summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-17ARM: Add TCC8xxx system timerHans J. Koch
Add the system timer using clockevents with the internal TC32 timer. This also adds a clocksource using the same timer. Signed-off-by: "Hans J. Koch" <hjk@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-17ARM: Introduce plat-tcc irq frameworkHans J. Koch
Introduce lowlevel interrupt routines. Signed-off-by: "Hans J. Koch" <hjk@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-17ARM: Add the clock framework for Telechips TCC8xxx processors.Hans J. Koch
This adds definitions and low-level functions to handle clocks in TCC8xxx processors. Signed-off-by: "Hans J. Koch" <hjk@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-17ARM: Introduce plat-tccHans J. Koch
This patch introduces support for the tcc platform by creating an arch/arm/plat-tcc and arch/arm/mach-tcc8k directories and adding basic include files plus Kconfig and Makefile. Signed-off-by: "Hans J. Koch" <hjk@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-17Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (lm95241) Replace rate sysfs attribute with update_interval hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval hwmon: (w83627ehf) Use proper exit sequence hwmon: (emc1403) Remove unnecessary hwmon_device_unregister hwmon: (f75375s) Do not overwrite values read from registers hwmon: (f75375s) Shift control mode to the correct bit position hwmon: New subsystem maintainers hwmon: (lis3lv02d) Prevent NULL pointer dereference
2010-09-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: gfs2_logd should be using interruptible waits
2010-09-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: nosy: fix build when CONFIG_FIREWIRE=N firewire: ohci: activate cycle timer register quirk on Ricoh chips
2010-09-17Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: fix v1.x metadata update when a disk is missing. md: call md_update_sb even for 'external' metadata arrays.
2010-09-17arm: fix really nasty sigreturn bugAl Viro
If a signal hits us outside of a syscall and another gets delivered when we are in sigreturn (e.g. because it had been in sa_mask for the first one and got sent to us while we'd been in the first handler), we have a chance of returning from the second handler to location one insn prior to where we ought to return. If r0 happens to contain -513 (-ERESTARTNOINTR), sigreturn will get confused into doing restart syscall song and dance. Incredible joy to debug, since it manifests as random, infrequent and very hard to reproduce double execution of instructions in userland code... The fix is simple - mark it "don't bother with restarts" in wrapper, i.e. set r8 to 0 in sys_sigreturn and sys_rt_sigreturn wrappers, suppressing the syscall restart handling on return from these guys. They can't legitimately return a restart-worthy error anyway. Testcase: #include <unistd.h> #include <signal.h> #include <stdlib.h> #include <sys/time.h> #include <errno.h> void f(int n) { __asm__ __volatile__( "ldr r0, [%0]\n" "b 1f\n" "b 2f\n" "1:b .\n" "2:\n" : : "r"(&n)); } void handler1(int sig) { } void handler2(int sig) { raise(1); } void handler3(int sig) { exit(0); } main() { struct sigaction s = {.sa_handler = handler2}; struct itimerval t1 = { .it_value = {1} }; struct itimerval t2 = { .it_value = {2} }; signal(1, handler1); sigemptyset(&s.sa_mask); sigaddset(&s.sa_mask, 1); sigaction(SIGALRM, &s, NULL); signal(SIGVTALRM, handler3); setitimer(ITIMER_REAL, &t1, NULL); setitimer(ITIMER_VIRTUAL, &t2, NULL); f(-513); /* -ERESTARTNOINTR */ write(1, "buggered\n", 9); return 1; } Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-17hwmon: (lm95241) Replace rate sysfs attribute with update_intervalGuenter Roeck
update_interval is the matching attribute defined in the hwmon sysfs ABI. Use it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17hwmon: (adm1031) Replace update_rate sysfs attribute with update_intervalGuenter Roeck
The attribute reflects an interval, not a rate. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17hwmon: (w83627ehf) Use proper exit sequenceJonas Jonsson
According to the datasheet for Winbond W83627DHG the proper way to exit the Extended Function Mode is to write 0xaa to the EFER(0x2e or 0x4e). Signed-off-by: Jonas Jonsson <jonas@ludd.ltu.se> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17hwmon: (emc1403) Remove unnecessary hwmon_device_unregisterYong Wang
It is unnecessary and wrong to call hwmon_device_unregister in error handling before hwmon_device_register is called. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17hwmon: (f75375s) Do not overwrite values read from registersGuillem Jover
