diff options
Diffstat (limited to 'include/uapi/linux')
67 files changed, 1173 insertions, 180 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index ab5d499..e7c94ee 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -62,6 +62,7 @@ header-y += auxvec.h header-y += ax25.h header-y += b1lli.h header-y += baycom.h +header-y += bcm933xx_hcs.h header-y += bfs_fs.h header-y += binfmts.h header-y += blkpg.h @@ -226,6 +227,7 @@ header-y += kvm_para.h endif header-y += l2tp.h +header-y += libc-compat.h header-y += limits.h header-y += llc.h header-y += loop.h @@ -261,6 +263,7 @@ header-y += net_dropmon.h header-y += net_tstamp.h header-y += netconf.h header-y += netdevice.h +header-y += netlink_diag.h header-y += netfilter.h header-y += netfilter_arp.h header-y += netfilter_bridge.h diff --git a/include/uapi/linux/bcm933xx_hcs.h b/include/uapi/linux/bcm933xx_hcs.h new file mode 100644 index 0000000..d228218 --- /dev/null +++ b/include/uapi/linux/bcm933xx_hcs.h @@ -0,0 +1,24 @@ +/* + * Broadcom Cable Modem firmware format + */ + +#ifndef __BCM933XX_HCS_H +#define __BCM933XX_HCS_H + +#include <linux/types.h> + +struct bcm_hcs { + __u16 magic; + __u16 control; + __u16 rev_maj; + __u16 rev_min; + __u32 build_date; + __u32 filelen; + __u32 ldaddress; + char filename[64]; + __u16 hcs; + __u16 her_znaet_chto; + __u32 crc; +}; + +#endif /* __BCM933XX_HCS */ diff --git a/include/uapi/linux/btrfs.h b/include/uapi/linux/btrfs.h index 5ef0df5..05aed70 100644 --- a/include/uapi/linux/btrfs.h +++ b/include/uapi/linux/btrfs.h @@ -447,6 +447,46 @@ struct btrfs_ioctl_send_args { __u64 reserved[4]; /* in */ }; +/* Error codes as returned by the kernel */ +enum btrfs_err_code { + notused, + BTRFS_ERROR_DEV_RAID1_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID10_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID5_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID6_MIN_NOT_MET, + BTRFS_ERROR_DEV_TGT_REPLACE, + BTRFS_ERROR_DEV_MISSING_NOT_FOUND, + BTRFS_ERROR_DEV_ONLY_WRITABLE, + BTRFS_ERROR_DEV_EXCL_RUN_IN_PROGRESS +}; +/* An error code to error string mapping for the kernel +* error codes +*/ +static inline char *btrfs_err_str(enum btrfs_err_code err_code) +{ + switch (err_code) { + case BTRFS_ERROR_DEV_RAID1_MIN_NOT_MET: + return "unable to go below two devices on raid1"; + case BTRFS_ERROR_DEV_RAID10_MIN_NOT_MET: + return "unable to go below four devices on raid10"; + case BTRFS_ERROR_DEV_RAID5_MIN_NOT_MET: + return "unable to go below two devices on raid5"; + case BTRFS_ERROR_DEV_RAID6_MIN_NOT_MET: + return "unable to go below three devices on raid6"; + case BTRFS_ERROR_DEV_TGT_REPLACE: + return "unable to remove the dev_replace target dev"; + case BTRFS_ERROR_DEV_MISSING_NOT_FOUND: + return "no missing devices found to remove"; + case BTRFS_ERROR_DEV_ONLY_WRITABLE: + return "unable to remove the only writeable device"; + case BTRFS_ERROR_DEV_EXCL_RUN_IN_PROGRESS: + return "add/delete/balance/replace/resize operation "\ + "in progress"; + default: + return NULL; + } +} + #define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \ struct btrfs_ioctl_vol_args) #define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \ @@ -530,6 +570,7 @@ struct btrfs_ioctl_send_args { struct btrfs_ioctl_quota_rescan_args) #define BTRFS_IOC_QUOTA_RESCAN_STATUS _IOR(BTRFS_IOCTL_MAGIC, 45, \ struct btrfs_ioctl_quota_rescan_args) +#define BTRFS_IOC_QUOTA_RESCAN_WAIT _IO(BTRFS_IOCTL_MAGIC, 46) #define BTRFS_IOC_GET_FSLABEL _IOR(BTRFS_IOCTL_MAGIC, 49, \ char[BTRFS_LABEL_SIZE]) #define BTRFS_IOC_SET_FSLABEL _IOW(BTRFS_IOCTL_MAGIC, 50, \ @@ -538,5 +579,4 @@ struct btrfs_ioctl_send_args { struct btrfs_ioctl_get_dev_stats) #define BTRFS_IOC_DEV_REPLACE _IOWR(BTRFS_IOCTL_MAGIC, 53, \ struct btrfs_ioctl_dev_replace_args) - #endif /* _UAPI_LINUX_BTRFS_H */ diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h index ae07bec..4e27c82 100644 --- a/include/uapi/linux/can/gw.h +++ b/include/uapi/linux/can/gw.h @@ -45,6 +45,7 @@ enum { CGW_DST_IF, /* ifindex of destination network interface */ CGW_FILTER, /* specify struct can_filter on source CAN device */ CGW_DELETED, /* number of deleted CAN frames (see max_hops param) */ + CGW_LIM_HOPS, /* limit the number of hops of this specific rule */ __CGW_MAX }; @@ -116,13 +117,19 @@ enum { * Sets a CAN receive filter for the gateway job specified by the * struct can_filter described in include/linux/can.h * - * CGW_MOD_XXX (length 17 bytes): + * CGW_MOD_(AND|OR|XOR|SET) (length 17 bytes): * Specifies a modification that's done to a received CAN frame before it is * send out to the destination interface. * * <struct can_frame> data used as operator * <u8> affected CAN frame elements * + * CGW_LIM_HOPS (length 1 byte): + * Limit the number of hops of this specific rule. Usually the received CAN + * frame can be processed as much as 'max_hops' times (which is given at module + * load time of the can-gw module). This value is used to reduce the number of + * possible hops for this gateway rule to a value smaller then max_hops. + * * CGW_CS_XOR (length 4 bytes): * Set a simple XOR checksum starting with an initial value into * data[result-idx] using data[start-idx] .. data[end-idx] diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h index bc51f77..1217f75 100644 --- a/include/uapi/linux/cm4000_cs.h +++ b/include/uapi/linux/cm4000_cs.h @@ -2,6 +2,7 @@ #define _UAPI_CM4000_H_ #include <linux/types.h> +#include <linux/ioctl.h> #define MAX_ATR 33 diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h index c22c707..c872bfd 100644 --- a/include/uapi/linux/const.h +++ b/include/uapi/linux/const.h @@ -21,4 +21,7 @@ #define _AT(T,X) ((T)(X)) #endif +#define _BITUL(x) (_AC(1,UL) << (x)) +#define _BITULL(x) (_AC(1,ULL) << (x)) + #endif /* !(_LINUX_CONST_H) */ diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index 7e75b6f..afd0cbd 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -267,9 +267,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 24 +#define DM_VERSION_MINOR 25 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2013-01-15)" +#define DM_VERSION_EXTRA "-ioctl (2013-06-26)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/uapi/linux/dn.h b/include/uapi/linux/dn.h index 9c50445..5fbdd3d 100644 --- a/include/uapi/linux/dn.h +++ b/include/uapi/linux/dn.h @@ -2,6 +2,7 @@ #define _LINUX_DN_H #include <linux/types.h> +#include <linux/if_ether.h> /* @@ -120,7 +121,7 @@ struct linkinfo_dn { * Ethernet address format (for DECnet) */ union etheraddress { - __u8 dne_addr[6]; /* Full ethernet address */ + __u8 dne_addr[ETH_ALEN]; /* Full ethernet address */ struct { __u8 dne_hiord[4]; /* DECnet HIORD prefix */ __u8 dne_nodeaddr[2]; /* DECnet node address */ diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h index 8e2b7ba..59c17a2 100644 --- a/include/uapi/linux/elf-em.h +++ b/include/uapi/linux/elf-em.h @@ -22,6 +22,7 @@ #define EM_PPC 20 /* PowerPC */ #define EM_PPC64 21 /* PowerPC64 */ #define EM_SPU 23 /* Cell BE SPU */ +#define EM_ARM 40 /* ARM 32 bit */ #define EM_SH 42 /* SuperH */ #define EM_SPARCV9 43 /* SPARC v9 64-bit */ #define EM_IA_64 50 /* HP/Intel IA-64 */ @@ -34,6 +35,7 @@ #define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */ #define EM_BLACKFIN 106 /* ADI Blackfin Processor */ #define EM_TI_C6000 140 /* TI C6X DSPs */ +#define EM_AARCH64 183 /* ARM 64 bit */ #define EM_FRV 0x5441 /* Fujitsu FR-V */ #define EM_AVR32 0x18ad /* Atmel AVR32 */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 0c9b448..38dbafa 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -993,8 +993,8 @@ enum ethtool_sfeatures_retval_bits { #define PORT_OTHER 0xff /* Which transceiver to use. */ -#define XCVR_INTERNAL 0x00 -#define XCVR_EXTERNAL 0x01 +#define XCVR_INTERNAL 0x00 /* PHY and MAC are in the same package */ +#define XCVR_EXTERNAL 0x01 /* PHY and MAC are in different packages */ #define XCVR_DUMMY1 0x02 #define XCVR_DUMMY2 0x03 #define XCVR_DUMMY3 0x04 diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h index 51da65b..2b82d7e 100644 --- a/include/uapi/linux/fib_rules.h +++ b/include/uapi/linux/fib_rules.h @@ -44,8 +44,8 @@ enum { FRA_FWMARK, /* mark */ FRA_FLOW, /* flow/class id */ FRA_UNUSED6, - FRA_UNUSED7, - FRA_UNUSED8, + FRA_SUPPRESS_IFGROUP, + FRA_SUPPRESS_PREFIXLEN, FRA_TABLE, /* Extended table id */ FRA_FWMASK, /* mask for netfilter mark */ FRA_OIFNAME, diff --git a/include/uapi/linux/fiemap.h b/include/uapi/linux/fiemap.h index d830747..0c51d61 100644 --- a/include/uapi/linux/fiemap.h +++ b/include/uapi/linux/fiemap.h @@ -40,6 +40,7 @@ struct fiemap { #define FIEMAP_FLAG_SYNC 0x00000001 /* sync file data before map */ #define FIEMAP_FLAG_XATTR 0x00000002 /* map extended attribute tree */ +#define FIEMAP_FLAG_CACHE 0x00000004 /* request caching of the extents */ #define FIEMAP_FLAGS_COMPAT (FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR) diff --git a/include/uapi/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h index d500369..1db453e 100644 --- a/include/uapi/linux/firewire-cdev.h +++ b/include/uapi/linux/firewire-cdev.h @@ -215,8 +215,8 @@ struct fw_cdev_event_request2 { * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets * without the interrupt bit set that the kernel's internal buffer for @header - * is about to overflow. (In the last case, kernels with ABI version < 5 drop - * header data up to the next interrupt packet.) + * is about to overflow. (In the last case, ABI versions < 5 drop header data + * up to the next interrupt packet.) * * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT): * diff --git a/include/uapi/linux/gen_stats.h b/include/uapi/linux/gen_stats.h index 552c8a0..6487317 100644 --- a/include/uapi/linux/gen_stats.h +++ b/include/uapi/linux/gen_stats.h @@ -9,6 +9,7 @@ enum { TCA_STATS_RATE_EST, TCA_STATS_QUEUE, TCA_STATS_APP, + TCA_STATS_RATE_EST64, __TCA_STATS_MAX, }; #define TCA_STATS_MAX (__TCA_STATS_MAX - 1) @@ -38,6 +39,16 @@ struct gnet_stats_rate_est { }; /** + * struct gnet_stats_rate_est64 - rate estimator + * @bps: current byte rate + * @pps: current packet rate + */ +struct gnet_stats_rate_est64 { + __u64 bps; + __u64 pps; +}; + +/** * struct gnet_stats_queue - queuing statistics * @qlen: queue length * @backlog: backlog size of queue diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h index e0133c7..590beda 100644 --- a/include/uapi/linux/icmpv6.h +++ b/include/uapi/linux/icmpv6.h @@ -115,6 +115,8 @@ struct icmp6hdr { #define ICMPV6_NOT_NEIGHBOUR 2 #define ICMPV6_ADDR_UNREACH 3 #define ICMPV6_PORT_UNREACH 4 +#define ICMPV6_POLICY_FAIL 5 +#define ICMPV6_REJECT_ROUTE 6 /* * Codes for Time Exceeded diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h index 82c7d1b..d7fea34 100644 --- a/include/uapi/linux/if_arp.h +++ b/include/uapi/linux/if_arp.h @@ -93,6 +93,7 @@ #define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ #define ARPHRD_CAIF 822 /* CAIF media type */ #define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ +#define ARPHRD_NETLINK 824 /* Netlink header */ #define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ #define ARPHRD_NONE 0xFFFE /* zero header length */ diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index 2d70d79..39f621a 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -14,6 +14,7 @@ #define _UAPI_LINUX_IF_BRIDGE_H #include <linux/types.h> +#include <linux/if_ether.h> #define SYSFS_BRIDGE_ATTR "bridge" #define SYSFS_BRIDGE_FDB "brforward" @@ -88,7 +89,7 @@ struct __port_info { }; struct __fdb_entry { - __u8 mac_addr[6]; + __u8 mac_addr[ETH_ALEN]; __u8 port_no; __u8 is_local; __u32 ageing_timer_value; diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index b05823c..80394e8 