diff options
Diffstat (limited to 'include/acpi/acmacros.h')
-rw-r--r-- | include/acpi/acmacros.h | 693 |
1 files changed, 0 insertions, 693 deletions
diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h deleted file mode 100644 index 1954c9d..0000000 --- a/include/acpi/acmacros.h +++ /dev/null @@ -1,693 +0,0 @@ -/****************************************************************************** - * - * Name: acmacros.h - C macros for the entire subsystem. - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#ifndef __ACMACROS_H__ -#define __ACMACROS_H__ - -/* - * Data manipulation macros - */ -#define ACPI_LOWORD(l) ((u16)(u32)(l)) -#define ACPI_HIWORD(l) ((u16)((((u32)(l)) >> 16) & 0xFFFF)) -#define ACPI_LOBYTE(l) ((u8)(u16)(l)) -#define ACPI_HIBYTE(l) ((u8)((((u16)(l)) >> 8) & 0xFF)) - -#define ACPI_SET_BIT(target,bit) ((target) |= (bit)) -#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) -#define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) -#define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) - -/* Size calculation */ - -#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) - -/* - * Extract data using a pointer. Any more than a byte and we - * get into potential aligment issues -- see the STORE macros below. - * Use with care. - */ -#define ACPI_GET8(ptr) *ACPI_CAST_PTR (u8, ptr) -#define ACPI_GET16(ptr) *ACPI_CAST_PTR (u16, ptr) -#define ACPI_GET32(ptr) *ACPI_CAST_PTR (u32, ptr) -#define ACPI_GET64(ptr) *ACPI_CAST_PTR (u64, ptr) -#define ACPI_SET8(ptr) *ACPI_CAST_PTR (u8, ptr) -#define ACPI_SET16(ptr) *ACPI_CAST_PTR (u16, ptr) -#define ACPI_SET32(ptr) *ACPI_CAST_PTR (u32, ptr) -#define ACPI_SET64(ptr) *ACPI_CAST_PTR (u64, ptr) - -/* - * Pointer manipulation - */ -#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) -#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) -#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) -#define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) - -/* Pointer/Integer type conversions */ - -#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL, (acpi_size) i) -#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) -#define ACPI_OFFSET(d, f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL) -#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) -#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) - -#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED -#define ACPI_COMPARE_NAME(a, b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) -#else -#define ACPI_COMPARE_NAME(a, b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) -#endif - -/* - * Full 64-bit integer must be available on both 32-bit and 64-bit platforms - */ -struct acpi_integer_overlay { - u32 lo_dword; - u32 hi_dword; -}; - -#define ACPI_LODWORD(integer) (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->lo_dword) -#define ACPI_HIDWORD(integer) (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->hi_dword) - -/* - * printf() format helpers - */ - -/* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */ - -#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i) - -#if ACPI_MACHINE_WIDTH == 64 -#define ACPI_FORMAT_NATIVE_UINT(i) ACPI_FORMAT_UINT64(i) -#else -#define ACPI_FORMAT_NATIVE_UINT(i) 0, (i) -#endif - -/* - * Macros for moving data around to/from buffers that are possibly unaligned. - * If the hardware supports the transfer of unaligned data, just do the store. - * Otherwise, we have to move one byte at a time. - */ -#ifdef ACPI_BIG_ENDIAN -/* - * Macros for big-endian machines - */ - -/* These macros reverse the bytes during the move, converting little-endian to big endian */ - - /* Big Endian <== Little Endian */ - /* Hi...Lo Lo...Hi */ -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_16_TO_32(d, s) {(*(u32 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_16_TO_64(d, s) {(*(u64 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ - -#define ACPI_MOVE_32_TO_32(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];} - -#define ACPI_MOVE_32_TO_64(d, s) {(*(u64 *)(void *)(d))=0;\ - ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\ - ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\ - ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ - -#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ - -#define ACPI_MOVE_64_TO_64(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\ - (( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];} -#else -/* - * Macros for little-endian machines - */ - -#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED - -/* The hardware supports unaligned transfers, just do the little-endian move */ - -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d, s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_32(d, s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s) -#define ACPI_MOVE_16_TO_64(d, s) *(u64 *)(void *)(d) = *(u16 *)(void *)(s) - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ -#define ACPI_MOVE_32_TO_32(d, s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s) -#define ACPI_MOVE_32_TO_64(d, s) *(u64 *)(void *)(d) = *(u32 *)(void *)(s) - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ -#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ -#define ACPI_MOVE_64_TO_64(d, s) *(u64 *)(void *)(d) = *(u64 *)(void *)(s) - -#else -/* - * The hardware does not support unaligned transfers. We must move the - * data one byte at a time. These macros work whether the source or - * the destination (or both) is/are unaligned. (Little-endian move) - */ - -/* 16-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_16_TO_16(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];} - -#define ACPI_MOVE_16_TO_32(d, s) {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);} -#define ACPI_MOVE_16_TO_64(d, s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);} - -/* 32-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ - -#define ACPI_MOVE_32_TO_32(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];} - -#define ACPI_MOVE_32_TO_64(d, s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d, s);} - -/* 64-bit source, 16/32/64 destination */ - -#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */ -#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */ -#define ACPI_MOVE_64_TO_64(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\ - (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\ - (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\ - (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\ - (( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\ - (( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\ - (( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\ - (( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];} -#endif -#endif - -/* Macros based on machine integer width */ - -#if ACPI_MACHINE_WIDTH == 32 -#define ACPI_MOVE_SIZE_TO_16(d, s) ACPI_MOVE_32_TO_16(d, s) - -#elif ACPI_MACHINE_WIDTH == 64 -#define ACPI_MOVE_SIZE_TO_16(d, s) ACPI_MOVE_64_TO_16(d, s) - -#else -#error unknown ACPI_MACHINE_WIDTH -#endif - -/* - * Fast power-of-two math macros for non-optimized compilers - */ -#define _ACPI_DIV(value, power_of2) ((u32) ((value) >> (power_of2))) -#define _ACPI_MUL(value, power_of2) ((u32) ((value) << (power_of2))) -#define _ACPI_MOD(value, divisor) ((u32) ((value) & ((divisor) -1))) - -#define ACPI_DIV_2(a) _ACPI_DIV(a, 1) -#define ACPI_MUL_2(a) _ACPI_MUL(a, 