All bits in the values read from registers to be used for the next write were getting overwritten, avoid doing so to not mess with the current configuration. Signed-off-by: Guillem Jover <guillem@hadrons.org> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17hwmon: (f75375s) Shift control mode to the correct bit positionGuillem Jover
The spec notes that fan0 and fan1 control mode bits are located in bits 7-6 and 5-4 respectively, but the FAN_CTRL_MODE macro was making the bits shift by 5 instead of by 4. Signed-off-by: Guillem Jover <guillem@hadrons.org> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17hwmon: New subsystem maintainersJean Delvare
Guenter Roeck volunteered to adopt the hwmon subsystem as long as he wasn't the only maintainer. As this was also my own condition, we can add the two of us as co-maintainers of the hwmon subsystem. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-09-17hwmon: (lis3lv02d) Prevent NULL pointer dereferenceKuninori Morimoto
If CONFIG_PM was selected and lis3lv02d_platform_data was NULL, the kernel will be panic when halt command run. Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com> Sigend-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-17GFS2: gfs2_logd should be using interruptible waitsSteven Whitehouse
Looks like this crept in, in a recent update. Reported-by: Krzysztof Urbaniak <urban@bash.org.pl> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-09-17md: fix v1.x metadata update when a disk is missing.NeilBrown
If an array with 1.x metadata is assembled with the last disk missing, md doesn't properly record the fact that the disk was missing. This is unlikely to cause a real problem as the event count will be different to the count on the missing disk so it won't be included in the array. However it could still cause confusion. So make sure we clear all the relevant slots, not just the early ones. Signed-off-by: NeilBrown <neilb@suse.de>
2010-09-17md: call md_update_sb even for 'external' metadata arrays.NeilBrown
Now that we depend on md_update_sb to clear variable bits in mddev->flags (rather than trying not to set them) it is important to always call md_update_sb when appropriate. md_check_recovery has this job but explicitly avoids it for ->external metadata arrays. This is not longer appropraite, or needed. However we do want to avoid taking the mddev lock if only MD_CHANGE_PENDING is set as that is not cleared by md_update_sb for external-metadata arrays. Reported-by: "Kwolek, Adam" <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-09-17Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: hpet: Work around hardware stupidity x86, build: Disable -fPIE when compiling with CONFIG_CC_STACKPROTECTOR=y x86, cpufeature: Suppress compiler warning with gcc 3.x x86, UV: Fix initialization of max_pnode
2010-09-16firewire: nosy: fix build when CONFIG_FIREWIRE=NStefan Richter
drivers/firewire/nosy* is a stand-alone driver that does not depend on CONFIG_FIREWIRE. Hence let make descend into drivers/firewire/ also if that option is off. The stand-alone driver drivers/ieee1394/init_ohci1394_dma* will soon be moved into drivers/firewire/ too and will require the same makefile fix. Side effect: As mentioned in https://bugzilla.novell.com/show_bug.cgi?id=586172#c24 this influences the order in which either firewire-ohci or ohci1394 is going to be bound to an OHCI-1394 controller in case of a modular build of both drivers if no modprobe blacklist entries are configured. However, a user of such a setup cannot expect deterministic behavior anyway. The Kconfig help and the migration guide at ieee1394.wiki.kernel.org recommend blacklist entries when a dual IEEE 1394 stack build is being used. (The coexistence period of the two stacks is planned to end soon.) Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix potential double put of TCP session reference
2010-09-16Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Optimize ticket spinlocks in fsys_rt_sigprocmask
2010-09-16Merge branch '2.6.36-fixes' of git://github.com/schandinat/linux-2.6Linus Torvalds
* '2.6.36-fixes' of git://github.com/schandinat/linux-2.6: drivers/video/via/ioctl.c: prevent reading uninitialized stack memory
2010-09-16Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia pcnet_cs: try setting io_lines to 16 if card setup fails pcmcia: per-device, not per-socket debug messages pcmcia serial_cs.c: fix multifunction card handling
2010-09-16Merge git://git.infradead.org/users/cbou/battery-2.6.36Linus Torvalds
* git://git.infradead.org/users/cbou/battery-2.6.36: apm_power: Add missing break statement intel_pmic_battery: Fix battery charging status on mrst
2010-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: Enable NXP LPC32XX support in Kconfig (resend) watchdog: ts72xx_wdt: disable watchdog at probe watchdog: sb_wdog: release irq and reboot notifier in error path and module_exit()