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -143,6 +143,7 @@ enum { IFLA_NUM_TX_QUEUES, IFLA_NUM_RX_QUEUES, IFLA_CARRIER, + IFLA_PHYS_PORT_ID, __IFLA_MAX }; @@ -221,6 +222,8 @@ enum { IFLA_BRPORT_GUARD, /* bpdu guard */ IFLA_BRPORT_PROTECT, /* root port protection */ IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ + IFLA_BRPORT_LEARNING, /* mac learning */ + IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */ __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -311,6 +314,8 @@ enum { IFLA_VXLAN_L2MISS, IFLA_VXLAN_L3MISS, IFLA_VXLAN_PORT, /* destination port */ + IFLA_VXLAN_GROUP6, + IFLA_VXLAN_LOCAL6, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) @@ -336,6 +341,7 @@ enum { IFLA_VF_VLAN, IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ + IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */ __IFLA_VF_MAX, }; @@ -362,6 +368,18 @@ struct ifla_vf_spoofchk { __u32 setting; }; +enum { + IFLA_VF_LINK_STATE_AUTO, /* link state of the uplink */ + IFLA_VF_LINK_STATE_ENABLE, /* link always up */ + IFLA_VF_LINK_STATE_DISABLE, /* link always down */ + __IFLA_VF_LINK_STATE_MAX, +}; + +struct ifla_vf_link_state { + __u32 vf; + __u32 link_state; +}; + /* VF ports management section * * Nested layout of set/get msg is: diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h index b950c02..dbf0666 100644 --- a/include/uapi/linux/if_packet.h +++ b/include/uapi/linux/if_packet.h @@ -56,6 +56,7 @@ struct sockaddr_ll { #define PACKET_FANOUT_LB 1 #define PACKET_FANOUT_CPU 2 #define PACKET_FANOUT_ROLLOVER 3 +#define PACKET_FANOUT_RND 4 #define PACKET_FANOUT_FLAG_ROLLOVER 0x1000 #define PACKET_FANOUT_FLAG_DEFRAG 0x8000 diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h index 0b46fd5..e128769 100644 --- a/include/uapi/linux/if_pppox.h +++ b/include/uapi/linux/if_pppox.h @@ -46,7 +46,7 @@ struct pppoe_addr { * PPTP addressing definition */ struct pptp_addr { - __be16 call_id; + __u16 call_id; struct in_addr sin_addr; }; @@ -135,11 +135,11 @@ struct pppoe_tag { struct pppoe_hdr { #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 ver : 4; __u8 type : 4; + __u8 ver : 4; #elif defined(__BIG_ENDIAN_BITFIELD) - __u8 type : 4; __u8 ver : 4; + __u8 type : 4; #else #error "Please fix <asm/byteorder.h>" #endif diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h index 2835b85..e9502dd 100644 --- a/include/uapi/linux/if_tun.h +++ b/include/uapi/linux/if_tun.h @@ -56,6 +56,8 @@ #define TUNGETVNETHDRSZ _IOR('T', 215, int) #define TUNSETVNETHDRSZ _IOW('T', 216, int) #define TUNSETQUEUE _IOW('T', 217, int) +#define TUNSETIFINDEX _IOW('T', 218, unsigned int) +#define TUNGETFILTER _IOR('T', 219, struct sock_fprog) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 @@ -68,6 +70,12 @@ #define IFF_MULTI_QUEUE 0x0100 #define IFF_ATTACH_QUEUE 0x0200 #define IFF_DETACH_QUEUE 0x0400 +/* read-only flag */ +#define IFF_PERSIST 0x0800 +#define IFF_NOFILTER 0x1000 + +/* Socket options */ +#define TUN_TX_TIMESTAMP 1 /* Features for GSO (TUNSETOFFLOAD). */ #define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index 9edb441..f9e8e49 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -24,30 +24,53 @@ /* Standard well-defined IP protocols. */ enum { IPPROTO_IP = 0, /* Dummy protocol for TCP */ +#define IPPROTO_IP IPPROTO_IP IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ +#define IPPROTO_ICMP IPPROTO_ICMP IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ +#define IPPROTO_IGMP IPPROTO_IGMP IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ +#define IPPROTO_IPIP IPPROTO_IPIP IPPROTO_TCP = 6, /* Transmission Control Protocol */ +#define IPPROTO_TCP IPPROTO_TCP IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ +#define IPPROTO_EGP IPPROTO_EGP IPPROTO_PUP = 12, /* PUP protocol */ +#define IPPROTO_PUP IPPROTO_PUP IPPROTO_UDP = 17, /* User Datagram Protocol */ +#define IPPROTO_UDP IPPROTO_UDP IPPROTO_IDP = 22, /* XNS IDP protocol */ +#define IPPROTO_IDP IPPROTO_IDP + IPPROTO_TP = 29, /* SO Transport Protocol Class 4 */ +#define IPPROTO_TP IPPROTO_TP IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ - IPPROTO_RSVP = 46, /* RSVP protocol */ +#define IPPROTO_DCCP IPPROTO_DCCP + IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ +#define IPPROTO_IPV6 IPPROTO_IPV6 + IPPROTO_RSVP = 46, /* RSVP Protocol */ +#define IPPROTO_RSVP IPPROTO_RSVP IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ - - IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ - - IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ - IPPROTO_AH = 51, /* Authentication Header protocol */ - IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ - IPPROTO_PIM = 103, /* Protocol Independent Multicast */ - - IPPROTO_COMP = 108, /* Compression Header protocol */ - IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_GRE IPPROTO_GRE + IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ +#define IPPROTO_ESP IPPROTO_ESP + IPPROTO_AH = 51, /* Authentication Header protocol */ +#define IPPROTO_AH IPPROTO_AH + IPPROTO_MTP = 92, /* Multicast Transport Protocol */ +#define IPPROTO_MTP IPPROTO_MTP + IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ +#define IPPROTO_BEETPH IPPROTO_BEETPH + IPPROTO_ENCAP = 98, /* Encapsulation Header */ +#define IPPROTO_ENCAP IPPROTO_ENCAP + IPPROTO_PIM = 103, /* Protocol Independent Multicast */ +#define IPPROTO_PIM IPPROTO_PIM + IPPROTO_COMP = 108, /* Compression Header Protocol */ +#define IPPROTO_COMP IPPROTO_COMP + IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_SCTP IPPROTO_SCTP IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ - - IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_UDPLITE IPPROTO_UDPLITE + IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_RAW IPPROTO_RAW IPPROTO_MAX }; diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index 53b1d56..440d5c4 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -22,22 +22,30 @@ #define _UAPI_LINUX_IN6_H #include <linux/types.h> +#include <linux/libc-compat.h> /* * IPv6 address structure */ +#if __UAPI_DEF_IN6_ADDR struct in6_addr { union { __u8 u6_addr8[16]; +#if __UAPI_DEF_IN6_ADDR_ALT __be16 u6_addr16[8]; __be32 u6_addr32[4]; +#endif } in6_u; #define s6_addr in6_u.u6_addr8 +#if __UAPI_DEF_IN6_ADDR_ALT #define s6_addr16 in6_u.u6_addr16 #define s6_addr32 in6_u.u6_addr32 +#endif }; +#endif /* __UAPI_DEF_IN6_ADDR */ +#if __UAPI_DEF_SOCKADDR_IN6 struct sockaddr_in6 { unsigned short int sin6_family; /* AF_INET6 */ __be16 sin6_port; /* Transport layer port # */ @@ -45,7 +53,9 @@ struct sockaddr_in6 { struct in6_addr sin6_addr; /* IPv6 address */ __u32 sin6_scope_id; /* scope id (new in RFC2553) */ }; +#endif /* __UAPI_DEF_SOCKADDR_IN6 */ +#if __UAPI_DEF_IPV6_MREQ struct ipv6_mreq { /* IPv6 multicast address of group */ struct in6_addr ipv6mr_multiaddr; @@ -53,6 +63,7 @@ struct ipv6_mreq { /* local IPv6 address of interface */ int ipv6mr_ifindex; }; +#endif /* __UAPI_DEF_IVP6_MREQ */ #define ipv6mr_acaddr ipv6mr_multiaddr @@ -114,13 +125,24 @@ struct in6_flowlabel_req { /* * IPV6 extension headers */ -#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ -#define IPPROTO_ROUTING 43 /* IPv6 routing header */ -#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ -#define IPPROTO_ICMPV6 58 /* ICMPv6 */ -#define IPPROTO_NONE 59 /* IPv6 no next header */ -#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ -#define IPPROTO_MH 135 /* IPv6 mobility header */ +#if __UAPI_DEF_IPPROTO_V6 +enum { + IPPROTO_HOPOPTS = 0, /* IPv6 hop-by-hop options */ +#define IPPROTO_HOPOPTS IPPROTO_HOPOPTS + IPPROTO_ROUTING = 43, /* IPv6 routing header */ +#define IPPROTO_ROUTING IPPROTO_ROUTING + IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header */ +#define IPPROTO_FRAGMENT IPPROTO_FRAGMENT + IPPROTO_ICMPV6 = 58, /* ICMPv6 */ +#define IPPROTO_ICMPV6 IPPROTO_ICMPV6 + IPPROTO_NONE = 59, /* IPv6 no next header */ +#define IPPROTO_NONE IPPROTO_NONE + IPPROTO_DSTOPTS = 60, /* IPv6 destination options */ +#define IPPROTO_DSTOPTS IPPROTO_DSTOPTS + IPPROTO_MH = 135, /* IPv6 mobility header */ +#define IPPROTO_MH IPPROTO_MH +}; +#endif /* __UAPI_DEF_IPPROTO_V6 */ /* * IPv6 TLV options. diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index 2fb6fae..d08abf9 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -508,11 +508,15 @@ struct input_keymap_entry { #define BTN_DEAD 0x12f #define BTN_GAMEPAD 0x130 -#define BTN_A 0x130 -#define BTN_B 0x131 +#define BTN_SOUTH 0x130 +#define BTN_A BTN_SOUTH +#define BTN_EAST 0x131 +#define BTN_B BTN_EAST #define BTN_C 0x132 -#define BTN_X 0x133 -#define BTN_Y 0x134 +#define BTN_NORTH 0x133 +#define BTN_X BTN_NORTH +#define BTN_WEST 0x134 +#define BTN_Y BTN_WEST #define BTN_Z 0x135 #define BTN_TL 0x136 #define BTN_TR 0x137 @@ -709,6 +713,11 @@ struct input_keymap_entry { #define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */ #define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */ +#define BTN_DPAD_UP 0x220 +#define BTN_DPAD_DOWN 0x221 +#define BTN_DPAD_LEFT 0x222 +#define BTN_DPAD_RIGHT 0x223 + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h index 6cf06bf..4119594 100644 --- a/include/uapi/linux/ip.h +++ b/include/uapi/linux/ip.h @@ -133,4 +133,40 @@ struct ip_beet_phdr { __u8 reserved; }; +/* index values for the variables in ipv4_devconf */ +enum +{ + IPV4_DEVCONF_FORWARDING=1, + IPV4_DEVCONF_MC_FORWARDING, + IPV4_DEVCONF_PROXY_ARP, + IPV4_DEVCONF_ACCEPT_REDIRECTS, + IPV4_DEVCONF_SECURE_REDIRECTS, + IPV4_DEVCONF_SEND_REDIRECTS, + IPV4_DEVCONF_SHARED_MEDIA, + IPV4_DEVCONF_RP_FILTER, + IPV4_DEVCONF_ACCEPT_SOURCE_ROUTE, + IPV4_DEVCONF_BOOTP_RELAY, + IPV4_DEVCONF_LOG_MARTIANS, + IPV4_DEVCONF_TAG, + IPV4_DEVCONF_ARPFILTER, + IPV4_DEVCONF_MEDIUM_ID, + IPV4_DEVCONF_NOXFRM, + IPV4_DEVCONF_NOPOLICY, + IPV4_DEVCONF_FORCE_IGMP_VERSION, + IPV4_DEVCONF_ARP_ANNOUNCE, + IPV4_DEVCONF_ARP_IGNORE, + IPV4_DEVCONF_PROMOTE_SECONDARIES, + IPV4_DEVCONF_ARP_ACCEPT, + IPV4_DEVCONF_ARP_NOTIFY, + IPV4_DEVCONF_ACCEPT_LOCAL, + IPV4_DEVCONF_SRC_VMARK, + IPV4_DEVCONF_PROXY_ARP_PVLAN, + IPV4_DEVCONF_ROUTE_LOCALNET, + IPV4_DEVCONF_IGMPV2_UNSOLICITED_REPORT_INTERVAL, + IPV4_DEVCONF_IGMPV3_UNSOLICITED_REPORT_INTERVAL, + __IPV4_DEVCONF_MAX +}; + +#define IPV4_DEVCONF_MAX (__IPV4_DEVCONF_MAX - 1) + #endif /* _UAPI_LINUX_IP_H */ diff --git a/include/uapi/linux/ip_vs.h b/include/uapi/linux/ip_vs.h index a245377..2945822 100644 --- a/include/uapi/linux/ip_vs.h +++ b/include/uapi/linux/ip_vs.h @@ -20,6 +20,12 @@ #define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */ #define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */ #define IP_VS_SVC_F_ONEPACKET 0x0004 /* one-packet scheduling */ +#define IP_VS_SVC_F_SCHED1 0x0008 /* scheduler flag 1 */ +#define IP_VS_SVC_F_SCHED2 0x0010 /* scheduler flag 2 */ +#define IP_VS_SVC_F_SCHED3 0x0020 /* scheduler flag 3 */ + +#define IP_VS_SVC_F_SCHED_SH_FALLBACK IP_VS_SVC_F_SCHED1 /* SH fallback */ +#define IP_VS_SVC_F_SCHED_SH_PORT IP_VS_SVC_F_SCHED2 /* SH use port */ /* * Destination Server Flags diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 4bda4cf..593b0e3 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -160,6 +160,9 @@ enum { DEVCONF_ACCEPT_DAD, DEVCONF_FORCE_TLLAO, DEVCONF_NDISC_NOTIFY, + DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL, + DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL, + DEVCONF_SUPPRESS_FRAG_NDISC, DEVCONF_MAX }; diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index a5c86fc..99c2533 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -666,6 +666,8 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_IRQ_MPIC 90 #define KVM_CAP_PPC_RTAS 91 #define KVM_CAP_IRQ_XICS 92 +#define KVM_CAP_ARM_EL1_32BIT 93 +#define KVM_CAP_SPAPR_MULTITCE 