell_pool); } @@ -305,22 +301,44 @@ static void cell_release(struct cell *cell, struct bio_list *bios) * bio may be in the cell. This function releases the cell, and also does * a sanity check. */ +static void __cell_release_singleton(struct cell *cell, struct bio *bio) +{ + hlist_del(&cell->list); + BUG_ON(cell->holder != bio); + BUG_ON(!bio_list_empty(&cell->bios)); +} + static void cell_release_singleton(struct cell *cell, struct bio *bio) { - struct bio_prison *prison = cell->prison; - struct bio_list bios; - struct bio *b; unsigned long flags; - - bio_list_init(&bios); + struct bio_prison *prison = cell->prison; spin_lock_irqsave(&prison->lock, flags); - __cell_release(cell, &bios); + __cell_release_singleton(cell, bio); spin_unlock_irqrestore(&prison->lock, flags); +} + +/* + * Sometimes we don't want the holder, just the additional bios. + */ +static void __cell_release_no_holder(struct cell *cell, struct bio_list *inmates) +{ + struct bio_prison *prison = cell->prison; + + hlist_del(&cell->list); + bio_list_merge(inmates, &cell->bios); - b = bio_list_pop(&bios); - BUG_ON(b != bio); - BUG_ON(!bio_list_empty(&bios)); + mempool_free(cell, prison->cell_pool); +} + +static void cell_release_no_holder(struct cell *cell, struct bio_list *inmates) +{ + unsigned long flags; + struct bio_prison *prison = cell->prison; + + spin_lock_irqsave(&prison->lock, flags); + __cell_release_no_holder(cell, inmates); + spin_unlock_irqrestore(&prison->lock, flags); } static void cell_error(struct cell *cell) @@ -471,6 +489,13 @@ static void build_virtual_key(struct dm_thin_device *td, dm_block_t b, * devices. */ struct new_mapping; + +struct pool_features { + unsigned zero_new_blocks:1; + unsigned discard_enabled:1; + unsigned discard_passdown:1; +}; + struct pool { struct list_head list; struct dm_target *ti; /* Only set if a pool target is bound */ @@ -484,7 +509,7 @@ struct pool { dm_block_t offset_mask; dm_block_t low_water_blocks; - unsigned zero_new_blocks:1; + struct pool_features pf; unsigned low_water_triggered:1; /* A dm event has been sent */ unsigned no_free_space:1; /* A -ENOSPC warning has been issued */ @@ -493,17 +518,21 @@ struct pool { struct workqueue_struct *wq; struct work_struct worker; + struct delayed_work waker; unsigned ref_count; + unsigned long last_commit_jiffies; spinlock_t lock; struct bio_list deferred_bios; struct bio_list deferred_flush_bios; struct list_head prepared_mappings; + struct list_head prepared_discards; struct bio_list retry_on_resume_list; - struct deferred_set ds; /* FIXME: move to thin_c */ + struct deferred_set shared_read_ds; + struct deferred_set all_io_ds; struct new_mapping *next_mapping; mempool_t *mapping_pool; @@ -521,7 +550,7 @@ struct pool_c { struct dm_target_callbacks callbacks; dm_block_t low_water_blocks; - unsigned zero_new_blocks:1; + struct pool_features pf; }; /* @@ -529,6 +558,7 @@ struct pool_c { */ struct thin_c { struct dm_dev *pool_dev; + struct dm_dev *origin_dev; dm_thin_id dev_id; struct pool *pool; @@ -597,6 +627,13 @@ static struct pool *__pool_table_lookup_metadata_dev(struct block_device *md_dev /*----------------------------------------------------------------*/ +struct endio_hook { + struct thin_c *tc; + struct deferred_entry *shared_read_entry; + struct deferred_entry *all_io_entry; + struct new_mapping *overwrite_mapping; +}; + static void __requeue_bio_list(struct thin_c *tc, struct bio_list *master) { struct bio *bio; @@ -607,7 +644,8 @@ static void __requeue_bio_list(struct thin_c *tc, struct bio_list *master) bio_list_init(master); while ((bio = bio_list_pop(&bios))) { - if (dm_get_mapinfo(bio)->ptr == tc) + struct endio_hook *h = dm_get_mapinfo(bio)->ptr; + if (h->tc == tc) bio_endio(bio, DM_ENDIO_REQUEUE); else bio_list_add(master, bio); @@ -646,14 +684,16 @@ static void remap(struct thin_c *tc, struct bio *bio, dm_block_t block) (bio->bi_sector & pool->offset_mask); } -static void remap_and_issue(struct thin_c *tc, struct bio *bio, - dm_block_t block) +static void remap_to_origin(struct thin_c *tc, struct bio *bio) +{ + bio->bi_bdev = tc->origin_dev->bdev; +} + +static void issue(struct thin_c *tc, struct bio *bio) { struct pool *pool = tc->pool; unsigned long flags; - remap(tc, bio, block); - /* * Batch together any FUA/FLUSH bios we find and then issue * a single commit for them in process_deferred_bios(). @@ -666,6 +706,19 @@ static void remap_and_issue(struct thin_c *tc, struct bio *bio, generic_make_request(bio); } +static void remap_to_origin_and_issue(struct thin_c *tc, struct bio *bio) +{ + remap_to_origin(tc, bio); + issue(tc, bio); +} + +static void remap_and_issue(struct thin_c *tc, struct bio *bio, + dm_block_t block) +{ + remap(tc, bio, block); + issue(tc, bio); +} + /* * wake_worker() is used when new work is queued and when pool_resume is * ready to continue deferred IO processing. @@ -680,21 +733,17 @@ static void wake_worker(struct pool *pool) /* * Bio endio functions. */ -struct endio_hook { - struct thin_c *tc; - bio_end_io_t *saved_bi_end_io; - struct deferred_entry *entry; -}; - struct new_mapping { struct list_head list; - int prepared; + unsigned quiesced:1; + unsigned prepared:1; + unsigned pass_discard:1; struct thin_c *tc; dm_block_t virt_block; dm_block_t data_block; - struct cell *cell; + struct cell *cell, *cell2; int err; /* @@ -711,7 +760,7 @@ static void __maybe_add_mapping(struct new_mapping *m) { struct pool *pool = m->tc->pool; - if (list_empty(&m->list) && m->prepared) { + if (m->quiesced && m->prepared) { list_add(&m->list, &pool->prepared_mappings); wake_worker(pool); } @@ -734,7 +783,8 @@ static void copy_complete(int read_err, unsigned long write_err, void *context) static void overwrite_endio(struct bio *bio, int err) { unsigned long flags; - struct new_mapping *m = dm_get_mapinfo(bio)->ptr; + struct endio_hook *h = dm_get_mapinfo(bio)->ptr; + struct new_mapping *m = h->overwrite_mapping; struct pool *pool = m->tc->pool; m->err = err; @@ -745,31 +795,6 @@ static void overwrite_endio(struct bio *bio, int err) spin_unlock_irqrestore(&pool->lock, flags); } -static void shared_read_endio(struct bio *bio, int err) -{ - struct list_head mappings; - struct new_mapping *m, *tmp; - struct endio_hook *h = dm_get_mapinfo(bio)->ptr; - unsigned long flags; - struct pool *pool = h->tc->pool; - - bio->bi_end_io = h->saved_bi_end_io; - bio_endio(bio, err); - - INIT_LIST_HEAD(&mappings); - ds_dec(h->entry, &mappings); - - spin_lock_irqsave(&pool->lock, flags); - list_for_each_entry_safe(m, tmp, &mappings, list) { - list_del(&m->list); - INIT_LIST_HEAD(&m->list); - __maybe_add_mapping(m); - } - spin_unlock_irqrestore(&pool->lock, flags); - - mempool_free(h, pool->endio_hook_pool); -} - /*----------------------------------------------------------------*/ /* @@ -800,21 +825,16 @@ static void cell_defer(struct thin_c *tc, struct cell *cell, * Same as cell_defer above, except it omits one particular detainee, * a write bio that covers the block and has already been processed. */ -static void cell_defer_except(struct thin_c *tc, struct cell *cell, - struct bio *exception) +static void cell_defer_except(struct thin_c *tc, struct cell *cell) { struct bio_list bios; - struct bio *bio; struct pool *pool = tc->pool; unsigned long flags; bio_list_init(&bios); - cell_release(cell, &bios); spin_lock_irqsave(&pool->lock, flags); - while ((bio = bio_list_pop(&bios))) - if (bio != exception) - bio_list_add(&pool->deferred_bios, bio); + cell_release_no_holder(cell, &pool->deferred_bios); spin_unlock_irqrestore(&pool->lock, flags); wake_worker(pool); @@ -854,7 +874,7 @@ static void process_prepared_mapping(struct new_mapping *m) * the bios in the cell. */ if (bio) { - cell_defer_except(tc, m->cell, bio); + cell_defer_except(tc, m->cell); bio_endio(bio, 0); } else cell_defer(tc, m->cell, m->data_block); @@ -863,7 +883,30 @@ static void process_prepared_mapping(struct new_mapping *m) mempool_free(m, tc->pool->mapping_pool); } -static void process_prepared_mappings(struct pool *pool) +static void process_prepared_discard(struct new_mapping *m) +{ + int r; + struct thin_c *tc = m->tc; + + r = dm_thin_remove_block(tc->td, m->virt_block); + if (r) + DMERR("dm_thin_remove_block() failed"); + + /* + * Pass the discard down to the underlying device? + */ + if (m->pass_discard) + remap_and_issue(tc, m->bio, m->data_block); + else + bio_endio(m->bio, 0); + + cell_defer_except(tc, m->cell); + cell_defer_except(tc, m->cell2); + mempool_free(m, tc->pool->mapping_pool); +} + +static void process_prepared(struct pool *pool, struct list_head *head, + void (*fn)(struct new_mapping *)) { unsigned long flags; struct list_head maps; @@ -871,21 +914,27 @@ static void process_prepared_mappings(struct pool *pool) INIT_LIST_HEAD(&maps); spin_lock_irqsave(&pool->lock, flags); - list_splice_init(&pool->prepared_mappings, &maps); + list_splice_init(head, &maps); spin_unlock_irqrestore(&pool->lock, flags); list_for_each_entry_safe(m, tmp, &maps, list) - process_prepared_mapping(m); + fn(m); } /* * Deferred bio jobs. */ -static int io_overwrites_block(struct pool *pool, struct bio *bio) +static int io_overlaps_block(struct pool *pool, struct bio *bio) { - return ((bio_data_dir(bio) == WRITE) && - !(bio->bi_sector & pool->offset_mask)) && + return !(bio->bi_sector & pool->offset_mask) && (bio->bi_size == (pool->sectors_per_block << SECTOR_SHIFT)); + +} + +static int io_overwrites_block(struct pool *pool, struct bio *bio) +{ + return (bio_data_dir(bio) == WRITE) && + io_overlaps_block(pool, bio); } static void save_and_set_endio(struct bio *bio, bio_end_io_t **save, @@ -917,7 +966,8 @@ static struct new_mapping *get_next_mapping(struct pool *pool) } static void schedule_copy(struct thin_c *tc, dm_block_t virt_block, - dm_block_t data_origin, dm_block_t data_dest, + struct dm_dev *origin, dm_block_t data_origin, + dm_block_t data_dest, struct cell *cell, struct bio *bio) { int r; @@ -925,6 +975,7 @@ static void schedule_copy(struct thin_c *tc, dm_block_t virt_block, struct new_mapping *m = get_next_mapping(pool); INIT_LIST_HEAD(&m->list); + m->quiesced = 0; m->prepared = 0; m->tc = tc; m->virt_block = virt_block; @@ -933,7 +984,8 @@ static void schedule_copy(struct thin_c *tc, dm_block_t virt_block, m->err = 0; m->bio = NULL; - ds_add_work(&pool->ds, &m->list); + if (!ds_add_work(&pool->shared_read_ds, &m->list)) + m->quiesced = 1; /* * IO to pool_dev remaps to the pool target's data_dev. @@ -942,14 +994,15 @@ static void schedule_copy(struct thin_c *tc, dm_block_t virt_block, * bio immediately. Otherwise we use kcopyd to clone the data first. */ if (io_overwrites_block(pool, bio)) { + struct endio_hook *h = dm_get_mapinfo(bio)->ptr; + h->overwrite_mapping = m; m->bio = bio; save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio); - dm_get_mapinfo(bio)->ptr = m; remap_and_issue(tc, bio, data_dest); } else { struct dm_io_region from, to; - from.bdev = tc->pool_dev->bdev; + from.bdev = origin->bdev; from.sector = data_origin * pool->sectors_per_block; from.count = pool->sectors_per_block; @@ -967,6 +1020,22 @@ static void schedule_copy(struct thin_c *tc, dm_block_t virt_block, } } +static void schedule_internal_copy(struct thin_c *tc, dm_block_t virt_block, + dm_block_t data_origin, dm_block_t data_dest, + struct cell *cell, struct bio *bio) +{ + schedule_copy(tc, virt_block, tc->pool_dev, + data_origin, data_dest, cell, bio); +} + +static void schedule_external_copy(struct thin_c *tc, dm_block_t virt_block, + dm_block_t data_dest, + struct cell *cell, struct bio *bio) +{ + schedule_copy(tc, virt_block, tc->origin_dev, + virt_block, data_dest, cell, bio); +} + static void schedule_zero(struct thin_c *tc, dm_block_t virt_block, dm_block_t data_block, struct cell *cell, struct bio *bio) @@ -975,6 +1044,7 @@ static void schedule_zero(struct thin_c *tc, dm_block_t virt_block, struct new_mapping *m = get_next_mapping(pool); INIT_LIST_HEAD(&m->list); + m->quiesced = 1; m->prepared = 0; m->tc = tc; m->virt_block = virt_block; @@ -988,13 +1058,14 @@ static void schedule_zero(struct thin_c *tc, dm_block_t virt_block, * zeroing pre-existing data, we can issue the bio immediately. * Otherwise we use kcopyd to zero the data first. */ - if (!pool->zero_new_blocks) + if (!pool->pf.zero_new_blocks) process_prepared_mapping(m); else if (io_overwrites_block(pool, bio)) { + struct endio_hook *h = dm_get_mapinfo(bio)->ptr; + h->overwrite_mapping = m; m->bio = bio; save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio); - dm_get_mapinfo(bio)->ptr = m; remap_and_issue(tc, bio, data_block); } else { @@ -1081,7 +1152,8 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result) */ static void retry_on_resume(struct bio *bio) { - struct thin_c *tc = dm_get_mapinfo(bio)->ptr; + struct endio_hook *h = dm_get_mapinfo(bio)->ptr; + struct thin_c *tc = h->tc; struct pool *pool = tc->pool; unsigned long flags; @@ -1102,6 +1174,86 @@ static void no_space(struct cell *cell) retry_on_resume(bio); } +static void process_discard(struct thin_c *tc, struct bio *bio) +{ + int r; + struct pool *pool = tc->pool; + struct cell *cell, *cell2; + struct cell_key key, key2; + dm_block_t block = get_bio_block(tc, bio); + struct dm_thin_lookup_result lookup_result; + struct new_mapping *m; + + build_virtual_key(tc->td, block, &key); + if (bio_detain(tc->pool->prison, &key, bio, &cell)) + return; + + r = dm_thin_find_block(tc->td, block, 1, &lookup_result); + switch (r) { + case 0: + /* + * Check nobody is fiddling with this pool block. This can + * happen if someone's in the process of breaking sharing + * on this block. + */ + build_data_key(tc->td, lookup_result.block, &key2); + if (bio_detain(tc->pool->prison, &key2, bio, &cell2)) { + cell_release_singleton(cell, bio); + break; + } + + if (io_overlaps_block(pool, bio)) { + /* + * IO may still be going to the destination block. We must + * quiesce before we can do the removal. + */ + m = get_next_mapping(pool); + m->tc = tc; + m->pass_discard = (!lookup_result.shared) & pool->pf.discard_passdown; + m->virt_block = block; + m->data_block = lookup_result.block; + m->cell = cell; + m->cell2 = cell2; + m->err = 0; + m->bio = bio; + + if (!ds_add_work(&pool->all_io_ds, &m->list)) { + list_add(&m->list, &pool->prepared_discards); + wake_worker(pool); + } + } else { + /* + * This path is hit if people are ignoring + * limits->discard_granularity. It ignores any + * part of the discard that is in a subsequent + * block. + */ + sector_t offset = bio->bi_sector - (block << pool->block_shift); + unsigned remaining = (pool->sectors_per_block - offset) << 9; + bio->bi_size = min(bio->bi_size, remaining); + + cell_release_singleton(cell, bio); + cell_release_singleton(cell2, bio); + remap_and_issue(tc, bio, lookup_result.block); + } + break; + + case -ENODATA: + /* + * It isn't provisioned, just forget it. + */ + cell_release_singleton(cell, bio); + bio_endio(bio, 0); + break; + + default: + DMERR("discard: find block unexpectedly returned %d", r); + cell_release_singleton(cell, bio); + bio_io_error(bio); + break; + } +} + static void break_sharing(struct thin_c *tc, struct bio *bio, dm_block_t block, struct cell_key *key, struct dm_thin_lookup_result *lookup_result, @@ -1113,8 +1265,8 @@ static void break_sharing(struct thin_c *tc, struct bio *bio, dm_block_t block, r = alloc_data_block(tc, &data_block); switch (r) { case 0: - schedule_copy(tc, block, lookup_result->block, - data_block, cell, bio); + schedule_internal_copy(tc, block, lookup_result->block, + data_block, cell, bio); break; case -ENOSPC: @@ -1147,13 +1299,9 @@ static void process_shared_bio(struct thin_c *tc, struct bio *bio, if (bio_data_dir(bio) == WRITE) break_sharing(tc, bio, block, &key, lookup_result, cell); else { - struct endio_hook *h; - h = mempool_alloc(pool->endio_hook_pool, GFP_NOIO); + struct endio_hook *h = dm_get_mapinfo(bio)->ptr; - h->tc = tc; - h->entry = ds_inc(&pool->ds); - save_and_set_endio(bio, &h->saved_bi_end_io, shared_read_endio); - dm_get_mapinfo(bio)->ptr = h; + h->shared_read_entry = ds_inc(&pool->shared_read_ds); cell_release_singleton(cell, bio); remap_and_issue(tc, bio, lookup_result->block); @@ -1188,7 +1336,10 @@ static void provision_block(struct thin_c *tc, struct bio *bio, dm_block_t block r = alloc_data_block(tc, &data_block); switch (r) { case 0: - schedule_zero(tc, block, data_block, cell, bio); + if (tc->origin_dev) + schedule_external_copy(tc, block, data_block, cell, bio); + else + schedule_zero(tc, block, data_block, cell, bio); break; case -ENOSPC: @@ -1239,16 +1390,27 @@ static void process_bio(struct thin_c *tc, struct bio *bio) break; case -ENODATA: - provision_block(tc, bio, block, cell); + if (bio_data_dir(bio) == READ && tc->origin_dev) { + cell_release_singleton(cell, bio); + remap_to_origin_and_issue(tc, bio); + } else + provision_block(tc, bio, block, cell); break; default: DMERR("dm_thin_find_block() failed, error = %d", r); + cell_release_singleton(cell, bio); bio_io_error(bio); break; } } +static int need_commit_due_to_time(struct pool *pool) +{ + return jiffies < pool->last_commit_jiffies || + jiffies > pool->last_commit_jiffies + COMMIT_PERIOD; +} + static void process_deferred_bios(struct pool *pool) { unsigned long flags; @@ -1264,7 +1426,9 @@ static void process_deferred_bios(struct pool *pool) spin_unlock_irqrestore(&pool->lock, flags); while ((bio = bio_list_pop(&bios))) { - struct thin_c *tc = dm_get_mapinfo(bio)->ptr; + struct endio_hook *h = dm_get_mapinfo(bio)->ptr; + struct thin_c *tc = h->tc; + /* * If we've got no free new_mapping structs, and processing * this bio might require one, we pause until there are some @@ -1277,7 +1441,11 @@ static void process_deferred_bios(struct pool *pool) break; } - process_bio(tc, bio); + + if (bio->bi_rw & REQ_DISCARD) + process_discard(tc, bio); + else + process_bio(tc, bio); } /* @@ -1290,7 +1458,7 @@ static void process_deferred_bios(struct pool *pool) bio_list_init(&pool->deferred_flush_bios); spin_unlock_irqrestore(&pool->lock, flags); - if (bio_list_empty(&bios)) + if (bio_list_empty(&bios) && !need_commit_due_to_time(pool)) return; r = dm_pool_commit_metadata(pool->pmd); @@ -1301,6 +1469,7 @@ static void process_deferred_bios(struct pool *pool) bio_io_error(bio); return; } + pool->last_commit_jiffies = jiffies; while ((bio = bio_list_pop(&bios))) generic_make_request(bio); @@ -1310,10 +1479,22 @@ static void do_worker(struct work_struct *ws) { struct pool *pool = container_of(ws, struct pool, worker); - process_prepared_mappings(pool); + process_prepared(pool, &pool->prepared_mappings, process_prepared_mapping); + process_prepared(pool, &pool->prepared_discards, process_prepared_discard); process_deferred_bios(pool); } +/* + * We want to commit periodically so that not too much + * unwritten data builds up. + */ +static void do_waker(struct work_struct *ws) +{ + struct pool *pool = container_of(to_delayed_work(ws), struct pool, waker); + wake_worker(pool); + queue_delayed_work(pool->wq, &pool->waker, COMMIT_PERIOD); +} + /*----------------------------------------------------------------*/ /* @@ -1335,6 +1516,19 @@ static void thin_defer_bio(struct thin_c *tc, struct bio *bio) wake_worker(pool); } +static struct endio_hook *thin_hook_bio(struct thin_c *tc, struct bio *bio) +{ + struct pool *pool = tc->pool; + struct endio_hook *h = mempool_alloc(pool->endio_hook_pool, GFP_NOIO); + + h->tc = tc; + h->shared_read_entry = NULL; + h->all_io_entry = bio->bi_rw & REQ_DISCARD ? NULL : ds_inc(&pool->all_io_ds); + h->overwrite_mapping = NULL; + + return h; +} + /* * Non-blocking function called from the thin target's map function. */ @@ -1347,12 +1541,8 @@ static int thin_bio_map(struct dm_target *ti, struct bio *bio, struct dm_thin_device *td = tc->td; struct dm_thin_lookup_result result; - /* - * Save the thin context for easy access from the deferred bio later. - */ - map_context->ptr = tc; - - if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) { + map_context->ptr = thin_hook_bio(tc, bio); + if (bio->bi_rw & (REQ_DISCARD | REQ_FLUSH | REQ_FUA)) { thin_defer_bio(tc, bio); return DM_MAPIO_SUBMITTED; } @@ -1434,7 +1624,7 @@ static int bind_control_target(struct pool *pool, struct dm_target *ti) pool->ti = ti; pool->low_water_blocks = pt->low_water_blocks; - pool->zero_new_blocks = pt->zero_new_blocks; + pool->pf = pt->pf; return 0; } @@ -1448,6 +1638,14 @@ static void unbind_control_target(struct pool *pool, struct dm_target *ti) /*---------------------------------------------------------------- * Pool creation *--------------------------------------------------------------*/ +/* Initialize pool features. */ +static void pool_features_init(struct pool_features *pf) +{ + pf->zero_new_blocks = 1; + pf->discard_enabled = 1; + pf->discard_passdown = 1; +} + static void __pool_destroy(struct pool *pool) { __pool_table_remove(pool); @@ -1495,7 +1693,7 @@ static struct pool *pool_create(struct mapped_device *pool_md, pool->block_shift = ffs(block_size) - 1; pool->offset_mask = block_size - 1; pool->low_water_blocks = 0; - pool->zero_new_blocks = 1; + pool_features_init(&pool->pf); pool->prison = prison_create(PRISON_CELLS); if (!pool->prison) { *error = "Error creating pool's bio prison"; @@ -1523,14 +1721,17 @@ static struct pool *pool_create(struct mapped_device *pool_md, } INIT_WORK(&pool->worker, do_worker); + INIT_DELAYED_WORK(&pool->waker, do_waker); spin_lock_init(&pool->lock); bio_list_init(&pool->deferred_bios); bio_list_init(&pool->deferred_flush_bios); INIT_LIST_HEAD(&pool->prepared_mappings); + INIT_LIST_HEAD(&pool->prepared_discards); pool->low_water_triggered = 0; pool->no_free_space = 0; bio_list_init(&pool->retry_on_resume_list); - ds_init(&pool->ds); + ds_init(&pool->shared_read_ds); + ds_init(&pool->all_io_ds); pool->next_mapping = NULL; pool->mapping_pool = @@ -1549,6 +1750,7 @@ static struct pool *pool_create(struct mapped_device *pool_md, goto bad_endio_hook_pool; } pool->ref_count = 1; + pool->last_commit_jiffies = jiffies; pool->pool_md = pool_md; pool->md_dev = metadata_dev; __pool_table_insert(pool); @@ -1588,7 +1790,8 @@ static void __pool_dec(struct pool *pool) static struct pool *__pool_find(struct mapped_device *pool_md, struct block_device *metadata_dev, - unsigned long block_size, char **error) + unsigned long block_size, char **error, + int *created) { struct pool *pool = __pool_table_lookup_metadata_dev(metadata_dev); @@ -1604,8 +1807,10 @@ static struct pool *__pool_find(struct mapped_device *pool_md, return ERR_PTR(-EINVAL); __pool_inc(pool); - } else + } else { pool = pool_create(pool_md, metadata_dev, block_size, error); + *created = 1; + } } return pool; @@ -1629,10 +1834,6 @@ static void pool_dtr(struct dm_target *ti) mutex_unlock(&dm_thin_pool_table.mutex); } -struct pool_features { - unsigned zero_new_blocks:1; -}; - static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf, struct dm_target *ti) { @@ -1641,7 +1842,7 @@ static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf, const char *arg_name; static struct dm_arg _args[] = { - {0, 1, "Invalid number of pool feature arguments"}, + {0, 3, "Invalid number of pool feature arguments"}, }; /* @@ -1661,6 +1862,12 @@ static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf, if (!strcasecmp(arg_name, "skip_block_zeroing")) { pf->zero_new_blocks = 0; continue; + } else if (!strcasecmp(arg_name, "ignore_discard")) { + pf->discard_enabled = 0; + continue; + } else if (!strcasecmp(arg_name, "no_discard_passdown")) { + pf->discard_passdown = 0; + continue; } ti->error = "Unrecognised pool feature requested"; @@ -1678,10 +1885,12 @@ static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf, * * Optional feature arguments are: * skip_block_zeroing: skips the zeroing of newly-provisioned blocks. + * ignore_discard: disable discard + * no_discard_passdown: don't pass discards down to the data device */ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) { - int r; + int r, pool_created = 0; struct pool_c *pt; struct pool *pool; struct pool_features pf; @@ -1691,6 +1900,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) dm_block_t low_water_blocks; struct dm_dev *metadata_dev; sector_t metadata_dev_size; + char b[BDEVNAME_SIZE]; /* * FIXME Remove validation from scope of lock. @@ -1712,11 +1922,9 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) } metadata_dev_size = i_size_read(metadata_dev->bdev->bd_inode) >> SECTOR_SHIFT; - if (metadata_dev_size > METADATA_DEV_MAX_SECTORS) { - ti->error = "Metadata device is too large"; - r = -EINVAL; - goto out_metadata; - } + if (metadata_dev_size > THIN_METADATA_MAX_SECTORS_WARNING) + DMWARN("Metadata device %s is larger than %u sectors: excess space will not be used.", + bdevname(metadata_dev->bdev, b), THIN_METADATA_MAX_SECTORS); r = dm_get_device(ti, argv[1], FMODE_READ | FMODE_WRITE, &data_dev); if (r) { @@ -1742,8 +1950,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) /* * Set default pool features. */ - memset(&pf, 0, sizeof(pf)); - pf.zero_new_blocks = 1; + pool_features_init(&pf); dm_consume_args(&as, 4); r = parse_pool_features(&as, &pf, ti); @@ -1757,20 +1964,58 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) } pool = __pool_find(dm_table_get_md(ti->table), metadata_dev->bdev, - block_size, &ti->error); + block_size, &ti->error, &pool_created); if (IS_ERR(pool)) { r = PTR_ERR(pool); goto out_free_pt; } + /* + * 'pool_created' reflects whether this is the first table load. + * Top level discard support is not allowed to be changed after + * initial load. This would require a pool reload to trigger thin + * device changes. + */ + if (!pool_created && pf.discard_enabled != pool->pf.discard_enabled) { + ti->error = "Discard support cannot be disabled once enabled"; + r = -EINVAL; + goto out_flags_changed; + } + + /* + * If discard_passdown was enabled verify that the data device + * supports discards. Disable discard_passdown if not; otherwise + * -EOPNOTSUPP will be returned. + */ + if (pf.discard_passdown) { + struct request_queue *q = bdev_get_queue(data_dev->bdev); + if (!q || !blk_queue_discard(q)) { + DMWARN("Discard unsupported by data device: Disabling discard passdown."); + pf.discard_passdown = 0; + } + } + pt->pool = pool; pt->ti = ti; pt->metadata_dev = metadata_dev; pt->data_dev = data_dev; pt->low_water_blocks = low_water_blocks; - pt->zero_new_blocks = pf.zero_new_blocks; + pt->pf = pf; ti->num_flush_requests = 1; - ti->num_discard_requests = 0; + /* + * Only need to enable discards if the pool should pass + * them down to the data device. The thin device's discard + * processing will cause mappings to be removed from the btree. + */ + if (pf.discard_enabled && pf.discard_passdown) { + ti->num_discard_requests = 1; + /* + * Setting 'discards_supported' circumvents the normal + * stacking of discard limits (this keeps the pool and + * thin devices' discard limits consistent). + */ + ti->discards_supported = 1; + } ti->private = pt; pt->callbacks.congested_fn = pool_is_congested; @@ -1780,6 +2025,8 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) return 0; +out_flags_changed: + __pool_dec(pool); out_free_pt: kfree(pt); out: @@ -1878,7 +2125,7 @@ static void pool_resume(struct dm_target *ti) __requeue_bios(pool); spin_unlock_irqrestore(&pool->lock, flags); - wake_worker(pool); + do_waker(&pool->waker.work); } static void pool_postsuspend(struct dm_target *ti) @@ -1887,6 +2134,7 @@ static void pool_postsuspend(struct dm_target *ti) struct pool_c *pt = ti->private; struct pool *pool = pt->pool; + cancel_delayed_work(&pool->waker); flush_workqueue(pool->wq); r = dm_pool_commit_metadata(pool->pmd); @@ -2067,7 +2315,7 @@ static int pool_message(struct dm_target *ti, unsigned argc, char **argv) static int pool_status(struct dm_target *ti, status_type_t type, char *result, unsigned maxlen) { - int r; + int r, count; unsigned sz = 0; uint64_t transaction_id; dm_block_t nr_free_blocks_data; @@ -2130,10 +2378,19 @@ static int pool_status(struct dm_target *ti, status_type_t type, (unsigned long)pool->sectors_per_block, (unsigned long long)pt->low_water_blocks); - DMEMIT("%u ", !pool->zero_new_blocks); + count = !pool->pf.zero_new_blocks + !pool->pf.discard_enabled + + !pool->pf.discard_passdown; + DMEMIT("%u ", count); - if (!pool->zero_new_blocks) + if (!pool->pf.zero_new_blocks) DMEMIT("skip_block_zeroing "); + + if (!pool->pf.discard_enabled) + DMEMIT("ignore_discard "); + + if (!pool->pf.discard_passdown) + DMEMIT("no_discard_passdown "); + break; } @@ -2162,6 +2419,21 @@ static int pool_merge(struct dm_target *ti, struct bvec_merge_data *bvm, return min(max_size, q->merge_bvec_fn(q, bvm, biovec)); } +static void set_discard_limits(struct pool *pool, struct queue_limits *limits) +{ + /* + * FIXME: these limits may be incompatible with the pool's data device + */ + limits->max_discard_sectors = pool->sectors_per_block; + + /* + * This is just a hint, and not enforced. We have to cope with + * bios that overlap 2 blocks. + */ + limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT; + limits->discard_zeroes_data = pool->pf.zero_new_blocks; +} + static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) { struct pool_c *pt = ti->private; @@ -2169,13 +2441,15 @@ static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits) blk_limits_io_min(limits, 0); blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT); + if (pool->pf.discard_enabled) + set_discard_limits(pool, limits); } static struct target_type pool_target = { .name = "thin-pool", .features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE | DM_TARGET_IMMUTABLE, - .version = {1, 0, 0}, + .version = {1, 1, 0}, .module = THIS_MODULE, .ctr = pool_ctr, .dtr = pool_dtr, @@ -2202,6 +2476,8 @@ static void thin_dtr(struct dm_target *ti) __pool_dec(tc->pool); dm_pool_close_thin_device(tc->td); dm_put_device(ti, tc->pool_dev); + if (tc->origin_dev) + dm_put_device(ti, tc->origin_dev); kfree(tc); mutex_unlock(&dm_thin_pool_table.mutex); @@ -2210,21 +2486,25 @@ static void thin_dtr(struct dm_target *ti) /* * Thin target parameters: * - * <pool_dev> <dev_id> + * <pool_dev> <dev_id> [origin_dev] * * pool_dev: the path to the pool (eg, /dev/mapper/my_pool) * dev_id: the internal device identifier + * origin_dev: a device external to the pool that should act as the origin + * + * If the pool device has discards disabled, they get disabled for the thin + * device as well. */ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) { int r; struct thin_c *tc; - struct dm_dev *pool_dev; + struct dm_dev *pool_dev, *origin_dev; struct mapped_device *pool_md; mutex_lock(&dm_thin_pool_table.mutex); - if (argc != 2) { + if (argc != 2 && argc != 3) { ti->error = "Invalid argument count"; r = -EINVAL; goto out_unlock; @@ -2237,6 +2517,15 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) goto out_unlock; } + if (argc == 3) { + r = dm_get_device(ti, argv[2], FMODE_READ, &origin_dev); + if (r) { + ti->error = "Error opening origin device"; + goto bad_origin_dev; + } + tc->origin_dev = origin_dev; + } + r = dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), &pool_dev); if (r) { ti->error = "Error opening pool device"; @@ -2273,8 +2562,12 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) ti->split_io = tc->pool->sectors_per_block; ti->num_flush_requests = 1; - ti->num_discard_requests = 0; - ti->discards_supported = 0; + + /* In case the pool supports discards, pass them on. */ + if (tc->pool->pf.discard_enabled) { + ti->discards_supported = 1; + ti->num_discard_requests = 1; + } dm_put(pool_md); @@ -2289,6 +2582,9 @@ bad_pool_lookup: bad_common: dm_put_device(ti, tc->pool_dev); bad_pool_dev: + if (tc->origin_dev) + dm_put_device(ti, tc->origin_dev); +bad_origin_dev: kfree(tc); out_unlock: mutex_unlock(&dm_thin_pool_table.mutex); @@ -2299,11 +2595,46 @@ out_unlock: static int thin_map(struct dm_target *ti, struct bio *bio, union map_info *map_context) { - bio->bi_sector -= ti->begin; + bio->bi_sector = dm_target_offset(ti, bio->bi_sector); return thin_bio_map(ti, bio, map_context); } +static int thin_endio(struct dm_target *ti, + struct bio *bio, int err, + union map_info *map_context) +{ + unsigned long flags; + struct endio_hook *h = map_context->ptr; + struct list_head work; + struct new_mapping *m, *tmp; + struct pool *pool = h->tc->pool; + + if (h->shared_read_entry) { + INIT_LIST_HEAD(&work); + ds_dec(h->shared_read_entry, &work); + + spin_lock_irqsave(&pool->lock, flags); + list_for_each_entry_safe(m, tmp, &work, list) { + list_del(&m->list); + m->quiesced = 1; + __maybe_add_mapping(m); + } + spin_unlock_irqrestore(&pool->lock, flags); + } + + if (h->all_io_entry) { + INIT_LIST_HEAD(&work); + ds_dec(h->all_io_entry, &work); + list_for_each_entry_safe(m, tmp, &work, list) + list_add(&m->list, &pool->prepared_discards); + } + + mempool_free(h, pool->endio_hook_pool); + + return 0; +} + static void thin_postsuspend(struct dm_target *ti) { if (dm_noflush_suspending(ti)) @@ -2347,6 +2678,8 @@ static int thin_status(struct dm_target *ti, status_type_t type, DMEMIT("%s %lu", format_dev_t(buf, tc->pool_dev->bdev->bd_dev), (unsigned long) tc->dev_id); + if (tc->origin_dev) + DMEMIT(" %s", format_dev_t(buf, tc->origin_dev->bdev->bd_dev)); break; } } @@ -2377,18 +2710,21 @@ static int thin_iterate_devices(struct dm_target *ti, static void thin_io_hints(struct dm_target *ti, struct queue_limits *limits) { struct thin_c *tc = ti->private; + struct pool *pool = tc->pool; blk_limits_io_min(limits, 0); - blk_limits_io_opt(limits, tc->pool->sectors_per_block << SECTOR_SHIFT); + blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT); + set_discard_limits(pool, limits); } static struct target_type thin_target = { .name = "thin", - .version = {1, 0, 0}, + .version = {1, 1, 0}, .module = THIS_MODULE, .ctr = thin_ctr, .dtr = thin_dtr, .map = thin_map, + .end_io = thin_endio, .postsuspend = thin_postsuspend, .status = thin_status, .iterate_devices = thin_iterate_devices, diff --git a/drivers/md/dm-verity.c b/drivers/md/dm-verity.c new file mode 100644 index 0000000..fa365d3 --- /dev/null +++ b/drivers/md/dm-verity.c @@ -0,0 +1,913 @@ +/* + * Copyright (C) 2012 Red Hat, Inc. + * + * Author: Mikulas Patocka <mpatocka@redhat.com> + * + * Based on Chromium dm-verity driver (C) 2011 The Chromium OS Authors + * + * This file is released under the GPLv2. + * + * In the file "/sys/module/dm_verity/parameters/prefetch_cluster" you can set + * default prefetch value. Data are read in "prefetch_cluster" chunks from the + * hash device. Setting this greatly improves performance when data and hash + * are on the same disk on different partitions on devices with poor random + * access behavior. + */ + +#include "dm-bufio.h" + +#include <linux/module.h> +#include <linux/device-mapper.h> +#include <crypto/hash.h> + +#define DM_MSG_PREFIX "verity" + +#define DM_VERITY_IO_VEC_INLINE 16 +#define DM_VERITY_MEMPOOL_SIZE 4 +#define DM_VERITY_DEFAULT_PREFETCH_SIZE 262144 + +#define DM_VERITY_MAX_LEVELS 63 + +static unsigned dm_verity_prefetch_cluster = DM_VERITY_DEFAULT_PREFETCH_SIZE; + +module_param_named(prefetch_cluster, dm_verity_prefetch_cluster, uint, S_IRUGO | S_IWUSR); + +struct dm_verity { + struct dm_dev *data_dev; + struct dm_dev *hash_dev; + struct dm_target *ti; + struct dm_bufio_client *bufio; + char *alg_name; + struct crypto_shash *tfm; + u8 *root_digest; /* digest of the root block */ + u8 *salt; /* salt: its size is salt_size */ + unsigned salt_size; + sector_t data_start; /* data offset in 512-byte sectors */ + sector_t hash_start; /* hash start in blocks */ + sector_t data_blocks; /* the number of data blocks */ + sector_t hash_blocks; /* the number of hash blocks */ + unsigned char data_dev_block_bits; /* log2(data blocksize) */ + unsigned char hash_dev_block_bits; /* log2(hash blocksize) */ + unsigned char hash_per_block_bits; /* log2(hashes in hash block) */ + unsigned char levels; /* the number of tree levels */ + unsigned char version; + unsigned digest_size; /* digest size for the current hash algorithm */ + unsigned shash_descsize;/* the size of temporary space for crypto */ + int hash_failed; /* set to 1 if hash of any block failed */ + + mempool_t *io_mempool; /* mempool of struct dm_verity_io */ + mempool_t *vec_mempool; /* mempool of bio vector */ + + struct workqueue_struct *verify_wq; + + /* starting blocks for each tree level. 0 is the lowest level. */ + sector_t hash_level_block[DM_VERITY_MAX_LEVELS]; +}; + +struct dm_verity_io { + struct dm_verity *v; + struct bio *bio; + + /* original values of bio->bi_end_io and bio->bi_private */ + bio_end_io_t *orig_bi_end_io; + void *orig_bi_private; + + sector_t block; + unsigned n_blocks; + + /* saved bio vector */ + struct bio_vec *io_vec; + unsigned io_vec_size; + + struct work_struct work; + + /* A space for short vectors; longer vectors are allocated separately. */ + struct bio_vec io_vec_inline[DM_VERITY_IO_VEC_INLINE]; + + /* + * Three variably-size fields follow this struct: + * + * u8 hash_desc[v->shash_descsize]; + * u8 real_digest[v->digest_size]; + * u8 want_digest[v->digest_size]; + * + * To access them use: io_hash_desc(), io_real_digest() and io_want_digest(). + */ +}; + +static struct shash_desc *io_hash_desc(struct dm_verity *v, struct dm_verity_io *io) +{ + return (struct shash_desc *)(io + 1); +} + +static u8 *io_real_digest(struct dm_verity *v, struct dm_verity_io *io) +{ + return (u8 *)(io + 1) + v->shash_descsize; +} + +static u8 *io_want_digest(struct dm_verity *v, struct dm_verity_io *io) +{ + return (u8 *)(io + 1) + v->shash_descsize + v->digest_size; +} + +/* + * Auxiliary structure appended to each dm-bufio buffer. If the value + * hash_verified is nonzero, hash of the block has been verified. + * + * The variable hash_verified is set to 0 when allocating the buffer, then + * it can be changed to 1 and it is never reset to 0 again. + * + * There is no lock around this value, a race condition can at worst cause + * that multiple processes verify the hash of the same buffer simultaneously + * and write 1 to hash_verified simultaneously. + * This condition is harmless, so we don't need locking. + */ +struct buffer_aux { + int hash_verified; +}; + +/* + * Initialize struct buffer_aux for a freshly created buffer. + */ +static void dm_bufio_alloc_callback(struct dm_buffer *buf) +{ + struct buffer_aux *aux = dm_bufio_get_aux_data(buf); + + aux->hash_verified = 0; +} + +/* + * Translate input sector number to the sector number on the target device. + */ +static sector_t verity_map_sector(struct dm_verity *v, sector_t bi_sector) +{ + return v->data_start + dm_target_offset(v->ti, bi_sector); +} + +/* + * Return hash position of a specified block at a specified tree level + * (0 is the lowest level). + * The lowest "hash_per_block_bits"-bits of the result denote hash position + * inside a hash block. The remaining bits denote location of the hash block. + */ +static sector_t verity_position_at_level(struct dm_verity *v, sector_t block, + int level) +{ + return block >> (level * v->hash_per_block_bits); +} + +static void verity_hash_at_level(struct dm_verity *v, sector_t block, int level, + sector_t *hash_block, unsigned *offset) +{ + sector_t position = verity_position_at_level(v, block, level); + unsigned idx; + + *hash_block = v->hash_level_block[level] + (position >> v->hash_per_block_bits); + + if (!offset) + return; + + idx = position & ((1 << v->hash_per_block_bits) - 1); + if (!v->version) + *offset = idx * v->digest_size; + else + *offset = idx << (v->hash_dev_block_bits - v->hash_per_block_bits); +} + +/* + * Verify hash of a metadata block pertaining to the specified data block + * ("block" argument) at a specified level ("level" argument). + * + * On successful return, io_want_digest(v, io) contains the hash value for + * a lower tree level or for the data block (if we're at the lowest leve). + * + * If "skip_unverified" is true, unverified buffer is skipped and 1 is returned. + * If "skip_unverified" is false, unverified buffer is hashed and verified + * against current value of io_want_digest(v, io). + */ +static int verity_verify_level(struct dm_verity_io *io, sector_t block, + int level, bool skip_unverified) +{ + struct dm_verity *v = io->v; + struct dm_buffer *buf; + struct buffer_aux *aux; + u8 *data; + int r; + sector_t hash_block; + unsigned offset; + + verity_hash_at_level(v, block, level, &hash_block, &offset); + + data = dm_bufio_read(v->bufio, hash_block, &buf); + if (unlikely(IS_ERR(data))) + return PTR_ERR(data); + + aux = dm_bufio_get_aux_data(buf); + + if (!aux->hash_verified) { + struct shash_desc *desc; + u8 *result; + + if (skip_unverified) { + r = 1; + goto release_ret_r; + } + + desc = io_hash_desc(v, io); + desc->tfm = v->tfm; + desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP; + r = crypto_shash_init(desc); + if (r < 0) { + DMERR("crypto_shash_init failed: %d", r); + goto release_ret_r; + } + + if (likely(v->version >= 1)) { + r = crypto_shash_update(desc, v->salt, v->salt_size); + if (r < 0) { + DMERR("crypto_shash_update failed: %d", r); + goto release_ret_r; + } + } + + r = crypto_shash_update(desc, data, 1 << v->hash_dev_block_bits); + if (r < 0) { + DMERR("crypto_shash_update failed: %d", r); + goto release_ret_r; + } + + if (!v->version) { + r = crypto_shash_update(desc, v->salt, v->salt_size); + if (r < 0) { + DMERR("crypto_shash_update failed: %d", r); + goto release_ret_r; + } + } + + result = io_real_digest(v, io); + r = crypto_shash_final(desc, result); + if (r < 0) { + DMERR("crypto_shash_final failed: %d", r); + goto release_ret_r; + } + if (unlikely(memcmp(result, io_want_digest(v, io), v->digest_size))) { + DMERR_LIMIT("metadata block %llu is corrupted", + (unsigned long long)hash_block); + v->hash_failed = 1; + r = -EIO; + goto release_ret_r; + } else + aux->hash_verified = 1; + } + + data += offset; + + memcpy(io_want_digest(v, io), data, v->digest_size); + + dm_bufio_release(buf); + return 0; + +release_ret_r: + dm_bufio_release(buf); + + return r; +} + +/* + * Verify one "dm_verity_io" structure. + */ +static int verity_verify_io(struct dm_verity_io *io) +{ + struct dm_verity *v = io->v; + unsigned b; + int i; + unsigned vector = 0, offset = 0; + + for (b = 0; b < io->n_blocks; b++) { + struct shash_desc *desc; + u8 *result; + int r; + unsigned todo; + + if (likely(v->levels)) { + /* + * First, we try to get the requested hash for + * the current block. If the hash block itself is + * verified, zero is returned. If it isn't, this + * function returns 0 and we fall back to whole + * chain verification. + */ + int r = verity_verify_level(io, io->block + b, 0, true); + if (likely(!r)) + goto test_block_hash; + if (r < 0) + return r; + } + + memcpy(io_want_digest(v, io), v->root_digest, v->digest_size); + + for (i = v->levels - 1; i >= 0; i--) { + int r = verity_verify_level(io, io->block + b, i, false); + if (unlikely(r)) + return r; + } + +test_block_hash: + desc = io_hash_desc(v, io); + desc->tfm = v->tfm; + desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP; + r = crypto_shash_init(desc); + if (r < 0) { + DMERR("crypto_shash_init failed: %d", r); + return r; + } + + if (likely(v->version >= 1)) { + r = crypto_shash_update(desc, v->salt, v->salt_size); + if (r < 0) { + DMERR("crypto_shash_update failed: %d", r); + return r; + } + } + + todo = 1 << v->data_dev_block_bits; + do { + struct bio_vec *bv; + u8 *page; + unsigned len; + + BUG_ON(vector >= io->io_vec_size); + bv = &io->io_vec[vector]; + page = kmap_atomic(bv->bv_page); + len = bv->bv_len - offset; + if (likely(len >= todo)) + len = todo; + r = crypto_shash_update(desc, + page + bv->bv_offset + offset, len); + kunmap_atomic(page); + if (r < 0) { + DMERR("crypto_shash_update failed: %d", r); + return r; + } + offset += len; + if (likely(offset == bv->bv_len)) { + offset = 0; + vector++; + } + todo -= len; + } while (todo); + + if (!v->version) { + r = crypto_shash_update(desc, v->salt, v->salt_size); + if (r < 0) { + DMERR("crypto_shash_update failed: %d", r); + return r; + } + } + + result = io_real_digest(v, io); + r = crypto_shash_final(desc, result); + if (r < 0) { + DMERR("crypto_shash_final failed: %d", r); + return r; + } + if (unlikely(memcmp(result, io_want_digest(v, io), v->digest_size))) { + DMERR_LIMIT("data block %llu is corrupted", + (unsigned long long)(io->block + b)); + v->hash_failed = 1; + return -EIO; + } + } + BUG_ON(vector != io->io_vec_size); + BUG_ON(offset); + + return 0; +} + +/* + * End one "io" structure with a given error. + */ +static void verity_finish_io(struct dm_verity_io *io, int error) +{ + struct bio *bio = io->bio; + struct dm_verity *v = io->v; + + bio->bi_end_io = io->orig_bi_end_io; + bio->bi_private = io->orig_bi_private; + + if (io->io_vec != io->io_vec_inline) + mempool_free(io->io_vec, v->vec_mempool); + + mempool_free(io, v->io_mempool); + + bio_endio(bio, error); +} + +static void verity_work(struct work_struct *w) +{ + struct dm_verity_io *io = container_of(w, struct dm_verity_io, work); + + verity_finish_io(io, verity_verify_io(io)); +} + +static void verity_end_io(struct bio *bio, int error) +{ + struct dm_verity_io *io = bio->bi_private; + + if (error) { + verity_finish_io(io, error); + return; + } + + INIT_WORK(&io->work, verity_work); + queue_work(io->v->verify_wq, &io->work); +} + +/* + * Prefetch buffers for the specified io. + * The root buffer is not prefetched, it is assumed that it will be cached + * all the time. + */ +static void verity_prefetch_io(struct dm_verity *v, struct dm_verity_io *io) +{ + int i; + + for (i = v->levels - 2; i >= 0; i--) { + sector_t hash_block_start; + sector_t hash_block_end; + verity_hash_at_level(v, io->block, i, &hash_block_start, NULL); + verity_hash_at_level(v, io->block + io->n_blocks - 1, i, &hash_block_end, NULL); + if (!i) { + unsigned cluster = *(volatile unsigned *)&dm_verity_prefetch_cluster; + + cluster >>= v->data_dev_block_bits; + if (unlikely(!cluster)) + goto no_prefetch_cluster; + + if (unlikely(cluster & (cluster - 1))) + cluster = 1 << (fls(cluster) - 1); + + hash_block_start &= ~(sector_t)(cluster - 1); + hash_block_end |= cluster - 1; + if (unlikely(hash_block_end >= v->hash_blocks)) + hash_block_end = v->hash_blocks - 1; + } +no_prefetch_cluster: + dm_bufio_prefetch(v->bufio, hash_block_start, + hash_block_end - hash_block_start + 1); + } +} + +/* + * Bio map function. It allocates dm_verity_io structure and bio vector and + * fills them. Then it issues prefetches and the I/O. + */ +static int verity_map(struct dm_target *ti, struct bio *bio, + union map_info *map_context) +{ + struct dm_verity *v = ti->private; + struct dm_verity_io *io; + + bio->bi_bdev = v->data_dev->bdev; + bio->bi_sector = verity_map_sector(v, bio->bi_sector); + + if (((unsigned)bio->bi_sector | bio_sectors(bio)) & + ((1 << (v->data_dev_block_bits - SECTOR_SHIFT)) - 1)) { + DMERR_LIMIT("unaligned io"); + return -EIO; + } + + if ((bio->bi_sector + bio_sectors(bio)) >> + (v->data_dev_block_bits - SECTOR_SHIFT) > v->data_blocks) { + DMERR_LIMIT("io out of range"); + return -EIO; + } + + if (bio_data_dir(bio) == WRITE) + return -EIO; + + io = mempool_alloc(v->io_mempool, GFP_NOIO); + io->v = v; + io->bio = bio; + io->orig_bi_end_io = bio->bi_end_io; + io->orig_bi_private = bio->bi_private; + io->block = bio->bi_sector >> (v->data_dev_block_bits - SECTOR_SHIFT); + io->n_blocks = bio->bi_size >> v->data_dev_block_bits; + + bio->bi_end_io = verity_end_io; + bio->bi_private = io; + io->io_vec_size = bio->bi_vcnt - bio->bi_idx; + if (io->io_vec_size < DM_VERITY_IO_VEC_INLINE) + io->io_vec = io->io_vec_inline; + else + io->io_vec = mempool_alloc(v->vec_mempool, GFP_NOIO); + memcpy(io->io_vec, bio_iovec(bio), + io->io_vec_size * sizeof(struct bio_vec)); + + verity_prefetch_io(v, io); + + generic_make_request(bio); + + return DM_MAPIO_SUBMITTED; +} + +/* + * Status: V (valid) or C (corruption found) + */ +static int verity_status(struct dm_target *ti, status_type_t type, + char *result, unsigned maxlen) +{ + struct dm_verity *v = ti->private; + unsigned sz = 0; + unsigned x; + + switch (type) { + case STATUSTYPE_INFO: + DMEMIT("%c", v->hash_failed ? 'C' : 'V'); + break; + case STATUSTYPE_TABLE: + DMEMIT("%u %s %s %u %u %llu %llu %s ", + v->version, + v->data_dev->name, + v->hash_dev->name, + 1 << v->data_dev_block_bits, + 1 << v->hash_dev_block_bits, + (unsigned long long)v->data_blocks, + (unsigned long long)v->hash_start, + v->alg_name + ); + for (x = 0; x < v->digest_size; x++) + DMEMIT("%02x", v->root_digest[x]); + DMEMIT(" "); + if (!v->salt_size) + DMEMIT("-"); + else + for (x = 0; x < v->salt_size; x++) + DMEMIT("%02x", v->salt[x]); + break; + } + + return 0; +} + +static int verity_ioctl(struct dm_target *ti, unsigned cmd, + unsigned long arg) +{ + struct dm_verity *v = ti->private; + int r = 0; + + if (v->data_start || + ti->len != i_size_read(v->data_dev->bdev->bd_inode) >> SECTOR_SHIFT) + r = scsi_verify_blk_ioctl(NULL, cmd); + + return r ? : __blkdev_driver_ioctl(v->data_dev->bdev, v->data_dev->mode, + cmd, arg); +} + +static int verity_merge(struct dm_target *ti, struct bvec_merge_data *bvm, + struct bio_vec *biovec, int max_size) +{ + struct dm_verity *v = ti->private; + struct request_queue *q = bdev_get_queue(v->data_dev->bdev); + + if (!q->merge_bvec_fn) + return max_size; + + bvm->bi_bdev = v->data_dev->bdev; + bvm->bi_sector = verity_map_sector(v, bvm->bi_sector); + + return min(max_size, q->merge_bvec_fn(q, bvm, biovec)); +} + +static int verity_iterate_devices(struct dm_target *ti, + iterate_devices_callout_fn fn, void *data) +{ + struct dm_verity *v = ti->private; + + return fn(ti, v->data_dev, v->data_start, ti->len, data); +} + +static void verity_io_hints(struct dm_target *ti, struct queue_limits *limits) +{ + struct dm_verity *v = ti->private; + + if (limits->logical_block_size < 1 << v->data_dev_block_bits) + limits->logical_block_size = 1 << v->data_dev_block_bits; + + if (limits->physical_block_size < 1 << v->data_dev_block_bits) + limits->physical_block_size = 1 << v->data_dev_block_bits; + + blk_limits_io_min(limits, limits->logical_block_size); +} + +static void verity_dtr(struct dm_target *ti) +{ + struct dm_verity *v = ti->private; + + if (v->verify_wq) + destroy_workqueue(v->verify_wq); + + if (v->vec_mempool) + mempool_destroy(v->vec_mempool); + + if (v->io_mempool) + mempool_destroy(v->io_mempool); + + if (v->bufio) + dm_bufio_client_destroy(v->bufio); + + kfree(v->salt); + kfree(v->root_digest); + + if (v->tfm) + crypto_free_shash(v->tfm); + + kfree(v->alg_name); + + if (v->hash_dev) + dm_put_device(ti, v->hash_dev); + + if (v->data_dev) + dm_put_device(ti, v->data_dev); + + kfree(v); +} + +/* + * Target parameters: + * <version> The current format is version 1. + * Vsn 0 is compatible with original Chromium OS releases. + * <data device> + * <hash device> + * <data block size> + * <hash block size> + * <the number of data blocks> + * <hash start block> + * <algorithm> + * <digest> + * <salt> Hex string or "-" if no salt. + */ +static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv) +{ + struct dm_verity *v; + unsigned num; + unsigned long long num_ll; + int r; + int i; + sector_t hash_position; + char dummy; + + v = kzalloc(sizeof(struct dm_verity), GFP_KERNEL); + if (!v) { + ti->error = "Cannot allocate verity structure"; + return -ENOMEM; + } + ti->private = v; + v->ti = ti; + + if ((dm_table_get_mode(ti->table) & ~FMODE_READ)) { + ti->error = "Device must be readonly"; + r = -EINVAL; + goto bad; + } + + if (argc != 10) { + ti->error = "Invalid argument count: exactly 10 arguments required"; + r = -EINVAL; + goto bad; + } + + if (sscanf(argv[0], "%d%c", &num, &dummy) != 1 || + num < 0 || num > 1) { + ti->error = "Invalid version"; + r = -EINVAL; + goto bad; + } + v->version = num; + + r = dm_get_device(ti, argv[1], FMODE_READ, &v->data_dev); + if (r) { + ti->error = "Data device lookup failed"; + goto bad; + } + + r = dm_get_device(ti, argv[2], FMODE_READ, &v->hash_dev); + if (r) { + ti->error = "Data device lookup failed"; + goto bad; + } + + if (sscanf(argv[3], "%u%c", &num, &dummy) != 1 || + !num || (num & (num - 1)) || + num < bdev_logical_block_size(v->data_dev->bdev) || + num > PAGE_SIZE) { + ti->error = "Invalid data device block size"; + r = -EINVAL; + goto bad; + } + v->data_dev_block_bits = ffs(num) - 1; + + if (sscanf(argv[4], "%u%c", &num, &dummy) != 1 || + !num || (num & (num - 1)) || + num < bdev_logical_block_size(v->hash_dev->bdev) || + num > INT_MAX) { + ti->error = "Invalid hash device block size"; + r = -EINVAL; + goto bad; + } + v->hash_dev_block_bits = ffs(num) - 1; + + if (sscanf(argv[5], "%llu%c", &num_ll, &dummy) != 1 || + num_ll << (v->data_dev_block_bits - SECTOR_SHIFT) != + (sector_t)num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) { + ti->error = "Invalid data blocks"; + r = -EINVAL; + goto bad; + } + v->data_blocks = num_ll; + + if (ti->len > (v->data_blocks << (v->data_dev_block_bits - SECTOR_SHIFT))) { + ti->error = "Data device is too small"; + r = -EINVAL; + goto bad; + } + + if (sscanf(argv[6], "%llu%c", &num_ll, &dummy) != 1 || + num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT) != + (sector_t)num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) { + ti->error = "Invalid hash start"; + r = -EINVAL; + goto bad; + } + v->hash_start = num_ll; + + v->alg_name = kstrdup(argv[7], GFP_KERNEL); + if (!v->alg_name) { + ti->error = "Cannot allocate algorithm name"; + r = -ENOMEM; + goto bad; + } + + v->tfm = crypto_alloc_shash(v->alg_name, 0, 0); + if (IS_ERR(v->tfm)) { + ti->error = "Cannot initialize hash function"; + r = PTR_ERR(v->tfm); + v->tfm = NULL; + goto bad; + } + v->digest_size = crypto_shash_digestsize(v->tfm); + if ((1 << v->hash_dev_block_bits) < v->digest_size * 2) { + ti->error = "Digest size too big"; + r = -EINVAL; + goto bad; + } + v->shash_descsize = + sizeof(struct shash_desc) + crypto_shash_descsize(v->tfm); + + v->root_digest = kmalloc(v->digest_size, GFP_KERNEL); + if (!v->root_digest) { + ti->error = "Cannot allocate root digest"; + r = -ENOMEM; + goto bad; + } + if (strlen(argv[8]) != v->digest_size * 2 || + hex2bin(v->root_digest, argv[8], v->digest_size)) { + ti->error = "Invalid root digest"; + r = -EINVAL; + goto bad; + } + + if (strcmp(argv[9], "-")) { + v->salt_size = strlen(argv[9]) / 2; + v->salt = kmalloc(v->salt_size, GFP_KERNEL); + if (!v->salt) { + ti->error = "Cannot allocate salt"; + r = -ENOMEM; + goto bad; + } + if (strlen(argv[9]) != v->salt_size * 2 || + hex2bin(v->salt, argv[9], v->salt_size)) { + ti->error = "Invalid salt"; + r = -EINVAL; + goto bad; + } + } + + v->hash_per_block_bits = + fls((1 << v->hash_dev_block_bits) / v->digest_size) - 1; + + v->levels = 0; + if (v->data_blocks) + while (v->hash_per_block_bits * v->levels < 64 && + (unsigned long long)(v->data_blocks - 1) >> + (v->hash_per_block_bits * v->levels)) + v->levels++; + + if (v->levels > DM_VERITY_MAX_LEVELS) { + ti->error = "Too many tree levels"; + r = -E2BIG; + goto bad; + } + + hash_position = v->hash_start; + for (i = v->levels - 1; i >= 0; i--) { + sector_t s; + v->hash_level_block[i] = hash_position; + s = verity_position_at_level(v, v->data_blocks, i); + s = (s >> v->hash_per_block_bits) + + !!(s & ((1 << v->hash_per_block_bits) - 1)); + if (hash_position + s < hash_position) { + ti->error = "Hash device offset overflow"; + r = -E2BIG; + goto bad; + } + hash_position += s; + } + v->hash_blocks = hash_position; + + v->bufio = dm_bufio_client_create(v->hash_dev->bdev, + 1 << v->hash_dev_block_bits, 1, sizeof(struct buffer_aux), + dm_bufio_alloc_callback, NULL); + if (IS_ERR(v->bufio)) { + ti->error = "Cannot initialize dm-bufio"; + r = PTR_ERR(v->bufio); + v->bufio = NULL; + goto bad; + } + + if (dm_bufio_get_device_size(v->bufio) < v->hash_blocks) { + ti->error = "Hash device is too small"; + r = -E2BIG; + goto bad; + } + + v->io_mempool = mempool_create_kmalloc_pool(DM_VERITY_MEMPOOL_SIZE, + sizeof(struct dm_verity_io) + v->shash_descsize + v->digest_size * 2); + if (!v->io_mempool) { + ti->error = "Cannot allocate io mempool"; + r = -ENOMEM; + goto bad; + } + + v->vec_mempool = mempool_create_kmalloc_pool(DM_VERITY_MEMPOOL_SIZE, + BIO_MAX_PAGES * sizeof(struct bio_vec)); + if (!v->vec_mempool) { + ti->error = "Cannot allocate vector mempool"; + r = -ENOMEM; + goto bad; + } + + /* WQ_UNBOUND greatly improves performance when running on ramdisk */ + v->verify_wq = alloc_workqueue("kverityd", WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND, num_online_cpus()); + if (!v->verify_wq) { + ti->error = "Cannot allocate workqueue"; + r = -ENOMEM; + goto bad; + } + + return 0; + +bad: + verity_dtr(ti); + + return r; +} + +static struct target_type verity_target = { + .name = "verity", + .version = {1, 0, 0}, + .module = THIS_MODULE, + .ctr = verity_ctr, + .dtr = verity_dtr, + .map = verity_map, + .status = verity_status, + .ioctl = verity_ioctl, + .merge = verity_merge, + .iterate_devices = verity_iterate_devices, + .io_hints = verity_io_hints, +}; + +static int __init dm_verity_init(void) +{ + int r; + + r = dm_register_target(&verity_target); + if (r < 0) + DMERR("register failed %d", r); + + return r; +} + +static void __exit dm_verity_exit(void) +{ + dm_unregister_target(&verity_target); +} + +module_init(dm_verity_init); +module_exit(dm_verity_exit); + +MODULE_AUTHOR("Mikulas Patocka <mpatocka@redhat.com>"); +MODULE_AUTHOR("Mandeep Baines <msb@chromium.org>"); +MODULE_AUTHOR("Will Drewry <wad@chromium.org>"); +MODULE_DESCRIPTION(DM_NAME " target for transparent disk integrity checking"); +MODULE_LICENSE("GPL"); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index b89c548..e24143c 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1016,6 +1016,7 @@ static void __map_bio(struct dm_target *ti, struct bio *clone, /* * Store bio_set for cleanup. */ + clone->bi_end_io = NULL; clone->bi_private = md->bs; bio_put(clone); free_tio(md, tio); diff --git a/drivers/md/persistent-data/dm-btree-internal.h b/drivers/md/persistent-data/dm-btree-internal.h index d279c76..5709bfe 100644 --- a/drivers/md/persistent-data/dm-btree-internal.h +++ b/drivers/md/persistent-data/dm-btree-internal.h @@ -108,12 +108,9 @@ static inline void *value_base(struct node *n) return &n->keys[le32_to_cpu(n->header.max_entries)]; } -/* - * FIXME: Now that value size is stored in node we don't need the third parm. - */ -static inline void *value_ptr(struct node *n, uint32_t index, size_t value_size) +static inline void *value_ptr(struct node *n, uint32_t index) { - BUG_ON(value_size != le32_to_cpu(n->header.value_size)); + uint32_t value_size = le32_to_cpu(n->header.value_size); return value_base(n) + (value_size * index); } diff --git a/drivers/md/persistent-data/dm-btree-remove.c b/drivers/md/persistent-data/dm-btree-remove.c index 023fbc2..aa71e23 100644 --- a/drivers/md/persistent-data/dm-btree-remove.c +++ b/drivers/md/persistent-data/dm-btree-remove.c @@ -61,20 +61,20 @@ static void node_shift(struct node *n, int shift) if (shift < 0) { shift = -shift; BUG_ON(shift > nr_entries); - BUG_ON((void *) key_ptr(n, shift) >= value_ptr(n, shift, value_size)); + BUG_ON((void *) key_ptr(n, shift) >= value_ptr(n, shift)); memmove(key_ptr(n, 0), key_ptr(n, shift), (nr_entries - shift) * sizeof(__le64)); - memmove(value_ptr(n, 0, value_size), - value_ptr(n, shift, value_size), + memmove(value_ptr(n, 0), + value_ptr(n, shift), (nr_entries - shift) * value_size); } else { BUG_ON(nr_entries + shift > le32_to_cpu(n->header.max_entries)); memmove(key_ptr(n, shift), key_ptr(n, 0), nr_entries * sizeof(__le64)); - memmove(value_ptr(n, shift, value_size), - value_ptr(n, 0, value_size), + memmove(value_ptr(n, shift), + value_ptr(n, 0), nr_entries * value_size); } } @@ -91,16 +91,16 @@ static void node_copy(struct node *left, struct node *right, int shift) memcpy(key_ptr(left, nr_left), key_ptr(right, 0), shift * sizeof(__le64)); - memcpy(value_ptr(left, nr_left, value_size), - value_ptr(right, 0, value_size), + memcpy(value_ptr(left, nr_left), + value_ptr(right, 0), shift * value_size); } else { BUG_ON(shift > le32_to_cpu(right->header.max_entries)); memcpy(key_ptr(right, 0), key_ptr(left, nr_left - shift), shift * sizeof(__le64)); - memcpy(value_ptr(right, 0, value_size), - value_ptr(left, nr_left - shift, value_size), + memcpy(value_ptr(right, 0), + value_ptr(left, nr_left - shift), shift * value_size); } } @@ -120,26 +120,17 @@ static void delete_at(struct node *n, unsigned index) key_ptr(n, index + 1), nr_to_copy * sizeof(__le64)); - memmove(value_ptr(n, index, value_size), - value_ptr(n, index + 1, value_size), + memmove(value_ptr(n, index), + value_ptr(n, index + 1), nr_to_copy * value_size); } n->header.nr_entries = cpu_to_le32(nr_entries - 1); } -static unsigned del_threshold(struct node *n) -{ - return le32_to_cpu(n->header.max_entries) / 3; -} - static unsigned merge_threshold(struct node *n) { - /* - * The extra one is because we know we're potentially going to - * delete an entry. - */ - return 2 * (le32_to_cpu(n->header.max_entries) / 3) + 1; + return le32_to_cpu(n->header.max_entries) / 3; } struct child { @@ -175,7 +166,7 @@ static int init_child(struct dm_btree_info *info, struct node *parent, if (inc) inc_children(info->tm, result->n, &le64_type); - *((__le64 *) value_ptr(parent, index, sizeof(__le64))) = + *((__le64 *) value_ptr(parent, index)) = cpu_to_le64(dm_block_location(result->block)); return 0; @@ -188,6 +179,15 @@ static int exit_child(struct dm_btree_info *info, struct child *c) static void shift(struct node *left, struct node *right, int count) { + uint32_t nr_left = le32_to_cpu(left->header.nr_entries); + uint32_t nr_right = le32_to_cpu(right->header.nr_entries); + uint32_t max_entries = le32_to_cpu(left->header.max_entries); + uint32_t r_max_entries = le32_to_cpu(right->header.max_entries); + + BUG_ON(max_entries != r_max_entries); + BUG_ON(nr_left - count > max_entries); + BUG_ON(nr_right + count > max_entries); + if (!count) return; @@ -199,13 +199,8 @@ static void shift(struct node *left, struct node *right, int count) node_shift(right, count); } - left->header.nr_entries = - cpu_to_le32(le32_to_cpu(left->header.nr_entries) - count); - BUG_ON(le32_to_cpu(left->header.nr_entries) > le32_to_cpu(left->header.max_entries)); - - right->header.nr_entries = - cpu_to_le32(le32_to_cpu(right->header.nr_entries) + count); - BUG_ON(le32_to_cpu(right->header.nr_entries) > le32_to_cpu(right->header.max_entries)); + left->header.nr_entries = cpu_to_le32(nr_left - count); + right->header.nr_entries = cpu_to_le32(nr_right + count); } static void __rebalance2(struct dm_btree_info *info, struct node *parent, @@ -215,8 +210,9 @@ static void __rebalance2(struct dm_btree_info *info, struct node *parent, struct node *right = r->n; uint32_t nr_left = le32_to_cpu(left->header.nr_entries); uint32_t nr_right = le32_to_cpu(right->header.nr_entries); + unsigned threshold = 2 * merge_threshold(left) + 1; - if (nr_left + nr_right <= merge_threshold(left)) { + if (nr_left + nr_right < threshold) { /* * Merge */ @@ -234,9 +230,6 @@ static void __rebalance2(struct dm_btree_info *info, struct node *parent, * Rebalance. */ unsigned target_left = (nr_left + nr_right) / 2; - unsigned shift_ = nr_left - target_left; - BUG_ON(le32_to_cpu(left->header.max_entries) <= nr_left - shift_); - BUG_ON(le32_to_cpu(right->header.max_entries) <= nr_right + shift_); shift(left, right, nr_left - target_left); *key_ptr(parent, r->index) = right->keys[0]; } @@ -272,6 +265,84 @@ static int rebalance2(struct shadow_spine *s, struct dm_btree_info *info, return exit_child(info, &right); } +/* + * We dump as many entries from center as possible into left, then the rest + * in right, then rebalance2. This wastes some cpu, but I want something + * simple atm. + */ +static void delete_center_node(struct dm_btree_info *info, struct node *parent, + struct child *l, struct child *c, struct child *r, + struct node *left, struct node *center, struct node *right, + uint32_t nr_left, uint32_t nr_center, uint32_t nr_right) +{ + uint32_t max_entries = le32_to_cpu(left->header.max_entries); + unsigned shift = min(max_entries - nr_left, nr_center); + + BUG_ON(nr_left + shift > max_entries); + node_copy(left, center, -shift); + left->header.nr_entries = cpu_to_le32(nr_left + shift); + + if (shift != nr_center) { + shift = nr_center - shift; + BUG_ON((nr_right + shift) > max_entries); + node_shift(right, shift); + node_copy(center, right, shift); + right->header.nr_entries = cpu_to_le32(nr_right + shift); + } + *key_ptr(parent, r->index) = right->keys[0]; + + delete_at(parent, c->index); + r->index--; + + dm_tm_dec(info->tm, dm_block_location(c->block)); + __rebalance2(info, parent, l, r); +} + +/* + * Redistributes entries among 3 sibling nodes. + */ +static void redistribute3(struct dm_btree_info *info, struct node *parent, + struct child *l, struct child *c, struct child *r, + struct node *left, struct node *center, struct node *right, + uint32_t nr_left, uint32_t nr_center, uint32_t nr_right) +{ + int s; + uint32_t max_entries = le32_to_cpu(left->header.max_entries); + unsigned target = (nr_left + nr_center + nr_right) / 3; + BUG_ON(target > max_entries); + + if (nr_left < nr_right) { + s = nr_left - target; + + if (s < 0 && nr_center < -s) { + /* not enough in central node */ + shift(left, center, nr_center); + s = nr_center - target; + shift(left, right, s); + nr_right += s; + } else + shift(left, center, s); + + shift(center, right, target - nr_right); + + } else { + s = target - nr_right; + if (s > 0 && nr_center < s) { + /* not enough in central node */ + shift(center, right, nr_center); + s = target - nr_center; + shift(left, right, s); + nr_left -= s; + } else + shift(center, right, s); + + shift(left, center, nr_left - target); + } + + *key_ptr(parent, c->index) = center->keys[0]; + *key_ptr(parent, r->index) = right->keys[0]; +} + static void __rebalance3(struct dm_btree_info *info, struct node *parent, struct child *l, struct child *c, struct child *r) { @@ -282,62 +353,18 @@ static void __rebalance3(struct dm_btree_info *info, struct node *parent, uint32_t nr_left = le32_to_cpu(left->header.nr_entries); uint32_t nr_center = le32_to_cpu(center->header.nr_entries); uint32_t nr_right = le32_to_cpu(right->header.nr_entries); - uint32_t max_entries = le32_to_cpu(left->header.max_entries); - unsigned target; + unsigned threshold = merge_threshold(left) * 4 + 1; BUG_ON(left->header.max_entries != center->header.max_entries); BUG_ON(center->header.max_entries != right->header.max_entries); - if (((nr_left + nr_center + nr_right) / 2) < merge_threshold(center)) { - /* - * Delete center node: - * - * We dump as many entries from center as possible into - * left, then the rest in right, then rebalance2. This - * wastes some cpu, but I want something simple atm. - */ - unsigned shift = min(max_entries - nr_left, nr_center); - - BUG_ON(nr_left + shift > max_entries); - node_copy(left, center, -shift); - left->header.nr_entries = cpu_to_le32(nr_left + shift); - - if (shift != nr_center) { - shift = nr_center - shift; - BUG_ON((nr_right + shift) >= max_entries); - node_shift(right, shift); - node_copy(center, right, shift); - right->header.nr_entries = cpu_to_le32(nr_right + shift); - } - *key_ptr(parent, r->index) = right->keys[0]; - - delete_at(parent, c->index); - r->index--; - - dm_tm_dec(info->tm, dm_block_location(c->block)); - __rebalance2(info, parent, l, r); - - return; - } - - /* - * Rebalance - */ - target = (nr_left + nr_center + nr_right) / 3; - BUG_ON(target > max_entries); - - /* - * Adjust the left node - */ - shift(left, center, nr_left - target); - - /* - * Adjust the right node - */ - shift(center, right, target - nr_right); - *key_ptr(parent, c->index) = center->keys[0]; - *key_ptr(parent, r->index) = right->keys[0]; + if ((nr_left + nr_center + nr_right) < threshold) + delete_center_node(info, parent, l, c, r, left, center, right, + nr_left, nr_center, nr_right); + else + redistribute3(info, parent, l, c, r, left, center, right, + nr_left, nr_center, nr_right); } static int rebalance3(struct shadow_spine *s, struct dm_btree_info *info, @@ -441,9 +468,6 @@ static int rebalance_children(struct shadow_spine *s, if (r) return r; - if (child_entries > del_threshold(n)) - return 0; - has_left_sibling = i > 0; has_right_sibling = i < (le32_to_cpu(n->header.nr_entries) - 1); @@ -496,7 +520,7 @@ static int remove_raw(struct shadow_spine *s, struct dm_btree_info *info, */ if (shadow_has_parent(s)) { __le64 location = cpu_to_le64(dm_block_location(shadow_current(s))); - memcpy(value_ptr(dm_block_data(shadow_parent(s)), i, sizeof(__le64)), + memcpy(value_ptr(dm_block_data(shadow_parent(s)), i), &location, sizeof(__le64)); } @@ -553,7 +577,7 @@ int dm_btree_remove(struct dm_btree_info *info, dm_block_t root, if (info->value_type.dec) info->value_type.dec(info->value_type.context, - value_ptr(n, index, info->value_type.size)); + value_ptr(n, index)); delete_at(n, index); } diff --git a/drivers/md/persistent-data/dm-btree.c b/drivers/md/persistent-data/dm-btree.c index bd1e7ff..d12b2cc 100644 --- a/drivers/md/persistent-data/dm-btree.c +++ b/drivers/md/persistent-data/dm-btree.c @@ -74,8 +74,7 @@ void inc_children(struct dm_transaction_manager *tm, struct node *n, dm_tm_inc(tm, value64(n, i)); else if (vt->inc) for (i = 0; i < nr_entries; i++) - vt->inc(vt->context, - value_ptr(n, i, vt->size)); + vt->inc(vt->context, value_ptr(n, i)); } static int insert_at(size_t value_size, struct node *node, unsigned index, @@ -281,7 +280,7 @@ int dm_btree_del(struct dm_btree_info *info, dm_block_t root) for (i = 0; i < f->nr_children; i++) info->value_type.dec(info->value_type.context, - value_ptr(f->n, i, info->value_type.size)); + value_ptr(f->n, i)); } f->current_child = f->nr_children; } @@ -320,7 +319,7 @@ static int btree_lookup_raw(struct ro_spine *s, dm_block_t block, uint64_t key, } while (!(flags & LEAF_NODE)); *result_key = le64_to_cpu(ro_node(s)->keys[i]); - memcpy(v, value_ptr(ro_node(s), i, value_size), value_size); + memcpy(v, value_ptr(ro_node(s), i), value_size); return 0; } @@ -432,7 +431,7 @@ static int btree_split_sibling(struct shadow_spine *s, dm_block_t root, size = le32_to_cpu(ln->header.flags) & INTERNAL_NODE ? sizeof(uint64_t) : s->info->value_type.size; - memcpy(value_ptr(rn, 0, size), value_ptr(ln, nr_left, size), + memcpy(value_ptr(rn, 0), value_ptr(ln, nr_left), size * nr_right); /* @@ -443,7 +442,7 @@ static int btree_split_sibling(struct shadow_spine *s, dm_block_t root, pn = dm_block_data(parent); location = cpu_to_le64(dm_block_location(left)); __dm_bless_for_disk(&location); - memcpy_disk(value_ptr(pn, parent_index, sizeof(__le64)), + memcpy_disk(value_ptr(pn, parent_index), &location, sizeof(__le64)); location = cpu_to_le64(dm_block_location(right)); @@ -529,8 +528,8 @@ static int btree_split_beneath(struct shadow_spine *s, uint64_t key) size = le32_to_cpu(pn->header.flags) & INTERNAL_NODE ? sizeof(__le64) : s->info->value_type.size; - memcpy(value_ptr(ln, 0, size), value_ptr(pn, 0, size), nr_left * size); - memcpy(value_ptr(rn, 0, size), value_ptr(pn, nr_left, size), + memcpy(value_ptr(ln, 0), value_ptr(pn, 0), nr_left * size); + memcpy(value_ptr(rn, 0), value_ptr(pn, nr_left), nr_right * size); /* new_parent should just point to l and r now */ @@ -545,12 +544,12 @@ static int btree_split_beneath(struct shadow_spine *s, uint64_t key) val = cpu_to_le64(dm_block_location(left)); __dm_bless_for_disk(&val); pn->keys[0] = ln->keys[0]; - memcpy_disk(value_ptr(pn, 0, sizeof(__le64)), &val, sizeof(__le64)); + memcpy_disk(value_ptr(pn, 0), &val, sizeof(__le64)); val = cpu_to_le64(dm_block_location(right)); __dm_bless_for_disk(&val); pn->keys[1] = rn->keys[0]; - memcpy_disk(value_ptr(pn, 1, sizeof(__le64)), &val, sizeof(__le64)); + memcpy_disk(value_ptr(pn, 1), &val, sizeof(__le64)); /* * rejig the spine. This is ugly, since it knows too @@ -595,7 +594,7 @@ static int btree_insert_raw(struct shadow_spine *s, dm_block_t root, __le64 location = cpu_to_le64(dm_block_location(shadow_current(s))); __dm_bless_for_disk(&location); - memcpy_disk(value_ptr(dm_block_data(shadow_parent(s)), i, sizeof(uint64_t)), + memcpy_disk(value_ptr(dm_block_data(shadow_parent(s)), i), &location, sizeof(__le64)); } @@ -710,12 +709,12 @@ static int insert(struct dm_btree_info *info, dm_block_t root, (!info->value_type.equal || !info->value_type.equal( info->value_type.context, - value_ptr(n, index, info->value_type.size), + value_ptr(n, index), value))) { info->value_type.dec(info->value_type.context, - value_ptr(n, index, info->value_type.size)); + value_ptr(n, index)); } - memcpy_disk(value_ptr(n, index, info->value_type.size), + memcpy_disk(value_ptr(n, index), value, info->value_type.size); } diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c index df2494c..ff3beed 100644 --- a/drivers/md/persistent-data/dm-space-map-common.c +++ b/drivers/md/persistent-data/dm-space-map-common.c @@ -405,8 +405,6 @@ int sm_ll_insert(struct ll_disk *ll, dm_block_t b, if (r < 0) return r; -#if 0 - /* FIXME: dm_btree_remove doesn't handle this yet */ if (old > 2) { r = dm_btree_remove(&ll->ref_count_info, ll->ref_count_root, @@ -414,7 +412,6 @@ int sm_ll_insert(struct ll_disk *ll, dm_block_t b, if (r) return r; } -#endif } else { __le32 le_rc = cpu_to_le32(ref_count); diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index e4b5c03..73970cd 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -29,7 +29,6 @@ #include <linux/ioctl.h> #include <linux/wait.h> #include <asm/uaccess.h> -#include <asm/system.h> #include "dmxdev.h" static int debug; diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c index 864b627..e24ec53 100644 --- a/drivers/media/dvb/firewire/firedtv-fw.c +++ b/drivers/media/dvb/firewire/firedtv-fw.c @@ -20,7 +20,6 @@ #include <linux/workqueue.h> #include <asm/page.h> -#include <asm/system.h> #include <dvb_demux.h> diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 6ecbcf6..4bd8bd5 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -53,7 +53,6 @@ #include <asm/unaligned.h> #include <asm/byteorder.h> -#include <asm/system.h> #include <linux/dvb/frontend.h> diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c index 421cf73..f6b52d5 100644 --- a/drivers/media/media-devnode.c +++ b/drivers/media/media-devnode.c @@ -40,7 +40,6 @@ #include <linux/string.h> #include <linux/types.h> #include <linux/uaccess.h> -#include <asm/system.h> #include <media/media-devnode.h> diff --git a/drivers/media/video/davinci/vpbe_osd.c b/drivers/media/video/davinci/vpbe_osd.c index d6488b7..bba299d 100644 --- a/drivers/media/video/davinci/vpbe_osd.c +++ b/drivers/media/video/davinci/vpbe_osd.c @@ -28,7 +28,6 @@ #include <linux/clk.h> #include <linux/slab.h> -#include <mach/io.h> #include <mach/cputype.h> #include <mach/hardware.h> diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/video/davinci/vpbe_venc.c index 00e80f5..b21ecc8 100644 --- a/drivers/media/video/davinci/vpbe_venc.c +++ b/drivers/media/video/davinci/vpbe_venc.c @@ -27,7 +27,6 @@ #include <mach/hardware.h> #include <mach/mux.h> -#include <mach/io.h> #include <mach/i2c.h> #include <linux/io.h> diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index f767df9..2e22002 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -54,7 +54,6 @@ #include <linux/mutex.h> #include <linux/slab.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <linux/dvb/video.h> diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index 7452277..93c35ef 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -286,7 +286,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb) sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0); sg_dma_len(sg) = new_size; - txd = ichan->dma_chan.device->device_prep_slave_sg( + txd = dmaengine_prep_slave_sg( &ichan->dma_chan, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); if (!txd) diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c index 4ed1c7c2..02194c0 100644 --- a/drivers/media/video/timblogiw.c +++ b/drivers/media/video/timblogiw.c @@ -564,7 +564,7 @@ static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) spin_unlock_irq(&fh->queue_lock); - desc = fh->chan->device->device_prep_slave_sg(fh->chan, + desc = dmaengine_prep_slave_sg(fh->chan, buf->sg, sg_elems, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP); if (!desc) { diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 5c6100f..1baec83 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -55,7 +55,6 @@ #include <linux/spi/spi.h> #endif #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <asm/io.h> #include <asm/div64.h> diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 041804b..70bec54 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -26,7 +26,6 @@ #include <linux/kmod.h> #include <linux/slab.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <media/v4l2-common.h> #include <media/v4l2-device.h> diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index c8ed7b6..1d31d72 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -57,7 +57,6 @@ #include <linux/scatterlist.h> #include <asm/dma.h> -#include <asm/system.h> #include <asm/io.h> #include <linux/atomic.h> diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 17dfe9b..87bd5ba 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -503,6 +503,101 @@ static void device_irq_exit(struct pm860x_chip *chip) free_irq(chip->core_irq, chip); } +int pm8606_osc_enable(struct pm860x_chip *chip, unsigned short client) +{ + int ret = -EIO; + struct i2c_client *i2c = (chip->id == CHIP_PM8606) ? + chip->client : chip->companion; + + dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client); + dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n", + __func__, chip->osc_vote, + chip->osc_status); + + mutex_lock(&chip->osc_lock); + /* Update voting status */ + chip->osc_vote |= client; + /* If reference group is off - turn on*/ + if (chip->osc_status != PM8606_REF_GP_OSC_ON) { + chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN; + /* Enable Reference group Vsys */ + if (pm860x_set_bits(i2c, PM8606_VSYS, + PM8606_VSYS_EN, PM8606_VSYS_EN)) + goto out; + + /*Enable Internal Oscillator */ + if (pm860x_set_bits(i2c, PM8606_MISC, + PM8606_MISC_OSC_EN, PM8606_MISC_OSC_EN)) + goto out; + /* Update status (only if writes succeed) */ + chip->osc_status = PM8606_REF_GP_OSC_ON; + } + mutex_unlock(&chip->osc_lock); + + dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n", + __func__, chip->osc_vote, + chip->osc_status, ret); + return 0; +out: + mutex_unlock(&chip->osc_lock); + return ret; +} +EXPORT_SYMBOL(pm8606_osc_enable); + +int pm8606_osc_disable(struct pm860x_chip *chip, unsigned short client) +{ + int ret = -EIO; + struct i2c_client *i2c = (chip->id == CHIP_PM8606) ? + chip->client : chip->companion; + + dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client); + dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n", + __func__, chip->osc_vote, + chip->osc_status); + + mutex_lock(&chip->osc_lock); + /*Update voting status */ + chip->osc_vote &= ~(client); + /* If reference group is off and this is the last client to release + * - turn off */ + if ((chip->osc_status != PM8606_REF_GP_OSC_OFF) && + (chip->osc_vote == REF_GP_NO_CLIENTS)) { + chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN; + /* Disable Reference group Vsys */ + if (pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0)) + goto out; + /* Disable Internal Oscillator */ + if (pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0)) + goto out; + chip->osc_status = PM8606_REF_GP_OSC_OFF; + } + mutex_unlock(&chip->osc_lock); + + dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n", + __func__, chip->osc_vote, + chip->osc_status, ret); + return 0; +out: + mutex_unlock(&chip->osc_lock); + return ret; +} +EXPORT_SYMBOL(pm8606_osc_disable); + +static void __devinit device_osc_init(struct i2c_client *i2c) +{ + struct pm860x_chip *chip = i2c_get_clientdata(i2c); + + mutex_init(&chip->osc_lock); + /* init portofino reference group voting and status */ + /* Disable Reference group Vsys */ + pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0); + /* Disable Internal Oscillator */ + pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0); + + chip->osc_vote = REF_GP_NO_CLIENTS; + chip->osc_status = PM8606_REF_GP_OSC_OFF; +} + static void __devinit device_bk_init(struct pm860x_chip *chip, struct pm860x_platform_data *pdata) { @@ -767,6 +862,15 @@ out: return; } +static void __devinit device_8606_init(struct pm860x_chip *chip, + struct i2c_client *i2c, + struct pm860x_platform_data *pdata) +{ + device_osc_init(i2c); + device_bk_init(chip, pdata); + device_led_init(chip, pdata); +} + int __devinit pm860x_device_init(struct pm860x_chip *chip, struct pm860x_platform_data *pdata) { @@ -774,8 +878,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip, switch (chip->id) { case CHIP_PM8606: - device_bk_init(chip, pdata); - device_led_init(chip, pdata); + device_8606_init(chip, chip->client, pdata); break; case CHIP_PM8607: device_8607_init(chip, chip->client, pdata); @@ -785,8 +888,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip, if (chip->companion) { switch (chip->id) { case CHIP_PM8607: - device_bk_init(chip, pdata); - device_led_init(chip, pdata); + device_8606_init(chip, chip->companion, pdata); break; case CHIP_PM8606: device_8607_init(chip, chip->companion, pdata); diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c index f93dd95..b2cfdc4 100644 --- a/drivers/mfd/88pm860x-i2c.c +++ b/drivers/mfd/88pm860x-i2c.c @@ -334,10 +334,35 @@ static int __devexit pm860x_remove(struct i2c_client *client) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct pm860x_chip *chip = i2c_get_clientdata(client); + + if (device_may_wakeup(dev) && chip->wakeup_flag) + enable_irq_wake(chip->core_irq); + return 0; +} + +static int pm860x_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct pm860x_chip *chip = i2c_get_clientdata(client); + + if (device_may_wakeup(dev) && chip->wakeup_flag) + disable_irq_wake(chip->core_irq); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_pm_ops, pm860x_suspend, pm860x_resume); + static struct i2c_driver pm860x_driver = { .driver = { .name = "88PM860x", .owner = THIS_MODULE, + .pm = &pm860x_pm_ops, }, .probe = pm860x_probe, .remove = __devexit_p(pm860x_remove), diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1489c35..29f463c 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -143,6 +143,21 @@ config TPS6507X This driver can also be built as a module. If so, the module will be called tps6507x. +config MFD_TPS65217 + tristate "TPS65217 Power Management / White LED chips" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65217 series of + Power Management / White LED chips. + These include voltage regulators, lithium ion/polymer battery + charger, wled and other features that are often used in portable + devices. + + This driver can also be built as a module. If so, the module + will be called tps65217. + config MFD_TPS6586X bool "TPS6586x Power Management chips" depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS @@ -162,6 +177,7 @@ config MFD_TPS65910 depends on I2C=y && GPIOLIB select MFD_CORE select GPIO_TPS65910 + select REGMAP_I2C help if you say yes here you get support for the TPS65910 series of Power Management chips. @@ -171,7 +187,7 @@ config MFD_TPS65912 depends on GPIOLIB config MFD_TPS65912_I2C - bool "TPS95612 Power Management chip with I2C" + bool "TPS65912 Power Management chip with I2C" select MFD_CORE select MFD_TPS65912 depends on I2C=y && GPIOLIB @@ -400,7 +416,7 @@ config MFD_MAX8997 depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE help - Say yes here to support for Maxim Semiconductor MAX8998/8966. + Say yes here to support for Maxim Semiconductor MAX8997/8966. This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, MUIC controls on chip. This driver provides common support for accessing the device; @@ -812,6 +828,18 @@ config MFD_PM8XXX_IRQ config TPS65911_COMPARATOR tristate +config MFD_TPS65090 + bool "TPS65090 Power Management chips" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65090 series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_AAT2870_CORE bool "Support for the AnalogicTech AAT2870" select MFD_CORE @@ -831,6 +859,28 @@ config MFD_INTEL_MSIC Passage) chip. This chip embeds audio, battery, GPIO, etc. devices used in Intel Medfield platforms. +config MFD_RC5T583 + bool "Ricoh RC5T583 Power Management system device" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + Select this option to get support for the RICOH583 Power + Management system device. + This driver provides common support for accessing the device + through i2c interface. The device supports multiple sub-devices + like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. + Additional drivers must be enabled in order to use the + different functionality of the device. + +config MFD_ANATOP + bool "Support for Freescale i.MX on-chip ANATOP controller" + depends on SOC_IMX6Q + help + Select this option to enable Freescale i.MX on-chip ANATOP + MFD controller. This controller embeds regulator and + thermal devices for Freescale i.MX platforms. + endmenu endif @@ -848,8 +898,9 @@ config MCP_SA11X0 # Chip drivers config MCP_UCB1200 - tristate "Support for UCB1200 / UCB1300" - depends on MCP + bool "Support for UCB1200 / UCB1300" + depends on MCP_SA11X0 + select MCP config MCP_UCB1200_TS tristate "Touchscreen interface support" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b953bab..05fa538 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o wm8994-regmap.o obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o +obj-$(CONFIG_MFD_TPS65217) += tps65217.o obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o tps65912-objs := tps65912-core.o tps65912-irq.o obj-$(CONFIG_MFD_TPS65912) += tps65912.o @@ -109,6 +110,9 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o +obj-$(CONFIG_MFD_TPS65090) += tps65090.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o +obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o +obj-$(CONFIG_MFD_ANATOP) += anatop-mfd.o diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index d295941..1f08704 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -32,6 +32,7 @@ #define AB8500_IT_SOURCE6_REG 0x05 #define AB8500_IT_SOURCE7_REG 0x06 #define AB8500_IT_SOURCE8_REG 0x07 +#define AB9540_IT_SOURCE13_REG 0x0C #define AB8500_IT_SOURCE19_REG 0x12 #define AB8500_IT_SOURCE20_REG 0x13 #define AB8500_IT_SOURCE21_REG 0x14 @@ -53,6 +54,7 @@ #define AB8500_IT_LATCH9_REG 0x28 #define AB8500_IT_LATCH10_REG 0x29 #define AB8500_IT_LATCH12_REG 0x2B +#define AB9540_IT_LATCH13_REG 0x2C #define AB8500_IT_LATCH19_REG 0x32 #define AB8500_IT_LATCH20_REG 0x33 #define AB8500_IT_LATCH21_REG 0x34 @@ -90,21 +92,39 @@ #define AB8500_IT_MASK24_REG 0x57 #define AB8500_REV_REG 0x80 +#define AB8500_IC_NAME_REG 0x82 #define AB8500_SWITCH_OFF_STATUS 0x00 #define AB8500_TURN_ON_STATUS 0x00 +#define AB9540_MODEM_CTRL2_REG 0x23 +#define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT BIT(2) + /* * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt - * numbers are indexed into this array with (num / 8). + * numbers are indexed into this array with (num / 8). The interupts are + * defined in linux/mfd/ab8500.h * * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at * offset 0. */ +/* AB8500 support */ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, }; +/* AB9540 support */ +static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = { + 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, +}; + +static const char ab8500_version_str[][7] = { + [AB8500_VERSION_AB8500] = "AB8500", + [AB8500_VERSION_AB8505] = "AB8505", + [AB8500_VERSION_AB9540] = "AB9540", + [AB8500_VERSION_AB8540] = "AB8540", +}; + static int ab8500_get_chip_id(struct device *dev) { struct ab8500 *ab8500; @@ -127,9 +147,7 @@ static int set_register_interruptible(struct ab8500 *ab8500, u8 bank, dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data); - ret = mutex_lock_interruptible(&ab8500->lock); - if (ret) - return ret; + mutex_lock(&ab8500->lock); ret = ab8500->write(ab8500, addr, data); if (ret < 0) @@ -156,9 +174,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank, * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; - ret = mutex_lock_interruptible(&ab8500->lock); - if (ret) - return ret; + mutex_lock(&ab8500->lock); ret = ab8500->read(ab8500, addr); if (ret < 0) @@ -185,31 +201,38 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank, u8 reg, u8 bitmask, u8 bitvalues) { int ret; - u8 data; /* put the u8 bank and u8 reg together into a an u16. * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; - ret = mutex_lock_interruptible(&ab8500->lock); - if (ret) - return ret; + mutex_lock(&ab8500->lock); - ret = ab8500->read(ab8500, addr); - if (ret < 0) { - dev_err(ab8500->dev, "failed to read reg %#x: %d\n", - addr, ret); - goto out; - } + if (ab8500->write_masked == NULL) { + u8 data; - data = (u8)ret; - data = (~bitmask & data) | (bitmask & bitvalues); + ret = ab8500->read(ab8500, addr); + if (ret < 0) { + dev_err(ab8500->dev, "failed to read reg %#x: %d\n", + addr, ret); + goto out; + } - ret = ab8500->write(ab8500, addr, data); - if (ret < 0) - dev_err(ab8500->dev, "failed to write reg %#x: %d\n", - addr, ret); + data = (u8)ret; + data = (~bitmask & data) | (bitmask & bitvalues); + + ret = ab8500->write(ab8500, addr, data); + if (ret < 0) + dev_err(ab8500->dev, "failed to write reg %#x: %d\n", + addr, ret); - dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, data); + dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, + data); + goto out; + } + ret = ab8500->write_masked(ab8500, addr, bitmask, bitvalues); + if (ret < 0) + dev_err(ab8500->dev, "failed to modify reg %#x: %d\n", addr, + ret); out: mutex_unlock(&ab8500->lock); return ret; @@ -248,7 +271,7 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); int i; - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { + for (i = 0; i < ab8500->mask_size; i++) { u8 old = ab8500->oldmask[i]; u8 new = ab8500->mask[i]; int reg; @@ -256,14 +279,17 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) if (new == old) continue; - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (ab8500_irq_regoffset[i] == 11 && - ab8500->chip_id < AB8500_CUT2P0) + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (ab8500->irq_reg_offset[i] == 11 && + is_ab8500_1p1_or_earlier(ab8500)) continue; ab8500->oldmask[i] = new; - reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i]; + reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i]; set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new); } @@ -306,13 +332,16 @@ static irqreturn_t ab8500_irq(int irq, void *dev) dev_vdbg(ab8500->dev, "interrupt\n"); - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { - int regoffset = ab8500_irq_regoffset[i]; + for (i = 0; i < ab8500->mask_size; i++) { + int regoffset = ab8500->irq_reg_offset[i]; int status; u8 value; - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (regoffset == 11 && ab8500->chip_id < AB8500_CUT2P0) + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500)) continue; status = get_register_interruptible(ab8500, AB8500_INTERRUPT, @@ -336,8 +365,16 @@ static int ab8500_irq_init(struct ab8500 *ab8500) { int base = ab8500->irq_base; int irq; + int num_irqs; + + if (is_ab9540(ab8500)) + num_irqs = AB9540_NR_IRQS; + else if (is_ab8505(ab8500)) + num_irqs = AB8505_NR_IRQS; + else + num_irqs = AB8500_NR_IRQS; - for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { + for (irq = base; irq < base + num_irqs; irq++) { irq_set_chip_data(irq, ab8500); irq_set_chip_and_handler(irq, &ab8500_irq_chip, handle_simple_irq); @@ -356,8 +393,16 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) { int base = ab8500->irq_base; int irq; + int num_irqs; - for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { + if (is_ab9540(ab8500)) + num_irqs = AB9540_NR_IRQS; + else if (is_ab8505(ab8500)) + num_irqs = AB8505_NR_IRQS; + else + num_irqs = AB8500_NR_IRQS; + + for (irq = base; irq < base + num_irqs; irq++) { #ifdef CONFIG_ARM set_irq_flags(irq, 0); #endif @@ -366,6 +411,7 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) } } +/* AB8500 GPIO Resources */ static struct resource __devinitdata ab8500_gpio_resources[] = { { .name = "GPIO_INT6", @@ -375,6 +421,28 @@ static struct resource __devinitdata ab8500_gpio_resources[] = { } }; +/* AB9540 GPIO Resources */ +static struct resource __devinitdata ab9540_gpio_resources[] = { + { + .name = "GPIO_INT6", + .start = AB8500_INT_GPIO6R, + .end = AB8500_INT_GPIO41F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "GPIO_INT14", + .start = AB9540_INT_GPIO50R, + .end = AB9540_INT_GPIO54R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "GPIO_INT15", + .start = AB9540_INT_GPIO50F, + .end = AB9540_INT_GPIO54F, + .flags = IORESOURCE_IRQ, + } +}; + static struct resource __devinitdata ab8500_gpadc_resources[] = { { .name = "HW_CONV_END", @@ -491,12 +559,6 @@ static struct resource __devinitdata ab8500_charger_resources[] = { .flags = IORESOURCE_IRQ, }, { - .name = "USB_CHARGE_DET_DONE", - .start = AB8500_INT_USB_CHG_DET_DONE, - .end = AB8500_INT_USB_CHG_DET_DONE, - .flags = IORESOURCE_IRQ, - }, - { .name = "VBUS_OVV", .start = AB8500_INT_VBUS_OVV, .end = AB8500_INT_VBUS_OVV, @@ -534,14 +596,8 @@ static struct resource __devinitdata ab8500_charger_resources[] = { }, { .name = "USB_CHARGER_NOT_OKR", - .start = AB8500_INT_USB_CHARGER_NOT_OK, - .end = AB8500_INT_USB_CHARGER_NOT_OK, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_CHARGER_NOT_OKF", - .start = AB8500_INT_USB_CHARGER_NOT_OKF, - .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .start = AB8500_INT_USB_CHARGER_NOT_OKR, + .end = AB8500_INT_USB_CHARGER_NOT_OKR, .flags = IORESOURCE_IRQ, }, { @@ -616,6 +672,12 @@ static struct resource __devinitdata ab8500_fg_resources[] = { .end = AB8500_INT_CC_INT_CALIB, .flags = IORESOURCE_IRQ, }, + { + .name = "CCEOC", + .start = AB8500_INT_CCEOC, + .end = AB8500_INT_CCEOC, + .flags = IORESOURCE_IRQ, + }, }; static struct resource __devinitdata ab8500_chargalg_resources[] = {}; @@ -630,8 +692,8 @@ static struct resource __devinitdata ab8500_debug_resources[] = { }, { .name = "IRQ_LAST", - .start = AB8500_INT_USB_CHARGER_NOT_OKF, - .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .start = AB8500_INT_XTAL32K_KO, + .end = AB8500_INT_XTAL32K_KO, .flags = IORESOURCE_IRQ, }, }; @@ -691,7 +753,7 @@ static struct resource __devinitdata ab8500_temp_resources[] = { }, }; -static struct mfd_cell __devinitdata ab8500_devs[] = { +static struct mfd_cell __devinitdata abx500_common_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -706,11 +768,6 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { .name = "ab8500-regulator", }, { - .name = "ab8500-gpio", - .num_resources = ARRAY_SIZE(ab8500_gpio_resources), - .resources = ab8500_gpio_resources, - }, - { .name = "ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), .resources = ab8500_gpadc_resources, @@ -748,11 +805,7 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { { .name = "ab8500-codec", }, - { - .name = "ab8500-usb", - .num_resources = ARRAY_SIZE(ab8500_usb_resources), - .resources = ab8500_usb_resources, - }, + { .name = "ab8500-poweron-key", .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), @@ -781,6 +834,32 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { }, }; +static struct mfd_cell __devinitdata ab8500_devs[] = { + { + .name = "ab8500-gpio", + .num_resources = ARRAY_SIZE(ab8500_gpio_resources), + .resources = ab8500_gpio_resources, + }, + { + .name = "ab8500-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, +}; + +static struct mfd_cell __devinitdata ab9540_devs[] = { + { + .name = "ab8500-gpio", + .num_resources = ARRAY_SIZE(ab9540_gpio_resources), + .resources = ab9540_gpio_resources, + }, + { + .name = "ab9540-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, +}; + static ssize_t show_chip_id(struct device *dev, struct device_attribute *attr, char *buf) { @@ -842,9 +921,64 @@ static ssize_t show_turn_on_status(struct device *dev, return sprintf(buf, "%#x\n", value); } +static ssize_t show_ab9540_dbbrstn(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ab8500 *ab8500; + int ret; + u8 value; + + ab8500 = dev_get_drvdata(dev); + + ret = get_register_interruptible(ab8500, AB8500_REGU_CTRL2, + AB9540_MODEM_CTRL2_REG, &value); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", + (value & AB9540_MODEM_CTRL2_SWDBBRSTN_BIT) ? 1 : 0); +} + +static ssize_t store_ab9540_dbbrstn(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct ab8500 *ab8500; + int ret = count; + int err; + u8 bitvalues; + + ab8500 = dev_get_drvdata(dev); + + if (count > 0) { + switch (buf[0]) { + case '0': + bitvalues = 0; + break; + case '1': + bitvalues = AB9540_MODEM_CTRL2_SWDBBRSTN_BIT; + break; + default: + goto exit; + } + + err = mask_and_set_register_interruptible(ab8500, + AB8500_REGU_CTRL2, AB9540_MODEM_CTRL2_REG, + AB9540_MODEM_CTRL2_SWDBBRSTN_BIT, bitvalues); + if (err) + dev_info(ab8500->dev, + "Failed to set DBBRSTN %c, err %#x\n", + buf[0], err); + } + +exit: + return ret; +} + static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL); static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL); static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL); +static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR, + show_ab9540_dbbrstn, store_ab9540_dbbrstn); static struct attribute *ab8500_sysfs_entries[] = { &dev_attr_chip_id.attr, @@ -853,11 +987,23 @@ static struct attribute *ab8500_sysfs_entries[] = { NULL, }; +static struct attribute *ab9540_sysfs_entries[] = { + &dev_attr_chip_id.attr, + &dev_attr_switch_off_status.attr, + &dev_attr_turn_on_status.attr, + &dev_attr_dbbrstn.attr, + NULL, +}; + static struct attribute_group ab8500_attr_group = { .attrs = ab8500_sysfs_entries, }; -int __devinit ab8500_init(struct ab8500 *ab8500) +static struct attribute_group ab9540_attr_group = { + .attrs = ab9540_sysfs_entries, +}; + +int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) { struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev); int ret; @@ -870,25 +1016,45 @@ int __devinit ab8500_init(struct ab8500 *ab8500) mutex_init(&ab8500->lock); mutex_init(&ab8500->irq_lock); + if (version != AB8500_VERSION_UNDEFINED) + ab8500->version = version; + else { + ret = get_register_interruptible(ab8500, AB8500_MISC, + AB8500_IC_NAME_REG, &value); + if (ret < 0) + return ret; + + ab8500->version = value; + } + ret = get_register_interruptible(ab8500, AB8500_MISC, AB8500_REV_REG, &value); if (ret < 0) return ret; - switch (value) { - case AB8500_CUT1P0: - case AB8500_CUT1P1: - case AB8500_CUT2P0: - case AB8500_CUT3P0: - case AB8500_CUT3P3: - dev_info(ab8500->dev, "detected chip, revision: %#x\n", value); - break; - default: - dev_err(ab8500->dev, "unknown chip, revision: %#x\n", value); - return -EINVAL; - } ab8500->chip_id = value; + dev_info(ab8500->dev, "detected chip, %s rev. %1x.%1x\n", + ab8500_version_str[ab8500->version], + ab8500->chip_id >> 4, + ab8500->chip_id & 0x0F); + + /* Configure AB8500 or AB9540 IRQ */ + if (is_ab9540(ab8500) || is_ab8505(ab8500)) { + ab8500->mask_size = AB9540_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab9540_irq_regoffset; + } else { + ab8500->mask_size = AB8500_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab8500_irq_regoffset; + } + ab8500->mask = kzalloc(ab8500->mask_size, GFP_KERNEL); + if (!ab8500->mask) + return -ENOMEM; + ab8500->oldmask = kzalloc(ab8500->mask_size, GFP_KERNEL); + if (!ab8500->oldmask) { + ret = -ENOMEM; + goto out_freemask; + } /* * ab8500 has switched off due to (SWITCH_OFF_STATUS): * 0x01 Swoff bit programming @@ -911,30 +1077,33 @@ int __devinit ab8500_init(struct ab8500 *ab8500) plat->init(ab8500); /* Clear and mask all interrupts */ - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (ab8500_irq_regoffset[i] == 11 && - ab8500->chip_id < AB8500_CUT2P0) + for (i = 0; i < ab8500->mask_size; i++) { + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (ab8500->irq_reg_offset[i] == 11 && + is_ab8500_1p1_or_earlier(ab8500)) continue; get_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_LATCH1_REG + ab8500_irq_regoffset[i], + AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i], &value); set_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i], 0xff); + AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i], 0xff); } ret = abx500_register_ops(ab8500->dev, &ab8500_ops); if (ret) - return ret; + goto out_freeoldmask; - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) + for (i = 0; i < ab8500->mask_size; i++) ab8500->mask[i] = ab8500->oldmask[i] = 0xff; if (ab8500->irq_base) { ret = ab8500_irq_init(ab8500); if (ret) - return ret; + goto out_freeoldmask; ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq, IRQF_ONESHOT | IRQF_NO_SUSPEND, @@ -943,17 +1112,34 @@ int __devinit ab8500_init(struct ab8500 *ab8500) goto out_removeirq; } - ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, - ARRAY_SIZE(ab8500_devs), NULL, + ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs, + ARRAY_SIZE(abx500_common_devs), NULL, ab8500->irq_base); + if (ret) goto out_freeirq; - ret = sysfs_create_group(&ab8500->dev->kobj, &ab8500_attr_group); + if (is_ab9540(ab8500)) + ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, + ARRAY_SIZE(ab9540_devs), NULL, + ab8500->irq_base); + else + ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, + ARRAY_SIZE(ab9540_devs), NULL, + ab8500->irq_base); if (ret) - dev_err(ab8500->dev, "error creating sysfs entries\n"); + goto out_freeirq; - return ret; + if (is_ab9540(ab8500)) + ret = sysfs_create_group(&ab8500->dev->kobj, + &ab9540_attr_group); + else + ret = sysfs_create_group(&ab8500->dev->kobj, + &ab8500_attr_group); + if (ret) + dev_err(ab8500->dev, "error creating sysfs entries\n"); + else + return ret; out_freeirq: if (ab8500->irq_base) @@ -961,18 +1147,27 @@ out_freeirq: out_removeirq: if (ab8500->irq_base) ab8500_irq_remove(ab8500); +out_freeoldmask: + kfree(ab8500->oldmask); +out_freemask: + kfree(ab8500->mask); return ret; } int __devexit ab8500_exit(struct ab8500 *ab8500) { - sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); + if (is_ab9540(ab8500)) + sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group); + else + sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); mfd_remove_devices(ab8500->dev); if (ab8500->irq_base) { free_irq(ab8500->irq, ab8500); ab8500_irq_remove(ab8500); } + kfree(ab8500->oldmask); + kfree(ab8500->mask); return 0; } diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c index 087fecd..b83045f 100644 --- a/drivers/mfd/ab8500-i2c.c +++ b/drivers/mfd/ab8500-i2c.c @@ -11,7 +11,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/mfd/abx500/ab8500.h> -#include <linux/mfd/db8500-prcmu.h> +#include <linux/mfd/dbx500-prcmu.h> static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) { @@ -23,6 +23,18 @@ static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) return ret; } +static int ab8500_i2c_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask, + u8 data) +{ + int ret; + + ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data, + &mask, 1); + if (ret < 0) + dev_err(ab8500->dev, "prcmu i2c error %d\n", ret); + return ret; +} + static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr) { int ret; @@ -38,6 +50,7 @@ static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr) static int __devinit ab8500_i2c_probe(struct platform_device *plf) { + const struct platform_device_id *platid = platform_get_device_id(plf); struct ab8500 *ab8500; struct resource *resource; int ret; @@ -58,13 +71,15 @@ static int __devinit ab8500_i2c_probe(struct platform_device *plf) ab8500->read = ab8500_i2c_read; ab8500->write = ab8500_i2c_write; + ab8500->write_masked = ab8500_i2c_write_masked; platform_set_drvdata(plf, ab8500); - ret = ab8500_init(ab8500); + ret = ab8500_init(ab8500, platid->driver_data); if (ret) kfree(ab8500); + return ret; } @@ -78,13 +93,22 @@ static int __devexit ab8500_i2c_remove(struct platform_device *plf) return 0; } +static const struct platform_device_id ab8500_id[] = { + { "ab8500-i2c", AB8500_VERSION_AB8500 }, + { "ab8505-i2c", AB8500_VERSION_AB8505 }, + { "ab9540-i2c", AB8500_VERSION_AB9540 }, + { "ab8540-i2c", AB8500_VERSION_AB8540 }, + { } +}; + static struct platform_driver ab8500_i2c_driver = { .driver = { .name = "ab8500-i2c", .owner = THIS_MODULE, }, .probe = ab8500_i2c_probe, - .remove = __devexit_p(ab8500_i2c_remove) + .remove = __devexit_p(ab8500_i2c_remove), + .id_table = ab8500_id, }; static int __init ab8500_i2c_init(void) diff --git a/drivers/mfd/anatop-mfd.c b/drivers/mfd/anatop-mfd.c new file mode 100644 index 0000000..2af4248 --- /dev/null +++ b/drivers/mfd/anatop-mfd.c @@ -0,0 +1,137 @@ +/* + * Anatop MFD driver + * + * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> + * Copyright (C) 2012 Linaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/mfd/anatop.h> + +u32 anatop_get_bits(struct anatop *adata, u32 addr, int bit_shift, + int bit_width) +{ + u32 val, mask; + + if (bit_width == 32) + mask = ~0; + else + mask = (1 << bit_width) - 1; + + val = readl(adata->ioreg + addr); + val = (val >> bit_shift) & mask; + + return val; +} +EXPORT_SYMBOL_GPL(anatop_get_bits); + +void anatop_set_bits(struct anatop *adata, u32 addr, int bit_shift, + int bit_width, u32 data) +{ + u32 val, mask; + + if (bit_width == 32) + mask = ~0; + else + mask = (1 << bit_width) - 1; + + spin_lock(&adata->reglock); + val = readl(adata->ioreg + addr) & ~(mask << bit_shift); + writel((data << bit_shift) | val, adata->ioreg + addr); + spin_unlock(&adata->reglock); +} +EXPORT_SYMBOL_GPL(anatop_set_bits); + +static const struct of_device_id of_anatop_match[] = { + { .compatible = "fsl,imx6q-anatop", }, + { }, +}; + +static int __devinit of_anatop_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + void *ioreg; + struct anatop *drvdata; + + ioreg = of_iomap(np, 0); + if (!ioreg) + return -EADDRNOTAVAIL; + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + drvdata->ioreg = ioreg; + spin_lock_init(&drvdata->reglock); + platform_set_drvdata(pdev, drvdata); + of_platform_populate(np, of_anatop_match, NULL, dev); + + return 0; +} + +static int __devexit of_anatop_remove(struct platform_device *pdev) +{ + struct anatop *drvdata; + drvdata = platform_get_drvdata(pdev); + iounmap(drvdata->ioreg); + + return 0; +} + +static struct platform_driver anatop_of_driver = { + .driver = { + .name = "anatop-mfd", + .owner = THIS_MODULE, + .of_match_table = of_anatop_match, + }, + .probe = of_anatop_probe, + .remove = of_anatop_remove, +}; + +static int __init anatop_init(void) +{ + return platform_driver_register(&anatop_of_driver); +} +postcore_initcall(anatop_init); + +static void __exit anatop_exit(void) +{ + platform_driver_unregister(&anatop_of_driver); +} +module_exit(anatop_exit); + +MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>"); +MODULE_DESCRIPTION("ANATOP MFD driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index b85bbd7..1895cf9 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -525,6 +525,11 @@ static void asic3_gpio_set(struct gpio_chip *chip, return; } +static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return (offset < ASIC3_NUM_GPIOS) ? IRQ_BOARD_START + offset : -ENXIO; +} + static __init int asic3_gpio_probe(struct platform_device *pdev, u16 *gpio_config, int num) { @@ -976,6 +981,7 @@ static int __init asic3_probe(struct platform_device *pdev) asic->gpio.set = asic3_gpio_set; asic->gpio.direction_input = asic3_gpio_direction_input; asic->gpio.direction_output = asic3_gpio_direction_output; + asic->gpio.to_irq = asic3_gpio_to_irq; ret = asic3_gpio_probe(pdev, pdata->gpio_config, diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index 5ddde2a..7ff313f 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -16,7 +16,6 @@ #include <linux/input.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/mutex.h> #include <linux/mfd/core.h> #include <linux/slab.h> #include <linux/module.h> @@ -647,8 +646,6 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id) struct irq_desc *desc; int ret; - mutex_init(&da9052->io_lock); - if (pdata && pdata->init != NULL) pdata->init(da9052); diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c index 44b97c7..36b88e3 100644 --- a/drivers/mfd/da9052-i2c.c +++ b/drivers/mfd/da9052-i2c.c @@ -74,24 +74,27 @@ static int __devinit da9052_i2c_probe(struct i2c_client *client, ret = da9052_i2c_enable_multiwrite(da9052); if (ret < 0) - goto err; + goto err_regmap; ret = da9052_device_init(da9052, id->driver_data); if (ret != 0) - goto err; + goto err_regmap; return 0; +err_regmap: + regmap_exit(da9052->regmap); err: kfree(da9052); return ret; } -static int da9052_i2c_remove(struct i2c_client *client) +static int __devexit da9052_i2c_remove(struct i2c_client *client) { struct da9052 *da9052 = i2c_get_clientdata(client); da9052_device_exit(da9052); + regmap_exit(da9052->regmap); kfree(da9052); return 0; @@ -107,7 +110,7 @@ static struct i2c_device_id da9052_i2c_id[] = { static struct i2c_driver da9052_i2c_driver = { .probe = da9052_i2c_probe, - .remove = da9052_i2c_remove, + .remove = __devexit_p(da9052_i2c_remove), .id_table = da9052_i2c_id, .driver = { .name = "da9052", diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c index cdbc7ca..6faf149 100644 --- a/drivers/mfd/da9052-spi.c +++ b/drivers/mfd/da9052-spi.c @@ -21,7 +21,7 @@ #include <linux/mfd/da9052/da9052.h> -static int da9052_spi_probe(struct spi_device *spi) +static int __devinit da9052_spi_probe(struct spi_device *spi) { int ret; const struct spi_device_id *id = spi_get_device_id(spi); @@ -52,20 +52,23 @@ static int da9052_spi_probe(struct spi_device *spi) ret = da9052_device_init(da9052, id->driver_data); if (ret != 0) - goto err; + goto err_regmap; return 0; +err_regmap: + regmap_exit(da9052->regmap); err: kfree(da9052); return ret; } -static int da9052_spi_remove(struct spi_device *spi) +static int __devexit da9052_spi_remove(struct spi_device *spi) { struct da9052 *da9052 = dev_get_drvdata(&spi->dev); da9052_device_exit(da9052); + regmap_exit(da9052->regmap); kfree(da9052); return 0; diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index af8e0ef..ebc1e86 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -30,6 +30,7 @@ #include <linux/mfd/dbx500-prcmu.h> #include <linux/regulator/db8500-prcmu.h> #include <linux/regulator/machine.h> +#include <asm/hardware/gic.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/db8500-regs.h> @@ -39,11 +40,6 @@ /* Offset for the firmware version within the TCPM */ #define PRCMU_FW_VERSION_OFFSET 0xA4 -/* PRCMU project numbers, defined by PRCMU FW */ -#define PRCMU_PROJECT_ID_8500V1_0 1 -#define PRCMU_PROJECT_ID_8500V2_0 2 -#define PRCMU_PROJECT_ID_8400V2_0 3 - /* Index of different voltages to be used when accessing AVSData */ #define PRCM_AVS_BASE 0x2FC #define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0) @@ -137,6 +133,8 @@ #define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0) #define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1) #define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4) +#define PLL_SOC0_OFF 0x1 +#define PLL_SOC0_ON 0x2 #define PLL_SOC1_OFF 0x4 #define PLL_SOC1_ON 0x8 @@ -266,6 +264,11 @@ #define WAKEUP_BIT_GPIO7 BIT(30) #define WAKEUP_BIT_GPIO8 BIT(31) +static struct { + bool valid; + struct prcmu_fw_version version; +} fw_info; + /* * This vector maps irq numbers to the bits in the bit field used in * communication with the PRCMU firmware. @@ -341,11 +344,13 @@ static struct { * mb1_transfer - state needed for mailbox 1 communication. * @lock: The transaction lock. * @work: The transaction completion structure. + * @ape_opp: The current APE OPP. * @ack: Reply ("acknowledge") data. */ static struct { struct mutex lock; struct completion work; + u8 ape_opp; struct { u8 header; u8 arm_opp; @@ -413,79 +418,102 @@ static struct { static atomic_t ac_wake_req_state = ATOMIC_INIT(0); /* Spinlocks */ +static DEFINE_SPINLOCK(prcmu_lock); static DEFINE_SPINLOCK(clkout_lock); -static DEFINE_SPINLOCK(gpiocr_lock); /* Global var to runtime determine TCDM base for v2 or v1 */ static __iomem void *tcdm_base; struct clk_mgt { - unsigned int offset; + void __iomem *reg; u32 pllsw; + int branch; + bool clk38div; +}; + +enum { + PLL_RAW, + PLL_FIX, + PLL_DIV }; static DEFINE_SPINLOCK(clk_mgt_lock); -#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 } +#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \ + { (PRCM_##_name##_MGT), 0 , _branch, _clk38div} struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { - CLK_MGT_ENTRY(SGACLK), - CLK_MGT_ENTRY(UARTCLK), - CLK_MGT_ENTRY(MSP02CLK), - CLK_MGT_ENTRY(MSP1CLK), - CLK_MGT_ENTRY(I2CCLK), - CLK_MGT_ENTRY(SDMMCCLK), - CLK_MGT_ENTRY(SLIMCLK), - CLK_MGT_ENTRY(PER1CLK), - CLK_MGT_ENTRY(PER2CLK), - CLK_MGT_ENTRY(PER3CLK), - CLK_MGT_ENTRY(PER5CLK), - CLK_MGT_ENTRY(PER6CLK), - CLK_MGT_ENTRY(PER7CLK), - CLK_MGT_ENTRY(LCDCLK), - CLK_MGT_ENTRY(BMLCLK), - CLK_MGT_ENTRY(HSITXCLK), - CLK_MGT_ENTRY(HSIRXCLK), - CLK_MGT_ENTRY(HDMICLK), - CLK_MGT_ENTRY(APEATCLK), - CLK_MGT_ENTRY(APETRACECLK), - CLK_MGT_ENTRY(MCDECLK), - CLK_MGT_ENTRY(IPI2CCLK), - CLK_MGT_ENTRY(DSIALTCLK), - CLK_MGT_ENTRY(DMACLK), - CLK_MGT_ENTRY(B2R2CLK), - CLK_MGT_ENTRY(TVCLK), - CLK_MGT_ENTRY(SSPCLK), - CLK_MGT_ENTRY(RNGCLK), - CLK_MGT_ENTRY(UICCCLK), + CLK_MGT_ENTRY(SGACLK, PLL_DIV, false), + CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true), + CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true), + CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true), + CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true), + CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true), + CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true), + CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true), + CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true), + CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false), + CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true), + CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true), + CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true), + CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true), + CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false), + CLK_MGT_ENTRY(DMACLK, PLL_DIV, true), + CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true), + CLK_MGT_ENTRY(TVCLK, PLL_FIX, true), + CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true), + CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true), + CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false), +}; + +struct dsiclk { + u32 divsel_mask; + u32 divsel_shift; + u32 divsel; +}; + +static struct dsiclk dsiclk[2] = { + { + .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK, + .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT, + .divsel = PRCM_DSI_PLLOUT_SEL_PHI, + }, + { + .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK, + .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT, + .divsel = PRCM_DSI_PLLOUT_SEL_PHI, + } }; -static struct regulator *hwacc_regulator[NUM_HW_ACC]; -static struct regulator *hwacc_ret_regulator[NUM_HW_ACC]; - -static bool hwacc_enabled[NUM_HW_ACC]; -static bool hwacc_ret_enabled[NUM_HW_ACC]; - -static const char *hwacc_regulator_name[NUM_HW_ACC] = { - [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp", - [HW_ACC_SVAPIPE] = "hwacc-sva-pipe", - [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp", - [HW_ACC_SIAPIPE] = "hwacc-sia-pipe", - [HW_ACC_SGA] = "hwacc-sga", - [HW_ACC_B2R2] = "hwacc-b2r2", - [HW_ACC_MCDE] = "hwacc-mcde", - [HW_ACC_ESRAM1] = "hwacc-esram1", - [HW_ACC_ESRAM2] = "hwacc-esram2", - [HW_ACC_ESRAM3] = "hwacc-esram3", - [HW_ACC_ESRAM4] = "hwacc-esram4", +struct dsiescclk { + u32 en; + u32 div_mask; + u32 div_shift; }; -static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { - [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret", - [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret", - [HW_ACC_ESRAM1] = "hwacc-esram1-ret", - [HW_ACC_ESRAM2] = "hwacc-esram2-ret", - [HW_ACC_ESRAM3] = "hwacc-esram3-ret", - [HW_ACC_ESRAM4] = "hwacc-esram4-ret", +static struct dsiescclk dsiescclk[3] = { + { + .en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT, + }, + { + .en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT, + }, + { + .en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT, + } }; /* @@ -503,9 +531,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { /* PLLDIV=12, PLLSW=4 (PLLDDR) */ #define PRCMU_DSI_CLOCK_SETTING 0x0000008C -/* PLLDIV=8, PLLSW=4 (PLLDDR) */ -#define PRCMU_DSI_CLOCK_SETTING_U8400 0x00000088 - /* DPI 50000000 Hz */ #define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \ (16 << PRCMU_CLK_PLL_DIV_SHIFT)) @@ -514,9 +539,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { /* D=101, N=1, R=4, SELDIV2=0 */ #define PRCMU_PLLDSI_FREQ_SETTING 0x00040165 -/* D=70, N=1, R=3, SELDIV2=0 */ -#define PRCMU_PLLDSI_FREQ_SETTING_U8400 0x00030146 - #define PRCMU_ENABLE_PLLDSI 0x00000001 #define PRCMU_DISABLE_PLLDSI 0x00000000 #define PRCMU_RELEASE_RESET_DSS 0x0000400C @@ -528,30 +550,17 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { #define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 -static struct { - u8 project_number; - u8 api_version; - u8 func_version; - u8 errata; -} prcmu_version; - - int db8500_prcmu_enable_dsipll(void) { int i; - unsigned int plldsifreq; /* Clear DSIPLL_RESETN */ writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR); /* Unclamp DSIPLL in/out */ writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR); - if (prcmu_is_u8400()) - plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400; - else - plldsifreq = PRCMU_PLLDSI_FREQ_SETTING; /* Set DSI PLL FREQ */ - writel(plldsifreq, PRCM_PLLDSI_FREQ); + writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ); writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL); /* Enable Escape clocks */ writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); @@ -583,12 +592,6 @@ int db8500_prcmu_disable_dsipll(void) int db8500_prcmu_set_display_clocks(void) { unsigned long flags; - unsigned int dsiclk; - - if (prcmu_is_u8400()) - dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400; - else - dsiclk = PRCMU_DSI_CLOCK_SETTING; spin_lock_irqsave(&clk_mgt_lock, flags); @@ -596,7 +599,7 @@ int db8500_prcmu_set_display_clocks(void) while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); - writel(dsiclk, PRCM_HDMICLK_MGT); + writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT); writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT); writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT); @@ -608,43 +611,41 @@ int db8500_prcmu_set_display_clocks(void) return 0; } -/** - * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. - */ -void prcmu_enable_spi2(void) +u32 db8500_prcmu_read(unsigned int reg) +{ + return readl(_PRCMU_BASE + reg); +} + +void db8500_prcmu_write(unsigned int reg, u32 value) { - u32 reg; unsigned long flags; - spin_lock_irqsave(&gpiocr_lock, flags); - reg = readl(PRCM_GPIOCR); - writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR); - spin_unlock_irqrestore(&gpiocr_lock, flags); + spin_lock_irqsave(&prcmu_lock, flags); + writel(value, (_PRCMU_BASE + reg)); + spin_unlock_irqrestore(&prcmu_lock, flags); } -/** - * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. - */ -void prcmu_disable_spi2(void) +void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value) { - u32 reg; + u32 val; unsigned long flags; - spin_lock_irqsave(&gpiocr_lock, flags); - reg = readl(PRCM_GPIOCR); - writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR); - spin_unlock_irqrestore(&gpiocr_lock, flags); + spin_lock_irqsave(&prcmu_lock, flags); + val = readl(_PRCMU_BASE + reg); + val = ((val & ~mask) | (value & mask)); + writel(val, (_PRCMU_BASE + reg)); + spin_unlock_irqrestore(&prcmu_lock, flags); } -bool prcmu_has_arm_maxopp(void) +struct prcmu_fw_version *prcmu_get_fw_version(void) { - return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & - PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK; + return fw_info.valid ? &fw_info.version : NULL; } -bool prcmu_is_u8400(void) +bool prcmu_has_arm_maxopp(void) { - return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0; + return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & + PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK; } /** @@ -787,6 +788,124 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) return 0; } +u8 db8500_prcmu_get_power_state_result(void) +{ + return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS); +} + +/* This function decouple the gic from the prcmu */ +int db8500_prcmu_gic_decouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 1 */ + writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, + PRCM_A9_MASK_REQ); + + /* Make sure the register is updated */ + readl(PRCM_A9_MASK_REQ); + + /* Wait a few cycles for the gic mask completion */ + udelay(1); + + return 0; +} + +/* This function recouple the gic with the prcmu */ +int db8500_prcmu_gic_recouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 0 */ + writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ); + + return 0; +} + +#define PRCMU_GIC_NUMBER_REGS 5 + +/* + * This function checks if there are pending irq on the gic. It only + * makes sense if the gic has been decoupled before with the + * db8500_prcmu_gic_decouple function. Disabling an interrupt only + * disables the forwarding of the interrupt to any CPU interface. It + * does not prevent the interrupt from changing state, for example + * becoming pending, or active and pending if it is already + * active. Hence, we have to check the interrupt is pending *and* is + * active. + */ +bool db8500_prcmu_gic_pending_irq(void) +{ + u32 pr; /* Pending register */ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* 5 registers. STI & PPI not skipped */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) { + + pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4); + er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + if (pr & er) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if there are pending interrupt on the + * prcmu which has been delegated to monitor the irqs with the + * db8500_prcmu_copy_gic_settings function. + */ +bool db8500_prcmu_pending_irq(void) +{ + u32 it, im; + int i; + + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + it = readl(PRCM_ARMITVAL31TO0 + i * 4); + im = readl(PRCM_ARMITMSK31TO0 + i * 4); + if (it & im) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if the specified cpu is in in WFI. It's usage + * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple + * function. Of course passing smp_processor_id() to this function will + * always return false... + */ +bool db8500_prcmu_is_cpu_in_wfi(int cpu) +{ + return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : + PRCM_ARM_WFI_STANDBY_WFI0; +} + +/* + * This function copies the gic SPI settings to the prcmu in order to + * monitor them and abort/finish the retention/off sequence or state. + */ +int db8500_prcmu_copy_gic_settings(void) +{ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* We skip the STI and PPI */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + er = readl_relaxed(dist_base + + GIC_DIST_ENABLE_SET + (i + 1) * 4); + writel(er, PRCM_ARMITMSK31TO0 + i * 4); + } + + return 0; +} + /* This function should only be called while mb0_transfer.lock is held. */ static void config_wakeups(void) { @@ -909,23 +1028,23 @@ int db8500_prcmu_get_arm_opp(void) } /** - * prcmu_get_ddr_opp - get the current DDR OPP + * db8500_prcmu_get_ddr_opp - get the current DDR OPP * * Returns: the current DDR OPP */ -int prcmu_get_ddr_opp(void) +int db8500_prcmu_get_ddr_opp(void) { return readb(PRCM_DDR_SUBSYS_APE_MINBW); } /** - * set_ddr_opp - set the appropriate DDR OPP + * db8500_set_ddr_opp - set the appropriate DDR OPP * @opp: The new DDR operating point to which transition is to be made * Returns: 0 on success, non-zero on failure * * This function sets the operating point of the DDR. */ -int prcmu_set_ddr_opp(u8 opp) +int db8500_prcmu_set_ddr_opp(u8 opp) { if (opp < DDR_100_OPP || opp > DDR_25_OPP) return -EINVAL; @@ -935,25 +1054,82 @@ int prcmu_set_ddr_opp(u8 opp) return 0; } + +/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */ +static void request_even_slower_clocks(bool enable) +{ + void __iomem *clock_reg[] = { + PRCM_ACLK_MGT, + PRCM_DMACLK_MGT + }; + unsigned long flags; + unsigned int i; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + for (i = 0; i < ARRAY_SIZE(clock_reg); i++) { + u32 val; + u32 div; + + val = readl(clock_reg[i]); + div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK); + if (enable) { + if ((div <= 1) || (div > 15)) { + pr_err("prcmu: Bad clock divider %d in %s\n", + div, __func__); + goto unlock_and_return; + } + div <<= 1; + } else { + if (div <= 2) + goto unlock_and_return; + div >>= 1; + } + val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) | + (div & PRCM_CLK_MGT_CLKPLLDIV_MASK)); + writel(val, clock_reg[i]); + } + +unlock_and_return: + /* Release the HW semaphore. */ + writel(0, PRCM_SEM); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); +} + /** - * set_ape_opp - set the appropriate APE OPP + * db8500_set_ape_opp - set the appropriate APE OPP * @opp: The new APE operating point to which transition is to be made * Returns: 0 on success, non-zero on failure * * This function sets the operating point of the APE. */ -int prcmu_set_ape_opp(u8 opp) +int db8500_prcmu_set_ape_opp(u8 opp) { int r = 0; + if (opp == mb1_transfer.ape_opp) + return 0; + mutex_lock(&mb1_transfer.lock); + if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP) + request_even_slower_clocks(false); + + if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP)) + goto skip_message; + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) cpu_relax(); writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); - writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + writeb(((opp == APE_50_PARTLY_25_OPP) ? APE_50_OPP : opp), + (tcdm_base + PRCM_REQ_MB1_APE_OPP)); writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); wait_for_completion(&mb1_transfer.work); @@ -962,17 +1138,24 @@ int prcmu_set_ape_opp(u8 opp) (mb1_transfer.ack.ape_opp != opp)) r = -EIO; +skip_message: + if ((!r && (opp == APE_50_PARTLY_25_OPP)) || + (r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP))) + request_even_slower_clocks(true); + if (!r) + mb1_transfer.ape_opp = opp; + mutex_unlock(&mb1_transfer.lock); return r; } /** - * prcmu_get_ape_opp - get the current APE OPP + * db8500_prcmu_get_ape_opp - get the current APE OPP * * Returns: the current APE OPP */ -int prcmu_get_ape_opp(void) +int db8500_prcmu_get_ape_opp(void) { return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP); } @@ -1056,7 +1239,9 @@ static int request_pll(u8 clock, bool enable) { int r = 0; - if (clock == PRCMU_PLLSOC1) + if (clock == PRCMU_PLLSOC0) + clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF); + else if (clock == PRCMU_PLLSOC1) clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF); else return -EINVAL; @@ -1081,132 +1266,6 @@ static int request_pll(u8 clock, bool enable) } /** - * prcmu_set_hwacc - set the power state of a h/w accelerator - * @hwacc_dev: The hardware accelerator (enum hw_acc_dev). - * @state: The new power state (enum hw_acc_state). - * - * This function sets the power state of a hardware accelerator. - * This function should not be called from interrupt context. - * - * NOTE! Deprecated, to be removed when all users switched over to use the - * regulator framework API. - */ -int prcmu_set_hwacc(u16 hwacc_dev, u8 state) -{ - int r = 0; - bool ram_retention = false; - bool enable, enable_ret; - - /* check argument */ - BUG_ON(hwacc_dev >= NUM_HW_ACC); - - /* get state of switches */ - enable = hwacc_enabled[hwacc_dev]; - enable_ret = hwacc_ret_enabled[hwacc_dev]; - - /* set flag if retention is possible */ - switch (hwacc_dev) { - case HW_ACC_SVAMMDSP: - case HW_ACC_SIAMMDSP: - case HW_ACC_ESRAM1: - case HW_ACC_ESRAM2: - case HW_ACC_ESRAM3: - case HW_ACC_ESRAM4: - ram_retention = true; - break; - } - - /* check argument */ - BUG_ON(state > HW_ON); - BUG_ON(state == HW_OFF_RAMRET && !ram_retention); - - /* modify enable flags */ - switch (state) { - case HW_OFF: - enable_ret = false; - enable = false; - break; - case HW_ON: - enable = true; - break; - case HW_OFF_RAMRET: - enable_ret = true; - enable = false; - break; - } - - /* get regulator (lazy) */ - if (hwacc_regulator[hwacc_dev] == NULL) { - hwacc_regulator[hwacc_dev] = regulator_get(NULL, - hwacc_regulator_name[hwacc_dev]); - if (IS_ERR(hwacc_regulator[hwacc_dev])) { - pr_err("prcmu: failed to get supply %s\n", - hwacc_regulator_name[hwacc_dev]); - r = PTR_ERR(hwacc_regulator[hwacc_dev]); - goto out; - } - } - - if (ram_retention) { - if (hwacc_ret_regulator[hwacc_dev] == NULL) { - hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL, - hwacc_ret_regulator_name[hwacc_dev]); - if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) { - pr_err("prcmu: failed to get supply %s\n", - hwacc_ret_regulator_name[hwacc_dev]); - r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]); - goto out; - } - } - } - - /* set regulators */ - if (ram_retention) { - if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) { - r = regulator_enable(hwacc_ret_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: ret enable failed\n"); - goto out; - } - hwacc_ret_enabled[hwacc_dev] = true; - } - } - - if (enable && !hwacc_enabled[hwacc_dev]) { - r = regulator_enable(hwacc_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: enable failed\n"); - goto out; - } - hwacc_enabled[hwacc_dev] = true; - } - - if (!enable && hwacc_enabled[hwacc_dev]) { - r = regulator_disable(hwacc_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: disable failed\n"); - goto out; - } - hwacc_enabled[hwacc_dev] = false; - } - - if (ram_retention) { - if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) { - r = regulator_disable(hwacc_ret_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: ret disable failed\n"); - goto out; - } - hwacc_ret_enabled[hwacc_dev] = false; - } - } - -out: - return r; -} -EXPORT_SYMBOL(prcmu_set_hwacc); - -/** * db8500_prcmu_set_epod - set the state of a EPOD (power domain) * @epod_id: The EPOD to set * @epod_state: The new EPOD state @@ -1375,7 +1434,7 @@ static int request_timclk(bool enable) return 0; } -static int request_reg_clock(u8 clock, bool enable) +static int request_clock(u8 clock, bool enable) { u32 val; unsigned long flags; @@ -1386,14 +1445,14 @@ static int request_reg_clock(u8 clock, bool enable) while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); - val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + val = readl(clk_mgt[clock].reg); if (enable) { val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw); } else { clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK); } - writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + writel(val, clk_mgt[clock].reg); /* Release the HW semaphore. */ writel(0, PRCM_SEM); @@ -1413,7 +1472,7 @@ static int request_sga_clock(u8 clock, bool enable) writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS); } - ret = request_reg_clock(clock, enable); + ret = request_clock(clock, enable); if (!ret && !enable) { val = readl(PRCM_CGATING_BYPASS); @@ -1423,6 +1482,78 @@ static int request_sga_clock(u8 clock, bool enable) return ret; } +static inline bool plldsi_locked(void) +{ + return (readl(PRCM_PLLDSI_LOCKP) & + (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 | + PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) == + (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 | + PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3); +} + +static int request_plldsi(bool enable) +{ + int r = 0; + u32 val; + + writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP | + PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ? + PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET)); + + val = readl(PRCM_PLLDSI_ENABLE); + if (enable) + val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + else + val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + writel(val, PRCM_PLLDSI_ENABLE); + + if (enable) { + unsigned int i; + bool locked = plldsi_locked(); + + for (i = 10; !locked && (i > 0); --i) { + udelay(100); + locked = plldsi_locked(); + } + if (locked) { + writel(PRCM_APE_RESETN_DSIPLL_RESETN, + PRCM_APE_RESETN_SET); + } else { + writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP | + PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), + PRCM_MMIP_LS_CLAMP_SET); + val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + writel(val, PRCM_PLLDSI_ENABLE); + r = -EAGAIN; + } + } else { + writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR); + } + return r; +} + +static int request_dsiclk(u8 n, bool enable) +{ + u32 val; + + val = readl(PRCM_DSI_PLLOUT_SEL); + val &= ~dsiclk[n].divsel_mask; + val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) << + dsiclk[n].divsel_shift); + writel(val, PRCM_DSI_PLLOUT_SEL); + return 0; +} + +static int request_dsiescclk(u8 n, bool enable) +{ + u32 val; + + val = readl(PRCM_DSITVCLK_DIV); + enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en); + writel(val, PRCM_DSITVCLK_DIV); + return 0; +} + /** * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled. * @clock: The clock for which the request is made. @@ -1433,21 +1564,435 @@ static int request_sga_clock(u8 clock, bool enable) */ int db8500_prcmu_request_clock(u8 clock, bool enable) { - switch(clock) { - case PRCMU_SGACLK: + if (clock == PRCMU_SGACLK) return request_sga_clock(clock, enable); - case PRCMU_TIMCLK: + else if (clock < PRCMU_NUM_REG_CLOCKS) + return request_clock(clock, enable); + else if (clock == PRCMU_TIMCLK) return request_timclk(enable); - case PRCMU_SYSCLK: + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return request_dsiclk((clock - PRCMU_DSI0CLK), enable); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable); + else if (clock == PRCMU_PLLDSI) + return request_plldsi(enable); + else if (clock == PRCMU_SYSCLK) return request_sysclk(enable); - case PRCMU_PLLSOC1: + else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1)) return request_pll(clock, enable); + else + return -EINVAL; +} + +static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate, + int branch) +{ + u64 rate; + u32 val; + u32 d; + u32 div = 1; + + val = readl(reg); + + rate = src_rate; + rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT); + + d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT); + if (d > 1) + div *= d; + + d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT); + if (d > 1) + div *= d; + + if (val & PRCM_PLL_FREQ_SELDIV2) + div *= 2; + + if ((branch == PLL_FIX) || ((branch == PLL_DIV) && + (val & PRCM_PLL_FREQ_DIV2EN) && + ((reg == PRCM_PLLSOC0_FREQ) || + (reg == PRCM_PLLDDR_FREQ)))) + div *= 2; + + (void)do_div(rate, div); + + return (unsigned long)rate; +} + +#define ROOT_CLOCK_RATE 38400000 + +static unsigned long clock_rate(u8 clock) +{ + u32 val; + u32 pllsw; + unsigned long rate = ROOT_CLOCK_RATE; + + val = readl(clk_mgt[clock].reg); + + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV)) + rate /= 2; + return rate; + } + + val |= clk_mgt[clock].pllsw; + pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); + + if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0) + rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch); + else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1) + rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch); + else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR) + rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch); + else + return 0; + + if ((clock == PRCMU_SGACLK) && + (val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) { + u64 r = (rate * 10); + + (void)do_div(r, 25); + return (unsigned long)r; + } + val &= PRCM_CLK_MGT_CLKPLLDIV_MASK; + if (val) + return rate / val; + else + return 0; +} + +static unsigned long dsiclk_rate(u8 n) +{ + u32 divsel; + u32 div = 1; + + divsel = readl(PRCM_DSI_PLLOUT_SEL); + divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift); + + if (divsel == PRCM_DSI_PLLOUT_SEL_OFF) + divsel = dsiclk[n].divsel; + + switch (divsel) { + case PRCM_DSI_PLLOUT_SEL_PHI_4: + div *= 2; + case PRCM_DSI_PLLOUT_SEL_PHI_2: + div *= 2; + case PRCM_DSI_PLLOUT_SEL_PHI: + return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW) / div; default: - break; + return 0; + } +} + +static unsigned long dsiescclk_rate(u8 n) +{ + u32 div; + + div = readl(PRCM_DSITVCLK_DIV); + div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift)); + return clock_rate(PRCMU_TVCLK) / max((u32)1, div); +} + +unsigned long prcmu_clock_rate(u8 clock) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + return clock_rate(clock); + else if (clock == PRCMU_TIMCLK) + return ROOT_CLOCK_RATE / 16; + else if (clock == PRCMU_SYSCLK) + return ROOT_CLOCK_RATE; + else if (clock == PRCMU_PLLSOC0) + return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLSOC1) + return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLDDR) + return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLDSI) + return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return dsiclk_rate(clock - PRCMU_DSI0CLK); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK); + else + return 0; +} + +static unsigned long clock_source_rate(u32 clk_mgt_val, int branch) +{ + if (clk_mgt_val & PRCM_CLK_MGT_CLK38) + return ROOT_CLOCK_RATE; + clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK; + if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0) + return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch); + else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1) + return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch); + else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR) + return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch); + else + return 0; +} + +static u32 clock_divider(unsigned long src_rate, unsigned long rate) +{ + u32 div; + + div = (src_rate / rate); + if (div == 0) + return 1; + if (rate < (src_rate / div)) + div++; + return div; +} + +static long round_clock_rate(u8 clock, unsigned long rate) +{ + u32 val; + u32 div; + unsigned long src_rate; + long rounded_rate; + + val = readl(clk_mgt[clock].reg); + src_rate = clock_source_rate((val | clk_mgt[clock].pllsw), + clk_mgt[clock].branch); + div = clock_divider(src_rate, rate); + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div) { + if (div > 2) + div = 2; + } else { + div = 1; + } + } else if ((clock == PRCMU_SGACLK) && (div == 3)) { + u64 r = (src_rate * 10); + + (void)do_div(r, 25); + if (r <= rate) + return (unsigned long)r; + } + rounded_rate = (src_rate / min(div, (u32)31)); + + return rounded_rate; +} + +#define MIN_PLL_VCO_RATE 600000000ULL +#define MAX_PLL_VCO_RATE 1680640000ULL + +static long round_plldsi_rate(unsigned long rate) +{ + long rounded_rate = 0; + unsigned long src_rate; + unsigned long rem; + u32 r; + + src_rate = clock_rate(PRCMU_HDMICLK); + rem = rate; + + for (r = 7; (rem > 0) && (r > 0); r--) { + u64 d; + + d = (r * rate); + (void)do_div(d, src_rate); + if (d < 6) + d = 6; + else if (d > 255) + d = 255; + d *= src_rate; + if (((2 * d) < (r * MIN_PLL_VCO_RATE)) || + ((r * MAX_PLL_VCO_RATE) < (2 * d))) + continue; + (void)do_div(d, r); + if (rate < d) { + if (rounded_rate == 0) + rounded_rate = (long)d; + break; + } + if ((rate - d) < rem) { + rem = (rate - d); + rounded_rate = (long)d; + } + } + return rounded_rate; +} + +static long round_dsiclk_rate(unsigned long rate) +{ + u32 div; + unsigned long src_rate; + long rounded_rate; + + src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW); + div = clock_divider(src_rate, rate); + rounded_rate = (src_rate / ((div > 2) ? 4 : div)); + + return rounded_rate; +} + +static long round_dsiescclk_rate(unsigned long rate) +{ + u32 div; + unsigned long src_rate; + long rounded_rate; + + src_rate = clock_rate(PRCMU_TVCLK); + div = clock_divider(src_rate, rate); + rounded_rate = (src_rate / min(div, (u32)255)); + + return rounded_rate; +} + +long prcmu_round_clock_rate(u8 clock, unsigned long rate) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + return round_clock_rate(clock, rate); + else if (clock == PRCMU_PLLDSI) + return round_plldsi_rate(rate); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return round_dsiclk_rate(rate); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return round_dsiescclk_rate(rate); + else + return (long)prcmu_clock_rate(clock); +} + +static void set_clock_rate(u8 clock, unsigned long rate) +{ + u32 val; + u32 div; + unsigned long src_rate; + unsigned long flags; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(clk_mgt[clock].reg); + src_rate = clock_source_rate((val | clk_mgt[clock].pllsw), + clk_mgt[clock].branch); + div = clock_divider(src_rate, rate); + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div) { + if (div > 1) + val |= PRCM_CLK_MGT_CLK38DIV; + else + val &= ~PRCM_CLK_MGT_CLK38DIV; + } + } else if (clock == PRCMU_SGACLK) { + val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK | + PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN); + if (div == 3) { + u64 r = (src_rate * 10); + + (void)do_div(r, 25); + if (r <= rate) { + val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN; + div = 0; + } + } + val |= min(div, (u32)31); + } else { + val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK; + val |= min(div, (u32)31); + } + writel(val, clk_mgt[clock].reg); + + /* Release the HW semaphore. */ + writel(0, PRCM_SEM); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); +} + +static int set_plldsi_rate(unsigned long rate) +{ + unsigned long src_rate; + unsigned long rem; + u32 pll_freq = 0; + u32 r; + + src_rate = clock_rate(PRCMU_HDMICLK); + rem = rate; + + for (r = 7; (rem > 0) && (r > 0); r--) { + u64 d; + u64 hwrate; + + d = (r * rate); + (void)do_div(d, src_rate); + if (d < 6) + d = 6; + else if (d > 255) + d = 255; + hwrate = (d * src_rate); + if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) || + ((r * MAX_PLL_VCO_RATE) < (2 * hwrate))) + continue; + (void)do_div(hwrate, r); + if (rate < hwrate) { + if (pll_freq == 0) + pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) | + (r << PRCM_PLL_FREQ_R_SHIFT)); + break; + } + if ((rate - hwrate) < rem) { + rem = (rate - hwrate); + pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) | + (r << PRCM_PLL_FREQ_R_SHIFT)); + } } + if (pll_freq == 0) + return -EINVAL; + + pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT); + writel(pll_freq, PRCM_PLLDSI_FREQ); + + return 0; +} + +static void set_dsiclk_rate(u8 n, unsigned long rate) +{ + u32 val; + u32 div; + + div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ, + clock_rate(PRCMU_HDMICLK), PLL_RAW), rate); + + dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI : + (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 : + /* else */ PRCM_DSI_PLLOUT_SEL_PHI_4; + + val = readl(PRCM_DSI_PLLOUT_SEL); + val &= ~dsiclk[n].divsel_mask; + val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift); + writel(val, PRCM_DSI_PLLOUT_SEL); +} + +static void set_dsiescclk_rate(u8 n, unsigned long rate) +{ + u32 val; + u32 div; + + div = clock_divider(clock_rate(PRCMU_TVCLK), rate); + val = readl(PRCM_DSITVCLK_DIV); + val &= ~dsiescclk[n].div_mask; + val |= (min(div, (u32)255) << dsiescclk[n].div_shift); + writel(val, PRCM_DSITVCLK_DIV); +} + +int prcmu_set_clock_rate(u8 clock, unsigned long rate) +{ if (clock < PRCMU_NUM_REG_CLOCKS) - return request_reg_clock(clock, enable); - return -EINVAL; + set_clock_rate(clock, rate); + else if (clock == PRCMU_PLLDSI) + return set_plldsi_rate(rate); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate); + return 0; } int db8500_prcmu_config_esram0_deep_sleep(u8 state) @@ -1476,7 +2021,7 @@ int db8500_prcmu_config_esram0_deep_sleep(u8 state) return 0; } -int prcmu_config_hotdog(u8 threshold) +int db8500_prcmu_config_hotdog(u8 threshold) { mutex_lock(&mb4_transfer.lock); @@ -1494,7 +2039,7 @@ int prcmu_config_hotdog(u8 threshold) return 0; } -int prcmu_config_hotmon(u8 low, u8 high) +int db8500_prcmu_config_hotmon(u8 low, u8 high) { mutex_lock(&mb4_transfer.lock); @@ -1533,7 +2078,7 @@ static int config_hot_period(u16 val) return 0; } -int prcmu_start_temp_sense(u16 cycles32k) +int db8500_prcmu_start_temp_sense(u16 cycles32k) { if (cycles32k == 0xFFFF) return -EINVAL; @@ -1541,7 +2086,7 @@ int prcmu_start_temp_sense(u16 cycles32k) return config_hot_period(cycles32k); } -int prcmu_stop_temp_sense(void) +int db8500_prcmu_stop_temp_sense(void) { return config_hot_period(0xFFFF); } @@ -1570,7 +2115,7 @@ static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3) } -int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) { BUG_ON(num == 0 || num > 0xf); return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0, @@ -1578,17 +2123,17 @@ int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) A9WDOG_AUTO_OFF_DIS); } -int prcmu_enable_a9wdog(u8 id) +int db8500_prcmu_enable_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0); } -int prcmu_disable_a9wdog(u8 id) +int db8500_prcmu_disable_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0); } -int prcmu_kick_a9wdog(u8 id) +int db8500_prcmu_kick_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0); } @@ -1596,16 +2141,8 @@ int prcmu_kick_a9wdog(u8 id) /* * timeout is 28 bit, in ms. */ -#define MAX_WATCHDOG_TIMEOUT 131000 -int prcmu_load_a9wdog(u8 id, u32 timeout) +int db8500_prcmu_load_a9wdog(u8 id, u32 timeout) { - if (timeout > MAX_WATCHDOG_TIMEOUT) - /* - * Due to calculation bug in prcmu fw, timeouts - * can't be bigger than 131 seconds. - */ - return -EINVAL; - return prcmu_a9wdog(MB4H_A9WDOG_LOAD, (id & A9WDOG_ID_MASK) | /* @@ -1619,41 +2156,6 @@ int prcmu_load_a9wdog(u8 id, u32 timeout) } /** - * prcmu_set_clock_divider() - Configure the clock divider. - * @clock: The clock for which the request is made. - * @divider: The clock divider. (< 32) - * - * This function should only be used by the clock implementation. - * Do not use it from any other place! - */ -int prcmu_set_clock_divider(u8 clock, u8 divider) -{ - u32 val; - unsigned long flags; - - if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider)) - return -EINVAL; - - spin_lock_irqsave(&clk_mgt_lock, flags); - - /* Grab the HW semaphore. */ - while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) - cpu_relax(); - - val = readl(_PRCMU_BASE + clk_mgt[clock].offset); - val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK); - val |= (u32)divider; - writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); - - /* Release the HW semaphore. */ - writel(0, PRCM_SEM); - - spin_unlock_irqrestore(&clk_mgt_lock, flags); - - return 0; -} - -/** * prcmu_abb_read() - Read register value(s) from the ABB. * @slave: The I2C slave address. * @reg: The (start) register address. @@ -1675,6 +2177,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); + writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5)); writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); @@ -1700,16 +2203,19 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) } /** - * prcmu_abb_write() - Write register value(s) to the ABB. + * prcmu_abb_write_masked() - Write masked register value(s) to the ABB. * @slave: The I2C slave address. * @reg: The (start) register address. * @value: The value(s) to write. + * @mask: The mask(s) to use. * @size: The number of registers to write. * - * Reads register value(s) from the ABB. + * Writes masked register value(s) to the ABB. + * For each @value, only the bits set to 1 in the corresponding @mask + * will be written. The other bits are not changed. * @size has to be 1 for the current firmware version. */ -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size) { int r; @@ -1721,6 +2227,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); + writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5)); writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); @@ -1743,6 +2250,23 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) } /** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Writes register value(s) to the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + u8 mask = ~0; + + return prcmu_abb_write_masked(slave, reg, value, &mask, size); +} + +/** * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem */ void prcmu_ac_wake_req(void) @@ -1850,9 +2374,9 @@ u16 db8500_prcmu_get_reset_code(void) } /** - * prcmu_reset_modem - ask the PRCMU to reset modem + * db8500_prcmu_reset_modem - ask the PRCMU to reset modem */ -void prcmu_modem_reset(void) +void db8500_prcmu_modem_reset(void) { mutex_lock(&mb1_transfer.lock); @@ -2099,6 +2623,26 @@ static struct irq_chip prcmu_irq_chip = { .irq_unmask = prcmu_irq_unmask, }; +static char *fw_project_name(u8 project) +{ + switch (project) { + case PRCMU_FW_PROJECT_U8500: + return "U8500"; + case PRCMU_FW_PROJECT_U8500_C2: + return "U8500 C2"; + case PRCMU_FW_PROJECT_U9500: + return "U9500"; + case PRCMU_FW_PROJECT_U9500_C2: + return "U9500 C2"; + case PRCMU_FW_PROJECT_U8520: + return "U8520"; + case PRCMU_FW_PROJECT_U8420: + return "U8420"; + default: + return "Unknown"; + } +} + void __init db8500_prcmu_early_init(void) { unsigned int i; @@ -2108,11 +2652,13 @@ void __init db8500_prcmu_early_init(void) if (tcpm_base != NULL) { u32 version; version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET); - prcmu_version.project_number = version & 0xFF; - prcmu_version.api_version = (version >> 8) & 0xFF; - prcmu_version.func_version = (version >> 16) & 0xFF; - prcmu_version.errata = (version >> 24) & 0xFF; - pr_info("PRCMU firmware version %d.%d.%d\n", + fw_info.version.project = version & 0xFF; + fw_info.version.api_version = (version >> 8) & 0xFF; + fw_info.version.func_version = (version >> 16) & 0xFF; + fw_info.version.errata = (version >> 24) & 0xFF; + fw_info.valid = true; + pr_info("PRCMU firmware: %s, version %d.%d.%d\n", + fw_project_name(fw_info.version.project), (version >> 8) & 0xFF, (version >> 16) & 0xFF, (version >> 24) & 0xFF); iounmap(tcpm_base); @@ -2130,6 +2676,7 @@ void __init db8500_prcmu_early_init(void) init_completion(&mb0_transfer.ac_wake_work); mutex_init(&mb1_transfer.lock); init_completion(&mb1_transfer.work); + mb1_transfer.ape_opp = APE_NO_CHANGE; mutex_init(&mb2_transfer.lock); init_completion(&mb2_transfer.work); spin_lock_init(&mb2_transfer.auto_pm_lock); @@ -2154,7 +2701,7 @@ void __init db8500_prcmu_early_init(void) } } -static void __init db8500_prcmu_init_clkforce(void) +static void __init init_prcm_registers(void) { u32 val; @@ -2186,19 +2733,17 @@ static struct regulator_consumer_supply db8500_vape_consumers[] = { REGULATOR_SUPPLY("vcore", "uart1"), REGULATOR_SUPPLY("vcore", "uart2"), REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"), + REGULATOR_SUPPLY("v-hsi", "ste_hsi.0"), }; static struct regulator_consumer_supply db8500_vsmps2_consumers[] = { - /* CG2900 and CW1200 power to off-chip peripherals */ - REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"), - REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"), REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"), /* AV8100 regulator */ REGULATOR_SUPPLY("hdmi_1v8", "0-0070"), }; static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = { - REGULATOR_SUPPLY("vsupply", "b2r2.0"), + REGULATOR_SUPPLY("vsupply", "b2r2_bus"), REGULATOR_SUPPLY("vsupply", "mcde"), }; @@ -2235,6 +2780,7 @@ static struct regulator_consumer_supply db8500_esram12_consumers[] = { static struct regulator_consumer_supply db8500_esram34_consumers[] = { REGULATOR_SUPPLY("v-esram34", "mcde"), REGULATOR_SUPPLY("esram34", "cm_control"), + REGULATOR_SUPPLY("lcla_esram", "dma40.0"), }; static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { @@ -2291,7 +2837,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }, [DB8500_REGULATOR_SWITCH_SVAMMDSP] = { - .supply_regulator = "db8500-vape", + /* dependency to u8500-vape is handled outside regulator framework */ .constraints = { .name = "db8500-sva-mmdsp", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2307,7 +2853,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }, [DB8500_REGULATOR_SWITCH_SVAPIPE] = { - .supply_regulator = "db8500-vape", + /* dependency to u8500-vape is handled outside regulator framework */ .constraints = { .name = "db8500-sva-pipe", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2316,7 +2862,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers), }, [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { - .supply_regulator = "db8500-vape", + /* dependency to u8500-vape is handled outside regulator framework */ .constraints = { .name = "db8500-sia-mmdsp", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2331,7 +2877,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }, [DB8500_REGULATOR_SWITCH_SIAPIPE] = { - .supply_regulator = "db8500-vape", + /* dependency to u8500-vape is handled outside regulator framework */ .constraints = { .name = "db8500-sia-pipe", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2359,7 +2905,10 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers), }, [DB8500_REGULATOR_SWITCH_ESRAM12] = { - .supply_regulator = "db8500-vape", + /* + * esram12 is set in retention and supplied by Vsafe when Vape is off, + * no need to hold Vape + */ .constraints = { .name = "db8500-esram12", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2374,7 +2923,10 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }, [DB8500_REGULATOR_SWITCH_ESRAM34] = { - .supply_regulator = "db8500-vape", + /* + * esram34 is set in retention and supplied by Vsafe when Vape is off, + * no need to hold Vape + */ .constraints = { .name = "db8500-esram34", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2412,7 +2964,7 @@ static int __init db8500_prcmu_probe(struct platform_device *pdev) if (ux500_is_svp()) return -ENODEV; - db8500_prcmu_init_clkforce(); + init_prcm_registers(); /* Clean up the mailbox interrupts after pre-kernel code. */ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index ec22e9f..3a0bf91 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -17,41 +17,41 @@ #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end)) -#define PRCM_SVACLK_MGT_OFF 0x008 -#define PRCM_SIACLK_MGT_OFF 0x00C -#define PRCM_SGACLK_MGT_OFF 0x014 -#define PRCM_UARTCLK_MGT_OFF 0x018 -#define PRCM_MSP02CLK_MGT_OFF 0x01C -#define PRCM_I2CCLK_MGT_OFF 0x020 -#define PRCM_SDMMCCLK_MGT_OFF 0x024 -#define PRCM_SLIMCLK_MGT_OFF 0x028 -#define PRCM_PER1CLK_MGT_OFF 0x02C -#define PRCM_PER2CLK_MGT_OFF 0x030 -#define PRCM_PER3CLK_MGT_OFF 0x034 -#define PRCM_PER5CLK_MGT_OFF 0x038 -#define PRCM_PER6CLK_MGT_OFF 0x03C -#define PRCM_PER7CLK_MGT_OFF 0x040 -#define PRCM_PWMCLK_MGT_OFF 0x044 /* for DB5500 */ -#define PRCM_IRDACLK_MGT_OFF 0x048 /* for DB5500 */ -#define PRCM_IRRCCLK_MGT_OFF 0x04C /* for DB5500 */ -#define PRCM_LCDCLK_MGT_OFF 0x044 -#define PRCM_BMLCLK_MGT_OFF 0x04C -#define PRCM_HSITXCLK_MGT_OFF 0x050 -#define PRCM_HSIRXCLK_MGT_OFF 0x054 -#define PRCM_HDMICLK_MGT_OFF 0x058 -#define PRCM_APEATCLK_MGT_OFF 0x05C -#define PRCM_APETRACECLK_MGT_OFF 0x060 -#define PRCM_MCDECLK_MGT_OFF 0x064 -#define PRCM_IPI2CCLK_MGT_OFF 0x068 -#define PRCM_DSIALTCLK_MGT_OFF 0x06C -#define PRCM_DMACLK_MGT_OFF 0x074 -#define PRCM_B2R2CLK_MGT_OFF 0x078 -#define PRCM_TVCLK_MGT_OFF 0x07C -#define PRCM_UNIPROCLK_MGT_OFF 0x278 -#define PRCM_SSPCLK_MGT_OFF 0x280 -#define PRCM_RNGCLK_MGT_OFF 0x284 -#define PRCM_UICCCLK_MGT_OFF 0x27C -#define PRCM_MSP1CLK_MGT_OFF 0x288 +#define PRCM_CLK_MGT(_offset) (void __iomem *)(IO_ADDRESS(U8500_PRCMU_BASE) \ + + _offset) +#define PRCM_ACLK_MGT PRCM_CLK_MGT(0x004) +#define PRCM_SVACLK_MGT PRCM_CLK_MGT(0x008) +#define PRCM_SIACLK_MGT PRCM_CLK_MGT(0x00C) +#define PRCM_SGACLK_MGT PRCM_CLK_MGT(0x014) +#define PRCM_UARTCLK_MGT PRCM_CLK_MGT(0x018) +#define PRCM_MSP02CLK_MGT PRCM_CLK_MGT(0x01C) +#define PRCM_I2CCLK_MGT PRCM_CLK_MGT(0x020) +#define PRCM_SDMMCCLK_MGT PRCM_CLK_MGT(0x024) +#define PRCM_SLIMCLK_MGT PRCM_CLK_MGT(0x028) +#define PRCM_PER1CLK_MGT PRCM_CLK_MGT(0x02C) +#define PRCM_PER2CLK_MGT PRCM_CLK_MGT(0x030) +#define PRCM_PER3CLK_MGT PRCM_CLK_MGT(0x034) +#define PRCM_PER5CLK_MGT PRCM_CLK_MGT(0x038) +#define PRCM_PER6CLK_MGT PRCM_CLK_MGT(0x03C) +#define PRCM_PER7CLK_MGT PRCM_CLK_MGT(0x040) +#define PRCM_LCDCLK_MGT PRCM_CLK_MGT(0x044) +#define PRCM_BMLCLK_MGT PRCM_CLK_MGT(0x04C) +#define PRCM_HSITXCLK_MGT PRCM_CLK_MGT(0x050) +#define PRCM_HSIRXCLK_MGT PRCM_CLK_MGT(0x054) +#define PRCM_HDMICLK_MGT PRCM_CLK_MGT(0x058) +#define PRCM_APEATCLK_MGT PRCM_CLK_MGT(0x05C) +#define PRCM_APETRACECLK_MGT PRCM_CLK_MGT(0x060) +#define PRCM_MCDECLK_MGT PRCM_CLK_MGT(0x064) +#define PRCM_IPI2CCLK_MGT PRCM_CLK_MGT(0x068) +#define PRCM_DSIALTCLK_MGT PRCM_CLK_MGT(0x06C) +#define PRCM_DMACLK_MGT PRCM_CLK_MGT(0x074) +#define PRCM_B2R2CLK_MGT PRCM_CLK_MGT(0x078) +#define PRCM_TVCLK_MGT PRCM_CLK_MGT(0x07C) +#define PRCM_UNIPROCLK_MGT PRCM_CLK_MGT(0x278) +#define PRCM_SSPCLK_MGT PRCM_CLK_MGT(0x280) +#define PRCM_RNGCLK_MGT PRCM_CLK_MGT(0x284) +#define PRCM_UICCCLK_MGT PRCM_CLK_MGT(0x27C) +#define PRCM_MSP1CLK_MGT PRCM_CLK_MGT(0x288) #define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f @@ -79,6 +79,8 @@ /* ARM WFI Standby signal register */ #define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) +#define PRCM_ARM_WFI_STANDBY_WFI0 0x08 +#define PRCM_ARM_WFI_STANDBY_WFI1 0x10 #define PRCM_IOCR (_PRCMU_BASE + 0x310) #define PRCM_IOCR_IOFORCE 0x1 @@ -131,20 +133,58 @@ #define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) #define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) +#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP BIT(11) +#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI BIT(22) + /* PRCMU clock/PLL/reset registers */ +#define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080) +#define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084) +#define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C) +#define PRCM_PLL_FREQ_D_SHIFT 0 +#define PRCM_PLL_FREQ_D_MASK BITS(0, 7) +#define PRCM_PLL_FREQ_N_SHIFT 8 +#define PRCM_PLL_FREQ_N_MASK BITS(8, 13) +#define PRCM_PLL_FREQ_R_SHIFT 16 +#define PRCM_PLL_FREQ_R_MASK BITS(16, 18) +#define PRCM_PLL_FREQ_SELDIV2 BIT(24) +#define PRCM_PLL_FREQ_DIV2EN BIT(25) + #define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) #define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) #define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) -#define PRCM_LCDCLK_MGT (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF) -#define PRCM_MCDECLK_MGT (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF) -#define PRCM_HDMICLK_MGT (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF) -#define PRCM_TVCLK_MGT (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF) #define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) #define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) #define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) #define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) #define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) +#define PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE BIT(0) + +#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 BIT(0) +#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3 BIT(1) + +#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT 0 +#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK BITS(0, 2) +#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT 8 +#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK BITS(8, 10) + +#define PRCM_DSI_PLLOUT_SEL_OFF 0 +#define PRCM_DSI_PLLOUT_SEL_PHI 1 +#define PRCM_DSI_PLLOUT_SEL_PHI_2 2 +#define PRCM_DSI_PLLOUT_SEL_PHI_4 3 + +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT 0 +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK BITS(0, 7) +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT 8 +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK BITS(8, 15) +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT 16 +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK BITS(16, 23) +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN BIT(24) +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN BIT(25) +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN BIT(26) + +#define PRCM_APE_RESETN_DSIPLL_RESETN BIT(14) + #define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC) #define PRCM_CLKOCR_CLKOUT0_REF_CLK (1 << 0) #define PRCM_CLKOCR_CLKOUT0_MASK BITS(0, 13) @@ -183,9 +223,15 @@ #define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24) #define PRCM_CLKOCR_CLK1TYPE BIT(28) -#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) -#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) -#define PRCM_CLK_MGT_CLKEN BIT(8) +#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) +#define PRCM_CLK_MGT_CLKPLLSW_SOC0 BIT(5) +#define PRCM_CLK_MGT_CLKPLLSW_SOC1 BIT(6) +#define PRCM_CLK_MGT_CLKPLLSW_DDR BIT(7) +#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) +#define PRCM_CLK_MGT_CLKEN BIT(8) +#define PRCM_CLK_MGT_CLK38 BIT(9) +#define PRCM_CLK_MGT_CLK38DIV BIT(11) +#define PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN BIT(12) /* GPIOCR register */ #define PRCM_GPIOCR_SPI2_SELECT BIT(23) diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index 7122386..9fd4f63 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -560,6 +560,8 @@ EXPORT_SYMBOL(mc13xxx_get_flags); #define MC13XXX_ADC1_CHAN0_SHIFT 5 #define MC13XXX_ADC1_CHAN1_SHIFT 8 +#define MC13783_ADC1_ATO_SHIFT 11 +#define MC13783_ADC1_ATOX (1 << 19) struct mc13xxx_adcdone_data { struct mc13xxx *mc13xxx; @@ -580,7 +582,8 @@ static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data) #define MC13XXX_ADC_WORKING (1 << 0) int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode, - unsigned int channel, unsigned int *sample) + unsigned int channel, u8 ato, bool atox, + unsigned int *sample) { u32 adc0, adc1, old_adc0; int i, ret; @@ -631,6 +634,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode, return -EINVAL; } + adc1 |= ato << MC13783_ADC1_ATO_SHIFT; + if (atox) + adc1 |= MC13783_ADC1_ATOX; dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__); mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE, mc13xxx_handler_adcdone, __func__, &adcdone_data); @@ -813,7 +819,8 @@ err_revision: mc13xxx_add_subdevice(mc13xxx, "%s-rtc"); if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN) - mc13xxx_add_subdevice(mc13xxx, "%s-ts"); + mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts", + &pdata->touch, sizeof(pdata->touch)); if (pdata) { mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator", diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 86cc3f7..62e5e36 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -19,9 +19,6 @@ #include <linux/string.h> #include <linux/mfd/mcp.h> -#include <mach/dma.h> -#include <asm/system.h> - #define to_mcp(d) container_of(d, struct mcp, attached_device) #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) @@ -48,39 +45,11 @@ static int mcp_bus_remove(struct device *dev) return 0; } -static int mcp_bus_suspend(struct device *dev, pm_message_t state) -{ - struct mcp *mcp = to_mcp(dev); - int ret = 0; - - if (dev->driver) { - struct mcp_driver *drv = to_mcp_driver(dev->driver); - - ret = drv->suspend(mcp, state); - } - return ret; -} - -static int mcp_bus_resume(struct device *dev) -{ - struct mcp *mcp = to_mcp(dev); - int ret = 0; - - if (dev->driver) { - struct mcp_driver *drv = to_mcp_driver(dev->driver); - - ret = drv->resume(mcp); - } - return ret; -} - static struct bus_type mcp_bus_type = { .name = "mcp", .match = mcp_bus_match, .probe = mcp_bus_probe, .remove = mcp_bus_remove, - .suspend = mcp_bus_suspend, - .resume = mcp_bus_resume, }; /** @@ -208,6 +177,7 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) mcp = kzalloc(sizeof(struct mcp) + size, GFP_KERNEL); if (mcp) { spin_lock_init(&mcp->lock); + device_initialize(&mcp->attached_device); mcp->attached_device.parent = parent; mcp->attached_device.bus = &mcp_bus_type; mcp->attached_device.dma_mask = parent->dma_mask; @@ -217,18 +187,25 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) } EXPORT_SYMBOL(mcp_host_alloc); -int mcp_host_register(struct mcp *mcp) +int mcp_host_add(struct mcp *mcp, void *pdata) { + mcp->attached_device.platform_data = pdata; dev_set_name(&mcp->attached_device, "mcp0"); - return device_register(&mcp->attached_device); + return device_add(&mcp->attached_device); +} +EXPORT_SYMBOL(mcp_host_add); + +void mcp_host_del(struct mcp *mcp) +{ + device_del(&mcp->attached_device); } -EXPORT_SYMBOL(mcp_host_register); +EXPORT_SYMBOL(mcp_host_del); -void mcp_host_unregister(struct mcp *mcp) +void mcp_host_free(struct mcp *mcp) { - device_unregister(&mcp->attached_device); + put_device(&mcp->attached_device); } -EXPORT_SYMBOL(mcp_host_unregister); +EXPORT_SYMBOL(mcp_host_free); int mcp_driver_register(struct mcp_driver *mcpdrv) { diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 02c53a0..c54e244 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -13,51 +13,60 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/spinlock.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/mfd/mcp.h> -#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach-types.h> -#include <asm/system.h> #include <mach/mcp.h> -#include <mach/assabet.h> - +#define DRIVER_NAME "sa11x0-mcp" struct mcp_sa11x0 { - u32 mccr0; - u32 mccr1; + void __iomem *base0; + void __iomem *base1; + u32 mccr0; + u32 mccr1; }; +/* Register offsets */ +#define MCCR0(m) ((m)->base0 + 0x00) +#define MCDR0(m) ((m)->base0 + 0x08) +#define MCDR1(m) ((m)->base0 + 0x0c) +#define MCDR2(m) ((m)->base0 + 0x10) +#define MCSR(m) ((m)->base0 + 0x18) +#define MCCR1(m) ((m)->base1 + 0x00) + #define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp)) static void mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor) { - unsigned int mccr0; + struct mcp_sa11x0 *m = priv(mcp); divisor /= 32; - mccr0 = Ser4MCCR0 & ~0x00007f00; - mccr0 |= divisor << 8; - Ser4MCCR0 = mccr0; + m->mccr0 &= ~0x00007f00; + m->mccr0 |= divisor << 8; + writel_relaxed(m->mccr0, MCCR0(m)); } static void mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) { - unsigned int mccr0; + struct mcp_sa11x0 *m = priv(mcp); divisor /= 32; - mccr0 = Ser4MCCR0 & ~0x0000007f; - mccr0 |= divisor; - Ser4MCCR0 = mccr0; + m->mccr0 &= ~0x0000007f; + m->mccr0 |= divisor; + writel_relaxed(m->mccr0, MCCR0(m)); } /* @@ -69,14 +78,15 @@ mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) static void mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) { + struct mcp_sa11x0 *m = priv(mcp); int ret = -ETIME; int i; - Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff); + writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m)); for (i = 0; i < 2; i++) { udelay(mcp->rw_timeout); - if (Ser4MCSR & MCSR_CWC) { + if (readl_relaxed(MCSR(m)) & MCSR_CWC) { ret = 0; break; } @@ -95,15 +105,16 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) static unsigned int mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) { + struct mcp_sa11x0 *m = priv(mcp); int ret = -ETIME; int i; - Ser4MCDR2 = reg << 17 | MCDR2_Rd; + writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m)); for (i = 0; i < 2; i++) { udelay(mcp->rw_timeout); - if (Ser4MCSR & MCSR_CRC) { - ret = Ser4MCDR2 & 0xffff; + if (readl_relaxed(MCSR(m)) & MCSR_CRC) { + ret = readl_relaxed(MCDR2(m)) & 0xffff; break; } } @@ -116,13 +127,19 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) static void mcp_sa11x0_enable(struct mcp *mcp) { - Ser4MCSR = -1; - Ser4MCCR0 |= MCCR0_MCE; + struct mcp_sa11x0 *m = priv(mcp); + + writel(-1, MCSR(m)); + m->mccr0 |= MCCR0_MCE; + writel_relaxed(m->mccr0, MCCR0(m)); } static void mcp_sa11x0_disable(struct mcp *mcp) { - Ser4MCCR0 &= ~MCCR0_MCE; + struct mcp_sa11x0 *m = priv(mcp); + + m->mccr0 &= ~MCCR0_MCE; + writel_relaxed(m->mccr0, MCCR0(m)); } /* @@ -137,55 +154,64 @@ static struct mcp_ops mcp_sa11x0 = { .disable = mcp_sa11x0_disable, }; -static int mcp_sa11x0_probe(struct platform_device *pdev) +static int mcp_sa11x0_probe(struct platform_device *dev) { - struct mcp_plat_data *data = pdev->dev.platform_data; + struct mcp_plat_data *data = dev->dev.platform_data; + struct resource *mem0, *mem1; + struct mcp_sa11x0 *m; struct mcp *mcp; int ret; if (!data) return -ENODEV; - if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) - return -EBUSY; + mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0); + mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1); + if (!mem0 || !mem1) + return -ENXIO; + + if (!request_mem_region(mem0->start, resource_size(mem0), + DRIVER_NAME)) { + ret = -EBUSY; + goto err_mem0; + } - mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0)); + if (!request_mem_region(mem1->start, resource_size(mem1), + DRIVER_NAME)) { + ret = -EBUSY; + goto err_mem1; + } + + mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0)); if (!mcp) { ret = -ENOMEM; - goto release; + goto err_alloc; } mcp->owner = THIS_MODULE; mcp->ops = &mcp_sa11x0; mcp->sclk_rate = data->sclk_rate; - mcp->dma_audio_rd = DMA_Ser4MCP0Rd; - mcp->dma_audio_wr = DMA_Ser4MCP0Wr; - mcp->dma_telco_rd = DMA_Ser4MCP1Rd; - mcp->dma_telco_wr = DMA_Ser4MCP1Wr; - mcp->gpio_base = data->gpio_base; - platform_set_drvdata(pdev, mcp); + m = priv(mcp); + m->mccr0 = data->mccr0 | 0x7f7f; + m->mccr1 = data->mccr1; - if (machine_is_assabet()) { - ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); + m->base0 = ioremap(mem0->start, resource_size(mem0)); + m->base1 = ioremap(mem1->start, resource_size(mem1)); + if (!m->base0 || !m->base1) { + ret = -ENOMEM; + goto err_ioremap; } - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + platform_set_drvdata(dev, mcp); /* * Initialise device. Note that we initially * set the sampling rate to minimum. */ - Ser4MCSR = -1; - Ser4MCCR1 = data->mccr1; - Ser4MCCR0 = data->mccr0 | 0x7f7f; + writel_relaxed(-1, MCSR(m)); + writel_relaxed(m->mccr1, MCCR1(m)); + writel_relaxed(m->mccr0, MCCR0(m)); /* * Calculate the read/write timeout (us) from the bit clock @@ -195,62 +221,90 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / mcp->sclk_rate; - ret = mcp_host_register(mcp); + ret = mcp_host_add(mcp, data->codec_pdata); if (ret == 0) - goto out; + return 0; - release: - release_mem_region(0x80060000, 0x60); - platform_set_drvdata(pdev, NULL); + platform_set_drvdata(dev, NULL); - out: + err_ioremap: + iounmap(m->base1); + iounmap(m->base0); + mcp_host_free(mcp); + err_alloc: + release_mem_region(mem1->start, resource_size(mem1)); + err_mem1: + release_mem_region(mem0->start, resource_size(mem0)); + err_mem0: return ret; } static int mcp_sa11x0_remove(struct platform_device *dev) { struct mcp *mcp = platform_get_drvdata(dev); + struct mcp_sa11x0 *m = priv(mcp); + struct resource *mem0, *mem1; + + if (m->mccr0 & MCCR0_MCE) + dev_warn(&dev->dev, + "device left active (missing disable call?)\n"); + + mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0); + mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1); platform_set_drvdata(dev, NULL); - mcp_host_unregister(mcp); - release_mem_region(0x80060000, 0x60); + mcp_host_del(mcp); + iounmap(m->base1); + iounmap(m->base0); + mcp_host_free(mcp); + release_mem_region(mem1->start, resource_size(mem1)); + release_mem_region(mem0->start, resource_size(mem0)); return 0; } -static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int mcp_sa11x0_suspend(struct device *dev) { - struct mcp *mcp = platform_get_drvdata(dev); + struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev)); + + if (m->mccr0 & MCCR0_MCE) + dev_warn(dev, "device left active (missing disable call?)\n"); - priv(mcp)->mccr0 = Ser4MCCR0; - priv(mcp)->mccr1 = Ser4MCCR1; - Ser4MCCR0 &= ~MCCR0_MCE; + writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m)); return 0; } -static int mcp_sa11x0_resume(struct platform_device *dev) +static int mcp_sa11x0_resume(struct device *dev) { - struct mcp *mcp = platform_get_drvdata(dev); + struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev)); - Ser4MCCR1 = priv(mcp)->mccr1; - Ser4MCCR0 = priv(mcp)->mccr0; + writel_relaxed(m->mccr1, MCCR1(m)); + writel_relaxed(m->mccr0, MCCR0(m)); return 0; } - -/* - * The driver for the SA11x0 MCP port. - */ -MODULE_ALIAS("platform:sa11x0-mcp"); +#endif + +static const struct dev_pm_ops mcp_sa11x0_pm_ops = { +#ifdef CONFIG_PM_SLEEP + .suspend = mcp_sa11x0_suspend, + .freeze = mcp_sa11x0_suspend, + .poweroff = mcp_sa11x0_suspend, + .resume_noirq = mcp_sa11x0_resume, + .thaw_noirq = mcp_sa11x0_resume, + .restore_noirq = mcp_sa11x0_resume, +#endif +}; static struct platform_driver mcp_sa11x0_driver = { .probe = mcp_sa11x0_probe, .remove = mcp_sa11x0_remove, - .suspend = mcp_sa11x0_suspend, - .resume = mcp_sa11x0_resume, .driver = { - .name = "sa11x0-mcp", + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .pm = &mcp_sa11x0_pm_ops, }, }; @@ -259,6 +313,7 @@ static struct platform_driver mcp_sa11x0_driver = { */ module_platform_driver(mcp_sa11x0_driver); +MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); MODULE_DESCRIPTION("SA11x0 multimedia communications port driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 411f523..ffc3d48 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -162,7 +162,7 @@ int mfd_add_devices(struct device *parent, int id, atomic_t *cnts; /* initialize reference counting for all cells */ - cnts = kcalloc(sizeof(*cnts), n_devs, GFP_KERNEL); + cnts = kcalloc(n_devs, sizeof(*cnts), GFP_KERNEL); if (!cnts) return -ENOMEM; diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 68ac2c5..95a2e54 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -170,7 +170,7 @@ struct usbhs_hcd_omap { /*-------------------------------------------------------------------------*/ const char usbhs_driver_name[] = USBHS_DRIVER_NAME; -static u64 usbhs_dmamask = ~(u32)0; +static u64 usbhs_dmamask = DMA_BIT_MASK(32); /*-------------------------------------------------------------------------*/ @@ -223,7 +223,7 @@ static struct platform_device *omap_usbhs_alloc_child(const char *name, } child->dev.dma_mask = &usbhs_dmamask; - child->dev.coherent_dma_mask = 0xffffffff; + dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32)); child->dev.parent = dev; ret = platform_device_add(child); @@ -799,14 +799,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) platform_set_drvdata(pdev, omap); + omap_usbhs_init(dev); ret = omap_usbhs_alloc_children(pdev); if (ret) { dev_err(dev, "omap_usbhs_alloc_children failed\n"); goto err_alloc; } - omap_usbhs_init(dev); - goto end_probe; err_alloc: diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index ff1a7e7..189c2f0 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -46,13 +46,7 @@ EXPORT_SYMBOL_GPL(pcf50633_read_block); int pcf50633_write_block(struct pcf50633 *pcf , u8 reg, int nr_regs, u8 *data) { - int ret; - - ret = regmap_raw_write(pcf->regmap, reg, data, nr_regs); - if (ret != 0) - return ret; - - return nr_regs; + return regmap_raw_write(pcf->regmap, reg, data, nr_regs); } EXPORT_SYMBOL_GPL(pcf50633_write_block); diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c index 9ab19a8..d02ddf2 100644 --- a/drivers/mfd/pcf50633-gpio.c +++ b/drivers/mfd/pcf50633-gpio.c @@ -19,32 +19,7 @@ #include <linux/mfd/pcf50633/core.h> #include <linux/mfd/pcf50633/gpio.h> - -enum pcf50633_regulator_id { - PCF50633_REGULATOR_AUTO, - PCF50633_REGULATOR_DOWN1, - PCF50633_REGULATOR_DOWN2, - PCF50633_REGULATOR_LDO1, - PCF50633_REGULATOR_LDO2, - PCF50633_REGULATOR_LDO3, - PCF50633_REGULATOR_LDO4, - PCF50633_REGULATOR_LDO5, - PCF50633_REGULATOR_LDO6, - PCF50633_REGULATOR_HCLDO, - PCF50633_REGULATOR_MEMLDO, -}; - -#define PCF50633_REG_AUTOOUT 0x1a -#define PCF50633_REG_DOWN1OUT 0x1e -#define PCF50633_REG_DOWN2OUT 0x22 -#define PCF50633_REG_MEMLDOOUT 0x26 -#define PCF50633_REG_LDO1OUT 0x2d -#define PCF50633_REG_LDO2OUT 0x2f -#define PCF50633_REG_LDO3OUT 0x31 -#define PCF50633_REG_LDO4OUT 0x33 -#define PCF50633_REG_LDO5OUT 0x35 -#define PCF50633_REG_LDO6OUT 0x37 -#define PCF50633_REG_HCLDOOUT 0x39 +#include <linux/mfd/pcf50633/pmic.h> static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = { [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT, diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c index 048a3b9..498286c 100644 --- a/drivers/mfd/pcf50633-irq.c +++ b/drivers/mfd/pcf50633-irq.c @@ -19,12 +19,7 @@ #include <linux/slab.h> #include <linux/mfd/pcf50633/core.h> - -/* Two MBCS registers used during cold start */ -#define PCF50633_REG_MBCS1 0x4b -#define PCF50633_REG_MBCS2 0x4c -#define PCF50633_MBCS1_USBPRES 0x01 -#define PCF50633_MBCS1_ADAPTPRES 0x01 +#include <linux/mfd/pcf50633/mbc.h> int pcf50633_register_irq(struct pcf50633 *pcf, int irq, void (*handler) (int, void *), void *data) diff --git a/drivers/mfd/rc5t583-irq.c b/drivers/mfd/rc5t583-irq.c new file mode 100644 index 0000000..fa6f80f --- /dev/null +++ b/drivers/mfd/rc5t583-irq.c @@ -0,0 +1,408 @@ +/* + * Interrupt driver for RICOH583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mfd/rc5t583.h> + +enum int_type { + SYS_INT = 0x1, + DCDC_INT = 0x2, + RTC_INT = 0x4, + ADC_INT = 0x8, + GPIO_INT = 0x10, +}; + +static int gpedge_add[] = { + RC5T583_GPIO_GPEDGE2, + RC5T583_GPIO_GPEDGE2 +}; + +static int irq_en_add[] = { + RC5T583_INT_EN_SYS1, + RC5T583_INT_EN_SYS2, + RC5T583_INT_EN_DCDC, + RC5T583_INT_EN_RTC, + RC5T583_INT_EN_ADC1, + RC5T583_INT_EN_ADC2, + RC5T583_INT_EN_ADC3, + RC5T583_GPIO_EN_INT +}; + +static int irq_mon_add[] = { + RC5T583_INT_MON_SYS1, + RC5T583_INT_MON_SYS2, + RC5T583_INT_MON_DCDC, + RC5T583_INT_MON_RTC, + RC5T583_INT_IR_ADCL, + RC5T583_INT_IR_ADCH, + RC5T583_INT_IR_ADCEND, + RC5T583_INT_IR_GPIOF, + RC5T583_INT_IR_GPIOR +}; + +static int irq_clr_add[] = { + RC5T583_INT_IR_SYS1, + RC5T583_INT_IR_SYS2, + RC5T583_INT_IR_DCDC, + RC5T583_INT_IR_RTC, + RC5T583_INT_IR_ADCL, + RC5T583_INT_IR_ADCH, + RC5T583_INT_IR_ADCEND, + RC5T583_INT_IR_GPIOF, + RC5T583_INT_IR_GPIOR +}; + +static int main_int_type[] = { + SYS_INT, + SYS_INT, + DCDC_INT, + RTC_INT, + ADC_INT, + ADC_INT, + ADC_INT, + GPIO_INT, + GPIO_INT, +}; + +struct rc5t583_irq_data { + u8 int_type; + u8 master_bit; + u8 int_en_bit; + u8 mask_reg_index; + int grp_index; +}; + +#define RC5T583_IRQ(_int_type, _master_bit, _grp_index, \ + _int_bit, _mask_ind) \ + { \ + .int_type = _int_type, \ + .master_bit = _master_bit, \ + .grp_index = _grp_index, \ + .int_en_bit = _int_bit, \ + .mask_reg_index = _mask_ind, \ + } + +static const struct rc5t583_irq_data rc5t583_irqs[RC5T583_MAX_IRQS] = { + [RC5T583_IRQ_ONKEY] = RC5T583_IRQ(SYS_INT, 0, 0, 0, 0), + [RC5T583_IRQ_ACOK] = RC5T583_IRQ(SYS_INT, 0, 1, 1, 0), + [RC5T583_IRQ_LIDOPEN] = RC5T583_IRQ(SYS_INT, 0, 2, 2, 0), + [RC5T583_IRQ_PREOT] = RC5T583_IRQ(SYS_INT, 0, 3, 3, 0), + [RC5T583_IRQ_CLKSTP] = RC5T583_IRQ(SYS_INT, 0, 4, 4, 0), + [RC5T583_IRQ_ONKEY_OFF] = RC5T583_IRQ(SYS_INT, 0, 5, 5, 0), + [RC5T583_IRQ_WD] = RC5T583_IRQ(SYS_INT, 0, 7, 7, 0), + [RC5T583_IRQ_EN_PWRREQ1] = RC5T583_IRQ(SYS_INT, 0, 8, 0, 1), + [RC5T583_IRQ_EN_PWRREQ2] = RC5T583_IRQ(SYS_INT, 0, 9, 1, 1), + [RC5T583_IRQ_PRE_VINDET] = RC5T583_IRQ(SYS_INT, 0, 10, 2, 1), + + [RC5T583_IRQ_DC0LIM] = RC5T583_IRQ(DCDC_INT, 1, 0, 0, 2), + [RC5T583_IRQ_DC1LIM] = RC5T583_IRQ(DCDC_INT, 1, 1, 1, 2), + [RC5T583_IRQ_DC2LIM] = RC5T583_IRQ(DCDC_INT, 1, 2, 2, 2), + [RC5T583_IRQ_DC3LIM] = RC5T583_IRQ(DCDC_INT, 1, 3, 3, 2), + + [RC5T583_IRQ_CTC] = RC5T583_IRQ(RTC_INT, 2, 0, 0, 3), + [RC5T583_IRQ_YALE] = RC5T583_IRQ(RTC_INT, 2, 5, 5, 3), + [RC5T583_IRQ_DALE] = RC5T583_IRQ(RTC_INT, 2, 6, 6, 3), + [RC5T583_IRQ_WALE] = RC5T583_IRQ(RTC_INT, 2, 7, 7, 3), + + [RC5T583_IRQ_AIN1L] = RC5T583_IRQ(ADC_INT, 3, 0, 0, 4), + [RC5T583_IRQ_AIN2L] = RC5T583_IRQ(ADC_INT, 3, 1, 1, 4), + [RC5T583_IRQ_AIN3L] = RC5T583_IRQ(ADC_INT, 3, 2, 2, 4), + [RC5T583_IRQ_VBATL] = RC5T583_IRQ(ADC_INT, 3, 3, 3, 4), + [RC5T583_IRQ_VIN3L] = RC5T583_IRQ(ADC_INT, 3, 4, 4, 4), + [RC5T583_IRQ_VIN8L] = RC5T583_IRQ(ADC_INT, 3, 5, 5, 4), + [RC5T583_IRQ_AIN1H] = RC5T583_IRQ(ADC_INT, 3, 6, 0, 5), + [RC5T583_IRQ_AIN2H] = RC5T583_IRQ(ADC_INT, 3, 7, 1, 5), + [RC5T583_IRQ_AIN3H] = RC5T583_IRQ(ADC_INT, 3, 8, 2, 5), + [RC5T583_IRQ_VBATH] = RC5T583_IRQ(ADC_INT, 3, 9, 3, 5), + [RC5T583_IRQ_VIN3H] = RC5T583_IRQ(ADC_INT, 3, 10, 4, 5), + [RC5T583_IRQ_VIN8H] = RC5T583_IRQ(ADC_INT, 3, 11, 5, 5), + [RC5T583_IRQ_ADCEND] = RC5T583_IRQ(ADC_INT, 3, 12, 0, 6), + + [RC5T583_IRQ_GPIO0] = RC5T583_IRQ(GPIO_INT, 4, 0, 0, 7), + [RC5T583_IRQ_GPIO1] = RC5T583_IRQ(GPIO_INT, 4, 1, 1, 7), + [RC5T583_IRQ_GPIO2] = RC5T583_IRQ(GPIO_INT, 4, 2, 2, 7), + [RC5T583_IRQ_GPIO3] = RC5T583_IRQ(GPIO_INT, 4, 3, 3, 7), + [RC5T583_IRQ_GPIO4] = RC5T583_IRQ(GPIO_INT, 4, 4, 4, 7), + [RC5T583_IRQ_GPIO5] = RC5T583_IRQ(GPIO_INT, 4, 5, 5, 7), + [RC5T583_IRQ_GPIO6] = RC5T583_IRQ(GPIO_INT, 4, 6, 6, 7), + [RC5T583_IRQ_GPIO7] = RC5T583_IRQ(GPIO_INT, 4, 7, 7, 7), +}; + +static void rc5t583_irq_lock(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + mutex_lock(&rc5t583->irq_lock); +} + +static void rc5t583_irq_unmask(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + + rc5t583->group_irq_en[data->grp_index] |= 1 << data->grp_index; + rc5t583->intc_inten_reg |= 1 << data->master_bit; + rc5t583->irq_en_reg[data->mask_reg_index] |= 1 << data->int_en_bit; +} + +static void rc5t583_irq_mask(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + + rc5t583->group_irq_en[data->grp_index] &= ~(1 << data->grp_index); + if (!rc5t583->group_irq_en[data->grp_index]) + rc5t583->intc_inten_reg &= ~(1 << data->master_bit); + + rc5t583->irq_en_reg[data->mask_reg_index] &= ~(1 << data->int_en_bit); +} + +static int rc5t583_irq_set_type(struct irq_data *irq_data, unsigned int type) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + int val = 0; + int gpedge_index; + int gpedge_bit_pos; + + /* Supporting only trigger level inetrrupt */ + if ((data->int_type & GPIO_INT) && (type & IRQ_TYPE_EDGE_BOTH)) { + gpedge_index = data->int_en_bit / 4; + gpedge_bit_pos = data->int_en_bit % 4; + + if (type & IRQ_TYPE_EDGE_FALLING) + val |= 0x2; + + if (type & IRQ_TYPE_EDGE_RISING) + val |= 0x1; + + rc5t583->gpedge_reg[gpedge_index] &= ~(3 << gpedge_bit_pos); + rc5t583->gpedge_reg[gpedge_index] |= (val << gpedge_bit_pos); + rc5t583_irq_unmask(irq_data); + return 0; + } + return -EINVAL; +} + +static void rc5t583_irq_sync_unlock(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(rc5t583->gpedge_reg); i++) { + ret = rc5t583_write(rc5t583->dev, gpedge_add[i], + rc5t583->gpedge_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + gpedge_add[i], ret); + } + + for (i = 0; i < ARRAY_SIZE(rc5t583->irq_en_reg); i++) { + ret = rc5t583_write(rc5t583->dev, irq_en_add[i], + rc5t583->irq_en_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_en_add[i], ret); + } + + ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, + rc5t583->intc_inten_reg); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + RC5T583_INTC_INTEN, ret); + + mutex_unlock(&rc5t583->irq_lock); +} +#ifdef CONFIG_PM_SLEEP +static int rc5t583_irq_set_wake(struct irq_data *irq_data, unsigned int on) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + return irq_set_irq_wake(rc5t583->chip_irq, on); +} +#else +#define rc5t583_irq_set_wake NULL +#endif + +static irqreturn_t rc5t583_irq(int irq, void *data) +{ + struct rc5t583 *rc5t583 = data; + uint8_t int_sts[RC5T583_MAX_INTERRUPT_MASK_REGS]; + uint8_t master_int; + int i; + int ret; + unsigned int rtc_int_sts = 0; + + /* Clear the status */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) + int_sts[i] = 0; + + ret = rc5t583_read(rc5t583->dev, RC5T583_INTC_INTMON, &master_int); + if (ret < 0) { + dev_err(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + RC5T583_INTC_INTMON, ret); + return IRQ_HANDLED; + } + + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; ++i) { + if (!(master_int & main_int_type[i])) + continue; + + ret = rc5t583_read(rc5t583->dev, irq_mon_add[i], &int_sts[i]); + if (ret < 0) { + dev_warn(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + irq_mon_add[i], ret); + int_sts[i] = 0; + continue; + } + + if (main_int_type[i] & RTC_INT) { + rtc_int_sts = 0; + if (int_sts[i] & 0x1) + rtc_int_sts |= BIT(6); + if (int_sts[i] & 0x2) + rtc_int_sts |= BIT(7); + if (int_sts[i] & 0x4) + rtc_int_sts |= BIT(0); + if (int_sts[i] & 0x8) + rtc_int_sts |= BIT(5); + } + + ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], + ~int_sts[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + irq_clr_add[i], ret); + + if (main_int_type[i] & RTC_INT) + int_sts[i] = rtc_int_sts; + } + + /* Merge gpio interrupts for rising and falling case*/ + int_sts[7] |= int_sts[8]; + + /* Call interrupt handler if enabled */ + for (i = 0; i < RC5T583_MAX_IRQS; ++i) { + const struct rc5t583_irq_data *data = &rc5t583_irqs[i]; + if ((int_sts[data->mask_reg_index] & (1 << data->int_en_bit)) && + (rc5t583->group_irq_en[data->master_bit] & + (1 << data->grp_index))) + handle_nested_irq(rc5t583->irq_base + i); + } + + return IRQ_HANDLED; +} + +static struct irq_chip rc5t583_irq_chip = { + .name = "rc5t583-irq", + .irq_mask = rc5t583_irq_mask, + .irq_unmask = rc5t583_irq_unmask, + .irq_bus_lock = rc5t583_irq_lock, + .irq_bus_sync_unlock = rc5t583_irq_sync_unlock, + .irq_set_type = rc5t583_irq_set_type, + .irq_set_wake = rc5t583_irq_set_wake, +}; + +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base) +{ + int i, ret; + + if (!irq_base) { + dev_warn(rc5t583->dev, "No interrupt support on IRQ base\n"); + return -EINVAL; + } + + mutex_init(&rc5t583->irq_lock); + + /* Initailize all int register to 0 */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) { + ret = rc5t583_write(rc5t583->dev, irq_en_add[i], + rc5t583->irq_en_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_en_add[i], ret); + } + + for (i = 0; i < RC5T583_MAX_GPEDGE_REG; i++) { + ret = rc5t583_write(rc5t583->dev, gpedge_add[i], + rc5t583->gpedge_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + gpedge_add[i], ret); + } + + ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + RC5T583_INTC_INTEN, ret); + + /* Clear all interrupts in case they woke up active. */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) { + ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], 0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_clr_add[i], ret); + } + + rc5t583->irq_base = irq_base; + rc5t583->chip_irq = irq; + + for (i = 0; i < RC5T583_MAX_IRQS; i++) { + int __irq = i + rc5t583->irq_base; + irq_set_chip_data(__irq, rc5t583); + irq_set_chip_and_handler(__irq, &rc5t583_irq_chip, + handle_simple_irq); + irq_set_nested_thread(__irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(__irq, IRQF_VALID); +#endif + } + + ret = request_threaded_irq(irq, NULL, rc5t583_irq, IRQF_ONESHOT, + "rc5t583", rc5t583); + if (ret < 0) + dev_err(rc5t583->dev, + "Error in registering interrupt error: %d\n", ret); + return ret; +} + +int rc5t583_irq_exit(struct rc5t583 *rc5t583) +{ + if (rc5t583->chip_irq) + free_irq(rc5t583->chip_irq, rc5t583); + return 0; +} diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c new file mode 100644 index 0000000..99ef944 --- /dev/null +++ b/drivers/mfd/rc5t583.c @@ -0,0 +1,386 @@ +/* + * Core driver access RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/rc5t583.h> +#include <linux/regmap.h> + +#define RICOH_ONOFFSEL_REG 0x10 +#define RICOH_SWCTL_REG 0x5E + +struct deepsleep_control_data { + u8 reg_add; + u8 ds_pos_bit; +}; + +#define DEEPSLEEP_INIT(_id, _reg, _pos) \ + { \ + .reg_add = RC5T583_##_reg, \ + .ds_pos_bit = _pos, \ + } + +static struct deepsleep_control_data deepsleep_data[] = { + DEEPSLEEP_INIT(DC0, SLPSEQ1, 0), + DEEPSLEEP_INIT(DC1, SLPSEQ1, 4), + DEEPSLEEP_INIT(DC2, SLPSEQ2, 0), + DEEPSLEEP_INIT(DC3, SLPSEQ2, 4), + DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0), + DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4), + DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0), + DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4), + DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0), + DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4), + DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0), + DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4), + DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0), + DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4), + DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0), + DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4), + DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0), + DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4), + DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0), + DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4), + DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0), + DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4), +}; + +#define EXT_PWR_REQ \ + (RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL) + +static struct mfd_cell rc5t583_subdevs[] = { + {.name = "rc5t583-regulator",}, + {.name = "rc5t583-rtc", }, + {.name = "rc5t583-key", } +}; + +int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_write(rc5t583->regmap, reg, val); +} + +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + ret = regmap_read(rc5t583->regmap, reg, &ival); + if (!ret) + *val = (uint8_t)ival; + return ret; +} + +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); +} + +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); +} + +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, mask, val); +} + +static int __rc5t583_set_ext_pwrreq1_control(struct device *dev, + int id, int ext_pwr, int slots) +{ + int ret; + uint8_t sleepseq_val; + unsigned int en_bit; + unsigned int slot_bit; + + if (id == RC5T583_DS_DC0) { + dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id); + return -EINVAL; + } + + en_bit = deepsleep_data[id].ds_pos_bit; + slot_bit = en_bit + 1; + ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val); + if (ret < 0) { + dev_err(dev, "Error in reading reg 0x%x\n", + deepsleep_data[id].reg_add); + return ret; + } + + sleepseq_val &= ~(0xF << en_bit); + sleepseq_val |= BIT(en_bit); + sleepseq_val |= ((slots & 0x7) << slot_bit); + ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1)); + if (ret < 0) { + dev_err(dev, "Error in updating the 0x%02x register\n", + RICOH_ONOFFSEL_REG); + return ret; + } + + ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val); + if (ret < 0) { + dev_err(dev, "Error in writing reg 0x%x\n", + deepsleep_data[id].reg_add); + return ret; + } + + if (id == RC5T583_DS_LDO4) { + ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1); + if (ret < 0) + dev_err(dev, "Error in writing reg 0x%x\n", + RICOH_SWCTL_REG); + } + return ret; +} + +static int __rc5t583_set_ext_pwrreq2_control(struct device *dev, + int id, int ext_pwr) +{ + int ret; + + if (id != RC5T583_DS_DC0) { + dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id); + return -EINVAL; + } + + ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2)); + if (ret < 0) + dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n"); + return ret; +} + +int rc5t583_ext_power_req_config(struct device *dev, int ds_id, + int ext_pwr_req, int deepsleep_slot_nr) +{ + if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ) + return -EINVAL; + + if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL) + return __rc5t583_set_ext_pwrreq1_control(dev, ds_id, + ext_pwr_req, deepsleep_slot_nr); + + if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL) + return __rc5t583_set_ext_pwrreq2_control(dev, + ds_id, ext_pwr_req); + return 0; +} + +static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583, + struct rc5t583_platform_data *pdata) +{ + int ret; + int i; + uint8_t on_off_val = 0; + + /* Clear ONOFFSEL register */ + if (pdata->enable_shutdown) + on_off_val = 0x1; + + ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val); + if (ret < 0) + dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n", + RICOH_ONOFFSEL_REG, ret); + + ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n", + RICOH_SWCTL_REG, ret); + + /* Clear sleep sequence register */ + for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) { + ret = rc5t583_write(rc5t583->dev, i, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + i, ret); + } + return 0; +} + +static bool volatile_reg(struct device *dev, unsigned int reg) +{ + /* Enable caching in interrupt registers */ + switch (reg) { + case RC5T583_INT_EN_SYS1: + case RC5T583_INT_EN_SYS2: + case RC5T583_INT_EN_DCDC: + case RC5T583_INT_EN_RTC: + case RC5T583_INT_EN_ADC1: + case RC5T583_INT_EN_ADC2: + case RC5T583_INT_EN_ADC3: + case RC5T583_GPIO_GPEDGE1: + case RC5T583_GPIO_GPEDGE2: + case RC5T583_GPIO_EN_INT: + return false; + + case RC5T583_GPIO_MON_IOIN: + /* This is gpio input register */ + return true; + + default: + /* Enable caching in gpio registers */ + if ((reg >= RC5T583_GPIO_IOSEL) && + (reg <= RC5T583_GPIO_GPOFUNC)) + return false; + + /* Enable caching in sleep seq registers */ + if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11)) + return false; + + /* Enable caching of regulator registers */ + if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL)) + return false; + if ((reg >= RC5T583_REG_LDOEN1) && + (reg <= RC5T583_REG_LDO9DAC_DS)) + return false; + + break; + } + + return true; +} + +static const struct regmap_config rc5t583_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = volatile_reg, + .max_register = RC5T583_MAX_REGS, + .num_reg_defaults_raw = RC5T583_MAX_REGS, + .cache_type = REGCACHE_RBTREE, +}; + +static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rc5t583 *rc5t583; + struct rc5t583_platform_data *pdata = i2c->dev.platform_data; + int ret; + bool irq_init_success = false; + + if (!pdata) { + dev_err(&i2c->dev, "Err: Platform data not found\n"); + return -EINVAL; + } + + rc5t583 = devm_kzalloc(&i2c->dev, sizeof(struct rc5t583), GFP_KERNEL); + if (!rc5t583) { + dev_err(&i2c->dev, "Memory allocation failed\n"); + return -ENOMEM; + } + + rc5t583->dev = &i2c->dev; + i2c_set_clientdata(i2c, rc5t583); + + rc5t583->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config); + if (IS_ERR(rc5t583->regmap)) { + ret = PTR_ERR(rc5t583->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + return ret; + } + + ret = rc5t583_clear_ext_power_req(rc5t583, pdata); + if (ret < 0) + goto err_irq_init; + + if (i2c->irq) { + ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base); + /* Still continue with waring if irq init fails */ + if (ret) + dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret); + else + irq_init_success = true; + } + + ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs, + ARRAY_SIZE(rc5t583_subdevs), NULL, 0); + if (ret) { + dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret); + goto err_add_devs; + } + + return 0; + +err_add_devs: + if (irq_init_success) + rc5t583_irq_exit(rc5t583); +err_irq_init: + regmap_exit(rc5t583->regmap); + return ret; +} + +static int __devexit rc5t583_i2c_remove(struct i2c_client *i2c) +{ + struct rc5t583 *rc5t583 = i2c_get_clientdata(i2c); + + mfd_remove_devices(rc5t583->dev); + rc5t583_irq_exit(rc5t583); + regmap_exit(rc5t583->regmap); + return 0; +} + +static const struct i2c_device_id rc5t583_i2c_id[] = { + {.name = "rc5t583", .driver_data = 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, rc5t583_i2c_id); + +static struct i2c_driver rc5t583_i2c_driver = { + .driver = { + .name = "rc5t583", + .owner = THIS_MODULE, + }, + .probe = rc5t583_i2c_probe, + .remove = __devexit_p(rc5t583_i2c_remove), + .id_table = rc5t583_i2c_id, +}; + +static int __init rc5t583_i2c_init(void) +{ + return i2c_add_driver(&rc5t583_i2c_driver); +} +subsys_initcall(rc5t583_i2c_init); + +static void __exit rc5t583_i2c_exit(void) +{ + i2c_del_driver(&rc5t583_i2c_driver); +} + +module_exit(rc5t583_i2c_exit); + +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_DESCRIPTION("RICOH RC5T583 power management system device driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/s5m-core.c b/drivers/mfd/s5m-core.c index caadabe..48949d9 100644 --- a/drivers/mfd/s5m-core.c +++ b/drivers/mfd/s5m-core.c @@ -26,7 +26,27 @@ #include <linux/mfd/s5m87xx/s5m-rtc.h> #include <linux/regmap.h> -static struct mfd_cell s5m87xx_devs[] = { +static struct mfd_cell s5m8751_devs[] = { + { + .name = "s5m8751-pmic", + }, { + .name = "s5m-charger", + }, { + .name = "s5m8751-codec", + }, +}; + +static struct mfd_cell s5m8763_devs[] = { + { + .name = "s5m8763-pmic", + }, { + .name = "s5m-rtc", + }, { + .name = "s5m-charger", + }, +}; + +static struct mfd_cell s5m8767_devs[] = { { .name = "s5m8767-pmic", }, { @@ -42,7 +62,7 @@ EXPORT_SYMBOL_GPL(s5m_reg_read); int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf) { - return regmap_bulk_read(s5m87xx->regmap, reg, buf, count);; + return regmap_bulk_read(s5m87xx->regmap, reg, buf, count); } EXPORT_SYMBOL_GPL(s5m_bulk_read); @@ -54,7 +74,7 @@ EXPORT_SYMBOL_GPL(s5m_reg_write); int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf) { - return regmap_raw_write(s5m87xx->regmap, reg, buf, count * sizeof(u16)); + return regmap_raw_write(s5m87xx->regmap, reg, buf, count); } EXPORT_SYMBOL_GPL(s5m_bulk_write); @@ -74,10 +94,10 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c, { struct s5m_platform_data *pdata = i2c->dev.platform_data; struct s5m87xx_dev *s5m87xx; - int ret = 0; - int error; + int ret; - s5m87xx = kzalloc(sizeof(struct s5m87xx_dev), GFP_KERNEL); + s5m87xx = devm_kzalloc(&i2c->dev, sizeof(struct s5m87xx_dev), + GFP_KERNEL); if (s5m87xx == NULL) return -ENOMEM; @@ -96,9 +116,9 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c, s5m87xx->regmap = regmap_init_i2c(i2c, &s5m_regmap_config); if (IS_ERR(s5m87xx->regmap)) { - error = PTR_ERR(s5m87xx->regmap); + ret = PTR_ERR(s5m87xx->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", - error); + ret); goto err; } @@ -112,9 +132,23 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c, pm_runtime_set_active(s5m87xx->dev); - ret = mfd_add_devices(s5m87xx->dev, -1, - s5m87xx_devs, ARRAY_SIZE(s5m87xx_devs), - NULL, 0); + switch (s5m87xx->device_type) { + case S5M8751X: + ret = mfd_add_devices(s5m87xx->dev, -1, s5m8751_devs, + ARRAY_SIZE(s5m8751_devs), NULL, 0); + break; + case S5M8763X: + ret = mfd_add_devices(s5m87xx->dev, -1, s5m8763_devs, + ARRAY_SIZE(s5m8763_devs), NULL, 0); + break; + case S5M8767X: + ret = mfd_add_devices(s5m87xx->dev, -1, s5m8767_devs, + ARRAY_SIZE(s5m8767_devs), NULL, 0); + break; + default: + /* If this happens the probe function is problem */ + BUG(); + } if (ret < 0) goto err; @@ -126,7 +160,6 @@ err: s5m_irq_exit(s5m87xx); i2c_unregister_device(s5m87xx->rtc); regmap_exit(s5m87xx->regmap); - kfree(s5m87xx); return ret; } @@ -138,7 +171,6 @@ static int s5m87xx_i2c_remove(struct i2c_client *i2c) s5m_irq_exit(s5m87xx); i2c_unregister_device(s5m87xx->rtc); regmap_exit(s5m87xx->regmap); - kfree(s5m87xx); return 0; } diff --git a/drivers/mfd/s5m-irq.c b/drivers/mfd/s5m-irq.c index de76dfb..0236676 100644 --- a/drivers/mfd/s5m-irq.c +++ b/drivers/mfd/s5m-irq.c @@ -342,7 +342,10 @@ int s5m_irq_resume(struct s5m87xx_dev *s5m87xx) s5m8767_irq_thread(s5m87xx->irq_base, s5m87xx); break; default: - break; + dev_err(s5m87xx->dev, + "Unknown device type %d\n", + s5m87xx->device_type); + return -EINVAL; } } @@ -444,7 +447,9 @@ int s5m_irq_init(struct s5m87xx_dev *s5m87xx) } break; default: - break; + dev_err(s5m87xx->dev, + "Unknown device type %d\n", s5m87xx->device_type); + return -EINVAL; } if (!s5m87xx->ono) @@ -467,12 +472,15 @@ int s5m_irq_init(struct s5m87xx_dev *s5m87xx) IRQF_ONESHOT, "s5m87xx-ono", s5m87xx); break; default: + ret = -EINVAL; break; } - if (ret) + if (ret) { dev_err(s5m87xx->dev, "Failed to request IRQ %d: %d\n", s5m87xx->ono, ret); + return ret; + } return 0; } diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index f4d8611..d927dd4 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -387,14 +387,6 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to) EXPORT_SYMBOL_GPL(sm501_unit_power); - -/* Perform a rounded division. */ -static long sm501fb_round_div(long num, long denom) -{ - /* n / d + 1 / 2 = (2n + d) / 2d */ - return (2 * num + denom) / (2 * denom); -} - /* clock value structure. */ struct sm501_clock { unsigned long mclk; @@ -428,7 +420,7 @@ static int sm501_calc_clock(unsigned long freq, /* try all 8 shift values.*/ for (shift = 0; shift < 8; shift++) { /* Calculate difference to requested clock */ - diff = sm501fb_round_div(mclk, divider << shift) - freq; + diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq; if (diff < 0) diff = -diff; diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index e07947e..2dd8d49 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -298,6 +298,11 @@ static struct mfd_cell stmpe_gpio_cell = { .num_resources = ARRAY_SIZE(stmpe_gpio_resources), }; +static struct mfd_cell stmpe_gpio_cell_noirq = { + .name = "stmpe-gpio", + /* gpio cell resources consist of an irq only so no resources here */ +}; + /* * Keypad (1601, 2401, 2403) */ @@ -346,6 +351,13 @@ static struct stmpe_variant_block stmpe801_blocks[] = { }, }; +static struct stmpe_variant_block stmpe801_blocks_noirq[] = { + { + .cell = &stmpe_gpio_cell_noirq, + .block = STMPE_BLOCK_GPIO, + }, +}; + static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks, bool enable) { @@ -367,6 +379,17 @@ static struct stmpe_variant_info stmpe801 = { .enable = stmpe801_enable, }; +static struct stmpe_variant_info stmpe801_noirq = { + .name = "stmpe801", + .id_val = STMPE801_ID, + .id_mask = 0xffff, + .num_gpios = 8, + .regs = stmpe801_regs, + .blocks = stmpe801_blocks_noirq, + .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq), + .enable = stmpe801_enable, +}; + /* * Touchscreen (STMPE811 or STMPE610) */ @@ -712,7 +735,7 @@ static struct stmpe_variant_info stmpe2403 = { .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */ }; -static struct stmpe_variant_info *stmpe_variant_info[] = { +static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = { [STMPE610] = &stmpe610, [STMPE801] = &stmpe801, [STMPE811] = &stmpe811, @@ -721,6 +744,16 @@ static struct stmpe_variant_info *stmpe_variant_info[] = { [STMPE2403] = &stmpe2403, }; +/* + * These devices can be connected in a 'no-irq' configuration - the irq pin + * is not used and the device cannot interrupt the CPU. Here we only list + * devices which support this configuration - the driver will fail probing + * for any devices not listed here which are configured in this way. + */ +static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = { + [STMPE801] = &stmpe801_noirq, +}; + static irqreturn_t stmpe_irq(int irq, void *data) { struct stmpe *stmpe = data; @@ -864,7 +897,7 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe) unsigned int irq_trigger = stmpe->pdata->irq_trigger; int autosleep_timeout = stmpe->pdata->autosleep_timeout; struct stmpe_variant_info *variant = stmpe->variant; - u8 icr; + u8 icr = 0; unsigned int id; u8 data[2]; int ret; @@ -887,31 +920,33 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe) if (ret) return ret; - if (id == STMPE801_ID) - icr = STMPE801_REG_SYS_CTRL_INT_EN; - else - icr = STMPE_ICR_LSB_GIM; - - /* STMPE801 doesn't support Edge interrupts */ - if (id != STMPE801_ID) { - if (irq_trigger == IRQF_TRIGGER_FALLING || - irq_trigger == IRQF_TRIGGER_RISING) - icr |= STMPE_ICR_LSB_EDGE; - } - - if (irq_trigger == IRQF_TRIGGER_RISING || - irq_trigger == IRQF_TRIGGER_HIGH) { + if (stmpe->irq >= 0) { if (id == STMPE801_ID) - icr |= STMPE801_REG_SYS_CTRL_INT_HI; + icr = STMPE801_REG_SYS_CTRL_INT_EN; else - icr |= STMPE_ICR_LSB_HIGH; - } + icr = STMPE_ICR_LSB_GIM; - if (stmpe->pdata->irq_invert_polarity) { - if (id == STMPE801_ID) - icr ^= STMPE801_REG_SYS_CTRL_INT_HI; - else - icr ^= STMPE_ICR_LSB_HIGH; + /* STMPE801 doesn't support Edge interrupts */ + if (id != STMPE801_ID) { + if (irq_trigger == IRQF_TRIGGER_FALLING || + irq_trigger == IRQF_TRIGGER_RISING) + icr |= STMPE_ICR_LSB_EDGE; + } + + if (irq_trigger == IRQF_TRIGGER_RISING || + irq_trigger == IRQF_TRIGGER_HIGH) { + if (id == STMPE801_ID) + icr |= STMPE801_REG_SYS_CTRL_INT_HI; + else + icr |= STMPE_ICR_LSB_HIGH; + } + + if (stmpe->pdata->irq_invert_polarity) { + if (id == STMPE801_ID) + icr ^= STMPE801_REG_SYS_CTRL_INT_HI; + else + icr ^= STMPE_ICR_LSB_HIGH; + } } if (stmpe->pdata->autosleep) { @@ -1001,19 +1036,38 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum) stmpe->irq = ci->irq; } + if (stmpe->irq < 0) { + /* use alternate variant info for no-irq mode, if supported */ + dev_info(stmpe->dev, + "%s configured in no-irq mode by platform data\n", + stmpe->variant->name); + if (!stmpe_noirq_variant_info[stmpe->partnum]) { + dev_err(stmpe->dev, + "%s does not support no-irq mode!\n", + stmpe->variant->name); + ret = -ENODEV; + goto free_gpio; + } + stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum]; + } + ret = stmpe_chip_init(stmpe); if (ret) goto free_gpio; - ret = stmpe_irq_init(stmpe); - if (ret) - goto free_gpio; + if (stmpe->irq >= 0) { + ret = stmpe_irq_init(stmpe); + if (ret) + goto free_gpio; - ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq, - pdata->irq_trigger | IRQF_ONESHOT, "stmpe", stmpe); - if (ret) { - dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret); - goto out_removeirq; + ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq, + pdata->irq_trigger | IRQF_ONESHOT, + "stmpe", stmpe); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ: %d\n", + ret); + goto out_removeirq; + } } ret = stmpe_devices_init(stmpe); @@ -1026,9 +1080,11 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum) out_removedevs: mfd_remove_devices(stmpe->dev); - free_irq(stmpe->irq, stmpe); + if (stmpe->irq >= 0) + free_irq(stmpe->irq, stmpe); out_removeirq: - stmpe_irq_remove(stmpe); + if (stmpe->irq >= 0) + stmpe_irq_remove(stmpe); free_gpio: if (pdata->irq_over_gpio) gpio_free(pdata->irq_gpio); @@ -1041,8 +1097,10 @@ int stmpe_remove(struct stmpe *stmpe) { mfd_remove_devices(stmpe->dev); - free_irq(stmpe->irq, stmpe); - stmpe_irq_remove(stmpe); + if (stmpe->irq >= 0) { + free_irq(stmpe->irq, stmpe); + stmpe_irq_remove(stmpe); + } if (stmpe->pdata->irq_over_gpio) gpio_free(stmpe->pdata->irq_gpio); @@ -1057,7 +1115,7 @@ static int stmpe_suspend(struct device *dev) { struct stmpe *stmpe = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) + if (stmpe->irq >= 0 && device_may_wakeup(dev)) enable_irq_wake(stmpe->irq); return 0; @@ -1067,7 +1125,7 @@ static int stmpe_resume(struct device *dev) { struct stmpe *stmpe = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) + if (stmpe->irq >= 0 && device_may_wakeup(dev)) disable_irq_wake(stmpe->irq); return 0; diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c new file mode 100644 index 0000000..a66d4df --- /dev/null +++ b/drivers/mfd/tps65090.c @@ -0,0 +1,387 @@ +/* + * Core driver for TI TPS65090 PMIC family + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tps65090.h> +#include <linux/regmap.h> +#include <linux/err.h> + +#define NUM_INT_REG 2 +#define TOTAL_NUM_REG 0x18 + +/* interrupt status registers */ +#define TPS65090_INT_STS 0x0 +#define TPS65090_INT_STS2 0x1 + +/* interrupt mask registers */ +#define TPS65090_INT_MSK 0x2 +#define TPS65090_INT_MSK2 0x3 + +struct tps65090_irq_data { + u8 mask_reg; + u8 mask_pos; +}; + +#define TPS65090_IRQ(_reg, _mask_pos) \ + { \ + .mask_reg = (_reg), \ + .mask_pos = (_mask_pos), \ + } + +static const struct tps65090_irq_data tps65090_irqs[] = { + [0] = TPS65090_IRQ(0, 0), + [1] = TPS65090_IRQ(0, 1), + [2] = TPS65090_IRQ(0, 2), + [3] = TPS65090_IRQ(0, 3), + [4] = TPS65090_IRQ(0, 4), + [5] = TPS65090_IRQ(0, 5), + [6] = TPS65090_IRQ(0, 6), + [7] = TPS65090_IRQ(0, 7), + [8] = TPS65090_IRQ(1, 0), + [9] = TPS65090_IRQ(1, 1), + [10] = TPS65090_IRQ(1, 2), + [11] = TPS65090_IRQ(1, 3), + [12] = TPS65090_IRQ(1, 4), + [13] = TPS65090_IRQ(1, 5), + [14] = TPS65090_IRQ(1, 6), + [15] = TPS65090_IRQ(1, 7), +}; + +static struct mfd_cell tps65090s[] = { + { + .name = "tps65910-pmic", + }, + { + .name = "tps65910-regulator", + }, +}; + +struct tps65090 { + struct mutex lock; + struct device *dev; + struct i2c_client *client; + struct regmap *rmap; + struct irq_chip irq_chip; + struct mutex irq_lock; + int irq_base; + unsigned int id; +}; + +int tps65090_write(struct device *dev, int reg, uint8_t val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_write(tps->rmap, reg, val); +} +EXPORT_SYMBOL_GPL(tps65090_write); + +int tps65090_read(struct device *dev, int reg, uint8_t *val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + unsigned int temp_val; + int ret; + ret = regmap_read(tps->rmap, reg, &temp_val); + if (!ret) + *val = temp_val; + return ret; +} +EXPORT_SYMBOL_GPL(tps65090_read); + +int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), ~0u); +} +EXPORT_SYMBOL_GPL(tps65090_set_bits); + +int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), 0u); +} +EXPORT_SYMBOL_GPL(tps65090_clr_bits); + +static void tps65090_irq_lock(struct irq_data *data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(data); + + mutex_lock(&tps65090->irq_lock); +} + +static void tps65090_irq_mask(struct irq_data *irq_data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->hwirq; + const struct tps65090_irq_data *data = &tps65090_irqs[__irq]; + + tps65090_set_bits(tps65090->dev, (TPS65090_INT_MSK + data->mask_reg), + data->mask_pos); +} + +static void tps65090_irq_unmask(struct irq_data *irq_data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - tps65090->irq_base; + const struct tps65090_irq_data *data = &tps65090_irqs[__irq]; + + tps65090_clr_bits(tps65090->dev, (TPS65090_INT_MSK + data->mask_reg), + data->mask_pos); +} + +static void tps65090_irq_sync_unlock(struct irq_data *data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(data); + + mutex_unlock(&tps65090->irq_lock); +} + +static irqreturn_t tps65090_irq(int irq, void *data) +{ + struct tps65090 *tps65090 = data; + int ret = 0; + u8 status, mask; + unsigned long int acks = 0; + int i; + + for (i = 0; i < NUM_INT_REG; i++) { + ret = tps65090_read(tps65090->dev, TPS65090_INT_MSK + i, &mask); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to read mask reg [addr:%d]\n", + TPS65090_INT_MSK + i); + return IRQ_NONE; + } + ret = tps65090_read(tps65090->dev, TPS65090_INT_STS + i, + &status); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to read status reg [addr:%d]\n", + TPS65090_INT_STS + i); + return IRQ_NONE; + } + if (status) { + /* Ack only those interrupts which are not masked */ + status &= (~mask); + ret = tps65090_write(tps65090->dev, + TPS65090_INT_STS + i, status); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to write interrupt status\n"); + return IRQ_NONE; + } + acks |= (status << (i * 8)); + } + } + + for_each_set_bit(i, &acks, ARRAY_SIZE(tps65090_irqs)) + handle_nested_irq(tps65090->irq_base + i); + return acks ? IRQ_HANDLED : IRQ_NONE; +} + +static int __devinit tps65090_irq_init(struct tps65090 *tps65090, int irq, + int irq_base) +{ + int i, ret; + + if (!irq_base) { + dev_err(tps65090->dev, "IRQ base not set\n"); + return -EINVAL; + } + + mutex_init(&tps65090->irq_lock); + + for (i = 0; i < NUM_INT_REG; i++) + tps65090_write(tps65090->dev, TPS65090_INT_MSK + i, 0xFF); + + for (i = 0; i < NUM_INT_REG; i++) + tps65090_write(tps65090->dev, TPS65090_INT_STS + i, 0xff); + + tps65090->irq_base = irq_base; + tps65090->irq_chip.name = "tps65090"; + tps65090->irq_chip.irq_mask = tps65090_irq_mask; + tps65090->irq_chip.irq_unmask = tps65090_irq_unmask; + tps65090->irq_chip.irq_bus_lock = tps65090_irq_lock; + tps65090->irq_chip.irq_bus_sync_unlock = tps65090_irq_sync_unlock; + + for (i = 0; i < ARRAY_SIZE(tps65090_irqs); i++) { + int __irq = i + tps65090->irq_base; + irq_set_chip_data(__irq, tps65090); + irq_set_chip_and_handler(__irq, &tps65090->irq_chip, + handle_simple_irq); + irq_set_nested_thread(__irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(__irq, IRQF_VALID); +#endif + } + + ret = request_threaded_irq(irq, NULL, tps65090_irq, IRQF_ONESHOT, + "tps65090", tps65090); + if (!ret) { + device_init_wakeup(tps65090->dev, 1); + enable_irq_wake(irq); + } + + return ret; +} + +static bool is_volatile_reg(struct device *dev, unsigned int reg) +{ + if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS)) + return true; + else + return false; +} + +static const struct regmap_config tps65090_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TOTAL_NUM_REG, + .num_reg_defaults_raw = TOTAL_NUM_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = is_volatile_reg, +}; + +static int __devinit tps65090_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tps65090_platform_data *pdata = client->dev.platform_data; + struct tps65090 *tps65090; + int ret; + + if (!pdata) { + dev_err(&client->dev, "tps65090 requires platform data\n"); + return -EINVAL; + } + + tps65090 = devm_kzalloc(&client->dev, sizeof(struct tps65090), + GFP_KERNEL); + if (tps65090 == NULL) + return -ENOMEM; + + tps65090->client = client; + tps65090->dev = &client->dev; + i2c_set_clientdata(client, tps65090); + + mutex_init(&tps65090->lock); + + if (client->irq) { + ret = tps65090_irq_init(tps65090, client->irq, pdata->irq_base); + if (ret) { + dev_err(&client->dev, "IRQ init failed with err: %d\n", + ret); + goto err_exit; + } + } + + tps65090->rmap = regmap_init_i2c(tps65090->client, + &tps65090_regmap_config); + if (IS_ERR(tps65090->rmap)) { + dev_err(&client->dev, "regmap_init failed with err: %ld\n", + PTR_ERR(tps65090->rmap)); + goto err_irq_exit; + }; + + ret = mfd_add_devices(tps65090->dev, -1, tps65090s, + ARRAY_SIZE(tps65090s), NULL, 0); + if (ret) { + dev_err(&client->dev, "add mfd devices failed with err: %d\n", + ret); + goto err_regmap_exit; + } + + return 0; + +err_regmap_exit: + regmap_exit(tps65090->rmap); + +err_irq_exit: + if (client->irq) + free_irq(client->irq, tps65090); +err_exit: + return ret; +} + +static int __devexit tps65090_i2c_remove(struct i2c_client *client) +{ + struct tps65090 *tps65090 = i2c_get_clientdata(client); + + mfd_remove_devices(tps65090->dev); + regmap_exit(tps65090->rmap); + if (client->irq) + free_irq(client->irq, tps65090); + + return 0; +} + +#ifdef CONFIG_PM +static int tps65090_i2c_suspend(struct i2c_client *client, pm_message_t state) +{ + if (client->irq) + disable_irq(client->irq); + return 0; +} + +static int tps65090_i2c_resume(struct i2c_client *client) +{ + if (client->irq) + enable_irq(client->irq); + return 0; +} +#endif + +static const struct i2c_device_id tps65090_id_table[] = { + { "tps65090", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tps65090_id_table); + +static struct i2c_driver tps65090_driver = { + .driver = { + .name = "tps65090", + .owner = THIS_MODULE, + }, + .probe = tps65090_i2c_probe, + .remove = __devexit_p(tps65090_i2c_remove), +#ifdef CONFIG_PM + .suspend = tps65090_i2c_suspend, + .resume = tps65090_i2c_resume, +#endif + .id_table = tps65090_id_table, +}; + +static int __init tps65090_init(void) +{ + return i2c_add_driver(&tps65090_driver); +} +subsys_initcall(tps65090_init); + +static void __exit tps65090_exit(void) +{ + i2c_del_driver(&tps65090_driver); +} +module_exit(tps65090_exit); + +MODULE_DESCRIPTION("TPS65090 core driver"); +MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c new file mode 100644 index 0000000..f7d854e --- /dev/null +++ b/drivers/mfd/tps65217.c @@ -0,0 +1,242 @@ +/* + * tps65217.c + * + * TPS65217 chip family multi-function driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/err.h> + +#include <linux/mfd/core.h> +#include <linux/mfd/tps65217.h> + +/** + * tps65217_reg_read: Read a single tps65217 register. + * + * @tps: Device to read from. + * @reg: Register to read. + * @val: Contians the value + */ +int tps65217_reg_read(struct tps65217 *tps, unsigned int reg, + unsigned int *val) +{ + return regmap_read(tps->regmap, reg, val); +} +EXPORT_SYMBOL_GPL(tps65217_reg_read); + +/** + * tps65217_reg_write: Write a single tps65217 register. + * + * @tps65217: Device to write to. + * @reg: Register to write to. + * @val: Value to write. + * @level: Password protected level + */ +int tps65217_reg_write(struct tps65217 *tps, unsigned int reg, + unsigned int val, unsigned int level) +{ + int ret; + unsigned int xor_reg_val; + + switch (level) { + case TPS65217_PROTECT_NONE: + return regmap_write(tps->regmap, reg, val); + case TPS65217_PROTECT_L1: + xor_reg_val = reg ^ TPS65217_PASSWORD_REGS_UNLOCK; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + + return regmap_write(tps->regmap, reg, val); + case TPS65217_PROTECT_L2: + xor_reg_val = reg ^ TPS65217_PASSWORD_REGS_UNLOCK; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + ret = regmap_write(tps->regmap, reg, val); + if (ret < 0) + return ret; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + return regmap_write(tps->regmap, reg, val); + default: + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(tps65217_reg_write); + +/** + * tps65217_update_bits: Modify bits w.r.t mask, val and level. + * + * @tps65217: Device to write to. + * @reg: Register to read-write to. + * @mask: Mask. + * @val: Value to write. + * @level: Password protected level + */ +int tps65217_update_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level) +{ + int ret; + unsigned int data; + + ret = tps65217_reg_read(tps, reg, &data); + if (ret) { + dev_err(tps->dev, "Read from reg 0x%x failed\n", reg); + return ret; + } + + data &= ~mask; + data |= val & mask; + + ret = tps65217_reg_write(tps, reg, data, level); + if (ret) + dev_err(tps->dev, "Write for reg 0x%x failed\n", reg); + + return ret; +} + +int tps65217_set_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level) +{ + return tps65217_update_bits(tps, reg, mask, val, level); +} +EXPORT_SYMBOL_GPL(tps65217_set_bits); + +int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int level) +{ + return tps65217_update_bits(tps, reg, mask, 0, level); +} +EXPORT_SYMBOL_GPL(tps65217_clear_bits); + +static struct regmap_config tps65217_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int __devinit tps65217_probe(struct i2c_client *client, + const struct i2c_device_id *ids) +{ + struct tps65217 *tps; + struct tps65217_board *pdata = client->dev.platform_data; + int i, ret; + unsigned int version; + + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + tps->pdata = pdata; + tps->regmap = regmap_init_i2c(client, &tps65217_regmap_config); + if (IS_ERR(tps->regmap)) { + ret = PTR_ERR(tps->regmap); + dev_err(tps->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + i2c_set_clientdata(client, tps); + tps->dev = &client->dev; + + ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version); + if (ret < 0) { + dev_err(tps->dev, "Failed to read revision" + " register: %d\n", ret); + goto err_regmap; + } + + dev_info(tps->dev, "TPS65217 ID %#x version 1.