1) -#define ACPI_MOD_2(a) _ACPI_MOD(a, 2) - -#define ACPI_DIV_4(a) _ACPI_DIV(a, 2) -#define ACPI_MUL_4(a) _ACPI_MUL(a, 2) -#define ACPI_MOD_4(a) _ACPI_MOD(a, 4) - -#define ACPI_DIV_8(a) _ACPI_DIV(a, 3) -#define ACPI_MUL_8(a) _ACPI_MUL(a, 3) -#define ACPI_MOD_8(a) _ACPI_MOD(a, 8) - -#define ACPI_DIV_16(a) _ACPI_DIV(a, 4) -#define ACPI_MUL_16(a) _ACPI_MUL(a, 4) -#define ACPI_MOD_16(a) _ACPI_MOD(a, 16) - -#define ACPI_DIV_32(a) _ACPI_DIV(a, 5) -#define ACPI_MUL_32(a) _ACPI_MUL(a, 5) -#define ACPI_MOD_32(a) _ACPI_MOD(a, 32) - -/* - * Rounding macros (Power of two boundaries only) - */ -#define ACPI_ROUND_DOWN(value, boundary) (((acpi_size)(value)) & \ - (~(((acpi_size) boundary)-1))) - -#define ACPI_ROUND_UP(value, boundary) ((((acpi_size)(value)) + \ - (((acpi_size) boundary)-1)) & \ - (~(((acpi_size) boundary)-1))) - -/* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */ - -#define ACPI_ROUND_DOWN_TO_32BIT(a) ACPI_ROUND_DOWN(a, 4) -#define ACPI_ROUND_DOWN_TO_64BIT(a) ACPI_ROUND_DOWN(a, 8) -#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a, sizeof(acpi_size)) - -#define ACPI_ROUND_UP_TO_32BIT(a) ACPI_ROUND_UP(a, 4) -#define ACPI_ROUND_UP_TO_64BIT(a) ACPI_ROUND_UP(a, 8) -#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a, sizeof(acpi_size)) - -#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7) -#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a)) - -#define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10) - -/* Generic (non-power-of-two) rounding */ - -#define ACPI_ROUND_UP_TO(value, boundary) (((value) + ((boundary)-1)) / (boundary)) - -#define ACPI_IS_MISALIGNED(value) (((acpi_size) value) & (sizeof(acpi_size)-1)) - -/* - * Bitmask creation - * Bit positions start at zero. - * MASK_BITS_ABOVE creates a mask starting AT the position and above - * MASK_BITS_BELOW creates a mask starting one bit BELOW the position - */ -#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_INTEGER_MAX) << ((u32) (position)))) -#define ACPI_MASK_BITS_BELOW(position) ((ACPI_INTEGER_MAX) << ((u32) (position))) - -/* Bitfields within ACPI registers */ - -#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) ((val << pos) & mask) -#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask) - -#define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask)) - -/* - * A struct acpi_namespace_node can appear in some contexts - * where a pointer to a union acpi_operand_object can also - * appear. This macro is used to distinguish them. - * - * The "Descriptor" field is the first field in both structures. - */ -#define ACPI_GET_DESCRIPTOR_TYPE(d) (((union acpi_descriptor *)(void *)(d))->common.descriptor_type) -#define ACPI_SET_DESCRIPTOR_TYPE(d, t) (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t) - -/* Macro to test the object type */ - -#define ACPI_GET_OBJECT_TYPE(d) (((union acpi_operand_object *)(void *)(d))->common.type) - -/* - * Macros for the master AML opcode table - */ -#if defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT) -#define ACPI_OP(name, Pargs, Iargs, obj_type, class, type, flags) \ - {name, (u32)(Pargs), (u32)(Iargs), (u32)(flags), obj_type, class, type} -#else -#define ACPI_OP(name, Pargs, Iargs, obj_type, class, type, flags) \ - {(u32)(Pargs), (u32)(Iargs), (u32)(flags), obj_type, class, type} -#endif - -#ifdef ACPI_DISASSEMBLER -#define ACPI_DISASM_ONLY_MEMBERS(a) a; -#else -#define ACPI_DISASM_ONLY_MEMBERS(a) -#endif - -#define ARG_TYPE_WIDTH 5 -#define ARG_1(x) ((u32)(x)) -#define ARG_2(x) ((u32)(x) << (1 * ARG_TYPE_WIDTH)) -#define ARG_3(x) ((u32)(x) << (2 * ARG_TYPE_WIDTH)) -#define ARG_4(x) ((u32)(x) << (3 * ARG_TYPE_WIDTH)) -#define ARG_5(x) ((u32)(x) << (4 * ARG_TYPE_WIDTH)) -#define ARG_6(x) ((u32)(x) << (5 * ARG_TYPE_WIDTH)) - -#define ARGI_LIST1(a) (ARG_1(a)) -#define ARGI_LIST2(a, b) (ARG_1(b)|ARG_2(a)) -#define ARGI_LIST3(a, b, c) (ARG_1(c)|ARG_2(b)|ARG_3(a)) -#define ARGI_LIST4(a, b, c, d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a)) -#define ARGI_LIST5(a, b, c, d, e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a)) -#define ARGI_LIST6(a, b, c, d, e, f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a)) - -#define ARGP_LIST1(a) (ARG_1(a)) -#define ARGP_LIST2(a, b) (ARG_1(a)|ARG_2(b)) -#define ARGP_LIST3(a, b, c) (ARG_1(a)|ARG_2(b)|ARG_3(c)) -#define ARGP_LIST4(a, b, c, d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)) -#define ARGP_LIST5(a, b, c, d, e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)) -#define ARGP_LIST6(a, b, c, d, e, f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f)) - -#define GET_CURRENT_ARG_TYPE(list) (list & ((u32) 0x1F)) -#define INCREMENT_ARG_LIST(list) (list >>= ((u32) ARG_TYPE_WIDTH)) - -#if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES) -/* - * Module name is include in both debug and non-debug versions primarily for - * error messages. The __FILE__ macro is not very useful for this, because it - * often includes the entire pathname to the module - */ -#define ACPI_MODULE_NAME(name) static const char ACPI_UNUSED_VAR _acpi_module_name[] = name; -#else -#define ACPI_MODULE_NAME(name) -#endif - -/* - * Ascii error messages can be configured out - */ -#ifndef ACPI_NO_ERROR_MESSAGES -#define AE_INFO _acpi_module_name, __LINE__ - -/* - * Error reporting. Callers module and line number are inserted by AE_INFO, - * the plist contains a set of parens to allow variable-length lists. - * These macros are used for both the debug and non-debug versions of the code. - */ -#define ACPI_INFO(plist) acpi_ut_info plist -#define ACPI_WARNING(plist) acpi_ut_warning plist -#define ACPI_EXCEPTION(plist) acpi_ut_exception plist -#define ACPI_ERROR(plist) acpi_ut_error plist -#define ACPI_ERROR_NAMESPACE(s, e) acpi_ns_report_error (AE_INFO, s, e); -#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ns_report_method_error (AE_INFO, s, n, p, e); - -#else - -/* No error messages */ - -#define ACPI_INFO(plist) -#define ACPI_WARNING(plist) -#define ACPI_EXCEPTION(plist) -#define ACPI_ERROR(plist) -#define ACPI_ERROR_NAMESPACE(s, e) -#define ACPI_ERROR_METHOD(s, n, p, e) -#endif - -/* - * Debug macros that are conditionally compiled - */ -#ifdef ACPI_DEBUG_OUTPUT - -/* - * Common parameters used for debug output functions: - * line number, function name, module(file) name, component ID - */ -#define ACPI_DEBUG_PARAMETERS __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT - -/* - * Function entry tracing - */ - -/* - * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header, - * define it now. This is the case where there the compiler does not support - * a __func__ macro or equivalent. - */ -#ifndef ACPI_GET_FUNCTION_NAME -#define ACPI_GET_FUNCTION_NAME _acpi_function_name -/* - * The Name parameter should be the procedure name as a quoted string. - * The function name is also used by the function exit macros below. - * Note: (const char) is used to be compatible with the debug interfaces - * and macros such as __func__. - */ -#define ACPI_FUNCTION_NAME(name) static const char _acpi_function_name[] = #name; - -#else -/* Compiler supports __func__ (or equivalent) -- Ignore this macro */ - -#define ACPI_FUNCTION_NAME(name) -#endif - -#ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE - -#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace(ACPI_DEBUG_PARAMETERS) -#define