summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-10V4L/DVB (6313): ivtv: Replace list_for_each+list_entry with list_for_each_entryTrent Piepho
Also fixed a few cases of cut&paste errors where 'buf' would be set to the first entry in the list prior to be used as the loop iterator. In one case the value of buf was used before it was changed, but the rest were unnecessary. There was one list_for_each+list_entry loop that wasn't changed, since it depending on the loop iterator being left as NULL if the list was empty. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> CC: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6312): cx88: Replace list_for_each+list_entry with list_for_each_entryTrent Piepho
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6311): dvb: Replace list_for_each+list_entry with list_for_each_entryTrent Piepho
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6308): V4L: zc0301, remove bad usage of ERESTARTSYSJiri Slaby
zc0301, remove bad usage of ERESTARTSYS down_read_trylock can't be interrupted and so ERESTARTSYS would reach userspace, which is not permitted. Change it to EAGAIN Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6307): V4L: w9968cf, remove bad usage of ERESTARTSYSJiri Slaby
w9968cf, remove bad usage of ERESTARTSYS down_read_trylock can't be interrupted and so ERESTARTSYS would reach userspace, which is not permitted. Change it to EAGAIN Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6306): Few clenups for saa7134 resume codeMaxim Levitsky
*Disable DMA explictly on suspend *Enable DMA on resume, after all buffers were configured *Disable overlay on resume - apps should enable it when X is resumed Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6305): V4L: videobuf-core.c avoid NULL dereferences in videobuf-coreBrandon Philips
The return value of videobuf_alloc() is unchecked but this function will return NULL on an error. Check for NULL and make videobuf_reqbufs() return the number of successfully allocated buffers. Also, fix saa7146_video.c and bttv-driver.c to use this returned buffer count. Tested against the vivi driver. Not tested against saa7146 or bt8xx devices. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6301): pvrusb: Update DEBUGIFC sysfs to kernel 2.6.13+Trent Piepho
The prototypes for the show and store methods of a device_attribute changed in kernel 2.6.13, but the code in pvrusb2 was never updated. I guess the DEBUGIFC stuff isn't used much.... Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6300): CodingStyle cleanupTrent Piepho
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6299): dvb: Add dependencies for VIDEOBUF_DVBTrent Piepho
It needs to select VIDEOBUF_GEN and VIDEOBUF_DMA_SG, since it uses those modules. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6297): cx23885: remove wrong Kconfig selection of VIDEOBUFMichael Krufky
fix bad Kconfig dependency of cx23885 module. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6296): dib0700: add support for AverMedia DVB-T Express cardJoachim Steiger
add Avermedia dvb-t express card 34 (usb2) id Signed-off-by: Joachim Steiger <roh@hyte.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6295): saa7134: add autodetection for KWorld ATSC-115Eric Sandeen
Recognize the KWorld ATSC115 PCI ID as a hardware clone of the ATSC110. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6293): V4L: convert struct class_device to struct deviceKay Sievers
The currently used "struct class_device" will be removed from the kernel. Here is a patch that converts all users in drivers/media/video/ to struct device. Reviewed-by: Thierry Merle <thierry.merle@free.fr> Reviewed-by: Mike Isely <isely@pobox.com> Reviewed-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6292): videobuf_core init always require callback implementationMauro Carvalho Chehab
In the past, videobuf_queue_init were used to initialize PCI DMA videobuffers. This patch renames it, to avoid confusion with the previous kernel API, doing: s/videobuf_queue_init/void videobuf_queue_core_init/ Also, the operations is now part of the function parameter. The function will also add a test if this is defined, otherwise producing BUG. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6291): Fix: avoid oops on some SMP machinesMauro Carvalho Chehab
This workaround fix a bug that happens on some SMP machines. On those machines, videobuf_iolock is called too soon, before file .mmap handler. This patch calls the scheduler before iolocking, allowing it to properly call the pending mmap. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6290): remove videobuf_set_pci_opsMauro Carvalho Chehab
Before the videobuf redesign, a procedure for re-using videobuf without PCI scatter/gather where provided by changing the pci-dependent operations by other operations. With the newer approach, those methods are obsolete and can safelly be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6289): Remove reference to dead CONFIG_UST and ust.h headerRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6287): Fix DMA Scatter/Gather constructorMauro Carvalho Chehab
cx23885 driver were converted to use the newer videobuf support. Unfortunately, the constructor weren't changed. This causes an oops, since the abstract methods (implemented as callbacks) aren't defined. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-10V4L/DVB (6286): Add support for MSI TV @nywhere A/D NBMauro Carvalho Chehab
This is a Lifeview hybrid OEM board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6285): Remove pointless kmalloc() return value cast in Zoran PCI ↵Jesper Juhl
controller driver No need to cast the void pointer returned by kmalloc() in drivers/media/video/zoran_driver.c::v4l_fbuffer_alloc(). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6284): cx23885: Update to new videobuf codeTrent Piepho
cx23885 was still uses the old video-buf includes and code, which would only `work' if one happened to be compiling against a kernel that had the old headers. Even then, it wouldn't actually work, it would just compile without errors. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6283): videobuf: Remove references to old Kconfig option nameTrent Piepho
CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB. But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver. The reference in cx23885.h should just be removed, as the code there needs to be included if DVB is on or off. I do not think you can even compile the cx23885 driver without DVB. It's clearly just leftover from when the file was obvious copied from the cx88 driver (which is not mentioned in the copyright BTW). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6279): en_50221: convert to kthread APIChristoph Hellwig
