diff options
Diffstat (limited to 'include/asm-mips/uaccess.h')
| -rw-r--r-- | include/asm-mips/uaccess.h | 852 |
1 files changed, 0 insertions, 852 deletions
diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h deleted file mode 100644 index 66523d6..0000000 --- a/include/asm-mips/uaccess.h +++ /dev/null @@ -1,852 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 2007 Maciej W. Rozycki - */ -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/thread_info.h> -#include <asm-generic/uaccess.h> - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ -#ifdef CONFIG_32BIT - -#define __UA_LIMIT 0x80000000UL - -#define __UA_ADDR ".word" -#define __UA_LA "la" -#define __UA_ADDU "addu" -#define __UA_t0 "$8" -#define __UA_t1 "$9" - -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT - -#define __UA_LIMIT (- TASK_SIZE) - -#define __UA_ADDR ".dword" -#define __UA_LA "dla" -#define __UA_ADDU "daddu" -#define __UA_t0 "$12" -#define __UA_t1 "$13" - -#endif /* CONFIG_64BIT */ - -/* - * USER_DS is a bitmask that has the bits set that may not be set in a valid - * userspace address. Note that we limit 32-bit userspace to 0x7fff8000 but - * the arithmetic we're doing only works if the limit is a power of two, so - * we use 0x80000000 here on 32-bit kernels. If a process passes an invalid - * address in this range it's the process's problem, not ours :-) - */ - -#define KERNEL_DS ((mm_segment_t) { 0UL }) -#define USER_DS ((mm_segment_t) { __UA_LIMIT }) - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - - -/* - * Is a address valid? This does a straighforward calculation rather - * than tests. - * - * Address valid if: - * - "addr" doesn't have any high-bits set - * - AND "size" doesn't have any high-bits set - * - AND "addr+size" doesn't have any high-bits set - * - OR we are in kernel mode. - * - * __ua_size() is a trick to avoid runtime checking of positive constant - * sizes; for those we already know at compile time that the size is ok. - */ -#define __ua_size(size) \ - ((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size)) - -/* - * access_ok: - Checks if a user space pointer is valid - * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that - * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe - * to write to a block, it is always safe to read from it. - * @addr: User space pointer to start of block to check - * @size: Size of block to check - * - * Context: User context only. This function may sleep. - * - * Checks if a pointer to a block of memory in user space is valid. - * - * Returns true (nonzero) if the memory block may be valid, false (zero) - * if it is definitely invalid. - * - * Note that, depending on architecture, this function probably just - * checks that the pointer is in the user space range - after calling - * this function, memory access functions may still return -EFAULT. - */ - -#define __access_mask get_fs().seg - -#define __access_ok(addr, size, mask) \ - (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0) - -#define access_ok(type, addr, size) \ - likely(__access_ok((unsigned long)(addr), (size), __access_mask)) - -/* - * put_user: - Write a simple value into user space. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Returns zero on success, or -EFAULT on error. - */ -#define put_user(x,ptr) \ - __put_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * get_user: - Get a simple variable from user space. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define get_user(x,ptr) \ - __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * __put_user: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - */ -#define __put_user(x,ptr) \ - __put_user_nocheck((x), (ptr), sizeof(*(ptr))) - -/* - * __get_user: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define __get_user(x,ptr) \ - __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - -/* - * Yuck. We need two variants, one for 64bit operation and one - * for 32 bit mode and old iron. - */ -#ifdef CONFIG_32BIT -#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr) -#endif -#ifdef CONFIG_64BIT -#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr) -#endif - -extern void __get_user_unknown(void); - -#define __get_user_common(val, size, ptr) \ -do { \ - switch (size) { \ - case 1: __get_user_asm(val, "lb", ptr); break; \ - case 2: __get_user_asm(val, "lh", ptr); break; \ - case 4: __get_user_asm(val, "lw", ptr); break; \ - case 8: __GET_USER_DW(val, ptr); break; \ - default: __get_user_unknown(); break; \ - } \ -} while (0) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - \ - __get_user_common((x), size, ptr); \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ - \ - if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ - __get_user_common((x), size, __gu_ptr); \ - \ - __gu_err; \ -}) - -#define __get_user_asm(val, insn, addr) \ -{ \ - long __gu_tmp; \ - \ - __asm__ __volatile__( \ - "1: " insn " %1, %3 \n" \ - "2: \n" \ - " .section .fixup,\"ax\" \n" \ - "3: li %0, %4 \n" \ - " j 2b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " "__UA_ADDR "\t1b, 3b \n" \ - " .previous \n" \ - : "=r" (__gu_err), "=r" (__gu_tmp) \ - : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \ - \ - (val) = (__typeof__(*(addr))) __gu_tmp; \ -} - -/* - * Get a long long 64 using 32 bit registers. - */ -#define __get_user_asm_ll32(val, addr) \ -{ \ - union { \ - unsigned long long l; \ - __typeof__(*(addr)) t; \ - } __gu_tmp; \ - \ - __asm__ __volatile__( \ - "1: lw %1, (%3) \n" \ - "2: lw %D1, 4(%3) \n" \ - "3: .section .fixup,\"ax\" \n" \ - "4: li %0, %4 \n" \ - " move %1, $0 \n" \ - " move %D1, $0 \n" \ - " j 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " " __UA_ADDR " 1b, 4b \n" \ - " " __UA_ADDR " 2b, 4b \n" \ - " .previous \n" \ - : "=r" (__gu_err), "=&r" (__gu_tmp.l) \ - : "0" (0), "r" (addr), "i" (-EFAULT)); \ - \ - (val) = __gu_tmp.t; \ -} - -/* - * Yuck. We need two variants, one for 64bit operation and one - * for 32 bit mode and old iron. - */ -#ifdef CONFIG_32BIT -#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr) -#endif -#ifdef CONFIG_64BIT -#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr) -#endif - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __pu_val; \ - long __pu_err = 0; \ - \ - __pu_val = (x); \ - switch (size) { \ - case 1: __put_user_asm("sb", ptr); break; \ - case 2: __put_user_asm("sh", ptr); break; \ - case 4: __put_user_asm("sw", ptr); break; \ - case 8: __PUT_USER_DW(ptr); break; \ - default: __put_user_unknown(); break; \ - } \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - long __pu_err = -EFAULT; \ - \ - if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ - switch (size) { \ - case 1: __put_user_asm("sb", __pu_addr); break; \ - case 2: __put_user_asm("sh", __pu_addr); break; \ - case 4: __put_user_asm("sw", __pu_addr); break; \ - case 8: __PUT_USER_DW(__pu_addr); break; \ - default: __put_user_unknown(); break; \ - } \ - } \ - __pu_err; \ -}) - -#define __put_user_asm(insn, ptr) \ -{ \ - __asm__ __volatile__( \ - "1: " insn " %z2, %3 # __put_user_asm\n" \ - "2: \n" \ - " .section .fixup,\"ax\" \n" \ - "3: li %0, %4 \n" \ - " j 2b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " " __UA_ADDR " 1b, 3b \n" \ - " .previous \n" \ - : "=r" (__pu_err) \ - : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \ - "i" (-EFAULT)); \ -} - -#define __put_user_asm_ll32(ptr) \ -{ \ - __asm__ __volatile__( \ - "1: sw %2, (%3) # __put_user_asm_ll32 \n" \ - "2: sw %D2, 4(%3) \n" \ - "3: \n" \ - " .section .fixup,\"ax\" \n" \ - "4: li %0, %4 \n" \ - " j 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " " __UA_ADDR " 1b, 4b \n" \ - " " __UA_ADDR " 2b, 4b \n" \ - " .previous" \ - : "=r" (__pu_err) \ - : "0" (0), "r" (__pu_val), "r" (ptr), \ - "i" (-EFAULT)); \ -} - -extern void __put_user_unknown(void); - -/* - * We're generating jump to subroutines which will be outside the range of - * jump instructions - */ -#ifdef MODULE -#define __MODULE_JAL(destination) \ - ".set\tnoat\n\t" \ - __UA_LA "\t$1, " #destination "\n\t" \ - "jalr\t$1\n\t" \ - ".set\tat\n\t" -#else -#define __MODULE_JAL(destination) \ - "jal\t" #destination "\n\t" -#endif - -#ifndef CONFIG_CPU_DADDI_WORKAROUNDS -#define DADDI_SCRATCH "$0" -#else -#define DADDI_SCRATCH "$3" -#endif - -extern size_t __copy_user(void *__to, const void *__from, size_t __n); - -#define __invoke_copy_to_user(to, from, n) \ -({ \ - register void __user *__cu_to_r __asm__("$4"); \ - register const void *__cu_from_r __asm__("$5"); \ - register long __cu_len_r __asm__("$6"); \ - \ - __cu_to_r = (to); \ - __cu_from_r = (from); \ - __cu_len_r = (n); \ - __asm__ __volatile__( \ - __MODULE_JAL(__copy_user) \ - : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ - : \ - : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - DADDI_SCRATCH, "memory"); \ - __cu_len_r; \ -}) - -/* - * __copy_to_user: - Copy a block of data into user space, with less checking. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -#define __copy_to_user(to, from, n) \ -({ \ - void __user *__cu_to; \ - const void *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ - __cu_len; \ -}) - -extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); - -#define __copy_to_user_inatomic(to, from, n) \ -({ \ - void __user *__cu_to; \ - const void *__cu_from; \ - long __cu_len; \ - \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ - __cu_len; \ -}) - -#define __copy_from_user_inatomic(to, from, n) \ -({ \ - void *__cu_to; \ - const void __user *__cu_from; \ - long __cu_len; \ - \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - __cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -/* - * copy_to_user: - Copy a block of data into user space. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -#define copy_to_user(to, from, n) \ -({ \ - void __user *__cu_to; \ - const void *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \ - __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -#define __invoke_copy_from_user(to, from, n) \ -({ \ - register void *__cu_to_r __asm__("$4"); \ - register const void __user *__cu_from_r __asm__("$5"); \ - register long __cu_len_r __asm__("$6"); \ - \ - __cu_to_r = (to); \ - __cu_from_r = (from); \ - __cu_len_r = (n); \ - __asm__ __volatile__( \ - ".set\tnoreorder\n\t" \ - __MODULE_JAL(__copy_user) \ - ".set\tnoat\n\t" \ - __UA_ADDU "\t$1, %1, %2\n\t" \ - ".set\tat\n\t" \ - ".set\treorder" \ - : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ - : \ - : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - DADDI_SCRATCH, "memory"); \ - __cu_len_r; \ -}) - -#define __invoke_copy_from_user_inatomic(to, from, n) \ -({ \ - register void *__cu_to_r __asm__("$4"); \ - register const void __user *__cu_from_r __asm__("$5"); \ - register long __cu_len_r __asm__("$6"); \ - \ - __cu_to_r = (to); \ - __cu_from_r = (from); \ - __cu_len_r = (n); \ - __asm__ __volatile__( \ - ".set\tnoreorder\n\t" \ - __MODULE_JAL(__copy_user_inatomic) \ - ".set\tnoat\n\t" \ - __UA_ADDU "\t$1, %1, %2\n\t" \ - ".set\tat\n\t" \ - ".set\treorder" \ - : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ - : \ - : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - DADDI_SCRATCH, "memory"); \ - __cu_len_r; \ -}) - -/* - * __copy_from_user: - Copy a block of data from user space, with less checking. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -#define __copy_from_user(to, from, n) \ -({ \ - void *__cu_to; \ - const void __user *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -/* - * copy_from_user: - Copy a block of data from user space. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -#define copy_from_user(to, from, n) \ -({ \ - void *__cu_to; \ - const void __user *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \ - __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -#define __copy_in_user(to, from, n) __copy_from_user(to, from, n) - -#define copy_in_user(to, from, n) \ -({ \ - void __user *__cu_to; \ - const void __user *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \ - access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \ - __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -/* - * __clear_user: - Zero a block of memory in user space, with less checking. - * @to: Destination address, in user space. - * @n: Number of bytes to zero. - * - * Zero a block of memory in user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be cleared. - * On success, this will be zero. - */ -static inline __kernel_size_t -__clear_user(void __user *addr, __kernel_size_t size) -{ - __kernel_size_t res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, $0\n\t" - "move\t$6, %2\n\t" - __MODULE_JAL(__bzero) - "move\t%0, $6" - : "=r" (res) - : "r" (addr), "r" (size) - : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); - - return res; -} - -#define clear_user(addr,n) \ -({ \ - void __user * __cl_addr = (addr); \ - unsigned long __cl_size = (n); \ - if (__cl_size && access_ok(VERIFY_WRITE, \ - ((unsigned long)(__cl_addr)), __cl_size)) \ - __cl_size = __clear_user(__cl_addr, __cl_size); \ - __cl_size; \ -}) - -/* - * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * Caller must check the specified block with access_ok() before calling - * this function. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -static inline long -__strncpy_from_user(char *__to, const char __user *__from, long __len) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, %2\n\t" - "move\t$6, %3\n\t" - __MODULE_JAL(__strncpy_from_user_nocheck_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (__to), "r" (__from), "r" (__len) - : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory"); - - return res; -} - -/* - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -static inline long -strncpy_from_user(char *__to, const char __user *__from, long __len) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, %2\n\t" - "move\t$6, %3\n\t" - __MODULE_JAL(__strncpy_from_user_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (__to), "r" (__from), "r" (__len) - : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory"); - - return res; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -static inline long __strlen_user(const char __user *s) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - __MODULE_JAL(__strlen_user_nocheck_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (s) - : "$2", "$4", __UA_t0, "$31"); - - return res; -} - -/* - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -static inline long strlen_user(const char __user *s) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - __MODULE_JAL(__strlen_user_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (s) - : "$2", "$4", __UA_t0, "$31"); - - return res; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -static inline long __strnlen_user(const char __user *s, long n) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, %2\n\t" - __MODULE_JAL(__strnlen_user_nocheck_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (s), "r" (n) - : "$2", "$4", "$5", __UA_t0, "$31"); - - return res; -} - -/* - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -static inline long strnlen_user(const char __user *s, long n) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, %2\n\t" - __MODULE_JAL(__strnlen_user_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (s), "r" (n) - : "$2", "$4", "$5", __UA_t0, "$31"); - - return res; -} - -struct exception_table_entry -{ - unsigned long insn; - unsigned long nextinsn; -}; - -extern int fixup_exception(struct pt_regs *regs); - -#endif /* _ASM_UACCESS_H */ |