diff options
Diffstat (limited to 'mm')
| -rw-r--r-- | mm/filemap.c | 6 | ||||
| -rw-r--r-- | mm/huge_memory.c | 16 | ||||
| -rw-r--r-- | mm/hugetlb.c | 1 | ||||
| -rw-r--r-- | mm/migrate.c | 2 | ||||
| -rw-r--r-- | mm/page-writeback.c | 32 | ||||
| -rw-r--r-- | mm/page_alloc.c | 10 | ||||
| -rw-r--r-- | mm/vmalloc.c | 2 | ||||
| -rw-r--r-- | mm/vmscan.c | 26 |
8 files changed, 61 insertions, 34 deletions
diff --git a/mm/filemap.c b/mm/filemap.c index c0018f2..c106d3b 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2407,7 +2407,6 @@ static ssize_t generic_perform_write(struct file *file, iov_iter_count(i)); again: - /* * Bring in the user page that we will copy from _first_. * Otherwise there's a nasty deadlock on copying from the @@ -2463,7 +2462,10 @@ again: written += copied; balance_dirty_pages_ratelimited(mapping); - + if (fatal_signal_pending(current)) { + status = -EINTR; + break; + } } while (iov_iter_count(i)); return written ? written : status; diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 4298aba..36b3d98 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2259,12 +2259,8 @@ static void khugepaged_do_scan(struct page **hpage) static void khugepaged_alloc_sleep(void) { - DEFINE_WAIT(wait); - add_wait_queue(&khugepaged_wait, &wait); - schedule_timeout_interruptible( - msecs_to_jiffies( - khugepaged_alloc_sleep_millisecs)); - remove_wait_queue(&khugepaged_wait, &wait); + wait_event_freezable_timeout(khugepaged_wait, false, + msecs_to_jiffies(khugepaged_alloc_sleep_millisecs)); } #ifndef CONFIG_NUMA @@ -2313,14 +2309,10 @@ static void khugepaged_loop(void) if (unlikely(kthread_should_stop())) break; if (khugepaged_has_work()) { - DEFINE_WAIT(wait); if (!khugepaged_scan_sleep_millisecs) continue; - add_wait_queue(&khugepaged_wait, &wait); - schedule_timeout_interruptible( - msecs_to_jiffies( - khugepaged_scan_sleep_millisecs)); - remove_wait_queue(&khugepaged_wait, &wait); + wait_event_freezable_timeout(khugepaged_wait, false, + msecs_to_jiffies(khugepaged_scan_sleep_millisecs)); } else if (khugepaged_enabled()) wait_event_freezable(khugepaged_wait, khugepaged_wait_event()); diff --git a/mm/hugetlb.c b/mm/hugetlb.c index bb28a5f..73f17c0 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -576,6 +576,7 @@ static void prep_compound_gigantic_page(struct page *page, unsigned long order) __SetPageHead(page); for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) { __SetPageTail(p); + set_page_count(p, 0); p->first_page = page; } } diff --git a/mm/migrate.c b/mm/migrate.c index 578e291..177aca4 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -871,9 +871,9 @@ static int unmap_and_move_huge_page(new_page_t get_new_page, if (anon_vma) put_anon_vma(anon_vma); -out: unlock_page(hpage); +out: if (rc != -EAGAIN) { list_del(&hpage->lru); put_page(hpage); diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 7125248..50f0824 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -411,8 +411,13 @@ void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty) * * Returns @bdi's dirty limit in pages. The term "dirty" in the context of * dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages. - * And the "limit" in the name is not seriously taken as hard limit in - * balance_dirty_pages(). + * + * Note that balance_dirty_pages() will only seriously take it as a hard limit + * when sleeping max_pause per page is not enough to keep the dirty pages under + * control. For example, when the device is completely stalled due to some error + * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key. + * In the other normal situations, it acts more gently by throttling the tasks + * more (rather than completely block them) when the bdi dirty pages go high. * * It allocates high/low dirty limits to fast/slow devices, in order to prevent * - starving fast devices @@ -594,6 +599,13 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, */ if (unlikely(bdi_thresh > thresh)) bdi_thresh = thresh; + /* + * It's very possible that bdi_thresh is close to 0 not because the + * device is slow, but that it has remained inactive for long time. + * Honour such devices a reasonable good (hopefully IO efficient) + * threshold, so that the occasional writes won't be blocked and active + * writes