summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-01-18[PATCH] e1000: Added driver commentsJesse Brandeburg
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e1000: Fix whitespaceJesse Brandeburg
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e1000: Added functions declarationsJesse Brandeburg
Added e1000_mc_addr_list_update Added e1000_read_reg_io Added e1000_enable_pciex_master These are not static functions, that is why we have them declared in the header. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e1000: Added functions to save and restore configJesse Brandeburg
These functions help restore the driver to active configuration when coming out of resume for power management. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e1000: Added RX buffer enhancementsJesse Brandeburg
Align the prefetches to a dword to help speed them up. Recycle skb's and early replenish. Force memory writes to complete before fetching more descriptors. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e1000: Added disable packet split capabilityJesse Brandeburg
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[SERIAL] Add 8250 support for Decision Computer International Co. PCCOM2Alon Bar-Lev
There is a new device which is look like: Serial controller: Decision Computer International Co. PCCOM2 (rev 02) (prog-if 02 [16550]) 0700: 6666:0004 (rev 02) (prog-if 02) Flags: medium devsel, IRQ 177 Memory at fe000000 (32-bit, non-prefetchable) [size=128] I/O ports at e880 [size=128] I/O ports at e400 [size=256] It has two 16550A, and is not listed in kernel, although the manufacturer clams that it is supported... I've created the following patch, it only add the new PCI id and the card to the repository, it seems to work. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-18[SERIAL] Fix serial8250 driver initialisation orderingRussell King
Commit 7493a314cb83797ce612a577475aacaedc553fed changed the ordering of the registration of the platform device driver vs the 8250 drivers internal initialisation. This led to the probe function being called before the driver had finished its internal initialisation, causing mayhem. Revert the ordering change. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-18[IPV4]: RT_CACHE_STAT_INC() warning fixAndrew Morton
BUG: using smp_processor_id() in preemptible [00000001] code: rpc.statd/2408 And it _is_ a bug, but I guess we don't care enough to add preempt_disable(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18Merge git://oss.sgi.com:8090/oss/git/xfs-2.6Linus Torvalds
2006-01-18Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-01-18Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-01-18[XFS] Fix a race in xfs_submit_ioend() where we can be completing I/O forDavid Chinner
a page while we are still submitting other buffers on the same page for I/O. SGI-PV: 948197 SGI-Modid: xfs-linux-melb:xfs-kern:25004a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-01-18Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2006-01-18Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2006-01-18[PATCH] Fix sparse parse error in lppaca.hBryan O'Sullivan
sparse can't parse a struct definition in include/asm-powerpc/lppaca.h, even though gcc can accept it. The form looks like this: struct __attribute__((whatever)) foo { }; An equivalent that both gcc and sparse can handle is struct foo { } __attribute__((whatever)); This is the only definition of this type in the tree, and fixing it is easier than fixing sparse. Signed-off-by: Bryan O'Sullivan <bos@serpentine.com> [ Side note: fixing sparse wouldn't be hard, but the "attribute at the end" version is the canonical one, and the one that makes sense. So let's just fix the kernel instead. Luc Van Oostenryck already sent out a sparse patch to the sparse mailing list in case anybody cares. -- Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18[PATCH] skge: fix dma mask setup.Stephen Hemminger
There are a couple of problems in the DMA setup code for skge. * In the 64 bit case, it doesn't set the consistent mask. * In the 32 bit case, the error check is backwards! It likely will only be visible as a bug on 64 bit platforms. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] libata: Code for the IRQ mask flagAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Somewhat cleaner in the resync as someone cleaned up the pio xfer users Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] libata: Fix sector lock to apply to both drives not drive 0 twiceAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] libata: Fix heuristic typos add LBA48PIO flag and support code, add ↵Alan Cox
IRQ flag for next diff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] Intel ICH8 SATA: add PCI device IDsJason Gaston
Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] Fix warning with b44.c on 64bit boxesAlan Cox
sizeof() return is not an int, so use max_t to get the types right. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: 0.13 versionStephen Hemminger
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: more conservative transmit lockingStephen Hemminger