%d\n", + (version & TPS65217_CHIPID_CHIP_MASK) >> 4, + version & TPS65217_CHIPID_REV_MASK); + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { + struct platform_device *pdev; + + pdev = platform_device_alloc("tps65217-pmic", i); + if (!pdev) { + dev_err(tps->dev, "Cannot create regulator %d\n", i); + continue; + } + + pdev->dev.parent = tps->dev; + platform_device_add_data(pdev, &pdata->tps65217_init_data[i], + sizeof(pdata->tps65217_init_data[i])); + tps->regulator_pdev[i] = pdev; + + platform_device_add(pdev); + } + + return 0; + +err_regmap: + regmap_exit(tps->regmap); + + return ret; +} + +static int __devexit tps65217_remove(struct i2c_client *client) +{ + struct tps65217 *tps = i2c_get_clientdata(client); + int i; + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) + platform_device_unregister(tps->regulator_pdev[i]); + + regmap_exit(tps->regmap); + + return 0; +} + +static const struct i2c_device_id tps65217_id_table[] = { + {"tps65217", 0xF0}, + {/* end of list */} +}; +MODULE_DEVICE_TABLE(i2c, tps65217_id_table); + +static struct i2c_driver tps65217_driver = { + .driver = { + .name = "tps65217", + }, + .id_table = tps65217_id_table, + .probe = tps65217_probe, + .remove = __devexit_p(tps65217_remove), +}; + +static int __init tps65217_init(void) +{ + return i2c_add_driver(&tps65217_driver); +} +subsys_initcall(tps65217_init); + +static void __exit tps65217_exit(void) +{ + i2c_del_driver(&tps65217_driver); +} +module_exit(tps65217_exit); + +MODULE_AUTHOR("AnilKumar Ch <anilkumar@ti.com>"); +MODULE_DESCRIPTION("TPS65217 chip family multi-function driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c index 95c0d79..c9ed5c0 100644 --- a/drivers/mfd/tps65910-irq.c +++ b/drivers/mfd/tps65910-irq.c @@ -145,12 +145,23 @@ static void tps65910_irq_disable(struct irq_data *data) tps65910->irq_mask |= ( 1 << irq_to_tps65910_irq(tps65910, data->irq)); } +#ifdef CONFIG_PM_SLEEP +static int tps65910_irq_set_wake(struct irq_data *data, unsigned int enable) +{ + struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data); + return irq_set_irq_wake(tps65910->chip_irq, enable); +} +#else +#define tps65910_irq_set_wake NULL +#endif + static struct irq_chip tps65910_irq_chip = { .name = "tps65910", .irq_bus_lock = tps65910_irq_lock, .irq_bus_sync_unlock = tps65910_irq_sync_unlock, .irq_disable = tps65910_irq_disable, .irq_enable = tps65910_irq_enable, + .irq_set_wake = tps65910_irq_set_wake, }; int tps65910_irq_init(struct tps65910 *tps65910, int irq, diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 4392f6b..bf2b25e 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -16,10 +16,12 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> +#include <linux/err.h> #include <linux/slab.h> #include <linux/i2c.h> #include <linux/gpio.h> #include <linux/mfd/core.h> +#include <linux/regmap.h> #include <linux/mfd/tps65910.h> static struct mfd_cell tps65910s[] = { @@ -38,99 +40,56 @@ static struct mfd_cell tps65910s[] = { static int tps65910_i2c_read(struct tps65910 *tps65910, u8 reg, int bytes, void *dest) { - struct i2c_client *i2c = tps65910->i2c_client; - struct i2c_msg xfer[2]; - int ret; - - /* Write register */ - xfer[0].addr = i2c->addr; - xfer[0].flags = 0; - xfer[0].len = 1; - xfer[0].buf = ® - - /* Read data */ - xfer[1].addr = i2c->addr; - xfer[1].flags = I2C_M_RD; - xfer[1].len = bytes; - xfer[1].buf = dest; - - ret = i2c_transfer(i2c->adapter, xfer, 2); - if (ret == 2) - ret = 0; - else if (ret >= 0) - ret = -EIO; - - return ret; + return regmap_bulk_read(tps65910->regmap, reg, dest, bytes); } static int tps65910_i2c_write(struct tps65910 *tps65910, u8 reg, - int bytes, void *src) + int bytes, void *src) { - struct i2c_client *i2c = tps65910->i2c_client; - /* we add 1 byte for device register */ - u8 msg[TPS65910_MAX_REGISTER + 1]; - int ret; - - if (bytes > TPS65910_MAX_REGISTER) - return -EINVAL; - - msg[0] = reg; - memcpy(&msg[1], src, bytes); - - ret = i2c_master_send(i2c, msg, bytes + 1); - if (ret < 0) - return ret; - if (ret != bytes + 1) - return -EIO; - return 0; + return regmap_bulk_write(tps65910->regmap, reg, src, bytes); } int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask) { - u8 data; - int err; - - mutex_lock(&tps65910->io_mutex); - err = tps65910_i2c_read(tps65910, reg, 1, &data); - if (err) { - dev_err(tps65910->dev, "read from reg %x failed\n", reg); - goto out; - } - - data |= mask; - err = tps65910_i2c_write(tps65910, reg, 1, &data); - if (err) - dev_err(tps65910->dev, "write to reg %x failed\n", reg); - -out: - mutex_unlock(&tps65910->io_mutex); - return err; + return regmap_update_bits(tps65910->regmap, reg, mask, mask); } EXPORT_SYMBOL_GPL(tps65910_set_bits); int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask) { - u8 data; - int err; - - mutex_lock(&tps65910->io_mutex); - err = tps65910_i2c_read(tps65910, reg, 1, &data); - if (err) { - dev_err(tps65910->dev, "read from reg %x failed\n", reg); - goto out; - } - - data &= ~mask; - err = tps65910_i2c_write(tps65910, reg, 1, &data); - if (err) - dev_err(tps65910->dev, "write to reg %x failed\n", reg); - -out: - mutex_unlock(&tps65910->io_mutex); - return err; + return regmap_update_bits(tps65910->regmap, reg, mask, 0); } EXPORT_SYMBOL_GPL(tps65910_clear_bits); +static bool is_volatile_reg(struct device *dev, unsigned int reg) +{ + struct tps65910 *tps65910 = dev_get_drvdata(dev); + + /* + * Caching all regulator registers. + * All regualator register address range is same for + * TPS65910 and TPS65911 + */ + if ((reg >= TPS65910_VIO) && (reg <= TPS65910_VDAC)) { + /* Check for non-existing register */ + if (tps65910_chip_id(tps65910) == TPS65910) + if ((reg == TPS65911_VDDCTRL_OP) || + (reg == TPS65911_VDDCTRL_SR)) + return true; + return false; + } + return true; +} + +static const struct regmap_config tps65910_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = is_volatile_reg, + .max_register = TPS65910_MAX_REGISTER, + .num_reg_defaults_raw = TPS65910_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + static int tps65910_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -161,6 +120,13 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, tps65910->write = tps65910_i2c_write; mutex_init(&tps65910->io_mutex); + tps65910->regmap = regmap_init_i2c(i2c, &tps65910_regmap_config); + if (IS_ERR(tps65910->regmap)) { + ret = PTR_ERR(tps65910->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + goto regmap_err; + } + ret = mfd_add_devices(tps65910->dev, -1, tps65910s, ARRAY_SIZE(tps65910s), NULL, 0); @@ -178,6 +144,8 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, return ret; err: + regmap_exit(tps65910->regmap); +regmap_err: kfree(tps65910); kfree(init_data); return ret; @@ -189,6 +157,7 @@ static int tps65910_i2c_remove(struct i2c_client *i2c) tps65910_irq_exit(tps65910); mfd_remove_devices(tps65910->dev); + regmap_exit(tps65910->regmap); kfree(tps65910); return 0; diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 806680d..7c2267e 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -46,9 +46,7 @@ #include <linux/i2c.h> #include <linux/i2c/twl.h> -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -#include <plat/cpu.h> -#endif +#include "twl-core.h" /* * The TWL4030 "Triton 2" is one of a family of a multi-function "Power @@ -116,8 +114,8 @@ #define twl_has_watchdog() false #endif -#if defined(CONFIG_MFD_TWL4030_AUDIO) || defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) ||\ - defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE) +#if defined(CONFIG_MFD_TWL4030_AUDIO) || \ + defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) #define twl_has_codec() true #else #define twl_has_codec() false @@ -147,12 +145,10 @@ #define SUB_CHIP_ID1 1 #define SUB_CHIP_ID2 2 #define SUB_CHIP_ID3 3 +#define SUB_CHIP_ID_INVAL 0xff #define TWL_MODULE_LAST TWL4030_MODULE_LAST -#define TWL4030_NR_IRQS 34 /* core:8, power:8, gpio: 18 */ -#define TWL6030_NR_IRQS 20 - /* Base Address defns for twl4030_map[] */ /* subchip/slave 0 - USB ID */ @@ -314,7 +310,7 @@ static struct twl_mapping twl6030_map[] = { * so they continue to match the order in this table. */ { SUB_CHIP_ID1, TWL6030_BASEADD_USB }, - { SUB_CHIP_ID3, TWL6030_BASEADD_AUDIO }, + { SUB_CHIP_ID_INVAL, TWL6030_BASEADD_AUDIO }, { SUB_CHIP_ID2, TWL6030_BASEADD_DIEID }, { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, { SUB_CHIP_ID1, TWL6030_BASEADD_PIH }, @@ -376,6 +372,11 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) return -EPERM; } sid = twl_map[mod_no].sid; + if (unlikely(sid == SUB_CHIP_ID_INVAL)) { + pr_err("%s: module %d is not part of the pmic\n", + DRIVER_NAME, mod_no); + return -EINVAL; + } twl = &twl_modules[sid]; mutex_lock(&twl->xfer_lock); @@ -433,6 +434,11 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) return -EPERM; } sid = twl_map[mod_no].sid; + if (unlikely(sid == SUB_CHIP_ID_INVAL)) { + pr_err("%s: module %d is not part of the pmic\n", + DRIVER_NAME, mod_no); + return -EINVAL; + } twl = &twl_modules[sid]; mutex_lock(&twl->xfer_lock); @@ -663,7 +669,8 @@ add_regulator(int num, struct regulator_init_data *pdata, */ static int -add_children(struct twl4030_platform_data *pdata, unsigned long features) +add_children(struct twl4030_platform_data *pdata, unsigned irq_base, + unsigned long features) { struct device *child; unsigned sub_chip_id; @@ -671,7 +678,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_gpio() && pdata->gpio) { child = add_child(SUB_CHIP_ID1, "twl4030_gpio", pdata->gpio, sizeof(*pdata->gpio), - false, pdata->irq_base + GPIO_INTR_OFFSET, 0); + false, irq_base + GPIO_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -679,7 +686,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_keypad() && pdata->keypad) { child = add_child(SUB_CHIP_ID2, "twl4030_keypad", pdata->keypad, sizeof(*pdata->keypad), - true, pdata->irq_base + KEYPAD_INTR_OFFSET, 0); + true, irq_base + KEYPAD_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -687,7 +694,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_madc() && pdata->madc) { child = add_child(2, "twl4030_madc", pdata->madc, sizeof(*pdata->madc), - true, pdata->irq_base + MADC_INTR_OFFSET, 0); + true, irq_base + MADC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -703,7 +710,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) sub_chip_id = twl_map[TWL_MODULE_RTC].sid; child = add_child(sub_chip_id, "twl_rtc", NULL, 0, - true, pdata->irq_base + RTC_INTR_OFFSET, 0); + true, irq_base + RTC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -756,8 +763,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) pdata->usb, sizeof(*pdata->usb), true, /* irq0 = USB_PRES, irq1 = USB */ - pdata->irq_base + USB_PRES_INTR_OFFSET, - pdata->irq_base + USB_INTR_OFFSET); + irq_base + USB_PRES_INTR_OFFSET, + irq_base + USB_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); @@ -805,8 +812,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) pdata->usb, sizeof(*pdata->usb), true, /* irq1 = VBUS_PRES, irq0 = USB ID */ - pdata->irq_base + USBOTG_INTR_OFFSET, - pdata->irq_base + USB_PRES_INTR_OFFSET); + irq_base + USBOTG_INTR_OFFSET, + irq_base + USB_PRES_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); @@ -833,7 +840,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_pwrbutton() && twl_class_is_4030()) { child = add_child(1, "twl4030_pwrbutton", - NULL, 0, true, pdata->irq_base + 8 + 0, 0); + NULL, 0, true, irq_base + 8 + 0, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -847,15 +854,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } - if (twl_has_codec() && pdata->audio && twl_class_is_6030()) { - sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid; - child = add_child(sub_chip_id, "twl6040", - pdata->audio, sizeof(*pdata->audio), - false, 0, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - /* twl4030 regulators */ if (twl_has_regulator() && twl_class_is_4030()) { child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1, @@ -1092,8 +1090,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) child = add_child(3, "twl4030_bci", pdata->bci, sizeof(*pdata->bci), false, /* irq0 = CHG_PRES, irq1 = BCI */ - pdata->irq_base + BCI_PRES_INTR_OFFSET, - pdata->irq_base + BCI_INTR_OFFSET); + irq_base + BCI_PRES_INTR_OFFSET, + irq_base + BCI_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); } @@ -1193,26 +1191,24 @@ static void clocks_init(struct device *dev, /*----------------------------------------------------------------------*/ -int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); -int twl4030_exit_irq(void); -int twl4030_init_chip_irq(const char *chip); -int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); -int twl6030_exit_irq(void); static int twl_remove(struct i2c_client *client) { - unsigned i; + unsigned i, num_slaves; int status; - if (twl_class_is_4030()) + if (twl_class_is_4030()) { status = twl4030_exit_irq(); - else + num_slaves = TWL_NUM_SLAVES; + } else { status = twl6030_exit_irq(); + num_slaves = TWL_NUM_SLAVES - 1; + } if (status < 0) return status; - for (i = 0; i < TWL_NUM_SLAVES; i++) { + for (i = 0; i < num_slaves; i++) { struct twl_client *twl = &twl_modules[i]; if (twl->client && twl->client != client) @@ -1223,20 +1219,15 @@ static int twl_remove(struct i2c_client *client) return 0; } -/* NOTE: this driver only handles a single twl4030/tps659x0 chip */ +/* NOTE: This driver only handles a single twl4030/tps659x0 chip */ static int __devinit twl_probe(struct i2c_client *client, const struct i2c_device_id *id) { - int status; - unsigned i; struct twl4030_platform_data *pdata = client->dev.platform_data; struct device_node *node = client->dev.of_node; - u8 temp; - int ret = 0; - int nr_irqs = TWL4030_NR_IRQS; - - if ((id->driver_data) & TWL6030_CLASS) - nr_irqs = TWL6030_NR_IRQS; + int irq_base = 0; + int status; + unsigned i, num_slaves; if (node && !pdata) { /* @@ -1255,17 +1246,6 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EINVAL; } - status = irq_alloc_descs(-1, pdata->irq_base, nr_irqs, 0); - if (IS_ERR_VALUE(status)) { - dev_err(&client->dev, "Fail to allocate IRQ descs\n"); - return status; - } - - pdata->irq_base = status; - pdata->irq_end = pdata->irq_base + nr_irqs; - irq_domain_add_legacy(node, nr_irqs, pdata->irq_base, 0, - &irq_domain_simple_ops, NULL); - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { dev_dbg(&client->dev, "can't talk I2C?\n"); return -EIO; @@ -1276,13 +1256,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EBUSY; } - for (i = 0; i < TWL_NUM_SLAVES; i++) { - struct twl_client *twl = &twl_modules[i]; + if ((id->driver_data) & TWL6030_CLASS) { + twl_id = TWL6030_CLASS_ID; + twl_map = &twl6030_map[0]; + num_slaves = TWL_NUM_SLAVES - 1; + } else { + twl_id = TWL4030_CLASS_ID; + twl_map = &twl4030_map[0]; + num_slaves = TWL_NUM_SLAVES; + } + + for (i = 0; i < num_slaves; i++) { + struct twl_client *twl = &twl_modules[i]; twl->address = client->addr + i; - if (i == 0) + if (i == 0) { twl->client = client; - else { + } else { twl->client = i2c_new_dummy(client->adapter, twl->address); if (!twl->client) { @@ -1294,22 +1284,16 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) } mutex_init(&twl->xfer_lock); } + inuse = true; - if ((id->driver_data) & TWL6030_CLASS) { - twl_id = TWL6030_CLASS_ID; - twl_map = &twl6030_map[0]; - } else { - twl_id = TWL4030_CLASS_ID; - twl_map = &twl4030_map[0]; - } /* setup clock framework */ clocks_init(&client->dev, pdata->clock); /* read TWL IDCODE Register */ if (twl_id == TWL4030_CLASS_ID) { - ret = twl_read_idcode_register(); - WARN(ret < 0, "Error: reading twl_idcode register value\n"); + status = twl_read_idcode_register(); + WARN(status < 0, "Error: reading twl_idcode register value\n"); } /* load power event scripts */ @@ -1317,31 +1301,31 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) twl4030_power_init(pdata->power); /* Maybe init the T2 Interrupt subsystem */ - if (client->irq - && pdata->irq_base - && pdata->irq_end > pdata->irq_base) { + if (client->irq) { if (twl_class_is_4030()) { twl4030_init_chip_irq(id->name); - status = twl4030_init_irq(client->irq, pdata->irq_base, - pdata->irq_end); + irq_base = twl4030_init_irq(&client->dev, client->irq); } else { - status = twl6030_init_irq(client->irq, pdata->irq_base, - pdata->irq_end); + irq_base = twl6030_init_irq(&client->dev, client->irq); } - if (status < 0) + if (irq_base < 0) { + status = irq_base; goto fail; + } } - /* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. + /* + * Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0, * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0. */ - if (twl_class_is_4030()) { + u8 temp; + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1); temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \ - I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); + I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); } @@ -1349,11 +1333,12 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) if (node) status = of_platform_populate(node, NULL, NULL, &client->dev); if (status) - status = add_children(pdata, id->driver_data); + status = add_children(pdata, irq_base, id->driver_data); fail: if (status < 0) twl_remove(client); + return status; } diff --git a/drivers/mfd/twl-core.h b/drivers/mfd/twl-core.h index 8c50a55..6ff99dc 100644 --- a/drivers/mfd/twl-core.h +++ b/drivers/mfd/twl-core.h @@ -1,9 +1,9 @@ #ifndef __TWL_CORE_H__ #define __TWL_CORE_H__ -extern int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +extern int twl6030_init_irq(struct device *dev, int irq_num); extern int twl6030_exit_irq(void); -extern int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +extern int twl4030_init_irq(struct device *dev, int irq_num); extern int twl4030_exit_irq(void); extern int twl4030_init_chip_irq(const char *chip); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index b69bb51..5d656e8 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -28,10 +28,12 @@ */ #include <linux/init.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/slab.h> - +#include <linux/of.h> +#include <linux/irqdomain.h> #include <linux/i2c/twl.h> #include "twl-core.h" @@ -53,13 +55,14 @@ * base + 8 .. base + 15 SIH for PWR_INT * base + 16 .. base + 33 SIH for GPIO */ +#define TWL4030_CORE_NR_IRQS 8 +#define TWL4030_PWR_NR_IRQS 8 /* PIH register offsets */ #define REG_PIH_ISR_P1 0x01 #define REG_PIH_ISR_P2 0x02 #define REG_PIH_SIR 0x03 /* for testing */ - /* Linux could (eventually) use either IRQ line */ static int irq_line; @@ -111,7 +114,8 @@ static int nr_sih_modules; #define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT -/* Order in this table matches order in PIH_ISR. That is, +/* + * Order in this table matches order in PIH_ISR. That is, * BIT(n) in PIH_ISR is sih_modules[n]. */ /* sih_modules_twl4030 is used both in twl4030 and twl5030 */ @@ -288,7 +292,6 @@ static unsigned twl4030_irq_base; */ static irqreturn_t handle_twl4030_pih(int irq, void *devid) { - int module_irq; irqreturn_t ret; u8 pih_isr; @@ -299,16 +302,18 @@ static irqreturn_t handle_twl4030_pih(int irq, void *devid) return IRQ_NONE; } - /* these handlers deal with the relevant SIH irq status */ - for (module_irq = twl4030_irq_base; - pih_isr; - pih_isr >>= 1, module_irq++) { - if (pih_isr & 0x1) - handle_nested_irq(module_irq); + while (pih_isr) { + unsigned long pending = __ffs(pih_isr); + unsigned int irq; + + pih_isr &= ~BIT(pending); + irq = pending + twl4030_irq_base; + handle_nested_irq(irq); } return IRQ_HANDLED; } + /*----------------------------------------------------------------------*/ /* @@ -337,7 +342,6 @@ static int twl4030_init_sih_modules(unsigned line) memset(buf, 0xff, sizeof buf); sih = sih_modules; for (i = 0; i < nr_sih_modules; i++, sih++) { - /* skip USB -- it's funky */ if (!sih->bytes_ixr) continue; @@ -352,7 +356,8 @@ static int twl4030_init_sih_modules(unsigned line) pr_err("twl4030: err %d initializing %s %s\n", status, sih->name, "IMR"); - /* Maybe disable "exclusive" mode; buffer second pending irq; + /* + * Maybe disable "exclusive" mode; buffer second pending irq; * set Clear-On-Read (COR) bit. * * NOTE that sometimes COR polarity is documented as being @@ -382,7 +387,8 @@ static int twl4030_init_sih_modules(unsigned line) if (sih->irq_lines <= line) continue; - /* Clear pending interrupt status. Either the read was + /* + * Clear pending interrupt status. Either the read was * enough, or we need to write those bits. Repeat, in * case an IRQ is pending (PENDDIS=0) ... that's not * uncommon with PWR_INT.PWRON. @@ -398,7 +404,8 @@ static int twl4030_init_sih_modules(unsigned line) status = twl_i2c_write(sih->module, buf, sih->mask[line].isr_offset, sih->bytes_ixr); - /* else COR=1 means read sufficed. + /* + * else COR=1 means read sufficed. * (for most SIH modules...) */ } @@ -410,7 +417,8 @@ static int twl4030_init_sih_modules(unsigned line) static inline void activate_irq(int irq) { #ifdef CONFIG_ARM - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it + /* + * ARM requires an extra step to clear IRQ_NOREQUEST, which it * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. */ set_irq_flags(irq, IRQF_VALID); @@ -620,33 +628,24 @@ static irqreturn_t handle_twl4030_sih(int irq, void *data) return IRQ_HANDLED; } -static unsigned twl4030_irq_next; - -/* returns the first IRQ used by this SIH bank, - * or negative errno - */ -int twl4030_sih_setup(int module) +/* returns the first IRQ used by this SIH bank, or negative errno */ +int twl4030_sih_setup(struct device *dev, int module, int irq_base) { int sih_mod; const struct sih *sih = NULL; struct sih_agent *agent; int i, irq; int status = -EINVAL; - unsigned irq_base = twl4030_irq_next; /* only support modules with standard clear-on-read for now */ - for (sih_mod = 0, sih = sih_modules; - sih_mod < nr_sih_modules; + for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules; sih_mod++, sih++) { if (sih->module == module && sih->set_cor) { - if (!WARN((irq_base + sih->bits) > NR_IRQS, - "irq %d for %s too big\n", - irq_base + sih->bits, - sih->name)) - status = 0; + status = 0; break; } } + if (status < 0) return status; @@ -654,8 +653,6 @@ int twl4030_sih_setup(int module) if (!agent) return -ENOMEM; - status = 0; - agent->irq_base = irq_base; agent->sih = sih; agent->imr = ~0; @@ -671,8 +668,6 @@ int twl4030_sih_setup(int module) activate_irq(irq); } - twl4030_irq_next += i; - /* replace generic PIH handler (handle_simple_irq) */ irq = sih_mod + twl4030_irq_base; irq_set_handler_data(irq, agent); @@ -680,26 +675,43 @@ int twl4030_sih_setup(int module) status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0, agent->irq_name ?: sih->name, NULL); - pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, - irq, irq_base, twl4030_irq_next - 1); + dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name, + irq, irq_base, irq_base + i - 1); return status < 0 ? status : irq_base; } /* FIXME need a call to reverse twl4030_sih_setup() ... */ - /*----------------------------------------------------------------------*/ /* FIXME pass in which interrupt line we'll use ... */ #define twl_irq_line 0 -int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +int twl4030_init_irq(struct device *dev, int irq_num) { static struct irq_chip twl4030_irq_chip; + int status, i; + int irq_base, irq_end, nr_irqs; + struct device_node *node = dev->of_node; - int status; - int i; + /* + * TWL core and pwr interrupts must be contiguous because + * the hwirqs numbers are defined contiguously from 1 to 15. + * Create only one domain for both. + */ + nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS; + + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (IS_ERR_VALUE(irq_base)) { + dev_err(dev, "Fail to allocate IRQ descs\n"); + return irq_base; + } + + irq_domain_add_legacy(node, nr_irqs, irq_base, 0, + &irq_domain_simple_ops, NULL); + + irq_end = irq_base + TWL4030_CORE_NR_IRQS; /* * Mask and clear all TWL4030 interrupts since initially we do @@ -711,7 +723,8 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) twl4030_irq_base = irq_base; - /* install an irq handler for each of the SIH modules; + /* + * Install an irq handler for each of the SIH modules; * clone dummy irq_chip since PIH can't *do* anything */ twl4030_irq_chip = dummy_irq_chip; @@ -725,14 +738,14 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) irq_set_nested_thread(i, 1); activate_irq(i); } - twl4030_irq_next = i; - pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", - irq_num, irq_base, twl4030_irq_next - 1); + + dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH", + irq_num, irq_base, irq_end); /* ... and the PWR_INT module ... */ - status = twl4030_sih_setup(TWL4030_MODULE_INT); + status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end); if (status < 0) { - pr_err("twl4030: sih_setup PWR INT --> %d\n", status); + dev_err(dev, "sih_setup PWR INT --> %d\n", status); goto fail; } @@ -741,11 +754,11 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) IRQF_ONESHOT, "TWL4030-PIH", NULL); if (status < 0) { - pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status); + dev_err(dev, "could not claim irq%d: %d\n", irq_num, status); goto fail_rqirq; } - return status; + return irq_base; fail_rqirq: /* clean up twl4030_sih_setup */ fail: diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c index c6b456a..b76902f 100644 --- a/drivers/mfd/twl6030-irq.c +++ b/drivers/mfd/twl6030-irq.c @@ -39,6 +39,8 @@ #include <linux/i2c/twl.h> #include <linux/platform_device.h> #include <linux/suspend.h> +#include <linux/of.h> +#include <linux/irqdomain.h> #include "twl-core.h" @@ -51,8 +53,8 @@ * * We set up IRQs starting at a platform-specified base. An interrupt map table, * specifies mapping between interrupt number and the associated module. - * */ +#define TWL6030_NR_IRQS 20 static int twl6030_interrupt_mapping[24] = { PWR_INTR_OFFSET, /* Bit 0 PWRON */ @@ -185,8 +187,17 @@ static int twl6030_irq_thread(void *data) } local_irq_enable(); } - ret = twl_i2c_write(TWL_MODULE_PIH, sts.bytes, - REG_INT_STS_A, 3); /* clear INT_STS_A */ + + /* + * NOTE: + * Simulation confirms that documentation is wrong w.r.t the + * interrupt status clear operation. A single *byte* write to + * any one of STS_A to STS_C register results in all three + * STS registers being reset. Since it does not matter which + * value is written, all three registers are cleared on a + * single byte write, so we just use 0x0 to clear. + */ + ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A); if (ret) pr_warning("twl6030: I2C error in clearing PIH ISR\n"); @@ -227,7 +238,7 @@ static inline void activate_irq(int irq) #endif } -int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) +static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) { if (on) atomic_inc(&twl6030_wakeirqs); @@ -237,11 +248,6 @@ int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) return 0; } -/*----------------------------------------------------------------------*/ - -static unsigned twl6030_irq_next; - -/*----------------------------------------------------------------------*/ int twl6030_interrupt_unmask(u8 bit_mask, u8 offset) { int ret; @@ -311,7 +317,8 @@ int twl6030_mmc_card_detect_config(void) ret); return ret; } - return 0; + + return twl6030_irq_base + MMCDETECT_INTR_OFFSET; } EXPORT_SYMBOL(twl6030_mmc_card_detect_config); @@ -340,29 +347,44 @@ int twl6030_mmc_card_detect(struct device *dev, int slot) } EXPORT_SYMBOL(twl6030_mmc_card_detect); -int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +int twl6030_init_irq(struct device *dev, int irq_num) { - - int status = 0; - int i; + struct device_node *node = dev->of_node; + int nr_irqs, irq_base, irq_end; struct task_struct *task; - int ret; - u8 mask[4]; + static struct irq_chip twl6030_irq_chip; + int status = 0; + int i; + u8 mask[4]; + + nr_irqs = TWL6030_NR_IRQS; + + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (IS_ERR_VALUE(irq_base)) { + dev_err(dev, "Fail to allocate IRQ descs\n"); + return irq_base; + } + + irq_domain_add_legacy(node, nr_irqs, irq_base, 0, + &irq_domain_simple_ops, NULL); + + irq_end = irq_base + nr_irqs; - static struct irq_chip twl6030_irq_chip; mask[1] = 0xFF; mask[2] = 0xFF; mask[3] = 0xFF; - ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], - REG_INT_MSK_LINE_A, 3); /* MASK ALL INT LINES */ - ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], - REG_INT_MSK_STS_A, 3); /* MASK ALL INT STS */ - ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], - REG_INT_STS_A, 3); /* clear INT_STS_A,B,C */ + + /* mask all int lines */ + twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3); + /* mask all int sts */ + twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3); + /* clear INT_STS_A,B,C */ + twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3); twl6030_irq_base = irq_base; - /* install an irq handler for each of the modules; + /* + * install an irq handler for each of the modules; * clone dummy irq_chip since PIH can't *do* anything */ twl6030_irq_chip = dummy_irq_chip; @@ -377,30 +399,29 @@ int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) activate_irq(i); } - twl6030_irq_next = i; - pr_info("twl6030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", - irq_num, irq_base, twl6030_irq_next - 1); + dev_info(dev, "PIH (irq %d) chaining IRQs %d..%d\n", + irq_num, irq_base, irq_end); /* install an irq handler to demultiplex the TWL6030 interrupt */ init_completion(&irq_event); - status = request_irq(irq_num, handle_twl6030_pih, 0, - "TWL6030-PIH", &irq_event); + status = request_irq(irq_num, handle_twl6030_pih, 0, "TWL6030-PIH", + &irq_event); if (status < 0) { - pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status); + dev_err(dev, "could not claim irq %d: %d\n", irq_num, status); goto fail_irq; } task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq"); if (IS_ERR(task)) { - pr_err("twl6030: could not create irq %d thread!\n", irq_num); + dev_err(dev, "could not create irq %d thread!\n", irq_num); status = PTR_ERR(task); goto fail_kthread; } twl_irq = irq_num; register_pm_notifier(&twl6030_irq_pm_notifier_block); - return status; + return irq_base; fail_kthread: free_irq(irq_num, &irq_event); @@ -408,6 +429,7 @@ fail_kthread: fail_irq: for (i = irq_base; i < irq_end; i++) irq_set_chip_and_handler(i, NULL, NULL); + return status; } diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index cea9da6..b63c075 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -11,14 +11,15 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/device.h> +#include <linux/err.h> #include <linux/fs.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> #include <linux/proc_fs.h> -#include <linux/device.h> #include <linux/mfd/ucb1x00.h> -#include <mach/dma.h> - - #define UCB1X00_ATTR(name,input)\ static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \ char *buf) \ @@ -38,14 +39,45 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2); static int ucb1x00_assabet_add(struct ucb1x00_dev *dev) { - device_create_file(&dev->ucb->dev, &dev_attr_vbatt); - device_create_file(&dev->ucb->dev, &dev_attr_vcharger); - device_create_file(&dev->ucb->dev, &dev_attr_batt_temp); + struct ucb1x00 *ucb = dev->ucb; + struct platform_device *pdev; + struct gpio_keys_platform_data keys; + static struct gpio_keys_button buttons[6]; + unsigned i; + + memset(buttons, 0, sizeof(buttons)); + memset(&keys, 0, sizeof(keys)); + + for (i = 0; i < ARRAY_SIZE(buttons); i++) { + buttons[i].code = BTN_0 + i; + buttons[i].gpio = ucb->gpio.base + i; + buttons[i].type = EV_KEY; + buttons[i].can_disable = true; + } + + keys.buttons = buttons; + keys.nbuttons = ARRAY_SIZE(buttons); + keys.poll_interval = 50; + keys.name = "ucb1x00"; + + pdev = platform_device_register_data(&ucb->dev, "gpio-keys", -1, + &keys, sizeof(keys)); + + device_create_file(&ucb->dev, &dev_attr_vbatt); + device_create_file(&ucb->dev, &dev_attr_vcharger); + device_create_file(&ucb->dev, &dev_attr_batt_temp); + + dev->priv = pdev; return 0; } static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev) { + struct platform_device *pdev = dev->priv; + + if (!IS_ERR(pdev)) + platform_device_unregister(pdev); + device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp); device_remove_file(&dev->ucb->dev, &dev_attr_vcharger); device_remove_file(&dev->ucb->dev, &dev_attr_vbatt); diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index febc90c..70f02da 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -23,14 +23,12 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/device.h> #include <linux/mutex.h> #include <linux/mfd/ucb1x00.h> +#include <linux/pm.h> #include <linux/gpio.h> -#include <linux/semaphore.h> - -#include <mach/dma.h> -#include <mach/hardware.h> static DEFINE_MUTEX(ucb1x00_mutex); static LIST_HEAD(ucb1x00_drivers); @@ -102,7 +100,7 @@ void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear) * ucb1x00_enable must have been called to enable the comms * before using this function. * - * This function does not take any semaphores or spinlocks. + * This function does not take any mutexes or spinlocks. */ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb) { @@ -120,14 +118,22 @@ static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value) else ucb->io_out &= ~(1 << offset); + ucb1x00_enable(ucb); ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + ucb1x00_disable(ucb); spin_unlock_irqrestore(&ucb->io_lock, flags); } static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset) { struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); - return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset); + unsigned val; + + ucb1x00_enable(ucb); + val = ucb1x00_reg_read(ucb, UCB_IO_DATA); + ucb1x00_disable(ucb); + + return val & (1 << offset); } static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset) @@ -137,7 +143,9 @@ static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset) spin_lock_irqsave(&ucb->io_lock, flags); ucb->io_dir &= ~(1 << offset); + ucb1x00_enable(ucb); ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + ucb1x00_disable(ucb); spin_unlock_irqrestore(&ucb->io_lock, flags); return 0; @@ -157,6 +165,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset else ucb->io_out &= ~mask; + ucb1x00_enable(ucb); if (old != ucb->io_out) ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); @@ -164,11 +173,19 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset ucb->io_dir |= mask; ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); } + ucb1x00_disable(ucb); spin_unlock_irqrestore(&ucb->io_lock, flags); return 0; } +static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + + return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO; +} + /* * UCB1300 data sheet says we must: * 1. enable ADC => 5us (including reference startup time) @@ -186,7 +203,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset * Any code wishing to use the ADC converter must call this * function prior to using it. * - * This function takes the ADC semaphore to prevent two or more + * This function takes the ADC mutex to prevent two or more * concurrent uses, and therefore may sleep. As a result, it * can only be called from process context, not interrupt * context. @@ -196,7 +213,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset */ void ucb1x00_adc_enable(struct ucb1x00 *ucb) { - down(&ucb->adc_sem); + mutex_lock(&ucb->adc_mutex); ucb->adc_cr |= UCB_ADC_ENA; @@ -218,7 +235,7 @@ void ucb1x00_adc_enable(struct ucb1x00 *ucb) * complete (2 frames max without sync). * * If called for a synchronised ADC conversion, it may sleep - * with the ADC semaphore held. + * with the ADC mutex held. */ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync) { @@ -246,7 +263,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync) * ucb1x00_adc_disable - disable the ADC converter * @ucb: UCB1x00 structure describing chip * - * Disable the ADC converter and release the ADC semaphore. + * Disable the ADC converter and release the ADC mutex. */ void ucb1x00_adc_disable(struct ucb1x00 *ucb) { @@ -254,7 +271,7 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb) ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr); ucb1x00_disable(ucb); - up(&ucb->adc_sem); + mutex_unlock(&ucb->adc_mutex); } /* @@ -265,10 +282,9 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb) * SIBCLK to talk to the chip. We leave the clock running until * we have finished processing all interrupts from the chip. */ -static irqreturn_t ucb1x00_irq(int irqnr, void *devid) +static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc) { - struct ucb1x00 *ucb = devid; - struct ucb1x00_irq *irq; + struct ucb1x00 *ucb = irq_desc_get_handler_data(desc); unsigned int isr, i; ucb1x00_enable(ucb); @@ -276,157 +292,104 @@ static irqreturn_t ucb1x00_irq(int irqnr, void *devid) ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr); ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0); - for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++) - if (isr & 1 && irq->fn) - irq->fn(i, irq->devid); + for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++) + if (isr & 1) + generic_handle_irq(ucb->irq_base + i); ucb1x00_disable(ucb); - - return IRQ_HANDLED; } -/** - * ucb1x00_hook_irq - hook a UCB1x00 interrupt - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @fn: function to call when interrupt is triggered - * @devid: device id to pass to interrupt handler - * - * Hook the specified interrupt. You can only register one handler - * for each interrupt source. The interrupt source is not enabled - * by this function; use ucb1x00_enable_irq instead. - * - * Interrupt handlers will be called with other interrupts enabled. - * - * Returns zero on success, or one of the following errors: - * -EINVAL if the interrupt index is invalid - * -EBUSY if the interrupt has already been hooked - */ -int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid) +static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask) { - struct ucb1x00_irq *irq; - int ret = -EINVAL; - - if (idx < 16) { - irq = ucb->irq_handler + idx; - ret = -EBUSY; - - spin_lock_irq(&ucb->lock); - if (irq->fn == NULL) { - irq->devid = devid; - irq->fn = fn; - ret = 0; - } - spin_unlock_irq(&ucb->lock); - } - return ret; + ucb1x00_enable(ucb); + if (ucb->irq_ris_enbl & mask) + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + if (ucb->irq_fal_enbl & mask) + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); + ucb1x00_disable(ucb); } -/** - * ucb1x00_enable_irq - enable an UCB1x00 interrupt source - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @edges: interrupt edges to enable - * - * Enable the specified interrupt to trigger on %UCB_RISING, - * %UCB_FALLING or both edges. The interrupt should have been - * hooked by ucb1x00_hook_irq. - */ -void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges) +static void ucb1x00_irq_noop(struct irq_data *data) { - unsigned long flags; +} - if (idx < 16) { - spin_lock_irqsave(&ucb->lock, flags); +static void ucb1x00_irq_mask(struct irq_data *data) +{ + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - ucb1x00_enable(ucb); - if (edges & UCB_RISING) { - ucb->irq_ris_enbl |= 1 << idx; - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - } - if (edges & UCB_FALLING) { - ucb->irq_fal_enbl |= 1 << idx; - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - } - ucb1x00_disable(ucb); - spin_unlock_irqrestore(&ucb->lock, flags); - } + raw_spin_lock(&ucb->irq_lock); + ucb->irq_mask &= ~mask; + ucb1x00_irq_update(ucb, mask); + raw_spin_unlock(&ucb->irq_lock); } -/** - * ucb1x00_disable_irq - disable an UCB1x00 interrupt source - * @ucb: UCB1x00 structure describing chip - * @edges: interrupt edges to disable - * - * Disable the specified interrupt triggering on the specified - * (%UCB_RISING, %UCB_FALLING or both) edges. - */ -void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges) +static void ucb1x00_irq_unmask(struct irq_data *data) { - unsigned long flags; + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - if (idx < 16) { - spin_lock_irqsave(&ucb->lock, flags); - - ucb1x00_enable(ucb); - if (edges & UCB_RISING) { - ucb->irq_ris_enbl &= ~(1 << idx); - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - } - if (edges & UCB_FALLING) { - ucb->irq_fal_enbl &= ~(1 << idx); - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - } - ucb1x00_disable(ucb); - spin_unlock_irqrestore(&ucb->lock, flags); - } + raw_spin_lock(&ucb->irq_lock); + ucb->irq_mask |= mask; + ucb1x00_irq_update(ucb, mask); + raw_spin_unlock(&ucb->irq_lock); } -/** - * ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @devid: device id. - * - * Disable the interrupt source and remove the handler. devid must - * match the devid passed when hooking the interrupt. - * - * Returns zero on success, or one of the following errors: - * -EINVAL if the interrupt index is invalid - * -ENOENT if devid does not match - */ -int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid) +static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type) { - struct ucb1x00_irq *irq; - int ret; + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - if (idx >= 16) - goto bad; + raw_spin_lock(&ucb->irq_lock); + if (type & IRQ_TYPE_EDGE_RISING) + ucb->irq_ris_enbl |= mask; + else + ucb->irq_ris_enbl &= ~mask; - irq = ucb->irq_handler + idx; - ret = -ENOENT; + if (type & IRQ_TYPE_EDGE_FALLING) + ucb->irq_fal_enbl |= mask; + else + ucb->irq_fal_enbl &= ~mask; + if (ucb->irq_mask & mask) { + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); + } + raw_spin_unlock(&ucb->irq_lock); - spin_lock_irq(&ucb->lock); - if (irq->devid == devid) { - ucb->irq_ris_enbl &= ~(1 << idx); - ucb->irq_fal_enbl &= ~(1 << idx); + return 0; +} - ucb1x00_enable(ucb); - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - ucb1x00_disable(ucb); +static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data; + unsigned mask = 1 << (data->irq - ucb->irq_base); - irq->fn = NULL; - irq->devid = NULL; - ret = 0; - } - spin_unlock_irq(&ucb->lock); - return ret; + if (!pdata || !pdata->can_wakeup) + return -EINVAL; -bad: - printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx); - return -EINVAL; + raw_spin_lock(&ucb->irq_lock); + if (on) + ucb->irq_wake |= mask; + else + ucb->irq_wake &= ~mask; + raw_spin_unlock(&ucb->irq_lock); + + return 0; } +static struct irq_chip ucb1x00_irqchip = { + .name = "ucb1x00", + .irq_ack = ucb1x00_irq_noop, + .irq_mask = ucb1x00_irq_mask, + .irq_unmask = ucb1x00_irq_unmask, + .irq_set_type = ucb1x00_irq_set_type, + .irq_set_wake = ucb1x00_irq_set_wake, +}; + static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv) { struct ucb1x00_dev *dev; @@ -440,8 +403,8 @@ static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv) ret = drv->add(dev); if (ret == 0) { - list_add(&dev->dev_node, &ucb->devs); - list_add(&dev->drv_node, &drv->devs); + list_add_tail(&dev->dev_node, &ucb->devs); + list_add_tail(&dev->drv_node, &drv->devs); } else { kfree(dev); } @@ -533,98 +496,126 @@ static struct class ucb1x00_class = { static int ucb1x00_probe(struct mcp *mcp) { - struct ucb1x00 *ucb; + struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data; struct ucb1x00_driver *drv; - unsigned int id; + struct ucb1x00 *ucb; + unsigned id, i, irq_base; int ret = -ENODEV; - int temp; + + /* Tell the platform to deassert the UCB1x00 reset */ + if (pdata && pdata->reset) + pdata->reset(UCB_RST_PROBE); mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); + mcp_disable(mcp); if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) { printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id); - goto err_disable; + goto out; } ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL); ret = -ENOMEM; if (!ucb) - goto err_disable; - + goto out; + device_initialize(&ucb->dev); ucb->dev.class = &ucb1x00_class; ucb->dev.parent = &mcp->attached_device; dev_set_name(&ucb->dev, "ucb1x00"); - spin_lock_init(&ucb->lock); + raw_spin_lock_init(&ucb->irq_lock); spin_lock_init(&ucb->io_lock); - sema_init(&ucb->adc_sem, 1); + mutex_init(&ucb->adc_mutex); ucb->id = id; ucb->mcp = mcp; + + ret = device_add(&ucb->dev); + if (ret) + goto err_dev_add; + + ucb1x00_enable(ucb); ucb->irq = ucb1x00_detect_irq(ucb); + ucb1x00_disable(ucb); if (ucb->irq == NO_IRQ) { - printk(KERN_ERR "UCB1x00: IRQ probe failed\n"); + dev_err(&ucb->dev, "IRQ probe failed\n"); ret = -ENODEV; - goto err_free; + goto err_no_irq; } ucb->gpio.base = -1; - if (mcp->gpio_base != 0) { + irq_base = pdata ? pdata->irq_base : 0; + ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1); + if (ucb->irq_base < 0) { + dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n", + ucb->irq_base); + goto err_irq_alloc; + } + + for (i = 0; i < 16; i++) { + unsigned irq = ucb->irq_base + i; + + irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq); + irq_set_chip_data(irq, ucb); + set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST); + } + + irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(ucb->irq, ucb); + irq_set_chained_handler(ucb->irq, ucb1x00_irq); + + if (pdata && pdata->gpio_base) { ucb->gpio.label = dev_name(&ucb->dev); - ucb->gpio.base = mcp->gpio_base; + ucb->gpio.dev = &ucb->dev; + ucb->gpio.owner = THIS_MODULE; + ucb->gpio.base = pdata->gpio_base; ucb->gpio.ngpio = 10; ucb->gpio.set = ucb1x00_gpio_set; ucb->gpio.get = ucb1x00_gpio_get; ucb->gpio.direction_input = ucb1x00_gpio_direction_input; ucb->gpio.direction_output = ucb1x00_gpio_direction_output; + ucb->gpio.to_irq = ucb1x00_to_irq; ret = gpiochip_add(&ucb->gpio); if (ret) - goto err_free; + goto err_gpio_add; } else dev_info(&ucb->dev, "gpio_base not set so no gpiolib support"); - ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING, - "UCB1x00", ucb); - if (ret) { - printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n", - ucb->irq, ret); - goto err_gpio; - } - mcp_set_drvdata(mcp, ucb); - ret = device_register(&ucb->dev); - if (ret) - goto err_irq; - + if (pdata) + device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup); INIT_LIST_HEAD(&ucb->devs); mutex_lock(&ucb1x00_mutex); - list_add(&ucb->node, &ucb1x00_devices); + list_add_tail(&ucb->node, &ucb1x00_devices); list_for_each_entry(drv, &ucb1x00_drivers, node) { ucb1x00_add_dev(ucb, drv); } mutex_unlock(&ucb1x00_mutex); - goto out; + return ret; - err_irq: - free_irq(ucb->irq, ucb); - err_gpio: - if (ucb->gpio.base != -1) - temp = gpiochip_remove(&ucb->gpio); - err_free: - kfree(ucb); - err_disable: - mcp_disable(mcp); + err_gpio_add: + irq_set_chained_handler(ucb->irq, NULL); + err_irq_alloc: + if (ucb->irq_base > 0) + irq_free_descs(ucb->irq_base, 16); + err_no_irq: + device_del(&ucb->dev); + err_dev_add: + put_device(&ucb->dev); out: + if (pdata && pdata->reset) + pdata->reset(UCB_RST_PROBE_FAIL); return ret; } static void ucb1x00_remove(struct mcp *mcp) { + struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data; struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct list_head *l, *n; int ret; @@ -643,8 +634,12 @@ static void ucb1x00_remove(struct mcp *mcp) dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret); } - free_irq(ucb->irq, ucb); + irq_set_chained_handler(ucb->irq, NULL); + irq_free_descs(ucb->irq_base, 16); device_unregister(&ucb->dev); + + if (pdata && pdata->reset) + pdata->reset(UCB_RST_REMOVE); } int ucb1x00_register_driver(struct ucb1x00_driver *drv) @@ -653,7 +648,7 @@ int ucb1x00_register_driver(struct ucb1x00_driver *drv) INIT_LIST_HEAD(&drv->devs); mutex_lock(&ucb1x00_mutex); - list_add(&drv->node, &ucb1x00_drivers); + list_add_tail(&drv->node, &ucb1x00_drivers); list_for_each_entry(ucb, &ucb1x00_devices, node) { ucb1x00_add_dev(ucb, drv); } @@ -674,44 +669,86 @@ void ucb1x00_unregister_driver(struct ucb1x00_driver *drv) mutex_unlock(&ucb1x00_mutex); } -static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state) +static int ucb1x00_suspend(struct device *dev) { - struct ucb1x00 *ucb = mcp_get_drvdata(mcp); - struct ucb1x00_dev *dev; + struct ucb1x00_plat_data *pdata = dev->platform_data; + struct ucb1x00 *ucb = dev_get_drvdata(dev); + struct ucb1x00_dev *udev; mutex_lock(&ucb1x00_mutex); - list_for_each_entry(dev, &ucb->devs, dev_node) { - if (dev->drv->suspend) - dev->drv->suspend(dev, state); + list_for_each_entry(udev, &ucb->devs, dev_node) { + if (udev->drv->suspend) + udev->drv->suspend(udev); } mutex_unlock(&ucb1x00_mutex); + + if (ucb->irq_wake) { + unsigned long flags; + + raw_spin_lock_irqsave(&ucb->irq_lock, flags); + ucb1x00_enable(ucb); + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_wake); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_wake); + ucb1x00_disable(ucb); + raw_spin_unlock_irqrestore(&ucb->irq_lock, flags); + + enable_irq_wake(ucb->irq); + } else if (pdata && pdata->reset) + pdata->reset(UCB_RST_SUSPEND); + return 0; } -static int ucb1x00_resume(struct mcp *mcp) +static int ucb1x00_resume(struct device *dev) { - struct ucb1x00 *ucb = mcp_get_drvdata(mcp); - struct ucb1x00_dev *dev; + struct ucb1x00_plat_data *pdata = dev->platform_data; + struct ucb1x00 *ucb = dev_get_drvdata(dev); + struct ucb1x00_dev *udev; + + if (!ucb->irq_wake && pdata && pdata->reset) + pdata->reset(UCB_RST_RESUME); + ucb1x00_enable(ucb); ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + + if (ucb->irq_wake) { + unsigned long flags; + + raw_spin_lock_irqsave(&ucb->irq_lock, flags); + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); + raw_spin_unlock_irqrestore(&ucb->irq_lock, flags); + + disable_irq_wake(ucb->irq); + } + ucb1x00_disable(ucb); + mutex_lock(&ucb1x00_mutex); - list_for_each_entry(dev, &ucb->devs, dev_node) { - if (dev->drv->resume) - dev->drv->resume(dev); + list_for_each_entry(udev, &ucb->devs, dev_node) { + if (udev->drv->resume) + udev->drv->resume(udev); } mutex_unlock(&ucb1x00_mutex); return 0; } +static const struct dev_pm_ops ucb1x00_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume) +}; + static struct mcp_driver ucb1x00_driver = { .drv = { .name = "ucb1x00", + .owner = THIS_MODULE, + .pm = &ucb1x00_pm_ops, }, .probe = ucb1x00_probe, .remove = ucb1x00_remove, - .suspend = ucb1x00_suspend, - .resume = ucb1x00_resume, }; static int __init ucb1x00_init(void) @@ -742,14 +779,10 @@ EXPORT_SYMBOL(ucb1x00_adc_enable); EXPORT_SYMBOL(ucb1x00_adc_read); EXPORT_SYMBOL(ucb1x00_adc_disable); -EXPORT_SYMBOL(ucb1x00_hook_irq); -EXPORT_SYMBOL(ucb1x00_free_irq); -EXPORT_SYMBOL(ucb1x00_enable_irq); -EXPORT_SYMBOL(ucb1x00_disable_irq); - EXPORT_SYMBOL(ucb1x00_register_driver); EXPORT_SYMBOL(ucb1x00_unregister_driver); +MODULE_ALIAS("mcp:ucb1x00"); MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); MODULE_DESCRIPTION("UCB1x00 core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 63a3cbd..1e0e20c 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -20,8 +20,9 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> -#include <linux/smp.h> +#include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/spinlock.h> #include <linux/completion.h> #include <linux/delay.h> #include <linux/string.h> @@ -32,7 +33,6 @@ #include <linux/kthread.h> #include <linux/mfd/ucb1x00.h> -#include <mach/dma.h> #include <mach/collie.h> #include <asm/mach-types.h> @@ -42,6 +42,8 @@ struct ucb1x00_ts { struct input_dev *idev; struct ucb1x00 *ucb; + spinlock_t irq_lock; + unsigned irq_disabled; wait_queue_head_t irq_wait; struct task_struct *rtask; u16 x_res; @@ -238,7 +240,12 @@ static int ucb1x00_thread(void *_ts) if (ucb1x00_ts_pen_down(ts)) { set_current_state(TASK_INTERRUPTIBLE); - ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING); + spin_lock_irq(&ts->irq_lock); + if (ts->irq_disabled) { + ts->irq_disabled = 0; + enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX); + } + spin_unlock_irq(&ts->irq_lock); ucb1x00_disable(ts->ucb); /* @@ -281,23 +288,37 @@ static int ucb1x00_thread(void *_ts) * We only detect touch screen _touches_ with this interrupt * handler, and even then we just schedule our task. */ -static void ucb1x00_ts_irq(int idx, void *id) +static irqreturn_t ucb1x00_ts_irq(int irq, void *id) { struct ucb1x00_ts *ts = id; - ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING); + spin_lock(&ts->irq_lock); + ts->irq_disabled = 1; + disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX); + spin_unlock(&ts->irq_lock); wake_up(&ts->irq_wait); + + return IRQ_HANDLED; } static int ucb1x00_ts_open(struct input_dev *idev) { struct ucb1x00_ts *ts = input_get_drvdata(idev); + unsigned long flags = 0; int ret = 0; BUG_ON(ts->rtask); + if (machine_is_collie()) + flags = IRQF_TRIGGER_RISING; + else + flags = IRQF_TRIGGER_FALLING; + + ts->irq_disabled = 0; + init_waitqueue_head(&ts->irq_wait); - ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts); + ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq, + flags, "ucb1x00-ts", ts); if (ret < 0) goto out; @@ -314,7 +335,7 @@ static int ucb1x00_ts_open(struct input_dev *idev) if (!IS_ERR(ts->rtask)) { ret = 0; } else { - ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); + free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts); ts->rtask = NULL; ret = -EFAULT; } @@ -334,7 +355,7 @@ static void ucb1x00_ts_close(struct input_dev *idev) kthread_stop(ts->rtask); ucb1x00_enable(ts->ucb); - ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); + free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts); ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0); ucb1x00_disable(ts->ucb); } @@ -359,11 +380,13 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) ts->ucb = dev->ucb; ts->idev = idev; ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; + spin_lock_init(&ts->irq_lock); idev->name = "Touchscreen panel"; idev->id.product = ts->ucb->id; idev->open = ucb1x00_ts_open; idev->close = ucb1x00_ts_close; + idev->dev.parent = &ts->ucb->dev; idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c index 745c879..4bceee9 100644 --- a/drivers/mfd/wm831x-spi.c +++ b/drivers/mfd/wm831x-spi.c @@ -89,7 +89,7 @@ static const struct spi_device_id wm831x_spi_ids[] = { { "wm8326", WM8326 }, { }, }; -MODULE_DEVICE_TABLE(spi, wm831x_spi_id); +MODULE_DEVICE_TABLE(spi, wm831x_spi_ids); static struct spi_driver wm831x_spi_driver = { .driver = { diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 237764a..1189a17 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -271,8 +271,7 @@ static int wm8400_init(struct wm8400 *wm8400, return -EIO; } if (i != reg_data[WM8400_RESET_ID].default_val) { - dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n", - reg); + dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n", i); return -ENODEV; } diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 98733d4..9d7ca1e 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -639,7 +639,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq) } pm_runtime_enable(wm8994->dev); - pm_runtime_resume(wm8994->dev); + pm_runtime_idle(wm8994->dev); return 0; diff --git a/drivers/mfd/wm8994-regmap.c b/drivers/mfd/wm8994-regmap.c index 7605b60..bfd25af 100644 --- a/drivers/mfd/wm8994-regmap.c +++ b/drivers/mfd/wm8994-regmap.c @@ -20,7 +20,6 @@ #include "wm8994.h" static struct reg_default wm1811_defaults[] = { - { 0x0000, 0x1811 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -61,7 +60,7 @@ static struct reg_default wm1811_defaults[] = { { 0x0036, 0x0000 }, /* R54 - Speaker Mixer */ { 0x0037, 0x0000 }, /* R55 - Additional Control */ { 0x0038, 0x0000 }, /* R56 - AntiPOP (1) */ - { 0x0039, 0x0180 }, /* R57 - AntiPOP (2) */ + { 0x0039, 0x0000 }, /* R57 - AntiPOP (2) */ { 0x003B, 0x000D }, /* R59 - LDO 1 */ { 0x003C, 0x0003 }, /* R60 - LDO 2 */ { 0x003D, 0x0039 }, /* R61 - MICBIAS1 */ @@ -69,16 +68,12 @@ static struct reg_default wm1811_defaults[] = { { 0x004C, 0x1F25 }, /* R76 - Charge Pump (1) */ { 0x004D, 0xAB19 }, /* R77 - Charge Pump (2) */ { 0x0051, 0x0004 }, /* R81 - Class W (1) */ - { 0x0054, 0x0000 }, /* R84 - DC Servo (1) */ { 0x0055, 0x054A }, /* R85 - DC Servo (2) */ - { 0x0058, 0x0000 }, /* R88 - DC Servo Readback */ { 0x0059, 0x0000 }, /* R89 - DC Servo (4) */ { 0x0060, 0x0000 }, /* R96 - Analogue HP (1) */ { 0x00C5, 0x0000 }, /* R197 - Class D Test (5) */ { 0x00D0, 0x7600 }, /* R208 - Mic Detect 1 */ { 0x00D1, 0x007F }, /* R209 - Mic Detect 2 */ - { 0x00D2, 0x0000 }, /* R210 - Mic Detect 3 */ - { 0x0100, 0x0100 }, /* R256 - Chip Revision */ { 0x0101, 0x8004 }, /* R257 - Control Interface */ { 0x0200, 0x0000 }, /* R512 - AIF1 Clocking (1) */ { 0x0201, 0x0000 }, /* R513 - AIF1 Clocking (2) */ @@ -88,7 +83,6 @@ static struct reg_default wm1811_defaults[] = { { 0x0209, 0x0000 }, /* R521 - Clocking (2) */ { 0x0210, 0x0083 }, /* R528 - AIF1 Rate */ { 0x0211, 0x0083 }, /* R529 - AIF2 Rate */ - { 0x0212, 0x0000 }, /* R530 - Rate Status */ { 0x0220, 0x0000 }, /* R544 - FLL1 Control (1) */ { 0x0221, 0x0000 }, /* R545 - FLL1 Control (2) */ { 0x0222, 0x0000 }, /* R546 - FLL1 Control (3) */ @@ -218,8 +212,6 @@ static struct reg_default wm1811_defaults[] = { { 0x070A, 0xA101 }, /* R1802 - GPIO 11 */ { 0x0720, 0x0000 }, /* R1824 - Pull Control (1) */ { 0x0721, 0x0156 }, /* R1825 - Pull Control (2) */ - { 0x0730, 0x0000 }, /* R1840 - Interrupt Status 1 */ - { 0x0731, 0x0000 }, /* R1841 - Interrupt Status 2 */ { 0x0732, 0x0000 }, /* R1842 - Interrupt Raw Status 2 */ { 0x0738, 0x07FF }, /* R1848 - Interrupt Status 1 Mask */ { 0x0739, 0xDFEF }, /* R1849 - Interrupt Status 2 Mask */ @@ -228,7 +220,6 @@ static struct reg_default wm1811_defaults[] = { }; static struct reg_default wm8994_defaults[] = { - { 0x0000, 0x8994 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -275,12 +266,9 @@ static struct reg_default wm8994_defaults[] = { { 0x003C, 0x0003 }, /* R60 - LDO 2 */ { 0x004C, 0x1F25 }, /* R76 - Charge Pump (1) */ { 0x0051, 0x0004 }, /* R81 - Class W (1) */ - { 0x0054, 0x0000 }, /* R84 - DC Servo (1) */ { 0x0055, 0x054A }, /* R85 - DC Servo (2) */ { 0x0057, 0x0000 }, /* R87 - DC Servo (4) */ - { 0x0058, 0x0000 }, /* R88 - DC Servo Readback */ { 0x0060, 0x0000 }, /* R96 - Analogue HP (1) */ - { 0x0100, 0x0003 }, /* R256 - Chip Revision */ { 0x0101, 0x8004 }, /* R257 - Control Interface */ { 0x0110, 0x0000 }, /* R272 - Write Sequencer Ctrl (1) */ { 0x0111, 0x0000 }, /* R273 - Write Sequencer Ctrl (2) */ @@ -292,7 +280,6 @@ static struct reg_default wm8994_defaults[] = { { 0x0209, 0x0000 }, /* R521 - Clocking (2) */ { 0x0210, 0x0083 }, /* R528 - AIF1 Rate */ { 0x0211, 0x0083 }, /* R529 - AIF2 Rate */ - { 0x0212, 0x0000 }, /* R530 - Rate Status */ { 0x0220, 0x0000 }, /* R544 - FLL1 Control (1) */ { 0x0221, 0x0000 }, /* R545 - FLL1 Control (2) */ { 0x0222, 0x0000 }, /* R546 - FLL1 Control (3) */ @@ -445,9 +432,6 @@ static struct reg_default wm8994_defaults[] = { { 0x070A, 0xA101 }, /* R1802 - GPIO 11 */ { 0x0720, 0x0000 }, /* R1824 - Pull Control (1) */ { 0x0721, 0x0156 }, /* R1825 - Pull Control (2) */ - { 0x0730, 0x0000 }, /* R1840 - Interrupt Status 1 */ - { 0x0731, 0x0000 }, /* R1841 - Interrupt Status 2 */ - { 0x0732, 0x0000 }, /* R1842 - Interrupt Raw Status 2 */ { 0x0738, 0x07FF }, /* R1848 - Interrupt Status 1 Mask */ { 0x0739, 0xFFFF }, /* R1849 - Interrupt Status 2 Mask */ { 0x0740, 0x0000 }, /* R1856 - Interrupt Control */ @@ -455,7 +439,6 @@ static struct reg_default wm8994_defaults[] = { }; static struct reg_default wm8958_defaults[] = { - { 0x0000, 0x8958 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -970,6 +953,7 @@ static bool wm8994_readable_register(struct device *dev, unsigned int reg) { switch (reg) { case WM8994_DC_SERVO_READBACK: + case WM8994_MICBIAS: case WM8994_WRITE_SEQUENCER_CTRL_1: case WM8994_WRITE_SEQUENCER_CTRL_2: case WM8994_AIF1_ADC2_LEFT_VOLUME: diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h index d95587c..04d5170 100644 --- a/drivers/misc/sgi-gru/gru_instructions.h +++ b/drivers/misc/sgi-gru/gru_instructions.h @@ -40,6 +40,7 @@ extern void gru_wait_abort_proc(void *cb); *((volatile unsigned long *)(p)) = v; /* force st.rel */ \ } while (0) #elif defined(CONFIG_X86_64) +#include <asm/cacheflush.h> #define __flush_cache(p) clflush(p) #define gru_ordered_store_ulong(p, v) \ do { \ diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 851b2f2..c862cd4 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -25,7 +25,6 @@ #endif #if defined CONFIG_IA64 -#include <asm/system.h> #include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */ #define is_shub() ia64_platform_is("sn2") #endif diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index e5a3c7b..eed213a 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -41,7 +41,6 @@ #include <linux/mmc/mmc.h> #include <linux/mmc/sd.h> -#include <asm/system.h> #include <asm/uaccess.h> #include "queue.h" @@ -1080,6 +1079,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_blk_request *brq = &mqrq->brq; struct request *req = mqrq->req; struct mmc_blk_data *md = mq->data; + bool do_data_tag; /* * Reliable writes are used to implement Forced Unit Access and @@ -1156,6 +1156,16 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, mmc_apply_rel_rw(brq, card, req); /* + * Data tag is used only during writing meta data to speed + * up write and any subsequent read of this meta data + */ + do_data_tag = (card->ext_csd.data_tag_unit_size) && + (req->cmd_flags & REQ_META) && + (rq_data_dir(req) == WRITE) && + ((brq->data.blocks * brq->data.blksz) >= + card->ext_csd.data_tag_unit_size); + + /* * Pre-defined multi-block transfers are preferable to * open ended-ones (and necessary for reliable writes). * However, it is not sufficient to just send CMD23, @@ -1173,13 +1183,13 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, * We'll avoid using CMD23-bounded multiblock writes for * these, while retaining features like reliable writes. */ - - if ((md->flags & MMC_BLK_CMD23) && - mmc_op_multi(brq->cmd.opcode) && - (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23))) { + if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) && + (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) || + do_data_tag)) { brq->sbc.opcode = MMC_SET_BLOCK_COUNT; brq->sbc.arg = brq->data.blocks | - (do_rel_wr ? (1 << 31) : 0); + (do_rel_wr ? (1 << 31) : 0) | + (do_data_tag ? (1 << 29) : 0); brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; brq->mrq.sbc = &brq->sbc; } diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c index 082202a..29de31e 100644 --- a/drivers/mmc/core/cd-gpio.c +++ b/drivers/mmc/core/cd-gpio.c @@ -28,13 +28,17 @@ static irqreturn_t mmc_cd_gpio_irqt(int irq, void *dev_id) return IRQ_HANDLED; } -int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, - unsigned int irq, unsigned long flags) +int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio) { size_t len = strlen(dev_name(host->parent)) + 4; - struct mmc_cd_gpio *cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL); + struct mmc_cd_gpio *cd; + int irq = gpio_to_irq(gpio); int ret; + if (irq < 0) + return irq; + + cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL); if (!cd) return -ENOMEM; @@ -45,7 +49,8 @@ int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, goto egpioreq; ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt, - flags, cd->label, host); + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + cd->label, host); if (ret < 0) goto eirqreq; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 132378b..14f262e 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -188,6 +188,12 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) struct scatterlist *sg; #endif + if (mrq->sbc) { + pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n", + mmc_hostname(host), mrq->sbc->opcode, + mrq->sbc->arg, mrq->sbc->flags); + } + pr_debug("%s: starting CMD%u arg %08x flags %08x\n", mmc_hostname(host), mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags); @@ -243,16 +249,17 @@ static void mmc_wait_done(struct mmc_request *mrq) complete(&mrq->completion); } -static void __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) +static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) { init_completion(&mrq->completion); mrq->done = mmc_wait_done; if (mmc_card_removed(host->card)) { mrq->cmd->error = -ENOMEDIUM; complete(&mrq->completion); - return; + return -ENOMEDIUM; } mmc_start_request(host, mrq); + return 0; } static void mmc_wait_for_req_done(struct mmc_host *host, @@ -336,6 +343,7 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host, struct mmc_async_req *areq, int *error) { int err = 0; + int start_err = 0; struct mmc_async_req *data = host->areq; /* Prepare a new request */ @@ -345,30 +353,23 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host, if (host->areq) { mmc_wait_for_req_done(host, host->areq->mrq); err = host->areq->err_check(host->card, host->areq); - if (err) { - /* post process the completed failed request */ - mmc_post_req(host, host->areq->mrq, 0); - if (areq) - /* - * Cancel the new prepared request, because - * it can't run until the failed - * request has been properly handled. - */ - mmc_post_req(host, areq->mrq, -EINVAL); - - host->areq = NULL; - goto out; - } } - if (areq) - __mmc_start_req(host, areq->mrq); + if (!err && areq) + start_err = __mmc_start_req(host, areq->mrq); if (host->areq) mmc_post_req(host, host->areq->mrq, 0); - host->areq = areq; - out: + /* Cancel a prepared request if it was not started. */ + if ((err || start_err) && areq) + mmc_post_req(host, areq->mrq, -EINVAL); + + if (err) + host->areq = NULL; + else + host->areq = areq; + if (error) *error = err; return data; @@ -599,105 +600,6 @@ unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) EXPORT_SYMBOL(mmc_align_data_size); /** - * mmc_host_enable - enable a host. - * @host: mmc host to enable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_enable(struct mmc_host *host) -{ - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (host->nesting_cnt++) - return 0; - - cancel_delayed_work_sync(&host->disable); - - if (host->enabled) - return 0; - - if (host->ops->enable) { - int err; - - host->en_dis_recurs = 1; - mmc_host_clk_hold(host); - err = host->ops->enable(host); - mmc_host_clk_release(host); - host->en_dis_recurs = 0; - - if (err) { - pr_debug("%s: enable error %d\n", - mmc_hostname(host), err); - return err; - } - } - host->enabled = 1; - return 0; -} -EXPORT_SYMBOL(mmc_host_enable); - -static int mmc_host_do_disable(struct mmc_host *host, int lazy) -{ - if (host->ops->disable) { - int err; - - host->en_dis_recurs = 1; - mmc_host_clk_hold(host); - err = host->ops->disable(host, lazy); - mmc_host_clk_release(host); - host->en_dis_recurs = 0; - - if (err < 0) { - pr_debug("%s: disable error %d\n", - mmc_hostname(host), err); - return err; - } - if (err > 0) { - unsigned long delay = msecs_to_jiffies(err); - - mmc_schedule_delayed_work(&host->disable, delay); - } - } - host->enabled = 0; - return 0; -} - -/** - * mmc_host_disable - disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_disable(struct mmc_host *host) -{ - int err; - - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - err = mmc_host_do_disable(host, 0); - return err; -} -EXPORT_SYMBOL(mmc_host_disable); - -/** * __mmc_claim_host - exclusively claim a host * @host: mmc host to claim * @abort: whether or not the operation should be aborted @@ -735,8 +637,8 @@ int __mmc_claim_host(struct mmc_host *host, atomic_t *abort) wake_up(&host->wq); spin_unlock_irqrestore(&host->lock, flags); remove_wait_queue(&host->wq, &wait); - if (!stop) - mmc_host_enable(host); + if (host->ops->enable && !stop && host->claim_cnt == 1) + host->ops->enable(host); return stop; } @@ -761,21 +663,28 @@ int mmc_try_claim_host(struct mmc_host *host) claimed_host = 1; } spin_unlock_irqrestore(&host->lock, flags); + if (host->ops->enable && claimed_host && host->claim_cnt == 1) + host->ops->enable(host); return claimed_host; } EXPORT_SYMBOL(mmc_try_claim_host); /** - * mmc_do_release_host - release a claimed host + * mmc_release_host - release a host * @host: mmc host to release * - * If you successfully claimed a host, this function will - * release it again. + * Release a MMC host, allowing others to claim the host + * for their operations. */ -void mmc_do_release_host(struct mmc_host *host) +void mmc_release_host(struct mmc_host *host) { unsigned long flags; + WARN_ON(!host->claimed); + + if (host->ops->disable && host->claim_cnt == 1) + host->ops->disable(host); + spin_lock_irqsave(&host->lock, flags); if (--host->claim_cnt) { /* Release for nested claim */ @@ -787,67 +696,6 @@ void mmc_do_release_host(struct mmc_host *host) wake_up(&host->wq); } } -EXPORT_SYMBOL(mmc_do_release_host); - -void mmc_host_deeper_disable(struct work_struct *work) -{ - struct mmc_host *host = - container_of(work, struct mmc_host, disable.work); - - /* If the host is claimed then we do not want to disable it anymore */ - if (!mmc_try_claim_host(host)) - return; - mmc_host_do_disable(host, 1); - mmc_do_release_host(host); -} - -/** - * mmc_host_lazy_disable - lazily disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_lazy_disable(struct mmc_host *host) -{ - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - if (host->disable_delay) { - mmc_schedule_delayed_work(&host->disable, - msecs_to_jiffies(host->disable_delay)); - return 0; - } else - return mmc_host_do_disable(host, 1); -} -EXPORT_SYMBOL(mmc_host_lazy_disable); - -/** - * mmc_release_host - release a host - * @host: mmc host to release - * - * Release a MMC host, allowing others to claim the host - * for their operations. - */ -void mmc_release_host(struct mmc_host *host) -{ - WARN_ON(!host->claimed); - - mmc_host_lazy_disable(host); - - mmc_do_release_host(host); -} - EXPORT_SYMBOL(mmc_release_host); /* @@ -2115,18 +1963,36 @@ int _mmc_detect_card_removed(struct mmc_host *host) int mmc_detect_card_removed(struct mmc_host *host) { struct mmc_card *card = host->card; + int ret; WARN_ON(!host->claimed); + + if (!card) + return 1; + + ret = mmc_card_removed(card); /* * The card will be considered unchanged unless we have been asked to * detect a change or host requires polling to provide card detection. */ - if (card && !host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL)) - return mmc_card_removed(card); + if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL) && + !(host->caps2 & MMC_CAP2_DETECT_ON_ERR)) + return ret; host->detect_change = 0; + if (!ret) { + ret = _mmc_detect_card_removed(host); + if (ret && (host->caps2 & MMC_CAP2_DETECT_ON_ERR)) { + /* + * Schedule a detect work as soon as possible to let a + * rescan handle the card removal. + */ + cancel_delayed_work(&host->detect); + mmc_detect_change(host, 0); + } + } - return _mmc_detect_card_removed(host); + return ret; } EXPORT_SYMBOL(mmc_detect_card_removed); @@ -2203,8 +2069,6 @@ void mmc_stop_host(struct mmc_host *host) spin_unlock_irqrestore(&host->lock, flags); #endif - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); cancel_delayed_work_sync(&host->detect); mmc_flush_scheduled_work(); @@ -2399,13 +2263,11 @@ int mmc_suspend_host(struct mmc_host *host) { int err = 0; - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); cancel_delayed_work(&host->detect); mmc_flush_scheduled_work(); if (mmc_try_claim_host(host)) { err = mmc_cache_ctrl(host, 0); - mmc_do_release_host(host); + mmc_release_host(host); } else { err = -EBUSY; } @@ -2426,7 +2288,7 @@ int mmc_suspend_host(struct mmc_host *host) if (host->bus_ops->suspend) { err = host->bus_ops->suspend(host); } - mmc_do_release_host(host); + mmc_release_host(host); if (err == -ENOSYS || !host->bus_ops->resume) { /* diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index c3704e2..91c84c7 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -330,7 +330,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); - INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable); #ifdef CONFIG_PM host->pm_notify.notifier_call = mmc_pm_notify; #endif diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h index 08a7852..f2ab9e5 100644 --- a/drivers/mmc/core/host.h +++ b/drivers/mmc/core/host.h @@ -14,7 +14,6 @@ int mmc_register_host_class(void); void mmc_unregister_host_class(void); -void mmc_host_deeper_disable(struct work_struct *work); #endif diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2b9ed14..02914d6 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -519,6 +519,20 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + + if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1) + card->ext_csd.data_sector_size = 4096; + else + card->ext_csd.data_sector_size = 512; + + if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) && + (ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) { + card->ext_csd.data_tag_unit_size = + ((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) * + (card->ext_csd.data_sector_size); + } else { + card->ext_csd.data_tag_unit_size = 0; + } } out: @@ -938,7 +952,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF * bit. This bit will be lost every time after a reset or power off. */ - if (card->ext_csd.enhanced_area_en) { + if (card->ext_csd.enhanced_area_en || + (card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_ERASE_GROUP_DEF, 1, card->ext_csd.generic_cmd6_time); @@ -1033,22 +1048,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* - * Enable HPI feature (if supported) - */ - if (card->ext_csd.hpi) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HPI_MGMT, 1, 0); - if (err && err != -EBADMSG) - goto free_card; - if (err) { - pr_warning("%s: Enabling HPI failed\n", - mmc_hostname(card->host)); - err = 0; - } else - card->ext_csd.hpi_en = 1; - } - - /* * Compute bus speed. */ max_dtr = (unsigned int)-1; @@ -1097,9 +1096,12 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * 4. execute tuning for HS200 */ if ((host->caps2 & MMC_CAP2_HS200) && - card->host->ops->execute_tuning) + card->host->ops->execute_tuning) { + mmc_host_clk_hold(card->host); err = card->host->ops->execute_tuning(card->host, MMC_SEND_TUNING_BLOCK_HS200); + mmc_host_clk_release(card->host); + } if (err) { pr_warning("%s: tuning execution failed\n", mmc_hostname(card->host)); @@ -1219,6 +1221,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* + * Enable HPI feature (if supported) + */ + if (card->ext_csd.hpi) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HPI_MGMT, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warning("%s: Enabling HPI failed\n", + mmc_hostname(card->host)); + err = 0; + } else + card->ext_csd.hpi_en = 1; + } + + /* * If cache size is higher than 0, this indicates * the existence of cache and it can be turned on. */ diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 4d41fa9..69370f4 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -553,18 +553,22 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status) { struct mmc_command cmd = {0}; unsigned int opcode; - unsigned int flags; int err; + if (!card->ext_csd.hpi) { + pr_warning("%s: Card didn't support HPI command\n", + mmc_hostname(card->host)); + return -EINVAL; + } + opcode = card->ext_csd.hpi_cmd; if (opcode == MMC_STOP_TRANSMISSION) - flags = MMC_RSP_R1 | MMC_CMD_AC; + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; else if (opcode == MMC_SEND_STATUS) - flags = MMC_RSP_R1 | MMC_CMD_AC; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; cmd.opcode = opcode; cmd.arg = card->rca << 16 | 1; - cmd.flags = flags; cmd.cmd_timeout_ms = card->ext_csd.out_of_int_time; err = mmc_wait_for_cmd(card->host, &cmd, 0); diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index ecbee9b..2bc06e7 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -533,6 +533,31 @@ config MMC_DW_IDMAC Designware Mobile Storage IP block. This disables the external DMA interface. +config MMC_DW_PLTFM + tristate "Synopsys Designware MCI Support as platform device" + depends on MMC_DW + default y + help + This selects the common helper functions support for Host Controller + Interface based platform driver. Please select this option if the IP + is present as a platform device. This is the common interface for the + Synopsys Designware IP. + + If you have a controller with this interface, say Y or M here. + + If unsure, say Y. + +config MMC_DW_PCI + tristate "Synopsys Designware MCI support on PCI bus" + depends on MMC_DW && PCI + help + This selects the PCI bus for the Synopsys Designware Mobile Storage IP. + Select this option if the IP is present on PCI platform. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE) diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 745f8fc..3e7e26d 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -39,6 +39,8 @@ obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o obj-$(CONFIG_MMC_DW) += dw_mmc.o +obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o +obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_VUB300) += vub300.o diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index e4449a5..9819dc0 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -24,6 +24,7 @@ #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/stat.h> +#include <linux/types.h> #include <linux/mmc/host.h> #include <linux/mmc/sdio.h> @@ -173,6 +174,7 @@ struct atmel_mci { struct atmel_mci_dma dma; struct dma_chan *data_chan; + struct dma_slave_config dma_conf; u32 cmd_status; u32 data_status; @@ -863,16 +865,17 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { direction = DMA_FROM_DEVICE; - slave_dirn = DMA_DEV_TO_MEM; + host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; } else { direction = DMA_TO_DEVICE; - slave_dirn = DMA_MEM_TO_DEV; + host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; } sglen = dma_map_sg(chan->device->dev, data->sg, data->sg_len, direction); - desc = chan->device->device_prep_slave_sg(chan, + dmaengine_slave_config(chan, &host->dma_conf); + desc = dmaengine_prep_slave_sg(chan, data->sg, sglen, slave_dirn, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) @@ -1960,10 +1963,6 @@ static bool atmci_configure_dma(struct atmel_mci *host) if (pdata && find_slave_dev(pdata->dma_slave)) { dma_cap_mask_t mask; - setup_dma_addr(pdata->dma_slave, - host->mapbase + ATMCI_TDR, - host->mapbase + ATMCI_RDR); - /* Try to grab a DMA channel */ dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); @@ -1975,8 +1974,16 @@ static bool atmci_configure_dma(struct atmel_mci *host) return false; } else { dev_info(&host->pdev->dev, - "Using %s for DMA transfers\n", + "using %s for DMA transfers\n", dma_chan_name(host->dma.chan)); + + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.src_maxburst = 1; + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.dst_maxburst = 1; + host->dma_conf.device_fc = false; return true; } } diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 64a8325..c1f3673 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -160,6 +160,16 @@ module_param(rw_threshold, uint, S_IRUGO); MODULE_PARM_DESC(rw_threshold, "Read/Write threshold. Default = 32"); +static unsigned poll_threshold = 128; +module_param(poll_threshold, uint, S_IRUGO); +MODULE_PARM_DESC(poll_threshold, + "Polling transaction size threshold. Default = 128"); + +static unsigned poll_loopcount = 32; +module_param(poll_loopcount, uint, S_IRUGO); +MODULE_PARM_DESC(poll_loopcount, + "Maximum polling loop count. Default = 32"); + static unsigned __initdata use_dma = 1; module_param(use_dma, uint, 0); MODULE_PARM_DESC(use_dma, "Whether to use DMA or not. Default = 1"); @@ -193,6 +203,7 @@ struct mmc_davinci_host { bool use_dma; bool do_dma; bool sdio_int; + bool active_request; /* Scatterlist DMA uses one or more parameter RAM entries: * the main one (associated with rxdma or txdma) plus zero or @@ -219,6 +230,7 @@ struct mmc_davinci_host { #endif }; +static irqreturn_t mmc_davinci_irq(int irq, void *dev_id); /* PIO only */ static void mmc_davinci_sg_to_buf(struct mmc_davinci_host *host) @@ -376,7 +388,20 @@ static void mmc_davinci_start_command(struct mmc_davinci_host *host, writel(cmd->arg, host->base + DAVINCI_MMCARGHL); writel(cmd_reg, host->base + DAVINCI_MMCCMD); - writel(im_val, host->base + DAVINCI_MMCIM); + + host->active_request = true; + + if (!host->do_dma && host->bytes_left <= poll_threshold) { + u32 count = poll_loopcount; + + while (host->active_request && count--) { + mmc_davinci_irq(0, host); + cpu_relax(); + } + } + + if (host->active_request) + writel(im_val, host->base + DAVINCI_MMCIM); } /*----------------------------------------------------------------------*/ @@ -915,6 +940,7 @@ mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data) if (!data->stop || (host->cmd && host->cmd->error)) { mmc_request_done(host->mmc, data->mrq); writel(0, host->base + DAVINCI_MMCIM); + host->active_request = false; } else mmc_davinci_start_command(host, data->stop); } @@ -942,6 +968,7 @@ static void mmc_davinci_cmd_done(struct mmc_davinci_host *host, cmd->mrq->cmd->retries = 0; mmc_request_done(host->mmc, cmd->mrq); writel(0, host->base + DAVINCI_MMCIM); + host->active_request = false; } } @@ -1009,12 +1036,33 @@ static irqreturn_t mmc_davinci_irq(int irq, void *dev_id) * by read. So, it is not unbouned loop even in the case of * non-dma. */ - while (host->bytes_left && (status & (MMCST0_DXRDY | MMCST0_DRRDY))) { - davinci_fifo_data_trans(host, rw_threshold); - status = readl(host->base + DAVINCI_MMCST0); - if (!status) - break; - qstatus |= status; + if (host->bytes_left && (status & (MMCST0_DXRDY | MMCST0_DRRDY))) { + unsigned long im_val; + + /* + * If interrupts fire during the following loop, they will be + * handled by the handler, but the PIC will still buffer these. + * As a result, the handler will be called again to serve these + * needlessly. In order to avoid these spurious interrupts, + * keep interrupts masked during the loop. + */ + im_val = readl(host->base + DAVINCI_MMCIM); + writel(0, host->base + DAVINCI_MMCIM); + + do { + davinci_fifo_data_trans(host, rw_threshold); + status = readl(host->base + DAVINCI_MMCST0); + qstatus |= status; + } while (host->bytes_left && + (status & (MMCST0_DXRDY | MMCST0_DRRDY))); + + /* + * If an interrupt is pending, it is assumed it will fire when + * it is unmasked. This assumption is also taken when the MMCIM + * is first set. Otherwise, writing to MMCIM after reading the + * status is race-prone. + */ + writel(im_val, host->base + DAVINCI_MMCIM); } if (qstatus & MMCST0_DATDNE) { @@ -1418,17 +1466,14 @@ static int davinci_mmcsd_suspend(struct device *dev) struct mmc_davinci_host *host = platform_get_drvdata(pdev); int ret; - mmc_host_enable(host->mmc); ret = mmc_suspend_host(host->mmc); if (!ret) { writel(0, host->base + DAVINCI_MMCIM); mmc_davinci_reset_ctrl(host, 1); - mmc_host_disable(host->mmc); clk_disable(host->clk); host->suspended = 1; } else { host->suspended = 0; - mmc_host_disable(host->mmc); } return ret; @@ -1444,7 +1489,6 @@ static int davinci_mmcsd_resume(struct device *dev) return 0; clk_enable(host->clk); - mmc_host_enable(host->mmc); mmc_davinci_reset_ctrl(host, 0); ret = mmc_resume_host(host->mmc); diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c new file mode 100644 index 0000000..dc0d25a --- /dev/null +++ b/drivers/mmc/host/dw_mmc-pci.c @@ -0,0 +1,158 @@ +/* + * Synopsys DesignWare Multimedia Card PCI Interface driver + * + * Copyright (C) 2012 Vayavya Labs Pvt. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/dw_mmc.h> +#include "dw_mmc.h" + +#define PCI_BAR_NO 2 +#define COMPLETE_BAR 0 +#define SYNOPSYS_DW_MCI_VENDOR_ID 0x700 +#define SYNOPSYS_DW_MCI_DEVICE_ID 0x1107 +/* Defining the Capabilities */ +#define DW_MCI_CAPABILITIES (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED |\ + MMC_CAP_SD_HIGHSPEED | MMC_CAP_8_BIT_DATA |\ + MMC_CAP_SDIO_IRQ) + +static struct dw_mci_board pci_board_data = { + .num_slots = 1, + .caps = DW_MCI_CAPABILITIES, + .bus_hz = 33 * 1000 * 1000, + .detect_delay_ms = 200, + .fifo_depth = 32, +}; + +static int __devinit dw_mci_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *entries) +{ + struct dw_mci *host; + int ret; + + ret = pci_enable_device(pdev); + if (ret) + return ret; + if (pci_request_regions(pdev, "dw_mmc_pci")) { + ret = -ENODEV; + goto err_disable_dev; + } + + host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL); + if (!host) { + ret = -ENOMEM; + goto err_release; + } + + host->irq = pdev->irq; + host->irq_flags = IRQF_SHARED; + host->dev = pdev->dev; + host->pdata = &pci_board_data; + + host->regs = pci_iomap(pdev, PCI_BAR_NO, COMPLETE_BAR); + if (!host->regs) { + ret = -EIO; + goto err_unmap; + } + + pci_set_drvdata(pdev, host); + ret = dw_mci_probe(host); + if (ret) + goto err_probe_failed; + return ret; + +err_probe_failed: + pci_iounmap(pdev, host->regs); +err_unmap: + kfree(host); +err_release: + pci_release_regions(pdev); +err_disable_dev: + pci_disable_device(pdev); + return ret; +} + +static void __devexit dw_mci_pci_remove(struct pci_dev *pdev) +{ + struct dw_mci *host = pci_get_drvdata(pdev); + + dw_mci_remove(host); + pci_set_drvdata(pdev, NULL); + pci_release_regions(pdev); + pci_iounmap(pdev, host->regs); + kfree(host); + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM_SLEEP +static int dw_mci_pci_suspend(struct device *dev) +{ + int ret; + struct pci_dev *pdev = to_pci_dev(dev); + struct dw_mci *host = pci_get_drvdata(pdev); + + ret = dw_mci_suspend(host); + return ret; +} + +static int dw_mci_pci_resume(struct device *dev) +{ + int ret; + struct pci_dev *pdev = to_pci_dev(dev); + struct dw_mci *host = pci_get_drvdata(pdev); + + ret = dw_mci_resume(host); + return ret; +} +#else +#define dw_mci_pci_suspend NULL +#define dw_mci_pci_resume NULL +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(dw_mci_pci_pmops, dw_mci_pci_suspend, dw_mci_pci_resume); + +static DEFINE_PCI_DEVICE_TABLE(dw_mci_pci_id) = { + { PCI_DEVICE(SYNOPSYS_DW_MCI_VENDOR_ID, SYNOPSYS_DW_MCI_DEVICE_ID) }, + {} +}; +MODULE_DEVICE_TABLE(pci, dw_mci_pci_id); + +static struct pci_driver dw_mci_pci_driver = { + .name = "dw_mmc_pci", + .id_table = dw_mci_pci_id, + .probe = dw_mci_pci_probe, + .remove = dw_mci_pci_remove, + .driver = { + .pm = &dw_mci_pci_pmops + }, +}; + +static int __init dw_mci_init(void) +{ + return pci_register_driver(&dw_mci_pci_driver); +} + +static void __exit dw_mci_exit(void) +{ + pci_unregister_driver(&dw_mci_pci_driver); +} + +module_init(dw_mci_init); +module_exit(dw_mci_exit); + +MODULE_DESCRIPTION("DW Multimedia Card PCI Interface driver"); +MODULE_AUTHOR("Shashidhar Hiremath <shashidharh@vayavyalabs.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c new file mode 100644 index 0000000..92ec3eb --- /dev/null +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -0,0 +1,134 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/dw_mmc.h> +#include "dw_mmc.h" + +static int dw_mci_pltfm_probe(struct platform_device *pdev) +{ + struct dw_mci *host; + struct resource *regs; + int ret; + + host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL); + if (!host) + return -ENOMEM; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + ret = -ENXIO; + goto err_free; + } + + host->irq = platform_get_irq(pdev, 0); + if (host->irq < 0) { + ret = host->irq; + goto err_free; + } + + host->dev = pdev->dev; + host->irq_flags = 0; + host->pdata = pdev->dev.platform_data; + ret = -ENOMEM; + host->regs = ioremap(regs->start, resource_size(regs)); + if (!host->regs) + goto err_free; + platform_set_drvdata(pdev, host); + ret = dw_mci_probe(host); + if (ret) + goto err_out; + return ret; +err_out: + iounmap(host->regs); +err_free: + kfree(host); + return ret; +} + +static int __exit dw_mci_pltfm_remove(struct platform_device *pdev) +{ + struct dw_mci *host = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + dw_mci_remove(host); + iounmap(host->regs); + kfree(host); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +/* + * TODO: we should probably disable the clock to the card in the suspend path. + */ +static int dw_mci_pltfm_suspend(struct device *dev) +{ + int ret; + struct dw_mci *host = dev_get_drvdata(dev); + + ret = dw_mci_suspend(host); + if (ret) + return ret; + + return 0; +} + +static int dw_mci_pltfm_resume(struct device *dev) +{ + int ret; + struct dw_mci *host = dev_get_drvdata(dev); + + ret = dw_mci_resume(host); + if (ret) + return ret; + + return 0; +} +#else +#define dw_mci_pltfm_suspend NULL +#define dw_mci_pltfm_resume NULL +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume); + +static struct platform_driver dw_mci_pltfm_driver = { + .remove = __exit_p(dw_mci_pltfm_remove), + .driver = { + .name = "dw_mmc", + .pm = &dw_mci_pltfm_pmops, + }, +}; + +static int __init dw_mci_init(void) +{ + return platform_driver_probe(&dw_mci_pltfm_driver, dw_mci_pltfm_probe); +} + +static void __exit dw_mci_exit(void) +{ + platform_driver_unregister(&dw_mci_pltfm_driver); +} + +module_init(dw_mci_init); +module_exit(dw_mci_exit); + +MODULE_DESCRIPTION("DW Multimedia Card Interface driver"); +MODULE_AUTHOR("NXP Semiconductor VietNam"); +MODULE_AUTHOR("Imagination Technologies Ltd"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 8bec1c3..bf3c9b4 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -268,7 +268,7 @@ static void dw_mci_start_command(struct dw_mci *host, struct mmc_command *cmd, u32 cmd_flags) { host->cmd = cmd; - dev_vdbg(&host->pdev->dev, + dev_vdbg(&host->dev, "start command: ARGR=0x%08x CMDR=0x%08x\n", cmd->arg, cmd_flags); @@ -295,15 +295,25 @@ static void dw_mci_stop_dma(struct dw_mci *host) } } +static int dw_mci_get_dma_dir(struct mmc_data *data) +{ + if (data->flags & MMC_DATA_WRITE) + return DMA_TO_DEVICE; + else + return DMA_FROM_DEVICE; +} + #ifdef CONFIG_MMC_DW_IDMAC static void dw_mci_dma_cleanup(struct dw_mci *host) { struct mmc_data *data = host->data; if (data) - dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len, - ((data->flags & MMC_DATA_WRITE) - ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); + if (!data->host_cookie) + dma_unmap_sg(&host->dev, + data->sg, + data->sg_len, + dw_mci_get_dma_dir(data)); } static void dw_mci_idmac_stop_dma(struct dw_mci *host) @@ -326,7 +336,7 @@ static void dw_mci_idmac_complete_dma(struct dw_mci *host) { struct mmc_data *data = host->data; - dev_vdbg(&host->pdev->dev, "DMA complete\n"); + dev_vdbg(&host->dev, "DMA complete\n"); host->dma_ops->cleanup(host); @@ -428,17 +438,15 @@ static struct dw_mci_dma_ops dw_mci_idmac_ops = { }; #endif /* CONFIG_MMC_DW_IDMAC */ -static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) +static int dw_mci_pre_dma_transfer(struct dw_mci *host, + struct mmc_data *data, + bool next) { struct scatterlist *sg; - unsigned int i, direction, sg_len; - u32 temp; + unsigned int i, sg_len; - host->using_dma = 0; - - /* If we don't have a channel, we can't do DMA */ - if (!host->use_dma) - return -ENODEV; + if (!next && data->host_cookie) + return data->host_cookie; /* * We don't do DMA on "complex" transfers, i.e. with @@ -447,6 +455,7 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) */ if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD) return -EINVAL; + if (data->blksz & 3) return -EINVAL; @@ -455,17 +464,74 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) return -EINVAL; } - host->using_dma = 1; + sg_len = dma_map_sg(&host->dev, + data->sg, + data->sg_len, + dw_mci_get_dma_dir(data)); + if (sg_len == 0) + return -EINVAL; - if (data->flags & MMC_DATA_READ) - direction = DMA_FROM_DEVICE; - else - direction = DMA_TO_DEVICE; + if (next) + data->host_cookie = sg_len; - sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, - direction); + return sg_len; +} - dev_vdbg(&host->pdev->dev, +static void dw_mci_pre_req(struct mmc_host *mmc, + struct mmc_request *mrq, + bool is_first_req) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!slot->host->use_dma || !data) + return; + + if (data->host_cookie) { + data->host_cookie = 0; + return; + } + + if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0) + data->host_cookie = 0; +} + +static void dw_mci_post_req(struct mmc_host *mmc, + struct mmc_request *mrq, + int err) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!slot->host->use_dma || !data) + return; + + if (data->host_cookie) + dma_unmap_sg(&slot->host->dev, + data->sg, + data->sg_len, + dw_mci_get_dma_dir(data)); + data->host_cookie = 0; +} + +static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) +{ + int sg_len; + u32 temp; + + host->using_dma = 0; + + /* If we don't have a channel, we can't do DMA */ + if (!host->use_dma) + return -ENODEV; + + sg_len = dw_mci_pre_dma_transfer(host, data, 0); + if (sg_len < 0) + return sg_len; + + host->using_dma = 1; + + dev_vdbg(&host->dev, "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma, sg_len); @@ -579,8 +645,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); /* enable clock */ - mci_writel(host, CLKENA, SDMMC_CLKEN_ENABLE | - SDMMC_CLKEN_LOW_PWR); + mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE | + SDMMC_CLKEN_LOW_PWR) << slot->id)); /* inform CIU */ mci_send_cmd(slot, @@ -800,6 +866,8 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) static const struct mmc_host_ops dw_mci_ops = { .request = dw_mci_request, + .pre_req = dw_mci_pre_req, + .post_req = dw_mci_post_req, .set_ios = dw_mci_set_ios, .get_ro = dw_mci_get_ro, .get_cd = dw_mci_get_cd, @@ -821,12 +889,12 @@ static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq) slot = list_entry(host->queue.next, struct dw_mci_slot, queue_node); list_del(&slot->queue_node); - dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", + dev_vdbg(&host->dev, "list not empty: %s is next\n", mmc_hostname(slot->mmc)); host->state = STATE_SENDING_CMD; dw_mci_start_request(host, slot); } else { - dev_vdbg(&host->pdev->dev, "list empty\n"); + dev_vdbg(&host->dev, "list empty\n"); host->state = STATE_IDLE; } @@ -965,7 +1033,7 @@ static void dw_mci_tasklet_func(unsigned long priv) data->bytes_xfered = 0; data->error = -ETIMEDOUT; } else { - dev_err(&host->pdev->dev, + dev_err(&host->dev, "data FIFO error " "(status=%08x)\n", status); @@ -1682,7 +1750,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) struct mmc_host *mmc; struct dw_mci_slot *slot; - mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->pdev->dev); + mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->dev); if (!mmc) return -ENOMEM; @@ -1720,13 +1788,11 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; -#ifdef CONFIG_MMC_DW_IDMAC - mmc->max_segs = host->ring_size; - mmc->max_blk_size = 65536; - mmc->max_blk_count = host->ring_size; - mmc->max_seg_size = 0x1000; - mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count; -#else + if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY) + mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT; + else + mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE; + if (host->pdata->blk_settings) { mmc->max_segs = host->pdata->blk_settings->max_segs; mmc->max_blk_size = host->pdata->blk_settings->max_blk_size; @@ -1735,13 +1801,20 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) mmc->max_seg_size = host->pdata->blk_settings->max_seg_size; } else { /* Useful defaults if platform data is unset. */ +#ifdef CONFIG_MMC_DW_IDMAC + mmc->max_segs = host->ring_size; + mmc->max_blk_size = 65536; + mmc->max_blk_count = host->ring_size; + mmc->max_seg_size = 0x1000; + mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count; +#else mmc->max_segs = 64; mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */ mmc->max_blk_count = 512; mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; - } #endif /* CONFIG_MMC_DW_IDMAC */ + } host->vmmc = regulator_get(mmc_dev(mmc), "vmmc"); if (IS_ERR(host->vmmc)) { @@ -1789,10 +1862,10 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) static void dw_mci_init_dma(struct dw_mci *host) { /* Alloc memory for sg translation */ - host->sg_cpu = dma_alloc_coherent(&host->pdev->dev, PAGE_SIZE, + host->sg_cpu = dma_alloc_coherent(&host->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL); if (!host->sg_cpu) { - dev_err(&host->pdev->dev, "%s: could not alloc DMA memory\n", + dev_err(&host->dev, "%s: could not alloc DMA memory\n", __func__); goto no_dma; } @@ -1800,7 +1873,7 @@ static void dw_mci_init_dma(struct dw_mci *host) /* Determine which DMA interface to use */ #ifdef CONFIG_MMC_DW_IDMAC host->dma_ops = &dw_mci_idmac_ops; - dev_info(&host->pdev->dev, "Using internal DMA controller.\n"); + dev_info(&host->dev, "Using internal DMA controller.\n"); #endif if (!host->dma_ops) @@ -1808,12 +1881,12 @@ static void dw_mci_init_dma(struct dw_mci *host) if (host->dma_ops->init) { if (host->dma_ops->init(host)) { - dev_err(&host->pdev->dev, "%s: Unable to initialize " + dev_err(&host->dev, "%s: Unable to initialize " "DMA Controller.\n", __func__); goto no_dma; } } else { - dev_err(&host->pdev->dev, "DMA initialization not found.\n"); + dev_err(&host->dev, "DMA initialization not found.\n"); goto no_dma; } @@ -1821,7 +1894,7 @@ static void dw_mci_init_dma(struct dw_mci *host) return; no_dma: - dev_info(&host->pdev->dev, "Using PIO mode.\n"); + dev_info(&host->dev, "Using PIO mode.\n"); host->use_dma = 0; return; } @@ -1847,61 +1920,37 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host) return false; } -static int dw_mci_probe(struct platform_device *pdev) +int dw_mci_probe(struct dw_mci *host) { - struct dw_mci *host; - struct resource *regs; - struct dw_mci_board *pdata; - int irq, ret, i, width; + int width, i, ret = 0; u32 fifo_size; - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) - return -ENXIO; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL); - if (!host) - return -ENOMEM; - - host->pdev = pdev; - host->pdata = pdata = pdev->dev.platform_data; - if (!pdata || !pdata->init) { - dev_err(&pdev->dev, + if (!host->pdata || !host->pdata->init) { + dev_err(&host->dev, "Platform data must supply init function\n"); - ret = -ENODEV; - goto err_freehost; + return -ENODEV; } - if (!pdata->select_slot && pdata->num_slots > 1) { - dev_err(&pdev->dev, + if (!host->pdata->select_slot && host->pdata->num_slots > 1) { + dev_err(&host->dev, "Platform data must supply select_slot function\n"); - ret = -ENODEV; - goto err_freehost; + return -ENODEV; } - if (!pdata->bus_hz) { - dev_err(&pdev->dev, + if (!host->pdata->bus_hz) { + dev_err(&host->dev, "Platform data must supply bus speed\n"); - ret = -ENODEV; - goto err_freehost; + return -ENODEV; } - host->bus_hz = pdata->bus_hz; - host->quirks = pdata->quirks; + host->bus_hz = host->pdata->bus_hz; + host->quirks = host->pdata->quirks; spin_lock_init(&host->lock); INIT_LIST_HEAD(&host->queue); - ret = -ENOMEM; - host->regs = ioremap(regs->start, resource_size(regs)); - if (!host->regs) - goto err_freehost; - host->dma_ops = pdata->dma_ops; + host->dma_ops = host->pdata->dma_ops; dw_mci_init_dma(host); /* @@ -1931,7 +1980,7 @@ static int dw_mci_probe(struct platform_device *pdev) } /* Reset all blocks */ - if (!mci_wait_reset(&pdev->dev, host)) { + if (!mci_wait_reset(&host->dev, host)) { ret = -ENODEV; goto err_dmaunmap; } @@ -1974,13 +2023,10 @@ static int dw_mci_probe(struct platform_device *pdev) if (!dw_mci_card_workqueue) goto err_dmaunmap; INIT_WORK(&host->card_work, dw_mci_work_routine_card); - - ret = request_irq(irq, dw_mci_interrupt, 0, "dw-mci", host); + ret = request_irq(host->irq, dw_mci_interrupt, host->irq_flags, "dw-mci", host); if (ret) goto err_workqueue; - platform_set_drvdata(pdev, host); - if (host->pdata->num_slots) host->num_slots = host->pdata->num_slots; else @@ -2000,7 +2046,7 @@ static int dw_mci_probe(struct platform_device *pdev) * Need to check the version-id and set data-offset for DATA register. */ host->verid = SDMMC_GET_VERID(mci_readl(host, VERID)); - dev_info(&pdev->dev, "Version ID is %04x\n", host->verid); + dev_info(&host->dev, "Version ID is %04x\n", host->verid); if (host->verid < DW_MMC_240A) host->data_offset = DATA_OFFSET; @@ -2017,12 +2063,12 @@ static int dw_mci_probe(struct platform_device *pdev) DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */ - dev_info(&pdev->dev, "DW MMC controller at irq %d, " + dev_info(&host->dev, "DW MMC controller at irq %d, " "%d bit host data width, " "%u deep fifo\n", - irq, width, fifo_size); + host->irq, width, fifo_size); if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) - dev_info(&pdev->dev, "Internal DMAC interrupt fix enabled.\n"); + dev_info(&host->dev, "Internal DMAC interrupt fix enabled.\n"); return 0; @@ -2033,7 +2079,7 @@ err_init_slot: dw_mci_cleanup_slot(host->slot[i], i); i--; } - free_irq(irq, host); + free_irq(host->irq, host); err_workqueue: destroy_workqueue(dw_mci_card_workqueue); @@ -2041,33 +2087,26 @@ err_workqueue: err_dmaunmap: if (host->use_dma && host->dma_ops->exit) host->dma_ops->exit(host); - dma_free_coherent(&host->pdev->dev, PAGE_SIZE, + dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); - iounmap(host->regs); if (host->vmmc) { regulator_disable(host->vmmc); regulator_put(host->vmmc); } - - -err_freehost: - kfree(host); return ret; } +EXPORT_SYMBOL(dw_mci_probe); -static int __exit dw_mci_remove(struct platform_device *pdev) +void dw_mci_remove(struct dw_mci *host) { - struct dw_mci *host = platform_get_drvdata(pdev); int i; mci_writel(host, RINTSTS, 0xFFFFFFFF); mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ - platform_set_drvdata(pdev, NULL); - for (i = 0; i < host->num_slots; i++) { - dev_dbg(&pdev->dev, "remove slot %d\n", i); + dev_dbg(&host->dev, "remove slot %d\n", i); if (host->slot[i]) dw_mci_cleanup_slot(host->slot[i], i); } @@ -2076,9 +2115,9 @@ static int __exit dw_mci_remove(struct platform_device *pdev) mci_writel(host, CLKENA, 0); mci_writel(host, CLKSRC, 0); - free_irq(platform_get_irq(pdev, 0), host); + free_irq(host->irq, host); destroy_workqueue(dw_mci_card_workqueue); - dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); + dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); if (host->use_dma && host->dma_ops->exit) host->dma_ops->exit(host); @@ -2088,20 +2127,18 @@ static int __exit dw_mci_remove(struct platform_device *pdev) regulator_put(host->vmmc); } - iounmap(host->regs); - - kfree(host); - return 0; } +EXPORT_SYMBOL(dw_mci_remove); + + #ifdef CONFIG_PM_SLEEP /* * TODO: we should probably disable the clock to the card in the suspend path. */ -static int dw_mci_suspend(struct device *dev) +int dw_mci_suspend(struct dw_mci *host) { - int i, ret; - struct dw_mci *host = dev_get_drvdata(dev); + int i, ret = 0; for (i = 0; i < host->num_slots; i++) { struct dw_mci_slot *slot = host->slot[i]; @@ -2123,11 +2160,11 @@ static int dw_mci_suspend(struct device *dev) return 0; } +EXPORT_SYMBOL(dw_mci_suspend); -static int dw_mci_resume(struct device *dev) +int dw_mci_resume(struct dw_mci *host) { int i, ret; - struct dw_mci *host = dev_get_drvdata(dev); if (host->vmmc) regulator_enable(host->vmmc); @@ -2135,7 +2172,7 @@ static int dw_mci_resume(struct device *dev) if (host->dma_ops->init) host->dma_ops->init(host); - if (!mci_wait_reset(dev, host)) { + if (!mci_wait_reset(&host->dev, host)) { ret = -ENODEV; return ret; } @@ -2157,32 +2194,19 @@ static int dw_mci_resume(struct device *dev) if (ret < 0) return ret; } - return 0; } -#else -#define dw_mci_suspend NULL -#define dw_mci_resume NULL +EXPORT_SYMBOL(dw_mci_resume); #endif /* CONFIG_PM_SLEEP */ -static SIMPLE_DEV_PM_OPS(dw_mci_pmops, dw_mci_suspend, dw_mci_resume); - -static struct platform_driver dw_mci_driver = { - .remove = __exit_p(dw_mci_remove), - .driver = { - .name = "dw_mmc", - .pm = &dw_mci_pmops, - }, -}; - static int __init dw_mci_init(void) { - return platform_driver_probe(&dw_mci_driver, dw_mci_probe); + printk(KERN_INFO "Synopsys Designware Multimedia Card Interface Driver"); + return 0; } static void __exit dw_mci_exit(void) { - platform_driver_unregister(&dw_mci_driver); } module_init(dw_mci_init); diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index df392a1..15c27e1 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -175,4 +175,11 @@ (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value)) #endif +extern int dw_mci_probe(struct dw_mci *host); +extern void dw_mci_remove(struct dw_mci *host); +#ifdef CONFIG_PM +extern int dw_mci_suspend(struct dw_mci *host); +extern int dw_mci_resume(struct dw_mci *host); +#endif + #endif /* _DW_MMC_H_ */ diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 983e244..032b847 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -30,6 +30,7 @@ #include <linux/dma-mapping.h> #include <linux/amba/mmci.h> #include <linux/pm_runtime.h> +#include <linux/types.h> #include <asm/div64.h> #include <asm/io.h> @@ -400,6 +401,7 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data, .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, .src_maxburst = variant->fifohalfsize >> 2, /* # of words */ .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .device_fc = false, }; struct dma_chan *chan; struct dma_device *device; @@ -441,7 +443,7 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data, return -EINVAL; dmaengine_slave_config(chan, &conf); - desc = device->device_prep_slave_sg(chan, data->sg, nr_sg, + desc = dmaengine_prep_slave_sg(chan, data->sg, nr_sg, conf.direction, DMA_CTRL_ACK); if (!desc) goto unmap_exit; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 4184b79..b2058b4 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -33,6 +33,7 @@ #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/dmaengine.h> +#include <linux/types.h> #include <asm/dma.h> #include <asm/irq.h> @@ -254,7 +255,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) if (nents != data->sg_len) return -EINVAL; - host->desc = host->dma->device->device_prep_slave_sg(host->dma, + host->desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len, slave_dirn, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -267,6 +268,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) wmb(); dmaengine_submit(host->desc); + dma_async_issue_pending(host->dma); return 0; } @@ -710,6 +712,7 @@ static int mxcmci_setup_dma(struct mmc_host *mmc) config->src_addr_width = 4; config->dst_maxburst = host->burstlen; config->src_maxburst = host->burstlen; + config->device_fc = false; return dmaengine_slave_config(host->dma, config); } diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 382c835..b0f2ef9 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -38,10 +38,10 @@ #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/module.h> +#include <linux/fsl/mxs-dma.h> #include <mach/mxs.h> #include <mach/common.h> -#include <mach/dma.h> #include <mach/mmc.h> #define DRIVER_NAME "mxs-mmc" @@ -305,7 +305,7 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id) } static struct dma_async_tx_descriptor *mxs_mmc_prep_dma( - struct mxs_mmc_host *host, unsigned int append) + struct mxs_mmc_host *host, unsigned long flags) { struct dma_async_tx_descriptor *desc; struct mmc_data *data = host->data; @@ -324,8 +324,8 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma( sg_len = SSP_PIO_NUM; } - desc = host->dmach->device->device_prep_slave_sg(host->dmach, - sgl, sg_len, host->slave_dirn, append); + desc = dmaengine_prep_slave_sg(host->dmach, + sgl, sg_len, host->slave_dirn, flags); if (desc) { desc->callback = mxs_mmc_dma_irq_callback; desc->callback_param = host; @@ -358,7 +358,7 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host) host->ssp_pio_words[2] = cmd1; host->dma_dir = DMA_NONE; host->slave_dirn = DMA_TRANS_NONE; - desc = mxs_mmc_prep_dma(host, 0); + desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK); if (!desc) goto out; @@ -398,7 +398,7 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host) host->ssp_pio_words[2] = cmd1; host->dma_dir = DMA_NONE; host->slave_dirn = DMA_TRANS_NONE; - desc = mxs_mmc_prep_dma(host, 0); + desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK); if (!desc) goto out; @@ -526,7 +526,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host) host->data = data; host->dma_dir = dma_data_dir; host->slave_dirn = slave_dirn; - desc = mxs_mmc_prep_dma(host, 1); + desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) goto out; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index fd0c661..47adb16 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -26,6 +26,9 @@ #include <linux/platform_device.h> #include <linux/timer.h> #include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/of_device.h> #include <linux/mmc/host.h> #include <linux/mmc/core.h> #include <linux/mmc/mmc.h> @@ -106,17 +109,6 @@ #define SOFTRESET (1 << 1) #define RESETDONE (1 << 0) -/* - * FIXME: Most likely all the data using these _DEVID defines should come - * from the platform_data, or implemented in controller and slot specific - * functions. - */ -#define OMAP_MMC1_DEVID 0 -#define OMAP_MMC2_DEVID 1 -#define OMAP_MMC3_DEVID 2 -#define OMAP_MMC4_DEVID 3 -#define OMAP_MMC5_DEVID 4 - #define MMC_AUTOSUSPEND_DELAY 100 #define MMC_TIMEOUT_MS 20 #define OMAP_MMC_MIN_CLOCK 400000 @@ -164,7 +156,6 @@ struct omap_hsmmc_host { void __iomem *base; resource_size_t mapbase; spinlock_t irq_lock; /* Prevent races with irq handler */ - unsigned int id; unsigned int dma_len; unsigned int dma_sg_idx; unsigned char bus_mode; @@ -179,7 +170,6 @@ struct omap_hsmmc_host { int got_dbclk; int response_busy; int context_loss; - int dpm_state; int vdd; int protect_card; int reqs_blocked; @@ -241,28 +231,7 @@ static int omap_hsmmc_resume_cdirq(struct device *dev, int slot) #ifdef CONFIG_REGULATOR -static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - struct omap_hsmmc_host *host = - platform_get_drvdata(to_platform_device(dev)); - int ret; - - if (mmc_slot(host).before_set_reg) - mmc_slot(host).before_set_reg(dev, slot, power_on, vdd); - - if (power_on) - ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); - else - ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); - - if (mmc_slot(host).after_set_reg) - mmc_slot(host).after_set_reg(dev, slot, power_on, vdd); - - return ret; -} - -static int omap_hsmmc_235_set_power(struct device *dev, int slot, int power_on, +static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, int vdd) { struct omap_hsmmc_host *host = @@ -275,6 +244,13 @@ static int omap_hsmmc_235_set_power(struct device *dev, int slot, int power_on, */ if (!host->vcc) return 0; + /* + * With DT, never turn OFF the regulator. This is because + * the pbias cell programming support is still missing when + * booting with Device tree + */ + if (of_have_populated_dt() && !vdd) + return 0; if (mmc_slot(host).before_set_reg) mmc_slot(host).before_set_reg(dev, slot, power_on, vdd); @@ -318,106 +294,16 @@ static int omap_hsmmc_235_set_power(struct device *dev, int slot, int power_on, return ret; } -static int omap_hsmmc_4_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - return 0; -} - -static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep, - int vdd, int cardsleep) -{ - struct omap_hsmmc_host *host = - platform_get_drvdata(to_platform_device(dev)); - int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; - - return regulator_set_mode(host->vcc, mode); -} - -static int omap_hsmmc_235_set_sleep(struct device *dev, int slot, int sleep, - int vdd, int cardsleep) -{ - struct omap_hsmmc_host *host = - platform_get_drvdata(to_platform_device(dev)); - int err, mode; - - /* - * If we don't see a Vcc regulator, assume it's a fixed - * voltage always-on regulator. - */ - if (!host->vcc) - return 0; - - mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; - - if (!host->vcc_aux) - return regulator_set_mode(host->vcc, mode); - - if (cardsleep) { - /* VCC can be turned off if card is asleep */ - if (sleep) - err = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); - else - err = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); - } else - err = regulator_set_mode(host->vcc, mode); - if (err) - return err; - - if (!mmc_slot(host).vcc_aux_disable_is_sleep) - return regulator_set_mode(host->vcc_aux, mode); - - if (sleep) - return regulator_disable(host->vcc_aux); - else - return regulator_enable(host->vcc_aux); -} - -static int omap_hsmmc_4_set_sleep(struct device *dev, int slot, int sleep, - int vdd, int cardsleep) -{ - return 0; -} - static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) { struct regulator *reg; - int ret = 0; int ocr_value = 0; - switch (host->id) { - case OMAP_MMC1_DEVID: - /* On-chip level shifting via PBIAS0/PBIAS1 */ - mmc_slot(host).set_power = omap_hsmmc_1_set_power; - mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep; - break; - case OMAP_MMC2_DEVID: - case OMAP_MMC3_DEVID: - case OMAP_MMC5_DEVID: - /* Off-chip level shifting, or none */ - mmc_slot(host).set_power = omap_hsmmc_235_set_power; - mmc_slot(host).set_sleep = omap_hsmmc_235_set_sleep; - break; - case OMAP_MMC4_DEVID: - mmc_slot(host).set_power = omap_hsmmc_4_set_power; - mmc_slot(host).set_sleep = omap_hsmmc_4_set_sleep; - default: - pr_err("MMC%d configuration not supported!\n", host->id); - return -EINVAL; - } + mmc_slot(host).set_power = omap_hsmmc_set_power; reg = regulator_get(host->dev, "vmmc"); if (IS_ERR(reg)) { dev_dbg(host->dev, "vmmc regulator missing\n"); - /* - * HACK: until fixed.c regulator is usable, - * we don't require a main regulator - * for MMC2 or MMC3 - */ - if (host->id == OMAP_MMC1_DEVID) { - ret = PTR_ERR(reg); - goto err; - } } else { host->vcc = reg; ocr_value = mmc_regulator_get_ocrmask(reg); @@ -425,8 +311,8 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) mmc_slot(host).ocr_mask = ocr_value; } else { if (!(mmc_slot(host).ocr_mask & ocr_value)) { - pr_err("MMC%d ocrmask %x is not supported\n", - host->id, mmc_slot(host).ocr_mask); + dev_err(host->dev, "ocrmask %x is not supported\n", + mmc_slot(host).ocr_mask); mmc_slot(host).ocr_mask = 0; return -EINVAL; } @@ -459,11 +345,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) } return 0; - -err: - mmc_slot(host).set_power = NULL; - mmc_slot(host).set_sleep = NULL; - return ret; } static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host) @@ -471,7 +352,6 @@ static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host) regulator_put(host->vcc); regulator_put(host->vcc_aux); mmc_slot(host).set_power = NULL; - mmc_slot(host).set_sleep = NULL; } static inline int omap_hsmmc_have_reg(void) @@ -710,7 +590,7 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) OMAP_HSMMC_WRITE(host->base, SYSCONFIG, OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); - if (host->id == OMAP_MMC1_DEVID) { + if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { if (host->power_mode != MMC_POWER_OFF && (1 << ios->vdd) <= MMC_VDD_23_24) hctl = SDVS18; @@ -1261,14 +1141,14 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host) host->reqs_blocked = 0; if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) { if (host->protect_card) { - pr_info("%s: cover is closed, " + dev_info(host->dev, "%s: cover is closed, " "card is now accessible\n", mmc_hostname(host->mmc)); host->protect_card = 0; } } else { if (!host->protect_card) { - pr_info("%s: cover is open, " + dev_info(host->dev, "%s: cover is open, " "card is now inaccessible\n", mmc_hostname(host->mmc)); host->protect_card = 1; @@ -1405,7 +1285,7 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host, if (!next && data->host_cookie && data->host_cookie != host->next_data.cookie) { - pr_warning("[%s] invalid cookie: data->host_cookie %d" + dev_warn(host->dev, "[%s] invalid cookie: data->host_cookie %d" " host->next_data.cookie %d\n", __func__, data->host_cookie, host->next_data.cookie); data->host_cookie = 0; @@ -1663,7 +1543,13 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * of external transceiver; but they all handle 1.8V. */ if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && - (ios->vdd == DUAL_VOLT_OCR_BIT)) { + (ios->vdd == DUAL_VOLT_OCR_BIT) && + /* + * With pbias cell programming missing, this + * can't be allowed when booting with device + * tree. + */ + (!of_have_populated_dt())) { /* * The mmc_select_voltage fn of the core does * not seem to set the power_mode to @@ -1748,7 +1634,7 @@ static int omap_hsmmc_enable_fclk(struct mmc_host *mmc) return 0; } -static int omap_hsmmc_disable_fclk(struct mmc_host *mmc, int lazy) +static int omap_hsmmc_disable_fclk(struct mmc_host *mmc) { struct omap_hsmmc_host *host = mmc_priv(mmc); @@ -1782,15 +1668,8 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data) if (host->pdata->get_context_loss_count) context_loss = host->pdata->get_context_loss_count(host->dev); - seq_printf(s, "mmc%d:\n" - " enabled:\t%d\n" - " dpm_state:\t%d\n" - " nesting_cnt:\t%d\n" - " ctx_loss:\t%d:%d\n" - "\nregs:\n", - mmc->index, mmc->enabled ? 1 : 0, - host->dpm_state, mmc->nesting_cnt, - host->context_loss, context_loss); + seq_printf(s, "mmc%d:\n ctx_loss:\t%d:%d\n\nregs:\n", + mmc->index, host->context_loss, context_loss); if (host->suspended) { seq_printf(s, "host suspended, can't read registers\n"); @@ -1847,6 +1726,65 @@ static void omap_hsmmc_debugfs(struct mmc_host *mmc) #endif +#ifdef CONFIG_OF +static u16 omap4_reg_offset = 0x100; + +static const struct of_device_id omap_mmc_of_match[] = { + { + .compatible = "ti,omap2-hsmmc", + }, + { + .compatible = "ti,omap3-hsmmc", + }, + { + .compatible = "ti,omap4-hsmmc", + .data = &omap4_reg_offset, + }, + {}, +} +MODULE_DEVICE_TABLE(of, omap_mmc_of_match); + +static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev) +{ + struct omap_mmc_platform_data *pdata; + struct device_node *np = dev->of_node; + u32 bus_width; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; /* out of memory */ + + if (of_find_property(np, "ti,dual-volt", NULL)) + pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT; + + /* This driver only supports 1 slot */ + pdata->nr_slots = 1; + pdata->slots[0].switch_pin = of_get_named_gpio(np, "cd-gpios", 0); + pdata->slots[0].gpio_wp = of_get_named_gpio(np, "wp-gpios", 0); + + if (of_find_property(np, "ti,non-removable", NULL)) { + pdata->slots[0].nonremovable = true; + pdata->slots[0].no_regulator_off_init = true; + } + of_property_read_u32(np, "ti,bus-width", &bus_width); + if (bus_width == 4) + pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA; + else if (bus_width == 8) + pdata->slots[0].caps |= MMC_CAP_8_BIT_DATA; + + if (of_find_property(np, "ti,needs-special-reset", NULL)) + pdata->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + + return pdata; +} +#else +static inline struct omap_mmc_platform_data + *of_get_hsmmc_pdata(struct device *dev) +{ + return NULL; +} +#endif + static int __init omap_hsmmc_probe(struct platform_device *pdev) { struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; @@ -1854,6 +1792,16 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) struct omap_hsmmc_host *host = NULL; struct resource *res; int ret, irq; + const struct of_device_id *match; + + match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev); + if (match) { + pdata = of_get_hsmmc_pdata(&pdev->dev); + if (match->data) { + u16 *offsetp = match->data; + pdata->reg_offset = *offsetp; + } + } if (pdata == NULL) { dev_err(&pdev->dev, "Platform Data is missing\n"); @@ -1894,7 +1842,6 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) host->dev->dma_mask = &pdata->dma_mask; host->dma_ch = -1; host->irq = irq; - host->id = pdev->id; host->slot_id = 0; host->mapbase = res->start; host->base = ioremap(host->mapbase, SZ_4K); @@ -1912,8 +1859,12 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) if (mmc_slot(host).vcc_aux_disable_is_sleep) mmc_slot(host).no_off = 1; - mmc->f_min = OMAP_MMC_MIN_CLOCK; - mmc->f_max = OMAP_MMC_MAX_CLOCK; + mmc->f_min = OMAP_MMC_MIN_CLOCK; + + if (pdata->max_freq > 0) + mmc->f_max = pdata->max_freq; + else + mmc->f_max = OMAP_MMC_MAX_CLOCK; spin_lock_init(&host->irq_lock); @@ -1926,7 +1877,6 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_context_save(host); - mmc->caps |= MMC_CAP_DISABLE; if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) { dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n"); mmc->caps2 |= MMC_CAP2_NO_MULTI_READ; @@ -1977,32 +1927,19 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_conf_bus_power(host); - /* Select DMA lines */ - switch (host->id) { - case OMAP_MMC1_DEVID: - host->dma_line_tx = OMAP24XX_DMA_MMC1_TX; - host->dma_line_rx = OMAP24XX_DMA_MMC1_RX; - break; - case OMAP_MMC2_DEVID: - host->dma_line_tx = OMAP24XX_DMA_MMC2_TX; - host->dma_line_rx = OMAP24XX_DMA_MMC2_RX; - break; - case OMAP_MMC3_DEVID: - host->dma_line_tx = OMAP34XX_DMA_MMC3_TX; - host->dma_line_rx = OMAP34XX_DMA_MMC3_RX; - break; - case OMAP_MMC4_DEVID: - host->dma_line_tx = OMAP44XX_DMA_MMC4_TX; - host->dma_line_rx = OMAP44XX_DMA_MMC4_RX; - break; - case OMAP_MMC5_DEVID: - host->dma_line_tx = OMAP44XX_DMA_MMC5_TX; - host->dma_line_rx = OMAP44XX_DMA_MMC5_RX; - break; - default: - dev_err(mmc_dev(host->mmc), "Invalid MMC id\n"); + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n"); + goto err_irq; + } + host->dma_line_tx = res->start; + + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n"); goto err_irq; } + host->dma_line_rx = res->start; /* Request IRQ for MMC operations */ ret = request_irq(host->irq, omap_hsmmc_irq, 0, @@ -2083,6 +2020,7 @@ err_irq_cd_init: err_irq: pm_runtime_mark_last_busy(host->dev); pm_runtime_put_autosuspend(host->dev); + pm_runtime_disable(host->dev); clk_put(host->fclk); if (host->got_dbclk) { clk_disable(host->dbclk); @@ -2269,6 +2207,7 @@ static struct platform_driver omap_hsmmc_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, .pm = &omap_hsmmc_dev_pm_ops, + .of_match_table = of_match_ptr(omap_mmc_of_match), }, }; diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 5d876ff..f8eb1fb 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -1,7 +1,7 @@ /* * Freescale eSDHC controller driver. * - * Copyright (c) 2007, 2010 Freescale Semiconductor, Inc. + * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc. * Copyright (c) 2009 MontaVista Software, Inc. * * Authors: Xiaobo Xie <X.Xie@freescale.com> @@ -14,6 +14,7 @@ */ #include <linux/io.h> +#include <linux/of.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/mmc/host.h> @@ -114,6 +115,34 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host) return pltfm_host->clock / 256 / 16; } +static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) +{ + /* Workaround to reduce the clock frequency for p1010 esdhc */ + if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) { + if (clock > 20000000) + clock -= 5000000; + if (clock > 40000000) + clock -= 5000000; + } + + /* Set the clock */ + esdhc_set_clock(host, clock); +} + +#ifdef CONFIG_PM +static u32 esdhc_proctl; +static void esdhc_of_suspend(struct sdhci_host *host) +{ + esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL); +} + +static void esdhc_of_resume(struct sdhci_host *host) +{ + esdhc_of_enable_dma(host); + sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL); +} +#endif + static struct sdhci_ops sdhci_esdhc_ops = { .read_l = sdhci_be32bs_readl, .read_w = esdhc_readw, @@ -121,10 +150,14 @@ static struct sdhci_ops sdhci_esdhc_ops = { .write_l = sdhci_be32bs_writel, .write_w = esdhc_writew, .write_b = esdhc_writeb, - .set_clock = esdhc_set_clock, + .set_clock = esdhc_of_set_clock, .enable_dma = esdhc_of_enable_dma, .get_max_clock = esdhc_of_get_max_clock, .get_min_clock = esdhc_of_get_min_clock, +#ifdef CONFIG_PM + .platform_suspend = esdhc_of_suspend, + .platform_resume = esdhc_of_resume, +#endif }; static struct sdhci_pltfm_data sdhci_esdhc_pdata = { diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 6ebdc40..fbbebe2 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -29,6 +29,12 @@ #include "sdhci.h" /* + * PCI device IDs + */ +#define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809 +#define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a + +/* * PCI registers */ @@ -47,6 +53,7 @@ struct sdhci_pci_slot; struct sdhci_pci_fixes { unsigned int quirks; + unsigned int quirks2; bool allow_runtime_pm; int (*probe) (struct sdhci_pci_chip *); @@ -73,6 +80,7 @@ struct sdhci_pci_chip { struct pci_dev *pdev; unsigned int quirks; + unsigned int quirks2; bool allow_runtime_pm; const struct sdhci_pci_fixes *fixes; @@ -172,6 +180,12 @@ static int mrst_hc_probe(struct sdhci_pci_chip *chip) return 0; } +static int pch_hc_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA; + return 0; +} + #ifdef CONFIG_PM_RUNTIME static irqreturn_t sdhci_pci_sd_cd(int irq, void *dev_id) @@ -244,7 +258,8 @@ static inline void sdhci_pci_remove_own_cd(struct sdhci_pci_slot *slot) static int mfd_emmc_probe_slot(struct sdhci_pci_slot *slot) { slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE; - slot->host->mmc->caps2 = MMC_CAP2_BOOTPART_NOACC; + slot->host->mmc->caps2 |= MMC_CAP2_BOOTPART_NOACC | + MMC_CAP2_HC_ERASE_SZ; return 0; } @@ -271,6 +286,7 @@ static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = { static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = { .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, .allow_runtime_pm = true, .probe_slot = mfd_sdio_probe_slot, }; @@ -281,6 +297,11 @@ static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc = { .probe_slot = mfd_emmc_probe_slot, }; +static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = { + .quirks = SDHCI_QUIRK_BROKEN_ADMA, + .probe_slot = pch_hc_probe_slot, +}; + /* O2Micro extra registers */ #define O2_SD_LOCK_WP 0xD3 #define O2_SD_MULTI_VCC3V 0xEE @@ -817,6 +838,22 @@ static const struct pci_device_id pci_ids[] __devinitdata = { }, { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PCH_SDIO0, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_pch_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PCH_SDIO1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_pch_sdio, + }, + + { .vendor = PCI_VENDOR_ID_O2, .device = PCI_DEVICE_ID_O2_8120, .subvendor = PCI_ANY_ID, @@ -1206,6 +1243,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( host->hw_name = "PCI"; host->ops = &sdhci_pci_ops; host->quirks = chip->quirks; + host->quirks2 = chip->quirks2; host->irq = pdev->irq; @@ -1365,6 +1403,7 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, chip->fixes = (const struct sdhci_pci_fixes *)ent->driver_data; if (chip->fixes) { chip->quirks = chip->fixes->quirks; + chip->quirks2 = chip->fixes->quirks2; chip->allow_runtime_pm = chip->fixes->allow_runtime_pm; } chip->num_slots = slots; @@ -1379,6 +1418,8 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, slots = chip->num_slots; /* Quirk may have changed this */ + pci_enable_msi(pdev); + for (i = 0; i < slots; i++) { slot = sdhci_pci_probe_slot(pdev, chip, first_bar, i); if (IS_ERR(slot)) { @@ -1397,6 +1438,8 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, return 0; free: + pci_disable_msi(pdev); + pci_set_drvdata(pdev, NULL); kfree(chip); @@ -1419,6 +1462,8 @@ static void __devexit sdhci_pci_remove(struct pci_dev *pdev) for (i = 0; i < chip->num_slots; i++) sdhci_pci_remove_slot(chip->slots[i]); + pci_disable_msi(pdev); + pci_set_drvdata(pdev, NULL); kfree(chip); } diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index b7f8b33..6dfa82e 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -300,20 +300,15 @@ static int sdhci_resume(struct device *dev) return sdhci_resume_host(host); } - -const struct dev_pm_ops sdhci_pm_ops = { - .suspend = sdhci_suspend, - .resume = sdhci_resume, -}; #endif +static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume); + static struct platform_driver sdhci_driver = { .driver = { .name = "sdhci", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &sdhci_pm_ops, -#endif }, .probe = sdhci_probe, .remove = __devexit_p(sdhci_remove), diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index cb34856..53b2650 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/gpio.h> #include <linux/mmc/card.h> @@ -31,6 +32,19 @@ #include "sdhci-pltfm.h" +#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0) +#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1) + +struct sdhci_tegra_soc_data { + struct sdhci_pltfm_data *pdata; + u32 nvquirks; +}; + +struct sdhci_tegra { + const struct tegra_sdhci_platform_data *plat; + const struct sdhci_tegra_soc_data *soc_data; +}; + static u32 tegra_sdhci_readl(struct sdhci_host *host, int reg) { u32 val; @@ -46,7 +60,12 @@ static u32 tegra_sdhci_readl(struct sdhci_host *host, int reg) static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) { - if (unlikely(reg == SDHCI_HOST_VERSION)) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + + if (unlikely((soc_data->nvquirks & NVQUIRK_FORCE_SDHCI_SPEC_200) && + (reg == SDHCI_HOST_VERSION))) { /* Erratum: Version register is invalid in HW. */ return SDHCI_SPEC_200; } @@ -56,6 +75,10 @@ static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; + /* Seems like we're getting spurious timeout and crc errors, so * disable signalling of them. In case of real errors software * timers should take care of eventually detecting them. @@ -65,7 +88,8 @@ static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg) writel(val, host->ioaddr + reg); - if (unlikely(reg == SDHCI_INT_ENABLE)) { + if (unlikely((soc_data->nvquirks & NVQUIRK_ENABLE_BLOCK_GAP_DET) && + (reg == SDHCI_INT_ENABLE))) { /* Erratum: Must enable block gap interrupt detection */ u8 gap_ctrl = readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL); if (val & SDHCI_INT_CARD_INT) @@ -76,10 +100,11 @@ static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg) } } -static unsigned int tegra_sdhci_get_ro(struct sdhci_host *sdhci) +static unsigned int tegra_sdhci_get_ro(struct sdhci_host *host) { - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(sdhci); - struct tegra_sdhci_platform_data *plat = pltfm_host->priv; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct tegra_sdhci_platform_data *plat = tegra_host->plat; if (!gpio_is_valid(plat->wp_gpio)) return -1; @@ -98,7 +123,8 @@ static irqreturn_t carddetect_irq(int irq, void *data) static int tegra_sdhci_8bit(struct sdhci_host *host, int bus_width) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct tegra_sdhci_platform_data *plat = pltfm_host->priv; + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct tegra_sdhci_platform_data *plat = tegra_host->plat; u32 ctrl; ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); @@ -124,16 +150,44 @@ static struct sdhci_ops tegra_sdhci_ops = { .platform_8bit_width = tegra_sdhci_8bit, }; -static struct sdhci_pltfm_data sdhci_tegra_pdata = { +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +static struct sdhci_pltfm_data sdhci_tegra20_pdata = { + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_NO_HISPD_BIT | + SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC, + .ops = &tegra_sdhci_ops, +}; + +static struct sdhci_tegra_soc_data soc_data_tegra20 = { + .pdata = &sdhci_tegra20_pdata, + .nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 | + NVQUIRK_ENABLE_BLOCK_GAP_DET, +}; +#endif + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +static struct sdhci_pltfm_data sdhci_tegra30_pdata = { .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | SDHCI_QUIRK_SINGLE_POWER_WRITE | SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC, .ops = &tegra_sdhci_ops, }; +static struct sdhci_tegra_soc_data soc_data_tegra30 = { + .pdata = &sdhci_tegra30_pdata, +}; +#endif + static const struct of_device_id sdhci_tegra_dt_match[] __devinitdata = { - { .compatible = "nvidia,tegra20-sdhci", }, +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + { .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 }, +#endif +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + { .compatible = "nvidia,tegra20-sdhci", .data = &soc_data_tegra20 }, +#endif {} }; MODULE_DEVICE_TABLE(of, sdhci_dt_ids); @@ -164,13 +218,22 @@ static struct tegra_sdhci_platform_data * __devinit sdhci_tegra_dt_parse_pdata( static int __devinit sdhci_tegra_probe(struct platform_device *pdev) { + const struct of_device_id *match; + const struct sdhci_tegra_soc_data *soc_data; + struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct tegra_sdhci_platform_data *plat; - struct sdhci_host *host; + struct sdhci_tegra *tegra_host; struct clk *clk; int rc; - host = sdhci_pltfm_init(pdev, &sdhci_tegra_pdata); + match = of_match_device(sdhci_tegra_dt_match, &pdev->dev); + if (match) + soc_data = match->data; + else + soc_data = &soc_data_tegra20; + + host = sdhci_pltfm_init(pdev, soc_data->pdata); if (IS_ERR(host)) return PTR_ERR(host); @@ -187,7 +250,17 @@ static int __devinit sdhci_tegra_probe(struct platform_device *pdev) goto err_no_plat; } - pltfm_host->priv = plat; + tegra_host = devm_kzalloc(&pdev->dev, sizeof(*tegra_host), GFP_KERNEL); + if (!tegra_host) { + dev_err(mmc_dev(host->mmc), "failed to allocate tegra_host\n"); + rc = -ENOMEM; + goto err_no_plat; + } + + tegra_host->plat = plat; + tegra_host->soc_data = soc_data; + + pltfm_host->priv = tegra_host; if (gpio_is_valid(plat->power_gpio)) { rc = gpio_request(plat->power_gpio, "sdhci_power"); @@ -283,7 +356,8 @@ static int __devexit sdhci_tegra_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct tegra_sdhci_platform_data *plat = pltfm_host->priv; + struct sdhci_tegra *tegra_host = pltfm_host->priv; + const struct tegra_sdhci_platform_data *plat = tegra_host->plat; int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); sdhci_remove_host(host, dead); @@ -326,5 +400,5 @@ static struct platform_driver sdhci_tegra_driver = { module_platform_driver(sdhci_tegra_driver); MODULE_DESCRIPTION("SDHCI driver for Tegra"); -MODULE_AUTHOR(" Google, Inc."); +MODULE_AUTHOR("Google, Inc."); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 8d66706..8262cad 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2267,8 +2267,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id) { irqreturn_t result; struct sdhci_host *host = dev_id; - u32 intmask; - int cardint = 0; + u32 intmask, unexpected = 0; + int cardint = 0, max_loops = 16; spin_lock(&host->lock); @@ -2286,6 +2286,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id) goto out; } +again: DBG("*** %s got interrupt: 0x%08x\n", mmc_hostname(host->mmc), intmask); @@ -2344,19 +2345,23 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id) intmask &= ~SDHCI_INT_CARD_INT; if (intmask) { - pr_err("%s: Unexpected interrupt 0x%08x.\n", - mmc_hostname(host->mmc), intmask); - sdhci_dumpregs(host); - + unexpected |= intmask; sdhci_writel(host, intmask, SDHCI_INT_STATUS); } result = IRQ_HANDLED; - mmiowb(); + intmask = sdhci_readl(host, SDHCI_INT_STATUS); + if (intmask && --max_loops) + goto again; out: spin_unlock(&host->lock); + if (unexpected) { + pr_err("%s: Unexpected interrupt 0x%08x.\n", + mmc_hostname(host->mmc), unexpected); + sdhci_dumpregs(host); + } /* * We have to delay this as it calls back into the driver. */ @@ -2379,6 +2384,9 @@ int sdhci_suspend_host(struct sdhci_host *host) int ret; bool has_tuning_timer; + if (host->ops->platform_suspend) + host->ops->platform_suspend(host); + sdhci_disable_card_detection(host); /* Disable tuning since we are suspending */ @@ -2423,12 +2431,24 @@ int sdhci_resume_host(struct sdhci_host *host) if (ret) return ret; - sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); - mmiowb(); + if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) && + (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) { + /* Card keeps power but host controller does not */ + sdhci_init(host, 0); + host->pwr = 0; + host->clock = 0; + sdhci_do_set_ios(host, &host->mmc->ios); + } else { + sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); + mmiowb(); + } ret = mmc_resume_host(host->mmc); sdhci_enable_card_detection(host); + if (host->ops->platform_resume) + host->ops->platform_resume(host); + /* Set the re-tuning expiration flag */ if ((host->version >= SDHCI_SPEC_300) && host->tuning_count && (host->tuning_mode == SDHCI_TUNING_MODE_1)) diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index ad265b9..f761f23 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -275,6 +275,8 @@ struct sdhci_ops { void (*platform_reset_exit)(struct sdhci_host *host, u8 mask); int (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); void (*hw_reset)(struct sdhci_host *host); + void (*platform_suspend)(struct sdhci_host *host); + void (*platform_resume)(struct sdhci_host *host); }; #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 75a4854..aafaf0b 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -286,7 +286,7 @@ static void sh_mmcif_start_dma_rx(struct sh_mmcif_host *host) DMA_FROM_DEVICE); if (ret > 0) { host->dma_active = true; - desc = chan->device->device_prep_slave_sg(chan, sg, ret, + desc = dmaengine_prep_slave_sg(chan, sg, ret, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); } @@ -335,7 +335,7 @@ static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host) DMA_TO_DEVICE); if (ret > 0) { host->dma_active = true; - desc = chan->device->device_prep_slave_sg(chan, sg, ret, + desc = dmaengine_prep_slave_sg(chan, sg, ret, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); } @@ -746,7 +746,6 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host, case MMC_SET_WRITE_PROT: case MMC_CLR_WRITE_PROT: case MMC_ERASE: - case MMC_GEN_CMD: tmp |= CMD_SET_RBSY; break; } @@ -829,7 +828,6 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host, case MMC_SET_WRITE_PROT: case MMC_CLR_WRITE_PROT: case MMC_ERASE: - case MMC_GEN_CMD: mask = MASK_START_CMD | MASK_MRBSYE; break; default: diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index 58da3c4..934b68e 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -90,6 +90,15 @@ static int sh_mobile_sdhi_write16_hook(struct tmio_mmc_host *host, int addr) return 0; } +static void sh_mobile_sdhi_cd_wakeup(const struct platform_device *pdev) +{ + mmc_detect_change(dev_get_drvdata(&pdev->dev), msecs_to_jiffies(100)); +} + +static const struct sh_mobile_sdhi_ops sdhi_ops = { + .cd_wakeup = sh_mobile_sdhi_cd_wakeup, +}; + static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) { struct sh_mobile_sdhi *priv; @@ -109,6 +118,12 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data = &priv->mmc_data; p->pdata = mmc_data; + if (p->init) { + ret = p->init(pdev, &sdhi_ops); + if (ret) + goto einit; + } + snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id); priv->clk = clk_get(&pdev->dev, clk_name); if (IS_ERR(priv->clk)) { @@ -117,8 +132,6 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) goto eclkget; } - clk_enable(priv->clk); - mmc_data->hclk = clk_get_rate(priv->clk); mmc_data->set_pwr = sh_mobile_sdhi_set_pwr; mmc_data->get_cd = sh_mobile_sdhi_get_cd; @@ -129,6 +142,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data->write16_hook = sh_mobile_sdhi_write16_hook; mmc_data->ocr_mask = p->tmio_ocr_mask; mmc_data->capabilities |= p->tmio_caps; + mmc_data->cd_gpio = p->cd_gpio; if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) { priv->param_tx.slave_id = p->dma_slave_tx; @@ -211,7 +225,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n", mmc_hostname(host->mmc), (unsigned long) - (platform_get_resource(pdev,IORESOURCE_MEM, 0)->start), + (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start), mmc_data->hclk / 1000000); return ret; @@ -232,9 +246,11 @@ eirq_sdio: eirq_card_detect: tmio_mmc_host_remove(host); eprobe: - clk_disable(priv->clk); clk_put(priv->clk); eclkget: + if (p->cleanup) + p->cleanup(pdev); +einit: kfree(priv); return ret; } @@ -258,8 +274,11 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev) free_irq(irq, host); } - clk_disable(priv->clk); clk_put(priv->clk); + + if (p->cleanup) + p->cleanup(pdev); + kfree(priv); return 0; diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index f96c536..d857f5c 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -47,16 +47,14 @@ struct tmio_mmc_host { struct mmc_request *mrq; struct mmc_data *data; struct mmc_host *mmc; - unsigned int sdio_irq_enabled; + + /* Controller power state */ + bool power; /* Callbacks for clock / power control */ void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); - int pm_error; - /* recognise system-wide suspend in runtime PM methods */ - bool pm_global; - /* pio related stuff */ struct scatterlist *sg_ptr; struct scatterlist *sg_orig; @@ -86,6 +84,7 @@ struct tmio_mmc_host { spinlock_t lock; /* protect host private data */ unsigned long last_req_ts; struct mutex ios_lock; /* protect set_ios() context */ + bool native_hotplug; }; int tmio_mmc_host_probe(struct tmio_mmc_host **host, diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index 8253ec1..fff9286 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -88,7 +88,7 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE); if (ret > 0) - desc = chan->device->device_prep_slave_sg(chan, sg, ret, + desc = dmaengine_prep_slave_sg(chan, sg, ret, DMA_DEV_TO_MEM, DMA_CTRL_ACK); if (desc) { @@ -169,7 +169,7 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE); if (ret > 0) - desc = chan->device->device_prep_slave_sg(chan, sg, ret, + desc = dmaengine_prep_slave_sg(chan, sg, ret, DMA_MEM_TO_DEV, DMA_CTRL_ACK); if (desc) { diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index e219889..9a7996a 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -34,6 +34,7 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/mfd/tmio.h> +#include <linux/mmc/cd-gpio.h> #include <linux/mmc/host.h> #include <linux/mmc/tmio.h> #include <linux/module.h> @@ -127,7 +128,6 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) struct tmio_mmc_host *host = mmc_priv(mmc); if (enable) { - host->sdio_irq_enabled = 1; host->sdio_irq_mask = TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ; sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); @@ -136,7 +136,6 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) host->sdio_irq_mask = TMIO_SDIO_MASK_ALL; sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); - host->sdio_irq_enabled = 0; } } @@ -304,6 +303,7 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command { struct mmc_data *data = host->data; int c = cmd->opcode; + u32 irq_mask = TMIO_MASK_CMD; /* Command 12 is handled by hardware */ if (cmd->opcode == 12 && !cmd->arg) { @@ -339,7 +339,9 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command c |= TRANSFER_READ; } - tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD); + if (!host->native_hotplug) + irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); + tmio_mmc_enable_mmc_irqs(host, irq_mask); /* Fire off the command */ sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); @@ -758,7 +760,7 @@ fail: static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct tmio_mmc_host *host = mmc_priv(mmc); - struct tmio_mmc_data *pdata = host->pdata; + struct device *dev = &host->pdev->dev; unsigned long flags; mutex_lock(&host->ios_lock); @@ -766,13 +768,13 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_lock_irqsave(&host->lock, flags); if (host->mrq) { if (IS_ERR(host->mrq)) { - dev_dbg(&host->pdev->dev, + dev_dbg(dev, "%s.%d: concurrent .set_ios(), clk %u, mode %u\n", current->comm, task_pid_nr(current), ios->clock, ios->power_mode); host->mrq = ERR_PTR(-EINTR); } else { - dev_dbg(&host->pdev->dev, + dev_dbg(dev, "%s.%d: CMD%u active since %lu, now %lu!\n", current->comm, task_pid_nr(current), host->mrq->cmd->opcode, host->last_req_ts, jiffies); @@ -788,13 +790,15 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_unlock_irqrestore(&host->lock, flags); /* - * pdata->power == false only if COLD_CD is available, otherwise only - * in short time intervals during probing or resuming + * host->power toggles between false and true in both cases - either + * or not the controller can be runtime-suspended during inactivity. + * But if the controller has to be kept on, the runtime-pm usage_count + * is kept positive, so no suspending actually takes place. */ if (ios->power_mode == MMC_POWER_ON && ios->clock) { - if (!pdata->power) { - pm_runtime_get_sync(&host->pdev->dev); - pdata->power = true; + if (!host->power) { + pm_runtime_get_sync(dev); + host->power = true; } tmio_mmc_set_clock(host, ios->clock); /* power up SD bus */ @@ -805,9 +809,9 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } else if (ios->power_mode != MMC_POWER_UP) { if (host->set_pwr && ios->power_mode == MMC_POWER_OFF) host->set_pwr(host->pdev, 0); - if (pdata->power) { - pdata->power = false; - pm_runtime_put(&host->pdev->dev); + if (host->power) { + host->power = false; + pm_runtime_put(dev); } tmio_mmc_clk_stop(host); } @@ -913,7 +917,11 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, else mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - pdata->power = false; + _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD || + mmc->caps & MMC_CAP_NEEDS_POLL || + mmc->caps & MMC_CAP_NONREMOVABLE); + + _host->power = false; pm_runtime_enable(&pdev->dev); ret = pm_runtime_resume(&pdev->dev); if (ret < 0) @@ -926,14 +934,13 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, * 3) a worker thread polls the sdhi - indicated by MMC_CAP_NEEDS_POLL * 4) the medium is non-removable - indicated by MMC_CAP_NONREMOVABLE * - * While we increment the rtpm counter for all scenarios when the mmc - * core activates us by calling an appropriate set_ios(), we must + * While we increment the runtime PM counter for all scenarios when + * the mmc core activates us by calling an appropriate set_ios(), we + * must additionally ensure that in case 2) the tmio mmc hardware stays * additionally ensure that in case 2) the tmio mmc hardware stays * powered on during runtime for the card detection to work. */ - if (!(pdata->flags & TMIO_MMC_HAS_COLD_CD - || mmc->caps & MMC_CAP_NEEDS_POLL - || mmc->caps & MMC_CAP_NONREMOVABLE)) + if (_host->native_hotplug) pm_runtime_get_noresume(&pdev->dev); tmio_mmc_clk_stop(_host); @@ -963,9 +970,19 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, irq_mask |= TMIO_MASK_READOP; if (!_host->chan_tx) irq_mask |= TMIO_MASK_WRITEOP; + if (!_host->native_hotplug) + irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); tmio_mmc_enable_mmc_irqs(_host, irq_mask); + if (pdata->flags & TMIO_MMC_USE_GPIO_CD) { + ret = mmc_cd_gpio_request(mmc, pdata->cd_gpio); + if (ret < 0) { + tmio_mmc_host_remove(_host); + return ret; + } + } + *host = _host; return 0; @@ -983,22 +1000,22 @@ EXPORT_SYMBOL(tmio_mmc_host_probe); void tmio_mmc_host_remove(struct tmio_mmc_host *host) { struct platform_device *pdev = host->pdev; + struct tmio_mmc_data *pdata = host->pdata; + struct mmc_host *mmc = host->mmc; - /* - * We don't have to manipulate pdata->power here: if there is a card in - * the slot, the runtime PM is active and our .runtime_resume() will not - * be run. If there is no card in the slot and the platform can suspend - * the controller, the runtime PM is suspended and pdata->power == false, - * so, our .runtime_resume() will not try to detect a card in the slot. - */ - if (host->pdata->flags & TMIO_MMC_HAS_COLD_CD - || host->mmc->caps & MMC_CAP_NEEDS_POLL - || host->mmc->caps & MMC_CAP_NONREMOVABLE) + if (pdata->flags & TMIO_MMC_USE_GPIO_CD) + /* + * This means we can miss a card-eject, but this is anyway + * possible, because of delayed processing of hotplug events. + */ + mmc_cd_gpio_free(mmc); + + if (!host->native_hotplug) pm_runtime_get_sync(&pdev->dev); dev_pm_qos_hide_latency_limit(&pdev->dev); - mmc_remove_host(host->mmc); + mmc_remove_host(mmc); cancel_work_sync(&host->done); cancel_delayed_work_sync(&host->delayed_reset_work); tmio_mmc_release_dma(host); @@ -1007,7 +1024,7 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host) pm_runtime_disable(&pdev->dev); iounmap(host->ctl); - mmc_free_host(host->mmc); + mmc_free_host(mmc); } EXPORT_SYMBOL(tmio_mmc_host_remove); @@ -1021,8 +1038,6 @@ int tmio_mmc_host_suspend(struct device *dev) if (!ret) tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL); - host->pm_error = pm_runtime_put_sync(dev); - return ret; } EXPORT_SYMBOL(tmio_mmc_host_suspend); @@ -1032,20 +1047,10 @@ int tmio_mmc_host_resume(struct device *dev) struct mmc_host *mmc = dev_get_drvdata(dev); struct tmio_mmc_host *host = mmc_priv(mmc); - /* The MMC core will perform the complete set up */ - host->pdata->power = false; - - host->pm_global = true; - if (!host->pm_error) - pm_runtime_get_sync(dev); - - if (host->pm_global) { - /* Runtime PM resume callback didn't run */ - tmio_mmc_reset(host); - tmio_mmc_enable_dma(host, true); - host->pm_global = false; - } + tmio_mmc_reset(host); + tmio_mmc_enable_dma(host, true); + /* The MMC core will perform the complete set up */ return mmc_resume_host(mmc); } EXPORT_SYMBOL(tmio_mmc_host_resume); @@ -1062,19 +1067,10 @@ int tmio_mmc_host_runtime_resume(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); struct tmio_mmc_host *host = mmc_priv(mmc); - struct tmio_mmc_data *pdata = host->pdata; tmio_mmc_reset(host); tmio_mmc_enable_dma(host, true); - if (pdata->power) { - /* Only entered after a card-insert interrupt */ - if (!mmc->card) - tmio_mmc_set_ios(mmc, &mmc->ios); - mmc_detect_change(mmc, msecs_to_jiffies(100)); - } - host->pm_global = false; - return 0; } EXPORT_SYMBOL(tmio_mmc_host_runtime_resume); diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 1be6218..5760c1a 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,6 +1,6 @@ menuconfig MTD tristate "Memory Technology Device (MTD) support" - depends on HAS_IOMEM + depends on GENERIC_IO help Memory Technology Devices are flash, RAM and similar chips, often used for solid state file systems on embedded devices. This option @@ -304,9 +304,6 @@ config MTD_OOPS buffer in a flash partition where it can be read back at some later point. - To use, add console=ttyMTDx to the kernel command line, - where x is the MTD device number to use. - config MTD_SWAP tristate "Swap on MTD device support" depends on MTD && SWAP diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 9bcd1f4..dbbd2ed 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -87,7 +87,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private ** static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); -static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len); +static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len); static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode); static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode); @@ -262,9 +262,9 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd) static void fixup_use_point(struct mtd_info *mtd) { struct map_info *map = mtd->priv; - if (!mtd->point && map_is_linear(map)) { - mtd->point = cfi_intelext_point; - mtd->unpoint = cfi_intelext_unpoint; + if (!mtd->_point && map_is_linear(map)) { + mtd->_point = cfi_intelext_point; + mtd->_unpoint = cfi_intelext_unpoint; } } @@ -274,8 +274,8 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if (cfi->cfiq->BufWriteTimeoutTyp) { printk(KERN_INFO "Using buffer write method\n" ); - mtd->write = cfi_intelext_write_buffers; - mtd->writev = cfi_intelext_writev; + mtd->_write = cfi_intelext_write_buffers; + mtd->_writev = cfi_intelext_writev; } } @@ -443,15 +443,15 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->erase = cfi_intelext_erase_varsize; - mtd->read = cfi_intelext_read; - mtd->write = cfi_intelext_write_words; - mtd->sync = cfi_intelext_sync; - mtd->lock = cfi_intelext_lock; - mtd->unlock = cfi_intelext_unlock; - mtd->is_locked = cfi_intelext_is_locked; - mtd->suspend = cfi_intelext_suspend; - mtd->resume = cfi_intelext_resume; + mtd->_erase = cfi_intelext_erase_varsize; + mtd->_read = cfi_intelext_read; + mtd->_write = cfi_intelext_write_words; + mtd->_sync = cfi_intelext_sync; + mtd->_lock = cfi_intelext_lock; + mtd->_unlock = cfi_intelext_unlock; + mtd->_is_locked = cfi_intelext_is_locked; + mtd->_suspend = cfi_intelext_suspend; + mtd->_resume = cfi_intelext_resume; mtd->flags = MTD_CAP_NORFLASH; mtd->name = map->name; mtd->writesize = 1; @@ -600,12 +600,12 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd) } #ifdef CONFIG_MTD_OTP - mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; - mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg; - mtd->write_user_prot_reg = cfi_intelext_write_user_prot_reg; - mtd->lock_user_prot_reg = cfi_intelext_lock_user_prot_reg; - mtd->get_fact_prot_info = cfi_intelext_get_fact_prot_info; - mtd->get_user_prot_info = cfi_intelext_get_user_prot_info; + mtd->_read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; + mtd->_read_user_prot_reg = cfi_intelext_read_user_prot_reg; + mtd->_write_user_prot_reg = cfi_intelext_write_user_prot_reg; + mtd->_lock_user_prot_reg = cfi_intelext_lock_user_prot_reg; + mtd->_get_fact_prot_info = cfi_intelext_get_fact_prot_info; + mtd->_get_user_prot_info = cfi_intelext_get_user_prot_info; #endif /* This function has the potential to distort the reality @@ -1017,8 +1017,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad case FL_READY: case FL_STATUS: case FL_JEDEC_QUERY: - /* We should really make set_vpp() count, rather than doing this */ - DISABLE_VPP(map); break; default: printk(KERN_ERR "%s: put_chip() called with oldstate %d!!\n", map->name, chip->oldstate); @@ -1324,7 +1322,7 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len, int chipnum; int ret = 0; - if (!map->virt || (from + len > mtd->size)) + if (!map->virt) return -EINVAL; /* Now lock the chip(s) to POINT state */ @@ -1334,7 +1332,6 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len, ofs = from - (chipnum << cfi->chipshift); *virt = map->virt + cfi->chips[chipnum].start + ofs; - *retlen = 0; if (phys) *phys = map->phys + cfi->chips[chipnum].start + ofs; @@ -1369,12 +1366,12 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; unsigned long ofs; - int chipnum; + int chipnum, err = 0; /* Now unlock the chip(s) POINT state */ @@ -1382,7 +1379,7 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - while (len) { + while (len && !err) { unsigned long thislen; struct flchip *chip; @@ -1400,8 +1397,10 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) chip->ref_point_counter--; if(chip->ref_point_counter == 0) chip->state = FL_READY; - } else - printk(KERN_ERR "%s: Warning: unpoint called on non pointed region\n", map->name); /* Should this give an error? */ + } else { + printk(KERN_ERR "%s: Error: unpoint called on non pointed region\n", map->name); + err = -EINVAL; + } put_chip(map, chip, chip->start); mutex_unlock(&chip->mutex); @@ -1410,6 +1409,8 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) ofs = 0; chipnum++; } + + return err; } static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) @@ -1456,8 +1457,6 @@ static int cfi_intelext_read (struct mtd_info *mtd, loff_t from, size_t len, siz chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - *retlen = 0; - while (len) { unsigned long thislen; @@ -1551,7 +1550,8 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, } xip_enable(map, chip, adr); - out: put_chip(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; } @@ -1565,10 +1565,6 @@ static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t le int chipnum; unsigned long ofs; - *retlen = 0; - if (!len) - return 0; - chipnum = to >> cfi->chipshift; ofs = to - (chipnum << cfi->chipshift); @@ -1794,7 +1790,8 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, } xip_enable(map, chip, cmd_adr); - out: put_chip(map, chip, cmd_adr); + out: DISABLE_VPP(map); + put_chip(map, chip, cmd_adr); mutex_unlock(&chip->mutex); return ret; } @@ -1813,7 +1810,6 @@ static int cfi_intelext_writev (struct mtd_info *mtd, const struct kvec *vecs, for (i = 0; i < count; i++) len += vecs[i].iov_len; - *retlen = 0; if (!len) return 0; @@ -1932,6 +1928,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, ret = -EIO; } else if (chipstatus & 0x20 && retries--) { printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus); + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); goto retry; @@ -1944,7 +1941,8 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, } xip_enable(map, chip, adr); - out: put_chip(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; } @@ -2086,7 +2084,8 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip } xip_enable(map, chip, adr); -out: put_chip(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; } @@ -2483,7 +2482,7 @@ static int cfi_intelext_suspend(struct mtd_info *mtd) allowed to. Or should we return -EAGAIN, because the upper layers ought to have already shut down anything which was using the device anyway? The latter for now. */ - printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->oldstate); + printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state); ret = -EAGAIN; case FL_PM_SUSPENDED: break; diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 8d70895..d02592e 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -59,6 +59,9 @@ static void cfi_amdstd_resume (struct mtd_info *); static int cfi_amdstd_reboot(struct notifier_block *, unsigned long, void *); static int cfi_amdstd_secsi_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + static void cfi_amdstd_destroy(struct mtd_info *); struct mtd_info *cfi_cmdset_0002(struct map_info *, int); @@ -189,7 +192,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if (cfi->cfiq->BufWriteTimeoutTyp) { pr_debug("Using buffer write method\n" ); - mtd->write = cfi_amdstd_write_buffers; + mtd->_write = cfi_amdstd_write_buffers; } } @@ -228,8 +231,8 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd) static void fixup_use_secsi(struct mtd_info *mtd) { /* Setup for chips with a secsi area */ - mtd->read_user_prot_reg = cfi_amdstd_secsi_read; - mtd->read_fact_prot_reg = cfi_amdstd_secsi_read; + mtd->_read_user_prot_reg = cfi_amdstd_secsi_read; + mtd->_read_fact_prot_reg = cfi_amdstd_secsi_read; } static void fixup_use_erase_chip(struct mtd_info *mtd) @@ -238,7 +241,7 @@ static void fixup_use_erase_chip(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if ((cfi->cfiq->NumEraseRegions == 1) && ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0)) { - mtd->erase = cfi_amdstd_erase_chip; + mtd->_erase = cfi_amdstd_erase_chip; } } @@ -249,8 +252,8 @@ static void fixup_use_erase_chip(struct mtd_info *mtd) */ static void fixup_use_atmel_lock(struct mtd_info *mtd) { - mtd->lock = cfi_atmel_lock; - mtd->unlock = cfi_atmel_unlock; + mtd->_lock = cfi_atmel_lock; + mtd->_unlock = cfi_atmel_unlock; mtd->flags |= MTD_POWERUP_LOCK; } @@ -429,12 +432,12 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->erase = cfi_amdstd_erase_varsize; - mtd->write = cfi_amdstd_write_words; - mtd->read = cfi_amdstd_read; - mtd->sync = cfi_amdstd_sync; - mtd->suspend = cfi_amdstd_suspend; - mtd->resume = cfi_amdstd_resume; + mtd->_erase = cfi_amdstd_erase_varsize; + mtd->_write = cfi_amdstd_write_words; + mtd->_read = cfi_amdstd_read; + mtd->_sync = cfi_amdstd_sync; + mtd->_suspend = cfi_amdstd_suspend; + mtd->_resume = cfi_amdstd_resume; mtd->flags = MTD_CAP_NORFLASH; mtd->name = map->name; mtd->writesize = 1; @@ -443,6 +446,7 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) pr_debug("MTD %s(): write buffer size %d\n", __func__, mtd->writebufsize); + mtd->_panic_write = cfi_amdstd_panic_write; mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot; if (cfi->cfi_mode==CFI_MODE_CFI){ @@ -770,8 +774,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad case FL_READY: case FL_STATUS: - /* We should really make set_vpp() count, rather than doing this */ - DISABLE_VPP(map); break; default: printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate); @@ -1013,13 +1015,9 @@ static int cfi_amdstd_read (struct mtd_info *mtd, loff_t from, size_t len, size_ int ret = 0; /* ofs: offset within the first chip that the first read should start */ - chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - - *retlen = 0; - while (len) { unsigned long thislen; @@ -1097,16 +1095,11 @@ static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len, int chipnum; int ret = 0; - /* ofs: offset within the first chip that the first read should start */ - /* 8 secsi bytes per chip */ chipnum=from>>3; ofs=from & 7; - - *retlen = 0; - while (len) { unsigned long thislen; @@ -1234,6 +1227,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, xip_enable(map, chip, adr); op_done: chip->state = FL_READY; + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); @@ -1251,10 +1245,6 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, unsigned long ofs, chipstart; DECLARE_WAITQUEUE(wait, current); - *retlen = 0; - if (!len) - return 0; - chipnum = to >> cfi->chipshift; ofs = to - (chipnum << cfi->chipshift); chipstart = cfi->chips[chipnum].start; @@ -1476,6 +1466,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, ret = -EIO; op_done: chip->state = FL_READY; + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); @@ -1493,10 +1484,6 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, int chipnum; unsigned long ofs; - *retlen = 0; - if (!len) - return 0; - chipnum = to >> cfi->chipshift; ofs = to - (chipnum << cfi->chipshift); @@ -1562,6 +1549,238 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, return 0; } +/* + * Wait for the flash chip to become ready to write data + * + * This is only called during the panic_write() path. When panic_write() + * is called, the kernel is in the process of a panic, and will soon be + * dead. Therefore we don't take any locks, and attempt to get access + * to the chip as soon as possible. + */ +static int cfi_amdstd_panic_wait(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + int retries = 10; + int i; + + /* + * If the driver thinks the chip is idle, and no toggle bits + * are changing, then the chip is actually idle for sure. + */ + if (chip->state == FL_READY && chip_ready(map, adr)) + return 0; + + /* + * Try several times to reset the chip and then wait for it + * to become idle. The upper limit of a few milliseconds of + * delay isn't a big problem: the kernel is dying anyway. It + * is more important to save the messages. + */ + while (retries > 0) { + const unsigned long timeo = (HZ / 1000) + 1; + + /* send the reset command */ + map_write(map, CMD(0xF0), chip->start); + + /* wait for the chip to become ready */ + for (i = 0; i < jiffies_to_usecs(timeo); i++) { + if (chip_ready(map, adr)) + return 0; + + udelay(1); + } + } + + /* the chip never became ready */ + return -EBUSY; +} + +/* + * Write out one word of data to a single flash chip during a kernel panic + * + * This is only called during the panic_write() path. When panic_write() + * is called, the kernel is in the process of a panic, and will soon be + * dead. Therefore we don't take any locks, and attempt to get access + * to the chip as soon as possible. + * + * The implementation of this routine is intentionally similar to + * do_write_oneword(), in order to ease code maintenance. + */ +static int do_panic_write_oneword(struct map_info *map, struct flchip *chip, + unsigned long adr, map_word datum) +{ + const unsigned long uWriteTimeout = (HZ / 1000) + 1; + struct cfi_private *cfi = map->fldrv_priv; + int retry_cnt = 0; + map_word oldd; + int ret = 0; + int i; + + adr += chip->start; + + ret = cfi_amdstd_panic_wait(map, chip, adr); + if (ret) + return ret; + + pr_debug("MTD %s(): PANIC WRITE 0x%.8lx(0x%.8lx)\n", + __func__, adr, datum.x[0]); + + /* + * Check for a NOP for the case when the datum to write is already + * present - it saves time and works around buggy chips that corrupt + * data at other locations when 0xff is written to a location that + * already contains 0xff. + */ + oldd = map_read(map, adr); + if (map_word_equal(map, oldd, datum)) { + pr_debug("MTD %s(): NOP\n", __func__); + goto op_done; + } + + ENABLE_VPP(map); + +retry: + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + map_write(map, datum, adr); + + for (i = 0; i < jiffies_to_usecs(uWriteTimeout); i++) { + if (chip_ready(map, adr)) + break; + + udelay(1); + } + + if (!chip_good(map, adr, datum)) { + /* reset on all failures. */ + map_write(map, CMD(0xF0), chip->start); + /* FIXME - should have reset delay before continuing */ + + if (++retry_cnt <= MAX_WORD_RETRIES) + goto retry; + + ret = -EIO; + } + +op_done: + DISABLE_VPP(map); + return ret; +} + +/* + * Write out some data during a kernel panic + * + * This is used by the mtdoops driver to save the dying messages from a + * kernel which has panic'd. + * + * This routine ignores all of the locking used throughout the rest of the + * driver, in order to ensure that the data gets written out no matter what + * state this driver (and the flash chip itself) was in when the kernel crashed. + * + * The implementation of this routine is intentionally similar to + * cfi_amdstd_write_words(), in order to ease code maintenance. + */ +static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs, chipstart; + int ret = 0; + int chipnum; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + chipstart = cfi->chips[chipnum].start; + + /* If it's not bus aligned, do the first byte write */ + if (ofs & (map_bankwidth(map) - 1)) { + unsigned long bus_ofs = ofs & ~(map_bankwidth(map) - 1); + int i = ofs - bus_ofs; + int n = 0; + map_word tmp_buf; + + ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], bus_ofs); + if (ret) + return ret; + + /* Load 'tmp_buf' with old contents of flash */ + tmp_buf = map_read(map, bus_ofs + chipstart); + + /* Number of bytes to copy from buffer */ + n = min_t(int, len, map_bankwidth(map) - i); + + tmp_buf = map_word_load_partial(map, tmp_buf, buf, i, n); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + bus_ofs, tmp_buf); + if (ret) + return ret; + + ofs += n; + buf += n; + (*retlen) += n; + len -= n; + + if (ofs >> cfi->chipshift) { + chipnum++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + /* We are now aligned, write as much as possible */ + while (len >= map_bankwidth(map)) { + map_word datum; + + datum = map_word_load(map, buf); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + ofs, datum); + if (ret) + return ret; + + ofs += map_bankwidth(map); + buf += map_bankwidth(map); + (*retlen) += map_bankwidth(map); + len -= map_bankwidth(map); + + if (ofs >> cfi->chipshift) { + chipnum++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + + chipstart = cfi->chips[chipnum].start; + } + } + + /* Write the trailing bytes if any */ + if (len & (map_bankwidth(map) - 1)) { + map_word tmp_buf; + + ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], ofs); + if (ret) + return ret; + + tmp_buf = map_read(map, ofs + chipstart); + + tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + ofs, tmp_buf); + if (ret) + return ret; + + (*retlen) += len; + } + + return 0; +} + /* * Handle devices with one erase region, that only implement @@ -1649,6 +1868,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) chip->state = FL_READY; xip_enable(map, chip, adr); + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); @@ -1739,6 +1959,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, } chip->state = FL_READY; + DISABLE_VPP(map); put_chip(map, chip, adr); mutex_unlock(&chip->mutex); return ret; diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index 85e8018..096993f 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -228,15 +228,15 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map) } /* Also select the correct geometry setup too */ - mtd->erase = cfi_staa_erase_varsize; - mtd->read = cfi_staa_read; - mtd->write = cfi_staa_write_buffers; - mtd->writev = cfi_staa_writev; - mtd->sync = cfi_staa_sync; - mtd->lock = cfi_staa_lock; - mtd->unlock = cfi_staa_unlock; - mtd->suspend = cfi_staa_suspend; - mtd->resume = cfi_staa_resume; + mtd->_erase = cfi_staa_erase_varsize; + mtd->_read = cfi_staa_read; + mtd->_write = cfi_staa_write_buffers; + mtd->_writev = cfi_staa_writev; + mtd->_sync = cfi_staa_sync; + mtd->_lock = cfi_staa_lock; + mtd->_unlock = cfi_staa_unlock; + mtd->_suspend = cfi_staa_suspend; + mtd->_resume = cfi_staa_resume; mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE; mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */ mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; @@ -394,8 +394,6 @@ static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - *retlen = 0; - while (len) { unsigned long thislen; @@ -617,10 +615,6 @@ static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to, int chipnum; unsigned long ofs; - *retlen = 0; - if (!len) - return 0; - chipnum = to >> cfi->chipshift; ofs = to - (chipnum << cfi->chipshift); @@ -904,12 +898,6 @@ static int cfi_staa_erase_varsize(struct mtd_info *mtd, int i, first; struct mtd_erase_region_info *regions = mtd->eraseregions; - if (instr->addr > mtd->size) - return -EINVAL; - - if ((instr->len + instr->addr) > mtd->size) - return -EINVAL; - /* Check that both start and end of the requested erase are * aligned with the erasesize at the appropriate addresses. */ @@ -1155,9 +1143,6 @@ static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (len & (mtd->erasesize -1)) return -EINVAL; - if ((len + ofs) > mtd->size) - return -EINVAL; - chipnum = ofs >> cfi->chipshift; adr = ofs - (chipnum << cfi->chipshift); diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 8e46405..f992418 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -173,12 +173,6 @@ int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, int i, first; struct mtd_erase_region_info *regions = mtd->eraseregions; - if (ofs > mtd->size) - return -EINVAL; - - if ((len + ofs) > mtd->size) - return -EINVAL; - /* Check that both start and end of the requested erase are * aligned with the erasesize at the appropriate addresses. */ diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h index 89c6595..800b0e8 100644 --- a/drivers/mtd/chips/fwh_lock.h +++ b/drivers/mtd/chips/fwh_lock.h @@ -101,7 +101,7 @@ static void fixup_use_fwh_lock(struct mtd_info *mtd) { printk(KERN_NOTICE "using fwh lock/unlock method\n"); /* Setup for the chips with the fwh lock method */ - mtd->lock = fwh_lock_varsize; - mtd->unlock = fwh_unlock_varsize; + mtd->_lock = fwh_lock_varsize; + mtd->_unlock = fwh_unlock_varsize; } #endif /* FWH_LOCK_H */ diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c index f2b8729..f7a5bca 100644 --- a/drivers/mtd/chips/map_absent.c +++ b/drivers/mtd/chips/map_absent.c @@ -55,10 +55,10 @@ static struct mtd_info *map_absent_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_ABSENT; mtd->size = map->size; - mtd->erase = map_absent_erase; - mtd->read = map_absent_read; - mtd->write = map_absent_write; - mtd->sync = map_absent_sync; + mtd->_erase = map_absent_erase; + mtd->_read = map_absent_read; + mtd->_write = map_absent_write; + mtd->_sync = map_absent_sync; mtd->flags = 0; mtd->erasesize = PAGE_SIZE; mtd->writesize = 1; @@ -70,13 +70,11 @@ static struct mtd_info *map_absent_probe(struct map_info *map) static int map_absent_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - *retlen = 0; return -ENODEV; } static int map_absent_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - *retlen = 0; return -ENODEV; } diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c index 67640cc..991c2a1 100644 --- a/drivers/mtd/chips/map_ram.c +++ b/drivers/mtd/chips/map_ram.c @@ -64,11 +64,11 @@ static struct mtd_info *map_ram_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_RAM; mtd->size = map->size; - mtd->erase = mapram_erase; - mtd->get_unmapped_area = mapram_unmapped_area; - mtd->read = mapram_read; - mtd->write = mapram_write; - mtd->sync = mapram_nop; + mtd->_erase = mapram_erase; + mtd->_get_unmapped_area = mapram_unmapped_area; + mtd->_read = mapram_read; + mtd->_write = mapram_write; + mtd->_sync = mapram_nop; mtd->flags = MTD_CAP_RAM; mtd->writesize = 1; @@ -122,14 +122,10 @@ static int mapram_erase (struct mtd_info *mtd, struct erase_info *instr) unsigned long i; allff = map_word_ff(map); - for (i=0; i<instr->len; i += map_bankwidth(map)) map_write(map, allff, instr->addr + i); - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return 0; } diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index 593f73d..47a43cf 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -41,11 +41,11 @@ static struct mtd_info *map_rom_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_ROM; mtd->size = map->size; - mtd->get_unmapped_area = maprom_unmapped_area; - mtd->read = maprom_read; - mtd->write = maprom_write; - mtd->sync = maprom_nop; - mtd->erase = maprom_erase; + mtd->_get_unmapped_area = maprom_unmapped_area; + mtd->_read = maprom_read; + mtd->_write = maprom_write; + mtd->_sync = maprom_nop; + mtd->_erase = maprom_erase; mtd->flags = MTD_CAP_ROM; mtd->erasesize = map->size; mtd->writesize = 1; @@ -85,8 +85,7 @@ static void maprom_nop(struct mtd_info *mtd) static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - printk(KERN_NOTICE "maprom_write called\n"); - return -EIO; + return -EROFS; } static int maprom_erase (struct mtd_info *mtd, struct erase_info *info) diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 37b05c3..4cdb2af 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -1,5 +1,6 @@ menu "Self-contained MTD device drivers" depends on MTD!=n + depends on HAS_IOMEM config MTD_PMC551 tristate "Ramix PMC551 PCI Mezzanine RAM card support" @@ -102,6 +103,13 @@ config M25PXX_USE_FAST_READ help This option enables FAST_READ access supported by ST M25Pxx. +config MTD_SPEAR_SMI + tristate "SPEAR MTD NOR Support through SMI controller" + depends on PLAT_SPEAR + default y + help + This enable SNOR support on SPEAR platforms using SMI controller + config MTD_SST25L tristate "Support SST25L (non JEDEC) SPI Flash chips" depends on SPI_MASTER diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 56c7cd4..a4dd1d8 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o CFLAGS_docg3.o += -I$(src)
\ No newline at end of file diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index e7e46d1..a4a80b7 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -104,14 +104,6 @@ static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len, int offset = from & (PAGE_SIZE-1); int cpylen; - if (from > mtd->size) - return -EINVAL; - if (from + len > mtd->size) - len = mtd->size - from; - - if (retlen) - *retlen = 0; - while (len) { if ((offset + len) > PAGE_SIZE) cpylen = PAGE_SIZE - offset; // multiple pages @@ -148,8 +140,6 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf, int offset = to & ~PAGE_MASK; // page offset int cpylen; - if (retlen) - *retlen = 0; while (len) { if ((offset+len) > PAGE_SIZE) cpylen = PAGE_SIZE - offset; // multiple pages @@ -188,13 +178,6 @@ static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len, struct block2mtd_dev *dev = mtd->priv; int err; - if (!len) - return 0; - if (to >= mtd->size) - return -ENOSPC; - if (to + len > mtd->size) - len = mtd->size - to; - mutex_lock(&dev->write_mutex); err = _block2mtd_write(dev, buf, to, len, retlen); mutex_unlock(&dev->write_mutex); @@ -283,13 +266,14 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; dev->mtd.erasesize = erase_size; dev->mtd.writesize = 1; + dev->mtd.writebufsize = PAGE_SIZE; dev->mtd.type = MTD_RAM; dev->mtd.flags = MTD_CAP_RAM; - dev->mtd.erase = block2mtd_erase; - dev->mtd.write = block2mtd_write; - dev->mtd.writev = mtd_writev; - dev->mtd.sync = block2mtd_sync; - dev->mtd.read = block2mtd_read; + dev->mtd._erase = block2mtd_erase; + dev->mtd._write = block2mtd_write; + dev->mtd._writev = mtd_writev; + dev->mtd._sync = block2mtd_sync; + dev->mtd._read = block2mtd_read; dev->mtd.priv = dev; dev->mtd.owner = THIS_MODULE; diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c index b1cdf64..a4eb8b5 100644 --- a/drivers/mtd/devices/doc2000.c +++ b/drivers/mtd/devices/doc2000.c @@ -562,14 +562,15 @@ void DoC2k_init(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; mutex_init(&this->lock); @@ -602,13 +603,7 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, int i, len256 = 0, ret=0; size_t left = len; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - mutex_lock(&this->lock); - - *retlen = 0; while (left) { len = left; @@ -748,13 +743,7 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, size_t left = len; int status; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - mutex_lock(&this->lock); - - *retlen = 0; while (left) { len = left; diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c index 7543b98..f692795 100644 --- a/drivers/mtd/devices/doc2001.c +++ b/drivers/mtd/devices/doc2001.c @@ -346,14 +346,15 @@ void DoCMil_init(struct mtd_info *mtd) /* FIXME: erase size is not always 8KiB */ mtd->erasesize = 0x2000; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; @@ -383,10 +384,6 @@ static int doc_read (struct mtd_info *mtd, loff_t from, size_t len, void __iomem *docptr = this->virtadr; struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - /* Don't allow a single read to cross a 512-byte block boundary */ if (from + len > ((from | 0x1ff) + 1)) len = ((from | 0x1ff) + 1) - from; @@ -494,10 +491,6 @@ static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, void __iomem *docptr = this->virtadr; struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - #if 0 /* Don't allow a single write to cross a 512-byte block boundary */ if (to + len > ( (to | 0x1ff) + 1)) @@ -599,7 +592,6 @@ static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, printk("Error programming flash\n"); /* Error in programming FIXME: implement Bad Block Replacement (in nftl.c ??) */ - *retlen = 0; ret = -EIO; } dummy = ReadDOC(docptr, LastDataRead); diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 177510d..04eb2e4 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -467,14 +467,15 @@ void DoCMilPlus_init(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->writesize = 512; + mtd->writebufsize = mtd->writesize = 512; mtd->oobsize = 16; + mtd->ecc_strength = 2; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; @@ -581,10 +582,6 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, void __iomem * docptr = this->virtadr; struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - /* Don't allow a single read to cross a 512-byte block boundary */ if (from + len > ((from | 0x1ff) + 1)) len = ((from | 0x1ff) + 1) - from; @@ -700,10 +697,6 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, void __iomem * docptr = this->virtadr; struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - /* Don't allow write past end of device */ - if (to >= this->totlen) - return -EINVAL; - /* Don't allow writes which aren't exactly one block (512 bytes) */ if ((to & 0x1ff) || (len != 0x200)) return -EINVAL; @@ -800,7 +793,6 @@ static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, printk("MTD: Error 0x%x programming at 0x%x\n", dummy, (int)to); /* Error in programming FIXME: implement Bad Block Replacement (in nftl.c ??) */ - *retlen = 0; ret = -EIO; } dummy = ReadDOC(docptr, Mplus_LastDataRead); diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index ad11ef0a..8272c02 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -80,14 +80,9 @@ static struct nand_ecclayout docg3_oobinfo = { .oobavail = 8, }; -/** - * struct docg3_bch - BCH engine - */ -static struct bch_control *docg3_bch; - static inline u8 doc_readb(struct docg3 *docg3, u16 reg) { - u8 val = readb(docg3->base + reg); + u8 val = readb(docg3->cascade->base + reg); trace_docg3_io(0, 8, reg, (int)val); return val; @@ -95,7 +90,7 @@ static inline u8 doc_readb(struct docg3 *docg3, u16 reg) static inline u16 doc_readw(struct docg3 *docg3, u16 reg) { - u16 val = readw(docg3->base + reg); + u16 val = readw(docg3->cascade->base + reg); trace_docg3_io(0, 16, reg, (int)val); return val; @@ -103,13 +98,13 @@ static inline u16 doc_readw(struct docg3 *docg3, u16 reg) static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg) { - writeb(val, docg3->base + reg); + writeb(val, docg3->cascade->base + reg); trace_docg3_io(1, 8, reg, val); } static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg) { - writew(val, docg3->base + reg); + writew(val, docg3->cascade->base + reg); trace_docg3_io(1, 16, reg, val); } @@ -643,7 +638,8 @@ static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc) for (i = 0; i < DOC_ECC_BCH_SIZE; i++) ecc[i] = bitrev8(hwecc[i]); - numerrs = decode_bch(docg3_bch, NULL, DOC_ECC_BCH_COVERED_BYTES, + numerrs = decode_bch(docg3->cascade->bch, NULL, + DOC_ECC_BCH_COVERED_BYTES, NULL, ecc, NULL, errorpos); BUG_ON(numerrs == -EINVAL); if (numerrs < 0) @@ -734,7 +730,7 @@ err: * doc_read_page_getbytes - Reads bytes from a prepared page * @docg3: the device * @len: the number of bytes to be read (must be a multiple of 4) - * @buf: the buffer to be filled in + * @buf: the buffer to be filled in (or NULL is forget bytes) * @first: 1 if first time read, DOC_READADDRESS should be set * */ @@ -849,7 +845,7 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { struct docg3 *docg3 = mtd->priv; - int block0, block1, page, ret, ofs = 0; + int block0, block1, page, ret, skip, ofs = 0; u8 *oobbuf = ops->oobbuf; u8 *buf = ops->datbuf; size_t len, ooblen, nbdata, nboob; @@ -869,34 +865,36 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, doc_dbg("doc_read_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n", from, ops->mode, buf, len, oobbuf, ooblen); - if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % DOC_LAYOUT_OOB_SIZE) || - (from % DOC_LAYOUT_PAGE_SIZE)) + if (ooblen % DOC_LAYOUT_OOB_SIZE) return -EINVAL; - ret = -EINVAL; - calc_block_sector(from + len, &block0, &block1, &page, &ofs, - docg3->reliable); - if (block1 > docg3->max_block) - goto err; + if (from + len > mtd->size) + return -EINVAL; ops->oobretlen = 0; ops->retlen = 0; ret = 0; + skip = from % DOC_LAYOUT_PAGE_SIZE; + mutex_lock(&docg3->cascade->lock); while (!ret && (len > 0 || ooblen > 0)) { - calc_block_sector(from, &block0, &block1, &page, &ofs, + calc_block_sector(from - skip, &block0, &block1, &page, &ofs, docg3->reliable); - nbdata = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE); + nbdata = min_t(size_t, len, DOC_LAYOUT_PAGE_SIZE - skip); nboob = min_t(size_t, ooblen, (size_t)DOC_LAYOUT_OOB_SIZE); ret = doc_read_page_prepare(docg3, block0, block1, page, ofs); if (ret < 0) - goto err; + goto out; ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES); if (ret < 0) goto err_in_read; - ret = doc_read_page_getbytes(docg3, nbdata, buf, 1); + ret = doc_read_page_getbytes(docg3, skip, NULL, 1); + if (ret < skip) + goto err_in_read; + ret = doc_read_page_getbytes(docg3, nbdata, buf, 0); if (ret < nbdata) goto err_in_read; - doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE - nbdata, + doc_read_page_getbytes(docg3, + DOC_LAYOUT_PAGE_SIZE - nbdata - skip, NULL, 0); ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0); if (ret < nboob) @@ -950,13 +948,15 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, len -= nbdata; ooblen -= nboob; from += DOC_LAYOUT_PAGE_SIZE; + skip = 0; } +out: + mutex_unlock(&docg3->cascade->lock); return ret; err_in_read: doc_read_page_finish(docg3); -err: - return ret; + goto out; } /** @@ -1114,10 +1114,10 @@ static int doc_get_op_status(struct docg3 *docg3) */ static int doc_write_erase_wait_status(struct docg3 *docg3) { - int status, ret = 0; + int i, status, ret = 0; - if (!doc_is_ready(docg3)) - usleep_range(3000, 3000); + for (i = 0; !doc_is_ready(docg3) && i < 5; i++) + msleep(20); if (!doc_is_ready(docg3)) { doc_dbg("Timeout reached and the chip is still not ready\n"); ret = -EAGAIN; @@ -1196,18 +1196,19 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *info) int block0, block1, page, ret, ofs = 0; doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len); - doc_set_device_id(docg3, docg3->device_id); info->state = MTD_ERASE_PENDING; calc_block_sector(info->addr + info->len, &block0, &block1, &page, &ofs, docg3->reliable); ret = -EINVAL; - if (block1 > docg3->max_block || page || ofs) + if (info->addr + info->len > mtd->size || page || ofs) goto reset_err; ret = 0; calc_block_sector(info->addr, &block0, &block1, &page, &ofs, docg3->reliable); + mutex_lock(&docg3->cascade->lock); + doc_set_device_id(docg3, docg3->device_id); doc_set_reliable_mode(docg3); for (len = info->len; !ret && len > 0; len -= mtd->erasesize) { info->state = MTD_ERASING; @@ -1215,6 +1216,7 @@ static int doc_erase(struct mtd_info *mtd, struct erase_info *info) block0 += 2; block1 += 2; } + mutex_unlock(&docg3->cascade->lock); if (ret) goto reset_err; @@ -1401,7 +1403,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, struct mtd_oob_ops *ops) { struct docg3 *docg3 = mtd->priv; - int block0, block1, page, ret, pofs = 0, autoecc, oobdelta; + int ret, autoecc, oobdelta; u8 *oobbuf = ops->oobbuf; u8 *buf = ops->datbuf; size_t len, ooblen; @@ -1438,12 +1440,8 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, if (len && ooblen && (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta)) return -EINVAL; - - ret = -EINVAL; - calc_block_sector(ofs + len, &block0, &block1, &page, &pofs, - docg3->reliable); - if (block1 > docg3->max_block) - goto err; + if (ofs + len > mtd->size) + return -EINVAL; ops->oobretlen = 0; ops->retlen = 0; @@ -1457,6 +1455,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, if (autoecc < 0) return autoecc; + mutex_lock(&docg3->cascade->lock); while (!ret && len > 0) { memset(oob, 0, sizeof(oob)); if (ofs == docg3->oob_write_ofs) @@ -1477,8 +1476,9 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, } ops->retlen += DOC_LAYOUT_PAGE_SIZE; } -err: + doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return ret; } @@ -1535,9 +1535,11 @@ static ssize_t dps0_is_key_locked(struct device *dev, struct docg3 *docg3 = sysfs_dev2docg3(dev, attr); int dps0; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return sprintf(buf, "%d\n", !(dps0 & DOC_DPS_KEY_OK)); } @@ -1548,9 +1550,11 @@ static ssize_t dps1_is_key_locked(struct device *dev, struct docg3 *docg3 = sysfs_dev2docg3(dev, attr); int dps1; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return sprintf(buf, "%d\n", !(dps1 & DOC_DPS_KEY_OK)); } @@ -1565,10 +1569,12 @@ static ssize_t dps0_insert_key(struct device *dev, if (count != DOC_LAYOUT_DPS_KEY_LENGTH) return -EINVAL; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++) doc_writeb(docg3, buf[i], DOC_DPS0_KEY); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return count; } @@ -1582,10 +1588,12 @@ static ssize_t dps1_insert_key(struct device *dev, if (count != DOC_LAYOUT_DPS_KEY_LENGTH) return -EINVAL; + mutex_lock(&docg3->cascade->lock); doc_set_device_id(docg3, docg3->device_id); for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++) doc_writeb(docg3, buf[i], DOC_DPS1_KEY); doc_set_device_id(docg3, 0); + mutex_unlock(&docg3->cascade->lock); return count; } @@ -1601,13 +1609,13 @@ static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = { }; static int doc_register_sysfs(struct platform_device *pdev, - struct mtd_info **floors) + struct docg3_cascade *cascade) { int ret = 0, floor, i = 0; struct device *dev = &pdev->dev; - for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS && floors[floor]; - floor++) + for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS && + cascade->floors[floor]; floor++) for (i = 0; !ret && i < 4; i++) ret = device_create_file(dev, &doc_sys_attrs[floor][i]); if (!ret) @@ -1621,12 +1629,12 @@ static int doc_register_sysfs(struct platform_device *pdev, } static void doc_unregister_sysfs(struct platform_device *pdev, - struct mtd_info **floors) + struct docg3_cascade *cascade) { struct device *dev = &pdev->dev; int floor, i; - for (floor = 0; floor < DOC_MAX_NBFLOORS && floors[floor]; + for (floor = 0; floor < DOC_MAX_NBFLOORS && cascade->floors[floor]; floor++) for (i = 0; i < 4; i++) device_remove_file(dev, &doc_sys_attrs[floor][i]); @@ -1640,7 +1648,11 @@ static int dbg_flashctrl_show(struct seq_file *s, void *p) struct docg3 *docg3 = (struct docg3 *)s->private; int pos = 0; - u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + u8 fctrl; + + mutex_lock(&docg3->cascade->lock); + fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n", @@ -1658,9 +1670,12 @@ static int dbg_asicmode_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; - int pos = 0; - int pctrl = doc_register_readb(docg3, DOC_ASICMODE); - int mode = pctrl & 0x03; + int pos = 0, pctrl, mode; + + mutex_lock(&docg3->cascade->lock); + pctrl = doc_register_readb(docg3, DOC_ASICMODE); + mode = pctrl & 0x03; + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (", @@ -1692,7 +1707,11 @@ static int dbg_device_id_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; int pos = 0; - int id = doc_register_readb(docg3, DOC_DEVICESELECT); + int id; + + mutex_lock(&docg3->cascade->lock); + id = doc_register_readb(docg3, DOC_DEVICESELECT); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "DeviceId = %d\n", id); return pos; @@ -1705,6 +1724,7 @@ static int dbg_protection_show(struct seq_file *s, void *p) int pos = 0; int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high; + mutex_lock(&docg3->cascade->lock); protect = doc_register_readb(docg3, DOC_PROTECTION); dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS); dps0_low = doc_register_readw(docg3, DOC_DPS0_ADDRLOW); @@ -1712,6 +1732,7 @@ static int dbg_protection_show(struct seq_file *s, void *p) dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS); dps1_low = doc_register_readw(docg3, DOC_DPS1_ADDRLOW); dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH); + mutex_unlock(&docg3->cascade->lock); pos += seq_printf(s, "Protection = 0x%02x (", protect); @@ -1804,7 +1825,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) switch (chip_id) { case DOC_CHIPID_G3: - mtd->name = kasprintf(GFP_KERNEL, "DiskOnChip G3 floor %d", + mtd->name = kasprintf(GFP_KERNEL, "docg3.%d", docg3->device_id); docg3->max_block = 2047; break; @@ -1817,16 +1838,17 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES; if (docg3->reliable == 2) mtd->erasesize /= 2; - mtd->writesize = DOC_LAYOUT_PAGE_SIZE; + mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE; mtd->oobsize = DOC_LAYOUT_OOB_SIZE; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; - mtd->block_isbad = doc_block_isbad; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; + mtd->_block_isbad = doc_block_isbad; mtd->ecclayout = &docg3_oobinfo; + mtd->ecc_strength = DOC_ECC_BCH_T; } /** @@ -1834,6 +1856,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) * @base: the io space where the device is probed * @floor: the floor of the probed device * @dev: the device + * @cascade: the cascade of chips this devices will belong to * * Checks whether a device at the specified IO range, and floor is available. * @@ -1841,8 +1864,8 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) * if a memory allocation failed. If floor 0 is checked, a reset of the ASIC is * launched. */ -static struct mtd_info *doc_probe_device(void __iomem *base, int floor, - struct device *dev) +static struct mtd_info * __init +doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev) { int ret, bbt_nbpages; u16 chip_id, chip_id_inv; @@ -1865,7 +1888,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor, docg3->dev = dev; docg3->device_id = floor; - docg3->base = base; + docg3->cascade = cascade; doc_set_device_id(docg3, docg3->device_id); if (!floor) doc_set_asic_mode(docg3, DOC_ASICMODE_RESET); @@ -1882,7 +1905,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor, switch (chip_id) { case DOC_CHIPID_G3: doc_info("Found a G3 DiskOnChip at addr %p, floor %d\n", - base, floor); + docg3->cascade->base, floor); break; default: doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id); @@ -1927,10 +1950,12 @@ static void doc_release_device(struct mtd_info *mtd) static int docg3_resume(struct platform_device *pdev) { int i; + struct docg3_cascade *cascade; struct mtd_info **docg3_floors, *mtd; struct docg3 *docg3; - docg3_floors = platform_get_drvdata(pdev); + cascade = platform_get_drvdata(pdev); + docg3_floors = cascade->floors; mtd = docg3_floors[0]; docg3 = mtd->priv; @@ -1952,11 +1977,13 @@ static int docg3_resume(struct platform_device *pdev) static int docg3_suspend(struct platform_device *pdev, pm_message_t state) { int floor, i; + struct docg3_cascade *cascade; struct mtd_info **docg3_floors, *mtd; struct docg3 *docg3; u8 ctrl, pwr_down; - docg3_floors = platform_get_drvdata(pdev); + cascade = platform_get_drvdata(pdev); + docg3_floors = cascade->floors; for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) { mtd = docg3_floors[floor]; if (!mtd) @@ -2006,7 +2033,7 @@ static int __init docg3_probe(struct platform_device *pdev) struct resource *ress; void __iomem *base; int ret, floor, found = 0; - struct mtd_info **docg3_floors; + struct docg3_cascade *cascade; ret = -ENXIO; ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -2017,17 +2044,19 @@ static int __init docg3_probe(struct platform_device *pdev) base = ioremap(ress->start, DOC_IOSPACE_SIZE); ret = -ENOMEM; - docg3_floors = kzalloc(sizeof(*docg3_floors) * DOC_MAX_NBFLOORS, - GFP_KERNEL); - if (!docg3_floors) + cascade = kzalloc(sizeof(*cascade) * DOC_MAX_NBFLOORS, + GFP_KERNEL); + if (!cascade) goto nomem1; - docg3_bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T, + cascade->base = base; + mutex_init(&cascade->lock); + cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T, DOC_ECC_BCH_PRIMPOLY); - if (!docg3_bch) + if (!cascade->bch) goto nomem2; for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) { - mtd = doc_probe_device(base, floor, dev); + mtd = doc_probe_device(cascade, floor, dev); if (IS_ERR(mtd)) { ret = PTR_ERR(mtd); goto err_probe; @@ -2038,7 +2067,7 @@ static int __init docg3_probe(struct platform_device *pdev) else continue; } - docg3_floors[floor] = mtd; + cascade->floors[floor] = mtd; ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0); if (ret) @@ -2046,26 +2075,26 @@ static int __init docg3_probe(struct platform_device *pdev) found++; } - ret = doc_register_sysfs(pdev, docg3_floors); + ret = doc_register_sysfs(pdev, cascade); if (ret) goto err_probe; if (!found) goto notfound; - platform_set_drvdata(pdev, docg3_floors); - doc_dbg_register(docg3_floors[0]->priv); + platform_set_drvdata(pdev, cascade); + doc_dbg_register(cascade->floors[0]->priv); return 0; notfound: ret = -ENODEV; dev_info(dev, "No supported DiskOnChip found\n"); err_probe: - free_bch(docg3_bch); + kfree(cascade->bch); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) - if (docg3_floors[floor]) - doc_release_device(docg3_floors[floor]); + if (cascade->floors[floor]) + doc_release_device(cascade->floors[floor]); nomem2: - kfree(docg3_floors); + kfree(cascade); nomem1: iounmap(base); noress: @@ -2080,19 +2109,19 @@ noress: */ static int __exit docg3_release(struct platform_device *pdev) { - struct mtd_info **docg3_floors = platform_get_drvdata(pdev); - struct docg3 *docg3 = docg3_floors[0]->priv; - void __iomem *base = docg3->base; + struct docg3_cascade *cascade = platform_get_drvdata(pdev); + struct docg3 *docg3 = cascade->floors[0]->priv; + void __iomem *base = cascade->base; int floor; - doc_unregister_sysfs(pdev, docg3_floors); + doc_unregister_sysfs(pdev, cascade); doc_dbg_unregister(docg3); for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) - if (docg3_floors[floor]) - doc_release_device(docg3_floors[floor]); + if (cascade->floors[floor]) + doc_release_device(cascade->floors[floor]); - kfree(docg3_floors); - free_bch(docg3_bch); + free_bch(docg3->cascade->bch); + kfree(cascade); iounmap(base); return 0; } diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h index db0da43..19fb93f 100644 --- a/drivers/mtd/devices/docg3.h +++ b/drivers/mtd/devices/docg3.h @@ -22,6 +22,8 @@ #ifndef _MTD_DOCG3_H #define _MTD_DOCG3_H +#include <linux/mtd/mtd.h> + /* * Flash memory areas : * - 0x0000 .. 0x07ff : IPL @@ -267,9 +269,23 @@ #define DOC_LAYOUT_DPS_KEY_LENGTH 8 /** + * struct docg3_cascade - Cascade of 1 to 4 docg3 chips + * @floors: floors (ie. one physical docg3 chip is one floor) + * @base: IO space to access all chips in the cascade + * @bch: the BCH correcting control structure + * @lock: lock to protect docg3 IO space from concurrent accesses + */ +struct docg3_cascade { + struct mtd_info *floors[DOC_MAX_NBFLOORS]; + void __iomem *base; + struct bch_control *bch; + struct mutex lock; +}; + +/** * struct docg3 - DiskOnChip driver private data * @dev: the device currently under control - * @base: mapped IO space + * @cascade: the cascade this device belongs to * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3) * @if_cfg: if true, reads are on 16bits, else reads are on 8bits @@ -287,7 +303,7 @@ */ struct docg3 { struct device *dev; - void __iomem *base; + struct docg3_cascade *cascade; unsigned int device_id:4; unsigned int if_cfg:1; unsigned int reliable:2; diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 3a11ea6..82bd00a 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -367,9 +367,6 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr) printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len); #endif - /* sanity checks */ - if (instr->addr + instr->len > mtd->size) return (-EINVAL); - /* * check that both start and end of the requested erase are * aligned with the erasesize at the appropriate addresses. @@ -440,10 +437,6 @@ static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retle printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len); #endif - /* sanity checks */ - if (!len) return (0); - if (from + len > mtd->size) return (-EINVAL); - /* we always read len bytes */ *retlen = len; @@ -522,11 +515,8 @@ static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len); #endif - *retlen = 0; - /* sanity checks */ if (!len) return (0); - if (to + len > mtd->size) return (-EINVAL); /* first, we write a 0xFF.... padded byte until we reach a dword boundary */ if (to & (BUSWIDTH - 1)) @@ -630,14 +620,15 @@ static int __init lart_flash_init (void) mtd.name = module_name; mtd.type = MTD_NORFLASH; mtd.writesize = 1; + mtd.writebufsize = 4; mtd.flags = MTD_CAP_NORFLASH; mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN; mtd.erasesize = FLASH_BLOCKSIZE_MAIN; mtd.numeraseregions = ARRAY_SIZE(erase_regions); mtd.eraseregions = erase_regions; - mtd.erase = flash_erase; - mtd.read = flash_read; - mtd.write = flash_write; + mtd._erase = flash_erase; + mtd._read = flash_read; + mtd._write = flash_write; mtd.owner = THIS_MODULE; #ifdef LART_DEBUG diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 7c60ddd..1924d24 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -288,9 +288,6 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) __func__, (long long)instr->addr, (long long)instr->len); - /* sanity checks */ - if (instr->addr + instr->len > flash->mtd.size) - return -EINVAL; div_u64_rem(instr->len, mtd->erasesize, &rem); if (rem) return -EINVAL; @@ -349,13 +346,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)from, len); - /* sanity checks */ - if (!len) - return 0; - - if (from + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -371,9 +361,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, t[1].len = len; spi_message_add_tail(&t[1], &m); - /* Byte count starts at zero. */ - *retlen = 0; - mutex_lock(&flash->lock); /* Wait till previous write/erase is done. */ @@ -417,15 +404,6 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)to, len); - *retlen = 0; - - /* sanity checks */ - if (!len) - return(0); - - if (to + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -509,15 +487,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), __func__, (u32)to, len); - *retlen = 0; - - /* sanity checks */ - if (!len) - return 0; - - if (to + len > flash->mtd.size) - return -EINVAL; - spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -908,14 +877,14 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.writesize = 1; flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.size = info->sector_size * info->n_sectors; - flash->mtd.erase = m25p80_erase; - flash->mtd.read = m25p80_read; + flash->mtd._erase = m25p80_erase; + flash->mtd._read = m25p80_read; /* sst flash chips use AAI word program */ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) - flash->mtd.write = sst_write; + flash->mtd._write = sst_write; else - flash->mtd.write = m25p80_write; + flash->mtd._write = m25p80_write; /* prefer "small sector" erase if possible */ if (info->flags & SECT_4K) { @@ -932,6 +901,7 @@ static int __devinit m25p_probe(struct spi_device *spi) ppdata.of_node = spi->dev.of_node; flash->mtd.dev.parent = &spi->dev; flash->page_size = info->page_size; + flash->mtd.writebufsize = flash->page_size; if (info->addr_width) flash->addr_width = info->addr_width; @@ -1004,21 +974,7 @@ static struct spi_driver m25p80_driver = { */ }; - -static int __init m25p80_init(void) -{ - return spi_register_driver(&m25p80_driver); -} - - -static void __exit m25p80_exit(void) -{ - spi_unregister_driver(&m25p80_driver); -} - - -module_init(m25p80_init); -module_exit(m25p80_exit); +module_spi_driver(m25p80_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mike Lavender"); diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index 8423fb6..182849d 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c @@ -59,12 +59,8 @@ static int ms02nv_read(struct mtd_info *mtd, loff_t from, { struct ms02nv_private *mp = mtd->priv; - if (from + len > mtd->size) - return -EINVAL; - memcpy(buf, mp->uaddr + from, len); *retlen = len; - return 0; } @@ -73,12 +69,8 @@ static int ms02nv_write(struct mtd_info *mtd, loff_t to, { struct ms02nv_private *mp = mtd->priv; - if (to + len > mtd->size) - return -EINVAL; - memcpy(mp->uaddr + to, buf, len); *retlen = len; - return 0; } @@ -215,8 +207,8 @@ static int __init ms02nv_init_one(ulong addr) mtd->size = fixsize; mtd->name = (char *)ms02nv_name; mtd->owner = THIS_MODULE; - mtd->read = ms02nv_read; - mtd->write = ms02nv_write; + mtd->_read = ms02nv_read; + mtd->_write = ms02nv_write; mtd->writesize = 1; ret = -EIO; diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 236057e..928fb0e 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -164,9 +164,6 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) dev_name(&spi->dev), (long long)instr->addr, (long long)instr->len); - /* Sanity checks */ - if (instr->addr + instr->len > mtd->size) - return -EINVAL; div_u64_rem(instr->len, priv->page_size, &rem); if (rem) return -EINVAL; @@ -252,14 +249,6 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev), (unsigned)from, (unsigned)(from + len)); - *retlen = 0; - - /* Sanity checks */ - if (!len) - return 0; - if (from + len > mtd->size) - return -EINVAL; - /* Calculate flash page/byte address */ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size); @@ -328,14 +317,6 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: write 0x%x..0x%x\n", dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len)); - *retlen = 0; - - /* Sanity checks */ - if (!len) - return 0; - if ((to + len) > mtd->size) - return -EINVAL; - spi_message_init(&msg); x[0].tx_buf = command = priv->command; @@ -490,8 +471,6 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base, if ((off + len) > 64) len = 64 - off; - if (len == 0) - return len; spi_message_init(&m); @@ -611,16 +590,16 @@ static int dataflash_write_user_otp(struct mtd_info *mtd, static char *otp_setup(struct mtd_info *device, char revision) { - device->get_fact_prot_info = dataflash_get_otp_info; - device->read_fact_prot_reg = dataflash_read_fact_otp; - device->get_user_prot_info = dataflash_get_otp_info; - device->read_user_prot_reg = dataflash_read_user_otp; + device->_get_fact_prot_info = dataflash_get_otp_info; + device->_read_fact_prot_reg = dataflash_read_fact_otp; + device->_get_user_prot_info = dataflash_get_otp_info; + device->_read_user_prot_reg = dataflash_read_user_otp; /* rev c parts (at45db321c and at45db1281 only!) use a * different write procedure; not (yet?) implemented. */ if (revision > 'c') - device->write_user_prot_reg = dataflash_write_user_otp; + device->_write_user_prot_reg = dataflash_write_user_otp; return ", OTP"; } @@ -672,9 +651,9 @@ add_dataflash_otp(struct spi_device *spi, char *name, device->owner = THIS_MODULE; device->type = MTD_DATAFLASH; device->flags = MTD_WRITEABLE; - device->erase = dataflash_erase; - device->read = dataflash_read; - device->write = dataflash_write; + device->_erase = dataflash_erase; + device->_read = dataflash_read; + device->_write = dataflash_write; device->priv = priv; device->dev.parent = &spi->dev; @@ -946,18 +925,7 @@ static struct spi_driver dataflash_driver = { /* FIXME: investigate suspend and resume... */ }; -static int __init dataflash_init(void) -{ - return spi_register_driver(&dataflash_driver); -} -module_init(dataflash_init); - -static void __exit dataflash_exit(void) -{ - spi_unregister_driver(&dataflash_driver); -} -module_exit(dataflash_exit); - +module_spi_driver(dataflash_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Andrew Victor, David Brownell"); diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index 2562689..ec59d65 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -34,34 +34,23 @@ static struct mtd_info *mtd_info; static int ram_erase(struct mtd_info *mtd, struct erase_info *instr) { - if (instr->addr + instr->len > mtd->size) - return -EINVAL; - memset((char *)mtd->priv + instr->addr, 0xff, instr->len); - instr->state = MTD_ERASE_DONE; mtd_erase_callback(instr); - return 0; } static int ram_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { - if (from + len > mtd->size) - return -EINVAL; - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - *virt = mtd->priv + from; *retlen = len; return 0; } -static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } /* @@ -80,11 +69,7 @@ static unsigned long ram_get_unmapped_area(struct mtd_info *mtd, static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - if (from + len > mtd->size) - return -EINVAL; - memcpy(buf, mtd->priv + from, len); - *retlen = len; return 0; } @@ -92,11 +77,7 @@ static int ram_read(struct mtd_info *mtd, loff_t from, size_t len, static int ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - if (to + len > mtd->size) - return -EINVAL; - memcpy((char *)mtd->priv + to, buf, len); - *retlen = len; return 0; } @@ -126,12 +107,12 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, mtd->priv = mapped_address; mtd->owner = THIS_MODULE; - mtd->erase = ram_erase; - mtd->point = ram_point; - mtd->unpoint = ram_unpoint; - mtd->get_unmapped_area = ram_get_unmapped_area; - mtd->read = ram_read; - mtd->write = ram_write; + mtd->_erase = ram_erase; + mtd->_point = ram_point; + mtd->_unpoint = ram_unpoint; + mtd->_get_unmapped_area = ram_get_unmapped_area; + mtd->_read = ram_read; + mtd->_write = ram_write; if (mtd_device_register(mtd, NULL, 0)) return -EIO; diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 23423bd..67823de 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -33,45 +33,33 @@ struct phram_mtd_list { static LIST_HEAD(phram_list); - static int phram_erase(struct mtd_info *mtd, struct erase_info *instr) { u_char *start = mtd->priv; - if (instr->addr + instr->len > mtd->size) - return -EINVAL; - memset(start + instr->addr, 0xff, instr->len); - /* This'll catch a few races. Free the thing before returning :) + /* + * This'll catch a few races. Free the thing before returning :) * I don't feel at all ashamed. This kind of thing is possible anyway * with flash, but unlikely. */ - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return 0; } static int phram_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { - if (from + len > mtd->size) - return -EINVAL; - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - *virt = mtd->priv + from; *retlen = len; return 0; } -static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } static int phram_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -79,14 +67,7 @@ static int phram_read(struct mtd_info *mtd, loff_t from, size_t len, { u_char *start = mtd->priv; - if (from >= mtd->size) - return -EINVAL; - - if (len > mtd->size - from) - len = mtd->size - from; - memcpy(buf, start + from, len); - *retlen = len; return 0; } @@ -96,20 +77,11 @@ static int phram_write(struct mtd_info *mtd, loff_t to, size_t len, { u_char *start = mtd->priv; - if (to >= mtd->size) - return -EINVAL; - - if (len > mtd->size - to) - len = mtd->size - to; - memcpy(start + to, buf, len); - *retlen = len; return 0; } - - static void unregister_devices(void) { struct phram_mtd_list *this, *safe; @@ -142,11 +114,11 @@ static int register_device(char *name, unsigned long start, unsigned long len) new->mtd.name = name; new->mtd.size = len; new->mtd.flags = MTD_CAP_RAM; - new->mtd.erase = phram_erase; - new->mtd.point = phram_point; - new->mtd.unpoint = phram_unpoint; - new->mtd.read = phram_read; - new->mtd.write = phram_write; + new->mtd._erase = phram_erase; + new->mtd._point = phram_point; + new->mtd._unpoint = phram_unpoint; + new->mtd._read = phram_read; + new->mtd._write = phram_write; new->mtd.owner = THIS_MODULE; new->mtd.type = MTD_RAM; new->mtd.erasesize = PAGE_SIZE; @@ -233,7 +205,17 @@ static inline void kill_final_newline(char *str) return 1; \ } while (0) -static int phram_setup(const char *val, struct kernel_param *kp) +/* + * This shall contain the module parameter if any. It is of the form: + * - phram=<device>,<address>,<size> for module case + * - phram.phram=<device>,<address>,<size> for built-in case + * We leave 64 bytes for the device name, 12 for the address and 12 for the + * size. + * Example: phram.phram=rootfs,0xa0000000,512Mi + */ +static __initdata char phram_paramline[64+12+12]; + +static int __init phram_setup(const char *val) { char buf[64+12+12], *str = buf; char *token[3]; @@ -282,12 +264,28 @@ static int phram_setup(const char *val, struct kernel_param *kp) return ret; } -module_param_call(phram, phram_setup, NULL, NULL, 000); +static int __init phram_param_call(const char *val, struct kernel_param *kp) +{ + /* + * This function is always called before 'init_phram()', whether + * built-in or module. + */ + if (strlen(val) >= sizeof(phram_paramline)) + return -ENOSPC; + strcpy(phram_paramline, val); + + return 0; +} + +module_param_call(phram, phram_param_call, NULL, NULL, 000); MODULE_PARM_DESC(phram, "Memory region to map. \"phram=<name>,<start>,<length>\""); static int __init init_phram(void) { + if (phram_paramline[0]) + return phram_setup(phram_paramline); + return 0; } diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index ecff765..0c51b98 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -93,14 +93,49 @@ #include <linux/fs.h> #include <linux/ioctl.h> #include <asm/io.h> -#include <asm/system.h> #include <linux/pci.h> - #include <linux/mtd/mtd.h> -#include <linux/mtd/pmc551.h> + +#define PMC551_VERSION \ + "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n" + +#define PCI_VENDOR_ID_V3_SEMI 0x11b0 +#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200 + +#define PMC551_PCI_MEM_MAP0 0x50 +#define PMC551_PCI_MEM_MAP1 0x54 +#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000 +#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0 +#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002 +#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001 + +#define PMC551_SDRAM_MA 0x60 +#define PMC551_SDRAM_CMD 0x62 +#define PMC551_DRAM_CFG 0x64 +#define PMC551_SYS_CTRL_REG 0x78 + +#define PMC551_DRAM_BLK0 0x68 +#define PMC551_DRAM_BLK1 0x6c +#define PMC551_DRAM_BLK2 0x70 +#define PMC551_DRAM_BLK3 0x74 +#define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f)) +#define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12)) +#define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8)) + +struct mypriv { + struct pci_dev *dev; + u_char *start; + u32 base_map0; + u32 curr_map0; + u32 asize; + struct mtd_info *nextpmc551; +}; static struct mtd_info *pmc551list; +static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); + static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mypriv *priv = mtd->priv; @@ -116,16 +151,6 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) #endif end = instr->addr + instr->len - 1; - - /* Is it past the end? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", - (long)end, (long)mtd->size); -#endif - return -EINVAL; - } - eoff_hi = end & ~(priv->asize - 1); soff_hi = instr->addr & ~(priv->asize - 1); eoff_lo = end & (priv->asize - 1); @@ -179,18 +204,6 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len); #endif - if (from + len > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", - (long)from + len, (long)mtd->size); -#endif - return -EINVAL; - } - - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - soff_hi = from & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); @@ -206,11 +219,12 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_unpoint()\n"); #endif + return 0; } static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -229,16 +243,6 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, #endif end = from + len - 1; - - /* Is it past the end? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", - (long)end, (long)mtd->size); -#endif - return -EINVAL; - } - soff_hi = from & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); soff_lo = from & (priv->asize - 1); @@ -296,16 +300,6 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, #endif end = to + len - 1; - /* Is it past the end? or did the u32 wrap? */ - if (end > mtd->size) { -#ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, " - "size: %ld, to: %ld)\n", (long)end, (long)mtd->size, - (long)to); -#endif - return -EINVAL; - } - soff_hi = to & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); soff_lo = to & (priv->asize - 1); @@ -359,7 +353,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, * mechanism * returns the size of the memory region found. */ -static u32 fixup_pmc551(struct pci_dev *dev) +static int fixup_pmc551(struct pci_dev *dev) { #ifdef CONFIG_MTD_PMC551_BUGFIX u32 dram_data; @@ -669,7 +663,7 @@ static int __init init_pmc551(void) struct mypriv *priv; int found = 0; struct mtd_info *mtd; - u32 length = 0; + int length = 0; if (msize) { msize = (1 << (ffs(msize) - 1)) << 20; @@ -787,11 +781,11 @@ static int __init init_pmc551(void) mtd->size = msize; mtd->flags = MTD_CAP_RAM; - mtd->erase = pmc551_erase; - mtd->read = pmc551_read; - mtd->write = pmc551_write; - mtd->point = pmc551_point; - mtd->unpoint = pmc551_unpoint; + mtd->_erase = pmc551_erase; + mtd->_read = pmc551_read; + mtd->_write = pmc551_write; + mtd->_point = pmc551_point; + mtd->_unpoint = pmc551_unpoint; mtd->type = MTD_RAM; mtd->name = "PMC551 RAM board"; mtd->erasesize = 0x10000; diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index e585263..8f52fc8 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -42,7 +42,6 @@ #include <linux/ioctl.h> #include <linux/init.h> #include <asm/io.h> -#include <asm/system.h> #include <linux/mtd/mtd.h> @@ -76,7 +75,7 @@ static slram_mtd_list_t *slram_mtdlist = NULL; static int slram_erase(struct mtd_info *, struct erase_info *); static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **, resource_size_t *); -static void slram_unpoint(struct mtd_info *, loff_t, size_t); +static int slram_unpoint(struct mtd_info *, loff_t, size_t); static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); @@ -84,21 +83,13 @@ static int slram_erase(struct mtd_info *mtd, struct erase_info *instr) { slram_priv_t *priv = mtd->priv; - if (instr->addr + instr->len > mtd->size) { - return(-EINVAL); - } - memset(priv->start + instr->addr, 0xff, instr->len); - /* This'll catch a few races. Free the thing before returning :) * I don't feel at all ashamed. This kind of thing is possible anyway * with flash, but unlikely. */ - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return(0); } @@ -107,20 +98,14 @@ static int slram_point(struct mtd_info *mtd, loff_t from, size_t len, { slram_priv_t *priv = mtd->priv; - /* can we return a physical address with this driver? */ - if (phys) - return -EINVAL; - - if (from + len > mtd->size) - return -EINVAL; - *virt = priv->start + from; *retlen = len; return(0); } -static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, @@ -128,14 +113,7 @@ static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, { slram_priv_t *priv = mtd->priv; - if (from > mtd->size) - return -EINVAL; - - if (from + len > mtd->size) - len = mtd->size - from; - memcpy(buf, priv->start + from, len); - *retlen = len; return(0); } @@ -145,11 +123,7 @@ static int slram_write(struct mtd_info *mtd, loff_t to, size_t len, { slram_priv_t *priv = mtd->priv; - if (to + len > mtd->size) - return -EINVAL; - memcpy(priv->start + to, buf, len); - *retlen = len; return(0); } @@ -200,11 +174,11 @@ static int register_device(char *name, unsigned long start, unsigned long length (*curmtd)->mtdinfo->name = name; (*curmtd)->mtdinfo->size = length; (*curmtd)->mtdinfo->flags = MTD_CAP_RAM; - (*curmtd)->mtdinfo->erase = slram_erase; - (*curmtd)->mtdinfo->point = slram_point; - (*curmtd)->mtdinfo->unpoint = slram_unpoint; - (*curmtd)->mtdinfo->read = slram_read; - (*curmtd)->mtdinfo->write = slram_write; + (*curmtd)->mtdinfo->_erase = slram_erase; + (*curmtd)->mtdinfo->_point = slram_point; + (*curmtd)->mtdinfo->_unpoint = slram_unpoint; + (*curmtd)->mtdinfo->_read = slram_read; + (*curmtd)->mtdinfo->_write = slram_write; (*curmtd)->mtdinfo->owner = THIS_MODULE; (*curmtd)->mtdinfo->type = MTD_RAM; (*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ; diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c new file mode 100644 index 0000000..797d43c --- /dev/null +++ b/drivers/mtd/devices/spear_smi.c @@ -0,0 +1,1147 @@ +/* + * SMI (Serial Memory Controller) device driver for Serial NOR Flash on + * SPEAr platform + * The serial nor interface is largely based on drivers/mtd/m25p80.c, + * however the SPI interface has been replaced by SMI. + * + * Copyright © 2010 STMicroelectronics. + * Ashish Priyadarshi + * Shiraz Hashim <shiraz.hashim@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/param.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spear_smi.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/wait.h> +#include <linux/of.h> +#include <linux/of_address.h> + +/* SMI clock rate */ +#define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */ + +/* MAX time out to safely come out of a erase or write busy conditions */ +#define SMI_PROBE_TIMEOUT (HZ / 10) +#define SMI_MAX_TIME_OUT (3 * HZ) + +/* timeout for command completion */ +#define SMI_CMD_TIMEOUT (HZ / 10) + +/* registers of smi */ +#define SMI_CR1 0x0 /* SMI control register 1 */ +#define SMI_CR2 0x4 /* SMI control register 2 */ +#define SMI_SR 0x8 /* SMI status register */ +#define SMI_TR 0xC /* SMI transmit register */ +#define SMI_RR 0x10 /* SMI receive register */ + +/* defines for control_reg 1 */ +#define BANK_EN (0xF << 0) /* enables all banks */ +#define DSEL_TIME (0x6 << 4) /* Deselect time 6 + 1 SMI_CK periods */ +#define SW_MODE (0x1 << 28) /* enables SW Mode */ +#define WB_MODE (0x1 << 29) /* Write Burst Mode */ +#define FAST_MODE (0x1 << 15) /* Fast Mode */ +#define HOLD1 (0x1 << 16) /* Clock Hold period selection */ + +/* defines for control_reg 2 */ +#define SEND (0x1 << 7) /* Send data */ +#define TFIE (0x1 << 8) /* Transmission Flag Interrupt Enable */ +#define WCIE (0x1 << 9) /* Write Complete Interrupt Enable */ +#define RD_STATUS_REG (0x1 << 10) /* reads status reg */ +#define WE (0x1 << 11) /* Write Enable */ + +#define TX_LEN_SHIFT 0 +#define RX_LEN_SHIFT 4 +#define BANK_SHIFT 12 + +/* defines for status register */ +#define SR_WIP 0x1 /* Write in progress */ +#define SR_WEL 0x2 /* Write enable latch */ +#define SR_BP0 0x4 /* Block protect 0 */ +#define SR_BP1 0x8 /* Block protect 1 */ +#define SR_BP2 0x10 /* Block protect 2 */ +#define SR_SRWD 0x80 /* SR write protect */ +#define TFF 0x100 /* Transfer Finished Flag */ +#define WCF 0x200 /* Transfer Finished Flag */ +#define ERF1 0x400 /* Forbidden Write Request */ +#define ERF2 0x800 /* Forbidden Access */ + +#define WM_SHIFT 12 + +/* flash opcodes */ +#define OPCODE_RDID 0x9f /* Read JEDEC ID */ + +/* Flash Device Ids maintenance section */ + +/* data structure to maintain flash ids from different vendors */ +struct flash_device { + char *name; + u8 erase_cmd; + u32 device_id; + u32 pagesize; + unsigned long sectorsize; + unsigned long size_in_bytes; +}; + +#define FLASH_ID(n, es, id, psize, ssize, size) \ +{ \ + .name = n, \ + .erase_cmd = es, \ + .device_id = id, \ + .pagesize = psize, \ + .sectorsize = ssize, \ + .size_in_bytes = size \ +} + +static struct flash_device flash_devices[] = { + FLASH_ID("st m25p16" , 0xd8, 0x00152020, 0x100, 0x10000, 0x200000), + FLASH_ID("st m25p32" , 0xd8, 0x00162020, 0x100, 0x10000, 0x400000), + FLASH_ID("st m25p64" , 0xd8, 0x00172020, 0x100, 0x10000, 0x800000), + FLASH_ID("st m25p128" , 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000), + FLASH_ID("st m25p05" , 0xd8, 0x00102020, 0x80 , 0x8000 , 0x10000), + FLASH_ID("st m25p10" , 0xd8, 0x00112020, 0x80 , 0x8000 , 0x20000), + FLASH_ID("st m25p20" , 0xd8, 0x00122020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m25p40" , 0xd8, 0x00132020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m25p80" , 0xd8, 0x00142020, 0x100, 0x10000, 0x100000), + FLASH_ID("st m45pe10" , 0xd8, 0x00114020, 0x100, 0x10000, 0x20000), + FLASH_ID("st m45pe20" , 0xd8, 0x00124020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m45pe40" , 0xd8, 0x00134020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m45pe80" , 0xd8, 0x00144020, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl004" , 0xd8, 0x00120201, 0x100, 0x10000, 0x80000), + FLASH_ID("sp s25fl008" , 0xd8, 0x00130201, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl016" , 0xd8, 0x00140201, 0x100, 0x10000, 0x200000), + FLASH_ID("sp s25fl032" , 0xd8, 0x00150201, 0x100, 0x10000, 0x400000), + FLASH_ID("sp s25fl064" , 0xd8, 0x00160201, 0x100, 0x10000, 0x800000), + FLASH_ID("atmel 25f512" , 0x52, 0x0065001F, 0x80 , 0x8000 , 0x10000), + FLASH_ID("atmel 25f1024" , 0x52, 0x0060001F, 0x100, 0x8000 , 0x20000), + FLASH_ID("atmel 25f2048" , 0x52, 0x0063001F, 0x100, 0x10000, 0x40000), + FLASH_ID("atmel 25f4096" , 0x52, 0x0064001F, 0x100, 0x10000, 0x80000), + FLASH_ID("atmel 25fs040" , 0xd7, 0x0004661F, 0x100, 0x10000, 0x80000), + FLASH_ID("mac 25l512" , 0xd8, 0x001020C2, 0x010, 0x10000, 0x10000), + FLASH_ID("mac 25l1005" , 0xd8, 0x001120C2, 0x010, 0x10000, 0x20000), + FLASH_ID("mac 25l2005" , 0xd8, 0x001220C2, 0x010, 0x10000, 0x40000), + FLASH_ID("mac 25l4005" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l4005a" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l8005" , 0xd8, 0x001420C2, 0x010, 0x10000, 0x100000), + FLASH_ID("mac 25l1605" , 0xd8, 0x001520C2, 0x100, 0x10000, 0x200000), + FLASH_ID("mac 25l1605a" , 0xd8, 0x001520C2, 0x010, 0x10000, 0x200000), + FLASH_ID("mac 25l3205" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l3205a" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l6405" , 0xd8, 0x001720C2, 0x100, 0x10000, 0x800000), +}; + +/* Define spear specific structures */ + +struct spear_snor_flash; + +/** + * struct spear_smi - Structure for SMI Device + * + * @clk: functional clock + * @status: current status register of SMI. + * @clk_rate: functional clock rate of SMI (default: SMI_MAX_CLOCK_FREQ) + * @lock: lock to prevent parallel access of SMI. + * @io_base: base address for registers of SMI. + * @pdev: platform device + * @cmd_complete: queue to wait for command completion of NOR-flash. + * @num_flashes: number of flashes actually present on board. + * @flash: separate structure for each Serial NOR-flash attached to SMI. + */ +struct spear_smi { + struct clk *clk; + u32 status; + unsigned long clk_rate; + struct mutex lock; + void __iomem *io_base; + struct platform_device *pdev; + wait_queue_head_t cmd_complete; + u32 num_flashes; + struct spear_snor_flash *flash[MAX_NUM_FLASH_CHIP]; +}; + +/** + * struct spear_snor_flash - Structure for Serial NOR Flash + * + * @bank: Bank number(0, 1, 2, 3) for each NOR-flash. + * @dev_id: Device ID of NOR-flash. + * @lock: lock to manage flash read, write and erase operations + * @mtd: MTD info for each NOR-flash. + * @num_parts: Total number of partition in each bank of NOR-flash. + * @parts: Partition info for each bank of NOR-flash. + * @page_size: Page size of NOR-flash. + * @base_addr: Base address of NOR-flash. + * @erase_cmd: erase command may vary on different flash types + * @fast_mode: flash supports read in fast mode + */ +struct spear_snor_flash { + u32 bank; + u32 dev_id; + struct mutex lock; + struct mtd_info mtd; + u32 num_parts; + struct mtd_partition *parts; + u32 page_size; + void __iomem *base_addr; + u8 erase_cmd; + u8 fast_mode; +}; + +static inline struct spear_snor_flash *get_flash_data(struct mtd_info *mtd) +{ + return container_of(mtd, struct spear_snor_flash, mtd); +} + +/** + * spear_smi_read_sr - Read status register of flash through SMI + * @dev: structure of SMI information. + * @bank: bank to which flash is connected + * + * This routine will return the status register of the flash chip present at the + * given bank. + */ +static int spear_smi_read_sr(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 ctrlreg1; + + mutex_lock(&dev->lock); + dev->status = 0; /* Will be set in interrupt handler */ + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + /* program smi in hw mode */ + writel(ctrlreg1 & ~(SW_MODE | WB_MODE), dev->io_base + SMI_CR1); + + /* performing a rsr instruction in hw mode */ + writel((bank << BANK_SHIFT) | RD_STATUS_REG | TFIE, + dev->io_base + SMI_CR2); + + /* wait for tff */ + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + /* copy dev->status (lower 16 bits) in order to release lock */ + if (ret > 0) + ret = dev->status & 0xffff; + else + ret = -EIO; + + /* restore the ctrl regs state */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + mutex_unlock(&dev->lock); + + return ret; +} + +/** + * spear_smi_wait_till_ready - wait till flash is ready + * @dev: structure of SMI information. + * @bank: flash corresponding to this bank + * @timeout: timeout for busy wait condition + * + * This routine checks for WIP (write in progress) bit in Status register + * If successful the routine returns 0 else -EBUSY + */ +static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank, + unsigned long timeout) +{ + unsigned long finish; + int status; + + finish = jiffies + timeout; + do { + status = spear_smi_read_sr(dev, bank); + if (status < 0) + continue; /* try till timeout */ + else if (!