2010-09-16Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: fix formatting bug in register dumps arch/tile: fix memcpy_fromio()/memcpy_toio() signatures arch/tile: Save and restore extra user state for tilegx arch/tile: Change struct sigcontext to be more useful arch/tile: finish const-ifying sys_execve()
2010-09-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: wm8350-regulator - fix the logic of checking REGULATOR_MODE_STANDBY mode regulator: wm831x-ldo - fix the logic to set REGULATOR_MODE_IDLE and REGULATOR_MODE_STANDBY modes regulator: ab8500 - fix off-by-one value range checking for selector regulator: 88pm8607 - fix value range checking for accessing info->vol_table regulator: isl6271a-regulator - fix regulator_desc parameter for regulator_register() regulator: ad5398 - fix a memory leak regulator: Update e-mail address for Liam Girdwood regulator: set max8998->dev to &pdev->dev. regulator: tps6586x-regulator - fix bit_mask parameter for tps6586x_set_bits() regulator: tps6586x-regulator - fix value range checking for val regulator: max8998 - set max8998->num_regulators regulator: max8998 - fix memory allocation size for max8998->rdev regulator: tps6507x - remove incorrect comments regulator: max1586 - improve the logic of choosing selector regulator: ab8500 - fix the logic to remove already registered regulators in error path regulator: ab3100 - fix the logic to remove already registered regulators in error path regulator/ab8500: move dereference below the check for NULL
2010-09-16Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: add documentation
2010-09-16Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: only warn on mipmap size checks in r600 cs checker (v2) drm/radeon/kms: force legacy pll algo for RV620 LVDS drm: fix race between driver loading and userspace open. drm: Use a nondestructive mode for output detect when polling (v2) drm/radeon/kms: fix the colorbuffer CS checker for r300-r500 drm/radeon/kms: increase lockup detection interval to 10 sec for r100-r500 drm/radeon/kms/evergreen: fix backend setup drm: Use a nondestructive mode for output detect when polling drm/radeon: add some missing copyright headers drm: Only decouple the old_fb from the crtc is we call mode_set* drm/radeon/kms: don't enable underscan with interlaced modes drm/radeon/kms: add connector table for Mac x800 drm/radeon/kms: fix regression in RMX code (v2) drm: Fix regression in disable polling e58f637
2010-09-15drivers/video/via/ioctl.c: prevent reading uninitialized stack memoryDan Rosenberg
The VIAFB_GET_INFO device ioctl allows unprivileged users to read 246 bytes of uninitialized stack memory, because the "reserved" member of the viafb_ioctl_info struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-09-15[IA64] Optimize ticket spinlocks in fsys_rt_sigprocmaskPetr Tesarik
Tony's fix (f574c843191728d9407b766a027f779dcd27b272) has a small bug, it incorrectly uses "r3" as a scratch register in the first of the two unlock paths ... it is also inefficient. Optimize the fast path again. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-15watchdog: Enable NXP LPC32XX support in Kconfig (resend)Kevin Wells
The NXP LPC32XX processor use the same watchdog as the Philips PNX4008 processor. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15watchdog: ts72xx_wdt: disable watchdog at probeMika Westerberg
Since it may be already enabled by bootloader or some other utility. This patch makes sure that the watchdog is disabled before any userspace daemon opens the device. It is also required by the watchdog API. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15watchdog: sb_wdog: release irq and reboot notifier in error path and ↵Akinobu Mita
module_exit() irq and reboot notifier are acquired in module_init() but never released. They should be released correctly, otherwise reloading the module or error during module_init() will cause a problem. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Andrew Sharp <andy.sharp@lsi.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15pcmcia pcnet_cs: try setting io_lines to 16 if card setup failsDominik Brodowski
Some pcnet_cs compatible cards require an exact 16-lines match of the ioport areas specified in CIS, but set the "iolines" value in the CIS incorrectly. We can easily work around this issue -- same as we do in serial_cs -- by first trying setting iolines to the CIS-specified value, and then trying a 16-line match. Reported-and-tested-by: Wolfram Sang <w.sang@pengutronix.de> Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de> CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-15pcmcia: per-device, not per-socket debug messagesDominik Brodowski