can rampup the threshold quickly. + */ bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); /* * scale global setpoint to bdi's: @@ -977,8 +989,7 @@ static unsigned long bdi_max_pause(struct backing_dev_info *bdi, * * 8 serves as the safety ratio. */ - if (bdi_dirty) - t = min(t, bdi_dirty * HZ / (8 * bw + 1)); + t = min(t, bdi_dirty * HZ / (8 * bw + 1)); /* * The pause time will be settled within range (max_pause/4, max_pause). @@ -1136,6 +1147,19 @@ pause: if (task_ratelimit) break; + /* + * In the case of an unresponding NFS server and the NFS dirty + * pages exceeds dirty_thresh, give the other good bdi's a pipe + * to go through, so that tasks on them still remain responsive. + * + * In theory 1 page is enough to keep the comsumer-producer + * pipe going: the flusher cleans 1 page => the task dirties 1 + * more page. However bdi_dirty has accounting errors. So use + * the larger and more IO friendly bdi_stat_error. + */ + if (bdi_dirty <= bdi_stat_error(bdi)) + break; + if (fatal_signal_pending(current)) break; } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 9dd443d..2b8ba3a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -356,8 +356,8 @@ void prep_compound_page(struct page *page, unsigned long order) __SetPageHead(page); for (i = 1; i < nr_pages; i++) { struct page *p = page + i; - __SetPageTail(p); + set_page_count(p, 0); p->first_page = page; } } @@ -3377,9 +3377,15 @@ static void setup_zone_migrate_reserve(struct zone *zone) unsigned long block_migratetype; int reserve; - /* Get the start pfn, end pfn and the number of blocks to reserve */ + /* + * Get the start pfn, end pfn and the number of blocks to reserve + * We have to be careful to be aligned to pageblock_nr_pages to + * make sure that we always check pfn_valid for the first page in + * the block. + */ start_pfn = zone->zone_start_pfn; end_pfn = start_pfn + zone->spanned_pages; + start_pfn = roundup(start_pfn, pageblock_nr_pages); reserve = roundup(min_wmark_pages(zone), pageblock_nr_pages) >> pageblock_order; diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 3231bf3..1d8b32f 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1633,6 +1633,8 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align, goto fail; addr = __vmalloc_area_node(area, gfp_mask, prot, node, caller); + if (!addr) + return NULL; /* * In this function, newly allocated vm_struct is not added diff --git a/mm/vmscan.c b/mm/vmscan.c index a1893c0..f54a05b 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -183,7 +183,7 @@ static unsigned long zone_nr_lru_pages(struct zone *zone, */ void register_shrinker(struct shrinker *shrinker) { - shrinker->nr = 0; + atomic_long_set(&shrinker->nr_in_batch, 0); down_write(&shrinker_rwsem); list_add_tail(&shrinker->list, &shrinker_list); up_write(&shrinker_rwsem); @@ -247,25 +247,26 @@ unsigned long shrink_slab(struct shrink_control *shrink, list_for_each_entry(shrinker, &shrinker_list, list) { unsigned long long delta; - unsigned long total_scan; - unsigned long max_pass; + long total_scan; + long max_pass; int shrink_ret = 0; long nr; long new_nr; long batch_size = shrinker->batch ? shrinker->batch : SHRINK_BATCH; + max_pass = do_shrinker_shrink(shrinker, shrink, 0); + if (max_pass <= 0) + continue; + /* * copy the current shrinker scan count into a local variable * and zero it so that other concurrent shrinker invocations * don't also do this scanning work. */ - do { - nr = shrinker->nr; - } while (cmpxchg(&shrinker->nr, nr, 0) != nr); + nr = atomic_long_xchg(&shrinker->nr_in_batch, 0); total_scan = nr; - max_pass = do_shrinker_shrink(shrinker, shrink, 0); delta = (4 * nr_pages_scanned) / shrinker->seeks; delta *= max_pass; do_div(delta, lru_pages + 1); @@ -325,12 +326,11 @@ unsigned long shrink_slab(struct shrink_control *shrink, * manner that handles concurrent updates. If we exhausted the * scan, there is no need to do an update. */ - do { - nr = shrinker->nr; - new_nr = total_scan + nr; - if (total_scan <= 0) - break; - } while (cmpxchg(&shrinker->nr, nr, new_nr) != nr); + if (total_scan > 0) + new_nr = atomic_long_add_return(total_scan, + &shrinker->nr_in_batch); + else + new_nr = atomic_long_read(&shrinker->nr_in_batch); trace_mm_shrink_slab_end(shrinker, shrink_ret, nr, new_nr); } |