(status & SR_WIP)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, finish)); + + dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n"); + return status; +} + +/** + * spear_smi_int_handler - SMI Interrupt Handler. + * @irq: irq number + * @dev_id: structure of SMI device, embedded in dev_id. + * + * The handler clears all interrupt conditions and records the status in + * dev->status which is used by the driver later. + */ +static irqreturn_t spear_smi_int_handler(int irq, void *dev_id) +{ + u32 status = 0; + struct spear_smi *dev = dev_id; + + status = readl(dev->io_base + SMI_SR); + + if (unlikely(!status)) + return IRQ_NONE; + + /* clear all interrupt conditions */ + writel(0, dev->io_base + SMI_SR); + + /* copy the status register in dev->status */ + dev->status |= status; + + /* send the completion */ + wake_up_interruptible(&dev->cmd_complete); + + return IRQ_HANDLED; +} + +/** + * spear_smi_hw_init - initializes the smi controller. + * @dev: structure of smi device + * + * this routine initializes the smi controller wit the default values + */ +static void spear_smi_hw_init(struct spear_smi *dev) +{ + unsigned long rate = 0; + u32 prescale = 0; + u32 val; + + rate = clk_get_rate(dev->clk); + + /* functional clock of smi */ + prescale = DIV_ROUND_UP(rate, dev->clk_rate); + + /* + * setting the standard values, fast mode, prescaler for + * SMI_MAX_CLOCK_FREQ (50MHz) operation and bank enable + */ + val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8); + + mutex_lock(&dev->lock); + writel(val, dev->io_base + SMI_CR1); + mutex_unlock(&dev->lock); +} + +/** + * get_flash_index - match chip id from a flash list. + * @flash_id: a valid nor flash chip id obtained from board. + * + * try to validate the chip id by matching from a list, if not found then simply + * returns negative. In case of success returns index in to the flash devices + * array. + */ +static int get_flash_index(u32 flash_id) +{ + int index; + + /* Matches chip-id to entire list of 'serial-nor flash' ids */ + for (index = 0; index < ARRAY_SIZE(flash_devices); index++) { + if (flash_devices[index].device_id == flash_id) + return index; + } + + /* Memory chip is not listed and not supported */ + return -ENODEV; +} + +/** + * spear_smi_write_enable - Enable the flash to do write operation + * @dev: structure of SMI device + * @bank: enable write for flash connected to this bank + * + * Set write enable latch with Write Enable command. + * Returns 0 on success. + */ +static int spear_smi_write_enable(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 ctrlreg1; + + mutex_lock(&dev->lock); + dev->status = 0; /* Will be set in interrupt handler */ + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + /* program smi in h/w mode */ + writel(ctrlreg1 & ~SW_MODE, dev->io_base + SMI_CR1); + + /* give the flash, write enable command */ + writel((bank << BANK_SHIFT) | WE | TFIE, dev->io_base + SMI_CR2); + + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + /* restore the ctrl regs state */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + + if (ret <= 0) { + ret = -EIO; + dev_err(&dev->pdev->dev, + "smi controller failed on write enable\n"); + } else { + /* check whether write mode status is set for required bank */ + if (dev->status & (1 << (bank + WM_SHIFT))) + ret = 0; + else { + dev_err(&dev->pdev->dev, "couldn't enable write\n"); + ret = -EIO; + } + } + + mutex_unlock(&dev->lock); + return ret; +} + +static inline u32 +get_sector_erase_cmd(struct spear_snor_flash *flash, u32 offset) +{ + u32 cmd; + u8 *x = (u8 *)&cmd; + + x[0] = flash->erase_cmd; + x[1] = offset >> 16; + x[2] = offset >> 8; + x[3] = offset; + + return cmd; +} + +/** + * spear_smi_erase_sector - erase one sector of flash + * @dev: structure of SMI information + * @command: erase command to be send + * @bank: bank to which this command needs to be send + * @bytes: size of command + * + * Erase one sector of flash memory at offset ``offset'' which is any + * address within the sector which should be erased. + * Returns 0 if successful, non-zero otherwise. + */ +static int spear_smi_erase_sector(struct spear_smi *dev, + u32 bank, u32 command, u32 bytes) +{ + u32 ctrlreg1 = 0; + int ret; + + ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT); + if (ret) + return ret; + + ret = spear_smi_write_enable(dev, bank); + if (ret) + return ret; + + mutex_lock(&dev->lock); + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + writel((ctrlreg1 | SW_MODE) & ~WB_MODE, dev->io_base + SMI_CR1); + + /* send command in sw mode */ + writel(command, dev->io_base + SMI_TR); + + writel((bank << BANK_SHIFT) | SEND | TFIE | (bytes << TX_LEN_SHIFT), + dev->io_base + SMI_CR2); + + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + if (ret <= 0) { + ret = -EIO; + dev_err(&dev->pdev->dev, "sector erase failed\n"); + } else + ret = 0; /* success */ + + /* restore ctrl regs */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + + mutex_unlock(&dev->lock); + return ret; +} + +/** + * spear_mtd_erase - perform flash erase operation as requested by user + * @mtd: Provides the memory characteristics + * @e_info: Provides the erase information + * + * Erase an address range on the flash chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int spear_mtd_erase(struct mtd_info *mtd, struct erase_info *e_info) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + u32 addr, command, bank; + int len, ret; + + if (!flash || !dev) + return -ENODEV; + + bank = flash->bank; + if (bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + addr = e_info->addr; + len = e_info->len; + + mutex_lock(&flash->lock); + + /* now erase sectors in loop */ + while (len) { + command = get_sector_erase_cmd(flash, addr); + /* preparing the command for flash */ + ret = spear_smi_erase_sector(dev, bank, command, 4); + if (ret) { + e_info->state = MTD_ERASE_FAILED; + mutex_unlock(&flash->lock); + return ret; + } + addr += mtd->erasesize; + len -= mtd->erasesize; + } + + mutex_unlock(&flash->lock); + e_info->state = MTD_ERASE_DONE; + mtd_erase_callback(e_info); + + return 0; +} + +/** + * spear_mtd_read - performs flash read operation as requested by the user + * @mtd: MTD information of the memory bank + * @from: Address from which to start read + * @len: Number of bytes to be read + * @retlen: Fills the Number of bytes actually read + * @buf: Fills this after reading + * + * Read an address range from the flash chip. The address range + * may be any size provided it is within the physical boundaries. + * Returns 0 on success, non zero otherwise + */ +static int spear_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u8 *buf) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + void *src; + u32 ctrlreg1, val; + int ret; + + if (!flash || !dev) + return -ENODEV; + + if (flash->bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + /* select address as per bank number */ + src = flash->base_addr + from; + + mutex_lock(&flash->lock); + + /* wait till previous write/erase is done. */ + ret = spear_smi_wait_till_ready(dev, flash->bank, SMI_MAX_TIME_OUT); + if (ret) { + mutex_unlock(&flash->lock); + return ret; + } + + mutex_lock(&dev->lock); + /* put smi in hw mode not wbt mode */ + ctrlreg1 = val = readl(dev->io_base + SMI_CR1); + val &= ~(SW_MODE | WB_MODE); + if (flash->fast_mode) + val |= FAST_MODE; + + writel(val, dev->io_base + SMI_CR1); + + memcpy_fromio(buf, (u8 *)src, len); + + /* restore ctrl reg1 */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + mutex_unlock(&dev->lock); + + *retlen = len; + mutex_unlock(&flash->lock); + + return 0; +} + +static inline int spear_smi_cpy_toio(struct spear_smi *dev, u32 bank, + void *dest, const void *src, size_t len) +{ + int ret; + u32 ctrlreg1; + + /* wait until finished previous write command. */ + ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT); + if (ret) + return ret; + + /* put smi in write enable */ + ret = spear_smi_write_enable(dev, bank); + if (ret) + return ret; + + /* put smi in hw, write burst mode */ + mutex_lock(&dev->lock); + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + writel((ctrlreg1 | WB_MODE) & ~SW_MODE, dev->io_base + SMI_CR1); + + memcpy_toio(dest, src, len); + + writel(ctrlreg1, dev->io_base + SMI_CR1); + + mutex_unlock(&dev->lock); + return 0; +} + +/** + * spear_mtd_write - performs write operation as requested by the user. + * @mtd: MTD information of the memory bank. + * @to: Address to write. + * @len: Number of bytes to be written. + * @retlen: Number of bytes actually wrote. + * @buf: Buffer from which the data to be taken. + * + * Write an address range to the flash chip. Data must be written in + * flash_page_size chunks. The address range may be any size provided + * it is within the physical boundaries. + * Returns 0 on success, non zero otherwise + */ +static int spear_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u8 *buf) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + void *dest; + u32 page_offset, page_size; + int ret; + + if (!flash || !dev) + return -ENODEV; + + if (flash->bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + /* select address as per bank number */ + dest = flash->base_addr + to; + mutex_lock(&flash->lock); + + page_offset = (u32)to % flash->page_size; + + /* do if all the bytes fit onto one page */ + if (page_offset + len <= flash->page_size) { + ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, len); + if (!ret) + *retlen += len; + } else { + u32 i; + + /* the size of data remaining on the first page */ + page_size = flash->page_size - page_offset; + + ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, + page_size); + if (ret) + goto err_write; + else + *retlen += page_size; + + /* write everything in pagesize chunks */ + for (i = page_size; i < len; i += page_size) { + page_size = len - i; + if (page_size > flash->page_size) + page_size = flash->page_size; + + ret = spear_smi_cpy_toio(dev, flash->bank, dest + i, + buf + i, page_size); + if (ret) + break; + else + *retlen += page_size; + } + } + +err_write: + mutex_unlock(&flash->lock); + + return ret; +} + +/** + * spear_smi_probe_flash - Detects the NOR Flash chip. + * @dev: structure of SMI information. + * @bank: bank on which flash must be probed + * + * This routine will check whether there exists a flash chip on a given memory + * bank ID. + * Return index of the probed flash in flash devices structure + */ +static int spear_smi_probe_flash(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 val = 0; + + ret = spear_smi_wait_till_ready(dev, bank, SMI_PROBE_TIMEOUT); + if (ret) + return ret; + + mutex_lock(&dev->lock); + + dev->status = 0; /* Will be set in interrupt handler */ + /* put smi in sw mode */ + val = readl(dev->io_base + SMI_CR1); + writel(val | SW_MODE, dev->io_base + SMI_CR1); + + /* send readid command in sw mode */ + writel(OPCODE_RDID, dev->io_base + SMI_TR); + + val = (bank << BANK_SHIFT) | SEND | (1 << TX_LEN_SHIFT) | + (3 << RX_LEN_SHIFT) | TFIE; + writel(val, dev->io_base + SMI_CR2); + + /* wait for TFF */ + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + if (ret <= 0) { + ret = -ENODEV; + goto err_probe; + } + + /* get memory chip id */ + val = readl(dev->io_base + SMI_RR); + val &= 0x00ffffff; + ret = get_flash_index(val); + +err_probe: + /* clear sw mode */ + val = readl(dev->io_base + SMI_CR1); + writel(val & ~SW_MODE, dev->io_base + SMI_CR1); + + mutex_unlock(&dev->lock); + return ret; +} + + +#ifdef CONFIG_OF +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *pp = NULL; + const __be32 *addr; + u32 val; + int len; + int i = 0; + + if (!np) + return -ENODEV; + + of_property_read_u32(np, "clock-rate", &val); + pdata->clk_rate = val; + + pdata->board_flash_info = devm_kzalloc(&pdev->dev, + sizeof(*pdata->board_flash_info), + GFP_KERNEL); + + /* Fill structs for each subnode (flash device) */ + while ((pp = of_get_next_child(np, pp))) { + struct spear_smi_flash_info *flash_info; + + flash_info = &pdata->board_flash_info[i]; + pdata->np[i] = pp; + + /* Read base-addr and size from DT */ + addr = of_get_property(pp, "reg", &len); + pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]); + pdata->board_flash_info->size = be32_to_cpup(&addr[1]); + + if (of_get_property(pp, "st,smi-fast-mode", NULL)) + pdata->board_flash_info->fast_mode = 1; + + i++; + } + + pdata->num_flashes = i; + + return 0; +} +#else +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + return -ENOSYS; +} +#endif + +static int spear_smi_setup_banks(struct platform_device *pdev, + u32 bank, struct device_node *np) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + struct mtd_part_parser_data ppdata = {}; + struct spear_smi_flash_info *flash_info; + struct spear_smi_plat_data *pdata; + struct spear_snor_flash *flash; + struct mtd_partition *parts = NULL; + int count = 0; + int flash_index; + int ret = 0; + + pdata = dev_get_platdata(&pdev->dev); + if (bank > pdata->num_flashes - 1) + return -EINVAL; + + flash_info = &pdata->board_flash_info[bank]; + if (!flash_info) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_ATOMIC); + if (!flash) + return -ENOMEM; + flash->bank = bank; + flash->fast_mode = flash_info->fast_mode ? 1 : 0; + mutex_init(&flash->lock); + + /* verify whether nor flash is really present on board */ + flash_index = spear_smi_probe_flash(dev, bank); + if (flash_index < 0) { + dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank); + ret = flash_index; + goto err_probe; + } + /* map the memory for nor flash chip */ + flash->base_addr = ioremap(flash_info->mem_base, flash_info->size); + if (!flash->base_addr) { + ret = -EIO; + goto err_probe; + } + + dev->flash[bank] = flash; + flash->mtd.priv = dev; + + if (flash_info->name) + flash->mtd.name = flash_info->name; + else + flash->mtd.name = flash_devices[flash_index].name; + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.writesize = 1; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.size = flash_info->size; + flash->mtd.erasesize = flash_devices[flash_index].sectorsize; + flash->page_size = flash_devices[flash_index].pagesize; + flash->mtd.writebufsize = flash->page_size; + flash->erase_cmd = flash_devices[flash_index].erase_cmd; + flash->mtd._erase = spear_mtd_erase; + flash->mtd._read = spear_mtd_read; + flash->mtd._write = spear_mtd_write; + flash->dev_id = flash_devices[flash_index].device_id; + + dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n", + flash->mtd.name, flash->mtd.size, + flash->mtd.size / (1024 * 1024)); + + dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n", + flash->mtd.erasesize, flash->mtd.erasesize / 1024); + +#ifndef CONFIG_OF + if (flash_info->partitions) { + parts = flash_info->partitions; + count = flash_info->nr_partitions; + } +#endif + ppdata.of_node = np; + + ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts, + count); + if (ret) { + dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret); + goto err_map; + } + + return 0; + +err_map: + iounmap(flash->base_addr); + +err_probe: + kfree(flash); + return ret; +} + +/** + * spear_smi_probe - Entry routine + * @pdev: platform device structure + * + * This is the first routine which gets invoked during booting and does all + * initialization/allocation work. The routine looks for available memory banks, + * and do proper init for any found one. + * Returns 0 on success, non zero otherwise + */ +static int __devinit spear_smi_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct spear_smi_plat_data *pdata = NULL; + struct spear_smi *dev; + struct resource *smi_base; + int irq, ret = 0; + int i; + + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: ERROR: no memory", __func__); + ret = -ENOMEM; + goto err; + } + pdev->dev.platform_data = pdata; + ret = spear_smi_probe_config_dt(pdev, np); + if (ret) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + } else { + pdata = dev_get_platdata(&pdev->dev); + if (pdata < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + } + + smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!smi_base) { + ret = -ENODEV; + dev_err(&pdev->dev, "invalid smi base address\n"); + goto err; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "invalid smi irq\n"); + goto err; + } + + dev = kzalloc(sizeof(*dev), GFP_ATOMIC); + if (!dev) { + ret = -ENOMEM; + dev_err(&pdev->dev, "mem alloc fail\n"); + goto err; + } + + smi_base = request_mem_region(smi_base->start, resource_size(smi_base), + pdev->name); + if (!smi_base) { + ret = -EBUSY; + dev_err(&pdev->dev, "request mem region fail\n"); + goto err_mem; + } + + dev->io_base = ioremap(smi_base->start, resource_size(smi_base)); + if (!dev->io_base) { + ret = -EIO; + dev_err(&pdev->dev, "ioremap fail\n"); + goto err_ioremap; + } + + dev->pdev = pdev; + dev->clk_rate = pdata->clk_rate; + + if (dev->clk_rate < 0 || dev->clk_rate > SMI_MAX_CLOCK_FREQ) + dev->clk_rate = SMI_MAX_CLOCK_FREQ; + + dev->num_flashes = pdata->num_flashes; + + if (dev->num_flashes > MAX_NUM_FLASH_CHIP) { + dev_err(&pdev->dev, "exceeding max number of flashes\n"); + dev->num_flashes = MAX_NUM_FLASH_CHIP; + } + + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) { + ret = PTR_ERR(dev->clk); + goto err_clk; + } + + ret = clk_enable(dev->clk); + if (ret) + goto err_clk_enable; + + ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev); + if (ret) { + dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n"); + goto err_irq; + } + + mutex_init(&dev->lock); + init_waitqueue_head(&dev->cmd_complete); + spear_smi_hw_init(dev); + platform_set_drvdata(pdev, dev); + + /* loop for each serial nor-flash which is connected to smi */ + for (i = 0; i < dev->num_flashes; i++) { + ret = spear_smi_setup_banks(pdev, i, pdata->np[i]); + if (ret) { + dev_err(&dev->pdev->dev, "bank setup failed\n"); + goto err_bank_setup; + } + } + + return 0; + +err_bank_setup: + free_irq(irq, dev); + platform_set_drvdata(pdev, NULL); +err_irq: + clk_disable(dev->clk); +err_clk_enable: + clk_put(dev->clk); +err_clk: + iounmap(dev->io_base); +err_ioremap: + release_mem_region(smi_base->start, resource_size(smi_base)); +err_mem: + kfree(dev); +err: + return ret; +} + +/** + * spear_smi_remove - Exit routine + * @pdev: platform device structure + * + * free all allocations and delete the partitions. + */ +static int __devexit spear_smi_remove(struct platform_device *pdev) +{ + struct spear_smi *dev; + struct spear_smi_plat_data *pdata; + struct spear_snor_flash *flash; + struct resource *smi_base; + int ret; + int i, irq; + + dev = platform_get_drvdata(pdev); + if (!dev) { + dev_err(&pdev->dev, "dev is null\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + + /* clean up for all nor flash */ + for (i = 0; i < dev->num_flashes; i++) { + flash = dev->flash[i]; + if (!flash) + continue; + + /* clean up mtd stuff */ + ret = mtd_device_unregister(&flash->mtd); + if (ret) + dev_err(&pdev->dev, "error removing mtd\n"); + + iounmap(flash->base_addr); + kfree(flash); + } + + irq = platform_get_irq(pdev, 0); + free_irq(irq, dev); + + clk_disable(dev->clk); + clk_put(dev->clk); + iounmap(dev->io_base); + kfree(dev); + + smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(smi_base->start, resource_size(smi_base)); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +int spear_smi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + + if (dev && dev->clk) + clk_disable(dev->clk); + + return 0; +} + +int spear_smi_resume(struct platform_device *pdev) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + int ret = -EPERM; + + if (dev && dev->clk) + ret = clk_enable(dev->clk); + + if (!ret) + spear_smi_hw_init(dev); + return ret; +} + +#ifdef CONFIG_OF +static const struct of_device_id spear_smi_id_table[] = { + { .compatible = "st,spear600-smi" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_smi_id_table); +#endif + +static struct platform_driver spear_smi_driver = { + .driver = { + .name = "smi", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear_smi_id_table), + }, + .probe = spear_smi_probe, + .remove = __devexit_p(spear_smi_remove), + .suspend = spear_smi_suspend, + .resume = spear_smi_resume, +}; + +static int spear_smi_init(void) +{ + return platform_driver_register(&spear_smi_driver); +} +module_init(spear_smi_init); + +static void spear_smi_exit(void) +{ + platform_driver_unregister(&spear_smi_driver); +} +module_exit(spear_smi_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>"); +MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips"); diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index 5fc1983..ab8a2f4 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -175,9 +175,6 @@ static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) int err; /* Sanity checks */ - if (instr->addr + instr->len > flash->mtd.size) - return -EINVAL; - if ((uint32_t)instr->len % mtd->erasesize) return -EINVAL; @@ -223,16 +220,6 @@ static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, unsigned char command[4]; int ret; - /* Sanity checking */ - if (len == 0) - return 0; - - if (from + len > flash->mtd.size) - return -EINVAL; - - if (retlen) - *retlen = 0; - spi_message_init(&message); memset(&transfer, 0, sizeof(transfer)); @@ -274,13 +261,6 @@ static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, int i, j, ret, bytes, copied = 0; unsigned char command[5]; - /* Sanity checks */ - if (!len) - return 0; - - if (to + len > flash->mtd.size) - return -EINVAL; - if ((uint32_t)to % mtd->writesize) return -EINVAL; @@ -402,10 +382,11 @@ static int __devinit sst25l_probe(struct spi_device *spi) flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.erasesize = flash_info->erase_size; flash->mtd.writesize = flash_info->page_size; + flash->mtd.writebufsize = flash_info->page_size; flash->mtd.size = flash_info->page_size * flash_info->nr_pages; - flash->mtd.erase = sst25l_erase; - flash->mtd.read = sst25l_read; - flash->mtd.write = sst25l_write; + flash->mtd._erase = sst25l_erase; + flash->mtd._read = sst25l_read; + flash->mtd._write = sst25l_write; dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, (long long)flash->mtd.size >> 10); @@ -418,9 +399,9 @@ static int __devinit sst25l_probe(struct spi_device *spi) flash->mtd.numeraseregions); - ret = mtd_device_parse_register(&flash->mtd, NULL, 0, - data ? data->parts : NULL, - data ? data->nr_parts : 0); + ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, + data ? data->parts : NULL, + data ? data->nr_parts : 0); if (ret) { kfree(flash); dev_set_drvdata(&spi->dev, NULL); @@ -450,18 +431,7 @@ static struct spi_driver sst25l_driver = { .remove = __devexit_p(sst25l_remove), }; -static int __init sst25l_init(void) -{ - return spi_register_driver(&sst25l_driver); -} - -static void __exit sst25l_exit(void) -{ - spi_unregister_driver(&sst25l_driver); -} - -module_init(sst25l_init); -module_exit(sst25l_exit); +module_spi_driver(sst25l_driver); MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, " diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 28646c9..3af3514 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -56,7 +56,7 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) if (memcmp(mtd->name, "DiskOnChip", 10)) return; - if (!mtd->block_isbad) { + if (!mtd->_block_isbad) { printk(KERN_ERR "INFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n" "Please use the new diskonchip driver under the NAND subsystem.\n"); diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index 536bbce..d3cfe26b 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -40,7 +40,7 @@ static int lpddr_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); static int lpddr_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len, size_t *retlen, void **mtdbuf, resource_size_t *phys); -static void lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len); +static int lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len); static int get_chip(struct map_info *map, struct flchip *chip, int mode); static int chip_ready(struct map_info *map, struct flchip *chip, int mode); static void put_chip(struct map_info *map, struct flchip *chip); @@ -63,18 +63,18 @@ struct mtd_info *lpddr_cmdset(struct map_info *map) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->read = lpddr_read; + mtd->_read = lpddr_read; mtd->type = MTD_NORFLASH; mtd->flags = MTD_CAP_NORFLASH; mtd->flags &= ~MTD_BIT_WRITEABLE; - mtd->erase = lpddr_erase; - mtd->write = lpddr_write_buffers; - mtd->writev = lpddr_writev; - mtd->lock = lpddr_lock; - mtd->unlock = lpddr_unlock; + mtd->_erase = lpddr_erase; + mtd->_write = lpddr_write_buffers; + mtd->_writev = lpddr_writev; + mtd->_lock = lpddr_lock; + mtd->_unlock = lpddr_unlock; if (map_is_linear(map)) { - mtd->point = lpddr_point; - mtd->unpoint = lpddr_unpoint; + mtd->_point = lpddr_point; + mtd->_unpoint = lpddr_unpoint; } mtd->size = 1 << lpddr->qinfo->DevSizeShift; mtd->erasesize = 1 << lpddr->qinfo->UniformBlockSizeShift; @@ -530,14 +530,12 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len, struct flchip *chip = &lpddr->chips[chipnum]; int ret = 0; - if (!map->virt || (adr + len > mtd->size)) + if (!map->virt) return -EINVAL; /* ofs: offset within the first chip that the first read should start */ ofs = adr - (chipnum << lpddr->chipshift); - *mtdbuf = (void *)map->virt + chip->start + ofs; - *retlen = 0; while (len) { unsigned long thislen; @@ -575,11 +573,11 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len, return 0; } -static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) +static int lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) { struct map_info *map = mtd->priv; struct lpddr_private *lpddr = map->fldrv_priv; - int chipnum = adr >> lpddr->chipshift; + int chipnum = adr >> lpddr->chipshift, err = 0; unsigned long ofs; /* ofs: offset within the first chip that the first read should start */ @@ -603,9 +601,11 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) chip->ref_point_counter--; if (chip->ref_point_counter == 0) chip->state = FL_READY; - } else + } else { printk(KERN_WARNING "%s: Warning: unpoint called on non" "pointed region\n", map->name); + err = -EINVAL; + } put_chip(map, chip); mutex_unlock(&chip->mutex); @@ -614,6 +614,8 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) ofs = 0; chipnum++; } + + return err; } static int lpddr_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, @@ -637,13 +639,11 @@ static int lpddr_writev(struct mtd_info *mtd, const struct kvec *vecs, int chipnum; unsigned long ofs, vec_seek, i; int wbufsize = 1 << lpddr->qinfo->BufSizeShift; - size_t len = 0; for (i = 0; i < count; i++) len += vecs[i].iov_len; - *retlen = 0; if (!len) return 0; @@ -688,9 +688,6 @@ static int lpddr_erase(struct mtd_info *mtd, struct erase_info *instr) ofs = instr->addr; len = instr->len; - if (ofs > mtd->size || (len + ofs) > mtd->size) - return -EINVAL; - while (len > 0) { ret = do_erase_oneblock(mtd, ofs); if (ret) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 6c5c431..8af67cf 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -1,5 +1,6 @@ menu "Mapping drivers for chip access" depends on MTD!=n + depends on HAS_IOMEM config MTD_COMPLEX_MAPPINGS bool "Support non-linear mappings of flash chips" diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 650126c..ef5cde8 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -164,8 +164,8 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev) return -ENXIO; } - mtd_device_parse_register(state->mtd, part_probe_types, 0, - pdata->parts, pdata->nr_parts); + mtd_device_parse_register(state->mtd, part_probe_types, NULL, + pdata->parts, pdata->nr_parts); platform_set_drvdata(pdev, state); diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c index f43b365..080f060 100644 --- a/drivers/mtd/maps/dc21285.c +++ b/drivers/mtd/maps/dc21285.c @@ -196,7 +196,7 @@ static int __init init_dc21285(void) dc21285_mtd->owner = THIS_MODULE; - mtd_device_parse_register(dc21285_mtd, probes, 0, NULL, 0); + mtd_device_parse_register(dc21285_mtd, probes, NULL, NULL, 0); if(machine_is_ebsa285()) { /* diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c index 33cce89..e4de96b 100644 --- a/drivers/mtd/maps/gpio-addr-flash.c +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -252,8 +252,8 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev) } - mtd_device_parse_register(state->mtd, part_probe_types, 0, - pdata->parts, pdata->nr_parts); + mtd_device_parse_register(state->mtd, part_probe_types, NULL, + pdata->parts, pdata->nr_parts); return 0; } diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c index 49c1418..8ed6cb4 100644 --- a/drivers/mtd/maps/h720x-flash.c +++ b/drivers/mtd/maps/h720x-flash.c @@ -85,8 +85,8 @@ static int __init h720x_mtd_init(void) if (mymtd) { mymtd->owner = THIS_MODULE; - mtd_device_parse_register(mymtd, NULL, 0, - h720x_partitions, NUM_PARTITIONS); + mtd_device_parse_register(mymtd, NULL, NULL, + h720x_partitions, NUM_PARTITIONS); return 0; } diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c index f47aedb..834a06c 100644 --- a/drivers/mtd/maps/impa7.c +++ b/drivers/mtd/maps/impa7.c @@ -91,7 +91,7 @@ static int __init init_impa7(void) if (impa7_mtd[i]) { impa7_mtd[i]->owner = THIS_MODULE; devicesfound++; - mtd_device_parse_register(impa7_mtd[i], NULL, 0, + mtd_device_parse_register(impa7_mtd[i], NULL, NULL, partitions, ARRAY_SIZE(partitions)); } diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c index 08c2396..92e1f41 100644 --- a/drivers/mtd/maps/intel_vr_nor.c +++ b/drivers/mtd/maps/intel_vr_nor.c @@ -72,7 +72,7 @@ static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p) { /* register the flash bank */ /* partition the flash bank */ - return mtd_device_parse_register(p->info, NULL, 0, NULL, 0); + return mtd_device_parse_register(p->info, NULL, NULL, NULL, 0); } static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p) diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index fc7d4d0..4a41ced 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -226,7 +226,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) } info->mtd->owner = THIS_MODULE; - err = mtd_device_parse_register(info->mtd, probes, 0, NULL, 0); + err = mtd_device_parse_register(info->mtd, probes, NULL, NULL, 0); if (err) goto Error; diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 8b54101..e864fc6 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -182,6 +182,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev) { struct flash_platform_data *plat = dev->dev.platform_data; struct ixp4xx_flash_info *info; + struct mtd_part_parser_data ppdata = { + .origin = dev->resource->start, + }; int err = -1; if (!plat) @@ -247,7 +250,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev) /* Use the fast version */ info->map.write = ixp4xx_write16; - err = mtd_device_parse_register(info->mtd, probes, dev->resource->start, + err = mtd_device_parse_register(info->mtd, probes, &ppdata, plat->parts, plat->nr_parts); if (err) { printk(KERN_ERR "Could not parse partitions\n"); diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c index dd0360b..74bd98e 100644 --- a/drivers/mtd/maps/l440gx.c +++ b/drivers/mtd/maps/l440gx.c @@ -27,17 +27,21 @@ static struct mtd_info *mymtd; /* Is this really the vpp port? */ +static DEFINE_SPINLOCK(l440gx_vpp_lock); +static int l440gx_vpp_refcnt; static void l440gx_set_vpp(struct map_info *map, int vpp) { - unsigned long l; + unsigned long flags; - l = inl(VPP_PORT); + spin_lock_irqsave(&l440gx_vpp_lock, flags); if (vpp) { - l |= 1; + if (++l440gx_vpp_refcnt == 1) /* first nested 'on' */ + outl(inl(VPP_PORT) | 1, VPP_PORT); } else { - l &= ~1; + if (--l440gx_vpp_refcnt == 0) /* last nested 'off' */ + outl(inl(VPP_PORT) & ~1, VPP_PORT); } - outl(l, VPP_PORT); + spin_unlock_irqrestore(&l440gx_vpp_lock, flags); } static struct map_info l440gx_map = { diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c index 7b889de..b5401e3 100644 --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c @@ -45,6 +45,7 @@ struct ltq_mtd { }; static char ltq_map_name[] = "ltq_nor"; +static const char *ltq_probe_types[] __devinitconst = { "cmdlinepart", NULL }; static map_word ltq_read16(struct map_info *map, unsigned long adr) @@ -168,8 +169,9 @@ ltq_mtd_probe(struct platform_device *pdev) cfi->addr_unlock1 ^= 1; cfi->addr_unlock2 ^= 1; - err = mtd_device_parse_register(ltq_mtd->mtd, NULL, 0, - ltq_mtd_data->parts, ltq_mtd_data->nr_parts); + err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types, NULL, + ltq_mtd_data->parts, + ltq_mtd_data->nr_parts); if (err) { dev_err(&pdev->dev, "failed to add partitions\n"); goto err_destroy; diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c index 8fed58e..3c7ad17 100644 --- a/drivers/mtd/maps/latch-addr-flash.c +++ b/drivers/mtd/maps/latch-addr-flash.c @@ -199,8 +199,9 @@ static int __devinit latch_addr_flash_probe(struct platform_device *dev) } info->mtd->owner = THIS_MODULE; - mtd_device_parse_register(info->mtd, NULL, 0, - latch_addr_data->parts, latch_addr_data->nr_parts); + mtd_device_parse_register(info->mtd, NULL, NULL, + latch_addr_data->parts, + latch_addr_data->nr_parts); return 0; iounmap: diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index e8e9fec..a3cfad3 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -14,7 +14,6 @@ #include <linux/timer.h> #include <linux/init.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -295,13 +294,24 @@ static void pcmcia_copy_to(struct map_info *map, unsigned long to, const void *f } +static DEFINE_SPINLOCK(pcmcia_vpp_lock); +static int pcmcia_vpp_refcnt; static void pcmciamtd_set_vpp(struct map_info *map, int on) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; struct pcmcia_device *link = dev->p_dev; + unsigned long flags; pr_debug("dev = %p on = %d vpp = %d\n\n", dev, on, dev->vpp); - pcmcia_fixup_vpp(link, on ? dev->vpp : 0); + spin_lock_irqsave(&pcmcia_vpp_lock, flags); + if (on) { + if (++pcmcia_vpp_refcnt == 1) /* first nested 'on' */ + pcmcia_fixup_vpp(link, dev->vpp); + } else { + if (--pcmcia_vpp_refcnt == 0) /* last nested 'off' */ + pcmcia_fixup_vpp(link, 0); + } + spin_unlock_irqrestore(&pcmcia_vpp_lock, flags); } diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index abc5626..21b0b71 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -27,6 +27,8 @@ struct physmap_flash_info { struct mtd_info *mtd[MAX_RESOURCES]; struct mtd_info *cmtd; struct map_info map[MAX_RESOURCES]; + spinlock_t vpp_lock; + int vpp_refcnt; }; static int physmap_flash_remove(struct platform_device *dev) @@ -63,12 +65,26 @@ static void physmap_set_vpp(struct map_info *map, int state) { struct platform_device *pdev; struct physmap_flash_data *physmap_data; + struct physmap_flash_info *info; + unsigned long flags; pdev = (struct platform_device *)map->map_priv_1; physmap_data = pdev->dev.platform_data; - if (physmap_data->set_vpp) - physmap_data->set_vpp(pdev, state); + if (!physmap_data->set_vpp) + return; + + info = platform_get_drvdata(pdev); + + spin_lock_irqsave(&info->vpp_lock, flags); + if (state) { + if (++info->vpp_refcnt == 1) /* first nested 'on' */ + physmap_data->set_vpp(pdev, 1); + } else { + if (--info->vpp_refcnt == 0) /* last nested 'off' */ + physmap_data->set_vpp(pdev, 0); + } + spin_unlock_irqrestore(&info->vpp_lock, flags); } static const char *rom_probe_types[] = { @@ -172,9 +188,11 @@ static int physmap_flash_probe(struct platform_device *dev) if (err) goto err_out; + spin_lock_init(&info->vpp_lock); + part_types = physmap_data->part_probe_types ? : part_probe_types; - mtd_device_parse_register(info->cmtd, part_types, 0, + mtd_device_parse_register(info->cmtd, part_types, NULL, physmap_data->parts, physmap_data->nr_parts); return 0; diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 45876d0..891558d 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -222,8 +222,9 @@ static int platram_probe(struct platform_device *pdev) /* check to see if there are any available partitions, or wether * to add this device whole */ - err = mtd_device_parse_register(info->mtd, pdata->probes, 0, - pdata->partitions, pdata->nr_partitions); + err = mtd_device_parse_register(info->mtd, pdata->probes, NULL, + pdata->partitions, + pdata->nr_partitions); if (!err) dev_info(&pdev->dev, "registered mtd device\n"); diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 436d121..81884c2 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -98,7 +98,8 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev) } info->mtd->owner = THIS_MODULE; - mtd_device_parse_register(info->mtd, probes, 0, flash->parts, flash->nr_parts); + mtd_device_parse_register(info->mtd, probes, NULL, flash->parts, + flash->nr_parts); platform_set_drvdata(pdev, info); return 0; diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c index 3da63fc..6f52e1f 100644 --- a/drivers/mtd/maps/rbtx4939-flash.c +++ b/drivers/mtd/maps/rbtx4939-flash.c @@ -102,8 +102,8 @@ static int rbtx4939_flash_probe(struct platform_device *dev) info->mtd->owner = THIS_MODULE; if (err) goto err_out; - err = mtd_device_parse_register(info->mtd, NULL, 0, - pdata->parts, pdata->nr_parts); + err = mtd_device_parse_register(info->mtd, NULL, NULL, pdata->parts, + pdata->nr_parts); if (err) goto err_out; diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 5028219..a675bdb 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -23,106 +23,6 @@ #include <asm/sizes.h> #include <asm/mach/flash.h> -#if 0 -/* - * This is here for documentation purposes only - until these people - * submit their machine types. It will be gone January 2005. - */ -static struct mtd_partition consus_partitions[] = { - { - .name = "Consus boot firmware", - .offset = 0, - .size = 0x00040000, - .mask_flags = MTD_WRITABLE, /* force read-only */ - }, { - .name = "Consus kernel", - .offset = 0x00040000, - .size = 0x00100000, - .mask_flags = 0, - }, { - .name = "Consus disk", - .offset = 0x00140000, - /* The rest (up to 16M) for jffs. We could put 0 and - make it find the size automatically, but right now - i have 32 megs. jffs will use all 32 megs if given - the chance, and this leads to horrible problems - when you try to re-flash the image because blob - won't erase the whole partition. */ - .size = 0x01000000 - 0x00140000, - .mask_flags = 0, - }, { - /* this disk is a secondary disk, which can be used as - needed, for simplicity, make it the size of the other - consus partition, although realistically it could be - the remainder of the disk (depending on the file - system used) */ - .name = "Consus disk2", - .offset = 0x01000000, - .size = 0x01000000 - 0x00140000, - .mask_flags = 0, - } -}; - -/* Frodo has 2 x 16M 28F128J3A flash chips in bank 0: */ -static struct mtd_partition frodo_partitions[] = -{ - { - .name = "bootloader", - .size = 0x00040000, - .offset = 0x00000000, - .mask_flags = MTD_WRITEABLE - }, { - .name = "bootloader params", - .size = 0x00040000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - }, { - .name = "kernel", - .size = 0x00100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - }, { - .name = "ramdisk", - .size = 0x00400000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - }, { - .name = "file system", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND - } -}; - -static struct mtd_partition jornada56x_partitions[] = { - { - .name = "bootldr", - .size = 0x00040000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static void jornada56x_set_vpp(int vpp) -{ - if (vpp) - GPSR = GPIO_GPIO26; - else - GPCR = GPIO_GPIO26; - GPDR |= GPIO_GPIO26; -} - -/* - * Machine Phys Size set_vpp - * Consus : SA1100_CS0_PHYS SZ_32M - * Frodo : SA1100_CS0_PHYS SZ_32M - * Jornada56x: SA1100_CS0_PHYS SZ_32M jornada56x_set_vpp - */ -#endif - struct sa_subdev_info { char name[16]; struct map_info map; @@ -136,10 +36,22 @@ struct sa_info { struct sa_subdev_info subdev[0]; }; +static DEFINE_SPINLOCK(sa1100_vpp_lock); +static int sa1100_vpp_refcnt; static void sa1100_set_vpp(struct map_info *map, int on) { struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map); - subdev->plat->set_vpp(on); + unsigned long flags; + + spin_lock_irqsave(&sa1100_vpp_lock, flags); + if (on) { + if (++sa1100_vpp_refcnt == 1) /* first nested 'on' */ + subdev->plat->set_vpp(1); + } else { + if (--sa1100_vpp_refcnt == 0) /* last nested 'off' */ + subdev->plat->set_vpp(0); + } + spin_unlock_irqrestore(&sa1100_vpp_lock, flags); } static void sa1100_destroy_subdev(struct sa_subdev_info *subdev) @@ -352,8 +264,8 @@ static int __devinit sa1100_mtd_probe(struct platform_device *pdev) /* * Partition selection stuff. */ - mtd_device_parse_register(info->mtd, part_probes, 0, - plat->parts, plat->nr_parts); + mtd_device_parse_register(info->mtd, part_probes, NULL, plat->parts, + plat->nr_parts); platform_set_drvdata(pdev, info); err = 0; @@ -373,21 +285,9 @@ static int __exit sa1100_mtd_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static void sa1100_mtd_shutdown(struct platform_device *dev) -{ - struct sa_info *info = platform_get_drvdata(dev); - if (info && mtd_suspend(info->mtd) == 0) - mtd_resume(info->mtd); -} -#else -#define sa1100_mtd_shutdown NULL -#endif - static struct platform_driver sa1100_mtd_driver = { .probe = sa1100_mtd_probe, .remove = __exit_p(sa1100_mtd_remove), - .shutdown = sa1100_mtd_shutdown, .driver = { .name = "sa1100-mtd", .owner = THIS_MODULE, diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c index 496c407..9d900ad 100644 --- a/drivers/mtd/maps/solutionengine.c +++ b/drivers/mtd/maps/solutionengine.c @@ -92,8 +92,8 @@ static int __init init_soleng_maps(void) mtd_device_register(eprom_mtd, NULL, 0); } - mtd_device_parse_register(flash_mtd, probes, 0, - superh_se_partitions, NUM_PARTITIONS); + mtd_device_parse_register(flash_mtd, probes, NULL, + superh_se_partitions, NUM_PARTITIONS); return 0; } diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 6793074..cfff454 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -85,7 +85,7 @@ static int __init uclinux_mtd_init(void) } mtd->owner = THIS_MODULE; - mtd->point = uclinux_point; + mtd->_point = uclinux_point; mtd->priv = mapp; uclinux_ram_mtdinfo = mtd; diff --git a/drivers/mtd/maps/vmu-flash.c b/drivers/mtd/maps/vmu-flash.c index 3a04b07..2e2b094 100644 --- a/drivers/mtd/maps/vmu-flash.c +++ b/drivers/mtd/maps/vmu-flash.c @@ -360,9 +360,6 @@ static int vmu_flash_read(struct mtd_info *mtd, loff_t from, size_t len, int index = 0, retval, partition, leftover, numblocks; unsigned char cx; - if (len < 1) - return -EIO; - mpart = mtd->priv; mdev = mpart->mdev; partition = mpart->partition; @@ -434,11 +431,6 @@ static int vmu_flash_write(struct mtd_info *mtd, loff_t to, size_t len, partition = mpart->partition; card = maple_get_drvdata(mdev); - /* simple sanity checks */ - if (len < 1) { - error = -EIO; - goto failed; - } numblocks = card->parts[partition].numblocks; if (to + len > numblocks * card->blocklen) len = numblocks * card->blocklen - to; @@ -544,9 +536,9 @@ static void vmu_queryblocks(struct mapleq *mq) mtd_cur->flags = MTD_WRITEABLE|MTD_NO_ERASE; mtd_cur->size = part_cur->numblocks * card->blocklen; mtd_cur->erasesize = card->blocklen; - mtd_cur->write = vmu_flash_write; - mtd_cur->read = vmu_flash_read; - mtd_cur->sync = vmu_flash_sync; + mtd_cur->_write = vmu_flash_write; + mtd_cur->_read = vmu_flash_read; + mtd_cur->_sync = vmu_flash_sync; mtd_cur->writesize = card->blocklen; mpart = kmalloc(sizeof(struct mdev_part), GFP_KERNEL); diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c index aa7e0cb..71b0ba7 100644 --- a/drivers/mtd/maps/wr_sbc82xx_flash.c +++ b/drivers/mtd/maps/wr_sbc82xx_flash.c @@ -142,7 +142,7 @@ static int __init init_sbc82xx_flash(void) nr_parts = ARRAY_SIZE(smallflash_parts); } - mtd_device_parse_register(sbcmtd[i], part_probes, 0, + mtd_device_parse_register(sbcmtd[i], part_probes, NULL, defparts, nr_parts); } return 0; diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 424ca5f..f1f0671 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -233,6 +233,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode) ret = __get_mtd_device(dev->mtd); if (ret) goto error_release; + dev->file_mode = mode; unlock: dev->open++; diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index af65912..6c6d807 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -321,8 +321,12 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd) mutex_unlock(&mtdblk->cache_mutex); if (!--mtdblk->count) { - /* It was the last usage. Free the cache */ - mtd_sync(mbd->mtd); + /* + * It was the last usage. Free the cache, but only sync if + * opened for writing. + */ + if (mbd->file_mode & FMODE_WRITE) + mtd_sync(mbd->mtd); vfree(mtdblk->cache_data); } diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index c57ae92..94eb05b 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -39,7 +39,6 @@ #include <asm/uaccess.h> static DEFINE_MUTEX(mtd_mutex); -static struct vfsmount *mtd_inode_mnt __read_mostly; /* * Data structure to hold the pointer to the mtd device as well @@ -75,7 +74,9 @@ static loff_t mtdchar_lseek(struct file *file, loff_t offset, int orig) return -EINVAL; } - +static int count; +static struct vfsmount *mnt; +static struct file_system_type mtd_inodefs_type; static int mtdchar_open(struct inode *inode, struct file *file) { @@ -92,6 +93,10 @@ static int mtdchar_open(struct inode *inode, struct file *file) if ((file->f_mode & FMODE_WRITE) && (minor & 1)) return -EACCES; + ret = simple_pin_fs(&mtd_inodefs_type, &mnt, &count); + if (ret) + return ret; + mutex_lock(&mtd_mutex); mtd = get_mtd_device(NULL, devnum); @@ -106,7 +111,7 @@ static int mtdchar_open(struct inode *inode, struct file *file) goto out; } - mtd_ino = iget_locked(mtd_inode_mnt->mnt_sb, devnum); + mtd_ino = iget_locked(mnt->mnt_sb, devnum); if (!mtd_ino) { put_mtd_device(mtd); ret = -ENOMEM; @@ -141,6 +146,7 @@ static int mtdchar_open(struct inode *inode, struct file *file) out: mutex_unlock(&mtd_mutex); + simple_release_fs(&mnt, &count); return ret; } /* mtdchar_open */ @@ -162,6 +168,7 @@ static int mtdchar_close(struct inode *inode, struct file *file) put_mtd_device(mtd); file->private_data = NULL; kfree(mfi); + simple_release_fs(&mnt, &count); return 0; } /* mtdchar_close */ @@ -405,7 +412,7 @@ static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd, if (length > 4096) return -EINVAL; - if (!mtd->write_oob) + if (!mtd->_write_oob) ret = -EOPNOTSUPP; else ret = access_ok(VERIFY_READ, ptr, length) ? 0 : -EFAULT; @@ -576,7 +583,7 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, !access_ok(VERIFY_READ, req.usr_data, req.len) || !access_ok(VERIFY_READ, req.usr_oob, req.ooblen)) return -EFAULT; - if (!mtd->write_oob) + if (!mtd->_write_oob) return -EOPNOTSUPP; ops.mode = req.mode; @@ -1175,10 +1182,15 @@ static const struct file_operations mtd_fops = { #endif }; +static const struct super_operations mtd_ops = { + .drop_inode = generic_delete_inode, + .statfs = simple_statfs, +}; + static struct dentry *mtd_inodefs_mount(struct file_system_type *fs_type, int flags, const char *dev_name, void *data) { - return mount_pseudo(fs_type, "mtd_inode:", NULL, NULL, MTD_INODE_FS_MAGIC); + return mount_pseudo(fs_type, "mtd_inode:", &mtd_ops, NULL, MTD_INODE_FS_MAGIC); } static struct file_system_type mtd_inodefs_type = { @@ -1187,26 +1199,6 @@ static struct file_system_type mtd_inodefs_type = { .kill_sb = kill_anon_super, }; -static void mtdchar_notify_add(struct mtd_info *mtd) -{ -} - -static void mtdchar_notify_remove(struct mtd_info *mtd) -{ - struct inode *mtd_ino = ilookup(mtd_inode_mnt->mnt_sb, mtd->index); - - if (mtd_ino) { - /* Destroy the inode if it exists */ - clear_nlink(mtd_ino); - iput(mtd_ino); - } -} - -static struct mtd_notifier mtdchar_notifier = { - .add = mtdchar_notify_add, - .remove = mtdchar_notify_remove, -}; - static int __init init_mtdchar(void) { int ret; @@ -1224,19 +1216,8 @@ static int __init init_mtdchar(void) pr_notice("Can't register mtd_inodefs filesystem: %d\n", ret); goto err_unregister_chdev; } - - mtd_inode_mnt = kern_mount(&mtd_inodefs_type); - if (IS_ERR(mtd_inode_mnt)) { - ret = PTR_ERR(mtd_inode_mnt); - pr_notice("Error mounting mtd_inodefs filesystem: %d\n", ret); - goto err_unregister_filesystem; - } - register_mtd_user(&mtdchar_notifier); - return ret; -err_unregister_filesystem: - unregister_filesystem(&mtd_inodefs_type); err_unregister_chdev: __unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd"); return ret; @@ -1244,8 +1225,6 @@ err_unregister_chdev: static void __exit cleanup_mtdchar(void) { - unregister_mtd_user(&mtdchar_notifier); - kern_unmount(mtd_inode_mnt); unregister_filesystem(&mtd_inodefs_type); __unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd"); } diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 1ed5103..b900056 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -72,8 +72,6 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len, int ret = 0, err; int i; - *retlen = 0; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; size_t size, retsize; @@ -126,11 +124,6 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len, int err = -EINVAL; int i; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - - *retlen = 0; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; size_t size, retsize; @@ -145,11 +138,7 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len, else size = len; - if (!(subdev->flags & MTD_WRITEABLE)) - err = -EROFS; - else - err = mtd_write(subdev, to, size, &retsize, buf); - + err = mtd_write(subdev, to, size, &retsize, buf); if (err) break; @@ -176,19 +165,10 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs, int i; int err = -EINVAL; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - - *retlen = 0; - /* Calculate total length of data */ for (i = 0; i < count; i++) total_len += vecs[i].iov_len; - /* Do not allow write past end of device */ - if ((to + total_len) > mtd->size) - return -EINVAL; - /* Check alignment */ if (mtd->writesize > 1) { uint64_t __to = to; @@ -224,12 +204,8 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs, old_iov_len = vecs_copy[entry_high].iov_len; vecs_copy[entry_high].iov_len = size; - if (!(subdev->flags & MTD_WRITEABLE)) - err = -EROFS; - else - err = mtd_writev(subdev, &vecs_copy[entry_low], - entry_high - entry_low + 1, to, - &retsize); + err = mtd_writev(subdev, &vecs_copy[entry_low], + entry_high - entry_low + 1, to, &retsize); vecs_copy[entry_high].iov_len = old_iov_len - size; vecs_copy[entry_high].iov_base += size; @@ -403,15 +379,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) uint64_t length, offset = 0; struct erase_info *erase; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - - if (instr->addr > concat->mtd.size) - return -EINVAL; - - if (instr->len + instr->addr > concat->mtd.size) - return -EINVAL; - /* * Check for proper erase block alignment of the to-be-erased area. * It is easier to do this based on the super device's erase @@ -459,8 +426,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) return -EINVAL; } - instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; - /* make a local copy of instr to avoid modifying the caller's struct */ erase = kmalloc(sizeof (struct erase_info), GFP_KERNEL); @@ -499,10 +464,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) else erase->len = length; - if (!(subdev->flags & MTD_WRITEABLE)) { - err = -EROFS; - break; - } length -= erase->len; if ((err = concat_dev_erase(subdev, erase))) { /* sanity check: should never happen since @@ -538,9 +499,6 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) struct mtd_concat *concat = CONCAT(mtd); int i, err = -EINVAL; - if ((len + ofs) > mtd->size) - return -EINVAL; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; uint64_t size; @@ -575,9 +533,6 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) struct mtd_concat *concat = CONCAT(mtd); int i, err = 0; - if ((len + ofs) > mtd->size) - return -EINVAL; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; uint64_t size; @@ -650,9 +605,6 @@ static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs) if (!mtd_can_have_bb(concat->subdev[0])) return res; - if (ofs > mtd->size) - return -EINVAL; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; @@ -673,12 +625,6 @@ static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs) struct mtd_concat *concat = CONCAT(mtd); int i, err = -EINVAL; - if (!mtd_can_have_bb(concat->subdev[0])) - return 0; - - if (ofs > mtd->size) - return -EINVAL; - for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; @@ -716,10 +662,6 @@ static unsigned long concat_get_unmapped_area(struct mtd_info *mtd, continue; } - /* we've found the subdev over which the mapping will reside */ - if (offset + len > subdev->size) - return (unsigned long) -EINVAL; - return mtd_get_unmapped_area(subdev, len, offset, flags); } @@ -777,16 +719,16 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->mtd.subpage_sft = subdev[0]->subpage_sft; concat->mtd.oobsize = subdev[0]->oobsize; concat->mtd.oobavail = subdev[0]->oobavail; - if (subdev[0]->writev) - concat->mtd.writev = concat_writev; - if (subdev[0]->read_oob) - concat->mtd.read_oob = concat_read_oob; - if (subdev[0]->write_oob) - concat->mtd.write_oob = concat_write_oob; - if (subdev[0]->block_isbad) - concat->mtd.block_isbad = concat_block_isbad; - if (subdev[0]->block_markbad) - concat->mtd.block_markbad = concat_block_markbad; + if (subdev[0]->_writev) + concat->mtd._writev = concat_writev; + if (subdev[0]->_read_oob) + concat->mtd._read_oob = concat_read_oob; + if (subdev[0]->_write_oob) + concat->mtd._write_oob = concat_write_oob; + if (subdev[0]->_block_isbad) + concat->mtd._block_isbad = concat_block_isbad; + if (subdev[0]->_block_markbad) + concat->mtd._block_markbad = concat_block_markbad; concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks; @@ -833,8 +775,8 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c if (concat->mtd.writesize != subdev[i]->writesize || concat->mtd.subpage_sft != subdev[i]->subpage_sft || concat->mtd.oobsize != subdev[i]->oobsize || - !concat->mtd.read_oob != !subdev[i]->read_oob || - !concat->mtd.write_oob != !subdev[i]->write_oob) { + !concat->mtd._read_oob != !subdev[i]->_read_oob || + !concat->mtd._write_oob != !subdev[i]->_write_oob) { kfree(concat); printk("Incompatible OOB or ECC data on \"%s\"\n", subdev[i]->name); @@ -849,15 +791,15 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->num_subdev = num_devs; concat->mtd.name = name; - concat->mtd.erase = concat_erase; - concat->mtd.read = concat_read; - concat->mtd.write = concat_write; - concat->mtd.sync = concat_sync; - concat->mtd.lock = concat_lock; - concat->mtd.unlock = concat_unlock; - concat->mtd.suspend = concat_suspend; - concat->mtd.resume = concat_resume; - concat->mtd.get_unmapped_area = concat_get_unmapped_area; + concat->mtd._erase = concat_erase; + concat->mtd._read = concat_read; + concat->mtd._write = concat_write; + concat->mtd._sync = concat_sync; + concat->mtd._lock = concat_lock; + concat->mtd._unlock = concat_unlock; + concat->mtd._suspend = concat_suspend; + concat->mtd._resume = concat_resume; + concat->mtd._get_unmapped_area = concat_get_unmapped_area; /* * Combine the erase block size info of the subdevices: diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 9a9ce71..c837507 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -107,7 +107,7 @@ static LIST_HEAD(mtd_notifiers); */ static void mtd_release(struct device *dev) { - struct mtd_info *mtd = dev_get_drvdata(dev); + struct mtd_info __maybe_unused *mtd = dev_get_drvdata(dev); dev_t index = MTD_DEVT(mtd->index); /* remove /dev/mtdXro node if needed */ @@ -126,7 +126,7 @@ static int mtd_cls_resume(struct device *dev) { struct mtd_info *mtd = dev_get_drvdata(dev); - if (mtd && mtd->resume) + if (mtd) mtd_resume(mtd); return 0; } @@ -610,8 +610,8 @@ int __get_mtd_device(struct mtd_info *mtd) if (!try_module_get(mtd->owner)) return -ENODEV; - if (mtd->get_device) { - err = mtd->get_device(mtd); + if (mtd->_get_device) { + err = mtd->_get_device(mtd); if (err) { module_put(mtd->owner); @@ -675,14 +675,267 @@ void __put_mtd_device(struct mtd_info *mtd) --mtd->usecount; BUG_ON(mtd->usecount < 0); - if (mtd->put_device) - mtd->put_device(mtd); + if (mtd->_put_device) + mtd->_put_device(mtd); module_put(mtd->owner); } EXPORT_SYMBOL_GPL(__put_mtd_device); /* + * Erase is an asynchronous operation. Device drivers are supposed + * to call instr->callback() whenever the operation completes, even + * if it completes with a failure. + * Callers are supposed to pass a callback function and wait for it + * to be called before writing to the block. + */ +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + if (instr->addr > mtd->size || instr->len > mtd->size - instr->addr) + return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; + if (!instr->len) { + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + return 0; + } + return mtd->_erase(mtd, instr); +} +EXPORT_SYMBOL_GPL(mtd_erase); + +/* + * This stuff for eXecute-In-Place. phys is optional and may be set to NULL. + */ +int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + void **virt, resource_size_t *phys) +{ + *retlen = 0; + *virt = NULL; + if (phys) + *phys = 0; + if (!mtd->_point) + return -EOPNOTSUPP; + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + if (!len) + return 0; + return mtd->_point(mtd, from, len, retlen, virt, phys); +} +EXPORT_SYMBOL_GPL(mtd_point); + +/* We probably shouldn't allow XIP if the unpoint isn't a NULL */ +int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +{ + if (!mtd->_point) + return -EOPNOTSUPP; + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + if (!len) + return 0; + return mtd->_unpoint(mtd, from, len); +} +EXPORT_SYMBOL_GPL(mtd_unpoint); + +/* + * Allow NOMMU mmap() to directly map the device (if not NULL) + * - return the address to which the offset maps + * - return -ENOSYS to indicate refusal to do the mapping + */ +unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len, + unsigned long offset, unsigned long flags) +{ + if (!mtd->_get_unmapped_area) + return -EOPNOTSUPP; + if (offset > mtd->size || len > mtd->size - offset) + return -EINVAL; + return mtd->_get_unmapped_area(mtd, len, offset, flags); +} +EXPORT_SYMBOL_GPL(mtd_get_unmapped_area); + +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf) +{ + *retlen = 0; + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + if (!len) + return 0; + return mtd->_read(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read); + +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf) +{ + *retlen = 0; + if (to < 0 || to > mtd->size || len > mtd->size - to) + return -EINVAL; + if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + if (!len) + return 0; + return mtd->_write(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_write); + +/* + * In blackbox flight recorder like scenarios we want to make successful writes + * in interrupt context. panic_write() is only intended to be called when its + * known the kernel is about to panic and we need the write to succeed. Since + * the kernel is not going to be running for much longer, this function can + * break locks and delay to ensure the write succeeds (but not sleep). + */ +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf) +{ + *retlen = 0; + if (!mtd->_panic_write) + return -EOPNOTSUPP; + if (to < 0 || to > mtd->size || len > mtd->size - to) + return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + if (!len) + return 0; + return mtd->_panic_write(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_panic_write); + +/* + * Method to access the protection register area, present in some flash + * devices. The user data is one time programmable but the factory data is read + * only. + */ +int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len) +{ + if (!mtd->_get_fact_prot_info) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_get_fact_prot_info(mtd, buf, len); +} +EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info); + +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_read_fact_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg); + +int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len) +{ + if (!mtd->_get_user_prot_info) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_get_user_prot_info(mtd, buf, len); +} +EXPORT_SYMBOL_GPL(mtd_get_user_prot_info); + +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_read_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg); + +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_write_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg); + +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len) +{ + if (!mtd->_lock_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_lock_user_prot_reg(mtd, from, len); +} +EXPORT_SYMBOL_GPL(mtd_lock_user_prot_reg); + +/* Chip-supported device locking */ +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_lock) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + if (!len) + return 0; + return mtd->_lock(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_lock); + +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_unlock) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + if (!len) + return 0; + return mtd->_unlock(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_unlock); + +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_is_locked) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + if (!len) + return 0; + return mtd->_is_locked(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_is_locked); + +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs) +{ + if (!mtd->_block_isbad) + return 0; + if (ofs < 0 || ofs > mtd->size) + return -EINVAL; + return mtd->_block_isbad(mtd, ofs); +} +EXPORT_SYMBOL_GPL(mtd_block_isbad); + +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + if (!mtd->_block_markbad) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size) + return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + return mtd->_block_markbad(mtd, ofs); +} +EXPORT_SYMBOL_GPL(mtd_block_markbad); + +/* * default_mtd_writev - the default writev method * @mtd: mtd device description object pointer * @vecs: the vectors to write @@ -729,9 +982,11 @@ int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen) { *retlen = 0; - if (!mtd->writev) + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; + if (!mtd->_writev) return default_mtd_writev(mtd, vecs, count, to, retlen); - return mtd->writev(mtd, vecs, count, to, retlen); + return mtd->_writev(mtd, vecs, count, to, retlen); } EXPORT_SYMBOL_GPL(mtd_writev); diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index 3ce99e0..ae36d7e 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -169,7 +169,7 @@ static void mtdoops_workfunc_erase(struct work_struct *work) cxt->nextpage = 0; } - while (mtd_can_have_bb(mtd)) { + while (1) { ret = mtd_block_isbad(mtd, cxt->nextpage * record_size); if (!ret) break; @@ -199,9 +199,9 @@ badblock: return; } - if (mtd_can_have_bb(mtd) && ret == -EIO) { + if (ret == -EIO) { ret = mtd_block_markbad(mtd, cxt->nextpage * record_size); - if (ret < 0) { + if (ret < 0 && ret != -EOPNOTSUPP) { printk(KERN_ERR "mtdoops: block_markbad failed, aborting\n"); return; } @@ -257,8 +257,7 @@ static void find_next_position(struct mtdoops_context *cxt) size_t retlen; for (page = 0; page < cxt->oops_pages; page++) { - if (mtd_can_have_bb(mtd) && - mtd_block_isbad(mtd, page * record_size)) + if (mtd_block_isbad(mtd, page * record_size)) continue; /* Assume the page is used */ mark_page_used(cxt, page); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index a3d44c3..9651c06 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -65,12 +65,8 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len, int res; stats = part->master->ecc_stats; - - if (from >= mtd->size) - len = 0; - else if (from + len > mtd->size) - len = mtd->size - from; - res = mtd_read(part->master, from + part->offset, len, retlen, buf); + res = part->master->_read(part->master, from + part->offset, len, + retlen, buf); if (unlikely(res)) { if (mtd_is_bitflip(res)) mtd->ecc_stats.corrected += part->master->ecc_stats.corrected - stats.corrected; @@ -84,19 +80,16 @@ static int part_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { struct mtd_part *part = PART(mtd); - if (from >= mtd->size) - len = 0; - else if (from + len > mtd->size) - len = mtd->size - from; - return mtd_point(part->master, from + part->offset, len, retlen, - virt, phys); + + return part->master->_point(part->master, from + part->offset, len, + retlen, virt, phys); } -static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { struct mtd_part *part = PART(mtd); - mtd_unpoint(part->master, from + part->offset, len); + return part->master->_unpoint(part->master, from + part->offset, len); } static unsigned long part_get_unmapped_area(struct mtd_info *mtd, @@ -107,7 +100,8 @@ static unsigned long part_get_unmapped_area(struct mtd_info *mtd, struct mtd_part *part = PART(mtd); offset += part->offset; - return mtd_get_unmapped_area(part->master, len, offset, flags); + return part->master->_get_unmapped_area(part->master, len, offset, + flags); } static int part_read_oob(struct mtd_info *mtd, loff_t from, @@ -138,7 +132,7 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from, return -EINVAL; } - res = mtd_read_oob(part->master, from + part->offset, ops); + res = part->master->_read_oob(part->master, from + part->offset, ops); if (unlikely(res)) { if (mtd_is_bitflip(res)) mtd->ecc_stats.corrected++; @@ -152,55 +146,46 @@ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return mtd_read_user_prot_reg(part->master, from, len, retlen, buf); + return part->master->_read_user_prot_reg(part->master, from, len, + retlen, buf); } static int part_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, size_t len) { struct mtd_part *part = PART(mtd); - return mtd_get_user_prot_info(part->master, buf, len); + return part->master->_get_user_prot_info(part->master, buf, len); } static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return mtd_read_fact_prot_reg(part->master, from, len, retlen, buf); + return part->master->_read_fact_prot_reg(part->master, from, len, + retlen, buf); } static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, size_t len) { struct mtd_part *part = PART(mtd); - return mtd_get_fact_prot_info(part->master, buf, len); + return part->master->_get_fact_prot_info(part->master, buf, len); } static int part_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (to >= mtd->size) - len = 0; - else if (to + len > mtd->size) - len = mtd->size - to; - return mtd_write(part->master, to + part->offset, len, retlen, buf); + return part->master->_write(part->master, to + part->offset, len, + retlen, buf); } static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (to >= mtd->size) - len = 0; - else if (to + len > mtd->size) - len = mtd->size - to; - return mtd_panic_write(part->master, to + part->offset, len, retlen, - buf); + return part->master->_panic_write(part->master, to + part->offset, len, + retlen, buf); } static int part_write_oob(struct mtd_info *mtd, loff_t to, @@ -208,50 +193,43 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to, { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (to >= mtd->size) return -EINVAL; if (ops->datbuf && to + ops->len > mtd->size) return -EINVAL; - return mtd_write_oob(part->master, to + part->offset, ops); + return part->master->_write_oob(part->master, to + part->offset, ops); } static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return mtd_write_user_prot_reg(part->master, from, len, retlen, buf); + return part->master->_write_user_prot_reg(part->master, from, len, + retlen, buf); } static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len) { struct mtd_part *part = PART(mtd); - return mtd_lock_user_prot_reg(part->master, from, len); + return part->master->_lock_user_prot_reg(part->master, from, len); } static int part_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - return mtd_writev(part->master, vecs, count, to + part->offset, - retlen); + return part->master->_writev(part->master, vecs, count, + to + part->offset, retlen); } static int part_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mtd_part *part = PART(mtd); int ret; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (instr->addr >= mtd->size) - return -EINVAL; + instr->addr += part->offset; - ret = mtd_erase(part->master, instr); + ret = part->master->_erase(part->master, instr); if (ret) { if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) instr->fail_addr -= part->offset; @@ -262,7 +240,7 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr) void mtd_erase_callback(struct erase_info *instr) { - if (instr->mtd->erase == part_erase) { + if (instr->mtd->_erase == part_erase) { struct mtd_part *part = PART(instr->mtd); if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) @@ -277,52 +255,44 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback); static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) - return -EINVAL; - return mtd_lock(part->master, ofs + part->offset, len); + return part->master->_lock(part->master, ofs + part->offset, len); } static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) - return -EINVAL; - return mtd_unlock(part->master, ofs + part->offset, len); + return part->master->_unlock(part->master, ofs + part->offset, len); } static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) { struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) - return -EINVAL; - return mtd_is_locked(part->master, ofs + part->offset, len); + return part->master->_is_locked(part->master, ofs + part->offset, len); } static void part_sync(struct mtd_info *mtd) { struct mtd_part *part = PART(mtd); - mtd_sync(part->master); + part->master->_sync(part->master); } static int part_suspend(struct mtd_info *mtd) { struct mtd_part *part = PART(mtd); - return mtd_suspend(part->master); + return part->master->_suspend(part->master); } static void part_resume(struct mtd_info *mtd) { struct mtd_part *part = PART(mtd); - mtd_resume(part->master); + part->master->_resume(part->master); } static int part_block_isbad(struct mtd_info *mtd, loff_t ofs) { struct mtd_part *part = PART(mtd); - if (ofs >= mtd->size) - return -EINVAL; ofs += part->offset; - return mtd_block_isbad(part->master, ofs); + return part->master->_block_isbad(part->master, ofs); } static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) @@ -330,12 +300,8 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) struct mtd_part *part = PART(mtd); int res; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (ofs >= mtd->size) - return -EINVAL; ofs += part->offset; - res = mtd_block_markbad(part->master, ofs); + res = part->master->_block_markbad(part->master, ofs); if (!res) mtd->ecc_stats.badblocks++; return res; @@ -410,54 +376,55 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, */ slave->mtd.dev.parent = master->dev.parent; - slave->mtd.read = part_read; - slave->mtd.write = part_write; + slave->mtd._read = part_read; + slave->mtd._write = part_write; - if (master->panic_write) - slave->mtd.panic_write = part_panic_write; + if (master->_panic_write) + slave->mtd._panic_write = part_panic_write; - if (master->point && master->unpoint) { - slave->mtd.point = part_point; - slave->mtd.unpoint = part_unpoint; + if (master->_point && master->_unpoint) { + slave->mtd._point = part_point; + slave->mtd._unpoint = part_unpoint; } - if (master->get_unmapped_area) - slave->mtd.get_unmapped_area = part_get_unmapped_area; - if (master->read_oob) - slave->mtd.read_oob = part_read_oob; - if (master->write_oob) - slave->mtd.write_oob = part_write_oob; - if (master->read_user_prot_reg) - slave->mtd.read_user_prot_reg = part_read_user_prot_reg; - if (master->read_fact_prot_reg) - slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg; - if (master->write_user_prot_reg) - slave->mtd.write_user_prot_reg = part_write_user_prot_reg; - if (master->lock_user_prot_reg) - slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg; - if (master->get_user_prot_info) - slave->mtd.get_user_prot_info = part_get_user_prot_info; - if (master->get_fact_prot_info) - slave->mtd.get_fact_prot_info = part_get_fact_prot_info; - if (master->sync) - slave->mtd.sync = part_sync; - if (!partno && !master->dev.class && master->suspend && master->resume) { - slave->mtd.suspend = part_suspend; - slave->mtd.resume = part_resume; + if (master->_get_unmapped_area) + slave->mtd._get_unmapped_area = part_get_unmapped_area; + if (master->_read_oob) + slave->mtd._read_oob = part_read_oob; + if (master->_write_oob) + slave->mtd._write_oob = part_write_oob; + if (master->_read_user_prot_reg) + slave->mtd._read_user_prot_reg = part_read_user_prot_reg; + if (master->_read_fact_prot_reg) + slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg; + if (master->_write_user_prot_reg) + slave->mtd._write_user_prot_reg = part_write_user_prot_reg; + if (master->_lock_user_prot_reg) + slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg; + if (master->_get_user_prot_info) + slave->mtd._get_user_prot_info = part_get_user_prot_info; + if (master->_get_fact_prot_info) + slave->mtd._get_fact_prot_info = part_get_fact_prot_info; + if (master->_sync) + slave->mtd._sync = part_sync; + if (!partno && !master->dev.class && master->_suspend && + master->_resume) { + slave->mtd._suspend = part_suspend; + slave->mtd._resume = part_resume; } - if (master->writev) - slave->mtd.writev = part_writev; - if (master->lock) - slave->mtd.lock = part_lock; - if (master->unlock) - slave->mtd.unlock = part_unlock; - if (master->is_locked) - slave->mtd.is_locked = part_is_locked; - if (master->block_isbad) - slave->mtd.block_isbad = part_block_isbad; - if (master->block_markbad) - slave->mtd.block_markbad = part_block_markbad; - slave->mtd.erase = part_erase; + if (master->_writev) + slave->mtd._writev = part_writev; + if (master->_lock) + slave->mtd._lock = part_lock; + if (master->_unlock) + slave->mtd._unlock = part_unlock; + if (master->_is_locked) + slave->mtd._is_locked = part_is_locked; + if (master->_block_isbad) + slave->mtd._block_isbad = part_block_isbad; + if (master->_block_markbad) + slave->mtd._block_markbad = part_block_markbad; + slave->mtd._erase = part_erase; slave->master = master; slave->offset = part->offset; @@ -549,7 +516,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, } slave->mtd.ecclayout = master->ecclayout; - if (master->block_isbad) { + slave->mtd.ecc_strength = master->ecc_strength; + if (master->_block_isbad) { uint64_t offs = 0; while (offs < slave->mtd.size) { @@ -761,7 +729,7 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types, for ( ; ret <= 0 && *types; types++) { parser = get_partition_parser(*types); if (!parser && !request_module("%s", *types)) - parser = get_partition_parser(*types); + parser = get_partition_parser(*types); if (!parser) continue; ret = (*parser->parse_fn)(master, pparts, data); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 3d8d2d8..7d17cec 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -246,6 +246,7 @@ config MTD_NAND_BCM_UMI_HWCS config MTD_NAND_DISKONCHIP tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)" depends on EXPERIMENTAL + depends on HAS_IOMEM select REED_SOLOMON select REED_SOLOMON_DEC16 help @@ -313,6 +314,26 @@ config MTD_NAND_DISKONCHIP_BBTWRITE load time (assuming you build diskonchip as a module) with the module parameter "inftl_bbt_write=1". +config MTD_NAND_DOCG4 + tristate "Support for DiskOnChip G4 (EXPERIMENTAL)" + depends on EXPERIMENTAL + select BCH + select BITREVERSE + help + Support for diskonchip G4 nand flash, found in various smartphones and + PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba + Portege G900, Asus P526, and O2 XDA Zinc. + + With this driver you will be able to use UBI and create a ubifs on the + device, so you may wish to consider enabling UBI and UBIFS as well. + + These devices ship with the Mys/Sandisk SAFTL formatting, for which + there is currently no mtd parser, so you may want to use command line + partitioning to segregate write-protected blocks. On the Treo680, the + first five erase blocks (256KiB each) are write-protected, followed + by the block containing the saftl partition table. This is probably + typical. + config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on ARCH_PXA @@ -420,7 +441,6 @@ config MTD_NAND_NANDSIM config MTD_NAND_GPMI_NAND bool "GPMI NAND Flash Controller driver" depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28) - select MTD_CMDLINE_PARTS help Enables NAND Flash support for IMX23 or IMX28. The GPMI controller is very powerful, with the help of BCH @@ -431,6 +451,7 @@ config MTD_NAND_GPMI_NAND config MTD_NAND_PLATFORM tristate "Support for generic platform NAND driver" + depends on HAS_IOMEM help This implements a generic NAND driver for on-SOC platform devices. You will need to provide platform-specific functions diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 19bc8cb..d4b4d87 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o +obj-$(CONFIG_MTD_NAND_DOCG4) += docg4.o obj-$(CONFIG_MTD_NAND_FSMC) += fsmc_nand.o obj-$(CONFIG_MTD_NAND_H1900) += h1910.o obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c index 6a5ff64..4f20e1d 100644 --- a/drivers/mtd/nand/alauda.c +++ b/drivers/mtd/nand/alauda.c @@ -585,12 +585,13 @@ static int alauda_init_media(struct alauda *al) mtd->writesize = 1<<card->pageshift; mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->read = alauda_read; - mtd->write = alauda_write; - mtd->erase = alauda_erase; - mtd->block_isbad = alauda_isbad; + mtd->_read = alauda_read; + mtd->_write = alauda_write; + mtd->_erase = alauda_erase; + mtd->_block_isbad = alauda_isbad; mtd->priv = al; mtd->owner = THIS_MODULE; + mtd->ecc_strength = 1; err = mtd_device_register(mtd, NULL, 0); if (err) { diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 35b4fb5..2165576 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -27,6 +27,10 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/of_mtd.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -34,22 +38,10 @@ #include <linux/dmaengine.h> #include <linux/gpio.h> #include <linux/io.h> +#include <linux/platform_data/atmel.h> -#include <mach/board.h> #include <mach/cpu.h> -#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW -#define hard_ecc 1 -#else -#define hard_ecc 0 -#endif - -#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE -#define no_ecc 1 -#else -#define no_ecc 0 -#endif - static int use_dma = 1; module_param(use_dma, int, 0); @@ -95,7 +87,7 @@ struct atmel_nand_host { struct mtd_info mtd; void __iomem *io_base; dma_addr_t io_phys; - struct atmel_nand_data *board; + struct atmel_nand_data board; struct device *dev; void __iomem *ecc; @@ -113,8 +105,8 @@ static int cpu_has_dma(void) */ static void atmel_nand_enable(struct atmel_nand_host *host) { - if (gpio_is_valid(host->board->enable_pin)) - gpio_set_value(host->board->enable_pin, 0); + if (gpio_is_valid(host->board.enable_pin)) + gpio_set_value(host->board.enable_pin, 0); } /* @@ -122,8 +114,8 @@ static void atmel_nand_enable(struct atmel_nand_host *host) */ static void atmel_nand_disable(struct atmel_nand_host *host) { - if (gpio_is_valid(host->board->enable_pin)) - gpio_set_value(host->board->enable_pin, 1); + if (gpio_is_valid(host->board.enable_pin)) + gpio_set_value(host->board.enable_pin, 1); } /* @@ -144,9 +136,9 @@ static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl return; if (ctrl & NAND_CLE) - writeb(cmd, host->io_base + (1 << host->board->cle)); + writeb(cmd, host->io_base + (1 << host->board.cle)); else - writeb(cmd, host->io_base + (1 << host->board->ale)); + writeb(cmd, host->io_base + (1 << host->board.ale)); } /* @@ -157,8 +149,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) struct nand_chip *nand_chip = mtd->priv; struct atmel_nand_host *host = nand_chip->priv; - return gpio_get_value(host->board->rdy_pin) ^ - !!host->board->rdy_pin_active_low; + return gpio_get_value(host->board.rdy_pin) ^ + !!host->board.rdy_pin_active_low; } /* @@ -273,7 +265,7 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len) if (atmel_nand_dma_op(mtd, buf, len, 1) == 0) return; - if (host->board->bus_width_16) + if (host->board.bus_width_16) atmel_read_buf16(mtd, buf, len); else atmel_read_buf8(mtd, buf, len); @@ -289,7 +281,7 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len) if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0) return; - if (host->board->bus_width_16) + if (host->board.bus_width_16) atmel_write_buf16(mtd, buf, len); else atmel_write_buf8(mtd, buf, len); @@ -481,6 +473,56 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) } } +#if defined(CONFIG_OF) +static int __devinit atmel_of_init_port(struct atmel_nand_host *host, + struct device_node *np) +{ + u32 val; + int ecc_mode; + struct atmel_nand_data *board = &host->board; + enum of_gpio_flags flags; + + if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) { + if (val >= 32) { + dev_err(host->dev, "invalid addr-offset %u\n", val); + return -EINVAL; + } + board->ale = val; + } + + if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) { + if (val >= 32) { + dev_err(host->dev, "invalid cmd-offset %u\n", val); + return -EINVAL; + } + board->cle = val; + } + + ecc_mode = of_get_nand_ecc_mode(np); + + board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode; + + board->on_flash_bbt = of_get_nand_on_flash_bbt(np); + + if (of_get_nand_bus_width(np) == 16) + board->bus_width_16 = 1; + + board->rdy_pin = of_get_gpio_flags(np, 0, &flags); + board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW); + + board->enable_pin = of_get_gpio(np, 1); + board->det_pin = of_get_gpio(np, 2); + + return 0; +} +#else +static int __devinit atmel_of_init_port(struct atmel_nand_host *host, + struct device_node *np) +{ + return -EINVAL; +} +#endif + /* * Probe for the NAND device. */ @@ -491,6 +533,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) struct nand_chip *nand_chip; struct resource *regs; struct resource *mem; + struct mtd_part_parser_data ppdata = {}; int res; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -517,8 +560,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev) mtd = &host->mtd; nand_chip = &host->nand_chip; - host->board = pdev->dev.platform_data; host->dev = &pdev->dev; + if (pdev->dev.of_node) { + res = atmel_of_init_port(host, pdev->dev.of_node); + if (res) + goto err_nand_ioremap; + } else { + memcpy(&host->board, pdev->dev.platform_data, + sizeof(struct atmel_nand_data)); + } nand_chip->priv = host; /* link the private data structures */ mtd->priv = nand_chip; @@ -529,36 +579,36 @@ static int __init atmel_nand_probe(struct platform_device *pdev) nand_chip->IO_ADDR_W = host->io_base; nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl; - if (gpio_is_valid(host->board->rdy_pin)) + if (gpio_is_valid(host->board.rdy_pin)) nand_chip->dev_ready = atmel_nand_device_ready; + nand_chip->ecc.mode = host->board.ecc_mode; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!regs && hard_ecc) { + if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) { printk(KERN_ERR "atmel_nand: can't get I/O resource " "regs\nFalling back on software ECC\n"); + nand_chip->ecc.mode = NAND_ECC_SOFT; } - nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */ - if (no_ecc) - nand_chip->ecc.mode = NAND_ECC_NONE; - if (hard_ecc && regs) { + if (nand_chip->ecc.mode == NAND_ECC_HW) { host->ecc = ioremap(regs->start, resource_size(regs)); if (host->ecc == NULL) { printk(KERN_ERR "atmel_nand: ioremap failed\n"); res = -EIO; goto err_ecc_ioremap; } - nand_chip->ecc.mode = NAND_ECC_HW; nand_chip->ecc.calculate = atmel_nand_calculate; nand_chip->ecc.correct = atmel_nand_correct; nand_chip->ecc.hwctl = atmel_nand_hwctl; nand_chip->ecc.read_page = atmel_nand_read_page; nand_chip->ecc.bytes = 4; + nand_chip->ecc.strength = 1; } nand_chip->chip_delay = 20; /* 20us command delay time */ - if (host->board->bus_width_16) /* 16-bit bus width */ + if (host->board.bus_width_16) /* 16-bit bus width */ nand_chip->options |= NAND_BUSWIDTH_16; nand_chip->read_buf = atmel_read_buf; @@ -567,15 +617,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); atmel_nand_enable(host); - if (gpio_is_valid(host->board->det_pin)) { - if (gpio_get_value(host->board->det_pin)) { + if (gpio_is_valid(host->board.det_pin)) { + if (gpio_get_value(host->board.det_pin)) { printk(KERN_INFO "No SmartMedia card inserted.\n"); res = -ENXIO; goto err_no_card; } } - if (on_flash_bbt) { + if (host->board.on_flash_bbt || on_flash_bbt) { printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); nand_chip->bbt_options |= NAND_BBT_USE_FLASH; } @@ -650,8 +700,9 @@ static int __init atmel_nand_probe(struct platform_device *pdev) } mtd->name = "atmel_nand"; - res = mtd_device_parse_register(mtd, NULL, 0, - host->board->parts, host->board->num_parts); + ppdata.of_node = pdev->dev.of_node; + res = mtd_device_parse_register(mtd, NULL, &ppdata, + host->board.parts, host->board.num_parts); if (!res) return res; @@ -695,11 +746,21 @@ static int __exit atmel_nand_remove(struct platform_device *pdev) return 0; } +#if defined(CONFIG_OF) +static const struct of_device_id atmel_nand_dt_ids[] = { + { .compatible = "atmel,at91rm9200-nand" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids); +#endif + static struct platform_driver atmel_nand_driver = { .remove = __exit_p(atmel_nand_remove), .driver = { .name = "atmel_nand", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_nand_dt_ids), }, }; diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 50387fd..6908cdd 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -31,7 +31,6 @@ #include <linux/mtd/partitions.h> #include <asm/mach-types.h> -#include <asm/system.h> #include <mach/reg_nand.h> #include <mach/reg_umi.h> @@ -476,6 +475,14 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) largepage_bbt.options = NAND_BBT_SCAN2NDPAGE; this->badblock_pattern = &largepage_bbt; } + + /* + * FIXME: ecc strength value of 6 bits per 512 bytes of data is a + * conservative guess, given 13 ecc bytes and using bch alg. + * (Assume Galois field order m=15 to allow a margin of error.) + */ + this->ecc.strength = 6; + #endif /* Now finish off the scan, now that ecc.layout has been initialized. */ @@ -488,7 +495,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) /* Register the partitions */ board_mtd->name = "bcm_umi-nand"; - mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0); + mtd_device_parse_register(board_mtd, NULL, NULL, NULL, 0); /* Return happy */ return 0; diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index dd899cb..d7b86b9 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -702,9 +702,11 @@ static int bf5xx_nand_scan(struct mtd_info *mtd) if (likely(mtd->writesize >= 512)) { chip->ecc.size = 512; chip->ecc.bytes = 6; + chip->ecc.strength = 2; } else { chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET)); SSYNC(); } diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 72d3f23..2a96e1a 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -783,6 +783,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME; cafe->nand.ecc.size = mtd->writesize; cafe->nand.ecc.bytes = 14; + cafe->nand.ecc.strength = 4; cafe->nand.ecc.hwctl = (void *)cafe_nand_bug; cafe->nand.ecc.calculate = (void *)cafe_nand_bug; cafe->nand.ecc.correct = (void *)cafe_nand_bug; @@ -799,7 +800,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, mtd); mtd->name = "cafe_nand"; - mtd_device_parse_register(mtd, part_probes, 0, NULL, 0); + mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0); goto out; diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index 737ef9a..1024bfc 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -219,7 +219,7 @@ static int __init cmx270_init(void) } /* Register the partitions */ - ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0, + ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, NULL, partition_info, NUM_PARTITIONS); if (ret) goto err_scan; diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 414afa7..821c34c 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -248,6 +248,8 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) goto out_ior; } + this->ecc.strength = 1; + new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs); cs553x_mtd[cs] = new_mtd; @@ -313,7 +315,7 @@ static int __init cs553x_init(void) for (i = 0; i < NR_CS553X_CONTROLLERS; i++) { if (cs553x_mtd[i]) { /* If any devices registered, return success. Else the last error. */ - mtd_device_parse_register(cs553x_mtd[i], NULL, 0, + mtd_device_parse_register(cs553x_mtd[i], NULL, NULL, NULL, 0); err = 0; } diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 6e56615..d94b03c 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -641,6 +641,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.ecc.bytes = 3; } info->chip.ecc.size = 512; + info->chip.ecc.strength = pdata->ecc_bits; break; default: ret = -EINVAL; @@ -752,8 +753,8 @@ syndrome_done: if (ret < 0) goto err_scan; - ret = mtd_device_parse_register(&info->mtd, NULL, 0, - pdata->parts, pdata->nr_parts); + ret = mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts, + pdata->nr_parts); if (ret < 0) goto err_scan; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 3984d48..a9e57d6 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1590,6 +1590,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) ECC_15BITS * (denali->mtd.writesize / ECC_SECTOR_SIZE)))) { /* if MLC OOB size is large enough, use 15bit ECC*/ + denali->nand.ecc.strength = 15; denali->nand.ecc.layout = &nand_15bit_oob; denali->nand.ecc.bytes = ECC_15BITS; iowrite32(15, denali->flash_reg + ECC_CORRECTION); @@ -1600,12 +1601,14 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) " contain 8bit ECC correction codes"); goto failed_req_irq; } else { + denali->nand.ecc.strength = 8; denali->nand.ecc.layout = &nand_8bit_oob; denali->nand.ecc.bytes = ECC_8BITS; iowrite32(8, denali->flash_reg + ECC_CORRECTION); } denali->nand.ecc.bytes *= denali->devnum; + denali->nand.ecc.strength *= denali->devnum; denali->nand.ecc.layout->eccbytes *= denali->mtd.writesize / ECC_SECTOR_SIZE; denali->nand.ecc.layout->oobfree[0].offset = diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index df921e7..e2ca067 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1653,6 +1653,7 @@ static int __init doc_probe(unsigned long physadr) nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = 512; nand->ecc.bytes = 6; + nand->ecc.strength = 2; nand->bbt_options = NAND_BBT_USE_FLASH; doc->physadr = physadr; diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c new file mode 100644 index 0000000..b082026 --- /dev/null +++ b/drivers/mtd/nand/docg4.c @@ -0,0 +1,1377 @@ +/* + * Copyright © 2012 Mike Dunn <mikedunn@newsguy.com> + * + * mtd nand driver for M-Systems DiskOnChip G4 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Tested on the Palm Treo 680. The G4 is also present on Toshiba Portege, Asus + * P526, some HTC smartphones (Wizard, Prophet, ...), O2 XDA Zinc, maybe others. + * Should work on these as well. Let me know! + * + * TODO: + * + * Mechanism for management of password-protected areas + * + * Hamming ecc when reading oob only + * + * According to the M-Sys documentation, this device is also available in a + * "dual-die" configuration having a 256MB capacity, but no mechanism for + * detecting this variant is documented. Currently this driver assumes 128MB + * capacity. + * + * Support for multiple cascaded devices ("floors"). Not sure which gadgets + * contain multiple G4s in a cascaded configuration, if any. + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/export.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/bch.h> +#include <linux/bitrev.h> + +/* + * You'll want to ignore badblocks if you're reading a partition that contains + * data written by the TrueFFS library (i.e., by PalmOS, Windows, etc), since + * it does not use mtd nand's method for marking bad blocks (using oob area). + * This will also skip the check of the "page written" flag. + */ +static bool ignore_badblocks; +module_param(ignore_badblocks, bool, 0); +MODULE_PARM_DESC(ignore_badblocks, "no badblock checking performed"); + +struct docg4_priv { + struct mtd_info *mtd; + struct device *dev; + void __iomem *virtadr; + int status; + struct { + unsigned int command; + int column; + int page; + } last_command; + uint8_t oob_buf[16]; + uint8_t ecc_buf[7]; + int oob_page; + struct bch_control *bch; +}; + +/* + * Defines prefixed with DOCG4 are unique to the diskonchip G4. All others are + * shared with other diskonchip devices (P3, G3 at least). + * + * Functions with names prefixed with docg4_ are mtd / nand interface functions + * (though they may also be called internally). All others are internal. + */ + +#define DOC_IOSPACE_DATA 0x0800 + +/* register offsets */ +#define DOC_CHIPID 0x1000 +#define DOC_DEVICESELECT 0x100a +#define DOC_ASICMODE 0x100c +#define DOC_DATAEND 0x101e +#define DOC_NOP 0x103e + +#define DOC_FLASHSEQUENCE 0x1032 +#define DOC_FLASHCOMMAND 0x1034 +#define DOC_FLASHADDRESS 0x1036 +#define DOC_FLASHCONTROL 0x1038 +#define DOC_ECCCONF0 0x1040 +#define DOC_ECCCONF1 0x1042 +#define DOC_HAMMINGPARITY 0x1046 +#define DOC_BCH_SYNDROM(idx) (0x1048 + idx) + +#define DOC_ASICMODECONFIRM 0x1072 +#define DOC_CHIPID_INV 0x1074 +#define DOC_POWERMODE 0x107c + +#define DOCG4_MYSTERY_REG 0x1050 + +/* apparently used only to write oob bytes 6 and 7 */ +#define DOCG4_OOB_6_7 0x1052 + +/* DOC_FLASHSEQUENCE register commands */ +#define DOC_SEQ_RESET 0x00 +#define DOCG4_SEQ_PAGE_READ 0x03 +#define DOCG4_SEQ_FLUSH 0x29 +#define DOCG4_SEQ_PAGEWRITE 0x16 +#define DOCG4_SEQ_PAGEPROG 0x1e +#define DOCG4_SEQ_BLOCKERASE 0x24 + +/* DOC_FLASHCOMMAND register commands */ +#define DOCG4_CMD_PAGE_READ 0x00 +#define DOC_CMD_ERASECYCLE2 0xd0 +#define DOCG4_CMD_FLUSH 0x70 +#define DOCG4_CMD_READ2 0x30 +#define DOC_CMD_PROG_BLOCK_ADDR 0x60 +#define DOCG4_CMD_PAGEWRITE 0x80 +#define DOC_CMD_PROG_CYCLE2 0x10 +#define DOC_CMD_RESET 0xff + +/* DOC_POWERMODE register bits */ +#define DOC_POWERDOWN_READY 0x80 + +/* DOC_FLASHCONTROL register bits */ +#define DOC_CTRL_CE 0x10 +#define DOC_CTRL_UNKNOWN 0x40 +#define DOC_CTRL_FLASHREADY 0x01 + +/* DOC_ECCCONF0 register bits */ +#define DOC_ECCCONF0_READ_MODE 0x8000 +#define DOC_ECCCONF0_UNKNOWN 0x2000 +#define DOC_ECCCONF0_ECC_ENABLE 0x1000 +#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff + +/* DOC_ECCCONF1 register bits */ +#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80 +#define DOC_ECCCONF1_ECC_ENABLE 0x07 +#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20 + +/* DOC_ASICMODE register bits */ +#define DOC_ASICMODE_RESET 0x00 +#define DOC_ASICMODE_NORMAL 0x01 +#define DOC_ASICMODE_POWERDOWN 0x02 +#define DOC_ASICMODE_MDWREN 0x04 +#define DOC_ASICMODE_BDETCT_RESET 0x08 +#define DOC_ASICMODE_RSTIN_RESET 0x10 +#define DOC_ASICMODE_RAM_WE 0x20 + +/* good status values read after read/write/erase operations */ +#define DOCG4_PROGSTATUS_GOOD 0x51 +#define DOCG4_PROGSTATUS_GOOD_2 0xe0 + +/* + * On read operations (page and oob-only), the first byte read from I/O reg is a + * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read + * after reset only) or 0x51, so bit 1 is presumed to be an error indicator. + */ +#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */ + +/* anatomy of the device */ +#define DOCG4_CHIP_SIZE 0x8000000 +#define DOCG4_PAGE_SIZE 0x200 +#define DOCG4_PAGES_PER_BLOCK 0x200 +#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE) +#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE) +#define DOCG4_OOB_SIZE 0x10 +#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */ +#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */ +#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */ + +/* all but the last byte is included in ecc calculation */ +#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1) + +#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */ + +/* expected values from the ID registers */ +#define DOCG4_IDREG1_VALUE 0x0400 +#define DOCG4_IDREG2_VALUE 0xfbff + +/* primitive polynomial used to build the Galois field used by hw ecc gen */ +#define DOCG4_PRIMITIVE_POLY 0x4443 + +#define DOCG4_M 14 /* Galois field is of order 2^14 */ +#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */ + +#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */ + +/* + * Oob bytes 0 - 6 are available to the user. + * Byte 7 is hamming ecc for first 7 bytes. Bytes 8 - 14 are hw-generated ecc. + * Byte 15 (the last) is used by the driver as a "page written" flag. + */ +static struct nand_ecclayout docg4_oobinfo = { + .eccbytes = 9, + .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15}, + .oobavail = 7, + .oobfree = { {0, 7} } +}; + +/* + * The device has a nop register which M-Sys claims is for the purpose of + * inserting precise delays. But beware; at least some operations fail if the + * nop writes are replaced with a generic delay! + */ +static inline void write_nop(void __iomem *docptr) +{ + writew(0, docptr + DOC_NOP); +} + +static void docg4_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + struct nand_chip *nand = mtd->priv; + uint16_t *p = (uint16_t *) buf; + len >>= 1; + + for (i = 0; i < len; i++) + p[i] = readw(nand->IO_ADDR_R); +} + +static void docg4_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + struct nand_chip *nand = mtd->priv; + uint16_t *p = (uint16_t *) buf; + len >>= 1; + + for (i = 0; i < len; i++) + writew(p[i], nand->IO_ADDR_W); +} + +static int poll_status(struct docg4_priv *doc) +{ + /* + * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL + * register. Operations known to take a long time (e.g., block erase) + * should sleep for a while before calling this. + */ + + uint16_t flash_status; + unsigned int timeo; + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, "%s...\n", __func__); + + /* hardware quirk requires reading twice initially */ + flash_status = readw(docptr + DOC_FLASHCONTROL); + + timeo = 1000; + do { + cpu_relax(); + flash_status = readb(docptr + DOC_FLASHCONTROL); + } while (!(flash_status & DOC_CTRL_FLASHREADY) && --timeo); + + + if (!timeo) { + dev_err(doc->dev, "%s: timed out!\n", __func__); + return NAND_STATUS_FAIL; + } + + if (unlikely(timeo < 50)) + dev_warn(doc->dev, "%s: nearly timed out; %d remaining\n", + __func__, timeo); + + return 0; +} + + +static int docg4_wait(struct mtd_info *mtd, struct nand_chip *nand) +{ + + struct docg4_priv *doc = nand->priv; + int status = NAND_STATUS_WP; /* inverse logic?? */ + dev_dbg(doc->dev, "%s...\n", __func__); + + /* report any previously unreported error */ + if (doc->status) { + status |= doc->status; + doc->status = 0; + return status; + } + + status |= poll_status(doc); + return status; +} + +static void docg4_select_chip(struct mtd_info *mtd, int chip) +{ + /* + * Select among multiple cascaded chips ("floors"). Multiple floors are + * not yet supported, so the only valid non-negative value is 0. + */ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, "%s: chip %d\n", __func__, chip); + + if (chip < 0) + return; /* deselected */ + + if (chip > 0) + dev_warn(doc->dev, "multiple floors currently unsupported\n"); + + writew(0, docptr + DOC_DEVICESELECT); +} + +static void reset(struct mtd_info *mtd) +{ + /* full device reset */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + writew(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN, + docptr + DOC_ASICMODE); + writew(~(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN), + docptr + DOC_ASICMODECONFIRM); + write_nop(docptr); + + writew(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN, + docptr + DOC_ASICMODE); + writew(~(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN), + docptr + DOC_ASICMODECONFIRM); + + writew(DOC_ECCCONF1_ECC_ENABLE, docptr + DOC_ECCCONF1); + + poll_status(doc); +} + +static void read_hw_ecc(void __iomem *docptr, uint8_t *ecc_buf) +{ + /* read the 7 hw-generated ecc bytes */ + + int i; + for (i = 0; i < 7; i++) { /* hw quirk; read twice */ + ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i)); + ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i)); + } +} + +static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page) +{ + /* + * Called after a page read when hardware reports bitflips. + * Up to four bitflips can be corrected. + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + int i, numerrs, errpos[4]; + const uint8_t blank_read_hwecc[8] = { + 0xcf, 0x72, 0xfc, 0x1b, 0xa9, 0xc7, 0xb9, 0 }; + + read_hw_ecc(docptr, doc->ecc_buf); /* read 7 hw-generated ecc bytes */ + + /* check if read error is due to a blank page */ + if (!memcmp(doc->ecc_buf, blank_read_hwecc, 7)) + return 0; /* yes */ + + /* skip additional check of "written flag" if ignore_badblocks */ + if (ignore_badblocks == false) { + + /* + * If the hw ecc bytes are not those of a blank page, there's + * still a chance that the page is blank, but was read with + * errors. Check the "written flag" in last oob byte, which + * is set to zero when a page is written. If more than half + * the bits are set, assume a blank page. Unfortunately, the + * bit flips(s) are not reported in stats. + */ + + if (doc->oob_buf[15]) { + int bit, numsetbits = 0; + unsigned long written_flag = doc->oob_buf[15]; + for_each_set_bit(bit, &written_flag, 8) + numsetbits++; + if (numsetbits > 4) { /* assume blank */ + dev_warn(doc->dev, + "error(s) in blank page " + "at offset %08x\n", + page * DOCG4_PAGE_SIZE); + return 0; + } + } + } + + /* + * The hardware ecc unit produces oob_ecc ^ calc_ecc. The kernel's bch + * algorithm is used to decode this. However the hw operates on page + * data in a bit order that is the reverse of that of the bch alg, + * requiring that the bits be reversed on the result. Thanks to Ivan + * Djelic for his analysis! + */ + for (i = 0; i < 7; i++) + doc->ecc_buf[i] = bitrev8(doc->ecc_buf[i]); + + numerrs = decode_bch(doc->bch, NULL, DOCG4_USERDATA_LEN, NULL, + doc->ecc_buf, NULL, errpos); + + if (numerrs == -EBADMSG) { + dev_warn(doc->dev, "uncorrectable errors at offset %08x\n", + page * DOCG4_PAGE_SIZE); + return -EBADMSG; + } + + BUG_ON(numerrs < 0); /* -EINVAL, or anything other than -EBADMSG */ + + /* undo last step in BCH alg (modulo mirroring not needed) */ + for (i = 0; i < numerrs; i++) + errpos[i] = (errpos[i] & ~7)|(7-(errpos[i] & 7)); + + /* fix the errors */ + for (i = 0; i < numerrs; i++) { + + /* ignore if error within oob ecc bytes */ + if (errpos[i] > DOCG4_USERDATA_LEN * 8) + continue; + + /* if error within oob area preceeding ecc bytes... */ + if (errpos[i] > DOCG4_PAGE_SIZE * 8) + change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8, + (unsigned long *)doc->oob_buf); + + else /* error in page data */ + change_bit(errpos[i], (unsigned long *)buf); + } + + dev_notice(doc->dev, "%d error(s) corrected at offset %08x\n", + numerrs, page * DOCG4_PAGE_SIZE); + + return numerrs; +} + +static uint8_t docg4_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + + dev_dbg(doc->dev, "%s\n", __func__); + + if (doc->last_command.command == NAND_CMD_STATUS) { + int status; + + /* + * Previous nand command was status request, so nand + * infrastructure code expects to read the status here. If an + * error occurred in a previous operation, report it. + */ + doc->last_command.command = 0; + + if (doc->status) { + status = doc->status; + doc->status = 0; + } + + /* why is NAND_STATUS_WP inverse logic?? */ + else + status = NAND_STATUS_WP | NAND_STATUS_READY; + + return status; + } + + dev_warn(doc->dev, "unexpectd call to read_byte()\n"); + + return 0; +} + +static void write_addr(struct docg4_priv *doc, uint32_t docg4_addr) +{ + /* write the four address bytes packed in docg4_addr to the device */ + + void __iomem *docptr = doc->virtadr; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); +} + +static int read_progstatus(struct docg4_priv *doc) +{ + /* + * This apparently checks the status of programming. Done after an + * erasure, and after page data is written. On error, the status is + * saved, to be later retrieved by the nand infrastructure code. + */ + void __iomem *docptr = doc->virtadr; + + /* status is read from the I/O reg */ + uint16_t status1 = readw(docptr + DOC_IOSPACE_DATA); + uint16_t status2 = readw(docptr + DOC_IOSPACE_DATA); + uint16_t status3 = readw(docptr + DOCG4_MYSTERY_REG); + + dev_dbg(doc->dev, "docg4: %s: %02x %02x %02x\n", + __func__, status1, status2, status3); + + if (status1 != DOCG4_PROGSTATUS_GOOD + || status2 != DOCG4_PROGSTATUS_GOOD_2 + || status3 != DOCG4_PROGSTATUS_GOOD_2) { + doc->status = NAND_STATUS_FAIL; + dev_warn(doc->dev, "read_progstatus failed: " + "%02x, %02x, %02x\n", status1, status2, status3); + return -EIO; + } + return 0; +} + +static int pageprog(struct mtd_info *mtd) +{ + /* + * Final step in writing a page. Writes the contents of its + * internal buffer out to the flash array, or some such. + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + int retval = 0; + + dev_dbg(doc->dev, "docg4: %s\n", __func__); + + writew(DOCG4_SEQ_PAGEPROG, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_PROG_CYCLE2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + /* Just busy-wait; usleep_range() slows things down noticeably. */ + poll_status(doc); + + writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND); + writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + retval = read_progstatus(doc); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + poll_status(doc); + write_nop(docptr); + + return retval; +} + +static void sequence_reset(struct mtd_info *mtd) +{ + /* common starting sequence for all operations */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + writew(DOC_CTRL_UNKNOWN | DOC_CTRL_CE, docptr + DOC_FLASHCONTROL); + writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + poll_status(doc); + write_nop(docptr); +} + +static void read_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr) +{ + /* first step in reading a page */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, + "docg4: %s: g4 page %08x\n", __func__, docg4_addr); + + sequence_reset(mtd); + + writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + + write_addr(doc, docg4_addr); + + write_nop(docptr); + writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + poll_status(doc); +} + +static void write_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr) +{ + /* first step in writing a page */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, + "docg4: %s: g4 addr: %x\n", __func__, docg4_addr); + sequence_reset(mtd); + writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_addr(doc, docg4_addr); + write_nop(docptr); + write_nop(docptr); + poll_status(doc); +} + +static uint32_t mtd_to_docg4_address(int page, int column) +{ + /* + * Convert mtd address to format used by the device, 32 bit packed. + * + * Some notes on G4 addressing... The M-Sys documentation on this device + * claims that pages are 2K in length, and indeed, the format of the + * address used by the device reflects that. But within each page are + * four 512 byte "sub-pages", each with its own oob data that is + * read/written immediately after the 512 bytes of page data. This oob + * data contains the ecc bytes for the preceeding 512 bytes. + * + * Rather than tell the mtd nand infrastructure that page size is 2k, + * with four sub-pages each, we engage in a little subterfuge and tell + * the infrastructure code that pages are 512 bytes in size. This is + * done because during the course of reverse-engineering the device, I + * never observed an instance where an entire 2K "page" was read or + * written as a unit. Each "sub-page" is always addressed individually, + * its data read/written, and ecc handled before the next "sub-page" is + * addressed. + * + * This requires us to convert addresses passed by the mtd nand + * infrastructure code to those used by the device. + * + * The address that is written to the device consists of four bytes: the + * first two are the 2k page number, and the second is the index into + * the page. The index is in terms of 16-bit half-words and includes + * the preceeding oob data, so e.g., the index into the second + * "sub-page" is 0x108, and the full device address of the start of mtd + * page 0x201 is 0x00800108. + */ + int g4_page = page / 4; /* device's 2K page */ + int g4_index = (page % 4) * 0x108 + column/2; /* offset into page */ + return (g4_page << 16) | g4_index; /* pack */ +} + +static void docg4_command(struct mtd_info *mtd, unsigned command, int column, + int page_addr) +{ + /* handle standard nand commands */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + uint32_t g4_addr = mtd_to_docg4_address(page_addr, column); + + dev_dbg(doc->dev, "%s %x, page_addr=%x, column=%x\n", + __func__, command, page_addr, column); + + /* + * Save the command and its arguments. This enables emulation of + * standard flash devices, and also some optimizations. + */ + doc->last_command.command = command; + doc->last_command.column = column; + doc->last_command.page = page_addr; + + switch (command) { + + case NAND_CMD_RESET: + reset(mtd); + break; + + case NAND_CMD_READ0: + read_page_prologue(mtd, g4_addr); + break; + + case NAND_CMD_STATUS: + /* next call to read_byte() will expect a status */ + break; + + case NAND_CMD_SEQIN: + write_page_prologue(mtd, g4_addr); + + /* hack for deferred write of oob bytes */ + if (doc->oob_page == page_addr) + memcpy(nand->oob_poi, doc->oob_buf, 16); + break; + + case NAND_CMD_PAGEPROG: + pageprog(mtd); + break; + + /* we don't expect these, based on review of nand_base.c */ + case NAND_CMD_READOOB: + case NAND_CMD_READID: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + dev_warn(doc->dev, "docg4_command: " + "unexpected nand command 0x%x\n", command); + break; + + } +} + +static int read_page(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page, bool use_ecc) +{ + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint16_t status, edc_err, *buf16; + + dev_dbg(doc->dev, "%s: page %08x\n", __func__, page); + + writew(DOC_ECCCONF0_READ_MODE | + DOC_ECCCONF0_ECC_ENABLE | + DOC_ECCCONF0_UNKNOWN | + DOCG4_BCH_SIZE, + docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + /* the 1st byte from the I/O reg is a status; the rest is page data */ + status = readw(docptr + DOC_IOSPACE_DATA); + if (status & DOCG4_READ_ERROR) { + dev_err(doc->dev, + "docg4_read_page: bad status: 0x%02x\n", status); + writew(0, docptr + DOC_DATAEND); + return -EIO; + } + + dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status); + + docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */ + + /* + * Diskonchips read oob immediately after a page read. Mtd + * infrastructure issues a separate command for reading oob after the + * page is read. So we save the oob bytes in a local buffer and just + * copy it if the next command reads oob from the same page. + */ + + /* first 14 oob bytes read from I/O reg */ + docg4_read_buf(mtd, doc->oob_buf, 14); + + /* last 2 read from another reg */ + buf16 = (uint16_t *)(doc->oob_buf + 14); + *buf16 = readw(docptr + DOCG4_MYSTERY_REG); + + write_nop(docptr); + + if (likely(use_ecc == true)) { + + /* read the register that tells us if bitflip(s) detected */ + edc_err = readw(docptr + DOC_ECCCONF1); + edc_err = readw(docptr + DOC_ECCCONF1); + dev_dbg(doc->dev, "%s: edc_err = 0x%02x\n", __func__, edc_err); + + /* If bitflips are reported, attempt to correct with ecc */ + if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) { + int bits_corrected = correct_data(mtd, buf, page); + if (bits_corrected == -EBADMSG) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += bits_corrected; + } + } + + writew(0, docptr + DOC_DATAEND); + return 0; +} + + +static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page) +{ + return read_page(mtd, nand, buf, page, false); +} + +static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page) +{ + return read_page(mtd, nand, buf, page, true); +} + +static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page, int sndcmd) +{ + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint16_t status; + + dev_dbg(doc->dev, "%s: page %x\n", __func__, page); + + /* + * Oob bytes are read as part of a normal page read. If the previous + * nand command was a read of the page whose oob is now being read, just + * copy the oob bytes that we saved in a local buffer and avoid a + * separate oob read. + */ + if (doc->last_command.command == NAND_CMD_READ0 && + doc->last_command.page == page) { + memcpy(nand->oob_poi, doc->oob_buf, 16); + return 0; + } + + /* + * Separate read of oob data only. + */ + docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page); + + writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + /* the 1st byte from the I/O reg is a status; the rest is oob data */ + status = readw(docptr + DOC_IOSPACE_DATA); + if (status & DOCG4_READ_ERROR) { + dev_warn(doc->dev, + "docg4_read_oob failed: status = 0x%02x\n", status); + return -EIO; + } + + dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status); + + docg4_read_buf(mtd, nand->oob_poi, 16); + + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + + return 0; +} + +static void docg4_erase_block(struct mtd_info *mtd, int page) +{ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint16_t g4_page; + + dev_dbg(doc->dev, "%s: page %04x\n", __func__, page); + + sequence_reset(mtd); + + writew(DOCG4_SEQ_BLOCKERASE, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_PROG_BLOCK_ADDR, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + + /* only 2 bytes of address are written to specify erase block */ + g4_page = (uint16_t)(page / 4); /* to g4's 2k page addressing */ + writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS); + g4_page >>= 8; + writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS); + write_nop(docptr); + + /* start the erasure */ + writew(DOC_CMD_ERASECYCLE2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + usleep_range(500, 1000); /* erasure is long; take a snooze */ + poll_status(doc); + writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND); + writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + read_progstatus(doc); + + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + poll_status(doc); + write_nop(docptr); +} + +static void write_page(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf, bool use_ecc) +{ + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint8_t ecc_buf[8]; + + dev_dbg(doc->dev, "%s...\n", __func__); + + writew(DOC_ECCCONF0_ECC_ENABLE | + DOC_ECCCONF0_UNKNOWN | + DOCG4_BCH_SIZE, + docptr + DOC_ECCCONF0); + write_nop(docptr); + + /* write the page data */ + docg4_write_buf16(mtd, buf, DOCG4_PAGE_SIZE); + + /* oob bytes 0 through 5 are written to I/O reg */ + docg4_write_buf16(mtd, nand->oob_poi, 6); + + /* oob byte 6 written to a separate reg */ + writew(nand->oob_poi[6], docptr + DOCG4_OOB_6_7); + + write_nop(docptr); + write_nop(docptr); + + /* write hw-generated ecc bytes to oob */ + if (likely(use_ecc == true)) { + /* oob byte 7 is hamming code */ + uint8_t hamming = readb(docptr + DOC_HAMMINGPARITY); + hamming = readb(docptr + DOC_HAMMINGPARITY); /* 2nd read */ + writew(hamming, docptr + DOCG4_OOB_6_7); + write_nop(docptr); + + /* read the 7 bch bytes from ecc regs */ + read_hw_ecc(docptr, ecc_buf); + ecc_buf[7] = 0; /* clear the "page written" flag */ + } + + /* write user-supplied bytes to oob */ + else { + writew(nand->oob_poi[7], docptr + DOCG4_OOB_6_7); + write_nop(docptr); + memcpy(ecc_buf, &nand->oob_poi[8], 8); + } + + docg4_write_buf16(mtd, ecc_buf, 8); + write_nop(docptr); + write_nop(docptr); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); +} + +static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf) +{ + return write_page(mtd, nand, buf, false); +} + +static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf) +{ + return write_page(mtd, nand, buf, true); +} + +static int docg4_write_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page) +{ + /* + * Writing oob-only is not really supported, because MLC nand must write + * oob bytes at the same time as page data. Nonetheless, we save the + * oob buffer contents here, and then write it along with the page data + * if the same page is subsequently written. This allows user space + * utilities that write the oob data prior to the page data to work + * (e.g., nandwrite). The disdvantage is that, if the intention was to + * write oob only, the operation is quietly ignored. Also, oob can get + * corrupted if two concurrent processes are running nandwrite. + */ + + /* note that bytes 7..14 are hw generated hamming/ecc and overwritten */ + struct docg4_priv *doc = nand->priv; + doc->oob_page = page; + memcpy(doc->oob_buf, nand->oob_poi, 16); + return 0; +} + +static int __init read_factory_bbt(struct mtd_info *mtd) +{ + /* + * The device contains a read-only factory bad block table. Read it and + * update the memory-based bbt accordingly. + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0); + uint8_t *buf; + int i, block, status; + + buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + read_page_prologue(mtd, g4_addr); + status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE); + if (status) + goto exit; + + /* + * If no memory-based bbt was created, exit. This will happen if module + * parameter ignore_badblocks is set. Then why even call this function? + * For an unknown reason, block erase always fails if it's the first + * operation after device power-up. The above read ensures it never is. + * Ugly, I know. + */ + if (nand->bbt == NULL) /* no memory-based bbt */ + goto exit; + + /* + * Parse factory bbt and update memory-based bbt. Factory bbt format is + * simple: one bit per block, block numbers increase left to right (msb + * to lsb). Bit clear means bad block. + */ + for (i = block = 0; block < DOCG4_NUMBLOCKS; block += 8, i++) { + int bitnum; + unsigned long bits = ~buf[i]; + for_each_set_bit(bitnum, &bits, 8) { + int badblock = block + 7 - bitnum; + nand->bbt[badblock / 4] |= + 0x03 << ((badblock % 4) * 2); + mtd->ecc_stats.badblocks++; + dev_notice(doc->dev, "factory-marked bad block: %d\n", + badblock); + } + } + exit: + kfree(buf); + return status; +} + +static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + /* + * Mark a block as bad. Bad blocks are marked in the oob area of the + * first page of the block. The default scan_bbt() in the nand + * infrastructure code works fine for building the memory-based bbt + * during initialization, as does the nand infrastructure function that + * checks if a block is bad by reading the bbt. This function replaces + * the nand default because writes to oob-only are not supported. + */ + + int ret, i; + uint8_t *buf; + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + struct nand_bbt_descr *bbtd = nand->badblock_pattern; + int block = (int)(ofs >> nand->bbt_erase_shift); + int page = (int)(ofs >> nand->page_shift); + uint32_t g4_addr = mtd_to_docg4_address(page, 0); + + dev_dbg(doc->dev, "%s: %08llx\n", __func__, ofs); + + if (unlikely(ofs & (DOCG4_BLOCK_SIZE - 1))) + dev_warn(doc->dev, "%s: ofs %llx not start of block!\n", + __func__, ofs); + + /* allocate blank buffer for page data */ + buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + /* update bbt in memory */ + nand->bbt[block / 4] |= 0x01 << ((block & 0x03) * 2); + + /* write bit-wise negation of pattern to oob buffer */ + memset(nand->oob_poi, 0xff, mtd->oobsize); + for (i = 0; i < bbtd->len; i++) + nand->oob_poi[bbtd->offs + i] = ~bbtd->pattern[i]; + + /* write first page of block */ + write_page_prologue(mtd, g4_addr); + docg4_write_page(mtd, nand, buf); + ret = pageprog(mtd); + if (!ret) + mtd->ecc_stats.badblocks++; + + kfree(buf); + + return ret; +} + +static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + /* only called when module_param ignore_badblocks is set */ + return 0; +} + +static int docg4_suspend(struct platform_device *pdev, pm_message_t state) +{ + /* + * Put the device into "deep power-down" mode. Note that CE# must be + * deasserted for this to take effect. The xscale, e.g., can be + * configured to float this signal when the processor enters power-down, + * and a suitable pull-up ensures its deassertion. + */ + + int i; + uint8_t pwr_down; + struct docg4_priv *doc = platform_get_drvdata(pdev); + void __iomem *docptr = doc->virtadr; + + dev_dbg(doc->dev, "%s...\n", __func__); + + /* poll the register that tells us we're ready to go to sleep */ + for (i = 0; i < 10; i++) { + pwr_down = readb(docptr + DOC_POWERMODE); + if (pwr_down & DOC_POWERDOWN_READY) + break; + usleep_range(1000, 4000); + } + + if (pwr_down & DOC_POWERDOWN_READY) { + dev_err(doc->dev, "suspend failed; " + "timeout polling DOC_POWERDOWN_READY\n"); + return -EIO; + } + + writew(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN, + docptr + DOC_ASICMODE); + writew(~(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN), + docptr + DOC_ASICMODECONFIRM); + + write_nop(docptr); + + return 0; +} + +static int docg4_resume(struct platform_device *pdev) +{ + + /* + * Exit power-down. Twelve consecutive reads of the address below + * accomplishes this, assuming CE# has been asserted. + */ + + struct docg4_priv *doc = platform_get_drvdata(pdev); + void __iomem *docptr = doc->virtadr; + int i; + + dev_dbg(doc->dev, "%s...\n", __func__); + + for (i = 0; i < 12; i++) + readb(docptr + 0x1fff); + + return 0; +} + +static void __init init_mtd_structs(struct mtd_info *mtd) +{ + /* initialize mtd and nand data structures */ + + /* + * Note that some of the following initializations are not usually + * required within a nand driver because they are performed by the nand + * infrastructure code as part of nand_scan(). In this case they need + * to be initialized here because we skip call to nand_scan_ident() (the + * first half of nand_scan()). The call to nand_scan_ident() is skipped + * because for this device the chip id is not read in the manner of a + * standard nand device. Unfortunately, nand_scan_ident() does other + * things as well, such as call nand_set_defaults(). + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + + mtd->size = DOCG4_CHIP_SIZE; + mtd->name = "Msys_Diskonchip_G4"; + mtd->writesize = DOCG4_PAGE_SIZE; + mtd->erasesize = DOCG4_BLOCK_SIZE; + mtd->oobsize = DOCG4_OOB_SIZE; + nand->chipsize = DOCG4_CHIP_SIZE; + nand->chip_shift = DOCG4_CHIP_SHIFT; + nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT; + nand->chip_delay = 20; + nand->page_shift = DOCG4_PAGE_SHIFT; + nand->pagemask = 0x3ffff; + nand->badblockpos = NAND_LARGE_BADBLOCK_POS; + nand->badblockbits = 8; + nand->ecc.layout = &docg4_oobinfo; + nand->ecc.mode = NAND_ECC_HW_SYNDROME; + nand->ecc.size = DOCG4_PAGE_SIZE; + nand->ecc.prepad = 8; + nand->ecc.bytes = 8; + nand->ecc.strength = DOCG4_T; + nand->options = + NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR; + nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA; + nand->controller = &nand->hwcontrol; + spin_lock_init(&nand->controller->lock); + init_waitqueue_head(&nand->controller->wq); + + /* methods */ + nand->cmdfunc = docg4_command; + nand->waitfunc = docg4_wait; + nand->select_chip = docg4_select_chip; + nand->read_byte = docg4_read_byte; + nand->block_markbad = docg4_block_markbad; + nand->read_buf = docg4_read_buf; + nand->write_buf = docg4_write_buf16; + nand->scan_bbt = nand_default_bbt; + nand->erase_cmd = docg4_erase_block; + nand->ecc.read_page = docg4_read_page; + nand->ecc.write_page = docg4_write_page; + nand->ecc.read_page_raw = docg4_read_page_raw; + nand->ecc.write_page_raw = docg4_write_page_raw; + nand->ecc.read_oob = docg4_read_oob; + nand->ecc.write_oob = docg4_write_oob; + + /* + * The way the nand infrastructure code is written, a memory-based bbt + * is not created if NAND_SKIP_BBTSCAN is set. With no memory bbt, + * nand->block_bad() is used. So when ignoring bad blocks, we skip the + * scan and define a dummy block_bad() which always returns 0. + */ + if (ignore_badblocks) { + nand->options |= NAND_SKIP_BBTSCAN; + nand->block_bad = docg4_block_neverbad; + } + +} + +static int __init read_id_reg(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = doc->virtadr; + uint16_t id1, id2; + + /* check for presence of g4 chip by reading id registers */ + id1 = readw(docptr + DOC_CHIPID); + id1 = readw(docptr + DOCG4_MYSTERY_REG); + id2 = readw(docptr + DOC_CHIPID_INV); + id2 = readw(docptr + DOCG4_MYSTERY_REG); + + if (id1 == DOCG4_IDREG1_VALUE && id2 == DOCG4_IDREG2_VALUE) { + dev_info(doc->dev, + "NAND device: 128MiB Diskonchip G4 detected\n"); + return 0; + } + + return -ENODEV; +} + +static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL }; + +static int __init probe_docg4(struct platform_device *pdev) +{ + struct mtd_info *mtd; + struct nand_chip *nand; + void __iomem *virtadr; + struct docg4_priv *doc; + int len, retval; + struct resource *r; + struct device *dev = &pdev->dev; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(dev, "no io memory resource defined!\n"); + return -ENODEV; + } + + virtadr = ioremap(r->start, resource_size(r)); + if (!virtadr) { + dev_err(dev, "Diskonchip ioremap failed: %pR\n", r); + return -EIO; + } + + len = sizeof(struct mtd_info) + sizeof(struct nand_chip) + + sizeof(struct docg4_priv); + mtd = kzalloc(len, GFP_KERNEL); + if (mtd == NULL) { + retval = -ENOMEM; + goto fail; + } + nand = (struct nand_chip *) (mtd + 1); + doc = (struct docg4_priv *) (nand + 1); + mtd->priv = nand; + nand->priv = doc; + mtd->owner = THIS_MODULE; + doc->virtadr = virtadr; + doc->dev = dev; + + init_mtd_structs(mtd); + + /* initialize kernel bch algorithm */ + doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY); + if (doc->bch == NULL) { + retval = -EINVAL; + goto fail; + } + + platform_set_drvdata(pdev, doc); + + reset(mtd); + retval = read_id_reg(mtd); + if (retval == -ENODEV) { + dev_warn(dev, "No diskonchip G4 device found.\n"); + goto fail; + } + + retval = nand_scan_tail(mtd); + if (retval) + goto fail; + + retval = read_factory_bbt(mtd); + if (retval) + goto fail; + + retval = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0); + if (retval) + goto fail; + + doc->mtd = mtd; + return 0; + + fail: + iounmap(virtadr); + if (mtd) { + /* re-declarations avoid compiler warning */ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + nand_release(mtd); /* deletes partitions and mtd devices */ + platform_set_drvdata(pdev, NULL); + free_bch(doc->bch); + kfree(mtd); + } + + return retval; +} + +static int __exit cleanup_docg4(struct platform_device *pdev) +{ + struct docg4_priv *doc = platform_get_drvdata(pdev); + nand_release(doc->mtd); + platform_set_drvdata(pdev, NULL); + free_bch(doc->bch); + kfree(doc->mtd); + iounmap(doc->virtadr); + return 0; +} + +static struct platform_driver docg4_driver = { + .driver = { + .name = "docg4", + .owner = THIS_MODULE, + }, + .suspend = docg4_suspend, + .resume = docg4_resume, + .remove = __exit_p(cleanup_docg4), +}; + +static int __init docg4_init(void) +{ + return platform_driver_probe(&docg4_driver, probe_docg4); +} + +static void __exit docg4_exit(void) +{ + platform_driver_unregister(&docg4_driver); +} + +module_init(docg4_init); +module_exit(docg4_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mike Dunn"); +MODULE_DESCRIPTION("M-Systems DiskOnChip G4 device driver"); diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 7195ee6..80b5264 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -813,6 +813,12 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0; chip->ecc.size = 512; chip->ecc.bytes = 3; + chip->ecc.strength = 1; + /* + * FIXME: can hardware ecc correct 4 bitflips if page size is + * 2k? Then does hardware report number of corrections for this + * case? If so, ecc_stats reporting needs to be fixed as well. + */ } else { /* otherwise fall back to default software ECC */ chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index e53b760..1b8330e 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -17,6 +17,10 @@ */ #include <linux/clk.h> +#include <linux/completion.h> +#include <linux/dmaengine.h> +#include <linux/dma-direction.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/init.h> #include <linux/module.h> @@ -27,6 +31,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/slab.h> @@ -34,7 +39,7 @@ #include <linux/amba/bus.h> #include <mtd/mtd-abi.h> -static struct nand_ecclayout fsmc_ecc1_layout = { +static struct nand_ecclayout fsmc_ecc1_128_layout = { .eccbytes = 24, .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52, 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116}, @@ -50,7 +55,127 @@ static struct nand_ecclayout fsmc_ecc1_layout = { } }; -static struct nand_ecclayout fsmc_ecc4_lp_layout = { +static struct nand_ecclayout fsmc_ecc1_64_layout = { + .eccbytes = 12, + .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52}, + .oobfree = { + {.offset = 8, .length = 8}, + {.offset = 24, .length = 8}, + {.offset = 40, .length = 8}, + {.offset = 56, .length = 8}, + } +}; + +static struct nand_ecclayout fsmc_ecc1_16_layout = { + .eccbytes = 3, + .eccpos = {2, 3, 4}, + .oobfree = { + {.offset = 8, .length = 8}, + } +}; + +/* + * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes + * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46 + * bytes are free for use. + */ +static struct nand_ecclayout fsmc_ecc4_256_layout = { + .eccbytes = 208, + .eccpos = { 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 14, + 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, + 34, 35, 36, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, + 50, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, + 66, 67, 68, 69, 70, 71, 72, + 73, 74, 75, 76, 77, 78, + 82, 83, 84, 85, 86, 87, 88, + 89, 90, 91, 92, 93, 94, + 98, 99, 100, 101, 102, 103, 104, + 105, 106, 107, 108, 109, 110, + 114, 115, 116, 117, 118, 119, 120, + 121, 122, 123, 124, 125, 126, + 130, 131, 132, 133, 134, 135, 136, + 137, 138, 139, 140, 141, 142, + 146, 147, 148, 149, 150, 151, 152, + 153, 154, 155, 156, 157, 158, + 162, 163, 164, 165, 166, 167, 168, + 169, 170, 171, 172, 173, 174, + 178, 179, 180, 181, 182, 183, 184, + 185, 186, 187, 188, 189, 190, + 194, 195, 196, 197, 198, 199, 200, + 201, 202, 203, 204, 205, 206, + 210, 211, 212, 213, 214, 215, 216, + 217, 218, 219, 220, 221, 222, + 226, 227, 228, 229, 230, 231, 232, + 233, 234, 235, 236, 237, 238, + 242, 243, 244, 245, 246, 247, 248, + 249, 250, 251, 252, 253, 254 + }, + .oobfree = { + {.offset = 15, .length = 3}, + {.offset = 31, .length = 3}, + {.offset = 47, .length = 3}, + {.offset = 63, .length = 3}, + {.offset = 79, .length = 3}, + {.offset = 95, .length = 3}, + {.offset = 111, .length = 3}, + {.offset = 127, .length = 3}, + {.offset = 143, .length = 3}, + {.offset = 159, .length = 3}, + {.offset = 175, .length = 3}, + {.offset = 191, .length = 3}, + {.offset = 207, .length = 3}, + {.offset = 223, .length = 3}, + {.offset = 239, .length = 3}, + {.offset = 255, .length = 1} + } +}; + +/* + * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes + * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118 + * bytes are free for use. + */ +static struct nand_ecclayout fsmc_ecc4_224_layout = { + .eccbytes = 104, + .eccpos = { 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 14, + 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, + 34, 35, 36, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, + 50, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, + 66, 67, 68, 69, 70, 71, 72, + 73, 74, 75, 76, 77, 78, + 82, 83, 84, 85, 86, 87, 88, + 89, 90, 91, 92, 93, 94, + 98, 99, 100, 101, 102, 103, 104, + 105, 106, 107, 108, 109, 110, + 114, 115, 116, 117, 118, 119, 120, + 121, 122, 123, 124, 125, 126 + }, + .oobfree = { + {.offset = 15, .length = 3}, + {.offset = 31, .length = 3}, + {.offset = 47, .length = 3}, + {.offset = 63, .length = 3}, + {.offset = 79, .length = 3}, + {.offset = 95, .length = 3}, + {.offset = 111, .length = 3}, + {.offset = 127, .length = 97} + } +}; + +/* + * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes + * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22 + * bytes are free for use. + */ +static struct nand_ecclayout fsmc_ecc4_128_layout = { .eccbytes = 104, .eccpos = { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, @@ -82,6 +207,45 @@ static struct nand_ecclayout fsmc_ecc4_lp_layout = { }; /* + * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of + * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10 + * bytes are free for use. + */ +static struct nand_ecclayout fsmc_ecc4_64_layout = { + .eccbytes = 52, + .eccpos = { 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 14, + 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, + 34, 35, 36, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, + 50, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, + }, + .oobfree = { + {.offset = 15, .length = 3}, + {.offset = 31, .length = 3}, + {.offset = 47, .length = 3}, + {.offset = 63, .length = 1}, + } +}; + +/* + * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of + * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One + * byte is free for use. + */ +static struct nand_ecclayout fsmc_ecc4_16_layout = { + .eccbytes = 13, + .eccpos = { 0, 1, 2, 3, 6, 7, 8, + 9, 10, 11, 12, 13, 14 + }, + .oobfree = { + {.offset = 15, .length = 1}, + } +}; + +/* * ECC placement definitions in oobfree type format. * There are 13 bytes of ecc for every 512 byte block and it has to be read * consecutively and immediately after the 512 byte data block for hardware to @@ -103,16 +267,6 @@ static struct fsmc_eccplace fsmc_ecc4_lp_place = { } }; -static struct nand_ecclayout fsmc_ecc4_sp_layout = { - .eccbytes = 13, - .eccpos = { 0, 1, 2, 3, 6, 7, 8, - 9, 10, 11, 12, 13, 14 - }, - .oobfree = { - {.offset = 15, .length = 1}, - } -}; - static struct fsmc_eccplace fsmc_ecc4_sp_place = { .eccplace = { {.offset = 0, .length = 4}, @@ -120,75 +274,24 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = { } }; -/* - * Default partition tables to be used if the partition information not - * provided through platform data. - * - * Default partition layout for small page(= 512 bytes) devices - * Size for "Root file system" is updated in driver based on actual device size - */ -static struct mtd_partition partition_info_16KB_blk[] = { - { - .name = "X-loader", - .offset = 0, - .size = 4*0x4000, - }, - { - .name = "U-Boot", - .offset = 0x10000, - .size = 20*0x4000, - }, - { - .name = "Kernel", - .offset = 0x60000, - .size = 256*0x4000, - }, - { - .name = "Root File System", - .offset = 0x460000, - .size = MTDPART_SIZ_FULL, - }, -}; - -/* - * Default partition layout for large page(> 512 bytes) devices - * Size for "Root file system" is updated in driver based on actual device size - */ -static struct mtd_partition partition_info_128KB_blk[] = { - { - .name = "X-loader", - .offset = 0, - .size = 4*0x20000, - }, - { - .name = "U-Boot", - .offset = 0x80000, - .size = 12*0x20000, - }, - { - .name = "Kernel", - .offset = 0x200000, - .size = 48*0x20000, - }, - { - .name = "Root File System", - .offset = 0x800000, - .size = MTDPART_SIZ_FULL, - }, -}; - - /** * struct fsmc_nand_data - structure for FSMC NAND device state * * @pid: Part ID on the AMBA PrimeCell format * @mtd: MTD info for a NAND flash. * @nand: Chip related info for a NAND flash. + * @partitions: Partition info for a NAND Flash. + * @nr_partitions: Total number of partition of a NAND flash. * * @ecc_place: ECC placing locations in oobfree type format. * @bank: Bank number for probed device. * @clk: Clock structure for FSMC. * + * @read_dma_chan: DMA channel for read access + * @write_dma_chan: DMA channel for write access to NAND + * @dma_access_complete: Completion structure + * + * @data_pa: NAND Physical port for Data. * @data_va: NAND port for Data. * @cmd_va: NAND port for Command. * @addr_va: NAND port for Address. @@ -198,16 +301,23 @@ struct fsmc_nand_data { u32 pid; struct mtd_info mtd; struct nand_chip nand; + struct mtd_partition *partitions; + unsigned int nr_partitions; struct fsmc_eccplace *ecc_place; unsigned int bank; + struct device *dev; + enum access_mode mode; struct clk *clk; - struct resource *resregs; - struct resource *rescmd; - struct resource *resaddr; - struct resource *resdata; + /* DMA related objects */ + struct dma_chan *read_dma_chan; + struct dma_chan *write_dma_chan; + struct completion dma_access_complete; + + struct fsmc_nand_timings *dev_timings; + dma_addr_t data_pa; void __iomem *data_va; void __iomem *cmd_va; void __iomem *addr_va; @@ -251,28 +361,29 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) struct nand_chip *this = mtd->priv; struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void *__iomem *regs = host->regs_va; unsigned int bank = host->bank; if (ctrl & NAND_CTRL_CHANGE) { + u32 pc; + if (ctrl & NAND_CLE) { - this->IO_ADDR_R = (void __iomem *)host->cmd_va; - this->IO_ADDR_W = (void __iomem *)host->cmd_va; + this->IO_ADDR_R = host->cmd_va; + this->IO_ADDR_W = host->cmd_va; } else if (ctrl & NAND_ALE) { - this->IO_ADDR_R = (void __iomem *)host->addr_va; - this->IO_ADDR_W = (void __iomem *)host->addr_va; + this->IO_ADDR_R = host->addr_va; + this->IO_ADDR_W = host->addr_va; } else { - this->IO_ADDR_R = (void __iomem *)host->data_va; - this->IO_ADDR_W = (void __iomem *)host->data_va; + this->IO_ADDR_R = host->data_va; + this->IO_ADDR_W = host->data_va; } - if (ctrl & NAND_NCE) { - writel(readl(®s->bank_regs[bank].pc) | FSMC_ENABLE, - ®s->bank_regs[bank].pc); - } else { - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ENABLE, - ®s->bank_regs[bank].pc); - } + pc = readl(FSMC_NAND_REG(regs, bank, PC)); + if (ctrl & NAND_NCE) + pc |= FSMC_ENABLE; + else + pc &= ~FSMC_ENABLE; + writel(pc, FSMC_NAND_REG(regs, bank, PC)); } mb(); @@ -287,22 +398,42 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) * This routine initializes timing parameters related to NAND memory access in * FSMC registers */ -static void __init fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank, - uint32_t busw) +static void fsmc_nand_setup(void __iomem *regs, uint32_t bank, + uint32_t busw, struct fsmc_nand_timings *timings) { uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON; + uint32_t tclr, tar, thiz, thold, twait, tset; + struct fsmc_nand_timings *tims; + struct fsmc_nand_timings default_timings = { + .tclr = FSMC_TCLR_1, + .tar = FSMC_TAR_1, + .thiz = FSMC_THIZ_1, + .thold = FSMC_THOLD_4, + .twait = FSMC_TWAIT_6, + .tset = FSMC_TSET_0, + }; + + if (timings) + tims = timings; + else + tims = &default_timings; + + tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT; + tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT; + thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT; + thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT; + twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT; + tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT; if (busw) - writel(value | FSMC_DEVWID_16, ®s->bank_regs[bank].pc); + writel(value | FSMC_DEVWID_16, FSMC_NAND_REG(regs, bank, PC)); else - writel(value | FSMC_DEVWID_8, ®s->bank_regs[bank].pc); - - writel(readl(®s->bank_regs[bank].pc) | FSMC_TCLR_1 | FSMC_TAR_1, - ®s->bank_regs[bank].pc); - writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0, - ®s->bank_regs[bank].comm); - writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0, - ®s->bank_regs[bank].attrib); + writel(value | FSMC_DEVWID_8, FSMC_NAND_REG(regs, bank, PC)); + + writel(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar, + FSMC_NAND_REG(regs, bank, PC)); + writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, COMM)); + writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, ATTRIB)); } /* @@ -312,15 +443,15 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode) { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ECCPLEN_256, - ®s->bank_regs[bank].pc); - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ECCEN, - ®s->bank_regs[bank].pc); - writel(readl(®s->bank_regs[bank].pc) | FSMC_ECCEN, - ®s->bank_regs[bank].pc); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256, + FSMC_NAND_REG(regs, bank, PC)); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN, + FSMC_NAND_REG(regs, bank, PC)); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN, + FSMC_NAND_REG(regs, bank, PC)); } /* @@ -333,37 +464,42 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; uint32_t ecc_tmp; unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT; do { - if (readl(®s->bank_regs[bank].sts) & FSMC_CODE_RDY) + if (readl(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY) break; else cond_resched(); } while (!time_after_eq(jiffies, deadline)); - ecc_tmp = readl(®s->bank_regs[bank].ecc1); + if (time_after_eq(jiffies, deadline)) { + dev_err(host->dev, "calculate ecc timed out\n"); + return -ETIMEDOUT; + } + + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1)); ecc[0] = (uint8_t) (ecc_tmp >> 0); ecc[1] = (uint8_t) (ecc_tmp >> 8); ecc[2] = (uint8_t) (ecc_tmp >> 16); ecc[3] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].ecc2); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC2)); ecc[4] = (uint8_t) (ecc_tmp >> 0); ecc[5] = (uint8_t) (ecc_tmp >> 8); ecc[6] = (uint8_t) (ecc_tmp >> 16); ecc[7] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].ecc3); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC3)); ecc[8] = (uint8_t) (ecc_tmp >> 0); ecc[9] = (uint8_t) (ecc_tmp >> 8); ecc[10] = (uint8_t) (ecc_tmp >> 16); ecc[11] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].sts); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, STS)); ecc[12] = (uint8_t) (ecc_tmp >> 16); return 0; @@ -379,11 +515,11 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; uint32_t ecc_tmp; - ecc_tmp = readl(®s->bank_regs[bank].ecc1); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1)); ecc[0] = (uint8_t) (ecc_tmp >> 0); ecc[1] = (uint8_t) (ecc_tmp >> 8); ecc[2] = (uint8_t) (ecc_tmp >> 16); @@ -391,6 +527,166 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, return 0; } +/* Count the number of 0's in buff upto a max of max_bits */ +static int count_written_bits(uint8_t *buff, int size, int max_bits) +{ + int k, written_bits = 0; + + for (k = 0; k < size; k++) { + written_bits += hweight8(~buff[k]); + if (written_bits > max_bits) + break; + } + + return written_bits; +} + +static void dma_complete(void *param) +{ + struct fsmc_nand_data *host = param; + + complete(&host->dma_access_complete); +} + +static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len, + enum dma_data_direction direction) +{ + struct dma_chan *chan; + struct dma_device *dma_dev; + struct dma_async_tx_descriptor *tx; + dma_addr_t dma_dst, dma_src, dma_addr; + dma_cookie_t cookie; + unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; + int ret; + + if (direction == DMA_TO_DEVICE) + chan = host->write_dma_chan; + else if (direction == DMA_FROM_DEVICE) + chan = host->read_dma_chan; + else + return -EINVAL; + + dma_dev = chan->device; + dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction); + + if (direction == DMA_TO_DEVICE) { + dma_src = dma_addr; + dma_dst = host->data_pa; + flags |= DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_SKIP_DEST_UNMAP; + } else { + dma_src = host->data_pa; + dma_dst = dma_addr; + flags |= DMA_COMPL_DEST_UNMAP_SINGLE | DMA_COMPL_SKIP_SRC_UNMAP; + } + + tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src, + len, flags); + + if (!tx) { + dev_err(host->dev, "device_prep_dma_memcpy error\n"); + dma_unmap_single(dma_dev->dev, dma_addr, len, direction); + return -EIO; + } + + tx->callback = dma_complete; + tx->callback_param = host; + cookie = tx->tx_submit(tx); + + ret = dma_submit_error(cookie); + if (ret) { + dev_err(host->dev, "dma_submit_error %d\n", cookie); + return ret; + } + + dma_async_issue_pending(chan); + + ret = + wait_for_completion_interruptible_timeout(&host->dma_access_complete, + msecs_to_jiffies(3000)); + if (ret <= 0) { + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dev_err(host->dev, "wait_for_completion_timeout\n"); + return ret ? ret : -ETIMEDOUT; + } + + return 0; +} + +/* + * fsmc_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + struct nand_chip *chip = mtd->priv; + + if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) && + IS_ALIGNED(len, sizeof(uint32_t))) { + uint32_t *p = (uint32_t *)buf; + len = len >> 2; + for (i = 0; i < len; i++) + writel(p[i], chip->IO_ADDR_W); + } else { + for (i = 0; i < len; i++) + writeb(buf[i], chip->IO_ADDR_W); + } +} + +/* + * fsmc_read_buf - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + struct nand_chip *chip = mtd->priv; + + if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) && + IS_ALIGNED(len, sizeof(uint32_t))) { + uint32_t *p = (uint32_t *)buf; + len = len >> 2; + for (i = 0; i < len; i++) + p[i] = readl(chip->IO_ADDR_R); + } else { + for (i = 0; i < len; i++) + buf[i] = readb(chip->IO_ADDR_R); + } +} + +/* + * fsmc_read_buf_dma - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct fsmc_nand_data *host; + + host = container_of(mtd, struct fsmc_nand_data, mtd); + dma_xfer(host, buf, len, DMA_FROM_DEVICE); +} + +/* + * fsmc_write_buf_dma - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + struct fsmc_nand_data *host; + + host = container_of(mtd, struct fsmc_nand_data, mtd); + dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE); +} + /* * fsmc_read_page_hwecc * @mtd: mtd info structure @@ -426,7 +722,6 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *oob = (uint8_t *)&ecc_oob[0]; for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) { - chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page); chip->ecc.hwctl(mtd, NAND_ECC_READ); chip->read_buf(mtd, p, eccsize); @@ -437,17 +732,19 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, group++; /* - * length is intentionally kept a higher multiple of 2 - * to read at least 13 bytes even in case of 16 bit NAND - * devices - */ - len = roundup(len, 2); + * length is intentionally kept a higher multiple of 2 + * to read at least 13 bytes even in case of 16 bit NAND + * devices + */ + if (chip->options & NAND_BUSWIDTH_16) + len = roundup(len, 2); + chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page); chip->read_buf(mtd, oob + j, len); j += len; } - memcpy(&ecc_code[i], oob, 13); + memcpy(&ecc_code[i], oob, chip->ecc.bytes); chip->ecc.calculate(mtd, p, &ecc_calc[i]); stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); @@ -461,7 +758,7 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, } /* - * fsmc_correct_data + * fsmc_bch8_correct_data * @mtd: mtd info structure * @dat: buffer of read data * @read_ecc: ecc read from device spare area @@ -470,19 +767,51 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * calc_ecc is a 104 bit information containing maximum of 8 error * offset informations of 13 bits each in 512 bytes of read data. */ -static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat, +static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + struct nand_chip *chip = mtd->priv; + void __iomem *regs = host->regs_va; unsigned int bank = host->bank; - uint16_t err_idx[8]; - uint64_t ecc_data[2]; + uint32_t err_idx[8]; uint32_t num_err, i; + uint32_t ecc1, ecc2, ecc3, ecc4; + + num_err = (readl(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF; + + /* no bit flipping */ + if (likely(num_err == 0)) + return 0; + + /* too many errors */ + if (unlikely(num_err > 8)) { + /* + * This is a temporary erase check. A newly erased page read + * would result in an ecc error because the oob data is also + * erased to FF and the calculated ecc for an FF data is not + * FF..FF. + * This is a workaround to skip performing correction in case + * data is FF..FF + * + * Logic: + * For every page, each bit written as 0 is counted until these + * number of bits are greater than 8 (the maximum correction + * capability of FSMC for each 512 + 13 bytes) + */ + + int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8); + int bits_data = count_written_bits(dat, chip->ecc.size, 8); + + if ((bits_ecc + bits_data) <= 8) { + if (bits_data) + memset(dat, 0xff, chip->ecc.size); + return bits_data; + } - /* The calculated ecc is actually the correction index in data */ - memcpy(ecc_data, calc_ecc, 13); + return -EBADMSG; + } /* * ------------------- calc_ecc[] bit wise -----------|--13 bits--| @@ -493,27 +822,26 @@ static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat, * uint64_t array and error offset indexes are populated in err_idx * array */ - for (i = 0; i < 8; i++) { - if (i == 4) { - err_idx[4] = ((ecc_data[1] & 0x1) << 12) | ecc_data[0]; - ecc_data[1] >>= 1; - continue; - } - err_idx[i] = (ecc_data[i/4] & 0x1FFF); - ecc_data[i/4] >>= 13; - } - - num_err = (readl(®s->bank_regs[bank].sts) >> 10) & 0xF; - - if (num_err == 0xF) - return -EBADMSG; + ecc1 = readl(FSMC_NAND_REG(regs, bank, ECC1)); + ecc2 = readl(FSMC_NAND_REG(regs, bank, ECC2)); + ecc3 = readl(FSMC_NAND_REG(regs, bank, ECC3)); + ecc4 = readl(FSMC_NAND_REG(regs, bank, STS)); + + err_idx[0] = (ecc1 >> 0) & 0x1FFF; + err_idx[1] = (ecc1 >> 13) & 0x1FFF; + err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F); + err_idx[3] = (ecc2 >> 7) & 0x1FFF; + err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF); + err_idx[5] = (ecc3 >> 1) & 0x1FFF; + err_idx[6] = (ecc3 >> 14) & 0x1FFF; + err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F); i = 0; while (num_err--) { change_bit(0, (unsigned long *)&err_idx[i]); change_bit(1, (unsigned long *)&err_idx[i]); - if (err_idx[i] <= 512 * 8) { + if (err_idx[i] < chip->ecc.size * 8) { change_bit(err_idx[i], (unsigned long *)dat); i++; } @@ -521,6 +849,44 @@ static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat, return i; } +static bool filter(struct dma_chan *chan, void *slave) +{ + chan->private = slave; + return true; +} + +#ifdef CONFIG_OF +static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + u32 val; + + /* Set default NAND width to 8 bits */ + pdata->width = 8; + if (!of_property_read_u32(np, "bank-width", &val)) { + if (val == 2) { + pdata->width = 16; + } else if (val != 1) { + dev_err(&pdev->dev, "invalid bank-width %u\n", val); + return -EINVAL; + } + } + of_property_read_u32(np, "st,ale-off", &pdata->ale_off); + of_property_read_u32(np, "st,cle-off", &pdata->cle_off); + if (of_get_property(np, "nand-skip-bbtscan", NULL)) + pdata->options = NAND_SKIP_BBTSCAN; + + return 0; +} +#else +static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + return -ENOSYS; +} +#endif + /* * fsmc_nand_probe - Probe function * @pdev: platform device structure @@ -528,102 +894,109 @@ static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat, static int __init fsmc_nand_probe(struct platform_device *pdev) { struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node __maybe_unused *np = pdev->dev.of_node; + struct mtd_part_parser_data ppdata = {}; struct fsmc_nand_data *host; struct mtd_info *mtd; struct nand_chip *nand; - struct fsmc_regs *regs; struct resource *res; + dma_cap_mask_t mask; int ret = 0; u32 pid; int i; + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + pdev->dev.platform_data = pdata; + ret = fsmc_nand_probe_config_dt(pdev, np); + if (ret) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENODEV; + } + } + if (!pdata) { dev_err(&pdev->dev, "platform data is NULL\n"); return -EINVAL; } /* Allocate memory for the device structure (and zero it) */ - host = kzalloc(sizeof(*host), GFP_KERNEL); + host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); if (!host) { dev_err(&pdev->dev, "failed to allocate device structure\n"); return -ENOMEM; } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); - if (!res) { - ret = -EIO; - goto err_probe1; - } + if (!res) + return -EINVAL; - host->resdata = request_mem_region(res->start, resource_size(res), - pdev->name); - if (!host->resdata) { - ret = -EIO; - goto err_probe1; + if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) { + dev_err(&pdev->dev, "Failed to get memory data resourse\n"); + return -ENOENT; } - host->data_va = ioremap(res->start, resource_size(res)); + host->data_pa = (dma_addr_t)res->start; + host->data_va = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (!host->data_va) { - ret = -EIO; - goto err_probe1; + dev_err(&pdev->dev, "data ioremap failed\n"); + return -ENOMEM; } - host->resaddr = request_mem_region(res->start + PLAT_NAND_ALE, - resource_size(res), pdev->name); - if (!host->resaddr) { - ret = -EIO; - goto err_probe1; + if (!devm_request_mem_region(&pdev->dev, res->start + pdata->ale_off, + resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "Failed to get memory ale resourse\n"); + return -ENOENT; } - host->addr_va = ioremap(res->start + PLAT_NAND_ALE, resource_size(res)); + host->addr_va = devm_ioremap(&pdev->dev, res->start + pdata->ale_off, + resource_size(res)); if (!host->addr_va) { - ret = -EIO; - goto err_probe1; + dev_err(&pdev->dev, "ale ioremap failed\n"); + return -ENOMEM; } - host->rescmd = request_mem_region(res->start + PLAT_NAND_CLE, - resource_size(res), pdev->name); - if (!host->rescmd) { - ret = -EIO; - goto err_probe1; + if (!devm_request_mem_region(&pdev->dev, res->start + pdata->cle_off, + resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "Failed to get memory cle resourse\n"); + return -ENOENT; } - host->cmd_va = ioremap(res->start + PLAT_NAND_CLE, resource_size(res)); + host->cmd_va = devm_ioremap(&pdev->dev, res->start + pdata->cle_off, + resource_size(res)); if (!host->cmd_va) { - ret = -EIO; - goto err_probe1; + dev_err(&pdev->dev, "ale ioremap failed\n"); + return -ENOMEM; } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs"); - if (!res) { - ret = -EIO; - goto err_probe1; - } + if (!res) + return -EINVAL; - host->resregs = request_mem_region(res->start, resource_size(res), - pdev->name); - if (!host->resregs) { - ret = -EIO; - goto err_probe1; + if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) { + dev_err(&pdev->dev, "Failed to get memory regs resourse\n"); + return -ENOENT; } - host->regs_va = ioremap(res->start, resource_size(res)); + host->regs_va = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (!host->regs_va) { - ret = -EIO; - goto err_probe1; + dev_err(&pdev->dev, "regs ioremap failed\n"); + return -ENOMEM; } host->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "failed to fetch block clock\n"); - ret = PTR_ERR(host->clk); - host->clk = NULL; - goto err_probe1; + return PTR_ERR(host->clk); } ret = clk_enable(host->clk); if (ret) - goto err_probe1; + goto err_clk_enable; /* * This device ID is actually a common AMBA ID as used on the @@ -639,7 +1012,14 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) host->bank = pdata->bank; host->select_chip = pdata->select_bank; - regs = host->regs_va; + host->partitions = pdata->partitions; + host->nr_partitions = pdata->nr_partitions; + host->dev = &pdev->dev; + host->dev_timings = pdata->nand_timings; + host->mode = pdata->mode; + + if (host->mode == USE_DMA_ACCESS) + init_completion(&host->dma_access_complete); /* Link all private pointers */ mtd = &host->mtd; @@ -658,21 +1038,53 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) nand->ecc.size = 512; nand->options = pdata->options; nand->select_chip = fsmc_select_chip; + nand->badblockbits = 7; if (pdata->width == FSMC_NAND_BW16) nand->options |= NAND_BUSWIDTH_16; - fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16); + switch (host->mode) { + case USE_DMA_ACCESS: + dma_cap_zero(mask); + dma_cap_set(DMA_MEMCPY, mask); + host->read_dma_chan = dma_request_channel(mask, filter, + pdata->read_dma_priv); + if (!host->read_dma_chan) { + dev_err(&pdev->dev, "Unable to get read dma channel\n"); + goto err_req_read_chnl; + } + host->write_dma_chan = dma_request_channel(mask, filter, + pdata->write_dma_priv); + if (!host->write_dma_chan) { + dev_err(&pdev->dev, "Unable to get write dma channel\n"); + goto err_req_write_chnl; + } + nand->read_buf = fsmc_read_buf_dma; + nand->write_buf = fsmc_write_buf_dma; + break; + + default: + case USE_WORD_ACCESS: + nand->read_buf = fsmc_read_buf; + nand->write_buf = fsmc_write_buf; + break; + } + + fsmc_nand_setup(host->regs_va, host->bank, + nand->options & NAND_BUSWIDTH_16, + host->dev_timings); if (AMBA_REV_BITS(host->pid) >= 8) { nand->ecc.read_page = fsmc_read_page_hwecc; nand->ecc.calculate = fsmc_read_hwecc_ecc4; - nand->ecc.correct = fsmc_correct_data; + nand->ecc.correct = fsmc_bch8_correct_data; nand->ecc.bytes = 13; + nand->ecc.strength = 8; } else { nand->ecc.calculate = fsmc_read_hwecc_ecc1; nand->ecc.correct = nand_correct_data; nand->ecc.bytes = 3; + nand->ecc.strength = 1; } /* @@ -681,19 +1093,52 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (nand_scan_ident(&host->mtd, 1, NULL)) { ret = -ENXIO; dev_err(&pdev->dev, "No NAND Device found!\n"); - goto err_probe; + goto err_scan_ident; } if (AMBA_REV_BITS(host->pid) >= 8) { - if (host->mtd.writesize == 512) { - nand->ecc.layout = &fsmc_ecc4_sp_layout; + switch (host->mtd.oobsize) { + case 16: + nand->ecc.layout = &fsmc_ecc4_16_layout; host->ecc_place = &fsmc_ecc4_sp_place; - } else { - nand->ecc.layout = &fsmc_ecc4_lp_layout; + break; + case 64: + nand->ecc.layout = &fsmc_ecc4_64_layout; + host->ecc_place = &fsmc_ecc4_lp_place; + break; + case 128: + nand->ecc.layout = &fsmc_ecc4_128_layout; + host->ecc_place = &fsmc_ecc4_lp_place; + break; + case 224: + nand->ecc.layout = &fsmc_ecc4_224_layout; host->ecc_place = &fsmc_ecc4_lp_place; + break; + case 256: + nand->ecc.layout = &fsmc_ecc4_256_layout; + host->ecc_place = &fsmc_ecc4_lp_place; + break; + default: + printk(KERN_WARNING "No oob scheme defined for " + "oobsize %d\n", mtd->oobsize); + BUG(); } } else { - nand->ecc.layout = &fsmc_ecc1_layout; + switch (host->mtd.oobsize) { + case 16: + nand->ecc.layout = &fsmc_ecc1_16_layout; + break; + case 64: + nand->ecc.layout = &fsmc_ecc1_64_layout; + break; + case 128: + nand->ecc.layout = &fsmc_ecc1_128_layout; + break; + default: + printk(KERN_WARNING "No oob scheme defined for " + "oobsize %d\n", mtd->oobsize); + BUG(); + } } /* Second stage of scan to fill MTD data-structures */ @@ -713,13 +1158,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) * Check for partition info passed */ host->mtd.name = "nand"; - ret = mtd_device_parse_register(&host->mtd, NULL, 0, - host->mtd.size <= 0x04000000 ? - partition_info_16KB_blk : - partition_info_128KB_blk, - host->mtd.size <= 0x04000000 ? - ARRAY_SIZE(partition_info_16KB_blk) : - ARRAY_SIZE(partition_info_128KB_blk)); + ppdata.of_node = np; + ret = mtd_device_parse_register(&host->mtd, NULL, &ppdata, + host->partitions, host->nr_partitions); if (ret) goto err_probe; @@ -728,32 +1169,16 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) return 0; err_probe: +err_scan_ident: + if (host->mode == USE_DMA_ACCESS) + dma_release_channel(host->write_dma_chan); +err_req_write_chnl: + if (host->mode == USE_DMA_ACCESS) + dma_release_channel(host->read_dma_chan); +err_req_read_chnl: clk_disable(host->clk); -err_probe1: - if (host->clk) - clk_put(host->clk); - if (host->regs_va) - iounmap(host->regs_va); - if (host->resregs) - release_mem_region(host->resregs->start, - resource_size(host->resregs)); - if (host->cmd_va) - iounmap(host->cmd_va); - if (host->rescmd) - release_mem_region(host->rescmd->start, - resource_size(host->rescmd)); - if (host->addr_va) - iounmap(host->addr_va); - if (host->resaddr) - release_mem_region(host->resaddr->start, - resource_size(host->resaddr)); - if (host->data_va) - iounmap(host->data_va); - if (host->resdata) - release_mem_region(host->resdata->start, - resource_size(host->resdata)); - - kfree(host); +err_clk_enable: + clk_put(host->clk); return ret; } @@ -768,24 +1193,15 @@ static int fsmc_nand_remove(struct platform_device *pdev) if (host) { nand_release(&host->mtd); + + if (host->mode == USE_DMA_ACCESS) { + dma_release_channel(host->write_dma_chan); + dma_release_channel(host->read_dma_chan); + } clk_disable(host->clk); clk_put(host->clk); - - iounmap(host->regs_va); - release_mem_region(host->resregs->start, - resource_size(host->resregs)); - iounmap(host->cmd_va); - release_mem_region(host->rescmd->start, - resource_size(host->rescmd)); - iounmap(host->addr_va); - release_mem_region(host->resaddr->start, - resource_size(host->resaddr)); - iounmap(host->data_va); - release_mem_region(host->resdata->start, - resource_size(host->resdata)); - - kfree(host); } + return 0; } @@ -801,15 +1217,24 @@ static int fsmc_nand_suspend(struct device *dev) static int fsmc_nand_resume(struct device *dev) { struct fsmc_nand_data *host = dev_get_drvdata(dev); - if (host) + if (host) { clk_enable(host->clk); + fsmc_nand_setup(host->regs_va, host->bank, + host->nand.options & NAND_BUSWIDTH_16, + host->dev_timings); + } return 0; } -static const struct dev_pm_ops fsmc_nand_pm_ops = { - .suspend = fsmc_nand_suspend, - .resume = fsmc_nand_resume, +static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id fsmc_nand_id_table[] = { + { .compatible = "st,spear600-fsmc-nand" }, + {} }; +MODULE_DEVICE_TABLE(of, fsmc_nand_id_table); #endif static struct platform_driver fsmc_nand_driver = { @@ -817,6 +1242,7 @@ static struct platform_driver fsmc_nand_driver = { .driver = { .owner = THIS_MODULE, .name = "fsmc-nand", + .of_match_table = of_match_ptr(fsmc_nand_id_table), #ifdef CONFIG_PM .pm = &fsmc_nand_pm_ops, #endif diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 7db6555..e8ea710 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -835,7 +835,7 @@ int gpmi_send_command(struct gpmi_nand_data *this) | BM_GPMI_CTRL0_ADDRESS_INCREMENT | BF_GPMI_CTRL0_XFER_COUNT(this->command_length); pio[1] = pio[2] = 0; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); if (!desc) { @@ -848,8 +848,10 @@ int gpmi_send_command(struct gpmi_nand_data *this) sg_init_one(sgl, this->cmd_buffer, this->command_length); dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE); - desc = channel->device->device_prep_slave_sg(channel, - sgl, 1, DMA_MEM_TO_DEV, 1); + desc = dmaengine_prep_slave_sg(channel, + sgl, 1, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { pr_err("step 2 error\n"); return -1; @@ -880,8 +882,7 @@ int gpmi_send_data(struct gpmi_nand_data *this) | BF_GPMI_CTRL0_ADDRESS(address) | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len); pio[1] = 0; - desc = channel->device->device_prep_slave_sg(channel, - (struct scatterlist *)pio, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); if (!desc) { pr_err("step 1 error\n"); @@ -890,8 +891,9 @@ int gpmi_send_data(struct gpmi_nand_data *this) /* [2] send DMA request */ prepare_data_dma(this, DMA_TO_DEVICE); - desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_MEM_TO_DEV, 1); + desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, + 1, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -916,7 +918,7 @@ int gpmi_read_data(struct gpmi_nand_data *this) | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA) | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len); pio[1] = 0; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); if (!desc) { @@ -926,8 +928,9 @@ int gpmi_read_data(struct gpmi_nand_data *this) /* [2] : send DMA request */ prepare_data_dma(this, DMA_FROM_DEVICE); - desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_DEV_TO_MEM, 1); + desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, + 1, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -972,9 +975,10 @@ int gpmi_send_page(struct gpmi_nand_data *this, pio[4] = payload; pio[5] = auxiliary; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); + ARRAY_SIZE(pio), DMA_TRANS_NONE, + DMA_CTRL_ACK); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -1007,7 +1011,7 @@ int gpmi_read_page(struct gpmi_nand_data *this, | BF_GPMI_CTRL0_ADDRESS(address) | BF_GPMI_CTRL0_XFER_COUNT(0); pio[1] = 0; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, 2, DMA_TRANS_NONE, 0); if (!desc) { @@ -1036,9 +1040,10 @@ int gpmi_read_page(struct gpmi_nand_data *this, pio[3] = geo->page_size; pio[4] = payload; pio[5] = auxiliary; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, - ARRAY_SIZE(pio), DMA_TRANS_NONE, 1); + ARRAY_SIZE(pio), DMA_TRANS_NONE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -1055,9 +1060,11 @@ int gpmi_read_page(struct gpmi_nand_data *this, | BF_GPMI_CTRL0_ADDRESS(address) | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size); pio[1] = 0; - desc = channel->device->device_prep_slave_sg(channel, - (struct scatterlist *)pio, 2, - DMA_TRANS_NONE, 1); + pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */ + desc = dmaengine_prep_slave_sg(channel, + (struct scatterlist *)pio, 3, + DMA_TRANS_NONE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { pr_err("step 3 error\n"); return -1; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 493ec2f..75b1dde 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1124,7 +1124,7 @@ static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ - if (chip->options & NAND_BBT_USE_FLASH) + if (chip->bbt_options & NAND_BBT_USE_FLASH) ret = nand_update_bbt(mtd, ofs); else { chipnr = (int)(ofs >> chip->chip_shift); @@ -1155,7 +1155,7 @@ static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs) return ret; } -static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this) +static int nand_boot_set_geometry(struct gpmi_nand_data *this) { struct boot_rom_geometry *geometry = &this->rom_geometry; @@ -1182,7 +1182,7 @@ static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this) } static const char *fingerprint = "STMP"; -static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this) +static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) { struct boot_rom_geometry *rom_geo = &this->rom_geometry; struct device *dev = this->dev; @@ -1239,7 +1239,7 @@ static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this) } /* Writes a transcription stamp. */ -static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this) +static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) { struct device *dev = this->dev; struct boot_rom_geometry *rom_geo = &this->rom_geometry; @@ -1322,7 +1322,7 @@ static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this) return 0; } -static int __devinit mx23_boot_init(struct gpmi_nand_data *this) +static int mx23_boot_init(struct gpmi_nand_data *this) { struct device *dev = this->dev; struct nand_chip *chip = &this->nand; @@ -1391,7 +1391,7 @@ static int __devinit mx23_boot_init(struct gpmi_nand_data *this) return 0; } -static int __devinit nand_boot_init(struct gpmi_nand_data *this) +static int nand_boot_init(struct gpmi_nand_data *this) { nand_boot_set_geometry(this); @@ -1401,7 +1401,7 @@ static int __devinit nand_boot_init(struct gpmi_nand_data *this) return 0; } -static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this) +static int gpmi_set_geometry(struct gpmi_nand_data *this) { int ret; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index e023bcc..ec6180d 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -20,7 +20,7 @@ #include <linux/mtd/nand.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/dma.h> +#include <linux/fsl/mxs-dma.h> struct resources { void *gpmi_regs; diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c index 5dc6f0d..11e4878 100644 --- a/drivers/mtd/nand/h1910.c +++ b/drivers/mtd/nand/h1910.c @@ -135,8 +135,8 @@ static int __init h1910_init(void) } /* Register the partitions */ - mtd_device_parse_register(h1910_nand_mtd, NULL, 0, - partition_info, NUM_PARTITIONS); + mtd_device_parse_register(h1910_nand_mtd, NULL, NULL, partition_info, + NUM_PARTITIONS); /* Return happy */ return 0; diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index ac3b9f2..e4147e8 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -332,6 +332,11 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) chip->ecc.mode = NAND_ECC_HW_OOB_FIRST; chip->ecc.size = 512; chip->ecc.bytes = 9; + chip->ecc.strength = 2; + /* + * FIXME: ecc_strength value of 2 bits per 512 bytes of data is a + * conservative guess, given 9 ecc bytes and reed-solomon alg. + */ if (pdata) chip->ecc.layout = pdata->ecc_layout; @@ -367,9 +372,9 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) goto err_gpio_free; } - ret = mtd_device_parse_register(mtd, NULL, 0, - pdata ? pdata->partitions : NULL, - pdata ? pdata->num_partitions : 0); + ret = mtd_device_parse_register(mtd, NULL, NULL, + pdata ? pdata->partitions : NULL, + pdata ? pdata->num_partitions : 0); if (ret) { dev_err(&pdev->dev, "Failed to add mtd device\n"); diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 74a43b8..cc0678a 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1225,9 +1225,16 @@ static int __init mxcnd_probe(struct platform_device *pdev) goto escan; } + if (this->ecc.mode == NAND_ECC_HW) { + if (nfc_is_v1()) + this->ecc.strength = 1; + else + this->ecc.strength = (host->eccsize == 4) ? 4 : 8; + } + /* Register the partitions */ - mtd_device_parse_register(mtd, part_probes, 0, - pdata->parts, pdata->nr_parts); + mtd_device_parse_register(mtd, part_probes, NULL, pdata->parts, + pdata->nr_parts); platform_set_drvdata(pdev, host); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 8a393f9..47b19c0 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -123,12 +123,6 @@ static int check_offs_len(struct mtd_info *mtd, ret = -EINVAL; } - /* Do not allow past end of device */ - if (ofs + len > mtd->size) { - pr_debug("%s: past end of device\n", __func__); - ret = -EINVAL; - } - return ret; } @@ -338,7 +332,7 @@ static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) */ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) { - int page, chipnr, res = 0; + int page, chipnr, res = 0, i = 0; struct nand_chip *chip = mtd->priv; u16 bad; @@ -356,23 +350,29 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) chip->select_chip(mtd, chipnr); } - if (chip->options & NAND_BUSWIDTH_16) { - chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE, - page); - bad = cpu_to_le16(chip->read_word(mtd)); - if (chip->badblockpos & 0x1) - bad >>= 8; - else - bad &= 0xFF; - } else { - chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page); - bad = chip->read_byte(mtd); - } + do { + if (chip->options & NAND_BUSWIDTH_16) { + chip->cmdfunc(mtd, NAND_CMD_READOOB, + chip->badblockpos & 0xFE, page); + bad = cpu_to_le16(chip->read_word(mtd)); + if (chip->badblockpos & 0x1) + bad >>= 8; + else + bad &= 0xFF; + } else { + chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, + page); + bad = chip->read_byte(mtd); + } - if (likely(chip->badblockbits == 8)) - res = bad != 0xFF; - else - res = hweight8(bad) < chip->badblockbits; + if (likely(chip->badblockbits == 8)) + res = bad != 0xFF; + else + res = hweight8(bad) < chip->badblockbits; + ofs += mtd->writesize; + page = (int)(ofs >> chip->page_shift) & chip->pagemask; + i++; + } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE)); if (getchip) nand_release_device(mtd); @@ -386,51 +386,79 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) * @ofs: offset from device start * * This is the default implementation, which can be overridden by a hardware - * specific driver. + * specific driver. We try operations in the following order, according to our + * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH): + * (1) erase the affected block, to allow OOB marker to be written cleanly + * (2) update in-memory BBT + * (3) write bad block marker to OOB area of affected block + * (4) update flash-based BBT + * Note that we retain the first error encountered in (3) or (4), finish the + * procedures, and dump the error in the end. */ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd->priv; uint8_t buf[2] = { 0, 0 }; - int block, ret, i = 0; + int block, res, ret = 0, i = 0; + int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM); - if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) - ofs += mtd->erasesize - mtd->writesize; + if (write_oob) { + struct erase_info einfo; + + /* Attempt erase before marking OOB */ + memset(&einfo, 0, sizeof(einfo)); + einfo.mtd = mtd; + einfo.addr = ofs; + einfo.len = 1 << chip->phys_erase_shift; + nand_erase_nand(mtd, &einfo, 0); + } /* Get block number */ block = (int)(ofs >> chip->bbt_erase_shift); + /* Mark block bad in memory-based BBT */ if (chip->bbt) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); - /* Do we have a flash based bad block table? */ - if (chip->bbt_options & NAND_BBT_USE_FLASH) - ret = nand_update_bbt(mtd, ofs); - else { + /* Write bad block marker to OOB */ + if (write_oob) { struct mtd_oob_ops ops; + loff_t wr_ofs = ofs; nand_get_device(chip, mtd, FL_WRITING); - /* - * Write to first two pages if necessary. If we write to more - * than one location, the first error encountered quits the - * procedure. We write two bytes per location, so we dont have - * to mess with 16 bit access. - */ - ops.len = ops.ooblen = 2; ops.datbuf = NULL; ops.oobbuf = buf; - ops.ooboffs = chip->badblockpos & ~0x01; + ops.ooboffs = chip->badblockpos; + if (chip->options & NAND_BUSWIDTH_16) { + ops.ooboffs &= ~0x01; + ops.len = ops.ooblen = 2; + } else { + ops.len = ops.ooblen = 1; + } ops.mode = MTD_OPS_PLACE_OOB; + + /* Write to first/last page(s) if necessary */ + if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) + wr_ofs += mtd->erasesize - mtd->writesize; do { - ret = nand_do_write_oob(mtd, ofs, &ops); + res = nand_do_write_oob(mtd, wr_ofs, &ops); + if (!ret) + ret = res; i++; - ofs += mtd->writesize; - } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && - i < 2); + wr_ofs += mtd->writesize; + } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2); nand_release_device(mtd); } + + /* Update flash-based bad block table */ + if (chip->bbt_options & NAND_BBT_USE_FLASH) { + res = nand_update_bbt(mtd, ofs); + if (!ret) + ret = res; + } + if (!ret) mtd->ecc_stats.badblocks++; @@ -1586,25 +1614,14 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, struct mtd_oob_ops ops; int ret; - /* Do not allow reads past end of device */ - if ((from + len) > mtd->size) - return -EINVAL; - if (!len) - return 0; - nand_get_device(chip, mtd, FL_READING); - ops.len = len; ops.datbuf = buf; ops.oobbuf = NULL; ops.mode = 0; - ret = nand_do_read_ops(mtd, from, &ops); - *retlen = ops.retlen; - nand_release_device(mtd); - return ret; } @@ -2293,12 +2310,6 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, struct mtd_oob_ops ops; int ret; - /* Do not allow reads past end of device */ - if ((to + len) > mtd->size) - return -EINVAL; - if (!len) - return 0; - /* Wait for the device to get ready */ panic_nand_wait(mtd, chip, 400); @@ -2333,25 +2344,14 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, struct mtd_oob_ops ops; int ret; - /* Do not allow reads past end of device */ - if ((to + len) > mtd->size) - return -EINVAL; - if (!len) - return 0; - nand_get_device(chip, mtd, FL_WRITING); - ops.len = len; ops.datbuf = (uint8_t *)buf; ops.oobbuf = NULL; ops.mode = 0; - ret = nand_do_write_ops(mtd, to, &ops); - *retlen = ops.retlen; - nand_release_device(mtd); - return ret; } @@ -2550,8 +2550,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, if (check_offs_len(mtd, instr->addr, instr->len)) return -EINVAL; - instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; - /* Grab the lock and see if the device is available */ nand_get_device(chip, mtd, FL_ERASING); @@ -2715,10 +2713,6 @@ static void nand_sync(struct mtd_info *mtd) */ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) { - /* Check for invalid offset */ - if (offs > mtd->size) - return -EINVAL; - return nand_block_checkbad(mtd, offs, 1, 0); } @@ -2857,7 +2851,6 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') return 0; - pr_info("ONFI flash detected\n"); chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); for (i = 0; i < 3; i++) { chip->read_buf(mtd, (uint8_t *)p, sizeof(*p)); @@ -2898,7 +2891,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, mtd->writesize = le32_to_cpu(p->byte_per_page); mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize; mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); - chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize; + chip->chipsize = le32_to_cpu(p->blocks_per_lun); + chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; *busw = 0; if (le16_to_cpu(p->features) & 1) *busw = NAND_BUSWIDTH_16; @@ -2907,6 +2901,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, chip->options |= (NAND_NO_READRDY | NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK; + pr_info("ONFI flash detected\n"); return 1; } @@ -3238,6 +3233,10 @@ int nand_scan_tail(struct mtd_info *mtd) int i; struct nand_chip *chip = mtd->priv; + /* New bad blocks should be marked in OOB, flash-based BBT, or both */ + BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && + !(chip->bbt_options & NAND_BBT_USE_FLASH)); + if (!(chip->options & NAND_OWN_BUFFERS)) chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL); if (!chip->buffers) @@ -3350,6 +3349,7 @@ int nand_scan_tail(struct mtd_info *mtd) if (!chip->ecc.size) chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; break; case NAND_ECC_SOFT_BCH: @@ -3384,6 +3384,8 @@ int nand_scan_tail(struct mtd_info *mtd) pr_warn("BCH ECC initialization failed!\n"); BUG(); } + chip->ecc.strength = + chip->ecc.bytes*8 / fls(8*chip->ecc.size); break; case NAND_ECC_NONE: @@ -3397,6 +3399,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.write_oob = nand_write_oob_std; chip->ecc.size = mtd->writesize; chip->ecc.bytes = 0; + chip->ecc.strength = 0; break; default: @@ -3461,25 +3464,26 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : MTD_CAP_NANDFLASH; - mtd->erase = nand_erase; - mtd->point = NULL; - mtd->unpoint = NULL; - mtd->read = nand_read; - mtd->write = nand_write; - mtd->panic_write = panic_nand_write; - mtd->read_oob = nand_read_oob; - mtd->write_oob = nand_write_oob; - mtd->sync = nand_sync; - mtd->lock = NULL; - mtd->unlock = NULL; - mtd->suspend = nand_suspend; - mtd->resume = nand_resume; - mtd->block_isbad = nand_block_isbad; - mtd->block_markbad = nand_block_markbad; + mtd->_erase = nand_erase; + mtd->_point = NULL; + mtd->_unpoint = NULL; + mtd->_read = nand_read; + mtd->_write = nand_write; + mtd->_panic_write = panic_nand_write; + mtd->_read_oob = nand_read_oob; + mtd->_write_oob = nand_write_oob; + mtd->_sync = nand_sync; + mtd->_lock = NULL; + mtd->_unlock = NULL; + mtd->_suspend = nand_suspend; + mtd->_resume = nand_resume; + mtd->_block_isbad = nand_block_isbad; + mtd->_block_markbad = nand_block_markbad; mtd->writebufsize = mtd->writesize; - /* propagate ecc.layout to mtd_info */ + /* propagate ecc info to mtd_info */ mtd->ecclayout = chip->ecc.layout; + mtd->ecc_strength = chip->ecc.strength * chip->ecc.steps; /* Check, if we should skip the bad block table scan */ if (chip->options & NAND_SKIP_BBTSCAN) diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index ec68854..2b6f632 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -179,6 +179,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc, chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; chip->priv = ndfc; ndfc->mtd.priv = chip; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index b3a883e..c2b0bba 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1058,6 +1058,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) { info->nand.ecc.bytes = 3; info->nand.ecc.size = 512; + info->nand.ecc.strength = 1; info->nand.ecc.calculate = omap_calculate_ecc; info->nand.ecc.hwctl = omap_enable_hwecc; info->nand.ecc.correct = omap_correct_data; @@ -1101,8 +1102,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } - mtd_device_parse_register(&info->mtd, NULL, 0, - pdata->parts, pdata->nr_parts); + mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts, + pdata->nr_parts); platform_set_drvdata(pdev, &info->mtd); diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 29f505a..1d3bfb2 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -129,8 +129,8 @@ static int __init orion_nand_probe(struct platform_device *pdev) } mtd->name = "orion_nand"; - ret = mtd_device_parse_register(mtd, NULL, 0, - board->parts, board->nr_parts); + ret = mtd_device_parse_register(mtd, NULL, NULL, board->parts, + board->nr_parts); if (ret) { nand_release(mtd); goto no_dev; diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 7f2da69..6404e6e 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -99,8 +99,9 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) } err = mtd_device_parse_register(&data->mtd, - pdata->chip.part_probe_types, 0, - pdata->chip.partitions, pdata->chip.nr_partitions); + pdata->chip.part_probe_types, NULL, + pdata->chip.partitions, + pdata->chip.nr_partitions); if (!err) return err; diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c index 7e52af5..0ddd90e 100644 --- a/drivers/mtd/nand/ppchameleonevb.c +++ b/drivers/mtd/nand/ppchameleonevb.c @@ -275,11 +275,10 @@ static int __init ppchameleonevb_init(void) ppchameleon_mtd->name = "ppchameleon-nand"; /* Register the partitions */ - mtd_device_parse_register(ppchameleon_mtd, NULL, 0, - ppchameleon_mtd->size == NAND_SMALL_SIZE ? - partition_info_me : - partition_info_hi, - NUM_PARTITIONS); + mtd_device_parse_register(ppchameleon_mtd, NULL, NULL, + ppchameleon_mtd->size == NAND_SMALL_SIZE ? + partition_info_me : partition_info_hi, + NUM_PARTITIONS); nand_evb_init: /**************************** @@ -365,11 +364,10 @@ static int __init ppchameleonevb_init(void) ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME; /* Register the partitions */ - mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0, - ppchameleon_mtd->size == NAND_SMALL_SIZE ? - partition_info_me : - partition_info_hi, - NUM_PARTITIONS); + mtd_device_parse_register(ppchameleonevb_mtd, NULL, NULL, + ppchameleon_mtd->size == NAND_SMALL_SIZE ? + partition_info_me : partition_info_hi, + NUM_PARTITIONS); /* Return happy */ return 0; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 5c3d719..def50ca 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1002,6 +1002,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) KEEP_CONFIG: chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = host->page_size; + chip->ecc.strength = 1; chip->options = NAND_NO_AUTOINCR; chip->options |= NAND_NO_READRDY; @@ -1228,8 +1229,9 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) continue; } - ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0, - pdata->parts[cs], pdata->nr_parts[cs]); + ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, + NULL, pdata->parts[cs], + pdata->nr_parts[cs]); if (!ret) probe_success = 1; } diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 769a4e0..c204018 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -891,6 +891,7 @@ int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) chip->ecc.mode = NAND_ECC_HW_SYNDROME; chip->ecc.size = R852_DMA_LEN; chip->ecc.bytes = SM_OOB_SIZE; + chip->ecc.strength = 2; chip->ecc.hwctl = r852_ecc_hwctl; chip->ecc.calculate = r852_ecc_calculate; chip->ecc.correct = r852_ecc_correct; diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c index f309add..e55b5cf 100644 --- a/drivers/mtd/nand/rtc_from4.c +++ b/drivers/mtd/nand/rtc_from4.c @@ -527,6 +527,7 @@ static int __init rtc_from4_init(void) this->ecc.mode = NAND_ECC_HW_SYNDROME; this->ecc.size = 512; this->ecc.bytes = 8; + this->ecc.strength = 3; /* return the status of extra status and ECC checks */ this->errstat = rtc_from4_errstat; /* set the nand_oobinfo to support FPGA H/W error detection */ diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 868685d..91121f3 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -751,8 +751,8 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, if (set) mtd->mtd.name = set->name; - return mtd_device_parse_register(&mtd->mtd, NULL, 0, - set->partitions, set->nr_partitions); + return mtd_device_parse_register(&mtd->mtd, NULL, NULL, + set->partitions, set->nr_partitions); } /** @@ -823,6 +823,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, chip->ecc.calculate = s3c2410_nand_calculate_ecc; chip->ecc.correct = s3c2410_nand_correct_data; chip->ecc.mode = NAND_ECC_HW; + chip->ecc.strength = 1; switch (info->cpu_type) { case TYPE_S3C2410: diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 93b1f74..e9b2b26 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -26,6 +26,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/mtd/mtd.h> @@ -283,7 +284,7 @@ static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset) static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val) { struct sh_flctl *flctl = mtd_to_flctl(mtd); - uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT; + uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT; uint32_t flcmdcr_val, addr_len_bytes = 0; /* Set SNAND bit if page size is 2048byte */ @@ -303,6 +304,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va break; case NAND_CMD_READ0: case NAND_CMD_READOOB: + case NAND_CMD_RNDOUT: addr_len_bytes = flctl->rw_ADRCNT; flcmdcr_val |= CDSRC_E; if (flctl->chip.options & NAND_BUSWIDTH_16) @@ -320,6 +322,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va break; case NAND_CMD_READID: flcmncr_val &= ~SNAND_E; + flcmdcr_val |= CDSRC_E; addr_len_bytes = ADRCNT_1; break; case NAND_CMD_STATUS: @@ -513,6 +516,8 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, struct sh_flctl *flctl = mtd_to_flctl(mtd); uint32_t read_cmd = 0; + pm_runtime_get_sync(&flctl->pdev->dev); + flctl->read_bytes = 0; if (command != NAND_CMD_PAGEPROG) flctl->index = 0; @@ -525,7 +530,6 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, execmd_read_page_sector(mtd, page_addr); break; } - empty_fifo(flctl); if (flctl->page_size) set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8) | command); @@ -547,7 +551,6 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, break; } - empty_fifo(flctl); if (flctl->page_size) { set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8) | NAND_CMD_READ0); @@ -559,15 +562,35 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, flctl->read_bytes = mtd->oobsize; goto read_normal_exit; + case NAND_CMD_RNDOUT: + if (flctl->hwecc) + break; + + if (flctl->page_size) + set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8) + | command); + else + set_cmd_regs(mtd, command, command); + + set_addr(mtd, column, 0); + + flctl->read_bytes = mtd->writesize + mtd->oobsize - column; + goto read_normal_exit; + case NAND_CMD_READID: - empty_fifo(flctl); set_cmd_regs(mtd, command, command); - set_addr(mtd, 0, 0); - flctl->read_bytes = 4; + /* READID is always performed using an 8-bit bus */ + if (flctl->chip.options & NAND_BUSWIDTH_16) + column <<= 1; + set_addr(mtd, column, 0); + + flctl->read_bytes = 8; writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */ + empty_fifo(flctl); start_translation(flctl); - read_datareg(flctl, 0); /* read and end */ + read_fiforeg(flctl, flctl->read_bytes, 0); + wait_completion(flctl); break; case NAND_CMD_ERASE1: @@ -650,29 +673,55 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, default: break; } - return; + goto runtime_exit; read_normal_exit: writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */ + empty_fifo(flctl); start_translation(flctl); read_fiforeg(flctl, flctl->read_bytes, 0); wait_completion(flctl); +runtime_exit: + pm_runtime_put_sync(&flctl->pdev->dev); return; } static void flctl_select_chip(struct mtd_info *mtd, int chipnr) { struct sh_flctl *flctl = mtd_to_flctl(mtd); - uint32_t flcmncr_val = readl(FLCMNCR(flctl)); + int ret; switch (chipnr) { case -1: - flcmncr_val &= ~CE0_ENABLE; - writel(flcmncr_val, FLCMNCR(flctl)); + flctl->flcmncr_base &= ~CE0_ENABLE; + + pm_runtime_get_sync(&flctl->pdev->dev); + writel(flctl->flcmncr_base, FLCMNCR(flctl)); + + if (flctl->qos_request) { + dev_pm_qos_remove_request(&flctl->pm_qos); + flctl->qos_request = 0; + } + + pm_runtime_put_sync(&flctl->pdev->dev); break; case 0: - flcmncr_val |= CE0_ENABLE; - writel(flcmncr_val, FLCMNCR(flctl)); + flctl->flcmncr_base |= CE0_ENABLE; + + if (!flctl->qos_request) { + ret = dev_pm_qos_add_request(&flctl->pdev->dev, + &flctl->pm_qos, 100); + if (ret < 0) + dev_err(&flctl->pdev->dev, + "PM QoS request failed: %d\n", ret); + flctl->qos_request = 1; + } + + if (flctl->holden) { + pm_runtime_get_sync(&flctl->pdev->dev); + writel(HOLDEN, FLHOLDCR(flctl)); + pm_runtime_put_sync(&flctl->pdev->dev); + } break; default: BUG(); @@ -730,11 +779,6 @@ static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) return 0; } -static void flctl_register_init(struct sh_flctl *flctl, unsigned long val) -{ - writel(val, FLCMNCR(flctl)); -} - static int flctl_chip_init_tail(struct mtd_info *mtd) { struct sh_flctl *flctl = mtd_to_flctl(mtd); @@ -781,13 +825,13 @@ static int flctl_chip_init_tail(struct mtd_info *mtd) chip->ecc.size = 512; chip->ecc.bytes = 10; + chip->ecc.strength = 4; chip->ecc.read_page = flctl_read_page_hwecc; chip->ecc.write_page = flctl_write_page_hwecc; chip->ecc.mode = NAND_ECC_HW; /* 4 symbols ECC enabled */ - writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02, - FLCMNCR(flctl)); + flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02; } else { chip->ecc.mode = NAND_ECC_SOFT; } @@ -819,13 +863,13 @@ static int __devinit flctl_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "failed to get I/O memory\n"); - goto err; + goto err_iomap; } flctl->reg = ioremap(res->start, resource_size(res)); if (flctl->reg == NULL) { dev_err(&pdev->dev, "failed to remap I/O memory\n"); - goto err; + goto err_iomap; } platform_set_drvdata(pdev, flctl); @@ -833,9 +877,9 @@ static int __devinit flctl_probe(struct platform_device *pdev) nand = &flctl->chip; flctl_mtd->priv = nand; flctl->pdev = pdev; + flctl->flcmncr_base = pdata->flcmncr_val; flctl->hwecc = pdata->has_hwecc; - - flctl_register_init(flctl, pdata->flcmncr_val); + flctl->holden = pdata->use_holden; nand->options = NAND_NO_AUTOINCR; @@ -855,23 +899,28 @@ static int __devinit flctl_probe(struct platform_device *pdev) nand->read_word = flctl_read_word; } + pm_runtime_enable(&pdev->dev); + pm_runtime_resume(&pdev->dev); + ret = nand_scan_ident(flctl_mtd, 1, NULL); if (ret) - goto err; + goto err_chip; ret = flctl_chip_init_tail(flctl_mtd); if (ret) - goto err; + goto err_chip; ret = nand_scan_tail(flctl_mtd); if (ret) - goto err; + goto err_chip; mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts); return 0; -err: +err_chip: + pm_runtime_disable(&pdev->dev); +err_iomap: kfree(flctl); return ret; } @@ -881,6 +930,7 @@ static int __devexit flctl_remove(struct platform_device *pdev) struct sh_flctl *flctl = platform_get_drvdata(pdev); nand_release(&flctl->mtd); + pm_runtime_disable(&pdev->dev); kfree(flctl); return 0; diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index b175c0f..3421e37 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -167,6 +167,7 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) this->ecc.mode = NAND_ECC_HW; this->ecc.size = 256; this->ecc.bytes = 3; + this->ecc.strength = 1; this->badblock_pattern = data->badblock_pattern; this->ecc.layout = data->ecc_layout; this->ecc.hwctl = sharpsl_nand_enable_hwecc; @@ -181,8 +182,8 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) /* Register the partitions */ sharpsl->mtd.name = "sharpsl-nand"; - err = mtd_device_parse_register(&sharpsl->mtd, NULL, 0, - data->partitions, data->nr_partitions); + err = mtd_device_parse_register(&sharpsl->mtd, NULL, NULL, + data->partitions, data->nr_partitions); if (err) goto err_add; diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 6caa0cd..5aa5180 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -430,6 +430,7 @@ static int tmio_probe(struct platform_device *dev) nand_chip->ecc.mode = NAND_ECC_HW; nand_chip->ecc.size = 512; nand_chip->ecc.bytes = 6; + nand_chip->ecc.strength = 2; nand_chip->ecc.hwctl = tmio_nand_enable_hwecc; nand_chip->ecc.calculate = tmio_nand_calculate_ecc; nand_chip->ecc.correct = tmio_nand_correct_data; @@ -456,9 +457,9 @@ static int tmio_probe(struct platform_device *dev) goto err_scan; } /* Register the partitions */ - retval = mtd_device_parse_register(mtd, NULL, 0, - data ? data->partition : NULL, - data ? data->num_partitions : 0); + retval = mtd_device_parse_register(mtd, NULL, NULL, + data ? data->partition : NULL, + data ? data->num_partitions : 0); if (!retval) return retval; diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index c7c4f1d..26398dc 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -356,6 +356,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */ chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->ecc.strength = 1; chip->chip_delay = 100; chip->controller = &drvdata->hw_control; @@ -386,7 +387,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) } mtd->name = txx9_priv->mtdname; - mtd_device_parse_register(mtd, NULL, 0, NULL, 0); + mtd_device_parse_register(mtd, NULL, NULL, NULL, 0); drvdata->mtds[i] = mtd; } diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index a75382a..c5f4ebf 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -56,13 +56,6 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) if (memcmp(mtd->name, "DiskOnChip", 10)) return; - if (!mtd_can_have_bb(mtd)) { - printk(KERN_ERR -"NFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n" -"Please use the new diskonchip driver under the NAND subsystem.\n"); - return; - } - pr_debug("NFTL: add_mtd for %s\n", mtd->name); nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL); diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 772ad29..91467bb 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -1,6 +1,7 @@ menuconfig MTD_ONENAND tristate "OneNAND Device Support" depends on MTD + depends on HAS_IOMEM help This enables support for accessing all type of OneNAND flash devices. For further information see diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 0ccd5bf..1c4f97c 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -70,9 +70,9 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev) goto out_iounmap; } - err = mtd_device_parse_register(&info->mtd, NULL, 0, - pdata ? pdata->parts : NULL, - pdata ? pdata->nr_parts : 0); + err = mtd_device_parse_register(&info->mtd, NULL, NULL, + pdata ? pdata->parts : NULL, + pdata ? pdata->nr_parts : 0); platform_set_drvdata(pdev, info); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 7e9ea68..398a827 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -751,9 +751,9 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) if ((r = onenand_scan(&c->mtd, 1)) < 0) goto err_release_regulator; - r = mtd_device_parse_register(&c->mtd, NULL, 0, - pdata ? pdata->parts : NULL, - pdata ? pdata->nr_parts : 0); + r = mtd_device_parse_register(&c->mtd, NULL, NULL, + pdata ? pdata->parts : NULL, + pdata ? pdata->nr_parts : 0); if (r) goto err_release_onenand; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index a061bc1..b3ce12e 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1753,16 +1753,6 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len, pr_debug("%s: to = 0x%08x, len = %i\n", __func__, (unsigned int)to, (int)len); - /* Initialize retlen, in case of early exit */ - *retlen = 0; - - /* Do not allow writes past end of device */ - if (unlikely((to + len) > mtd->size)) { - printk(KERN_ERR "%s: Attempt write to past end of device\n", - __func__); - return -EINVAL; - } - /* Reject writes, which are not page aligned */ if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) { printk(KERN_ERR "%s: Attempt to write not page aligned data\n", @@ -1890,13 +1880,6 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, ops->retlen = 0; ops->oobretlen = 0; - /* Do not allow writes past end of device */ - if (unlikely((to + len) > mtd->size)) { - printk(KERN_ERR "%s: Attempt write to past end of device\n", - __func__); - return -EINVAL; - } - /* Reject writes, which are not page aligned */ if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) { printk(KERN_ERR "%s: Attempt to write not page aligned data\n", @@ -2493,12 +2476,6 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) (unsigned long long)instr->addr, (unsigned long long)instr->len); - /* Do not allow erase past end of device */ - if (unlikely((len + addr) > mtd->size)) { - printk(KERN_ERR "%s: Erase past end of device\n", __func__); - return -EINVAL; - } - if (FLEXONENAND(this)) { /* Find the eraseregion of this address */ int i = flexonenand_region(mtd, addr); @@ -2525,8 +2502,6 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) return -EINVAL; } - instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; - /* Grab the lock and see if the device is available */ onenand_get_device(mtd, FL_ERASING); @@ -4103,33 +4078,34 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) mtd->oobavail = this->ecclayout->oobavail; mtd->ecclayout = this->ecclayout; + mtd->ecc_strength = 1; /* Fill in remaining MTD driver data */ mtd->type = ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH : MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->erase = onenand_erase; - mtd->point = NULL; - mtd->unpoint = NULL; - mtd->read = onenand_read; - mtd->write = onenand_write; - mtd->read_oob = onenand_read_oob; - mtd->write_oob = onenand_write_oob; - mtd->panic_write = onenand_panic_write; + mtd->_erase = onenand_erase; + mtd->_point = NULL; + mtd->_unpoint = NULL; + mtd->_read = onenand_read; + mtd->_write = onenand_write; + mtd->_read_oob = onenand_read_oob; + mtd->_write_oob = onenand_write_oob; + mtd->_panic_write = onenand_panic_write; #ifdef CONFIG_MTD_ONENAND_OTP - mtd->get_fact_prot_info = onenand_get_fact_prot_info; - mtd->read_fact_prot_reg = onenand_read_fact_prot_reg; - mtd->get_user_prot_info = onenand_get_user_prot_info; - mtd->read_user_prot_reg = onenand_read_user_prot_reg; - mtd->write_user_prot_reg = onenand_write_user_prot_reg; - mtd->lock_user_prot_reg = onenand_lock_user_prot_reg; + mtd->_get_fact_prot_info = onenand_get_fact_prot_info; + mtd->_read_fact_prot_reg = onenand_read_fact_prot_reg; + mtd->_get_user_prot_info = onenand_get_user_prot_info; + mtd->_read_user_prot_reg = onenand_read_user_prot_reg; + mtd->_write_user_prot_reg = onenand_write_user_prot_reg; + mtd->_lock_user_prot_reg = onenand_lock_user_prot_reg; #endif - mtd->sync = onenand_sync; - mtd->lock = onenand_lock; - mtd->unlock = onenand_unlock; - mtd->suspend = onenand_suspend; - mtd->resume = onenand_resume; - mtd->block_isbad = onenand_block_isbad; - mtd->block_markbad = onenand_block_markbad; + mtd->_sync = onenand_sync; + mtd->_lock = onenand_lock; + mtd->_unlock = onenand_unlock; + mtd->_suspend = onenand_suspend; + mtd->_resume = onenand_resume; + mtd->_block_isbad = onenand_block_isbad; + mtd->_block_markbad = onenand_block_markbad; mtd->owner = THIS_MODULE; mtd->writebufsize = mtd->writesize; diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index fa1ee43..8e4b3f2 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -923,7 +923,7 @@ static int s3c_onenand_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!r) { dev_err(&pdev->dev, "no buffer memory resource defined\n"); - return -ENOENT; + err = -ENOENT; goto ahb_resource_failed; } @@ -964,7 +964,7 @@ static int s3c_onenand_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!r) { dev_err(&pdev->dev, "no dma memory resource defined\n"); - return -ENOENT; + err = -ENOENT; goto dma_resource_failed; } @@ -1014,7 +1014,7 @@ static int s3c_onenand_probe(struct platform_device *pdev) if (s3c_read_reg(MEM_CFG_OFFSET) & ONENAND_SYS_CFG1_SYNC_READ) dev_info(&onenand->pdev->dev, "OneNAND Sync. Burst Read enabled\n"); - err = mtd_device_parse_register(mtd, NULL, 0, + err = mtd_device_parse_register(mtd, NULL, NULL, pdata ? pdata->parts : NULL, pdata ? pdata->nr_parts : 0); diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 48970c1..580035c 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -78,8 +78,7 @@ static int parse_redboot_partitions(struct mtd_info *master, if ( directory < 0 ) { offset = master->size + directory * master->erasesize; - while (mtd_can_have_bb(master) && - mtd_block_isbad(master, offset)) { + while (mtd_block_isbad(master, offset)) { if (!offset) { nogood: printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); @@ -89,8 +88,7 @@ static int parse_redboot_partitions(struct mtd_info *master, } } else { offset = directory * master->erasesize; - while (mtd_can_have_bb(master) && - mtd_block_isbad(master, offset)) { + while (mtd_block_isbad(master, offset)) { offset += master->erasesize; if (offset == master->size) goto nogood; diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c index 072ed59..9e2dfd5 100644 --- a/drivers/mtd/sm_ftl.c +++ b/drivers/mtd/sm_ftl.c @@ -1256,7 +1256,7 @@ static void sm_remove_dev(struct mtd_blktrans_dev *dev) static struct mtd_blktrans_ops sm_ftl_ops = { .name = "smblk", - .major = -1, + .major = 0, .part_bits = SM_FTL_PARTN_BITS, .blksize = SM_SECTOR_SIZE, .getgeo = sm_getgeo, diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 941bc3c..90b9882 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -174,11 +174,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, int err = 0, lnum, offs, total_read; struct gluebi_device *gluebi; - if (len < 0 || from < 0 || from + len > mtd->size) - return -EINVAL; - gluebi = container_of(mtd, struct gluebi_device, mtd); - lnum = div_u64_rem(from, mtd->erasesize, &offs); total_read = len; while (total_read) { @@ -218,14 +214,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, int err = 0, lnum, offs, total_written; struct gluebi_device *gluebi; - if (len < 0 || to < 0 || len + to > mtd->size) - return -EINVAL; - gluebi = container_of(mtd, struct gluebi_device, mtd); - - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) @@ -265,21 +254,13 @@ static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr) int err, i, lnum, count; struct gluebi_device *gluebi; - if (instr->addr < 0 || instr->addr > mtd->size - mtd->erasesize) - return -EINVAL; - if (instr->len < 0 || instr->addr + instr->len > mtd->size) - return -EINVAL; if (mtd_mod_by_ws(instr->addr, mtd) || mtd_mod_by_ws(instr->len, mtd)) return -EINVAL; lnum = mtd_div_by_eb(instr->addr, mtd); count = mtd_div_by_eb(instr->len, mtd); - gluebi = container_of(mtd, struct gluebi_device, mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - for (i = 0; i < count - 1; i++) { err = ubi_leb_unmap(gluebi->desc, lnum + i); if (err) @@ -340,11 +321,11 @@ static int gluebi_create(struct ubi_device_info *di, mtd->owner = THIS_MODULE; mtd->writesize = di->min_io_size; mtd->erasesize = vi->usable_leb_size; - mtd->read = gluebi_read; - mtd->write = gluebi_write; - mtd->erase = gluebi_erase; - mtd->get_device = gluebi_get_device; - mtd->put_device = gluebi_put_device; + mtd->_read = gluebi_read; + mtd->_write = gluebi_write; + mtd->_erase = gluebi_erase; + mtd->_get_device = gluebi_get_device; + mtd->_put_device = gluebi_put_device; /* * In case of dynamic a volume, MTD device size is just volume size. In diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 9abd4eb..dd5e048 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -70,7 +70,6 @@ static const char *version = #include <linux/bitops.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 6057b30..0910dce 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -229,7 +229,6 @@ static int dma; #include <linux/bitops.h> #include <linux/gfp.h> -#include <asm/system.h> #include <asm/dma.h> #include <asm/io.h> diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c index 980e65c..5bed4c4 100644 --- a/drivers/net/arcnet/com20020_cs.c +++ b/drivers/net/arcnet/com20020_cs.c @@ -47,7 +47,6 @@ #include <pcmcia/ds.h> #include <asm/io.h> -#include <asm/system.h> #define VERSION "arcnet: COM20020 PCMCIA support loaded.\n" diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a20b585..941b4e1 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -54,7 +54,6 @@ #include <linux/inet.h> #include <linux/bitops.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/dma.h> #include <linux/uaccess.h> #include <linux/errno.h> diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 98a5a7d..034c16b 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -40,7 +40,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> -#include <asm/system.h> #include <linux/uaccess.h> #include <linux/bitops.h> #include <linux/string.h> diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 7cb2785..ec03b40 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -35,7 +35,6 @@ #include <asm/io.h> /* CRIS_LED_* I/O functions */ #include <asm/irq.h> #include <asm/dma.h> -#include <asm/system.h> #include <asm/ethernet.h> #include <asm/cache.h> #include <arch/io_interface_mux.h> diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c index e61b2f8..66df936 100644 --- a/drivers/net/ethernet/3com/3c574_cs.c +++ b/drivers/net/ethernet/3com/3c574_cs.c @@ -95,7 +95,6 @@ earlier 3Com products. #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/system.h> /*====================================================================*/ diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c index b23253b..a556c01 100644 --- a/drivers/net/ethernet/3com/3c589_cs.c +++ b/drivers/net/ethernet/3com/3c589_cs.c @@ -50,7 +50,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/system.h> /* To minimize the size of the driver source I only define operating constants if they are used several times. You'll need the manual diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c index fbab136..49d76bd 100644 --- a/drivers/net/ethernet/8390/3c503.c +++ b/drivers/net/ethernet/8390/3c503.c @@ -54,7 +54,6 @@ static const char version[] = #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/byteorder.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/ac3200.c b/drivers/net/ethernet/8390/ac3200.c index 5337dd0..ccf0794 100644 --- a/drivers/net/ethernet/8390/ac3200.c +++ b/drivers/net/ethernet/8390/ac3200.c @@ -34,7 +34,6 @@ static const char version[] = #include <linux/init.h> #include <linux/interrupt.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c index 3ad5d2f..9239592 100644 --- a/drivers/net/ethernet/8390/apne.c +++ b/drivers/net/ethernet/8390/apne.c @@ -39,7 +39,6 @@ #include <linux/interrupt.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/setup.h> #include <asm/amigaints.h> diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index c30adcc9..11476ca 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -31,7 +31,6 @@ #include <net/ax88796.h> -#include <asm/system.h> /* Rename the lib8390.c functions to show that they are in this driver */ #define __ei_open ax_ei_open diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c index c5bd8eb..e1b3941 100644 --- a/drivers/net/ethernet/8390/axnet_cs.c +++ b/drivers/net/ethernet/8390/axnet_cs.c @@ -46,7 +46,6 @@ #include <pcmcia/cisreg.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <asm/uaccess.h> diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c index d16dc53..ed55ce8 100644 --- a/drivers/net/ethernet/8390/e2100.c +++ b/drivers/net/ethernet/8390/e2100.c @@ -48,7 +48,6 @@ static const char version[] = #include <linux/delay.h> #include <asm/io.h> -#include <asm/system.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/es3210.c b/drivers/net/ethernet/8390/es3210.c index 6428f9e..ba1b5c9 100644 --- a/drivers/net/ethernet/8390/es3210.c +++ b/drivers/net/ethernet/8390/es3210.c @@ -59,7 +59,6 @@ static const char version[] = #include <linux/etherdevice.h> #include <asm/io.h> -#include <asm/system.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/etherh.c b/drivers/net/ethernet/8390/etherh.c index 48c4948..dbefd56 100644 --- a/drivers/net/ethernet/8390/etherh.c +++ b/drivers/net/ethernet/8390/etherh.c @@ -45,9 +45,9 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/ecard.h> #include <asm/io.h> +#include <asm/system_info.h> #define EI_SHIFT(x) (ei_local->reg_offset[x]) diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c index d42938b..52f70f9 100644 --- a/drivers/net/ethernet/8390/hp-plus.c +++ b/drivers/net/ethernet/8390/hp-plus.c @@ -33,7 +33,6 @@ static const char version[] = #include <linux/interrupt.h> #include <linux/delay.h> -#include <asm/system.h> #include <asm/io.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c index 113f1e0..37fa89a 100644 --- a/drivers/net/ethernet/8390/hp.c +++ b/drivers/net/ethernet/8390/hp.c @@ -33,7 +33,6 @@ static const char version[] = #include <linux/interrupt.h> #include <linux/delay.h> -#include <asm/system.h> #include <asm/io.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c index e77f624..b329f5c 100644 --- a/drivers/net/ethernet/8390/lib8390.c +++ b/drivers/net/ethernet/8390/lib8390.c @@ -57,7 +57,6 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/bitops.h> -#include <asm/system.h> #include <linux/uaccess.h> #include <linux/io.h> #include <asm/irq.h> diff --git a/drivers/net/ethernet/8390/lne390.c b/drivers/net/ethernet/8390/lne390.c index 69490ae..479409b 100644 --- a/drivers/net/ethernet/8390/lne390.c +++ b/drivers/net/ethernet/8390/lne390.c @@ -46,7 +46,6 @@ static const char *version = #include <linux/etherdevice.h> #include <asm/io.h> -#include <asm/system.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c index af5d982..88ccc8b 100644 --- a/drivers/net/ethernet/8390/mac8390.c +++ b/drivers/net/ethernet/8390/mac8390.c @@ -37,7 +37,6 @@ #include <linux/bitops.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/dma.h> #include <asm/hwtest.h> #include <asm/macints.h> diff --git a/drivers/net/ethernet/8390/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c index 9b9c77d..7fc28f2 100644 --- a/drivers/net/ethernet/8390/ne-h8300.c +++ b/drivers/net/ethernet/8390/ne-h8300.c @@ -29,7 +29,6 @@ static const char version1[] = #include <linux/etherdevice.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index f92ea2a..d04911d 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -53,7 +53,6 @@ static const char version2[] = #include <linux/jiffies.h> #include <linux/platform_device.h> -#include <asm/system.h> #include <asm/io.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/ne2.c b/drivers/net/ethernet/8390/ne2.c index 922b320..ef85839 100644 --- a/drivers/net/ethernet/8390/ne2.c +++ b/drivers/net/ethernet/8390/ne2.c @@ -76,7 +76,6 @@ static const char *version = "ne2.c:v0.91 Nov 16 1998 Wim Dumon <wimpie@kotnet.o #include <linux/bitops.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index 3fab04a..5e8845f 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -54,7 +54,6 @@ static int options[MAX_UNITS]; #include <linux/netdevice.h> #include <linux/etherdevice.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> diff --git a/drivers/net/ethernet/8390/ne3210.c b/drivers/net/ethernet/8390/ne3210.c index 2a3e805..a2f8b2b 100644 --- a/drivers/net/ethernet/8390/ne3210.c +++ b/drivers/net/ethernet/8390/ne3210.c @@ -39,7 +39,6 @@ #include <linux/mm.h> #include <asm/io.h> -#include <asm/system.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c index f2a4e5d..de1af0b 100644 --- a/drivers/net/ethernet/8390/pcnet_cs.c +++ b/drivers/net/ethernet/8390/pcnet_cs.c @@ -49,7 +49,6 @@ #include <pcmcia/cisreg.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <asm/uaccess.h> diff --git a/drivers/net/ethernet/8390/smc-mca.c b/drivers/net/ethernet/8390/smc-mca.c index 77efec4..7a68590 100644 --- a/drivers/net/ethernet/8390/smc-mca.c +++ b/drivers/net/ethernet/8390/smc-mca.c @@ -47,7 +47,6 @@ #include <linux/etherdevice.h> #include <asm/io.h> -#include <asm/system.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c index 1cc306a..b0fbce3 100644 --- a/drivers/net/ethernet/8390/smc-ultra.c +++ b/drivers/net/ethernet/8390/smc-ultra.c @@ -69,7 +69,6 @@ static const char version[] = #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/smc-ultra32.c b/drivers/net/ethernet/8390/smc-ultra32.c index bb87053..923e42a 100644 --- a/drivers/net/ethernet/8390/smc-ultra32.c +++ b/drivers/net/ethernet/8390/smc-ultra32.c @@ -57,7 +57,6 @@ static const char *version = "smc-ultra32.c: 06/97 v1.00\n"; #include <linux/etherdevice.h> #include <asm/io.h> -#include <asm/system.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c index 3b90375..8df4c41 100644 --- a/drivers/net/ethernet/8390/stnic.c +++ b/drivers/net/ethernet/8390/stnic.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/delay.h> -#include <asm/system.h> #include <asm/io.h> #include <mach-se/mach/se.h> #include <asm/machvec.h> diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c index c175fad..03eb3ee 100644 --- a/drivers/net/ethernet/8390/wd.c +++ b/drivers/net/ethernet/8390/wd.c @@ -39,7 +39,6 @@ static const char version[] = #include <linux/etherdevice.h> #include <asm/io.h> -#include <asm/system.h> #include "8390.h" diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c index bcd2732..7818e63 100644 --- a/drivers/net/ethernet/8390/zorro8390.c +++ b/drivers/net/ethernet/8390/zorro8390.c @@ -31,7 +31,6 @@ #include <linux/zorro.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/amigaints.h> #include <asm/amigahw.h> diff --git a/drivers/net/ethernet/alteon/acenic.c b/drivers/net/ethernet/alteon/acenic.c index 6c3b1c0..7219123 100644 --- a/drivers/net/ethernet/alteon/acenic.c +++ b/drivers/net/ethernet/alteon/acenic.c @@ -78,7 +78,6 @@ #include <net/sock.h> #include <net/ip.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/byteorder.h> diff --git a/drivers/net/ethernet/amd/7990.c b/drivers/net/ethernet/amd/7990.c index 1b046f5..6e722dc 100644 --- a/drivers/net/ethernet/amd/7990.c +++ b/drivers/net/ethernet/amd/7990.c @@ -33,7 +33,6 @@ #include <linux/socket.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/pgtable.h> diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c index cc7b9e4..e10ffad 100644 --- a/drivers/net/ethernet/amd/am79c961a.c +++ b/drivers/net/ethernet/amd/am79c961a.c @@ -30,7 +30,6 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/system.h> #define TX_BUFFERS 15 #define RX_BUFFERS 25 diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c index 9f62504..64d0d9c 100644 --- a/drivers/net/ethernet/amd/amd8111e.c +++ b/drivers/net/ethernet/amd/amd8111e.c @@ -88,7 +88,6 @@ Revision History: #include <linux/crc32.h> #include <linux/dma-mapping.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/byteorder.h> #include <asm/uaccess.h> diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c index 7dc508e..75299f5 100644 --- a/drivers/net/ethernet/amd/declance.c +++ b/drivers/net/ethernet/amd/declance.c @@ -64,7 +64,6 @@ #include <linux/types.h> #include <asm/addrspace.h> -#include <asm/system.h> #include <asm/dec/interrupts.h> #include <asm/dec/ioasic.h> diff --git a/drivers/net/ethernet/amd/hplance.c b/drivers/net/ethernet/amd/hplance.c index 4e2d68a..8baff4e 100644 --- a/drivers/net/ethernet/amd/hplance.c +++ b/drivers/net/ethernet/amd/hplance.c @@ -22,7 +22,6 @@ #include <linux/etherdevice.h> #include <linux/skbuff.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/pgtable.h> diff --git a/drivers/net/ethernet/amd/mvme147.c b/drivers/net/ethernet/amd/mvme147.c index 56bc47a9..9af3c30 100644 --- a/drivers/net/ethernet/amd/mvme147.c +++ b/drivers/net/ethernet/amd/mvme147.c @@ -22,7 +22,6 @@ #include <linux/etherdevice.h> #include <linux/skbuff.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/mvme147hw.h> diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c index ebdb9e2..9f59bf6 100644 --- a/drivers/net/ethernet/amd/nmclan_cs.c +++ b/drivers/net/ethernet/amd/nmclan_cs.c @@ -154,7 +154,6 @@ Include Files #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/system.h> /* ---------------------------------------------------------------------------- Defines diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c index e3fe350..d7a3533 100644 --- a/drivers/net/ethernet/amd/sunlance.c +++ b/drivers/net/ethernet/amd/sunlance.c @@ -95,7 +95,6 @@ static char lancestr[] = "LANCE"; #include <linux/of_device.h> #include <linux/gfp.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/pgtable.h> diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d2ff8ee..062ac33 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -48,7 +48,6 @@ #include <net/checksum.h> #include <net/ip.h> -#include <asm/system.h> #include <linux/io.h> #include <asm/byteorder.h> #include <linux/uaccess.h> diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 30fee42..b9406cb 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -148,7 +148,6 @@ #include <linux/delay.h> #include <linux/gfp.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <linux/atomic.h> diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c index 932fdcc..e285f38 100644 --- a/drivers/net/ethernet/cirrus/mac89x0.c +++ b/drivers/net/ethernet/cirrus/mac89x0.c @@ -99,7 +99,6 @@ static char *version = #include <linux/bitops.h> #include <linux/gfp.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/hwtest.h> #include <asm/macints.h> diff --git a/drivers/net/ethernet/dlink/de600.c b/drivers/net/ethernet/dlink/de600.c index 682750c..414f0ee 100644 --- a/drivers/net/ethernet/dlink/de600.c +++ b/drivers/net/ethernet/dlink/de600.c @@ -46,7 +46,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/in.h> -#include <asm/system.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/delay.h> diff --git a/drivers/net/ethernet/dlink/de620.c b/drivers/net/ethernet/dlink/de620.c index afc5aaa..2e2bc60 100644 --- a/drivers/net/ethernet/dlink/de620.c +++ b/drivers/net/ethernet/dlink/de620.c @@ -122,7 +122,6 @@ static const char version[] = #include <linux/skbuff.h> #include <asm/io.h> -#include <asm/system.h> /* Constant definitions for the DE-620 registers, commands and bits */ #include "de620.h" diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 4e3cd2f..17a46e7 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -3945,6 +3945,8 @@ static int ucc_geth_probe(struct platform_device* ofdev) } if (max_speed == SPEED_1000) { + unsigned int snums = qe_get_num_of_snums(); + /* configure muram FIFOs for gigabit operation */ ug_info->uf_info.urfs = UCC_GETH_URFS_GIGA_INIT; ug_info->uf_info.urfet = UCC_GETH_URFET_GIGA_INIT; @@ -3954,11 +3956,11 @@ static int ucc_geth_probe(struct platform_device* ofdev) ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT; ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4; - /* If QE's snum number is 46 which means we need to support + /* If QE's snum number is 46/76 which means we need to support * 4 UECs at 1000Base-T simultaneously, we need to allocate * more Threads to Rx. */ - if (qe_get_num_of_snums() == 46) + if ((snums == 76) || (snums == 46)) ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6; else ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4; diff --git a/drivers/net/ethernet/fujitsu/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c index 586b46f..3d94797 100644 --- a/drivers/net/ethernet/fujitsu/at1700.c +++ b/drivers/net/ethernet/fujitsu/at1700.c @@ -52,7 +52,6 @@ #include <linux/crc32.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/fujitsu/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c index c3f0178..a992d1f 100644 --- a/drivers/net/ethernet/fujitsu/eth16i.c +++ b/drivers/net/ethernet/fujitsu/eth16i.c @@ -163,7 +163,6 @@ static char *version = #include <linux/jiffies.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c index 0230319..2418faf 100644 --- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c +++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c @@ -57,7 +57,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/system.h> /*====================================================================*/ diff --git a/drivers/net/ethernet/i825xx/3c507.c b/drivers/net/ethernet/i825xx/3c507.c index ed6925f..e8984b05 100644 --- a/drivers/net/ethernet/i825xx/3c507.c +++ b/drivers/net/ethernet/i825xx/3c507.c @@ -63,7 +63,6 @@ static const char version[] = #include <asm/dma.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/uaccess.h> /* use 0 for production, 1 for verification, 2..7 for debug */ diff --git a/drivers/net/ethernet/i825xx/3c527.c b/drivers/net/ethernet/i825xx/3c527.c index ef43f3e..278e791 100644 --- a/drivers/net/ethernet/i825xx/3c527.c +++ b/drivers/net/ethernet/i825xx/3c527.c @@ -106,7 +106,6 @@ DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Richard Procter <rnp@paradise.net. #include <linux/semaphore.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/i825xx/eepro.c b/drivers/net/ethernet/i825xx/eepro.c index 7a4ad4a..7f49fd5 100644 --- a/drivers/net/ethernet/i825xx/eepro.c +++ b/drivers/net/ethernet/i825xx/eepro.c @@ -148,7 +148,6 @@ static const char version[] = #include <linux/bitops.h> #include <linux/ethtool.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/i825xx/eexpress.c b/drivers/net/ethernet/i825xx/eexpress.c index 3fc649e..cc2e66a 100644 --- a/drivers/net/ethernet/i825xx/eexpress.c +++ b/drivers/net/ethernet/i825xx/eexpress.c @@ -116,7 +116,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/net/ethernet/i825xx/ether1.c b/drivers/net/ethernet/i825xx/ether1.c index 406a12b..067db3f 100644 --- a/drivers/net/ethernet/i825xx/ether1.c +++ b/drivers/net/ethernet/i825xx/ether1.c @@ -48,7 +48,6 @@ #include <linux/skbuff.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/ecard.h> diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c index a436497..bd1f1ef 100644 --- a/drivers/net/ethernet/i825xx/znet.c +++ b/drivers/net/ethernet/i825xx/znet.c @@ -100,7 +100,6 @@ #include <linux/if_arp.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index e877371..9010cea 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -1616,11 +1616,8 @@ static struct vio_driver ibmveth_driver = { .probe = ibmveth_probe, .remove = ibmveth_remove, .get_desired_dma = ibmveth_get_desired_dma, - .driver = { - .name = ibmveth_driver_name, - .owner = THIS_MODULE, - .pm = &ibmveth_pm_ops, - } + .name = ibmveth_driver_name, + .pm = &ibmveth_pm_ops, }; static int __init ibmveth_module_init(void) diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index f30db1c..bc58f1d 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -55,7 +55,6 @@ #include <linux/crc32.h> #include <asm/bootinfo.h> -#include <asm/system.h> #include <asm/bitops.h> #include <asm/pgtable.h> #include <asm/io.h> diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 75af1af..5e1ca0f 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -57,7 +57,6 @@ #include <linux/types.h> #include <linux/inet_lro.h> #include <linux/slab.h> -#include <asm/system.h> static char mv643xx_eth_driver_name[] = "mv643xx_eth"; static char mv643xx_eth_driver_version[] = "1.4"; diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 45a6333..efec6b6 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -43,7 +43,6 @@ #include <linux/interrupt.h> #include <linux/types.h> #include <asm/pgtable.h> -#include <asm/system.h> #include <asm/cacheflush.h> #include <linux/pxa168_eth.h> diff --git a/drivers/net/ethernet/micrel/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c index 0686b93..f84dd2d 100644 --- a/drivers/net/ethernet/micrel/ks8842.c +++ b/drivers/net/ethernet/micrel/ks8842.c @@ -458,7 +458,7 @@ static int ks8842_tx_frame_dma(struct sk_buff *skb, struct net_device *netdev) if (sg_dma_len(&ctl->sg) % 4) sg_dma_len(&ctl->sg) += 4 - sg_dma_len(&ctl->sg) % 4; - ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan, + ctl->adesc = dmaengine_prep_slave_sg(ctl->chan, &ctl->sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP); if (!ctl->adesc) @@ -570,7 +570,7 @@ static int __ks8842_start_new_rx_dma(struct net_device *netdev) sg_dma_len(sg) = DMA_BUFFER_SIZE; - ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan, + ctl->adesc = dmaengine_prep_slave_sg(ctl->chan, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP); diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c index 5b89fd3..95dd39f 100644 --- a/drivers/net/ethernet/natsemi/jazzsonic.c +++ b/drivers/net/ethernet/natsemi/jazzsonic.c @@ -38,7 +38,6 @@ #include <linux/slab.h> #include <asm/bootinfo.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c index e640e23..b9680ba 100644 --- a/drivers/net/ethernet/natsemi/macsonic.c +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -53,7 +53,6 @@ #include <linux/slab.h> #include <asm/bootinfo.h> -#include <asm/system.h> #include <asm/pgtable.h> #include <asm/io.h> #include <asm/hwtest.h> diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c index c24b46c..d52728b 100644 --- a/drivers/net/ethernet/natsemi/ns83820.c +++ b/drivers/net/ethernet/natsemi/ns83820.c @@ -121,7 +121,6 @@ #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/system.h> #define DRV_NAME "ns83820" diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index 22a8de0..6338ef8 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -81,7 +81,6 @@ #include <linux/prefetch.h> #include <net/tcp.h> -#include <asm/system.h> #include <asm/div64.h> #include <asm/irq.h> diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 8561dd2..aca1304 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -69,7 +69,6 @@ #include <linux/io.h> #include <asm/irq.h> -#include <asm/system.h> #define TX_WORK_PER_LOOP 64 #define RX_WORK_PER_LOOP 64 diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c index 46c1932..e02f04d 100644 --- a/drivers/net/ethernet/realtek/atp.c +++ b/drivers/net/ethernet/realtek/atp.c @@ -140,7 +140,6 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */ #include <linux/delay.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 27c358c..7b23554 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -29,7 +29,6 @@ #include <linux/pci-aspm.h> #include <linux/prefetch.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c index 7b819bd..df808ac 100644 --- a/drivers/net/ethernet/seeq/ether3.c +++ b/drivers/net/ethernet/seeq/ether3.c @@ -64,7 +64,6 @@ #include <linux/delay.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/ecard.h> #include <asm/io.h> diff --git a/drivers/net/ethernet/seeq/seeq8005.c b/drivers/net/ethernet/seeq/seeq8005.c index 7989907..698edbb 100644 --- a/drivers/net/ethernet/seeq/seeq8005.c +++ b/drivers/net/ethernet/seeq/seeq8005.c @@ -47,7 +47,6 @@ static const char version[] = #include <linux/bitops.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> diff --git a/drivers/net/ethernet/sfc/mtd.c b/drivers/net/ethernet/sfc/mtd.c index 26b3c23..7581483 100644 --- a/drivers/net/ethernet/sfc/mtd.c +++ b/drivers/net/ethernet/sfc/mtd.c @@ -193,7 +193,7 @@ static int efx_mtd_erase(struct mtd_info *mtd, struct erase_info *erase) erase->state = MTD_ERASE_DONE; } else { erase->state = MTD_ERASE_FAILED; - erase->fail_addr = 0xffffffff; + erase->fail_addr = MTD_FAIL_ADDR_UNKNOWN; } mtd_erase_callback(erase); return rc; @@ -263,10 +263,10 @@ static int efx_mtd_probe_device(struct efx_nic *efx, struct efx_mtd *efx_mtd) part->mtd.owner = THIS_MODULE; part->mtd.priv = efx_mtd; part->mtd.name = part->name; - part->mtd.erase = efx_mtd_erase; - part->mtd.read = efx_mtd->ops->read; - part->mtd.write = efx_mtd->ops->write; - part->mtd.sync = efx_mtd_sync; + part->mtd._erase = efx_mtd_erase; + part->mtd._read = efx_mtd->ops->read; + part->mtd._write = efx_mtd->ops->write; + part->mtd._sync = efx_mtd_sync; if (mtd_device_register(&part->mtd, NULL, 0)) goto fail; diff --git a/drivers/net/ethernet/smsc/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c index d12e48a..04393b5 100644 --- a/drivers/net/ethernet/smsc/smc91c92_cs.c +++ b/drivers/net/ethernet/smsc/smc91c92_cs.c @@ -53,7 +53,6 @@ #include <pcmcia/ss.