As the iomem / ioport setup differs per device, it is much better to print out the device instead of the socket. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-15pcmcia serial_cs.c: fix multifunction card handlingDominik Brodowski
We shouldn't overwrite pre-set values, and we should also set the port address to the beginning, and not the end of the 8-port range. CC: linux-serial@vger.kernel.org Reported-by: Komuro <komurojun-mbn@nifty.com> Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-15arch/tile: fix formatting bug in register dumpsChris Metcalf
This cut-and-paste bug was caused by rewriting the register dump code to use only a single printk per line of output. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15arch/tile: fix memcpy_fromio()/memcpy_toio() signaturesChris Metcalf
This tripped up a driver (not yet committed to git). Fix it now. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15arch/tile: Save and restore extra user state for tilegxChris Metcalf
During context switch, save and restore a couple of additional bits of tilegx user state that can be persistently modified by userspace. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15arch/tile: Change struct sigcontext to be more usefulChris Metcalf
Rather than just using pt_regs, it now contains the actual saved state explicitly, similar to pt_regs. By doing it this way, we provide a cleaner API for userspace (or equivalently, we avoid the need for libc to provide its own definition of sigcontext). While we're at it, move PT_FLAGS_xxx to where they are not visible from userspace. And always pass siginfo and mcontext to signal handlers, even if they claim they don't need it, since sometimes they actually try to use it anyway in practice. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15arch/tile: finish const-ifying sys_execve()Chris Metcalf
The sys_execve() implementation was properly const-ified but not the declaration, the syscall wrappers, or the compat version. This change completes the constification process. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15drm/radeon/kms: only warn on mipmap size checks in r600 cs checker (v2)Alex Deucher
The texture base address registers are in units of 256 bytes. The original CS checker treated these offsets as bytes, so the original check was wrong. I fixed the units in a patch during the 2.6.36 cycle, but this ended up breaking some existing userspace (probably due to a bug in either userspace texture allocation or the drm texture mipmap checker). So for now, until we come up with a better fix, just warn if the mipmap size it too large. This will keep existing userspace working and it should be just as safe as before when we were checking the wrong units. These are GPU MC addresses, so if they fall outside of the VRAM or GART apertures, they end up at the GPU default page, so this should be safe from a security perspective. v2: Just disable the warning. It just spams the log and there's nothing the user can do about it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <glisse@freedesktop.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-15Merge ssh://master.kernel.org/home/hpa/tree/secLinus Torvalds
* ssh://master.kernel.org/home/hpa/tree/sec: x86-64, compat: Retruncate rax after ia32 syscall entry tracing x86-64, compat: Test %rax for the syscall number, not %eax compat: Make compat_alloc_user_space() incorporate the access_ok()
2010-09-15MN10300: Fix up the IRQ names for the on-chip serial portsDavid Howells
Fix up the IRQ names for the MN10300 on-chip serial ports in the driver as request_interrupt() no longer allows names containing slashes, giving a warning like the following if one is encountered: ------------[ cut here ]------------ WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0x62/0x7c() name 'ttySM0/Rx' Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-15Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not defined mtd: mxc_nand: configure pages per block for v2 controller mtd: OneNAND: Fix loop hang when DMA error at Samsung SoCs mtd: OneNAND: Fix 2KiB pagesize handling at Samsung SoCs mtd: Blackfin NFC: fix invalid free in remove() mtd: Blackfin NFC: fix build error after nand_scan_ident() change mxc_nand: Do not do byte accesses to the NFC buffer.
2010-09-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix hiddev's use of usb_find_interface HID: fixup blacklist entry for Asus T91MT HID: add device ID for new Asus Multitouch Controller HID: add no-get quirk for eGalax touch controller HID: Add quirk for eGalax touch controler. HID: add support for another BTC Emprex remote control HID: Set Report ID properly for Output reports on the Control endpoint. HID: Kanvus Note A5 tablet needs HID_QUIRK_MULTI_INPUT HID: Add support for chicony multitouch screens.
generated by cgit v0.10.2 at 2024-09-21 21:25:50 (GMT)