diff options
Diffstat (limited to 'net/mac80211')
-rw-r--r-- | net/mac80211/cfg.c | 2 | ||||
-rw-r--r-- | net/mac80211/mesh_ps.c | 4 | ||||
-rw-r--r-- | net/mac80211/mlme.c | 54 | ||||
-rw-r--r-- | net/mac80211/pm.c | 7 | ||||
-rw-r--r-- | net/mac80211/rc80211_minstrel.c | 3 | ||||
-rw-r--r-- | net/mac80211/rc80211_minstrel_ht.c | 10 | ||||
-rw-r--r-- | net/mac80211/rx.c | 10 |
7 files changed, 66 insertions, 24 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8184d12..43dd752 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -666,6 +666,8 @@ static void ieee80211_get_et_stats(struct wiphy *wiphy, if (sta->sdata->dev != dev) continue; + sinfo.filled = 0; + sta_set_sinfo(sta, &sinfo); i = 0; ADD_STA_STATS(sta); } diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c index 3b7bfc0..22290a9 100644 --- a/net/mac80211/mesh_ps.c +++ b/net/mac80211/mesh_ps.c @@ -229,6 +229,10 @@ void ieee80211_mps_sta_status_update(struct sta_info *sta) enum nl80211_mesh_power_mode pm; bool do_buffer; + /* For non-assoc STA, prevent buffering or frame transmission */ + if (sta->sta_state < IEEE80211_STA_ASSOC) + return; + /* * use peer-specific power mode if peering is established and the * peer's power mode is known diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ae31968..cc9e02d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -31,10 +31,12 @@ #include "led.h" #define IEEE80211_AUTH_TIMEOUT (HZ / 5) +#define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2) #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) #define IEEE80211_AUTH_MAX_TRIES 3 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) +#define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2) #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) #define IEEE80211_ASSOC_MAX_TRIES 3 @@ -209,8 +211,9 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel, const struct ieee80211_ht_operation *ht_oper, const struct ieee80211_vht_operation *vht_oper, - struct cfg80211_chan_def *chandef, bool verbose) + struct cfg80211_chan_def *chandef, bool tracking) { + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct cfg80211_chan_def vht_chandef; u32 ht_cfreq, ret; @@ -229,7 +232,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, channel->band); /* check that channel matches the right operating channel */ - if (channel->center_freq != ht_cfreq) { + if (!tracking && channel->center_freq != ht_cfreq) { /* * It's possible that some APs are confused here; * Netgear WNDR3700 sometimes reports 4 higher than @@ -237,11 +240,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, * since we look at probe response/beacon data here * it should be OK. */ - if (verbose) - sdata_info(sdata, - "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - channel->center_freq, ht_cfreq, - ht_oper->primary_chan, channel->band); + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; goto out; } @@ -295,7 +297,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, channel->band); break; default: - if (verbose) + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) sdata_info(sdata, "AP VHT operation IE has invalid channel width (%d), disable VHT\n", vht_oper->chan_width); @@ -304,7 +306,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, } if (!cfg80211_chandef_valid(&vht_chandef)) { - if (verbose) + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) sdata_info(sdata, "AP VHT information is invalid, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; @@ -317,7 +319,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, } if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - if (verbose) + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) sdata_info(sdata, "AP VHT information doesn't match HT, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; @@ -333,18 +335,27 @@ out: if (ret & IEEE80211_STA_DISABLE_VHT) vht_chandef = *chandef; + /* + * Ignore the DISABLED flag when we're already connected and only + * tracking the APs beacon for bandwidth changes - otherwise we + * might get disconnected here if we connect to an AP, update our + * regulatory information based on the AP's country IE and the + * information we have is wrong/outdated and disables the channel + * that we're actually using for the connection to the AP. + */ while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, - IEEE80211_CHAN_DISABLED)) { + tracking ? 