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/uaccess.h> /*====================================================================*/ diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 1dc4fad..fee4493 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2280,7 +2280,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev) if (ret) goto out_release_io; #if defined(CONFIG_SA1100_ASSABET) - NCR_0 |= NCR_ENET_OSC_EN; + neponset_ncr_set(NCR_ENET_OSC_EN); #endif platform_set_drvdata(pdev, ndev); ret = smc_enable_device(pdev); diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index 3c22955..ce4df61 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -99,7 +99,6 @@ #include <net/checksum.h> #include <linux/atomic.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/byteorder.h> #include <asm/uaccess.h> diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index f359863..2a83fc5 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -35,7 +35,6 @@ #include <asm/openprom.h> #include <asm/oplib.h> #include <asm/pgtable.h> -#include <asm/system.h> #include "sunbmac.h" diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index ba04159..558409f 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -41,7 +41,6 @@ #include <linux/mm.h> #include <linux/gfp.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/byteorder.h> #include <asm/uaccess.h> diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index 8b627e2..b95e7e6 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -36,7 +36,6 @@ #include <linux/bitops.h> #include <linux/dma-mapping.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/byteorder.h> diff --git a/drivers/net/ethernet/sun/sunqe.c b/drivers/net/ethernet/sun/sunqe.c index 139d6b4..7d4a040 100644 --- a/drivers/net/ethernet/sun/sunqe.c +++ b/drivers/net/ethernet/sun/sunqe.c @@ -28,7 +28,6 @@ #include <linux/of.h> #include <linux/of_device.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/byteorder.h> diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index 92a037a..38e3ae9 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1259,10 +1259,7 @@ static struct vio_driver vnet_port_driver = { .id_table = vnet_port_match, .probe = vnet_port_probe, .remove = vnet_port_remove, - .driver = { - .name = "vnet_port", - .owner = THIS_MODULE, - } + .name = "vnet_port", }; static int __init vnet_init(void) diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c index 840e0e9..277c93e 100644 --- a/drivers/net/ethernet/tundra/tsi108_eth.c +++ b/drivers/net/ethernet/tundra/tsi108_eth.c @@ -50,7 +50,6 @@ #include <linux/platform_device.h> #include <linux/gfp.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/tsi108.h> diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c index 5c69c6f..94a1f94 100644 --- a/drivers/net/ethernet/xircom/xirc2ps_cs.c +++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c @@ -89,7 +89,6 @@ #include <pcmcia/ciscode.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/uaccess.h> #ifndef MANFID_COMPAQ diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 2a5a34d..64783a0 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -13,7 +13,6 @@ */ #include <linux/module.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <linux/bitops.h> #include <linux/string.h> diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c index f1aea0c..acb6369 100644 --- a/drivers/net/hamradio/baycom_par.c +++ b/drivers/net/hamradio/baycom_par.c @@ -86,7 +86,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <asm/system.h> #include <asm/uaccess.h> /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index 18d8aff..76d5477 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -69,7 +69,6 @@ #include <linux/if_arp.h> #include <linux/skbuff.h> #include <net/sock.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <linux/mm.h> #include <linux/interrupt.h> diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index bc02968..aed1a61 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -17,7 +17,6 @@ * Copyright (C) 2004, 05 Thomas Osterried DL9SAU <thomas@x-berg.in-berlin.de> */ #include <linux/module.h> -#include <asm/system.h> #include <linux/bitops.h> #include <asm/uaccess.h> #include <linux/crc16.h> diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c index 3365581..efc6c97 100644 --- a/drivers/net/hamradio/scc.c +++ b/drivers/net/hamradio/scc.c @@ -177,7 +177,6 @@ #include <net/ax25.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/uaccess.h> diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c index 6963277..5a6412e 100644 --- a/drivers/net/hamradio/yam.c +++ b/drivers/net/hamradio/yam.c @@ -52,7 +52,6 @@ #include <linux/bitops.h> #include <linux/random.h> #include <asm/io.h> -#include <asm/system.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/firmware.h> diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index 2a51363..168c8f4 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -43,7 +43,6 @@ #include <linux/slab.h> #include <net/sock.h> -#include <asm/system.h> #include <asm/cache.h> #include <asm/byteorder.h> #include <asm/io.h> diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index e535137..4680478 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -356,7 +356,7 @@ config VLSI_FIR config SA1100_FIR tristate "SA1100 Internal IR" - depends on ARCH_SA1100 && IRDA + depends on ARCH_SA1100 && IRDA && DMA_SA11X0 config VIA_FIR tristate "VIA VT8231/VT1211 SIR/MIR/FIR" diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index 617a446..4351296 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -156,7 +156,6 @@ #include <linux/pci.h> #include <linux/rtnetlink.h> -#include <asm/system.h> #include <asm/io.h> #include <net/irda/wrapper.h> diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index da27050..a0d1913 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -15,7 +15,7 @@ * This driver takes one kernel command line parameter, sa1100ir=, with * the following options: * max_rate:baudrate - set the maximum baud rate - * power_leve:level - set the transmitter power level + * power_level:level - set the transmitter power level * tx_lpm:0|1 - set transmit low power mode */ #include <linux/module.h> @@ -30,13 +30,13 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/sa11x0-dma.h> #include <net/irda/irda.h> #include <net/irda/wrapper.h> #include <net/irda/irda_device.h> -#include <asm/irq.h> -#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach/irda.h> @@ -44,8 +44,15 @@ static int power_level = 3; static int tx_lpm; static int max_rate = 4000000; +struct sa1100_buf { + struct device *dev; + struct sk_buff *skb; + struct scatterlist sg; + struct dma_chan *chan; + dma_cookie_t cookie; +}; + struct sa1100_irda { - unsigned char hscr0; unsigned char utcr4; unsigned char power; unsigned char open; @@ -53,12 +60,8 @@ struct sa1100_irda { int speed; int newspeed; - struct sk_buff *txskb; - struct sk_buff *rxskb; - dma_addr_t txbuf_dma; - dma_addr_t rxbuf_dma; - dma_regs_t *txdma; - dma_regs_t *rxdma; + struct sa1100_buf dma_rx; + struct sa1100_buf dma_tx; struct device *dev; struct irda_platform_data *pdata; @@ -67,23 +70,103 @@ struct sa1100_irda { iobuff_t tx_buff; iobuff_t rx_buff; + + int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *); + irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *); }; +static int sa1100_irda_set_speed(struct sa1100_irda *, int); + #define IS_FIR(si) ((si)->speed >= 4000000) #define HPSIR_MAX_RXLEN 2047 +static struct dma_slave_config sa1100_irda_sir_tx = { + .direction = DMA_TO_DEVICE, + .dst_addr = __PREG(Ser2UTDR), + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .dst_maxburst = 4, +}; + +static struct dma_slave_config sa1100_irda_fir_rx = { + .direction = DMA_FROM_DEVICE, + .src_addr = __PREG(Ser2HSDR), + .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .src_maxburst = 8, +}; + +static struct dma_slave_config sa1100_irda_fir_tx = { + .direction = DMA_TO_DEVICE, + .dst_addr = __PREG(Ser2HSDR), + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .dst_maxburst = 8, +}; + +static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf) +{ + struct dma_chan *chan = buf->chan; + struct dma_tx_state state; + enum dma_status status; + + status = chan->device->device_tx_status(chan, buf->cookie, &state); + if (status != DMA_PAUSED) + return 0; + + return sg_dma_len(&buf->sg) - state.residue; +} + +static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf, + const char *name, struct dma_slave_config *cfg) +{ + dma_cap_mask_t m; + int ret; + + dma_cap_zero(m); + dma_cap_set(DMA_SLAVE, m); + + buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name); + if (!buf->chan) { + dev_err(dev, "unable to request DMA channel for %s\n", + name); + return -ENOENT; + } + + ret = dmaengine_slave_config(buf->chan, cfg); + if (ret) + dev_warn(dev, "DMA slave_config for %s returned %d\n", + name, ret); + + buf->dev = buf->chan->device->dev; + + return 0; +} + +static void sa1100_irda_dma_start(struct sa1100_buf *buf, + enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p) +{ + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = buf->chan; + + desc = chan->device->device_prep_slave_sg(chan, &buf->sg, 1, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (desc) { + desc->callback = cb; + desc->callback_param = cb_p; + buf->cookie = dmaengine_submit(desc); + dma_async_issue_pending(chan); + } +} + /* * Allocate and map the receive buffer, unless it is already allocated. */ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) { - if (si->rxskb) + if (si->dma_rx.skb) return 0; - si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC); - - if (!si->rxskb) { + si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC); + if (!si->dma_rx.skb) { printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n"); return -ENOMEM; } @@ -92,11 +175,14 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) * Align any IP headers that may be contained * within the frame. */ - skb_reserve(si->rxskb, 1); + skb_reserve(si->dma_rx.skb, 1); + + sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN); + if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) { + dev_kfree_skb_any(si->dma_rx.skb); + return -ENOMEM; + } - si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data, - HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); return 0; } @@ -106,7 +192,7 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) */ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si) { - if (!si->rxskb) { + if (!si->dma_rx.skb) { printk(KERN_ERR "sa1100_ir: rx buffer went missing\n"); return; } @@ -114,254 +200,87 @@ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si) /* * First empty receive FIFO */ - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; + Ser2HSCR0 = HSCR0_HSSP; /* * Enable the DMA, receiver and receive interrupt. */ - sa1100_clear_dma(si->rxdma); - sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN); - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE; + dmaengine_terminate_all(si->dma_rx.chan); + sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL); + + Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE; } -/* - * Set the IrDA communications speed. - */ -static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed) +static void sa1100_irda_check_speed(struct sa1100_irda *si) { - unsigned long flags; - int brd, ret = -EINVAL; - - switch (speed) { - case 9600: case 19200: case 38400: - case 57600: case 115200: - brd = 3686400 / (16 * speed) - 1; - - /* - * Stop the receive DMA. - */ - if (IS_FIR(si)) - sa1100_stop_dma(si->rxdma); - - local_irq_save(flags); - - Ser2UTCR3 = 0; - Ser2HSCR0 = HSCR0_UART; - - Ser2UTCR1 = brd >> 8; - Ser2UTCR2 = brd; - - /* - * Clear status register - */ - Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; - Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; - - if (si->pdata->set_speed) - si->pdata->set_speed(si->dev, speed); - - si->speed = speed; - - local_irq_restore(flags); - ret = 0; - break; - - case 4000000: - local_irq_save(flags); - - si->hscr0 = 0; - - Ser2HSSR0 = 0xff; - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; - Ser2UTCR3 = 0; - - si->speed = speed; - - if (si->pdata->set_speed) - si->pdata->set_speed(si->dev, speed); - - sa1100_irda_rx_alloc(si); - sa1100_irda_rx_dma_start(si); - - local_irq_restore(flags); - - break; - - default: - break; + if (si->newspeed) { + sa1100_irda_set_speed(si, si->newspeed); + si->newspeed = 0; } - - return ret; } /* - * Control the power state of the IrDA transmitter. - * State: - * 0 - off - * 1 - short range, lowest power - * 2 - medium range, medium power - * 3 - maximum range, high power - * - * Currently, only assabet is known to support this. + * HP-SIR format support. */ -static int -__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state) +static void sa1100_irda_sirtxdma_irq(void *id) { - int ret = 0; - if (si->pdata->set_power) - ret = si->pdata->set_power(si->dev, state); - return ret; -} - -static inline int -sa1100_set_power(struct sa1100_irda *si, unsigned int state) -{ - int ret; - - ret = __sa1100_irda_set_power(si, state); - if (ret == 0) - si->power = state; + struct net_device *dev = id; + struct sa1100_irda *si = netdev_priv(dev); - return ret; -} + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE); + dev_kfree_skb(si->dma_tx.skb); + si->dma_tx.skb = NULL; -static int sa1100_irda_startup(struct sa1100_irda *si) -{ - int ret; + dev->stats.tx_packets++; + dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg); - /* - * Ensure that the ports for this device are setup correctly. - */ - if (si->pdata->startup) { - ret = si->pdata->startup(si->dev); - if (ret) - return ret; - } - - /* - * Configure PPC for IRDA - we want to drive TXD2 low. - * We also want to drive this pin low during sleep. - */ - PPSR &= ~PPC_TXD2; - PSDR &= ~PPC_TXD2; - PPDR |= PPC_TXD2; - - /* - * Enable HP-SIR modulation, and ensure that the port is disabled. - */ - Ser2UTCR3 = 0; - Ser2HSCR0 = HSCR0_UART; - Ser2UTCR4 = si->utcr4; - Ser2UTCR0 = UTCR0_8BitData; - Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL; + /* We need to ensure that the transmitter has finished. */ + do + rmb(); + while (Ser2UTSR1 & UTSR1_TBY); /* - * Clear status register + * Ok, we've finished transmitting. Now enable the receiver. + * Sometimes we get a receive IRQ immediately after a transmit... */ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; - ret = sa1100_irda_set_speed(si, si->speed = 9600); - if (ret) { - Ser2UTCR3 = 0; - Ser2HSCR0 = 0; - - if (si->pdata->shutdown) - si->pdata->shutdown(si->dev); - } - - return ret; -} - -static void sa1100_irda_shutdown(struct sa1100_irda *si) -{ - /* - * Stop all DMA activity. - */ - sa1100_stop_dma(si->rxdma); - sa1100_stop_dma(si->txdma); - - /* Disable the port. */ - Ser2UTCR3 = 0; - Ser2HSCR0 = 0; + sa1100_irda_check_speed(si); - if (si->pdata->shutdown) - si->pdata->shutdown(si->dev); + /* I'm hungry! */ + netif_wake_queue(dev); } -#ifdef CONFIG_PM -/* - * Suspend the IrDA interface. - */ -static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state) +static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev, + struct sa1100_irda *si) { - struct net_device *dev = platform_get_drvdata(pdev); - struct sa1100_irda *si; - - if (!dev) - return 0; - - si = netdev_priv(dev); - if (si->open) { - /* - * Stop the transmit queue - */ - netif_device_detach(dev); - disable_irq(dev->irq); - sa1100_irda_shutdown(si); - __sa1100_irda_set_power(si, 0); + si->tx_buff.data = si->tx_buff.head; + si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, + si->tx_buff.truesize); + + si->dma_tx.skb = skb; + sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len); + if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) { + si->dma_tx.skb = NULL; + netif_wake_queue(dev); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; } - return 0; -} - -/* - * Resume the IrDA interface. - */ -static int sa1100_irda_resume(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct sa1100_irda *si; - - if (!dev) - return 0; + sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev); - si = netdev_priv(dev); - if (si->open) { - /* - * If we missed a speed change, initialise at the new speed - * directly. It is debatable whether this is actually - * required, but in the interests of continuing from where - * we left off it is desirable. The converse argument is - * that we should re-negotiate at 9600 baud again. - */ - if (si->newspeed) { - si->speed = si->newspeed; - si->newspeed = 0; - } - - sa1100_irda_startup(si); - __sa1100_irda_set_power(si, si->power); - enable_irq(dev->irq); - - /* - * This automatically wakes up the queue - */ - netif_device_attach(dev); - } + /* + * The mean turn-around time is enforced by XBOF padding, + * so we don't have to do anything special here. + */ + Ser2UTCR3 = UTCR3_TXE; - return 0; + return NETDEV_TX_OK; } -#else -#define sa1100_irda_suspend NULL -#define sa1100_irda_resume NULL -#endif -/* - * HP-SIR format interrupt service routines. - */ -static void sa1100_irda_hpsir_irq(struct net_device *dev) +static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si) { - struct sa1100_irda *si = netdev_priv(dev); int status; status = Ser2UTSR0; @@ -414,51 +333,96 @@ static void sa1100_irda_hpsir_irq(struct net_device *dev) } - if (status & UTSR0_TFS && si->tx_buff.len) { - /* - * Transmitter FIFO is not full - */ - do { - Ser2UTDR = *si->tx_buff.data++; - si->tx_buff.len -= 1; - } while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len); + return IRQ_HANDLED; +} - if (si->tx_buff.len == 0) { - dev->stats.tx_packets++; - dev->stats.tx_bytes += si->tx_buff.data - - si->tx_buff.head; +/* + * FIR format support. + */ +static void sa1100_irda_firtxdma_irq(void *id) +{ + struct net_device *dev = id; + struct sa1100_irda *si = netdev_priv(dev); + struct sk_buff *skb; - /* - * We need to ensure that the transmitter has - * finished. - */ - do - rmb(); - while (Ser2UTSR1 & UTSR1_TBY); + /* + * Wait for the transmission to complete. Unfortunately, + * the hardware doesn't give us an interrupt to indicate + * "end of frame". + */ + do + rmb(); + while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY); - /* - * Ok, we've finished transmitting. Now enable - * the receiver. Sometimes we get a receive IRQ - * immediately after a transmit... - */ - Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; - Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; + /* + * Clear the transmit underrun bit. + */ + Ser2HSSR0 = HSSR0_TUR; - if (si->newspeed) { - sa1100_irda_set_speed(si, si->newspeed); - si->newspeed = 0; - } + /* + * Do we need to change speed? Note that we're lazy + * here - we don't free the old dma_rx.skb. We don't need + * to allocate a buffer either. + */ + sa1100_irda_check_speed(si); - /* I'm hungry! */ - netif_wake_queue(dev); - } + /* + * Start reception. This disables the transmitter for + * us. This will be using the existing RX buffer. + */ + sa1100_irda_rx_dma_start(si); + + /* Account and free the packet. */ + skb = si->dma_tx.skb; + if (skb) { + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, + DMA_TO_DEVICE); + dev->stats.tx_packets ++; + dev->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + si->dma_tx.skb = NULL; } + + /* + * Make sure that the TX queue is available for sending + * (for retries). TX has priority over RX at all times. + */ + netif_wake_queue(dev); +} + +static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev, + struct sa1100_irda *si) +{ + int mtt = irda_get_mtt(skb); + + si->dma_tx.skb = skb; + sg_set_buf(&si->dma_tx.sg, skb->data, skb->len); + if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) { + si->dma_tx.skb = NULL; + netif_wake_queue(dev); + dev->stats.tx_dropped++; + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev); + + /* + * If we have a mean turn-around time, impose the specified + * specified delay. We could shorten this by timing from + * the point we received the packet. + */ + if (mtt) + udelay(mtt); + + Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE; + + return NETDEV_TX_OK; } static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev) { - struct sk_buff *skb = si->rxskb; - dma_addr_t dma_addr; + struct sk_buff *skb = si->dma_rx.skb; unsigned int len, stat, data; if (!skb) { @@ -469,11 +433,10 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev /* * Get the current data position. */ - dma_addr = sa1100_get_dma_pos(si->rxdma); - len = dma_addr - si->rxbuf_dma; + len = sa1100_irda_dma_xferred(&si->dma_rx); if (len > HPSIR_MAX_RXLEN) len = HPSIR_MAX_RXLEN; - dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE); + dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE); do { /* @@ -501,7 +464,7 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev } while (Ser2HSSR0 & HSSR0_EIF); if (stat & HSSR1_EOF) { - si->rxskb = NULL; + si->dma_rx.skb = NULL; skb_put(skb, len); skb->dev = dev; @@ -518,28 +481,23 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev netif_rx(skb); } else { /* - * Remap the buffer. + * Remap the buffer - it was previously mapped, and we + * hope that this succeeds. */ - si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data, - HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); + dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE); } } /* - * FIR format interrupt service routine. We only have to - * handle RX events; transmit events go via the TX DMA handler. - * - * No matter what, we disable RX, process, and the restart RX. + * We only have to handle RX events here; transmit events go via the TX + * DMA handler. We disable RX, process, and the restart RX. */ -static void sa1100_irda_fir_irq(struct net_device *dev) +static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si) { - struct sa1100_irda *si = netdev_priv(dev); - /* * Stop RX DMA */ - sa1100_stop_dma(si->rxdma); + dmaengine_pause(si->dma_rx.chan); /* * Framing error - we throw away the packet completely. @@ -555,7 +513,7 @@ static void sa1100_irda_fir_irq(struct net_device *dev) /* * Clear out the DMA... */ - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; + Ser2HSCR0 = HSCR0_HSSP; /* * Clear selected status bits now, so we @@ -577,74 +535,124 @@ static void sa1100_irda_fir_irq(struct net_device *dev) * No matter what happens, we must restart reception. */ sa1100_irda_rx_dma_start(si); -} -static irqreturn_t sa1100_irda_irq(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - if (IS_FIR(((struct sa1100_irda *)netdev_priv(dev)))) - sa1100_irda_fir_irq(dev); - else - sa1100_irda_hpsir_irq(dev); return IRQ_HANDLED; } /* - * TX DMA completion handler. + * Set the IrDA communications speed. */ -static void sa1100_irda_txdma_irq(void *id) +static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed) { - struct net_device *dev = id; - struct sa1100_irda *si = netdev_priv(dev); - struct sk_buff *skb = si->txskb; + unsigned long flags; + int brd, ret = -EINVAL; - si->txskb = NULL; + switch (speed) { + case 9600: case 19200: case 38400: + case 57600: case 115200: + brd = 3686400 / (16 * speed) - 1; - /* - * Wait for the transmission to complete. Unfortunately, - * the hardware doesn't give us an interrupt to indicate - * "end of frame". - */ - do - rmb(); - while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY); + /* Stop the receive DMA, and configure transmit. */ + if (IS_FIR(si)) { + dmaengine_terminate_all(si->dma_rx.chan); + dmaengine_slave_config(si->dma_tx.chan, + &sa1100_irda_sir_tx); + } - /* - * Clear the transmit underrun bit. - */ - Ser2HSSR0 = HSSR0_TUR; + local_irq_save(flags); - /* - * Do we need to change speed? Note that we're lazy - * here - we don't free the old rxskb. We don't need - * to allocate a buffer either. - */ - if (si->newspeed) { - sa1100_irda_set_speed(si, si->newspeed); - si->newspeed = 0; - } + Ser2UTCR3 = 0; + Ser2HSCR0 = HSCR0_UART; - /* - * Start reception. This disables the transmitter for - * us. This will be using the existing RX buffer. - */ - sa1100_irda_rx_dma_start(si); + Ser2UTCR1 = brd >> 8; + Ser2UTCR2 = brd; - /* - * Account and free the packet. - */ - if (skb) { - dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE); - dev->stats.tx_packets ++; - dev->stats.tx_bytes += skb->len; - dev_kfree_skb_irq(skb); + /* + * Clear status register + */ + Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; + + if (si->pdata->set_speed) + si->pdata->set_speed(si->dev, speed); + + si->speed = speed; + si->tx_start = sa1100_irda_sir_tx_start; + si->irq = sa1100_irda_sir_irq; + + local_irq_restore(flags); + ret = 0; + break; + + case 4000000: + if (!IS_FIR(si)) + dmaengine_slave_config(si->dma_tx.chan, + &sa1100_irda_fir_tx); + + local_irq_save(flags); + + Ser2HSSR0 = 0xff; + Ser2HSCR0 = HSCR0_HSSP; + Ser2UTCR3 = 0; + + si->speed = speed; + si->tx_start = sa1100_irda_fir_tx_start; + si->irq = sa1100_irda_fir_irq; + + if (si->pdata->set_speed) + si->pdata->set_speed(si->dev, speed); + + sa1100_irda_rx_alloc(si); + sa1100_irda_rx_dma_start(si); + + local_irq_restore(flags); + + break; + + default: + break; } - /* - * Make sure that the TX queue is available for sending - * (for retries). TX has priority over RX at all times. - */ - netif_wake_queue(dev); + return ret; +} + +/* + * Control the power state of the IrDA transmitter. + * State: + * 0 - off + * 1 - short range, lowest power + * 2 - medium range, medium power + * 3 - maximum range, high power + * + * Currently, only assabet is known to support this. + */ +static int +__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state) +{ + int ret = 0; + if (si->pdata->set_power) + ret = si->pdata->set_power(si->dev, state); + return ret; +} + +static inline int +sa1100_set_power(struct sa1100_irda *si, unsigned int state) +{ + int ret; + + ret = __sa1100_irda_set_power(si, state); + if (ret == 0) + si->power = state; + + return ret; +} + +static irqreturn_t sa1100_irda_irq(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct sa1100_irda *si = netdev_priv(dev); + + return si->irq(dev, si); } static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) @@ -660,62 +668,19 @@ static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) if (speed != si->speed && speed != -1) si->newspeed = speed; - /* - * If this is an empty frame, we can bypass a lot. - */ + /* If this is an empty frame, we can bypass a lot. */ if (skb->len == 0) { - if (si->newspeed) { - si->newspeed = 0; - sa1100_irda_set_speed(si, speed); - } + sa1100_irda_check_speed(si); dev_kfree_skb(skb); return NETDEV_TX_OK; } - if (!IS_FIR(si)) { - netif_stop_queue(dev); - - si->tx_buff.data = si->tx_buff.head; - si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, - si->tx_buff.truesize); - - /* - * Set the transmit interrupt enable. This will fire - * off an interrupt immediately. Note that we disable - * the receiver so we won't get spurious characteres - * received. - */ - Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE; - - dev_kfree_skb(skb); - } else { - int mtt = irda_get_mtt(skb); - - /* - * We must not be transmitting... - */ - BUG_ON(si->txskb); - - netif_stop_queue(dev); - - si->txskb = skb; - si->txbuf_dma = dma_map_single(si->dev, skb->data, - skb->len, DMA_TO_DEVICE); - - sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len); - - /* - * If we have a mean turn-around time, impose the specified - * specified delay. We could shorten this by timing from - * the point we received the packet. - */ - if (mtt) - udelay(mtt); + netif_stop_queue(dev); - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE; - } + /* We must not already have a skb to transmit... */ + BUG_ON(si->dma_tx.skb); - return NETDEV_TX_OK; + return si->tx_start(skb, dev, si); } static int @@ -762,6 +727,69 @@ sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) return ret; } +static int sa1100_irda_startup(struct sa1100_irda *si) +{ + int ret; + + /* + * Ensure that the ports for this device are setup correctly. + */ + if (si->pdata->startup) { + ret = si->pdata->startup(si->dev); + if (ret) + return ret; + } + + /* + * Configure PPC for IRDA - we want to drive TXD2 low. + * We also want to drive this pin low during sleep. + */ + PPSR &= ~PPC_TXD2; + PSDR &= ~PPC_TXD2; + PPDR |= PPC_TXD2; + + /* + * Enable HP-SIR modulation, and ensure that the port is disabled. + */ + Ser2UTCR3 = 0; + Ser2HSCR0 = HSCR0_UART; + Ser2UTCR4 = si->utcr4; + Ser2UTCR0 = UTCR0_8BitData; + Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL; + + /* + * Clear status register + */ + Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + + ret = sa1100_irda_set_speed(si, si->speed = 9600); + if (ret) { + Ser2UTCR3 = 0; + Ser2HSCR0 = 0; + + if (si->pdata->shutdown) + si->pdata->shutdown(si->dev); + } + + return ret; +} + +static void sa1100_irda_shutdown(struct sa1100_irda *si) +{ + /* + * Stop all DMA activity. + */ + dmaengine_terminate_all(si->dma_rx.chan); + dmaengine_terminate_all(si->dma_tx.chan); + + /* Disable the port. */ + Ser2UTCR3 = 0; + Ser2HSCR0 = 0; + + if (si->pdata->shutdown) + si->pdata->shutdown(si->dev); +} + static int sa1100_irda_start(struct net_device *dev) { struct sa1100_irda *si = netdev_priv(dev); @@ -769,26 +797,17 @@ static int sa1100_irda_start(struct net_device *dev) si->speed = 9600; - err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev); - if (err) - goto err_irq; - - err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive", - NULL, NULL, &si->rxdma); + err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc", + &sa1100_irda_fir_rx); if (err) goto err_rx_dma; - err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit", - sa1100_irda_txdma_irq, dev, &si->txdma); + err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr", + &sa1100_irda_sir_tx); if (err) goto err_tx_dma; /* - * The interrupt must remain disabled for now. - */ - disable_irq(dev->irq); - - /* * Setup the serial port for the specified speed. */ err = sa1100_irda_startup(si); @@ -803,44 +822,60 @@ static int sa1100_irda_start(struct net_device *dev) if (!si->irlap) goto err_irlap; + err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev); + if (err) + goto err_irq; + /* * Now enable the interrupt and start the queue */ si->open = 1; sa1100_set_power(si, power_level); /* low power mode */ - enable_irq(dev->irq); + netif_start_queue(dev); return 0; +err_irq: + irlap_close(si->irlap); err_irlap: si->open = 0; sa1100_irda_shutdown(si); err_startup: - sa1100_free_dma(si->txdma); + dma_release_channel(si->dma_tx.chan); err_tx_dma: - sa1100_free_dma(si->rxdma); + dma_release_channel(si->dma_rx.chan); err_rx_dma: - free_irq(dev->irq, dev); -err_irq: return err; } static int sa1100_irda_stop(struct net_device *dev) { struct sa1100_irda *si = netdev_priv(dev); + struct sk_buff *skb; + + netif_stop_queue(dev); - disable_irq(dev->irq); + si->open = 0; sa1100_irda_shutdown(si); /* - * If we have been doing DMA receive, make sure we + * If we have been doing any DMA activity, make sure we * tidy that up cleanly. */ - if (si->rxskb) { - dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); - dev_kfree_skb(si->rxskb); - si->rxskb = NULL; + skb = si->dma_rx.skb; + if (skb) { + dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, + DMA_FROM_DEVICE); + dev_kfree_skb(skb); + si->dma_rx.skb = NULL; + } + + skb = si->dma_tx.skb; + if (skb) { + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, + DMA_TO_DEVICE); + dev_kfree_skb(skb); + si->dma_tx.skb = NULL; } /* Stop IrLAP */ @@ -849,14 +884,11 @@ static int sa1100_irda_stop(struct net_device *dev) si->irlap = NULL; } - netif_stop_queue(dev); - si->open = 0; - /* * Free resources */ - sa1100_free_dma(si->txdma); - sa1100_free_dma(si->rxdma); + dma_release_channel(si->dma_tx.chan); + dma_release_channel(si->dma_rx.chan); free_irq(dev->irq, dev); sa1100_set_power(si, 0); @@ -888,11 +920,15 @@ static int sa1100_irda_probe(struct platform_device *pdev) struct net_device *dev; struct sa1100_irda *si; unsigned int baudrate_mask; - int err; + int err, irq; if (!pdev->dev.platform_data) return -EINVAL; + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return irq < 0 ? irq : -ENXIO; + err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY; if (err) goto err_mem_1; @@ -907,22 +943,27 @@ static int sa1100_irda_probe(struct platform_device *pdev) if (!dev) goto err_mem_4; + SET_NETDEV_DEV(dev, &pdev->dev); + si = netdev_priv(dev); si->dev = &pdev->dev; si->pdata = pdev->dev.platform_data; + sg_init_table(&si->dma_rx.sg, 1); + sg_init_table(&si->dma_tx.sg, 1); + /* * Initialise the HP-SIR buffers */ err = sa1100_irda_init_iobuf(&si->rx_buff, 14384); if (err) goto err_mem_5; - err = sa1100_irda_init_iobuf(&si->tx_buff, 4000); + err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME); if (err) goto err_mem_5; dev->netdev_ops = &sa1100_irda_netdev_ops; - dev->irq = IRQ_Ser2ICP; + dev->irq = irq; irda_init_max_qos_capabilies(&si->qos); @@ -996,6 +1037,74 @@ static int sa1100_irda_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +/* + * Suspend the IrDA interface. + */ +static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sa1100_irda *si; + + if (!dev) + return 0; + + si = netdev_priv(dev); + if (si->open) { + /* + * Stop the transmit queue + */ + netif_device_detach(dev); + disable_irq(dev->irq); + sa1100_irda_shutdown(si); + __sa1100_irda_set_power(si, 0); + } + + return 0; +} + +/* + * Resume the IrDA interface. + */ +static int sa1100_irda_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sa1100_irda *si; + + if (!dev) + return 0; + + si = netdev_priv(dev); + if (si->open) { + /* + * If we missed a speed change, initialise at the new speed + * directly. It is debatable whether this is actually + * required, but in the interests of continuing from where + * we left off it is desirable. The converse argument is + * that we should re-negotiate at 9600 baud again. + */ + if (si->newspeed) { + si->speed = si->newspeed; + si->newspeed = 0; + } + + sa1100_irda_startup(si); + __sa1100_irda_set_power(si, si->power); + enable_irq(dev->irq); + + /* + * This automatically wakes up the queue + */ + netif_device_attach(dev); + } + + return 0; +} +#else +#define sa1100_irda_suspend NULL +#define sa1100_irda_resume NULL +#endif + static struct platform_driver sa1100ir_driver = { .probe = sa1100_irda_probe, .remove = sa1100_irda_remove, diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index b71998d..32eb94e 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -41,7 +41,6 @@ #include <linux/in.h> #include <linux/init.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <asm/io.h> diff --git a/drivers/net/plip/plip.c b/drivers/net/plip/plip.c index 1a5a316..bed62d9 100644 --- a/drivers/net/plip/plip.c +++ b/drivers/net/plip/plip.c @@ -113,7 +113,6 @@ static const char version[] = "NET3 PLIP version 2.4-parport gniibe@mri.co.jp\n" #include <net/neighbour.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/byteorder.h> diff --git a/drivers/net/slip/slhc.c b/drivers/net/slip/slhc.c index 0a0a664..1252d9c 100644 --- a/drivers/net/slip/slhc.c +++ b/drivers/net/slip/slhc.c @@ -75,7 +75,6 @@ #include <linux/skbuff.h> #include <net/sock.h> #include <linux/timer.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <net/checksum.h> #include <asm/unaligned.h> diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 69345df..d4c9db3 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -64,7 +64,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <linux/bitops.h> #include <linux/sched.h> diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index d7c292a..b15ac81 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -68,7 +68,6 @@ #include <net/checksum.h> #include <asm/io.h> -#include <asm/system.h> #include "3c359.h" diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c index 515f122..b715e6b 100644 --- a/drivers/net/tokenring/abyss.c +++ b/drivers/net/tokenring/abyss.c @@ -33,7 +33,6 @@ #include <linux/netdevice.h> #include <linux/trdevice.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/net/tokenring/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c index 91b6846..356e28e 100644 --- a/drivers/net/tokenring/ibmtr_cs.c +++ b/drivers/net/tokenring/ibmtr_cs.c @@ -63,7 +63,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/system.h> #define PCMCIA #include "ibmtr.c" diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c index 8d71e0d..3e4b4f0 100644 --- a/drivers/net/tokenring/lanstreamer.c +++ b/drivers/net/tokenring/lanstreamer.c @@ -127,7 +127,6 @@ #include <net/checksum.h> #include <asm/io.h> -#include <asm/system.h> #include "lanstreamer.h" diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c index 1cdc034..28adcdf 100644 --- a/drivers/net/tokenring/madgemc.c +++ b/drivers/net/tokenring/madgemc.c @@ -28,7 +28,6 @@ static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n"; #include <linux/netdevice.h> #include <linux/trdevice.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c index fd8dce9..0e23474 100644 --- a/drivers/net/tokenring/olympic.c +++ b/drivers/net/tokenring/olympic.c @@ -106,7 +106,6 @@ #include <net/net_namespace.h> #include <asm/io.h> -#include <asm/system.h> #include "olympic.h" diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c index 8d362e6..62d90e4 100644 --- a/drivers/net/tokenring/proteon.c +++ b/drivers/net/tokenring/proteon.c @@ -31,7 +31,6 @@ static const char version[] = "proteon.c: v1.00 02/01/2003 by Jochen Friedrich\n #include <linux/trdevice.h> #include <linux/platform_device.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/pci.h> diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c index 46db5c5..ee11e93 100644 --- a/drivers/net/tokenring/skisa.c +++ b/drivers/net/tokenring/skisa.c @@ -38,7 +38,6 @@ static const char version[] = "skisa.c: v1.03 09/12/2002 by Jochen Friedrich\n"; #include <linux/trdevice.h> #include <linux/platform_device.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/pci.h> diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index 029846a..cb35fb7 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -49,7 +49,6 @@ #include <linux/bitops.h> #include <linux/firmware.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/irq.h> diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index 102f896..be4813e 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -98,7 +98,6 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A #include <linux/firmware.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/irq.h> diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c index d3e788a..fb9918d 100644 --- a/drivers/net/tokenring/tmspci.c +++ b/drivers/net/tokenring/tmspci.c @@ -34,7 +34,6 @@ #include <linux/netdevice.h> #include <linux/trdevice.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 74d7f76..bb8c72c 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -69,7 +69,6 @@ #include <net/rtnetlink.h> #include <net/sock.h> -#include <asm/system.h> #include <asm/uaccess.h> /* Uncomment to enable debugging */ diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 423eb26..d70ede7 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -290,8 +290,8 @@ config FARSYNC Frame Relay or X.25/LAPB. If you want the module to be automatically loaded when the interface - is referenced then you should add "alias hdlcX farsync" to - /etc/modprobe.conf for each interface, where X is 0, 1, 2, ..., or + is referenced then you should add "alias hdlcX farsync" to a file + in /etc/modprobe.d/ for each interface, where X is 0, 1, 2, ..., or simply use "alias hdlc* farsync" to indicate all of them. To compile this driver as a module, choose M here: the diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c index 48ab38a..147614e 100644 --- a/drivers/net/wan/dlci.c +++ b/drivers/net/wan/dlci.c @@ -50,7 +50,6 @@ #include <net/sock.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/uaccess.h> diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index fe8d060..c676de7 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -93,7 +93,6 @@ #include <linux/mm.h> #include <linux/slab.h> -#include <asm/system.h> #include <asm/cache.h> #include <asm/byteorder.h> #include <asm/uaccess.h> diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c index 33b67d8..cf49033 100644 --- a/drivers/net/wan/hd64570.c +++ b/drivers/net/wan/hd64570.c @@ -40,7 +40,6 @@ #include <linux/string.h> #include <linux/types.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/uaccess.h> #include "hd64570.h" diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c index efc0db1..e2779fa 100644 --- a/drivers/net/wan/hd64572.c +++ b/drivers/net/wan/hd64572.c @@ -40,7 +40,6 @@ #include <linux/string.h> #include <linux/types.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/uaccess.h> #include "hd64572.h" diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 7beeb9b..a73b49e 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -35,7 +35,6 @@ #include <linux/if_arp.h> #include <linux/skbuff.h> #include <net/sock.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <linux/mm.h> #include <linux/interrupt.h> diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c index c853161..de3bbf4 100644 --- a/drivers/net/wan/sdla.c +++ b/drivers/net/wan/sdla.c @@ -54,7 +54,6 @@ #include <linux/sdla.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/uaccess.h> diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index e862369..d7a65e1 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -18,7 +18,6 @@ #include <linux/module.h> -#include <asm/system.h> #include <linux/uaccess.h> #include <linux/bitops.h> #include <linux/string.h> diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index ddc061d..520a4b2 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -37,7 +37,6 @@ #include <linux/scatterlist.h> #include <linux/crypto.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <linux/netdevice.h> diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index c983c10..630577d 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -37,7 +37,6 @@ #include <pcmcia/ds.h> #include <linux/io.h> -#include <asm/system.h> #include "airo.h" diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 3010cee..6c87a82 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -50,7 +50,6 @@ #include <linux/timer.h> #include <asm/byteorder.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <linux/module.h> #include <linux/netdevice.h> diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index ec295c4..ded03d2 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -48,7 +48,6 @@ #include <pcmcia/ciscode.h> #include <asm/io.h> -#include <asm/system.h> #include <linux/wireless.h> #include "atmel.h" diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index 851fa10..c5404cb 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -24,7 +24,6 @@ #include <linux/slab.h> #include <asm/io.h> -#include <asm/system.h> #include <linux/if_arp.h> #include "prismcompat.h" diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 04fec1f..86a738b 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -53,7 +53,6 @@ #include <net/iw_handler.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <asm/uaccess.h> diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 98fbf54..00f6e69 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -53,7 +53,6 @@ #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/system.h> #include "wl3501.h" diff --git a/drivers/nubus/nubus.c b/drivers/nubus/nubus.c index b764ac22d..44d01af 100644 --- a/drivers/nubus/nubus.c +++ b/drivers/nubus/nubus.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/slab.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/page.h> #include <asm/hwtest.h> #include <linux/proc_fs.h> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 6ea51dc..8e84ce9 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -91,4 +91,8 @@ config OF_PCI_IRQ help OpenFirmware PCI IRQ routing helpers +config OF_MTD + depends on MTD + def_bool y + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index a73f5a5..aa90e60 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_OF_SELFTEST) += selftest.o obj-$(CONFIG_OF_MDIO) += of_mdio.o obj-$(CONFIG_OF_PCI) += of_pci.o obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o +obj-$(CONFIG_OF_MTD) += of_mtd.o diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c index 7e62d15..bba8121 100644 --- a/drivers/of/gpio.c +++ b/drivers/of/gpio.c @@ -78,8 +78,9 @@ err0: EXPORT_SYMBOL(of_get_named_gpio_flags); /** - * of_gpio_count - Count GPIOs for a device + * of_gpio_named_count - Count GPIOs for a device * @np: device node to count GPIOs for + * @propname: property name containing gpio specifier(s) * * The function returns the count of GPIOs specified for a node. * @@ -93,14 +94,14 @@ EXPORT_SYMBOL(of_get_named_gpio_flags); * defines four GPIOs (so this function will return 4), two of which * are not specified. */ -unsigned int of_gpio_count(struct device_node *np) +unsigned int of_gpio_named_count(struct device_node *np, const char* propname) { unsigned int cnt = 0; do { int ret; - ret = of_parse_phandle_with_args(np, "gpios", "#gpio-cells", + ret = of_parse_phandle_with_args(np, propname, "#gpio-cells", cnt, NULL); /* A hole in the gpios = <> counts anyway. */ if (ret < 0 && ret != -EEXIST) @@ -109,7 +110,7 @@ unsigned int of_gpio_count(struct device_node *np) return cnt; } -EXPORT_SYMBOL(of_gpio_count); +EXPORT_SYMBOL(of_gpio_named_count); /** * of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags @@ -228,7 +229,7 @@ void of_gpiochip_remove(struct gpio_chip *chip) } /* Private function for resolving node pointer to gpio_chip */ -static int of_gpiochip_is_match(struct gpio_chip *chip, void *data) +static int of_gpiochip_is_match(struct gpio_chip *chip, const void *data) { return chip->of_node == data; } diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c new file mode 100644 index 0000000..e7cad62 --- /dev/null +++ b/drivers/of/of_mtd.c @@ -0,0 +1,85 @@ +/* + * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * OF helpers for mtd. + * + * This file is released under the GPLv2 + * + */ +#include <linux/kernel.h> +#include <linux/of_mtd.h> +#include <linux/mtd/nand.h> +#include <linux/export.h> + +/** + * It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h + * into the device tree binding of 'nand-ecc', so that MTD + * device driver can get nand ecc from device tree. + */ +static const char *nand_ecc_modes[] = { + [NAND_ECC_NONE] = "none", + [NAND_ECC_SOFT] = "soft", + [NAND_ECC_HW] = "hw", + [NAND_ECC_HW_SYNDROME] = "hw_syndrome", + [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first", + [NAND_ECC_SOFT_BCH] = "soft_bch", +}; + +/** + * of_get_nand_ecc_mode - Get nand ecc mode for given device_node + * @np: Pointer to the given device_node + * + * The function gets ecc mode string from property 'nand-ecc-mode', + * and return its index in nand_ecc_modes table, or errno in error case. + */ +const int of_get_nand_ecc_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "nand-ecc-mode", &pm); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++) + if (!strcasecmp(pm, nand_ecc_modes[i])) + return i; + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode); + +/** + * of_get_nand_bus_width - Get nand bus witdh for given device_node + * @np: Pointer to the given device_node + * + * return bus width option, or errno in error case. + */ +int of_get_nand_bus_width(struct device_node *np) +{ + u32 val; + + if (of_property_read_u32(np, "nand-bus-width", &val)) + return 8; + + switch(val) { + case 8: + case 16: + return val; + default: + return -EIO; + } +} +EXPORT_SYMBOL_GPL(of_get_nand_bus_width); + +/** + * of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node + * @np: Pointer to the given device_node + * + * return true if present false other wise + */ +bool of_get_nand_on_flash_bbt(struct device_node *np) +{ + return of_property_read_bool(np, "nand-on-flash-bbt"); +} +EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt); diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 0610e91..432d4bb 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -55,7 +55,6 @@ #include <asm/pdc.h> #include <asm/page.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/hardware.h> diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 95930d0..1f9e9fe 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -140,7 +140,6 @@ #include <asm/pdc.h> #include <asm/pdcpat.h> #include <asm/page.h> -#include <asm/system.h> #include <asm/io.h> /* read/write functions */ #ifdef CONFIG_SUPERIO #include <asm/superio.h> diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index e885764..052fa23 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -43,7 +43,6 @@ #include <asm/pdc.h> #include <asm/pdcpat.h> #include <asm/page.h> -#include <asm/system.h> #include <asm/ropes.h> #include <asm/hardware.h> /* for register_parisc_driver() stuff */ diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 060fd22..0f150f2 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -277,40 +277,6 @@ static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) return 0; } -/** - * acpi_dev_run_wake - Enable/disable wake-up for given device. - * @phys_dev: Device to enable/disable the platform to wake-up the system for. - * @enable: Whether enable or disable the wake-up functionality. - * - * Find the ACPI device object corresponding to @pci_dev and try to - * enable/disable the GPE associated with it. - */ -static int acpi_dev_run_wake(struct device *phys_dev, bool enable) -{ - struct acpi_device *dev; - acpi_handle handle; - - if (!device_run_wake(phys_dev)) - return -EINVAL; - - handle = DEVICE_ACPI_HANDLE(phys_dev); - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) { - dev_dbg(phys_dev, "ACPI handle has no context in %s!\n", - __func__); - return -ENODEV; - } - - if (enable) { - acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0); - acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - } else { - acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - acpi_disable_wakeup_device_power(dev); - } - - return 0; -} - static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) { while (bus->parent) { @@ -318,14 +284,14 @@ static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable) if (bridge->pme_interrupt) return; - if (!acpi_dev_run_wake(&bridge->dev, enable)) + if (!acpi_pm_device_run_wake(&bridge->dev, enable)) return; bus = bus->parent; } /* We have reached the root bus. */ if (bus->bridge) - acpi_dev_run_wake(bus->bridge, enable); + acpi_pm_device_run_wake(bus->bridge, enable); } static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) @@ -333,7 +299,7 @@ static int acpi_pci_run_wake(struct pci_dev *dev, bool enable) if (dev->pme_interrupt) return 0; - if (!acpi_dev_run_wake(&dev->dev, enable)) + if (!acpi_pm_device_run_wake(&dev->dev, enable)) return 0; acpi_pci_propagate_run_wake(dev->bus, enable); diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 4bdef24..b500840 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -508,9 +508,6 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) int pos; u32 reg32; - if (aspm_disabled) - return 0; - /* * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot @@ -519,6 +516,16 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) pos = pci_pcie_cap(child); if (!pos) return -EINVAL; + + /* + * If ASPM is disabled then we're not going to change + * the BIOS state. It's safe to continue even if it's a + * pre-1.1 device + */ + + if (aspm_disabled) + continue; + /* * Disable ASPM for pre-1.1 PCIe device, we follow MS to use * RBER bit to determine if a function is 1.1 version device diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 1dd68f5..9694c1e 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -16,13 +16,13 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/slab.h> +#include <linux/gpio.h> #include <pcmcia/ss.h> #include <mach/hardware.h> #include <asm/io.h> #include <asm/sizes.h> -#include <asm/gpio.h> #include <mach/board.h> #include <mach/at91rm9200_mc.h> @@ -70,7 +70,7 @@ static irqreturn_t at91_cf_irq(int irq, void *_cf) { struct at91_cf_socket *cf = _cf; - if (irq == cf->board->det_pin) { + if (irq == gpio_to_irq(cf->board->det_pin)) { unsigned present = at91_cf_present(cf); /* kick pccard as needed */ @@ -96,8 +96,8 @@ static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp) /* NOTE: CF is always 3VCARD */ if (at91_cf_present(cf)) { - int rdy = cf->board->irq_pin; /* RDY/nIRQ */ - int vcc = cf->board->vcc_pin; + int rdy = gpio_is_valid(cf->board->irq_pin); /* RDY/nIRQ */ + int vcc = gpio_is_valid(cf->board->vcc_pin); *sp = SS_DETECT | SS_3VCARD; if (!rdy || gpio_get_value(rdy)) @@ -118,7 +118,7 @@ at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s) cf = container_of(sock, struct at91_cf_socket, socket); /* switch Vcc if needed and possible */ - if (cf->board->vcc_pin) { + if (gpio_is_valid(cf->board->vcc_pin)) { switch (s->Vcc) { case 0: gpio_set_value(cf->board->vcc_pin, 0); @@ -222,7 +222,7 @@ static int __init at91_cf_probe(struct platform_device *pdev) struct resource *io; int status; - if (!board || !board->det_pin || !board->rst_pin) + if (!board || !gpio_is_valid(board->det_pin) || !gpio_is_valid(board->rst_pin)) return -ENODEV; io = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -242,7 +242,7 @@ static int __init at91_cf_probe(struct platform_device *pdev) status = gpio_request(board->det_pin, "cf_det"); if (status < 0) goto fail0; - status = request_irq(board->det_pin, at91_cf_irq, 0, driver_name, cf); + status = request_irq(gpio_to_irq(board->det_pin), at91_cf_irq, 0, driver_name, cf); if (status < 0) goto fail00; device_init_wakeup(&pdev->dev, 1); @@ -251,7 +251,7 @@ static int __init at91_cf_probe(struct platform_device *pdev) if (status < 0) goto fail0a; - if (board->vcc_pin) { + if (gpio_is_valid(board->vcc_pin)) { status = gpio_request(board->vcc_pin, "cf_vcc"); if (status < 0) goto fail0b; @@ -263,15 +263,15 @@ static int __init at91_cf_probe(struct platform_device *pdev) * unless we report that we handle everything (sigh). * (Note: DK board doesn't wire the IRQ pin...) */ - if (board->irq_pin) { + if (gpio_is_valid(board->irq_pin)) { status = gpio_request(board->irq_pin, "cf_irq"); if (status < 0) goto fail0c; - status = request_irq(board->irq_pin, at91_cf_irq, + status = request_irq(gpio_to_irq(board->irq_pin), at91_cf_irq, IRQF_SHARED, driver_name, cf); if (status < 0) goto fail0d; - cf->socket.pci_irq = board->irq_pin; + cf->socket.pci_irq = gpio_to_irq(board->irq_pin); } else cf->socket.pci_irq = nr_irqs + 1; @@ -290,7 +290,7 @@ static int __init at91_cf_probe(struct platform_device *pdev) } pr_info("%s: irqs det #%d, io #%d\n", driver_name, - board->det_pin, board->irq_pin); + gpio_to_irq(board->det_pin), gpio_to_irq(board->irq_pin)); cf->socket.owner = THIS_MODULE; cf->socket.dev.parent = &pdev->dev; @@ -312,19 +312,19 @@ fail2: fail1: if (cf->socket.io_offset) iounmap((void __iomem *) cf->socket.io_offset); - if (board->irq_pin) { - free_irq(board->irq_pin, cf); + if (gpio_is_valid(board->irq_pin)) { + free_irq(gpio_to_irq(board->irq_pin), cf); fail0d: gpio_free(board->irq_pin); } fail0c: - if (board->vcc_pin) + if (gpio_is_valid(board->vcc_pin)) gpio_free(board->vcc_pin); fail0b: gpio_free(board->rst_pin); fail0a: device_init_wakeup(&pdev->dev, 0); - free_irq(board->det_pin, cf); + free_irq(gpio_to_irq(board->det_pin), cf); fail00: gpio_free(board->det_pin); fail0: @@ -341,15 +341,15 @@ static int __exit at91_cf_remove(struct platform_device *pdev) pcmcia_unregister_socket(&cf->socket); release_mem_region(io->start, resource_size(io)); iounmap((void __iomem *) cf->socket.io_offset); - if (board->irq_pin) { - free_irq(board->irq_pin, cf); + if (gpio_is_valid(board->irq_pin)) { + free_irq(gpio_to_irq(board->irq_pin), cf); gpio_free(board->irq_pin); } - if (board->vcc_pin) + if (gpio_is_valid(board->vcc_pin)) gpio_free(board->vcc_pin); gpio_free(board->rst_pin); device_init_wakeup(&pdev->dev, 0); - free_irq(board->det_pin, cf); + free_irq(gpio_to_irq(board->det_pin), cf); gpio_free(board->det_pin); kfree(cf); return 0; @@ -363,9 +363,9 @@ static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg) struct at91_cf_data *board = cf->board; if (device_may_wakeup(&pdev->dev)) { - enable_irq_wake(board->det_pin); - if (board->irq_pin) - enable_irq_wake(board->irq_pin); + enable_irq_wake(gpio_to_irq(board->det_pin)); + if (gpio_is_valid(board->irq_pin)) + enable_irq_wake(gpio_to_irq(board->irq_pin)); } return 0; } @@ -376,9 +376,9 @@ static int at91_cf_resume(struct platform_device *pdev) struct at91_cf_data *board = cf->board; if (device_may_wakeup(&pdev->dev)) { - disable_irq_wake(board->det_pin); - if (board->irq_pin) - disable_irq_wake(board->irq_pin); + disable_irq_wake(gpio_to_irq(board->det_pin)); + if (gpio_is_valid(board->irq_pin)) + disable_irq_wake(gpio_to_irq(board->irq_pin)); } return 0; diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c index 693577e..c2e997a 100644 --- a/drivers/pcmcia/bcm63xx_pcmcia.c +++ b/drivers/pcmcia/bcm63xx_pcmcia.c @@ -475,7 +475,7 @@ static void __devexit bcm63xx_cb_exit(struct pci_dev *dev) bcm63xx_cb_dev = NULL; } -static struct pci_device_id bcm63xx_cb_table[] = { +static DEFINE_PCI_DEVICE_TABLE(bcm63xx_cb_table) = { { .vendor = PCI_VENDOR_ID_BROADCOM, .device = BCM6348_CPU_ID, diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c index 4922139..ac1a223 100644 --- a/drivers/pcmcia/bfin_cf_pcmcia.c +++ b/drivers/pcmcia/bfin_cf_pcmcia.c @@ -310,18 +310,7 @@ static struct platform_driver bfin_cf_driver = { .remove = __devexit_p(bfin_cf_remove), }; -static int __init bfin_cf_init(void) -{ - return platform_driver_register(&bfin_cf_driver); -} - -static void __exit bfin_cf_exit(void) -{ - platform_driver_unregister(&bfin_cf_driver); -} - -module_init(bfin_cf_init); -module_exit(bfin_cf_exit); +module_platform_driver(bfin_cf_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver"); diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index d9ea192..673c14e 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -29,7 +29,6 @@ #include <linux/device.h> #include <linux/kthread.h> #include <linux/freezer.h> -#include <asm/system.h> #include <asm/irq.h> #include <pcmcia/ss.h> diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index 5b7c227..a484b1f 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -172,12 +172,12 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) if ((sock->board_type == BOARD_TYPE_DB1200) || (sock->board_type == BOARD_TYPE_DB1300)) { ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, - IRQF_DISABLED, "pcmcia_insert", sock); + 0, "pcmcia_insert", sock); if (ret) goto out1; ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq, - IRQF_DISABLED, "pcmcia_eject", sock); + 0, "pcmcia_eject", sock); if (ret) { free_irq(sock->insert_irq, sock); goto out1; @@ -580,18 +580,7 @@ static struct platform_driver db1x_pcmcia_socket_driver = { .remove = __devexit_p(db1x_pcmcia_socket_remove), }; -int __init db1x_pcmcia_socket_load(void) -{ - return platform_driver_register(&db1x_pcmcia_socket_driver); -} - -void __exit db1x_pcmcia_socket_unload(void) -{ - platform_driver_unregister(&db1x_pcmcia_socket_driver); -} - -module_init(db1x_pcmcia_socket_load); -module_exit(db1x_pcmcia_socket_unload); +module_platform_driver(db1x_pcmcia_socket_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards"); diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c index 06ad3e5..7647d23 100644 --- a/drivers/pcmcia/electra_cf.c +++ b/drivers/pcmcia/electra_cf.c @@ -365,17 +365,7 @@ static struct platform_driver electra_cf_driver = { .remove = electra_cf_remove, }; -static int __init electra_cf_init(void) -{ - return platform_driver_register(&electra_cf_driver); -} -module_init(electra_cf_init); - -static void __exit electra_cf_exit(void) -{ - platform_driver_unregister(&electra_cf_driver); -} -module_exit(electra_cf_exit); +module_platform_driver(electra_cf_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>"); diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 3e447d0..4e8831b 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -17,7 +17,6 @@ #include <pcmcia/ss.h> -#include <asm/system.h> #include <asm/io.h> #include "i82092aa.h" @@ -26,14 +25,9 @@ MODULE_LICENSE("GPL"); /* PCI core routines */ -static struct pci_device_id i82092aa_pci_ids[] = { - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82092AA_0, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - }, - {} +static DEFINE_PCI_DEVICE_TABLE(i82092aa_pci_ids) = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82092AA_0) }, + { } }; MODULE_DEVICE_TABLE(pci, i82092aa_pci_ids); diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 72a033a..e6f3d17d 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -48,7 +48,6 @@ #include <linux/bitops.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/ss.h> diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 2adb010..a26f38c 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -24,7 +24,6 @@ #include <linux/bitops.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/ss.h> diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 1511ff7..2965141 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -24,7 +24,6 @@ #include <linux/bitops.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/addrspace.h> #include <pcmcia/ss.h> diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index 271a590..a3a851e 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -52,7 +52,6 @@ #include <linux/of_platform.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> @@ -1304,15 +1303,4 @@ static struct platform_driver m8xx_pcmcia_driver = { .remove = m8xx_remove, }; -static int __init m8xx_init(void) -{ - return platform_driver_register(&m8xx_pcmcia_driver); -} - -static void __exit m8xx_exit(void) -{ - platform_driver_unregister(&m8xx_pcmcia_driver); -} - -module_init(m8xx_init); -module_exit(m8xx_exit); +module_platform_driver(m8xx_pcmcia_driver); diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index 96c72e9..253e386 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -19,7 +19,6 @@ #include <pcmcia/ss.h> -#include <asm/system.h> #include "pd6729.h" #include "i82365.h" @@ -763,13 +762,8 @@ static void __devexit pd6729_pci_remove(struct pci_dev *dev) kfree(socket); } -static struct pci_device_id pd6729_pci_ids[] = { - { - .vendor = PCI_VENDOR_ID_CIRRUS, - .device = PCI_DEVICE_ID_CIRRUS_6729, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - }, +static DEFINE_PCI_DEVICE_TABLE(pd6729_pci_ids) = { + { PCI_DEVICE(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729) }, { } }; MODULE_DEVICE_TABLE(pci, pd6729_pci_ids); diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 66a5422..490bb82 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -29,7 +29,6 @@ #include <mach/smemc.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <mach/pxa2xx-regs.h> #include <asm/mach-types.h> diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c index adfae49..cb0c37e 100644 --- a/drivers/pcmcia/pxa2xx_viper.c +++ b/drivers/pcmcia/pxa2xx_viper.c @@ -177,18 +177,7 @@ static struct platform_driver viper_pcmcia_driver = { .id_table = viper_pcmcia_id_table, }; -static int __init viper_pcmcia_init(void) -{ - return platform_driver_register(&viper_pcmcia_driver); -} - -static void __exit viper_pcmcia_exit(void) -{ - return platform_driver_unregister(&viper_pcmcia_driver); -} - -module_init(viper_pcmcia_init); -module_exit(viper_pcmcia_exit); +module_platform_driver(viper_pcmcia_driver); MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table); MODULE_LICENSE("GPL"); diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index ef5848f..70f728c 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -22,6 +22,40 @@ #include "sa1111_generic.h" +/* + * These are offsets from the above base. + */ +#define PCCR 0x0000 +#define PCSSR 0x0004 +#define PCSR 0x0008 + +#define PCSR_S0_READY (1<<0) +#define PCSR_S1_READY (1<<1) +#define PCSR_S0_DETECT (1<<2) +#define PCSR_S1_DETECT (1<<3) +#define PCSR_S0_VS1 (1<<4) +#define PCSR_S0_VS2 (1<<5) +#define PCSR_S1_VS1 (1<<6) +#define PCSR_S1_VS2 (1<<7) +#define PCSR_S0_WP (1<<8) +#define PCSR_S1_WP (1<<9) +#define PCSR_S0_BVD1 (1<<10) +#define PCSR_S0_BVD2 (1<<11) +#define PCSR_S1_BVD1 (1<<12) +#define PCSR_S1_BVD2 (1<<13) + +#define PCCR_S0_RST (1<<0) +#define PCCR_S1_RST (1<<1) +#define PCCR_S0_FLT (1<<2) +#define PCCR_S1_FLT (1<<3) +#define PCCR_S0_PWAITEN (1<<4) +#define PCCR_S1_PWAITEN (1<<5) +#define PCCR_S0_PSE (1<<6) +#define PCCR_S1_PSE (1<<7) + +#define PCSSR_S0_SLEEP (1<<0) +#define PCSSR_S1_SLEEP (1<<1) + #define IDX_IRQ_S0_READY_NINT (0) #define IDX_IRQ_S0_CD_VALID (1) #define IDX_IRQ_S0_BVD1_STSCHG (2) @@ -32,7 +66,7 @@ void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state) { struct sa1111_pcmcia_socket *s = to_skt(skt); - unsigned long status = sa1111_readl(s->dev->mapbase + SA1111_PCSR); + unsigned long status = sa1111_readl(s->dev->mapbase + PCSR); switch (skt->nr) { case 0: @@ -88,10 +122,10 @@ int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT; local_irq_save(flags); - val = sa1111_readl(s->dev->mapbase + SA1111_PCCR); + val = sa1111_readl(s->dev->mapbase + PCCR); val &= ~pccr_skt_mask; val |= pccr_set_mask & pccr_skt_mask; - sa1111_writel(val, s->dev->mapbase + SA1111_PCCR); + sa1111_writel(val, s->dev->mapbase + PCCR); local_irq_restore(flags); return 0; @@ -141,20 +175,26 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops, static int pcmcia_probe(struct sa1111_dev *dev) { void __iomem *base; + int ret; + + ret = sa1111_enable_device(dev); + if (ret) + return ret; dev_set_drvdata(&dev->dev, NULL); - if (!request_mem_region(dev->res.start, 512, - SA1111_DRIVER_NAME(dev))) + if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) { + sa1111_disable_device(dev); return -EBUSY; + } base = dev->mapbase; /* * Initialise the suspend state. */ - sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + SA1111_PCSSR); - sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + SA1111_PCCR); + sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR); + sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR); #ifdef CONFIG_SA1100_BADGE4 pcmcia_badge4_init(&dev->dev); @@ -184,6 +224,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev) } release_mem_region(dev->res.start, 512); + sa1111_disable_device(dev); return 0; } diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c index 50f297d..1d78739 100644 --- a/drivers/pcmcia/sa1111_neponset.c +++ b/drivers/pcmcia/sa1111_neponset.c @@ -94,12 +94,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta ret = sa1111_pcmcia_configure_socket(skt, state); if (ret == 0) { - unsigned long flags; - - local_irq_save(flags); - NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set; - - local_irq_restore(flags); + neponset_ncr_frob(ncr_mask, ncr_set); sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); } diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index a3ee89a..6eecd7c 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c @@ -41,7 +41,6 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/system.h> #include "soc_common.h" #include "sa11xx_base.h" diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index e0433f5..a2bc6ee 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -46,7 +46,6 @@ #include <linux/timer.h> #include <mach/hardware.h> -#include <asm/system.h> #include "soc_common.h" diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index 71aeed9..d688151 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -23,7 +23,6 @@ #include <linux/pm.h> #include <linux/device.h> #include <linux/mutex.h> -#include <asm/system.h> #include <asm/irq.h> #include <pcmcia/ss.h> diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 310160b..cbe15fc 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -47,7 +47,6 @@ #include <linux/bitops.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/ss.h> #include "tcic.h" diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c index c6d36b3..cd0a315 100644 --- a/drivers/pcmcia/vrc4173_cardu.c +++ b/drivers/pcmcia/vrc4173_cardu.c @@ -563,11 +563,8 @@ static int __devinit vrc4173_cardu_setup(char *options) __setup("vrc4173_cardu=", vrc4173_cardu_setup); -static struct pci_device_id vrc4173_cardu_id_table[] __devinitdata = { - { .vendor = PCI_VENDOR_ID_NEC, - .device = PCI_DEVICE_ID_NEC_NAPCCARD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, }, +static DEFINE_PCI_DEVICE_TABLE(vrc4173_cardu_id_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NAPCCARD) }, {0, } }; diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c index 379f421..fd5fbd1 100644 --- a/drivers/pcmcia/xxs1500_ss.c +++ b/drivers/pcmcia/xxs1500_ss.c @@ -21,7 +21,6 @@ #include <pcmcia/cistpl.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/mach-au1x00/au1000.h> #define MEM_MAP_SIZE 0x400000 @@ -321,18 +320,7 @@ static struct platform_driver xxs1500_pcmcia_socket_driver = { .remove = __devexit_p(xxs1500_pcmcia_remove), }; -int __init xxs1500_pcmcia_socket_load(void) -{ - return platform_driver_register(&xxs1500_pcmcia_socket_driver); -} - -void __exit xxs1500_pcmcia_socket_unload(void) -{ - platform_driver_unregister(&xxs1500_pcmcia_socket_driver); -} - -module_init(xxs1500_pcmcia_socket_load); -module_exit(xxs1500_pcmcia_socket_unload); +module_platform_driver(xxs1500_pcmcia_socket_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems"); diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 849c0c1..d07f9ac 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -1352,7 +1352,7 @@ static const struct dev_pm_ops yenta_pm_ops = { .driver_data = CARDBUS_TYPE_##type, \ } -static struct pci_device_id yenta_table[] = { +static DEFINE_PCI_DEVICE_TABLE(yenta_table) = { CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1031, TI), /* diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 2dc02c9..2a262f5 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -26,6 +26,10 @@ config ACER_WMI depends on RFKILL || RFKILL = n depends on ACPI_WMI select INPUT_SPARSEKMAP + # Acer WMI depends on ACPI_VIDEO when ACPI is enabled + # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select ACPI_VIDEO if ACPI ---help--- This is a driver for newer Acer (and Wistron) laptops. It adds wireless radio and bluetooth control, and on some laptops, @@ -54,7 +58,6 @@ config ACERHDF config ASUS_LAPTOP tristate "Asus Laptop Extras" depends on ACPI - depends on !ACPI_ASUS select LEDS_CLASS select NEW_LEDS select BACKLIGHT_CLASS_DEVICE @@ -460,10 +463,9 @@ config INTEL_MENLOW If unsure, say N. config EEEPC_LAPTOP - tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" + tristate "Eee PC Hotkey Driver" depends on ACPI depends on INPUT - depends on EXPERIMENTAL depends on RFKILL || RFKILL = n depends on HOTPLUG_PCI select BACKLIGHT_CLASS_DEVICE @@ -482,11 +484,10 @@ config EEEPC_LAPTOP doesn't work on your Eee PC, try eeepc-wmi instead. config ASUS_WMI - tristate "ASUS WMI Driver (EXPERIMENTAL)" + tristate "ASUS WMI Driver" depends on ACPI_WMI depends on INPUT depends on HWMON - depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n depends on HOTPLUG_PCI @@ -501,7 +502,7 @@ config ASUS_WMI be called asus-wmi. config ASUS_NB_WMI - tristate "Asus Notebook WMI Driver (EXPERIMENTAL)" + tristate "Asus Notebook WMI Driver" depends on ASUS_WMI ---help--- This is a driver for newer Asus notebooks. It adds extra features @@ -514,7 +515,7 @@ config ASUS_NB_WMI here. config EEEPC_WMI - tristate "Eee PC WMI Driver (EXPERIMENTAL)" + tristate "Eee PC WMI Driver" depends on ASUS_WMI ---help--- This is a driver for newer Eee PC laptops. It adds extra features @@ -559,38 +560,6 @@ config MSI_WMI To compile this driver as a module, choose M here: the module will be called msi-wmi. -config ACPI_ASUS - tristate "ASUS/Medion Laptop Extras (DEPRECATED)" - depends on ACPI - select BACKLIGHT_CLASS_DEVICE - ---help--- - This driver provides support for extra features of ACPI-compatible - ASUS laptops. As some of Medion laptops are made by ASUS, it may also - support some Medion laptops (such as 9675 for example). It makes all - the extra buttons generate standard ACPI events that go through - /proc/acpi/events, and (on some models) adds support for changing the - display brightness and output, switching the LCD backlight on and off, - and most importantly, allows you to blink those fancy LEDs intended - for reporting mail and wireless status. - - Note: display switching code is currently considered EXPERIMENTAL, - toying with these values may even lock your machine. - - All settings are changed via /proc/acpi/asus directory entries. Owner - and group for these entries can be set with asus_uid and asus_gid - parameters. - - More information and a userspace daemon for handling the extra buttons - at <http://acpi4asus.sf.net>. - - If you have an ACPI-compatible ASUS laptop, say Y or M here. This - driver is still under development, so if your laptop is unsupported or - something works not quite as expected, please use the mailing list - available on the above page (acpi4asus-user@lists.sourceforge.net). - - NOTE: This driver is deprecated and will probably be removed soon, - use asus-laptop instead. - config TOPSTAR_LAPTOP tristate "Topstar Laptop Extras" depends on ACPI @@ -604,6 +573,7 @@ config TOPSTAR_LAPTOP config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on ACPI + depends on ACPI_WMI select LEDS_CLASS select NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE @@ -746,13 +716,18 @@ config XO15_EBOOK config SAMSUNG_LAPTOP tristate "Samsung Laptop driver" - depends on RFKILL && BACKLIGHT_CLASS_DEVICE && X86 + depends on X86 + depends on RFKILL || RFKILL = n + depends on BACKLIGHT_CLASS_DEVICE + select LEDS_CLASS + select NEW_LEDS ---help--- This module implements a driver for a wide range of different Samsung laptops. It offers control over the different - function keys, wireless LED, LCD backlight level, and - sometimes provides a "performance_control" sysfs file to allow - the performance level of the laptop to be changed. + function keys, wireless LED, LCD backlight level. + + It may also provide some sysfs files described in + <file:Documentation/ABI/testing/sysfs-platform-samsung-laptop> To compile this driver as a module, choose M here: the module will be called samsung-laptop. @@ -781,4 +756,14 @@ config SAMSUNG_Q10 This driver provides support for backlight control on Samsung Q10 and related laptops, including Dell Latitude X200. +config APPLE_GMUX + tristate "Apple Gmux Driver" + depends on PNP + select BACKLIGHT_CLASS_DEVICE + ---help--- + This driver provides support for the gmux device found on many + Apple laptops, which controls the display mux for the hybrid + graphics as well as the backlight. Currently only backlight + control is supported by the driver. + endif # X86_PLATFORM_DEVICES diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index bb94765..bf7e4f9 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -29,9 +29,12 @@ obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o obj-$(CONFIG_ACPI_WMI) += wmi.o obj-$(CONFIG_MSI_WMI) += msi-wmi.o -obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o + +# toshiba_acpi must link after wmi to ensure that wmi devices are found +# before toshiba_acpi initializes obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o + obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o @@ -46,3 +49,4 @@ obj-$(CONFIG_MXM_WMI) += mxm-wmi.o obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o +obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 1e5290b..c1a3fd8 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -43,6 +43,7 @@ #include <linux/input/sparse-keymap.h> #include <acpi/acpi_drivers.h> +#include <acpi/video.h> MODULE_AUTHOR("Carlos Corbacho"); MODULE_DESCRIPTION("Acer Laptop WMI Extras Driver"); @@ -105,13 +106,19 @@ static const struct key_entry acer_wmi_keymap[] = { {KE_KEY, 0x22, {KEY_PROG2} }, /* Arcade */ {KE_KEY, 0x23, {KEY_PROG3} }, /* P_Key */ {KE_KEY, 0x24, {KEY_PROG4} }, /* Social networking_Key */ + {KE_KEY, 0x29, {KEY_PROG3} }, /* P_Key for TM8372 */ {KE_IGNORE, 0x41, {KEY_MUTE} }, {KE_IGNORE, 0x42, {KEY_PREVIOUSSONG} }, + {KE_IGNORE, 0x4d, {KEY_PREVIOUSSONG} }, {KE_IGNORE, 0x43, {KEY_NEXTSONG} }, + {KE_IGNORE, 0x4e, {KEY_NEXTSONG} }, {KE_IGNORE, 0x44, {KEY_PLAYPAUSE} }, + {KE_IGNORE, 0x4f, {KEY_PLAYPAUSE} }, {KE_IGNORE, 0x45, {KEY_STOP} }, + {KE_IGNORE, 0x50, {KEY_STOP} }, {KE_IGNORE, 0x48, {KEY_VOLUMEUP} }, {KE_IGNORE, 0x49, {KEY_VOLUMEDOWN} }, + {KE_IGNORE, 0x4a, {KEY_VOLUMEDOWN} }, {KE_IGNORE, 0x61, {KEY_SWITCHVIDEOMODE} }, {KE_IGNORE, 0x62, {KEY_BRIGHTNESSUP} }, {KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} }, @@ -153,7 +160,14 @@ struct lm_return_value { u16 reserved; } __attribute__((packed)); -struct wmid3_gds_input_param { /* Get Device Status input parameter */ +struct wmid3_gds_set_input_param { /* Set Device Status input parameter */ + u8 function_num; /* Function Number */ + u8 hotkey_number; /* Hotkey Number */ + u16 devices; /* Set Device */ + u8 volume_value; /* Volume Value */ +} __attribute__((packed)); + +struct wmid3_gds_get_input_param { /* Get Device Status input parameter */ u8 function_num; /* Function Number */ u8 hotkey_number; /* Hotkey Number */ u16 devices; /* Get Device */ @@ -171,6 +185,11 @@ struct hotkey_function_type_aa { u8 length; u16 handle; u16 commun_func_bitmap; + u16 application_func_bitmap; + u16 media_func_bitmap; + u16 display_func_bitmap; + u16 others_func_bitmap; + u8 commun_fn_key_number; } __attribute__((packed)); /* @@ -207,6 +226,7 @@ static int force_series; static bool ec_raw_mode; static bool has_type_aa; static u16 commun_func_bitmap; +static u8 commun_fn_key_number; module_param(mailled, int, 0444); module_param(brightness, int, 0444); @@ -468,6 +488,15 @@ static struct dmi_system_id acer_quirks[] = { }, { .callback = dmi_matched, + .ident = "Lenovo Ideapad S205 (Brazos)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "Brazos"), + }, + .driver_data = &quirk_lenovo_ideapad_s205, + }, + { + .callback = dmi_matched, .ident = "Lenovo 3000 N200", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), @@ -478,6 +507,25 @@ static struct dmi_system_id acer_quirks[] = { {} }; +static int video_set_backlight_video_vendor(const struct dmi_system_id *d) +{ + interface->capability &= ~ACER_CAP_BRIGHTNESS; + pr_info("Brightness must be controlled by generic video driver\n"); + return 0; +} + +static const struct dmi_system_id video_vendor_dmi_table[] = { + { + .callback = video_set_backlight_video_vendor, + .ident = "Acer TravelMate 4750", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4750"), + }, + }, + {} +}; + /* Find which quirks are needed for a particular vendor/ model pair */ static void find_quirks(void) { @@ -536,8 +584,7 @@ struct acpi_buffer *result) return status; } -static acpi_status AMW0_get_u32(u32 *value, u32 cap, -struct wmi_interface *iface) +static acpi_status AMW0_get_u32(u32 *value, u32 cap) { int err; u8 result; @@ -607,7 +654,7 @@ struct wmi_interface *iface) return AE_OK; } -static acpi_status AMW0_set_u32(u32 value, u32 cap, struct wmi_interface *iface) +static acpi_status AMW0_set_u32(u32 value, u32 cap) { struct wmab_args args; @@ -692,6 +739,7 @@ static const struct acpi_device_id norfkill_ids[] = { { "VPC2004", 0}, { "IBM0068", 0}, { "LEN0068", 0}, + { "SNY5001", 0}, /* sony-laptop in charge */ { "", 0}, }; @@ -827,8 +875,7 @@ WMI_execute_u32(u32 method_id, u32 in, u32 *out) return status; } -static acpi_status WMID_get_u32(u32 *value, u32 cap, -struct wmi_interface *iface) +static acpi_status WMID_get_u32(u32 *value, u32 cap) { acpi_status status; u8 tmp; @@ -864,7 +911,7 @@ struct wmi_interface *iface) return status; } -static acpi_status WMID_set_u32(u32 value, u32 cap, struct wmi_interface *iface) +static acpi_status WMID_set_u32(u32 value, u32 cap) { u32 method_id = 0; char param; @@ -912,13 +959,13 @@ static acpi_status wmid3_get_device_status(u32 *value, u16 device) struct wmid3_gds_return_value return_value; acpi_status status; union acpi_object *obj; - struct wmid3_gds_input_param params = { + struct wmid3_gds_get_input_param params = { .function_num = 0x1, - .hotkey_number = 0x01, + .hotkey_number = commun_fn_key_number, .devices = device, }; struct acpi_buffer input = { - sizeof(struct wmid3_gds_input_param), + sizeof(struct wmid3_gds_get_input_param), ¶ms }; struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -981,19 +1028,28 @@ static acpi_status wmid3_set_device_status(u32 value, u16 device) acpi_status status; union acpi_object *obj; u16 devices; - struct wmid3_gds_input_param params = { + struct wmid3_gds_get_input_param get_params = { .function_num = 0x1, - .hotkey_number = 0x01, + .hotkey_number = commun_fn_key_number, .devices = commun_func_bitmap, }; - struct acpi_buffer input = { - sizeof(struct wmid3_gds_input_param), - ¶ms + struct acpi_buffer get_input = { + sizeof(struct wmid3_gds_get_input_param), + &get_params + }; + struct wmid3_gds_set_input_param set_params = { + .function_num = 0x2, + .hotkey_number = commun_fn_key_number, + .devices = commun_func_bitmap, + }; + struct acpi_buffer set_input = { + sizeof(struct wmid3_gds_set_input_param), + &set_params }; struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; struct acpi_buffer output2 = { ACPI_ALLOCATE_BUFFER, NULL }; - status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output); + status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &get_input, &output); if (ACPI_FAILURE(status)) return status; @@ -1006,7 +1062,7 @@ static acpi_status wmid3_set_device_status(u32 value, u16 device) return AE_ERROR; } if (obj->buffer.length != 8) { - pr_warning("Unknown buffer length %d\n", obj->buffer.length); + pr_warn("Unknown buffer length %d\n", obj->buffer.length); kfree(obj); return AE_ERROR; } @@ -1015,18 +1071,16 @@ static acpi_status wmid3_set_device_status(u32 value, u16 device) kfree(obj); if (return_value.error_code || return_value.ec_return_value) { - pr_warning("Get Current Device Status failed: " - "0x%x - 0x%x\n", return_value.error_code, + pr_warn("Get Current Device Status failed: 0x%x - 0x%x\n", + return_value.error_code, return_value.ec_return_value); return status; } devices = return_value.devices; - params.function_num = 0x2; - params.hotkey_number = 0x01; - params.devices = (value) ? (devices | device) : (devices & ~device); + set_params.devices = (value) ? (devices | device) : (devices & ~device); - status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &input, &output2); + status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &set_input, &output2); if (ACPI_FAILURE(status)) return status; @@ -1039,7 +1093,7 @@ static acpi_status wmid3_set_device_status(u32 value, u16 device) return AE_ERROR; } if (obj->buffer.length != 4) { - pr_warning("Unknown buffer length %d\n", obj->buffer.length); + pr_warn("Unknown buffer length %d\n", obj->buffer.length); kfree(obj); return AE_ERROR; } @@ -1048,8 +1102,8 @@ static acpi_status wmid3_set_device_status(u32 value, u16 device) kfree(obj); if (return_value.error_code || return_value.ec_return_value) - pr_warning("Set Device Status failed: " - "0x%x - 0x%x\n", return_value.error_code, + pr_warn("Set Device Status failed: 0x%x - 0x%x\n", + return_value.error_code, return_value.ec_return_value); return status; @@ -1096,6 +1150,8 @@ static void type_aa_dmi_decode(const struct dmi_header *header, void *dummy) interface->capability |= ACER_CAP_THREEG; if (type_aa->commun_func_bitmap & ACER_WMID3_GDS_BLUETOOTH) interface->capability |= ACER_CAP_BLUETOOTH; + + commun_fn_key_number = type_aa->commun_fn_key_number; } static acpi_status WMID_set_capabilities(void) @@ -1154,15 +1210,15 @@ static acpi_status get_u32(u32 *value, u32 cap) switch (interface->type) { case ACER_AMW0: - status = AMW0_get_u32(value, cap, interface); + status = AMW0_get_u32(value, cap); break; case ACER_AMW0_V2: if (cap == ACER_CAP_MAILLED) { - status = AMW0_get_u32(value, cap, interface); + status = AMW0_get_u32(value, cap); break; } case ACER_WMID: - status = WMID_get_u32(value, cap, interface); + status = WMID_get_u32(value, cap); break; case ACER_WMID_v2: if (cap & (ACER_CAP_WIRELESS | @@ -1170,7 +1226,7 @@ static acpi_status get_u32(u32 *value, u32 cap) ACER_CAP_THREEG)) status = wmid_v2_get_u32(value, cap); else if (wmi_has_guid(WMID_GUID2)) - status = WMID_get_u32(value, cap, interface); + status = WMID_get_u32(value, cap); break; } @@ -1184,10 +1240,10 @@ static acpi_status set_u32(u32 value, u32 cap) if (interface->capability & cap) { switch (interface->type) { case ACER_AMW0: - return AMW0_set_u32(value, cap, interface); + return AMW0_set_u32(value, cap); case ACER_AMW0_V2: if (cap == ACER_CAP_MAILLED) - return AMW0_set_u32(value, cap, interface); + return AMW0_set_u32(value, cap); /* * On some models, some WMID methods don't toggle @@ -1197,21 +1253,21 @@ static acpi_status set_u32(u32 value, u32 cap) */ if (cap == ACER_CAP_WIRELESS || cap == ACER_CAP_BLUETOOTH) { - status = WMID_set_u32(value, cap, interface); + status = WMID_set_u32(value, cap); if (ACPI_FAILURE(status)) return status; - return AMW0_set_u32(value, cap, interface); + return AMW0_set_u32(value, cap); } case ACER_WMID: - return WMID_set_u32(value, cap, interface); + return WMID_set_u32(value, cap); case ACER_WMID_v2: if (cap & (ACER_CAP_WIRELESS | ACER_CAP_BLUETOOTH | ACER_CAP_THREEG)) return wmid_v2_set_u32(value, cap); else if (wmi_has_guid(WMID_GUID2)) - return WMID_set_u32(value, cap, interface); + return WMID_set_u32(value, cap); default: return AE_BAD_PARAMETER; } @@ -1488,8 +1544,8 @@ static ssize_t show_bool_threeg(struct device *dev, u32 result; \ acpi_status status; - pr_info("This threeg sysfs will be removed in 2012" - " - used by: %s\n", current->comm); + pr_info("This threeg sysfs will be removed in 2012 - used by: %s\n", + current->comm); status = get_u32(&result, ACER_CAP_THREEG); if (ACPI_SUCCESS(status)) return sprintf(buf, "%u\n", result); @@ -1501,8 +1557,8 @@ static ssize_t set_bool_threeg(struct device *dev, { u32 tmp = simple_strtoul(buf, NULL, 10); acpi_status status = set_u32(tmp, ACER_CAP_THREEG); - pr_info("This threeg sysfs will be removed in 2012" - " - used by: %s\n", current->comm); + pr_info("This threeg sysfs will be removed in 2012 - used by: %s\n", + current->comm); if (ACPI_FAILURE(status)) return -EINVAL; return count; @@ -1513,8 +1569,8 @@ static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg, static ssize_t show_interface(struct device *dev, struct device_attribute *attr, char *buf) { - pr_info("This interface sysfs will be removed in 2012" - " - used by: %s\n", current->comm); + pr_info("This interface sysfs will be removed in 2012 - used by: %s\n", + current->comm); switch (interface->type) { case ACER_AMW0: return sprintf(buf, "AMW0\n"); @@ -1981,9 +2037,13 @@ static int __init acer_wmi_init(void) set_quirks(); if (acpi_video_backlight_support()) { - interface->capability &= ~ACER_CAP_BRIGHTNESS; - pr_info("Brightness must be controlled by " - "generic video driver\n"); + if (dmi_check_system(video_vendor_dmi_table)) { + acpi_video_unregister(); + } else { + interface->capability &= ~ACER_CAP_BRIGHTNESS; + pr_info("Brightness must be controlled by " + "acpi video driver\n"); + } } if (wmi_has_guid(WMID_GUID3)) { @@ -2008,7 +2068,7 @@ static int __init acer_wmi_init(void) err = platform_driver_register(&acer_platform_driver); if (err) { - pr_err("Unable to register platform driver.\n"); + pr_err("Unable to register platform driver\n"); goto error_platform_register; } diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 760c6d7..bc8384c 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -244,12 +244,11 @@ static void acerhdf_change_fanstate(int state) unsigned char cmd; if (verbose) - pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ? - "OFF" : "ON"); + pr_notice("fan %s\n", state == ACERHDF_FAN_OFF ? "OFF" : "ON"); if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) { pr_err("invalid fan state %d requested, setting to auto!\n", - state); + state); state = ACERHDF_FAN_AUTO; } @@ -264,19 +263,18 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal) { if (fanon > ACERHDF_MAX_FANON) { pr_err("fanon temperature too high, set to %d\n", - ACERHDF_MAX_FANON); + ACERHDF_MAX_FANON); fanon = ACERHDF_MAX_FANON; } if (kernelmode && prev_interval != interval) { if (interval > ACERHDF_MAX_INTERVAL) { pr_err("interval too high, set to %d\n", - ACERHDF_MAX_INTERVAL); + ACERHDF_MAX_INTERVAL); interval = ACERHDF_MAX_INTERVAL; } if (verbose) - pr_notice("interval changed to: %d\n", - interval); + pr_notice("interval changed to: %d\n", interval); thermal->polling_delay = interval*1000; prev_interval = interval; } @@ -587,8 +585,8 @@ static int acerhdf_check_hardware(void) } if (!bios_cfg) { - pr_err("unknown (unsupported) BIOS version %s/%s/%s, " - "please report, aborting!\n", vendor, product, version); + pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n", + vendor, product, version); return -EINVAL; } @@ -598,8 +596,7 @@ static int acerhdf_check_hardware(void) */ if (!kernelmode) { pr_notice("Fan control off, to enable do:\n"); - pr_notice("echo -n \"enabled\" > " - "/sys/class/thermal/thermal_zone0/mode\n"); + pr_notice("echo -n \"enabled\" > /sys/class/thermal/thermal_zone0/mode\n"); } return 0; diff --git a/drivers/platform/x86/amilo-rfkill.c b/drivers/platform/x86/amilo-rfkill.c index 19170bb..a514bf6 100644 --- a/drivers/platform/x86/amilo-rfkill.c +++ b/drivers/platform/x86/amilo-rfkill.c @@ -97,9 +97,12 @@ static struct rfkill *amilo_rfkill_dev; static int __devinit amilo_rfkill_probe(struct platform_device *device) { + int rc; const struct dmi_system_id *system_id = dmi_first_match(amilo_rfkill_id_table); - int rc; + + if (!system_id) + return -ENXIO; amilo_rfkill_dev = rfkill_alloc(KBUILD_MODNAME, &device->dev, RFKILL_TYPE_WLAN, diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c new file mode 100644 index 0000000..8a582bd --- /dev/null +++ b/drivers/platform/x86/apple-gmux.c @@ -0,0 +1,244 @@ +/* + * Gmux driver for Apple laptops + * + * Copyright (C) Canonical Ltd. <seth.forshee@canonical.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/backlight.h> +#include <linux/acpi.h> +#include <linux/pnp.h> +#include <linux/apple_bl.h> +#include <linux/slab.h> +#include <acpi/video.h> +#include <asm/io.h> + +struct apple_gmux_data { + unsigned long iostart; + unsigned long iolen; + + struct backlight_device *bdev; +}; + +/* + * gmux port offsets. Many of these are not yet used, but may be in the + * future, and it's useful to have them documented here anyhow. + */ +#define GMUX_PORT_VERSION_MAJOR 0x04 +#define GMUX_PORT_VERSION_MINOR 0x05 +#define GMUX_PORT_VERSION_RELEASE 0x06 +#define GMUX_PORT_SWITCH_DISPLAY 0x10 +#define GMUX_PORT_SWITCH_GET_DISPLAY 0x11 +#define GMUX_PORT_INTERRUPT_ENABLE 0x14 +#define GMUX_PORT_INTERRUPT_STATUS 0x16 +#define GMUX_PORT_SWITCH_DDC 0x28 +#define GMUX_PORT_SWITCH_EXTERNAL 0x40 +#define GMUX_PORT_SWITCH_GET_EXTERNAL 0x41 +#define GMUX_PORT_DISCRETE_POWER 0x50 +#define GMUX_PORT_MAX_BRIGHTNESS 0x70 +#define GMUX_PORT_BRIGHTNESS 0x74 + +#define GMUX_MIN_IO_LEN (GMUX_PORT_BRIGHTNESS + 4) + +#define GMUX_INTERRUPT_ENABLE 0xff +#define GMUX_INTERRUPT_DISABLE 0x00 + +#define GMUX_INTERRUPT_STATUS_ACTIVE 0 +#define GMUX_INTERRUPT_STATUS_DISPLAY (1 << 0) +#define GMUX_INTERRUPT_STATUS_POWER (1 << 2) +#define GMUX_INTERRUPT_STATUS_HOTPLUG (1 << 3) + +#define GMUX_BRIGHTNESS_MASK 0x00ffffff +#define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK + +static inline u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +{ + return inb(gmux_data->iostart + port); +} + +static inline void gmux_write8(struct apple_gmux_data *gmux_data, int port, + u8 val) +{ + outb(val, gmux_data->iostart + port); +} + +static inline u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +{ + return inl(gmux_data->iostart + port); +} + +static int gmux_get_brightness(struct backlight_device *bd) +{ + struct apple_gmux_data *gmux_data = bl_get_data(bd); + return gmux_read32(gmux_data, GMUX_PORT_BRIGHTNESS) & + GMUX_BRIGHTNESS_MASK; +} + +static int gmux_update_status(struct backlight_device *bd) +{ + struct apple_gmux_data *gmux_data = bl_get_data(bd); + u32 brightness = bd->props.brightness; + + /* + * Older gmux versions require writing out lower bytes first then + * setting the upper byte to 0 to flush the values. Newer versions + * accept a single u32 write, but the old method also works, so we + * just use the old method for all gmux versions. + */ + gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); + gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 1, brightness >> 8); + gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 2, brightness >> 16); + gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 3, 0); + + return 0; +} + +static const struct backlight_ops gmux_bl_ops = { + .get_brightness = gmux_get_brightness, + .update_status = gmux_update_status, +}; + +static int __devinit gmux_probe(struct pnp_dev *pnp, + const struct pnp_device_id *id) +{ + struct apple_gmux_data *gmux_data; + struct resource *res; + struct backlight_properties props; + struct backlight_device *bdev; + u8 ver_major, ver_minor, ver_release; + int ret = -ENXIO; + + gmux_data = kzalloc(sizeof(*gmux_data), GFP_KERNEL); + if (!gmux_data) + return -ENOMEM; + pnp_set_drvdata(pnp, gmux_data); + + res = pnp_get_resource(pnp, IORESOURCE_IO, 0); + if (!res) { + pr_err("Failed to find gmux I/O resource\n"); + goto err_free; + } + + gmux_data->iostart = res->start; + gmux_data->iolen = res->end - res->start; + + if (gmux_data->iolen < GMUX_MIN_IO_LEN) { + pr_err("gmux I/O region too small (%lu < %u)\n", + gmux_data->iolen, GMUX_MIN_IO_LEN); + goto err_free; + } + + if (!request_region(gmux_data->iostart, gmux_data->iolen, + "Apple gmux")) { + pr_err("gmux I/O already in use\n"); + goto err_free; + } + + /* + * On some machines the gmux is in ACPI even thought the machine + * doesn't really have a gmux. Check for invalid version information + * to detect this. + */ + ver_major = gmux_read8(gmux_data, GMUX_PORT_VERSION_MAJOR); + ver_minor = gmux_read8(gmux_data, GMUX_PORT_VERSION_MINOR); + ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE); + if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) { + pr_info("gmux device not present\n"); + ret = -ENODEV; + goto err_release; + } + + pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, + ver_release); + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS); + + /* + * Currently it's assumed that the maximum brightness is less than + * 2^24 for compatibility with old gmux versions. Cap the max + * brightness at this value, but print a warning if the hardware + * reports something higher so that it can be fixed. + */ + if (WARN_ON(props.max_brightness > GMUX_MAX_BRIGHTNESS)) + props.max_brightness = GMUX_MAX_BRIGHTNESS; + + bdev = backlight_device_register("gmux_backlight", &pnp->dev, + gmux_data, &gmux_bl_ops, &props); + if (IS_ERR(bdev)) { + ret = PTR_ERR(bdev); + goto err_release; + } + + gmux_data->bdev = bdev; + bdev->props.brightness = gmux_get_brightness(bdev); + backlight_update_status(bdev); + + /* + * The backlight situation on Macs is complicated. If the gmux is + * present it's the best choice, because it always works for + * backlight control and supports more levels than other options. + * Disable the other backlight choices. + */ + acpi_video_unregister(); + apple_bl_unregister(); + + return 0; + +err_release: + release_region(gmux_data->iostart, gmux_data->iolen); +err_free: + kfree(gmux_data); + return ret; +} + +static void __devexit gmux_remove(struct pnp_dev *pnp) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + + backlight_device_unregister(gmux_data->bdev); + release_region(gmux_data->iostart, gmux_data->iolen); + kfree(gmux_data); + + acpi_video_register(); + apple_bl_register(); +} + +static const struct pnp_device_id gmux_device_ids[] = { + {"APP000B", 0}, + {"", 0} +}; + +static struct pnp_driver gmux_pnp_driver = { + .name = "apple-gmux", + .probe = gmux_probe, + .remove = __devexit_p(gmux_remove), + .id_table = gmux_device_ids, +}; + +static int __init apple_gmux_init(void) +{ + return pnp_register_driver(&gmux_pnp_driver); +} + +static void __exit apple_gmux_exit(void) +{ + pnp_unregister_driver(&gmux_pnp_driver); +} + +module_init(apple_gmux_init); +module_exit(apple_gmux_exit); + +MODULE_AUTHOR("Seth Forshee <seth.forshee@canonical.com>"); +MODULE_DESCRIPTION("Apple Gmux Driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pnp, gmux_device_ids); diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index b7944f9..e38f91b 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -81,6 +81,19 @@ static uint wapf = 1; module_param(wapf, uint, 0444); MODULE_PARM_DESC(wapf, "WAPF value"); +static char *wled_type = "unknown"; +static char *bled_type = "unknown"; + +module_param(wled_type, charp, 0444); +MODULE_PARM_DESC(wlan_status, "Set the wled type on boot " + "(unknown, led or rfkill). " + "default is unknown"); + +module_param(bled_type, charp, 0444); +MODULE_PARM_DESC(bled_type, "Set the bled type on boot " + "(unknown, led or rfkill). " + "default is unknown"); + static int wlan_status = 1; static int bluetooth_status = 1; static int wimax_status = -1; @@ -137,6 +150,11 @@ MODULE_PARM_DESC(als_status, "Set the ALS status on boot " #define WM_RSTS 0x08 /* internal wimax */ #define WW_RSTS 0x20 /* internal wwan */ +/* WLED and BLED type */ +#define TYPE_UNKNOWN 0 +#define TYPE_LED 1 +#define TYPE_RFKILL 2 + /* LED */ #define METHOD_MLED "MLED" #define METHOD_TLED "TLED" @@ -218,8 +236,9 @@ struct asus_led { /* * Same thing for rfkill */ -struct asus_pega_rfkill { - int control_id; /* type of control. Maps to PEGA_* values */ +struct asus_rfkill { + /* type of control. Maps to PEGA_* values or *_RSTS */ + int control_id; struct rfkill *rfkill; struct asus_laptop *asus; }; @@ -240,6 +259,8 @@ struct asus_laptop { struct key_entry *keymap; struct input_polled_dev *pega_accel_poll; + struct asus_led wled; + struct asus_led bled; struct asus_led mled; struct asus_led tled; struct asus_led rled; @@ -248,6 +269,8 @@ struct asus_laptop { struct asus_led kled; struct workqueue_struct *led_workqueue; + int wled_type; + int bled_type; int wireless_status; bool have_rsts; bool is_pega_lucid; @@ -256,11 +279,11 @@ struct asus_laptop { int pega_acc_y; int pega_acc_z; - struct rfkill *gps_rfkill; - - struct asus_pega_rfkill wlanrfk; - struct asus_pega_rfkill btrfk; - struct asus_pega_rfkill wwanrfk; + struct asus_rfkill wlan; + struct asus_rfkill bluetooth; + struct asus_rfkill wwan; + struct asus_rfkill wimax; + struct asus_rfkill gps; acpi_handle handle; /* the handle of the hotk device */ u32 ledd_status; /* status of the LED display */ @@ -274,6 +297,7 @@ static const struct key_entry asus_keymap[] = { {KE_KEY, 0x02, { KEY_SCREENLOCK } }, {KE_KEY, 0x05, { KEY_WLAN } }, {KE_KEY, 0x08, { KEY_F13 } }, + {KE_KEY, 0x09, { KEY_PROG2 } }, /* Dock */ {KE_KEY, 0x17, { KEY_ZOOM } }, {KE_KEY, 0x1f, { KEY_BATTERY } }, /* End of Lenovo SL Specific keycodes */ @@ -299,6 +323,8 @@ static const struct key_entry asus_keymap[] = { {KE_KEY, 0x62, { KEY_SWITCHVIDEOMODE } }, {KE_KEY, 0x63, { KEY_SWITCHVIDEOMODE } }, {KE_KEY, 0x6B, { KEY_F13 } }, /* Lock Touchpad */ + {KE_KEY, 0x6C, { KEY_SLEEP } }, /* Suspend */ + {KE_KEY, 0x6D, { KEY_SLEEP } }, /* Hibernate */ {KE_KEY, 0x7E, { KEY_BLUETOOTH } }, {KE_KEY, 0x7D, { KEY_BLUETOOTH } }, {KE_KEY, 0x82, { KEY_CAMERA } }, @@ -601,6 +627,10 @@ static enum led_brightness asus_kled_cdev_get(struct led_classdev *led_cdev) static void asus_led_exit(struct asus_laptop *asus) { + if (!IS_ERR_OR_NULL(asus->wled.led.dev)) + led_classdev_unregister(&asus->wled.led); + if (!IS_ERR_OR_NULL(asus->bled.led.dev)) + led_classdev_unregister(&asus->bled.led); if (!IS_ERR_OR_NULL(asus->mled.led.dev)) led_classdev_unregister(&asus->mled.led); if (!IS_ERR_OR_NULL(asus->tled.led.dev)) @@ -642,7 +672,7 @@ static int asus_led_register(struct asus_laptop *asus, static int asus_led_init(struct asus_laptop *asus) { - int r; + int r = 0; /* * The Pegatron Lucid has no physical leds, but all methods are @@ -661,6 +691,16 @@ static int asus_led_init(struct asus_laptop *asus) if (!asus->led_workqueue) return -ENOMEM; + if (asus->wled_type == TYPE_LED) + r = asus_led_register(asus, &asus->wled, "asus::wlan", + METHOD_WLAN); + if (r) + goto error; + if (asus->bled_type == TYPE_LED) + r = asus_led_register(asus, &asus->bled, "asus::bluetooth", + METHOD_BLUETOOTH); + if (r) + goto error; r = asus_led_register(asus, &asus->mled, "asus::mail", METHOD_MLED); if (r) goto error; @@ -963,7 +1003,7 @@ static ssize_t store_wlan(struct device *dev, struct device_attribute *attr, return sysfs_acpi_set(asus, buf, count, METHOD_WLAN); } -/* +/*e * Bluetooth */ static int asus_bluetooth_set(struct asus_laptop *asus, int status) @@ -1228,7 +1268,7 @@ static ssize_t store_gps(struct device *dev, struct device_attribute *attr, ret = asus_gps_switch(asus, !!value); if (ret) return ret; - rfkill_set_sw_state(asus->gps_rfkill, !value); + rfkill_set_sw_state(asus->gps.rfkill, !value); return rv; } @@ -1246,90 +1286,139 @@ static const struct rfkill_ops asus_gps_rfkill_ops = { .set_block = asus_gps_rfkill_set, }; +static int asus_rfkill_set(void *data, bool blocked) +{ + struct asus_rfkill *rfk = data; + struct asus_laptop *asus = rfk->asus; + + if (rfk->control_id == WL_RSTS) + return asus_wlan_set(asus, !blocked); + else if (rfk->control_id == BT_RSTS) + return asus_bluetooth_set(asus, !blocked); + else if (rfk->control_id == WM_RSTS) + return asus_wimax_set(asus, !blocked); + else if (rfk->control_id == WW_RSTS) + return asus_wwan_set(asus, !blocked); + + return -EINVAL; +} + +static const struct rfkill_ops asus_rfkill_ops = { + .set_block = asus_rfkill_set, +}; + +static void asus_rfkill_terminate(struct asus_rfkill *rfk) +{ + if (!rfk->rfkill) + return ; + + rfkill_unregister(rfk->rfkill); + rfkill_destroy(rfk->rfkill); + rfk->rfkill = NULL; +} + static void asus_rfkill_exit(struct asus_laptop *asus) { - if (asus->gps_rfkill) { - rfkill_unregister(asus->gps_rfkill); - rfkill_destroy(asus->gps_rfkill); - asus->gps_rfkill = NULL; - } + asus_rfkill_terminate(&asus->wwan); + asus_rfkill_terminate(&asus->bluetooth); + asus_rfkill_terminate(&asus->wlan); + asus_rfkill_terminate(&asus->gps); } -static int asus_rfkill_init(struct asus_laptop *asus) +static int asus_rfkill_setup(struct asus_laptop *asus, struct asus_rfkill *rfk, + const char *name, int control_id, int type, + const struct rfkill_ops *ops) { int result; - if (acpi_check_handle(asus->handle, METHOD_GPS_ON, NULL) || - acpi_check_handle(asus->handle, METHOD_GPS_OFF, NULL) || - acpi_check_handle(asus->handle, METHOD_GPS_STATUS, NULL)) - return 0; - - asus->gps_rfkill = rfkill_alloc("asus-gps", &asus->platform_device->dev, - RFKILL_TYPE_GPS, - &asus_gps_rfkill_ops, asus); - if (!asus->gps_rfkill) + rfk->control_id = control_id; + rfk->asus = asus; + rfk->rfkill = rfkill_alloc(name, &asus->platform_device->dev, + type, ops, rfk); + if (!rfk->rfkill) return -EINVAL; - result = rfkill_register(asus->gps_rfkill); + result = rfkill_register(rfk->rfkill); if (result) { - rfkill_destroy(asus->gps_rfkill); - asus->gps_rfkill = NULL; + rfkill_destroy(rfk->rfkill); + rfk->rfkill = NULL; } return result; } -static int pega_rfkill_set(void *data, bool blocked) +static int asus_rfkill_init(struct asus_laptop *asus) { - struct asus_pega_rfkill *pega_rfk = data; + int result = 0; - int ret = asus_pega_lucid_set(pega_rfk->asus, pega_rfk->control_id, !blocked); - pr_warn("Setting rfkill %d, to %d; returned %d\n", pega_rfk->control_id, !blocked, ret); + if (asus->is_pega_lucid) + return -ENODEV; - return ret; -} + if (!acpi_check_handle(asus->handle, METHOD_GPS_ON, NULL) && + !acpi_check_handle(asus->handle, METHOD_GPS_OFF, NULL) && + !acpi_check_handle(asus->handle, METHOD_GPS_STATUS, NULL)) + result = asus_rfkill_setup(asus, &asus->gps, "asus-gps", + -1, RFKILL_TYPE_GPS, + &asus_gps_rfkill_ops); + if (result) + goto exit; -static const struct rfkill_ops pega_rfkill_ops = { - .set_block = pega_rfkill_set, -}; -static void pega_rfkill_terminate(struct asus_pega_rfkill *pega_rfk) -{ - pr_warn("Terminating %d\n", pega_rfk->control_id); - if (pega_rfk->rfkill) { - rfkill_unregister(pega_rfk->rfkill); - rfkill_destroy(pega_rfk->rfkill); - pega_rfk->rfkill = NULL; - } -} + if (!acpi_check_handle(asus->handle, METHOD_WLAN, NULL) && + asus->wled_type == TYPE_RFKILL) + result = asus_rfkill_setup(asus, &asus->wlan, "asus-wlan", + WL_RSTS, RFKILL_TYPE_WLAN, + &asus_rfkill_ops); + if (result) + goto exit; -static void pega_rfkill_exit(struct asus_laptop *asus) -{ - pega_rfkill_terminate(&asus->wwanrfk); - pega_rfkill_terminate(&asus->btrfk); - pega_rfkill_terminate(&asus->wlanrfk); + if (!acpi_check_handle(asus->handle, METHOD_BLUETOOTH, NULL) && + asus->bled_type == TYPE_RFKILL) + result = asus_rfkill_setup(asus, &asus->bluetooth, + "asus-bluetooth", BT_RSTS, + RFKILL_TYPE_BLUETOOTH, + &asus_rfkill_ops); + if (result) + goto exit; + + if (!acpi_check_handle(asus->handle, METHOD_WWAN, NULL)) + result = asus_rfkill_setup(asus, &asus->wwan, "asus-wwan", + WW_RSTS, RFKILL_TYPE_WWAN, + &asus_rfkill_ops); + if (result) + goto exit; + + if (!acpi_check_handle(asus->handle, METHOD_WIMAX, NULL)) + result = asus_rfkill_setup(asus, &asus->wimax, "asus-wimax", + WM_RSTS, RFKILL_TYPE_WIMAX, + &asus_rfkill_ops); + if (result) + goto exit; + +exit: + if (result) + asus_rfkill_exit(asus); + + return result; } -static int pega_rfkill_setup(struct asus_laptop *asus, struct asus_pega_rfkill *pega_rfk, - const char *name, int controlid, int rfkill_type) +static int pega_rfkill_set(void *data, bool blocked) { - int result; + struct asus_rfkill *rfk = data; - pr_warn("Setting up rfk %s, control %d, type %d\n", name, controlid, rfkill_type); - pega_rfk->control_id = controlid; - pega_rfk->asus = asus; - pega_rfk->rfkill = rfkill_alloc(name, &asus->platform_device->dev, - rfkill_type, &pega_rfkill_ops, pega_rfk); - if (!pega_rfk->rfkill) - return -EINVAL; + int ret = asus_pega_lucid_set(rfk->asus, rfk->control_id, !blocked); + return ret; +} - result = rfkill_register(pega_rfk->rfkill); - if (result) { - rfkill_destroy(pega_rfk->rfkill); - pega_rfk->rfkill = NULL; - } +static const struct rfkill_ops pega_rfkill_ops = { + .set_block = pega_rfkill_set, +}; - return result; +static int pega_rfkill_setup(struct asus_laptop *asus, struct asus_rfkill *rfk, + const char *name, int controlid, int rfkill_type) +{ + return asus_rfkill_setup(asus, rfk, name, controlid, rfkill_type, + &pega_rfkill_ops); } static int pega_rfkill_init(struct asus_laptop *asus) @@ -1339,22 +1428,22 @@ static int pega_rfkill_init(struct asus_laptop *asus) if(!asus->is_pega_lucid) return -ENODEV; - ret = pega_rfkill_setup(asus, &asus->wlanrfk, "pega-wlan", PEGA_WLAN, RFKILL_TYPE_WLAN); - if(ret) - return ret; - ret = pega_rfkill_setup(asus, &asus->btrfk, "pega-bt", PEGA_BLUETOOTH, RFKILL_TYPE_BLUETOOTH); + ret = pega_rfkill_setup(asus, &asus->wlan, "pega-wlan", + PEGA_WLAN, RFKILL_TYPE_WLAN); if(ret) - goto err_btrfk; - ret = pega_rfkill_setup(asus, &asus->wwanrfk, "pega-wwan", PEGA_WWAN, RFKILL_TYPE_WWAN); + goto exit; + + ret = pega_rfkill_setup(asus, &asus->bluetooth, "pega-bt", + PEGA_BLUETOOTH, RFKILL_TYPE_BLUETOOTH); if(ret) - goto err_wwanrfk; + goto exit; - pr_warn("Pega rfkill init succeeded\n"); - return 0; -err_wwanrfk: - pega_rfkill_terminate(&asus->btrfk); -err_btrfk: - pega_rfkill_terminate(&asus->wlanrfk); + ret = pega_rfkill_setup(asus, &asus->wwan, "pega-wwan", + PEGA_WWAN, RFKILL_TYPE_WWAN); + +exit: + if (ret) + asus_rfkill_exit(asus); return ret; } @@ -1364,8 +1453,10 @@ err_btrfk: */ static void asus_input_notify(struct asus_laptop *asus, int event) { - if (asus->inputdev) - sparse_keymap_report_event(asus->inputdev, event, 1, true); + if (!asus->inputdev) + return ; + if (!sparse_keymap_report_event(asus->inputdev, event, 1, true)) + pr_info("Unknown key %x pressed\n", event); } static int asus_input_init(struct asus_laptop *asus) @@ -1375,7 +1466,7 @@ static int asus_input_init(struct asus_laptop *asus) input = input_allocate_device(); if (!input) { - pr_info("Unable to allocate input device\n"); + pr_warn("Unable to allocate input device\n"); return -ENOMEM; } input->name = "Asus Laptop extra buttons"; @@ -1390,7 +1481,7 @@ static int asus_input_init(struct asus_laptop *asus) } error = input_register_device(input); if (error) { - pr_info("Unable to register input device\n"); + pr_warn("Unable to register input device\n"); goto err_free_keymap; } @@ -1688,7 +1779,16 @@ static int __devinit asus_acpi_init(struct asus_laptop *asus) if (result) return result; - /* WLED and BLED are on by default */ + if (!strcmp(bled_type, "led")) + asus->bled_type = TYPE_LED; + else if (!strcmp(bled_type, "rfkill")) + asus->bled_type = TYPE_RFKILL; + + if (!strcmp(wled_type, "led")) + asus->wled_type = TYPE_LED; + else if (!strcmp(wled_type, "rfkill")) + asus->wled_type = TYPE_RFKILL; + if (bluetooth_status >= 0) asus_bluetooth_set(asus, !!bluetooth_status); @@ -1786,7 +1886,7 @@ static int __devinit asus_acpi_add(struct acpi_device *device) goto fail_led; result = asus_rfkill_init(asus); - if (result) + if (result && result != -ENODEV) goto fail_rfkill; result = pega_accel_init(asus); @@ -1828,7 +1928,6 @@ static int asus_acpi_remove(struct acpi_device *device, int type) asus_led_exit(asus); asus_input_exit(asus); pega_accel_exit(asus); - pega_rfkill_exit(asus); asus_platform_exit(asus); kfree(asus->name); diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c index b0859d4..99a30b5 100644 --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -25,6 +25,7 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/input/sparse-keymap.h> +#include <linux/fb.h> #include "asus-wmi.h" @@ -51,9 +52,14 @@ static uint wapf; module_param(wapf, uint, 0444); MODULE_PARM_DESC(wapf, "WAPF value"); +static struct quirk_entry quirk_asus_unknown = { +}; + static void asus_nb_wmi_quirks(struct asus_wmi_driver *driver) { - driver->wapf = wapf; + driver->quirks = &quirk_asus_unknown; + driver->quirks->wapf = wapf; + driver->panel_power = FB_BLANK_UNBLANK; } static const struct key_entry asus_nb_wmi_keymap[] = { @@ -70,6 +76,8 @@ static const struct key_entry asus_nb_wmi_keymap[] = { { KE_KEY, 0x50, { KEY_EMAIL } }, { KE_KEY, 0x51, { KEY_WWW } }, { KE_KEY, 0x55, { KEY_CALC } }, + { KE_IGNORE, 0x57, }, /* Battery mode */ + { KE_IGNORE, 0x58, }, /* AC mode */ { KE_KEY, 0x5C, { KEY_F15 } }, /* Power Gear key */ { KE_KEY, 0x5D, { KEY_WLAN } }, /* Wireless console Toggle */ { KE_KEY, 0x5E, { KEY_WLAN } }, /* Wireless console Enable */ @@ -99,7 +107,7 @@ static struct asus_wmi_driver asus_nb_wmi_driver = { .keymap = asus_nb_wmi_keymap, .input_name = "Asus WMI hotkeys", .input_phys = ASUS_NB_WMI_FILE "/input0", - .quirks = asus_nb_wmi_quirks, + .detect_quirks = asus_nb_wmi_quirks, }; diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 9929246..77aadde 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -411,7 +411,7 @@ static int kbd_led_read(struct asus_wmi *asus, int *level, int *env) if (retval >= 0) { if (level) - *level = retval & 0x80 ? retval & 0x7F : 0; + *level = retval & 0x7F; if (env) *env = (retval >> 8) & 0x7F; retval = 0; @@ -784,7 +784,8 @@ static int asus_new_rfkill(struct asus_wmi *asus, arfkill->dev_id = dev_id; arfkill->asus = asus; - if (dev_id == ASUS_WMI_DEVID_WLAN && asus->driver->hotplug_wireless) + if (dev_id == ASUS_WMI_DEVID_WLAN && + asus->driver->quirks->hotplug_wireless) *rfkill = rfkill_alloc(name, &asus->platform_device->dev, type, &asus_rfkill_wlan_ops, arfkill); else @@ -895,7 +896,7 @@ static int asus_wmi_rfkill_init(struct asus_wmi *asus) if (result && result != -ENODEV) goto exit; - if (!asus->driver->hotplug_wireless) + if (!asus->driver->quirks->hotplug_wireless) goto exit; result = asus_setup_pci_hotplug(asus); @@ -1075,7 +1076,12 @@ static int asus_wmi_hwmon_init(struct asus_wmi *asus) */ static int read_backlight_power(struct asus_wmi *asus) { - int ret = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_BACKLIGHT); + int ret; + if (asus->driver->quirks->store_backlight_power) + ret = !asus->driver->panel_power; + else + ret = asus_wmi_get_devstate_simple(asus, + ASUS_WMI_DEVID_BACKLIGHT); if (ret < 0) return ret; @@ -1116,26 +1122,51 @@ static int read_brightness(struct backlight_device *bd) return retval & ASUS_WMI_DSTS_BRIGHTNESS_MASK; } -static int update_bl_status(struct backlight_device *bd) +static u32 get_scalar_command(struct backlight_device *bd) { struct asus_wmi *asus = bl_get_data(bd); - u32 ctrl_param; - int power, err; + u32 ctrl_param = 0; - ctrl_param = bd->props.brightness; + if ((asus->driver->brightness < bd->props.brightness) || + bd->props.brightness == bd->props.max_brightness) + ctrl_param = 0x00008001; + else if ((asus->driver->brightness > bd->props.brightness) || + bd->props.brightness == 0) + ctrl_param = 0x00008000; - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BRIGHTNESS, - ctrl_param, NULL); + asus->driver->brightness = bd->props.brightness; - if (err < 0) - return err; + return ctrl_param; +} + +static int update_bl_status(struct backlight_device *bd) +{ + struct asus_wmi *asus = bl_get_data(bd); + u32 ctrl_param; + int power, err = 0; power = read_backlight_power(asus); if (power != -ENODEV && bd->props.power != power) { ctrl_param = !!(bd->props.power == FB_BLANK_UNBLANK); err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, ctrl_param, NULL); + if (asus->driver->quirks->store_backlight_power) + asus->driver->panel_power = bd->props.power; + + /* When using scalar brightness, updating the brightness + * will mess with the backlight power */ + if (asus->driver->quirks->scalar_panel_brightness) + return err; } + + if (asus->driver->quirks->scalar_panel_brightness) + ctrl_param = get_scalar_command(bd); + else + ctrl_param = bd->props.brightness; + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BRIGHTNESS, + ctrl_param, NULL); + return err; } @@ -1196,10 +1227,15 @@ static int asus_wmi_backlight_init(struct asus_wmi *asus) asus->backlight_device = bd; + if (asus->driver->quirks->store_backlight_power) + asus->driver->panel_power = power; + bd->props.brightness = read_brightness(bd); bd->props.power = power; backlight_update_status(bd); + asus->driver->brightness = bd->props.brightness; + return 0; } @@ -1441,9 +1477,9 @@ static int asus_wmi_platform_init(struct asus_wmi *asus) /* CWAP allow to define the behavior of the Fn+F2 key, * this method doesn't seems to be present on Eee PCs */ - if (asus->driver->wapf >= 0) + if (asus->driver->quirks->wapf >= 0) asus_wmi_set_devstate(ASUS_WMI_DEVID_CWAP, - asus->driver->wapf, NULL); + asus->driver->quirks->wapf, NULL); return asus_wmi_sysfs_init(asus->platform_device); } @@ -1622,8 +1658,8 @@ static int asus_wmi_add(struct platform_device *pdev) wdrv->platform_device = pdev; platform_set_drvdata(asus->platform_device, asus); - if (wdrv->quirks) - wdrv->quirks(asus->driver); + if (wdrv->detect_quirks) + wdrv->detect_quirks(asus->driver); err = asus_wmi_platform_init(asus); if (err) diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h index 8147c10..d43b667 100644 --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -35,9 +35,16 @@ struct module; struct key_entry; struct asus_wmi; +struct quirk_entry { + bool hotplug_wireless; + bool scalar_panel_brightness; + bool store_backlight_power; + int wapf; +}; + struct asus_wmi_driver { - bool hotplug_wireless; - int wapf; + int brightness; + int panel_power; const char *name; struct module *owner; @@ -47,13 +54,14 @@ struct asus_wmi_driver { const struct key_entry *keymap; const char *input_name; const char *input_phys; + struct quirk_entry *quirks; /* Returns new code, value, and autorelease values in arguments. * Return ASUS_WMI_KEY_IGNORE in code if event should be ignored. */ void (*key_filter) (struct asus_wmi_driver *driver, int *code, unsigned int *value, bool *autorelease); int (*probe) (struct platform_device *device); - void (*quirks) (struct asus_wmi_driver *driver); + void (*detect_quirks) (struct asus_wmi_driver *driver); struct platform_driver platform_driver; struct platform_device *platform_device; diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c deleted file mode 100644 index 6f966d6..0000000 --- a/drivers/platform/x86/asus_acpi.c +++ /dev/null @@ -1,1513 +0,0 @@ -/* - * asus_acpi.c - Asus Laptop ACPI Extras - * - * - * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * The development page for this driver is located at - * http://sourceforge.net/projects/acpi4asus/ - * - * Credits: - * Pontus Fuchs - Helper functions, cleanup - * Johann Wiesner - Small compile fixes - * John Belmonte - ACPI code for Toshiba laptop was a good starting point. - * �ic Burghard - LED display support for W1N - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/backlight.h> -#include <acpi/acpi_drivers.h> -#include <acpi/acpi_bus.h> -#include <asm/uaccess.h> - -#define ASUS_ACPI_VERSION "0.30" - -#define PROC_ASUS "asus" /* The directory */ -#define PROC_MLED "mled" -#define PROC_WLED "wled" -#define PROC_TLED "tled" -#define PROC_BT "bluetooth" -#define PROC_LEDD "ledd" -#define PROC_INFO "info" -#define PROC_LCD "lcd" -#define PROC_BRN "brn" -#define PROC_DISP "disp" - -#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver" -#define ACPI_HOTK_CLASS "hotkey" -#define ACPI_HOTK_DEVICE_NAME "Hotkey" - -/* - * Some events we use, same for all Asus - */ -#define BR_UP 0x10 -#define BR_DOWN 0x20 - -/* - * Flags for hotk status - */ -#define MLED_ON 0x01 /* Mail LED */ -#define WLED_ON 0x02 /* Wireless LED */ -#define TLED_ON 0x04 /* Touchpad LED */ -#define BT_ON 0x08 /* Internal Bluetooth */ - -MODULE_AUTHOR("Julien Lerouge, Karol Kozimor"); -MODULE_DESCRIPTION(ACPI_HOTK_NAME); -MODULE_LICENSE("GPL"); - -static uid_t asus_uid; -static gid_t asus_gid; -module_param(asus_uid, uint, 0); -MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus"); -module_param(asus_gid, uint, 0); -MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus"); - -/* For each model, all features implemented, - * those marked with R are relative to HOTK, A for absolute */ -struct model_data { - char *name; /* name of the laptop________________A */ - char *mt_mled; /* method to handle mled_____________R */ - char *mled_status; /* node to handle mled reading_______A */ - char *mt_wled; /* method to handle wled_____________R */ - char *wled_status; /* node to handle wled reading_______A */ - char *mt_tled; /* method to handle tled_____________R */ - char *tled_status; /* node to handle tled reading_______A */ - char *mt_ledd; /* method to handle LED display______R */ - char *mt_bt_switch; /* method to switch Bluetooth on/off_R */ - char *bt_status; /* no model currently supports this__? */ - char *mt_lcd_switch; /* method to turn LCD on/off_________A */ - char *lcd_status; /* node to read LCD panel state______A */ - char *brightness_up; /* method to set brightness up_______A */ - char *brightness_down; /* method to set brightness down ____A */ - char *brightness_set; /* method to set absolute brightness_R */ - char *brightness_get; /* method to get absolute brightness_R */ - char *brightness_status;/* node to get brightness____________A */ - char *display_set; /* method to set video output________R */ - char *display_get; /* method to get video output________R */ -}; - -/* - * This is the main structure, we can use it to store anything interesting - * about the hotk device - */ -struct asus_hotk { - struct acpi_device *device; /* the device we are in */ - acpi_handle handle; /* the handle of the hotk device */ - char status; /* status of the hotk, for LEDs */ - u32 ledd_status; /* status of the LED display */ - struct model_data *methods; /* methods available on the laptop */ - u8 brightness; /* brightness level */ - enum { - A1x = 0, /* A1340D, A1300F */ - A2x, /* A2500H */ - A4G, /* A4700G */ - D1x, /* D1 */ - L2D, /* L2000D */ - L3C, /* L3800C */ - L3D, /* L3400D */ - L3H, /* L3H, L2000E, L5D */ - L4R, /* L4500R */ - L5x, /* L5800C */ - L8L, /* L8400L */ - M1A, /* M1300A */ - M2E, /* M2400E, L4400L */ - M6N, /* M6800N, W3400N */ - M6R, /* M6700R, A3000G */ - P30, /* Samsung P30 */ - S1x, /* S1300A, but also L1400B and M2400A (L84F) */ - S2x, /* S200 (J1 reported), Victor MP-XP7210 */ - W1N, /* W1000N */ - W5A, /* W5A */ - W3V, /* W3030V */ - xxN, /* M2400N, M3700N, M5200N, M6800N, - S1300N, S5200N*/ - A4S, /* Z81sp */ - F3Sa, /* (Centrino) */ - R1F, - END_MODEL - } model; /* Models currently supported */ - u16 event_count[128]; /* Count for each event TODO make this better */ -}; - -/* Here we go */ -#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0." -#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0." -#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0." -#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0." -#define S1x_PREFIX "\\_SB.PCI0.PX40." -#define S2x_PREFIX A1x_PREFIX -#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0." - -static struct model_data model_conf[END_MODEL] = { - /* - * TODO I have seen a SWBX and AIBX method on some models, like L1400B, - * it seems to be a kind of switch, but what for ? - */ - - { - .name = "A1x", - .mt_mled = "MLED", - .mled_status = "\\MAIL", - .mt_lcd_switch = A1x_PREFIX "_Q10", - .lcd_status = "\\BKLI", - .brightness_up = A1x_PREFIX "_Q0E", - .brightness_down = A1x_PREFIX "_Q0F"}, - - { - .name = "A2x", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\SG66", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\BAOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "A4G", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_lcd_switch = xxN_PREFIX "_Q10", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "D1x", - .mt_mled = "MLED", - .mt_lcd_switch = "\\Q0D", - .lcd_status = "\\GP11", - .brightness_up = "\\Q0C", - .brightness_down = "\\Q0B", - .brightness_status = "\\BLVL", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L2D", - .mt_mled = "MLED", - .mled_status = "\\SGP6", - .mt_wled = "WLED", - .wled_status = "\\RCP3", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\SGP0", - .brightness_up = "\\Q0E", - .brightness_down = "\\Q0F", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L3C", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = L3C_PREFIX "_Q10", - .lcd_status = "\\GL32", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"}, - - { - .name = "L3D", - .mt_mled = "MLED", - .mled_status = "\\MALD", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\BKLG", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L3H", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "EHK", - .lcd_status = "\\_SB.PCI0.PM.PBC", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L4R", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\_SB.PCI0.SBRG.SG13", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.PCI0.SBSM.SEO4", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, - - { - .name = "L5x", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_tled = "TLED", - .mt_lcd_switch = "\\Q0D", - .lcd_status = "\\BAOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L8L" -/* No features, but at least support the hotkeys */ - }, - - { - .name = "M1A", - .mt_mled = "MLED", - .mt_lcd_switch = M1A_PREFIX "Q10", - .lcd_status = "\\PNOF", - .brightness_up = M1A_PREFIX "Q0E", - .brightness_down = M1A_PREFIX "Q0F", - .brightness_status = "\\BRIT", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "M2E", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\GP06", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "M6N", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\_SB.PCI0.SBRG.SG13", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\SSTE"}, - - { - .name = "M6R", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.PCI0.SBSM.SEO4", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, - - { - .name = "P30", - .mt_wled = "WLED", - .mt_lcd_switch = P30_PREFIX "_Q0E", - .lcd_status = "\\BKLT", - .brightness_up = P30_PREFIX "_Q68", - .brightness_down = P30_PREFIX "_Q69", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\DNXT"}, - - { - .name = "S1x", - .mt_mled = "MLED", - .mled_status = "\\EMLE", - .mt_wled = "WLED", - .mt_lcd_switch = S1x_PREFIX "Q10", - .lcd_status = "\\PNOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV"}, - - { - .name = "S2x", - .mt_mled = "MLED", - .mled_status = "\\MAIL", - .mt_lcd_switch = S2x_PREFIX "_Q10", - .lcd_status = "\\BKLI", - .brightness_up = S2x_PREFIX "_Q0B", - .brightness_down = S2x_PREFIX "_Q0A"}, - - { - .name = "W1N", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_ledd = "SLCM", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "W5A", - .mt_bt_switch = "BLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "W3V", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "xxN", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"}, - - { - .name = "A4S", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .mt_bt_switch = "BLED", - .mt_wled = "WLED" - }, - - { - .name = "F3Sa", - .mt_bt_switch = "BLED", - .mt_wled = "WLED", - .mt_mled = "MLED", - .brightness_get = "GPLV", - .brightness_set = "SPLV", - .mt_lcd_switch = "\\_SB.PCI0.SBRG.EC0._Q10", - .lcd_status = "\\_SB.PCI0.SBRG.EC0.RPIN", - .display_get = "\\ADVG", - .display_set = "SDSP", - }, - { - .name = "R1F", - .mt_bt_switch = "BLED", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\GP06", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB" - } -}; - -/* procdir we use */ -static struct proc_dir_entry *asus_proc_dir; - -static struct backlight_device *asus_backlight_device; - -/* - * This header is made available to allow proper configuration given model, - * revision number , ... this info cannot go in struct asus_hotk because it is - * available before the hotk - */ -static struct acpi_table_header *asus_info; - -/* The actual device the driver binds to */ -static struct asus_hotk *hotk; - -/* - * The hotkey driver and autoloading declaration - */ -static int asus_hotk_add(struct acpi_device *device); -static int asus_hotk_remove(struct acpi_device *device, int type); -static void asus_hotk_notify(struct acpi_device *device, u32 event); - -static const struct acpi_device_id asus_device_ids[] = { - {"ATK0100", 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, asus_device_ids); - -static struct acpi_driver asus_hotk_driver = { - .name = "asus_acpi", - .class = ACPI_HOTK_CLASS, - .owner = THIS_MODULE, - .ids = asus_device_ids, - .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, - .ops = { - .add = asus_hotk_add, - .remove = asus_hotk_remove, - .notify = asus_hotk_notify, - }, -}; - -/* - * This function evaluates an ACPI method, given an int as parameter, the - * method is searched within the scope of the handle, can be NULL. The output - * of the method is written is output, which can also be NULL - * - * returns 1 if write is successful, 0 else. - */ -static int write_acpi_int(acpi_handle handle, const char *method, int val, - struct acpi_buffer *output) -{ - struct acpi_object_list params; /* list of input parameters (int) */ - union acpi_object in_obj; /* the only param we use */ - acpi_status status; - - params.count = 1; - params.pointer = &in_obj; - in_obj.type = ACPI_TYPE_INTEGER; - in_obj.integer.value = val; - - status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); - return (status == AE_OK); -} - -static int read_acpi_int(acpi_handle handle, const char *method, int *val) -{ - struct acpi_buffer output; - union acpi_object out_obj; - acpi_status status; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = acpi_evaluate_object(handle, (char *)method, NULL, &output); - *val = out_obj.integer.value; - return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); -} - -static int asus_info_proc_show(struct seq_file *m, void *v) -{ - int temp; - - seq_printf(m, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); - seq_printf(m, "Model reference : %s\n", hotk->methods->name); - /* - * The SFUN method probably allows the original driver to get the list - * of features supported by a given model. For now, 0x0100 or 0x0800 - * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. - * The significance of others is yet to be found. - */ - if (read_acpi_int(hotk->handle, "SFUN", &temp)) - seq_printf(m, "SFUN value : 0x%04x\n", temp); - /* - * Another value for userspace: the ASYM method returns 0x02 for - * battery low and 0x04 for battery critical, its readings tend to be - * more accurate than those provided by _BST. - * Note: since not all the laptops provide this method, errors are - * silently ignored. - */ - if (read_acpi_int(hotk->handle, "ASYM", &temp)) - seq_printf(m, "ASYM value : 0x%04x\n", temp); - if (asus_info) { - seq_printf(m, "DSDT length : %d\n", asus_info->length); - seq_printf(m, "DSDT checksum : %d\n", asus_info->checksum); - seq_printf(m, "DSDT revision : %d\n", asus_info->revision); - seq_printf(m, "OEM id : %.*s\n", ACPI_OEM_ID_SIZE, asus_info->oem_id); - seq_printf(m, "OEM table id : %.*s\n", ACPI_OEM_TABLE_ID_SIZE, asus_info->oem_table_id); - seq_printf(m, "OEM revision : 0x%x\n", asus_info->oem_revision); - seq_printf(m, "ASL comp vendor id : %.*s\n", ACPI_NAME_SIZE, asus_info->asl_compiler_id); - seq_printf(m, "ASL comp revision : 0x%x\n", asus_info->asl_compiler_revision); - } - - return 0; -} - -static int asus_info_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, asus_info_proc_show, NULL); -} - -static const struct file_operations asus_info_proc_fops = { - .owner = THIS_MODULE, - .open = asus_info_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * /proc handlers - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ - -/* Generic LED functions */ -static int read_led(const char *ledname, int ledmask) -{ - if (ledname) { - int led_status; - - if (read_acpi_int(NULL, ledname, &led_status)) - return led_status; - else - pr_warn("Error reading LED status\n"); - } - return (hotk->status & ledmask) ? 1 : 0; -} - -static int parse_arg(const char __user *buf, unsigned long count, int *val) -{ - char s[32]; - if (!count) - return 0; - if (count > 31) - return -EINVAL; - if (copy_from_user(s, buf, count)) - return -EFAULT; - s[count] = 0; - if (sscanf(s, "%i", val) != 1) - return -EINVAL; - return count; -} - -/* FIXME: kill extraneous args so it can be called independently */ -static int -write_led(const char __user *buffer, unsigned long count, - char *ledname, int ledmask, int invert) -{ - int rv, value; - int led_out = 0; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - led_out = value ? 1 : 0; - - hotk->status = - (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask); - - if (invert) /* invert target value */ - led_out = !led_out; - - if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) - pr_warn("LED (%s) write failed\n", ledname); - - return rv; -} - -/* - * Proc handlers for MLED - */ -static int mled_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_led(hotk->methods->mled_status, MLED_ON)); - return 0; -} - -static int mled_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, mled_proc_show, NULL); -} - -static ssize_t mled_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); -} - -static const struct file_operations mled_proc_fops = { - .owner = THIS_MODULE, - .open = mled_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = mled_proc_write, -}; - -/* - * Proc handlers for LED display - */ -static int ledd_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "0x%08x\n", hotk->ledd_status); - return 0; -} - -static int ledd_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, ledd_proc_show, NULL); -} - -static ssize_t ledd_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) { - if (!write_acpi_int - (hotk->handle, hotk->methods->mt_ledd, value, NULL)) - pr_warn("LED display write failed\n"); - else - hotk->ledd_status = (u32) value; - } - return rv; -} - -static const struct file_operations ledd_proc_fops = { - .owner = THIS_MODULE, - .open = ledd_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = ledd_proc_write, -}; - -/* - * Proc handlers for WLED - */ -static int wled_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_led(hotk->methods->wled_status, WLED_ON)); - return 0; -} - -static int wled_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, wled_proc_show, NULL); -} - -static ssize_t wled_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); -} - -static const struct file_operations wled_proc_fops = { - .owner = THIS_MODULE, - .open = wled_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = wled_proc_write, -}; - -/* - * Proc handlers for Bluetooth - */ -static int bluetooth_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_led(hotk->methods->bt_status, BT_ON)); - return 0; -} - -static int bluetooth_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, bluetooth_proc_show, NULL); -} - -static ssize_t bluetooth_proc_write(struct file *file, - const char __user *buffer, size_t count, loff_t *pos) -{ - /* Note: mt_bt_switch controls both internal Bluetooth adapter's - presence and its LED */ - return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0); -} - -static const struct file_operations bluetooth_proc_fops = { - .owner = THIS_MODULE, - .open = bluetooth_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = bluetooth_proc_write, -}; - -/* - * Proc handlers for TLED - */ -static int tled_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_led(hotk->methods->tled_status, TLED_ON)); - return 0; -} - -static int tled_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, tled_proc_show, NULL); -} - -static ssize_t tled_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); -} - -static const struct file_operations tled_proc_fops = { - .owner = THIS_MODULE, - .open = tled_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = tled_proc_write, -}; - -static int get_lcd_state(void) -{ - int lcd = 0; - - if (hotk->model == L3H) { - /* L3H and the like have to be handled differently */ - acpi_status status = 0; - struct acpi_object_list input; - union acpi_object mt_params[2]; - struct acpi_buffer output; - union acpi_object out_obj; - - input.count = 2; - input.pointer = mt_params; - /* Note: the following values are partly guessed up, but - otherwise they seem to work */ - mt_params[0].type = ACPI_TYPE_INTEGER; - mt_params[0].integer.value = 0x02; - mt_params[1].type = ACPI_TYPE_INTEGER; - mt_params[1].integer.value = 0x02; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = - acpi_evaluate_object(NULL, hotk->methods->lcd_status, - &input, &output); - if (status != AE_OK) - return -1; - if (out_obj.type == ACPI_TYPE_INTEGER) - /* That's what the AML code does */ - lcd = out_obj.integer.value >> 8; - } else if (hotk->model == F3Sa) { - unsigned long long tmp; - union acpi_object param; - struct acpi_object_list input; - acpi_status status; - - /* Read pin 11 */ - param.type = ACPI_TYPE_INTEGER; - param.integer.value = 0x11; - input.count = 1; - input.pointer = ¶m; - - status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status, - &input, &tmp); - if (status != AE_OK) - return -1; - - lcd = tmp; - } else { - /* We don't have to check anything if we are here */ - if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) - pr_warn("Error reading LCD status\n"); - - if (hotk->model == L2D) - lcd = ~lcd; - } - - return (lcd & 1); -} - -static int set_lcd_state(int value) -{ - int lcd = 0; - acpi_status status = 0; - - lcd = value ? 1 : 0; - if (lcd != get_lcd_state()) { - /* switch */ - if (hotk->model != L3H) { - status = - acpi_evaluate_object(NULL, - hotk->methods->mt_lcd_switch, - NULL, NULL); - } else { - /* L3H and the like must be handled differently */ - if (!write_acpi_int - (hotk->handle, hotk->methods->mt_lcd_switch, 0x07, - NULL)) - status = AE_ERROR; - /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress, - the exact behaviour is simulated here */ - } - if (ACPI_FAILURE(status)) - pr_warn("Error switching LCD\n"); - } - return 0; - -} - -static int lcd_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", get_lcd_state()); - return 0; -} - -static int lcd_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, lcd_proc_show, NULL); -} - -static ssize_t lcd_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - set_lcd_state(value); - return rv; -} - -static const struct file_operations lcd_proc_fops = { - .owner = THIS_MODULE, - .open = lcd_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = lcd_proc_write, -}; - -static int read_brightness(struct backlight_device *bd) -{ - int value; - - if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */ - if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get, - &value)) - pr_warn("Error reading brightness\n"); - } else if (hotk->methods->brightness_status) { /* For D1 for example */ - if (!read_acpi_int(NULL, hotk->methods->brightness_status, - &value)) - pr_warn("Error reading brightness\n"); - } else /* No GPLV method */ - value = hotk->brightness; - return value; -} - -/* - * Change the brightness level - */ -static int set_brightness(int value) -{ - acpi_status status = 0; - int ret = 0; - - /* SPLV laptop */ - if (hotk->methods->brightness_set) { - if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set, - value, NULL)) { - pr_warn("Error changing brightness\n"); - ret = -EIO; - } - goto out; - } - - /* No SPLV method if we are here, act as appropriate */ - value -= read_brightness(NULL); - while (value != 0) { - status = acpi_evaluate_object(NULL, (value > 0) ? - hotk->methods->brightness_up : - hotk->methods->brightness_down, - NULL, NULL); - (value > 0) ? value-- : value++; - if (ACPI_FAILURE(status)) { - pr_warn("Error changing brightness\n"); - ret = -EIO; - } - } -out: - return ret; -} - -static int set_brightness_status(struct backlight_device *bd) -{ - return set_brightness(bd->props.brightness); -} - -static int brn_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%d\n", read_brightness(NULL)); - return 0; -} - -static int brn_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, brn_proc_show, NULL); -} - -static ssize_t brn_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) { - value = (0 < value) ? ((15 < value) ? 15 : value) : 0; - /* 0 <= value <= 15 */ - set_brightness(value); - } - return rv; -} - -static const struct file_operations brn_proc_fops = { - .owner = THIS_MODULE, - .open = brn_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = brn_proc_write, -}; - -static void set_display(int value) -{ - /* no sanity check needed for now */ - if (!write_acpi_int(hotk->handle, hotk->methods->display_set, - value, NULL)) - pr_warn("Error setting display\n"); - return; -} - -/* - * Now, *this* one could be more user-friendly, but so far, no-one has - * complained. The significance of bits is the same as in proc_write_disp() - */ -static int disp_proc_show(struct seq_file *m, void *v) -{ - int value = 0; - - if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value)) - pr_warn("Error reading display status\n"); - value &= 0x07; /* needed for some models, shouldn't hurt others */ - seq_printf(m, "%d\n", value); - return 0; -} - -static int disp_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, disp_proc_show, NULL); -} - -/* - * Experimental support for display switching. As of now: 1 should activate - * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination - * (bitwise) of these will suffice. I never actually tested 3 displays hooked - * up simultaneously, so be warned. See the acpi4asus README for more info. - */ -static ssize_t disp_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - int rv, value; - - rv = parse_arg(buffer, count, &value); - if (rv > 0) - set_display(value); - return rv; -} - -static const struct file_operations disp_proc_fops = { - .owner = THIS_MODULE, - .open = disp_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = disp_proc_write, -}; - -static int -asus_proc_add(char *name, const struct file_operations *proc_fops, umode_t mode, - struct acpi_device *device) -{ - struct proc_dir_entry *proc; - - proc = proc_create_data(name, mode, acpi_device_dir(device), - proc_fops, acpi_driver_data(device)); - if (!proc) { - pr_warn(" Unable to create %s fs entry\n", name); - return -1; - } - proc->uid = asus_uid; - proc->gid = asus_gid; - return 0; -} - -static int asus_hotk_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *proc; - umode_t mode; - - if ((asus_uid == 0) && (asus_gid == 0)) { - mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP; - } else { - mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP; - pr_warn(" asus_uid and asus_gid parameters are " - "deprecated, use chown and chmod instead!\n"); - } - - acpi_device_dir(device) = asus_proc_dir; - if (!acpi_device_dir(device)) - return -ENODEV; - - proc = proc_create(PROC_INFO, mode, acpi_device_dir(device), - &asus_info_proc_fops); - if (proc) { - proc->uid = asus_uid; - proc->gid = asus_gid; - } else { - pr_warn(" Unable to create " PROC_INFO " fs entry\n"); - } - - if (hotk->methods->mt_wled) { - asus_proc_add(PROC_WLED, &wled_proc_fops, mode, device); - } - - if (hotk->methods->mt_ledd) { - asus_proc_add(PROC_LEDD, &ledd_proc_fops, mode, device); - } - - if (hotk->methods->mt_mled) { - asus_proc_add(PROC_MLED, &mled_proc_fops, mode, device); - } - - if (hotk->methods->mt_tled) { - asus_proc_add(PROC_TLED, &tled_proc_fops, mode, device); - } - - if (hotk->methods->mt_bt_switch) { - asus_proc_add(PROC_BT, &bluetooth_proc_fops, mode, device); - } - - /* - * We need both read node and write method as LCD switch is also - * accessible from the keyboard - */ - if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { - asus_proc_add(PROC_LCD, &lcd_proc_fops, mode, device); - } - - if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || - (hotk->methods->brightness_get && hotk->methods->brightness_set)) { - asus_proc_add(PROC_BRN, &brn_proc_fops, mode, device); - } - - if (hotk->methods->display_set) { - asus_proc_add(PROC_DISP, &disp_proc_fops, mode, device); - } - - return 0; -} - -static int asus_hotk_remove_fs(struct acpi_device *device) -{ - if (acpi_device_dir(device)) { - remove_proc_entry(PROC_INFO, acpi_device_dir(device)); - if (hotk->methods->mt_wled) - remove_proc_entry(PROC_WLED, acpi_device_dir(device)); - if (hotk->methods->mt_mled) - remove_proc_entry(PROC_MLED, acpi_device_dir(device)); - if (hotk->methods->mt_tled) - remove_proc_entry(PROC_TLED, acpi_device_dir(device)); - if (hotk->methods->mt_ledd) - remove_proc_entry(PROC_LEDD, acpi_device_dir(device)); - if (hotk->methods->mt_bt_switch) - remove_proc_entry(PROC_BT, acpi_device_dir(device)); - if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) - remove_proc_entry(PROC_LCD, acpi_device_dir(device)); - if ((hotk->methods->brightness_up - && hotk->methods->brightness_down) - || (hotk->methods->brightness_get - && hotk->methods->brightness_set)) - remove_proc_entry(PROC_BRN, acpi_device_dir(device)); - if (hotk->methods->display_set) - remove_proc_entry(PROC_DISP, acpi_device_dir(device)); - } - return 0; -} - -static void asus_hotk_notify(struct acpi_device *device, u32 event) -{ - /* TODO Find a better way to handle events count. */ - if (!hotk) - return; - - /* - * The BIOS *should* be sending us device events, but apparently - * Asus uses system events instead, so just ignore any device - * events we get. - */ - if (event > ACPI_MAX_SYS_NOTIFY) - return; - - if ((event & ~((u32) BR_UP)) < 16) - hotk->brightness = (event & ~((u32) BR_UP)); - else if ((event & ~((u32) BR_DOWN)) < 16) - hotk->brightness = (event & ~((u32) BR_DOWN)); - - acpi_bus_generate_proc_event(hotk->device, event, - hotk->event_count[event % 128]++); - - return; -} - -/* - * Match the model string to the list of supported models. Return END_MODEL if - * no match or model is NULL. - */ -static int asus_model_match(char *model) -{ - if (model == NULL) - return END_MODEL; - - if (strncmp(model, "L3D", 3) == 0) - return L3D; - else if (strncmp(model, "L2E", 3) == 0 || - strncmp(model, "L3H", 3) == 0 || strncmp(model, "L5D", 3) == 0) - return L3H; - else if (strncmp(model, "L3", 2) == 0 || strncmp(model, "L2B", 3) == 0) - return L3C; - else if (strncmp(model, "L8L", 3) == 0) - return L8L; - else if (strncmp(model, "L4R", 3) == 0) - return L4R; - else if (strncmp(model, "M6N", 3) == 0 || strncmp(model, "W3N", 3) == 0) - return M6N; - else if (strncmp(model, "M6R", 3) == 0 || strncmp(model, "A3G", 3) == 0) - return M6R; - else if (strncmp(model, "M2N", 3) == 0 || - strncmp(model, "M3N", 3) == 0 || - strncmp(model, "M5N", 3) == 0 || - strncmp(model, "S1N", 3) == 0 || - strncmp(model, "S5N", 3) == 0) - return xxN; - else if (strncmp(model, "M1", 2) == 0) - return M1A; - else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0) - return M2E; - else if (strncmp(model, "L2", 2) == 0) - return L2D; - else if (strncmp(model, "L8", 2) == 0) - return S1x; - else if (strncmp(model, "D1", 2) == 0) - return D1x; - else if (strncmp(model, "A1", 2) == 0) - return A1x; - else if (strncmp(model, "A2", 2) == 0) - return A2x; - else if (strncmp(model, "J1", 2) == 0) - return S2x; - else if (strncmp(model, "L5", 2) == 0) - return L5x; - else if (strncmp(model, "A4G", 3) == 0) - return A4G; - else if (strncmp(model, "W1N", 3) == 0) - return W1N; - else if (strncmp(model, "W3V", 3) == 0) - return W3V; - else if (strncmp(model, "W5A", 3) == 0) - return W5A; - else if (strncmp(model, "R1F", 3) == 0) - return R1F; - else if (strncmp(model, "A4S", 3) == 0) - return A4S; - else if (strncmp(model, "F3Sa", 4) == 0) - return F3Sa; - else - return END_MODEL; -} - -/* - * This function is used to initialize the hotk with right values. In this - * method, we can make all the detection we want, and modify the hotk struct - */ -static int asus_hotk_get_info(void) -{ - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *model = NULL; - int bsts_result; - char *string = NULL; - acpi_status status; - - /* - * Get DSDT headers early enough to allow for differentiating between - * models, but late enough to allow acpi_bus_register_driver() to fail - * before doing anything ACPI-specific. Should we encounter a machine, - * which needs special handling (i.e. its hotkey device has a different - * HID), this bit will be moved. A global variable asus_info contains - * the DSDT header. - */ - status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info); - if (ACPI_FAILURE(status)) - pr_warn(" Couldn't get the DSDT table header\n"); - - /* We have to write 0 on init this far for all ASUS models */ - if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { - pr_err(" Hotkey initialization failed\n"); - return -ENODEV; - } - - /* This needs to be called for some laptops to init properly */ - if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result)) - pr_warn(" Error calling BSTS\n"); - else if (bsts_result) - pr_notice(" BSTS called, 0x%02x returned\n", bsts_result); - - /* - * Try to match the object returned by INIT to the specific model. - * Handle every possible object (or the lack of thereof) the DSDT - * writers might throw at us. When in trouble, we pass NULL to - * asus_model_match() and try something completely different. - */ - if (buffer.pointer) { - model = buffer.pointer; - switch (model->type) { - case ACPI_TYPE_STRING: - string = model->string.pointer; - break; - case ACPI_TYPE_BUFFER: - string = model->buffer.pointer; - break; - default: - kfree(model); - model = NULL; - break; - } - } - hotk->model = asus_model_match(string); - if (hotk->model == END_MODEL) { /* match failed */ - if (asus_info && - strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) { - hotk->model = P30; - pr_notice(" Samsung P30 detected, supported\n"); - hotk->methods = &model_conf[hotk->model]; - kfree(model); - return 0; - } else { - hotk->model = M2E; - pr_notice(" unsupported model %s, trying default values\n", - string); - pr_notice(" send /proc/acpi/dsdt to the developers\n"); - kfree(model); - return -ENODEV; - } - } - hotk->methods = &model_conf[hotk->model]; - pr_notice(" %s model detected, supported\n", string); - - /* Sort of per-model blacklist */ - if (strncmp(string, "L2B", 3) == 0) - hotk->methods->lcd_status = NULL; - /* L2B is similar enough to L3C to use its settings, with this only - exception */ - else if (strncmp(string, "A3G", 3) == 0) - hotk->methods->lcd_status = "\\BLFG"; - /* A3G is like M6R */ - else if (strncmp(string, "S5N", 3) == 0 || - strncmp(string, "M5N", 3) == 0 || - strncmp(string, "W3N", 3) == 0) - hotk->methods->mt_mled = NULL; - /* S5N, M5N and W3N have no MLED */ - else if (strncmp(string, "L5D", 3) == 0) - hotk->methods->mt_wled = NULL; - /* L5D's WLED is not controlled by ACPI */ - else if (strncmp(string, "M2N", 3) == 0 || - strncmp(string, "W3V", 3) == 0 || - strncmp(string, "S1N", 3) == 0) - hotk->methods->mt_wled = "WLED"; - /* M2N, S1N and W3V have a usable WLED */ - else if (asus_info) { - if (strncmp(asus_info->oem_table_id, "L1", 2) == 0) - hotk->methods->mled_status = NULL; - /* S1300A reports L84F, but L1400B too, account for that */ - } - - kfree(model); - - return 0; -} - -static int asus_hotk_check(void) -{ - int result = 0; - - result = acpi_bus_get_status(hotk->device); - if (result) - return result; - - if (hotk->device->status.present) { - result = asus_hotk_get_info(); - } else { - pr_err(" Hotkey device not present, aborting\n"); - return -EINVAL; - } - - return result; -} - -static int asus_hotk_found; - -static int asus_hotk_add(struct acpi_device *device) -{ - acpi_status status = AE_OK; - int result; - - pr_notice("Asus Laptop ACPI Extras version %s\n", ASUS_ACPI_VERSION); - - hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL); - if (!hotk) - return -ENOMEM; - - hotk->handle = device->handle; - strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_HOTK_CLASS); - device->driver_data = hotk; - hotk->device = device; - - result = asus_hotk_check(); - if (result) - goto end; - - result = asus_hotk_add_fs(device); - if (result) - goto end; - - /* For laptops without GPLV: init the hotk->brightness value */ - if ((!hotk->methods->brightness_get) - && (!hotk->methods->brightness_status) - && (hotk->methods->brightness_up && hotk->methods->brightness_down)) { - status = - acpi_evaluate_object(NULL, hotk->methods->brightness_down, - NULL, NULL); - if (ACPI_FAILURE(status)) - pr_warn(" Error changing brightness\n"); - else { - status = - acpi_evaluate_object(NULL, - hotk->methods->brightness_up, - NULL, NULL); - if (ACPI_FAILURE(status)) - pr_warn(" Strange, error changing brightness\n"); - } - } - - asus_hotk_found = 1; - - /* LED display is off by default */ - hotk->ledd_status = 0xFFF; - -end: - if (result) - kfree(hotk); - - return result; -} - -static int asus_hotk_remove(struct acpi_device *device, int type) -{ - asus_hotk_remove_fs(device); - - kfree(hotk); - - return 0; -} - -static const struct backlight_ops asus_backlight_data = { - .get_brightness = read_brightness, - .update_status = set_brightness_status, -}; - -static void asus_acpi_exit(void) -{ - if (asus_backlight_device) - backlight_device_unregister(asus_backlight_device); - - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - - return; -} - -static int __init asus_acpi_init(void) -{ - struct backlight_properties props; - int result; - - result = acpi_bus_register_driver(&asus_hotk_driver); - if (result < 0) - return result; - - asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); - if (!asus_proc_dir) { - pr_err("Unable to create /proc entry\n"); - acpi_bus_unregister_driver(&asus_hotk_driver); - return -ENODEV; - } - - /* - * This is a bit of a kludge. We only want this module loaded - * for ASUS systems, but there's currently no way to probe the - * ACPI namespace for ASUS HIDs. So we just return failure if - * we didn't find one, which will cause the module to be - * unloaded. - */ - if (!asus_hotk_found) { - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - return -ENODEV; - } - - memset(&props, 0, sizeof(struct backlight_properties)); - props.type = BACKLIGHT_PLATFORM; - props.max_brightness = 15; - asus_backlight_device = backlight_device_register("asus", NULL, NULL, - &asus_backlight_data, - &props); - if (IS_ERR(asus_backlight_device)) { - pr_err("Could not register asus backlight device\n"); - asus_backlight_device = NULL; - asus_acpi_exit(); - return -ENODEV; - } - - return 0; -} - -module_init(asus_acpi_init); -module_exit(asus_acpi_exit); diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index d967344..1887e2f 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -882,6 +882,7 @@ static struct dmi_system_id __initdata compal_dmi_table[] = { }, { } }; +MODULE_DEVICE_TABLE(dmi, compal_dmi_table); static void initialize_power_supply_data(struct compal_data *data) { @@ -1097,16 +1098,3 @@ MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)"); MODULE_DESCRIPTION("Compal Laptop Support"); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); - -MODULE_ALIAS("dmi:*:rnIFL90:rvrIFT00:*"); -MODULE_ALIAS("dmi:*:rnIFL90:rvrREFERENCE:*"); -MODULE_ALIAS("dmi:*:rnIFL91:rvrIFT00:*"); -MODULE_ALIAS("dmi:*:rnJFL92:rvrIFT00:*"); -MODULE_ALIAS("dmi:*:rnIFT00:rvrIFT00:*"); -MODULE_ALIAS("dmi:*:rnJHL90:rvrREFERENCE:*"); -MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron910:*"); -MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1010:*"); -MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1011:*"); -MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1012:*"); -MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1110:*"); -MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1210:*"); diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index d93e962..a05fc9c 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -117,6 +117,7 @@ static const struct dmi_system_id __initdata dell_device_table[] = { }, { } }; +MODULE_DEVICE_TABLE(dmi, dell_device_table); static struct dmi_system_id __devinitdata dell_blacklist[] = { /* Supported by compal-laptop */ @@ -184,6 +185,33 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { }, .driver_data = &quirk_dell_vostro_v130, }, + { + .callback = dmi_matched, + .ident = "Dell Vostro 3555", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3555"), + }, + .driver_data = &quirk_dell_vostro_v130, + }, + { + .callback = dmi_matched, + .ident = "Dell Inspiron N311z", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron N311z"), + }, + .driver_data = &quirk_dell_vostro_v130, + }, + { + .callback = dmi_matched, + .ident = "Dell Inspiron M5110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron M5110"), + }, + .driver_data = &quirk_dell_vostro_v130, + }, }; static struct calling_interface_buffer *buffer; @@ -236,9 +264,7 @@ static void __init find_tokens(const struct dmi_header *dm, void *dummy) { switch (dm->type) { case 0xd4: /* Indexed IO */ - break; case 0xd5: /* Protected Area Type 1 */ - break; case 0xd6: /* Protected Area Type 2 */ break; case 0xda: /* Calling interface */ @@ -615,6 +641,7 @@ static void touchpad_led_set(struct led_classdev *led_cdev, static struct led_classdev touchpad_led = { .name = "dell-laptop::touchpad", .brightness_set = touchpad_led_set, + .flags = LED_CORE_SUSPENDRESUME, }; static int __devinit touchpad_led_init(struct device *dev) @@ -794,6 +821,3 @@ module_exit(dell_exit); MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>"); MODULE_DESCRIPTION("Dell laptop driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("dmi:*svnDellInc.:*:ct8:*"); -MODULE_ALIAS("dmi:*svnDellInc.:*:ct9:*"); -MODULE_ALIAS("dmi:*svnDellComputerCorporation.:*:ct8:*"); diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d9a9e2b..dab91b4 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1251,6 +1251,14 @@ static void eeepc_input_exit(struct eeepc_laptop *eeepc) /* * ACPI driver */ +static void eeepc_input_notify(struct eeepc_laptop *eeepc, int event) +{ + if (!eeepc->inputdev) + return ; + if (!sparse_keymap_report_event(eeepc->inputdev, event, 1, true)) + pr_info("Unknown key %x pressed\n", event); +} + static void eeepc_acpi_notify(struct acpi_device *device, u32 event) { struct eeepc_laptop *eeepc = acpi_driver_data(device); @@ -1287,12 +1295,11 @@ static void eeepc_acpi_notify(struct acpi_device *device, u32 event) * event will be desired value (or else ignored) */ } - sparse_keymap_report_event(eeepc->inputdev, event, - 1, true); + eeepc_input_notify(eeepc, event); } } else { /* Everything else is a bona-fide keypress event */ - sparse_keymap_report_event(eeepc->inputdev, event, 1, true); + eeepc_input_notify(eeepc, event); } } diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c index 9f6e643..6567613 100644 --- a/drivers/platform/x86/eeepc-wmi.c +++ b/drivers/platform/x86/eeepc-wmi.c @@ -32,6 +32,7 @@ #include <linux/input.h> #include <linux/input/sparse-keymap.h> #include <linux/dmi.h> +#include <linux/fb.h> #include <acpi/acpi_bus.h> #include "asus-wmi.h" @@ -84,9 +85,81 @@ static const struct key_entry eeepc_wmi_keymap[] = { { KE_KEY, 0xed, { KEY_CAMERA_DOWN } }, { KE_KEY, 0xee, { KEY_CAMERA_LEFT } }, { KE_KEY, 0xef, { KEY_CAMERA_RIGHT } }, + { KE_KEY, 0xf3, { KEY_MENU } }, + { KE_KEY, 0xf5, { KEY_HOMEPAGE } }, + { KE_KEY, 0xf6, { KEY_ESC } }, { KE_END, 0}, }; +static struct quirk_entry quirk_asus_unknown = { +}; + +static struct quirk_entry quirk_asus_1000h = { + .hotplug_wireless = true, +}; + +static struct quirk_entry quirk_asus_et2012_type1 = { + .store_backlight_power = true, +}; + +static struct quirk_entry quirk_asus_et2012_type3 = { + .scalar_panel_brightness = true, + .store_backlight_power = true, +}; + +static struct quirk_entry *quirks; + +static void et2012_quirks(void) +{ + const struct dmi_device *dev = NULL; + char oemstring[30]; + + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, "AEMS%24c", oemstring) == 1) { + if (oemstring[18] == '1') + quirks = &quirk_asus_et2012_type1; + else if (oemstring[18] == '3') + quirks = &quirk_asus_et2012_type3; + break; + } + } +} + +static int dmi_matched(const struct dmi_system_id *dmi) +{ + char *model; + + quirks = dmi->driver_data; + + model = (char *)dmi->matches[1].substr; + if (unlikely(strncmp(model, "ET2012", 6) == 0)) + et2012_quirks(); + + return 1; +} + +static struct dmi_system_id asus_quirks[] = { + { + .callback = dmi_matched, + .ident = "ASUSTeK Computer INC. 1000H", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "1000H"), + }, + .driver_data = &quirk_asus_1000h, + }, + { + .callback = dmi_matched, + .ident = "ASUSTeK Computer INC. ET2012E/I", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "ET2012"), + }, + .driver_data = &quirk_asus_unknown, + }, + {}, +}; + static void eeepc_wmi_key_filter(struct asus_wmi_driver *asus_wmi, int *code, unsigned int *value, bool *autorelease) { @@ -141,33 +214,16 @@ static int eeepc_wmi_probe(struct platform_device *pdev) return 0; } -static void eeepc_dmi_check(struct asus_wmi_driver *driver) -{ - const char *model; - - model = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!model) - return; - - /* - * Whitelist for wlan hotplug - * - * Asus 1000H needs the current hotplug code to handle - * Fn+F2 correctly. We may add other Asus here later, but - * it seems that most of the laptops supported by asus-wmi - * don't need to be on this list - */ - if (strcmp(model, "1000H") == 0) { - driver->hotplug_wireless = true; - pr_info("wlan hotplug enabled\n"); - } -} - static void eeepc_wmi_quirks(struct asus_wmi_driver *driver) { - driver->hotplug_wireless = hotplug_wireless; - driver->wapf = -1; - eeepc_dmi_check(driver); + quirks = &quirk_asus_unknown; + quirks->hotplug_wireless = hotplug_wireless; + + dmi_check_system(asus_quirks); + + driver->quirks = quirks; + driver->quirks->wapf = -1; + driver->panel_power = FB_BLANK_UNBLANK; } static struct asus_wmi_driver asus_wmi_driver = { @@ -179,7 +235,7 @@ static struct asus_wmi_driver asus_wmi_driver = { .input_phys = EEEPC_WMI_FILE "/input0", .key_filter = eeepc_wmi_key_filter, .probe = eeepc_wmi_probe, - .quirks = eeepc_wmi_quirks, + .detect_quirks = eeepc_wmi_quirks, }; diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c index ba68d4e..7387f97 100644 --- a/drivers/platform/x86/hdaps.c +++ b/drivers/platform/x86/hdaps.c @@ -375,7 +375,7 @@ static ssize_t hdaps_variance_show(struct device *dev, static ssize_t hdaps_temp1_show(struct device *dev, struct device_attribute *attr, char *buf) { - u8 temp; + u8 uninitialized_var(temp); int ret; ret = hdaps_readb_one(HDAPS_PORT_TEMP1, &temp); @@ -388,7 +388,7 @@ static ssize_t hdaps_temp1_show(struct device *dev, static ssize_t hdaps_temp2_show(struct device *dev, struct device_attribute *attr, char *buf) { - u8 temp; + u8 uninitialized_var(temp); int ret; ret = hdaps_readb_one(HDAPS_PORT_TEMP2, &temp); diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 88a98cf..f7ba316e 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -609,25 +609,16 @@ static bool mcp_exceeded(struct ips_driver *ips) bool ret = false; u32 temp_limit; u32 avg_power; - const char *msg = "MCP limit exceeded: "; spin_lock_irqsave(&ips->turbo_status_lock, flags); temp_limit = ips->mcp_temp_limit * 100; - if (ips->mcp_avg_temp > temp_limit) { - dev_info(&ips->dev->dev, - "%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp, - temp_limit); + if (ips->mcp_avg_temp > temp_limit) ret = true; - } avg_power = ips->cpu_avg_power + ips->mch_avg_power; - if (avg_power > ips->mcp_power_limit) { - dev_info(&ips->dev->dev, - "%sAvg power %u, limit %u\n", msg, avg_power, - ips->mcp_power_limit); + if (avg_power > ips->mcp_power_limit) ret = true; - } spin_unlock_irqrestore(&ips->turbo_status_lock, flags); diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c index 0903a88..0a3594c 100644 --- a/drivers/platform/x86/intel_mid_powerbtn.c +++ b/drivers/platform/x86/intel_mid_powerbtn.c @@ -142,17 +142,7 @@ static struct platform_driver mfld_pb_driver = { .remove = __devexit_p(mfld_pb_remove), }; -static int __init mfld_pb_init(void) -{ - return platform_driver_register(&mfld_pb_driver); -} -module_init(mfld_pb_init); - -static void __exit mfld_pb_exit(void) -{ - platform_driver_unregister(&mfld_pb_driver); -} -module_exit(mfld_pb_exit); +module_platform_driver(mfld_pb_driver); MODULE_AUTHOR("Hong Liu <hong.liu@intel.com>"); MODULE_DESCRIPTION("Intel Medfield Power Button Driver"); diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index 2ee9766..5ae9cd9 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -549,6 +549,7 @@ static int mid_thermal_remove(struct platform_device *pdev) static const struct platform_device_id therm_id_table[] = { { DRIVER_NAME, 1 }, + { "msic_thermal", 1 }, { } }; @@ -564,18 +565,7 @@ static struct platform_driver mid_thermal_driver = { .id_table = therm_id_table, }; -static int __init mid_thermal_module_init(void) -{ - return platform_driver_register(&mid_thermal_driver); -} - -static void __exit mid_thermal_module_exit(void) -{ - platform_driver_unregister(&mid_thermal_driver); -} - -module_init(mid_thermal_module_init); -module_exit(mid_thermal_module_exit); +module_platform_driver(mid_thermal_driver); MODULE_AUTHOR("Durgadoss R <durgadoss.r@intel.com>"); MODULE_DESCRIPTION("Intel Medfield Platform Thermal Driver"); diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c index 6ee0b5c..79a0c2f 100644 --- a/drivers/platform/x86/intel_oaktrail.c +++ b/drivers/platform/x86/intel_oaktrail.c @@ -313,6 +313,7 @@ static struct dmi_system_id __initdata oaktrail_dmi_table[] = { }, { } }; +MODULE_DEVICE_TABLE(dmi, oaktrail_dmi_table); static int __init oaktrail_init(void) { @@ -394,4 +395,3 @@ MODULE_AUTHOR("Yin Kangkai (kangkai.yin@intel.com)"); MODULE_DESCRIPTION("Intel Oaktrail Platform ACPI Extras"); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); -MODULE_ALIAS("dmi:*:svnIntelCorporation:pnOakTrailplatform:*"); diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index fd73ea8..e2a34b4 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -17,10 +17,18 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/backlight.h> +#include <linux/leds.h> #include <linux/fb.h> #include <linux/dmi.h> #include <linux/platform_device.h> #include <linux/rfkill.h> +#include <linux/acpi.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> +#include <linux/ctype.h> +#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE) +#include <acpi/video.h> +#endif /* * This driver is needed because a number of Samsung laptops do not hook @@ -41,9 +49,20 @@ #define SABI_IFACE_COMPLETE 0x04 #define SABI_IFACE_DATA 0x05 -/* Structure to get data back to the calling function */ -struct sabi_retval { - u8 retval[20]; +#define WL_STATUS_WLAN 0x0 +#define WL_STATUS_BT 0x2 + +/* Structure get/set data using sabi */ +struct sabi_data { + union { + struct { + u32 d0; + u32 d1; + u16 d2; + u8 d3; + }; + u8 data[11]; + }; }; struct sabi_header_offsets { @@ -60,8 +79,8 @@ struct sabi_commands { * Brightness is 0 - 8, as described above. * Value 0 is for the BIOS to use */ - u8 get_brightness; - u8 set_brightness; + u16 get_brightness; + u16 set_brightness; /* * first byte: @@ -72,40 +91,56 @@ struct sabi_commands { * 0x03 - 3G is on * TODO, verify 3G is correct, that doesn't seem right... */ - u8 get_wireless_button; - u8 set_wireless_button; + u16 get_wireless_button; + u16 set_wireless_button; /* 0 is off, 1 is on */ - u8 get_backlight; - u8 set_backlight; + u16 get_backlight; + u16 set_backlight; /* * 0x80 or 0x00 - no action * 0x81 - recovery key pressed */ - u8 get_recovery_mode; - u8 set_recovery_mode; + u16 get_recovery_mode; + u16 set_recovery_mode; /* * on seclinux: 0 is low, 1 is high, * on swsmi: 0 is normal, 1 is silent, 2 is turbo */ - u8 get_performance_level; - u8 set_performance_level; + u16 get_performance_level; + u16 set_performance_level; + + /* 0x80 is off, 0x81 is on */ + u16 get_battery_life_extender; + u16 set_battery_life_extender; + + /* 0x80 is off, 0x81 is on */ + u16 get_usb_charge; + u16 set_usb_charge; + + /* the first byte is for bluetooth and the third one is for wlan */ + u16 get_wireless_status; + u16 set_wireless_status; + + /* 0x81 to read, (0x82 | level << 8) to set, 0xaabb to enable */ + u16 kbd_backlight; /* * Tell the BIOS that Linux is running on this machine. * 81 is on, 80 is off */ - u8 set_linux; + u16 set_linux; }; struct sabi_performance_level { const char *name; - u8 value; + u16 value; }; struct sabi_config { + int sabi_version; const char *test_string; u16 main_function; const struct sabi_header_offsets header_offsets; @@ -117,6 +152,10 @@ struct sabi_config { static const struct sabi_config sabi_configs[] = { { + /* I don't know if it is really 2, but it it is + * less than 3 anyway */ + .sabi_version = 2, + .test_string = "SECLINUX", .main_function = 0x4c49, @@ -146,6 +185,17 @@ static const struct sabi_config sabi_configs[] = { .get_performance_level = 0x08, .set_performance_level = 0x09, + .get_battery_life_extender = 0xFFFF, + .set_battery_life_extender = 0xFFFF, + + .get_usb_charge = 0xFFFF, + .set_usb_charge = 0xFFFF, + + .get_wireless_status = 0xFFFF, + .set_wireless_status = 0xFFFF, + + .kbd_backlight = 0xFFFF, + .set_linux = 0x0a, }, @@ -164,6 +214,8 @@ static const struct sabi_config sabi_configs[] = { .max_brightness = 8, }, { + .sabi_version = 3, + .test_string = "SwSmi@", .main_function = 0x5843, @@ -193,6 +245,17 @@ static const struct sabi_config sabi_configs[] = { .get_performance_level = 0x31, .set_performance_level = 0x32, + .get_battery_life_extender = 0x65, + .set_battery_life_extender = 0x66, + + .get_usb_charge = 0x67, + .set_usb_charge = 0x68, + + .get_wireless_status = 0x69, + .set_wireless_status = 0x6a, + + .kbd_backlight = 0x78, + .set_linux = 0xff, }, @@ -217,16 +280,82 @@ static const struct sabi_config sabi_configs[] = { { }, }; -static const struct sabi_config *sabi_config; +/* + * samsung-laptop/ - debugfs root directory + * f0000_segment - dump f0000 segment + * command - current command + * data - current data + * d0, d1, d2, d3 - data fields + * call - call SABI using command and data + * + * This allow to call arbitrary sabi commands wihout + * modifying the driver at all. + * For example, setting the keyboard backlight brightness to 5 + * + * echo 0x78 > command + * echo 0x0582 > d0 + * echo 0 > d1 + * echo 0 > d2 + * echo 0 > d3 + * cat call + */ + +struct samsung_laptop_debug { + struct dentry *root; + struct sabi_data data; + u16 command; + + struct debugfs_blob_wrapper f0000_wrapper; + struct debugfs_blob_wrapper data_wrapper; + struct debugfs_blob_wrapper sdiag_wrapper; +}; + +struct samsung_laptop; + +struct samsung_rfkill { + struct samsung_laptop *samsung; + struct rfkill *rfkill; + enum rfkill_type type; +}; + +struct samsung_laptop { + const struct sabi_config *config; + + void __iomem *sabi; + void __iomem *sabi_iface; + void __iomem *f0000_segment; + + struct mutex sabi_mutex; + + struct platform_device *platform_device; + struct backlight_device *backlight_device; + + struct samsung_rfkill wlan; + struct samsung_rfkill bluetooth; + + struct led_classdev kbd_led; + int kbd_led_wk; + struct workqueue_struct *led_workqueue; + struct work_struct kbd_led_work; + + struct samsung_laptop_debug debug; + struct samsung_quirks *quirks; + + bool handle_backlight; + bool has_stepping_quirk; + + char sdiag[64]; +}; + +struct samsung_quirks { + bool broken_acpi_video; +}; + +static struct samsung_quirks samsung_unknown = {}; -static void __iomem *sabi; -static void __iomem *sabi_iface; -static void __iomem *f0000_segment; -static struct backlight_device *backlight_device; -static struct mutex sabi_mutex; -static struct platform_device *sdev; -static struct rfkill *rfk; -static bool has_stepping_quirk; +static struct samsung_quirks samsung_broken_acpi_video = { + .broken_acpi_video = true, +}; static bool force; module_param(force, bool, 0); @@ -237,176 +366,143 @@ static bool debug; module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); -static int sabi_get_command(u8 command, struct sabi_retval *sretval) +static int sabi_command(struct samsung_laptop *samsung, u16 command, + struct sabi_data *in, + struct sabi_data *out) { - int retval = 0; - u16 port = readw(sabi + sabi_config->header_offsets.port); + const struct sabi_config *config = samsung->config; + int ret = 0; + u16 port = readw(samsung->sabi + config->header_offsets.port); u8 complete, iface_data; - mutex_lock(&sabi_mutex); - - /* enable memory to be able to write to it */ - outb(readb(sabi + sabi_config->header_offsets.en_mem), port); - - /* write out the command */ - writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN); - writew(command, sabi_iface + SABI_IFACE_SUB); - writeb(0, sabi_iface + SABI_IFACE_COMPLETE); - outb(readb(sabi + sabi_config->header_offsets.iface_func), port); - - /* write protect memory to make it safe */ - outb(readb(sabi + sabi_config->header_offsets.re_mem), port); + mutex_lock(&samsung->sabi_mutex); - /* see if the command actually succeeded */ - complete = readb(sabi_iface + SABI_IFACE_COMPLETE); - iface_data = readb(sabi_iface + SABI_IFACE_DATA); - if (complete != 0xaa || iface_data == 0xff) { - pr_warn("SABI get command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n", - command, complete, iface_data); - retval = -EINVAL; - goto exit; + if (debug) { + if (in) + pr_info("SABI command:0x%04x " + "data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}", + command, in->d0, in->d1, in->d2, in->d3); + else + pr_info("SABI command:0x%04x", command); } - /* - * Save off the data into a structure so the caller use it. - * Right now we only want the first 4 bytes, - * There are commands that need more, but not for the ones we - * currently care about. - */ - sretval->retval[0] = readb(sabi_iface + SABI_IFACE_DATA); - sretval->retval[1] = readb(sabi_iface + SABI_IFACE_DATA + 1); - sretval->retval[2] = readb(sabi_iface + SABI_IFACE_DATA + 2); - sretval->retval[3] = readb(sabi_iface + SABI_IFACE_DATA + 3); - -exit: - mutex_unlock(&sabi_mutex); - return retval; - -} - -static int sabi_set_command(u8 command, u8 data) -{ - int retval = 0; - u16 port = readw(sabi + sabi_config->header_offsets.port); - u8 complete, iface_data; - - mutex_lock(&sabi_mutex); /* enable memory to be able to write to it */ - outb(readb(sabi + sabi_config->header_offsets.en_mem), port); + outb(readb(samsung->sabi + config->header_offsets.en_mem), port); /* write out the command */ - writew(sabi_config->main_function, sabi_iface + SABI_IFACE_MAIN); - writew(command, sabi_iface + SABI_IFACE_SUB); - writeb(0, sabi_iface + SABI_IFACE_COMPLETE); - writeb(data, sabi_iface + SABI_IFACE_DATA); - outb(readb(sabi + sabi_config->header_offsets.iface_func), port); + writew(config->main_function, samsung->sabi_iface + SABI_IFACE_MAIN); + writew(command, samsung->sabi_iface + SABI_IFACE_SUB); + writeb(0, samsung->sabi_iface + SABI_IFACE_COMPLETE); + if (in) { + writel(in->d0, samsung->sabi_iface + SABI_IFACE_DATA); + writel(in->d1, samsung->sabi_iface + SABI_IFACE_DATA + 4); + writew(in->d2, samsung->sabi_iface + SABI_IFACE_DATA + 8); + writeb(in->d3, samsung->sabi_iface + SABI_IFACE_DATA + 10); + } + outb(readb(samsung->sabi + config->header_offsets.iface_func), port); /* write protect memory to make it safe */ - outb(readb(sabi + sabi_config->header_offsets.re_mem), port); + outb(readb(samsung->sabi + config->header_offsets.re_mem), port); /* see if the command actually succeeded */ - complete = readb(sabi_iface + SABI_IFACE_COMPLETE); - iface_data = readb(sabi_iface + SABI_IFACE_DATA); + complete = readb(samsung->sabi_iface + SABI_IFACE_COMPLETE); + iface_data = readb(samsung->sabi_iface + SABI_IFACE_DATA); + + /* iface_data = 0xFF happens when a command is not known + * so we only add a warning in debug mode since we will + * probably issue some unknown command at startup to find + * out which features are supported */ + if (complete != 0xaa || (iface_data == 0xff && debug)) + pr_warn("SABI command 0x%04x failed with" + " completion flag 0x%02x and interface data 0x%02x", + command, complete, iface_data); + if (complete != 0xaa || iface_data == 0xff) { - pr_warn("SABI set command 0x%02x failed with completion flag 0x%02x and data 0x%02x\n", - command, complete, iface_data); - retval = -EINVAL; + ret = -EINVAL; + goto exit; } - mutex_unlock(&sabi_mutex); - return retval; -} - -static void test_backlight(void) -{ - struct sabi_retval sretval; - - sabi_get_command(sabi_config->commands.get_backlight, &sretval); - printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); - - sabi_set_command(sabi_config->commands.set_backlight, 0); - printk(KERN_DEBUG "backlight should be off\n"); - - sabi_get_command(sabi_config->commands.get_backlight, &sretval); - printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); - - msleep(1000); + if (out) { + out->d0 = readl(samsung->sabi_iface + SABI_IFACE_DATA); + out->d1 = readl(samsung->sabi_iface + SABI_IFACE_DATA + 4); + out->d2 = readw(samsung->sabi_iface + SABI_IFACE_DATA + 2); + out->d3 = readb(samsung->sabi_iface + SABI_IFACE_DATA + 1); + } - sabi_set_command(sabi_config->commands.set_backlight, 1); - printk(KERN_DEBUG "backlight should be on\n"); + if (debug && out) { + pr_info("SABI return data:{0x%08x, 0x%08x, 0x%04x, 0x%02x}", + out->d0, out->d1, out->d2, out->d3); + } - sabi_get_command(sabi_config->commands.get_backlight, &sretval); - printk(KERN_DEBUG "backlight = 0x%02x\n", sretval.retval[0]); +exit: + mutex_unlock(&samsung->sabi_mutex); + return ret; } -static void test_wireless(void) +/* simple wrappers usable with most commands */ +static int sabi_set_commandb(struct samsung_laptop *samsung, + u16 command, u8 data) { - struct sabi_retval sretval; - - sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); - printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); - - sabi_set_command(sabi_config->commands.set_wireless_button, 0); - printk(KERN_DEBUG "wireless led should be off\n"); - - sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); - printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); + struct sabi_data in = { { { .d0 = 0, .d1 = 0, .d2 = 0, .d3 = 0 } } }; - msleep(1000); - - sabi_set_command(sabi_config->commands.set_wireless_button, 1); - printk(KERN_DEBUG "wireless led should be on\n"); - - sabi_get_command(sabi_config->commands.get_wireless_button, &sretval); - printk(KERN_DEBUG "wireless led = 0x%02x\n", sretval.retval[0]); + in.data[0] = data; + return sabi_command(samsung, command, &in, NULL); } -static u8 read_brightness(void) +static int read_brightness(struct samsung_laptop *samsung) { - struct sabi_retval sretval; + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data sretval; int user_brightness = 0; int retval; - retval = sabi_get_command(sabi_config->commands.get_brightness, - &sretval); - if (!retval) { - user_brightness = sretval.retval[0]; - if (user_brightness > sabi_config->min_brightness) - user_brightness -= sabi_config->min_brightness; - else - user_brightness = 0; - } + retval = sabi_command(samsung, commands->get_brightness, + NULL, &sretval); + if (retval) + return retval; + + user_brightness = sretval.data[0]; + if (user_brightness > config->min_brightness) + user_brightness -= config->min_brightness; + else + user_brightness = 0; + return user_brightness; } -static void set_brightness(u8 user_brightness) +static void set_brightness(struct samsung_laptop *samsung, u8 user_brightness) { - u8 user_level = user_brightness + sabi_config->min_brightness; + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &samsung->config->commands; + u8 user_level = user_brightness + config->min_brightness; - if (has_stepping_quirk && user_level != 0) { + if (samsung->has_stepping_quirk && user_level != 0) { /* * short circuit if the specified level is what's already set * to prevent the screen from flickering needlessly */ - if (user_brightness == read_brightness()) + if (user_brightness == read_brightness(samsung)) return; - sabi_set_command(sabi_config->commands.set_brightness, 0); + sabi_set_commandb(samsung, commands->set_brightness, 0); } - sabi_set_command(sabi_config->commands.set_brightness, user_level); + sabi_set_commandb(samsung, commands->set_brightness, user_level); } static int get_brightness(struct backlight_device *bd) { - return (int)read_brightness(); + struct samsung_laptop *samsung = bl_get_data(bd); + + return read_brightness(samsung); } -static void check_for_stepping_quirk(void) +static void check_for_stepping_quirk(struct samsung_laptop *samsung) { - u8 initial_level; - u8 check_level; - u8 orig_level = read_brightness(); + int initial_level; + int check_level; + int orig_level = read_brightness(samsung); /* * Some laptops exhibit the strange behaviour of stepping toward @@ -416,34 +512,38 @@ static void check_for_stepping_quirk(void) */ if (orig_level == 0) - set_brightness(1); + set_brightness(samsung, 1); - initial_level = read_brightness(); + initial_level = read_brightness(samsung); if (initial_level <= 2) check_level = initial_level + 2; else check_level = initial_level - 2; - has_stepping_quirk = false; - set_brightness(check_level); + samsung->has_stepping_quirk = false; + set_brightness(samsung, check_level); - if (read_brightness() != check_level) { - has_stepping_quirk = true; + if (read_brightness(samsung) != check_level) { + samsung->has_stepping_quirk = true; pr_info("enabled workaround for brightness stepping quirk\n"); } - set_brightness(orig_level); + set_brightness(samsung, orig_level); } static int update_status(struct backlight_device *bd) { - set_brightness(bd->props.brightness); + struct samsung_laptop *samsung = bl_get_data(bd); + const struct sabi_commands *commands = &samsung->config->commands; + + set_brightness(samsung, bd->props.brightness); if (bd->props.power == FB_BLANK_UNBLANK) - sabi_set_command(sabi_config->commands.set_backlight, 1); + sabi_set_commandb(samsung, commands->set_backlight, 1); else - sabi_set_command(sabi_config->commands.set_backlight, 0); + sabi_set_commandb(samsung, commands->set_backlight, 0); + return 0; } @@ -452,66 +552,101 @@ static const struct backlight_ops backlight_ops = { .update_status = update_status, }; -static int rfkill_set(void *data, bool blocked) +static int seclinux_rfkill_set(void *data, bool blocked) { - /* Do something with blocked...*/ - /* - * blocked == false is on - * blocked == true is off - */ - if (blocked) - sabi_set_command(sabi_config->commands.set_wireless_button, 0); - else - sabi_set_command(sabi_config->commands.set_wireless_button, 1); + struct samsung_rfkill *srfkill = data; + struct samsung_laptop *samsung = srfkill->samsung; + const struct sabi_commands *commands = &samsung->config->commands; - return 0; + return sabi_set_commandb(samsung, commands->set_wireless_button, + !blocked); } -static struct rfkill_ops rfkill_ops = { - .set_block = rfkill_set, +static struct rfkill_ops seclinux_rfkill_ops = { + .set_block = seclinux_rfkill_set, }; -static int init_wireless(struct platform_device *sdev) +static int swsmi_wireless_status(struct samsung_laptop *samsung, + struct sabi_data *data) { - int retval; + const struct sabi_commands *commands = &samsung->config->commands; - rfk = rfkill_alloc("samsung-wifi", &sdev->dev, RFKILL_TYPE_WLAN, - &rfkill_ops, NULL); - if (!rfk) - return -ENOMEM; - - retval = rfkill_register(rfk); - if (retval) { - rfkill_destroy(rfk); - return -ENODEV; - } + return sabi_command(samsung, commands->get_wireless_status, + NULL, data); +} - return 0; +static int swsmi_rfkill_set(void *priv, bool blocked) +{ + struct samsung_rfkill *srfkill = priv; + struct samsung_laptop *samsung = srfkill->samsung; + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int ret, i; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) + return ret; + + /* Don't set the state for non-present devices */ + for (i = 0; i < 4; i++) + if (data.data[i] == 0x02) + data.data[1] = 0; + + if (srfkill->type == RFKILL_TYPE_WLAN) + data.data[WL_STATUS_WLAN] = !blocked; + else if (srfkill->type == RFKILL_TYPE_BLUETOOTH) + data.data[WL_STATUS_BT] = !blocked; + + return sabi_command(samsung, commands->set_wireless_status, + &data, &data); } -static void destroy_wireless(void) +static void swsmi_rfkill_query(struct rfkill *rfkill, void *priv) { - rfkill_unregister(rfk); - rfkill_destroy(rfk); + struct samsung_rfkill *srfkill = priv; + struct samsung_laptop *samsung = srfkill->samsung; + struct sabi_data data; + int ret; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) + return ; + + if (srfkill->type == RFKILL_TYPE_WLAN) + ret = data.data[WL_STATUS_WLAN]; + else if (srfkill->type == RFKILL_TYPE_BLUETOOTH) + ret = data.data[WL_STATUS_BT]; + else + return ; + + rfkill_set_sw_state(rfkill, !ret); } +static struct rfkill_ops swsmi_rfkill_ops = { + .set_block = swsmi_rfkill_set, + .query = swsmi_rfkill_query, +}; + static ssize_t get_performance_level(struct device *dev, struct device_attribute *attr, char *buf) { - struct sabi_retval sretval; + struct samsung_laptop *samsung = dev_get_drvdata(dev); + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &config->commands; + struct sabi_data sretval; int retval; int i; /* Read the state */ - retval = sabi_get_command(sabi_config->commands.get_performance_level, - &sretval); + retval = sabi_command(samsung, commands->get_performance_level, + NULL, &sretval); if (retval) return retval; /* The logic is backwards, yeah, lots of fun... */ - for (i = 0; sabi_config->performance_levels[i].name; ++i) { - if (sretval.retval[0] == sabi_config->performance_levels[i].value) - return sprintf(buf, "%s\n", sabi_config->performance_levels[i].name); + for (i = 0; config->performance_levels[i].name; ++i) { + if (sretval.data[0] == config->performance_levels[i].value) + return sprintf(buf, "%s\n", config->performance_levels[i].name); } return sprintf(buf, "%s\n", "unknown"); } @@ -520,269 +655,178 @@ static ssize_t set_performance_level(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - if (count >= 1) { - int i; - for (i = 0; sabi_config->performance_levels[i].name; ++i) { - const struct sabi_performance_level *level = - &sabi_config->performance_levels[i]; - if (!strncasecmp(level->name, buf, strlen(level->name))) { - sabi_set_command(sabi_config->commands.set_performance_level, - level->value); - break; - } + struct samsung_laptop *samsung = dev_get_drvdata(dev); + const struct sabi_config *config = samsung->config; + const struct sabi_commands *commands = &config->commands; + int i; + + if (count < 1) + return count; + + for (i = 0; config->performance_levels[i].name; ++i) { + const struct sabi_performance_level *level = + &config->performance_levels[i]; + if (!strncasecmp(level->name, buf, strlen(level->name))) { + sabi_set_commandb(samsung, + commands->set_performance_level, + level->value); + break; } - if (!sabi_config->performance_levels[i].name) - return -EINVAL; } + + if (!config->performance_levels[i].name) + return -EINVAL; + return count; } + static DEVICE_ATTR(performance_level, S_IWUSR | S_IRUGO, get_performance_level, set_performance_level); +static int read_battery_life_extender(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + if (commands->get_battery_life_extender == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80; + retval = sabi_command(samsung, commands->get_battery_life_extender, + &data, &data); -static int __init dmi_check_cb(const struct dmi_system_id *id) + if (retval) + return retval; + + if (data.data[0] != 0 && data.data[0] != 1) + return -ENODEV; + + return data.data[0]; +} + +static int write_battery_life_extender(struct samsung_laptop *samsung, + int enabled) { - pr_info("found laptop model '%s'\n", - id->ident); - return 1; + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80 | enabled; + return sabi_command(samsung, commands->set_battery_life_extender, + &data, NULL); } -static struct dmi_system_id __initdata samsung_dmi_table[] = { - { - .ident = "N128", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N128"), - DMI_MATCH(DMI_BOARD_NAME, "N128"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N130", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N130"), - DMI_MATCH(DMI_BOARD_NAME, "N130"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N510", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N510"), - DMI_MATCH(DMI_BOARD_NAME, "N510"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "X125", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X125"), - DMI_MATCH(DMI_BOARD_NAME, "X125"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "X120/X170", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X120/X170"), - DMI_MATCH(DMI_BOARD_NAME, "X120/X170"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "NC10", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), - DMI_MATCH(DMI_BOARD_NAME, "NC10"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "NP-Q45", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), - DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "X360", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X360"), - DMI_MATCH(DMI_BOARD_NAME, "X360"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R410 Plus", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R410P"), - DMI_MATCH(DMI_BOARD_NAME, "R460"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R518", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R518"), - DMI_MATCH(DMI_BOARD_NAME, "R518"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R519/R719", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R519/R719"), - DMI_MATCH(DMI_BOARD_NAME, "R519/R719"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N150/N210/N220", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"), - DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N220", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N220"), - DMI_MATCH(DMI_BOARD_NAME, "N220"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N150/N210/N220/N230", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220/N230"), - DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220/N230"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N150P/N210P/N220P", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N150P/N210P/N220P"), - DMI_MATCH(DMI_BOARD_NAME, "N150P/N210P/N220P"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R700", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "SR700"), - DMI_MATCH(DMI_BOARD_NAME, "SR700"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R530/R730", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R530/R730"), - DMI_MATCH(DMI_BOARD_NAME, "R530/R730"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "NF110/NF210/NF310", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"), - DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "N145P/N250P/N260P", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"), - DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R70/R71", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, - "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R70/R71"), - DMI_MATCH(DMI_BOARD_NAME, "R70/R71"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "P460", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "P460"), - DMI_MATCH(DMI_BOARD_NAME, "P460"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "R528/R728", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "R528/R728"), - DMI_MATCH(DMI_BOARD_NAME, "R528/R728"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "NC210/NC110", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"), - DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"), - }, - .callback = dmi_check_cb, - }, - { - .ident = "X520", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "X520"), - DMI_MATCH(DMI_BOARD_NAME, "X520"), - }, - .callback = dmi_check_cb, - }, - { }, +static ssize_t get_battery_life_extender(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret; + + ret = read_battery_life_extender(samsung); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t set_battery_life_extender(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret, value; + + if (!count || sscanf(buf, "%i", &value) != 1) + return -EINVAL; + + ret = write_battery_life_extender(samsung, !!value); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(battery_life_extender, S_IWUSR | S_IRUGO, + get_battery_life_extender, set_battery_life_extender); + +static int read_usb_charge(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + if (commands->get_usb_charge == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80; + retval = sabi_command(samsung, commands->get_usb_charge, + &data, &data); + + if (retval) + return retval; + + if (data.data[0] != 0 && data.data[0] != 1) + return -ENODEV; + + return data.data[0]; +} + +static int write_usb_charge(struct samsung_laptop *samsung, + int enabled) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x80 | enabled; + return sabi_command(samsung, commands->set_usb_charge, + &data, NULL); +} + +static ssize_t get_usb_charge(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret; + + ret = read_usb_charge(samsung); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t set_usb_charge(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct samsung_laptop *samsung = dev_get_drvdata(dev); + int ret, value; + + if (!count || sscanf(buf, "%i", &value) != 1) + return -EINVAL; + + ret = write_usb_charge(samsung, !!value); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(usb_charge, S_IWUSR | S_IRUGO, + get_usb_charge, set_usb_charge); + +static struct attribute *platform_attributes[] = { + &dev_attr_performance_level.attr, + &dev_attr_battery_life_extender.attr, + &dev_attr_usb_charge.attr, + NULL }; -MODULE_DEVICE_TABLE(dmi, samsung_dmi_table); static int find_signature(void __iomem *memcheck, const char *testStr) { @@ -803,153 +847,772 @@ static int find_signature(void __iomem *memcheck, const char *testStr) return loca; } -static int __init samsung_init(void) +static void samsung_rfkill_exit(struct samsung_laptop *samsung) { - struct backlight_properties props; - struct sabi_retval sretval; - unsigned int ifaceP; - int i; - int loca; + if (samsung->wlan.rfkill) { + rfkill_unregister(samsung->wlan.rfkill); + rfkill_destroy(samsung->wlan.rfkill); + samsung->wlan.rfkill = NULL; + } + if (samsung->bluetooth.rfkill) { + rfkill_unregister(samsung->bluetooth.rfkill); + rfkill_destroy(samsung->bluetooth.rfkill); + samsung->bluetooth.rfkill = NULL; + } +} + +static int samsung_new_rfkill(struct samsung_laptop *samsung, + struct samsung_rfkill *arfkill, + const char *name, enum rfkill_type type, + const struct rfkill_ops *ops, + int blocked) +{ + struct rfkill **rfkill = &arfkill->rfkill; + int ret; + + arfkill->type = type; + arfkill->samsung = samsung; + + *rfkill = rfkill_alloc(name, &samsung->platform_device->dev, + type, ops, arfkill); + + if (!*rfkill) + return -EINVAL; + + if (blocked != -1) + rfkill_init_sw_state(*rfkill, blocked); + + ret = rfkill_register(*rfkill); + if (ret) { + rfkill_destroy(*rfkill); + *rfkill = NULL; + return ret; + } + return 0; +} + +static int __init samsung_rfkill_init_seclinux(struct samsung_laptop *samsung) +{ + return samsung_new_rfkill(samsung, &samsung->wlan, "samsung-wlan", + RFKILL_TYPE_WLAN, &seclinux_rfkill_ops, -1); +} + +static int __init samsung_rfkill_init_swsmi(struct samsung_laptop *samsung) +{ + struct sabi_data data; + int ret; + + ret = swsmi_wireless_status(samsung, &data); + if (ret) { + /* Some swsmi laptops use the old seclinux way to control + * wireless devices */ + if (ret == -EINVAL) + ret = samsung_rfkill_init_seclinux(samsung); + return ret; + } + + /* 0x02 seems to mean that the device is no present/available */ + + if (data.data[WL_STATUS_WLAN] != 0x02) + ret = samsung_new_rfkill(samsung, &samsung->wlan, + "samsung-wlan", + RFKILL_TYPE_WLAN, + &swsmi_rfkill_ops, + !data.data[WL_STATUS_WLAN]); + if (ret) + goto exit; + + if (data.data[WL_STATUS_BT] != 0x02) + ret = samsung_new_rfkill(samsung, &samsung->bluetooth, + "samsung-bluetooth", + RFKILL_TYPE_BLUETOOTH, + &swsmi_rfkill_ops, + !data.data[WL_STATUS_BT]); + if (ret) + goto exit; + +exit: + if (ret) + samsung_rfkill_exit(samsung); + + return ret; +} + +static int __init samsung_rfkill_init(struct samsung_laptop *samsung) +{ + if (samsung->config->sabi_version == 2) + return samsung_rfkill_init_seclinux(samsung); + if (samsung->config->sabi_version == 3) + return samsung_rfkill_init_swsmi(samsung); + return 0; +} + +static int kbd_backlight_enable(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; int retval; - mutex_init(&sabi_mutex); + if (commands->kbd_backlight == 0xFFFF) + return -ENODEV; + + memset(&data, 0, sizeof(data)); + data.d0 = 0xaabb; + retval = sabi_command(samsung, commands->kbd_backlight, + &data, &data); - if (!force && !dmi_check_system(samsung_dmi_table)) + if (retval) + return retval; + + if (data.d0 != 0xccdd) return -ENODEV; + return 0; +} - f0000_segment = ioremap_nocache(0xf0000, 0xffff); - if (!f0000_segment) { - pr_err("Can't map the segment at 0xf0000\n"); - return -EINVAL; +static int kbd_backlight_read(struct samsung_laptop *samsung) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + int retval; + + memset(&data, 0, sizeof(data)); + data.data[0] = 0x81; + retval = sabi_command(samsung, commands->kbd_backlight, + &data, &data); + + if (retval) + return retval; + + return data.data[0]; +} + +static int kbd_backlight_write(struct samsung_laptop *samsung, int brightness) +{ + const struct sabi_commands *commands = &samsung->config->commands; + struct sabi_data data; + + memset(&data, 0, sizeof(data)); + data.d0 = 0x82 | ((brightness & 0xFF) << 8); + return sabi_command(samsung, commands->kbd_backlight, + &data, NULL); +} + +static void kbd_led_update(struct work_struct *work) +{ + struct samsung_laptop *samsung; + + samsung = container_of(work, struct samsung_laptop, kbd_led_work); + kbd_backlight_write(samsung, samsung->kbd_led_wk); +} + +static void kbd_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct samsung_laptop *samsung; + + samsung = container_of(led_cdev, struct samsung_laptop, kbd_led); + + if (value > samsung->kbd_led.max_brightness) + value = samsung->kbd_led.max_brightness; + else if (value < 0) + value = 0; + + samsung->kbd_led_wk = value; + queue_work(samsung->led_workqueue, &samsung->kbd_led_work); +} + +static enum led_brightness kbd_led_get(struct led_classdev *led_cdev) +{ + struct samsung_laptop *samsung; + + samsung = container_of(led_cdev, struct samsung_laptop, kbd_led); + return kbd_backlight_read(samsung); +} + +static void samsung_leds_exit(struct samsung_laptop *samsung) +{ + if (!IS_ERR_OR_NULL(samsung->kbd_led.dev)) + led_classdev_unregister(&samsung->kbd_led); + if (samsung->led_workqueue) + destroy_workqueue(samsung->led_workqueue); +} + +static int __init samsung_leds_init(struct samsung_laptop *samsung) +{ + int ret = 0; + + samsung->led_workqueue = create_singlethread_workqueue("led_workqueue"); + if (!samsung->led_workqueue) + return -ENOMEM; + + if (kbd_backlight_enable(samsung) >= 0) { + INIT_WORK(&samsung->kbd_led_work, kbd_led_update); + + samsung->kbd_led.name = "samsung::kbd_backlight"; + samsung->kbd_led.brightness_set = kbd_led_set; + samsung->kbd_led.brightness_get = kbd_led_get; + samsung->kbd_led.max_brightness = 8; + + ret = led_classdev_register(&samsung->platform_device->dev, + &samsung->kbd_led); + } + + if (ret) + samsung_leds_exit(samsung); + + return ret; +} + +static void samsung_backlight_exit(struct samsung_laptop *samsung) +{ + if (samsung->backlight_device) { + backlight_device_unregister(samsung->backlight_device); + samsung->backlight_device = NULL; + } +} + +static int __init samsung_backlight_init(struct samsung_laptop *samsung) +{ + struct backlight_device *bd; + struct backlight_properties props; + + if (!samsung->handle_backlight) + return 0; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = samsung->config->max_brightness - + samsung->config->min_brightness; + + bd = backlight_device_register("samsung", + &samsung->platform_device->dev, + samsung, &backlight_ops, + &props); + if (IS_ERR(bd)) + return PTR_ERR(bd); + + samsung->backlight_device = bd; + samsung->backlight_device->props.brightness = read_brightness(samsung); + samsung->backlight_device->props.power = FB_BLANK_UNBLANK; + backlight_update_status(samsung->backlight_device); + + return 0; +} + +static umode_t samsung_sysfs_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct platform_device *pdev = to_platform_device(dev); + struct samsung_laptop *samsung = platform_get_drvdata(pdev); + bool ok = true; + + if (attr == &dev_attr_performance_level.attr) + ok = !!samsung->config->performance_levels[0].name; + if (attr == &dev_attr_battery_life_extender.attr) + ok = !!(read_battery_life_extender(samsung) >= 0); + if (attr == &dev_attr_usb_charge.attr) + ok = !!(read_usb_charge(samsung) >= 0); + + return ok ? attr->mode : 0; +} + +static struct attribute_group platform_attribute_group = { + .is_visible = samsung_sysfs_is_visible, + .attrs = platform_attributes +}; + +static void samsung_sysfs_exit(struct samsung_laptop *samsung) +{ + struct platform_device *device = samsung->platform_device; + + sysfs_remove_group(&device->dev.kobj, &platform_attribute_group); +} + +static int __init samsung_sysfs_init(struct samsung_laptop *samsung) +{ + struct platform_device *device = samsung->platform_device; + + return sysfs_create_group(&device->dev.kobj, &platform_attribute_group); + +} + +static int show_call(struct seq_file *m, void *data) +{ + struct samsung_laptop *samsung = m->private; + struct sabi_data *sdata = &samsung->debug.data; + int ret; + + seq_printf(m, "SABI 0x%04x {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n", + samsung->debug.command, + sdata->d0, sdata->d1, sdata->d2, sdata->d3); + + ret = sabi_command(samsung, samsung->debug.command, sdata, sdata); + + if (ret) { + seq_printf(m, "SABI command 0x%04x failed\n", + samsung->debug.command); + return ret; + } + + seq_printf(m, "SABI {0x%08x, 0x%08x, 0x%04x, 0x%02x}\n", + sdata->d0, sdata->d1, sdata->d2, sdata->d3); + return 0; +} + +static int samsung_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_call, inode->i_private); +} + +static const struct file_operations samsung_laptop_call_io_ops = { + .owner = THIS_MODULE, + .open = samsung_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void samsung_debugfs_exit(struct samsung_laptop *samsung) +{ + debugfs_remove_recursive(samsung->debug.root); +} + +static int samsung_debugfs_init(struct samsung_laptop *samsung) +{ + struct dentry *dent; + + samsung->debug.root = debugfs_create_dir("samsung-laptop", NULL); + if (!samsung->debug.root) { + pr_err("failed to create debugfs directory"); + goto error_debugfs; + } + + samsung->debug.f0000_wrapper.data = samsung->f0000_segment; + samsung->debug.f0000_wrapper.size = 0xffff; + + samsung->debug.data_wrapper.data = &samsung->debug.data; + samsung->debug.data_wrapper.size = sizeof(samsung->debug.data); + + samsung->debug.sdiag_wrapper.data = samsung->sdiag; + samsung->debug.sdiag_wrapper.size = strlen(samsung->sdiag); + + dent = debugfs_create_u16("command", S_IRUGO | S_IWUSR, + samsung->debug.root, &samsung->debug.command); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_u32("d0", S_IRUGO | S_IWUSR, samsung->debug.root, + &samsung->debug.data.d0); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_u32("d1", S_IRUGO | S_IWUSR, samsung->debug.root, + &samsung->debug.data.d1); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_u16("d2", S_IRUGO | S_IWUSR, samsung->debug.root, + &samsung->debug.data.d2); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_u8("d3", S_IRUGO | S_IWUSR, samsung->debug.root, + &samsung->debug.data.d3); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_blob("data", S_IRUGO | S_IWUSR, + samsung->debug.root, + &samsung->debug.data_wrapper); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_blob("f0000_segment", S_IRUSR | S_IWUSR, + samsung->debug.root, + &samsung->debug.f0000_wrapper); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_file("call", S_IFREG | S_IRUGO, + samsung->debug.root, samsung, + &samsung_laptop_call_io_ops); + if (!dent) + goto error_debugfs; + + dent = debugfs_create_blob("sdiag", S_IRUGO | S_IWUSR, + samsung->debug.root, + &samsung->debug.sdiag_wrapper); + if (!dent) + goto error_debugfs; + + return 0; + +error_debugfs: + samsung_debugfs_exit(samsung); + return -ENOMEM; +} + +static void samsung_sabi_exit(struct samsung_laptop *samsung) +{ + const struct sabi_config *config = samsung->config; + + /* Turn off "Linux" mode in the BIOS */ + if (config && config->commands.set_linux != 0xff) + sabi_set_commandb(samsung, config->commands.set_linux, 0x80); + + if (samsung->sabi_iface) { + iounmap(samsung->sabi_iface); + samsung->sabi_iface = NULL; + } + if (samsung->f0000_segment) { + iounmap(samsung->f0000_segment); + samsung->f0000_segment = NULL; + } + + samsung->config = NULL; +} + +static __init void samsung_sabi_infos(struct samsung_laptop *samsung, int loca, + unsigned int ifaceP) +{ + const struct sabi_config *config = samsung->config; + + printk(KERN_DEBUG "This computer supports SABI==%x\n", + loca + 0xf0000 - 6); + + printk(KERN_DEBUG "SABI header:\n"); + printk(KERN_DEBUG " SMI Port Number = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.port)); + printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.iface_func)); + printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.en_mem)); + printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n", + readb(samsung->sabi + config->header_offsets.re_mem)); + printk(KERN_DEBUG " SABI data offset = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.data_offset)); + printk(KERN_DEBUG " SABI data segment = 0x%04x\n", + readw(samsung->sabi + config->header_offsets.data_segment)); + + printk(KERN_DEBUG " SABI pointer = 0x%08x\n", ifaceP); +} + +static void __init samsung_sabi_diag(struct samsung_laptop *samsung) +{ + int loca = find_signature(samsung->f0000_segment, "SDiaG@"); + int i; + + if (loca == 0xffff) + return ; + + /* Example: + * Ident: @SDiaG@686XX-N90X3A/966-SEC-07HL-S90X3A + * + * Product name: 90X3A + * BIOS Version: 07HL + */ + loca += 1; + for (i = 0; loca < 0xffff && i < sizeof(samsung->sdiag) - 1; loca++) { + char temp = readb(samsung->f0000_segment + loca); + + if (isalnum(temp) || temp == '/' || temp == '-') + samsung->sdiag[i++] = temp; + else + break ; } + if (debug && samsung->sdiag[0]) + pr_info("sdiag: %s", samsung->sdiag); +} + +static int __init samsung_sabi_init(struct samsung_laptop *samsung) +{ + const struct sabi_config *config = NULL; + const struct sabi_commands *commands; + unsigned int ifaceP; + int ret = 0; + int i; + int loca; + + samsung->f0000_segment = ioremap_nocache(0xf0000, 0xffff); + if (!samsung->f0000_segment) { + if (debug || force) + pr_err("Can't map the segment at 0xf0000\n"); + ret = -EINVAL; + goto exit; + } + + samsung_sabi_diag(samsung); + /* Try to find one of the signatures in memory to find the header */ for (i = 0; sabi_configs[i].test_string != 0; ++i) { - sabi_config = &sabi_configs[i]; - loca = find_signature(f0000_segment, sabi_config->test_string); + samsung->config = &sabi_configs[i]; + loca = find_signature(samsung->f0000_segment, + samsung->config->test_string); if (loca != 0xffff) break; } if (loca == 0xffff) { - pr_err("This computer does not support SABI\n"); - goto error_no_signature; + if (debug || force) + pr_err("This computer does not support SABI\n"); + ret = -ENODEV; + goto exit; } + config = samsung->config; + commands = &config->commands; + /* point to the SMI port Number */ loca += 1; - sabi = (f0000_segment + loca); - - if (debug) { - printk(KERN_DEBUG "This computer supports SABI==%x\n", - loca + 0xf0000 - 6); - printk(KERN_DEBUG "SABI header:\n"); - printk(KERN_DEBUG " SMI Port Number = 0x%04x\n", - readw(sabi + sabi_config->header_offsets.port)); - printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n", - readb(sabi + sabi_config->header_offsets.iface_func)); - printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n", - readb(sabi + sabi_config->header_offsets.en_mem)); - printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n", - readb(sabi + sabi_config->header_offsets.re_mem)); - printk(KERN_DEBUG " SABI data offset = 0x%04x\n", - readw(sabi + sabi_config->header_offsets.data_offset)); - printk(KERN_DEBUG " SABI data segment = 0x%04x\n", - readw(sabi + sabi_config->header_offsets.data_segment)); - } + samsung->sabi = (samsung->f0000_segment + loca); /* Get a pointer to the SABI Interface */ - ifaceP = (readw(sabi + sabi_config->header_offsets.data_segment) & 0x0ffff) << 4; - ifaceP += readw(sabi + sabi_config->header_offsets.data_offset) & 0x0ffff; - sabi_iface = ioremap_nocache(ifaceP, 16); - if (!sabi_iface) { - pr_err("Can't remap %x\n", ifaceP); - goto error_no_signature; - } - if (debug) { - printk(KERN_DEBUG "ifaceP = 0x%08x\n", ifaceP); - printk(KERN_DEBUG "sabi_iface = %p\n", sabi_iface); + ifaceP = (readw(samsung->sabi + config->header_offsets.data_segment) & 0x0ffff) << 4; + ifaceP += readw(samsung->sabi + config->header_offsets.data_offset) & 0x0ffff; - test_backlight(); - test_wireless(); + if (debug) + samsung_sabi_infos(samsung, loca, ifaceP); - retval = sabi_get_command(sabi_config->commands.get_brightness, - &sretval); - printk(KERN_DEBUG "brightness = 0x%02x\n", sretval.retval[0]); + samsung->sabi_iface = ioremap_nocache(ifaceP, 16); + if (!samsung->sabi_iface) { + pr_err("Can't remap %x\n", ifaceP); + ret = -EINVAL; + goto exit; } /* Turn on "Linux" mode in the BIOS */ - if (sabi_config->commands.set_linux != 0xff) { - retval = sabi_set_command(sabi_config->commands.set_linux, - 0x81); + if (commands->set_linux != 0xff) { + int retval = sabi_set_commandb(samsung, + commands->set_linux, 0x81); if (retval) { pr_warn("Linux mode was not set!\n"); - goto error_no_platform; + ret = -ENODEV; + goto exit; } } /* Check for stepping quirk */ - check_for_stepping_quirk(); + if (samsung->handle_backlight) + check_for_stepping_quirk(samsung); - /* knock up a platform device to hang stuff off of */ - sdev = platform_device_register_simple("samsung", -1, NULL, 0); - if (IS_ERR(sdev)) - goto error_no_platform; + pr_info("detected SABI interface: %s\n", + samsung->config->test_string); - /* create a backlight device to talk to this one */ - memset(&props, 0, sizeof(struct backlight_properties)); - props.type = BACKLIGHT_PLATFORM; - props.max_brightness = sabi_config->max_brightness - - sabi_config->min_brightness; - backlight_device = backlight_device_register("samsung", &sdev->dev, - NULL, &backlight_ops, - &props); - if (IS_ERR(backlight_device)) - goto error_no_backlight; - - backlight_device->props.brightness = read_brightness(); - backlight_device->props.power = FB_BLANK_UNBLANK; - backlight_update_status(backlight_device); - - retval = init_wireless(sdev); - if (retval) - goto error_no_rfk; +exit: + if (ret) + samsung_sabi_exit(samsung); - retval = device_create_file(&sdev->dev, &dev_attr_performance_level); - if (retval) - goto error_file_create; + return ret; +} + +static void samsung_platform_exit(struct samsung_laptop *samsung) +{ + if (samsung->platform_device) { + platform_device_unregister(samsung->platform_device); + samsung->platform_device = NULL; + } +} + +static int __init samsung_platform_init(struct samsung_laptop *samsung) +{ + struct platform_device *pdev; + + pdev = platform_device_register_simple("samsung", -1, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + samsung->platform_device = pdev; + platform_set_drvdata(samsung->platform_device, samsung); return 0; +} + +static struct samsung_quirks *quirks; + +static int __init samsung_dmi_matched(const struct dmi_system_id *d) +{ + quirks = d->driver_data; + return 0; +} + +static struct dmi_system_id __initdata samsung_dmi_table[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */ + }, + }, + /* Specific DMI ids for laptop with quirks */ + { + .callback = samsung_dmi_matched, + .ident = "N150P", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N150P"), + DMI_MATCH(DMI_BOARD_NAME, "N150P"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { + .callback = samsung_dmi_matched, + .ident = "N145P/N250P/N260P", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N145P/N250P/N260P"), + DMI_MATCH(DMI_BOARD_NAME, "N145P/N250P/N260P"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { + .callback = samsung_dmi_matched, + .ident = "N150/N210/N220", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "N150/N210/N220"), + DMI_MATCH(DMI_BOARD_NAME, "N150/N210/N220"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { + .callback = samsung_dmi_matched, + .ident = "NF110/NF210/NF310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NF110/NF210/NF310"), + DMI_MATCH(DMI_BOARD_NAME, "NF110/NF210/NF310"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { }, +}; +MODULE_DEVICE_TABLE(dmi, samsung_dmi_table); -error_file_create: - destroy_wireless(); +static struct platform_device *samsung_platform_device; -error_no_rfk: - backlight_device_unregister(backlight_device); +static int __init samsung_init(void) +{ + struct samsung_laptop *samsung; + int ret; -error_no_backlight: - platform_device_unregister(sdev); + quirks = &samsung_unknown; + if (!force && !dmi_check_system(samsung_dmi_table)) + return -ENODEV; + + samsung = kzalloc(sizeof(*samsung), GFP_KERNEL); + if (!samsung) + return -ENOMEM; -error_no_platform: - iounmap(sabi_iface); + mutex_init(&samsung->sabi_mutex); + samsung->handle_backlight = true; + samsung->quirks = quirks; -error_no_signature: - iounmap(f0000_segment); - return -EINVAL; + +#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE) + /* Don't handle backlight here if the acpi video already handle it */ + if (acpi_video_backlight_support()) { + if (samsung->quirks->broken_acpi_video) { + pr_info("Disabling ACPI video driver\n"); + acpi_video_unregister(); + } else { + samsung->handle_backlight = false; + } + } +#endif + + ret = samsung_platform_init(samsung); + if (ret) + goto error_platform; + + ret = samsung_sabi_init(samsung); + if (ret) + goto error_sabi; + +#ifdef CONFIG_ACPI + /* Only log that if we are really on a sabi platform */ + if (acpi_video_backlight_support() && + !samsung->quirks->broken_acpi_video) + pr_info("Backlight controlled by ACPI video driver\n"); +#endif + + ret = samsung_sysfs_init(samsung); + if (ret) + goto error_sysfs; + + ret = samsung_backlight_init(samsung); + if (ret) + goto error_backlight; + + ret = samsung_rfkill_init(samsung); + if (ret) + goto error_rfkill; + + ret = samsung_leds_init(samsung); + if (ret) + goto error_leds; + + ret = samsung_debugfs_init(samsung); + if (ret) + goto error_debugfs; + + samsung_platform_device = samsung->platform_device; + return ret; + +error_debugfs: + samsung_leds_exit(samsung); +error_leds: + samsung_rfkill_exit(samsung); +error_rfkill: + samsung_backlight_exit(samsung); +error_backlight: + samsung_sysfs_exit(samsung); +error_sysfs: + samsung_sabi_exit(samsung); +error_sabi: + samsung_platform_exit(samsung); +error_platform: + kfree(samsung); + return ret; } static void __exit samsung_exit(void) { - /* Turn off "Linux" mode in the BIOS */ - if (sabi_config->commands.set_linux != 0xff) - sabi_set_command(sabi_config->commands.set_linux, 0x80); - - device_remove_file(&sdev->dev, &dev_attr_performance_level); - backlight_device_unregister(backlight_device); - destroy_wireless(); - iounmap(sabi_iface); - iounmap(f0000_segment); - platform_device_unregister(sdev); + struct samsung_laptop *samsung; + + samsung = platform_get_drvdata(samsung_platform_device); + + samsung_debugfs_exit(samsung); + samsung_leds_exit(samsung); + samsung_rfkill_exit(samsung); + samsung_backlight_exit(samsung); + samsung_sysfs_exit(samsung); + samsung_sabi_exit(samsung); + samsung_platform_exit(samsung); + + kfree(samsung); + samsung_platform_device = NULL; } module_init(samsung_init); diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index c006dee..8a51795 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -127,7 +127,7 @@ MODULE_PARM_DESC(minor, "default is -1 (automatic)"); #endif -static int kbd_backlight; /* = 1 */ +static int kbd_backlight = 1; module_param(kbd_backlight, int, 0444); MODULE_PARM_DESC(kbd_backlight, "set this to 0 to disable keyboard backlight, " @@ -347,6 +347,7 @@ static void sony_laptop_report_input_event(u8 event) struct input_dev *jog_dev = sony_laptop_input.jog_dev; struct input_dev *key_dev = sony_laptop_input.key_dev; struct sony_laptop_keypress kp = { NULL }; + int scancode = -1; if (event == SONYPI_EVENT_FNKEY_RELEASED || event == SONYPI_EVENT_ANYBUTTON_RELEASED) { @@ -380,8 +381,8 @@ static void sony_laptop_report_input_event(u8 event) dprintk("sony_laptop_report_input_event, event not known: %d\n", event); break; } - if (sony_laptop_input_index[event] != -1) { - kp.key = sony_laptop_input_keycode_map[sony_laptop_input_index[event]]; + if ((scancode = sony_laptop_input_index[event]) != -1) { + kp.key = sony_laptop_input_keycode_map[scancode]; if (kp.key != KEY_UNKNOWN) kp.dev = key_dev; } @@ -389,9 +390,11 @@ static void sony_laptop_report_input_event(u8 event) } if (kp.dev) { + /* if we have a scancode we emit it so we can always + remap the key */ + if (scancode != -1) + input_event(kp.dev, EV_MSC, MSC_SCAN, scancode); input_report_key(kp.dev, kp.key, 1); - /* we emit the scancode so we can always remap the key */ - input_event(kp.dev, EV_MSC, MSC_SCAN, event); input_sync(kp.dev); /* schedule key release */ @@ -466,7 +469,7 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device) jog_dev->name = "Sony Vaio Jogdial"; jog_dev->id.bustype = BUS_ISA; jog_dev->id.vendor = PCI_VENDOR_ID_SONY; - key_dev->dev.parent = &acpi_device->dev; + jog_dev->dev.parent = &acpi_device->dev; input_set_capability(jog_dev, EV_KEY, BTN_MIDDLE); input_set_capability(jog_dev, EV_REL, REL_WHEEL); diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index ea0c607..d68c000 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8658,7 +8658,7 @@ static int __must_check __init get_thinkpad_model_data( } s = dmi_get_system_info(DMI_PRODUCT_VERSION); - if (s && !strnicmp(s, "ThinkPad", 8)) { + if (s && !(strnicmp(s, "ThinkPad", 8) && strnicmp(s, "Lenovo", 6))) { tp->model_str = kstrdup(s, GFP_KERNEL); if (!tp->model_str) return -ENOMEM; diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index dcdc1f4..ee79ce6 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -52,6 +52,8 @@ #include <linux/input/sparse-keymap.h> #include <linux/leds.h> #include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/i8042.h> #include <asm/uaccess.h> @@ -61,6 +63,11 @@ MODULE_AUTHOR("John Belmonte"); MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver"); MODULE_LICENSE("GPL"); +#define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" + +/* Scan code for Fn key on TOS1900 models */ +#define TOS1900_FN_SCAN 0x6e + /* Toshiba ACPI method paths */ #define METHOD_VIDEO_OUT "\\_SB_.VALX.DSSX" @@ -95,6 +102,8 @@ MODULE_LICENSE("GPL"); #define HCI_WIRELESS 0x0056 /* field definitions */ +#define HCI_HOTKEY_DISABLE 0x0b +#define HCI_HOTKEY_ENABLE 0x09 #define HCI_LCD_BRIGHTNESS_BITS 3 #define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS) #define HCI_LCD_BRIGHTNESS_LEVELS (1 << HCI_LCD_BRIGHTNESS_BITS) @@ -111,6 +120,7 @@ struct toshiba_acpi_dev { const char *method_hci; struct rfkill *bt_rfk; struct input_dev *hotkey_dev; + struct work_struct hotkey_work; struct backlight_device *backlight_dev; struct led_classdev led_dev; @@ -118,14 +128,18 @@ struct toshiba_acpi_dev { int last_key_event; int key_event_valid; - int illumination_supported:1; - int video_supported:1; - int fan_supported:1; - int system_event_supported:1; + unsigned int illumination_supported:1; + unsigned int video_supported:1; + unsigned int fan_supported:1; + unsigned int system_event_supported:1; + unsigned int ntfy_supported:1; + unsigned int info_supported:1; struct mutex mutex; }; +static struct toshiba_acpi_dev *toshiba_acpi; + static const struct acpi_device_id toshiba_device_ids[] = { {"TOS6200", 0}, {"TOS6208", 0}, @@ -138,6 +152,8 @@ static const struct key_entry toshiba_acpi_keymap[] __devinitconst = { { KE_KEY, 0x101, { KEY_MUTE } }, { KE_KEY, 0x102, { KEY_ZOOMOUT } }, { KE_KEY, 0x103, { KEY_ZOOMIN } }, + { KE_KEY, 0x12c, { KEY_KBDILLUMTOGGLE } }, + { KE_KEY, 0x139, { KEY_ZOOMRESET } }, { KE_KEY, 0x13b, { KEY_COFFEE } }, { KE_KEY, 0x13c, { KEY_BATTERY } }, { KE_KEY, 0x13d, { KEY_SLEEP } }, @@ -146,7 +162,7 @@ static const struct key_entry toshiba_acpi_keymap[] __devinitconst = { { KE_KEY, 0x140, { KEY_BRIGHTNESSDOWN } }, { KE_KEY, 0x141, { KEY_BRIGHTNESSUP } }, { KE_KEY, 0x142, { KEY_WLAN } }, - { KE_KEY, 0x143, { KEY_PROG1 } }, + { KE_KEY, 0x143, { KEY_TOUCHPAD_TOGGLE } }, { KE_KEY, 0x17f, { KEY_FN } }, { KE_KEY, 0xb05, { KEY_PROG2 } }, { KE_KEY, 0xb06, { KEY_WWW } }, @@ -156,6 +172,7 @@ static const struct key_entry toshiba_acpi_keymap[] __devinitconst = { { KE_KEY, 0xb32, { KEY_NEXTSONG } }, { KE_KEY, 0xb33, { KEY_PLAYPAUSE } }, { KE_KEY, 0xb5a, { KEY_MEDIA } }, + { KE_IGNORE, 0x1430, { KEY_RESERVED } }, { KE_END, 0 }, }; @@ -847,10 +864,78 @@ static const struct backlight_ops toshiba_backlight_data = { .update_status = set_lcd_status, }; +static bool toshiba_acpi_i8042_filter(unsigned char data, unsigned char str, + struct serio *port) +{ + if (str & 0x20) + return false; + + if (unlikely(data == 0xe0)) + return false; + + if ((data & 0x7f) == TOS1900_FN_SCAN) { + schedule_work(&toshiba_acpi->hotkey_work); + return true; + } + + return false; +} + +static void toshiba_acpi_hotkey_work(struct work_struct *work) +{ + acpi_handle ec_handle = ec_get_handle(); + acpi_status status; + + if (!ec_handle) + return; + + status = acpi_evaluate_object(ec_handle, "NTFY", NULL, NULL); + if (ACPI_FAILURE(status)) + pr_err("ACPI NTFY method execution failed\n"); +} + +/* + * Returns hotkey scancode, or < 0 on failure. + */ +static int toshiba_acpi_query_hotkey(struct toshiba_acpi_dev *dev) +{ + struct acpi_buffer buf; + union acpi_object out_obj; + acpi_status status; + + buf.pointer = &out_obj; + buf.length = sizeof(out_obj); + + status = acpi_evaluate_object(dev->acpi_dev->handle, "INFO", + NULL, &buf); + if (ACPI_FAILURE(status) || out_obj.type != ACPI_TYPE_INTEGER) { + pr_err("ACPI INFO method execution failed\n"); + return -EIO; + } + + return out_obj.integer.value; +} + +static void toshiba_acpi_report_hotkey(struct toshiba_acpi_dev *dev, + int scancode) +{ + if (scancode == 0x100) + return; + + /* act on key press; ignore key release */ + if (scancode & 0x80) + return; + + if (!sparse_keymap_report_event(dev->hotkey_dev, scancode, 1, true)) + pr_info("Unknown key %x\n", scancode); +} + static int __devinit toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev) { acpi_status status; + acpi_handle ec_handle, handle; int error; + u32 hci_result; dev->hotkey_dev = input_allocate_device(); if (!dev->hotkey_dev) { @@ -866,21 +951,67 @@ static int __devinit toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev) if (error) goto err_free_dev; + /* + * For some machines the SCI responsible for providing hotkey + * notification doesn't fire. We can trigger the notification + * whenever the Fn key is pressed using the NTFY method, if + * supported, so if it's present set up an i8042 key filter + * for this purpose. + */ + status = AE_ERROR; + ec_handle = ec_get_handle(); + if (ec_handle) + status = acpi_get_handle(ec_handle, "NTFY", &handle); + + if (ACPI_SUCCESS(status)) { + INIT_WORK(&dev->hotkey_work, toshiba_acpi_hotkey_work); + + error = i8042_install_filter(toshiba_acpi_i8042_filter); + if (error) { + pr_err("Error installing key filter\n"); + goto err_free_keymap; + } + + dev->ntfy_supported = 1; + } + + /* + * Determine hotkey query interface. Prefer using the INFO + * method when it is available. + */ + status = acpi_get_handle(dev->acpi_dev->handle, "INFO", &handle); + if (ACPI_SUCCESS(status)) { + dev->info_supported = 1; + } else { + hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); + if (hci_result == HCI_SUCCESS) + dev->system_event_supported = 1; + } + + if (!dev->info_supported && !dev->system_event_supported) { + pr_warn("No hotkey query interface found\n"); + goto err_remove_filter; + } + status = acpi_evaluate_object(dev->acpi_dev->handle, "ENAB", NULL, NULL); if (ACPI_FAILURE(status)) { pr_info("Unable to enable hotkeys\n"); error = -ENODEV; - goto err_free_keymap; + goto err_remove_filter; } error = input_register_device(dev->hotkey_dev); if (error) { pr_info("Unable to register input device\n"); - goto err_free_keymap; + goto err_remove_filter; } + hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE, &hci_result); return 0; + err_remove_filter: + if (dev->ntfy_supported) + i8042_remove_filter(toshiba_acpi_i8042_filter); err_free_keymap: sparse_keymap_free(dev->hotkey_dev); err_free_dev: @@ -895,6 +1026,11 @@ static int toshiba_acpi_remove(struct acpi_device *acpi_dev, int type) remove_toshiba_proc_entries(dev); + if (dev->ntfy_supported) { + i8042_remove_filter(toshiba_acpi_i8042_filter); + cancel_work_sync(&dev->hotkey_work); + } + if (dev->hotkey_dev) { input_unregister_device(dev->hotkey_dev); sparse_keymap_free(dev->hotkey_dev); @@ -911,6 +1047,9 @@ static int toshiba_acpi_remove(struct acpi_device *acpi_dev, int type) if (dev->illumination_supported) led_classdev_unregister(&dev->led_dev); + if (toshiba_acpi) + toshiba_acpi = NULL; + kfree(dev); return 0; @@ -936,12 +1075,14 @@ static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev) { struct toshiba_acpi_dev *dev; const char *hci_method; - u32 hci_result; u32 dummy; bool bt_present; int ret = 0; struct backlight_properties props; + if (toshiba_acpi) + return -EBUSY; + pr_info("Toshiba Laptop ACPI Extras version %s\n", TOSHIBA_ACPI_VERSION); @@ -963,11 +1104,6 @@ static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev) mutex_init(&dev->mutex); - /* enable event fifo */ - hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); - if (hci_result == HCI_SUCCESS) - dev->system_event_supported = 1; - props.type = BACKLIGHT_PLATFORM; props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; dev->backlight_dev = backlight_device_register("toshiba", @@ -1024,6 +1160,8 @@ static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev) create_toshiba_proc_entries(dev); + toshiba_acpi = dev; + return 0; error: @@ -1036,40 +1174,64 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev); u32 hci_result, value; int retries = 3; + int scancode; - if (!dev->system_event_supported || event != 0x80) + if (event != 0x80) return; - do { - hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result); - switch (hci_result) { - case HCI_SUCCESS: - if (value == 0x100) - continue; - /* act on key press; ignore key release */ - if (value & 0x80) - continue; - - if (!sparse_keymap_report_event(dev->hotkey_dev, - value, 1, true)) { - pr_info("Unknown key %x\n", - value); + if (dev->info_supported) { + scancode = toshiba_acpi_query_hotkey(dev); + if (scancode < 0) + pr_err("Failed to query hotkey event\n"); + else if (scancode != 0) + toshiba_acpi_report_hotkey(dev, scancode); + } else if (dev->system_event_supported) { + do { + hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result); + switch (hci_result) { + case HCI_SUCCESS: + toshiba_acpi_report_hotkey(dev, (int)value); + break; + case HCI_NOT_SUPPORTED: + /* + * This is a workaround for an unresolved + * issue on some machines where system events + * sporadically become disabled. + */ + hci_write1(dev, HCI_SYSTEM_EVENT, 1, + &hci_result); + pr_notice("Re-enabled hotkeys\n"); + /* fall through */ + default: + retries--; + break; } - break; - case HCI_NOT_SUPPORTED: - /* This is a workaround for an unresolved issue on - * some machines where system events sporadically - * become disabled. */ - hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); - pr_notice("Re-enabled hotkeys\n"); - /* fall through */ - default: - retries--; - break; - } - } while (retries && hci_result != HCI_EMPTY); + } while (retries && hci_result != HCI_EMPTY); + } +} + +static int toshiba_acpi_suspend(struct acpi_device *acpi_dev, + pm_message_t state) +{ + struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev); + u32 result; + + if (dev->hotkey_dev) + hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_DISABLE, &result); + + return 0; } +static int toshiba_acpi_resume(struct acpi_device *acpi_dev) +{ + struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev); + u32 result; + + if (dev->hotkey_dev) + hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE, &result); + + return 0; +} static struct acpi_driver toshiba_acpi_driver = { .name = "Toshiba ACPI driver", @@ -1080,6 +1242,8 @@ static struct acpi_driver toshiba_acpi_driver = { .add = toshiba_acpi_add, .remove = toshiba_acpi_remove, .notify = toshiba_acpi_notify, + .suspend = toshiba_acpi_suspend, + .resume = toshiba_acpi_resume, }, }; @@ -1087,6 +1251,14 @@ static int __init toshiba_acpi_init(void) { int ret; + /* + * Machines with this WMI guid aren't supported due to bugs in + * their AML. This check relies on wmi initializing before + * toshiba_acpi to guarantee guids have been identified. + */ + if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) + return -ENODEV; + toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir); if (!toshiba_proc_dir) { pr_err("Unable to create proc dir " PROC_TOSHIBA "\n"); diff --git a/drivers/platform/x86/xo1-rfkill.c b/drivers/platform/x86/xo1-rfkill.c index e549eee..41781ed 100644 --- a/drivers/platform/x86/xo1-rfkill.c +++ b/drivers/platform/x86/xo1-rfkill.c @@ -67,19 +67,8 @@ static struct platform_driver xo1_rfkill_driver = { .remove = __devexit_p(xo1_rfkill_remove), }; -static int __init xo1_rfkill_init(void) -{ - return platform_driver_register(&xo1_rfkill_driver); -} - -static void __exit xo1_rfkill_exit(void) -{ - platform_driver_unregister(&xo1_rfkill_driver); -} +module_platform_driver(xo1_rfkill_driver); MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:xo1-rfkill"); - -module_init(xo1_rfkill_init); -module_exit(xo1_rfkill_exit); diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index b00c176..d21e8f5 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -321,9 +321,14 @@ static int __init acpi_pnp_match(struct device *dev, void *_pnp) { struct acpi_device *acpi = to_acpi_device(dev); struct pnp_dev *pnp = _pnp; + struct device *physical_device; + + physical_device = acpi_get_physical_device(acpi->handle); + if (physical_device) + put_device(physical_device); /* true means it matched */ - return !acpi_get_physical_device(acpi->handle) + return !physical_device && compare_pnp_id(pnp->id, acpi_device_hid(acpi)); } diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c index b859d16..769d265 100644 --- a/drivers/pnp/pnpbios/bioscalls.c +++ b/drivers/pnp/pnpbios/bioscalls.c @@ -17,7 +17,6 @@ #include <asm/page.h> #include <asm/desc.h> -#include <asm/system.h> #include <asm/byteorder.h> #include "pnpbios.h" diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c index cfe8685..9d42226 100644 --- a/drivers/pnp/pnpbios/core.c +++ b/drivers/pnp/pnpbios/core.c @@ -65,7 +65,6 @@ #include <asm/page.h> #include <asm/desc.h> -#include <asm/system.h> #include <asm/byteorder.h> #include "../base.h" diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 459f664..99dc29f 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -249,7 +249,7 @@ config CHARGER_TWL4030 Say Y here to enable support for TWL4030 Battery Charge Interface. config CHARGER_LP8727 - tristate "National Semiconductor LP8727 charger driver" + tristate "TI/National Semiconductor LP8727 charger driver" depends on I2C help Say Y here to enable support for LP8727 Charger Driver. @@ -288,4 +288,23 @@ config CHARGER_MAX8998 Say Y to enable support for the battery charger control sysfs and platform data of MAX8998/LP3974 PMICs. +config CHARGER_SMB347 + tristate "Summit Microelectronics SMB347 Battery Charger" + depends on I2C + help + Say Y to include support for Summit Microelectronics SMB347 + Battery Charger. + +config AB8500_BM + bool "AB8500 Battery Management Driver" + depends on AB8500_CORE && AB8500_GPADC + help + Say Y to include support for AB5500 battery management. + +config AB8500_BATTERY_THERM_ON_BATCTRL + bool "Thermistor connected on BATCTRL ADC" + depends on AB8500_BM + help + Say Y to enable battery temperature measurements using + thermistor connected on BATCTRL ADC. endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index c590fa5..b6b2434 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o +obj-$(CONFIG_AB8500_BM) += ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o @@ -42,3 +43,4 @@ obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o +obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c new file mode 100644 index 0000000..d8bb993 --- /dev/null +++ b/drivers/power/ab8500_btemp.c @@ -0,0 +1,1124 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Battery temperature driver for AB8500 + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/completion.h> +#include <linux/workqueue.