94 #ifdef KVM_CAP_IRQ_ROUTING @@ -783,6 +785,8 @@ struct kvm_dirty_tlb { #define KVM_REG_IA64 0x3000000000000000ULL #define KVM_REG_ARM 0x4000000000000000ULL #define KVM_REG_S390 0x5000000000000000ULL +#define KVM_REG_ARM64 0x6000000000000000ULL +#define KVM_REG_MIPS 0x7000000000000000ULL #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h index cea2c5c..2841f86 100644 --- a/include/uapi/linux/kvm_para.h +++ b/include/uapi/linux/kvm_para.h @@ -19,6 +19,7 @@ #define KVM_HC_MMU_OP 2 #define KVM_HC_FEATURES 3 #define KVM_HC_PPC_MAP_MAGIC_PAGE 4 +#define KVM_HC_KICK_CPU 5 /* * hypercalls use architecture specific diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h new file mode 100644 index 0000000..335e8a7 --- /dev/null +++ b/include/uapi/linux/libc-compat.h @@ -0,0 +1,103 @@ +/* + * Compatibility interface for userspace libc header coordination: + * + * Define compatibility macros that are used to control the inclusion or + * exclusion of UAPI structures and definitions in coordination with another + * userspace C library. + * + * This header is intended to solve the problem of UAPI definitions that + * conflict with userspace definitions. If a UAPI header has such conflicting + * definitions then the solution is as follows: + * + * * Synchronize the UAPI header and the libc headers so either one can be + * used and such that the ABI is preserved. If this is not possible then + * no simple compatibility interface exists (you need to write translating + * wrappers and rename things) and you can't use this interface. + * + * Then follow this process: + * + * (a) Include libc-compat.h in the UAPI header. + * e.g. #include <linux/libc-compat.h> + * This include must be as early as possible. + * + * (b) In libc-compat.h add enough code to detect that the comflicting + * userspace libc header has been included first. + * + * (c) If the userspace libc header has been included first define a set of + * guard macros of the form __UAPI_DEF_FOO and set their values to 1, else + * set their values to 0. + * + * (d) Back in the UAPI header with the conflicting definitions, guard the + * definitions with: + * #if __UAPI_DEF_FOO + * ... + * #endif + * + * This fixes the situation where the linux headers are included *after* the + * libc headers. To fix the problem with the inclusion in the other order the + * userspace libc headers must be fixed like this: + * + * * For all definitions that conflict with kernel definitions wrap those + * defines in the following: + * #if !__UAPI_DEF_FOO + * ... + * #endif + * + * This prevents the redefinition of a construct already defined by the kernel. + */ +#ifndef _UAPI_LIBC_COMPAT_H +#define _UAPI_LIBC_COMPAT_H + +/* We have included glibc headers... */ +#if defined(__GLIBC__) + +/* Coordinate with glibc netinet/in.h header. */ +#if defined(_NETINET_IN_H) + +/* GLIBC headers included first so don't define anything + * that would already be defined. */ +#define __UAPI_DEF_IN6_ADDR 0 +/* The exception is the in6_addr macros which must be defined + * if the glibc code didn't define them. This guard matches + * the guard in glibc/inet/netinet/in.h which defines the + * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */ +#if defined(__USE_MISC) || defined (__USE_GNU) +#define __UAPI_DEF_IN6_ADDR_ALT 0 +#else +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#endif +#define __UAPI_DEF_SOCKADDR_IN6 0 +#define __UAPI_DEF_IPV6_MREQ 0 +#define __UAPI_DEF_IPPROTO_V6 0 + +#else + +/* Linux headers included first, and we must define everything + * we need. The expectation is that glibc will check the + * __UAPI_DEF_* defines and adjust appropriately. */ +#define __UAPI_DEF_IN6_ADDR 1 +/* We unconditionally define the in6_addr macros and glibc must + * coordinate. */ +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#define __UAPI_DEF_IPV6_MREQ 1 +#define __UAPI_DEF_IPPROTO_V6 1 + +#endif /* _NETINET_IN_H */ + + +/* If we did not see any headers from any supported C libraries, + * or we are being included in the kernel, then define everything + * that we need. */ +#else /* !defined(__GLIBC__) */ + +/* Definitions for in6.h */ +#define __UAPI_DEF_IN6_ADDR 1 +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#define __UAPI_DEF_IPV6_MREQ 1 +#define __UAPI_DEF_IPPROTO_V6 1 + +#endif /* __GLIBC__ */ + +#endif /* _UAPI_LIBC_COMPAT_H */ diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h index f055e58..e284ff9 100644 --- a/include/uapi/linux/msdos_fs.h +++ b/include/uapi/linux/msdos_fs.h @@ -104,6 +104,8 @@ struct __fat_dirent { /* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */ #define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32) #define FAT_IOCTL_SET_ATTRIBUTES _IOW('r', 0x11, __u32) +/*Android kernel has used 0x12, so we use 0x13*/ +#define FAT_IOCTL_GET_VOLUME_ID _IOR('r', 0x13, __u32) struct fat_boot_sector { __u8 ignored[3]; /* Boot strap short or near jump */ @@ -128,6 +130,10 @@ struct fat_boot_sector { __u8 drive_number; /* Physical drive number */ __u8 state; /* undocumented, but used for mount state. */ + __u8 signature; /* extended boot signature */ + __u8 vol_id[4]; /* volume ID */ + __u8 vol_label[11]; /* volume label */ + __u8 fs_type[8]; /* file system type */ /* other fiealds are not added here */ } fat16; @@ -147,6 +153,10 @@ struct fat_boot_sector { __u8 drive_number; /* Physical drive number */ __u8 state; /* undocumented, but used for mount state. */ + __u8 signature; /* extended boot signature */ + __u8 vol_id[4]; /* volume ID */ + __u8 vol_label[11]; /* volume label */ + __u8 fs_type[8]; /* file system type */ /* other fiealds are not added here */ } fat32; }; diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild index 4111577..1749154 100644 --- a/include/uapi/linux/netfilter/Kbuild +++ b/include/uapi/linux/netfilter/Kbuild @@ -22,6 +22,7 @@ header-y += xt_CONNMARK.h header-y += xt_CONNSECMARK.h header-y += xt_CT.h header-y += xt_DSCP.h +header-y += xt_HMARK.h header-y += xt_IDLETIMER.h header-y += xt_LED.h header-y += xt_LOG.h @@ -68,6 +69,7 @@ header-y += xt_quota.h header-y += xt_rateest.h header-y += xt_realm.h header-y += xt_recent.h +header-y += xt_rpfilter.h header-y += xt_sctp.h header-y += xt_set.h header-y += xt_socket.h diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h index d69483f..8dd8038 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_common.h +++ b/include/uapi/linux/netfilter/nf_conntrack_common.h @@ -99,7 +99,8 @@ enum ip_conntrack_events { IPCT_PROTOINFO, /* protocol information has changed */ IPCT_HELPER, /* new helper has been set */ IPCT_MARK, /* new mark has been set */ - IPCT_NATSEQADJ, /* NAT is doing sequence adjustment */ + IPCT_SEQADJ, /* sequence adjustment has changed */ + IPCT_NATSEQADJ = IPCT_SEQADJ, IPCT_SECMARK, /* new security mark has been set */ IPCT_LABEL, /* new connlabel has been set */ }; diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 08fabc6..acad6c5 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -42,8 +42,10 @@ enum ctattr_type { CTA_ID, CTA_NAT_DST, CTA_TUPLE_MASTER, - CTA_NAT_SEQ_ADJ_ORIG, - CTA_NAT_SEQ_ADJ_REPLY, + CTA_SEQ_ADJ_ORIG, + CTA_NAT_SEQ_ADJ_ORIG = CTA_SEQ_ADJ_ORIG, + CTA_SEQ_ADJ_REPLY, + CTA_NAT_SEQ_ADJ_REPLY = CTA_SEQ_ADJ_REPLY, CTA_SECMARK, /* obsolete */ CTA_ZONE, CTA_SECCTX, @@ -165,6 +167,15 @@ enum ctattr_protonat { }; #define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1) +enum ctattr_seqadj { + CTA_SEQADJ_UNSPEC, + CTA_SEQADJ_CORRECTION_POS, + CTA_SEQADJ_OFFSET_BEFORE, + CTA_SEQADJ_OFFSET_AFTER, + __CTA_SEQADJ_MAX +}; +#define CTA_SEQADJ_MAX (__CTA_SEQADJ_MAX - 1) + enum ctattr_natseq { CTA_NAT_SEQ_UNSPEC, CTA_NAT_SEQ_CORRECTION_POS, diff --git a/include/uapi/linux/netfilter/nfnetlink_queue.h b/include/uapi/linux/netfilter/nfnetlink_queue.h index a2308ae..0132bad 100644 --- a/include/uapi/linux/netfilter/nfnetlink_queue.h +++ b/include/uapi/linux/netfilter/nfnetlink_queue.h @@ -46,6 +46,7 @@ enum nfqnl_attr_type { NFQA_CT_INFO, /* enum ip_conntrack_info */ NFQA_CAP_LEN, /* __u32 length of captured packet */ NFQA_SKB_INFO, /* __u32 skb meta information */ + NFQA_EXP, /* nf_conntrack_netlink.h */ __NFQA_MAX }; @@ -105,5 +106,7 @@ enum nfqnl_attr_config { #define NFQA_SKB_CSUMNOTREADY (1 << 0) /* packet is GSO (i.e., exceeds device mtu) */ #define NFQA_SKB_GSO (1 << 1) +/* csum not validated (incoming device doesn't support hw checksum, etc.) */ +#define NFQA_SKB_CSUM_NOTVERIFIED (1 << 2) #endif /* _NFNETLINK_QUEUE_H */ diff --git a/include/uapi/linux/netfilter/xt_HMARK.h b/include/uapi/linux/netfilter/xt_HMARK.h new file mode 100644 index 0000000..826fc58 --- /dev/null +++ b/include/uapi/linux/netfilter/xt_HMARK.h @@ -0,0 +1,50 @@ +#ifndef XT_HMARK_H_ +#define XT_HMARK_H_ + +#include <linux/types.h> + +enum { + XT_HMARK_SADDR_MASK, + XT_HMARK_DADDR_MASK, + XT_HMARK_SPI, + XT_HMARK_SPI_MASK, + XT_HMARK_SPORT, + XT_HMARK_DPORT, + XT_HMARK_SPORT_MASK, + XT_HMARK_DPORT_MASK, + XT_HMARK_PROTO_MASK, + XT_HMARK_RND, + XT_HMARK_MODULUS, + XT_HMARK_OFFSET, + XT_HMARK_CT, + XT_HMARK_METHOD_L3, + XT_HMARK_METHOD_L3_4, +}; +#define XT_HMARK_FLAG(flag) (1 << flag) + +union hmark_ports { + struct { + __u16 src; + __u16 dst; + } p16; + struct { + __be16 src; + __be16 dst; + } b16; + __u32 v32; + __be32 b32; +}; + +struct xt_hmark_info { + union nf_inet_addr src_mask; + union nf_inet_addr dst_mask; + union hmark_ports port_mask; + union hmark_ports port_set; + __u32 flags; + __u16 proto_mask; + __u32 hashrnd; + __u32 hmodulus; + __u32 hoffset; /* Mark offset to start from */ +}; + +#endif /* XT_HMARK_H_ */ diff --git a/include/uapi/linux/netfilter/xt_SYNPROXY.h b/include/uapi/linux/netfilter/xt_SYNPROXY.h new file mode 100644 index 0000000..2d59fba --- /dev/null +++ b/include/uapi/linux/netfilter/xt_SYNPROXY.h @@ -0,0 +1,16 @@ +#ifndef _XT_SYNPROXY_H +#define _XT_SYNPROXY_H + +#define XT_SYNPROXY_OPT_MSS 0x01 +#define XT_SYNPROXY_OPT_WSCALE 0x02 +#define XT_SYNPROXY_OPT_SACK_PERM 0x04 +#define XT_SYNPROXY_OPT_TIMESTAMP 0x08 +#define XT_SYNPROXY_OPT_ECN 0x10 + +struct xt_synproxy_info { + __u8 options; + __u8 wscale; + __u16 mss; +}; + +#endif /* _XT_SYNPROXY_H */ diff --git a/include/uapi/linux/netfilter/xt_rpfilter.h b/include/uapi/linux/netfilter/xt_rpfilter.h new file mode 100644 index 0000000..8358d4f --- /dev/null +++ b/include/uapi/linux/netfilter/xt_rpfilter.h @@ -0,0 +1,23 @@ +#ifndef _XT_RPATH_H +#define _XT_RPATH_H + +#include <linux/types.h> + +enum { + XT_RPFILTER_LOOSE = 1 << 0, + XT_RPFILTER_VALID_MARK = 1 << 1, + XT_RPFILTER_ACCEPT_LOCAL = 1 << 2, + XT_RPFILTER_INVERT = 1 << 3, +#ifdef __KERNEL__ + XT_RPFILTER_OPTION_MASK = XT_RPFILTER_LOOSE | + XT_RPFILTER_VALID_MARK | + XT_RPFILTER_ACCEPT_LOCAL | + XT_RPFILTER_INVERT, +#endif +}; + +struct xt_rpfilter_info { + __u8 flags; +}; + +#endif diff --git a/include/uapi/linux/netfilter/xt_socket.h b/include/uapi/linux/netfilter/xt_socket.h index 26d7217..6315e2a 100644 --- a/include/uapi/linux/netfilter/xt_socket.h +++ b/include/uapi/linux/netfilter/xt_socket.h @@ -5,10 +5,17 @@ enum { XT_SOCKET_TRANSPARENT = 1 << 0, + XT_SOCKET_NOWILDCARD = 1 << 1, }; struct xt_socket_mtinfo1 { __u8 flags; }; +#define XT_SOCKET_FLAGS_V1 XT_SOCKET_TRANSPARENT + +struct xt_socket_mtinfo2 { + __u8 flags; +}; +#define XT_SOCKET_FLAGS_V2 (XT_SOCKET_TRANSPARENT | XT_SOCKET_NOWILDCARD) #endif /* _XT_SOCKET_H */ diff --git a/include/uapi/linux/netfilter_bridge/ebt_802_3.h b/include/uapi/linux/netfilter_bridge/ebt_802_3.h index 5bf8491..f37522a 100644 --- a/include/uapi/linux/netfilter_bridge/ebt_802_3.h +++ b/include/uapi/linux/netfilter_bridge/ebt_802_3.h @@ -2,6 +2,7 @@ #define _UAPI__LINUX_BRIDGE_EBT_802_3_H #include <linux/types.h> +#include <linux/if_ether.h> #define EBT_802_3_SAP 0x01 #define EBT_802_3_TYPE 0x02 @@ -42,8 +43,8 @@ struct hdr_ni { }; struct ebt_802_3_hdr { - __u8 daddr[6]; - __u8 saddr[6]; + __u8 daddr[ETH_ALEN]; + __u8 saddr[ETH_ALEN]; __be16 len; union { struct hdr_ui ui; diff --git a/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h b/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h index c6a204c..eac0f65 100644 --- a/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h +++ b/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h @@ -2,6 +2,7 @@ #define _IPT_CLUSTERIP_H_target #include <linux/types.h> +#include <linux/if_ether.h> enum clusterip_hashmode { CLUSTERIP_HASHMODE_SIP = 0, @@ -22,7 +23,7 @@ struct ipt_clusterip_tgt_info { __u32 flags; /* only relevant for new ones */ - __u8 clustermac[6]; + __u8 clustermac[ETH_ALEN]; __u16 num_total_nodes; __u16 num_local_nodes; __u16 local_nodes[CLUSTERIP_MAX_NODES]; diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 7c6f627..29bed72 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -69,6 +69,22 @@ * starting a poll from a device which has a secure element enabled means * we want to do SE based card emulation. * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element. + * @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform + * that some firmware was loaded + * @NFC_EVENT_SE_ADDED: Event emitted when a new secure element is discovered. + * This typically will be sent whenever a new NFC controller with either + * an embedded SE or an UICC one connected to it through SWP. + * @NFC_EVENT_SE_REMOVED: Event emitted when a secure element is removed from + * the system, as a consequence of e.g. an NFC controller being unplugged. + * @NFC_EVENT_SE_CONNECTIVITY: This event is emitted whenever a secure element + * is requesting connectivity access. For example a UICC SE may need to + * talk with a sleeping modem and will notify this need by sending this + * event. It is then up to userspace to decide if it will wake the modem + * up or not. + * @NFC_EVENT_SE_TRANSACTION: This event is sent when an application running on + * a specific SE notifies us about the end of a transaction. The parameter + * for this event is the application ID (AID). + * @NFC_CMD_GET_SE: Dump all discovered secure elements from an NFC controller. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -92,6 +108,12 @@ enum nfc_commands { NFC_CMD_DISABLE_SE, NFC_CMD_LLC_SDREQ, NFC_EVENT_LLC_SDRES, + NFC_CMD_FW_DOWNLOAD, + NFC_EVENT_SE_ADDED, + NFC_EVENT_SE_REMOVED, + NFC_EVENT_SE_CONNECTIVITY, + NFC_EVENT_SE_TRANSACTION, + NFC_CMD_GET_SE, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -121,6 +143,10 @@ enum nfc_commands { * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter * @NFC_ATTR_SE: Available Secure Elements + * @NFC_ATTR_FIRMWARE_NAME: Free format firmware version + * @NFC_ATTR_SE_INDEX: Secure element index + * @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED) + * @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -143,6 +169,11 @@ enum nfc_attrs { NFC_ATTR_LLC_PARAM_MIUX, NFC_ATTR_SE, NFC_ATTR_LLC_SDP, + NFC_ATTR_FIRMWARE_NAME, + NFC_ATTR_SE_INDEX, + NFC_ATTR_SE_TYPE, + NFC_ATTR_SE_AID, + NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; @@ -159,9 +190,12 @@ enum nfc_sdp_attr { #define NFC_DEVICE_NAME_MAXSIZE 8 #define NFC_NFCID1_MAXSIZE 10 +#define NFC_NFCID2_MAXSIZE 8 +#define NFC_NFCID3_MAXSIZE 10 #define NFC_SENSB_RES_MAXSIZE 12 #define NFC_SENSF_RES_MAXSIZE 18 #define NFC_GB_MAXSIZE 48 +#define NFC_FIRMWARE_NAME_MAXSIZE 32 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 @@ -191,10 +225,12 @@ enum nfc_sdp_attr { #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) /* NFC Secure Elements */ -#define NFC_SE_NONE 0x0 #define NFC_SE_UICC 0x1 #define NFC_SE_EMBEDDED 0x2 +#define NFC_SE_DISABLED 0x0 +#define NFC_SE_ENABLED 0x1 + struct sockaddr_nfc { sa_family_t sa_family; __u32 dev_idx; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d1e48b5..fde2c02 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -27,6 +27,8 @@ #include <linux/types.h> +#define NL80211_GENL_NAME "nl80211" + /** * DOC: Station handling * @@ -124,6 +126,31 @@ */ /** + * DOC: packet coalesce support + * + * In most cases, host that receives IPv4 and IPv6 multicast/broadcast + * packets does not do anything with these packets. Therefore the + * reception of these unwanted packets causes unnecessary processing + * and power consumption. + * + * Packet coalesce feature helps to reduce number of received interrupts + * to host by buffering these packets in firmware/hardware for some + * predefined time. Received interrupt will be generated when one of the + * following events occur. + * a) Expiration of hardware timer whose expiration time is set to maximum + * coalescing delay of matching coalesce rule. + * b) Coalescing buffer in hardware reaches it's limit. + * c) Packet doesn't match any of the configured coalesce rules. + * + * User needs to configure following parameters for creating a coalesce + * rule. + * a) Maximum coalescing delay + * b) List of packet patterns which needs to be matched + * c) Condition for coalescence. pattern 'match' or 'no match' + * Multiple such rules can be created. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -646,6 +673,19 @@ * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can * return back to normal. * + * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. + * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. + * + * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the + * the new channel information (Channel Switch Announcement - CSA) + * in the beacon for some time (as defined in the + * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the + * new channel. Userspace provides the new channel information (using + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel + * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform + * other station that transmission must be blocked until the channel + * switch is complete. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -808,6 +848,11 @@ enum nl80211_commands { NL80211_CMD_CRIT_PROTOCOL_START, NL80211_CMD_CRIT_PROTOCOL_STOP, + NL80211_CMD_GET_COALESCE, + NL80211_CMD_SET_COALESCE, + + NL80211_CMD_CHANNEL_SWITCH, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1429,6 +1474,28 @@ enum nl80211_commands { * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which * the connection should have increased reliability (u16). * + * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). + * This is similar to @NL80211_ATTR_STA_AID but with a difference of being + * allowed to be used with the first @NL80211_CMD_SET_STATION command to + * update a TDLS peer STA entry. + * + * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. + * + * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's + * until the channel switch event. + * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission + * must be blocked on the current channel (before the channel switch + * operation). + * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information + * for the time while performing a channel switch. + * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter + * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter + * field in the probe response (%NL80211_ATTR_PROBE_RESP). + * + * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. + * As specified in the &enum nl80211_rxmgmt_flags. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1727,6 +1794,18 @@ enum nl80211_attrs { NL80211_ATTR_CRIT_PROT_ID, NL80211_ATTR_MAX_CRIT_PROT_DURATION, + NL80211_ATTR_PEER_AID, + + NL80211_ATTR_COALESCE_RULE, + + NL80211_ATTR_CH_SWITCH_COUNT, + NL80211_ATTR_CH_SWITCH_BLOCK_TX, + NL80211_ATTR_CSA_IES, + NL80211_ATTR_CSA_C_OFF_BEACON, + NL80211_ATTR_CSA_C_OFF_PRESP, + + NL80211_ATTR_RXMGMT_FLAGS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1991,6 +2070,10 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards * non-peer STA + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU + * Contains a nested array of signal strength attributes (u8, dBm) + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2020,6 +2103,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_NONPEER_PM, NL80211_STA_INFO_RX_BYTES64, NL80211_STA_INFO_TX_BYTES64, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2413,6 +2498,8 @@ enum nl80211_survey_info { * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. * overrides all other flags. + * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address + * and ACK incoming unicast packets. * * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag @@ -2424,6 +2511,7 @@ enum nl80211_mntr_flags { NL80211_MNTR_FLAG_CONTROL, NL80211_MNTR_FLAG_OTHER_BSS, NL80211_MNTR_FLAG_COOK_FRAMES, + NL80211_MNTR_FLAG_ACTIVE, /* keep last */ __NL80211_MNTR_FLAG_AFTER_LAST, @@ -2559,6 +2647,10 @@ enum nl80211_mesh_power_mode { * * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) * + * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've + * established peering with for longer than this time (in seconds), then + * remove it from the STA's list of peers. Default is 30 minutes. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2590,6 +2682,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, NL80211_MESHCONF_POWER_MODE, NL80211_MESHCONF_AWAKE_WINDOW, + NL80211_MESHCONF_PLINK_TIMEOUT, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2637,6 +2730,10 @@ enum nl80211_meshconf_params { * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will * implement an MPM which handles peer allocation and state. * + * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication + * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). + * Default is no authentication method required. + * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use @@ -2650,6 +2747,7 @@ enum nl80211_mesh_setup_params { NL80211_MESH_SETUP_USERSPACE_AMPE, NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, NL80211_MESH_SETUP_USERSPACE_MPM, + NL80211_MESH_SETUP_AUTH_PROTOCOL, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, @@ -2730,6 +2828,8 @@ enum nl80211_channel_type { * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 * attribute must be provided as well + * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel + * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel */ enum nl80211_chan_width { NL80211_CHAN_WIDTH_20_NOHT, @@ -2738,6 +2838,23 @@ enum nl80211_chan_width { NL80211_CHAN_WIDTH_80, NL80211_CHAN_WIDTH_80P80, NL80211_CHAN_WIDTH_160, + NL80211_CHAN_WIDTH_5, + NL80211_CHAN_WIDTH_10, +}; + +/** + * enum nl80211_bss_scan_width - control channel width for a BSS + * + * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. + * + * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible + * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide + * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + */ +enum nl80211_bss_scan_width { + NL80211_BSS_CHAN_WIDTH_20, + NL80211_BSS_CHAN_WIDTH_10, + NL80211_BSS_CHAN_WIDTH_5, }; /** @@ -2764,6 +2881,8 @@ enum nl80211_chan_width { * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information * elements from a Beacon frame (bin); not present if no Beacon frame has * yet been received + * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel + * (u32, enum nl80211_bss_scan_width) * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -2780,6 +2899,7 @@ enum nl80211_bss { NL80211_BSS_STATUS, NL80211_BSS_SEEN_MS_AGO, NL80211_BSS_BEACON_IES, + NL80211_BSS_CHAN_WIDTH, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -3028,11 +3148,11 @@ enum nl80211_tx_power_setting { }; /** - * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute - * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has + * enum nl80211_packet_pattern_attr - packet pattern attribute + * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has * a zero bit are ignored - * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have + * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have * a bit for each byte in the pattern. The lowest-order bit corresponds * to the first byte of the pattern, but the bytes of the pattern are * in a little-endian-like format, i.e. the 9th byte of the pattern @@ -3043,39 +3163,50 @@ enum nl80211_tx_power_setting { * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. - * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after + * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after * these fixed number of bytes of received packet - * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes - * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number + * @NUM_NL80211_PKTPAT: number of attributes + * @MAX_NL80211_PKTPAT: max attribute number */ -enum nl80211_wowlan_packet_pattern_attr { - __NL80211_WOWLAN_PKTPAT_INVALID, - NL80211_WOWLAN_PKTPAT_MASK, - NL80211_WOWLAN_PKTPAT_PATTERN, - NL80211_WOWLAN_PKTPAT_OFFSET, +enum nl80211_packet_pattern_attr { + __NL80211_PKTPAT_INVALID, + NL80211_PKTPAT_MASK, + NL80211_PKTPAT_PATTERN, + NL80211_PKTPAT_OFFSET, - NUM_NL80211_WOWLAN_PKTPAT, - MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, + NUM_NL80211_PKTPAT, + MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, }; /** - * struct nl80211_wowlan_pattern_support - pattern support information + * struct nl80211_pattern_support - packet pattern support information * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when - * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the - * capability information given by the kernel to userspace. + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in + * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of + * %NL80211_ATTR_COALESCE_RULE in the capability information given + * by the kernel to userspace. */ -struct nl80211_wowlan_pattern_support { +struct nl80211_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; __u32 max_pkt_offset; } __attribute__((packed)); +/* only for backward compatibility */ +#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID +#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK +#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN +#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET +#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT +#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT +#define nl80211_wowlan_pattern_support nl80211_pattern_support + /** * enum nl80211_wowlan_triggers - WoWLAN trigger definitions * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes @@ -3095,7 +3226,7 @@ struct nl80211_wowlan_pattern_support { * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute - * carrying a &struct nl80211_wowlan_pattern_support. + * carrying a &struct nl80211_pattern_support. * * When reporting wakeup. it is a u32 attribute containing the 0-based * index of the pattern that caused the wakeup, in the patterns passed @@ -3252,7 +3383,7 @@ struct nl80211_wowlan_tcp_data_token_feature { * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a * u32 attribute holding the maximum length * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for - * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK + * feature advertising. The mask works like @NL80211_PKTPAT_MASK * but on the TCP payload only. * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes * @MAX_NL80211_WOWLAN_TCP: highest attribute number @@ -3277,6 +3408,55 @@ enum nl80211_wowlan_tcp_attrs { }; /** + * struct nl80211_coalesce_rule_support - coalesce rule support information + * @max_rules: maximum number of rules supported + * @pat: packet pattern support information + * @max_delay: maximum supported coalescing delay in msecs + * + * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the + * capability information given by the kernel to userspace. + */ +struct nl80211_coalesce_rule_support { + __u32 max_rules; + struct nl80211_pattern_support pat; + __u32 max_delay; +} __attribute__((packed)); + +/** + * enum nl80211_attr_coalesce_rule - coalesce rule attribute + * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute + * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing + * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, + * see &enum nl80211_coalesce_condition. + * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched + * after these fixed number of bytes of received packet + * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes + * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number + */ +enum nl80211_attr_coalesce_rule { + __NL80211_COALESCE_RULE_INVALID, + NL80211_ATTR_COALESCE_RULE_DELAY, + NL80211_ATTR_COALESCE_RULE_CONDITION, + NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, + + /* keep last */ + NUM_NL80211_ATTR_COALESCE_RULE, + NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 +}; + +/** + * enum nl80211_coalesce_condition - coalesce rule conditions + * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns + * in a rule are matched. + * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns + * in a rule are not matched. + */ +enum nl80211_coalesce_condition { + NL80211_COALESCE_CONDITION_MATCH, + NL80211_COALESCE_CONDITION_NO_MATCH +}; + +/** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that @@ -3556,6 +3736,10 @@ enum nl80211_ap_sme_features { * Peering Management entity which may be implemented by registering for * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is * still generated by the driver. + * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor + * interface. An active monitor interface behaves like a normal monitor + * interface, but gets added to the driver. It ensures that incoming + * unicast packets directed at the configured interface address get ACKed. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3575,6 +3759,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, NL80211_FEATURE_USERSPACE_MPM = 1 << 16, + NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, }; /** @@ -3721,4 +3906,15 @@ enum nl80211_crit_proto_id { /* maximum duration for critical protocol measures */ #define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ +/** + * enum nl80211_rxmgmt_flags - flags for received management frame. + * + * Used by cfg80211_rx_mgmt() + * + * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. + */ +enum nl80211_rxmgmt_flags { + NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index 405918d..a74d375 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -1,6 +1,6 @@ /* - * Copyright (c) 2007-2011 Nicira Networks. + * Copyright (c) 2007-2013 Nicira, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of version 2 of the GNU General Public @@ -164,6 +164,8 @@ enum ovs_vport_type { OVS_VPORT_TYPE_UNSPEC, OVS_VPORT_TYPE_NETDEV, /* network device */ OVS_VPORT_TYPE_INTERNAL, /* network device implemented by datapath */ + OVS_VPORT_TYPE_GRE, /* GRE tunnel. */ + OVS_VPORT_TYPE_VXLAN, /* VXLAN tunnel. */ __OVS_VPORT_TYPE_MAX }; @@ -192,7 +194,6 @@ enum ovs_vport_type { * optional; if not specified a free port number is automatically selected. * Whether %OVS_VPORT_ATTR_OPTIONS is required or optional depends on the type * of vport. - * and other attributes are ignored. * * For other requests, if %OVS_VPORT_ATTR_NAME is specified then it is used to * look up the vport to operate on; otherwise dp_idx from the &struct @@ -211,6 +212,16 @@ enum ovs_vport_attr { #define OVS_VPORT_ATTR_MAX (__OVS_VPORT_ATTR_MAX - 1) +/* OVS_VPORT_ATTR_OPTIONS attributes for tunnels. + */ +enum { + OVS_TUNNEL_ATTR_UNSPEC, + OVS_TUNNEL_ATTR_DST_PORT, /* 16-bit UDP port, used by L4 tunnels. */ + __OVS_TUNNEL_ATTR_MAX +}; + +#define OVS_TUNNEL_ATTR_MAX (__OVS_TUNNEL_ATTR_MAX - 1) + /* Flows. */ #define OVS_FLOW_FAMILY "ovs_flow" @@ -247,11 +258,30 @@ enum ovs_key_attr { OVS_KEY_ATTR_ARP, /* struct ovs_key_arp */ OVS_KEY_ATTR_ND, /* struct ovs_key_nd */ OVS_KEY_ATTR_SKB_MARK, /* u32 skb mark */ + OVS_KEY_ATTR_TUNNEL, /* Nested set of ovs_tunnel attributes */ + OVS_KEY_ATTR_SCTP, /* struct ovs_key_sctp */ + +#ifdef __KERNEL__ + OVS_KEY_ATTR_IPV4_TUNNEL, /* struct ovs_key_ipv4_tunnel */ +#endif __OVS_KEY_ATTR_MAX }; #define OVS_KEY_ATTR_MAX (__OVS_KEY_ATTR_MAX - 1) +enum ovs_tunnel_key_attr { + OVS_TUNNEL_KEY_ATTR_ID, /* be64 Tunnel ID */ + OVS_TUNNEL_KEY_ATTR_IPV4_SRC, /* be32 src IP address. */ + OVS_TUNNEL_KEY_ATTR_IPV4_DST, /* be32 dst IP address. */ + OVS_TUNNEL_KEY_ATTR_TOS, /* u8 Tunnel IP ToS. */ + OVS_TUNNEL_KEY_ATTR_TTL, /* u8 Tunnel IP TTL. */ + OVS_TUNNEL_KEY_ATTR_DONT_FRAGMENT, /* No argument, set DF. */ + OVS_TUNNEL_KEY_ATTR_CSUM, /* No argument. CSUM packet. */ + __OVS_TUNNEL_KEY_ATTR_MAX +}; + +#define OVS_TUNNEL_KEY_ATTR_MAX (__OVS_TUNNEL_KEY_ATTR_MAX - 1) + /** * enum ovs_frag_type - IPv4 and IPv6 fragment type * @OVS_FRAG_TYPE_NONE: Packet is not a fragment. @@ -304,6 +334,11 @@ struct ovs_key_udp { __be16 udp_dst; }; +struct ovs_key_sctp { + __be16 sctp_src; + __be16 sctp_dst; +}; + struct ovs_key_icmp { __u8 icmp_type; __u8 icmp_code; @@ -350,6 +385,12 @@ struct ovs_key_nd { * @OVS_FLOW_ATTR_CLEAR: If present in a %OVS_FLOW_CMD_SET request, clears the * last-used time, accumulated TCP flags, and statistics for this flow. * Otherwise ignored in requests. Never present in notifications. + * @OVS_FLOW_ATTR_MASK: Nested %OVS_KEY_ATTR_* attributes specifying the + * mask bits for wildcarded flow match. Mask bit value '1' specifies exact + * match with corresponding flow key bit, while mask bit value '0' specifies + * a wildcarded match. Omitting attribute is treated as wildcarding all + * corresponding fields. Optional for all requests. If not present, + * all flow key bits are exact match bits. * * These attributes follow the &struct ovs_header within the Generic Netlink * payload for %OVS_FLOW_* commands. @@ -362,6 +403,7 @@ enum ovs_flow_attr { OVS_FLOW_ATTR_TCP_FLAGS, /* 8-bit OR'd TCP flags. */ OVS_FLOW_ATTR_USED, /* u64 msecs last used in monotonic time. */ OVS_FLOW_ATTR_CLEAR, /* Flag to clear stats, tcp_flags, used. */ + OVS_FLOW_ATTR_MASK, /* Sequence of OVS_KEY_ATTR_* attributes. */ __OVS_FLOW_ATTR_MAX }; diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 864e324..baa7852 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -421,24 +421,24 @@ #define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ #define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ -#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ #define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ #define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ #define PCI_EXP_DEVCAP 4 /* Device capabilities */ -#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ -#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ -#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ -#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ -#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ -#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ -#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ -#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ -#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ -#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ -#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */ +#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */ +#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */ +#define PCI_EXP_DEVCAP_L0S 0x000001c0 /* L0s