Be more careful about transmit locking, this solves a possible race between tx_complete and transmit, that would cause a tx timeout. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: don't inline so muchStephen Hemminger
Don't need to inline quite so many routines, let the compiler decide Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: use kzallocStephen Hemminger
Can use kzalloc here. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: ratelimit error messagesStephen Hemminger
Make sure and rate limit all the error messages that might occur. If a problem occurs then a few messages are enough. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: optimize for 32 bit dmaStephen Hemminger
Small optimization, if dma addresses are 32 bits, then high bits are always zero. Signed-off-by: Stephen Hemminger <shemminger@osdl.or> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: don't bother clearing status ring elementsStephen Hemminger
Don't need to zero out the status ring entries after processing. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: write barrier'sStephen Hemminger
Be more careful about memory barriers. The only place we really need them is before and after updating the chip's ring interface. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: fix ram buffer for Yukon FE rev 2Stephen Hemminger
Fix problems with Yukon FE rev 2 chipset. Don't cut and paste bugs in from sk98lin driver. Change how the ram buffer is divided up, and make the math clearer. Also, set the thresholds where rx takes precedence. The threshold values are just guesses at this point, it might be worth tuning them later. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: version 0.12Stephen Hemminger
Version update. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: call pci_set_consistent_dma_maskStephen Hemminger
Need to call pci_set_consistent_dma_mask in the case of 64 bit DMA. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: receive buffer alignmentStephen Hemminger
Need to make sure that sky2 receive buffers are 64 bit aligned. Also, don't need to start off with GFP_ATOMIC on initial setup. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e100: e100 whitespace fixesJesse Brandeburg
e100: e100 whitespace fixes These are whitespace only fixes. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e100: Handle the return values from pci_* functionsJesse Brandeburg
e100: Handle the return values from pci_* functions This is to resolve warnings during compile time. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)Jesse Brandeburg
e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue) Set the end of list bit to cause the hardware's transmit state machine to work correctly and not prevent management (BMC) traffic. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[SOUND]: sparc/cs4231: Fix some typos which wrecked the build.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-17[SPARC]: Fix sbusfb build.David S. Miller
sbusfb_compat_ioctl() needs to return int, not long, as that is what the fb_ops->fb_compat_ioctl method prototype wants. Need to git rid of the "struct file *file" first argument to fbiogetputcmap() and fbiogscursor() to match calls done in sbusfb_compat_ioctl(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-17[TIPC] Avoid polluting the global namespacePer Liden
This patch adds a tipc_ prefix to all externally visible symbols. Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-17[TIPC] Group protocols with sub-options in KconfigPer Liden
This is just a cosmetic change that moves the TIPC configuration entry next to the other protocols that also have sub-options. Makes the the networking options menu look a bit better. Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-17[TIPC] Add help text for TIPC configuration optionPer Liden
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-17[TIPC] Remove unused #includesPer Liden
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-17[TIPC] Move ethernet protocol id to linux/if_ether.hPer Liden
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-17[TIPC] Provide real email addresses in MAINTAINERSPer Liden
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-17[TIPC] Updated link priority macrosPer Liden
Added macros for min/default/max link priority in tipc_config.h. Also renamed TIPC_NUM_LINK_PRI to TIPC_MEDIA_LINK_PRI since that is a more accurate description of what it is used for. Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-17[TIPC] Minor changes to #includesJon Maloy
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
2006-01-17[SPARC]: change if() BUG(); to BUG_ON in iommu.cEric Sesterhenn
this patch changes if() BUG(); constructs in iommu.c to BUG_ON(); so it gets save to define BUG() and BUG_ON() to nullstatements. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-17ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable miscTony Lindgren
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-17ARM: OMAP: 3/4 Fix clock framework to use clk_enable/disable for omap2Tony Lindgren
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v0.10.2 at 2024-11-10 13:39:51 (GMT)