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/jiffies.h> + +#define VTVOUT_V 1800 + +#define BTEMP_THERMAL_LOW_LIMIT -10 +#define BTEMP_THERMAL_MED_LIMIT 0 +#define BTEMP_THERMAL_HIGH_LIMIT_52 52 +#define BTEMP_THERMAL_HIGH_LIMIT_57 57 +#define BTEMP_THERMAL_HIGH_LIMIT_62 62 + +#define BTEMP_BATCTRL_CURR_SRC_7UA 7 +#define BTEMP_BATCTRL_CURR_SRC_20UA 20 + +#define to_ab8500_btemp_device_info(x) container_of((x), \ + struct ab8500_btemp, btemp_psy); + +/** + * struct ab8500_btemp_interrupts - ab8500 interrupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_btemp_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +struct ab8500_btemp_events { + bool batt_rem; + bool btemp_high; + bool btemp_medhigh; + bool btemp_lowmed; + bool btemp_low; + bool ac_conn; + bool usb_conn; +}; + +struct ab8500_btemp_ranges { + int btemp_high_limit; + int btemp_med_limit; + int btemp_low_limit; +}; + +/** + * struct ab8500_btemp - ab8500 BTEMP device information + * @dev: Pointer to the structure device + * @node: List of AB8500 BTEMPs, hence prepared for reentrance + * @curr_source: What current source we use, in uA + * @bat_temp: Battery temperature in degree Celcius + * @prev_bat_temp Last dispatched battery temperature + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @fg: Pointer to the struct fg + * @pdata: Pointer to the abx500_btemp platform data + * @bat: Pointer to the abx500_bm platform data + * @btemp_psy: Structure for BTEMP specific battery properties + * @events: Structure for information about events triggered + * @btemp_ranges: Battery temperature range structure + * @btemp_wq: Work queue for measuring the temperature periodically + * @btemp_periodic_work: Work for measuring the temperature periodically + */ +struct ab8500_btemp { + struct device *dev; + struct list_head node; + int curr_source; + int bat_temp; + int prev_bat_temp; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct ab8500_fg *fg; + struct abx500_btemp_platform_data *pdata; + struct abx500_bm_data *bat; + struct power_supply btemp_psy; + struct ab8500_btemp_events events; + struct ab8500_btemp_ranges btemp_ranges; + struct workqueue_struct *btemp_wq; + struct delayed_work btemp_periodic_work; +}; + +/* BTEMP power supply properties */ +static enum power_supply_property ab8500_btemp_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_TEMP, +}; + +static LIST_HEAD(ab8500_btemp_list); + +/** + * ab8500_btemp_get() - returns a reference to the primary AB8500 BTEMP + * (i.e. the first BTEMP in the instance list) + */ +struct ab8500_btemp *ab8500_btemp_get(void) +{ + struct ab8500_btemp *btemp; + btemp = list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node); + + return btemp; +} + +/** + * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance + * @di: pointer to the ab8500_btemp structure + * @v_batctrl: measured batctrl voltage + * @inst_curr: measured instant current + * + * This function returns the battery resistance that is + * derived from the BATCTRL voltage. + * Returns value in Ohms. + */ +static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, + int v_batctrl, int inst_curr) +{ + int rbs; + + if (is_ab8500_1p1_or_earlier(di->parent)) { + /* + * For ABB cut1.0 and 1.1 BAT_CTRL is internally + * connected to 1.8V through a 450k resistor + */ + return (450000 * (v_batctrl)) / (1800 - v_batctrl); + } + + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) { + /* + * If the battery has internal NTC, we use the current + * source to calculate the resistance, 7uA or 20uA + */ + rbs = (v_batctrl * 1000 + - di->bat->gnd_lift_resistance * inst_curr) + / di->curr_source; + } else { + /* + * BAT_CTRL is internally + * connected to 1.8V through a 80k resistor + */ + rbs = (80000 * (v_batctrl)) / (1800 - v_batctrl); + } + + return rbs; +} + +/** + * ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage + * @di: pointer to the ab8500_btemp structure + * + * This function returns the voltage on BATCTRL. Returns value in mV. + */ +static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di) +{ + int vbtemp; + static int prev; + + vbtemp = ab8500_gpadc_convert(di->gpadc, BAT_CTRL); + if (vbtemp < 0) { + dev_err(di->dev, + "%s gpadc conversion failed, using previous value", + __func__); + return prev; + } + prev = vbtemp; + return vbtemp; +} + +/** + * ab8500_btemp_curr_source_enable() - enable/disable batctrl current source + * @di: pointer to the ab8500_btemp structure + * @enable: enable or disable the current source + * + * Enable or disable the current sources for the BatCtrl AD channel + */ +static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, + bool enable) +{ + int curr; + int ret = 0; + + /* + * BATCTRL current sources are included on AB8500 cut2.0 + * and future versions + */ + if (is_ab8500_1p1_or_earlier(di->parent)) + return 0; + + /* Only do this for batteries with internal NTC */ + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) + curr = BAT_CTRL_7U_ENA; + else + curr = BAT_CTRL_20U_ENA; + + dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed setting cmp_force\n", + __func__); + return ret; + } + + /* + * We have to wait one 32kHz cycle before enabling + * the current source, since ForceBatCtrlCmpHigh needs + * to be written in a separate cycle + */ + udelay(32); + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH | curr); + if (ret) { + dev_err(di->dev, "%s failed enabling current source\n", + __func__); + goto disable_curr_source; + } + } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { + dev_dbg(di->dev, "Disable BATCTRL curr source\n"); + + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, + ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + if (ret) { + dev_err(di->dev, "%s failed disabling current source\n", + __func__); + goto disable_curr_source; + } + + /* Enable Pull-Up and comparator */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA); + if (ret) { + dev_err(di->dev, "%s failed enabling PU and comp\n", + __func__); + goto enable_pu_comp; + } + + /* + * We have to wait one 32kHz cycle before disabling + * ForceBatCtrlCmpHigh since this needs to be written + * in a separate cycle + */ + udelay(32); + + /* Disable 'force comparator' */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed disabling force comp\n", + __func__); + goto disable_force_comp; + } + } + return ret; + + /* + * We have to try unsetting FORCE_BAT_CTRL_CMP_HIGH one more time + * if we got an error above + */ +disable_curr_source: + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, + ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + if (ret) { + dev_err(di->dev, "%s failed disabling current source\n", + __func__); + return ret; + } +enable_pu_comp: + /* Enable Pull-Up and comparator */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA, + BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA); + if (ret) { + dev_err(di->dev, "%s failed enabling PU and comp\n", + __func__); + return ret; + } + +disable_force_comp: + /* + * We have to wait one 32kHz cycle before disabling + * ForceBatCtrlCmpHigh since this needs to be written + * in a separate cycle + */ + udelay(32); + + /* Disable 'force comparator' */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH); + if (ret) { + dev_err(di->dev, "%s failed disabling force comp\n", + __func__); + return ret; + } + + return ret; +} + +/** + * ab8500_btemp_get_batctrl_res() - get battery resistance + * @di: pointer to the ab8500_btemp structure + * + * This function returns the battery pack identification resistance. + * Returns value in Ohms. + */ +static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) +{ + int ret; + int batctrl = 0; + int res; + int inst_curr; + int i; + + /* + * BATCTRL current sources are included on AB8500 cut2.0 + * and future versions + */ + ret = ab8500_btemp_curr_source_enable(di, true); + if (ret) { + dev_err(di->dev, "%s curr source enabled failed\n", __func__); + return ret; + } + + if (!di->fg) + di->fg = ab8500_fg_get(); + if (!di->fg) { + dev_err(di->dev, "No fg found\n"); + return -EINVAL; + } + + ret = ab8500_fg_inst_curr_start(di->fg); + + if (ret) { + dev_err(di->dev, "Failed to start current measurement\n"); + return ret; + } + + /* + * Since there is no interrupt when current measurement is done, + * loop for over 250ms (250ms is one sample conversion time + * with 32.768 Khz RTC clock). Note that a stop time must be set + * since the ab8500_btemp_read_batctrl_voltage call can block and + * take an unknown amount of time to complete. + */ + i = 0; + + do { + batctrl += ab8500_btemp_read_batctrl_voltage(di); + i++; + msleep(20); + } while (!ab8500_fg_inst_curr_done(di->fg)); + batctrl /= i; + + ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr); + if (ret) { + dev_err(di->dev, "Failed to finalize current measurement\n"); + return ret; + } + + res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr); + + ret = ab8500_btemp_curr_source_enable(di, false); + if (ret) { + dev_err(di->dev, "%s curr source disable failed\n", __func__); + return ret; + } + + dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n", + __func__, batctrl, res, inst_curr, i); + + return res; +} + +/** + * ab8500_btemp_res_to_temp() - resistance to temperature + * @di: pointer to the ab8500_btemp structure + * @tbl: pointer to the resiatance to temperature table + * @tbl_size: size of the resistance to temperature table + * @res: resistance to calculate the temperature from + * + * This function returns the battery temperature in degrees Celcius + * based on the NTC resistance. + */ +static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di, + const struct abx500_res_to_temp *tbl, int tbl_size, int res) +{ + int i, temp; + /* + * Calculate the formula for the straight line + * Simple interpolation if we are within + * the resistance table limits, extrapolate + * if resistance is outside the limits. + */ + if (res > tbl[0].resist) + i = 0; + else if (res <= tbl[tbl_size - 1].resist) + i = tbl_size - 2; + else { + i = 0; + while (!(res <= tbl[i].resist && + res > tbl[i + 1].resist)) + i++; + } + + temp = tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) * + (res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist); + return temp; +} + +/** + * ab8500_btemp_measure_temp() - measure battery temperature + * @di: pointer to the ab8500_btemp structure + * + * Returns battery temperature (on success) else the previous temperature + */ +static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) +{ + int temp; + static int prev; + int rbat, rntc, vntc; + u8 id; + + id = di->bat->batt_id; + + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && + id != BATTERY_UNKNOWN) { + + rbat = ab8500_btemp_get_batctrl_res(di); + if (rbat < 0) { + dev_err(di->dev, "%s get batctrl res failed\n", + __func__); + /* + * Return out-of-range temperature so that + * charging is stopped + */ + return BTEMP_THERMAL_LOW_LIMIT; + } + + temp = ab8500_btemp_res_to_temp(di, + di->bat->bat_type[id].r_to_t_tbl, + di->bat->bat_type[id].n_temp_tbl_elements, rbat); + } else { + vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL); + if (vntc < 0) { + dev_err(di->dev, + "%s gpadc conversion failed," + " using previous value\n", __func__); + return prev; + } + /* + * The PCB NTC is sourced from VTVOUT via a 230kOhm + * resistor. + */ + rntc = 230000 * vntc / (VTVOUT_V - vntc); + + temp = ab8500_btemp_res_to_temp(di, + di->bat->bat_type[id].r_to_t_tbl, + di->bat->bat_type[id].n_temp_tbl_elements, rntc); + prev = temp; + } + dev_dbg(di->dev, "Battery temperature is %d\n", temp); + return temp; +} + +/** + * ab8500_btemp_id() - Identify the connected battery + * @di: pointer to the ab8500_btemp structure + * + * This function will try to identify the battery by reading the ID + * resistor. Some brands use a combined ID resistor with a NTC resistor to + * both be able to identify and to read the temperature of it. + */ +static int ab8500_btemp_id(struct ab8500_btemp *di) +{ + int res; + u8 i; + + di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; + di->bat->batt_id = BATTERY_UNKNOWN; + + res = ab8500_btemp_get_batctrl_res(di); + if (res < 0) { + dev_err(di->dev, "%s get batctrl res failed\n", __func__); + return -ENXIO; + } + + /* BATTERY_UNKNOWN is defined on position 0, skip it! */ + for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) { + if ((res <= di->bat->bat_type[i].resis_high) && + (res >= di->bat->bat_type[i].resis_low)) { + dev_dbg(di->dev, "Battery detected on %s" + " low %d < res %d < high: %d" + " index: %d\n", + di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ? + "BATCTRL" : "BATTEMP", + di->bat->bat_type[i].resis_low, res, + di->bat->bat_type[i].resis_high, i); + + di->bat->batt_id = i; + break; + } + } + + if (di->bat->batt_id == BATTERY_UNKNOWN) { + dev_warn(di->dev, "Battery identified as unknown" + ", resistance %d Ohm\n", res); + return -ENXIO; + } + + /* + * We only have to change current source if the + * detected type is Type 1, else we use the 7uA source + */ + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && + di->bat->batt_id == 1) { + dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; + } + + return di->bat->batt_id; +} + +/** + * ab8500_btemp_periodic_work() - Measuring the temperature periodically + * @work: pointer to the work_struct structure + * + * Work function for measuring the temperature periodically + */ +static void ab8500_btemp_periodic_work(struct work_struct *work) +{ + int interval; + struct ab8500_btemp *di = container_of(work, + struct ab8500_btemp, btemp_periodic_work.work); + + di->bat_temp = ab8500_btemp_measure_temp(di); + + if (di->bat_temp != di->prev_bat_temp) { + di->prev_bat_temp = di->bat_temp; + power_supply_changed(&di->btemp_psy); + } + + if (di->events.ac_conn || di->events.usb_conn) + interval = di->bat->temp_interval_chg; + else + interval = di->bat->temp_interval_nochg; + + /* Schedule a new measurement */ + queue_delayed_work(di->btemp_wq, + &di->btemp_periodic_work, + round_jiffies(interval * HZ)); +} + +/** + * ab8500_btemp_batctrlindb_handler() - battery removal detected + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + dev_err(di->dev, "Battery removal detected!\n"); + + di->events.batt_rem = true; + power_supply_changed(&di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_templow_handler() - battery temp lower than 10 degrees + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + if (is_ab8500_2p0_or_earlier(di->parent)) { + dev_dbg(di->dev, "Ignore false btemp low irq" + " for ABB cut 1.0, 1.1 and 2.0\n"); + } else { + dev_crit(di->dev, "Battery temperature lower than -10deg c\n"); + + di->events.btemp_low = true; + di->events.btemp_high = false; + di->events.btemp_medhigh = false; + di->events.btemp_lowmed = false; + power_supply_changed(&di->btemp_psy); + } + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_temphigh_handler() - battery temp higher than max temp + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_crit(di->dev, "Battery temperature is higher than MAX temp\n"); + + di->events.btemp_high = true; + di->events.btemp_medhigh = false; + di->events.btemp_lowmed = false; + di->events.btemp_low = false; + power_supply_changed(&di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_lowmed_handler() - battery temp between low and medium + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_dbg(di->dev, "Battery temperature is between low and medium\n"); + + di->events.btemp_lowmed = true; + di->events.btemp_medhigh = false; + di->events.btemp_high = false; + di->events.btemp_low = false; + power_supply_changed(&di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_medhigh_handler() - battery temp between medium and high + * @irq: interrupt number + * @_di: void pointer that has to address of ab8500_btemp + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di) +{ + struct ab8500_btemp *di = _di; + + dev_dbg(di->dev, "Battery temperature is between medium and high\n"); + + di->events.btemp_medhigh = true; + di->events.btemp_lowmed = false; + di->events.btemp_high = false; + di->events.btemp_low = false; + power_supply_changed(&di->btemp_psy); + + return IRQ_HANDLED; +} + +/** + * ab8500_btemp_periodic() - Periodic temperature measurements + * @di: pointer to the ab8500_btemp structure + * @enable: enable or disable periodic temperature measurements + * + * Starts of stops periodic temperature measurements. Periodic measurements + * should only be done when a charger is connected. + */ +static void ab8500_btemp_periodic(struct ab8500_btemp *di, + bool enable) +{ + dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n", + enable); + /* + * Make sure a new measurement is done directly by cancelling + * any pending work + */ + cancel_delayed_work_sync(&di->btemp_periodic_work); + + if (enable) + queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0); +} + +/** + * ab8500_btemp_get_temp() - get battery temperature + * @di: pointer to the ab8500_btemp structure + * + * Returns battery temperature + */ +static int ab8500_btemp_get_temp(struct ab8500_btemp *di) +{ + int temp = 0; + + /* + * The BTEMP events are not reliabe on AB8500 cut2.0 + * and prior versions + */ + if (is_ab8500_2p0_or_earlier(di->parent)) { + temp = di->bat_temp * 10; + } else { + if (di->events.btemp_low) { + if (temp > di->btemp_ranges.btemp_low_limit) + temp = di->btemp_ranges.btemp_low_limit; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_high) { + if (temp < di->btemp_ranges.btemp_high_limit) + temp = di->btemp_ranges.btemp_high_limit; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_lowmed) { + if (temp > di->btemp_ranges.btemp_med_limit) + temp = di->btemp_ranges.btemp_med_limit; + else + temp = di->bat_temp * 10; + } else if (di->events.btemp_medhigh) { + if (temp < di->btemp_ranges.btemp_med_limit) + temp = di->btemp_ranges.btemp_med_limit; + else + temp = di->bat_temp * 10; + } else + temp = di->bat_temp * 10; + } + return temp; +} + +/** + * ab8500_btemp_get_batctrl_temp() - get the temperature + * @btemp: pointer to the btemp structure + * + * Returns the batctrl temperature in millidegrees + */ +int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) +{ + return btemp->bat_temp * 1000; +} + +/** + * ab8500_btemp_get_property() - get the btemp properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the btemp + * properties by reading the sysfs files. + * online: presence of the battery + * present: presence of the battery + * technology: battery technology + * temp: battery temperature + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_btemp_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_btemp *di; + + di = to_ab8500_btemp_device_info(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + case POWER_SUPPLY_PROP_ONLINE: + if (di->events.batt_rem) + val->intval = 0; + else + val->intval = 1; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = di->bat->bat_type[di->bat->batt_id].name; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = ab8500_btemp_get_temp(di); + break; + default: + return -EINVAL; + } + return 0; +} + +static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_btemp *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + + psy = (struct power_supply *)data; + ext = dev_get_drvdata(dev); + di = to_ab8500_btemp_device_info(psy); + + /* + * For all psy where the name of your driver + * appears in any supplied_to + */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + if (ext->get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + switch (ext->type) { + case POWER_SUPPLY_TYPE_MAINS: + /* AC disconnected */ + if (!ret.intval && di->events.ac_conn) { + di->events.ac_conn = false; + } + /* AC connected */ + else if (ret.intval && !di->events.ac_conn) { + di->events.ac_conn = true; + if (!di->events.usb_conn) + ab8500_btemp_periodic(di, true); + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB disconnected */ + if (!ret.intval && di->events.usb_conn) { + di->events.usb_conn = false; + } + /* USB connected */ + else if (ret.intval && !di->events.usb_conn) { + di->events.usb_conn = true; + if (!di->events.ac_conn) + ab8500_btemp_periodic(di, true); + } + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_btemp_external_power_changed() - callback for power supply changes + * @psy: pointer to the structure power_supply + * + * This function is pointing to the function pointer external_power_changed + * of the structure power_supply. + * This function gets executed when there is a change in the external power + * supply to the btemp. + */ +static void ab8500_btemp_external_power_changed(struct power_supply *psy) +{ + struct ab8500_btemp *di = to_ab8500_btemp_device_info(psy); + + class_for_each_device(power_supply_class, NULL, + &di->btemp_psy, ab8500_btemp_get_ext_psy_data); +} + +/* ab8500 btemp driver interrupts and their respective isr */ +static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = { + {"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler}, + {"BTEMP_LOW", ab8500_btemp_templow_handler}, + {"BTEMP_HIGH", ab8500_btemp_temphigh_handler}, + {"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler}, + {"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler}, +}; + +#if defined(CONFIG_PM) +static int ab8500_btemp_resume(struct platform_device *pdev) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + + ab8500_btemp_periodic(di, true); + + return 0; +} + +static int ab8500_btemp_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + + ab8500_btemp_periodic(di, false); + + return 0; +} +#else +#define ab8500_btemp_suspend NULL +#define ab8500_btemp_resume NULL +#endif + +static int __devexit ab8500_btemp_remove(struct platform_device *pdev) +{ + struct ab8500_btemp *di = platform_get_drvdata(pdev); + int i, irq; + + /* Disable interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + free_irq(irq, di); + } + + /* Delete the work queue */ + destroy_workqueue(di->btemp_wq); + + flush_scheduled_work(); + power_supply_unregister(&di->btemp_psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + + return 0; +} + +static int __devinit ab8500_btemp_probe(struct platform_device *pdev) +{ + int irq, i, ret = 0; + u8 val; + struct abx500_bm_plat_data *plat_data; + + struct ab8500_btemp *di = + kzalloc(sizeof(struct ab8500_btemp), GFP_KERNEL); + if (!di) + return -ENOMEM; + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* get btemp specific platform data */ + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->btemp; + if (!di->pdata) { + dev_err(di->dev, "no btemp platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* get battery specific platform data */ + di->bat = plat_data->battery; + if (!di->bat) { + dev_err(di->dev, "no battery platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* BTEMP supply */ + di->btemp_psy.name = "ab8500_btemp"; + di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY; + di->btemp_psy.properties = ab8500_btemp_props; + di->btemp_psy.num_properties = ARRAY_SIZE(ab8500_btemp_props); + di->btemp_psy.get_property = ab8500_btemp_get_property; + di->btemp_psy.supplied_to = di->pdata->supplied_to; + di->btemp_psy.num_supplicants = di->pdata->num_supplicants; + di->btemp_psy.external_power_changed = + ab8500_btemp_external_power_changed; + + + /* Create a work queue for the btemp */ + di->btemp_wq = + create_singlethread_workqueue("ab8500_btemp_wq"); + if (di->btemp_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for measuring temperature periodically */ + INIT_DELAYED_WORK_DEFERRABLE(&di->btemp_periodic_work, + ab8500_btemp_periodic_work); + + /* Identify the battery */ + if (ab8500_btemp_id(di) < 0) + dev_warn(di->dev, "failed to identify the battery\n"); + + /* Set BTEMP thermal limits. Low and Med are fixed */ + di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT; + di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_BTEMP_HIGH_TH, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + goto free_btemp_wq; + } + switch (val) { + case BTEMP_HIGH_TH_57_0: + case BTEMP_HIGH_TH_57_1: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_57; + break; + case BTEMP_HIGH_TH_52: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_52; + break; + case BTEMP_HIGH_TH_62: + di->btemp_ranges.btemp_high_limit = + BTEMP_THERMAL_HIGH_LIMIT_62; + break; + } + + /* Register BTEMP power supply class */ + ret = power_supply_register(di->dev, &di->btemp_psy); + if (ret) { + dev_err(di->dev, "failed to register BTEMP psy\n"); + goto free_btemp_wq; + } + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_btemp_irq[i].name, di); + + if (ret) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_btemp_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_btemp_irq[i].name, irq, ret); + } + + platform_set_drvdata(pdev, di); + + /* Kick off periodic temperature measurements */ + ab8500_btemp_periodic(di, true); + list_add_tail(&di->node, &ab8500_btemp_list); + + return ret; + +free_irq: + power_supply_unregister(&di->btemp_psy); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name); + free_irq(irq, di); + } +free_btemp_wq: + destroy_workqueue(di->btemp_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver ab8500_btemp_driver = { + .probe = ab8500_btemp_probe, + .remove = __devexit_p(ab8500_btemp_remove), + .suspend = ab8500_btemp_suspend, + .resume = ab8500_btemp_resume, + .driver = { + .name = "ab8500-btemp", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_btemp_init(void) +{ + return platform_driver_register(&ab8500_btemp_driver); +} + +static void __exit ab8500_btemp_exit(void) +{ + platform_driver_unregister(&ab8500_btemp_driver); +} + +subsys_initcall_sync(ab8500_btemp_init); +module_exit(ab8500_btemp_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); +MODULE_ALIAS("platform:ab8500-btemp"); +MODULE_DESCRIPTION("AB8500 battery temperature driver"); diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c new file mode 100644 index 0000000..e2b4acc --- /dev/null +++ b/drivers/power/ab8500_charger.c @@ -0,0 +1,2789 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Charger driver for AB8500 + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/completion.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/workqueue.h> +#include <linux/kobject.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/mfd/abx500/ux500_chargalg.h> +#include <linux/usb/otg.h> + +/* Charger constants */ +#define NO_PW_CONN 0 +#define AC_PW_CONN 1 +#define USB_PW_CONN 2 + +#define MAIN_WDOG_ENA 0x01 +#define MAIN_WDOG_KICK 0x02 +#define MAIN_WDOG_DIS 0x00 +#define CHARG_WD_KICK 0x01 +#define MAIN_CH_ENA 0x01 +#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 +#define USB_CH_ENA 0x01 +#define USB_CHG_NO_OVERSHOOT_ENA_N 0x02 +#define MAIN_CH_DET 0x01 +#define MAIN_CH_CV_ON 0x04 +#define USB_CH_CV_ON 0x08 +#define VBUS_DET_DBNC100 0x02 +#define VBUS_DET_DBNC1 0x01 +#define OTP_ENABLE_WD 0x01 + +#define MAIN_CH_INPUT_CURR_SHIFT 4 +#define VBUS_IN_CURR_LIM_SHIFT 4 + +#define LED_INDICATOR_PWM_ENA 0x01 +#define LED_INDICATOR_PWM_DIS 0x00 +#define LED_IND_CUR_5MA 0x04 +#define LED_INDICATOR_PWM_DUTY_252_256 0xBF + +/* HW failure constants */ +#define MAIN_CH_TH_PROT 0x02 +#define VBUS_CH_NOK 0x08 +#define USB_CH_TH_PROT 0x02 +#define VBUS_OVV_TH 0x01 +#define MAIN_CH_NOK 0x01 +#define VBUS_DET 0x80 + +/* UsbLineStatus register bit masks */ +#define AB8500_USB_LINK_STATUS 0x78 +#define AB8500_STD_HOST_SUSP 0x18 + +/* Watchdog timeout constant */ +#define WD_TIMER 0x30 /* 4min */ +#define WD_KICK_INTERVAL (60 * HZ) + +/* Lowest charger voltage is 3.39V -> 0x4E */ +#define LOW_VOLT_REG 0x4E + +/* UsbLineStatus register - usb types */ +enum ab8500_charger_link_status { + USB_STAT_NOT_CONFIGURED, + USB_STAT_STD_HOST_NC, + USB_STAT_STD_HOST_C_NS, + USB_STAT_STD_HOST_C_S, + USB_STAT_HOST_CHG_NM, + USB_STAT_HOST_CHG_HS, + USB_STAT_HOST_CHG_HS_CHIRP, + USB_STAT_DEDICATED_CHG, + USB_STAT_ACA_RID_A, + USB_STAT_ACA_RID_B, + USB_STAT_ACA_RID_C_NM, + USB_STAT_ACA_RID_C_HS, + USB_STAT_ACA_RID_C_HS_CHIRP, + USB_STAT_HM_IDGND, + USB_STAT_RESERVED, + USB_STAT_NOT_VALID_LINK, +}; + +enum ab8500_usb_state { + AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */ + AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */ + AB8500_BM_USB_STATE_CONFIGURED, + AB8500_BM_USB_STATE_SUSPEND, + AB8500_BM_USB_STATE_RESUME, + AB8500_BM_USB_STATE_MAX, +}; + +/* VBUS input current limits supported in AB8500 in mA */ +#define USB_CH_IP_CUR_LVL_0P05 50 +#define USB_CH_IP_CUR_LVL_0P09 98 +#define USB_CH_IP_CUR_LVL_0P19 193 +#define USB_CH_IP_CUR_LVL_0P29 290 +#define USB_CH_IP_CUR_LVL_0P38 380 +#define USB_CH_IP_CUR_LVL_0P45 450 +#define USB_CH_IP_CUR_LVL_0P5 500 +#define USB_CH_IP_CUR_LVL_0P6 600 +#define USB_CH_IP_CUR_LVL_0P7 700 +#define USB_CH_IP_CUR_LVL_0P8 800 +#define USB_CH_IP_CUR_LVL_0P9 900 +#define USB_CH_IP_CUR_LVL_1P0 1000 +#define USB_CH_IP_CUR_LVL_1P1 1100 +#define USB_CH_IP_CUR_LVL_1P3 1300 +#define USB_CH_IP_CUR_LVL_1P4 1400 +#define USB_CH_IP_CUR_LVL_1P5 1500 + +#define VBAT_TRESH_IP_CUR_RED 3800 + +#define to_ab8500_charger_usb_device_info(x) container_of((x), \ + struct ab8500_charger, usb_chg) +#define to_ab8500_charger_ac_device_info(x) container_of((x), \ + struct ab8500_charger, ac_chg) + +/** + * struct ab8500_charger_interrupts - ab8500 interupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_charger_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +struct ab8500_charger_info { + int charger_connected; + int charger_online; + int charger_voltage; + int cv_active; + bool wd_expired; +}; + +struct ab8500_charger_event_flags { + bool mainextchnotok; + bool main_thermal_prot; + bool usb_thermal_prot; + bool vbus_ovv; + bool usbchargernotok; + bool chgwdexp; + bool vbus_collapse; +}; + +struct ab8500_charger_usb_state { + bool usb_changed; + int usb_current; + enum ab8500_usb_state state; + spinlock_t usb_lock; +}; + +/** + * struct ab8500_charger - ab8500 Charger device information + * @dev: Pointer to the structure device + * @max_usb_in_curr: Max USB charger input current + * @vbus_detected: VBUS detected + * @vbus_detected_start: + * VBUS detected during startup + * @ac_conn: This will be true when the AC charger has been plugged + * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC + * charger is enabled + * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB + * charger is enabled + * @vbat Battery voltage + * @old_vbat Previously measured battery voltage + * @autopower Indicate if we should have automatic pwron after pwrloss + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @pdata: Pointer to the abx500_charger platform data + * @bat: Pointer to the abx500_bm platform data + * @flags: Structure for information about events triggered + * @usb_state: Structure for usb stack information + * @ac_chg: AC charger power supply + * @usb_chg: USB charger power supply + * @ac: Structure that holds the AC charger properties + * @usb: Structure that holds the USB charger properties + * @regu: Pointer to the struct regulator + * @charger_wq: Work queue for the IRQs and checking HW state + * @check_vbat_work Work for checking vbat threshold to adjust vbus current + * @check_hw_failure_work: Work for checking HW state + * @check_usbchgnotok_work: Work for checking USB charger not ok status + * @kick_wd_work: Work for kicking the charger watchdog in case + * of ABB rev 1.* due to the watchog logic bug + * @ac_work: Work for checking AC charger connection + * @detect_usb_type_work: Work for detecting the USB type connected + * @usb_link_status_work: Work for checking the new USB link status + * @usb_state_changed_work: Work for checking USB state + * @check_main_thermal_prot_work: + * Work for checking Main thermal status + * @check_usb_thermal_prot_work: + * Work for checking USB thermal status + */ +struct ab8500_charger { + struct device *dev; + int max_usb_in_curr; + bool vbus_detected; + bool vbus_detected_start; + bool ac_conn; + bool vddadc_en_ac; + bool vddadc_en_usb; + int vbat; + int old_vbat; + bool autopower; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct abx500_charger_platform_data *pdata; + struct abx500_bm_data *bat; + struct ab8500_charger_event_flags flags; + struct ab8500_charger_usb_state usb_state; + struct ux500_charger ac_chg; + struct ux500_charger usb_chg; + struct ab8500_charger_info ac; + struct ab8500_charger_info usb; + struct regulator *regu; + struct workqueue_struct *charger_wq; + struct delayed_work check_vbat_work; + struct delayed_work check_hw_failure_work; + struct delayed_work check_usbchgnotok_work; + struct delayed_work kick_wd_work; + struct work_struct ac_work; + struct work_struct detect_usb_type_work; + struct work_struct usb_link_status_work; + struct work_struct usb_state_changed_work; + struct work_struct check_main_thermal_prot_work; + struct work_struct check_usb_thermal_prot_work; + struct usb_phy *usb_phy; + struct notifier_block nb; +}; + +/* AC properties */ +static enum power_supply_property ab8500_charger_ac_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +/* USB properties */ +static enum power_supply_property ab8500_charger_usb_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +/** + * ab8500_power_loss_handling - set how we handle powerloss. + * @di: pointer to the ab8500_charger structure + * + * Magic nummbers are from STE HW department. + */ +static void ab8500_power_loss_handling(struct ab8500_charger *di) +{ + u8 reg; + int ret; + + dev_dbg(di->dev, "Autopower : %d\n", di->autopower); + + /* read the autopower register */ + ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, ®); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + /* enable the OPT emulation registers */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + if (di->autopower) + reg |= 0x8; + else + reg &= ~0x8; + + /* write back the changed value to autopower reg */ + ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + /* disable the set OTP registers again */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } +} + +/** + * ab8500_power_supply_changed - a wrapper with local extentions for + * power_supply_changed + * @di: pointer to the ab8500_charger structure + * @psy: pointer to power_supply_that have changed. + * + */ +static void ab8500_power_supply_changed(struct ab8500_charger *di, + struct power_supply *psy) +{ + if (di->pdata->autopower_cfg) { + if (!di->usb.charger_connected && + !di->ac.charger_connected && + di->autopower) { + di->autopower = false; + ab8500_power_loss_handling(di); + } else if (!di->autopower && + (di->ac.charger_connected || + di->usb.charger_connected)) { + di->autopower = true; + ab8500_power_loss_handling(di); + } + } + power_supply_changed(psy); +} + +static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, + bool connected) +{ + if (connected != di->usb.charger_connected) { + dev_dbg(di->dev, "USB connected:%i\n", connected); + di->usb.charger_connected = connected; + sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present"); + } +} + +/** + * ab8500_charger_get_ac_voltage() - get ac charger voltage + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger voltage (on success) + */ +static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) +{ + int vch; + + /* Only measure voltage if the charger is connected */ + if (di->ac.charger_connected) { + vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); + if (vch < 0) + dev_err(di->dev, "%s gpadc conv failed,\n", __func__); + } else { + vch = 0; + } + return vch; +} + +/** + * ab8500_charger_ac_cv() - check if the main charger is in CV mode + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger CV mode (on success) else error code + */ +static int ab8500_charger_ac_cv(struct ab8500_charger *di) +{ + u8 val; + int ret = 0; + + /* Only check CV mode if the charger is online */ + if (di->ac.charger_online) { + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_STATUS1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return 0; + } + + if (val & MAIN_CH_CV_ON) + ret = 1; + else + ret = 0; + } + + return ret; +} + +/** + * ab8500_charger_get_vbus_voltage() - get vbus voltage + * @di: pointer to the ab8500_charger structure + * + * This function returns the vbus voltage. + * Returns vbus voltage (on success) + */ +static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) +{ + int vch; + + /* Only measure voltage if the charger is connected */ + if (di->usb.charger_connected) { + vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); + if (vch < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + vch = 0; + } + return vch; +} + +/** + * ab8500_charger_get_usb_current() - get usb charger current + * @di: pointer to the ab8500_charger structure + * + * This function returns the usb charger current. + * Returns usb current (on success) and error code on failure + */ +static int ab8500_charger_get_usb_current(struct ab8500_charger *di) +{ + int ich; + + /* Only measure current if the charger is online */ + if (di->usb.charger_online) { + ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); + if (ich < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + ich = 0; + } + return ich; +} + +/** + * ab8500_charger_get_ac_current() - get ac charger current + * @di: pointer to the ab8500_charger structure + * + * This function returns the ac charger current. + * Returns ac current (on success) and error code on failure. + */ +static int ab8500_charger_get_ac_current(struct ab8500_charger *di) +{ + int ich; + + /* Only measure current if the charger is online */ + if (di->ac.charger_online) { + ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); + if (ich < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + ich = 0; + } + return ich; +} + +/** + * ab8500_charger_usb_cv() - check if the usb charger is in CV mode + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger CV mode (on success) else error code + */ +static int ab8500_charger_usb_cv(struct ab8500_charger *di) +{ + int ret; + u8 val; + + /* Only check CV mode if the charger is online */ + if (di->usb.charger_online) { + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return 0; + } + + if (val & USB_CH_CV_ON) + ret = 1; + else + ret = 0; + } else { + ret = 0; + } + + return ret; +} + +/** + * ab8500_charger_detect_chargers() - Detect the connected chargers + * @di: pointer to the ab8500_charger structure + * + * Returns the type of charger connected. + * For USB it will not mean we can actually charge from it + * but that there is a USB cable connected that we have to + * identify. This is used during startup when we don't get + * interrupts of the charger detection + * + * Returns an integer value, that means, + * NO_PW_CONN no power supply is connected + * AC_PW_CONN if the AC power supply is connected + * USB_PW_CONN if the USB power supply is connected + * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected + */ +static int ab8500_charger_detect_chargers(struct ab8500_charger *di) +{ + int result = NO_PW_CONN; + int ret; + u8 val; + + /* Check for AC charger */ + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_STATUS1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + if (val & MAIN_CH_DET) + result = AC_PW_CONN; + + /* Check for USB charger */ + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) + result |= USB_PW_CONN; + + return result; +} + +/** + * ab8500_charger_max_usb_curr() - get the max curr for the USB type + * @di: pointer to the ab8500_charger structure + * @link_status: the identified USB type + * + * Get the maximum current that is allowed to be drawn from the host + * based on the USB type. + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, + enum ab8500_charger_link_status link_status) +{ + int ret = 0; + + switch (link_status) { + case USB_STAT_STD_HOST_NC: + case USB_STAT_STD_HOST_C_NS: + case USB_STAT_STD_HOST_C_S: + dev_dbg(di->dev, "USB Type - Standard host is " + "detected through USB driver\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + break; + case USB_STAT_HOST_CHG_HS_CHIRP: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + break; + case USB_STAT_HOST_CHG_HS: + case USB_STAT_ACA_RID_C_HS: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9; + break; + case USB_STAT_ACA_RID_A: + /* + * Dedicated charger level minus maximum current accessory + * can consume (300mA). Closest level is 1100mA + */ + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1; + break; + case USB_STAT_ACA_RID_B: + /* + * Dedicated charger level minus 120mA (20mA for ACA and + * 100mA for potential accessory). Closest level is 1300mA + */ + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3; + break; + case USB_STAT_DEDICATED_CHG: + case USB_STAT_HOST_CHG_NM: + case USB_STAT_ACA_RID_C_HS_CHIRP: + case USB_STAT_ACA_RID_C_NM: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; + break; + case USB_STAT_RESERVED: + /* + * This state is used to indicate that VBUS has dropped below + * the detection level 4 times in a row. This is due to the + * charger output current is set to high making the charger + * voltage collapse. This have to be propagated through to + * chargalg. This is done using the property + * POWER_SUPPLY_PROP_CURRENT_AVG = 1 + */ + di->flags.vbus_collapse = true; + dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED " + "VBUS has collapsed\n"); + ret = -1; + break; + case USB_STAT_HM_IDGND: + case USB_STAT_NOT_CONFIGURED: + case USB_STAT_NOT_VALID_LINK: + dev_err(di->dev, "USB Type - Charging not allowed\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + ret = -ENXIO; + break; + default: + dev_err(di->dev, "USB Type - Unknown\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + ret = -ENXIO; + break; + }; + + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", + link_status, di->max_usb_in_curr); + + return ret; +} + +/** + * ab8500_charger_read_usb_type() - read the type of usb connected + * @di: pointer to the ab8500_charger structure + * + * Detect the type of the plugged USB + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_read_usb_type(struct ab8500_charger *di) +{ + int ret; + u8 val; + + ret = abx500_get_register_interruptible(di->dev, + AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + /* get the USB type */ + val = (val & AB8500_USB_LINK_STATUS) >> 3; + ret = ab8500_charger_max_usb_curr(di, + (enum ab8500_charger_link_status) val); + + return ret; +} + +/** + * ab8500_charger_detect_usb_type() - get the type of usb connected + * @di: pointer to the ab8500_charger structure + * + * Detect the type of the plugged USB + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) +{ + int i, ret; + u8 val; + + /* + * On getting the VBUS rising edge detect interrupt there + * is a 250ms delay after which the register UsbLineStatus + * is filled with valid data. + */ + for (i = 0; i < 10; i++) { + msleep(250); + ret = abx500_get_register_interruptible(di->dev, + AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, + &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + /* + * Until the IT source register is read the UsbLineStatus + * register is not updated, hence doing the same + * Revisit this: + */ + + /* get the USB type */ + val = (val & AB8500_USB_LINK_STATUS) >> 3; + if (val) + break; + } + ret = ab8500_charger_max_usb_curr(di, + (enum ab8500_charger_link_status) val); + + return ret; +} + +/* + * This array maps the raw hex value to charger voltage used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_voltage_map[] = { + 3500 , + 3525 , + 3550 , + 3575 , + 3600 , + 3625 , + 3650 , + 3675 , + 3700 , + 3725 , + 3750 , + 3775 , + 3800 , + 3825 , + 3850 , + 3875 , + 3900 , + 3925 , + 3950 , + 3975 , + 4000 , + 4025 , + 4050 , + 4060 , + 4070 , + 4080 , + 4090 , + 4100 , + 4110 , + 4120 , + 4130 , + 4140 , + 4150 , + 4160 , + 4170 , + 4180 , + 4190 , + 4200 , + 4210 , + 4220 , + 4230 , + 4240 , + 4250 , + 4260 , + 4270 , + 4280 , + 4290 , + 4300 , + 4310 , + 4320 , + 4330 , + 4340 , + 4350 , + 4360 , + 4370 , + 4380 , + 4390 , + 4400 , + 4410 , + 4420 , + 4430 , + 4440 , + 4450 , + 4460 , + 4470 , + 4480 , + 4490 , + 4500 , + 4510 , + 4520 , + 4530 , + 4540 , + 4550 , + 4560 , + 4570 , + 4580 , + 4590 , + 4600 , +}; + +/* + * This array maps the raw hex value to charger current used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_current_map[] = { + 100 , + 200 , + 300 , + 400 , + 500 , + 600 , + 700 , + 800 , + 900 , + 1000 , + 1100 , + 1200 , + 1300 , + 1400 , + 1500 , +}; + +/* + * This array maps the raw hex value to VBUS input current used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_vbus_in_curr_map[] = { + USB_CH_IP_CUR_LVL_0P05, + USB_CH_IP_CUR_LVL_0P09, + USB_CH_IP_CUR_LVL_0P19, + USB_CH_IP_CUR_LVL_0P29, + USB_CH_IP_CUR_LVL_0P38, + USB_CH_IP_CUR_LVL_0P45, + USB_CH_IP_CUR_LVL_0P5, + USB_CH_IP_CUR_LVL_0P6, + USB_CH_IP_CUR_LVL_0P7, + USB_CH_IP_CUR_LVL_0P8, + USB_CH_IP_CUR_LVL_0P9, + USB_CH_IP_CUR_LVL_1P0, + USB_CH_IP_CUR_LVL_1P1, + USB_CH_IP_CUR_LVL_1P3, + USB_CH_IP_CUR_LVL_1P4, + USB_CH_IP_CUR_LVL_1P5, +}; + +static int ab8500_voltage_to_regval(int voltage) +{ + int i; + + /* Special case for voltage below 3.5V */ + if (voltage < ab8500_charger_voltage_map[0]) + return LOW_VOLT_REG; + + for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) { + if (voltage < ab8500_charger_voltage_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1; + if (voltage == ab8500_charger_voltage_map[i]) + return i; + else + return -1; +} + +static int ab8500_current_to_regval(int curr) +{ + int i; + + if (curr < ab8500_charger_current_map[0]) + return 0; + + for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) { + if (curr < ab8500_charger_current_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_current_map) - 1; + if (curr == ab8500_charger_current_map[i]) + return i; + else + return -1; +} + +static int ab8500_vbus_in_curr_to_regval(int curr) +{ + int i; + + if (curr < ab8500_charger_vbus_in_curr_map[0]) + return 0; + + for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) { + if (curr < ab8500_charger_vbus_in_curr_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1; + if (curr == ab8500_charger_vbus_in_curr_map[i]) + return i; + else + return -1; +} + +/** + * ab8500_charger_get_usb_cur() - get usb current + * @di: pointer to the ab8500_charger structre + * + * The usb stack provides the maximum current that can be drawn from + * the standard usb host. This will be in mA. + * This function converts current in mA to a value that can be written + * to the register. Returns -1 if charging is not allowed + */ +static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) +{ + switch (di->usb_state.usb_current) { + case 100: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + break; + case 200: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19; + break; + case 300: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29; + break; + case 400: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38; + break; + case 500: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + break; + default: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + return -1; + break; + }; + return 0; +} + +/** + * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit + * @di: pointer to the ab8500_charger structure + * @ich_in: charger input current limit + * + * Sets the current that can be drawn from the USB host + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, + int ich_in) +{ + int ret; + int input_curr_index; + int min_value; + + /* We should always use to lowest current limit */ + min_value = min(di->bat->chg_params->usb_curr_max, ich_in); + + switch (min_value) { + case 100: + if (di->vbat < VBAT_TRESH_IP_CUR_RED) + min_value = USB_CH_IP_CUR_LVL_0P05; + break; + case 500: + if (di->vbat < VBAT_TRESH_IP_CUR_RED) + min_value = USB_CH_IP_CUR_LVL_0P45; + break; + default: + break; + } + + input_curr_index = ab8500_vbus_in_curr_to_regval(min_value); + if (input_curr_index < 0) { + dev_err(di->dev, "VBUS input current limit too high\n"); + return -ENXIO; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_IPT_CRNTLVL_REG, + input_curr_index << VBUS_IN_CURR_LIM_SHIFT); + if (ret) + dev_err(di->dev, "%s write failed\n", __func__); + + return ret; +} + +/** + * ab8500_charger_led_en() - turn on/off chargign led + * @di: pointer to the ab8500_charger structure + * @on: flag to turn on/off the chargign led + * + * Power ON/OFF charging LED indication + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_led_en(struct ab8500_charger *di, int on) +{ + int ret; + + if (on) { + /* Power ON charging LED indicator, set LED current to 5mA */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_CTRL, + (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA)); + if (ret) { + dev_err(di->dev, "Power ON LED failed\n"); + return ret; + } + /* LED indicator PWM duty cycle 252/256 */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_DUTY, + LED_INDICATOR_PWM_DUTY_252_256); + if (ret) { + dev_err(di->dev, "Set LED PWM duty cycle failed\n"); + return ret; + } + } else { + /* Power off charging LED indicator */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_CTRL, + LED_INDICATOR_PWM_DIS); + if (ret) { + dev_err(di->dev, "Power-off LED failed\n"); + return ret; + } + } + + return ret; +} + +/** + * ab8500_charger_ac_en() - enable or disable ac charging + * @di: pointer to the ab8500_charger structure + * @enable: enable/disable flag + * @vset: charging voltage + * @iset: charging current + * + * Enable/Disable AC/Mains charging and turns on/off the charging led + * respectively. + **/ +static int ab8500_charger_ac_en(struct ux500_charger *charger, + int enable, int vset, int iset) +{ + int ret; + int volt_index; + int curr_index; + int input_curr_index; + u8 overshoot = 0; + + struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); + + if (enable) { + /* Check if AC is connected */ + if (!di->ac.charger_connected) { + dev_err(di->dev, "AC charger not connected\n"); + return -ENXIO; + } + + /* Enable AC charging */ + dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset); + + /* + * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts + * will be triggered everytime we enable the VDD ADC supply. + * This will turn off charging for a short while. + * It can be avoided by having the supply on when + * there is a charger enabled. Normally the VDD ADC supply + * is enabled everytime a GPADC conversion is triggered. We will + * force it to be enabled from this driver to have + * the GPADC module independant of the AB8500 chargers + */ + if (!di->vddadc_en_ac) { + regulator_enable(di->regu); + di->vddadc_en_ac = true; + } + + /* Check if the requested voltage or current is valid */ + volt_index = ab8500_voltage_to_regval(vset); + curr_index = ab8500_current_to_regval(iset); + input_curr_index = ab8500_current_to_regval( + di->bat->chg_params->ac_curr_max); + if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { + dev_err(di->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + /* ChVoltLevel: maximum battery charging voltage */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, (u8) volt_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* MainChInputCurr: current that can be drawn from the charger*/ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_IPT_CURLVL_REG, + input_curr_index << MAIN_CH_INPUT_CURR_SHIFT); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Check if VBAT overshoot control should be enabled */ + if (!di->bat->enable_overshoot) + overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; + + /* Enable Main Charger */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Power on charging LED indication */ + ret = ab8500_charger_led_en(di, true); + if (ret < 0) + dev_err(di->dev, "failed to enable LED\n"); + + di->ac.charger_online = 1; + } else { + /* Disable AC charging */ + if (is_ab8500_1p1_or_earlier(di->parent)) { + /* + * For ABB revision 1.0 and 1.1 there is a bug in the + * watchdog logic. That means we have to continously + * kick the charger watchdog even when no charger is + * connected. This is only valid once the AC charger + * has been enabled. This is a bug that is not handled + * by the algorithm and the watchdog have to be kicked + * by the charger driver when the AC charger + * is disabled + */ + if (di->ac_conn) { + queue_delayed_work(di->charger_wq, + &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); + } + + /* + * We can't turn off charging completely + * due to a bug in AB8500 cut1. + * If we do, charging will not start again. + * That is why we set the lowest voltage + * and current possible + */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + } else { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_MCH_CTRL1, 0); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) + dev_err(di->dev, "failed to disable LED\n"); + + di->ac.charger_online = 0; + di->ac.wd_expired = false; + + /* Disable regulator if enabled */ + if (di->vddadc_en_ac) { + regulator_disable(di->regu); + di->vddadc_en_ac = false; + } + + dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); + } + ab8500_power_supply_changed(di, &di->ac_chg.psy); + + return ret; +} + +/** + * ab8500_charger_usb_en() - enable usb charging + * @di: pointer to the ab8500_charger structure + * @enable: enable/disable flag + * @vset: charging voltage + * @ich_out: charger output current + * + * Enable/Disable USB charging and turns on/off the charging led respectively. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_usb_en(struct ux500_charger *charger, + int enable, int vset, int ich_out) +{ + int ret; + int volt_index; + int curr_index; + u8 overshoot = 0; + + struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); + + if (enable) { + /* Check if USB is connected */ + if (!di->usb.charger_connected) { + dev_err(di->dev, "USB charger not connected\n"); + return -ENXIO; + } + + /* + * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts + * will be triggered everytime we enable the VDD ADC supply. + * This will turn off charging for a short while. + * It can be avoided by having the supply on when + * there is a charger enabled. Normally the VDD ADC supply + * is enabled everytime a GPADC conversion is triggered. We will + * force it to be enabled from this driver to have + * the GPADC module independant of the AB8500 chargers + */ + if (!di->vddadc_en_usb) { + regulator_enable(di->regu); + di->vddadc_en_usb = true; + } + + /* Enable USB charging */ + dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out); + + /* Check if the requested voltage or current is valid */ + volt_index = ab8500_voltage_to_regval(vset); + curr_index = ab8500_current_to_regval(ich_out); + if (volt_index < 0 || curr_index < 0) { + dev_err(di->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + /* ChVoltLevel: max voltage upto which battery can be charged */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, (u8) volt_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* Check if VBAT overshoot control should be enabled */ + if (!di->bat->enable_overshoot) + overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; + + /* Enable USB Charger */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* If success power on charging LED indication */ + ret = ab8500_charger_led_en(di, true); + if (ret < 0) + dev_err(di->dev, "failed to enable LED\n"); + + queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); + + di->usb.charger_online = 1; + } else { + /* Disable USB charging */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, 0); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) + dev_err(di->dev, "failed to disable LED\n"); + + di->usb.charger_online = 0; + di->usb.wd_expired = false; + + /* Disable regulator if enabled */ + if (di->vddadc_en_usb) { + regulator_disable(di->regu); + di->vddadc_en_usb = false; + } + + dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); + + /* Cancel any pending Vbat check work */ + if (delayed_work_pending(&di->check_vbat_work)) + cancel_delayed_work(&di->check_vbat_work); + + } + ab8500_power_supply_changed(di, &di->usb_chg.psy); + + return ret; +} + +/** + * ab8500_charger_watchdog_kick() - kick charger watchdog + * @di: pointer to the ab8500_charger structure + * + * Kick charger watchdog + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_watchdog_kick(struct ux500_charger *charger) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) + di = to_ab8500_charger_ac_device_info(charger); + else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + return ret; +} + +/** + * ab8500_charger_update_charger_current() - update charger current + * @di: pointer to the ab8500_charger structure + * + * Update the charger output current for the specified charger + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_update_charger_current(struct ux500_charger *charger, + int ich_out) +{ + int ret; + int curr_index; + struct ab8500_charger *di; + + if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) + di = to_ab8500_charger_ac_device_info(charger); + else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + curr_index = ab8500_current_to_regval(ich_out); + if (curr_index < 0) { + dev_err(di->dev, + "Charger current too high, " + "charging not started\n"); + return -ENXIO; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Reset the main and usb drop input current measurement counter */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARGER_CTRL, + 0x1); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + return ret; +} + +static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_charger *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + struct ux500_charger *usb_chg; + + usb_chg = (struct ux500_charger *)data; + psy = &usb_chg->psy; + + di = to_ab8500_charger_usb_device_info(usb_chg); + + ext = dev_get_drvdata(dev); + + /* For all psy where the driver name appears in any supplied_to */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + if (ext->get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->vbat = ret.intval / 1000; + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_charger_check_vbat_work() - keep vbus current within spec + * @work pointer to the work_struct structure + * + * Due to a asic bug it is necessary to lower the input current to the vbus + * charger when charging with at some specific levels. This issue is only valid + * for below a certain battery voltage. This function makes sure that the + * the allowed current limit isn't exceeded. + */ +static void ab8500_charger_check_vbat_work(struct work_struct *work) +{ + int t = 10; + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_vbat_work.work); + + class_for_each_device(power_supply_class, NULL, + &di->usb_chg.psy, ab8500_charger_get_ext_psy_data); + + /* First run old_vbat is 0. */ + if (di->old_vbat == 0) + di->old_vbat = di->vbat; + + if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED && + di->vbat <= VBAT_TRESH_IP_CUR_RED) || + (di->old_vbat > VBAT_TRESH_IP_CUR_RED && + di->vbat > VBAT_TRESH_IP_CUR_RED))) { + + dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," + " old: %d\n", di->max_usb_in_curr, di->vbat, + di->old_vbat); + ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + power_supply_changed(&di->usb_chg.psy); + } + + di->old_vbat = di->vbat; + + /* + * No need to check the battery voltage every second when not close to + * the threshold. + */ + if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && + (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) + t = 1; + + queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); +} + +/** + * ab8500_charger_check_hw_failure_work() - check main charger failure + * @work: pointer to the work_struct structure + * + * Work queue function for checking the main charger status + */ +static void ab8500_charger_check_hw_failure_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_hw_failure_work.work); + + /* Check if the status bits for HW failure is still active */ + if (di->flags.mainextchnotok) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (!(reg_value & MAIN_CH_NOK)) { + di->flags.mainextchnotok = false; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + } + } + if (di->flags.vbus_ovv) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, + ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (!(reg_value & VBUS_OVV_TH)) { + di->flags.vbus_ovv = false; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + } + /* If we still have a failure, schedule a new check */ + if (di->flags.mainextchnotok || di->flags.vbus_ovv) { + queue_delayed_work(di->charger_wq, + &di->check_hw_failure_work, round_jiffies(HZ)); + } +} + +/** + * ab8500_charger_kick_watchdog_work() - kick the watchdog + * @work: pointer to the work_struct structure + * + * Work queue function for kicking the charger watchdog. + * + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ +static void ab8500_charger_kick_watchdog_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, kick_wd_work.work); + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + /* Schedule a new watchdog kick */ + queue_delayed_work(di->charger_wq, + &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL)); +} + +/** + * ab8500_charger_ac_work() - work to get and set main charger status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the main charger status + */ +static void ab8500_charger_ac_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, ac_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if the main charger is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (ret & AC_PW_CONN) { + di->ac.charger_connected = 1; + di->ac_conn = true; + } else { + di->ac.charger_connected = 0; + } + + ab8500_power_supply_changed(di, &di->ac_chg.psy); + sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); +} + +/** + * ab8500_charger_detect_usb_type_work() - work to detect USB type + * @work: Pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_detect_usb_type_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, detect_usb_type_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (!(ret & USB_PW_CONN)) { + di->vbus_detected = 0; + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else { + di->vbus_detected = 1; + + if (is_ab8500_1p1_or_earlier(di->parent)) { + ret = ab8500_charger_detect_usb_type(di); + if (!ret) { + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, + &di->usb_chg.psy); + } + } else { + /* For ABB cut2.0 and onwards we have an IRQ, + * USB_LINK_STATUS that will be triggered when the USB + * link status changes. The exception is USB connected + * during startup. Then we don't get a + * USB_LINK_STATUS IRQ + */ + if (di->vbus_detected_start) { + di->vbus_detected_start = false; + ret = ab8500_charger_detect_usb_type(di); + if (!ret) { + ab8500_charger_set_usb_connected(di, + true); + ab8500_power_supply_changed(di, + &di->usb_chg.psy); + } + } + } + } +} + +/** + * ab8500_charger_usb_link_status_work() - work to detect USB type + * @work: pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_usb_link_status_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, usb_link_status_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (!(ret & USB_PW_CONN)) { + di->vbus_detected = 0; + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else { + di->vbus_detected = 1; + ret = ab8500_charger_read_usb_type(di); + if (!ret) { + /* Update maximum input current */ + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr); + if (ret) + return; + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else if (ret == -ENXIO) { + /* No valid charger type detected */ + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + } +} + +static void ab8500_charger_usb_state_changed_work(struct work_struct *work) +{ + int ret; + unsigned long flags; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, usb_state_changed_work); + + if (!di->vbus_detected) + return; + + spin_lock_irqsave(&di->usb_state.usb_lock, flags); + di->usb_state.usb_changed = false; + spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); + + /* + * wait for some time until you get updates from the usb stack + * and negotiations are completed + */ + msleep(250); + + if (di->usb_state.usb_changed) + return; + + dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", + __func__, di->usb_state.state, di->usb_state.usb_current); + + switch (di->usb_state.state) { + case AB8500_BM_USB_STATE_RESET_HS: + case AB8500_BM_USB_STATE_RESET_FS: + case AB8500_BM_USB_STATE_SUSPEND: + case AB8500_BM_USB_STATE_MAX: + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + break; + + case AB8500_BM_USB_STATE_RESUME: + /* + * when suspend->resume there should be delay + * of 1sec for enabling charging + */ + msleep(1000); + /* Intentional fall through */ + case AB8500_BM_USB_STATE_CONFIGURED: + /* + * USB is configured, enable charging with the charging + * input current obtained from USB driver + */ + if (!ab8500_charger_get_usb_cur(di)) { + /* Update maximum input current */ + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr); + if (ret) + return; + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + break; + + default: + break; + }; +} + +/** + * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the USB charger Not OK status + */ +static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + bool prev_status; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_usbchgnotok_work.work); + + /* Check if the status bit for usbchargernotok is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + prev_status = di->flags.usbchargernotok; + + if (reg_value & VBUS_CH_NOK) { + di->flags.usbchargernotok = true; + /* Check again in 1sec */ + queue_delayed_work(di->charger_wq, + &di->check_usbchgnotok_work, HZ); + } else { + di->flags.usbchargernotok = false; + di->flags.vbus_collapse = false; + } + + if (prev_status != di->flags.usbchargernotok) + ab8500_power_supply_changed(di, &di->usb_chg.psy); +} + +/** + * ab8500_charger_check_main_thermal_prot_work() - check main thermal status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the Main thermal prot status + */ +static void ab8500_charger_check_main_thermal_prot_work( + struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_main_thermal_prot_work); + + /* Check if the status bit for main_thermal_prot is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (reg_value & MAIN_CH_TH_PROT) + di->flags.main_thermal_prot = true; + else + di->flags.main_thermal_prot = false; + + ab8500_power_supply_changed(di, &di->ac_chg.psy); +} + +/** + * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the USB thermal prot status + */ +static void ab8500_charger_check_usb_thermal_prot_work( + struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_usb_thermal_prot_work); + + /* Check if the status bit for usb_thermal_prot is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (reg_value & USB_CH_TH_PROT) + di->flags.usb_thermal_prot = true; + else + di->flags.usb_thermal_prot = false; + + ab8500_power_supply_changed(di, &di->usb_chg.psy); +} + +/** + * ab8500_charger_mainchunplugdet_handler() - main charger unplugged + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger unplugged\n"); + queue_work(di->charger_wq, &di->ac_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchplugdet_handler() - main charger plugged + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger plugged\n"); + queue_work(di->charger_wq, &di->ac_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainextchnotok_handler() - main charger not ok + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger not ok\n"); + di->flags.mainextchnotok = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp above Main charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_main_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp ok for Main charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_main_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusdetf_handler() - VBUS falling detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS falling detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusdetr_handler() - VBUS rising detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + di->vbus_detected = true; + dev_dbg(di->dev, "VBUS rising detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usblinkstatus_handler() - USB link status has changed + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "USB link status changed\n"); + + queue_work(di->charger_wq, &di->usb_link_status_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp above USB charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp ok for USB charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Not allowed USB charger detected\n"); + queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_chwdexp_handler() - Charger watchdog expired + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Charger watchdog expired\n"); + + /* + * The charger that was online when the watchdog expired + * needs to be restarted for charging to start again + */ + if (di->ac.charger_online) { + di->ac.wd_expired = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + } + if (di->usb.charger_online) { + di->usb.wd_expired = true; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS overvoltage detected\n"); + di->flags.vbus_ovv = true; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_ac_get_property() - get the ac/mains properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the ac/mains + * properties by reading the sysfs files. + * AC/Mains properties are online, present and voltage. + * online: ac/mains charging is in progress or not + * present: presence of the ac/mains + * voltage: AC/Mains voltage + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_charger *di; + + di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (di->flags.mainextchnotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (di->ac.wd_expired || di->usb.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (di->flags.main_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = di->ac.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->ac.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di); + val->intval = di->ac.charger_voltage * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* + * This property is used to indicate when CV mode is entered + * for the AC charger + */ + di->ac.cv_active = ab8500_charger_ac_cv(di); + val->intval = di->ac.cv_active; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = ab8500_charger_get_ac_current(di) * 1000; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * ab8500_charger_usb_get_property() - get the usb properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the usb + * properties by reading the sysfs files. + * USB properties are online, present and voltage. + * online: usb charging is in progress or not + * present: presence of the usb + * voltage: vbus voltage + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_charger *di; + + di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (di->flags.usbchargernotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (di->ac.wd_expired || di->usb.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (di->flags.usb_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (di->flags.vbus_ovv) + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = di->usb.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->usb.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di); + val->intval = di->usb.charger_voltage * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* + * This property is used to indicate when CV mode is entered + * for the USB charger + */ + di->usb.cv_active = ab8500_charger_usb_cv(di); + val->intval = di->usb.cv_active; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = ab8500_charger_get_usb_current(di) * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + /* + * This property is used to indicate when VBUS has collapsed + * due to too high output current from the USB charger + */ + if (di->flags.vbus_collapse) + val->intval = 1; + else + val->intval = 0; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * ab8500_charger_init_hw_registers() - Set up charger related registers + * @di: pointer to the ab8500_charger structure + * + * Set up charger OVV, watchdog and maximum voltage registers as well as + * charging of the backup battery + */ +static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) +{ + int ret = 0; + + /* Setup maximum charger current and voltage for ABB cut2.0 */ + if (!is_ab8500_1p1_or_earlier(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6); + if (ret) { + dev_err(di->dev, + "failed to set CH_VOLT_LVL_MAX_REG\n"); + goto out; + } + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6); + if (ret) { + dev_err(di->dev, + "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); + goto out; + } + } + + /* VBUS OVV set to 6.3V and enable automatic current limitiation */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL2_REG, + VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); + if (ret) { + dev_err(di->dev, "failed to set VBUS OVV\n"); + goto out; + } + + /* Enable main watchdog in OTP */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD); + if (ret) { + dev_err(di->dev, "failed to enable main WD in OTP\n"); + goto out; + } + + /* Enable main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA); + if (ret) { + dev_err(di->dev, "faile to enable main watchdog\n"); + goto out; + } + + /* + * Due to internal synchronisation, Enable and Kick watchdog bits + * cannot be enabled in a single write. + * A minimum delay of 2*32 kHz period (62.5µs) must be inserted + * between writing Enable then Kick bits. + */ + udelay(63); + + /* Kick main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, + (MAIN_WDOG_ENA | MAIN_WDOG_KICK)); + if (ret) { + dev_err(di->dev, "failed to kick main watchdog\n"); + goto out; + } + + /* Disable main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS); + if (ret) { + dev_err(di->dev, "failed to disable main watchdog\n"); + goto out; + } + + /* Set watchdog timeout */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_WD_TIMER_REG, WD_TIMER); + if (ret) { + dev_err(di->dev, "failed to set charger watchdog timeout\n"); + goto out; + } + + /* Backup battery voltage and current */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_RTC, + AB8500_RTC_BACKUP_CHG_REG, + di->bat->bkup_bat_v | + di->bat->bkup_bat_i); + if (ret) { + dev_err(di->dev, "failed to setup backup battery charging\n"); + goto out; + } + + /* Enable backup battery charging */ + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_RTC, AB8500_RTC_CTRL_REG, + RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); + if (ret < 0) + dev_err(di->dev, "%s mask and set failed\n", __func__); + +out: + return ret; +} + +/* + * ab8500 charger driver interrupts and their respective isr + */ +static struct ab8500_charger_interrupts ab8500_charger_irq[] = { + {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler}, + {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler}, + {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler}, + {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler}, + {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler}, + {"VBUS_DET_F", ab8500_charger_vbusdetf_handler}, + {"VBUS_DET_R", ab8500_charger_vbusdetr_handler}, + {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler}, + {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler}, + {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler}, + {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, + {"VBUS_OVV", ab8500_charger_vbusovv_handler}, + {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, +}; + +static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, + unsigned long event, void *power) +{ + struct ab8500_charger *di = + container_of(nb, struct ab8500_charger, nb); + enum ab8500_usb_state bm_usb_state; + unsigned mA = *((unsigned *)power); + + if (event != USB_EVENT_VBUS) { + dev_dbg(di->dev, "not a standard host, returning\n"); + return NOTIFY_DONE; + } + + /* TODO: State is fabricate here. See if charger really needs USB + * state or if mA is enough + */ + if ((di->usb_state.usb_current == 2) && (mA > 2)) + bm_usb_state = AB8500_BM_USB_STATE_RESUME; + else if (mA == 0) + bm_usb_state = AB8500_BM_USB_STATE_RESET_HS; + else if (mA == 2) + bm_usb_state = AB8500_BM_USB_STATE_SUSPEND; + else if (mA >= 8) /* 8, 100, 500 */ + bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED; + else /* Should never occur */ + bm_usb_state = AB8500_BM_USB_STATE_RESET_FS; + + dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n", + __func__, bm_usb_state, mA); + + spin_lock(&di->usb_state.usb_lock); + di->usb_state.usb_changed = true; + spin_unlock(&di->usb_state.usb_lock); + + di->usb_state.state = bm_usb_state; + di->usb_state.usb_current = mA; + + queue_work(di->charger_wq, &di->usb_state_changed_work); + + return NOTIFY_OK; +} + +#if defined(CONFIG_PM) +static int ab8500_charger_resume(struct platform_device *pdev) +{ + int ret; + struct ab8500_charger *di = platform_get_drvdata(pdev); + + /* + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ + if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + /* If not already pending start a new timer */ + if (!delayed_work_pending( + &di->kick_wd_work)) { + queue_delayed_work(di->charger_wq, &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); + } + } + + /* If we still have a HW failure, schedule a new check */ + if (di->flags.mainextchnotok || di->flags.vbus_ovv) { + queue_delayed_work(di->charger_wq, + &di->check_hw_failure_work, 0); + } + + return 0; +} + +static int ab8500_charger_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_charger *di = platform_get_drvdata(pdev); + + /* Cancel any pending HW failure check */ + if (delayed_work_pending(&di->check_hw_failure_work)) + cancel_delayed_work(&di->check_hw_failure_work); + + return 0; +} +#else +#define ab8500_charger_suspend NULL +#define ab8500_charger_resume NULL +#endif + +static int __devexit ab8500_charger_remove(struct platform_device *pdev) +{ + struct ab8500_charger *di = platform_get_drvdata(pdev); + int i, irq, ret; + + /* Disable AC charging */ + ab8500_charger_ac_en(&di->ac_chg, false, 0, 0); + + /* Disable USB charging */ + ab8500_charger_usb_en(&di->usb_chg, false, 0, 0); + + /* Disable interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + free_irq(irq, di); + } + + /* disable the regulator */ + regulator_put(di->regu); + + /* Backup battery voltage and current disable */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); + if (ret < 0) + dev_err(di->dev, "%s mask and set failed\n", __func__); + + usb_unregister_notifier(di->usb_phy, &di->nb); + usb_put_transceiver(di->usb_phy); + + /* Delete the work queue */ + destroy_workqueue(di->charger_wq); + + flush_scheduled_work(); + power_supply_unregister(&di->usb_chg.psy); + power_supply_unregister(&di->ac_chg.psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + + return 0; +} + +static int __devinit ab8500_charger_probe(struct platform_device *pdev) +{ + int irq, i, charger_status, ret = 0; + struct abx500_bm_plat_data *plat_data; + + struct ab8500_charger *di = + kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL); + if (!di) + return -ENOMEM; + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* initialize lock */ + spin_lock_init(&di->usb_state.usb_lock); + + /* get charger specific platform data */ + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->charger; + + if (!di->pdata) { + dev_err(di->dev, "no charger platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* get battery specific platform data */ + di->bat = plat_data->battery; + if (!di->bat) { + dev_err(di->dev, "no battery platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + di->autopower = false; + + /* AC supply */ + /* power_supply base class */ + di->ac_chg.psy.name = "ab8500_ac"; + di->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS; + di->ac_chg.psy.properties = ab8500_charger_ac_props; + di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props); + di->ac_chg.psy.get_property = ab8500_charger_ac_get_property; + di->ac_chg.psy.supplied_to = di->pdata->supplied_to; + di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants; + /* ux500_charger sub-class */ + di->ac_chg.ops.enable = &ab8500_charger_ac_en; + di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; + di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ + ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; + di->ac_chg.max_out_curr = ab8500_charger_current_map[ + ARRAY_SIZE(ab8500_charger_current_map) - 1]; + + /* USB supply */ + /* power_supply base class */ + di->usb_chg.psy.name = "ab8500_usb"; + di->usb_chg.psy.type = POWER_SUPPLY_TYPE_USB; + di->usb_chg.psy.properties = ab8500_charger_usb_props; + di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props); + di->usb_chg.psy.get_property = ab8500_charger_usb_get_property; + di->usb_chg.psy.supplied_to = di->pdata->supplied_to; + di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants; + /* ux500_charger sub-class */ + di->usb_chg.ops.enable = &ab8500_charger_usb_en; + di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; + di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ + ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; + di->usb_chg.max_out_curr = ab8500_charger_current_map[ + ARRAY_SIZE(ab8500_charger_current_map) - 1]; + + + /* Create a work queue for the charger */ + di->charger_wq = + create_singlethread_workqueue("ab8500_charger_wq"); + if (di->charger_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for HW failure check */ + INIT_DELAYED_WORK_DEFERRABLE(&di->check_hw_failure_work, + ab8500_charger_check_hw_failure_work); + INIT_DELAYED_WORK_DEFERRABLE(&di->check_usbchgnotok_work, + ab8500_charger_check_usbchargernotok_work); + + /* + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ + INIT_DELAYED_WORK_DEFERRABLE(&di->kick_wd_work, + ab8500_charger_kick_watchdog_work); + + INIT_DELAYED_WORK_DEFERRABLE(&di->check_vbat_work, + ab8500_charger_check_vbat_work); + + /* Init work for charger detection */ + INIT_WORK(&di->usb_link_status_work, + ab8500_charger_usb_link_status_work); + INIT_WORK(&di->ac_work, ab8500_charger_ac_work); + INIT_WORK(&di->detect_usb_type_work, + ab8500_charger_detect_usb_type_work); + + INIT_WORK(&di->usb_state_changed_work, + ab8500_charger_usb_state_changed_work); + + /* Init work for checking HW status */ + INIT_WORK(&di->check_main_thermal_prot_work, + ab8500_charger_check_main_thermal_prot_work); + INIT_WORK(&di->check_usb_thermal_prot_work, + ab8500_charger_check_usb_thermal_prot_work); + + /* + * VDD ADC supply needs to be enabled from this driver when there + * is a charger connected to avoid erroneous BTEMP_HIGH/LOW + * interrupts during charging + */ + di->regu = regulator_get(di->dev, "vddadc"); + if (IS_ERR(di->regu)) { + ret = PTR_ERR(di->regu); + dev_err(di->dev, "failed to get vddadc regulator\n"); + goto free_charger_wq; + } + + + /* Initialize OVV, and other registers */ + ret = ab8500_charger_init_hw_registers(di); + if (ret) { + dev_err(di->dev, "failed to initialize ABB registers\n"); + goto free_regulator; + } + + /* Register AC charger class */ + ret = power_supply_register(di->dev, &di->ac_chg.psy); + if (ret) { + dev_err(di->dev, "failed to register AC charger\n"); + goto free_regulator; + } + + /* Register USB charger class */ + ret = power_supply_register(di->dev, &di->usb_chg.psy); + if (ret) { + dev_err(di->dev, "failed to register USB charger\n"); + goto free_ac; + } + + di->usb_phy = usb_get_transceiver(); + if (!di->usb_phy) { + dev_err(di->dev, "failed to get usb transceiver\n"); + ret = -EINVAL; + goto free_usb; + } + di->nb.notifier_call = ab8500_charger_usb_notifier_call; + ret = usb_register_notifier(di->usb_phy, &di->nb); + if (ret) { + dev_err(di->dev, "failed to register usb notifier\n"); + goto put_usb_phy; + } + + /* Identify the connected charger types during startup */ + charger_status = ab8500_charger_detect_chargers(di); + if (charger_status & AC_PW_CONN) { + di->ac.charger_connected = 1; + di->ac_conn = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); + } + + if (charger_status & USB_PW_CONN) { + dev_dbg(di->dev, "VBUS Detect during startup\n"); + di->vbus_detected = true; + di->vbus_detected_start = true; + queue_work(di->charger_wq, + &di->detect_usb_type_work); + } + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_charger_irq[i].name, di); + + if (ret != 0) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_charger_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_charger_irq[i].name, irq, ret); + } + + platform_set_drvdata(pdev, di); + + return ret; + +free_irq: + usb_unregister_notifier(di->usb_phy, &di->nb); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + free_irq(irq, di); + } +put_usb_phy: + usb_put_transceiver(di->usb_phy); +free_usb: + power_supply_unregister(&di->usb_chg.psy); +free_ac: + power_supply_unregister(&di->ac_chg.psy); +free_regulator: + regulator_put(di->regu); +free_charger_wq: + destroy_workqueue(di->charger_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver ab8500_charger_driver = { + .probe = ab8500_charger_probe, + .remove = __devexit_p(ab8500_charger_remove), + .suspend = ab8500_charger_suspend, + .resume = ab8500_charger_resume, + .driver = { + .name = "ab8500-charger", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_charger_init(void) +{ + return platform_driver_register(&ab8500_charger_driver); +} + +static void __exit ab8500_charger_exit(void) +{ + platform_driver_unregister(&ab8500_charger_driver); +} + +subsys_initcall_sync(ab8500_charger_init); +module_exit(ab8500_charger_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); +MODULE_ALIAS("platform:ab8500-charger"); +MODULE_DESCRIPTION("AB8500 charger management driver"); diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c new file mode 100644 index 0000000..c22f2f0 --- /dev/null +++ b/drivers/power/ab8500_fg.c @@ -0,0 +1,2637 @@ +/* + * Copyright (C) ST-Ericsson AB 2012 + * + * Main and Back-up battery management driver. + * + * Note: Backup battery management is required in case of Li-Ion battery and not + * for capacitive battery. HREF boards have capacitive battery and hence backup + * battery management is not used and the supported code is available in this + * driver. + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/kobject.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500.h> +#include <linux/slab.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/delay.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/mfd/abx500.h> +#include <linux/time.h> +#include <linux/completion.h> + +#define MILLI_TO_MICRO 1000 +#define FG_LSB_IN_MA 1627 +#define QLSB_NANO_AMP_HOURS_X10 1129 +#define INS_CURR_TIMEOUT (3 * HZ) + +#define SEC_TO_SAMPLE(S) (S * 4) + +#define NBR_AVG_SAMPLES 20 + +#define LOW_BAT_CHECK_INTERVAL (2 * HZ) + +#define VALID_CAPACITY_SEC (45 * 60) /* 45 minutes */ +#define BATT_OK_MIN 2360 /* mV */ +#define BATT_OK_INCREMENT 50 /* mV */ +#define BATT_OK_MAX_NR_INCREMENTS 0xE + +/* FG constants */ +#define BATT_OVV 0x01 + +#define interpolate(x, x1, y1, x2, y2) \ + ((y1) + ((((y2) - (y1)) * ((x) - (x1))) / ((x2) - (x1)))); + +#define to_ab8500_fg_device_info(x) container_of((x), \ + struct ab8500_fg, fg_psy); + +/** + * struct ab8500_fg_interrupts - ab8500 fg interupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_fg_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +enum ab8500_fg_discharge_state { + AB8500_FG_DISCHARGE_INIT, + AB8500_FG_DISCHARGE_INITMEASURING, + AB8500_FG_DISCHARGE_INIT_RECOVERY, + AB8500_FG_DISCHARGE_RECOVERY, + AB8500_FG_DISCHARGE_READOUT_INIT, + AB8500_FG_DISCHARGE_READOUT, + AB8500_FG_DISCHARGE_WAKEUP, +}; + +static char *discharge_state[] = { + "DISCHARGE_INIT", + "DISCHARGE_INITMEASURING", + "DISCHARGE_INIT_RECOVERY", + "DISCHARGE_RECOVERY", + "DISCHARGE_READOUT_INIT", + "DISCHARGE_READOUT", + "DISCHARGE_WAKEUP", +}; + +enum ab8500_fg_charge_state { + AB8500_FG_CHARGE_INIT, + AB8500_FG_CHARGE_READOUT, +}; + +static char *charge_state[] = { + "CHARGE_INIT", + "CHARGE_READOUT", +}; + +enum ab8500_fg_calibration_state { + AB8500_FG_CALIB_INIT, + AB8500_FG_CALIB_WAIT, + AB8500_FG_CALIB_END, +}; + +struct ab8500_fg_avg_cap { + int avg; + int samples[NBR_AVG_SAMPLES]; + __kernel_time_t time_stamps[NBR_AVG_SAMPLES]; + int pos; + int nbr_samples; + int sum; +}; + +struct ab8500_fg_battery_capacity { + int max_mah_design; + int max_mah; + int mah; + int permille; + int level; + int prev_mah; + int prev_percent; + int prev_level; + int user_mah; +}; + +struct ab8500_fg_flags { + bool fg_enabled; + bool conv_done; + bool charging; + bool fully_charged; + bool force_full; + bool low_bat_delay; + bool low_bat; + bool bat_ovv; + bool batt_unknown; + bool calibrate; + bool user_cap; + bool batt_id_received; +}; + +struct inst_curr_result_list { + struct list_head list; + int *result; +}; + +/** + * struct ab8500_fg - ab8500 FG device information + * @dev: Pointer to the structure device + * @node: a list of AB8500 FGs, hence prepared for reentrance + * @irq holds the CCEOC interrupt number + * @vbat: Battery voltage in mV + * @vbat_nom: Nominal battery voltage in mV + * @inst_curr: Instantenous battery current in mA + * @avg_curr: Average battery current in mA + * @bat_temp battery temperature + * @fg_samples: Number of samples used in the FG accumulation + * @accu_charge: Accumulated charge from the last conversion + * @recovery_cnt: Counter for recovery mode + * @high_curr_cnt: Counter for high current mode + * @init_cnt: Counter for init mode + * @recovery_needed: Indicate if recovery is needed + * @high_curr_mode: Indicate if we're in high current mode + * @init_capacity: Indicate if initial capacity measuring should be done + * @turn_off_fg: True if fg was off before current measurement + * @calib_state State during offset calibration + * @discharge_state: Current discharge state + * @charge_state: Current charge state + * @ab8500_fg_complete Completion struct used for the instant current reading + * @flags: Structure for information about events triggered + * @bat_cap: Structure for battery capacity specific parameters + * @avg_cap: Average capacity filter + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @pdata: Pointer to the abx500_fg platform data + * @bat: Pointer to the abx500_bm platform data + * @fg_psy: Structure that holds the FG specific battery properties + * @fg_wq: Work queue for running the FG algorithm + * @fg_periodic_work: Work to run the FG algorithm periodically + * @fg_low_bat_work: Work to check low bat condition + * @fg_reinit_work Work used to reset and reinitialise the FG algorithm + * @fg_work: Work to run the FG algorithm instantly + * @fg_acc_cur_work: Work to read the FG accumulator + * @fg_check_hw_failure_work: Work for checking HW state + * @cc_lock: Mutex for locking the CC + * @fg_kobject: Structure of type kobject + */ +struct ab8500_fg { + struct device *dev; + struct list_head node; + int irq; + int vbat; + int vbat_nom; + int inst_curr; + int avg_curr; + int bat_temp; + int fg_samples; + int accu_charge; + int recovery_cnt; + int high_curr_cnt; + int init_cnt; + bool recovery_needed; + bool high_curr_mode; + bool init_capacity; + bool turn_off_fg; + enum ab8500_fg_calibration_state calib_state; + enum ab8500_fg_discharge_state discharge_state; + enum ab8500_fg_charge_state charge_state; + struct completion ab8500_fg_complete; + struct ab8500_fg_flags flags; + struct ab8500_fg_battery_capacity bat_cap; + struct ab8500_fg_avg_cap avg_cap; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct abx500_fg_platform_data *pdata; + struct abx500_bm_data *bat; + struct power_supply fg_psy; + struct workqueue_struct *fg_wq; + struct delayed_work fg_periodic_work; + struct delayed_work fg_low_bat_work; + struct delayed_work fg_reinit_work; + struct work_struct fg_work; + struct work_struct fg_acc_cur_work; + struct delayed_work fg_check_hw_failure_work; + struct mutex cc_lock; + struct kobject fg_kobject; +}; +static LIST_HEAD(ab8500_fg_list); + +/** + * ab8500_fg_get() - returns a reference to the primary AB8500 fuel gauge + * (i.e. the first fuel gauge in the instance list) + */ +struct ab8500_fg *ab8500_fg_get(void) +{ + struct ab8500_fg *fg; + + if (list_empty(&ab8500_fg_list)) + return NULL; + + fg = list_first_entry(&ab8500_fg_list, struct ab8500_fg, node); + return fg; +} + +/* Main battery properties */ +static enum power_supply_property ab8500_fg_props[] = { + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, + POWER_SUPPLY_PROP_ENERGY_FULL, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, +}; + +/* + * This array maps the raw hex value to lowbat voltage used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_fg_lowbat_voltage_map[] = { + 2300 , + 2325 , + 2350 , + 2375 , + 2400 , + 2425 , + 2450 , + 2475 , + 2500 , + 2525 , + 2550 , + 2575 , + 2600 , + 2625 , + 2650 , + 2675 , + 2700 , + 2725 , + 2750 , + 2775 , + 2800 , + 2825 , + 2850 , + 2875 , + 2900 , + 2925 , + 2950 , + 2975 , + 3000 , + 3025 , + 3050 , + 3075 , + 3100 , + 3125 , + 3150 , + 3175 , + 3200 , + 3225 , + 3250 , + 3275 , + 3300 , + 3325 , + 3350 , + 3375 , + 3400 , + 3425 , + 3450 , + 3475 , + 3500 , + 3525 , + 3550 , + 3575 , + 3600 , + 3625 , + 3650 , + 3675 , + 3700 , + 3725 , + 3750 , + 3775 , + 3800 , + 3825 , + 3850 , + 3850 , +}; + +static u8 ab8500_volt_to_regval(int voltage) +{ + int i; + + if (voltage < ab8500_fg_lowbat_voltage_map[0]) + return 0; + + for (i = 0; i < ARRAY_SIZE(ab8500_fg_lowbat_voltage_map); i++) { + if (voltage < ab8500_fg_lowbat_voltage_map[i]) + return (u8) i - 1; + } + + /* If not captured above, return index of last element */ + return (u8) ARRAY_SIZE(ab8500_fg_lowbat_voltage_map) - 1; +} + +/** + * ab8500_fg_is_low_curr() - Low or high current mode + * @di: pointer to the ab8500_fg structure + * @curr: the current to base or our decision on + * + * Low current mode if the current consumption is below a certain threshold + */ +static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr) +{ + /* + * We want to know if we're in low current mode + */ + if (curr > -di->bat->fg_params->high_curr_threshold) + return true; + else + return false; +} + +/** + * ab8500_fg_add_cap_sample() - Add capacity to average filter + * @di: pointer to the ab8500_fg structure + * @sample: the capacity in mAh to add to the filter + * + * A capacity is added to the filter and a new mean capacity is calculated and + * returned + */ +static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample) +{ + struct timespec ts; + struct ab8500_fg_avg_cap *avg = &di->avg_cap; + + getnstimeofday(&ts); + + do { + avg->sum += sample - avg->samples[avg->pos]; + avg->samples[avg->pos] = sample; + avg->time_stamps[avg->pos] = ts.tv_sec; + avg->pos++; + + if (avg->pos == NBR_AVG_SAMPLES) + avg->pos = 0; + + if (avg->nbr_samples < NBR_AVG_SAMPLES) + avg->nbr_samples++; + + /* + * Check the time stamp for each sample. If too old, + * replace with latest sample + */ + } while (ts.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]); + + avg->avg = avg->sum / avg->nbr_samples; + + return avg->avg; +} + +/** + * ab8500_fg_clear_cap_samples() - Clear average filter + * @di: pointer to the ab8500_fg structure + * + * The capacity filter is is reset to zero. + */ +static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di) +{ + int i; + struct ab8500_fg_avg_cap *avg = &di->avg_cap; + + avg->pos = 0; + avg->nbr_samples = 0; + avg->sum = 0; + avg->avg = 0; + + for (i = 0; i < NBR_AVG_SAMPLES; i++) { + avg->samples[i] = 0; + avg->time_stamps[i] = 0; + } +} + +/** + * ab8500_fg_fill_cap_sample() - Fill average filter + * @di: pointer to the ab8500_fg structure + * @sample: the capacity in mAh to fill the filter with + * + * The capacity filter is filled with a capacity in mAh + */ +static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample) +{ + int i; + struct timespec ts; + struct ab8500_fg_avg_cap *avg = &di->avg_cap; + + getnstimeofday(&ts); + + for (i = 0; i < NBR_AVG_SAMPLES; i++) { + avg->samples[i] = sample; + avg->time_stamps[i] = ts.tv_sec; + } + + avg->pos = 0; + avg->nbr_samples = NBR_AVG_SAMPLES; + avg->sum = sample * NBR_AVG_SAMPLES; + avg->avg = sample; +} + +/** + * ab8500_fg_coulomb_counter() - enable coulomb counter + * @di: pointer to the ab8500_fg structure + * @enable: enable/disable + * + * Enable/Disable coulomb counter. + * On failure returns negative value. + */ +static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable) +{ + int ret = 0; + mutex_lock(&di->cc_lock); + if (enable) { + /* To be able to reprogram the number of samples, we have to + * first stop the CC and then enable it again */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, 0x00); + if (ret) + goto cc_err; + + /* Program the samples */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU, + di->fg_samples); + if (ret) + goto cc_err; + + /* Start the CC */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, + (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA)); + if (ret) + goto cc_err; + + di->flags.fg_enabled = true; + } else { + /* Clear any pending read requests */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0); + if (ret) + goto cc_err; + + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU_CTRL, 0); + if (ret) + goto cc_err; + + /* Stop the CC */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, 0); + if (ret) + goto cc_err; + + di->flags.fg_enabled = false; + + } + dev_dbg(di->dev, " CC enabled: %d Samples: %d\n", + enable, di->fg_samples); + + mutex_unlock(&di->cc_lock); + + return ret; +cc_err: + dev_err(di->dev, "%s Enabling coulomb counter failed\n", __func__); + mutex_unlock(&di->cc_lock); + return ret; +} + +/** + * ab8500_fg_inst_curr_start() - start battery instantaneous current + * @di: pointer to the ab8500_fg structure + * + * Returns 0 or error code + * Note: This is part "one" and has to be called before + * ab8500_fg_inst_curr_finalize() + */ + int ab8500_fg_inst_curr_start(struct ab8500_fg *di) +{ + u8 reg_val; + int ret; + + mutex_lock(&di->cc_lock); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, ®_val); + if (ret < 0) + goto fail; + + if (!(reg_val & CC_PWR_UP_ENA)) { + dev_dbg(di->dev, "%s Enable FG\n", __func__); + di->turn_off_fg = true; + + /* Program the samples */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU, + SEC_TO_SAMPLE(10)); + if (ret) + goto fail; + + /* Start the CC */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, + (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA)); + if (ret) + goto fail; + } else { + di->turn_off_fg = false; + } + + /* Return and WFI */ + INIT_COMPLETION(di->ab8500_fg_complete); + enable_irq(di->irq); + + /* Note: cc_lock is still locked */ + return 0; +fail: + mutex_unlock(&di->cc_lock); + return ret; +} + +/** + * ab8500_fg_inst_curr_done() - check if fg conversion is done + * @di: pointer to the ab8500_fg structure + * + * Returns 1 if conversion done, 0 if still waiting + */ +int ab8500_fg_inst_curr_done(struct ab8500_fg *di) +{ + return completion_done(&di->ab8500_fg_complete); +} + +/** + * ab8500_fg_inst_curr_finalize() - battery instantaneous current + * @di: pointer to the ab8500_fg structure + * @res: battery instantenous current(on success) + * + * Returns 0 or an error code + * Note: This is part "two" and has to be called at earliest 250 ms + * after ab8500_fg_inst_curr_start() + */ +int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) +{ + u8 low, high; + int val; + int ret; + int timeout; + + if (!completion_done(&di->ab8500_fg_complete)) { + timeout = wait_for_completion_timeout(&di->ab8500_fg_complete, + INS_CURR_TIMEOUT); + dev_dbg(di->dev, "Finalize time: %d ms\n", + ((INS_CURR_TIMEOUT - timeout) * 1000) / HZ); + if (!timeout) { + ret = -ETIME; + disable_irq(di->irq); + dev_err(di->dev, "completion timed out [%d]\n", + __LINE__); + goto fail; + } + } + + disable_irq(di->irq); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + READ_REQ, READ_REQ); + + /* 100uS between read request and read is needed */ + usleep_range(100, 100); + + /* Read CC Sample conversion value Low and high */ + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_SMPL_CNVL_REG, &low); + if (ret < 0) + goto fail; + + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_SMPL_CNVH_REG, &high); + if (ret < 0) + goto fail; + + /* + * negative value for Discharging + * convert 2's compliment into decimal + */ + if (high & 0x10) + val = (low | (high << 8) | 0xFFFFE000); + else + val = (low | (high << 8)); + + /* + * Convert to unit value in mA + * Full scale input voltage is + * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA + * Given a 250ms conversion cycle time the LSB corresponds + * to 112.9 nAh. Convert to current by dividing by the conversion + * time in hours (250ms = 1 / (3600 * 4)h) + * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + */ + val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / + (1000 * di->bat->fg_res); + + if (di->turn_off_fg) { + dev_dbg(di->dev, "%s Disable FG\n", __func__); + + /* Clear any pending read requests */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0); + if (ret) + goto fail; + + /* Stop the CC */ + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8500_RTC_CC_CONF_REG, 0); + if (ret) + goto fail; + } + mutex_unlock(&di->cc_lock); + (*res) = val; + + return 0; +fail: + mutex_unlock(&di->cc_lock); + return ret; +} + +/** + * ab8500_fg_inst_curr_blocking() - battery instantaneous current + * @di: pointer to the ab8500_fg structure + * @res: battery instantenous current(on success) + * + * Returns 0 else error code + */ +int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di) +{ + int ret; + int res = 0; + + ret = ab8500_fg_inst_curr_start(di); + if (ret) { + dev_err(di->dev, "Failed to initialize fg_inst\n"); + return 0; + } + + ret = ab8500_fg_inst_curr_finalize(di, &res); + if (ret) { + dev_err(di->dev, "Failed to finalize fg_inst\n"); + return 0; + } + + return res; +} + +/** + * ab8500_fg_acc_cur_work() - average battery current + * @work: pointer to the work_struct structure + * + * Updated the average battery current obtained from the + * coulomb counter. + */ +static void ab8500_fg_acc_cur_work(struct work_struct *work) +{ + int val; + int ret; + u8 low, med, high; + + struct ab8500_fg *di = container_of(work, + struct ab8500_fg, fg_acc_cur_work); + + mutex_lock(&di->cc_lock); + ret = abx500_set_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_NCOV_ACCU_CTRL, RD_NCONV_ACCU_REQ); + if (ret) + goto exit; + + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_NCOV_ACCU_LOW, &low); + if (ret < 0) + goto exit; + + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_NCOV_ACCU_MED, &med); + if (ret < 0) + goto exit; + + ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE, + AB8500_GASG_CC_NCOV_ACCU_HIGH, &high); + if (ret < 0) + goto exit; + + /* Check for sign bit in case of negative value, 2's compliment */ + if (high & 0x10) + val = (low | (med << 8) | (high << 16) | 0xFFE00000); + else + val = (low | (med << 8) | (high << 16)); + + /* + * Convert to uAh + * Given a 250ms conversion cycle time the LSB corresponds + * to 112.9 nAh. + * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + */ + di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) / + (100 * di->bat->fg_res); + + /* + * Convert to unit value in mA + * Full scale input voltage is + * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA + * Given a 250ms conversion cycle time the LSB corresponds + * to 112.9 nAh. Convert to current by dividing by the conversion + * time in hours (= samples / (3600 * 4)h) + * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + */ + di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) / + (1000 * di->bat->fg_res * (di->fg_samples / 4)); + + di->flags.conv_done = true; + + mutex_unlock(&di->cc_lock); + + queue_work(di->fg_wq, &di->fg_work); + + return; +exit: + dev_err(di->dev, + "Failed to read or write gas gauge registers\n"); + mutex_unlock(&di->cc_lock); + queue_work(di->fg_wq, &di->fg_work); +} + +/** + * ab8500_fg_bat_voltage() - get battery voltage + * @di: pointer to the ab8500_fg structure + * + * Returns battery voltage(on success) else error code + */ +static int ab8500_fg_bat_voltage(struct ab8500_fg *di) +{ + int vbat; + static int prev; + + vbat = ab8500_gpadc_convert(di->gpadc, MAIN_BAT_V); + if (vbat < 0) { + dev_err(di->dev, + "%s gpadc conversion failed, using previous value\n", + __func__); + return prev; + } + + prev = vbat; + return vbat; +} + +/** + * ab8500_fg_volt_to_capacity() - Voltage based capacity + * @di: pointer to the ab8500_fg structure + * @voltage: The voltage to convert to a capacity + * + * Returns battery capacity in per mille based on voltage + */ +static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage) +{ + int i, tbl_size; + struct abx500_v_to_cap *tbl; + int cap = 0; + + tbl = di->bat->bat_type[di->bat->batt_id].v_to_cap_tbl, + tbl_size = di->bat->bat_type[di->bat->batt_id].n_v_cap_tbl_elements; + + for (i = 0; i < tbl_size; ++i) { + if (voltage > tbl[i].voltage) + break; + } + + if ((i > 0) && (i < tbl_size)) { + cap = interpolate(voltage, + tbl[i].voltage, + tbl[i].capacity * 10, + tbl[i-1].voltage, + tbl[i-1].capacity * 10); + } else if (i == 0) { + cap = 1000; + } else { + cap = 0; + } + + dev_dbg(di->dev, "%s Vbat: %d, Cap: %d per mille", + __func__, voltage, cap); + + return cap; +} + +/** + * ab8500_fg_uncomp_volt_to_capacity() - Uncompensated voltage based capacity + * @di: pointer to the ab8500_fg structure + * + * Returns battery capacity based on battery voltage that is not compensated + * for the voltage drop due to the load + */ +static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di) +{ + di->vbat = ab8500_fg_bat_voltage(di); + return ab8500_fg_volt_to_capacity(di, di->vbat); +} + +/** + * ab8500_fg_battery_resistance() - Returns the battery inner resistance + * @di: pointer to the ab8500_fg structure + * + * Returns battery inner resistance added with the fuel gauge resistor value + * to get the total resistance in the whole link from gnd to bat+ node. + */ +static int ab8500_fg_battery_resistance(struct ab8500_fg *di) +{ + int i, tbl_size; + struct batres_vs_temp *tbl; + int resist = 0; + + tbl = di->bat->bat_type[di->bat->batt_id].batres_tbl; + tbl_size = di->bat->bat_type[di->bat->batt_id].n_batres_tbl_elements; + + for (i = 0; i < tbl_size; ++i) { + if (di->bat_temp / 10 > tbl[i].temp) + break; + } + + if ((i > 0) && (i < tbl_size)) { + resist = interpolate(di->bat_temp / 10, + tbl[i].temp, + tbl[i].resist, + tbl[i-1].temp, + tbl[i-1].resist); + } else if (i == 0) { + resist = tbl[0].resist; + } else { + resist = tbl[tbl_size - 1].resist; + } + + dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d" + " fg resistance %d, total: %d (mOhm)\n", + __func__, di->bat_temp, resist, di->bat->fg_res / 10, + (di->bat->fg_res / 10) + resist); + + /* fg_res variable is in 0.1mOhm */ + resist += di->bat->fg_res / 10; + + return resist; +} + +/** + * ab8500_fg_load_comp_volt_to_capacity() - Load compensated voltage based capacity + * @di: pointer to the ab8500_fg structure + * + * Returns battery capacity based on battery voltage that is load compensated + * for the voltage drop + */ +static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di) +{ + int vbat_comp, res; + int i = 0; + int vbat = 0; + + ab8500_fg_inst_curr_start(di); + + do { + vbat += ab8500_fg_bat_voltage(di); + i++; + msleep(5); + } while (!ab8500_fg_inst_curr_done(di)); + + ab8500_fg_inst_curr_finalize(di, &di->inst_curr); + + di->vbat = vbat / i; + res = ab8500_fg_battery_resistance(di); + + /* Use Ohms law to get the load compensated voltage */ + vbat_comp = di->vbat - (di->inst_curr * res) / 1000; + + dev_dbg(di->dev, "%s Measured Vbat: %dmV,Compensated Vbat %dmV, " + "R: %dmOhm, Current: %dmA Vbat Samples: %d\n", + __func__, di->vbat, vbat_comp, res, di->inst_curr, i); + + return ab8500_fg_volt_to_capacity(di, vbat_comp); +} + +/** + * ab8500_fg_convert_mah_to_permille() - Capacity in mAh to permille + * @di: pointer to the ab8500_fg structure + * @cap_mah: capacity in mAh + * + * Converts capacity in mAh to capacity in permille + */ +static int ab8500_fg_convert_mah_to_permille(struct ab8500_fg *di, int cap_mah) +{ + return (cap_mah * 1000) / di->bat_cap.max_mah_design; +} + +/** + * ab8500_fg_convert_permille_to_mah() - Capacity in permille to mAh + * @di: pointer to the ab8500_fg structure + * @cap_pm: capacity in permille + * + * Converts capacity in permille to capacity in mAh + */ +static int ab8500_fg_convert_permille_to_mah(struct ab8500_fg *di, int cap_pm) +{ + return cap_pm * di->bat_cap.max_mah_design / 1000; +} + +/** + * ab8500_fg_convert_mah_to_uwh() - Capacity in mAh to uWh + * @di: pointer to the ab8500_fg structure + * @cap_mah: capacity in mAh + * + * Converts capacity in mAh to capacity in uWh + */ +static int ab8500_fg_convert_mah_to_uwh(struct ab8500_fg *di, int cap_mah) +{ + u64 div_res; + u32 div_rem; + + div_res = ((u64) cap_mah) * ((u64) di->vbat_nom); + div_rem = do_div(div_res, 1000); + + /* Make sure to round upwards if necessary */ + if (div_rem >= 1000 / 2) + div_res++; + + return (int) div_res; +} + +/** + * ab8500_fg_calc_cap_charging() - Calculate remaining capacity while charging + * @di: pointer to the ab8500_fg structure + * + * Return the capacity in mAh based on previous calculated capcity and the FG + * accumulator register value. The filter is filled with this capacity + */ +static int ab8500_fg_calc_cap_charging(struct ab8500_fg *di) +{ + dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n", + __func__, + di->bat_cap.mah, + di->accu_charge); + + /* Capacity should not be less than 0 */ + if (di->bat_cap.mah + di->accu_charge > 0) + di->bat_cap.mah += di->accu_charge; + else + di->bat_cap.mah = 0; + /* + * We force capacity to 100% once when the algorithm + * reports that it's full. + */ + if (di->bat_cap.mah >= di->bat_cap.max_mah_design || + di->flags.force_full) { + di->bat_cap.mah = di->bat_cap.max_mah_design; + } + + ab8500_fg_fill_cap_sample(di, di->bat_cap.mah); + di->bat_cap.permille = + ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah); + + /* We need to update battery voltage and inst current when charging */ + di->vbat = ab8500_fg_bat_voltage(di); + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + + return di->bat_cap.mah; +} + +/** + * ab8500_fg_calc_cap_discharge_voltage() - Capacity in discharge with voltage + * @di: pointer to the ab8500_fg structure + * @comp: if voltage should be load compensated before capacity calc + * + * Return the capacity in mAh based on the battery voltage. The voltage can + * either be load compensated or not. This value is added to the filter and a + * new mean value is calculated and returned. + */ +static int ab8500_fg_calc_cap_discharge_voltage(struct ab8500_fg *di, bool comp) +{ + int permille, mah; + + if (comp) + permille = ab8500_fg_load_comp_volt_to_capacity(di); + else + permille = ab8500_fg_uncomp_volt_to_capacity(di); + + mah = ab8500_fg_convert_permille_to_mah(di, permille); + + di->bat_cap.mah = ab8500_fg_add_cap_sample(di, mah); + di->bat_cap.permille = + ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah); + + return di->bat_cap.mah; +} + +/** + * ab8500_fg_calc_cap_discharge_fg() - Capacity in discharge with FG + * @di: pointer to the ab8500_fg structure + * + * Return the capacity in mAh based on previous calculated capcity and the FG + * accumulator register value. This value is added to the filter and a + * new mean value is calculated and returned. + */ +static int ab8500_fg_calc_cap_discharge_fg(struct ab8500_fg *di) +{ + int permille_volt, permille; + + dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n", + __func__, + di->bat_cap.mah, + di->accu_charge); + + /* Capacity should not be less than 0 */ + if (di->bat_cap.mah + di->accu_charge > 0) + di->bat_cap.mah += di->accu_charge; + else + di->bat_cap.mah = 0; + + if (di->bat_cap.mah >= di->bat_cap.max_mah_design) + di->bat_cap.mah = di->bat_cap.max_mah_design; + + /* + * Check against voltage based capacity. It can not be lower + * than what the uncompensated voltage says + */ + permille = ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah); + permille_volt = ab8500_fg_uncomp_volt_to_capacity(di); + + if (permille < permille_volt) { + di->bat_cap.permille = permille_volt; + di->bat_cap.mah = ab8500_fg_convert_permille_to_mah(di, + di->bat_cap.permille); + + dev_dbg(di->dev, "%s voltage based: perm %d perm_volt %d\n", + __func__, + permille, + permille_volt); + + ab8500_fg_fill_cap_sample(di, di->bat_cap.mah); + } else { + ab8500_fg_fill_cap_sample(di, di->bat_cap.mah); + di->bat_cap.permille = + ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah); + } + + return di->bat_cap.mah; +} + +/** + * ab8500_fg_capacity_level() - Get the battery capacity level + * @di: pointer to the ab8500_fg structure + * + * Get the battery capacity level based on the capacity in percent + */ +static int ab8500_fg_capacity_level(struct ab8500_fg *di) +{ + int ret, percent; + + percent = di->bat_cap.permille / 10; + + if (percent <= di->bat->cap_levels->critical || + di->flags.low_bat) + ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + else if (percent <= di->bat->cap_levels->low) + ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + else if (percent <= di->bat->cap_levels->normal) + ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + else if (percent <= di->bat->cap_levels->high) + ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH; + else + ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + + return ret; +} + +/** + * ab8500_fg_check_capacity_limits() - Check if capacity has changed + * @di: pointer to the ab8500_fg structure + * @init: capacity is allowed to go up in init mode + * + * Check if capacity or capacity limit has changed and notify the system + * about it using the power_supply framework + */ +static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) +{ + bool changed = false; + + di->bat_cap.level = ab8500_fg_capacity_level(di); + + if (di->bat_cap.level != di->bat_cap.prev_level) { + /* + * We do not allow reported capacity level to go up + * unless we're charging or if we're in init + */ + if (!(!di->flags.charging && di->bat_cap.level > + di->bat_cap.prev_level) || init) { + dev_dbg(di->dev, "level changed from %d to %d\n", + di->bat_cap.prev_level, + di->bat_cap.level); + di->bat_cap.prev_level = di->bat_cap.level; + changed = true; + } else { + dev_dbg(di->dev, "level not allowed to go up " + "since no charger is connected: %d to %d\n", + di->bat_cap.prev_level, + di->bat_cap.level); + } + } + + /* + * If we have received the LOW_BAT IRQ, set capacity to 0 to initiate + * shutdown + */ + if (di->flags.low_bat) { + dev_dbg(di->dev, "Battery low, set capacity to 0\n"); + di->bat_cap.prev_percent = 0; + di->bat_cap.permille = 0; + di->bat_cap.prev_mah = 0; + di->bat_cap.mah = 0; + changed = true; + } else if (di->flags.fully_charged) { + /* + * We report 100% if algorithm reported fully charged + * unless capacity drops too much + */ + if (di->flags.force_full) { + di->bat_cap.prev_percent = di->bat_cap.permille / 10; + di->bat_cap.prev_mah = di->bat_cap.mah; + } else if (!di->flags.force_full && + di->bat_cap.prev_percent != + (di->bat_cap.permille) / 10 && + (di->bat_cap.permille / 10) < + di->bat->fg_params->maint_thres) { + dev_dbg(di->dev, + "battery reported full " + "but capacity dropping: %d\n", + di->bat_cap.permille / 10); + di->bat_cap.prev_percent = di->bat_cap.permille / 10; + di->bat_cap.prev_mah = di->bat_cap.mah; + + changed = true; + } + } else if (di->bat_cap.prev_percent != di->bat_cap.permille / 10) { + if (di->bat_cap.permille / 10 == 0) { + /* + * We will not report 0% unless we've got + * the LOW_BAT IRQ, no matter what the FG + * algorithm says. + */ + di->bat_cap.prev_percent = 1; + di->bat_cap.permille = 1; + di->bat_cap.prev_mah = 1; + di->bat_cap.mah = 1; + + changed = true; + } else if (!(!di->flags.charging && + (di->bat_cap.permille / 10) > + di->bat_cap.prev_percent) || init) { + /* + * We do not allow reported capacity to go up + * unless we're charging or if we're in init + */ + dev_dbg(di->dev, + "capacity changed from %d to %d (%d)\n", + di->bat_cap.prev_percent, + di->bat_cap.permille / 10, + di->bat_cap.permille); + di->bat_cap.prev_percent = di->bat_cap.permille / 10; + di->bat_cap.prev_mah = di->bat_cap.mah; + + changed = true; + } else { + dev_dbg(di->dev, "capacity not allowed to go up since " + "no charger is connected: %d to %d (%d)\n", + di->bat_cap.prev_percent, + di->bat_cap.permille / 10, + di->bat_cap.permille); + } + } + + if (changed) { + power_supply_changed(&di->fg_psy); + if (di->flags.fully_charged && di->flags.force_full) { + dev_dbg(di->dev, "Battery full, notifying.\n"); + di->flags.force_full = false; + sysfs_notify(&di->fg_kobject, NULL, "charge_full"); + } + sysfs_notify(&di->fg_kobject, NULL, "charge_now"); + } +} + +static void ab8500_fg_charge_state_to(struct ab8500_fg *di, + enum ab8500_fg_charge_state new_state) +{ + dev_dbg(di->dev, "Charge state from %d [%s] to %d [%s]\n", + di->charge_state, + charge_state[di->charge_state], + new_state, + charge_state[new_state]); + + di->charge_state = new_state; +} + +static void ab8500_fg_discharge_state_to(struct ab8500_fg *di, + enum ab8500_fg_discharge_state new_state) +{ + dev_dbg(di->dev, "Disharge state from %d [%s] to %d [%s]\n", + di->discharge_state, + discharge_state[di->discharge_state], + new_state, + discharge_state[new_state]); + + di->discharge_state = new_state; +} + +/** + * ab8500_fg_algorithm_charging() - FG algorithm for when charging + * @di: pointer to the ab8500_fg structure + * + * Battery capacity calculation state machine for when we're charging + */ +static void ab8500_fg_algorithm_charging(struct ab8500_fg *di) +{ + /* + * If we change to discharge mode + * we should start with recovery + */ + if (di->discharge_state != AB8500_FG_DISCHARGE_INIT_RECOVERY) + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_INIT_RECOVERY); + + switch (di->charge_state) { + case AB8500_FG_CHARGE_INIT: + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_charging); + + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT); + + break; + + case AB8500_FG_CHARGE_READOUT: + /* + * Read the FG and calculate the new capacity + */ + mutex_lock(&di->cc_lock); + if (!di->flags.conv_done) { + /* Wasn't the CC IRQ that got us here */ + mutex_unlock(&di->cc_lock); + dev_dbg(di->dev, "%s CC conv not done\n", + __func__); + + break; + } + di->flags.conv_done = false; + mutex_unlock(&di->cc_lock); + + ab8500_fg_calc_cap_charging(di); + + break; + + default: + break; + } + + /* Check capacity limits */ + ab8500_fg_check_capacity_limits(di, false); +} + +static void force_capacity(struct ab8500_fg *di) +{ + int cap; + + ab8500_fg_clear_cap_samples(di); + cap = di->bat_cap.user_mah; + if (cap > di->bat_cap.max_mah_design) { + dev_dbg(di->dev, "Remaining cap %d can't be bigger than total" + " %d\n", cap, di->bat_cap.max_mah_design); + cap = di->bat_cap.max_mah_design; + } + ab8500_fg_fill_cap_sample(di, di->bat_cap.user_mah); + di->bat_cap.permille = ab8500_fg_convert_mah_to_permille(di, cap); + di->bat_cap.mah = cap; + ab8500_fg_check_capacity_limits(di, true); +} + +static bool check_sysfs_capacity(struct ab8500_fg *di) +{ + int cap, lower, upper; + int cap_permille; + + cap = di->bat_cap.user_mah; + + cap_permille = ab8500_fg_convert_mah_to_permille(di, + di->bat_cap.user_mah); + + lower = di->bat_cap.permille - di->bat->fg_params->user_cap_limit * 10; + upper = di->bat_cap.permille + di->bat->fg_params->user_cap_limit * 10; + + if (lower < 0) + lower = 0; + /* 1000 is permille, -> 100 percent */ + if (upper > 1000) + upper = 1000; + + dev_dbg(di->dev, "Capacity limits:" + " (Lower: %d User: %d Upper: %d) [user: %d, was: %d]\n", + lower, cap_permille, upper, cap, di->bat_cap.mah); + + /* If within limits, use the saved capacity and exit estimation...*/ + if (cap_permille > lower && cap_permille < upper) { + dev_dbg(di->dev, "OK! Using users cap %d uAh now\n", cap); + force_capacity(di); + return true; + } + dev_dbg(di->dev, "Capacity from user out of limits, ignoring"); + return false; +} + +/** + * ab8500_fg_algorithm_discharging() - FG algorithm for when discharging + * @di: pointer to the ab8500_fg structure + * + * Battery capacity calculation state machine for when we're discharging + */ +static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) +{ + int sleep_time; + + /* If we change to charge mode we should start with init */ + if (di->charge_state != AB8500_FG_CHARGE_INIT) + ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT); + + switch (di->discharge_state) { + case AB8500_FG_DISCHARGE_INIT: + /* We use the FG IRQ to work on */ + di->init_cnt = 0; + di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_INITMEASURING); + + /* Intentional fallthrough */ + case AB8500_FG_DISCHARGE_INITMEASURING: + /* + * Discard a number of samples during startup. + * After that, use compensated voltage for a few + * samples to get an initial capacity. + * Then go to READOUT + */ + sleep_time = di->bat->fg_params->init_timer; + + /* Discard the first [x] seconds */ + if (di->init_cnt > + di->bat->fg_params->init_discard_time) { + ab8500_fg_calc_cap_discharge_voltage(di, true); + + ab8500_fg_check_capacity_limits(di, true); + } + + di->init_cnt += sleep_time; + if (di->init_cnt > di->bat->fg_params->init_total_time) + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT_INIT); + + break; + + case AB8500_FG_DISCHARGE_INIT_RECOVERY: + di->recovery_cnt = 0; + di->recovery_needed = true; + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_RECOVERY); + + /* Intentional fallthrough */ + + case AB8500_FG_DISCHARGE_RECOVERY: + sleep_time = di->bat->fg_params->recovery_sleep_timer; + + /* + * We should check the power consumption + * If low, go to READOUT (after x min) or + * RECOVERY_SLEEP if time left. + * If high, go to READOUT + */ + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + + if (ab8500_fg_is_low_curr(di, di->inst_curr)) { + if (di->recovery_cnt > + di->bat->fg_params->recovery_total_time) { + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_high_curr); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT); + di->recovery_needed = false; + } else { + queue_delayed_work(di->fg_wq, + &di->fg_periodic_work, + sleep_time * HZ); + } + di->recovery_cnt += sleep_time; + } else { + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_high_curr); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT); + } + break; + + case AB8500_FG_DISCHARGE_READOUT_INIT: + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_high_curr); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT); + break; + + case AB8500_FG_DISCHARGE_READOUT: + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + + if (ab8500_fg_is_low_curr(di, di->inst_curr)) { + /* Detect mode change */ + if (di->high_curr_mode) { + di->high_curr_mode = false; + di->high_curr_cnt = 0; + } + + if (di->recovery_needed) { + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_RECOVERY); + + queue_delayed_work(di->fg_wq, + &di->fg_periodic_work, 0); + + break; + } + + ab8500_fg_calc_cap_discharge_voltage(di, true); + } else { + mutex_lock(&di->cc_lock); + if (!di->flags.conv_done) { + /* Wasn't the CC IRQ that got us here */ + mutex_unlock(&di->cc_lock); + dev_dbg(di->dev, "%s CC conv not done\n", + __func__); + + break; + } + di->flags.conv_done = false; + mutex_unlock(&di->cc_lock); + + /* Detect mode change */ + if (!di->high_curr_mode) { + di->high_curr_mode = true; + di->high_curr_cnt = 0; + } + + di->high_curr_cnt += + di->bat->fg_params->accu_high_curr; + if (di->high_curr_cnt > + di->bat->fg_params->high_curr_time) + di->recovery_needed = true; + + ab8500_fg_calc_cap_discharge_fg(di); + } + + ab8500_fg_check_capacity_limits(di, false); + + break; + + case AB8500_FG_DISCHARGE_WAKEUP: + ab8500_fg_coulomb_counter(di, true); + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + + ab8500_fg_calc_cap_discharge_voltage(di, true); + + di->fg_samples = SEC_TO_SAMPLE( + di->bat->fg_params->accu_high_curr); + ab8500_fg_coulomb_counter(di, true); + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT); + + ab8500_fg_check_capacity_limits(di, false); + + break; + + default: + break; + } +} + +/** + * ab8500_fg_algorithm_calibrate() - Internal columb counter offset calibration + * @di: pointer to the ab8500_fg structure + * + */ +static void ab8500_fg_algorithm_calibrate(struct ab8500_fg *di) +{ + int ret; + + switch (di->calib_state) { + case AB8500_FG_CALIB_INIT: + dev_dbg(di->dev, "Calibration ongoing...\n"); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + CC_INT_CAL_N_AVG_MASK, CC_INT_CAL_SAMPLES_8); + if (ret < 0) + goto err; + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + CC_INTAVGOFFSET_ENA, CC_INTAVGOFFSET_ENA); + if (ret < 0) + goto err; + di->calib_state = AB8500_FG_CALIB_WAIT; + break; + case AB8500_FG_CALIB_END: + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + CC_MUXOFFSET, CC_MUXOFFSET); + if (ret < 0) + goto err; + di->flags.calibrate = false; + dev_dbg(di->dev, "Calibration done...\n"); + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + break; + case AB8500_FG_CALIB_WAIT: + dev_dbg(di->dev, "Calibration WFI\n"); + default: + break; + } + return; +err: + /* Something went wrong, don't calibrate then */ + dev_err(di->dev, "failed to calibrate the CC\n"); + di->flags.calibrate = false; + di->calib_state = AB8500_FG_CALIB_INIT; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); +} + +/** + * ab8500_fg_algorithm() - Entry point for the FG algorithm + * @di: pointer to the ab8500_fg structure + * + * Entry point for the battery capacity calculation state machine + */ +static void ab8500_fg_algorithm(struct ab8500_fg *di) +{ + if (di->flags.calibrate) + ab8500_fg_algorithm_calibrate(di); + else { + if (di->flags.charging) + ab8500_fg_algorithm_charging(di); + else + ab8500_fg_algorithm_discharging(di); + } + + dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d " + "%d %d %d %d %d %d %d\n", + di->bat_cap.max_mah_design, + di->bat_cap.mah, + di->bat_cap.permille, + di->bat_cap.level, + di->bat_cap.prev_mah, + di->bat_cap.prev_percent, + di->bat_cap.prev_level, + di->vbat, + di->inst_curr, + di->avg_curr, + di->accu_charge, + di->flags.charging, + di->charge_state, + di->discharge_state, + di->high_curr_mode, + di->recovery_needed); +} + +/** + * ab8500_fg_periodic_work() - Run the FG state machine periodically + * @work: pointer to the work_struct structure + * + * Work queue function for periodic work + */ +static void ab8500_fg_periodic_work(struct work_struct *work) +{ + struct ab8500_fg *di = container_of(work, struct ab8500_fg, + fg_periodic_work.work); + + if (di->init_capacity) { + /* A dummy read that will return 0 */ + di->inst_curr = ab8500_fg_inst_curr_blocking(di); + /* Get an initial capacity calculation */ + ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_check_capacity_limits(di, true); + di->init_capacity = false; + + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + } else if (di->flags.user_cap) { + if (check_sysfs_capacity(di)) { + ab8500_fg_check_capacity_limits(di, true); + if (di->flags.charging) + ab8500_fg_charge_state_to(di, + AB8500_FG_CHARGE_INIT); + else + ab8500_fg_discharge_state_to(di, + AB8500_FG_DISCHARGE_READOUT_INIT); + } + di->flags.user_cap = false; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + } else + ab8500_fg_algorithm(di); + +} + +/** + * ab8500_fg_check_hw_failure_work() - Check OVV_BAT condition + * @work: pointer to the work_struct structure + * + * Work queue function for checking the OVV_BAT condition + */ +static void ab8500_fg_check_hw_failure_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_fg *di = container_of(work, struct ab8500_fg, + fg_check_hw_failure_work.work); + + /* + * If we have had a battery over-voltage situation, + * check ovv-bit to see if it should be reset. + */ + if (di->flags.bat_ovv) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STAT_REG, + ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if ((reg_value & BATT_OVV) != BATT_OVV) { + dev_dbg(di->dev, "Battery recovered from OVV\n"); + di->flags.bat_ovv = false; + power_supply_changed(&di->fg_psy); + return; + } + + /* Not yet recovered from ovv, reschedule this test */ + queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, + round_jiffies(HZ)); + } +} + +/** + * ab8500_fg_low_bat_work() - Check LOW_BAT condition + * @work: pointer to the work_struct structure + * + * Work queue function for checking the LOW_BAT condition + */ +static void ab8500_fg_low_bat_work(struct work_struct *work) +{ + int vbat; + + struct ab8500_fg *di = container_of(work, struct ab8500_fg, + fg_low_bat_work.work); + + vbat = ab8500_fg_bat_voltage(di); + + /* Check if LOW_BAT still fulfilled */ + if (vbat < di->bat->fg_params->lowbat_threshold) { + di->flags.low_bat = true; + dev_warn(di->dev, "Battery voltage still LOW\n"); + + /* + * We need to re-schedule this check to be able to detect + * if the voltage increases again during charging + */ + queue_delayed_work(di->fg_wq, &di->fg_low_bat_work, + round_jiffies(LOW_BAT_CHECK_INTERVAL)); + } else { + di->flags.low_bat = false; + dev_warn(di->dev, "Battery voltage OK again\n"); + } + + /* This is needed to dispatch LOW_BAT */ + ab8500_fg_check_capacity_limits(di, false); + + /* Set this flag to check if LOW_BAT IRQ still occurs */ + di->flags.low_bat_delay = false; +} + +/** + * ab8500_fg_battok_calc - calculate the bit pattern corresponding + * to the target voltage. + * @di: pointer to the ab8500_fg structure + * @target target voltage + * + * Returns bit pattern closest to the target voltage + * valid return values are 0-14. (0-BATT_OK_MAX_NR_INCREMENTS) + */ + +static int ab8500_fg_battok_calc(struct ab8500_fg *di, int target) +{ + if (target > BATT_OK_MIN + + (BATT_OK_INCREMENT * BATT_OK_MAX_NR_INCREMENTS)) + return BATT_OK_MAX_NR_INCREMENTS; + if (target < BATT_OK_MIN) + return 0; + return (target - BATT_OK_MIN) / BATT_OK_INCREMENT; +} + +/** + * ab8500_fg_battok_init_hw_register - init battok levels + * @di: pointer to the ab8500_fg structure + * + */ + +static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di) +{ + int selected; + int sel0; + int sel1; + int cbp_sel0; + int cbp_sel1; + int ret; + int new_val; + + sel0 = di->bat->fg_params->battok_falling_th_sel0; + sel1 = di->bat->fg_params->battok_raising_th_sel1; + + cbp_sel0 = ab8500_fg_battok_calc(di, sel0); + cbp_sel1 = ab8500_fg_battok_calc(di, sel1); + + selected = BATT_OK_MIN + cbp_sel0 * BATT_OK_INCREMENT; + + if (selected != sel0) + dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n", + sel0, selected, cbp_sel0); + + selected = BATT_OK_MIN + cbp_sel1 * BATT_OK_INCREMENT; + + if (selected != sel1) + dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n", + sel1, selected, cbp_sel1); + + new_val = cbp_sel0 | (cbp_sel1 << 4); + + dev_dbg(di->dev, "using: %x %d %d\n", new_val, cbp_sel0, cbp_sel1); + ret = abx500_set_register_interruptible(di->dev, AB8500_SYS_CTRL2_BLOCK, + AB8500_BATT_OK_REG, new_val); + return ret; +} + +/** + * ab8500_fg_instant_work() - Run the FG state machine instantly + * @work: pointer to the work_struct structure + * + * Work queue function for instant work + */ +static void ab8500_fg_instant_work(struct work_struct *work) +{ + struct ab8500_fg *di = container_of(work, struct ab8500_fg, fg_work); + + ab8500_fg_algorithm(di); +} + +/** + * ab8500_fg_cc_data_end_handler() - isr to get battery avg current. + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + complete(&di->ab8500_fg_complete); + return IRQ_HANDLED; +} + +/** + * ab8500_fg_cc_convend_handler() - isr to get battery avg current. + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_cc_int_calib_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + di->calib_state = AB8500_FG_CALIB_END; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + return IRQ_HANDLED; +} + +/** + * ab8500_fg_cc_convend_handler() - isr to get battery avg current. + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_cc_convend_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + + queue_work(di->fg_wq, &di->fg_acc_cur_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_fg_batt_ovv_handler() - Battery OVV occured + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_batt_ovv_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + + dev_dbg(di->dev, "Battery OVV\n"); + di->flags.bat_ovv = true; + power_supply_changed(&di->fg_psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_fg_lowbatf_handler() - Battery voltage is below LOW threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_fg structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_fg_lowbatf_handler(int irq, void *_di) +{ + struct ab8500_fg *di = _di; + + if (!di->flags.low_bat_delay) { + dev_warn(di->dev, "Battery voltage is below LOW threshold\n"); + di->flags.low_bat_delay = true; + /* + * Start a timer to check LOW_BAT again after some time + * This is done to avoid shutdown on single voltage dips + */ + queue_delayed_work(di->fg_wq, &di->fg_low_bat_work, + round_jiffies(LOW_BAT_CHECK_INTERVAL)); + } + return IRQ_HANDLED; +} + +/** + * ab8500_fg_get_property() - get the fg properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the + * fg properties by reading the sysfs files. + * voltage_now: battery voltage + * current_now: battery instant current + * current_avg: battery average current + * charge_full_design: capacity where battery is considered full + * charge_now: battery capacity in nAh + * capacity: capacity in percent + * capacity_level: capacity level + * + * Returns error code in case of failure else 0 on success + */ +static int ab8500_fg_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + /* + * If battery is identified as unknown and charging of unknown + * batteries is disabled, we always report 100% capacity and + * capacity level UNKNOWN, since we can't calculate + * remaining capacity + */ + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (di->flags.bat_ovv) + val->intval = BATT_OVV_VALUE * 1000; + else + val->intval = di->vbat * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = di->inst_curr * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + val->intval = di->avg_curr * 1000; + break; + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + val->intval = ab8500_fg_convert_mah_to_uwh(di, + di->bat_cap.max_mah_design); + break; + case POWER_SUPPLY_PROP_ENERGY_FULL: + val->intval = ab8500_fg_convert_mah_to_uwh(di, + di->bat_cap.max_mah); + break; + case POWER_SUPPLY_PROP_ENERGY_NOW: + if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + di->flags.batt_id_received) + val->intval = ab8500_fg_convert_mah_to_uwh(di, + di->bat_cap.max_mah); + else + val->intval = ab8500_fg_convert_mah_to_uwh(di, + di->bat_cap.prev_mah); + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = di->bat_cap.max_mah_design; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = di->bat_cap.max_mah; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + di->flags.batt_id_received) + val->intval = di->bat_cap.max_mah; + else + val->intval = di->bat_cap.prev_mah; + break; + case POWER_SUPPLY_PROP_CAPACITY: + if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + di->flags.batt_id_received) + val->intval = 100; + else + val->intval = di->bat_cap.prev_percent; + break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + di->flags.batt_id_received) + val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; + else + val->intval = di->bat_cap.prev_level; + break; + default: + return -EINVAL; + } + return 0; +} + +static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_fg *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + + psy = (struct power_supply *)data; + ext = dev_get_drvdata(dev); + di = to_ab8500_fg_device_info(psy); + + /* + * For all psy where the name of your driver + * appears in any supplied_to + */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + if (ext->get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + switch (ret.intval) { + case POWER_SUPPLY_STATUS_UNKNOWN: + case POWER_SUPPLY_STATUS_DISCHARGING: + case POWER_SUPPLY_STATUS_NOT_CHARGING: + if (!di->flags.charging) + break; + di->flags.charging = false; + di->flags.fully_charged = false; + queue_work(di->fg_wq, &di->fg_work); + break; + case POWER_SUPPLY_STATUS_FULL: + if (di->flags.fully_charged) + break; + di->flags.fully_charged = true; + di->flags.force_full = true; + /* Save current capacity as maximum */ + di->bat_cap.max_mah = di->bat_cap.mah; + queue_work(di->fg_wq, &di->fg_work); + break; + case POWER_SUPPLY_STATUS_CHARGING: + if (di->flags.charging) + break; + di->flags.charging = true; + di->flags.fully_charged = false; + queue_work(di->fg_wq, &di->fg_work); + break; + }; + default: + break; + }; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + if (!di->flags.batt_id_received) { + const struct abx500_battery_type *b; + + b = &(di->bat->bat_type[di->bat->batt_id]); + + di->flags.batt_id_received = true; + + di->bat_cap.max_mah_design = + MILLI_TO_MICRO * + b->charge_full_design; + + di->bat_cap.max_mah = + di->bat_cap.max_mah_design; + + di->vbat_nom = b->nominal_voltage; + } + + if (ret.intval) + di->flags.batt_unknown = false; + else + di->flags.batt_unknown = true; + break; + default: + break; + } + break; + case POWER_SUPPLY_PROP_TEMP: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + if (di->flags.batt_id_received) + di->bat_temp = ret.intval; + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_fg_init_hw_registers() - Set up FG related registers + * @di: pointer to the ab8500_fg structure + * + * Set up battery OVV, low battery voltage registers + */ +static int ab8500_fg_init_hw_registers(struct ab8500_fg *di) +{ + int ret; + + /* Set VBAT OVV threshold */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_BATT_OVV, + BATT_OVV_TH_4P75, + BATT_OVV_TH_4P75); + if (ret) { + dev_err(di->dev, "failed to set BATT_OVV\n"); + goto out; + } + + /* Enable VBAT OVV detection */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_BATT_OVV, + BATT_OVV_ENA, + BATT_OVV_ENA); + if (ret) { + dev_err(di->dev, "failed to enable BATT_OVV\n"); + goto out; + } + + /* Low Battery Voltage */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_LOW_BAT_REG, + ab8500_volt_to_regval( + di->bat->fg_params->lowbat_threshold) << 1 | + LOW_BAT_ENABLE); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + goto out; + } + + /* Battery OK threshold */ + ret = ab8500_fg_battok_init_hw_register(di); + if (ret) { + dev_err(di->dev, "BattOk init write failed.\n"); + goto out; + } +out: + return ret; +} + +/** + * ab8500_fg_external_power_changed() - callback for power supply changes + * @psy: pointer to the structure power_supply + * + * This function is the entry point of the pointer external_power_changed + * of the structure power_supply. + * This function gets executed when there is a change in any external power + * supply that this driver needs to be notified of. + */ +static void ab8500_fg_external_power_changed(struct power_supply *psy) +{ + struct ab8500_fg *di = to_ab8500_fg_device_info(psy); + + class_for_each_device(power_supply_class, NULL, + &di->fg_psy, ab8500_fg_get_ext_psy_data); +} + +/** + * abab8500_fg_reinit_work() - work to reset the FG algorithm + * @work: pointer to the work_struct structure + * + * Used to reset the current battery capacity to be able to + * retrigger a new voltage base capacity calculation. For + * test and verification purpose. + */ +static void ab8500_fg_reinit_work(struct work_struct *work) +{ + struct ab8500_fg *di = container_of(work, struct ab8500_fg, + fg_reinit_work.work); + + if (di->flags.calibrate == false) { + dev_dbg(di->dev, "Resetting FG state machine to init.\n"); + ab8500_fg_clear_cap_samples(di); + ab8500_fg_calc_cap_discharge_voltage(di, true); + ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT); + ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT); + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + + } else { + dev_err(di->dev, "Residual offset calibration ongoing " + "retrying..\n"); + /* Wait one second until next try*/ + queue_delayed_work(di->fg_wq, &di->fg_reinit_work, + round_jiffies(1)); + } +} + +/** + * ab8500_fg_reinit() - forces FG algorithm to reinitialize with current values + * + * This function can be used to force the FG algorithm to recalculate a new + * voltage based battery capacity. + */ +void ab8500_fg_reinit(void) +{ + struct ab8500_fg *di = ab8500_fg_get(); + /* User won't be notified if a null pointer returned. */ + if (di != NULL) + queue_delayed_work(di->fg_wq, &di->fg_reinit_work, 0); +} + +/* Exposure to the sysfs interface */ + +struct ab8500_fg_sysfs_entry { + struct attribute attr; + ssize_t (*show)(struct ab8500_fg *, char *); + ssize_t (*store)(struct ab8500_fg *, const char *, size_t); +}; + +static ssize_t charge_full_show(struct ab8500_fg *di, char *buf) +{ + return sprintf(buf, "%d\n", di->bat_cap.max_mah); +} + +static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf, + size_t count) +{ + unsigned long charge_full; + ssize_t ret = -EINVAL; + + ret = strict_strtoul(buf, 10, &charge_full); + + dev_dbg(di->dev, "Ret %zd charge_full %lu", ret, charge_full); + + if (!ret) { + di->bat_cap.max_mah = (int) charge_full; + ret = count; + } + return ret; +} + +static ssize_t charge_now_show(struct ab8500_fg *di, char *buf) +{ + return sprintf(buf, "%d\n", di->bat_cap.prev_mah); +} + +static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf, + size_t count) +{ + unsigned long charge_now; + ssize_t ret; + + ret = strict_strtoul(buf, 10, &charge_now); + + dev_dbg(di->dev, "Ret %zd charge_now %lu was %d", + ret, charge_now, di->bat_cap.prev_mah); + + if (!ret) { + di->bat_cap.user_mah = (int) charge_now; + di->flags.user_cap = true; + ret = count; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + } + return ret; +} + +static struct ab8500_fg_sysfs_entry charge_full_attr = + __ATTR(charge_full, 0644, charge_full_show, charge_full_store); + +static struct ab8500_fg_sysfs_entry charge_now_attr = + __ATTR(charge_now, 0644, charge_now_show, charge_now_store); + +static ssize_t +ab8500_fg_show(struct kobject *kobj, struct attribute *attr, char *buf) +{ + struct ab8500_fg_sysfs_entry *entry; + struct ab8500_fg *di; + + entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr); + di = container_of(kobj, struct ab8500_fg, fg_kobject); + + if (!entry->show) + return -EIO; + + return entry->show(di, buf); +} +static ssize_t +ab8500_fg_store(struct kobject *kobj, struct attribute *attr, const char *buf, + size_t count) +{ + struct ab8500_fg_sysfs_entry *entry; + struct ab8500_fg *di; + + entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr); + di = container_of(kobj, struct ab8500_fg, fg_kobject); + + if (!entry->store) + return -EIO; + + return entry->store(di, buf, count); +} + +static const struct sysfs_ops ab8500_fg_sysfs_ops = { + .show = ab8500_fg_show, + .store = ab8500_fg_store, +}; + +static struct attribute *ab8500_fg_attrs[] = { + &charge_full_attr.attr, + &charge_now_attr.attr, + NULL, +}; + +static struct kobj_type ab8500_fg_ktype = { + .sysfs_ops = &ab8500_fg_sysfs_ops, + .default_attrs = ab8500_fg_attrs, +}; + +/** + * ab8500_chargalg_sysfs_exit() - de-init of sysfs entry + * @di: pointer to the struct ab8500_chargalg + * + * This function removes the entry in sysfs. + */ +static void ab8500_fg_sysfs_exit(struct ab8500_fg *di) +{ + kobject_del(&di->fg_kobject); +} + +/** + * ab8500_chargalg_sysfs_init() - init of sysfs entry + * @di: pointer to the struct ab8500_chargalg + * + * This function adds an entry in sysfs. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_fg_sysfs_init(struct ab8500_fg *di) +{ + int ret = 0; + + ret = kobject_init_and_add(&di->fg_kobject, + &ab8500_fg_ktype, + NULL, "battery"); + if (ret < 0) + dev_err(di->dev, "failed to create sysfs entry\n"); + + return ret; +} +/* Exposure to the sysfs interface <<END>> */ + +#if defined(CONFIG_PM) +static int ab8500_fg_resume(struct platform_device *pdev) +{ + struct ab8500_fg *di = platform_get_drvdata(pdev); + + /* + * Change state if we're not charging. If we're charging we will wake + * up on the FG IRQ + */ + if (!di->flags.charging) { + ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_WAKEUP); + queue_work(di->fg_wq, &di->fg_work); + } + + return 0; +} + +static int ab8500_fg_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_fg *di = platform_get_drvdata(pdev); + + flush_delayed_work(&di->fg_periodic_work); + + /* + * If the FG is enabled we will disable it before going to suspend + * only if we're not charging + */ + if (di->flags.fg_enabled && !di->flags.charging) + ab8500_fg_coulomb_counter(di, false); + + return 0; +} +#else +#define ab8500_fg_suspend NULL +#define ab8500_fg_resume NULL +#endif + +static int __devexit ab8500_fg_remove(struct platform_device *pdev) +{ + int ret = 0; + struct ab8500_fg *di = platform_get_drvdata(pdev); + + list_del(&di->node); + + /* Disable coulomb counter */ + ret = ab8500_fg_coulomb_counter(di, false); + if (ret) + dev_err(di->dev, "failed to disable coulomb counter\n"); + + destroy_workqueue(di->fg_wq); + ab8500_fg_sysfs_exit(di); + + flush_scheduled_work(); + power_supply_unregister(&di->fg_psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + return ret; +} + +/* ab8500 fg driver interrupts and their respective isr */ +static struct ab8500_fg_interrupts ab8500_fg_irq[] = { + {"NCONV_ACCU", ab8500_fg_cc_convend_handler}, + {"BATT_OVV", ab8500_fg_batt_ovv_handler}, + {"LOW_BAT_F", ab8500_fg_lowbatf_handler}, + {"CC_INT_CALIB", ab8500_fg_cc_int_calib_handler}, + {"CCEOC", ab8500_fg_cc_data_end_handler}, +}; + +static int __devinit ab8500_fg_probe(struct platform_device *pdev) +{ + int i, irq; + int ret = 0; + struct abx500_bm_plat_data *plat_data; + + struct ab8500_fg *di = + kzalloc(sizeof(struct ab8500_fg), GFP_KERNEL); + if (!di) + return -ENOMEM; + + mutex_init(&di->cc_lock); + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* get fg specific platform data */ + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->fg; + if (!di->pdata) { + dev_err(di->dev, "no fg platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* get battery specific platform data */ + di->bat = plat_data->battery; + if (!di->bat) { + dev_err(di->dev, "no battery platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + di->fg_psy.name = "ab8500_fg"; + di->fg_psy.type = POWER_SUPPLY_TYPE_BATTERY; + di->fg_psy.properties = ab8500_fg_props; + di->fg_psy.num_properties = ARRAY_SIZE(ab8500_fg_props); + di->fg_psy.get_property = ab8500_fg_get_property; + di->fg_psy.supplied_to = di->pdata->supplied_to; + di->fg_psy.num_supplicants = di->pdata->num_supplicants; + di->fg_psy.external_power_changed = ab8500_fg_external_power_changed; + + di->bat_cap.max_mah_design = MILLI_TO_MICRO * + di->bat->bat_type[di->bat->batt_id].charge_full_design; + + di->bat_cap.max_mah = di->bat_cap.max_mah_design; + + di->vbat_nom = di->bat->bat_type[di->bat->batt_id].nominal_voltage; + + di->init_capacity = true; + + ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT); + ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT); + + /* Create a work queue for running the FG algorithm */ + di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq"); + if (di->fg_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for running the fg algorithm instantly */ + INIT_WORK(&di->fg_work, ab8500_fg_instant_work); + + /* Init work for getting the battery accumulated current */ + INIT_WORK(&di->fg_acc_cur_work, ab8500_fg_acc_cur_work); + + /* Init work for reinitialising the fg algorithm */ + INIT_DELAYED_WORK_DEFERRABLE(&di->fg_reinit_work, + ab8500_fg_reinit_work); + + /* Work delayed Queue to run the state machine */ + INIT_DELAYED_WORK_DEFERRABLE(&di->fg_periodic_work, + ab8500_fg_periodic_work); + + /* Work to check low battery condition */ + INIT_DELAYED_WORK_DEFERRABLE(&di->fg_low_bat_work, + ab8500_fg_low_bat_work); + + /* Init work for HW failure check */ + INIT_DELAYED_WORK_DEFERRABLE(&di->fg_check_hw_failure_work, + ab8500_fg_check_hw_failure_work); + + /* Initialize OVV, and other registers */ + ret = ab8500_fg_init_hw_registers(di); + if (ret) { + dev_err(di->dev, "failed to initialize registers\n"); + goto free_inst_curr_wq; + } + + /* Consider battery unknown until we're informed otherwise */ + di->flags.batt_unknown = true; + di->flags.batt_id_received = false; + + /* Register FG power supply class */ + ret = power_supply_register(di->dev, &di->fg_psy); + if (ret) { + dev_err(di->dev, "failed to register FG psy\n"); + goto free_inst_curr_wq; + } + + di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer); + ab8500_fg_coulomb_counter(di, true); + + /* Initialize completion used to notify completion of inst current */ + init_completion(&di->ab8500_fg_complete); + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_fg_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_fg_irq[i].name, di); + + if (ret != 0) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_fg_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_fg_irq[i].name, irq, ret); + } + di->irq = platform_get_irq_byname(pdev, "CCEOC"); + disable_irq(di->irq); + + platform_set_drvdata(pdev, di); + + ret = ab8500_fg_sysfs_init(di); + if (ret) { + dev_err(di->dev, "failed to create sysfs entry\n"); + goto free_irq; + } + + /* Calibrate the fg first time */ + di->flags.calibrate = true; + di->calib_state = AB8500_FG_CALIB_INIT; + + /* Use room temp as default value until we get an update from driver. */ + di->bat_temp = 210; + + /* Run the FG algorithm */ + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + + list_add_tail(&di->node, &ab8500_fg_list); + + return ret; + +free_irq: + power_supply_unregister(&di->fg_psy); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name); + free_irq(irq, di); + } +free_inst_curr_wq: + destroy_workqueue(di->fg_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver ab8500_fg_driver = { + .probe = ab8500_fg_probe, + .remove = __devexit_p(ab8500_fg_remove), + .suspend = ab8500_fg_suspend, + .resume = ab8500_fg_resume, + .driver = { + .name = "ab8500-fg", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_fg_init(void) +{ + return platform_driver_register(&ab8500_fg_driver); +} + +static void __exit ab8500_fg_exit(void) +{ + platform_driver_unregister(&ab8500_fg_driver); +} + +subsys_initcall_sync(ab8500_fg_init); +module_exit(ab8500_fg_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski"); +MODULE_ALIAS("platform:ab8500-fg"); +MODULE_DESCRIPTION("AB8500 Fuel Gauge driver"); diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c new file mode 100644 index 0000000..804b88c --- /dev/null +++ b/drivers/power/abx500_chargalg.c @@ -0,0 +1,1921 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Charging algorithm driver for abx500 variants + * + * License Terms: GNU General Public License v2 + * Authors: + * Johan Palsson <johan.palsson@stericsson.com> + * Karl Komierowski <karl.komierowski@stericsson.com> + * Arun R Murthy <arun.murthy@stericsson.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/completion.h> +#include <linux/workqueue.h> +#include <linux/kobject.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ux500_chargalg.h> +#include <linux/mfd/abx500/ab8500-bm.h> + +/* Watchdog kick interval */ +#define CHG_WD_INTERVAL (6 * HZ) + +/* End-of-charge criteria counter */ +#define EOC_COND_CNT 10 + +/* Recharge criteria counter */ +#define RCH_COND_CNT 3 + +#define to_abx500_chargalg_device_info(x) container_of((x), \ + struct abx500_chargalg, chargalg_psy); + +enum abx500_chargers { + NO_CHG, + AC_CHG, + USB_CHG, +}; + +struct abx500_chargalg_charger_info { + enum abx500_chargers conn_chg; + enum abx500_chargers prev_conn_chg; + enum abx500_chargers online_chg; + enum abx500_chargers prev_online_chg; + enum abx500_chargers charger_type; + bool usb_chg_ok; + bool ac_chg_ok; + int usb_volt; + int usb_curr; + int ac_volt; + int ac_curr; + int usb_vset; + int usb_iset; + int ac_vset; + int ac_iset; +}; + +struct abx500_chargalg_suspension_status { + bool suspended_change; + bool ac_suspended; + bool usb_suspended; +}; + +struct abx500_chargalg_battery_data { + int temp; + int volt; + int avg_curr; + int inst_curr; + int percent; +}; + +enum abx500_chargalg_states { + STATE_HANDHELD_INIT, + STATE_HANDHELD, + STATE_CHG_NOT_OK_INIT, + STATE_CHG_NOT_OK, + STATE_HW_TEMP_PROTECT_INIT, + STATE_HW_TEMP_PROTECT, + STATE_NORMAL_INIT, + STATE_NORMAL, + STATE_WAIT_FOR_RECHARGE_INIT, + STATE_WAIT_FOR_RECHARGE, + STATE_MAINTENANCE_A_INIT, + STATE_MAINTENANCE_A, + STATE_MAINTENANCE_B_INIT, + STATE_MAINTENANCE_B, + STATE_TEMP_UNDEROVER_INIT, + STATE_TEMP_UNDEROVER, + STATE_TEMP_LOWHIGH_INIT, + STATE_TEMP_LOWHIGH, + STATE_SUSPENDED_INIT, + STATE_SUSPENDED, + STATE_OVV_PROTECT_INIT, + STATE_OVV_PROTECT, + STATE_SAFETY_TIMER_EXPIRED_INIT, + STATE_SAFETY_TIMER_EXPIRED, + STATE_BATT_REMOVED_INIT, + STATE_BATT_REMOVED, + STATE_WD_EXPIRED_INIT, + STATE_WD_EXPIRED, +}; + +static const char *states[] = { + "HANDHELD_INIT", + "HANDHELD", + "CHG_NOT_OK_INIT", + "CHG_NOT_OK", + "HW_TEMP_PROTECT_INIT", + "HW_TEMP_PROTECT", + "NORMAL_INIT", + "NORMAL", + "WAIT_FOR_RECHARGE_INIT", + "WAIT_FOR_RECHARGE", + "MAINTENANCE_A_INIT", + "MAINTENANCE_A", + "MAINTENANCE_B_INIT", + "MAINTENANCE_B", + "TEMP_UNDEROVER_INIT", + "TEMP_UNDEROVER", + "TEMP_LOWHIGH_INIT", + "TEMP_LOWHIGH", + "SUSPENDED_INIT", + "SUSPENDED", + "OVV_PROTECT_INIT", + "OVV_PROTECT", + "SAFETY_TIMER_EXPIRED_INIT", + "SAFETY_TIMER_EXPIRED", + "BATT_REMOVED_INIT", + "BATT_REMOVED", + "WD_EXPIRED_INIT", + "WD_EXPIRED", +}; + +struct abx500_chargalg_events { + bool batt_unknown; + bool mainextchnotok; + bool batt_ovv; + bool batt_rem; + bool btemp_underover; + bool btemp_lowhigh; + bool main_thermal_prot; + bool usb_thermal_prot; + bool main_ovv; + bool vbus_ovv; + bool usbchargernotok; + bool safety_timer_expired; + bool maintenance_timer_expired; + bool ac_wd_expired; + bool usb_wd_expired; + bool ac_cv_active; + bool usb_cv_active; + bool vbus_collapsed; +}; + +/** + * struct abx500_charge_curr_maximization - Charger maximization parameters + * @original_iset: the non optimized/maximised charger current + * @current_iset: the charging current used at this moment + * @test_delta_i: the delta between the current we want to charge and the + current that is really going into the battery + * @condition_cnt: number of iterations needed before a new charger current + is set + * @max_current: maximum charger current + * @wait_cnt: to avoid too fast current step down in case of charger + * voltage collapse, we insert this delay between step + * down + * @level: tells in how many steps the charging current has been + increased + */ +struct abx500_charge_curr_maximization { + int original_iset; + int current_iset; + int test_delta_i; + int condition_cnt; + int max_current; + int wait_cnt; + u8 level; +}; + +enum maxim_ret { + MAXIM_RET_NOACTION, + MAXIM_RET_CHANGE, + MAXIM_RET_IBAT_TOO_HIGH, +}; + +/** + * struct abx500_chargalg - abx500 Charging algorithm device information + * @dev: pointer to the structure device + * @charge_status: battery operating status + * @eoc_cnt: counter used to determine end-of_charge + * @rch_cnt: counter used to determine start of recharge + * @maintenance_chg: indicate if maintenance charge is active + * @t_hyst_norm temperature hysteresis when the temperature has been + * over or under normal limits + * @t_hyst_lowhigh temperature hysteresis when the temperature has been + * over or under the high or low limits + * @charge_state: current state of the charging algorithm + * @ccm charging current maximization parameters + * @chg_info: information about connected charger types + * @batt_data: data of the battery + * @susp_status: current charger suspension status + * @pdata: pointer to the abx500_chargalg platform data + * @bat: pointer to the abx500_bm platform data + * @chargalg_psy: structure that holds the battery properties exposed by + * the charging algorithm + * @events: structure for information about events triggered + * @chargalg_wq: work queue for running the charging algorithm + * @chargalg_periodic_work: work to run the charging algorithm periodically + * @chargalg_wd_work: work to kick the charger watchdog periodically + * @chargalg_work: work to run the charging algorithm instantly + * @safety_timer: charging safety timer + * @maintenance_timer: maintenance charging timer + * @chargalg_kobject: structure of type kobject + */ +struct abx500_chargalg { + struct device *dev; + int charge_status; + int eoc_cnt; + int rch_cnt; + bool maintenance_chg; + int t_hyst_norm; + int t_hyst_lowhigh; + enum abx500_chargalg_states charge_state; + struct abx500_charge_curr_maximization ccm; + struct abx500_chargalg_charger_info chg_info; + struct abx500_chargalg_battery_data batt_data; + struct abx500_chargalg_suspension_status susp_status; + struct abx500_chargalg_platform_data *pdata; + struct abx500_bm_data *bat; + struct power_supply chargalg_psy; + struct ux500_charger *ac_chg; + struct ux500_charger *usb_chg; + struct abx500_chargalg_events events; + struct workqueue_struct *chargalg_wq; + struct delayed_work chargalg_periodic_work; + struct delayed_work chargalg_wd_work; + struct work_struct chargalg_work; + struct timer_list safety_timer; + struct timer_list maintenance_timer; + struct kobject chargalg_kobject; +}; + +/* Main battery properties */ +static enum power_supply_property abx500_chargalg_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, +}; + +/** + * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer + * @data: pointer to the abx500_chargalg structure + * + * This function gets called when the safety timer for the charger + * expires + */ +static void abx500_chargalg_safety_timer_expired(unsigned long data) +{ + struct abx500_chargalg *di = (struct abx500_chargalg *) data; + dev_err(di->dev, "Safety timer expired\n"); + di->events.safety_timer_expired = true; + + /* Trigger execution of the algorithm instantly */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_maintenance_timer_expired() - Expiration of + * the maintenance timer + * @i: pointer to the abx500_chargalg structure + * + * This function gets called when the maintenence timer + * expires + */ +static void abx500_chargalg_maintenance_timer_expired(unsigned long data) +{ + + struct abx500_chargalg *di = (struct abx500_chargalg *) data; + dev_dbg(di->dev, "Maintenance timer expired\n"); + di->events.maintenance_timer_expired = true; + + /* Trigger execution of the algorithm instantly */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_state_to() - Change charge state + * @di: pointer to the abx500_chargalg structure + * + * This function gets called when a charge state change should occur + */ +static void abx500_chargalg_state_to(struct abx500_chargalg *di, + enum abx500_chargalg_states state) +{ + dev_dbg(di->dev, + "State changed: %s (From state: [%d] %s =to=> [%d] %s )\n", + di->charge_state == state ? "NO" : "YES", + di->charge_state, + states[di->charge_state], + state, + states[state]); + + di->charge_state = state; +} + +/** + * abx500_chargalg_check_charger_connection() - Check charger connection change + * @di: pointer to the abx500_chargalg structure + * + * This function will check if there is a change in the charger connection + * and change charge state accordingly. AC has precedence over USB. + */ +static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di) +{ + if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg || + di->susp_status.suspended_change) { + /* + * Charger state changed or suspension + * has changed since last update + */ + if ((di->chg_info.conn_chg & AC_CHG) && + !di->susp_status.ac_suspended) { + dev_dbg(di->dev, "Charging source is AC\n"); + if (di->chg_info.charger_type != AC_CHG) { + di->chg_info.charger_type = AC_CHG; + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } + } else if ((di->chg_info.conn_chg & USB_CHG) && + !di->susp_status.usb_suspended) { + dev_dbg(di->dev, "Charging source is USB\n"); + di->chg_info.charger_type = USB_CHG; + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } else if (di->chg_info.conn_chg && + (di->susp_status.ac_suspended || + di->susp_status.usb_suspended)) { + dev_dbg(di->dev, "Charging is suspended\n"); + di->chg_info.charger_type = NO_CHG; + abx500_chargalg_state_to(di, STATE_SUSPENDED_INIT); + } else { + dev_dbg(di->dev, "Charging source is OFF\n"); + di->chg_info.charger_type = NO_CHG; + abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); + } + di->chg_info.prev_conn_chg = di->chg_info.conn_chg; + di->susp_status.suspended_change = false; + } + return di->chg_info.conn_chg; +} + +/** + * abx500_chargalg_start_safety_timer() - Start charging safety timer + * @di: pointer to the abx500_chargalg structure + * + * The safety timer is used to avoid overcharging of old or bad batteries. + * There are different timers for AC and USB + */ +static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) +{ + unsigned long timer_expiration = 0; + + switch (di->chg_info.charger_type) { + case AC_CHG: + timer_expiration = + round_jiffies(jiffies + + (di->bat->main_safety_tmr_h * 3600 * HZ)); + break; + + case USB_CHG: + timer_expiration = + round_jiffies(jiffies + + (di->bat->usb_safety_tmr_h * 3600 * HZ)); + break; + + default: + dev_err(di->dev, "Unknown charger to charge from\n"); + break; + } + + di->events.safety_timer_expired = false; + di->safety_timer.expires = timer_expiration; + if (!timer_pending(&di->safety_timer)) + add_timer(&di->safety_timer); + else + mod_timer(&di->safety_timer, timer_expiration); +} + +/** + * abx500_chargalg_stop_safety_timer() - Stop charging safety timer + * @di: pointer to the abx500_chargalg structure + * + * The safety timer is stopped whenever the NORMAL state is exited + */ +static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di) +{ + di->events.safety_timer_expired = false; + del_timer(&di->safety_timer); +} + +/** + * abx500_chargalg_start_maintenance_timer() - Start charging maintenance timer + * @di: pointer to the abx500_chargalg structure + * @duration: duration of ther maintenance timer in hours + * + * The maintenance timer is used to maintain the charge in the battery once + * the battery is considered full. These timers are chosen to match the + * discharge curve of the battery + */ +static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di, + int duration) +{ + unsigned long timer_expiration; + + /* Convert from hours to jiffies */ + timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ)); + + di->events.maintenance_timer_expired = false; + di->maintenance_timer.expires = timer_expiration; + if (!timer_pending(&di->maintenance_timer)) + add_timer(&di->maintenance_timer); + else + mod_timer(&di->maintenance_timer, timer_expiration); +} + +/** + * abx500_chargalg_stop_maintenance_timer() - Stop maintenance timer + * @di: pointer to the abx500_chargalg structure + * + * The maintenance timer is stopped whenever maintenance ends or when another + * state is entered + */ +static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di) +{ + di->events.maintenance_timer_expired = false; + del_timer(&di->maintenance_timer); +} + +/** + * abx500_chargalg_kick_watchdog() - Kick charger watchdog + * @di: pointer to the abx500_chargalg structure + * + * The charger watchdog have to be kicked periodically whenever the charger is + * on, else the ABB will reset the system + */ +static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di) +{ + /* Check if charger exists and kick watchdog if charging */ + if (di->ac_chg && di->ac_chg->ops.kick_wd && + di->chg_info.online_chg & AC_CHG) + return di->ac_chg->ops.kick_wd(di->ac_chg); + else if (di->usb_chg && di->usb_chg->ops.kick_wd && + di->chg_info.online_chg & USB_CHG) + return di->usb_chg->ops.kick_wd(di->usb_chg); + + return -ENXIO; +} + +/** + * abx500_chargalg_ac_en() - Turn on/off the AC charger + * @di: pointer to the abx500_chargalg structure + * @enable: charger on/off + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * The AC charger will be turned on/off with the requested charge voltage and + * current + */ +static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable, + int vset, int iset) +{ + if (!di->ac_chg || !di->ac_chg->ops.enable) + return -ENXIO; + + /* Select maximum of what both the charger and the battery supports */ + if (di->ac_chg->max_out_volt) + vset = min(vset, di->ac_chg->max_out_volt); + if (di->ac_chg->max_out_curr) + iset = min(iset, di->ac_chg->max_out_curr); + + di->chg_info.ac_iset = iset; + di->chg_info.ac_vset = vset; + + return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset); +} + +/** + * abx500_chargalg_usb_en() - Turn on/off the USB charger + * @di: pointer to the abx500_chargalg structure + * @enable: charger on/off + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * The USB charger will be turned on/off with the requested charge voltage and + * current + */ +static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable, + int vset, int iset) +{ + if (!di->usb_chg || !di->usb_chg->ops.enable) + return -ENXIO; + + /* Select maximum of what both the charger and the battery supports */ + if (di->usb_chg->max_out_volt) + vset = min(vset, di->usb_chg->max_out_volt); + if (di->usb_chg->max_out_curr) + iset = min(iset, di->usb_chg->max_out_curr); + + di->chg_info.usb_iset = iset; + di->chg_info.usb_vset = vset; + + return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset); +} + +/** + * abx500_chargalg_update_chg_curr() - Update charger current + * @di: pointer to the abx500_chargalg structure + * @iset: requested charger output current + * + * The charger output current will be updated for the charger + * that is currently in use + */ +static int abx500_chargalg_update_chg_curr(struct abx500_chargalg *di, + int iset) +{ + /* Check if charger exists and update current if charging */ + if (di->ac_chg && di->ac_chg->ops.update_curr && + di->chg_info.charger_type & AC_CHG) { + /* + * Select maximum of what both the charger + * and the battery supports + */ + if (di->ac_chg->max_out_curr) + iset = min(iset, di->ac_chg->max_out_curr); + + di->chg_info.ac_iset = iset; + + return di->ac_chg->ops.update_curr(di->ac_chg, iset); + } else if (di->usb_chg && di->usb_chg->ops.update_curr && + di->chg_info.charger_type & USB_CHG) { + /* + * Select maximum of what both the charger + * and the battery supports + */ + if (di->usb_chg->max_out_curr) + iset = min(iset, di->usb_chg->max_out_curr); + + di->chg_info.usb_iset = iset; + + return di->usb_chg->ops.update_curr(di->usb_chg, iset); + } + + return -ENXIO; +} + +/** + * abx500_chargalg_stop_charging() - Stop charging + * @di: pointer to the abx500_chargalg structure + * + * This function is called from any state where charging should be stopped. + * All charging is disabled and all status parameters and timers are changed + * accordingly + */ +static void abx500_chargalg_stop_charging(struct abx500_chargalg *di) +{ + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + di->maintenance_chg = false; + cancel_delayed_work(&di->chargalg_wd_work); + power_supply_changed(&di->chargalg_psy); +} + +/** + * abx500_chargalg_hold_charging() - Pauses charging + * @di: pointer to the abx500_chargalg structure + * + * This function is called in the case where maintenance charging has been + * disabled and instead a battery voltage mode is entered to check when the + * battery voltage has reached a certain recharge voltage + */ +static void abx500_chargalg_hold_charging(struct abx500_chargalg *di) +{ + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + di->maintenance_chg = false; + cancel_delayed_work(&di->chargalg_wd_work); + power_supply_changed(&di->chargalg_psy); +} + +/** + * abx500_chargalg_start_charging() - Start the charger + * @di: pointer to the abx500_chargalg structure + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * A charger will be enabled depending on the requested charger type that was + * detected previously. + */ +static void abx500_chargalg_start_charging(struct abx500_chargalg *di, + int vset, int iset) +{ + switch (di->chg_info.charger_type) { + case AC_CHG: + dev_dbg(di->dev, + "AC parameters: Vset %d, Ich %d\n", vset, iset); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_ac_en(di, true, vset, iset); + break; + + case USB_CHG: + dev_dbg(di->dev, + "USB parameters: Vset %d, Ich %d\n", vset, iset); + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, true, vset, iset); + break; + + default: + dev_err(di->dev, "Unknown charger to charge from\n"); + break; + } +} + +/** + * abx500_chargalg_check_temp() - Check battery temperature ranges + * @di: pointer to the abx500_chargalg structure + * + * The battery temperature is checked against the predefined limits and the + * charge state is changed accordingly + */ +static void abx500_chargalg_check_temp(struct abx500_chargalg *di) +{ + if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) && + di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) { + /* Temp OK! */ + di->events.btemp_underover = false; + di->events.btemp_lowhigh = false; + di->t_hyst_norm = 0; + di->t_hyst_lowhigh = 0; + } else { + if (((di->batt_data.temp >= di->bat->temp_high) && + (di->batt_data.temp < + (di->bat->temp_over - di->t_hyst_lowhigh))) || + ((di->batt_data.temp > + (di->bat->temp_under + di->t_hyst_lowhigh)) && + (di->batt_data.temp <= di->bat->temp_low))) { + /* TEMP minor!!!!! */ + di->events.btemp_underover = false; + di->events.btemp_lowhigh = true; + di->t_hyst_norm = di->bat->temp_hysteresis; + di->t_hyst_lowhigh = 0; + } else if (di->batt_data.temp <= di->bat->temp_under || + di->batt_data.temp >= di->bat->temp_over) { + /* TEMP major!!!!! */ + di->events.btemp_underover = true; + di->events.btemp_lowhigh = false; + di->t_hyst_norm = 0; + di->t_hyst_lowhigh = di->bat->temp_hysteresis; + } else { + /* Within hysteresis */ + dev_dbg(di->dev, "Within hysteresis limit temp: %d " + "hyst_lowhigh %d, hyst normal %d\n", + di->batt_data.temp, di->t_hyst_lowhigh, + di->t_hyst_norm); + } + } +} + +/** + * abx500_chargalg_check_charger_voltage() - Check charger voltage + * @di: pointer to the abx500_chargalg structure + * + * Charger voltage is checked against maximum limit + */ +static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di) +{ + if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max) + di->chg_info.usb_chg_ok = false; + else + di->chg_info.usb_chg_ok = true; + + if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max) + di->chg_info.ac_chg_ok = false; + else + di->chg_info.ac_chg_ok = true; + +} + +/** + * abx500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled + * @di: pointer to the abx500_chargalg structure + * + * End-of-charge criteria is fulfilled when the battery voltage is above a + * certain limit and the battery current is below a certain limit for a + * predefined number of consecutive seconds. If true, the battery is full + */ +static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) +{ + if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING && + di->charge_state == STATE_NORMAL && + !di->maintenance_chg && (di->batt_data.volt >= + di->bat->bat_type[di->bat->batt_id].termination_vol || + di->events.usb_cv_active || di->events.ac_cv_active) && + di->batt_data.avg_curr < + di->bat->bat_type[di->bat->batt_id].termination_curr && + di->batt_data.avg_curr > 0) { + if (++di->eoc_cnt >= EOC_COND_CNT) { + di->eoc_cnt = 0; + di->charge_status = POWER_SUPPLY_STATUS_FULL; + di->maintenance_chg = true; + dev_dbg(di->dev, "EOC reached!\n"); + power_supply_changed(&di->chargalg_psy); + } else { + dev_dbg(di->dev, + " EOC limit reached for the %d" + " time, out of %d before EOC\n", + di->eoc_cnt, + EOC_COND_CNT); + } + } else { + di->eoc_cnt = 0; + } +} + +static void init_maxim_chg_curr(struct abx500_chargalg *di) +{ + di->ccm.original_iset = + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; + di->ccm.current_iset = + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; + di->ccm.test_delta_i = di->bat->maxi->charger_curr_step; + di->ccm.max_current = di->bat->maxi->chg_curr; + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.level = 0; +} + +/** + * abx500_chargalg_chg_curr_maxim - increases the charger current to + * compensate for the system load + * @di pointer to the abx500_chargalg structure + * + * This maximization function is used to raise the charger current to get the + * battery current as close to the optimal value as possible. The battery + * current during charging is affected by the system load + */ +static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) +{ + int delta_i; + + if (!di->bat->maxi->ena_maxi) + return MAXIM_RET_NOACTION; + + delta_i = di->ccm.original_iset - di->batt_data.inst_curr; + + if (di->events.vbus_collapsed) { + dev_dbg(di->dev, "Charger voltage has collapsed %d\n", + di->ccm.wait_cnt); + if (di->ccm.wait_cnt == 0) { + dev_dbg(di->dev, "lowering current\n"); + di->ccm.wait_cnt++; + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.max_current = + di->ccm.current_iset - di->ccm.test_delta_i; + di->ccm.current_iset = di->ccm.max_current; + di->ccm.level--; + return MAXIM_RET_CHANGE; + } else { + dev_dbg(di->dev, "waiting\n"); + /* Let's go in here twice before lowering curr again */ + di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3; + return MAXIM_RET_NOACTION; + } + } + + di->ccm.wait_cnt = 0; + + if ((di->batt_data.inst_curr > di->ccm.original_iset)) { + dev_dbg(di->dev, " Maximization Ibat (%dmA) too high" + " (limit %dmA) (current iset: %dmA)!\n", + di->batt_data.inst_curr, di->ccm.original_iset, + di->ccm.current_iset); + + if (di->ccm.current_iset == di->ccm.original_iset) + return MAXIM_RET_NOACTION; + + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.current_iset = di->ccm.original_iset; + di->ccm.level = 0; + + return MAXIM_RET_IBAT_TOO_HIGH; + } + + if (delta_i > di->ccm.test_delta_i && + (di->ccm.current_iset + di->ccm.test_delta_i) < + di->ccm.max_current) { + if (di->ccm.condition_cnt-- == 0) { + /* Increse the iset with cco.test_delta_i */ + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.current_iset += di->ccm.test_delta_i; + di->ccm.level++; + dev_dbg(di->dev, " Maximization needed, increase" + " with %d mA to %dmA (Optimal ibat: %d)" + " Level %d\n", + di->ccm.test_delta_i, + di->ccm.current_iset, + di->ccm.original_iset, + di->ccm.level); + return MAXIM_RET_CHANGE; + } else { + return MAXIM_RET_NOACTION; + } + } else { + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + return MAXIM_RET_NOACTION; + } +} + +static void handle_maxim_chg_curr(struct abx500_chargalg *di) +{ + enum maxim_ret ret; + int result; + + ret = abx500_chargalg_chg_curr_maxim(di); + switch (ret) { + case MAXIM_RET_CHANGE: + result = abx500_chargalg_update_chg_curr(di, + di->ccm.current_iset); + if (result) + dev_err(di->dev, "failed to set chg curr\n"); + break; + case MAXIM_RET_IBAT_TOO_HIGH: + result = abx500_chargalg_update_chg_curr(di, + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + if (result) + dev_err(di->dev, "failed to set chg curr\n"); + break; + + case MAXIM_RET_NOACTION: + default: + /* Do nothing..*/ + break; + } +} + +static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct abx500_chargalg *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + + psy = (struct power_supply *)data; + ext = dev_get_drvdata(dev); + di = to_abx500_chargalg_device_info(psy); + /* For all psy where the driver name appears in any supplied_to */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + /* Initialize chargers if not already done */ + if (!di->ac_chg && + ext->type == POWER_SUPPLY_TYPE_MAINS) + di->ac_chg = psy_to_ux500_charger(ext); + else if (!di->usb_chg && + ext->type == POWER_SUPPLY_TYPE_USB) + di->usb_chg = psy_to_ux500_charger(ext); + + if (ext->get_property(ext, prop, &ret)) + continue; + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + /* Battery present */ + if (ret.intval) + di->events.batt_rem = false; + /* Battery removed */ + else + di->events.batt_rem = true; + break; + case POWER_SUPPLY_TYPE_MAINS: + /* AC disconnected */ + if (!ret.intval && + (di->chg_info.conn_chg & AC_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg &= ~AC_CHG; + } + /* AC connected */ + else if (ret.intval && + !(di->chg_info.conn_chg & AC_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg |= AC_CHG; + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB disconnected */ + if (!ret.intval && + (di->chg_info.conn_chg & USB_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg &= ~USB_CHG; + } + /* USB connected */ + else if (ret.intval && + !(di->chg_info.conn_chg & USB_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg |= USB_CHG; + } + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_ONLINE: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + break; + case POWER_SUPPLY_TYPE_MAINS: + /* AC offline */ + if (!ret.intval && + (di->chg_info.online_chg & AC_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg &= ~AC_CHG; + } + /* AC online */ + else if (ret.intval && + !(di->chg_info.online_chg & AC_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg |= AC_CHG; + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, 0); + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB offline */ + if (!ret.intval && + (di->chg_info.online_chg & USB_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg &= ~USB_CHG; + } + /* USB online */ + else if (ret.intval && + !(di->chg_info.online_chg & USB_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg |= USB_CHG; + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, 0); + } + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_HEALTH: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + break; + case POWER_SUPPLY_TYPE_MAINS: + switch (ret.intval) { + case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: + di->events.mainextchnotok = true; + di->events.main_thermal_prot = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_DEAD: + di->events.ac_wd_expired = true; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.main_thermal_prot = false; + break; + case POWER_SUPPLY_HEALTH_COLD: + case POWER_SUPPLY_HEALTH_OVERHEAT: + di->events.main_thermal_prot = true; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_OVERVOLTAGE: + di->events.main_ovv = true; + di->events.mainextchnotok = false; + di->events.main_thermal_prot = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_GOOD: + di->events.main_thermal_prot = false; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + default: + break; + } + break; + + case POWER_SUPPLY_TYPE_USB: + switch (ret.intval) { + case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: + di->events.usbchargernotok = true; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_DEAD: + di->events.usb_wd_expired = true; + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + break; + case POWER_SUPPLY_HEALTH_COLD: + case POWER_SUPPLY_HEALTH_OVERHEAT: + di->events.usb_thermal_prot = true; + di->events.usbchargernotok = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_OVERVOLTAGE: + di->events.vbus_ovv = true; + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_GOOD: + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + default: + break; + } + default: + break; + } + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.volt = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_MAINS: + di->chg_info.ac_volt = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + di->chg_info.usb_volt = ret.intval / 1000; + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + switch (ext->type) { + case POWER_SUPPLY_TYPE_MAINS: + /* AVG is used to indicate when we are + * in CV mode */ + if (ret.intval) + di->events.ac_cv_active = true; + else + di->events.ac_cv_active = false; + + break; + case POWER_SUPPLY_TYPE_USB: + /* AVG is used to indicate when we are + * in CV mode */ + if (ret.intval) + di->events.usb_cv_active = true; + else + di->events.usb_cv_active = false; + + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + if (ret.intval) + di->events.batt_unknown = false; + else + di->events.batt_unknown = true; + + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_TEMP: + di->batt_data.temp = ret.intval / 10; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_MAINS: + di->chg_info.ac_curr = + ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + di->chg_info.usb_curr = + ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.inst_curr = ret.intval / 1000; + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_CURRENT_AVG: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.avg_curr = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + if (ret.intval) + di->events.vbus_collapsed = true; + else + di->events.vbus_collapsed = false; + break; + default: + break; + } + break; + case POWER_SUPPLY_PROP_CAPACITY: + di->batt_data.percent = ret.intval; + break; + default: + break; + } + } + return 0; +} + +/** + * abx500_chargalg_external_power_changed() - callback for power supply changes + * @psy: pointer to the structure power_supply + * + * This function is the entry point of the pointer external_power_changed + * of the structure power_supply. + * This function gets executed when there is a change in any external power + * supply that this driver needs to be notified of. + */ +static void abx500_chargalg_external_power_changed(struct power_supply *psy) +{ + struct abx500_chargalg *di = to_abx500_chargalg_device_info(psy); + + /* + * Trigger execution of the algorithm instantly and read + * all power_supply properties there instead + */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_algorithm() - Main function for the algorithm + * @di: pointer to the abx500_chargalg structure + * + * This is the main control function for the charging algorithm. + * It is called periodically or when something happens that will + * trigger a state change + */ +static void abx500_chargalg_algorithm(struct abx500_chargalg *di) +{ + int charger_status; + + /* Collect data from all power_supply class devices */ + class_for_each_device(power_supply_class, NULL, + &di->chargalg_psy, abx500_chargalg_get_ext_psy_data); + + abx500_chargalg_end_of_charge(di); + abx500_chargalg_check_temp(di); + abx500_chargalg_check_charger_voltage(di); + + charger_status = abx500_chargalg_check_charger_connection(di); + /* + * First check if we have a charger connected. + * Also we don't allow charging of unknown batteries if configured + * this way + */ + if (!charger_status || + (di->events.batt_unknown && !di->bat->chg_unknown_bat)) { + if (di->charge_state != STATE_HANDHELD) { + di->events.safety_timer_expired = false; + abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); + } + } + + /* If suspended, we should not continue checking the flags */ + else if (di->charge_state == STATE_SUSPENDED_INIT || + di->charge_state == STATE_SUSPENDED) { + /* We don't do anything here, just don,t continue */ + } + + /* Safety timer expiration */ + else if (di->events.safety_timer_expired) { + if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED) + abx500_chargalg_state_to(di, + STATE_SAFETY_TIMER_EXPIRED_INIT); + } + /* + * Check if any interrupts has occured + * that will prevent us from charging + */ + + /* Battery removed */ + else if (di->events.batt_rem) { + if (di->charge_state != STATE_BATT_REMOVED) + abx500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT); + } + /* Main or USB charger not ok. */ + else if (di->events.mainextchnotok || di->events.usbchargernotok) { + /* + * If vbus_collapsed is set, we have to lower the charger + * current, which is done in the normal state below + */ + if (di->charge_state != STATE_CHG_NOT_OK && + !di->events.vbus_collapsed) + abx500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT); + } + /* VBUS, Main or VBAT OVV. */ + else if (di->events.vbus_ovv || + di->events.main_ovv || + di->events.batt_ovv || + !di->chg_info.usb_chg_ok || + !di->chg_info.ac_chg_ok) { + if (di->charge_state != STATE_OVV_PROTECT) + abx500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT); + } + /* USB Thermal, stop charging */ + else if (di->events.main_thermal_prot || + di->events.usb_thermal_prot) { + if (di->charge_state != STATE_HW_TEMP_PROTECT) + abx500_chargalg_state_to(di, + STATE_HW_TEMP_PROTECT_INIT); + } + /* Battery temp over/under */ + else if (di->events.btemp_underover) { + if (di->charge_state != STATE_TEMP_UNDEROVER) + abx500_chargalg_state_to(di, + STATE_TEMP_UNDEROVER_INIT); + } + /* Watchdog expired */ + else if (di->events.ac_wd_expired || + di->events.usb_wd_expired) { + if (di->charge_state != STATE_WD_EXPIRED) + abx500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT); + } + /* Battery temp high/low */ + else if (di->events.btemp_lowhigh) { + if (di->charge_state != STATE_TEMP_LOWHIGH) + abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT); + } + + dev_dbg(di->dev, + "[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d " + "State %s Active_chg %d Chg_status %d AC %d USB %d " + "AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d " + "USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n", + di->batt_data.volt, + di->batt_data.avg_curr, + di->batt_data.inst_curr, + di->batt_data.temp, + di->batt_data.percent, + di->maintenance_chg, + states[di->charge_state], + di->chg_info.charger_type, + di->charge_status, + di->chg_info.conn_chg & AC_CHG, + di->chg_info.conn_chg & USB_CHG, + di->chg_info.online_chg & AC_CHG, + di->chg_info.online_chg & USB_CHG, + di->events.ac_cv_active, + di->events.usb_cv_active, + di->chg_info.ac_curr, + di->chg_info.usb_curr, + di->chg_info.ac_vset, + di->chg_info.ac_iset, + di->chg_info.usb_vset, + di->chg_info.usb_iset); + + switch (di->charge_state) { + case STATE_HANDHELD_INIT: + abx500_chargalg_stop_charging(di); + di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING; + abx500_chargalg_state_to(di, STATE_HANDHELD); + /* Intentional fallthrough */ + + case STATE_HANDHELD: + break; + + case STATE_SUSPENDED_INIT: + if (di->susp_status.ac_suspended) + abx500_chargalg_ac_en(di, false, 0, 0); + if (di->susp_status.usb_suspended) + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + di->maintenance_chg = false; + abx500_chargalg_state_to(di, STATE_SUSPENDED); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough */ + + case STATE_SUSPENDED: + /* CHARGING is suspended */ + break; + + case STATE_BATT_REMOVED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_BATT_REMOVED); + /* Intentional fallthrough */ + + case STATE_BATT_REMOVED: + if (!di->events.batt_rem) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_HW_TEMP_PROTECT_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT); + /* Intentional fallthrough */ + + case STATE_HW_TEMP_PROTECT: + if (!di->events.main_thermal_prot && + !di->events.usb_thermal_prot) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_OVV_PROTECT_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_OVV_PROTECT); + /* Intentional fallthrough */ + + case STATE_OVV_PROTECT: + if (!di->events.vbus_ovv && + !di->events.main_ovv && + !di->events.batt_ovv && + di->chg_info.usb_chg_ok && + di->chg_info.ac_chg_ok) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_CHG_NOT_OK_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_CHG_NOT_OK); + /* Intentional fallthrough */ + + case STATE_CHG_NOT_OK: + if (!di->events.mainextchnotok && + !di->events.usbchargernotok) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_SAFETY_TIMER_EXPIRED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED); + /* Intentional fallthrough */ + + case STATE_SAFETY_TIMER_EXPIRED: + /* We exit this state when charger is removed */ + break; + + case STATE_NORMAL_INIT: + abx500_chargalg_start_charging(di, + di->bat->bat_type[di->bat->batt_id].normal_vol_lvl, + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + abx500_chargalg_state_to(di, STATE_NORMAL); + abx500_chargalg_start_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + init_maxim_chg_curr(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + di->eoc_cnt = 0; + di->maintenance_chg = false; + power_supply_changed(&di->chargalg_psy); + + break; + + case STATE_NORMAL: + handle_maxim_chg_curr(di); + if (di->charge_status == POWER_SUPPLY_STATUS_FULL && + di->maintenance_chg) { + if (di->bat->no_maintenance) + abx500_chargalg_state_to(di, + STATE_WAIT_FOR_RECHARGE_INIT); + else + abx500_chargalg_state_to(di, + STATE_MAINTENANCE_A_INIT); + } + break; + + /* This state will be used when the maintenance state is disabled */ + case STATE_WAIT_FOR_RECHARGE_INIT: + abx500_chargalg_hold_charging(di); + abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE); + di->rch_cnt = RCH_COND_CNT; + /* Intentional fallthrough */ + + case STATE_WAIT_FOR_RECHARGE: + if (di->batt_data.volt <= + di->bat->bat_type[di->bat->batt_id].recharge_vol) { + if (di->rch_cnt-- == 0) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } else + di->rch_cnt = RCH_COND_CNT; + break; + + case STATE_MAINTENANCE_A_INIT: + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_start_maintenance_timer(di, + di->bat->bat_type[ + di->bat->batt_id].maint_a_chg_timer_h); + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].maint_a_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].maint_a_cur_lvl); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_A); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough*/ + + case STATE_MAINTENANCE_A: + if (di->events.maintenance_timer_expired) { + abx500_chargalg_stop_maintenance_timer(di); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT); + } + break; + + case STATE_MAINTENANCE_B_INIT: + abx500_chargalg_start_maintenance_timer(di, + di->bat->bat_type[ + di->bat->batt_id].maint_b_chg_timer_h); + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].maint_b_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].maint_b_cur_lvl); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_B); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough*/ + + case STATE_MAINTENANCE_B: + if (di->events.maintenance_timer_expired) { + abx500_chargalg_stop_maintenance_timer(di); + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } + break; + + case STATE_TEMP_LOWHIGH_INIT: + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].low_high_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].low_high_cur_lvl); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough */ + + case STATE_TEMP_LOWHIGH: + if (!di->events.btemp_lowhigh) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_WD_EXPIRED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_WD_EXPIRED); + /* Intentional fallthrough */ + + case STATE_WD_EXPIRED: + if (!di->events.ac_wd_expired && + !di->events.usb_wd_expired) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_TEMP_UNDEROVER_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_TEMP_UNDEROVER); + /* Intentional fallthrough */ + + case STATE_TEMP_UNDEROVER: + if (!di->events.btemp_underover) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + } + + /* Start charging directly if the new state is a charge state */ + if (di->charge_state == STATE_NORMAL_INIT || + di->charge_state == STATE_MAINTENANCE_A_INIT || + di->charge_state == STATE_MAINTENANCE_B_INIT) + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_periodic_work() - Periodic work for the algorithm + * @work: pointer to the work_struct structure + * + * Work queue function for the charging algorithm + */ +static void abx500_chargalg_periodic_work(struct work_struct *work) +{ + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_periodic_work.work); + + abx500_chargalg_algorithm(di); + + /* + * If a charger is connected then the battery has to be monitored + * frequently, else the work can be delayed. + */ + if (di->chg_info.conn_chg) + queue_delayed_work(di->chargalg_wq, + &di->chargalg_periodic_work, + di->bat->interval_charging * HZ); + else + queue_delayed_work(di->chargalg_wq, + &di->chargalg_periodic_work, + di->bat->interval_not_charging * HZ); +} + +/** + * abx500_chargalg_wd_work() - periodic work to kick the charger watchdog + * @work: pointer to the work_struct structure + * + * Work queue function for kicking the charger watchdog + */ +static void abx500_chargalg_wd_work(struct work_struct *work) +{ + int ret; + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_wd_work.work); + + dev_dbg(di->dev, "abx500_chargalg_wd_work\n"); + + ret = abx500_chargalg_kick_watchdog(di); + if (ret < 0) + dev_err(di->dev, "failed to kick watchdog\n"); + + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, CHG_WD_INTERVAL); +} + +/** + * abx500_chargalg_work() - Work to run the charging algorithm instantly + * @work: pointer to the work_struct structure + * + * Work queue function for calling the charging algorithm + */ +static void abx500_chargalg_work(struct work_struct *work) +{ + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_work); + + abx500_chargalg_algorithm(di); +} + +/** + * abx500_chargalg_get_property() - get the chargalg properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the + * chargalg properties by reading the sysfs files. + * status: charging/discharging/full/unknown + * health: health of the battery + * Returns error code in case of failure else 0 on success + */ +static int abx500_chargalg_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct abx500_chargalg *di; + + di = to_abx500_chargalg_device_info(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = di->charge_status; + break; + case POWER_SUPPLY_PROP_HEALTH: + if (di->events.batt_ovv) { + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + } else if (di->events.btemp_underover) { + if (di->batt_data.temp <= di->bat->temp_under) + val->intval = POWER_SUPPLY_HEALTH_COLD; + else + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + } else { + val->intval = POWER_SUPPLY_HEALTH_GOOD; + } + break; + default: + return -EINVAL; + } + return 0; +} + +/* Exposure to the sysfs interface */ + +/** + * abx500_chargalg_sysfs_charger() - sysfs store operations + * @kobj: pointer to the struct kobject + * @attr: pointer to the struct attribute + * @buf: buffer that holds the parameter passed from userspace + * @length: length of the parameter passed + * + * Returns length of the buffer(input taken from user space) on success + * else error code on failure + * The operation to be performed on passing the parameters from the user space. + */ +static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj, + struct attribute *attr, const char *buf, size_t length) +{ + struct abx500_chargalg *di = container_of(kobj, + struct abx500_chargalg, chargalg_kobject); + long int param; + int ac_usb; + int ret; + char entry = *attr->name; + + switch (entry) { + case 'c': + ret = strict_strtol(buf, 10, ¶m); + if (ret < 0) + return ret; + + ac_usb = param; + switch (ac_usb) { + case 0: + /* Disable charging */ + di->susp_status.ac_suspended = true; + di->susp_status.usb_suspended = true; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + case 1: + /* Enable AC Charging */ + di->susp_status.ac_suspended = false; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + case 2: + /* Enable USB charging */ + di->susp_status.usb_suspended = false; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + default: + dev_info(di->dev, "Wrong input\n" + "Enter 0. Disable AC/USB Charging\n" + "1. Enable AC charging\n" + "2. Enable USB Charging\n"); + }; + break; + }; + return strlen(buf); +} + +static struct attribute abx500_chargalg_en_charger = \ +{ + .name = "chargalg", + .mode = S_IWUGO, +}; + +static struct attribute *abx500_chargalg_chg[] = { + &abx500_chargalg_en_charger, + NULL +}; + +static const struct sysfs_ops abx500_chargalg_sysfs_ops = { + .store = abx500_chargalg_sysfs_charger, +}; + +static struct kobj_type abx500_chargalg_ktype = { + .sysfs_ops = &abx500_chargalg_sysfs_ops, + .default_attrs = abx500_chargalg_chg, +}; + +/** + * abx500_chargalg_sysfs_exit() - de-init of sysfs entry + * @di: pointer to the struct abx500_chargalg + * + * This function removes the entry in sysfs. + */ +static void abx500_chargalg_sysfs_exit(struct abx500_chargalg *di) +{ + kobject_del(&di->chargalg_kobject); +} + +/** + * abx500_chargalg_sysfs_init() - init of sysfs entry + * @di: pointer to the struct abx500_chargalg + * + * This function adds an entry in sysfs. + * Returns error code in case of failure else 0(on success) + */ +static int abx500_chargalg_sysfs_init(struct abx500_chargalg *di) +{ + int ret = 0; + + ret = kobject_init_and_add(&di->chargalg_kobject, + &abx500_chargalg_ktype, + NULL, "abx500_chargalg"); + if (ret < 0) + dev_err(di->dev, "failed to create sysfs entry\n"); + + return ret; +} +/* Exposure to the sysfs interface <<END>> */ + +#if defined(CONFIG_PM) +static int abx500_chargalg_resume(struct platform_device *pdev) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + /* Kick charger watchdog if charging (any charger online) */ + if (di->chg_info.online_chg) + queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0); + + /* + * Run the charging algorithm directly to be sure we don't + * do it too seldom + */ + queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); + + return 0; +} + +static int abx500_chargalg_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + if (di->chg_info.online_chg) + cancel_delayed_work_sync(&di->chargalg_wd_work); + + cancel_delayed_work_sync(&di->chargalg_periodic_work); + + return 0; +} +#else +#define abx500_chargalg_suspend NULL +#define abx500_chargalg_resume NULL +#endif + +static int __devexit abx500_chargalg_remove(struct platform_device *pdev) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + /* sysfs interface to enable/disbale charging from user space */ + abx500_chargalg_sysfs_exit(di); + + /* Delete the work queue */ + destroy_workqueue(di->chargalg_wq); + + flush_scheduled_work(); + power_supply_unregister(&di->chargalg_psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + + return 0; +} + +static int __devinit abx500_chargalg_probe(struct platform_device *pdev) +{ + struct abx500_bm_plat_data *plat_data; + int ret = 0; + + struct abx500_chargalg *di = + kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL); + if (!di) + return -ENOMEM; + + /* get device struct */ + di->dev = &pdev->dev; + + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->chargalg; + di->bat = plat_data->battery; + + /* chargalg supply */ + di->chargalg_psy.name = "abx500_chargalg"; + di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY; + di->chargalg_psy.properties = abx500_chargalg_props; + di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props); + di->chargalg_psy.get_property = abx500_chargalg_get_property; + di->chargalg_psy.supplied_to = di->pdata->supplied_to; + di->chargalg_psy.num_supplicants = di->pdata->num_supplicants; + di->chargalg_psy.external_power_changed = + abx500_chargalg_external_power_changed; + + /* Initilialize safety timer */ + init_timer(&di->safety_timer); + di->safety_timer.function = abx500_chargalg_safety_timer_expired; + di->safety_timer.data = (unsigned long) di; + + /* Initilialize maintenance timer */ + init_timer(&di->maintenance_timer); + di->maintenance_timer.function = + abx500_chargalg_maintenance_timer_expired; + di->maintenance_timer.data = (unsigned long) di; + + /* Create a work queue for the chargalg */ + di->chargalg_wq = + create_singlethread_workqueue("abx500_chargalg_wq"); + if (di->chargalg_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for chargalg */ + INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_periodic_work, + abx500_chargalg_periodic_work); + INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_wd_work, + abx500_chargalg_wd_work); + + /* Init work for chargalg */ + INIT_WORK(&di->chargalg_work, abx500_chargalg_work); + + /* To detect charger at startup */ + di->chg_info.prev_conn_chg = -1; + + /* Register chargalg power supply class */ + ret = power_supply_register(di->dev, &di->chargalg_psy); + if (ret) { + dev_err(di->dev, "failed to register chargalg psy\n"); + goto free_chargalg_wq; + } + + platform_set_drvdata(pdev, di); + + /* sysfs interface to enable/disable charging from user space */ + ret = abx500_chargalg_sysfs_init(di); + if (ret) { + dev_err(di->dev, "failed to create sysfs entry\n"); + goto free_psy; + } + + /* Run the charging algorithm */ + queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); + + dev_info(di->dev, "probe success\n"); + return ret; + +free_psy: + power_supply_unregister(&di->chargalg_psy); +free_chargalg_wq: + destroy_workqueue(di->chargalg_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver abx500_chargalg_driver = { + .probe = abx500_chargalg_probe, + .remove = __devexit_p(abx500_chargalg_remove), + .suspend = abx500_chargalg_suspend, + .resume = abx500_chargalg_resume, + .driver = { + .name = "abx500-chargalg", + .owner = THIS_MODULE, + }, +}; + +static int __init abx500_chargalg_init(void) +{ + return platform_driver_register(&abx500_chargalg_driver); +} + +static void __exit abx500_chargalg_exit(void) +{ + platform_driver_unregister(&abx500_chargalg_driver); +} + +module_init(abx500_chargalg_init); +module_exit(abx500_chargalg_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski"); +MODULE_ALIAS("platform:abx500-chargalg"); +MODULE_DESCRIPTION("abx500 battery charging algorithm"); diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c index 88fd971..9eca9f1 100644 --- a/drivers/power/charger-manager.c +++ b/drivers/power/charger-manager.c @@ -134,12 +134,11 @@ static int get_batt_uV(struct charger_manager *cm, int *uV) union power_supply_propval val; int ret; - if (cm->fuel_gauge) - ret = cm->fuel_gauge->get_property(cm->fuel_gauge, - POWER_SUPPLY_PROP_VOLTAGE_NOW, &val); - else + if (!cm->fuel_gauge) return -ENODEV; + ret = cm->fuel_gauge->get_property(cm->fuel_gauge, + POWER_SUPPLY_PROP_VOLTAGE_NOW, &val); if (ret) return ret; @@ -245,9 +244,7 @@ static int try_charger_enable(struct charger_manager *cm, bool enable) struct charger_desc *desc = cm->desc; /* Ignore if it's redundent command */ - if (enable && cm->charger_enabled) - return 0; - if (!enable && !cm->charger_enabled) + if (enable == cm->charger_enabled) return 0; if (enable) { @@ -309,9 +306,7 @@ static void uevent_notify(struct charger_manager *cm, const char *event) if (!strncmp(env_str_save, event, UEVENT_BUF_SIZE)) return; /* Duplicated. */ - else - strncpy(env_str_save, event, UEVENT_BUF_SIZE); - + strncpy(env_str_save, event, UEVENT_BUF_SIZE); return; } @@ -387,8 +382,10 @@ static bool cm_monitor(void) mutex_lock(&cm_list_mtx); - list_for_each_entry(cm, &cm_list, entry) - stop = stop || _cm_monitor(cm); + list_for_each_entry(cm, &cm_list, entry) { + if (_cm_monitor(cm)) + stop = true; + } mutex_unlock(&cm_list_mtx); @@ -402,7 +399,8 @@ static int charger_get_property(struct power_supply *psy, struct charger_manager *cm = container_of(psy, struct charger_manager, charger_psy); struct charger_desc *desc = cm->desc; - int i, ret = 0, uV; + int ret = 0; + int uV; switch (psp) { case POWER_SUPPLY_PROP_STATUS: @@ -428,8 +426,7 @@ static int charger_get_property(struct power_supply *psy, val->intval = 0; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: - ret = get_batt_uV(cm, &i); - val->intval = i; + ret = get_batt_uV(cm, &val->intval); break; case POWER_SUPPLY_PROP_CURRENT_NOW: ret = cm->fuel_gauge->get_property(cm->fuel_gauge, @@ -697,8 +694,10 @@ bool cm_suspend_again(void) mutex_lock(&cm_list_mtx); list_for_each_entry(cm, &cm_list, entry) { if (cm->status_save_ext_pwr_inserted != is_ext_pwr_online(cm) || - cm->status_save_batt != is_batt_present(cm)) + cm->status_save_batt != is_batt_present(cm)) { ret = false; + break; + } } mutex_unlock(&cm_list_mtx); @@ -855,11 +854,10 @@ static int charger_manager_probe(struct platform_device *pdev) platform_set_drvdata(pdev, cm); - memcpy(&cm->charger_psy, &psy_default, - sizeof(psy_default)); + memcpy(&cm->charger_psy, &psy_default, sizeof(psy_default)); + if (!desc->psy_name) { - strncpy(cm->psy_name_buf, psy_default.name, - PSY_NAME_MAX); + strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX); } else { strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX); } @@ -894,15 +892,15 @@ static int charger_manager_probe(struct platform_device *pdev) POWER_SUPPLY_PROP_CURRENT_NOW; cm->charger_psy.num_properties++; } - if (!desc->measure_battery_temp) { - cm->charger_psy.properties[cm->charger_psy.num_properties] = - POWER_SUPPLY_PROP_TEMP_AMBIENT; - cm->charger_psy.num_properties++; - } + if (desc->measure_battery_temp) { cm->charger_psy.properties[cm->charger_psy.num_properties] = POWER_SUPPLY_PROP_TEMP; cm->charger_psy.num_properties++; + } else { + cm->charger_psy.properties[cm->charger_psy.num_properties] = + POWER_SUPPLY_PROP_TEMP_AMBIENT; + cm->charger_psy.num_properties++; } ret = power_supply_register(NULL, &cm->charger_psy); @@ -933,9 +931,8 @@ static int charger_manager_probe(struct platform_device *pdev) return 0; err_chg_enable: - if (desc->charger_regulators) - regulator_bulk_free(desc->num_charger_regulators, - desc->charger_regulators); + regulator_bulk_free(desc->num_charger_regulators, + desc->charger_regulators); err_bulk_get: power_supply_unregister(&cm->charger_psy); err_register: @@ -961,10 +958,8 @@ static int __devexit charger_manager_remove(struct platform_device *pdev) list_del(&cm->entry); mutex_unlock(&cm_list_mtx); - if (desc->charger_regulators) - regulator_bulk_free(desc->num_charger_regulators, - desc->charger_regulators); - + regulator_bulk_free(desc->num_charger_regulators, + desc->charger_regulators); power_supply_unregister(&cm->charger_psy); kfree(cm->charger_psy.properties); kfree(cm->charger_stat); @@ -982,9 +977,7 @@ MODULE_DEVICE_TABLE(platform, charger_manager_id); static int cm_suspend_prepare(struct device *dev) { - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct charger_manager *cm = platform_get_drvdata(pdev); + struct charger_manager *cm = dev_get_drvdata(dev); if (!cm_suspended) { if (rtc_dev) { @@ -1020,9 +1013,7 @@ static int cm_suspend_prepare(struct device *dev) static void cm_suspend_complete(struct device *dev) { - struct platform_device *pdev = container_of(dev, struct platform_device, - dev); - struct charger_manager *cm = platform_get_drvdata(pdev); + struct charger_manager *cm = dev_get_drvdata(dev); if (cm_suspended) { if (rtc_dev) { diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c index e8ea47a..a5f6a0e 100644 --- a/drivers/power/da9052-battery.c +++ b/drivers/power/da9052-battery.c @@ -612,6 +612,7 @@ static s32 __devinit da9052_bat_probe(struct platform_device *pdev) if (ret) goto err; + platform_set_drvdata(pdev, bat); return 0; err: @@ -633,6 +634,7 @@ static int __devexit da9052_bat_remove(struct platform_device *pdev) free_irq(bat->da9052->irq_base + irq, bat); } power_supply_unregister(&bat->psy); + kfree(bat); return 0; } @@ -645,18 +647,7 @@ static struct platform_driver da9052_bat_driver = { .owner = THIS_MODULE, }, }; - -static int __init da9052_bat_init(void) -{ - return platform_driver_register(&da9052_bat_driver); -} -module_init(da9052_bat_init); - -static void __exit da9052_bat_exit(void) -{ - platform_driver_unregister(&da9052_bat_driver); -} -module_exit(da9052_bat_exit); +module_platform_driver(da9052_bat_driver); MODULE_DESCRIPTION("DA9052 BAT Device Driver"); MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c index bfbce5d..6bb6e2f 100644 --- a/drivers/power/ds2782_battery.c +++ b/drivers/power/ds2782_battery.c @@ -403,18 +403,7 @@ static struct i2c_driver ds278x_battery_driver = { .remove = ds278x_battery_remove, .id_table = ds278x_id, }; - -static int __init ds278x_init(void) -{ - return i2c_add_driver(&ds278x_battery_driver); -} -module_init(ds278x_init); - -static void __exit ds278x_exit(void) -{ - i2c_del_driver(&ds278x_battery_driver); -} -module_exit(ds278x_exit); +module_i2c_driver(ds278x_battery_driver); MODULE_AUTHOR("Ryan Mallon"); MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 1289a5f..39eb50f 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -480,6 +480,7 @@ fail0: dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret); + isp1704_charger_set_power(isp, 0); return ret; } diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c index c53dd12..d8b7578 100644 --- a/drivers/power/lp8727_charger.c +++ b/drivers/power/lp8727_charger.c @@ -1,6 +1,7 @@ /* - * Driver for LP8727 Micro/Mini USB IC with intergrated charger + * Driver for LP8727 Micro/Mini USB IC with integrated charger * + * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor * * This program is free software; you can redistribute it and/or modify @@ -25,7 +26,7 @@ #define INT1 0x4 #define INT2 0x5 #define STATUS1 0x6 -#define STATUS2 0x7 +#define STATUS2 0x7 #define CHGCTRL2 0x9 /* CTRL1 register */ @@ -91,7 +92,7 @@ struct lp8727_chg { enum lp8727_dev_id devid; }; -static int lp8727_i2c_read(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) +static int lp8727_read_bytes(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) { s32 ret; @@ -102,29 +103,22 @@ static int lp8727_i2c_read(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) return (ret != len) ? -EIO : 0; } -static int lp8727_i2c_write(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len) +static inline int lp8727_read_byte(struct lp8727_chg *pchg, u8 reg, u8 *data) { - s32 ret; + return lp8727_read_bytes(pchg, reg, data, 1); +} + +static int lp8727_write_byte(struct lp8727_chg *pchg, u8 reg, u8 data) +{ + int ret; mutex_lock(&pchg->xfer_lock); - ret = i2c_smbus_write_i2c_block_data(pchg->client, reg, len, data); + ret = i2c_smbus_write_byte_data(pchg->client, reg, data); mutex_unlock(&pchg->xfer_lock); return ret; } -static inline int lp8727_i2c_read_byte(struct lp8727_chg *pchg, u8 reg, - u8 *data) -{ - return lp8727_i2c_read(pchg, reg, data, 1); -} - -static inline int lp8727_i2c_write_byte(struct lp8727_chg *pchg, u8 reg, - u8 *data) -{ - return lp8727_i2c_write(pchg, reg, data, 1); -} - static int lp8727_is_charger_attached(const char *name, int id) { if (name) { @@ -137,37 +131,41 @@ static int lp8727_is_charger_attached(const char *name, int id) return (id >= ID_TA && id <= ID_USB_CHG) ? 1 : 0; } -static void lp8727_init_device(struct lp8727_chg *pchg) +static int lp8727_init_device(struct lp8727_chg *pchg) { u8 val; + int ret; val = ID200_EN | ADC_EN | CP_EN; - if (lp8727_i2c_write_byte(pchg, CTRL1, &val)) - dev_err(pchg->dev, "i2c write err : addr=0x%.2x\n", CTRL1); + ret = lp8727_write_byte(pchg, CTRL1, val); + if (ret) + return ret; val = INT_EN | CHGDET_EN; - if (lp8727_i2c_write_byte(pchg, CTRL2, &val)) - dev_err(pchg->dev, "i2c write err : addr=0x%.2x\n", CTRL2); + ret = lp8727_write_byte(pchg, CTRL2, val); + if (ret) + return ret; + + return 0; } static int lp8727_is_dedicated_charger(struct lp8727_chg *pchg) { u8 val; - lp8727_i2c_read_byte(pchg, STATUS1, &val); - return (val & DCPORT); + lp8727_read_byte(pchg, STATUS1, &val); + return val & DCPORT; } static int lp8727_is_usb_charger(struct lp8727_chg *pchg) { u8 val; - lp8727_i2c_read_byte(pchg, STATUS1, &val); - return (val & CHPORT); + lp8727_read_byte(pchg, STATUS1, &val); + return val & CHPORT; } static void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw) { - u8 val = sw; - lp8727_i2c_write_byte(pchg, SWCTRL, &val); + lp8727_write_byte(pchg, SWCTRL, sw); } static void lp8727_id_detection(struct lp8727_chg *pchg, u8 id, int vbusin) @@ -207,9 +205,9 @@ static void lp8727_enable_chgdet(struct lp8727_chg *pchg) { u8 val; - lp8727_i2c_read_byte(pchg, CTRL2, &val); + lp8727_read_byte(pchg, CTRL2, &val); val |= CHGDET_EN; - lp8727_i2c_write_byte(pchg, CTRL2, &val); + lp8727_write_byte(pchg, CTRL2, val); } static void lp8727_delayed_func(struct work_struct *_work) @@ -218,7 +216,7 @@ static void lp8727_delayed_func(struct work_struct *_work) struct lp8727_chg *pchg = container_of(_work, struct lp8727_chg, work.work); - if (lp8727_i2c_read(pchg, INT1, intstat, 2)) { + if (lp8727_read_bytes(pchg, INT1, intstat, 2)) { dev_err(pchg->dev, "can not read INT registers\n"); return; } @@ -244,20 +242,22 @@ static irqreturn_t lp8727_isr_func(int irq, void *ptr) return IRQ_HANDLED; } -static void lp8727_intr_config(struct lp8727_chg *pchg) +static int lp8727_intr_config(struct lp8727_chg *pchg) { INIT_DELAYED_WORK(&pchg->work, lp8727_delayed_func); pchg->irqthread = create_singlethread_workqueue("lp8727-irqthd"); - if (!pchg->irqthread) + if (!pchg->irqthread) { dev_err(pchg->dev, "can not create thread for lp8727\n"); - - if (request_threaded_irq(pchg->client->irq, - NULL, - lp8727_isr_func, - IRQF_TRIGGER_FALLING, "lp8727_irq", pchg)) { - dev_err(pchg->dev, "lp8727 irq can not be registered\n"); + return -ENOMEM; } + + return request_threaded_irq(pchg->client->irq, + NULL, + lp8727_isr_func, + IRQF_TRIGGER_FALLING, + "lp8727_irq", + pchg); } static enum power_supply_property lp8727_charger_prop[] = { @@ -300,7 +300,7 @@ static int lp8727_battery_get_property(struct power_supply *psy, switch (psp) { case POWER_SUPPLY_PROP_STATUS: if (lp8727_is_charger_attached(psy->name, pchg->devid)) { - lp8727_i2c_read_byte(pchg, STATUS1, &read); + lp8727_read_byte(pchg, STATUS1, &read); if (((read & CHGSTAT) >> 4) == EOC) val->intval = POWER_SUPPLY_STATUS_FULL; else @@ -310,7 +310,7 @@ static int lp8727_battery_get_property(struct power_supply *psy, } break; case POWER_SUPPLY_PROP_HEALTH: - lp8727_i2c_read_byte(pchg, STATUS2, &read); + lp8727_read_byte(pchg, STATUS2, &read); read = (read & TEMP_STAT) >> 5; if (read >= 0x1 && read <= 0x3) val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; @@ -351,7 +351,7 @@ static void lp8727_charger_changed(struct power_supply *psy) eoc_level = pchg->chg_parm->eoc_level; ichg = pchg->chg_parm->ichg; val = (ichg << 4) | eoc_level; - lp8727_i2c_write_byte(pchg, CHGCTRL2, &val); + lp8727_write_byte(pchg, CHGCTRL2, val); } } } @@ -439,15 +439,29 @@ static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id) mutex_init(&pchg->xfer_lock); - lp8727_init_device(pchg); - lp8727_intr_config(pchg); + ret = lp8727_init_device(pchg); + if (ret) { + dev_err(pchg->dev, "i2c communication err: %d", ret); + goto error; + } + + ret = lp8727_intr_config(pchg); + if (ret) { + dev_err(pchg->dev, "irq handler err: %d", ret); + goto error; + } ret = lp8727_register_psy(pchg); - if (ret) - dev_err(pchg->dev, - "can not register power supplies. err=%d", ret); + if (ret) { + dev_err(pchg->dev, "power supplies register err: %d", ret); + goto error; + } return 0; + +error: + kfree(pchg); + return ret; } static int __devexit lp8727_remove(struct i2c_client *cl) @@ -466,6 +480,7 @@ static const struct i2c_device_id lp8727_ids[] = { {"lp8727", 0}, { } }; +MODULE_DEVICE_TABLE(i2c, lp8727_ids); static struct i2c_driver lp8727_driver = { .driver = { @@ -475,21 +490,9 @@ static struct i2c_driver lp8727_driver = { .remove = __devexit_p(lp8727_remove), .id_table = lp8727_ids, }; +module_i2c_driver(lp8727_driver); -static int __init lp8727_init(void) -{ - return i2c_add_driver(&lp8727_driver); -} - -static void __exit lp8727_exit(void) -{ - i2c_del_driver(&lp8727_driver); -} - -module_init(lp8727_init); -module_exit(lp8727_exit); - -MODULE_DESCRIPTION("National Semiconductor LP8727 charger driver"); -MODULE_AUTHOR - ("Woogyom Kim <milo.kim@ti.com>, Daniel Jeong <daniel.jeong@ti.com>"); +MODULE_DESCRIPTION("TI/National Semiconductor LP8727 charger driver"); +MODULE_AUTHOR("Woogyom Kim <milo.kim@ti.com>, " + "Daniel Jeong <daniel.jeong@ti.