Acceptable Latency */ +#define PCI_EXP_DEVCAP_L1 0x00000e00 /* L1 Acceptable Latency */ +#define PCI_EXP_DEVCAP_ATN_BUT 0x00001000 /* Attention Button Present */ +#define PCI_EXP_DEVCAP_ATN_IND 0x00002000 /* Attention Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_IND 0x00004000 /* Power Indicator Present */ +#define PCI_EXP_DEVCAP_RBER 0x00008000 /* Role-Based Error Reporting */ +#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */ +#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */ #define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ #define PCI_EXP_DEVCTL 8 /* Device Control */ #define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ @@ -454,42 +454,42 @@ #define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ #define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ #define PCI_EXP_DEVSTA 10 /* Device Status */ -#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ -#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ -#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ -#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ -#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ -#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ +#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */ +#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */ +#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */ +#define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */ +#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */ +#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ -#define PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */ -#define PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */ +#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ +#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ #define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ #define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ -#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */ +#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* Clock Power Management */ #define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */ #define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ #define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ #define PCI_EXP_LNKCTL 16 /* Link Control */ #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ -#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ -#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ +#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */ +#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */ #define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ #define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ #define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ #define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */ #define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ -#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ +#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */ #define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ #define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ #define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */ #define PCI_EXP_LNKSTA 18 /* Link Status */ #define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ -#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ -#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */ +#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */ #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */ #define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */ #define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ @@ -534,44 +534,49 @@ #define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ #define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ #define PCI_EXP_RTCTL 28 /* Root Control */ -#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ -#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ -#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ -#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ -#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */ +#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */ +#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */ +#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */ +#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ #define PCI_EXP_RTSTA 32 /* Root Status */ -#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ +#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ /* - * Note that the following PCI Express 'Capability Structure' registers - * were introduced with 'Capability Version' 0x2 (v2). These registers - * do not exist on devices with Capability Version 1. Use pci_pcie_cap2() - * to use these fields safely. + * The Device Capabilities 2, Device Status 2, Device Control 2, + * Link Capabilities 2, Link Status 2, Link Control 2, + * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers + * are only present on devices with PCIe Capability version 2. + * Use pcie_capability_read_word() and similar interfaces to use them + * safely. */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ -#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ -#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */ -#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */ -#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */ +#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */ +#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ +#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ +#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ -#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */ -#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */ -#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */ -#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ -#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ -#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */ +#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */ +#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */ +#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */ +#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */ +#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ -#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ -#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x02 /* Supported Link Speed 2.5GT/s */ -#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x04 /* Supported Link Speed 5.0GT/s */ -#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x08 /* Supported Link Speed 8.0GT/s */ -#define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ +#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ +#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ +#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */ /* Extended Capabilities (PCI-X 2.0 and Express) */ #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index fb104e5..ca1d90b 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -109,6 +109,7 @@ enum perf_sw_ids { PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, PERF_COUNT_SW_EMULATION_FAULTS = 8, + PERF_COUNT_SW_DUMMY = 9, PERF_COUNT_SW_MAX, /* non-ABI */ }; @@ -134,8 +135,9 @@ enum perf_event_sample_format { PERF_SAMPLE_STACK_USER = 1U << 13, PERF_SAMPLE_WEIGHT = 1U << 14, PERF_SAMPLE_DATA_SRC = 1U << 15, + PERF_SAMPLE_IDENTIFIER = 1U << 16, - PERF_SAMPLE_MAX = 1U << 16, /* non-ABI */ + PERF_SAMPLE_MAX = 1U << 17, /* non-ABI */ }; /* @@ -157,8 +159,11 @@ enum perf_branch_sample_type { PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */ PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */ PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */ + PERF_SAMPLE_BRANCH_ABORT_TX = 1U << 7, /* transaction aborts */ + PERF_SAMPLE_BRANCH_IN_TX = 1U << 8, /* in transaction */ + PERF_SAMPLE_BRANCH_NO_TX = 1U << 9, /* not in transaction */ - PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */ + PERF_SAMPLE_BRANCH_MAX = 1U << 10, /* non-ABI */ }; #define PERF_SAMPLE_BRANCH_PLM_ALL \ @@ -272,8 +277,9 @@ struct perf_event_attr { exclude_callchain_kernel : 1, /* exclude kernel callchains */ exclude_callchain_user : 1, /* exclude user callchains */ + mmap2 : 1, /* include mmap with inode data */ - __reserved_1 : 41; + __reserved_1 : 40; union { __u32 wakeup_events; /* wakeup every n events */ @@ -318,6 +324,7 @@ struct perf_event_attr { #define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) #define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) #define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) +#define PERF_EVENT_IOC_ID _IOR('$', 7, u64 *) enum perf_event_ioc_flags { PERF_IOC_FLAG_GROUP = 1U << 0, @@ -372,9 +379,12 @@ struct perf_event_mmap_page { __u64 time_running; /* time event on cpu */ union { __u64 capabilities; - __u64 cap_usr_time : 1, - cap_usr_rdpmc : 1, - cap_____res : 62; + struct { + __u64 cap_usr_time : 1, + cap_usr_rdpmc : 1, + cap_usr_time_zero : 1, + cap_____res : 61; + }; }; /* @@ -415,12 +425,29 @@ struct perf_event_mmap_page { __u16 time_shift; __u32 time_mult; __u64 time_offset; + /* + * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated + * from sample timestamps. + * + * time = timestamp - time_zero; + * quot = time / time_mult; + * rem = time % time_mult; + * cyc = (quot << time_shift) + (rem << time_shift) / time_mult; + * + * And vice versa: + * + * quot = cyc >> time_shift; + * rem = cyc & ((1 << time_shift) - 1); + * timestamp = time_zero + quot * time_mult + + * ((rem * time_mult) >> time_shift); + */ + __u64 time_zero; /* * Hole for extension of the self monitor capabilities */ - __u64 __reserved[120]; /* align to 1k */ + __u64 __reserved[119]; /* align to 1k */ /* * Control data for the mmap() data buffer. @@ -468,13 +495,28 @@ enum perf_event_type { /* * If perf_event_attr.sample_id_all is set then all event types will * have the sample_type selected fields related to where/when - * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID) - * described in PERF_RECORD_SAMPLE below, it will be stashed just after - * the perf_event_header and the fields already present for the existing - * fields, i.e. at the end of the payload. That way a newer perf.data - * file will be supported by older perf tools, with these new optional - * fields being ignored. + * (identity) an event took place (TID, TIME, ID, STREAM_ID, CPU, + * IDENTIFIER) described in PERF_RECORD_SAMPLE below, it will be stashed + * just after the perf_event_header and the fields already present for + * the existing fields, i.e. at the end of the payload. That way a newer + * perf.data file will be supported by older perf tools, with these new + * optional fields being ignored. + * + * struct sample_id { + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 id; } && PERF_SAMPLE_IDENTIFIER + * } && perf_event_attr::sample_id_all * + * Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. The + * advantage of PERF_SAMPLE_IDENTIFIER is that its position is fixed + * relative to header.size. + */ + + /* * The MMAP events record the PROT_EXEC mappings so that we can * correlate userspace IPs to code. They have the following structure: * @@ -495,6 +537,7 @@ enum perf_event_type { * struct perf_event_header header; * u64 id; * u64 lost; + * struct sample_id sample_id; * }; */ PERF_RECORD_LOST = 2, @@ -505,6 +548,7 @@ enum perf_event_type { * * u32 pid, tid; * char comm[]; + * struct sample_id sample_id; * }; */ PERF_RECORD_COMM = 3, @@ -515,6 +559,7 @@ enum perf_event_type { * u32 pid, ppid; * u32 tid, ptid; * u64 time; + * struct sample_id sample_id; * }; */ PERF_RECORD_EXIT = 4, @@ -525,6 +570,7 @@ enum perf_event_type { * u64 time; * u64 id; * u64 