Here's an attempted update to the full kthread API + wake_up_process: Signed-off-by: Andrew Morton <akpm@linux-foundation.org> CC: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6278): Buf: fix typo that caused data loss when readng streams from ↵Maxim Levitsky
device If videobuf_read_stream reads two or more buffers it was overwriting the first one Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6277): vivi cleanup: remove the unused varsMauro Carvalho Chehab
Vivi driver is now simpler. This patch removes the now unused vars. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6276): V4L: videobuf-core.c lock before streaming checkBrandon Philips
The reading/streaming fields are used for mutual exclusion of the queue and should be protected by the queue lock. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6275): V4L: vivi.c remove the "resource" lockingBrandon Philips
The "resource" locking in vivi isn't needed since streamon/streamoff/read_stream do mutual exclusion using q->reading/q->streaming. Plus it is sort of broken: a) res_locked() use in vivi_read() is racey. b) res_free() calls mutex_lock twice causing streamoff to break Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6274): V4L: vivi.c replace logic in vivi_poll with videobuf_poll_streamBrandon Philips
Since vivi is using videobuf_read_stream() it can use videobuf_poll_stream() now. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6273): V4L: vivi.c vidioc_try_fmt_cap() negotiate a valid fieldBrandon Philips
If the client provides V4L2_FIELD_ANY vivi should return a valid field :) Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6272): V4L: properly fix support for capturing interlaced video in ↵Maxim Levitsky
saa7134 By "capturing interlaced video" I mean that card ensures that top field is really top and vice versa (I think it takes the filed ID from signal) Properly turn on/off that support depending on signal state Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6271): V4L: Add basic support for suspend/resume for saa7134Maxim Levitsky
This adds support for suspend/resume for core of saa7134 Should fix bug#7220 Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6270): V4L: Honor dev->ctl_invert when setting up the decoder in ↵Maxim Levitsky
saa7134 When user sets dev->ctl_invert, driver writes negative values to SAA7134_DEC_LUMA_CONTRAST and SAA7134_DEC_CHROMA_SATURATION, but general code that initializes decorder ignores that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6269): V4L: Fix a "scheduling while atomic" bug in saa7134Maxim Levitsky
set_tvnorm can sleep in saa7134_i2c_xfer (it will be called through tuner code) but code calls it under spinlock. Fix that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6268): V4L: Fix a lock inversion in generic videobuf codeMaxim Levitsky
videobuf_qbuf takes q->lock, and then calls q->ops->buf_prepare which by design in all drivers calls videobuf_iolock which calls videobuf_dma_init_user and this takes current->mm->mmap_sem on the other hand if user calls mumap from other thread, sys_munmap takes current->mm->mmap_sem and videobuf_vm_close takes q->lock Since this can occur only for V4L2_MEMORY_MMAP buffers, take current->mm->mmap_sem in qbuf, before q->lock, and don't take current->mm->mmap_sem videobuf_dma_init_user for those buffers Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6266): videobuf cleanup: mmap check is common to all videobuf. Make ↵Mauro Carvalho Chehab
it at core Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6265): Prevent for calling mmap_free without an allocated bufferMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6264): Make the vertical lines to moveMauro Carvalho Chehab
While this is not the standard color bar behaviour, having some movement there allows to check if buffers are being properly handled. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6263): Fix buffer release codeMauro Carvalho Chehab
Release code should happen before the cleaning of map variable. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6262): An allocation error message were being printed as a debug msgMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6261): Cleans mem->vmalloc after vfreeMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6260): Fix Kconfig dependencyMauro Carvalho Chehab
Thanks to Michael Krufky for pointing this to me. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6259): Fix vivi poll() methodMauro Carvalho Chehab
Due to the replace of videobuf_read_one to videobuf_read_stream, poll() method implementation is wrong. This fixes poll() implementation, making read of /dev/video? to work again. With this method, an USB driver can use video-buf, without needing to request memory from the DMA-safe area. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with ↵Mauro Carvalho Chehab
the other patches Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6256): Remove the obsolete video-buf moduleMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6255): Convert vivi to use videobuf-vmallocMauro Carvalho Chehab
This patch removes the usage of videobuf-dma-sg from vivi driver, using instead videobuf-vmalloc. This way, vivi will be useful for testing the newer method. Reverting this patch won't hurt vivi, since both methods work fine. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6254): Add videobuf-vmallocMauro Carvalho Chehab
Adds a newer videobuf-vmalloc module. This module uses the same videobuf controls, but implements memory allocation based on vmalloc methods. With this method, an USB driver can use video-buf, without needing to request memory from the DMA-safe area. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6253): Convert vivi to use the newer videobuf-dma-sg moduleMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6252): Adapt drivers to use the newer videobuf modulesMauro Carvalho Chehab
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6251): Replace video-buf to a more generic approachMauro Carvalho Chehab
video-buf currently does two different tasks: - Manages video buffers with a common code that allows implementing all the V4L2 different modes of buffering; - Controls memory allocations While the first task is generic, the second were written to support PCI DMA Scatter/Gather needs. The original approach can't even work for those video capture hardware that don't support scatter/gather. I did one approach to make it more generic. While the approach worked fine for vivi driver, it were not generic enough to handle USB needs. This patch creates two different modules, one containing the generic video buffer handling (videobuf-core) and another with PCI DMA S/G. After this patch, it would be simpler to write an USB video-buf and a non-SG DMA module. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
generated by cgit v0.10.2 at 2024-11-14 23:05:38 (GMT)