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c index 2f2f9a6..c284143 100644 --- a/drivers/power/max17040_battery.c +++ b/drivers/power/max17040_battery.c @@ -290,18 +290,7 @@ static struct i2c_driver max17040_i2c_driver = { .resume = max17040_resume, .id_table = max17040_id, }; - -static int __init max17040_init(void) -{ - return i2c_add_driver(&max17040_i2c_driver); -} -module_init(max17040_init); - -static void __exit max17040_exit(void) -{ - i2c_del_driver(&max17040_i2c_driver); -} -module_exit(max17040_exit); +module_i2c_driver(max17040_i2c_driver); MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>"); MODULE_DESCRIPTION("MAX17040 Fuel Gauge"); diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c index 86acee2..04620c2 100644 --- a/drivers/power/max17042_battery.c +++ b/drivers/power/max17042_battery.c @@ -26,14 +26,47 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/interrupt.h> #include <linux/mod_devicetable.h> #include <linux/power_supply.h> #include <linux/power/max17042_battery.h> +#include <linux/of.h> + +/* Status register bits */ +#define STATUS_POR_BIT (1 << 1) +#define STATUS_BST_BIT (1 << 3) +#define STATUS_VMN_BIT (1 << 8) +#define STATUS_TMN_BIT (1 << 9) +#define STATUS_SMN_BIT (1 << 10) +#define STATUS_BI_BIT (1 << 11) +#define STATUS_VMX_BIT (1 << 12) +#define STATUS_TMX_BIT (1 << 13) +#define STATUS_SMX_BIT (1 << 14) +#define STATUS_BR_BIT (1 << 15) + +/* Interrupt mask bits */ +#define CONFIG_ALRT_BIT_ENBL (1 << 2) +#define STATUS_INTR_SOCMIN_BIT (1 << 10) +#define STATUS_INTR_SOCMAX_BIT (1 << 14) + +#define VFSOC0_LOCK 0x0000 +#define VFSOC0_UNLOCK 0x0080 +#define MODEL_UNLOCK1 0X0059 +#define MODEL_UNLOCK2 0X00C4 +#define MODEL_LOCK1 0X0000 +#define MODEL_LOCK2 0X0000 + +#define dQ_ACC_DIV 0x4 +#define dP_ACC_100 0x1900 +#define dP_ACC_200 0x3200 struct max17042_chip { struct i2c_client *client; struct power_supply battery; struct max17042_platform_data *pdata; + struct work_struct work; + int init_complete; }; static int max17042_write_reg(struct i2c_client *client, u8 reg, u16 value) @@ -87,6 +120,9 @@ static int max17042_get_property(struct power_supply *psy, struct max17042_chip, battery); int ret; + if (!chip->init_complete) + return -EAGAIN; + switch (psp) { case POWER_SUPPLY_PROP_PRESENT: ret = max17042_read_reg(chip->client, MAX17042_STATUS); @@ -136,21 +172,18 @@ static int max17042_get_property(struct power_supply *psy, val->intval = ret * 625 / 8; break; case POWER_SUPPLY_PROP_CAPACITY: - ret = max17042_read_reg(chip->client, MAX17042_SOC); + ret = max17042_read_reg(chip->client, MAX17042_RepSOC); if (ret < 0) return ret; val->intval = ret >> 8; break; case POWER_SUPPLY_PROP_CHARGE_FULL: - ret = max17042_read_reg(chip->client, MAX17042_RepSOC); + ret = max17042_read_reg(chip->client, MAX17042_FullCAP); if (ret < 0) return ret; - if ((ret >> 8) >= MAX17042_BATTERY_FULL) - val->intval = 1; - else if (ret >= 0) - val->intval = 0; + val->intval = ret * 1000 / 2; break; case POWER_SUPPLY_PROP_TEMP: ret = max17042_read_reg(chip->client, MAX17042_TEMP); @@ -210,22 +243,419 @@ static int max17042_get_property(struct power_supply *psy, return 0; } +static int max17042_write_verify_reg(struct i2c_client *client, + u8 reg, u16 value) +{ + int retries = 8; + int ret; + u16 read_value; + + do { + ret = i2c_smbus_write_word_data(client, reg, value); + read_value = max17042_read_reg(client, reg); + if (read_value != value) { + ret = -EIO; + retries--; + } + } while (retries && read_value != value); + + if (ret < 0) + dev_err(&client->dev, "%s: err %d\n", __func__, ret); + + return ret; +} + +static inline void max17042_override_por( + struct i2c_client *client, u8 reg, u16 value) +{ + if (value) + max17042_write_reg(client, reg, value); +} + +static inline void max10742_unlock_model(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + max17042_write_reg(client, MAX17042_MLOCKReg1, MODEL_UNLOCK1); + max17042_write_reg(client, MAX17042_MLOCKReg2, MODEL_UNLOCK2); +} + +static inline void max10742_lock_model(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + max17042_write_reg(client, MAX17042_MLOCKReg1, MODEL_LOCK1); + max17042_write_reg(client, MAX17042_MLOCKReg2, MODEL_LOCK2); +} + +static inline void max17042_write_model_data(struct max17042_chip *chip, + u8 addr, int size) +{ + struct i2c_client *client = chip->client; + int i; + for (i = 0; i < size; i++) + max17042_write_reg(client, addr + i, + chip->pdata->config_data->cell_char_tbl[i]); +} + +static inline void max17042_read_model_data(struct max17042_chip *chip, + u8 addr, u16 *data, int size) +{ + struct i2c_client *client = chip->client; + int i; + + for (i = 0; i < size; i++) + data[i] = max17042_read_reg(client, addr + i); +} + +static inline int max17042_model_data_compare(struct max17042_chip *chip, + u16 *data1, u16 *data2, int size) +{ + int i; + + if (memcmp(data1, data2, size)) { + dev_err(&chip->client->dev, "%s compare failed\n", __func__); + for (i = 0; i < size; i++) + dev_info(&chip->client->dev, "0x%x, 0x%x", + data1[i], data2[i]); + dev_info(&chip->client->dev, "\n"); + return -EINVAL; + } + return 0; +} + +static int max17042_init_model(struct max17042_chip *chip) +{ + int ret; + int table_size = + sizeof(chip->pdata->config_data->cell_char_tbl)/sizeof(u16); + u16 *temp_data; + + temp_data = kzalloc(table_size, GFP_KERNEL); + if (!temp_data) + return -ENOMEM; + + max10742_unlock_model(chip); + max17042_write_model_data(chip, MAX17042_MODELChrTbl, + table_size); + max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data, + table_size); + + ret = max17042_model_data_compare( + chip, + chip->pdata->config_data->cell_char_tbl, + temp_data, + table_size); + + max10742_lock_model(chip); + kfree(temp_data); + + return ret; +} + +static int max17042_verify_model_lock(struct max17042_chip *chip) +{ + int i; + int table_size = + sizeof(chip->pdata->config_data->cell_char_tbl); + u16 *temp_data; + int ret = 0; + + temp_data = kzalloc(table_size, GFP_KERNEL); + if (!temp_data) + return -ENOMEM; + + max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data, + table_size); + for (i = 0; i < table_size; i++) + if (temp_data[i]) + ret = -EINVAL; + + kfree(temp_data); + return ret; +} + +static void max17042_write_config_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_reg(chip->client, MAX17042_CONFIG, config->config); + max17042_write_reg(chip->client, MAX17042_LearnCFG, config->learn_cfg); + max17042_write_reg(chip->client, MAX17042_FilterCFG, + config->filter_cfg); + max17042_write_reg(chip->client, MAX17042_RelaxCFG, config->relax_cfg); +} + +static void max17042_write_custom_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_verify_reg(chip->client, MAX17042_RCOMP0, + config->rcomp0); + max17042_write_verify_reg(chip->client, MAX17042_TempCo, + config->tcompc0); + max17042_write_reg(chip->client, MAX17042_EmptyTempCo, + config->empty_tempco); + max17042_write_verify_reg(chip->client, MAX17042_K_empty0, + config->kempty0); + max17042_write_verify_reg(chip->client, MAX17042_ICHGTerm, + config->ichgt_term); +} + +static void max17042_update_capacity_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_verify_reg(chip->client, MAX17042_FullCAP, + config->fullcap); + max17042_write_reg(chip->client, MAX17042_DesignCap, + config->design_cap); + max17042_write_verify_reg(chip->client, MAX17042_FullCAPNom, + config->fullcapnom); +} + +static void max17042_reset_vfsoc0_reg(struct max17042_chip *chip) +{ + u16 vfSoc; + + vfSoc = max17042_read_reg(chip->client, MAX17042_VFSOC); + max17042_write_reg(chip->client, MAX17042_VFSOC0Enable, VFSOC0_UNLOCK); + max17042_write_verify_reg(chip->client, MAX17042_VFSOC0, vfSoc); + max17042_write_reg(chip->client, MAX17042_VFSOC0Enable, VFSOC0_LOCK); +} + +static void max17042_load_new_capacity_params(struct max17042_chip *chip) +{ + u16 full_cap0, rep_cap, dq_acc, vfSoc; + u32 rem_cap; + + struct max17042_config_data *config = chip->pdata->config_data; + + full_cap0 = max17042_read_reg(chip->client, MAX17042_FullCAP0); + vfSoc = max17042_read_reg(chip->client, MAX17042_VFSOC); + + /* fg_vfSoc needs to shifted by 8 bits to get the + * perc in 1% accuracy, to get the right rem_cap multiply + * full_cap0, fg_vfSoc and devide by 100 + */ + rem_cap = ((vfSoc >> 8) * full_cap0) / 100; + max17042_write_verify_reg(chip->client, MAX17042_RemCap, (u16)rem_cap); + + rep_cap = (u16)rem_cap; + max17042_write_verify_reg(chip->client, MAX17042_RepCap, rep_cap); + + /* Write dQ_acc to 200% of Capacity and dP_acc to 200% */ + dq_acc = config->fullcap / dQ_ACC_DIV; + max17042_write_verify_reg(chip->client, MAX17042_dQacc, dq_acc); + max17042_write_verify_reg(chip->client, MAX17042_dPacc, dP_ACC_200); + + max17042_write_verify_reg(chip->client, MAX17042_FullCAP, + config->fullcap); + max17042_write_reg(chip->client, MAX17042_DesignCap, + config->design_cap); + max17042_write_verify_reg(chip->client, MAX17042_FullCAPNom, + config->fullcapnom); +} + +/* + * Block write all the override values coming from platform data. + * This function MUST be called before the POR initialization proceedure + * specified by maxim. + */ +static inline void max17042_override_por_values(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_override_por(client, MAX17042_TGAIN, config->tgain); + max17042_override_por(client, MAx17042_TOFF, config->toff); + max17042_override_por(client, MAX17042_CGAIN, config->cgain); + max17042_override_por(client, MAX17042_COFF, config->coff); + + max17042_override_por(client, MAX17042_VALRT_Th, config->valrt_thresh); + max17042_override_por(client, MAX17042_TALRT_Th, config->talrt_thresh); + max17042_override_por(client, MAX17042_SALRT_Th, + config->soc_alrt_thresh); + max17042_override_por(client, MAX17042_CONFIG, config->config); + max17042_override_por(client, MAX17042_SHDNTIMER, config->shdntimer); + + max17042_override_por(client, MAX17042_DesignCap, config->design_cap); + max17042_override_por(client, MAX17042_ICHGTerm, config->ichgt_term); + + max17042_override_por(client, MAX17042_AtRate, config->at_rate); + max17042_override_por(client, MAX17042_LearnCFG, config->learn_cfg); + max17042_override_por(client, MAX17042_FilterCFG, config->filter_cfg); + max17042_override_por(client, MAX17042_RelaxCFG, config->relax_cfg); + max17042_override_por(client, MAX17042_MiscCFG, config->misc_cfg); + max17042_override_por(client, MAX17042_MaskSOC, config->masksoc); + + max17042_override_por(client, MAX17042_FullCAP, config->fullcap); + max17042_override_por(client, MAX17042_FullCAPNom, config->fullcapnom); + max17042_override_por(client, MAX17042_SOC_empty, config->socempty); + max17042_override_por(client, MAX17042_LAvg_empty, config->lavg_empty); + max17042_override_por(client, MAX17042_dQacc, config->dqacc); + max17042_override_por(client, MAX17042_dPacc, config->dpacc); + + max17042_override_por(client, MAX17042_V_empty, config->vempty); + max17042_override_por(client, MAX17042_TempNom, config->temp_nom); + max17042_override_por(client, MAX17042_TempLim, config->temp_lim); + max17042_override_por(client, MAX17042_FCTC, config->fctc); + max17042_override_por(client, MAX17042_RCOMP0, config->rcomp0); + max17042_override_por(client, MAX17042_TempCo, config->tcompc0); + max17042_override_por(client, MAX17042_EmptyTempCo, + config->empty_tempco); + max17042_override_por(client, MAX17042_K_empty0, config->kempty0); +} + +static int max17042_init_chip(struct max17042_chip *chip) +{ + int ret; + int val; + + max17042_override_por_values(chip); + /* After Power up, the MAX17042 requires 500mS in order + * to perform signal debouncing and initial SOC reporting + */ + msleep(500); + + /* Initialize configaration */ + max17042_write_config_regs(chip); + + /* write cell characterization data */ + ret = max17042_init_model(chip); + if (ret) { + dev_err(&chip->client->dev, "%s init failed\n", + __func__); + return -EIO; + } + max17042_verify_model_lock(chip); + if (ret) { + dev_err(&chip->client->dev, "%s lock verify failed\n", + __func__); + return -EIO; + } + /* write custom parameters */ + max17042_write_custom_regs(chip); + + /* update capacity params */ + max17042_update_capacity_regs(chip); + + /* delay must be atleast 350mS to allow VFSOC + * to be calculated from the new configuration + */ + msleep(350); + + /* reset vfsoc0 reg */ + max17042_reset_vfsoc0_reg(chip); + + /* load new capacity params */ + max17042_load_new_capacity_params(chip); + + /* Init complete, Clear the POR bit */ + val = max17042_read_reg(chip->client, MAX17042_STATUS); + max17042_write_reg(chip->client, MAX17042_STATUS, + val & (~STATUS_POR_BIT)); + return 0; +} + +static void max17042_set_soc_threshold(struct max17042_chip *chip, u16 off) +{ + u16 soc, soc_tr; + + /* program interrupt thesholds such that we should + * get interrupt for every 'off' perc change in the soc + */ + soc = max17042_read_reg(chip->client, MAX17042_RepSOC) >> 8; + soc_tr = (soc + off) << 8; + soc_tr |= (soc - off); + max17042_write_reg(chip->client, MAX17042_SALRT_Th, soc_tr); +} + +static irqreturn_t max17042_thread_handler(int id, void *dev) +{ + struct max17042_chip *chip = dev; + u16 val; + + val = max17042_read_reg(chip->client, MAX17042_STATUS); + if ((val & STATUS_INTR_SOCMIN_BIT) || + (val & STATUS_INTR_SOCMAX_BIT)) { + dev_info(&chip->client->dev, "SOC threshold INTR\n"); + max17042_set_soc_threshold(chip, 1); + } + + power_supply_changed(&chip->battery); + return IRQ_HANDLED; +} + +static void max17042_init_worker(struct work_struct *work) +{ + struct max17042_chip *chip = container_of(work, + struct max17042_chip, work); + int ret; + + /* Initialize registers according to values from the platform data */ + if (chip->pdata->enable_por_init && chip->pdata->config_data) { + ret = max17042_init_chip(chip); + if (ret) + return; + } + + chip->init_complete = 1; +} + +#ifdef CONFIG_OF +static struct max17042_platform_data * +max17042_get_pdata(struct device *dev) +{ + struct device_node *np = dev->of_node; + u32 prop; + struct max17042_platform_data *pdata; + + if (!np) + return dev->platform_data; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + /* + * Require current sense resistor value to be specified for + * current-sense functionality to be enabled at all. + */ + if (of_property_read_u32(np, "maxim,rsns-microohm", &prop) == 0) { + pdata->r_sns = prop; + pdata->enable_current_sense = true; + } + + return pdata; +} +#else +static struct max17042_platform_data * +max17042_get_pdata(struct device *dev) +{ + return dev->platform_data; +} +#endif + static int __devinit max17042_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct max17042_chip *chip; int ret; + int reg; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EIO; - chip = kzalloc(sizeof(*chip), GFP_KERNEL); + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; chip->client = client; - chip->pdata = client->dev.platform_data; + chip->pdata = max17042_get_pdata(&client->dev); + if (!chip->pdata) { + dev_err(&client->dev, "no platform data provided\n"); + return -EINVAL; + } i2c_set_clientdata(client, chip); @@ -243,17 +673,9 @@ static int __devinit max17042_probe(struct i2c_client *client, if (chip->pdata->r_sns == 0) chip->pdata->r_sns = MAX17042_DEFAULT_SNS_RESISTOR; - ret = power_supply_register(&client->dev, &chip->battery); - if (ret) { - dev_err(&client->dev, "failed: power supply register\n"); - kfree(chip); - return ret; - } - - /* Initialize registers according to values from the platform data */ if (chip->pdata->init_data) max17042_set_reg(client, chip->pdata->init_data, - chip->pdata->num_init_data); + chip->pdata->num_init_data); if (!chip->pdata->enable_current_sense) { max17042_write_reg(client, MAX17042_CGAIN, 0x0000); @@ -261,7 +683,34 @@ static int __devinit max17042_probe(struct i2c_client *client, max17042_write_reg(client, MAX17042_LearnCFG, 0x0007); } - return 0; + if (client->irq) { + ret = request_threaded_irq(client->irq, NULL, + max17042_thread_handler, + IRQF_TRIGGER_FALLING, + chip->battery.name, chip); + if (!ret) { + reg = max17042_read_reg(client, MAX17042_CONFIG); + reg |= CONFIG_ALRT_BIT_ENBL; + max17042_write_reg(client, MAX17042_CONFIG, reg); + max17042_set_soc_threshold(chip, 1); + } else + dev_err(&client->dev, "%s(): cannot get IRQ\n", + __func__); + } + + reg = max17042_read_reg(chip->client, MAX17042_STATUS); + + if (reg & STATUS_POR_BIT) { + INIT_WORK(&chip->work, max17042_init_worker); + schedule_work(&chip->work); + } else { + chip->init_complete = 1; + } + + ret = power_supply_register(&client->dev, &chip->battery); + if (ret) + dev_err(&client->dev, "failed: power supply register\n"); + return ret; } static int __devexit max17042_remove(struct i2c_client *client) @@ -269,10 +718,17 @@ static int __devexit max17042_remove(struct i2c_client *client) struct max17042_chip *chip = i2c_get_clientdata(client); power_supply_unregister(&chip->battery); - kfree(chip); return 0; } +#ifdef CONFIG_OF +static const struct of_device_id max17042_dt_match[] = { + { .compatible = "maxim,max17042" }, + { }, +}; +MODULE_DEVICE_TABLE(of, max17042_dt_match); +#endif + static const struct i2c_device_id max17042_id[] = { { "max17042", 0 }, { } @@ -282,23 +738,13 @@ MODULE_DEVICE_TABLE(i2c, max17042_id); static struct i2c_driver max17042_i2c_driver = { .driver = { .name = "max17042", + .of_match_table = of_match_ptr(max17042_dt_match), }, .probe = max17042_probe, .remove = __devexit_p(max17042_remove), .id_table = max17042_id, }; - -static int __init max17042_init(void) -{ - return i2c_add_driver(&max17042_i2c_driver); -} -module_init(max17042_init); - -static void __exit max17042_exit(void) -{ - i2c_del_driver(&max17042_i2c_driver); -} -module_exit(max17042_exit); +module_i2c_driver(max17042_i2c_driver); MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); MODULE_DESCRIPTION("MAX17042 Fuel Gauge"); diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c index 9ff8af0..06b659d 100644 --- a/drivers/power/sbs-battery.c +++ b/drivers/power/sbs-battery.c @@ -852,18 +852,7 @@ static struct i2c_driver sbs_battery_driver = { .of_match_table = sbs_dt_ids, }, }; - -static int __init sbs_battery_init(void) -{ - return i2c_add_driver(&sbs_battery_driver); -} -module_init(sbs_battery_init); - -static void __exit sbs_battery_exit(void) -{ - i2c_del_driver(&sbs_battery_driver); -} -module_exit(sbs_battery_exit); +module_i2c_driver(sbs_battery_driver); MODULE_DESCRIPTION("SBS battery monitor driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/power/smb347-charger.c b/drivers/power/smb347-charger.c new file mode 100644 index 0000000..ce1694d --- /dev/null +++ b/drivers/power/smb347-charger.c @@ -0,0 +1,1294 @@ +/* + * Summit Microelectronics SMB347 Battery Charger Driver + * + * Copyright (C) 2011, Intel Corporation + * + * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/debugfs.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/power_supply.h> +#include <linux/power/smb347-charger.h> +#include <linux/seq_file.h> + +/* + * Configuration registers. These are mirrored to volatile RAM and can be + * written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be + * reloaded from non-volatile registers after POR. + */ +#define CFG_CHARGE_CURRENT 0x00 +#define CFG_CHARGE_CURRENT_FCC_MASK 0xe0 +#define CFG_CHARGE_CURRENT_FCC_SHIFT 5 +#define CFG_CHARGE_CURRENT_PCC_MASK 0x18 +#define CFG_CHARGE_CURRENT_PCC_SHIFT 3 +#define CFG_CHARGE_CURRENT_TC_MASK 0x07 +#define CFG_CURRENT_LIMIT 0x01 +#define CFG_CURRENT_LIMIT_DC_MASK 0xf0 +#define CFG_CURRENT_LIMIT_DC_SHIFT 4 +#define CFG_CURRENT_LIMIT_USB_MASK 0x0f +#define CFG_FLOAT_VOLTAGE 0x03 +#define CFG_FLOAT_VOLTAGE_THRESHOLD_MASK 0xc0 +#define CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT 6 +#define CFG_STAT 0x05 +#define CFG_STAT_DISABLED BIT(5) +#define CFG_STAT_ACTIVE_HIGH BIT(7) +#define CFG_PIN 0x06 +#define CFG_PIN_EN_CTRL_MASK 0x60 +#define CFG_PIN_EN_CTRL_ACTIVE_HIGH 0x40 +#define CFG_PIN_EN_CTRL_ACTIVE_LOW 0x60 +#define CFG_PIN_EN_APSD_IRQ BIT(1) +#define CFG_PIN_EN_CHARGER_ERROR BIT(2) +#define CFG_THERM 0x07 +#define CFG_THERM_SOFT_HOT_COMPENSATION_MASK 0x03 +#define CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT 0 +#define CFG_THERM_SOFT_COLD_COMPENSATION_MASK 0x0c +#define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT 2 +#define CFG_THERM_MONITOR_DISABLED BIT(4) +#define CFG_SYSOK 0x08 +#define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED BIT(2) +#define CFG_OTHER 0x09 +#define CFG_OTHER_RID_MASK 0xc0 +#define CFG_OTHER_RID_ENABLED_AUTO_OTG 0xc0 +#define CFG_OTG 0x0a +#define CFG_OTG_TEMP_THRESHOLD_MASK 0x30 +#define CFG_OTG_TEMP_THRESHOLD_SHIFT 4 +#define CFG_OTG_CC_COMPENSATION_MASK 0xc0 +#define CFG_OTG_CC_COMPENSATION_SHIFT 6 +#define CFG_TEMP_LIMIT 0x0b +#define CFG_TEMP_LIMIT_SOFT_HOT_MASK 0x03 +#define CFG_TEMP_LIMIT_SOFT_HOT_SHIFT 0 +#define CFG_TEMP_LIMIT_SOFT_COLD_MASK 0x0c +#define CFG_TEMP_LIMIT_SOFT_COLD_SHIFT 2 +#define CFG_TEMP_LIMIT_HARD_HOT_MASK 0x30 +#define CFG_TEMP_LIMIT_HARD_HOT_SHIFT 4 +#define CFG_TEMP_LIMIT_HARD_COLD_MASK 0xc0 +#define CFG_TEMP_LIMIT_HARD_COLD_SHIFT 6 +#define CFG_FAULT_IRQ 0x0c +#define CFG_FAULT_IRQ_DCIN_UV BIT(2) +#define CFG_STATUS_IRQ 0x0d +#define CFG_STATUS_IRQ_TERMINATION_OR_TAPER BIT(4) +#define CFG_ADDRESS 0x0e + +/* Command registers */ +#define CMD_A 0x30 +#define CMD_A_CHG_ENABLED BIT(1) +#define CMD_A_SUSPEND_ENABLED BIT(2) +#define CMD_A_ALLOW_WRITE BIT(7) +#define CMD_B 0x31 +#define CMD_C 0x33 + +/* Interrupt Status registers */ +#define IRQSTAT_A 0x35 +#define IRQSTAT_C 0x37 +#define IRQSTAT_C_TERMINATION_STAT BIT(0) +#define IRQSTAT_C_TERMINATION_IRQ BIT(1) +#define IRQSTAT_C_TAPER_IRQ BIT(3) +#define IRQSTAT_E 0x39 +#define IRQSTAT_E_USBIN_UV_STAT BIT(0) +#define IRQSTAT_E_USBIN_UV_IRQ BIT(1) +#define IRQSTAT_E_DCIN_UV_STAT BIT(4) +#define IRQSTAT_E_DCIN_UV_IRQ BIT(5) +#define IRQSTAT_F 0x3a + +/* Status registers */ +#define STAT_A 0x3b +#define STAT_A_FLOAT_VOLTAGE_MASK 0x3f +#define STAT_B 0x3c +#define STAT_C 0x3d +#define STAT_C_CHG_ENABLED BIT(0) +#define STAT_C_CHG_MASK 0x06 +#define STAT_C_CHG_SHIFT 1 +#define STAT_C_CHARGER_ERROR BIT(6) +#define STAT_E 0x3f + +/** + * struct smb347_charger - smb347 charger instance + * @lock: protects concurrent access to online variables + * @client: pointer to i2c client + * @mains: power_supply instance for AC/DC power + * @usb: power_supply instance for USB power + * @battery: power_supply instance for battery + * @mains_online: is AC/DC input connected + * @usb_online: is USB input connected + * @charging_enabled: is charging enabled + * @dentry: for debugfs + * @pdata: pointer to platform data + */ +struct smb347_charger { + struct mutex lock; + struct i2c_client *client; + struct power_supply mains; + struct power_supply usb; + struct power_supply battery; + bool mains_online; + bool usb_online; + bool charging_enabled; + struct dentry *dentry; + const struct smb347_charger_platform_data *pdata; +}; + +/* Fast charge current in uA */ +static const unsigned int fcc_tbl[] = { + 700000, + 900000, + 1200000, + 1500000, + 1800000, + 2000000, + 2200000, + 2500000, +}; + +/* Pre-charge current in uA */ +static const unsigned int pcc_tbl[] = { + 100000, + 150000, + 200000, + 250000, +}; + +/* Termination current in uA */ +static const unsigned int tc_tbl[] = { + 37500, + 50000, + 100000, + 150000, + 200000, + 250000, + 500000, + 600000, +}; + +/* Input current limit in uA */ +static const unsigned int icl_tbl[] = { + 300000, + 500000, + 700000, + 900000, + 1200000, + 1500000, + 1800000, + 2000000, + 2200000, + 2500000, +}; + +/* Charge current compensation in uA */ +static const unsigned int ccc_tbl[] = { + 250000, + 700000, + 900000, + 1200000, +}; + +/* Convert register value to current using lookup table */ +static int hw_to_current(const unsigned int *tbl, size_t size, unsigned int val) +{ + if (val >= size) + return -EINVAL; + return tbl[val]; +} + +/* Convert current to register value using lookup table */ +static int current_to_hw(const unsigned int *tbl, size_t size, unsigned int val) +{ + size_t i; + + for (i = 0; i < size; i++) + if (val < tbl[i]) + break; + return i > 0 ? i - 1 : -EINVAL; +} + +static int smb347_read(struct smb347_charger *smb, u8 reg) +{ + int ret; + + ret = i2c_smbus_read_byte_data(smb->client, reg); + if (ret < 0) + dev_warn(&smb->client->dev, "failed to read reg 0x%x: %d\n", + reg, ret); + return ret; +} + +static int smb347_write(struct smb347_charger *smb, u8 reg, u8 val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(smb->client, reg, val); + if (ret < 0) + dev_warn(&smb->client->dev, "failed to write reg 0x%x: %d\n", + reg, ret); + return ret; +} + +/** + * smb347_update_status - updates the charging status + * @smb: pointer to smb347 charger instance + * + * Function checks status of the charging and updates internal state + * accordingly. Returns %0 if there is no change in status, %1 if the + * status has changed and negative errno in case of failure. + */ +static int smb347_update_status(struct smb347_charger *smb) +{ + bool usb = false; + bool dc = false; + int ret; + + ret = smb347_read(smb, IRQSTAT_E); + if (ret < 0) + return ret; + + /* + * Dc and usb are set depending on whether they are enabled in + * platform data _and_ whether corresponding undervoltage is set. + */ + if (smb->pdata->use_mains) + dc = !(ret & IRQSTAT_E_DCIN_UV_STAT); + if (smb->pdata->use_usb) + usb = !(ret & IRQSTAT_E_USBIN_UV_STAT); + + mutex_lock(&smb->lock); + ret = smb->mains_online != dc || smb->usb_online != usb; + smb->mains_online = dc; + smb->usb_online = usb; + mutex_unlock(&smb->lock); + + return ret; +} + +/* + * smb347_is_online - returns whether input power source is connected + * @smb: pointer to smb347 charger instance + * + * Returns %true if input power source is connected. Note that this is + * dependent on what platform has configured for usable power sources. For + * example if USB is disabled, this will return %false even if the USB + * cable is connected. + */ +static bool smb347_is_online(struct smb347_charger *smb) +{ + bool ret; + + mutex_lock(&smb->lock); + ret = smb->usb_online || smb->mains_online; + mutex_unlock(&smb->lock); + + return ret; +} + +/** + * smb347_charging_status - returns status of charging + * @smb: pointer to smb347 charger instance + * + * Function returns charging status. %0 means no charging is in progress, + * %1 means pre-charging, %2 fast-charging and %3 taper-charging. + */ +static int smb347_charging_status(struct smb347_charger *smb) +{ + int ret; + + if (!smb347_is_online(smb)) + return 0; + + ret = smb347_read(smb, STAT_C); + if (ret < 0) + return 0; + + return (ret & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT; +} + +static int smb347_charging_set(struct smb347_charger *smb, bool enable) +{ + int ret = 0; + + if (smb->pdata->enable_control != SMB347_CHG_ENABLE_SW) { + dev_dbg(&smb->client->dev, + "charging enable/disable in SW disabled\n"); + return 0; + } + + mutex_lock(&smb->lock); + if (smb->charging_enabled != enable) { + ret = smb347_read(smb, CMD_A); + if (ret < 0) + goto out; + + smb->charging_enabled = enable; + + if (enable) + ret |= CMD_A_CHG_ENABLED; + else + ret &= ~CMD_A_CHG_ENABLED; + + ret = smb347_write(smb, CMD_A, ret); + } +out: + mutex_unlock(&smb->lock); + return ret; +} + +static inline int smb347_charging_enable(struct smb347_charger *smb) +{ + return smb347_charging_set(smb, true); +} + +static inline int smb347_charging_disable(struct smb347_charger *smb) +{ + return smb347_charging_set(smb, false); +} + +static int smb347_update_online(struct smb347_charger *smb) +{ + int ret; + + /* + * Depending on whether valid power source is connected or not, we + * disable or enable the charging. We do it manually because it + * depends on how the platform has configured the valid inputs. + */ + if (smb347_is_online(smb)) { + ret = smb347_charging_enable(smb); + if (ret < 0) + dev_err(&smb->client->dev, + "failed to enable charging\n"); + } else { + ret = smb347_charging_disable(smb); + if (ret < 0) + dev_err(&smb->client->dev, + "failed to disable charging\n"); + } + + return ret; +} + +static int smb347_set_charge_current(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_CHARGE_CURRENT); + if (ret < 0) + return ret; + + if (smb->pdata->max_charge_current) { + val = current_to_hw(fcc_tbl, ARRAY_SIZE(fcc_tbl), + smb->pdata->max_charge_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_FCC_MASK; + ret |= val << CFG_CHARGE_CURRENT_FCC_SHIFT; + } + + if (smb->pdata->pre_charge_current) { + val = current_to_hw(pcc_tbl, ARRAY_SIZE(pcc_tbl), + smb->pdata->pre_charge_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_PCC_MASK; + ret |= val << CFG_CHARGE_CURRENT_PCC_SHIFT; + } + + if (smb->pdata->termination_current) { + val = current_to_hw(tc_tbl, ARRAY_SIZE(tc_tbl), + smb->pdata->termination_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_TC_MASK; + ret |= val; + } + + return smb347_write(smb, CFG_CHARGE_CURRENT, ret); +} + +static int smb347_set_current_limits(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_CURRENT_LIMIT); + if (ret < 0) + return ret; + + if (smb->pdata->mains_current_limit) { + val = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl), + smb->pdata->mains_current_limit); + if (val < 0) + return val; + + ret &= ~CFG_CURRENT_LIMIT_DC_MASK; + ret |= val << CFG_CURRENT_LIMIT_DC_SHIFT; + } + + if (smb->pdata->usb_hc_current_limit) { + val = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl), + smb->pdata->usb_hc_current_limit); + if (val < 0) + return val; + + ret &= ~CFG_CURRENT_LIMIT_USB_MASK; + ret |= val; + } + + return smb347_write(smb, CFG_CURRENT_LIMIT, ret); +} + +static int smb347_set_voltage_limits(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_FLOAT_VOLTAGE); + if (ret < 0) + return ret; + + if (smb->pdata->pre_to_fast_voltage) { + val = smb->pdata->pre_to_fast_voltage; + + /* uV */ + val = clamp_val(val, 2400000, 3000000) - 2400000; + val /= 200000; + + ret &= ~CFG_FLOAT_VOLTAGE_THRESHOLD_MASK; + ret |= val << CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT; + } + + if (smb->pdata->max_charge_voltage) { + val = smb->pdata->max_charge_voltage; + + /* uV */ + val = clamp_val(val, 3500000, 4500000) - 3500000; + val /= 20000; + + ret |= val; + } + + return smb347_write(smb, CFG_FLOAT_VOLTAGE, ret); +} + +static int smb347_set_temp_limits(struct smb347_charger *smb) +{ + bool enable_therm_monitor = false; + int ret, val; + + if (smb->pdata->chip_temp_threshold) { + val = smb->pdata->chip_temp_threshold; + + /* degree C */ + val = clamp_val(val, 100, 130) - 100; + val /= 10; + + ret = smb347_read(smb, CFG_OTG); + if (ret < 0) + return ret; + + ret &= ~CFG_OTG_TEMP_THRESHOLD_MASK; + ret |= val << CFG_OTG_TEMP_THRESHOLD_SHIFT; + + ret = smb347_write(smb, CFG_OTG, ret); + if (ret < 0) + return ret; + } + + ret = smb347_read(smb, CFG_TEMP_LIMIT); + if (ret < 0) + return ret; + + if (smb->pdata->soft_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->soft_cold_temp_limit; + + val = clamp_val(val, 0, 15); + val /= 5; + /* this goes from higher to lower so invert the value */ + val = ~val & 0x3; + + ret &= ~CFG_TEMP_LIMIT_SOFT_COLD_MASK; + ret |= val << CFG_TEMP_LIMIT_SOFT_COLD_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->soft_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->soft_hot_temp_limit; + + val = clamp_val(val, 40, 55) - 40; + val /= 5; + + ret &= ~CFG_TEMP_LIMIT_SOFT_HOT_MASK; + ret |= val << CFG_TEMP_LIMIT_SOFT_HOT_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->hard_cold_temp_limit; + + val = clamp_val(val, -5, 10) + 5; + val /= 5; + /* this goes from higher to lower so invert the value */ + val = ~val & 0x3; + + ret &= ~CFG_TEMP_LIMIT_HARD_COLD_MASK; + ret |= val << CFG_TEMP_LIMIT_HARD_COLD_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->hard_hot_temp_limit; + + val = clamp_val(val, 50, 65) - 50; + val /= 5; + + ret &= ~CFG_TEMP_LIMIT_HARD_HOT_MASK; + ret |= val << CFG_TEMP_LIMIT_HARD_HOT_SHIFT; + + enable_therm_monitor = true; + } + + ret = smb347_write(smb, CFG_TEMP_LIMIT, ret); + if (ret < 0) + return ret; + + /* + * If any of the temperature limits are set, we also enable the + * thermistor monitoring. + * + * When soft limits are hit, the device will start to compensate + * current and/or voltage depending on the configuration. + * + * When hard limit is hit, the device will suspend charging + * depending on the configuration. + */ + if (enable_therm_monitor) { + ret = smb347_read(smb, CFG_THERM); + if (ret < 0) + return ret; + + ret &= ~CFG_THERM_MONITOR_DISABLED; + + ret = smb347_write(smb, CFG_THERM, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->suspend_on_hard_temp_limit) { + ret = smb347_read(smb, CFG_SYSOK); + if (ret < 0) + return ret; + + ret &= ~CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED; + + ret = smb347_write(smb, CFG_SYSOK, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->soft_temp_limit_compensation != + SMB347_SOFT_TEMP_COMPENSATE_DEFAULT) { + val = smb->pdata->soft_temp_limit_compensation & 0x3; + + ret = smb347_read(smb, CFG_THERM); + if (ret < 0) + return ret; + + ret &= ~CFG_THERM_SOFT_HOT_COMPENSATION_MASK; + ret |= val << CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT; + + ret &= ~CFG_THERM_SOFT_COLD_COMPENSATION_MASK; + ret |= val << CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT; + + ret = smb347_write(smb, CFG_THERM, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->charge_current_compensation) { + val = current_to_hw(ccc_tbl, ARRAY_SIZE(ccc_tbl), + smb->pdata->charge_current_compensation); + if (val < 0) + return val; + + ret = smb347_read(smb, CFG_OTG); + if (ret < 0) + return ret; + + ret &= ~CFG_OTG_CC_COMPENSATION_MASK; + ret |= (val & 0x3) << CFG_OTG_CC_COMPENSATION_SHIFT; + + ret = smb347_write(smb, CFG_OTG, ret); + if (ret < 0) + return ret; + } + + return ret; +} + +/* + * smb347_set_writable - enables/disables writing to non-volatile registers + * @smb: pointer to smb347 charger instance + * + * You can enable/disable writing to the non-volatile configuration + * registers by calling this function. + * + * Returns %0 on success and negative errno in case of failure. + */ +static int smb347_set_writable(struct smb347_charger *smb, bool writable) +{ + int ret; + + ret = smb347_read(smb, CMD_A); + if (ret < 0) + return ret; + + if (writable) + ret |= CMD_A_ALLOW_WRITE; + else + ret &= ~CMD_A_ALLOW_WRITE; + + return smb347_write(smb, CMD_A, ret); +} + +static int smb347_hw_init(struct smb347_charger *smb) +{ + int ret; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + return ret; + + /* + * Program the platform specific configuration values to the device + * first. + */ + ret = smb347_set_charge_current(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_current_limits(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_voltage_limits(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_temp_limits(smb); + if (ret < 0) + goto fail; + + /* If USB charging is disabled we put the USB in suspend mode */ + if (!smb->pdata->use_usb) { + ret = smb347_read(smb, CMD_A); + if (ret < 0) + goto fail; + + ret |= CMD_A_SUSPEND_ENABLED; + + ret = smb347_write(smb, CMD_A, ret); + if (ret < 0) + goto fail; + } + + ret = smb347_read(smb, CFG_OTHER); + if (ret < 0) + goto fail; + + /* + * If configured by platform data, we enable hardware Auto-OTG + * support for driving VBUS. Otherwise we disable it. + */ + ret &= ~CFG_OTHER_RID_MASK; + if (smb->pdata->use_usb_otg) + ret |= CFG_OTHER_RID_ENABLED_AUTO_OTG; + + ret = smb347_write(smb, CFG_OTHER, ret); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + /* + * Make the charging functionality controllable by a write to the + * command register unless pin control is specified in the platform + * data. + */ + ret &= ~CFG_PIN_EN_CTRL_MASK; + + switch (smb->pdata->enable_control) { + case SMB347_CHG_ENABLE_SW: + /* Do nothing, 0 means i2c control */ + break; + case SMB347_CHG_ENABLE_PIN_ACTIVE_LOW: + ret |= CFG_PIN_EN_CTRL_ACTIVE_LOW; + break; + case SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH: + ret |= CFG_PIN_EN_CTRL_ACTIVE_HIGH; + break; + } + + /* Disable Automatic Power Source Detection (APSD) interrupt. */ + ret &= ~CFG_PIN_EN_APSD_IRQ; + + ret = smb347_write(smb, CFG_PIN, ret); + if (ret < 0) + goto fail; + + ret = smb347_update_status(smb); + if (ret < 0) + goto fail; + + ret = smb347_update_online(smb); + +fail: + smb347_set_writable(smb, false); + return ret; +} + +static irqreturn_t smb347_interrupt(int irq, void *data) +{ + struct smb347_charger *smb = data; + int stat_c, irqstat_e, irqstat_c; + irqreturn_t ret = IRQ_NONE; + + stat_c = smb347_read(smb, STAT_C); + if (stat_c < 0) { + dev_warn(&smb->client->dev, "reading STAT_C failed\n"); + return IRQ_NONE; + } + + irqstat_c = smb347_read(smb, IRQSTAT_C); + if (irqstat_c < 0) { + dev_warn(&smb->client->dev, "reading IRQSTAT_C failed\n"); + return IRQ_NONE; + } + + irqstat_e = smb347_read(smb, IRQSTAT_E); + if (irqstat_e < 0) { + dev_warn(&smb->client->dev, "reading IRQSTAT_E failed\n"); + return IRQ_NONE; + } + + /* + * If we get charger error we report the error back to user and + * disable charging. + */ + if (stat_c & STAT_C_CHARGER_ERROR) { + dev_err(&smb->client->dev, + "error in charger, disabling charging\n"); + + smb347_charging_disable(smb); + power_supply_changed(&smb->battery); + + ret = IRQ_HANDLED; + } + + /* + * If we reached the termination current the battery is charged and + * we can update the status now. Charging is automatically + * disabled by the hardware. + */ + if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) { + if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) + power_supply_changed(&smb->battery); + ret = IRQ_HANDLED; + } + + /* + * If we got an under voltage interrupt it means that AC/USB input + * was connected or disconnected. + */ + if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) { + if (smb347_update_status(smb) > 0) { + smb347_update_online(smb); + power_supply_changed(&smb->mains); + power_supply_changed(&smb->usb); + } + ret = IRQ_HANDLED; + } + + return ret; +} + +static int smb347_irq_set(struct smb347_charger *smb, bool enable) +{ + int ret; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + return ret; + + /* + * Enable/disable interrupts for: + * - under voltage + * - termination current reached + * - charger error + */ + if (enable) { + ret = smb347_write(smb, CFG_FAULT_IRQ, CFG_FAULT_IRQ_DCIN_UV); + if (ret < 0) + goto fail; + + ret = smb347_write(smb, CFG_STATUS_IRQ, + CFG_STATUS_IRQ_TERMINATION_OR_TAPER); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + ret |= CFG_PIN_EN_CHARGER_ERROR; + + ret = smb347_write(smb, CFG_PIN, ret); + } else { + ret = smb347_write(smb, CFG_FAULT_IRQ, 0); + if (ret < 0) + goto fail; + + ret = smb347_write(smb, CFG_STATUS_IRQ, 0); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + ret &= ~CFG_PIN_EN_CHARGER_ERROR; + + ret = smb347_write(smb, CFG_PIN, ret); + } + +fail: + smb347_set_writable(smb, false); + return ret; +} + +static inline int smb347_irq_enable(struct smb347_charger *smb) +{ + return smb347_irq_set(smb, true); +} + +static inline int smb347_irq_disable(struct smb347_charger *smb) +{ + return smb347_irq_set(smb, false); +} + +static int smb347_irq_init(struct smb347_charger *smb) +{ + const struct smb347_charger_platform_data *pdata = smb->pdata; + int ret, irq = gpio_to_irq(pdata->irq_gpio); + + ret = gpio_request_one(pdata->irq_gpio, GPIOF_IN, smb->client->name); + if (ret < 0) + goto fail; + + ret = request_threaded_irq(irq, NULL, smb347_interrupt, + IRQF_TRIGGER_FALLING, smb->client->name, + smb); + if (ret < 0) + goto fail_gpio; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + goto fail_irq; + + /* + * Configure the STAT output to be suitable for interrupts: disable + * all other output (except interrupts) and make it active low. + */ + ret = smb347_read(smb, CFG_STAT); + if (ret < 0) + goto fail_readonly; + + ret &= ~CFG_STAT_ACTIVE_HIGH; + ret |= CFG_STAT_DISABLED; + + ret = smb347_write(smb, CFG_STAT, ret); + if (ret < 0) + goto fail_readonly; + + ret = smb347_irq_enable(smb); + if (ret < 0) + goto fail_readonly; + + smb347_set_writable(smb, false); + smb->client->irq = irq; + return 0; + +fail_readonly: + smb347_set_writable(smb, false); +fail_irq: + free_irq(irq, smb); +fail_gpio: + gpio_free(pdata->irq_gpio); +fail: + smb->client->irq = 0; + return ret; +} + +static int smb347_mains_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, mains); + + if (prop == POWER_SUPPLY_PROP_ONLINE) { + val->intval = smb->mains_online; + return 0; + } + return -EINVAL; +} + +static enum power_supply_property smb347_mains_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int smb347_usb_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, usb); + + if (prop == POWER_SUPPLY_PROP_ONLINE) { + val->intval = smb->usb_online; + return 0; + } + return -EINVAL; +} + +static enum power_supply_property smb347_usb_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int smb347_battery_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, battery); + const struct smb347_charger_platform_data *pdata = smb->pdata; + int ret; + + ret = smb347_update_status(smb); + if (ret < 0) + return ret; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + if (!smb347_is_online(smb)) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + } + if (smb347_charging_status(smb)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (!smb347_is_online(smb)) + return -ENODATA; + + /* + * We handle trickle and pre-charging the same, and taper + * and none the same. + */ + switch (smb347_charging_status(smb)) { + case 1: + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case 2: + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + default: + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = pdata->battery_info.technology; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = pdata->battery_info.voltage_min_design; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = pdata->battery_info.voltage_max_design; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (!smb347_is_online(smb)) + return -ENODATA; + ret = smb347_read(smb, STAT_A); + if (ret < 0) + return ret; + + ret &= STAT_A_FLOAT_VOLTAGE_MASK; + if (ret > 0x3d) + ret = 0x3d; + + val->intval = 3500000 + ret * 20000; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (!smb347_is_online(smb)) + return -ENODATA; + + ret = smb347_read(smb, STAT_B); + if (ret < 0) + return ret; + + /* + * The current value is composition of FCC and PCC values + * and we can detect which table to use from bit 5. + */ + if (ret & 0x20) { + val->intval = hw_to_current(fcc_tbl, + ARRAY_SIZE(fcc_tbl), + ret & 7); + } else { + ret >>= 3; + val->intval = hw_to_current(pcc_tbl, + ARRAY_SIZE(pcc_tbl), + ret & 7); + } + break; + + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = pdata->battery_info.charge_full_design; + break; + + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = pdata->battery_info.name; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property smb347_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_MODEL_NAME, +}; + +static int smb347_debugfs_show(struct seq_file *s, void *data) +{ + struct smb347_charger *smb = s->private; + int ret; + u8 reg; + + seq_printf(s, "Control registers:\n"); + seq_printf(s, "==================\n"); + for (reg = CFG_CHARGE_CURRENT; reg <= CFG_ADDRESS; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + seq_printf(s, "\n"); + + seq_printf(s, "Command registers:\n"); + seq_printf(s, "==================\n"); + ret = smb347_read(smb, CMD_A); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_A, ret); + ret = smb347_read(smb, CMD_B); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_B, ret); + ret = smb347_read(smb, CMD_C); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_C, ret); + seq_printf(s, "\n"); + + seq_printf(s, "Interrupt status registers:\n"); + seq_printf(s, "===========================\n"); + for (reg = IRQSTAT_A; reg <= IRQSTAT_F; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + seq_printf(s, "\n"); + + seq_printf(s, "Status registers:\n"); + seq_printf(s, "=================\n"); + for (reg = STAT_A; reg <= STAT_E; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + + return 0; +} + +static int smb347_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, smb347_debugfs_show, inode->i_private); +} + +static const struct file_operations smb347_debugfs_fops = { + .open = smb347_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smb347_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + static char *battery[] = { "smb347-battery" }; + const struct smb347_charger_platform_data *pdata; + struct device *dev = &client->dev; + struct smb347_charger *smb; + int ret; + + pdata = dev->platform_data; + if (!pdata) + return -EINVAL; + + if (!pdata->use_mains && !pdata->use_usb) + return -EINVAL; + + smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL); + if (!smb) + return -ENOMEM; + + i2c_set_clientdata(client, smb); + + mutex_init(&smb->lock); + smb->client = client; + smb->pdata = pdata; + + ret = smb347_hw_init(smb); + if (ret < 0) + return ret; + + smb->mains.name = "smb347-mains"; + smb->mains.type = POWER_SUPPLY_TYPE_MAINS; + smb->mains.get_property = smb347_mains_get_property; + smb->mains.properties = smb347_mains_properties; + smb->mains.num_properties = ARRAY_SIZE(smb347_mains_properties); + smb->mains.supplied_to = battery; + smb->mains.num_supplicants = ARRAY_SIZE(battery); + + smb->usb.name = "smb347-usb"; + smb->usb.type = POWER_SUPPLY_TYPE_USB; + smb->usb.get_property = smb347_usb_get_property; + smb->usb.properties = smb347_usb_properties; + smb->usb.num_properties = ARRAY_SIZE(smb347_usb_properties); + smb->usb.supplied_to = battery; + smb->usb.num_supplicants = ARRAY_SIZE(battery); + + smb->battery.name = "smb347-battery"; + smb->battery.type = POWER_SUPPLY_TYPE_BATTERY; + smb->battery.get_property = smb347_battery_get_property; + smb->battery.properties = smb347_battery_properties; + smb->battery.num_properties = ARRAY_SIZE(smb347_battery_properties); + + ret = power_supply_register(dev, &smb->mains); + if (ret < 0) + return ret; + + ret = power_supply_register(dev, &smb->usb); + if (ret < 0) { + power_supply_unregister(&smb->mains); + return ret; + } + + ret = power_supply_register(dev, &smb->battery); + if (ret < 0) { + power_supply_unregister(&smb->usb); + power_supply_unregister(&smb->mains); + return ret; + } + + /* + * Interrupt pin is optional. If it is connected, we setup the + * interrupt support here. + */ + if (pdata->irq_gpio >= 0) { + ret = smb347_irq_init(smb); + if (ret < 0) { + dev_warn(dev, "failed to initialize IRQ: %d\n", ret); + dev_warn(dev, "disabling IRQ support\n"); + } + } + + smb->dentry = debugfs_create_file("smb347-regs", S_IRUSR, NULL, smb, + &smb347_debugfs_fops); + return 0; +} + +static int smb347_remove(struct i2c_client *client) +{ + struct smb347_charger *smb = i2c_get_clientdata(client); + + if (!IS_ERR_OR_NULL(smb->dentry)) + debugfs_remove(smb->dentry); + + if (client->irq) { + smb347_irq_disable(smb); + free_irq(client->irq, smb); + gpio_free(smb->pdata->irq_gpio); + } + + power_supply_unregister(&smb->battery); + power_supply_unregister(&smb->usb); + power_supply_unregister(&smb->mains); + return 0; +} + +static const struct i2c_device_id smb347_id[] = { + { "smb347", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, smb347_id); + +static struct i2c_driver smb347_driver = { + .driver = { + .name = "smb347", + }, + .probe = smb347_probe, + .remove = __devexit_p(smb347_remove), + .id_table = smb347_id, +}; + +static int __init smb347_init(void) +{ + return i2c_add_driver(&smb347_driver); +} +module_init(smb347_init); + +static void __exit smb347_exit(void) +{ + i2c_del_driver(&smb347_driver); +} +module_exit(smb347_exit); + +MODULE_AUTHOR("Bruce E. Robertson <bruce.e.robertson@intel.com>"); +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); +MODULE_DESCRIPTION("SMB347 battery charger driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("i2c:smb347"); diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c index 636ebb2..8c9a607 100644 --- a/drivers/power/z2_battery.c +++ b/drivers/power/z2_battery.c @@ -316,19 +316,7 @@ static struct i2c_driver z2_batt_driver = { .remove = __devexit_p(z2_batt_remove), .id_table = z2_batt_id, }; - -static int __init z2_batt_init(void) -{ - return i2c_add_driver(&z2_batt_driver); -} - -static void __exit z2_batt_exit(void) -{ - i2c_del_driver(&z2_batt_driver); -} - -module_init(z2_batt_init); -module_exit(z2_batt_exit); +module_i2c_driver(z2_batt_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Edwards <sweetlilmre@gmail.com>"); diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index dc87eda..eb415bd 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -458,6 +458,11 @@ int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled) if (rtc->uie_rtctimer.enabled == enabled) goto out; + if (rtc->uie_unsupported) { + err = -EINVAL; + goto out; + } + if (enabled) { struct rtc_time tm; ktime_t now, onesec; diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c index f04761e..afee0e8 100644 --- a/drivers/rtc/rtc-88pm860x.c +++ b/drivers/rtc/rtc-88pm860x.c @@ -376,6 +376,9 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work); schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL); #endif /* VRTC_CALIBRATION */ + + device_init_wakeup(&pdev->dev, 1); + return 0; out_rtc: free_irq(info->irq, info); @@ -401,10 +404,34 @@ static int __devexit pm860x_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_rtc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_RTC; + return 0; +} +static int pm860x_rtc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume); + static struct platform_driver pm860x_rtc_driver = { .driver = { .name = "88pm860x-rtc", .owner = THIS_MODULE, + .pm = &pm860x_rtc_pm_ops, }, .probe = pm860x_rtc_probe, .remove = __devexit_p(pm860x_rtc_remove), diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c index e954a75..42f5f82 100644 --- a/drivers/rtc/rtc-mpc5121.c +++ b/drivers/rtc/rtc-mpc5121.c @@ -360,6 +360,8 @@ static int __devinit mpc5121_rtc_probe(struct platform_device *op) &mpc5200_rtc_ops, THIS_MODULE); } + rtc->rtc->uie_unsupported = 1; + if (IS_ERR(rtc->rtc)) { err = PTR_ERR(rtc->rtc); goto out_free_irq; diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c index 1300962..b2185f4 100644 --- a/drivers/rtc/rtc-mv.c +++ b/drivers/rtc/rtc-mv.c @@ -12,6 +12,7 @@ #include <linux/bcd.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <linux/delay.h> #include <linux/gfp.h> #include <linux/module.h> @@ -294,11 +295,19 @@ static int __exit mv_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static struct of_device_id rtc_mv_of_match_table[] = { + { .compatible = "mrvl,orion-rtc", }, + {} +}; +#endif + static struct platform_driver mv_rtc_driver = { .remove = __exit_p(mv_rtc_remove), .driver = { .name = "rtc-mv", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(rtc_mv_of_match_table), }, }; diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index fa512ed..50a5c4a 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -33,9 +33,10 @@ #include <linux/of.h> #include <linux/pm.h> #include <linux/bitops.h> +#include <linux/io.h> #include <mach/hardware.h> -#include <asm/irq.h> +#include <mach/irqs.h> #if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) #include <mach/regs-rtc.h> diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 168525a..231a1d8 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -21,6 +21,7 @@ #include <asm/chpid.h> #include <asm/sclp.h> #include <asm/setup.h> +#include <asm/ctl_reg.h> #include "sclp.h" diff --git a/drivers/s390/cio/crw.c b/drivers/s390/cio/crw.c index 425f741..d0a2dff 100644 --- a/drivers/s390/cio/crw.c +++ b/drivers/s390/cio/crw.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/wait.h> #include <asm/crw.h> +#include <asm/ctl_reg.h> static DEFINE_MUTEX(crw_handler_mutex); static crw_handler_t crw_handlers[NR_RSCS]; diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 2a0dfcb..35c685c 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1458,7 +1458,6 @@ int qdio_establish(struct qdio_initialize *init_data) } qdio_setup_ssqd_info(irq_ptr); - DBF_EVENT("qib ac:%4x", irq_ptr->qib.ac); qdio_detect_hsicq(irq_ptr); diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index 452989a..ecf12f0 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -311,7 +311,8 @@ void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr) check_and_setup_qebsm(irq_ptr, qdioac, irq_ptr->ssqd_desc.sch_token); process_ac_flags(irq_ptr, qdioac); - DBF_EVENT("qdioac:%4x", qdioac); + DBF_EVENT("ac 1:%2x 2:%4x", qdioac, irq_ptr->ssqd_desc.qdioac2); + DBF_EVENT("3:%4x qib:%4x", irq_ptr->ssqd_desc.qdioac3, irq_ptr->qib.ac); } void qdio_release_memory(struct qdio_irq *irq_ptr) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 12ae181..7e9a72e 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -42,10 +42,10 @@ #include <asm/reset.h> #include <asm/airq.h> #include <linux/atomic.h> -#include <asm/system.h> #include <asm/isc.h> #include <linux/hrtimer.h> #include <linux/ktime.h> +#include <asm/facility.h> #include "ap_bus.h" diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c index 826157f..327657e 100644 --- a/drivers/sbus/char/flash.c +++ b/drivers/sbus/char/flash.c @@ -16,7 +16,6 @@ #include <linux/of.h> #include <linux/of_device.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/io.h> diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c index 8d6e508..2236aea 100644 --- a/drivers/sbus/char/openprom.c +++ b/drivers/sbus/char/openprom.c @@ -40,7 +40,6 @@ #include <linux/fs.h> #include <asm/oplib.h> #include <asm/prom.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <asm/openpromio.h> #ifdef CONFIG_PCI diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index 0b31658..a9e468c 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -19,7 +19,6 @@ #include <asm/openprom.h> #include <asm/oplib.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/pgtable.h> diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index f672491..a3adfb4 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -129,7 +129,6 @@ #include <linux/interrupt.h> #include <linux/device.h> #include <asm/dma.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/byteorder.h> diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index f66c33b..d4da370 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -47,7 +47,6 @@ #include <asm/dma.h> #include <asm/io.h> -#include <asm/system.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index a06e608..29684c8 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -619,6 +619,7 @@ config SCSI_ARCMSR source "drivers/scsi/megaraid/Kconfig.megaraid" source "drivers/scsi/mpt2sas/Kconfig" +source "drivers/scsi/ufs/Kconfig" config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index ad24e06..8deedea 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -108,6 +108,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/ +obj-$(CONFIG_SCSI_UFSHCD) += ufs/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o obj-$(CONFIG_SCSI_GDTH) += gdth.o diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index bfd618a..374c4ed 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -41,7 +41,6 @@ #include <linux/firmware.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/dma.h> #include <scsi/scsi_cmnd.h> diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index f17c92c..19a3694 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -239,7 +239,6 @@ #include <asm/irq.h> #include <linux/io.h> #include <linux/blkdev.h> -#include <asm/system.h> #include <linux/completion.h> #include <linux/errno.h> #include <linux/string.h> diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index ed119ce..ede91f3 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -42,7 +42,6 @@ #include <linux/slab.h> #include <asm/dma.h> -#include <asm/system.h> #include <asm/io.h> #include "scsi.h" diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c index 1c10b79..a3e6ed3 100644 --- a/drivers/scsi/aha1740.c +++ b/drivers/scsi/aha1740.c @@ -53,7 +53,6 @@ #include <linux/gfp.h> #include <asm/dma.h> -#include <asm/system.h> #include <asm/io.h> #include "scsi.h" diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 7d48700..9328121 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -341,10 +341,10 @@ MODULE_PARM_DESC(aic79xx, " (0/256ms,1/128ms,2/64ms,3/32ms)\n" " slowcrc Turn on the SLOWCRC bit (Rev B only)\n" "\n" -" Sample /etc/modprobe.conf line:\n" -" Enable verbose logging\n" -" Set tag depth on Controller 2/Target 2 to 10 tags\n" -" Shorten the selection timeout to 128ms\n" +" Sample modprobe configuration file:\n" +" # Enable verbose logging\n" +" # Set tag depth on Controller 2/Target 2 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" "\n" " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n" ); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index c6251bb..5a477cd 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -360,10 +360,10 @@ MODULE_PARM_DESC(aic7xxx, " seltime:<int> Selection Timeout\n" " (0/256ms,1/128ms,2/64ms,3/32ms)\n" "\n" -" Sample /etc/modprobe.conf line:\n" -" Toggle EISA/VLB probing\n" -" Set tag depth on Controller 1/Target 1 to 10 tags\n" -" Shorten the selection timeout to 128ms\n" +" Sample modprobe configuration file:\n" +" # Toggle EISA/VLB probing\n" +" # Set tag depth on Controller 1/Target 1 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" "\n" " options aic7xxx 'aic7xxx=probe_eisa_vl.tag_info:{{}.{.10}}.seltime:1'\n" ); diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 2fe9e90..cbde1dc 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -61,7 +61,6 @@ #include <linux/aer.h> #include <asm/dma.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/uaccess.h> #include <scsi/scsi_host.h> #include <scsi/scsi.h> diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index c454e44..b330438 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -138,7 +138,6 @@ #include <linux/stringify.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/ecard.h> #include "../scsi.h" diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c index a750aa7..2a28b4a 100644 --- a/drivers/scsi/arm/arxescsi.c +++ b/drivers/scsi/arm/arxescsi.c @@ -305,7 +305,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id) info->base = base; info->info.scsi.io_base = base + 0x2000; - info->info.scsi.irq = NO_IRQ; + info->info.scsi.irq = 0; info->info.scsi.dma = NO_DMA; info->info.scsi.io_shift = 5; info->info.ifcfg.clockrate = 24; /* MHz */ diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c index a3398fe..c3b99c9 100644 --- a/drivers/scsi/arm/cumana_1.c +++ b/drivers/scsi/arm/cumana_1.c @@ -12,7 +12,6 @@ #include <asm/ecard.h> #include <asm/io.h> -#include <asm/system.h> #include "../scsi.h" #include <scsi/scsi_host.h> diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index e85c40b..6206a66 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -2176,7 +2176,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result) fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble; fn(info, SCpnt, result); - if (info->scsi.irq != NO_IRQ) { + if (info->scsi.irq) { spin_lock_irqsave(&info->host_lock, flags); if (info->scsi.phase == PHASE_IDLE) fas216_kick(info); @@ -2276,7 +2276,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt, * We should only be using this if we don't have an interrupt. * Provide some "incentive" to use the queueing code. */ - BUG_ON(info->scsi.irq != NO_IRQ); + BUG_ON(info->scsi.irq); info->internal_done = 0; fas216_queue_command_lck(SCpnt, fas216_internal_done); diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h index 84b7127..df2e1b3 100644 --- a/drivers/scsi/arm/fas216.h +++ b/drivers/scsi/arm/fas216.h @@ -12,10 +12,6 @@ #ifndef FAS216_H #define FAS216_H -#ifndef NO_IRQ -#define NO_IRQ 255 -#endif - #include <scsi/scsi_eh.h> #include "queue.h" diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c index 849cdf8..d25f944 100644 --- a/drivers/scsi/arm/oak.c +++ b/drivers/scsi/arm/oak.c @@ -13,7 +13,6 @@ #include <asm/ecard.h> #include <asm/io.h> -#include <asm/system.h> #include "../scsi.h" #include <scsi/scsi_host.h> diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index 7e6eca4..68ce085 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -30,7 +30,6 @@ #include <linux/blkdev.h> #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <asm/system.h> #include <asm/io.h> #include <scsi/scsi.h> @@ -2583,7 +2582,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * this than via the PCI device table */ if (ent->device == PCI_DEVICE_ID_ARTOP_AEC7610) { - error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver); + atpdev->chip_ver = pdev->revision; if (atpdev->chip_ver < 2) goto err_eio; } @@ -2602,7 +2601,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent) base_io &= 0xfffffff8; if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) { - error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver); + atpdev->chip_ver = pdev->revision; pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803 host_id = inb(base_io + 0x39); diff --git a/drivers/scsi/bfa/bfa.h b/drivers/scsi/bfa/bfa.h index a796de9..4ad7e36 100644 --- a/drivers/scsi/bfa/bfa.h +++ b/drivers/scsi/bfa/bfa.h @@ -225,9 +225,9 @@ struct bfa_faa_args_s { }; struct bfa_iocfc_s { + bfa_fsm_t fsm; struct bfa_s *bfa; struct bfa_iocfc_cfg_s cfg; - int action; u32 req_cq_pi[BFI_IOC_MAX_CQS]; u32 rsp_cq_ci[BFI_IOC_MAX_CQS]; u8 hw_qid[BFI_IOC_MAX_CQS]; @@ -236,7 +236,9 @@ struct bfa_iocfc_s { struct bfa_cb_qe_s dis_hcb_qe; struct bfa_cb_qe_s en_hcb_qe; struct bfa_cb_qe_s stats_hcb_qe; - bfa_boolean_t cfgdone; + bfa_boolean_t submod_enabled; + bfa_boolean_t cb_reqd; /* Driver call back reqd */ + bfa_status_t op_status; /* Status of bfa iocfc op */ struct bfa_dma_s cfg_info; struct bfi_iocfc_cfg_s *cfginfo; @@ -341,8 +343,6 @@ void bfa_hwct_msix_getvecs(struct bfa_s *bfa, u32 *vecmap, u32 *nvecs, void bfa_hwct_msix_get_rme_range(struct bfa_s *bfa, u32 *start, u32 *end); void bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t *wwns); -wwn_t bfa_iocfc_get_pwwn(struct bfa_s *bfa); -wwn_t bfa_iocfc_get_nwwn(struct bfa_s *bfa); int bfa_iocfc_get_pbc_vports(struct bfa_s *bfa, struct bfi_pbc_vport_s *pbc_vport); @@ -428,7 +428,6 @@ bfa_status_t bfa_iocfc_israttr_set(struct bfa_s *bfa, void bfa_iocfc_enable(struct bfa_s *bfa); void bfa_iocfc_disable(struct bfa_s *bfa); -void bfa_iocfc_cb_dconf_modinit(struct bfa_s *bfa, bfa_status_t status); #define bfa_timer_start(_bfa, _timer, _timercb, _arg, _timeout) \ bfa_timer_begin(&(_bfa)->timer_mod, _timer, _timercb, _arg, _timeout) diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c index 4bd546b..456e576 100644 --- a/drivers/scsi/bfa/bfa_core.c +++ b/drivers/scsi/bfa/bfa_core.c @@ -200,13 +200,431 @@ enum { #define DEF_CFG_NUM_SBOOT_LUNS 16 /* + * IOCFC state machine definitions/declarations + */ +bfa_fsm_state_decl(bfa_iocfc, stopped, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, initing, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, dconf_read, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, init_cfg_wait, + struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, init_cfg_done, + struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, operational, + struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, dconf_write, + struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, stopping, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, enabling, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, cfg_wait, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, disabling, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, disabled, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, failed, struct bfa_iocfc_s, enum iocfc_event); +bfa_fsm_state_decl(bfa_iocfc, init_failed, + struct bfa_iocfc_s, enum iocfc_event); + +/* * forward declaration for IOC FC functions */ +static void bfa_iocfc_start_submod(struct bfa_s *bfa); +static void bfa_iocfc_disable_submod(struct bfa_s *bfa); +static void bfa_iocfc_send_cfg(void *bfa_arg); static void bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status); static void bfa_iocfc_disable_cbfn(void *bfa_arg); static void bfa_iocfc_hbfail_cbfn(void *bfa_arg); static void bfa_iocfc_reset_cbfn(void *bfa_arg); static struct bfa_ioc_cbfn_s bfa_iocfc_cbfn; +static void bfa_iocfc_init_cb(void *bfa_arg, bfa_boolean_t complete); +static void bfa_iocfc_stop_cb(void *bfa_arg, bfa_boolean_t compl); +static void bfa_iocfc_enable_cb(void *bfa_arg, bfa_boolean_t compl); +static void bfa_iocfc_disable_cb(void *bfa_arg, bfa_boolean_t compl); + +static void +bfa_iocfc_sm_stopped_entry(struct bfa_iocfc_s *iocfc) +{ +} + +static void +bfa_iocfc_sm_stopped(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_INIT: + case IOCFC_E_ENABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_initing); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_initing_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_ioc_enable(&iocfc->bfa->ioc); +} + +static void +bfa_iocfc_sm_initing(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_IOC_ENABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_read); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_dconf_read_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_dconf_modinit(iocfc->bfa); +} + +static void +bfa_iocfc_sm_dconf_read(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_DCONF_DONE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_cfg_wait); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_init_cfg_wait_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_iocfc_send_cfg(iocfc->bfa); +} + +static void +bfa_iocfc_sm_init_cfg_wait(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_CFG_DONE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_cfg_done); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_init_cfg_done_entry(struct bfa_iocfc_s *iocfc) +{ + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.init_hcb_qe, + bfa_iocfc_init_cb, iocfc->bfa); +} + +static void +bfa_iocfc_sm_init_cfg_done(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_START: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_operational); + break; + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping); + break; + case IOCFC_E_DISABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_operational_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_fcport_init(iocfc->bfa); + bfa_iocfc_start_submod(iocfc->bfa); +} + +static void +bfa_iocfc_sm_operational(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write); + break; + case IOCFC_E_DISABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_dconf_write_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_dconf_modexit(iocfc->bfa); +} + +static void +bfa_iocfc_sm_dconf_write(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_DCONF_DONE: + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_stopping_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_ioc_disable(&iocfc->bfa->ioc); +} + +static void +bfa_iocfc_sm_stopping(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_IOC_DISABLED: + bfa_isr_disable(iocfc->bfa); + bfa_iocfc_disable_submod(iocfc->bfa); + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopped); + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.stop_hcb_qe, + bfa_iocfc_stop_cb, iocfc->bfa); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_enabling_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_ioc_enable(&iocfc->bfa->ioc); +} + +static void +bfa_iocfc_sm_enabling(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_IOC_ENABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_cfg_wait); + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed); + + if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE) + break; + + iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe, + bfa_iocfc_enable_cb, iocfc->bfa); + iocfc->bfa->iocfc.cb_reqd = BFA_FALSE; + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_cfg_wait_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_iocfc_send_cfg(iocfc->bfa); +} + +static void +bfa_iocfc_sm_cfg_wait(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_CFG_DONE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_operational); + if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE) + break; + + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe, + bfa_iocfc_enable_cb, iocfc->bfa); + iocfc->bfa->iocfc.cb_reqd = BFA_FALSE; + break; + case IOCFC_E_IOC_FAILED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed); + if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE) + break; + + iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.en_hcb_qe, + bfa_iocfc_enable_cb, iocfc->bfa); + iocfc->bfa->iocfc.cb_reqd = BFA_FALSE; + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_disabling_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_ioc_disable(&iocfc->bfa->ioc); +} + +static void +bfa_iocfc_sm_disabling(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_IOC_DISABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabled); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_disabled_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_isr_disable(iocfc->bfa); + bfa_iocfc_disable_submod(iocfc->bfa); + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.dis_hcb_qe, + bfa_iocfc_disable_cb, iocfc->bfa); +} + +static void +bfa_iocfc_sm_disabled(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write); + break; + case IOCFC_E_ENABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_enabling); + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_failed_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_isr_disable(iocfc->bfa); + bfa_iocfc_disable_submod(iocfc->bfa); +} + +static void +bfa_iocfc_sm_failed(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write); + break; + case IOCFC_E_DISABLE: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling); + break; + case IOCFC_E_IOC_ENABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_cfg_wait); + break; + case IOCFC_E_IOC_FAILED: + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} + +static void +bfa_iocfc_sm_init_failed_entry(struct bfa_iocfc_s *iocfc) +{ + bfa_isr_disable(iocfc->bfa); + iocfc->bfa->iocfc.op_status = BFA_STATUS_FAILED; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.init_hcb_qe, + bfa_iocfc_init_cb, iocfc->bfa); +} + +static void +bfa_iocfc_sm_init_failed(struct bfa_iocfc_s *iocfc, enum iocfc_event event) +{ + bfa_trc(iocfc->bfa, event); + + switch (event) { + case IOCFC_E_STOP: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping); + break; + case IOCFC_E_DISABLE: + bfa_ioc_disable(&iocfc->bfa->ioc); + break; + case IOCFC_E_IOC_ENABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_read); + break; + case IOCFC_E_IOC_DISABLED: + bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopped); + iocfc->bfa->iocfc.op_status = BFA_STATUS_OK; + bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.dis_hcb_qe, + bfa_iocfc_disable_cb, iocfc->bfa); + break; + case IOCFC_E_IOC_FAILED: + break; + default: + bfa_sm_fault(iocfc->bfa, event); + break; + } +} /* * BFA Interrupt handling functions @@ -231,16 +649,19 @@ bfa_reqq_resume(struct bfa_s *bfa, int qid) } } -static inline void +bfa_boolean_t bfa_isr_rspq(struct bfa_s *bfa, int qid) { struct bfi_msg_s *m; u32 pi, ci; struct list_head *waitq; + bfa_boolean_t ret; ci = bfa_rspq_ci(bfa, qid); pi = bfa_rspq_pi(bfa, qid); + ret = (ci != pi); + while (ci != pi) { m = bfa_rspq_elem(bfa, qid, ci); WARN_ON(m->mhdr.msg_class >= BFI_MC_MAX); @@ -260,6 +681,8 @@ bfa_isr_rspq(struct bfa_s *bfa, int qid) waitq = bfa_reqq(bfa, qid); if (!list_empty(waitq)) bfa_reqq_resume(bfa, qid); + + return ret; } static inline void @@ -320,6 +743,7 @@ bfa_intx(struct bfa_s *bfa) { u32 intr, qintr; int queue; + bfa_boolean_t rspq_comp = BFA_FALSE; intr = readl(bfa->iocfc.bfa_regs.intr_status); @@ -332,11 +756,12 @@ bfa_intx(struct bfa_s *bfa) */ if (bfa->queue_process) { for (queue = 0; queue < BFI_IOC_MAX_CQS; queue++) - bfa_isr_rspq(bfa, queue); + if (bfa_isr_rspq(bfa, queue)) + rspq_comp = BFA_TRUE; } if (!intr) - return BFA_TRUE; + return (qintr | rspq_comp) ? BFA_TRUE : BFA_FALSE; /* * CPE completion queue interrupt @@ -525,11 +950,9 @@ bfa_iocfc_send_cfg(void *bfa_arg) * Enable interrupt coalescing if it is driver init path * and not ioc disable/enable path. */ - if (!iocfc->cfgdone) + if (bfa_fsm_cmp_state(iocfc, bfa_iocfc_sm_init_cfg_wait)) cfg_info->intr_attr.coalesce = BFA_TRUE; - iocfc->cfgdone = BFA_FALSE; - /* * dma map IOC configuration itself */ @@ -549,8 +972,6 @@ bfa_iocfc_init_mem(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, bfa->bfad = bfad; iocfc->bfa = bfa; - iocfc->action = BFA_IOCFC_ACT_NONE; - iocfc->cfg = *cfg; /* @@ -683,6 +1104,8 @@ bfa_iocfc_start_submod(struct bfa_s *bfa) for (i = 0; hal_mods[i]; i++) hal_mods[i]->start(bfa); + + bfa->iocfc.submod_enabled = BFA_TRUE; } /* @@ -693,8 +1116,13 @@ bfa_iocfc_disable_submod(struct bfa_s *bfa) { int i; + if (bfa->iocfc.submod_enabled == BFA_FALSE) + return; + for (i = 0; hal_mods[i]; i++) hal_mods[i]->iocdisable(bfa); + + bfa->iocfc.submod_enabled = BFA_FALSE; } static void @@ -702,15 +1130,8 @@ bfa_iocfc_init_cb(void *bfa_arg, bfa_boolean_t complete) { struct bfa_s *bfa = bfa_arg; - if (complete) { - if (bfa->iocfc.cfgdone && BFA_DCONF_MOD(bfa)->flashdone) - bfa_cb_init(bfa->bfad, BFA_STATUS_OK); - else - bfa_cb_init(bfa->bfad, BFA_STATUS_FAILED); - } else { - if (bfa->iocfc.cfgdone) - bfa->iocfc.action = BFA_IOCFC_ACT_NONE; - } + if (complete) + bfa_cb_init(bfa->bfad, bfa->iocfc.op_status); } static void @@ -721,8 +1142,6 @@ bfa_iocfc_stop_cb(void *bfa_arg, bfa_boolean_t compl) if (compl) complete(&bfad->comp); - else - bfa->iocfc.action = BFA_IOCFC_ACT_NONE; } static void @@ -794,8 +1213,6 @@ bfa_iocfc_cfgrsp(struct bfa_s *bfa) fwcfg->num_uf_bufs = be16_to_cpu(fwcfg->num_uf_bufs); fwcfg->num_rports = be16_to_cpu(fwcfg->num_rports); - iocfc->cfgdone = BFA_TRUE; - /* * configure queue register offsets as learnt from firmware */ @@ -811,22 +1228,13 @@ bfa_iocfc_cfgrsp(struct bfa_s *bfa) */ bfa_msix_queue_install(bfa); - /* - * Configuration is complete - initialize/start submodules - */ - bfa_fcport_init(bfa); - - if (iocfc->action == BFA_IOCFC_ACT_INIT) { - if (BFA_DCONF_MOD(bfa)->flashdone == BFA_TRUE) - bfa_cb_queue(bfa, &iocfc->init_hcb_qe, - bfa_iocfc_init_cb, bfa); - } else { - if (bfa->iocfc.action == BFA_IOCFC_ACT_ENABLE) - bfa_cb_queue(bfa, &bfa->iocfc.en_hcb_qe, - bfa_iocfc_enable_cb, bfa); - bfa_iocfc_start_submod(bfa); + if (bfa->iocfc.cfgrsp->pbc_cfg.pbc_pwwn != 0) { + bfa->ioc.attr->pwwn = bfa->iocfc.cfgrsp->pbc_cfg.pbc_pwwn; + bfa->ioc.attr->nwwn = bfa->iocfc.cfgrsp->pbc_cfg.pbc_nwwn; + bfa_fsm_send_event(iocfc, IOCFC_E_CFG_DONE); } } + void bfa_iocfc_reset_queues(struct bfa_s *bfa) { @@ -840,6 +1248,23 @@ bfa_iocfc_reset_queues(struct bfa_s *bfa) } } +/* + * Process FAA pwwn msg from fw. + */ +static void +bfa_iocfc_process_faa_addr(struct bfa_s *bfa, struct bfi_faa_addr_msg_s *msg) +{ + struct bfa_iocfc_s *iocfc = &bfa->iocfc; + struct bfi_iocfc_cfgrsp_s *cfgrsp = iocfc->cfgrsp; + + cfgrsp->pbc_cfg.pbc_pwwn = msg->pwwn; + cfgrsp->pbc_cfg.pbc_nwwn = msg->nwwn; + + bfa->ioc.attr->pwwn = msg->pwwn; + bfa->ioc.attr->nwwn = msg->nwwn; + bfa_fsm_send_event(iocfc, IOCFC_E_CFG_DONE); +} + /* Fabric Assigned Address specific functions */ /* @@ -855,84 +1280,13 @@ bfa_faa_validate_request(struct bfa_s *bfa) if ((ioc_type != BFA_IOC_TYPE_FC) || bfa_mfg_is_mezz(card_type)) return BFA_STATUS_FEATURE_NOT_SUPPORTED; } else { - if (!bfa_ioc_is_acq_addr(&bfa->ioc)) - return BFA_STATUS_IOC_NON_OP; + return BFA_STATUS_IOC_NON_OP; } return BFA_STATUS_OK; } bfa_status_t -bfa_faa_enable(struct bfa_s *bfa, bfa_cb_iocfc_t cbfn, void *cbarg) -{ - struct bfi_faa_en_dis_s faa_enable_req; - struct bfa_iocfc_s *iocfc = &bfa->iocfc; - bfa_status_t status; - - iocfc->faa_args.faa_cb.faa_cbfn = cbfn; - iocfc->faa_args.faa_cb.faa_cbarg = cbarg; - - status = bfa_faa_validate_request(bfa); - if (status != BFA_STATUS_OK) - return status; - - if (iocfc->faa_args.busy == BFA_TRUE) - return BFA_STATUS_DEVBUSY; - - if (iocfc->faa_args.faa_state == BFA_FAA_ENABLED) - return BFA_STATUS_FAA_ENABLED; - - if (bfa_fcport_is_trunk_enabled(bfa)) - return BFA_STATUS_ERROR_TRUNK_ENABLED; - - bfa_fcport_cfg_faa(bfa, BFA_FAA_ENABLED); - iocfc->faa_args.busy = BFA_TRUE; - - memset(&faa_enable_req, 0, sizeof(struct bfi_faa_en_dis_s)); - bfi_h2i_set(faa_enable_req.mh, BFI_MC_IOCFC, - BFI_IOCFC_H2I_FAA_ENABLE_REQ, bfa_fn_lpu(bfa)); - - bfa_ioc_mbox_send(&bfa->ioc, &faa_enable_req, - sizeof(struct bfi_faa_en_dis_s)); - - return BFA_STATUS_OK; -} - -bfa_status_t -bfa_faa_disable(struct bfa_s *bfa, bfa_cb_iocfc_t cbfn, - void *cbarg) -{ - struct bfi_faa_en_dis_s faa_disable_req; - struct bfa_iocfc_s *iocfc = &bfa->iocfc; - bfa_status_t status; - - iocfc->faa_args.faa_cb.faa_cbfn = cbfn; - iocfc->faa_args.faa_cb.faa_cbarg = cbarg; - - status = bfa_faa_validate_request(bfa); - if (status != BFA_STATUS_OK) - return status; - - if (iocfc->faa_args.busy == BFA_TRUE) - return BFA_STATUS_DEVBUSY; - - if (iocfc->faa_args.faa_state == BFA_FAA_DISABLED) - return BFA_STATUS_FAA_DISABLED; - - bfa_fcport_cfg_faa(bfa, BFA_FAA_DISABLED); - iocfc->faa_args.busy = BFA_TRUE; - - memset(&faa_disable_req, 0, sizeof(struct bfi_faa_en_dis_s)); - bfi_h2i_set(faa_disable_req.mh, BFI_MC_IOCFC, - BFI_IOCFC_H2I_FAA_DISABLE_REQ, bfa_fn_lpu(bfa)); - - bfa_ioc_mbox_send(&bfa->ioc, &faa_disable_req, - sizeof(struct bfi_faa_en_dis_s)); - - return BFA_STATUS_OK; -} - -bfa_status_t bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr, bfa_cb_iocfc_t cbfn, void *cbarg) { @@ -963,38 +1317,6 @@ bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr, } /* - * FAA enable response - */ -static void -bfa_faa_enable_reply(struct bfa_iocfc_s *iocfc, - struct bfi_faa_en_dis_rsp_s *rsp) -{ - void *cbarg = iocfc->faa_args.faa_cb.faa_cbarg; - bfa_status_t status = rsp->status; - - WARN_ON(!iocfc->faa_args.faa_cb.faa_cbfn); - - iocfc->faa_args.faa_cb.faa_cbfn(cbarg, status); - iocfc->faa_args.busy = BFA_FALSE; -} - -/* - * FAA disable response - */ -static void -bfa_faa_disable_reply(struct bfa_iocfc_s *iocfc, - struct bfi_faa_en_dis_rsp_s *rsp) -{ - void *cbarg = iocfc->faa_args.faa_cb.faa_cbarg; - bfa_status_t status = rsp->status; - - WARN_ON(!iocfc->faa_args.faa_cb.faa_cbfn); - - iocfc->faa_args.faa_cb.faa_cbfn(cbarg, status); - iocfc->faa_args.busy = BFA_FALSE; -} - -/* * FAA query response */ static void @@ -1023,25 +1345,10 @@ bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status) { struct bfa_s *bfa = bfa_arg; - if (status == BFA_STATUS_FAA_ACQ_ADDR) { - bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, - bfa_iocfc_init_cb, bfa); - return; - } - - if (status != BFA_STATUS_OK) { - bfa_isr_disable(bfa); - if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT) - bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, - bfa_iocfc_init_cb, bfa); - else if (bfa->iocfc.action == BFA_IOCFC_ACT_ENABLE) - bfa_cb_queue(bfa, &bfa->iocfc.en_hcb_qe, - bfa_iocfc_enable_cb, bfa); - return; - } - - bfa_iocfc_send_cfg(bfa); - bfa_dconf_modinit(bfa); + if (status == BFA_STATUS_OK) + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_ENABLED); + else + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_FAILED); } /* @@ -1052,17 +1359,7 @@ bfa_iocfc_disable_cbfn(void *bfa_arg) { struct bfa_s *bfa = bfa_arg; - bfa_isr_disable(bfa); - bfa_iocfc_disable_submod(bfa); - - if (bfa->iocfc.action == BFA_IOCFC_ACT_STOP) - bfa_cb_queue(bfa, &bfa->iocfc.stop_hcb_qe, bfa_iocfc_stop_cb, - bfa); - else { - WARN_ON(bfa->iocfc.action != BFA_IOCFC_ACT_DISABLE); - bfa_cb_queue(bfa, &bfa->iocfc.dis_hcb_qe, bfa_iocfc_disable_cb, - bfa); - } + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_DISABLED); } /* @@ -1074,13 +1371,7 @@ bfa_iocfc_hbfail_cbfn(void *bfa_arg) struct bfa_s *bfa = bfa_arg; bfa->queue_process = BFA_FALSE; - - bfa_isr_disable(bfa); - bfa_iocfc_disable_submod(bfa); - - if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT) - bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, bfa_iocfc_init_cb, - bfa); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_IOC_FAILED); } /* @@ -1095,7 +1386,6 @@ bfa_iocfc_reset_cbfn(void *bfa_arg) bfa_isr_enable(bfa); } - /* * Query IOC memory requirement information. */ @@ -1171,6 +1461,12 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, INIT_LIST_HEAD(&bfa->comp_q); for (i = 0; i < BFI_IOC_MAX_CQS; i++) INIT_LIST_HEAD(&bfa->reqq_waitq[i]); + + bfa->iocfc.cb_reqd = BFA_FALSE; + bfa->iocfc.op_status = BFA_STATUS_OK; + bfa->iocfc.submod_enabled = BFA_FALSE; + + bfa_fsm_set_state(&bfa->iocfc, bfa_iocfc_sm_stopped); } /* @@ -1179,8 +1475,7 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, void bfa_iocfc_init(struct bfa_s *bfa) { - bfa->iocfc.action = BFA_IOCFC_ACT_INIT; - bfa_ioc_enable(&bfa->ioc); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_INIT); } /* @@ -1190,8 +1485,7 @@ bfa_iocfc_init(struct bfa_s *bfa) void bfa_iocfc_start(struct bfa_s *bfa) { - if (bfa->iocfc.cfgdone) - bfa_iocfc_start_submod(bfa); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_START); } /* @@ -1201,12 +1495,8 @@ bfa_iocfc_start(struct bfa_s *bfa) void bfa_iocfc_stop(struct bfa_s *bfa) { - bfa->iocfc.action = BFA_IOCFC_ACT_STOP; - bfa->queue_process = BFA_FALSE; - bfa_dconf_modexit(bfa); - if (BFA_DCONF_MOD(bfa)->flashdone == BFA_TRUE) - bfa_ioc_disable(&bfa->ioc); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_STOP); } void @@ -1226,13 +1516,9 @@ bfa_iocfc_isr(void *bfaarg, struct bfi_mbmsg_s *m) case BFI_IOCFC_I2H_UPDATEQ_RSP: iocfc->updateq_cbfn(iocfc->updateq_cbarg, BFA_STATUS_OK); break; - case BFI_IOCFC_I2H_FAA_ENABLE_RSP: - bfa_faa_enable_reply(iocfc, - (struct bfi_faa_en_dis_rsp_s *)msg); - break; - case BFI_IOCFC_I2H_FAA_DISABLE_RSP: - bfa_faa_disable_reply(iocfc, - (struct bfi_faa_en_dis_rsp_s *)msg); + case BFI_IOCFC_I2H_ADDR_MSG: + bfa_iocfc_process_faa_addr(bfa, + (struct bfi_faa_addr_msg_s *)msg); break; case BFI_IOCFC_I2H_FAA_QUERY_RSP: bfa_faa_query_reply(iocfc, (bfi_faa_query_rsp_t *)msg); @@ -1306,8 +1592,8 @@ bfa_iocfc_enable(struct bfa_s *bfa) { bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0, "IOC Enable"); - bfa->iocfc.action = BFA_IOCFC_ACT_ENABLE; - bfa_ioc_enable(&bfa->ioc); + bfa->iocfc.cb_reqd = BFA_TRUE; + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_ENABLE); } void @@ -1315,17 +1601,16 @@ bfa_iocfc_disable(struct bfa_s *bfa) { bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0, "IOC Disable"); - bfa->iocfc.action = BFA_IOCFC_ACT_DISABLE; bfa->queue_process = BFA_FALSE; - bfa_ioc_disable(&bfa->ioc); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_DISABLE); } - bfa_boolean_t bfa_iocfc_is_operational(struct bfa_s *bfa) { - return bfa_ioc_is_operational(&bfa->ioc) && bfa->iocfc.cfgdone; + return bfa_ioc_is_operational(&bfa->ioc) && + bfa_fsm_cmp_state(&bfa->iocfc, bfa_iocfc_sm_operational); } /* @@ -1567,16 +1852,6 @@ bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q) } } -void -bfa_iocfc_cb_dconf_modinit(struct bfa_s *bfa, bfa_status_t status) -{ - if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT) { - if (bfa->iocfc.cfgdone == BFA_TRUE) - bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, - bfa_iocfc_init_cb, bfa); - } -} - /* * Return the list of PCI vendor/device id lists supported by this * BFA instance. diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h index cb07c62..36756ce 100644 --- a/drivers/scsi/bfa/bfa_defs_svc.h +++ b/drivers/scsi/bfa/bfa_defs_svc.h @@ -52,7 +52,7 @@ struct bfa_iocfc_fwcfg_s { u16 num_uf_bufs; /* unsolicited recv buffers */ u8 num_cqs; u8 fw_tick_res; /* FW clock resolution in ms */ - u8 rsvd[2]; + u8 rsvd[6]; }; #pragma pack() diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c index d4f951f..5d2a130 100644 --- a/drivers/scsi/bfa/bfa_fcs_lport.c +++ b/drivers/scsi/bfa/bfa_fcs_lport.c @@ -5717,6 +5717,8 @@ bfa_fcs_vport_free(struct bfa_fcs_vport_s *vport) if (vport_drv->comp_del) complete(vport_drv->comp_del); + else + kfree(vport_drv); bfa_lps_delete(vport->lps); } diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c index 52628d5..fe0463a 100644 --- a/drivers/scsi/bfa/bfa_fcs_rport.c +++ b/drivers/scsi/bfa/bfa_fcs_rport.c @@ -2169,7 +2169,10 @@ bfa_fcs_rport_update(struct bfa_fcs_rport_s *rport, struct fc_logi_s *plogi) * - MAX receive frame size */ rport->cisc = plogi->csp.cisc; - rport->maxfrsize = be16_to_cpu(plogi->class3.rxsz); + if (be16_to_cpu(plogi->class3.rxsz) < be16_to_cpu(plogi->csp.rxsz)) + rport->maxfrsize = be16_to_cpu(plogi->class3.rxsz); + else + rport->maxfrsize = be16_to_cpu(plogi->csp.rxsz); bfa_trc(port->fcs, be16_to_cpu(plogi->csp.bbcred)); bfa_trc(port->fcs, port->fabric->bb_credit); diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c index eca7ab7..14e6284 100644 --- a/drivers/scsi/bfa/bfa_ioc.c +++ b/drivers/scsi/bfa/bfa_ioc.c @@ -88,7 +88,6 @@ static void bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc); static void bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc); static void bfa_ioc_mbox_flush(struct bfa_ioc_s *ioc); static void bfa_ioc_recover(struct bfa_ioc_s *ioc); -static void bfa_ioc_check_attr_wwns(struct bfa_ioc_s *ioc); static void bfa_ioc_event_notify(struct bfa_ioc_s *ioc , enum bfa_ioc_event_e event); static void bfa_ioc_disable_comp(struct bfa_ioc_s *ioc); @@ -97,7 +96,6 @@ static void bfa_ioc_debug_save_ftrc(struct bfa_ioc_s *ioc); static void bfa_ioc_fail_notify(struct bfa_ioc_s *ioc); static void bfa_ioc_pf_fwmismatch(struct bfa_ioc_s *ioc); - /* * IOC state machine definitions/declarations */ @@ -114,7 +112,6 @@ enum ioc_event { IOC_E_HWERROR = 10, /* hardware error interrupt */ IOC_E_TIMEOUT = 11, /* timeout */ IOC_E_HWFAILED = 12, /* PCI mapping failure notice */ - IOC_E_FWRSP_ACQ_ADDR = 13, /* Acquiring address */ }; bfa_fsm_state_decl(bfa_ioc, uninit, struct bfa_ioc_s, enum ioc_event); @@ -127,7 +124,6 @@ bfa_fsm_state_decl(bfa_ioc, fail, struct bfa_ioc_s, enum ioc_event); bfa_fsm_state_decl(bfa_ioc, disabling, struct bfa_ioc_s, enum ioc_event); bfa_fsm_state_decl(bfa_ioc, disabled, struct bfa_ioc_s, enum ioc_event); bfa_fsm_state_decl(bfa_ioc, hwfail, struct bfa_ioc_s, enum ioc_event); -bfa_fsm_state_decl(bfa_ioc, acq_addr, struct bfa_ioc_s, enum ioc_event); static struct bfa_sm_table_s ioc_sm_table[] = { {BFA_SM(bfa_ioc_sm_uninit), BFA_IOC_UNINIT}, @@ -140,7 +136,6 @@ static struct bfa_sm_table_s ioc_sm_table[] = { {BFA_SM(bfa_ioc_sm_disabling), BFA_IOC_DISABLING}, {BFA_SM(bfa_ioc_sm_disabled), BFA_IOC_DISABLED}, {BFA_SM(bfa_ioc_sm_hwfail), BFA_IOC_HWFAIL}, - {BFA_SM(bfa_ioc_sm_acq_addr), BFA_IOC_ACQ_ADDR}, }; /* @@ -371,17 +366,9 @@ bfa_ioc_sm_getattr(struct bfa_ioc_s *ioc, enum ioc_event event) switch (event) { case IOC_E_FWRSP_GETATTR: bfa_ioc_timer_stop(ioc); - bfa_ioc_check_attr_wwns(ioc); - bfa_ioc_hb_monitor(ioc); bfa_fsm_set_state(ioc, bfa_ioc_sm_op); break; - case IOC_E_FWRSP_ACQ_ADDR: - bfa_ioc_timer_stop(ioc); - bfa_ioc_hb_monitor(ioc); - bfa_fsm_set_state(ioc, bfa_ioc_sm_acq_addr); - break; - case IOC_E_PFFAILED: case IOC_E_HWERROR: bfa_ioc_timer_stop(ioc); @@ -406,51 +393,6 @@ bfa_ioc_sm_getattr(struct bfa_ioc_s *ioc, enum ioc_event event) } } -/* - * Acquiring address from fabric (entry function) - */ -static void -bfa_ioc_sm_acq_addr_entry(struct bfa_ioc_s *ioc) -{ -} - -/* - * Acquiring address from the fabric - */ -static void -bfa_ioc_sm_acq_addr(struct bfa_ioc_s *ioc, enum ioc_event event) -{ - bfa_trc(ioc, event); - - switch (event) { - case IOC_E_FWRSP_GETATTR: - bfa_ioc_check_attr_wwns(ioc); - bfa_fsm_set_state(ioc, bfa_ioc_sm_op); - break; - - case IOC_E_PFFAILED: - case IOC_E_HWERROR: - bfa_hb_timer_stop(ioc); - case IOC_E_HBFAIL: - ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE); - bfa_fsm_set_state(ioc, bfa_ioc_sm_fail); - if (event != IOC_E_PFFAILED) - bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_GETATTRFAIL); - break; - - case IOC_E_DISABLE: - bfa_hb_timer_stop(ioc); - bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling); - break; - - case IOC_E_ENABLE: - break; - - default: - bfa_sm_fault(ioc, event); - } -} - static void bfa_ioc_sm_op_entry(struct bfa_ioc_s *ioc) { @@ -458,6 +400,7 @@ bfa_ioc_sm_op_entry(struct bfa_ioc_s *ioc) ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK); bfa_ioc_event_notify(ioc, BFA_IOC_E_ENABLED); + bfa_ioc_hb_monitor(ioc); BFA_LOG(KERN_INFO, bfad, bfa_log_level, "IOC enabled\n"); bfa_ioc_aen_post(ioc, BFA_IOC_AEN_ENABLE); } @@ -738,26 +681,60 @@ static void bfa_iocpf_sm_fwcheck_entry(struct bfa_iocpf_s *iocpf) { struct bfi_ioc_image_hdr_s fwhdr; - u32 fwstate = readl(iocpf->ioc->ioc_regs.ioc_fwstate); + u32 r32, fwstate, pgnum, pgoff, loff = 0; + int i; + + /* + * Spin on init semaphore to serialize. + */ + r32 = readl(iocpf->ioc->ioc_regs.ioc_init_sem_reg); + while (r32 & 0x1) { + udelay(20); + r32 = readl(iocpf->ioc->ioc_regs.ioc_init_sem_reg); + } /* h/w sem init */ - if (fwstate == BFI_IOC_UNINIT) + fwstate = readl(iocpf->ioc->ioc_regs.ioc_fwstate); + if (fwstate == BFI_IOC_UNINIT) { + writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg); goto sem_get; + } bfa_ioc_fwver_get(iocpf->ioc, &fwhdr); - if (swab32(fwhdr.exec) == BFI_FWBOOT_TYPE_NORMAL) + if (swab32(fwhdr.exec) == BFI_FWBOOT_TYPE_NORMAL) { + writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg); goto sem_get; + } + + /* + * Clear fwver hdr + */ + pgnum = PSS_SMEM_PGNUM(iocpf->ioc->ioc_regs.smem_pg0, loff); + pgoff = PSS_SMEM_PGOFF(loff); + writel(pgnum, iocpf->ioc->ioc_regs.host_page_num_fn); + + for (i = 0; i < sizeof(struct bfi_ioc_image_hdr_s) / sizeof(u32); i++) { + bfa_mem_write(iocpf->ioc->ioc_regs.smem_page_start, loff, 0); + loff += sizeof(u32); + } bfa_trc(iocpf->ioc, fwstate); - bfa_trc(iocpf->ioc, fwhdr.exec); + bfa_trc(iocpf->ioc, swab32(fwhdr.exec)); writel(BFI_IOC_UNINIT, iocpf->ioc->ioc_regs.ioc_fwstate); + writel(BFI_IOC_UNINIT, iocpf->ioc->ioc_regs.alt_ioc_fwstate); /* - * Try to lock and then unlock the semaphore. + * Unlock the hw semaphore. Should be here only once per boot. */ readl(iocpf->ioc->ioc_regs.ioc_sem_reg); writel(1, iocpf->ioc->ioc_regs.ioc_sem_reg); + + /* + * unlock init semaphore. + */ + writel(1, iocpf->ioc->ioc_regs.ioc_init_sem_reg); + sem_get: bfa_ioc_hw_sem_get(iocpf->ioc); } @@ -1707,11 +1684,6 @@ bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type, u32 i; u32 asicmode; - /* - * Initialize LMEM first before code download - */ - bfa_ioc_lmem_init(ioc); - bfa_trc(ioc, bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc))); fwimg = bfa_cb_image_get_chunk(bfa_ioc_asic_gen(ioc), chunkno); @@ -1999,6 +1971,12 @@ bfa_ioc_pll_init(struct bfa_ioc_s *ioc) bfa_ioc_pll_init_asic(ioc); ioc->pllinit = BFA_TRUE; + + /* + * Initialize LMEM + */ + bfa_ioc_lmem_init(ioc); + /* * release semaphore. */ @@ -2122,10 +2100,6 @@ bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *m) bfa_ioc_getattr_reply(ioc); break; - case BFI_IOC_I2H_ACQ_ADDR_REPLY: - bfa_fsm_send_event(ioc, IOC_E_FWRSP_ACQ_ADDR); - break; - default: bfa_trc(ioc, msg->mh.msg_id); WARN_ON(1); @@ -2416,15 +2390,6 @@ bfa_ioc_is_disabled(struct bfa_ioc_s *ioc) } /* - * Return TRUE if IOC is in acquiring address state - */ -bfa_boolean_t -bfa_ioc_is_acq_addr(struct bfa_ioc_s *ioc) -{ - return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_acq_addr); -} - -/* * return true if IOC firmware is different. */ bfa_boolean_t @@ -2916,17 +2881,6 @@ bfa_ioc_recover(struct bfa_ioc_s *ioc) bfa_fsm_send_event(ioc, IOC_E_HBFAIL); } -static void -bfa_ioc_check_attr_wwns(struct bfa_ioc_s *ioc) -{ - if (bfa_ioc_get_type(ioc) == BFA_IOC_TYPE_LL) - return; - if (ioc->attr->nwwn == 0) - bfa_ioc_aen_post(ioc, BFA_IOC_AEN_INVALID_NWWN); - if (ioc->attr->pwwn == 0) - bfa_ioc_aen_post(ioc, BFA_IOC_AEN_INVALID_PWWN); -} - /* * BFA IOC PF private functions */ @@ -4495,7 +4449,7 @@ bfa_flash_read_part(struct bfa_flash_s *flash, enum bfa_flash_part_type type, */ #define BFA_DIAG_MEMTEST_TOV 50000 /* memtest timeout in msec */ -#define BFA_DIAG_FWPING_TOV 1000 /* msec */ +#define CT2_BFA_DIAG_MEMTEST_TOV (9*30*1000) /* 4.5 min */ /* IOC event handler */ static void @@ -4772,7 +4726,7 @@ diag_ledtest_send(struct bfa_diag_s *diag, struct bfa_diag_ledtest_s *ledtest) } static void -diag_ledtest_comp(struct bfa_diag_s *diag, struct bfi_diag_ledtest_rsp_s * msg) +diag_ledtest_comp(struct bfa_diag_s *diag, struct bfi_diag_ledtest_rsp_s *msg) { bfa_trc(diag, diag->ledtest.lock); diag->ledtest.lock = BFA_FALSE; @@ -4850,6 +4804,8 @@ bfa_diag_memtest(struct bfa_diag_s *diag, struct bfa_diag_memtest_s *memtest, u32 pattern, struct bfa_diag_memtest_result *result, bfa_cb_diag_t cbfn, void *cbarg) { + u32 memtest_tov; + bfa_trc(diag, pattern); if (!bfa_ioc_adapter_is_disabled(diag->ioc)) @@ -4869,8 +4825,10 @@ bfa_diag_memtest(struct bfa_diag_s *diag, struct bfa_diag_memtest_s *memtest, /* download memtest code and take LPU0 out of reset */ bfa_ioc_boot(diag->ioc, BFI_FWBOOT_TYPE_MEMTEST, BFI_FWBOOT_ENV_OS); + memtest_tov = (bfa_ioc_asic_gen(diag->ioc) == BFI_ASIC_GEN_CT2) ? + CT2_BFA_DIAG_MEMTEST_TOV : BFA_DIAG_MEMTEST_TOV; bfa_timer_begin(diag->ioc->timer_mod, &diag->timer, - bfa_diag_memtest_done, diag, BFA_DIAG_MEMTEST_TOV); + bfa_diag_memtest_done, diag, memtest_tov); diag->timer_active = 1; return BFA_STATUS_OK; } @@ -5641,24 +5599,27 @@ bfa_dconf_sm_uninit(struct bfa_dconf_mod_s *dconf, enum bfa_dconf_event event) case BFA_DCONF_SM_INIT: if (dconf->min_cfg) { bfa_trc(dconf->bfa, dconf->min_cfg); + bfa_fsm_send_event(&dconf->bfa->iocfc, + IOCFC_E_DCONF_DONE); return; } bfa_sm_set_state(dconf, bfa_dconf_sm_flash_read); - dconf->flashdone = BFA_FALSE; - bfa_trc(dconf->bfa, dconf->flashdone); + bfa_timer_start(dconf->bfa, &dconf->timer, + bfa_dconf_timer, dconf, BFA_DCONF_UPDATE_TOV); bfa_status = bfa_flash_read_part(BFA_FLASH(dconf->bfa), BFA_FLASH_PART_DRV, dconf->instance, dconf->dconf, sizeof(struct bfa_dconf_s), 0, bfa_dconf_init_cb, dconf->bfa); if (bfa_status != BFA_STATUS_OK) { + bfa_timer_stop(&dconf->timer); bfa_dconf_init_cb(dconf->bfa, BFA_STATUS_FAILED); bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); return; } break; case BFA_DCONF_SM_EXIT: - dconf->flashdone = BFA_TRUE; + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); case BFA_DCONF_SM_IOCDISABLE: case BFA_DCONF_SM_WR: case BFA_DCONF_SM_FLASH_COMP: @@ -5679,15 +5640,20 @@ bfa_dconf_sm_flash_read(struct bfa_dconf_mod_s *dconf, switch (event) { case BFA_DCONF_SM_FLASH_COMP: + bfa_timer_stop(&dconf->timer); bfa_sm_set_state(dconf, bfa_dconf_sm_ready); break; case BFA_DCONF_SM_TIMEOUT: bfa_sm_set_state(dconf, bfa_dconf_sm_ready); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_IOC_FAILED); break; case BFA_DCONF_SM_EXIT: - dconf->flashdone = BFA_TRUE; - bfa_trc(dconf->bfa, dconf->flashdone); + bfa_timer_stop(&dconf->timer); + bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); + break; case BFA_DCONF_SM_IOCDISABLE: + bfa_timer_stop(&dconf->timer); bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); break; default: @@ -5710,9 +5676,8 @@ bfa_dconf_sm_ready(struct bfa_dconf_mod_s *dconf, enum bfa_dconf_event event) bfa_sm_set_state(dconf, bfa_dconf_sm_dirty); break; case BFA_DCONF_SM_EXIT: - dconf->flashdone = BFA_TRUE; - bfa_trc(dconf->bfa, dconf->flashdone); bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); break; case BFA_DCONF_SM_INIT: case BFA_DCONF_SM_IOCDISABLE: @@ -5774,9 +5739,7 @@ bfa_dconf_sm_final_sync(struct bfa_dconf_mod_s *dconf, bfa_timer_stop(&dconf->timer); case BFA_DCONF_SM_TIMEOUT: bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); - dconf->flashdone = BFA_TRUE; - bfa_trc(dconf->bfa, dconf->flashdone); - bfa_ioc_disable(&dconf->bfa->ioc); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); break; default: bfa_sm_fault(dconf->bfa, event); @@ -5823,8 +5786,8 @@ bfa_dconf_sm_iocdown_dirty(struct bfa_dconf_mod_s *dconf, bfa_sm_set_state(dconf, bfa_dconf_sm_dirty); break; case BFA_DCONF_SM_EXIT: - dconf->flashdone = BFA_TRUE; bfa_sm_set_state(dconf, bfa_dconf_sm_uninit); + bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_DCONF_DONE); break; case BFA_DCONF_SM_IOCDISABLE: break; @@ -5865,11 +5828,6 @@ bfa_dconf_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, if (cfg->drvcfg.min_cfg) { bfa_mem_kva_curp(dconf) += sizeof(struct bfa_dconf_hdr_s); dconf->min_cfg = BFA_TRUE; - /* - * Set the flashdone flag to TRUE explicitly as no flash - * write will happen in min_cfg mode. - */ - dconf->flashdone = BFA_TRUE; } else { dconf->min_cfg = BFA_FALSE; bfa_mem_kva_curp(dconf) += sizeof(struct bfa_dconf_s); @@ -5885,9 +5843,7 @@ bfa_dconf_init_cb(void *arg, bfa_status_t status) struct bfa_s *bfa = arg; struct bfa_dconf_mod_s *dconf = BFA_DCONF_MOD(bfa); - dconf->flashdone = BFA_TRUE; - bfa_trc(bfa, dconf->flashdone); - bfa_iocfc_cb_dconf_modinit(bfa, status); + bfa_sm_send_event(dconf, BFA_DCONF_SM_FLASH_COMP); if (status == BFA_STATUS_OK) { bfa_dconf_read_data_valid(bfa) = BFA_TRUE; if (dconf->dconf->hdr.signature != BFI_DCONF_SIGNATURE) @@ -5895,7 +5851,7 @@ bfa_dconf_init_cb(void *arg, bfa_status_t status) if (dconf->dconf->hdr.version != BFI_DCONF_VERSION) dconf->dconf->hdr.version = BFI_DCONF_VERSION; } - bfa_sm_send_event(dconf, BFA_DCONF_SM_FLASH_COMP); + bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_DCONF_DONE); } void @@ -5977,7 +5933,5 @@ void bfa_dconf_modexit(struct bfa_s *bfa) { struct bfa_dconf_mod_s *dconf = BFA_DCONF_MOD(bfa); - BFA_DCONF_MOD(bfa)->flashdone = BFA_FALSE; - bfa_trc(bfa, BFA_DCONF_MOD(bfa)->flashdone); bfa_sm_send_event(dconf, BFA_DCONF_SM_EXIT); } diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h index 546d46b..1a99d4b 100644 --- a/drivers/scsi/bfa/bfa_ioc.h +++ b/drivers/scsi/bfa/bfa_ioc.h @@ -373,6 +373,22 @@ struct bfa_cb_qe_s { }; /* + * IOCFC state machine definitions/declarations + */ +enum iocfc_event { + IOCFC_E_INIT = 1, /* IOCFC init request */ + IOCFC_E_START = 2, /* IOCFC mod start request */ + IOCFC_E_STOP = 3, /* IOCFC stop request */ + IOCFC_E_ENABLE = 4, /* IOCFC enable request */ + IOCFC_E_DISABLE = 5, /* IOCFC disable request */ + IOCFC_E_IOC_ENABLED = 6, /* IOC enabled message */ + IOCFC_E_IOC_DISABLED = 7, /* IOC disabled message */ + IOCFC_E_IOC_FAILED = 8, /* failure notice by IOC sm */ + IOCFC_E_DCONF_DONE = 9, /* dconf read/write done */ + IOCFC_E_CFG_DONE = 10, /* IOCFC config complete */ +}; + +/* * ASIC block configurtion related */ @@ -706,7 +722,6 @@ struct bfa_dconf_s { struct bfa_dconf_mod_s { bfa_sm_t sm; u8 instance; - bfa_boolean_t flashdone; bfa_boolean_t read_data_valid; bfa_boolean_t min_cfg; struct bfa_timer_s timer; diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c index d1b8f0c..2eb0c6a 100644 --- a/drivers/scsi/bfa/bfa_ioc_ct.c +++ b/drivers/scsi/bfa/bfa_ioc_ct.c @@ -786,17 +786,73 @@ bfa_ioc_ct2_mac_reset(void __iomem *rb) } #define CT2_NFC_MAX_DELAY 1000 +#define CT2_NFC_VER_VALID 0x143 +#define BFA_IOC_PLL_POLL 1000000 + +static bfa_boolean_t +bfa_ioc_ct2_nfc_halted(void __iomem *rb) +{ + u32 r32; + + r32 = readl(rb + CT2_NFC_CSR_SET_REG); + if (r32 & __NFC_CONTROLLER_HALTED) + return BFA_TRUE; + + return BFA_FALSE; +} + +static void +bfa_ioc_ct2_nfc_resume(void __iomem *rb) +{ + u32 r32; + int i; + + writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_CLR_REG); + for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { + r32 = readl(rb + CT2_NFC_CSR_SET_REG); + if (!(r32 & __NFC_CONTROLLER_HALTED)) + return; + udelay(1000); + } + WARN_ON(1); +} + bfa_status_t bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode) { - u32 wgn, r32; - int i; + u32 wgn, r32, nfc_ver, i; - /* - * Initialize PLL if not already done by NFC - */ wgn = readl(rb + CT2_WGN_STATUS); - if (!(wgn & __GLBL_PF_VF_CFG_RDY)) { + nfc_ver = readl(rb + CT2_RSC_GPR15_REG); + + if ((wgn == (__A2T_AHB_LOAD | __WGN_READY)) && + (nfc_ver >= CT2_NFC_VER_VALID)) { + if (bfa_ioc_ct2_nfc_halted(rb)) + bfa_ioc_ct2_nfc_resume(rb); + + writel(__RESET_AND_START_SCLK_LCLK_PLLS, + rb + CT2_CSI_FW_CTL_SET_REG); + + for (i = 0; i < BFA_IOC_PLL_POLL; i++) { + r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); + if (r32 & __RESET_AND_START_SCLK_LCLK_PLLS) + break; + } + + WARN_ON(!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)); + + for (i = 0; i < BFA_IOC_PLL_POLL; i++) { + r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); + if (!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS)) + break; + } + + WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); + udelay(1000); + + r32 = readl(rb + CT2_CSI_FW_CTL_REG); + WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS); + } else { writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_SET_REG); for (i = 0; i < CT2_NFC_MAX_DELAY; i++) { r32 = readl(rb + CT2_NFC_CSR_SET_REG); @@ -804,57 +860,62 @@ bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode) break; udelay(1000); } - } - /* - * Mask the interrupts and clear any - * pending interrupts. - */ - writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK)); - writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK)); - - r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); - if (r32 == 1) { - writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT)); - readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); + bfa_ioc_ct2_mac_reset(rb); + bfa_ioc_ct2_sclk_init(rb); + bfa_ioc_ct2_lclk_init(rb); + + /* + * release soft reset on s_clk & l_clk + */ + r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG); + writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, + (rb + CT2_APP_PLL_SCLK_CTL_REG)); + + /* + * release soft reset on s_clk & l_clk + */ + r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG); + writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, + (rb + CT2_APP_PLL_LCLK_CTL_REG)); } - r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT)); - if (r32 == 1) { - writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT)); - readl((rb + CT2_LPU1_HOSTFN_CMD_STAT)); - } - - bfa_ioc_ct2_mac_reset(rb); - bfa_ioc_ct2_sclk_init(rb); - bfa_ioc_ct2_lclk_init(rb); - - /* - * release soft reset on s_clk & l_clk - */ - r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); - writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET, - (rb + CT2_APP_PLL_SCLK_CTL_REG)); - - /* - * release soft reset on s_clk & l_clk - */ - r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG)); - writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET, - (rb + CT2_APP_PLL_LCLK_CTL_REG)); /* * Announce flash device presence, if flash was corrupted. */ if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) { - r32 = readl((rb + PSS_GPIO_OUT_REG)); + r32 = readl(rb + PSS_GPIO_OUT_REG); writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG)); - r32 = readl((rb + PSS_GPIO_OE_REG)); + r32 = readl(rb + PSS_GPIO_OE_REG); writel(r32 | 1, (rb + PSS_GPIO_OE_REG)); } + /* + * Mask the interrupts and clear any + * pending interrupts. + */ + writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK)); + writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK)); + + /* For first time initialization, no need to clear interrupts */ + r32 = readl(rb + HOST_SEM5_REG); + if (r32 & 0x1) { + r32 = readl(rb + CT2_LPU0_HOSTFN_CMD_STAT); + if (r32 == 1) { + writel(1, rb + CT2_LPU0_HOSTFN_CMD_STAT); + readl((rb + CT2_LPU0_HOSTFN_CMD_STAT)); + } + r32 = readl(rb + CT2_LPU1_HOSTFN_CMD_STAT); + if (r32 == 1) { + writel(1, rb + CT2_LPU1_HOSTFN_CMD_STAT); + readl(rb + CT2_LPU1_HOSTFN_CMD_STAT); + } + } + bfa_ioc_ct2_mem_init(rb); - writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG)); - writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG)); + writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC0_STATE_REG); + writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC1_STATE_REG); + return BFA_STATUS_OK; } diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c index aa8a0ea..2e856e6 100644 --- a/drivers/scsi/bfa/bfa_svc.c +++ b/drivers/scsi/bfa/bfa_svc.c @@ -1280,6 +1280,7 @@ bfa_lps_sm_loginwait(struct bfa_lps_s *lps, enum bfa_lps_event event) switch (event) { case BFA_LPS_SM_RESUME: bfa_sm_set_state(lps, bfa_lps_sm_login); + bfa_lps_send_login(lps); break; case BFA_LPS_SM_OFFLINE: @@ -1578,7 +1579,7 @@ bfa_lps_login_rsp(struct bfa_s *bfa, struct bfi_lps_login_rsp_s *rsp) break; case BFA_STATUS_VPORT_MAX: - if (!rsp->ext_status) + if (rsp->ext_status) bfa_lps_no_res(lps, rsp->ext_status); break; @@ -3084,33 +3085,6 @@ bfa_fcport_set_wwns(struct bfa_fcport_s *fcport) } static void -bfa_fcport_send_txcredit(void *port_cbarg) -{ - - struct bfa_fcport_s *fcport = port_cbarg; - struct bfi_fcport_set_svc_params_req_s *m; - - /* - * check for room in queue to send request now - */ - m = bfa_reqq_next(fcport->bfa, BFA_REQQ_PORT); - if (!m) { - bfa_trc(fcport->bfa, fcport->cfg.tx_bbcredit); - return; - } - - bfi_h2i_set(m->mh, BFI_MC_FCPORT, BFI_FCPORT_H2I_SET_SVC_PARAMS_REQ, - bfa_fn_lpu(fcport->bfa)); - m->tx_bbcredit = cpu_to_be16((u16)fcport->cfg.tx_bbcredit); - m->bb_scn = fcport->cfg.bb_scn; - - /* - * queue I/O message to firmware - */ - bfa_reqq_produce(fcport->bfa, BFA_REQQ_PORT, m->mh); -} - -static void bfa_fcport_qos_stats_swap(struct bfa_qos_stats_s *d, struct bfa_qos_stats_s *s) { @@ -3602,26 +3576,24 @@ bfa_fcport_cfg_speed(struct bfa_s *bfa, enum bfa_port_speed speed) return BFA_STATUS_UNSUPP_SPEED; } - /* For Mezz card, port speed entered needs to be checked */ - if (bfa_mfg_is_mezz(fcport->bfa->ioc.attr->card_type)) { - if (bfa_ioc_get_type(&fcport->bfa->ioc) == BFA_IOC_TYPE_FC) { - /* For CT2, 1G is not supported */ - if ((speed == BFA_PORT_SPEED_1GBPS) && - (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id))) - return BFA_STATUS_UNSUPP_SPEED; + /* Port speed entered needs to be checked */ + if (bfa_ioc_get_type(&fcport->bfa->ioc) == BFA_IOC_TYPE_FC) { + /* For CT2, 1G is not supported */ + if ((speed == BFA_PORT_SPEED_1GBPS) && + (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id))) + return BFA_STATUS_UNSUPP_SPEED; - /* Already checked for Auto Speed and Max Speed supp */ - if (!(speed == BFA_PORT_SPEED_1GBPS || - speed == BFA_PORT_SPEED_2GBPS || - speed == BFA_PORT_SPEED_4GBPS || - speed == BFA_PORT_SPEED_8GBPS || - speed == BFA_PORT_SPEED_16GBPS || - speed == BFA_PORT_SPEED_AUTO)) - return BFA_STATUS_UNSUPP_SPEED; - } else { - if (speed != BFA_PORT_SPEED_10GBPS) - return BFA_STATUS_UNSUPP_SPEED; - } + /* Already checked for Auto Speed and Max Speed supp */ + if (!(speed == BFA_PORT_SPEED_1GBPS || + speed == BFA_PORT_SPEED_2GBPS || + speed == BFA_PORT_SPEED_4GBPS || + speed == BFA_PORT_SPEED_8GBPS || + speed == BFA_PORT_SPEED_16GBPS || + speed == BFA_PORT_SPEED_AUTO)) + return BFA_STATUS_UNSUPP_SPEED; + } else { + if (speed != BFA_PORT_SPEED_10GBPS) + return BFA_STATUS_UNSUPP_SPEED; } fcport->cfg.speed = speed; @@ -3765,7 +3737,6 @@ bfa_fcport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit, u8 bb_scn) fcport->cfg.bb_scn = bb_scn; if (bb_scn) fcport->bbsc_op_state = BFA_TRUE; - bfa_fcport_send_txcredit(fcport); } /* @@ -3825,8 +3796,6 @@ bfa_fcport_get_attr(struct bfa_s *bfa, struct bfa_port_attr_s *attr) attr->port_state = BFA_PORT_ST_IOCDIS; else if (bfa_ioc_fw_mismatch(&fcport->bfa->ioc)) attr->port_state = BFA_PORT_ST_FWMISMATCH; - else if (bfa_ioc_is_acq_addr(&fcport->bfa->ioc)) - attr->port_state = BFA_PORT_ST_ACQ_ADDR; } /* FCoE vlan */ diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h index b52cbb6..f300675 100644 --- a/drivers/scsi/bfa/bfa_svc.h +++ b/drivers/scsi/bfa/bfa_svc.h @@ -663,10 +663,6 @@ void bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg); void bfa_cb_lps_cvl_event(void *bfad, void *uarg); /* FAA specific APIs */ -bfa_status_t bfa_faa_enable(struct bfa_s *bfa, - bfa_cb_iocfc_t cbfn, void *cbarg); -bfa_status_t bfa_faa_disable(struct bfa_s *bfa, - bfa_cb_iocfc_t cbfn, void *cbarg); bfa_status_t bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr, bfa_cb_iocfc_t cbfn, void *cbarg); diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c index 1938fe0..7b1ecd2 100644 --- a/drivers/scsi/bfa/bfad_attr.c +++ b/drivers/scsi/bfa/bfad_attr.c @@ -442,6 +442,43 @@ bfad_im_vport_create(struct fc_vport *fc_vport, bool disable) return status; } +int +bfad_im_issue_fc_host_lip(struct Scsi_Host *shost) +{ + struct bfad_im_port_s *im_port = + (struct bfad_im_port_s *) shost->hostdata[0]; + struct bfad_s *bfad = im_port->bfad; + struct bfad_hal_comp fcomp; + unsigned long flags; + uint32_t status; + + init_completion(&fcomp.comp); + spin_lock_irqsave(&bfad->bfad_lock, flags); + status = bfa_port_disable(&bfad->bfa.modules.port, + bfad_hcb_comp, &fcomp); + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + + if (status != BFA_STATUS_OK) + return -EIO; + + wait_for_completion(&fcomp.comp); + if (fcomp.status != BFA_STATUS_OK) + return -EIO; + + spin_lock_irqsave(&bfad->bfad_lock, flags); + status = bfa_port_enable(&bfad->bfa.modules.port, + bfad_hcb_comp, &fcomp); + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + if (status != BFA_STATUS_OK) + return -EIO; + + wait_for_completion(&fcomp.comp); + if (fcomp.status != BFA_STATUS_OK) + return -EIO; + + return 0; +} + static int bfad_im_vport_delete(struct fc_vport *fc_vport) { @@ -457,8 +494,11 @@ bfad_im_vport_delete(struct fc_vport *fc_vport) unsigned long flags; struct completion fcomp; - if (im_port->flags & BFAD_PORT_DELETE) - goto free_scsi_host; + if (im_port->flags & BFAD_PORT_DELETE) { + bfad_scsi_host_free(bfad, im_port); + list_del(&vport->list_entry); + return 0; + } port = im_port->port; @@ -489,7 +529,6 @@ bfad_im_vport_delete(struct fc_vport *fc_vport) wait_for_completion(vport->comp_del); -free_scsi_host: bfad_scsi_host_free(bfad, im_port); list_del(&vport->list_entry); kfree(vport); @@ -579,7 +618,7 @@ struct fc_function_template bfad_im_fc_function_template = { .show_rport_dev_loss_tmo = 1, .get_rport_dev_loss_tmo = bfad_im_get_rport_loss_tmo, .set_rport_dev_loss_tmo = bfad_im_set_rport_loss_tmo, - + .issue_fc_host_lip = bfad_im_issue_fc_host_lip, .vport_create = bfad_im_vport_create, .vport_delete = bfad_im_vport_delete, .vport_disable = bfad_im_vport_disable, diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 8005c6c..e1f4b10 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -1288,50 +1288,6 @@ out: } int -bfad_iocmd_faa_enable(struct bfad_s *bfad, void *cmd) -{ - struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)cmd; - unsigned long flags; - struct bfad_hal_comp fcomp; - - init_completion(&fcomp.comp); - iocmd->status = BFA_STATUS_OK; - spin_lock_irqsave(&bfad->bfad_lock, flags); - iocmd->status = bfa_faa_enable(&bfad->bfa, bfad_hcb_comp, &fcomp); - spin_unlock_irqrestore(&bfad->bfad_lock, flags); - - if (iocmd->status != BFA_STATUS_OK) - goto out; - - wait_for_completion(&fcomp.comp); - iocmd->status = fcomp.status; -out: - return 0; -} - -int -bfad_iocmd_faa_disable(struct bfad_s *bfad, void *cmd) -{ - struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)cmd; - unsigned long flags; - struct bfad_hal_comp fcomp; - - init_completion(&fcomp.comp); - iocmd->status = BFA_STATUS_OK; - spin_lock_irqsave(&bfad->bfad_lock, flags); - iocmd->status = bfa_faa_disable(&bfad->bfa, bfad_hcb_comp, &fcomp); - spin_unlock_irqrestore(&bfad->bfad_lock, flags); - - if (iocmd->status != BFA_STATUS_OK) - goto out; - - wait_for_completion(&fcomp.comp); - iocmd->status = fcomp.status; -out: - return 0; -} - -int bfad_iocmd_faa_query(struct bfad_s *bfad, void *cmd) { struct bfa_bsg_faa_attr_s *iocmd = (struct bfa_bsg_faa_attr_s *)cmd; @@ -1918,6 +1874,7 @@ bfad_iocmd_debug_fw_core(struct bfad_s *bfad, void *cmd, struct bfa_bsg_debug_s *iocmd = (struct bfa_bsg_debug_s *)cmd; void *iocmd_bufptr; unsigned long flags; + u32 offset; if (bfad_chk_iocmd_sz(payload_len, sizeof(struct bfa_bsg_debug_s), BFA_DEBUG_FW_CORE_CHUNK_SZ) != BFA_STATUS_OK) { @@ -1935,8 +1892,10 @@ bfad_iocmd_debug_fw_core(struct bfad_s *bfad, void *cmd, iocmd_bufptr = (char *)iocmd + sizeof(struct bfa_bsg_debug_s); spin_lock_irqsave(&bfad->bfad_lock, flags); + offset = iocmd->offset; iocmd->status = bfa_ioc_debug_fwcore(&bfad->bfa.ioc, iocmd_bufptr, - (u32 *)&iocmd->offset, &iocmd->bufsz); + &offset, &iocmd->bufsz); + iocmd->offset = offset; spin_unlock_irqrestore(&bfad->bfad_lock, flags); out: return 0; @@ -2633,12 +2592,6 @@ bfad_iocmd_handler(struct bfad_s *bfad, unsigned int cmd, void *iocmd, case IOCMD_FLASH_DISABLE_OPTROM: rc = bfad_iocmd_ablk_optrom(bfad, cmd, iocmd); break; - case IOCMD_FAA_ENABLE: - rc = bfad_iocmd_faa_enable(bfad, iocmd); - break; - case IOCMD_FAA_DISABLE: - rc = bfad_iocmd_faa_disable(bfad, iocmd); - break; case IOCMD_FAA_QUERY: rc = bfad_iocmd_faa_query(bfad, iocmd); break; @@ -2809,9 +2762,16 @@ bfad_im_bsg_vendor_request(struct fc_bsg_job *job) struct bfad_im_port_s *im_port = (struct bfad_im_port_s *) job->shost->hostdata[0]; struct bfad_s *bfad = im_port->bfad; + struct request_queue *request_q = job->req->q; void *payload_kbuf; int rc = -EINVAL; + /* + * Set the BSG device request_queue size to 256 to support + * payloads larger than 512*1024K bytes. + */ + blk_queue_max_segments(request_q, 256); + /* Allocate a temp buffer to hold the passed in user space command */ payload_kbuf = kzalloc(job->request_payload.payload_len, GFP_KERNEL); if (!payload_kbuf) { diff --git a/drivers/scsi/bfa/bfad_bsg.h b/drivers/scsi/bfa/bfad_bsg.h index e859adb..17ad672 100644 --- a/drivers/scsi/bfa/bfad_bsg.h +++ b/drivers/scsi/bfa/bfad_bsg.h @@ -83,8 +83,6 @@ enum { IOCMD_PORT_CFG_MODE, IOCMD_FLASH_ENABLE_OPTROM, IOCMD_FLASH_DISABLE_OPTROM, - IOCMD_FAA_ENABLE, - IOCMD_FAA_DISABLE, IOCMD_FAA_QUERY, IOCMD_CEE_GET_ATTR, IOCMD_CEE_GET_STATS, diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index dc5b9d9..7f74f1d 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -56,7 +56,7 @@ #ifdef BFA_DRIVER_VERSION #define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION #else -#define BFAD_DRIVER_VERSION "3.0.2.2" +#define BFAD_DRIVER_VERSION "3.0.23.0" #endif #define BFAD_PROTO_NAME FCPI_NAME diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h index 0d9f1fb..d4220e1 100644 --- a/drivers/scsi/bfa/bfi_ms.h +++ b/drivers/scsi/bfa/bfi_ms.h @@ -28,17 +28,15 @@ enum bfi_iocfc_h2i_msgs { BFI_IOCFC_H2I_CFG_REQ = 1, BFI_IOCFC_H2I_SET_INTR_REQ = 2, BFI_IOCFC_H2I_UPDATEQ_REQ = 3, - BFI_IOCFC_H2I_FAA_ENABLE_REQ = 4, - BFI_IOCFC_H2I_FAA_DISABLE_REQ = 5, - BFI_IOCFC_H2I_FAA_QUERY_REQ = 6, + BFI_IOCFC_H2I_FAA_QUERY_REQ = 4, + BFI_IOCFC_H2I_ADDR_REQ = 5, }; enum bfi_iocfc_i2h_msgs { BFI_IOCFC_I2H_CFG_REPLY = BFA_I2HM(1), BFI_IOCFC_I2H_UPDATEQ_RSP = BFA_I2HM(3), - BFI_IOCFC_I2H_FAA_ENABLE_RSP = BFA_I2HM(4), - BFI_IOCFC_I2H_FAA_DISABLE_RSP = BFA_I2HM(5), - BFI_IOCFC_I2H_FAA_QUERY_RSP = BFA_I2HM(6), + BFI_IOCFC_I2H_FAA_QUERY_RSP = BFA_I2HM(4), + BFI_IOCFC_I2H_ADDR_MSG = BFA_I2HM(5), }; struct bfi_iocfc_cfg_s { @@ -184,6 +182,13 @@ struct bfi_faa_en_dis_s { struct bfi_mhdr_s mh; /* common msg header */ }; +struct bfi_faa_addr_msg_s { + struct bfi_mhdr_s mh; /* common msg header */ + u8 rsvd[4]; + wwn_t pwwn; /* Fabric acquired PWWN */ + wwn_t nwwn; /* Fabric acquired PWWN */ +}; + /* * BFI_IOCFC_H2I_FAA_QUERY_REQ message */ diff --git a/drivers/scsi/bfa/bfi_reg.h b/drivers/scsi/bfa/bfi_reg.h index d892064..ed5f159 100644 --- a/drivers/scsi/bfa/bfi_reg.h +++ b/drivers/scsi/bfa/bfi_reg.h @@ -335,11 +335,17 @@ enum { #define __PMM_1T_PNDB_P 0x00000002 #define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c #define CT2_WGN_STATUS 0x00014990 +#define __A2T_AHB_LOAD 0x00000800 #define __WGN_READY 0x00000400 #define __GLBL_PF_VF_CFG_RDY 0x00000200 +#define CT2_NFC_CSR_CLR_REG 0x00027420 #define CT2_NFC_CSR_SET_REG 0x00027424 #define __HALT_NFC_CONTROLLER 0x00000002 #define __NFC_CONTROLLER_HALTED 0x00001000 +#define CT2_RSC_GPR15_REG 0x0002765c +#define CT2_CSI_FW_CTL_REG 0x00027080 +#define CT2_CSI_FW_CTL_SET_REG 0x00027088 +#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000 #define CT2_CSI_MAC0_CONTROL_REG 0x000270d0 #define __CSI_MAC_RESET 0x00000010 diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index abd72a0..c1c6a92 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -439,13 +439,13 @@ static int bnx2fc_rcv(struct sk_buff *skb, struct net_device *dev, fr->fr_dev = lport; bg = &bnx2fc_global; - spin_lock_bh(&bg->fcoe_rx_list.lock); + spin_lock(&bg->fcoe_rx_list.lock); __skb_queue_tail(&bg->fcoe_rx_list, skb); if (bg->fcoe_rx_list.qlen == 1) wake_up_process(bg->thread); - spin_unlock_bh(&bg->fcoe_rx_list.lock); + spin_unlock(&bg->fcoe_rx_list.lock); return 0; err: diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c index c2677ba..4b11bb0 100644 --- a/drivers/scsi/dtc.c +++ b/drivers/scsi/dtc.c @@ -72,7 +72,6 @@ #endif -#include <asm/system.h> #include <linux/module.h> #include <linux/signal.h> #include <linux/blkdev.h> diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index ae7d15c..335e851 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1436,7 +1436,7 @@ static int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, goto err; fps = &per_cpu(fcoe_percpu, cpu); - spin_lock_bh(&fps->fcoe_rx_list.lock); + spin_lock(&fps->fcoe_rx_list.lock); if (unlikely(!fps->thread)) { /* * The targeted CPU is not ready, let's target @@ -1447,12 +1447,12 @@ static int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, "ready for incoming skb- using first online " "CPU.\n"); - spin_unlock_bh(&fps->fcoe_rx_list.lock); + spin_unlock(&fps->fcoe_rx_list.lock); cpu = cpumask_first(cpu_online_mask); fps = &per_cpu(fcoe_percpu, cpu); - spin_lock_bh(&fps->fcoe_rx_list.lock); + spin_lock(&fps->fcoe_rx_list.lock); if (!fps->thread) { - spin_unlock_bh(&fps->fcoe_rx_list.lock); + spin_unlock(&fps->fcoe_rx_list.lock); goto err; } } @@ -1463,24 +1463,17 @@ static int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, * so we're free to queue skbs into it's queue. */ - /* If this is a SCSI-FCP frame, and this is already executing on the - * correct CPU, and the queue for this CPU is empty, then go ahead - * and process the frame directly in the softirq context. - * This lets us process completions without context switching from the - * NET_RX softirq, to our receive processing thread, and then back to - * BLOCK softirq context. + /* + * Note: We used to have a set of conditions under which we would + * call fcoe_recv_frame directly, rather than queuing to the rx list + * as it could save a few cycles, but doing so is prohibited, as + * fcoe_recv_frame has several paths that may sleep, which is forbidden + * in softirq context. */ - if (fh->fh_type == FC_TYPE_FCP && - cpu == smp_processor_id() && - skb_queue_empty(&fps->fcoe_rx_list)) { - spin_unlock_bh(&fps->fcoe_rx_list.lock); - fcoe_recv_frame(skb); - } else { - __skb_queue_tail(&fps->fcoe_rx_list, skb); - if (fps->fcoe_rx_list.qlen == 1) - wake_up_process(fps->thread); - spin_unlock_bh(&fps->fcoe_rx_list.lock); - } + __skb_queue_tail(&fps->fcoe_rx_list, skb); + if (fps->thread->state == TASK_INTERRUPTIBLE) + wake_up_process(fps->thread); + spin_unlock(&fps->fcoe_rx_list.lock); return 0; err: @@ -1797,23 +1790,29 @@ static int fcoe_percpu_receive_thread(void *arg) { struct fcoe_percpu_s *p = arg; struct sk_buff *skb; + struct sk_buff_head tmp; + + skb_queue_head_init(&tmp); set_user_nice(current, -20); while (!kthread_should_stop()) { spin_lock_bh(&p->fcoe_rx_list.lock); - while ((skb = __skb_dequeue(&p->fcoe_rx_list)) == NULL) { + skb_queue_splice_init(&p->fcoe_rx_list, &tmp); + spin_unlock_bh(&p->fcoe_rx_list.lock); + + while ((skb = __skb_dequeue(&tmp)) != NULL) + fcoe_recv_frame(skb); + + spin_lock_bh(&p->fcoe_rx_list.lock); + if (!skb_queue_len(&p->fcoe_rx_list)) { set_current_state(TASK_INTERRUPTIBLE); spin_unlock_bh(&p->fcoe_rx_list.lock); schedule(); set_current_state(TASK_RUNNING); - if (kthread_should_stop()) - return 0; - spin_lock_bh(&p->fcoe_rx_list.lock); - } - spin_unlock_bh(&p->fcoe_rx_list.lock); - fcoe_recv_frame(skb); + } else + spin_unlock_bh(&p->fcoe_rx_list.lock); } return 0; } @@ -2187,8 +2186,12 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) /* start FIP Discovery and FLOGI */ lport->boot_time = jiffies; fc_fabric_login(lport); - if (!fcoe_link_ok(lport)) + if (!fcoe_link_ok(lport)) { + rtnl_unlock(); fcoe_ctlr_link_up(&fcoe->ctlr); + mutex_unlock(&fcoe_config_mutex); + return rc; + } out_nodev: rtnl_unlock(); @@ -2261,31 +2264,14 @@ static int fcoe_link_ok(struct fc_lport *lport) static void fcoe_percpu_clean(struct fc_lport *lport) { struct fcoe_percpu_s *pp; - struct fcoe_rcv_info *fr; - struct sk_buff_head *list; - struct sk_buff *skb, *next; - struct sk_buff *head; + struct sk_buff *skb; unsigned int cpu; for_each_possible_cpu(cpu) { pp = &per_cpu(fcoe_percpu, cpu); - spin_lock_bh(&pp->fcoe_rx_list.lock); - list = &pp->fcoe_rx_list; - head = list->next; - for (skb = head; skb != (struct sk_buff *)list; - skb = next) { - next = skb->next; - fr = fcoe_dev_from_skb(skb); - if (fr->fr_dev == lport) { - __skb_unlink(skb, list); - kfree_skb(skb); - } - } - if (!pp->thread || !cpu_online(cpu)) { - spin_unlock_bh(&pp->fcoe_rx_list.lock); + if (!pp->thread || !cpu_online(cpu)) continue; - } skb = dev_alloc_skb(0); if (!skb) { @@ -2294,6 +2280,7 @@ static void fcoe_percpu_clean(struct fc_lport *lport) } skb->destructor = fcoe_percpu_flush_done; + spin_lock_bh(&pp->fcoe_rx_list.lock); __skb_queue_tail(&pp->fcoe_rx_list, skb); if (pp->fcoe_rx_list.qlen == 1) wake_up_process(pp->thread); diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index e7522dc..249a106 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -242,7 +242,7 @@ static void fcoe_ctlr_announce(struct fcoe_ctlr *fip) printk(KERN_INFO "libfcoe: host%d: FIP selected " "Fibre-Channel Forwarder MAC %pM\n", fip->lp->host->host_no, sel->fcf_mac); - memcpy(fip->dest_addr, sel->fcf_mac, ETH_ALEN); + memcpy(fip->dest_addr, sel->fcoe_mac, ETH_ALEN); fip->map_dest = 0; } unlock: @@ -824,6 +824,7 @@ static int fcoe_ctlr_parse_adv(struct fcoe_ctlr *fip, memcpy(fcf->fcf_mac, ((struct fip_mac_desc *)desc)->fd_mac, ETH_ALEN); + memcpy(fcf->fcoe_mac, fcf->fcf_mac, ETH_ALEN); if (!is_valid_ether_addr(fcf->fcf_mac)) { LIBFCOE_FIP_DBG(fip, "Invalid MAC addr %pM in FIP adv\n", @@ -1013,6 +1014,7 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb) struct fip_desc *desc; struct fip_encaps *els; struct fcoe_dev_stats *stats; + struct fcoe_fcf *sel; enum fip_desc_type els_dtype = 0; u8 els_op; u8 sub; @@ -1040,7 +1042,8 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb) goto drop; /* Drop ELS if there are duplicate critical descriptors */ if (desc->fip_dtype < 32) { - if (desc_mask & 1U << desc->fip_dtype) { + if ((desc->fip_dtype != FIP_DT_MAC) && + (desc_mask & 1U << desc->fip_dtype)) { LIBFCOE_FIP_DBG(fip, "Duplicate Critical " "Descriptors in FIP ELS\n"); goto drop; @@ -1049,17 +1052,32 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb) } switch (desc->fip_dtype) { case FIP_DT_MAC: + sel = fip->sel_fcf; if (desc_cnt == 1) { LIBFCOE_FIP_DBG(fip, "FIP descriptors " "received out of order\n"); goto drop; } + /* + * Some switch implementations send two MAC descriptors, + * with first MAC(granted_mac) being the FPMA, and the + * second one(fcoe_mac) is used as destination address + * for sending/receiving FCoE packets. FIP traffic is + * sent using fip_mac. For regular switches, both + * fip_mac and fcoe_mac would be the same. + */ + if (desc_cnt == 2) + memcpy(granted_mac, + ((struct fip_mac_desc *)desc)->fd_mac, + ETH_ALEN); if (dlen != sizeof(struct fip_mac_desc)) goto len_err; - memcpy(granted_mac, - ((struct fip_mac_desc *)desc)->fd_mac, - ETH_ALEN); + + if ((desc_cnt == 3) && (sel)) + memcpy(sel->fcoe_mac, + ((struct fip_mac_desc *)desc)->fd_mac, + ETH_ALEN); break; case FIP_DT_FLOGI: case FIP_DT_FDISC: @@ -1273,11 +1291,6 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, * No Vx_Port description. Clear all NPIV ports, * followed by physical port */ - mutex_lock(&lport->lp_mutex); - list_for_each_entry(vn_port, &lport->vports, list) - fc_lport_reset(vn_port); - mutex_unlock(&lport->lp_mutex); - mutex_lock(&fip->ctlr_mutex); per_cpu_ptr(lport->dev_stats, get_cpu())->VLinkFailureCount++; @@ -1285,6 +1298,11 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, fcoe_ctlr_reset(fip); mutex_unlock(&fip->ctlr_mutex); + mutex_lock(&lport->lp_mutex); + list_for_each_entry(vn_port, &lport->vports, list) + fc_lport_reset(vn_port); + mutex_unlock(&lport->lp_mutex); + fc_lport_reset(fip->lp); fcoe_ctlr_solicit(fip, NULL); } else { diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c index a2c6135..53bfcaa 100644 --- a/drivers/scsi/fd_mcs.c +++ b/drivers/scsi/fd_mcs.c @@ -93,7 +93,6 @@ #include <linux/mca-legacy.h> #include <asm/io.h> -#include <asm/system.h> #include "scsi.h" #include <scsi/scsi_host.h> diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c index 643f6d5..1a2a1e5 100644 --- a/drivers/scsi/fdomain.c +++ b/drivers/scsi/fdomain.c @@ -282,7 +282,6 @@ #include <linux/slab.h> #include <scsi/scsicam.h> -#include <asm/system.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 81182ba..1a5954f 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -100,7 +100,6 @@ #undef NCR5380_STAT_LIMIT #endif -#include <asm/system.h> #include <asm/io.h> #include <linux/signal.h> #include <linux/blkdev.h> diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index d42ec92..5d72274 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -129,7 +129,6 @@ #include <linux/reboot.h> #include <asm/dma.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/uaccess.h> #include <linux/spinlock.h> diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c index 67fc8ff..cd09132 100644 --- a/drivers/scsi/ibmmca.c +++ b/drivers/scsi/ibmmca.c @@ -32,7 +32,6 @@ #include <linux/spinlock.h> #include <linux/init.h> -#include <asm/system.h> #include <asm/io.h> #include "scsi.h" diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index bdfa223..134a0ae 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -4890,11 +4890,8 @@ static struct vio_driver ibmvfc_driver = { .probe = ibmvfc_probe, .remove = ibmvfc_remove, .get_desired_dma = ibmvfc_get_desired_dma, - .driver = { - .name = IBMVFC_NAME, - .owner = THIS_MODULE, - .pm = &ibmvfc_pm_ops, - } + .name = IBMVFC_NAME, + .pm = &ibmvfc_pm_ops, }; static struct fc_function_template ibmvfc_transport_functions = { diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index e984951..3a6c474 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -2061,11 +2061,8 @@ static struct vio_driver ibmvscsi_driver = { .probe = ibmvscsi_probe, .remove = ibmvscsi_remove, .get_desired_dma = ibmvscsi_get_desired_dma, - .driver = { - .name = "ibmvscsi", - .owner = THIS_MODULE, - .pm = &ibmvscsi_pm_ops, - } + .name = "ibmvscsi", + .pm = &ibmvscsi_pm_ops, }; static struct srp_function_template ibmvscsi_transport_functions = { diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c index 2256bab..aa7ed81 100644 --- a/drivers/scsi/ibmvscsi/ibmvstgt.c +++ b/drivers/scsi/ibmvscsi/ibmvstgt.c @@ -918,10 +918,7 @@ static struct vio_driver ibmvstgt_driver = { .id_table = ibmvstgt_device_table, .probe = ibmvstgt_probe, .remove = ibmvstgt_remove, - .driver = { - .name = "ibmvscsis", - .owner = THIS_MODULE, - } + .name = "ibmvscsis", }; static int get_system_info(void) diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c index 112f1be..deb5b6d 100644 --- a/drivers/scsi/in2000.c +++ b/drivers/scsi/in2000.c @@ -123,7 +123,6 @@ #include <linux/stat.h> #include <asm/io.h> -#include <asm/system.h> #include "scsi.h" #include <scsi/scsi_host.h> diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index cdfe5a1..e002cd4 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -104,7 +104,9 @@ static DEFINE_SPINLOCK(ipr_driver_lock); static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { { /* Gemstone, Citrine, Obsidian, and Obsidian-E */ .mailbox = 0x0042C, + .max_cmds = 100, .cache_line_size = 0x20, + .clear_isr = 1, { .set_interrupt_mask_reg = 0x0022C, .clr_interrupt_mask_reg = 0x00230, @@ -126,7 +128,9 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { }, { /* Snipe and Scamp */ .mailbox = 0x0052C, + .max_cmds = 100, .cache_line_size = 0x20, + .clear_isr = 1, { .set_interrupt_mask_reg = 0x00288, .clr_interrupt_mask_reg = 0x0028C, @@ -148,7 +152,9 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { }, { /* CRoC */ .mailbox = 0x00044, + .max_cmds = 1000, .cache_line_size = 0x20, + .clear_isr = 0, { .set_interrupt_mask_reg = 0x00010, .clr_interrupt_mask_reg = 0x00018, @@ -847,8 +853,6 @@ static void ipr_do_req(struct ipr_cmnd *ipr_cmd, ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0); - mb(); - ipr_send_command(ipr_cmd); } @@ -982,8 +986,6 @@ static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type, ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR); - mb(); - ipr_send_command(ipr_cmd); } else { list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q); @@ -4339,8 +4341,7 @@ static struct ipr_resource_entry *ipr_find_starget(struct scsi_target *starget) list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { if ((res->bus == starget->channel) && - (res->target == starget->id) && - (res->lun == 0)) { + (res->target == starget->id)) { return res; } } @@ -4414,12 +4415,14 @@ static void ipr_target_destroy(struct scsi_target *starget) struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata; if (ioa_cfg->sis64) { - if (starget->channel == IPR_ARRAY_VIRTUAL_BUS) - clear_bit(starget->id, ioa_cfg->array_ids); - else if (starget->channel == IPR_VSET_VIRTUAL_BUS) - clear_bit(starget->id, ioa_cfg->vset_ids); - else if (starget->channel == 0) - clear_bit(starget->id, ioa_cfg->target_ids); + if (!ipr_find_starget(starget)) { + if (starget->channel == IPR_ARRAY_VIRTUAL_BUS) + clear_bit(starget->id, ioa_cfg->array_ids); + else if (starget->channel == IPR_VSET_VIRTUAL_BUS) + clear_bit(starget->id, ioa_cfg->vset_ids); + else if (starget->channel == 0) + clear_bit(starget->id, ioa_cfg->target_ids); + } } if (sata_port) { @@ -5048,12 +5051,14 @@ static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg, del_timer(&ioa_cfg->reset_cmd->timer); ipr_reset_ioa_job(ioa_cfg->reset_cmd); } else if ((int_reg & IPR_PCII_HRRQ_UPDATED) == int_reg) { - if (ipr_debug && printk_ratelimit()) - dev_err(&ioa_cfg->pdev->dev, - "Spurious interrupt detected. 0x%08X\n", int_reg); - writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32); - int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); - return IRQ_NONE; + if (ioa_cfg->clear_isr) { + if (ipr_debug && printk_ratelimit()) + dev_err(&ioa_cfg->pdev->dev, + "Spurious interrupt detected. 0x%08X\n", int_reg); + writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32); + int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); + return IRQ_NONE; + } } else { if (int_reg & IPR_PCII_IOA_UNIT_CHECKED) ioa_cfg->ioa_unit_checked = 1; @@ -5153,6 +5158,9 @@ static irqreturn_t ipr_isr(int irq, void *devp) } } + if (ipr_cmd && !ioa_cfg->clear_isr) + break; + if (ipr_cmd != NULL) { /* Clear the PCI interrupt */ num_hrrq = 0; @@ -5854,14 +5862,12 @@ static int ipr_queuecommand_lck(struct scsi_cmnd *scsi_cmd, rc = ipr_build_ioadl(ioa_cfg, ipr_cmd); } - if (likely(rc == 0)) { - mb(); - ipr_send_command(ipr_cmd); - } else { - list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q); - return SCSI_MLQUEUE_HOST_BUSY; + if (unlikely(rc != 0)) { + list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q); + return SCSI_MLQUEUE_HOST_BUSY; } + ipr_send_command(ipr_cmd); return 0; } @@ -6239,8 +6245,6 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc) return AC_ERR_INVALID; } - mb(); - ipr_send_command(ipr_cmd); return 0; @@ -8277,6 +8281,10 @@ static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) if (ioa_cfg->ipr_cmd_pool) pci_pool_destroy (ioa_cfg->ipr_cmd_pool); + kfree(ioa_cfg->ipr_cmnd_list); + kfree(ioa_cfg->ipr_cmnd_list_dma); + ioa_cfg->ipr_cmnd_list = NULL; + ioa_cfg->ipr_cmnd_list_dma = NULL; ioa_cfg->ipr_cmd_pool = NULL; } @@ -8352,11 +8360,19 @@ static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) int i; ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev, - sizeof(struct ipr_cmnd), 16, 0); + sizeof(struct ipr_cmnd), 512, 0); if (!ioa_cfg->ipr_cmd_pool) return -ENOMEM; + ioa_cfg->ipr_cmnd_list = kcalloc(IPR_NUM_CMD_BLKS, sizeof(struct ipr_cmnd *), GFP_KERNEL); + ioa_cfg->ipr_cmnd_list_dma = kcalloc(IPR_NUM_CMD_BLKS, sizeof(dma_addr_t), GFP_KERNEL); + + if (!ioa_cfg->ipr_cmnd_list || !ioa_cfg->ipr_cmnd_list_dma) { + ipr_free_cmd_blks(ioa_cfg); + return -ENOMEM; + } + for (i = 0; i < IPR_NUM_CMD_BLKS; i++) { ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr); @@ -8584,6 +8600,7 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg, host->max_channel = IPR_MAX_BUS_TO_SCAN; host->unique_id = host->host_no; host->max_cmd_len = IPR_MAX_CDB_LEN; + host->can_queue = ioa_cfg->max_cmds; pci_set_drvdata(pdev, ioa_cfg); p = &ioa_cfg->chip_cfg->regs; @@ -8768,6 +8785,8 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev, /* set SIS 32 or SIS 64 */ ioa_cfg->sis64 = ioa_cfg->ipr_chip->sis_type == IPR_SIS64 ? 1 : 0; ioa_cfg->chip_cfg = ioa_cfg->ipr_chip->cfg; + ioa_cfg->clear_isr = ioa_cfg->chip_cfg->clear_isr; + ioa_cfg->max_cmds = ioa_cfg->chip_cfg->max_cmds; if (ipr_transop_timeout) ioa_cfg->transop_timeout = ipr_transop_timeout; diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index f94eaee..153b8bd 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -38,8 +38,8 @@ /* * Literals */ -#define IPR_DRIVER_VERSION "2.5.2" -#define IPR_DRIVER_DATE "(April 27, 2011)" +#define IPR_DRIVER_VERSION "2.5.3" +#define IPR_DRIVER_DATE "(March 10, 2012)" /* * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding @@ -53,7 +53,7 @@ * IPR_NUM_BASE_CMD_BLKS: This defines the maximum number of * ops the mid-layer can send to the adapter. */ -#define IPR_NUM_BASE_CMD_BLKS 100 +#define IPR_NUM_BASE_CMD_BLKS (ioa_cfg->max_cmds) #define PCI_DEVICE_ID_IBM_OBSIDIAN_E 0x0339 @@ -153,7 +153,7 @@ #define IPR_NUM_INTERNAL_CMD_BLKS (IPR_NUM_HCAMS + \ ((IPR_NUM_RESET_RELOAD_RETRIES + 1) * 2) + 4) -#define IPR_MAX_COMMANDS IPR_NUM_BASE_CMD_BLKS +#define IPR_MAX_COMMANDS 100 #define IPR_NUM_CMD_BLKS (IPR_NUM_BASE_CMD_BLKS + \ IPR_NUM_INTERNAL_CMD_BLKS) @@ -1305,7 +1305,9 @@ struct ipr_interrupts { struct ipr_chip_cfg_t { u32 mailbox; + u16 max_cmds; u8 cache_line_size; + u8 clear_isr; struct ipr_interrupt_offsets regs; }; @@ -1388,6 +1390,7 @@ struct ipr_ioa_cfg { u8 sis64:1; u8 dump_timeout:1; u8 cfg_locked:1; + u8 clear_isr:1; u8 revid; @@ -1501,8 +1504,9 @@ struct ipr_ioa_cfg { struct ata_host ata_host; char ipr_cmd_label[8]; #define IPR_CMD_LABEL "ipr_cmd" - struct ipr_cmnd *ipr_cmnd_list[IPR_NUM_CMD_BLKS]; - dma_addr_t ipr_cmnd_list_dma[IPR_NUM_CMD_BLKS]; + u32 max_cmds; + struct ipr_cmnd **ipr_cmnd_list; + dma_addr_t *ipr_cmnd_list_dma; }; /* struct ipr_ioa_cfg */ struct ipr_cmnd { diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 630291f..aceffad 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -2263,7 +2263,18 @@ struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lport, mp->class = class; /* adjust em exch xid range for offload */ mp->min_xid = min_xid; - mp->max_xid = max_xid; + + /* reduce range so per cpu pool fits into PCPU_MIN_UNIT_SIZE pool */ + pool_exch_range = (PCPU_MIN_UNIT_SIZE - sizeof(*pool)) / + sizeof(struct fc_exch *); + if ((max_xid - min_xid + 1) / (fc_cpu_mask + 1) > pool_exch_range) { + mp->max_xid = pool_exch_range * (fc_cpu_mask + 1) + + min_xid - 1; + } else { + mp->max_xid = max_xid; + pool_exch_range = (mp->max_xid - mp->min_xid + 1) / + (fc_cpu_mask + 1); + } mp->ep_pool = mempool_create_slab_pool(2, fc_em_cachep); if (!mp->ep_pool) @@ -2274,7 +2285,6 @@ struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lport, * divided across all cpus. The exch pointers array memory is * allocated for exch range per pool. */ - pool_exch_range = (mp->max_xid - mp->min_xid + 1) / (fc_cpu_mask + 1); mp->pool_max_index = pool_exch_range - 1; /* diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index bd5d31d..ef9560d 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1743,8 +1743,16 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; if (mfs >= FC_SP_MIN_MAX_PAYLOAD && - mfs < lport->mfs) + mfs <= lport->mfs) { lport->mfs = mfs; + fc_host_maxframe_size(lport->host) = mfs; + } else { + FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, " + "lport->mfs:%hu\n", mfs, lport->mfs); + fc_lport_error(lport, fp); + goto err; + } + csp_flags = ntohs(flp->fl_csp.sp_features); r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov); e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov); diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile index 88928f0..fe5d396 100644 --- a/drivers/scsi/lpfc/Makefile +++ b/drivers/scsi/lpfc/Makefile @@ -1,7 +1,7 @@ #/******************************************************************* # * This file is part of the Emulex Linux Device Driver for * # * Fibre Channel Host Bus Adapters. * -# * Copyright (C) 2004-2011 Emulex. All rights reserved. * +# * Copyright (C) 2004-2012 Emulex. All rights reserved. * # * EMULEX and SLI are trademarks of Emulex. * # * www.emulex.com * # * * @@ -22,6 +22,8 @@ ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage ccflags-$(GCOV) += -O0 +ccflags-y += -Werror + obj-$(CONFIG_SCSI_LPFC) := lpfc.o lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o lpfc_hbadisc.o \ diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 5fc044f..3a1ffdd 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -840,6 +840,8 @@ struct lpfc_hba { struct dentry *debug_dumpData; /* BlockGuard BPL */ struct dentry *debug_dumpDif; /* BlockGuard BPL */ struct dentry *debug_InjErrLBA; /* LBA to inject errors at */ + struct dentry *debug_InjErrNPortID; /* NPortID to inject errors at */ + struct dentry *debug_InjErrWWPN; /* WWPN to inject errors at */ struct dentry *debug_writeGuard; /* inject write guard_tag errors */ struct dentry *debug_writeApp; /* inject write app_tag errors */ struct dentry *debug_writeRef; /* inject write ref_tag errors */ @@ -854,6 +856,8 @@ struct lpfc_hba { uint32_t lpfc_injerr_rgrd_cnt; uint32_t lpfc_injerr_rapp_cnt; uint32_t lpfc_injerr_rref_cnt; + uint32_t lpfc_injerr_nportid; + struct lpfc_name lpfc_injerr_wwpn; sector_t lpfc_injerr_lba; #define LPFC_INJERR_LBA_OFF (sector_t)(-1) @@ -908,6 +912,8 @@ struct lpfc_hba { atomic_t fast_event_count; uint32_t fcoe_eventtag; uint32_t fcoe_eventtag_at_fcf_scan; + uint32_t fcoe_cvl_eventtag; + uint32_t fcoe_cvl_eventtag_attn; struct lpfc_fcf fcf; uint8_t fc_map[3]; uint8_t valid_vlan; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 296ad5b..5eb2bc1 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -2575,7 +2575,7 @@ LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff, # lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters # objects that have been registered with the nameserver after login. */ -LPFC_VPORT_ATTR_R(enable_da_id, 0, 0, 1, +LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1, "Deregister nameserver objects before LOGO"); /* diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 22e17be..5bdf2ee 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2007-2011 Emulex. All rights reserved. * + * Copyright (C) 2007-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -1010,25 +1010,35 @@ lpfc_debugfs_dif_err_read(struct file *file, char __user *buf, { struct dentry *dent = file->f_dentry; struct lpfc_hba *phba = file->private_data; - char cbuf[16]; + char cbuf[32]; + uint64_t tmp = 0; int cnt = 0; if (dent == phba->debug_writeGuard) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wgrd_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wgrd_cnt); else if (dent == phba->debug_writeApp) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wapp_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wapp_cnt); else if (dent == phba->debug_writeRef) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wref_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wref_cnt); else if (dent == phba->debug_readGuard) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rgrd_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rgrd_cnt); else if (dent == phba->debug_readApp) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rapp_cnt); + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rapp_cnt); else if (dent == phba->debug_readRef) - cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rref_cnt); - else if (dent == phba->debug_InjErrLBA) - cnt = snprintf(cbuf, 16, "0x%lx\n", - (unsigned long) phba->lpfc_injerr_lba); - else + cnt = snprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rref_cnt); + else if (dent == phba->debug_InjErrNPortID) + cnt = snprintf(cbuf, 32, "0x%06x\n", phba->lpfc_injerr_nportid); + else if (dent == phba->debug_InjErrWWPN) { + memcpy(&tmp, &phba->lpfc_injerr_wwpn, sizeof(struct lpfc_name)); + tmp = cpu_to_be64(tmp); + cnt = snprintf(cbuf, 32, "0x%016llx\n", tmp); + } else if (dent == phba->debug_InjErrLBA) { + if (phba->lpfc_injerr_lba == (sector_t)(-1)) + cnt = snprintf(cbuf, 32, "off\n"); + else + cnt = snprintf(cbuf, 32, "0x%llx\n", + (uint64_t) phba->lpfc_injerr_lba); + } else lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0547 Unknown debugfs error injection entry\n"); @@ -1042,7 +1052,7 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf, struct dentry *dent = file->f_dentry; struct lpfc_hba *phba = file->private_data; char dstbuf[32]; - unsigned long tmp; + uint64_t tmp = 0; int size; memset(dstbuf, 0, 32); @@ -1050,7 +1060,12 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf, if (copy_from_user(dstbuf, buf, size)) return 0; - if (strict_strtoul(dstbuf, 0, &tmp)) + if (dent == phba->debug_InjErrLBA) { + if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f')) + tmp = (uint64_t)(-1); + } + + if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp))) return 0; if (dent == phba->debug_writeGuard) @@ -1067,7 +1082,12 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf, phba->lpfc_injerr_rref_cnt = (uint32_t)tmp; else if (dent == phba->debug_InjErrLBA) phba->lpfc_injerr_lba = (sector_t)tmp; - else + else if (dent == phba->debug_InjErrNPortID) + phba->lpfc_injerr_nportid = (uint32_t)(tmp & Mask_DID); + else if (dent == phba->debug_InjErrWWPN) { + tmp = cpu_to_be64(tmp); + memcpy(&phba->lpfc_injerr_wwpn, &tmp, sizeof(struct lpfc_name)); + } else lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0548 Unknown debugfs error injection entry\n"); @@ -3949,6 +3969,28 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) } phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + snprintf(name, sizeof(name), "InjErrNPortID"); + phba->debug_InjErrNPortID = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_InjErrNPortID) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0809 Cannot create debugfs InjErrNPortID\n"); + goto debug_failed; + } + + snprintf(name, sizeof(name), "InjErrWWPN"); + phba->debug_InjErrWWPN = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_InjErrWWPN) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0810 Cannot create debugfs InjErrWWPN\n"); + goto debug_failed; + } + snprintf(name, sizeof(name), "writeGuardInjErr"); phba->debug_writeGuard = debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, @@ -4321,6 +4363,14 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport) debugfs_remove(phba->debug_InjErrLBA); /* InjErrLBA */ phba->debug_InjErrLBA = NULL; } + if (phba->debug_InjErrNPortID) { /* InjErrNPortID */ + debugfs_remove(phba->debug_InjErrNPortID); + phba->debug_InjErrNPortID = NULL; + } + if (phba->debug_InjErrWWPN) { + debugfs_remove(phba->debug_InjErrWWPN); /* InjErrWWPN */ + phba->debug_InjErrWWPN = NULL; + } if (phba->debug_writeGuard) { debugfs_remove(phba->debug_writeGuard); /* writeGuard */ phba->debug_writeGuard = NULL; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 8db2fb3..3407b39 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -925,9 +925,17 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, * due to new FCF discovery */ if ((phba->hba_flag & HBA_FIP_SUPPORT) && - (phba->fcf.fcf_flag & FCF_DISCOVERY) && - !((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && - (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED))) { + (phba->fcf.fcf_flag & FCF_DISCOVERY)) { + if (phba->link_state < LPFC_LINK_UP) + goto stop_rr_fcf_flogi; + if ((phba->fcoe_cvl_eventtag_attn == + phba->fcoe_cvl_eventtag) && + (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && + (irsp->un.ulpWord[4] == IOERR_SLI_ABORTED)) + goto stop_rr_fcf_flogi; + else + phba->fcoe_cvl_eventtag_attn = + phba->fcoe_cvl_eventtag; lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS, "2611 FLOGI failed on FCF (x%x), " "status:x%x/x%x, tmo:x%x, perform " @@ -943,6 +951,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, goto out; } +stop_rr_fcf_flogi: /* FLOGI failure */ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, "2858 FLOGI failure Status:x%x/x%x TMO:x%x\n", diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 343d87b..b507536 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -2843,7 +2843,14 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) struct lpfc_vport *vport = mboxq->vport; struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - if (mboxq->u.mb.mbxStatus) { + /* + * VFI not supported for interface type 0, so ignore any mailbox + * error (except VFI in use) and continue with the discovery. + */ + if (mboxq->u.mb.mbxStatus && + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_0) && + mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, "2018 REG_VFI mbxStatus error x%x " "HBA state x%x\n", @@ -5673,14 +5680,13 @@ lpfc_fcf_inuse(struct lpfc_hba *phba) ret = 1; spin_unlock_irq(shost->host_lock); goto out; - } else { + } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { + ret = 1; lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "2624 RPI %x DID %x flg %x still " - "logged in\n", - ndlp->nlp_rpi, ndlp->nlp_DID, - ndlp->nlp_flag); - if (ndlp->nlp_flag & NLP_RPI_REGISTERED) - ret = 1; + "2624 RPI %x DID %x flag %x " + "still logged in\n", + ndlp->nlp_rpi, ndlp->nlp_DID, + ndlp->nlp_flag); } } spin_unlock_irq(shost->host_lock); diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 9e2b9b2..91f0976 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2009 Emulex. All rights reserved. * + * Copyright (C) 2009-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -338,6 +338,12 @@ struct lpfc_cqe { #define CQE_CODE_XRI_ABORTED 0x5 #define CQE_CODE_RECEIVE_V1 0x9 +/* + * Define mask value for xri_aborted and wcqe completed CQE extended status. + * Currently, extended status is limited to 9 bits (0x0 -> 0x103) . + */ +#define WCQE_PARAM_MASK 0x1FF; + /* completion queue entry for wqe completions */ struct lpfc_wcqe_complete { uint32_t word0; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index b38f99f..9598fdc 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -2704,16 +2704,14 @@ lpfc_offline_prep(struct lpfc_hba * phba) } spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NPR_ADISC; - + spin_unlock_irq(shost->host_lock); /* * Whenever an SLI4 port goes offline, free the - * RPI. A new RPI when the adapter port comes - * back online. + * RPI. Get a new RPI when the adapter port + * comes back online. */ if (phba->sli_rev == LPFC_SLI_REV4) lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi); - - spin_unlock_irq(shost->host_lock); lpfc_unreg_rpi(vports[i], ndlp); } } @@ -2786,9 +2784,13 @@ lpfc_scsi_buf_update(struct lpfc_hba *phba) spin_lock_irq(&phba->hbalock); spin_lock(&phba->scsi_buf_list_lock); - list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) + list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) { sb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag]; + set_bit(sb->cur_iocbq.sli4_lxritag, phba->sli4_hba.xri_bmask); + phba->sli4_hba.max_cfg_param.xri_used++; + phba->sli4_hba.xri_count++; + } spin_unlock(&phba->scsi_buf_list_lock); spin_unlock_irq(&phba->hbalock); return 0; @@ -3723,6 +3725,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba, break; case LPFC_FIP_EVENT_TYPE_FCF_DEAD: + phba->fcoe_cvl_eventtag = acqe_fip->event_tag; lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY, "2549 FCF (x%x) disconnected from network, " "tag:x%x\n", acqe_fip->index, acqe_fip->event_tag); @@ -3784,6 +3787,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba, } break; case LPFC_FIP_EVENT_TYPE_CVL: + phba->fcoe_cvl_eventtag = acqe_fip->event_tag; lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY, "2718 Clear Virtual Link Received for VPI 0x%x" " tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag); @@ -5226,8 +5230,7 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) * rpi is normalized to a zero base because the physical rpi is * port based. */ - curr_rpi_range = phba->sli4_hba.next_rpi - - phba->sli4_hba.max_cfg_param.rpi_base; + curr_rpi_range = phba->sli4_hba.next_rpi; spin_unlock_irq(&phba->hbalock); /* @@ -5818,10 +5821,9 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba) readl(phba->sli4_hba.u.if_type2. ERR2regaddr); lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2888 Port Error Detected " - "during POST: " - "port status reg 0x%x, " - "port_smphr reg 0x%x, " + "2888 Unrecoverable port error " + "following POST: port status reg " + "0x%x, port_smphr reg 0x%x, " "error 1=0x%x, error 2=0x%x\n", reg_data.word0, portsmphr_reg.word0, @@ -6142,7 +6144,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base; phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base; phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base; - phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base; phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ? (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0; phba->max_vports = phba->max_vpi; @@ -7231,6 +7232,7 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) uint32_t rdy_chk, num_resets = 0, reset_again = 0; union lpfc_sli4_cfg_shdr *shdr; struct lpfc_register reg_data; + uint16_t devid; if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); switch (if_type) { @@ -7277,7 +7279,9 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) LPFC_SLIPORT_INIT_PORT); writel(reg_data.word0, phba->sli4_hba.u.if_type2. CTRLregaddr); - + /* flush */ + pci_read_config_word(phba->pcidev, + PCI_DEVICE_ID, &devid); /* * Poll the Port Status Register and wait for RDY for * up to 10 seconds. If the port doesn't respond, treat @@ -7315,11 +7319,10 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) phba->work_status[1] = readl( phba->sli4_hba.u.if_type2.ERR2regaddr); lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2890 Port Error Detected " - "during Port Reset: " - "port status reg 0x%x, " + "2890 Port error detected during port " + "reset(%d): port status reg 0x%x, " "error 1=0x%x, error 2=0x%x\n", - reg_data.word0, + num_resets, reg_data.word0, phba->work_status[0], phba->work_status[1]); rc = -ENODEV; diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 7b6b2aa..15ca2a9 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2009 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -440,11 +440,15 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, spin_unlock_irq(shost->host_lock); stat.un.b.lsRjtRsnCode = LSRJT_INVALID_CMD; stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE; - lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, + rc = lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, mbox); + if (rc) + mempool_free(mbox, phba->mbox_mem_pool); return 1; } - lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox); + rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox); + if (rc) + mempool_free(mbox, phba->mbox_mem_pool); return 1; out: stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index efc055b..88f3a83 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -39,8 +39,8 @@ #include "lpfc_sli4.h" #include "lpfc_nl.h" #include "lpfc_disc.h" -#include "lpfc_scsi.h" #include "lpfc.h" +#include "lpfc_scsi.h" #include "lpfc_logmsg.h" #include "lpfc_crtn.h" #include "lpfc_vport.h" @@ -51,13 +51,19 @@ int _dump_buf_done; static char *dif_op_str[] = { - "SCSI_PROT_NORMAL", - "SCSI_PROT_READ_INSERT", - "SCSI_PROT_WRITE_STRIP", - "SCSI_PROT_READ_STRIP", - "SCSI_PROT_WRITE_INSERT", - "SCSI_PROT_READ_PASS", - "SCSI_PROT_WRITE_PASS", + "PROT_NORMAL", + "PROT_READ_INSERT", + "PROT_WRITE_STRIP", + "PROT_READ_STRIP", + "PROT_WRITE_INSERT", + "PROT_READ_PASS", + "PROT_WRITE_PASS", +}; + +static char *dif_grd_str[] = { + "NO_GUARD", + "DIF_CRC", + "DIX_IP", }; struct scsi_dif_tuple { @@ -1281,10 +1287,14 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) #ifdef CONFIG_SCSI_LPFC_DEBUG_FS -#define BG_ERR_INIT 1 -#define BG_ERR_TGT 2 -#define BG_ERR_SWAP 3 -#define BG_ERR_CHECK 4 +/* Return if if error injection is detected by Initiator */ +#define BG_ERR_INIT 0x1 +/* Return if if error injection is detected by Target */ +#define BG_ERR_TGT 0x2 +/* Return if if swapping CSUM<-->CRC is required for error injection */ +#define BG_ERR_SWAP 0x10 +/* Return if disabling Guard/Ref/App checking is required for error injection */ +#define BG_ERR_CHECK 0x20 /** * lpfc_bg_err_inject - Determine if we should inject an error @@ -1294,10 +1304,7 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) * @apptag: (out) BlockGuard application tag for transmitted data * @new_guard (in) Value to replace CRC with if needed * - * Returns (1) if error injection is detected by Initiator - * Returns (2) if error injection is detected by Target - * Returns (3) if swapping CSUM->CRC is required for error injection - * Returns (4) disabling Guard/Ref/App checking is required for error injection + * Returns BG_ERR_* bit mask or 0 if request ignored **/ static int lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, @@ -1305,7 +1312,10 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, { struct scatterlist *sgpe; /* s/g prot entry */ struct scatterlist *sgde; /* s/g data entry */ + struct lpfc_scsi_buf *lpfc_cmd = NULL; struct scsi_dif_tuple *src = NULL; + struct lpfc_nodelist *ndlp; + struct lpfc_rport_data *rdata; uint32_t op = scsi_get_prot_op(sc); uint32_t blksize; uint32_t numblks; @@ -1318,8 +1328,9 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, sgpe = scsi_prot_sglist(sc); sgde = scsi_sglist(sc); - lba = scsi_get_lba(sc); + + /* First check if we need to match the LBA */ if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) { blksize = lpfc_cmd_blksize(sc); numblks = (scsi_bufflen(sc) + blksize - 1) / blksize; @@ -1334,66 +1345,123 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, sizeof(struct scsi_dif_tuple); if (numblks < blockoff) blockoff = numblks; - src = (struct scsi_dif_tuple *)sg_virt(sgpe); - src += blockoff; } } + /* Next check if we need to match the remote NPortID or WWPN */ + rdata = sc->device->hostdata; + if (rdata && rdata->pnode) { + ndlp = rdata->pnode; + + /* Make sure we have the right NPortID if one is specified */ + if (phba->lpfc_injerr_nportid && + (phba->lpfc_injerr_nportid != ndlp->nlp_DID)) + return 0; + + /* + * Make sure we have the right WWPN if one is specified. + * wwn[0] should be a non-zero NAA in a good WWPN. + */ + if (phba->lpfc_injerr_wwpn.u.wwn[0] && + (memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn, + sizeof(struct lpfc_name)) != 0)) + return 0; + } + + /* Setup a ptr to the protection data if the SCSI host provides it */ + if (sgpe) { + src = (struct scsi_dif_tuple *)sg_virt(sgpe); + src += blockoff; + lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble; + } + /* Should we change the Reference Tag */ if (reftag) { if (phba->lpfc_injerr_wref_cnt) { switch (op) { case SCSI_PROT_WRITE_PASS: - if (blockoff && src) { - /* Insert error in middle of the IO */ + if (src) { + /* + * For WRITE_PASS, force the error + * to be sent on the wire. It should + * be detected by the Target. + * If blockoff != 0 error will be + * inserted in middle of the IO. + */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9076 BLKGRD: Injecting reftag error: " "write lba x%lx + x%x oldrefTag x%x\n", (unsigned long)lba, blockoff, - src->ref_tag); + be32_to_cpu(src->ref_tag)); /* - * NOTE, this will change ref tag in - * the memory location forever! + * Save the old ref_tag so we can + * restore it on completion. */ - src->ref_tag = 0xDEADBEEF; + if (lpfc_cmd) { + lpfc_cmd->prot_data_type = + LPFC_INJERR_REFTAG; + lpfc_cmd->prot_data_segment = + src; + lpfc_cmd->prot_data = + src->ref_tag; + } + src->ref_tag = cpu_to_be32(0xDEADBEEF); phba->lpfc_injerr_wref_cnt--; - phba->lpfc_injerr_lba = - LPFC_INJERR_LBA_OFF; - rc = BG_ERR_CHECK; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; + break; } /* Drop thru */ - case SCSI_PROT_WRITE_STRIP: + case SCSI_PROT_WRITE_INSERT: /* - * For WRITE_STRIP and WRITE_PASS, - * force the error on data - * being copied from SLI-Host to SLI-Port. + * For WRITE_INSERT, force the error + * to be sent on the wire. It should be + * detected by the Target. */ + /* DEADBEEF will be the reftag on the wire */ *reftag = 0xDEADBEEF; phba->lpfc_injerr_wref_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = BG_ERR_INIT; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9077 BLKGRD: Injecting reftag error: " + "9078 BLKGRD: Injecting reftag error: " "write lba x%lx\n", (unsigned long)lba); break; - case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_WRITE_STRIP: /* - * For WRITE_INSERT, force the - * error to be sent on the wire. It should be - * detected by the Target. + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. */ - /* DEADBEEF will be the reftag on the wire */ *reftag = 0xDEADBEEF; phba->lpfc_injerr_wref_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = BG_ERR_TGT; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9078 BLKGRD: Injecting reftag error: " + "9077 BLKGRD: Injecting reftag error: " "write lba x%lx\n", (unsigned long)lba); break; } @@ -1401,11 +1469,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_rref_cnt) { switch (op) { case SCSI_PROT_READ_INSERT: - /* - * For READ_INSERT, it doesn't make sense - * to change the reftag. - */ - break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_READ_PASS: /* @@ -1415,7 +1478,13 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, */ *reftag = 0xDEADBEEF; phba->lpfc_injerr_rref_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_rref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, @@ -1431,56 +1500,87 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_wapp_cnt) { switch (op) { case SCSI_PROT_WRITE_PASS: - if (blockoff && src) { - /* Insert error in middle of the IO */ + if (src) { + /* + * For WRITE_PASS, force the error + * to be sent on the wire. It should + * be detected by the Target. + * If blockoff != 0 error will be + * inserted in middle of the IO. + */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9080 BLKGRD: Injecting apptag error: " "write lba x%lx + x%x oldappTag x%x\n", (unsigned long)lba, blockoff, - src->app_tag); + be16_to_cpu(src->app_tag)); /* - * NOTE, this will change app tag in - * the memory location forever! + * Save the old app_tag so we can + * restore it on completion. */ - src->app_tag = 0xDEAD; + if (lpfc_cmd) { + lpfc_cmd->prot_data_type = + LPFC_INJERR_APPTAG; + lpfc_cmd->prot_data_segment = + src; + lpfc_cmd->prot_data = + src->app_tag; + } + src->app_tag = cpu_to_be16(0xDEAD); phba->lpfc_injerr_wapp_cnt--; - phba->lpfc_injerr_lba = - LPFC_INJERR_LBA_OFF; - rc = BG_ERR_CHECK; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; break; } /* Drop thru */ - case SCSI_PROT_WRITE_STRIP: + case SCSI_PROT_WRITE_INSERT: /* - * For WRITE_STRIP and WRITE_PASS, - * force the error on data - * being copied from SLI-Host to SLI-Port. + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. */ + /* DEAD will be the apptag on the wire */ *apptag = 0xDEAD; phba->lpfc_injerr_wapp_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = BG_ERR_INIT; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0812 BLKGRD: Injecting apptag error: " + "0813 BLKGRD: Injecting apptag error: " "write lba x%lx\n", (unsigned long)lba); break; - case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_WRITE_STRIP: /* - * For WRITE_INSERT, force the - * error to be sent on the wire. It should be - * detected by the Target. + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. */ - /* DEAD will be the apptag on the wire */ *apptag = 0xDEAD; phba->lpfc_injerr_wapp_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = BG_ERR_TGT; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0813 BLKGRD: Injecting apptag error: " + "0812 BLKGRD: Injecting apptag error: " "write lba x%lx\n", (unsigned long)lba); break; } @@ -1488,11 +1588,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_rapp_cnt) { switch (op) { case SCSI_PROT_READ_INSERT: - /* - * For READ_INSERT, it doesn't make sense - * to change the apptag. - */ - break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_READ_PASS: /* @@ -1502,7 +1597,13 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, */ *apptag = 0xDEAD; phba->lpfc_injerr_rapp_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_rapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, @@ -1519,57 +1620,51 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_wgrd_cnt) { switch (op) { case SCSI_PROT_WRITE_PASS: - if (blockoff && src) { - /* Insert error in middle of the IO */ - - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0815 BLKGRD: Injecting guard error: " - "write lba x%lx + x%x oldgrdTag x%x\n", - (unsigned long)lba, blockoff, - src->guard_tag); - - /* - * NOTE, this will change guard tag in - * the memory location forever! - */ - src->guard_tag = 0xDEAD; - phba->lpfc_injerr_wgrd_cnt--; - phba->lpfc_injerr_lba = - LPFC_INJERR_LBA_OFF; - rc = BG_ERR_CHECK; - break; - } + rc = BG_ERR_CHECK; /* Drop thru */ - case SCSI_PROT_WRITE_STRIP: + + case SCSI_PROT_WRITE_INSERT: /* - * For WRITE_STRIP and WRITE_PASS, - * force the error on data - * being copied from SLI-Host to SLI-Port. + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. */ phba->lpfc_injerr_wgrd_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_wgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } - rc = BG_ERR_SWAP; + rc |= BG_ERR_TGT | BG_ERR_SWAP; /* Signals the caller to swap CRC->CSUM */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0816 BLKGRD: Injecting guard error: " + "0817 BLKGRD: Injecting guard error: " "write lba x%lx\n", (unsigned long)lba); break; - case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_WRITE_STRIP: /* - * For WRITE_INSERT, force the - * error to be sent on the wire. It should be - * detected by the Target. + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. */ phba->lpfc_injerr_wgrd_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_wgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } - rc = BG_ERR_SWAP; + rc = BG_ERR_INIT | BG_ERR_SWAP; /* Signals the caller to swap CRC->CSUM */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "0817 BLKGRD: Injecting guard error: " + "0816 BLKGRD: Injecting guard error: " "write lba x%lx\n", (unsigned long)lba); break; } @@ -1577,11 +1672,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (phba->lpfc_injerr_rgrd_cnt) { switch (op) { case SCSI_PROT_READ_INSERT: - /* - * For READ_INSERT, it doesn't make sense - * to change the guard tag. - */ - break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_READ_PASS: /* @@ -1589,11 +1679,16 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, * error on data being read off the wire. It * should force an IO error to the driver. */ - *apptag = 0xDEAD; phba->lpfc_injerr_rgrd_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + if (phba->lpfc_injerr_rgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } - rc = BG_ERR_SWAP; + rc = BG_ERR_INIT | BG_ERR_SWAP; /* Signals the caller to swap CRC->CSUM */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, @@ -1629,20 +1724,20 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - *txop = BG_OP_IN_CSUM_OUT_NODIF; *rxop = BG_OP_IN_NODIF_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_NODIF; break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - *txop = BG_OP_IN_NODIF_OUT_CRC; *rxop = BG_OP_IN_CRC_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CRC; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - *txop = BG_OP_IN_CSUM_OUT_CRC; *rxop = BG_OP_IN_CRC_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_CRC; break; case SCSI_PROT_NORMAL: @@ -1658,20 +1753,20 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - *txop = BG_OP_IN_NODIF_OUT_CRC; *rxop = BG_OP_IN_CRC_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CRC; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - *txop = BG_OP_IN_CRC_OUT_CRC; *rxop = BG_OP_IN_CRC_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_CRC; break; case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - *txop = BG_OP_IN_CRC_OUT_NODIF; *rxop = BG_OP_IN_NODIF_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_NODIF; break; case SCSI_PROT_NORMAL: @@ -1710,20 +1805,20 @@ lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - *txop = BG_OP_IN_CRC_OUT_NODIF; *rxop = BG_OP_IN_NODIF_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_NODIF; break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - *txop = BG_OP_IN_NODIF_OUT_CSUM; *rxop = BG_OP_IN_CSUM_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CSUM; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - *txop = BG_OP_IN_CRC_OUT_CRC; - *rxop = BG_OP_IN_CRC_OUT_CRC; + *rxop = BG_OP_IN_CSUM_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_CSUM; break; case SCSI_PROT_NORMAL: @@ -1735,20 +1830,20 @@ lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - *txop = BG_OP_IN_NODIF_OUT_CSUM; *rxop = BG_OP_IN_CSUM_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CSUM; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - *txop = BG_OP_IN_CSUM_OUT_CRC; - *rxop = BG_OP_IN_CRC_OUT_CSUM; + *rxop = BG_OP_IN_CSUM_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_CSUM; break; case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - *txop = BG_OP_IN_CSUM_OUT_NODIF; *rxop = BG_OP_IN_NODIF_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_NODIF; break; case SCSI_PROT_NORMAL: @@ -1817,11 +1912,11 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); if (rc) { - if (rc == BG_ERR_SWAP) + if (rc & BG_ERR_SWAP) lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); - if (rc == BG_ERR_CHECK) + if (rc & BG_ERR_CHECK) checking = 0; } #endif @@ -1964,11 +2059,11 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); if (rc) { - if (rc == BG_ERR_SWAP) + if (rc & BG_ERR_SWAP) lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); - if (rc == BG_ERR_CHECK) + if (rc & BG_ERR_CHECK) checking = 0; } #endif @@ -2172,11 +2267,11 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); if (rc) { - if (rc == BG_ERR_SWAP) + if (rc & BG_ERR_SWAP) lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); - if (rc == BG_ERR_CHECK) + if (rc & BG_ERR_CHECK) checking = 0; } #endif @@ -2312,11 +2407,11 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); if (rc) { - if (rc == BG_ERR_SWAP) + if (rc & BG_ERR_SWAP) lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); - if (rc == BG_ERR_CHECK) + if (rc & BG_ERR_CHECK) checking = 0; } #endif @@ -2788,7 +2883,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, /* No error was reported - problem in FW? */ cmd->result = ScsiResult(DID_ERROR, 0); lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9057 BLKGRD: no errors reported!\n"); + "9057 BLKGRD: Unknown error reported!\n"); } out: @@ -3460,6 +3555,37 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, /* pick up SLI4 exhange busy status from HBA */ lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY; +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + if (lpfc_cmd->prot_data_type) { + struct scsi_dif_tuple *src = NULL; + + src = (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment; + /* + * Used to restore any changes to protection + * data for error injection. + */ + switch (lpfc_cmd->prot_data_type) { + case LPFC_INJERR_REFTAG: + src->ref_tag = + lpfc_cmd->prot_data; + break; + case LPFC_INJERR_APPTAG: + src->app_tag = + (uint16_t)lpfc_cmd->prot_data; + break; + case LPFC_INJERR_GUARD: + src->guard_tag = + (uint16_t)lpfc_cmd->prot_data; + break; + default: + break; + } + + lpfc_cmd->prot_data = 0; + lpfc_cmd->prot_data_type = 0; + lpfc_cmd->prot_data_segment = NULL; + } +#endif if (pnode && NLP_CHK_NODE_ACT(pnode)) atomic_dec(&pnode->cmd_pending); @@ -4061,15 +4187,6 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) cmnd->result = err; goto out_fail_command; } - /* - * Do not let the mid-layer retry I/O too fast. If an I/O is retried - * without waiting a bit then indicate that the device is busy. - */ - if (cmnd->retries && - time_before(jiffies, (cmnd->jiffies_at_alloc + - msecs_to_jiffies(LPFC_RETRY_PAUSE * - cmnd->retries)))) - return SCSI_MLQUEUE_DEVICE_BUSY; ndlp = rdata->pnode; if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) && @@ -4119,63 +4236,48 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) { if (vport->phba->cfg_enable_bg) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9033 BLKGRD: rcvd protected cmd:%02x op:%02x " - "str=%s\n", - cmnd->cmnd[0], scsi_get_prot_op(cmnd), - dif_op_str[scsi_get_prot_op(cmnd)]); - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x\n", - cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2], - cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5], - cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8], - cmnd->cmnd[9]); + "9033 BLKGRD: rcvd protected cmd:%02x op=%s " + "guard=%s\n", cmnd->cmnd[0], + dif_op_str[scsi_get_prot_op(cmnd)], + dif_grd_str[scsi_host_get_guard(shost)]); if (cmnd->cmnd[0] == READ_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9035 BLKGRD: READ @ sector %llu, " - "count %u\n", + "cnt %u, rpt %d\n", (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request)); + blk_rq_sectors(cmnd->request), + (cmnd->cmnd[1]>>5)); else if (cmnd->cmnd[0] == WRITE_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9036 BLKGRD: WRITE @ sector %llu, " - "count %u cmd=%p\n", + "cnt %u, wpt %d\n", (unsigned long long)scsi_get_lba(cmnd), blk_rq_sectors(cmnd->request), - cmnd); + (cmnd->cmnd[1]>>5)); } err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); } else { if (vport->phba->cfg_enable_bg) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9038 BLKGRD: rcvd unprotected cmd:" - "%02x op:%02x str=%s\n", - cmnd->cmnd[0], scsi_get_prot_op(cmnd), - dif_op_str[scsi_get_prot_op(cmnd)]); - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9039 BLKGRD: CDB: %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x %02x\n", - cmnd->cmnd[0], cmnd->cmnd[1], - cmnd->cmnd[2], cmnd->cmnd[3], - cmnd->cmnd[4], cmnd->cmnd[5], - cmnd->cmnd[6], cmnd->cmnd[7], - cmnd->cmnd[8], cmnd->cmnd[9]); + "9038 BLKGRD: rcvd unprotected cmd:" + "%02x op=%s guard=%s\n", cmnd->cmnd[0], + dif_op_str[scsi_get_prot_op(cmnd)], + dif_grd_str[scsi_host_get_guard(shost)]); if (cmnd->cmnd[0] == READ_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9040 dbg: READ @ sector %llu, " - "count %u\n", + "cnt %u, rpt %d\n", (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request)); + blk_rq_sectors(cmnd->request), + (cmnd->cmnd[1]>>5)); else if (cmnd->cmnd[0] == WRITE_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9041 dbg: WRITE @ sector %llu, " - "count %u cmd=%p\n", - (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request), cmnd); - else - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9042 dbg: parser not implemented\n"); + "9041 dbg: WRITE @ sector %llu, " + "cnt %u, wpt %d\n", + (unsigned long long)scsi_get_lba(cmnd), + blk_rq_sectors(cmnd->request), + (cmnd->cmnd[1]>>5)); } err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd); } diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h index 9075a08..21a2ffe 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.h +++ b/drivers/scsi/lpfc/lpfc_scsi.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2006 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -150,9 +150,18 @@ struct lpfc_scsi_buf { struct lpfc_iocbq cur_iocbq; wait_queue_head_t *waitq; unsigned long start_time; + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + /* Used to restore any changes to protection data for error injection */ + void *prot_data_segment; + uint32_t prot_data; + uint32_t prot_data_type; +#define LPFC_INJERR_REFTAG 1 +#define LPFC_INJERR_APPTAG 2 +#define LPFC_INJERR_GUARD 3 +#endif }; #define LPFC_SCSI_DMA_EXT_SIZE 264 #define LPFC_BPL_SIZE 1024 -#define LPFC_RETRY_PAUSE 300 #define MDAC_DIRECT_CMD 0x22 diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index e0e4d8d..dbaf5b9 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -5578,8 +5578,6 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) for (i = 0; i < count; i++) phba->sli4_hba.rpi_ids[i] = base + i; - lpfc_sli4_node_prep(phba); - /* VPIs. */ count = phba->sli4_hba.max_cfg_param.max_vpi; base = phba->sli4_hba.max_cfg_param.vpi_base; @@ -5613,6 +5611,8 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) rc = -ENOMEM; goto free_vpi_ids; } + phba->sli4_hba.max_cfg_param.xri_used = 0; + phba->sli4_hba.xri_count = 0; phba->sli4_hba.xri_ids = kzalloc(count * sizeof(uint16_t), GFP_KERNEL); @@ -6147,6 +6147,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) rc = -ENODEV; goto out_free_mbox; } + lpfc_sli4_node_prep(phba); /* Create all the SLI4 queues */ rc = lpfc_sli4_queue_create(phba); @@ -7251,11 +7252,13 @@ lpfc_sli4_post_async_mbox(struct lpfc_hba *phba) out_not_finished: spin_lock_irqsave(&phba->hbalock, iflags); - mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED; - __lpfc_mbox_cmpl_put(phba, mboxq); - /* Release the token */ - psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; - phba->sli.mbox_active = NULL; + if (phba->sli.mbox_active) { + mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED; + __lpfc_mbox_cmpl_put(phba, mboxq); + /* Release the token */ + psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; + phba->sli.mbox_active = NULL; + } spin_unlock_irqrestore(&phba->hbalock, iflags); return MBX_NOT_FINISHED; @@ -7743,6 +7746,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, if (pcmd && (*pcmd == ELS_CMD_FLOGI || *pcmd == ELS_CMD_SCR || *pcmd == ELS_CMD_FDISC || + *pcmd == ELS_CMD_LOGO || *pcmd == ELS_CMD_PLOGI)) { bf_set(els_req64_sp, &wqe->els_req, 1); bf_set(els_req64_sid, &wqe->els_req, @@ -8385,6 +8389,7 @@ lpfc_sli4_abts_err_handler(struct lpfc_hba *phba, struct sli4_wcqe_xri_aborted *axri) { struct lpfc_vport *vport; + uint32_t ext_status = 0; if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { lpfc_printf_log(phba, KERN_INFO, LOG_SLI, @@ -8396,12 +8401,20 @@ lpfc_sli4_abts_err_handler(struct lpfc_hba *phba, vport = ndlp->vport; lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "3116 Port generated FCP XRI ABORT event on " - "vpi %d rpi %d xri x%x status 0x%x\n", + "vpi %d rpi %d xri x%x status 0x%x parameter x%x\n", ndlp->vport->vpi, ndlp->nlp_rpi, bf_get(lpfc_wcqe_xa_xri, axri), - bf_get(lpfc_wcqe_xa_status, axri)); + bf_get(lpfc_wcqe_xa_status, axri), + axri->parameter); - if (bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT) + /* + * Catch the ABTS protocol failure case. Older OCe FW releases returned + * LOCAL_REJECT and 0 for a failed ABTS exchange and later OCe and + * LPe FW releases returned LOCAL_REJECT and SEQUENCE_TIMEOUT. + */ + ext_status = axri->parameter & WCQE_PARAM_MASK; + if ((bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT) && + ((ext_status == IOERR_SEQUENCE_TIMEOUT) || (ext_status == 0))) lpfc_sli_abts_recover_port(vport, ndlp); } @@ -9807,12 +9820,11 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba) unsigned long timeout; timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; + spin_lock_irq(&phba->hbalock); psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK; - spin_unlock_irq(&phba->hbalock); if (psli->sli_flag & LPFC_SLI_ACTIVE) { - spin_lock_irq(&phba->hbalock); /* Determine how long we might wait for the active mailbox * command to be gracefully completed by firmware. */ @@ -9831,7 +9843,9 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba) */ break; } - } + } else + spin_unlock_irq(&phba->hbalock); + lpfc_sli_mbox_sys_flush(phba); } @@ -13272,7 +13286,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba) LPFC_MBOXQ_t *mbox; uint32_t reqlen, alloclen, index; uint32_t mbox_tmo; - uint16_t rsrc_start, rsrc_size, els_xri_cnt; + uint16_t rsrc_start, rsrc_size, els_xri_cnt, post_els_xri_cnt; uint16_t xritag_start = 0, lxri = 0; struct lpfc_rsrc_blks *rsrc_blk; int cnt, ttl_cnt, rc = 0; @@ -13294,6 +13308,7 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba) cnt = 0; ttl_cnt = 0; + post_els_xri_cnt = els_xri_cnt; list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list, list) { rsrc_start = rsrc_blk->rsrc_start; @@ -13303,11 +13318,12 @@ lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba) "3014 Working ELS Extent start %d, cnt %d\n", rsrc_start, rsrc_size); - loop_cnt = min(els_xri_cnt, rsrc_size); - if (ttl_cnt + loop_cnt >= els_xri_cnt) { - loop_cnt = els_xri_cnt - ttl_cnt; - ttl_cnt = els_xri_cnt; - } + loop_cnt = min(post_els_xri_cnt, rsrc_size); + if (loop_cnt < post_els_xri_cnt) { + post_els_xri_cnt -= loop_cnt; + ttl_cnt += loop_cnt; + } else + ttl_cnt += post_els_xri_cnt; mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) @@ -14203,15 +14219,14 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba, * field and RX_ID from ABTS for RX_ID field. */ bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_RSP); - bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid); } else { /* ABTS sent by initiator to CT exchange, construction * of BA_ACC will need to allocate a new XRI as for the - * XRI_TAG and RX_ID fields. + * XRI_TAG field. */ bf_set(lpfc_abts_orig, &icmd->un.bls_rsp, LPFC_ABTS_UNSOL_INT); - bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, NO_XRI); } + bf_set(lpfc_abts_rxid, &icmd->un.bls_rsp, rxid); bf_set(lpfc_abts_oxid, &icmd->un.bls_rsp, oxid); /* Xmit CT abts response on exchange <xid> */ @@ -15042,6 +15057,7 @@ lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index) LPFC_MBOXQ_t *mboxq; phba->fcoe_eventtag_at_fcf_scan = phba->fcoe_eventtag; + phba->fcoe_cvl_eventtag_attn = phba->fcoe_cvl_eventtag; mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mboxq) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index f2a2602..25cefc2 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.29" +#define LPFC_DRIVER_VERSION "8.3.30" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" #define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index e617337..e5cd8d8 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -22,7 +22,6 @@ #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> -#include <asm/system.h> #include <asm/pci-bridge.h> #include <asm/macio.h> diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index 2bccfbe..24828b5 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -43,7 +43,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/macintosh.h> #include <asm/macints.h> diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index 4944747..e8a04ae 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -33,7 +33,6 @@ #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/hydra.h> #include <asm/processor.h> diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 5e69f46..8a59a77 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -657,7 +657,7 @@ _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info) return; /* eat the loginfos associated with task aborts */ - if (ioc->ignore_loginfos && (log_info == 30050000 || log_info == + if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info == 0x31140000 || log_info == 0x31130000)) return; @@ -2060,12 +2060,10 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) { int i = 0; char desc[16]; - u8 revision; u32 iounit_pg1_flags; u32 bios_version; bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); - pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); strncpy(desc, ioc->manu_pg0.ChipName, 16); printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), " "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", @@ -2074,7 +2072,7 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, ioc->facts.FWVersion.Word & 0x000000FF, - revision, + ioc->pdev->revision, (bios_version & 0xFF000000) >> 24, (bios_version & 0x00FF0000) >> 16, (bios_version & 0x0000FF00) >> 8, diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 7fceb89..3b9a28e 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -1026,7 +1026,6 @@ _ctl_getiocinfo(void __user *arg) { struct mpt2_ioctl_iocinfo karg; struct MPT2SAS_ADAPTER *ioc; - u8 revision; if (copy_from_user(&karg, arg, sizeof(karg))) { printk(KERN_ERR "failure at %s:%d/%s()!\n", @@ -1046,8 +1045,7 @@ _ctl_getiocinfo(void __user *arg) karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2; if (ioc->pfacts) karg.port_number = ioc->pfacts[0].PortNumber; - pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); - karg.hw_rev = revision; + karg.hw_rev = ioc->pdev->revision; karg.pci_id = ioc->pdev->device; karg.subsystem_device = ioc->pdev->subsystem_device; karg.subsystem_vendor = ioc->pdev->subsystem_vendor; diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 4b3b475..5982a58 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -115,7 +115,6 @@ #include <asm/dma.h> #include <asm/io.h> -#include <asm/system.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 0029249..62b6168 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -38,7 +38,6 @@ #include <linux/dma-mapping.h> #include <asm/dma.h> -#include <asm/system.h> #include <asm/io.h> #include <scsi/scsi.h> diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index de0b1a7..21883a2 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -54,7 +54,6 @@ static const char * osst_version = "0.99.4"; #include <linux/mutex.h> #include <asm/uaccess.h> #include <asm/dma.h> -#include <asm/system.h> /* The driver prints some debugging information on the console if DEBUG is defined and non-zero. */ diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c index f2018b4..2f72c98 100644 --- a/drivers/scsi/pas16.c +++ b/drivers/scsi/pas16.c @@ -113,7 +113,6 @@ #include <linux/module.h> -#include <asm/system.h> #include <linux/signal.h> #include <linux/proc_fs.h> #include <asm/io.h> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 3619f6e..9d82ee5 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2093,6 +2093,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) struct ata_task_resp *resp ; u32 *sata_resp; struct pm8001_device *pm8001_dev; + unsigned long flags; psataPayload = (struct sata_completion_resp *)(piomb + 4); status = le32_to_cpu(psataPayload->status); @@ -2382,26 +2383,26 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_DEV_NO_RESPONSE; break; } - spin_lock_irq(&t->task_state_lock); + spin_lock_irqsave(&t->task_state_lock, flags); t->task_state_flags &= ~SAS_TASK_STATE_PENDING; t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with io_status 0x%x" " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, status, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else if (t->uldd_task) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); spin_lock_irq(&pm8001_ha->lock); } else if (!t->uldd_task) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ spin_unlock_irq(&pm8001_ha->lock); @@ -2423,6 +2424,7 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) u32 tag = le32_to_cpu(psataPayload->tag); u32 port_id = le32_to_cpu(psataPayload->port_id); u32 dev_id = le32_to_cpu(psataPayload->device_id); + unsigned long flags; ccb = &pm8001_ha->ccb_info[tag]; t = ccb->task; @@ -2593,26 +2595,26 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) ts->stat = SAS_OPEN_TO; break; } - spin_lock_irq(&t->task_state_lock); + spin_lock_irqsave(&t->task_state_lock, flags); t->task_state_flags &= ~SAS_TASK_STATE_PENDING; t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with io_status 0x%x" " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, event, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else if (t->uldd_task) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); spin_lock_irq(&pm8001_ha->lock); } else if (!t->uldd_task) { - spin_unlock_irq(&t->task_state_lock); + spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ spin_unlock_irq(&pm8001_ha->lock); diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index d838205..6c6486f 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -359,7 +359,6 @@ #include <asm/byteorder.h> #include <asm/processor.h> #include <asm/types.h> -#include <asm/system.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 7c9f28b..fc542a9 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -431,9 +431,9 @@ static void qla4xxx_mbox_status_entry(struct scsi_qla_host *ha, mbox_sts_entry->out_mbox[6])); if (mbox_sts_entry->out_mbox[0] == MBOX_STS_COMMAND_COMPLETE) - status = QLA_SUCCESS; + status = ISCSI_PING_SUCCESS; else - status = QLA_ERROR; + status = mbox_sts_entry->out_mbox[6]; data_size = sizeof(mbox_sts_entry->out_mbox); diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 3d94194..ee47820 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -834,7 +834,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc) static void qla4xxx_set_port_speed(struct Scsi_Host *shost) { struct scsi_qla_host *ha = to_qla_host(shost); - struct iscsi_cls_host *ihost = shost_priv(shost); + struct iscsi_cls_host *ihost = shost->shost_data; uint32_t speed = ISCSI_PORT_SPEED_UNKNOWN; qla4xxx_get_firmware_state(ha); @@ -859,7 +859,7 @@ static void qla4xxx_set_port_speed(struct Scsi_Host *shost) static void qla4xxx_set_port_state(struct Scsi_Host *shost) { struct scsi_qla_host *ha = to_qla_host(shost); - struct iscsi_cls_host *ihost = shost_priv(shost); + struct iscsi_cls_host *ihost = shost->shost_data; uint32_t state = ISCSI_PORT_STATE_DOWN; if (test_bit(AF_LINK_UP, &ha->flags)) @@ -3445,7 +3445,6 @@ static void qla4xxx_free_adapter(struct scsi_qla_host *ha) int qla4_8xxx_iospace_config(struct scsi_qla_host *ha) { int status = 0; - uint8_t revision_id; unsigned long mem_base, mem_len, db_base, db_len; struct pci_dev *pdev = ha->pdev; @@ -3457,10 +3456,9 @@ int qla4_8xxx_iospace_config(struct scsi_qla_host *ha) goto iospace_error_exit; } - pci_read_config_byte(pdev, PCI_REVISION_ID, &revision_id); DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n", - __func__, revision_id)); - ha->revision_id = revision_id; + __func__, pdev->revision)); + ha->revision_id = pdev->revision; /* remap phys address */ mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */ diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index ede9af9..97b30c1 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k15" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k16" diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index e40dc1c..b191dd5 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -35,7 +35,6 @@ #include "qlogicpti.h" #include <asm/dma.h> -#include <asm/system.h> #include <asm/ptrace.h> #include <asm/pgtable.h> #include <asm/oplib.h> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 5918561..182d5a5 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -101,6 +101,7 @@ static const char * scsi_debug_version_date = "20100324"; #define DEF_LBPU 0 #define DEF_LBPWS 0 #define DEF_LBPWS10 0 +#define DEF_LBPRZ 1 #define DEF_LOWEST_ALIGNED 0 #define DEF_NO_LUN_0 0 #define DEF_NUM_PARTS 0 @@ -186,6 +187,7 @@ static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO; static unsigned int scsi_debug_lbpu = DEF_LBPU; static unsigned int scsi_debug_lbpws = DEF_LBPWS; static unsigned int scsi_debug_lbpws10 = DEF_LBPWS10; +static unsigned int scsi_debug_lbprz = DEF_LBPRZ; static unsigned int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT; static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY; static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS; @@ -775,10 +777,10 @@ static int inquiry_evpd_b1(unsigned char *arr) return 0x3c; } -/* Thin provisioning VPD page (SBC-3) */ +/* Logical block provisioning VPD page (SBC-3) */ static int inquiry_evpd_b2(unsigned char *arr) { - memset(arr, 0, 0x8); + memset(arr, 0, 0x4); arr[0] = 0; /* threshold exponent */ if (scsi_debug_lbpu) @@ -790,7 +792,10 @@ static int inquiry_evpd_b2(unsigned char *arr) if (scsi_debug_lbpws10) arr[1] |= 1 << 5; - return 0x8; + if (scsi_debug_lbprz) + arr[1] |= 1 << 2; + + return 0x4; } #define SDEBUG_LONG_INQ_SZ 96 @@ -1071,8 +1076,11 @@ static int resp_readcap16(struct scsi_cmnd * scp, arr[13] = scsi_debug_physblk_exp & 0xf; arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f; - if (scsi_debug_lbp()) + if (scsi_debug_lbp()) { arr[14] |= 0x80; /* LBPME */ + if (scsi_debug_lbprz) + arr[14] |= 0x40; /* LBPRZ */ + } arr[15] = scsi_debug_lowest_aligned & 0xff; @@ -2046,10 +2054,13 @@ static void unmap_region(sector_t lba, unsigned int len) block = lba + alignment; rem = do_div(block, granularity); - if (rem == 0 && lba + granularity <= end && - block < map_size) + if (rem == 0 && lba + granularity <= end && block < map_size) { clear_bit(block, map_storep); - + if (scsi_debug_lbprz) + memset(fake_storep + + block * scsi_debug_sector_size, 0, + scsi_debug_sector_size); + } lba += granularity - rem; } } @@ -2731,6 +2742,7 @@ module_param_named(guard, scsi_debug_guard, int, S_IRUGO); module_param_named(lbpu, scsi_debug_lbpu, int, S_IRUGO); module_param_named(lbpws, scsi_debug_lbpws, int, S_IRUGO); module_param_named(lbpws10, scsi_debug_lbpws10, int, S_IRUGO); +module_param_named(lbprz, scsi_debug_lbprz, int, S_IRUGO); module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO); module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR); module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR); @@ -2772,6 +2784,7 @@ MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)"); MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)"); MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)"); MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)"); +MODULE_PARM_DESC(lbprz, "unmapped blocks return 0 on read (def=1)"); MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)"); MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)"); MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to 255(def))"); diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index fac3173..1cf640e 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1486,7 +1486,7 @@ void iscsi_post_host_event(uint32_t host_no, struct iscsi_transport *transport, struct iscsi_uevent *ev; int len = NLMSG_SPACE(sizeof(*ev) + data_size); - skb = alloc_skb(len, GFP_KERNEL); + skb = alloc_skb(len, GFP_NOIO); if (!skb) { printk(KERN_ERR "gracefully ignored host event (%d):%d OOM\n", host_no, code); @@ -1504,7 +1504,7 @@ void iscsi_post_host_event(uint32_t host_no, struct iscsi_transport *transport, if (data_size) memcpy((char *)ev + sizeof(*ev), data, data_size); - iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL); + iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_NOIO); } EXPORT_SYMBOL_GPL(iscsi_post_host_event); @@ -1517,7 +1517,7 @@ void iscsi_ping_comp_event(uint32_t host_no, struct iscsi_transport *transport, struct iscsi_uevent *ev; int len = NLMSG_SPACE(sizeof(*ev) + data_size); - skb = alloc_skb(len, GFP_KERNEL); + skb = alloc_skb(len, GFP_NOIO); if (!skb) { printk(KERN_ERR "gracefully ignored ping comp: OOM\n"); return; @@ -1533,7 +1533,7 @@ void iscsi_ping_comp_event(uint32_t host_no, struct iscsi_transport *transport, ev->r.ping_comp.data_size = data_size; memcpy((char *)ev + sizeof(*ev), data, data_size); - iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL); + iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_NOIO); } EXPORT_SYMBOL_GPL(iscsi_ping_comp_event); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 09e3df4..5ba5c2a 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -664,7 +664,7 @@ static void sd_unprep_fn(struct request_queue *q, struct request *rq) } /** - * sd_init_command - build a scsi (read or write) command from + * sd_prep_fn - build a scsi (read or write) command from * information in the request structure. * @SCpnt: pointer to mid-level's per scsi command structure that * contains request and into which the scsi command is written @@ -711,7 +711,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) ret = BLKPREP_KILL; SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt, - "sd_init_command: block=%llu, " + "sd_prep_fn: block=%llu, " "count=%d\n", (unsigned long long)block, this_count)); @@ -1212,9 +1212,14 @@ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) retval = -ENODEV; if (scsi_block_when_processing_errors(sdp)) { + retval = scsi_autopm_get_device(sdp); + if (retval) + goto out; + sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES, sshdr); + scsi_autopm_put_device(sdp); } /* failed to execute TUR, assume media not present */ @@ -2644,8 +2649,8 @@ static void sd_probe_async(void *data, async_cookie_t cookie) * (e.g. /dev/sda). More precisely it is the block device major * and minor number that is chosen here. * - * Assume sd_attach is not re-entrant (for time being) - * Also think about sd_attach() and sd_remove() running coincidentally. + * Assume sd_probe is not re-entrant (for time being) + * Also think about sd_probe() and sd_remove() running coincidentally. **/ static int sd_probe(struct device *dev) { @@ -2660,7 +2665,7 @@ static int sd_probe(struct device *dev) goto out; SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp, - "sd_attach\n")); + "sd_probe\n")); error = -ENOMEM; sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 9262cdf..e41998c 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -42,7 +42,6 @@ static const char *verstr = "20101219"; #include <asm/uaccess.h> #include <asm/dma.h> -#include <asm/system.h> #include <scsi/scsi.h> #include <scsi/scsi_dbg.h> @@ -1106,6 +1105,12 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) STp->drv_buffer)); } STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0; + if (!STp->drv_buffer && STp->immediate_filemark) { + printk(KERN_WARNING + "%s: non-buffered tape: disabling writing immediate filemarks\n", + name); + STp->immediate_filemark = 0; + } } st_release_request(SRpnt); SRpnt = NULL; @@ -1314,6 +1319,8 @@ static int st_flush(struct file *filp, fl_owner_t id) memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_FILEMARKS; + if (STp->immediate_filemark) + cmd[1] = 1; cmd[4] = 1 + STp->two_fm; SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, @@ -2181,8 +2188,9 @@ static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm, char name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, STp->scsi2_logical); printk(KERN_INFO - "%s: sysv: %d nowait: %d sili: %d\n", name, STm->sysv, STp->immediate, - STp->sili); + "%s: sysv: %d nowait: %d sili: %d nowait_filemark: %d\n", + name, STm->sysv, STp->immediate, STp->sili, + STp->immediate_filemark); printk(KERN_INFO "%s: debugging: %d\n", name, debugging); } @@ -2224,6 +2232,7 @@ static int st_set_options(struct scsi_tape *STp, long options) STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0; STp->immediate = (options & MT_ST_NOWAIT) != 0; + STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0; STm->sysv = (options & MT_ST_SYSV) != 0; STp->sili = (options & MT_ST_SILI) != 0; DEB( debugging = (options & MT_ST_DEBUGGING) != 0; @@ -2255,6 +2264,8 @@ static int st_set_options(struct scsi_tape *STp, long options) STp->scsi2_logical = value; if ((options & MT_ST_NOWAIT) != 0) STp->immediate = value; + if ((options & MT_ST_NOWAIT_EOF) != 0) + STp->immediate_filemark = value; if ((options & MT_ST_SYSV) != 0) STm->sysv = value; if ((options & MT_ST_SILI) != 0) @@ -2714,7 +2725,8 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon cmd[0] = WRITE_FILEMARKS; if (cmd_in == MTWSM) cmd[1] = 2; - if (cmd_in == MTWEOFI) + if (cmd_in == MTWEOFI || + (cmd_in == MTWEOF && STp->immediate_filemark)) cmd[1] |= 1; cmd[2] = (arg >> 16); cmd[3] = (arg >> 8); @@ -4093,6 +4105,7 @@ static int st_probe(struct device *dev) tpnt->scsi2_logical = ST_SCSI2LOGICAL; tpnt->sili = ST_SILI; tpnt->immediate = ST_NOWAIT; + tpnt->immediate_filemark = 0; tpnt->default_drvbuffer = 0xff; /* No forced buffering */ tpnt->partition = 0; tpnt->new_partition = 0; @@ -4478,6 +4491,7 @@ st_options_show(struct device *dev, struct device_attribute *attr, char *buf) options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0; options |= STm->sysv ? MT_ST_SYSV : 0; options |= STp->immediate ? MT_ST_NOWAIT : 0; + options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0; options |= STp->sili ? MT_ST_SILI : 0; l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options); diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index f91a67c..ea35632 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -120,6 +120,7 @@ struct scsi_tape { unsigned char c_algo; /* compression algorithm */ unsigned char pos_unknown; /* after reset position unknown */ unsigned char sili; /* use SILI when reading in variable b mode */ + unsigned char immediate_filemark; /* write filemark immediately */ int tape_type; int long_timeout; /* timeout for commands known to take long time */ diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index baf7328..6e25889 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -63,7 +63,6 @@ #include <linux/blkdev.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sun3ints.h> #include <asm/dvma.h> diff --git a/drivers/scsi/sun3_scsi_vme.c b/drivers/scsi/sun3_scsi_vme.c index fbba78e..a3dd55d 100644 --- a/drivers/scsi/sun3_scsi_vme.c +++ b/drivers/scsi/sun3_scsi_vme.c @@ -25,7 +25,6 @@ #include <linux/blkdev.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/sun3ints.h> #include <asm/dvma.h> diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c index 012c86e..ac4eca6 100644 --- a/drivers/scsi/sym53c416.c +++ b/drivers/scsi/sym53c416.c @@ -37,7 +37,6 @@ #include <linux/proc_fs.h> #include <linux/spinlock.h> #include <asm/dma.h> -#include <asm/system.h> #include <asm/io.h> #include <linux/blkdev.h> #include <linux/isapnp.h> diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c index 041eaaa..d672d97 100644 --- a/drivers/scsi/t128.c +++ b/drivers/scsi/t128.c @@ -106,7 +106,6 @@ * $Log: t128.c,v $ */ -#include <asm/system.h> #include <linux/signal.h> #include <linux/io.h> #include <linux/blkdev.h> diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c index 90e104d..9c216e5 100644 --- a/drivers/scsi/u14-34f.c +++ b/drivers/scsi/u14-34f.c @@ -410,7 +410,6 @@ #include <linux/ioport.h> #include <linux/delay.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <linux/proc_fs.h> #include <linux/blkdev.h> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig new file mode 100644 index 0000000..8f27f9d --- /dev/null +++ b/drivers/scsi/ufs/Kconfig @@ -0,0 +1,49 @@ +# +# Kernel configuration file for the UFS Host Controller +# +# This code is based on drivers/scsi/ufs/Kconfig +# Copyright (C) 2011 Samsung Samsung India Software Operations +# +# Santosh Yaraganavi <santosh.sy@samsung.com> +# Vinayak Holikatti <h.vinayak@samsung.com> + +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# NO WARRANTY +# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +# solely responsible for determining the appropriateness of using and +# distributing the Program and assumes all risks associated with its +# exercise of rights under this Agreement, including but not limited to +# the risks and costs of program errors, damage to or loss of data, +# programs or equipment, and unavailability or interruption of operations. + +# DISCLAIMER OF LIABILITY +# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, +# USA. + +config SCSI_UFSHCD + tristate "Universal Flash Storage host controller driver" + depends on PCI && SCSI + ---help--- + This is a generic driver which supports PCIe UFS Host controllers. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile new file mode 100644 index 0000000..adf7895 --- /dev/null +++ b/drivers/scsi/ufs/Makefile @@ -0,0 +1,2 @@ +# UFSHCD makefile +obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h new file mode 100644 index 0000000..b207529 --- /dev/null +++ b/drivers/scsi/ufs/ufs.h @@ -0,0 +1,207 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufs.h + * Copyright (C) 2011-2012 Samsung India Software Operations + * + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef _UFS_H +#define _UFS_H + +#define MAX_CDB_SIZE 16 + +#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\ + ((byte3 << 24) | (byte2 << 16) |\ + (byte1 << 8) | (byte0)) + +/* + * UFS Protocol Information Unit related definitions + */ + +/* Task management functions */ +enum { + UFS_ABORT_TASK = 0x01, + UFS_ABORT_TASK_SET = 0x02, + UFS_CLEAR_TASK_SET = 0x04, + UFS_LOGICAL_RESET = 0x08, + UFS_QUERY_TASK = 0x80, + UFS_QUERY_TASK_SET = 0x81, +}; + +/* UTP UPIU Transaction Codes Initiator to Target */ +enum { + UPIU_TRANSACTION_NOP_OUT = 0x00, + UPIU_TRANSACTION_COMMAND = 0x01, + UPIU_TRANSACTION_DATA_OUT = 0x02, + UPIU_TRANSACTION_TASK_REQ = 0x04, + UPIU_TRANSACTION_QUERY_REQ = 0x26, +}; + +/* UTP UPIU Transaction Codes Target to Initiator */ +enum { + UPIU_TRANSACTION_NOP_IN = 0x20, + UPIU_TRANSACTION_RESPONSE = 0x21, + UPIU_TRANSACTION_DATA_IN = 0x22, + UPIU_TRANSACTION_TASK_RSP = 0x24, + UPIU_TRANSACTION_READY_XFER = 0x31, + UPIU_TRANSACTION_QUERY_RSP = 0x36, +}; + +/* UPIU Read/Write flags */ +enum { + UPIU_CMD_FLAGS_NONE = 0x00, + UPIU_CMD_FLAGS_WRITE = 0x20, + UPIU_CMD_FLAGS_READ = 0x40, +}; + +/* UPIU Task Attributes */ +enum { + UPIU_TASK_ATTR_SIMPLE = 0x00, + UPIU_TASK_ATTR_ORDERED = 0x01, + UPIU_TASK_ATTR_HEADQ = 0x02, + UPIU_TASK_ATTR_ACA = 0x03, +}; + +/* UTP QUERY Transaction Specific Fields OpCode */ +enum { + UPIU_QUERY_OPCODE_NOP = 0x0, + UPIU_QUERY_OPCODE_READ_DESC = 0x1, + UPIU_QUERY_OPCODE_WRITE_DESC = 0x2, + UPIU_QUERY_OPCODE_READ_ATTR = 0x3, + UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4, + UPIU_QUERY_OPCODE_READ_FLAG = 0x5, + UPIU_QUERY_OPCODE_SET_FLAG = 0x6, + UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7, + UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8, +}; + +/* UTP Transfer Request Command Type (CT) */ +enum { + UPIU_COMMAND_SET_TYPE_SCSI = 0x0, + UPIU_COMMAND_SET_TYPE_UFS = 0x1, + UPIU_COMMAND_SET_TYPE_QUERY = 0x2, +}; + +enum { + MASK_SCSI_STATUS = 0xFF, + MASK_TASK_RESPONSE = 0xFF00, + MASK_RSP_UPIU_RESULT = 0xFFFF, +}; + +/* Task management service response */ +enum { + UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00, + UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04, + UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08, + UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05, + UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09, +}; +/** + * struct utp_upiu_header - UPIU header structure + * @dword_0: UPIU header DW-0 + * @dword_1: UPIU header DW-1 + * @dword_2: UPIU header DW-2 + */ +struct utp_upiu_header { + u32 dword_0; + u32 dword_1; + u32 dword_2; +}; + +/** + * struct utp_upiu_cmd - Command UPIU structure + * @header: UPIU header structure DW-0 to DW-2 + * @data_transfer_len: Data Transfer Length DW-3 + * @cdb: Command Descriptor Block CDB DW-4 to DW-7 + */ +struct utp_upiu_cmd { + struct utp_upiu_header header; + u32 exp_data_transfer_len; + u8 cdb[MAX_CDB_SIZE]; +}; + +/** + * struct utp_upiu_rsp - Response UPIU structure + * @header: UPIU header DW-0 to DW-2 + * @residual_transfer_count: Residual transfer count DW-3 + * @reserved: Reserved double words DW-4 to DW-7 + * @sense_data_len: Sense data length DW-8 U16 + * @sense_data: Sense data field DW-8 to DW-12 + */ +struct utp_upiu_rsp { + struct utp_upiu_header header; + u32 residual_transfer_count; + u32 reserved[4]; + u16 sense_data_len; + u8 sense_data[18]; +}; + +/** + * struct utp_upiu_task_req - Task request UPIU structure + * @header - UPIU header structure DW0 to DW-2 + * @input_param1: Input parameter 1 DW-3 + * @input_param2: Input parameter 2 DW-4 + * @input_param3: Input parameter 3 DW-5 + * @reserved: Reserved double words DW-6 to DW-7 + */ +struct utp_upiu_task_req { + struct utp_upiu_header header; + u32 input_param1; + u32 input_param2; + u32 input_param3; + u32 reserved[2]; +}; + +/** + * struct utp_upiu_task_rsp - Task Management Response UPIU structure + * @header: UPIU header structure DW0-DW-2 + * @output_param1: Ouput parameter 1 DW3 + * @output_param2: Output parameter 2 DW4 + * @reserved: Reserved double words DW-5 to DW-7 + */ +struct utp_upiu_task_rsp { + struct utp_upiu_header header; + u32 output_param1; + u32 output_param2; + u32 reserved[3]; +}; + +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c new file mode 100644 index 0000000..52b96e8 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd.c @@ -0,0 +1,1978 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshcd.c + * Copyright (C) 2011-2012 Samsung India Software Operations + * + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <linux/bitops.h> + +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_dbg.h> +#include <scsi/scsi_eh.h> + +#include "ufs.h" +#include "ufshci.h" + +#define UFSHCD "ufshcd" +#define UFSHCD_DRIVER_VERSION "0.1" + +enum { + UFSHCD_MAX_CHANNEL = 0, + UFSHCD_MAX_ID = 1, + UFSHCD_MAX_LUNS = 8, + UFSHCD_CMD_PER_LUN = 32, + UFSHCD_CAN_QUEUE = 32, +}; + +/* UFSHCD states */ +enum { + UFSHCD_STATE_OPERATIONAL, + UFSHCD_STATE_RESET, + UFSHCD_STATE_ERROR, +}; + +/* Interrupt configuration options */ +enum { + UFSHCD_INT_DISABLE, + UFSHCD_INT_ENABLE, + UFSHCD_INT_CLEAR, +}; + +/* Interrupt aggregation options */ +enum { + INT_AGGR_RESET, + INT_AGGR_CONFIG, +}; + +/** + * struct uic_command - UIC command structure + * @command: UIC command + * @argument1: UIC command argument 1 + * @argument2: UIC command argument 2 + * @argument3: UIC command argument 3 + * @cmd_active: Indicate if UIC command is outstanding + * @result: UIC command result + */ +struct uic_command { + u32 command; + u32 argument1; + u32 argument2; + u32 argument3; + int cmd_active; + int result; +}; + +/** + * struct ufs_hba - per adapter private structure + * @mmio_base: UFSHCI base register address + * @ucdl_base_addr: UFS Command Descriptor base address + * @utrdl_base_addr: UTP Transfer Request Descriptor base address + * @utmrdl_base_addr: UTP Task Management Descriptor base address + * @ucdl_dma_addr: UFS Command Descriptor DMA address + * @utrdl_dma_addr: UTRDL DMA address + * @utmrdl_dma_addr: UTMRDL DMA address + * @host: Scsi_Host instance of the driver + * @pdev: PCI device handle + * @lrb: local reference block + * @outstanding_tasks: Bits representing outstanding task requests + * @outstanding_reqs: Bits representing outstanding transfer requests + * @capabilities: UFS Controller Capabilities + * @nutrs: Transfer Request Queue depth supported by controller + * @nutmrs: Task Management Queue depth supported by controller + * @active_uic_cmd: handle of active UIC command + * @ufshcd_tm_wait_queue: wait queue for task management + * @tm_condition: condition variable for task management + * @ufshcd_state: UFSHCD states + * @int_enable_mask: Interrupt Mask Bits + * @uic_workq: Work queue for UIC completion handling + * @feh_workq: Work queue for fatal controller error handling + * @errors: HBA errors + */ +struct ufs_hba { + void __iomem *mmio_base; + + /* Virtual memory reference */ + struct utp_transfer_cmd_desc *ucdl_base_addr; + struct utp_transfer_req_desc *utrdl_base_addr; + struct utp_task_req_desc *utmrdl_base_addr; + + /* DMA memory reference */ + dma_addr_t ucdl_dma_addr; + dma_addr_t utrdl_dma_addr; + dma_addr_t utmrdl_dma_addr; + + struct Scsi_Host *host; + struct pci_dev *pdev; + + struct ufshcd_lrb *lrb; + + unsigned long outstanding_tasks; + unsigned long outstanding_reqs; + + u32 capabilities; + int nutrs; + int nutmrs; + u32 ufs_version; + + struct uic_command active_uic_cmd; + wait_queue_head_t ufshcd_tm_wait_queue; + unsigned long tm_condition; + + u32 ufshcd_state; + u32 int_enable_mask; + + /* Work Queues */ + struct work_struct uic_workq; + struct work_struct feh_workq; + + /* HBA Errors */ + u32 errors; +}; + +/** + * struct ufshcd_lrb - local reference block + * @utr_descriptor_ptr: UTRD address of the command + * @ucd_cmd_ptr: UCD address of the command + * @ucd_rsp_ptr: Response UPIU address for this command + * @ucd_prdt_ptr: PRDT address of the command + * @cmd: pointer to SCSI command + * @sense_buffer: pointer to sense buffer address of the SCSI command + * @sense_bufflen: Length of the sense buffer + * @scsi_status: SCSI status of the command + * @command_type: SCSI, UFS, Query. + * @task_tag: Task tag of the command + * @lun: LUN of the command + */ +struct ufshcd_lrb { + struct utp_transfer_req_desc *utr_descriptor_ptr; + struct utp_upiu_cmd *ucd_cmd_ptr; + struct utp_upiu_rsp *ucd_rsp_ptr; + struct ufshcd_sg_entry *ucd_prdt_ptr; + + struct scsi_cmnd *cmd; + u8 *sense_buffer; + unsigned int sense_bufflen; + int scsi_status; + + int command_type; + int task_tag; + unsigned int lun; +}; + +/** + * ufshcd_get_ufs_version - Get the UFS version supported by the HBA + * @hba - Pointer to adapter instance + * + * Returns UFSHCI version supported by the controller + */ +static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba) +{ + return readl(hba->mmio_base + REG_UFS_VERSION); +} + +/** + * ufshcd_is_device_present - Check if any device connected to + * the host controller + * @reg_hcs - host controller status register value + * + * Returns 0 if device present, non-zero if no device detected + */ +static inline int ufshcd_is_device_present(u32 reg_hcs) +{ + return (DEVICE_PRESENT & reg_hcs) ? 0 : -1; +} + +/** + * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status + * @lrb: pointer to local command reference block + * + * This function is used to get the OCS field from UTRD + * Returns the OCS field in the UTRD + */ +static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) +{ + return lrbp->utr_descriptor_ptr->header.dword_2 & MASK_OCS; +} + +/** + * ufshcd_get_tmr_ocs - Get the UTMRD Overall Command Status + * @task_req_descp: pointer to utp_task_req_desc structure + * + * This function is used to get the OCS field from UTMRD + * Returns the OCS field in the UTMRD + */ +static inline int +ufshcd_get_tmr_ocs(struct utp_task_req_desc *task_req_descp) +{ + return task_req_descp->header.dword_2 & MASK_OCS; +} + +/** + * ufshcd_get_tm_free_slot - get a free slot for task management request + * @hba: per adapter instance + * + * Returns maximum number of task management request slots in case of + * task management queue full or returns the free slot number + */ +static inline int ufshcd_get_tm_free_slot(struct ufs_hba *hba) +{ + return find_first_zero_bit(&hba->outstanding_tasks, hba->nutmrs); +} + +/** + * ufshcd_utrl_clear - Clear a bit in UTRLCLR register + * @hba: per adapter instance + * @pos: position of the bit to be cleared + */ +static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) +{ + writel(~(1 << pos), + (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_CLEAR)); +} + +/** + * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY + * @reg: Register value of host controller status + * + * Returns integer, 0 on Success and positive value if failed + */ +static inline int ufshcd_get_lists_status(u32 reg) +{ + /* + * The mask 0xFF is for the following HCS register bits + * Bit Description + * 0 Device Present + * 1 UTRLRDY + * 2 UTMRLRDY + * 3 UCRDY + * 4 HEI + * 5 DEI + * 6-7 reserved + */ + return (((reg) & (0xFF)) >> 1) ^ (0x07); +} + +/** + * ufshcd_get_uic_cmd_result - Get the UIC command result + * @hba: Pointer to adapter instance + * + * This function gets the result of UIC command completion + * Returns 0 on success, non zero value on error + */ +static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba) +{ + return readl(hba->mmio_base + REG_UIC_COMMAND_ARG_2) & + MASK_UIC_COMMAND_RESULT; +} + +/** + * ufshcd_free_hba_memory - Free allocated memory for LRB, request + * and task lists + * @hba: Pointer to adapter instance + */ +static inline void ufshcd_free_hba_memory(struct ufs_hba *hba) +{ + size_t utmrdl_size, utrdl_size, ucdl_size; + + kfree(hba->lrb); + + if (hba->utmrdl_base_addr) { + utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; + dma_free_coherent(&hba->pdev->dev, utmrdl_size, + hba->utmrdl_base_addr, hba->utmrdl_dma_addr); + } + + if (hba->utrdl_base_addr) { + utrdl_size = + (sizeof(struct utp_transfer_req_desc) * hba->nutrs); + dma_free_coherent(&hba->pdev->dev, utrdl_size, + hba->utrdl_base_addr, hba->utrdl_dma_addr); + } + + if (hba->ucdl_base_addr) { + ucdl_size = + (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); + dma_free_coherent(&hba->pdev->dev, ucdl_size, + hba->ucdl_base_addr, hba->ucdl_dma_addr); + } +} + +/** + * ufshcd_is_valid_req_rsp - checks if controller TR response is valid + * @ucd_rsp_ptr: pointer to response UPIU + * + * This function checks the response UPIU for valid transaction type in + * response field + * Returns 0 on success, non-zero on failure + */ +static inline int +ufshcd_is_valid_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return ((be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24) == + UPIU_TRANSACTION_RESPONSE) ? 0 : DID_ERROR << 16; +} + +/** + * ufshcd_get_rsp_upiu_result - Get the result from response UPIU + * @ucd_rsp_ptr: pointer to response UPIU + * + * This function gets the response status and scsi_status from response UPIU + * Returns the response result code. + */ +static inline int +ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT; +} + +/** + * ufshcd_config_int_aggr - Configure interrupt aggregation values. + * Currently there is no use case where we want to configure + * interrupt aggregation dynamically. So to configure interrupt + * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and + * INT_AGGR_TIMEOUT_VALUE are used. + * @hba: per adapter instance + * @option: Interrupt aggregation option + */ +static inline void +ufshcd_config_int_aggr(struct ufs_hba *hba, int option) +{ + switch (option) { + case INT_AGGR_RESET: + writel((INT_AGGR_ENABLE | + INT_AGGR_COUNTER_AND_TIMER_RESET), + (hba->mmio_base + + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL)); + break; + case INT_AGGR_CONFIG: + writel((INT_AGGR_ENABLE | + INT_AGGR_PARAM_WRITE | + INT_AGGR_COUNTER_THRESHOLD_VALUE | + INT_AGGR_TIMEOUT_VALUE), + (hba->mmio_base + + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL)); + break; + } +} + +/** + * ufshcd_enable_run_stop_reg - Enable run-stop registers, + * When run-stop registers are set to 1, it indicates the + * host controller that it can process the requests + * @hba: per adapter instance + */ +static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) +{ + writel(UTP_TASK_REQ_LIST_RUN_STOP_BIT, + (hba->mmio_base + + REG_UTP_TASK_REQ_LIST_RUN_STOP)); + writel(UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, + (hba->mmio_base + + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP)); +} + +/** + * ufshcd_hba_stop - Send controller to reset state + * @hba: per adapter instance + */ +static inline void ufshcd_hba_stop(struct ufs_hba *hba) +{ + writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE)); +} + +/** + * ufshcd_hba_start - Start controller initialization sequence + * @hba: per adapter instance + */ +static inline void ufshcd_hba_start(struct ufs_hba *hba) +{ + writel(CONTROLLER_ENABLE , (hba->mmio_base + REG_CONTROLLER_ENABLE)); +} + +/** + * ufshcd_is_hba_active - Get controller state + * @hba: per adapter instance + * + * Returns zero if controller is active, 1 otherwise + */ +static inline int ufshcd_is_hba_active(struct ufs_hba *hba) +{ + return (readl(hba->mmio_base + REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1; +} + +/** + * ufshcd_send_command - Send SCSI or device management commands + * @hba: per adapter instance + * @task_tag: Task tag of the command + */ +static inline +void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag) +{ + __set_bit(task_tag, &hba->outstanding_reqs); + writel((1 << task_tag), + (hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL)); +} + +/** + * ufshcd_copy_sense_data - Copy sense data in case of check condition + * @lrb - pointer to local reference block + */ +static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp) +{ + int len; + if (lrbp->sense_buffer) { + len = be16_to_cpu(lrbp->ucd_rsp_ptr->sense_data_len); + memcpy(lrbp->sense_buffer, + lrbp->ucd_rsp_ptr->sense_data, + min_t(int, len, SCSI_SENSE_BUFFERSIZE)); + } +} + +/** + * ufshcd_hba_capabilities - Read controller capabilities + * @hba: per adapter instance + */ +static inline void ufshcd_hba_capabilities(struct ufs_hba *hba) +{ + hba->capabilities = + readl(hba->mmio_base + REG_CONTROLLER_CAPABILITIES); + + /* nutrs and nutmrs are 0 based values */ + hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1; + hba->nutmrs = + ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1; +} + +/** + * ufshcd_send_uic_command - Send UIC commands to unipro layers + * @hba: per adapter instance + * @uic_command: UIC command + */ +static inline void +ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd) +{ + /* Write Args */ + writel(uic_cmnd->argument1, + (hba->mmio_base + REG_UIC_COMMAND_ARG_1)); + writel(uic_cmnd->argument2, + (hba->mmio_base + REG_UIC_COMMAND_ARG_2)); + writel(uic_cmnd->argument3, + (hba->mmio_base + REG_UIC_COMMAND_ARG_3)); + + /* Write UIC Cmd */ + writel((uic_cmnd->command & COMMAND_OPCODE_MASK), + (hba->mmio_base + REG_UIC_COMMAND)); +} + +/** + * ufshcd_map_sg - Map scatter-gather list to prdt + * @lrbp - pointer to local reference block + * + * Returns 0 in case of success, non-zero value in case of failure + */ +static int ufshcd_map_sg(struct ufshcd_lrb *lrbp) +{ + struct ufshcd_sg_entry *prd_table; + struct scatterlist *sg; + struct scsi_cmnd *cmd; + int sg_segments; + int i; + + cmd = lrbp->cmd; + sg_segments = scsi_dma_map(cmd); + if (sg_segments < 0) + return sg_segments; + + if (sg_segments) { + lrbp->utr_descriptor_ptr->prd_table_length = + cpu_to_le16((u16) (sg_segments)); + + prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr; + + scsi_for_each_sg(cmd, sg, sg_segments, i) { + prd_table[i].size = + cpu_to_le32(((u32) sg_dma_len(sg))-1); + prd_table[i].base_addr = + cpu_to_le32(lower_32_bits(sg->dma_address)); + prd_table[i].upper_addr = + cpu_to_le32(upper_32_bits(sg->dma_address)); + } + } else { + lrbp->utr_descriptor_ptr->prd_table_length = 0; + } + + return 0; +} + +/** + * ufshcd_int_config - enable/disable interrupts + * @hba: per adapter instance + * @option: interrupt option + */ +static void ufshcd_int_config(struct ufs_hba *hba, u32 option) +{ + switch (option) { + case UFSHCD_INT_ENABLE: + writel(hba->int_enable_mask, + (hba->mmio_base + REG_INTERRUPT_ENABLE)); + break; + case UFSHCD_INT_DISABLE: + if (hba->ufs_version == UFSHCI_VERSION_10) + writel(INTERRUPT_DISABLE_MASK_10, + (hba->mmio_base + REG_INTERRUPT_ENABLE)); + else + writel(INTERRUPT_DISABLE_MASK_11, + (hba->mmio_base + REG_INTERRUPT_ENABLE)); + break; + } +} + +/** + * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU) + * @lrb - pointer to local reference block + */ +static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp) +{ + struct utp_transfer_req_desc *req_desc; + struct utp_upiu_cmd *ucd_cmd_ptr; + u32 data_direction; + u32 upiu_flags; + + ucd_cmd_ptr = lrbp->ucd_cmd_ptr; + req_desc = lrbp->utr_descriptor_ptr; + + switch (lrbp->command_type) { + case UTP_CMD_TYPE_SCSI: + if (lrbp->cmd->sc_data_direction == DMA_FROM_DEVICE) { + data_direction = UTP_DEVICE_TO_HOST; + upiu_flags = UPIU_CMD_FLAGS_READ; + } else if (lrbp->cmd->sc_data_direction == DMA_TO_DEVICE) { + data_direction = UTP_HOST_TO_DEVICE; + upiu_flags = UPIU_CMD_FLAGS_WRITE; + } else { + data_direction = UTP_NO_DATA_TRANSFER; + upiu_flags = UPIU_CMD_FLAGS_NONE; + } + + /* Transfer request descriptor header fields */ + req_desc->header.dword_0 = + cpu_to_le32(data_direction | UTP_SCSI_COMMAND); + + /* + * assigning invalid value for command status. Controller + * updates OCS on command completion, with the command + * status + */ + req_desc->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + + /* command descriptor fields */ + ucd_cmd_ptr->header.dword_0 = + cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND, + upiu_flags, + lrbp->lun, + lrbp->task_tag)); + ucd_cmd_ptr->header.dword_1 = + cpu_to_be32( + UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI, + 0, + 0, + 0)); + + /* Total EHS length and Data segment length will be zero */ + ucd_cmd_ptr->header.dword_2 = 0; + + ucd_cmd_ptr->exp_data_transfer_len = + cpu_to_be32(lrbp->cmd->transfersize); + + memcpy(ucd_cmd_ptr->cdb, + lrbp->cmd->cmnd, + (min_t(unsigned short, + lrbp->cmd->cmd_len, + MAX_CDB_SIZE))); + break; + case UTP_CMD_TYPE_DEV_MANAGE: + /* For query function implementation */ + break; + case UTP_CMD_TYPE_UFS: + /* For UFS native command implementation */ + break; + } /* end of switch */ +} + +/** + * ufshcd_queuecommand - main entry point for SCSI requests + * @cmd: command from SCSI Midlayer + * @done: call back function + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) +{ + struct ufshcd_lrb *lrbp; + struct ufs_hba *hba; + unsigned long flags; + int tag; + int err = 0; + + hba = shost_priv(host); + + tag = cmd->request->tag; + + if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) { + err = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + + lrbp = &hba->lrb[tag]; + + lrbp->cmd = cmd; + lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE; + lrbp->sense_buffer = cmd->sense_buffer; + lrbp->task_tag = tag; + lrbp->lun = cmd->device->lun; + + lrbp->command_type = UTP_CMD_TYPE_SCSI; + + /* form UPIU before issuing the command */ + ufshcd_compose_upiu(lrbp); + err = ufshcd_map_sg(lrbp); + if (err) + goto out; + + /* issue command to the controller */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_send_command(hba, tag); + spin_unlock_irqrestore(hba->host->host_lock, flags); +out: + return err; +} + +/** + * ufshcd_memory_alloc - allocate memory for host memory space data structures + * @hba: per adapter instance + * + * 1. Allocate DMA memory for Command Descriptor array + * Each command descriptor consist of Command UPIU, Response UPIU and PRDT + * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL). + * 3. Allocate DMA memory for UTP Task Management Request Descriptor List + * (UTMRDL) + * 4. Allocate memory for local reference block(lrb). + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_memory_alloc(struct ufs_hba *hba) +{ + size_t utmrdl_size, utrdl_size, ucdl_size; + + /* Allocate memory for UTP command descriptors */ + ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); + hba->ucdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + ucdl_size, + &hba->ucdl_dma_addr, + GFP_KERNEL); + + /* + * UFSHCI requires UTP command descriptor to be 128 byte aligned. + * make sure hba->ucdl_dma_addr is aligned to PAGE_SIZE + * if hba->ucdl_dma_addr is aligned to PAGE_SIZE, then it will + * be aligned to 128 bytes as well + */ + if (!hba->ucdl_base_addr || + WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(&hba->pdev->dev, + "Command Descriptor Memory allocation failed\n"); + goto out; + } + + /* + * Allocate memory for UTP Transfer descriptors + * UFSHCI requires 1024 byte alignment of UTRD + */ + utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs); + hba->utrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + utrdl_size, + &hba->utrdl_dma_addr, + GFP_KERNEL); + if (!hba->utrdl_base_addr || + WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(&hba->pdev->dev, + "Transfer Descriptor Memory allocation failed\n"); + goto out; + } + + /* + * Allocate memory for UTP Task Management descriptors + * UFSHCI requires 1024 byte alignment of UTMRD + */ + utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; + hba->utmrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev, + utmrdl_size, + &hba->utmrdl_dma_addr, + GFP_KERNEL); + if (!hba->utmrdl_base_addr || + WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(&hba->pdev->dev, + "Task Management Descriptor Memory allocation failed\n"); + goto out; + } + + /* Allocate memory for local reference block */ + hba->lrb = kcalloc(hba->nutrs, sizeof(struct ufshcd_lrb), GFP_KERNEL); + if (!hba->lrb) { + dev_err(&hba->pdev->dev, "LRB Memory allocation failed\n"); + goto out; + } + return 0; +out: + ufshcd_free_hba_memory(hba); + return -ENOMEM; +} + +/** + * ufshcd_host_memory_configure - configure local reference block with + * memory offsets + * @hba: per adapter instance + * + * Configure Host memory space + * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA + * address. + * 2. Update each UTRD with Response UPIU offset, Response UPIU length + * and PRDT offset. + * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT + * into local reference block. + */ +static void ufshcd_host_memory_configure(struct ufs_hba *hba) +{ + struct utp_transfer_cmd_desc *cmd_descp; + struct utp_transfer_req_desc *utrdlp; + dma_addr_t cmd_desc_dma_addr; + dma_addr_t cmd_desc_element_addr; + u16 response_offset; + u16 prdt_offset; + int cmd_desc_size; + int i; + + utrdlp = hba->utrdl_base_addr; + cmd_descp = hba->ucdl_base_addr; + + response_offset = + offsetof(struct utp_transfer_cmd_desc, response_upiu); + prdt_offset = + offsetof(struct utp_transfer_cmd_desc, prd_table); + + cmd_desc_size = sizeof(struct utp_transfer_cmd_desc); + cmd_desc_dma_addr = hba->ucdl_dma_addr; + + for (i = 0; i < hba->nutrs; i++) { + /* Configure UTRD with command descriptor base address */ + cmd_desc_element_addr = + (cmd_desc_dma_addr + (cmd_desc_size * i)); + utrdlp[i].command_desc_base_addr_lo = + cpu_to_le32(lower_32_bits(cmd_desc_element_addr)); + utrdlp[i].command_desc_base_addr_hi = + cpu_to_le32(upper_32_bits(cmd_desc_element_addr)); + + /* Response upiu and prdt offset should be in double words */ + utrdlp[i].response_upiu_offset = + cpu_to_le16((response_offset >> 2)); + utrdlp[i].prd_table_offset = + cpu_to_le16((prdt_offset >> 2)); + utrdlp[i].response_upiu_length = + cpu_to_le16(ALIGNED_UPIU_SIZE); + + hba->lrb[i].utr_descriptor_ptr = (utrdlp + i); + hba->lrb[i].ucd_cmd_ptr = + (struct utp_upiu_cmd *)(cmd_descp + i); + hba->lrb[i].ucd_rsp_ptr = + (struct utp_upiu_rsp *)cmd_descp[i].response_upiu; + hba->lrb[i].ucd_prdt_ptr = + (struct ufshcd_sg_entry *)cmd_descp[i].prd_table; + } +} + +/** + * ufshcd_dme_link_startup - Notify Unipro to perform link startup + * @hba: per adapter instance + * + * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer, + * in order to initialize the Unipro link startup procedure. + * Once the Unipro links are up, the device connected to the controller + * is detected. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dme_link_startup(struct ufs_hba *hba) +{ + struct uic_command *uic_cmd; + unsigned long flags; + + /* check if controller is ready to accept UIC commands */ + if (((readl(hba->mmio_base + REG_CONTROLLER_STATUS)) & + UIC_COMMAND_READY) == 0x0) { + dev_err(&hba->pdev->dev, + "Controller not ready" + " to accept UIC commands\n"); + return -EIO; + } + + spin_lock_irqsave(hba->host->host_lock, flags); + + /* form UIC command */ + uic_cmd = &hba->active_uic_cmd; + uic_cmd->command = UIC_CMD_DME_LINK_STARTUP; + uic_cmd->argument1 = 0; + uic_cmd->argument2 = 0; + uic_cmd->argument3 = 0; + + /* enable UIC related interrupts */ + hba->int_enable_mask |= UIC_COMMAND_COMPL; + ufshcd_int_config(hba, UFSHCD_INT_ENABLE); + + /* sending UIC commands to controller */ + ufshcd_send_uic_command(hba, uic_cmd); + spin_unlock_irqrestore(hba->host->host_lock, flags); + return 0; +} + +/** + * ufshcd_make_hba_operational - Make UFS controller operational + * @hba: per adapter instance + * + * To bring UFS host controller to operational state, + * 1. Check if device is present + * 2. Configure run-stop-registers + * 3. Enable required interrupts + * 4. Configure interrupt aggregation + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_make_hba_operational(struct ufs_hba *hba) +{ + int err = 0; + u32 reg; + + /* check if device present */ + reg = readl((hba->mmio_base + REG_CONTROLLER_STATUS)); + if (ufshcd_is_device_present(reg)) { + dev_err(&hba->pdev->dev, "cc: Device not present\n"); + err = -ENXIO; + goto out; + } + + /* + * UCRDY, UTMRLDY and UTRLRDY bits must be 1 + * DEI, HEI bits must be 0 + */ + if (!(ufshcd_get_lists_status(reg))) { + ufshcd_enable_run_stop_reg(hba); + } else { + dev_err(&hba->pdev->dev, + "Host controller not ready to process requests"); + err = -EIO; + goto out; + } + + /* Enable required interrupts */ + hba->int_enable_mask |= (UTP_TRANSFER_REQ_COMPL | + UIC_ERROR | + UTP_TASK_REQ_COMPL | + DEVICE_FATAL_ERROR | + CONTROLLER_FATAL_ERROR | + SYSTEM_BUS_FATAL_ERROR); + ufshcd_int_config(hba, UFSHCD_INT_ENABLE); + + /* Configure interrupt aggregation */ + ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG); + + if (hba->ufshcd_state == UFSHCD_STATE_RESET) + scsi_unblock_requests(hba->host); + + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + scsi_scan_host(hba->host); +out: + return err; +} + +/** + * ufshcd_hba_enable - initialize the controller + * @hba: per adapter instance + * + * The controller resets itself and controller firmware initialization + * sequence kicks off. When controller is ready it will set + * the Host Controller Enable bit to 1. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_hba_enable(struct ufs_hba *hba) +{ + int retry; + + /* + * msleep of 1 and 5 used in this function might result in msleep(20), + * but it was necessary to send the UFS FPGA to reset mode during + * development and testing of this driver. msleep can be changed to + * mdelay and retry count can be reduced based on the controller. + */ + if (!ufshcd_is_hba_active(hba)) { + + /* change controller state to "reset state" */ + ufshcd_hba_stop(hba); + + /* + * This delay is based on the testing done with UFS host + * controller FPGA. The delay can be changed based on the + * host controller used. + */ + msleep(5); + } + + /* start controller initialization sequence */ + ufshcd_hba_start(hba); + + /* + * To initialize a UFS host controller HCE bit must be set to 1. + * During initialization the HCE bit value changes from 1->0->1. + * When the host controller completes initialization sequence + * it sets the value of HCE bit to 1. The same HCE bit is read back + * to check if the controller has completed initialization sequence. + * So without this delay the value HCE = 1, set in the previous + * instruction might be read back. + * This delay can be changed based on the controller. + */ + msleep(1); + + /* wait for the host controller to complete initialization */ + retry = 10; + while (ufshcd_is_hba_active(hba)) { + if (retry) { + retry--; + } else { + dev_err(&hba->pdev->dev, + "Controller enable failed\n"); + return -EIO; + } + msleep(5); + } + return 0; +} + +/** + * ufshcd_initialize_hba - start the initialization process + * @hba: per adapter instance + * + * 1. Enable the controller via ufshcd_hba_enable. + * 2. Program the Transfer Request List Address with the starting address of + * UTRDL. + * 3. Program the Task Management Request List Address with starting address + * of UTMRDL. + * + * Returns 0 on success, non-zero value on failure. + */ +static int ufshcd_initialize_hba(struct ufs_hba *hba) +{ + if (ufshcd_hba_enable(hba)) + return -EIO; + + /* Configure UTRL and UTMRL base address registers */ + writel(hba->utrdl_dma_addr, + (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L)); + writel(lower_32_bits(hba->utrdl_dma_addr), + (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_H)); + writel(hba->utmrdl_dma_addr, + (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_L)); + writel(upper_32_bits(hba->utmrdl_dma_addr), + (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_H)); + + /* Initialize unipro link startup procedure */ + return ufshcd_dme_link_startup(hba); +} + +/** + * ufshcd_do_reset - reset the host controller + * @hba: per adapter instance + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_do_reset(struct ufs_hba *hba) +{ + struct ufshcd_lrb *lrbp; + unsigned long flags; + int tag; + + /* block commands from midlayer */ + scsi_block_requests(hba->host); + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->ufshcd_state = UFSHCD_STATE_RESET; + + /* send controller to reset state */ + ufshcd_hba_stop(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* abort outstanding commands */ + for (tag = 0; tag < hba->nutrs; tag++) { + if (test_bit(tag, &hba->outstanding_reqs)) { + lrbp = &hba->lrb[tag]; + scsi_dma_unmap(lrbp->cmd); + lrbp->cmd->result = DID_RESET << 16; + lrbp->cmd->scsi_done(lrbp->cmd); + lrbp->cmd = NULL; + } + } + + /* clear outstanding request/task bit maps */ + hba->outstanding_reqs = 0; + hba->outstanding_tasks = 0; + + /* start the initialization process */ + if (ufshcd_initialize_hba(hba)) { + dev_err(&hba->pdev->dev, + "Reset: Controller initialization failed\n"); + return FAILED; + } + return SUCCESS; +} + +/** + * ufshcd_slave_alloc - handle initial SCSI device configurations + * @sdev: pointer to SCSI device + * + * Returns success + */ +static int ufshcd_slave_alloc(struct scsi_device *sdev) +{ + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + sdev->tagged_supported = 1; + + /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */ + sdev->use_10_for_ms = 1; + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); + + /* + * Inform SCSI Midlayer that the LUN queue depth is same as the + * controller queue depth. If a LUN queue depth is less than the + * controller queue depth and if the LUN reports + * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted + * with scsi_adjust_queue_depth. + */ + scsi_activate_tcq(sdev, hba->nutrs); + return 0; +} + +/** + * ufshcd_slave_destroy - remove SCSI device configurations + * @sdev: pointer to SCSI device + */ +static void ufshcd_slave_destroy(struct scsi_device *sdev) +{ + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + scsi_deactivate_tcq(sdev, hba->nutrs); +} + +/** + * ufshcd_task_req_compl - handle task management request completion + * @hba: per adapter instance + * @index: index of the completed request + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index) +{ + struct utp_task_req_desc *task_req_descp; + struct utp_upiu_task_rsp *task_rsp_upiup; + unsigned long flags; + int ocs_value; + int task_result; + + spin_lock_irqsave(hba->host->host_lock, flags); + + /* Clear completed tasks from outstanding_tasks */ + __clear_bit(index, &hba->outstanding_tasks); + + task_req_descp = hba->utmrdl_base_addr; + ocs_value = ufshcd_get_tmr_ocs(&task_req_descp[index]); + + if (ocs_value == OCS_SUCCESS) { + task_rsp_upiup = (struct utp_upiu_task_rsp *) + task_req_descp[index].task_rsp_upiu; + task_result = be32_to_cpu(task_rsp_upiup->header.dword_1); + task_result = ((task_result & MASK_TASK_RESPONSE) >> 8); + + if (task_result != UPIU_TASK_MANAGEMENT_FUNC_COMPL || + task_result != UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) + task_result = FAILED; + } else { + task_result = FAILED; + dev_err(&hba->pdev->dev, + "trc: Invalid ocs = %x\n", ocs_value); + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + return task_result; +} + +/** + * ufshcd_adjust_lun_qdepth - Update LUN queue depth if device responds with + * SAM_STAT_TASK_SET_FULL SCSI command status. + * @cmd: pointer to SCSI command + */ +static void ufshcd_adjust_lun_qdepth(struct scsi_cmnd *cmd) +{ + struct ufs_hba *hba; + int i; + int lun_qdepth = 0; + + hba = shost_priv(cmd->device->host); + + /* + * LUN queue depth can be obtained by counting outstanding commands + * on the LUN. + */ + for (i = 0; i < hba->nutrs; i++) { + if (test_bit(i, &hba->outstanding_reqs)) { + + /* + * Check if the outstanding command belongs + * to the LUN which reported SAM_STAT_TASK_SET_FULL. + */ + if (cmd->device->lun == hba->lrb[i].lun) + lun_qdepth++; + } + } + + /* + * LUN queue depth will be total outstanding commands, except the + * command for which the LUN reported SAM_STAT_TASK_SET_FULL. + */ + scsi_adjust_queue_depth(cmd->device, MSG_SIMPLE_TAG, lun_qdepth - 1); +} + +/** + * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status + * @lrb: pointer to local reference block of completed command + * @scsi_status: SCSI command status + * + * Returns value base on SCSI command status + */ +static inline int +ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status) +{ + int result = 0; + + switch (scsi_status) { + case SAM_STAT_GOOD: + result |= DID_OK << 16 | + COMMAND_COMPLETE << 8 | + SAM_STAT_GOOD; + break; + case SAM_STAT_CHECK_CONDITION: + result |= DID_OK << 16 | + COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + ufshcd_copy_sense_data(lrbp); + break; + case SAM_STAT_BUSY: + result |= SAM_STAT_BUSY; + break; + case SAM_STAT_TASK_SET_FULL: + + /* + * If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue + * depth needs to be adjusted to the exact number of + * outstanding commands the LUN can handle at any given time. + */ + ufshcd_adjust_lun_qdepth(lrbp->cmd); + result |= SAM_STAT_TASK_SET_FULL; + break; + case SAM_STAT_TASK_ABORTED: + result |= SAM_STAT_TASK_ABORTED; + break; + default: + result |= DID_ERROR << 16; + break; + } /* end of switch */ + + return result; +} + +/** + * ufshcd_transfer_rsp_status - Get overall status of the response + * @hba: per adapter instance + * @lrb: pointer to local reference block of completed command + * + * Returns result of the command to notify SCSI midlayer + */ +static inline int +ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + int result = 0; + int scsi_status; + int ocs; + + /* overall command status of utrd */ + ocs = ufshcd_get_tr_ocs(lrbp); + + switch (ocs) { + case OCS_SUCCESS: + + /* check if the returned transfer response is valid */ + result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr); + if (result) { + dev_err(&hba->pdev->dev, + "Invalid response = %x\n", result); + break; + } + + /* + * get the response UPIU result to extract + * the SCSI command status + */ + result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr); + + /* + * get the result based on SCSI status response + * to notify the SCSI midlayer of the command status + */ + scsi_status = result & MASK_SCSI_STATUS; + result = ufshcd_scsi_cmd_status(lrbp, scsi_status); + break; + case OCS_ABORTED: + result |= DID_ABORT << 16; + break; + case OCS_INVALID_CMD_TABLE_ATTR: + case OCS_INVALID_PRDT_ATTR: + case OCS_MISMATCH_DATA_BUF_SIZE: + case OCS_MISMATCH_RESP_UPIU_SIZE: + case OCS_PEER_COMM_FAILURE: + case OCS_FATAL_ERROR: + default: + result |= DID_ERROR << 16; + dev_err(&hba->pdev->dev, + "OCS error from controller = %x\n", ocs); + break; + } /* end of switch */ + + return result; +} + +/** + * ufshcd_transfer_req_compl - handle SCSI and query command completion + * @hba: per adapter instance + */ +static void ufshcd_transfer_req_compl(struct ufs_hba *hba) +{ + struct ufshcd_lrb *lrb; + unsigned long completed_reqs; + u32 tr_doorbell; + int result; + int index; + + lrb = hba->lrb; + tr_doorbell = + readl(hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL); + completed_reqs = tr_doorbell ^ hba->outstanding_reqs; + + for (index = 0; index < hba->nutrs; index++) { + if (test_bit(index, &completed_reqs)) { + + result = ufshcd_transfer_rsp_status(hba, &lrb[index]); + + if (lrb[index].cmd) { + scsi_dma_unmap(lrb[index].cmd); + lrb[index].cmd->result = result; + lrb[index].cmd->scsi_done(lrb[index].cmd); + + /* Mark completed command as NULL in LRB */ + lrb[index].cmd = NULL; + } + } /* end of if */ + } /* end of for */ + + /* clear corresponding bits of completed commands */ + hba->outstanding_reqs ^= completed_reqs; + + /* Reset interrupt aggregation counters */ + ufshcd_config_int_aggr(hba, INT_AGGR_RESET); +} + +/** + * ufshcd_uic_cc_handler - handle UIC command completion + * @work: pointer to a work queue structure + * + * Returns 0 on success, non-zero value on failure + */ +static void ufshcd_uic_cc_handler (struct work_struct *work) +{ + struct ufs_hba *hba; + + hba = container_of(work, struct ufs_hba, uic_workq); + + if ((hba->active_uic_cmd.command == UIC_CMD_DME_LINK_STARTUP) && + !(ufshcd_get_uic_cmd_result(hba))) { + + if (ufshcd_make_hba_operational(hba)) + dev_err(&hba->pdev->dev, + "cc: hba not operational state\n"); + return; + } +} + +/** + * ufshcd_fatal_err_handler - handle fatal errors + * @hba: per adapter instance + */ +static void ufshcd_fatal_err_handler(struct work_struct *work) +{ + struct ufs_hba *hba; + hba = container_of(work, struct ufs_hba, feh_workq); + + /* check if reset is already in progress */ + if (hba->ufshcd_state != UFSHCD_STATE_RESET) + ufshcd_do_reset(hba); +} + +/** + * ufshcd_err_handler - Check for fatal errors + * @work: pointer to a work queue structure + */ +static void ufshcd_err_handler(struct ufs_hba *hba) +{ + u32 reg; + + if (hba->errors & INT_FATAL_ERRORS) + goto fatal_eh; + + if (hba->errors & UIC_ERROR) { + + reg = readl(hba->mmio_base + + REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER); + if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT) + goto fatal_eh; + } + return; +fatal_eh: + hba->ufshcd_state = UFSHCD_STATE_ERROR; + schedule_work(&hba->feh_workq); +} + +/** + * ufshcd_tmc_handler - handle task management function completion + * @hba: per adapter instance + */ +static void ufshcd_tmc_handler(struct ufs_hba *hba) +{ + u32 tm_doorbell; + + tm_doorbell = readl(hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL); + hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks; + wake_up_interruptible(&hba->ufshcd_tm_wait_queue); +} + +/** + * ufshcd_sl_intr - Interrupt service routine + * @hba: per adapter instance + * @intr_status: contains interrupts generated by the controller + */ +static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) +{ + hba->errors = UFSHCD_ERROR_MASK & intr_status; + if (hba->errors) + ufshcd_err_handler(hba); + + if (intr_status & UIC_COMMAND_COMPL) + schedule_work(&hba->uic_workq); + + if (intr_status & UTP_TASK_REQ_COMPL) + ufshcd_tmc_handler(hba); + + if (intr_status & UTP_TRANSFER_REQ_COMPL) + ufshcd_transfer_req_compl(hba); +} + +/** + * ufshcd_intr - Main interrupt service routine + * @irq: irq number + * @__hba: pointer to adapter instance + * + * Returns IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_intr(int irq, void *__hba) +{ + u32 intr_status; + irqreturn_t retval = IRQ_NONE; + struct ufs_hba *hba = __hba; + + spin_lock(hba->host->host_lock); + intr_status = readl(hba->mmio_base + REG_INTERRUPT_STATUS); + + if (intr_status) { + ufshcd_sl_intr(hba, intr_status); + + /* If UFSHCI 1.0 then clear interrupt status register */ + if (hba->ufs_version == UFSHCI_VERSION_10) + writel(intr_status, + (hba->mmio_base + REG_INTERRUPT_STATUS)); + retval = IRQ_HANDLED; + } + spin_unlock(hba->host->host_lock); + return retval; +} + +/** + * ufshcd_issue_tm_cmd - issues task management commands to controller + * @hba: per adapter instance + * @lrbp: pointer to local reference block + * + * Returns SUCCESS/FAILED + */ +static int +ufshcd_issue_tm_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, + u8 tm_function) +{ + struct utp_task_req_desc *task_req_descp; + struct utp_upiu_task_req *task_req_upiup; + struct Scsi_Host *host; + unsigned long flags; + int free_slot = 0; + int err; + + host = hba->host; + + spin_lock_irqsave(host->host_lock, flags); + + /* If task management queue is full */ + free_slot = ufshcd_get_tm_free_slot(hba); + if (free_slot >= hba->nutmrs) { + spin_unlock_irqrestore(host->host_lock, flags); + dev_err(&hba->pdev->dev, "Task management queue full\n"); + err = FAILED; + goto out; + } + + task_req_descp = hba->utmrdl_base_addr; + task_req_descp += free_slot; + + /* Configure task request descriptor */ + task_req_descp->header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD); + task_req_descp->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + + /* Configure task request UPIU */ + task_req_upiup = + (struct utp_upiu_task_req *) task_req_descp->task_req_upiu; + task_req_upiup->header.dword_0 = + cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0, + lrbp->lun, lrbp->task_tag)); + task_req_upiup->header.dword_1 = + cpu_to_be32(UPIU_HEADER_DWORD(0, tm_function, 0, 0)); + + task_req_upiup->input_param1 = lrbp->lun; + task_req_upiup->input_param1 = + cpu_to_be32(task_req_upiup->input_param1); + task_req_upiup->input_param2 = lrbp->task_tag; + task_req_upiup->input_param2 = + cpu_to_be32(task_req_upiup->input_param2); + + /* send command to the controller */ + __set_bit(free_slot, &hba->outstanding_tasks); + writel((1 << free_slot), + (hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL)); + + spin_unlock_irqrestore(host->host_lock, flags); + + /* wait until the task management command is completed */ + err = + wait_event_interruptible_timeout(hba->ufshcd_tm_wait_queue, + (test_bit(free_slot, + &hba->tm_condition) != 0), + 60 * HZ); + if (!err) { + dev_err(&hba->pdev->dev, + "Task management command timed-out\n"); + err = FAILED; + goto out; + } + clear_bit(free_slot, &hba->tm_condition); + return ufshcd_task_req_compl(hba, free_slot); +out: + return err; +} + +/** + * ufshcd_device_reset - reset device and abort all the pending commands + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_device_reset(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + unsigned int tag; + u32 pos; + int err; + + host = cmd->device->host; + hba = shost_priv(host); + tag = cmd->request->tag; + + err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_LOGICAL_RESET); + if (err) + goto out; + + for (pos = 0; pos < hba->nutrs; pos++) { + if (test_bit(pos, &hba->outstanding_reqs) && + (hba->lrb[tag].lun == hba->lrb[pos].lun)) { + + /* clear the respective UTRLCLR register bit */ + ufshcd_utrl_clear(hba, pos); + + clear_bit(pos, &hba->outstanding_reqs); + + if (hba->lrb[pos].cmd) { + scsi_dma_unmap(hba->lrb[pos].cmd); + hba->lrb[pos].cmd->result = + DID_ABORT << 16; + hba->lrb[pos].cmd->scsi_done(cmd); + hba->lrb[pos].cmd = NULL; + } + } + } /* end of for */ +out: + return err; +} + +/** + * ufshcd_host_reset - Main reset function registered with scsi layer + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_host_reset(struct scsi_cmnd *cmd) +{ + struct ufs_hba *hba; + + hba = shost_priv(cmd->device->host); + + if (hba->ufshcd_state == UFSHCD_STATE_RESET) + return SUCCESS; + + return (ufshcd_do_reset(hba) == SUCCESS) ? SUCCESS : FAILED; +} + +/** + * ufshcd_abort - abort a specific command + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + unsigned long flags; + unsigned int tag; + int err; + + host = cmd->device->host; + hba = shost_priv(host); + tag = cmd->request->tag; + + spin_lock_irqsave(host->host_lock, flags); + + /* check if command is still pending */ + if (!(test_bit(tag, &hba->outstanding_reqs))) { + err = FAILED; + spin_unlock_irqrestore(host->host_lock, flags); + goto out; + } + spin_unlock_irqrestore(host->host_lock, flags); + + err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_ABORT_TASK); + if (err) + goto out; + + scsi_dma_unmap(cmd); + + spin_lock_irqsave(host->host_lock, flags); + + /* clear the respective UTRLCLR register bit */ + ufshcd_utrl_clear(hba, tag); + + __clear_bit(tag, &hba->outstanding_reqs); + hba->lrb[tag].cmd = NULL; + spin_unlock_irqrestore(host->host_lock, flags); +out: + return err; +} + +static struct scsi_host_template ufshcd_driver_template = { + .module = THIS_MODULE, + .name = UFSHCD, + .proc_name = UFSHCD, + .queuecommand = ufshcd_queuecommand, + .slave_alloc = ufshcd_slave_alloc, + .slave_destroy = ufshcd_slave_destroy, + .eh_abort_handler = ufshcd_abort, + .eh_device_reset_handler = ufshcd_device_reset, + .eh_host_reset_handler = ufshcd_host_reset, + .this_id = -1, + .sg_tablesize = SG_ALL, + .cmd_per_lun = UFSHCD_CMD_PER_LUN, + .can_queue = UFSHCD_CAN_QUEUE, +}; + +/** + * ufshcd_shutdown - main function to put the controller in reset state + * @pdev: pointer to PCI device handle + */ +static void ufshcd_shutdown(struct pci_dev *pdev) +{ + ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); +} + +#ifdef CONFIG_PM +/** + * ufshcd_suspend - suspend power management function + * @pdev: pointer to PCI device handle + * @state: power state + * + * Returns -ENOSYS + */ +static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state) +{ + /* + * TODO: + * 1. Block SCSI requests from SCSI midlayer + * 2. Change the internal driver state to non operational + * 3. Set UTRLRSR and UTMRLRSR bits to zero + * 4. Wait until outstanding commands are completed + * 5. Set HCE to zero to send the UFS host controller to reset state + */ + + return -ENOSYS; +} + +/** + * ufshcd_resume - resume power management function + * @pdev: pointer to PCI device handle + * + * Returns -ENOSYS + */ +static int ufshcd_resume(struct pci_dev *pdev) +{ + /* + * TODO: + * 1. Set HCE to 1, to start the UFS host controller + * initialization process + * 2. Set UTRLRSR and UTMRLRSR bits to 1 + * 3. Change the internal driver state to operational + * 4. Unblock SCSI requests from SCSI midlayer + */ + + return -ENOSYS; +} +#endif /* CONFIG_PM */ + +/** + * ufshcd_hba_free - free allocated memory for + * host memory space data structures + * @hba: per adapter instance + */ +static void ufshcd_hba_free(struct ufs_hba *hba) +{ + iounmap(hba->mmio_base); + ufshcd_free_hba_memory(hba); + pci_release_regions(hba->pdev); +} + +/** + * ufshcd_remove - de-allocate PCI/SCSI host and host memory space + * data structure memory + * @pdev - pointer to PCI handle + */ +static void ufshcd_remove(struct pci_dev *pdev) +{ + struct ufs_hba *hba = pci_get_drvdata(pdev); + + /* disable interrupts */ + ufshcd_int_config(hba, UFSHCD_INT_DISABLE); + free_irq(pdev->irq, hba); + + ufshcd_hba_stop(hba); + ufshcd_hba_free(hba); + + scsi_remove_host(hba->host); + scsi_host_put(hba->host); + pci_set_drvdata(pdev, NULL); + pci_clear_master(pdev); + pci_disable_device(pdev); +} + +/** + * ufshcd_set_dma_mask - Set dma mask based on the controller + * addressing capability + * @pdev: PCI device structure + * + * Returns 0 for success, non-zero for failure + */ +static int ufshcd_set_dma_mask(struct ufs_hba *hba) +{ + int err; + u64 dma_mask; + + /* + * If controller supports 64 bit addressing mode, then set the DMA + * mask to 64-bit, else set the DMA mask to 32-bit + */ + if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) + dma_mask = DMA_BIT_MASK(64); + else + dma_mask = DMA_BIT_MASK(32); + + err = pci_set_dma_mask(hba->pdev, dma_mask); + if (err) + return err; + + err = pci_set_consistent_dma_mask(hba->pdev, dma_mask); + + return err; +} + +/** + * ufshcd_probe - probe routine of the driver + * @pdev: pointer to PCI device handle + * @id: PCI device id + * + * Returns 0 on success, non-zero value on failure + */ +static int __devinit +ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + int err; + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pci_enable_device failed\n"); + goto out_error; + } + + pci_set_master(pdev); + + host = scsi_host_alloc(&ufshcd_driver_template, + sizeof(struct ufs_hba)); + if (!host) { + dev_err(&pdev->dev, "scsi_host_alloc failed\n"); + err = -ENOMEM; + goto out_disable; + } + hba = shost_priv(host); + + err = pci_request_regions(pdev, UFSHCD); + if (err < 0) { + dev_err(&pdev->dev, "request regions failed\n"); + goto out_disable; + } + + hba->mmio_base = pci_ioremap_bar(pdev, 0); + if (!hba->mmio_base) { + dev_err(&pdev->dev, "memory map failed\n"); + err = -ENOMEM; + goto out_release_regions; + } + + hba->host = host; + hba->pdev = pdev; + + /* Read capabilities registers */ + ufshcd_hba_capabilities(hba); + + /* Get UFS version supported by the controller */ + hba->ufs_version = ufshcd_get_ufs_version(hba); + + err = ufshcd_set_dma_mask(hba); + if (err) { + dev_err(&pdev->dev, "set dma mask failed\n"); + goto out_iounmap; + } + + /* Allocate memory for host memory space */ + err = ufshcd_memory_alloc(hba); + if (err) { + dev_err(&pdev->dev, "Memory allocation failed\n"); + goto out_iounmap; + } + + /* Configure LRB */ + ufshcd_host_memory_configure(hba); + + host->can_queue = hba->nutrs; + host->cmd_per_lun = hba->nutrs; + host->max_id = UFSHCD_MAX_ID; + host->max_lun = UFSHCD_MAX_LUNS; + host->max_channel = UFSHCD_MAX_CHANNEL; + host->unique_id = host->host_no; + host->max_cmd_len = MAX_CDB_SIZE; + + /* Initailize wait queue for task management */ + init_waitqueue_head(&hba->ufshcd_tm_wait_queue); + + /* Initialize work queues */ + INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler); + INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler); + + /* IRQ registration */ + err = request_irq(pdev->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); + if (err) { + dev_err(&pdev->dev, "request irq failed\n"); + goto out_lrb_free; + } + + /* Enable SCSI tag mapping */ + err = scsi_init_shared_tag_map(host, host->can_queue); + if (err) { + dev_err(&pdev->dev, "init shared queue failed\n"); + goto out_free_irq; + } + + pci_set_drvdata(pdev, hba); + + err = scsi_add_host(host, &pdev->dev); + if (err) { + dev_err(&pdev->dev, "scsi_add_host failed\n"); + goto out_free_irq; + } + + /* Initialization routine */ + err = ufshcd_initialize_hba(hba); + if (err) { + dev_err(&pdev->dev, "Initialization failed\n"); + goto out_free_irq; + } + + return 0; + +out_free_irq: + free_irq(pdev->irq, hba); +out_lrb_free: + ufshcd_free_hba_memory(hba); +out_iounmap: + iounmap(hba->mmio_base); +out_release_regions: + pci_release_regions(pdev); +out_disable: + scsi_host_put(host); + pci_clear_master(pdev); + pci_disable_device(pdev); +out_error: + return err; +} + +static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = { + { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl); + +static struct pci_driver ufshcd_pci_driver = { + .name = UFSHCD, + .id_table = ufshcd_pci_tbl, + .probe = ufshcd_probe, + .remove = __devexit_p(ufshcd_remove), + .shutdown = ufshcd_shutdown, +#ifdef CONFIG_PM + .suspend = ufshcd_suspend, + .resume = ufshcd_resume, +#endif +}; + +/** + * ufshcd_init - Driver registration routine + */ +static int __init ufshcd_init(void) +{ + return pci_register_driver(&ufshcd_pci_driver); +} +module_init(ufshcd_init); + +/** + * ufshcd_exit - Driver exit clean-up routine + */ +static void __exit ufshcd_exit(void) +{ + pci_unregister_driver(&ufshcd_pci_driver); +} +module_exit(ufshcd_exit); + + +MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>, " + "Vinayak Holikatti <h.vinayak@samsung.com>"); +MODULE_DESCRIPTION("Generic UFS host controller driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h new file mode 100644 index 0000000..6e3510f --- /dev/null +++ b/drivers/scsi/ufs/ufshci.h @@ -0,0 +1,376 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshci.h + * Copyright (C) 2011-2012 Samsung India Software Operations + * + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef _UFSHCI_H +#define _UFSHCI_H + +enum { + TASK_REQ_UPIU_SIZE_DWORDS = 8, + TASK_RSP_UPIU_SIZE_DWORDS = 8, + ALIGNED_UPIU_SIZE = 128, +}; + +/* UFSHCI Registers */ +enum { + REG_CONTROLLER_CAPABILITIES = 0x00, + REG_UFS_VERSION = 0x08, + REG_CONTROLLER_DEV_ID = 0x10, + REG_CONTROLLER_PROD_ID = 0x14, + REG_INTERRUPT_STATUS = 0x20, + REG_INTERRUPT_ENABLE = 0x24, + REG_CONTROLLER_STATUS = 0x30, + REG_CONTROLLER_ENABLE = 0x34, + REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38, + REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C, + REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40, + REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44, + REG_UIC_ERROR_CODE_DME = 0x48, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C, + REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50, + REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54, + REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58, + REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60, + REG_UTP_TASK_REQ_LIST_BASE_L = 0x70, + REG_UTP_TASK_REQ_LIST_BASE_H = 0x74, + REG_UTP_TASK_REQ_DOOR_BELL = 0x78, + REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C, + REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80, + REG_UIC_COMMAND = 0x90, + REG_UIC_COMMAND_ARG_1 = 0x94, + REG_UIC_COMMAND_ARG_2 = 0x98, + REG_UIC_COMMAND_ARG_3 = 0x9C, +}; + +/* Controller capability masks */ +enum { + MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F, + MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000, + MASK_64_ADDRESSING_SUPPORT = 0x01000000, + MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000, + MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000, +}; + +/* UFS Version 08h */ +#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0) +#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16) + +/* Controller UFSHCI version */ +enum { + UFSHCI_VERSION_10 = 0x00010000, + UFSHCI_VERSION_11 = 0x00010100, +}; + +/* + * HCDDID - Host Controller Identification Descriptor + * - Device ID and Device Class 10h + */ +#define DEVICE_CLASS UFS_MASK(0xFFFF, 0) +#define DEVICE_ID UFS_MASK(0xFF, 24) + +/* + * HCPMID - Host Controller Identification Descriptor + * - Product/Manufacturer ID 14h + */ +#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0) +#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16) + +#define UFS_BIT(x) (1L << (x)) + +#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0) +#define UIC_DME_END_PT_RESET UFS_BIT(1) +#define UIC_ERROR UFS_BIT(2) +#define UIC_TEST_MODE UFS_BIT(3) +#define UIC_POWER_MODE UFS_BIT(4) +#define UIC_HIBERNATE_EXIT UFS_BIT(5) +#define UIC_HIBERNATE_ENTER UFS_BIT(6) +#define UIC_LINK_LOST UFS_BIT(7) +#define UIC_LINK_STARTUP UFS_BIT(8) +#define UTP_TASK_REQ_COMPL UFS_BIT(9) +#define UIC_COMMAND_COMPL UFS_BIT(10) +#define DEVICE_FATAL_ERROR UFS_BIT(11) +#define CONTROLLER_FATAL_ERROR UFS_BIT(16) +#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17) + +#define UFSHCD_ERROR_MASK (UIC_ERROR |\ + DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +/* HCS - Host Controller Status 30h */ +#define DEVICE_PRESENT UFS_BIT(0) +#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1) +#define UTP_TASK_REQ_LIST_READY UFS_BIT(2) +#define UIC_COMMAND_READY UFS_BIT(3) +#define HOST_ERROR_INDICATOR UFS_BIT(4) +#define DEVICE_ERROR_INDICATOR UFS_BIT(5) +#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8) + +/* HCE - Host Controller Enable 34h */ +#define CONTROLLER_ENABLE UFS_BIT(0) +#define CONTROLLER_DISABLE 0x0 + +/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */ +#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31) +#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F + +/* UECDL - Host UIC Error Code Data Link Layer 3Ch */ +#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31) +#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF +#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000 + +/* UECN - Host UIC Error Code Network Layer 40h */ +#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31) +#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7 + +/* UECT - Host UIC Error Code Transport Layer 44h */ +#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31) +#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F + +/* UECDME - Host UIC Error Code DME 48h */ +#define UIC_DME_ERROR UFS_BIT(31) +#define UIC_DME_ERROR_CODE_MASK 0x1 + +#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF +#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8) +#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16) +#define INT_AGGR_STATUS_BIT UFS_BIT(20) +#define INT_AGGR_PARAM_WRITE UFS_BIT(24) +#define INT_AGGR_ENABLE UFS_BIT(31) + +/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */ +#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0) + +/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */ +#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0) + +/* UICCMD - UIC Command */ +#define COMMAND_OPCODE_MASK 0xFF +#define GEN_SELECTOR_INDEX_MASK 0xFFFF + +#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16) +#define RESET_LEVEL 0xFF + +#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16) +#define CONFIG_RESULT_CODE_MASK 0xFF +#define GENERIC_ERROR_CODE_MASK 0xFF + +/* UIC Commands */ +enum { + UIC_CMD_DME_GET = 0x01, + UIC_CMD_DME_SET = 0x02, + UIC_CMD_DME_PEER_GET = 0x03, + UIC_CMD_DME_PEER_SET = 0x04, + UIC_CMD_DME_POWERON = 0x10, + UIC_CMD_DME_POWEROFF = 0x11, + UIC_CMD_DME_ENABLE = 0x12, + UIC_CMD_DME_RESET = 0x14, + UIC_CMD_DME_END_PT_RST = 0x15, + UIC_CMD_DME_LINK_STARTUP = 0x16, + UIC_CMD_DME_HIBER_ENTER = 0x17, + UIC_CMD_DME_HIBER_EXIT = 0x18, + UIC_CMD_DME_TEST_MODE = 0x1A, +}; + +/* UIC Config result code / Generic error code */ +enum { + UIC_CMD_RESULT_SUCCESS = 0x00, + UIC_CMD_RESULT_INVALID_ATTR = 0x01, + UIC_CMD_RESULT_FAILURE = 0x01, + UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02, + UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03, + UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04, + UIC_CMD_RESULT_BAD_INDEX = 0x05, + UIC_CMD_RESULT_LOCKED_ATTR = 0x06, + UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07, + UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08, + UIC_CMD_RESULT_BUSY = 0x09, + UIC_CMD_RESULT_DME_FAILURE = 0x0A, +}; + +#define MASK_UIC_COMMAND_RESULT 0xFF + +#define INT_AGGR_COUNTER_THRESHOLD_VALUE (0x1F << 8) +#define INT_AGGR_TIMEOUT_VALUE (0x02) + +/* Interrupt disable masks */ +enum { + /* Interrupt disable mask for UFSHCI v1.0 */ + INTERRUPT_DISABLE_MASK_10 = 0xFFFF, + + /* Interrupt disable mask for UFSHCI v1.1 */ + INTERRUPT_DISABLE_MASK_11 = 0x0, +}; + +/* + * Request Descriptor Definitions + */ + +/* Transfer request command type */ +enum { + UTP_CMD_TYPE_SCSI = 0x0, + UTP_CMD_TYPE_UFS = 0x1, + UTP_CMD_TYPE_DEV_MANAGE = 0x2, +}; + +enum { + UTP_SCSI_COMMAND = 0x00000000, + UTP_NATIVE_UFS_COMMAND = 0x10000000, + UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000, + UTP_REQ_DESC_INT_CMD = 0x01000000, +}; + +/* UTP Transfer Request Data Direction (DD) */ +enum { + UTP_NO_DATA_TRANSFER = 0x00000000, + UTP_HOST_TO_DEVICE = 0x02000000, + UTP_DEVICE_TO_HOST = 0x04000000, +}; + +/* Overall command status values */ +enum { + OCS_SUCCESS = 0x0, + OCS_INVALID_CMD_TABLE_ATTR = 0x1, + OCS_INVALID_PRDT_ATTR = 0x2, + OCS_MISMATCH_DATA_BUF_SIZE = 0x3, + OCS_MISMATCH_RESP_UPIU_SIZE = 0x4, + OCS_PEER_COMM_FAILURE = 0x5, + OCS_ABORTED = 0x6, + OCS_FATAL_ERROR = 0x7, + OCS_INVALID_COMMAND_STATUS = 0x0F, + MASK_OCS = 0x0F, +}; + +/** + * struct ufshcd_sg_entry - UFSHCI PRD Entry + * @base_addr: Lower 32bit physical address DW-0 + * @upper_addr: Upper 32bit physical address DW-1 + * @reserved: Reserved for future use DW-2 + * @size: size of physical segment DW-3 + */ +struct ufshcd_sg_entry { + u32 base_addr; + u32 upper_addr; + u32 reserved; + u32 size; +}; + +/** + * struct utp_transfer_cmd_desc - UFS Command Descriptor structure + * @command_upiu: Command UPIU Frame address + * @response_upiu: Response UPIU Frame address + * @prd_table: Physical Region Descriptor + */ +struct utp_transfer_cmd_desc { + u8 command_upiu[ALIGNED_UPIU_SIZE]; + u8 response_upiu[ALIGNED_UPIU_SIZE]; + struct ufshcd_sg_entry prd_table[SG_ALL]; +}; + +/** + * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD + * @dword0: Descriptor Header DW0 + * @dword1: Descriptor Header DW1 + * @dword2: Descriptor Header DW2 + * @dword3: Descriptor Header DW3 + */ +struct request_desc_header { + u32 dword_0; + u32 dword_1; + u32 dword_2; + u32 dword_3; +}; + +/** + * struct utp_transfer_req_desc - UTRD structure + * @header: UTRD header DW-0 to DW-3 + * @command_desc_base_addr_lo: UCD base address low DW-4 + * @command_desc_base_addr_hi: UCD base address high DW-5 + * @response_upiu_length: response UPIU length DW-6 + * @response_upiu_offset: response UPIU offset DW-6 + * @prd_table_length: Physical region descriptor length DW-7 + * @prd_table_offset: Physical region descriptor offset DW-7 + */ +struct utp_transfer_req_desc { + + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-5*/ + u32 command_desc_base_addr_lo; + u32 command_desc_base_addr_hi; + + /* DW 6 */ + u16 response_upiu_length; + u16 response_upiu_offset; + + /* DW 7 */ + u16 prd_table_length; + u16 prd_table_offset; +}; + +/** + * struct utp_task_req_desc - UTMRD structure + * @header: UTMRD header DW-0 to DW-3 + * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11 + * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19 + */ +struct utp_task_req_desc { + + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-11 */ + u32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS]; + + /* DW 12-19 */ + u32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS]; +}; + +#endif /* End of Header */ diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c index 7e22b73..14e0c40 100644 --- a/drivers/scsi/ultrastor.c +++ b/drivers/scsi/ultrastor.c @@ -141,7 +141,6 @@ #include <linux/delay.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/dma.h> #define ULTRASTOR_PRIVATE /* Get the private stuff from ultrastor.h */ diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 7264116..4411d42 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * - * Maintained by: Alok N Kataria <akataria@vmware.com> + * Maintained by: Arvind Kumar <arvindkumar@vmware.com> * */ @@ -1178,11 +1178,67 @@ static int __devinit pvscsi_allocate_sg(struct pvscsi_adapter *adapter) return 0; } +/* + * Query the device, fetch the config info and return the + * maximum number of targets on the adapter. In case of + * failure due to any reason return default i.e. 16. + */ +static u32 pvscsi_get_max_targets(struct pvscsi_adapter *adapter) +{ + struct PVSCSICmdDescConfigCmd cmd; + struct PVSCSIConfigPageHeader *header; + struct device *dev; + dma_addr_t configPagePA; + void *config_page; + u32 numPhys = 16; + + dev = pvscsi_dev(adapter); + config_page = pci_alloc_consistent(adapter->dev, PAGE_SIZE, + &configPagePA); + if (!config_page) { + dev_warn(dev, "vmw_pvscsi: failed to allocate memory for config page\n"); + goto exit; + } + BUG_ON(configPagePA & ~PAGE_MASK); + + /* Fetch config info from the device. */ + cmd.configPageAddress = ((u64)PVSCSI_CONFIG_CONTROLLER_ADDRESS) << 32; + cmd.configPageNum = PVSCSI_CONFIG_PAGE_CONTROLLER; + cmd.cmpAddr = configPagePA; + cmd._pad = 0; + + /* + * Mark the completion page header with error values. If the device + * completes the command successfully, it sets the status values to + * indicate success. + */ + header = config_page; + memset(header, 0, sizeof *header); + header->hostStatus = BTSTAT_INVPARAM; + header->scsiStatus = SDSTAT_CHECK; + + pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_CONFIG, &cmd, sizeof cmd); + + if (header->hostStatus == BTSTAT_SUCCESS && + header->scsiStatus == SDSTAT_GOOD) { + struct PVSCSIConfigPageController *config; + + config = config_page; + numPhys = config->numPhys; + } else + dev_warn(dev, "vmw_pvscsi: PVSCSI_CMD_CONFIG failed. hostStatus = 0x%x, scsiStatus = 0x%x\n", + header->hostStatus, header->scsiStatus); + pci_free_consistent(adapter->dev, PAGE_SIZE, config_page, configPagePA); +exit: + return numPhys; +} + static int __devinit pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct pvscsi_adapter *adapter; struct Scsi_Host *host; + struct device *dev; unsigned int i; unsigned long flags = 0; int error; @@ -1272,6 +1328,13 @@ static int __devinit pvscsi_probe(struct pci_dev *pdev, } /* + * Ask the device for max number of targets. + */ + host->max_id = pvscsi_get_max_targets(adapter); + dev = pvscsi_dev(adapter); + dev_info(dev, "vmw_pvscsi: host->max_id: %u\n", host->max_id); + + /* * From this point on we should reset the adapter if anything goes * wrong. */ diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h index 62e36e7..3546e86 100644 --- a/drivers/scsi/vmw_pvscsi.h +++ b/drivers/scsi/vmw_pvscsi.h @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * - * Maintained by: Alok N Kataria <akataria@vmware.com> + * Maintained by: Arvind Kumar <arvindkumar@vmware.com> * */ @@ -26,7 +26,7 @@ #include <linux/types.h> -#define PVSCSI_DRIVER_VERSION_STRING "1.0.1.0-k" +#define PVSCSI_DRIVER_VERSION_STRING "1.0.2.0-k" #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128 @@ -39,28 +39,45 @@ * host adapter status/error codes */ enum HostBusAdapterStatus { - BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ - BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, - BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, - BTSTAT_DATA_UNDERRUN = 0x0c, - BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ - BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ - BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ - BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence requested by target */ - BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from first CCB */ - BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ - BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message rejected by target */ - BTSTAT_BADMSG = 0x1d, /* unsupported message received by the host adapter */ - BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ - BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, sent a SCSI RST */ - BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ - BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI RST */ - BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly (w/o tag) */ - BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ - BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ - BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ - BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ - BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ + BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ + BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, + BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, + BTSTAT_DATA_UNDERRUN = 0x0c, + BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ + BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ + BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ + BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence + * requested by target */ + BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from + * first CCB */ + BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment + * list */ + BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ + BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message + * rejected by target */ + BTSTAT_BADMSG = 0x1d, /* unsupported message received by the + * host adapter */ + BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ + BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, + * sent a SCSI RST */ + BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ + BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI + * RST */ + BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly + * (w/o tag) */ + BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ + BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ + BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ + BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ + BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ +}; + +/* + * SCSI device status values. + */ +enum ScsiDeviceStatus { + SDSTAT_GOOD = 0x00, /* No errors. */ + SDSTAT_CHECK = 0x02, /* Check condition. */ }; /* @@ -114,6 +131,29 @@ struct PVSCSICmdDescResetDevice { } __packed; /* + * Command descriptor for PVSCSI_CMD_CONFIG -- + */ + +struct PVSCSICmdDescConfigCmd { + u64 cmpAddr; + u64 configPageAddress; + u32 configPageNum; + u32 _pad; +} __packed; + +enum PVSCSIConfigPageType { + PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958, + PVSCSI_CONFIG_PAGE_PHY = 0x1959, + PVSCSI_CONFIG_PAGE_DEVICE = 0x195a, +}; + +enum PVSCSIConfigPageAddressType { + PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120, + PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121, + PVSCSI_CONFIG_PHY_ADDRESS = 0x2122, +}; + +/* * Command descriptor for PVSCSI_CMD_ABORT_CMD -- * * - currently does not support specifying the LUN. @@ -332,6 +372,27 @@ struct PVSCSIRingCmpDesc { u32 _pad[2]; } __packed; +struct PVSCSIConfigPageHeader { + u32 pageNum; + u16 numDwords; + u16 hostStatus; + u16 scsiStatus; + u16 reserved[3]; +} __packed; + +struct PVSCSIConfigPageController { + struct PVSCSIConfigPageHeader header; + u64 nodeWWN; /* Device name as defined in the SAS spec. */ + u16 manufacturer[64]; + u16 serialNumber[64]; + u16 opromVersion[32]; + u16 hwVersion[32]; + u16 firmwareVersion[32]; + u32 numPhys; + u8 useConsecutivePhyWWNs; + u8 reserved[3]; +} __packed; + /* * Interrupt status / IRQ bits. */ diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c index 9ee0afe..d89a5df 100644 --- a/drivers/scsi/wd7000.c +++ b/drivers/scsi/wd7000.c @@ -179,7 +179,6 @@ #include <linux/stat.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/dma.h> #include <scsi/scsi.h> diff --git a/drivers/sh/intc/balancing.c b/drivers/sh/intc/balancing.c index cec7a96..bc78080 100644 --- a/drivers/sh/intc/balancing.c +++ b/drivers/sh/intc/balancing.c @@ -9,7 +9,7 @@ */ #include "internals.h" -static unsigned long dist_handle[NR_IRQS]; +static unsigned long dist_handle[INTC_NR_IRQS]; void intc_balancing_enable(unsigned int irq) { diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index 7b246ef..012df26 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -2,13 +2,14 @@ * IRQ chip definitions for INTC IRQs. * * Copyright (C) 2007, 2008 Magnus Damm - * Copyright (C) 2009, 2010 Paul Mundt + * Copyright (C) 2009 - 2012 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include <linux/cpumask.h> +#include <linux/bsearch.h> #include <linux/io.h> #include "internals.h" @@ -58,11 +59,6 @@ static void intc_disable(struct irq_data *data) } } -static int intc_set_wake(struct irq_data *data, unsigned int on) -{ - return 0; /* allow wakeup, but setup hardware in intc_suspend() */ -} - #ifdef CONFIG_SMP /* * This is held with the irq desc lock held, so we don't require any @@ -78,7 +74,7 @@ static int intc_set_affinity(struct irq_data *data, cpumask_copy(data->affinity, cpumask); - return 0; + return IRQ_SET_MASK_OK_NOCOPY; } #endif @@ -122,28 +118,12 @@ static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp, unsigned int nr_hp, unsigned int irq) { - int i; - - /* - * this doesn't scale well, but... - * - * this function should only be used for cerain uncommon - * operations such as intc_set_priority() and intc_set_type() - * and in those rare cases performance doesn't matter that much. - * keeping the memory footprint low is more important. - * - * one rather simple way to speed this up and still keep the - * memory footprint down is to make sure the array is sorted - * and then perform a bisect to lookup the irq. - */ - for (i = 0; i < nr_hp; i++) { - if ((hp + i)->irq != irq) - continue; + struct intc_handle_int key; - return hp + i; - } + key.irq = irq; + key.handle = 0; - return NULL; + return bsearch(&key, hp, nr_hp, sizeof(*hp), intc_handle_int_cmp); } int intc_set_priority(unsigned int irq, unsigned int prio) @@ -223,10 +203,9 @@ struct irq_chip intc_irq_chip = { .irq_mask_ack = intc_mask_ack, .irq_enable = intc_enable, .irq_disable = intc_disable, - .irq_shutdown = intc_disable, .irq_set_type = intc_set_type, - .irq_set_wake = intc_set_wake, #ifdef CONFIG_SMP .irq_set_affinity = intc_set_affinity, #endif + .flags = IRQCHIP_SKIP_SET_WAKE, }; diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index e53e449..7e562cc 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -2,7 +2,7 @@ * Shared interrupt handling code for IPR and INTC2 types of IRQs. * * Copyright (C) 2007, 2008 Magnus Damm - * Copyright (C) 2009, 2010 Paul Mundt + * Copyright (C) 2009 - 2012 Paul Mundt * * Based on intc2.c and ipr.c * @@ -31,18 +31,19 @@ #include <linux/spinlock.h> #include <linux/radix-tree.h> #include <linux/export.h> +#include <linux/sort.h> #include "internals.h" LIST_HEAD(intc_list); DEFINE_RAW_SPINLOCK(intc_big_lock); -unsigned int nr_intc_controllers; +static unsigned int nr_intc_controllers; /* * Default priority level * - this needs to be at least 2 for 5-bit priorities on 7780 */ static unsigned int default_prio_level = 2; /* 2 - 16 */ -static unsigned int intc_prio_level[NR_IRQS]; /* for now */ +static unsigned int intc_prio_level[INTC_NR_IRQS]; /* for now */ unsigned int intc_get_dfl_prio_level(void) { @@ -267,6 +268,9 @@ int __init register_intc_controller(struct intc_desc *desc) k += save_reg(d, k, hw->prio_regs[i].set_reg, smp); k += save_reg(d, k, hw->prio_regs[i].clr_reg, smp); } + + sort(d->prio, hw->nr_prio_regs, sizeof(*d->prio), + intc_handle_int_cmp, NULL); } if (hw->sense_regs) { @@ -277,6 +281,9 @@ int __init register_intc_controller(struct intc_desc *desc) for (i = 0; i < hw->nr_sense_regs; i++) k += save_reg(d, k, hw->sense_regs[i].reg, 0); + + sort(d->sense, hw->nr_sense_regs, sizeof(*d->sense), + intc_handle_int_cmp, NULL); } if (hw->subgroups) diff --git a/drivers/sh/intc/handle.c b/drivers/sh/intc/handle.c index 057ce56..7863a44 100644 --- a/drivers/sh/intc/handle.c +++ b/drivers/sh/intc/handle.c @@ -13,7 +13,7 @@ #include <linux/spinlock.h> #include "internals.h" -static unsigned long ack_handle[NR_IRQS]; +static unsigned long ack_handle[INTC_NR_IRQS]; static intc_enum __init intc_grp_id(struct intc_desc *desc, intc_enum enum_id) @@ -172,9 +172,8 @@ intc_get_prio_handle(struct intc_desc *desc, struct intc_desc_int *d, return 0; } -static unsigned int __init intc_ack_data(struct intc_desc *desc, - struct intc_desc_int *d, - intc_enum enum_id) +static unsigned int intc_ack_data(struct intc_desc *desc, + struct intc_desc_int *d, intc_enum enum_id) { struct intc_mask_reg *mr = desc->hw.ack_regs; unsigned int i, j, fn, mode; diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h index b0e9155..f034a97 100644 --- a/drivers/sh/intc/internals.h +++ b/drivers/sh/intc/internals.h @@ -108,6 +108,14 @@ static inline void activate_irq(int irq) #endif } +static inline int intc_handle_int_cmp(const void *a, const void *b) +{ + const struct intc_handle_int *_a = a; + const struct intc_handle_int *_b = b; + + return _a->irq - _b->irq; +} + /* access.c */ extern unsigned long (*intc_reg_fns[])(unsigned long addr, unsigned long h, unsigned long data); @@ -157,7 +165,6 @@ void _intc_enable(struct irq_data *data, unsigned long handle); /* core.c */ extern struct list_head intc_list; extern raw_spinlock_t intc_big_lock; -extern unsigned int nr_intc_controllers; extern struct bus_type intc_subsys; unsigned int intc_get_dfl_prio_level(void); diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c index c7ec49f..93cec21 100644 --- a/drivers/sh/intc/virq.c +++ b/drivers/sh/intc/virq.c @@ -17,7 +17,7 @@ #include <linux/export.h> #include "internals.h" -static struct intc_map_entry intc_irq_xlate[NR_IRQS]; +static struct intc_map_entry intc_irq_xlate[INTC_NR_IRQS]; struct intc_virq_list { unsigned int irq; diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 8418eb0..b9f0192 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/spi/spi.h> +#include <linux/types.h> #include "spi-dw.h" @@ -136,6 +137,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) txconf.dst_maxburst = LNW_DMA_MSIZE_16; txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + txconf.device_fc = false; txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, (unsigned long) &txconf); @@ -144,7 +146,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) dws->tx_sgl.dma_address = dws->tx_dma; dws->tx_sgl.length = dws->len; - txdesc = txchan->device->device_prep_slave_sg(txchan, + txdesc = dmaengine_prep_slave_sg(txchan, &dws->tx_sgl, 1, DMA_MEM_TO_DEV, @@ -158,6 +160,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) rxconf.src_maxburst = LNW_DMA_MSIZE_16; rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + rxconf.device_fc = false; rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, (unsigned long) &rxconf); @@ -166,7 +169,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) dws->rx_sgl.dma_address = dws->rx_dma; dws->rx_sgl.length = dws->len; - rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + rxdesc = dmaengine_prep_slave_sg(rxchan, &dws->rx_sgl, 1, DMA_DEV_TO_MEM, diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index d46e55c..6db2887 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -633,8 +633,8 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) if (!nents) return ERR_PTR(-ENOMEM); - txd = chan->device->device_prep_slave_sg(chan, sgt->sgl, nents, - slave_dirn, DMA_CTRL_ACK); + txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, + slave_dirn, DMA_CTRL_ACK); if (!txd) { dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); return ERR_PTR(-ENOMEM); diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 610f739..9b0d716 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -47,7 +47,6 @@ #include <linux/spi/spi_bitbang.h> #include <linux/module.h> -#include <asm/system.h> #include <asm/irq.h> #include <mach/hardware.h> #include <asm/io.h> diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index 13448c8..e496f79 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -359,11 +359,6 @@ static int orion_spi_setup(struct spi_device *spi) orion_spi = spi_master_get_devdata(spi->master); - /* Fix ac timing if required. */ - if (orion_spi->spi_info->enable_clock_fix) - orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, - (1 << 14)); - if ((spi->max_speed_hz == 0) || (spi->max_speed_hz > orion_spi->max_speed)) spi->max_speed_hz = orion_spi->max_speed; diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index dc8485d..96f0da6 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -880,10 +880,12 @@ static int configure_dma(struct pl022 *pl022) struct dma_slave_config rx_conf = { .src_addr = SSP_DR(pl022->phybase), .direction = DMA_DEV_TO_MEM, + .device_fc = false, }; struct dma_slave_config tx_conf = { .dst_addr = SSP_DR(pl022->phybase), .direction = DMA_MEM_TO_DEV, + .device_fc = false, }; unsigned int pages; int ret; @@ -1017,7 +1019,7 @@ static int configure_dma(struct pl022 *pl022) goto err_tx_sgmap; /* Send both scatterlists */ - rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + rxdesc = dmaengine_prep_slave_sg(rxchan, pl022->sgt_rx.sgl, rx_sglen, DMA_DEV_TO_MEM, @@ -1025,7 +1027,7 @@ static int configure_dma(struct pl022 *pl022) if (!rxdesc) goto err_rxdesc; - txdesc = txchan->device->device_prep_slave_sg(txchan, + txdesc = dmaengine_prep_slave_sg(txchan, pl022->sgt_tx.sgl, tx_sglen, DMA_MEM_TO_DEV, diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 5c6fa5e..ec47d3b 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1099,7 +1099,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) sg_dma_address(sg) = dma->rx_buf_dma + sg->offset; } sg = dma->sg_rx_p; - desc_rx = dma->chan_rx->device->device_prep_slave_sg(dma->chan_rx, sg, + desc_rx = dmaengine_prep_slave_sg(dma->chan_rx, sg, num, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_rx) { @@ -1158,7 +1158,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) sg_dma_address(sg) = dma->tx_buf_dma + sg->offset; } sg = dma->sg_tx_p; - desc_tx = dma->chan_tx->device->device_prep_slave_sg(dma->chan_tx, + desc_tx = dmaengine_prep_slave_sg(dma->chan_tx, sg, num, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_tx) { diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 59e0953..c283212 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -381,8 +381,7 @@ int task_get_unused_fd_flags(struct binder_proc *proc, int flags) repeat: fdt = files_fdtable(files); - fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds, - files->next_fd); + fd = find_next_zero_bit(fdt->open_fds, fdt->max_fds, files->next_fd); /* * N.B. For clone tasks sharing a files structure, this test @@ -410,11 +409,11 @@ repeat: goto repeat; } - FD_SET(fd, fdt->open_fds); + __set_open_fd(fd, fdt); if (flags & O_CLOEXEC) - FD_SET(fd, fdt->close_on_exec); + __set_close_on_exec(fd, fdt); else - FD_CLR(fd, fdt->close_on_exec); + __clear_close_on_exec(fd, fdt); files->next_fd = fd + 1; #if 1 /* Sanity check */ @@ -455,7 +454,7 @@ static void task_fd_install( static void __put_unused_fd(struct files_struct *files, unsigned int fd) { struct fdtable *fdt = files_fdtable(files); - __FD_CLR(fd, fdt->open_fds); + __clear_open_fd(fd, fdt); if (fd < files->next_fd) files->next_fd = fd; } @@ -481,7 +480,7 @@ static long task_close_fd(struct binder_proc *proc, unsigned int fd) if (!filp) goto out_unlock; rcu_assign_pointer(fdt->fd[fd], NULL); - FD_CLR(fd, fdt->close_on_exec); + __clear_close_on_exec(fd, fdt); __put_unused_fd(files, fd); spin_unlock(&files->file_lock); retval = filp_close(filp, files); diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README index 0d82a6d..2d72123 100644 --- a/drivers/staging/asus_oled/README +++ b/drivers/staging/asus_oled/README @@ -52,7 +52,7 @@ Configuration There is only one option: start_off. You can use it by: 'modprobe asus_oled start_off=1', or by adding this - line to /etc/modprobe.conf: + line to /etc/modprobe.d/asus_oled.conf: options asus_oled start_off=1 With this option provided, asus_oled driver will switch off the display diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index db1fd63..bf185e2 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -42,7 +42,6 @@ #include <linux/cdev.h> #include <linux/dma-mapping.h> #include <linux/io.h> -#include <asm/system.h> #include "comedidev.h" #include "internal.h" diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index c9e8c47..915157d 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -86,7 +86,6 @@ TODO: #include "../comedidev.h" #include <linux/delay.h> #include <linux/interrupt.h> -#include <asm/system.h> #include "comedi_pci.h" #include "8253.h" diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c index fd274e9..13e9c80 100644 --- a/drivers/staging/comedi/drivers/mite.c +++ b/drivers/staging/comedi/drivers/mite.c @@ -55,7 +55,6 @@ #include "comedi_pci.h" #include "../comedidev.h" -#include <asm/system.h> #define PCI_MITE_SIZE 4096 #define PCI_DAQ_SIZE 4096 diff --git a/drivers/staging/crystalhd/bc_dts_defs.h b/drivers/staging/crystalhd/bc_dts_defs.h index 8cd51a7..647e116 100644 --- a/drivers/staging/crystalhd/bc_dts_defs.h +++ b/drivers/staging/crystalhd/bc_dts_defs.h @@ -26,6 +26,8 @@ #ifndef _BC_DTS_DEFS_H_ #define _BC_DTS_DEFS_H_ +#include <linux/types.h> + /* BIT Mask */ #define BC_BIT(_x) (1 << (_x)) diff --git a/drivers/staging/crystalhd/crystalhd.h b/drivers/staging/crystalhd/crystalhd.h index 3f4d795..b3a550b 100644 --- a/drivers/staging/crystalhd/crystalhd.h +++ b/drivers/staging/crystalhd/crystalhd.h @@ -1,7 +1,6 @@ #ifndef _CRYSTALHD_H_ #define _CRYSTALHD_H_ -#include <asm/system.h> #include "bc_dts_defs.h" #include "crystalhd_misc.h" #include "bc_dts_glob_lnx.h" diff --git a/drivers/staging/crystalhd/crystalhd_lnx.h b/drivers/staging/crystalhd/crystalhd_lnx.h index a81f929..a9e3633 100644 --- a/drivers/staging/crystalhd/crystalhd_lnx.h +++ b/drivers/staging/crystalhd/crystalhd_lnx.h @@ -45,7 +45,6 @@ #include <linux/io.h> #include <asm/irq.h> #include <asm/pgtable.h> -#include <asm/system.h> #include <linux/uaccess.h> #include "crystalhd.h" diff --git a/drivers/staging/crystalhd/crystalhd_misc.h b/drivers/staging/crystalhd/crystalhd_misc.h index 84c8793..8cdaa7a 100644 --- a/drivers/staging/crystalhd/crystalhd_misc.h +++ b/drivers/staging/crystalhd/crystalhd_misc.h @@ -37,6 +37,7 @@ #include <linux/ioctl.h> #include <linux/dma-mapping.h> #include <linux/sched.h> +#include "bc_dts_glob_lnx.h" /* Global log level variable defined in crystal_misc.c file */ extern uint32_t g_linklog_level; diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 3f919ba..886f565 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -70,7 +70,6 @@ #include <linux/delay.h> #include <linux/bitops.h> #include <linux/io.h> -#include <asm/system.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c index 7569aa0..c4a8a0a 100644 --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c @@ -29,7 +29,6 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/bitops.h> #include <linux/netdevice.h> diff --git a/drivers/staging/media/go7007/go7007-driver.c b/drivers/staging/media/go7007/go7007-driver.c index 6c9279a..ece2dd1 100644 --- a/drivers/staging/media/go7007/go7007-driver.c +++ b/drivers/staging/media/go7007/go7007-driver.c @@ -30,7 +30,6 @@ #include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/slab.h> -#include <asm/system.h> #include <linux/videodev2.h> #include <media/tuner.h> #include <media/v4l2-common.h> diff --git a/drivers/staging/media/go7007/go7007-i2c.c b/drivers/staging/media/go7007/go7007-i2c.c index b8cfa1a..6bc82aa 100644 --- a/drivers/staging/media/go7007/go7007-i2c.c +++ b/drivers/staging/media/go7007/go7007-i2c.c @@ -26,7 +26,6 @@ #include <linux/i2c.h> #include <linux/mutex.h> #include <linux/uaccess.h> -#include <asm/system.h> #include "go7007-priv.h" #include "wis-i2c.h" diff --git a/drivers/staging/media/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c index f916586..3ef4cd8 100644 --- a/drivers/staging/media/go7007/go7007-v4l2.c +++ b/drivers/staging/media/go7007/go7007-v4l2.c @@ -34,7 +34,6 @@ #include <linux/i2c.h> #include <linux/mutex.h> #include <linux/uaccess.h> -#include <asm/system.h> #include "go7007.h" #include "go7007-priv.h" diff --git a/drivers/staging/media/go7007/snd-go7007.c b/drivers/staging/media/go7007/snd-go7007.c index d071c83..5af29ff 100644 --- a/drivers/staging/media/go7007/snd-go7007.c +++ b/drivers/staging/media/go7007/snd-go7007.c @@ -29,7 +29,6 @@ #include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/slab.h> -#include <asm/system.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/initval.h> diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c index 97352cf..3295ea6 100644 --- a/drivers/staging/media/lirc/lirc_serial.c +++ b/drivers/staging/media/lirc/lirc_serial.c @@ -66,7 +66,6 @@ #include <linux/poll.h> #include <linux/platform_device.h> -#include <asm/system.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/fcntl.h> diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c index c94382b..945d962 100644 --- a/drivers/staging/media/lirc/lirc_sir.c +++ b/drivers/staging/media/lirc/lirc_sir.c @@ -49,7 +49,6 @@ #include <linux/mm.h> #include <linux/delay.h> #include <linux/poll.h> -#include <asm/system.h> #include <linux/io.h> #include <asm/irq.h> #include <linux/fcntl.h> diff --git a/drivers/staging/mei/wd.c b/drivers/staging/mei/wd.c index a6910da..cf4c29d 100644 --- a/drivers/staging/mei/wd.c +++ b/drivers/staging/mei/wd.c @@ -323,6 +323,7 @@ static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev, unsigned int t mutex_lock(&dev->device_lock); dev->wd_timeout = timeout; + wd_dev->timeout = timeout; mei_wd_set_start_timeout(dev, dev->wd_timeout); mutex_unlock(&dev->device_lock); diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 4683d5f..6183573 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -58,7 +58,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #define LCD_MINOR 156 #define KEYPAD_MINOR 185 diff --git a/drivers/staging/sbe-2t3e3/io.c b/drivers/staging/sbe-2t3e3/io.c index b458ff0..9a50bcc 100644 --- a/drivers/staging/sbe-2t3e3/io.c +++ b/drivers/staging/sbe-2t3e3/io.c @@ -11,7 +11,6 @@ */ #include <linux/ip.h> -#include <asm/system.h> #include "2t3e3.h" #include "ctrl.h" diff --git a/drivers/staging/ste_rmi4/Makefile b/drivers/staging/ste_rmi4/Makefile index 176f469..e4c0335 100644 --- a/drivers/staging/ste_rmi4/Makefile +++ b/drivers/staging/ste_rmi4/Makefile @@ -2,4 +2,4 @@ # Makefile for the RMI4 touchscreen driver. # obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o -obj-$(CONFIG_MACH_U8500) += board-mop500-u8500uib-rmi4.o +obj-$(CONFIG_MACH_MOP500) += board-mop500-u8500uib-rmi4.o diff --git a/drivers/staging/telephony/phonedev.c b/drivers/staging/telephony/phonedev.c index 1915af2..1dd0b67 100644 --- a/drivers/staging/telephony/phonedev.c +++ b/drivers/staging/telephony/phonedev.c @@ -24,7 +24,6 @@ #include <linux/phonedev.h> #include <linux/init.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <linux/kmod.h> #include <linux/sem.h> diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h index a2f31c6..ed00d3d 100644 --- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h +++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h @@ -17,7 +17,6 @@ #ifndef _HOST_OS_H_ #define _HOST_OS_H_ -#include <asm/system.h> #include <linux/atomic.h> #include <linux/semaphore.h> #include <linux/uaccess.h> diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index a2cbb29..7084f41 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -74,7 +74,6 @@ #include <linux/in.h> #include <linux/delay.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/bitops.h> #include <linux/netdevice.h> diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c index dab603e..d5bf0a7 100644 --- a/drivers/staging/wlags49_h2/wl_main.c +++ b/drivers/staging/wlags49_h2/wl_main.c @@ -86,8 +86,7 @@ // #include <linux/in.h> // #include <linux/delay.h> // #include <asm/io.h> -// #include <asm/system.h> -// #include <asm/bitops.h> +// // #include <asm/bitops.h> #include <linux/unistd.h> #include <asm/uaccess.h> diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c index 9c16f54..90820ff 100644 --- a/drivers/staging/wlags49_h2/wl_netdev.c +++ b/drivers/staging/wlags49_h2/wl_netdev.c @@ -79,8 +79,7 @@ // #include <linux/delay.h> // #include <linux/skbuff.h> // #include <asm/io.h> -// #include <asm/system.h> -// #include <asm/bitops.h> +// // #include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/ethtool.h> diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c index 2bd9b84..3df990c 100644 --- a/drivers/staging/wlags49_h2/wl_pci.c +++ b/drivers/staging/wlags49_h2/wl_pci.c @@ -77,7 +77,6 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/bitops.h> diff --git a/drivers/staging/wlags49_h2/wl_util.c b/drivers/staging/wlags49_h2/wl_util.c index b748a3f..f104e6f 100644 --- a/drivers/staging/wlags49_h2/wl_util.c +++ b/drivers/staging/wlags49_h2/wl_util.c @@ -73,8 +73,7 @@ // #include <linux/in.h> // #include <linux/delay.h> // #include <asm/io.h> -// #include <asm/system.h> -// #include <asm/bitops.h> +// // #include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f7f71b2..514a691 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -18,3 +18,11 @@ config THERMAL_HWMON depends on THERMAL depends on HWMON=y || HWMON=THERMAL default y + +config SPEAR_THERMAL + bool "SPEAr thermal sensor driver" + depends on THERMAL + depends on PLAT_SPEAR + help + Enable this to plug the SPEAr thermal sensor driver into the Linux + thermal framework diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 31108a0..a9fff0b 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o +obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
\ No newline at end of file diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c new file mode 100644 index 0000000..c2e32df --- /dev/null +++ b/drivers/thermal/spear_thermal.c @@ -0,0 +1,206 @@ +/* + * SPEAr thermal driver. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino <vincenzo.frascino@st.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/platform_data/spear_thermal.h> +#include <linux/thermal.h> + +#define MD_FACTOR 1000 + +/* SPEAr Thermal Sensor Dev Structure */ +struct spear_thermal_dev { + /* pointer to base address of the thermal sensor */ + void __iomem *thermal_base; + /* clk structure */ + struct clk *clk; + /* pointer to thermal flags */ + unsigned int flags; +}; + +static inline int thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct spear_thermal_dev *stdev = thermal->devdata; + + /* + * Data are ready to be read after 628 usec from POWERDOWN signal + * (PDN) = 1 + */ + *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR; + return 0; +} + +static struct thermal_zone_device_ops ops = { + .get_temp = thermal_get_temp, +}; + +#ifdef CONFIG_PM +static int spear_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + dev_info(dev, "Suspended.\n"); + + return 0; +} + +static int spear_thermal_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + int ret = 0; + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + return ret; + } + + /* Enable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base); + + dev_info(dev, "Resumed.\n"); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend, + spear_thermal_resume); + +static int spear_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *spear_thermal = NULL; + struct spear_thermal_dev *stdev; + struct spear_thermal_pdata *pdata; + int ret = 0; + struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!stres) { + dev_err(&pdev->dev, "memory resource missing\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "platform data is NULL\n"); + return -EINVAL; + } + + stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); + if (!stdev) { + dev_err(&pdev->dev, "kzalloc fail\n"); + return -ENOMEM; + } + + /* Enable thermal sensor */ + stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start, + resource_size(stres)); + if (!stdev->thermal_base) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + stdev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(stdev->clk)) { + dev_err(&pdev->dev, "Can't get clock\n"); + return PTR_ERR(stdev->clk); + } + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + goto put_clk; + } + + stdev->flags = pdata->thermal_flags; + writel_relaxed(stdev->flags, stdev->thermal_base); + + spear_thermal = thermal_zone_device_register("spear_thermal", 0, + stdev, &ops, 0, 0, 0, 0); + if (IS_ERR(spear_thermal)) { + dev_err(&pdev->dev, "thermal zone device is NULL\n"); + ret = PTR_ERR(spear_thermal); + goto disable_clk; + } + + platform_set_drvdata(pdev, spear_thermal); + + dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n", + stdev->thermal_base); + + return 0; + +disable_clk: + clk_disable(stdev->clk); +put_clk: + clk_put(stdev->clk); + + return ret; +} + +static int spear_thermal_exit(struct platform_device *pdev) +{ + unsigned int actual_mask = 0; + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + + thermal_zone_device_unregister(spear_thermal); + platform_set_drvdata(pdev, NULL); + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl_relaxed(stdev->thermal_base); + writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + clk_put(stdev->clk); + + return 0; +} + +static struct platform_driver spear_thermal_driver = { + .probe = spear_thermal_probe, + .remove = spear_thermal_exit, + .driver = { + .name = "spear_thermal", + .owner = THIS_MODULE, + .pm = &spear_thermal_pm_ops, + }, +}; + +module_platform_driver(spear_thermal_driver); + +MODULE_AUTHOR("Vincenzo Frascino <vincenzo.frascino@st.com>"); +MODULE_DESCRIPTION("SPEAr thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 220ce7e..022bacb 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -23,6 +23,8 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/device.h> #include <linux/err.h> @@ -39,8 +41,6 @@ MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); MODULE_LICENSE("GPL"); -#define PREFIX "Thermal: " - struct thermal_cooling_device_instance { int id; char name[THERMAL_NAME_LENGTH]; @@ -60,13 +60,11 @@ static LIST_HEAD(thermal_tz_list); static LIST_HEAD(thermal_cdev_list); static DEFINE_MUTEX(thermal_list_lock); -static unsigned int thermal_event_seqnum; - static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; - again: +again: if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0)) return -ENOMEM; @@ -152,9 +150,9 @@ mode_store(struct device *dev, struct device_attribute *attr, if (!tz->ops->set_mode) return -EPERM; - if (!strncmp(buf, "enabled", sizeof("enabled"))) + if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); - else if (!strncmp(buf, "disabled", sizeof("disabled"))) + else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); else result = -EINVAL; @@ -283,8 +281,7 @@ passive_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); -static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \ - passive_store); +static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL), @@ -313,22 +310,6 @@ static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL), }; -#define TRIP_POINT_ATTR_ADD(_dev, _index, result) \ -do { \ - result = device_create_file(_dev, \ - &trip_point_attrs[_index * 2]); \ - if (result) \ - break; \ - result = device_create_file(_dev, \ - &trip_point_attrs[_index * 2 + 1]); \ -} while (0) - -#define TRIP_POINT_ATTR_REMOVE(_dev, _index) \ -do { \ - device_remove_file(_dev, &trip_point_attrs[_index * 2]); \ - device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \ -} while (0) - /* sys I/F for cooling device */ #define to_cooling_device(_dev) \ container_of(_dev, struct thermal_cooling_device, device) @@ -835,15 +816,14 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, return 0; device_remove_file(&tz->device, &dev->attr); - remove_symbol_link: +remove_symbol_link: sysfs_remove_link(&tz->device.kobj, dev->name); - release_idr: +release_idr: release_idr(&tz->idr, &tz->lock, dev->id); - free_mem: +free_mem: kfree(dev); return result; } - EXPORT_SYMBOL(thermal_zone_bind_cooling_device); /** @@ -873,14 +853,13 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, return -ENODEV; - unbind: +unbind: device_remove_file(&tz->device, &pos->attr); sysfs_remove_link(&tz->device.kobj, pos->name); release_idr(&tz->idr, &tz->lock, pos->id); kfree(pos); return 0; } - EXPORT_SYMBOL(thermal_zone_unbind_cooling_device); static void thermal_release(struct device *dev) @@ -888,7 +867,8 @@ static void thermal_release(struct device *dev) struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; - if (!strncmp(dev_name(dev), "thermal_zone", sizeof "thermal_zone" - 1)) { + if (!strncmp(dev_name(dev), "thermal_zone", + sizeof("thermal_zone") - 1)) { tz = to_thermal_zone(dev); kfree(tz); } else { @@ -908,8 +888,9 @@ static struct class thermal_class = { * @devdata: device private data. * @ops: standard thermal cooling devices callbacks. */ -struct thermal_cooling_device *thermal_cooling_device_register( - char *type, void *devdata, const struct thermal_cooling_device_ops *ops) +struct thermal_cooling_device * +thermal_cooling_device_register(char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) { struct thermal_cooling_device *cdev; struct thermal_zone_device *pos; @@ -974,12 +955,11 @@ struct thermal_cooling_device *thermal_cooling_device_register( if (!result) return cdev; - unregister: +unregister: release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); device_unregister(&cdev->device); return ERR_PTR(result); } - EXPORT_SYMBOL(thermal_cooling_device_register); /** @@ -1024,7 +1004,6 @@ void thermal_cooling_device_unregister(struct device_unregister(&cdev->device); return; } - EXPORT_SYMBOL(thermal_cooling_device_unregister); /** @@ -1044,8 +1023,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) if (tz->ops->get_temp(tz, &temp)) { /* get_temp failed - retry it later */ - printk(KERN_WARNING PREFIX "failed to read out thermal zone " - "%d\n", tz->id); + pr_warn("failed to read out thermal zone %d\n", tz->id); goto leave; } @@ -1060,9 +1038,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) ret = tz->ops->notify(tz, count, trip_type); if (!ret) { - printk(KERN_EMERG - "Critical temperature reached (%ld C), shutting down.\n", - temp/1000); + pr_emerg("Critical temperature reached (%ld C), shutting down\n", + temp/1000); orderly_poweroff(true); } } @@ -1100,7 +1077,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) tz->last_temperature = temp; - leave: +leave: if (tz->passive) thermal_zone_device_set_polling(tz, tz->passive_delay); else if (tz->polling_delay) @@ -1199,7 +1176,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, } for (count = 0; count < trips; count++) { - TRIP_POINT_ATTR_ADD(&tz->device, count, result); + result = device_create_file(&tz->device, + &trip_point_attrs[count * 2]); + if (result) + break; + result = device_create_file(&tz->device, + &trip_point_attrs[count * 2 + 1]); if (result) goto unregister; tz->ops->get_trip_type(tz, count, &trip_type); @@ -1235,12 +1217,11 @@ struct thermal_zone_device *thermal_zone_device_register(char *type, if (!result) return tz; - unregister: +unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); device_unregister(&tz->device); return ERR_PTR(result); } - EXPORT_SYMBOL(thermal_zone_device_register); /** @@ -1279,9 +1260,12 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) if (tz->ops->get_mode) device_remove_file(&tz->device, &dev_attr_mode); - for (count = 0; count < tz->trips; count++) - TRIP_POINT_ATTR_REMOVE(&tz->device, count); - + for (count = 0; count < tz->trips; count++) { + device_remove_file(&tz->device, + &trip_point_attrs[count * 2]); + device_remove_file(&tz->device, + &trip_point_attrs[count * 2 + 1]); + } thermal_remove_hwmon_sysfs(tz); release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); idr_destroy(&tz->idr); @@ -1289,7 +1273,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) device_unregister(&tz->device); return; } - EXPORT_SYMBOL(thermal_zone_device_unregister); #ifdef CONFIG_NET @@ -1312,10 +1295,11 @@ int thermal_generate_netlink_event(u32 orig, enum events event) void *msg_header; int size; int result; + static unsigned int thermal_event_seqnum; /* allocate memory */ - size = nla_total_size(sizeof(struct thermal_genl_event)) + \ - nla_total_size(0); + size = nla_total_size(sizeof(struct thermal_genl_event)) + + nla_total_size(0); skb = genlmsg_new(size, GFP_ATOMIC); if (!skb) @@ -1331,8 +1315,8 @@ int thermal_generate_netlink_event(u32 orig, enum events event) } /* fill the data */ - attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, \ - sizeof(struct thermal_genl_event)); + attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, + sizeof(struct thermal_genl_event)); if (!attr) { nlmsg_free(skb); @@ -1359,7 +1343,7 @@ int thermal_generate_netlink_event(u32 orig, enum events event) result = genlmsg_multicast(skb, 0, thermal_event_mcgrp.id, GFP_ATOMIC); if (result) - printk(KERN_INFO "failed to send netlink event:%d", result); + pr_info("failed to send netlink event:%d\n", result); return result; } diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index afadcd43..24145c3 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -85,7 +85,6 @@ static char *serial_version = "4.30"; #include <asm/setup.h> -#include <asm/system.h> #include <asm/irq.h> diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index 3a0d53d..ee30779 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -310,11 +310,8 @@ static int __devexit hvc_vio_remove(struct vio_dev *vdev) static struct vio_driver hvc_vio_driver = { .id_table = hvc_driver_table, .probe = hvc_vio_probe, - .remove = __devexit_p(hvc_vio_remove), - .driver = { - .name = hvc_driver_name, - .owner = THIS_MODULE, - } + .remove = hvc_vio_remove, + .name = hvc_driver_name, }; static int __init hvc_vio_init(void) diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index d237591..3436436 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -879,10 +879,7 @@ static struct vio_driver hvcs_vio_driver = { .id_table = hvcs_driver_table, .probe = hvcs_probe, .remove = __devexit_p(hvcs_remove), - .driver = { - .name = hvcs_driver_name, - .owner = THIS_MODULE, - } + .name = hvcs_driver_name, }; /* Only called from hvcs_get_pi please */ diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index 03c1497..e1235ac 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -102,7 +102,7 @@ * You can find the original tools for this direct from Multitech * ftp://ftp.multitech.com/ISI-Cards/ * - * Having installed the cards the module options (/etc/modprobe.conf) + * Having installed the cards the module options (/etc/modprobe.d/) * * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 * @@ -133,7 +133,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <asm/system.h> #include <linux/pci.h> diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 8a8d044..324467d 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -46,7 +46,6 @@ #include <linux/slab.h> #include <linux/ratelimit.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/uaccess.h> diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 17ff377..c6f372d 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -41,7 +41,6 @@ #include <linux/slab.h> #include <linux/ratelimit.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index a09ce3e..1b2db9a 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -102,7 +102,6 @@ #include <linux/if.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/termios.h> #include <asm/uaccess.h> diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d2256d0..94b6eda 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -50,7 +50,6 @@ #include <linux/uaccess.h> #include <linux/module.h> -#include <asm/system.h> /* number of characters left in xmit buffer before select has we have room */ #define WAKEUP_CHARS 256 diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index f96ecae..eeae7fa 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -27,7 +27,6 @@ #include <linux/devpts_fs.h> #include <linux/slab.h> -#include <asm/system.h> #ifdef CONFIG_UNIX98_PTYS static struct tty_driver *ptm_driver; diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c index f899996..a44345a 100644 --- a/drivers/tty/serial/21285.c +++ b/drivers/tty/serial/21285.c @@ -16,6 +16,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> +#include <asm/system_info.h> #include <asm/hardware/dec21285.h> #include <mach/hardware.h> diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 7398390..5ce7825 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -39,7 +39,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/delay.h> #include <asm/uaccess.h> diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 8609060..29b695d 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -43,7 +43,6 @@ #include <linux/delay.h> #include <linux/major.h> #include <asm/io.h> -#include <asm/system.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 20d795d..0c65c9e 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -51,6 +51,7 @@ #include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/delay.h> +#include <linux/types.h> #include <asm/io.h> #include <asm/sizes.h> @@ -271,6 +272,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, + .device_fc = false, }; struct dma_chan *chan; dma_cap_mask_t mask; @@ -304,6 +306,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 1, + .device_fc = false, }; chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); @@ -481,7 +484,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) return -EBUSY; } - desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, + desc = dmaengine_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); @@ -664,7 +667,6 @@ static void pl011_dma_rx_callback(void *data); static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) { struct dma_chan *rxchan = uap->dmarx.chan; - struct dma_device *dma_dev; struct pl011_dmarx_data *dmarx = &uap->dmarx; struct dma_async_tx_descriptor *desc; struct pl011_sgbuf *sgbuf; @@ -675,8 +677,7 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) /* Start the RX DMA job */ sgbuf = uap->dmarx.use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; - dma_dev = rxchan->device; - desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1, + desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); /* diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 23d7916..5b07c0c 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -34,9 +34,9 @@ static char *serial_version = "$Revision: 1.25 $"; #include <asm/irq.h> #include <asm/dma.h> -#include <asm/system.h> #include <arch/svinto.h> +#include <arch/system.h> /* non-arch dependent serial structures are in linux/serial.h */ #include <linux/serial.h> diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c index e3699a8..6491b86 100644 --- a/drivers/tty/serial/dz.c +++ b/drivers/tty/serial/dz.c @@ -52,7 +52,6 @@ #include <linux/atomic.h> #include <asm/bootinfo.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/dec/interrupts.h> #include <asm/dec/kn01.h> diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index d55709a..defc4e3 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -52,7 +52,6 @@ #include <linux/firmware.h> #include <linux/bitops.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index 5e85e1e..fca13dc 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -50,7 +50,6 @@ #include <linux/atomic.h> #include <asm/irq.h> -#include <asm/system.h> #include <mach/hardware.h> #include <mach/dma.h> diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 332f2eb..e825460 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -844,7 +844,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_dma_address(sg) = priv->rx_buf_dma; - desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, + desc = dmaengine_prep_slave_sg(priv->chan_rx, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -1003,7 +1003,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) sg_dma_len(sg) = size; } - desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, + desc = dmaengine_prep_slave_sg(priv->chan_tx, priv->sg_tx_p, nent, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index ef7a21a..2ca5959 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -38,6 +38,7 @@ #include <asm/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/mach/serial_sa1100.h> /* We've been assigned a range on the "Low-density serial ports" major */ diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 61b7fd2..bf461cf 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1229,17 +1229,20 @@ static void sci_dma_tx_complete(void *arg) port->icount.tx += sg_dma_len(&s->sg_tx); async_tx_ack(s->desc_tx); - s->cookie_tx = -EINVAL; s->desc_tx = NULL; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); if (!uart_circ_empty(xmit)) { + s->cookie_tx = 0; schedule_work(&s->work_tx); - } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl & ~SCSCR_TIE); + } else { + s->cookie_tx = -EINVAL; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl & ~SCSCR_TIE); + } } spin_unlock_irqrestore(&port->lock, flags); @@ -1338,7 +1341,7 @@ static void sci_submit_rx(struct sci_port *s) struct scatterlist *sg = &s->sg_rx[i]; struct dma_async_tx_descriptor *desc; - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); if (desc) { @@ -1453,7 +1456,7 @@ static void work_fn_tx(struct work_struct *work) BUG_ON(!sg_dma_len(sg)); - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, sg, s->sg_len_tx, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { @@ -1501,8 +1504,10 @@ static void sci_start_tx(struct uart_port *port) } if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && - s->cookie_tx < 0) + s->cookie_tx < 0) { + s->cookie_tx = 0; schedule_work(&s->work_tx); + } #endif if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index 3ba5d28..505961c 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -23,6 +23,7 @@ #include <asm/spitfire.h> #include <asm/prom.h> #include <asm/irq.h> +#include <asm/setup.h> #if defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 62dacd0..f0d93eb 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -37,6 +37,7 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> +#include <asm/setup.h> #if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index d3ca6da..675303b 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -41,6 +41,7 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> +#include <asm/setup.h> #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index da44158..b3b70b0 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -37,6 +37,7 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> +#include <asm/setup.h> #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index b7455b5..4001eee 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -67,7 +67,6 @@ #include <linux/types.h> #include <linux/atomic.h> -#include <asm/system.h> #include <asm/dec/interrupts.h> #include <asm/dec/ioasic_addrs.h> diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 8e518da..593d40a 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -86,7 +86,6 @@ #include <linux/ioctl.h> #include <linux/synclink.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 34b1a3c..aa1debf 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -73,7 +73,6 @@ #include <linux/hdlc.h> #include <linux/synclink.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index 4fb6c4b..a3dddc1 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -58,7 +58,6 @@ #include <linux/delay.h> #include <linux/ioctl.h> -#include <asm/system.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index dd8a938..d939bd7 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -97,7 +97,6 @@ #include <linux/ratelimit.h> #include <linux/uaccess.h> -#include <asm/system.h> #include <linux/kbd_kern.h> #include <linux/vt_kern.h> diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 9314d93..a1b9a2f 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -23,7 +23,6 @@ #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/system.h> #undef TTY_DEBUG_WAIT_UNTIL_SENT diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 84c4a7d..3bdd4b1 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -99,7 +99,6 @@ #include <linux/notifier.h> #include <linux/device.h> #include <linux/io.h> -#include <asm/system.h> #include <linux/uaccess.h> #include <linux/kdb.h> #include <linux/ctype.h> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 48ac6e7..cbd8f5f 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -44,7 +44,7 @@ config USB_ARCH_HAS_EHCI default y if PPC_MPC512x default y if ARCH_IXP4XX default y if ARCH_W90X900 - default y if ARCH_AT91SAM9G45 + default y if ARCH_AT91 default y if ARCH_MXC default y if ARCH_OMAP3 default y if ARCH_CNS3XXX diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 26c0b75..2633f75 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -137,7 +137,7 @@ choice config USB_AT91 tristate "Atmel AT91 USB Device Port" - depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45 + depends on ARCH_AT91 help Many Atmel AT91 processors (such as the AT91RM2000) have a full speed USB Device Port with support for five configurable diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 2204a4c..7777927 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -54,7 +54,6 @@ #include <linux/prefetch.h> #include <asm/byteorder.h> -#include <asm/system.h> #include <asm/unaligned.h> /* gadget stack */ diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 2db5f68..0c935d7 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -29,12 +29,13 @@ #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <asm/byteorder.h> #include <mach/hardware.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/gpio.h> #include <mach/board.h> @@ -1707,7 +1708,27 @@ static void at91udc_shutdown(struct platform_device *dev) spin_unlock_irqrestore(&udc->lock, flags); } -static int __init at91udc_probe(struct platform_device *pdev) +static void __devinit at91udc_of_init(struct at91_udc *udc, + struct device_node *np) +{ + struct at91_udc_data *board = &udc->board; + u32 val; + enum of_gpio_flags flags; + + if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0) + board->vbus_polled = 1; + + board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0, + &flags); + board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0; + + board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0, + &flags); + + board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0; +} + +static int __devinit at91udc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct at91_udc *udc; @@ -1742,7 +1763,11 @@ static int __init at91udc_probe(struct platform_device *pdev) /* init software state */ udc = &controller; udc->gadget.dev.parent = dev; - udc->board = *(struct at91_udc_data *) dev->platform_data; + if (pdev->dev.of_node) + at91udc_of_init(udc, pdev->dev.of_node); + else + memcpy(&udc->board, dev->platform_data, + sizeof(struct at91_udc_data)); udc->pdev = pdev; udc->enabled = 0; spin_lock_init(&udc->lock); @@ -1971,6 +1996,15 @@ static int at91udc_resume(struct platform_device *pdev) #define at91udc_resume NULL #endif +#if defined(CONFIG_OF) +static const struct of_device_id at91_udc_dt_ids[] = { + { .compatible = "atmel,at91rm9200-udc" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_udc_dt_ids); +#endif + static struct platform_driver at91_udc_driver = { .remove = __exit_p(at91udc_remove), .shutdown = at91udc_shutdown, @@ -1979,6 +2013,7 @@ static struct platform_driver at91_udc_driver = { .driver = { .name = (char *) driver_name, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(at91_udc_dt_ids), }, }; diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index e1cd56c..a6dfd21 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -44,7 +44,6 @@ #include <asm/byteorder.h> #include <linux/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #define DRIVER_DESC "USB Host+Gadget Emulator" diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b30e21f..5f94e79 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -43,7 +43,6 @@ #include <asm/byteorder.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <asm/dma.h> diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index e1dfd32..e151d6b 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -43,7 +43,6 @@ #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index edd52d9..f9cedd5 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -32,7 +32,6 @@ #include <linux/pm.h> #include <linux/io.h> #include <linux/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #include "langwell_udc.h" diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index 19bbe80..a73cf40 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -34,7 +34,6 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/platform_data/mv_usb.h> -#include <asm/system.h> #include <asm/unaligned.h> #include "mv_udc.h" diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index 01ae56f..43ac748 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -42,7 +42,6 @@ #include <linux/usb/gadget.h> #include <asm/byteorder.h> -#include <asm/system.h> #include <asm/unaligned.h> #include "net2272.h" diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index a5ccabc..ac335af 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -59,7 +59,6 @@ #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index b44830d..3b4b6dd 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -40,7 +40,6 @@ #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <asm/mach-types.h> diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index d83134b..4e4dc1f 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -34,7 +34,6 @@ #include <asm/byteorder.h> #include <linux/io.h> #include <linux/irq.h> -#include <asm/system.h> #include <linux/uaccess.h> #include <asm/unaligned.h> diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 1b33634..41ed69c 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -41,7 +41,6 @@ #include <asm/byteorder.h> #include <asm/dma.h> #include <asm/gpio.h> -#include <asm/system.h> #include <asm/mach-types.h> #include <asm/unaligned.h> diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index d3cdffe..73a934a 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -34,7 +34,6 @@ #include <asm/io.h> #include <asm/byteorder.h> -#include <asm/system.h> #include <asm/unaligned.h> diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index ab9c65e..195524c 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -37,7 +37,6 @@ #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <mach/irqs.h> diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index a5a3ef1..19f318a 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -13,6 +13,7 @@ #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> /* interface and function clocks */ static struct clk *iclk, *fclk; @@ -115,6 +116,8 @@ static const struct hc_driver ehci_atmel_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; +static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); + static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -137,6 +140,13 @@ static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) goto fail_create_hcd; } + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &at91_ehci_dma_mask; + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { retval = -ENOMEM; @@ -225,9 +235,21 @@ static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id atmel_ehci_dt_ids[] = { + { .compatible = "atmel,at91sam9g45-ehci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids); +#endif + static struct platform_driver ehci_atmel_driver = { .probe = ehci_atmel_drv_probe, .remove = __devexit_p(ehci_atmel_drv_remove), .shutdown = usb_hcd_platform_shutdown, - .driver.name = "atmel-ehci", + .driver = { + .name = "atmel-ehci", + .of_match_table = of_match_ptr(atmel_ehci_dt_ids), + }, }; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index aede637..057cdda 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -45,7 +45,6 @@ #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #if defined(CONFIG_PPC_PS3) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 9248800..9e65e30 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -70,7 +70,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/byteorder.h> #include "isp116x.h" diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 9e63cdf..2ed112d 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -84,7 +84,6 @@ #include <linux/prefetch.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <asm/unaligned.h> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 8e855eb..db8963f 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -14,6 +14,8 @@ #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> #include <mach/hardware.h> #include <asm/gpio.h> @@ -477,13 +479,109 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) return IRQ_HANDLED; } +#ifdef CONFIG_OF +static const struct of_device_id at91_ohci_dt_ids[] = { + { .compatible = "atmel,at91rm9200-ohci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); + +static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); + +static int __devinit ohci_at91_of_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int i, ret, gpio; + enum of_gpio_flags flags; + struct at91_usbh_data *pdata; + u32 ports; + + if (!np) + return 0; + + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &at91_ohci_dma_mask; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (!of_property_read_u32(np, "num-ports", &ports)) + pdata->ports = ports; + + for (i = 0; i < 2; i++) { + gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags); + pdata->vbus_pin[i] = gpio; + if (!gpio_is_valid(gpio)) + continue; + pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW; + ret = gpio_request(gpio, "ohci_vbus"); + if (ret) { + dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio); + continue; + } + ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1); + if (ret) + dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d", + !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio); + } + + for (i = 0; i < 2; i++) { + gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); + pdata->overcurrent_pin[i] = gpio; + if (!gpio_is_valid(gpio)) + continue; + ret = gpio_request(gpio, "ohci_overcurrent"); + if (ret) { + dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio); + continue; + } + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio); + continue; + } + + ret = request_irq(gpio_to_irq(gpio), + ohci_hcd_at91_overcurrent_irq, + IRQF_SHARED, "ohci_overcurrent", pdev); + if (ret) { + gpio_free(gpio); + dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); + } + } + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static int __devinit ohci_at91_of_init(struct platform_device *pdev) +{ + return 0; +} +#endif + /*-------------------------------------------------------------------------*/ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { - struct at91_usbh_data *pdata = pdev->dev.platform_data; + struct at91_usbh_data *pdata; int i; + i = ohci_at91_of_init(pdev); + + if (i) + return i; + + pdata = pdev->dev.platform_data; + if (pdata) { for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (!gpio_is_valid(pdata->vbus_pin[i])) @@ -596,5 +694,6 @@ static struct platform_driver ohci_hcd_at91_driver = { .driver = { .name = "at91_ohci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(at91_ohci_dt_ids), }, }; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 543e90e..235171f 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -42,7 +42,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <asm/byteorder.h> diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 4bde4f9..e1004fb 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -16,29 +16,115 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <mach/assabet.h> -#include <mach/badge4.h> #include <asm/hardware/sa1111.h> #ifndef CONFIG_SA1111 #error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined." #endif -extern int usb_disabled(void); +#define USB_STATUS 0x0118 +#define USB_RESET 0x011c +#define USB_IRQTEST 0x0120 + +#define USB_RESET_FORCEIFRESET (1 << 0) +#define USB_RESET_FORCEHCRESET (1 << 1) +#define USB_RESET_CLKGENRESET (1 << 2) +#define USB_RESET_SIMSCALEDOWN (1 << 3) +#define USB_RESET_USBINTTEST (1 << 4) +#define USB_RESET_SLEEPSTBYEN (1 << 5) +#define USB_RESET_PWRSENSELOW (1 << 6) +#define USB_RESET_PWRCTRLLOW (1 << 7) + +#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) +#define USB_STATUS_IRQHCIBUFFACC (1 << 8) +#define USB_STATUS_NIRQHCIM (1 << 9) +#define USB_STATUS_NHCIMFCLR (1 << 10) +#define USB_STATUS_USBPWRSENSE (1 << 11) -/*-------------------------------------------------------------------------*/ +#if 0 +static void dump_hci_status(struct usb_hcd *hcd, const char *label) +{ + unsigned long status = sa1111_readl(hcd->regs + USB_STATUS); + + dbg("%s USB_STATUS = { %s%s%s%s%s}", label, + ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), + ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), + ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), + ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), + ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); +} +#endif -static void sa1111_start_hc(struct sa1111_dev *dev) +static int ohci_sa1111_reset(struct usb_hcd *hcd) { - unsigned int usb_rst = 0; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} - printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n", - __FILE__); +static int __devinit ohci_sa1111_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; -#ifdef CONFIG_SA1100_BADGE4 - if (machine_is_badge4()) { - badge4_set_5V(BADGE4_5V_USB, 1); + ret = ohci_run(ohci); + if (ret < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); } + return ret; +} + +static const struct hc_driver ohci_sa1111_hc_driver = { + .description = hcd_name, + .product_desc = "SA-1111 OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_sa1111_reset, + .start = ohci_sa1111_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif + .start_port_reset = ohci_start_port_reset, +}; + +static int sa1111_start_hc(struct sa1111_dev *dev) +{ + unsigned int usb_rst = 0; + int ret; + + dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n"); if (machine_is_xp860() || machine_has_neponset() || @@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev) * host controller in reset. */ sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, - dev->mapbase + SA1111_USB_RESET); + dev->mapbase + USB_RESET); /* * Now, carefully enable the USB clock, and take * the USB host controller out of reset. */ - sa1111_enable_device(dev); - udelay(11); - sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET); + ret = sa1111_enable_device(dev); + if (ret == 0) { + udelay(11); + sa1111_writel(usb_rst, dev->mapbase + USB_RESET); + } + + return ret; } static void sa1111_stop_hc(struct sa1111_dev *dev) { unsigned int usb_rst; - printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n", - __FILE__); + + dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n"); /* * Put the USB host controller into reset. */ - usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET); + usb_rst = sa1111_readl(dev->mapbase + USB_RESET); sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, - dev->mapbase + SA1111_USB_RESET); + dev->mapbase + USB_RESET); /* * Stop the USB clock. */ sa1111_disable_device(dev); - -#ifdef CONFIG_SA1100_BADGE4 - if (machine_is_badge4()) { - /* Disable power to the USB bus */ - badge4_set_5V(BADGE4_5V_USB, 0); - } -#endif -} - - -/*-------------------------------------------------------------------------*/ - -#if 0 -static void dump_hci_status(struct usb_hcd *hcd, const char *label) -{ - unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS); - - dbg ("%s USB_STATUS = { %s%s%s%s%s}", label, - ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), - ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), - ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), - ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), - ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); } -#endif - -/*-------------------------------------------------------------------------*/ - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - /** - * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs - * Context: !in_interrupt() + * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs * * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - * - * Store this function in the HCD's struct pci_driver as probe(). + * then invokes the start() method for the HCD associated with it. */ -int usb_hcd_sa1111_probe (const struct hc_driver *driver, - struct sa1111_dev *dev) +static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) { struct usb_hcd *hcd; - int retval; + int ret; - hcd = usb_create_hcd (driver, &dev->dev, "sa1111"); + if (usb_disabled()) + return -ENODEV; + + hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111"); if (!hcd) return -ENOMEM; + hcd->rsrc_start = dev->res.start; hcd->rsrc_len = resource_size(&dev->res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { dbg("request_mem_region failed"); - retval = -EBUSY; + ret = -EBUSY; goto err1; } + hcd->regs = dev->mapbase; - sa1111_start_hc(dev); - ohci_hcd_init(hcd_to_ohci(hcd)); + ret = sa1111_start_hc(dev); + if (ret) + goto err2; - retval = usb_add_hcd(hcd, dev->irq[1], 0); - if (retval == 0) - return retval; + ret = usb_add_hcd(hcd, dev->irq[1], 0); + if (ret == 0) + return ret; sa1111_stop_hc(dev); + err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); - return retval; + return ret; } - -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - /** - * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs + * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_sa1111_probe(), first invoking - * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. * + * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking + * the HCD's stop() method. */ -void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev) +static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev) { + struct usb_hcd *hcd = sa1111_get_drvdata(dev); + usb_remove_hcd(hcd); sa1111_stop_hc(dev); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); -} - -/*-------------------------------------------------------------------------*/ -static int __devinit -ohci_sa1111_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); - ohci_stop (hcd); - return ret; - } return 0; } -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_sa1111_hc_driver = { - .description = hcd_name, - .product_desc = "SA-1111 OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_sa1111_start, - .stop = ohci_stop, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - -static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev) -{ - int ret; - - if (usb_disabled()) - return -ENODEV; - - ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev); - return ret; -} - -static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev) +static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev) { struct usb_hcd *hcd = sa1111_get_drvdata(dev); - usb_hcd_sa1111_remove(hcd, dev); - return 0; + if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + hcd->driver->shutdown(hcd); + sa1111_stop_hc(dev); + } } static struct sa1111_driver ohci_hcd_sa1111_driver = { .drv = { .name = "sa1111-ohci", + .owner = THIS_MODULE, }, .devid = SA1111_DEVID_USB, - .probe = ohci_hcd_sa1111_drv_probe, - .remove = ohci_hcd_sa1111_drv_remove, + .probe = ohci_hcd_sa1111_probe, + .remove = ohci_hcd_sa1111_remove, + .shutdown = ohci_hcd_sa1111_shutdown, }; - diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 015c7c6..3b38030 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -40,7 +40,6 @@ #include <linux/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <linux/irq.h> diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 2a2cce2..91ce1c0 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -51,7 +51,6 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/byteorder.h> #include <asm/unaligned.h> diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 16dd6a6..dbbd1ba 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -55,7 +55,6 @@ #include <linux/mutex.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/byteorder.h> /* FIXME ohci.h is ONLY for internal use by the OHCI driver. diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index e37dea8..e4db350 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -45,7 +45,6 @@ #include <asm/uaccess.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include "uhci-hcd.h" diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 97cb459..d05c7fb 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -115,12 +115,12 @@ static bool ux500_configure_channel(struct dma_channel *channel, slave_conf.dst_addr = usb_fifo_addr; slave_conf.dst_addr_width = addr_width; slave_conf.dst_maxburst = 16; + slave_conf.device_fc = false; dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, (unsigned long) &slave_conf); - dma_desc = dma_chan->device-> - device_prep_slave_sg(dma_chan, &sg, 1, direction, + dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!dma_desc) return false; diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 3648c82..6ec7f83 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -786,9 +786,8 @@ static void xfer_work(struct work_struct *work) sg_dma_address(&sg) = pkt->dma + pkt->actual; sg_dma_len(&sg) = pkt->trans; - desc = chan->device->device_prep_slave_sg(chan, &sg, 1, dir, - DMA_PREP_INTERRUPT | - DMA_CTRL_ACK); + desc = dmaengine_prep_slave_sg(chan, &sg, 1, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) return; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7c229d3..ff8605b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1724,7 +1724,8 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) /* * Module parameter to control latency timer for NDI FTDI-based USB devices. - * If this value is not set in modprobe.conf.local its value will be set to 1ms. + * If this value is not set in /etc/modprobe.d/ its value will be set + * to 1ms. */ static int ndi_latency_timer = 1; diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index fe2d803..7691c86 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -222,7 +222,7 @@ config USB_LIBUSUAL for usb-storage and ub drivers, and allows to switch binding of these devices without rebuilding modules. - Typical syntax of /etc/modprobe.conf is: + Typical syntax of /etc/modprobe.d/*conf is: options libusual bias="ub" diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c index f23cae0..887df9d 100644 --- a/drivers/video/amifb.c +++ b/drivers/video/amifb.c @@ -53,7 +53,6 @@ #include <linux/platform_device.h> #include <linux/uaccess.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/amigahw.h> #include <asm/amigaints.h> diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index 915943a..f49181c 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -67,6 +67,28 @@ static inline int wled_idc(int port) return ret; } +static int backlight_power_set(struct pm860x_chip *chip, int port, + int on) +{ + int ret = -EINVAL; + + switch (port) { + case PM8606_BACKLIGHT1: + ret = on ? pm8606_osc_enable(chip, WLED1_DUTY) : + pm8606_osc_disable(chip, WLED1_DUTY); + break; + case PM8606_BACKLIGHT2: + ret = on ? pm8606_osc_enable(chip, WLED2_DUTY) : + pm8606_osc_disable(chip, WLED2_DUTY); + break; + case PM8606_BACKLIGHT3: + ret = on ? pm8606_osc_enable(chip, WLED3_DUTY) : + pm8606_osc_disable(chip, WLED3_DUTY); + break; + } + return ret; +} + static int pm860x_backlight_set(struct backlight_device *bl, int brightness) { struct pm860x_backlight_data *data = bl_get_data(bl); @@ -79,6 +101,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) else value = brightness; + if (brightness) + backlight_power_set(chip, data->port, 1); + ret = pm860x_reg_write(data->i2c, wled_a(data->port), value); if (ret < 0) goto out; @@ -115,6 +140,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) if (ret < 0) goto out; + if (brightness == 0) + backlight_power_set(chip, data->port, 0); + dev_dbg(chip->dev, "set brightness %d\n", value); data->current_brightness = value; return 0; @@ -170,7 +198,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev) struct backlight_device *bl; struct resource *res; struct backlight_properties props; - unsigned char value; char name[MFD_NAME_SIZE]; int ret; @@ -217,26 +244,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bl); - /* Enable reference VSYS */ - ret = pm860x_reg_read(data->i2c, PM8606_VSYS); - if (ret < 0) - goto out; - if ((ret & PM8606_VSYS_EN) == 0) { - value = ret | PM8606_VSYS_EN; - ret = pm860x_reg_write(data->i2c, PM8606_VSYS, value); - if (ret < 0) - goto out; - } - /* Enable reference OSC */ - ret = pm860x_reg_read(data->i2c, PM8606_MISC); - if (ret < 0) - goto out; - if ((ret & PM8606_MISC_OSC_EN) == 0) { - value = ret | PM8606_MISC_OSC_EN; - ret = pm860x_reg_write(data->i2c, PM8606_MISC, value); - if (ret < 0) - goto out; - } /* read current backlight */ ret = pm860x_backlight_get_brightness(bl); if (ret < 0) diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c index be98d15..a523b25 100644 --- a/drivers/video/backlight/apple_bl.c +++ b/drivers/video/backlight/apple_bl.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/pci.h> #include <linux/acpi.h> +#include <linux/atomic.h> static struct backlight_device *apple_backlight_device; @@ -221,14 +222,32 @@ static struct acpi_driver apple_bl_driver = { }, }; +static atomic_t apple_bl_registered = ATOMIC_INIT(0); + +int apple_bl_register(void) +{ + if (atomic_xchg(&apple_bl_registered, 1) == 0) + return acpi_bus_register_driver(&apple_bl_driver); + + return 0; +} +EXPORT_SYMBOL_GPL(apple_bl_register); + +void apple_bl_unregister(void) +{ + if (atomic_xchg(&apple_bl_registered, 0) == 1) + acpi_bus_unregister_driver(&apple_bl_driver); +} +EXPORT_SYMBOL_GPL(apple_bl_unregister); + static int __init apple_bl_init(void) { - return acpi_bus_register_driver(&apple_bl_driver); + return apple_bl_register(); } static void __exit apple_bl_exit(void) { - acpi_bus_unregister_driver(&apple_bl_driver); + apple_bl_unregister(); } module_init(apple_bl_init); diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c index a2161f6..2231aec 100644 --- a/drivers/video/backlight/tosa_lcd.c +++ b/drivers/video/backlight/tosa_lcd.c @@ -271,7 +271,7 @@ static int tosa_lcd_resume(struct spi_device *spi) } #else #define tosa_lcd_suspend NULL -#define tosa_lcd_reume NULL +#define tosa_lcd_resume NULL #endif static struct spi_driver tosa_lcd_driver = { diff --git a/drivers/video/bt431.h b/drivers/video/bt431.h index c826f27..04e0cfb 100644 --- a/drivers/video/bt431.h +++ b/drivers/video/bt431.h @@ -8,7 +8,6 @@ * archive for more details. */ #include <linux/types.h> -#include <asm/system.h> /* * Bt431 cursor generator registers, 32-bit aligned. diff --git a/drivers/video/bt455.h b/drivers/video/bt455.h index b7591fe..80f61b0 100644 --- a/drivers/video/bt455.h +++ b/drivers/video/bt455.h @@ -8,7 +8,6 @@ * archive for more details. */ #include <linux/types.h> -#include <asm/system.h> /* * Bt455 byte-wide registers, 32-bit aligned. diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 8745637..2e471c2 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -77,7 +77,6 @@ #include <linux/crc32.h> /* For counting font checksums */ #include <asm/fb.h> #include <asm/irq.h> -#include <asm/system.h> #include "fbcon.h" diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c index a122d92..6d15966 100644 --- a/drivers/video/console/newport_con.c +++ b/drivers/video/console/newport_con.c @@ -22,7 +22,6 @@ #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/gio_device.h> diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index 8503807..c1527f5 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c @@ -51,7 +51,6 @@ #include <linux/i2c-algo-bit.h> #include <asm/pgtable.h> -#include <asm/system.h> #ifdef __arm__ #include <asm/mach-types.h> diff --git a/drivers/video/dnfb.c b/drivers/video/dnfb.c index ec56d25..49e3dda 100644 --- a/drivers/video/dnfb.c +++ b/drivers/video/dnfb.c @@ -7,7 +7,6 @@ #include <linux/platform_device.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/amigahw.h> #include <asm/amigaints.h> diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 727a514..eec0d7b 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -337,7 +337,7 @@ static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) /* This enables the channel */ if (mx3_fbi->cookie < 0) { - mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, + mx3_fbi->txd = dmaengine_prep_slave_sg(dma_chan, &mx3_fbi->sg[0], 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!mx3_fbi->txd) { dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", @@ -1091,7 +1091,7 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var, if (mx3_fbi->txd) async_tx_ack(mx3_fbi->txd); - txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + + txd = dmaengine_prep_slave_sg(dma_chan, sg + mx3_fbi->cur_ipu_buf, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!txd) { dev_err(fbi->device, diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c index fb3f673..afc9521 100644 --- a/drivers/video/neofb.c +++ b/drivers/video/neofb.c @@ -71,7 +71,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/pgtable.h> -#include <asm/system.h> #ifdef CONFIG_MTRR #include <asm/mtrr.h> diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c index fd22716..4e5b960 100644 --- a/drivers/video/omap2/vrfb.c +++ b/drivers/video/omap2/vrfb.c @@ -27,7 +27,6 @@ #include <linux/bitops.h> #include <linux/mutex.h> -#include <mach/io.h> #include <plat/vrfb.h> #include <plat/sdrc.h> diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c index 0c69fa2..9b4a60b 100644 --- a/drivers/video/pmag-ba-fb.c +++ b/drivers/video/pmag-ba-fb.c @@ -33,7 +33,6 @@ #include <linux/types.h> #include <asm/io.h> -#include <asm/system.h> #include <video/pmag-ba-fb.h> diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c index 22fcb9a..4e7a9c4 100644 --- a/drivers/video/pmagb-b-fb.c +++ b/drivers/video/pmagb-b-fb.c @@ -29,7 +29,6 @@ #include <linux/types.h> #include <asm/io.h> -#include <asm/system.h> #include <video/pmagb-b-fb.h> diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c index f5a39f5..a104e8c 100644 --- a/drivers/video/q40fb.c +++ b/drivers/video/q40fb.c @@ -20,7 +20,6 @@ #include <asm/uaccess.h> #include <asm/setup.h> -#include <asm/system.h> #include <asm/q40_master.h> #include <linux/fb.h> #include <linux/module.h> diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 98d55d0..b632584 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -173,282 +173,48 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/cpufreq.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/mutex.h> #include <linux/io.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> -#include <mach/assabet.h> #include <mach/shannon.h> /* - * debugging? - */ -#define DEBUG 0 -/* * Complain if VAR is out of range. */ #define DEBUG_VAR 1 -#undef ASSABET_PAL_VIDEO - #include "sa1100fb.h" -extern void (*sa1100fb_backlight_power)(int on); -extern void (*sa1100fb_lcd_power)(int on); - -static struct sa1100fb_rgb rgb_4 = { +static const struct sa1100fb_rgb rgb_4 = { .red = { .offset = 0, .length = 4, }, .green = { .offset = 0, .length = 4, }, .blue = { .offset = 0, .length = 4, }, .transp = { .offset = 0, .length = 0, }, }; -static struct sa1100fb_rgb rgb_8 = { +static const struct sa1100fb_rgb rgb_8 = { .red = { .offset = 0, .length = 8, }, .green = { .offset = 0, .length = 8, }, .blue = { .offset = 0, .length = 8, }, .transp = { .offset = 0, .length = 0, }, }; -static struct sa1100fb_rgb def_rgb_16 = { +static const struct sa1100fb_rgb def_rgb_16 = { .red = { .offset = 11, .length = 5, }, .green = { .offset = 5, .length = 6, }, .blue = { .offset = 0, .length = 5, }, .transp = { .offset = 0, .length = 0, }, }; -#ifdef CONFIG_SA1100_ASSABET -#ifndef ASSABET_PAL_VIDEO -/* - * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually - * takes an RGB666 signal, but we provide it with an RGB565 signal - * instead (def_rgb_16). - */ -static struct sa1100fb_mach_info lq039q2ds54_info __initdata = { - .pixclock = 171521, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 5, .vsync_len = 1, - .left_margin = 61, .upper_margin = 3, - .right_margin = 9, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; -#else -static struct sa1100fb_mach_info pal_info __initdata = { - .pixclock = 67797, .bpp = 16, - .xres = 640, .yres = 512, - - .hsync_len = 64, .vsync_len = 6, - .left_margin = 125, .upper_margin = 70, - .right_margin = 115, .lower_margin = 36, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), -}; -#endif -#endif - -#ifdef CONFIG_SA1100_H3600 -static struct sa1100fb_mach_info h3600_info __initdata = { - .pixclock = 174757, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 3, .vsync_len = 3, - .left_margin = 12, .upper_margin = 10, - .right_margin = 17, .lower_margin = 1, - - .cmap_static = 1, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; - -static struct sa1100fb_rgb h3600_rgb_16 = { - .red = { .offset = 12, .length = 4, }, - .green = { .offset = 7, .length = 4, }, - .blue = { .offset = 1, .length = 4, }, - .transp = { .offset = 0, .length = 0, }, -}; -#endif - -#ifdef CONFIG_SA1100_H3100 -static struct sa1100fb_mach_info h3100_info __initdata = { - .pixclock = 406977, .bpp = 4, - .xres = 320, .yres = 240, - - .hsync_len = 26, .vsync_len = 41, - .left_margin = 4, .upper_margin = 0, - .right_margin = 4, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .cmap_greyscale = 1, - .cmap_inverse = 1, - - .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; -#endif - -#ifdef CONFIG_SA1100_COLLIE -static struct sa1100fb_mach_info collie_info __initdata = { - .pixclock = 171521, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 5, .vsync_len = 1, - .left_margin = 11, .upper_margin = 2, - .right_margin = 30, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; -#endif - -#ifdef LART_GREY_LCD -static struct sa1100fb_mach_info lart_grey_info __initdata = { - .pixclock = 150000, .bpp = 4, - .xres = 320, .yres = 240, - - .hsync_len = 1, .vsync_len = 1, - .left_margin = 4, .upper_margin = 0, - .right_margin = 2, .lower_margin = 0, - - .cmap_greyscale = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), -}; -#endif -#ifdef LART_COLOR_LCD -static struct sa1100fb_mach_info lart_color_info __initdata = { - .pixclock = 150000, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 2, .vsync_len = 3, - .left_margin = 69, .upper_margin = 14, - .right_margin = 8, .lower_margin = 4, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), -}; -#endif -#ifdef LART_VIDEO_OUT -static struct sa1100fb_mach_info lart_video_info __initdata = { - .pixclock = 39721, .bpp = 16, - .xres = 640, .yres = 480, - - .hsync_len = 95, .vsync_len = 2, - .left_margin = 40, .upper_margin = 32, - .right_margin = 24, .lower_margin = 11, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), -}; -#endif - -#ifdef LART_KIT01_LCD -static struct sa1100fb_mach_info lart_kit01_info __initdata = { - .pixclock = 63291, .bpp = 16, - .xres = 640, .yres = 480, - - .hsync_len = 64, .vsync_len = 3, - .left_margin = 122, .upper_margin = 45, - .right_margin = 10, .lower_margin = 10, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg -}; -#endif - -#ifdef CONFIG_SA1100_SHANNON -static struct sa1100fb_mach_info shannon_info __initdata = { - .pixclock = 152500, .bpp = 8, - .xres = 640, .yres = 480, - - .hsync_len = 4, .vsync_len = 3, - .left_margin = 2, .upper_margin = 0, - .right_margin = 1, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas, - .lccr3 = LCCR3_ACBsDiv(512), -}; -#endif - -static struct sa1100fb_mach_info * __init -sa1100fb_get_machine_info(struct sa1100fb_info *fbi) -{ - struct sa1100fb_mach_info *inf = NULL; - - /* - * R G B T - * default {11,5}, { 5,6}, { 0,5}, { 0,0} - * h3600 {12,4}, { 7,4}, { 1,4}, { 0,0} - * freebird { 8,4}, { 4,4}, { 0,4}, {12,4} - */ -#ifdef CONFIG_SA1100_ASSABET - if (machine_is_assabet()) { -#ifndef ASSABET_PAL_VIDEO - inf = &lq039q2ds54_info; -#else - inf = &pal_info; -#endif - } -#endif -#ifdef CONFIG_SA1100_H3100 - if (machine_is_h3100()) { - inf = &h3100_info; - } -#endif -#ifdef CONFIG_SA1100_H3600 - if (machine_is_h3600()) { - inf = &h3600_info; - fbi->rgb[RGB_16] = &h3600_rgb_16; - } -#endif -#ifdef CONFIG_SA1100_COLLIE - if (machine_is_collie()) { - inf = &collie_info; - } -#endif -#ifdef CONFIG_SA1100_LART - if (machine_is_lart()) { -#ifdef LART_GREY_LCD - inf = &lart_grey_info; -#endif -#ifdef LART_COLOR_LCD - inf = &lart_color_info; -#endif -#ifdef LART_VIDEO_OUT - inf = &lart_video_info; -#endif -#ifdef LART_KIT01_LCD - inf = &lart_kit01_info; -#endif - } -#endif -#ifdef CONFIG_SA1100_SHANNON - if (machine_is_shannon()) { - inf = &shannon_info; - } -#endif - return inf; -} - static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *); static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state); @@ -533,7 +299,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * is what you poke into the framebuffer to produce the * colour you requested. */ - if (fbi->cmap_inverse) { + if (fbi->inf->cmap_inverse) { red = 0xffff - red; green = 0xffff - green; blue = 0xffff - blue; @@ -607,14 +373,14 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) var->xres = MIN_XRES; if (var->yres < MIN_YRES) var->yres = MIN_YRES; - if (var->xres > fbi->max_xres) - var->xres = fbi->max_xres; - if (var->yres > fbi->max_yres) - var->yres = fbi->max_yres; + if (var->xres > fbi->inf->xres) + var->xres = fbi->inf->xres; + if (var->yres > fbi->inf->yres) + var->yres = fbi->inf->yres; var->xres_virtual = max(var->xres_virtual, var->xres); var->yres_virtual = max(var->yres_virtual, var->yres); - DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel); + dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel); switch (var->bits_per_pixel) { case 4: rgbidx = RGB_4; @@ -638,16 +404,16 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) var->blue = fbi->rgb[rgbidx]->blue; var->transp = fbi->rgb[rgbidx]->transp; - DPRINTK("RGBT length = %d:%d:%d:%d\n", + dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n", var->red.length, var->green.length, var->blue.length, var->transp.length); - DPRINTK("RGBT offset = %d:%d:%d:%d\n", + dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n", var->red.offset, var->green.offset, var->blue.offset, var->transp.offset); #ifdef CONFIG_CPU_FREQ - printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n", + dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n", sa1100fb_display_dma_period(var), cpufreq_get(smp_processor_id())); #endif @@ -655,22 +421,10 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) return 0; } -static inline void sa1100fb_set_truecolor(u_int is_true_color) +static void sa1100fb_set_visual(struct sa1100fb_info *fbi, u32 visual) { - if (machine_is_assabet()) { -#if 1 // phase 4 or newer Assabet's - if (is_true_color) - ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); - else - ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); -#else - // older Assabet's - if (is_true_color) - ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); - else - ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); -#endif - } + if (fbi->inf->set_visual) + fbi->inf->set_visual(visual); } /* @@ -683,11 +437,11 @@ static int sa1100fb_set_par(struct fb_info *info) struct fb_var_screeninfo *var = &info->var; unsigned long palette_mem_size; - DPRINTK("set_par\n"); + dev_dbg(fbi->dev, "set_par\n"); if (var->bits_per_pixel == 16) fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR; - else if (!fbi->cmap_static) + else if (!fbi->inf->cmap_static) fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; else { /* @@ -704,7 +458,7 @@ static int sa1100fb_set_par(struct fb_info *info) palette_mem_size = fbi->palette_size * sizeof(u16); - DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); + dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size); fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size); fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size; @@ -712,7 +466,7 @@ static int sa1100fb_set_par(struct fb_info *info) /* * Set (any) board control register to handle new color depth */ - sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR); + sa1100fb_set_visual(fbi, fbi->fb.fix.visual); sa1100fb_activate_var(var, fbi); return 0; @@ -728,7 +482,7 @@ sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con, /* * Make sure the user isn't doing something stupid. */ - if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static)) + if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->inf->cmap_static)) return -EINVAL; return gen_set_cmap(cmap, kspc, con, info); @@ -775,7 +529,7 @@ static int sa1100fb_blank(int blank, struct fb_info *info) struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; int i; - DPRINTK("sa1100fb_blank: blank=%d\n", blank); + dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank); switch (blank) { case FB_BLANK_POWERDOWN: @@ -863,43 +617,43 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ u_int half_screen_size, yres, pcd; u_long flags; - DPRINTK("Configuring SA1100 LCD\n"); + dev_dbg(fbi->dev, "Configuring SA1100 LCD\n"); - DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n", + dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n", var->xres, var->hsync_len, var->left_margin, var->right_margin); - DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n", + dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n", var->yres, var->vsync_len, var->upper_margin, var->lower_margin); #if DEBUG_VAR if (var->xres < 16 || var->xres > 1024) - printk(KERN_ERR "%s: invalid xres %d\n", + dev_err(fbi->dev, "%s: invalid xres %d\n", fbi->fb.fix.id, var->xres); if (var->hsync_len < 1 || var->hsync_len > 64) - printk(KERN_ERR "%s: invalid hsync_len %d\n", + dev_err(fbi->dev, "%s: invalid hsync_len %d\n", fbi->fb.fix.id, var->hsync_len); if (var->left_margin < 1 || var->left_margin > 255) - printk(KERN_ERR "%s: invalid left_margin %d\n", + dev_err(fbi->dev, "%s: invalid left_margin %d\n", fbi->fb.fix.id, var->left_margin); if (var->right_margin < 1 || var->right_margin > 255) - printk(KERN_ERR "%s: invalid right_margin %d\n", + dev_err(fbi->dev, "%s: invalid right_margin %d\n", fbi->fb.fix.id, var->right_margin); if (var->yres < 1 || var->yres > 1024) - printk(KERN_ERR "%s: invalid yres %d\n", + dev_err(fbi->dev, "%s: invalid yres %d\n", fbi->fb.fix.id, var->yres); if (var->vsync_len < 1 || var->vsync_len > 64) - printk(KERN_ERR "%s: invalid vsync_len %d\n", + dev_err(fbi->dev, "%s: invalid vsync_len %d\n", fbi->fb.fix.id, var->vsync_len); if (var->upper_margin < 0 || var->upper_margin > 255) - printk(KERN_ERR "%s: invalid upper_margin %d\n", + dev_err(fbi->dev, "%s: invalid upper_margin %d\n", fbi->fb.fix.id, var->upper_margin); if (var->lower_margin < 0 || var->lower_margin > 255) - printk(KERN_ERR "%s: invalid lower_margin %d\n", + dev_err(fbi->dev, "%s: invalid lower_margin %d\n", fbi->fb.fix.id, var->lower_margin); #endif - new_regs.lccr0 = fbi->lccr0 | + new_regs.lccr0 = fbi->inf->lccr0 | LCCR0_LEN | LCCR0_LDM | LCCR0_BAM | LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0); @@ -914,7 +668,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ * the YRES parameter. */ yres = var->yres; - if (fbi->lccr0 & LCCR0_Dual) + if (fbi->inf->lccr0 & LCCR0_Dual) yres /= 2; new_regs.lccr2 = @@ -924,14 +678,14 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ LCCR2_EndFrmDel(var->lower_margin); pcd = get_pcd(var->pixclock, cpufreq_get(0)); - new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 | + new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 | (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) | (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL); - DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0); - DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1); - DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2); - DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3); + dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0); + dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1); + dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2); + dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3); half_screen_size = var->bits_per_pixel; half_screen_size = half_screen_size * var->xres * var->yres / 16; @@ -951,9 +705,12 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ * Only update the registers if the controller is enabled * and something has changed. */ - if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) || - (LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) || - (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2)) + if (readl_relaxed(fbi->base + LCCR0) != fbi->reg_lccr0 || + readl_relaxed(fbi->base + LCCR1) != fbi->reg_lccr1 || + readl_relaxed(fbi->base + LCCR2) != fbi->reg_lccr2 || + readl_relaxed(fbi->base + LCCR3) != fbi->reg_lccr3 || + readl_relaxed(fbi->base + DBAR1) != fbi->dbar1 || + readl_relaxed(fbi->base + DBAR2) != fbi->dbar2) sa1100fb_schedule_work(fbi, C_REENABLE); return 0; @@ -967,18 +724,18 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ */ static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on) { - DPRINTK("backlight o%s\n", on ? "n" : "ff"); + dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff"); - if (sa1100fb_backlight_power) - sa1100fb_backlight_power(on); + if (fbi->inf->backlight_power) + fbi->inf->backlight_power(on); } static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on) { - DPRINTK("LCD power o%s\n", on ? "n" : "ff"); + dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff"); - if (sa1100fb_lcd_power) - sa1100fb_lcd_power(on); + if (fbi->inf->lcd_power) + fbi->inf->lcd_power(on); } static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi) @@ -1008,14 +765,25 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi) } if (mask) { + unsigned long flags; + + /* + * SA-1100 requires the GPIO direction register set + * appropriately for the alternate function. Hence + * we set it here via bitmask rather than excessive + * fiddling via the GPIO subsystem - and even then + * we'll still have to deal with GAFR. + */ + local_irq_save(flags); GPDR |= mask; GAFR |= mask; + local_irq_restore(flags); } } static void sa1100fb_enable_controller(struct sa1100fb_info *fbi) { - DPRINTK("Enabling LCD controller\n"); + dev_dbg(fbi->dev, "Enabling LCD controller\n"); /* * Make sure the mode bits are present in the first palette entry @@ -1024,43 +792,46 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi) fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var); /* Sequence from 11.7.10 */ - LCCR3 = fbi->reg_lccr3; - LCCR2 = fbi->reg_lccr2; - LCCR1 = fbi->reg_lccr1; - LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN; - DBAR1 = fbi->dbar1; - DBAR2 = fbi->dbar2; - LCCR0 |= LCCR0_LEN; - - if (machine_is_shannon()) { - GPDR |= SHANNON_GPIO_DISP_EN; - GPSR |= SHANNON_GPIO_DISP_EN; - } - - DPRINTK("DBAR1 = 0x%08x\n", DBAR1); - DPRINTK("DBAR2 = 0x%08x\n", DBAR2); - DPRINTK("LCCR0 = 0x%08x\n", LCCR0); - DPRINTK("LCCR1 = 0x%08x\n", LCCR1); - DPRINTK("LCCR2 = 0x%08x\n", LCCR2); - DPRINTK("LCCR3 = 0x%08x\n", LCCR3); + writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3); + writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2); + writel_relaxed(fbi->reg_lccr1, fbi->base + LCCR1); + writel_relaxed(fbi->reg_lccr0 & ~LCCR0_LEN, fbi->base + LCCR0); + writel_relaxed(fbi->dbar1, fbi->base + DBAR1); + writel_relaxed(fbi->dbar2, fbi->base + DBAR2); + writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0); + + if (machine_is_shannon()) + gpio_set_value(SHANNON_GPIO_DISP_EN, 1); + + dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1)); + dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2)); + dev_dbg(fbi->dev, "LCCR0: 0x%08x\n", readl_relaxed(fbi->base + LCCR0)); + dev_dbg(fbi->dev, "LCCR1: 0x%08x\n", readl_relaxed(fbi->base + LCCR1)); + dev_dbg(fbi->dev, "LCCR2: 0x%08x\n", readl_relaxed(fbi->base + LCCR2)); + dev_dbg(fbi->dev, "LCCR3: 0x%08x\n", readl_relaxed(fbi->base + LCCR3)); } static void sa1100fb_disable_controller(struct sa1100fb_info *fbi) { DECLARE_WAITQUEUE(wait, current); + u32 lccr0; - DPRINTK("Disabling LCD controller\n"); + dev_dbg(fbi->dev, "Disabling LCD controller\n"); - if (machine_is_shannon()) { - GPCR |= SHANNON_GPIO_DISP_EN; - } + if (machine_is_shannon()) + gpio_set_value(SHANNON_GPIO_DISP_EN, 0); set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&fbi->ctrlr_wait, &wait); - LCSR = 0xffffffff; /* Clear LCD Status Register */ - LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */ - LCCR0 &= ~LCCR0_LEN; /* Disable LCD Controller */ + /* Clear LCD Status Register */ + writel_relaxed(~0, fbi->base + LCSR); + + lccr0 = readl_relaxed(fbi->base + LCCR0); + lccr0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */ + writel_relaxed(lccr0, fbi->base + LCCR0); + lccr0 &= ~LCCR0_LEN; /* Disable LCD Controller */ + writel_relaxed(lccr0, fbi->base + LCCR0); schedule_timeout(20 * HZ / 1000); remove_wait_queue(&fbi->ctrlr_wait, &wait); @@ -1072,14 +843,15 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi) static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id) { struct sa1100fb_info *fbi = dev_id; - unsigned int lcsr = LCSR; + unsigned int lcsr = readl_relaxed(fbi->base + LCSR); if (lcsr & LCSR_LDD) { - LCCR0 |= LCCR0_LDM; + u32 lccr0 = readl_relaxed(fbi->base + LCCR0) | LCCR0_LDM; + writel_relaxed(lccr0, fbi->base + LCCR0); wake_up(&fbi->ctrlr_wait); } - LCSR = lcsr; + writel_relaxed(lcsr, fbi->base + LCSR); return IRQ_HANDLED; } @@ -1268,7 +1040,7 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val, switch (val) { case CPUFREQ_ADJUST: case CPUFREQ_INCOMPATIBLE: - printk(KERN_DEBUG "min dma period: %d ps, " + dev_dbg(fbi->dev, "min dma period: %d ps, " "new clock %d kHz\n", sa1100fb_min_dma_period(fbi), policy->max); /* todo: fill in min/max values */ @@ -1318,7 +1090,7 @@ static int sa1100fb_resume(struct platform_device *dev) * cache. Once this area is remapped, all virtual memory * access to the video memory should occur at the new region. */ -static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi) +static int __devinit sa1100fb_map_video_memory(struct sa1100fb_info *fbi) { /* * We reserve one page for the palette, plus the size @@ -1344,7 +1116,7 @@ static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi) } /* Fake monspecs to fill in fbinfo structure */ -static struct fb_monspecs monspecs __initdata = { +static struct fb_monspecs monspecs __devinitdata = { .hfmin = 30000, .hfmax = 70000, .vfmin = 50, @@ -1352,10 +1124,11 @@ static struct fb_monspecs monspecs __initdata = { }; -static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) +static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev) { - struct sa1100fb_mach_info *inf; + struct sa1100fb_mach_info *inf = dev->platform_data; struct sa1100fb_info *fbi; + unsigned i; fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16, GFP_KERNEL); @@ -1390,8 +1163,6 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) fbi->rgb[RGB_8] = &rgb_8; fbi->rgb[RGB_16] = &def_rgb_16; - inf = sa1100fb_get_machine_info(fbi); - /* * People just don't seem to get this. We don't support * anything but correct entries now, so panic if someone @@ -1402,13 +1173,10 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) panic("sa1100fb error: invalid LCCR3 fields set or zero " "pixclock."); - fbi->max_xres = inf->xres; fbi->fb.var.xres = inf->xres; fbi->fb.var.xres_virtual = inf->xres; - fbi->max_yres = inf->yres; fbi->fb.var.yres = inf->yres; fbi->fb.var.yres_virtual = inf->yres; - fbi->max_bpp = inf->bpp; fbi->fb.var.bits_per_pixel = inf->bpp; fbi->fb.var.pixclock = inf->pixclock; fbi->fb.var.hsync_len = inf->hsync_len; @@ -1419,14 +1187,16 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) fbi->fb.var.lower_margin = inf->lower_margin; fbi->fb.var.sync = inf->sync; fbi->fb.var.grayscale = inf->cmap_greyscale; - fbi->cmap_inverse = inf->cmap_inverse; - fbi->cmap_static = inf->cmap_static; - fbi->lccr0 = inf->lccr0; - fbi->lccr3 = inf->lccr3; fbi->state = C_STARTUP; fbi->task_state = (u_char)-1; - fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres * - fbi->max_bpp / 8; + fbi->fb.fix.smem_len = inf->xres * inf->yres * + inf->bpp / 8; + fbi->inf = inf; + + /* Copy the RGB bitfield overrides */ + for (i = 0; i < NR_RGB; i++) + if (inf->rgb[i]) + fbi->rgb[i] = inf->rgb[i]; init_waitqueue_head(&fbi->ctrlr_wait); INIT_WORK(&fbi->task, sa1100fb_task); @@ -1438,13 +1208,20 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) static int __devinit sa1100fb_probe(struct platform_device *pdev) { struct sa1100fb_info *fbi; + struct resource *res; int ret, irq; + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "no platform LCD data\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (irq < 0) + if (irq < 0 || !res) return -EINVAL; - if (!request_mem_region(0xb0100000, 0x10000, "LCD")) + if (!request_mem_region(res->start, resource_size(res), "LCD")) return -EBUSY; fbi = sa1100fb_init_fbinfo(&pdev->dev); @@ -1452,6 +1229,10 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) if (!fbi) goto failed; + fbi->base = ioremap(res->start, resource_size(res)); + if (!fbi->base) + goto failed; + /* Initialize video memory */ ret = sa1100fb_map_video_memory(fbi); if (ret) @@ -1459,14 +1240,16 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi); if (ret) { - printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret); + dev_err(&pdev->dev, "request_irq failed: %d\n", ret); goto failed; } -#ifdef ASSABET_PAL_VIDEO - if (machine_is_assabet()) - ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); -#endif + if (machine_is_shannon()) { + ret = gpio_request_one(SHANNON_GPIO_DISP_EN, + GPIOF_OUT_INIT_LOW, "display enable"); + if (ret) + goto err_free_irq; + } /* * This makes sure that our colour bitfield @@ -1478,7 +1261,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) ret = register_framebuffer(&fbi->fb); if (ret < 0) - goto err_free_irq; + goto err_reg_fb; #ifdef CONFIG_CPU_FREQ fbi->freq_transition.notifier_call = sa1100fb_freq_transition; @@ -1490,12 +1273,17 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) /* This driver cannot be unloaded at the moment */ return 0; + err_reg_fb: + if (machine_is_shannon()) + gpio_free(SHANNON_GPIO_DISP_EN); err_free_irq: free_irq(irq, fbi); failed: + if (fbi) + iounmap(fbi->base); platform_set_drvdata(pdev, NULL); kfree(fbi); - release_mem_region(0xb0100000, 0x10000); + release_mem_region(res->start, resource_size(res)); return ret; } @@ -1505,6 +1293,7 @@ static struct platform_driver sa1100fb_driver = { .resume = sa1100fb_resume, .driver = { .name = "sa11x0-fb", + .owner = THIS_MODULE, }, }; diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h index 1c3b459..fc5d429 100644 --- a/drivers/video/sa1100fb.h +++ b/drivers/video/sa1100fb.h @@ -10,44 +10,15 @@ * for more details. */ -/* - * These are the bitfields for each - * display depth that we support. - */ -struct sa1100fb_rgb { - struct fb_bitfield red; - struct fb_bitfield green; - struct fb_bitfield blue; - struct fb_bitfield transp; -}; - -/* - * This structure describes the machine which we are running on. - */ -struct sa1100fb_mach_info { - u_long pixclock; - - u_short xres; - u_short yres; - - u_char bpp; - u_char hsync_len; - u_char left_margin; - u_char right_margin; - - u_char vsync_len; - u_char upper_margin; - u_char lower_margin; - u_char sync; - - u_int cmap_greyscale:1, - cmap_inverse:1, - cmap_static:1, - unused:29; - - u_int lccr0; - u_int lccr3; -}; +#define LCCR0 0x0000 /* LCD Control Reg. 0 */ +#define LCSR 0x0004 /* LCD Status Reg. */ +#define DBAR1 0x0010 /* LCD DMA Base Address Reg. channel 1 */ +#define DCAR1 0x0014 /* LCD DMA Current Address Reg. channel 1 */ +#define DBAR2 0x0018 /* LCD DMA Base Address Reg. channel 2 */ +#define DCAR2 0x001C /* LCD DMA Current Address Reg. channel 2 */ +#define LCCR1 0x0020 /* LCD Control Reg. 1 */ +#define LCCR2 0x0024 /* LCD Control Reg. 2 */ +#define LCCR3 0x0028 /* LCD Control Reg. 3 */ /* Shadows for LCD controller registers */ struct sa1100fb_lcd_reg { @@ -57,19 +28,11 @@ struct sa1100fb_lcd_reg { unsigned long lccr3; }; -#define RGB_4 (0) -#define RGB_8 (1) -#define RGB_16 (2) -#define NR_RGB 3 - struct sa1100fb_info { struct fb_info fb; struct device *dev; - struct sa1100fb_rgb *rgb[NR_RGB]; - - u_int max_bpp; - u_int max_xres; - u_int max_yres; + const struct sa1100fb_rgb *rgb[NR_RGB]; + void __iomem *base; /* * These are the addresses we mapped @@ -88,12 +51,6 @@ struct sa1100fb_info { dma_addr_t dbar1; dma_addr_t dbar2; - u_int lccr0; - u_int lccr3; - u_int cmap_inverse:1, - cmap_static:1, - unused:30; - u_int reg_lccr0; u_int reg_lccr1; u_int reg_lccr2; @@ -109,6 +66,8 @@ struct sa1100fb_info { struct notifier_block freq_transition; struct notifier_block freq_policy; #endif + + const struct sa1100fb_mach_info *inf; }; #define TO_INF(ptr,member) container_of(ptr,struct sa1100fb_info,member) @@ -130,15 +89,6 @@ struct sa1100fb_info { #define SA1100_NAME "SA1100" /* - * Debug macros - */ -#if DEBUG -# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__ , ## args) -#else -# define DPRINTK(fmt, args...) -#endif - -/* * Minimum X and Y resolutions */ #define MIN_XRES 64 diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index beb4950..cee7803 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -56,7 +56,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/pgtable.h> -#include <asm/system.h> #ifdef CONFIG_MTRR #include <asm/mtrr.h> diff --git a/drivers/virtio/config.c b/drivers/virtio/config.c index 983d482..f70bcd2 100644 --- a/drivers/virtio/config.c +++ b/drivers/virtio/config.c @@ -9,5 +9,4 @@ #include <linux/virtio.h> #include <linux/virtio_config.h> #include <linux/bug.h> -#include <asm/system.h> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 958e512..05f0a80 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -398,21 +398,8 @@ static int restore_common(struct virtio_device *vdev) return 0; } -static int virtballoon_thaw(struct virtio_device *vdev) -{ - return restore_common(vdev); -} - static int virtballoon_restore(struct virtio_device *vdev) { - struct virtio_balloon *vb = vdev->priv; - - /* - * If a request wasn't complete at the time of freezing, this - * could have been set. - */ - vb->need_stats_update = 0; - return restore_common(vdev); } #endif @@ -434,7 +421,6 @@ static struct virtio_driver virtio_balloon_driver = { #ifdef CONFIG_PM .freeze = virtballoon_freeze, .restore = virtballoon_restore, - .thaw = virtballoon_thaw, #endif }; diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 635e1ef..2e03d41 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -720,24 +720,6 @@ static void __devexit virtio_pci_remove(struct pci_dev *pci_dev) } #ifdef CONFIG_PM -static int virtio_pci_suspend(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - - pci_save_state(pci_dev); - pci_set_power_state(pci_dev, PCI_D3hot); - return 0; -} - -static int virtio_pci_resume(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - - pci_restore_state(pci_dev); - pci_set_power_state(pci_dev, PCI_D0); - return 0; -} - static int virtio_pci_freeze(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -758,59 +740,24 @@ static int virtio_pci_freeze(struct device *dev) return ret; } -static int restore_common(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); - int ret; - - ret = pci_enable_device(pci_dev); - if (ret) - return ret; - pci_set_master(pci_dev); - vp_finalize_features(&vp_dev->vdev); - - return ret; -} - -static int virtio_pci_thaw(struct device *dev) +static int virtio_pci_restore(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); struct virtio_driver *drv; int ret; - ret = restore_common(dev); - if (ret) - return ret; - drv = container_of(vp_dev->vdev.dev.driver, struct virtio_driver, driver); - if (drv && drv->thaw) - ret = drv->thaw(&vp_dev->vdev); - else if (drv && drv->restore) - ret = drv->restore(&vp_dev->vdev); - - /* Finally, tell the device we're all set */ - if (!ret) - vp_set_status(&vp_dev->vdev, vp_dev->saved_status); - - return ret; -} - -static int virtio_pci_restore(struct device *dev) -{ - struct pci_dev *pci_dev = to_pci_dev(dev); - struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); - struct virtio_driver *drv; - int ret; + ret = pci_enable_device(pci_dev); + if (ret) + return ret; - drv = container_of(vp_dev->vdev.dev.driver, - struct virtio_driver, driver); + pci_set_master(pci_dev); + vp_finalize_features(&vp_dev->vdev); - ret = restore_common(dev); - if (!ret && drv && drv->restore) + if (drv && drv->restore) ret = drv->restore(&vp_dev->vdev); /* Finally, tell the device we're all set */ @@ -821,12 +768,7 @@ static int virtio_pci_restore(struct device *dev) } static const struct dev_pm_ops virtio_pci_pm_ops = { - .suspend = virtio_pci_suspend, - .resume = virtio_pci_resume, - .freeze = virtio_pci_freeze, - .thaw = virtio_pci_thaw, - .restore = virtio_pci_restore, - .poweroff = virtio_pci_suspend, + SET_SYSTEM_SLEEP_PM_OPS(virtio_pci_freeze, virtio_pci_restore) }; #endif diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 0e7366d..3709624 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -55,6 +55,7 @@ comment "Watchdog Device Drivers" config SOFT_WATCHDOG tristate "Software watchdog" + select WATCHDOG_CORE help A software monitoring watchdog. This will fail to reboot your system from some situations that the hardware watchdog will recover @@ -74,6 +75,7 @@ config WM831X_WATCHDOG config WM8350_WATCHDOG tristate "WM8350 watchdog" depends on MFD_WM8350 + select WATCHDOG_CORE help Support for the watchdog in the WM8350 AudioPlus PMIC. When the watchdog triggers the system will be reset. @@ -217,6 +219,7 @@ config MPCORE_WATCHDOG config EP93XX_WATCHDOG tristate "EP93xx Watchdog" depends on ARCH_EP93XX + select WATCHDOG_CORE help Say Y here if to include support for the watchdog timer embedded in the Cirrus Logic EP93xx family of devices. @@ -234,6 +237,7 @@ config OMAP_WATCHDOG config PNX4008_WATCHDOG tristate "PNX4008 and LPC32XX Watchdog" depends on ARCH_PNX4008 || ARCH_LPC32XX + select WATCHDOG_CORE help Say Y here if to include support for the watchdog timer in the PNX4008 or LPC32XX processor. @@ -283,6 +287,7 @@ config COH901327_WATCHDOG bool "ST-Ericsson COH 901 327 watchdog" depends on ARCH_U300 default y if MACH_U300 + select WATCHDOG_CORE help Say Y here to include Watchdog timer support for the watchdog embedded into the ST-Ericsson U300 series platforms. @@ -328,6 +333,7 @@ config TS72XX_WATCHDOG config MAX63XX_WATCHDOG tristate "Max63xx watchdog" depends on ARM && HAS_IOMEM + select WATCHDOG_CORE help Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. @@ -955,6 +961,7 @@ config INDYDOG config JZ4740_WDT tristate "Ingenic jz4740 SoC hardware watchdog" depends on MACH_JZ4740 + select WATCHDOG_CORE help Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs. @@ -996,6 +1003,7 @@ config AR7_WDT config TXX9_WDT tristate "Toshiba TXx9 Watchdog Timer" depends on CPU_TX39XX || CPU_TX49XX + select WATCHDOG_CORE help Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index b6a2b58..4397881 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -52,6 +52,8 @@ * Includes, defines, variables, module parameters, ... */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + /* Includes */ #include <linux/module.h> /* For module specific items */ #include <linux/moduleparam.h> /* For new moduleparam's */ @@ -70,7 +72,6 @@ /* Module information */ #define DRV_NAME "acquirewdt" -#define PFX DRV_NAME ": " #define WATCHDOG_NAME "Acquire WDT" /* There is no way to see what the correct time-out period is */ #define WATCHDOG_HEARTBEAT 0 @@ -92,8 +93,8 @@ static int wdt_start = 0x443; module_param(wdt_start, int, 0); MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -208,8 +209,7 @@ static int acq_close(struct inode *inode, struct file *file) if (expect_close == 42) { acq_stop(); } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); acq_keepalive(); } clear_bit(0, &acq_is_open); @@ -246,27 +246,24 @@ static int __devinit acq_probe(struct platform_device *dev) if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { - printk(KERN_ERR PFX - "I/O address 0x%04x already in use\n", wdt_stop); + pr_err("I/O address 0x%04x already in use\n", wdt_stop); ret = -EIO; goto out; } } if (!request_region(wdt_start, 1, WATCHDOG_NAME)) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_start); + pr_err("I/O address 0x%04x already in use\n", wdt_start); ret = -EIO; goto unreg_stop; } ret = misc_register(&acq_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_regions; } - printk(KERN_INFO PFX "initialized. (nowayout=%d)\n", nowayout); + pr_info("initialized. (nowayout=%d)\n", nowayout); return 0; unreg_regions: @@ -308,8 +305,7 @@ static int __init acq_init(void) { int err; - printk(KERN_INFO - "WDT driver for Acquire single board computer initialising.\n"); + pr_info("WDT driver for Acquire single board computer initialising\n"); err = platform_driver_register(&acquirewdt_driver); if (err) @@ -332,7 +328,7 @@ static void __exit acq_exit(void) { platform_device_unregister(acq_platform_device); platform_driver_unregister(&acquirewdt_driver); - printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); + pr_info("Watchdog Module Unloaded\n"); } module_init(acq_init); diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index 4d40965..64ae9e9 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -28,6 +28,8 @@ * add wdt_start and wdt_stop as parameters. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -40,10 +42,8 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #define DRV_NAME "advantechwdt" -#define PFX DRV_NAME ": " #define WATCHDOG_NAME "Advantech WDT" #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ @@ -77,8 +77,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -207,8 +207,7 @@ static int advwdt_close(struct inode *inode, struct file *file) if (adv_expect_close == 42) { advwdt_disable(); } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); advwdt_ping(); } clear_bit(0, &advwdt_is_open); @@ -245,18 +244,15 @@ static int __devinit advwdt_probe(struct platform_device *dev) if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { - printk(KERN_ERR PFX - "I/O address 0x%04x already in use\n", - wdt_stop); + pr_err("I/O address 0x%04x already in use\n", + wdt_stop); ret = -EIO; goto out; } } if (!request_region(wdt_start, 1, WATCHDOG_NAME)) { - printk(KERN_ERR PFX - "I/O address 0x%04x already in use\n", - wdt_start); + pr_err("I/O address 0x%04x already in use\n", wdt_start); ret = -EIO; goto unreg_stop; } @@ -265,18 +261,16 @@ static int __devinit advwdt_probe(struct platform_device *dev) * if not reset to the default */ if (advwdt_set_heartbeat(timeout)) { advwdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be 1<=x<=63, using %d\n", timeout); + pr_info("timeout value must be 1<=x<=63, using %d\n", timeout); } ret = misc_register(&advwdt_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_regions; } - printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); out: return ret; @@ -318,8 +312,7 @@ static int __init advwdt_init(void) { int err; - printk(KERN_INFO - "WDT driver for Advantech single board computer initialising.\n"); + pr_info("WDT driver for Advantech single board computer initialising\n"); err = platform_driver_register(&advwdt_driver); if (err) @@ -343,7 +336,7 @@ static void __exit advwdt_exit(void) { platform_device_unregister(advwdt_platform_device); platform_driver_unregister(&advwdt_driver); - printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); + pr_info("Watchdog Module Unloaded\n"); } module_init(advwdt_init); diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index f16dcbd..41b8493 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -7,6 +7,8 @@ * 2 of the License, or (at your option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -22,7 +24,6 @@ #include <linux/io.h> #define WATCHDOG_NAME "ALi_M1535" -#define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ /* internal variables */ @@ -39,8 +40,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0 < timeout < 18000, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -268,8 +269,7 @@ static int ali_release(struct inode *inode, struct file *file) if (ali_expect_release == 42) ali_stop(); else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); ali_keepalive(); } clear_bit(0, &ali_is_open); @@ -399,9 +399,8 @@ static int __init watchdog_init(void) if not reset to the default */ if (timeout < 1 || timeout >= 18000) { timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX - "timeout value must be 0 < timeout < 18000, using %d\n", - timeout); + pr_info("timeout value must be 0 < timeout < 18000, using %d\n", + timeout); } /* Calculate the watchdog's timeout */ @@ -409,20 +408,18 @@ static int __init watchdog_init(void) ret = register_reboot_notifier(&ali_notifier); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto out; } ret = misc_register(&ali_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_reboot; } - printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); out: diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c index 46f4b85..5eee550 100644 --- a/drivers/watchdog/alim7101_wdt.c +++ b/drivers/watchdog/alim7101_wdt.c @@ -19,6 +19,8 @@ * -- Mike Waychison <michael.waychison@sun.com> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -34,10 +36,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> - -#define OUR_NAME "alim7101_wdt" -#define PFX OUR_NAME ": " #define WDT_ENABLE 0x9C #define WDT_DISABLE 0x8C @@ -79,8 +77,8 @@ static unsigned long wdt_is_open; static char wdt_expect_close; static struct pci_dev *alim7101_pmu; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -112,8 +110,7 @@ static void wdt_timer_ping(unsigned long data) ALI_7101_GPIO_O, tmp & ~0x20); } } else { - printk(KERN_WARNING PFX - "Heartbeat lost! Will not ping the watchdog\n"); + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); } /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); @@ -162,7 +159,7 @@ static void wdt_startup(void) /* Start the timer */ mod_timer(&timer, jiffies + WDT_INTERVAL); - printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); + pr_info("Watchdog timer is now enabled\n"); } static void wdt_turnoff(void) @@ -170,7 +167,7 @@ static void wdt_turnoff(void) /* Stop the timer */ del_timer_sync(&timer); wdt_change(WDT_DISABLE); - printk(KERN_INFO PFX "Watchdog timer is now disabled...\n"); + pr_info("Watchdog timer is now disabled...\n"); } static void wdt_keepalive(void) @@ -226,8 +223,7 @@ static int fop_close(struct inode *inode, struct file *file) wdt_turnoff(); else { /* wim: shouldn't there be a: del_timer(&timer); */ - printk(KERN_CRIT PFX - "device file closed unexpectedly. Will not stop the WDT!\n"); + pr_crit("device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; @@ -322,8 +318,7 @@ static int wdt_notify_sys(struct notifier_block *this, * watchdog on reboot with no heartbeat */ wdt_change(WDT_ENABLE); - printk(KERN_INFO PFX "Watchdog timer is now enabled " - "with no heartbeat - should reboot in ~1 second.\n"); + pr_info("Watchdog timer is now enabled with no heartbeat - should reboot in ~1 second\n"); } return NOTIFY_DONE; } @@ -352,12 +347,11 @@ static int __init alim7101_wdt_init(void) struct pci_dev *ali1543_south; char tmp; - printk(KERN_INFO PFX "Steve Hill <steve@navaho.co.uk>.\n"); + pr_info("Steve Hill <steve@navaho.co.uk>\n"); alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, NULL); if (!alim7101_pmu) { - printk(KERN_INFO PFX - "ALi M7101 PMU not present - WDT not set\n"); + pr_info("ALi M7101 PMU not present - WDT not set\n"); return -EBUSY; } @@ -367,56 +361,46 @@ static int __init alim7101_wdt_init(void) ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); if (!ali1543_south) { - printk(KERN_INFO PFX - "ALi 1543 South-Bridge not present - WDT not set\n"); + pr_info("ALi 1543 South-Bridge not present - WDT not set\n"); goto err_out; } pci_read_config_byte(ali1543_south, 0x5e, &tmp); pci_dev_put(ali1543_south); if ((tmp & 0x1e) == 0x00) { if (!use_gpio) { - printk(KERN_INFO PFX - "Detected old alim7101 revision 'a1d'. " - "If this is a cobalt board, set the 'use_gpio' " - "module parameter.\n"); + pr_info("Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.\n"); goto err_out; } nowayout = 1; } else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) { - printk(KERN_INFO PFX - "ALi 1543 South-Bridge does not have the correct " - "revision number (???1001?) - WDT not set\n"); + pr_info("ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n"); goto err_out; } if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX - "timeout value must be 1 <= x <= 3600, using %d\n", - timeout); + pr_info("timeout value must be 1 <= x <= 3600, using %d\n", + timeout); } rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", rc); + pr_err("cannot register reboot notifier (err=%d)\n", rc); goto err_out; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } if (nowayout) __module_get(THIS_MODULE); - printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. " - "timeout=%d sec (nowayout=%d)\n", + pr_info("WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); return 0; diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 502773a..639ae9a 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -23,6 +23,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/errno.h> @@ -39,7 +41,6 @@ #include <asm/addrspace.h> #include <asm/mach-ar7/ar7.h> -#define DRVNAME "ar7_wdt" #define LONGNAME "TI AR7 Watchdog Timer" MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>"); @@ -51,8 +52,8 @@ static int margin = 60; module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); #define READ_REG(x) readl((void __iomem *)&(x)) @@ -93,7 +94,7 @@ static void ar7_wdt_kick(u32 value) return; } } - printk(KERN_ERR DRVNAME ": failed to unlock WDT kick reg\n"); + pr_err("failed to unlock WDT kick reg\n"); } static void ar7_wdt_prescale(u32 value) @@ -106,7 +107,7 @@ static void ar7_wdt_prescale(u32 value) return; } } - printk(KERN_ERR DRVNAME ": failed to unlock WDT prescale reg\n"); + pr_err("failed to unlock WDT prescale reg\n"); } static void ar7_wdt_change(u32 value) @@ -119,7 +120,7 @@ static void ar7_wdt_change(u32 value) return; } } - printk(KERN_ERR DRVNAME ": failed to unlock WDT change reg\n"); + pr_err("failed to unlock WDT change reg\n"); } static void ar7_wdt_disable(u32 value) @@ -135,7 +136,7 @@ static void ar7_wdt_disable(u32 value) } } } - printk(KERN_ERR DRVNAME ": failed to unlock WDT disable reg\n"); + pr_err("failed to unlock WDT disable reg\n"); } static void ar7_wdt_update_margin(int new_margin) @@ -151,21 +152,20 @@ static void ar7_wdt_update_margin(int new_margin) change = 0xffff; ar7_wdt_change(change); margin = change * prescale_value / vbus_rate; - printk(KERN_INFO DRVNAME - ": timer margin %d seconds (prescale %d, change %d, freq %d)\n", - margin, prescale_value, change, vbus_rate); + pr_info("timer margin %d seconds (prescale %d, change %d, freq %d)\n", + margin, prescale_value, change, vbus_rate); } static void ar7_wdt_enable_wdt(void) { - printk(KERN_DEBUG DRVNAME ": enabling watchdog timer\n"); + pr_debug("enabling watchdog timer\n"); ar7_wdt_disable(1); ar7_wdt_kick(1); } static void ar7_wdt_disable_wdt(void) { - printk(KERN_DEBUG DRVNAME ": disabling watchdog timer\n"); + pr_debug("disabling watchdog timer\n"); ar7_wdt_disable(0); } @@ -183,9 +183,7 @@ static int ar7_wdt_open(struct inode *inode, struct file *file) static int ar7_wdt_release(struct inode *inode, struct file *file) { if (!expect_close) - printk(KERN_WARNING DRVNAME - ": watchdog device closed unexpectedly," - "will not disable the watchdog timer\n"); + pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); else if (!nowayout) ar7_wdt_disable_wdt(); clear_bit(0, &wdt_is_open); @@ -283,28 +281,28 @@ static int __devinit ar7_wdt_probe(struct platform_device *pdev) ar7_regs_wdt = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); if (!ar7_regs_wdt) { - printk(KERN_ERR DRVNAME ": could not get registers resource\n"); + pr_err("could not get registers resource\n"); rc = -ENODEV; goto out; } if (!request_mem_region(ar7_regs_wdt->start, resource_size(ar7_regs_wdt), LONGNAME)) { - printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n"); + pr_warn("watchdog I/O region busy\n"); rc = -EBUSY; goto out; } ar7_wdt = ioremap(ar7_regs_wdt->start, resource_size(ar7_regs_wdt)); if (!ar7_wdt) { - printk(KERN_ERR DRVNAME ": could not ioremap registers\n"); + pr_err("could not ioremap registers\n"); rc = -ENXIO; goto out_mem_region; } vbus_clk = clk_get(NULL, "vbus"); if (IS_ERR(vbus_clk)) { - printk(KERN_ERR DRVNAME ": could not get vbus clock\n"); + pr_err("could not get vbus clock\n"); rc = PTR_ERR(vbus_clk); goto out_mem_region; } @@ -315,7 +313,7 @@ static int __devinit ar7_wdt_probe(struct platform_device *pdev) rc = misc_register(&ar7_wdt_miscdev); if (rc) { - printk(KERN_ERR DRVNAME ": unable to register misc device\n"); + pr_err("unable to register misc device\n"); goto out_alloc; } goto out; diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 4ca5d40..2896430 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -45,8 +45,8 @@ MODULE_PARM_DESC(timeout, "Timeout value. Limited to be 1 or 2 seconds. (default=" __MODULE_STRING(TIMEOUT_DEFAULT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 7ceefd2..7ef99a1 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -9,6 +9,8 @@ * 2 of the License, or (at your option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/bitops.h> #include <linux/errno.h> #include <linux/fs.h> @@ -28,14 +30,14 @@ #define WDT_MAX_TIME 256 /* seconds */ static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -209,8 +211,8 @@ static int __devinit at91wdt_probe(struct platform_device *pdev) if (res) return res; - printk(KERN_INFO "AT91 Watchdog Timer enabled (%d seconds%s)\n", - wdt_time, nowayout ? ", nowayout" : ""); + pr_info("AT91 Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); return 0; } @@ -268,8 +270,8 @@ static int __init at91_wdt_init(void) if not reset to the default */ if (at91_wdt_settimeout(wdt_time)) { at91_wdt_settimeout(WDT_DEFAULT_TIME); - pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256" - ", using %d\n", wdt_time); + pr_info("wdt_time value must be 1 <= wdt_time <= 256, using %d\n", + wdt_time); } return platform_driver_register(&at91wdt_driver); diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index 0056256..05e1be8 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -15,6 +15,8 @@ * bootloader doesn't write to this register. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/errno.h> #include <linux/fs.h> #include <linux/init.h> @@ -60,8 +62,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -96,7 +98,7 @@ static void at91_ping(unsigned long data) at91_wdt_reset(); mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT); } else - printk(KERN_CRIT DRV_NAME": I will reset your machine !\n"); + pr_crit("I will reset your machine !\n"); } /* @@ -140,7 +142,7 @@ static int at91_wdt_settimeout(unsigned int timeout) /* Check if disabled */ mr = wdt_read(AT91_WDT_MR); if (mr & AT91_WDT_WDDIS) { - printk(KERN_ERR DRV_NAME": sorry, watchdog is disabled\n"); + pr_err("sorry, watchdog is disabled\n"); return -EIO; } @@ -283,7 +285,7 @@ static int __init at91wdt_probe(struct platform_device *pdev) setup_timer(&at91wdt_private.timer, at91_ping, 0); mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT); - printk(KERN_INFO DRV_NAME " enabled (heartbeat=%d sec, nowayout=%d)\n", + pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n", heartbeat, nowayout); return 0; diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c index 9db8083..1f9371f 100644 --- a/drivers/watchdog/ath79_wdt.c +++ b/drivers/watchdog/ath79_wdt.c @@ -17,6 +17,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/bitops.h> #include <linux/errno.h> #include <linux/fs.h> @@ -45,8 +47,8 @@ #define WDOG_CTRL_ACTION_NMI 2 /* NMI */ #define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -114,8 +116,7 @@ static int ath79_wdt_release(struct inode *inode, struct file *file) if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags)) ath79_wdt_disable(); else { - pr_crit(DRIVER_NAME ": device closed unexpectedly, " - "watchdog timer will not stop!\n"); + pr_crit("device closed unexpectedly, watchdog timer will not stop!\n"); ath79_wdt_keepalive(); } diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c index 5c5f4b1..bc0e91e 100644 --- a/drivers/watchdog/bcm47xx_wdt.c +++ b/drivers/watchdog/bcm47xx_wdt.c @@ -10,6 +10,8 @@ * 2 of the License, or (at your option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/bitops.h> #include <linux/errno.h> #include <linux/fs.h> @@ -33,14 +35,14 @@ #define WDT_MAX_TIME 255 /* seconds */ static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -91,7 +93,7 @@ static void bcm47xx_timer_tick(unsigned long unused) bcm47xx_wdt_hw_start(); mod_timer(&wdt_timer, jiffies + HZ); } else { - printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n"); + pr_crit("Watchdog will fire soon!!!\n"); } } @@ -140,8 +142,7 @@ static int bcm47xx_wdt_release(struct inode *inode, struct file *file) if (expect_release == 42) { bcm47xx_wdt_stop(); } else { - printk(KERN_CRIT DRV_NAME - ": Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); bcm47xx_wdt_start(); } @@ -270,8 +271,7 @@ static int __init bcm47xx_wdt_init(void) if (bcm47xx_wdt_settimeout(wdt_time)) { bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME); - printk(KERN_INFO DRV_NAME ": " - "wdt_time value must be 0 < wdt_time < %d, using %d\n", + pr_info("wdt_time value must be 0 < wdt_time < %d, using %d\n", (WDT_MAX_TIME + 1), wdt_time); } @@ -285,8 +285,8 @@ static int __init bcm47xx_wdt_init(void) return ret; } - printk(KERN_INFO "BCM47xx Watchdog Timer enabled (%d seconds%s)\n", - wdt_time, nowayout ? ", nowayout" : ""); + pr_info("BCM47xx Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); return 0; } diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c index 8dc7de6..8379dc3 100644 --- a/drivers/watchdog/bcm63xx_wdt.c +++ b/drivers/watchdog/bcm63xx_wdt.c @@ -10,6 +10,8 @@ * 2 of the License, or (at your option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/bitops.h> #include <linux/errno.h> #include <linux/fs.h> @@ -50,8 +52,8 @@ static struct { static int expect_close; static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -82,7 +84,7 @@ static void bcm63xx_timer_tick(unsigned long unused) bcm63xx_wdt_hw_start(); mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ); } else - printk(KERN_CRIT PFX ": watchdog will restart system\n"); + pr_crit("watchdog will restart system\n"); } static void bcm63xx_wdt_pet(void) @@ -126,8 +128,7 @@ static int bcm63xx_wdt_release(struct inode *inode, struct file *file) if (expect_close == 42) bcm63xx_wdt_pause(); else { - printk(KERN_CRIT PFX - ": Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); bcm63xx_wdt_start(); } clear_bit(0, &bcm63xx_wdt_device.inuse); diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index b9fa9b7..38bc383 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -11,6 +11,8 @@ * Licensed under the GPL-2 or later. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/platform_device.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -28,15 +30,8 @@ #define stamp(fmt, args...) \ pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) #define stampit() stamp("here i am") -#define pr_devinit(fmt, args...) \ - ({ static const __devinitconst char __fmt[] = fmt; \ - printk(__fmt, ## args); }) -#define pr_init(fmt, args...) \ - ({ static const __initconst char __fmt[] = fmt; \ - printk(__fmt, ## args); }) #define WATCHDOG_NAME "bfin-wdt" -#define PFX WATCHDOG_NAME ": " /* The BF561 has two watchdogs (one per core), but since Linux * only runs on core A, we'll just work with that one. @@ -54,7 +49,7 @@ #define WATCHDOG_TIMEOUT 20 static unsigned int timeout = WATCHDOG_TIMEOUT; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static const struct watchdog_info bfin_wdt_info; static unsigned long open_check; static char expect_close; @@ -126,7 +121,7 @@ static int bfin_wdt_set_timeout(unsigned long t) stamp("maxtimeout=%us newtimeout=%lus (cnt=%#x)", max_t, t, cnt); if (t > max_t) { - printk(KERN_WARNING PFX "timeout value is too large\n"); + pr_warn("timeout value is too large\n"); return -EINVAL; } @@ -182,8 +177,7 @@ static int bfin_wdt_release(struct inode *inode, struct file *file) if (expect_close == 42) bfin_wdt_stop(); else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); bfin_wdt_keepalive(); } expect_close = 0; @@ -368,14 +362,13 @@ static int __devinit bfin_wdt_probe(struct platform_device *pdev) ret = misc_register(&bfin_wdt_miscdev); if (ret) { - pr_devinit(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); return ret; } - pr_devinit(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n", - timeout, nowayout); + pr_info("initialized: timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); return 0; } @@ -439,14 +432,14 @@ static int __init bfin_wdt_init(void) */ ret = platform_driver_register(&bfin_wdt_driver); if (ret) { - pr_init(KERN_ERR PFX "unable to register driver\n"); + pr_err("unable to register driver\n"); return ret; } bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0); if (IS_ERR(bfin_wdt_device)) { - pr_init(KERN_ERR PFX "unable to register device\n"); + pr_err("unable to register device\n"); platform_driver_unregister(&bfin_wdt_driver); return PTR_ERR(bfin_wdt_device); } @@ -479,7 +472,7 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 7c0fdfc..ce0ab44 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -12,6 +12,8 @@ * option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/fs.h> #include <linux/smp.h> @@ -21,7 +23,6 @@ #include <linux/uaccess.h> #include <asm/reg_booke.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/div64.h> @@ -225,8 +226,8 @@ static int booke_wdt_open(struct inode *inode, struct file *file) if (booke_wdt_enabled == 0) { booke_wdt_enabled = 1; on_each_cpu(__booke_wdt_enable, NULL, 0); - pr_debug("booke_wdt: watchdog enabled (timeout = %llu sec)\n", - period_to_sec(booke_wdt_period)); + pr_debug("watchdog enabled (timeout = %llu sec)\n", + period_to_sec(booke_wdt_period)); } spin_unlock(&booke_wdt_lock); @@ -243,7 +244,7 @@ static int booke_wdt_release(struct inode *inode, struct file *file) */ on_each_cpu(__booke_wdt_disable, NULL, 0); booke_wdt_enabled = 0; - pr_debug("booke_wdt: watchdog disabled\n"); + pr_debug("watchdog disabled\n"); #endif clear_bit(0, &wdt_is_active); @@ -275,19 +276,19 @@ static int __init booke_wdt_init(void) { int ret = 0; - pr_info("booke_wdt: powerpc book-e watchdog driver loaded\n"); + pr_info("powerpc book-e watchdog driver loaded\n"); ident.firmware_version = cur_cpu_spec->pvr_value; ret = misc_register(&booke_wdt_miscdev); if (ret) { - pr_err("booke_wdt: cannot register device (minor=%u, ret=%i)\n", + pr_err("cannot register device (minor=%u, ret=%i)\n", WATCHDOG_MINOR, ret); return ret; } spin_lock(&booke_wdt_lock); if (booke_wdt_enabled == 1) { - pr_info("booke_wdt: watchdog enabled (timeout = %llu sec)\n", + pr_info("watchdog enabled (timeout = %llu sec)\n", period_to_sec(booke_wdt_period)); on_each_cpu(__booke_wdt_enable, NULL, 0); } diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c index 5b89f7d..6876430 100644 --- a/drivers/watchdog/coh901327_wdt.c +++ b/drivers/watchdog/coh901327_wdt.c @@ -8,17 +8,15 @@ */ #include <linux/module.h> #include <linux/types.h> -#include <linux/fs.h> -#include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/interrupt.h> #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/bitops.h> -#include <linux/uaccess.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/err.h> #define DRV_NAME "WDOG COH 901 327" @@ -69,13 +67,11 @@ #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U /* Default timeout in seconds = 1 minute */ -static int margin = 60; +static unsigned int margin = 60; static resource_size_t phybase; static resource_size_t physize; static int irq; static void __iomem *virtbase; -static unsigned long coh901327_users; -static unsigned long boot_status; static struct device *parent; /* @@ -155,34 +151,35 @@ static void coh901327_disable(void) __func__, val); } -static void coh901327_start(void) +static int coh901327_start(struct watchdog_device *wdt_dev) { - coh901327_enable(margin * 100); + coh901327_enable(wdt_dev->timeout * 100); + return 0; +} + +static int coh901327_stop(struct watchdog_device *wdt_dev) +{ + coh901327_disable(); + return 0; } -static void coh901327_keepalive(void) +static int coh901327_ping(struct watchdog_device *wdd) { clk_enable(clk); /* Feed the watchdog */ writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR); clk_disable(clk); + return 0; } -static int coh901327_settimeout(int time) +static int coh901327_settimeout(struct watchdog_device *wdt_dev, + unsigned int time) { - /* - * Max margin is 327 since the 10ms - * timeout register is max - * 0x7FFF = 327670ms ~= 327s. - */ - if (time <= 0 || time > 327) - return -EINVAL; - - margin = time; + wdt_dev->timeout = time; clk_enable(clk); /* Set new timeout value */ - writew(margin * 100, virtbase + U300_WDOG_TR); + writew(time * 100, virtbase + U300_WDOG_TR); /* Feed the dog */ writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR); @@ -190,6 +187,23 @@ static int coh901327_settimeout(int time) return 0; } +static unsigned int coh901327_gettimeleft(struct watchdog_device *wdt_dev) +{ + u16 val; + + clk_enable(clk); + /* Read repeatedly until the value is stable! */ + val = readw(virtbase + U300_WDOG_CR); + while (val & U300_WDOG_CR_VALID_IND) + val = readw(virtbase + U300_WDOG_CR); + val &= U300_WDOG_CR_COUNT_VALUE_MASK; + clk_disable(clk); + if (val != 0) + val /= 100; + + return val; +} + /* * This interrupt occurs 10 ms before the watchdog WILL bark. */ @@ -218,130 +232,35 @@ static irqreturn_t coh901327_interrupt(int irq, void *data) return IRQ_HANDLED; } -/* - * Allow only one user (daemon) to open the watchdog - */ -static int coh901327_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(1, &coh901327_users)) - return -EBUSY; - coh901327_start(); - return nonseekable_open(inode, file); -} - -static int coh901327_release(struct inode *inode, struct file *file) -{ - clear_bit(1, &coh901327_users); - coh901327_disable(); - return 0; -} - -static ssize_t coh901327_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) -{ - if (len) - coh901327_keepalive(); - return len; -} - -static long coh901327_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - int ret = -ENOTTY; - u16 val; - int time; - int new_options; - union { - struct watchdog_info __user *ident; - int __user *i; - } uarg; - static const struct watchdog_info ident = { - .options = WDIOF_CARDRESET | - WDIOF_SETTIMEOUT | - WDIOF_KEEPALIVEPING, - .identity = "COH 901 327 Watchdog", - .firmware_version = 1, - }; - uarg.i = (int __user *)arg; - - switch (cmd) { - case WDIOC_GETSUPPORT: - ret = copy_to_user(uarg.ident, &ident, - sizeof(ident)) ? -EFAULT : 0; - break; - - case WDIOC_GETSTATUS: - ret = put_user(0, uarg.i); - break; - - case WDIOC_GETBOOTSTATUS: - ret = put_user(boot_status, uarg.i); - break; - - case WDIOC_SETOPTIONS: - ret = get_user(new_options, uarg.i); - if (ret) - break; - if (new_options & WDIOS_DISABLECARD) - coh901327_disable(); - if (new_options & WDIOS_ENABLECARD) - coh901327_start(); - ret = 0; - break; - - case WDIOC_KEEPALIVE: - coh901327_keepalive(); - ret = 0; - break; - - case WDIOC_SETTIMEOUT: - ret = get_user(time, uarg.i); - if (ret) - break; - - ret = coh901327_settimeout(time); - if (ret) - break; - /* Then fall through to return set value */ - - case WDIOC_GETTIMEOUT: - ret = put_user(margin, uarg.i); - break; - - case WDIOC_GETTIMELEFT: - clk_enable(clk); - /* Read repeatedly until the value is stable! */ - val = readw(virtbase + U300_WDOG_CR); - while (val & U300_WDOG_CR_VALID_IND) - val = readw(virtbase + U300_WDOG_CR); - val &= U300_WDOG_CR_COUNT_VALUE_MASK; - clk_disable(clk); - if (val != 0) - val /= 100; - ret = put_user(val, uarg.i); - break; - } - return ret; -} +static const struct watchdog_info coh901327_ident = { + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = DRV_NAME, +}; -static const struct file_operations coh901327_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = coh901327_write, - .unlocked_ioctl = coh901327_ioctl, - .open = coh901327_open, - .release = coh901327_release, +static struct watchdog_ops coh901327_ops = { + .owner = THIS_MODULE, + .start = coh901327_start, + .stop = coh901327_stop, + .ping = coh901327_ping, + .set_timeout = coh901327_settimeout, + .get_timeleft = coh901327_gettimeleft, }; -static struct miscdevice coh901327_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &coh901327_fops, +static struct watchdog_device coh901327_wdt = { + .info = &coh901327_ident, + .ops = &coh901327_ops, + /* + * Max timeout is 327 since the 10ms + * timeout register is max + * 0x7FFF = 327670ms ~= 327s. + */ + .min_timeout = 0, + .max_timeout = 327, }; static int __exit coh901327_remove(struct platform_device *pdev) { - misc_deregister(&coh901327_miscdev); + watchdog_unregister_device(&coh901327_wdt); coh901327_disable(); free_irq(irq, pdev); clk_put(clk); @@ -350,7 +269,6 @@ static int __exit coh901327_remove(struct platform_device *pdev) return 0; } - static int __init coh901327_probe(struct platform_device *pdev) { int ret; @@ -393,7 +311,7 @@ static int __init coh901327_probe(struct platform_device *pdev) case U300_WDOG_SR_STATUS_TIMED_OUT: dev_info(&pdev->dev, "watchdog timed out since last chip reset!\n"); - boot_status = WDIOF_CARDRESET; + coh901327_wdt.bootstatus |= WDIOF_CARDRESET; /* Status will be cleared below */ break; case U300_WDOG_SR_STATUS_NORMAL: @@ -435,7 +353,11 @@ static int __init coh901327_probe(struct platform_device *pdev) clk_disable(clk); - ret = misc_register(&coh901327_miscdev); + if (margin < 1 || margin > 327) + margin = 60; + coh901327_wdt.timeout = margin; + + ret = watchdog_register_device(&coh901327_wdt); if (ret == 0) dev_info(&pdev->dev, "initialized. timer margin=%d sec\n", margin); @@ -543,8 +465,8 @@ module_exit(coh901327_exit); MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); MODULE_DESCRIPTION("COH 901 327 Watchdog"); -module_param(margin, int, 0); +module_param(margin, uint, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:coh901327-watchdog"); diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c index 251c863..7e88839 100644 --- a/drivers/watchdog/cpu5wdt.c +++ b/drivers/watchdog/cpu5wdt.c @@ -19,6 +19,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -71,7 +73,7 @@ static struct { static void cpu5wdt_trigger(unsigned long unused) { if (verbose > 2) - printk(KERN_DEBUG PFX "trigger at %i ticks\n", ticks); + pr_debug("trigger at %i ticks\n", ticks); if (cpu5wdt_device.running) ticks--; @@ -96,7 +98,7 @@ static void cpu5wdt_reset(void) ticks = cpu5wdt_device.default_ticks; if (verbose) - printk(KERN_DEBUG PFX "reset (%i ticks)\n", (int) ticks); + pr_debug("reset (%i ticks)\n", (int) ticks); } @@ -129,7 +131,7 @@ static int cpu5wdt_stop(void) ticks = cpu5wdt_device.default_ticks; spin_unlock_irqrestore(&cpu5wdt_lock, flags); if (verbose) - printk(KERN_CRIT PFX "stop not possible\n"); + pr_crit("stop not possible\n"); return -EIO; } @@ -219,8 +221,7 @@ static int __devinit cpu5wdt_init(void) int err; if (verbose) - printk(KERN_DEBUG PFX - "port=0x%x, verbose=%i\n", port, verbose); + pr_debug("port=0x%x, verbose=%i\n", port, verbose); init_completion(&cpu5wdt_device.stop); cpu5wdt_device.queue = 0; @@ -228,7 +229,7 @@ static int __devinit cpu5wdt_init(void) cpu5wdt_device.default_ticks = ticks; if (!request_region(port, CPU5WDT_EXTENT, PFX)) { - printk(KERN_ERR PFX "request_region failed\n"); + pr_err("request_region failed\n"); err = -EBUSY; goto no_port; } @@ -237,16 +238,16 @@ static int __devinit cpu5wdt_init(void) val = inb(port + CPU5WDT_STATUS_REG); val = (val >> 2) & 1; if (!val) - printk(KERN_INFO PFX "sorry, was my fault\n"); + pr_info("sorry, was my fault\n"); err = misc_register(&cpu5wdt_misc); if (err < 0) { - printk(KERN_ERR PFX "misc_register failed\n"); + pr_err("misc_register failed\n"); goto no_misc; } - printk(KERN_INFO PFX "init success\n"); + pr_info("init success\n"); return 0; no_misc: diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c index 1b793df..95b1b95 100644 --- a/drivers/watchdog/cpwd.c +++ b/drivers/watchdog/cpwd.c @@ -14,6 +14,8 @@ * Copyright (C) 2008 David S. Miller <davem@davemloft.net> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/fs.h> @@ -35,7 +37,6 @@ #include <asm/watchdog.h> #define DRIVER_NAME "cpwd" -#define PFX DRIVER_NAME ": " #define WD_OBPNAME "watchdog" #define WD_BADMODEL "SUNW,501-5336" @@ -385,8 +386,7 @@ static int cpwd_open(struct inode *inode, struct file *f) if (!p->initialized) { if (request_irq(p->irq, &cpwd_interrupt, IRQF_SHARED, DRIVER_NAME, p)) { - printk(KERN_ERR PFX "Cannot register IRQ %d\n", - p->irq); + pr_err("Cannot register IRQ %d\n", p->irq); mutex_unlock(&cpwd_mutex); return -EBUSY; } @@ -542,7 +542,7 @@ static int __devinit cpwd_probe(struct platform_device *op) p = kzalloc(sizeof(*p), GFP_KERNEL); err = -ENOMEM; if (!p) { - printk(KERN_ERR PFX "Unable to allocate struct cpwd.\n"); + pr_err("Unable to allocate struct cpwd\n"); goto out; } @@ -553,14 +553,14 @@ static int __devinit cpwd_probe(struct platform_device *op) p->regs = of_ioremap(&op->resource[0], 0, 4 * WD_TIMER_REGSZ, DRIVER_NAME); if (!p->regs) { - printk(KERN_ERR PFX "Unable to map registers.\n"); + pr_err("Unable to map registers\n"); goto out_free; } options = of_find_node_by_path("/options"); err = -ENODEV; if (!options) { - printk(KERN_ERR PFX "Unable to find /options node.\n"); + pr_err("Unable to find /options node\n"); goto out_iounmap; } @@ -605,8 +605,8 @@ static int __devinit cpwd_probe(struct platform_device *op) err = misc_register(&p->devs[i].misc); if (err) { - printk(KERN_ERR "Could not register misc device for " - "dev %d\n", i); + pr_err("Could not register misc device for dev %d\n", + i); goto out_unregister; } } @@ -617,8 +617,8 @@ static int __devinit cpwd_probe(struct platform_device *op) cpwd_timer.data = (unsigned long) p; cpwd_timer.expires = WD_BTIMEOUT; - printk(KERN_INFO PFX "PLD defect workaround enabled for " - "model " WD_BADMODEL ".\n"); + pr_info("PLD defect workaround enabled for model %s\n", + WD_BADMODEL); } dev_set_drvdata(&op->dev, p); diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c index 63d7b58..06de121 100644 --- a/drivers/watchdog/dw_wdt.c +++ b/drivers/watchdog/dw_wdt.c @@ -16,7 +16,8 @@ * If we receive an expected close for the watchdog then we keep the timer * running, otherwise the timer is stopped and the watchdog will expire. */ -#define pr_fmt(fmt) "dw_wdt: " fmt + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/bitops.h> #include <linux/clk.h> @@ -45,8 +46,8 @@ /* The maximum TOP (timeout period) value that can be set in the watchdog. */ #define DW_WDT_MAX_TOP 15 -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index 09cd888..7705003 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -8,6 +8,9 @@ * Authors: Ray Lehtiniemi <rayl@mail.com>, * Alessandro Zummo <a.zummo@towertech.it> * + * Copyright (c) 2012 H Hartley Sweeten <hsweeten@visionengravers.com> + * Convert to a platform device and use the watchdog framework API + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. @@ -25,187 +28,90 @@ #include <linux/platform_device.h> #include <linux/module.h> -#include <linux/fs.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/timer.h> -#include <linux/uaccess.h> #include <linux/io.h> -#define WDT_VERSION "0.3" -#define PFX "ep93xx_wdt: " +#define WDT_VERSION "0.4" /* default timeout (secs) */ #define WDT_TIMEOUT 30 -static int nowayout = WATCHDOG_NOWAYOUT; -static int timeout = WDT_TIMEOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); + +static unsigned int timeout = WDT_TIMEOUT; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WDT_TIMEOUT) ")"); static void __iomem *mmio_base; static struct timer_list timer; static unsigned long next_heartbeat; -static unsigned long wdt_status; -static unsigned long boot_status; - -#define WDT_IN_USE 0 -#define WDT_OK_TO_CLOSE 1 #define EP93XX_WATCHDOG 0x00 #define EP93XX_WDSTATUS 0x04 -/* reset the wdt every ~200ms */ +/* reset the wdt every ~200ms - the heartbeat of the device is 0.250 seconds*/ #define WDT_INTERVAL (HZ/5) -static void wdt_enable(void) +static void ep93xx_wdt_timer_ping(unsigned long data) { - writel(0xaaaa, mmio_base + EP93XX_WATCHDOG); -} - -static void wdt_disable(void) -{ - writel(0xaa55, mmio_base + EP93XX_WATCHDOG); -} + if (time_before(jiffies, next_heartbeat)) + writel(0x5555, mmio_base + EP93XX_WATCHDOG); -static inline void wdt_ping(void) -{ - writel(0x5555, mmio_base + EP93XX_WATCHDOG); + /* Re-set the timer interval */ + mod_timer(&timer, jiffies + WDT_INTERVAL); } -static void wdt_startup(void) +static int ep93xx_wdt_start(struct watchdog_device *wdd) { next_heartbeat = jiffies + (timeout * HZ); - wdt_enable(); + writel(0xaaaa, mmio_base + EP93XX_WATCHDOG); mod_timer(&timer, jiffies + WDT_INTERVAL); + + return 0; } -static void wdt_shutdown(void) +static int ep93xx_wdt_stop(struct watchdog_device *wdd) { del_timer_sync(&timer); - wdt_disable(); + writel(0xaa55, mmio_base + EP93XX_WATCHDOG); + + return 0; } -static void wdt_keepalive(void) +static int ep93xx_wdt_keepalive(struct watchdog_device *wdd) { /* user land ping */ next_heartbeat = jiffies + (timeout * HZ); -} - -static int ep93xx_wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(WDT_IN_USE, &wdt_status)) - return -EBUSY; - - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - - wdt_startup(); - - return nonseekable_open(inode, file); -} - -static ssize_t -ep93xx_wdt_write(struct file *file, const char __user *data, size_t len, - loff_t *ppos) -{ - if (len) { - if (!nowayout) { - size_t i; - - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - - for (i = 0; i != len; i++) { - char c; - - if (get_user(c, data + i)) - return -EFAULT; - - if (c == 'V') - set_bit(WDT_OK_TO_CLOSE, &wdt_status); - else - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - } - } - wdt_keepalive(); - } - return len; + return 0; } -static const struct watchdog_info ident = { - .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE, - .identity = "EP93xx Watchdog", +static const struct watchdog_info ep93xx_wdt_ident = { + .options = WDIOF_CARDRESET | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = "EP93xx Watchdog", }; -static long ep93xx_wdt_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - int ret = -ENOTTY; - - switch (cmd) { - case WDIOC_GETSUPPORT: - ret = copy_to_user((struct watchdog_info __user *)arg, &ident, - sizeof(ident)) ? -EFAULT : 0; - break; - - case WDIOC_GETSTATUS: - ret = put_user(0, (int __user *)arg); - break; - - case WDIOC_GETBOOTSTATUS: - ret = put_user(boot_status, (int __user *)arg); - break; - - case WDIOC_KEEPALIVE: - wdt_keepalive(); - ret = 0; - break; - - case WDIOC_GETTIMEOUT: - /* actually, it is 0.250 seconds.... */ - ret = put_user(1, (int __user *)arg); - break; - } - return ret; -} - -static int ep93xx_wdt_release(struct inode *inode, struct file *file) -{ - if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) - wdt_shutdown(); - else - printk(KERN_CRIT PFX - "Device closed unexpectedly - timer will not stop\n"); - - clear_bit(WDT_IN_USE, &wdt_status); - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - - return 0; -} - -static const struct file_operations ep93xx_wdt_fops = { +static struct watchdog_ops ep93xx_wdt_ops = { .owner = THIS_MODULE, - .write = ep93xx_wdt_write, - .unlocked_ioctl = ep93xx_wdt_ioctl, - .open = ep93xx_wdt_open, - .release = ep93xx_wdt_release, - .llseek = no_llseek, + .start = ep93xx_wdt_start, + .stop = ep93xx_wdt_stop, + .ping = ep93xx_wdt_keepalive, }; -static struct miscdevice ep93xx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &ep93xx_wdt_fops, +static struct watchdog_device ep93xx_wdt_wdd = { + .info = &ep93xx_wdt_ident, + .ops = &ep93xx_wdt_ops, }; -static void ep93xx_timer_ping(unsigned long data) -{ - if (time_before(jiffies, next_heartbeat)) - wdt_ping(); - - /* Re-set the timer interval */ - mod_timer(&timer, jiffies + WDT_INTERVAL); -} - static int __devinit ep93xx_wdt_probe(struct platform_device *pdev) { struct resource *res; @@ -224,30 +130,35 @@ static int __devinit ep93xx_wdt_probe(struct platform_device *pdev) if (!mmio_base) return -ENXIO; - err = misc_register(&ep93xx_wdt_miscdev); - - val = readl(mmio_base + EP93XX_WATCHDOG); - boot_status = val & 0x01 ? 1 : 0; - - printk(KERN_INFO PFX "EP93XX watchdog, driver version " - WDT_VERSION "%s\n", - (val & 0x08) ? " (nCS1 disable detected)" : ""); - if (timeout < 1 || timeout > 3600) { timeout = WDT_TIMEOUT; - printk(KERN_INFO PFX + dev_warn(&pdev->dev, "timeout value must be 1<=x<=3600, using %d\n", timeout); } - setup_timer(&timer, ep93xx_timer_ping, 1); - return err; + val = readl(mmio_base + EP93XX_WATCHDOG); + ep93xx_wdt_wdd.bootstatus = (val & 0x01) ? WDIOF_CARDRESET : 0; + ep93xx_wdt_wdd.timeout = timeout; + + watchdog_set_nowayout(&ep93xx_wdt_wdd, nowayout); + + setup_timer(&timer, ep93xx_wdt_timer_ping, 1); + + err = watchdog_register_device(&ep93xx_wdt_wdd); + if (err) + return err; + + dev_info(&pdev->dev, + "EP93XX watchdog, driver version " WDT_VERSION "%s\n", + (val & 0x08) ? " (nCS1 disable detected)" : ""); + + return 0; } static int __devexit ep93xx_wdt_remove(struct platform_device *pdev) { - wdt_shutdown(); - misc_deregister(&ep93xx_wdt_miscdev); + watchdog_unregister_device(&ep93xx_wdt_wdd); return 0; } @@ -262,16 +173,9 @@ static struct platform_driver ep93xx_wdt_driver = { module_platform_driver(ep93xx_wdt_driver); -module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); - -module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, - "Watchdog timeout in seconds. (1<=timeout<=3600, default=" - __MODULE_STRING(WDT_TIMEOUT) ")"); - MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>," - "Alessandro Zummo <a.zummo@towertech.it>"); + "Alessandro Zummo <a.zummo@towertech.it>," + "H Hartley Sweeten <hsweeten@visionengravers.com>"); MODULE_DESCRIPTION("EP93xx Watchdog"); MODULE_LICENSE("GPL"); MODULE_VERSION(WDT_VERSION); diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index 3946c51..cd31b8a 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -45,6 +45,8 @@ * of the on-board SUPER I/O device SMSC FDC 37B782. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/interrupt.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -59,7 +61,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> static unsigned long eurwdt_is_open; static int eurwdt_timeout; @@ -76,8 +77,8 @@ static char *ev = "int"; #define WDT_TIMEOUT 60 /* 1 minute */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -144,11 +145,11 @@ static void eurwdt_activate_timer(void) /* Setting interrupt line */ if (irq == 2 || irq > 15 || irq < 0) { - printk(KERN_ERR ": invalid irq number\n"); + pr_err("invalid irq number\n"); irq = 0; /* if invalid we disable interrupt */ } if (irq == 0) - printk(KERN_INFO ": interrupt disabled\n"); + pr_info("interrupt disabled\n"); eurwdt_write_reg(WDT_TIMER_CFG, irq << 4); @@ -163,12 +164,12 @@ static void eurwdt_activate_timer(void) static irqreturn_t eurwdt_interrupt(int irq, void *dev_id) { - printk(KERN_CRIT "timeout WDT timeout\n"); + pr_crit("timeout WDT timeout\n"); #ifdef ONLY_TESTING - printk(KERN_CRIT "Would Reboot.\n"); + pr_crit("Would Reboot\n"); #else - printk(KERN_CRIT "Initiating system reboot.\n"); + pr_crit("Initiating system reboot\n"); emergency_restart(); #endif return IRQ_HANDLED; @@ -335,8 +336,7 @@ static int eurwdt_release(struct inode *inode, struct file *file) if (eur_expect_close == 42) eurwdt_disable_timer(); else { - printk(KERN_CRIT - "eurwdt: Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); eurwdt_ping(); } clear_bit(0, &eurwdt_is_open); @@ -429,35 +429,32 @@ static int __init eurwdt_init(void) ret = request_irq(irq, eurwdt_interrupt, 0, "eurwdt", NULL); if (ret) { - printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq); + pr_err("IRQ %d is not free\n", irq); goto out; } if (!request_region(io, 2, "eurwdt")) { - printk(KERN_ERR "eurwdt: IO %X is not free.\n", io); + pr_err("IO %X is not free\n", io); ret = -EBUSY; goto outirq; } ret = register_reboot_notifier(&eurwdt_notifier); if (ret) { - printk(KERN_ERR - "eurwdt: can't register reboot notifier (err=%d)\n", ret); + pr_err("can't register reboot notifier (err=%d)\n", ret); goto outreg; } ret = misc_register(&eurwdt_miscdev); if (ret) { - printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n", - WATCHDOG_MINOR); + pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR); goto outreboot; } eurwdt_unlock_chip(); ret = 0; - printk(KERN_INFO "Eurotech WDT driver 0.01 at %X (Interrupt %d)" - " - timeout event: %s\n", + pr_info("Eurotech WDT driver 0.01 at %X (Interrupt %d) - timeout event: %s\n", io, irq, (!strcmp("int", ev) ? "int" : "reboot")); out: diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c index e45ca2b..c65b0a5 100644 --- a/drivers/watchdog/f71808e_wdt.c +++ b/drivers/watchdog/f71808e_wdt.c @@ -19,6 +19,8 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * ***************************************************************************/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/err.h> #include <linux/fs.h> #include <linux/init.h> @@ -189,8 +191,7 @@ static inline int superio_enter(int base) { /* Don't step on other drivers' I/O space by accident */ if (!request_muxed_region(base, 2, DRVNAME)) { - printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n", - (int)base); + pr_err("I/O address 0x%04x already in use\n", (int)base); return -EBUSY; } @@ -217,7 +218,7 @@ static int watchdog_set_timeout(int timeout) { if (timeout <= 0 || timeout > max_timeout) { - printk(KERN_ERR DRVNAME ": watchdog timeout out of range\n"); + pr_err("watchdog timeout out of range\n"); return -EINVAL; } @@ -252,7 +253,7 @@ static int watchdog_set_pulse_width(unsigned int pw) } else if (pw <= 5000) { watchdog.pulse_val = 3; } else { - printk(KERN_ERR DRVNAME ": pulse width out of range\n"); + pr_err("pulse width out of range\n"); err = -EINVAL; goto exit_unlock; } @@ -309,8 +310,7 @@ static int f71862fg_pin_configure(unsigned short ioaddr) if (ioaddr) superio_set_bit(ioaddr, SIO_REG_MFUNCT1, 1); } else { - printk(KERN_ERR DRVNAME ": Invalid argument f71862fg_pin=%d\n", - f71862fg_pin); + pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin); return -EINVAL; } return 0; @@ -487,8 +487,7 @@ static int watchdog_release(struct inode *inode, struct file *file) if (!watchdog.expect_close) { watchdog_keepalive(); - printk(KERN_CRIT DRVNAME - ": Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); } else if (!nowayout) { watchdog_stop(); } @@ -672,25 +671,22 @@ static int __init watchdog_init(int sioaddr) err = misc_register(&watchdog_miscdev); if (err) { - printk(KERN_ERR DRVNAME - ": cannot register miscdev on minor=%d\n", - watchdog_miscdev.minor); + pr_err("cannot register miscdev on minor=%d\n", + watchdog_miscdev.minor); goto exit_reboot; } if (start_withtimeout) { if (start_withtimeout <= 0 || start_withtimeout > max_timeout) { - printk(KERN_ERR DRVNAME - ": starting timeout out of range\n"); + pr_err("starting timeout out of range\n"); err = -EINVAL; goto exit_miscdev; } err = watchdog_start(); if (err) { - printk(KERN_ERR DRVNAME - ": cannot start watchdog timer\n"); + pr_err("cannot start watchdog timer\n"); goto exit_miscdev; } @@ -720,8 +716,7 @@ static int __init watchdog_init(int sioaddr) if (nowayout) __module_get(THIS_MODULE); - printk(KERN_INFO DRVNAME - ": watchdog started with initial timeout of %u sec\n", + pr_info("watchdog started with initial timeout of %u sec\n", start_withtimeout); } @@ -746,7 +741,7 @@ static int __init f71808e_find(int sioaddr) devid = superio_inw(sioaddr, SIO_REG_MANID); if (devid != SIO_FINTEK_ID) { - pr_debug(DRVNAME ": Not a Fintek device\n"); + pr_debug("Not a Fintek device\n"); err = -ENODEV; goto exit; } @@ -774,13 +769,13 @@ static int __init f71808e_find(int sioaddr) err = -ENODEV; goto exit; default: - printk(KERN_INFO DRVNAME ": Unrecognized Fintek device: %04x\n", - (unsigned int)devid); + pr_info("Unrecognized Fintek device: %04x\n", + (unsigned int)devid); err = -ENODEV; goto exit; } - printk(KERN_INFO DRVNAME ": Found %s watchdog chip, revision %d\n", + pr_info("Found %s watchdog chip, revision %d\n", f71808e_names[watchdog.type], (int)superio_inb(sioaddr, SIO_REG_DEVREV)); exit: @@ -808,8 +803,7 @@ static int __init f71808e_init(void) static void __exit f71808e_exit(void) { if (watchdog_is_running()) { - printk(KERN_WARNING DRVNAME - ": Watchdog timer still running, stopping it\n"); + pr_warn("Watchdog timer still running, stopping it\n"); watchdog_stop(); } misc_deregister(&watchdog_miscdev); diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c index b146082..17f4cae 100644 --- a/drivers/watchdog/gef_wdt.c +++ b/drivers/watchdog/gef_wdt.c @@ -24,6 +24,8 @@ * capabilities) a kernel-based watchdog. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/compiler.h> #include <linux/init.h> @@ -68,8 +70,8 @@ static unsigned int bus_clk; static char expect_close; static DEFINE_SPINLOCK(gef_wdt_spinlock); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -110,7 +112,7 @@ static void gef_wdt_handler_enable(void) if (gef_wdt_toggle_wdc(GEF_WDC_ENABLED_FALSE, GEF_WDC_ENABLE_SHIFT)) { gef_wdt_service(); - printk(KERN_NOTICE "gef_wdt: watchdog activated\n"); + pr_notice("watchdog activated\n"); } } @@ -118,7 +120,7 @@ static void gef_wdt_handler_disable(void) { if (gef_wdt_toggle_wdc(GEF_WDC_ENABLED_TRUE, GEF_WDC_ENABLE_SHIFT)) - printk(KERN_NOTICE "gef_wdt: watchdog deactivated\n"); + pr_notice("watchdog deactivated\n"); } static void gef_wdt_set_timeout(unsigned int timeout) @@ -234,8 +236,7 @@ static int gef_wdt_release(struct inode *inode, struct file *file) if (expect_close == 42) gef_wdt_handler_disable(); else { - printk(KERN_CRIT - "gef_wdt: unexpected close, not stopping timer!\n"); + pr_crit("unexpected close, not stopping timer!\n"); gef_wdt_service(); } expect_close = 0; @@ -313,7 +314,7 @@ static struct platform_driver gef_wdt_driver = { static int __init gef_wdt_init(void) { - printk(KERN_INFO "GE watchdog driver\n"); + pr_info("GE watchdog driver\n"); return platform_driver_register(&gef_wdt_driver); } diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 9b49b12..dc563b6 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/module.h> #include <linux/moduleparam.h> @@ -39,8 +40,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -100,7 +101,7 @@ static int geodewdt_release(struct inode *inode, struct file *file) geodewdt_disable(); module_put(THIS_MODULE); } else { - printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n"); + pr_crit("Unexpected close - watchdog is not stopping\n"); geodewdt_ping(); set_bit(WDT_FLAGS_ORPHAN, &wdt_flags); @@ -220,7 +221,7 @@ static int __devinit geodewdt_probe(struct platform_device *dev) wdt_timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); if (!wdt_timer) { - printk(KERN_ERR "geodewdt: No timers were available\n"); + pr_err("No timers were available\n"); return -ENODEV; } diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 3c166d3..cbc7cee 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -13,6 +13,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/device.h> #include <linux/fs.h> #include <linux/init.h> @@ -45,7 +47,7 @@ static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */ static unsigned int reload; /* the computed soft_margin */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static char expect_release; static unsigned long hpwdt_is_open; @@ -235,8 +237,7 @@ static int __devinit cru_detect(unsigned long map_entry, asminline_call(&cmn_regs, bios32_entrypoint); if (cmn_regs.u1.ral != 0) { - printk(KERN_WARNING - "hpwdt: Call succeeded but with an error: 0x%x\n", + pr_warn("Call succeeded but with an error: 0x%x\n", cmn_regs.u1.ral); } else { physical_bios_base = cmn_regs.u2.rebx; @@ -256,14 +257,10 @@ static int __devinit cru_detect(unsigned long map_entry, } } - printk(KERN_DEBUG "hpwdt: CRU Base Address: 0x%lx\n", - physical_bios_base); - printk(KERN_DEBUG "hpwdt: CRU Offset Address: 0x%lx\n", - physical_bios_offset); - printk(KERN_DEBUG "hpwdt: CRU Length: 0x%lx\n", - cru_length); - printk(KERN_DEBUG "hpwdt: CRU Mapped Address: %p\n", - &cru_rom_addr); + pr_debug("CRU Base Address: 0x%lx\n", physical_bios_base); + pr_debug("CRU Offset Address: 0x%lx\n", physical_bios_offset); + pr_debug("CRU Length: 0x%lx\n", cru_length); + pr_debug("CRU Mapped Address: %p\n", &cru_rom_addr); } iounmap(bios32_map); return retval; @@ -458,16 +455,13 @@ static void hpwdt_ping(void) static int hpwdt_change_timer(int new_margin) { if (new_margin < 1 || new_margin > HPWDT_MAX_TIMER) { - printk(KERN_WARNING - "hpwdt: New value passed in is invalid: %d seconds.\n", + pr_warn("New value passed in is invalid: %d seconds\n", new_margin); return -EINVAL; } soft_margin = new_margin; - printk(KERN_DEBUG - "hpwdt: New timer passed in is %d seconds.\n", - new_margin); + pr_debug("New timer passed in is %d seconds\n", new_margin); reload = SECS_TO_TICKS(soft_margin); return 0; @@ -535,8 +529,7 @@ static int hpwdt_release(struct inode *inode, struct file *file) if (expect_release == 42) { hpwdt_stop(); } else { - printk(KERN_CRIT - "hpwdt: Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); hpwdt_ping(); } @@ -881,7 +874,7 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(soft_margin, int, 0); MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index db45091..738032a 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -27,6 +27,8 @@ * Includes, defines, variables, module parameters, ... */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> @@ -44,7 +46,6 @@ #define ESB_VERSION "0.05" #define ESB_MODULE_NAME "i6300ESB timer" #define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION -#define PFX ESB_MODULE_NAME ": " /* PCI configuration registers */ #define ESB_CONFIG_REG 0x60 /* Config register */ @@ -94,8 +95,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<heartbeat<2046, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -213,8 +214,7 @@ static int esb_release(struct inode *inode, struct file *file) if (esb_expect_close == 42) esb_timer_stop(); else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); esb_timer_keepalive(); } clear_bit(0, &timer_alive); @@ -347,19 +347,19 @@ MODULE_DEVICE_TABLE(pci, esb_pci_tbl); static unsigned char __devinit esb_getdevice(struct pci_dev *pdev) { if (pci_enable_device(pdev)) { - printk(KERN_ERR PFX "failed to enable device\n"); + pr_err("failed to enable device\n"); goto err_devput; } if (pci_request_region(pdev, 0, ESB_MODULE_NAME)) { - printk(KERN_ERR PFX "failed to request region\n"); + pr_err("failed to request region\n"); goto err_disable; } BASEADDR = pci_ioremap_bar(pdev, 0); if (BASEADDR == NULL) { /* Something's wrong here, BASEADDR has to be set */ - printk(KERN_ERR PFX "failed to get BASEADDR\n"); + pr_err("failed to get BASEADDR\n"); goto err_release; } @@ -397,7 +397,7 @@ static void __devinit esb_initdevice(void) /* Check that the WDT isn't already locked */ pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1); if (val1 & ESB_WDT_LOCK) - printk(KERN_WARNING PFX "nowayout already set\n"); + pr_warn("nowayout already set\n"); /* Set the timer to watchdog mode and disable it for now */ pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00); @@ -423,11 +423,11 @@ static int __devinit esb_probe(struct pci_dev *pdev, cards_found++; if (cards_found == 1) - printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n", + pr_info("Intel 6300ESB WatchDog Timer Driver v%s\n", ESB_VERSION); if (cards_found > 1) { - printk(KERN_ERR PFX "This driver only supports 1 device\n"); + pr_err("This driver only supports 1 device\n"); return -ENODEV; } @@ -439,9 +439,8 @@ static int __devinit esb_probe(struct pci_dev *pdev, if not reset to the default */ if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) { heartbeat = WATCHDOG_HEARTBEAT; - printk(KERN_INFO PFX - "heartbeat value must be 1<heartbeat<2046, using %d\n", - heartbeat); + pr_info("heartbeat value must be 1<heartbeat<2046, using %d\n", + heartbeat); } /* Initialize the watchdog and make sure it does not run */ @@ -450,14 +449,12 @@ static int __devinit esb_probe(struct pci_dev *pdev, /* Register the watchdog so that userspace has access to it */ ret = misc_register(&esb_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto err_unmap; } - printk(KERN_INFO PFX - "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n", - BASEADDR, heartbeat, nowayout); + pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n", + BASEADDR, heartbeat, nowayout); return 0; err_unmap: @@ -503,7 +500,7 @@ static int __init watchdog_init(void) static void __exit watchdog_cleanup(void) { pci_unregister_driver(&esb_driver); - printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); + pr_info("Watchdog Module Unloaded\n"); } module_init(watchdog_init); diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index 481d1ad..2721d29 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -17,10 +17,11 @@ * Includes, defines, variables, module parameters, ... */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + /* Module and version information */ #define DRV_NAME "iTCO_vendor_support" #define DRV_VERSION "1.04" -#define PFX DRV_NAME ": " /* Includes */ #include <linux/module.h> /* For module specific items */ @@ -355,13 +356,13 @@ EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on); static int __init iTCO_vendor_init_module(void) { - printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport); + pr_info("vendor-support=%d\n", vendorsupport); return 0; } static void __exit iTCO_vendor_exit_module(void) { - printk(KERN_INFO PFX "Module Unloaded\n"); + pr_info("Module Unloaded\n"); } module_init(iTCO_vendor_init_module); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index bdf401b..9fecb95 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -43,10 +43,11 @@ * Includes, defines, variables, module parameters, ... */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + /* Module and version information */ #define DRV_NAME "iTCO_wdt" #define DRV_VERSION "1.07" -#define PFX DRV_NAME ": " /* Includes */ #include <linux/module.h> /* For module specific items */ @@ -413,8 +414,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. " "5..76 (TCO v1) or 3..614 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -489,8 +490,7 @@ static int iTCO_wdt_start(void) /* disable chipset's NO_REBOOT bit */ if (iTCO_wdt_unset_NO_REBOOT_bit()) { spin_unlock(&iTCO_wdt_private.io_lock); - printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, " - "reboot disabled by hardware/BIOS\n"); + pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n"); return -EIO; } @@ -661,8 +661,7 @@ static int iTCO_wdt_release(struct inode *inode, struct file *file) if (expect_release == 42) { iTCO_wdt_stop(); } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); iTCO_wdt_keepalive(); } clear_bit(0, &is_active); @@ -804,8 +803,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, base_address &= 0x0000ff80; if (base_address == 0x00000000) { /* Something's wrong here, ACPIBASE has to be set */ - printk(KERN_ERR PFX "failed to get TCOBASE address, " - "device disabled by hardware/BIOS\n"); + pr_err("failed to get TCOBASE address, device disabled by hardware/BIOS\n"); return -ENODEV; } iTCO_wdt_private.iTCO_version = @@ -820,8 +818,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, if (iTCO_wdt_private.iTCO_version == 2) { pci_read_config_dword(pdev, 0xf0, &base_address); if ((base_address & 1) == 0) { - printk(KERN_ERR PFX "RCBA is disabled by hardware" - "/BIOS, device disabled\n"); + pr_err("RCBA is disabled by hardware/BIOS, device disabled\n"); ret = -ENODEV; goto out; } @@ -831,8 +828,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* Check chipset's NO_REBOOT bit */ if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) { - printk(KERN_INFO PFX "unable to reset NO_REBOOT flag, " - "device disabled by hardware/BIOS\n"); + pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n"); ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ goto out_unmap; } @@ -842,9 +838,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { - printk(KERN_ERR PFX - "I/O address 0x%04lx already in use, " - "device disabled\n", SMI_EN); + pr_err("I/O address 0x%04lx already in use, device disabled\n", + SMI_EN); ret = -EIO; goto out_unmap; } @@ -858,17 +853,16 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ if (!request_region(TCOBASE, 0x20, "iTCO_wdt")) { - printk(KERN_ERR PFX "I/O address 0x%04lx already in use " - "device disabled\n", TCOBASE); + pr_err("I/O address 0x%04lx already in use, device disabled\n", + TCOBASE); ret = -EIO; goto unreg_smi_en; } - printk(KERN_INFO PFX - "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", - iTCO_chipset_info[ent->driver_data].name, - iTCO_chipset_info[ent->driver_data].iTCO_version, - TCOBASE); + pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", + iTCO_chipset_info[ent->driver_data].name, + iTCO_chipset_info[ent->driver_data].iTCO_version, + TCOBASE); /* Clear out the (probably old) status */ outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */ @@ -882,20 +876,18 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, if not reset to the default */ if (iTCO_wdt_set_heartbeat(heartbeat)) { iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT); - printk(KERN_INFO PFX - "timeout value out of range, using %d\n", heartbeat); + pr_info("timeout value out of range, using %d\n", heartbeat); } ret = misc_register(&iTCO_wdt_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_region; } - printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", - heartbeat, nowayout); + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); return 0; @@ -947,7 +939,7 @@ static int __devinit iTCO_wdt_probe(struct platform_device *dev) } if (!found) - printk(KERN_INFO PFX "No device detected.\n"); + pr_info("No device detected\n"); return ret; } @@ -979,8 +971,7 @@ static int __init iTCO_wdt_init_module(void) { int err; - printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n", - DRV_VERSION); + pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION); err = platform_driver_register(&iTCO_wdt_driver); if (err) @@ -1004,7 +995,7 @@ static void __exit iTCO_wdt_cleanup_module(void) { platform_device_unregister(iTCO_wdt_platform_device); platform_driver_unregister(&iTCO_wdt_driver); - printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); + pr_info("Watchdog Module Unloaded\n"); } module_init(iTCO_wdt_init_module); diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 0149d8d..184c0bf 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -31,6 +31,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/miscdevice.h> @@ -44,7 +46,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> static struct platform_device *ibwdt_platform_device; static unsigned long ibwdt_is_open; @@ -53,7 +54,6 @@ static char expect_close; /* Module information */ #define DRV_NAME "ib700wdt" -#define PFX DRV_NAME ": " /* * @@ -102,8 +102,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 0<= timeout <=30, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -246,8 +246,7 @@ static int ibwdt_close(struct inode *inode, struct file *file) if (expect_close == 42) { ibwdt_disable(); } else { - printk(KERN_CRIT PFX - "WDT device closed unexpectedly. WDT will not stop!\n"); + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); ibwdt_ping(); } clear_bit(0, &ibwdt_is_open); @@ -284,16 +283,14 @@ static int __devinit ibwdt_probe(struct platform_device *dev) #if WDT_START != WDT_STOP if (!request_region(WDT_STOP, 1, "IB700 WDT")) { - printk(KERN_ERR PFX "STOP method I/O %X is not available.\n", - WDT_STOP); + pr_err("STOP method I/O %X is not available\n", WDT_STOP); res = -EIO; goto out_nostopreg; } #endif if (!request_region(WDT_START, 1, "IB700 WDT")) { - printk(KERN_ERR PFX "START method I/O %X is not available.\n", - WDT_START); + pr_err("START method I/O %X is not available\n", WDT_START); res = -EIO; goto out_nostartreg; } @@ -302,13 +299,12 @@ static int __devinit ibwdt_probe(struct platform_device *dev) * if not reset to the default */ if (ibwdt_set_heartbeat(timeout)) { ibwdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be 0<=x<=30, using %d\n", timeout); + pr_info("timeout value must be 0<=x<=30, using %d\n", timeout); } res = misc_register(&ibwdt_miscdev); if (res) { - printk(KERN_ERR PFX "failed to register misc device\n"); + pr_err("failed to register misc device\n"); goto out_nomisc; } return 0; @@ -353,8 +349,7 @@ static int __init ibwdt_init(void) { int err; - printk(KERN_INFO PFX - "WDT driver for IB700 single board computer initialising.\n"); + pr_info("WDT driver for IB700 single board computer initialising\n"); err = platform_driver_register(&ibwdt_driver); if (err) @@ -378,7 +373,7 @@ static void __exit ibwdt_exit(void) { platform_device_unregister(ibwdt_platform_device); platform_driver_unregister(&ibwdt_driver); - printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); + pr_info("Watchdog Module Unloaded\n"); } module_init(ibwdt_init); diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index c7481ad..bc3fb8f 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -10,6 +10,8 @@ * of the GNU Public License, incorporated herein by reference. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/fs.h> #include <linux/kernel.h> #include <linux/module.h> @@ -31,8 +33,6 @@ enum { ASMTYPE_SPRUCE, }; -#define PFX "ibmasr: " - #define TOPAZ_ASR_REG_OFFSET 4 #define TOPAZ_ASR_TOGGLE 0x40 #define TOPAZ_ASR_DISABLE 0x80 @@ -60,7 +60,7 @@ enum { #define SPRUCE_ASR_TOGGLE_MASK 0x02 /* bit 0: 0, then 1, then 0 */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned long asr_is_open; static char asr_expect_close; @@ -234,12 +234,11 @@ static int __init asr_get_base_address(void) } if (!request_region(asr_base, asr_length, "ibmasr")) { - printk(KERN_ERR PFX "address %#x already in use\n", - asr_base); + pr_err("address %#x already in use\n", asr_base); return -EBUSY; } - printk(KERN_INFO PFX "found %sASR @ addr %#x\n", type, asr_base); + pr_info("found %sASR @ addr %#x\n", type, asr_base); return 0; } @@ -332,8 +331,7 @@ static int asr_release(struct inode *inode, struct file *file) if (asr_expect_close == 42) asr_disable(); else { - printk(KERN_CRIT PFX - "unexpected close, not stopping watchdog!\n"); + pr_crit("unexpected close, not stopping watchdog!