stream_id; + * struct sample_id sample_id; * }; */ PERF_RECORD_THROTTLE = 5, @@ -536,6 +582,7 @@ enum perf_event_type { * u32 pid, ppid; * u32 tid, ptid; * u64 time; + * struct sample_id sample_id; * }; */ PERF_RECORD_FORK = 7, @@ -546,6 +593,7 @@ enum perf_event_type { * u32 pid, tid; * * struct read_format values; + * struct sample_id sample_id; * }; */ PERF_RECORD_READ = 8, @@ -554,6 +602,13 @@ enum perf_event_type { * struct { * struct perf_event_header header; * + * # + * # Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. + * # The advantage of PERF_SAMPLE_IDENTIFIER is that its position + * # is fixed relative to header. + * # + * + * { u64 id; } && PERF_SAMPLE_IDENTIFIER * { u64 ip; } && PERF_SAMPLE_IP * { u32 pid, tid; } && PERF_SAMPLE_TID * { u64 time; } && PERF_SAMPLE_TIME @@ -593,11 +648,32 @@ enum perf_event_type { * u64 dyn_size; } && PERF_SAMPLE_STACK_USER * * { u64 weight; } && PERF_SAMPLE_WEIGHT - * { u64 data_src; } && PERF_SAMPLE_DATA_SRC + * { u64 data_src; } && PERF_SAMPLE_DATA_SRC * }; */ PERF_RECORD_SAMPLE = 9, + /* + * The MMAP2 records are an augmented version of MMAP, they add + * maj, min, ino numbers to be used to uniquely identify each mapping + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * u32 maj; + * u32 min; + * u64 ino; + * u64 ino_generation; + * char filename[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_MMAP2 = 10, + PERF_RECORD_MAX, /* non-ABI */ }; @@ -682,4 +758,28 @@ union perf_mem_data_src { #define PERF_MEM_S(a, s) \ (((u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) +/* + * single taken branch record layout: + * + * from: source instruction (may not always be a branch insn) + * to: branch target + * mispred: branch target was mispredicted + * predicted: branch target was predicted + * + * support for mispred, predicted is optional. In case it + * is not supported mispred = predicted = 0. + * + * in_tx: running in a hardware transaction + * abort: aborting a hardware transaction + */ +struct perf_branch_entry { + __u64 from; + __u64 to; + __u64 mispred:1, /* target mispredicted */ + predicted:1,/* target predicted */ + in_tx:1, /* in transaction */ + abort:1, /* transaction abort */ + reserved:60; +}; + #endif /* _UAPI_LINUX_PERF_EVENT_H */ diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index dbd71b0..9b82913 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -73,9 +73,17 @@ struct tc_estimator { #define TC_H_ROOT (0xFFFFFFFFU) #define TC_H_INGRESS (0xFFFFFFF1U) +/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */ +enum tc_link_layer { + TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */ + TC_LINKLAYER_ETHERNET, + TC_LINKLAYER_ATM, +}; +#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */ + struct tc_ratespec { unsigned char cell_log; - unsigned char __reserved; + __u8 linklayer; /* lower 4 bits */ unsigned short overhead; short cell_align; unsigned short mpu; @@ -736,4 +744,45 @@ struct tc_fq_codel_xstats { }; }; +/* FQ */ + +enum { + TCA_FQ_UNSPEC, + + TCA_FQ_PLIMIT, /* limit of total number of packets in queue */ + + TCA_FQ_FLOW_PLIMIT, /* limit of packets per flow */ + + TCA_FQ_QUANTUM, /* RR quantum */ + + TCA_FQ_INITIAL_QUANTUM, /* RR quantum for new flow */ + + TCA_FQ_RATE_ENABLE, /* enable/disable rate limiting */ + + TCA_FQ_FLOW_DEFAULT_RATE,/* for sockets with unspecified sk_rate, + * use the following rate + */ + + TCA_FQ_FLOW_MAX_RATE, /* per flow max rate */ + + TCA_FQ_BUCKETS_LOG, /* log2(number of buckets) */ + __TCA_FQ_MAX +}; + +#define TCA_FQ_MAX (__TCA_FQ_MAX - 1) + +struct tc_fq_qd_stats { + __u64 gc_flows; + __u64 highprio_packets; + __u64 tcp_retrans; + __u64 throttled; + __u64 flows_plimit; + __u64 pkts_too_long; + __u64 allocation_errors; + __s64 time_next_delayed_flow; + __u32 flows; + __u32 inactive_flows; + __u32 throttled_flows; + __u32 pad; +}; #endif diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h index 52ebcc8..cf1019e 100644 --- a/include/uapi/linux/ptrace.h +++ b/include/uapi/linux/ptrace.h @@ -61,6 +61,9 @@ struct ptrace_peeksiginfo_args { __s32 nr; /* how may siginfos to take */ }; +#define PTRACE_GETSIGMASK 0x420a +#define PTRACE_SETSIGMASK 0x420b + /* Read signals from a shared (process wide) queue */ #define PTRACE_PEEKSIGINFO_SHARED (1 << 0) diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 7a2144e..eb0f1a5 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -386,6 +386,8 @@ enum { #define RTAX_RTO_MIN RTAX_RTO_MIN RTAX_INITRWND, #define RTAX_INITRWND RTAX_INITRWND + RTAX_QUICKACK, +#define RTAX_QUICKACK RTAX_QUICKACK __RTAX_MAX }; diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 66b466e..ca451e9 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -28,7 +28,7 @@ * * Please send any bug reports or fixes you make to the * email address(es): - * lksctp developers <lksctp-developers@lists.sourceforge.net> + * lksctp developers <linux-sctp@vger.kernel.org> * * Or submit a bug report through the following website: * http://www.sf.net/projects/lksctp diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 74c2bf7..b47dba2 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -226,4 +226,16 @@ /* Rocketport EXPRESS/INFINITY */ #define PORT_RP2 102 +/* Freescale lpuart */ +#define PORT_LPUART 103 + +/* SH-SCI */ +#define PORT_HSCIF 104 + +/* ST ASC type numbers */ +#define PORT_ASC 105 + +/* Tilera TILE-Gx UART */ +#define PORT_TILEGX 106 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index df2e8b4..1bdb4a3 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -51,6 +51,10 @@ enum IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */ IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */ IPSTATS_MIB_CSUMERRORS, /* InCsumErrors */ + IPSTATS_MIB_NOECTPKTS, /* InNoECTPkts */ + IPSTATS_MIB_ECT1PKTS, /* InECT1Pkts */ + IPSTATS_MIB_ECT0PKTS, /* InECT0Pkts */ + IPSTATS_MIB_CEPKTS, /* InCEPkts */ __IPSTATS_MIB_MAX }; @@ -253,6 +257,7 @@ enum LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */ LINUX_MIB_TCPFASTOPENCOOKIEREQD, /* TCPFastOpenCookieReqd */ LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES, /* TCPSpuriousRtxHostQueues */ + LINUX_MIB_BUSYPOLLRXPACKETS, /* BusyPollRxPackets */ __LINUX_MIB_MAX }; @@ -287,6 +292,7 @@ enum LINUX_MIB_XFRMOUTPOLERROR, /* XfrmOutPolError */ LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ LINUX_MIB_XFRMOUTSTATEINVALID, /* XfrmOutStateInvalid */ + LINUX_MIB_XFRMACQUIREERROR, /* XfrmAcquireError */ __LINUX_MIB_XFRMMAX }; diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 8d776eb..377f1e5 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -111,6 +111,7 @@ enum { #define TCP_REPAIR_OPTIONS 22 #define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ #define TCP_TIMESTAMP 24 +#define TCP_NOTSENT_LOWAT 25 /* limit number of unsent bytes in write queue */ struct tcp_repair_opt { __u32 opt_code; diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h index f2d9009..852373d 100644 --- a/include/uapi/linux/tipc.h +++ b/include/uapi/linux/tipc.h @@ -1,5 +1,5 @@ /* - * include/linux/tipc.h: Include file for TIPC socket interface + * include/uapi/linux/tipc.h: Header for TIPC socket interface * * Copyright (c) 2003-2006, Ericsson AB * Copyright (c) 2005, 2010-2011, Wind River Systems diff --git a/include/uapi/linux/tipc_config.h b/include/uapi/linux/tipc_config.h index 0b1e3f2..6b0bff0 100644 --- a/include/uapi/linux/tipc_config.h +++ b/include/uapi/linux/tipc_config.h @@ -1,5 +1,5 @@ /* - * include/linux/tipc_config.h: Include file for TIPC configuration interface + * include/uapi/linux/tipc_config.h: Header for TIPC configuration interface * * Copyright (c) 2003-2006, Ericsson AB * Copyright (c) 2005-2007, 2010-2011, Wind River Systems diff --git a/include/uapi/linux/uhid.h b/include/uapi/linux/uhid.h index e9ed951..414b74b 100644 --- a/include/uapi/linux/uhid.h +++ b/include/uapi/linux/uhid.h @@ -30,7 +30,7 @@ enum uhid_event_type { UHID_OPEN, UHID_CLOSE, UHID_OUTPUT, - UHID_OUTPUT_EV, + UHID_OUTPUT_EV, /* obsolete! */ UHID_INPUT, UHID_FEATURE, UHID_FEATURE_ANSWER, @@ -69,6 +69,8 @@ struct uhid_output_req { __u8 rtype; } __attribute__((__packed__)); +/* Obsolete! Newer kernels will no longer send these events but instead convert + * it into raw output reports via UHID_OUTPUT. */ struct uhid_output_ev_req { __u16 type; __u16 code; diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h index 7692dc6..331499d 100644 --- a/include/uapi/linux/usb/ch11.h +++ b/include/uapi/linux/usb/ch11.h @@ -11,6 +11,17 @@ #include <linux/types.h> /* __u8 etc */ +/* This is arbitrary. + * From USB 2.0 spec Table 11-13, offset 7, a hub can + * have up to 255 ports. The most yet reported is 10. + * + * Current Wireless USB host hardware (Intel i1480 for example) allows + * up to 22 devices to connect. Upcoming hardware might raise that + * limit. Because the arrays need to add a bit for hub status data, we + * use 31, so plus one evens out to four bytes. + */ +#define USB_MAXCHILDREN 31 + /* * Hub request types */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 69bd5bb..083bb5a 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -53,13 +53,13 @@ #define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ #define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ #define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ -#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ +#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator controls */ #define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */ #define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */ #define V4L2_CTRL_CLASS_IMAGE_SOURCE 0x009e0000 /* Image source controls */ #define V4L2_CTRL_CLASS_IMAGE_PROC 0x009f0000 /* Image processing controls */ #define V4L2_CTRL_CLASS_DV 0x00a00000 /* Digital Video controls */ -#define V4L2_CTRL_CLASS_FM_RX 0x00a10000 /* Digital Video controls */ +#define V4L2_CTRL_CLASS_FM_RX 0x00a10000 /* FM Receiver controls */ /* User-class control IDs */ @@ -161,6 +161,8 @@ enum v4l2_colorfx { #define V4L2_CID_USER_SI476X_BASE (V4L2_CID_USER_BASE + 0x1040) /* MPEG-class control IDs */ +/* The MPEG controls are applicable to all codec controls + * and the 'MPEG' part of the define is historical */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) #define V4L2_CID_MPEG_CLASS (V4L2_CTRL_CLASS_MPEG | 1) @@ -522,6 +524,33 @@ enum v4l2_mpeg_video_mpeg4_profile { }; #define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (V4L2_CID_MPEG_BASE+407) +/* Control IDs for VP8 streams + * Although VP8 is not part of MPEG we add these controls to the MPEG class + * as that class is already handling other video compression standards + */ +#define V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS (V4L2_CID_MPEG_BASE+500) +enum v4l2_vp8_num_partitions { + V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION = 0, + V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS = 1, + V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS = 2, + V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS = 3, +}; +#define V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (V4L2_CID_MPEG_BASE+501) +#define V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES (V4L2_CID_MPEG_BASE+502) +enum v4l2_vp8_num_ref_frames { + V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME = 0, + V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME = 1, + V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME = 2, +}; +#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (V4L2_CID_MPEG_BASE+503) +#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (V4L2_CID_MPEG_BASE+504) +#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (V4L2_CID_MPEG_BASE+505) +#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL (V4L2_CID_MPEG_BASE+506) +enum v4l2_vp8_golden_frame_sel { + V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV = 0, + V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD = 1, +}; + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0) diff --git a/include/uapi/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h index 4e0c58d..be709fe 100644 --- a/include/uapi/linux/v4l2-dv-timings.h +++ b/include/uapi/linux/v4l2-dv-timings.h @@ -823,12 +823,4 @@ V4L2_DV_FL_REDUCED_BLANKING) \ } -#define V4L2_DV_BT_DMT_1366X768P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1366, 768, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - #endif diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 6ee63d0..a960125 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -37,7 +37,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_FIXED = 0x0001, - /* RGB - next is 0x100d */ + /* RGB - next is 0x100e */ V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001, V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002, V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003, @@ -50,8 +50,9 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_RGB888_1X24 = 0x100a, V4L2_MBUS_FMT_RGB888_2X12_BE = 0x100b, V4L2_MBUS_FMT_RGB888_2X12_LE = 0x100c, + V4L2_MBUS_FMT_ARGB8888_1X32 = 0x100d, - /* YUV (including grey) - next is 0x2017 */ + /* YUV (including grey) - next is 0x2018 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, V4L2_MBUS_FMT_UV8_1X8 = 0x2015, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, @@ -74,6 +75,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, V4L2_MBUS_FMT_YUV10_1X30 = 0x2016, + V4L2_MBUS_FMT_AYUV8_1X32 = 0x2017, /* Bayer - next is 0x3019 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 284ff24..916e444 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -22,6 +22,7 @@ /* Extensions */ #define VFIO_TYPE1_IOMMU 1 +#define VFIO_SPAPR_TCE_IOMMU 2 /* * The IOCTL interface is designed for extensibility by embedding the @@ -361,10 +362,14 @@ struct vfio_iommu_type1_dma_map { #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) /** - * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) + * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14, + * struct vfio_dma_unmap) * * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. - * Caller sets argsz. + * Caller sets argsz. The actual unmapped size is returned in the size + * field. No guarantee is made to the user that arbitrary unmaps of iova + * or size different from those used in the original mapping call will + * succeed. */ struct vfio_iommu_type1_dma_unmap { __u32 argsz; @@ -375,4 +380,37 @@ struct vfio_iommu_type1_dma_unmap { #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) +/* + * IOCTLs to enable/disable IOMMU container usage. + * No parameters are supported. + */ +#define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15) +#define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16) + +/* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */ + +/* + * The SPAPR TCE info struct provides the information about the PCI bus + * address ranges available for DMA, these values are programmed into + * the hardware so the guest has to know that information. + * + * The DMA 32 bit window start is an absolute PCI bus address. + * The IOVA address passed via map/unmap ioctls are absolute PCI bus + * addresses too so the window works as a filter rather than an offset + * for IOVA addresses. + * + * A flag will need to be added if other page sizes are supported, + * so as defined here, it is always 4k. + */ +struct vfio_iommu_spapr_tce_info { + __u32 argsz; + __u32 flags; /* reserved for future use */ + __u32 dma32_window_start; /* 32 bit window start (bytes) */ + __u32 dma32_window_size; /* 32 bit window size (bytes) */ +}; + +#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/* ***************************************************************** */ + #endif /* _UAPIVFIO_H */ diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index f40b41c..437f1b0 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -348,6 +348,8 @@ struct v4l2_pix_format { /* two non contiguous planes - one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ #define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */ +#define V4L2_PIX_FMT_NV16M v4l2_fourcc('N', 'M', '1', '6') /* 16 Y/CbCr 4:2:2 */ +#define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */ #define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */ #define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */ @@ -395,7 +397,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */ #define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */ #define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */ -#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */ +#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 part 2 ES */ #define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */ #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ @@ -555,7 +557,7 @@ struct v4l2_jpegcompression { __u32 jpeg_markers; /* Which markers should go into the JPEG * output. Unless you exactly know what * you do, leave them untouched. - * Inluding less markers will make the + * Including less markers will make the * resulting code smaller, but there will * be fewer applications which can read it. * The presence of the APP and COM marker @@ -567,7 +569,7 @@ struct v4l2_jpegcompression { #define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ #define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */ #define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will - * allways use APP0 */ + * always use APP0 */ }; /* @@ -900,7 +902,7 @@ typedef __u64 v4l2_std_id; /* * "Common" PAL - This macro is there to be compatible with the old * V4L1 concept of "PAL": /BGDKHI. - * Several PAL standards are mising here: /M, /N and /Nc + * Several PAL standards are missing here: /M, /N and /Nc */ #define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ V4L2_STD_PAL_DK |\ @@ -1055,6 +1057,16 @@ struct v4l2_bt_timings { or used depends on the hardware. */ #define V4L2_DV_FL_HALF_LINE (1 << 3) +/* A few useful defines to calculate the total blanking and frame sizes */ +#define V4L2_DV_BT_BLANKING_WIDTH(bt) \ + (bt->hfrontporch + bt->hsync + bt->hbackporch) +#define V4L2_DV_BT_FRAME_WIDTH(bt) \ + (bt->width + V4L2_DV_BT_BLANKING_WIDTH(bt)) +#define V4L2_DV_BT_BLANKING_HEIGHT(bt) \ + (bt->vfrontporch + bt->vsync + bt->vbackporch + \ + bt->il_vfrontporch + bt->il_vsync + bt->il_vbackporch) +#define V4L2_DV_BT_FRAME_HEIGHT(bt) \ + (bt->height + V4L2_DV_BT_BLANKING_HEIGHT(bt)) /** struct v4l2_dv_timings - DV timings * @type: the type of the timings @@ -1787,11 +1799,13 @@ struct v4l2_event_subscription { /* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */ #define V4L2_CHIP_MATCH_BRIDGE 0 /* Match against chip ID on the bridge (0 for the bridge) */ +#define V4L2_CHIP_MATCH_SUBDEV 4 /* Match against subdev index */ + +/* The following four defines are no longer in use */ #define V4L2_CHIP_MATCH_HOST V4L2_CHIP_MATCH_BRIDGE #define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */ #define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */ -#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */ -#define V4L2_CHIP_MATCH_SUBDEV 4 /* Match against subdev index */ +#define V4L2_CHIP_MATCH_AC97 3 /* Match against ancillary AC97 chip */ struct v4l2_dbg_match { __u32 type; /* Match type */ @@ -1808,13 +1822,6 @@ struct v4l2_dbg_register { __u64 val; } __attribute__ ((packed)); -/* VIDIOC_DBG_G_CHIP_IDENT */ -struct v4l2_dbg_chip_ident { - struct v4l2_dbg_match match; - __u32 ident; /* chip identifier as specified in <media/v4l2-chip-ident.h> */ - __u32 revision; /* chip revision, chip specific */ -} __attribute__ ((packed)); - #define V4L2_CHIP_FL_READABLE (1 << 0) #define V4L2_CHIP_FL_WRITABLE (1 << 1) @@ -1915,12 +1922,6 @@ struct v4l2_create_buffers { #define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register) #define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register) -/* Experimental, meant for debugging, testing and internal use. - Never use this ioctl in applications! - Note: this ioctl is deprecated in favor of VIDIOC_DBG_G_CHIP_INFO and - will go away in the future. */ -#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident) - #define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek) #define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings) diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h index b7cda39..3ce768c 100644 --- a/include/uapi/linux/virtio_config.h +++ b/include/uapi/linux/virtio_config.h @@ -51,4 +51,7 @@ * suppressed them? */ #define VIRTIO_F_NOTIFY_ON_EMPTY 24 +/* Can the device handle any descriptor layout? */ +#define VIRTIO_F_ANY_LAYOUT 27 + #endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */ diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h index c312f16..ba260dd 100644 --- a/include/uapi/linux/virtio_console.h +++ b/include/uapi/linux/virtio_console.h @@ -38,6 +38,7 @@ /* Feature bits */ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ #define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ +#define VIRTIO_CONSOLE_F_EMERG_WRITE 2 /* Does host support emergency write? */ #define VIRTIO_CONSOLE_BAD_ID (~(__u32)0) @@ -48,6 +49,8 @@ struct virtio_console_config { __u16 rows; /* max. number of ports this device can hold */ __u32 max_nr_ports; + /* emergency write register */ + __u32 emerg_wr; } __attribute__((packed)); /* diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index c520203..172a7f0 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -60,7 +60,7 @@ struct virtio_net_config { /* The config defining mac address (if VIRTIO_NET_F_MAC) */ - __u8 mac[6]; + __u8 mac[ETH_ALEN]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ __u16 status; /* Maximum number of each of transmit and receive queues; @@ -70,7 +70,9 @@ struct virtio_net_config { __u16 max_virtqueue_pairs; } __attribute__((packed)); -/* This is the first element of the scatter-gather list. If you don't +/* This header comes first in the scatter-gather list. + * If VIRTIO_F_ANY_LAYOUT is not negotiated, it must + * be the first element of the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. */ struct virtio_net_hdr { #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset diff --git a/include/uapi/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h index ea66f3f..e5ec1ca 100644 --- a/include/uapi/linux/virtio_pci.h +++ b/include/uapi/linux/virtio_pci.h @@ -80,7 +80,9 @@ /* The remaining space is defined by each driver as the per-driver * configuration space */ -#define VIRTIO_PCI_CONFIG(dev) ((dev)->msix_enabled ? 24 : 20) +#define VIRTIO_PCI_CONFIG_OFF(msix_enabled) ((msix_enabled) ? 24 : 20) +/* Deprecated: please use VIRTIO_PCI_CONFIG_OFF instead */ +#define VIRTIO_PCI_CONFIG(dev) VIRTIO_PCI_CONFIG_OFF((dev)->msix_enabled) /* Virtio ABI version, this must match exactly */ #define VIRTIO_PCI_ABI_VERSION 0 diff --git a/include/uapi/linux/wimax/i2400m.h b/include/uapi/linux/wimax/i2400m.h index 62d3561..fd198bc 100644 --- a/include/uapi/linux/wimax/i2400m.h +++ b/include/uapi/linux/wimax/i2400m.h @@ -122,7 +122,7 @@ #define __LINUX__WIMAX__I2400M_H__ #include <linux/types.h> - +#include <linux/if_ether.h> /* * Host Device Interface (HDI) common to all busses @@ -487,7 +487,7 @@ struct i2400m_tlv_l4_message_versions { struct i2400m_tlv_detailed_device_info { struct i2400m_tlv_hdr hdr; __u8 reserved1[400]; - __u8 mac_address[6]; + __u8 mac_address[ETH_ALEN]; __u8 reserved2[2]; } __attribute__((packed)); |