diff options
Diffstat (limited to 'include/linux/iio')
-rw-r--r-- | include/linux/iio/common/st_sensors.h | 274 | ||||
-rw-r--r-- | include/linux/iio/common/st_sensors_i2c.h | 20 | ||||
-rw-r--r-- | include/linux/iio/common/st_sensors_spi.h | 20 |
3 files changed, 314 insertions, 0 deletions
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h new file mode 100644 index 0000000..3cc8571 --- /dev/null +++ b/include/linux/iio/common/st_sensors.h @@ -0,0 +1,274 @@ +/* + * STMicroelectronics sensors library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_H +#define ST_SENSORS_H + +#include <linux/i2c.h> +#include <linux/spi/spi.h> +#include <linux/irqreturn.h> +#include <linux/iio/trigger.h> + +#define ST_SENSORS_TX_MAX_LENGTH 2 +#define ST_SENSORS_RX_MAX_LENGTH 6 + +#define ST_SENSORS_ODR_LIST_MAX 10 +#define ST_SENSORS_FULLSCALE_AVL_MAX 10 + +#define ST_SENSORS_NUMBER_ALL_CHANNELS 4 +#define ST_SENSORS_NUMBER_DATA_CHANNELS 3 +#define ST_SENSORS_ENABLE_ALL_AXIS 0x07 +#define ST_SENSORS_BYTE_FOR_CHANNEL 2 +#define ST_SENSORS_SCAN_X 0 +#define ST_SENSORS_SCAN_Y 1 +#define ST_SENSORS_SCAN_Z 2 +#define ST_SENSORS_DEFAULT_12_REALBITS 12 +#define ST_SENSORS_DEFAULT_16_REALBITS 16 +#define ST_SENSORS_DEFAULT_POWER_ON_VALUE 0x01 +#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE 0x00 +#define ST_SENSORS_DEFAULT_WAI_ADDRESS 0x0f +#define ST_SENSORS_DEFAULT_AXIS_ADDR 0x20 +#define ST_SENSORS_DEFAULT_AXIS_MASK 0x07 +#define ST_SENSORS_DEFAULT_AXIS_N_BIT 3 + +#define ST_SENSORS_MAX_NAME 17 +#define ST_SENSORS_MAX_4WAI 7 + +#define ST_SENSORS_LSM_CHANNELS(device_type, index, mod, endian, bits, addr) \ +{ \ + .type = device_type, \ + .modified = 1, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .scan_index = index, \ + .channel2 = mod, \ + .address = addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = bits, \ + .shift = 16 - bits, \ + .storagebits = 16, \ + .endianness = endian, \ + }, \ +} + +#define ST_SENSOR_DEV_ATTR_SAMP_FREQ() \ + IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, \ + st_sensors_sysfs_get_sampling_frequency, \ + st_sensors_sysfs_set_sampling_frequency) + +#define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \ + IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \ + st_sensors_sysfs_sampling_frequency_avail) + +#define ST_SENSORS_DEV_ATTR_SCALE_AVAIL(name) \ + IIO_DEVICE_ATTR(name, S_IRUGO, \ + st_sensors_sysfs_scale_avail, NULL , 0); + +struct st_sensor_odr_avl { + unsigned int hz; + u8 value; +}; + +struct st_sensor_odr { + u8 addr; + u8 mask; + struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX]; +}; + +struct st_sensor_power { + u8 addr; + u8 mask; + u8 value_off; + u8 value_on; +}; + +struct st_sensor_axis { + u8 addr; + u8 mask; +}; + +struct st_sensor_fullscale_avl { + unsigned int num; + u8 value; + unsigned int gain; + unsigned int gain2; +}; + +struct st_sensor_fullscale { + u8 addr; + u8 mask; + struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX]; +}; + +/** + * struct st_sensor_bdu - ST sensor device block data update + * @addr: address of the register. + * @mask: mask to write the block data update flag. + */ +struct st_sensor_bdu { + u8 addr; + u8 mask; +}; + +/** + * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt + * @addr: address of the register. + * @mask: mask to write the on/off value. + * struct ig1 - represents the Interrupt Generator 1 of sensors. + * @en_addr: address of the enable ig1 register. + * @en_mask: mask to write the on/off value for enable. + */ +struct st_sensor_data_ready_irq { + u8 addr; + u8 mask; + struct { + u8 en_addr; + u8 en_mask; + } ig1; +}; + +/** + * struct st_sensor_transfer_buffer - ST sensor device I/O buffer + * @buf_lock: Mutex to protect rx and tx buffers. + * @tx_buf: Buffer used by SPI transfer function to send data to the sensors. + * This buffer is used to avoid DMA not-aligned issue. + * @rx_buf: Buffer used by SPI transfer to receive data from sensors. + * This buffer is used to avoid DMA not-aligned issue. + */ +struct st_sensor_transfer_buffer { + struct mutex buf_lock; + u8 rx_buf[ST_SENSORS_RX_MAX_LENGTH]; + u8 tx_buf[ST_SENSORS_TX_MAX_LENGTH] ____cacheline_aligned; +}; + +/** + * struct st_sensor_transfer_function - ST sensor device I/O function + * @read_byte: Function used to read one byte. + * @write_byte: Function used to write one byte. + * @read_multiple_byte: Function used to read multiple byte. + */ +struct st_sensor_transfer_function { + int (*read_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 *res_byte); + int (*write_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, u8 data); + int (*read_multiple_byte) (struct st_sensor_transfer_buffer *tb, + struct device *dev, u8 reg_addr, int len, u8 *data, + bool multiread_bit); +}; + +/** + * struct st_sensors - ST sensors list + * @wai: Contents of WhoAmI register. + * @sensors_supported: List of supported sensors by struct itself. + * @ch: IIO channels for the sensor. + * @odr: Output data rate register and ODR list available. + * @pw: Power register of the sensor. + * @enable_axis: Enable one or more axis of the sensor. + * @fs: Full scale register and full scale list available. + * @bdu: Block data update register. + * @drdy_irq: Data ready register of the sensor. + * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read. + * @bootime: samples to discard when sensor passing from power-down to power-up. + */ +struct st_sensors { + u8 wai; + char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME]; + struct iio_chan_spec *ch; + struct st_sensor_odr odr; + struct st_sensor_power pw; + struct st_sensor_axis enable_axis; + struct st_sensor_fullscale fs; + struct st_sensor_bdu bdu; + struct st_sensor_data_ready_irq drdy_irq; + bool multi_read_bit; + unsigned int bootime; +}; + +/** + * struct st_sensor_data - ST sensor device status + * @dev: Pointer to instance of struct device (I2C or SPI). + * @trig: The trigger in use by the core driver. + * @sensor: Pointer to the current sensor struct in use. + * @current_fullscale: Maximum range of measure by the sensor. + * @enabled: Status of the sensor (false->off, true->on). + * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread. + * @buffer_data: Data used by buffer part. + * @odr: Output data rate of the sensor [Hz]. + * @get_irq_data_ready: Function to get the IRQ used for data ready signal. + * @tf: Transfer function structure used by I/O operations. + * @tb: Transfer buffers and mutex used by I/O operations. + */ +struct st_sensor_data { + struct device *dev; + struct iio_trigger *trig; + struct st_sensors *sensor; + struct st_sensor_fullscale_avl *current_fullscale; + + bool enabled; + bool multiread_bit; + + char *buffer_data; + + unsigned int odr; + + unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev); + + const struct st_sensor_transfer_function *tf; + struct st_sensor_transfer_buffer tb; +}; + +#ifdef CONFIG_IIO_BUFFER +int st_sensors_allocate_trigger(struct iio_dev *indio_dev, + const struct iio_trigger_ops *trigger_ops); + +void st_sensors_deallocate_trigger(struct iio_dev *indio_dev); + +irqreturn_t st_sensors_trigger_handler(int irq, void *p); + +int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf); +#endif + +int st_sensors_init_sensor(struct iio_dev *indio_dev); + +int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable); + +int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable); + +int st_sensors_get_sampling_frequency_avl(struct iio_dev *indio_dev, char *buf); + +int st_sensors_get_scale_avl(struct iio_dev *indio_dev, char *buf); + +int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr); + +int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable); + +int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale); + +int st_sensors_read_info_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *ch, int *val); + +int st_sensors_check_device_support(struct iio_dev *indio_dev, + int num_sensors_list, const struct st_sensors *sensors); + +ssize_t st_sensors_sysfs_get_sampling_frequency(struct device *dev, + struct device_attribute *attr, char *buf); + +ssize_t st_sensors_sysfs_set_sampling_frequency(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size); + +ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev, + struct device_attribute *attr, char *buf); + +ssize_t st_sensors_sysfs_scale_avail(struct device *dev, + struct device_attribute *attr, char *buf); + +#endif /* ST_SENSORS_H */ diff --git a/include/linux/iio/common/st_sensors_i2c.h b/include/linux/iio/common/st_sensors_i2c.h new file mode 100644 index 0000000..67d8453 --- /dev/null +++ b/include/linux/iio/common/st_sensors_i2c.h @@ -0,0 +1,20 @@ +/* + * STMicroelectronics sensors i2c library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_I2C_H +#define ST_SENSORS_I2C_H + +#include <linux/i2c.h> +#include <linux/iio/common/st_sensors.h> + +void st_sensors_i2c_configure(struct iio_dev *indio_dev, + struct i2c_client *client, struct st_sensor_data *sdata); + +#endif /* ST_SENSORS_I2C_H */ diff --git a/include/linux/iio/common/st_sensors_spi.h b/include/linux/iio/common/st_sensors_spi.h new file mode 100644 index 0000000..d964a35 --- /dev/null +++ b/include/linux/iio/common/st_sensors_spi.h @@ -0,0 +1,20 @@ +/* + * STMicroelectronics sensors spi library driver + * + * Copyright 2012-2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_SPI_H +#define ST_SENSORS_SPI_H + +#include <linux/spi/spi.h> +#include <linux/iio/common/st_sensors.h> + +void st_sensors_spi_configure(struct iio_dev *indio_dev, + struct spi_device *spi, struct st_sensor_data *sdata); + +#endif /* ST_SENSORS_SPI_H */ |