\n"); asr_toggle(); } clear_bit(0, &asr_is_open); @@ -393,7 +391,7 @@ static int __init ibmasr_init(void) rc = misc_register(&asr_miscdev); if (rc < 0) { release_region(asr_base, asr_length); - printk(KERN_ERR PFX "failed to register misc device\n"); + pr_err("failed to register misc device\n"); return rc; } @@ -413,7 +411,7 @@ static void __exit ibmasr_exit(void) module_init(ibmasr_init); module_exit(ibmasr_exit); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c index c44c333..7a2b734 100644 --- a/drivers/watchdog/imx2_wdt.c +++ b/drivers/watchdog/imx2_wdt.c @@ -46,6 +46,9 @@ #define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */ #define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */ +#define IMX2_WDT_WRSR 0x04 /* Reset Status Register */ +#define IMX2_WDT_WRSR_TOUT (1 << 1) /* -> Reset due to Timeout */ + #define IMX2_WDT_MAX_TIME 128 #define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */ @@ -65,8 +68,8 @@ static struct { static struct miscdevice imx2_wdt_miscdev; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -175,6 +178,7 @@ static long imx2_wdt_ioctl(struct file *file, unsigned int cmd, void __user *argp = (void __user *)arg; int __user *p = argp; int new_value; + u16 val; switch (cmd) { case WDIOC_GETSUPPORT: @@ -182,9 +186,13 @@ static long imx2_wdt_ioctl(struct file *file, unsigned int cmd, sizeof(struct watchdog_info)) ? -EFAULT : 0; case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: return put_user(0, p); + case WDIOC_GETBOOTSTATUS: + val = __raw_readw(imx2_wdt.base + IMX2_WDT_WRSR); + new_value = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0; + return put_user(new_value, p); + case WDIOC_KEEPALIVE: imx2_wdt_ping(); return 0; diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c index 1475e09..6d90f7a 100644 --- a/drivers/watchdog/indydog.c +++ b/drivers/watchdog/indydog.c @@ -12,6 +12,8 @@ * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -26,14 +28,13 @@ #include <linux/uaccess.h> #include <asm/sgi/mc.h> -#define PFX "indydog: " static unsigned long indydog_alive; static DEFINE_SPINLOCK(indydog_lock); #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -60,7 +61,7 @@ static void indydog_stop(void) sgimc->cpuctrl0 = mc_ctrl0; spin_unlock(&indydog_lock); - printk(KERN_INFO PFX "Stopped watchdog timer.\n"); + pr_info("Stopped watchdog timer\n"); } static void indydog_ping(void) @@ -83,7 +84,7 @@ static int indydog_open(struct inode *inode, struct file *file) indydog_start(); indydog_ping(); - printk(KERN_INFO "Started watchdog timer.\n"); + pr_info("Started watchdog timer\n"); return nonseekable_open(inode, file); } @@ -178,30 +179,25 @@ static struct notifier_block indydog_notifier = { .notifier_call = indydog_notify_sys, }; -static char banner[] __initdata = - KERN_INFO PFX "Hardware Watchdog Timer for SGI IP22: 0.3\n"; - static int __init watchdog_init(void) { int ret; ret = register_reboot_notifier(&indydog_notifier); if (ret) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); return ret; } ret = misc_register(&indydog_miscdev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); unregister_reboot_notifier(&indydog_notifier); return ret; } - printk(banner); + pr_info("Hardware Watchdog Timer for SGI IP22: 0.3\n"); return 0; } diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c index 1abdc04..9dda2d0 100644 --- a/drivers/watchdog/intel_scu_watchdog.c +++ b/drivers/watchdog/intel_scu_watchdog.c @@ -22,6 +22,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/compiler.h> #include <linux/module.h> #include <linux/kernel.h> @@ -96,15 +98,14 @@ static struct intel_scu_watchdog_dev watchdog_device; static void watchdog_fire(void) { if (force_boot) { - printk(KERN_CRIT PFX "Initiating system reboot.\n"); + pr_crit("Initiating system reboot\n"); emergency_restart(); - printk(KERN_CRIT PFX "Reboot didn't ?????\n"); + pr_crit("Reboot didn't ?????\n"); } else { - printk(KERN_CRIT PFX "Immediate Reboot Disabled\n"); - printk(KERN_CRIT PFX - "System will reset when watchdog timer times out!\n"); + pr_crit("Immediate Reboot Disabled\n"); + pr_crit("System will reset when watchdog timer times out!\n"); } } @@ -112,8 +113,8 @@ static int check_timer_margin(int new_margin) { if ((new_margin < MIN_TIME_CYCLE) || (new_margin > MAX_TIME - timer_set)) { - pr_debug("Watchdog timer: value of new_margin %d is out of the range %d to %d\n", - new_margin, MIN_TIME_CYCLE, MAX_TIME - timer_set); + pr_debug("value of new_margin %d is out of the range %d to %d\n", + new_margin, MIN_TIME_CYCLE, MAX_TIME - timer_set); return -EINVAL; } return 0; @@ -156,14 +157,14 @@ static irqreturn_t watchdog_timer_interrupt(int irq, void *dev_id) int int_status; int_status = ioread32(watchdog_device.timer_interrupt_status_addr); - pr_debug("Watchdog timer: irq, int_status: %x\n", int_status); + pr_debug("irq, int_status: %x\n", int_status); if (int_status != 0) return IRQ_NONE; /* has the timer been started? If not, then this is spurious */ if (watchdog_device.timer_started == 0) { - pr_debug("Watchdog timer: spurious interrupt received\n"); + pr_debug("spurious interrupt received\n"); return IRQ_HANDLED; } @@ -220,16 +221,15 @@ static int intel_scu_set_heartbeat(u32 t) (watchdog_device.timer_set - timer_margin) * watchdog_device.timer_tbl_ptr->freq_hz; - pr_debug("Watchdog timer: set_heartbeat: timer freq is %d\n", - watchdog_device.timer_tbl_ptr->freq_hz); - pr_debug("Watchdog timer: set_heartbeat: timer_set is %x (hex)\n", - watchdog_device.timer_set); - pr_debug("Watchdog timer: set_hearbeat: timer_margin is %x (hex)\n", - timer_margin); - pr_debug("Watchdog timer: set_heartbeat: threshold is %x (hex)\n", - watchdog_device.threshold); - pr_debug("Watchdog timer: set_heartbeat: soft_threshold is %x (hex)\n", - watchdog_device.soft_threshold); + pr_debug("set_heartbeat: timer freq is %d\n", + watchdog_device.timer_tbl_ptr->freq_hz); + pr_debug("set_heartbeat: timer_set is %x (hex)\n", + watchdog_device.timer_set); + pr_debug("set_hearbeat: timer_margin is %x (hex)\n", timer_margin); + pr_debug("set_heartbeat: threshold is %x (hex)\n", + watchdog_device.threshold); + pr_debug("set_heartbeat: soft_threshold is %x (hex)\n", + watchdog_device.soft_threshold); /* Adjust thresholds by FREQ_ADJUSTMENT factor, to make the */ /* watchdog timing come out right. */ @@ -264,7 +264,7 @@ static int intel_scu_set_heartbeat(u32 t) if (MAX_RETRY < retry_count++) { /* Unable to set timer value */ - pr_err("Watchdog timer: Unable to set timer\n"); + pr_err("Unable to set timer\n"); return -ENODEV; } @@ -321,18 +321,17 @@ static int intel_scu_release(struct inode *inode, struct file *file) */ if (!test_and_clear_bit(0, &watchdog_device.driver_open)) { - pr_debug("Watchdog timer: intel_scu_release, without open\n"); + pr_debug("intel_scu_release, without open\n"); return -ENOTTY; } if (!watchdog_device.timer_started) { /* Just close, since timer has not been started */ - pr_debug("Watchdog timer: closed, without starting timer\n"); + pr_debug("closed, without starting timer\n"); return 0; } - printk(KERN_CRIT PFX - "Unexpected close of /dev/watchdog!\n"); + pr_crit("Unexpected close of /dev/watchdog!\n"); /* Since the timer was started, prevent future reopens */ watchdog_device.driver_closed = 1; @@ -454,9 +453,8 @@ static int __init intel_scu_watchdog_init(void) /* Check value of timer_set boot parameter */ if ((timer_set < MIN_TIME_CYCLE) || (timer_set > MAX_TIME - MIN_TIME_CYCLE)) { - pr_err("Watchdog timer: value of timer_set %x (hex) " - "is out of range from %x to %x (hex)\n", - timer_set, MIN_TIME_CYCLE, MAX_TIME - MIN_TIME_CYCLE); + pr_err("value of timer_set %x (hex) is out of range from %x to %x (hex)\n", + timer_set, MIN_TIME_CYCLE, MAX_TIME - MIN_TIME_CYCLE); return -EINVAL; } @@ -467,19 +465,18 @@ static int __init intel_scu_watchdog_init(void) watchdog_device.timer_tbl_ptr = sfi_get_mtmr(sfi_mtimer_num-1); if (watchdog_device.timer_tbl_ptr == NULL) { - pr_debug("Watchdog timer - Intel SCU watchdog: timer is not available\n"); + pr_debug("timer is not available\n"); return -ENODEV; } /* make sure the timer exists */ if (watchdog_device.timer_tbl_ptr->phys_addr == 0) { - pr_debug("Watchdog timer - Intel SCU watchdog - timer %d does not have valid physical memory\n", - sfi_mtimer_num); + pr_debug("timer %d does not have valid physical memory\n", + sfi_mtimer_num); return -ENODEV; } if (watchdog_device.timer_tbl_ptr->irq == 0) { - pr_debug("Watchdog timer: timer %d invalid irq\n", - sfi_mtimer_num); + pr_debug("timer %d invalid irq\n", sfi_mtimer_num); return -ENODEV; } @@ -487,7 +484,7 @@ static int __init intel_scu_watchdog_init(void) 20); if (tmp_addr == NULL) { - pr_debug("Watchdog timer: timer unable to ioremap\n"); + pr_debug("timer unable to ioremap\n"); return -ENOMEM; } @@ -512,7 +509,7 @@ static int __init intel_scu_watchdog_init(void) ret = register_reboot_notifier(&watchdog_device.intel_scu_notifier); if (ret) { - pr_err("Watchdog timer: cannot register notifier %d)\n", ret); + pr_err("cannot register notifier %d)\n", ret); goto register_reboot_error; } @@ -522,8 +519,8 @@ static int __init intel_scu_watchdog_init(void) ret = misc_register(&watchdog_device.miscdev); if (ret) { - pr_err("Watchdog timer: cannot register miscdev %d err =%d\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev %d err =%d\n", + WATCHDOG_MINOR, ret); goto misc_register_error; } @@ -532,7 +529,7 @@ static int __init intel_scu_watchdog_init(void) IRQF_SHARED, "watchdog", &watchdog_device.timer_load_count_addr); if (ret) { - pr_err("Watchdog timer: error requesting irq %d\n", ret); + pr_err("error requesting irq %d\n", ret); goto request_irq_error; } /* Make sure timer is disabled before returning */ diff --git a/drivers/watchdog/intel_scu_watchdog.h b/drivers/watchdog/intel_scu_watchdog.h index d2b074a..f3ac608 100644 --- a/drivers/watchdog/intel_scu_watchdog.h +++ b/drivers/watchdog/intel_scu_watchdog.h @@ -25,7 +25,6 @@ #ifndef __INTEL_SCU_WATCHDOG_H #define __INTEL_SCU_WATCHDOG_H -#define PFX "Intel_SCU: " #define WDT_VER "0.3" /* minimum time between interrupts */ diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c index 82fa7a9..d964faf 100644 --- a/drivers/watchdog/iop_wdt.c +++ b/drivers/watchdog/iop_wdt.c @@ -24,6 +24,8 @@ * Dan Williams <dan.j.williams@intel.com> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/fs.h> @@ -34,7 +36,7 @@ #include <linux/uaccess.h> #include <mach/hardware.h> -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned long wdt_status; static unsigned long boot_status; static DEFINE_SPINLOCK(wdt_lock); @@ -85,7 +87,7 @@ static int wdt_disable(void) write_wdtcr(IOP_WDTCR_DIS); clear_bit(WDT_ENABLED, &wdt_status); spin_unlock(&wdt_lock); - printk(KERN_INFO "WATCHDOG: Disabled\n"); + pr_info("Disabled\n"); return 0; } else return 1; @@ -197,8 +199,8 @@ static int iop_wdt_release(struct inode *inode, struct file *file) */ if (state != 0) { wdt_enable(); - printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " - "reset in %lu seconds\n", iop_watchdog_timeout()); + pr_crit("Device closed unexpectedly - reset in %lu seconds\n", + iop_watchdog_timeout()); } clear_bit(WDT_IN_USE, &wdt_status); @@ -238,8 +240,7 @@ static int __init iop_wdt_init(void) with an open */ ret = misc_register(&iop_wdt_miscdev); if (ret == 0) - printk(KERN_INFO "iop watchdog timer: timeout %lu sec\n", - iop_watchdog_timeout()); + pr_info("timeout %lu sec\n", iop_watchdog_timeout()); return ret; } @@ -252,7 +253,7 @@ static void __exit iop_wdt_exit(void) module_init(iop_wdt_init); module_exit(iop_wdt_exit); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_AUTHOR("Curt E Bruns <curt.e.bruns@intel.com>"); diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 8d2d850..f4cce6d 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -20,6 +20,8 @@ * software is provided AS-IS with no warranties. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> @@ -33,6 +35,7 @@ #include <linux/io.h> #include <linux/ioport.h> +#define DEBUG #define NAME "it8712f_wdt" MODULE_AUTHOR("Jorge Boncompte - DTI2 <jorge@dti2.net>"); @@ -45,8 +48,8 @@ static int margin = 60; /* in seconds */ module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); static unsigned long wdt_open; @@ -158,10 +161,10 @@ static void it8712f_wdt_update_margin(void) */ if (units <= max_units) { config |= WDT_UNIT_SEC; /* else UNIT is MINUTES */ - printk(KERN_INFO NAME ": timer margin %d seconds\n", units); + pr_info("timer margin %d seconds\n", units); } else { units /= 60; - printk(KERN_INFO NAME ": timer margin %d minutes\n", units); + pr_info("timer margin %d minutes\n", units); } superio_outb(config, WDT_CONFIG); @@ -184,7 +187,7 @@ static int it8712f_wdt_enable(void) if (ret) return ret; - printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); + pr_debug("enabling watchdog timer\n"); superio_select(LDN_GPIO); superio_outb(wdt_control_reg, WDT_CONTROL); @@ -204,7 +207,7 @@ static int it8712f_wdt_disable(void) if (ret) return ret; - printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); + pr_debug("disabling watchdog timer\n"); superio_select(LDN_GPIO); superio_outb(0, WDT_CONFIG); @@ -331,12 +334,10 @@ static int it8712f_wdt_open(struct inode *inode, struct file *file) static int it8712f_wdt_release(struct inode *inode, struct file *file) { if (expect_close != 42) { - printk(KERN_WARNING NAME - ": watchdog device closed unexpectedly, will not" - " disable the watchdog timer\n"); + pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); } else if (!nowayout) { if (it8712f_wdt_disable()) - printk(KERN_WARNING NAME "Watchdog disable failed\n"); + pr_warn("Watchdog disable failed\n"); } expect_close = 0; clear_bit(0, &wdt_open); @@ -374,13 +375,13 @@ static int __init it8712f_wdt_find(unsigned short *address) superio_select(LDN_GAME); superio_outb(1, ACT_REG); if (!(superio_inb(ACT_REG) & 0x01)) { - printk(KERN_ERR NAME ": Device not activated, skipping\n"); + pr_err("Device not activated, skipping\n"); goto exit; } *address = superio_inw(BASE_REG); if (*address == 0) { - printk(KERN_ERR NAME ": Base address not set, skipping\n"); + pr_err("Base address not set, skipping\n"); goto exit; } @@ -394,8 +395,7 @@ static int __init it8712f_wdt_find(unsigned short *address) if (margin > (max_units * 60)) margin = (max_units * 60); - printk(KERN_INFO NAME ": Found IT%04xF chip revision %d - " - "using DogFood address 0x%x\n", + pr_info("Found IT%04xF chip revision %d - using DogFood address 0x%x\n", chip_type, revision, *address); exit: @@ -411,27 +411,26 @@ static int __init it8712f_wdt_init(void) return -ENODEV; if (!request_region(address, 1, "IT8712F Watchdog")) { - printk(KERN_WARNING NAME ": watchdog I/O region busy\n"); + pr_warn("watchdog I/O region busy\n"); return -EBUSY; } err = it8712f_wdt_disable(); if (err) { - printk(KERN_ERR NAME ": unable to disable watchdog timer.\n"); + pr_err("unable to disable watchdog timer\n"); goto out; } err = register_reboot_notifier(&it8712f_wdt_notifier); if (err) { - printk(KERN_ERR NAME ": unable to register reboot notifier\n"); + pr_err("unable to register reboot notifier\n"); goto out; } err = misc_register(&it8712f_wdt_miscdev); if (err) { - printk(KERN_ERR NAME - ": cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, err); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, err); goto reboot_out; } diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c index a2d9a12..8a741bc 100644 --- a/drivers/watchdog/it87_wdt.c +++ b/drivers/watchdog/it87_wdt.c @@ -29,6 +29,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -43,11 +45,9 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <asm/system.h> #define WATCHDOG_VERSION "1.14" #define WATCHDOG_NAME "IT87 WDT" -#define PFX WATCHDOG_NAME ": " #define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" #define WD_MAGIC 'V' @@ -142,7 +142,7 @@ static int nogameport = DEFAULT_NOGAMEPORT; static int exclusive = DEFAULT_EXCLUSIVE; static int timeout = DEFAULT_TIMEOUT; static int testmode = DEFAULT_TESTMODE; -static int nowayout = DEFAULT_NOWAYOUT; +static bool nowayout = DEFAULT_NOWAYOUT; module_param(nogameport, int, 0); MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default=" @@ -156,7 +156,7 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" module_param(testmode, int, 0); MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" __MODULE_STRING(DEFAULT_TESTMODE)); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" __MODULE_STRING(WATCHDOG_NOWAYOUT)); @@ -428,8 +428,7 @@ static int wdt_release(struct inode *inode, struct file *file) clear_bit(WDTS_TIMER_RUN, &wdt_status); } else { wdt_keepalive(); - printk(KERN_CRIT PFX - "unexpected close, not stopping watchdog!\n"); + pr_crit("unexpected close, not stopping watchdog!\n"); } } clear_bit(WDTS_DEV_OPEN, &wdt_status); @@ -621,16 +620,14 @@ static int __init it87_wdt_init(void) try_gameport = 0; break; case IT8705_ID: - printk(KERN_ERR PFX - "Unsupported Chip found, Chip %04x Revision %02x\n", + pr_err("Unsupported Chip found, Chip %04x Revision %02x\n", chip_type, chip_rev); return -ENODEV; case NO_DEV_ID: - printk(KERN_ERR PFX "no device\n"); + pr_err("no device\n"); return -ENODEV; default: - printk(KERN_ERR PFX - "Unknown Chip found, Chip %04x Revision %04x\n", + pr_err("Unknown Chip found, Chip %04x Revision %04x\n", chip_type, chip_rev); return -ENODEV; } @@ -663,13 +660,11 @@ static int __init it87_wdt_init(void) if (!test_bit(WDTS_USE_GP, &wdt_status)) { if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) { if (gp_rreq_fail) - printk(KERN_ERR PFX - "I/O Address 0x%04x and 0x%04x" - " already in use\n", base, CIR_BASE); + pr_err("I/O Address 0x%04x and 0x%04x already in use\n", + base, CIR_BASE); else - printk(KERN_ERR PFX - "I/O Address 0x%04x already in use\n", - CIR_BASE); + pr_err("I/O Address 0x%04x already in use\n", + CIR_BASE); rc = -EIO; goto err_out; } @@ -688,9 +683,8 @@ static int __init it87_wdt_init(void) if (timeout < 1 || timeout > max_units * 60) { timeout = DEFAULT_TIMEOUT; - printk(KERN_WARNING PFX - "Timeout value out of range, use default %d sec\n", - DEFAULT_TIMEOUT); + pr_warn("Timeout value out of range, use default %d sec\n", + DEFAULT_TIMEOUT); } if (timeout > max_units) @@ -698,16 +692,14 @@ static int __init it87_wdt_init(void) rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX - "Cannot register reboot notifier (err=%d)\n", rc); + pr_err("Cannot register reboot notifier (err=%d)\n", rc); goto err_out_region; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR PFX - "Cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + pr_err("Cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } @@ -722,9 +714,8 @@ static int __init it87_wdt_init(void) outb(0x09, CIR_IER(base)); } - printk(KERN_INFO PFX "Chip IT%04x revision %d initialized. " - "timeout=%d sec (nowayout=%d testmode=%d exclusive=%d " - "nogameport=%d)\n", chip_type, chip_rev, timeout, + pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d exclusive=%d nogameport=%d)\n", + chip_type, chip_rev, timeout, nowayout, testmode, exclusive, nogameport); superio_exit(); diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c index 084f71aa..3f047a5 100644 --- a/drivers/watchdog/ixp2000_wdt.c +++ b/drivers/watchdog/ixp2000_wdt.c @@ -16,6 +16,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -29,7 +31,7 @@ #include <linux/uaccess.h> #include <mach/hardware.h> -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int heartbeat = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; static DEFINE_SPINLOCK(wdt_lock); @@ -158,8 +160,7 @@ static int ixp2000_wdt_release(struct inode *inode, struct file *file) if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_disable(); else - printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " - "timer will not stop\n"); + pr_crit("Device closed unexpectedly - timer will not stop\n"); clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -185,7 +186,7 @@ static struct miscdevice ixp2000_wdt_miscdev = { static int __init ixp2000_wdt_init(void) { if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { - printk(KERN_INFO "Unable to use IXP2000 watchdog due to IXP2800 erratum #25.\n"); + pr_info("Unable to use IXP2000 watchdog due to IXP2800 erratum #25\n"); return -EIO; } wdt_tick_rate = (*IXP2000_T1_CLD * HZ) / 256; @@ -206,7 +207,7 @@ MODULE_DESCRIPTION("IXP2000 Network Processor Watchdog"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index 4fc2e9a..5580b4f 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -13,6 +13,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -25,7 +27,7 @@ #include <linux/uaccess.h> #include <mach/hardware.h> -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; static unsigned long boot_status; @@ -147,8 +149,7 @@ static int ixp4xx_wdt_release(struct inode *inode, struct file *file) if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_disable(); else - printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " - "timer will not stop\n"); + pr_crit("Device closed unexpectedly - timer will not stop\n"); clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -176,8 +177,7 @@ static int __init ixp4xx_wdt_init(void) int ret; if (!(read_cpuid_id() & 0xf) && !cpu_is_ixp46x()) { - printk(KERN_ERR "IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected" - " - watchdog disabled\n"); + pr_err("Rev. A0 IXP42x CPU detected - watchdog disabled\n"); return -ENODEV; } @@ -185,8 +185,7 @@ static int __init ixp4xx_wdt_init(void) WDIOF_CARDRESET : 0; ret = misc_register(&ixp4xx_wdt_miscdev); if (ret == 0) - printk(KERN_INFO "IXP4xx Watchdog Timer: heartbeat %d sec\n", - heartbeat); + pr_info("timer heartbeat %d sec\n", heartbeat); return ret; } @@ -205,7 +204,7 @@ MODULE_DESCRIPTION("IXP4xx Network Processor Watchdog"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c index 17ef300..978615e 100644 --- a/drivers/watchdog/jz4740_wdt.c +++ b/drivers/watchdog/jz4740_wdt.c @@ -17,18 +17,15 @@ #include <linux/moduleparam.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/fs.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/init.h> -#include <linux/bitops.h> #include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/uaccess.h> #include <linux/io.h> #include <linux/device.h> #include <linux/clk.h> #include <linux/slab.h> +#include <linux/err.h> #include <asm/mach-jz4740/timer.h> @@ -41,9 +38,6 @@ #define JZ_WDT_CLOCK_RTC 0x2 #define JZ_WDT_CLOCK_EXT 0x4 -#define WDT_IN_USE 0 -#define WDT_OK_TO_CLOSE 1 - #define JZ_WDT_CLOCK_DIV_SHIFT 3 #define JZ_WDT_CLOCK_DIV_1 (0 << JZ_WDT_CLOCK_DIV_SHIFT) @@ -56,32 +50,44 @@ #define DEFAULT_HEARTBEAT 5 #define MAX_HEARTBEAT 2048 -static struct { - void __iomem *base; - struct resource *mem; - struct clk *rtc_clk; - unsigned long status; -} jz4740_wdt; +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -static int heartbeat = DEFAULT_HEARTBEAT; +static unsigned int heartbeat = DEFAULT_HEARTBEAT; +module_param(heartbeat, uint, 0); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat period in seconds from 1 to " + __MODULE_STRING(MAX_HEARTBEAT) ", default " + __MODULE_STRING(DEFAULT_HEARTBEAT)); +struct jz4740_wdt_drvdata { + struct watchdog_device wdt; + void __iomem *base; + struct clk *rtc_clk; +}; -static void jz4740_wdt_service(void) +static int jz4740_wdt_ping(struct watchdog_device *wdt_dev) { - writew(0x0, jz4740_wdt.base + JZ_REG_WDT_TIMER_COUNTER); + struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + + writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER); + return 0; } -static void jz4740_wdt_set_heartbeat(int new_heartbeat) +static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int new_timeout) { + struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); unsigned int rtc_clk_rate; unsigned int timeout_value; unsigned short clock_div = JZ_WDT_CLOCK_DIV_1; - heartbeat = new_heartbeat; - - rtc_clk_rate = clk_get_rate(jz4740_wdt.rtc_clk); + rtc_clk_rate = clk_get_rate(drvdata->rtc_clk); - timeout_value = rtc_clk_rate * heartbeat; + timeout_value = rtc_clk_rate * new_timeout; while (timeout_value > 0xffff) { if (clock_div == JZ_WDT_CLOCK_DIV_1024) { /* Requested timeout too high; @@ -93,199 +99,115 @@ static void jz4740_wdt_set_heartbeat(int new_heartbeat) clock_div += (1 << JZ_WDT_CLOCK_DIV_SHIFT); } - writeb(0x0, jz4740_wdt.base + JZ_REG_WDT_COUNTER_ENABLE); - writew(clock_div, jz4740_wdt.base + JZ_REG_WDT_TIMER_CONTROL); + writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE); + writew(clock_div, drvdata->base + JZ_REG_WDT_TIMER_CONTROL); - writew((u16)timeout_value, jz4740_wdt.base + JZ_REG_WDT_TIMER_DATA); - writew(0x0, jz4740_wdt.base + JZ_REG_WDT_TIMER_COUNTER); + writew((u16)timeout_value, drvdata->base + JZ_REG_WDT_TIMER_DATA); + writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER); writew(clock_div | JZ_WDT_CLOCK_RTC, - jz4740_wdt.base + JZ_REG_WDT_TIMER_CONTROL); + drvdata->base + JZ_REG_WDT_TIMER_CONTROL); - writeb(0x1, jz4740_wdt.base + JZ_REG_WDT_COUNTER_ENABLE); -} + writeb(0x1, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE); -static void jz4740_wdt_enable(void) -{ - jz4740_timer_enable_watchdog(); - jz4740_wdt_set_heartbeat(heartbeat); -} - -static void jz4740_wdt_disable(void) -{ - jz4740_timer_disable_watchdog(); - writeb(0x0, jz4740_wdt.base + JZ_REG_WDT_COUNTER_ENABLE); + wdt_dev->timeout = new_timeout; + return 0; } -static int jz4740_wdt_open(struct inode *inode, struct file *file) +static int jz4740_wdt_start(struct watchdog_device *wdt_dev) { - if (test_and_set_bit(WDT_IN_USE, &jz4740_wdt.status)) - return -EBUSY; - - jz4740_wdt_enable(); + jz4740_timer_enable_watchdog(); + jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout); - return nonseekable_open(inode, file); + return 0; } -static ssize_t jz4740_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) +static int jz4740_wdt_stop(struct watchdog_device *wdt_dev) { - if (len) { - size_t i; - - clear_bit(WDT_OK_TO_CLOSE, &jz4740_wdt.status); - for (i = 0; i != len; i++) { - char c; + struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); - if (get_user(c, data + i)) - return -EFAULT; - - if (c == 'V') - set_bit(WDT_OK_TO_CLOSE, &jz4740_wdt.status); - } - jz4740_wdt_service(); - } + jz4740_timer_disable_watchdog(); + writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE); - return len; + return 0; } -static const struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING, +static const struct watchdog_info jz4740_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .identity = "jz4740 Watchdog", }; -static long jz4740_wdt_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - int ret = -ENOTTY; - int heartbeat_seconds; - - switch (cmd) { - case WDIOC_GETSUPPORT: - ret = copy_to_user((struct watchdog_info *)arg, &ident, - sizeof(ident)) ? -EFAULT : 0; - break; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - ret = put_user(0, (int *)arg); - break; - - case WDIOC_KEEPALIVE: - jz4740_wdt_service(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(heartbeat_seconds, (int __user *)arg)) - return -EFAULT; - - jz4740_wdt_set_heartbeat(heartbeat_seconds); - return 0; - - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, (int *)arg); - - default: - break; - } - - return ret; -} - -static int jz4740_wdt_release(struct inode *inode, struct file *file) -{ - jz4740_wdt_service(); - - if (test_and_clear_bit(WDT_OK_TO_CLOSE, &jz4740_wdt.status)) - jz4740_wdt_disable(); - - clear_bit(WDT_IN_USE, &jz4740_wdt.status); - return 0; -} - -static const struct file_operations jz4740_wdt_fops = { +static const struct watchdog_ops jz4740_wdt_ops = { .owner = THIS_MODULE, - .llseek = no_llseek, - .write = jz4740_wdt_write, - .unlocked_ioctl = jz4740_wdt_ioctl, - .open = jz4740_wdt_open, - .release = jz4740_wdt_release, -}; - -static struct miscdevice jz4740_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &jz4740_wdt_fops, + .start = jz4740_wdt_start, + .stop = jz4740_wdt_stop, + .ping = jz4740_wdt_ping, + .set_timeout = jz4740_wdt_set_timeout, }; static int __devinit jz4740_wdt_probe(struct platform_device *pdev) { - int ret = 0, size; - struct resource *res; - struct device *dev = &pdev->dev; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(dev, "failed to get memory region resource\n"); - return -ENXIO; + struct jz4740_wdt_drvdata *drvdata; + struct watchdog_device *jz4740_wdt; + struct resource *res; + int ret; + + drvdata = devm_kzalloc(&pdev->dev, sizeof(struct jz4740_wdt_drvdata), + GFP_KERNEL); + if (!drvdata) { + dev_err(&pdev->dev, "Unable to alloacate watchdog device\n"); + return -ENOMEM; } - size = resource_size(res); - jz4740_wdt.mem = request_mem_region(res->start, size, pdev->name); - if (jz4740_wdt.mem == NULL) { - dev_err(dev, "failed to get memory region\n"); - return -EBUSY; - } + if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) + heartbeat = DEFAULT_HEARTBEAT; - jz4740_wdt.base = ioremap_nocache(res->start, size); - if (jz4740_wdt.base == NULL) { - dev_err(dev, "failed to map memory region\n"); + jz4740_wdt = &drvdata->wdt; + jz4740_wdt->info = &jz4740_wdt_info; + jz4740_wdt->ops = &jz4740_wdt_ops; + jz4740_wdt->timeout = heartbeat; + jz4740_wdt->min_timeout = 1; + jz4740_wdt->max_timeout = MAX_HEARTBEAT; + watchdog_set_nowayout(jz4740_wdt, nowayout); + watchdog_set_drvdata(jz4740_wdt, drvdata); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drvdata->base = devm_request_and_ioremap(&pdev->dev, res); + if (drvdata->base == NULL) { ret = -EBUSY; - goto err_release_region; + goto err_out; } - jz4740_wdt.rtc_clk = clk_get(NULL, "rtc"); - if (IS_ERR(jz4740_wdt.rtc_clk)) { - dev_err(dev, "cannot find RTC clock\n"); - ret = PTR_ERR(jz4740_wdt.rtc_clk); - goto err_iounmap; + drvdata->rtc_clk = clk_get(NULL, "rtc"); + if (IS_ERR(drvdata->rtc_clk)) { + dev_err(&pdev->dev, "cannot find RTC clock\n"); + ret = PTR_ERR(drvdata->rtc_clk); + goto err_out; } - ret = misc_register(&jz4740_wdt_miscdev); - if (ret < 0) { - dev_err(dev, "cannot register misc device\n"); + ret = watchdog_register_device(&drvdata->wdt); + if (ret < 0) goto err_disable_clk; - } + platform_set_drvdata(pdev, drvdata); return 0; err_disable_clk: - clk_put(jz4740_wdt.rtc_clk); -err_iounmap: - iounmap(jz4740_wdt.base); -err_release_region: - release_mem_region(jz4740_wdt.mem->start, - resource_size(jz4740_wdt.mem)); + clk_put(drvdata->rtc_clk); +err_out: return ret; } - static int __devexit jz4740_wdt_remove(struct platform_device *pdev) { - jz4740_wdt_disable(); - misc_deregister(&jz4740_wdt_miscdev); - clk_put(jz4740_wdt.rtc_clk); + struct jz4740_wdt_drvdata *drvdata = platform_get_drvdata(pdev); - iounmap(jz4740_wdt.base); - jz4740_wdt.base = NULL; - - release_mem_region(jz4740_wdt.mem->start, - resource_size(jz4740_wdt.mem)); - jz4740_wdt.mem = NULL; + jz4740_wdt_stop(&drvdata->wdt); + watchdog_unregister_device(&drvdata->wdt); + clk_put(drvdata->rtc_clk); return 0; } - static struct platform_driver jz4740_wdt_driver = { .probe = jz4740_wdt_probe, .remove = __devexit_p(jz4740_wdt_remove), @@ -299,13 +221,6 @@ module_platform_driver(jz4740_wdt_driver); MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); MODULE_DESCRIPTION("jz4740 Watchdog Driver"); - -module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, - "Watchdog heartbeat period in seconds from 1 to " - __MODULE_STRING(MAX_HEARTBEAT) ", default " - __MODULE_STRING(DEFAULT_HEARTBEAT)); - MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); MODULE_ALIAS("platform:jz4740-wdt"); diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index 51757a5..59e75d9 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/bitops.h> #include <linux/errno.h> #include <linux/fs.h> @@ -28,14 +30,14 @@ #define WDT_MAX_TIME 171 /* seconds */ static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #endif @@ -233,8 +235,8 @@ static int __devinit ks8695wdt_probe(struct platform_device *pdev) if (res) return res; - printk(KERN_INFO "KS8695 Watchdog Timer enabled (%d seconds%s)\n", - wdt_time, nowayout ? ", nowayout" : ""); + pr_info("KS8695 Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); return 0; } diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c index d3a63be..a9593a3 100644 --- a/drivers/watchdog/lantiq_wdt.c +++ b/drivers/watchdog/lantiq_wdt.c @@ -7,6 +7,8 @@ * Based on EP93xx wdt driver */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/fs.h> #include <linux/miscdevice.h> @@ -38,7 +40,7 @@ #define LTQ_WDT_DIVIDER 0x40000 #define LTQ_MAX_TIMEOUT ((1 << 16) - 1) /* the reload field is 16 bit */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static void __iomem *ltq_wdt_membase; static unsigned long ltq_io_region_clk_rate; @@ -160,7 +162,7 @@ ltq_wdt_release(struct inode *inode, struct file *file) if (ltq_wdt_ok_to_close) ltq_wdt_disable(); else - pr_err("ltq_wdt: watchdog closed without warning\n"); + pr_err("watchdog closed without warning\n"); ltq_wdt_ok_to_close = 0; clear_bit(0, <q_wdt_in_use); @@ -249,7 +251,7 @@ exit_ltq_wdt(void) module_init(init_ltq_wdt); module_exit(exit_ltq_wdt); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); diff --git a/drivers/watchdog/m54xx_wdt.c b/drivers/watchdog/m54xx_wdt.c index 4d43286..663cad8 100644 --- a/drivers/watchdog/m54xx_wdt.c +++ b/drivers/watchdog/m54xx_wdt.c @@ -16,6 +16,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -32,7 +34,7 @@ #include <asm/m54xxsim.h> #include <asm/m54xxgpt.h> -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int heartbeat = 30; /* (secs) Default is 0.5 minute */ static unsigned long wdt_status; @@ -166,8 +168,7 @@ static int m54xx_wdt_release(struct inode *inode, struct file *file) if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_disable(); else { - printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " - "timer will not stop\n"); + pr_crit("Device closed unexpectedly - timer will not stop\n"); wdt_keepalive(); } clear_bit(WDT_IN_USE, &wdt_status); @@ -196,11 +197,10 @@ static int __init m54xx_wdt_init(void) { if (!request_mem_region(MCF_MBAR + MCF_GPT_GCIR0, 4, "Coldfire M54xx Watchdog")) { - printk(KERN_WARNING - "Coldfire M54xx Watchdog : I/O region busy\n"); + pr_warn("I/O region busy\n"); return -EBUSY; } - printk(KERN_INFO "ColdFire watchdog driver is loaded.\n"); + pr_info("driver is loaded\n"); return misc_register(&m54xx_wdt_miscdev); } @@ -220,7 +220,7 @@ MODULE_DESCRIPTION("Coldfire M54xx Watchdog"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 30s)"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index 1332b83..bf84f78 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -28,6 +28,8 @@ * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -43,7 +45,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> /* ports */ #define ZF_IOBASE 0x218 @@ -93,8 +94,8 @@ MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -141,10 +142,10 @@ static unsigned long next_heartbeat; #define ZF_CTIMEOUT 0xffff #ifndef ZF_DEBUG -# define dprintk(format, args...) +#define dprintk(format, args...) #else -# define dprintk(format, args...) printk(KERN_DEBUG PFX \ - ":%s:%d: " format, __func__, __LINE__ , ## args) +#define dprintk(format, args...) \ + pr_debug(":%s:%d: " format, __func__, __LINE__ , ## args) #endif @@ -203,7 +204,7 @@ static void zf_timer_off(void) zf_set_control(ctrl_reg); spin_unlock_irqrestore(&zf_port_lock, flags); - printk(KERN_INFO PFX ": Watchdog timer is now disabled\n"); + pr_info("Watchdog timer is now disabled\n"); } @@ -233,7 +234,7 @@ static void zf_timer_on(void) zf_set_control(ctrl_reg); spin_unlock_irqrestore(&zf_port_lock, flags); - printk(KERN_INFO PFX ": Watchdog timer is now enabled\n"); + pr_info("Watchdog timer is now enabled\n"); } @@ -263,7 +264,7 @@ static void zf_ping(unsigned long data) mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); } else - printk(KERN_CRIT PFX ": I will reset your machine\n"); + pr_crit("I will reset your machine\n"); } static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, @@ -342,8 +343,7 @@ static int zf_close(struct inode *inode, struct file *file) zf_timer_off(); else { del_timer(&zf_timer); - printk(KERN_ERR PFX ": device file closed unexpectedly. " - "Will not stop the WDT!\n"); + pr_err("device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &zf_is_open); zf_expect_close = 0; @@ -390,19 +390,18 @@ static void __init zf_show_action(int act) { static const char * const str[] = { "RESET", "SMI", "NMI", "SCI" }; - printk(KERN_INFO PFX ": Watchdog using action = %s\n", str[act]); + pr_info("Watchdog using action = %s\n", str[act]); } static int __init zf_init(void) { int ret; - printk(KERN_INFO PFX - ": MachZ ZF-Logic Watchdog driver initializing.\n"); + pr_info("MachZ ZF-Logic Watchdog driver initializing\n"); ret = zf_get_ZFL_version(); if (!ret || ret == 0xffff) { - printk(KERN_WARNING PFX ": no ZF-Logic found\n"); + pr_warn("no ZF-Logic found\n"); return -ENODEV; } @@ -414,23 +413,20 @@ static int __init zf_init(void) zf_show_action(action); if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) { - printk(KERN_ERR "cannot reserve I/O ports at %d\n", - ZF_IOBASE); + pr_err("cannot reserve I/O ports at %d\n", ZF_IOBASE); ret = -EBUSY; goto no_region; } ret = register_reboot_notifier(&zf_notifier); if (ret) { - printk(KERN_ERR "can't register reboot notifier (err=%d)\n", - ret); + pr_err("can't register reboot notifier (err=%d)\n", ret); goto no_reboot; } ret = misc_register(&zf_miscdev); if (ret) { - printk(KERN_ERR "can't misc_register on minor=%d\n", - WATCHDOG_MINOR); + pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR); goto no_misc; } diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c index af63ecf..8f4a74e 100644 --- a/drivers/watchdog/max63xx_wdt.c +++ b/drivers/watchdog/max63xx_wdt.c @@ -18,23 +18,20 @@ #include <linux/moduleparam.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/fs.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/init.h> #include <linux/bitops.h> #include <linux/platform_device.h> #include <linux/spinlock.h> -#include <linux/uaccess.h> #include <linux/io.h> -#include <linux/device.h> #include <linux/slab.h> #define DEFAULT_HEARTBEAT 60 #define MAX_HEARTBEAT 60 -static int heartbeat = DEFAULT_HEARTBEAT; -static int nowayout = WATCHDOG_NOWAYOUT; +static unsigned int heartbeat = DEFAULT_HEARTBEAT; +static bool nowayout = WATCHDOG_NOWAYOUT; /* * Memory mapping: a single byte, 3 first lower bits to select bit 3 @@ -45,15 +42,8 @@ static int nowayout = WATCHDOG_NOWAYOUT; static DEFINE_SPINLOCK(io_lock); -static unsigned long wdt_status; -#define WDT_IN_USE 0 -#define WDT_RUNNING 1 -#define WDT_OK_TO_CLOSE 2 - static int nodelay; -static struct resource *wdt_mem; static void __iomem *wdt_base; -static struct platform_device *max63xx_pdev; /* * The timeout values used are actually the absolute minimum the chip @@ -117,7 +107,7 @@ max63xx_select_timeout(struct max63xx_timeout *table, int value) return NULL; } -static void max63xx_wdt_ping(void) +static int max63xx_wdt_ping(struct watchdog_device *wdd) { u8 val; @@ -129,15 +119,14 @@ static void max63xx_wdt_ping(void) __raw_writeb(val & ~MAX6369_WDI, wdt_base); spin_unlock(&io_lock); + return 0; } -static void max63xx_wdt_enable(struct max63xx_timeout *entry) +static int max63xx_wdt_start(struct watchdog_device *wdd) { + struct max63xx_timeout *entry = watchdog_get_drvdata(wdd); u8 val; - if (test_and_set_bit(WDT_RUNNING, &wdt_status)) - return; - spin_lock(&io_lock); val = __raw_readb(wdt_base); @@ -149,10 +138,11 @@ static void max63xx_wdt_enable(struct max63xx_timeout *entry) /* check for a edge triggered startup */ if (entry->tdelay == 0) - max63xx_wdt_ping(); + max63xx_wdt_ping(wdd); + return 0; } -static void max63xx_wdt_disable(void) +static int max63xx_wdt_stop(struct watchdog_device *wdd) { u8 val; @@ -164,113 +154,29 @@ static void max63xx_wdt_disable(void) __raw_writeb(val, wdt_base); spin_unlock(&io_lock); - - clear_bit(WDT_RUNNING, &wdt_status); -} - -static int max63xx_wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(WDT_IN_USE, &wdt_status)) - return -EBUSY; - - max63xx_wdt_enable(current_timeout); - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - - return nonseekable_open(inode, file); -} - -static ssize_t max63xx_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) -{ - if (len) { - if (!nowayout) { - size_t i; - - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - for (i = 0; i != len; i++) { - char c; - - if (get_user(c, data + i)) - return -EFAULT; - - if (c == 'V') - set_bit(WDT_OK_TO_CLOSE, &wdt_status); - } - } - - max63xx_wdt_ping(); - } - - return len; + return 0; } -static const struct watchdog_info ident = { - .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, +static const struct watchdog_info max63xx_wdt_info = { + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .identity = "max63xx Watchdog", }; -static long max63xx_wdt_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - int ret = -ENOTTY; - - switch (cmd) { - case WDIOC_GETSUPPORT: - ret = copy_to_user((struct watchdog_info *)arg, &ident, - sizeof(ident)) ? -EFAULT : 0; - break; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - ret = put_user(0, (int *)arg); - break; - - case WDIOC_KEEPALIVE: - max63xx_wdt_ping(); - ret = 0; - break; - - case WDIOC_GETTIMEOUT: - ret = put_user(heartbeat, (int *)arg); - break; - } - return ret; -} - -static int max63xx_wdt_release(struct inode *inode, struct file *file) -{ - if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) - max63xx_wdt_disable(); - else - dev_crit(&max63xx_pdev->dev, - "device closed unexpectedly - timer will not stop\n"); - - clear_bit(WDT_IN_USE, &wdt_status); - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - - return 0; -} - -static const struct file_operations max63xx_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = max63xx_wdt_write, - .unlocked_ioctl = max63xx_wdt_ioctl, - .open = max63xx_wdt_open, - .release = max63xx_wdt_release, +static const struct watchdog_ops max63xx_wdt_ops = { + .owner = THIS_MODULE, + .start = max63xx_wdt_start, + .stop = max63xx_wdt_stop, + .ping = max63xx_wdt_ping, }; -static struct miscdevice max63xx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &max63xx_wdt_fops, +static struct watchdog_device max63xx_wdt_dev = { + .info = &max63xx_wdt_info, + .ops = &max63xx_wdt_ops, }; static int __devinit max63xx_wdt_probe(struct platform_device *pdev) { - int ret = 0; - int size; - struct device *dev = &pdev->dev; + struct resource *wdt_mem; struct max63xx_timeout *table; table = (struct max63xx_timeout *)pdev->id_entry->driver_data; @@ -278,68 +184,34 @@ static int __devinit max63xx_wdt_probe(struct platform_device *pdev) if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) heartbeat = DEFAULT_HEARTBEAT; - dev_info(dev, "requesting %ds heartbeat\n", heartbeat); + dev_info(&pdev->dev, "requesting %ds heartbeat\n", heartbeat); current_timeout = max63xx_select_timeout(table, heartbeat); if (!current_timeout) { - dev_err(dev, "unable to satisfy heartbeat request\n"); + dev_err(&pdev->dev, "unable to satisfy heartbeat request\n"); return -EINVAL; } - dev_info(dev, "using %ds heartbeat with %ds initial delay\n", + dev_info(&pdev->dev, "using %ds heartbeat with %ds initial delay\n", current_timeout->twd, current_timeout->tdelay); heartbeat = current_timeout->twd; - max63xx_pdev = pdev; - wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (wdt_mem == NULL) { - dev_err(dev, "failed to get memory region resource\n"); - return -ENOENT; - } + wdt_base = devm_request_and_ioremap(&pdev->dev, wdt_mem); + if (!wdt_base) + return -ENOMEM; - size = resource_size(wdt_mem); - if (!request_mem_region(wdt_mem->start, size, pdev->name)) { - dev_err(dev, "failed to get memory region\n"); - return -ENOENT; - } - - wdt_base = ioremap(wdt_mem->start, size); - if (!wdt_base) { - dev_err(dev, "failed to map memory region\n"); - ret = -ENOMEM; - goto out_request; - } + max63xx_wdt_dev.timeout = heartbeat; + watchdog_set_nowayout(&max63xx_wdt_dev, nowayout); + watchdog_set_drvdata(&max63xx_wdt_dev, current_timeout); - ret = misc_register(&max63xx_wdt_miscdev); - if (ret < 0) { - dev_err(dev, "cannot register misc device\n"); - goto out_unmap; - } - - return 0; - -out_unmap: - iounmap(wdt_base); -out_request: - release_mem_region(wdt_mem->start, size); - wdt_mem = NULL; - - return ret; + return watchdog_register_device(&max63xx_wdt_dev); } static int __devexit max63xx_wdt_remove(struct platform_device *pdev) { - misc_deregister(&max63xx_wdt_miscdev); - if (wdt_mem) { - release_mem_region(wdt_mem->start, resource_size(wdt_mem)); - wdt_mem = NULL; - } - - if (wdt_base) - iounmap(wdt_base); - + watchdog_unregister_device(&max63xx_wdt_dev); return 0; } @@ -375,7 +247,7 @@ MODULE_PARM_DESC(heartbeat, __MODULE_STRING(MAX_HEARTBEAT) ", default " __MODULE_STRING(DEFAULT_HEARTBEAT)); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c index bc820d1..37e4b52 100644 --- a/drivers/watchdog/mixcomwd.c +++ b/drivers/watchdog/mixcomwd.c @@ -39,9 +39,10 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define VERSION "0.6" #define WATCHDOG_NAME "mixcomwd" -#define PFX WATCHDOG_NAME ": " #include <linux/module.h> #include <linux/moduleparam.h> @@ -107,8 +108,8 @@ static int mixcomwd_timer_alive; static DEFINE_TIMER(mixcomwd_timer, mixcomwd_timerfun, 0, 0); static char expect_close; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -156,15 +157,13 @@ static int mixcomwd_release(struct inode *inode, struct file *file) { if (expect_close == 42) { if (mixcomwd_timer_alive) { - printk(KERN_ERR PFX - "release called while internal timer alive"); + pr_err("release called while internal timer alive\n"); return -EBUSY; } mixcomwd_timer_alive = 1; mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); } else - printk(KERN_CRIT PFX - "WDT device closed unexpectedly. WDT will not stop!\n"); + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); clear_bit(0, &mixcomwd_opened); expect_close = 0; @@ -274,22 +273,19 @@ static int __init mixcomwd_init(void) } if (!found) { - printk(KERN_ERR PFX - "No card detected, or port not available.\n"); + pr_err("No card detected, or port not available\n"); return -ENODEV; } ret = misc_register(&mixcomwd_miscdev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error_misc_register_watchdog; } - printk(KERN_INFO - "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n", - VERSION, watchdog_port); + pr_info("MixCOM watchdog driver v%s, watchdog port at 0x%3x\n", + VERSION, watchdog_port); return 0; @@ -303,8 +299,7 @@ static void __exit mixcomwd_exit(void) { if (!nowayout) { if (mixcomwd_timer_alive) { - printk(KERN_WARNING PFX "I quit now, hardware will" - " probably reboot!\n"); + pr_warn("I quit now, hardware will probably reboot!\n"); del_timer_sync(&mixcomwd_timer); mixcomwd_timer_alive = 0; } diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index 20feb4d..40f7bf1 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -17,6 +17,8 @@ * option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/fs.h> #include <linux/init.h> #include <linux/kernel.h> @@ -60,8 +62,8 @@ module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -96,7 +98,7 @@ static void mpc8xxx_wdt_timer_ping(unsigned long arg) static void mpc8xxx_wdt_pr_warn(const char *msg) { - pr_crit("mpc8xxx_wdt: %s, expect the %s soon!\n", msg, + pr_crit("%s, expect the %s soon!\n", msg, reset ? "reset" : "machine check exception"); } @@ -209,7 +211,7 @@ static int __devinit mpc8xxx_wdt_probe(struct platform_device *ofdev) enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN; if (!enabled && wdt_type->hw_enabled) { - pr_info("mpc8xxx_wdt: could not be enabled in software\n"); + pr_info("could not be enabled in software\n"); ret = -ENOSYS; goto err_unmap; } @@ -226,9 +228,8 @@ static int __devinit mpc8xxx_wdt_probe(struct platform_device *ofdev) goto err_unmap; #endif - pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d " - "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, - timeout_sec); + pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d (%d seconds)\n", + reset ? "reset" : "interrupt", timeout, timeout_sec); /* * If the watchdog was previously enabled or we're running on @@ -303,7 +304,7 @@ static int mpc8xxx_wdt_init_late(void) ret = misc_register(&mpc8xxx_wdt_miscdev); if (ret) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + WATCHDOG_MINOR, ret); return ret; } return 0; diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 82ccd36..7c741dc 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -19,6 +19,9 @@ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -44,7 +47,7 @@ struct mpcore_wdt { char expect_close; }; -static struct platform_device *mpcore_wdt_dev; +static struct platform_device *mpcore_wdt_pdev; static DEFINE_SPINLOCK(wdt_lock); #define TIMER_MARGIN 60 @@ -54,8 +57,8 @@ MODULE_PARM_DESC(mpcore_margin, "MPcore timer margin in seconds. (0 < mpcore_margin < 65536, default=" __MODULE_STRING(TIMER_MARGIN) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -148,7 +151,7 @@ static int mpcore_wdt_set_heartbeat(int t) */ static int mpcore_wdt_open(struct inode *inode, struct file *file) { - struct mpcore_wdt *wdt = platform_get_drvdata(mpcore_wdt_dev); + struct mpcore_wdt *wdt = platform_get_drvdata(mpcore_wdt_pdev); if (test_and_set_bit(0, &wdt->timer_alive)) return -EBUSY; @@ -298,9 +301,9 @@ static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd, * System shutdown handler. Turn off the watchdog if we're * restarting or halting the system. */ -static void mpcore_wdt_shutdown(struct platform_device *dev) +static void mpcore_wdt_shutdown(struct platform_device *pdev) { - struct mpcore_wdt *wdt = platform_get_drvdata(dev); + struct mpcore_wdt *wdt = platform_get_drvdata(pdev); if (system_state == SYSTEM_RESTART || system_state == SYSTEM_HALT) mpcore_wdt_stop(wdt); @@ -324,99 +327,79 @@ static struct miscdevice mpcore_wdt_miscdev = { .fops = &mpcore_wdt_fops, }; -static int __devinit mpcore_wdt_probe(struct platform_device *dev) +static int __devinit mpcore_wdt_probe(struct platform_device *pdev) { struct mpcore_wdt *wdt; struct resource *res; int ret; /* We only accept one device, and it must have an id of -1 */ - if (dev->id != -1) + if (pdev->id != -1) return -ENODEV; - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto err_out; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; - wdt = kzalloc(sizeof(struct mpcore_wdt), GFP_KERNEL); - if (!wdt) { - ret = -ENOMEM; - goto err_out; + wdt = devm_kzalloc(&pdev->dev, sizeof(struct mpcore_wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->dev = &pdev->dev; + wdt->irq = platform_get_irq(pdev, 0); + if (wdt->irq >= 0) { + ret = devm_request_irq(wdt->dev, wdt->irq, mpcore_wdt_fire, 0, + "mpcore_wdt", wdt); + if (ret) { + dev_printk(KERN_ERR, wdt->dev, + "cannot register IRQ%d for watchdog\n", + wdt->irq); + return ret; + } } - wdt->dev = &dev->dev; - wdt->irq = platform_get_irq(dev, 0); - if (wdt->irq < 0) { - ret = -ENXIO; - goto err_free; - } - wdt->base = ioremap(res->start, resource_size(res)); - if (!wdt->base) { - ret = -ENOMEM; - goto err_free; - } + wdt->base = devm_ioremap(wdt->dev, res->start, resource_size(res)); + if (!wdt->base) + return -ENOMEM; - mpcore_wdt_miscdev.parent = &dev->dev; + mpcore_wdt_miscdev.parent = &pdev->dev; ret = misc_register(&mpcore_wdt_miscdev); if (ret) { dev_printk(KERN_ERR, wdt->dev, "cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); - goto err_misc; - } - - ret = request_irq(wdt->irq, mpcore_wdt_fire, 0, "mpcore_wdt", wdt); - if (ret) { - dev_printk(KERN_ERR, wdt->dev, - "cannot register IRQ%d for watchdog\n", wdt->irq); - goto err_irq; + return ret; } mpcore_wdt_stop(wdt); - platform_set_drvdata(dev, wdt); - mpcore_wdt_dev = dev; + platform_set_drvdata(pdev, wdt); + mpcore_wdt_pdev = pdev; return 0; - -err_irq: - misc_deregister(&mpcore_wdt_miscdev); -err_misc: - iounmap(wdt->base); -err_free: - kfree(wdt); -err_out: - return ret; } -static int __devexit mpcore_wdt_remove(struct platform_device *dev) +static int __devexit mpcore_wdt_remove(struct platform_device *pdev) { - struct mpcore_wdt *wdt = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); + platform_set_drvdata(pdev, NULL); misc_deregister(&mpcore_wdt_miscdev); - mpcore_wdt_dev = NULL; + mpcore_wdt_pdev = NULL; - free_irq(wdt->irq, wdt); - iounmap(wdt->base); - kfree(wdt); return 0; } #ifdef CONFIG_PM -static int mpcore_wdt_suspend(struct platform_device *dev, pm_message_t msg) +static int mpcore_wdt_suspend(struct platform_device *pdev, pm_message_t msg) { - struct mpcore_wdt *wdt = platform_get_drvdata(dev); + struct mpcore_wdt *wdt = platform_get_drvdata(pdev); mpcore_wdt_stop(wdt); /* Turn the WDT off */ return 0; } -static int mpcore_wdt_resume(struct platform_device *dev) +static int mpcore_wdt_resume(struct platform_device *pdev) { - struct mpcore_wdt *wdt = platform_get_drvdata(dev); + struct mpcore_wdt *wdt = platform_get_drvdata(pdev); /* re-activate timer */ if (test_bit(0, &wdt->timer_alive)) mpcore_wdt_start(wdt); @@ -442,9 +425,6 @@ static struct platform_driver mpcore_wdt_driver = { }, }; -static char banner[] __initdata = KERN_INFO "MPcore Watchdog Timer: 0.1. " - "mpcore_noboot=%d mpcore_margin=%d sec (nowayout= %d)\n"; - static int __init mpcore_wdt_init(void) { /* @@ -453,11 +433,12 @@ static int __init mpcore_wdt_init(void) */ if (mpcore_wdt_set_heartbeat(mpcore_margin)) { mpcore_wdt_set_heartbeat(TIMER_MARGIN); - printk(KERN_INFO "mpcore_margin value must be 0 < mpcore_margin < 65536, using %d\n", + pr_info("mpcore_margin value must be 0 < mpcore_margin < 65536, using %d\n", TIMER_MARGIN); } - printk(banner, mpcore_noboot, mpcore_margin, nowayout); + pr_info("MPcore Watchdog Timer: 0.1. mpcore_noboot=%d mpcore_margin=%d sec (nowayout= %d)\n", + mpcore_noboot, mpcore_margin, nowayout); return platform_driver_register(&mpcore_wdt_driver); } diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c index 97f8a48..c53d025 100644 --- a/drivers/watchdog/mv64x60_wdt.c +++ b/drivers/watchdog/mv64x60_wdt.c @@ -15,6 +15,8 @@ * or implied. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/fs.h> #include <linux/init.h> #include <linux/kernel.h> @@ -58,8 +60,8 @@ static unsigned int bus_clk; static char expect_close; static DEFINE_SPINLOCK(mv64x60_wdt_spinlock); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -100,7 +102,7 @@ static void mv64x60_wdt_handler_enable(void) if (mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_FALSE, MV64x60_WDC_ENABLE_SHIFT)) { mv64x60_wdt_service(); - printk(KERN_NOTICE "mv64x60_wdt: watchdog activated\n"); + pr_notice("watchdog activated\n"); } } @@ -108,7 +110,7 @@ static void mv64x60_wdt_handler_disable(void) { if (mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_TRUE, MV64x60_WDC_ENABLE_SHIFT)) - printk(KERN_NOTICE "mv64x60_wdt: watchdog deactivated\n"); + pr_notice("watchdog deactivated\n"); } static void mv64x60_wdt_set_timeout(unsigned int timeout) @@ -139,8 +141,7 @@ static int mv64x60_wdt_release(struct inode *inode, struct file *file) if (expect_close == 42) mv64x60_wdt_handler_disable(); else { - printk(KERN_CRIT - "mv64x60_wdt: unexpected close, not stopping timer!\n"); + pr_crit("unexpected close, not stopping timer!\n"); mv64x60_wdt_service(); } expect_close = 0; @@ -308,7 +309,7 @@ static struct platform_driver mv64x60_wdt_driver = { static int __init mv64x60_wdt_init(void) { - printk(KERN_INFO "MV64x60 watchdog driver\n"); + pr_info("MV64x60 watchdog driver\n"); return platform_driver_register(&mv64x60_wdt_driver); } diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c index 529085b..ea4c744 100644 --- a/drivers/watchdog/nuc900_wdt.c +++ b/drivers/watchdog/nuc900_wdt.c @@ -55,8 +55,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/nv_tco.c b/drivers/watchdog/nv_tco.c index 809f41c..6bbb9ef 100644 --- a/drivers/watchdog/nv_tco.c +++ b/drivers/watchdog/nv_tco.c @@ -21,6 +21,8 @@ * Includes, defines, variables, module parameters, ... */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -41,7 +43,6 @@ #define TCO_VERSION "0.01" #define TCO_MODULE_NAME "NV_TCO" #define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION -#define PFX TCO_MODULE_NAME ": " /* internal variables */ static unsigned int tcobase; @@ -60,8 +61,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39, " "default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started" " (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -169,8 +170,7 @@ static int nv_tco_release(struct inode *inode, struct file *file) if (tco_expect_close == 42) { tco_timer_stop(); } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping " - "watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); tco_timer_keepalive(); } clear_bit(0, &timer_alive); @@ -323,15 +323,14 @@ static unsigned char __devinit nv_tco_getdevice(void) val &= 0xffff; if (val == 0x0001 || val == 0x0000) { /* Something is wrong here, bar isn't setup */ - printk(KERN_ERR PFX "failed to get tcobase address\n"); + pr_err("failed to get tcobase address\n"); return 0; } val &= 0xff00; tcobase = val + 0x40; if (!request_region(tcobase, 0x10, "NV TCO")) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - tcobase); + pr_err("I/O address 0x%04x already in use\n", tcobase); return 0; } @@ -347,7 +346,7 @@ static unsigned char __devinit nv_tco_getdevice(void) /* Disable SMI caused by TCO */ if (!request_region(MCP51_SMI_EN(tcobase), 4, "NV TCO")) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", + pr_err("I/O address 0x%04x already in use\n", MCP51_SMI_EN(tcobase)); goto out; } @@ -357,7 +356,7 @@ static unsigned char __devinit nv_tco_getdevice(void) val = inl(MCP51_SMI_EN(tcobase)); release_region(MCP51_SMI_EN(tcobase), 4); if (val & MCP51_SMI_EN_TCO) { - printk(KERN_ERR PFX "Could not disable SMI caused by TCO\n"); + pr_err("Could not disable SMI caused by TCO\n"); goto out; } @@ -367,8 +366,7 @@ static unsigned char __devinit nv_tco_getdevice(void) pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val); pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val); if (!(val & MCP51_SMBUS_SETUP_B_TCO_REBOOT)) { - printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot " - "disabled by hardware\n"); + pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); goto out; } @@ -387,8 +385,8 @@ static int __devinit nv_tco_init(struct platform_device *dev) return -ENODEV; /* Check to see if last reboot was due to watchdog timeout */ - printk(KERN_INFO PFX "Watchdog reboot %sdetected.\n", - inl(TCO_STS(tcobase)) & TCO_STS_TCO2TO_STS ? "" : "not "); + pr_info("Watchdog reboot %sdetected\n", + inl(TCO_STS(tcobase)) & TCO_STS_TCO2TO_STS ? "" : "not "); /* Clear out the old status */ outl(TCO_STS_RESET, TCO_STS(tcobase)); @@ -400,14 +398,14 @@ static int __devinit nv_tco_init(struct platform_device *dev) if (tco_timer_set_heartbeat(heartbeat)) { heartbeat = WATCHDOG_HEARTBEAT; tco_timer_set_heartbeat(heartbeat); - printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39, " - "using %d\n", heartbeat); + pr_info("heartbeat value must be 2<heartbeat<39, using %d\n", + heartbeat); } ret = misc_register(&nv_tco_miscdev); if (ret != 0) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d " - "(err=%d)\n", WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_region; } @@ -415,8 +413,8 @@ static int __devinit nv_tco_init(struct platform_device *dev) tco_timer_stop(); - printk(KERN_INFO PFX "initialized (0x%04x). heartbeat=%d sec " - "(nowayout=%d)\n", tcobase, heartbeat, nowayout); + pr_info("initialized (0x%04x). heartbeat=%d sec (nowayout=%d)\n", + tcobase, heartbeat, nowayout); return 0; @@ -439,8 +437,7 @@ static void __devexit nv_tco_cleanup(void) pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val); pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val); if (val & MCP51_SMBUS_SETUP_B_TCO_REBOOT) { - printk(KERN_CRIT PFX "Couldn't unset REBOOT bit. Machine may " - "soon reset\n"); + pr_crit("Couldn't unset REBOOT bit. Machine may soon reset\n"); } /* Deregister */ @@ -483,8 +480,7 @@ static int __init nv_tco_init_module(void) { int err; - printk(KERN_INFO PFX "NV TCO WatchDog Timer Driver v%s\n", - TCO_VERSION); + pr_info("NV TCO WatchDog Timer Driver v%s\n", TCO_VERSION); err = platform_driver_register(&nv_tco_driver); if (err) @@ -508,7 +504,7 @@ static void __exit nv_tco_cleanup_module(void) { platform_device_unregister(nv_tco_platform_device); platform_driver_unregister(&nv_tco_driver); - printk(KERN_INFO PFX "NV TCO Watchdog Module Unloaded.\n"); + pr_info("NV TCO Watchdog Module Unloaded\n"); } module_init(nv_tco_init_module); diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c index 7c0d863..4612088 100644 --- a/drivers/watchdog/octeon-wdt-main.c +++ b/drivers/watchdog/octeon-wdt-main.c @@ -52,6 +52,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/miscdevice.h> #include <linux/interrupt.h> #include <linux/watchdog.h> @@ -95,8 +97,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 < heartbeat, default=" __MODULE_STRING(WD_TIMO) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, S_IRUGO); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, S_IRUGO); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -201,7 +203,7 @@ static void __init octeon_wdt_build_stage1(void) uasm_resolve_relocs(relocs, labels); len = (int)(p - nmi_stage1_insns); - pr_debug("Synthesized NMI stage 1 handler (%d instructions).\n", len); + pr_debug("Synthesized NMI stage 1 handler (%d instructions)\n", len); pr_debug("\t.set push\n"); pr_debug("\t.set noreorder\n"); @@ -627,7 +629,7 @@ static int octeon_wdt_release(struct inode *inode, struct file *file) do_coundown = 0; octeon_wdt_ping(); } else { - pr_crit("octeon_wdt: WDT device closed unexpectedly. WDT will not stop!\n"); + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); } clear_bit(0, &octeon_wdt_is_open); expect_close = 0; @@ -684,12 +686,12 @@ static int __init octeon_wdt_init(void) octeon_wdt_calc_parameters(heartbeat); - pr_info("octeon_wdt: Initial granularity %d Sec.\n", timeout_sec); + pr_info("Initial granularity %d Sec\n", timeout_sec); ret = misc_register(&octeon_wdt_miscdev); if (ret) { - pr_err("octeon_wdt: cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto out; } diff --git a/drivers/watchdog/of_xilinx_wdt.c b/drivers/watchdog/of_xilinx_wdt.c index f359ab8..55d2f66 100644 --- a/drivers/watchdog/of_xilinx_wdt.c +++ b/drivers/watchdog/of_xilinx_wdt.c @@ -19,6 +19,8 @@ * know the wdt reset interval */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> @@ -99,7 +101,7 @@ static void xwdt_stop(void) iowrite32(0, xdev.base + XWT_TWCSR1_OFFSET); spin_unlock(&spinlock); - printk(KERN_INFO PFX "Stopped!\n"); + pr_info("Stopped!\n"); } static void xwdt_keepalive(void) @@ -165,7 +167,7 @@ static int xwdt_open(struct inode *inode, struct file *file) __module_get(THIS_MODULE); xwdt_start(); - printk(KERN_INFO PFX "Started...\n"); + pr_info("Started...\n"); return nonseekable_open(inode, file); } @@ -175,8 +177,7 @@ static int xwdt_release(struct inode *inode, struct file *file) if (expect_close == 42) { xwdt_stop(); } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); xwdt_keepalive(); } @@ -300,22 +301,20 @@ static int __devinit xwdt_probe(struct platform_device *pdev) "clock-frequency", NULL); if (pfreq == NULL) { - printk(KERN_WARNING PFX - "The watchdog clock frequency cannot be obtained!\n"); + pr_warn("The watchdog clock frequency cannot be obtained!\n"); no_timeout = 1; } rc = of_address_to_resource(pdev->dev.of_node, 0, &xdev.res); if (rc) { - printk(KERN_WARNING PFX "invalid address!\n"); + pr_warn("invalid address!\n"); return rc; } tmptr = (u32 *)of_get_property(pdev->dev.of_node, "xlnx,wdt-interval", NULL); if (tmptr == NULL) { - printk(KERN_WARNING PFX "Parameter \"xlnx,wdt-interval\"" - " not found in device tree!\n"); + pr_warn("Parameter \"xlnx,wdt-interval\" not found in device tree!\n"); no_timeout = 1; } else { xdev.wdt_interval = *tmptr; @@ -324,8 +323,7 @@ static int __devinit xwdt_probe(struct platform_device *pdev) tmptr = (u32 *)of_get_property(pdev->dev.of_node, "xlnx,wdt-enable-once", NULL); if (tmptr == NULL) { - printk(KERN_WARNING PFX "Parameter \"xlnx,wdt-enable-once\"" - " not found in device tree!\n"); + pr_warn("Parameter \"xlnx,wdt-enable-once\" not found in device tree!\n"); xdev.nowayout = WATCHDOG_NOWAYOUT; } @@ -339,20 +337,20 @@ static int __devinit xwdt_probe(struct platform_device *pdev) if (!request_mem_region(xdev.res.start, xdev.res.end - xdev.res.start + 1, WATCHDOG_NAME)) { rc = -ENXIO; - printk(KERN_ERR PFX "memory request failure!\n"); + pr_err("memory request failure!\n"); goto err_out; } xdev.base = ioremap(xdev.res.start, xdev.res.end - xdev.res.start + 1); if (xdev.base == NULL) { rc = -ENOMEM; - printk(KERN_ERR PFX "ioremap failure!\n"); + pr_err("ioremap failure!\n"); goto release_mem; } rc = xwdt_selftest(); if (rc == XWT_TIMER_FAILED) { - printk(KERN_ERR PFX "SelfTest routine error!\n"); + pr_err("SelfTest routine error!\n"); goto unmap_io; } @@ -360,20 +358,17 @@ static int __devinit xwdt_probe(struct platform_device *pdev) rc = misc_register(&xwdt_miscdev); if (rc) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - xwdt_miscdev.minor, rc); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + xwdt_miscdev.minor, rc); goto unmap_io; } if (no_timeout) - printk(KERN_INFO PFX - "driver loaded (timeout=? sec, nowayout=%d)\n", - xdev.nowayout); + pr_info("driver loaded (timeout=? sec, nowayout=%d)\n", + xdev.nowayout); else - printk(KERN_INFO PFX - "driver loaded (timeout=%d sec, nowayout=%d)\n", - timeout, xdev.nowayout); + pr_info("driver loaded (timeout=%d sec, nowayout=%d)\n", + timeout, xdev.nowayout); expect_close = 0; clear_bit(0, &driver_open); diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index d19ff51..8285d65 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -26,6 +26,8 @@ * Use the driver model and standard identifiers; handle bigger timeouts. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> @@ -183,7 +185,7 @@ static int omap_wdt_release(struct inode *inode, struct file *file) pm_runtime_put_sync(wdev->dev); #else - printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n"); + pr_crit("Unexpected close, not stopping!\n"); #endif wdev->omap_wdt_users = 0; diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c index 4ad78f8..788aa15 100644 --- a/drivers/watchdog/orion_wdt.c +++ b/drivers/watchdog/orion_wdt.c @@ -10,6 +10,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -28,18 +30,19 @@ /* * Watchdog timer block registers. */ -#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000) +#define TIMER_CTRL 0x0000 #define WDT_EN 0x0010 -#define WDT_VAL (TIMER_VIRT_BASE + 0x0024) +#define WDT_VAL 0x0024 #define WDT_MAX_CYCLE_COUNT 0xffffffff #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = -1; /* module parameter (seconds) */ static unsigned int wdt_max_duration; /* (seconds) */ static unsigned int wdt_tclk; +static void __iomem *wdt_reg; static unsigned long wdt_status; static DEFINE_SPINLOCK(wdt_lock); @@ -48,7 +51,7 @@ static void orion_wdt_ping(void) spin_lock(&wdt_lock); /* Reload watchdog duration */ - writel(wdt_tclk * heartbeat, WDT_VAL); + writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL); spin_unlock(&wdt_lock); } @@ -60,7 +63,7 @@ static void orion_wdt_enable(void) spin_lock(&wdt_lock); /* Set watchdog duration */ - writel(wdt_tclk * heartbeat, WDT_VAL); + writel(wdt_tclk * heartbeat, wdt_reg + WDT_VAL); /* Clear watchdog timer interrupt */ reg = readl(BRIDGE_CAUSE); @@ -68,9 +71,9 @@ static void orion_wdt_enable(void) writel(reg, BRIDGE_CAUSE); /* Enable watchdog timer */ - reg = readl(TIMER_CTRL); + reg = readl(wdt_reg + TIMER_CTRL); reg |= WDT_EN; - writel(reg, TIMER_CTRL); + writel(reg, wdt_reg + TIMER_CTRL); /* Enable reset on watchdog */ reg = readl(RSTOUTn_MASK); @@ -92,9 +95,9 @@ static void orion_wdt_disable(void) writel(reg, RSTOUTn_MASK); /* Disable watchdog timer */ - reg = readl(TIMER_CTRL); + reg = readl(wdt_reg + TIMER_CTRL); reg &= ~WDT_EN; - writel(reg, TIMER_CTRL); + writel(reg, wdt_reg + TIMER_CTRL); spin_unlock(&wdt_lock); } @@ -102,7 +105,7 @@ static void orion_wdt_disable(void) static int orion_wdt_get_timeleft(int *time_left) { spin_lock(&wdt_lock); - *time_left = readl(WDT_VAL) / wdt_tclk; + *time_left = readl(wdt_reg + WDT_VAL) / wdt_tclk; spin_unlock(&wdt_lock); return 0; } @@ -209,8 +212,7 @@ static int orion_wdt_release(struct inode *inode, struct file *file) if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) orion_wdt_disable(); else - printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " - "timer will not stop\n"); + pr_crit("Device closed unexpectedly - timer will not stop\n"); clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -236,15 +238,20 @@ static struct miscdevice orion_wdt_miscdev = { static int __devinit orion_wdt_probe(struct platform_device *pdev) { struct orion_wdt_platform_data *pdata = pdev->dev.platform_data; + struct resource *res; int ret; if (pdata) { wdt_tclk = pdata->tclk; } else { - printk(KERN_ERR "Orion Watchdog misses platform data\n"); + pr_err("misses platform data\n"); return -ENODEV; } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + wdt_reg = ioremap(res->start, resource_size(res)); + if (orion_wdt_miscdev.parent) return -EBUSY; orion_wdt_miscdev.parent = &pdev->dev; @@ -257,8 +264,8 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev) if (ret) return ret; - printk(KERN_INFO "Orion Watchdog Timer: Initial timeout %d sec%s\n", - heartbeat, nowayout ? ", nowayout" : ""); + pr_info("Initial timeout %d sec%s\n", + heartbeat, nowayout ? ", nowayout" : ""); return 0; } @@ -302,7 +309,7 @@ MODULE_DESCRIPTION("Orion Processor Watchdog"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index e78d899..5afb89b 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -18,6 +18,8 @@ * Release 1.1 */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/miscdevice.h> @@ -33,7 +35,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> /* #define DEBUG 1 */ @@ -42,7 +43,6 @@ #define VERSION "1.1" #define MODNAME "pc87413 WDT" -#define PFX MODNAME ": " #define DPFX MODNAME " - DEBUG: " #define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */ @@ -65,7 +65,7 @@ static char expect_close; /* is the close expected? */ static DEFINE_SPINLOCK(io_lock); /* to guard us from io races */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; /* -- Low level function ----------------------------------------*/ @@ -87,7 +87,7 @@ static inline void pc87413_select_wdt_out(void) outb_p(cr_data, WDT_DATA_IO_PORT); #ifdef DEBUG - printk(KERN_INFO DPFX + pr_info(DPFX "Select multiple pin,pin55,as WDT output: Bit7 to 1: %d\n", cr_data); #endif @@ -111,7 +111,7 @@ static inline void pc87413_enable_swc(void) outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */ #ifdef DEBUG - printk(KERN_INFO DPFX "pc87413 - Enable SWC functions\n"); + pr_info(DPFX "pc87413 - Enable SWC functions\n"); #endif } @@ -132,7 +132,7 @@ static void pc87413_get_swc_base_addr(void) swc_base_addr = (addr_h << 8) + addr_l; #ifdef DEBUG - printk(KERN_INFO DPFX + pr_info(DPFX "Read SWC I/O Base Address: low %d, high %d, res %d\n", addr_l, addr_h, swc_base_addr); #endif @@ -145,7 +145,7 @@ static inline void pc87413_swc_bank3(void) /* Step 4: Select Bank3 of SWC */ outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f); #ifdef DEBUG - printk(KERN_INFO DPFX "Select Bank3 of SWC\n"); + pr_info(DPFX "Select Bank3 of SWC\n"); #endif } @@ -156,7 +156,7 @@ static inline void pc87413_programm_wdto(char pc87413_time) /* Step 5: Programm WDTO, Twd. */ outb_p(pc87413_time, swc_base_addr + WDTO); #ifdef DEBUG - printk(KERN_INFO DPFX "Set WDTO to %d minutes\n", pc87413_time); + pr_info(DPFX "Set WDTO to %d minutes\n", pc87413_time); #endif } @@ -167,7 +167,7 @@ static inline void pc87413_enable_wden(void) /* Step 6: Enable WDEN */ outb_p(inb(swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL); #ifdef DEBUG - printk(KERN_INFO DPFX "Enable WDEN\n"); + pr_info(DPFX "Enable WDEN\n"); #endif } @@ -177,7 +177,7 @@ static inline void pc87413_enable_sw_wd_tren(void) /* Enable SW_WD_TREN */ outb_p(inb(swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG); #ifdef DEBUG - printk(KERN_INFO DPFX "Enable SW_WD_TREN\n"); + pr_info(DPFX "Enable SW_WD_TREN\n"); #endif } @@ -188,7 +188,7 @@ static inline void pc87413_disable_sw_wd_tren(void) /* Disable SW_WD_TREN */ outb_p(inb(swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG); #ifdef DEBUG - printk(KERN_INFO DPFX "pc87413 - Disable SW_WD_TREN\n"); + pr_info(DPFX "pc87413 - Disable SW_WD_TREN\n"); #endif } @@ -199,7 +199,7 @@ static inline void pc87413_enable_sw_wd_trg(void) /* Enable SW_WD_TRG */ outb_p(inb(swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL); #ifdef DEBUG - printk(KERN_INFO DPFX "pc87413 - Enable SW_WD_TRG\n"); + pr_info(DPFX "pc87413 - Enable SW_WD_TRG\n"); #endif } @@ -210,7 +210,7 @@ static inline void pc87413_disable_sw_wd_trg(void) /* Disable SW_WD_TRG */ outb_p(inb(swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL); #ifdef DEBUG - printk(KERN_INFO DPFX "Disable SW_WD_TRG\n"); + pr_info(DPFX "Disable SW_WD_TRG\n"); #endif } @@ -284,8 +284,7 @@ static int pc87413_open(struct inode *inode, struct file *file) /* Reload and activate timer */ pc87413_refresh(); - printk(KERN_INFO MODNAME - "Watchdog enabled. Timeout set to %d minute(s).\n", timeout); + pr_info("Watchdog enabled. Timeout set to %d minute(s).\n", timeout); return nonseekable_open(inode, file); } @@ -308,11 +307,9 @@ static int pc87413_release(struct inode *inode, struct file *file) if (expect_close == 42) { pc87413_disable(); - printk(KERN_INFO MODNAME - "Watchdog disabled, sleeping again...\n"); + pr_info("Watchdog disabled, sleeping again...\n"); } else { - printk(KERN_CRIT MODNAME - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); pc87413_refresh(); } clear_bit(0, &timer_enabled); @@ -428,7 +425,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, case WDIOC_KEEPALIVE: pc87413_refresh(); #ifdef DEBUG - printk(KERN_INFO DPFX "keepalive\n"); + pr_info(DPFX "keepalive\n"); #endif return 0; case WDIOC_SETTIMEOUT: @@ -508,7 +505,7 @@ static int __init pc87413_init(void) { int ret; - printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", + pr_info("Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT); if (!request_muxed_region(io, 2, MODNAME)) @@ -516,26 +513,23 @@ static int __init pc87413_init(void) ret = register_reboot_notifier(&pc87413_notifier); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); } ret = misc_register(&pc87413_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto reboot_unreg; } - printk(KERN_INFO PFX "initialized. timeout=%d min \n", timeout); + pr_info("initialized. timeout=%d min\n", timeout); pc87413_select_wdt_out(); pc87413_enable_swc(); pc87413_get_swc_base_addr(); if (!request_region(swc_base_addr, 0x20, MODNAME)) { - printk(KERN_ERR PFX - "cannot request SWC region at 0x%x\n", swc_base_addr); + pr_err("cannot request SWC region at 0x%x\n", swc_base_addr); ret = -EBUSY; goto misc_unreg; } @@ -568,14 +562,14 @@ static void __exit pc87413_exit(void) /* Stop the timer before we leave */ if (!nowayout) { pc87413_disable(); - printk(KERN_INFO MODNAME "Watchdog disabled.\n"); + pr_info("Watchdog disabled\n"); } misc_deregister(&pc87413_miscdev); unregister_reboot_notifier(&pc87413_notifier); release_region(swc_base_addr, 0x20); - printk(KERN_INFO MODNAME " watchdog component driver removed.\n"); + pr_info("watchdog component driver removed\n"); } module_init(pc87413_init); @@ -597,7 +591,7 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")."); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index 06f7922..75694cf 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -51,6 +51,8 @@ * http://www.pcwatchdog.com/ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> /* For module specific items */ #include <linux/moduleparam.h> /* For new moduleparam's */ #include <linux/types.h> /* For standard types (like size_t) */ @@ -75,7 +77,6 @@ #define WATCHDOG_DATE "18 Feb 2007" #define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog" #define WATCHDOG_NAME "pcwd" -#define PFX WATCHDOG_NAME ": " #define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n" /* @@ -203,8 +204,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. " "(2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -220,8 +221,7 @@ static int send_isa_command(int cmd) int port0, last_port0; /* Double read for stabilising */ if (debug >= DEBUG) - printk(KERN_DEBUG PFX "sending following data cmd=0x%02x\n", - cmd); + pr_debug("sending following data cmd=0x%02x\n", cmd); /* The WCMD bit must be 1 and the command is only 4 bits in size */ control_status = (cmd & 0x0F) | WD_WCMD; @@ -240,9 +240,8 @@ static int send_isa_command(int cmd) } if (debug >= DEBUG) - printk(KERN_DEBUG PFX "received following data for " - "cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n", - cmd, port0, last_port0); + pr_debug("received following data for cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n", + cmd, port0, last_port0); return port0; } @@ -271,8 +270,7 @@ static int set_command_mode(void) pcwd_private.command_mode = found; if (debug >= DEBUG) - printk(KERN_DEBUG PFX "command_mode=%d\n", - pcwd_private.command_mode); + pr_debug("command_mode=%d\n", pcwd_private.command_mode); return found; } @@ -288,8 +286,7 @@ static void unset_command_mode(void) pcwd_private.command_mode = 0; if (debug >= DEBUG) - printk(KERN_DEBUG PFX "command_mode=%d\n", - pcwd_private.command_mode); + pr_debug("command_mode=%d\n", pcwd_private.command_mode); } static inline void pcwd_check_temperature_support(void) @@ -336,17 +333,14 @@ static void pcwd_show_card_info(void) /* Get some extra info from the hardware (in command/debug/diag mode) */ if (pcwd_private.revision == PCWD_REVISION_A) - printk(KERN_INFO PFX - "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", - pcwd_private.io_addr); + pr_info("ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", + pcwd_private.io_addr); else if (pcwd_private.revision == PCWD_REVISION_C) { pcwd_get_firmware(); - printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port " - "0x%04x (Firmware version: %s)\n", + pr_info("ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n", pcwd_private.io_addr, pcwd_private.fw_ver_str); option_switches = pcwd_get_option_switches(); - printk(KERN_INFO PFX "Option switches (0x%02x): " - "Temperature Reset Enable=%s, Power On Delay=%s\n", + pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", option_switches, ((option_switches & 0x10) ? "ON" : "OFF"), ((option_switches & 0x08) ? "ON" : "OFF")); @@ -359,22 +353,18 @@ static void pcwd_show_card_info(void) } if (pcwd_private.supports_temp) - printk(KERN_INFO PFX "Temperature Option Detected\n"); + pr_info("Temperature Option Detected\n"); if (pcwd_private.boot_status & WDIOF_CARDRESET) - printk(KERN_INFO PFX - "Previous reboot was caused by the card\n"); + pr_info("Previous reboot was caused by the card\n"); if (pcwd_private.boot_status & WDIOF_OVERHEAT) { - printk(KERN_EMERG PFX - "Card senses a CPU Overheat. Panicking!\n"); - printk(KERN_EMERG PFX - "CPU Overheat\n"); + pr_emerg("Card senses a CPU Overheat. Panicking!\n"); + pr_emerg("CPU Overheat\n"); } if (pcwd_private.boot_status == 0) - printk(KERN_INFO PFX - "No previous trip detected - Cold boot or reset\n"); + pr_info("No previous trip detected - Cold boot or reset\n"); } static void pcwd_timer_ping(unsigned long data) @@ -404,8 +394,7 @@ static void pcwd_timer_ping(unsigned long data) spin_unlock(&pcwd_private.io_lock); } else { - printk(KERN_WARNING PFX - "Heartbeat lost! Will not ping the watchdog\n"); + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); } } @@ -426,13 +415,13 @@ static int pcwd_start(void) stat_reg = inb_p(pcwd_private.io_addr + 2); spin_unlock(&pcwd_private.io_lock); if (stat_reg & WD_WDIS) { - printk(KERN_INFO PFX "Could not start watchdog\n"); + pr_info("Could not start watchdog\n"); return -EIO; } } if (debug >= VERBOSE) - printk(KERN_DEBUG PFX "Watchdog started\n"); + pr_debug("Watchdog started\n"); return 0; } @@ -454,13 +443,13 @@ static int pcwd_stop(void) stat_reg = inb_p(pcwd_private.io_addr + 2); spin_unlock(&pcwd_private.io_lock); if ((stat_reg & WD_WDIS) == 0) { - printk(KERN_INFO PFX "Could not stop watchdog\n"); + pr_info("Could not stop watchdog\n"); return -EIO; } } if (debug >= VERBOSE) - printk(KERN_DEBUG PFX "Watchdog stopped\n"); + pr_debug("Watchdog stopped\n"); return 0; } @@ -471,7 +460,7 @@ static int pcwd_keepalive(void) pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ); if (debug >= DEBUG) - printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n"); + pr_debug("Watchdog keepalive signal send\n"); return 0; } @@ -484,8 +473,7 @@ static int pcwd_set_heartbeat(int t) heartbeat = t; if (debug >= VERBOSE) - printk(KERN_DEBUG PFX "New heartbeat: %d\n", - heartbeat); + pr_debug("New heartbeat: %d\n", heartbeat); return 0; } @@ -518,8 +506,7 @@ static int pcwd_get_status(int *status) if (control_status & WD_T110) { *status |= WDIOF_OVERHEAT; if (temp_panic) { - printk(KERN_INFO PFX - "Temperature overheat trip!\n"); + pr_info("Temperature overheat trip!\n"); kernel_power_off(); } } @@ -530,8 +517,7 @@ static int pcwd_get_status(int *status) if (control_status & WD_REVC_TTRP) { *status |= WDIOF_OVERHEAT; if (temp_panic) { - printk(KERN_INFO PFX - "Temperature overheat trip!\n"); + pr_info("Temperature overheat trip!\n"); kernel_power_off(); } } @@ -548,16 +534,14 @@ static int pcwd_clear_status(void) spin_lock(&pcwd_private.io_lock); if (debug >= VERBOSE) - printk(KERN_INFO PFX - "clearing watchdog trip status\n"); + pr_info("clearing watchdog trip status\n"); control_status = inb_p(pcwd_private.io_addr + 1); if (debug >= DEBUG) { - printk(KERN_DEBUG PFX "status was: 0x%02x\n", - control_status); - printk(KERN_DEBUG PFX "sending: 0x%02x\n", - (control_status & WD_REVC_R2DS)); + pr_debug("status was: 0x%02x\n", control_status); + pr_debug("sending: 0x%02x\n", + (control_status & WD_REVC_R2DS)); } /* clear reset status & Keep Relay 2 disable state as it is */ @@ -588,8 +572,7 @@ static int pcwd_get_temperature(int *temperature) spin_unlock(&pcwd_private.io_lock); if (debug >= DEBUG) { - printk(KERN_DEBUG PFX "temperature is: %d F\n", - *temperature); + pr_debug("temperature is: %d F\n", *temperature); } return 0; @@ -720,8 +703,7 @@ static int pcwd_close(struct inode *inode, struct file *file) if (expect_close == 42) pcwd_stop(); else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); pcwd_keepalive(); } expect_close = 0; @@ -828,11 +810,10 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id) int retval; if (debug >= DEBUG) - printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n", - id); + pr_debug("pcwd_isa_match id=%d\n", id); if (!request_region(base_addr, 4, "PCWD")) { - printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr); + pr_info("Port 0x%04x unavailable\n", base_addr); return 0; } @@ -870,21 +851,20 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) int ret; if (debug >= DEBUG) - printk(KERN_DEBUG PFX "pcwd_isa_probe id=%d\n", - id); + pr_debug("pcwd_isa_probe id=%d\n", id); cards_found++; if (cards_found == 1) - printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", + pr_info("v%s Ken Hollis (kenji@bitgate.com)\n", WATCHDOG_VERSION); if (cards_found > 1) { - printk(KERN_ERR PFX "This driver only supports 1 device\n"); + pr_err("This driver only supports 1 device\n"); return -ENODEV; } if (pcwd_ioports[id] == 0x0000) { - printk(KERN_ERR PFX "No I/O-Address for card detected\n"); + pr_err("No I/O-Address for card detected\n"); return -ENODEV; } pcwd_private.io_addr = pcwd_ioports[id]; @@ -896,8 +876,8 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - pcwd_private.io_addr); + pr_err("I/O address 0x%04x already in use\n", + pcwd_private.io_addr); ret = -EIO; goto error_request_region; } @@ -932,30 +912,27 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) if not reset to the default */ if (pcwd_set_heartbeat(heartbeat)) { pcwd_set_heartbeat(WATCHDOG_HEARTBEAT); - printk(KERN_INFO PFX - "heartbeat value must be 2 <= heartbeat <= 7200, using %d\n", - WATCHDOG_HEARTBEAT); + pr_info("heartbeat value must be 2 <= heartbeat <= 7200, using %d\n", + WATCHDOG_HEARTBEAT); } if (pcwd_private.supports_temp) { ret = misc_register(&temp_miscdev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - TEMP_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); goto error_misc_register_temp; } } ret = misc_register(&pcwd_miscdev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error_misc_register_watchdog; } - printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", heartbeat, nowayout); return 0; @@ -975,8 +952,7 @@ error_request_region: static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id) { if (debug >= DEBUG) - printk(KERN_DEBUG PFX "pcwd_isa_remove id=%d\n", - id); + pr_debug("pcwd_isa_remove id=%d\n", id); if (!pcwd_private.io_addr) return 1; @@ -1000,8 +976,7 @@ static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id) static void pcwd_isa_shutdown(struct device *dev, unsigned int id) { if (debug >= DEBUG) - printk(KERN_DEBUG PFX "pcwd_isa_shutdown id=%d\n", - id); + pr_debug("pcwd_isa_shutdown id=%d\n", id); pcwd_stop(); } @@ -1025,7 +1000,7 @@ static int __init pcwd_init_module(void) static void __exit pcwd_cleanup_module(void) { isa_unregister_driver(&pcwd_isa_driver); - printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); + pr_info("Watchdog Module Unloaded\n"); } module_init(pcwd_init_module); diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index b8d14f8..c891399 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -32,6 +32,8 @@ * Includes, defines, variables, module parameters, ... */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> /* For module specific items */ #include <linux/moduleparam.h> /* For new moduleparam's */ #include <linux/types.h> /* For standard types (like size_t) */ @@ -54,8 +56,7 @@ #define WATCHDOG_VERSION "1.03" #define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog" #define WATCHDOG_NAME "pcwd_pci" -#define PFX WATCHDOG_NAME ": " -#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n" +#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION /* Stuff for the PCI ID's */ #ifndef PCI_VENDOR_ID_QUICKLOGIC @@ -145,8 +146,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. " "(0<heartbeat<65536 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -159,8 +160,8 @@ static int send_command(int cmd, int *msb, int *lsb) int got_response, count; if (debug >= DEBUG) - printk(KERN_DEBUG PFX "sending following data " - "cmd=0x%02x msb=0x%02x lsb=0x%02x\n", cmd, *msb, *lsb); + pr_debug("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x\n", + cmd, *msb, *lsb); spin_lock(&pcipcwd_private.io_lock); /* If a command requires data it should be written first. @@ -185,12 +186,10 @@ static int send_command(int cmd, int *msb, int *lsb) if (debug >= DEBUG) { if (got_response) { - printk(KERN_DEBUG PFX - "time to process command was: %d ms\n", - count); + pr_debug("time to process command was: %d ms\n", + count); } else { - printk(KERN_DEBUG PFX - "card did not respond on command!\n"); + pr_debug("card did not respond on command!\n"); } } @@ -203,9 +202,8 @@ static int send_command(int cmd, int *msb, int *lsb) inb_p(pcipcwd_private.io_addr + 6); if (debug >= DEBUG) - printk(KERN_DEBUG PFX "received following data for " - "cmd=0x%02x: msb=0x%02x lsb=0x%02x\n", - cmd, *msb, *lsb); + pr_debug("received following data for cmd=0x%02x: msb=0x%02x lsb=0x%02x\n", + cmd, *msb, *lsb); } spin_unlock(&pcipcwd_private.io_lock); @@ -243,27 +241,23 @@ static void pcipcwd_show_card_info(void) /* Get switch settings */ option_switches = pcipcwd_get_option_switches(); - printk(KERN_INFO PFX "Found card at port " - "0x%04x (Firmware: %s) %s temp option\n", + pr_info("Found card at port 0x%04x (Firmware: %s) %s temp option\n", (int) pcipcwd_private.io_addr, fw_ver_str, (pcipcwd_private.supports_temp ? "with" : "without")); - printk(KERN_INFO PFX "Option switches (0x%02x): " - "Temperature Reset Enable=%s, Power On Delay=%s\n", + pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", option_switches, ((option_switches & 0x10) ? "ON" : "OFF"), ((option_switches & 0x08) ? "ON" : "OFF")); if (pcipcwd_private.boot_status & WDIOF_CARDRESET) - printk(KERN_INFO PFX - "Previous reset was caused by the Watchdog card\n"); + pr_info("Previous reset was caused by the Watchdog card\n"); if (pcipcwd_private.boot_status & WDIOF_OVERHEAT) - printk(KERN_INFO PFX "Card sensed a CPU Overheat\n"); + pr_info("Card sensed a CPU Overheat\n"); if (pcipcwd_private.boot_status == 0) - printk(KERN_INFO PFX - "No previous trip detected - Cold boot or reset\n"); + pr_info("No previous trip detected - Cold boot or reset\n"); } static int pcipcwd_start(void) @@ -278,12 +272,12 @@ static int pcipcwd_start(void) spin_unlock(&pcipcwd_private.io_lock); if (stat_reg & WD_PCI_WDIS) { - printk(KERN_ERR PFX "Card timer not enabled\n"); + pr_err("Card timer not enabled\n"); return -1; } if (debug >= VERBOSE) - printk(KERN_DEBUG PFX "Watchdog started\n"); + pr_debug("Watchdog started\n"); return 0; } @@ -303,13 +297,12 @@ static int pcipcwd_stop(void) spin_unlock(&pcipcwd_private.io_lock); if (!(stat_reg & WD_PCI_WDIS)) { - printk(KERN_ERR PFX - "Card did not acknowledge disable attempt\n"); + pr_err("Card did not acknowledge disable attempt\n"); return -1; } if (debug >= VERBOSE) - printk(KERN_DEBUG PFX "Watchdog stopped\n"); + pr_debug("Watchdog stopped\n"); return 0; } @@ -322,7 +315,7 @@ static int pcipcwd_keepalive(void) spin_unlock(&pcipcwd_private.io_lock); if (debug >= DEBUG) - printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n"); + pr_debug("Watchdog keepalive signal send\n"); return 0; } @@ -340,8 +333,7 @@ static int pcipcwd_set_heartbeat(int t) heartbeat = t; if (debug >= VERBOSE) - printk(KERN_DEBUG PFX "New heartbeat: %d\n", - heartbeat); + pr_debug("New heartbeat: %d\n", heartbeat); return 0; } @@ -357,12 +349,11 @@ static int pcipcwd_get_status(int *status) if (control_status & WD_PCI_TTRP) { *status |= WDIOF_OVERHEAT; if (temp_panic) - panic(PFX "Temperature overheat trip!\n"); + panic(KBUILD_MODNAME ": Temperature overheat trip!\n"); } if (debug >= DEBUG) - printk(KERN_DEBUG PFX "Control Status #1: 0x%02x\n", - control_status); + pr_debug("Control Status #1: 0x%02x\n", control_status); return 0; } @@ -374,14 +365,14 @@ static int pcipcwd_clear_status(void) int reset_counter; if (debug >= VERBOSE) - printk(KERN_INFO PFX "clearing watchdog trip status & LED\n"); + pr_info("clearing watchdog trip status & LED\n"); control_status = inb_p(pcipcwd_private.io_addr + 1); if (debug >= DEBUG) { - printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status); - printk(KERN_DEBUG PFX "sending: 0x%02x\n", - (control_status & WD_PCI_R2DS) | WD_PCI_WTRP); + pr_debug("status was: 0x%02x\n", control_status); + pr_debug("sending: 0x%02x\n", + (control_status & WD_PCI_R2DS) | WD_PCI_WTRP); } /* clear trip status & LED and keep mode of relay 2 */ @@ -394,8 +385,7 @@ static int pcipcwd_clear_status(void) send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter); if (debug >= DEBUG) { - printk(KERN_DEBUG PFX "reset count was: 0x%02x\n", - reset_counter); + pr_debug("reset count was: 0x%02x\n", reset_counter); } return 0; @@ -418,8 +408,7 @@ static int pcipcwd_get_temperature(int *temperature) *temperature = (*temperature * 9 / 5) + 32; if (debug >= DEBUG) { - printk(KERN_DEBUG PFX "temperature is: %d F\n", - *temperature); + pr_debug("temperature is: %d F\n", *temperature); } return 0; @@ -437,8 +426,7 @@ static int pcipcwd_get_timeleft(int *time_left) *time_left = (msb << 8) + lsb; if (debug >= VERBOSE) - printk(KERN_DEBUG PFX "Time left before next reboot: %d\n", - *time_left); + pr_debug("Time left before next reboot: %d\n", *time_left); return 0; } @@ -583,8 +571,7 @@ static int pcipcwd_open(struct inode *inode, struct file *file) /* /dev/watchdog can only be opened once */ if (test_and_set_bit(0, &is_active)) { if (debug >= VERBOSE) - printk(KERN_ERR PFX - "Attempt to open already opened device.\n"); + pr_err("Attempt to open already opened device\n"); return -EBUSY; } @@ -602,8 +589,7 @@ static int pcipcwd_release(struct inode *inode, struct file *file) if (expect_release == 42) { pcipcwd_stop(); } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); pcipcwd_keepalive(); } expect_release = 0; @@ -703,20 +689,20 @@ static int __devinit pcipcwd_card_init(struct pci_dev *pdev, cards_found++; if (cards_found == 1) - printk(KERN_INFO PFX DRIVER_VERSION); + pr_info("%s\n", DRIVER_VERSION); if (cards_found > 1) { - printk(KERN_ERR PFX "This driver only supports 1 device\n"); + pr_err("This driver only supports 1 device\n"); return -ENODEV; } if (pci_enable_device(pdev)) { - printk(KERN_ERR PFX "Not possible to enable PCI Device\n"); + pr_err("Not possible to enable PCI Device\n"); return -ENODEV; } if (pci_resource_start(pdev, 0) == 0x0000) { - printk(KERN_ERR PFX "No I/O-Address for card detected\n"); + pr_err("No I/O-Address for card detected\n"); ret = -ENODEV; goto err_out_disable_device; } @@ -725,8 +711,8 @@ static int __devinit pcipcwd_card_init(struct pci_dev *pdev, pcipcwd_private.io_addr = pci_resource_start(pdev, 0); if (pci_request_regions(pdev, WATCHDOG_NAME)) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - (int) pcipcwd_private.io_addr); + pr_err("I/O address 0x%04x already in use\n", + (int) pcipcwd_private.io_addr); ret = -EIO; goto err_out_disable_device; } @@ -755,36 +741,33 @@ static int __devinit pcipcwd_card_init(struct pci_dev *pdev, * if not reset to the default */ if (pcipcwd_set_heartbeat(heartbeat)) { pcipcwd_set_heartbeat(WATCHDOG_HEARTBEAT); - printk(KERN_INFO PFX - "heartbeat value must be 0<heartbeat<65536, using %d\n", + pr_info("heartbeat value must be 0<heartbeat<65536, using %d\n", WATCHDOG_HEARTBEAT); } ret = register_reboot_notifier(&pcipcwd_notifier); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto err_out_release_region; } if (pcipcwd_private.supports_temp) { ret = misc_register(&pcipcwd_temp_miscdev); if (ret != 0) { - printk(KERN_ERR PFX "cannot register miscdev on " - "minor=%d (err=%d)\n", TEMP_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); goto err_out_unregister_reboot; } } ret = misc_register(&pcipcwd_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto err_out_misc_deregister; } - printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", heartbeat, nowayout); return 0; @@ -842,7 +825,7 @@ static void __exit pcipcwd_cleanup_module(void) { pci_unregister_driver(&pcipcwd_driver); - printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); + pr_info("Watchdog Module Unloaded\n"); } module_init(pcipcwd_init_module); diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index d8de1dd..7b14d18 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -24,6 +24,8 @@ * http://www.berkprod.com/ or http://www.pcwatchdog.com/ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> /* For module specific items */ #include <linux/moduleparam.h> /* For new moduleparam's */ #include <linux/types.h> /* For standard types (like size_t) */ @@ -42,17 +44,23 @@ #include <linux/hid.h> /* For HID_REQ_SET_REPORT & HID_DT_REPORT */ #include <linux/uaccess.h> /* For copy_to_user/put_user/... */ - #ifdef CONFIG_USB_DEBUG - static int debug = 1; +static int debug = 1; #else - static int debug; +static int debug; #endif /* Use our own dbg macro */ + #undef dbg -#define dbg(format, arg...) \ - do { if (debug) printk(KERN_DEBUG PFX format "\n" , ## arg); } while (0) +#ifndef DEBUG +#define DEBUG +#endif +#define dbg(format, ...) \ +do { \ + if (debug) \ + pr_debug(format "\n", ##__VA_ARGS__); \ +} while (0) /* Module and Version Information */ #define DRIVER_VERSION "1.02" @@ -60,7 +68,6 @@ #define DRIVER_DESC "Berkshire USB-PC Watchdog driver" #define DRIVER_LICENSE "GPL" #define DRIVER_NAME "pcwd_usb" -#define PFX DRIVER_NAME ": " MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); @@ -80,8 +87,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. " "(0<heartbeat<65536 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -220,8 +227,8 @@ static void usb_pcwd_intr_done(struct urb *urb) resubmit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - printk(KERN_ERR PFX "can't resubmit intr, " - "usb_submit_urb failed with result %d\n", retval); + pr_err("can't resubmit intr, usb_submit_urb failed with result %d\n", + retval); } static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, @@ -284,8 +291,7 @@ static int usb_pcwd_start(struct usb_pcwd_private *usb_pcwd) &msb, &lsb); if ((retval == 0) || (lsb == 0)) { - printk(KERN_ERR PFX - "Card did not acknowledge enable attempt\n"); + pr_err("Card did not acknowledge enable attempt\n"); return -1; } @@ -303,8 +309,7 @@ static int usb_pcwd_stop(struct usb_pcwd_private *usb_pcwd) &msb, &lsb); if ((retval == 0) || (lsb != 0)) { - printk(KERN_ERR PFX - "Card did not acknowledge disable attempt\n"); + pr_err("Card did not acknowledge disable attempt\n"); return -1; } @@ -506,8 +511,7 @@ static int usb_pcwd_release(struct inode *inode, struct file *file) if (expect_release == 42) { usb_pcwd_stop(usb_pcwd_device); } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); usb_pcwd_keepalive(usb_pcwd_device); } expect_release = 0; @@ -627,7 +631,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, cards_found++; if (cards_found > 1) { - printk(KERN_ERR PFX "This driver only supports 1 device\n"); + pr_err("This driver only supports 1 device\n"); return -ENODEV; } @@ -636,8 +640,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, /* check out that we have a HID device */ if (!(iface_desc->desc.bInterfaceClass == USB_CLASS_HID)) { - printk(KERN_ERR PFX - "The device isn't a Human Interface Device\n"); + pr_err("The device isn't a Human Interface Device\n"); return -ENODEV; } @@ -646,7 +649,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, if (!usb_endpoint_is_int_in(endpoint)) { /* we didn't find a Interrupt endpoint with direction IN */ - printk(KERN_ERR PFX "Couldn't find an INTR & IN endpoint\n"); + pr_err("Couldn't find an INTR & IN endpoint\n"); return -ENODEV; } @@ -657,7 +660,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, /* allocate memory for our device and initialize it */ usb_pcwd = kzalloc(sizeof(struct usb_pcwd_private), GFP_KERNEL); if (usb_pcwd == NULL) { - printk(KERN_ERR PFX "Out of memory\n"); + pr_err("Out of memory\n"); goto error; } @@ -674,14 +677,14 @@ static int usb_pcwd_probe(struct usb_interface *interface, usb_pcwd->intr_buffer = usb_alloc_coherent(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma); if (!usb_pcwd->intr_buffer) { - printk(KERN_ERR PFX "Out of memory\n"); + pr_err("Out of memory\n"); goto error; } /* allocate the urb's */ usb_pcwd->intr_urb = usb_alloc_urb(0, GFP_KERNEL); if (!usb_pcwd->intr_urb) { - printk(KERN_ERR PFX "Out of memory\n"); + pr_err("Out of memory\n"); goto error; } @@ -694,7 +697,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, /* register our interrupt URB with the USB system */ if (usb_submit_urb(usb_pcwd->intr_urb, GFP_KERNEL)) { - printk(KERN_ERR PFX "Problem registering interrupt URB\n"); + pr_err("Problem registering interrupt URB\n"); retval = -EIO; /* failure */ goto error; } @@ -713,15 +716,13 @@ static int usb_pcwd_probe(struct usb_interface *interface, else sprintf(fw_ver_str, "<card no answer>"); - printk(KERN_INFO PFX "Found card (Firmware: %s) with temp option\n", - fw_ver_str); + pr_info("Found card (Firmware: %s) with temp option\n", fw_ver_str); /* Get switch settings */ usb_pcwd_send_command(usb_pcwd, CMD_GET_DIP_SWITCH_SETTINGS, &dummy, &option_switches); - printk(KERN_INFO PFX "Option switches (0x%02x): " - "Temperature Reset Enable=%s, Power On Delay=%s\n", + pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", option_switches, ((option_switches & 0x10) ? "ON" : "OFF"), ((option_switches & 0x08) ? "ON" : "OFF")); @@ -734,39 +735,34 @@ static int usb_pcwd_probe(struct usb_interface *interface, * if not reset to the default */ if (usb_pcwd_set_heartbeat(usb_pcwd, heartbeat)) { usb_pcwd_set_heartbeat(usb_pcwd, WATCHDOG_HEARTBEAT); - printk(KERN_INFO PFX - "heartbeat value must be 0<heartbeat<65536, using %d\n", + pr_info("heartbeat value must be 0<heartbeat<65536, using %d\n", WATCHDOG_HEARTBEAT); } retval = register_reboot_notifier(&usb_pcwd_notifier); if (retval != 0) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", - retval); + pr_err("cannot register reboot notifier (err=%d)\n", retval); goto error; } retval = misc_register(&usb_pcwd_temperature_miscdev); if (retval != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - TEMP_MINOR, retval); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, retval); goto err_out_unregister_reboot; } retval = misc_register(&usb_pcwd_miscdev); if (retval != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, retval); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, retval); goto err_out_misc_deregister; } /* we can register the device now, as it is ready */ usb_set_intfdata(interface, usb_pcwd); - printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", heartbeat, nowayout); return 0; @@ -824,7 +820,7 @@ static void usb_pcwd_disconnect(struct usb_interface *interface) mutex_unlock(&disconnect_mutex); - printk(KERN_INFO PFX "USB PC Watchdog disconnected\n"); + pr_info("USB PC Watchdog disconnected\n"); } module_usb_driver(usb_pcwd_driver); diff --git a/drivers/watchdog/pika_wdt.c b/drivers/watchdog/pika_wdt.c index 2d22e99..7d3d471 100644 --- a/drivers/watchdog/pika_wdt.c +++ b/drivers/watchdog/pika_wdt.c @@ -5,6 +5,8 @@ * Sean MacLennan <smaclennan@pikatech.com> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/errno.h> #include <linux/module.h> @@ -23,7 +25,6 @@ #include <linux/of_platform.h> #define DRV_NAME "PIKA-WDT" -#define PFX DRV_NAME ": " /* Hardware timeout in seconds */ #define WDT_HW_TIMEOUT 2 @@ -38,8 +39,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -90,7 +91,7 @@ static void pikawdt_ping(unsigned long data) pikawdt_reset(); mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT); } else - printk(KERN_CRIT PFX "I will reset your machine !\n"); + pr_crit("I will reset your machine !\n"); } @@ -228,14 +229,14 @@ static int __init pikawdt_init(void) np = of_find_compatible_node(NULL, NULL, "pika,fpga"); if (np == NULL) { - printk(KERN_ERR PFX "Unable to find fpga.\n"); + pr_err("Unable to find fpga\n"); return -ENOENT; } pikawdt_private.fpga = of_iomap(np, 0); of_node_put(np); if (pikawdt_private.fpga == NULL) { - printk(KERN_ERR PFX "Unable to map fpga.\n"); + pr_err("Unable to map fpga\n"); return -ENOMEM; } @@ -244,7 +245,7 @@ static int __init pikawdt_init(void) /* POST information is in the sd area. */ np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd"); if (np == NULL) { - printk(KERN_ERR PFX "Unable to find fpga-sd.\n"); + pr_err("Unable to find fpga-sd\n"); ret = -ENOENT; goto out; } @@ -252,7 +253,7 @@ static int __init pikawdt_init(void) fpga = of_iomap(np, 0); of_node_put(np); if (fpga == NULL) { - printk(KERN_ERR PFX "Unable to map fpga-sd.\n"); + pr_err("Unable to map fpga-sd\n"); ret = -ENOMEM; goto out; } @@ -271,12 +272,12 @@ static int __init pikawdt_init(void) ret = misc_register(&pikawdt_miscdev); if (ret) { - printk(KERN_ERR PFX "Unable to register miscdev.\n"); + pr_err("Unable to register miscdev\n"); goto out; } - printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", - heartbeat, nowayout); + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); return 0; out: diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index dfae030..6b8432f 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -8,33 +8,32 @@ * Based on sa1100 driver, * Copyright (C) 2000 Oleg Drokin <green@crimea.edu> * - * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * 2005-2006 (c) MontaVista Software, Inc. + * + * (C) 2012 Wolfram Sang, Pengutronix + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/fs.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/init.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <linux/device.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/spinlock.h> -#include <linux/uaccess.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/err.h> #include <mach/hardware.h> -#define MODULE_NAME "PNX4008-WDT: " - /* WatchDog Timer - Chapter 23 Page 207 */ #define DEFAULT_HEARTBEAT 19 @@ -77,251 +76,128 @@ #define WDOG_COUNTER_RATE 13000000 /*the counter clock is 13 MHz fixed */ -static int nowayout = WATCHDOG_NOWAYOUT; -static int heartbeat = DEFAULT_HEARTBEAT; +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int heartbeat = DEFAULT_HEARTBEAT; static DEFINE_SPINLOCK(io_lock); -static unsigned long wdt_status; -#define WDT_IN_USE 0 -#define WDT_OK_TO_CLOSE 1 -#define WDT_REGION_INITED 2 -#define WDT_DEVICE_INITED 3 - -static unsigned long boot_status; - -static struct resource *wdt_mem; static void __iomem *wdt_base; struct clk *wdt_clk; -static void wdt_enable(void) +static int pnx4008_wdt_start(struct watchdog_device *wdd) { spin_lock(&io_lock); /* stop counter, initiate counter reset */ - __raw_writel(RESET_COUNT, WDTIM_CTRL(wdt_base)); + writel(RESET_COUNT, WDTIM_CTRL(wdt_base)); /*wait for reset to complete. 100% guarantee event */ - while (__raw_readl(WDTIM_COUNTER(wdt_base))) + while (readl(WDTIM_COUNTER(wdt_base))) cpu_relax(); /* internal and external reset, stop after that */ - __raw_writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, - WDTIM_MCTRL(wdt_base)); + writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, WDTIM_MCTRL(wdt_base)); /* configure match output */ - __raw_writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base)); + writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base)); /* clear interrupt, just in case */ - __raw_writel(MATCH_INT, WDTIM_INT(wdt_base)); + writel(MATCH_INT, WDTIM_INT(wdt_base)); /* the longest pulse period 65541/(13*10^6) seconds ~ 5 ms. */ - __raw_writel(0xFFFF, WDTIM_PULSE(wdt_base)); - __raw_writel(heartbeat * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base)); + writel(0xFFFF, WDTIM_PULSE(wdt_base)); + writel(wdd->timeout * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base)); /*enable counter, stop when debugger active */ - __raw_writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base)); + writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base)); spin_unlock(&io_lock); + return 0; } -static void wdt_disable(void) +static int pnx4008_wdt_stop(struct watchdog_device *wdd) { spin_lock(&io_lock); - __raw_writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */ + writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */ spin_unlock(&io_lock); + return 0; } -static int pnx4008_wdt_open(struct inode *inode, struct file *file) -{ - int ret; - - if (test_and_set_bit(WDT_IN_USE, &wdt_status)) - return -EBUSY; - - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - - ret = clk_enable(wdt_clk); - if (ret) { - clear_bit(WDT_IN_USE, &wdt_status); - return ret; - } - - wdt_enable(); - - return nonseekable_open(inode, file); -} - -static ssize_t pnx4008_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) +static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int new_timeout) { - if (len) { - if (!nowayout) { - size_t i; - - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - - for (i = 0; i != len; i++) { - char c; - - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - set_bit(WDT_OK_TO_CLOSE, &wdt_status); - } - } - wdt_enable(); - } - - return len; + wdd->timeout = new_timeout; + return 0; } -static const struct watchdog_info ident = { +static const struct watchdog_info pnx4008_wdt_ident = { .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "PNX4008 Watchdog", }; -static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - int ret = -ENOTTY; - int time; - - switch (cmd) { - case WDIOC_GETSUPPORT: - ret = copy_to_user((struct watchdog_info *)arg, &ident, - sizeof(ident)) ? -EFAULT : 0; - break; - - case WDIOC_GETSTATUS: - ret = put_user(0, (int *)arg); - break; - - case WDIOC_GETBOOTSTATUS: - ret = put_user(boot_status, (int *)arg); - break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; - - case WDIOC_SETTIMEOUT: - ret = get_user(time, (int *)arg); - if (ret) - break; - - if (time <= 0 || time > MAX_HEARTBEAT) { - ret = -EINVAL; - break; - } - - heartbeat = time; - wdt_enable(); - /* Fall through */ - - case WDIOC_GETTIMEOUT: - ret = put_user(heartbeat, (int *)arg); - break; - } - return ret; -} - -static int pnx4008_wdt_release(struct inode *inode, struct file *file) -{ - if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status)) - printk(KERN_WARNING "WATCHDOG: Device closed unexpectedly\n"); - - wdt_disable(); - clk_disable(wdt_clk); - clear_bit(WDT_IN_USE, &wdt_status); - clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - - return 0; -} - -static const struct file_operations pnx4008_wdt_fops = { +static const struct watchdog_ops pnx4008_wdt_ops = { .owner = THIS_MODULE, - .llseek = no_llseek, - .write = pnx4008_wdt_write, - .unlocked_ioctl = pnx4008_wdt_ioctl, - .open = pnx4008_wdt_open, - .release = pnx4008_wdt_release, + .start = pnx4008_wdt_start, + .stop = pnx4008_wdt_stop, + .set_timeout = pnx4008_wdt_set_timeout, }; -static struct miscdevice pnx4008_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &pnx4008_wdt_fops, +static struct watchdog_device pnx4008_wdd = { + .info = &pnx4008_wdt_ident, + .ops = &pnx4008_wdt_ops, + .min_timeout = 1, + .max_timeout = MAX_HEARTBEAT, }; static int __devinit pnx4008_wdt_probe(struct platform_device *pdev) { - int ret = 0, size; + struct resource *r; + int ret = 0; if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) heartbeat = DEFAULT_HEARTBEAT; - printk(KERN_INFO MODULE_NAME - "PNX4008 Watchdog Timer: heartbeat %d sec\n", heartbeat); - - wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (wdt_mem == NULL) { - printk(KERN_INFO MODULE_NAME - "failed to get memory region resource\n"); - return -ENOENT; - } - - size = resource_size(wdt_mem); - - if (!request_mem_region(wdt_mem->start, size, pdev->name)) { - printk(KERN_INFO MODULE_NAME "failed to get memory region\n"); - return -ENOENT; - } - wdt_base = (void __iomem *)IO_ADDRESS(wdt_mem->start); + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + wdt_base = devm_request_and_ioremap(&pdev->dev, r); + if (!wdt_base) + return -EADDRINUSE; wdt_clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(wdt_clk)) { - ret = PTR_ERR(wdt_clk); - release_mem_region(wdt_mem->start, size); - wdt_mem = NULL; - goto out; - } + if (IS_ERR(wdt_clk)) + return PTR_ERR(wdt_clk); ret = clk_enable(wdt_clk); - if (ret) { - release_mem_region(wdt_mem->start, size); - wdt_mem = NULL; - clk_put(wdt_clk); + if (ret) goto out; - } - ret = misc_register(&pnx4008_wdt_miscdev); + pnx4008_wdd.timeout = heartbeat; + pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ? + WDIOF_CARDRESET : 0; + watchdog_set_nowayout(&pnx4008_wdd, nowayout); + + pnx4008_wdt_stop(&pnx4008_wdd); /* disable for now */ + + ret = watchdog_register_device(&pnx4008_wdd); if (ret < 0) { - printk(KERN_ERR MODULE_NAME "cannot register misc device\n"); - release_mem_region(wdt_mem->start, size); - wdt_mem = NULL; - clk_disable(wdt_clk); - clk_put(wdt_clk); - } else { - boot_status = (__raw_readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ? - WDIOF_CARDRESET : 0; - wdt_disable(); /*disable for now */ - clk_disable(wdt_clk); - set_bit(WDT_DEVICE_INITED, &wdt_status); + dev_err(&pdev->dev, "cannot register watchdog device\n"); + goto disable_clk; } + dev_info(&pdev->dev, "PNX4008 Watchdog Timer: heartbeat %d sec\n", + heartbeat); + + return 0; + +disable_clk: + clk_disable(wdt_clk); out: + clk_put(wdt_clk); return ret; } static int __devexit pnx4008_wdt_remove(struct platform_device *pdev) { - misc_deregister(&pnx4008_wdt_miscdev); + watchdog_unregister_device(&pnx4008_wdd); clk_disable(wdt_clk); clk_put(wdt_clk); - if (wdt_mem) { - release_mem_region(wdt_mem->start, resource_size(wdt_mem)); - wdt_mem = NULL; - } return 0; } @@ -337,15 +213,16 @@ static struct platform_driver platform_wdt_driver = { module_platform_driver(platform_wdt_driver); MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); +MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>"); MODULE_DESCRIPTION("PNX4008 Watchdog Driver"); -module_param(heartbeat, int, 0); +module_param(heartbeat, uint, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat period in seconds from 1 to " __MODULE_STRING(MAX_HEARTBEAT) ", default " __MODULE_STRING(DEFAULT_HEARTBEAT)); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Set to 1 to keep watchdog running after device release"); diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c index a7b5ad2..1b62a7d 100644 --- a/drivers/watchdog/pnx833x_wdt.c +++ b/drivers/watchdog/pnx833x_wdt.c @@ -17,6 +17,8 @@ * based on softdog.c by Alan Cox <alan@redhat.com> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -30,7 +32,6 @@ #include <linux/init.h> #include <asm/mach-pnx833x/pnx833x.h> -#define PFX "pnx833x: " #define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */ #define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ #define PNX_WATCHDOG_TIMEOUT (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY) @@ -54,8 +55,8 @@ module_param(pnx833x_wdt_timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" __MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds)."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -76,7 +77,7 @@ static void pnx833x_wdt_start(void) PNX833X_REG(PNX833X_CONFIG + PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1; - printk(KERN_INFO PFX "Started watchdog timer.\n"); + pr_info("Started watchdog timer\n"); } static void pnx833x_wdt_stop(void) @@ -87,7 +88,7 @@ static void pnx833x_wdt_stop(void) PNX833X_REG(PNX833X_CONFIG + PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE; - printk(KERN_INFO PFX "Stopped watchdog timer.\n"); + pr_info("Stopped watchdog timer\n"); } static void pnx833x_wdt_ping(void) @@ -113,7 +114,7 @@ static int pnx833x_wdt_open(struct inode *inode, struct file *file) pnx833x_wdt_ping(); - printk(KERN_INFO "Started watchdog timer.\n"); + pr_info("Started watchdog timer\n"); return nonseekable_open(inode, file); } @@ -232,9 +233,6 @@ static struct notifier_block pnx833x_wdt_notifier = { .notifier_call = pnx833x_wdt_notify_sys, }; -static char banner[] __initdata = - KERN_INFO PFX "Hardware Watchdog Timer for PNX833x: Version 0.1\n"; - static int __init watchdog_init(void) { int ret, cause; @@ -243,27 +241,25 @@ static int __init watchdog_init(void) cause = PNX833X_REG(PNX833X_RESET); /*If bit 31 is set then watchdog was cause of reset.*/ if (cause & 0x80000000) { - printk(KERN_INFO PFX "The system was previously reset due to " - "the watchdog firing - please investigate...\n"); + pr_info("The system was previously reset due to the watchdog firing - please investigate...\n"); } ret = register_reboot_notifier(&pnx833x_wdt_notifier); if (ret) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); return ret; } ret = misc_register(&pnx833x_wdt_miscdev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); unregister_reboot_notifier(&pnx833x_wdt_notifier); return ret; } - printk(banner); + pr_info("Hardware Watchdog Timer for PNX833x: Version 0.1\n"); + if (start_enabled) pnx833x_wdt_start(); diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index bf7bc8a..547353a 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -17,6 +17,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> /* For module specific items */ #include <linux/moduleparam.h> /* For new moduleparam's */ #include <linux/types.h> /* For standard types (like size_t) */ @@ -33,8 +35,6 @@ #include <asm/mach-rc32434/integ.h> /* For the Watchdog registers */ -#define PFX KBUILD_MODNAME ": " - #define VERSION "1.0" static struct { @@ -64,8 +64,8 @@ module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout value, in seconds (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -78,8 +78,7 @@ static int rc32434_wdt_set(int new_timeout) int max_to = WTCOMP2SEC((u32)-1); if (new_timeout < 0 || new_timeout > max_to) { - printk(KERN_ERR PFX "timeout value must be between 0 and %d", - max_to); + pr_err("timeout value must be between 0 and %d\n", max_to); return -EINVAL; } timeout = new_timeout; @@ -119,7 +118,7 @@ static void rc32434_wdt_start(void) SET_BITS(wdt_reg->wtc, or, nand); spin_unlock(&rc32434_wdt_device.io_lock); - printk(KERN_INFO PFX "Started watchdog timer.\n"); + pr_info("Started watchdog timer\n"); } static void rc32434_wdt_stop(void) @@ -130,7 +129,7 @@ static void rc32434_wdt_stop(void) SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN); spin_unlock(&rc32434_wdt_device.io_lock); - printk(KERN_INFO PFX "Stopped watchdog timer.\n"); + pr_info("Stopped watchdog timer\n"); } static void rc32434_wdt_ping(void) @@ -160,8 +159,7 @@ static int rc32434_wdt_release(struct inode *inode, struct file *file) rc32434_wdt_stop(); module_put(THIS_MODULE); } else { - printk(KERN_CRIT PFX - "device closed unexpectedly. WDT will not stop!\n"); + pr_crit("device closed unexpectedly. WDT will not stop!\n"); rc32434_wdt_ping(); } clear_bit(0, &rc32434_wdt_device.inuse); @@ -262,9 +260,6 @@ static struct miscdevice rc32434_wdt_miscdev = { .fops = &rc32434_wdt_fops, }; -static char banner[] __devinitdata = KERN_INFO PFX - "Watchdog Timer version " VERSION ", timer margin: %d sec\n"; - static int __devinit rc32434_wdt_probe(struct platform_device *pdev) { int ret; @@ -272,13 +267,13 @@ static int __devinit rc32434_wdt_probe(struct platform_device *pdev) r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res"); if (!r) { - printk(KERN_ERR PFX "failed to retrieve resources\n"); + pr_err("failed to retrieve resources\n"); return -ENODEV; } wdt_reg = ioremap_nocache(r->start, resource_size(r)); if (!wdt_reg) { - printk(KERN_ERR PFX "failed to remap I/O resources\n"); + pr_err("failed to remap I/O resources\n"); return -ENXIO; } @@ -291,18 +286,18 @@ static int __devinit rc32434_wdt_probe(struct platform_device *pdev) * if not reset to the default */ if (rc32434_wdt_set(timeout)) { rc32434_wdt_set(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be between 0 and %d\n", + pr_info("timeout value must be between 0 and %d\n", WTCOMP2SEC((u32)-1)); } ret = misc_register(&rc32434_wdt_miscdev); if (ret < 0) { - printk(KERN_ERR PFX "failed to register watchdog device\n"); + pr_err("failed to register watchdog device\n"); goto unmap; } - printk(banner, timeout); + pr_info("Watchdog Timer version " VERSION ", timer margin: %d sec\n", + timeout); return 0; diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c index c7e17ce..49e1b1c 100644 --- a/drivers/watchdog/riowd.c +++ b/drivers/watchdog/riowd.c @@ -3,6 +3,8 @@ * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net) */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/types.h> @@ -189,7 +191,7 @@ static int __devinit riowd_probe(struct platform_device *op) p->regs = of_ioremap(&op->resource[0], 0, 2, DRIVER_NAME); if (!p->regs) { - printk(KERN_ERR PFX "Cannot map registers.\n"); + pr_err("Cannot map registers\n"); goto out_free; } /* Make miscdev useable right away */ @@ -197,12 +199,12 @@ static int __devinit riowd_probe(struct platform_device *op) err = misc_register(&riowd_miscdev); if (err) { - printk(KERN_ERR PFX "Cannot register watchdog misc device.\n"); + pr_err("Cannot register watchdog misc device\n"); goto out_iounmap; } - printk(KERN_INFO PFX "Hardware watchdog [%i minutes], " - "regs at %p\n", riowd_timeout, p->regs); + pr_info("Hardware watchdog [%i minutes], regs at %p\n", + riowd_timeout, p->regs); dev_set_drvdata(&op->dev, p); return 0; diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 404172f..04e5a6d 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -23,6 +23,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -46,12 +48,10 @@ #include <plat/regs-watchdog.h> -#define PFX "s3c2410-wdt: " - #define CONFIG_S3C2410_WATCHDOG_ATBOOT (0) #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15) -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME; static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT; static int soft_noboot; @@ -59,7 +59,7 @@ static int debug; module_param(tmr_margin, int, 0); module_param(tmr_atboot, int, 0); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); module_param(soft_noboot, int, 0); module_param(debug, int, 0); @@ -84,10 +84,11 @@ static DEFINE_SPINLOCK(wdt_lock); /* watchdog control routines */ -#define DBG(msg...) do { \ - if (debug) \ - printk(KERN_INFO msg); \ - } while (0) +#define DBG(fmt, ...) \ +do { \ + if (debug) \ + pr_info(fmt, ##__VA_ARGS__); \ +} while (0) /* functions */ @@ -200,6 +201,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeou writel(count, wdt_base + S3C2410_WTDAT); writel(wtcon, wdt_base + S3C2410_WTCON); + wdd->timeout = timeout; + return 0; } @@ -354,7 +357,7 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) ret = s3c2410wdt_cpufreq_register(); if (ret < 0) { - printk(KERN_ERR PFX "failed to register cpufreq\n"); + pr_err("failed to register cpufreq\n"); goto err_clk; } @@ -483,8 +486,8 @@ static int s3c2410wdt_resume(struct platform_device *dev) writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */ writel(wtcon_save, wdt_base + S3C2410_WTCON); - printk(KERN_INFO PFX "watchdog %sabled\n", - (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis"); + pr_info("watchdog %sabled\n", + (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis"); return 0; } @@ -518,12 +521,10 @@ static struct platform_driver s3c2410wdt_driver = { }; -static char banner[] __initdata = - KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; - static int __init watchdog_init(void) { - printk(banner); + pr_info("S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"); + return platform_driver_register(&s3c2410wdt_driver); } diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 0162454..54984de 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -17,6 +17,9 @@ * * 27/11/2000 Initial release */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -25,6 +28,7 @@ #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/bitops.h> #include <linux/uaccess.h> #include <linux/timex.h> @@ -66,7 +70,7 @@ static int sa1100dog_open(struct inode *inode, struct file *file) */ static int sa1100dog_release(struct inode *inode, struct file *file) { - printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n"); + pr_crit("Device closed - timer will not stop\n"); clear_bit(1, &sa1100wdt_users); return 0; } @@ -169,9 +173,8 @@ static int __init sa1100dog_init(void) ret = misc_register(&sa1100dog_miscdev); if (ret == 0) - printk(KERN_INFO - "SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", - margin); + pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", + margin); return ret; } diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index b01a30e..25c7a3f 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -43,6 +43,9 @@ * version 1 or 2 as published by the Free Software Foundation. * */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/io.h> #include <linux/uaccess.h> @@ -125,9 +128,8 @@ static int sbwdog_release(struct inode *inode, struct file *file) __raw_writeb(0, user_dog); module_put(THIS_MODULE); } else { - printk(KERN_CRIT - "%s: Unexpected close, not stopping watchdog!\n", - ident.identity); + pr_crit("%s: Unexpected close, not stopping watchdog!\n", + ident.identity); sbwdog_pet(user_dog); } clear_bit(0, &sbwdog_gate); @@ -269,7 +271,7 @@ irqreturn_t sbwdog_interrupt(int irq, void *addr) * if it's the second watchdog timer, it's for those users */ if (wd_cfg_reg == user_dog) - printk(KERN_CRIT "%s in danger of initiating system reset " + pr_crit("%s in danger of initiating system reset " "in %ld.%01ld seconds\n", ident.identity, wd_init / 1000000, (wd_init / 100000) % 10); @@ -290,9 +292,8 @@ static int __init sbwdog_init(void) */ ret = register_reboot_notifier(&sbwdog_notifier); if (ret) { - printk(KERN_ERR - "%s: cannot register reboot notifier (err=%d)\n", - ident.identity, ret); + pr_err("%s: cannot register reboot notifier (err=%d)\n", + ident.identity, ret); return ret; } @@ -303,16 +304,16 @@ static int __init sbwdog_init(void) ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED, ident.identity, (void *)user_dog); if (ret) { - printk(KERN_ERR "%s: failed to request irq 1 - %d\n", - ident.identity, ret); + pr_err("%s: failed to request irq 1 - %d\n", + ident.identity, ret); goto out; } ret = misc_register(&sbwdog_miscdev); if (ret == 0) { - printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", - ident.identity, - timeout / 1000000, (timeout / 100000) % 10); + pr_info("%s: timeout is %ld.%ld secs\n", + ident.identity, + timeout / 1000000, (timeout / 100000) % 10); return 0; } free_irq(1, (void *)user_dog); @@ -353,8 +354,7 @@ void platform_wd_setup(void) ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED, "Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0)); if (ret) { - printk(KERN_CRIT - "Watchdog IRQ zero(0) failed to be requested - %d\n", ret); + pr_crit("Watchdog IRQ zero(0) failed to be requested - %d\n", ret); } } diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c index 626d0e8..63632ec 100644 --- a/drivers/watchdog/sbc60xxwdt.c +++ b/drivers/watchdog/sbc60xxwdt.c @@ -48,6 +48,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -63,7 +65,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #define OUR_NAME "sbc60xxwdt" #define PFX OUR_NAME ": " @@ -105,8 +106,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -132,8 +133,7 @@ static void wdt_timer_ping(unsigned long data) /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); } else - printk(KERN_WARNING PFX - "Heartbeat lost! Will not ping the watchdog\n"); + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -146,7 +146,7 @@ static void wdt_startup(void) /* Start the timer */ mod_timer(&timer, jiffies + WDT_INTERVAL); - printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); + pr_info("Watchdog timer is now enabled\n"); } static void wdt_turnoff(void) @@ -154,7 +154,7 @@ static void wdt_turnoff(void) /* Stop the timer */ del_timer(&timer); inb_p(wdt_stop); - printk(KERN_INFO PFX "Watchdog timer is now disabled...\n"); + pr_info("Watchdog timer is now disabled...\n"); } static void wdt_keepalive(void) @@ -217,8 +217,7 @@ static int fop_close(struct inode *inode, struct file *file) wdt_turnoff(); else { del_timer(&timer); - printk(KERN_CRIT PFX - "device file closed unexpectedly. Will not stop the WDT!\n"); + pr_crit("device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; @@ -335,14 +334,12 @@ static int __init sbc60xxwdt_init(void) if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX - "timeout value must be 1 <= x <= 3600, using %d\n", - timeout); + pr_info("timeout value must be 1 <= x <= 3600, using %d\n", + timeout); } if (!request_region(wdt_start, 1, "SBC 60XX WDT")) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_start); + pr_err("I/O address 0x%04x already in use\n", wdt_start); rc = -EIO; goto err_out; } @@ -350,9 +347,7 @@ static int __init sbc60xxwdt_init(void) /* We cannot reserve 0x45 - the kernel already has! */ if (wdt_stop != 0x45 && wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) { - printk(KERN_ERR PFX - "I/O address 0x%04x already in use\n", - wdt_stop); + pr_err("I/O address 0x%04x already in use\n", wdt_stop); rc = -EIO; goto err_out_region1; } @@ -360,21 +355,18 @@ static int __init sbc60xxwdt_init(void) rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", rc); + pr_err("cannot register reboot notifier (err=%d)\n", rc); goto err_out_region2; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX - "WDT driver for 60XX single board computer initialised. " - "timeout=%d sec (nowayout=%d)\n", timeout, nowayout); + pr_info("WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); return 0; diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c index 93ac589..719edc8 100644 --- a/drivers/watchdog/sbc7240_wdt.c +++ b/drivers/watchdog/sbc7240_wdt.c @@ -16,6 +16,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/fs.h> #include <linux/init.h> #include <linux/ioport.h> @@ -30,9 +32,6 @@ #include <linux/io.h> #include <linux/uaccess.h> #include <linux/atomic.h> -#include <asm/system.h> - -#define SBC7240_PREFIX "sbc7240_wdt: " #define SBC7240_ENABLE_PORT 0x443 #define SBC7240_DISABLE_PORT 0x043 @@ -47,8 +46,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=" __MODULE_STRING(SBC7240_MAX_TIMEOUT) ", default=" __MODULE_STRING(SBC7240_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog when closing device file"); #define SBC7240_OPEN_STATUS_BIT 0 @@ -65,8 +64,7 @@ static void wdt_disable(void) /* disable the watchdog */ if (test_and_clear_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) { inb_p(SBC7240_DISABLE_PORT); - printk(KERN_INFO SBC7240_PREFIX - "Watchdog timer is now disabled.\n"); + pr_info("Watchdog timer is now disabled\n"); } } @@ -75,23 +73,20 @@ static void wdt_enable(void) /* enable the watchdog */ if (!test_and_set_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) { inb_p(SBC7240_ENABLE_PORT); - printk(KERN_INFO SBC7240_PREFIX - "Watchdog timer is now enabled.\n"); + pr_info("Watchdog timer is now enabled\n"); } } static int wdt_set_timeout(int t) { if (t < 1 || t > SBC7240_MAX_TIMEOUT) { - printk(KERN_ERR SBC7240_PREFIX - "timeout value must be 1<=x<=%d\n", - SBC7240_MAX_TIMEOUT); + pr_err("timeout value must be 1<=x<=%d\n", SBC7240_MAX_TIMEOUT); return -1; } /* set the timeout */ outb_p((unsigned)t, SBC7240_SET_TIMEOUT_PORT); timeout = t; - printk(KERN_INFO SBC7240_PREFIX "timeout set to %d seconds\n", t); + pr_info("timeout set to %d seconds\n", t); return 0; } @@ -150,8 +145,7 @@ static int fop_close(struct inode *inode, struct file *file) || !nowayout) { wdt_disable(); } else { - printk(KERN_CRIT SBC7240_PREFIX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); wdt_keepalive(); } @@ -252,7 +246,7 @@ static struct notifier_block wdt_notifier = { static void __exit sbc7240_wdt_unload(void) { - printk(KERN_INFO SBC7240_PREFIX "Removing watchdog\n"); + pr_info("Removing watchdog\n"); misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); @@ -264,8 +258,7 @@ static int __init sbc7240_wdt_init(void) int rc = -EBUSY; if (!request_region(SBC7240_ENABLE_PORT, 1, "SBC7240 WDT")) { - printk(KERN_ERR SBC7240_PREFIX - "I/O address 0x%04x already in use\n", + pr_err("I/O address 0x%04x already in use\n", SBC7240_ENABLE_PORT); rc = -EIO; goto err_out; @@ -277,31 +270,27 @@ static int __init sbc7240_wdt_init(void) if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) { timeout = SBC7240_TIMEOUT; - printk(KERN_INFO SBC7240_PREFIX - "timeout value must be 1<=x<=%d, using %d\n", - SBC7240_MAX_TIMEOUT, timeout); + pr_info("timeout value must be 1<=x<=%d, using %d\n", + SBC7240_MAX_TIMEOUT, timeout); } wdt_set_timeout(timeout); wdt_disable(); rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR SBC7240_PREFIX - "cannot register reboot notifier (err=%d)\n", rc); + pr_err("cannot register reboot notifier (err=%d)\n", rc); goto err_out_region; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR SBC7240_PREFIX - "cannot register miscdev on minor=%d (err=%d)\n", + pr_err("cannot register miscdev on minor=%d (err=%d)\n", wdt_miscdev.minor, rc); goto err_out_reboot_notifier; } - printk(KERN_INFO SBC7240_PREFIX - "Watchdog driver for SBC7240 initialised (nowayout=%d)\n", - nowayout); + pr_info("Watchdog driver for SBC7240 initialised (nowayout=%d)\n", + nowayout); return 0; diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c index 514ec23..d4781e0 100644 --- a/drivers/watchdog/sbc8360.c +++ b/drivers/watchdog/sbc8360.c @@ -36,6 +36,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/miscdevice.h> @@ -51,13 +53,10 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> static unsigned long sbc8360_is_open; static char expect_close; -#define PFX "sbc8360: " - /* * * Watchdog Timer Configuration @@ -197,11 +196,11 @@ static int wd_times[64][2] = { static int timeout = 27; static int wd_margin = 0xB; static int wd_multiplier = 2; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -280,8 +279,7 @@ static int sbc8360_close(struct inode *inode, struct file *file) if (expect_close == 42) sbc8360_stop(); else - printk(KERN_CRIT PFX "SBC8360 device closed unexpectedly. " - "SBC8360 will not stop!\n"); + pr_crit("SBC8360 device closed unexpectedly. SBC8360 will not stop!\n"); clear_bit(0, &sbc8360_is_open); expect_close = 0; @@ -334,20 +332,19 @@ static int __init sbc8360_init(void) unsigned long int mseconds = 60000; if (timeout < 0 || timeout > 63) { - printk(KERN_ERR PFX "Invalid timeout index (must be 0-63).\n"); + pr_err("Invalid timeout index (must be 0-63)\n"); res = -EINVAL; goto out; } if (!request_region(SBC8360_ENABLE, 1, "SBC8360")) { - printk(KERN_ERR PFX "ENABLE method I/O %X is not available.\n", + pr_err("ENABLE method I/O %X is not available\n", SBC8360_ENABLE); res = -EIO; goto out; } if (!request_region(SBC8360_BASETIME, 1, "SBC8360")) { - printk(KERN_ERR PFX - "BASETIME method I/O %X is not available.\n", + pr_err("BASETIME method I/O %X is not available\n", SBC8360_BASETIME); res = -EIO; goto out_nobasetimereg; @@ -355,13 +352,13 @@ static int __init sbc8360_init(void) res = register_reboot_notifier(&sbc8360_notifier); if (res) { - printk(KERN_ERR PFX "Failed to register reboot notifier.\n"); + pr_err("Failed to register reboot notifier\n"); goto out_noreboot; } res = misc_register(&sbc8360_miscdev); if (res) { - printk(KERN_ERR PFX "failed to register misc device\n"); + pr_err("failed to register misc device\n"); goto out_nomisc; } @@ -378,7 +375,7 @@ static int __init sbc8360_init(void) mseconds = (wd_margin + 1) * 100000; /* My kingdom for the ability to print "0.5 seconds" in the kernel! */ - printk(KERN_INFO PFX "Timeout set at %ld ms.\n", mseconds); + pr_info("Timeout set at %ld ms\n", mseconds); return 0; diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index eaca366..0c3e9f6 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -13,6 +13,8 @@ * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -28,13 +30,12 @@ #include <linux/uaccess.h> #include <linux/io.h> -#define PFX "epx_c3: " static int epx_c3_alive; #define WATCHDOG_TIMEOUT 1 /* 1 sec default timeout */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -51,7 +52,7 @@ static void epx_c3_stop(void) outb(0, EPXC3_WATCHDOG_CTL_REG); - printk(KERN_INFO PFX "Stopped watchdog timer.\n"); + pr_info("Stopped watchdog timer\n"); } static void epx_c3_pet(void) @@ -75,7 +76,7 @@ static int epx_c3_open(struct inode *inode, struct file *file) epx_c3_pet(); epx_c3_alive = 1; - printk(KERN_INFO "Started watchdog timer.\n"); + pr_info("Started watchdog timer\n"); return nonseekable_open(inode, file); } @@ -173,9 +174,6 @@ static struct notifier_block epx_c3_notifier = { .notifier_call = epx_c3_notify_sys, }; -static const char banner[] __initconst = KERN_INFO PFX - "Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n"; - static int __init watchdog_init(void) { int ret; @@ -185,20 +183,19 @@ static int __init watchdog_init(void) ret = register_reboot_notifier(&epx_c3_notifier); if (ret) { - printk(KERN_ERR PFX "cannot register reboot notifier " - "(err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto out; } ret = misc_register(&epx_c3_miscdev); if (ret) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d " - "(err=%d)\n", WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); unregister_reboot_notifier(&epx_c3_notifier); goto out; } - printk(banner); + pr_info("Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n"); return 0; diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index d5d3994..90d5527 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -25,9 +25,8 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int margin = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; static DEFINE_MUTEX(wdt_lock); @@ -171,8 +170,7 @@ static int fitpc2_wdt_release(struct inode *inode, struct file *file) wdt_disable(); pr_info("Device disabled\n"); } else { - pr_warning("Device closed unexpectedly -" - " timer will not stop\n"); + pr_warn("Device closed unexpectedly - timer will not stop\n"); wdt_enable(); } @@ -222,8 +220,8 @@ static int __init fitpc2_wdt_init(void) } if (margin < 31 || margin > 255) { - pr_err("margin must be in range 31 - 255" - " seconds, you tried to set %d\n", margin); + pr_err("margin must be in range 31 - 255 seconds, you tried to set %d\n", + margin); err = -EINVAL; goto err_margin; } @@ -231,7 +229,7 @@ static int __init fitpc2_wdt_init(void) err = misc_register(&fitpc2_wdt_miscdev); if (err) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, err); + WATCHDOG_MINOR, err); goto err_margin; } @@ -261,7 +259,7 @@ MODULE_DESCRIPTION("SBC-FITPC2 Watchdog"); module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index c01daca..3fb83b0 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -31,6 +31,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/miscdevice.h> @@ -48,7 +50,6 @@ #define SC1200_MODULE_VER "build 20020303" #define SC1200_MODULE_NAME "sc1200wdt" -#define PFX SC1200_MODULE_NAME ": " #define MAX_TIMEOUT 255 /* 255 minutes */ #define PMIR (io) /* Power Management Index Register */ @@ -71,7 +72,6 @@ #define UART2_IRQ 0x04 /* Serial1 */ /* 5 -7 are reserved */ -static char banner[] __initdata = PFX SC1200_MODULE_VER; static int timeout = 1; static int io = -1; static int io_len = 2; /* for non plug and play */ @@ -93,8 +93,8 @@ MODULE_PARM_DESC(io, "io port"); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -176,7 +176,7 @@ static int sc1200wdt_open(struct inode *inode, struct file *file) timeout = MAX_TIMEOUT; sc1200wdt_start(); - printk(KERN_INFO PFX "Watchdog enabled, timeout = %d min(s)", timeout); + pr_info("Watchdog enabled, timeout = %d min(s)", timeout); return nonseekable_open(inode, file); } @@ -254,11 +254,10 @@ static int sc1200wdt_release(struct inode *inode, struct file *file) { if (expect_close == 42) { sc1200wdt_stop(); - printk(KERN_INFO PFX "Watchdog disabled\n"); + pr_info("Watchdog disabled\n"); } else { sc1200wdt_write_data(WDTO, timeout); - printk(KERN_CRIT PFX - "Unexpected close!, timeout = %d min(s)\n", timeout); + pr_crit("Unexpected close!, timeout = %d min(s)\n", timeout); } clear_bit(0, &open_flag); expect_close = 0; @@ -361,12 +360,11 @@ static int scl200wdt_pnp_probe(struct pnp_dev *dev, io_len = pnp_port_len(wdt_dev, 0); if (!request_region(io, io_len, SC1200_MODULE_NAME)) { - printk(KERN_ERR PFX "Unable to register IO port %#x\n", io); + pr_err("Unable to register IO port %#x\n", io); return -EBUSY; } - printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", - io, io_len); + pr_info("PnP device found at io port %#x/%d\n", io, io_len); return 0; } @@ -392,7 +390,7 @@ static int __init sc1200wdt_init(void) { int ret; - printk(KERN_INFO "%s\n", banner); + pr_info("%s\n", SC1200_MODULE_VER); #if defined CONFIG_PNP if (isapnp) { @@ -403,7 +401,7 @@ static int __init sc1200wdt_init(void) #endif if (io == -1) { - printk(KERN_ERR PFX "io parameter must be specified\n"); + pr_err("io parameter must be specified\n"); ret = -EINVAL; goto out_pnp; } @@ -416,7 +414,7 @@ static int __init sc1200wdt_init(void) #endif if (!request_region(io, io_len, SC1200_MODULE_NAME)) { - printk(KERN_ERR PFX "Unable to register IO port %#x\n", io); + pr_err("Unable to register IO port %#x\n", io); ret = -EBUSY; goto out_pnp; } @@ -427,16 +425,14 @@ static int __init sc1200wdt_init(void) ret = register_reboot_notifier(&sc1200wdt_notifier); if (ret) { - printk(KERN_ERR PFX - "Unable to register reboot notifier err = %d\n", ret); + pr_err("Unable to register reboot notifier err = %d\n", ret); goto out_io; } ret = misc_register(&sc1200wdt_miscdev); if (ret) { - printk(KERN_ERR PFX - "Unable to register miscdev on minor %d\n", - WATCHDOG_MINOR); + pr_err("Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); goto out_rbt; } diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index b284040..707e027 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -52,6 +52,8 @@ * This driver uses memory mapped IO, and spinlock. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -67,10 +69,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> - -#define OUR_NAME "sc520_wdt" -#define PFX OUR_NAME ": " /* * The AMD Elan SC520 timeout value is 492us times a power of 2 (0-7) @@ -98,8 +96,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1 <= timeout <= 3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -151,8 +149,7 @@ static void wdt_timer_ping(unsigned long data) /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); } else - printk(KERN_WARNING PFX - "Heartbeat lost! Will not ping the watchdog\n"); + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -187,7 +184,7 @@ static int wdt_startup(void) /* Start the watchdog */ wdt_config(WDT_ENB | WDT_WRST_ENB | WDT_EXP_SEL_04); - printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); + pr_info("Watchdog timer is now enabled\n"); return 0; } @@ -199,7 +196,7 @@ static int wdt_turnoff(void) /* Stop the watchdog */ wdt_config(0); - printk(KERN_INFO PFX "Watchdog timer is now disabled...\n"); + pr_info("Watchdog timer is now disabled...\n"); return 0; } @@ -270,8 +267,7 @@ static int fop_close(struct inode *inode, struct file *file) if (wdt_expect_close == 42) wdt_turnoff(); else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); wdt_keepalive(); } clear_bit(0, &wdt_is_open); @@ -393,36 +389,32 @@ static int __init sc520_wdt_init(void) if not reset to the default */ if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be 1 <= timeout <= 3600, using %d\n", - WATCHDOG_TIMEOUT); + pr_info("timeout value must be 1 <= timeout <= 3600, using %d\n", + WATCHDOG_TIMEOUT); } wdtmrctl = ioremap(MMCR_BASE + OFFS_WDTMRCTL, 2); if (!wdtmrctl) { - printk(KERN_ERR PFX "Unable to remap memory\n"); + pr_err("Unable to remap memory\n"); rc = -ENOMEM; goto err_out_region2; } rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", rc); + pr_err("cannot register reboot notifier (err=%d)\n", rc); goto err_out_ioremap; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, rc); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, rc); goto err_out_notifier; } - printk(KERN_INFO PFX - "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n", - timeout, nowayout); + pr_info("WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); return 0; diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c index 029467e..bd86f32 100644 --- a/drivers/watchdog/sch311x_wdt.c +++ b/drivers/watchdog/sch311x_wdt.c @@ -18,6 +18,8 @@ * Includes, defines, variables, module parameters, ... */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + /* Includes */ #include <linux/module.h> /* For module specific items */ #include <linux/moduleparam.h> /* For new moduleparam's */ @@ -37,7 +39,6 @@ /* Module and version information */ #define DRV_NAME "sch311x_wdt" -#define PFX DRV_NAME ": " /* Runtime registers */ #define RESGEN 0x1d @@ -79,8 +80,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=15300, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -323,8 +324,7 @@ static int sch311x_wdt_close(struct inode *inode, struct file *file) if (sch311x_wdt_expect_close == 42) { sch311x_wdt_stop(); } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); sch311x_wdt_keepalive(); } clear_bit(0, &sch311x_wdt_is_open); @@ -504,20 +504,19 @@ static int __init sch311x_detect(int sio_config_port, unsigned short *addr) /* Check if Logical Device Register is currently active */ if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0) - printk(KERN_INFO PFX "Seems that LDN 0x0a is not active...\n"); + pr_info("Seems that LDN 0x0a is not active...\n"); /* Get the base address of the runtime registers */ base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | sch311x_sio_inb(sio_config_port, 0x61); if (!base_addr) { - printk(KERN_ERR PFX "Base address not set.\n"); + pr_err("Base address not set\n"); err = -ENODEV; goto exit; } *addr = base_addr; - printk(KERN_INFO PFX "Found an SMSC SCH311%d chip at 0x%04x\n", - dev_id, base_addr); + pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr); exit: sch311x_sio_exit(sio_config_port); diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index e67b76c..8ae7c28 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -17,6 +17,8 @@ of any nature resulting due to the use of this software. This software is provided AS-IS with no warranties. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> @@ -30,7 +32,7 @@ #include <linux/uaccess.h> #include <linux/io.h> -#define NAME "scx200_wdt" +#define DEBUG MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); MODULE_DESCRIPTION("NatSemi SCx200 Watchdog Driver"); @@ -41,8 +43,8 @@ static int margin = 60; /* in seconds */ module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); static u16 wdto_restart; @@ -66,14 +68,13 @@ static void scx200_wdt_ping(void) static void scx200_wdt_update_margin(void) { - printk(KERN_INFO NAME ": timer margin %d seconds\n", margin); + pr_info("timer margin %d seconds\n", margin); wdto_restart = margin * W_SCALE; } static void scx200_wdt_enable(void) { - printk(KERN_DEBUG NAME ": enabling watchdog timer, wdto_restart = %d\n", - wdto_restart); + pr_debug("enabling watchdog timer, wdto_restart = %d\n", wdto_restart); spin_lock(&scx_lock); outw(0, scx200_cb_base + SCx200_WDT_WDTO); @@ -86,7 +87,7 @@ static void scx200_wdt_enable(void) static void scx200_wdt_disable(void) { - printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); + pr_debug("disabling watchdog timer\n"); spin_lock(&scx_lock); outw(0, scx200_cb_base + SCx200_WDT_WDTO); @@ -108,9 +109,7 @@ static int scx200_wdt_open(struct inode *inode, struct file *file) static int scx200_wdt_release(struct inode *inode, struct file *file) { if (expect_close != 42) - printk(KERN_WARNING NAME - ": watchdog device closed unexpectedly, " - "will not disable the watchdog timer\n"); + pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); else if (!nowayout) scx200_wdt_disable(); expect_close = 0; @@ -219,7 +218,7 @@ static int __init scx200_wdt_init(void) { int r; - printk(KERN_DEBUG NAME ": NatSemi SCx200 Watchdog Driver\n"); + pr_debug("NatSemi SCx200 Watchdog Driver\n"); /* check that we have found the configuration block */ if (!scx200_cb_present()) @@ -228,7 +227,7 @@ static int __init scx200_wdt_init(void) if (!request_region(scx200_cb_base + SCx200_WDT_OFFSET, SCx200_WDT_SIZE, "NatSemi SCx200 Watchdog")) { - printk(KERN_WARNING NAME ": watchdog I/O region busy\n"); + pr_warn("watchdog I/O region busy\n"); return -EBUSY; } @@ -237,7 +236,7 @@ static int __init scx200_wdt_init(void) r = register_reboot_notifier(&scx200_wdt_notifier); if (r) { - printk(KERN_ERR NAME ": unable to register reboot notifier"); + pr_err("unable to register reboot notifier\n"); release_region(scx200_cb_base + SCx200_WDT_OFFSET, SCx200_WDT_SIZE); return r; diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index a267dc0..93958a7 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -17,6 +17,9 @@ * Added expect close support, made emulated timeout runtime changeable * general cleanups, add some ioctls */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/platform_device.h> @@ -72,7 +75,7 @@ static DEFINE_SPINLOCK(shwdt_lock); #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned long next_heartbeat; struct sh_wdt { @@ -440,20 +443,20 @@ static int __init sh_wdt_init(void) clock_division_ratio > 0x7)) { clock_division_ratio = WTCSR_CKS_4096; - pr_info("%s: divisor must be 0x5<=x<=0x7, using %d\n", - DRV_NAME, clock_division_ratio); + pr_info("divisor must be 0x5<=x<=0x7, using %d\n", + clock_division_ratio); } rc = sh_wdt_set_heartbeat(heartbeat); if (unlikely(rc)) { heartbeat = WATCHDOG_HEARTBEAT; - pr_info("%s: heartbeat value must be 1<=x<=3600, using %d\n", - DRV_NAME, heartbeat); + pr_info("heartbeat value must be 1<=x<=3600, using %d\n", + heartbeat); } - pr_info("%s: configured with heartbeat=%d sec (nowayout=%d)\n", - DRV_NAME, heartbeat, nowayout); + pr_info("configured with heartbeat=%d sec (nowayout=%d)\n", + heartbeat, nowayout); return platform_driver_register(&sh_wdt_driver); } @@ -481,7 +484,7 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 97b8184..6d665f9 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -43,6 +43,8 @@ * Documentation/watchdog/wdt.txt */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -58,7 +60,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> /* enable support for minutes as units? */ /* (does not always work correctly, so disabled by default!) */ @@ -70,7 +71,6 @@ #define UNIT_SECOND 0 #define UNIT_MINUTE 1 -#define MODNAME "smsc37b787_wdt: " #define VERSION "1.1" #define IOPORT 0x3F0 @@ -85,7 +85,7 @@ static char expect_close; /* is the close expected? */ static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; /* -- Low level function ----------------------------------------*/ @@ -363,8 +363,7 @@ static int wb_smsc_wdt_open(struct inode *inode, struct file *file) /* Reload and activate timer */ wb_smsc_wdt_enable(); - printk(KERN_INFO MODNAME - "Watchdog enabled. Timeout set to %d %s.\n", + pr_info("Watchdog enabled. Timeout set to %d %s\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); return nonseekable_open(inode, file); @@ -378,11 +377,9 @@ static int wb_smsc_wdt_release(struct inode *inode, struct file *file) if (expect_close == 42) { wb_smsc_wdt_disable(); - printk(KERN_INFO MODNAME - "Watchdog disabled, sleeping again...\n"); + pr_info("Watchdog disabled, sleeping again...\n"); } else { - printk(KERN_CRIT MODNAME - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); wb_smsc_wdt_reset_timer(); } @@ -534,12 +531,11 @@ static int __init wb_smsc_wdt_init(void) { int ret; - printk(KERN_INFO "SMsC 37B787 watchdog component driver " - VERSION " initialising...\n"); + pr_info("SMsC 37B787 watchdog component driver " + VERSION " initialising...\n"); if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { - printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", - IOPORT); + pr_err("Unable to register IO port %#x\n", IOPORT); ret = -EBUSY; goto out_pnp; } @@ -553,25 +549,22 @@ static int __init wb_smsc_wdt_init(void) ret = register_reboot_notifier(&wb_smsc_wdt_notifier); if (ret) { - printk(KERN_ERR MODNAME - "Unable to register reboot notifier err = %d\n", ret); + pr_err("Unable to register reboot notifier err = %d\n", ret); goto out_io; } ret = misc_register(&wb_smsc_wdt_miscdev); if (ret) { - printk(KERN_ERR MODNAME - "Unable to register miscdev on minor %d\n", - WATCHDOG_MINOR); + pr_err("Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); goto out_rbt; } /* output info */ - printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", + pr_info("Timeout set to %d %s\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); - printk(KERN_INFO MODNAME - "Watchdog initialized and sleeping (nowayout=%d)...\n", - nowayout); + pr_info("Watchdog initialized and sleeping (nowayout=%d)...\n", + nowayout); out_clean: return ret; @@ -592,14 +585,14 @@ static void __exit wb_smsc_wdt_exit(void) /* Stop the timer before we leave */ if (!nowayout) { wb_smsc_wdt_shutdown(); - printk(KERN_INFO MODNAME "Watchdog disabled.\n"); + pr_info("Watchdog disabled\n"); } misc_deregister(&wb_smsc_wdt_miscdev); unregister_reboot_notifier(&wb_smsc_wdt_notifier); release_region(IOPORT, IOPORT_SIZE); - printk(KERN_INFO "SMsC 37B787 watchdog component driver removed.\n"); + pr_info("SMsC 37B787 watchdog component driver removed\n"); } module_init(wb_smsc_wdt_init); @@ -621,7 +614,7 @@ MODULE_PARM_DESC(unit, module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index bf16ffb..fe83beb 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -1,5 +1,5 @@ /* - * SoftDog 0.07: A Software Watchdog Device + * SoftDog: A Software Watchdog Device * * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, * All Rights Reserved. @@ -36,45 +36,37 @@ * Added Matt Domsch's nowayout module option. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> #include <linux/timer.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> -#include <linux/fs.h> #include <linux/notifier.h> #include <linux/reboot.h> #include <linux/init.h> #include <linux/jiffies.h> -#include <linux/uaccess.h> #include <linux/kernel.h> -#define PFX "SoftDog: " - #define TIMER_MARGIN 60 /* Default is 60 seconds */ -static int soft_margin = TIMER_MARGIN; /* in seconds */ -module_param(soft_margin, int, 0); +static unsigned int soft_margin = TIMER_MARGIN; /* in seconds */ +module_param(soft_margin, uint, 0); MODULE_PARM_DESC(soft_margin, "Watchdog soft_margin in seconds. (0 < soft_margin < 65536, default=" __MODULE_STRING(TIMER_MARGIN) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -#ifdef ONLY_TESTING -static int soft_noboot = 1; -#else static int soft_noboot = 0; -#endif /* ONLY_TESTING */ - module_param(soft_noboot, int, 0); MODULE_PARM_DESC(soft_noboot, - "Softdog action, set to 1 to ignore reboots, 0 to reboot " - "(default depends on ONLY_TESTING)"); + "Softdog action, set to 1 to ignore reboots, 0 to reboot (default=0)"); static int soft_panic; module_param(soft_panic, int, 0); @@ -89,9 +81,6 @@ static void watchdog_fire(unsigned long); static struct timer_list watchdog_ticktock = TIMER_INITIALIZER(watchdog_fire, 0, 0); -static unsigned long driver_open, orphan_timer; -static char expect_close; - /* * If the timer expires.. @@ -99,18 +88,15 @@ static char expect_close; static void watchdog_fire(unsigned long data) { - if (test_and_clear_bit(0, &orphan_timer)) - module_put(THIS_MODULE); - if (soft_noboot) - printk(KERN_CRIT PFX "Triggered - Reboot ignored.\n"); + pr_crit("Triggered - Reboot ignored\n"); else if (soft_panic) { - printk(KERN_CRIT PFX "Initiating panic.\n"); - panic("Software Watchdog Timer expired."); + pr_crit("Initiating panic\n"); + panic("Software Watchdog Timer expired"); } else { - printk(KERN_CRIT PFX "Initiating system reboot.\n"); + pr_crit("Initiating system reboot\n"); emergency_restart(); - printk(KERN_CRIT PFX "Reboot didn't ?????\n"); + pr_crit("Reboot didn't ?????\n"); } } @@ -118,127 +104,24 @@ static void watchdog_fire(unsigned long data) * Softdog operations */ -static int softdog_keepalive(void) +static int softdog_ping(struct watchdog_device *w) { - mod_timer(&watchdog_ticktock, jiffies+(soft_margin*HZ)); + mod_timer(&watchdog_ticktock, jiffies+(w->timeout*HZ)); return 0; } -static int softdog_stop(void) +static int softdog_stop(struct watchdog_device *w) { del_timer(&watchdog_ticktock); return 0; } -static int softdog_set_heartbeat(int t) -{ - if ((t < 0x0001) || (t > 0xFFFF)) - return -EINVAL; - - soft_margin = t; - return 0; -} - -/* - * /dev/watchdog handling - */ - -static int softdog_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &driver_open)) - return -EBUSY; - if (!test_and_clear_bit(0, &orphan_timer)) - __module_get(THIS_MODULE); - /* - * Activate timer - */ - softdog_keepalive(); - return nonseekable_open(inode, file); -} - -static int softdog_release(struct inode *inode, struct file *file) +static int softdog_set_timeout(struct watchdog_device *w, unsigned int t) { - /* - * Shut off the timer. - * Lock it in if it's a module and we set nowayout - */ - if (expect_close == 42) { - softdog_stop(); - module_put(THIS_MODULE); - } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); - set_bit(0, &orphan_timer); - softdog_keepalive(); - } - clear_bit(0, &driver_open); - expect_close = 0; + w->timeout = t; return 0; } -static ssize_t softdog_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) -{ - /* - * Refresh the timer. - */ - if (len) { - if (!nowayout) { - size_t i; - - /* In case it was set long ago */ - expect_close = 0; - - for (i = 0; i != len; i++) { - char c; - - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - expect_close = 42; - } - } - softdog_keepalive(); - } - return len; -} - -static long softdog_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int __user *p = argp; - int new_margin; - static const struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | - WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE, - .firmware_version = 0, - .identity = "Software Watchdog", - }; - switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - softdog_keepalive(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - if (softdog_set_heartbeat(new_margin)) - return -EINVAL; - softdog_keepalive(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(soft_margin, p); - default: - return -ENOTTY; - } -} - /* * Notifier for system down */ @@ -248,7 +131,7 @@ static int softdog_notify_sys(struct notifier_block *this, unsigned long code, { if (code == SYS_DOWN || code == SYS_HALT) /* Turn the WDT off */ - softdog_stop(); + softdog_stop(NULL); return NOTIFY_DONE; } @@ -256,28 +139,29 @@ static int softdog_notify_sys(struct notifier_block *this, unsigned long code, * Kernel Interfaces */ -static const struct file_operations softdog_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = softdog_write, - .unlocked_ioctl = softdog_ioctl, - .open = softdog_open, - .release = softdog_release, +static struct notifier_block softdog_notifier = { + .notifier_call = softdog_notify_sys, }; -static struct miscdevice softdog_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &softdog_fops, +static struct watchdog_info softdog_info = { + .identity = "Software Watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, }; -static struct notifier_block softdog_notifier = { - .notifier_call = softdog_notify_sys, +static struct watchdog_ops softdog_ops = { + .owner = THIS_MODULE, + .start = softdog_ping, + .stop = softdog_stop, + .ping = softdog_ping, + .set_timeout = softdog_set_timeout, }; -static char banner[] __initdata = KERN_INFO "Software Watchdog Timer: 0.07 " - "initialized. soft_noboot=%d soft_margin=%d sec soft_panic=%d " - "(nowayout= %d)\n"; +static struct watchdog_device softdog_dev = { + .info = &softdog_info, + .ops = &softdog_ops, + .min_timeout = 1, + .max_timeout = 0xFFFF +}; static int __init watchdog_init(void) { @@ -285,37 +169,36 @@ static int __init watchdog_init(void) /* Check that the soft_margin value is within it's range; if not reset to the default */ - if (softdog_set_heartbeat(soft_margin)) { - softdog_set_heartbeat(TIMER_MARGIN); - printk(KERN_INFO PFX - "soft_margin must be 0 < soft_margin < 65536, using %d\n", + if (soft_margin < 1 || soft_margin > 65535) { + pr_info("soft_margin must be 0 < soft_margin < 65536, using %d\n", TIMER_MARGIN); + return -EINVAL; } + softdog_dev.timeout = soft_margin; + + watchdog_set_nowayout(&softdog_dev, nowayout); ret = register_reboot_notifier(&softdog_notifier); if (ret) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); return ret; } - ret = misc_register(&softdog_miscdev); + ret = watchdog_register_device(&softdog_dev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); unregister_reboot_notifier(&softdog_notifier); return ret; } - printk(banner, soft_noboot, soft_margin, soft_panic, nowayout); + pr_info("Software Watchdog Timer: 0.08 initialized. soft_noboot=%d soft_margin=%d sec soft_panic=%d (nowayout=%d)\n", + soft_noboot, soft_margin, soft_panic, nowayout); return 0; } static void __exit watchdog_exit(void) { - misc_deregister(&softdog_miscdev); + watchdog_unregister_device(&softdog_dev); unregister_reboot_notifier(&softdog_notifier); } diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c index 87e0527..59108e4 100644 --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -20,6 +20,8 @@ * Includes, defines, variables, module parameters, ... */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -39,7 +41,6 @@ #define TCO_VERSION "0.01" #define TCO_MODULE_NAME "SP5100 TCO timer" #define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION -#define PFX TCO_MODULE_NAME ": " /* internal variables */ static u32 tcobase_phys; @@ -61,8 +62,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started" " (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -143,8 +144,7 @@ static int sp5100_tco_release(struct inode *inode, struct file *file) if (tco_expect_close == 42) { tco_timer_stop(); } else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); tco_timer_keepalive(); } clear_bit(0, &timer_alive); @@ -290,8 +290,7 @@ static unsigned char __devinit sp5100_tco_setupdevice(void) /* Request the IO ports used by this driver */ pm_iobase = SP5100_IO_PM_INDEX_REG; if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, "SP5100 TCO")) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - pm_iobase); + pr_err("I/O address 0x%04x already in use\n", pm_iobase); goto exit; } @@ -308,15 +307,14 @@ static unsigned char __devinit sp5100_tco_setupdevice(void) if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE, "SP5100 TCO")) { - printk(KERN_ERR PFX "mmio address 0x%04x already in use\n", - val); + pr_err("mmio address 0x%04x already in use\n", val); goto unreg_region; } tcobase_phys = val; tcobase = ioremap(val, SP5100_WDT_MEM_MAP_SIZE); if (tcobase == 0) { - printk(KERN_ERR PFX "failed to get tcobase address\n"); + pr_err("failed to get tcobase address\n"); goto unreg_mem_region; } @@ -375,9 +373,9 @@ static int __devinit sp5100_tco_init(struct platform_device *dev) return -ENODEV; /* Check to see if last reboot was due to watchdog timeout */ - printk(KERN_INFO PFX "Watchdog reboot %sdetected.\n", - readl(SP5100_WDT_CONTROL(tcobase)) & SP5100_PM_WATCHDOG_FIRED ? - "" : "not "); + pr_info("Watchdog reboot %sdetected\n", + readl(SP5100_WDT_CONTROL(tcobase)) & SP5100_PM_WATCHDOG_FIRED ? + "" : "not "); /* Clear out the old status */ val = readl(SP5100_WDT_CONTROL(tcobase)); @@ -395,16 +393,14 @@ static int __devinit sp5100_tco_init(struct platform_device *dev) ret = misc_register(&sp5100_tco_miscdev); if (ret != 0) { - printk(KERN_ERR PFX "cannot register miscdev on minor=" - "%d (err=%d)\n", + pr_err("cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); goto exit; } clear_bit(0, &timer_alive); - printk(KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec" - " (nowayout=%d)\n", + pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n", tcobase, heartbeat, nowayout); return 0; @@ -455,8 +451,7 @@ static int __init sp5100_tco_init_module(void) { int err; - printk(KERN_INFO PFX "SP5100 TCO WatchDog Timer Driver v%s\n", - TCO_VERSION); + pr_info("SP5100 TCO WatchDog Timer Driver v%s\n", TCO_VERSION); err = platform_driver_register(&sp5100_tco_driver); if (err) @@ -480,7 +475,7 @@ static void __exit sp5100_tco_cleanup_module(void) { platform_device_unregister(sp5100_tco_platform_device); platform_driver_unregister(&sp5100_tco_driver); - printk(KERN_INFO PFX "SP5100 TCO Watchdog Module Unloaded.\n"); + pr_info("SP5100 TCO Watchdog Module Unloaded\n"); } module_init(sp5100_tco_init_module); diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c index 3ff9e47..bbb170e 100644 --- a/drivers/watchdog/sp805_wdt.c +++ b/drivers/watchdog/sp805_wdt.c @@ -25,6 +25,7 @@ #include <linux/miscdevice.h> #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/pm.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/types.h> @@ -55,14 +56,13 @@ /** * struct sp805_wdt: sp805 wdt device structure - * - * lock: spin lock protecting dev structure and io access - * base: base address of wdt - * clk: clock structure of wdt - * dev: amba device structure of wdt - * status: current status of wdt - * load_val: load value to be set for current timeout - * timeout: current programmed timeout + * @lock: spin lock protecting dev structure and io access + * @base: base address of wdt + * @clk: clock structure of wdt + * @adev: amba device structure of wdt + * @status: current status of wdt + * @load_val: load value to be set for current timeout + * @timeout: current programmed timeout */ struct sp805_wdt { spinlock_t lock; @@ -78,7 +78,7 @@ struct sp805_wdt { /* local variables */ static struct sp805_wdt *wdt; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; /* This routine finds load value that will reset system in required timout */ static void wdt_setload(unsigned int timeout) @@ -113,10 +113,10 @@ static u32 wdt_timeleft(void) rate = clk_get_rate(wdt->clk); spin_lock(&wdt->lock); - load = readl(wdt->base + WDTVALUE); + load = readl_relaxed(wdt->base + WDTVALUE); /*If the interrupt is inactive then time left is WDTValue + WDTLoad. */ - if (!(readl(wdt->base + WDTRIS) & INT_MASK)) + if (!(readl_relaxed(wdt->base + WDTRIS) & INT_MASK)) load += wdt->load_val + 1; spin_unlock(&wdt->lock); @@ -128,14 +128,14 @@ static void wdt_enable(void) { spin_lock(&wdt->lock); - writel(UNLOCK, wdt->base + WDTLOCK); - writel(wdt->load_val, wdt->base + WDTLOAD); - writel(INT_MASK, wdt->base + WDTINTCLR); - writel(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL); - writel(LOCK, wdt->base + WDTLOCK); + writel_relaxed(UNLOCK, wdt->base + WDTLOCK); + writel_relaxed(wdt->load_val, wdt->base + WDTLOAD); + writel_relaxed(INT_MASK, wdt->base + WDTINTCLR); + writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL); + writel_relaxed(LOCK, wdt->base + WDTLOCK); /* Flush posted writes. */ - readl(wdt->base + WDTLOCK); + readl_relaxed(wdt->base + WDTLOCK); spin_unlock(&wdt->lock); } @@ -144,12 +144,12 @@ static void wdt_disable(void) { spin_lock(&wdt->lock); - writel(UNLOCK, wdt->base + WDTLOCK); - writel(0, wdt->base + WDTCONTROL); - writel(LOCK, wdt->base + WDTLOCK); + writel_relaxed(UNLOCK, wdt->base + WDTLOCK); + writel_relaxed(0, wdt->base + WDTCONTROL); + writel_relaxed(LOCK, wdt->base + WDTLOCK); /* Flush posted writes. */ - readl(wdt->base + WDTLOCK); + readl_relaxed(wdt->base + WDTLOCK); spin_unlock(&wdt->lock); } @@ -285,32 +285,33 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; - if (!request_mem_region(adev->res.start, resource_size(&adev->res), - "sp805_wdt")) { + if (!devm_request_mem_region(&adev->dev, adev->res.start, + resource_size(&adev->res), "sp805_wdt")) { dev_warn(&adev->dev, "Failed to get memory region resource\n"); ret = -ENOENT; goto err; } - wdt = kzalloc(sizeof(*wdt), GFP_KERNEL); + wdt = devm_kzalloc(&adev->dev, sizeof(*wdt), GFP_KERNEL); if (!wdt) { dev_warn(&adev->dev, "Kzalloc failed\n"); ret = -ENOMEM; - goto err_kzalloc; + goto err; + } + + wdt->base = devm_ioremap(&adev->dev, adev->res.start, + resource_size(&adev->res)); + if (!wdt->base) { + ret = -ENOMEM; + dev_warn(&adev->dev, "ioremap fail\n"); + goto err; } wdt->clk = clk_get(&adev->dev, NULL); if (IS_ERR(wdt->clk)) { dev_warn(&adev->dev, "Clock not found\n"); ret = PTR_ERR(wdt->clk); - goto err_clk_get; - } - - wdt->base = ioremap(adev->res.start, resource_size(&adev->res)); - if (!wdt->base) { - ret = -ENOMEM; - dev_warn(&adev->dev, "ioremap fail\n"); - goto err_ioremap; + goto err; } wdt->adev = adev; @@ -327,14 +328,7 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id) return 0; err_misc_register: - iounmap(wdt->base); -err_ioremap: clk_put(wdt->clk); -err_clk_get: - kfree(wdt); - wdt = NULL; -err_kzalloc: - release_mem_region(adev->res.start, resource_size(&adev->res)); err: dev_err(&adev->dev, "Probe Failed!!!\n"); return ret; @@ -343,14 +337,42 @@ err: static int __devexit sp805_wdt_remove(struct amba_device *adev) { misc_deregister(&sp805_wdt_miscdev); - iounmap(wdt->base); clk_put(wdt->clk); - kfree(wdt); - release_mem_region(adev->res.start, resource_size(&adev->res)); return 0; } +#ifdef CONFIG_PM +static int sp805_wdt_suspend(struct device *dev) +{ + if (test_bit(WDT_BUSY, &wdt->status)) { + wdt_disable(); + clk_disable(wdt->clk); + } + + return 0; +} + +static int sp805_wdt_resume(struct device *dev) +{ + int ret = 0; + + if (test_bit(WDT_BUSY, &wdt->status)) { + ret = clk_enable(wdt->clk); + if (ret) { + dev_err(dev, "clock enable fail"); + return ret; + } + wdt_enable(); + } + + return ret; +} +#endif /* CONFIG_PM */ + +static SIMPLE_DEV_PM_OPS(sp805_wdt_dev_pm_ops, sp805_wdt_suspend, + sp805_wdt_resume); + static struct amba_id sp805_wdt_ids[] = { { .id = 0x00141805, @@ -364,6 +386,7 @@ MODULE_DEVICE_TABLE(amba, sp805_wdt_ids); static struct amba_driver sp805_wdt_driver = { .drv = { .name = MODULE_NAME, + .pm = &sp805_wdt_dev_pm_ops, }, .id_table = sp805_wdt_ids, .probe = sp805_wdt_probe, @@ -372,7 +395,7 @@ static struct amba_driver sp805_wdt_driver = { module_amba_driver(sp805_wdt_driver); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Set to 1 to keep watchdog running after device release"); diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c index e37d811..21d96b9 100644 --- a/drivers/watchdog/stmp3xxx_wdt.c +++ b/drivers/watchdog/stmp3xxx_wdt.c @@ -6,6 +6,9 @@ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/kernel.h> #include <linux/fs.h> @@ -32,7 +35,7 @@ static DEFINE_SPINLOCK(stmp3xxx_wdt_io_lock); static unsigned long wdt_status; -static const int nowayout = WATCHDOG_NOWAYOUT; +static const bool nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = DEFAULT_HEARTBEAT; static unsigned long boot_status; @@ -221,8 +224,7 @@ static int __devinit stmp3xxx_wdt_probe(struct platform_device *pdev) return ret; } - printk(KERN_INFO "stmp3xxx watchdog: initialized, heartbeat %d sec\n", - heartbeat); + pr_info("initialized, heartbeat %d sec\n", heartbeat); return ret; } diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c index 1490293..8df050d 100644 --- a/drivers/watchdog/ts72xx_wdt.c +++ b/drivers/watchdog/ts72xx_wdt.c @@ -34,8 +34,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. " __MODULE_STRING(TS72XX_WDT_DEFAULT_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); /** diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c index 0764c62..249f113 100644 --- a/drivers/watchdog/twl4030_wdt.c +++ b/drivers/watchdog/twl4030_wdt.c @@ -42,8 +42,8 @@ struct twl4030_wdt { unsigned long state; }; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 9e9ed7b..98e1637 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -7,177 +7,99 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> -#include <linux/fs.h> #include <linux/init.h> -#include <linux/uaccess.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> #include <asm/txx9tmr.h> +#define WD_TIMER_CCD 7 /* 1/256 */ +#define WD_TIMER_CLK (clk_get_rate(txx9_imclk) / (2 << WD_TIMER_CCD)) +#define WD_MAX_TIMEOUT ((0xffffffff >> (32 - TXX9_TIMER_BITS)) / WD_TIMER_CLK) #define TIMER_MARGIN 60 /* Default is 60 seconds */ -static int timeout = TIMER_MARGIN; /* in seconds */ -module_param(timeout, int, 0); +static unsigned int timeout = TIMER_MARGIN; /* in seconds */ +module_param(timeout, uint, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. " "(0<timeout<((2^" __MODULE_STRING(TXX9_TIMER_BITS) ")/(IMCLK/256)), " "default=" __MODULE_STRING(TIMER_MARGIN) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -#define WD_TIMER_CCD 7 /* 1/256 */ -#define WD_TIMER_CLK (clk_get_rate(txx9_imclk) / (2 << WD_TIMER_CCD)) -#define WD_MAX_TIMEOUT ((0xffffffff >> (32 - TXX9_TIMER_BITS)) / WD_TIMER_CLK) - -static unsigned long txx9wdt_alive; -static int expect_close; static struct txx9_tmr_reg __iomem *txx9wdt_reg; static struct clk *txx9_imclk; static DEFINE_SPINLOCK(txx9_lock); -static void txx9wdt_ping(void) +static int txx9wdt_ping(struct watchdog_device *wdt_dev) { spin_lock(&txx9_lock); __raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr); spin_unlock(&txx9_lock); + return 0; } -static void txx9wdt_start(void) +static int txx9wdt_start(struct watchdog_device *wdt_dev) { spin_lock(&txx9_lock); - __raw_writel(WD_TIMER_CLK * timeout, &txx9wdt_reg->cpra); + __raw_writel(WD_TIMER_CLK * wdt_dev->timeout, &txx9wdt_reg->cpra); __raw_writel(WD_TIMER_CCD, &txx9wdt_reg->ccdr); __raw_writel(0, &txx9wdt_reg->tisr); /* clear pending interrupt */ __raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG, &txx9wdt_reg->tcr); __raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr); spin_unlock(&txx9_lock); + return 0; } -static void txx9wdt_stop(void) +static int txx9wdt_stop(struct watchdog_device *wdt_dev) { spin_lock(&txx9_lock); __raw_writel(TXx9_TMWTMR_WDIS, &txx9wdt_reg->wtmr); __raw_writel(__raw_readl(&txx9wdt_reg->tcr) & ~TXx9_TMTCR_TCE, &txx9wdt_reg->tcr); spin_unlock(&txx9_lock); -} - -static int txx9wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &txx9wdt_alive)) - return -EBUSY; - - if (__raw_readl(&txx9wdt_reg->tcr) & TXx9_TMTCR_TCE) { - clear_bit(0, &txx9wdt_alive); - return -EBUSY; - } - - if (nowayout) - __module_get(THIS_MODULE); - - txx9wdt_start(); - return nonseekable_open(inode, file); -} - -static int txx9wdt_release(struct inode *inode, struct file *file) -{ - if (expect_close) - txx9wdt_stop(); - else { - printk(KERN_CRIT "txx9wdt: " - "Unexpected close, not stopping watchdog!\n"); - txx9wdt_ping(); - } - clear_bit(0, &txx9wdt_alive); - expect_close = 0; return 0; } -static ssize_t txx9wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) +static int txx9wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int new_timeout) { - if (len) { - if (!nowayout) { - size_t i; - - expect_close = 0; - for (i = 0; i != len; i++) { - char c; - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - expect_close = 1; - } - } - txx9wdt_ping(); - } - return len; + wdt_dev->timeout = new_timeout; + txx9wdt_stop(wdt_dev); + txx9wdt_start(wdt_dev); + return 0; } -static long txx9wdt_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int __user *p = argp; - int new_timeout; - static const struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | - WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE, - .firmware_version = 0, - .identity = "Hardware Watchdog for TXx9", - }; - - switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - txx9wdt_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (new_timeout < 1 || new_timeout > WD_MAX_TIMEOUT) - return -EINVAL; - timeout = new_timeout; - txx9wdt_stop(); - txx9wdt_start(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - default: - return -ENOTTY; - } -} +static const struct watchdog_info txx9wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "Hardware Watchdog for TXx9", +}; -static const struct file_operations txx9wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = txx9wdt_write, - .unlocked_ioctl = txx9wdt_ioctl, - .open = txx9wdt_open, - .release = txx9wdt_release, +static const struct watchdog_ops txx9wdt_ops = { + .owner = THIS_MODULE, + .start = txx9wdt_start, + .stop = txx9wdt_stop, + .ping = txx9wdt_ping, + .set_timeout = txx9wdt_set_timeout, }; -static struct miscdevice txx9wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &txx9wdt_fops, +static struct watchdog_device txx9wdt = { + .info = &txx9wdt_info, + .ops = &txx9wdt_ops, }; static int __init txx9wdt_probe(struct platform_device *dev) @@ -199,27 +121,27 @@ static int __init txx9wdt_probe(struct platform_device *dev) } res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - goto exit_busy; - if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res), - "txx9wdt")) - goto exit_busy; - txx9wdt_reg = devm_ioremap(&dev->dev, res->start, resource_size(res)); - if (!txx9wdt_reg) - goto exit_busy; - - ret = misc_register(&txx9wdt_miscdev); - if (ret) { + txx9wdt_reg = devm_request_and_ioremap(&dev->dev, res); + if (!txx9wdt_reg) { + ret = -EBUSY; goto exit; } - printk(KERN_INFO "Hardware Watchdog Timer for TXx9: " - "timeout=%d sec (max %ld) (nowayout= %d)\n", - timeout, WD_MAX_TIMEOUT, nowayout); + if (timeout < 1 || timeout > WD_MAX_TIMEOUT) + timeout = TIMER_MARGIN; + txx9wdt.timeout = timeout; + txx9wdt.min_timeout = 1; + txx9wdt.max_timeout = WD_MAX_TIMEOUT; + watchdog_set_nowayout(&txx9wdt, nowayout); + + ret = watchdog_register_device(&txx9wdt); + if (ret) + goto exit; + + pr_info("Hardware Watchdog Timer: timeout=%d sec (max %ld) (nowayout= %d)\n", + timeout, WD_MAX_TIMEOUT, nowayout); return 0; -exit_busy: - ret = -EBUSY; exit: if (txx9_imclk) { clk_disable(txx9_imclk); @@ -230,7 +152,7 @@ exit: static int __exit txx9wdt_remove(struct platform_device *dev) { - misc_deregister(&txx9wdt_miscdev); + watchdog_unregister_device(&txx9wdt); clk_disable(txx9_imclk); clk_put(txx9_imclk); return 0; @@ -238,7 +160,7 @@ static int __exit txx9wdt_remove(struct platform_device *dev) static void txx9wdt_shutdown(struct platform_device *dev) { - txx9wdt_stop(); + txx9wdt_stop(&txx9wdt); } static struct platform_driver txx9wdt_driver = { diff --git a/drivers/watchdog/via_wdt.c b/drivers/watchdog/via_wdt.c index 8f07dd4..465e082 100644 --- a/drivers/watchdog/via_wdt.c +++ b/drivers/watchdog/via_wdt.c @@ -10,6 +10,9 @@ * Caveat: PnP must be enabled in BIOS to allow full access to watchdog * control registers. If not, the watchdog must be configured in BIOS manually. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/device.h> #include <linux/io.h> #include <linux/jiffies.h> @@ -55,8 +58,8 @@ module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, between 1 and 1023 " "(default = " __MODULE_STRING(WDT_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default = " __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -98,7 +101,7 @@ static void wdt_timer_tick(unsigned long data) static int wdt_ping(struct watchdog_device *wdd) { /* calculate when the next userspace timeout will be */ - next_heartbeat = jiffies + timeout * HZ; + next_heartbeat = jiffies + wdd->timeout * HZ; return 0; } @@ -106,7 +109,7 @@ static int wdt_start(struct watchdog_device *wdd) { unsigned int ctl = readl(wdt_mem); - writel(timeout, wdt_mem + VIA_WDT_COUNT); + writel(wdd->timeout, wdt_mem + VIA_WDT_COUNT); writel(ctl | VIA_WDT_RUNNING | VIA_WDT_TRIGGER, wdt_mem); wdt_ping(wdd); mod_timer(&timer, jiffies + WDT_HEARTBEAT); @@ -125,7 +128,7 @@ static int wdt_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout) { writel(new_timeout, wdt_mem + VIA_WDT_COUNT); - timeout = new_timeout; + wdd->timeout = new_timeout; return 0; } diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 576a388..92f1326 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -26,6 +26,8 @@ * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -40,10 +42,8 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT" -#define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ static unsigned long wdt_is_open; @@ -61,8 +61,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -119,9 +119,8 @@ static void w83627hf_init(void) outb_p(0xF6, WDT_EFER); /* Select CRF6 */ t = inb_p(WDT_EFDR); /* read CRF6 */ if (t != 0) { - printk(KERN_INFO PFX - "Watchdog already running. Resetting timeout to %d sec\n", - timeout); + pr_info("Watchdog already running. Resetting timeout to %d sec\n", + timeout); outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */ } @@ -290,8 +289,7 @@ static int wdt_close(struct inode *inode, struct file *file) if (expect_close == 42) wdt_disable(); else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); wdt_ping(); } expect_close = 0; @@ -344,18 +342,16 @@ static int __init wdt_init(void) { int ret; - printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising.\n"); + pr_info("WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising\n"); if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be 1 <= timeout <= 255, using %d\n", - WATCHDOG_TIMEOUT); + pr_info("timeout value must be 1 <= timeout <= 255, using %d\n", + WATCHDOG_TIMEOUT); } if (!request_region(wdt_io, 1, WATCHDOG_NAME)) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_io); + pr_err("I/O address 0x%04x already in use\n", wdt_io); ret = -EIO; goto out; } @@ -364,22 +360,19 @@ static int __init wdt_init(void) ret = register_reboot_notifier(&wdt_notifier); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto unreg_regions; } ret = misc_register(&wdt_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_reboot; } - printk(KERN_INFO PFX - "initialized. timeout=%d sec (nowayout=%d)\n", - timeout, nowayout); + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); out: return ret; diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index af08972..cd9f3c1 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -25,6 +25,8 @@ * "AS-IS" and at no charge. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -39,10 +41,8 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #define WATCHDOG_NAME "w83697hf/hg WDT" -#define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ #define WATCHDOG_EARLY_DISABLE 1 /* Disable until userland kicks in */ @@ -62,8 +62,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -309,8 +309,7 @@ static int wdt_close(struct inode *inode, struct file *file) if (expect_close == 42) wdt_disable(); else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); wdt_ping(); } expect_close = 0; @@ -362,24 +361,21 @@ static struct notifier_block wdt_notifier = { static int w83697hf_check_wdt(void) { if (!request_region(wdt_io, 2, WATCHDOG_NAME)) { - printk(KERN_ERR PFX - "I/O address 0x%x already in use\n", wdt_io); + pr_err("I/O address 0x%x already in use\n", wdt_io); return -EIO; } - printk(KERN_DEBUG PFX - "Looking for watchdog at address 0x%x\n", wdt_io); + pr_debug("Looking for watchdog at address 0x%x\n", wdt_io); w83697hf_unlock(); if (w83697hf_get_reg(0x20) == 0x60) { - printk(KERN_INFO PFX - "watchdog found at address 0x%x\n", wdt_io); + pr_info("watchdog found at address 0x%x\n", wdt_io); w83697hf_lock(); return 0; } /* Reprotect in case it was a compatible device */ w83697hf_lock(); - printk(KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io); + pr_info("watchdog not found at address 0x%x\n", wdt_io); release_region(wdt_io, 2); return -EIO; } @@ -390,7 +386,7 @@ static int __init wdt_init(void) { int ret, i, found = 0; - printk(KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); + pr_info("WDT driver for W83697HF/HG initializing\n"); if (wdt_io == 0) { /* we will autodetect the W83697HF/HG watchdog */ @@ -405,7 +401,7 @@ static int __init wdt_init(void) } if (!found) { - printk(KERN_ERR PFX "No W83697HF/HG could be found\n"); + pr_err("No W83697HF/HG could be found\n"); ret = -EIO; goto out; } @@ -413,34 +409,30 @@ static int __init wdt_init(void) w83697hf_init(); if (early_disable) { if (wdt_running()) - printk(KERN_WARNING PFX "Stopping previously enabled " - "watchdog until userland kicks in\n"); + pr_warn("Stopping previously enabled watchdog until userland kicks in\n"); wdt_disable(); } if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be 1 <= timeout <= 255, using %d\n", - WATCHDOG_TIMEOUT); + pr_info("timeout value must be 1 <= timeout <= 255, using %d\n", + WATCHDOG_TIMEOUT); } ret = register_reboot_notifier(&wdt_notifier); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto unreg_regions; } ret = misc_register(&wdt_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_reboot; } - printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); out: diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c index be9c4d8..274be0b 100644 --- a/drivers/watchdog/w83697ug_wdt.c +++ b/drivers/watchdog/w83697ug_wdt.c @@ -30,6 +30,8 @@ * (c) Copyright 1995 Alan Cox <alan@redhat.com> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -44,10 +46,8 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #define WATCHDOG_NAME "w83697ug/uf WDT" -#define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ static unsigned long wdt_is_open; @@ -64,8 +64,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -91,8 +91,8 @@ static int w83697ug_select_wd_register(void) version = inb(WDT_EFDR); if (version == 0x68) { /* W83697UG */ - printk(KERN_INFO PFX "Watchdog chip version 0x%02x = " - "W83697UG/UF found at 0x%04x\n", version, wdt_io); + pr_info("Watchdog chip version 0x%02x = W83697UG/UF found at 0x%04x\n", + version, wdt_io); outb_p(0x2b, WDT_EFER); c = inb_p(WDT_EFDR); /* select WDT0 */ @@ -101,7 +101,7 @@ static int w83697ug_select_wd_register(void) outb_p(c, WDT_EFDR); /* set pin118 to WDT0 */ } else { - printk(KERN_ERR PFX "No W83697UG/UF could be found\n"); + pr_err("No W83697UG/UF could be found\n"); return -ENODEV; } @@ -131,8 +131,8 @@ static int w83697ug_init(void) outb_p(0xF6, WDT_EFER); /* Select CRF6 */ t = inb_p(WDT_EFDR); /* read CRF6 */ if (t != 0) { - printk(KERN_INFO PFX "Watchdog already running." - " Resetting timeout to %d sec\n", timeout); + pr_info("Watchdog already running. Resetting timeout to %d sec\n", + timeout); outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */ } outb_p(0xF5, WDT_EFER); /* Select CRF5 */ @@ -286,8 +286,7 @@ static int wdt_close(struct inode *inode, struct file *file) if (expect_close == 42) wdt_disable(); else { - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); wdt_ping(); } expect_close = 0; @@ -340,18 +339,16 @@ static int __init wdt_init(void) { int ret; - printk(KERN_INFO "WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising.\n"); + pr_info("WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising\n"); if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be 1<=timeout<=255, using %d\n", + pr_info("timeout value must be 1<=timeout<=255, using %d\n", WATCHDOG_TIMEOUT); } if (!request_region(wdt_io, 1, WATCHDOG_NAME)) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_io); + pr_err("I/O address 0x%04x already in use\n", wdt_io); ret = -EIO; goto out; } @@ -362,20 +359,18 @@ static int __init wdt_init(void) ret = register_reboot_notifier(&wdt_notifier); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto unreg_regions; } ret = misc_register(&wdt_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_reboot; } - printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); out: diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c index 24587d2..7874ae0 100644 --- a/drivers/watchdog/w83877f_wdt.c +++ b/drivers/watchdog/w83877f_wdt.c @@ -42,6 +42,8 @@ * daemon always getting scheduled within that time frame. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -56,10 +58,8 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #define OUR_NAME "w83877f_wdt" -#define PFX OUR_NAME ": " #define ENABLE_W83877F_PORT 0x3F0 #define ENABLE_W83877F 0x87 @@ -91,8 +91,8 @@ MODULE_PARM_DESC(timeout, __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -126,8 +126,7 @@ static void wdt_timer_ping(unsigned long data) spin_unlock(&wdt_spinlock); } else - printk(KERN_WARNING PFX - "Heartbeat lost! Will not ping the watchdog\n"); + pr_warn("Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -165,7 +164,7 @@ static void wdt_startup(void) wdt_change(WDT_ENABLE); - printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); + pr_info("Watchdog timer is now enabled\n"); } static void wdt_turnoff(void) @@ -175,7 +174,7 @@ static void wdt_turnoff(void) wdt_change(WDT_DISABLE); - printk(KERN_INFO PFX "Watchdog timer is now disabled...\n"); + pr_info("Watchdog timer is now disabled...\n"); } static void wdt_keepalive(void) @@ -234,8 +233,7 @@ static int fop_close(struct inode *inode, struct file *file) wdt_turnoff(); else { del_timer(&timer); - printk(KERN_CRIT PFX - "device file closed unexpectedly. Will not stop the WDT!\n"); + pr_crit("device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; @@ -357,42 +355,37 @@ static int __init w83877f_wdt_init(void) if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX - "timeout value must be 1 <= x <= 3600, using %d\n", - timeout); + pr_info("timeout value must be 1 <= x <= 3600, using %d\n", + timeout); } if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - ENABLE_W83877F_PORT); + pr_err("I/O address 0x%04x already in use\n", + ENABLE_W83877F_PORT); rc = -EIO; goto err_out; } if (!request_region(WDT_PING, 1, "W8387FF WDT")) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - WDT_PING); + pr_err("I/O address 0x%04x already in use\n", WDT_PING); rc = -EIO; goto err_out_region1; } rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", rc); + pr_err("cannot register reboot notifier (err=%d)\n", rc); goto err_out_region2; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX - "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n", + pr_info("WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); return 0; diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c index 6e6743d..5d2c902 100644 --- a/drivers/watchdog/w83977f_wdt.c +++ b/drivers/watchdog/w83977f_wdt.c @@ -15,6 +15,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -29,12 +31,9 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <asm/system.h> #define WATCHDOG_VERSION "1.00" #define WATCHDOG_NAME "W83977F WDT" -#define PFX WATCHDOG_NAME ": " -#define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" #define IO_INDEX_PORT 0x3F0 #define IO_DATA_PORT (IO_INDEX_PORT+1) @@ -59,8 +58,8 @@ MODULE_PARM_DESC(timeout, module_param(testmode, int, 0); MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -131,7 +130,7 @@ static int wdt_start(void) spin_unlock_irqrestore(&spinlock, flags); - printk(KERN_INFO PFX "activated.\n"); + pr_info("activated\n"); return 0; } @@ -185,7 +184,7 @@ static int wdt_stop(void) spin_unlock_irqrestore(&spinlock, flags); - printk(KERN_INFO PFX "shutdown.\n"); + pr_info("shutdown\n"); return 0; } @@ -313,8 +312,7 @@ static int wdt_release(struct inode *inode, struct file *file) clear_bit(0, &timer_alive); } else { wdt_keepalive(); - printk(KERN_CRIT PFX - "unexpected close, not stopping watchdog!\n"); + pr_crit("unexpected close, not stopping watchdog!\n"); } expect_close = 0; return 0; @@ -471,7 +469,7 @@ static int __init w83977f_wdt_init(void) { int rc; - printk(KERN_INFO PFX DRIVER_VERSION); + pr_info("driver v%s\n", WATCHDOG_VERSION); /* * Check that the timeout value is within it's range; @@ -479,36 +477,31 @@ static int __init w83977f_wdt_init(void) */ if (wdt_set_timeout(timeout)) { wdt_set_timeout(DEFAULT_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be 15 <= timeout <= 7635, using %d\n", - DEFAULT_TIMEOUT); + pr_info("timeout value must be 15 <= timeout <= 7635, using %d\n", + DEFAULT_TIMEOUT); } if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - IO_INDEX_PORT); + pr_err("I/O address 0x%04x already in use\n", IO_INDEX_PORT); rc = -EIO; goto err_out; } rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", rc); + pr_err("cannot register reboot notifier (err=%d)\n", rc); goto err_out_region; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX - "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", - timeout, nowayout, testmode); + pr_info("initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", + timeout, nowayout, testmode); return 0; diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index c3c3188..25aba6e 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -26,6 +26,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/miscdevice.h> @@ -65,8 +67,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" __MODULE_STRING(WD_TIMO) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -203,8 +205,7 @@ static int wafwdt_close(struct inode *inode, struct file *file) if (expect_close == 42) wafwdt_stop(); else { - printk(KERN_CRIT PFX - "WDT device closed unexpectedly. WDT will not stop!\n"); + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); wafwdt_ping(); } clear_bit(0, &wafwdt_is_open); @@ -256,49 +257,42 @@ static int __init wafwdt_init(void) { int ret; - printk(KERN_INFO - "WDT driver for Wafer 5823 single board computer initialising.\n"); + pr_info("WDT driver for Wafer 5823 single board computer initialising\n"); if (timeout < 1 || timeout > 255) { timeout = WD_TIMO; - printk(KERN_INFO PFX - "timeout value must be 1 <= x <= 255, using %d\n", - timeout); + pr_info("timeout value must be 1 <= x <= 255, using %d\n", + timeout); } if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, "Wafer 5823 WDT")) { - printk(KERN_ERR PFX - "I/O address 0x%04x already in use\n", - wdt_stop); + pr_err("I/O address 0x%04x already in use\n", wdt_stop); ret = -EIO; goto error; } } if (!request_region(wdt_start, 1, "Wafer 5823 WDT")) { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_start); + pr_err("I/O address 0x%04x already in use\n", wdt_start); ret = -EIO; goto error2; } ret = register_reboot_notifier(&wafwdt_notifier); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto error3; } ret = misc_register(&wafwdt_miscdev); if (ret != 0) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error4; } - printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + pr_info("initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); return ret; diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c index cfa1a15..14d768b 100644 --- a/drivers/watchdog/watchdog_core.c +++ b/drivers/watchdog/watchdog_core.c @@ -77,7 +77,7 @@ int watchdog_register_device(struct watchdog_device *wdd) /* We only support 1 watchdog device via the /dev/watchdog interface */ ret = watchdog_dev_register(wdd); if (ret) { - pr_err("error registering /dev/watchdog (err=%d).\n", ret); + pr_err("error registering /dev/watchdog (err=%d)\n", ret); return ret; } @@ -101,7 +101,7 @@ void watchdog_unregister_device(struct watchdog_device *wdd) ret = watchdog_dev_unregister(wdd); if (ret) - pr_err("error unregistering /dev/watchdog (err=%d).\n", ret); + pr_err("error unregistering /dev/watchdog (err=%d)\n", ret); } EXPORT_SYMBOL_GPL(watchdog_unregister_device); diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c index 1199da0..8558da9 100644 --- a/drivers/watchdog/watchdog_dev.c +++ b/drivers/watchdog/watchdog_dev.c @@ -226,7 +226,6 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd, err = wdd->ops->set_timeout(wdd, val); if (err < 0) return err; - wdd->timeout = val; /* If the watchdog is active then we send a keepalive ping * to make sure that the watchdog keep's running (and if * possible that it takes the new timeout) */ @@ -237,6 +236,11 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd, if (wdd->timeout == 0) return -EOPNOTSUPP; return put_user(wdd->timeout, p); + case WDIOC_GETTIMELEFT: + if (!wdd->ops->get_timeleft) + return -EOPNOTSUPP; + + return put_user(wdd->ops->get_timeleft(wdd), p); default: return -ENOTTY; } @@ -347,7 +351,7 @@ int watchdog_dev_register(struct watchdog_device *watchdog) /* Only one device can register for /dev/watchdog */ if (test_and_set_bit(0, &watchdog_dev_busy)) { - pr_err("only one watchdog can use /dev/watchdog.\n"); + pr_err("only one watchdog can use /dev/watchdog\n"); return -EBUSY; } @@ -355,8 +359,8 @@ int watchdog_dev_register(struct watchdog_device *watchdog) err = misc_register(&watchdog_miscdev); if (err != 0) { - pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n", - watchdog->info->identity, WATCHDOG_MINOR, err); + pr_err("%s: cannot register miscdev on minor=%d (err=%d)\n", + watchdog->info->identity, WATCHDOG_MINOR, err); goto out; } @@ -383,8 +387,8 @@ int watchdog_dev_unregister(struct watchdog_device *watchdog) /* We can only unregister the watchdog device that was registered */ if (watchdog != wdd) { - pr_err("%s: watchdog was not registered as /dev/watchdog.\n", - watchdog->info->identity); + pr_err("%s: watchdog was not registered as /dev/watchdog\n", + watchdog->info->identity); return -ENODEV; } diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 94ec22b..0a77655 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -26,6 +26,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/fs.h> #include <linux/init.h> #include <linux/kernel.h> @@ -49,7 +51,7 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); MODULE_ALIAS_MISCDEV(TEMP_MINOR); -static int wdrtas_nowayout = WATCHDOG_NOWAYOUT; +static bool wdrtas_nowayout = WATCHDOG_NOWAYOUT; static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0); static char wdrtas_expect_close; @@ -93,8 +95,8 @@ static int wdrtas_set_interval(int interval) result = rtas_call(wdrtas_token_set_indicator, 3, 1, NULL, WDRTAS_SURVEILLANCE_IND, 0, interval); if (result < 0 && print_msg) { - printk(KERN_ERR "wdrtas: setting the watchdog to %i " - "timeout failed: %li\n", interval, result); + pr_err("setting the watchdog to %i timeout failed: %li\n", + interval, result); print_msg--; } @@ -128,8 +130,8 @@ static int wdrtas_get_interval(int fallback_value) spin_unlock(&rtas_data_buf_lock); if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) { - printk(KERN_WARNING "wdrtas: could not get sp_spi watchdog " - "timeout (%li). Continuing\n", result); + pr_warn("could not get sp_spi watchdog timeout (%li). Continuing\n", + result); return fallback_value; } @@ -170,18 +172,18 @@ static void wdrtas_log_scanned_event(void) int i; for (i = 0; i < WDRTAS_LOGBUFFER_LEN; i += 16) - printk(KERN_INFO "wdrtas: dumping event (line %i/%i), data = " - "%02x %02x %02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", - (i / 16) + 1, (WDRTAS_LOGBUFFER_LEN / 16), - wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], - wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], - wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], - wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], - wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], - wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], - wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], - wdrtas_logbuffer[i + 14], wdrtas_logbuffer[i + 15]); + pr_info("dumping event (line %i/%i), data = " + "%02x %02x %02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + (i / 16) + 1, (WDRTAS_LOGBUFFER_LEN / 16), + wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], + wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], + wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], + wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], + wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], + wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], + wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], + wdrtas_logbuffer[i + 14], wdrtas_logbuffer[i + 15]); } /** @@ -201,8 +203,7 @@ static void wdrtas_timer_keepalive(void) (void *)__pa(wdrtas_logbuffer), WDRTAS_LOGBUFFER_LEN); if (result < 0) - printk(KERN_ERR "wdrtas: event-scan failed: %li\n", - result); + pr_err("event-scan failed: %li\n", result); if (result == 0) wdrtas_log_scanned_event(); } while (result == 0); @@ -224,8 +225,7 @@ static int wdrtas_get_temperature(void) result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature); if (result < 0) - printk(KERN_WARNING "wdrtas: reading the thermal sensor " - "failed: %i\n", result); + pr_warn("reading the thermal sensor failed: %i\n", result); else temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */ @@ -419,8 +419,7 @@ static int wdrtas_close(struct inode *inode, struct file *file) if (wdrtas_expect_close == WDRTAS_MAGIC_CHAR) wdrtas_timer_stop(); else { - printk(KERN_WARNING "wdrtas: got unexpected close. Watchdog " - "not stopped.\n"); + pr_warn("got unexpected close. Watchdog not stopped.\n"); wdrtas_timer_keepalive(); } @@ -552,30 +551,24 @@ static int wdrtas_get_tokens(void) { wdrtas_token_get_sensor_state = rtas_token("get-sensor-state"); if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) { - printk(KERN_WARNING "wdrtas: couldn't get token for " - "get-sensor-state. Trying to continue without " - "temperature support.\n"); + pr_warn("couldn't get token for get-sensor-state. Trying to continue without temperature support.\n"); } wdrtas_token_get_sp = rtas_token("ibm,get-system-parameter"); if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE) { - printk(KERN_WARNING "wdrtas: couldn't get token for " - "ibm,get-system-parameter. Trying to continue with " - "a default timeout value of %i seconds.\n", - WDRTAS_DEFAULT_INTERVAL); + pr_warn("couldn't get token for ibm,get-system-parameter. Trying to continue with a default timeout value of %i seconds.\n", + WDRTAS_DEFAULT_INTERVAL); } wdrtas_token_set_indicator = rtas_token("set-indicator"); if (wdrtas_token_set_indicator == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ERR "wdrtas: couldn't get token for " - "set-indicator. Terminating watchdog code.\n"); + pr_err("couldn't get token for set-indicator. Terminating watchdog code.\n"); return -EIO; } wdrtas_token_event_scan = rtas_token("event-scan"); if (wdrtas_token_event_scan == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ERR "wdrtas: couldn't get token for event-scan. " - "Terminating watchdog code.\n"); + pr_err("couldn't get token for event-scan. Terminating watchdog code.\n"); return -EIO; } @@ -609,17 +602,14 @@ static int wdrtas_register_devs(void) result = misc_register(&wdrtas_miscdev); if (result) { - printk(KERN_ERR "wdrtas: couldn't register watchdog misc " - "device. Terminating watchdog code.\n"); + pr_err("couldn't register watchdog misc device. Terminating watchdog code.\n"); return result; } if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE) { result = misc_register(&wdrtas_tempdev); if (result) { - printk(KERN_WARNING "wdrtas: couldn't register " - "watchdog temperature misc device. Continuing " - "without temperature support.\n"); + pr_warn("couldn't register watchdog temperature misc device. Continuing without temperature support.\n"); wdrtas_token_get_sensor_state = RTAS_UNKNOWN_SERVICE; } } @@ -643,8 +633,7 @@ static int __init wdrtas_init(void) return -ENODEV; if (register_reboot_notifier(&wdrtas_notifier)) { - printk(KERN_ERR "wdrtas: could not register reboot notifier. " - "Terminating watchdog code.\n"); + pr_err("could not register reboot notifier. Terminating watchdog code.\n"); wdrtas_unregister_devs(); return -ENODEV; } diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index d2ef002..ee4333c 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -32,6 +32,8 @@ * Matt Domsch : Added nowayout module option */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/interrupt.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -46,7 +48,6 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #include "wd501p.h" static unsigned long wdt_is_open; @@ -65,8 +66,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default=" __MODULE_STRING(WD_TIMO) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -252,11 +253,11 @@ static int wdt_get_temperature(void) static void wdt_decode_501(int status) { if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT)); + pr_crit("Overheat alarm (%d)\n", inb_p(WDT_RT)); if (!(status & WDC_SR_PSUOVER)) - printk(KERN_CRIT "PSU over voltage.\n"); + pr_crit("PSU over voltage\n"); if (!(status & WDC_SR_PSUUNDR)) - printk(KERN_CRIT "PSU under voltage.\n"); + pr_crit("PSU under voltage\n"); } /** @@ -280,25 +281,25 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) spin_lock(&wdt_lock); status = inb_p(WDT_SR); - printk(KERN_CRIT "WDT status %d\n", status); + pr_crit("WDT status %d\n", status); if (type == 501) { wdt_decode_501(status); if (tachometer) { if (!(status & WDC_SR_FANGOOD)) - printk(KERN_CRIT "Possible fan fault.\n"); + pr_crit("Possible fan fault\n"); } } if (!(status & WDC_SR_WCCR)) { #ifdef SOFTWARE_REBOOT #ifdef ONLY_TESTING - printk(KERN_CRIT "Would Reboot.\n"); + pr_crit("Would Reboot\n"); #else - printk(KERN_CRIT "Initiating system reboot.\n"); + pr_crit("Initiating system reboot\n"); emergency_restart(); #endif #else - printk(KERN_CRIT "Reset in 5ms.\n"); + pr_crit("Reset in 5ms\n"); #endif } spin_unlock(&wdt_lock); @@ -441,8 +442,7 @@ static int wdt_release(struct inode *inode, struct file *file) wdt_stop(); clear_bit(0, &wdt_is_open); } else { - printk(KERN_CRIT - "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); + pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); wdt_ping(); } expect_close = 0; @@ -593,7 +593,7 @@ static int __init wdt_init(void) int ret; if (type != 500 && type != 501) { - printk(KERN_ERR "wdt: unknown card type '%d'.\n", type); + pr_err("unknown card type '%d'\n", type); return -ENODEV; } @@ -601,53 +601,49 @@ static int __init wdt_init(void) if not reset to the default */ if (wdt_set_heartbeat(heartbeat)) { wdt_set_heartbeat(WD_TIMO); - printk(KERN_INFO "wdt: heartbeat value must be " - "0 < heartbeat < 65536, using %d\n", WD_TIMO); + pr_info("heartbeat value must be 0 < heartbeat < 65536, using %d\n", + WD_TIMO); } if (!request_region(io, 8, "wdt501p")) { - printk(KERN_ERR - "wdt: I/O address 0x%04x already in use\n", io); + pr_err("I/O address 0x%04x already in use\n", io); ret = -EBUSY; goto out; } ret = request_irq(irq, wdt_interrupt, 0, "wdt501p", NULL); if (ret) { - printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq); + pr_err("IRQ %d is not free\n", irq); goto outreg; } ret = register_reboot_notifier(&wdt_notifier); if (ret) { - printk(KERN_ERR - "wdt: cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto outirq; } if (type == 501) { ret = misc_register(&temp_miscdev); if (ret) { - printk(KERN_ERR "wdt: cannot register miscdev " - "on minor=%d (err=%d)\n", TEMP_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); goto outrbt; } } ret = misc_register(&wdt_miscdev); if (ret) { - printk(KERN_ERR - "wdt: cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto outmisc; } - printk(KERN_INFO "WDT500/501-P driver 0.10 " - "at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n", + pr_info("WDT500/501-P driver 0.10 at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n", io, irq, heartbeat, nowayout); if (type == 501) - printk(KERN_INFO "wdt: Fan Tachometer is %s\n", - (tachometer ? "Enabled" : "Disabled")); + pr_info("Fan Tachometer is %s\n", + tachometer ? "Enabled" : "Disabled"); return 0; outmisc: diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c index f551356..5eec740 100644 --- a/drivers/watchdog/wdt285.c +++ b/drivers/watchdog/wdt285.c @@ -16,6 +16,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -32,6 +34,7 @@ #include <mach/hardware.h> #include <asm/mach-types.h> +#include <asm/system_info.h> #include <asm/hardware/dec21285.h> /* @@ -49,7 +52,7 @@ static unsigned long timer_alive; */ static void watchdog_fire(int irq, void *dev_id) { - printk(KERN_CRIT "Watchdog: Would Reboot.\n"); + pr_crit("Would Reboot\n"); *CSR_TIMER4_CNTL = 0; *CSR_TIMER4_CLR = 0; } @@ -205,13 +208,11 @@ static int __init footbridge_watchdog_init(void) if (retval < 0) return retval; - printk(KERN_INFO - "Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n", - soft_margin); + pr_info("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n", + soft_margin); if (machine_is_cats()) - printk(KERN_WARNING - "Warning: Watchdog reset may not work on this machine.\n"); + pr_warn("Warning: Watchdog reset may not work on this machine\n"); return 0; } diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c index a2f01c9..65a4023 100644 --- a/drivers/watchdog/wdt977.c +++ b/drivers/watchdog/wdt977.c @@ -23,6 +23,8 @@ * Netwinders only */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> @@ -37,13 +39,10 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #include <asm/mach-types.h> #define WATCHDOG_VERSION "0.04" #define WATCHDOG_NAME "Wdt977" -#define PFX WATCHDOG_NAME ": " -#define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" #define IO_INDEX_PORT 0x370 /* on some systems it can be 0x3F0 */ #define IO_DATA_PORT (IO_INDEX_PORT + 1) @@ -68,8 +67,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300, default=" module_param(testmode, int, 0); MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -119,7 +118,7 @@ static int wdt977_start(void) outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); - printk(KERN_INFO PFX "activated.\n"); + pr_info("activated\n"); return 0; } @@ -164,7 +163,7 @@ static int wdt977_stop(void) outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); - printk(KERN_INFO PFX "shutdown.\n"); + pr_info("shutdown\n"); return 0; } @@ -288,8 +287,7 @@ static int wdt977_release(struct inode *inode, struct file *file) clear_bit(0, &timer_alive); } else { wdt977_keepalive(); - printk(KERN_CRIT PFX - "Unexpected close, not stopping watchdog!\n"); + pr_crit("Unexpected close, not stopping watchdog!\n"); } expect_close = 0; return 0; @@ -446,15 +444,14 @@ static int __init wd977_init(void) { int rc; - printk(KERN_INFO PFX DRIVER_VERSION); + pr_info("driver v%s\n", WATCHDOG_VERSION); /* Check that the timeout value is within its range; if not reset to the default */ if (wdt977_set_timeout(timeout)) { wdt977_set_timeout(DEFAULT_TIMEOUT); - printk(KERN_INFO PFX - "timeout value must be 60 < timeout < 15300, using %d\n", - DEFAULT_TIMEOUT); + pr_info("timeout value must be 60 < timeout < 15300, using %d\n", + DEFAULT_TIMEOUT); } /* on Netwinder the IOports are already reserved by @@ -462,9 +459,8 @@ static int __init wd977_init(void) */ if (!machine_is_netwinder()) { if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) { - printk(KERN_ERR PFX - "I/O address 0x%04x already in use\n", - IO_INDEX_PORT); + pr_err("I/O address 0x%04x already in use\n", + IO_INDEX_PORT); rc = -EIO; goto err_out; } @@ -472,22 +468,19 @@ static int __init wd977_init(void) rc = register_reboot_notifier(&wdt977_notifier); if (rc) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", rc); + pr_err("cannot register reboot notifier (err=%d)\n", rc); goto err_out_region; } rc = misc_register(&wdt977_miscdev); if (rc) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - wdt977_miscdev.minor, rc); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + wdt977_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX - "initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n", - timeout, nowayout, testmode); + pr_info("initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n", + timeout, nowayout, testmode); return 0; diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index e0fc3baa..1c888c7 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -37,6 +37,8 @@ * Matt Domsch : nowayout module option */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/interrupt.h> #include <linux/module.h> #include <linux/moduleparam.h> @@ -53,13 +55,10 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/system.h> #define WDT_IS_PCI #include "wd501p.h" -#define PFX "wdt_pci: " - /* We can only use 1 card due to the /dev/watchdog restriction */ static int dev_count; @@ -80,8 +79,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WD_TIMO) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -312,33 +311,32 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) status = inb(WDT_SR); udelay(8); - printk(KERN_CRIT PFX "status %d\n", status); + pr_crit("status %d\n", status); if (type == 501) { if (!(status & WDC_SR_TGOOD)) { - printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", - inb(WDT_RT)); + pr_crit("Overheat alarm (%d)\n", inb(WDT_RT)); udelay(8); } if (!(status & WDC_SR_PSUOVER)) - printk(KERN_CRIT PFX "PSU over voltage.\n"); + pr_crit("PSU over voltage\n"); if (!(status & WDC_SR_PSUUNDR)) - printk(KERN_CRIT PFX "PSU under voltage.\n"); + pr_crit("PSU under voltage\n"); if (tachometer) { if (!(status & WDC_SR_FANGOOD)) - printk(KERN_CRIT PFX "Possible fan fault.\n"); + pr_crit("Possible fan fault\n"); } } if (!(status & WDC_SR_WCCR)) { #ifdef SOFTWARE_REBOOT #ifdef ONLY_TESTING - printk(KERN_CRIT PFX "Would Reboot.\n"); + pr_crit("Would Reboot\n"); #else - printk(KERN_CRIT PFX "Initiating system reboot.\n"); + pr_crit("Initiating system reboot\n"); emergency_restart(NULL); #endif #else - printk(KERN_CRIT PFX "Reset in 5ms.\n"); + pr_crit("Reset in 5ms\n"); #endif } spin_unlock(&wdtpci_lock); @@ -484,7 +482,7 @@ static int wdtpci_release(struct inode *inode, struct file *file) if (expect_close == 42) { wdtpci_stop(); } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping timer!"); + pr_crit("Unexpected close, not stopping timer!\n"); wdtpci_ping(); } expect_close = 0; @@ -614,29 +612,29 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev, dev_count++; if (dev_count > 1) { - printk(KERN_ERR PFX "This driver only supports one device\n"); + pr_err("This driver only supports one device\n"); return -ENODEV; } if (type != 500 && type != 501) { - printk(KERN_ERR PFX "unknown card type '%d'.\n", type); + pr_err("unknown card type '%d'\n", type); return -ENODEV; } if (pci_enable_device(dev)) { - printk(KERN_ERR PFX "Not possible to enable PCI Device\n"); + pr_err("Not possible to enable PCI Device\n"); return -ENODEV; } if (pci_resource_start(dev, 2) == 0x0000) { - printk(KERN_ERR PFX "No I/O-Address for card detected\n"); + pr_err("No I/O-Address for card detected\n"); ret = -ENODEV; goto out_pci; } if (pci_request_region(dev, 2, "wdt_pci")) { - printk(KERN_ERR PFX "I/O address 0x%llx already in use\n", - (unsigned long long)pci_resource_start(dev, 2)); + pr_err("I/O address 0x%llx already in use\n", + (unsigned long long)pci_resource_start(dev, 2)); goto out_pci; } @@ -645,53 +643,48 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev, if (request_irq(irq, wdtpci_interrupt, IRQF_SHARED, "wdt_pci", &wdtpci_miscdev)) { - printk(KERN_ERR PFX "IRQ %d is not free\n", irq); + pr_err("IRQ %d is not free\n", irq); goto out_reg; } - printk(KERN_INFO - "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n", - (unsigned long long)io, irq); + pr_info("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n", + (unsigned long long)io, irq); /* Check that the heartbeat value is within its range; if not reset to the default */ if (wdtpci_set_heartbeat(heartbeat)) { wdtpci_set_heartbeat(WD_TIMO); - printk(KERN_INFO PFX - "heartbeat value must be 0 < heartbeat < 65536, using %d\n", - WD_TIMO); + pr_info("heartbeat value must be 0 < heartbeat < 65536, using %d\n", + WD_TIMO); } ret = register_reboot_notifier(&wdtpci_notifier); if (ret) { - printk(KERN_ERR PFX - "cannot register reboot notifier (err=%d)\n", ret); + pr_err("cannot register reboot notifier (err=%d)\n", ret); goto out_irq; } if (type == 501) { ret = misc_register(&temp_miscdev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - TEMP_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); goto out_rbt; } } ret = misc_register(&wdtpci_miscdev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto out_misc; } - printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", + pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", heartbeat, nowayout); if (type == 501) - printk(KERN_INFO "wdt: Fan Tachometer is %s\n", - (tachometer ? "Enabled" : "Disabled")); + pr_info("Fan Tachometer is %s\n", + tachometer ? "Enabled" : "Disabled"); ret = 0; out: diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c index 263c883..b1815c5 100644 --- a/drivers/watchdog/wm831x_wdt.c +++ b/drivers/watchdog/wm831x_wdt.c @@ -22,8 +22,8 @@ #include <linux/mfd/wm831x/pdata.h> #include <linux/mfd/wm831x/watchdog.h> -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); @@ -163,6 +163,8 @@ static int wm831x_wdt_set_timeout(struct watchdog_device *wdt_dev, ret); } + wdt_dev->timeout = timeout; + return ret; } diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c index 5d7113c..3c76693 100644 --- a/drivers/watchdog/wm8350_wdt.c +++ b/drivers/watchdog/wm8350_wdt.c @@ -8,63 +8,65 @@ * as published by the Free Software Foundation */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/fs.h> -#include <linux/miscdevice.h> #include <linux/platform_device.h> #include <linux/watchdog.h> #include <linux/uaccess.h> #include <linux/mfd/wm8350/core.h> -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -static unsigned long wm8350_wdt_users; -static struct miscdevice wm8350_wdt_miscdev; -static int wm8350_wdt_expect_close; static DEFINE_MUTEX(wdt_mutex); static struct { - int time; /* Seconds */ - u16 val; /* To be set in WM8350_SYSTEM_CONTROL_2 */ + unsigned int time; /* Seconds */ + u16 val; /* To be set in WM8350_SYSTEM_CONTROL_2 */ } wm8350_wdt_cfgs[] = { { 1, 0x02 }, { 2, 0x04 }, { 4, 0x05 }, }; -static struct wm8350 *get_wm8350(void) -{ - return dev_get_drvdata(wm8350_wdt_miscdev.parent); -} - -static int wm8350_wdt_set_timeout(struct wm8350 *wm8350, u16 value) +static int wm8350_wdt_set_timeout(struct watchdog_device *wdt_dev, + unsigned int timeout) { - int ret; + struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev); + int ret, i; u16 reg; + for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++) + if (wm8350_wdt_cfgs[i].time == timeout) + break; + if (i == ARRAY_SIZE(wm8350_wdt_cfgs)) + return -EINVAL; + mutex_lock(&wdt_mutex); wm8350_reg_unlock(wm8350); reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); reg &= ~WM8350_WDOG_TO_MASK; - reg |= value; + reg |= wm8350_wdt_cfgs[i].val; ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); wm8350_reg_lock(wm8350); mutex_unlock(&wdt_mutex); + wdt_dev->timeout = timeout; return ret; } -static int wm8350_wdt_start(struct wm8350 *wm8350) +static int wm8350_wdt_start(struct watchdog_device *wdt_dev) { + struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev); int ret; u16 reg; @@ -82,8 +84,9 @@ static int wm8350_wdt_start(struct wm8350 *wm8350) return ret; } -static int wm8350_wdt_stop(struct wm8350 *wm8350) +static int wm8350_wdt_stop(struct watchdog_device *wdt_dev) { + struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev); int ret; u16 reg; @@ -100,8 +103,9 @@ static int wm8350_wdt_stop(struct wm8350 *wm8350) return ret; } -static int wm8350_wdt_kick(struct wm8350 *wm8350) +static int wm8350_wdt_ping(struct watchdog_device *wdt_dev) { + struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev); int ret; u16 reg; @@ -115,168 +119,25 @@ static int wm8350_wdt_kick(struct wm8350 *wm8350) return ret; } -static int wm8350_wdt_open(struct inode *inode, struct file *file) -{ - struct wm8350 *wm8350 = get_wm8350(); - int ret; - - if (!wm8350) - return -ENODEV; - - if (test_and_set_bit(0, &wm8350_wdt_users)) - return -EBUSY; - - ret = wm8350_wdt_start(wm8350); - if (ret != 0) - return ret; - - return nonseekable_open(inode, file); -} - -static int wm8350_wdt_release(struct inode *inode, struct file *file) -{ - struct wm8350 *wm8350 = get_wm8350(); - - if (wm8350_wdt_expect_close) - wm8350_wdt_stop(wm8350); - else { - dev_warn(wm8350->dev, "Watchdog device closed uncleanly\n"); - wm8350_wdt_kick(wm8350); - } - - clear_bit(0, &wm8350_wdt_users); - - return 0; -} - -static ssize_t wm8350_wdt_write(struct file *file, - const char __user *data, size_t count, - loff_t *ppos) -{ - struct wm8350 *wm8350 = get_wm8350(); - size_t i; - - if (count) { - wm8350_wdt_kick(wm8350); - - if (!nowayout) { - /* In case it was set long ago */ - wm8350_wdt_expect_close = 0; - - /* scan to see whether or not we got the magic - character */ - for (i = 0; i != count; i++) { - char c; - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - wm8350_wdt_expect_close = 42; - } - } - } - return count; -} - -static const struct watchdog_info ident = { +static const struct watchdog_info wm8350_wdt_info = { .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .identity = "WM8350 Watchdog", }; -static long wm8350_wdt_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct wm8350 *wm8350 = get_wm8350(); - int ret = -ENOTTY, time, i; - void __user *argp = (void __user *)arg; - int __user *p = argp; - u16 reg; - - switch (cmd) { - case WDIOC_GETSUPPORT: - ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; - break; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - ret = put_user(0, p); - break; - - case WDIOC_SETOPTIONS: - { - int options; - - if (get_user(options, p)) - return -EFAULT; - - ret = -EINVAL; - - /* Setting both simultaneously means at least one must fail */ - if (options == WDIOS_DISABLECARD) - ret = wm8350_wdt_stop(wm8350); - - if (options == WDIOS_ENABLECARD) - ret = wm8350_wdt_start(wm8350); - break; - } - - case WDIOC_KEEPALIVE: - ret = wm8350_wdt_kick(wm8350); - break; - - case WDIOC_SETTIMEOUT: - ret = get_user(time, p); - if (ret) - break; - - if (time == 0) { - if (nowayout) - ret = -EINVAL; - else - wm8350_wdt_stop(wm8350); - break; - } - - for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++) - if (wm8350_wdt_cfgs[i].time == time) - break; - if (i == ARRAY_SIZE(wm8350_wdt_cfgs)) - ret = -EINVAL; - else - ret = wm8350_wdt_set_timeout(wm8350, - wm8350_wdt_cfgs[i].val); - break; - - case WDIOC_GETTIMEOUT: - reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); - reg &= WM8350_WDOG_TO_MASK; - for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++) - if (wm8350_wdt_cfgs[i].val == reg) - break; - if (i == ARRAY_SIZE(wm8350_wdt_cfgs)) { - dev_warn(wm8350->dev, - "Unknown watchdog configuration: %x\n", reg); - ret = -EINVAL; - } else - ret = put_user(wm8350_wdt_cfgs[i].time, p); - - } - - return ret; -} - -static const struct file_operations wm8350_wdt_fops = { +static const struct watchdog_ops wm8350_wdt_ops = { .owner = THIS_MODULE, - .llseek = no_llseek, - .write = wm8350_wdt_write, - .unlocked_ioctl = wm8350_wdt_ioctl, - .open = wm8350_wdt_open, - .release = wm8350_wdt_release, + .start = wm8350_wdt_start, + .stop = wm8350_wdt_stop, + .ping = wm8350_wdt_ping, + .set_timeout = wm8350_wdt_set_timeout, }; -static struct miscdevice wm8350_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &wm8350_wdt_fops, +static struct watchdog_device wm8350_wdt = { + .info = &wm8350_wdt_info, + .ops = &wm8350_wdt_ops, + .timeout = 4, + .min_timeout = 1, + .max_timeout = 4, }; static int __devinit wm8350_wdt_probe(struct platform_device *pdev) @@ -288,18 +149,18 @@ static int __devinit wm8350_wdt_probe(struct platform_device *pdev) return -ENODEV; } - /* Default to 4s timeout */ - wm8350_wdt_set_timeout(wm8350, 0x05); + watchdog_set_nowayout(&wm8350_wdt, nowayout); + watchdog_set_drvdata(&wm8350_wdt, wm8350); - wm8350_wdt_miscdev.parent = &pdev->dev; + /* Default to 4s timeout */ + wm8350_wdt_set_timeout(&wm8350_wdt, 4); - return misc_register(&wm8350_wdt_miscdev); + return watchdog_register_device(&wm8350_wdt); } static int __devexit wm8350_wdt_remove(struct platform_device *pdev) { - misc_deregister(&wm8350_wdt_miscdev); - + watchdog_unregister_device(&wm8350_wdt); return 0; } diff --git a/drivers/watchdog/xen_wdt.c b/drivers/watchdog/xen_wdt.c index 49bd9d3..e4a25b5 100644 --- a/drivers/watchdog/xen_wdt.c +++ b/drivers/watchdog/xen_wdt.c @@ -9,9 +9,10 @@ * 2 of the License, or (at your option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define DRV_NAME "wdt" #define DRV_VERSION "0.01" -#define PFX DRV_NAME ": " #include <linux/bug.h> #include <linux/errno.h> @@ -131,16 +132,17 @@ static int xen_wdt_open(struct inode *inode, struct file *file) static int xen_wdt_release(struct inode *inode, struct file *file) { + int err = 0; + if (expect_release) - xen_wdt_stop(); + err = xen_wdt_stop(); else { - printk(KERN_CRIT PFX - "unexpected close, not stopping watchdog!\n"); + pr_crit("unexpected close, not stopping watchdog!\n"); xen_wdt_kick(); } - is_active = false; + is_active = err; expect_release = false; - return 0; + return err; } static ssize_t xen_wdt_write(struct file *file, const char __user *data, @@ -251,30 +253,27 @@ static int __devinit xen_wdt_probe(struct platform_device *dev) case -EINVAL: if (!timeout) { timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX - "timeout value invalid, using %d\n", timeout); + pr_info("timeout value invalid, using %d\n", timeout); } ret = misc_register(&xen_wdt_miscdev); if (ret) { - printk(KERN_ERR PFX - "cannot register miscdev on minor=%d (%d)\n", + pr_err("cannot register miscdev on minor=%d (%d)\n", WATCHDOG_MINOR, ret); break; } - printk(KERN_INFO PFX - "initialized (timeout=%ds, nowayout=%d)\n", - timeout, nowayout); + pr_info("initialized (timeout=%ds, nowayout=%d)\n", + timeout, nowayout); break; case -ENOSYS: - printk(KERN_INFO PFX "not supported\n"); + pr_info("not supported\n"); ret = -ENODEV; break; default: - printk(KERN_INFO PFX "bogus return value %d\n", ret); + pr_info("bogus return value %d\n", ret); break; } @@ -299,11 +298,18 @@ static void xen_wdt_shutdown(struct platform_device *dev) static int xen_wdt_suspend(struct platform_device *dev, pm_message_t state) { - return xen_wdt_stop(); + typeof(wdt.id) id = wdt.id; + int rc = xen_wdt_stop(); + + wdt.id = id; + return rc; } static int xen_wdt_resume(struct platform_device *dev) { + if (!wdt.id) + return 0; + wdt.id = 0; return xen_wdt_start(); } @@ -326,7 +332,7 @@ static int __init xen_wdt_init_module(void) if (!xen_domain()) return -ENODEV; - printk(KERN_INFO PFX "Xen WatchDog Timer Driver v%s\n", DRV_VERSION); + pr_info("Xen WatchDog Timer Driver v%s\n", DRV_VERSION); err = platform_driver_register(&xen_wdt_driver); if (err) @@ -346,7 +352,7 @@ static void __exit xen_wdt_cleanup_module(void) { platform_device_unregister(platform_device); platform_driver_unregister(&xen_wdt_driver); - printk(KERN_INFO PFX "module unloaded\n"); + pr_info("module unloaded\n"); } module_init(xen_wdt_init_module); |