0 : + IEEE80211_CHAN_DISABLED)) { if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; + break; } ret |= chandef_downgrade(chandef); } - if (chandef->width != vht_chandef.width && verbose) + if (chandef->width != vht_chandef.width && !tracking) sdata_info(sdata, "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); @@ -384,7 +395,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, /* calculate new channel (type) based on HT/VHT operation IEs */ flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper, - vht_oper, &chandef, false); + vht_oper, &chandef, true); /* * Downgrade the new channel if we associated with restricted @@ -3394,10 +3405,13 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) if (tx_flags == 0) { auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; - ifmgd->auth_data->timeout_started = true; + auth_data->timeout_started = true; run_again(sdata, auth_data->timeout); } else { - auth_data->timeout_started = false; + auth_data->timeout = + round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG); + auth_data->timeout_started = true; + run_again(sdata, auth_data->timeout); } return 0; @@ -3434,7 +3448,11 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) assoc_data->timeout_started = true; run_again(sdata, assoc_data->timeout); } else { - assoc_data->timeout_started = false; + assoc_data->timeout = + round_jiffies_up(jiffies + + IEEE80211_ASSOC_TIMEOUT_LONG); + assoc_data->timeout_started = true; + run_again(sdata, assoc_data->timeout); } return 0; @@ -3829,7 +3847,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, cbss->channel, ht_oper, vht_oper, - &chandef, true); + &chandef, false); sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss), local->rx_chains); diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 7fc5d0d..3401262 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -99,10 +99,13 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) } mutex_unlock(&local->sta_mtx); - /* remove all interfaces */ + /* remove all interfaces that were created in the driver */ list_for_each_entry(sdata, &local->interfaces, list) { - if (!ieee80211_sdata_running(sdata)) + if (!ieee80211_sdata_running(sdata) || + sdata->vif.type == NL80211_IFTYPE_AP_VLAN || + sdata->vif.type == NL80211_IFTYPE_MONITOR) continue; + drv_remove_interface(local, sdata); } diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index ac7ef54..e6512e2 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -290,7 +290,7 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta, struct minstrel_rate *msr, *mr; unsigned int ndx; bool mrr_capable; - bool prev_sample = mi->prev_sample; + bool prev_sample; int delta; int sampling_ratio; @@ -314,6 +314,7 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta, (mi->sample_count + mi->sample_deferred / 2); /* delta < 0: no sampling required */ + prev_sample = mi->prev_sample; mi->prev_sample = false; if (delta < 0 || (!mrr_capable && prev_sample)) return; diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 5b2d301..f5aed96 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -804,10 +804,18 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, sample_group = &minstrel_mcs_groups[sample_idx / MCS_GROUP_RATES]; info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; + rate->count = 1; + + if (sample_idx / MCS_GROUP_RATES == MINSTREL_CCK_GROUP) { + int idx = sample_idx % ARRAY_SIZE(mp->cck_rates); + rate->idx = mp->cck_rates[idx]; + rate->flags = 0; + return; + } + rate->idx = sample_idx % MCS_GROUP_RATES + (sample_group->streams - 1) * MCS_GROUP_RATES; rate->flags = IEEE80211_TX_RC_MCS | sample_group->flags; - rate->count = 1; } static void diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 23dbcfc..2c5a79b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -936,8 +936,14 @@ ieee80211_rx_h_check(struct ieee80211_rx_data *rx) struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb); - /* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */ - if (rx->sta && !is_multicast_ether_addr(hdr->addr1)) { + /* + * Drop duplicate 802.11 retransmissions + * (IEEE 802.11-2012: 9.3.2.10 "Duplicate detection and recovery") + */ + if (rx->skb->len >= 24 && rx->sta && + !ieee80211_is_ctl(hdr->frame_control) && + !ieee80211_is_qos_nullfunc(hdr->frame_control) && + !is_multicast_ether_addr(hdr->addr1)) { if (unlikely(ieee80211_has_retry(hdr->frame_control) && rx->sta->last_seq_ctrl[rx->seqno_idx] == hdr->seq_ctrl)) { |