ACPI_FUNCTION_TRACE_PTR(a, b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS, (void *)b) -#define ACPI_FUNCTION_TRACE_U32(a, b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS, (u32)b) -#define ACPI_FUNCTION_TRACE_STR(a, b) ACPI_FUNCTION_NAME(a) \ - acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS, (char *)b) - -#define ACPI_FUNCTION_ENTRY() acpi_ut_track_stack_ptr() - -/* - * Function exit tracing. - * WARNING: These macros include a return statement. This is usually considered - * bad form, but having a separate exit macro is very ugly and difficult to maintain. - * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros - * so that "_AcpiFunctionName" is defined. - * - * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining - * about these constructs. - */ -#ifdef ACPI_USE_DO_WHILE_0 -#define ACPI_DO_WHILE0(a) do a while(0) -#else -#define ACPI_DO_WHILE0(a) a -#endif - -#define return_VOID ACPI_DO_WHILE0 ({ \ - acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \ - return;}) -/* - * There are two versions of most of the return macros. The default version is - * safer, since it avoids side-effects by guaranteeing that the argument will - * not be evaluated twice. - * - * A less-safe version of the macros is provided for optional use if the - * compiler uses excessive CPU stack (for example, this may happen in the - * debug case if code optimzation is disabled.) - */ -#ifndef ACPI_SIMPLE_RETURN_MACROS - -#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \ - register acpi_status _s = (s); \ - acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \ - return (_s); }) -#define return_PTR(s) ACPI_DO_WHILE0 ({ \ - register void *_s = (void *) (s); \ - acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \ - return (_s); }) -#define return_VALUE(s) ACPI_DO_WHILE0 ({ \ - register acpi_integer _s = (s); \ - acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \ - return (_s); }) -#define return_UINT8(s) ACPI_DO_WHILE0 ({ \ - register u8 _s = (u8) (s); \ - acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \ - return (_s); }) -#define return_UINT32(s) ACPI_DO_WHILE0 ({ \ - register u32 _s = (u32) (s); \ - acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \ - return (_s); }) -#else /* Use original less-safe macros */ - -#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \ - acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \ - return((s)); }) -#define return_PTR(s) ACPI_DO_WHILE0 ({ \ - acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \ - return((s)); }) -#define return_VALUE(s) ACPI_DO_WHILE0 ({ \ - acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) (s)); \ - return((s)); }) -#define return_UINT8(s) return_VALUE(s) -#define return_UINT32(s) return_VALUE(s) - -#endif /* ACPI_SIMPLE_RETURN_MACROS */ - -#else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */ - -#define ACPI_FUNCTION_TRACE(a) -#define ACPI_FUNCTION_TRACE_PTR(a,b) -#define ACPI_FUNCTION_TRACE_U32(a,b) -#define ACPI_FUNCTION_TRACE_STR(a,b) -#define ACPI_FUNCTION_EXIT -#define ACPI_FUNCTION_STATUS_EXIT(s) -#define ACPI_FUNCTION_VALUE_EXIT(s) -#define ACPI_FUNCTION_TRACE(a) -#define ACPI_FUNCTION_ENTRY() - -#define return_VOID return -#define return_ACPI_STATUS(s) return(s) -#define return_VALUE(s) return(s) -#define return_UINT8(s) return(s) -#define return_UINT32(s) return(s) -#define return_PTR(s) return(s) - -#endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */ - -/* Conditional execution */ - -#define ACPI_DEBUG_EXEC(a) a -#define ACPI_NORMAL_EXEC(a) - -#define ACPI_DEBUG_DEFINE(a) a; -#define ACPI_DEBUG_ONLY_MEMBERS(a) a; -#define _VERBOSE_STRUCTURES - -/* Stack and buffer dumping */ - -#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a), 0) -#define ACPI_DUMP_OPERANDS(a, b, c) acpi_ex_dump_operands(a, b, c) - -#define ACPI_DUMP_ENTRY(a, b) acpi_ns_dump_entry (a, b) -#define ACPI_DUMP_PATHNAME(a, b, c, d) acpi_ns_dump_pathname(a, b, c, d) -#define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a) -#define ACPI_DUMP_BUFFER(a, b) acpi_ut_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT) - -/* - * Master debug print macros - * Print iff: - * 1) Debug print for the current component is enabled - * 2) Debug error level or trace level for the print statement is enabled - */ -#define ACPI_DEBUG_PRINT(plist) acpi_ut_debug_print plist -#define ACPI_DEBUG_PRINT_RAW(plist) acpi_ut_debug_print_raw plist - -#else -/* - * This is the non-debug case -- make everything go away, - * leaving no executable debug code! - */ -#define ACPI_DEBUG_EXEC(a) -#define ACPI_NORMAL_EXEC(a) a; - -#define ACPI_DEBUG_DEFINE(a) do { } while(0) -#define ACPI_DEBUG_ONLY_MEMBERS(a) do { } while(0) -#define ACPI_FUNCTION_NAME(a) do { } while(0) -#define ACPI_FUNCTION_TRACE(a) do { } while(0) -#define ACPI_FUNCTION_TRACE_PTR(a, b) do { } while(0) -#define ACPI_FUNCTION_TRACE_U32(a, b) do { } while(0) -#define ACPI_FUNCTION_TRACE_STR(a, b) do { } while(0) -#define ACPI_FUNCTION_EXIT do { } while(0) -#define ACPI_FUNCTION_STATUS_EXIT(s) do { } while(0) -#define ACPI_FUNCTION_VALUE_EXIT(s) do { } while(0) -#define ACPI_FUNCTION_ENTRY() do { } while(0) -#define ACPI_DUMP_STACK_ENTRY(a) do { } while(0) -#define ACPI_DUMP_OPERANDS(a, b, c) do { } while(0) -#define ACPI_DUMP_ENTRY(a, b) do { } while(0) -#define ACPI_DUMP_TABLES(a, b) do { } while(0) -#define ACPI_DUMP_PATHNAME(a, b, c, d) do { } while(0) -#define ACPI_DUMP_RESOURCE_LIST(a) do { } while(0) -#define ACPI_DUMP_BUFFER(a, b) do { } while(0) -#define ACPI_DEBUG_PRINT(pl) do { } while(0) -#define ACPI_DEBUG_PRINT_RAW(pl) do { } while(0) - -#define return_VOID return -#define return_ACPI_STATUS(s) return(s) -#define return_VALUE(s) return(s) -#define return_UINT8(s) return(s) -#define return_UINT32(s) return(s) -#define return_PTR(s) return(s) - -#endif - -/* - * Some code only gets executed when the debugger is built in. - * Note that this is entirely independent of whether the - * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not. - */ -#ifdef ACPI_DEBUGGER -#define ACPI_DEBUGGER_EXEC(a) a -#else -#define ACPI_DEBUGGER_EXEC(a) -#endif - -#ifdef ACPI_DEBUG_OUTPUT -/* - * 1) Set name to blanks - * 2) Copy the object name - */ -#define ACPI_ADD_OBJECT_NAME(a,b) ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\ - ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name)) -#else - -#define ACPI_ADD_OBJECT_NAME(a,b) -#endif - -/* - * Memory allocation tracking (DEBUG ONLY) - */ -#define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__ - -#ifndef ACPI_DBG_TRACK_ALLOCATIONS - -/* Memory allocation */ - -#ifndef ACPI_ALLOCATE -#define ACPI_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a), ACPI_MEM_PARAMETERS) -#endif -#ifndef ACPI_ALLOCATE_ZEROED -#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed((acpi_size)(a), ACPI_MEM_PARAMETERS) -#endif -#ifndef ACPI_FREE -#define ACPI_FREE(a) acpio_os_free(a) -#endif -#define ACPI_MEM_TRACKING(a) - -#else - -/* Memory allocation */ - -#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS) -#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS) -#define ACPI_FREE(a) acpi_ut_free_and_track(a, ACPI_MEM_PARAMETERS) -#define ACPI_MEM_TRACKING(a) a - -#endif /* ACPI_DBG_TRACK_ALLOCATIONS */ - -/* Preemption point */ -#ifndef ACPI_PREEMPTION_POINT -#define ACPI_PREEMPTION_POINT() /* no preemption */ -#endif - -#endif /* ACMACROS_H */ |